View Bid Results For Hydraulic Tube Tenders

We found 4343 Bid Results related to hydraulic tube tenders. You can find Contractor details who won hydraulic tube tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–50 of 4343 tenders matching your filters

Defence #11473225 AOC

Bids Are invited for Main Bearing Set 08 Nos , Big End Bearing 06 Nos , Crank Thrust Washer 03 Nos , Piston Ring Std Set , Cylinder Sleeve Set 03 Nos , Engine Overhelluing Gasket Set , Head Gasket , Connecting Rod Bolt , Connecting Rod Bush 03 Nos , Inlet Vlave 06 Nos , Exhaust Valve 06 Nos , Valve Guide Inlet And Exhuast , Valve Seat Inlet And Exhuast , Valve Oil Seal Inlet And Exhaust , Valve Quarter Lock , Hydraulic Lash Adjuster Hla , Main Oil Seal Rear , Timing Cover Oil Seal Front , Timing Chain Assy , Timing Chain Adjuster Pad , Timing Chain Tensioner Assy , Crank Timing Gear Front , Belt Set Comp , Clutch Plate , Pressure Plate , Release Bearing Hydrulic , Pilot Bearing , Fly Wheel Assy , Differeantial Exhaust Pressure Pipe Upper Steel , Differeantial Pressure Sensor Rubber Pipe , Sensor Differeantial Pressure , Self Starter Mounting Patti Dust Shield Clutch , Abs Sensor , Fuel Pump Assy Fuel Module , Bms Sensor Of Battery Terminal , Rail Pressure Sensor , Oil Pressure Sensor , Invoirment Atmosphere Sensor Ambient Tempreature Sensor , Injector Nozzle Brash Wahser Winh O Ring , Diesel Filter , Air Filter , Oil Filter , Wheel Cylinder Assy Rear , Belt Tensioner Assy Pulley Idler , Turbo Charger Nut And Bolt , Anna Bond Tube Big Size Black , Wd 40 Spray Big Size , Enginecleaning Brush Big And Small , Araldite Tube , Bolt 12 No With Nut , Bolt 10 No With Nut , Turbo Charger Assy , Front Disc Brake Pad , Dosing Nozzle Cl With 10 No Bolt , Turbo Charger Cl With Set Packing , Thermostat Assy , Tappet Cover Flat Seal Ring , Water Pump Gasket Total Quantity : 162

Contract Date: Ref. Documents Contract Value : ₹ 1.41 Lakh

Government Departments No of Bidders 4

West Bengal View Result →

Home Affairs #11466542 AOC

Contract Date: Jul 02, 2026 Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

West Bengal View Result →

Shipping #11454433 AOC

Bids Are invited for Hydraulic Pipe Cl S For Od 10Mm Pipe , Hydraulic Pipe Cl Tosuit 30 Od Pipe Suitable For 400 Bar. , Hydraulic Pipe Cl To Suit 20 Od Pipe Suitable For 400 Ba , Hydraulic Pipe Cl To Suit 16 Mm Od Pipe As Per Doc. , Hydraulic Pipe Cl To Suit 20 Mm Od Pipe As Per Doc. , Hydraulic Pipe Cl To Suit 30 Mm Od Pipe As Per Doc. , Hydraulic Pipe Cl 25 Nb 30 Odx 3 Thk Ss Tube Total Quantity : 6307

Contract Date: Ref. Documents Contract Value : ₹ 4.59 Lakh

Boards / Undertakings / PSU No of Bidders 11

Goa View Result →

Defence #11454416 AOC

Bids Are invited for Spare Parts Farmtrac Pb02bn4881 Seal O Ring Liner , Gasket Engine Oil Sump , Gasket Egr Valve , Gasket Turbo Charger Oil Outlet , Gasket Turbo Charger To Adopter Ggo , Washer 20 Point 5 Aluminum Sealing Adapter , Rod Valve Push Rod E 3 , Seal Oil Crankshaft , Gasket Fip Gear Inspection Cover , Spacer Crank Pully , Seal O Ring Spacer , Bolt Water Fan , Gasket Water Pump , Bearing 620322 Fly Wheel , Seal Oil Crank Shaft Rear , Gasket Crank Shaft Rear , Belt Drwe Fan Belt , Gasket Hydraulic Pump , Filter Assy Second Dry For Turbo Charger , Filter Assy Engine Lube Oil , Injector Fuel Return Pipe , Fuel Filter Primary And Secondary , Gasket Fuel Tank , Gasket Cylinder Head , Gasket Air Intake Manifold , Gasket Exhaust Manifold , Gasket Cylinder Head Cover , Circlip Piston Pin , Bearing Connecting Rod , Gasket Tube Rocker Cover , Seal Valve Stem , Gasket Muffler Assy , Ring Thermostat Sealing , Thermostat Valve , Gasket Water Outlet , Seal O Ring Hub Front Axle , Seal Oil Half Shaft Front Axle , Seal Wheel Housing Front Axle , Tie Rod End Rh And Lh , Bush Pin Swevel Housing Upper , Bearing Sp Herical King Pin , Pin Upper King Pin Post , Disc Clutch Pto , Disc Clutch Main Drive , Kit Crank Shaft Main Bearing , Kit Thrust Washer , Filter Assy Hydraulic Lift Oil Intake , Seal O Ring , Gasket Timing Cover , Gasket Fip Gear Inspection Cover , Seal Oil Crank Shaft Front , Gasket Timing Gear Housing , Kit Piston Ring Set Ft 6065 , Hydraulic Filter , Banjo Washer Copper All Size 01 Pkt , Brake Pedal Spring , Water Separator Filter , Oil Cooler Pipe Rubber , Pin Sleeves Brake Pedal Pin , Bracket And Mounting Lh , Bracket And Mounting Rh , Pin Safety Split , Jubilee Clip 1 Inch , Bolt And Nut 12 No One Into Half Inch , Valve Grinding Stick , Self Solenoid Switch 12 Volt , Back Light Assy Lis , Insulation Tape , L T Wire 3 Mm , Meter Bulb Tube Type , Self Copper Bush , Plastic Paper , Horn Assy Total Quantity : 171

Contract Date: Ref. Documents Contract Value : ₹ 88,485

Government Departments No of Bidders 3

Jammu and Kashmir View Result →

Defence #11453263 AOC

Bids Are invited for Dak Box Side Bullet , Canvas Tool Bag Size 12Inchx14inch Bullet , Cold Patch With Tube , Cold Patch Tube Less Kit With Puncher , Cutting Plier 8 Inches Insulated , Dah With Handle , Cold Flat Chisel 6 Inch , File Flat Bastard With Handle 10Inch , File Flat Bastard With Handle 12Inch , First Aid Box Steel , Electric Tyre Inflator Air Pump For Light Vehicles , Fuel Funnel , Grease Gun Hand Operated , Hammer Ball Pin With Handle 2 Lbs , Inspection L With 05 Mtr Wire , Mechanical Jack Heavy Duty 10 Ton With Rod , Pad Lock With Duplicate Key , Pick Axe 4.5 Lbs , Plier Adjustable 8 Inch , Screw Driver , Screw Driver 6Inch , Screw Driver Phillips Star Type Head 6 Inch , Screw Driver Phillips Type 6Inch , Shovel Belcha , Spanner Adjustable 8Inch , Spanner De 8 Pic 8X9 To 21X23 , Spanner De 06 Pic Bullet , Spanner De 06 Pic 8X9 To 18X19 , Tire Pressure Gauge , Tool Box Steel , Towing Rope 10 Feet Long , Tyre Inflating Hose Air Line 1212 Truck , Tyre Lever , Valve Die , Car Washer Plunger High Pressure Pump With Motor Heavy Duty With All Accessories With 20 Meter Pipe , Gear Box Lifting Jack Hydraulic Long , Spray Gun , Hand Drilling Machine With Bit Set , Hydraulic Jack Trolley Type 10 Ton Capacity , Tyre Changer Machine Total Quantity : 162

Contract Date: Ref. Documents Contract Value : ₹ 4.31 Lakh

Government Departments No of Bidders 14

Arunachal Pradesh View Result →

Public Administrative Department #11441629 Price Bid

Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Suri-I Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 5

West Bengal View Result →

Science and Technology #11440503 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 2

Karnataka View Result →

Public Administrative Department #11437950 Technical Bid

Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Rajnagar Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 4

West Bengal View Result →

Power #11437796 Technical Bid

Re_Tubing Of 1 No Vent Condenser Tube Nest Of 210 Mw Lmw Design Turbine By 90_10 Cupro Nickel Tubes As Per The Material Specification , Labour Charges For Re-Tubing Of Vent Condenser Tube Nest Of 210 Mw Lmw Design Turbine By 90/10 Cupro Nickel Tubes. , Material Cost For Re-Tubing Of Vent Condenser Tube Nest Of 210 Mw Lmw Design Turbine By 90/10 Cupro Nickel Tubes.Material Specification: Material : 90/10 Cupro Nickel Tubes. Tube Size :Outer Dia-19.05 Mm , Inner Dia-16.63 Mm Total No. Of Tubes : 416 Nos Total Length Of Tubes: 3444.48Mtr Hydraulic Test: 12 Ksc , Transportation Charges Of Vent Condenser Tube Nest From Mtps-I To Work Spot (To & Fro) , Loading & Unloading Charges (Both Ends) , Insurance Charges (To & Fro) , Packing & Forwarding Charges (Both Ends) , Less Credit Estimate Value Of Eroded Admiralty Brass Tube (Scrap)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 2

Tamil Nadu View Result →

10.

Defence #11435479 AOC

Contract Date: Ref. Documents Contract Value : ₹ 2.07 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 5

Punjab View Result →

11.

