View Bid Results For Hydraulic Motors Tenders

We found 6558 Bid Results related to hydraulic motors tenders. You can find Contractor details who won hydraulic motors tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–50 of 6558 tenders matching your filters

Housing Urban and Rular Development #11483681 AOC

Tender for Excavation For Roadwork In Soil With Hydraulic Excavator Including Cutting And Loading In Tippers, Trimming Bottom And Side Slopes, In Accordance With Requirements Of Lines, Grades And Cross Sections, And Transporting To The Embankment Location Within All Lifts And Lead Upto 1000M As Per Mort&H Clause No-3.06-301 , Construction Of Granular Sub-Base By Providing Close Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Vibratory Roller To Achieve The Desired Density, Complete As Per Clause 401 , Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers With Paver In Sub- Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achieve The Desired Density. , Providing And Applying Primer Coat With Ss-2 Grade Bitumen Emulsion On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg/Sqm Using Mechanical Means. , Providing And Laying Dense Graded Bituminous Macadam With Higher Capacity Batch Type Hmp Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 Per Cent By Weight Of Total Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 505 Complete In All Respects. , Providing And Laying Tack Coat With Bitumen Vg-10 Using Pressure Distributor At The Rate Of 0.30 Kg. (As Per Uppwd) Per Sqm On The Prepared Primed Surface Cleaned With Mechanical Broom , Providing And Laying Bituminous Concrete With 100-120 Tph Batch Type Hot Mix Pla

Contract Date: Mar 17, 2026 Contract Value : ₹ 9.38 Crore

Government Departments No of Bidders 4

Uttar Pradesh View Result →

Power #11482346 AOC

Procurement Of 03 Nos. Of 31.5 Mva, 132/34.5Kv Power Transformers , Main Items: , 31.5 Mva, 132Kv / 34.5Kv, 50Hz, Ynd1, Star (Earthed Neutral) / Delta, Core Type, 3 Phase, Outdoor Type, Oil Immersed, Onan/ Onaf Cooled Switchyard Transformer Complete With Main Tank, Tank Mounted Cooler Bank, On Load Tap Changer (Hv Side) Suitable For Voltage Variation Of +/- 10% Variation, Cc Cubicle, Digital Rtcc Panel Along With All Fittings & Accessories As Per Requirement Of Technical Specification (Except Transformer Oil, N2 Fpes) , Transformer Oil For First Filling Plus 10% Extra Quantity. , Complete Set Of Equipment For Fire Prevention & Extinguishing System By Nitrogen (N2) Injection Method As Per Technical Specification Including Supply Of All Control Units & Accessories, Pipe, Connectors, Required Control Cables, Ac / Dc Converters Etc. All Complete Along With Supply Of Spare N2 Cylinder For Above Transformer. , Condition Controlled Regenerative Maintenance Free Silica Gel Breather For Main Conservator Complete With All Accessories , Condition Controlled Regenerative Maintenance Free Silica Gel Breather For Oltc Conservator Complete With All Accessories , Type Test Charges As Per Spec.: , Temperature Rise Test On One Unit , Impulse Test On One Unit , Mandatory Spares (For Above Transformer): , Hv Bushing As Per Spec. With Metal Parts & Gaskets , Lv Bushing As Per Spec. With Metal Parts & Gaskets , Hv Neutral Bushing As Per Spec. With Metal Part & Gaskets , Buchholz Relay (With Alarm & Trip Contacts) For Main Tank , Oil Surge Relay (With Alarm / Trip Contacts) For Oltc , Magnetic Oil Level Gauge (With Alarm / Trip Contact) For Main Conservator , Magnetic Oil Level Gauge (With Alarm / Trip Contact) For Oltc Conservator. , Current Transformer Of Hv Wti. , Current Transformer Of Lv Wti. , Current Transformer Of Hv-N , Local Oti Complete With Alarm, Trip Contacts & Sensing Device, Etc. , Local Wti Complete With Alarm, Trip Contacts & Sensing Device, Etc. , Remote Oti Complete With Alarm, Trip Contact & Sensing Device Etc. , Remote Wti Complete With Alarm, Trip Contact & Sensing Device Etc. , Pressure Relief Device , Remote Tap Position Indicator , Cooling Fan With Motor , Terminal Connectors (1No.T For Each Type Of Rating) , Set Of Gaskets Required For Complete Erection Of One Transformer Including Bushings, Radiators, Cooling Pipes Etc. , Transformer Oil Sample Collection Bottle (Steel Bottle Fitted With Inlet & Outlet Valves, Etc.) - 1000 Ml Capacity , Hydraulic Jacks Suitable For Above Transformer (1 Set Consisting Of 4 Nos.) , Unloading Charge Per Unit At Site (1 Unit Means Complete Set Of Transformer With All Accessories, Spares, Tools & Tackles Etc.) , Supervision Charges For Deputation Of Engineer / Technician To Supervise Erection & Commissioning Work. (Optional) – [N.B. General Terms & Conditions For Supervision Of Erection & Commissioning Job Shall Be Furnished] Engineer / Technician Per Day

Contract Date: Jul 01, 2026 Contract Value : ₹ 10.93 Crore

Boards / Undertakings / PSU No of Bidders 2

West Bengal View Result →

Public Administrative Department #11481794 AOC

Tender For Annual Plan-Tholur Gp 2025-26 Vaysyan Kavu Ambalam Road Ward 12-P.No: 126/26-General Civil Work - RETTARING 2 75.5.5.A.1pb:Modified Penetration Macadam 50 mm thick using Bitumen S-65 - Packed Bitumen RatesConstruction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. 3 75.5.2.1pb:Tack Coat - With Packed Bitumen RatesProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. 4 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen RatesProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509By Manual MeansType A(II) Bitumen (S-65) 5 4.11.2:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408.
(ii) Using Gravel mix soil. 6 4.9:Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.By Mechanical Means with 1 km lead 7 75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen RatesProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 8 75.5.2.3pb:Tack Coat - With Packed Bitumen RatesProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. 9 IRISH DRAIN 10 3.5.1:Excavation in Cutting in Soil by manual means with lead upto 50 mExcavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 11 OD469989/2024-2025:Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade (Ref DSR 51.2.3. ) with MR 12 75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

Contract Date: Jul 02, 2026 Contract Value : ₹ 2.83 Lakh

Government Departments No of Bidders 2

Kerala View Result →

Public Administrative Department #11481750 AOC

Tender For Annual Plan-Moodadi G P 2025-26 Project No.132 -Arafapalliyil Poovankandi Kshethram Road Ward 1-General Civil Work - RETARRING 2 3.2:Preparation of Foundation for EmbankmentScarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical MeansScarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4. 3 OD120324/2025-2026:USING DEPARTMENTAL MATERIAL-Granular Sub-base with Well Graded Material (Table 400.1)
(A) By Mix in Place Method
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
(i) For Grading I Material 4 4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1)(A) By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(i) For Grading I Material 5 4.9:Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.By Mechanical Means with 1 km lead 6 75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen RatesProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 7 75.5.2.3pb:Tack Coat - With Packed Bitumen RatesProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. 8 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen RatesProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509By Manual MeansType A(II) Bitumen (S-65) 9 4.11.2:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. (ii) Using Gravel mix soil. 10 11.4.1.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203I. P.C.C grade M 10(i) Nominal mix 1:3:6

Contract Date: Jul 03, 2026 Contract Value : ₹ 3.37 Lakh

Government Departments No of Bidders 1

Kerala View Result →

Public Administrative Department #11474686 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Uttar Pradesh View Result →

Defence #11473120 AOC

Bids Are invited for Armature For Wood Cutting Machine , Carbon Brush For Wooden Cutting Machine , Armature With Bearing For Hand Grinder Machine , Carbon Brush For Hand Grinding Machine , Vice For Drilling Sensitive Piller , Copper Condenser For Window Ac , Blower For Window Ac , Bobbin Case For Sewing Machine , Needle Organ For Sewing Machine , Belt For Sewing Machine , Electric Motor For Outer Unit For Split Ac Hp One By Eight Rpm One Hundred Thirty , Hydraulic Seal For Hydraulic Jack Trolley Total Quantity : 19

