View Bid Results For Laboratory Enclosures And Accessories Tenders

We found 411 Bid Results related to laboratory enclosures and accessories tenders. You can find Contractor details who won laboratory enclosures and accessories tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–9 of 411 tenders matching your filters

Defence #11478095 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 8

Punjab View Result →

Public Administrative Department #11249892 Price Bid

Tender for Supplying, Lowering, Testing And Commissioning Of Vertical Type, Multistage, Totally Enclosed Water Filled Deep Well Submersible Pumping Set Complete I/C Connection Etc. As Reqdd Three Phase 5.0 Hp Having Discharge Of 108 Lpm Approx. At 92 M Head. , Supply, Installation, Testing And Commissioning Of Cubical Type Control Panel Board For Single Phase & Three Phase Submersible Pumping Set Of Following Rating Complete With Contactor, Relay , Mcb ,Condenser ,Voltmeter, Ammeter And Indication Lamp Etc Including Connections Etc As Reqd.D 5 Hp (Three Phase) , P&F Following Sizes Of Pvc Insulated & Pvc Sheathed Copper Conductor 3 Core Submersible Cable Confirming To Is.694/1990 Etc. As Reqd.C 3X4sq.Mm , Supply, Installation, Testing and Commissioning Of Hot Press Moulded Smc Panel/Canopy Box Of Size(Od) 920 Mm X 460 Mm X 260 Mm & (Id) 900 Mm X 450 Mm X250 Mm , Anti - Corrosive, Dust Proof, Rust Proof, Shock Proof , Self-Extinguishing Property , Resistant To Heat , Vermin Proof, Ultra Violet Stabilized, Pilfer Resistant, Suitable For Mounting 1 No. 3 Phase Starter, 1 No. 63 annual periodical maintenance 4 Pole Isolator And 1 No. 3 Phase Energy Meter, Socket For Outgoing Connection With Pilferage Proof Smc Door Duly Welded With S/S Handle Having Danger Logo On Its Outer Surface And With 1 No Hot Dip Galvanized Iron Stand For A Base Of Size 40 Mm X 40 Mm X 5 Mm And Height Of The Stand Is 600 Mm Including 300 Mm Height Below The Ground With Side Strip Of Size 25 X 5 Mm , Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.63A , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-4C*6 Sqmm , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc..Direct In Ground (75 Cm Below Ground Level) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required.63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal). , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Providing And Fixing 25 Mm X 5 Mm G.I. Strip On Surface Or In Recess For Connections Etc. As Required. , Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required , Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart/ Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer-In-Charge, Upto 90 Metre Depth Below Ground Level.(A)All Types Of Soil 300 Mm Dia , Rocky Strata Including Boulders 300 Mm Dia , Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart/ Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer -In-Charge, Beyond 90 Metre & Upto 150 Metre Depth Below Ground Level. Rocky Strata Including Boulders 300 Mm Dia , Providing, Lowering And Fixing/Placing In Vertical Position Ms Slotted Casing Medium ( B-Class) Pipe Of Following Size Conforming To Is 1239/3589 Part-I (2004) At All Depth, Both Ends Threaded As Required.C) 200Mm(Nominal Bore) , Providing, Lowering And Fixing/Placing In Vertical Position Ms Slotted Casing Medium ( B-Class) Pipe Of Following Size Conforming To Is 1239/3589 Part-I (2004) At All Depth, Both Ends Threaded As Required.C) 150Mm(Nominal Bore) , Providing, Lowering And Fixing/Placing In Vertical Position Ms Black Casing Medium ( B-Class) Pipe Of Following Size Conforming To Is 1239/3589 Part-I (2004) At All Depth, Both Ends Threaded As Required.C) 200Mm(Nominal Bore) , Providing, Lowering And Fixing/Placing In Vertical Position Ms Black Casing Medium ( B-Class) Pipe Of Following Size Conforming To Is 1239/3589 Part-I (2004) At All Depth, Both Ends Threaded As Required.C) B) 150Mm(Nominal Bore) , Supply, Lowering And Fixing Following Size Of G.I. Pipe (M-Class) I/C Cutting Threading On Both Sides Etc. Isi Marked Etc As Reqd.D) 50Mm(Nominal Bore) , Gravel Packing In Tubewell Construction In Accordance With Is: 4097,Including Providing Gravel Fine/ Medium/ Coarse, In Required Grading &Sizes As Per Actual Requirement, All Complete As Per Direction Of Engineer-In-Charge , Supplying And Fixing Following Sizes Of Insulated Steel Flexible Safety Rope For Holding Submersible Pump Set I/C Clips Etc Complete As Reqd.A 6 Mm , Development Of Tube Well In Accordance With Is : 2800 (Part I) And Is: 11189, To Establish Maximum Rate Of Usable Water Yield Without Sand Content (Beyond Permissible Limit), With Required Capacity Air Compressor, Running The Compressor For Required Time Till Well Is Fully Developed, Measuring Yield Of Well By V Notch Method Or Any Other Approved Method, Measuring Static Level & Draw Down Etc. By Step Draw Down Method, Collecting Water Samples & Getting Tested In Approved Laboratory, I/C Disinfection Of Tubewell, All Complete, Including Hire & Labour Charges Of Air Compressor, Tools & Accessories Etc., All As Per Requirement And Direction Of Engineer-In-Charge. , S & F Ms Clamp Made Up Of Iron Flat Of Size 50X6 Mm With 4 Nut Bolt For Holding The Gi Pipe Pipe As Reqd. 50 Mm , S & F Following Size Of G.I. Socket. As Reqd. 50M , S & F Following Size Of G.I. Elbow. As Reqd.. 50Mm , S & F Following Size Of G.I. Union. As Reqd.50Mm

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 1

Delhi View Result →

Defence #11200251 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

Punjab View Result →

Housing Urban and Rular Development #11175999 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Rajasthan View Result →

Tourism #11175186 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Goa View Result →

Educational and Research Institute #11161433 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 10

West Bengal View Result →

Housing Urban and Rular Development #11131913 AOC

Contract Date: Aug 26, 2025 Contract Value : ₹ 1.64 Lakh

Government Departments No of Bidders 3

West Bengal View Result →

Agriculture #10988522 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Rajasthan View Result →

Defence #10790289 AOC

Contract Date: Mar 27, 2026 Contract Value : ₹ 47.03 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 5

Andaman And Nicobar Islands View Result →

10.

Defence #10733972 AOC

Contract Date: Apr 24, 2026 Contract Value : ₹ 56.10 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 7

Gujarat View Result →

11.

Public Administrative Department #10720743 AOC

Tender For Supplying, Lowering, Testing And Commissioning Of Vertical Type, Multistage, Totally Enclosed Water Filled Deep Well Submersible Pumping Set Complete I/C Connection Etc. As Reqdd Three Phase 5.0 Hp Having Discharge Of 108 Lpm Approx. At 92 M Head. , Supply, Installation, Testing And Commissioning Of Cubical Type Control Panel Board For Single Phase & Three Phase Submersible Pumping Set Of Following Rating Complete With Contactor, Relay , Mcb ,Condenser ,Voltmeter, Ammeter And Indication Lamp Etc Including Connections Etc As Reqd.D 5 Hp (Three Phase) , P&F Following Sizes Of Pvc Insulated & Pvc Sheathed Copper Conductor 3 Core Submersible Cable Confirming To Is.694/1990 Etc. As Reqd.C 3X 6 Sq.Mm , Supply, Installation, Testing And Commissioning Of Hot Press Moulded Smc Panel/Canopy Box Of Size(Od) 920 Mm X 460 Mm X 260 Mm & (Id) 900 Mm X 450 Mm X250 Mm , Anti - Corrosive, Dust Proof, Rust Proof, Shock Proof , Self-Extinguishing Property , Resistant To Heat , Vermin Proof, Ultra Violet Stabilized, Pilfer Resistant, Suitable For Mounting 1 No. 3 Phase Starter, 1 No. 63 Annual Periodical Maintenance 4 Pole Isolator And 1 No. 3 Phase Energy Meter, Socket For Outgoing Connection With Pilferage Proof Smc Door Duly Welded With S/S Handle Having Danger Logo On Its Outer Surface And With 1 No Hot Dip Galvanized Iron Stand For A Base Of Size 40 Mm X 40 Mm X 5 Mm And Height Of The Stand Is 600 Mm Including 300 Mm Height Below The Ground With Side Strip Of Size 25 X 5 Mm , Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.63A , Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-4C*10 Sqmm , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc..Direct In Ground (75 Cm Below Ground Level) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required.63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal). , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Upto 35 Sq. Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Providing And Fixing 25 Mm X 5 Mm G.I. Strip On Surface Or In Recess For Connections Etc. As Required. , Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required , Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer-In-Charge, Up To 90 Metre Depth Below Ground Level.B) All Type Of Soil (300 Mm Dia.) , Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer -In-Charge, Beyond 90 Metre & Upto 150 Metre Depth Below Ground Level.B) Rocky Strata Including Boulders-300Mm , Providing, Lowering And Fixing/Placing In Vertical Position Ms Slotted Casing Medium ( B-Class) Pipe Of Following Size Conforming To Is 1239/3589 Part-I (2004) At All Depth, Both Ends Threaded As Required.C) 200Mm(Nominal Bore) , Providing, Lowering And Fixing/Placing In Vertical Position Ms Slotted Casing Medium ( B-Class) Pipe Of Following Size Conforming To Is 1239/3589 Part-I (2004) At All Depth, Both Ends Threaded As Required.C) 150Mm(Nominal Bore) , Providing, Lowering And Fixing/Placing In Vertical Position Ms Black Casing Medium ( B-Class) Pipe Of Following Size Conforming To Is 1239/3589 Part-I (2004) At All Depth, Both Ends Threaded As Required.C) 200Mm(Nominal Bore) , Providing, Lowering And Fixing/Placing In Vertical Position Ms Black Casing Medium ( B-Class) Pipe Of Following Size Conforming To Is 1239/3589 Part-I (2004) At All Depth, Both Ends Threaded As Required.C) B) 150Mm(Nominal Bore) , Supply, Lowering And Fixing Following Size Of G.I. Pipe (M-Class) I/C Cutting Threading On Both Sides Etc. Isi Marked Etc As Reqd.D) 50Mm(Nominal Bore) , Gravel Packing In Tubewell Construction In Accordance With Is: 4097, Including Providing Gravel Fine/ Medium/ Coarse, In Required Grading & Sizes As Per Actual Requirement, All Complete As Per Direction Of Engineer-In-Charge. , Supplying And Fixing Following Sizes Of Insulated Steel Flexible Safety Rope For Holding Submersible Pump Set I/C Clips Etc Complete As Reqd.A 6 Mm , Supplying And Fixing Following Rating, Double Pole, (Three Phase And Neutral), 415 V, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.63 A , 23.12-Development Of Tube Well In Accordance With Is : 2800 (Part I) And Is: 11189, To Establish Maximum Rate Of Usable Water Yield Without Sand Content (Beyond Permissible Limit), With Required Capacity Air Compressor, Running The Compressor For Required Time Till Well Is Fully Developed, Measuring Yield Of Well By V Notch Method Or Any Other Approved Method, Measuring Static Level & Draw Down Etc. By Step Draw Down Method, Collecting Water Samples & Getting Tested In Approved Laboratory, I/C Disinfection Of Tubewell, All Complete, Including Hire & Labour Charges Of Air Compressor, Tools & Accessories Etc., All As Per Requirement And Direction Of Engineer-In-Charge. , S & F Ms Clamp Made Up Of Iron Flat Of Size 50X6 Mm With 4 Nut Bolt For Holding The Gi Pipe Pipe As Reqd. 50 Mm , S & F Following Size Of G.I. Socket. As Reqd. 50M , S & F Following Size Of G.I. Elbow. As Reqd.. 50Mm , S & F Following Size Of G.I. Union. As Reqd.50Mm

Contract Date: May 07, 2026 Contract Value : ₹ 18.91 Lakh

Local Bodies No of Bidders 2

Delhi View Result →

12.