Housing Urban and Rular Development #11432190 Price Bid

Tender for 2.6.1Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq M On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. - All Kinds Of Soil , 2.25Filling Available Excavated Earth (Excluding Hard Rock/Ordinary Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. , 2.27Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , 4.1.4 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1 :2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , 4.1.8 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mmnominal Size) , 4.17Making Plinth Protection 50 Mm Thick Of Cement Concrete 1 :3:6 (1 Cement : 3 Coarse Sand (Zone-Ill) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. , 5.1.2 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level [ 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii): 3 Graded Stone Aggregate 20 Mm Nominal Size) ] , 5.33.1.1 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana I Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate I Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Upto Plinth Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , 5.33.2.1 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana I Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate I Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , 5.22.6Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , 5.9.1Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Foundations, Footings, Bases For Columns , 5.9.5Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , 5.9.21Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers With Water Proof Ply 12 Mm Thick , 6.1.2Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1 :6 (1 Cement: 6 Coarse Sand) , 7.1.1Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1 :6:12 (1 Cement: 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level With : Cement Mortar 1 :6 (1 Cement: 6 Coarse Sand) , 8.14.4.1Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1 :3 (1 Cement: 3 Coarse Sand) Including Pointing In White Cement Mortar 1 :2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) :White Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 70 Mm Thick , 8.25.1Providing And Fixing 2Nd Class Teak Wood Plain Lining Tongued And Grooved, Including Wooden Plugs Complete With Necessary Screws And Priming Coat On Unexposed Surface. 40 Mm Thick , 8.25.4Providing And Fixing 2Nd Class Teak Wood Plain Lining Tongued And Grooved, Including Wooden Plugs Complete With Necessary Screws And Priming Coat On Unexposed Surface. 12 Mm Thick , 10.16.1Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes , 10.25.1Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete , 11.41.2Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , 12.34Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 24Kg I M3, 50 Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm)@ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , 12.50Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , 12.51.1 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , 12.51.2 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Flashings/ Aprons.( Upto 600 Mm) , 12.51.6 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Gutter (600 Mm Over All Girth) , 13.50.2Applying Priming Coat: With Ready Mixed Aluminium Primer Of Approved Brand And Manufacture On Resinous Wood And Plywood , 13.50.3Applying Priming Coat: With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , 13.62.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , 13.68.1French Spirit Polishing :Two Or More Coats On New Works Including A Coat Of Wood Filler , 16.69 Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineer In-Charge (Length Of Finished Kerb Edging Shall Be Measured To Calculate Volume For Payment). (Precast cement concrete Kerb Stone Shall Be Approved By Engineer-In-Charge). , 16.92Providing And Fixing 10X10x7.50 Cm Granite Stone Block Hand Cut And Chisel Dressed On Top, For Paving In Floors, Drains Etc. Laid Over 20 Mm Thick Base Mortar 1:4 (1 Cement : 4 Coarse Sand) With Joints 10 Mm Wide Filled With Same Mortar Including Ruled Pointing Etc. Complete As Per Direction Of Engineer-In-Charge. , 1-2Excavationinfoundationfor Retaining,Breastwallsetc, Inall Typesofsoils And Rocks Includingall Lead, Lift Anddisposal Of Surplusmaterial Asper Direction Of Engineer- In- Charge, As Per Drawing And Technical Specifications Clause 305.1 Of Mord Specifiction , 1-4 Randomrubblestonemasonry Laid In1:6Cement Andsandmortar, In Breastwalls,Retainingwalls,Parapets,Scuppers,Etc. Includingsupplyofall Material, Labour, T&Pand Royaltiies Etc. Complete As Per Drawingand Technical Specifications Clauses 702, 704, 1202 & 1203 Of Mord Specifiction , 1-3 Randomrubblestonemasonry Laiddry, Inbreastwalls, Retainingwalls, Etc. Including Supply Of All Material, Labour, T&P And Royaltiies Etc. Completeasper Drawingand Technical Specificationsclauses702, 704, 1202 & 1203 Of Mord Specifiction , 1-5 Handpackedstonefillinginbackofwallls Includingcostofallmaterials, Royality,T&Petc.Completeasperdirectionofengineer-In-Charge. (Asper Pwd Uttarakhand Specifications) , 2-2Concretewithcement, Coarsesandand40mmgaugestoneballast In Proportion1:4:8 In Foundationsand Floors Includingsupplyof Allmaterial, Labour Andt&Petc. Required For Proper Completionof Thework. Asper Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , 3-7Removal Of Unsuitable Soil With Disposal Upto 1000 M Removal Of Unsuitable Soil Including Excavation, Loading And Disposal Upto 1000 M Lead But Excluding Compaction Ground Supporting Embankment Subgradereplacement By Suitable Soil, Which Shall Be Paid Separately As Per Clause 303.5.2As Per Technical Specification Clause 302.3.11 , 12-9Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Providing & Supplying Of 25W Self Ballasted Led , Providing & Supplying Of Decorative Lighting Pole Of 4M , Providing & Fixing Of Aayush Wellness Based Signages/Boards Including Vertical Pole & Ms Sheet , Providing & Fixing Of Aayush Wellness Based 3D Paintings With Pop Texture Including Texture Paint

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Uttarakhand View Result →

12.

Housing Urban and Rular Development #11432178 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Uttarakhand View Result →

13.

Home Affairs #11427175 AOC

Contract Date: Jul 02, 2026 Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

West Bengal View Result →

14.

Health and Family Welfare #11425228 AOC

Procurement And Supply Of Certain Furniture Items For Telangana Diagnostic Hub At Nagarkurnool In Nagarkurnool District-1.00 Reception Table 1500 Mm X 900 Mm With 18Mm Prelaminated Board With 8 Mm Glass Front Side With Telangana Logo With Two Individual Key Boards, Including Cost And Conveyance Of All Material To Site, Labour Charges Supply To Site Including All Taxes ( Gst ) Complete For Finished Item Of Work. With 3 Years Warranty From The Date Of Supply. 8.00 Procurement And Supply Of High Rise Revolving Chair, With Bottom Of Round Balancing Surface Of Chair With Stainless Steel Material Along With Foot Rest, Ss Supporting Handles Along With Back Support In Semi -Arc Shape Covering Lether And Soft Material At Back Support Including Cost And Conveyance Of All Material To Site, Labour Charges Supply To Site Including All Taxes ( Gst ) Complete For Finished Item Of Work. With 3 Years Warranty From The Date Of Supply. 2.00 Office Table Of Size 4’X2’X30” With Three Draw Unit Of Size 350 ( W ) X 430 ( H ) X 560 ( D ) Mm In 0.6Mm Thickness And Front Cover In 0.6Mm Thick Crca Sheet ( Tata Of Sail ) With 6 Lever Lock With Plastic Handle. Table Top Made Of 18Mm Thick Pre-Laminated Board ( Plb ) With 2Mm Thick ( Edge Banding ) . The Under Structure Will Have Top Frame Of C Section 35X20x20mm In 16 Gauge Stand Of 4 Legs Connected With One Horizontal Supports In 16 Gauge Thick 1” Square Hr Tube, With 3 In One Chemical Cleaning Will Be Pre-Treated And Epoxy Powder Coated Paint 50-60 Microns, Along With Chair / Revolving Malaysian Medium Back Chair Seat And Back Moulded Rubber Foam With Pu Handles With Syncro Hydraulic Gas Lift And Tilting System And Pu Base With 5 Wheels Locking System With Fabric, Including Labour Charges Supply To Site Including All Taxes ( Gst ) Complete For Finished Item Of Work. With 3 Years Warranty From The Date Of Supply. 2.00 Computer Table Of Size 1200 Mm X 900 Mm Prelaminated Board, Left Side One Draw With One Cupboard With Locking System And Right Side Cpu Provision With Keyboard Along With Computer Chair / Revolving Malaysian Medium Back Chair Seat And Back Moulded Rubber Foam With Pu Handles With Syncro Hydraulic Gas Lift And Tilting System And Pu Base With 5 Wheels Locking System With Fabric, Including Labour Charges Supply To Site Including All Taxes ( Gst ) Complete For Finished Item Of Work. With 3 Years Warranty From The Date Of Supply.

Contract Date: Ref. Documents Contract Value : ₹ 1.18 Lakh

Government Departments No of Bidders 1

Telangana View Result →

15.

Health and Family Welfare #11425225 AOC

Procurement And Supply Of Certain Furniture Items For Telangana Diagnostic Hub At Wanaparthy In Wanaparthy District-1.00 Reception Table 1500 Mm X 900 Mm With 18Mm Prelaminated Board With 8 Mm Glass Front Side With Telangana Logo With Two Individual Key Boards, Including Cost And Conveyance Of All Material To Site, Labour Charges Supply To Site Including All Taxes ( Gst ) Complete For Finished Item Of Work. With 3 Years Warranty From The Date Of Supply. 8.00 Procurement And Supply Of High Rise Revolving Chair, With Bottom Of Round Balancing Surface Of Chair With Stainless Steel Material Along With Foot Rest, Ss Supporting Handles Along With Back Support In Semi -Arc Shape Covering Lether And Soft Material At Back Support Including Cost And Conveyance Of All Material To Site, Labour Charges Supply To Site Including All Taxes ( Gst ) Complete For Finished Item Of Work. With 3 Years Warranty From The Date Of Supply. 2.00 Office Table Of Size 4’X2’X30” With Three Draw Unit Of Size 350 ( W ) X 430 ( H ) X 560 ( D ) Mm In 0.6Mm Thickness And Front Cover In 0.6Mm Thick Crca Sheet ( Tata Of Sail ) With 6 Lever Lock With Plastic Handle. Table Top Made Of 18Mm Thick Pre-Laminated Board ( Plb ) With 2Mm Thick ( Edge Banding ) . The Under Structure Will Have Top Frame Of C Section 35X20x20mm In 16 Gauge Stand Of 4 Legs Connected With One Horizontal Supports In 16 Gauge Thick 1” Square Hr Tube, With 3 In One Chemical Cleaning Will Be Pre-Treated And Epoxy Powder Coated Paint 50-60 Microns, Along With Chair / Revolving Malaysian Medium Back Chair Seat And Back Moulded Rubber Foam With Pu Handles With Syncro Hydraulic Gas Lift And Tilting System And Pu Base With 5 Wheels Locking System With Fabric, Including Labour Charges Supply To Site Including All Taxes ( Gst ) Complete For Finished Item Of Work. With 3 Years Warranty From The Date Of Supply. 2.00 Computer Table Of Size 1200 Mm X 900 Mm Prelaminated Board, Left Side One Draw With One Cupboard With Locking System And Right Side Cpu Provision With Keyboard Along With Computer Chair / Revolving Malaysian Medium Back Chair Seat And Back Moulded Rubber Foam With Pu Handles With Syncro Hydraulic Gas Lift And Tilting System And Pu Base With 5 Wheels Locking System With Fabric, Including Labour Charges Supply To Site Including All Taxes ( Gst ) Complete For Finished Item Of Work. With 3 Years Warranty From The Date Of Supply.