Contract Date: Ref. Documents Contract Value : ₹ 38,630

Statutory Bodies & Commissions/Committees No of Bidders 5

Uttar Pradesh View Result →

Home Affairs #11466542 AOC

Contract Date: Jul 02, 2026 Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

West Bengal View Result →

Railways #11461774 AOC

Supply Of hydraulic motor , hydraulic motor to model no.aajaddbooooboo of m/s. vickers or model no. f12030 of m/s. parker for special cranes. ]

Contract Date: Jul 03, 2026 Contract Value : ₹ 3.77 Lakh

Government Departments No of Bidders 1

Karnataka View Result →

Coal and Mines #11461546 AOC

Comprehensive annual maintenance contract For Instant Ash Measuring Furnace For 2 Years Period At Various Ocps, Chps & Quality Control Labs Of Sccl-Reg--1. M.S. Bolts & nuts 2. Rivets, washers & screws 3. Dog nails 4. Fish plates, Nuts & bolts for fish plates 5. Belt jointing pins 6. Cable hooks and signal hooks 7. Belt conveyor rollers 8. Belt sections 9. Resin Capsules 10. Cement Capsules 11. GI canisters 12. Blasting Gallery – Spacers 13. Radiator repairs 14. Repairs and rewinding of motors of AC & DC 15. Repairs / rewinding of Transformers (Welding / lighting/ power) 16. GI wire 17. Wire Mesh for long-wall salvage 18. Manufacturing of supply of Electrical coils for AC motors up to 6.6 KV grade and Transformer coils up to 33 KV grade 19. Repairs of rotors for electric motor 20. Lighting cable 21. Steel chock manufacturing 22. House wiring 23. All types of fan repairs 24. Shovel bucket welding 25. Repairs of pumps 26. Couplings manufacturing 27. Special steel and alloy castings (Tooth points, track pads, Mn steel casting) 28. Manufacturing of fly ash bricks. (Not to be manufactured at stores site. It shall be at their own site). 29. Manufacturing of pump components (spares). 30. Transformer oil filtration 31. Reconditioning of drill bits and drill rods 32. Vulcanizing the old Trailing cables of drill machines, SDLs, LHDs, etc. (work should be carried out at the respective mine premises). 33. Manufacturing of earth clams, G.I flats, G.I bolts and nuts. 34. Manufacturing of earth pit components and erection. 35. Crimping of hydraulic hoses. 36. Repairs to hydraulic pumps, motors, control valves and other related components 37. Refurbishing of LT & HT switches with OEM spares including testing. 38. Manufacturing / repairs of slip rings & D-contacts. 39. Furniture repairs i.e., cane chairs, table, almirahs, etc. 40. Repairs to wet grinders, water purifiers, and water coolers 41. Manufacturing of coupling bolts of all sizes 42. Fabrication of OHT line components like cross arms, clamps, stay wires, cross brassings, base plates etc. 43. Manufacturing of haulage rope drum rollers. 44. All sizes of Ventilation doors

Contract Date: Ref. Documents Contract Value : ₹ 23.52 Lakh

Government Departments No of Bidders 1

Telangana View Result →

10.

Public Administrative Department #11459480 Technical Bid

Tender for Supply Of Construction Material & Equipments For In Gram Panchayat 41Gb , Material , Cement Ppc , Lqsn Lhessav , Gravel - Local , Stone 40Mm Grit(Broken By Crusher)(Cut Voids 1/11) , Stone 20Mm Grit(Broken By Crusher) , Stone 12/10/6Mm Grit(Broken By Crusher) , Bzav Dh Fxv~Vh , Gravel(Cut Voids 1/6) ,Ent First Class 22.5X11x7.5Cm (I St Class) ,Ent F}Rh; Category/Second Class , Fcuk Polished Jq Kota Stone Up To 900 Sq Cm , Fcuk Polished Jq Kota Stone Up To 901 To 2300 Sq Cm , Polished Kota Stone(One Side Polished) Up To 900 Sq Cm , Polished Kota Stone(One Side Polished) Up To 901 To 2300 Sq Cm , Ekjcy Irfkj ¼Edjkuk Vamxk 20 Eheh Eksvk½ 900 Oxz Lseh Rd , Precast Tiles/Blocks ( Mosaic Size- 40Mm Thick ) , Mosaic Size 40 Mm Thick , Vitfied Size- 60X60 Cm , Cement Interlocking Block M-30Grade, 60Mm Thick, For Road Work (Manufactured From Fully Computrised Automatic Stationary Hydrulic Vibropressed Machine And Batching Plant Of Class A As Per Bs 6717:2001) , Cement Interlocking Block M-30Grade, 80Mm Thick, For Road Work (Manufactured From Fully Computrised Automatic Stationary Hydrulic Vibropressed Machine And Batching Plant Of Class A As Per Bs 6717:2001) , Factory Made Doors (30 Mm Thick, Solid Core Single Leaf) , Iron (Tor Steel Fe 415/500 For Reinforcement) , Iron Girders, Cornice Iron/Square Rebar/Leaf/Angle Iron, Dkavsnkj Yksgs Dk Rkj (Size 12 Guage Wire And 12 Guage Starct/12 Guage Wire And 14 Guage Strad/14 Guage), Iron Mesh (24 Gauge, 14 Mesh), Cement Concrete Mesh Akash Patal 40 Mm Thick, Enamel Paint, Distemper (Water Bound), Pwuk&Iwrkbz Gsrw ¼Vkjlh@Dyh½ , Izkbej ¼Ydmh@Yksgs Ds Fy,½ , Corrugated Sheet G.I.Sheet 22 Gauge(0.80 M.M.) , Corrugated Asbestos Cement Sheet 6Mm(2.5/2.75X1m) , Pipe (Pvc) 90 Mm. Diameter Pe 80 Pn 06 (Including Ring), Pipe (Pvc) 110 Mm. Diameter Pe 80 Pn06 (Including Ring) , Sanitary- Indian Wc , European Wc , Foot Rest Isjnku , Phuh Fev~Vh Gksbnkj Ew=Nkuh@;Wjhuy 430*350*300Mm E; Difyu] Czsdsv] O Ihohlh Oslv Ikbzi , Gkfk /Kksou Ik=@Okwk Csflku 430*350*300Mm E; Difyu] Czsdsv] O Ihohlh Oslv Ikbzi , Vkj-Lh-Lh- ,Uih 3 G;We Ikbzi E; Dksyj ¼450 Eheh O;Kl½ , Equipments , Diesel Road Roller 8 To 10 Ton , Tractor Trolley , Tractor Water Tanker Capacity 4000 Liter Water , Cement Concrete Mixer 5-7 Cubic Feet , Ifeiax Lsv 15 ,P0ih0 , Niddle/Plate Vibrator With Operator , Grinding Machine With Operator (Big, Motor Driven) , Hydraulic Excavator/Jcb (Buck Capacity 0.4Cum) , Kvfjax Ydmh Ds Quvs Dh]E; Cyyh O Vu; Lkexzh E; Vhih] Lbzv Ij Yxkuk] Fu/Kkzfjr Vof/K Ds Ckn Gvkuk , Kvfjax Iykbz Dh] E; Cyyh O Vu; Lkexzh E; Vhih] Lbzv Ij Yxkuk] Fu/Kkzfjr Vof/K Ds Ckn Gvkuk , Kvfjax Yksgs Dh Iysv Dh] E; Cyyh O Vu; Lkexzh E; Vhih] Lbzv Ij Yxkuk] Fu/Kkzfjr Vof/K Ds Ckn Gvkuk

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 1

Rajasthan View Result →

11.

Public Administrative Department #11458204 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 4

Maharashtra View Result →

12.