Defence #10694380 Price Bid

Tender For Construction Of 03 Nos Bore Well At Nsg Campus Manesar Gurgaon ( Haryana ) .; 1 Earth Work 2 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. 3 All Kinds Of Soil. 4 Cement Concrete ( Cast In Situ ) 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 6 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 10 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources ) 7 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For : 8 Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth And String Courses Fillets, Kerbs And Steps Etc. 9 Reinforced Cement Concrete 10 Reinforced Cement Concrete Work In Walls ( Any Thickness ) , Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 11 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natu- Ral Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 12 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) . 13 Providing And Fixing Tie Bolt, Spring Coil And Plastic Cone In Wall Shuttering Complete As Per The Direction Of Engineer-In-Charge. 14 20 Mm Dia.& 225 Mm Length 15 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. 16 Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 17 Flooring 18 52 Mm Thick Cement Concrete Flooring With Concrete Hardener Topping, Under Layer 40 Mm Thick Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Top Layer 12 Mm Thick Cement Hardener Consisting Of Mix 1:2 ( 1 Cement Hardener Mix : 2 Graded Stone Aggregate 6 Mm Nominal Size ) By Volume, Hardening Compound Mixed @ 2 Litre Per 50 Kg Of Cement Or As Per ManufacturerS Specifications. This Includes Cost Of Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 19 Finishing 20 6 Mm Cement Plaster Of Mix : 21 1:3 ( 1 Cement : 3 Fine Sand ) 22 Water Supply 23 Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. External Work 24 65 Mm Dia Nominal Bore 25 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) : 26 25 Mm Nominal Bore 27 Painting G.I. Pipes And Fittings With Two Coats Of Anti-Corrosive Bitumastic Paint Of Approved Quality : 28 65 Mm Diameter Pipe 29 Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) : 30 65 Mm Nominal Bore 31 Providing Push-On-Joints To Centrifugally ( Spun ) Cast Iron Pipes Or Ductile Iron Pipes Including Testing Of Joints And The Cost Of Rubber Gasket : 32 100 Mm Dia Pipes 33 Drainage 34 Providing M.S. Foot Rests Including Fixing In Manholes With 20X20x10 Cm Cement Concrete Blocks 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) As Per Standard Design : 35 With 20X20 Mm Square Bar 36 Supplying And Fixing C.I. Cover Without Frame For Manholes : 37 455X610 Mm Rectangular C.I. Cover ( Light Duty ) The Weight Of The Cover To Be Not Less Than 23 Kg 38 Rain Water Harvesting & Tubewells 39 Boring / Drilling Bore Well Of Required Dia For Casing / Strainer Pipe, By Suitable Method Prescribed In Is: 2800 ( Part I ) , Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart / Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer-In-Charge, Upto 90 Metre Depth Below Ground Level. 40 All Types Of Soil 41 300 Mm Dia 42 Rocky Strata Including Boulders 43 300 Mm Dia 44 Boring / Drilling Bore Well Of Required Dia For Casing / Strainer Pipe, By Suitable Method Prescribed In Is: 2800 ( Part I ) , Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart / Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer -In-Charge, Beyond 90 Metre & Upto 150 Metre Depth Below Ground Level. 45 Rocky Strata Including Boulders 46 300 Mm Dia 47 Gravel Packing In Tubewell Construction In Accordance With Is: 4097, Including Providing Gravel Fine / Medium / Coarse, In Required Grading & Sizes As Per Actual Requirement, All Complete As Per Direction Of Engineer-In-Charge. 48 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Erw ( Electric Resistance Welded ) Fe 410 Mild Steel Screwed And Socketed / Plain Ended Casing Pipes Of Required Dia, Conforming To Is: 4270, Of Reputed & Approved Make, Including Painted With Outside Surface With Two Coats Of Anticorrosive Paint Of Approved Brand And Manufacture, Including Required Hire & Labour Charges, Fittings & Accessories, All Complete, For All Depths, As Per Direction Of Engineer-In-Charge. 49 200 Mm Nominal Size Dia Having Minimum Wall Thickness 5.40 Mm 50 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Erw ( Electric Resistance Welded ) Fe 410 Plain Slotted ( Having Slot Of Size 1.6 / 3.2 Mm ) Mild Steel Threaded And Socketed / Plain Bevel Ended Pipe ( Type A ) Of Required Dia, Conforming To Is: 8110, Of Reputed And Approved Make, Having Wall Thickness Not Less Than 5.40 Mm, Including Painted With Outside Surface With Two Coats Of Anticorrosive Bitumestic Paint Of Approved Brand And Manufacture, Including Hire & Labour Charges, Fittings & Accessories, All Complete, For All Depths, As Per Direction Of Engineer -In-Charge. 51 150 Mm Nominal Size Dia 52 200 Mm Nominal Size Dia 53 Development Of Tube Well In Accordance With Is : 2800 ( Part I ) And Is: 11189, To Establish Maximum Rate Of Usable Water Yield Without Sand Content ( Beyond Permissible Limit ) , With Required Capacity Air Compressor, Running The Compressor For Required Time Till Well Is Fully Developed, Measuring Yield Of Well By V Notch Method Or Any Other Approved Method, Measuring Static Level & Draw Down Etc. By Step Draw Down Method, Collecting Water Samples & Getting Tested In Approved Laboratory, I / C Disinfection Of Tubewell, All Complete, Including Hire & Labour Charges Of Air Compressor, Tools & Accessories Etc., All As Per Requirement And Direction Of Engineer-In-Charge. 54 Providing And Fixing M.S. Clamp Of Required Dia To The Top Of Casing / Housing Pipe Of Tubewell As Per Is: 2800 ( Part I ) , Including Necessary Bolts & Nuts Of Required Size Complete. 55 200 Mm Clamp 56 Providing And Fixing Bail Plug / Bottom Plug Of Required Dia To The Bottom Of Pipe Assembly Of Tubewell As Per Is:2800 ( Part I ) . 57 150 Mm Dia 58 Mr Items 59 Charges For Conducting Geophysical Surface Resistivity Investigation For Tubewell Site Selection To Find Out Thickness Of Alluvial, Protential Zones, Water Quality Variation With Depth & Type Of Rig To Be Deployed. 60 Electrical 61 Supplying, Installation, Testing And Commissioning Of Multi Stage Submersible Pump Set, In Bore Well Complete Withcoupled Totally Enclosed Electric Motor Suitable For 415 Volt, 50 Hz, 3 Phase A. C. Supplyincluding Water Proof Jointing Of Cables. ( Excluding Lowering Charges, Lowering Charges Of Submersible Pumpset Included In The Item Lowering Of Column Pipe ) ( Horse Power Of The Motor , Stage , Lpm & Head Of The Submersible Pump Will Be Decided By Engg In Charge On Basis Of Yield Report Submitted By The Contractor ) 62 Providing And Loweringgi Pipes Class B Marked With Is: 1239 In 6 M Length, Including Threading And Welding With Flanges ( Heavy Duty ) On Both Sides, Jointing With Nuts And Bolts, Rubber Gaskets, Into Tube Wells And Testing Commissioing Etc. Complete In All Respects To The Satisfaction Of Engineer-In- Charge. ( Make :Isi Marked B Class Jindal Hisar / Tata / Prakash Surya / Swastik / Zenith Maked G.I. Pipe ) 63 50Mm Dia 64 65Mm Dia 65 Supplying And Laying Of One Numberflat Copper Conductor Submersible Cable Of Following Size Pvc Insulated And Pvc Sheathed Flat Copper Submersible Cable Of 1.1 Kv Grade Along Thelength Of Coloum / Delivery Pipe / In The Existing Masonry Open Duct / Along Wall Surface / Cable Tray / Loose For Connections / In Existing Pvc Casing / Capping Etc. As Required. ( Isi Marked Make Havells / Polycab / Finolex / Rr Kabel ) 66 3 X 4.0 Sqmm 67 Supplying & Fixing Nylon Rope 16Mm Dia Complete With Shackles For Fixing Of Pump Set During The Lowering Of Pumpset To Avoid Slippage Complete As Reqd . 68 Providing And Fixing Three Phasesubmersible Pump Controllers With Single Phase Preventer Submersible Motormodel Mug15fasd Make L&T Suitable Relay Rangeor Equivalent In Havells & Siemens In Existing Cubicle Panel Board Making Connections, Etc. As Required. ( Relay Range & Horse Power Of The Starterwill Be Decided By Engg In Charge On Basis Of Submersible Motor Capacity ) 69 Supply, Installation, Testing And Commissioning Of Outdoor Type Totally Enclosed, Dust And Vermin Proof, Pedestal Mounted Inspection Box / Junction Box Of A Suitable Size But Not Less Than 600 Mm Wide X 450 Mm Height X 450 Mm ( Deep ) Fabricated From 2 Mm Thick Crca Sheet Steel Having Front And Back Openable Doors With Locking Arrangement On Both Sides, Tapered Top ( Roof ) , Including Detachable Cable Gland Plate Made Of 3 Mm Thick Crca Sheet, Including Pre-Paint Treatment, Phosphating And Powder Coating By Approved Siemens Grey Paint, Earthing Stud, Danger Notice Plate Fixed, Complete As Required. The Feeder Pillar Should Be Complete With A Mounting Frame Made Of 50 Mm X 50 Mm X 6 Mm Angle Iron With 900 Mm Long Legs. The 4 Legs Of The Feeder Pillar Shall Be Erected On A Suitable Size 1:3:6 Cement Concrete ( 1:3:6 Cement; 3 Sand; 6 Graded Stones Of 20 Mm Size ) Pedestal Having 900Mm Of Depth ( 600Mm Below Ground & 300Mm Above Ground ) . 70 Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal / Coke And Salt As Required. 71 Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 72 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required. 73 Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 74 90 Mm Dia ( Od-90 Mm & Id-76 Mm Nominal ) 75 Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.Direct In Ground ( 75 Cm Below Ground Level ) In The Existing Trench Complete As Required. 76 90 Mm Dia ( Od-90 Mm & Id-76 Mm Nominal ) 77 The Road Crossings Of Power Cablethrough Trenchless Boring.Trenchless Boring Using Manual / Machine Moling Techniqueat 0.75 Metre Below The Ground Level For Following Size Pipes, Including Survey Of Under Ground Utilities, Excavation Of Pits, Moling With The Hole Size Not Exceeding 20% Of The Pipe Dia, Backfilling, Compaction And Restoration Of The Pits To Original Condition Etc. As Required.The Rates For Moling, As Indicated Are Inclusive Of Excavation Of Pits, Backfilling, Compaction Andrestoration Of The Pits To Original Condition. Any Damages Occurred To Other Utilities During The Moling Operation Shall Be Immediately Notified And Rectified By The Contractor Without Any Cost Implication To The Department. The Length Of The Hole ( Excluding The Sizes Of The Pits On Both Ends ) Shall Be Considered For The Measurement Of Moling Length. However, Intermediate Pits Will Consider In The Moling Length.I ) Upto 150 Mm Dia Dwc Hdpe / G.I. / Pvc 78 Supplying And Laying Of One Number Aluminium Conductor, Xlpe Insulated, Pvc Sheathed, Armoured Power Cable Of 1.1 Kv Grade , Confirming To Is : 7098 ( Part-1 ) 1988 Of Following Size In The Existing Rcc / Hume / Metal Pipe As Required. 79 3.5 X 35 Sq. Mm 80 Supplying And Laying Of One Number Aluminium Conductor, Xlpe Insulated, Pvc Sheathed, Armoured Power Cable Of 1.1 Kv Grade , Confirming To Is : 7098 ( Part-1 ) 1988 Of Following Size Direct In Ground Including Excavation And Refilling The Trench Etc As Required, But Excluding Sand Cushioning And Protective Covering. 81 3.5 X 35 Sq. Mm 82 Supplying And Laying Of One Number Aluminium Conductor, Xlpe Insulated, Pvc Sheathed, Armoured Power Cable Of 1.1 Kv Grade , Confirming To Is : 7098 ( Part-1 ) 1988 Of Following Size In The Existing Masonry Open Duct / Along Pole / Loose For Connections Etc As Required. 83 3.5 X 35 Sq. Mm 84 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required 85 3.5 X 35 Sq. Mm 86 Supplying And Making Cable Route Marker With Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Of Size 60 Cm X 60 Cm At The Bottom And 50 Cm X 50 Cm At The Top With A Thickness Of 10Cm Including Inscription Duly Engraved As Required. 87 Add 1.0633 Multiplying Factor For Gst On Dsr

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Haryana View Result →

13.

Defence #10689791 Price Bid

Operation, Repair And Maintenance Of Fire Fighting Equipments For The Year-2022-23 ( Sh: Maintenance On Routine Basis ) - 1 Sub Head - I Pumps & Motorspreventive Maintenance Of The Fire As Per Pump List Attached. The Agency Will Undertake The Maintenance Work Of The Pumps Only Through The Oem Or Oem Authorized Dealer. 2 Site, Model, Make, Primer Mover & Qty Of Pumps 3 Old Magzine -Up150 / 45 ( Kbl ) - Engine Driven - 01 Nos Up150 / 45 ( Kbl ) - Motor Driven - 02 Nos Cphm40 / 26 ( Kbl ) - Motor Driven - 01 Nos 4 Niranjan Auditoriumdsm80 / 36 ( Kbl ) - Engine Driven -01 Nosdsm80 / 36 ( Kbl ) -Motor Driven - 02Nosdb32 / 26 ( Kbl ) -Motor Driven -01 Nosdb50 / 16 ( Kbl ) -Motor Driven -02 Nos 5 New Building Dsm100 / 36 ( Kbl ) - Engine Driven -01 Nosdsm125 / 40 ( Kbl ) -Motor Driven - 01Nosrkb40 / 12L5 ( Kbl ) -Motor Driven -01 Nos 6 Nagrani Bk Db50 / 16 ( Kbl ) -Motor Driven -02 Nos 7 Total ( Pumps ) - 15 Nos 8 Scope Of Work Covered Under The Preventive Maintenece 9 One Visit In Each Three Months Will Be Made By An Oem ( Kbl ) Service Person With Priorintimation. 10 Twobreakdown Visits Included Under Amc. 11 Complete Check-Up Of The Pump Sets As Per Kbl Standards. 12 Check Free Rotation Of Pumps. 13 Check Tightness Of Casing Bolts, Foundation Bolts, And Grease Ms Fasteners. 14 Oil Levels, Grease In Bearings, Condition Of Bearing To Be Checked And Replenished If Required ( Spare Shall Be Provided By Deptt ) 15 Vibration, Noise, Bearing Temperature, Voltage, Speed And Pressure To Be Measured And Recorded. 16 Alignment Of Pump Set To Be Checked And In Case If Required Rectification To Be Carried Out And Readings To Be Recorded. 17 Coupling Bushes, Pins, Rubber Parts To Be Checked And To Be Replaced If Required. ( Spare Shall Be Provided By Deptt ) 18 Mechanical Seal Condition To Be Checked And Suitable Recommendations To Be Made. 19 Service Report Will Be Generated Afterevery Visit Recording Data Anddetails Of Above Checks. 20 Training Will Be Provided To Site Operators To Obtain Optimum Output & Lifeof Equipment. 21 Overhaulingof The Following Pump Including Dismentaling, Machining , Oiling , Greasing , Assembling & Installation At Site Includingloading And Unloading, To And Fro Transportation Ofpump From Nsg Campus Manesar To The Workshop. The Work Will Be Done Through The Oem Or Oem-Authorized Dealer Of The Pumps, And The Repair Work Will Be Given A Three-Month Warranty By The Oem / Authorized Dealer. Model & Make. 22 Up150 / 45 Or Dsm80 / 36 Or Rkb40 / 12L5.Kbl Make 23 Cphm40 / 26.Kbl Make 24 Db32 / 26 Or Db50 / 16.Kbl Make 25 Dsm100 / 36 Or Dsm125 / 40.Kbl Make 26 Replacement Of The Following Spare Parts Of The Existing Kbl Pump Up150 / 45 Kirloskar Make Main Fire Pump Driven By Electric Motor 90Kw / 120Hp Capacitywith A New One If Found Defective, Including Testing, Complete As Required, Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. Thework Of The Pumps Will Be Done Only Through The Oem Or Oem Authorized Dealer. 27 Mechanical Seal 28 Mechanical Seal Plate 29 Sleeve Moc-Bronze ( 17458Cq001012 ) 30 Set Of Gasket Moc- Non Asbestos 31 O- Ring Moc- Natural Rubber 32 Ball Bearing 2877 Moc-Ss ( X630900400000 ) 33 Wear Ring Moc-Bronze ( 1712021991012 ) 34 Rewinding Of ( From 12.5 Hp Up To 120 H.P. Three-Phase Capacity ) Electrical Motors Including All Necessary Material And Of The Same Characteristics As Original With Required Size Of Super Enameled Copper Wire And F Class Insulation Material Including Dismantling, Removing Of Burnt Wires, Cleaning Of Slots, Varnishing, Assembling, Greasing, Testing Etc. Complete As Required Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. Thework Of Rewinding Of Motors Will Be Done Only Through The Oem Or Oem Authorized Dealer. 35 Sub Head - Iifire Alarm System Sitc / Replacement Of Addressable Manual Call Point Complete As Required Through Authorised Dealer Or Oem ( Compatible With Est3 Or Equivalent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 36 Sitc / Of Addressable Photo Thermal Detector Complete With Mounting Base Complete As Read-Through Authorised Dealer Or Oem ( Compatible With Est3 Or Equivalent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 37 Sitc Of Intelligent Addressable Programmable Sounder Complete As Required Through Authorised Dealer Or Oem ( Compatible With Est3 Or Equivlent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 38 Sitc Of Addressable Fire Control Module Complete As Requiredthrough Authorised Dealer Or Oem ( Compatible With Est3 Or Equivlent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivqlent 39 Providing, Fixing, Testing & Commissioning Of 15Mm Dia Quartzoid Bulb Type Sprinkler Of Rating 68 Degree Centigrade With Required Accessories ( Pendant / Upright Sprinkler ) 40 Sitc Of Horn Cum Strobe Complete As Read-Through Authorised Dealer Or Oem . ( Compatible With Est3 Or Equivalent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 41 Sitc Of Wall Speaker 1.5 / 3 / 6 W Metal Box Ceiling / Wall Speaker Complete Etc. As Required Make - Honeywell / Bosch / Ahuja Or Equivalent 42 Dismantling , Cleaning & Re-Fixing Intelligence Detector , Hooter , Mcp & Riincluding Checking, Testing And Connection Etc. As Required. 43 Supply Installation Testing Commissioning Of Smps Device Compatible With Two Loop Firepanel Make Est3 Or Equivalent As Per Direction Of Engg In Charge . 44 Servicing , Commissioning And Reprogramming Of Existed Addressable Fire Alarm Panelcompatible With Est3 Etc. Complete As Required. 45 Sitc Of Protective Cover Locked With Plastic Tie / Metallic Wire Suitable For Addressable Manual Call Pointincluding Dismantling & Re-Fixing Mcp With Necessary Arrangements As Per Direction Of Engineer In Charge Make- Hensel Kg9001 / Honeywell Or Equivalent As Approved By Engg In Charge . 46 Sub Head Iii - Pipes & Assecories Supplying, Fixing, Testing & Commissioning Of Double Flanged Sluice Valve Of Rating Pn 1.6 With Non Rising Spindle, Bronze / Gun Metal Seat, Isi Marked Complete With Nuts, Bolts, Washers, Gaskets And Conforming To Is 780 Of Following Sizes As Required :300Mm 47 Dismantling And Reinstalling The Existing 150 Mm Non-Return Valve In Horizontal Alignment In The Fbc Pipeline, As Well As Providingadditional Quantity Of 150 Mm C Class Heavy Duty Ms Pipeconforming To Is 3589 / Is 1239, Including Welding, Fittings Such As Elbows, Flanges, Nuts, Bolts, Gaskets, Etc., Whichever Are Required To Complete The Work, Painting With Two Or More Coats Of Synthetic Enamel Paint On The Pipe Of The Required Shade, Testing And Commissioning, Etc., As Required. 48 Providing, Installation, Testing & Commissioning Of Water Curtain Nozzle 15 / 20 Mm Dia Nickel Chrome Plated Brass, Bspt, K-Factor As Per Design Consideration Complete As Required 49 Providing, Laying, Testing & Commissioning Of C Class Heavy Duty Ms Pipe Conforming To Is 3589 / Is 1239 Including Welding, Fittings Like Elbows, Tees, Flanges, Tapers, Nuts Bolts, Gaskets Etc. And Fixing The Pipe On The Wall / Ceiling Or On Pipe With Suitable Clamp / Support Frame And Painting With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade Complete As Required : 80 Mm Dia 50 Supplying And Fixing Single Headed External Yard Hydrant Valve With 1 No. 63 Mm Diainstantaneous Fm Gunmetal / Stainless Steel Coupling And Cast Iron Wheel, Isi Marked, Conforming To Is 5290 ( Type A ) With Blank Gunmetal / Stainless Steel Cap And Chain As Required 51 Single Headed Gunmetal 52 Supplying, Fixing, Testing And Commissioning Of Butterflyvalve Of Pn 1.6 Rating With Bronze / Gunmetal Seat Duly Isi Marked Complete With Nuts, Bolts, Washers, Gaskets Conforming To Is 13095 Of Following Sizes As Required : 53 80Mm 54 100Mm 55 150Mm 56 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 57 Supplying & Replacement Of Weather Proof Hose Cabinet Suitable For External Hydrant / Fbic Fabricated Out Of 2 Mm Thick Ms Sheet With 6 Mm Thick Glazed Glass Door In Front Having Locking Arrangement Having Provision For 02 Nos Rrl Hose Pipes & 01 Nos Nozzlemounted On Wall Or Raise Brick Platform & Duly Painted With Po Redexternally & White Internally With Synthetic Enamelled Paint , Sign Writingetc. Complete In All Respect As Required At Site& Having Min Dimension - 900Mm X 600Mm X 500Mm Deep . 58 Supplying And Fixing 63 Mm Dia, 15 M Long Rrl Hose Pipe With 63 Mm Dia Male And Female Couplings Duly Bound With Gi Wire, Rivets Etc. Conforming To Is 636 ( Type-A ) As Required : Gunmetal Make - Newage / Safex / Safegaurd / Essel / Lifegaurd 59 Providing & Fixing Of Pressure Switch In M.S. Pipe Line Including Connection Etc. As Required. Make Denfoss / Indfos / Sitzer 60 Providing & Fixing Flow Switch In Following Sizes M.S. Pipe Including Connection Etc. As Required. 150 Mm Diamakedenfoss / Indfos / Sitzer 61 Supplying And Fixing Undermentioned Item In Existingdrum & Bracket Arrangementcomplete Connection Etc. Asrequired 62 Water Hose Thermoplastic ( Textile Reinforced ) Type -2 As Per Is: 12585Size - 20 Mm Nominal Internal Dia X 30 Mtr Length Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. 63 20 Mm Nominal Internal Dia Gun Metal Globe Valve With Nozzle On Existing Water Hose With Ss Clampincluding Credit For Existing Gun Metal Globe Valve & Nozzle Material Which Will Be Retained By The Contractor Etc., Complete As Required. 64 Hose Reel Drum With Brackets Conforming To Is 884 Ms Construction Spray Painted In Post Office Red Including Credit For Exisitng Reel Drumwhich Will Be Retained By The Contractor. Etc. Complete As Required. 65 Fabrication Supply Installation Testing Commissioning Mscabinet Made Of 1.2Mm Thick Ms Sheet With4 Mm Thick Transparent Acrylic Sheet Double-Leaf Door On The Front Including Necessary Locking Arrangement Including Mounting On Wall, Suitable To Accommodate Different Typefire Extinguisher Duly Painted With Post Office Red Externally And White Internally With Synthetic Enamel Paint Without Back Cover Including Dismantling & Refixing The Existing Fire Extinguisher Completely Required As Per Direction Of Engineer-In-Charge ( Min Depth 250Mm ) As Per Site Condition For A Fire Extinguisher As Required. 66 Providing & Fixing Msclamp Suitable For Existing Fire Extinguisher ( Dry Powder 06 Kg / Water Spray 09 Ltr / Co2 Type 4.5 Kg ) 67 Sub Head Iv - E &M Workearthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal / Coke And Salt As Required. 68 Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 69 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required. 70 Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal / Coke And Salt As Required. 71 Providing And Fixing 25 Mm X 5 Mm Copper Strip In 40 Mm Dia G.I. Pipe From Earth Electrode Including Connection With Brass Nut, Bolt, Spring, Washer Excavation And Re-Filling Etc. As Required 72 Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required 73 Sitc Of Wall Fan 400 Mm Sweep Oscillating Type Having Aerodynamically Designed & Balanced Blade Complete With All Accessories Such As Front Cover, Mounting Accessories I / C Connection Etc. As Reqd.Havells Dzire 400 Or Equivalent In Crompton / Usha 74 Wiring For Submain Wiring Along With Earth Wire With Following Size Of Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recess Medium Class Pvc Conduit As Reqd 75 2X1.5 Sqmm + 1X1.5 Sqmm Earth Wire 76 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 3 Pin 5 / 6 A Modular Socket Outlet And 5 / 6 A Modular Switch, Connections Etc. As Required. 77 Providing And Fixing Following Switch Gears, Meters And Accessoriesin Existing Cubicle Panel / Starter Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. 78 3Pole, 415V , Power Contactor Ac3 Rating 18 A 79 3Pole, 415V , Power Contactor Ac3 Rating 25A 80 3Pole, 415V , Power Contactor Ac3 Rating 32A 81 3Pole, 415V , Power Contactor Ac3 Rating 70A 82 3Pole, 415V , Power Contactor Ac3 Rating 110 A 83 Overload Thermal Relay Mn2 L&T 9-15A 84 Overload Thermal Relay Mn2 L&T 14-23A 85 Overload Thermal Relay Mn5 L&T 66-110A 86 Add On Block 2No+2Nc 87 Add On Block 1No+1Nc 88 Sub Head V - Fire Fightingequipmentssupply, Installation, Testing And Commissioning Of Ul Listed Abc Map-90% ( Mono Ammonium Phosphate ) Automatic Ceiling Mounted Fire Extinguisher For Oil Charged Transformer Rooms, Capacity 10 Kg, Applicable Fire Classes A, B & C, Ugts Pressure Gauge, Brass Forged Sprinkler Valves With Nozzle And Equipped With Pressure Gauge, External Coating Pure Polyester And Internal Epoxy Polyester Powder Coated, Heat Sensitive Glass Bulb Of 68°C. Make : Firemech / Ceasefire / Minimax / Kanex 89 Providing And Fixing Dry Powder ( Stored Pressure ) Type Portable Fire Extinguisher Of Following Capacity With Mono Ammonium Phosphate Powder 90 % Applicable To Fire Class A, B, C Controllable Discharge Mechanism With Epdm Hose And Nozzle, Ugts Pressure Gauge, Deep Drawm With Mig Welding Technology , External Pure Polyester & Internal Epoxy Polyester Powder Coated , Brass Forged Valves With Safety Pin Of Ss Material And Welding Procedure Approved By Tpi Rating As Per 15683 And Isi Mark With Suitable Fixing Bracket ( Ms ) Etc. As Reqd .Make -Ceasefire / Minimax / Kanex 90 6 Kg Powder Stored Pressure Type 91 Providing And Fixing Co2 Type ( High Pressure ) Type Portablefire Extinguisher Of Following Capacity With Co2 Gas Foo Fire Class B & C Electrical Discharge Controlmechanism Fitted With High Pressure Steel Braided Discharge Nozzle For Dispersed Discharge Of Co2 Enamel Spray Painting Powder Coated Handle , Hot Spinning Seamless Isi Marked Rating As Per Is 15683 With Suitable Fixing Bracket ( Ms ) Etc. Complete As Reqd Make - Ceasefire / Minimax / Kanex 92 4.5 Kg Co2 Portable Fire Extinguisher Type 93 Sub Headvi - Miscellaneous Worksitcdiesel Engine Manual Start ( Air Cooled ) Driven Make Kirloskar Taf1 / Greeves / Field Marshal ( With Std Manual Starting ) Or Equivalent Flexiblly Coupled With Self Priming Pump Kirloskar Sp3l Or Equivalent In Crompton / Wilo , Suction- 80Mm Delivery - 80Mm Mounted On Movable Trolley Fabricated Out Of C Channel Complete With Solid Wheel With Movable Handle Arrnagement & Side Open Canopy Of Ms Sheet. [ Warranty -01 Year ] 94 Supplying, Installation, Testing & Commissioning Of 600 Kva, 50 Hz, Servo Motor Operated Line Voltage Corrector, Copper Wound, Indoor, Continuous Duty, Three Phase, Suitable For 3 Phase Unbalanced / Balanced Input Voltage And Unbalanced / Balanced Load Conditions, Which Shall Comprise Three Nos. Fully Ic Controlled Sensing Circuits Microprocessor Based, With Built-In Filters To Improve The Output Wave To Be Pure Sinusoidal And Control Each Phase Individually. Conforming To Is 9815:1994 With Input Voltage 300-460V Output 415 ( As Set Output Voltage ) , + -1%, Naturally Oil Cooledwith First Filling Of Transformer Oiland Necessary Bypass Arrangements, Ms Tank Enclosure Mounted On Wheels, Withdigital Display Having Facilities To Show Fault Indication, Manual / Auto Indication, Manual / Auto Selection Switch, Output Voltage Increase / Decrease Switch, Input / Output Voltage Indication, Load Current Indication, Including Dismantling And Credit For The Existingkva Stabilizer With Transformer Oil. The Stabiliser Should Be Guaranteed For 12 Months From Commissioning For Any Manufacturing Defects. In The Event Of Any Failure Within The Above Period, Replacements Or Rectification Of Parts Shall Be Free Of Cost. The Quoted Rate Should Include Credit For Existing600 Kva Stabilizer With Transformer Oil Which Will Be Retained By The Contractor. ( Make-Vinitec Electronic Laboratory / Precision Control Instruments / Selvon Instruments Pvt. Ltd / Automatic Electric ( Ae ) ) / Purevolt ) 95 Sitc Oflead Acid Battery 150Ah, 12V Including The Dismantling Of Existing Battery, Including Credit For Existing Unserviceable Battery Of The Same Rating Which Will Be Retained By The Contractor Etc., Complete As Required. [ Warranty-36Month ] Make -Exide Xp1500 Or Equivalent In Amaron & Luminuous . 96 Sitc Of 7Ah, 12 V, Vrla Maintenance-Free Battery Including The Dismantling Of Existing Battery, Including Credit For Existing Unserviceable Battery Of The Same Rating Which Will Be Retained By The Contractor Etc., Complete As Required. [ Warranty-36Month ] Make -Exide12bv7b Or Equivalent In Amaron & Luminuous . 97 Supplying & Fixing Pvc Suction Hose Pipe Isi Marked Size 75 / 80Mm ( Make Texmo Code - A0695 Or Equivalent 98 Providing & Fixing Cast Ironfoot Valve Size 80 Mm To End Of Pvc Hose Suction Pipe Etc. Complete As Required ( Make - Kirloskar / Sant / Cri / Kartar )

