View Bid Results For High Yield Steel Pipe Tenders

We found 636 Bid Results related to high yield steel pipe tenders. You can find Contractor details who won high yield steel pipe tenders along with contract details in Bid awards announcements section.

Indian Tenders
4
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
431
157
48
Tender Publishing Platform
18
618
State / UT
28
159
108
107
63
21
20
19
18
17
17
11
10
8
7
6
6
6
5
5
5
4
4
3
2
2
1
1
1
Contract Value
276
54
199
104
Publish Date
2
0
0
0
0
Sector
24
189
112
90
64
43
30
29
18
13
10
7
7
6
4
2
2
2
2
1
1
1
1
1
1
Ownership
5
384
120
93
36
3
Within keyword
Active filters:
Showing 1–13 of 636 tenders matching your filters
1.
Defence #11392756 Technical Bid
Tender for Demolition Of Brick Work /Stone Masonry Masonry Built In Cement Mortar Of Any Description Complete All As Specified And As Directed. , Demolition Of Stone Slabs And Tiles Laid Dry And Dry Or Pointed Of Any Description Or Thickness Infloors, Aprons Etc Complete All As Specified And As Directed. , Taking Down Shutters Of Any Description Exc 1 Sq. M And N Exc 2 Sq. M Each Removing To Store Complete All As Specified And As Directed. , Demolition Of Cement Concrete And Paving Not Exc 15 Cm Thick (Below Or Above Ground Level) Complete All As Specified And As Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Area N.Exc. 1.5 Sqm Including Builders Hardware Each Complete All As Specified And As Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Area Exceeding 1.5 Sqm But Not Exceeding 4 Sqm Each Including Builders Hardware Complete All As Specified And As Directed. , Dismantling Plain Or Corrugated Steel Sheeting Any Gauge Thickness Including Nanital Or Similar Pattern Roof Covering Complete All As Specified And As Directed. , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Etc Complete All As Specified And As Directed , Dismantling Wall And Ceiling Boards Or Insulation Boards, Any Thickness, Any Description, Including Cover Fillets Complete All As Specified And Directed. , Taking Down Cement Plaster Of Any Description Hacking For Key Or Raking Out Joint On Old Brick Work/ Stone /Concrete Surface Etc Complete All As Specified And As Directed , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding But Not Backing Complete All As Specified And As Directed. , Excavating In Post Holes (Or Similar Holes) Each Not Exceeding 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50M And Making Good Surfaces In Soft/Loose Soil Complete All As Specified And As Directed. , Material And Labour For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Under Bedding For Interlocking Tiles Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete Type D-2 1:4:8 (With Using 40 Mm Graded Stone Aggregates) As In Foundations And Mass Concrete Etc Complete All As Specified And As Directed , Material And Labour For Providing Cement Concrete Type B0 1:2:4 (Using 12.50Mm Graded Stone Aggregate) In Copings, Parapets And, Kerbs, Water Troughs/ Chajjas And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating As Directed , Material And Labour Brickwork (Old Size Brick) With Sub Class ‘B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar 1:4 Etc Complete All As Specified And As Directed , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc To Any Radius In Half Brick Thick Walls Built In Built In Cm 1:4 Complete All As Specifed And Directed , Material And Labour 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Jambs, Pillars, Window- Cills,Cooking Platforms, Working Table And Like Over 20 Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:4), Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite , Material And Labour For 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) For Wall Lining (Veneering To Wall) 10Mm Thick In Cement Mortar (1:3) And Pointing With White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. , Supply And Fix 30 Mm Thcik Flush Shutters, Solid Core Construction, With Block Board Core And Plywood Face Panels, Commercial Type On Both Sides Complete All As Specified And As Directed. , Supply And Fix 30Mm Thick 2Nd Class Hw Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc.Divided Into Squares, With Plain,Chamfered Or Rounded,Mitred And Rebated Sash Bars,Any Numbers, Edges Of Framing Plain,Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass,Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed. , Supply And Fix Solid Pre Lam Pvc Door Frame/Chowkhat Of Size 50 X 47Mm Made Out Of 5Mm Prelam Pvc Sheet Reinforced With M.S. Square Tube 15Mm X 15Mm. The Two Vertical Door Profiles Are To Be Reinforced With 40Mm X 20Mm Ms Tube 19 Guage. Door Frame Need To Be Fixed To Wall Using 100 Mm Long Ms Screws Etc Complete. , Supply And Fix Factory Made Solid Panel Pre Lam Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes 19 Guage Thickness And Size Of 40Mm X 20 Mm For Stiles, Top,Bottom And Lock Rails. M.S. Frame Shall Be Covered With Heat Moulded Prelam Pvc ‘C Channel Having A Pvc Sheet Strip Of 30Mm Width Stuck Inside With Solvent Cement. 110 Mm Width Forming Stiles In Which 100Mmm Should Be Flat And 5 Mm Should Be Tapered, And 5 Mm Thich, 135 Mm Wide Prelam Pvc Sheet For Top And Bottom Rail In Wchich 125 Should Be Flat And 5 Mm Should Be Tapered On Either Side Of Panel, Also For Lock Rail 145 Mm Sheet, 125 Should Be Flat And 5 Mm Tapered On Either Side. And Additional 5 Mm Thich Pvc Strip Struck Inside Of C Channel. And Prelam Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Prelam Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement Etc Complete , Supply And Fix 100 Mm Size Stainless Steel Butt Hinges, Complete All As Specified And As Directed. , Supply And Fix 200 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section Complete All As Specified And As Directed. , Supply And Fix 150 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section Complete All As Specified And As Directed. , Supply And Fix 150 Mm Extruded Aluminum Alloy Handles, Fabricated Type, Anodized Complete All As Specified And As Directed , Supply And Fix 300 Mm Long Aluminum Alloy Anodised Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Steel, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminum Alloy Complete All As Specified And As Directed. , Supply And Fix Stain-Less Steel Wire Cloth, 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40 Mm And Fixed With Stainless Wire Staples Complete All As Specified And As Directed. , Supply And Fix As In Repair Aluminium Extuded Section Body Door Closer Hydraulically Regulated, Designation No. 3,Universal Type, Suitable For Door Shutters Of 851 To 1000 Mm In Width And Of Weight Between 61 To 80 Kg Complete All As Specified. , Taking Down And Refixing Aluminium Window, Shutters And Making Unserviceable Shutter To Serviceable Shutter (Which Incls Replacing Roller,Rubber Beading Etc) Complete All As Specified And Directed. , Providing And Fixing Powder Coated Aluminium (Minimum Thicknesss Of Powder Coating 50 Micron) Work For Doors, Windows, Ventilators And Partitions (Fixed Portions) With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Confirming To Is-733 And Is- 1285, Fixed With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E At Top, Bottom And Sides With Required Epdm Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 105Mmx60mmx1.25Mm With Double Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified, Supplied And Fixed , Supply And Fix Pressed Steel Frames For Doors Of Size 125Mmx60mmx1.25Mm With Single Rebate Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified, Supplied And Fixed , Material And Labour For Structural Steel Work With Rolled Mild Steel Sections As In Main And Cross Beams, Hip And Jack Rafters, Trusses, Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Conforming To Fe-290 (Gde E-165) Quality A Complete All As Specified And Directed. , Supply And Fix Framed Work Such As Grills, Gratings, Etc.. With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.Gde-E-165 Complete All As Specified And Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Four (4) Coat Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Complete All As Specified And As Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Four (4) Coat Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified And As Directed Note: To Be Executed For Provison Of Ridges And Hips, Valley Etc Complete All As Specifed And As Directed , Supply And Fix Suspended False Ceiling Using E-Grid 2430, 180 Gsm (Exposed Ceiling Suspension System ) Of Grid Size 600Mmx600 Mm With Main Runner 32 Mm X 24 Mm And Wall Angle 24Mm X 24Mm Using 4Mm Thick High Pressure Stean Crude Everest Non Asbestos Fiber Cement Plain Board (E-Board Classic) In & Including A Grid Of Gi System Duly Suspended With 4Mm Dia Gi Wire Hanger Fixed With Steel Dash Fasteners Or Iron Purlin From The Roof With Adjustment Clip Providing Positions For Light Fixtures,Air Conditioning Diffuser And Ducts ,Sprinkler ,Smoke Detectors Etc.The Main Runners To Be Secured To Structural Soffits By Hanger @ 1220 Mm Maximum C/C. The Last Hanger At The End Of Each Main Runner Should Not Be Placed At More Than 450Mm From The Adjucent Wall,Flush Fitting 1220 Mm Cross Tee To Be Interlocked Between Main Runners @ 610Mm C/C,So As To Form 600Mm X 600 Mm Grid Complete All As Specified And Directed. , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 60 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Over And Including Screed Bed Of 15 Mm Thick In Cement Mortar (1:6) Complete All As Specified And Directed. , Supply And Fix For Exterior Grade, Coloured Glossy Finish Rubber Pressed, Cement Concrete Designer Chequered Tiles Of Size 300Mm X 300Mm X 25Mm Thick Set, Jointed And Pointed In Neat Cement Slurry With Grey Cement And Pigment To Match The Shade / Colour / Matrix Of Tiles Over And Including Screed Bed Of 15 Mm Thick In Cement Mortar (1:6) Complete All As Specified And Directed. Etc Complete All As Specified And Directed. , Material And Labour For Double Charged Vitrified Ceramic Tiles Light Shade 9 To 10Mm Thick (Square/Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm, Laid In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed In Cm 1:6 Complete All As Specified And As Directed. , Material And Labour For Double Charge Vitrified Ceramic Tiles, Light Shade, 9 To 10Mm Thick (Square/Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm,, In Skriting Dado Etc., Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Colour Of Tiles, Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed. , Material And Labour Non Skid Coloured Ceramic Tiles 7 To 8Mm Thick, (Square/Rectangular) Area Of Each Tiles Exc 0.06 Sqm But Not Exc 0.11 Sqm As In Floors Set And Jointed In Cement Slurry And Pointed In White Cement Mixed With Colour Pigment To Match Existing Surfaces With 15 Mm Thick Screed Bed In Cement Mortar (1:6) Including Dismantling Of Old Unserviceable Tiles Complete All As Specified And Directed. , Material And Labour For Glazed Light Coloured/Printed Ceramic Tiles 450X300x7mm Thick In Vertical Surfaces Such As Skirting, Dado Etc Set And Jointed In Neat Cement Slurry, Pointed In White Or Coloured Cement To Match Colour Of Tiles, Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed. , Material And Labour For Non Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square / Rectangular) Area Of Each Tiles Exc 0.18 Sqm But Not Exceeding 0.38 Sqm In Floor Etc Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match With Coloured Tiles Over 15Mm Thick Screed Bed In Cement Mortar 1:6 Complete All As Specified And Directed. , Material And Labour For Non Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square / Rectangular )Area Of Each Tiles Exc 0.18 Sqm But Not Exceeding 0.38 Sqm On Vertical Surfaces As Skirting Etc Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match With Coloured Tiles Over 10Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And Directed. , Material And Labour For 25 Mm Thick Plain Cement Concrete (1:2:4) Type B0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Floor Finished Rough To Receive Tiles Complete All As Specified And As Directed. , Material And Labour For 100Mm Thick Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate ) As.In Floor Finishing Even And Smooth With Out Using Extra Cement Complete All As Specified And As Directed , Material And Labour For 10Mm Thick Rendering On Other Than Fair Faces Of Brick Wall In Cm 1:6 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement With Using Wpc @3% By The Wt Of Cement. Wpc Shall Be Measured And Paid Seperately. , Supply Only Water Proofing Compound. , Material And Labour For Rendering 15 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surface Finsihed Even And Smooth (Without Using Extra Cement) Etc Complete All As Specified And As Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Wall And Applying A Coat Of Alkali Primer And Two Coats Of Acrylic Distemper Complete All As Specified And Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Walls And Applying Two Coat Of Acrylic Exterior Weather Coat Paint (Weather Proof Paint With Quality Of Dust Guard, Anti Algal And Anti Fungal Paint With Minimum 05 Years Performance Warranty, Make: Berger Weathercoat Anti Dustt Or Equivalent Of Asian Paint Or Nerolac) Over A Coat Of Approved Primer Over 1Mm Thick Water Proof Putty Of Same Manufacturer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Wall Surface And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. , Supply And Fix Sheet Glass 4.0 Mm Thick Ordinary Quality And Glazing With Oil Putty/ Wooden Beads/ Aluminium Window In Squares Not Exc. 1.00 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For Preparation Of New Or Previously Untreated Surface Of Wood Or Wood Based Materials Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer All As Specified. , Material And Labour For Preparation Of New Steel And Iron Surfaces Of Any Description, Over 10 Cm In Width Or Girth , Not Otherwise Described And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc Complete All As Specified And As Directed , Supply Hoisting And Fix 500 Ltrs Rotational Moulded Polythene Water Storage Water Tanks Twin Layered Construction ( Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Duly Isi Marked, 20Mm Gi Light Grade Over Flow Pipe Approx Length 1.5M Long, 20Mm Gi Medium Grade Pipe For Wash Out Approx Length 2.00 M Duly Plugged At One End Shall Be Provided Including Dismantling The Existing Tank Complete All As Specified. , Supply Hoisting And Fix 1000 Ltrs Rotational Moulded Polythene Water Storage Water Tanks Twin Layered Construction ( Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Duly Isi Marked, 20Mm Gi Light Grade Over Flow Pipe Approx Length 1.5M Long, 20Mm Gi Medium Grade Pipe For Wash Out Approx Length 2.00 M Duly Plugged At One End Shall Be Provided Including Dismantling The Existing Tank Complete All As Specified.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Assam View Result →
2.
Defence #11392755 Technical Bid
Tender for Material And Labour For Plain Cement Concrete 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundation ,Filling And Mass Concrete Complete All As Specified And Directed . , Material And Labour For Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate) As In Cills, Steps; Seismic And Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets And Railings Upto 60 Cm In Height, Copings, Kneelers, Apex Stones, Bed Plates, Kerbs Not Provided For, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating Etc , Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete 1:3:6 Type C-1 Using (20Mm Graded Stone Aggregate) As In Bed Blocks For Hold Fast,Coping Errection Of Posts Etc Complete All As Specified And Directed. , Material And Labour Reinforced Cement Concrete Nominal Mix (1:1.5:3) Type A1 (Using 20Mm Graded Stone Aggregate) On Slabs Supported On Walls , Beams And Columns In Floors , Roofs,Landings,Balconies, Canopies Deck Slabs, And In Shelves And The Like Complete All As Specified And As Directed. , Material And Labour Reinforced Cement Concrete Nominal Mix (1:1.5:3) Type A1 (Using 20Mm Graded Stone Aggregate) Chajja, Facia Etc And The Like Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete 1:3:6 Type C0 (Using 12.5Mm Graded Stone Aggregate) As In Filling The Hollow Portion Of Steel Frame Complete All As Specified And Directed. , Supply Only Water Proofing Compound. , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cm 1:4 Complete All As Specifed And Directed. , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc To Any Radius In Half Brick Thick Walls Built In Built In Cm 1:4 Complete All As Specifed And Directed , Material And Labour For Form Work On Flat Sides To Soffits Of Suspended Roof Slabs Not Exc 200 Mm Thick (Horizontal Or Sloping), Walls , Beams And Columns In Floors,Landings,Balconies, Canopies Deck Slabs, And In Shelves Rough Finished Surface Of Concrete All As Specified And As Directed. , Material And Labour For Form Work On Flat Sides To Chajja, Fins, Louvers, Fascia Etc Rough Finished Surface Of Concrete All As Specified And As Directed. , Refixing Wooden Or Aluminium Door Shutters Of Any Description Exceeding 1 Sqm But Not Exceeding 2 Sqm Each In The Same Opening After Taking Down, Easing And Adjusting Including Refixing Builders Hardware, Glass Etc As Required And Renewal Of Unserviceable Screws Concrete All As Specified And As Directed. , Supply And Fix For 2Nd Class Hardwood Plain, Solid, Straight Chowkhats And Frames, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue, Pinned At Joints Complete All As Specified And Directed. , Supply And Fix Factory Made 30 Mm Thick Flush Shutter Solid Core Construction With Block Board Core & Plywood Face Panels Commercial Type On Both Sides Incl 5Mm Thick Teakwood Leaping Alround Complete All As Specified And Directed. , Supply And Fix 2Nd Class Hardwood Factory Made Door, 35 Mm Thick, Glazed And Skeleton Shutters, Open Rebated And Prepated To Receive Glass Gauze Etc (With Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Materials And Revated Sash Bars Any Number , Edges Of Framing Plain Chemfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass In Door Etc Or Provided With Styles And Rails As Specified In Ssr Part 1 Section 8, Clause 8.20 (A) Complete All As Specified And Directed. , Supply And Fix 2Nd Class Hardwood Glazed And Skeleton Window Shutter 30Mm Thick, Divided Into Squares, With Plain, Chamfered Or Rounded, Mitred And Rebated Sash Bars, Any Numbers, To Receive Glass, Gauze, Etc Or Provided With Styles And Rails As Specified In Ssr Part 1 Section 8, Clause 8.20 (B) Complete All As Specified And Directed. , Supply And Fix Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed , Supply And Fix Factory Made Solid Panel Pvc Door Shutter 30Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails, M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc C Channel Heaving A Pvc Sheet Strip Of 20Mm Width Suck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S Frame Wedded/ Sealed To The Stiles, & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Supplying & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed , Supply And Fix Stainless Steel Wire Cloth 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Stapple Etc Concrete All As Specified And As Directed. , Supply And Fix 300Mm Long Aluminium Alloy Anodised , Plate Type ,Stove Enameled Black , With Bright Bolt Not Less Than 12Mm Dia With And Incl Minimum Of 6 Bolts And Nuts ,Four On Bolt Plate And Two On Staple Concrete All As Specified And As Directed. , Supply And Fix Stainless Steel Butt Hinges Cold Rolled Meium Weight Of Size 100Mm Etc Complete All As Specified And Directed. , Supply And Fix Stainless Steel Butt Hinges Cold Rolled Meium Weight Of Size 75Mm Etc Complete All As Specified And Directed. , Supply And Fix Aluminium Alloy Handles 150 Mm Long Fabricated Type Complete All As Specified And Directed. , Supply And Fix Aluminium Alloy Handles 100 Mm Long Fabricated Type Complete All As Specified And Directed. , Supply And Fix Aluminium Anodised Barrel Tower Bolts Of Extruded Section 200 Mm Long Complete All As Specified And Directed. , Supply And Fix Aluminium Anodised Barrel Tower Bolts Of Extruded Section 150 Mm Long Complete All As Specified And Directed. , Supply And Fix 300Mm Long Aluminium Alloy Anodised Sliding Door Bolts , With Hasp Staple (Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast-Aluminium Ally Complete All As Specified And Directed. , Supply And Fix Powder Coated Three Track Aluminium Sliding Window With Approved Make Of Following Extruded Section Of Anodised Glazed Shutter As Per Standard Engineering Practices Including All Other Accessories Complete Including 4.00 Mm Thick Tinted Glass Panes, Rubber Beading, Mosquito Proofing, Locking System Etc. Complete All As Specified And As Directed. (Refer Jindal Cat M-2014 ) Aluminium Sections : A Series (I) Shutter Bottom & Top :- 37.50 X 15 X 1.3 Mm Thick (20690) (Ii) Shutter Interlock :- 37.50 X 23 X 1.3 Mm Thick (20689) (Iii) Shutter Side (Handle) :- 37.50 X 23 X 1.3 Mm Thick (20689) (Iv) Frame Bottom :- 75 X 26 X 1 Mm Thick (20671) (V) Frame Top And Sides :- 75 X 26 X 1 Mm Thick (20672) , Supply And Fix Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) Or Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/Neoprene Gasket Required (Fittings Shall Be Paid For Separately) With Extruded Built Up Standard Tubular Material And Labour Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling, C.P. Brass/ Stainless Steel Screws All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge , Material And Labour For Structural Steel Work With Rolled Mild Steel Sections As In Main And Cross Beams, Hip And Jack Rafters, Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Conforming To Fe-290 (Gde E-165) Quality A Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 125Mmx60mmx1.25Mm With Double Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc.Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 105Mmx60mmx1.25Mm With Single Rebate Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc.,Complete All As Specified And Directed. , Material And Labour For Mild Steel Conforming To Fe 410-0 Or Fe 310-0 In Framed Work Such As Grills, Gratings, Etc With Ends Of Bars Shouldered And/Or Riveted Or Forged Into Spikes; Framed Guard Bars; Ladders; Railings And Similar Work Complete All As Specified And Directed. , Supply And Fix Box Type Steel Windows With Side Hung Shutters Both Mosquito Proof And Glazed Shutter Including Projecting Type Hinges With Steel Handle And Steel Peg Stay With Glazing Bars And 12 Mm Square Bar Or Ground Bar Of Approved Design Welded To Steel Window Frame Dovetailed Or Welded Complete All As Specified And As Directed. , Supply And Fix Steel Ventilators With Top Hung Shutter Including Hinges, Steel Peg Stay, Complete All As Specified And As Directed. , Material And Labour For Mild Steel Tmt Bars 10 Mm Dia And Over Cut To Length, Bent To Shape As Required Including Cranking, Bending And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia As In Reinforcement Bar Complete All As Specified And As Directed. , Repairing Of Existing Mild Steel Rolling Shutter Of Any Description Or Any Size Including Replacement Of Damaged Mild Steel Laths, Repairing/ Replacement Of Side Guide Channels, Pipe Shaft, Springs, Ball Bearings, Locking Arrangements, Welding Work, Alingment And Smooth Operation, Including Necessary Nuts, Bolts, Oiling And Greasing, Complete All As Specified And As Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Atmospheric Classification Category 3,Four (4) Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified And As Directed , Material And Labour For Pre- Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Plain Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Pattern Corresponding To Is 15965 : 2012 Of Durability Class 3, Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Having Yield Strength Of 550 Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified Complete All As Specified And As Directed. Note: To Be Executed For Provision Of Ridges And Hips. , Material And Labour For 12 Mm Thick Prelaminated Particle Board Bwp Type Melamine Finished (Both Side) For Fixing The Panel Of The Partition/Door Including Necessary Fittings, Gusket, Angle Cleats, Screw Etc Complete All As Specified And Directed. , Supply And Fix Suspended False Ceiling Using E-Grid 2430, 180 Gsm (Exposed Ceiling Suspension System ) Of Grid Size 600Mmx600 Mm With Main Runner 32 Mm X 24 Mm And Wall Angle 24Mm X 24Mm Using 4Mm Thick High Pressure Stean Crude Everest Non Asbestos Fiber Cement Plain Board (E-Board Classic) In & Including A Grid Of Gi System Duly Suspended With 4Mm Dia Gi Wire Hanger Fixed With Steel Dash Fasteners Or Iron Purlin From The Roof With Adjustment Clip Providing Positions For Light Fixtures,Air Conditioning Diffuser And Ducts ,Sprinkler ,Smoke Detectors Etc.The Main Runners To Be Secured To Structural Soffits By Hanger @ 1220 Mm Maximum C/C. The Last Hanger At The End Of Each Main Runner Should Not Be Placed At More Than 450Mm From The Adjucent Wall,Flush Fitting 1220 Mm Cross Tee To Be Interlocked Between Main Runners @ 610Mm C/C,So As To Form 600Mm X 600 Mm Grid Complete All As Specified And Directed. , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Over And Including Screed Bed Of 15 Mm Thick In Cement Mortar (1:4) Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm Thick, In Floor, Shelves Etc, Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Shade Of Tiles Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:4 Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 7 To 8Mm Thick Area Of Each Tile Exceeding 0.18 And N.Exc 0.38 Sqm In Floor, Shelves Etc, Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Shade Of Tiles Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:4 Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Exc 0.18 And N.Exc 0.38 Sqm , In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Including 10Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. , Material And Labour For Coloured/ Printed Glazed Ceramic Tiles 7Mm Thick Not Exc 0.15 Sqm In Area In Vertical Surfaces I.E. Dado, Skirting, Etc., Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match The Tiles, Laid Over And Including Screed Or Screed Bed 10Mm Thick In Cement Mortar 1:4, Complete All As Specified And As Directed. , Material And Labour For 75Mm Thick Cement Concrete 1:3:6 Type C-2 (Using 40Mm Graded Stone Aggregate ) As In Plinth Protection Complete All As Specified And Directed. , Material And Labour For 100Mm Thick Cement Concrete 1:2:4 Type B-2 (Using 40Mm Graded Stone Aggregate) As In Flooring, Hardstanding Complete All As Specified And Directed. , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And Directed. , Material And Labour For 25 Mm Thick Plain Cement Concrete (1:2:4) Type B0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Floor Finished Rough To Receive Tiles Complete All As Specified And As Directed. , Material And Labour For 10Mm Thick Rendering On Other Than Fair Faces Of Brick Wall In Cm 1:6 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement With Using Wpc @3% By The Wt Of Cement. Wpc Shall Be Measured And Paid Seperately. , Material And Labour For 5Mm Thick Rendering On Fair Faces Of Brick Or Concrete Surface In Cm 1:3 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surface Of Wall And Applying A Coat Of Alkali Primer And Two Coats Of Acrylic Distemper Complete All As Specified And Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Walls And Applying Two Coat Of Acrylic Exterior Weather Coat Paint (Weather Proof Paint With Quality Of Dust Guard, Anti Algal And Anti Fungal Paint With Minimum 05 Years Performance Warranty, Over A Coat Of Approved Primer Over 1Mm Thick Water Proof Putty Of Same Manufacturer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Wall Surface And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Ceiling Surface And Applying Three Coats Of White Wash Complete All As Specified And Directed. , Material And Labour For 4Mm Thick Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square N-Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For 4Mm Thick Sheet Glass Figured Glass, Pin Head Type And Glazing With Oil Putty In Square N-Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For Preparation And Applying Two Coats Of Synthetic Enamel Paint On New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Over A Coat Of Pink Primer Complete All As Specified And Directed. , Material And Labour For Preparation Of Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide On New Steel Surfaces , Over 10 Cm In Width Or Grith Not Other Wise Described Complete All As Specified And Directed. , Supply And Fix Steel Water Tubes, Medium Grade, Isi Marked, Galvanised, 15Mm Bore With All Fittings, Fixed To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , Supply And Fix Steel Water Tubes, Medium Grade, Isi Marked, Galvanised, 20 Mm Bore With All Fittings, Fixed To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , Supply And Fix In Repair Vitreous China Wash Hand Basin White, Flat Back Of Size 550Mmx400mm Fixed On And Including Cast Iron Cantilever Bracket, 32Mm Dia Pvc Waste Coupling And 32 Mm Dia Pvc Waste Pipe Including Fixing Of Tap, Waste Fitting Etc Complete All As Specified And Directed. , Supply And Fix In Repair Bib Taps With Wall Flange 15Mm Bore, Fancy Type, Quarter/Half Turn, Brass Chromium Plated, Long Body With Capstan Head And Cup Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Including Accessories Complete All As Specified And Directed. , Supply And Fix In Repair 125 Mm Dia, Chromium Plated Swivel Type Shower Rose With 195 Mm Long Chromium Plated Shower Arm And Wall Flange Suitable For Fixing 15Mm Bore Iron Pipe All As Specified And Directed , Supply And Fix In Repair Bath Wall Mixer With 15Mm Bore (Dia) Spout, Chromium Plated With Long Bend Pipe For Over Head Shower Including Flanges Complete All As Specified And As Directed. , Supply And Fix In Repair Pillar Taps, Cast Copper Alloy, With Capstan Heads, Fancy Type, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered ‘Hot Or ‘Cold With Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe 15 Mm Bore Complete All As Specified And Directed. , Supply And Fix In Repair Cp Stop Valve/Angle Valve 15 Mm Bore, Fancy Type Cromimum Plated With Long Shank And Cup (Concealed Type), High Pressure Crutch Or Butter Fly Handle Screwed Both Ends Screwed For Iron Pipe Or For Unions Complete All As Specified And Directed. , Supply And Fix In Repair Rotational Moulded,Multilayer Hdpe Water Storage Tank Of 1000 Ltrs Capacity(Cylindrical Vertical With Closed Top) Isi Marked Fixed In Position On Existing Places With Fittings And Refixing Of Inlet, Outlet & Overflow Pipe Etc, Complete All As Specified And As Directed. , Supply And Fix In Repair Rotational Moulded,Multilayer Hdpe Water Storage Tank Of 500 Ltrs Capacity(Cylindrical Vertical With Closed Top) Isi Marked Fixed In Position On Existing Places Complete And Refixing Of Inlet, Outlet & Overflow Pipe Etc, Complete All As Specified And As Directed. , Supply And Fix Ball Valves 20Mm Bore Dia Of Pipe High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed (Minimum Weight 20Mm-210Gms). , Supply And Fix In Repair 600Mmx450mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers , Supply And Fix In Repair Pvc Valve, Symphonic Action Type, Flushing Cistern 10 Liters Capacity Low Level White With Inlet ,Ball Valve ,Float And Handle Including Brocket Complete All As Specified And As Directed. , Supply And Fix 110Mm Dia Pvc (Swr) Pipes, Presure Rate Having 6 Kgf Single Socketed In Any Length With Rubber Ring Joints And Laid In Trenches As In Waste/Soil Pipe Complete All As Specified And As Directed. , Supply And Fix 110Mm Dia Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Walls Complete All As Specified And As Directed. , Supply And Fix 75Mm Dia Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Walls Or Floor Complete All As Specified And As Directed. , Supply And Fix Pvc (Swr) Bends With Access Door Any Radius, 75 Mm Bore Complete. , Supply And Fix Pvc (Swr) Bends With Access Door Any Radius, 110 Mm Bore Complete. , Supply And Fix, In Repair Vitreous China Wash Down Water Closet Of Orissa Pattern Size 580 X 440 Mm White With Integral Foot Rests Including Removing Filled Lean Concrete From Sunken Portion And Putting Of Lean Concrete After Treatment Of Sunken Slab, Connection To Trap And To Flushing Pipe Etc Complete And Making Good To Floor Complete All As Specified And Directed. , Supply And Fix In Repair Vitreous China Wash Down Water Closed Pan (Pedestal Pattern) With P Or S Trap White, Including Connection To Trap And Cistern, Flush Pipe Including White Plastic Water Closet Seat Cover, Closed Pattern With Flat Bottom & Cover And Aluminium Anodised Hinging Device And Making Good Disturbed Surface Of Floor Complete All As Specified And Directed. , Supply And Fix In Repair Plastic Water Closet Seat Cover, White, Closed Pattern With Flat Bottom & Cover And Aluminium Anodised Hinging Device And Fixed Wc Pan Complete All As Specified And Directed. , Dismantling Plain Or Corrugated Steel Sheeting Any Gauge Thickness Including Nanital Or Similar Pattern Roof Covering , Taking Up Or Down 20 Mm Bore Steel Water Tubing And Connections Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Water Tubing And Connections Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed. , Taking Down Door Chowkhat With Shutter Area N-Exc 1.5 Sqm Each(Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , Taking Down Chowkhats Or Frames With Shutters Exc 1.5 Sqm But Not Exc 4 Sqm Each (Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , Taking Down Shutters Of Wooden Or Aluminium Door Of Any Description N. Exc 1 Sqm Each Complete All As Specified And Directed. , Taking Down Shutters Of Wooden Or Aluminium Door Any Description Area Exc 1 Sqm And N Exc 2 Sqm Each Complete All As Specified And Directed. , Dismantling Wall And Ceiling Boards Or Insulation Boards, Any Thickness, Any Description, Including Cover Fillets Complete All As Specified And Directed. , Demolition Of Reinforced Cement Concrete (Reinforcement Cut As Required To Facilitate Demolition) Of Any Description And In Any Position Not Otherwise Specifically Provided For Complete All As Specified And As Directed. , Taking Down Cement Plaster Of Any Description On Brick Or Stone Walls Etc Including Racking Out Joints Hacking For Key Scrubbing Down With Water Etc Complete All As Specified And Directed. , Demolition Of Brick Work Built In Cement Mortar Or Cement Lime Mortar , Dismantling Structural Steel Work Including Doors, Gates But Excluding Framed Trusses Etc Complete All As Specified. , Demolition Of Stone Slabs And Tiles Laid Dry And Dry Or Pointed Of Any Description Or Thickness Infloors, Aprons Etc. , Dismantling, Floor Hearth Or Wall Tiling Inclduing Cement Mortar Bedding And Removing Rubbish Off The Premises Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc. 15 Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed. , Demolition And Breaking Up Drain Waste Pipes (Sgsw, Ac Or Rcc, Ci ) Of Internal Dia 75/110 Mm, Set In Cement Mortar In Any Position Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Assam View Result →
3.
