View Bid Results For Laboratory Vibrators Tenders

We found 410 Bid Results related to laboratory vibrators tenders. You can find Contractor details who won laboratory vibrators tenders along with contract details in Bid awards announcements section.

Indian Tenders
11
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
239
128
43
Tender Publishing Platform
27
383
State / UT
28
196
51
26
22
19
14
12
10
10
7
6
5
4
4
3
3
3
2
2
2
2
1
1
1
1
1
1
1
Contract Value
181
88
98
43
Publish Date
0
0
0
0
0
Sector
15
179
75
53
32
31
9
7
5
4
4
4
2
2
2
1
Ownership
6
291
54
44
18
2
1
Within keyword
Active filters:
Showing 1–9 of 410 tenders matching your filters
1.
Public Administrative Department #11290947 Technical Bid
Tender for Cartage Of Malva, Silt, Sludge Kankar And Other Disposable Organic Material Etc. All Complete With Labour T&P Including Cartage Of 8 Km. (Chapter No.3 Si.No.8) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (1 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (2 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (3 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Earth Work In Filling In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 8Km. Form The Foundation Trenches Including Royalty@ 9.00 Per Cum. (Chapter No.4 Pwd.Sch.-253(A)+ Cptr No. 3 1 To 8 Km.) , Earth Work In Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Earth Work In Excavation In Foundation In Ordinary Soil Mixed With Moorum Shingle Kankar Requiring The Use Of Special Tools And Plants Such A Pick Axes Subbals Etc. Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Extra For Earth Work In Embankment Mechanically Compacted To 98% Proctor Density Ln Ordinary Soil, Excavation To Be Done Form Of Regular Pits Not Exceeding 0.5Mtr In Depth And Work In Embankment To Be In 20Cm Layer Including Ramming And Dressing Pulverization Surfacing Including Supply Of Labour, T&P, Roller And Water Sprinkle , Back Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50M And Lift Upto 1.5 M Incl. Cost Of All Labor Complete As Per Specifications , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 1.50M To 3M. , Supply & Fixing 3.5Kg And Or As Specified By The Manufacture, Harderner In Trexim Concrete Per Sqm. , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 3.00M To 4.50M. , Cleaning Jungles Including Uprooting Of Trunk Vegetation Grass, Bushes, Wood Trees And Sapling Of Girth Upto 30Cm Measured At A Height Of 1 Meter Above Ground Level And Removal Of Rubbish Upto A Distance Of 50 Meters Out Side The Periphery Of Area Cleared. , Removal Of Silt For Nala/Nali In Liquid Mud Or Faul Position With Special T&P Including Lead 30M And Lift Up To 3.00M Etc. All Complete. (As Per Attached Sanctioned Rate Analysis) , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 4.50M To 6.00M. , Earth Work In Cutting Or In Embankment In Ordinary Soil Excavation To Be In The Form Of A Regular Pits Not Exceeding 0.50M In Depth And Earth Work In Embankment To Be In 20Cm Layers Including Ramming And Dressing The Surface To Required Lavels And Slops And Also Including 1.5 M Lift And 30 M Lead. The Earth In Form Of Cutting (B) To Be Used As Spoil Banks Within 50M Distance As Directed By The Engineer-In-Charge Etc. All Complete. (4-Chapter Si.No.3) , Sand Filling In Plinth Including Supply Of Necessary Quality Of Local Sand From A Distance Not Exceeding 8 Kms From The Site Of Work And Including Watering Dressing Etc.Required For Proper Completion Of Work (Chapter No.4 Si.No.6 ) , Providing And Laying Cement Concrete In 1:5:10 (1 Cement :5 Fine Sand 10 Stone Ballast 40 Mm Gauges) And Curing Complete, Including Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.1) , Providing And Laying Cement Concrete In 1:4:8 (1 Cement:4 Coarse Sand :8 Graded Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors (5-Chapter Sr.No.2) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand :6 Gladed Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.3) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand:6 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors. (5-Chapter Sr.No.5) , Providing And Laying Cement Concrete In 1:2:4 (1 Cement: 2 Coarse Sand :4 Graded Stone Aggregate 40 Mm Noffrinal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors..(5-Chapter Sr.No.6 Si.No..4.1.3) , Providing And Laying Cement Concrete In 1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors. (5-Chapter Sr.No.7) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement -All Work Up To Plinth Level: 1:2:4 (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete , Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Up To Plinth Leuel:1:2:4 In Raft Foundation (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Trp To Plinth Level : 1:1.5:3 (1 Cement:1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) Ch-S Si No- 5,1.2 , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete,Slab Including The Cost Of Centering, Shutterang, Finishing And Excluding Reinforcement - Above Plinth Level Upto Fifth Floor Lable : 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Above Plinth Level Upto Fifth (V) Floor Lable , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Balconies, Shelves, Chajjas, Bands, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Including The Cost Of Centering, Shuttering, Finishing Exlcuding Reinforcement, With 1:1.5:3 In Heavier Beam (1 Cement: 1.5 Coarse Sand(Zone-Lll) : 3 Graded Stone). , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Work Up To Plinth Level (5-Chapter S.I. No.-16) , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Works Above Plinth Level Upto Floor V Level (5-Chapter S.I. No.-16) , Class-150 (Non Modular) Brick Work In 1:6 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.. ( Chapter No. 06 Sr.No. 1) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Foundation And Plinth Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapter No. 06 Sr.No. 2) , Class-150 (Non Modular) Brick Work In 1 :4 Cement And Fine Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Only 80Mm Thick Wall). (Chapter No. 06 Sr.No.3) , Class-150 (Non Modula0 Brick Work In L:3 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Chapter No. 06 Sr.No.4) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. (Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand Mortor In Super Structure Above Plinth Level Upto Floor Five Level For Wall Thickness More Than 12Cm. Including Supply Of All Material, Labour And Tools And Plants Etc. All Complete. {Chapter No.6 Si.No.2+6} , Add Extra To Ltem No. 1 To 4 Above For Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 12Cm And Less. (Chapte No. 06 S.I. No. 2+4) , Add Extra To Ltem No. 1 To 4 Above But In Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 8Cm And Below. (Chapte No. 06 S.I. No. 2+4) , Providing And Laying Damp-Proof Course 40 Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.1} , Providing And Laying Damp-Proof Course 25 Mm Thick With Cement Concrete 1:2.4 (1 Cement : 2 Coarse Sand :4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.2} , Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Vg-10 Of Approved Quality Using 1.7K9 Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With Piece Of Cloth Lightly Soaked In Kerosene Oil.. {Chapter No.07 Si.No.3} , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (A) 35Mm Thick. (Chapter No.9 Si.No.1-9.21.1) , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (2) 30Mm Thick. (Chapter No.9 Si.No.1-9.21.2) , Providing & Fixing 1.00 Mm Thick Decorative High Pressure Laminated Sheet Of Plain/Wood Grain In Gloss/Matt/Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Uality Conforming To Is : 2046 Type S, Including Cost Of Aadhesive Of Approved Quality. , Providing And Fixing Factory Made Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19 Mm X 19 Mm For Styless And 15X15 Mm For Top & Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture. M.S. Frame Covered With 5 Mm Thick Heat Moulded Pvc C Channel Of Size 30 Mm Thickness, 70 Mm Width Out Of Which 50 Mm Shal Be Flat And 20 Mm Shalll Be Tapered In 45 Degree Angle On Both Sides Forming Styless And 5 Mm Thick, 95 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree On The Inner Side To Form Top And Bottom Rail And 115 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered On Both Sides To Form Lock Rail And Lock Rails Shall Be Top, Bottom And Lock Rails Shall Be Provided Both Sides Of The Panel. 10 Mm (5 Mm X 2) Thick, 20 Mm Wide Cross Pvc Sheet Be Provided As Gap Insert For Top Rail & Bottom Rail. Paneling Of 5 Mm Thick Both Side Pvc Sheet To Be Fitted In The M.S. Frame Welded/Sealed To The Styles & Rails With 7 Mm (5 Mm + 2 Mm) Thick X 15 Mm Wide Pvc Sheet Beading On Inner Side, And Joined Together With Solvent Cement Adhesive. An Additional 5 Mm Thick Pvc Strip Of 20 Mm Width Is To Be Stuck On The Interrior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge, Manufacturers Specification & Drawing.30 Mm Thick Pre Laminated Pvc Door Shutters , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Ls: 1868, Minimum Anodic Coating Of Grade Ac 15) , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 5.5 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 8.0 Mm Thickness , Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315 , Having Brand Logo Embossed On The Body/ Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors ,Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor . Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Entineer-In-Charge. With Stainless Steel Cover Plate Minimum 1.25 Mm Thickness. , Providing And Tixing Factory Made Upvc White Colour Casement/ Casement Cum Frxed Glazed Door Comprising Of Upvc Multi-L Chambered Frame. Sash And Mullion (Where Ever Required) Extrlcled Profiles Dl,Ly Reinforced With 1.60 T 0 2 Mm Thick I Galvalized Mild Steel Section Made From Roll Forming Process Of Iequrred Length {Shape & Size According To Upvc Profile), I Ldvc Extruded Glazing Beads Of Appropriate Dimension. Epdi\/L Gasket. Znc Alloy (White Powder Coated) 3D Hrnges And One Handle On Each Side Of Panels Along With Zinc Plated Mild Steel Rnulti Point Locking Having Transmission Gear, Cylinder With Keeps And One Sicle Key, G.L Fasteners 100 X I Mm Size For Fixing Frame To Finished Wall And Necessary Stainless Steel Screws Etc. Profile Of Frame & Sash Shall Be Mitred Cut And Fusion Welded At All Corners, Mullion (If Required) Shall Be Also Fusion Weldecl Including Drilling Of Holes For Fixing Hardwares And Drainage Of Water Etc. Afier Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Of Required Size And Of Approvecl Quality, All Complete As Per Approved Drawing & Cllrection Of Engineer-In-Charge. (Single I Double Glass Panes And Sllicon Sealent Shall Be Paid Separately) Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5% Tolerance In Dlrnension I.E. In Depth & Width Of Profile Shall Be Acceptable Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. Casement Door With 3D Hinges Made Of (Big Series) Frame 67 X 64 Rm & Sasn 67 X 1 10 Mm Both Having Wall Thickness Of 2.3 I 0.2 ^Rr Ancl Single Glazing Bead / Double Glazing Bead Of Lappopiate D.Mersion. (Area Of Door Upto L2 00 Sqm). , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Structural Steel Work In Single Section, Fixed With Or Withoul Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting,Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required Heavy Size Such As Trusses Built , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Apptying A Priming Coat Of Approved Steel Primer.(Chapter No.10 Si.No.4-10.3) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pjpe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\4.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover (Upto 10.00 Sqm).(Chapter No.10 Si.No.4-10.5) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\Il.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X,1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters. Exceeding 10.00 Sqm And Upto 16.80 Sqm/Above In The Area , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc, Complete. Hot Finished Welded Type Tubes , Supply And Fixing Stainless Steel (Grade 304) Ralling Made Of Hollow Tubes, Channels, Plates Etc. Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Steel Nuts And Bolts Complete. I/C Fixing The Ralling With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts Fasteners Etc.). (Chapter No.10 Si. No. 14 New) , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Galvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1 .4 Mm Aperture On Both Sides , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Stainless Steel (Grade 304) Wire Gauze Of 0.5 Mm Dia Wire And 1.4 Mm Aperture On Both Sides , Painting Top Of Roofs With Bitumen Of Approved Quality @ 17Kg Per 10 Sqm Impregasted With A Cost Of Coarse Sand At 60 Codm Per 10 Sgm, Including Cleaning The Slab Surface With Keroseme Oil Complete : With Residual Type Petroleum Bitmen Of Grade Vg-10 , Providing And Laying Integral Cement Based Water Proofing Itreatment Including Preparation Of Surface As Required For Itreatment Of Roofs, Balconies, Terraces Etc Consisting Of Lfollowing Operations: (A) Applying A Slurry Coat Of Neat Cement Lusing 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Lcompound Conforming To Ls. 2645 And Approved By I E Ng Ineer-In-Charge Over The Reinforced Cement Concrete Slab Including Adjoining Walls Lupto 300 Mm Height Including Cleaning The Surface Before Llreatment. B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 125 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 L Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Ofjunctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Lb : 2645 And Approved By Engineer-In-Charge (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix L:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Includlng Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finjshing The Surface With Lrowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge :Wth Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65Mm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 1.00 Mm Thick With Zinc Coating Not Less Than 275 Gm/Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 80 Mm Thick With Zinc Coating Not Less Than 275 Gm/ Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/ M , Providing And Laying Six Courses Water Proofing Teatment With Bitumen Felt Over, Roofs Consisting Of First, Third And Llfth Course Of Blown Bitumen 85/25 Or 9O/15 Conforming To Ls : 702 Applied Hot @ 1.45, L.2O And 1.45 Kg Per Square Metre Of Area Respitively, Second And Fourth Courses Of Roofing Felt Lype 3 Grade I Conforming To Ls : 1322 (Hessian Based Self Flnished ;Itumen Felt) , Sixth And Final Course Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6 Cubic Decimeter Per Sqm Iniluding Preparation Of Surface But Excluding Grading, Complete. , 10 Cm Thick (Average) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa @ 35 Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 (1 Clay: 1 Cow Dung) And Covered With Flat Tile Bricks, Grouted With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finished Neat: With Common Burnt Clay F.P.S.(Non Modular) Brick Tile Of Class Designation 10 , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineerin-Charge) 0 50 Mm (+ 0.05 %) Total Coated Hickness With Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Icrons Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge, The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roollng Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Ridges Plain (500 - 600Mm) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Ls: 12823 Grade Ltype Ll, In Anelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing 12 Mm Thick Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. I\4Arine Plywood Conforming To Ls: 710 , Providing And Fixing Tiled False Ceiling Of Specilled Materials Of Size 595X595 Mm In Lrue Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanlzed @ 120 Grams/ Sqtn, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel Lo Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening For Services Like Diffusers, Grills, Iight Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gl Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gl Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T- Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. Gl Metal Ceiling Lay In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm, And 0.5 Mm Thick With 8 Mm Drop; Made Of G Lsheet Having Galvanizing Of 100 Gms/Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending , Providing And Fixing False Ceiling At All Heights With Integral Densified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595mm Of Approved Texture, Design And Patterns Having Nrc (Noise Reduction Coefficient) Of 0.50 (Minimum) As Per Ls 8225:1987, Light Reflectance Of 85%(Minimum). Non Combustible As Per Bs:476 (Part-4), Fire Performance As Per Bsi476 (Part 6 &7), Humidity Resistance Of 100%, Thermal Conductivity 0.043 W/M K As Per Astm 518:1991,In True Horizontal Level Suspended On Inter- Locking Metal T-Grid Of Hot Dipped Galvanised Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 24X38 Mm Of Length 3000 Mm, Cross - T Of Size 24X32 Mm Of Length 1200 Mm And Secondary Intermediate Cross-T Of Size 24X32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E. 50 Mm Long, I Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Ol Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 460 Mm Center To Center And 40 Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-Incharge. With 15 Mm Thick Tegular Edged Light Weight Calcium Silicate False Ceiling Tiles. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:6 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of 1:4 Cement & Fine Sand (Not Less Than In 1.25 Fm) Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:3 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:4 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 20 Mm Cement Plaster 1:3 (L Cement:3 Coarse Sand) Linished With A Floating Coat Of Neat Cement. , 20Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding Bomm. Ln Girth And Finished Even And Smooth , 6Mm Thick Celling Plaster 1:3 (1 Cement :3 Fine Sand) Cement & Fine Sand In F.M Not Less Than 1.25, 1:3 Including Chipping Of Reinforced Cement Concrete Surface Before Celing Plaster. The Cost Of Including At Material, Labor T&P And Scafolding Etc Complete. (Chapter No.13 Si.No.13) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Morlar1:4 (1 Cement: 4 Coarse Sand) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Including 50Mm Thick Base With Concrete 1:4Rb Complete As Per E/L , Marble Tiles Stone Slabs 18 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With : Marble White Dhungriquality , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With: White Alebeta White Stone , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1: 4 (1 Cement: 4 Coarse Sand) : 25 Mm Thick , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm (Average) Thick Base Of Cement Moftar 1:5 (L Cement: 5 Coarse Sand)With Joints Finished Flush.Red Sand Stone , Prividing & Laying Ceramic Non Skid Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming Tq Ls : 15622 Of Approved Make In Colours Such As White, Lvory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Ioints With White Cement And Matching Pigment Etc., Complete. , Providing & Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Ls : 15622 (Thickness To Be Specified By The Manufacturer )Of Approved Make In Atl Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-Incharge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Morta|L:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 33Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Laying Vitrified Tiles 500X500mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providing And Laying Vitrified Tiles 600X600mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providlng And Laying Polished Granite Jet Black Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge.{Chapter No.14 Si.No.27} , Stone Work (Machine Cut Edges) For Wall Llning Etc. (Veneer Work) Upto10 Metre Height, Backing Filled With A Grout Of Avercge 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Polnting In White Cement Mortar 1:2 (1 White Cement R 2 Stone Dust) Wlth An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Plns Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Flne Dressed With Rough Backing. 30 Mm Thick , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. Including Curing The Cost Of All Material, Labour, T&P Etc. Complete. (Chapter No.15 Si.No.1) , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Ofwork. , Finishing Walls With Water Proofing Cement Paint Of Required Shade : New Work (Two Or More Coats Applied @ 3.84 Kg/10 Sqm) Supply Of All Labour Material And T&P Requlred For Proper Completion Of Work. , Finishing Walls With Textured Exterior Paint Of Required Shade New Work (Two Or More Coats Applied @ 328 Ll Lo Sqm) Over And Including Priming Coat Of Exterior Primer Applied @ 2.20K9/10 Sqm Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade ; New Work (Two Or More Coat Applied @ 1.67 Llth) Sqm Over And Including Priming Coat Ofexterior Primer Applied @ 2 20 Kg/10 Sqm) Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/L0 Sqm Over An Under Coat Of Primer Applled @ O.B0 Ltr/10 Sqm Of Approved Brand And Manufacture. Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacturb Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Paint Of The Two Coat Over Primer Coat Wood Surface And Etc. All Complete.(15-Chapter Si.No.8+10+11) , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Upto 10 Cm In Width , Applying Priming Coat: With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood) Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Of Work , Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade Two Or More Coats On New Work Includlng Cost Of All Materials, Labour T&P Etc. Required For Proper Completion Of Work Wood And Steel , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..One Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..Two Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Sudace Smooth Including Necessary Repairs To Scratches Etc. Complete. , Distempering With Lst Quality Acrylic Distember (Ready Mix) Having Voc Content Less Than 50 Grams/ Litre Of Approved Brand And Manufacture To Give An Even Shade:Old Work (One Or More Coats) , White Washing Wth Lime On Undecorated Wall Surface (One Coat) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , White Washing Wth Lime On Undecorated Wall Surface (Three Or More Coats) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , Colour Washing Such As Green, Blue And Other Coloures Or Buff To Give An Even Shade New Work Colour Washing (Two Coats) With A Base Coat Of White Washing With Limes Including Cost Of All T&P Other Complete Work. , Removing White Or Colour Wash By Scrapping And Sand Papering And Pteparing The Surface Smooth Including Necessary Repairs To Scratches Etc Complete , Demolishing Cement Concrete Manually Including Disposal Of Materialwithin 50 Metres Lead , Dismantling Reinforced Cement Concrete Or Reinforced Brick Work Including Stacking Of Materials As Directed By E/Ic With In A Distance Of 60 Meters (200 Feet). (17-Chapter Pwd. No.694) , Demolishing R.B. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-Incharqe. , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge In Cement Mortar. (17-Chapter Si.No.6) , Demolishing Stone Rubble Masonry Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Eng;Neer-In-Charge : Ln Lime Mortar , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead Of Area 3 Sq. Metres And Below , Dismantling Steel Work In Single Sections Including Dismembering And Stacking Within 50 Metres Lead In: R.S. Joists , Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. (17-Chapter Si.No.16) , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Wlthin 50 Metres Lead. , Dismantling Of Old Interlocking Tiles Pavement Including Staking Of Serviceable Material And Disposal Of Unserviceable Material Within Lead Of 50M As Per Direction Of Engineer In Charge. (Ns) , Random Rubble Masonry 1:6 (1 Cement: 6 Coarse Sand), With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size).Upto Plinth Level With , Random Rubble Masonry 1:6 (1 Cement : 6 Coarse Sand), With Hard Stone In Superstructure Above Plinth Level And Upto Floor Five Level, Including Leveling Up With Cement Concrete 1:6:12 (L Cement:6 Coarse Sand:12 Graded Stone Aggregaie 20 Mm Nominal Size) At Window Sills, Ceiling Level And The Like , 30 Mm Red Sand Stone Sun-Shade (Chisel-Dressed) Supported On Red Sand Stone Brackets, Fixed In Walls With Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Finishing Complete. , Providing And Fixing Red Sand Stone Jali 40 Mm Thick Throughout In Cement Mortar 1R3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc , Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Fine Dressed With Rough Backing. 30 Mm Thick (Chapter No.18 Si.No.7) , Supply And Fixing 500 Liter Pvc. Sintex Water Tank Etc. All Complete. (19-Chapter Sr.No.2(C)) , Laying Brick Soling Layer On Prepared Sub-Grade With Brick On End Edging According To Lines, Graded And Cross-Section Shown On The Drawing Filling Joints With Sand And Earth, Spreading 25 Mm Thick Layer Of Earth Over Brick Soling, Watering And Rolliing The Same With Three Wheel Road Roller 80-100 Kn As Per Technical Specification Clause 412 , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Constuction Of Un-Reinforced, Plain Cement Concrete Avement Thickness As Per Disign, Over A Prepared Sub Base With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M-30 (Grade), Coarse And Fine Aggregate Conforming To Is 383, Maximum Size Of Coarse Aggregate Not Exeeding 25Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Acapacity And Apporopriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork (Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film Wedges, Steel Plates Including Levelling The Formwork As Per Drawing), Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continous Aperation Including Provision Of Contraction, Expansion, Construction And Constructionl Joints, Applying Debonding Strips, Primer, Sealant, Dowel Bars, Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14 Days, Curing Comound (Where Apecified) And Water Finishing To Lines And Grade As Per Drawing And Technical And Technical Sepcification Clause 1501. (For Agra). (Chapter No.20 Si.No.12) , Construction Of Un-Reinforced, Plain Cement Concrete Pavement Over A Prepared Sub Base With Approve Grade Cement @ 400 Kg Per Cum, Coarse And Fine Aggregate Conforming To Ls 383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Batching And Mixing Plant As Per Approved Mix Design, Transported To Site, Laid With A Fixed Form Or Slip Form Paver, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints, Joint Filler, Separation Membrane, Sealant Prim Er, Joint Sealant, Debonding Strip, Admixtures As Approved, Curing Compound, Finishing To Lines And Grades As Per Drawing For Agra , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work.80 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Coloured) , Re-Laying Of I Shaped Precast Interlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50Kg) Including 25Mm Thick Loacal Sand Base Levelling And Ressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Comlete Work. Including Vat (Chapter No.20 Si.No.19 New Item) , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe. (Lnternal Work - Exposed On Wall) 32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 40Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 50Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 15 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 20 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 25 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 32 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 40 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 62.50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 75 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 100 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 150 Mm Nonrinal Dia Pipes , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 15 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 20 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 25 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 32 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 40 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 50 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 15 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 20 Mm Dia Nominal Bore , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 60X60x75 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 90X90x100 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 120X120x100 Cm Lnside , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Ls : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Lsl Marked White Solid Plastic Seat And Lid , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Two Urinal Basins With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Three Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Four Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require: (White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C. P. Brass Pillar Taps) {Chapter No.24 Si.No.5A} , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Single 15 Mm C.P. Brass Pillar Tap , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pajr Of 15 Mm C.P. Brass Pillar Taps , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm C.P. Brass Pillartap , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.6A) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350 Mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pi Pe, Spreaders With Unions And Clamps (All In C.P. Brass) With Waste Fitting As Per Ls:2556, C.L. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittlngs And Cutting And Making Good The Walls And Floors Wherever Requlred:Range Of Two Half Stall Urinals With 5 Litre Pvc. Automatic Flushing Cistern , Constructing Brick Masonary Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 455X610mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (A) Inside Dimensions 455X610mm And 45Cm Deep For Single Pipe Line : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.6A) , Constructing Brick Massonry Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 600X850mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (C) Inside Dimensions 600X850mm And 45Cm Deep For Pipe Line With Three Or More Inlets : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.8C) , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) Hindi Letters , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) English Letters , Reinforced Cement Concrete M15 Grade Boundary Pillars/ Wheel Guard Of Standard Design As Per Irc:25-1967, Fixed In Position Including Finishing And Lettering But Excluding Painting , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.2 Metre High , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.8 Metre High , Deduction Of Cost Brick/Bats. (Chapter No.1 Sr.No.2(C)) , Deduction Cost Of Material Old Workable Bricks Etc. All Complete. , Road Delinator Delinealor Supply & Fixing Of M S Delineator Made Of L\Lild Steel With Pllre Polyester Powder Coating With The Minimum Thickness Of Powder Coating Of Not Less Than 40 Micron For Prolectlon Against Corlosion The Surface Should Be Concealed So That There Sholrld Not Be Any Exposed Surface Wilhout Powder Coating. Alternatively, These Metal Guide Poles Can Be Concealed With Thermoplastic Body. The Posts Shall Have Lan Ellipsoidal Or Circular Design Wilh The Height Of The Pole Shall Be 800 To 900 Mm Above The Ground With About 200 To 300 Mm Base Which Can Be Anchored Onto The Ground Mild Steel Guide Poles Shall Conform To Type Xl Sheeting Specifications As Per Lrc67 And Ast Ii D4956 Which Would Ensure To Obtainl Clear Visibility Of The Road Alignment During Nighl Time. The Relro Reflective Sheeting Shall Be Tested For Acertificale Of Having The Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Iiner Removal, Adhesion,Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdooa Weathering And Ils Having Passed These Tests Shall Be Obta Ned From Lnlernational/Government Laboratory / Lnslitute By The Manufacturer Of The Sheeinq And In Case The Cerliflcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condillon Within 3 Years Of Launching Of Product By The Manufaclure In Abroad. Alternatively, A Certillcate Conforming To Astlvl Specification (D4956 09) On Adficial Accelerated Weatherlng Requirements From A Reputed Laboratory In Lndia Can Be Accepted providing Sionally. Ln Such A Siluation, The Employer / Clienl, If So Desires, Collld Seek For A Performance Guarantee Which Would Be Released Alter Receipt Of Certiflcate Meeting The Requ Rement Of Three Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Report Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour. T&P, Transportation, Installation And Incidentals All Complete As Per D Recllon Of The Engineerincharge , Road Marking With Hot Applied Thermoplastic Compound With Reflectrosing Glass Beads On Bituminous Surface. Providing & Laying Of Hot Applied Thermoplastic Compound 2.5Mm Thick Including Reflecto Rising Glass Beads @ 250Gm/Sqm. Area, Thickness Of 2.5Mm Is Exclusive Of Surface Applied Glass, Beads As Per I.R.C. 35. The Finish Surface To Be Level Uniform And Free Form Steaks And Holes Composition Of Thermoplastic Material Shall Be As Per Table 800-3 Of Clause 803 Of Morth Including Cost Of Work As Per Direction E/Ic. (Chapter-28 Si.No.2) , Road Marking With Hot Appliod Ths.Moplastic Compound With Roflsctorlsing Glass Boads On Bituminous Surface. (Ropoated / Tranvers Bar) Providing And Laying Of Hot Applied Thermoplastic Compound 5 Mm Thick Lncludlng Reflectorising Glass Beads 0) 5Oo Gms Per Sqm Area, Thickness Of 5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35-2015 The Llnished Surface To Be Level, Uniform And Free From Streaks And Holes , 6M Span Over Head Cantilever Structure With 300 Dia M S One Vertical Post Supply, Fxing & Erection Of Built Up Canllever Structure 6 M Span Comprising Of One Verllcal Posts Of 6.00 I!4 Helght Made Up Of 300 Mm Nb Heavy Class Ms Pipe As Verllcal Member Welded With 10 Mm I\,4S Plate At Top & 12 Mm M S Plate At Bottom. The Horizontal Truss Shall Comprise Of 50 Mm Dia Heavy Class M.S. Pipe And 40 Mm Dia Heavy M S Pipe As Bracing & 10 Mm Ms Plate At Bottom For Llxing To Vertical Post As Per Structure Design & Drawing Wilh One Of Steel Primer And Two Coats Of Synthetic Enamel Planl. The Work Includes Constrlrction Of Reinforced Cement Concrete Foundation Of Size 0.90X0.90X1 50 M Of Required Depth As Per Site Conditlon For Built Up Structure Including Earlh Work In Excavation 100 Mm Thick Lean Concrete In 113:6 Cement Coarse Sand And 40 Mm Gauge Stone Ballast And Reinforced Cement Concrete M25 Grade Concrete Including Supply And Fixing Of 25 Mm Dia Foundalion Bolts 600 Mm Long As Per Provision Of Structure Design Includlng Cost Of Reinforcemenl & Shuttering. The Lateral Vertical Clearances And Complete. Nstallaton Work Shall Be As Per Relevanl Clauses Of Mort&H Speciflcation Section 8Oo And Irc 67 2012 Complete In All Respect The Raies Shall Include Cost Of Deslgn Fabricalion, Supply, Kansportalion, Local Shifting Erection Of Signage Skucture Using Crane, Inclusive Of All Taxes Etc. All T&P Machine, Malerial And Labour Requiled For Proper Completion Of Work As Per Direclion Of Engineer-Ln-Charge. , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilhout Shank) , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilh Shank) , Flexible Median Marksr As Per Irc 79:2019: Flexible Lmedian N4arker (Flv4nl) Should Be Used For Improving Medlan Visib Lity Dlrring Dark Hours. , Use Of L/Edian ]Varker Provides Safely Againsl Colision Happening Wilh Med Ans During N Ght Lime , Or Sevete Weather Flexib E L\.4Edian Markers Shall Be Provided With Fluorescenl Yellow Colour Retro-Refleci Ve Sheeting Type Xl As Per Irc:87. Flexible Lt4edian Lmarker Shall Be Ol Lough, High Impact Resistant, Lnieclion Molded, Lhermoplastic Body With Propery Of Flexibility Io Provide High Durabilityand U Shape Structure Having Rebound / Bollnce Back Properly. The Sheeting Shall Be Of Type Xl Conforming To Lrcl67 And Ii Should Be On Both The Faces Whereby Providing Maximum Refleclivity At L,Anger Distances With Adequate Durabllity. The Logo Of The Manufacturer Shall Be Embossed On Either Side Of The Body During The Lnjection Molding Process. Fi\4M Shall Be Fixed By A Combination Bf Epoxy Adhesive And Grouting/ Drilling On Concrete Medians Or Property Conslructed Solid Medians Heighl: The Marker Height Shall Be A Minimum Of 180 Mm Width 120 Mm & Body Thickness: 6.5 Mm. The Shanks Shall Not Be Less Lhan 20 Mm And Depth Shall Not Be Less Than 30 Mm Reflective Area: Shall Not Be Less Than G0 Cm Square . Proof Of Lhe Same Report Shall Be Uploaded Which Quollng Lender. The Body Of Fn,4[,4 Shall Bounce Back To Ils Origlnal Position Of Afier 750 Number Of Hits Using Pendulum Of 1.8 Kg Conforming 40 Astm D256 Adhesion Between The Body And Outer Casing Body Of Fmi\4 Shall With Stand 50 Kg I Tensile Loads Conforming To Astm D63b Method. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer-Ln-Charge. , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Over 10 Cm. In Width , Linear Dstinoator Systsm (Lds) Supply & Fixing Of Linear Delineator System (Lds) Panels Made Of Micro Prismatic Retro Reflective Sheeting Type Xl Duly Laminated On Thin Aluminium Foil To A Unique Corrugated Shape To Provide Retro Reflection Across Wide Range Of Observaiions And External Angles. Eatch Lds Panel Should Be Of Nominal Lenglh Of 33 Inch And Each Ridge Shall Be Approximately 0.34 Inch High Each Lds Panel Is To Be Firmly Fixed On Existing Concrete/Brick Work With 16 Nos Fastner/ Screw , Retro-Roflectivesheeting Type-Lv With 4 Mm Thick Acm Single Side Providing & Flxing Of Reflective Signs With A Corrosion Resistant 4 Mm Thick Wlth 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Lace To Be Iully Covered With Hlgh Lntenslty Prlsmatic Sheetlng Type Lv As Per Irc-6712012 Relro Refleclive Sheeling With Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Elc Shollld Be As Per Morth Speciflcation No Bo1.3.7 .The Sheelng Shall Have A Pressure - Sensltive Adhesive Of The Aggressive - Tack Type Requiring No Heat , Solvent Other Preparation For Adhesion 10 A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acim (Aluminium Composite Materials) Shall Be Flxed On The Back Frame Nis Angle Wiih Riveting. Micro Prismalic Type Lv Retro Rellective Sheeting Conilrming 1O Astm 04956-09 Shall Be Pressure Lixed. The Retro Reflective Sheeting Shall Be Tested For A Cerlillcate Of Having The Sheeting Tesled For Coetllcient Of Retro Refleclion, Dayume Colour And Luminance, Shrinkage, Flexibilily, Liner Iemoval, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed Lhese Lesls Shall Be Obtained From Lnlemational/Government Laboratory/ Lnstitute By The Manufacture. Of The Sheetng And In Case The Certiflcate Is Oblalned From International Condilion, T Should Also Be Obtained From Lndian Condilion Within 3 Years Of Launching Of Producl By The Manufactllre In Abroad. Alternalively, A Cerliilcate Conforming To Astm Specification (D 4956-09) On Artiilcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, Lhe Employer/Client, If So Desires, Could Seek For A Petlotrnance Guarantee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirement Of Lhree Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo.T Shall Be Uploaded Whlch Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Lransportation, Installation And Lncidentals All Complete As Per Direction Of The Eng Neer-In-Charge. , Retro-Reflectivesheeting Type Iv With 4 Mm Thjck Acm Double Side: Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Lhlck With 0.4 To 0.5 Mm Both Side Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Tntensity Prismaiic Sheeling Type Lv As Per Irc-67:2012 Retro Reflective Sheeting With Back Frame Ms Angle Of 35X35x5 Mm Legends Letters , Numerals And Borders Elc Should Be As Per Morth Specification No801.3.7 The Sheeting Shall Have A Pressure - Sensitive Adhesive Of The Aggressive - Tack Type Requiring No Heai, Solvent Olher Preparation For Adhesion To A Smooth Clean Surface, Ln A Manner Recommended By The Sheeling Manufacturer. The Acn,4 (Aluminium Cornposite L\,4Aterials) Shall Be Ilxed On The Back Frame Ms Angle With Nveling. Micro Prismatic Type Lv Retro Refleclive Sheeting Conflrming Io Astm D4956-09 Shall Be Pressure Llxed. The Reko Reflective Sheeling Shall Be Tesled For A Cedificate Of Having The Sheeting Tested For Coemcient Oi Reko Reflection, Daytime Colour And Luminance, Shrinkage Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdoor Weatherlng And Its Having Passed These Tests Shall Be Obtained From Lnternallonal/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeting And In Case The Certificale Is Oblained From International Condition It Should Also Be Obta Ned From Lndian Condilion Wilhin 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certilicate Conforming 10 Astm Speciflcatlon (0 4958-09) On Aatiflclal Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepled Provisionally. Ln Sllch A Situation, The Employer/Client If So Desires, Could Seek For A Performance Guarantee Which Would Be Released Afler Receipl Of Cerlillcate Meeting The Requirement Of Lhree Years Outdoor Weathering Of The Sheeling As Per Irc 67I2012 & Proof Of The Same Repofl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installalion And Incidentals All Cornplete As Per Dlreclion Of The Engineer-In-Charge , Retro-Refle.Ctivesheeting Type-Xl With 4 Mm Thick Acm Single Side Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Thick With 0.4 To 0.5 Mm Both Slde Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Lntensity Prismatlc Sheeting Type Lv As Pet Irc-67:2012 Reko Reflective Sheeling With Back Frame L\,4S Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per L\Lorth Specification No_ 801.3.7 The Sheeting Shal Have A Pressure - Sensitive Adhesive Of The Aggressive Tack Type Requiring No Heal Solvent Other Preparation For Adhesion To A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acm (Alllminium Composite L\,4Aterlals) Shall Be Fixed On The Back Frame Ms Angle With Riveting. Micro Prismatic Type Lv Retro Reflective Sheeung Conflrming To Astlvl D4956-09 Shall Be Pressure Fixed. The Relro Reflective Sheeting Shall Be Tested For A Cefiilicate Of Having The Sheeting Tested For Coeificient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Iungus Resistance. 3 Years Outdoor Weathering And Lts Having Passed These Tests Shall Be Obtained From Lnlernational/Government Laboraiory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cefiificate Ls Obtained From Lnternational Condition. It Should Also Be Oblalned From Lndian Condition Wilhin 3 Years Of Launching Of Producl By The Manufacture In Abroad. Alternatively, A Certificate Conforming To Astii Speciflcation (D 4S5b-09) On Adiflcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Prcvisionally. Ln Such A Siluation, The Employer/Client, If So Desires, Could Seek For A Performance Guaranlee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirernent Of Three Years Outdoor Weathering Of Lhe Sheeting As Per Irc 67:2012 & Prooi Of The Same Reporl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpoftalion, Installation And Incldentals All Complete As Per Direction Oi The Engineer-Ln-Charge , Retro-Reflectlveshoeting Type-Xl With 4 Mm Thick Acm Double Side Providing & Rlxing Of Reflective Signs With A Colrosion Resistanl 4 Mm Thick With 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Face Lo Be Iully Covered With High Lntensity Prismatic Sheeling Type Lv As Per Irc-67:2012 Relro Retlective Sheeting Wlth Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specification No_ Bo1.3.7 .The Sheeting Shall Have A Pressure - Sensilive Adhesive Of The Aggressive - Tack Type Requiring No Heat, Solvent Other Preparation For Adhesion Lo A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer, The Acn,4 (Aluminlum Composite Materlals) Shall Be Fixed On The Back Fiame Ms Angle With Riveting. Micro Prismalic Type Lv Retro Reflective Sheeting Conflrming To Astm D4956 09 Shall Be Pressure Fixed. The Relro Refleclive Sheeting Shall Be Tested For A Ce(Iilcate Of Having The Sheeting Tested For Coefllcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Funqus Resistance. 