Contract Date: Ref. Documents Contract Value : ₹ 1.18 Lakh

Government Departments No of Bidders 1

Telangana View Result →

16.

Health and Family Welfare #11425224 AOC

Procurement And Supply Of Certain Furniture For D-Hub Peddapally In Peddapally District-1.00 Reception Table With Chai Reception Table 1500 Mm X 900 Mm With 18Mm Prelaminated Board With 8 Mm Glass Front Side With Telangana Logo With Two Individual Key Boards Providing Computer Chair / Revolving Malaysian Medium Back Chair Seat And Back Moulded Rubber Foam With Pu Handles With Syncro Hydraulic Gas Lift And Tilting System And Pu Base With 5 Wheels Locking System With Fabric.Providing Computer Chair / Revolving Malaysian Medium Back Chair Seat And Back Moulded Rubber Foam With Pu Handles With Syncro Hydraulic Gas Lift And Tilting System And Pu Base With 5 Wheels Locking System With Fabric Inclusive Of Gst @ 18% With 3 Years Warranty From The Date Of Supply 8.00 High Rise Chairs High Rise Chair Of Size 48.3D X 52.1W X 81.3H Centimeters With A Built In 360 Degree Swivel Of Seat Height 58.42 Centimetres, Seat Width 38.1 Centimetres With Foot Rest Inclusive Of Gst @ 18% With 3 Years Warranty From The Date Of Supply 2.00 Consultant Table With Chair Office Table Of Size 4’X2’X30” With Three Draw Unit Of Size 350 ( W ) X 430 ( H ) X 560 ( D ) Mm In 0.6Mm Thickness And Front Cover In 0.6Mm Thick Crca Sheet ( Tata Of Sail ) With 6 Lever Lock With Plastic Handle. Table Top Made Of 18Mm Thick Pre-Laminated Board ( Plb ) With 2Mm Thick ( Edge Banding ) . The Under Structure Will Have Top Frame Of C Section 35X20x20mm In 16 Gauge Stand Of 4 Legs Connected With One Horizontal Supports In 16 Gauge Thick 1” Square Hr Tube, With 3 In One Chemical Cleaning Will Be Pre-Treated And Epoxy Powder Coated Paint 50-60 Microns. Providing Computer Chair / Revolving Malaysian Medium Back Chair Seat And Back Moulded Rubber Foam With Pu Handles With Syncro Hydraulic Gas Lift And Tilting System And Pu Base With 5 Wheels Locking System With Fabric. Inclusive Of Gst @ 18% With 3 Years Warranty From The Date Of Supply 2.00 Computer Table With Chair Computer Table Of Size 1200 Mm X 900 Mm Prelaminated Board, Left Side One Draw With One Cupboard With Locking System And Right Side Cpu Provision With Keyboard And Providing Computer Chair / Revolving Malaysian Medium Back Chair Seat And Back Moulded Rubber Foam With Pu Handles With Syncro Hydraulic Gas Lift And Tilting System And Pu Base With 5 Wheels Locking System With Fabric. Inclusive Of Gst @ 18% With 3 Years Warranty From The Date Of Supply

Contract Date: Ref. Documents Contract Value : ₹ 1.24 Lakh

Government Departments No of Bidders 1

Telangana View Result →

17.

Public Administrative Department #11418998 AOC

Tender For General-Aroor Gp 2024-25 Pro.No-145/25-Additional Construction In Mcf-General Civil Work - Constraction for machine Room 2 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared 3 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 4 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 5 OD304174/2024-2025:Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site 6 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 7 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 8 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 9 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 10 5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars 11 50.2.25.1:Filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge 12 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 13 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 14 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 15 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) 16 16.71:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge. 17 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete 18 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 19 13.3.2:20 mm cement plaster of mix:1:6 ( 1 cement : 6 fine sand) 20 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 21 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work 22 10.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover 23 10.7:Providing and fixing ball bearing for rolling shutters. 24 10.8.1:Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area 25 4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 26 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 27 51.2.3:Filling with Quarry Muck
Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade 28 16.78.1:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 29 16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 30 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete 31 9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 32 9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.

Contract Date: Jun 30, 2026 Contract Value : ₹ 21.18 Lakh

Government Departments No of Bidders 2

Kerala View Result →

18.

Railways #11414540 AOC

Supply Of Hydraulic Hosehydraulic Hose,Hydraulic Hose 1-1/2 Bore High Tensile Steel Double Braid With Outer Layer Rub Ber And Inside Rubber Tube Of Bore 1-1/2 With Female Swivel 1-1/2 Bsp Mild Steel Galvanized Fittings On Both Ends And Hose Suitable For Phosphate Ester Oil Application At 2250 Psi Of W Orking Pressure. 9000 Psi Maximum Bursting Pressure. Overall Length 7500 Mm. Make: Pix / Ind Omaksson / Hydroline / Parker / Polyhose / Arrowline / Aeroquip / Power Plus/Gates/Fenner. [ Warranty Period: 12 Months After The Date Of Delivery ] ] => Limited

Contract Date: Jun 30, 2026 Contract Value : ₹ 80,712

Government Departments No of Bidders 1

Karnataka View Result →

19.

Defence #11413644 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 16

Jammu And Kashmir View Result →

20.

Defence #11407729 AOC

Bids Are invited for Procurement Of Ship Fitting Section Items Cordless Wrench - Heavy Duty Cordless Impact Wrench Gds 18 V To 400 M20 Brushless Motor 1050 Nm 3700 Bpm 2X Battery Gba 18 V 5 Ah X Quick Charger , Pressure Testing Machine - Model Ti Ip 17155 1000 Psi Hydraulic Pressure Test Pump R2 1 1Nd Half Inch Hose With Pressure Gauge 0 To 70 Kg Cm2 , Circlip Plier Internal - Size 13 Inch , Screw Driver - Size 18 Inch , Gasket Cutting Machine With Accessories - Model Gc 42 Capacity 42 Inch Od , Hollow Punch Set - Size 12 Mm 15 Mm 20 Mm 25 Mm , Ring Spanner - Size 6 To 7 And 24 To 27 , Tube Cutter Heavy Duty - Model 93 021 22 Size 3Mm To 28 Mm Total Quantity : 9

Contract Date: Ref. Documents Contract Value : ₹ 61,675

Government Departments No of Bidders 8

Tamil Nadu View Result →

21.

Defence #11406770 AOC

Bids Are invited for Mcb Double Pole 32 S , Mcb Double Pole 16 S , Mcb Single Pole 6 S , Switch Socket Combination 5 Pin 15 S , Switch Socket Combination 5 Pin 5 S , Tube Light Led 1200Mm 20W , Tube Light 10W , Led Bulbs 20W , Led Bulbs 9W , Cgi Sheet 8Ft X 3Ft , Aluminium Door Handle 150Mm , Aluminium Hydraulic Door Closers , Ply Wood 3 Ft X 6 Ft 8Mm , Ply Wood 6 Ft X 4 Ft 8Mm , Cp Bib Cock 15Mm , Sand Bags , Indian Type Toilet Seat Steel , Keroheater 22 G Wicks , Keroheater 33 G Wicks , 1.5 Sq Mm Electric Wire , 2.5 Sq Mm Electric Wire , Switch Socket Comb 16 , 2 Core Wire , Bib Cock , Fire Ball , Fire Extinguisher 02 Kg , Stop Cock , Mirror , M Seal , Insulation Tap , Battery 12V 150Ah For Aerial Cableway , Angle Holder , Pvc Cashing Caping 6Ft 25Mm , Pvc Cashing Caping 6Ft 32Mm , Nails 4 Inch 3 Inc 2 Inch , Aluminium Door Handle 150Mm Size , Aluminium Door Stopper , Aluminium Hydraulic Door Closer , Cp Bib Cock 15Mm Dia , Cp Angle Cock , Pvc Waste Pipe 32Mm Dia For Wash Basin , Pvc Connection 15Mm Dia 600Mm Long , White Cement , Water Stopper For Tanks , Hesco Basket , Switch 6 , Switch 16 , Tapping Screw 2.5 Inch , Cp Angle Cock , Tiles 600Mm X 600Mm , Tiles 1 Ft X 1 Ft , Western Wc , Wash Bashin , Tap , Flushing Cistern , Celing Light , Health Faucet , Wc Seat Cover , Sparking Plug , Rope Medium , Sensor Wire 3Kva Honda , Whully Accessory 3 Kva Honda , Carburator , Ignition Coil , Oil Filter , Fuel Filter , Fan Belt , Piston K2 , Piston Petrol , Fuel Pipe , Wall Assembly , Pressure Glass , On And Off Switch , Fuel Injector Pump Gen Set 10 Kva , Fuel Pump Gen Set 10 Kva Total Quantity : 1978

Contract Date: Ref. Documents Contract Value : ₹ 9.04 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 5

Jammu And Kashmir View Result →

22.