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Haryana View Result →

14.

Housing Urban and Rular Development #10584119 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Uttar Pradesh View Result →

15.

Health and Family Welfare #10551414 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Rajasthan View Result →

16.

Health and Family Welfare #10551411 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Rajasthan View Result →

17.

Heavy Industries and Public Enterprises #10547140 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 5

Uttar Pradesh View Result →

18.

Drinking Water Supply and Sanitation #10523073 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 8

Uttar Pradesh View Result →

19.

Drinking Water Supply and Sanitation #10490367 Price Bid

Nit No. 18(21-22)/Cwa(Wns)Ii Hp/Item No. 01 Sitc Of Fume Hood X 1, Body Shower And Eye Shower For Quality Control Laboratory, Haiderpur (Iso-9001-2015 Certified). , Ducted High Performance Fume Hood Specifications A Fume Hood Sometimes Called A Fume Cupboard Or Fume Closet Is A Type Of Ventilation Device That Is Designed To Limit Exposure To Hazardous Or Toxic Fumes In Lab Environment. It Bypasses All Toxic Fumes From Lab By A Duct. Internal Material Of Fume Hood Is Made By 6 Mm Phenolic Resin Laminate Which Has A Very Good Chemical Resistance Properties And Outer Body Also Made By Gi Sheet With Epoxy Powder Coating. The Size Of Fume Hood Varies As Per The Requirement Of User And It Starts From 1200Mm, 1500Mm, 1800Mm And So On. Internal Size Also Varies In Same Manner. Moc Also Can Be Changed As Per The Criticality Of Chemicals That A User Is Using In Their Labs. In Conclusion We Can Shay That Fume Hood Is Safety Equipment Which Is Necessary For A Lab To Make A Healthy Environment. Overall Dimensions With Base Cabinet:1800 Mm W X 1000 Mm D X 2400 Mm H Fume Hood Dimensions: 1800 Mm W X 1000 Mm D X 1555 Mm H Base Cabinet Dimensions: 860 Mm W X 600 Mm D X 655 Mm H With Castors – 2Nos Inside Fume Hood Working Volume: 1740 Mm W X 750 Mm D X 1180 Mm H Bed Size:1740 Mm W X 750 Mm D Quantity: 1. Model - High Performance Fume Hood 2. Design Basis-American Design Standard: Ashrae110-2016 All Tests Including “Tracer Gas Containment Test” Passed. European Design Standard: En-14175- 2003 ‘Inner Plane Containment Test’ Passed. 3. Design Structure-Aerodynamic, Floor Mounted 4. Airflow Type-Low Constant Volume (For A.C. Environment) 5. Colour Combination-(May Select As Per Our Standard Colour List) 6. Powder Coating -Complete Metallic Parts Are Processed With Multi Tank Pre- Treatment And Finished With Highly Corrosion Resistant Kansai Nerolac/Equiv Epoxy Powder Coating With 70 - 80 Microns Thickness. Our Automatic Coating Plant And Fully Conveyorized Ovan Ensures That Coating Surface Get Appropriate Temperature To Bond With The Surface. The Paint Surface Was Tested For Quality And Longevity Out Of Which 1000 Hours Salt Spray Test Is Important Factor. 7. Material Of Construction Of Superstructure-Galvanized Iron (Gi) As Per Is 277: 2003 Standard Of • 1.0 Mm Thickness For All Sheet Metal Paneling • 1.2 Mm For Back Pillars • 1.2 Mm For Front Corner Post 8. Front Top Panel -Easily Openable Hinged Gas Spring Based Top Panel For Easy Access To Flow Control Valve And Electrical Lighting Fixtures For Maintenance. 9. Corner Post -Triangular Profiled Corner Post Is Placed On Lhs And Rhs Of The Fume Hood And It Houses The Utility Line Fittings And Electrical Receptacles. 10. Inside Liner -Chemical & Heat Resistant, Fire Retardant, Smooth Finish, Easily Cleanable Panels Made Out Of Durable Prl Integral Work Walls (6 Mm Thick). Astm Flame Spread Index < 25. 11. Active Kinetics Exhaust System -Interstitial 7-Point Active Kinetics Exhaust System (For Light, Normal & Heavy Fumes) With Baffle To Ensure Rapid Exhaust Of Fumes. 12. Airfoil -Aerodynamic Design, Horizontal Fixed Airfoil Mounted On The Worktop Made Of Ss 304 (1.2Mm) Teflon Coated. 13. Worktop -Chemical Resistant Splash & Spillage Proof Dished ‘Jet Black Granite’ Worktop (18 +1 Mm Thick). Skirting Of 15 Mm From All Sides For No Chemical Spillage. 14. Sink, Water Tap With Drain Arrangement -Worktop Will Have Sink Sealed With Silicon Sealant For Drainage With Water Tap On Left Back Side Of Worktop. Sink Will Have A Trap For Waste Collection. Oval Shaped 100 Mm X 200 Mm Sink 15. Sash (Shutter) -Vertical/Combinational Rising Sash Counter-Balanced With Pulley And Counter-Weight System. Toughened Float Glass Sash (5 Mm Thick). Smooth And Light Sash Operation. Clear Openable Height = 750 Mm. Impact Resistance Of The Sash (Toughened Glass) Is Four Times Higher Than Other Sash Materials (Like Safety Glass And Polycarbonate). Breaking Stress Value For Fully Toughened Glass (Tempered Glass) = 24,000 Psi. • Aerodynamic Sash Handle • Single Finger Movement • Timing Belt For Movement 16. Wet & Dry Services Valves-Remotely Operated Colour Coded Valves For Fine Control Over Utilities (As Per Din 12920 Norms) Total 5 Nos. Service Valves With Flexible Hose With 6Mm Internal Dia, Withstands Up To 5Kgf Pressure (All Lhs) • 1 For Raw Water (Pu) • 1 For Vacuum(Teflon) • 1 For Comp. Air (Pu) • 1 For Chilled Water Supply (Cws) • 1 For Chilled Water Return (Cwr) – No Valve Only Nozzle 17. Maintenace Ports -Openable Top Panel For Easy Maintenance Of Tube Light And Flow Control Valve. Rectangular Service Panel For Maintenance Of Utility Valves And Tubing. 18. Internal Nozzles-Brass Powder Coated Fittings Are Staggered In The Fume Hood To Avoid The Intermingling Of The Flexible Tubes. Also, The Taps Are Tapered In Shape To Use With Flexible Tubing Of Sizes From ¼” To ½” In Dia, To Provide Greater Flexibility To The User. 19. Lighting -Fluorescent Light (40 Watt, 2 Nos.) With Vapour-Proof Fitting For Proper Illumination. Intensity Approx 400 Lux At Worktop Level. Diffused Light Only, No Direct Lighting. 20. Electrical Utilities- 6 Nos. Electrical Sockets ‘North-West’ Make (230 V, 6/16 A, 50 Hz), 6 Nos. ‘North-West’ Make Mcbs. Light Switch On Front Fascia. Cables & Wires ‘Fire Retardant Low Smoke’ Grade. Emergency Stop Push Button For Fume Hood Switches. 21. Cable Entering Port -Dia 100 Mm Cable Entry Tunnel From Fume Hood Front Post To Inner Liner. With A Plastic Cover. For Easy Access Of Cables From Fume Hood To Electrical Sockets. 22. Chemical Storage Base Cabinet (Ventilated & On Castors) Base Cabinet Will Be Ready To Receive The Fume Hood At Its Top. It Will Have Following Features: 1) Completely Made From 1Mm Thick Gi Sheet With Highly Corrosion Resistant Epoxy Powder Coating,60-80 Microns Thickness. 2) Cabinet Integral Work Walls Will Be Special Chemical & Heat Resistant, Smooth Finish, Easily Cleanable Panels Made From Durable Prl Sheets. 3) Two Exhaust Ports Connected To The Fume Hood Exhaust System Internally. 4) One Removable Horizontal Partition To Store Chemicals. 5) Pp Trays For Chemical Storage. 6) Cabinets On Castors. 7) Roller Catch Of “Hafele”– Germany” Make For The Base Cabinet Doors. 8) Polyamide Hinges From Outside Of Base Cabinet.Overall Dimensions: 860Mm(W) X 600Mm(D) X 655Mm(H) With Castors – 2Nos. 23. Apparatus Holding Grid (Lattice Assembly)- A Grid Made Up Of Epoxy Powder Coated Rod (Dia. 12.7 Mm) To Hold The Apparatus. It Will Cover The Entire Length Of The Fume Hood And Will Be Built-In At Fume Hood Backside. Installed At The Distance Of 150 Mm From Backside Of Fume Hood. 24. Air Flow Meter -This Device Is An Accessory For Fume Hood To Indicate The Approximate Face Velocity Of Airflow With Primary Purpose Of Warning When A Low Flow Condition Occurs. Red & Green Leds Correspond To Low & Normal Flow Rates. When Flow Decreases From Normal To Low, An Audible Alarm Will Also Actuate Requiring Manual Acknowledgement For Silence. Digital Display Of Face Velocity In M/Sec Or Fpm. On Screen Display For Safe And Alarm Conditions With Audible Alarm And Led Indication. Push Button Calibration And Configuration. Plug-In Connections For Power Supply And Airflow Sensor 25. Temperature Indicator -Size 48 X 48 X 110, Mm (Panel Cutout - 44 X 44 Mm). Accuracy ±0.25% Of Reading ±1 Lsd, ±1°C Supply Voltage 85 To 264 V Ac, 50 / 60 Hz User Interface Display: 2 Rows Of 3-Digit X 7 Segment High Intensity Led Upper Row : Process Value For Pid 1 Lower Row: Process Value For Pid 2 Key Board: 3 Front Panel Keys For Settings 26. Level Adjusting Screws -Made Of Ss Bolts To Adjust The Fume Hood Level By ± 10 Mm 27. Exhaust Port -Unique Exhaust Port Design Ensures That The Fumes Will Be Exhausted Smoothly Without Any Turbulence At The Exhaust Port. Also, It Ensures Low Noise Level. 28. Flow Control Valve -To Regulate Airflow. 29. Noise Level - < 70Db At 1 Meter From Fume Hood. 30. Sash Lock -At 450 Mm To Restrict Movement Of Sash 31. Face Velocity -Should Pass Ashrae 110: 2016 Test At 60 Fpm 32. Drawer -Drawer Within The Fume Hood Structure To Keep Stationery 33. Pull Out Tray -For Keeping Notebook 34. White Board -300 Mm X 450 Mm White Board For Writing Centrifugal Blower: (For Air Suction In Cluster Of - Nos. Of 6 Ft. Fume Hood & - No. Of Spot Extractor) Silent Pp + Frp High Efficiency Remote Blower, Consisting Of Continuous Rating Motor And Chemical Resistant Impeller. It Satisfies International Safe Velocity Norms. 1. Construction-Sisw Type, Chemical & Heat Resistant Pp + Frp Blower With Aerodynamically Balanced Pp Impeller, With Drain Plug. 2. Air Suction Capacity -2400 Cfm Confirming To International Face Velocity Norms And As Per Safe Fume Hood Airflow Pattern. 3. Motor-‘Crompton / Lhp/Other Reputed’ Make, --Hp Motor 3 Phase Tefc, Ip 55, Class F, Continuous Rating. As Per Is 325. 4. Drive -Direct Drive Ducting: Chemical Resistant Pp + Frp (3Mm + 2Mm) Rigid & Flexible Ductwork From Fume Hood To Exhaust Stack Point With Weatherproof Canopy. Total Ducting With Horizontal, Vertical Members, Flanges, Bends, Bracketed Supports And Gooseneck Exhaust Stack. Installation : It Will Be Carried Out By Skilled Team With Ductwork Design, Fitting, Fixing Of Blower, Commissioning & Testing Of The Same At A Fixed Extra Cost Testing: All Fume Hoods Should Be “Factory Tested” As Per Ashrae110:2016 Face Velocity Norms. Also, “Onsite Validation” To Be Carried Out To Ensure Working Of Fume Hood As Per International Norms. “Tracer Gas Containment Testing’ Can Be Carried Out At Vendor’S Factory. , Supply Of Body & Eye Shower With Glass Bathing Enclosure And Ss Frame The Vendor Shall Provide Overhead Safety Shower Integrated With Eye Washer And Fume Hood With Installation And Also Do The Necessary Civil And Well As Wiring Work In A Scientific Required Manner. Specifications For Safety Shower Enclosed In Glass Shower Enclosure There Shall Be Safety Shower Cum Eye Washer For Decontamination Of Body In Case Of Any Toxic Or Chemical Contamination. It Shall Be Dual Operation With Hand Or Foot. The Same Will Be Enclosed In Glass Enclosure With Proper Water Supply System And Drainage System. The Height Of Shower And Bowl Will Be Adjustable. Material Of Construction: Shower: Ss 304 Basin Bowl: Ss 304 Shower Foundation: Ss 304 Filter Screens: Ss 304 Activation Push Plates: Ss 304 Piping: Ss 304 Waste Strainer: Ss 304 Water Flow Atomizer: Abs Dimensions: A. Total Height: 2445+-30Mm B. Shower Height 2100-2400Mm C. Eyewash Height 850-1150Mm D. Shower Bowl: 10.5/8” E. Eye Water Bowl: 11” F. Piping: ¾” Wall Thickness 2.5-3Mm G. Inlet: 1” Bsp, Outlet ¾” H. Ss Push Plate: 2 Mm Thickness I. Ss Pull Rod: 6 Mm Thickness J. Foundation Diameter: 165 Mm Water Flow: 1. Inverted Directional Laminar Flow. 2. Protects Nasal Cavity. 3. Filter Capsule Prevents Water Clogs For Uninterrupted Water Flow. 4. Attached Dust Cover (Ppcp). 5. Provided With Filter Capsule With Flow Controller (Pressure Range: 2.1-3Kgf/Cm2). 6. Provided With Ss Filter Screen To Protect From Unwanted Impurities. 7. Additional Flow Controller For Pressure Higher Than 3Kgf/Cm2 8. Under Conditions Of Adequate Pressure, Minimum Flow 11 L/Min. Receptor Bowl: 1. Straight Edged And Raised Basin To Prevent Splashing. 2. Ss Bowl Valve Equipped With Ss Ball And Steam Ss .304 (1/2 For Eyewash, 1For Shower). Drainage System: There Will Be A Rectangular Ss Drain Platform With Perforation. The Same Will Be Minimum 60% Of The Area Of The Enclosure Platform. This Is Need In An Scientific Manner To Flush Out The Water From The System In Seconds. Glass Enclosure: The Above Safety Shower Cum Eye Washer Will Be Enclosed In U Type-Glass Enclosure So At The Time Of Decontamination No Spill Spread Takes Place. The Glass Enclosure Will Have Tiles Of Good Quality At The Back Side And Three Side Glass That Include Gate (U Type). All Glass Will Be Toughened. Glass Thickness: 10 Mm Toughened (Tufnik Or Jaguar) Glass Door: 2135 Mm X 750 Mm (Minimum) Glass Enclosure Dimensions: 1066 Mm Width X 1220 Mm Depth X 2133 Mm Height Fittings, Hinges And Towel Bar Handle, L Connectors: Tufnik Or Jaguar Shower Cubical Size: As Per Site Requirement Over-Head Tank: 1000 Ltr (Syntex) Water Supply Fittings: Will Be Pp (Astral) Drain Pipes: Pvc (Astral/Prince) Installation Of Safety Shower And Fume Hood With Ducting, Electric Connections And Plumbing And Required Civil Work: It Will Be Carried Out By Skilled Team With Ductwork Design, Fitting, Electrical Work (All Wiring Will Be In The Concealed Conduit), Required Civil Repairs, Commissioning & Tetsing Of The Same. (Vendor May Visit The Site). The Whole Work Will Be Done Scientifically Keep In View All And Future Requirements Of Both The Systems. Between The Two Systems I.E. Safety Shower And Fume Hood There Will Be Backlit Glass/Acrylic Djb Logo And Lab Certifications. Civil Work:Demolition Of Existing Slab And Back Wall Tiles, Re-Plastering Of Back Wall And Tile Work. 10 X 18 Including Corner Of Another Wall (180 Sq Feet). Platform 10 X 5 Of 2 Height Where Safety Shower And Fume Hood Will Be Installed. Vitrified Tile Of Best Quality On Floor 12 X 6. There Will Be Black Granite On The Platform Front(12X2). The Plumbring Work That Include Installation Of 1000 Ltr Water Tank On The Roof Of The Lab, Connection Of Water Of The Systems, And Drainage From Safety Shower To The Drain As Per Specifications. , Demolition Of Existing Slabs, Tiles, Sink, Floor Tiles, Cupboard, Electrical Fixtures And Plumbing Fixtures , Installation Of Body Shower And Eye Shower With Glass Bath And Ss Frame , Installation Chemical Styorage With Fume Suction System Including Carriage. , Fixing Of Eye Shower With Complete Plumbing Work To Maintain Pressure From Djb Mainline Administration Block With Overhead Tank Including All Necessary Work. , Fixing Of Floor Tiles, Wall Tiles, Complete Electrical Work And Civil Cutting Of Window, Manhole With Cover Frame And All Other Necessary Jobs. , Testing & Commissioning With 365 Days Of On-Site Warranty