3 Years Outdoor Weathering And Its Having Passed These Tests Shal Be Oblained From Lnternationa /Governmenl Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case Lhe Certillcate Ls Obtained From Internalional Condition, It Should Also Be Obtained From Lndian Condition Within 3 Years Of Launching Of Product By The Manufacture In Abroad Alternalively, A Ce(Iilcate Conforming To Astm Specification (D 4956-09) On Artiflcial Accelerated Wealhering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Sltuation, The Employer/Cllent, If So Deslres Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cedillcate Meeling The Requirement Of Lhree Years Outdoor Weathering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo( Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpo.Tation, Installation And Incidentals All Complete As Per Direction Of The Engineer-In-Charge , Bollard (Single Sido) Supply & Fixing Of Bollard Made(Single Side) Out Of2mm Thick Aluminium Sheet Face Lo Be Covered With High Intensity Prismatic Grade Type Lv Sheeting , Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specillcation No-801.3.7 . Welded Poly Shaped To Make It Monolithic Pillar Size 12Oo Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Is Fully Cover (Size Of Foundation 0.45X0.45X0.60M) , Bollard (Doublo Side) Supply 8, Fixing Of Bollad Made (Double Side) Out Of 2Mm Thick Aluminium Sheet Face To Be Covered With High Intensity Prismatic Grade Iype Lv Sheeting Legends , Letters , Numerals And Borders Etc Should Be As Per Morih Specification No-801.3.7. Welded Poly Shaped To Make It Monolithic Pillar Size 1200 Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Ls Fully Cover. (Size Of Foundalion 0.45X0.45X0.60M) , Solar Power Road Marker (Solar Studs) The Solar Studs Shalt Be Made Of Aluminium Alloy And Poly Carbonate Material Which Shall Be Absolutely Weather Resistant And Strong Enough To Support A Load Of 13,635 Kg Tested In Accordance With Ast[4 D4280. Lts Co]Our May Be While . Red , Yellow , Green Or Blue Or Combination As Directed By The Engineer . Its Water Resislance Shall Meet Lhe Requiremenls Of Lp 65 In Accordance Wilh 15:12063:1987 Category 2 For Protection Againsl Water Ingress The Dimensions Of Solar Sluds Shall Not Be Less Than 100 Mm X 100 Mm X 10 Mm Ltshall Have Super Bright Leds So As To Provide Long Visibillty From A Distance Of More Than B0o M. Lts Flashing Rate Shall Not Be Less Than1 Hz Lts Should Be Able To Glve The Prescribed Performance In The Temperrature Range Of - 40C To +55C Lts Life Shall Be Not Less Than 3 Years. The Rate Shall Include All Materials, Labour, Equipments, Fabrication, Transportation, Erecuon, Installation And Incidentals All Complete As Per Direclion Of The Englneer-In-Charge , Cast-Ln-Situ Cement Concreto M 20 Kerb Construction Of Cement Concrete Kerb With Top And Bottom Width 115 And 165 Mm Respectively, 250 Mm High In M 20 Grade Plain Cement Concrete On M-10 Grade Foundation 150 Mm Thick, Foundation Having 50 Mm Projection Beyond Kerb Stone, Kerb Stone Laid With Kerb Laying Machine, Foundation Concrete Tad Manually, Alt Complete As Per Clause 408. , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 90 Cm Equllateral Tringle With Dif,Lnitation Plate Size (20Cm X 60Cm , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Eqlrilateral Trinqle With Difflnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Circular With Difflnltation Plale (20Cm X 60Cm) . , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government B0 Mm X 60 Mm Reclangu annual repair With Difllnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Mm X 45 Mm Rectangular With Difllnitation Plale (2Ocm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm X 60 Cm Square With Difflnitation Plate (20Cm X 60Crn) , Direction And Place Identification Signs Up To 0.90 Sqm Size Board Providing And Erecting Directlon And Place Identification Retro Reflectorised S Gn As Per Irc-67 Made Of High Intensily G.Ade Sheeting The Relro Reflective Sheelng Shall Be Tested For A Certiicate Of Having The Sheeling Tested For Coefficient Of Reko Reflection. Daytime Colour And Luminance, Shrinkage, Flexibllity. Liner Removal Adhesion, Impacl Resislance, Specula. Gloss And Iungus Resistance, 3 Years Ouldoor Weathering And Its Having Passed These Tesls Shall Be Obtalned From Lnternational/Govemment Laboraiory/ Lnslitule By The Manufacturer Of The Sheeting And In Case The Certillcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condltion Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certiflcate Confonning To Ast[4 Specification (D4956 09) On Art Ficial Ccelerated Wealhering Requirements Faom A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer I Client, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Lhree Years Olrtdoor Weathering Of Lhe Sheeting As Per Irc 67 2012. Legends , Letters , Nurrerals And Borders Etc Should Be As Per Imorth Speciilcation No-801.3.7 Sheet Fixed Over Aluminium Sheetinq .2 Mm Thick Wilh Area Not Exceeding 0.9 Sqm.Supported On A Mild Steel Single Angle Iron Post 75X75x6 Mm Flrmly Fixed Lo The Ground By Rneans Of Property Designed Foundalion With N,4-15 Grade Cement Concrete 45X45x60 Cm.,Below Ground Lcvcl As Pcr Approvcd D.Awing. Complete. , Tree Plats Supply & Fixing Of Retro Reflective Tree Plate Having Size 15Cm X15cm, Conjisiing Type Xl Retro Reflective Sheeting Lixed Over 1.50 Mm Thick Aluminiu; Sh;Et Including Labour, Material T&P Etc For Proper Completion Of The Work. The Rate Shall Include All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 1000 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 750 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 500 Mm Helght , Aluminum-Backed Flexible Prismatic Sheeting Shall Be Made Of Yellow Colored Flexible Prismallc Sheeting With Non-Rnetallic Prismatc Lens Formed In A Lransparent, Synthelic Resin As Retro Leflective Elements. This Llexible Prlsmatic Sheeting Shall Have Black And Yellow Stripes With Aluminum Backed Flexible Prismatic Type Vl Sheeting Conforming To Astm: D4956 . Specifications And Standards Of Coefllcient Of Relro Refleclivity, Flexibility And Lmpact Resislance Applicable For Reboundable Devices This Flexible Prismatic Sheeting Shall Have Screen Printed Arrow/Slant Line Pattern In Black Colour In A Continuous Roll Format. Wldlh Of Object Marker Shall Be 300 Mm. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer In-Charge , 2.40 M Span Over Head Cantilever Structure With 150 Die Ms One Vertical Post (Double Side Retro Reflective Sign Boards) Supply, Fixing & Eraction Of Built Up Cantilever Structure 240 M Span O.PiiIng Oi One Ve.Tical Posts Of 7 30 N4 Heighl Made Up Of 150 Mm Nb Medium Class T\4S Pipe As Vertical Memberwelded With 10 Mm Ms Plate At Top & Lo Mm Lvls Plate At Boltom. Flxing To Vertical Post As Per Structllre Design & Drawing Wiih One Of Steel Primer And Two Coats Of Synthetic Enamel Plant And The R;Tro Reflective Sheetinq Shall Be Tesled For A Certifcale Of Having The Sheeting Tested Fo. Coemcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Olltdoor Wealhering And Ils Having Passed These Lests Shall Be Obtained From Lnternational/Government Laboraiory/ Lnstitute By The Manufactllrer Of The Sheeting And In Case The Certificate Is Obtained From Internatlonal Condilion, It Should Also Be Obtained From Lndian Condition Wilhin 3 Years Of Launchlng Of Product By The Manufacture In Abroad. Alternatively, A Cedificate Confonning Io Astm Speciflcation (0 4956 09) On Artificial Accelerated Weathering Reqllirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. N Such A Sltuation, The Employer / Client, If So Desiaes. Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerllllcate Meeting The Requirement Of Three Years Outdoor Weathering Ol Lne Sheeling As Pel Irc 67 2012 . Legenos . ,Etters . Numerdls And Borders Elc Sholllo Be Asperl\,4Orlh Specif,Calion No_801 37 The Work Includes Construction Of Reinforced Cement Concrete Foundation Of Size 0.60X0.60X1.20 M Of Required Depth As Per Site Condilion For Built Up Struclure Lncluding Earth Work In Excavation 100 Mm Thick Lean Concrete Ln 1:3:6 Cemenl Coarse Sand And 40 Mm Gauge Stone Ballast. Reinforced Cement Concrete Lm25 Includlng Supply And Fixing Of 25 Mm Dla Foundalion Bolts 600 Mm Long As Per Provision Of Slructure Design Including Cost Ot Reinforcement & Shuttering. The Lateral Vertical Clearances And Complete. Lnstallation Work Shall Be As Per Relevant Clauses Of Mort&H Specitlcation Seclion 800 And Irc 67 2012 Complete In A I Respect The Rates Shall Inclucle Cosl Ol Design Fabrication, Supply, Lransporlalion, Local Shifling Erection Of Signage Slructure Using Crane, Incluslve Of All Taxes Etc All T&P Machine, Material And Labout Required For Proper Completion Of Work As Per Direction Of Engineer-In-Charge , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 30X90 Cm (Lefrright) Object Hazard , Retro Rellectorisod Signs (Stajnless Steel Frame And Post With One Side Sings) Supply & Fixing Of Reflective Sign Board (Single Side) Of Size 1.50X1.20 M Retro Refleclive Sheeling Of Hip Grade Type-Lv, Lhe Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick, Acm Sheel Of Standard Make As Per Morth Specificaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Cm Cement Conclete Foundauon. The Stainless Steeljoint Welding Of Ss Pipe Work Shall Be Band And Grinder Property Including Bufflng So An To Give Uniiorm Shining At Weded Joinls. The Retro Reflective Sheellng Shall Be Lested For A Certiflcate Of Having Ihe Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Cololrr And Luminance, Shrinkage, Flexibility, Linet Removal, Adheslon, Impact Resistance, Specular Qloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Governmenl Laboratory/ Institute By Lhe Manufacturer Of The Sheeting And Ln Case The Cedillcate Is Obtained From Inlernational Condition, It Should Also Be Oblained From Lndian Condition Within 3 Years Of Launching Of Procluct By The Manufacture In Abroad Allernatively. A Certiflcate Confolrnlng To Astm Specilicalion (D 4956-09) On Artiflcial Acceleraled Weathenng Requirements From A Reputed Laboratory Ln Lndia Can Be Accepled Provislonally. Ln Slrch A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificale Meeting The Requirement Of Three Years Ouldoor Weathering Of The Sheeting As Per Irc 67I2012. Legends , Letters , Numerals And Borders Elc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Governmenl Repod Shall Be Uploaded While Quoting Tender. , Retro Reflectorised Signs (Stainless Steel Frame And Post With Both Side Sings) Slrpply & Fixing Of Reflecllve Sign Board (Sing E Side) Of Size 1.50X1.20 M Retro Reflective Sheeting Of Hip Grade Type-Lv, The Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick Acni Sheet Of Standard Make As Per Morth Speciilcaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Crn Cement Concrele Foundation The Stainless Steelioint Welding Of Ss Pipe Work Shallbe Band And Grinder Propefiy Including Butting So An To Give Uniform Shining At Weded Joints. The Relro Reflective Sheeting Sha I Be Tested For A Certificale Of Having The Sheeling Tested For Coefficient Of Retro Reflection Daytime Colour And Luminance, Shrinkage. Flexibiity, Llner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Reslstance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeling And Ln Case The Certiflcate Is Obtained Lrom Lnternational Condition, It Should Also Be Obtained From Lndian Condition Wlthin 3 Years Of Launching Of Product By The Manufacture In Abroad. Allernatively, A Cerlificate Conforming To Astm Specificalion (0 4956.09) On Artificial Accelerated Weathering Requlremenls From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificate Meeting The Requirement Of Three Years Outdoor Weather Ng Of The Sheeting As Per Irc 67I2012. Legends. Letters, Numerals And Borders Etc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Government Report Shall Be Uploaded Whlle Quoting Lender. , Type - A, W : Metal Beam Crash Barrier Providing And Erecting A W Metal Beam Crash Barrler Comprlsing Of 3 Mm Lhick Coffugated Sheet Melal Beam Ral 70 Cm Above Road/Ground Level Flxed On Ismc Series Channel Vertical Posl, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High. 1.1 M Below Grolnd/Road Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fltlings To Conform To Lsi1367 And 15:1364. Metal Beam Rail To Be Fixed On The Vedical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810 , Type - B, Thrie : Metal Beam Crash Barrier Providing And Erecting A Thrie Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Melal Beam Rail,85 Cm Above Road/Ground Level, Fixed On Isi\Ic Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Cenlre To Cenke, 2 M High With 1.15 M Below Ground Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fittings To Conform Lo Lsl1367 And Ls:1364 Metal Beam Rail 10 Be Fixed On The Verlical Post With A Space Of Channel Seclion 150 X 75 X 5 Mm, 546 Mm Long Complete As Per Clause 810 , Anti-Termite Treatment The Soil Along With External Perimeter Of Building At The Rate Of 2.5 Litres Of Emulsion Per Square Metre Of The Perimeter Wall {Chapter No.08 Si.No.5} , Anti-Termite Treatment Of The Bottom And Sides Of Excavation At The Rate Of 5Litres Of Emulsion Per Square Metre Of Surface Area {Chapter No.08 Si.No.1} , Anti-Termite Treatment Of The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface{Chapter No.08 Si.No.3} , Anti-Termite Treatment Of The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface {Chapter No.08 Si.No.4} , Anti-Termite Treatment Of The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (Area Of The Sub Structure In Contact With Backfill To Be Measured) {Chapter No.08 Si.No.2} , Treatment Of Existing Masonry Using Chemical Emulsion @ One Litre Per Hole At 300 Mm Interval Including Drilling Holes At 45 Degree And Plugging Them With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To The Full Depth Of The Hole : With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration {Chapter No.08 Si.No.6-2.35.4.1} , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration {Chapter No.08 Si.No.6-2.35.3.1} , Providing And Stacking 22.40-53Mm Guage Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Etc All Complete.(Ns) , Supply And Laying Stone Dust Etc All Complete. , Consolidation/Compaction Of Stone Ballast 10Cm Thick (Loose) Coat Including Repairing Of Patches Picking Up To Old Surface Spreading, Ballast Making Medhies To Retain Water And Carriage Of Metal Upto 30M Carriage Of Water Upto 200M Maintenance Of Barriers And All Labour T&P Including Road Roller Charges Etc. Required For Proper Completion Of Work The Stone Ballast Is To Be Supplied To The Contractor Free Of Cost At Site. , Scarifying The Existing Bituminous Road Surface To A Depth Of 150 Mm And Disposal Of Scarified Material With A Lift Upto 3 M And Lead Upto 1000 M As Per Technical Specification Clause 301.4 {Chapter No.20 Si No.16} , Providing And Applying Primer Coat With Ss1 Grade Bitumen Emulsion On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg/Sqm Using Mechanical Means. (As Per Attached Analysis) , Providing And Laying Dense Graded Bituminous Macadam With Higher Capacity Batch Type Hmp Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 Per Cent By Weight Of Total Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 505 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , Providing & Applying Tack Coat With Bitumen Vg-10 Using Bitumen Pressure Distributor At The Rate Of 0.30Kg/Sqm. On The Prepared Primed Granular/Old Painted Surface. Cleaned With Air Compressor. Including All Taxes, Material, Labour, T&P Etc Required For Proper Completion Of The Work. (For Bituminous Surface). (Chapter No.20 Si No.9) , Providing And Laying Bituminous Concrete (Grading-Ii) With 100-120 Tph Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Vg-30 As Per Approved Job Mix Formula Which Ever Is Higher Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification 5Th Revision Clause No. 509 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , S/L/J Of 20Mm Dia Pvc Cunduct Pipe Etc. All Complete. , Making Of Nala Bandha With Sand Bags. With Local Sand Including Etc. All Complete. (Atached Per Annalysis Rate). , Providing Of Nala Bandha For Diversion Of Nala Etc All Complete.(Ns) , Scraping Of Max Phalt Road Including Disposal Of All Scraped Material To A Distance Of 30Mtrs (100 Ft) As Directed By Engineer-In-Charge C.P. & T&P.Etc. All Complete. {Chapter No.20 Si No. 772(A)} , Dismentling Existing Damage Plaster Including Disposal Of Refuse As Directed By E/Ic With In A Distance Of 60 Meters Etc. All Complete. {Chapter No. 17 S.I. No.16 (706)} , Supply And Fixing Of Light Fitting Switch Board. (None Sheduled) , Fixing Of Gate, Grill And Jali Etc. All Complete. (None Scheduled) , Supply & Fixing Of Wiring Sub Main. , Supply & Fixing Of Plug Point 15Mm. , Supply And Fixing Oxided Iron Fitting Etc. All Complete (None Scheduled) , Supply/Fixing Of 16 Mm Pvc Pipe Adopter Suitable For Item No. , Supply/Fixing Of 20 Mm Cvc Pipe Adopter Suitable For Item No. , Supply & Fixing Of 27Watt. Cfl Etc. All Complete. , Supply And Fixing Cat Eye Including Supply Of All Material, Loabour, T&P Etc. All Complete. (Chapter No.28 Si.No.5B) , Supply And Fixing Wiring Of Light Point. (None Sheduled) , Making Connection Of Drain Of Sewer Line With Existing Man Hole Including Breaking Into And Making Good The Walls, Floors With Cement Concrete 1:2:4 Cement Plastered On Both Side With Cement Mortar 1:3 Finished With A Floating Coat Of Neat Cement And Making Necessary Channels With Cement Concrete 1:2:4 For The Drain Etc. All Complete. (Chapter No.25 Si.No.9) , Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Course Sand : 4 Graded Stone Of Size 20 Mm Nominal Size) Laid In One Layer Finished With A Floating Coat Of Neat Cement (40 Mm Thick Floor). (Si No. 665), Nbo 14.71) , Providing And Fixing Of Foot Steps Etc All Complete. (Ns) On Market Rate , Providlng And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Ls:8931.15 Mm Nominal Bore , Supply & Fixing Of C.P. Brass Stop Cock (Conceled) Of Standerd Design Of Approve Quality Etc. All Complete. (Chapter No.21 Si.No.44) , Providing And Fixing Close Timbering In Trenches On Both Side & All Complete. (A) 0.00 To 3.00 M. (None Scheduled) , Providing And Fixing C.P. Brass Stop Cock (Concealed) Of Standard Design And Of Approved Make Conforming To Ls:8931..15 Mm Nominal Bore , Fixing Window Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Ls Standards And Weighing Not Less Than 690 Qms.15 Mm Nominal Bore , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 75Mm Diameter. (Chapter No.23 Si.No. 32(Ii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 110Mm Diameter. (Chapter No.23 Si.No. 32(Iii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 140Mm Diameter. (Chapter No.23 Si.No. 32(Iv)) , Rectangular Shape 1500X450 Mm Mirror With Plastic Moulded Frame. (Chapter No.22 Si.No.77) , Making Ornamental 2D Painting With Special Design Make By Specialist Painter Laying Of Two Coat Birla White Putty And Design By Asian Paint Including All Material Etc. All Complete. (Nn Approved) , Providing Of 8Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Fixing Door Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Supply And Fixing 6Mm (1/4) Thick Chine White Glazed Tiles In Flooring Or Dado Laid With 1:3 Cement And Approved Coarse Sand Mortar And Approved Coarse Sand Mortar Finished With White Cement Jointed And Polishing Complete Including Supply Of All Materials, Labor For Porper Completion Of The Work. (Chapter No.14 S.I. No. 628) , Supply & Fixing Of Pre-Cast M-30 Cement Concrete Grass Paver (Rubber Molded Coloured) Over 40Mm Thick Local Sand Bed, With 3Mm Thick Joints Filled With Local Sand Including Leveling, Tempering And Sweeping Etc., Interlocking Bricks Will Be As Description Given In Direction Issued By The Ircsc-03-2004 And Should Be Isi Marked All Complete. 80Mm Thick, Strength Should Not Less Than M-30. (Tiles I Shape Decided By Engineer-In-Charge With Isi Mark) {Chapter No.20 Si.No.17F) , Repairing Of Leakage And Damege Pipe Line Etc All Complete.(Ns) , Lettering & Painting Of Wall Etc. All Complete. , Red Sand Stone Work For Wall Lining Etc. (Veneer Work) 30Mm Thick In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Camping Jointing In White Cemnet Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching Complete. (Chapter No.18 Si.No.1 New) , Providing And Fixing White Vitreous China Wash Basin Size 630X450mm With Pair Of 15Mm C.P. Brass Pillar Taps Including Etc. All Complete. (Chapter No.24 S.I. No. 3(A)) , Cleaning Of The Site For Workable Etc. All Complete. (Non Scheduled) , Providing Of 32Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 1200X600x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 600X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x100mm Etc All Complete. (As Per Market Rate) , Fixing Of Reinforced Cement Concrete Slab Etc All Complete. (Ns) , Raising & Re-Fixing Of Manhole Including All Material Labor T&P Etc. All Complete. (Non Scheduled) , Supply & Fixing Reinforced Cement Concrete Menhole Cover Heavy Duty Size Etc. All Complete. (Non Scheduled) , Providing Laying Spreeding And Compacting 45-90Mm Stone Agreegate For W.M.M. Specification Etc. All Complete. (None Scheduled) , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing Of 3D Ornamental Wall Art Painting By Architect & Special Painter Including Scrapping Of Wall And Two Coat White Putting White Putty One Coat Primer All Labour Scaffolding Work & Labour T&P Etc. Painting By Asian Special Paint Etc. All Complete. (Rate Mr As Smart City, Agra) , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam (22.40-53Mm) Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With 3 Wheeled Steel/ Vibratory Roller In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening/ Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density. , Providing & Laying 5Cm. Thick B.M. Laying By Paver Finisher Bitumen Of The @3.4%Kg By Weight And Stone Grit Etc. All Complete. (20-Chapter Analysis Rate) , Providing & Laying 2.5Cm. Thick S.D.B.C. Laying By Paver Finisher Bitumen Of The 5% By Weight Etc. All Complete. (20-Chapter Analysis Rate) , Supply & Fixing M/S Iron Work Display Board Including Painting, Lettering Etc. All Complete. (None Schedule) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.4A) , Supply And Fixing Of Precast Reinforced Reinforced Cement Concrete Benches (Pfrc) Ornamental Benches With 02 Year Warranty Etc All Complete. (None Scheduled) , S/L/F Supply Of 1000Mm Dia Np-3 Reinforced Cement Concrete Hume Pipe In Proper Position As Directed By E/I Including Catage Of Pipes Collars Upto 30M Distance Etc All Complete. (Chapter No.1 Si.No.31(E) ) , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2Cm (3/4) Gauge Approved Stone Ballast In The Proportion 1:2:4 In Reinforced Cement Concrete Slab Excluding Supply Of Reinforcement And Its Bending But Including Its Fixing And Binding The Same With 24 Bwgi Binding Wire And Including Necessary Centring And Shuttering Etc. And Also Including Supply Of All Materials Labor And Tools And Plants Etc. Required For Proper Completion Of The Work. Strength Of The Concrete Shall Not Be Less Than M-150. (5-Chapter S.I. No.-284) , Supply & Fixing Granite Stone Work Display Board (Size 2.50Ft X 4.00Ft) Including Painting, Lettering Etc. All Complete. (None Schedule) , Installation Of 1.50 H.P. Isi Marked Sumbercible Pump Etc All Complete. (Attache As Per Santion Annalysis) , Cost Of Septik Tank Attache As Per Estimate & Details. , Plain Glass Best Quality, Cut To Size 5Mm Thick , Providing And Fixing Designer Dustbin (Market As Per Catlog Code No. Db-03). , Supply Of Planting Of Trees Amaltas, Jaarul, Arjun Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 110Mm Is:4984:2016 (As Per Market Rate) , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 160Mm Is:4984:2016 (As Per Market Rate) , Supply & Fixing Of Pre-Cast Reinforced Cement Concrete Drain Cover Different Size Etc All Complete. , Supply And Sowing Of Grass In Park Including One Year Mantinance Etc. All Complete. (None Scheduled) , Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 8 Km Lead Complete (Earth Measure Dinstacks Will Be Reduced By 20% For Payment) .(Dar 2020 Hort-Basic Rates 2.2) Based , Supply And Fixing Of Light, Fitting Switch Board. (None Sheduled) , Supply And Fixing Of Chest Press Double. , Supply And Fixing Of Leg Press Double. , Supply And Fixing Of Triple Twister. , Supply And Fixing Of Shoulder Builder Double. , Supply And Fixing Of Air Walker. , Supply And Fixing Of Doublebar. , Supply And Fixing Of Rower. , Supply And Fixing Of Horse Rider. , Supply And Fixing Of Plastic Side With Iron Ladder 12 Feet Length. , Supply And Fixing Of See Saw Double Board Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Sliding With Swing Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Slide Ground Level Mgr Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Snack Climber Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Slide Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Nursery Combo Set Revolving Jhoola Etc All Complete. (None Scheduled) , Providing And Fixing Of Stainless Steel Water Cooler 4 Tap Etc. All Complete. (None Schedule) , Supply And Fixing Bansi Paharpur (Red/White) Bharra Sand Stone Fully Moulded, Engraved, Carved With Polishing And Dressing Including Clamp And Fashners Of Pillar Set With All Complete Work Etc. (None Schedule) , Supply & Fixing Of Rubber Moulded Cement Concrete Kerb Stone (Double Tapper) M-20 With Labour T&P Etc All Complete. , Supply And Installation And Jointing Of 500Mmx500mm Epdm Rubber Mat Flooring Of Thickness 24Mm Puling All Labour Material T&P Etc. All Complete (Rate As Per Jhs Jscl Mr). , Providing And Laying Autoclaved Aerated Cement Blocks Masonry With 150Mm/230Mm/300Mm Thick Aac Blocks In Super Structure Above Plinth Level Up T Floor Five Level With Reinforced Cement Concrete Band At Sill Level And Lintel Level With Approved Block Laying Polymer Modified Adhesive Mortar All Complete As Per Direction Of Engineer-In-Charge (The Payment Of Reinforced Cement Concrete Band And Reinforcement Shall Be Made For Separately). , Providing And Fixing Of Barricading Of 100Mm Average Ballies With In A Distance Of 1.50 Meter For 3 Rows Of 3Q. 3 Nosof Cross Ballies, Two Supporting Ballies Of 3 Meter Ballies And 2 Nos Perpendicular Ballies Tie With Moonj Rope Including Supply Of All Material Such As Ballies Rope T&P Required For Proper Completion Of Work And Also Including Labour Component (Material Will Be Property Of Contractor After Dismantling). , Providing & Fixing Of Green/White Shade Multipurpose Net/Cotton Cloth Proper Completion Of Work Etc All Complete. (Ns) , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Supply And Fixing Of Ward Up Big As Per Attach Photograph & Analysis. , Supply And Fixing Of Ward Up Small As Per Attach Photograph & Analysis. , Supply And Fixing And Installation Of See Saw Double Board Jhoola Isi Marked As Per Direction Of Engineer-In-Charge Etc. All Complete As Per Attach Photograph & Analysis. , Supply And Fixing Of Cast Iron Banches As Per Attach Photograph And Analysis And Direction Of Engineer-Incharge Etc. All Complete. , Complete De-Silting And Cleaning Of All Types Of Sewer Lines By Using Super Suction Machine And Taking Out Of Cebris/Silt Etc Including Safe Disposal Of Silt As Directed By The Deptt. Including Cost Of All Consumble Likes Disel Oil, Water Ret Provision Of Diversion Of Line If Required With The Help Of Sewage Pumps, Poser Backup From Gene Sets For Running Of Pumps. Night Lighting Etc Barricades Display Of Entire Operation Along With Sadequate Safely Equipments Must Be Used By Sewer Workers Size Fo Sewer Line To Be Desilted As Detail Above 1000Mm Dia. , providing and laying Gsb With Graded Stone Ballast With Stone Grit Size Stone Ballast With Hand Ramming Watering Including All Material Labor T&P Etc.All Complete (Ns) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Providing & Laying Of Polythene Etc. All Complete. , Supply & Fixing Of Factory Wired Intergal Led Flood Light Luminaries With Die Cast Aluminum Housing Built With Driver Set Suitable For 140W. To 150W. Confirming To Ip 65 Protection Complete In All Respect. Cat Aaa ( S.I No. 1454 Pwd Schedule 2018) , Providing, Laying, Spreading And Compacting Stone Aggregates 45-63Mm Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Ro Ling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screen Ing/Bindin G Materials To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. (Labour , A Pre-Laminated Sheet, Often Referred To As A Prelam Sheet, Is An Engineered Myka Wood Work Product Where A Decorative Layer, Like Laminate Or Veneer, Is Pre-Attached To A Core Material Like Particleboard Or Mdf. These Sheets Offer A Durable And Aesthetically Pleasing Surface For Furniture, Interior Design, And Construction.(None Scheduled) , Same Is Ltme No-1 & Extra For Providing Lipping With 2Nd Class Teak Wood Battens 25 Mm Minimum Depth On All Edges Of Flush Door Shutters (Over All Area Of Door Shutter To Be Measured) , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration (Chapter No.8 Sr.No.6.1) , Supply And Fixing Of Advertisement Sign Board Size 4X3 As Per Direction Of Engineer-In-Charge Etc. All Complete , Supply Of Planting Of Trees Washington Palm, Amaltas, Cycus Revoluta, Ficus Benjamina Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Providing Of Rain Water Harvesting Drawing And Analysis Etc. All Complete (Details Attached). , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Drilling Of 200Mm Dia T/W Bore Suitable For 110Mm Dia Pipe All Complete With Labour T/P As Per Direction Of Engineer-In-Charge. , Suppply And Lowering Of 110Mm Dia 6 Kg/Cm2 Pvc Pipe (Phenolex Or Apb By E/I) All Complete. (Isi Marked Only) , Supply And Pouring Of Pea Gravel Suitable For T/W Bore All Complete. As Per Direction Of E/I (If Required) , S/L Of 1.50 H.P. Submersible Pump Set 65 Mt Head. (Pluga, Crompton, Ksb Etc.) I.S.I. Marked Etc All Complte. (Water Filled Only) , Supply & Fixing Of 100Mm Pvc Pipe Adopter Suitable For Item No.2 , S/L Of 1.50 H.P. Submersible Motor Controlled Starter Pannel All Complete. Crompton Make. (I.S.I. Marked Only) , Supply/Fixing Of 25Mm Gate Valve All Complete. Approved Make. , Supply/Fixing 4Sq.Mm 3 Core Copper Cable All Complete. , S/L Of 40Mm Dia Red Screen Ashirbad Pvc Pipe All Complete. , Supply/Fixing Of M.S. Clamp Made With 65X6mm X600mm Long M.S. Streep Suitable For 110Mm Dia Pvc Pipe For Holding All Complete. , Supply/Fixing Of 40Mm Dia G.I. Pipe B-Class Complete With Labour Charge. (Including All G.I. Fitting) , Supply & Fixing Of 25Mm Cpvc Etc. All Complete. , Development Of Bore Till The Discharge Is Free From Turbidity Of Compression Including Labour, Required For Proper Completion Of Work. , Supply And Fixing Of Precast Readymade Boundry Wall Hieght 8 Feet Etc All Complete. (As Market Rate) , Useable Brick (A) Class M-L50 , Useable Brick (B) Class M-100 , Useable Brick(C ) Straiqht Over Brunt , (D) Tiles, Bull Nose Drip Course Brick , Brick Ballast (A) Brick Ballast 40Mm Qauge , Brick Ballast (B) Class-150 Brick Ballast 25Mm Gauge , Brick Ballast (C ) Brick - Bats Of O.B.B./150 Bb , Fiy Ash Brick (Specification/Strength Should Not Be Less Than Bricks - M-{50) 230Mmx1 10Mmx75mm , Aac Block Autoclaved Aerated Concrete Block (Aac Block) Conforming To Ls : 2185 - 2005 (Part-3) Including Loading, Cartage Upto Site, Unloading, Stacking And Including All Levies And Royalties If Any But Excludinq G.S.T , Stone Ballast (Khera Thakur Quarry Bharatpur Rajsthan) 45-90 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 45-63 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 22.4-53 Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 20Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 19Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) Crushed Stone Dust 2.36Mm & Below , Stone Dust , 13.20Mm Guage , 11.20Mm Guage , 6.7Mm Guage And Below , Stone Boulder (From Khera Thakur Quarry) (A) 25-40 Kq , Stone Boulder (From Khera Thakur Quarry) (B) 40-60 Kq , Stone Boulder (From Khera Thakur Quarry) (C) Stone Bricks Dressed , Grit {District Gwalior(Mp) Quarry}(Berja,Chandrapura, Turak Pura,Parsen,Sumerpada Padampur Kheria, Bhileti & Bilara) District Bhind (M.P.)(Pali, Dirman & Piparsana) , (A) 45-63 Mm Guage Stone Ballast. , (B) 22.4-53 Mm Guage Stone Ballast. , (C) 20-40 Mm Guage Stone Ballast. , (D) 20 Mm Guage Stone Ballast. , (E) 19 Mm Guage Stone Ballast. , (F) 16 Mm Guage Stone Ballast. , (G) 13.20 Mm Guage Stone Ballast. , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured Rubber Moulded , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 (Plain) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 16 X6 (Designer) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 18 X6 , Coarse Sand (Excluding Actual Bulkaqe) , Fine Sand (Excludinq Actual Bulkaqe) , (L) Local Sand , Cement (L) Portland Cement (J.P., A.C.C., Birla, J.K.) O.P.C , Cement (Ll) Cement (P.P.C.) , Cement (Lll) White Cement (J.K. Or Birla Brand) , Green Net(Chapter- 1 Sl.No 44) , Tractor Trolley With Driver Including P.O.L. (Chapter-2 Sl.No 25)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 142
Uttar Pradesh View Result →
2.
Tourism #11175186 Price Bid
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation In Trenches For All Leads & Lifts In All Type Of Strata Comprising Of Any Type Of Materials Either In Full Or Part As The Case May Be Adopting Any Method/Methods As May Be Convenient As Permitted Excluding Blasting In All Conditions Such As Dry, Moist, Foul, Saturated, Submerged, Etc,. Including Dressing Of Sides, Planking & Strutting, Timbering ,Ramming Of Bottom ,Pumping And Bailing Out Water ,Barricading Danger Lighting Guarding, Getting Out Excavated Soil & Stacking As Directed By Engineer For All Leads & Lifts Etc. Complete , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Supplying And Filling In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. Moorum , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading, Transportation, Unloading, Levelling Etc At The Risk And Cost Of Agency / Contractor Including Selection Of Site For Disposal With All Lifts And Leads Etc. All Complete. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continious Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level. M-30 Grade Of Concrete , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Foundations, Footings, Bases For Columns , Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates. I.Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc.String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Providing And Laying In Position Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 40 M Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing : In Retaining Walls , Return Walls(Any Thk) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Providing And Fixing Exposed Laterite Stone Of 100 Mm Thk For Dado ,Laid On Cement Mortar Paste 1:4 (1 Cement : 4 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Stone Including Rubbing Including Applying Acrylic Varnish Etc Complete. As Per Designs And The Directions Of The Engineer-In-Charge. , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And And Laying Vitrified Floor Tiles In Different Sizes Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make In Colours And Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigment Etc., Complete. 600X 600 Mm Dark Shades , Providing And Laying Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Lakha Red , Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid . Plain White Makrana Slab 25Mm Thick , Marble Stone Flooring With 18 Mm Thick Marble Stone (Sample Of Marble Shall Be Approved By Engineer-In-Charge) Over 20Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement:4 Coarse ) Using : White Makrana Marble , Providing And Laying 300X350x160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 75 Mm Gap Between Two Stone For Grassing.Gaps To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.(Price Including Stone,Gardening Soil,Fertilizers And Grass Etc Complete). , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. Size 30 Cm Lx 40 Cm H X 15 Cm T , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Demolishing Reinforced Cement Concrete Work Including Stacking Of Steel Bars & Disposal Of Unserviceable Within 50 Steel Bars & Disposal Of Unserviceable Within 50 , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. 12 Mm Cement Plaster 1 :3 ( 1 Cement : 3 Sand) , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Providing & Fixing 19Mm Thk Plywood Work In Frames Of Doors Using 19Mm Marine Ply (Waterproof) With All Hardware,And Other Frames And Fixed In Position With 50 Mm Fastners Etc. Complete As Specified As Shown In The Drawings. , Providing And Fixing First Class Indian Teak Wood Moulded Beading To Door And Window Frames With Iron Screws, Plugs And Priming Coat On Unexposed Surfaces Etc. 50 X 12 Mm , Providing And Fixing Block Board Flush Door Shutters 35Mm Thick ( 1St Class Teak Ply On Both Faces), Laminated On Both Sides With 1Mm Thick Laminate Of Approved Brand And Colour Including Cost Of Adhesive, Nails, Screws During Fixing Etc. Complete. , Providing & Fixing Bright Finished Stainless Steel Mortise Latch & Lock With 60 Mm Cylinder And A Pair Of Levers, Handles With Necessary Screws Etc.Complete , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete. 250 X 16X 5Mm , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete Size 125 X 70 X 4.0Mm , Providing And Fixing 150 Mm. Bright Finished Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutter Thickness Complete. , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete , Providing And Applying Decorative Plastering For A Window Sorrounding, Using 1:4 Morter Mixture With Bricks Chips,Featuring A 300Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer. (The Job Involves Applying A Decorative Finish Over Underlying Structure, Incorporation Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Double Piller At The Corner (Ht 3.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Center (Ht 3.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Center For Hall(Ht 2.10 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 200Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Arch Of Span Of 3Mt., Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Flowers At The Ceiling With Dia. 1.20Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering Ofr Cornice At Ceiling In Hall Of Ht 0.40Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Construction And Installation 6Mt Height Replica Of Shree Suptakoteswar Stumb Using Sadhahalli Grey Granite Stone With Intricate Carvings, Moulding As Per Drawing. The Structure Should Have 6Mt Ht. With 2.5 X2.5X0.70 Mt Ht At Base And Stumb Of 1.50X1.50X5.25 Mt Height At Top As Per Details Drawings And Direction By The Engineer. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Paduka For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A 150Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Padma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Kumuda For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Adhopadma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Big Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2100Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Karnakuta ), Using 1:4 Morter Mixture With Bricks Chips, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1500Mm Height ,750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Cornice ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 750Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1200Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Adhopadma For Sajja), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Cornice Above Adhopadma ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Yalli ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Electrical Works , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 1/2 Core 70Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 1.5 Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 2.5 Sq.Mm , Supply Of 4 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core 2.5 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required.(A) In Soily Strata , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 70 Sq. Mm. , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator)(K) 12 Way (8+36), Double Door, Horizontal Type Cat B , Supplying And Fixing 40 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(E) Tpn, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C -- With Cat B Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required.B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required.(C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.A) 20 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.B) 25 Mm , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Requiredd) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Requireda) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required(A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Requiredb) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required(C) 6 Module (200Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Requiredsitc Of Wall Fan,600 Mm Sweep, With All Accessories. , Supply Installation Testing And Commissioning Of 8-10 W Spot Light Cob Ip65 Light With System Efficacy Of 100 Lm/W.L70 Life Of 50000 Hrs. P.F.0.95 With Thd10% ,Cct 5700 K,Cri 70,Surge Protection 4 Kv. Input Voltage Range Of 120V To 300V.Certification:- Lm79 & Lm80 Test Report Should Be From Govt Approved Inhouse Nabl Lab/ Government Of India Authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj As Required And Directed By Engineer Incharge , Supply Installation Testing And Commissioning Of W 80W Flood Light Ip65 Light With System Efficacy Of 100 Lm/W.L70 Life Of 50000 Hrs. P.F.0.95 With Thd10% ,Cct 5700 K,Cri 70,Surge Protection 4 Kv. Input Voltage Range Of 120V To 300V.Certification:- Lm79 & Lm80 Test Report Should Be From Govt Approved Inhouse Nabl Lab/ Government Of India Authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj As Required And Directed By Engineer Incharge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply Installation Testing and Commissioning of Decorative Chandelier Having Finest Crystals In Chrome Finish, Material -Mirror Stainless Steel, Dimensions (Mm) -Dia. =600X1500(H),Lamp Base- G9, Wattage- 7X42w Max, Complete With All Accessories. , Supply Installation Testing and Commissioning of Decorative Chandelier Having Finest Crystals In Chrome Finish, Material -Mirror Stainless Steel, Dimensions (Mm) -Dia. =1200X1500(H),Lamp Base- G9, Wattage- 12X42w Max, Complete With All Accessories. , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark,Of Approved Brands, Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. With Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineerincharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe. G)Watering Arrangement(Plumbing Will Be Paid Seperately). , Supply Installation Testing and Commissioning of 12W Multi Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 12W, Cct : Rgbw, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 400Mm. , Supply Installation Testing and Commissioning of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 80W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo Separate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 300Mm. , Supply Installation Testing and Commissioning of High Quality Multi Color Neon Flexible Light, Protection Rating : Ip65, Mounting Structure : Adjustable Wall Mount Ss Clips For Fixing The Lights. Power Consumption : 12W, Cct : Rgb/Rgbw, (As Per The Design Approval) Beam Angle : 120º, Control : Dmx512 Channel : 4 Ch, Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Time Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Epistar, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. , Supply Installation Testing and Commissioning of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 50W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 300Mm. , Supply Installation Testing and Commissioning of Aluminium Profile For Neon Flex , Supply Installation Testing and Commissioning of Dc Power Driver For The Above Lights, Power : 200W, Input : Ac 110-240V Ac, 50Hz, Output : Dc 12/24V, Protection Rating, Ip67, Surge Protection : Ll 4Kv, Le 6Kv , Supply Installation Testing and Commissioning of High Quality Dmx Decoder, Power Input : Dc 24V , Supply Installation Testing and Commissioning of Pvc Insulated Multi Core Electrical Un Armoured Flexible 5C X 0.5Sq Mm Power Cable Having Less Electrical Losses. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of 5 Core Dmx Cable Comprises Twisted Pairs With Shield Support For Carrying Of Data. Dmx512 Cable Is Used For Connecting All Light Consoles That Use Dmx 512 Standard Data Transmission. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete For Both Power And Dmx. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of Ip65 I Power Connectors Having 3/4 Pole Cable Connector, Chuck Type Strain Relief, Current Rating 20 A Rms Continuous, Easy And Extremely Precise Locking System Quick Lock High Impact Materials - Long-Lasting And Reliable , Supply Installation Testing and Commissioning of Ip65 I Dmx Connectors Having 3/5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of 5 Pin Xlr Male Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of 5 Pin Xlr Female Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of Power Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options. - 12 Nos Of 6/10A Sp Outgoing Mcbs. - 1No Of 32A Tpn Incoming Mcb. , Supply Installation Testing and Commissioning of Ip Driver Box Made Up Of Pvc / Upvc And Ivory Connectors For The Internal Terminations And External Outgoing Connecting Points, Fiber / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. , Supply Installation Testing and Commissioning of Dmx Isolator Or Splitter Provides Isolated Optical Dmx Splitter Provides 8 Outputs From A 1 Input And Input Voltage: Ac 110 To 220 V, 50 Hz, Product Features: Group 1 & Group 8 Dmx Signal Change. , Supply Installation Testing and Commissioning of Din Rail Mount Dmx Controller Can Be Used To Control A Wide Variety Of Different Dmx Systems- From Rgb/Rgbw To More Advanced Moving And Color Mixing Luminaires, Dmx Audio Players And Fountains. The Controller Comes With A Variety Of Features, Iphone/Ipad/Android Remote Control, Wi-Fi Facilities, Dry Contact Port Triggering And Flash Memory.Usb Connection • 1024 Dmx Channels Universe In Live Mode (Computer) • 8 Dry Contact Trigger Ports Via He10 Connector • Stand Alone Mode With 5 Area And 90+ Scenes, Mac Osx 10.6/10.7/10.8 - Windows Xp/Vista/Seven/8 32/64 Bits And Usb 2.0, Xlr3, Mini Usb, 1 He10, Power From 5V To 5.5V Dc (Ac/Dc Adapter In Option. , Supply Installation Testing and Commissioning of Programming Charges , Supply Installation Testing and Commissioning of Additional Accessories For Installing The Lights As Per The Final Drawing/Site Condition Consisting Of Clamps, Brackets, Angles, Conduits, Joints, Hardwares Like Fasteners, Nut & Bolts Etc., , Street Light Panel: Supply, Installation, Testing And Commissioning Of Lt Panel Ip- 67 Outdoor Type,Floor Mounted Panel, Shall Be Suitable For 415 V, 3 Phase, 4 Wire, 50Hz Supply System. With 3 Phase Energy Meter And 100A Tpn Mcb As Incommer And 11 Nos Of Tpn Mcb As Outgoing With 3 Numbers Of Microcontoller Based Programmable Digital Almac Timer As Directed By Engineer In-Charge
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Goa View Result →
3.