Tourism #11346896 AOC
Bids Are Invited For 1 Headwall /Endwall Platform For Podium, Those Platform Suitable For Swimming Pool With Water Recirculation In Four Sides. It Is Composed Of An Aisi 304 Stainless Steel Frame And Plastic Grating, Grating Should Be Made Of Polypropylene Composite To Resist Uv Rays And Chemical Products Present In The Water, The Grating Should Have Free Space Of Over 45% To Facilitate Water Recirculation, Platform Can Be Used As Turning Panel And Iy Should Include Anchors For Mounting And For Starting Blocks, Width - 2.5 M. Make - Aqvastar / Astralpool/ Anti 2 Starting Blocks With Mounting Frames And Foundation Bolts - The Starting Block Is Manufactured Using Aisi-316L Painted With Epoxy Resins Or Polished And Dip Of Plate Size 500 X 700 Mm. Hight Density Polyethylene With No-Slip Machining Top Platform, Adjustablem Angle Of Diving Platform Surface Max 10°. Double Handle Horizontal And Vertical For Backstroke Start. The Starting Block Is Provided To Numbers Standard In 4 Sides. Made In According With Fina Regulation In Force. Make - Aqvastar / Depatech/ Anti 3 Float Lane - 150 Mm Dia. Anti Wave Breaker Lane Ropes Made Made In Polyethylene With Anti-Acid And Anti Uva Treatments With Special Feature For Eliminate Wave Movement. Complete With Spring Tensioner All In Stainless Steel 316L And Cover In Silicon, In According With En 13451-5 And Fina Regulation In Force. Suitable For High Level Competitions Including Ss 316L Float Line Fixing Post Anchored On The Deck. Make - Aqvastar / Depatech/ Anti 4 S.S. Float Lane Storage Designed To Transport And Store The Float Line After Use In The Swimming Pool. Easy To Use And Aesthetically Discreet. The Float Line Roller Is Manufactured Using Aisi-304 Stainless Steel And Includes A Pvc Bag For Collecting Excess Water From The Float Lines. BagS Lower Outlets, It Is Emptied In A Controlled Manner With No Water Spillage. The Cart Has Four Rotating Wheels For Maximum Mobility. Two Of These Have A Brake. Suitable For Storage Of 1 No. Of 50 M Long 150 Mm Dia. Float Lane. Make - Aqvastar / Depatech/ Anti 5 False Start Indicator Post- Comprising Of 2 Nos. Stainless Steel 316L Posts Each Of 48 Mm Dia And 1.8 M Height Provided On Either Side Of The Racing Pool Properly Anchored In A Suitable Anchoring Socket On The Deck At Specified Location Including One Post Provided With Pulley And Quick Cord Fixing And Loosening Device And Including False Start Line Comprising Of Polyester Cord And A Float. As Per Fina. Make - Aqvastar / Depatech/ Anti 6 D) Back Stroke Turn Indicator Post - Comprising Of 2 No Stainless Steel Ss 316L Posts Each Of 48 Mm Dia And 1.8 M Height Provided On Either Side Of The Racing Pool Properly Anchored In A Suitable Anchoring Socket On The Deck At Specified Location And Shall Span Across The Sides Including Set Of Flags As Per Specifications As Per Fina. Make - Aqvastar / Depatech/ Anti 7 Water Polo Goal Post, The Water Polo Goal Post Should Be Lightweight, Floating And Very Resistant. It Is Built Entirely From Aluminium And Is Ovenpainted White. Manufacturing And Measurements In Accordance With Fina International Swimming Federation Standards, Floating: Polyurethane Foam-Filled Aluminium Floats, Goal Frame: Aluminium Tube, Net Fastening: Stainless Steel Round Rod, Net Side Pipe: Stainless Steel Round Pipe With Fastening In Frame And Float, Fastening For Goal Lines, Nets Included. Made In According With Fina Regulation In Force. Make - Aqvastar / Depatech/ Anti 8 Maxiflex B Diving Spring Board: The 16’ Maxi-B Is Basically A Onepiece Ribbed Extrusion Of Aluminum Alloy 6070-T6, Heat Treated For Yield Strength Of 50,000 Psi. It Has A Torsion-Box Extrusion, An Anchor Angle, And Tip End Cap Riveted To The Basic Section. It Is Tapered From The Fulcrum Area To The Diving Tip, And It Is Tapered From The Fulcrum Area To The Anchor End. The Double-Taper Allows The Whole Board To Arc While Flexing, Giving It Approximately 15% More Lift Than The 16’ Duraflex. The Anchor Bolts Are Reinforced Underneath By U Shaped Aluminum Pieces: Maxi-Bolting Extrusions. What Distinguishes The Maxi-B From The Other Models Is That The Diving Tip Has 189 Slots In The Metal Of The Top “Skin” Which Reduces The Weight Of The Tip-End. Make - Duraflex 9 Diving Board Short Stand Without Handrail: The Diving Stand Anchor And Fulcrum Assembly Shall Be Durafirm, Short Stand Designed For Mounting On A Concrete, Steel, Or Other Field-Fabricated Diving Platform. The Diving Stand Shall Consist Of Heavy Aluminum Castings Coated With Epoxy. The Roller Tube And Tracks Shall Be Heat Treated Extruded Aluminum, Hard Anodized. The Bearings For The Roller Tube And Slide Shall Be Nylon With Grease Path. The Diving Board Anchor Hinges Shall Be Heat Treated Aluminum Forgings With A Design Tensile Strength Of 35,000 Psi And Shall Be Hard Anodized. The Diving Board Anchor Bolts Shall Be 5/8 Diameter By 3 1/2 Long Silicon Bronze. The Diving Stand Shall Be Supplied (Without Guard Rails), (With Top And Intermediate Guard Rails On Two Sides), Top Guard Rail Only On Two Sides), (Top Guard Rail On One Side Only). The Diving Stand Guard Rails Shall Be Stainless Steel Tubing, Firmly Attached To The Guard Rail Supports With Stainless Steel Band Fasteners. The Rails Shall Be Extended To The Edge Of The Swimming Pool And The Rail Ends Shall Be Fitted With Safety Tips. The Stand Shall Be Designed For Mounting On New Concrete Platforms With The Use Of Six Durafirm, Catalog #70-231-900 Bronze Deck Anchors. Make - Duraflex Total Quantity : 88
Contract Date: Ref. Documents Contract Value : ₹ 1.74 Crore
Government Departments No of Bidders 3
Goa View Result →
4.
Rural Development #11324361 Price Bid
Tender For Constructing Anganwadi Building At Karunj Tal.Maval - Part - AExcavationforfoundationinearth,soilofalltypes,sand,gravelandsoftmurum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthe buildingareaand stackingandspreadingasdirected,dewatering,preparingthebed forthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 2 Excavationforfoundationinhardmurum includingremovingtheexcavatedmaterial upto distanceof50metresbeyondthebuildingareaandstackingandspreadingas directed,dewatering, preparing the bed for the foundation and necessary back filling,ramming, wateringincludingshoringandstruttingetc.complete.(Liftupto 1.50m)ByMechanical Means 3 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Non SCADA Item) 4 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Non SCADA Item) 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Concrete Non Scada) 6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Non SCADA Item) 7 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Non SCADA Item) 8 Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.Withfineaggregate (Crushed sand VSI Grade)(Concrete Non Scada) 9 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 10 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete 11 Fillinginplinthandfloorswith approved excavatedmaterialin15cm.to20cm.Layers including watering and compacting etc. complete. 12 Filling in plinth and floors with contractorsmaterial/brought from outside and approved byEngineer inchargein layers of 15 cmto 20 cm including watering andcompactionetc. complete. 13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 14 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diaMetre / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc complete 15 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete 16 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. 17 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 18 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. 19 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. 20 Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 21 Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 22 Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. 23 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. 24 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete 25 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete. 26 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium platedfixturesandfastenings,withbrassmortiselock,chromiumplated handlesonboth sides, and finishing with French Polish etc. complete. 27 Providing andfixing inposition(asper1868/1982)Aluminium sliding windowof three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre.Theshuttershouldbeof bearingbottom40x18x1.25mmat weight 0.417Kilogram/One Running Metre. Inter locking section 40x 18x 1.10mm atweight 0.469Kilogram/Running metre. andhandleandtopsection40x18x1.25mm atweight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fittedin vertical section of shutter including 5 mmthickplainglassandaluminiummosquitonetshutterwithstainless steeljailwithall required screws and nuts etc, complete. With powder coating without box 28 Providing and fixing in position powder coated aluminium louvered windows / ventilator ofvarious sizes with powder coating as per detailed drawing and specifications including aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheet glasslouvers,of approved quality etc. complete. 29 Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizesincludinghold fast hinges,tiememberswith red oxide and gray paintetc. completeas perI.S.I. specifications and code of practice prescribed including anticorrosivetreatmentas directed by the engineer. 30 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metreasperdrawingincludingfixturesnecessaryweldingandpaintingwith onecoatof anticorrosive paint and two coats of oil painting complete. 31 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. 32 ProvidingandfixingwhiteglazedearthenwareWashHandBasinof55cm.x40 cm. sizeincludingcoldwaterpillartap/coldandhotwaterpillartapbrackets,rubber plugsandbrasschain,stoptapandnecessary pipeconnectionsincludingP.V.C.waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testingetc. complete. 33 Providing and constructing Brick MasonryInspection Chamber 60cm x 45cm x 90cmincluding 1:4:8 cement concrete foundation 1:2:4 cement concrete channels halfround G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. 34 Providingsoakpitofsize 120cm x120cm x120cmincluding excavatingandfilling with brick-bats. 35 Providing, laying andfixing P.V.C. pipe of 110mm. dia. withfittingssuch as bends, tees,reducers,clamps,etc.includingnecessary excavation,trenchfillingetc.complete. Including removingexistingpipelineifnecessaryandconveyingandstackingthe sameinPWD chowky or as directed etc. complete. 36 ProvidingandfixingOrissatypewhiteglazedearthenware575mmwatercloset pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside faceofthewall1:2:4brickbatlimeconcretebeddingwithoutflushingtankanditsaccessories etc. complete. 37 ProvidingandfixingH.D.Pcontaineronepiecemouldedwatertankmadeoutofhigh density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tankscapacity between 200 to 1000 liters 38 Providingandfixingonwalls/ceiling/floor15mmdia.CPVCpipewithnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete. 39 Providingandfixingonwalls/ceiling/floor25mmdia.CPVCpipewithnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 40 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. 41 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaningoil,grease,dirtandotherforeignmatterandsandpaperingasrequiredetc.complete. 42 Providing and applying two coats of exteriorweather shield paint of approved manufactureand of approved colour to the plastered surfaces including cleaning,preparing the plastersurface,applyingprimercoat,scaffoldingifnecessary,and watering the surface for two days etccomplete. NOTE: ForItem One Number 15 to 18 prior approval of Superintending Engineer will be necessary 43 Providing and applying washable oil-bound distemper of approvedcolour andshade to oldand new surfacesintwocoatsincludingscaffolding,preparingthesurfaces.(excluding the primer coat.) etc. complete. 44 Providing and fixing board displaying information, such as Name of work, Tender cost,Name of Contractor, Work completion and liability period etc, having rectangular shapeof 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted withone coat of Zinc chromate stoving primer and two coats of enamel paint on front side andgrey stove enamel on back side and border / messages / symbols etc. with approved colourshade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly crossbraced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angleiron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black andwhite bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling,transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge 45 Part - BMORTOR. 1)Compressive Strength.( Set of 3 Cubes) 46 STEEL BAR TESTING.2)Above 16 mm (Set of 3 Bars)(Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter,Bend / Rebend Test, Proof Stress.) 47 Royalty For Natural Sand - Screened (for plaster work only) 48 Royalty For Soft Murum
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
5.
Petroleum and Natural Gas #11322090 AOC
Bids Are invited for Custom Bid For Services - Construction Of Compressor Shed With Associated Civil And Electrical Works For Operation Of Two Nos Screw Type Air Compressor At Ihb Mithirohar Pumping Station In Gujarat - Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas Including Dressing Of Sides And Ramming Of Bottoms Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil, All Works Up To Any Lead And Lift, As Directed By The Engineer-In Charge : In All Kinds Of Soil. , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of The Engineer-In-Charge. [Notes: (1) Dismantling Shall Be Allowed During Day Shift Only & Prior Permission For The Same Shall Be Obtained. (2) Providing Of Necessary Covers/ Barricades Around The Work Area Shall Be Done Prior To Dismantling Operations.]Nominal Concrete 1:4:8 Or Leaner Mix. , Supplying & Fixing Welded Wire Mesh Door Made From Steel Wire Fabric Of Rectangular Mesh 75 X 25 Mm Size, Weight Not Less Than 7.75 Kg/Sqm Fixed On Angle Iron Frame By Welding, Fixing Of Holdfast, Hinges, Door Handles, Tower Bolts, Aldrops (2 Nos.), Wheels, Painting With Two Coats Of Synthetic Enamel Paint Of Over A Coat Of Red Oxide Zinc Chrome Primer, Excluding Frame Etc. Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications And Directions Of The Engineer-In-Charge. (Note: Angle Iron Frame Shall Be Paid Separately). , Providing And Laying In Position Cement Concrete Of Specified Grade Including The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cementconcrete For Reinforced Cement Concrete Work;Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources,Portland Pozzolana /Ordinary Portland/Portland Slag Cement,Admixtures In Recommended Proportions As Per Is:9103 To Accelerate /Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength;Including Pumping Of Concrete To Site Of Laying, The Cost Of Centering, Shuttering,Finishing, Curing,Carriage For All Leads,As Per Direction Of The Engineer-In-Charge,For The Following Grades Of Concrete.:Note: 1. Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. Incase The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bearthe Cost Of Extracement. 2.Payment For Reinforcement Shall Be Made As Per Relevant Item Of Sor. ;All Works Upto Plinth Level ; Concrete Of M30 Grade With Minimum Cement Content Of 350 Kg /Cum , Supplying, Cutting,Bending, Hoisting,Placing In Position Withproper Pre-Castconcrete Block Coverand Binding By Pvc Coated (Extrusion Process) 18 Guage Swgwire, High Yield Strengthdeformed Bars Of Grade Fe500 Conforming To Is:1786 With Protectivefusion Epoxy Coating Asper Is:13620 For All R.C.C Works Including All Necessary Handling At All Heights And Depths Complete In All Respects As Per Specifications And Directions Of The Engineer-In-Charge. , Brick Work With Common Burnt Clay F.P.S. (Non Modular)Bricks Of Class Designation 7.5 Infoundation And Plinth In : Cement Mortar 1:6 (1Cement : 6 Coarse Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brickwall Of Mix : 1:6 (1 Cement : 6 Fine Sand) , 6 Mm Cement Plaster Of Mix 1:3 (1 Cement : 3 Fine Sand) , Supplying, Fabricating, Erecting, Placing And Fixing In Position M.S. Structural Works Using Rolled/ Built Up Sections For Truss, Claddings, Bracings, Purlins, Supporting Frames Made Of Joists, Tubes, Pipes, Channels, Angles, Plates, Flats, Bars Etc. Including Cutting To Required Size Welding Of Joints, Fixing Anchor Plates, Including Bolts, Theading, Nuts, Washers, Sleeves Etc. Including Preparation Of Detailed Fabrication Drawings & Submission To The Engineer-In-Charge For Approval Before Start Of Fabrication, Supplying & Applying Painting With Two Coats Of Epoxy Paint Epilux 155 High Build Enamel Over A Coat Of Epilux 610 Primer Of M/S Berger Or Any Other Approved Equivalent Make As Per Manufacturers Recommendation, Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications And Directions Of The Engineer-In-Charge. (Excluding The Cost Of Concrete Work). , Providing And Laying 52 Mm Thick Cement Concrete Flooring With Metallic Hardner, Under Layer Of 37 Mm Thick Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) And Top Layer Of 15 Mm Thick Metallic Concrete Hardner Consis Ting Of Mix 1:2 (1 Cement : 2 Stone Aggregate 6 Mm Nominal Size) By Volume With Which Metallic Hardening Compound Such As Ironite No . 1 Of Ironite Co. Of India Ltd. Or Aproved Equivalent Mixed In The Ratio 4:1 (4 Parts Of Cement : 1 Part Of Metallic Floor Hardenin G Compound Of Approval Quality) By Weight, Inclusive Of Cost Of Finishing, Labour, Material, Equipment, Etc. As Per Specifications A Nd Directions Of The Engineer-In-Charge. , Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) : 6 Graded Stone Aggregate 40 Mm Nominal Size) , Supplying And Layingflat Brick Soling Infoundation Trench, Infloors, Garages, Sumps,Etc., With Bricks Of Classdesignation 50 Laid Toproper Slope, Level Andgrade Etc. Filling Of Thejoints With Sand Etc.Complete In All Respectsinclusive Of Cost Of Alllabour, Materials, Tools,Tackles Etc. As Perdrawings, Specificationsand Directions Of Theengineer-
Contract Date: Ref. Documents Contract Value : ₹ 24.99 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Gujarat View Result →
6.
Educational and Research Institute #11307517 Technical Bid
Tender For Ambedkar Gramam Project For Sc Unnathy Pookkunnimala- 1 1) Anganwadi-Civil Works-Ground Floor 2 15.9.2 Demolishing Stone Rubble Masonry Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer -In- Charges:In Cement Mortar 3 15.7.4 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar 4 15.2.2 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In-Charge.Nominal Concrete 1:4:8 Or Leaner Mix ( Including Equivalent Design Mix) 5 15.19 Dismantling Steel Work Manually / By Mechanical Means In Built Up Sections Without Dismembering And Stacking Within 50 Metres Lead As Per Directions Of Engineer -In- Charge. 6 15.28.1 Dismantling Roofing Including Ridges, Hips, Velleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of :G.S. Sheet 7 15.13.1 Taking Out Doors, Windows And Clerestory Window Shutters (Steel Or Wood ) Including Stacking Within 50 Metres Lead:Of Area 3 Sq. Metres And Below 8 2.6.1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge.All Kinds Of Soil 9 4.1.8 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) 10 5.9.1 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Foundations, Footings, Bases Of Columns, Etc For Mass Concrete 11 5.9.5 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Lintels, Beams, Plinth Beams, Girders Bressumers And Cantilevers 12 5.9.6 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts 13 5.1.2 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level:1:1:5:3 (1 Cement 1.5 Coarse Sand :3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 14 5.2.2 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Up Tot Floor Five Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement :1:1.5:3( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 15 5.9.3 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Suspended Floors, Roofs, Landings, Balconies And Access Platform 16 5.3 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs, Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone Iii) Derived From Natural Sources: 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). 17 5.22.6 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelthermo - Mechanically Treated Bars Of Grade Fe-500D Or More 18 2.25 Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundation Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M. 19 50.6.1.2 Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20X20Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement: 6 Coarse Sand) Etc Complete. 20 13.7.1 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix:1:3 ( 1 Cement : 3 Fine Sand) 21 13.1.1 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand) 22 50.9.1.1 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately), Using Good Quality Anjili Wood /Jack Wood 23 50.9.2.1 Providing And Fixing Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows, 35 Mm Thick Shutters Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Bepaid For Separately, All Complete As Per Direction Of Engineerin - Charge Using Anjili/ Jack Wood 24 50.9.6.1 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4 Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. Using Anjili Wood / Jack Wood 30 Mm Thick Shutters 25 14.29 Providing And Fixing M.S. Round Or Squre Bars With M.S. Flats At Required Spacing In Wooden Frames Of Windows And Clerestory Windows. 26 10.27.5 Providing And Fixing Carbon Steel Galvanised ( Minimum Coating 5 Micron) Dash Fastener Of 10 Mm Dia Double Threaded 6.8 Grade (Yield Strength 480 N/Mm2), Counter Sunk Head, Comprising Of 10 M Dia Polyamide P A 6 Grade Sleeve, Including Drilling Of Hole In Frame, Concrete/Masonry, Etc. As Per Direction Of Engineer-In-Charge.10X 160 Mm 27 9.76 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 28 9.92.1 Providing And Fixing Chromium Plated Brass Handles With Necessary Screws Etc. Complete:125 Mm 29 9.74.3 Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Necessary Screws Etc. Complete:150X10 Mm 30 9.83 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete. 31 Od123879/2025-2026 Providing And Fixing Frp (Fibre Reinforced Polymer) Door Shutter Of Size 90Cm And 28-30Mm Thickness With Frame 110Mm Thickness With Necessary Fittings Like Hinges, Cost Index (Place) : Kollam, Gst : 18% Printed On 2026-03-17 13:56:12.13 4 Including All Materials And Labour Charge Etc As Per The Direction Of Engineer In Charge 32 Od123885/2025-2026 Providing And Fixing Frp (Fibre Reinforced Polymer) Door Shutter Of Size 80Cm And 28-30Mm Thickness With Frame 110Mm Thickness With Necessary Fittings Like Hinges, Tower Bolts, Handles, Mortice/Cylindrical Locks And All Other Accessories Etc. Complete Including All Materials And Labour Charge Etc As Per The Direction Of Engineer In Charge 33 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 600 X 600 Mm. 34 11.46.2 Providing And Laying Vitrified Tiles Indifferent Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete.Size Of Tile 600X600 Mm 35 11.37 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete 36 8.31 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In- Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 37 11.16.1 Precast Terrazo Tiles 22 Mm Thick With Graded Marble Chips Of Size Upto 12Mm, Laid In Floors, And Landings, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles Including Rubbing And Polishing Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) :Light Shade Pigment Using White Cement 38 8.2.2.2 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror, Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations, Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels.Area Of Slab Over 0.50 Sqm 39 8.3.2 Providing Edge Moulding To 18 Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer -In-Charge.Granite Work 40 13.80 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 41 13.43.1 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 42 13.60.1 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 43 13.47.1 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm) 44 13.85.1 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound) Content.With Ready Mixed Pink Or Grey Primer On Wood Work (Hard And Soft Wood ) Having Voc Content Less Than 50 Grams/ Litre 45 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 46 10.28 Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) 47 Od134882/2025-2026 Supplying And Fixing Anganwadi/Library/Vignjaanwadi Name Board With Emblem Using Acrylic Sheet Base With Reflective Type Sticker As Per Required Shade And Color Etc Complete. Size Of Board 3.00Mx 0.60M 48 Od134893/2025-2026 Providing And Fixing Anganwadi/Library/Vignjaanwadi -Foundation Stone/Inauguration Stone Using Granite Of Size 70.00X135.00 Cm ,18Mm Thick With Writing Letters In Golden Colour Including Of All Material And Labour Charges Etc. Complete As Per The Directions Of Engineer-In-Charge. 49 2.1.1 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Up To 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed:All Kinds Of Soil 50 16.68 Providing And Laying 60 Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M - 30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Fine Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. 51 50.10.1 Steel Work In Built Up G I Tubular ( Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting,Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete 52 50.10.2 Steel Work For Purlin/Single Section With G I Pipes Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete 53 12.50 Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+0.05%), Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling/Self Tapping Screws Of Size (5.5X55Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 54 12.51.1 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screwscomplete :Ridges Plain (500-600 Mm) 55 Od141946/2025-2026 Providing And Fixing 8 Upvc Aqua Pathy ( Gutter) With M.S Clamp All Complete As Per Direction Of Engineer-In-Charge. 56 1)Vignjaanwadi,Library Cum Reading Room-First Floor 57 5.9.6 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts 58 5.9.5 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Lintels, Beams, Plinth Beams, Girders Bressumers And Cantilevers 59 5.2.2 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Up Tot Floor Five Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement :1:1.5:3( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 60 5.9.3 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Suspended Floors, Roofs, Landings, Balconies And Access Platform 61 5.3 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs, Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone Iii) Derived From Natural Sources: 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). 62 5.22.6 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelthermo - Mechanically Treated Bars Of Grade Fe-500D Or More 63 50.6.1.2 Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20X20Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement: 6 Coarse Sand) Etc Complete. 64 13.7.1 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix:1:3 ( 1 Cement : 3 Fine Sand) 65 13.1.1 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand) 66 13.4.1 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Coarse Sand) 67 50.9.1.1 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately), Using Good Quality Anjili Wood /Jack Wood 68 50.9.2.1 Providing And Fixing Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows, 35 Mm Thick Shutters Including Isi Marked M.S. Pressed Butt Hinges Bright Cost Index (Place) : Kollam, Gst : 18% Printed On 2026-03-17 13:56:12.13 9 Paid For Separately, All Complete As Per Direction Of Engineerin - Charge Using Anjili/ Jack Wood 69 50.9.6.1 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4 Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. Using Anjili Wood / Jack Wood 30 Mm Thick Shutters 70 14.29 Providing And Fixing M.S. Round Or Squre Bars With M.S. Flats At Required Spacing In Wooden Frames Of Windows And Clerestory Windows. 71 10.27.5 Providing And Fixing Carbon Steel Galvanised ( Minimum Coating 5 Micron) Dash Fastener Of 10 Mm Dia Double Threaded 6.8 Grade (Yield Strength 480 N/Mm2), Counter Sunk Head, Comprising Of 10 M Dia Polyamide P A 6 Grade Sleeve, Including Drilling Of Hole In Frame, Concrete/Masonry, Etc. As Per Direction Of Engineer-In-Charge.10X 160 Mm 72 9.76 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 73 9.92.1 Providing And Fixing Chromium Plated Brass Handles With Necessary Screws Etc. Complete:125 Mm 74 9.74.3 Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Necessary Screws Etc. Complete:150X10 Mm 75 9.83 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete. 76 Od127305/2025-2026 Providing And Fixing Frp (Fibre Reinforced Polymer) Door Shutter Of Size 80Cm 28-30Mm Thickness With Frame And Tower Bolts, Handles, Mortice/Cylindrical Locks And All Other Accessories Etc. Complete Including All Materials And Labour Charge Etc As Per The Direction Of Engineer In Charge 77 Od126510/2025-2026 Providing And Fixing Frp (Fibre Reinforced Polymer) Door Shutter Of Size 90Cm And 28-30Mm Thickness With Frame 110Mm Thickness With Necessary Fittings Like Hinges, Tower Bolts, Handles, Mortice/Cylindrical Locks And All Other Accessories Etc. Complete Including All Materials And Labour Charge Etc As Per The Direction Of Engineer In Charge 78 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 600 X 600 Mm. 79 11.46.2 Providing And Laying Vitrified Tiles Indifferent Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete.Size Of Tile 600X600 Mm 80 11.37 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete 81 8.31 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In- Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 82 13.80 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 83 13.43.1 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 84 13.60.1 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 85 13.47.1 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm) 86 13.85.1 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound) Content.With Ready Mixed Pink Or Grey Primer On Wood Work (Hard And Soft Wood ) Having Voc Content Less Than 50 Grams/ Litre 87 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 88 10.28 Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) 89 Od135395/2025-2026 Supplying And Fixing Anganwadi/Library/Vignjaanwadi Name Board With Emblem Using Acrylic Sheet Base With Reflective Type Sticker As Per Required Shade And Color Etc Complete. Size Of Board 3.00Mx 0.60M 90 1)Plumbing Works -Ground Floor & First Floor 91 17.3.2 Providing And Fixing White Vitreous China Pedestal Type Water Closet Bend With Fittings & C.I. Brackets, 40 Mm Flush Bend, Overflow Arrangement With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required :W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid 92 50.17.1.5 Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 93 17.7.2 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630 X 450 Mm With A Single 15 Mm C.P. Brass Pillar Tap 94 17.9.1 Providing And Fixing Kitchen Sink With C. I Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required:White Glazed Fire Clay Kitchen Sink Of Size 600X450X250 Mm 95 18.53.1 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is: 893115 Mm Nominal Bore 96 18.32.1 Constructing Masonry Chamber 30X30X50 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Stop Cock, With C.I. Surface Box 100X100X75 Mm (Inside) With Hinged Cover Fixed In Cement Concrete Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design:With Common Burnt Clay F.P.S (Non Modular) Bricks Of Class Designation 7.5 97 17.73.2 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighting Not Less Than 190 Gms 98 18.51.1 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms.15 Mm Nominal Bore 99 50.18.7.2.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Claps At 1.00 Metre Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 20 Mm Dia 12Kgf/Cm2 - Internal Work - Exposed On Wall 100 50.18.9.3.2 Providing And Fixing Pvc Pipes Includes Jointing Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 25 Mm Dia 10Kgf/Cm2 101 50.18.7.6.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10 Kfg/Cm - Internal Work- Exposed On Wall 102 50.18.9.7.1 Providing And Fixing Pvc Pipes Includings Of Pipes With One Step Pvc Solvent Cement, Trenching Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 63 Mm Dia 6Kgf/Cm3 103 50.18.9.9.1 Providing And Fixing Pvc Pipes Includings Jointing Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.110 Mm Dia 6Kgf/Cm2 104 50.18.9.22.1 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110 Mm Dia Elbow 105 50.18.9.22.2 Providing And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110 Mm Dia 45 Degree Elbow 106 50.18.9.22.4 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement- 110 Mm Dia Bend 107 50.18.9.22.5 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes Including Jointing With Pvc Solvent Cement 110X110X110 Mm Dia Tee 108 50.18.9.22.7 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110X110X75 Mm Dia Door Tee 109 18.58.2.1 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Rectangular Type With Openable Circular Lid150 Mm Nominal Size Square 100 Mm Diameter Of The Inner Hinged Round Grating 110 51.19.St4 Supplying And Installing Ready Made Pvc Septic Tank Including The Cost Of Carriage, Trenching, Placing At The Level Below Ground Level As Specified As Per The Direction Of Engineer In Charge (Provision For Cc/Rcc/Sand/06Mm Aggregate For The Preparation Of Bed Shall Be Paid Separately) 4. 35 To 50 Flush Capacity 111 18.48 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank :Isi 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 112 Od141980/2025-2026 Providing 25Mm/32Mm (3/4 Inch/1 Inch) Public Building Connection With 20Mm (3/4 Inch) Water Meter From Existing Ci Mains Up To 125 Mm Dia., Up To A Length Of 5 M Using 25Mm Indian Standard Class 6 Upvc Pipe And Upvc / Gm / Brass Specials Viz. Brass Ferrule, Gm Full Way Wheel Valve, Elbow, Mta, Fta, Couplers Etc. And Connecting With The Mains, Testing The Joints Etc. Complete Including Trenching And Refilling In All Kinds Of Soil Up To A Depth Of 1.50M For Main Line Tracing And Trench Of Average Cross Section 0.3M X 0.75M For Laying Connection Pipe And Service Pipe, Fixing Water Meter, Lighting, Watching, Providing Caution Boards, Traffic Control Etc. Complete Including Cost Of Materials, Hire For Tools, Cost Of Consumables And Labour Charges , Cost Of Water Meter And Meter Box, Deposit Charges Of Kwa And Including Charges For Cutting The Concrete / Tarred / Bituminous Roads Etc, If Necessary And As Per The Direction Of The Engineer-In-Charge. 113 1)Electrical Works -Ground Floor & First Floor 114 1.10.3 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required.Group C 115 1.14.2 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 116 1.23.4 Supplying And Fixing Following Piano Type Switch / Socket On The Existing Switch Box/ Cover Including Connections Etc. As Required.3 Pin 5/6 Amp Socket Outlet 117 1.24.3 Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15/16 Amp Switch 118 1.24.5 Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15/16 Amp Socket Outlet 119 1.12 Wiring For Light/ Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit Along With 1 No 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. 120 2.3.3 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 12 Way, Double Door 121 1.25 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 122 5.4 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required. 123 5.19 Providing And Fixing 4.00 Mm Dia Copper Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required. 124 1.27.2 Supplying And Fixing Following Size/ Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module (100Mmx75Mm) 125 2.14.2 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral),240 Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Milli Amperes In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps 126 2.10.1 Supplying And Fixing 5A To 32 A Rating, 240/415 Volts, 10 Ka, \\C\\ Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole 127 1.14.1 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 128 2.12.1 Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 129 Od123876/2025-2026 Supplying And Fixing Following 32 Amps Modular Dp Switch And Other Accessories Etc Complete 130 Od123878/2025-2026 Supplying And Fixing 14 W Led Connect With Bulk Head Fixing And Other Accessories 131 Od123874/2025-2026 Supply And Fixing Angle Batten With 7/9 Watts Led And Other Accessories 132 Od123877/2025-2026 Supply And Fixing Angle Batten With 14/15 Watts Led And Other Accessories 133 Od123872/2025-2026 Supplying And Fixing 20W Led Tube Set (Approved Brands) And Other Accessories 134 90.4.5.4 Supply, Installation, Testing And Commissioning Of Ceiling Fan Of Following Sizes Including Wiring The Down Rods Of Standard Length (Up To 30 Cm) With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable Etc. As Required. 1200Mm Sweep - Ceiling Fan Complete With Service Value Minimum 4.0(Cub Meter/Minute/Watt), Air Delivery Minimum 210(Cubic Meter/Minute), Copper Winding Suitable For 230V/240V Single Phase Ac Supply 135 Od123875/2025-2026 Supplying, Installing, Testing And Commissioning Of Wall Mounted Single Phase 2 Wire Energy Meter With Meter Box Poly Carbonate Body Having Range Of 32 Amp With Enclosure Made Out Of Powder Coated 16 Swg Sheet Suitable For Fixing In Surface/ Recess With Fuse Unit 32 Amp With Neutral Link, Its Interconnection Etc. The Enclosure Shall Have Lockable Door With Glass Window And All Mounting Accessories Etc. Complete As Required Including Kseb Charges 136 2)Childrens Play Equipments 137 Od135736/2025-2026 Supply And Fixing ChildrenS Play Equipment Circular See-Saw Including Cost Of All Materials And Labour Charges Etc Complete. 138 Od135738/2025-2026 Supplying And Fixing ChildrenS Play Equipment Step With Slide Including Cost Of All Materials And Labour Charges, Etc. 139 3)Community Hall-Renovation-Civil Works 140 15.28.1 Dismantling Roofing Including Ridges, Hips, Velleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of :G.S. Sheet 141 15.19 Dismantling Steel Work Manually / By Mechanical Means In Built Up Sections Without Dismembering And Stacking Within 50 Metres Lead As Per Directions Of Engineer -In- Charge. 142 15.2.2 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In-Charge.Nominal Concrete 1:4:8 Or Leaner Mix ( Including Equivalent Design Mix) 143 13.33.1 Pointing On Stone Work With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand):Flush/ Ruled Pointing 144 5.1.2 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level:1:1:5:3 (1 Cement 1.5 Coarse Sand :3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 145 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 600 X 600 Mm. 146 13.1.1 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand) 147 13.91 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 148 13.43.1 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 149 13.60.1 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 150 13.47.1 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm) 151 13.88 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 152 13.85.1 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound) Content.With Ready Mixed Pink Or Grey Primer On Wood Work (Hard And Soft Wood ) Having Voc Content Less Than 50 Grams/ Litre 153 13.99.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade :One Or More Coats On Old Work 154 50.10.1 Steel Work In Built Up G I Tubular ( Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting,Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete 155 50.10.2 Steel Work For Purlin/Single Section With G I Pipes Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete 156 12.50 Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Cost Index (Place) : Kollam, Gst : 18% Printed On 2026-03-17 13:56:12.13 20 Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling/Self Tapping Screws Of Size (5.5X55Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 157 12.51.1 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screwscomplete :Ridges Plain (500-600 Mm)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Kerala View Result →
7.
Public Administrative Department #11306281 AOC
Tender For Various development Works At Swami Ramdev Maharaj Sports Complex.-ITEM NO: 1 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (SSR Item No: 46.19) (PMC Bhavan) Unique No (16026) Rate List Year (2024-2025) ITEM NO: 2 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. (SSR Item No: 46.12) (PMC Bhavan) Unique No (16019) Rate List Year (2024-2025) ITEM NO: 3 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR Item No. 21.02) (PMC Bhavan) Unique No (15202) Rate List Year (2024-2025) ITEM NO:4 Transportation of material obtained from excavation including soil, Cu.M rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes, channels etc. Obtained from excavation, dismantling, loading in a Truck of minimum 5 Cu M capacity or designed capacity and transporting within the municipal limits or any designated place, unloading, stacking or spreading of material etc. complete. As directed by Engineer In charge (SSR Item No: 78.36) (PMC Bhavan) Unique No (17223) Rate List Year (2024-2025) ITEM NO: 5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. (SSR Item No: 21.38) (PMC Bhavan) Unique No (15233) Rate List Year (2024-2025) ITEM NO: 6 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (SSR Item No: 21.37) (PMC Bhavan) Unique No (15232) Rate List Year (2024-2025) ITEM NO: 7 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 24.10) (PMC Bhavan) Unique No (15312) Rate List Year (2024-2025) ITEM NO: 8 Supply of Titanium FIFA Certified Soccer Turf EB-50 MM Series Grass:- Material /Dtex: PE12000 Structure Monofilament Yarn Pile Height (mm): 50 10cm): 15 Stitch rate (Per 10 cm):15 Guage (inch): 5/8 Stitches/m2:9450 Roll (Mtr) Width x Length: 4 or 2 x 30,5 Breaking: Triple Layers High wear resistance & perfect ball roll properties Economical System & UV Resistance Creative Technology & Quick Construction Natural & Beautiful appearance Good performance Reinforced Playability 3 years Turf Warranty 1 year Glue Warranty SBR Black Rubber Granuels in size of 8mm to 2.4mm 10kg/m2 Silica Sand 18kg/m2 Silica Sand 18kg/m2 Tape & European PU glue with hardner (Ration 2:1) According to Layout Colour-Green Plan Installation Installation of Turf with inhouse trained installation team Infill of Silica Sand & Granules Brushing & Line Marking. Including Transportation (SSR Item No: 72.4) (PMC Bhavan) Unique No (17099) Rate List Year (2024-2025) ITEM NO: 9 Cricket Pitch Turf Providing & Fixing Full Pitch Synthetic Turf 15 mm thk. of size 30 M X 2.75 M. over Tremix surface (Excluding Tremix) with suitable arrangement/adhesive as per manufacturers specification rolling with hand roller for removing air gaps as directed by Engineer In charge etc. complete. (SSR Item No: 72.1) (PMC Bhavan) Unique No (17096) Rate List Year (2024-2025) ITEM NO: 10 Providing & Fixing nylon net 35mmx35mmx1.75mm including top and side. (SSR Item No. 72.2) (PMC Bhavan) Unique No (17097) Rate List Year (2024-2025) ITEM NO: 11 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (SSR Item No: 42.52) (PMC Bhavan) Unique No (15904) Rate List Year (2024-2025) ITEM NO: 12 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (SSR Item No: 23.01) (PMC Bhavan) Unique No (15297) Rate List Year (2024-2025) ITEM NO: 13 Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. (SSR Item No: 23.12) (PMC Bhavan) Unique No (15307) Rate List Year (2024-2025) ITEM NO: 14 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters (SSR Item No: 42.53) (PMC Bhavan) Unique No (15905) Rate List Year (2024-2025) ITEM NO 15 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon)coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coal on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fiuting in the five pan at nominal 180-250 mm center to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) with COLORBOND (R) steel quality super durable polyester paint (SSR Item No: 38.34) (PMC Bhavan) Unique No (15655) Rate List Year (2024-2025) ITEM NO: 16 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints. raking out joints, watering and scaffolding etc. Complete (SSR Item No. 27.13) (PMC Bhavan) Unique No (15381) Rate List Year (2024-2025) ITEM NO: 17 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (SSR Item No: 32.11) (PMC Bhavan) Unique No (15444) Rate List Year (2024-2025) ITEM NO: 18 Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. (SSR Item No: 44.10) (PMC Bhavan) Unique No (15994) Rate List Year (2024-2025)
Contract Date: Jun 19, 2026 Contract Value : ₹ 33.26 Lakh
Local Bodies No of Bidders 3
Maharashtra View Result →
8.