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 2

Delhi View Result →

20.

Communications and Information Technology #10457552 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Telangana View Result →

21.

Heavy Industries and Public Enterprises #10390733 AOC

Contract Date: Jul 17, 2025 Contract Value : ₹ 11.48 Crore

Boards / Undertakings / PSU No of Bidders 1

Kerala View Result →

22.

Educational and Research Institute #10372706 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

West Bengal View Result →

23.

Public Administrative Department #10363312 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Rajasthan View Result →

24.

Health and Family Welfare #10363172 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Rajasthan View Result →

25.

Housing Urban and Rular Development #10350254 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Rajasthan View Result →

26.

Public Administrative Department #10350188 Price Bid

Tender For Installation And Maintenance Of Ccms In Municipal Board Mount Abu - 1 Supply installation testing & commissioning of IK10 & IP65 3 phase 440V 50Hz , 7.5kw capacity centralized control and monitoring system panel (CCMS) made of fire retardent SMC steel material having lock system suitable for schedule on/off ofLed & garden lights havingfollowing provision:*Dedicated control & metering unit.* pre programmed on/off schedule& remote on/off operation in case of bad weather/emergency /maintenance.Bypass faciltiy per phase.*Data capture of Energy consumption & other electrical data in real time & at pre deterimned interval.*RTC controller should be type tested in NABL approved lab & should be compitable with communication module 2G/4G which transmit data wirelessley and recorded to dedicated server or on cloud based architecture and aslo give command for schedule on/off of cluster of lights. Latiching relay/Bi-stable switch/isolation device should conferming to IEC-61-36/61037 & contactor also conferming to relevant IEC/IS standard13779.MCB conferming to IEC-62053/62054.With included pipe earthing as per IS:3043-1987*Controller also have functional specification is for A) Lux sensor & Astronomical Clock mode :- 1)For switching ON---- < 60 lux for >30 sec or Twilight Duskwhichever is later 2)For switching OFF--->10 lux for >30 sec OR twilight Dawn whichever is earlier and B) for time schedule mode --- For switching ON/OFF---Time selected by user*Controller should connected to separate lithium battery to provide back up of minimum 8 hours in case of power outage.* unit should be supported by web/app based software package with detail information dashboard. * pole mounting/surface mounting stand.*inclusive of 2 year server & website hosting charges.Comprehensive on-site warranty of above Central Control & Monitoring System (CCMS)- Street Light Controller including SIM card or any other maintenance charges for material of 2 years. 2 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure A attached with this BSR 25.0 Sq. mm 3.5 core 3 Plate Earthing as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in-charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 4 Providing & Fixing of ISO certified company made TP&N 415 V AC-23A front handle operated switch disconnector fuse unit, cubical type, with metallic enclosure, as per PWD specification for electrical Works conforming to IS/lEC 60947-3 : 1999 with HBC fuses including making connections with lugs, testing etc as required. Appropriate type test certificate / OEM test report shall be submitted . All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 63 A rating

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 1

Rajasthan View Result →

27.

Public Administrative Department #10350148 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Rajasthan View Result →

28.

Health and Family Welfare #10349479 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Rajasthan View Result →

29.

Health and Family Welfare #10349476 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Rajasthan View Result →

30.

Rural Development #10313932 AOC

Contract Date: Apr 20, 2026 Contract Value : ₹ 57.86 Lakh

Boards / Undertakings / PSU No of Bidders 2

Jharkhand View Result →

31.

Civil Aviation #10288885 AOC

Tender For Misc. Electrical Work Sh Sitc Of Lps At Crsd, Old Area, Safdarjung Airport, New Delhi.; 1 SITC of Parallel Connectors for (700mm air terminal) connecting two conductors in parallelmanner. Material- SS, with clamping range- Rd / Rd 7-10 mm & Complied as per Standard EN 62561-1. 2 SITC of Air-termination rod having length- 2500 mm, of Material- AlMgSi, of Diameter Ø 16 / 10 mm(rod lower dia 16mm/rod upper dia 10mm), chamfered on both ends, & Complied as per Standard EN 62561-2. 3 SITC of Side Wall Clamp for air terminal, Material - SS-304 Clamping range suitable for clamping of 10-16mm dia rod 4 SITC of FS clamp for air-termination rods of 16 mm dia, clamps for connecting air-termination rods to conductors with truss head screw, plate, nut and double clamp ,Material of clamp: Al, should have Clamping forair-termination rod: 16 mm dia & Clamping range of Round conductor: 2x 8-10 mm. 5 SITC of Universal connector of Material- SS, with clamping range- 8-10mm dia, with truss head screw M10x35 mm & Complied as per Standard EN 62561-1., 6 SITC of Roof Conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi & Complied as per Standard EN 62561-2. 7 SITC of Conductor holder for Parapet wall/Side wall of Material- SS,suitable for holding of round conductor of 8-10 mm dia,Fl 20 mm, Height- 20 mm ,along With accessories Screw and Gitty, Material SS (M5 x 50mm) & Complied as per Standard EN 62561-4 8 SITC of Roof conductor holder for installing rigid conductor running on the corrugated sheet roof having profile height range from 5 mm and 8 mm, Material of conductor holder: SS,the clamp shall support Round counder of 8-10 mm dia. 9 SITC of Conductor holder for downpipes for installing down conductorswith fixed conductor routing Type PV, adjustable, with M8 clamping screw, suitable to be clampled on pipe: 50-120 mm dia , clamp shall hold round Conductor of 6-8 mm dia Material of conductor holder: SS 10 SITC of Lightning strike counterhaving 3 Digit LCD Impulse real Date time Counter for recording discharge currents,lightning and impulse Max. countable impulse current (10/350 µs) (Iimp )100 kA Min. countable impulse current (10/350 µs) (Iimp )1 kA currents in down conductors (including HVI Conductors), earthing and equipotential bonding systems Lightning strike counter as per GB/T 33588.6 and IEC 62561-6: Type 1 + type 2 CE, GB, UKCA 11 SITC of Copper insulated Conductor (CUI), 3500 mm long CUI Conductor for avoiding touch voltages on down conductors. Material of conductor: Cu, Material of insulation: XLPE, overall Diameter of conductor: 20 mm , cross-section of core: 50 mm2,Colour of conductor: light grey Standard: EN 62561-2. 12 SITC of Conductor holder for the CUI Conductor for mounting the CUI conductor , for wall mounting ,Material of conductor holder: SS, Suitable to hold the Conductor of 20-21 mm, Fixing : 6.5 x 16 mm, Screw: M6 x 14 Standard: EN 62561-4 13 SITC of Isolating spark gap for equipotential bonding according to IEC 62305-3,particularly for use in potentially explosive atmospheres. Power frequency sparkover voltage (50Hz): <= 0.5 kV Rated power frequency withstand voltage (50 Hz): <= 250 V Rated discharge current (50 Hz): 500 A / 0.2 sec. (Tu <= 45°C) Degree of protection: IP67 Enclosure: M10 x 25 screw and spring washer on both ends Approvals CE UL TÜV 17.0698 X 14 SITC of 3 Phase / Type1+2Lightning current & Surge Protection Device at mains LT panel (3 phase, 415 V variation of 10%) for (L-N) Single-pole combined digital with 3 Digit LCD Impulse real Date time Counter , lightning current and surge arrester, Type 1 SPD -the device shall be non-exhausting metal encapsulated, spark gap based technology and tested as per latest and valid IEC 61643-11:2011 or EN 61643-11:2012 standards. It shall be capable to discharge Lightning current (10/350µs) of 25kA (L-N) and 100kA(N-E) and voltage protection level of device shall be ≤ 1.5 KV. The device shall have inbuilt fuse for L-N. Follow current extinguishing capability [L-N]/[N-PE] : 100kArms / 100Arms. The short circuit with stand capability of the device shall be 100 KArms for L-N SPD. The device shall have mechanical indication for both the states (green for ‘healthy’ and red for failure) on L-N and N-PE. The device shall be certified by KEMA /VDE or NABL lab as per IEC 61643-11:2011 or or EN 61643-11:2012 for testing of all parameter at 10/350 µs and 8/20 µs .The complete system shall be in transparent enclosure IP65. 15 SITC of UNI Disconnecting Clamps with intermediate plate for round and flat conductor, of Material- SS, Material thickness- 2.5 mm, with clamping range for round conductor of 8-10 mm dia& for flat30 mm width, & Complied as per Standard EN 62561-1., 16 SITC of GI flat (25x6mm) Strip. Having width- 25mm, Thickness- 6mm, Material- Hot dipped Galvanized Iron, Cross Section- 150mm2, & Complied as per IEC 62561-2., 17 SITC of GI strip holder of material- Dow moulded compound, having height- 19mm, Slot Size- 25x6 mm. 18 SITC of Copper bonded rod with Low carbon steel, high tensile strength copper bonded rod with min 250 microns of copper plating, UL listed with company name marked on rod. Diameter of rod- 17.2 mm, Length- 3 meters, Material- Copper Bonded, Coating thickness- 250 microns, min, Approvals- Tested acc. IEC / EN 62561-2, UL 467., 20 kg backfilled compound, Material- Carbon based backfill/earthing compound, Fulgurite formation test at direct lightning (10/350 μs), lightning long duration test at 100 degree Celcius- No fulgurites test Pass, Environmentally Friendly ROHS certified, Resistivity< 0.12 ΩM, Complying Standard- IEC 62561-7 , Testing Approvals Certified from- NABL accredited Laboratories, SS-316 grade clamp to terminate the load on earth electrode, Poly plastic pit cover of material- Polymer Body & Cover. 19 SITC of Anti-corrosion tape( Length of roll-10 Mtr) (width: 50 mm) Anti-corrosion tape For wrapping underground and above ground connections for use in the soil , UV-stabilised Material: petrolatum . 20 SITC ofadvanced Earthing Monitoring System with Local HMI, IoT Cloud, and Mobile App support. It is DIN rail mountable (35mm, EN60715) and supports Wi-Fi, RS-485, and Ethernet connectivity. Measures Earthing Resistance (0.31–30 Ω) using the Fall of Potential (3-pole) method, Earth Leakage (0.010–30A), and N-E Voltage (0.5–15V) across up to 3 channels. Provides fault indication via LED, display, web interface, and 2 potential-free contacts for alarms. Operates on 110–415V AC, 45–55Hz.