Defence #11162658 Technical Bid
Tender for Dismantling Plain Or Corrugated Steel Sheeting Of Any Thickness As In Roof Coverings Complete All As Specified And Directed. , Supply And Fix 0.63 Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugation Side Lap, Fixed With L-Type Or J-Type Or Cranked Hook Bolts In Lieu Of Screws And Washers, In Roofs, Walls Etc. With Grade Of Zinc Coating 275 Gsm Complete All As Specified And As Directed. , S & F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering Cladding To Wall, Fixed With Self Tapping Screws As Specified. , S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles And Rubbish Off The Premises Complete All As Specified And Directed. , Demolition Of Cement Concrete In Floors N.Exc 15 Cm Thick In Ground Floor (Below Or Above Ground Level) And In Any Position All As Specified , M&L For Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Stone Aggragate As In Subbase 25 Mm Thick Complete All Specified And Directed By Engr In Charge. , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Skirting All As Specified. , M&L For Light Shade Virified Ceramic Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , Material And Labour For 450X350x7mm Thick Glazed Ceramic Tiles Coloured Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Dado Of Bathroom, Toilet And Kitchen All As Specified. , Demolition Of Stone Slabs Or Tiles Of Any Description Or Thickness Laid Bedded And Pointed In Any Mortar In Floors, Aprons Etc , M&L 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Cooking Platforms In Cm 1:4 Including Pointing In White Cement 1:2 Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite All As Specified. , M&L For Screed Bed Or Bedding Layer Of Mortar 20Mm Thick In Cm 1:4 For Laying Floor Finishes Complete All As Specified And Directed. , Demolition Of Precast Cement Concrete Articles And Precast Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , M & L Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Using Plain Cement Concrete Type C-1, 1:3:6 (20Mm Graded Agg) And Setting In Cement Mortar 1:6 Complete All As Specified And Directed. , Demolition Of Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For. , M&L For Reinforced Cement Concrete Type B1 1:2:4 Using 20Mm Graded Aggragate In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Chajjas, Deck Slabs And In Shelves And The Like Complete All Specified And Directed , M&L Tmt Bars 10 Mm Dia., And Over Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia., Or Securing With Clips Qual Complete All Specified And Directed , M&L For Mils Steel Tmt Bars 05Mm Dia And Over, Upto And Including 10 Mm Dia In Stirrups, Spaces And Binders All As Specified And Directed.. , Use And Waste Of Flat Fair Finished Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work ; Not Exceeding 200Mm Thick (Horizontal Or Sloping) As Specified , Taking Down Cement Plaster On Brick, Concrete Block Wall Or Stone Walls, Etc., Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And Directed. , M & L 10 Mm Thick Rendering In Cement Mortar 1:6 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , M & L For 15 Mm Thick Plaster In Cement Mortar 1:4 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Primer. Complete All As Specified And Directed. , Material And Labour Preparing Newly Plastered Wall Surfaces And Applying Two Coats Of Cement Base Paint On Wall Surfaces Over One Coat Of Alkali Resistant Primer Complete All As Specified And Directed. , Dismantling Of Wall And Ceiling Board Or Insulation Boards/Slabs/Blanckets/Any Thickness Including Cover Fillets Complete All As Specified And Directed. , S&F 6 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Wall Surfaces Complete All As Specified And Directed. , S&F 4 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Ceiling Surfaces Complete All As Specified And Directed. , M & L For 50 Mm Thick Ii Nd Class Hard Wood Clean Sawn Boarding With Butt Joints Fixed With Nails In Any Situation Complete All As Specified And Directed. , M & L For 2 Nd Class Hard Wood Plain Fillets, Square, Rectangular Or Triangular In Section,Wrought, Secured With Nails Or Brads, Sectional Area Exc 3 But N.Exc 6 Sq.Cm. Complete All As Specified And Directed. , M&L For Preparation Of New Wooden Surfaces Of Any Description, Not Other Wise Described, Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. , Supply And Fix 600Mmx600mmx4mm Thick ‘E Board Classic (Make-Everest Industries Ltd) As In False Ceiling Including Supply And Fixing Gi ‘Tee Grid Frame Work Made Of Special Section Of M.S Galvanized Sheet 0.30Mm Thick , Bottom Portion Painted With Cellular Nitro Painting, Warping The Suspending Wire Around The Existing Wooden/Steel Purlin /Rafter For Suspending Grid Frame Work Of Size 605Mmx605mm Suspended With 4 Mm Dia Gi Wire @ 1200Mm C/C On Main Tee And Fixed To T-Grid With The Help Of Level Clip Or As Per Manufacturer Direction. The Section Consisting Of Main Tee 37Mmx24mmx0.60Mm, Cross Runner Tee 37Mmx24mmx0.60Mm And Perimeter Angle Of 24Mmx24mmx0.50Mm Thick. Perimeter Angle To Be Fixed To Wall With Gi Screw Of 40Mm Long @ 450 Mm C/C Along The Perimeter Of Wall Including Applying Two Coats Of Distemper Oil Emulsion Complete All As Specified And Directed , M & F For Solid Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specifications And Drawing Complete All As Specified And Directed. , S&F 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Exceeding 1.50 Sqm But Not Exc 4 Sqm. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exceeding 1.50 Sqm , S & F 2Nd Class Hard Wood Plain Solid Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid Rounded Or Chamfered, Put Together With Glue Pinned At Joints Complete All As Specified And Directed. , S&F 30Mm Flush Shutters, Solid Core Construction With Particle Board Core And Plywood Face Panels, Commercial Type On Both Side And Both Face Is Covered With Decorative Face Veneer With Lipping/Frame Tp Match All As Completed And Specified As Directed. , S & F 30Mm Thick 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebated And Prepared To Receive Glass, Gauze Etc But Divided Into Squares, Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed , S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20Mm Width Tuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Lain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed. , S&F Ms Window Guard Bars, Window Frames Etc Articles Confirming To Fe 410-0 Or Fe 310-0. , S & F 100Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S & F 75Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S& F Aluminium Anodised Barrel Tower Bolts 150Mm Long Of Extruded Section And Fixed , S& F Aluminium Anodised Barrel Tower Bolts 100Mm Long Of Extruded Section And Fixed , S & F 150Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F 100Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F Aluminium Alloy, Anodised, Sliding Door Bolts 300Mm Size With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed , S&F In Repair Pre Coated Mild Steel Floor Door Stopper ,Tongue Anodized 140Mm Length Including Vulcanised Rubber Piece Complete All As Specified And Directed. , S&F In Repair Pvc Coated 25Mm Dia Mild Steel Chromium Plated Curtain Rod Of Medium Weight And Including Fixing Brackets, Finals And Decorative End Supports Etc Complete All As Directed , M&L For Power Coated Anodised Aluminium Frame For Doors, Windows, Ventilatores With One Or More Rebated Including Joiing Cleat For Fixing Etc Complete All As Specified And Direcyed , S & F Anodised Aluminium Window And Ventilator Shutters, Fixed Type Without Sash Barsaluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glzing Clips,Rubber Packing,Anodised Aluminium Snap Beading,Screws Etc And Power Coating Of Any Colour(Thickness Of Powder Coating Not Less Than 50 Micron.) Complete All As Specified. , M & L For 4.80 Mm Sheet Glass, Ordinary Quality And Glazing With Aluminium Clip And Beading In Square Exc 0.5 Sq. M In Each Panel Complete All As Specified And Directed. , S & F Gi Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18Mm Etc All As Specified. , Hacking Out Old Broken Glass (Any Thickness, Size Quality Or Description) From Metal Frame Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones. , S&F Sheet Glass 3Mm Thick Ordinary Quality And Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , S&F 3Mm Thick Figured Glass, Pin Head Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , Dismatling Of Mild Steel Work Any Description , M&L For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Conforming To Fe 290 (Gde E-165) Complete All As Specified And Directed. , M & L For Preparation Of New Or Previously Untreated Steel Surface And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer To Steel And Iron Surfaces Of Any Description Over 10 Cm In Width Or Girth Not Otherwise Described Including Preparation Of New Steel Surfaces Complete All As Specified And Directed. , Dismantling Of Ci Soil, Rain Water Pipes, Cast And Vent Pipes Of Any Dia, Any Pattern Including All Fittings. , S&F Pvc (Swr) Pipes Single Socketed 110Mm Dia In Any Length With Rubber Ring Joints Fixed To Walls , S&F In Rep Pvc (Swr) Bends Any Radius, Bend 110Mm Dia With Access Door , S&F Pvc (Swr) Pipes 75 Mm Bore Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches,Wall Or In Floors. , S&F In Repair Pvc Bends Any Radius 75Mm Bore , S&F In Rep Pvc (Swr) Floor Trap, 75Mm Dia Outlet, Plain With Grating Incl Jointing With Solvent Cement. , S&F In Repair Grating Doom 125Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair Grating Doom 100Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair 32Mm Pvc Waste Pipe For Kitchen Sink ,Whb Complete All As Specified And Directed. , S&F In Repair Pvc (Swr) Wc Connector 110Mm Dia Complete All As Specified And Directed. , S&F In Repair Vitreous China Squatting Pan Orissa Pattern Size 580 X440 Mm White With Integral Foot Rest Complete All As Specified And Directed. , S7f In Repairs 10 Ltrs Capacity Pvc Valveless Syphonic Action Type Flushing Cistern Low Level White With Inlet Ball Valve, Float, Chain And Pull And Brackets Etc Complete All As Specified And Directed. , S & F In Repair Pvc Connection 15Mm Dia 450 Mm Long With Brass Check Nuts And Washers Complete All As Specified And Directed. , S&F In Repair Vitreous China Wash Down Water Closet Pan Of Pedestal Pattern, White With P Or S Traps, Including Connecting To Trap And To Flushing Pipe Etc Complete All As Specified. , S&F In Repair Vitreous China Wash Hand Basin White Flat Back Of Size 550Mmx400 Mm Including Cutting For And Pinning In End Of Brackets,32 Mm Waste Fittings,Brass Chromium Plated For Glazed Ware Sinks,Basins Etc.With Long Screwed Shanks And Fly Nuts Flange End Bedded In Red Lead Cement And Other End Fixed.And Flush Pipe Of Polytethylene Of Low Or High Density Or Pvc 32 Mm Dia Complete All As Specified And Directed. , S&F In Repair Sinks Made Of Stainless Steel With Drainage Board 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar On To Drarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe, Overall Size 495Mm X 420Mm Bowl Size 410Mm X 330Mm X160mm Complete All As Specified And Directed. , S&F Vitreous China Urinals, Bowl Type 465X355x265 Mm White, Providing & Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets, Flush Pipe, Grating And Union For Discharge Pipe Complete All As Specified And Directed. , S & F In Repair Plastic Water Closet Seat Cover, White Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And Directed. , S&F In Repair For Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified , S&F In Repairs Of Waste Fittings 32 Mm Dia, Brass, Cp For Glazed Ware Sink, Basins, Etc. With Long Screwed Shanks And Fly-Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed Complete All As Specified And Directed. , S&F In Repair Cp Towel Ring Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 90 Gms) , S&F In Repair Soap Dish, Any Type, Fiexd To Plugs With Chromium Plated Brass Screws , S&F Cp Towel Rail 600Mm Long Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 190 Gms) , S & F In Repair Looking Mirror 600 Mm X 450 Mm Bevelled Edge Mirror Or Selected Quality Glass, Mounted On 6 Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Specified And Directed. , Dismantling Of Water Tanks Exc 250 Ltrs & N. Exc 500 Ltrs Capacity And Removing To Store. , Dismantling Of Water Tanks Exc 500 Ltrs & N. Exc1000 Ltrs Capacity And Removing To Store. , S&F Pvc Water Storage Tanks Of 500 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S&F Pvc Water Storage Tanks Of 1000 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S & F In Repairs Fancy Type 15Mm Dia Bib Tap, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specifed. , S & F In Repair 20Mm Ball Brass Valves, High Pressure, With Polyethene Float And Flynut Complete Screwed For Iron Pipe Of 20Mm Dia All As Specified. , S&F In Repair 20Mm Gun Metal Globe Or Gate Valve With Iron Wheel Head, Screwed Both Ends For 20 Mm Dia Of Pipe And Fixed Complete All As Specified And Directed. , S & F In Repair Chromium Plated 15Mm Dia Stop Cock Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specified , Supply And Fix In Rep 15Mm Pillar Taps , Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed Complete All As Specified And Directed. , S&F In Repair 15Mm Brass Cp Mixer For Mixing Hot And Cold Water (Wall Mixer) Screwed Down For Iron Pipe Andd Fixed In Repairs For Bath Shower And Kichen Sink With Complete All As Specified And Directed. , S&F In Repair 15 Mm Brass Cp Basin Mixer Unit With All Fittings Required Complete All As Specified And Directed. , S& F In Repair Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And Directed. , S& F In Repair Chromium Plated Shower Roses With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Water Tubing And Connections Including Clfor Refixing Or Removal To Store , S&F 15Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches Complete All As Specified And Directed. , Taking Up Or Down 20 Mm Bore Steel Water Tubing And Connections Including Cleaning Or Refixing Or Removal To Store , S&F 20 Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 20 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 16 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , M & L For 100 Mm Thick Cement Concrete Type D- 2,1:4:8 (40Mm Graded Aggregate) As In Sub Base Complete All As Specified And Directed. , M & L Providing And Laying 60Mm Thick Factorymade Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour,Design & Pattern As In Footparth, Parks,Lawns, Drive Ways Or Light Traffic Parking Etc.,Of Required Strength, Thickness & Size/Shape, Made By Table Vibratory Method Usingpu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compactedbed Of Fine Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paverblocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Sizeand Pattern, Finishing And Sweeping Extra Sand Complete All As Specified . , M&L Chequered Cement Concrete Tiles 20Cmx20cmx25mm Thick With Grey Cement And Pigment, Set Jointed And Pointed In Neat Cement Slurry In Floors Completed All As Specified And Directed By Engr-In-Charge. , Disconnecting Existing Water Tanks Of Capacity Exc 250 Ltrs But N Exc 500 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed. , Disconnecting Existing Water Tanks Of Capacity Exc 500 Ltrs But N Exc 1000 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
Arunachal Pradesh View Result →
4.
Defence #11162657 Technical Bid
Tender for Dismantling Plain Or Corrugated Steel Sheeting Of Any Thickness As In Roof Coverings Complete All As Specified And Directed. , Supply And Fix 0.63 Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugation Side Lap, Fixed With L-Type Or J-Type Or Cranked Hook Bolts In Lieu Of Screws And Washers, In Roofs, Walls Etc. With Grade Of Zinc Coating 275 Gsm Complete All As Specified And As Directed. , S & F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering Cladding To Wall, Fixed With Self Tapping Screws As Specified. , S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles And Rubbish Off The Premises Complete All As Specified And Directed. , Demolition Of Cement Concrete In Floors N.Exc 15 Cm Thick In Ground Floor (Below Or Above Ground Level) And In Any Position All As Specified , M&L For Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Stone Aggragate As In Subbase 25 Mm Thick Complete All Specified And Directed By Engr In Charge. , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Skirting All As Specified. , M&L For Light Shade Virified Ceramic Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , Material And Labour For 450X350x7mm Thick Glazed Ceramic Tiles Coloured Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Dado Of Bathroom, Toilet And Kitchen All As Specified. , Demolition Of Stone Slabs Or Tiles Of Any Description Or Thickness Laid Bedded And Pointed In Any Mortar In Floors, Aprons Etc , M&L 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Cooking Platforms In Cm 1:4 Including Pointing In White Cement 1:2 Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite All As Specified. , M&L For Screed Bed Or Bedding Layer Of Mortar 20Mm Thick In Cm 1:4 For Laying Floor Finishes Complete All As Specified And Directed. , Demolition Of Precast Cement Concrete Articles And Precast Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , M & L Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Using Plain Cement Concrete Type C-1, 1:3:6 (20Mm Graded Agg) And Setting In Cement Mortar 1:6 Complete All As Specified And Directed. , Demolition Of Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For. , M&L For Reinforced Cement Concrete Type B1 1:2:4 Using 20Mm Graded Aggragate In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Chajjas, Deck Slabs And In Shelves And The Like Complete All Specified And Directed , M&L Tmt Bars 10 Mm Dia., And Over Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia., Or Securing With Clips Qual Complete All Specified And Directed , M&L For Mils Steel Tmt Bars 05Mm Dia And Over, Upto And Including 10 Mm Dia In Stirrups, Spaces And Binders All As Specified And Directed.. , Use And Waste Of Flat Fair Finished Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work ; Not Exceeding 200Mm Thick (Horizontal Or Sloping) As Specified , Taking Down Cement Plaster On Brick, Concrete Block Wall Or Stone Walls, Etc., Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And Directed. , M & L 10 Mm Thick Rendering In Cement Mortar 1:6 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , M & L For 15 Mm Thick Plaster In Cement Mortar 1:4 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Primer. Complete All As Specified And Directed. , Material And Labour Preparing Newly Plastered Wall Surfaces And Applying Two Coats Of Cement Base Paint On Wall Surfaces Over One Coat Of Alkali Resistant Primer Complete All As Specified And Directed. , Dismantling Of Wall And Ceiling Board Or Insulation Boards/Slabs/Blanckets/Any Thickness Including Cover Fillets Complete All As Specified And Directed. , S&F 6 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Wall Surfaces Complete All As Specified And Directed. , S&F 4 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Ceiling Surfaces Complete All As Specified And Directed. , M & L For 50 Mm Thick Ii Nd Class Hard Wood Clean Sawn Boarding With Butt Joints Fixed With Nails In Any Situation Complete All As Specified And Directed. , M & L For 2 Nd Class Hard Wood Plain Fillets, Square, Rectangular Or Triangular In Section,Wrought, Secured With Nails Or Brads, Sectional Area Exc 3 But N.Exc 6 Sq.Cm. Complete All As Specified And Directed. , M&L For Preparation Of New Wooden Surfaces Of Any Description, Not Other Wise Described, Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. , Supply And Fix 600Mmx600mmx4mm Thick ‘E Board Classic (Make-Everest Industries Ltd) As In False Ceiling Including Supply And Fixing Gi ‘Tee Grid Frame Work Made Of Special Section Of M.S Galvanized Sheet 0.30Mm Thick , Bottom Portion Painted With Cellular Nitro Painting, Warping The Suspending Wire Around The Existing Wooden/Steel Purlin /Rafter For Suspending Grid Frame Work Of Size 605Mmx605mm Suspended With 4 Mm Dia Gi Wire @ 1200Mm C/C On Main Tee And Fixed To T-Grid With The Help Of Level Clip Or As Per Manufacturer Direction. The Section Consisting Of Main Tee 37Mmx24mmx0.60Mm, Cross Runner Tee 37Mmx24mmx0.60Mm And Perimeter Angle Of 24Mmx24mmx0.50Mm Thick. Perimeter Angle To Be Fixed To Wall With Gi Screw Of 40Mm Long @ 450 Mm C/C Along The Perimeter Of Wall Including Applying Two Coats Of Distemper Oil Emulsion Complete All As Specified And Directed , M & F For Solid Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specifications And Drawing Complete All As Specified And Directed. , S&F 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Exceeding 1.50 Sqm But Not Exc 4 Sqm. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exceeding 1.50 Sqm , S & F 2Nd Class Hard Wood Plain Solid Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid Rounded Or Chamfered, Put Together With Glue Pinned At Joints Complete All As Specified And Directed. , S&F 30Mm Flush Shutters, Solid Core Construction With Particle Board Core And Plywood Face Panels, Commercial Type On Both Side And Both Face Is Covered With Decorative Face Veneer With Lipping/Frame Tp Match All As Completed And Specified As Directed. , S & F 30Mm Thick 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebated And Prepared To Receive Glass, Gauze Etc But Divided Into Squares, Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed , S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20Mm Width Tuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Lain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed. , S&F Ms Window Guard Bars, Window Frames Etc Articles Confirming To Fe 410-0 Or Fe 310-0. , S & F 100Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S & F 75Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S& F Aluminium Anodised Barrel Tower Bolts 150Mm Long Of Extruded Section And Fixed , S& F Aluminium Anodised Barrel Tower Bolts 100Mm Long Of Extruded Section And Fixed , S & F 150Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F 100Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F Aluminium Alloy, Anodised, Sliding Door Bolts 300Mm Size With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed , S&F In Repair Pre Coated Mild Steel Floor Door Stopper ,Tongue Anodized 140Mm Length Including Vulcanised Rubber Piece Complete All As Specified And Directed. , S&F In Repair Pvc Coated 25Mm Dia Mild Steel Chromium Plated Curtain Rod Of Medium Weight And Including Fixing Brackets, Finals And Decorative End Supports Etc Complete All As Directed , M&L For Power Coated Anodised Aluminium Frame For Doors, Windows, Ventilatores With One Or More Rebated Including Joiing Cleat For Fixing Etc Complete All As Specified And Direcyed , S & F Anodised Aluminium Window And Ventilator Shutters, Fixed Type Without Sash Barsaluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glzing Clips,Rubber Packing,Anodised Aluminium Snap Beading,Screws Etc And Power Coating Of Any Colour(Thickness Of Powder Coating Not Less Than 50 Micron.) Complete All As Specified. , M & L For 4.80 Mm Sheet Glass, Ordinary Quality And Glazing With Aluminium Clip And Beading In Square Exc 0.5 Sq. M In Each Panel Complete All As Specified And Directed. , S & F Gi Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18Mm Etc All As Specified. , Hacking Out Old Broken Glass (Any Thickness, Size Quality Or Description) From Metal Frame Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones. , S&F Sheet Glass 3Mm Thick Ordinary Quality And Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , S&F 3Mm Thick Figured Glass, Pin Head Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , Dismatling Of Mild Steel Work Any Description , M&L For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Conforming To Fe 290 (Gde E-165) Complete All As Specified And Directed. , M & L For Preparation Of New Or Previously Untreated Steel Surface And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer To Steel And Iron Surfaces Of Any Description Over 10 Cm In Width Or Girth Not Otherwise Described Including Preparation Of New Steel Surfaces Complete All As Specified And Directed. , Dismantling Of Ci Soil, Rain Water Pipes, Cast And Vent Pipes Of Any Dia, Any Pattern Including All Fittings. , S&F Pvc (Swr) Pipes Single Socketed 110Mm Dia In Any Length With Rubber Ring Joints Fixed To Walls , S&F In Rep Pvc (Swr) Bends Any Radius, Bend 110Mm Dia With Access Door , S&F Pvc (Swr) Pipes 75 Mm Bore Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches,Wall Or In Floors. , S&F In Repair Pvc Bends Any Radius 75Mm Bore , S&F In Rep Pvc (Swr) Floor Trap, 75Mm Dia Outlet, Plain With Grating Incl Jointing With Solvent Cement. , S&F In Repair Grating Doom 125Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair Grating Doom 100Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair 32Mm Pvc Waste Pipe For Kitchen Sink ,Whb Complete All As Specified And Directed. , S&F In Repair Pvc (Swr) Wc Connector 110Mm Dia Complete All As Specified And Directed. , S&F In Repair Vitreous China Squatting Pan Orissa Pattern Size 580 X440 Mm White With Integral Foot Rest Complete All As Specified And Directed. , S7f In Repairs 10 Ltrs Capacity Pvc Valveless Syphonic Action Type Flushing Cistern Low Level White With Inlet Ball Valve, Float, Chain And Pull And Brackets Etc Complete All As Specified And Directed. , S & F In Repair Pvc Connection 15Mm Dia 450 Mm Long With Brass Check Nuts And Washers Complete All As Specified And Directed. , S&F In Repair Vitreous China Wash Down Water Closet Pan Of Pedestal Pattern, White With P Or S Traps, Including Connecting To Trap And To Flushing Pipe Etc Complete All As Specified. , S&F In Repair Vitreous China Wash Hand Basin White Flat Back Of Size 550Mmx400 Mm Including Cutting For And Pinning In End Of Brackets,32 Mm Waste Fittings,Brass Chromium Plated For Glazed Ware Sinks,Basins Etc.With Long Screwed Shanks And Fly Nuts Flange End Bedded In Red Lead Cement And Other End Fixed.And Flush Pipe Of Polytethylene Of Low Or High Density Or Pvc 32 Mm Dia Complete All As Specified And Directed. , S&F In Repair Sinks Made Of Stainless Steel With Drainage Board 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar On To Drarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe, Overall Size 495Mm X 420Mm Bowl Size 410Mm X 330Mm X160mm Complete All As Specified And Directed. , S&F Vitreous China Urinals, Bowl Type 465X355x265 Mm White, Providing & Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets, Flush Pipe, Grating And Union For Discharge Pipe Complete All As Specified And Directed. , S & F In Repair Plastic Water Closet Seat Cover, White Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And Directed. , S&F In Repair For Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified , S&F In Repairs Of Waste Fittings 32 Mm Dia, Brass, Cp For Glazed Ware Sink, Basins, Etc. With Long Screwed Shanks And Fly-Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed Complete All As Specified And Directed. , S&F In Repair Cp Towel Ring Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 90 Gms) , S&F In Repair Soap Dish, Any Type, Fiexd To Plugs With Chromium Plated Brass Screws , S&F Cp Towel Rail 600Mm Long Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 190 Gms) , S & F In Repair Looking Mirror 600 Mm X 450 Mm Bevelled Edge Mirror Or Selected Quality Glass, Mounted On 6 Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Specified And Directed. , Dismantling Of Water Tanks Exc 250 Ltrs & N. Exc 500 Ltrs Capacity And Removing To Store. , Dismantling Of Water Tanks Exc 500 Ltrs & N. Exc1000 Ltrs Capacity And Removing To Store. , S&F Pvc Water Storage Tanks Of 500 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S&F Pvc Water Storage Tanks Of 1000 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S & F In Repairs Fancy Type 15Mm Dia Bib Tap, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specifed. , S & F In Repair 20Mm Ball Brass Valves, High Pressure, With Polyethene Float And Flynut Complete Screwed For Iron Pipe Of 20Mm Dia All As Specified. , S&F In Repair 20Mm Gun Metal Globe Or Gate Valve With Iron Wheel Head, Screwed Both Ends For 20 Mm Dia Of Pipe And Fixed Complete All As Specified And Directed. , S & F In Repair Chromium Plated 15Mm Dia Stop Cock Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specified , Supply And Fix In Rep 15Mm Pillar Taps , Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed Complete All As Specified And Directed. , S&F In Repair 15Mm Brass Cp Mixer For Mixing Hot And Cold Water (Wall Mixer) Screwed Down For Iron Pipe Andd Fixed In Repairs For Bath Shower And Kichen Sink With Complete All As Specified And Directed. , S&F In Repair 15 Mm Brass Cp Basin Mixer Unit With All Fittings Required Complete All As Specified And Directed. , S& F In Repair Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And Directed. , S& F In Repair Chromium Plated Shower Roses With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Water Tubing And Connections Including Clfor Refixing Or Removal To Store , S&F 15Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches Complete All As Specified And Directed. , Taking Up Or Down 20 Mm Bore Steel Water Tubing And Connections Including Cleaning Or Refixing Or Removal To Store , S&F 20 Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 20 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 16 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , M & L For 100 Mm Thick Cement Concrete Type D- 2,1:4:8 (40Mm Graded Aggregate) As In Sub Base Complete All As Specified And Directed. , M & L Providing And Laying 60Mm Thick Factorymade Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour,Design & Pattern As In Footparth, Parks,Lawns, Drive Ways Or Light Traffic Parking Etc.,Of Required Strength, Thickness & Size/Shape, Made By Table Vibratory Method Usingpu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compactedbed Of Fine Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paverblocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Sizeand Pattern, Finishing And Sweeping Extra Sand Complete All As Specified . , M&L Chequered Cement Concrete Tiles 20Cmx20cmx25mm Thick With Grey Cement And Pigment, Set Jointed And Pointed In Neat Cement Slurry In Floors Completed All As Specified And Directed By Engr-In-Charge. , Disconnecting Existing Water Tanks Of Capacity Exc 250 Ltrs But N Exc 500 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed. , Disconnecting Existing Water Tanks Of Capacity Exc 500 Ltrs But N Exc 1000 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
Arunachal Pradesh View Result →
5.
Defence #11162656 AOC
Tender for Dismantling Plain Or Corrugated Steel Sheeting Of Any Thickness As In Roof Coverings Complete All As Specified And Directed. , Supply And Fix 0.63 Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugation Side Lap, Fixed With L-Type Or J-Type Or Cranked Hook Bolts In Lieu Of Screws And Washers, In Roofs, Walls Etc. With Grade Of Zinc Coating 275 Gsm Complete All As Specified And As Directed. , S & F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering Cladding To Wall, Fixed With Self Tapping Screws As Specified. , S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles And Rubbish Off The Premises Complete All As Specified And Directed. , Demolition Of Cement Concrete In Floors N.Exc 15 Cm Thick In Ground Floor (Below Or Above Ground Level) And In Any Position All As Specified , M&L For Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Stone Aggragate As In Subbase 25 Mm Thick Complete All Specified And Directed By Engr In Charge. , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Skirting All As Specified. , M&L For Light Shade Virified Ceramic Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , Material And Labour For 450X350x7mm Thick Glazed Ceramic Tiles Coloured Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Dado Of Bathroom, Toilet And Kitchen All As Specified. , Demolition Of Stone Slabs Or Tiles Of Any Description Or Thickness Laid Bedded And Pointed In Any Mortar In Floors, Aprons Etc , M&L 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Cooking Platforms In Cm 1:4 Including Pointing In White Cement 1:2 Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite All As Specified. , M&L For Screed Bed Or Bedding Layer Of Mortar 20Mm Thick In Cm 1:4 For Laying Floor Finishes Complete All As Specified And Directed. , Demolition Of Precast Cement Concrete Articles And Precast Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , M & L Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Using Plain Cement Concrete Type C-1, 1:3:6 (20Mm Graded Agg) And Setting In Cement Mortar 1:6 Complete All As Specified And Directed. , Demolition Of Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For. , M&L For Reinforced Cement Concrete Type B1 1:2:4 Using 20Mm Graded Aggragate In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Chajjas, Deck Slabs And In Shelves And The Like Complete All Specified And Directed , M&L Tmt Bars 10 Mm Dia., And Over Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia., Or Securing With Clips Qual Complete All Specified And Directed , M&L For Mils Steel Tmt Bars 05Mm Dia And Over, Upto And Including 10 Mm Dia In Stirrups, Spaces And Binders All As Specified And Directed.. , Use And Waste Of Flat Fair Finished Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work ; Not Exceeding 200Mm Thick (Horizontal Or Sloping) As Specified , Taking Down Cement Plaster On Brick, Concrete Block Wall Or Stone Walls, Etc., Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And Directed. , M & L 10 Mm Thick Rendering In Cement Mortar 1:6 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , M & L For 15 Mm Thick Plaster In Cement Mortar 1:4 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Primer. Complete All As Specified And Directed. , Material And Labour Preparing Newly Plastered Wall Surfaces And Applying Two Coats Of Cement Base Paint On Wall Surfaces Over One Coat Of Alkali Resistant Primer Complete All As Specified And Directed. , Dismantling Of Wall And Ceiling Board Or Insulation Boards/Slabs/Blanckets/Any Thickness Including Cover Fillets Complete All As Specified And Directed. , S&F 6 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Wall Surfaces Complete All As Specified And Directed. , S&F 4 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Ceiling Surfaces Complete All As Specified And Directed. , M & L For 50 Mm Thick Ii Nd Class Hard Wood Clean Sawn Boarding With Butt Joints Fixed With Nails In Any Situation Complete All As Specified And Directed. , M & L For 2 Nd Class Hard Wood Plain Fillets, Square, Rectangular Or Triangular In Section,Wrought, Secured With Nails Or Brads, Sectional Area Exc 3 But N.Exc 6 Sq.Cm. Complete All As Specified And Directed. , M&L For Preparation Of New Wooden Surfaces Of Any Description, Not Other Wise Described, Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. , Supply And Fix 600Mmx600mmx4mm Thick ‘E Board Classic (Make-Everest Industries Ltd) As In False Ceiling Including Supply And Fixing Gi ‘Tee Grid Frame Work Made Of Special Section Of M.S Galvanized Sheet 0.30Mm Thick , Bottom Portion Painted With Cellular Nitro Painting, Warping The Suspending Wire Around The Existing Wooden/Steel Purlin /Rafter For Suspending Grid Frame Work Of Size 605Mmx605mm Suspended With 4 Mm Dia Gi Wire @ 1200Mm C/C On Main Tee And Fixed To T-Grid With The Help Of Level Clip Or As Per Manufacturer Direction. The Section Consisting Of Main Tee 37Mmx24mmx0.60Mm, Cross Runner Tee 37Mmx24mmx0.60Mm And Perimeter Angle Of 24Mmx24mmx0.50Mm Thick. Perimeter Angle To Be Fixed To Wall With Gi Screw Of 40Mm Long @ 450 Mm C/C Along The Perimeter Of Wall Including Applying Two Coats Of Distemper Oil Emulsion Complete All As Specified And Directed , M & F For Solid Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specifications And Drawing Complete All As Specified And Directed. , S&F 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Exceeding 1.50 Sqm But Not Exc 4 Sqm. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exceeding 1.50 Sqm , S & F 2Nd Class Hard Wood Plain Solid Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid Rounded Or Chamfered, Put Together With Glue Pinned At Joints Complete All As Specified And Directed. , S&F 30Mm Flush Shutters, Solid Core Construction With Particle Board Core And Plywood Face Panels, Commercial Type On Both Side And Both Face Is Covered With Decorative Face Veneer With Lipping/Frame Tp Match All As Completed And Specified As Directed. , S & F 30Mm Thick 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebated And Prepared To Receive Glass, Gauze Etc But Divided Into Squares, Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed , S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20Mm Width Tuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Lain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed. , S&F Ms Window Guard Bars, Window Frames Etc Articles Confirming To Fe 410-0 Or Fe 310-0. , S & F 100Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S & F 75Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S& F Aluminium Anodised Barrel Tower Bolts 150Mm Long Of Extruded Section And Fixed , S& F Aluminium Anodised Barrel Tower Bolts 100Mm Long Of Extruded Section And Fixed , S & F 150Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F 100Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F Aluminium Alloy, Anodised, Sliding Door Bolts 300Mm Size With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed , S&F In Repair Pre Coated Mild Steel Floor Door Stopper ,Tongue Anodized 140Mm Length Including Vulcanised Rubber Piece Complete All As Specified And Directed. , S&F In Repair Pvc Coated 25Mm Dia Mild Steel Chromium Plated Curtain Rod Of Medium Weight And Including Fixing Brackets, Finals And Decorative End Supports Etc Complete All As Directed , M&L For Power Coated Anodised Aluminium Frame For Doors, Windows, Ventilatores With One Or More Rebated Including Joiing Cleat For Fixing Etc Complete All As Specified And Direcyed , S & F Anodised Aluminium Window And Ventilator Shutters, Fixed Type Without Sash Barsaluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glzing Clips,Rubber Packing,Anodised Aluminium Snap Beading,Screws Etc And Power Coating Of Any Colour(Thickness Of Powder Coating Not Less Than 50 Micron.) Complete All As Specified. , M & L For 4.80 Mm Sheet Glass, Ordinary Quality And Glazing With Aluminium Clip And Beading In Square Exc 0.5 Sq. M In Each Panel Complete All As Specified And Directed. , S & F Gi Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18Mm Etc All As Specified. , Hacking Out Old Broken Glass (Any Thickness, Size Quality Or Description) From Metal Frame Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones. , S&F Sheet Glass 3Mm Thick Ordinary Quality And Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , S&F 3Mm Thick Figured Glass, Pin Head Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , Dismatling Of Mild Steel Work Any Description , M&L For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Conforming To Fe 290 (Gde E-165) Complete All As Specified And Directed. , M & L For Preparation Of New Or Previously Untreated Steel Surface And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer To Steel And Iron Surfaces Of Any Description Over 10 Cm In Width Or Girth Not Otherwise Described Including Preparation Of New Steel Surfaces Complete All As Specified And Directed. , Dismantling Of Ci Soil, Rain Water Pipes, Cast And Vent Pipes Of Any Dia, Any Pattern Including All Fittings. , S&F Pvc (Swr) Pipes Single Socketed 110Mm Dia In Any Length With Rubber Ring Joints Fixed To Walls , S&F In Rep Pvc (Swr) Bends Any Radius, Bend 110Mm Dia With Access Door , S&F Pvc (Swr) Pipes 75 Mm Bore Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches,Wall Or In Floors. , S&F In Repair Pvc Bends Any Radius 75Mm Bore , S&F In Rep Pvc (Swr) Floor Trap, 75Mm Dia Outlet, Plain With Grating Incl Jointing With Solvent Cement. , S&F In Repair Grating Doom 125Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair Grating Doom 100Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair 32Mm Pvc Waste Pipe For Kitchen Sink ,Whb Complete All As Specified And Directed. , S&F In Repair Pvc (Swr) Wc Connector 110Mm Dia Complete All As Specified And Directed. , S&F In Repair Vitreous China Squatting Pan Orissa Pattern Size 580 X440 Mm White With Integral Foot Rest Complete All As Specified And Directed. , S7f In Repairs 10 Ltrs Capacity Pvc Valveless Syphonic Action Type Flushing Cistern Low Level White With Inlet Ball Valve, Float, Chain And Pull And Brackets Etc Complete All As Specified And Directed. , S & F In Repair Pvc Connection 15Mm Dia 450 Mm Long With Brass Check Nuts And Washers Complete All As Specified And Directed. , S&F In Repair Vitreous China Wash Down Water Closet Pan Of Pedestal Pattern, White With P Or S Traps, Including Connecting To Trap And To Flushing Pipe Etc Complete All As Specified. , S&F In Repair Vitreous China Wash Hand Basin White Flat Back Of Size 550Mmx400 Mm Including Cutting For And Pinning In End Of Brackets,32 Mm Waste Fittings,Brass Chromium Plated For Glazed Ware Sinks,Basins Etc.With Long Screwed Shanks And Fly Nuts Flange End Bedded In Red Lead Cement And Other End Fixed.And Flush Pipe Of Polytethylene Of Low Or High Density Or Pvc 32 Mm Dia Complete All As Specified And Directed. , S&F In Repair Sinks Made Of Stainless Steel With Drainage Board 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar On To Drarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe, Overall Size 495Mm X 420Mm Bowl Size 410Mm X 330Mm X160mm Complete All As Specified And Directed. , S&F Vitreous China Urinals, Bowl Type 465X355x265 Mm White, Providing & Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets, Flush Pipe, Grating And Union For Discharge Pipe Complete All As Specified And Directed. , S & F In Repair Plastic Water Closet Seat Cover, White Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And Directed. , S&F In Repair For Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified , S&F In Repairs Of Waste Fittings 32 Mm Dia, Brass, Cp For Glazed Ware Sink, Basins, Etc. With Long Screwed Shanks And Fly-Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed Complete All As Specified And Directed. , S&F In Repair Cp Towel Ring Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 90 Gms) , S&F In Repair Soap Dish, Any Type, Fiexd To Plugs With Chromium Plated Brass Screws , S&F Cp Towel Rail 600Mm Long Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 190 Gms) , S & F In Repair Looking Mirror 600 Mm X 450 Mm Bevelled Edge Mirror Or Selected Quality Glass, Mounted On 6 Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Specified And Directed. , Dismantling Of Water Tanks Exc 250 Ltrs & N. Exc 500 Ltrs Capacity And Removing To Store. , Dismantling Of Water Tanks Exc 500 Ltrs & N. Exc1000 Ltrs Capacity And Removing To Store. , S&F Pvc Water Storage Tanks Of 500 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S&F Pvc Water Storage Tanks Of 1000 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S & F In Repairs Fancy Type 15Mm Dia Bib Tap, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specifed. , S & F In Repair 20Mm Ball Brass Valves, High Pressure, With Polyethene Float And Flynut Complete Screwed For Iron Pipe Of 20Mm Dia All As Specified. , S&F In Repair 20Mm Gun Metal Globe Or Gate Valve With Iron Wheel Head, Screwed Both Ends For 20 Mm Dia Of Pipe And Fixed Complete All As Specified And Directed. , S & F In Repair Chromium Plated 15Mm Dia Stop Cock Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specified , Supply And Fix In Rep 15Mm Pillar Taps , Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed Complete All As Specified And Directed. , S&F In Repair 15Mm Brass Cp Mixer For Mixing Hot And Cold Water (Wall Mixer) Screwed Down For Iron Pipe Andd Fixed In Repairs For Bath Shower And Kichen Sink With Complete All As Specified And Directed. , S&F In Repair 15 Mm Brass Cp Basin Mixer Unit With All Fittings Required Complete All As Specified And Directed. , S& F In Repair Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And Directed. , S& F In Repair Chromium Plated Shower Roses With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Water Tubing And Connections Including Clfor Refixing Or Removal To Store , S&F 15Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches Complete All As Specified And Directed. , Taking Up Or Down 20 Mm Bore Steel Water Tubing And Connections Including Cleaning Or Refixing Or Removal To Store , S&F 20 Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 20 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 16 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , M & L For 100 Mm Thick Cement Concrete Type D- 2,1:4:8 (40Mm Graded Aggregate) As In Sub Base Complete All As Specified And Directed. , M & L Providing And Laying 60Mm Thick Factorymade Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour,Design & Pattern As In Footparth, Parks,Lawns, Drive Ways Or Light Traffic Parking Etc.,Of Required Strength, Thickness & Size/Shape, Made By Table Vibratory Method Usingpu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compactedbed Of Fine Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paverblocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Sizeand Pattern, Finishing And Sweeping Extra Sand Complete All As Specified . , M&L Chequered Cement Concrete Tiles 20Cmx20cmx25mm Thick With Grey Cement And Pigment, Set Jointed And Pointed In Neat Cement Slurry In Floors Completed All As Specified And Directed By Engr-In-Charge. , Disconnecting Existing Water Tanks Of Capacity Exc 250 Ltrs But N Exc 500 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed. , Disconnecting Existing Water Tanks Of Capacity Exc 500 Ltrs But N Exc 1000 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed.