Housing Urban and Rular Development #11286216 AOC
Tender For Construction Of New Primary Health Center (Phc New Bldg) At Perumalmalai H/O Adukkam, Kodaikanal Block.; 2 Clearing lightjungle vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 3 Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. 4 Supplying and filling in foundations and basement with fillingM sand in layers not exceeding 15 cm. thick, well watered ,rammed and consolidated etc. complete complying with standard specifications. 5 Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement. 6 Refilling the approved good quality earth in plinths, area development etc. wherever specified in layers is not exceeding 200 mm thick, with available earth at site. 7 Supplying and filling of good earth filling locally available earth transported from the outside including consolidation,leveling specifiedin layers of not exceeding 200 mm thick., etc. complete. 8 Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid). 9 Upto Basement 10 Ground Floor 11 First Floor 12 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement ratio with plasticizer using 20mm and down concrete structural elements under controlled water graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the depart- mental officers comple.-1m3 13 Foundation & Basement 14 Ground Floor 15 First Floor 16 Steel - Fe 500D : Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers. 17 Brick work in following Cement Mortar 1:5 using best quality Country bricks of size 83/4 x 41/4 X2 3/4 for foundation and basement including curing etc., complete complying with standard specification. Including scaffolding curing cost of reinforcement etc. all complete as per specifications and drawings as directed by the Engineer in-charge. 18 Foundation basement 19 Ground floor 20 First floor 21 Brick partition walls of 11.50cm thickness using best quality Country bricks of size 83/4 x 41/4 X2 3/4in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately). 22 Ground Floor 23 First Floor 24 PLASTERING WORK 25 Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing.The Surface shall then be allowed to dry for atleast 48 hours.It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface.Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete].The Putty shoule be got approved by the Executive Engineer before use on work. 26 Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and ThreeM.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers 27 Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface,chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent andas directed. 28 FLOORING AND DADOOING 29 Paving the floor with best quality Vitrified Tiles of size 600 x 600 x 8mm of approved color, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same color pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works).Basic Cost-Rs.776/sq.m 30 Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works).Basic cost-Rs.464/sq.m 31 Dadooing the walls with colouredDadooing Ceramic tiles of size 150mm x 150mm x 6mm approved size , quality and colour set in CM 1 : 2 - 10 mm thk. And pointed with suitable cement including finishing the joint and pointing flesh with walls and tile surfacein all floors at the rate of 0.40 Kg /Sqm etc. complete. 32 Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works). 33 Providing, fabricating and fixing M.S. grillsWindows,and ventilator, gates, ladders, rail pipes, nosing angles, with M.S.lugs in staircase steps etc., made out of M.S rods, flats, angles, pipes, channels etc. including necessary fixtures complete as per drawings and specifications and as directed by the Engineer. 34 S.S Handrail 35 Manufacturing,supplying and fixing of stainless steel handrails for staircase using 50mm dia 304L grade stainless steel pipe of 1.6mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1mm thick as vertical at 900mm centre with 2 Nos of 25mm dia intermediate horizontal stainless steel pipe of 1.6mm thick in between.The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete.The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance,electrical charges,ect.complete. 36 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete 37 Supply and Fabrication of UPVC doorincluding cost and conveyance of all charges etc complete. 38 Solid PVC door shutters Toilet door using 19 Gauge 19mm MS square tubes for styles and outer frames.15mm MS square tubes for top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets.Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings.The over all size of styles shall be 50mm x 30mm.The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. 39 UPVC Windowsupplying and fixing UPVC ( Un-PLASTICIZED Polyvinyl chloride) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with g/1mm 125GSMand 100% corrosion free, the profiles are multi chambered sectionwith wall thick of 2mm. The EPDM rubber (black color) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power points locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed or plainglass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and shouldhave key lockable action, security protective hinges, strong lockingsystems and as per sizefor arrestingnoise and energy loss. 40 UPVC VENTILATOR: Supplying and fixing UPVC ( Un-PLASTICIZED Polyvinyl chloride)Louvered Ventilators of from the profile the size of outer frame 60x58mm and shutter profile the size of 60x78mm both profile size of 60x78mm both profiles are reinforced with GI/1MM 125GSMand 100% corrosion free , the profile are multi chambered sections withwall thick of 2mm. The EPDM rubber (black color) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiation pin headed glass 4mm thick should be fixed to the wall with 100% packing with screws and silicon packing all around the frame. The ventilator should be got approved from the Executive Engineer before use on work. 41 PAINTING WORK 42 Painting two coats of synthetic Enamel paint of approved colour and make over one coat of anti corrosive Zinchromite primerover new wood / steel work, suitably prepared for receiving the paint by surface scraping, rubbing applying filler etc. including cost of filler, primer, paint all complete as per drawings and specifications. 43 Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the wallssmooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification.(The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). 44 Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. 45 Weathering Course Concrete using best quality broken brick jelly of 20 mm uniform gauge in pure slaked lime ( NO Sand to be used ( over the RCC roof slab in the proportion of brick jelly to lime being 32 : 121/2 by volume laid over in single layer and consolidated to the required slope and finished thickness and beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime, jiggery water etc. complete complying with standard specifications and as directed 46 Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. 47 Plumbing Work 48 Supplying and fixing of Indus floor mounted white colour European water closet Parryware or equivalent, with seat cover and dual flush (3 & 6 lit) cistern having P trap withseat cover, supplyingnon corrosive hinges, CP bolts, nuts, washers, providing and fixing dash anchor fastners with bolts / L -brackets with anticorrosive paint cutting grooves in masonry or concrete surfaces, groutingwith cement concrete 1:2:4 mix, using 20mm size stone jelly,restoring the damaged portion to their original condition using required materials,fixing the water closet to perfect level,alignment,testingetc.complete. 49 Providing and keeping in stores, shifting to the place of installation, fixing,testing and commissioning ofwhite coloured vitreous china under counterRegular rectangular wash basin with brackets/ G.I. rag bolts and nuts painted,32mm dia brass C.P. waste coupling, (heavy) 32mm diabrassC.P.bottletrap,15mmdiabrassC.P.Anglestopcockwith flange, 15mm dia brass C.P. coldwater connecting pipe, etc., The work shall include,required extension nipples, cutting / chasing and making good the walls and floors- toilets. Wash Basin 50 Supply & Fixingat sitein position 15mm dia C.P brass BIB COCKS long body with wall flangeincludingcuttingandmakinggoodthe wallswhereverrequired 51 Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc.,complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). 52 Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks). 53 Supplying and fixing in positionC.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.(D) 54 Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition,including testing for any leakages,etc.,complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). 55 a) 40mm dia. 6kg class PVC pipes. 56 b) 50mm dia. 6kg class PVC pipes. 57 c) 75mm dia. 6kg class PVC pipes. 58 d) 110mm dia. 6kg class PVC pipes. 59 Supplying and fixing in position cost iron Nahini / Floor trap with Stainless steel grating / PVC nahini / Floor Trap with PVC Grating type of size 100 x 75 / 75 x 50 mm with best quality gratings of approved brand fixed over a bed of brick jelly lime concrete 1;2;5 (One lime two sand and five aggregate ) brick jelly 40mm and finishing with cm 1;3(One cement and three sand) including dismantling masonary wherever found necessary and making good to the original condition and giving connections to the cast iron pipe etc, complete complying with standard specififcation and as directed by the departmental Officers. 60 Supply and fixing in position best quality PVC IS 4985 - CLASS-II - 4 Kg/Sqcm -Rain water pipes of various size having ISI mark and providing leak proof joints with such asBend, Tee Junction, door etc.,of approved qualityincluding fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitary fittings, wherever necessary and making chipping good to the original condition, complying with standard specification etc.,complete. 61 b).110mm dia. 4kg class pipes. 62 Supplying and fixing in position of the following dia PVC rain water gratings for rain water pipes ,of approved quality and varietyof various size confirming to ISS andincluding necessary cutting and fixing and giving connection to PVC pipes etc., complete complying with standard specification and as directed by the Departmental Officer. 63 110mm dia 64 Supplying and fixing in position of the following dia PVC specials such asPVC vent Cowl etc.,of approved quality and varietyof various size confirming to ISS amend providing leak proof joint etc., including necessary cutting and fixing and giving connection to PVC pipes etc., complete complying with standard specification and as directed by the Departmental Officer. 65 a)75mm Dia 66 b)110mm Dia 67 PART-C - EXTERNAL DRAINAGE 68 Soil/ Waste Pipes 69 Supply and fixing in position best quality PVC IS 4985 - CLASS- III - 6 Kg/Sqcm -Soil/ waste pipes of various size with approved quality and varietyof various size confirminghaving ISI mark and providing leak proof joints including erection of below groundwith excavation and refilling etc.,and making connection to Manholes /Gully trap,wherever necessary and making chipping good portion to the original condition,complying with standard specification etc., complete. 70 160mm dia. 6kg class III-pipes. 71 Supply, laying and erction of glazed stone ware gully trap (100 x 75 mm) with 100 mm dia, outlet including embedding trap in cement concrete 1:3:6 and constructing chamber of size 300 x 300 mm inside clear in brick masonry 230 mm thick, plaster with water proof cement mortar (1:3) 15 mm thick on both internal and external surfaces inside finished with floating coat of neat cement. The work including excavation to required depth of gully trap and refilling and making good in the surface withProviding and fixing SFRC frame and cover 400 x 400 mm (clear opening) complete complying with std.specification. 72 Supplying and Erection and construction of sewer chambers of required internal dimensions 600x600 upto 0.6 mtr.depth with 230mm brick masonry in C.M.1:5 thk of masonry over bed of1:2:4 R.C.C. 200 mm thk bove 100 mm thk P.C.C.1;3:6 Cement concrete foundations over sand bed of 100mm thk channelling in 1;2:4 cement concrete, plastering in 1:3 cement mortar for internal and external surface finished with floating coat of neat cement, the work including excavation for required depth of gully trap and refilling and making good in the surface with SFRC cover and frame 600x600mm (clear opening)complete complying with standard specifications etc., 73 Construction of rain water recharge well of 1200mm dia and depth upto 1500mm, in addition 110 dia special blue slotted pipe for bore well.pipe should be laid from bottom of ring well centre to below 1500mm as shown in the drawings,including all types of excavation, occur for pipe,filling of rain water harvesting materials with construction of R.C.C. ring and top 100mm RCC SLAB WITH 450X450mm perforated SFRC manhole and 230mm brick wall in 2height with below 300mm lengthx100mm thk P.C.C. as per the structural filling the filter media as per drawing. 74 Supplying and fixing of PVC water storage tank of best approved quality and make of super thick with lid ofcapacity of 2000 litres with accessories including giving necessary connection etc., complete as directed by the departmental officer. (The PVC water storage tank should be got approved by the Engineer before use on work)(TWAD- Pano:173) 75 provision for rainwater harvesting structure 76 Electrification 77 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) 78 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End 79 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End 80 Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.) 81 Supply and fixing of fancy glass shade and 7W / 9W LED bulb 82 Supply and fixing of single box type 440W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting 83 Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch 84 Supply and fixing of 1200mm (48) AC ceiling fan complete with stepped electronic 300W regulator with 300mm down 85 Supply and fixing of 300mm (12) sweep (light duty) AC exhaust fan complete without provision of hole in the wall 86 Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End 87 Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End 88 Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earthconnection (For AC Plug) 89 Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End 90 Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End 91 Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipeconcealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of theconcealed portion with suitable colour 92 Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. 93 Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVCrigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitablecolour 94 Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 6 sq.mm copper wire with painting of suitablecolour 95 Supply and run of 1 of No.8 SWG GI wire for earth connection 96 Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earthconnection 97 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 40mm 98 Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2 x 1-1/2 x 1/4 rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1 x 1/4 with inter connection of EB meter tofuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Lower End) with suitable necessary connection with earth connection complete 99 Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only 100 Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing 101 Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection 102 Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection 103 Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 104 Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 105 Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good 106 Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 107 Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 108 Septic Tank 109 Earthwork for foundationsand depositing on bank with initial lead of 10 Mt. and initial lift of 2 Mt. in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soilincluding excavated earth. 110 Supplying and filling in foundation and basement with M sand in layers of not more than 10cm thick well watered, rammed and consolidated etc., complete as per standard specification. 111 Laying the Plain Cement concrete 1:4:8(One cement four sand and eight brokenMachine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.The rates inclusive of Centering , shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts and curing etc.. 112 Supplying and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) 113 REINFORCED CEMENT CONCRETE M25 1:1.5:3 mixusing 20mm machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 (One cement and three sand ) and Kraft paper laid without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers. 114 Brick work in following Cement Mortar using best quality of Country Bricks of size 8-3/4 x 4-1/4 x 2-3/4 for foundation and basement including curing, etc., complete complying with standard specifiction. 115 Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally and externally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or champhering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface,chiseling the undulated surface wherever necessary and curing, etc., all materials and labour complete in all respects including all lead, lift and descent andas directed. 116 Supplying and fixing in position C.I.Manhole covers (heavy duty) mof various sizes of best approved quality and as per standard specificationsetc., complete.0.6X0.6M Size etc., complete. 117 Providing, machine mixing and laying on the P.C.C/ R.C.C. surface in approved panels of25 mm thick granolithic flooring in cement concrete mix of 1:2:4 (1 Cement: 2 Sand: 4 Aggregate 10 to 12 mm thick)well vibrated,compacted including 45 X 3 mm glass dividing strip, fixed to correct level and finished smooth and cured by keeping surfaces well-covered and protected against excess of an type. (The contractor to provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond and any curling, lifting or beybonding noticed shall be rectified by the contractor at his cost). 118 Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication. 119 Under Ground Sump 120 Earthwork for foundationsand depositing on bank with initial lead of 10 Mt. and initial lift of 2 Mt. in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soilincluding excavated earth. 121 Supplying and filling in foundation and basement with M sand in layers of not more than 10cm thick well watered, rammed and consolidated etc., complete as per standard specification. 122 Laying the Plain Cement concrete 1:4:8(One cement four sand and eight brokenMachine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.The rates inclusive of Centering , shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts and curing etc.. 123 Supplying and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) 124 Reinforced Cement Concrete 1:11/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers 125 Providing and applying 10 mm thick Cement plaster in Cement mortar 1:3 ( One part of Cement and Three parts of Sand ),to finishing the exposed surfaces of R.C.C. items of works such as Roof (or) floor slabs, beams,and Sun shades etc.to correct plane and l 126 Providing, machine mixing and laying on the P.C.C/ R.C.C. surface in approved panels of 25 mm thick granolithic flooring in cement concrete mix of 1:2:4 (1 Cement: 2 Sand: 4 Aggregate 10 to 12 mm thick)well vibrated,compacted including 45 X 3 mm glass dividing strip, fixed to correct level and finished smooth and cured by keeping surfaces well-covered and protected against excess of an type. (The contractor to provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond and any curling, lifting or beybonding noticed shall be rectified by the contractor at his cost) 127 Supplying and fixing in position C.I.Manhole covers (heavy duty) of various sizes of best approved quality and as per standard specificationsetc.,complete.0.6X0.6M Size etc., complete. 128 PVC mould CI steps for sump 129 Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication. 130 Aluminium ladder for maintenance over the Roof top 131 Provision for lab interior 132 Tactile Flooring and Braille Sign Board 133 Provision for Sitting bench and Cubboard Arrangements 134 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}
Contract Date: Jun 13, 2026 Contract Value : ₹ 1.68 Crore
Local Bodies No of Bidders 2
Tamil Nadu View Result →
9.
Public Administrative Department #11271808 AOC
Bids Are Invited For Providing, Supplying And Placing Of Storage Unit. Overall Size Shall Be 916Mm(W)X486Mm(D)X1981Mm(H) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. It Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). Plenty Of Colour Options And Shelving Options Shall Be Available. The Product Should Be Certified By Greenguard Gold, Iaq Gold, Greenpro & Griha., Providing, Supplying And Placing Of Storage Wooden Cabinets. Overall Dimensions Is 900Mm(W)X450Mm(D)X735Mm(H) . The Top Shall Be Wooden Top Plb(25 Mm Add In Unit Height ) .The Rigid Knock Down Construction , Back , Sides And Door Shall Be Made From 0.7 Mm High Yield Strength Crca ,Rest In 0.8 Mm Crca . Crca - D Grade As Per Is-513 . Sliding Door Arrangement Shall Have Sliding Door Wth Top Hanging Arrangement To Prevent Derailment . Each Door Shall Be Provided With 2 Plastic Roller Having Steel Ball Bearing For Smooth Movement Of Door & Less Noise . Locking Shall Be 5 Lever Cam Lock For Safe Locking . Handle Shall Be Plastic Flush & Recessed Handle . Shelving Shall Have Height Wise Adjustable Shelf Mounting . Uniformly Distributed Load Capacity Of The Shelf Is 40 Kg Maximum . Adjustable Full Shelf . Accessories Optional Shall Be Cradle With Pipes For Hanging Instadex Files . Leveler Shall Be Screw Type Leveler With Hex Plastic Base And Overall Finish Shall Be Epoxy Polyester Coated To The Thickness Of 50 Microns . For Vsdu 2 - A4 Size Box File Can Be Stored Vertically On One Shelf And Clear Space Above Second Shelf Is 220 Mm . The Product Should Be Certified By Greenguard Gold,Iaq Gold,Greenpro., Providing, Supplying And Placing Of High Back Chair. Seat/Back Assembly: The Seat Is Made Up Of 1.5 ±0.1Cm. Thick Hotpressedplywood And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. , Materialframe: Mild Steel, Powder-Coated Table Top: 25Mm Thick Pre-Laminated Particle Board (Plb) Modesty Panel: 18Mm Thick Pre-Laminated Twin Particle Board (Plt), External Dimension : 360 H X 300W X 100D Mm; Net Weigt – 7.3 Kgs; Volume (Ltrs) – 6.4 Ltrs 1)Versatile Applications: Residential/Rental Properties, Valet Parking, Offices, Malls, Hotels, Car Showrooms 2)Customisable Access: Unlock With A 4-8 Digit Password That Suits You Total Quantity : 105
Contract Date: Ref. Documents Contract Value : ₹ 39.21 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
10.
Tourism #11266721 Price Bid
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. B) All Types Of Ordinary Rock Including All Types Of Laterite Rock, Blasting Prohibited , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Brick Work Using Common Burnt Building Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) With Bricks Of Class Designation 40 Kg / Cm2 (Wire Cut Bricks) In Superstructure Upto Floor Five Level. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry Usign Fly Ash Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) With Bricks Of Class Designation 40 Kgs / Cm2. Above Plinth Upto Floor V Level 200 X 95 X 95 , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: A) All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) With Usage Of Ordinary Portland Cement Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineerin-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. Moulding As In Cornices, Window Sills Etc. Exceeding 15 Cm In Girth. , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates Columns, Pillars, Posts & Struts (Circular Or Curved In Plan) , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4b Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint. B) In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc.With Hairline Finish, Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). , Providing & Fixing Upvc Door Frame Yashashri Make Or Equivalent Made Out Of Upvc Extruded Multi Cavity Frame Of 60 Mm X 60Mm X 2Mm Wall Thickness. Frame Is Reinforced With G.I. Channel & Welded In Corners With Average Weight 0.80 Kg Per Running Mtr. These Frames Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing & Fixing 20 Mm Door Shutter Yashashri Make Or Equivalent, Made By Using 20Mm X 155Mm X 1.2Mm Upvc Multi-Cavity Section And Boarder Of 30Mm X 40Mm X 2.5Mm Upvc Multi Cavity Section. The Corners Are Joined By Inserting Polymetric Corners & Hardware Used For Fixing The Door Shutter Is Stainless Steel Hinges & S. S. Handle & S.S. Tower Bolt. The Average Weight Of 20Mm Door Shutter Is 4.60Kg Per Sq Mtr. These Upvc Sections Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete 250 X 16 X 5 Mm , Providing & Fixing Bright Finished Stainless Steel Ss 304 Grade Aldrops With Screws Etc. Complete. 250 X 150Mm. All Works Complete As Per The Drawing, Specification And Direction Of The Engineer-In-Charge-In-Charge , Providing And Fixing Stainless Steel D Type Handles With Necessary Screws Etc Complete A) L 300Mm/325Mm X 22 To 25Mm Dia , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete 125 X 70 X 4.0Mm (Ordinary Type) , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 200 X 10 Mm , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 150 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And Fixing Of Aluminium Windows With Three Tracks And Three Shutters Sliding Windows With Tubular Frame Sections Powder Coated With Pure Polyster Powder Of Thickness 15-80 Microns With Approved Standard Acessories Such As Ball Bearing Rollers Concealed Lock, 6Mm Plain Clear Glass With Epdm Beading Etc. , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete A) Dark Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. C) 80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm.D) 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In All Colours Except Grey (M35 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In Grey Colour (M35 Grade) , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade, Area Of Slab Over 0.50 Sqm A) Jet Black , Providing 25 Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer-In-Charge , Extra For Providing Opening Of Required Size & Shape For Wash Basin/ Kitchen Sink In Kitchen Platform, Vanity Counter And Similar Location In Marble/Granite/Cuddapah Stone Work, Including Necessary Holes For Pillar Taps Etc. Including Moulding, Rubbing And Polishing Of Cut Edges Etc. Complete. , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) 20 Mm Thick. , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Marble Stone Flooring With 18 Mm Thick Marble Stone (Sample Of Marble Shall Be Approved By Engineer-In-Charge) Over 20Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement:4 Coarse ) Using : , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Approved Make And Colour With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. , Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid Plain White Makrana Marble Slab 25 Mm Thick , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , Providing & Fixing In Position Double Skin Roof With Zincalume/ Galvalume Colour Coated & Bare Profile Sheet With Subtle Square Fluting Factory Cut At All Heights For Roof, Side & Gable Cladding Complete In All Respect. Top Sheet-The End Rib Shall Be Designed For Anti-Capillary Action. The Feed Material Should Be Manufactured Out Of Nominal 0.45 Mm Base Metal Thickness (Bmt), Hi-Strength Steel With Min. 550 Mpa Yield Strength, Metallic Hot Dip Coated With Aluminium-Zinc Alloy (55% Aluminium, 43.5% Zinc &1.5% Si) As Per As 1397 - Zincalume Az150 (Min. 150 Gms/Sq.Mt Total On Both Sides) With Quality Paint Coat As Per As/Nzs 2728 Type 3-4. The Paint Shall Have A Total Coating Thickness Of Nominal 35 Μm, Comprising Of Nominal 20 Μm Exterior Smp Coat On Top Surface And Nominal 5 Μm Reverse Backer Coat On Back Surface Over Nominal 5 Μm Primer Coat On Both Surfaces Of Approved Colour Shade. Total Coated Thickness (Tct) Should Be 0.50Mm. Total Painted Thickness (Tpt) Should Be In Addition To 0.50Mm. The Steel Sheet Shall Be Fastened With Nominal 40 Μm Zinc Coated Or Nominal 25 Μm Zinc-Tin Alloy Coated, Hex Head, Self-Drilling Screw As Per As 3566-2002 Class 3 Fasteners Of Approved Make With Epdm Washer As Per The Requirement Considering The Profile Shape And Design Load. The Fastener Size Shall Be Calculated As Per The Design Or Manufacturers Recommendations. The Profile Sheet, Fastener Size Etc. Shall Be Approved By The Engineer. The Sheeting Should Be With Minimum 200Mm Lap & Waterproof With Silicon Sealant Non-Hardening Neutral Cure Type Shall Be Applied At All End Laps, Complete As Directed Z-Sub Girt - Roll Formed Section 50X50x50x1.50 Tct, 120Gsm Galvanised, High Strength (345 Mpa), Approximate Wt. 1.85 Kg/R.M. Fixed With Self Tapping Screws Glass Wool Insulation With Fsk Facing 50Mm With 24 Kg/M3 Density In Between 2 Sheets. Liner Sheet-Bare Galvalume/Zincalume Roofing Sheet Of Same Profile As Top Sheet. The Feed Material Is Of Manufactured Out Of Nominal 0.45 Mm Base Metal Thickness (Bmt) (0.47 Mm Tct), Hi-Strength Steel With Min. 550 Mpa Yield Strength, Metallic Hot Dip Coated With Aluminium-Zinc Alloy (55% Aluminium, 45% Zinc) As Per As 1397 - Zincalume Az150 (Min. 150 Gms/Sq.Mt Total On Both Sides), Passivated & Resin Coated. The Feed Material Should Have Coil ManufacturerS Product Details Marked At Regular Interval For Confirming Genuinity Of The Material. Complete As Per The Directions Of The Engineer. The Steel Manufacturers Test Certificate For The Chemical & Mechanical Properties Of Steel Must Be Submitted For Approval Prior To Installation. , Add For Providing & Fixing Flashings -[Corners, Ridges, Valleys, Gable End & Trims] (Girth Upto 610Mm) Including All The Accessories Complete As Per The Directions Of The Engineer In Charge. , Providing And Fixing Prince Or Equivalent Make Pvc Swr Half Round Eaves Gutter With Bolts, Nuts And Flat Iron Brackets 40 X 3 Mm Size Complete. 140 Mm Nominal Size , Extra For Providing Flat Iron Bracket 50 X 3 Mm Size Instead Of 40 X 3 Mm Size With Necessary Bolts Nuts, Washers Etc. For Fixing A.C. Gutters To Purlins. , Extra For Providing And Fixing Prince Or Equivalent Make Pvc Swr Short Stop Ends For Socketed Half Round Eaves Gutters. 140 Mm Nominal Size , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Demolishing Reinforced Cement Concrete Work Including Stacking Of Steel Bars & Disposal Of Unserviceable Within 50 Mts. Lead. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Steelwork In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates Bolts, Nuts, Cutting Dismembering And Staking Within 50 Mts. Lead , Dismantling G.I. Sheets Roofing Including Ridges, Hips Valleys And Gutters Etc. And Stacking The Material Within 50 Meters Lead. , Dismantling Asbestos Sheet Roofing Including Ridges, Hips Valley And Gutters And Stacking The Material Within 50 Meters Lead. , Dismantling Tiled Roofing (Mangalore Or Pot Or Country Tiles) With Battens Etc. Complete Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Taking Out Existing cement concrete Interlocking Paver Blocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge. , Carting Away Unwanted Excavated Material Such As Soil, Lime, Moorum, Building Rubbish, Laterite Stone, Excavated Earth, Ordinary Rock Etc. From Site Lead Of 5 Km Including All Loading & Unloading Charges ( A ) ( By Mechnaical Automative Transport ) Contractor Should Arrange Land For Dispose Up These Material At His Own Cost Lead Upto 5 Km. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. , Supply, Fabrication And Installing In Position Ms Gates Of Required Width And Height Of Including Wicket Gate And Rolling Gate(If Necessary) Of Approved Size Made Of Channels Joists, Angles, Plates, Pipes And Ms Sheets Including Stiffeners, Bracing, Fabricated Hinges, Ms Aldrops Locking Arrangement, Tempered Steel Pivots, Guide Track Of Ms Tee, Ball Bearing Arrangement, Casters Wheels Etc. All Complete As Per Drawing, Specification And As Directed By Engineering In Charge All Complete. The Main Entrance Gate Shall Be Fabricated Out Of Mild Steel Sections Completed With Applying A Priming Coat Of Approved Steel Primer And Two Coats Of Synthetic Enamel Painting. The Structural Steel Works For Gates Shall Include Supply, Fabrication, Transportation, Erection Of Structural Steel Gates Complete With Placing In Position Embedded Parts In Concrete / Brickwork And In Road Surface Including Cutting, Grinding, Drilling Of Holes, Welding And Painting Etc Complete , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design. : , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge A) 110 Mm Dia , Supplying And Fixing Of Precast Reinforced Cement Concrete Slabs(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) At Site In Concrete Grade Of M-25 With 20 Mm Nominal Size Granitic Or Basaltic Aggregate, Consolidated By Means Of Mechanical Platform, Vibration Etc. With Lifting Hooks Of M.S. 10Mm Bars And Pvc Cups Including Cost Of Reincforcement, Certificate From Manufacturer Shall Be Produced Indicating Grade Of Concret And Minimum Content Of Steel In The Product Along With 5 Year Free Replacement Warranty In Case Of Breakage Complete And As Directed By Engineer -In -Charge. Size 900 X 400 X 100 Mm With Steel Reinforcement Not Less Than 5.0 Kgs Per Unit -12 T Capacity , Providing & Fixing Of Reinforced Cement Concrete Gril Of Size 1.00 M X 0.6 M Ht Placed And Fixed On Coping Band For Compound Wall As Per Detailed Drawing Etc Complete , Construction Of Deepstambh Of Reinforced Cement Concrete Pillar With Exposed Laterite Masonary Of Octagonal Shape (1500Mm Length Of Each Side And Total Height Of 5500Mm) With Openings For Placing Diya Lamps And Foundation Platform Of Size (1800Mm Length Of Each Side And Height Of 1500Mm) Including Molding,Etc. As Per The Detail Drawings And As Directed By Engineer In Charge. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Paduka, Padma And Kumuda For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 450 Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Corner (Ht 4.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Adhopadma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 450 Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Cornice Above Adhopadma ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 900Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2100Mm Height, 750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1500Mm Height ,750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Karnakuta ), Using 1:4 Morter Mixture With Bricks Chips, Featuring A 60Mm Height, 750Mm Width Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Yalli ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 750Mm Height, ( Maximum 4 Hands & 4 Ayaudhas ) Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1200Mm Height,( Maximum 4 Hands & 4 Ayaudhas ) Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple Small Stupi ( Bagil Paik ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2400Mm X 2400Mm X 1800Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Flowers At The Ceiling With Dia. 1.20Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Plumbing Works , Proving And Fixing White Vitreous China Wall Hung Type (European Type) Water Closet With Seat And Lid With C.I. Brass Hinges And Rubber Fittings With Flush Valve Nelson/ Similar Fully Chromium Plated With Stop Cock, Wall Flanges, Flush Pipe Or Elbow And Vaccum Breaker Coupling Etc. Including Chair Bracket/Rag Bolts, Cutting & Making Good The Walls And Floors Where Required And Concealed Seat Support - W.C. Pan With White Plastic Seat And Lid , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Two Way Bib Cock With Single Knob And Wall Flange Conforming To Is 8931:1993 15Mm Nominal Bore , Proving And Fixing White Vitreous China Water Closet Squatting Pan (Indian Type W.C. Pan) Size 580 Mm With 100 Mm Sand Cast Iron P. Or S Trap 10 Litres High Level P.V.C. Flushing Cister (Of Approved Make) With Fittings, Rack Bolts 32 Mm Diameter P.V.C Telescopic Flush Pipe With Fit Tings And Clamps 25Mm P.V.C. Over Flow Pipe With Specials & Mosquito Proof Coupling Of Approved Municipal Design And Nylon Pull Complete Cutting And Making Good The Walls And Floors Where Required Long Pan Pattern W. C. Pan , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Large Lipped Front Urinal Basin Of 590X375x390mm Size With Urinal Valve Auto Closing System With Built In Control Cock & Wall Flange With Fittings, Spreader, R.S. Or C.I. Brackets, Standard Size C.P. Brassl Flush Pipe And Spreaders With C. P. Brass Unions & C. P. Brass Clamps With Waste Fitting As Per Is 2556, Pvc Trap With Outlet Grating And Other Couplings In Cp Brass Complete, Including Painting, Fittings, Cutting And Making Good The Walls And Floors Where Required. - Range Of One Urinal Basin , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75 Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Constructing Brick Masonry Manhole Or Inspection Chamber With Second Class Bricks In Cement Mortar 1:5 (1 Cement :5 Fine Sand) Reinforced Cement Concrete Top Slab With 1:2:4 Mix (1 Cement: 2 Coarse Sand ;4 Graded Stone Aggregate 20Mm Nominal Size Foundation Concrete 1:2:4 Mix (1 Cement ;2 Coarse Sand :4 Graded Stone Agrregate 40Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With A Floating Coat Of Neat Cemetn And Making Channels In Cement Concrete 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 90 X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455 X610mm Internal Dimensions Total Weight Of Cover Ad Frame To Be Not Less Than 38 Kg. (Weight Of Cover 23 Kg. ) , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:. 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 32Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Non-Return Valve Of Approved Quality : 40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality Low Pressure With Copper Floats 25 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 20 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 25Mm Outer Dia. , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc25 Mm , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete 150 Mm , Conveying Carefully From Stack At Site, 250M From Both Sides Rolling And Lowering Into Trenches, Laying And Jointing True To Line And Level, Reinforced Cement Concrete Spun Pressure And Non Pressure Pipes Of Various Classes, Specials Including Collar And Perfect Linking Of Joint With Jack To Correct Position Including Cost Of Jointing Material In Cement Mortar 1:2, Necessary Hydraulic Testing, Curing Of Cement Mortar Etc. Complete. 150 Mm , Providing And Fixing Angular Stop Cock With Wall Flangue - Jaquar Make. Florentine (Flr-5053N) 15Mm Of Approved Quality. , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701; 1996 1000 Lit. Capacity , Supply Of Inferential, Dry Dial, Type Domestic Water Meter,Suitable For Horizontal Installation, Duly, Sealed Against Tampering With Couplings At Both Ends Having Pulse Output Facility Compatable For Automatic Reading System ,Conforming To Is:779-1974 And Iso 4064-2005 Standards And Bearing Eec/Mid/Oiml Mark, (With Latest Amendments)Along With Test Certificate From Fcri/Nabl As Desired By The Department.25 Mm , Fixing Water Meter & Stop Cock In G. I. Pipe Line Including Cutting & Treading The Pipe And Making Long Screw Etc. Complete (Cost Of Water Meter And Stop Cock To Be Paid Separately) , Providing And Fixing Brass Bib Cock (Heavy) Of Approved Quality : 15 Mm Nominal Bore , Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is 13983 Including Cutting Of Stone And Making Good The Walls Wherever Required. Kitchen Sink Without Drain Board. With Coupling & All Accessories Complete With Choke Stop Strainer, Plain Type Having Flat Borders For Correct Sandwithing Between The Plaform Top And Bottom Slabs Complete. Overall Size 610Mmx510mm (24X20) Bowl Size 545Mmx445mmx200mm (211/2X 17 1/2X 8) Depth 200 Mm. Glossy. 1.0Mm Thk, , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Pillar Cock With Extended Lever Handle And Wall Flange Confirming To Is 8931; 1993 15Mm Nominal Bore , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of Architectural Designed Pole Of 3Mtr Height Post Top Pole Made Of Galvanised Iron Sections Of 114Mm & 60Mm Dia. This Architecturally Designed Pole Is Structurally Sound. Windspeed Considered Should Be As Per Is875:Part 3:1987 ,Material For Tubes Steel Of Grade Yst210.,Material For Base Plate Steel Of Grade E250 To Is2062; 2011. The Pole Will Be Provided With An Inbuilt Junction Box To Fix 16-32Amp Connectors & 6-16Amp Mcb Inside The Cut Window Of The Bottom Pipe The Inbuilt Box Should Have A Flush Door Of Suitable Size With Allenkey Locking On Bothside. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 200X200mm Having 10Mm Thickness. The Base Plate Shall Have 4 Hole Suitable For M16/450 Foundation Bolts . The Galvanized Zinc Coat Should Not Be Less Than 65+/ 10Microns. The Galvanised Pole Should Be Painted In 3Layer Coating (Coating Thickness Should Not Be Than 80Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint With Overall 100 +/- 10 Microns. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of 45-50W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40-45W Led. Fitting Shall Be Post Top Mounting Type Fixture. System Wattage: 40-45W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply, Led Lumens:6000Lm, Cri(Ra):80, Led Colour Temperature: 4000K, Life Span:60,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv . Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Of Concealed Type Step Light With 6W Led Lamp Die-Cast Aluminium Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs. At L70b50, Including Driver By Making Necessary Arrangement/Recess In Wall To Make It Flush With Surface ,Ip Rating : Ip 67 ,Ik10 Rated , Connecting Wire, Including Gear Box And Junction Box For Cable Connection Complete And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Thd0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70b50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-18 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -6 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (C) 50 To 100 A , Supply Of 3 Kva 3 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing Following Way Spn Sheet Steel Mcb Distribution Board Consumer Unit 240 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Hinged Front Acrylic Cover For The Mcb Knobs Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (B) 2 + 8 Way Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. B) Dp, Cat A , Supplying And Fixing Following Rating Double Pole (Single Pole And Neutral) 240 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required (A) 25 A, Cat A , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator)(C) 6 Way (8+18), Double Door, Horizontal Type Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(E) Tpn, Cat A , Supplying And Fixing Following Rating Four Pole (Triple Pole And Neutral) 415 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required (A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Isolator 2 Pole 40A, Cat A , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (C) 6 Module (200Mm X 75 Mm) Cat A , Supplying & Erecting Of Led 9 To 10W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Ip 20 Led 40W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Ip 66 Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying And Erecting Outdoor Type/Ip65 12W Ceiling-Mounted Led Downlight Having Extruded And Die Cast Aluminium Housing With High Corrosion Resistance Surface Finish With Integral Control Gear And Beam Angles - Narrow, Medium, Wide ,Complete With All Required Accessories .Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supply And Erecting Fan Hook Box ( 100 Mm Diameter Or Equivalent Square Size, 75Mm Deep) Fabricated Out Of 16 Swg Sheet Steel With 10 M Round Bar Hook Bounded To Reinforced Cement Concrete Steel Upto 50 Mm Length Protruding On Each Side Of The Box, Including Painting With 2 Coats Of Red Oxide, Complete As Required. , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Gi Pipe Medium Class 25 Mm (Civil Gsr 1034 (F)(Iii)) , Supply Of 2Kva ,1Ph In - 1Ph Out True Online Ups System In Standalone Configuration With Advance Dsp Based Technology Double Conversion Igbt Rectifier And Igbt Based Inverter Ups System With Cabinet And Smf Battery Backup For 60 Mins. Using 12V Batteries Including Battery Protection M.S Rack Suitable Dimension, Standard Rating Cable For Interlinks Cable And D.C Cable Up To Standard Length In Mtrs From Ups To Batteries Including Labour Charges For Installation Testing And Commission And Carrying Charges.(With Out Isolation Transformer)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Goa View Result →
11.