Defence #11453365 AOC

Contract Date: Ref. Documents Contract Value : ₹ 68,900

Statutory Bodies & Commissions/Committees No of Bidders 3

Rajasthan View Result →

13.

Defence #11453263 AOC

Bids Are invited for Dak Box Side Bullet , Canvas Tool Bag Size 12Inchx14inch Bullet , Cold Patch With Tube , Cold Patch Tube Less Kit With Puncher , Cutting Plier 8 Inches Insulated , Dah With Handle , Cold Flat Chisel 6 Inch , File Flat Bastard With Handle 10Inch , File Flat Bastard With Handle 12Inch , First Aid Box Steel , Electric Tyre Inflator Air Pump For Light Vehicles , Fuel Funnel , Grease Gun Hand Operated , Hammer Ball Pin With Handle 2 Lbs , Inspection L With 05 Mtr Wire , Mechanical Jack Heavy Duty 10 Ton With Rod , Pad Lock With Duplicate Key , Pick Axe 4.5 Lbs , Plier Adjustable 8 Inch , Screw Driver , Screw Driver 6Inch , Screw Driver Phillips Star Type Head 6 Inch , Screw Driver Phillips Type 6Inch , Shovel Belcha , Spanner Adjustable 8Inch , Spanner De 8 Pic 8X9 To 21X23 , Spanner De 06 Pic Bullet , Spanner De 06 Pic 8X9 To 18X19 , Tire Pressure Gauge , Tool Box Steel , Towing Rope 10 Feet Long , Tyre Inflating Hose Air Line 1212 Truck , Tyre Lever , Valve Die , Car Washer Plunger High Pressure Pump With Motor Heavy Duty With All Accessories With 20 Meter Pipe , Gear Box Lifting Jack Hydraulic Long , Spray Gun , Hand Drilling Machine With Bit Set , Hydraulic Jack Trolley Type 10 Ton Capacity , Tyre Changer Machine Total Quantity : 162

Contract Date: Ref. Documents Contract Value : ₹ 4.31 Lakh

Government Departments No of Bidders 14

Arunachal Pradesh View Result →

14.

Defence #11453217 AOC

Bids Are invited for Repair And Overhauling Service - Repair Of Heavy Duty Electrical Motor For Testing Bench; Repair Of Heavy Duty Electrical Motor For Testing Bench; Yes; Buyer Premises , Repair And Overhauling Service - Repair Of Crane Hydraulic Lifting Light Weight; Repair Of Crane Hydraulic Lifting Light Weight; Yes; Buyer Premises , Repair And Overhauling Service - Repair Of Alternator Test Bench; Repair Of Alternator Test Bench; Yes; Buyer Premises , Repair And Overhauling Service - Repair Of Solar Cctv Ptz Camera; Repair Of Solar Cctv Ptz Camera; Yes; Buyer Premises , Repair And Overhauling Service - Repair Of 2 Cold Water High Pressure Washing Plant; Repair Of 2 Cold Water High Pressure Washing Plant; Yes; Buyer Premises

Contract Date: Ref. Documents Contract Value : ₹ 41,290

Statutory Bodies & Commissions/Committees No of Bidders 3

Jammu and Kashmir View Result →

15.

Railways #11452700 AOC

Contract Date: Jul 02, 2026 Contract Value : ₹ 7.35 Lakh

Government Departments No of Bidders 1

Uttar Pradesh View Result →

16.

Public Administrative Department #11452686 Technical Bid

Tcmc-Supply And Delivery Of 12Nos Of Lcv Mounted 0.35 Cum Capacity Mild Steel Desilting Mahcine , Supply And Delivery Of Mild Steel Desilting Machine Mounted With Light Motor Vehicle With Construction Fo Grab Bucket Capacity Of 0.0055 Cum Lifting Capacity Of 50 Kf With Boom Length Of 9-12 Meterwith Hydraulic Operating System Og Hooper Tipper And Grabbing Boomsand Manually Operating Valvesetcas Per Detailed Technical Specification Mentioned In The Biddocument And Including Rto Registration,Insurance Road Tax And All Other Incidental Charges Etc Complete

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 4

Tamil Nadu View Result →

17.

Railways #11440996 AOC

Supply Of procurement of hydraulic motor for track machine. , hydraulic motor imp , plasser pt.no. hy909x160ha1t/50/280bar, rexroth pt.no.a6vm160ha1t/63wvzb027a or r902209089, make-pla sser, rexroth [ warranty period: 30 months after the date of delivery ] ]

Contract Date: Jul 02, 2026 Contract Value : ₹ 22.86 Lakh

Government Departments No of Bidders 1

Gujarat View Result →

18.

Science and Technology #11440503 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 2

Karnataka View Result →

19.

Housing Urban and Rular Development #11440422 Technical Bid

Tender for Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Viscosity Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type A Or Type B Or Type C As Per Morth Specification Clause 510. Case - Ii By Mechanical Means Bitumen (Vg-30) , Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type A, Type B And Type C As Per Morth Specification Clause 511 By Mechanical Means Case - Ii : Type B Bitumen (Vg-30) , Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2905. 300 Mm Dia , Providing Laying Spreading And Compacting Specified Graded Sand, Gravel (Crushed Stone) As Per Table 400-1,400-2 Or Any Other Course Material As Per Design Mix, As Per Cbr In Sub Base Course Including Premixing The Material At Omc In Wet Mix Plant, Carriage Of Mixed Material Spreading In Uniform Layers With Motor Grader F.E Loader On A Prepared Base And Compacting With Vibratory Roller To Achieve Desired Density (As Per I.S.2720) Including All Material, Labor, Machinery, Lighting Guarding, Barricading And Maintenance Of Diversion Complete.[Morth Specification : Clause 401]. By Mechanical Means. , Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing. , Construction Of Un-Reinforced , Plain Cement Concrete Pavement M30 (Grade), Thickness As Per Design, Over A Prepared Sub Base, With 43/53 Grade Cement As Per Clause 602.2.2 , Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A In Fully Automatic Batching Plant And Transported To Site In Transit Mixer For Having Continous Agitated Mixer, Manufactured As Per Approved Mix Design Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , With All Lead And Lift Including Cost Of Admixtures In Recommended Portion As Per Is 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer In Charge Laid In Approved Fixed Side Formwork (Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film, Wedges, Steel Plates Including Levelling The Formwork As Per Drawing), Spreading The Concrete With Shovels, Rakes, Compacted Using Fixed Form Paver And Finished In Continuous Operation Including Provision Of construction And Expansion, Construction Joints, Applying Debonding Strips, Primer, Sealant Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14-Days Using Water Finishing To Lines And Grade As Per Drawing And Morth Specification Clause 602 Including Vaccum Dewatering Process With All Required Equipments (Dowel Bars Will Be Paid Seprately).

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Rajasthan View Result →

20.

Heavy Industries and Public Enterprises #11435798 AOC

Bids Are invited for Flange Nut BOPHAR000673 , Driver Seat BOPPROP00196 , ACCELEARTOR PEDAL OTH000000279 , BRAKE PEDAL BOPDRV000042 , AIR BREATHER BOPFLB000170 , LEVEL GAUGE SNK 127 BOPPROP00233 , BALL VALVE 1 14 BOPHAR001897 , DIESEL PIPE 1700MM BOPHOS000436 , DIESEL PIPE 1500MM BOPHOS000011 , BUSH MCP000000409 , BUSH MCP000000039 , PIN MCP000001401 , SEAL KIT FOR STG CYL CON000000333 , PIN MCP000000728 , BUSH MCP000000386 , PIN MCP000002346 , SEAL KIT FOR LIFT CON000001115 , BEARING LOCK NUT BOPPR0P00156 , BEARING LOCK WAS BOPPROP00148 , PIN MCP000000858 , PIN MCP000000769 , PALLET ROD MCP000001512 , PALLET LINK PLS000007708 , HUB NUT 22X25 BOPHAR000673 , SEAL CON000000577 , SPACER MCP000002507 , HUB BOLT 22X25X96 BOPHAR000668 , LOCK BOLT BOPHAR000066 , SHOCKER BOPPROP00296 , BRAKE DRUM 10 BOPDRV000039 , LOCK NUT MCP000002090 , Hydraulic Motor Coupling H Series , STG CYLINDER Pt no bohpyi000145 , LIFT CYL PT NO BOPHYI000060 , MASTER CYLINDER ATV BOPDRV00080 , HYD HOSE PT NO BOPHOS000162 , HYD HOSE PT NO BOPHOS000137 , CENTAFLEX MOUNTINGPTNOX7364000047 , Rear Hub TPS Make , Bogie Pin Sz 140X400 , AIR DRYER KIT PT NO BOPPROP00458 , YSTRAINER PT NO OTH000000434 Total Quantity : 411

Contract Date: Ref. Documents Contract Value : ₹ 41.21 Lakh

Boards / Undertakings / PSU No of Bidders 1

Odisha View Result →

21.