Contract Date: Jul 02, 2026 Contract Value : ₹ 41.50 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Arunachal Pradesh View Result →
6.
Defence #11097498 AOC
Tender for Taking Down Chowkats Or Frames Not Exceeding 1.5 Sq. M Each (Without Taking Off Shutters From The Frames) , Taking Down Chowkats Or Frames Exceeding 1.5 Sq. M But Not Exceeding 4 Sq. M Each (Without Taking Off Shutters From The Frame) , S & F 165X60mm Pressed Steel Frames For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc.,Complete All As Specified And Directed. , S & F 105X60mm Pressed Steel Frames For Doors With One Or More Rebates Including Necessary Fixing Lugs, Lock Strike Plate, Etc.,Complete All As Specified And Directed. , M&L For Cement Concrete 1:3:6, Type-C-0 (12.5Mm Graded Stone Aggrgate) As In Filling In Steel Frame/Roof Kerbs Or Mud Stops, Rounded Or Chamfered On Edges, Complete All As Specified And Directed. , Refixing Of Shutters Of Any Description But Exc 1 Sq. M And N Exc 2 Sq. M Each All As Specified And As Directed. , S&F 35 Mm Thick Flush Shutters, Solid Core Construction, With Particle Board Core And Plywood Face Panels, Factory Made Commercial Type On Both Sides. , S & F 35 Mm Thick Second Class Hard Wood Kiln Seasoned And Chemically Pressure Treated Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc., (Without Sash Bars), Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut Mitred Beads For Securing Glass Etc. , S&F 25 Mm Thick Flush Shutters, Solid Core Construction, With Particle Board Core And Plywood Face Panels, Commercial Type On Both Sides Including With Necessary Fittings All As Specified And As Directed. , S & F Solid Pvc Moulded Door Frame Of Size 100Mmx45 Mm Made Out Of 5Mm Wood Grain Colour Pvc Sheet Reinforced With Ms Square Etc. , Supplying And Fixing In Factory Made Solid Pvc Moulded Door Shutter 28 To 30 Mm Thick (Style) With 2,4,Or 6 Raised Panel Design With 2 Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawing. , S&F Anodised Aluminium Frame For Doors, Windows, Ventiletors With One Or More Rebates Including Joining Cleat For Fixing Etc Complete All As Specified In Cl Power Coating Above Aluminium Section.(Minimum Thickness Of Poweder Coating 50 Micron). , S&F For Anodised Window/Ventiletor Shutters, Side Hung Type Without Sash Bars Aluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats,Glazing Clips,Ruber Neoprene Packing,Anodised Aluminium Snap Beading Screws,Anodised Aluminium Fittings Such As Peg Stays 150 Mm Long(1 No),Hinges Type-B-21 100 Mm Long( 2 No) Suitable Handle 1 No Complete All As Specified Incl Power Coating Of Any Colour (Thick Ness Of Powder Coating Not Less Than 50 Micron). , S&F Framed Work Such As Grills, Gratings, Etc With Ends Of Bars Shouldered And/Or Revited, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Confirming To Fe.290. Gde-E-165 , S & F 4 Mm Thick Sheet Glass, Ordinary Quality And Glazing With Necessary Aluminium Beads In Squares Not Exceeding 0.5 Sq. M In Each Pane All As Specified And Directed. , S & F 4 Mm Thick Sheet Glass, Ordinary Quality In Square Exc 0.50Sqm Each Pane Glazed Aluminium Fitting With Necessary Fitting All As Specified And Directed. , S & F 4 Mm Thick Frosted Glass, Ordinary Quality In Square N Exc 0.50Sqm Each Pane Aluminium Beads With Necessary Fitting All As Specified And Directed. , Supplyand Fixed Ss Wire Cloth With 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40 Mm And Fixed With Aluminium Stapple Complete All As Specified And Directed. , S&F In Repair 18/19 Mm Thick Pre-Laminated Particle Boards Exterior Grade Prelaminated Both Sides With Decoratative Choice Lamination Fixed In Alum Frame Work As Specified And As Required. , S & F 100 Mm Long Medium Weight, Cold Rolled Mild Steel Butt Hinges And Fixed. , S & F 150 Mm Long Extruded Aluminium Alloy Handles, Fabricated Type, Anodised. , S & F 150 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section , S & F 300 Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy. , Supply Fix In Repairs Harrison Rails, Mild Steel, Chromium Plated Fixed Alongwith 2 Nos. Of Brackets, Stops, Rollers Etc, Complete All As Specified. , S&F In Repairs 10 Ltrs. Capacity Pvc Flusing Cistern Low Level Slimline Or Equivalen Make / Model With All Accessories. , Supply & Fix In Repairs Vitreous China Curtis Set 610X350x710 P Trap Snow White Two Piece Hall Hung Ewc With B1020105 Twin Flush Plastic Cistern And B1510101 Carina Seat Cover Including Flush Pipe And Fittings P Or S Traps. , S&F In Repairs Vitreous China Squatting Pan , ‘Orissa Pattern, Size 580 X 440 Mm White, With Integral Foot Rests (Excluding Flushing Cistern And Flush Pipe). , S & F In Repairs Vitreous China Ware Wash Hand Basin White, Flat Back, Size 450 X 300 Mm Size Including Cutting For And Pinning Ends Of Brackets Or Erecting Stand Including Pedestal All As Specified And As Directed. , S & F For Cromimum Plated Helth Faucet Shower With Cp Flexible Pipe Up 15 Mm Bore (Abs Body) With 1 Mtr Long Easy Flex Tube In Chrome Finish Complete All As Directed , Pvc Connection 15 Mm Bore 450 Mm Long , S&F In Repairs Brass Cromium Plated Tubular Towel Rail, 20Mm Dia, D Type, 60Cm Long Between Flanges. , Supply And Fix 600Mm X 450 Mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6 Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Incl Taking Down Old One. , S&F In Repairs Sinks Made Of Stainless Steel 1Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar Of Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mmx460mm Bowl Size 410Mmx330mmx160mm. , S&F Kitchen Plate Rack Made Of Stainless Steel Sheet Not Less Than 0.63Mm Thick Of Over All Size 1050Mm X 750Mm X 250Mm Complete All As Specified And As Directed. , Dismantling Floor, Hearth Or Wall Tiling Incuilding Cement Mortar Bedding (But Not Backing) Removing Serviceable Tiles To Store And Rubbish Off The Permises. , Glazed Ceramic White Tiles In Vertical Surfaces 300X600x7 Mm Thick Set And Jointed In Neat Cement Slurry & Painted In White Or Colour Cement To Match Incl Sreed Bed 10 Mm Thick In Cm 1:4 . , M&L Non - Skid White Ceramic Tiles (Square/ Rectangular) Area Of Each Tile 300X300x8 Mm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Including Screed Bed Or Bedding Layer Of Cement Mortar 1:6, 15 Mm Thick For Laying Floor Finishes. , M&L Non - Skid White Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile 600X600mm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Including Screed Bed Or Bedding Layer Of Cement Mortar 1:6, 15 Mm Thick For Laying Floor Finishes. , M& L For Granite Of Any Type 20 Mm Thick Machine Cut Bedded And Jointed With Grey Cement Slurry And Pointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Grinding And Polishing Complete Incl 20 Mm Thick Screed Bed 1:6 Cm In Floors In Cluding Demolition All As Specified And Directed. , M& L For 20Mm Thick Granite (Of Any Type) Tiles Machine Cut, In Skirting/ Dado Laid Over Cement Screed And Jointed With Grey Cement Slurry, And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Grinding And Polishing Complete Incl 20 Mm Thick Screed Bed 1:6 Cm In Floors In Cluding Demolition All As Specified And Directed. , M& L For Kota Stone Slab Flooring Of 20-25 Mm Thick Over Cement Screed Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of Slab Including Grinding And Polishing Complete Incl 20 Mm Thick Screed Bed 1:6 Cm In Floors. , M& L For Kota Stone Slab Of 20-25 Mm Thick In Riser,Of Steps, Skirting, Dado Over Cement Screed Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of Slab Including Grinding And Polishing Complete Incl 10 Mm Thick Screed Bed 1:4 Cm In Floors. , M&L For 75 Mm Thick Cement Concrete As In Plinth Protection Type C-1 1:3:6 (Using 20Mm Graded Aggregate) Finishing Concrete Surface Even And Smooth With Using Extra Cement Complete All As Specified And Directed. , Demolition Of Concrete In Ground Floors And Pavings N Exc 15 Cm Thickness (Below Or Above Ground Level) , M&L For Pre-Cast Reinforced Cement Concrete 1:2:4 Type B1 Using 20Mm Graded Stone Aggregate As In Landing, Cover Slabs (For Manhole Covers, Drains , Shelvess Etc) Set In Cm 1:6 Including Demolition Complete All As Specified. , M & L For Tmt Reinforcement 10 Mm Dia And Over Cut To Length Bent To Shape Including Cranking, Hooking Etc Binding With Mild Steel Wire Not Less Than 0.90 Mm Dia (Annealed) All As Directed Complete. , Dismantling Wall And Ceiling Boards (Fibre, Pulp, Insulation Etc.) Any Thickness, Including Cover Fillets. , S&F For Anodised Aluminium/ Gi Snap Grid Power Coated Framed Work Of Size Main Runner 39X24.70X0.80 Mm, Cross Tee Size 29.X24.70X0.80 Mm, Wall Angle 22.2X22.2X0.65 Mm And Size Of Grid 605X605 Mm For False Ceiling All As Specified With Hangers 3 Mm Thick Gi (Upto 1200 Mm Length) Adjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats If Required Made Out Of Gi Flat 40X3 Mm Size 60 Mm Long And Expansion Hold Fasteners 12.5 Mm Dia 40 Mm Long Complete All As Specified And As Directed. , M & L For 4M Thick Non Asbestos Designed Cement E Board Incl Two Coats Of Distempering In One Side As Approved By Ge Of Size Fixed In Ceiling As Specified And Directed. , Taking Down Cement Plaster On Brick Or Stone Walls, Etc., Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. , Demolition Of Brick Work Or Stone/ Boulder Masonry Built In Cement Mortar Or Cement Lime Mortar Including Removal To Rubbish Complete All As Specified And As Directed. , M&L Brick Work With Sub Class B Bricks Straight Of Curved On Plan Exc 6M Mean Radius Built In Cm 1:6 Including Flush Pointing With Same Mortar As The Work Proceed Complete As Specified. , M&L For 15 Mm Thick Plaster On Fair Faces Of Brick Work Or Concrete Surface In Cm (1:4) With Wpc @2% By Weight Face Of Conc Work To Wall Surface And The Surface Is Finished Even And Smooth Without Using Extra Cement , M&L Rendering 15Mm Thick On Other Than Fair Faces Of Brick Or Concrete Surfaces In Cement Mortar 1:6 Finished Even And Smooth. , M&L Rendering 5Mm Thick Of Cement Plaster 1:3 On Concrete Surfaces Of Ceiling Finished Even And Smooth(Without Using Extra Cement.). , Supply Only Integral Water Proofing Compound , Roughening / Complete Removing Existing Treatment Incl Plain Cement Concrete Pedding Of Roof Surfaces By Picking, Sweeping Clean And Washing Down With Water To Remove Dust Etc., , M&L For Brushing Neat Cement Slurry With 03 Kg Of Cement Per Sqm. , M&L For Screed Bed 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 . (Internal Water Proof Compound Measured Seperately) , M&L 25 Mm Thick Cement Concrete Plain Cement Concrete Type B0 1:2:4 Using 12.5 Mm Graded Aggregate. , M&L App Based Polymeric Membrane Minimum Weighing 3Kg/Sqm And Minimum 3Mm Thick Reinforced With Polyster Non Wove Fabric (Wt. Not Less Than 150 Gms/Sqm) Land On Primed Surface By Forced Application Including Coating The Surface With Water Based Bituminous Primer Blow Bitumen Of 85/25 Or 90/15 At 1.2 Kg/Sqm Both At Bottom And Top Of The Membrance And Finally Finished With One Coat Of Bitumenous Aluminium Primer At 100 Gm Per Sqm Complete All As Specified. , Taking Down Rain Water Pipes Inculding All Fittings Any Size And Pattern , S & F 75 Mm Bore Pvc (Swr) Soil, Waste And Vent Pipes Single Socketed In Any Length With Rubber Ring Joints Fixed To Walls. , S & F 110 Mm Bore Pvc (Swr) Soil, Waste And Vent Pipes Double Socketed In Any Length With Rubber Ring Joints Fixed In Walls. , S & F 110 Mm Bore Pvc (Swr) Bends Of Any Radius. , S & F 75 Mm Bore Pvc (Swr) Bends Of Any Radius. , S & F 110 Mm Bore Pvc (Swr) Junction Single (Single T) Equal Or Unequal With Access Door , S & F 75 Mm Bore Pvc (Swr) Vent Cowl , M&L 75 Mm Bore For Cast Iron Nahani Trap With Grating Incl Jointing To Waste Pipe Fixed In Cement Concrete Type B-1 (1:2:4) , Supply & Fix 32 Mm Dia., Waste Fittings, Brass Chromium Plated For Glazed Ware Sinks, Wash Basins Etc., With Long Screwed Shanks And Fly Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed. , Supply & Fix 40 Mm Dia., Waste Fittings, Brass Chromium Plated For Glazed Ware Sinks, Wash Basins Etc., With Long Screwed Shanks And Fly Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed. , Taking Up Or Down 15 Mm Bore Steel Tubing And Connections, Including Cleaning For Refixing Or Removal To Store , Taking Up Or Down 20 Mm Bore Steel Tubing And Connections, Including Cleaning For Refixing Or Removal To Store , Taking Up Or Down 25 Or 32 Mm Bore Steel Tubing And Connections, Including Cleaning For Refixing Or Removal To Store , Supply And Laying 20 Mm Dia Cpvc Pipes Sdr 11 & Plain Cpvc Sdr 11 Fittings On Walls/Ceiling Or Laying In Floors Complete All As Specified. , Supply And Laying 25 Mm Dia Cpvc Pipes Sdr 11 & Plain Cpvc Sdr 11 Fittings On Walls/Ceiling Or Laying In Floors Complete All As Specified. , Supply And Laying 32 Mm Dia Cpvc Pipes Sdr 11 & Plain Cpvc Sdr 11 Fittings On Walls/Ceiling Or Laying In Floors Complete All As Specified. , S & F In Repairs 15Mm Bore Angular/ Concealed Stop Valves, Cast Copper Alloy Screwed Down High Pressure With Crutch Or Butterfly Handle Screwed Both Ends For Iron Pipe Or For Unions. , S & F In Repairs 15 Mm Bore Chromium Plated Bib Taps, Cast Copper Alloy, With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule. , S & F In Repairs 15 Mm Bore Fancy Type Pillar Taps, Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe And Fixed. , S & F In Repairs Chromium Plated Shower Rose 125 Mm Size With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union , M&L For Rebuilding The Section Of Damaged Reinforced Cement Concrete Elements To Its Original Size Or As Per Consultants Recommendation In Thickness Of 40-100Mm By Providing And Casting With Ready To Use Non Shrink, Cementitious Free Flow Micro-Concrete Sikarep Microcrete-4 Or Equivalent Having Compressive Strength 60 N/Mm2 (28 Days) According To Astm C 1107-99 Including Providing And Fixing Of Watertight Foam Faced Finish Shuttering Of Minimum 18Mm Thickness And Supporting Formwork, All Lead Lift, Mixing, Placing, De-Shuttering, Levelling The Surface By Grinding Off Cementitious Slurry Or Cementitious Joints Differences If Any To Satisfaction Of Engineer-In-Charge And Curing. , Preparation Of New Steel Surfaces Of Any Description, Over 10 Cm Width Or Girth, Not Otherwise Described Appling One Coat Of Red Oxide, Zinc Chorme And Applying Two Coat Of Synthetic Enamel Paint. , Preparation Of Old Painted Steel Surfaces Of Any Description, Over 10 Cm Width Or Girth, Not Otherwise Described Appling One Coat Of Synthetic Enamel Paint. , Preparation Of New Or Previously Treated Wood Surfaces Of Any Description, Over 10 Cm Width Or Girth , Not Otherwise Described Appling One Coat Of Pink Primer Over Applying Two Coat Of Synthetic Enamel Paint. , Preparation Of Old Painted Wood Surfaces Of Any Description, Over 10 Cm Width Or Girth, Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint. , Material & Labour For Preparation Of New Wall Surface Appling Two Or More Coats Of 100% Premium Acrylic Exterior Emulsion Paint With Silicone Additives Of Required Shade Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @2.20 Litre/ 10 Sqm Over New Surface All As Specified And As Directed. , M & L For Complete Removal Of Old Surface For Preparation Of Old Wall Two Or More Coats Of 100% Premium Acrylic Exterior Emulsion Paint With Silicone Additives Of Required Shade Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @2.20 Litre/ 10 Sqm Over New Surface All As Specified And As Directed. , M&L For Preparation Of New Plastered Surfaces Of Walls And Applying Over And Including 1Mm Thick Wall Care Putty One Primer Coat And Two Coats Of Acrylic Distemper Including Plastered Surface To Prepara-Tory To Distempering Complete All As Specified And Directed. , M&L For Complete Removal Of Old Surfaces Of Walls And Applying Over And Including 1Mm Thick Wall Care Putty One Primer Coat And Two Coats Of Acrylic Distemper On Plastered/Putty Surface To Prepara-Tory To Distempering Complete All As Specified And Directed. , Preparing New Surfaces Of Ceilings By Brooming Down Or By Steel Wire Brushing And Applying Three Coats Of White Wash. , M&L For Preparation Of Old Decorated Plastered Surfaces Of Ceiling And Applying One Coat Of White Wash Complete. , Dismantling Water Tanks And Removing To Store Exc 500 & Not Exc 1000 Ltrs , S&F 500 Ltrs. Capacity Rotational Moulded Polyethylene Water Storage Tanks (Cylinder Vertical With Class Top) Hoisted And Fixed In Position All As Specified Including 20Mm Bore Ball Brass Valves, High Pressure, With Polythene Float And Flynut Complete Screwed For Iron Pipe Or Brass Ferrule And Fixed. , M&L For 100 Mm Thick Plain Cement Concrete Type C-2 1:3:6 Using (40 Mm Graded Aggregate) As In Sub Base All As Specified And Directed. , Providing And Laying 60Mm Thick Factory Made Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour, Design & Pattern As In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc., Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compacted Bed Of Coarse Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Fine Sand And Cutting Of Paver Block As Per Required Size And Pattern, Finishing And Sweeping Extra Sand; Complete , Taking Down Carefully Existing Unserviceable Copper/ Aluminium Point Wiring (Light,Fan , Call Bell, Two Way, Socket Or Power Point Etc) Complete With Fittings/Fixures Such As Switches Sockets, Ceiling Rose, Fan Regulators, Bell Push,Call Bell,Bracket Light Fittings And Making Good To The Disturbed Surface Complete All As Directed By Engr-In-Charge. , Taking Down The Existing Unservicable Main Switch/ Cut Out/ Dbs Of Any Type/ Capacity/ Description As Existing At Site Including Making Good The Disturbed Surfaces To Match With The Existing Finishes All As Specified By Engr-In- Charge. , Taking Down Carefully Unsv Aluminium Submain Wiring Of Any Type /Location Including Conduit /Casing And Earth Wire And Making Good The Distributed Surface Of Walls /Ceiling Matching With Existing Finishes All As Directed By Engr-In-Charge. , Taking Out Unsv Ug Cable Any Cross Sectional Area And Connection Of Any Description Of Any Description Laying In Trenches Or Fixing With Wall Or Poles All As Specified And Directed. , Taking Out Unsv Ug Cable Any Cross Sectional Area And Connection Of Any Description Of Any Description Laying In Trenches Or Fixing With Wall Or Poles All As Specified And Directed.
Contract Date: Jun 30, 2026 Contract Value : ₹ 1.18 Crore
Statutory Bodies & Commissions/Committees No of Bidders 12
Assam View Result →
7.
Rural Development #10976354 Technical Bid
Tender For Special Repair Of P.W.D Road - Sanabandal- 1 Clearing Grass And Removal Of Rubbish Up To A Distance Of 50 Mtr Outside The Periphery Of The Area And Disposal Of Unserviceable Materials And Stacking Of Serviceable Material To Be Used Or Auctioned, Up To A Lead Of 1000 Metres Including Removal And Disposal Of Top Organic Soil Not Exceeding 150 Mm In Thickness As Per Specification And As Per The Direction Of Eic 2 Dismantling Of Cement Concrete Grade M-15 & M20 Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres 3 Upto 600Mm Dia 4 Scarifying The Existing Bituminus Road Surface To A Depth Of 50M And Disposal Of Scarified Material Within All Lifts And Lead Upto 1000Mt. And As Per The Direction Of Engineer-In-Charge. 5 Reworking The Scarified Bituminus Surface Suitably After Supplementing The Base Materials With Stone Screened Dust Compacting Finished Surface As Per Clause No 501.8.3.2 Of Mort &H Specification For Raod & Bridge Works (4Th Revision) And As Per The Direction Of Engineer-In-Charge. 6 Excavation For Roadwork In Soil With Hydraulic Excavator Of 0.9 Cum Bucket Capacity Including Cutting And Loading In Tippers, Trimming Bottom And Side Slopes, In Accordance With Requirements Of Lines, Grades And Cross Sections, And Transporting To The Embankment Location Within All Lifts And Lead Upto 1000M Complete And As Per Specification And As Per The Direction Of Eic 7 Construction Of Embankment With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site By Manual Means Within A Lead Of 5Kms, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Table 300-2 & Clause 305 Of Mosrt&H Specifications For Road & Bridge Works (4Th Revision)And As Per The Direction Of Engineer In Charge. 8 Construction Of Embankment With Approved Materials Deposited At Site From Roadway Cutting And Excavation From Drain And Foundation Of Other Structures Graded And Compacted To Meet Requirement As Per Mord Technical Specification Clause 301 And Direction Of The Engineer In Charge (Excluding Cost Of Excavation And Transportation To Site). 9 Construction Of Granular Sub-Base By Providing Close Graded Granular Sub Base Grading Iii Material As Per Table 401-1, Spreading In Uniform Layer With Moter Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc ,And Compacting With Vibratory Roller To Achieve The Desired Density Complete As Per Clause 401 Of Mosrt&H Specification For Road & Bridge Works (4 Th Revision) 10 Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Pre Mixing The Material With Water At Omc In Mechanical Mix Plant, Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers With Paver In Subbase/Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achieve The Desired Density As Per Clause 406 Of Mosrt&H Specifications For Road & Bridge Works (4Th Revision). 11 Construction Of Un-Reinforced, Construction Of Un-Reinforced, Plane Cement Panneled (0.5M X 0.5M) Concrete , Thickness As Per Thee Design, Over A Prepaired Sub Base, With 43 Grade Cement Or Any Other Type As Per Cluse 1501.2.2 M30 (Grade), Course And Fine Aggregate Conforming To Is:383, Maximum Size Of Course Aggregate Not Exceeding 25Mm, Mixed In A Concrete Mixture Of Not Less The 0.2 Cum Capacity And Appropriate Weight Batcher Using The Approved Mix Design, Laid In Approved Fixed Side Form Work (Steel Channel, Laying And Fixing Of 25Mm Micro Thick Polythene Film, Wedges Steel Plates Including Levelling The Form Work As Per Drawing), Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrator And Finished In The Contineous Operation Includion Provision Of Construction And Expansion, Construction Joint, Applying Debonding Strips, Primer, Sealant, Near Approaches To Bridge/Culvert And Construction Joints, Admixture As Approved, Curing Of Concrete Slabs For 14-Days, Water Finishing To Lines And Grade As Per Drawing And Technical Specification Cluse 1501.Panels Are To Be Made By Cuttion Grooves Of 3 To 5 Mm Thick And 25 To 30 Mm Deep In Cc Slab. The Grooves Are To Be Filled With Vg-30 Bitumen With A Spray Of Fine Sand At Top. 12 Providing And Applying Primer Coat With Bitumen Emulsion (Ss) On Prepared Surface Of Granular Base Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.60 Kg/Sqm Using Mechanical Means As Per Technical Specification Clause 502 Of Mosrt&H Including Cost, Conveyance, Royalty, Taxes Of Chips And Bitumen & Other Required Materials Etc. Complete And As Per Direction Of Engineer-In-Charge. 13 Providing And Laying Tack Coat With Penetration Grade Of Bitumen Emulsion (Rs) Of 0.20 Kg Per Sqm After Scraping Cleaning The Road Surface Including Cost, Conveyance Royalty Of All Materials, T&P Labour, Hire Charges Of Machinaries Etc. Complete As Per Technical Specification Clause 503 Of Mosrt&H And As Per Direction Of The Engineer In Charge. 14 Providing And Laying Bituminous Macadam With 60-90 Tph Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading Premixed With Bituminous Binder, Transported To Site, Laid Over A Previously Prepared Surface With Paver Finisher To The Required Grade, Level And Alignment And Rolled As Per Clauses 501.6 And 501.7 To Achieve The Desired Compaction 15 Providing And Laying Semi Dense Bituminous Concrete With 100-120 Tph Batch Type Hmp Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 To 5 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Spefn. Clause No. 508 Complete. 16 Fine Dressing And Turfing To The Slopes Of The Road Embankment With Compact Dub Gross Transported By Mechanical Means As Per The Direction Of The E.I.C. 17 Road Marking With Hot Applied Thermoplastic Compound With Reflectorising Glass Beads On Bituminous Surface As Per The Direction Of The E.I.C. 18 Earth Work In Excavation Of Foundation & Plinth In Hard Soil Including Levelling The Bed Etc Complete As Per The Direction Of Engineer In Charge. 19 Providing And Filling Manually With Selected Sand In Layers Not Exceeding 200Mm Thick Including Watering And Compacting With All Leads And Lifts Etc. For Finished Item Of Work As Per Specification. 20 Hpc 300 Mm Dia 21 Hpc 600 Mm Dia 22 Hpc 1000 Mm Dia 23 Cement Concrete Of M-150 Having Maximum Compressive Strength Of 150 Kg./Cm2 ( Test To Be Conducted) On 150 Mm. Cubes Tested At 28 Days Including Curing (Tests Conducted In Accordance With Is-456 & Is-516) & Conforming To Clause-302 Of Irc 21/1987 Using Clean Crusher Broken Hard Granite Coarse Aggregate Of 40 Mm. Size Down Grade Of Approved Quality To Be Protested In The Laboratory) Obtained From Approved Quarry The Proportion Mix, Grading Conforming To Relevant Isi/Irc Codes Pre-Approved Including Arranging Of Reinforcement As Per Approved Drawing Including Hoisting, Lowering Concrete In Layers Not Exceeding 150 Mm. Thick Each Compacting With Vibrator Watering & Curing For 28 Days Centering Shuttering & Finishing The Exposed Surface Smooth Providing Grooves & Beads Where Necessary Including Cost, Conveyance Royality & Taxes Of All Labour Machineries Etc. Required For The Work Complete In All Respects Including Dismantling The Centering & Shuttering As Per Specification & Direction Of Engineer-In-Charge.----Foundation 24 Above Bed Level 25 Construction Of Precast Rcc Railing Of M25 Grade, Aggregate Size Not Exceeding 12 Mm, True To Line And Grade, Tolerance Of Vertical Rcc Post Not To Exceed 1 In 500, Centre To Centre Spacing Between Vertical Post Not To Exceed 2000 Mm, Leaving Adequate Space Between Vertical Post For Expansion, Complete As Per Approved Drawings And Technical Specifications. 26 Rcc Of Design Mix Of M-25 Grade Having Specified Characteristics Compressive Strength/ Target Mean Strength Of 300Kg./Cm2 In Design Mix With Minimum Quantity Of Cement As Specified In Irc Code Of 150 Mm. Cubes At 28 Days Curing After Mixing & Tests Conducted In Accordance With Relevant Clauses Of Is 456/Is 516/Irc 216/1987/Irc-78/1983 Using Crusher Broken Granite Course Aggregate Of 20Mm. .Sizes & Proportion As Specified In Clause-302.6.2 Of Irc 21/1987 & Is-10262 & Subject To Mix Design In Conformity With The Grading & Proportion Of Different Materials For Concrete As Specified In The Relevant Codes Of Approved Quality, Obtained From Approved Quarry & Using Minimum Quantity Of Cement Confirming To Codal Provision Including Hoisting, Lowering & Laying Concrete In Layers Not Exceeding 15Cm Thick Compacting With Vibrators Watering & Curing For 28 Days Including Water Tight Steel Centering , Shuttering & Form Works Finishing The Exposed Surface Smooth Providing Beads & Grooves Wherever Necessary Including Cost, Conveyance Royalties And All Other Taxes Of All Materials With All Leads & Lifts, Cost Of All Labour T&P & Machineries Etc. Required For The Work Including Dewatering If Necessary, Complete In All Respects As Per Direction Of The Engineer-In-Charge But Excluding Cost, Conveyance Of Tor Steel & Binding Wire & Labour Charges For Straightening, Cutting, Bending, Binding Welding & Tying The Grills Lapping Spacing Etc. Where Ever Necessary & Hoisting & Placing In Position ( To Be Paid Separately As Required For Rcc Works) ----Raft 27 Abutment & Pier (Above Bed) 28 Deck Slab 29 Cover Slab (Drain) 30 Rcc Of Design Mix Of M-300 Grade Having Specified Characteristics Compressive Strength/ Target Mean Strength Of 300Kg./Cm2 In Design Mix With Minimum Quantity Of Cement As Specified In Irc Code Of 150 Mm. Cubes At 28 Days Curing After Mixing & Tests Conducted In Accordance With Relevant Clauses Of Is 456/Is 516/Irc 216/1987/Irc-78/1983 Using Crusher Broken Granite Course Aggregate Of 20Mm. .Sizes & Proportion As Specified In Clause-302.6.2 Of Irc 21/1987 & Is-10262 & Subject To Mix Design In Conformity With The Grading & Proportion Of Different Materials For Concrete As Specified In The Relevant Codes Of Approved Quality, Obtained From Approved Quarry & Using Minimum Quantity Of Cement Confirming To Codal Provision Including Hoisting, Lowering & Laying Concrete In Layers Not Exceeding 15Cm Thick Compacting With Vibrators Watering & Curing For 28 Days Including Water Tight Steel Centering , Shuttering & Form Works Finishing The Exposed Surface Smooth Providing Beads & Grooves Wherever Necessary Including Cost, Conveyance Royalties And All Other Taxes Of All Materials With All Leads & Lifts, Cost Of All Labour T&P & Machineries Etc. Required For The Work Including Dewatering If Necessary, Complete In All Respects As Per Direction Of The Engineer-In-Charge But Excluding Cost, Conveyance Of Tor Steel & Binding Wire & Labour Charges For Straightening, Cutting, Bending, Binding Welding & Tying The Grills Lapping Spacing Etc. Where Ever Necessary & Hoisting & Placing In Position ( To Be Paid Separately As Required For Rcc Works) ---Wearing Coat 31 Supply Of Hysd Bars Confirming To Grade S-415 Cutting Bending, Binding, Lapping, Splicing, Welding Etc. (Conforming To Isi Specification) & Jointing If Necessary By Lapping & Tying The Grills & Placing In Position As Required For Rcc Works As Per The Approved Design, Hoisting, Lowering & Laying Position Including Cost & Conveyance Of Tor Steel & Binding Wires Of 18 To 20 Gauge(As To Be Approved By The Deptt.) Etc. Complete (Weight Of Binding Wire Shall Not Be Considered For Payment At All Which Will Be Borne By The Contractor (Standard Co-Efficient Of Different Sizes Of The Steel Shall Be Considered & Welding & Lapping Should Confirm To Relevant Clause Of Irc-21/1987) 32 Providing & Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600Mm With 40Mm Metal Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall Etc. Complete. 33 Providing Rough Stone Dry Packing / Pitching In Approns And Revetments For Slope Protection Including Cost And Conveyance Of All Materials To Site Etc. Complete (15Cm And Above)And As Per The Direction Of Engineer In Charge. 34 Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing 35 Providing And Fixing Of Typical Pmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be We Be Welded To 2 Nos. 75Mmx75Mm Of12 Swg Sheet Tubes Posts Duly Embeded In Cement Concrete M-15 Grade Block Of 450Mm X450Mmmm X600Mm ,600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mmx 47Mm Of 12 Swg Steel Plate Tube. All M.S Will Be Stove Embelded On Both Sides .Lettering And Printing Arrows Border Etc. Will Be Painted With Ready Mixed Synthetic Enamelpaint Of Superior Quality In Required Shade Andcloure.All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coat Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1 36 Providing And Fixing Of Typical Mmsy Citizen Information Board As Per Mord Specification And Drawing. Three Ms Plates Of 50 X 5 Mm. Thick, Back Plate Duty Welded With 75 Mm Dia Steel Tubes Back On Edges As Per Drawings. The Upper And Lowe Plate Will Be Welded With Ms Flat Iron Frame Of 50Mm X 5 Mm. The Steel Tubes Dully Embeded In Cement Concrete M-15 Grade Blocksw Of 600Mm X 600 Mm X 750 Mm Below Ground Level. All Ms Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Redimixed Synthetic Enamel Paint Of Superor Quality In Required Shade And Colour. All Selection Of Framed Posts And Steel Tubes Will Be Painted With Primer And Two Coats Of Epoxupaint As Per Drawing Clause 1701 And Annexure - 1700.1. 37 Providing And Fixing Of Semi Reflective Cautionary, Mandatory And Informatory Sign Board As Per Irc:67 Made Of 1.5 Mm Thick Ms Sheet Duly Stove White Colour In Front And Gray Colour On Back With Red Reflective Border Of 65 Mm Width And Required Letters And Figures With Reflective Tape Engineering Grade As Per Clause 1701.3.9 Of Mord For Rural Roads Of Required Shade And Colour Supported And Welded On 47Mm X 47 Mm X 12 Swg Sheet Tube Firmly Fixed To The Ground By Mean Of Properly Designed Foundations With M-15 Grade Cement Concrete 450X450X600 Mm, 600 Mm Below Ground Level As Per Approved Drawing Clause 1701.2.2 Of Mord---600Mm Equilateral Triangle 38 600Mm Circular 39 Providing And Erecting Direction And Place Identification Of Semi Reflective Sign Boards As Per Irc-67 Made Of 2 Mm Thick M.S. Sheet Duly Stove Enameled Paint White Colour In Front And Grey Colour On Back With Reflective Border Of 70 Mm Width And Required Message, Letters, Figures With Reflective Tape Of Engineering Grade As Per Mord Specifications Of Required Shade And Colour. Supported And Welded On Two Nos. 47 Mm X 47 Mm Of 12 Swg Square Tube Of 3050 Mm Height Duly Strengthened By 25 Mm X 5 Mm Ms Flat Iron On Edges On Back Firmly Fixed To The Ground By Means Of Properly Designed Foundations With M-15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701 Of Mord 40 Providing And Fixing Reinforced Cement Concrete M15 Grade Guard Stone/Local Stone Of Standard Design As Per Irc:25 Fixed Position Including Finishing And Lettering But Excluding Painting As Per Drawing And Technical Specification Clause 1704 Of Mord. 41 Providing And Fixing Reinforced Cement Concrete M15 Grade Kilometer Stone/Local Stone Of Standard Design As Per Irc:8 Fixing In Position Including Painting And Printing, Etc As Per Drawing And Technical Specification.---Ordinary Kilometer Stone 42 200 Mm Stone 43 Restoration Of Rain Cuts With Soil, Moorum Gravel Or A Mixture Of These, Clearing The Loose Soil, Benching For 300Mm Width Laying Fresh Material In Layers Not Exceeding 250 Mm And Compaction With Plate Compactor Or Power Rammer To Restore The Original Alignment ,Level And Slopes As Per Technical Specification Clause 19021 St Year 44 2 St Year 45 3 St Year 46 4 St Year 47 5 St Year 48 Making Up Loose Of Material/Irregularities On Shoulders To The Design Level By Adding Fresh Approved Selected Soil And Compacting It With Appropriate Equipment At Omc Upto A Lead Of 1000 M As Per Technical Specification Clause 19031 St Year 49 2 St Year 50 3 St Year 51 4 St Year 52 5 St Year 53 Stripping Excess Soil From The Shoulder Surface To Achieve The Approved Level And Compacting With Plate Compactor At Omc As Per Drawings And Technical Specification Clause 19031 St Year 54 2 St Year 55 3 St Year 56 4 St Year 57 5 St Year 58 Maintenance Of Bt Road Including Filling Up Pot Holes And Removal Of Loose Material, Trimming Of Sides, Cleaning Of Surface By Providing Tack Coat, 20 Mm Thick Pre-Mix Carpet And Seal Coat Type B Specification Clause 1904.2 ,19061 St Year
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 9
Odisha View Result →
8.