Housing Urban and Rular Development #11229363 AOC
Misc. Repairs And Other Civil Works Of Tiles, Doors, Windows,Wooden Flooring, Shed And Internal And External Painting In C.M. Bunglow Civil Line Nagpur.(Only For Society).-= 1 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand 2 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 3 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. 4 Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 1190 to 1202 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) Flooring 5 Providing and laying Vitrified MATT finishhaving decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical andconfirmingtoIS15622-2006(GroupBla)ofapprovedmakeshadeandpatternfor flooringinrequiredpositionlaidonabedofbondingchemicalfillingjointscuringand cleaning etc .complete. 6 Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 7 Providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 8 Providing and fixingTable top white wash basin of size 120x635x405mm rubber plugs and brass chain, withpillar cock, C.P.Angular stop cock long thread, continentalincluding S.S. bottle trap of approved make havingnecessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge. 9 ProvidingandapplyingTextureplasterwithfinishingwithtexturematerial ofapproved makein 3 to 4 millimeterthickness on previously plastered surface, including Plaster Groove 6mmthicknessorTapeGrooves35to45mmthicknessorasrequired,inallposition including preparing the surface, scaffolding etc. complete. 10 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box 11 Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand. 12 Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm 13 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 14 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etccomplete 15 Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete.b) Granite 16 Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. 17 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. 18 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc.as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete.Spec. No. : As directed by Engineer-in-charge. 19 Providing and fixing acrylic plastic sheet panels of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doors/windows including providing and fixing clips, putty etc. complete. (a) 2.00 mm thick. 20 Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. 21 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. 22 Removing W.C. Pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the service-able materials as and where directed includingthrowing the unserviceable materials out side etc. complete. 23 Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 24 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. 25 Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. 26 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 27 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 28 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 29 Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 30 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. 31 Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. 32 Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalentcontinental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. 33 Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. 34 Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete 35 Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. 36 Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. 37 Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipal requirement etc. complete. 38 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres 39 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. 40 Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover. 41 Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover etc. complete. 42 Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent ?make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. 43 Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete 44 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. 45 Providing and fixing crimped with G.I. mesh and size 20 mm x 20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc.complete ( excluding cost of structural steel) 46 Transportation of material obtained from debris of various sorts including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed. 5 km leadloading unloading 47 Providing , laying and fixing ,jointingEco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. 48 Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 kg) 49 Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete.Medium duty (100 kg) 50 Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaningetc. complete. (using 100% crushed sand) 51 Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards,screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. 52 Providing and fixing Shutter to wall Cupboard consisting of Teak Wood styles and Rails 25 mm thick and 75 mm wide with panel insert of 12 mm thick particle Board with one approved coloured Laminated Face on one side 1.5 mm thick, bonded with Phenol Formaldehyde Synthetic Resin including Lipping Beading. Iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). 53 Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 90 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete.(excluding painting to underside of plank). 54 Providing and fixing C.P. 2 Way BIB cock with wall flange of approvedmake including necessary sockets/ union nut etc. complete as directed by Engineer in charge. 55 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) 56 Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete 57 Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete. i)Tank capacity up to 2,000 litre. 58 Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete 59 Replacement of damaged Mortise Lock of approved quality and make to door shutter including Removing and Refixing with Necessaryscrew, making proper adjustment for smoothoperation etc. complete as per sample approved by Engineer in-chareg. 60 ProvidingHydrulic door closer .... 61 ProvidingSuper Jet Spry with flange 2 in 1 faucet 1.50 mtr long. 62 Providing Skilled plumber with tools as per direction of Engineer Incharge. 63 Providing skilled carpentor with tools as per direction of Engineer Incharge 64 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface and including scraping etc. complete. 65 Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 66 Providing and applying single coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. 67 Providing and fixing sheet glass of 24 oz. for all size including putty etc. complete 68 Providing and fixing high level 10 liter capacity with fittings inlet PVC pipe with stop tap ,brackets for fixing the cistern,32 mm dia. PVC flush pipe with fitting and clamps 20 mm dia. PVC overflow pipe with mosquito proof couplings, galvanised iron chain and pulley painting if ordered to cistern pipe etc. and cutting and making good the damaged wall and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) 69 Manualy clearing the chockes from under ground drainage line including Inspection chambers with the help of required tools for propre functioning line chamber to chamber etc. complete. 70 Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etc. complete 71 Providing curtain rod dropping with channel MAC brand of superiar quaility including all required material labour etc complete. as directed by engineer incharge......... 72 Replacement of damaged alluminium Butt Hinges of 125 mm of approved quality and maketo door shutter including removing existing the same inoriginal position making prope radjustment for smooth operation etc. complete as per sample approved by Engineer incharge. 73 Replacement of damaged Aldrop 300 mm Chromium plated of approved quality and maketo door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. 74 Replacement of damaged Tower Bolt 300 mm Chromium plated of approved quality and maketo door/window shutter including removing existing the same inoriginal position making proper adjustment for smooth operationetc.complete as per sample approved by Engineer in-charge. 75 ProvidingHandle 150 mm Chromium plated (Rounded shape). 76 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixedwithapprovedwaterproofingcompound.Markingfinishedsurfacewithfalse squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for requiredheight,withdripmouldatthejunctionofplasterandparapetandcuringand covering10yearsGuaranteeagainstleakproofnessonCourtfeestamppaperofRs.500/- including ponding test etc. complete. 77 Providing and injecting epoxy grout including structuring of crack in the body of slab girder by sand blasting, fixing inlet tube arrangement including cost of materials, machinery required for the work and labour charges etc. complete. 78 Providing & fixing Decorative wall paper superior quality including adhesive to fix at wall etc complete. as directed by engineer incharge......... 79 Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) 80 Providing & fixing Mica laminate as per ISI 0.1 mm thick etc complete...... 81 Providing & fixing 19 mm plywood 710 bwp full red core with report etc complete...... 82 Providing & fixing 12 mm plywood 710 bwp full red core with report etc complete...... 83 Providing & fixing teak wood batterns 50x25 mm etc complete...... 84 Providing & fixing plain glass 6 mmetc complete...... 85 Providing & fixing teak wood batterns 70x45 mm etc complete...... 86 Providing & fixing door stopper etc complete...... 87 Manualy clearing by removeing the chockes from Nahni Trap, Gully Trap, Wash basin unit, Sink and WC with the help of required tools for proper functioning the same etc. complete. 88 Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. 89 Providing and Laying wearing laminate wooden or eqiuvalent flooring 8 mm thick in attractive strips for conference hall. 90 Providing, laying andfixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 kg/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring. 91 Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. 92 Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with allnecessaryfixturesandfittingetc.complete.(SampletobefinalbyEngineerIn-charge prior execution of work) 93 Providing and applying French polish for required finish on previously polished wood including knotting, preparing the surfaces, scaffolding etc. complete as directed 94 Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary. 95 Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 96 Providing and fixing C.P. sink cock with raised J shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete. 97 Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete. 98 Providingandlayingtelephoneblack/AmbaWhite/Cadburybrown/Rubyred/Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,etc. complete. 99 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. 100 BASIC TEST OF CEMENT :-Standerd Consistancy Fineness, Specific Graviti, Setting Time (Initial & final, Compressive Strength, Soundness. 101 BASIC TEST OF BRICK :-Water Absorption, (Set of 5 Brick), Comoressive Strength (Set of 5 Blocks), Efflorescence (Set of 5 Bricks) 102 CERAMIC TILES/ VITRIFIED TILES :- Water Absorption, Modules of Rapture (Set of 6 Tiles) 103 BASIC TEST OF C. C. TILES. :-Flexural test(Set of 6 tiles) Water Absorption,(Set of 6 tiles) Resistance to wear(Set of 6 tiles). 104 BASIC TEST OF Fine Aggregate Fineness Modulus (Sieve Analysis) silt and cley content..... 105 BASIC TEST OF Concrete Paving Block :- Compressive strength, Water Absorption, (Set of 8 Blocks ) 106 BASIC TEST OF STONE / RUBBLE/ Crushing Value/Compressive strengh, Water 107 Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction materials for whichroyalty is necessary.(Royalty charges will be paid to contractor after sumbitting valid documents of revenue authority)Royalty for naturalSand (Royalty + Surcharges 2% & Distt. mineral foundation cess 10%)
Contract Date: Jun 04, 2026 Contract Value : ₹ 15.18 Lakh
Government Departments No of Bidders 2
Maharashtra View Result →
12.
Educational and Research Institute #11223212 Technical Bid
Tender For Supply And Fixing Of Mechanical Engineering Research Laboratory Furniture(Rp-157) Of New Academic Block At Smvd University, Kakryal, Katra , Research Lab, Mechanical Engineering, Smvd University Katra , Table For Cabin - Providing And Placing Of Main Table With Overall Size Of Table Shall Be 1500 Width Mm X 750 Depth Mm X 740 Height Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 660Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. Dimensions Tolerance + 20 Mm. , Table For Faculty Cabin - Providing And Placing Of Main Table With Overall Size Of Table Shall Be 2000 Width Mm X 750 Depth Mm X 740 Height Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 660Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor.Dimensions Tolerance + 20 Mm. , Chair For Cabin & Faculty Rooms - Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing Medium Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Malaysian Plywood With Hr Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Double Layered Malaysian Moulded Hot Pressed Plywood (12+6)Mm Thick With Hr Polyurethane Foam 30Mm Thick Having Density 32Kg/M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm. Seat And Back Shall Be Joined With Hr Steel Sheet. The Armrest Shall Be Used Pp Arm Fixed Type Completely Joint With Seat. The Chair Shall Have Synchro Knee Tilt Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustable 100Mm With Bifma Standard Class-3 Gaslift. The Pedestal Shall Be Made Up Of Injection Moulded Black Nylon Having Pitch Circle Dia 700 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self Lubricating Property For Friction Free Movemen With Bifma Standards. The Seat Size Shall Be 480±10Mm(W) X 495±10Mm(D) And Back Size Shall Be 590±10Mm(H) From Seat & Overall Height = 1030±10Mm. Dimensions Tolerance + 20 Mm. , Executive Table For Cabin 3 - Supplying & Installing Of Table With Eru And Pedestal Having Following Specifications. The Table Shall Be Supplied In Completely Knock Down Conditions With An Overall Size W1800 X D1800 X H750mm That Is To Be Assembled At Site. The Worktop Shall Have The Size 1800 X 900Mm Made Up Of 50Mm Thick Plpb With Approved Laminate And Finish As Per Approved Shade. The Top Edge Should Cladded With 1.2Mm Thick Extruded Aluminium Section All Around The Worktop And Die Cast End Caps On Joints For Better Strength Of The Table. The Profile Shall Be In Rectangle Shape And Enclosed By Flapper Box For Electric Provision. The Top Shall Be Supported On Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be 50Mm Thick Medium Density Fibre-Board Linear In Profile And The Edges Cladd With Extruded Aluminium Profile. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Particle Board And Shall Be Linear In Profile. The Table Shall Be Supplied With Credenza Unit With An Overall Size 900Mm X 450Mmmm That Shall Be Constructed From Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With 25Mm Thick Top And Other Parts 18Mm Thick Like Shutter, Back, Facia Etc. The Drawer And Shutter Shall Be Operated With Ball Bearing Sliding Channel And Concealed Crank Hinge. G-Profile Aluminium Handle Shall Be Supplied For Ease Of Opening. The Eru Unit Shall Be Mounted On 38Mm Dia. Leg. Fixed Pedestal Shall Be Supplied With An Overall Size 380Mm X 400Mm X 600Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Top Shall Be 25Mm Thick, Side, Back, Facia Shall Be 18Mm Thick. The Pedestal Shall Have 2 Nos. Of Drawer Having Same. The Drawer Shall Be Operated With Ball Bearing Sliding Channel To Enable Smooth Operation. Aluminium Handle Shall Be Provided For Ease Of Opening. For Locking Provision Central Lock Mechanism Shall Be Given In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted On Aluminium Round Leg. Dimensions Tolerance + 20 Mm. , Executive Chair For Cabin 3- Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50+25+30)Mm Thick Having Density (40, 32 & 32)Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Hydraulic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 710±10 Mm(H) From Seat. Overall Height Shall Be = 1170±10 Mm & Overall Width/Depth = 740±10 Mm.. Dimensions Tolerance + 20 Mm. , Visitor Chair For Cabin 3 - Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50+25+30)Mm Thick Having Density (40, 32 & 32)Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Powder Coated 50-60? (Dft) Thick Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 480±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 520±10 Mm(W) X 580±10 Mm(H) From Seat. Overall Height Shall Be = 1030±10 Mm, Overall Depth = 620±10 Mm & Overall Width = 620±10 Mm. Dimensions Tolerance + 20 Mm. , 2-Seater Sofa For Cabin 3 - Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm & Overall Height = 800±10 Mm. Dimensions Tolerance + 20 Mm. , Centre Table For Cabin 3 - Providing And Supplying Centre Table With An Overall Size 1200Mm X 600Mm X 430Mm. The Top And Side Cladding Shall Be Made Up Of 36Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. Extruded Aluminium Section Shall Be Inserted Within Side Corner Edge At Both Side Of The Table. There Shall Be Leveller Shoe Provided At The Bottom. Dimensions Tolerance + 20 Mm. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso: 9001, Iso:50001, Iso:14001 & Iso: 45001 By Nabcb, Bifma Membership, Aiota & Greenguard Certification Has To Be Submitted. , Corner Table For Cabin 3 - Providing And Supplying Centre Table With An Overall Size 600Mm X 600Mm X 430Mm. The Top And Side Cladding Shall Be Made Up Of 36Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. Extruded Aluminium Section Shall Be Inserted Within Side Corner Edge At Both Side Of The Table. There Shall Be Leveller Shoe Provided At The Bottom. Dimensions Tolerance + 20 Mm. , Wooden Almirah For Cabin Faculty Room & Hall - Supplying & Placing Storage Unit With An Overall Size 900Mm X 450Mm X 2000Mm. Storage Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 3 Nos. Of Adjustable Shelf And 1 Fixed Shelf. 2 Normal Shutter And 2 Glass Shutter Shall Be Provided For Closing And Opening The Shutter. The Glass Shutter Shall Be Made 4Mm Clear Glass Insert Within Aluminium Profile. The Shutter Shall Be Operated With Concealed Crank Hinge With Ss Handle As Well As Mp Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. Dimensions Tolerance + 20 Mm. , Steel Almirah For Cabin Faculty Room & Hall - Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. All Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. Dimensions Tolerance + 20 Mm. , Steel Bookcase For Cabin & Faculty Room - Providing And Supplying Metal Book Case With An Overall Size 915 Mm (W) X 320 Mm (D) X 1750Mm (H). The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. All Components Shall Be Made Of 0.8Mm High Yield Strength Crca Sheet Of Grade ‘D Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure.Dimensions Tolerance + 20 Mm. , Visitor Chair For Cabin & Faculty Rooms - Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support With The Assistance Of Cushion. The Armrest Shall Be Cushion Arm With Leatherite Covering. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Circular Pipe Having Dia. 28.6Mm. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Seat Size Shall Be 480±10 Mm(W) X 460±10 Mm(D) And Back Size Shall Be 460±10 Mm(W) X 580±10 Mm(H) From Seat & Overall Height = 1020±10 Mm, Overall Width = 610±10 Mm & Overall Depth = 670±10 Mm. Dimensions Tolerance + 20 Mm. , Modular Conference Table - Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size 2400Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Have Same Size Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With One Side Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. Single Sided Flapper Box Shall Be Enclosed At Table Top That Houses Video, Audio, Data And Power Connection Discretely. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Have The Size 900Mm X 570Mm. The Gable End Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Be Supported On Ss Pipe Leg 202 Grade. It Shall Have Cross Section Area 80Mm X 20Mm. There Shall Be Buffers Provided To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. Table Shall Be Provide A Flip Up/ Pop Up Box (Without Wires) 01 No. Dimensions Tolerance + 20 Mm. , Main Chair For Conference Table - Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of Natural Wood And Combination Of (18+6)Mm Thick Double Layered Moulded Commercial Plywood Padded With High Resilience Polyurethane Foam 70Mm Thick Having Density 40Kg/M³ In Seat And 70Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Chrome Cushion Arm With Leatherite Covering Top Pivot Joint With Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded Polypropylene With Chrome Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 500±10 Mm(W) X 720±10 Mm(H) From Seat. Overall Height Shall Be = 1180±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 710±10 Mm. Dimensions Tolerance + 20 Mm. , Chairs For Conference Table - Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of Natural Wood And Combination Of (18+6)Mm Thick Double Layered Moulded Commercial Plywood Padded With High Resilience Polyurethane Foam 70Mm Thick Having Density 40Kg/M³ In Seat And 70Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support. The Chair Shall Be Supplied With Polypropylene Chrome Cushion Arm With Leatherite Covering Top Pivot Joint With Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded Polypropylene With Chrome Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 500±10 Mm(W) X 520±10 Mm(H) From Seat. Overall Height Shall Be = 980±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 710±10 Mm. Dimensions Tolerance + 20 Mm. , Discussion Table- Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size Dia. 900Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Circular Shape And The Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding. The Table Understructure Shall Be A Combination Of Ms Powder Coated And Pre-Laminated Particle Board. There Shall Shoe Provided At The Base To Avoid Scratches On The Floor. Table Shall Be Provide A Flip Up/ Pop Up Box (Without Wires) 01 No. Dimensions Tolerance + 20 Mm. , Chair For Discussion Table - Supplying And Placing Lounge Chair. The Seat Shall Be Made Of 12 Mm Thick Hot Pressed Plywood Upholstered With High Resiliance Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ With Leatherite Tapestry 0.8Mm Thick 535 Gsm And The Back Shall Be Made Of Wooden Frame Upholstered With High Resiliance Moulded Polyurethane Foam 25Mm Thick Having Density 32Kg/M³ With Leatherite Tapestry 0.8Mm Thick 535Gsm. The Frame Structure Shall Be 4 Legs Support Type Made Up Of Reducing Pipe Frame Powder Coated Tubular Pipe Having Cross-Section Area Dai 19Mm Thick. The Seat Size Shall Be 430±10 Mm (D) X 450±10 Mm (W) And Back Size Shall Be 500±10 Mm (W) X 400±10 Mm (Ht) From Seat. Overall Height Shall Be = 840±10 Mm, Overall Depth = 540±10 Mm & Overall Width = 580±10 Mm. Dimensions Tolerance + 20 Mm. , Modular Workstation For Hall - Supplying & Placing Modular Workstation In Completely Knock Down Conditions With Size :- W1200 X D600 X H750/1200Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure. The Worktop Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Re Lam Particle Board With Laminate And Sealed With 2Mm Thick Pvc Edge Banding. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Plpn. Partition :- 60Mm Thick Panel Based Partition Of Height 1200Mm Having Provision Of Fabric / Soft Pin Up Board/ Laminate / Race Way. Worktop :- 25Mm Thick Plpb Board With Pvc Edge Banding. All Aluminum Parts Shall Be Pretreated And Duly Powder Coated Of 40?-50? Thick. Raceway Shall Be Provided Of Aluminum Below The Work Top As Per Requirement For Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Curve Trims. The Trims Shall Be Made Of Aluminum Extrusions Of Size 60X19mm With 1.5Mm Thick And Should Be Covered With Die Cast End Caps On Joints, 2 Ways, 3 Ways & 4 Ways Caps As Required. Wire Management Partition Shall Have Concealed Wire Management Capabilities And Shall Be Engineered For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cutouts Shall Be Provided On Raceways To Fix All Electrical And Data Points. Mobile Pedestal :- (2D + 1F) 18Mm Thick Plpb Board With Pvc Edge Banding, Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. A Nylon Castor Based Cpu Unit Shall Be Provided With 18Mm Thick Plpb. Dimensions Tolerance + 20 Mm. , Chair For Workstations - Providing And Supplying Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ With Foam Net Tapestry 0.9Mm Thick And 300 Gsm And The Back Shall Be Made Of Injection Moulded Polypropylene Net Cover Upholstered With Breathable Mesh Tapestry. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine With Adjustable Lumbar Support. The Chair Shall Be Supplied With Injection Moulded Pu Adjustable Arm Completely Joint With Seat. For Seating Durability The Chair Shall Have Actice Bio-Synchro Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Beinjection Moulded In 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 520±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 495±10 Mm(W) X 610±10(H) From Seat & Overall Height = 1010±10 Mm. Dimensions Tolerance + 20 Mm. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso: 9001, Iso:50001, Iso:14001 & Iso: 45001 By Nabcb, Bifma Membership, Aiota & Greenguard Certification Has To Be Submitted. , 2 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 2 Locker Unit. Each Locker Shall Have 1 Nos. Of Hanging Rod. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , 3 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 3 Locker Unit. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , 4 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 4 Locker Unit. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , Lab Over Head Unit- Providing And Fixing Lab Over Head Unit With Overall Dimensions 750(W)Mm X 320(D)Mm X 675Mm(H). Over Head Unit Shall Be Welded Body With Load Bearing Members Such As Top, Bottom And Stiffeners Made Of 0.8Mm Thick Crca Sheet. The Storage Unit Shall Be Provided With A Shelf Made Of 0.8Mm Thick Crca Sheet. Each Shelf Shall Have Load Carrying Capacity Of 30-40 Kgs. Mp With 180 Degree Cam Lock. Semi Recessed Handle And Ss Hinge. Shutter Shall Be Provided With A Mp Lock. , Laboratory Lab Stools- Providing And Placing In Position Ht. Adjustable Stool With Back. The Seat Shall Be Made Up Of 1.2±0.1Cm Thick Flat Plywood And With Moulded Polyurethane Foam And Are Upholstered With Replaceable Synthetic Leather Covers. The Dimensions Of Seat Shall Be Diameter 40.0 Cm And Adjustments Are 360° Revolving Type. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Upholstery Shall Be Available In Synthetic Leather. The Dimensions Of Back Shall Be 45.0 Cm (W) Covered With Polyurethane Foam. The Hr Polyurethane Foam Shall Be Moulded With Density = 40 +/-2 Kg/M3. The Five-Prong Pedestal Shall Be Fabricated From 0.2 ± 0.02 Cm Thick Hr Sheet ( Is : Dd 1079/ Hr ), Powder Coated ( Dft 40-60 Microns ). The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Dimensions Tolerance ±20 Mm.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Jammu And Kashmir View Result →
13.
Defence #11191230 Technical Bid
Tender for Providing of Bore Wells (QTY-02 Nos) Alongwith Connected Items for otm Accn at Para sf Site in Niwaru mil stn Under ge Jaipur-1.00 Boring / Drilling Trial bore holes of 200 mm diameter bore in all kinds of soils, unconsolidated & semi-consolidated formations, Sandy soil formation, rocks by using suitable method by direct rotary Rig method upto 200 metre depth below ground level in any type of soil rock/ hard rock / loose boulders with sand including collection of strata samples in transparent polybags @ 3m or whenever there is any change in strata, selection of site for boring by standard method/ practice disposal of materials obtained (sand, soil, boulders, etc) from boring to distance not exceeding 50 metre including complete in all respects with all labour, materials, tools and tackles, equipments, rig, etc. all as specified in IS : 2800 and as directed by Engr-in-charge complete all as specified and directed. 2.00 Widening / Reaming of bore well from 200mm to 500 mm drilling using suitable method by reverse rig method or auguring by hammering or any other suitable drilling method or any approved method at site below ground level in any kind of soil strata incl hard stone/boulder complete all as specified in IS : 2800 and directed. 3.00 Supply fixing and lowering bail plug, suitable for 200 mm bore plain pipe thickness 8 mm complete including welding and painting of pipes complete all as specified and directed. 4.00 Supplying and lowering in the bore hole ERW MS pipe 200 mm Internal Dia, 8mm thick slotted pipe having slots of 1.59 mm wide 3 long IS-8110 as laid down and with all necessary fittings and painting of pipe with two coats of anti corrosive approved paint on outside surface of pipe before lowering including supplying all labour, equipments and materials all around welded with 3 Nos stiffeners of flat iron 40 x 6 mm, 300 mm long complete as per IS and specified and directed. Note:- Location and length of the strainer pipe shall be as per electro logging result. 5.00 Supplying and lowering in the bore hole, the ERW MS pipe plain assembly MS casing pipe Fe 410 and Fe 450 grade steel as per IS-4270 and nominal bore of pipe 200 mm Internal Dia & 216 mm Outer Dia and wall thickness of 8 mm including welding of pipe at site with two coats of approved anti-corrosive paint on outer faces of the pipe and specials including supply of all labour, equipments and materials all around welded with 3 Nos stiffeners of flat iron 40 x 6 mm, 300 mm long complete all as specified and directed. 6.00 Supply of Pea gravel size ranging from 5mm to 12 mm. All gravel shall consist of hard well rounded particles reasonably uniform with uniformity coefficient of less than 2 including packing in the annular space between casing pipe & drilled bore complete all as specified and directed 7.00 M & L for Development of bore wells including flushing out tree roots, silt, fine sand by air compressor and subsequently by a vertical turbine pump of suitable capacity not less than 450 CFM at 150 PSI & over pumping (25% extra capacity pump) to make water free from turbidity till the bore well yields sand and silt free clear water is obtained from bore well complete all as specified and directed 8.00 M & L for electro logging by means of electric logger of the complete tube well of 500 mm bore and submission of report along with its interpretations by GWM scientist complete all as specified and directed by Engineer-in-Charge.9.00 M & L for Yield test of bore well after completion of development of bore well by V notch method or any method of compressor or by pumping as required complete all as per IS and as directed. Note: Necessary equipment such as collection V notch, water collection Tank, motor pump set for testing for yield test shall be arranged by the contractor. The cost of the same shall deemed to be included with unit rate of item. 10.00 Supply, lowering, testing and commissioning of Submersible pump and motor as per IS-9283 (latest), for a long and trouble-free life, corrosion and abrasion-resistant parts, pumping capacity/discharge of pump 350 L /Min to 500 L /min, at respective head 220 m-190 m, multistage, outlet size 80 mm, Sand Fighter designs - Innovative Sand Fighter Designs restrict the entry of sand in motors, protect the pump and motor bushes to perform well in sandy bore wells, and increase the pump set life, Dynamically Balanced Rotating Parts - Minimum vibrations protect components from damage during operation, resulting inconsistent performance as concentricity is maintained, Longer and Trouble-Free Life - High-grade engineering materials like Graded Cast Iron Components, Stainless Steel Shaft, Noryl Impellers, Bronze Bushes, Heavy duty Carbon + SS Thrust Plate, 99.9% Electro Grade Copper Rotor and Winding Wires for longer and trouble-free life complete all as specified and directed 11.00 S&F 10 Sqmm X 3 Core Flat Submersible Cable as per IS:694/1990 with multi-stranded copper conductor 1100 volts grade heavy duty including all accessories for connection pump from panel board, testing and commissioning complete all as specified and directed. 12.00 S&F heavy duty galvanised iron column pipe of size 80 mm dia 3 metre long both end flanged, welded suitable for submersible pump having suitable cuts for passing through submersible cable including nuts, bolts & rubber gasket complete all as specified and directed by Engineer-in-Charge.13.00 Supply and erection of housing clamp fabricated out of MS flat iron bend to shape 50 mm x 80 mm thick including nuts , bolts and washers as per IS-2800.14.00 M & L for Construction of foundation of tube well of size 1.00 m x 1.00 m having 0.5 m thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) over 75 mm thick PCC 1:3:6 type C-2 with GI Pipe 80mm dia medium grade 4 Nos embedded through out the block with GI plug and socket fixed on end and all as directed.15.00 Supply, erection, testing and commissioning of pressure gauge (0 to 10.6 kg/sqcm) complete with needle valve and connection pipe complete all as specified and directed. 16.00 M & L for Strata sample wooden box made of deodar wood with glazed shutter and pigeon hole for every three metre depth including marking complete all as specified and directed by Engineer-in-Charge.17.00 M&L for Testing of water from approved Govt Lab for potability by doing chemical analysis as per norms of WHO and submitting of test reports to the entire satisfaction of Engineer-in-Charge.18.00 M&L for preparation & installation of strata chart of ground data showing different type of strata and selection of casing pipe on good quality Rig sheet paper, duly framed with glazed front side size of chart paper ( 80 cm x 30 cm) complete all as specified and directed by Engineer-in-Charge.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
Rajasthan View Result →
14.