Health and Family Welfare #11406090 AOC

Bids Are Invited For Transparent Celestial Sphere , Barn Door Tracker , Jantar Mantar Model , Sundial Set Model , Telescope , Refractor Telescope (76 Mm) , Reflector Telescope (50 Mm) , Dobsonian Telescope (150 Mm) , Computerized Telescopem , Solar Filter , Rocket Launcher , Ring The Planet Setup , Air Pump With Nozzle , Latitude Finder , Lens Kit , Gnomon Base Rod , Solar View Goggles , Planisphere , Green Laser , Astronomy Binocular , Spectroscope , Diy Solar System Kit , Moon Phase Puzzle , Discovering Skies Puzzle , Shadow Show Game , Solar System Cards , Zodiac Wheel , Sundial Template , Diy Curiosity Rover , Building Megastructure Kit , Diy Space Satellite , Eclipse Model , Hydraulic Robotic Arm Kit , Day Night Board Game Model , Pop Rocket , Moon Poster , Ar/Vr Headset With Software , Moon Crater Base Moon Model , Hydro Rocket Launcher , Launcher Stand , Portable Air Compressor , Globe , Light Up Alien Kit , Diy Moon Buggy , Food-O-Naut Kit , Bluetooth Speaker (V3) , Sky Map Poster , Constellation Puzzle Set , Torch– Light Shadow Kit , Colour Tube , Light Shadow Game Pieces , Light Shadow Game Sheet , White Screen , Dress Up Astronaut Kit , White Torch , Experiment Boards , Animals In Space Cards , Constellation Guide Book , Lunar Cycle Demonstrator , Iss Model , Planet Weight Machine , Meteorite Demonstration Kit , Gslv/Pslv Model (5 Ft) , Alt-Az Star Tracker , Motorised Solar System , Scientist Photo Frame , Surya Yantra , Interior Design Furniture , Lms Platform (2 Years) , Training (Central+ On-Site) , Logistics (Transport, Installation, Handling) Total Quantity : 2480

Contract Date: Ref. Documents Contract Value : ₹ 79.88 Lakh

Government Departments No of Bidders 4

Jammu and Kashmir View Result →

23.

Public Administrative Department #11403271 Technical Bid

Tender for E - Tender - Supply Of Surgical Instruments, Laboratory Instruments, Medicines, Office Requirements Or The Use At Animal Birth Control Centreat Zone-12 Of Veterinary Department Of Greater Chennai Corporation. , Ot Shadow Less Lamp(Ceiling Mounted Led Light, Dual Arm - 2 Lamp) , Veterinary Hydraulic Ot Table(Z- Type, With Cushion, Bucket Attached) , Electrosurgical Unit (Diathermy Machine) , Suction Apparatus , Medicine Crash Trolley , Medicine Cabinet S.S With Glass, 5 Shelves , S.S. Instrument Trolley , S.S. Examination Table With Iv Stand Facility , S.S Rotating Chair- 3 Legs, Patient Stool , S.S Kidney Tray -10 Inch , S.S Instrument Tray-12*8 Inch , S.S Mayo Instrument Trolley (Height Adjustable) , S.S Veterinary Stretcher With Strap And Wheels , I/V Stand- Standard Size , S.S Fogging Machine , Uv Lamp For Theatre Sterilization (36W) , Vertical Autoclave- 12X22, Double Bin,220 L , Autoclave Tape , Autoclave Bin , Needle Cutter- Electric, Syringe Destroyer , Thermal Fogging Liquid- 5 Lt , Stethoscope , Digital Thermometer , Vaccine Storage Box , Blue Patient Privacy Screens For Pet Clinic , Drape Cloth Cotton For Ot- Blue & Green, Reusable (Meter) , Window Cloth-Surgical Hole Towel, Small Size, Reusable , Medical Scrub Suite (Green) Size-M,L, Xl, Washable (In Each Size) , Surgical Gown (Blue )- Size - M, L, Xl (In Each Size) , Doctor Coat White Full Sleeves - M,L,Xl (In Each Size) , Reusable Head Cap , Instrument Washing Liquid - 5 Lt , Artery Forceps - S.S - Straight - 6 , Artery Forceps -S.S - Curved - 6 , Mosquito Forceps -S.S - Straight , Allis Tissue Holding Forceps -S.S - 6 , Needle Holding Forceps -S.S - 6 , Metzenbaum Scissors - S.S - Straight-6 , Mayo Scissors - S.S- Straight-6 , Thumb Forceps - S.S- Rat Tooth-6 , Bp Handle -S.S No. 4 , Towel Clamp- S.S , Spay Hook- S.S , Suture Needle - Reverse Cutting Needle (1 Packet) , Veterinary Hamatology Auto Analyzer - 3 Part , Standard Edta Tubes For Haematology Auto Analyzer -2Ml , Liquid Probe Cleaner Reagent Kit For Haematology Analyser , Card For Lyse , Card For Diluents , Diluents Solution 20Ltr , Lyse Solution 500Ml , Office Table For Doctors , Executive Chair- Mid Back Mesh Chair , Visitor Chair - Carbon Steel , White Display Board , Display Slates , E. Collar, Size 3 & 4 , Feeding Bowl For Dogs , Coconut Broom , Buckets (20L) With Mug , Plastic Broom , Mop With Stick , Wiper With Stick , Dish Washer Scrub , Door Mat- Rubber , Floor Mat (Cloth) , Hand Wash (200Ml) , Scented Phenol (5L) , Sanitizer (200Ml) , Kennel Disinfectant(5 Lt) , Formaldehyde 30 Lt , Fly Repellent Solution 500Ml , Floor Cleaning Brush With Handle , Tile Cleaning Brush , Rotor Bin With Cover , Spray Bottle 500 Ml , Wall Clock , Flask (2L) , Cup And Saucer Set , Dust Pan , Trimmer , Vacuum Cleaner Mini , Gum Boots Medium Size , Ladder , Screen Cloth (Meter) , Methylene Blue Solution For Preserved Organ Disposal (Bottle) , Shaving Blade Holder For Surgical Site Preparation , Shaving Blade For Surgical Site Preparation 10 Blades Per Packet (300 Packs) , 5 Kg Cylinder (Lpg) , Flame Gun , Detergent Liquid For Washing Machine 5 Lt Can , Waste Bins-Plastic- 30 L Plastic, Pedal Type , Bio Medical Waste Bin - Black, Yellow, Red, Blue, Pedal Type, Large Size , Bio-Medical Waste Bag, - Red, Large Size, Black, Blue, Yellow (Pack Of 20) , Cotton Towel - Standard Size , Examination Gloves (Non Sterile)- L, Xl Pack Of 100 , Industrial Adjustable Metal Shelf Rack Medicines , Automatic Hydraulic Double Speed Door Closer , S.S Cloth Hanger For Ppe Suit Room , S.S Chrome Towel Ring Hanger For Toilet , Plastic Mirror Cabinet With Shelves For Toiletries , Automatic Soap Dispensers -1000 Ml , Manual Soap Dispensers -1000 Ml , Plastic Foldable Platform Trolley With Wheel , Ro Water Purifier 50 Lt Capacity , Hose Pipe - 1/2 Inch (30 Meter) , Metal Shoe Rack In Ppe Suit Room, 4 Tier , Fire Extinguisher - Powder Type 6 Kg , Fly Catcher For Insect Control , Rubber Slippers - 6 & 10 Size , Cloth Drying Stand For Linen Room , Plastic Swing Lid Small (16L )Dustbin , Large Plastic Dustbin For Collecting Waste- 75 L , Plastic Super Jumbo Crates 50 And 100 Lt , Mop With Bucket - Wringer Trolley 50 Lt , Organ Storage Barrel For Preservation- Plastic With Lid 50 Lt , Aluminium Vessel For Cooking-60 Lt With Ear & Lid , Ladle For Cooking - Aluminium / Iron, 3 Feet , Aluminium Bucket For Carrying Food - 20 Liter , Single Burner Fort Kitchen- Stainless Steel , Lpg Cylinder , Washing Machine - 7.0 Kg,Top Load Within Build Hot Water Facility , Washing Machine Stand , Fridge Double Door - 270 Lt , Fridge Stand , Stabilizer , Weighing Scale For Preparation Area-100 Kg-2X2 Ft , Inverter- Luminous Inverter & Battery Combo, Office & Shops

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Tamil Nadu View Result →

24.

Defence #11392548 AOC

Bids Are invited for Eme Sp Anabond Tube , Flat Patti , Angle Iron , 10 Ton Hydraulic Jack Repair Kit , 3 Ton Hydraulic Jack Repair Kit , Jack Wheel , Seat Cover Tata Yodha , Body Matting Mg , Everest End Joint , Rst Ms Socket , Angle Iron 2 And Half Inch , Safety Goggles , Plasma Nozzle , Welding Set Connector , Welding Machine 200A Mag Mma 3 In 1 Total Quantity : 506

Contract Date: Ref. Documents Contract Value : ₹ 77,196

Statutory Bodies & Commissions/Committees No of Bidders 3

Jammu and Kashmir View Result →

25.

Public Administrative Department #11382445 AOC

Tender For Annual Plan-Pro.No 315/26 Crematorium Construction In Avanur Gp 2025-26-Avr 315/26-General Civil Work - Building construction 2 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil 3 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 4 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 5 OD316310/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site . Modified from 60.7.1 6 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) 7 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 8 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 10 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 11 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 12 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 13 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 14 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15°landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III)derived from natural sources: 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 15 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 16 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 17 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 18 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work 19 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete 20 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 21 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 22 21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness(weight not less than 20 kg/sqm) 23 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 24 11.20.2:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 % Grey cement 25 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 26 17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap 27 17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid 28 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 29 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 30 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 31 50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall 32 50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall 33 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 34 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 35 17.29:Providing and fixing 100 mm sand cast Iron grating for gully trap. 36 OD325929/2025-2026:Supply and fixing PVC frame and shutter for doors of size of (0.8mX2.00m)including cost of labour and materials as per direction of departmental officers. 37 OD326277/2025-2026:Supplying and fixing Pressed Steel Door of standard pattern with frames as per profile of IS:4351 of section 105*60mm using 18G (1.2mm thick CRCA) sheet and shutters made of section 75*30mm of outer styles and horizontal members and then inserted with enclosed and stiffened sheet 26CR as per the specification with zinc chromate primer including all charges of fittings, conveyance etc, complete.steel door of size 120*210 cms 38 51.19.ST2:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 2. 15 to below 25 flush capacity 39 OD326287/2025-2026:Ferrow cement soak pit 75 cm dia and 75 cm height 40 50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 41 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 42 10.6.2:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover 43 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 44 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 45 OD326395/2025-2026:supplying and fixing 150mm half cut section with brackets at the end of sheet or tiled roof for rain water collection including all cost and materials , conveyance, labour charges etc. 46 OD330008/2025-2026:Roofing with Premium Aluzinc roofing powder coated Tiled design sheet with matte finishing 0.5mm thick or nearest available thickness with overlaps of 150mm at ends and G I hook or screw or crank C I bolts and nuts including plain and bitumen washers etc completed.