Contract Date: Nov 18, 2025 Contract Value : ₹ 51.46 Lakh

Boards / Undertakings / PSU No of Bidders 2

Delhi View Result →

32.

Housing Urban and Rular Development #10282555 Price Bid

Operational And Maintenance Of The Swimming Pool And Other Miscellaneous Works At Ludlow Castle Wrestling Venue, Training Centre, Delhi-54- 1 Initial Filling of water in the Swimming pool of approximate 5,00,000 litre capacity after cleaning the pool by help of various acids through back-washing method including servicing of pumps, starter and other equipment’s etc. filling of pool with water, initial dosing of chemical and submission of 1st water test report approved from NABL to the Engineer-in-charge etc. complete as reqd. 2 Cleaning ,Running, Operation of Sand filter including check & refilled Sand for required mark and change the faulty ball valves or top mount plate etc complete as reqd. 3 Repair & Replacement of all types ofMS / GI / PVC/ CPVC / UPVC Pipes & Ball Valve / Gate Valve / NRV / Butterfly valve etc. with their accessories of Swimming pool Campus etc. complete as and when reqd. 4 Running, operation and upkeeping of swimming pool and plant including cleaning of deck area, bath room, drain channel and operation of suction sweeper to clean sedimentation settled at the bottom of the pool to keep the pool clean including replacement of nylone rope, nylone brushes etc. as and when required i/c maintenance and operation of 2 Nos. 10 HP filter pump and 2 Nos. 5 HP submersible pump for makeup of water complete etc as reqd as and when required, attending day to day complaints of electrical installations and compound lights including repairing the wiring and light fixtures complete with carrying out the daily drill comprising of cleaning of the electrical installation, lodging of electrical complaint in the complaint register, testing the insulation resistance, earth resistance etc. on account of failure of above services for their proper functioning alongwith repair works, as and when required and recording reading in log book, keeping the entire installation on functional mode on all days of the month i/c Sunday and holidays by deploying following staff, maintaining the record i.e attendance Register, complaint register duly signed by the client and site Engineer as per direction of engineer-in-charge and as per terms and conditions attached.a) Operator- 3 Nosb) Khallasi - 2 Nos. c) Electrician - 1 No 5 Supplying and dosing of day to day chemicals for swimming pool consisting to maintain the water quality as per with the standards of swimming pool, including daily water testing by testing kits including keeping records (duly signed by the clinet and site Engineer) of PH Value and Chlorine Level of Pool-water as required at site with the following chemicals for the swimming pool. (For approximate 12 Lacs litres water capacity swimming pool) 6 HCL 7 Alum 8 Soda ash 9 CuS04 10 TCCA90 11 Monthly basis testing of swimming pool water from the reputed and Govt. recognized test laboratory i/c collection of water sample from pool, sending the sample to the lab and collection of report and submitting the test report to the site Engineer etc. complete as reqd. 12 Comprehensive Annual Maintenance contract and service charges for 55kw heat pump which includes supply and replacement of components found defective, servicing, repairing, rectification of condenser coil, cooling coil, thermostat relay, PCB, fan motor, electrical wiring, gas charging if found necessary including replacement / repairing of sealed compressors etc. complete as required. 13 Comprehensive Annual Maintenance contract and service charges for 1.5/2.0/4.0 TR Split type AC (invertor/non-invertor) units which includes supply and replacement of components found defective, servicing, repairing, rectification of condenser coil, cooling coil, thermostat relay, PCB, fan motor, electrical wiring, gas charging if found necessary including replacement / repairing of sealed compressors etc. complete as required. 14 Supply of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with remote for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req. a) 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 15 Supplying, Installation, Testing and Commissioning of 450 mm Sweep 900 RPM Heavy Duty ISI Marked Exhaust fan with louvers & shutters in the existing opening, including making good the same, connection, testing, commissioning etc. as reqd. 16 Supplying, installation, Testing & Commissioning of SWIMMING LED light (Round / Polycarbonate body / SS304) Operating temp range -15 deg to +40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating . complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required , . Shape size and CCT shall be as approved by Engineer in charge. System lumen efficacy ≥105 and <120 lm/Watt output All as per pre approved by Engineer-in-charge. a) 54 watt 17 Supplying, installation, Testing & Commissioning of LED Recessed /surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.).Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 18 12 -15 watt 19 Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends,CCT 3000°K / 4000°K / 5700°K /6000°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm) 20 18- 22 watt 21 Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg- 120deg as per the application and the project requirement deg, suitable tilt able fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 22 150 watt 23 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V C curve DP MCB complete with connections, testing and commissioning etc. as required. 24 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 25 mm 26 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as re uired. 27 3 x 1.5 sq.mm 28 3 x 4 sq.mm 29 3 x 6 sq.mm 30 Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 31 100 Amp , 16 KA, TPMCCB 32 125 Amp , 16 KA, TPMCCB 33 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 34 Single Pole 35 Double Pole 36 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 37 3 Module 38 6 Module 39 8 Module 40 12 Module 41 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 42 5/6 A switch 43 15/16 A switch 44 3 pin 5/6 amp socket outlet 45 6 pin 15/16 A socket outlet 46 Supplying and laying of following size XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 1.1 KV grade conforming to IS 7098 (Part I) ISI on wall surface as required. (Clamped with 1 mm thick saddle/25x 3 mm MS flat clamp) 47 3 x 10 Sqmm 48 Lowering and Lifting of 5 to 10 HP three phase submersible -open well mono block pump set in existing under ground water tank with the help of chain pulley block and tripod stand along with GI pipe complete as reqd. 49 Rewinding, repair and servicing of following monoblock/ mono submersible pump set/ submersible pump set suitable for run 3 phase, 440volt, 50 Hz AC supply i/c dismental from existing locationand carriage (to and fro) to the workshop and testing, commissioning with credit of scrap copper wire and other parts etc.as required. 50 5 to 10 HP 51 S.I.T.C of 440 volt 50Hz, 3 Phase, semi autimatic star-delta stater panel suitable for 5/7.5/10 HP Open-well / borewell motor pump set having Ammeter, Voltmeter, Selector Switch, Single phase priventer etc as reqd.with credit of old dismentled material as reqd. 52 Supplying, Installation, testing of commissioning of 7.5 HP 440 Volt, 2900 RPM 8 stage Borewell submersible pump set capable of delivery of390 LPM at the head of 22meter directly coupled with submersible electric motor size 50 mm dia i/c GI pipe nipple, 50 mm flange, cable G.I pipe loweringmaking connection as reqd.i/c removing old pumpset trsting complete in all respect as reqd. 53 Supply, installation, testing and commissioning of Reverse Osmosis System with capacity of 250 LPH designed for Treatment of saline water in the TDS range of 500-2000ppm which are Completely assembled /Pre-piped/Pre-wired with Microprocessor-based control Pannel for ease of operation and inbuilt process Logic having provision for Auto start/stop based on Water level in the Tank with MCB for Plant operation and Raw water pump integrated with Plant. Integrated pretreatment Module for removal of suspended solids along with pressure gauges, Robust high Pressure Pump in SS 304 Construction, Inbuilt Protection to high Pressure Pump by Way of Low Pressure Switch/high Pressure switch and Glycerine filled SS Pressure gauges for durability, On line Rota meter for measuring permeate flow and Powder coated MS skid with plated hardware. RO plant have Pressure Sand Filter of 1000 LPH, Activated carbon Filter of 1000 LPH, Antiscalant Dosing System with tank capacity of 50 Litre, Micron cartridge filter of 5 micron, 10 long, High pressure pump of 1000 LPH , 1.2 KW, RO membrane of 4*40 - 1 Nos. of GE/Equivalent having backwash facility along with 1 Year Maintenance wrt Replacement of Micron Cartridge Filter and Antiscalant Chemical. The Company is having their NABL Accredited Lab Testing facilities in Delhi. Our Product Is ISO 9001 , Indian Medical Association Certified GC (Green Company) Mark BIS certificate,ISO 14001, ISO17025, ISO9001i/c credit for existing RO plant etc. as required. 54 Supplying, Installation, Testing & Commissioning of self contained storage type water cooler suitable for operation on 230 V single phase A.C. supply having following capacity per hour cooling capacity & storage capacity with SS304 stainless steel body, air circulation R-32/R-410 /R-407/ R134a Green Refrigerant with Scroll / rotary compressor with min 5 year OEM warranty of compressor, water over flow 1/2 BSP (connections) i/c MS Angle Iron Stand of suitable size, complete and other accessories i/c connection testing etc as reqd. 55 storage 150 ltr, cooling capacity 150 ltr per hr 56 Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminum Body including trim 57 12 -15 watt

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Delhi View Result →

33.

Health and Family Welfare #10276803 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Rajasthan View Result →

34.

Educational and Research Institute #10265178 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 9

Tamil Nadu View Result →

35.

Housing Urban and Rular Development #10193833 Price Bid

Tender For Electrical Installation Works Of Five ( 5 ) Newly Procured Fume Exhaust System At West Bengal Public Health Laboratory- 1 Supplying And Drawing 1.1 Kv Single Core Stranded Fr Pvc Insulated & Unsheathed Single Core Stranded Copper Wire ( Brand Approved By Eic ) Of The Following Sizes In The Prelaid Polythene Pipe And By The Prelaid Gi Fish Wire And Making Necy. Connection As Required [ Ref : E-9 / 1 ] 2 A ) 4X80 / 0.4 ( 10 Sqmm ) + 2X84 / 0.3 ( 6 Sqmm ) As Ecc. 3 B ) 4X84 / 0.3 ( 6 Sqmm ) + 2X56 / 0.3 ( 4 Sqmm ) As Ecc. 4 Supplying And Fixing Pvc Rigid Conduit Fr [ Precision Make ] On Wall, Ceiling With Saddles And Other Accessories As Required And Mending Good Damages To Building Works. [ Ref : E-16 / 7 ] 5 A ) 25Mm Size. 6 Distribution Wiring In 1.1 Kv Single Core Stranded Fr Pvc Insulated & Unsheathed Copper Wire ( Brand Approved By Eic ) In 20Mm Size Pvc Rigid Conduit Fr ( Precision Make ) Incl. Necy. Fittings As Required [ Ref : E-14 ] 7 A ) 2 X 84 / 0.3 ( 6 Sqmm ) + 1 X 56 / 0.3 ( 4 Sqmm ) Ecc 8 B ) 2 X 56 / 0.3 ( 4 Sqmm ) + 1 X 36 / 0.3 ( 2.5 Sqmm ) Ecc 9 Finishing Of The Pvc Insulated Wire Ends By Socketting With Pin / Ring Type Copper Sockets And Insulated Tapes Etc., Including Supplying Sockets, Tapes. [ F-5, 9 ] 10 A ) 10Sqmm. 11 B ) 6 Sqmm 12 C ) 4 Sqmm 13 D ) 2.5Sqmm 14 Supplying And Fixing Mcb Ss Enclosure With Ip-20 / 30 Protection, Powder Coated Provision For Two / Four Pole Mcb, ( Make : Legrand / L & T ) Concealed In Wall After Cutting The Wall & Mending Good The Damages To Original Finish Incl. Painting, Connection & Provision For Earthing Attachment [ D-9 / 11 ] 15 A ) 4 Way. 16 B ) 2 Way. 17 Supplying And Fixing 240 / 415 V Mcb Isolator On Din Rail Of Existing Dbs And Necessary Connection. ( Make: Legrand / Schneider / L&T ) [ Ref : D-5 / 6 ] 18 A ) Fp, 63 A. 19 B ) Dp, 40 A. 20 Supplying And Fixing 240 / 415 V Mcb Of Breaking Capacity 10Ka & C Characteristics On Din Rail Of Existing Dbs And Necessary Connection ( Make: Legrand / Schneider / L&T ) ( D-6, 7 ) 21 A ) Sp 6-32A 22 Supplying And Fixing Double-Door Spn Mcb Distribution Board With Ip-42 / 43 Protection, Concealed In Wall After Cutting The Wall & Mending Good The Damages To Original Finish Incl. Inter Connection With Suitable Size Of Copper Wire And Neutral Link & Provision For Earthing Attachment. ( Make: Legrand / Schneider / L&T ) [ Ref : D-9, 13 ] 23 A ) 2+4 Way 24 Supply & Fixing 240 V, 3 Nos. 6 A, 1 No 16A, 3 Pin Modular Type Plug Socket With 3 Nos. 6A & 1No 16A, Modular Type Switch ( Brand Approved By Eic ) , Without Plug Top On 2 Row 12 Module Gi Modular Type Switch Board With 2 Row 12 Module Top Cover Plate Flushed In Wall Incl. S&F Switch Board And Cover Plate And Making Necy. Connections With Pvc Cu Wire And Earth Continuity Wire Etc [ Ref:E-17 ] ( Computer Board ) 25 Supply & Fixing 240 V, 3 Nos. 16 A, 5 Pin Modular Type Plug Socket With 3 Nos. 16A Modular Type Switch ( Brand Approved By Eic ) , 20A Modular Switch Type Sp Mcb ( C-Curve ) And Indicator Without Plug Top On 2 Row 12 Module Gi Modular Type Switch Board With 2 Row 12 Module Top Cover Plate Flushed In Wall Incl. S&F Switch Board And Cover Plate And Making Necy. Connections With Pvc Cu Wire And Earth Continuity Wire Etc. [ Ref : E-18 / 13 ] 26 S & F 20 / 25A Plug Top ( Brand Approved By Eic ) [ Ref : K-3 / 113 ] 27 S & F Of48 Sweep, 230V, 1-Phaseac Ceiling Fans Incl. All Accss., The Capacitor Of Fan Must Be P-2 Type Brust Proof & Must Have Safety Wire Directly Linked From Fan Hook To Stator Of Fan, Complete With Blades, Canopy, Fork, Rubber Bush Etc. Incl. S&F Connecting Wire For Down Rod Upto 30 Cm Incl. Painting The Rod With Approved Paint And Making Necessary Connection As Required By 2X1.5 Sqmm Flexible Copper Wire.. [ Make:Crompton-Hs / Riviera High Speed / Equivalent Model Of Orient ) --- Color-Brown ] [ Ref.: Non Schedule & Page No.-C-3, Sl. No.-21 ( A ) ] 28 Engraving The Deptt. Number With 10 Mm Lettering On The Body Of Fan Upto 10 Letters Incl. Hifen, Stroke Or Stop [ Ref: Schedule- C-3, 24 ] 29 Supplying & Fixing Ms Fan Clam Of Two Piece Type For Rc Ceiling As Per Approved Specification, Fabricated From 40 Mm X 9 Mm Ms Flat Including Making Good Damages To Building Roof With Satisfactory Finishing And Painting – ( As Per Drawing No. 475 Of Pwd Specification Book – May 1991 ) [ D14 / 29 ] 30 S&F Of 230V Grade 400 Mmsweep ( 18 ) Wall Mounting Bracket Fan ( Metal Body & Metal Blade ) On Wall Incl. S & F Of Ms Fastners And Nut & Bolts Etc. As Reqd. ( Make-- Epc ) [ Ref : N.S ] 31 3 Core 2.5 Sq.Mm Communication Cable [ Ref:N.S ] 32 Supply & Fixing 25 Mm Dia Pvc Flexible Conduit. [ Ref:N.S ] 33 S & F Of 120 / 240V Electronic Fan Regulator - Step Type Socket Size As Per Direction Of The E.I.C. Incl. Making Necy Conncetion. ( Make- Anchor ) . [ Ref:N.S ] 34 Add Works Contract Charge In Respect Of Gst @18% 35 Add Lwc @1% 36 Defect Liability Period : 1 Year

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 7

West Bengal View Result →

36.

Housing Urban and Rular Development #10191469 AOC

Contract Date: Jun 17, 2026 Contract Value : ₹ 78.07 Crore

Government Departments No of Bidders 9

Jharkhand View Result →

37.

Health and Family Welfare #10187107 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Rajasthan View Result →

38.

Health and Family Welfare #10187103 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Rajasthan View Result →

39.

Drinking Water Supply and Sanitation #10186868 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Rajasthan View Result →

40.

Power #10172978 AOC

Contract Date: Apr 23, 2026 Contract Value : ₹ 21.94 Lakh

Government Departments No of Bidders 3

Uttar Pradesh View Result →

41.