Rural Development #11180993 AOC
Jet Pump Monoblock Pump Bare Pump Underwater Pump Vtpump India Mark - 2 And Mark - 3 Hand Pump Repairing And Spare Parts Rate For Zilha Parishad Bhandara , Jet Pump,Monoblock Pump, Bare Pump Underwater Pum All Submit Rate As Pergsda-Item Sheet , India Mark -2 & 3 Hand Pump Repairing Drive Out Thepipe Line With Diameter Of 65.0 M.M. , Drive Outthepipe Line With Diameter Of 65.0 M.M Which Fell In Well. , Drive Out Thepipe Line With Diameter Of 32.0 M.M From Whichfell In Well. , Drive Out Thepipe Line With Diameter Of 32.0 M.M From Well. , Repairing Of Jet Motor Pump & Pipelinedrive Out Inner Pipeline With Jet Assembly Of Jetpump From 1.0 Hp To 5.0 Hp Well. , To Fit The Inner And Outer Pipeline Of The Jet Pump In 1.0 Hp To5.0 Hp Well. , To Insert Inner Pipeline Of Jetpump In Well. (After Repairing.) , To Insert Inner & Outer Pipeline Of Jetpump In Well. (After Repairing.) , To Pull Out The Stucked, Fell Or Caught In Dreg Pump Set.( Contracter Use Their Own Tools.) , To Increse Or Reduse The Pipe Line Of Jet Pump Inh Well. ( For Every 3.0 M. ) , To Submit In The Officejet Pump, Motor Pipeline, Starter Panel Board Tin & Other Assesaries Of Laghu Panee Purwatha Yojna In Well. , New Pump Set (Upto 1.0 To 5.0 Hp) To Fit In Well, To Give Panel Wiring Arthig Test Report & Start After Electric Supply. (Z.P. Providespumpset Panel, Arthing Material G.I. Wire, Plate, Pipe Andother Assesaries.) , To Drive Out Motor And Pump From Jet Pump , To Fit1.0 Hp To 5.0 Hp Jet Motor Pump. , To Rewinding Electric Motor With Copper Wire , Above Rate Valid Forwithout Returning Old Copper Wire, 1.0 Hp To 5.0 Hp Open Pump Motor Rewinding. , To Open The Jet Motor, Over Oiling, Fitting And Testing , Roter Pump Shaft Turning And Polishing. , To Make Upper And Lower Bush Of Baring Cover Sit And Housing Of Jet Pump. , To Test Electric Pump On Site ( Transport And With Minor Repairing) , To Repaire Panel Board & Starter Of All Types Motor & Any Hp Control Panel Starter Minor Repairing To Fit Grif Set, Rottery Swich, Contracter Plate, Ampear Meter, Volt Meter, On-Off Switch, Fuse And Minor Wiring. , Starter Panel Board Main Repairing & To Fit Coilrelay, Single Phasing Preventer Water Label Guard & Totle Wiring Of 1.0 Hp To 10.0 Hp Pump. , Starter Panel Board Main Repairing & To Fit Coilrelay, Single Phasing , Preventer Water Label Guard & Totle Wiring Of 10.0 Hp To 30 Hp Pump. , Preventer Water Label Guard & Totle Wiring Of 31.0 Hp To 40 Hp Pump. , To Remove Tin Shed Flashing Of Pump If Necessary And Fit As It Is After Work. , To Remove Handpump With Pipeline For Flashing And Insert 10 Feet G.I.Pipeline Towards 32 M.M. Dimeter& Remove After Flashing And Fithandpump As It Is Before. , To Remove Handpump For Capacity Test And After Testing Fit As It Is Before. , Single Phase 1 Hp To 2 Hp Electric Pump Capacity Test For Regular Three Hour With Help Of Generator , Yieldtest 1 Hp To 2 Hp Electric Pump Capacity Test For Regular Three Hour With Help Of Generatorwith Necc Equip , Yieldtest 2 Hp To5 Hp Electric Pump Capacity Test For Regular Three Hour With Help Of Generatorwith Necc Equip , Yield Test 2 Hp To5 Hp Electric Pump Capacity Test For Regular Three Hour Withouthelpof Generatorwith Necc Equip , Spare Parts Of Jet Pump Baring Upper , Baring Lower , Empelor Key , Pump Bush , Air Fan ( With Pvc Pin) , Stand Nut Kit , Nut Bolt Kit , Air Cock , Pressure Regulating Volve , Pressure Regulating Difrom , Baring Plate Top / Bottom , Jet Assembly Packer Type Full , Packer Foot Volve , Packer Rubber Seal Set , Packer Backet Set , Gland Rope , Rubber Packing Set , Gland Rope Plate , Empelor , D) Other Material G. I. Coplling Heavy Duty , I) 32 M.M. , Ii) 40 M.M. , Iii) 50 M.M. , Iv) 65 M.M. , V) 75 M.M. , Vi) 100 M.M. , Vii) 125 M.M. , Viii) 150 M.M. , Bend Heavy Duty , I) 32 M.M. , Ii) 40 M.M. , Iii) 50 M.M. , Iv) 65 M.M. , V) 75 M.M. , Vi) 100 M.M. , Vii) 125 M.M. , Viii) 150 M.M. , 3) Foot Volve:I) 32 M.M. , Ii) 40 M.M. , Iii) 50 M.M. , Iv) 65 M.M. , V) 75 M.M. , Vi) 100 M.M. , Vii) 125 M.M. , Viii) 150 M.M. , Wooden Board 3 X 2 F X ½ “ , Iron Box 18 Guage Tin 3F X 2F X 1F , G.I.Pipe 1½“ / 1¼ “ Cutting Threding , G.I.Pipe 2“ Cutting Threding , G.I.Pipe 2½“ / 3 “ Cutting Threding , E)Submercible Pump Repairing: 1.0 Hp To 3.5 Hp , 4.0 Hp To 5.0 Hp , 6.0 Hp To 10.0 Hp , 11.0 Hp To 15.0 Hp , 16.0 Hp To 20.0 Hp , 21.0 Hp To 30.0 Hp , 31.0 Hp To 50.0 Hp , F) To Remove Motor Pump Set With Pipelinefrom Well: 1 Hp To 6.0 Hp , 7.0 Hp To 15 Hp , 16.0 Hp To 30.0 Hp , 31.0 Hp To 50.0 Hp , G) To Pull Out The Stuck, Fell Or Caught In Dreg Pump Set With Pipelinefrom Well: 1 Hp To 6.0 Hp , 2) 7.0 Hp To 15 Hp , 3)16.0 Hp To 30.0 Hp , 4)31.0 Hp To 50.0 Hp , H) To Fit Motor Pump In Well With Pipe Line: 1)1 Hp To 6.0 Hp , 2)7.0 Hp To 15 Hp , 3) 16.0 Hp To 30.0 Hp , 4) 31.0 Hp To 50.0 Hp , I) To Increase Or Reduse Pipeline Of Submercible Pump In Well Rate 3 Meter / Per Pipe: 1 Hp To 6.0 Hp , 7.0 Hp To 15 Hp , 16.0 Hp To 30.0 Hp , 31.0 Hp To 50.0 Hp , J) To Submit In The Officejet Pump, : 1 Hp To 7.5 Hp , 8.5 Hp To 15 Hp , 16.0 Hp To 30.0 Hp , 31.0 Hp To 50.0 Hp , K) New Pump Set (Upto 1.0 To 5.0 Hp) :1 Hp To 7.5 Hp , 8.5 Hp To 15 Hp , 16.0 Hp To 30.0 Hp , 31.0 Hp To 50.0 Hp , L) To Open Sub Motor, Repairing, Fitting And Testing.: 1 Hp To 7.5 Hp , 8.5 Hp To 15 Hp , 16.0 Hp To 30.0 Hp , 31.0 Hp To 50.0 Hp , M) To Open Sub Pump, Repairing, Fitting And Testing.:1)1 Hp To 7.5 Hp , 2) 8.5 Hp To 15 Hp , 3)16.0 Hp To 30.0 Hp , 4)31.0 Hp To 50.0 Hp , N) To Repaire Sub Motor And Sub Pump:To Sub Motor / Pump Bush Fitting Per , Damage Stater Repairing , Roter Shaft Turning And Polishing , Damage Roter Repairing (Rewinding) , Sub Pump Shaft Turning & Polishing , To Joint Cable With Kit , O) Sub Motor & Sub Pump Spare Parts1 To 5 Hp: I) Sub Motor Bush , Ii) Sub Pump Bush , Thirst Baring Block , Thirst Baring Full , Block , Ring , Upper Stage Casing , Lower Stage Casing , Middle Stage Casing , I) Empelor , Ii) Brass Empelor , Nekring , Defuser , Pump Key , Rubber Parts Kit , Submotor Base , Stenner , Male- Female Bush , Male- Famale Key , Nrv Stage Casing , Stud Big , Stud Small , Motor Bush Housing , I) Upper , Ii) Lower , Alen Srew , Ss Slivemotor /Pump , Ss Slive Cover , O) Sub Motor & Sub Pump Spare Parts1 To 7.5 Hp: I) Sub Motor Bush , Ii) Sub Pump Bush , Thirst Baring Block , Thirst Baring Full , Block , Ring , Upper Stage Casing , Lower Stage Casing , Middle Stage Casing , I) Empelor , Ii) Brass Empelor , Nekring , Defuser , Pump Key , Rubber Parts Kit , Submotor Base , Stenner , Male- Female Bush , Male- Famale Key , Nrv Stage Casing , Stud Big , Stud Small , Motor Bush Housing , I) Upper , Ii) Lower , Alen Srew , Ss Slivemotor /Pump , Ss Slive Cover , O) Sub Motor & Sub Pump Spare Parts 8 To15 Hp :I) Sub Motor Bush , Ii) Sub Pump Bush , Thirst Baring Block , Thirst Baring Full , Block , Ring , Upper Stage Casing , Lower Stage Casing , Middle Stage Casing , I) Empelor , Ii) Brass Empelor , Nekring , Defuser , Pump Key , Rubber Parts Kit , Submotor Base , Stenner , Male- Female Bush , Male- Famale Key , Nrv Stage Casing , Stud Big , Stud Small , Motor Bush Housing , I) Upper , Ii) Lower , Alen Srew , Ss Slivemotor /Pump , Ss Slive Cover , O) Sub Motor & Sub Pump Spare Parts16 To30 Hp: I) Sub Motor Bush , Ii) Sub Pump Bush , Thirst Baring Block , Thirst Baring Full , Block , Ring , Upper Stage Casing , Lower Stage Casing , Middle Stage Casing , I) Empelor , Ii) Brass Empelor , Nekring , Defuser , Pump Key , Rubber Parts Kit , Submotor Base , Stenner , Male- Female Bush , Male- Famale Key , Nrv Stage Casing , Stud Big , Stud Small , Motor Bush Housing , I) Upper , Ii) Lower , Alen Srew , Ss Slivemotor /Pump , Ss Slive Cover , 1)Three Ply Coreflat Flexible Submercible Cable: I) 1.5 Sq.M.M. , Ii) 2.5 Sq.M.M. , Iii) 4 Sq.M.M. , Iv) 6 Sq.M.M. , V) 10 Sq.M.M. , Vi) 1.5 Sq.M.M. , 1)Three Ply Coreflat : Arm Cable:I) 1.00 Sq.M.M. , Ii) 1.50 Sq.M.M. , Iii) 2.50 Sq.M.M. , Iv) 4.00 Sq.M.M. , V) 6.00 Sq.M.M. , Vi) 10.00 Sq.M.M. , Vii) 16.00 Sq.M.M. , Viii) 25.00 Sq.M.M. , Ix) 35.00 Sq.M.M. , X) 50.00 Sq.M.M. , Copper Wire P.V.C. Insulated & P.V.C. Coated: I) 3/20 , Copper Wire P.V.C. Insulated & P.V.C. Coated: Ii) 7/20 , Copper Wire P.V.C. Insulated & P.V.C. Coated: Iii) 7/16 , 27)New Pump Shaft I) 1.5 Hp To 6 Hp , 27)New Pump Shaft Ii) 7.5 Hp To 15 Hp , 27)New Pump Shaft Iii) 16 Hp To 30 Hp , Borewell Protecting Plate , Borewell Protecting Cover , P)25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing 25Hp: Drive Out V.T. Motor From Well , V.T. Pump Fit In Well , Drive Out Colume Assembly With Pipeline From Well , To Fit Colume Assembly With Pipeline In Well , To Open V.T. Motor , V.T. Motor Fitting & Testing , Bowl Assembly Fitting & Testing , To Open Bowl Assembly , V.T. Pump Rewinding With Copper Wire. Withoutreturning Old Copper Wire , Allignment Checking & Repairing , I) Line Shaft , Ii) Colume Pipe , Iii) Oil Tube , Cutting & Threading , I) Line Shaft (R.H./L.H) , Ii) Colume Pipe (R.H./L.H) , Iii) Oil Tube (R.H./L.H) , To Fit New Flage, Threading Coller, Welding,Nutboltin Colume Pipe , To Making ,Bearing Sheet On Lathe Machine , Bearing Plate Both Side , P)25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing 35Hp: Drive Out V.T. Motor From Well , V.T. Pump Fit In Well , Drive Out Colume Assembly With Pipeline From Well , To Fit Colume Assembly With Pipeline In Well , To Open V.T. Motor , V.T. Motor Fitting & Testing , Bowl Assembly Fitting & Testing , To Open Bowl Assembly , V.T. Pump Rewinding With Copper Wire. Withoutreturning Old Copper Wire , Allignment Checking & Repairing , I) Line Shaft , Ii) Colume Pipe , Iii) Oil Tube , Cutting & Threading , I) Line Shaft (R.H./L.H) , Ii) Colume Pipe (R.H./L.H) , Iii) Oil Tube (R.H./L.H) , To Fit New Flage, Threading Coller, Welding,Nutboltin Colume Pipe , To Making ,Bearing Sheet On Lathe Machine , Bearing Plate Both Side , P)25.0 Hp To 40 Hp V.T. Motor Pump Set Repairing 40Hp : Drive Out V.T. Motor From Well , V.T. Pump Fit In Well , Drive Out Colume Assembly With Pipeline From Well , To Fit Colume Assembly With Pipeline In Well , To Open V.T. Motor , V.T. Motor Fitting & Testing , Bowl Assembly Fitting & Testing , To Open Bowl Assembly , V.T. Pump Rewinding With Copper Wire. Withoutreturning Old Copper Wire , Allignment Checking & Repairing , I) Line Shaft , Ii) Colume Pipe , Iii) Oil Tube , Cutting & Threading , I) Line Shaft (R.H./L.H) , Ii) Colume Pipe (R.H./L.H) , Iii) Oil Tube (R.H./L.H) , To Fit New Flage, Threading Coller, Welding,Nutboltin Colume Pipe , To Making ,Bearing Sheet On Lathe Machine , Bearing Plate Both Side , Q)25 Hp To 40 Hp V.T. Pum Spare Part 25Hp : 1) V.T. Motor Baring , I) Upper , Ii) Lower , Discharge & Sectioncase Baring Bush Gun Metal , Water Seal (Oil Water Separater) , Line Shaft , Oil Tube , T.T. Plate Cast Iron , Brain Rubber Bush (Spider) , Net (Cast Iron) , Nut Bolt ¾“ X 2 “ , Nut Bolt ¾“ X 6 “ , Rubber Shit , T.T. Plate Bush , Neck Ring (Gun Metal) , Impelor(Gun Metal) , Browl Assembly Casing , 6” Colume Pipe M.S. , 8” Colume Pipe M.S. , Transformer Oil , Pump Colet , Shaft Tube Oil 10 No. , Impelor Pump Shaft , Litern Ring , Gide Spider , Colume Pipe Coplling , Line Shaft Coplling , Oil Tube Baring , Glad Nut , Top Oil Tube , Spider Baring Bush , Guide Spider Rubber Bush With Sirclip , Rubber Bush/ Baring , Line Shaft Slive S.S. , Water Lubricating Tube , Stuffing Box Bush & With Gaskit , Stuffing Box Baring , Latern Ring , Sole Plate , Base Plate , Water Deflector , Q)25 Hp To 40 Hp V.T. Pum Spare Part 25Hp : 1) V.T. Motor Baring , I) Upper , Ii) Lower , Discharge & Sectioncase Baring Bush Gun Metal , Water Seal (Oil Water Separater) , Line Shaft , Oil Tube , T.T. Plate Cast Iron , Brain Rubber Bush (Spider) , Net (Cast Iron) , Nut Bolt ¾“ X 2 “ , Nut Bolt ¾“ X 6 “ , Rubber Shit , T.T. Plate Bush , Neck Ring (Gun Metal) , Impelor(Gun Metal) , Browl Assembly Casing , 6” Colume Pipe M.S. , 8” Colume Pipe M.S. , Transformer Oil , Pump Colet , Shaft Tube Oil 10 No. , Impelor Pump Shaft , Litern Ring , Gide Spider , Colume Pipe Coplling , Line Shaft Coplling , Oil Tube Baring , Glad Nut , Top Oil Tube , Spider Baring Bush , Guide Spider Rubber Bush With Sirclip , Rubber Bush/ Baring , Line Shaft Slive S.S. , Water Lubricating Tube , Stuffing Box Bush & With Gaskit , Stuffing Box Baring , Latern Ring , Sole Plate , Base Plate , Water Deflector , Q)25 Hp To 40 Hp V.T. Pum Spare Part 40Hp: 1) V.T. Motor Baring , I) Upper , Ii) Lower , Discharge & Sectioncase Baring Bush Gun Metal , Water Seal (Oil Water Separater) , Line Shaft , Oil Tube , T.T. Plate Cast Iron , Brain Rubber Bush (Spider) , Net (Cast Iron) , Nut Bolt ¾“ X 2 “ , Nut Bolt ¾“ X 6 “ , Rubber Shit , T.T. Plate Bush , Neck Ring (Gun Metal) , Impelor(Gun Metal) , Browl Assembly Casing , 6” Colume Pipe M.S. , 8” Colume Pipe M.S. , Transformer Oil , Pump Colet , Shaft Tube Oil 10 No. , Impelor Pump Shaft , Litern Ring , Gide Spider , Colume Pipe Coplling , Line Shaft Coplling , Oil Tube Baring , Glad Nut , Top Oil Tube , Spider Baring Bush , Guide Spider Rubber Bush With Sirclip , Rubber Bush/ Baring , Line Shaft Slive S.S. , Water Lubricating Tube , Stuffing Box Bush & With Gaskit , Stuffing Box Baring , Latern Ring , Sole Plate , Base Plate , Water Deflector , I) Drive Out 1 Hp To 3 Hp Monoblock Pump , Ii) Drive Out 4 Hp To 10 Hp Monoblock Pump , Ii) 2 To 3Hp Monoblock Motor Rewinding , Iii) 4 To 5Hp Monoblock Motor Rewinding , Iv) 6 To 7½Hp Monoblock Motor Rewinding , V) 8 To 10Hp Monoblock Motor Rewinding , Monoblock Pump Open, Repairing, Fitting & Testing I) 1 To 1½Hp , Monoblock Pump Open, Repairing, Fitting & Testing Ii) 2 To 5Hp , Monoblock Pump Open, Repairing, Fitting & Testingiii) 6 To 10Hp , Roter Pump Shaft Turning & Polishingi) 1 To 5 Hp , Roter Pump Shaft Turning & Polishingii) 6 To 10Hp , To Make Monoblock Pump Bush & Housing (Baring)I) 1 To 1½Hp , To Make Monoblock Pump Bush & Housing (Baring)Ii) 2 To 5Hp , To Make Monoblock Pump Bush & Housing (Baring)Iii) 6 To 10Hp , Tofit New Pump Set I) 1 To 1½Hp , Tofit New Pump Setii) 2 To 5Hp , Tofit New Pump Set Iii) 6 To 10Hp , T) Monoblock Pump Spare Partsbaring1 To 1½ Hp(Driving Side) , Baring (Driven Side) , Impelor Key , Pump Bush , Air Fan , Sturnut Key , Baring Plate Both Side1 Item , Water Seal , Gland Rope , Gland Bush , Gland Plate , Roter Fitted Shaft , Latern Ring , Impelor Brass , Impelor C.I. , Defuser , Baring Housing , Neck Ring , Foot Volve , Fluge (Dilevery/ Suction) , Shaft Sleve , Delivery Casing , Stater Fitted Motorbody , Spacer , Fan Cover , Water Deflector , T) Monoblock Pump Spare Parts 2 To 3 Hp Baring (Driving Side) , Baring (Driven Side) , Impelor Key , Pump Bush , Air Fan , Sturnut Key , Baring Plate Both Side1 Item , Water Seal , Gland Rope , Gland Bush , Gland Plate , Roter Fitted Shaft , Latern Ring , Impelor Brass , Impelor C.I. , Defuser , Baring Housing , Neck Ring , Foot Volve , Fluge (Dilevery/ Suction) , Shaft Sleve , Delivery Casing , Stater Fitted Motorbody , Spacer , Fan Cover , Water Deflector , T) Monoblock Pump Spare Parts 4 To 5 Hp Baring (Driving Side) , Baring (Driven Side) , Impelor Key , Pump Bush , Air Fan , Sturnut Key , Baring Plate Both Side1 Item , Water Seal , Gland Rope , Gland Bush , Gland Plate , Roter Fitted Shaft , Latern Ring , Impelor Brass , Impelor C.I. , Defuser , Baring Housing , Neck Ring , Foot Volve , Fluge (Dilevery/ Suction) , Shaft Sleve , Delivery Casing , Stater Fitted Motorbody , Spacer , Fan Cover , Water Deflector , T) Monoblock Pump Spare Partsbaring 6 To 7½Hp (Driving Side) , Baring (Driven Side) , Impelor Key , Pump Bush , Air Fan , Sturnut Key , Baring Plate Both Side1 Item , Water Seal , Gland Rope , Gland Bush , Gland Plate , Roter Fitted Shaft , Latern Ring , Impelor Brass , Impelor C.I. , Defuser , Baring Housing , Neck Ring , Foot Volve , Fluge (Dilevery/ Suction) , Shaft Sleve , Delivery Casing , Stater Fitted Motorbody , Spacer , Fan Cover , Water Deflector , T) Monoblock Pump Spare Partsbaring 8 To 10Hp(Driving Side) , Baring (Driven Side) , Impelor Key , Pump Bush , Air Fan , Sturnut Key , Baring Plate Both Side1 Item , Water Seal , Gland Rope , Gland Bush , Gland Plate , Roter Fitted Shaft , Latern Ring , Impelor Brass , Impelor C.I. , Defuser , Baring Housing , Neck Ring , Foot Volve , Fluge (Dilevery/ Suction) , Shaft Sleve , Delivery Casing , Stater Fitted Motorbody , Spacer , Fan Cover , Water Deflector , U) Bare Pump Repairingto Drive Out Bare Pump I) 10 To 20 Hp , Ii) 21 To 50 Hp , Bare Pump To Open, Repairing, Fitting & Testing I) 10 To 20 Hp , Ii) 21 To 50 Hp , Pump Shaft Turning & Polishing I) 10 To 20 Hp , Ii) 21 To 50 Hp , To Make Pump Bush & Housing (Baring) I) 10 To 20 Hp , Ii) 21 To 50 Hp , To Fit New Bare Pump I) 10 To 20 Hp , Ii) 21 To 50 Hp , Pump Repairing & Fittingi) 10 To 20 Hp , Ii) 21 To 50 Hp , To Make Gland Bush Housing I) 10 To 20 Hp , Ii) 21 To 50 Hp , Drive Out Bare Pump Pipe Line With Foot Volve I) 10 To 20 Hp , Ii) 21 To 50 Hp , To Fit Bare Pump Pipeline With Foot Volve I) 10 To 20 Hp , Ii) 21 To 50 Hp , V) Bare Pump Spare Parts 10 To 15 Hp Baring (Ball Baring) , Rolar Baring , Impelor Key , Pump Bush , Stud Nut , Nut Bolt Kit , Air Cock , Base Plate , Water Seal , Gland Bush , Gland Plate , Pump Shaft , Latern Ring , Impelor Brass , Impelor (C.I) , Difuser , Baring Housing , Neck Ring (Small) , Neck Ring (Big) , Flasher , Foot Volve , Check Nut , Impelor Housing , Roter Casing , Roter , Delevery Casing , Stuffing Box Bush , Shaft Sleve , Water Deflector , Cuplling Half Flexible , Baring Cover , Grees Cup , Flage Section/ Delivery , V) Bare Pump Spare Parts 16 To 20Hp Baring (Ball Baring) , Rolar Baring , Impelor Key , Pump Bush , Stud Nut , Nut Bolt Kit , Air Cock , Base Plate , Water Seal , Gland Bush , Gland Plate , Pump Shaft , Latern Ring , Impelor Brass , Impelor (C.I) , Difuser , Baring Housing , Neck Ring (Small) , Neck Ring (Big) , Flasher , Foot Volve , Check Nut , Impelor Housing , Roter Casing , Roter , Delevery Casing , Stuffing Box Bush , Shaft Sleve , Water Deflector , Cuplling Half Flexible , Baring Cover , Grees Cup , Flage Section/ Delivery , V) Bare Pump Spare Parts 21 To 50 Hp Baring (Ball Baring) , Rolar Baring , Impelor Key , Pump Bush , Stud Nut , Nut Bolt Kit , Air Cock , Base Plate , Water Seal , Gland Bush , Gland Plate , Pump Shaft , Latern Ring , Impelor Brass , Impelor (C.I) , Difuser , Baring Housing , Neck Ring (Small) , Neck Ring (Big) , Flasher , Foot Volve , Check Nut , Impelor Housing , Roter Casing , Roter , Delevery Casing , Stuffing Box Bush , Shaft Sleve , Water Deflector , Cuplling Half Flexible , Baring Cover , Grees Cup , Flage Section/ Delivery , W) Bare Motor Repairingdrive Out Bare Motor , W) Bare Motor Repairingdrive Out Bare Motor I) 10 To 20 Hp , W) Bare Motor Repairingdrive Out Bare Motor Ii) 21 To 50 Hp , Bare Motor Rewinding I) 1 To 5 Hp , Bare Motor Rewinding Ii) 6 To 10 Hp , Bare Motor Rewinding Iii) 11 To 15 Hp , Bare Motor Rewinding Iv)16 To 20 Hp , Bare Motor Rewindingv) 21 To 30 Hp , Bare Motor Rewinding Vi) 31 To 35 Hp , Bare Motor Rewinding Vii) 36 To 40 Hp , Bare Motor Rewinding Viii) 41 To 50 Hp. , Motor Opening, Over Oiling, Fitting & Testingi) 1 To 5 Hp , Motor Opening, Over Oiling, Fitting & Testingii) 6 To 10 Hp , Motor Opening, Over Oiling, Fitting & Testing Iii) 11 To 15 Hp , Motor Opening, Over Oiling, Fitting & Testingiv)16 To 20 Hp , Motor Opening, Over Oiling, Fitting & Testing V) 21 To 30 Hp , Motor Opening, Over Oiling, Fitting & Testing Vi) 31 To 35 Hp , Motor Opening, Over Oiling, Fitting & Testingvii) 36 To 40 Hp , Motor Opening, Over Oiling, Fitting & Testing Viii) 41 To 50 Hp. , Roter Shaft Turning & Polishing I) 1 To 5 Hp , Roter Shaft Turning & Polishing Ii) 6 To 10 Hp , Roter Shaft Turning & Polishing Iii) 11 To 15 Hp , Roter Shaft Turning & Polishingiv)16 To 20 Hp , Roter Shaft Turning & Polishing V) 21 To 30 Hp , Roter Shaft Turning & Polishing Vi) 31 To 35 Hp , Roter Shaft Turning & Polishingvii) 36 To 40 Hp , Roter Shaft Turning & Polishing Viii) 41 To 50 Hp. , To Make Motor Bush & Housing (Baring Sheet) I) 1 To 5 Hp , To Make Motor Bush & Housing (Baring Sheet)Ii) 6 To 10 Hp , To Make Motor Bush & Housing (Baring Sheet)Iii) 11 To 15 Hp , To Make Motor Bush & Housing (Baring Sheet)Iv)16 To 20 Hp , To Make Motor Bush & Housing (Baring Sheet)V) 21 To 30 Hp , To Make Motor Bush & Housing (Baring Sheet)Vi) 31 To 35 Hp , To Make Motor Bush & Housing (Baring Sheet) Vii) 36 To 40 Hp , To Make Motor Bush & Housing (Baring Sheet) Viii) 41 To 50 Hp. , To Fit New Motor I) 1 To 5 Hp , To Fit New Motor Ii) 6 To 10 Hp , To Fit New Motoriii) 11 To 15 Hp , To Fit New Motoriv)16 To 20 Hp , To Fit New Motorv) 21 To 30 Hp , To Fit New Motorvi) 31 To 35 Hp , To Fit New Motorvii) 36 To 40 Hp , To Fit New Motor Viii) 41 To 50 Hp. , Panel Board & Starter Repairingi) 1 To 5 Hp , Panel Board & Starter Repairingii) 6 To 10 Hp , Panel Board & Starter Repairingiii) 11 To 15 Hp , Panel Board & Starter Repairingiv)16 To 20 Hp , Panel Board & Starter Repairing V) 21 To 30 Hp , Panel Board & Starter Repairing Vi) 31 To 35 Hp , Panel Board & Starter Repairing Vii) 36 To 40 Hp , Panel Board & Starter Repairing Viii) 41 To 50 Hp. , To Fit Motor As It Isi) 1 To 5 Hp , To Fit Motor As It Isii) 6 To 10 Hp , To Fit Motor As It Is Iii) 11 To 15 Hp , To Fit Motor As It Isiv)16 To 20 Hp , To Fit Motor As It Isv) 21 To 30 Hp , To Fit Motor As It Is Vi) 31 To 35 Hp , To Fit Motor As It Isvii) 36 To 40 Hp , To Fit Motor As It Isviii) 41 To 50 Hp. , X)Bare Motor Spare Parts 10 To 15:Bearing , Air Fan , Shaft , Bearing Plate , Motor Bush , Roter Assembly , Stud Nut Kit , Nut Bolt Kit , X)Bare Motor Spare Parts 6 To 20:Bearing , Air Fan , Shaft , Bearing Plate , Motor Bush , Roter Assembly , Stud Nut Kit , Nut Bolt Kit , X)Bare Motor Spare Parts 21 To 50 :Bearing , Air Fan , Shaft , Bearing Plate , Motor Bush , Roter Assembly , Stud Nut Kit , Nut Bolt Kit , Y)Vaccume Pump Repairing Drive Out Pumpi) 1 To 3 Hp , Y)Vaccume Pump Repairing Drive Out Pump Ii) 4 To 5 Hp , Motor Rewinding I) 1 To 3 Hp , Motor Rewinding Ii) 4 To 5 Hp , Pump Opening, Repairing, Over Oiling, Fitting & Testingi) 1 To 3 Hp , Pump Opening, Repairing, Over Oiling, Fitting & Testingii) 4 To 5 Hp , Roter Shaft Turning & Polishing I) 1 To 3 Hp , Roter Shaft Turning & Polishing Ii) 4 To 5 Hp , To Make Vaccume Pump Bush & Baring Housing I) 1 To 3 Hp , To Make Vaccume Pump Bush & Baring Housing Ii) 4 To 5 Hp , To Fit New Pump Set I) 1 To 3 Hp , To Fit New Pump Set Ii) 4 To 5 Hp , Panel Board & Starter Repairing I) 1 To 3 Hp , Panel Board & Starter Repairing Ii) 4 To 5 Hp , Z) Vaccume Pump Spare Parts 1 To 3 Hp :Baring , Impelor Key , Pump Bush , Air Fan , Sturnut Key , Baring Plate Both Side , Mechanical Seal , Gland Rope , Gland Bush , Gland Plate , Roter Fitted Shaft , Latern Ring , Roter G.M. , Fan Cover , Spacer , Baring Housing , Neck Ring , Port Plate , Flage (Delevery/ Section) , Shaft Sleve , Saction & Delivery Chember , Steter Fitted Motorbody , Tie Rod , Roter Casing , Liquid Diflector , Z) Vaccume Pump Spare Parts4 To 5 Hp :Baring , Impelor Key , Pump Bush , Air Fan , Sturnut Key , Baring Plate Both Side , Mechanical Seal , Gland Rope , Gland Bush , Gland Plate , Roter Fitted Shaft , Latern Ring , Roter G.M. , Fan Cover , Spacer , Baring Housing , Neck Ring , Port Plate , Flage (Delevery/ Section) , Shaft Sleve , Saction & Delivery Chember , Steter Fitted Motorbody , Tie Rod , Roter Casing , Liquid Diflector , Starter Reley I) 6 To 10A. , Ii) 9 To 14 A. , Iii) 13 To 21 A , Iv) 19 To 27 A , V) 21 To 32 A , Starter No Volt & Over Load Coil , Contactor Set Fulli) S. K. -1 , Ii)M.L. -1 , Iii) M.L. -2 , Iv) M.L. -3 , V) M.L. - 4 , Vi) M.L. - 5 , Vii) M.L. - 6 , Viii) M.L. - 7 , Ix) M.L. - 8 , X) M.L. - 9 , Xi) M.L. - 10 , Reley Plate (Kit) , Contactor Point Kiti) S. K. -1 , Ii) M.L. -1 , Iii) M.L. -2 , Iv) M.L. -3 , V) M.L. - 4 , Vi) M.L. - 5 , Vii) M.L. - 6 , Viii) M.L. - 7 , Ix) M.L. - 8 , X) M.L. - 9 , Xi) M.L. - 10 , I) Fuse Grip 16 A. , Ii) Fuse Grip 32 A. , Iii) Fuse Grip 63 A. , Iv) Fuse Grip 100 A , V) Fuse Grip 200 A.. , Fuse Basei) 16 A. , Ii) 32 A. , Iii) 63 A. , Iv) 100 A. , V) 200 A. , Connector Plate , I) Volt Meter 0-440 Volt Small , Ii) Volt Meter 0-440 Volt Big , Ampear Meter , Ampear Meteri) 0 To 15 A. , Ii) 0 To 50 A. , Iii) 0 To 100 A. , Iv) 0 150 A. , Capasitor 1 K.V.A.R. , Single Phasing Preventor , Water Level Guardwith 60 M. Wire , On-Off Rotery Switch , Volt Meter / Ampere Meter Switch , Nuon Indicator Lamp , Main Switch 440 Volt Three Phase , I) 16 A. , Ii) 32 A. , Iv) 100 A. , V) 200 A. , M.S.E.B. Unit I) 32 A. , Ii) 63 A. , Iii) 100 A. , Iv) 200 A. , H.R. C. Fuse I) 100 A. , Ii) 125 A. , Iii) 200 A. , Aquazilary Coil , Timer Coil , C.T. Coil I) 60 A. , Ii) 100 A. , Iii) 200 A. , Tog Tester , Multi Meter , Insulation Tester , Meger , Hand Gloves - 1 Pair (Rubber) , Insulated Rubber Matting , To Arthing With Arthing 300 X 300 X 50 M.M. Arthing Plate,G I. Pipe & Arthing Wire , To Arthing With Arthing 450 X 450 X 50 M.M. Arthing Plate, G I. Pipe & Arthing Wire , Arthing Wire 14 To 6 Guage , Starter D.O.L , I) 1 To 5 Hp , Ii) 5 To 10 Hp , Iii) Star Delta Auto 10 To 20 Hp , Vi) Star Delta Auto 21 To 30 Hp , V) Auto Transfarmer Starter 20 To 30 Hp , Vi) Auto Transfarmer Starter 31 To 50 Hp , Transfarmer Coil Rewinding With Copper Wire In Transfarmer Starter. Without Returning Old Copper Wire. , Change Over Switch 50 A. 3 Phase , Change Over Switch 100 A. 3 Phase , Change Over Switch 200 A. 3 Phase , Buz Bar 30 To 50 Hp , Transfarmer Oil , Discharge With Stainless Steel Pump Shaft And Motor Suitable For Working On 415 V± 10%, 3Ph, 50 Hz., A.C. Supply, Cable Guard, Thrust Carbon/Fibre Bearing To Accept Entire Hydraulic Thrust, Water Proofwinding Shall Be Provided. The Pump Set Shall Be Suitable For Direct Coupling. Pump Shall Have Suitable Suction Stainer Shall Also Be Provided. 3 Core, Single/Double Run Copper Conductor Submersible Type Flat Cable 3 Mtr. And 3 Pairs Of Erection Clamps. Rates Per Pump Upto 20 Stages (As Per Design)Submercsible Pump Set 100Mm Dia(With Polypropelene/ Noryl Impeller)Up To 20 Stages1.5 Hp , 2.0 Hp , 3.0 Hp , 4.0 Hp , 5.0 Hp , Submersible Pump 150 Mm Dia (With Bronze /Stainless(Cf8m) Impeller) Up To 8 Stages 1.5 Hp , 2.0Hp , 3.0Hp , 4.0Hp , 5.0 Hp , 6.0Hp , 7.5 Hp , Submersible Pump 150 Mm Dia (With Bronze /Stainless(Cf8m) Impeller) Up To 12 Stages1hp , 12.5Hp , 15Hp , Submersible Pump 150 Mm Dia (With Bronze /Stainless(Cf8m) Impeller) Up To 15 Stages17.5 Hp , 20 Hp , 22.5 Hp , Submersible Monoblock (With Bronze / Stainless Steel (Cf8m) Impeller ) Horizontal/Vertical -Upto 3 Stages( Motor With Water Lubricated Bearing To Accept Entire Hydraulice Threst ) 3 Hp , 5Hp , 7.5 Hp , 10 Hp , Supplying And Erecting Submersible Pumpset 0.75Kw/ 1Hp With 415V 50 Cycles Ac Supply Suitable For 100Mm Dia Borewell . Suitable For 10 To 50 Lpm Discharge At 70 To 20 M And ( Max Effciency At 52 M. Head 30 Lpm Discharge) & Delivery Pipe Of 32 Mmdiameter With A Neccssary H. Type Clamp As Per Specification No. Wp. Smp , Suppluing And Erecting 3 Core Pvc. Insulated Flat Flexible Submersible Cable With Copper Conductor, Pvc Insulated And Pvc Sheathed 3Core 2.5 Sq.Mm , 3Core 4 Sq.Mm , 3Core 6 Sq.Mm , 3Core 10 Sq.Mm , Providing, Suplying & In Standard Lenghts Mdpe Pipes. Conforming To I.S.O. 4427:1996/With Necessary Jointing Material Like Mechanical Connection I.E. Thread/Insert Joint/Quick Release Coupler Joint/Compresion Fitting Joint Or Flanged Joint. ...............Etc Complete. Pn-16Sdr - 9 20 Mm , 25Mm , 32Mm , 40Mm , 50Mm , 63Mm , 75Mm , 90Mm , Providing, Suplying & In Standard Lenghts Hdpe Pipes. Conforming To I.S.O. 4427:1996/With Necessary Jointing Material Like Mechanical Connection I.E. Thread/Insert Joint/Quick Release Coupler Joint/Compresion Fitting Joint Or Flanged Joint. ...............Etc Complete.6Kg 32Mm , 40Mm , 50Mm , Cpvc Pipe32mm , Cpvc Pipe 40Mm , 50Mm , Providing Isi Mark Gi Pipe With One Coupler Of Following Class And Dia Including All Local And Central Taxces, Octroi, Inspection Charges, Transportation To Stores Etc. Complete. Is 1239/2004 - 15 Mm Dia Medium , 20 Mm Dia Medium , 25 Mm Dia Medium , 32 Mm Dia Medium , 40 Mm Dia Medium , 50 Mm Dia Medium , 65 Mm Dia Medium , 80 Mm Dia Medium , 100 Mm Dia Medium , 125 Mm Dia Medium , 150 Mm Dia Medium , Lowering, Laying, Jointing G.I. Pipes And Specials Of Following Class And Dia. Including Conveyance From Stores To Site Of Works, All Labour, Giving Satisfctory Hydraulic Testing Etc. Complete. Either Underground Or In Vertical Position, As Directed By Engineer-In-Charge.- 15 Mm Dia Medium , 20 Mm Dia Medium , 25 Mm Dia Medium , 32 Mm Dia Medium , 40 Mm Dia Medium , 50 Mm Dia Medium , 65 Mm Dia Medium , 80 Mm Dia Medium , 100 Mm Dia Medium , 125 Mm Dia Medium , 150 Mm Dia Medium , Providing, Supplying Isi Mark C.I.D/F. Reflux Valve (Non Return Valve ) With Jointing To Pipe Work(Including All Hardware And Packing) Water Works Quality With Jointing To Pipe Withoutbypass Arrangement With Gunmetal Seat Excluding C.C. Foundation/Structural Steel Supports. For Rating Pn - 1.6 Confirming To Is - 5312: 1984 - 50 Mm Dia , 65 Mm Dia , 80 Mm Dia , Lowering, Laying And Jointingin Position Following Cidf Reflux Valve/ Butterfly Valve And Sluice Valve Including Cast Of All Labour, Jointing Material Including Nut Bolts And Giving -50 Mm Dia , 65 Mm Dia , 80 Mm Dia , Nrv Valve Gun Metal 25 Mm , Nrv Valve Gun Metal 80 Mm , Providing And Supplying Isi Standard C.I. Flanged / S & S Specials Including All Taxes (Central And Local) Railway Freight, Insurance, Unloading From Railway Wagon, Loading Into Truck, D.F.Specials80 Mm To 300 Mm Dia , Supplying And Erecting Automatic Control Panel For 3Ph,415V ,Ac Submersible /Centrifugal Pumpset Upto 6 Hp Consisting Of Dol Starter Having Relay Range 9-14 Amp S.P.P.,Combined Ammeter/Voltmeter, Phase Indicating Lamp Enclosed In Crca Powder Coated Vibration Proof Encloser With Ip 54 Protection Control Panel Should Offer Single Phase ,Phase Reversal ,Phase Inbalance Etc ( Similer To Lt Model No.Mu G6/Cat No.Ss97756) , Dol Starter- Supplying And Erecting Dol Starter To Operate Squirrel Cage Induction Motor Working On 380 - 440 V, 3 Ph., 50 Hz., With No Volt Coil, Overload Element With Necessary Material & Connected To Supply Etc. Comp. Starter With Original Sheet Steel Encloser. - Up To 7.5 Hp , Up To 10 Hp , Main Switch 415V -16A , Main Switch 415V- 32A , Main Switch415v-63A , S.S. Nipple , Dual Chamber/Special Water Chamber , Providing Structural Steel Work In Single Stanctions Composed Of Rsj Chanel Etc. With Caps, Bases, Mild Steel Plates Angles, Bracket Cleats, Gusset Plates, Anchour Bolts Etc. As Per Detailed Drawing And Design Or As Directed By Engineer-In-Charge Including Cutting, Fabricating, Hoisting, Erecting, Fixing, In Position Making Reveted/Bolted/Welded In Connection And One Coat Of Anti Corrosive Point And Over It Two Coats Of Oil Painting Etc. Complete.-7.5 Hpto 12.5H.P. , Above12.5 Hpto20h.P. , Above 20 Hpto25h.P. , Above 25 Hpto40h.P. , Providing Structural Steel Work In Single Stanctions Composed Of Rsj Chanel Etc. With Caps, Bases, Mild Steel Plates Angles, Bracket Cleats, Gusset Plates, Anchour Bolts Etc. As Per Detailed Drawing And Design Or As Directed By Engineer-In-Charge Including Cutting, Fabricating, Hoisting, Erecting, Fixing, In Position Making Reveted/Bolted/Welded In Connection And One Coat Of Anti Corrosive Point And Over It Two Coats Of Oil Painting Etc. Complete. , Earthing For Pumping Machinery Supplying And Erecting Earthing With Galvanised Cast Iron Earth Plate Size 60X60x0.6 Cm Complete With All Materials,Testing &Recording The Result As Per Specification No.Ea-Ep , Excavation For Foundation / Pipe Trenches In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavatedmaterial Upto A Distance Of 50 Metres And Lifts As Below, Stacking And Spreading As Directed, Normal Dewatering, Preparing The Bed For Foundation And Excluding Back Filling, Etc. Complete. Lift 0-1.5 M. , Excavation For Foundation / Pipe Trenches In Hard Murum, Including Removing The Excavatedmaterial Upto A Distance Of 50 Metres And Lifts As Below, Stacking And Spreading As Directed, Lift 0-1.5 M. , Providing And Supplying In Standard Lengths Isi Mark Rigid Unplasticised Pvc Pipes Suitable For Potable Water With Unplastised Pvc Pipes Suitable For Potable Water With Solvent Cement Joints Including Cost Of Couplers, As Per Is Specification No. 4985 / 1988 Including All Local And Central Taxes, Transportation, Freight Charges, Inspection Charges, Loading, Unloading, Conveyance To The Departmental Stores/ Site And Stacking The Same In Closed Shed Duly Protected From Sun Rays And Rains Including Cost Of Jointing Material I.E. Solvent Cement, Etc.Complete (Selffit Type To Be Jointed With Cement Solvent).-63 Mm Dia. Pvc 4 Kg/ Cm² , 75 Mm Dia. Pvc 4 Kg/ Cm² , 90 Mm Dia. Pvc 4 Kg/ Cm² , 110 Mm Dia. Pvc 4 Kg/ Cm² , 140 Mm Dia. Pvc 4 Kg/ Cm² , Lowering, Laying And Jointing Pvc Pipes And Specials Of Following Class And Diameter Including Cost Of Conveyance From Stores To Site Of Work Including Cost Of All Labour, Material, Except Cement Solvent, Rubber Ring, Giving Satisfactory Hydraulic Testing As Per Is Code, Etc. Complete (With Cement Solvent Joint / Ring Fit Joint)-63 Mm Dia. Pvc 4 Kg/ Cm². , 75 Mm Dia. Pvc 4 Kg/ Cm² , 90 Mm Dia. Pvc 4 Kg/ Cm² , 110 Mm Dia. Pvc 4 Kg/ Cm² , 140 Mm Dia. Pvc 4 Kg/ Cm² , Providing And Laying In Citu C.C. Of Of Trap / Granite/ Quartzite/Gneiss Metal For Foundation And Bedding Including Normal Dewatering, Formwork, Compacting And Curing, Finishing, Etc.Complete. Pcc M -100 For Reinstaining Of Cement Road , Providing And Constructing Two Taps Standpost As Per Type Design With Excavation 15 Cm Thick Pcc (1:3:6) Bedding 20 Mm Thick Pcc (1:2:4) Concrete For Platform Of 1.75 M Dia. With Side Curb And Bucket Rest 80 Mm Dia, Heavy Duty Gi Pipe Central Post Duly Filled Therein With C.C. (1:2:4) 5 M Long, 20 Mm Dia. Medium G.I. Pipe From Point Of Tapping To Standpost Additional 20 Mm Dia G.I. Pipe Fixed Verticaly Upto 15 Mm Dia Self Closing Water Taps On Brass Ferrule Etc. Complete Together With All Labour And Material Charges As Per Drawing And As Directed By Engineer-In-Charge When Good Foundation Is Available. Rate Includes Draining Arrangement By Excavating Open Gutters. , Refilling The Trenches With Available Excavated Stuff With Soft Material First Over Pipeline And Then Hard Material In 15 Cm Layers With All Leads And Lifts Including Consolidation, , Providing,Hosting And Fixing In Position Of Approved Make High Density Polyethylene Uv Stabilized Conforming To Is 12701 ,Water Storage Tank With Necessary Connections, Testinfg Etccomplete 9 Prior Approval Of Sample By Ex. Engineer Is Necessary Before Use ) Spect. No. As Directed By Engineer In Charg.For 200 To 1000 Lit. , For 1000 To 20000 Lit. , Providing Fixing 15Mm Dia Screw Down Bib Stop Tap Of Brass Including Necessory Socket Union Nut Complete (Pwd Csr 22-23 P.No. 288 I.No. 41.4 , Providing And Laying In Trenches Dia Cpvc Pipeincluding Necessary Excavation Fitting Reffilling Trenches Etc Complete Including Removing Existing Pipe Line If The Same In Pwd Chowky Or As Directed Etc Complete 1)For --15 Mm Dia , 2) For 20 Mm Dia , 3) For 25 Mm Dia , 4) For 32 Mm Dia , 5) For 40 Mm Dia
Contract Date: May 27, 2026 Contract Value : ₹ 30.00 Lakh
Government Departments No of Bidders 5
Maharashtra View Result →
15.