Contract Date: Jun 27, 2026 Contract Value : ₹ 30.93 Lakh

Government Departments No of Bidders 3

Kerala View Result →

26.

Railways #11381469 AOC

Supply Of asbestos cover hydraulic hose , asbestos cover hydraulic hose to as per sae 100r8 type at inside synthetic rubb er tube with four spiral wire reinforcement separated by synthetic rubber layer outer cov er will be of oil, weather and abration resistance synthetic rubber material hose, length: 1500mm, id: 3/4 with female swivel 3/4 bsp female swivel nut fitting and male adaptor both end, thermoplastic hose. working pressure: 80 kg/cm2, make: parker or eaton or parekh or gates or poly hose. or similar note: material test certificate for quality of hose and pressure test shall accompany the supply. [ warranty period: 18 months after the date of delivery ] ]

Contract Date: Jun 27, 2026 Contract Value : ₹ 31,860

Government Departments No of Bidders 1

Bihar View Result →

27.

Defence #11370640 AOC

Bids Are invited for Tata Jd 315 Se Spare Parts Joint - 367832171 , Tube - X31xcpk3763d021 , Seal - X31xcpk338117135 , Hose - X31xcpk33872532 , Joint - X31xcpk3686t006 , Joint - X31xcpk3681as021 , Pipe Oil Assy - X31xcpk3576m005 , Kit Water Pump Repair - X31xcpkpiu7lw0149 , Belt - X31xcpkl07de00012 , Joint - X31xcpk3683d006 , Hose - X31xcpk33853123 , Joint - X31xcpk36833144 , Clip - X31xcpk36568145 , Hose Elbow - 61161Telcontd001652 , Filter Element Inner - 61161Telconte01665 , Filter Element Outer - 61161Telconte01666 , Hose - 61161Telconte01931 , Cl - 61161Telcontd011602 , Cl - 61161Telconted239 , Gasket - 61161Telcon3124921080 , Hose Lower - 61161Telcontc00727 , Hose Upper - 61161Telcontd01552 , Grommit - 61161Telcontd158677 , O Ring - 61161Telconr26375 , Grommit - 61161Telconte01666 , Boot - 61161Telcont22241 , Boot - 61161Telcont130086 , Grommit - 61161Telcont63817 , Hydraulic Hose 915 Lg - 61161Telconat171637 , Hose - 61161Telconte02214 , Air Filter - 61161Telconat101565 , Oil Tube - 61161Telconte02638 , Element Filter - 61161Telcont144879 , Oil Filter - 61161Telcon179323 , Air Filter Element Inner - 61161Telconed1665 , Air Filter Element Outer - 61161Telconted1666 , Oil Filter - 61161Telconti07515 , Fuel Filter Element - 61161Telconte02516 , Wiper Motor - 61161Telcontn261087404904 , Oil Press Switch - 61161Telconte00429 , Horn - 61161Telcont257454209969 , Switch Park Brake - 61161Telcontd01870 , Elec Press Gauge - 61161Telcontd01187 , Elec Press Gauge - 61161Telcontd01188 , Fuel Gauge - 61161Telcontd01190 , Ammeter - 61161Telcontd01197 , Warning L - 61161Telcontwe00392 , Engine Oil Press Amd L - 61161Telcontnwe00315 , Indicator L - 61161Telconte02057 , Indicator - 61161Telconte02058 , Starter Push Bnutton Switch - 61161Telcon257354509927 , Boot - 61161Telcont145629 , Shank Tooth - 61161Telconu43792 , Boot - 61161Telconte23p , Hydraulic Hose - 61161Telconre20342 , Hydraulic Hose - 61161Telconf2863r , Hydraulic Hose - 61161Telconat173130 , Hydraulic Hose - 61161Telconat173134 , Hydraulic Hose - 61161Telconat173135 , Hydraulic Hose - 61161Telcon176541 , Hydraulic Hose - 61161Telconat173101 , Hose - 61161Telconat180140 , Ball Joint - 61161Telconat165087 , Gasket - 61161Telconat154093 , Ball Joint - 61161Telconat169087 , Seal Kit - 61161Telconat168632 , O Ring - 61161Telcont77613 , O Ring - 61161Telconr264448 , Seal Kit Relife Valve - 61161Telconat178359 , Seal Kit Spool Seal - 61161Telconat178372 , Seal Kit Relife Valve - 61161Telconat178359 , Seal Kit Spool Seal - 61161Telcontd178371 , Seal Kiy Relief Valve - 61161Telcontd178360 , Kit Relief Valve - 61161Telcontd178372 , Seal Kit - 61161Telcontd178359 , O Ring - 61161Telconat118685 , Seal Kit Spool Seal - 61161Telcontat178372 Total Quantity : 231

Contract Date: Ref. Documents Contract Value : ₹ 4.24 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Ladakh View Result →

28.

Railways #11370257 AOC

Contract Date: Jun 26, 2026 Contract Value : ₹ 4,956

Government Departments No of Bidders 1

Assam View Result →

29.

Defence #11358822 AOC

Bids Are invited for Heigh Back Revolving Chair Adjustable Height With Wheels , Rotary Manual Hand Oil Steel Barrel Pump , Aircraft High Visibility Protective Marshlling Reflector Belt , Hydraulic Trolley Jack Heavy Duty For All Heavy Vehicals Capacity 10 Ton , Flexible Pneumatic Pipe Polyurethane Spiral Tube With Air Flow Gun , Metal Shoe Rack Adjustable And Stackable Waterproof Open 4 Tier Total Quantity : 49

Contract Date: Ref. Documents Contract Value : ₹ 1.70 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 4

Ladakh View Result →

30.

Housing Urban and Rular Development #11351625 Technical Bid

Tender for Development Of Landscaping Work Of Tower Of Justice In Distt. Gurugram (Additional Work). , Installation Of Submersible Tubewell Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart/ Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer-In-Charge, Up To 90 Metre Depth Below Ground Level. All Types Of Soil 400 Mm Dia (Hsr 33.6.1.3) , Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart/ Bore Log, Including Hire And Running Charges Of All Equipments, Tools, Plants And Machineries Required For The Job, All Complete As Per Direction Of Engineer -In-Charge, Beyond 90 Metre And Up To 150 Metre Depth Below Ground Level. All Types Of Soil 400 Mm Dia (Hsr 33.7.1.3) , Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Unplasticised Pvc Medium Well Casing (Cm) Pipe Of Required Dia, Conforming To Is: 12818, Including Required Hire And Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer -In-Charge. 200 Mm Nominal Size Dia (Hsr 33.8.3) , Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well Unplasticised Pvc Medium Well Screen (Rms) Pipes With Ribs, Conforming To Is: 12818, Including Hire And Labour Charges, Fittings And Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer-In-Charge.200 Mm Nominal Size Dia (Hsr 33.9.3) , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc. 50 Mm Dia Nominal Bore (Hsr 22.88.6) , Supply And Jointing Three Core Submersible Flat Cables Of Approved Make With Bare Bunched Copper Conductor Insulated And Sheathed With Pvc For Submersible Pump Motors /Fountain Lights Etc With Voltage Grade 1100 Volts Marked With Is:694, 1990 Including Cost Of Jointing, Materials As Well As Carriage, Loading, Unloading Etc. Complete In All Respect Up To The Entire Satisfaction Of Engineer- In-Charge. Submersible Copper Cable 3 Core 1.5 Sqmm (Hsr 24.5.1.2) , Supply And Lowering Isi Mark 5 Hp Single Phase Submersible Motor With Pump Of Lubi, Ksb, Crompton, Texmo Etc (Along With Nylon Rope) (Ns) , Providing And Fixing Suitable Size Threaded Mild Steel Cap Or Spot Welded Plate To The Top Of Bore Well Housing/ Casing Pipe, Removable As Per Requirement, All Complete For Bore Well Of: 200 Mm Dia (Hsr 33.16.3) , Providing And Fixing M.S. Clamp Of Required Dia To The Top Of Casing/ Housing Pipe Of Tube Well As Per Is: 2800 (Part I), Including Necessary Bolts & Nuts Of Required Size Complete. 200 Mm Clamp (Hsr 33.17.3) , Providing And Fixing Bail Plug/ Bottom Plug Of Required Dia To The Bottom Of Pipe Assembly Of Tube Well As Per Is:2800 (Part I). 200 Mm Dia (Hsr 33.18.3) , Supply And Fixing Isi Mark Panel Board Of 5 Hp Of Bch, Cuttler Hammer, L&T, Boparai Etc. With Lock & Key Steel Box (Ns) , Supply And Fixing Of 16 Mm Aluminium Cable 3 Core Of R.R./Havells/Fenolux Make.(Ns) , Supplying, Filling, Spreading And Levelling Gravels Of Size Range 5 Mm To 10 Mm, In The Recharge Pit, Over The Existing Layer Of Boulders, In Required Thickness, For All Leads And Lifts, All Complete As Per Direction Of Engineer-Incharge.(Hsr 33.13) , Hire Charges For Hydraulic Excavator/Loader Like Jcb/Pock Lain, Hitachi Etc With All Accessories Having Bucket Capacity 1. Hire Charges Forjcb With Bucket Capacity Of 0.4 Cum (Hsr 14.51.1). , Hire Charges Of Tractor With Trolly, Driver & Diesel. (Ns)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Haryana View Result →

31.

Railways #11350136 AOC

Supply Of Ferrule Hydraulic Flareless Tubeferrule Hydraulic Flareless Tube,Ferrule Hydraulic Flareless Tube 274228 C Spec:Misc:709 [ Warranty Period: 30 Months Aft Er The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 L Acs ] ]

Contract Date: Jun 25, 2026 Contract Value : ₹ 33,021

Government Departments No of Bidders 1

Uttar Pradesh View Result →

32.