Public Administrative Department #10170577 Price Bid

Supply, Installation, Testing, Commissioning Of 125 Kv Silent Dg Set At Municipal Council Baran. , Supply, Installation, Testing, Commissioning Of Radiator Cooled And Turbo Charged Silent Dg Set ( As Per Latest Cpcb Emissionnorms ) Havingspecifications As Per A, B, C, D, E, F, G, H & I A ) 1500 Rpm Diesel Engine Conforming To Bs:649 / 5514 Of Suitable Bhp ( Up To 82.5 Kva 6 Cylinder Or Below Required, 125 Kva & Above Ratings 6 Cylinder Or Aboverequired ) Capable Of Taking 10% Over Loading For One Hour After 12 Hours Of Continuous Operation., Dry Exhaust Mainfold With Hospital Grade Silencer And Catalytic Convertor ( Isolated From Main Dg Chamber ) , Up To 3 M Exhaust Piping ( With Lrb Insulation & Alum. Cladding ) As Required . B ) Ac Brush Less Spdp Alternator Conform To Bs 5000 ( Part 99 ) Or Is / Iec 60034-1. . Alternator Shall Be Self Regulated With Standard Alternator Protection ( Over Voltage , Over Speed & Under Voltage, Under Speed Warning & Shutdown ) .Engine & Alternator Mounted On A Common Base Frame & Coupled Through A Flexible Coupling Or Close Coupled C ) Cpcb / Arai Approved Standard Canopy With Weatherproof, Powdercoated Accoustic Enclosure For Dg Set For Sound Attenuation Fabricated From 1.6 Mm Crca Sheet Steel ( Structure ) With Sidewall Fabricated From 1.6 Mm Crca Sheet & Filled With Glasswool ( 96Kg / M3 ) / Foam. As Per Is8183 The Doors Of 28 / 40 / 50 / 85Mm Thick As Perrating And Fabricated From 1.6Mm Crca Sheet Packed With Accoustic Material, All Doors / Opening Are Sealed With Neoprene / Epdngaskets. The Dg Set Has Inbuilt / External In Fuel Tank To Run 6 To 8 Hrs As Per Oem Standard, With Protection And Tripping Of Dg Set Against Temperature Of More Than 50 Degree Centigrade. , D ) Electronic / Mechanical Governor, Manual & Electric Start , Batteries With Battry Charger, Engine Instruments Panel, Avm Pads All Controls For Operation Of Dg Set Are From Outside The Enclosure With Dg Control Panel Having Microprocessor Based Genset Monitoring Like Running Hour, Rpm, Low Lube Oil Tripping & Control System, Panel Mounted Mccb / Acb Of Suitable Rating, Ammeter, Voltmeter, Pf Meter, Frequency Meter, Kwh Meter, Digital Fuel Display Meter, Ind.Lamps Etc. Mounted Inside Enclosure , Visible And Accessible From Outside. The Enclosure Should Be Suitable For Following Capacity Dg Sets And Alternator. Noise Level Shall Be Less Than 75 Db At A Distance Of 1 Mtrs. Duly Certified By Authorised Agency Etc. Complete In All Respect Of Following Capacity : E ) ( I ) Accoustic Glass Wool Wall Thickness Should Not Be Less Then 40Mm And Not Less Then 20Mm Pu Foam Upto Rating 100 Kva. ( Ii ) .Accoustic Glass Wool Wall Thickness Should Not Be Less Then 65Mm And Not Less Then 50Mm Pu Foam Upto Rating 250 Kva. ( Iii ) Accoustic Glass Wool Wall Thickness Should Not Be Less Then 100Mm Forrating Above 250 Kva. , F ) First Filling Of The Fuel Tank Shall Be Done By Contractor And The Prevailing Fuel Cost At That Time Shall Be Reimbursed To The Contactor By Department. G ) Servicing Contract Of Dg Set From Oems Authorised Service Dealer As Per Oem Guidelines During The Dlp Period Shall Be Done By Contractor Including All Consumables, Actual Charges Shall Be Reimbursed To The Contractor By End User Department. H ) Manufacturer / Oem Must Have Its Authorized Service Dealer In Rajasthan. Which Can Provide Service Within 6 Hours Of Compalint Registration. I ) Dg Set Will Be Offered For Inspection And Testing At Manufacturers Works In Presence Of Departmental Engineers. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . , 125 Kva At 0.8 Pf 415V 50Hz 3-? , Sitc Of Plc Based Auto Main Failure ( Amf ) Panel Fabricated From Crca Sheet Steel 2 Mmthick , Powder Coated Finish , Engine Start & Stopcommands, Control Relays , Ammeter & Voltmeterwith Selector Switches, Control & 2 Nos 4 Pole Power Contactors With 2 No. Of Required Size 4 Pole Mccb, Timers, Electronic Hooter , Visual & Alarm Indication For Faults, Ups, Operator Interface Panel Complete In All Respect Suitable For Following Capacity Dg Sets: Appropriate Test Certificate / Report Of Product / Accessories From Oem / Panel Manufecturer Shall Be Submitted. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr .100 To 140 Kva , Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Arrmouredaluminiumcable Confirming To Is:1554 P-I / Is :7098 P - I Of 1.1 Kv Withh4- Grade Electrolyticaluminium Conductor Confirming To Is 8130 Of Purity >99.6 %, Round / Flat Strip Armouring Of Cables, Inner / Outer Sheath Confirming To Is:5831In Existing Rcc / Hume / Stoneware / Pvc Pipe / Open Duct / Cable Trench / Cable Tray ( With Cable Tie ) Includingtesting Etc. As Required Of Following Size. Oem Must Have Its Own In House Nabl Accrediated Laboratory For Testing Procedure As Per Is:10810.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 25.0 Sq. Mm 3.5 Core , Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 ( 1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size ) Upto Plinth Level With Cement Mortar 1:6 ( 1-Cement : 6-Sand ) . , 1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) , 1:3:6 ( 1 Cement : 3 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) , Plaster On New Surface On Wall In Cement Sand Mortar 1:4 Including Racking Of Joints Etc. Complete Fine Finish : 20Mm Thick , Finishing Wall With Water Proofing Cement Paint Of Approved Brand And Manufacture And Or Required Shadetogive An Even Shade Including All Scaffolding: New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) . , Plate Earthingas Per Is:3043 With Hot Dipped G.I. Earth Plate Of Size 600Mm X 600Mm X 6.0Mm By Embodying3 To 4 Mtr. Below The Ground Level With 20Mm Dia. G.I. B Class Watering Pipe , Including All Accessories Like Nut, Bolts, Reducer, Nipple, Wire Meshed Funnel, And Heavy Duty Weather Proof Poly-Propylene Earth Pit Chamber With Lockable Jam Free Lid Suitable For Safe Working Load 5000 Kg Or More Of Size Top Dia. 225 To 260 Mm, Bottom Dia 300 To 350 Mm. And Height250 To 300 Mm. And Embodying The Pipecomplete With Alternate Layers Salt And Coke / Charcoal, Testing Of Earth Resistance For Value Of 5 Ohms Or Lessas Required & Must Record By Engineer In Charge During Site Visit And Ensure To Enter In Measurment Book.All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . , Plate Earthing As Per Is:3043 Withcopper Earth Plate Of Purity >95% Of Size 600Mm X 600Mm X 3.0Mm By Embodying3 Mtr. Below The Ground Level With 20Mm Dia. G.I. B Class Watering Pipe , Including All Accessories Like Nut, Bolts, Reducer, Nipple, Wire Meshed Funnel, And Heavy Duty Weather Proof Poly-Propylene Earth Pit Chamber With Lockable Jam Free Lid Suitable For Safe Working Load 5000 Kg Or More Of Size Top Dia. 225 To 260 Mm, Bottom Dia 300 To 350 Mm. And Height250 To 300 Mm. And Embodying The Pipecomplete With Alternate Layers Salt And Coke / Charcoal, Testing Of Earth Resistance For Value Of 5 Ohms Or Lessas Required & Must Record By Engineer In Charge During Site Visit And Ensure To Enter In Measurment Book. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr .

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Rajasthan View Result →

42.

Power #10168894 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Rajasthan View Result →

43.

Health and Family Welfare #10164269 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Rajasthan View Result →

44.

Health and Family Welfare #10164225 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Rajasthan View Result →

45.

Health and Family Welfare #10164222 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Rajasthan View Result →

46.

Health and Family Welfare #10164219 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Rajasthan View Result →

47.

Health and Family Welfare #10164215 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Rajasthan View Result →

48.

Health and Family Welfare #10164212 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Rajasthan View Result →

49.