Coal and Mines #11428033 Technical Bid

Tender For Repairing Of Hydraulic Pumps Motors And Cylinder Piston Assemblies In Use With 811 Model Lhds Of Shiwani Ug Mine Kalyani Sub Area Bhatgaon Area

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 7

Chhattisgarh View Result →

22.

Home Affairs #11427175 AOC

Contract Date: Jul 02, 2026 Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

West Bengal View Result →

23.

Railways #11426553 AOC

Supply Of hydraulic hose flexible for ventilation fan motor , hydraulic hose flexible for ventilation fan motor to cummins part no.3392 420 used in cummins diesel engine model no. vta 1710l. [ warranty period: 30 months after t he date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]

Contract Date: Jul 01, 2026 Contract Value : ₹ 17,051

Government Departments No of Bidders 1

Tamil Nadu View Result →

24.

Agriculture #11422084 AOC

Bids Are invited for Procurement Of Spares For Escort Rt 30 Tyre Mounted Mobile Crane At Haddo Wharf Hydraulic Motor-Combi Cooler Part No 7101795-08 , Steel Wire Rope Part No 8V 124604600 , Seal Kit O R Horizontal Part No Sdf 2370.000 - Seal Kit O/R Horizontal Part No Sdf 2370.000 , Seal Kit Vertical Out Rigger Part No Sdf 2382.000 , Seal Kit Derrick Cylinder Part No Sdf 2506.000 , Pulley Complete Part No 7100553 , Cylindrical Roller Bearing Part No 30-C-3-005 , Snap Ring Part No 30-C-3-007 Total Quantity : 32

Contract Date: Ref. Documents Contract Value : ₹ 10.77 Lakh

Government Departments No of Bidders 2

Andaman And Nicobar Islands View Result →

25.

Defence #11420876 AOC

Bids Are invited for Power Adopter 19 Point 5 Volt 45 Watt , Hand Tools , Stabilizer 10 Kva , Load Balancer Multi Wan Wired Single Band 1000 Mbps Vpn Router , 3 Ton Hydraulic Jack , 25 Mm Gearbox Trolley , Pressure Pump 3 Piston , 1 Hp Motor , 8 Mm Table Glass 6 Ft X 29 Inch Brown , 8 Mm Table Glass 4 Ft 6 Inch X 2 Ft 6 Inch Transparent - 8 Mm Table Glass 4 Ft 6 Inch X 2 Ft 6 Inch X 29 Inch Transparent , 8 Mm Table Glass 7 Ft 11 Inch X 4 Ft Transparent , In Out Tray 12 Mm Brown , Rj 45 Blocker Pkt Contains 10 Pcs Total Quantity : 35

Contract Date: Ref. Documents Contract Value : ₹ 1.46 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Gujarat View Result →

26.

Public Administrative Department #11418998 AOC

Tender For General-Aroor Gp 2024-25 Pro.No-145/25-Additional Construction In Mcf-General Civil Work - Constraction for machine Room 2 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared 3 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 4 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 5 OD304174/2024-2025:Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site 6 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 7 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 8 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 9 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 10 5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars 11 50.2.25.1:Filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge 12 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 13 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 14 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 15 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) 16 16.71:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer - in- Charge. 17 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete 18 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 19 13.3.2:20 mm cement plaster of mix:1:6 ( 1 cement : 6 fine sand) 20 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 21 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work 22 10.6.1:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover 23 10.7:Providing and fixing ball bearing for rolling shutters. 24 10.8.1:Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area 25 4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 26 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 27 51.2.3:Filling with Quarry Muck
Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade 28 16.78.1:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 29 16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 30 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete 31 9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 32 9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.

Contract Date: Jun 30, 2026 Contract Value : ₹ 21.18 Lakh

Government Departments No of Bidders 2

Kerala View Result →

27.

Defence #11413644 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 16

Jammu And Kashmir View Result →

28.

Defence #11407807 AOC

Bids Are invited for Pet Tools And Equipment Filter Opening Wrench Mahindra Bolero - Filter Opening Wrench (M&M Bolero) , Mahindra Bolero Differential Drain Opening Socket - M&M Bolero Differential Drain Opening Socket , Electric Cordless Impect Wrench Opening Machine With Socket Set Heavy Duty - Electric Cordless Impect Wrench Opening Machine With Socket Set (Heavy Duty) , Small Socket Set , Fuel Pipe Lock Opening Plier , Heavy Vehicle Hydraulic Jack Ten Ton - Heavy Vehicle Hydraulic Jack 10 Ton , Filter Opening Wrench Ashok Leyland - Filter Opening Wrench (A/L) , Puller For Removing Gear - Puller (For Removing Gear) , Clutch Hub Check Nut Puller For Motor Cycle , Tappet Adjuster For Motor Cycle , Magenet Puller For Motor Cycle , Oil Filter Removing Tool Chain Type , Puller Small For Bearing Remove - Puller Small (For Bearing Remove) , Screw Driver Plus And Minus Two In One Twelve Inch - Screw Driver (+-) Two In One 12 Inch , Hydrometer , Digital Multimeter , Soldering Iron , Nose Plier , Elak Battery Tester For Testing , Combination Player Eight Inch - Combination Player 8 Inch , Gas Regulator For Oxygen Isi Mark - Gas Regulator For Oxygen (Isi Mark) , Gas Regulator For Da Isi Mark - Gas Regulator For Da (Isi Mark) , Bosch Hammer Drill Gsb10re , Welding Holder , Drill Bit Set , Measurement Tape 05 Mtr , Welding Cable 25 Meter , Cutting Plier , Impact Goti Set , Ball Pin Hammer 800 Gm And 500 Gm , White Goggles , Angle Cutter Machine Bosch , Bench Grinder Wheel Fine , Bench Grinder Wheel Ruff , Writing Brush Zero To Twelve No - Writing Brush 0 To 12 No , Painting Brush Two Inch , Scale Steel Rule 2.5 Feet , Buffer Machine , Painting Mask , Spray Gun For Painting , Air Liner Pipe - Air Liner (Pipe) , Heavy Duty Tyre Lever Big Size - Heavy Duty Tyre Lever (Big Size) , Hammer Three Kg - Hammer 03 Kg , Tyre Buffing Machine , Hot Puncture Machine , Liquid Tyre Pressure Gauge , File For Buffing , Chisel Sixteen Inch For Tyre Puncture - Chisel 16Inch For Tyre Puncture , Hacksaw Frame Taparia , Chisel For Carpentary , Scissor , Motor For Sewing Machine Total Quantity : 110

Contract Date: Ref. Documents Contract Value : ₹ 1.14 Lakh

Government Departments No of Bidders 6

Rajasthan View Result →

29.