Defence #11344943 AOC

Bids Are invited for Self Ballasted Led L S (Led Bulb) (V3) Conforming To Is 16102 (Part 2) (Under Bis Scheme - Ii) , Led Bulkhead Light , Led Batten Light (Led Tube Light) (V2) , Led Batten 20 W Invertor , Pvc Aluminium Cable 2 X 10 Sq Mm , Mccb Tpn 400 4 Pole 50 Ka , Plate Rack Stainless Steel Size 900X 750 Mm , Ci Bracket For Kitchen Sink , Gi Pipe Medium Grade 20 Mm , Gi Pipe Medium Grade 15 Mm , Hydraulic Door Closer , Waste Coupling Brass 32 Mm , Solar Road Stud , Pre Laminated Particle Board Of Size 8X4x18mm , Plywood Commercial 7X3x12 Mm , Plywood Commercial 8X4x6 Mm , Plywood Commercial 8X4x12 Mm , Plywood Commercial 8X4x4 Mm , Fevicol 1 Kg , Foam Cushion For Sofa Seat Of Size 530 X560x100 Mm Thick Of 40 Density , Pvc Seat For Chair Dining With Holes , Seat And Back For Writing Map , Pvc Seat And Back For Chair Verandha , Ht Xlpe Cable Size 95 Sq Mm 3 Core , Desert Cooler Steel Body , Double Angle Valve 15 Mm Cp Brass , Cp Shower Rose 15 Mm , Sliding Door Bolt 100Mm , Sliding Door Bolt 200Mm , Pre Laminated Particle Board Of Size 8X4x18 Mm , Plywood One Side Teek Wood 8X4x4mm , Exhaust Fan 300 Mm , Exhaust Fan 380Mm , Exhaust Fan 450 Mm Total Quantity : 8472

Contract Date: Ref. Documents Contract Value : ₹ 83.94 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Punjab View Result →

33.

Defence #11342817 AOC

Tender For Term Contract For Artificer Works In Domestic Area At Af Stn Bkt; 1. Brick work (of any size and shape) Cum 600.00 2. Old U/S floor/wall tiling Sqm 2.00 3. Old U/S Brick Bats Cum 250.00 4. Old U/S Ceiling Board Sqm 12.00 5. Old U/S Chowkats with shutter area n.exc 1.5 sqm alongwith iron mongery Each 200.00 6. Old U/S Chowkats with shutter area exc 1.5 sqm but n.exc 4.00 sqm Each 250.00 7. Old U/S double action floor door spring Each 30.00 8. Old U/S Brass round lock Each 15.00 9. Old U/S 15MM Bore GI Pipe with fittings RM 13.00 10. Old U/S 20mm bore GI Pipe with fittings RM 14.00 11. Old U/S 25mm bore GI Pipe with fittings RM 15.00 12. Old U/S 40MM Bore GI Pipe with fittings RM 16.00 13. Old U/S 75mm bore Gi pipe with fittings RM 25.00 14. Old U/S Pillar tap/bib tap/stop cock of any type Each 25.00 15. Old U/S Basin mixer of any type Each 50.00 16. Old U/S bottle trap/ health tube/ jet spray of any type Each 25.00 17. Old U/S wash hand basin including accessories Each Set 50.00 18. Old U/S cascade type water closet including accessories Each Set 100.00 19. Old U/S mild steel of any description (structural steel) Kg 20.00 20. Old U/S Expanded metal of any type Sqm 12.00 21. Old U/S Timber scantling Cum 10000.00 22. Old U/S hydraulic door closer Each 30.00 23. Old U/S hat and coat hook of any type/size Each 5.00 24. Old U/S Brass bracket of any type Each 5.00 25. Old U/S Brass hook of any type Each 5.00 26. Old U/S Stainless steel pipe of any type RM 5.00 27. Old U/S plywood/block board of any type Sqm 5.00 28. Old U/S marble slab of any type Sqm 100.00 29. Old U/S PGI or CGI Sheets (any gauge) Sqm 35.00 30. Old U/S MS Towere bolt of size 150mm long Each 4.00 31. Old U/S MS Tower bolt of size 200mm long Each 5.00 32. Old U/S MS Tower bolt of size 300mm long Each 6.00 33. Old U/S MS Tower bolt of size 650 mm long Each 7.00 34. Old U/S MS Sliding door bolt Each 6.00 35. Old U/S Aluminium tower bolt of size 150mm Each 5.00 36. Old U/S Aluminium bow handle of size 125mm Each 4.00 37. Old U/S point wiring with accessories with acesories like switch,socket,plate etc of any description Point 20.00 38. Old U/S sub-main wiring 4 Sqmm Rm 18.00 39. Old U/S sub-main wiring 6 Sqmm Rm 20.00 40. Old U/S sub-main wiring 10 Sqmm Rm 25.00 41. Old U/S light fittings of any type and wattage Each 20.00 42. Old U/S buzzer with indicator light any type Each Set 3.00 43. Old U/S MCB DB of any type Each 45.00

Contract Date: Nov 29, 2025 Contract Value : ₹ 5.00 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 9

Uttar Pradesh View Result →

34.

Water Resources and Irrigation #11342285 AOC

Contract Date: Jun 23, 2026 Contract Value : ₹ 2.52 Crore

Local Bodies No of Bidders 1

Kerala View Result →

35.

Railways #11340092 AOC

Supply Of heavy duty hydraulic cylinder 2h series , heavy duty hydraulic cylinder 2h series to size 5 bore x 2 rod dia x gross str oke 120, net stroke 108 stop tube 12, both ends cushioned, cap fixed clevis mount, style 9 to m/s parker model no: 5cbb2hcuvs19ac120 or exactly similar. note: (1). piston and gland seals shall be of m/s parker make only. (2). documentary evidence shall be furnished along with the supply for having procured seals & gland from m/s parker or their authorised dea lers. (3). firm should furnish inspection /test certificate along with the supply. (4). firm sho uld furnish warranty certificate for their product. [ warranty period: 12 months after the dat e of delivery ] ]

Contract Date: Jun 24, 2026 Contract Value : ₹ 1.81 Lakh

Government Departments No of Bidders 1

Karnataka View Result →

36.

Defence #11336364 AOC

Bids Are invited for Mt Spares Ram Hydraulic Ram Assy , Motor Assy Starting , Regulator Assy Fuel Pressure , Gear Tube Shift , Hydraulic Cylinder Hm 50 25 4 , Cover Assy 1.75 Inch Spline , Assy Cylinder Head Cover , Gasket Cylinder Head Cover , Bearing Assy Rear , Condensor Fan Assy , Inlet Valve , Exhaust Valve Total Quantity : 14

Contract Date: Ref. Documents Contract Value : ₹ 74,013

Statutory Bodies & Commissions/Committees No of Bidders 3

Telangana View Result →

37.

Power #11334917 AOC

Contract Date: Jun 23, 2026 Contract Value : ₹ 5.85 Lakh

Government Departments No of Bidders 3

West Bengal View Result →

38.

Coal and Mines #11334452 Price Bid

Tender for Repairing Of 02 Nos. Steel Tube Travel Motor Cover And Damaged Base And Cl And Provide And Fitting For Tata 2060 Hydraulic Shovel Machine At Adic Kusunda Area.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Jharkhand View Result →

39.

Public Administrative Department #11334347 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Kerala View Result →

40.

Agriculture #11333050 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Cooperative No of Bidders 3

Haryana View Result →

41.

Petroleum and Natural Gas #11326540 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 1

Tamil Nadu View Result →

42.