Educational and Research Institute #10967168 AOC
Equipment For Civil Lab Equipment For Civil Lab, Basic Civil Lab, Transport And Highway Lab, Advance Structural Lab , Equipment For Basic Civil Engineering Laboratory (Sheet 1) , Equipment For Advanced Structural Testing Laboratory(Sheet 2) , Equipment For Transportation & Highway Laboratory (Sheet 3) , Service(Sheet 4)-1 1 Concrete Mixer, Pan Type 2 Mould, Cast Iron, for 150mm Cube with ISI marked and NABL calibration Certificate 3 Beam Mould, 100mm x 100mm x 500mm 4 Beam Mould, 150mm x 150mm x 700mm 5 Cylindrical Mould, Cast Iron, Split Lengthwise 150 mm diameter x 300mm high 6 Mould, Steel, for 70.6mm cube with ISI Mark and NABL calibration Certificate 7 Tamping Rod 8 Vibrating Table 9 Slump Test Apparatus 10 Consistometer (Vee Bee Consistometer) 11 Flow Table, Motorized 12 Compaction Factor Apparatus 13 Concrete Penetrometer, Spring Type 14 Air Entrainment Meter Capacity 0.005m3 (5 liters) suitable for aggregate size up to 38mm 15 Curing Tank for 6/24moulds of 150mm/70.6mm size with NABL Calibration Certificates 16 Accelerated Curing Tank for 6 moulds of 150mm size with NABL Calibration Certificates 17 Capping Set, Vertical, for capping 150mm dia cylinders and cores 18 Concrete Permeability Apparatus 19 Compressor for Permeability Apparatus 20 Air Permeability Apparatus (Blaine type) 21 Vicat Apparatus 22 Le-Chatelier Mould 23 Le-Chatelier Water Bath with Controller 24 Le-Chatelier Flask 25 Shrinkage Bar Mould with NABL Calibration Certificate 26 Cement Autoclave 27 Length Comparator, Digital 28 Flow Table, Electric Operated 29 Automatic/Manual Digi Mortar Mixer Capacity 4.75litre 30 Vibration Machine, with built-in Digital Timer, NABL Calibrated 31 Gauging Trowel 32 Gauging Trowel 33 Sieves Set (Course) 34 Sieves Set (Fine) 35 Concrete test Hammer 36 Automatic Compression Testing Machine 37 Flexure Test Attachment 38 RCPT (4 CELL MODEL) 39 Drying Shrinkage 40 Carbonation Test Chamber 41 1000kN Beam Testing Set Up 42 Pycnometer 43 Pull off tester 44 Hot Air Oven 45 Sieve shaker (Motorized) 46 Sieve shaker (Motorized) 47 Electronic Weighing Balance with Legal Metrology Test Certificate 48 Electronic Weighing Balance with Legal Metrology Test Certificate. 49 Electronic Weighing Balance with Legal Metrology Test Certificate. 50 Electronic Weighing Balance with Legal Metrology Test Certificate. 51 Electronic Weighing Balance with Legal Metrology Test Certificate. 52 Impact of Jet on Vanes Apparatus 53 Orifice Meter Apparatus 54 Flow Over Notch Apparatus 55 Friction in Pipelines Apparatus 56 Venturimeter Apparatus 57 Orifice & Mouthpiece Apparatus Bernoullis Theorem Apparatus 59 Reynolds Apparatus60 Metacentric Height Apparatus 61 Study of Pipe Fittings, Sudden Enlargement & Contraction Apparatus 62 Force Vortex Apparatus 63 Pelton Wheel Turbine Test Rig 64 Francis Turbine Test Rig 65 Reciprocating Pump Test Rig 66 Standard Penetration Test (SPT) 67 `A Drill Rod, 1m long complete with adaptor 68 Dynamic Cone Penetration Test Apparatus (DCPT) 69 `A Drill Rod, 1m long complete with adaptor 70 Hand Operated Extractor 38mm mm dia specimen 71 Sampleject-5000, Hydraulic sample extruder, Electronic cum hand operated 72 Speedy Moisture Meter, Range 0-25% (Gauge Div.:0.5%) with digital weighing balance 73 Infra-Red Moisture Meter 74 Liquid Limit Device, motorised, with Casagrande grooving tools and gauge block 75 Liquid Limit Device, Hand Operated, with Casagrande grooving tools and gauge block. 76 Plastic Limit set comprising of glass plate, Brass rod, Spatula, Moisture Tin & Porcelain Dish. 77 Shrinkage Limit Set 78 Universal Penetrometer 79 Penetration Test Cone 80 Penetration Test Cup, 55 mm dia x 50 mm deep 81 Pycnometer 82 Andreasen Pipette Stand 83 High Speed Stirrer New Model 84 Hydrometer, Range: 0.995 to 1 Measuring specific gravity of liquid against buoyancy. Used for particle size analysis of fine grain soil less than 75-micron size 85 Plummet Balance 86 Unconfined Compression Tester for load measurement 87 Digital Direct Shear Test Apparatus, 2kN 88 Compaction Test Apparatus, Manual -Light Compaction made of Mild Steel 89 Compaction Test Apparatus, Manual-Heavy Compaction made of Mild Steel 90 Universal Automatic Compactor with Mild Steel compaction mould 91 Relative Density Apparatus 92 Soil Permeability Apparatus 93 Overhead Tank, made of steel, approx., 37.5cm dia x 1m high 94 Grooved M.S. Plate, 30cm x 30cm square x 25mm thicks + Plate bearing Apparatus with Load Truss of 500kN 95 (Plate Bearing Apparatus) 96 Core Cutter 97 Triaxial Shear Test Apparatus 98 Sand Replacement Method Apparatus 99 Van Shear apparatus 100 Electronic Three Gang Bench Type Consolidometer Front Loading 101 Hot Air Oven 102 Sieve shaker (Motorized) 103 Field CBR Test Apparatus with Proving Ring and Dial Gauge 104 BOD Incubator 105 Turbidity Meter 106 pH Meter 107 Conductivity meter 108 Portable UV Visible Spectrophotometer 109 Dissolved Oxygen meter 110 Portable COD meter 111 TSS analyser 112 TDS Analyzers 113 Particulate Matter Sampler 114 Hot Air Oven 115 Muffle Furnace 116 Digital Colony Counter 117 Water bath 118 Open Reflux COD Digester 119 Electronic Weighing Balance 120 Electronic Weighing Balance 121 Infrared thermometer 122 Microscope 123 Magnetic Stirrer with hot plate 124 Jar Test Apparatus Flocculator 125 Test tube 126 BOD Bottle 127 Porcelain dish 128 Measuring cylinder 129 Filter Paper 130 Burette 131 Burette stand with rod, clamp & boss head 132 Needle Vibrator 133 Vibratory hammer 134 Concrete specimen cutter 135 Curing Tank 136 Accelerated Curing Tank 137 Compressor with Nozzle 138 Deep Refrigerator 139 Refrigerator 1 Thickness Gauge 2 Length Gauge 3 Aggregate Impact Tester 4 Crushing Value Apparatus 5 Los Angeles Abrasion testing machine with counter 6 Density Basket 7 Buoyancy Balance 8 Universal Penetrometer 9 Penetration Cone 10 Bitumen Penetration Kit 11 Ring and Ball Apparatus 12 Thermometer IP 60C 13 Thermometer IP 61C 14 Thermometer IP 8C, Range 0°C to 45°C 15 Thermometer IP 9C, Range 40°C to 85°C 16 Thermometer IP 10C, Range 76°C to 122°C 17 Cannon Manning cum Cannon Fenske Viscometer bath with Vacuum Pump 18 Cannon Manning Vacuum Viscometer Tube, Size 6 19 Cannon Manning Vacuum Viscometer Tube, Size 7 20 Cannon Manning Vacuum Viscometer Tube, Size 12 21 Cannon Manning Vacuum Viscometer Tube, Size 13 22 Thin Film Oven/Loss on Heating Oven 23 Rolling Thin Film Oven 24 Flash Point (Closed) Pensky-Martens Apparatus 25 Thermometer IP 15C Range 5°C to +110°C 26 Thermometer IP 16C Range 90°C to +370°C 27 Flash Point (Open) and Fire Point, PenskyMartens Apparatus 28 Thermometer IP 15C Range 5°C to +110°C 29 Thermometer IP 16C Range 90°C to +370°C 30 Specific Gravity Bottle 31 Ductility Testing Machine with Digital Temperature Indicator 32 Centrifuge Extractor with NABL Calibration Certificate. 33 Marshall Apparatus, 50kN Single Speed 4 Diameter Sample 34 Pavement Core Drilling Machine 35 Diamond Core Bit 36 Asphalt Mixer, 5 L Capacity 37 Skid Resistance Tester 38 Asphalt Mixer Theoretical Density Meter 39 Modified Roughness Indicating Machine (MERLIN) 40 Bump Integrator with pre-set facility and CRRI calibration certificate 41 Pavement Dynamic Cone Penetrometer 42 Film Stripping Device 43 Saybolt Viscometer 44 Mastic Asphalt Tester 45 Serological Water Bath, Double Walled, with Digital Controller Cum Indicator and Stirring Arrangement 46 Brookfiled Viscometer 47 Thin Film Oven 48 Ignition Oven Asphalt Content Tester with IRC Accreditation. 49 Marshal Automatic Compactor 50 Roughometer (wireless) 51 Radar Gun 52 Helium Pycnometer 53 Laboratory Hot Plate 54 Sieve shaker (Motorized) 55 Sieve shaker (Motorized) 1 SCHMIDT Live N 2 Rebound Hammer Sensor Kit (For Rock) Ultrasonic Pulse Velocity 4 Profometer Rebar Detection & Cover Meter with 5 yrs. software subscription 5 Diamond Core Drilling Machine for Concrete 7 Structure Scan Mini LXT for Concrete Scanning 8 Pile Integrity Test 9 PIT-W Professional Software 10 Impact Echo 11 Light Weight Deflect meter 12 Falling Weight Deflectometer 13 Non-nuclear density gauge (for Soil) 14 Non-Nuclear Asphalt Density Gauge 15 Resistivity Meter (1-D) 16 Electrical Resistivity Imaging system & IP-System 17 Single channel & Multichannel Seismograph 18 Ground penetrating Radar (GPR) 19 Microtremor (Passive Seismic monitoring 20 Pneumatic Adhesion Tensile Strength Testing Instrument (PATTI 21 Electronic Weighing Balance with Legal Metrology Test Certificate. 22 Electronic Weighing Balance with Legal Metrology Test Certificate.
Contract Date: May 05, 2026 Contract Value : ₹ 7.71 Crore
Government Departments No of Bidders 1
Assam View Result →
9.
Educational and Research Institute #10908628 AOC
Notice Inviting E-Tender For Laboratory Setup For Vtcs Of Jhargram And Paschim Medinipur Districts Including Supply, Installation And Commissioning Of Tools/Equipment/Instruments Etc. For Implementation Of Vocational Education In West Bengal- 1 Hot air oven 2 Seed drill 3 Sealing machine 4 Soil Auger 5 BOD incubator 6 Sowing machine 7 Soil testing kit 8 Sprayer 9 Compound Microscope 10 Pressure cooker 11 Wheel hoe 12 EC meter 13 Measuring tape 14 Sleeve trier/Nobbe trier 15 Heater 16 Hose pipe 17 Spade 18 Hand leveller 19 Watering can 20 Moisture box 21 Sickle 22 Sickle 23 Grinding machine 24 Germinator 25 Four stroke petrol engine with CNG setup- working condition 26 Power tiller 27 Diesel Engine – CRDI - 4 stroke for Dismantling and Assembling with Swiveling Stand. 28 Riffle type divider 29 Model Tractor 30 Processing / Oil extraction machine ( Soxhlet Apparatus) 31 Dibbler 32 Sprayer 33 General Balance 34 Soil testing kit 35 Foot Sprayer 36 Wheel hoe 37 Measuring tape 38 Pruning shear 39 Hose pipe 40 Heater 41 Forester’s shear 42 Hand fork 43 Spade 44 Hedge shear 45 Crow-bar 46 Grass shear 47 Hand leveler 48 Pruning saw 49 Axe 50 Hand cultivator 51 Drainage hoe 52 Pruning knife 53 Garden trowel 54 Watering can 55 Sickle 56 Digging fork 57 Garden hand rake 58 Kurpi-Varvari 59 Iron peg , Field board 60 Grinding machine ( turmeric powder and seed spices powder) 61 Aluminium oil extraction unit large ( for lemon grass & citronella) 62 Pouch sealing machine 63 Pilfer proof cap sealing machine 64 Hand refractometer 65 Weeder 66 Soil testing kit 67 Moisture meter 68 General Balance 69 Foot Sprayer 70 Salometer 71 Brix hydrometer 72 Electrically operated mixer cum grinder 73 Measuring tape 74 Knife Set 75 Heater 76 Hose pipe 77 Vegetable slicer, Potato slicer, Pineapple slicer 78 Spade 79 Hand leveler 80 Axe (Local made) 81 Pruning Secateur 82 Watering can 83 Fruit Tree Picking Pole with Basket 84 Sickle 85 Pulper 86 Cabinet dryer 87 Crusher 88 Autoclave (Laboratory type) 89 Spiral or screw type juice extractor. 90 Can sealer or double seamer 91 Water distillation unit 92 Wheelbarrow 93 Can vacuum testing gauge 94 Hand operated metal grinder 95 Washing machine 96 AC Motor Trainer Kit 97 Mixer cum grinder 98 Soldering & De-soldering Station 99 Megger 100 Geyser 101 ½ HP Induction motor Three Phase 102 Wooden Panel board with following accessories 103 Electric Power Drill 104 Clamp On Meter 105 Vacuum cleaner 106 Multimeter 107 ¼ HP Induction motor Single Phase 108 TPIC with Neutral main switch 109 Hand Drill Machine Electric with Hammer Action 110 Single phase Energy meter 111 Sodium vapour lamp 112 Mercury vapour lamp 113 Steam iron automatic 114 Electric rice cooker 115 DOL starter 116 Adjustable wrench 117 Screw driver set 118 M.C.B 119 Bench Vice 120 Wooden Board for wiring 121 Insulated Combination Plier (Heavy Duty ) 122 DPIC main switch 123 Spanner set 124 Cable cutting pliers 125 Analog multi-meter 126 DOL starter 127 Cutting pliers 128 Tools maker vice 129 Soldering iron 130 Crimping tool(pliers) 131 Ring Spanner 132 Screw driver set 133 Precision set of screwdrivers 134 M.C.B 135 Adjustable wrench 136 Hacksaw frame adjustable 137 De-soldering pump electrical heated, manual operators 138 Insulated combination pliers 139 Insulated side cutting pliers 140 Insulated screw driver 141 Insulated Combination Plier (Heavy Duty ) 142 Earthing rod with chain, Fish Wire 143 Electric bell 144 File flat second cut 145 Distribution box 4-way 146 File flat bastard 147 Handsaw 450mm 148 Soldering Iron Changeable bits 149 Ball Pin Hammer 150 Spirit level 151 3-pin 16A wall socket, flush type 152 Plier-Flat Nose 153 File flat smooth 154 3-pin 16A wall socket, mounting type 155 Ceiling rose 6A, 250V 2plate 156 Chisel-Cold-Flat 157 Fuse 158 Hammer ball pen 159 Fan regulator 160 3-pin 6A wall socket, flush type 161 Continuity tester 162 Hacksaw with frame adjustable 163 Wooden saw 164 Combined LED or fluorescent tube 165 Fuse 166 Standard wire gauge 167 I.C.T.P. switch16A 400V 168 S.P. switch 6A, 250 V mounting type two-way 169 S.P. switch flush type two way 170 3-pin 6A wall socket ,mounting type 171 2-pin 6A wall socket, flush type 172 I.C.D.P. switch16A250V 173 I.C. cut out 16A, 250V 174 Intermediate switch 6A, 250V 175 2-pin 6A mounting type 176 S.P. switch 6A, 250V mounting type single way 177 Kit-kat fuse 178 Kit-kat fuse 179 S.P. switch flush type, single way 180 3-pin16A 250V plug 181 Bell-Push/switch 6A, 250V mounting type 182 HRC Fuse-16A 183 PVC Cu wire 184 Terminal plate 16A 250 V3-way 185 Bell-Push / switch 6A, 250V flush type 186 GI junction box-1,2,3&4way square type 187 Bakelite pendent-holder 188 3-pin 6A 250V plug 189 Toggle switch 6A 190 Neutral link 16a mps 191 GI conduit pipe 192 PVC Channel 193 PVC pipe coupling 194 PVC junction box-1,2,3 and 4 way 195 PVC bend 196 PVC Elbow 197 PVC Tee 198 GI conduit coupler & Inspection Coupler 199 GI Elbow & Inspection Elbow 200 Tees & Inspection Tee 201 PVC Casing for wiring 202 PVC conduit pipe 203 Solar Photo-voltaic Cell : Solar power generation 204 Storage Battery 205 Complete set up of Single crystalline silicon PV Cell 206 Pyranometer 207 Solar street lighting 208 Solar home lighting system with all necessary components for student demonstration 209 Data logger 210 Concentrated solar collector 211 Flat type solar collector 212 Solar cooker 213 PVC / XLPE low tension cable jointing kit 214 D.C shunt Motor 215 Three phase Energy meter 216 Voltage Stabilizer 217 Room Heater 218 4-point starter 219 Tools makers vice 220 Tubular box spanner 221 Magneto spanner set 222 LED lamp 223 Allenkey set (Hexagonal set of 9) 224 Insulator model a) Pin type 225 Insulator model b) Strain type 226 Insulator model c) Disc type 227 Round Nose pliers 100mm 228 Round Nose pliers 2no. of set 229 Connecting screwdriver 100mm 230 Steel rule graduated both in Metric and English Unit 300mm 231 Long Nose pliers8 232 Micrometer 233 Steel measuring tape 3 meters 234 Hammer ball pen 500 grams 235 Neon tester 500V 236 PVC cable & XLPE cable 4 core, 3 & ½ core in m 237 Iron connector-5A, 250V 238 Digital compression testing machine 239 Theodolite transit latest model with all accessories 240 Aggregate impact tester with cylindrical cup and measuring cylinder 241 Auto level latest model with all accessories 242 Hand GPS-latest version 243 Mortar cube vibrator 244 Aggregate Crushing Value Apparatus 245 Concrete mixer 246 Dumpy level 247 Manual bar bending machine of suitable size 248 Bulk density apparatus (Cylindrical measure for fine aggregate and coarse aggregate ) 249 Turbidity Test Kit 250 Power cutter of suitable size 251 Box sextant 252 Planimeter Digital 253 Plane table with stand, accessories & water proofing Cover 254 Weighing plateform digital 255 Vicat apparatus with plunger, needles and mould 256 Standard IS sand 257 Oven Small Size 258 Electronic balance 259 Tile cutter 260 Bar bending table 261 Drill and bit set 262 Ratchet rack : with post and clamp flat 5 drill 6 to 35 mm by 0.2 mm. 263 Mortar board : 2000x2000 264 Metal cross staff- box type 265 Telescopic alidade 266 Slump test apparatus with temping rod 267 Water testing kit – for ph value 268 Thickness and length gauges (Elongation and Flakiness Index) 269 Plumbers metal melting pot 270 Metal cross staff- open type 271 Ratchet pipe die : 15 mm to 32 mm 272 Tap and die set to cut BSP Thread 273 Height indicators 274 Metric chain : 30 m & 20 m 275 Prismatic compass with stand and all accessories 276 Chain pipe wrenches : 90 mm-650 mm 277 Engineers chain 278 Sieve for sand in adjustable stand : 1mm, 100cm x 60cm fixed in steel frame 279 Optical square 280 Mortar board : 2 mtx2 mt. 281 Slump Cone 282 IS Brass sieves - set 283 Stillson pattern pipe wrenches : 450 mm to take pipe up to 52 mm dia. 284 Pipe vice to grip pipes up to : 77mm 285 Drawing Board : 1000mmx700mm 286 Brushes for painting 287 Leveling st-4M 288 Ranging rod Steel-2M 289 Offset rod : 2M 290 Measuring cylinder : set of 100 ml., 500 m., 1000 ml. 291 Pick axe 292 Pyconometer for specific gravity 293 Pickaxe. 294 Le Chatelier Mould (for soundness test of cement) 295 Survey plotting scale : 8 scales with offset scale in box 296 Mason square : 30x60 cm 297 Tenon saw, dovetail saw 298 Le Chateliers flask (For specific gravity test of cement) 299 Monkey Plier (gas pliers) 300 Aluminum float 301 Tool caulking 302 Flat Smithy tong. 303 Saw plumber : 300mm 304 Stop watch Digital 305 Screw driver Set 306 Land measuring steel tape 30 Meter long 307 Brick hammer with handle 308 Crow bar : 30mm dia. 1.5 m long of mild steel 309 Cube mould : 150mm Size 310 Spanner monkey up to 50 mm 311 Stilson wrench : 200 & 350 mm 312 Land measuring plastic tape : 30 mt long 313 Shovel 314 Spade 315 Telescopic pipes / props 316 Mason plumb rule with spirit Level 317 Trowel : 25 cmx10cm 318 Plumb rule and Bob 319 Non porous plate 320 Graduated cylinder 321 Adjustable spanner : A375 322 Double face hammers 323 Hacksaw frame adjustable : 250 to 300 mm 324 Level spirit wooden : 300mm 325 M.S pan : 45CM Dia. 326 Bucket G.i. : 35 CM Dia. 327 Sprit level : 30cm long 328 Bolster 329 Bevel 330 Wooden mallet 331 Gauging trowel 332 Sampling scoops : 2kg and 5 kg 333 Plumbers ladle 334 Trowel 125 335 Farma of mild steel for measuring aggregate : Heaving volume 0.03472 cm 336 Masonry grinder 337 Cutter, pipe wheel type : 6 mm to 25 mm 338 Caliper outside : 150mm 339 Steel tapes : 5 Meter long 340 Hammer ball peen : 800gms. 341 Cutting pliers 342 Inside caliper : 150mm 343 pointing Trowel : 6 344 Steel float 345 Measuring tape : 15 Meter long (Steel) 346 Bar bending lever (suitable diameter and length) : In m 347 Float wooden 348 Chisel : different sizes 349 Plumb bob : 50gms. 350 Bending pipes (suitable diameter and length) : In M 351 Line pin corner block 352 Wire brushes 353 Bending pipes : suitable dia& length in m 354 Total station latest model with all accessories 355 DGPS-latest version 356 Motorised sieve shaker 357 Floor polishing machine 358 Concrete vibrator : pin type & plate type 359 Electric drilling machine : 6 to 35 mm by 0.2 mm. for drilling 360 Power operated cutting machine 361 Vibrating machine : 12000 ± 400 rpm 362 Portable hand bender of suitable size 363 Spray painting machine 364 Drums : 200 liters capacity 365 Polishing machine 366 Abney level 367 Electric heater 368 Computing scales five hectares 369 Gunters chain 370 Offset scale for cadastral survey 371 Computing scales two hectares 372 Indian pattern clinometers 373 Telescopic/ adjustable spans 374 Straight edge 375 Steel / plywood shuttering plates 376 Hammer 5 kg 377 Water tube : 6m 378 Hammer 1 kg 379 Magnifying glass 380 Marking rope & thread : 15m 381 Chisel cold flat : 20 x 250 mm 382 File flat rough : 300mm 383 Four stroke petrol engine with CNG setup-working Condition 384 Diesel Engine – CRDI - 4 stroke for Dismantling and Assembling with Swiveling Stand. 385 Disk brake in working condition with caliper assembly with all parts 386 Drum brake assembly in Working Condition 387 Cut section working model of automatic transmission Gear box 388 Radiator cut section-cross flow 389 Cut section working model of Single plate clutch Assembly 390 Cut section of cross ply and radial tyres 391 Tyre pressure gauge with holding nipple 392 Vernier caliper : 0-300 mm with least count 0.02mm 393 Different type of piston model : 3 Different Types on board 394 Spanner, ring set of 12 : 6 to 32 mm. (metric) 395 Philips Screw Driver set of 5 pieces : 100 mm to 300 mm 396 Fuel feed pump for Diesel : Hand operated Plunger Type 397 Piston ring compressor 398 Piston Ring expander and remover. 399 Outside micrometer : 0-25mm 400 Automotive oil pump for dismantling and assembling 401 Valve Lifter 402 Carburetor – Solex : Solex for dismantling and assembling 403 Caliper inside with spring : 15cm 404 Calipers outside with spring : 15cm 405 Pliers combination : 20cm 406 Gasket Cutter : 5-35mm 407 Circlip pliers Expanding and contracting : 15cm 408 Dividers with spring : 15cm 409 Hammer Ball Peen : 0.75kg 410 Hammer Mallet 411 Hammer Plastic 412 Feeler gauge 20 blades (metric) 413 Hydraulic jack HI-LIFT type : 3 Ton Capacity 414 Two wheeler (refurbished) 415 Demonstration board of MPFI system : With injectors, rail, inlet manifold, throttle body, distributor, ECU, purge valve, sensor, crank pulley, fuel tank module. 416 Work bench : 250 x 120 x 60 cm with 4 vices 12cm Jaw 417 Torque wrenches set : 5-35 Nm, 12-68 Nm & 50-225 Nm 418 Battery –charger : Capable to charge batteries from 5AH – 150AH. 419 Battery –charger : Capable to charge batteries from 5AH – 150AH. 420 Spanners socket with speed handle, T-bar, ratchet and universal set of 28 pieces with box : up to 32 mm 421 Spanner D.E. set of 12 pieces : 6mm to 32mm 422 Steel tool box with lock and key (folding type) : 400x200x150 mm 423 Allen Key set of 12 pieces : 2mm to 14mm 424 Grease Gun 425 Electric Soldering Iron : 230 V 60 watts – 230 V 25 watts 426 Hacksaw frame adjustable : 20-30 cm 427 Hammer ball peen with handle : 0.5kg. 428 Electrician Screw Driver : 250mm 429 Flat File , second cut 25cm 430 File flat , bastard : 20cm 431 Hands file for Second cut flat : 20cm 432 Spanner, adjustable : 15cm 433 Scriber : 15cm 434 Test Jig box : PCB Jig Box, 220V, Dimension: 1.5x1x1 Feet 435 Different models of Water purifier, Microwave oven : set 436 Inverter set with stabilizer, battery charger, step down transformer : set. 437 Bonding machine 438 Different models of LED and LCD TV receiver 439 LCD Tester 440 SMD rework station 441 Soldering Station : Temp range: 200~480degC, Temp stability: +-2degC,Max power: 60W, Tip Compatibility: 900M Series, Inputvoltage: AC220V / 50 Hz 442 Battery tester : 2Ah-220Ah Internal Resistance Tester Accurate Digital Auto Battery Analyzer Digital Battery Tester 443 Bench power supply 444 Screwdriver set, tweezers, nose pliers, wire cutters etc. : in set. 445 PPM meter 446 Digital Multimeter (Black 2000 Counts) 447 SMD tester 448 Hot air gun 449 TDS meter 450 Soldering Iron : Soldering Iron 60W, Soldering Gun Solder Weld Welding Iron Tool 160-240 V 451 De soldering pump, 452 Dual CRO 30 MHz 453 Micro wave power meter 454 LED Magnifying Lamp, 220-240V 455 Electrical drill machine 456 BIOS programmer 457 Antistatic Mat (ESD Mat) : Electromark Esd Mat 6.5 X 2 Feet, Blue for static charge Dissipation 458 Hot air blower : 1500W Heat Gun cum Hot Air Blower with Dual Temperature Control 459 Back light Tester 460 Battery Booster : 12 volt dc adapter, 12V, Adapter, adaptor, battery booster 461 PTC heating element 462 Setter Hatcher Machine 463 Wt. Balance 464 Simple microscope 465 Chaff cutter 466 Vaccines as- RD, GD, IBD, Fowl Pox etc.Vaccinator, & First aid kit etc. 467 Rake, Fan, Litter material 468 Trevis/Crate 469 Milking machine 470 Sprayer 471 Poultry feeder, Drinker, water Heater 472 Postmortem set 473 Brooder, Brooder Guard & Hover 474 Mixer Grinder 475 veterinarians stethoscope 476 Thermometer 477 Haemometer 478 Setter Hatcher Machine 479 Aerator 480 Vaccines as- RD, GD, IBD, Fowl Pox etc. Vaccinator, & First aid kit etc.
Contract Date: Jan 16, 2026 Contract Value : ₹ 1.02 Crore
Government Departments No of Bidders 6
West Bengal View Result →
10.
Road Transport and Highways #10808200 Price Bid
Open Tender Document For E-Procurement Of Laboratory Equipment (Soil, Aggregates, Cement, Reinforcing Bar, Concrete Test Equipment, Water, Geo-Textile And Geogrid) For Material Testing Laboratory Of Iahe Open Tender Document For E-Procurement Of Laboratory Equipment (Soil, Aggregates, Cement, Reinforcing Bar, Concrete Test Equipment, Water, Geo-Textile And Geogrid) For Material Testing Laboratory Of Iahe , Soil , Unconfined Compressive Strength Compression Device With Digital Load Frame: Hydraulic Proving Ring, Dial Gauge Vernier Callipers, Timer, Oven, Weighing Balance , Shear Strength Vane Shear Apparatus , Grain Size Analysis As Per Is:2720 (Part- Iv) Pipette Apparatus (I) Sampling Pipette (Ii) Glass Sedimentation Tubes (Iii) Weighing Bottles (Iv) Deleted (V) Stirring Apparatus (Vi) Sieves -2Mm, 425Umm , 75Umm Is Sieves (Vii) Deleted , Specific Gravity Hydrometer Apparatus: Two 1000 Ml Graduated Cylinders, Dispersing Agent Solution Containing Sodiumhexa-Metaphosphate, Dessicator And Centimetre Scale. , Shrinkage Limit Test Full Set Of Equipments 1.) Evaporating Dish Of Porcelain, 2.) Spatula And Straight Edge, 3.) Balance-Sensitive To 0.01 G Minimum.4.) Shrinkage Dish. Circular, Porcelain Or Non-Corroding Metal Dish, 5.) Glass Cup. 50-55 Mm In Diameter And 25 Mm In Height,6.) Glass Plates. Two, 75X75 Mm One Plate Of Plain Glass And The Other Prongs, 7.) Thermostatically Controlled Oven,8.) Wash Bottle Containing Distilled Water, 9.) Graduate-Glass, With Capacity Of 25 Ml. 10.) Mercury. , Sand Equivalent Value (I) Graduated Cylinder (Ii) Irrigator Tube (Iii) Siphon Assembly (Iv) Weighted Foot Assembly (V) Measuring Can (Vi) Sieve -4.75Mm (Vii) Funnel (Viii) 4- Litre Bottle (Ix) Flat Pan (X) Timing Device (Xi) Sand Equivalent Shaker , Ph Test -Electronic Method (I) Ph Meter (Ii) Digital Balance 300 Gm Capacity-Sensitive 0.001Gm (Iii) 100Ml Glass Beaker -3Nos. (Iv) Volumetric Flask-500Ml -Nos. (V) Wash Bottle-100 Ml (Vi) Mortar With Rubber Covered Pestle , Aggregates , Polished Stone Value (I) Accelerated Polish Machine Mounted On Firm ,Level And Non Resilient Base Of Stone Or Concrete (Ii) Road Wheel (Iii) Means For Rotating Road Wheel (Iv) Means For Bringing The Surface Of A Rubber-Tyred Wheel Of 20 Cm Diameter And 5 Cm Breadth To Bear On The Stone Surface Of The Road Wheel With A Total Load Of 40 Kg. (V) Means To Feed The Sandand Water At A Uniform Rate(Vi ) Means To Feed The Emery Powderand Water At Uniform Rate (Vii) Friction Tester: Is: 2386 Part 4 As Perspecification Of Rrl Uk (Viii) 25 Kg Hard Siliceous Sand (Ix) Emery Powder 5 Kg , Alkali Aggregate Reactivity Mortar Bar Method:Scales, Weights, Sieves, Glass Graduates, Specimen Moulds, Mixing Bowl, Tamper, Trowel, Containers, Length Comparator , Alkali Aggregate Reactivity Chemical Method: 1. Electronic Balance 2. Pulveriser 3. Reaction Container, Reagents, Glassware , Petrographic Examination 1. Geological Hammer 2. Petrographic Microscope 3. Screen Confirming To Is Sieve 4. Digital Balance 5. Portable Handheld Cutting Machine 6. Hand Lens 7. Glass Sides Etc. , Deleterious Material & Organic Impurities Sedimentation Pipette: A Watertight Screw-Topped Glass Jar,1000 Ml Measuring Cylinder, Chemicals, Containers, Sieves , Cement , Soundness (Autoclave Apparatus) Graduated Glass Cylinders, Moulds, Autoclave, Length Comparator , Compaction (Mortar Cube Vibrator) , Fineness (Blaine Air Permeability Apparatus) , Ph Meter ( 2 In Nos.) , Reinforcing Bar (Steel) , Reinforcing Bar (Steel) Universal Testing Machine, To Determine Unit Weight, Yield Strength,, Proof Stress, Ultimate Tensile Strength, % Elongation, Bend And Re-Bend Test , Concrete Test Equipment , Vibrating Table 1Mx1m (Full Set Of Equipments) , Needle Vibrator ( 2 In Nos.) , Permeability , Dry Shrinkage(Shrinkage Apparatus) ( 2 In Nos.) (Full Set Of Equipments) , Air Content (Air Entrainment Meter Apparatus) (Full Set Of Equipments) , Durability (Rapid Chloride Ion Permissibility Apparatus) , Depth Of Penetration (Water Permeability Apparatus) ( 2 In Nos.) (Full Set Of Equipments) , Water , Physical Analysis Of Water , Geo Textile And Geogrid , Pull-Out Resistance Of Geotextile /Geogrid
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
11.
Rural Development #10658531 Price Bid
Providing Various Machinery And Material And Different Labour Services For Internalroad Development At Grampanchayatakole-Mulashi(Fund) , Providing And Supplying Material And Machinery , 40/60 Mm Metal , 53Grade Cement , 20Mm Metal , Crush Sand , Mrum , Pcc M-10 , Concrete M-20 , 600Mm Dia Pipe , Tremix Treatment 100 Mm Thick , Bricks , Steel , Tanker For Water , Jcb , Crane , Road Roller , Concrete Mixer , Breaker , Dumper , Tractor , Tractor Breaker , Black Smith With Tools - Ii Class , Stone Cutter With Tools - Semi Skilled , Mason I Class Skilled , Mason Ii Class Skilled , Carpenter I Class Skilled , Carpenter Ii Class Skilled , Plumber With Tools - Skilled , Glazier With Tools - Skilled , Tin Smith With Tools - Semi Skilled , Painter I Class Skilled , Painter Ii Class Skilled , Head Fitter With Tools - Skilled , Mechanic , Lorry Driver / Mixer Operator , Welder / Driller - Skilled , Polishman - Semi Skilled , Assistant Plumber - Skilled , Maistry Skilled / Supervisor / Mate , Vibrator Operator - Skilled , Skilled Labour , Boreman Skilled , Asphalt Sprayer Skilled , Minor Or Blaster Semi Skilled , Quarry Man - Semi Skilled , Painter / White Washer - Semi Skilled , Labour For Excavation In Hard Rock (Un Blast) , Tile Turner Semi Skilled , Mazdoor - For Polishing , Bar Bender Skilled , Bhisti (Mixing / Curing) - Semi Skilled , Mukadam - Semi Skilled , Tar Handler - Semi Skilled , Helper Un Skilled , Tree Cutter - Semi Skilled , Navaghani , Mazdoor - Unskilled Heavy Male , Mazdoor - Unskilled Heavy Female , Below Boy , Fitter With Tools I Class Skilled , Fitter With Tools Ii Class Skilled , Gun Man For Guniting , Laboratory Assistant , Labour For Tile Turning , Excavator - Unskilled Heavy , Breaker - Semi Skilled , Hole Driller Semi Skilled , Chiseler Semi Skilled , Foreman Skilled , Bandhani Semi Skilled , Emgraver For Lettering Skilled , Frabi - Weld - Drilling , Khalashi / Diers , Jack Hammer Operator , Electrician , Welder Skilled , Labour For Traffic Regulation , Watchman , Compressor Operator / Driver , Supervisor / Mate , Blacksmith (1St Class) Welder / Plumber / Electrician. , Blaster (Stone Cutter) , Mali , Mazdoor / Dresser (Semi Skilled) , Mazdoor / Dresser Sinker B116 Skilled , Medical Officer , Operator (Grouting) , Para Medical Personnel , Mazdoor Unskilled Female (Light) , Painting Lettering Number , Junior Engineer , Surveyor , Autocad Operator , Attendent , Computer Typist , Tracer , Total Station Operator , Senior Engineer , Assistant , Operator / Fitter , Mazdoor Unskilled Light Male , Computer Operator , Survey Helper , Technician , Skilled Assistants-On The Site , Supervisor , Valuation Expert , Office Support Staff , Co-Ordinator , Senior Surveyor , Revenue Expert , Welder
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
12.