Defence #11407729 AOC

Bids Are invited for Procurement Of Ship Fitting Section Items Cordless Wrench - Heavy Duty Cordless Impact Wrench Gds 18 V To 400 M20 Brushless Motor 1050 Nm 3700 Bpm 2X Battery Gba 18 V 5 Ah X Quick Charger , Pressure Testing Machine - Model Ti Ip 17155 1000 Psi Hydraulic Pressure Test Pump R2 1 1Nd Half Inch Hose With Pressure Gauge 0 To 70 Kg Cm2 , Circlip Plier Internal - Size 13 Inch , Screw Driver - Size 18 Inch , Gasket Cutting Machine With Accessories - Model Gc 42 Capacity 42 Inch Od , Hollow Punch Set - Size 12 Mm 15 Mm 20 Mm 25 Mm , Ring Spanner - Size 6 To 7 And 24 To 27 , Tube Cutter Heavy Duty - Model 93 021 22 Size 3Mm To 28 Mm Total Quantity : 9

Contract Date: Ref. Documents Contract Value : ₹ 61,675

Government Departments No of Bidders 8

Tamil Nadu View Result →

30.

Road Transport and Highways #11407712 AOC

Bids Are invited for Lubricants Sae Api 15W40 Ck 4 Or Ci4 , Tata Motors Genuine Engine Oil 5 W 30 Full Synthetic , Mahindra Max Mile Ultra V4 , Sae 15 W 30 , 80 W 90 , 85 W 140 , Coolant Green , Maximile Ultra Cool 2 X Ready To Use , Dot-4 , F-10 , T-20 , Stfa , Streering Oil , Wheel Bearing Grease Wb , Grease Rr-3 , Hlp 46 , Th-46 , Hlp-68 , Lubricant Ss-100 , Hlp 32 , Su-30W , Hyd Oil Ultra Slm Ajax , Hydraulic Oil Sandvik-Oh 68 , Shank Oil-Os 100 , Compressor Oil Sandink Oc 25-H , Servo Hydrex 100 , Ad Blue Iso 22241 Or Diesel Exhaust Fluid , Tata Genuine Def , Def Maxi Clean For M-Scorpio , Def Sml Ad Blue Total Quantity : 14279

Contract Date: Ref. Documents Contract Value : ₹ 36.96 Lakh

Government Departments No of Bidders 4

Arunachal Pradesh View Result →

31.

Defence #11406423 AOC

Bids Are invited for Chain And Sprocket Kit , Brake Pad , Brake Shoe Assy , Element Oil Filter , Spark Plug , Cable Assy Speedometer , Clutch Cable Assy , Clutch Assy Complete , Brake Shoe Spring , Valve Assy , Fuel Pump Assy , Ac Compressor , Fuel Filter Assy , Turbocharger Hose , Brake Sensor , Brake Shoe , Brake Pad Set , Disc Brake , Wiper Motor , Cyl Assy Hyd Brake Master , Blower Coolant Valve , Parts Kit Hydraulic Ram Abliqe Ram Service Kit , Oil Filter , Air Filter , Spider Universal Joint Vehicular Total Quantity : 35

Contract Date: Ref. Documents Contract Value : ₹ 1.04 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Sikkim View Result →

32.

Public Administrative Department #11405848 Technical Bid

Tender for Supply Of Bearings For Pumps And Motors At Hirani, Khatpura And Ahmedpur Pumping Station Under Nwsp Bhopal , Cylindrical Roller Bearing Skf Nu 226 C3 (Motor) , Ball Bearing Skf 7322 Bg (Motor) , Cylindrical Roller Bearing Skf Nu 221 C3(Motor) , Ball Bearing Skf 6221 C3 (Motor) , Bhr 70 Make Kbl Journal Bearing Part No.3710101(Pump) , Roller Bearing Nu 322 C3 (Motor) , Ball Bearing Skf 6322 C3 (Motor) , Hfl2026 Niddle Cluch Bearing , Ball Bearing Skf 7320 Becbp (Pump) , Ball Bearing Skf 6218 C3 (Pump) , Ball Bearing Skf 6314 C3 (Pump) , Hfl 2530 Niddle Cluch Bearing , Thrust Spherical Roller Bearing Skf 29322E (Pump) , Tmma 100H Skf Hydraulic Bearing Puller , Ball Bearing Skf 7218 Bep (Pump) , Thrust Ball Bearing Skf 51105

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Madhya Pradesh View Result →

33.

Housing Urban and Rular Development #11393708 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Delhi View Result →

34.

Defence #11391814 AOC

Contract Date: Ref. Documents Contract Value : ₹ 2.49 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 5

Assam View Result →

35.

Road Transport and Highways #11391084 AOC

Bids Are invited for Spcf-15W40 , Sae 05W30 , Servo Ultra Kb 30 , Su-10 Kb-310 , Servo Gear 80W90 , Castrol Antifreeze Hp Coolant , Jcb Gear Oil Hd-90 Hp Plus , Hyd Oil Tutela , Servo Transmission F10 , Tata Motors Dot 4Clutch Oil , Supercool , Stf-A , Stf-10 , Hlp 32 Servo Hyd32 , Servo System Hlp46 , Servo System Hlp 68 Hydrex 68 , Servo System100 , Servo Hydrex Th46 , Servo Greasewb , Grease Mp Rr-03 , Starting Aid Capsules , Def Ad Blue , Mahindra Maxmile Ultra Engine Oil , Diesel Exhaust Fluid Tatagenuine , Engine Coolant Premixed , Jcb Rear Axle Oil , Mahindra Maximile Feo Engine Oil , Mahindra Maximile Syntec F2 Transmission Oil , Mahindra Maximile Elite Differential Fluid , Mahindra Maximile Dot4 Brake Fluid And Clutch , Mahindra Maximile Ultra Engine Oil , Mahindra Maximile Ultra Cool Coolant , Mahindra Maxi Clean Disel Exhaust Fuild , Mahindra Maximile Synchro Uv2 , Mahindra Maximile Power Steering Fluid , Maximile Dot 3 Clutch And Brake Fluid Of Mahindra Bolero C Er , Rose Blue Def , Mahindra Maxmilefeo , Maxmile Feo Api Gh4 Sae 15W40 , Jcb Hvi Hydraulic Fluids , Jcb Gear Oil , Gear Lub Ep-O Grease , Sgs 85W90 , Ssmg 20W40 , Tutela W90 M-Da Sae80w90 , Maximile Plus Gear Oil Zf Eco Fluid , Shell Tellus Oil T 15 Cab Bilt , Maximile Plus Maxo Rear Axle Oil , Ad Blue Mixture Def , Sae 10W40 Ck4 Sae 5W40 Ck4 , Bharatbenz Ad Blue , Bharatbenz Coolant Glysantin G48 Or G40 , Bharatbenz Steering Oil Atf Mx Total Quantity : 26520

Contract Date: Ref. Documents Contract Value : ₹ 1.02 Crore

Government Departments No of Bidders 7

Sikkim View Result →

36.

Coal and Mines #11371031 AOC

Bids Are invited for Facility Management Services - Lumpsum Based - Annual Operation And Maintenance Of Sprinklers Around Coal Stock Yard And Near Weigh Bridge At Mkd I Oc Mine Of Makardhokda Sub Area For 01 Year 2Nd Call; O M Of Civil Work; Consumables To Be Provided .. - Operation And Maintenance Of Fixed Sprinklers Including Operating Pump/Motor And Attached Valves Of Pipe Line And Oiling/Greasing The Sprinklers Once In The Forenightly Including Repairing Of Damaged Pipe Including Fittings, Welding, Flange Joint Etc. By Engaging Plumber Complete As Per Instruction Of Engineer Incharge. Operation Of Sprinklers Shall Be In Two Shifts Of 08 Hours Each By Engaging Minimum One Manpower In Each Shift. (For 2 Shifts) And To Repair/Replacement Of Parts Of Sprinklers, Pipeline Etc. 1 No. Of Skilled Manpower (Twice In A Month) , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil.

Contract Date: Ref. Documents Contract Value : ₹ 5.50 Lakh

Boards / Undertakings / PSU No of Bidders 3

Maharashtra View Result →

37.