Educational and Research Institute #11326531 Technical Bid

Tender for Purchase Of Equipments For Mechanical Department , Purchase Of Equipments For Mechanical Department , Tail Stock Assembly ● Medium-Duty Tailstock Assembly For Dismantling & Assembly ● Quill Stroke: Minimum 75 Mm ● Taper: Mt-3 (Preferred Standard) ● Feed: Hand Wheel Operated ● Features: Set-Over Screws For Taper Turning ● Spindle Locking Arrangement ● Body: Cast Iron (Fg 260) ● Spindle: Hardened Steel , Working Model Of Fuel Supply System - Petrol Mpfi Type ● Petrol Multi Point Fuel Injection (Mpfi) System For Dismantling And Assembly Practice ● System Type: Non-Working / Cut-Section Model For Study Of Internal Construction ●Construction: Actual Automotive Components Or Equivalent Training Model Mounted On Frame ● Includes Throttle Body (Sectioned), Fuel Injectors, Fuel Rail, Intake Manifold ● Includes Fuel Pump, Fuel Tank (Dummy), Fuel Filter, Pressure Regulator ● Includes Ignition System Components: Ignition Coil, Spark Plug, Distributor (If Applicable) ● Ecu Module (Dummy/Display Type) With Wiring Layout Representation ● All Components Cut-Open, Painted, And Clearly Labelled ● Provision For Manual Demonstration Of Flow Path And Component Interaction ● Mounted On Rigid Ms Powder-Coated Frame ● Designed For Repeated Dismantling, Assembly, And Component Identification , Hydraulic Cylinder Bore Diameter: 50 Mm ● Stroke Length: 250 Mm ● Working Pressure: 160 Bar ● Cylinder Tube: Honed Steel ● Piston Rod: Hard Chrome Plated ● Seals: Standard Industrial Seals ● End Caps: Steel Supply: ● Mounted On Training Base ● Suitable For Dismantling And Inspection , Hydraulic Operated Directional Control Valves (Dcv) ● Type: Manual Spool Type Dc Valve ● Configuration: 4/2 Way ● Size: Ng06 (Cetop 3) ● Rated Pressure: 210 Bar ● Flow Capacity: 20-40 Lpm ● Body: Hardened Steel / Cast Steel ● Spool: Ground And Hardened ● Ports: Clearly Marked (P, A, B, T) Supply: ● Mounted On Training Plate ● Suitable For Dismantling And Study , Bearing With Shaft Assembly ● Type: Dismantling And Assembly Teaching Unit ● Shaft Diameter: 30 Mm ● Shaft Material: En8 Steel ● Bearings: Deep Groove Ball Bearing (6205 / 6206) ● Housing: Cast Iron ● Locking Arrangement: ● Circlips ● End Covers Mounting: ● Bench-Mounted / Frame Mounted Unit , Coupling Unit Using Driving And Driven Shafts Using Plummer Block Bearing Unit ● The Plummer Block Housing Material: Cast Iron (Grade Fg 200 Or Equivalent). Type: Sng Or Snl Series (Split-Type Housing). Sealing: Felt Seals Or V-Ring Seals (To Demonstrate Lubrication Retention). Lubrication: Provided With A Grease Nipple At The Top Center For Manual Lubrication Practice. ● The Bearing Type: Self-Aligning Ball Bearing (1200 Series) Or Spherical Roller Bearing (22200 Series). Bore Diameter: Standard 25Mm Or 30 Mm. ● Shafting And Coupling Shaft Material: Ground Carbon Steel (En8 Or En9) For High Surface Finish. ● Coupling Type: Flexible Coupling: To Demonstrate The Bearings Ability To Handle Slight Misalignment. ● Rigid Flange Coupling: To Demonstrate Traditional Direct Connection. ● Driving/Driven Setup: One Shaft Connected To A Small Electric Motor (Driving) And The Other To A Brake Drum Or Load (Driven). , 3D Printing Machine ● Build Volume(Wxdxh) 256 X 256 X 256 Mm³ ● Shell Enclosed (Plastic & Glass) Hot End All-Metal ● Nozzle 0.4 Mm Stainless Steel Included ● Max Hot End Temperature 300 ℃ ● Nozzle Diameter 0.4 Mm (Included) 0.2 Mm, 0.6 Mm, 0.8 Mm ● Build Plate Compatibility Textured Pei Plate, Cool Plate, Engineering Plate, High Temperature Plate ● Max Build Plate Temperature 100℃ ● Max Speed Of Tool Head 500 Mm/S ● Max Acceleration Of Tool Head 20 M/S² ● Supported Filament Pla, Petg, Tpu, Pva, Pet, Abs, Asa ● Chamber Monitoring Camera Low ● Rate Camera 1280 X 720/0.5Fps ● Time Lapse Supported ● Filament Run Out Sensor :Yes ● Control Board Fan Closed Loop Control ● Auxiliary Part Cooling Fan Closed Loop Control ● Air Filter Activated Carbon Filter

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Tamil Nadu View Result →

43.

Agriculture #11326299 Technical Bid

Tender for Job Work & Material Supply Of Both Boilers. Supply And Job Work For Our 2 Nos. Boilers Having Capacity: - 25 Tph Each, Working Pressure -21 Kg /Cm2 (G). Design Pressure: -24Kg /Cm2 (G), Hydraulic Test Pressure: - 36Kg/Cm2 (G)Super-Heated Steam Temp-340ᵒc ±15ᵒc.Make Of Boiler: - Wil Registration No. -Ha-276 & Ha-277. , Supply Of Fabricated BoilerS Side Wall Tube For Our 2 Nos. Boilers As Per Site Situation With Following Specification: - Tube O.D - 63.5 Mm, Tube Thickness - 4.06 Mm Each Tube Length - Approx. 10.200 Mtr, Total No. Of Tubes = 80 X 2 Boilers Tube Material = Bs 3059 Gr-320 Part-1 (Erw) Make- Ti/ Tata/ Msl , Job Work Of Dismantling And Erection Of Above Side Wall Tubes For Our 2 Nos. Boilers As Per Site Situation With Following Specification: -. Tube O.D - 63.5 Mm, Tube Thickness - 4.06 Mm Each Tube Length - Approx. 10.200 Mtr, Total No. Of Tubes = 80 X 2 Boilers Tube Material = Bs 3059 Gr-320 Part-1 (Erw) Make- Ti/ Tata/ Msl , Supply, Dismantling, Fabrication And Erection Of Boiler Side Wall Nipples/Stubs As Per Site Situation With Following Specification: - Stubs/Nipple O.D - 63.5 Mm, Thickness - 4.47 Mm (7 Swg) Nipple Length =200 Mm(Approx), Total Nipple Of Both Boilers= 272 X 2 Boilers, Material Of Nipple/ Stubs =Bs 3059 Gr-320 Part-1 (Erw) , Supply And Job Work Of All Refractory Civil Work Of Above Re-Tubing And Baffles Work Etc. I.E. With Fire Cement, Castable Refractory, Fire Clay, Fire Bricks And Fire Blocks Etc. For Both Boilers As Per Drawing No. Hb/Pp/148A/Or As Per Site Situation.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Cooperative No of Bidders 4

Haryana View Result →

44.

Petroleum and Natural Gas #11322090 AOC

Bids Are invited for Custom Bid For Services - Construction Of Compressor Shed With Associated Civil And Electrical Works For Operation Of Two Nos Screw Type Air Compressor At Ihb Mithirohar Pumping Station In Gujarat - Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas Including Dressing Of Sides And Ramming Of Bottoms Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil, All Works Up To Any Lead And Lift, As Directed By The Engineer-In Charge : In All Kinds Of Soil. , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of The Engineer-In-Charge. [Notes: (1) Dismantling Shall Be Allowed During Day Shift Only & Prior Permission For The Same Shall Be Obtained. (2) Providing Of Necessary Covers/ Barricades Around The Work Area Shall Be Done Prior To Dismantling Operations.]Nominal Concrete 1:4:8 Or Leaner Mix. , Supplying & Fixing Welded Wire Mesh Door Made From Steel Wire Fabric Of Rectangular Mesh 75 X 25 Mm Size, Weight Not Less Than 7.75 Kg/Sqm Fixed On Angle Iron Frame By Welding, Fixing Of Holdfast, Hinges, Door Handles, Tower Bolts, Aldrops (2 Nos.), Wheels, Painting With Two Coats Of Synthetic Enamel Paint Of Over A Coat Of Red Oxide Zinc Chrome Primer, Excluding Frame Etc. Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications And Directions Of The Engineer-In-Charge. (Note: Angle Iron Frame Shall Be Paid Separately). , Providing And Laying In Position Cement Concrete Of Specified Grade Including The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cementconcrete For Reinforced Cement Concrete Work;Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources,Portland Pozzolana /Ordinary Portland/Portland Slag Cement,Admixtures In Recommended Proportions As Per Is:9103 To Accelerate /Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength;Including Pumping Of Concrete To Site Of Laying, The Cost Of Centering, Shuttering,Finishing, Curing,Carriage For All Leads,As Per Direction Of The Engineer-In-Charge,For The Following Grades Of Concrete.:Note: 1. Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. Incase The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bearthe Cost Of Extracement. 2.Payment For Reinforcement Shall Be Made As Per Relevant Item Of Sor. ;All Works Upto Plinth Level ; Concrete Of M30 Grade With Minimum Cement Content Of 350 Kg /Cum , Supplying, Cutting,Bending, Hoisting,Placing In Position Withproper Pre-Castconcrete Block Coverand Binding By Pvc Coated (Extrusion Process) 18 Guage Swgwire, High Yield Strengthdeformed Bars Of Grade Fe500 Conforming To Is:1786 With Protectivefusion Epoxy Coating Asper Is:13620 For All R.C.C Works Including All Necessary Handling At All Heights And Depths Complete In All Respects As Per Specifications And Directions Of The Engineer-In-Charge. , Brick Work With Common Burnt Clay F.P.S. (Non Modular)Bricks Of Class Designation 7.5 Infoundation And Plinth In : Cement Mortar 1:6 (1Cement : 6 Coarse Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brickwall Of Mix : 1:6 (1 Cement : 6 Fine Sand) , 6 Mm Cement Plaster Of Mix 1:3 (1 Cement : 3 Fine Sand) , Supplying, Fabricating, Erecting, Placing And Fixing In Position M.S. Structural Works Using Rolled/ Built Up Sections For Truss, Claddings, Bracings, Purlins, Supporting Frames Made Of Joists, Tubes, Pipes, Channels, Angles, Plates, Flats, Bars Etc. Including Cutting To Required Size Welding Of Joints, Fixing Anchor Plates, Including Bolts, Theading, Nuts, Washers, Sleeves Etc. Including Preparation Of Detailed Fabrication Drawings & Submission To The Engineer-In-Charge For Approval Before Start Of Fabrication, Supplying & Applying Painting With Two Coats Of Epoxy Paint Epilux 155 High Build Enamel Over A Coat Of Epilux 610 Primer Of M/S Berger Or Any Other Approved Equivalent Make As Per Manufacturers Recommendation, Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications And Directions Of The Engineer-In-Charge. (Excluding The Cost Of Concrete Work). , Providing And Laying 52 Mm Thick Cement Concrete Flooring With Metallic Hardner, Under Layer Of 37 Mm Thick Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) And Top Layer Of 15 Mm Thick Metallic Concrete Hardner Consis Ting Of Mix 1:2 (1 Cement : 2 Stone Aggregate 6 Mm Nominal Size) By Volume With Which Metallic Hardening Compound Such As Ironite No . 1 Of Ironite Co. Of India Ltd. Or Aproved Equivalent Mixed In The Ratio 4:1 (4 Parts Of Cement : 1 Part Of Metallic Floor Hardenin G Compound Of Approval Quality) By Weight, Inclusive Of Cost Of Finishing, Labour, Material, Equipment, Etc. As Per Specifications A Nd Directions Of The Engineer-In-Charge. , Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) : 6 Graded Stone Aggregate 40 Mm Nominal Size) , Supplying And Layingflat Brick Soling Infoundation Trench, Infloors, Garages, Sumps,Etc., With Bricks Of Classdesignation 50 Laid Toproper Slope, Level Andgrade Etc. Filling Of Thejoints With Sand Etc.Complete In All Respectsinclusive Of Cost Of Alllabour, Materials, Tools,Tackles Etc. As Perdrawings, Specificationsand Directions Of Theengineer-

Contract Date: Ref. Documents Contract Value : ₹ 24.99 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 5

Gujarat View Result →

45.