Rural Development #10583263 Price Bid
Providing Supplying And Erecting Various Material And Machinery And Labour Services For Fhtc At Grampanchayatmanerwadi-Haweli-2 40 / 60 Mm Metal 3 53Grade Cement 4 20Mm Metal 5 Crush Sand 6 Mrum 7 Pcc M-10 8 Pvc Coated Gi Wire 9 G.I. Pipe 15Mm Dia. Medium Type 10 G.I. Pipe 15Mm Dia. Heavy Type 11 G.I. Pipe 20Mm Dia. Medium Type 12 G.I. Pipe 20Mm Dia.Heavy Type 13 G.I. Pipe 25Mm Dia. Medium Type 14 G.I. Pipe 25Mm Dia. Heavy Type 15 G.I. Pipe 32Mm Dia. Medium Type 16 G.I. Pipe 32Mm Dia.Heavy Type 17 G.I. Pipe 40Mm Dia. Medium Type 18 G.I. Pipe 40Mm Dia. Heavy Type 19 G.I. Pipe 50Mm Dia. Medium Type 20 G.I. Pipe 50Mm Dia. Heavy Type 21 G.I. Pipe 65Mm Dia. Medium Type 22 G.I. Pipe 65Mm Dia. Heavy Type 23 G.I. Pipe 80Mm Dia. Medium Type 24 G.I. Pipe 80Mm Dia. Heavy Type 25 Pvc Nahani Trap 75 Mm 26 G.I.Clamps 100Mm To 150Mm 27 Pvc Nahani Trap 150 Mm 28 G.I.Clamps 12Mm To 32Mm 29 G.I.Clamps 40Mm To 80Mm 30 Anglo Indian W.C. Pan Colour 31 G.I.Fixtures 32 P.V.C. Cowl 100 Mm 33 G.I.Screws 30Mm 34 G.I.Screws 40Mm 35 G.I.Union 25Mm Dia. 36 Gully Trap Cover With Frame 37 Gun Metal Stop Tap With Crutch Wheel 20Mm 38 Gun Metal Stop Tap With Crutch Wheel 25Mm 39 Gun Metal Stop Tap With Crutch Wheel 15Mm 40 Gun Metal Stop Tap With Crutch Wheel 20Mm 41 C.I.Bend 75Mm Dia. 42 C.I.Bend 100Mm Dia. 43 C.I.Bip Tap 12Mm 44 C.I.Grating 150Mm Dia. 45 C.I.Grating 100Mm Dia. 46 C.I.Grating 75Mm Dia. 47 C.I.Brackets 48 C.I.Collers 100Mm Dia. 49 C.I.Copllers 75Mm Dia. 50 C.I.Cover 45*30 Cm With Frame 51 C.I.Cowl / Vent 100Mm Dia. 52 C.I.Cowl / Vent 150Mm Dia. 53 C.I.Cowl / Vent 75Mm Dia. 54 C.I.Hinged Cover With Frame 55 C.I.Man Hole Cover 50 Kg. 56 C.I.Man Hole Cover 75 Kg. 57 C.I.Man Hole Cover 100 Kg. 58 C.I.Man Hole Cover 175 Kg.Heavy ( 0.9*0.45M ) 59 C.I.Nahani Trap 100Mm Dia. ( 375Mm Long ) 60 C.I.Nahani Trap 75 To 80Mm Dia. ( 375Mm Long ) 61 C.I.100*75*300 Long Arm ( Wt. 6Kg ) Nahani Trap 62 C.I.Soil Pipe 100Mm Dia. 63 C.I.Soil Pipe 150Mm Dia. 64 C.I, Soil Pipe 75 To 80Mm Dia. 65 C.I.Shoe 75 Mm Dia. 66 C.I. Shoe 100 Mm Dia. 67 C.I.Shoe 150Mm 68 Ball Cock 15Mm Dia.P.V.C.Float 69 Ball Cock 25Mm Dia.P.V.C.Float 70 Ball Cock 40Mm Dia.P.V.C.Float 71 Ball Cock 50Mm Dia.P.V.C.Float 72 Bib Cock Stop Tap Brass Heavy 15Mm 73 Bib Cock Stop Tap Brass Heavy 20Mm 74 Bib Cockstop Tap Brass Heavy 25Mm 75 Bib Tap 12Mm Brass Medium 76 Colour Wash Hand Basin 55*40Cm 77 Colour Wash Hand Basin 63*45Cm 78 White Glazed Wash Basin 45*30Cm 79 White Glazed Wash Hand Basin 55*50Cm 80 P.V.C. Flexible Waste Pipe 32 Mm Dia 81 White Glazed Wash Hand Basin 63 X 45 Cm 82 Sink White Glazed 45*20*30Cm 83 Pedestal For Wash Basin ( Standard Size ) 84 C.C.Septic Tank 0.9M Dia. ( 2.5M Long ) 85 C.C.Septic Tank 1.20M Dia. ( 2.5M Long ) 86 C.I.Steps For Manhole 87 C.I.Cover With Frame ( Gully Trap ) 88 C.I.Plug Bend 150Mm Dia. 89 Clamp For G.I.Pipe 25Mm 90 Colour European Type W.C.Pan 91 European Type Glazed W.C.Pan 92 W.C.Pan Coloured Glazed 64Cm. ( Orissa ) 93 W.C.Pan White Glazed 58 Cm.Indian 94 W.C.Pan White Glazed 57.50 Cm ( Orissa ) 95 Fibre Flushing Tank For W.C. 96 Flushing Tank Automatic Urinal 10Ltr. C.I. 97 Flushing Tank Automatic Urinal 5Ltr. ( P.V.C. ) 98 Low Level Flush Pr. St. 10Ltr. 99 Flat Back Urinal 100 Stall Type Urinal 101 Lipped Type Urinal 102 Coloured Glazed Full Stall Urinal 103 Bleaching Powder 104 Potassium Permanganate 105 Nylon Brush 106 Duster 107 Plastic Bucket 108 Coir 109 Gunny Cloth 110 Kharata 111 Wheel Stop Tap Brass 15Mm 112 Wheel Stop Tap Brass 20Mm 113 Wheel Stop Tap Brass 25Mm 114 Socket Brass For 32Mm Tap 115 Socket Brass For 40Mm Tap 116 Socket Brass For 50Mm Tap 117 Socket Brass For 65Mm Tap 118 Socket For 100Mm Tap 119 Socket For 15Mm Tap 120 Socket For 20Mm Tap 121 Socket For 25Mm Tap 122 Socket For 32Mm Tap 123 Socket For 40Mm Tap 124 Socket For 50Mm Tap 125 Socket For 65Mm Tap 126 Socket For 80Mm Tap 127 Span Yarn 128 Strainer For 100Mm 129 Strainer For 40Mm 130 Strainer For 50Mm 131 Strainer For 80Mm 132 Strainer For 15Mm 133 Strainer For 20Mm 134 Strainer For 25Mm 135 Stone Ware Pipe 100Mm Dia. 136 Stone Ware Pipe 150Mm Dia. 137 Stone Ware Pipe 225Mm Dia. 138 Stone Ware Glazed Pipe Half Round 100Mm Dia. 139 Stop Tap Brass With Crunch Wheel 15Mm Dia. 140 Towel Rod With Clamps 16Mm Dia. 141 Mirror 40*50Cm. With Plastic Frame 142 Brass T Thimble Socket 32Mm Dia. 143 Brass Wheel Stop Tap 32Mm Dia. 144 Brass Wheel Stop Tap 40Mm Dia. 145 Brass Wheel Stop Tap 50Mm Dia. 146 Brass Wheel Stop Tap 65Mm Dia. 147 Brass Wheel Stop Tap 80Mm Dia. 148 Half Turn Flush Cock 25Mm Dia. 149 12Mm Flexible Inlet Pipe Connection 150 Bell Mouth Cover 100Mm Dia. 151 Box Chamber With Lock 0.6*0.45M 152 Brass Nozzle Pillar Tap 12Mm 153 Black Bakelite Seat To European Closer 154 Concussion Push Button Type Gun Metal Tap 15 To 25Mm Dia. 155 Coupling Cast Iron 100Mm Dia. 156 Coupling Cast Iron 80Mm Dia. 157 Chromium Plated 12Mm Dia.Bib Cock 158 C.I.Trap Grating 15*10 Cm 159 C.I.Y Junction 100Mm Dia. 160 C.I.Y Junction 150Mm Dia. 161 C.I.Y Junction 75Mm Dia. 162 Enameled Bend 40Mm Dia. 163 Ferrul For C.I.Pipr 100Mm 164 White Glazed Foot Rest Chequred 25*10 Cm 165 Half Round Earthware Pipe 100Mm ( 60Cm Long ) 166 Half Round Earthware Pipe 150Mm ( 60Cm Long ) 167 Jute Rope 168 Half Round Chaina Ware Pipe 100Mm ( 60Cm Long ) 169 Lead Pipe 32Mm Dia. 170 Mohagani Seat With Lid 171 Mosquito Proof Coupling 172 Non-Return Valve 15Mm For Water Meter 173 Non-Return Valve 25Mm For Water Meter 174 Non-Return Valve 20Mm For Water Meter 175 Piller Tap 12Mm Dia.Chromium Plated Heavy 176 P.Trap And Lead Pipe Upto 40Mm Dia. 177 Rubber Gasket ( 25, 28 And 20 Cm ) 178 Rubber Incertion 179 Rubberised Adhesive 180 Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) 181 Self Project Tap Brass Chromium Plated 15Mm 182 Sewer Trap 183 Shower Rose Chromium Plated Brass 10Cm 184 P.V.C. Pipe 15Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 185 P.V.C. Pipe 20Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 186 P.V.C. Pipe 25Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 187 P.V.C. Pipe 32Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 188 P.V.C. Pipe 40Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 189 P.V.C. Pipe 50Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 190 P.V.C. Pipe 60Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 191 P.V.C. Pipe 75Mm Dia.4 Kg / Cm2 Pressure ( Class Ii ) 192 P.V.C. 75 Mm Soil Pipe 6 Kg / Cm2 Pressure 193 P.V.C. Pipe 90Mm Dia.4 Kg / Cm2 Pressure ( Class Ii ) 194 P.V.C.Pipe 110Mm Dia.4Kg / Cm2 Pressure ( Class Ii ) 195 P.V.C. 110 Mm Rain Water Pipe 6Kg / Cm2 Pressure 196 P.V.C. 110 Mm Soil Pipe 6 Kg / Cm2 Pressure 197 P.V.C.Pipe 140Mm Dia.4Kg / Cm2 Pressure ( Class Ii ) 198 P.V.C.Pipe 160Mm Dia.4Kg / Cm2 Pressure ( Class Ii ) 199 P.V.C.Pipe 160Mm Dia.Soil Pipe 200 P.V.C.Pipe 160Mm Dia. Rain Water Pipe 201 P.V.C.Socket 15Mm Dia. 202 P.V.C.Socket 20Mm Dia. 203 P.V.C.Socket 25Mm Dia. 204 P.V.C.Socket 32Mm Dia. 205 P.V.C.Socket 40Mm Dia. 206 P.V.C.Socket 50Mm Dia. 207 P.V.C.Socket 60Mm Dia. 208 P.V.C.Flushing Tank ( 12 Ltr. Capacity ) 209 Flush Valve 32Mm Dia. 210 Ferocret Tank 211 Stainless Steel Sink Of Size 600*510*200Mmof Nirali Or Equivalent Make 212 C.P.Pillar Cock Jaquar Make Continental ( Cat.No. Con-011 ) 213 C.P.Pillar Cock ( Isi ) Jaquar Make Continental 214 C.P.Pillar Cock Long Neck With Aerator Jaquar Make Continental ( Cat.No. Con- 021 ) 215 C.P.Bib Cock ( Isi ) Jaquar Make Continental ( Cat.No. Con-037 ) 216 C.P.Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) 217 C.P.2-Way Bib Cock Jaquar Make Continental ( Cat.No. Con-041 ) 218 C.P.Bib Cock With Wall Flange Long Thread Jaquar Make Continental ( Cat.No. Con- 047 ) 219 C.P.Bib Cock With Nozzle Jaquar Make Continental ( Cat.No. Con-049 ) 220 C.P.Angular Stop Cockjaquar Make Continental ( Cat.No. Con-053 ) 221 C.P.Angular Stop Cock Long Thread Jaquar Make Continental ( Cat.No. Con-055 ) 222 C.P.Angular Stop Cock With Wall Flange Jaquar Make Continental ( Cat.No. Con- 059 ) 223 C.P.Central Hole Basin Mixer Without Popup Waste System With 450Mm Long Braided Hoses Jaquar Make Continental ( Cat.No. Con-167B ) 224 C.P.Wall Mixer With Telephone Shower Arragnementonly But Without Teltphone Shower Crutch Jaquar Make Continental ( Cat.No. Con-217 ) 225 C.P.Wall Mixer Non-Telephonic Shower Arrangement Jaquar Make Continental ( Cat.No. Con-219 ) 226 C.P.Wall Mixer ( Wall Mounted Model ) With Telephone Shower Arrangement Only And With Telephone Shower Crutch Jaquar Make Continental ( Cat.No. Con-267 ) 227 C.P.Wall Mixer With Provision For Overheadshower With 115Mm Long Bend Pipe And Wall Flange Jaquar Make Continental ( Cat.No. Con-273Upr ) 228 C.P.Sink Mixer With Swinging Casted Spout ( Wallmounted ) Jaquar Make Continental ( Cat.No. Con-309 ) 229 C.P.Sink Mixer Swinging Spout ( Table Mounted Model ) 450Mm Long Braided Hoses Jaquar Make Continental ( Cat.No. Con-309B ) 230 C.P.Sink Cock With Swinging Casted Spout Jaquar Make Continental ( Cat.No. Con- 347 ) 231 C.P.Sink Cock With Raised J Shaped Swinging Casted Spout ( Table Mounted ) Jaquar Make Continental ( Cat.No. Con- 359 ) 232 C.P.Shower Arm 190Mm Long Light Body With Wallflange Jaquar Make Continental ( Cat. No. Sha - 477 ) 233 C.P.Flush Cock With Wall Flange 25Mm With Plain Knob Jaquar Make Continental ( Cat.No. Flr 6081 ) 234 C.P.Towel Rail 24 Jaquar Make Continental ( Cat. No. Acn 1111N ) 235 C.P.Towel Ring Square Jaquar Make Continental ( Cat. No. Acn 1121N ) 236 C.P.Soap Dish Hooker Jaquar Make Continental ( Cat. No. Akb 35731 ) 237 C.P.Soap Dish ( Polyurethane ) Jaquar Make Continental ( Cat. No. Aqn 7733 ) 238 C.P.Toilet Paper Holder Jaquar Make Continental ( Cat. No. Aq 7751 ) 239 C.P.Toilet Rack 24With Lower Hanger Jaquar Make Continental ( Cat. No. Acn 1181N ) 240 C.P.Handshower ( Health Faucet ) 1M.Pvc Tube With Wall Hook Jaquar Make ( Cat. No. Ald 563 ) 241 C.P.Pillar Cock Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7011 ) 242 C.P.Bib Cock With Wall Flange Aqua Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt7037 ) 243 C.P.2-Way Bib Cock With Wall Flange Aqua Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7041 ) 244 C.P.Angular Stop Cock With Wall Flange Aqua Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7053 ) 245 C.P.Central Hole Basin Mixer With Regular Spout Without Popup Waste System With 450Mm Longbraided Hoses Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7167Bb ) 246 C.P.Central Hole Basin Mixer With Regular Spout With Popup Waste System With 450Mm Longbraided Hoses Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7169B ) 247 C.P.Central Hole Basin Mixer With Small Spout Without Popup Waste System With 450Mm Longbraided Hoses Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7171B ) 248 C.P.Wall Mixer ( Wall Mounted Model ) With Telephonic Shower Arrangement Only But Without Crutchjaquar Make QueenS Collection ( Quarter Turn Filling ) ( Cat. No. Qqt 7217 ) 249 C.P.Wall Mixer Non-Telephonic Shower System Jaquar Make QueenS Collection ( Quarter Turn Filling ) ( Cat. No. Qqt 7219 ) 250 C.P.Wall Mixer ( Wall Mounted Model ) With Telephonic Shower Arrangement Only And With Telephone Shower Crutch Jaquar Make QueenS Collection ( Quarter Turn Filling ) ( Cat. No. Qqt 7267 ) 251 Hydraulic Door Closer 252 Cpvc Pipe 15Mm Dia. 253 Cpvc Pipe 20Mm Dia. 254 Cpvc Pipe 25Mm Dia. 255 Cpvc Pipe 32Mm Dia. 256 Cpvc Pipe 40Mm Dia. 257 Cpvc Pipe 50Mm Dia. 258 Cpvc Coupling For 15Mm Dia. 259 Cpvc Coupling For 20Mm Dia. 260 Cpvc Coupling For 25Mm Dia. 261 Cpvc Coupling For 32Mm Dia. 262 Cpvc Coupling For 40Mm Dia. 263 Cpvc Coupling For 50Mm Dia. 264 Elbow 90 Degree For 15Mm Dia. 265 Elbow 90 Degree For 20Mm Dia. 266 Elbow 90 Degree For 25Mm Dia. 267 Elbow 90 Degree For 32Mm Dia. 268 Elbow 90 Degree For 40Mm Dia. 269 Elbow 90 Degree For 50Mm Dia. 270 Tee For 15Mm Dia. 271 Tee For 20Mm Dia. 272 Tee For 25Mm Dia. 273 Tee For 32Mm Dia. 274 Tee For 40Mm Dia. 275 Tee For 50Mm Dia. 276 End Cap For 15Mm Dia. 277 End Cap For 20Mm Dia. 278 End Cap For 25Mm Dia. 279 End Cap For 32Mm Dia. 280 End Cap For 40Mm Dia. 281 End Cap For 50Mm Dia. 282 Ball Cock For 15Mm Dia. 283 Ball Cock For 12Mm Dia. 284 Ball Cock For 25Mm Dia. 285 Ball Cock For 32Mm Dia. 286 Ball Cock For 40Mm Dia. 287 Araldite Adhesive 288 Ball Valves For 50Mm Dia. 289 Male Adapter ( Brass Threads ) For 15Mm Dia. 290 Male Adapter ( Brass Threads ) For 20Mm Dia. 291 Male Adapter ( Brass Threads ) For 25Mm Dia. 292 Male Adapter ( Brass Threads ) For 32Mm Dia. 293 Male Adapter ( Brass Threads ) For 40Mm Dia. 294 Male Adapter ( Brass Threads ) For 50Mm Dia. 295 Male Adapter ( Plastic Threads ) For 15Mm Dia. 296 Male Adapter ( Plastic Threads ) For 20Mm Dia. 297 Male Adapter ( Plastic Threads ) For 25Mm Dia. 298 Male Adapter ( Plastic Threads ) For 32Mm Dia. 299 Male Adapter ( Plastic Threads ) For 40Mm Dia. 300 Male Adapter ( Plastic Threads ) For 50Mm Dia. 301 Female Adapter ( Brass Threads ) For 15Mm Dia. 302 Female Adapter ( Brass Threads ) For 20Mm Dia. 303 Female Adapter ( Brass Threads ) For 25Mm Dia. 304 Female Adapter ( Brass Threads ) For 32Mm Dia. 305 Female Adapter ( Brass Threads ) For 40Mm Dia. 306 Female Adapter ( Brass Threads ) For 50Mm Dia. 307 Female Adapter ( Plastic Threads ) For 15Mm Dia. 308 Female Adapter ( Plastic Threads ) For 20Mm Dia. 309 Female Adapter ( Plastic Threads ) For 25Mm Dia. 310 Union For 15Mm Dia. 311 Union For 20Mm Dia. 312 Union For 25Mm Dia. 313 Union For 32Mm Dia. 314 Union For 40Mm Dia. 315 Union For 50Mm Dia. 316 Cross For 15Mm Dia. 317 Cross For 20Mm Dia. 318 Step Over Bend 15Mm Dia. 319 Step Over Bend 20Mm Dia. 320 Tee Holder For 15Mm Dia. 321 Tee Holder For 32Mm Dia. 322 End Plug Threaded For 15Mm Dia. 323 R.C.C.Chamber Cover With Frame 90Cm*45Cm Heavy Duty 225Kg 324 R.C.C.Chamber Cover With Frame 90Cm*45Cm Medium Duty 140Kg 325 R.C.C.Chamber Cover With Frame 60Cm*45Cm Heavy Duty 160Kg 326 R.C.C.Chamber Cover With Frame 60Cm*45Cm Medium Duty 100Kg 327 I.S.I.Ferrul Connection15mm Dia. 328 I.S.I.Ferrul Connection 20Mm Dia. 329 I.S.I.Ferrul Connection 25Mm Dia. 330 I.S.I.Ferrul Connection 32Mm Dia. 331 I.S.I.Ferrul Connection 40Mm Dia. 332 I.S.I.Ferrul Connection 50Mm Dia. 333 Water Meter 15 Mm Diameter 334 Water Meter 20 Mm Diameter 335 Water Meter 25 Mm Diameter 336 Water Meter 40 Mm Diameter 337 Water Meter 50 Mm Diameter 338 Water Meter 80 Mm Diameter 339 Water Meter 100 Mm Diameter 340 Non Return Valve 40 Mm Diameter 341 Non Return Valve 50 Mm Diameter 342 Non Return Valve 80 Mm Diameter 343 Non Return Valve 100 Mm Diameter 344 Colour Wash Hand Basin 0.45 X 0.30 345 White Glaze Earth Sink 0.6 X 0.2 X 0.45 346 Clamp For G.I.Pipe 200Mm 347 Earopean Type Glazed W.C.Pan 68Cm 348 Earopean White Glazed Earthen Ware Closet Pan 349 P.V.C. Nahni Trap 350 P.V.C. Connector. 15 Mm Dia 351 Low Level Flushing Cistern 352 Upvc Sanitary Pipes All 20 Mm Dia. 353 Upvc Sanitary Pipes All 75 Mm Dia. 354 Bib Cock Stop Tap Brass Heavy 15Mm 355 Stainless Steel Sink Of Size 610 X 460 X 200 Mm Of Nirali Or Equivalent Make 356 Upvc Sanitary Pipes All 63 Mm Dia. 357 W.C.Pan Colour Glazed 57.50 Cm ( Orissa ) 358 Piller Cock Mixer & Angle Cock 359 Upvc Sanitary Pipes All 25 Mm Dia. 360 Upvc Sanitary Pipes All 15 Mm Dia. 361 Cement 362 Upvc Sanitary Pipes All 40 Mm Dia. 363 Upvc Sanitary Pipes All 50 Mm Dia. 364 Stainless Steel Sink Of Size 470 X 420 X 178 Mm Of Nirali Or Equivalent Make 365 Bib Cock Long Arm 366 Bottletrap Wash Basin 32 Mm Cromium Plated 367 Upvc Sanitary Pipes All 32 Mm Dia. 368 Hamp Rope 369 Bib Cock Cock Stop Tap Brass Heavy 15 Mm 370 Colour Wash Hand Basin 45*30Cm 371 Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap 372 Ultra 250 Mm.Dia. Upvccover & Frame 373 Upvc Blanking Plug 110 Mm 374 Upvc 90 Degree Bend 375 Ultra Shaft 250X470mm 376 Water Jet With Accessories 377 White Glazed Full Stall Urinal 378 Glass Plain 6Mm Thick 379 White Glazed Earthenware Squatting Plate ( Ladies Urinal ) 380 Autoclosing Pillar Cock Of Pressmatic Tap 381 Pvc Aqua Kraft Type Super Bib Tap 15 Mm 382 Pvc Aqua Kraft Type Super Two Way Bib Tap 15 Mm 383 Super Push Button Type Cock / Tap With Flange 15 Mm 384 Pvc Aqua Kraft Type Super Jet Spray 15 Mm 385 Pvc Aqua Kraft Type Super Right Angle Stop Tap 386 Pvc Aqua Kraft Type Super Pillar Tap 15 Mm 387 Fixing In Cc Bk Clamp, Battan 388 Wall Mounted European Type Glazed W.C.Pan 389 Super Wall Sink Type Tap With Flange 15 Mm 390 Two Way Bib Tap With Flange 391 Super Jet Spray With Flange 2 In 1 Faucet 1.50 Metre Long 392 Chloryphyriphos 393 Solvent 394 D.D.V.P. 395 Malathion 396 Pine Oil 397 S.S. Pipe 40 Mm Dia 398 Mild Steel 399 Barbed Wire 400 Concentina Coil Wire 401 M.S.Steel 402 Rcc Pole 403 Green Marble 404 Telephone Black Granite 405 Karva ( For Roof And Sides 10Kg Bundle ) 406 Tatti 407 Bamboo 25Mm Dia. 408 Lightening Conductor 409 Salt 410 Copper Tape Width 25Mm*3Mm Thick 411 Aluminium Strips 50 Mm X 3 Mm 412 Cripped Wire3 - 0 , 4 - 0 And 5 - 0 Wide 413 Welding Electrodes 414 Welded Mesh 75 X 75 Mm 415 Welded Mesh 150 X 150 Mm 416 Tarat 36 Width ( Gunny Cloth ) 417 Chain Link3 - 0 , 4 - 0 And 5 - 0 Wide 418 Bamboo 50Mm Dia. 419 Hold Fast For Steel Gate 420 Nut Boldts 12 Mm Dia. / Nails All Size 421 M.S. Pipe 40 Mm Dia 422 Welding Rod 423 Pvc Hand Rail Cover 424 Antitermite Liquid 425 Lock For Drawer / Cupboard 426 Glycel 427 Hing 428 Hot Lime 429 Ladder 430 Fine Tooth Chisel 431 Saw 432 Gloves 433 Tractor Breaker 434 Inforamtion Board 435 Labour Services Skilled Labour 436 Labour Services Unskilled Labour 437 Mechanic 438 Lorry Driver / Mixer Operator 439 Welder / Driller - Skilled 440 Polishman - Semi Skilled 441 Assistant Plumber - Skilled 442 Maistry Skilled / Supervisor / Mate 443 Vibrator Operator - Skilled 444 Skilled Labour 445 Labour For Excavation In Hard Rock ( Un Blast ) 446 Mazdoor - For Polishing 447 Bhisti ( Mixing / Curing ) - Semi Skilled 448 Mukadam - Semi Skilled 449 Helper Un Skilled 450 Mazdoor - Unskilled Heavy Male 451 Mazdoor - Unskilled Heavy Female 452 Laboratory Assistant 453 Labour For Tile Turning 454 Excavator - Unskilled Heavy 455 Breaker - Semi Skilled 456 Jack Hammer Operator 457 Electrician 458 Welder Skilled 459 Labour For Traffic Regulation 460 Watchman 461 Compressor Operator / Driver 462 Supervisor / Mate 463 Blacksmith ( 1St Class ) Welder / Plumber / Electrician. 464 Blaster ( Stone Cutter ) 465 Mali 466 Mazdoor / Dresser ( Semi Skilled ) 467 Mazdoor / Dresser Sinker B116 Skilled 468 Medical Officer 469 Operator ( Grouting ) 470 Para Medical Personnel 471 Mazdoor Unskilled Female ( Light ) 472 Junior Engineer 473 Surveyor 474 Autocad Operator 475 Attendent 476 Computer Typist 477 Tracer 478 Total Station Operator 479 Senior Engineer 480 Assistant 481 Operator / Fitter 482 Mazdoor Unskilled Light Male 483 Computer Operator 484 Survey Helper 485 Technician 486 Skilled Assistants-On The Site 487 Supervisor 488 Valuation Expert 489 Office Support Staff 490 Co-Ordinator 491 Senior Surveyor 492 Revenue Expert 493 Welder
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
13.
Rural Development #10583249 Price Bid
Providing Supplying And Erecting Various Different Machinery Material And Labour Services Rama 115 Ahire Khadewadi Marg 0 To 5 At Grampanchayatahire-Haweli ( Raste V Pul Surusti Gt B Zp ) -2 40 / 60 Mm Metal 3 53Grade Cement 4 20Mm Metal 5 Crush Sand 6 Mrum 7 Pcc M-10 8 Concrete M-20 9 Bricks 10 Tanker For Water 11 Jcb 12 Crane 13 Road Roller 14 Concrete Mixer 15 Breaker 16 Dumper 17 Tractor 18 Tractor Breaker 19 Inforamtion Board 20 Tractor Breaker 21 Labour Services Skilled Labour 22 Labour Services Unskilled Labour 23 Black Smith With Tools - Ii Class 24 Stone Cutter With Tools - Semi Skilled 25 Mason I Class Skilled 26 Mason Ii Class Skilled 27 Mechanic 28 Lorry Driver / Mixer Operator 29 Welder / Driller - Skilled 30 Maistry Skilled / Supervisor / Mate 31 Vibrator Operator - Skilled 32 Skilled Labour 33 Boreman Skilled 34 Asphalt Sprayer Skilled 35 Minor Or Blaster Semi Skilled 36 Quarry Man - Semi Skilled 37 Labour For Excavation In Hard Rock ( Un Blast ) 38 Bhisti ( Mixing / Curing ) - Semi Skilled 39 Mukadam - Semi Skilled 40 Tar Handler - Semi Skilled 41 Helper Un Skilled 42 Mazdoor - Unskilled Heavy Male 43 Mazdoor - Unskilled Heavy Female 44 Below Boy 45 Laboratory Assistant 46 Labour For Tile Turning 47 Excavator - Unskilled Heavy 48 Breaker - Semi Skilled 49 Chiseler Semi Skilled 50 Foreman Skilled 51 Jack Hammer Operator 52 Labour For Traffic Regulation 53 Watchman 54 Compressor Operator / Driver 55 Supervisor / Mate 56 Mali 57 Medical Officer 58 Operator ( Grouting ) 59 Junior Engineer 60 Surveyor 61 Autocad Operator 62 Attendent 63 Computer Typist 64 Tracer 65 Total Station Operator 66 Senior Engineer 67 Assistant 68 Operator / Fitter 69 Mazdoor Unskilled Light Male 70 Computer Operator 71 Survey Helper 72 Technician 73 Skilled Assistants-On The Site 74 Supervisor 75 Valuation Expert 76 Office Support Staff 77 Co-Ordinator 78 Senior Surveyor 79 Revenue Expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
14.
Rural Development #10583248 Price Bid
Providing Supplying And Erecting Various Different Machinery Material At Labour Services Gram 404 To Sonarwadi 0 To 2 Gram 405 At Grampanchayatahire-Haweli ( Raste V Pul Durusti Gt B Zp ) -2 40 / 60 Mm Metal 3 53Grade Cement 4 20Mm Metal 5 Crush Sand 6 Mrum 7 Pcc M-10 8 Concrete M-20 9 Bricks 10 Tanker For Water 11 Jcb 12 Crane 13 Road Roller 14 Concrete Mixer 15 Breaker 16 Dumper 17 Tractor 18 Tractor Breaker 19 Inforamtion Board 20 Tractor Breaker 21 Labour Services Skilled Labour 22 Labour Services Unskilled Labour 23 Black Smith With Tools - Ii Class 24 Stone Cutter With Tools - Semi Skilled 25 Mason I Class Skilled 26 Mason Ii Class Skilled 27 Mechanic 28 Lorry Driver / Mixer Operator 29 Welder / Driller - Skilled 30 Maistry Skilled / Supervisor / Mate 31 Vibrator Operator - Skilled 32 Skilled Labour 33 Boreman Skilled 34 Asphalt Sprayer Skilled 35 Minor Or Blaster Semi Skilled 36 Quarry Man - Semi Skilled 37 Labour For Excavation In Hard Rock ( Un Blast ) 38 Bhisti ( Mixing / Curing ) - Semi Skilled 39 Mukadam - Semi Skilled 40 Tar Handler - Semi Skilled 41 Helper Un Skilled 42 Mazdoor - Unskilled Heavy Male 43 Mazdoor - Unskilled Heavy Female 44 Below Boy 45 Laboratory Assistant 46 Labour For Tile Turning 47 Excavator - Unskilled Heavy 48 Breaker - Semi Skilled 49 Chiseler Semi Skilled 50 Foreman Skilled 51 Jack Hammer Operator 52 Labour For Traffic Regulation 53 Watchman 54 Compressor Operator / Driver 55 Supervisor / Mate 56 Mali 57 Medical Officer 58 Operator ( Grouting ) 59 Junior Engineer 60 Surveyor 61 Autocad Operator 62 Attendent 63 Computer Typist 64 Tracer 65 Total Station Operator 66 Senior Engineer 67 Assistant 68 Operator / Fitter 69 Mazdoor Unskilled Light Male 70 Computer Operator 71 Survey Helper 72 Technician 73 Skilled Assistants-On The Site 74 Supervisor 75 Valuation Expert 76 Office Support Staff 77 Co-Ordinator 78 Senior Surveyor 79 Revenue Expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
15.
Rural Development #10583245 Price Bid
Providing Supplying And Erecting Various Different Material Machinery And Labour Services Internalroad At Grampanchayatshriramnagar-Haweli ( Jansuvidha Vishesh Anudan 2515-1505 ) - 40 / 60 Mm Metal 3 53Grade Cement 4 20Mm Metal 5 Crush Sand 6 Mrum 7 Pcc M-10 8 Concrete M-20 9 Bricks 10 Tanker For Water 11 Jcb 12 Crane 13 Road Roller 14 Concrete Mixer 15 Breaker 16 Dumper 17 Trimix 18 Tractor 19 Tractor Breaker 20 Inforamtion Board 21 Tractor Breaker 22 Labour Services Skilled Labour 23 Labour Services Unskilled Labour 24 Black Smith With Tools - Ii Class 25 Stone Cutter With Tools - Semi Skilled 26 Mason I Class Skilled 27 Mason Ii Class Skilled 28 Mechanic 29 Lorry Driver / Mixer Operator 30 Welder / Driller - Skilled 31 Maistry Skilled / Supervisor / Mate 32 Vibrator Operator - Skilled 33 Skilled Labour 34 Boreman Skilled 35 Asphalt Sprayer Skilled 36 Minor Or Blaster Semi Skilled 37 Quarry Man - Semi Skilled 38 Labour For Excavation In Hard Rock ( Un Blast ) 39 Bhisti ( Mixing / Curing ) - Semi Skilled 40 Mukadam - Semi Skilled 41 Tar Handler - Semi Skilled 42 Helper Un Skilled 43 Mazdoor - Unskilled Heavy Male 44 Mazdoor - Unskilled Heavy Female 45 Below Boy 46 Laboratory Assistant 47 Labour For Tile Turning 48 Excavator - Unskilled Heavy 49 Breaker - Semi Skilled 50 Chiseler Semi Skilled 51 Foreman Skilled 52 Jack Hammer Operator 53 Labour For Traffic Regulation 54 Watchman 55 Compressor Operator / Driver 56 Supervisor / Mate 57 Mali 58 Medical Officer 59 Operator ( Grouting ) 60 Junior Engineer 61 Surveyor 62 Autocad Operator 63 Attendent 64 Computer Typist 65 Tracer 66 Total Station Operator 67 Senior Engineer 68 Assistant 69 Operator / Fitter 70 Mazdoor Unskilled Light Male 71 Computer Operator 72 Survey Helper 73 Technician 74 Skilled Assistants-On The Site 75 Supervisor 76 Valuation Expert 77 Office Support Staff 78 Co-Ordinator 79 Senior Surveyor 80 Revenue Expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
16.
Educational and Research Institute #10547130 Price Bid
Tender For Package No – 07: External Development, Facade, Internal & External Signage Works For Imsf At Iisc Campus, Bangalore.; 1 EARTH WORKS 1.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to within IISc MSF Site and lift up to 1.5 m. as per the direction of PMC/Chief Engineer - IMSF : All kinds of soil Sqm 10.00 28.17 281.70 1.2 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same as per the direction of PMC/Chief Engineer - IMSF. : All kinds of soil Sqm 10.00 28.53 285.30 1.3 Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse within IISc MSF Site and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work as per the direction of PMC/Chief Engineer - IMSF : In all kinds of soils Depth upto 1.5 m. Cum 10.00 266.20 2,662.00 1.4 Earth work excavation for Foundation by mechanical means for all works , as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse within IISc MSF Site and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work as per GFC drawing and as per the direction of PMC/Chief Engineer - IMSF: In all kinds of soils a In all kinds of soils Depth upto 3 m Cum 16573.96 112.20 1,859,598.31 b Depth upto 3 m including De-watering activity Cum 100.00 116.75 11,675.00 c In all kinds of soils Depth 3 m to 6 m Cum 5000.00 128.70 643,500.00 d Depth 3 m to 6 m including De-watering activity Cum 100.00 136.50 13,650.00 Note: Any RCC/Concrete element found during the excavation, the dismantle of RCC/Concrete shall be paid separately in relevant item. 1.5 Filling Available in Excavated Work: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to within site and lift upto 1.5 m. as per GFC drawing and as per the direction of PMC/Chief Engineer - IMSF. Cum 21574.00 161.62 3,486,789.88 1.6 M Sand Filling: Supplying and filling in plinth, road / paver block and any similar Area with sand under floors/road, foundation of Bridges including watering, ramming, consolidating and dressing complete as per GFC drawing and as per the direction of PMC/Chief Engineer - IMSF Cum 1657.26 1710.84 2,835,306.70 1.7 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto any distance (lead) also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete as per the direction of PMC/Chief Engineer - IMSF 1.8 Clearing of bushes of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material as per the direction of PMC/Chief Engineer - IMSF. ; Beyond 30 cm girth upto and including 60 cm girth Each 67.00 438.98 29,411.66 1.9 Anti-Termite Works: The warranty should be minimum 10 years from the date of completion of the contract. 1.9.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm 119.01 129.80 15,447.50 1.9.2 Providing, diluting and injecting chemical emulsion for Post-constructional antitermite treatment with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration ; Along external wall where the apron is not provided using chemical emulsion @ 7.5 l/m2 of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: Mtr 4043.91 123.20 498,209.71 1.9.3 Providing, diluting and injecting chemical emulsion for Post-constructional antitermite treatment with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration ; Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 l/m including drilling and plugging holes etc. Mtr 5.00 60.50 302.50 1.10 Providing and laying 150 micron gauge Polythene sheet (LDPE) (IS 3395) below concrete to act as vapour barrier., to the required levels, including supply, loading and unloading, storing, transportation, laying, sealing of junctions and overlaps, all leads and lifts, etc. Sqm 10.00 22.00 220.00 1.11 Providing and Filling light weight material ( Light Weight Cinder / Wastage-Broken AAC Block ) in Sunken or similar area as per GFC drawing and as directed by PMC/Chief Engineer - IMSF. The rate shall be inclusive of all material, labour, all heights & levels, all lead & lift etc. as per site requirement. (The voids to be filled with fine light weight material and filling shall be well compacted) Cum 258.11 1714.92 442,638.00 1.12 Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a required thickness and up to 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing, Technical Specification and as per the direction of PMC/Chief Engineer - IMSF. Cum 25.00 2944.70 73,617.50 1.13 Providing and Laying of a minimum 250 GSM geotextile filter between pitching and embankment slopes, Behide Weep Hole and similar acitivities as well as to allow free movement of water without creating any uplift head on the pitching as per the direction of PMC/Chief Engineer - IMSF. Sqm 25.00 123.20 3,080.00 1.14 Providing & installing approved Perforated corrugated PVC pipes conforming to IS 9271 with prewrapped 250gsm. Geosynthetic filter material by laser guided trencher machine/by mechanical means including cost of pipe, filter material, pipe accessories and all taxes including all other ancillary operations complete and labour charges only for installation of site at work perforated corrugated PVC pipes including lowering into trenches, laying true to lines, level land and perfect leak proof linking at joints, fittings pipes accessories including the refilling the trench 50 cm around the pipe with gravel or selected earth available from the excavation and all other ancillary operations complete. 1.14.1 80mm dia. Mtr 50.00 323.40 16,170.00 1.14.2 100mm dia Mtr 50.00 389.40 19,470.00 TOTAL AMOUNT FOR EARTH WORKS 9,999,945.76 2 CONCRETE, REINFORCEMENT, SHUTTERING AND ALLIED WORKS 1) The approval related documents for supplied materials and item execution methodology must be submitted to PMC/Chief Engineer - IMSF for their review and approval, prior to initiate the process. The “Material Test Certificate (MTC)” to be submitted during supply of material at site along with all necessary supporting documents such as invoice and delivery challan etc. The delivered material/finished items “3rd party test” must be conducted at PMC/Chief Engineer - IMSF approved laboratory (NABL Certified) on “each delivery” or as directed by PMC/Chief Engineer - IMSF. During 3rd Party test if result found failed or not in line with the relevant IS Code then it will be rejected. The execution shall be started only after the approval of materials / documents from Architect / PMC/Chief Engineer - IMSF. This practice to be adopted for all items or all material of this Bill of Quantity. 2) All testing of concrete and other items to be conducted at site or off site as directed by PMC/Chief Engineer - IMSF. 3) Curing Compound are recommended to be used with approval of PMC/IMSF wherever it is required to minimize the water consumption for curing works. 4) To achieve GRIHA points, the BIS recommended wastes (such as fly ash, blast fuenace slag etc.), having properties similar to construction materials for building construction. These being low embodied energy material as well as waste products, reduce the need for virgin materials in the building structure and help divert waste from ladfills. Required details such as drawings, calculations, manufacturers cut sheets, PO Copy, quantity details, photographs and documentation, etc. (including any additional information, if required by the GRIHA Team) must be prepared and submitted by the Contractor. 2.1 Plain Cement Concrete Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications and as per GFC Drawing and as per the direction of PMC/Chief Engineer - IMSF. (The cost of formwork shall be paid separately) a Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates Cum 1217.52 6587.90 8,020,900.01 b Mix 1:4:8 Using 40 mm nominal size graded crushed coarse aggregates Cum 10.00 6230.40 62,304.00 2.2 Reinforced Cement Concrete .... more in document
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Karnataka View Result →
17.