Agriculture #10079043 Price Bid

Tender For Supply Of Veterinary Instrument / Equipment / Chemicals / Re Agent / Media Supply Of Veterinary Instruments / Equipments / Chemicals / Reagents / Media , Hematology Auto-Analyzer , 5 Part Veterinary Hematology Analyzer For Veterinary Use Only And Not For Human, With Feature Of Direct Mode To Select The Canine, Feline, Equine, Bovine, Ferret, Gerbil, Rabbit, Pig, Mini Pig And Guinea Pig, Goat, Sheep, Llama, Alpaca, Camel, Dolphin, Based On Laser Flow Cytometry, Optical Fluorescence And Laminar Flow Impedance Technology To Measure All 26 Parameters: Red Blood Cell – Rbc, Hematocrit - Hct%, Hemoglobin - Hgb, Mean Corpuscular Hemoglobin Concentration - Mchc, Mean Corpuscular Volume – Mcv, Mean Corpuscular Hemoglobin – Mch, Red Cell Distribution Width – Rdw, Reticulocyte Count % , White Blood Cell – Wbc, Neutrophils - % And Neutrophils Absolute Numbers, Lymphocytes - % And Lymphocytes Absolute Numbers, Monocytes - % And Monocytes Absolute Numbers, Eosinophils - % And Eosinophils Absolute Numbers, Basophils - % And Basophils Absolute Numbers, Platelets – Plt, Mean Platelet Volume – Mpv, Platelet Distribution Width – Pdw, Plateletcrit Value – Pct, Requiring Less Than 30 ?L Of Anticoaguled Whole Blood, With Other Important Parameters Reticulocyte Hemoglobin, Band Neutrophil And Reticulocyte Count Also, Also To Report For Other Parameters Like Nucleated Rbc, Band Neutrophil Etc If Presence Suspected In Sample, Requiring Two Reagent Kits One External And One On Board, With Results In Two Minutes, Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Standby Mode, External Printer Interface Facility To Get The Printouts With All Parameters Including Dot Plot, Integrate With The Laboratory Information Management System For Analyzer Operation As Well As Patient Information With Patient Records, Us Fda / Ce / Iso Approved , Trinocular Microscope , Trinocular Microscope: Head: Trinocular 30 Degree Inclined W / Photo Tube & C-Mount Eyepieces: Cfi E 10X ( 20Mm ) Objectives: Cfi E Plan Achromat 4X, 10X, 40X, 100X Oil Stage: Mechanical Stage With Slide Holder Condenser: E2 Abbe Condenser N.A. 1.25, Aperture Diaphragm With Position Guide Markings For Respective Cfi E Plan Objectives Focus: Coaxial Coarse / Fine Focus Controls Illumination: Led Illumination Misc: Dust Cover, Power Cord, Manual Warranty: 5 Year Mechanical And Electrical Camera Specifications: Screen ( Optional ) Mountable 11.6 Retina Display Screen ( Hardware Included ) Resolution ( Live ) : 1920X1080 - Captured 5 M.P. Sensor: 1 / 2.5 ( 0.5X C-Mount Recommended ) ; Aptina Mt9p031 Frame Rate: Hdmi ( 30Fps ) ; Usb 2.0 ( 15Fps ) Image Capture: High Speed Sd Card ( 4Gb ) Video Capture: Hdmi: 1080P, 30Fps To Sd Card Usb 2.0: 1080P, 15Fps To Pc Or Mac Exposure Time: 0.001 Sec - 10.0 Sec White Balance: Auto Settings: Gain, Gamma, Saturation, Contraction Built-In Software: Cloud 1.0 Pc Imaging Software: Captavision Imaging Software ( For Pc Only; Mac Os Not Supported ) Advanced Camera Controls: Live / Still Image Measurement And Annotation, Flat Field Correction; Extended Depth Of Focus ( Focus Stacking ) ; Image Stitching; Hdr ( High Dynamic Range ) Function Image Types: Jpeg, Bmp, Tiff And Raw Output Modes: Mode 1: Usb 2.0 / Mode 2: Hdmi System Compatibility: Windows Xp, Vista 7 And 8, And 10 ( 32 Or 64-Bit ) Mac Os X ( For Image Transfer To Mac Os X Only ) System Requirements: Intel Processor ( Core 2 Duo Or Higher ) ; 2Gb Memory Or More; Usb 2.0 Hi-Speed Port Power Supply: Dc12v / 1A , Reinforce Protection Glass 11. Stainless Steel Darkroom 12. 10 Positions Filter Wheel To Be Supplied With The 590Nm Interferential Filter With The System For Ethidium Bromide Application 13. Auto-Exposure, Auto Focus And Automatic Illumination Control 14. The Field Of View Should Be Approximately 21X26 Cm At The Uv Transilluminator ( Slide-Out, Uv 312Nm Excitable ) Level. The Transilluminator Should Be Slide Outdesign. 15. The Uv Transilluminator Is To Be Stained Free Compatible, As Well As For The Most Common Dna / Rna Dyes 16. The System Should Be Upgradable In Future With Up To 6-8 Excitation Channels In The Uv And Visible Area For A Large Array Of Applications Such As Dna Or Rna Gels, 1D Protein Fluorescent Gels, Stain Free Gels 17. A Complete Library That Contains The Excitation And The Emission Spectra Of The Main Fluorophores Used In Modern Molecular Biology Laboratory Should Be A Built-In Feature Of The Software. It Also Should Suggest The Best Possible System Configuration In Terms Of Light Source Excitation, Emission Filter And Sensitivity Level Of Applications To Ensure Reproducibility And Ease Of Use. 18. White Light Conversion Plate Should Be Supplied 19. Facility Must Be Available To Upgrade With Blue Conversion Screen For The Excitation Of The Syber Green And Of The Sybr Safe 20. Suitable Branded Desktop Computer Must Be Quoted As Optional 21. Service Engineer Should Be Available At Bhubaneswar 22. Warranty- 1 Year , Rnase Jap , Steri Sweep Molecular Grade , Petridsih Disposable, 100Mm , Bq Rapid Test Kit , Goat Pox Virus Antigen Rapid Test Kit , Hs Rapid Test Kit , Ppr Virus Antigen Detection Rapid Test Kit , Rd Virus Antigen Detection Rapid Kit , Rotheras Mixture Lr , Super Script™ Iii Platinum™ One-Step Qrt-Pcr Kit Catalog Number:11732020 Molecular Grade , Cryo-Container 3 Litres , ( Capacity-3 To 4 Lts Of Ln2 With Static Evaporation Loss Rate Of 0.135 Litres Per Day At Stp, 6 Canisters With Od 38 Mm, Height 120Mm. The Level Of Ln2 From Bottom Should Be About 20Cm. The Neck Diameter Should Be 50Mm. The Container Is Meant For Private Ai Practitioners & Should Be Sturdy ) , Cryo-Container 35 Litres , ( High Strength Aluminium Alloy Liquid Nitrogen Container, Neck Diameter About50mm, Loss Mass- 0.29 Litre Per Day, Static Holding Time-123 Days ) , Frozen Semen Straw Lifter-10 , Stainless Steel, L Shaped, Designed To Lift Semen Straws With Vertical Serrationsmade At The Tips ( 10’’ ) , Kit Bag, Nylon Fabricated Materials, Water Proof With Good Quality Chain Having Two Main Inside Partitions & One Outsidebox Pocket, With Hanging Handle & Back Carrying Belt, 12 Height, 21 Length, 7 Width, Able To Carry 10 Kg Weight , Burdizzo Castrator For Bull Calf, Made Up Of Stain Less Steel ( 19 Length ) For Bull Calf. Burdizoo Pattern Castrators For Large Animals Consist Of Two Jaws ( Upper Jaw And Lower Cord Stop Jaw ) With Two Levers Coupled With Nuts. Material Carbon Steel Length ( Total ) 19” Width Of Upper Jaws 75 Mm + / - 2 Mm Lower Jaw ( Cord Stop Jaw ) Cord Stop Of 5-8 Mm Ht. On Both Sides ( The Gap On Either Side Between The Upper Jaw And Lower Jaw ( Having Cord Stop ) Should Range Between 1 To 1.5Mm ) Other Requirements:- 1. Tenderer For Imported Castrators Should Submit Proper Letter Of Authority From Their Principals. 2. The Offered Product Should Be In Indian Market For At Least 2 Years. 3. List Of Actual Users To Whom Same Brand Is Supplied Should Be Submitted With Copy Of Ratecontract / Supply Order Etc. 4. The Castrators Should Be Guaranteed For Satisfactory Performance For A Period Of Minimum One Year From Date Of Supply, During Which The Bidder Shall Be Liable To Be Replaced The Castrators At His / Herown Cost, If Any Complaints Are Received From End User. 5. Castrator Should Not Leave Any Gap Between Upper And Lower Jaw During Castration. 6. The Castrator Should Be Supplied Along With Spanner. With The Help Of Spanner All The Nuts Ofcastrators Shall Be Alternatively Loosened And Tightened Five Times And Neither Nuts Nor Jaws Ofspanner Shall Show Any Sign Of Damage Or De Shape. 7 . Name Of Manufacturing Company Should Be Permanently Embossed / Etched On The Body Of Castrator. , Cryo-Container 50 Litres , ( Liquid Nitrogen Container 50L, Neck Diameter About50mm, External Diameter 500Mm, Height 790Mm, Loss Mass- 0.37 Litre Per Day, Static Holding Time-134 Days ) , Digital / Electronic Semen Thaw Unit 475 Ml Capacity ( For Bovine ) , Made Up Of Stain Less Steel, Thermoflax Model With One Side Handle, With Digital Display Temperature, Having A Plastic Canister Inside To Keep / Lift The Semen Straw, With A Power Cable To Heat, Dimension ( Lxwxh ) ( 4.7 X 4.2X 9.5 ) , Weight ( Empty ) -610G, Power-74W, Rated Frequency- 50Hz, Rated Voltage-220V Ac, Capacity-475 Ml , Frenchmini Empty Straw, Pvc Straw Of Different Colours.Pack Of 2000 Straws ( 0.25Ml ) . Total Length 133Mm + / - 0.25 0.5Mm, External Diameter 1.99Mm , Internal Diameter 1.63Mm, 0.25Ml -Low Absorption Alpha Type With Flouroscent Plug Technology For Precise Filling And Safety , Cryo Gloves , Can Withstand To Retrieve The Frozen Semen Straw From Liquid Nitrogencryo Container , Portable Veterinary Ultrasound Machine , 1. It Should Be Portable Veterinary Touch Screen Color Doppler Ultrasound Unit Having Minimum12” Lcd Led Backlit Screen Size And Should Not Be Weighing More Than 4 Kg Includingbattery. 2. It Should Be Meant Forcanine, Feline, Equine, Bovine, Lama, Pig, Sheep And Others And Should Have True Veterinary Software 3. It Should Have Intuitive Interface, Touch Pad And Touch Key Board 4. It Should Have Touch System To Select Imaging Modes Like: B, B+B, Power B, B+M, M, Cfm Andpw . 5. The Machine Should Offer Dual Cfm- B / Cfm, Adjustable Region Of Interest ( Roi ) , 6. Itshould Offer Image Orientation From Left – Right And Up & Down 7. It Should Have Battery Backup For Minimum 3 Hours And Charging Time Should Not Be More Than 3 Hours 8. It Should Have Minimum 2 Usb Connectors, Wi-Fi Compatibility To Send Images To Ipad And Other Smart Devices , Basic Dicom, Stereo Sound And Bluetooth Compatibility . 9. It Should Have Digital Touch Control For All The Operational Features Like- Adjustment Of Tgc, Gain, Brightness & Contrast, Image Orientation, Focus, Freq, Depth And Dynamic Range. 10. It Should Display Mi & Ti Indexing On The Screen By Default And Should Be In The Permissible Limit As Per Fda And Overall Safe. 11. The Machine Should Be Able To Generate Report Of The Animal Combined With Images To Further Send Through Digitally In Multiple Forms 12. The Ultrasound Machine Should Be Offering Absolutely Very High Image Quality Hence Should Be Using Digital Dual Beam Former And Computing And Should Be Using Minimum 128 Reception Channels And Around 60 Emission Channels Or More. 13. It Should Have 500Gb Hard Disc Capacity 14. The Machine Should Offer Both Portrait And Landscape Imaging View 15. The Machine Should Be Having Hdmi And Wi-Fi Compatibility 16. It Should Have 256 Grey Scale 17. The Machine Must Be Able To Take The Voice Command Of The User To Adjust Depth, Probe Frequency, Focus, Gain And Freeze In B Mode 18. It Should Be Provided With One Micro Convex Probe Having 5-7.5Mhz Frequency Suitable For Small Animal Abdomen 19. It Should Be Offered With Endo Rectal Probe Having Frequency Of 5-10Mhz And 600 Mm Footprint Of The Scanning Face Of The Probe For Large Animal Reproduction And Fetal Sexing On Animal. The Endo Rectal Probe Should Be Atleast 2.5 Meter Long. 20. It Should Have Digitized Tgc Upto 8 Adjustable Zones And Should Be Adjustable With Touch Only 21. The Ultrasound Machine Should Be Fully Compatible For Opu Operation On Animal And Offer Ergonomics Applications To Carry Out Ovum Pickup Successfully With Compatible Devices For Future Procurement. 22. The Machine Should Be Supplied In A Hard Plastic Carry Case Having Proper Housing For Machine And Accessories. 23. The Machine Should Have An Ergo Mount Adaptor For Mounting The Machine On Certain Device / Stand. 24. It Should Have Patient, Hospital And Reporting Format. 25. The Machine Should Be Ce Marked. 26. It Will Be Inevitable On The Part Of The Supplying Company To Arrange And Provide Extensive Clinical Training For Two Days On Animals To Teach About Topographic Anatomy Using Ultrasound And Different Applications Of The Machine For Its Ergonomic Purpose By A Qualified Veterinary Specialist At A Common Venue. 27. The Principal Maufacturing Company Of Offered Product Should Have Their Direct Office And Service Centre In India With Good Strength Of Engineers. 28. The System Offered Should Be Warranted For At Least One Year. , Cryo Can -1.5 Ltr, Capacity 1.5Lit, Material : Aluminium , Static Evaporation Rate : 0.05 Lit / Day To 0.1 Lit / Day , Cryo-Container 55 Litres , Capacity 55Lit, Material : Aluminium , Static Evaporation Rate : 0.43 Lit / Day To 0.45 Lit / Day , Jumbo-12, Capacity 47Lit, Canister : 11, Material : Aluminium , Static Evaporation Rate : 0.35 Lit / Day To 0.4 Lit / Day , Liquid Nitrogen Transfer Hose Pipe ( Non Insulated ) -5 Mt, 1 / 2 Inch Nb 5 Mt Long Flexible Non- Insulated Vacuum Hose Along With Gaskate. , Wide Mouth Container ( Storage Vat Of Frozen Semen Straws ) -390 Liters, •Wide Mouth Container Made Of Non-Magnetic Stainless Steel Of Approximate 390 Ltrs Capacity. •Should Have Capacity To Store More Than 3.9 Lacs Straws Of 0.25 Ml ( With Canisters ) •Static Holding Time: Minimum 30 Days •Internal Diameter: Approx. 770 Mm •Empty Weight: Not More Than 200 Kg •Total Weight ( Including Samples ) : Not More Than 520 Kg •Total Height: Max. 1320 Mm •Daily Evaporation Rate Should Be Less Than 10 Ltr. / Day . •Should Be With Temp. Indicator, Low Temperature Alarm, Level Indicator, Low Level Alarm Indicator. •Should Have Option Of Auto Filling & Interface For Remote Monitoring •Heavy-Duty Casters To Provide Mobility Within The Lab. •The Equipment Must Be Quoted With One-Year Warranty Including Installation. The Concern Should Have Experience Of Installing Successfully At Least ( 03 ) Five Such Systems In Cmu Graded Semen Labs In India, For Which Necessary Documents Must Be Attached. The Satisfactory Working Report From The User Also To Be Attached. , 5 Ply Corrugated Card Board Box, Size-355Mm X 305 Mm X30mm , Ss 316 Storage Tank, Capacity-200Liters, With Accessories Ss 316 Storage Tank, Capacity-200Liters, With Accessories •M.O.C Of All Contact Parts : Ss 316 •M.O.C Of All Non-Contact Parts : Ss 304 Type Of Tank : Torispherical Dish End Vertical Tank •Dia: 700Ø / Shell Ht.: 550 Mm •Shell / Dish Thickness: 4 Mm Steam Heating Jacketed Tank Dia.800Mm X 4Mm Thk. •Shell Thickness: 4 Mm - Ss 304 •Tank With Heat Insulation Jacket With Rockwool Insulation - Dia. 900 Mm •Shell Thickness : 2 Mm - Ss 304 •Tank Internal Surface Mirror Polished. • Volume Sensor-1 No • Ph Sensor-1 No Accessories •Temperature Sensor - 1 No. •Steam Inlet Valve3 / 4 - 1 No. •Steam Trap Assembly3 / 4 - 1 No. •Steam Safety Valve With Pr. Gauge 1 No. •Control Panel- 1 No. •Ss 316 Diaphragm Valve, Size:1 -2 Nos •Vent Filter With Electrical Heating, 10 Long 0.2 Micron P7 Pp Cartridge-1 No. •Sight Glass Assembly3- 2 Nos •1 Tc Compound Pr. Gauge With 4 Dial, -1 To 10 Bar Pressure- 1 No. , Non Invasive Multiplexed Biomass Sensor System, Automated, Continuous, Real Time, Multi Vessel Biomass / Od Monitoring With Working Volume Done To 10 Ml, Biomass Sensitive Range Less Than 0.01 To Greater Than 600 Od Units, 12 Mm Diameter , Peristaltic Pump-201Vnotor-Stepper With Motor Torque-10Kg, Rpm- 1 To 200, Tube Size- 1 To 8 Mm, Flow Rate- 0.8 To 1800Ml / Min, Discharge Pressure - 2Bar, Maximum Discharge Height- 10 Litres, Dimension- ( L-325 X W-170 X H-250 ) Mm , Peristaltic Pump-401Vnotor-Stepper With Motor Torque-1 / 6 Hp, Rpm- 20 To 240, Tube Size- 8 To 19 Mm, Flow Rate- 250 To 20000Ml / Min, Discharge Pressure - 3Bar, Maximum Discharge Height- 30 Litres, Dimension- ( L-500 X W-250 X H-400 ) Mm , Absorbent Cotton Ip 500Gm Pkt ( Each ) , 500 Gm, Absorbency Not More Than 10Sec. , Cover Slip -Glass / Disposable, , Circular / Rectangular-100 Nos / Pkt ( 100 Nos ) , Cover Slip -Glass, Optically Clear, Distortion Free Surfac, Circular & Rectangular-100 Nos / Pkt , Cryovial 1.8Ml / 4.5Ml, Pp, Pkt Of 100, Material-Plastic , Disposable Needle-Strile 18 Gauze Needle Indivually Covered With A Cap In Blister Pack ( Each ) , D76 , Disposable Needle-Strile 20 Gauze Needle Indivually Covered With A Cap In Blister Pack ( Each ) , D76 , Disposable Needle-Strile 22 Gauze Needle Indivually Covered With A Cap In Blister Pack ( Each ) , D76 , Disposable Syringe With Needle-Sterile, Graduated, 10Ml With 18 G Needle Packed Individually ( Each ) , Disposable Syringe With Needle-Sterile, Graduated, 20Ml With 18 G Needle Packed Individually ( Each ) , Disposable Syringe With Needle-Sterile, Graduated, 2Ml With 20 G Needle Packed Individually ( Each ) , Disposable Syringe With Needle-Sterile, Graduated, 5Ml With 18 G Needle Packed Individually ( Each ) , Gauze Cloth , 100% Cotton, 90Cm X 16 Mtr ( Each ) , Gauze Cloth 90Cm X 16 Mtr Bandage 10 Cm X 3 Mtr ; 15 Cm X 3 Mtr , Haematocrit Tubes Acc. To Wintrobe, Soda Lime Glass, Straight Rim, Round Bottom, Double Numbered Scale In Red / White Colour, 105 Mm Subdivided In 1 Mm, Outside Diameter Approx. 6.5 Mm, Inside Diameter Approx. 