Defence #11321698 AOC

Bids Are invited for Mta Stores Tubelight Led With Complete Fitting 18 Oblique 20 Watt , Switch Piano Type 5 Oblique 6 Conform To Is 1293 , Switch Piano Type 15 Oblique 16 Conform To Is 1293 , Pvc Casing Capping 25 Mm Wide Not Less Than 2 Mm Thick , Pvc Switch Board 10 Inch X 12 Inch Conform To Is 14772 , Pvc Switch Board 8 Ich X 10 Inch Conform To Is 14772 , Pvc Switch Board 7 Inch X 4 Inch Conform , Switch Socket Combination 5 Oblique 3 Pin With Gang Box , Switch Socket Combination 5 Oblique 3 Pin Without Gang Box , Switch Socket Combination 15 Oblique 3 Pin With Gang Box , Switch Socket Combination 15 Oblique 3 Pin Without Gang Box , Socket 5 Oblique 6 5 Pin , Socket 15 Oblique 16 5 Pin , Mcb 16 A Sp 240 Volt , Mcb 32 A Sp , Mcb 32 A Dp , Insulation Tape 1 Point 8 Cm Wide 7 Point 5 Mtr Long , Led Bulb 5 W , Led Bulb 9 W , Led Bulb 15 W , Led Bulb 18 W , Step Fan Regulator , Pendent Holder , Angle Holder , Capacitor 2 Point 5 Mfd For Ceiling Fans , Bed Switch 5 Oblique 6 , 3 Pin Plug Top 5 , 3 Pin Plug Top 15 , Water Proofing Compound , Vitrified Coloured Tile Of Size 600Mm X 600Mm X 10Mm Thick , Non Skid Ceramic Tile Of Size 300Mm X 600Mm X 7Mm Thick , White Cement , Self Tapping Screw 3 Inch , Self Tapping Screw 4 Inch , Pbs Roll 0 Point 9 Mm Wide 20 Mtr Long Isi Marked , Paint Red Oxide , Thinner 5 Ltrs Pack As Per Approved S Le , Paint Brush 2 Inch , Paint Brush 3 Inch , Paint Brush 4 Inch , Synthatic Enamel Paint Og , Synthatic Enamel Paint White , Synthatic Enamel Paint Black , Synthatic Enamel Paint Red , Synthatic Enamel Paint Brown , Distemper White , Wall Putty Pdr Pkg Size 1 Kgs , Plywood 8 Feet X 4 Feet X 12 Mm , Plywood 8 Feet X 4 Feet X 6 Mm , Plywood 6 Feet X 3 Feet X 12 Mm , Fevicol Sr , Head Rest Plywood 2Feet X 1 Feet X 19 Mm For Sleeping Bunk , Acrylic Sheet 8Feet X 4 Feet Of 4 Mm Thick , Aluminium Alloy Anodised Sliding Door Bolt With Hasp And Stapleor Cast Aluminium Alloy Size 250 Mm , Aluminium Anodised Barrel Tower Bolt Of Extruded Section 150 Mm Size , Aluminium Alloy Handles Fabricated Type Anodised 150 Mm , Hydraulic Door Closer Isi Marked , Pvc Soap Tray Isi Marked Superior Quality , Nails Various Sizes , Glass Putty Superior Quality , Binding Wire 20 Guage , Draperty Curtain Rod Aluminium Anodised 5 Feet Long 20 Mm Dia Superior Quality , Bracket For Curtain Rod Best Quality , Europeon Type Water Closet Colored Ewc Of Size 500 X 345 X 390 Mm With Jet And Seat Cover , Pvc Flushing Cistern Of 10 Ltr Capacity With Complete Fitting , Ceramic Indian Water Closet Iwc Of Size 580 Mm Fitted Foot Rest With P Trap , Seat Cover For Ewc , Urinal Pot With Waste Pipe Including Spreader For Pot , Wash Hand Basin With Cp Waste Coupling And Waste Pipe Along With Ms Bracket Suitable For Fixing Of Whb , Pvc Wste Pipe For Wash Hand Basin As Per Approved S Le , Cp Coupling With Waste Pipe For Wash Basin , Health Faucket Abs Body With 1 Mtr Long Easy Flex Tube In Chrome Finish And Wall Hook , M Seal Superior Quality 100 Gms Pkt , Teflon Tape 10 Mm Roll Superior Quality , Cp Toilet Paper Holder Superior Quality , Looking Mirror Of Size 450 X 600 Mm With Plastic Frame Superior Quality , Cp Jet Spray , Plastic Water Tank For Storage Of Drinking Water Manufactured Provided In 500 Ltrs Water Capacity Material , Plastic Water Tank For Storage Of Drinking Water Amnufactured Provded In 1000 Ltrs Water Capacity Material , Silicon Gel Tube 250 Ml , Hdpe Sand Bag Superior Quality , Plastic Tarpaulin Hdpe 30 Feet X 30 Feet Green , Gypsum Board 12Mm Thick In Ceiling Fixed With Screws As Per Amnufacturer Instruciton , Anodised Aluminium Snap Grid Frame Work For False Ceiling As Specified Total Quantity : 6640

Contract Date: Ref. Documents Contract Value : ₹ 20.00 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 5

Assam View Result →

46.

Heavy Industries and Public Enterprises #11321092 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Assam View Result →

47.

Tourism #11320518 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Uttar Pradesh View Result →

48.

Railways #11318949 AOC

Supply Of heavy-duty hydraulic pipe cl assembly , heavy-duty hydraulic pipe clamp assembly for securely fastening pipes or tubes in industrial systems, featuring a sturdy clamp body with metal top and base plates fastened by two hex bolts, clamp b odies are commonly made from durable materials like polypropylene, aluminum, or polyamide. hydraulic pipe diameter: 6mm, 8mm, 10mm, 12mm, 15mm, 16mm, 20mm, 22mm, 26mm, 28mm, 30mm & 42mm. one et consists of one no of each size i.e. 12 nos. [ warranty period: 12 months after the date of deliv ery ] ]

Contract Date: Jun 20, 2026 Contract Value : ₹ 52,917

Government Departments No of Bidders 1

Bihar View Result →

49.

Chemicals and Fertilizers #11318155 AOC

Contract Date: Ref. Documents Contract Value : ₹ 22.38 Lakh

Boards / Undertakings / PSU No of Bidders 3

Maharashtra View Result →

50.

Environment and Forests #11317793 AOC

Bids Are Invited Forled Flood Light 150Watt , 06Mm W.P Aluminum Wire 90 Mtr Roll , Switch 6 Amp Non Monduler , Socket 6 Amp Non Monduler , Switch 16 Amp Non Monduler , Socket 16 Amp Non Monduler , Combind Box 6 Amp , Combind Box 16 Amp , Dp Mcb 40 Amp , 63 Amp Isolator 4 Pole , Pvc Wire 1 Sq Mm , Pvc Wire 1.5 Sq Mm , Pvc Wire 2.5 Sq Mm , Flexibal Copper Wire 40 Or 76 , Bed Switch , Pandent Holder , Batten Holder , Pvc Gang Box 6 Way , Pvc Gang Box 4 Way , Flexibal Pipe 25Mm , Pvc Condute Pipe , Led Street Light 70 Watt , Led Tube Light 18 Watt , Led Charging Blub 15Watt , Fan Capicitor 2.5 Mfd , Pvc Tape For Electric Work , Pvc Float Valve Half Inch , Ptmt Bib Cock Half Inch , Ptmt Angle Cock Half Inch , Pvc Connection 600 Cm Long , Wast Pipe 32 Mm 900 Mm Long , Taplon Tap , Gi Pipe Half Inch , Gi Socket Half Inch , Gi Union Half Inch , Gi Reducer 1.2 X 3.4 Inch , Pvc Pipe 4 Inch , Pvc Elbow 4 Inch , Pvc Socket 4 Inch , C.P Jet Spray , Cement , Coares Sand , Tmt Steel Iron , Terracotta Colure , Acrylic Paint Exterior For Outdoor Wall , Paint Brush 4 Inch , Paint Brush 3 Inch , Paint Roller 9 Inch , Nails Mixed , Screw Worden Half Inch , Gypsum Screw Mixed 1 Inch , 1.5 Inch, 1000 Pcs Per Pack , Fevicol Glue Or Adhesive Marein , Hinge 5 Inch S.S , Hinge 3 Inch , Door Stopper , Door Bottom Seal Strip 4Feet Long , Plane Glass 6Mm 4 X4 Feet , Glass Putty , Wall Putty 25 Kg Bag , Samosam 25 Kg Bag , Iron Bib Taps , Hydraulic Door Closer , Pvc Gitty , Tower Bolt 150 Mm Long 12Mm , Handle Ss 125Mm , Tower Bolt 200Mm Long 12 Mm , P.V.C Pipe 3 Inch , P.V.C Elbow 3 Inch , C.P.V.C Pipe 1 Inch , C.P.V.C Socket 1 Inch , C.P.V.C Tee 20Mm , C.P.V.C Brass Socket 20X15Mm , C.P.V.C Brass Elbow 20X15Mm , C.P.V.C Pipe 25Mm , C.P.V.C Socket 25Mm , C.P.V.C Tee 25X20Mm , C.P.V.C Elbow 25Mm , C.P.V.C Brsss Fta 20X15Mm , C.P.V.C Brass Mta 20X15Mm , C.P Brass Bib Cock Spindle Half Disc 15Mm , C.P Mixxer Cock For Bathroom , C.P Brass Long Boday Bib Cock , C.P Brass Pilllar Cock , P.V.C West Coupring 32Mm , One Pice Cestren Kit 10 Inch , S.S Nut Conection Pipe 18 Inch , P.V.C Water Tank 500Lter , Water Water Sintex Cover , Stainer For Paint Colune As Per Requirment 200 Ml Quantity : 8023

Contract Date: Ref. Documents Contract Value : ₹ 2.83 Lakh

Government Departments No of Bidders 9

Uttarakhand View Result →

TenderDetail

Loading tenders