Housing Urban and Rular Development #11175654 Technical Bid
development of landscaping work of tower of justice in district gurugram (original work) , hsr item 26.1-supplying and stacking at site of work welldecayed farm-yard manure from any available source,approved by the engineer-in-charge including screening through sieve of i.s.designation 16 mm with 5 km lead. , hsr item 26.2-supplying and stacking of good quality top layer garden earth free from debris and weeds, at site including royalty and carriage/lead 5 km (good earthmeasured in stacks will be reduced by 20 % for payment) onlyfor filling of pots and flower beds . 0.00 0.00 0.00 , hsr item 26.4.8-site clearance 8. uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. , hsr item 26.9.4-turfing lawns with fine grassing ( selection no.1/ bermuda and mexican/neelgiri grass )includingploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying of selection no. 1bermuda doob grass and mexican/neelgiri grass roots, including supplying and spreading of farmyard manure at the rate of 0.60 cum per 100 sqm, maintenance till weed free turf is formed 4. providing and fixing selection no. 1 grass turf with earth 50mm to 60mm thickness and ramming with required wooden tools, rolling with light roller to make the surface smooth and even , hsr item 26.13.4-digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) 4. hole 0.60 metre dia and 0.60 metre deep , hsr item 26.13.3-digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) 3. hole 0.75 metre dia and 0.75 metre deep , hsr item 26.18-supply and planting of disease free healthy , vigorous growing more than 75 cm height permanent shrubs in already prepared pits, supplied in 25 cm x 20 cm poly bags , application of 10 ml chlorpyriphos 20% e.c. term , hsr item 26.20-supply and planting rare and specimen tree plants in already prepared pits (ficus starlight 150 cm height , terminalia 210 cm height, menatalis , michelia champaca hybrid more than 180 cm height, cyprus (golden juniperous ) more than 180 cm height, topiary of 10 to 12 no. well trimmed bolls of more than 30cm size of ficus nuda, ficus retusa,ficus long island , ficus panda more than 180 cm height, golden bottle brush , casurina equistefolia , bottle palm with stem circumference at base more than 40cm ,washingtonia palm of healthy clear stem height below leaf more thant 90 cm ) including , fertilizer and insecticides chlorpyriphos 20 ml per pit, planting of 180cm to 210cm tall sapling in position and flooding with water .specie of plant will be decided by engineer in charge. , hsr item 26.277-providing and displaying bamboo buddhavalley with fresh and healthy 5 to 6 suckers 1.80 m to 2.10mht umbrella type plant well developed in 50 cm cement pot asper direction of the officer-in-charge , hsr item 26.279-providing and displaying bismarckia palm 115 to 180 cm ht., well developed 12 and above good colour fresh and healthy leaves in 40 cm cement pot as per direction of the officer-in- charge , hsr item 26.283-providing and displaying cycus revoluta specimen plant, having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumference of base stem well developed in 40 cm challi, as per direction of the officer-incharge. , hsr item 26.286-providing and displaying cyprus goldenconical shape 150 to 165 cm ht., with fresh and healthygolden colour foliage in 40 cm cement pot as per direction ofthe officer-in-charge , hsr item 26.292-providing and displaying ficus retusa topiary well developed with fresh and healthy 8 to 10 big ball specific size and shape 180 to 210cm ht in 40 cm cement pot as per direction of the officer-in-charge. , hsr item 26.298-providing and displaying foxtail palm well developed with fresh and healthy foliage of ht. 210 to 240 cm in big 40 cm cement pot as per direction of the officer-incharge. , hsr item 26.303-providing and displaying latania rubrapalm well developed with fresh and healthy foliage 150 to 180cm ht. with 6 to 7 leaves in big 35 cm cement pot as perdirection of the officer-in- charge , hsr item 26.22.2-planting seasonal flower in beds 2. planting flower beds including digging 30 cm deep bed and refilling of beds with excavated soil and fym 0.0508 cum per sqm , fertilizer dap 50 gms and insecticides chlorpyriphos 10ml per sqm , planting of f1 hybrid well bloomed flower saplings to be supplied in polybags at 25cm distance from plant to plant and row to row minimum 15 no . plants per sqm , hsr item 26.28-`supply and planting healthy disease free 30 cm to 45 cm height ground cover of rare species plants .i.e. rasselia, chlorophytum, juniperous prostata, asparagus grass, cuphea chinensis, ipomea, portulacaria (jade plant)zebrina trades cantia etc ) including digging 30 cm deep bed and refilling of beds with excavated soil and fym 0.075cum per sqm , fertilizer dap 100 gms and insecticides chlorpyriphos 10ml per sqm , planting of saplings of rare specie of plants to be supplied in 20cm x 20cm ` polybags with full of leaves and in healthy condition at 30cm distance from plant to plant and row to row minimum 15 no. plants per sqm ,and watering , hsr item 26.34-planting permanent hedges including digging of trenches, 60 cm wide and 45 cm deep, refilling the excavated earth, mixed with farm-yard manure, supplied at the rate of 1.62 cum per 18 sqm, dap 0.6kg, chlorpyriphos 20%ec@ 0.20 litre per 18 sqm and supplying and planting hedge at 30 cm apart in two rows @ 202 no. well trimmed bushy ,multi-branched ,30 cm to 45 cm in height plants to be supplied in 15 cm x 15 cm poly bags per 18 sqm , hsr item 26.52-preparation of mounds of various size and shapes including supply of good earth, in layers not exceeding 20 cm in depth, breaking of clods, watering each layer, dressing etc, lead up to 50 m and lift up to 1.5 m complete as per directions (excluding cost of good earth and manure which will be supplied separately.) , hsr item 26.56-providing and fixing of haridwar pebbles( white river stone size of 2` to 2.50`dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc. as per direction of office in charge. , hsr item 26.77-supply of well grinded in powder form deoiled neem cake in packed gunny bags , hsr item 26.100-providing and displaying of araucaria cookie plant, having ht. 1.50 m to 1.80 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 30 cm size of earthen pot/plastic pot and as per direction of the officer-in-charge. , hsr item 26.524.9-`providing and stacking winter seasonal f1-hybrid seedlings/cuttings at site of work well developed and healthy free from disease in per tray and each tray having 100 nos. plants as per direction of the officer-in-charge.` 9. chrysanthemum double , hsr item 26.524.21-`providing and stacking winter seasonal f1-hybrid seedlings/cuttings at site of work well developed and healthy free from disease in per tray and each tray having 100 nos. plants as per direction of the officer-in-charge.` 21. marigold inca hybrid , hsr item 26.525.6-`providing and stacking summer and rainy f1-hybrid seasonal seedlings at site of work well developed and healthy free from disease in per tray and each tray having 100 nos. plants as per direction of the officer-in-charge.` 6. kochia , hsr item 26.41.3-supplying and display seasonal flowers of f1 hybrid quality in earthen pots at site of work, as specified by engineer-in-charge including cost of pot. 3. supply and planting f1 hybrid seasonal plants in well bloomed flowering stage in 30 cm size of pots , hsr item 26.38.3-supply of well burnt cylindrical earthen pots and filling of the following size empty pots with mixture of good earth and manure in the ratio of 2:1 (two part of good earth and one part of manure)and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 metre, as per direction of officer in charge. 3. 25 cm size of pots filled to full volume , hsr item 26.38.4-supply of well burnt cylindrical earthen pots and filling of the following size empty pots with mixture of good earth and manure in the ratio of 2:1 (two part of good earth and one part of manure)and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 metre, as per direction of officer in charge. 4. 30 cm size of pots filled to full volume , hsr item 26.39.2-providing circular /square cement concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 6 mm nominal size), including required from work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows and height, all complete as per direction of officer-in-charge. filling 2/3rd volume with mixture of good earth and screened , hsr item 26.39.3-providing circular /square cement concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 6 mm nominal size), including required from work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows and height, all complete as per direction of officer-in-charge. filling 2/3rd volume with mixture of good earth and screened manure in the ratio 2:1. 3. cement pots size 45cm x45cm , hsr item 26.40.5-providing 1st quality heavy duty plastic pot with base plate at site of work, filling with mixture of good earth and screened manure and coco peat in the ratio 2:1:1 5. 35 cm size of pots filled to 2/3rdvolume , hsr item 26.44.2-supplying and display indoor decorative plants with fresh foliage,60cm-75 cm in height` 3-4 stems per pot, full of leaves, suitable for earthen pots / plastic pots size 30cm dia and 30cm deep(average size),and displaying indoor including the cost of material ( garden soil, coco peat, fym in2:1:1 proportion),with ,pvc plate. complete in all respects including cost of pot . 2. in earthen pot , hsr item 26.46-`supplying and display specimen pot plant of raphis palm , cephorthia palm 150 cm,areca palm 150-180 cm and similar high quality plants of croton petra 3 plants each in 45 cm plastic pots with plastic plate for indoor display at site of work. with fresh foliage,90 cm- 180 cm in height` 6-8 stems per pot, full of leaves, ,and displaying indoor including the cost of material ( garden soil, coco peat, fym in 2:1:1 proportion),with ,pvc plate. complete in all respects.` , hsr item 26.48-supplying decorative plant in 30 cm cement pots for outdoor display at site of work with fresh foliage of 60cm-75 cm in height` 3-4 stems per pot, full of leaves, suitable for earthen pots / plastic pots size 30cm dia and 30cm deep(average size) and displaying including the cost of material ( garden soil, coco peat, fym in2:1:1 proportion),with ,pvc plate. complete in all respects , hsr item 26.50-supplying and display of specimen pot plant of cyprus , ficus starlight, topiary of ficus retusa and similar high quality plants in 45 cm cement pots with plastic plate for outdoor display at site of work. with fresh foliage,105 cm- 150 cm in height, 3-4 stems per pot, full of leaves, ,and displaying indoor including the cost of material ( garden soil, coco peat, fym in 2:1:1 proportion),with ,pvc plate. complete in all respects. , hsr item 26.67.1-providing and fixing vertical garden panels on aluminium tube (50 x25 x 1.5 mm) frame, or 18.85 kg per sqm weight ms angle and ms pipe frame fixed on wall, with growing media of coco peat, perlite and vermiculite 2:1:1, amended with fertilizers and plants as specified by the engineer in charge including drip irrigation of netafem, harvel, hunter, rain bird, jain irrigation systems minimum bis standard material , planter used should be virgin plastic, , plants supplied should in coco peat and vermiculite medium and every plants should be of permanent decorative quality height of plants should be 30cm to 45 cm .complete. 1. indoor vertical garden , hsr item 26.67.2-providing and fixing vertical garden panels on aluminium tube (50 x25 x 1.5 mm) frame, or 18.85 kg per sqm weight ms angle and ms pipe frame fixed on wall, with growing media of coco peat, perlite and vermiculite 2:1:1, amended with fertilizers and plants as specified by the engineer in charge including drip irrigation of netafem, harvel, hunter, rain bird, jain irrigation systems minimum bis standard material , planter used should be virgin plastic, , plants supplied should in coco peat and vermiculite medium and every plants should be of permanent decorative quality height of plants should be 30cm to 45 cm .complete. 2. outdoor vertical garden , hsr item 33.6.1.1-boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of engineer-in-charge, up to 90 metre depth below ground level. 1.1. all types of soil 300 mm dia , hsr item 33.8.2-supplying, assembling, lowering and fixing in vertical position in bore well, unplasticised pvc medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire and labour charges, fittings and accessories etc. all complete, for all depths, as per direction of engineer -in-charge. 2. 150 mm nominal size dia , hsr item 22.88.6-providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c cutting and making good the walls etc. internal work - exposed on wall 6. 50 mm dia nominal bore , hsr item 24.5.1.2-miscellaneous items 1.2. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 2.5 sqmm , hsr item 33.16.2-providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 2. 150 mm dia , hsr item 33.17.2-providing and fixing m.s. clamp of required dia to the top of casing/ housing pipe of tube well as per is: 2800 (part i), including necessary bolts and nuts of required size complete. 2. 150 mm clamp , hsr item 33.18.2-providing and fixing bail plug/ bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 (part i). 2. 150 mm dia , hsr item 22.99.4.1-providing and fixing gun metal nonreturn valve of approved quality (screwed end) : 4.1. 50 mm nominal bore horizonta , hsr item 33.19-development of tube well in accordance with is : 2800 (part i) and is: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by `v` notch method or any other approved method, measuring static level and draw down etc. by step draw down method, collecting water samples and getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire and labour charges of air compressor, tools and accessories etc., all as per requirement and direction of engineer-in-charge. , ns item -supply and installation isi mark 3 hp single phase submersible motor with pump of lubi, ksb, crompton, texmo etc (along with nylon rope) , ns item -supply and fixing isi mark panel board of 3 hp of bch, cuttler hammer, landt, boparai etc. with lock and key steel box. , ns item -supply and fixing, 16 mm aluminium cable of r.r./havells/fenolux make
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Haryana View Result →
16.
Drinking Water Supply and Sanitation #11148060 AOC
Tender For Earth Work Excavation For Foundations And Depositing On Bank For All Lifts And With An Initial Lead Of 10M And Lift Of 2M In Loamy And Clayey Soils Like Bc Soils, Red Earth And Ordinary Gravel Including All Operational, Incidental, Labour Charges Such As Shoring , Sheeting, Planking, Strutting, Etc. Complete For Finished Item Of Work Including Seigniorage Excluding Dewatering Charges Etc As Per Ss - 20 B ( Apss 308 ) . Plain Cement Concrete ( 1:4:8 ) Using 40 Mm Metal With Concrete Mixture. All Work Upto Plinth Level. Nominal Mix ( Cement: Fine Aggregate: Coarse Aggregate ) Using 40Mm Size Hbg ( Ss5 ) Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand, Coarse Aggregate, Water Etc. To Site, Including Seigniorage Charges, Countryes & Other Taxes On All Materials, All Operational, Incidental, And Labor Charges Such As Mixing, Laying And Ramming Concrete In Layers In Position Not Exceeding 15Cm, Finishing Top Surface, Curing Concrete, Etc., Complete For Finished Item Of Work For Foundations And Flooring Bed ( Apss No. 402 ) Plain Cement Concrete ( 1:5:10 ) Using 40 Mm Metal With Concrete Mixture. Using 40Mm Size Hbg ( Ss5 ) Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand, Coarse Aggregate, Water Etc. To Site, Including Seigniorage Charges, Countryes & Other Taxes On All Materials, All Operational, Incidental, And Labor Charges Such As Mixing, Laying And Ramming Concrete In Layers In Position Not Exceeding 15Cm, Finishing Top Surface, Curing Concrete, Etc., Complete For Finished Item Of Work For Foundations And Flooring Bed ( Apss No. 402 ) All Work Upto Plinth Level. Filling The Excavated Soils In Trenches , Sides Of The Foundations And Basement With Initial Lead In Layers Not Exceeding 15 Cm Thick Consolidatiing Each Depposited Layer By Watering And Rampping Including Cost And Conveyance Of Water To Work Site And All Operational Incidental , Labour Charges Hire Charges And T & O Complete For Finished Item Apss 309 &310 ) Supplying And Filling Gravel In Trenches , Sides Of The Foundations And Basement With Initial Lead In Layers Not Exceeding 15 Cm Thick Consolidatiing Each Depposited Layer By Watering And Rampping Including Cost And Conveyance Of Water To Work Site And All Operational Incidental , Labour Charges Hire Charges And T & O Complete For Finished Item Apss 309 &310 ) Rcc M- 20 Nominal Mix ( Cement:Fine Aggregate: Coarse Aggregate ) Corresponding To Table 9 Of Is 456 Using 20Mm Size Graded Machine Crushed Hard Granite Metal ( Coarse Aggregate ) From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand Of Concrete Coarse Aggregate, Water Etc., To Site And Including Sales & Other Taxes On All Materials Including All Operational, Incidental And Labour Charges Such As Machine Mixing, Laying Concrete, Curing Etc., Complete But Excluding Cost Of Steel And Its Fabrication Charges For Finished Item Of Work, But Excluding Centering, Shuttering. For Column Footings Rcc M- 20 Nominal Mix ( Cement:Fine Aggregate: Coarse Aggregate ) Corresponding To Table 9 Of Is 456 Using 20Mm Size Graded Machine Crushed Hard Granite Metal ( Coarse Aggregate ) From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand Of Concrete Coarse Aggregate, Water Etc., To Site And Including Sales & Other Taxes On All Materials Including All Operational, Incidental And Labour Charges Such As Machine Mixing, Laying Concrete, Curing Etc., Complete But Excluding Cost Of Steel And Its Fabrication Charges For Finished Item Of Work, But Excluding Centering, Shuttering. For Columns Rcc M- 20 Nominal Mix ( Cement:Fine Aggregate: Coarse Aggregate ) Corresponding To Table 9 Of Is 456 Using 20Mm Size Graded Machine Crushed Hard Granite Metal ( Coarse Aggregate ) From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand Of Concrete Coarse Aggregate, Water Etc., To Site And Including Sales & Other Taxes On All Materials Including All Operational, Incidental And Labour Charges Such As Machine Mixing, Laying Concrete, Curing Etc., Complete But Excluding Cost Of Steel And Its Fabrication Charges For Finished Item Of Work, But Excluding Centering, Shuttering. Plinth Beams Brick Masonry In Superstructure With Cm ( 1:6 ) Prop: Using Second Class Bricks From Approved Source Having Minimum Crushing Strength Of 40 Kg / Sqcm. Including Cost And Conveyance Of All Materials Like Cement, Sand, Bricks, Water Etc., To Site, Excluding Seigniorage Charges, Including, Countryes & Other Taxes On All Materials, All Operational, Incidental And Labor Charges Such As Mixing Cement Mortar, Constructing Masonry, Scaffolding Charges, Lift Charges, Curing, Etc., Complete For Finished Item Of Work. ( Apss No. 501 & 504 ) . Providing High Yield Strength Deformed ( Hysd ) / Thermo Mechanically Treated ( Tmt ) / Mild Steel ( Ms ) Steel Bars ( Fe 415 / Fe 500 Grade As Per Is 1786-1979 ) Of Different Diameters For Rcc Works , Including Labour Charges For Straightening, Cutting, Bending To Required Sizes And Shapes, Placing In Position With Cover Blocks Of Approved Materials And Size And Tying And Lap-Splicing With Binding Wire Of 18 Swg, Forming Grills For Reinforcement Work As Per Approved Designs And Drawings, Including Cost And Conveyance Of Steel Bars, Including All Wastages Such As Overlaps, Couplings, Chairs, Spacer Bars Including Cost And Conveyance Of Binding Wire, Cover Blocks And All Incidental, Operational, Labour Charges Such As Cutting, Bending, Placing In Position, Tying Including Sales And Other Taxes On All Materials Etc., Complete For Finished Item Of Work In All Floors. ( Apss No.126 ) Plastering 12Mm Thick Single Coat In Cm ( 1:4 ) Thick With Dubara Sponge Finish Including C / C Of All Materials Like Cement, Sand, Water Etc., To Site, Other Taxes On All Materials, All Operational, Incidental Such As Scaffolding Charges, Lift Charges, Including Cutting Of Grooves, Finishing, Curing, Etc., Complete For For Finished Item Of Work. ( Apss 1001, 1003 & 1004 ) ( Cssr ) Internal Walls Flooring With 100Mm Thick Cement Concrete 1:4:8, Using 40Mm Metal, 100Mm Thick And 20 Mm Cement Concrete Surface ( Ellis Pattern, 1St Sort ) Supply , Manufacture, Making To Specified Design Andlabour Charges For Fabricating Steel Works Like Window Grills, Compound Wall Grills, Iron Doors, Windows Including Cost Of Welding Rods, Power Charges, Excluding Cost Of Fixing In Position Painting To New Walls With 2 Coats Of Emulsion Paint Of Approved Brand And Shade After Thoroughly Brushing The Surface To Remove All Dirt And Remains Of Loose Powdered Materials, Including Cost And Conveyance Of All Materials To Work Site And All Operational, Incidental, Labour Charges Etc. Complete For Finished Item Of Work As Per Ss 911 For Internal Walls Painting To New Wood Work With Two Coats Of Ready Mixed Synthetic Enamel Paint First Quality All Shades To Give An Even Shade Over Base Coat Primar With Luppam Finishing After Thouroughky Brushing The Surface To Remove All Remains Including Cost And Conveyance Of All Materials To Site, Countryes & Other Taxes, All Operational, Incidental And Labour Charges Etc., Complete For Finished Item Of Work. ( 3 Coats ) ( Apss No. 1201 & 1212 ) . Roofing Will Be Provided With 0.5Mm Thick Galvaniged Or Pre-Painted Gi Profiled Sheets Fixed To The Purlins With 14 Size Self Drilling Screws With Neoprene Washers. Side Laps Are Stiched With Self Taping Or Drilling Sacrews.End Laps Are To Be Seeled With 25X3 Mm Butly Tap The Sheets Are Provided With Anti Capillary Grove. Supply And Fixing Of Fully Panelled Window Frame And Shutters Of Size 1.20 X 1.35 Mt With Sal Wood Frame Of Size 75X100mm And S / F Of 4 Nos. Ms Hold Fasts, Incl. All Labour Charges Such As Making Window Frame And Shutters And Fixing 10 Nos.Of 12 Mm Square Safety Bars In To The Frame Etc, Including Applying Primory Coat, Cost And Conveyance Of All Materials . Supply And Fixing Of Mild Steel Tubes For Purlins Including The Cost Of Conveyance Of All Materials & Labour Charges A ) Providing & Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank With Double Layer Approved Brand & Manufacture With Cover And Suitable Locking Arrangement & Making Necessary Holes For Inlet & Outlets And Over Flow Pipes But Without Fittings & Base Support For Tanks S&F Premium Make Cpvc Pipes Of 22.20 Mm Od Pipe - Sdr 13.5 S&F Premium Make Cpvc Pipes Of 28.60 Mm Od Pipe - Sdr 13.5 Supply And Fixing Of 0.9Mdia Rcc Collars Including Cover Plates Supply And Laying Of 25Mm Outer Dia Heavy ( 2.20Mm Thickness ) Grade With Is:9537 Part 3 Regid Pvc Pipe Of Makes Sudhakar / Maco Plast / Modi. Make Concealed In Roof Slabs With All Required Pvc / Metallic Deep Boxes Including Masonary Work And Labour Charges, Cost And Conveyance Of All Material, All Labour Charges, And Contractor Profit Etc., Complete But Excluding Gst. Supply And Laying Of 25Mm Dia Medium Grade P.V.C.Pipe Isi Mark Of Sudhakar / Maco Plast / Modi Make Concealed In Wall With Pvc / Metallic Junction Boxes And All Required Accessories Including Masonary Work For Light, Fan And Separate Plug Point With Supply And Fixing Of Suitable Size Metallic Deep Box Including All Labour Charges Etc., Complete Including Masonary Work, Including Cost And Conveyance Of All Material, All Labour Charges, And Contractor Profit Etc., Complete But Excluding Gst. Wiring With Run Of 2 Of 14 / 0.3Mm ( 1.0 Sq.Mm ) Fr / Frls Pvc Insulated Flexible Isi Mark Copper Cable ( 100V Grade As Peris:694 / 1990 ) Of Kei / Polycab / Havells / Gm / Million / Hpl / Gold Medal / Power Flex / Rpg / Anchor / Great White / Sun Cab / Fortune Art Make In Existing Pipe With 6A 1 Way Flush Type ( Modular ) Swich Of Makes Gm G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great White Omega, Ceiling Rose 3 Plate Of Makes Anchor / Gold Medal Olive / Million Zoom. And Supply Of Decolam Board Of Size 8 X 10 As Switch Control Box Complete For Light, Bell, Fan And Exhaust Fan Points Including Cost And Conveyance Of All Material And Labour Charges But Excluding Gst. Supply And Fixing Of 6A 3 / 2 Pin Wall Plug Socket Gm G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great White Omega / Hpl With 6A Switch Of Make Gm G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great White Omega / Hpl Control On A Common Switch Board With Earth Continuity Including Wire Leads, Earth Connections Along With All Labour Charges Etc., Complete..And As Per 2.1.4 Of Sta Revised Data Of Bld -Elec-2.1.4 Including Cost And Conveyance Of All Material And Labour Charges But Excluding Gst. Supply And Run Of 2 Of 22 / 0.3Mm ( 1.5 Sq.Mm ) / 2 Of F.R P.V.C. Insulated Flexible Copper Cable Makes : Finolex / Rr Kabel / Havells / Apar Ebxl / Kei ( Hffr ) / Polycab ( ( Hr_Fr-Lf ) / L&T / V-Guard ( Hffr ) In Existing Pipe For Mains Inlcuding All Labour Charges Etc., Complete. Supply And Run Of 2 Of 22 / 0.3Mm ( 2.5 Sq.Mm ) F.R P.V.C. Insulated Flexible Copper Cable Makes : Finolex / Rr Kabel / Havells / Apar Ebxl / Kei ( Hffr ) / Polycab ( ( Hr_Fr-Lf ) / L&T / V-Guard ( Hffr ) In Existing Pipe For Mains Inlcuding All Labour Charges Etc., Complete. Supply And Run Of 2 Of 56 / 0.3Mm ( 4 Sq.Mm ) Fr P.V.C. Insulated Flexible Copper Cable In Existing Pipe For Mains Inlcuding All Labour Charges Etc., Complete. Supply And Fixing 4 Way Spn Db With Ip 20 Protection As Per Is:13032 And Suitable For 4Nos S.P Out Goings And For 1 No Incommer Etc Complete Of Makes Legrand / Schneider. With Ip-20 Protection Suitable For Single Phase 40A Dp Isolator Of Make Legrand / Schneider. As Incomer And 6-32A 10Ka Tp Mcb, C / D Curve Isi Mark Of Make Legrand / Schneider As Out Going Including Internal Connection And Labour Charges For Surface / Flush Mounting Etc., Complete. Including Cost And Conveyance Of All Material, All Labour Charges, And Contractor Profit Etc., Complete But Excluding Gst. Providing Independent Earthling By Excavating A Trench To A Depth Of 2.25 M In All Soils, As Per Size Specified In The Data, Using 40Mm Dia B Class Gi Pipe Of 2.5 Mtrs Length With Necessary Accessories With Hume Pipe Ring Duly Providing Staggered Holes Including Filling With Equal Proportion Of Salt And Charcoal In Layers And All Labour Charges Etc., Complete For Small Quarters Including Cost & Conveyance Of All Material, All Labour Charges, And All Taxes Etc., Complete For Small Quarters But Excluding Gst. Supply, Transportation And Fixing Of 1200Mm ( 48 ) Sweep Isi Mark Ceiling Fan As Per Is 374 - 1979 And, With Double Ball Bearings But Without Regulator Of Makes Crompton / Bajaj Kassels 50 / Usha Atom Make With All Standard Accessories But Without Regulator Including All Labour Charges Etc., Complete Including Cost And Conveyance Of All Material And Labour Charges But Excluding Gst. Supply And Transportation Of Supply And Transportation Of 20W, 2000 Lumens, 1200Mm Length Led Retro Tube Light, Housing Made With Glass Body And All Standard Accessories Of Makesfinolex / Rr Kabel / Havells / Polycab / Gm / Million / V-Guard / Gold Medal / Kundancab / Hpl / Rpg / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab ( Elec-1.6.8 ) Complete And Including Cost And Conveyance Of All Material, All Labour Charges, And Contractor Profit Etc., Complete Nd As Per 8.2.2 Of Sta Revised Data Of Bld -Elec. But Excluding Gst.