2.9 Mm, In Cartons Of 20 Pcs. , Non -Absorbent Cotton Ip.500Gm Pkt ( Each ) , Pop Bandage 6 , Roller Bandage 10Cm X 3M, Gauze / Cotton, Pack Of 10 ( Pkt Of 10 ) , Roller Bandage 15Cm X 3M, Gauze / Cotton, Pack Of 10 ( Pkt Of 10 ) , Ph Paper , With Universal Indicator 1 To 14 , Glass Slides, Microscopic -Optically Clear, Distortion Free Surface , Bunsen Burner, Gear Type: Natural Gas, Material: Stainless Steel, Btu Output: 1200 Per Hour, Inlet Tube Od: 0.4375 Inches, Height:6 Inches , Digital Balance, Base On Electromagnetic Force Compensation Technology To Match The Highest International Standards . High Integrated Weighing Scale.Internal Adjustments Caliberation: Lb- C3 Type Caliberation. Motorized Internal Built In Weight Caliberation.Lb-C Series. Psas Fully Automatic Time And Temperature Controlled Internal Adjustments.Lb-C Series. Automatic External Caliberationlb-C / Lb Series Balance Protection.Smart Keystop Calliberation. Menu Lock ( Settings Password Protection ) . Overload Protection.Ip54protection Class. Overview: Display : Lcd High Contrast Display With Led Back Light. Large Glass Draft Shield With 3 Sliding Doors For Easy Acess To Items Being Weighted Key Pad Cover With Plastic Protection.. Tare Key Left / Right Sidefor User Friendly.Bubble Level Indication With Adjustableleg Uniform Surface Level.Balance Is Equipped With Rs232 Ouput Interface Connect Balance Pc Or Statistical Printer.Windows Direct Communication.. Usb Interface Optional. High Grade Materialconstruction Protects Against Chemicals And Rough Handling.Application: Piece Counting, Check Weighing , Percentage Weighing, Tantalization., Animal Weighing, Density Determination, Statistics, Custom Weighing Unit Formulation, Below Weigh Hook . Internal Caliberation: Model: Lb224c- Max- 220Gm, D-0.1 Mg, Pan Size-90Mm, Analaytical Balance:220Gm; Lb224c. External Calliberation:Lb224-220Gm D- 0.1 Mg, Pan Size 90Mm , Ai Tray, Stainless Stell 55-60Cm X25-30 Cm , Calf Puller Consist Of Precision Threaded Shaft Of 76 Long In Two Part With Breech Spanner For Pelvic Bones .Frictionjack Fittingwith Leg And Tractionbelt For Smooth Calf Delivery , Spay Snook Hook, Stainless Steel, Blunt 8 Inch Convex , Goblet Holding Forcep ( 18 ) , Stainless Steel, Lock Types Goblet Holding Forcep , Bipolar Thermocuttery Unit, Microcontroller Based Isolated Electrosurgical Generator Having Both Monopolar And Bipolar Outputs Designed For All Surgical Procedures, All Cut Modes Should Be Able To Adjust Output Power Depending On Tissue Density By Less Than 15% Or 5W, Whichever Is Greater. Should Have Three Coag Modes With Maximum Power Of 120W, It Should Have Three Bipolar Modes With Maximum Power Of 70W, The Unit Should Have Two Hand Switching And Two Footswitch Monopolar Outputs And One Hand Switching And Foot Switching Bipolar Output, The Unit Should Have Individual Digital Display Of Power For Bipolar, Monopolar Cut And Monopolar Coag. The Unit Should Not Have Rf Leakage Current More Than 150Ma. The Unit Should Not Have Rf Leakage Current More Than 150Ma. Two Years Of Comprehensive Warranty Including Bulbs Should Be Provided Along With Technical Support. It Should Follow International Safety Standard And Requirement With Ce Certification Or Usfda Approval. Operating And Service Manual Should Be Supplied. , Air Drill, High Speed Air Handpiece: 360, 000 Rpm Variable High Speed Handpiece, Low Speed Air Handpiece: Up To 20, 000 Rpm For Slow Speed Control., Complete Prophy Starter Kit, 3-Way Air Water Syringe: Allows The Operator The Ability To Rinse The Operative Site With A Stream Of Water Or Mist Or Dry / Blow Debris With A Stream Of Air. Foot Pedal Control: The Foot Switch Is A Durable Chrome-Plated Pedal. By Pressing Harder On The Foot Switch It Will Deliver More Power To The High Speed Handpiece Controlling The Speed Easily. , Burdizzo Castrator Small, Burdizoo Pattern Castrators For Small Animals Consist Of Two Jaws ( Upper Jaw And Lower Cord Stop Jaw ) With Two Levers Coupled With Nuts. Material For Small Animals:Material Carbon Steel Length ( Total ) 220-230 Mm Width Of Upper Jaws 42 Mm + / -2Mm Lower Jaw ( Cord Stop Jaw ) Cord Stop Of 5-8 Mm Ht. On Both Sides ( The Gap On Either Side Between The Upper Jaw And Lower Jaw ( Having Cord Stop ) Should Range Between 1To 1.5Mm ) Other Requirements:- 1. Tenderer For Imported Castrators Should Submit Proper Letter Of Authority From Their Principals. 2. The Offered Product Should Be In Indian Market For At Least 2 Years. 3. List Of Actual Users To Whom Same Brand Is Supplied Should Be Submitted With Copy Of Ratecontract / Supply Order Etc. 4. The Castrators Should Be Guaranteed For Satisfactory Performance For A Period Of Minimum One Yearfrom Date Of Supply, During Which They Shall Be Liable To Replace The Castrators At Their Own Cost, If Any Complaints Received From End User. 5. Castrator Should Not Leave Any Gap Between Upper And Lower Jaw During Castration. 6. The Castrator Should Be Supplied Along With Spanner. With The Help Of Spanner All The Nuts Ofcastrators Shall Be Alternatively Loosened And Tightened Five Times And Neither Nuts Nor Jaws Ofspanner Shall Show Any Sign Of Damage Or De Shape. 7. Name Of Manufacturing Company Should Be Permanently Embossed / Etched On The Body Of Castrator. , Drenching Gun, Usage / Application - Drenching For The Entire Herd, Automation Grade / Semi-Automatic, Finishing- Color Coated, Capacity- 23 Ml , Endo Tracheal Tube No 06, Size-6 Inch, Application- Hospital, Steribility- Sterile, Material- Pvc, Color- White Transparent , Endo Tracheal Tube No 08, Size-8 Inch, Application- Hospital, Steribility- Sterile, Material- Pvc, Color- White Transparent , Et Tube ( Size 2-12 ) , Size- 2Mm To 12 Mm, Cuff Type- Cuffed , Hartman Ear Forcep, Composition: Stainless, Customer Segment: Hospitals, Surgery Centers & Tissue Banks, Finish: Satin, Grade: Or, Item Type: Forceps, Length - Working ( Mm ) : 64, Length 1 - Tip / Jaw ( Mm ) : 6, Physician / Developer: Hartmann, Shape: Straight, Therapeutic Specialty: Otology, Usage: Reusable, Width 1 - Tip / Jaw ( Mm ) : 1.5 , Laryngoscope, Battery Handel, Throat Cannual, With 2 Attachment For Anesthesia. , Pm Kit, 1 ) Amputation Saw, Stainless Steel 2 ) Wire Saw With Handle, Stainless Steel ( Gigil Wire Saw ) 3 ) One Spare Wire For Wire Saw4 ) Post-Mortem Knife 5 ) Full Hand Gloves, Size-6 & 7 6 ) Post-Mortem Gloves, Latex, Size-6 & 77 ) Bone Hammer8 ) Bone Chisel9 ) Post - Mortem Scissor, Stainless Steel10 ) Scalpel, Stainless Steel11 ) Allis Tissue Forceps, Stainless Steel 1512 ) Sharpening Stone13 ) Probe, Stainless Steel14 ) Scissor, Dressing, Stainless Steel15 ) Bowel Scissors, Stainless Steel16 ) Retractor Four Prong Sharp 17 ) Retractor Four Prong Blunt 18 ) Dissecting Forceps, Toothed, Stainless Steel 19 ) Bone Holding Forceps, Stainless Steel 20 ) Abscess Knife, Stainless Steel22 ) Bone File23 ) Measuring Tape 24 ) Vice With Two Adjustable Jaws Made Of Iron For Cutting Heads Of Animal. , Small Animal Dental Instrument Set, D107 , Suture Cutting Scissor, Size- 6 Inch, Material- 304 Grade Stainless Steel, Material Grade- Aisi Grade, Automation Grade- Manual, Handle Type- Finger Ring , Opthalmoscope, Technical Specifications Of Opthalmoscope: 1. Dimensions: 5.12” L X 1.40” W X 3.75” H Without Eyecup ( With Eyecup: 1.45” L ) 2. Weight: 48 Lbs Without Eyecup; 50 Lbs With Eyecup 3. Focusing Range: -20 To +20 Diopters Other Features Of Opthalmoscope: 1. First Easy Entry Into Undilated Pupils 2. 5X Larger View Of The Fundus Vs. Standard Opthalmoscopes In An Undilated Eye 3. 25 Degree Field Of View Vs. Standard 5 Degree Field Of View 4. Greater Working Distance Improves Comfort For Both Practitioners And Patient 5. Patented Glare Extinguishment System Prevents Interference From Unwanted Glare And Reflections 6. Halogen Hpx Lamp Provides Bright 7. Compatible With All Existing Welch Allyn 3.5 V Power Sources 8. Digitally Capture, Store And Share Fundus Images By Combining With Eye Examiner For I Phone 4 / 4S, Eye Examiner For I Phone 6 / 6S And Eye Examiner For I Phone 6 Plus / 6S Plus Adapters 9. The Veterinary Pan Opthalmoscope Has A 3 Spot Sizes: Micro, Small And Large With Add On Magnifying Lens 10. One Year Warranty , Automatic Urine Analyzer , Veterinary Urine Analyzer For Veterinary Use Only And Not For Human For Species Canine, Feline And Equine, Based On Urine Strip Reflectance Technology To Measure All Parameters: Ph, Leu ( Leukocytes ) , Pro ( Protein ) , Glu ( Glucose ) , Ket ( Ketones ) , Ubg ( Urobilinogen ) , Bil ( Biliruben ) Single Test Urine Strip To Measure All Above Parameters, Very Light Weight And Not More Than 1 Kg With Calibration Strip For Calibration Of The Analyzer On Fix Frequency, Able To Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Maintenance Free And Ready To Use, Can Be Integrate With The Laboratory Information Management System ( Optional ) With In Built Thermal Printer To Printout All Parameters, Lcd Display For Operating The Analyzer Ce / Iso Approved , Automatic Blood Analyser, 5 Part Veterinary Hematology Analyzer For Veterinary Use Only And Not For Human, With Feature Of Direct Mode To Select The Canine, Feline, Equine, Bovine, Ferret, Gerbil, Rabbit, Pig, Mini Pig And Guinea Pig, Goat, Sheep, Llama, Alpaca, Camel, Dolphin, Based On Laser Flow Cytometry, Optical Fluorescence And Laminar Flow Impedance Technology To Measure All 26 Parameters: Red Blood Cell – Rbc, Hematocrit - Hct%, Hemoglobin - Hgb, Mean Corpuscular Hemoglobin Concentration - Mchc, Mean Corpuscular Volume – Mcv, Mean Corpuscular Hemoglobin – Mch, Red Cell Distribution Width – Rdw, Reticulocyte Count % , White Blood Cell – Wbc, Neutrophils - % And Neutrophils Absolute Numbers, Lymphocytes - % And Lymphocytes Absolute Numbers, Monocytes - % And Monocytes Absolute Numbers, Eosinophils - % And Eosinophils Absolute Numbers, Basophils - % And Basophils Absolute Numbers, Platelets – Plt, Mean Platelet Volume – Mpv, Platelet Distribution Width – Pdw, Plateletcrit Value – Pct, Requiring Less Than 30 ?L Of Anticoaguled Whole Blood, With Other Important Parameters Reticulocyte Hemoglobin, Band Neutrophil And Reticulocyte Count Also, Also To Report For Other Parameters Like Nucleated Rbc, Band Neutrophil Etc If Presence Suspected In Sample, Requiring Two Reagent Kits One External And One On Board, With Results In Two Minutes, Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Standby Mode, External Printer Interface Facility To Get The Printouts With All Parameters Including Dot Plot, Integrate With The Laboratory Information Management System For Analyzer Operation As Well As Patient Information With Patient Records, Us Fda / Ce / Iso Approved , Automatic Urine Analyzer , Veterinary Urine Analyzer For Veterinary Use Only And Not For Human For Species Canine, Feline And Equine, Based On Urine Strip Reflectance Technology To Measure All Parameters: Ph, Leu ( Leukocytes ) , Pro ( Protein ) , Glu ( Glucose ) , Ket ( Ketones ) , Ubg ( Urobilinogen ) , Bil ( Biliruben ) Single Test Urine Strip To Measure All Above Parameters, Very Light Weight And Not More Than 1 Kg With Calibration Strip For Calibration Of The Analyzer On Fix Frequency, Able To Storeall Consumables At Normal Room Temperature And No Refrigeration Required, Maintenance Free And Ready To Use, Can Be Integrate With The Laboratory Information Management System ( Optional ) With In Built Thermal Printer To Printout All Parameters, Lcd Display For Operating The Analyzer Ce / Iso Approved , Otoscope / Auroscope, Otoscope Set , Inverter, Capacity: 900 Va / 12V; Maximum Bulb Load - 756 Watt, Protection: Mcb For Protection From Input Mains & Safety Alarm To Warn In Case Of Short Circuit, Display: Lcd Display For The Status Of Power Back-Up / Battery Charging Time In Hours And Minutes, Inverter Battery Capacity: 80 Ah - 150Ah, Battery Type: Tall Tubular Inverter Battery , Nominal Voltage: 12V; Rated Capacity At 27Oc: 200 Ah , Bench Platform Stainless Steel Weighing Balance ( Capacity 200Kg ) , Calibration- Internal, Weighing Capaciy Upto 200Kg, Material-Ms , Restraining Chain For Dog, Dog Restraint Heavy-Duty Tie-Out Chain Featuring Two ( 2 ) Snap Hooks, Lengths: 3 – 4 Meters, 3-5 Mm, Stainless Stell , Electric Water Heater, Capacity- 25-50 Litres, Max Rated Pressure- 5-10 Bar, Power ( Kw ) -2-4 , Stretcher Trolly For Small Animals, Stainless Steel Stretcher Trolley For Small Animal , Removable Stretcher, Attachment Hooks, Stainless Steel Tray, Possibility Of Integrating A Coloured Carpet With Frame, 4 Retractable Handles As Well As 4 Castors, 2 Of Which Have Brakes. , Muzzel For Dog Restrain, For Dog , Needle Destroyer, Input Electrical Supply- 1Ph, 230 Vac ( + / - 10% ) , 50 Hz ( + / -3% ) , Enclosure- Abs Plastic Injection Molded, Power Consumption- 100 Watts ( Minimum ) In Continuous Rating, Destruction Capacity- Needles Of Size Dia 0.4 Mm To 1.6 Mm, Syringe Cutter- Hardened Stainless Steel Cutter, Collection Tray Capacity- Maximum 200 Nos Of Cut Syringe Hubs & Swarf Of Destroyed Needles. Overall Dimensions- 230 ( L ) X 150 ( W ) X 95 ( H ) Mm. Weight In Kgs: 2.0 Approx. , Pet Hair Trimmer, Low Noise Cordless With 4 Comb Guides Scissors Pet Hair Trimmer , Pet Nail Cutter, Stainless Steel Sharpness Blades, Secure Grip Rubber Coated Non-Slip Handles, Safety Lock Mechanism, Safety Guard , Staining Rack, Designed For The Staining Of Upto 25 Microscope Slides , Travis For Pet ( Squeeze Cage ) , Heavy Duty Metal Cage To Restrain Pet Dog / Cat ( Length-30, Breadth-16, Height-20 ) , Ot Table, Side End Control Ot Table Is Mobile, Hydraulic Designed For Small Animal Surgery. Adjustable Height Functions. The Surface Of The Table-Top Should Beplain And Is Smooth And Easy To Clean And Disinfect. The Base And Column Of The Table Should Be Of High Quality Medical Stainless Steel. Non-Reflecting Surface, Antibacterial & Easy To Clean. Height Adjustment By Stepping Foot Pedal Downward. Lateral Tilts, Trendelenburg, And Are Realized By Handle Manually. Equipped With Drain System. , Ambu Bag, 265Mm With 85Mm Diameter. Volume: 1500Ml Weight: 190G Components: - Connector, Complete, Towards Patient Valve ( 24.3 ) . - Outer Cover ( 24.2 ) - Inner Bag ( 24.1 ) - Inlet Valve For Combined Air And Oxygen: Complete With Silicone Membrane And Tube Connector For The Oxygen Reservoir ( 24.7 To 24.10 ) , Infrared Lamp, Power- 300W-4000W, Voltage- 110V-440V , Instrument Cabinet, Material- Aluminium, Size / Dimension- ( H ) 1800 X ( W ) 900 X ( D ) 400 Mm, Finishing- Polished, Number Of Doors- 2 Doors, Lockable, Thickness- 1 Mm, Handle Material- Aluminium , Nebulizer, Usage / Application- Hospital, Operation Mode- Table Top, Type- Soft Mist Inhaler , Oxygen Cylinder, 10 Lt , Electric Orthopaedic Bone Drill Machine, One Handpiece, One Charger, Two Batteries, One Sterilizing Channel, One Drill Chuck , One Aluminium Alloy Box, Axial Run-Out Of Cincentricity Is Within 0.05Mm, Rotating Speed Of About 1100 Rpm, Rotated Torque 3.3N / M , Bone Cutter, Material- Stainless Steel, Length- 9 Inch, Steel Grade Ss410, Surface Finish- Dull, Working Type- Double Action , Bone Hammer, Bone Hammer- Nylon Faced, Material- Stainless Steel, Handle Material- Fiber Handle , Bone Holding Forceops, Type- Surgical Equipments, Material- Stainless Steel, Size- 150 - 280 Mm, , Cow Anti Kick Bar, Automation Grade- Manual, Weight-1.7 Kg , Electrical Dehorner, Material- Stainless Steel, -With 24 Volt Safety Transformer, -Including Dehorning Tip Ø 18 Mm, -Very High Heat Release , Electrical Plaster Cutter, Blade Size-42.5 Mm And 62.5 Mm, Includes- 1Spanner And 2 Blades , Digital X-Ray Machine , High Frequency X-Ray Machine Suitable For General Radiography. X-Ray Generator: - High Frequency X-Ray Generator Having Frequency Of 110Khz Or More Should Be Provided. - Power Output Of Generator Should Be 4.2Kw. - Radiographic Kv Range Should Be 40 To 120Kv. - Ma Range ( Rad. ) : 110Ma Or More. - Exposure Time ( Rad. ) : 9 Ms To 5Sec. - Mas Range ( Rad. ) : 1 To 200Mas. Control: Attractive And Ergonomically Designed Control Panel With Total Soft Touch Switches For Various Operations. Having Following Functions & Indications. • Machine On / Off Switch • Digital Display Of Kv And Mas. • Kv And Mas Increase And Decrease Switches. • Ready And X-Ray On Switch With Indicators • Bucky Selection Switch. • Stand By And Exposure Release Switch. • Self Diagnostic Program With Indicators For:- ? Earth Fault Error ? Kv Error ? Filament Error ? Tube Head Thermal Overload. • X-Ray On Indicator. • Incoming Voltage Indicator. • Anatomical Programming Up To 216 Pre-Programmed Functions In Which Automatic Selection Of Technical Factors Is Done According To The Body Part Selection. A 2-Step Hand Switch With Dual Action For Exposure Release With Retractable Cord Should Be Provided For Taking Images From A Safer Distance. X-Ray Tube: • Mono-Block Version X-Ray Tube Head Should Be Provided. The Mono-Block Consists Of Stationary Anode X-Ray Tube, H.V. Transformer, Filament Transformer, H.V. Rectifiers And Capacitors, All Immersed In High Grade Oil With High Dielectric Strength. Mono-Block Tube Head Should Be Protected For Thermal Overload. • Manual Lbd ( Light Beam Diaphragm ) With Should Be Provided With Provision Of Auto Shutoff. Stand: Mobile Stand With 4-Wheel Design, Which Ensures Easy Mobility And Steering. The Spring Balance Stand ( With Fixed Tube Head Column ) Should Be Very Light In Weight With Tube Arm, Which Is Very Easy To Maneuver And Allows Smooth Movements Of Tube Head In Vertical Plane. Lead Lined Cassette Storage Box. This Mobile Stand Is Made To Withstand All Jerks While In Use Offering Unparalleled Reliability. Sbm Stand Can Be Easily Moved On Floor And Lock Should Be Provided To Lock Its Movement On Floor. The Equipment Occupies Minimum Floor Area And Is Capable To Be Taken Through Elevators With Ease. Power Requirement: Single Phase 230V, Ac And 50 Hz., 15 Amps With Line Regulation Of ±10%. Other Requirements: • The Company Should Be Iso And Icmedcertified. • The Unit Should Be Approved By Aerb. • The Unit Should Beeuropean Ce Certified From Notified Body. • The Company Should Have A Local Service Center. • The Company Should Have Proven Track Record In Govt. Sector. , Dryview Laser Imaging Film • Blue 7-Mil Polyester Base • Daylight-Load Film Cartridges • 125 Sheets / Cartridge Choice Of Film Sizes • The Dryview 5700 Laser Imager Should Support The Following Film Sizes 14 X 17 Inch ( 35 X 43 Cm ) 11 X 14 Inch ( 28 X 35 Cm ) 10 X 12 Inch ( 25 X 30 Cm ) 08 X 10 Inch ( 20 X 25 Cm ) Automatic Image Quality Control ( Aiqc ) • Should Ensure Consistency From Film To Film • Automatic With No User Intervention Network Connectivity • Integrated Dicom Interface Should Support Printing From Dicom Print Modalitites Network Connection • 10 / 100 / 1000 Base-T Ethernet Connection To Mange ( Should Support Jumbo Frame ) Dicom Sop Classes Supported • Basic Grayscale Print Mangement Meta Sop Class • Basic Color Print Management Meta Sop Class • Presentation Lut Sop Class • Basic Automation Box Sop Class • Verification Sop Class Dimension / Weight • Height: 19 Inch ( 47 Cm ) • Width: 24 Inch ( 61 Cm ) • Depth: 26 Inch ( 66 Cm ) • Weight: 120 Lbs. ( 54 Kg ) Power • 100-120 Vac; 50 / 60 Hz • 200-240 Vac; 50 / 60 Hz Operating Environment • Temperature: 59 To 91° F ( 15 To 33° C ) • Humidity 20 To 80% Rh, Non-Condensing • Magnetic Field < 50 Gauss • Altitude:-100 To 10000 Ft ( -30.5 To 3048 Mts ) User Interface • Simplified User Panel • User Documentation And Languages Supported: - English ( Uk ) - English ( Usa ) , X Ray Flim Viewer, Specification • Luminance: Max 100000 Cd / M² • Film Density: Max 4.0 D According To En 25580 / Astm E 1390 • Control Range: 1 – 100% • Viewing Screen: 225 X 80 Mm ( 10 X 24 Cm ) • Rated Power: 70 W • Power Supply: 90 – 264 V Ac / 24 V • Dimensions: 315 X 62 X 150 Mm • Lifetime Of Leds: 40000 H • Colour Temperature Of Leds: 5000 K • Housing: Anodized Aluminium Profile With Cooling Fins – Completely Closed To The Environment • Viewing Screen: Crystal Glass With 95% Translucency, Thermally Cured, Anti-Reflective Coating

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 10

Odisha View Result →

50.

Science and Technology #10055799 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 2

Tamil Nadu View Result →

TenderDetail

Loading tenders