Coal and Mines #11370829 AOC

Bids Are invited for Facility Management Services - Lumpsum Based - Annual Operation And Maintenance Of Sprinklers Along Coal Transportation Road Rub To Mkd I Coal Stock At Mkd I Oc Mine Of Makardhokda Sub Area For 01 Years; O M Civil Work; Consumables To Be Provided B.. - Operation And Maintenance Of Fixed Sprinklers Including Operating Pump/Motor And Attached Valves Of Pipe Line And Oiling/Greasing The Sprinklers Once In The Forenightly Including Repairing Of Damaged Pipe Fitting Etc. Complete As Per Instruction Of Engineer Incharge. Operation Of Sprinklers Shall Be In Two (02) Shifts Of 08 Hours Each By Engaging Minimum Two (02) Manpower In Each Shift. (For 02 Shifts). , To Repair/Replacement Of Parts Of Sprinklers, Pipeline Etc. (01 Skilled Manpower In Once In A Week (General) Shift) , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Cl S, I/C Cutting And Making Good The Walls Etc. Internal Work - Exposed On Wall 50 Mm Dia Nominal Bore , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) : 50 Mm Nominal Bore

Contract Date: Ref. Documents Contract Value : ₹ 9.92 Lakh

Boards / Undertakings / PSU No of Bidders 3

Maharashtra View Result →

38.

Defence #11370640 AOC

Bids Are invited for Tata Jd 315 Se Spare Parts Joint - 367832171 , Tube - X31xcpk3763d021 , Seal - X31xcpk338117135 , Hose - X31xcpk33872532 , Joint - X31xcpk3686t006 , Joint - X31xcpk3681as021 , Pipe Oil Assy - X31xcpk3576m005 , Kit Water Pump Repair - X31xcpkpiu7lw0149 , Belt - X31xcpkl07de00012 , Joint - X31xcpk3683d006 , Hose - X31xcpk33853123 , Joint - X31xcpk36833144 , Clip - X31xcpk36568145 , Hose Elbow - 61161Telcontd001652 , Filter Element Inner - 61161Telconte01665 , Filter Element Outer - 61161Telconte01666 , Hose - 61161Telconte01931 , Cl - 61161Telcontd011602 , Cl - 61161Telconted239 , Gasket - 61161Telcon3124921080 , Hose Lower - 61161Telcontc00727 , Hose Upper - 61161Telcontd01552 , Grommit - 61161Telcontd158677 , O Ring - 61161Telconr26375 , Grommit - 61161Telconte01666 , Boot - 61161Telcont22241 , Boot - 61161Telcont130086 , Grommit - 61161Telcont63817 , Hydraulic Hose 915 Lg - 61161Telconat171637 , Hose - 61161Telconte02214 , Air Filter - 61161Telconat101565 , Oil Tube - 61161Telconte02638 , Element Filter - 61161Telcont144879 , Oil Filter - 61161Telcon179323 , Air Filter Element Inner - 61161Telconed1665 , Air Filter Element Outer - 61161Telconted1666 , Oil Filter - 61161Telconti07515 , Fuel Filter Element - 61161Telconte02516 , Wiper Motor - 61161Telcontn261087404904 , Oil Press Switch - 61161Telconte00429 , Horn - 61161Telcont257454209969 , Switch Park Brake - 61161Telcontd01870 , Elec Press Gauge - 61161Telcontd01187 , Elec Press Gauge - 61161Telcontd01188 , Fuel Gauge - 61161Telcontd01190 , Ammeter - 61161Telcontd01197 , Warning L - 61161Telcontwe00392 , Engine Oil Press Amd L - 61161Telcontnwe00315 , Indicator L - 61161Telconte02057 , Indicator - 61161Telconte02058 , Starter Push Bnutton Switch - 61161Telcon257354509927 , Boot - 61161Telcont145629 , Shank Tooth - 61161Telconu43792 , Boot - 61161Telconte23p , Hydraulic Hose - 61161Telconre20342 , Hydraulic Hose - 61161Telconf2863r , Hydraulic Hose - 61161Telconat173130 , Hydraulic Hose - 61161Telconat173134 , Hydraulic Hose - 61161Telconat173135 , Hydraulic Hose - 61161Telcon176541 , Hydraulic Hose - 61161Telconat173101 , Hose - 61161Telconat180140 , Ball Joint - 61161Telconat165087 , Gasket - 61161Telconat154093 , Ball Joint - 61161Telconat169087 , Seal Kit - 61161Telconat168632 , O Ring - 61161Telcont77613 , O Ring - 61161Telconr264448 , Seal Kit Relife Valve - 61161Telconat178359 , Seal Kit Spool Seal - 61161Telconat178372 , Seal Kit Relife Valve - 61161Telconat178359 , Seal Kit Spool Seal - 61161Telcontd178371 , Seal Kiy Relief Valve - 61161Telcontd178360 , Kit Relief Valve - 61161Telcontd178372 , Seal Kit - 61161Telcontd178359 , O Ring - 61161Telconat118685 , Seal Kit Spool Seal - 61161Telcontat178372 Total Quantity : 231

Contract Date: Ref. Documents Contract Value : ₹ 4.24 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Ladakh View Result →

39.

Defence #11370412 AOC

Bids Are Invited For Mt 32 Fuel Filter Assembly , Engine Speedo Sensor , Control Valve Cap , Timing Belt , Fan Belt , Starter Motor Assembly , Fuel Pump Motor , Wheel Bearing Front , Ignitin Coil , Spark Plug , Horn Assembly , Hydraulic Head , Pump Element , Delevery Valve , T D Pistion Total Quantity : 32

Contract Date: Ref. Documents Contract Value : ₹ 60,180

Statutory Bodies & Commissions/Committees No of Bidders 3

Gujarat View Result →

40.

Public Administrative Department #11367861 AOC

Tender For Annual Plan-Thurayur Gp Annual Plan 2025-26(Pro.No:73/26)-V K Krishnamenon Road Improvement-General Civil Work - ROAD 2 3.2:Preparation of Foundation for EmbankmentScarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical MeansScarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4. 3 OD132717/2025-2026:Granular Sub-base with scarified material By Mix in Place Method
Construction of granular sub-base by providing scarified material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
(i) For Grading I Material 4 4.1.A.1:Granular Sub-base with Well Graded Material (Table 400.1)(A) By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(i) For Grading I Material 5 4.9:Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.By Mechanical Means with 1 km lead 6 75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen RatesProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 7 75.5.2.3pb:Tack Coat - With Packed Bitumen RatesProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. 8 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen RatesProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509By Manual MeansType A(II) Bitumen (S-65) 9 75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

Contract Date: Jun 25, 2026 Contract Value : ₹ 6.77 Lakh

Government Departments No of Bidders 2

Kerala View Result →

41.

Public Administrative Department #11367858 AOC

Contract Date: Jun 25, 2026 Contract Value : ₹ 5.08 Lakh

Government Departments No of Bidders 1

Kerala View Result →

42.

Public Administrative Department #11367855 AOC

Tender For Annual Plan-2025-26 Varandarappilly Gp Pr No 87/25 Pallikkunnu Snehanagar Road Tarring -In Ward 22-General Civil Work - Tarring of road 2 3.15.2:Compacting Original Ground (ii) Compacting original ground supporting subgrade Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2. 3 4.11.2:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408.
(ii) Using Gravel mix soil. 4 4.9:Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.By Mechanical Means with 1 km lead 5 75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen RatesProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 6 75.5.2.3pb:Tack Coat - With Packed Bitumen RatesProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. 7 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen RatesProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509By Manual MeansType A(II) Bitumen (S-65) 8 OD146874/2025-2026:Supplying and fixing MS Name board with 1.2m length post from ground level, having board dimension 80 x 45 c.m, lettering done with black enamel Paint on yellow back ground, including the cost of all materials , labour and conveyance charges etc complete.

Contract Date: Jun 25, 2026 Contract Value : ₹ 2.09 Lakh

Government Departments No of Bidders 2

Kerala View Result →

43.