Contract Date: Ref. Documents Contract Value : ₹ 4.78 Lakh
Government Departments No of Bidders 1
Telangana View Result →
17.
Drinking Water Supply and Sanitation #11148059 AOC
Tender For Earth Work Excavation For Foundations And Depositing On Bank For All Lifts And With An Initial Lead Of 10M And Lift Of 2M In Loamy And Clayey Soils Like Bc Soils, Red Earth And Ordinary Gravel Including All Operational, Incidental, Labour Charges Such As Shoring , Sheeting, Planking, Strutting, Etc. Complete For Finished Item Of Work Including Seigniorage Excluding Dewatering Charges Etc As Per Ss - 20 B ( Apss 308 ) . Plain Cement Concrete ( 1:4:8 ) Using 40 Mm Metal With Concrete Mixture. All Work Upto Plinth Level. Nominal Mix ( Cement: Fine Aggregate: Coarse Aggregate ) Using 40Mm Size Hbg ( Ss5 ) Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand, Coarse Aggregate, Water Etc. To Site, Including Seigniorage Charges, Countryes & Other Taxes On All Materials, All Operational, Incidental, And Labor Charges Such As Mixing, Laying And Ramming Concrete In Layers In Position Not Exceeding 15Cm, Finishing Top Surface, Curing Concrete, Etc., Complete For Finished Item Of Work For Foundations And Flooring Bed ( Apss No. 402 ) Plain Cement Concrete ( 1:5:10 ) Using 40 Mm Metal With Concrete Mixture. Using 40Mm Size Hbg ( Ss5 ) Metal From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand, Coarse Aggregate, Water Etc. To Site, Including Seigniorage Charges, Countryes & Other Taxes On All Materials, All Operational, Incidental, And Labor Charges Such As Mixing, Laying And Ramming Concrete In Layers In Position Not Exceeding 15Cm, Finishing Top Surface, Curing Concrete, Etc., Complete For Finished Item Of Work For Foundations And Flooring Bed ( Apss No. 402 ) All Work Upto Plinth Level. Filling The Excavated Soils In Trenches , Sides Of The Foundations And Basement With Initial Lead In Layers Not Exceeding 15 Cm Thick Consolidatiing Each Depposited Layer By Watering And Rampping Including Cost And Conveyance Of Water To Work Site And All Operational Incidental , Labour Charges Hire Charges And T & O Complete For Finished Item Apss 309 &310 ) Supplying And Filling Gravel In Trenches , Sides Of The Foundations And Basement With Initial Lead In Layers Not Exceeding 15 Cm Thick Consolidatiing Each Depposited Layer By Watering And Rampping Including Cost And Conveyance Of Water To Work Site And All Operational Incidental , Labour Charges Hire Charges And T & O Complete For Finished Item Apss 309 &310 ) Rcc M- 20 Nominal Mix ( Cement:Fine Aggregate: Coarse Aggregate ) Corresponding To Table 9 Of Is 456 Using 20Mm Size Graded Machine Crushed Hard Granite Metal ( Coarse Aggregate ) From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand Of Concrete Coarse Aggregate, Water Etc., To Site And Including Sales & Other Taxes On All Materials Including All Operational, Incidental And Labour Charges Such As Machine Mixing, Laying Concrete, Curing Etc., Complete But Excluding Cost Of Steel And Its Fabrication Charges For Finished Item Of Work, But Excluding Centering, Shuttering. For Column Footings Rcc M- 20 Nominal Mix ( Cement:Fine Aggregate: Coarse Aggregate ) Corresponding To Table 9 Of Is 456 Using 20Mm Size Graded Machine Crushed Hard Granite Metal ( Coarse Aggregate ) From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand Of Concrete Coarse Aggregate, Water Etc., To Site And Including Sales & Other Taxes On All Materials Including All Operational, Incidental And Labour Charges Such As Machine Mixing, Laying Concrete, Curing Etc., Complete But Excluding Cost Of Steel And Its Fabrication Charges For Finished Item Of Work, But Excluding Centering, Shuttering. For Columns Rcc M- 20 Nominal Mix ( Cement:Fine Aggregate: Coarse Aggregate ) Corresponding To Table 9 Of Is 456 Using 20Mm Size Graded Machine Crushed Hard Granite Metal ( Coarse Aggregate ) From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand Of Concrete Coarse Aggregate, Water Etc., To Site And Including Sales & Other Taxes On All Materials Including All Operational, Incidental And Labour Charges Such As Machine Mixing, Laying Concrete, Curing Etc., Complete But Excluding Cost Of Steel And Its Fabrication Charges For Finished Item Of Work, But Excluding Centering, Shuttering. Plinth Beams Brick Masonry In Superstructure With Cm ( 1:6 ) Prop: Using Second Class Bricks From Approved Source Having Minimum Crushing Strength Of 40 Kg / Sqcm. Including Cost And Conveyance Of All Materials Like Cement, Sand, Bricks, Water Etc., To Site, Excluding Seigniorage Charges, Including, Countryes & Other Taxes On All Materials, All Operational, Incidental And Labor Charges Such As Mixing Cement Mortar, Constructing Masonry, Scaffolding Charges, Lift Charges, Curing, Etc., Complete For Finished Item Of Work. ( Apss No. 501 & 504 ) . Providing High Yield Strength Deformed ( Hysd ) / Thermo Mechanically Treated ( Tmt ) / Mild Steel ( Ms ) Steel Bars ( Fe 415 / Fe 500 Grade As Per Is 1786-1979 ) Of Different Diameters For Rcc Works , Including Labour Charges For Straightening, Cutting, Bending To Required Sizes And Shapes, Placing In Position With Cover Blocks Of Approved Materials And Size And Tying And Lap-Splicing With Binding Wire Of 18 Swg, Forming Grills For Reinforcement Work As Per Approved Designs And Drawings, Including Cost And Conveyance Of Steel Bars, Including All Wastages Such As Overlaps, Couplings, Chairs, Spacer Bars Including Cost And Conveyance Of Binding Wire, Cover Blocks And All Incidental, Operational, Labour Charges Such As Cutting, Bending, Placing In Position, Tying Including Sales And Other Taxes On All Materials Etc., Complete For Finished Item Of Work In All Floors. ( Apss No.126 ) Plastering 12Mm Thick Single Coat In Cm ( 1:4 ) Thick With Dubara Sponge Finish Including C / C Of All Materials Like Cement, Sand, Water Etc., To Site, Other Taxes On All Materials, All Operational, Incidental Such As Scaffolding Charges, Lift Charges, Including Cutting Of Grooves, Finishing, Curing, Etc., Complete For For Finished Item Of Work. ( Apss 1001, 1003 & 1004 ) ( Cssr ) Internal Walls Flooring With 100Mm Thick Cement Concrete 1:4:8, Using 40Mm Metal, 100Mm Thick And 20 Mm Cement Concrete Surface ( Ellis Pattern, 1St Sort ) Supply , Manufacture, Making To Specified Design Andlabour Charges For Fabricating Steel Works Like Window Grills, Compound Wall Grills, Iron Doors, Windows Including Cost Of Welding Rods, Power Charges, Excluding Cost Of Fixing In Position Painting To New Walls With 2 Coats Of Emulsion Paint Of Approved Brand And Shade After Thoroughly Brushing The Surface To Remove All Dirt And Remains Of Loose Powdered Materials, Including Cost And Conveyance Of All Materials To Work Site And All Operational, Incidental, Labour Charges Etc. Complete For Finished Item Of Work As Per Ss 911 For Internal Walls Painting To New Wood Work With Two Coats Of Ready Mixed Synthetic Enamel Paint First Quality All Shades To Give An Even Shade Over Base Coat Primar With Luppam Finishing After Thouroughky Brushing The Surface To Remove All Remains Including Cost And Conveyance Of All Materials To Site, Countryes & Other Taxes, All Operational, Incidental And Labour Charges Etc., Complete For Finished Item Of Work. ( 3 Coats ) ( Apss No. 1201 & 1212 ) . Roofing Will Be Provided With 0.5Mm Thick Galvaniged Or Pre-Painted Gi Profiled Sheets Fixed To The Purlins With 14 Size Self Drilling Screws With Neoprene Washers. Side Laps Are Stiched With Self Taping Or Drilling Sacrews.End Laps Are To Be Seeled With 25X3 Mm Butly Tap The Sheets Are Provided With Anti Capillary Grove. Supply And Fixing Of Fully Panelled Window Frame And Shutters Of Size 1.20 X 1.35 Mt With Sal Wood Frame Of Size 75X100mm And S / F Of 4 Nos. Ms Hold Fasts, Incl. All Labour Charges Such As Making Window Frame And Shutters And Fixing 10 Nos.Of 12 Mm Square Safety Bars In To The Frame Etc, Including Applying Primory Coat, Cost And Conveyance Of All Materials . Supply And Fixing Of Mild Steel Tubes For Purlins Including The Cost Of Conveyance Of All Materials & Labour Charges A ) Providing & Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank With Double Layer Approved Brand & Manufacture With Cover And Suitable Locking Arrangement & Making Necessary Holes For Inlet & Outlets And Over Flow Pipes But Without Fittings & Base Support For Tanks S&F Premium Make Cpvc Pipes Of 22.20 Mm Od Pipe - Sdr 13.5 S&F Premium Make Cpvc Pipes Of 28.60 Mm Od Pipe - Sdr 13.5 Supply And Fixing Of 0.9Mdia Rcc Collars Including Cover Plates Supply And Laying Of 25Mm Outer Dia Heavy ( 2.20Mm Thickness ) Grade With Is:9537 Part 3 Regid Pvc Pipe Of Makes Sudhakar / Maco Plast / Modi. Make Concealed In Roof Slabs With All Required Pvc / Metallic Deep Boxes Including Masonary Work And Labour Charges, Cost And Conveyance Of All Material, All Labour Charges, And Contractor Profit Etc., Complete But Excluding Gst. Supply And Laying Of 25Mm Dia Medium Grade P.V.C.Pipe Isi Mark Of Sudhakar / Maco Plast / Modi Make Concealed In Wall With Pvc / Metallic Junction Boxes And All Required Accessories Including Masonary Work For Light, Fan And Separate Plug Point With Supply And Fixing Of Suitable Size Metallic Deep Box Including All Labour Charges Etc., Complete Including Masonary Work, Including Cost And Conveyance Of All Material, All Labour Charges, And Contractor Profit Etc., Complete But Excluding Gst. Wiring With Run Of 2 Of 14 / 0.3Mm ( 1.0 Sq.Mm ) Fr / Frls Pvc Insulated Flexible Isi Mark Copper Cable ( 100V Grade As Peris:694 / 1990 ) Of Kei / Polycab / Havells / Gm / Million / Hpl / Gold Medal / Power Flex / Rpg / Anchor / Great White / Sun Cab / Fortune Art Make In Existing Pipe With 6A 1 Way Flush Type ( Modular ) Swich Of Makes Gm G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great White Omega, Ceiling Rose 3 Plate Of Makes Anchor / Gold Medal Olive / Million Zoom. And Supply Of Decolam Board Of Size 8 X 10 As Switch Control Box Complete For Light, Bell, Fan And Exhaust Fan Points Including Cost And Conveyance Of All Material And Labour Charges But Excluding Gst. Supply And Fixing Of 6A 3 / 2 Pin Wall Plug Socket Gm G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great White Omega / Hpl With 6A Switch Of Make Gm G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great White Omega / Hpl Control On A Common Switch Board With Earth Continuity Including Wire Leads, Earth Connections Along With All Labour Charges Etc., Complete..And As Per 2.1.4 Of Sta Revised Data Of Bld -Elec-2.1.4 Including Cost And Conveyance Of All Material And Labour Charges But Excluding Gst. Supply And Run Of 2 Of 22 / 0.3Mm ( 1.5 Sq.Mm ) / 2 Of F.R P.V.C. Insulated Flexible Copper Cable Makes : Finolex / Rr Kabel / Havells / Apar Ebxl / Kei ( Hffr ) / Polycab ( ( Hr_Fr-Lf ) / L&T / V-Guard ( Hffr ) In Existing Pipe For Mains Inlcuding All Labour Charges Etc., Complete. Supply And Run Of 2 Of 22 / 0.3Mm ( 2.5 Sq.Mm ) F.R P.V.C. Insulated Flexible Copper Cable Makes : Finolex / Rr Kabel / Havells / Apar Ebxl / Kei ( Hffr ) / Polycab ( ( Hr_Fr-Lf ) / L&T / V-Guard ( Hffr ) In Existing Pipe For Mains Inlcuding All Labour Charges Etc., Complete. Supply And Run Of 2 Of 56 / 0.3Mm ( 4 Sq.Mm ) Fr P.V.C. Insulated Flexible Copper Cable In Existing Pipe For Mains Inlcuding All Labour Charges Etc., Complete. Supply And Fixing 4 Way Spn Db With Ip 20 Protection As Per Is:13032 And Suitable For 4Nos S.P Out Goings And For 1 No Incommer Etc Complete Of Makes Legrand / Schneider. With Ip-20 Protection Suitable For Single Phase 40A Dp Isolator Of Make Legrand / Schneider. As Incomer And 6-32A 10Ka Tp Mcb, C / D Curve Isi Mark Of Make Legrand / Schneider As Out Going Including Internal Connection And Labour Charges For Surface / Flush Mounting Etc., Complete. Including Cost And Conveyance Of All Material, All Labour Charges, And Contractor Profit Etc., Complete But Excluding Gst. Providing Independent Earthling By Excavating A Trench To A Depth Of 2.25 M In All Soils, As Per Size Specified In The Data, Using 40Mm Dia B Class Gi Pipe Of 2.5 Mtrs Length With Necessary Accessories With Hume Pipe Ring Duly Providing Staggered Holes Including Filling With Equal Proportion Of Salt And Charcoal In Layers And All Labour Charges Etc., Complete For Small Quarters Including Cost & Conveyance Of All Material, All Labour Charges, And All Taxes Etc., Complete For Small Quarters But Excluding Gst. Supply, Transportation And Fixing Of 1200Mm ( 48 ) Sweep Isi Mark Ceiling Fan As Per Is 374 - 1979 And, With Double Ball Bearings But Without Regulator Of Makes Crompton / Bajaj Kassels 50 / Usha Atom Make With All Standard Accessories But Without Regulator Including All Labour Charges Etc., Complete Including Cost And Conveyance Of All Material And Labour Charges But Excluding Gst. Supply And Transportation Of Supply And Transportation Of 20W, 2000 Lumens, 1200Mm Length Led Retro Tube Light, Housing Made With Glass Body And All Standard Accessories Of Makesfinolex / Rr Kabel / Havells / Polycab / Gm / Million / V-Guard / Gold Medal / Kundancab / Hpl / Rpg / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab ( Elec-1.6.8 ) Complete And Including Cost And Conveyance Of All Material, All Labour Charges, And Contractor Profit Etc., Complete Nd As Per 8.2.2 Of Sta Revised Data Of Bld -Elec. But Excluding Gst.
Contract Date: Ref. Documents Contract Value : ₹ 4.96 Lakh
Government Departments No of Bidders 1
Telangana View Result →
18.
Public Administrative Department #11142241 AOC
Construction And Carry Out Ancillary Works For Urban Ayushman Health Temples (Uhwc) In Porta Cabins At 14 Places In The Jurisdiction Of Thane Municipal Corporation.-1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec.No. :Means Bd.A.1 Page No.259 2 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means 3 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 4 Transportation of excavated material including loading and unloading etc. complete. (c) lead up to 5 km) 5 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 6 Providing soling using 80 mm size trap metal in 15 cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer incharge. 7 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 8 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 9 Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Providing and fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use).Spec. No As director by engineer incharge. Providing and applying priming coat on concrete/ masonary / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.Spec. No As director by engineer incharge. Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. 14 Painting letters upto 20 centimetre height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801 15 Providing and laying concrete pipes of I. S. NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No. Bd.V.41 Page No.573. 16 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. cover of 75 Kilogram with lid and frame fixed in cement concrete.. Spec. No. 17 Providing and laying in trenches 25 mm dai. UPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 18 Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) 19 Providing and making ISI Mark ferrule connection of 25mm dia.to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. 20 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 21 Supplying, erecting, testing and commissioning of minimum three and above star rated centrifugal water pump (monoblock),230 V,single phase,50 Hz,AC.supply of 0.375kw/0.5 HP with discharge 36/9 lpm for head of 6/21 m & 25 mm suction /25 mm delivery pipe on provided CC foundation as per specification no.WP.CGP. 22 Supplying, installing and testing earthing with copper earth plate 30 x 30 x 0.315 cm complete with all accessories of copper materials and recording the results as per specification no.Ea-EP Supplying, & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 Kg.capacity cartridge type conform to IS 2878/15683 complete erected with necessary clamp made from 50 x 6 mm M.S. flat with nut & bolts rounded in wall complete. Supplying, & erecting Hand dryer machine having speed jet of warm air with low noise blower to quick dry wet hands,power 1800 W,voltage 230V,50 Hz.Automatic cut off after 5-10 second. Providing,Supplying and fixing electrical meter with all necessary accessories,required cable for connection from main supply including required permission from MSEDCL,TORRENT and Local authorities.(The contractor shall submit the original receipts of payments made to MSEDCL, Torrent Power co.The payments will be made as per the actual expenses made by contractor for each permission and purchasing of electric meter.) Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable, 1100 V 3 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying and laying (including excavation) 50 mm outside dia double wall corrugated pipe (DWC) of HDPE for enclosing cable below ground/road surface to required depth completed Alluminium foldable ladder for store Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht. Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Providing, Supplying and installation of Porta Cabin Fabricated at Factory Scope of work per cabin shall includes as follows 1. Specification mentioned as below 2. Internal and external arrangement of cabin as per drawings as attached 3. Works of Plumbing, sanitary, electrification, CCTV 4. Furniture as below a. Executive Chairs (as per sr.no.3) - 3 nos, b. Visitor chair (as per sr.no.4) - 6 no c. Two seater chair (as per sr.no.5) – 2 Nos d. Three seater chair (as per sr.no.6) – 5 Nos e. Patient Examination Couch/Table (as per sr.no.8) – 2 Nos f. Storage Cabinet (as per sr.no.9) – 1 Nos g. Table (as per sr.no.10) – 4 Nos h. Table (as per sr.no.11) – 1 Nos i. Medical Store Racks in pharmacy room (as per sr.no.12) – as per drawing j. Trash Bin (as per sr.no.13) – 6 Nos k. Seating tools (as per sr.no.7) – 6 Nos Detailed Description and Specification: Unit Size – L x B x Ht = 30 ft x 20 ft x 9 ft (Clear internal Height) Cabin should be structurally stable and suitable to meet severity of climatic conditions. Sustainable in wind condition of 55m/s- in Seismic zone IV and ambient temperature range (-) 40 degree C to (+) 50 degree C. Bottom Frame 80 x 40 x 2mm GI Rectangular Hollow Pipe (Apollo Make) Stiffener Bottom 50 x 50 x 2mm GI Rectangular Hollow Pipe (Apollo Make) for Shorter Span and 80 x 40 x 2mm for longer Span making the grid of 2ft x 2ft. Please note Base frame shall be quoted with special type of anticorrosive paint to avoid rusting and for better life (i.e. Black Coal Tar Epoxy Paint) Top Frame 80 x 40 x 2 mm GI Rectangular Hollow Pipe (Apollo Make) Stiffener (Top Frame) 50 x 50 x 2mm GI Rectangular Hollow Pipe (Apollo Make) for Shorter Span and 80 x 40 x 2mm for longer Span making the grid of 2ft x 2ft. Please note Base frame shall be quoted with special type of anticorrosive paint to avoid rusting and for better life (i.e. Black Coal Tar Epoxy Paint) Paneling Outside Outside Wall of the cabin shall be made from 16 guage GI sheet with solid color of approved shade, fitted on inside GI pipe framing making the grid of 2ft x 2ft. Paneling Inside Inside wall of the cabin shall be made from 3 MM Thk ACP sheet with aluminum foil thickness of 0.25 mm with solid color of approved shade fitted on inside Gl pipe framing making the grid of 2ft x 2ft. All the ACP joints shall be filled with Black silicon. Wall Panels shall be completely insulated with Glass wool of 48 kg/m3 Density and slab thickness 50mm. Corners Pole 72 x 72 x 3.2mm GI Rectangular Hollow Pipe (Apollo Make) with black coal tar epoxy coating Plumbing Arrangement UPVC concealed internal plumbing system shall be provided with all necessary inlet and outlet points as per the Drawing. External water connection shall be Provided by TMC. Drinking Arrangement Providing and Fixing branded water purifier of make like Aquaguard, Kent, LG or equivalent with all necessary connections, fittings accessories with storage arrangement etc. complete Sanitary Fittings All plumbing and sanitary fittings such as Ceramic Western Commode with seat cover, Ceramic Indian Commode, Ceramic urinal with push pillar cock, Ceramic Wash Basin, Wash basin Push Pillar Cock shall be of brand like Kajaria, Hindware, Paryware or equivalent. All western Toilets must be equipped with jet Spray, 2 in 1 Taps and Flush Tank. Accessories for PWD persons shall be provided in all toilets. (Excluding External Sewerage Connection). Roof Outside Roof Slope 1:2 one way 126 Roof shall be made from 1.2 mm 120 GSM GI sheets of Jindal make, which shall be fully welded and sloped to avoid leakage. All the roof joints shall be covered with 75mm Butyl Vinyl Tape. Roof shall be covered with Heat Resistant paint to maintain low temperature inside the cabin. Roof Gutter Specially designed gutter section shall be provided to drain water at the single side of the cabin. This shall be made from 1.2 mm 120 GSM GI sheet Jindal make including fitting arrangement. False Ceiling False Ceiling shall be made from 3 mm Thk ACP sheet with Aluminium foil thickness of 0.25 mm with solid colour of approved shade fitted on inside GI pipe framing making the grid of 2ft x 2ft. All the ACP joints shall be filled with Black silicon. Flooring Flooring shall be made from 18 mm High Strength Bison board/ Cement fibre sheet, which is covered with 2 mm PVC vinyl flooring for cabin. For toilet Cement sheet shall be covered by 10 mm thick 1 X 2 ceramic tiles which shall be fixed by using tile adhesive and cement mixture of at least 50mm Thk. Doors & Door frame Main Door Flush door 32 mm thick waterproof material with 4mm Glass as per approved design and drawing and door frame shall be made from aluminium Section. Locking arrangement along with D Handles in SS 304, door closer, door stopper etc. Door Size: 5’x 6’ Internal doors shall be sliding doors/ flush door of size as per drawing and as per the specifications decided by engineer-in charge Toilet Door and door frame shall be made from aluminium frame with 4mm Glass and ACP including locking arrangement, Handles in SS 304, Door Size: 2’-6’’ x6’ Windows Powder coated aluminium Two Track sliding windows with 4 mm tinted Glass. Size of windows as per drawings. M.S. Grill of weight @ 20 kg per sqm shall be provided to all windows/louvered window from outside. Curtains of good quality and curtain rod/track with fixtures shall be provided from inside of windows. Insulation False Ceiling and Wall Panels shall be completely insulated with Glass wool of 48 31 Providing, Supplying and installation of Porta Cabin Fabricated at Site Scope of work per cabin shall includes as follows 32 Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 Kilogram/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm, skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring. 33 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. 34 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 35 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 36 Testing :- Compressive test of C.C.Cube 37 Provide and supplying Executive Chairs A generously cushioned, molded PU seat combined with breathable mesh fabric, Crafted from strong and durable Polyamide (Nylon) featuring a reinforced mesh back, chair equipped with BIFMA Certified Class-4 Hydraulic Gas Spring and BIFMA Certified 60mm Wheel Castors. Chair having 3 years warranty (Executive chairs) / or equivalent / as Directed by Engineer Incharge. Key Features Colour : GREY / Black Material : Metal Dimensions : 64D x 61W x 119H Centimeters Size : Standard Back Style : Mesh Back Special Feature : Adjustable Lumbar, Adjustable Height, Adjustable Arm Rest, Adjustable Head Support Seat Material Type : Breathable Microfiber Cloth Covered in PU Foam 38 Providing and supplying visitor chair having size Depth- 62cm, width-55cm, height- 80cm & seat height 45 cm. (+/- 2cm ), having seat & back, shall be made up of 1.2 cm hot pressed plywood, approved tapestry upto Rs.300/m and mould polyurethane foam with P.V.C. lipping all around etc. complete. The chair shall be provided with two one piece armrest made of polypropylene. The chair shall be supported by cantilever type powder coated tubular frame dia 2.54cm x 14 B G M.S.E.R.W. tube. All aluminium steel component shall have Epoxy Polyster Powder Coated. The chair shall be Ergonimc Dry film thickness shall be more than 45 Micron. And as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in 39 Public Seating Chair. - 2 Seater Providing and Fixing 2 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish with 1 year warranty etc complete as directed by engineer in charge.. 40 Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 41 Seating tool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. 42 Providing and supplying examination couch. This examination couch features an adjustable backrest that can be easily operated using a gas spring system. The twosection foam-padded top provides added comfort for patients during examinations. It is equipped with three drawers and three cabinets, offering ample storage space for medical equipment and supplies, keeping everything organized and easily accessible. A tray for the B.P. apparatus is conveniently placed near the headrest, ensuring easy access for medical professionals. The couch is finished with pre-treated epoxy powder coating, making it durable and easy to clean, while also ensuring resistance to corrosion Designed with a carrying capacity of 150-180 kg. etc complete. as directed by engineer in charge. Key Features Adjustable Backrest: The backrest is adjustable using a gas spring system, providing flexibility for various examination positions. Foam Padded, Upholstered Top: Offers comfort and support during patient examinations. Ample Storage: Equipped with three drawers and three cabinets to store medical supplies and equipment. BP Tray: A tray near the headrest for easy access to BP apparatus. 43 Providing, supplying and installing the cabinet, dimensions of 1200mm (W) x 1660mm (H) x 450mm (D) and is constructed from prime quality 0.8mm thick CRCA steel for the body panels and shelves. The shelves are adjustable in height and have a uniformly distributed load capacity of 50kg per shelf. The vertical sides feature continuous slots for mounting shelves at variable heights. The entire carcass is finished with a 50 ±10 microns epoxy polyester powder coating. The facia of the cabinet consists of metal shutters with metal borders, incorporating toughened glass panels. The handles are Dshaped in an aesthetically pleasing design with a stainless steel (SS) finish. The locking mechanism uses a metal cam lock for security. Additionally, the cabinet is equipped with adjustable levelers featuring plastic bases, allowing height adjustments of up to 15mm.This furniture is built according to the specifications and samples approved by the client. It meets the required certifications including ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, BIS standards, and is a BIFMA Gold certified member. The product comes with a 5-year warranty. Installation and other details are as directed by the engineer in charge. 44 Providing & Fixing of HNI Make table of Size. The Worktop shall be made of 25mm Prelam particle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. The above furniture should be as per specification with 3 years warranty etc. sample approved by client. TABLE SIZE :- W1060mm x D600mm x H750 mm -1 No W900mm x D300mm x H750 mm – 1 No W600mm x D450mm x H750 mm – 2 No As Directed by Engineer Incharge 45 Providing & Fixing of HNI Make table of Size. The Worktop shall be made of 25mm Prelam particle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross Member are in CRCA steel and the Beam is made of MS of 1.5mm thickness in powder coated finish of 50 microns thickness. The above furniture should be as per specification with 3 years warranty etc. sample approved by client. TABLE SIZE :- W1200xD700xH740mm As Directed by Engineer Incharge 46 Providing and supplying adjustable MS storage rack having size 1200 mm to 1800mm x 300 mm x 1600 mm including all transportation upto site etc complete as directed by engineer in charge. Key features 1. Material  Frame : Mild steel (MS) powder coated  Shelves: Cold-rolled steel (CRCA) or galvanized  iron (GI) 2. Angle Specifications  Size 40 x 40 x 2.50 mm  Length : Standard lengths of 6 feet, 8 feet, or 10 47 Providing and supplying trash bins with a maximum height of 450mm 35 - 40 liter, made of high-quality molded plastic for durability and ease of maintenance. The bins shall be equipped with a functional lid mechanism and shall be provided as per the approved selection and design. The work shall be carried out as directed by the Engineer-In-Charge etc complete . 48 Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. 49 Providing and Laying M60 grade cement concrete of approved mix design with avg. Flextural strength of 4.4 MPa in 3 days from R.M.C. plant incld. use of micro silica/alcofine, approved make super plastiser and retarder, fibriliated 100 % virgin polypropylene fibres, fly ash and transported by transit mixer and placing at work site. Compacting, finishing, initial curing by approved curing compound/contractors water and tarring the sides of slab with hot bitumen as specified and as directed (w/c ratio 0.28 max.). (vatta for curing will be paid separately) for Ultra thin White Topping (UTWT) pavement. etc completed. Providing second class Burnt Brick masonry with conventional/I.S .type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete. Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 One Square Meter made out of 4 mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity microprismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorized distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminum-Zinc alloy (55% aluminum 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) Providing Excavator (JCB JS 80 or equivalent) of 0.9 Cum etc complete Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec. One Number: As directed by Engineer- in-charge. Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. Providing and laying Cast in situ/Ready Mix cement concrete M-15 trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete. Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec.No. : Means Bd.A.1 Page No.259 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. Transportation of excavated material including loading and unloading etc. complete. ( (c) lead up to 5 km) Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Providing soling using 80 mm size trap metal in 15 cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer in charge. Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineerin- charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. Providing and fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use).Spec. No As director by engineer in charge. Providing and applying priming coat on concrete/ masonary / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.Spec. No As director by engineer incharge. Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Painting letters upto 20 centimetre height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801 Providing and laying concrete pipes of I. S. NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No. Bd.V.41 Page No.573. etc
Contract Date: May 21, 2026 Contract Value : ₹ 4.09 Crore
Local Bodies No of Bidders 2
Maharashtra View Result →
19.
Water Resources and Irrigation #11140970 Technical Bid
Tender for Excavation In Foundation For Retaining, Breast Walls Etc, In All Types Of Soils And Rocks Including All Lead, Lift And Disposal Of Surplus Material As Per Direction Of Engineer - In - Charge, As Per Drawing And Technical Specifications Clause 305.1 Of Mord Specifiction , Providing Concrete For Plain/ Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 M 10 Nominal Mix (1:3:6) Including Shuttring, Centring And T &P Etc. , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 803, 1202 And 1203 Plain Cement Concrete Grade M 15 (1:2.50:5) , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Technical Specifications Clasues 800, 1205.4 And 1205.5 Reinforced Cement Concrete M 25 Including Shuttring, Centring And T&P Etc. Raft , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Technical Specifications Clasues 800, 1205.4 And 1205.5 Reinforced Cement Concrete M 25 Including Shuttering, Centring And T&P Etc. For Wall , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Supplying, Fitting, And Placing Hysd Bar Reinforcement In Superstructure Completeas Per Drawing And Technical Specifications Clauses 1002, 1010 And 1202 , Supply And Installation Of Self Driven Rock Anchor Made Of 40Cr Material With Ouler Dia Of 32 Mm And Inner Dia Of 18.5 Mm, Yield Load Carrying Capacity Of Minimum 230 Kn In Soil / Overburden Frock Suitable For Drilling Placing And Cement Grouting. Installation With All Accessories Such As 51 Mm Dia Drill Bill, Couplers, 10Mm Thick Base Plate And Nut And Bolt Complete In All Respect But Excluding The Cost Of Cement Grouting Which Will Be Paid Extra As Per Relevant Boq Item. , Grouting With Cement-Grouting Cement Slurry In Grout Holes Under Specified Pressure Forconsolidation / Contact Grouting I Ncluding Cost Of All Materials, Machinery, Labour, Redrilling Wherevernecessary, Ventilation,Lighting, Drainage And Other Ancillary Operations Etc. Complete As Per Drawing And Technical Specifications , Supply & Fixing 3D Net Including All Cost Of Labour, Material And T&P Required For Proper Completion Of Work. 3D Net Is Lightweight Three Dimensional Mat Made Of Continuous Monofilaments. 3D Net Are Made Of Three Dimensional Structure Consisting Of Uv Stabilized Non-Degradable Polypropylene/Polyethylene/Nylon Or Similar Polymer Fibres That Are Extruded Or Heat Bonded At The Contact Points To Provide A Dimensionally Stable Matrix For Soil Erosion Protection With Minimum Tensile Strength 2 Kn/M In Length Direction & 1 Kn/M In Cross Direction Having Thickness 6.5-10Mm Mass Per Unit 450-600 Gsm. , Hydroseeding Of Soil Slopes Including Mixing Of Seeds, Mulch (Meeting Performance Parameters As Mentioned In Technical Specification), Fertilizer And Soll Amendment Products If Required In Hydroseeder Machine With Water And Spraying The Mixture With 100 Psi Pressure Pump On Hilly Slopes On Exposed Soils, (End Product Must Form A Blanket Within 2 Hours Of Application, And Soil Erosion Must Be Controlled After 2 Hours Of Application) Including Maintenance- For Three Months (Watering 2-3 Times A Day After 24 Hours Of Hydrosaeding) Or Bill Propagation Of Grasses And Shrubs. , Supply & Installation Of Non-Woven Geo-Textile Having Mass/Unit Area - 250Gsm Over The Slope To Be Treated Including All Cost Of Labour, Material And T&P Required For Proper Completion Of Work. , Hand Packed Stone Filling In Back Of Wallls Including Cost Of All Materials, Royality,T&P Etc. Complete As Per Direction Of Engineer-In- Charge. , Tubular Steel Railing On Medium Weight Steel Channel (Ismc Series) 100 Mm X 50 Mm Providing, Fixing And Erecting 50 Mm Dia Steel Pipe Railing In 3 Rows Duly Painted On Medium Weight Steel Channels (Ismc Series) 100 Mm X 50 Mm, 1.2 M High Above Ground, 2 M Centreto-Centre, Complete As Per Approved Drawings Clause 1706 , Random Rubble Stone Masonry Laid In 1:5 Cement And Sand Mortar, In Breast Walls,Retaining Walls,Parapets,Scuppers,Etc. Including Supply Of All Material, Labour, T&P And Royaltiies Etc. Complete As Per Drawing And Technical Specifications Clauses 702, 704, 1202 & 1204 Of Mord Specifiction , Providing And Installing Subsurface Drainages Pipes-Perforated Pvc Pipe (Lined With Non Wovan Geotextile) Of 100 Mm Internal Diameter As Per The Drawing Etc. Complete Including The Cost Of Drilling And Directed By Engineer In Charge , Providing And Laying Of Mechanically Woven Double Twisted Hexagonal Shaped Gabions Of Galvanized Steel, Of Size 3Mx1mx1m With Two Diaphragms At 1M Interval, Having Mesh Opening 100Mmx120 Mm, Meshwire Diameter 3 Mm For Gabions, Edge/Selvedge Wire Diameter 3.9 Mm And Lacing Wire Diameter 2.2 Mm. (The Work Includes Filling Boulders In The Gabions). , Providing Concrete For Plain/ Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 M20 (1:2:4
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Uttarakhand View Result →
20.