Heavy Industries and Public Enterprises #10390733 AOC
Vertical Extension & Other Development Works at Academic Block Annex-2 Palayad Campus, Kannur University, Kannur, Kerala under PM-USHA scheme- 1 Civil work -General Structural work 2 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge25 mm average thickness 3 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter 4 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. 5 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar 6 Core Cutting of RCC slabs(12cm Maxi.thickness) by using mechanical core cutting equipment of required diameter of the pipe in full depth etc to the satisfaction of engineer in charge including all cost and conveyance materials and labours charge etc complete (dia 80-200mm) 7 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 8 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work ( Payment shall be made on the cross sectional area of R.C.C. or R.B work) as per direction of Engineer-in-charge. 9 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within alead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 10 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock 11 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 13 Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 14 Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 15 Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level 16 Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum). 17 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 18 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 19 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 20 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 21 Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) 22 Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges 23 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick. 24 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more 25 Block work & Finishing Work 26 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. 27 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 28 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) 29 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 30 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) 31 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 32 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats 33 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 34 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 35 Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections. 36 Teracotta Clay Jali work, For Building work, minimum 7.5 cm thick as per approved design and pattern of Engineer in charge in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand) with neat finish, polishing work all complete. 37 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wallwith suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channelof 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG),plaster board conforming to IS : 2095 : (part 3) 1996 (Board with BIS Certification marks) 38 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 39 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 40 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides 41 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness 42 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm 43 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in- charge. 44 Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm 45 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 46 Joinery 47 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 48 Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer- in-charge. 49 Providing and fixing factory made uPVC white colour casement/casement cum fixedglazedwindowscomprisingofuPVCmulti-chamberedframe,sashand mullion(whereeverrequired)extrudedprofilesduly reinforcedwith1.60+/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension,EPDMgasket,stainlesssteel(SS304grade)friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mmsizeforfixingframetofinishedwall,plasticpackers,plasticcapsand necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). 50 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness 51 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood 52 Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood 53 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc 54 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 55 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm 56 Providing and fixing CP Brass Handle 450mm in all types of doors with the necessary fittings and arrangements all complete. 57 Providingand fixing chromium plated brass handles with necessary screws etc. complete:200 mm 58 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality, with necessary screws etc complete as per direction of Engineer- in- charge. 59 French spirit polishing:Two or more coats on new works including a coat of wood filler 60 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece 61 Fire Metal door. Material Specifications: Frame : GI 1.60 mm, Shutter : GI 1.20 mm, Shutter Width / Active Shutter Width : 808.00 mm, Frame Profile: 143.00 mm X 57.00 mm, Frame Profile type : Normal, Frame Rebate : Double, Door type : Single leaf door, Infill Material : Honey Comb, Vision Panel Active: 200 mmX300 mm. 8nos Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SSS , 1no Euro profile half cylinder 3005, 42mm Key x Blank, Silver satin finish , 2no Surface door closer TS73, size EN2/3/4, with standard arm, Silver finish, 1no Clear glass, 6mm of size 200 x 300mm, 2 nos concealed flush bolt, Mortise sash lock with lever handle on side and panic lever on other side. The door should have a minimum fire rating of 2hrs . Wall Opening Size 1800X2250 mm. 62 Fire Metal door. Material Specifications: Frame : GI 1.60 mm, Shutter : GI 1.20 mm, Shutter Width / Active Shutter Width : 808.00 mm, Frame Profile: 143.00 mm X 57.00 mm, Frame Profile type : Normal, Frame Rebate : Double, Door type : Single leaf door, Infill Material : Honey Comb, Vision Panel Active: 200 mmX300 mm. 8nos Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SSS , 1no Euro profile half cylinder 3005, 42mm Key x Blank, Silver satin finish , 2no Surface door closer TS73, size EN2/3/4, with standard arm, Silver finish, 1no Clear glass, 6mm of size 200 x 300mm, 2 nos concealed flush bolt, Mortise sash lock with lever handle on side and panic lever on other side. The door should have a minimum fire rating of 2hrs . Wall Opening Size 1000X2200 mm. 63 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately) 64 Providing and fixing SS H handle having min 45 cm length in toughed glass door including all necessary screws etc. complete. 65 Providing and fixing of glass door SS Patch Lock with out handle in toughened glass door including all necessary screws etc. complete 66 Fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top & bottom fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in- charge. 67 Providing and fixing 3M Fasara frosted etching film of thickness 25 microns self- adhesive of approved colour, shade, and quality with cutting as per approved design and pattern, including cleaning of glass and making surface smooth for fixing of film to the surface, all completed as per the direction of the engineer in charge. 68 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover 69 Providing and fixing ball bearing for rolling shutters. 70 Sanitary and CP Fittings 71 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 72 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid 73 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 74 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 75 Providing and fixing ceramic urinal partitions of standard size as per direction of Engineer-in Charge and of approved shade 76 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 77 Providing and fixing uplasticised PVC connectionpipe with brass unions: 30 cm length15 mm nominal bore 78 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter 79 Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore 80 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 81 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x510 mm bowl depth 200 mm 82 Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm 83 Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in- charge. 84 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 85 Flexible pipe32 mm dia 86 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with C.P. brass screws and washers complete. 87 Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages. 88 Providing and fixing SS grating of approved quality and colour. Rectangular type with openable lid150 mm nominal size square 100 mm diameter of the inner hinged grating. 89 Providing and fixing disabled friendly bathroom kit with all accessories including wash closet with soft close seat cover and cistern with twin flush setting, wash basin of min dimensions 510mm x 400mm with all necessary fittings including Angle cock, Connection pipe, waste pipe, Spatula Lever basin mixer, Wall mounted 600mm long, Wall mounted grab bar 600 mm long and wall mounted hinged rail 750 x 750, Health Faucet with angle cock. Recommended Makes : CERA , Hindware, Jaguar or equivalent . 90 Plumbing 91 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall32 mm nominal outer dia pipes 92 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall40 mm nominal outer dia pipes 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall50 mm nominal outer dia pipes 94 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes 95 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes 96 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore 97 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore 98 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore 99 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore 100 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall 101 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall 102 Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall 103 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow 104 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee 105 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer 106 Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages. 107 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2 108 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2 109 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall 110 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend 111 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee 112 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl 113 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia End cap 114 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow 115 Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall 116 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend 117 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee 118 Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl 119 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap 120 Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow 121 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer 122 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore 123 Providing and placing on terrace (at all floor levels) polyethylene water storage tank:ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 124 Yard Plumbing 125 Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 126 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling 127 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg):With common burnt clay F.P.S ( non modular) bricks of class designation 7.5 128 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single pushfit Coupler110 mm 129 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.50110 mm bend 130 Tile and Granite work 131 Providing and laying Matt Finished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1200 x 600 mm. 132 Providing and laying Matt finished Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, ofapproved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 1200x600 mm 133 Providing and laying Anti Skid matt vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. 134 Providing and laying premium vitrified bathroom wall tile in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 135 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm 136 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining ( veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 ( 1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade ( To be secured to the backing by means of cramps, which shall be paid for separately).Area of slab over 0.50 sqm 137 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade. Area of slab over 0.50 sqm 138 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 139 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work 140 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 141 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 142 Providing and fixing 12 mm thick gang saw cut, mat /rough finished granite, machine cut for steps, ramps or inclined plate form with raking and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 143 Structural steel 144 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 145 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 146 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 147 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 148 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 149 False ceiling 150 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board 151 Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit. 152 Rainwater Harvesting ,Fire Tank,Septic Tank 153 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock 154 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock 155 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 156 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 157 Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level 158 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 159 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm 160 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm. 161 Supplying and fixing C.I with frame for manholes: 600mm x 600mm ( heavy duty) the weight of the cover and frame shall not be less than 208 kg 162 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 163 Providing and placing on terrace (at all floor levels) Stainless Steel 304as per IS 5522:1992 of capacity 5000 Litreswith suitable fixing arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 164 Providing and fixing of Fire Rated door 1200x2100mm- Hollow metal fire doors at all levels from ISO 9001-2015 certified Manufacturer. Fire door should be as per NFPA 80 and NFPA 252. All fire doors should be tested at UL for 120 minutes and should pass both UL10B and UL10C. Doors shall be made from pressed galvanized steel confirming to IS277 as per following specification.Frame:Door frame shall be single rebate grooved profile of size 125 x 55 mm made out of 1.6 mm (16 gauge) minimum thick galvanized steel sheet. Frames shall be mitered and field assembled with self-tabs. Frames to have in build grooved sealing system and shall be site fitted with fire rated EPDM gasket as standard. All provision should be mortised, drilled and tapped for receiving appropriate ANSI UL labeled hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with fire rated puff and the gaps shall be sealed with silicon sealant.Shutter: Door leaf shall be 46 mm thick fully flush double skin door without vision lite. Door leaf shall be manufactured from 1.2 mm (18 gauge) minimum thick galvanized steel sheet.The infill material shall be resin bonded honeycomb core. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI standard. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.Door and frames shall be finished Pure Polyester Powder coated and shall have passed minimum 500 hours of salt spray test.Vision glass: The glass shall be 5mm clear fire rated glass of equal rating and not exceeding size of 114 sq. inches.Door Hardware: Stainless steel Ball bearing Hinges 3 Nos, Minimum 90Kg hydraulic surface applied rack and pinion door closers, Mortice Sash Lock with cylinder. One Side Handle and Other Side with 2 point Panic Bar. 165 Road Work 166 Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 167 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 168 Water proofing 169 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 170 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured) 171 Landscaping 172 Supplying of Flowering Shrubs (Heliconiya st. Vincent red, Ixora bush, Cana durf etc..) 173 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removalof unsaverieable material?s as per direction of officer in charge (including cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100) 174 Providing and Laying Landscaping of outdoor area with buffalo grass and small plants with all necessary levelling and filling as required. 175 Signage 176 Providing and fixing in position the signage board made out of 3 mm opaque PVC foam board of computerised cut, PVC non reflective self adhesive vinyl painted foam board of required size and colour. 177 Providing and fixing non lit Signages made of CNC Cut Stainless Steel projected letters and fixing it at site with all necessary fitting arrangements and accessories as per the design and requirement on instructions of the engineer in charge. 178 Furniture 179 Two tiered reagent racks (MS with powder coating) with granite top of 150 mm depth for side workbenches. The two tier should be placed at a minimum spacing of 300 mm. The item should be in compliance with IS 4209 (2013), NABL etc. The Length should be customized as per lab workbench and vertical posts must be placed at appropriate spacing. 180 Supply and Installation of Sink Module with SinkEach sink module should have a minimum dimension of 900 mm (L) x 900 mm (W) x 900 mm (H) and made of MS as per IS 1730 shall be designed with a single cabinet (with 2 shutter, SS304 hinges for easy and noiseless opening and closing mechanism). This module should include a sink made of 5 mm thick polypropylene with black color body. Minimum Dimension of the sink: 450 mm (L) x 600 mm (W). Sink should include PVC tap connection-15mm diameter (Goose neck type), grating etc. The sink module shall be portable and provided with 18mm thick granite table top (with cut out for providing sink). Item to be inclusive of all necessary fitting arrangement.The item should be in compliance with IS 4209 (2013), NABL, WHO etc. 181 Supplying and Fixing of Lab work Table with Granite Top supported over 18mm thick marine plywood , frame work with with GI members with Heavy Duty Levelers, minimum dimension of 2000mm L x 750 mm D 182 Supplying and Fixing of Lab work Table with Granite Top supported over 18mm thick marine plywood , frame work with with GI members with Heavy Duty Levelers, minimum dimension of 2000mm L x 890mm D 183 Supply, Installation, Testing and Commissioning of Eye wash with Brass inject mould with epoxy powder coated body with auto released Valve and cup shaped water dispenser with min 1/2 HP power pressure booster pump 184 Counter Height Stools :Supply and erection of counter height stools ( bar stools ) of following specifications : Revolving adjustable Chrome plated steel body chairs with resistance to the corrosion. Cushion Seat with Lift mechanism for Adjustment of height. Minimum height 750mm before expansion. Medium Back rest and arm rest. Item shall be of reputed make. 185 Office Chair: Non-revolving executive chair with fixed armrest providing natural resting for arms. Seat with PU cutted foam backed fabric, back rest with mesh type fabric, Upholstery: Heavy duty rubber backed fabric in BLACK ( Size -55x60 cm) 186 Executive Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK 187 Revolving Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK 188 Cabinet/Wardrobe: Providing and fixing Cabinet/Wardrobe unit with 18 mm thick Multi wood board with one side decorative and other side balancing lamination. cupboard shutters edge to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with fixing chromium plated brass 50 mm cupboard or wardrobe knobs, special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Depth of shelves to be 300-600mm and shelves to be fix with proper support and bracket holders. as per layout drawing approved by Engineer in charge. Make laminate: Greenlam/ Merino / Century. Only front elevation will be measured. 189 Supply and erection of Airport type 3 seater waiting chair with powder coated chromium finish having minimum dimensions 1675mm length X 710mm width X 775mm total height and 400mm seat height . Seat: High quality cold rolled 1.2mm thick steel perforated sheet pressed and welded to form the shape. Arm & Leg: High quality 1.2mm thick MS Tube / Sheet . Cross bar: High quality cold rolled 2mm thick steel sheet pressed and welded to form the shape. 190 Table of size Min 2300x600mm Made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Greenply, Fineply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. The table is provided with 1 drawer, 1 Storage, 1 key board locks, handles, mini fix, dowels and screws. Exposed edges to be finished with 0.8 mm edge band as per specified colour. 191 Supply of wooden table with one drawer and Cupboard unit made of hard wood varnishing/painting all complete. Size: 1200x600x750mm 192 Providing & supply of Conference Table with executive chair of 13 Pax with the following specifications.Table top size :3600 x 1200mm. Table Tops –made of 25mm thick MDF with waterfall top edges finished in PVC Membrane using unique wrap around technology for better aesthetics & long lasting use. Under structure – Legs made of 25 mm thick standard Black matt colour post formed panels interconnected with 18mm thick standard Black matt colour pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management & Concealed wire management to take care of basic wiring requirements both horizontally & vertically. For closed configurations, liftable top cover, made of 12mm MDF finished in PVC Membrane, is provided to access the horizontal wire carrier. Vertical wire management is through flexible vertical wire manager, popup grommet with power & RJ45 Socket. Designed for Flexibility through modular Construction, PVC Membrane Finish Tops for seamless surface, Post formed Legs for safe use, Provision for easy wire management, Upgradeable / reconfigurable for future needs. 13 Nos Revolving adjustable type Medium height Back Office Chair with arm rest with back tilt and swivel mechanism constructed out of mild steel and high quality plastic. 193 Supply of wooded Chairs with armrest of Hard Wood Plank Seat and Reaper Back. 194 Supply of Wooden Bench and Desk made up of Mahagani of minimum size - Bench Size :1 83x30X46cm Desk Size :183x41x75 cm 195 Supply and installation of steel podium made of SS304 with min dimensions 500mm X 450 mm X 1200mm and having a sloped top surface, and having a decorative/ plain front face all made of SS 304 as per the design and approvals of the architect/ Engineer - In - Charge 196 Wiring-General Electrical work 197 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C 198 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 199 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 200 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 201 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 202 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 6 Sq.mm + 1 x 6 sq.mm earth wire 203 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C 204 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 205 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 16 sq. mm + 1 X 6 sq. mm earth wire 206 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 207 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 208 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 209 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm 210 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm 211 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm 212 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair 213 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 214 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 215 Fixtures 216 Supply and Fixing suitable size modular GI box with cover in front on and providing and fixing 1 no RJ 45 including connections as required. 217 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). 218 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 219 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet 220 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 221 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet 222 Supply and Installation of surface/recess mounted LED 2x2 luminaire with CRCA housing suitable with fully diffused diffuser for general lighting. The luminaire should have CRI > 80 and CCT of both 6500K/5700K, Cool White Light. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3700 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 36 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro or equivalent 223 Supply, conveyance and Installation of compact, 2 feet,10-15W,LED tube light with high lumen giving soft glare free light including all required mounting accessories, frames complete. (Philips/WIPRO/Havells or equivalent) 224 Supply, Installation of surface mounted LED Tubelight. The luminaire should have CRI > 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 30 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 25k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make - Philips, Crompton, Wipro, Havells 225 Supply, Installation of surface/recess mounted LED Round/Square luminaire with CRCA housing suitable with fully diffused diffuser for general lighting in office areas. The luminaire should have CRI > 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and efficacy of atleast 110 lumen/watt and Minimum system wattage of 10 -15 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro 226 Supply, conveyance and Installation of compact 10-15W LED Bulkhead Light giving soft glare free, Cool White light & complete with electronic driver including all required mounting accessories, frames, complete ( Make: Philips/WIPRO/Havells or equivalent) 227 Supply, Installation, Testing and Commissioning of 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent 228 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent 229 Supplying, conveyance and Installation of 150-250 mm sweep,1350 rpm, 3 - 5 blade BLDC Exhaust Fan including frames and all mounting accessories complete.Recommended Make: Atomberg Efficio/Crompton Brisk Air 230 Supplying, conveyance and Installation of BLDC Type Wall Fan having 3 blade, 400 mm sweep, Speed 1350 rpm, Air Delivery 70 CMM minimum, Wall Mount Fan including frames and all mounting accessories complete. Recommended Make: Atomberg Renesa/V-Guard ENVIRO WF BLDC/Havells Platina 231 Supply, Installation, Testing and Commissioning of 450 mm sweep, 900 rpm heavy duty exhaust fan with louver in existing opening including making good the hole to suite the size of above fan complete with connections using 3 core 1.5sqmm multi core pvc sheathed copper conductor cable etc as required. 232 SITC of skirting light fitting with white LED 3 module along with suitable size modular metal box with inner and outer plates with all accessories. 233 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). 234 Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. lCD 235 Supply and installation of 2 Nos. 4 ft MS powder-coated hanging rods for tube lights, including supply and laying of 1.5 sqmm copper PVC insulated FRLS wire (3 runs: Phase, Neutral, Earth), necessary hardware (ceiling clamps, saddles, junction box, connectors), complete mounting, terminations, testing, and labour charges — complete in all respects. 236 Network and CCTV System 237 Supply of 16 ports Network Switch, Rack-mountable 10/100/1000 Mbps, Switching capacity 35.7 Mbps Features: Flow control, Layer 2 switching, auto-negotiation, auto- uplink (auto MDI/MDI-X), Weighted Round Robin (WRR) queuing, Quality of Service (QoS) Power: AC 120/230 V (50/60 Hz) complete. Make D-Link/TP Link/Cisco or equivalent 238 Supply Installation Testing and Commissioning of 32 channel embedded Linux NVR (Network Video Recorder), must connect 32 channel IP cameras, Should support min 2 SATA HDD and each should support Min 2TB and must record video simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smart Event, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(HEVC)/H.264+/H.264, 2 Year Warranty, Image quality should be maintained throughout the warranty period. Make: CP Plus/Hikivision/Dahua or equivalent 239 Network Switch for CCTV. 16 Port PoE Switch 1000BASE-T Copper Ethernet PoE+ connections, 10M/100M/1G RJ-45 copper ports, 1000BASE-X Fiber SFP ports, 16 port Auto sensing 10/100/1000 Mbps PoE, minimum CPU memory 512 MB with 2 SFP/combo ports, Energy Efficient Ethernet (IEEE 802.3az) Make: CP Plus/Netgear or equivalent 240 Supply, Conveyance and Installing of 2MP IP Dome/Bullet Camera having Progressive Scan True Day and Night Colour IR Camera having effective pixel of 2 MP, Video frame rate of 2MP @30FPS, Minimum illumination of 0.01 [email protected], 0 lux@IR On, 20 M IR Range, 24 IR LED, AWB, AGC, BLC, 2D Noise reduction, with 3.6mm board lense, 12 VDC, PoE IP67 rated weatherproof performance. 1 year warranty. Make: Bosch/CP Plus/Honeywell or equivalent 241 Supply and fixing of 6U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete 242 Supply Installation Testing & Commissioning of 16 Port Loaded Cat 6 - U/UTP Modular Toolless Patch Panel having a metal structure enabling them to be durably fixed to the uprights of the 19 chassis. Include rear cable manager to hold cables without need for cable ties. The termination of I/0s shall be without any manual crimping tools. 243 Supply and fixing of 4U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete. 244 Supply and connecting 2 meter long CAT6 cable Patch cord having RJ45 connectors crimped at both ends, to the existing outlets as required. Make: D-Link/TP-Link or equivalent 245 Supply and Installation of LED Color display of minimum 32 inch screen, complete, UHD display Make: LG/Samsung/Panasonic or equivalent. 246 Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable 247 Supply, Installation and Integration of Dual Band WiFi Access Point on false ceiling along with accessories, having Fast Wireless Speed, simultaneous 2.4GHz 300Mbps and 5GHz, 867Mbps Dual Band connections for 1.2Gbps of total available bandwidth, Superior Coverage of Four Fixed External antennas provide stable wireless connections and optimal coverage, App Control, Interface of 1× 10/100 Mbps WAN Port and 4× 10/100 Mbps LAN Ports having Working Modes (Router Mode / Access Point Mode). Make: TP-Link/Netgear/DLink or equivalent 248 UPS 249 Supply, Installation, Testing and Commissioning of True on-line Double Conversion 10 KVA UPS system with 3:3 Crest Factor Three Phase Input Three Phase Output. Inversion shall be Microprocessor controlled with instantaneous sine wave Control using IGBT. UPS shall have standard display features, alarms, safeties, etc Input Voltage range : a) Phase – Three Phase with ground b)Voltage range 190 VAC – 470 VAC c)Input Frequency :50/60 Hz d)Power Factor : 0.95 or above e)THD : less than 5% with full load Bypass f) Voltage Range – 200VAC – 240 VAC ) Frequency range – 45-55 Hz/55-65 Hz Output Voltage Range h)Voltage Range – 200VAC – 240 VAC i)Frequency range – 50/60 Hz j)Voltage distortion – linear load <= 2% k)Voltage distortion – nonlinear load <= 5% l)Output waveform – pure sinewave m) Crest Factor – 3:1 Minimum Back up time : Continuous 30 Minutes at full load Rectifier shall be Full wave Type (Shall fully meet the specified input power requirements) Battery Type: Sealed Lead Acid Maintenance Free DC Voltage : 96V DC System, Battery Nos and capacity shall be designed for optimum storage space. Installation &Commissioning Required Breakers also needs to be provided in input and output side for the UPS. Make: Liebert Vertiv/APC by Schneider/Numeric by Legrand 250 Cable Trays 251 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.375 mm width X 50 mm depth X 2.0 mm thickness 252 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness 253 Fan Clamp 254 Providing and fixing 16 mm S.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 255 DB and Switchgear 256 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) 257 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 258 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 259 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door 260 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 261 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural 262 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole 263 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 264 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 265 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 266 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 267 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 268 Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts C curve TP MCB complete with connections, testing and commissioning etc. as required. 269 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole 270 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral 271 Earthing and Lightning Arrestor 272 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re- filling etc. as required. 273 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 274 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. 275 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 276 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 277 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 278 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. 279 Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. 280 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 281 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. 282 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) 283 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) 284 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG) 285 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG) 286 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG) 287 Street Lights 288 Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 289 Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps 290 Water Purifier 291 Supply and Installation of Water Purifier having Multi-Stage Filtration: RO (Reverse Osmosis), UV (Ultraviolet), UF (Ultrafiltration), Storage Capacity: 7-9 Liters, Purification Features: RO: Removes dissolved impurities, heavy metals, and salts.UV: Kills bacteria, viruses, and other microorganisms. UF: Filters out fine particles and microorganisms. Mineral Booster: Adds essential minerals to enhance water taste.TDS Controller: Adjusts Total Dissolved Solids for taste preference. ActiveCopper: Infuses copper ions into the water for added health benefits.Aqua Taste Booster: Enhances the taste and maintains optimum pH level. In-Tank UV Disinfection: Keeps stored water pure.Smart Display/Indicators: Alerts for filter change, UV fail, water level, and service needs. Super Fine Sediment Filter: Removes fine and coarse particulate impurities. Water Level Indicator: Monitors the purified water level in the storage tank. Make: Aquaguard Aura 7L/ Bluestar Aristo 7L/Kent Grand Plus ZWW 9-Litre/ LG 8L 292 LT Cabling and Termination 293 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp 294 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp 295 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp 296 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 297 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp 298 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm 299 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm) 300 Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 400 sq mm 301 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm) 302 LT Panels 303 Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work. General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall befl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 400A 3kA 4 Pole MCCB - 1no Ics = 100% Icu rating Digital Voltmeter 0- 500V with selector switch & Digital ammeter (0-400A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 400A. Out going : 250A ,50kA 4 Pole MCCB - 2no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 304 Lift panel- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 1) 63A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch & Digital ammeter (0-63A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 63A. Out going : 1) 40A ,16-25kA TP MCB - 6 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list.Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 305 Sub Panel- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required. Incomer : 1) 63A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch &Digital ammeter (0-63A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 63A. Out going : 1) 32A ,16-25kA 4 Pole MCCB - 4 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 306 SSB2- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 1) 250A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch & Digital ammeter (0-250A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 250A. Out going : 1) 63A ,16-25kA 4 Pole MCCB - 8 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 307 Transformer 308 Supply , Installation, Testing and commissioning of 500 kVA outdoor unitized substation with an 11kV/433V dry-type cast resin transformer and a 630A VCB typically includes a compact prefabricated design conforming to IEC62271-202 standards, offering IP53/IP23 protection, and featuring compartmentalized construction to prevent accidental entry into energized areas. The substation is designed to withstand electrical impulses, thermal, and dynamic stresses, ensuring reliable and robust performance with low power loss and noise levels. The installation involves placing the substation on a prepared concrete plinth, connecting high-tension (HT) and low-tension (LT) cables, and ensuring proper earthing and safety measures. The commissioning process includes testing the transformer, switchgear, and protection systems to verify operational integrity. Make: Unipower/Intrans/Voltamp 309 MSB and APFC Panel 310 Supplying, installation, testing & commissioning of cubical type MAIN SWITCH BOARD suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having front surface area 6 sq.mtr (Approx.) fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 630 Amp capacity extensible type TPN aluminium alloy bus bars of height conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with sq. mm. PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears :- Interlocking:Electrical through advance contacts in MCCB/ ACB’s (incomers & bus couplers) and mechanical (castel key) interlocking should be provided to ensure that only one supply is available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section.Interlocking b(I) Incoming : 2 Nos 800 Amps (DG and MAINS) each four pole ACB of fault breaking capacity 50 KA (Ics=Icu upto 433 V manually operated, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS 1397- 2 : 1993 as amended up-to-date complete with following accessories for each MCCB(a) Independent manual spring closing mechanism- 1 No.(b) Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection- 1 set.(c) Digital* type Voltmeter (0-500 V), with selector switch & back up HRC fuses/MCBs-1 set. (d) Digital* type Ammeter (0-.600 Amp), with selector switch and one set of 3 nos. CT’s of ratio. 800/5A Class I accuracy and 15 VA burden- 1set. (Ratio to be fi lled up).(e) 3 Nos. Phase indication LED lamps with 2 Amp back up HRC fuse, breaker ‘ON’ indicating light with 2 A HRC fuse, test terminal block set, fuses, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required.(f) Shunt trip coil 220 V A.C. (II) Bus Bars :TPN aluminium bus bars of minimum of 800 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 Sec (II) Outgoing :(1) (a) 4 Nos. 250 Amp 4 Pole MCCB (Ics = 35 kA upto 433 V) (b) CT’s of ratio 250/5 Amps Nos. (c) Digital* type ammeter (0- 400 Ap) with selector switch set. (2) (a) 1 Nos. 200 Amp4 Pole MCCB for (Ics = 35 kA upto 433 V) (b) CT’s of ratio 200/5 Amps set (c) Digital* type ammeter (0- 250 Amp) with selector switch set. (3) 3 Nos 160 Amp 4 Pole MCCB (Ics = 35 kA upto 433 V) (b) CT’s of ratio 160/5 Amps set (c) Digital* type ammeter (0- 200 Amp) with selector switch set. The switchgears/measuring instruments shall be as per the Choice of the Engineer in charge. The panel shall be mounted on required structural steel supports and frames for mounting, the price quoted shall be inclusive of the same. The panel shall have suitable provision for connecting to the incoming cables of 3R x 400 sqmm XLPE Aluminium cables and shall be provided with necessary earth leakage relays as per the Inspectorate Norms. The panel shall be as per the IS standards and shall conform to all norms of EB/Inspectorate/CEA. Make of Switchgear : ABB/L & T/Schneider Electric/Siemens/Legrand 311 Design, Manufacture, Supply, Installation, Testing and Commissioning of Automatic Power correction Panel having Incomer: 250A, TPN MCCB, Digital Multifunction meter for V,A,F,PF With CTs CL:1 with RYB Indication lamps-1 Set 250A Aluminium bus bar with heat shrinkable insulation sleeves-1 set, Intelligent power factor controller with control MCBs etc. complete The panel shall comprise of suitable combination of capacitor banks upto a total of 100 kVAR and shall be designed as per the standards of Electrical Inspectorate/CEA. 312 DG and AMF Panel 313 Supply, Installing, Testing and Commissioning of & Silent Type& Diesel Generating set having CPCB IV+ acoustic enclosure having Prime Power Rating of 500 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the followings: Diesel engine radiator cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. Engine mounted Instrument Panel fitted with and having digital display and necessary indication coupled to Synchronous alternator rated at 500 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor. Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Daily service fuel tank of 440-460 litres capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Dry exhaust manifold with hospital exhaust silencer and catalytic convertor. 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (lead acid type) as required as per specifications. Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications. 314 Design, Fabricating, Supply, Installing, Testing & Commissioning of automatic mains failure control including auto by-pass panel, suitable for 500 KVA silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following: (a) 1 Nos. 630 Amp., 50 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50-100% having adjustable OL & SC. Set at 350A (b) Auto/Manual/Test/Off selector switch (c) 2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay. (d) 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering(e) Energy analyser unit to indicate current voltage frequency power factor and KWH(f) Indicating lamps for load on mains and load on set(g) Fuse for instruments(h) Battery charger, complete with transformer/ rectifi er, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment.(i) Main supply failure monitor(j) Supply failure timer(k) Restoration timer(l) Control unit with three impulse automatic engine start/stop and failure to start lockout.(m) Impulse counter with locking and reset facility.(n) ON/OFF/Control circuit switch with indicator(o) Audio/Video annunciation for(i) High water temperature(ii) Low lubricating oil pressure(iii) Engine over speed(iv) Engine fails to start(v) Full load/maximum load warning. AMF Panel shall be connected to Main Switch Board incomer with necessary interlocking arrangement to prevent simultaneous switching on of power supplies. All integration between Main Switchboard and AMF Panel is under contractor scope. 315 HT Cable 316 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3 core 300 sq mm 317 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm 318 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm 319 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm 320 Air Conditioning Works 321 Supply, Installation, testing and commissioning of 3 x 3 Cassette type Air Conditioner of following capacity and specifications: Consisting of ceiling-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single-phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation, with R-32/R-410A or equivalent refrigerant and fixing of room (fan coil) unit on ceiling, standard 5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1 dia drain PVC pipe with insulation up to 5 m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas, suitable stabilizer etc complete as required. (Make: Voltas, Blue Star, Daikin, Hitachi, Carrier or equivalent). Minimum 2 TR 3 Star rated (inverter type AC) as per BEE 322 Supplying additional copper piping of required size and connecting the same to the available piping and extension of the same through 100mm PVC duct inside false ceiling. 323 Electrical Dismantling Works 324 Dismantling of existing outdoor transformer and handing over to client as required by stacking the same within the campus premises, including accessories complete as per direction of engineer-in-charge 325 Dismantling of existing DG set 100 kVA, AMF panel etc and handing over to client as required by stacking the same within the campus premises, including accessories complete as per direction of engineer-in-charge 326 Electrical Works- Fire 327 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm 328 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp 329 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 330 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp 331 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm) 332 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm) 333 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm) 334 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 335 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 336 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) 337 Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 338 First Aid Hose reel &Wet Riser system 339 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.a.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585b.20 mm nominal internal dia gun metal globe valve & nozzle. c.Drum and brackets for fixing the equipmets on wall.d.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m 340 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 341 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way-100 mm dia M.S. Pipe 342 Supply and fixing of Air release valve SS body of 25 mm dia (UL Listed). 343 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations.25 mm dia Make : Kartar/ Atom 344 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 345 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304) 346 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304) 347 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel 348 Hose Box - Supply, Installation, Testing and Commissioning of Hose Box -Double door - (cabinet) to accommodate Two pieces of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pipe. The cabinet is made of MS sheet, painted in approved red colour with glass fronted hinged doors and lock &key (UL Listed). 349 Supply and Installation of Fire Brigade Draw-out Collecting head of CI Body having gunmetal 63mm dia instantaneous male draw out confirming to IS:903 suitable to fit on 100mm dia pipe with necessary flanges, rubber gasket, nut & bolts and other items. 350 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 351 Fire extinguishers 352 Supply &installation of ISI ABC type fire extinguisher of 4 kgs. Make SAFEX/ MINIMAX / CEASEFIRE or equivalent(UL Listed) 353 Supply &installation of CO2 type fire extinguisher of 4.5 kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 354 Supply & installation of water mist type fire extinguisher of 9 liters. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 355 Supplying & Installing of Clean agent based automatic modular fire extinguisher (ceiling mounted) suitable for A,B,C class fires & electrical fires, Capacity- 5Kg 356 Supplying & Installing of Mechanical Foam (Stored Pressure) Type fire extinguisher of 9L capacity with mounting clamp. ISI approved. Make : SAFEX/MINIMAX/CEASEFIRE or equivalent 357 Fire Pumps & Fire Panel 358 Electric driven Main Fire Pump: Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.1620 lpm at 56 m Head 359 Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. 1620 lpm at 56 m Head 360 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)a.Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325.c. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. As required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 56 m Head 361 Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING (Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)Main Fire Pump125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.Jockey Pump63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.DIESEL ENGINE CONTROLControl for diesel engine comprising - Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller.Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification 362 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 150mm 363 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 80mm 364 Supply and Installation of 12V DC, 200Ah maintenace free battery suitable for Diesel Engine driven fire pump operation with required connect cable set, battery stand. 365 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 100mm 366 Signages 367 Supply and fixing in position Exit Signages photo luminescent type with indication arrows and letters Exit/Fire Exit/ Staircase/FIRE/Fire Station/Fire Fighting Equipment/Fire Duct/ Fire Extinguisher/ Floor/Fire Command Centre/Fire Pump Room/ No Smoking / Danger/ Call point / Sounder Identification Numbers (Ground/ 1st/2nd)/ In case of the fire do not use lift, use stairs and other mandatory signages recommended by Fire Departments having dimension 30 cm x 15 cm complete inculding fixing mechanism. 368 Supplying and Installing in position the signages approved by Kerala state fire service - of minimum size 1ft x 1.5ft made out of PVC rigid sheet 3mm thick with computer cut PVC non- reflective self adhesive imported vinyl painted on the front of PVC rigid sheet complete with wall mounting arrangements with mirror screws. with lettering- ASSEMBLY AREA 369 Signboards: Supply and Installation of Fire Escape Plan with fire fighting equipment location, exit in A3 Foam sheet with plastic lamination with necessory accessories to fix it on wall. 370 Supply and fixing in position & Fire Order& signage in suitable size made of high quality PVC foam sheet with photo luminescent lamination to make it glow automatically in the dark, with suitable arrangement to fix it on wall. 371 Supplying & fixing in position Assembly Point sigange in suitable size on aluminium composite panel with suitable stand to fix it on open area outside building. Assembly Point 372 Terrace pump 373 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)a.Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-F insulation, conforming to IS-325.c. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head 374 Design, Supply, Installation, Testing, and Commissioning of an Automatic Terrace Fire Pump Panel, including:- IP54-rated enclosure with powder-coated CRCA sheet steel.- 32A 16kA MCCB, 15 HP-rated pump 3P contactor, overload relay, and pressure switch for automatic pump operation.- Auto/Manual selector switch, START/STOP push buttons, hooter, timer, and protection features (dry-run, phase failure, etc.).- Indicators (Power ON, Pump Running, Fault, Low Pressure), meters (Voltmeter, Ammeter with selector switches).- Copper wiring, termination, and provision for cable glands.- Installation, onsite calibration, and full functional testing for pressure-based automation. 375 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 376 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 377 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 378 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 379 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.100mm dia 380 Pressure Guage-Supply, Installation, Testing and Commissioning of pressure guage, 4 & dial, 0 - 200 psi range 3/8 BSP weather proof with stainless steel internals, siphon tube including fittings etc (UL Listed). Make: H Guru/Pointer 381 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations (UL Listed).20 mm dia Make : Kartar/ Atom 382 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) 383 Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 384 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required 385 Above Ground Piping 386 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia 387 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia 388 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia 389 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :250 mm dia (wall thickness 6.3 mm) 390 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :150 mm dia 391 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :200 mm dia (wall thickness 6.3 mm) 392 Supply and Installation of 80mm dia M.S. &C& Class Diesel Engine exhaust pipe duly insulated with 50mm thick Glass wool with 1mm thick aluminium sheet cladding with bellows, flexible joint, necessary support, making hole in brick wall for pipe installation.Pipe dia 80mm 393 Underground piping 394 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (75 cm below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 150 mm. Make - TATA / JINDAL 395 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (75 cm below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 200 mm. Make - TATA / JINDAL 396 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (1m below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 100 mm. Make - TATA / JINDAL 397 Valves, measuring devices & switches 398 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:200mm dia 399 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required80 mm dia 400 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 401 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required150 mm dia 402 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80mm dia 403 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150mm dia 404 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.150mm dia 405 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 406 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required 407 Pressure Gauge-Supply, Installation, Testing and Commissioning of pressure gauge, 4 dial, 0 - 200 psi range 3/8 BSP weather proof with stainless steel internals, siphon tube including fittings etc (UL Listed). Make: H Guru/Pointer 408 Supply and fixing of Air release valve Brass body of 25 mm dia (UL Listed) following IS standards, with required pressure rated. 409 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations.25 mm dia Make : Kartar/ Atom 410 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 411 MOEFA system, Automatic Detection & Fire Alarm System 412 Supplying, installing, testing and commissioning approved make Microprocessor based Multi-loop, Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 trouble events including1000 alarm log history events, Self Programmable alphanumeric keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop and shall be extendable upto 10 Loops. Each loop shall have a capacity of minimum 125 detectors & 125 other devices exculding 20% spare. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition with the charging capacity of 200AH. The panel shall be capable of self programing without any dependancy on dongle or programming software. Quoted rate shall include supply of necessary software & hardware for progamming the panel with all necessary licence. Panel shall have Modbus over IP protocol for future integration with BMS. However, for present arrangement FA system will be standalone with 24x7 monitoring. The panel shall be capable of connecting to the cloud platform/solution. Complied to meet UL864, 10th Edition 6 Loop Networkable Addressable Fire Alarm Control Panel(Make: Honeywell or Equivalent) 413 Supplying, installation, testing & commissioning of addressable fire control module complete as required. 414 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 415 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. 416 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 417 Supplying, installation, testing & commissioning of fault isolator complete with base as required. 418 Supplying, Installation, testing & commissioning of external power supply unit provides regulated and filtered 24 VDC power for hooter operation.Battery backup with built in charging. 419 CABLING & WIRING Supplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 420 Miscellaneous 421 Preparation of initial and final drawings, submission to Panchayath, Municipality, KSEB, Electrical Inspectorate, Kerala Water Authority, State Pollution Control board, Fire Department, Factories and Boilers and other agencies if any for getting approval, sanction and No Objection Certificate for building permit and completion from Fire Department and other department. Quoted rate shall be excluding statutory fee (All statutory fees shall be borne by Client-actual statutory fees shall be reimbursed on submission of original bill/challans from authorities).
Contract Date: Jul 17, 2025 Contract Value : ₹ 11.48 Crore
Boards / Undertakings / PSU No of Bidders 1
Kerala View Result →
18.
Rural Development #10390184 Price Bid
Providing And Supplying Various Labour Services at Grampanchayat Aaglambe Tal Haveli Dist Pune - 2 Skilled Labour 3 Unskilled Labour 4 Black Smith With Tools - II Class 5 Stone Cutter With Tools - Semi Skilled 6 Mason I Class Skilled 7 Mason II Class Skilled 8 Carpenter I Class Skilled 9 Carpenter II Class Skilled 10 Plumber With Tools - Skilled 11 Glazier With Tools - Skilled 12 Tin Smith With Tools - Semi Skilled 13 Painter I Class Skilled 14 Painter II Class Skilled 15 Head Fitter With Tools - Skilled 16 Mechanic 17 Lorry Driver / Mixer Operator 18 Welder / Driller - Skilled 19 Polishman - Semi Skilled 20 Assistant Plumber - Skilled 21 Maistry Skilled / Supervisor / Mate 22 Vibrator Operator - Skilled 23 Skilled Labour 24 Boreman Skilled 25 Asphalt Sprayer Skilled 26 Minor or Blaster Semi Skilled 27 Quarry Man - Semi Skilled 28 Painter / White Washer - Semi Skilled 29 Labour for Excavation in Hard Rock (Un Blast) 30 Tile Turner Semi Skilled 31 Mazdoor - For Polishing 32 Bar Bender Skilled 33 Bhisti (Mixing / Curing) - Semi Skilled 34 Mukadam - Semi Skilled 35 Tar Handler - Semi Skilled 36 Helper Un Skilled 37 Tree Cutter - Semi Skilled 38 Navaghani 39 Mazdoor - Unskilled Heavy Male 40 Mazdoor - Unskilled Heavy Female 41 Below Boy 42 Fitter With Tools I Class Skilled 43 Fitter With Tools II Class Skilled 44 Gun Man for Guniting 45 Laboratory Assistant 46 Labour for Tile Turning 47 Excavator - Unskilled Heavy 48 Breaker - Semi Skilled 49 Hole Driller Semi Skilled 50 Chiseler Semi Skilled 51 Foreman Skilled 52 Bandhani Semi Skilled 53 Emgraver for lettering Skilled 54 Frabi - Weld - Drilling 55 Khalashi / Diers 56 Jack Hammer Operator 57 Electrician 58 Welder Skilled 59 Labour for Traffic Regulation 60 Watchman 61 Compressor Operator / Driver 62 Supervisor / Mate 63 Blacksmith (1st Class) Welder / Plumber / Electrician. 64 Blaster (Stone Cutter) 65 Mali 66 Mazdoor / Dresser (Semi Skilled) 67 Mazdoor / Dresser Sinker B116 Skilled 68 Medical Officer 69 Operator (grouting) 70 Para Medical Personnel 71 Mazdoor unskilled female (light) 72 Painting Lettering Number 73 Junior Engineer 74 Surveyor 75 Autocad Operator 76 Attendent 77 Computer Typist 78 Tracer 79 Total Station Operator 80 Senior Engineer 81 Assistant 82 Operator / Fitter 83 Mazdoor Unskilled Light Male 84 Computer Operator 85 Survey Helper 86 Technician 87 Skilled Assistants-on the site 88 Supervisor 89 Valuation expert 90 Office support Staff 91 Co-ordinator 92 Senior Surveyor 93 Revenue expert 94 Welder
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
19.