Power #11360697 AOC

Bids Are invited for Dry Disc Connecting Coupling - Dry Disc Connecting Coupling (Btw BFP Motor and Hydraulic Coupling) Cubic Dry Disc Connecting Coupling Model EH 200 as per our drawing no. 101014300 Suitable for 4000KW at the rate of 3000RPM, between Motor to Voith make Hydraulic Coupling R-16K.1 , Set of Element Assembly for Disc Coupling Model EH 200 - Set of Element Assembly for Disc Coupling Model EH 200, coupling between Motor to Hydraulic Coupling R-16K (02 Nos. Element Assembly in 01 Set) , Set of Coupling Bolts and nuts along with overload washer for Disc Coupling Model EH 200 - Set of Coupling Bolts and nuts along with overload washer for Disc Coupling Model EH 200, coupling between BFP Motor and Hydraulic Coupling R-16K (01 Nos. Coupling Bolts + 01 Nos. Lock Nuts + 01 Nos. Overload washers in 01 Set) , Dry Disc Connecting Coupling Model EH 110 - Dry Disc Connecting Coupling Model EH 110 as per our drawing no. 101014200 Suitable for 4000KW at the rate of 4500RPM, between Voith make Hydraulic Coupling R-16K to BHEL make 200 KHI Boiler Feed pump , Set of Element Assembly for Disc Coupling Model EH 110 - Set of Element Assembly for Disc Coupling Model EH 110, Coupling between Hydraulic Coupling R-16K to 200 KHI Boiler Feed Pump (02 Nos. Element Assembly in 01 Set), Suitable for 4000KW at the rate of 4500RPM, between Boiler Feed Pump 200KHI/200KHIs to Hydraulic Coupling R-16K.1 , Set of Coupling Bolts and nuts along with overload washer for Disc Coupling Model EH 110 - Set of Coupling Bolts and nuts along with overload washer for Disc Coupling Model EH 110, Coupling between Hydraulic Coupling R-16K to 200 KHI Boiler Feed pump (01 Nos. Coupling Bolts + 01 Nos. Lock Nuts + 01 Nos. Overload washers in 01 Set) Total Quantity : 32

Contract Date: Ref. Documents Contract Value : ₹ 29.40 Lakh

Government Departments No of Bidders 2

Uttar Pradesh View Result →

44.

Health and Family Welfare #11359851 AOC

Bids Are invited for Glass Reinforced Concrete Grc Screens Of 8 Feet X 4 Feet , Stainless Steel Grade 304 Main Drain Cover Of Size 2 Feet 3 Inch X 1 Feet 11 Inch , Double Action Hydraulic Floor Spring Make Sandhu Or Equivallent , Expendable Fastner 6 Inch , Floor Nozzle With Necesary Stainless Steel Screws 63Mm , Floor Nozzle With Necesary Stainless Steel Screws 40Mm , Motar Starter Star Delta Starter 10Hp Motor , Mortor Starter Dol Starter 1 Point 5 To 3Hp Motor , Activated Media Sand , Ball Valves Isi Controllong The Pressure Of The Flow Double Union 63 Mm , Non Return Valve Isi Of 150 Mm Diameter Ci , Aluminium Wire Total Quantity : 640

Contract Date: Ref. Documents Contract Value : ₹ 4.96 Lakh

Government Departments No of Bidders 2

Chandigarh View Result →

45.

Defence #11359518 AOC

Bids Are invited for Spares And Accessories Starter Motor 12V - Tmb , Plate Clutch Disc Cluth - Tmb , Hose Hyd Pressure - Stln , Ram Hydraulic , Ram Assy - Stln , Nozzle - Stln , Hose - Icvs , Hose, F 7870540 - Stln Total Quantity : 13

Contract Date: Ref. Documents Contract Value : ₹ 50,509

Statutory Bodies & Commissions/Committees No of Bidders 3

Uttar Pradesh View Result →

46.

Housing Urban and Rular Development #11351625 Technical Bid

Tender for Development Of Landscaping Work Of Tower Of Justice In Distt. Gurugram (Additional Work). , Installation Of Submersible Tubewell Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart/ Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer-In-Charge, Up To 90 Metre Depth Below Ground Level. All Types Of Soil 400 Mm Dia (Hsr 33.6.1.3) , Boring/Drilling Bore Well Of Required Dia For Casing/ Strainer Pipe, By Suitable Method Prescribed In Is: 2800 (Part I), Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart/ Bore Log, Including Hire And Running Charges Of All Equipments, Tools, Plants And Machineries Required For The Job, All Complete As Per Direction Of Engineer -In-Charge, Beyond 90 Metre And Up To 150 Metre Depth Below Ground Level. All Types Of Soil 400 Mm Dia (Hsr 33.7.1.3) , Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Unplasticised Pvc Medium Well Casing (Cm) Pipe Of Required Dia, Conforming To Is: 12818, Including Required Hire And Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer -In-Charge. 200 Mm Nominal Size Dia (Hsr 33.8.3) , Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well Unplasticised Pvc Medium Well Screen (Rms) Pipes With Ribs, Conforming To Is: 12818, Including Hire And Labour Charges, Fittings And Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer-In-Charge.200 Mm Nominal Size Dia (Hsr 33.9.3) , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc. 50 Mm Dia Nominal Bore (Hsr 22.88.6) , Supply And Jointing Three Core Submersible Flat Cables Of Approved Make With Bare Bunched Copper Conductor Insulated And Sheathed With Pvc For Submersible Pump Motors /Fountain Lights Etc With Voltage Grade 1100 Volts Marked With Is:694, 1990 Including Cost Of Jointing, Materials As Well As Carriage, Loading, Unloading Etc. Complete In All Respect Up To The Entire Satisfaction Of Engineer- In-Charge. Submersible Copper Cable 3 Core 1.5 Sqmm (Hsr 24.5.1.2) , Supply And Lowering Isi Mark 5 Hp Single Phase Submersible Motor With Pump Of Lubi, Ksb, Crompton, Texmo Etc (Along With Nylon Rope) (Ns) , Providing And Fixing Suitable Size Threaded Mild Steel Cap Or Spot Welded Plate To The Top Of Bore Well Housing/ Casing Pipe, Removable As Per Requirement, All Complete For Bore Well Of: 200 Mm Dia (Hsr 33.16.3) , Providing And Fixing M.S. Clamp Of Required Dia To The Top Of Casing/ Housing Pipe Of Tube Well As Per Is: 2800 (Part I), Including Necessary Bolts & Nuts Of Required Size Complete. 200 Mm Clamp (Hsr 33.17.3) , Providing And Fixing Bail Plug/ Bottom Plug Of Required Dia To The Bottom Of Pipe Assembly Of Tube Well As Per Is:2800 (Part I). 200 Mm Dia (Hsr 33.18.3) , Supply And Fixing Isi Mark Panel Board Of 5 Hp Of Bch, Cuttler Hammer, L&T, Boparai Etc. With Lock & Key Steel Box (Ns) , Supply And Fixing Of 16 Mm Aluminium Cable 3 Core Of R.R./Havells/Fenolux Make.(Ns) , Supplying, Filling, Spreading And Levelling Gravels Of Size Range 5 Mm To 10 Mm, In The Recharge Pit, Over The Existing Layer Of Boulders, In Required Thickness, For All Leads And Lifts, All Complete As Per Direction Of Engineer-Incharge.(Hsr 33.13) , Hire Charges For Hydraulic Excavator/Loader Like Jcb/Pock Lain, Hitachi Etc With All Accessories Having Bucket Capacity 1. Hire Charges Forjcb With Bucket Capacity Of 0.4 Cum (Hsr 14.51.1). , Hire Charges Of Tractor With Trolly, Driver & Diesel. (Ns)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Haryana View Result →

47.