Rural Development #10389945 Price Bid
Providing and Supplying various different material and machinery and Labour services Creamtorium Sudharna at Grampanchayat Bahuli Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
20.
Rural Development #10389943 Price Bid
Providing and Supplying various different material and machinery and Labour services Protection Wall on Smashanbhumi road at Grampanchayat Bahuli Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Mild Steel 10 M S Steel 11 Structural Steel 12 Rubble stone excluding royalty 13 Corner stone 38*20*30cm 14 Khandakies 15 Pin Header (Standard Size) 16 Bricks (Red) 17 AAC Block 600x200x100 mm 18 Jointing Mortar 19 Fly ash Bricks 20 P.V.C. Cowl 100 mm 21 Close graded Granular sub-base Material 53 mm to 9.5 mm 22 M15 23 Centering Oil 24 Country Teak Wood 25 Ghana teak wood 26 Teak Wood planks above 2.5 m length 27 Teak wood bidding 1/2 * 1/2 28 T.W.Balli 100 mm dia 29 Jungle wood (non teak) normal 30 Bamboo 25mm dia.(4.5 to 6m) 31 Bamboo 50mm dia. 32 Bamboo Matting 1.2*1.8m 33 Ply wood 12mm thick 34 Ply wood 6mm thick 35 Mica laminate as per ISI 0.1 mm thick 36 Face Veneel board 4 mm thick 37 Particle board B.W.P.Phinol bond 12mm thick 38 Particle board B.W.P.Phinol bond 19 mm thick 39 Formica 1.5 mm thick 40 Tower bolt brass oxidised 10 mm dia length 150 mm 41 Ferical 42 Ply wood 18mm thick Commercial 43 Teak wood battens 50 * 25mm 44 Teak wood batten 25 mm * 12 mm 45 Veneer 3.5 to 4 mm thick 46 Stone Dust 47 Soft Murum 48 Hard Murum 49 Sand - Crushed 50 Bricks II Class 51 Rubble stone excluding royalty 52 bricks 53 Tanker for water 54 JCB 55 Crane 56 Road Roller 57 Concrete mixer 58 Breaker 59 dumper 60 Tractor 61 Tractor Breaker 62 Inforamtion Board 63 Tractor Breaker 64 Labour Services Skilled Labour 65 Labour Services UnSkilled Labour 66 Black Smith With Tools - II Class 67 Stone Cutter With Tools - Semi Skilled 68 Mason I Class Skilled 69 Mason II Class Skilled 70 Mechanic 71 Lorry Driver / Mixer Operator 72 Welder / Driller - Skilled 73 Maistry Skilled / Supervisor / Mate 74 Vibrator Operator - Skilled 75 Skilled Labour 76 Boreman Skilled 77 Asphalt Sprayer Skilled 78 Minor or Blaster Semi Skilled 79 Quarry Man - Semi Skilled 80 Labour for Excavation in Hard Rock (Un Blast) 81 Bhisti (Mixing / Curing) - Semi Skilled 82 Mukadam - Semi Skilled 83 Tar Handler - Semi Skilled 84 Helper Un Skilled 85 Mazdoor - Unskilled Heavy Male 86 Mazdoor - Unskilled Heavy Female 87 Below Boy 88 Laboratory Assistant 89 Labour for Tile Turning 90 Excavator - Unskilled Heavy 91 Breaker - Semi Skilled 92 Chiseler Semi Skilled 93 Foreman Skilled 94 Jack Hammer Operator 95 Labour for Traffic Regulation 96 Watchman 97 Compressor Operator / Driver 98 Supervisor / Mate 99 Mali 100 Medical Officer 101 Operator (grouting) 102 Junior Engineer 103 Surveyor 104 Autocad Operator 105 Attendent 106 Computer Typist 107 Tracer 108 Total Station Operator 109 Senior Engineer 110 Assistant 111 Operator / Fitter 112 Mazdoor Unskilled Light Male 113 Computer Operator 114 Survey Helper 115 Technician 116 Skilled Assistants-on the site 117 Supervisor 118 Valuation expert 119 Office support Staff 120 Co-ordinator 121 Senior Surveyor 122 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
21.
Rural Development #10389942 Price Bid
Providing and Supplying various different material and machinery and Labour services Internal road and Gutter at Grampanchayat Bahuli Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 R.C.C.Pipe 450mm dia.(Np3)2.5m long 22 R.C.C.pipe Np2 class 450mm dia. 2.5m long 23 R.C.C.Np2 Pipe Collar 450 mm Dia. 24 Sewer trap 25 bricks 26 Tanker for water 27 JCB 28 Crane 29 Road Roller 30 Concrete mixer 31 Breaker 32 dumper 33 Tractor 34 Tractor Breaker 35 Inforamtion Board 36 Tractor Breaker 37 Labour Services Skilled Labour 38 Labour Services UnSkilled Labour 39 Black Smith With Tools - II Class 40 Stone Cutter With Tools - Semi Skilled 41 Mason I Class Skilled 42 Mason II Class Skilled 43 Mechanic 44 Lorry Driver / Mixer Operator 45 Welder / Driller - Skilled 46 Maistry Skilled / Supervisor / Mate 47 Vibrator Operator - Skilled 48 Skilled Labour 49 Boreman Skilled 50 Asphalt Sprayer Skilled 51 Minor or Blaster Semi Skilled 52 Quarry Man - Semi Skilled 53 Labour for Excavation in Hard Rock (Un Blast) 54 Bhisti (Mixing / Curing) - Semi Skilled 55 Mukadam - Semi Skilled 56 Tar Handler - Semi Skilled 57 Helper Un Skilled 58 Mazdoor - Unskilled Heavy Male 59 Mazdoor - Unskilled Heavy Female 60 Below Boy 61 Laboratory Assistant 62 Labour for Tile Turning 63 Excavator - Unskilled Heavy 64 Breaker - Semi Skilled 65 Chiseler Semi Skilled 66 Foreman Skilled 67 Jack Hammer Operator 68 Labour for Traffic Regulation 69 Watchman 70 Compressor Operator / Driver 71 Supervisor / Mate 72 Mali 73 Medical Officer 74 Operator (grouting) 75 Junior Engineer 76 Surveyor 77 Autocad Operator 78 Attendent 79 Computer Typist 80 Tracer 81 Total Station Operator 82 Senior Engineer 83 Assistant 84 Operator / Fitter 85 Mazdoor Unskilled Light Male 86 Computer Operator 87 Survey Helper 88 Technician 89 Skilled Assistants-on the site 90 Supervisor 91 Valuation expert 92 Office support Staff 93 Co-ordinator 94 Senior Surveyor 95 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
22.
Rural Development #10389940 Price Bid
Providing and Supplying various different material and machinery and Labour services Bhagatwadi Road at Grampanchayat Bahuli Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
23.
Rural Development #10389938 Price Bid
Providing and Supplying various different material and machinery and Labour services Bhagatwadi Road at Grampanchayat Bahuli Tal Haveli Dist Pune- 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
24.
Rural Development #10389936 Price Bid
Providing and Supplying various different material and machinery and Labour services Bahuli Sarjai Mata Temple towards main road at Grampanchayat Bahuli Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
25.
Rural Development #10389867 Price Bid
Providing and Supplying various different material and machinery and Labour services Internal road and Gutter at Grampanchayat Jambhali Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 R.C.C.Pipe 450mm dia.(Np3)2.5m long 22 R.C.C.pipe Np2 class 450mm dia. 2.5m long 23 R.C.C.Np2 Pipe Collar 450 mm Dia. 24 Sewer trap 25 bricks 26 Tanker for water 27 JCB 28 Crane 29 Road Roller 30 Concrete mixer 31 Breaker 32 dumper 33 Tractor 34 Tractor Breaker 35 Inforamtion Board 36 Tractor Breaker 37 Labour Services Skilled Labour 38 Labour Services UnSkilled Labour 39 Black Smith With Tools - II Class 40 Stone Cutter With Tools - Semi Skilled 41 Mason I Class Skilled 42 Mason II Class Skilled 43 Mechanic 44 Lorry Driver / Mixer Operator 45 Welder / Driller - Skilled 46 Maistry Skilled / Supervisor / Mate 47 Vibrator Operator - Skilled 48 Skilled Labour 49 Boreman Skilled 50 Asphalt Sprayer Skilled 51 Minor or Blaster Semi Skilled 52 Quarry Man - Semi Skilled 53 Labour for Excavation in Hard Rock (Un Blast) 54 Bhisti (Mixing / Curing) - Semi Skilled 55 Mukadam - Semi Skilled 56 Tar Handler - Semi Skilled 57 Helper Un Skilled 58 Mazdoor - Unskilled Heavy Male 59 Mazdoor - Unskilled Heavy Female 60 Below Boy 61 Laboratory Assistant 62 Labour for Tile Turning 63 Excavator - Unskilled Heavy 64 Breaker - Semi Skilled 65 Chiseler Semi Skilled 66 Foreman Skilled 67 Jack Hammer Operator 68 Labour for Traffic Regulation 69 Watchman 70 Compressor Operator / Driver 71 Supervisor / Mate 72 Mali 73 Medical Officer 74 Operator (grouting) 75 Junior Engineer 76 Surveyor 77 Autocad Operator 78 Attendent 79 Computer Typist 80 Tracer 81 Total Station Operator 82 Senior Engineer 83 Assistant 84 Operator / Fitter 85 Mazdoor Unskilled Light Male 86 Computer Operator 87 Survey Helper 88 Technician 89 Skilled Assistants-on the site 90 Supervisor 91 Valuation expert 92 Office support Staff 93 Co-ordinator 94 Senior Surveyor 95 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
26.
Rural Development #10389864 Price Bid
Providing and Supplying various different material and machinery and Labour services Bhagatwadi Road at Grampanchayat Jambhali Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
27.
Rural Development #10389819 Price Bid
Providing and Supplying various different material and machinery and Labour services Internal Road at Grampanchayat Sangrun Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
28.
Rural Development #10389817 Price Bid
Providing and Supplying various different material and machinery and Labour services Prathmik Arogy Kendra Fata to Gaikwad Wasti home road at Grampanchayat Sangrun Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
29.
Rural Development #10389814 Price Bid
Providing and Supplying various different material and machinery and Labour services Seetabai Mankar to Arun Mankar towards roadat Grampanchayat Sangrun Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
30.
Rural Development #10389812 Price Bid
Providing and Supplying various different material and machinery and Labour services Internal Road at Grampanchayat Sangrun Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
31.
Rural Development #10389809 Price Bid
Providing and Supplying various different material and machinery and Labour services Internal Road at Grampanchayat Sangrun Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
32.
Rural Development #10389806 Price Bid
Providing and Supplying various different material and machinery and Labour services main road Internal Road at Grampanchayat Sangrun Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
33.
Rural Development #10389805 Price Bid
Providing and Supplying various different material and machinery and Labour services Improvement Ptra Shed for Smshanbhumi parisar at Grampanchayat Sangrun Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 Hard mrum 7 Soft mrum 8 PCC M-10 9 concrete M-20 10 bricks 11 Plain Zinc Sheet 12 Plain Zinc Sheet 0.50 mm thick 13 MS Steel 14 Mild Steel 15 Water proof compound I.S 16 Neeru / Sanala 17 White Putty (Cement) 18 Texture Material 19 Cement paint 20 White Cement 21 G.I. Sheet (plain) 22 BWG 22 G.I. Sheet (plain) 24 BWG 23 G.I.Washers 24 G.I.Screw 50mm 25 G.I.Screw 25mm 26 G.I. Nut Bolt 27 Heavy duty interlocking concrete block 60mm thick gray 300 kg/sq.cm. 28 Aluminium Alloy plate 2mm thick 29 Aluminium sheeting fixed with encapsuled lens type reflective sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable. 30 Aluminium Section 31 Alluminium Screw 32 x 6 mm, 25 x 6 mm 32 Concealed locking arrangement of 100 mm length for sliding window 33 Alluminium Grill 7.50 mm thick 34 Exterior Primer 35 Tanker for water 36 JCB 37 Crane 38 Road Roller 39 Concrete mixer 40 Breaker 41 dumper 42 Tractor 43 Tractor Breaker 44 Inforamtion Board 45 Tractor Breaker 46 Labour Services Skilled Labour 47 Labour Services UnSkilled Labour 48 Black Smith With Tools - II Class 49 Stone Cutter With Tools - Semi Skilled 50 Mason I Class Skilled 51 Mason II Class Skilled 52 Mechanic 53 Lorry Driver / Mixer Operator 54 Welder / Driller - Skilled 55 Maistry Skilled / Supervisor / Mate 56 Vibrator Operator - Skilled 57 Skilled Labour 58 Boreman Skilled 59 Asphalt Sprayer Skilled 60 Minor or Blaster Semi Skilled 61 Quarry Man - Semi Skilled 62 Labour for Excavation in Hard Rock (Un Blast) 63 Bhisti (Mixing / Curing) - Semi Skilled 64 Mukadam - Semi Skilled 65 Tar Handler - Semi Skilled 66 Helper Un Skilled 67 Mazdoor - Unskilled Heavy Male 68 Mazdoor - Unskilled Heavy Female 69 Below Boy 70 Laboratory Assistant 71 Labour for Tile Turning 72 Excavator - Unskilled Heavy 73 Breaker - Semi Skilled 74 Chiseler Semi Skilled 75 Foreman Skilled 76 Jack Hammer Operator 77 Labour for Traffic Regulation 78 Watchman 79 Compressor Operator / Driver 80 Supervisor / Mate 81 Mali 82 Medical Officer 83 Operator (grouting) 84 Junior Engineer 85 Surveyor 86 Autocad Operator 87 Attendent 88 Computer Typist 89 Tracer 90 Total Station Operator 91 Senior Engineer 92 Assistant 93 Operator / Fitter 94 Mazdoor Unskilled Light Male 95 Computer Operator 96 Survey Helper 97 Technician 98 Skilled Assistants-on the site 99 Supervisor 100 Valuation expert 101 Office support Staff 102 Co-ordinator 103 Senior Surveyor 104 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
34.
Rural Development #10389715 Price Bid
Providing and Supplying various different material and machinery and Labour services main road to smashanbhumi kade janara rasta at Grampanchayat Mandavi kh Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
35.
Rural Development #10389713 Price Bid
Providing and Supplying various different material and machinery and Labour services gavantrgat gt nambar 366 bandhist guttar at Grampanchayat Mandavi kh Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 200mm NP2 pipe 8 250mm NP2 pipe 9 300mm NP2 pipe 10 450mm NP2 pipe 11 BB masonrey Rectangular cover 60X 45 frame cover 12 BB masonrey Circular cover 50cm dia at top 90 cm internal dia at bottom 13 PVC 110mm 4kg/cm etc 14 WBM carpet 15 soak pit 120cm X 120cm X 120cm 16 Aggregate 6 mm 17 Stone Dust 18 Soft Murum 19 Hard Murum 20 Sand - Crushed 21 Bricks II Class 22 Rubble stone excluding royalty 23 bricks 24 Tanker for water 25 JCB 26 Crane 27 Road Roller 28 Concrete mixer 29 Breaker 30 dumper 31 Tractor 32 Tractor Breaker 33 Inforamtion Board 34 Tractor Breaker 35 Labour Services Skilled Labour 36 Labour Services UnSkilled Labour 37 Black Smith With Tools - II Class 38 Stone Cutter With Tools - Semi Skilled 39 Mason I Class Skilled 40 Mason II Class Skilled 41 Mechanic 42 Lorry Driver / Mixer Operator 43 Welder / Driller - Skilled 44 Maistry Skilled / Supervisor / Mate 45 Vibrator Operator - Skilled 46 Skilled Labour 47 Boreman Skilled 48 Asphalt Sprayer Skilled 49 Minor or Blaster Semi Skilled 50 Quarry Man - Semi Skilled 51 Labour for Excavation in Hard Rock (Un Blast) 52 Bhisti (Mixing / Curing) - Semi Skilled 53 Mukadam - Semi Skilled 54 Tar Handler - Semi Skilled 55 Helper Un Skilled 56 Mazdoor - Unskilled Heavy Male 57 Mazdoor - Unskilled Heavy Female 58 Below Boy 59 Laboratory Assistant 60 Labour for Tile Turning 61 Excavator - Unskilled Heavy 62 Breaker - Semi Skilled 63 Chiseler Semi Skilled 64 Foreman Skilled 65 Jack Hammer Operator 66 Labour for Traffic Regulation 67 Watchman 68 Compressor Operator / Driver 69 Supervisor / Mate 70 Mali 71 Medical Officer 72 Operator (grouting) 73 Junior Engineer 74 Surveyor 75 Autocad Operator 76 Attendent 77 Computer Typist 78 Tracer 79 Total Station Operator 80 Senior Engineer 81 Assistant 82 Operator / Fitter 83 Mazdoor Unskilled Light Male 84 Computer Operator 85 Survey Helper 86 Technician 87 Skilled Assistants-on the site 88 Supervisor 89 Valuation expert 90 Office support Staff 91 Co-ordinator 92 Senior Surveyor 93 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
36.
Rural Development #10389711 Price Bid
Providing and Supplying various different material and machinery and Labour services Internal road at Grampanchayat Mandavi kh Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
37.
Rural Development #10389709 Price Bid
Providing and Supplying various different material and machinery and Labour services main road to smashanbhumi kade janara rasta at Grampanchayat Mandavi kh Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
38.
Rural Development #10389591 Price Bid
Providing and Supplying various different material and machinery and Labour services Tarade Gav to Gavatemala Internal road at Grampanchayat Tarade Tal Haveli Dist Pune - 2 40/60 mm Metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
39.
Rural Development #10389589 Price Bid
Providing and Supplying various different material and machinery and Labour services S H 9 to Eviniv Society Road at Grampanchayat Kadamwakwasti Tal Haveli Dist Pune - 2 40/60 mm Metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Paving Block 300kg/sqcm 80mm 34 Labour Services Skilled Labour 35 Labour Services UnSkilled Labour 36 Black Smith With Tools - II Class 37 Stone Cutter With Tools - Semi Skilled 38 Mason I Class Skilled 39 Mason II Class Skilled 40 Mechanic 41 Lorry Driver / Mixer Operator 42 Welder / Driller - Skilled 43 Maistry Skilled / Supervisor / Mate 44 Vibrator Operator - Skilled 45 Skilled Labour 46 Boreman Skilled 47 Asphalt Sprayer Skilled 48 Minor or Blaster Semi Skilled 49 Quarry Man - Semi Skilled 50 Labour for Excavation in Hard Rock (Un Blast) 51 Bhisti (Mixing / Curing) - Semi Skilled 52 Mukadam - Semi Skilled 53 Tar Handler - Semi Skilled 54 Helper Un Skilled 55 Mazdoor - Unskilled Heavy Male 56 Mazdoor - Unskilled Heavy Female 57 Below Boy 58 Laboratory Assistant 59 Labour for Tile Turning 60 Excavator - Unskilled Heavy 61 Breaker - Semi Skilled 62 Chiseler Semi Skilled 63 Foreman Skilled 64 Jack Hammer Operator 65 Labour for Traffic Regulation 66 Watchman 67 Compressor Operator / Driver 68 Supervisor / Mate 69 Mali 70 Medical Officer 71 Operator (grouting) 72 Junior Engineer 73 Surveyor 74 Autocad Operator 75 Attendent 76 Computer Typist 77 Tracer 78 Total Station Operator 79 Senior Engineer 80 Assistant 81 Operator / Fitter 82 Mazdoor Unskilled Light Male 83 Computer Operator 84 Survey Helper 85 Technician 86 Skilled Assistants-on the site 87 Supervisor 88 Valuation expert 89 Office support Staff 90 Co-ordinator 91 Senior Surveyor 92 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
40.
Rural Development #10389540 Price Bid
Providing And Supplying Various Labour Services For Construction One Room School Buildings At Grampanchayat Garade Tal Purandar Dist Pune - 1 Providing and Supplying Labour Services 2 Labour Services Skilled Labour 3 Labour Services UnSkilled Labour 4 Black Smith With Tools - II Class 5 Stone Cutter With Tools - Semi Skilled 6 Mason I Class Skilled 7 Mason II Class Skilled 8 Mechanic 9 Lorry Driver / Mixer Operator 10 Welder / Driller - Skilled 11 Maistry Skilled / Supervisor / Mate 12 Vibrator Operator - Skilled 13 Skilled Labour 14 Boreman Skilled 15 Asphalt Sprayer Skilled 16 Minor or Blaster Semi Skilled 17 Quarry Man - Semi Skilled 18 Labour for Excavation in Hard Rock (Un Blast) 19 Bhisti (Mixing / Curing) - Semi Skilled 20 Mukadam - Semi Skilled 21 Tar Handler - Semi Skilled 22 Helper Un Skilled 23 Mazdoor - Unskilled Heavy Male 24 Mazdoor - Unskilled Heavy Female 25 Below Boy 26 Laboratory Assistant 27 Labour for Tile Turning 28 Excavator - Unskilled Heavy 29 Breaker - Semi Skilled 30 Chiseler Semi Skilled 31 Foreman Skilled 32 Jack Hammer Operator 33 Labour for Traffic Regulation 34 Watchman 35 Compressor Operator / Driver 36 Supervisor / Mate 37 Mali 38 Medical Officer 39 Operator (grouting) 40 Junior Engineer 41 Surveyor 42 Autocad Operator 43 Attendent 44 Computer Typist 45 Tracer 46 Total Station Operator 47 Senior Engineer 48 Assistant 49 Operator / Fitter 50 Mazdoor Unskilled Light Male 51 Computer Operator 52 Survey Helper 53 Technician 54 Skilled Assistants-on the site 55 Supervisor 56 Valuation expert 57 Office support Staff 58 Co-ordinator 59 Senior Surveyor 60 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
41.
Rural Development #10389481 Price Bid
Providing and Supplying various Labour services Bhivaji Kunjir to Vikram Kunjir Houseat Grampanchayat Waghapur Tal Purandar Dist Pune - 1 Providing and Supplying Labour Services 2 Labour Services Skilled Labour 3 Labour Services UnSkilled Labour 4 Black Smith With Tools - II Class 5 Stone Cutter With Tools - Semi Skilled 6 Mason I Class Skilled 7 Mason II Class Skilled 8 Mechanic 9 Lorry Driver / Mixer Operator 10 Welder / Driller - Skilled 11 Maistry Skilled / Supervisor / Mate 12 Vibrator Operator - Skilled 13 Skilled Labour 14 Boreman Skilled 15 Asphalt Sprayer Skilled 16 Minor or Blaster Semi Skilled 17 Quarry Man - Semi Skilled 18 Labour for Excavation in Hard Rock (Un Blast) 19 Bhisti (Mixing / Curing) - Semi Skilled 20 Mukadam - Semi Skilled 21 Tar Handler - Semi Skilled 22 Helper Un Skilled 23 Mazdoor - Unskilled Heavy Male 24 Mazdoor - Unskilled Heavy Female 25 Below Boy 26 Laboratory Assistant 27 Labour for Tile Turning 28 Excavator - Unskilled Heavy 29 Breaker - Semi Skilled 30 Chiseler Semi Skilled 31 Foreman Skilled 32 Jack Hammer Operator 33 Labour for Traffic Regulation 34 Watchman 35 Compressor Operator / Driver 36 Supervisor / Mate 37 Mali 38 Medical Officer 39 Operator (grouting) 40 Junior Engineer 41 Surveyor 42 Autocad Operator 43 Attendent 44 Computer Typist 45 Tracer 46 Total Station Operator 47 Senior Engineer 48 Assistant 49 Operator / Fitter 50 Mazdoor Unskilled Light Male 51 Computer Operator 52 Survey Helper 53 Technician 54 Skilled Assistants-on the site 55 Supervisor 56 Valuation expert 57 Office support Staff 58 Co-ordinator 59 Senior Surveyor 60 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
42.
Rural Development #10389477 Price Bid
Providing and Supplying various Labour services Bhairvanth temple to Hanuman Kunjir Houseat Grampanchayat Waghapur Tal Purandar Dist Pune - 2 Labour Services Skilled Labour 3 Labour Services UnSkilled Labour 4 Black Smith With Tools - II Class 5 Stone Cutter With Tools - Semi Skilled 6 Mason I Class Skilled 7 Mason II Class Skilled 8 Mechanic 9 Lorry Driver / Mixer Operator 10 Welder / Driller - Skilled 11 Maistry Skilled / Supervisor / Mate 12 Vibrator Operator - Skilled 13 Skilled Labour 14 Boreman Skilled 15 Asphalt Sprayer Skilled 16 Minor or Blaster Semi Skilled 17 Quarry Man - Semi Skilled 18 Labour for Excavation in Hard Rock (Un Blast) 19 Bhisti (Mixing / Curing) - Semi Skilled 20 Mukadam - Semi Skilled 21 Tar Handler - Semi Skilled 22 Helper Un Skilled 23 Mazdoor - Unskilled Heavy Male 24 Mazdoor - Unskilled Heavy Female 25 Below Boy 26 Laboratory Assistant 27 Labour for Tile Turning 28 Excavator - Unskilled Heavy 29 Breaker - Semi Skilled 30 Chiseler Semi Skilled 31 Foreman Skilled 32 Jack Hammer Operator 33 Labour for Traffic Regulation 34 Watchman 35 Compressor Operator / Driver 36 Supervisor / Mate 37 Mali 38 Medical Officer 39 Operator (grouting) 40 Junior Engineer 41 Surveyor 42 Autocad Operator 43 Attendent 44 Computer Typist 45 Tracer 46 Total Station Operator 47 Senior Engineer 48 Assistant 49 Operator / Fitter 50 Mazdoor Unskilled Light Male 51 Computer Operator 52 Survey Helper 53 Technician 54 Skilled Assistants-on the site 55 Supervisor 56 Valuation expert 57 Office support Staff 58 Co-ordinator 59 Senior Surveyor 60 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
43.
Rural Development #10389463 Price Bid
Providing and Supplying various different material and machinery and Labour services Ramdara to Ballale Mala at Grampanchayat Lonikalbhor Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
44.
Rural Development #10389461 Price Bid
Providing and Supplying various different material and machinery and Labour services Sanjay Kalbhor House (Ashtapur Mala) to Milk Dairy road at Grampanchayat Lonikalbhor Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
45.
Rural Development #10389193 Price Bid
Providing and Supplying various different material and machinery and Labour services Marathi School towards Boudhwasti road at Grampanchayat Lonikalbhor Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 PCC M-10 8 concrete M-20 9 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 10 Aggregate 25 mm 11 Aggregate 20 mm 12 Aggregate 12 mm 13 Aggregate 10 mm 14 Aggregate 6 mm 15 Stone Dust 16 Soft Murum 17 Hard Murum 18 Sand - Crushed 19 Bricks II Class 20 Rubble stone excluding royalty 21 bricks 22 Tanker for water 23 JCB 24 Crane 25 Road Roller 26 Concrete mixer 27 Breaker 28 dumper 29 Tractor 30 Tractor Breaker 31 Inforamtion Board 32 Tractor Breaker 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
46.
Rural Development #10381605 Price Bid
Providing and Supplying various different material and machinery and Labour services Theur road to Maulinagar road at Grampanchayat Kolwadi-Sashte Tal Haveli Dist Pune - 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 Aggregate 8 Aggregate 25 mm 9 Aggregate 20 mm 10 Aggregate 12 mm 11 Aggregate 10 mm 12 Aggregate 6 mm 13 Stone Dust 14 Aggregates 20 mm nominal size 15 Aggregates 25 mm nominal size 16 Aggregates 40 mm nominal size 17 R.C.C.Np2 Pipe Collar 600 mm Dia. 18 bricks 19 Tanker for water 20 JCB 21 Crane 22 Road Roller 23 Concrete mixer 24 Breaker 25 dumper 26 Tractor 27 Tractor Breaker 28 Inforamtion Board 29 Tractor Breaker 30 Polished Shahabad 25 to 30mm thick 31 Stainless Steel Plate 32 Aldrop Stainless steel 300*16mm 33 Labour Services Skilled Labour 34 Labour Services UnSkilled Labour 35 Black Smith With Tools - II Class 36 Stone Cutter With Tools - Semi Skilled 37 Mason I Class Skilled 38 Mason II Class Skilled 39 Mechanic 40 Lorry Driver / Mixer Operator 41 Welder / Driller - Skilled 42 Maistry Skilled / Supervisor / Mate 43 Vibrator Operator - Skilled 44 Skilled Labour 45 Boreman Skilled 46 Asphalt Sprayer Skilled 47 Minor or Blaster Semi Skilled 48 Quarry Man - Semi Skilled 49 Labour for Excavation in Hard Rock (Un Blast) 50 Bhisti (Mixing / Curing) - Semi Skilled 51 Mukadam - Semi Skilled 52 Tar Handler - Semi Skilled 53 Helper Un Skilled 54 Mazdoor - Unskilled Heavy Male 55 Mazdoor - Unskilled Heavy Female 56 Below Boy 57 Laboratory Assistant 58 Labour for Tile Turning 59 Excavator - Unskilled Heavy 60 Breaker - Semi Skilled 61 Chiseler Semi Skilled 62 Foreman Skilled 63 Jack Hammer Operator 64 Labour for Traffic Regulation 65 Watchman 66 Compressor Operator / Driver 67 Supervisor / Mate 68 Mali 69 Medical Officer 70 Operator (grouting) 71 Junior Engineer 72 Surveyor 73 Autocad Operator 74 Attendent 75 Computer Typist 76 Tracer 77 Total Station Operator 78 Senior Engineer 79 Assistant 80 Operator / Fitter 81 Mazdoor Unskilled Light Male 82 Computer Operator 83 Survey Helper 84 Technician 85 Skilled Assistants-on the site 86 Supervisor 87 Valuation expert 88 Office support Staff 89 Co-ordinator 90 Senior Surveyor 91 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
47.
Rural Development #10381540 Price Bid
Providing Supplying And Erecting Various Material Machinery And Labour Services As Mentioned In Boq Shendkarwasti Rd At Gpaarvi(Jansuvidha) providing and supplying Material and Machinery and Labour Services 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 Hard mrum 7 PCC M-10 8 concrete M-20 9 bricks 10 Tanker for water 11 JCB 12 Crane 13 Road Roller 14 Concrete mixer 15 Breaker 16 dumper 17 Tractor 18 Tractor Breaker 19 Inforamtion Board 20 Tractor Breaker 21 Information board 22 soft murum 23 Labour Services Skilled Labour 24 Labour Services UnSkilled Labour 25 Black Smith With Tools - II Class 26 Stone Cutter With Tools - Semi Skilled 27 Mason I Class Skilled 28 Mason II Class Skilled 29 Mechanic 30 Lorry Driver / Mixer Operator 31 Welder / Driller - Skilled 32 Maistry Skilled / Supervisor / Mate 33 Vibrator Operator - Skilled 34 Skilled Labour 35 Boreman Skilled 36 Asphalt Sprayer Skilled 37 Minor or Blaster Semi Skilled 38 Quarry Man - Semi Skilled 39 Labour for Excavation in Hard Rock (Un Blast) 40 Bhisti (Mixing / Curing) - Semi Skilled 41 Mukadam - Semi Skilled 42 Tar Handler - Semi Skilled 43 Helper Un Skilled 44 Mazdoor - Unskilled Heavy Male 45 Mazdoor - Unskilled Heavy Female 46 Below Boy 47 Laboratory Assistant 48 Labour for Tile Turning 49 Excavator - Unskilled Heavy 50 Breaker - Semi Skilled 51 Chiseler Semi Skilled 52 Foreman Skilled 53 Jack Hammer Operator 54 Labour for Traffic Regulation 55 Watchman 56 Compressor Operator / Driver 57 Supervisor / Mate 58 Mali 59 Medical Officer 60 Operator (grouting) 61 Junior Engineer 62 Surveyor 63 Autocad Operator 64 Attendent 65 Computer Typist 66 Tracer 67 Total Station Operator 68 Senior Engineer 69 Assistant 70 Operator / Fitter 71 Mazdoor Unskilled Light Male 72 Computer Operator 73 Survey Helper 74 Technician 75 Skilled Assistants-on the site 76 Supervisor 77 Valuation expert 78 Office support Staff 79 Co-ordinator 80 Senior Surveyor 81 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
48.
Rural Development #10381536 Price Bid
Providing Supplying And Erecting Various Material Machinery And Labour Services As Mentioned In Boq Internalroad At Gpaarvi(Jansuvidha Vishesh Anudan) providing and supplying Material and Machinery and Labour Services 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 Hard mrum 7 PCC M-10 8 concrete M-20 9 bricks 10 Tanker for water 11 JCB 12 Crane 13 Road Roller 14 Concrete mixer 15 Breaker 16 dumper 17 Tractor 18 Tractor Breaker 19 Inforamtion Board 20 Tractor Breaker 21 Information board 22 soft murum 23 Labour Services Skilled Labour 24 Labour Services UnSkilled Labour 25 Black Smith With Tools - II Class 26 Stone Cutter With Tools - Semi Skilled 27 Mason I Class Skilled 28 Mason II Class Skilled 29 Mechanic 30 Lorry Driver / Mixer Operator 31 Welder / Driller - Skilled 32 Maistry Skilled / Supervisor / Mate 33 Vibrator Operator - Skilled 34 Skilled Labour 35 Boreman Skilled 36 Asphalt Sprayer Skilled 37 Minor or Blaster Semi Skilled 38 Quarry Man - Semi Skilled 39 Labour for Excavation in Hard Rock (Un Blast) 40 Bhisti (Mixing / Curing) - Semi Skilled 41 Mukadam - Semi Skilled 42 Tar Handler - Semi Skilled 43 Helper Un Skilled 44 Mazdoor - Unskilled Heavy Male 45 Mazdoor - Unskilled Heavy Female 46 Below Boy 47 Laboratory Assistant 48 Labour for Tile Turning 49 Excavator - Unskilled Heavy 50 Breaker - Semi Skilled 51 Chiseler Semi Skilled 52 Foreman Skilled 53 Jack Hammer Operator 54 Labour for Traffic Regulation 55 Watchman 56 Compressor Operator / Driver 57 Supervisor / Mate 58 Mali 59 Medical Officer 60 Operator (grouting) 61 Junior Engineer 62 Surveyor 63 Autocad Operator 64 Attendent 65 Computer Typist 66 Tracer 67 Total Station Operator 68 Senior Engineer 69 Assistant 70 Operator / Fitter 71 Mazdoor Unskilled Light Male 72 Computer Operator 73 Survey Helper 74 Technician 75 Skilled Assistants-on the site 76 Supervisor 77 Valuation expert 78 Office support Staff 79 Co-ordinator 80 Senior Surveyor 81 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
49.
Rural Development #10381534 Price Bid
Providing Supplying And Erecting Various Material Machinery And Labour Services As Mentioned In Boq At Ratan Nagar To Vadachi Vadiroad Gpaarvi(Ji Va Yo Vishesh Anudan) providing and supplying Material and Machinery and Labour Services 2 40/60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 Hard mrum 7 PCC M-10 8 concrete M-20 9 bricks 10 Tanker for water 11 JCB 12 Crane 13 Road Roller 14 Concrete mixer 15 Breaker 16 dumper 17 Tractor 18 Tractor Breaker 19 Inforamtion Board 20 Tractor Breaker 21 Information board 22 soft murum 23 Labour Services Skilled Labour 24 Labour Services UnSkilled Labour 25 Black Smith With Tools - II Class 26 Stone Cutter With Tools - Semi Skilled 27 Mason I Class Skilled 28 Mason II Class Skilled 29 Mechanic 30 Lorry Driver / Mixer Operator 31 Welder / Driller - Skilled 32 Maistry Skilled / Supervisor / Mate 33 Vibrator Operator - Skilled 34 Skilled Labour 35 Boreman Skilled 36 Asphalt Sprayer Skilled 37 Minor or Blaster Semi Skilled 38 Quarry Man - Semi Skilled 39 Labour for Excavation in Hard Rock (Un Blast) 40 Bhisti (Mixing / Curing) - Semi Skilled 41 Mukadam - Semi Skilled 42 Tar Handler - Semi Skilled 43 Helper Un Skilled 44 Mazdoor - Unskilled Heavy Male 45 Mazdoor - Unskilled Heavy Female 46 Below Boy 47 Laboratory Assistant 48 Labour for Tile Turning 49 Excavator - Unskilled Heavy 50 Breaker - Semi Skilled 51 Chiseler Semi Skilled 52 Foreman Skilled 53 Jack Hammer Operator 54 Labour for Traffic Regulation 55 Watchman 56 Compressor Operator / Driver 57 Supervisor / Mate 58 Mali 59 Medical Officer 60 Operator (grouting) 61 Junior Engineer 62 Surveyor 63 Autocad Operator 64 Attendent 65 Computer Typist 66 Tracer 67 Total Station Operator 68 Senior Engineer 69 Assistant 70 Operator / Fitter 71 Mazdoor Unskilled Light Male 72 Computer Operator 73 Survey Helper 74 Technician 75 Skilled Assistants-on the site 76 Supervisor 77 Valuation expert 78 Office support Staff 79 Co-ordinator 80 Senior Surveyor 81 Revenue expert
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
50.
Rural Development #10381463 Price Bid
Providing And Supplying Various Labour Services at Grampanchayat Malkhed Tal Haveli Dist Pune - 2 Skilled Labour 3 Unskilled Labour 4 Black Smith With Tools - II Class 5 Stone Cutter With Tools - Semi Skilled 6 Mason I Class Skilled 7 Mason II Class Skilled 8 Carpenter I Class Skilled 9 Carpenter II Class Skilled 10 Plumber With Tools - Skilled 11 Glazier With Tools - Skilled 12 Tin Smith With Tools - Semi Skilled 13 Painter I Class Skilled 14 Painter II Class Skilled 15 Head Fitter With Tools - Skilled 16 Mechanic 17 Lorry Driver / Mixer Operator 18 Welder / Driller - Skilled 19 Polishman - Semi Skilled 20 Assistant Plumber - Skilled 21 Maistry Skilled / Supervisor / Mate 22 Vibrator Operator - Skilled 23 Skilled Labour 24 Boreman Skilled 25 Asphalt Sprayer Skilled 26 Minor or Blaster Semi Skilled 27 Quarry Man - Semi Skilled 28 Painter / White Washer - Semi Skilled 29 Labour for Excavation in Hard Rock (Un Blast) 30 Tile Turner Semi Skilled 31 Mazdoor - For Polishing 32 Bar Bender Skilled 33 Bhisti (Mixing / Curing) - Semi Skilled 34 Mukadam - Semi Skilled 35 Tar Handler - Semi Skilled 36 Helper Un Skilled 37 Tree Cutter - Semi Skilled 38 Navaghani 39 Mazdoor - Unskilled Heavy Male 40 Mazdoor - Unskilled Heavy Female 41 Below Boy 42 Fitter With Tools I Class Skilled 43 Fitter With Tools II Class Skilled 44 Gun Man for Guniting 45 Laboratory Assistant 46 Labour for Tile Turning 47 Excavator - Unskilled Heavy 48 Breaker - Semi Skilled 49 Hole Driller Semi Skilled 50 Chiseler Semi Skilled 51 Foreman Skilled 52 Bandhani Semi Skilled 53 Emgraver for lettering Skilled 54 Frabi - Weld - Drilling 55 Khalashi / Diers 56 Jack Hammer Operator 57 Electrician 58 Welder Skilled 59 Labour for Traffic Regulation 60 Watchman 61 Compressor Operator / Driver 62 Supervisor / Mate 63 Blacksmith (1st Class) Welder / Plumber / Electrician. 64 Blaster (Stone Cutter) 65 Mali 66 Mazdoor / Dresser (Semi Skilled) 67 Mazdoor / Dresser Sinker B116 Skilled 68 Medical Officer 69 Operator (grouting) 70 Para Medical Personnel 71 Mazdoor unskilled female (light) 72 Painting Lettering Number 73 Junior Engineer 74 Surveyor 75 Autocad Operator 76 Attendent 77 Computer Typist 78 Tracer 79 Total Station Operator 80 Senior Engineer 81 Assistant 82 Operator / Fitter 83 Mazdoor Unskilled Light Male 84 Computer Operator 85 Survey Helper 86 Technician 87 Skilled Assistants-on the site 88 Supervisor 89 Valuation expert 90 Office support Staff 91 Co-ordinator 92 Senior Surveyor 93 Revenue expert 94 Welder
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
TenderDetail
Loading tenders