Housing Urban and Rular Development #11350867 Technical Bid

Tender for Providing And Constructing Temporary Island 11M Diameter For Construction Of Well Foundation For 5.50M Dia Well. , Cutting Edge Of Mild Steel Providing And Laying Cutting Edge Of Mild Steel Weighing 40 Kg Per Metre For Well Foundation Complete As Per Drawing And Technical Specification. , Reinforced Cement Concrete Work In M-25 In Well Curb With Cement , Approved Coarse Sand & 2 Cm. Gauge Well Graded Grit Including Necessary Shuttering , Placing And Fixing Of Reinforcement Including Its Binding With Wire But Excluding Cost Of Reinforcement And Also Including Supply Of All Materials, Labours T&P Etc. Required For Proper Completion Of The Work. , Reinforced Cement Concrete Work In M-25 In Well Steining With Cement , Approved Coarse Sand & 2 Cm. Gauge Well Graded Grit Including Necessary Shuttering , Placing And Fixing Of Reinforcement Including Its Binding With Wire But Excluding Cost Of Reinforcement And Also Including Supply Of All Materials, Labours T&P Etc. Required For Proper Completion Of The Work. , Sinking Of Wells 5.00Mtr. External Dia Through All Kinds Of Sand Silt, Clay Except Hard Stratum Like Kankar, Boulders, Rocks Only Below The Low Water Level Including Loading And Unloading Of Weight And Pumping Out Of Water Including Necessary T&P Machines, Labour Etc. Was Required For Proper Completion Of The Work (0.00 Meter To 3.00 Meter) , As Per Item No. 5 But 3.00 Meter To 10.00 Meter. , As Per Item No. 5 But 10.00 Meter To 15.00 Meter. , cement concrete Work In M-25 In Bottom Plugging Of Well With Cement, Approved Coarse Sand And 2Cm Gauge Well Graded Grit Including Necessary Shuttering, Placing & Fixing Of Reinforcement Including Its Binding With Wire But Excluding Cost Of Reinforcement & Also Including Supply Of All Materials, Labours T&P Etc. Required For Proper Completion Of The Work. , cement concrete Work In M-20 In Intermediate Plugging Of Well With Cement , Approved Coarse Sand And 2Cm Gauge Well Graded Grit & Also Including Supply Of All Materials , Labours T&P Etc. Required For Completion Of The Work , Sand Filling In Side The Well Between Bottom And Top Plugging Including Watering Ramming And Also Including Necessary T&P Etc. Required For Proper Completion Of Work (Labour Only) , Reinforced Cement Concrete Work In M-25 In Well Caps With Cement Approved Coarse Sand & 2Cm Gauge Well Graded Grit Including Necessary Shuttering Placing & Fixing Of Reinforcement Including Its Binding With Wire But Excluding Cost Of Reinforcement And Also Including Supply Of All Materials, Labours T&P Etc. Required For Proper Completion Of The Work. , Reinforced Cement Concrete Work In M-30 In Substructures With Cement, Approved Coarse Sand & 2Cm. Gauge Well Graded Grit Including Necessary Shuttering ,Placing And Fixing Of Reinforcement And Also Including Supply Of All Materials, Labours T&P Etc. Required For Proper Completion Of The Work. , Furnishing And Placing Rcc/Psc M-35 In Superstructure As Per Drawing And T.S. With Cement Approved Coarse Sand & 2Cm Gauge Well Graded Grit Including Necessary Shuttering , Placing & Fixing Of Reinforcement Including Its Binding With Wire But Excluding Cost Of Reinforcement & Also Including Supply Material , Labour And T&P Etc. Required For Proper Completion Of The Work , Providing And Laying Cement Concrete Wearing Coat M-30 Grade Including Reinforcement As Per Mort&H Specifications 2702 Complete As Per Drawing And Technical Specifications , Hysd Steel Or Iron Work In Well Steining ,Well Cap, Abutments And Their Caps, Slabs, Curbs Etc. Brought To Required Shape Including Cutting, Bending & Also Including Cost Of Necessary Reinforcement For Proper Completion Of Work. (In Foundation) , As Per Item No. 15 But In Substructure , As Per Item No. 15 But In Superstructure , Plain Cement Concrete Below Aaproach Slab With 2 Cm Gauge Approved Stone Ballast , Approved Coarse Sand And Cement In The Proportion Of 1:2:4 Including Supply Of All Material, Labour And T&P Etc. Required For Proper Completion Of Work As Per Sor Ch.5-7(4.1) , M-30 Grade Reinforced Cement Concrete In Approach Slabs As Per Drawings And Clause 1200,500&1700 Of Morth Specifications (2001) , Supplying Fitting & Fixing In Position To Line And Level Elastomeric Bearing Of Approved Company/ Manufacturer Conforming To Irc : 83(Part-Iii) Section-Ix And Clause 2005 Of Morth Specifications Complete Including All Accessories As Per Drawing And Technical Specification. , Providing And Laying Of A Strip Seal Expansion Joint Catering To Maximum Horizontal Movement Upto 70 Mm, Complete As Per Approved Drawings And Standard Specifications To Be Installed By The Manufacturer/Supplier Or Their Authorised Representative Ensuring Compliance To The Manufacturers Instructions For Installation. , Cement Concrete With 4 Cm Gauge Approved Stone Ballast , Approved Coarse Sand And Cement In The Proportion Of 1:4:8 Including Supply Of All Material, Labour And T&P Etc. Required For Proper Completion Of Work In V.T. Base As Per . Sor Ch.5-3(4.1) , Supplying & Fixing Of 100Mm Dia Drainage Spouts Complete As Per Drawing And Technical Specificationwork. 2705 , Construction Of Embankment With Approved Material Obtained From Borrow Pits With All Lifts And Leads Up To 2 Km, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Table 300-2. , Construction Of Granular Sub-Base By Providing Close Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Front End Loader At Omc, And Compacting With Vibratory Roller To Achieve The Desired Density, Complete As Per Clause 401 , Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mix Plant Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers With Grader In Sub- Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achieve The Desired Density. , Providing And Applying Tack Coat With Bitumen Vg-10 Grade Using Bitumen Distributor At The Rate Of 0.35 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. , Providing And Laying Dense Graded Bituminous Macadam With 100-120 Tph Batch Type Hmp Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.50 Per Cent By Weight Of Total Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 505 Complete In All Respects. , Providing And Laying Bituminous Concrete With Higher Capacity Batch Type Hot Mix Plant Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Vg-30 @ 5.4 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 507 Complete In All Respects , Providing And Laying Filter Material Underneath Pitching In Slopes Complete As Per Drawing And Technical Specification As Per Mort&H Specification 2504 , Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media Including Boulder Apron Laid Dry In Front Of Toe Of Embankment Complete As Per Drawing And Technical Specifications As Per Mort&H Specification 2504

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Uttar Pradesh View Result →

48.

Drinking Water Supply and Sanitation #11348134 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Jharkhand View Result →

49.

Heavy Industries and Public Enterprises #11347107 AOC

Bids Are Invited For Hydraulic Coupling And Mandatory Spares Koderma Fp9760207125 Hyd Coup 30 Duty Mdg366 Bfp Var 12 , Fp9760207869 Auxiliary Oil Pump Assy For Var 12 , Fp9760207885 Bearing Set For Hyd Coupling Var 12 , Fp9760207877 Gear Driven Lo Wo Pumps For Var 12 , Fp9760207893 Input Output Shaft With Gears Hc Var 12 , Fp9760207915 Mdbfp Aux Lube Oil Pump Motor Var12 , Fp9760207907 Lo Filter Elements Orings Gaskets Var12 , Fp9760207630 Oil Level Transmitter Of Hc Var07 , Fp9760207559 Dpt For Oil Filters Pos For R111kgs , Fp9760207583 Pt 0 6 Kg Wqcm For Lo Wo Pr Hc 800Mw Total Quantity : 16

Contract Date: Ref. Documents Contract Value : ₹ 18.22 Crore

Government Departments No of Bidders 1

Telangana View Result →

50.

Power #11346711 AOC

Contract Date: Ref. Documents Contract Value : ₹ 46.91 Lakh

Boards / Undertakings / PSU No of Bidders 1

West Bengal View Result →

TenderDetail

Loading tenders