Public Administrative Department #11132849 AOC
SINKING 4 NOS. OF TUBEWELL (I) NEAR KRISHNARAYANPUR ALTAP HOUSE GP-BASULDANGA (II) NEAR AJMINA HOUSE KRISHNARAYANPUR, GP-BASULDANGA (III)NEAR ASMAUL LASKAR SEKHPARA AT JOKTABALA,GP-BASULDANGA (IV) NEAR CHANDA JAMADAR PARA GP-BASULDANGA UNDER D.HARBOUR-I PS; 1 SINKING 4 NOS OF TUBEWELL 2 Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. 3 (d) For depth upto 150 metre for 40 mm dia. tube well with top enlargement of 100 mm dia. 4 (ii) 100 mm dia. boring etc. top enlargement 5 c) For depth upto 150 metre for 40 mm dia. Tube well with top enlargement of100 mm dia.(i) 40 mm dia boring etc 6 (b) For depth more than 150 metre. (i) 40 mm dia. boring etc. beyond 150 metre 7 Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications(i) 40 mm dia. 8 Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. (i) 40 mm dia. 9 Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.(i) 40 mm 10 Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(A) PVC Pipesi)100 mm 11 (ii) 40 mm dia 12 Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete. 13 Construction of masonry platform of size 1.25m x1.25 m with ,75 mm thick Cement concrete (1:2:4) over a layer of single brick flat soling including 15 mm thick cement plaster (6:1) with neat cement finish to inside & outside as per direction of EIC 14 Spill water masonry surface drain 15 cm wide ,15 cm deep having 12.5 brick work in cement morter (4:1) on 75 mm brick PCC (1:2:4) over a layer of brick flat soling including 15 mm thick cement morter (6:1) with neat cement finish to inside and outside as per direction of EIC 15 Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. 16 Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with V notch including hire and labour charges for all tools and plants and scaffolding as required 17 Supplying fitting & fixing India Mark IIhand pump set 18 Supplying and fittingof Reducing Socket (mm X mm)i) 100 X 40 19 Construction of soak pit 1000 mm outer dia 125 mm thick brick work(1:4 cement mortar) depth 1200 mm from Ground level and top cover 75 mm thick slab with reinforcement . And insidefilling with brick batsupto 600 mm height from bottom level.complete andfilling medium sand 300 mm above bats completein all repect as per instruction of Engineer-in-charge 20 Supplying ,fitting & fixing of Name Plate and Photograps
Contract Date: May 27, 2026 Contract Value : ₹ 8.69 Lakh
Local Bodies No of Bidders 4
West Bengal View Result →
21.
Defence #11117617 AOC
Tender For Provision Of Training Shed And Pt Shed At Varanasi; Design, fabrication, supply and erecting, Pre-engineered building steel structure/LGSF made from 345 Mpa high strength Hot rolled paletes and factory produced zincalume cold rolled light gauge steel zincalume frame (1 mm BMT)for provision oftraining and PT Sheds of size 72 metre x 18 metre x7.95 metre height from FFL to bottom of truss using 0.45 mm base metal thickness, pre-painted 0.50 mm corrugated galvalume aluminium zinc coating (AZ-150 GSM) aluminium zinc alloy coated colour having tensile strength of 550Mpa as in roofingfixed with self tapping screws including S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.60 mm thick (AZ not less than 150) of colour having tensile strength of 550Mpa as in ridge/valley gutter roof covering/cladding to wall fixed with self tapping screws, (factory made valley gutter, shape and size directed by Engineer-in Charge including supply of bolts, gutter bolts, screws, washer, pipe nails distance pieces, plug, holder bats for pipe and all jointing materials, down take pipe, downspout pipe and metal clamp of appropriate size and shape and LGSF structure with brick work in CM 1:4 onas per mentioned in architectural drawing all as specified with following design parameters all as specified and vetted design and drawing by any IIT/NIT and approved by Chief Engineer Lucknow Zone with permanent specification complete all as specified and as shown on drawing:-(i) Frame type Pre-Engineered Building (ii) Size of training and PT shed as perarchitectural drawing (iii) LGSF structure with 1 mm to 2.5 mm thick(iv) Anti-corrosion treatment and painting as per IS -1477 Part 1 & 2 .(v) PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including form work in base of footing.(vi)RCC work M-30 in footing, plinth beam & Stair case/steps as per approved mix design and as per IS:9103(vii)All necessary civil works for setting for super structure layout, excavation, back filling, removal of surplus soil, RCC foundation/footing, plinth beam, RCC sitting step with granite finish including bull nosing finish & Stainless steel railing complete.Note : (i) Design parameters of PEB structure is attached as appendix ‘A’ (ii) Following items mentioned under srl no 1.01 to1.13 here-in after shall also be included in lump sum rate quoted against Srl item No 1 of BOQ. 2 Site clearance/site developments 3 Anti termite treatment 4 All primary structural components should be confirmed to IS: 2062 E-350 BR, Having a minimum tensile strength of 490 MPs and pass physical & Chemical tests stipulates therein 5 Purlins and side girt membersshall be made from cold Formed Sections, Confirming to IS : 811, having a minimum tensile strength of 345 MPs. The sheets used for cold forming sections shall confirm to IS : 1079, 2009 quality HR3 6 Permanently colour coated high tensile steel sheet havingminimum base metal thickness of 0.45mm (i.e excluding Aluminium -Zinc/galvanizing & colour coating thickness) & minimum Yield strength of 550 Mpa, coated with 55% Al-Zn alloy @ 150 g/Sqm as per ASTM A792M; Color coated with total minimum thickness of 40 microns (nominal) comprising of Silicon, Modified polyester (SMP with silicon content of 30% minimum) paint or super Polyester paint of minimum 20 microns (nominal) Dry Film Thickness (DFT) on exposed side over 5 microns (nominal) primer coat and 10 microns (nominal) approved colour Epoxy paint on other side over 5 microns (nominal) primer coat as per ASTM A755M 7 Kota stone flooring shall be 18 to 20 mm thick machine cut and polished at site after fixing (Mirror polish/granite polish). Size of Kota stone slabs used in floors shall be not less than 500 mm x 500mm.Kota stone slab shall be laid over 20mm thick screed in CM (1:6) over 100 mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate over rammed earth. Jointing shall be with grey cement mixed with pigment to match the shade of Kota stone slab. The floor shallachieve mirror finish surface. 8 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as inplinth protection & Saucer drain. Plinth protection surface finishedeven and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) 9 Stainless steelrailingwith SS hand rail pipes grade 304 as perarchitectural drawing shall be provided. 10 10 to12 mm thick ready mix plaster on internal surface and external surface of wall. 11 Preparation of newly plaster surface of wall and applying two coats of synthetic enamel paint over a coat of primer on internal and external surface of wall. 12 Ramp provided same as per flooring specification 13 PAINTING SCHEME FOR STRUCTURAL STEEL WORK:(a) Soap paint :- One coat of inorganic zinc silicate primer-75 microns(b) Soap paint :- One coat of polyurethane paint -30 microns(c) Site paint :- One coat of polyurethane paint- 30 microns (after erection & fixing work) 14 Applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer on other than structural steel surface 15 Design, fabrication, supply and erecting, Pre-engineered building steel structure/LGSF made from 345 Mpa high strength Hot rolled paletes and factory produced zincalume cold rolled light gauge steel zincalume frame (1 mm BMT)for provision oftraining and PT Sheds of size 36 metre x 12 metre x 7.95 metre heightfrom FFL to bottom of trussusing 0.45 mm base metal thickness, pre-painted 0.50 mm corrugated galvalume aluminium zinc coating (AZ-150 GSM) aluminium zinc alloy coated colour having tensile strength of 550Mpa as in roofingfixed with self tapping screws including S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.60 mm thick (AZ not less than 150) of colour having tensile strength of 550Mpa as in ridge/valley gutter roof covering/cladding to wall fixed with self tapping screws, (factory made valley gutter, shape and size directed by Engineer-in Charge including supply of bolts, gutter bolts, screws, washer, pipe nails distance pieces, plug, holder bats for pipe and all jointing materials, down take pipe, downspout pipe and metal clamp of appropriate size and shape and LGSF structure with brick work in CM 1:4 onas per mentioned in architectural drawing all as specified with following design parameters all as specified and vetted design and drawing by any IIT/NIT and approved by Chief Engineer Lucknow Zone with permanent specification complete all as specified and as shown on drawing:-(i) Frame type Pre-Engineered Building (ii) Size of training and PT shed as perarchitectural drawing (iii) LGSF structure with 1 mm to 2.5 mm thick(iv) Anti-corrosion treatment and painting as per IS -1477 Part 1 & 2 .(v) PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including form work in base of footing.(vi)RCC work M-30 in footing, plinth beam & Stair case/steps as per approved mix design and as per IS:9103(vii)All necessary civil works for setting for super structure layout, excavation, back filling, removal of surplus soil, RCC foundation/footing, plinth beam, RCC sitting step with granite finish including bull nosing finish & Stainless steel railing complete.Note : (i) Design parameters of PEB structure is attached as appendix ‘A’ (ii) Following items mentioned under srl no 2.01 to2.13 here-in after shall also be included in lump sum rate quoted against Srl item No 2 of BOQ. 16 Site clearance/site developments 17 Anti termite treatment 18 All primary structural components should be confirmed to IS: 2062 E-350 BR, Having a minimum tensile strength of 490 MPs and pass physical & Chemical tests stipulates therein 19 Purlins and side girt membersshall be made from cold Formed Sections, Confirming to IS : 811, having a minimum tensile strength of 345 MPs. The sheets used for cold forming sections shall confirm to IS : 1079, 2009 quality HR3 20 Permanently colour coated high tensile steel sheet havingminimum base metal thickness of 0.45mm (i.e excluding Aluminium -Zinc/galvanizing & colour coating thickness) & minimum Yield strength of 550 Mpa, coated with 55% Al-Zn alloy @ 150 g/Sqm as per ASTM A792M; Color coated with total minimum thickness of 40 microns (nominal) comprising of Silicon, Modified polyester (SMP with silicon content of 30% minimum) paint or super Polyester paint of minimum 20 microns (nominal) Dry Film Thickness (DFT) on exposed side over 5 microns (nominal) primer coat and 10 microns (nominal) approved colour Epoxy paint on other side over 5 microns (nominal) primer coat as per ASTM A755M 21 Kota stone flooring shall be 18 to 20 mm thick machine cut and polished at site after fixing (Mirror polish/granite polish). Size of Kota stone slabs used in floors shall be not less than 500 mm x 500mm.Kota stone slab shall be laid over 20mm thick screed in CM (1:6) over 100 mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate over rammed earth. Jointing shall be with grey cement mixed with pigment to match the shade of Kota stone slab. The floor shallachieve mirror finish surface. 22 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as inplinth protection & Saucer drain. Plinth protection surface finishedeven and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) 23 Stainless steelrailingwith SS hand rail pipes grade 304 as perarchitectural drawing shall be provided. 24 10 to12 mm thick ready mix plaster on internal surface and external surface of wall. 25 Preparation of newly plaster surface of wall and applying two coats of synthetic enamel paint over a coat of primer on internal and external surface of wall. 26 Ramp provided same as per flooring specification 27 PAINTING SCHEME FOR STRUCTURAL STEEL WORK:(a) Soap paint :- One coat of inorganic zinc silicate primer-75 microns(b) Soap paint :- One coat of polyurethane paint -30 microns(c) Site paint :- One coat of polyurethane paint- 30 microns (after erection & fixing work) 28 Applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer on other than structural steel surface 29 INTERNAL ELECTRIFICATIONM&L for point wiring completeforOne light/Fan/Exhaust Fan/Bell point/ Bldg Security Light / Industrial wall mounting fancontrolled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 25 mm in roof / floor slab and ceiling, pressed GI concealed terminal modular boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including suitable cover plate of any module including 1.5 Sqmm PVC, FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :-(i) In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.(ii) Height of socket should be 1.2m above from FFL(iii) Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost. 30 M&L for Point wiring completeforone 5 Pin 5 Amp switch Socket outlet point on an independent board, with PVC insualted and unsheathed FRLSH CABLE 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall / roof / floor slab and ceiling, pressed GI concealed terminal modular boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :-(i)In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.(ii) Height of socket should be 1.2m above from FFL 31 M&L forPoint wiring completefor power point controlled by oneswitch with PVC insualted and unsheathed FRLSH cable 2.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 25 mm in roof /wall/ floor slab and ceiling, suitable for modular switch with modular metal flush box with inner and outer cover plate & frame etc of requied colour complete, including 2.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :- In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.One circuit controlled by max one points only. 32 S&F Switch piano, flush type 5 Amps single pole, one way complete all as specified and directed. 33 S&F Socket outlet, flush type 2 in 1, 5 pin, 6 Amps, multi-purpose complete all as speci-fied and directed. 34 S&F Switch piano, flush type single pole, one way 16 Amps complete all as specified and directed. 35 S&F Socket outlet, flush type 2 in 1, 5 pin, 5 and 16 Amps, multipurpose complete all as specified and directed. 36 S&F ceiling rose two to three terminal, complete all as specified and directed. 37 S&F BLDC type air circular wall mounting fan 750mm Sweep, single phase 230 V AC, 1440 RPM, air delivery CMM, power consumption 250 watt, with string, 3 speed choice colour mate, 5 star rating & ISI marked alongwith complete accessories and connecting up the fan to ceiling rose incl PVC insulated 3 core 23/0.0076 copper cable & suitable size of flexible cord with plug top from ceiling rose to wall mounted fan arrangement on pillar / wall is deemed under quoted item rate, complete all as specified and directed 38 S & FLED wide beam optics High Bay Light 100 Wdaylight 150 lum/Wwith PDC housingsuitable for ceiling (surface/suspended) rated aluminium housing indoor type with all fixing arrangement, complete all as specified and directed. 39 S&F LED Building security light fitting 35 Watt with aluminum pressure die cast housing, high purity PC Fresnel diffuser with silicon gasket for IP-65 protection, power consumption <20 W (35W) & luminaire lumen >2500 lm and system efficiency > 120 lm/W, in built electronic driver prewired upto terminal block with driver efficiency >85% power factor >0.95 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 35/40 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and two coats aluminum paint including nuts, bolts and washers, complete all as specified and directed. 40 S & F MCB DB vertical type 4-way VTPN sheet metal enclosures 415 V with 200 Amp fully insulatedstandard copper Bushbar for each phase & sourrounded with neutral Bars & two common neutral bar, two earth bar incl cable ties fo cable management suitable for housing MCCB/TPN 415 V as incommer IP-54 protection with metal doors all enclosed on standard steel sheet flush mounted type double door factory fabricated complete without MCB & MCCB but with enclosure blank plate, complete all as specified and directed. 41 Supply and fixing MCB DB single pole pole with neutral sheet metal enclosure double door type, 240 volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standardsteel sheet flush mounting type factory fabricated powder coated complete without MCB and with enclosure blank plates for unused way suitable for 12- way ISI marked, complete all as specified and directed. 42 Supply and fixing MCB DB single pole pole with neutral sheet metal enclosure double door type, 240 volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standardsteel sheet flush mounting type factory fabricated powder coated complete withoutMCB and with enclosure blank plates for unused way suitable for 8- way ISI marked, complete all as specified and directed. 43 S&F MCB SPN 32 Amps B series, 10 KA-240 Volts, AC ISI marked, complete all as specified and directed. 44 S&F MCB single pole 6 to 32 Amp rating C Series,10 KA240 Volts, AC50 Hz , ISI marked, complete all as specified and directed. 45 S&F MCCB 415 Volts AC, with 100 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCCBand with enclosure blank plates for unused way suitable for 4 way, complete all as specified and directed. 46 M&L for submain wiring with two single core 4 sqmm copper conductor FRLSH, PVC insulated, multistranded, unsheathed cable ISI marked drawn in PVC conduit not less than 25 mm dia medium grade ISI marked concealed in wallsurface / ceiling for sub main connection including 6 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connection to earth dolly, complete all as specified and directed.Note:- Two single core 6 sqmm copper conductor for phase / neutral, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit. 47 M&L Earthing complete with galvanised mild steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using GI earth wire 4 mm dia as earth electrode connected to bolts, nuts, check nuts and washers of GI or steel etc at one end and connected to equipment at another end.GI earth wire encased in and including 15 mm dia GI light grade pipe from upper end of earth plate upto equipment 20 dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, test point, GI funnel with wire mesh fixed on water pipe PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pit chamber and RCC pit cover slab of 50 mm thick precast RCC (1:1.5:3) type A-1 duly reinforced with MS TMT bars 8 mm dia @ 150 mm c/c both ways with 10 mm dia MS round baras in lifting handles, excavation earth work including laying the GI pipe concealed in floor/wall all as described in electric plate no 3 of SSR part I complete all as specified and directed and testing on completion. Note:- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.(ii) Earthing wire beyond 7.5m shall be measured and paid separately. 48 B&R WorkM & L One closed side panel of ACP Sheet with framed Mild steel structure at one side of shed with the raised platform arrangement of size12m x 6m of brick work and Tile/marble flooring for Yoga / PT Shed, complete all as specified and directed. 49 M & L for Design, fabrication ,supply & erection of pre-engineered steel building incl civil works inside shed for One store Room of dimension 5 m x 5 m, complete all as specified and directed. 50 Material and Labour for 08 nos Rope Gallows made up of framed mild steel structure fixed to walls/floors with sliding arrangement which can be slided to one side when not in use with 5 ropes to be hung from each rope gallows including painting with primer, complete all as specified and directed. 51 Material and Labour for 04 nos beam bars made up of framed mild steel structure fixed to walls/ floors to be placed at one side of edge including painting with primer, complete all as specified and directed. 52 Material and Labour for 20 nos chin up bars made up of framed mild steel structure fixed to walls/ floors at 2.4m height fixed at one side of edge of shed including painting with primer, complete all as specified and directed. 53 Supply and fixing MS grill bars all around the shed, complete all as specified and directed. 54 EXTERNAL ELECTRIC SUPPLYSupply,installation and testing of factory made,CPRI Approved cubical outdoor (Kiosk) type feeder pillar box 415 volt, 4 wire, AC 50 Hz, made out of 3.15 mm thick CRCA sheet ,weatherand vermin proof powder coating finish bothside(interior & exterior) for outdoor mounting withhaving degree of protection as per IP-56 complete factory lock two earth terminal suitable cable gland for all incoming and outgoing and removable neutral link,Both Side openable double door Indicating light LED type RYB - 01 Set,Ammeter-01, Voltmeter-01, connecting strip/solid conductor brought out to cable chamber brass/copper nut, bolts/washer etc including grouting of feeder pillar box 60 cm above ground level including suitable size angle iron stand made up of65 x 65 x 6 mm welded on all the four corner embedded in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) upto 30 cm includingexcavation and earth work complete with following asseccories:-(a) copper insulatd busbar high conductivity 400 Amp rated 4 phase including neutral bus bar complete - 01 No.Incoming :-(b) MCCB4 -pole 160 Amp make-L & T,415 Volt,breaking capacity 36 KA,50 HZ with thermal magnetic release - 01 No.Outgoing :-(c)MCCB 4 - pole 125 Ampsbreaking capacity 25 KA, 50 HZ- 02 Nos. (d)MCCB 4 - pole 63 Ampsbreaking capacity 25 KA, 50 HZ- 01 No. 55 M&L for bus bar box of sheet metal 3 mm thick powder coated, having 4 Nos. aluminium bus bar of rating 200 Amp mounted on insulator including 01 No. of MCCB 4 pole 63 Amp 415 volts with thermal magnetic release as incomer, breaking capacity 25 KA inside the box and suitable fixing arrengement like flat iron clamp of size 25x3mm with hinged cover & locking arrangementincluding grouting of feeder piller box 60 cm above ground level by providing 90 cm long angle iron of size 40 X 40 X 6 mm welded on all the four corner embedded in PCC 1:2:4 using 20 mm graded stone aggregate complete duly painted with two coat of synthetic enameled paint over a coat of red oxide primer fixed in repair outdoor type duly fitted oncomplete all as directed by Engineer-in-charge. 56 Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable end termination heat shrink type joint complete with jointing material & accessories suitable for 3.5 core XLPEcable of size 16 sqmmto 35 sqmminsulated armoured aluminium cable complete all as specified and directed. 57 Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable end termination heat shrink type joint complete with jointing material & accessories suitable for 3.5 core XLPEcable of size 50 sqmmto 95 sqmminsulated armoured aluminium cable complete all as specified and directed. 58 Supplying ,laying, commissioning & testing 70 Sq.mm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 59 Supplying ,laying, commissioning & testing 50 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including takingout old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 60 Supplying ,laying, commissioning & testing 35 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cable,complete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 61 Supplying ,laying, commissioning & testing 25 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 62 Excavation in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth;for laying of cable, foundation, etc, or for shafts, wells, cesspits, manholes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil,complete all as specified & directed. 63 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm,complete all as specified & directed. 64 Removing excavated material n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point,complete all as specified & directed. 65 M&L sand filling under floors or in foundations including watering and consolidation,complete all as specified & directed.Note :- Punned thickness shall be measured and paid. 66 Supplying & laying reinforced precast concrete cable cover, class EHV, type 1 with peak, size 450mm x 230mm x 50mm (Note: cable cover shall be laid perpendicular to the axis of cable). 67 M&L for earthing complete with galvanised steel earth plate 600 x 600 x 6.3mm burried directly in ground (Earth pit not less than 2.25 m deep) with top edge of the plate not less than 1.5 m below ground level connected to GI strip of size 32 x 6 mm by means of nuts, bolts & washers,earth wire protected by GI pipe 50 mm dia ‘light grade’ ISI marked including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate),40 mm thick precast RCC cover in 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe ‘light grade’ ISI marked, 20 mm bore all as shown in Electrical plate No. 03 of MES Schedule Part-1 (2009) complete. 68 M&L GI pipes/tubes 80 mm bore,light gradeincluding necessary GI Fitting i.e. GI bends with socket ,reducer socket laid in trenches fixed on pole fixed on walls UG Road/floor for cable protection complete,complete all as specified & directed. . 69 M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 25x4mm galvanised iron strip,complete all as specified & directed. 70 Chain Link FencingExcavation in post holes (or similar holes) in soft/ loose soil each n exc 0.5 Cum filling in and ramming earth or broken rubble mixed with earth around, complete all speecified and as directed. 71 PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foudation for fencing post filling, and mass concrete, complete all as specified and directed. 72 Supply and Fixing Mild steel work Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. 73 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire. 74 Supply chain link MS fencing galvanised mild steel wires 4mm diameter mesh size not less than 75mm x 75mm etc complete all as as specified and directed.
Contract Date: May 20, 2026 Contract Value : ₹ 5.24 Crore
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttar Pradesh View Result →
22.
Housing Urban and Rular Development #11116081 AOC
Tender for Construction Of New School Building For Up Gradation Of Secondary To Higher Secondary School Under Samagra Shiksha, Assam At Uzirar Char High School, Barpeta District (For Supply Of Furniture Only) , Additional Classroom: Desk Cum Bench: Overall Dimension 1800 X 850-900 X 740-750. Desk 1000 X 378 X 750 Mm. Bench 1800 X 335 X 437Mm. The Height/Depth Of The Backrest Should Be 265 Mm. The Desk, Seal & Backrest Should Be Made Of 18 Mm Thick Pre Laminated Mdf Board Isi Marked With Laminate Pasted On Top And Edges With Machine Pressed Pvc Edge Bading Sealed With Hot Melt Eva Glue. The Understructure Should Be Made Of 25.4 X 25.4 X 1.2 Mm Thick 60-70 Micron Epoxy Powder Coated Ms Tubes. Storage Shelf Should Be Made Of 0.6 Mm Thick Powder Coated Affixed Below The Desktop. The Front Side Covered With Modesty Panel Mode Of 1Mm Thick Crca Ms Steel Of Size 1800 X 150 (H) Mm & Edges Sealed With Pvc Bands With Provision Of Two Metal Hooks For Hanging School Bags Fixed At Ends. , Teachers Table: Table Dimension 900X 600 X 740-750Mm With One Drawer. The Table Top Made Of 19Mm Mdf Board Isi Mark With 1Mm Laminate Pasted On Top With Edge Rounded And Machine Pressed & Sealed With 2Mm Pvc Band Sealed With Hot Melt Eva Glue. The Under Structure/Frame Will Be Of Tubular Frame Of Square Tubes Size 25.4 X 25.4 X 1.2Mm Thick Powder Coated With 60-70 Micron. The Shell Of Drawer Is To Be Made Of 0.5Mm Thick Crca Ms With Metal Lock. , Teachers Chair: Chair With Arm Made Of Natural And Biodegradable Material With Seal & Back Made Of Polyurethane Foam Covered With Fabric. The Dimension Of The Chair Shall Not Be Less Than The Following: 1.Overall Height: 850Mm 2.Seating Height:455Mm 3.Width:540Mm.Deoth:500Mm , Science Laboratory: Lab Stool: Stool Made Of Circular Metal Top 1.6-1.8 Mm Thick Cr Steel, 300 Mm Dia Welded To The Under Structure Made Of 4 Ms Tubes Of 22Mm Dia, 1.2Mm Thick Powder Coated Tube. The Seat Will Be Cushioned With Foam Covered With Fabric. Height :460-470Mm. , Teachers Table: Table Dimension 900X 600 X 740-750Mm With One Drawer. The Table Top Made Of 19Mm Mdf Board Isi Mark With 1Mm Laminate Pasted On Top With Edge Rounded And Machine Pressed & Sealed With 2Mm Pvc Band Sealed With Hot Melt Eva Glue. The Under Structure/Frame Will Be Of Tubular Frame Of Square Tubes Size 25.4 X 25.4 X 1.2Mm Thick Powder Coated With 60-70 Micron. The Shell Of Drawer Is To Be Made Of 0.5Mm Thick Crca Ms With Metal Lock. , Teachers Chair: Chair With Arm Made Of Natural And Biodegadable Material With Seat & Back Made Of Polyurethane Foam Covered With Fabric. The Dimension Of The Chair Shall Not Be Less Than The Following: 1. Overall Height : 850Mm 2. Seating Height : 455Mm 3. Width : 540Mm, Death : 500Mm , Computer Room: Standard Computer Chair With Fixed Arms, Revolving With Pedestal Made Of Injection Moulded Nylon Base Of 600Mm Dia Fitted With 5 Twin Wheel Castors And Backrest Made Of Injection Moulded Black Polyproypylene Of Medium Height With Nylon Mesh And The Seat Made From Standard Foam Cover. The Seat Will Have Conventional Pneumatic With One Lever Control For Locking And Height Adjustment Between 400-600 Mm For Static Load Of Not Less Than 100 Kg. , Teachers Table: Table Dimension 900X600x 740-750 Mm With One Drawer. The Table Top Made Of 19Mm Mdf Board Isi Mark With 1Mm Laminate Pasted On Top With Edge Rounded And Machine Pressed & Sealed With 2Mm Pvc Band Sealed With Hot Melt Eva Glue. The Under Structure/ Frame Will Be Of Tubular Frame Of Square Tubes Size 25.4 X 2 5.4 X 1.2 Mm Thick Powder Coated With 60-70 Micron. The Shell Of Drawer Is To Be Made Of 0.5 Mm Thick Crca Ms With Metal Lock. , Teachers Chair: Chair With Arm Made Of Natural And Biodegadable Material With Seat & Back Made Of Polyurethane Foam Covered With Fabric. The Dimension Of The Chair Shall Not Be Less Than The Following: 1. Overall Height : 850Mm 2. Seating Height : 455Mm 3. Width : 540Mm, Death : 500Mm , Library Room: Reading Table: Dimension: 1800 X 900 X 740-750. The Table Top Made Of 25 Mm Thick Pre Laminated Mdf Boards Isi Marked With Laminate Pasted On Top With Edges And Machine Pressed 2Mm Pvc Edge Banding Sealed With Hot Meld Eva Glue.The Understructure Should Be Made Of 1.6Mm Thick Ms Frame Supportinh The Top.The Legs Should Be Made Of Ms Erw Tube Of Dia 38.1Mm & 1.6Mm Thick. , Reading Chair: Dimension: 450 X 500 X 800 Mm (Approx.). Multipurpose Chair Of Engineered & Contoured Pvc Seat & Back Rest Fixed On Understructure Of Ms Pipes Of Dia 19Mm Duly Powder Coated With 60-70 Micron Epoxy. Width Of Seat & Back Rest 400-500 Mm With Suitable Heigth For Seating. , Teachers Table: Table Dimension 900X 600 X 740-750Mm With One Drawer. The Table Top Made Of 19Mm Mdf Board Isi Mark With 1Mm Laminate Pasted On Top With Edge Rounded And Machine Pressed & Sealed With 2Mm Pvc Band Sealed With Hot Melt Eva Glue. The Under Structure/Frame Will Be Of Tubular Frame Of Square Tubes Size 25.4 X 25.4 X 1.2Mm Thick Powder Coated With 60-70 Micron. The Shell Of Drawer Is To Be Made Of 0.5Mm Thick Crca Ms With Metal Lock. , Teachers Chair: Chair With Arm Made Of Natural And Biodegadable Material With Seat & Back Made Of Polyurethane Foam Covered With Fabric. The Dimension Of The Chair Shall Not Be Less Than The Following: 1. Overall Height : 850Mm 2. Seating Height : 455Mm 3. Width : 540Mm, Death : 500Mm , Storage For Books For Library: The Size Of The Product Is 914Mm W X 320Mm D X 1742Mm H. The Top Panel, Back Panel And Side Panel Are Made Of 0.7Mm High Yield Strength Crca Rest In 0.8Mm Crca. Each Door Has 6 Lever Camm Lock With Common Key And 3Mm Thick Transparemt Glass For Clear Inside Vision Secured In A Metal Frame Through Rudder Gasket The Finish Of The Product Is Epoxy Polyester Powder Coated To The Thickness Off 50 Microns. , Almirah Of Dimension 1981H X 916W X 486D With 4 Nos Of Adjustable Shelves Made Of Crca Steel With 3 Way Locking Mechanism With Shooting Bolt Arrangement Storwel Plain Comes With 4 Plain Adjustable Shelf Of Thickness =0.8 Mm. Net Weight (W/O Carton) = 73.5Kg. 2) Top, Bottom, Lh & Rh Side And Back Material Thickness =0.9 Mm Removable Rh & Lh Main Door With Stiffeners Material Thickness =0.9Mm.
Contract Date: May 26, 2026 Contract Value : ₹ 31.09 Lakh
Government Departments No of Bidders 3
Assam View Result →
23.
Public Administrative Department #11109202 AOC
Tender For Yearly Civil Maintenance Work At Various Comm Complex And Etc For Pmpml-2 Excavation for foundation in earth, soil of all types, sand, gravel Cu.M and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m.) By Manual Means 3 Excavation for foundation in hard murum and boulders (Lift upto 1.5m.) Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) 4 Excavation for foundation in Soft rock and old cement or lime Cu.M masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means 5 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete 6 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to. 7 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.. 8 (Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats )Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete 9 ( Providing and fixing mild steel grill gate ) Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 kg. to 20 kg. Per Sq.m.) Spec.No.: As directed by Engineer- in-charge. 10 ( PCC M20 for for bed blocks ) Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand 11 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks,laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structuralsteel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 12 ( Providing second class Burnt Brick masonry in plinth ) Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete. 13 ( Providing second class Burnt Brick masonry in superstructure ) Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 14 ( Providing second class Burnt Brick masonry half brick thick wall )Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 15 ( Providing fly ash brick masonry in foundation and plinth ) Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. 16 ( Providing fly ash brick masonry in superstructure ) Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 17 Damp proof course 50 mm thick in M20 cement concrete : Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete 18 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. 19 Providing waterproof plaster in W.C. and bath 12 mm thick for dado : Providing waterproof plaster in W.C. and bath 12 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) 20 Providing and applying water proofing treatment using acrylic polymer : Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on StampPapers etc. complete. 21 internal cement plaster 20mm thick : Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. 22 Rough cast cement plaster externally in two coats : Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. 23 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. 24 Polished Tandur Stone flooring 25mm to 30mm thick in plain/ diamond pattern: Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. 25 polished Kadappa stone 25mm to 30mm thick ( sill ) , : Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning 26 ceramic tiles of having size 30 cm x 30 cm : Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. 27 ceramic tiles of having size 30 cm. x 30 cm. : Providing and laying ceramic tiles of having size 30 cm. x 30 cm.and confirming to corresponding I.S. for dado and skirting inrequired position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 28 vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness a) Flooring : Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Flooring 29 Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. 30 two coats of flat oil paint of approved colour to the old structural steel work : Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. 31 Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 32 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. (on already painted surface) 33 two coats of exterior weather shield paint : Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending 34 White-wash in two coats on old / new plastered : Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. 35 Plastic emulsion paint to old surfaces in three coat : Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding,preparing the surface. (excluding primer coat). 36 Providing and applying water bound distemper along with primer coats. Recommended companies: Asian, neroleck, Dulex 37 Corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) : Providing and fixing corrugated galvanised iron sheets of 0.63mmthick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). 38 6.00 mm thick ISI mark Asbestos Cement Corrugated sheet roofing : Providing and fixing 6.00 mm thick ISI mark Asbestos Cement Corrugated sheet roofing including galvanisediron J or L hook bolts galvanised iron band bituminous G.I. washers, galvanised iron clamps, bolts, nuts and scaffolding etc. 39 valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide : Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). 40 Removing G.I. or A.C. sheet roofing : Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. 41 colour coated Zincalume profiled sheets for roofing : Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective 42 Solid core flush door shutter commercial in single leaf 32 mm : Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. 43 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S.62481979) (Without mechanical gear) 44 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). 45 Alluminium sliding windows two tracks d) with powder coating without box : Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box 46 Acrylic plastic sheet panels to doors/windows (a) 2.00 mm thick : Providing and fixing acrylic plastic sheet panels of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doors/windows including providing and fixing clips, putty etc. complete. (a) 2.00 mm thick. 47 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. 48 Partition of CCTW frame and commercial ply : Providing and fixing partitions made up of CCTW frame of size 75 mm x 50 mm at 60 cm c/c with 9 mm thick commercial ply and 4mm thick veneer on both sides with French polish etc. complete. 49 Aluminium partition partly glazed and partly laminated : Providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990,laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. 50 push cock (Self closing tap) symet type of 15 mm dia. : Providing and fixing push cock (Self closing tap) symet type of 15 mm dia. including necessary socket, testing etc. complete 51 White Glazed Earthenware full stall type Urinal with P.V.C. flushing : Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall 52 white glazed earthenware Wash Hand Basin of 55cm. x 40 cm.size : Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 53 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. 54 15cm x 10cm salt glazed stoneware gully trap : Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. 55 concrete pipes of I.S.NP. class of 300mm diameter : Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. 56 Brick Masonry Inspection Chamber 90cm x 45cm x 90cm : Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. 57 Orissa type white glazed earthenware 575 mm water closet pan : Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. 58 H.D.P container Syntex or alike one piece moulded water tank : Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 59 H.D.P container Syntex or alike one piece moulded water tank : Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. 60 P.V.C. Rain water pipes of 110mm outer diameter : Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes,inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) 61 Providing and laying in walls/ceilings/floors 15 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.25 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 62 Providing and laying in walls/ceilings/floors 25 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 2.49 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 63 Providing and laying in walls/ ceilings/floors 40 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 3.68 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 64 Providing and laying in walls/ceilings/floors 50 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 5.17 kg/metre necessary fitting remaking good the demolished portionwith filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 65 Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. 66 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 67 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete 68 Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts etc, complete. 69 Providing 1.5 mm thick pvc carpet of approved design n color &fixing at site as per site in charge instructions etc. completed. Note:- Dimensions would be considered as per actual carpet size fixed at site. 70 Transportation of material obtained from xcavation including soil, Cu.M rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes,channels etc. Obtained from dismantling, loading in a truck of minm.5 Cum.capacity or designed capacity and transporting within the municipal limits or anydesignatedplaceof corporation,unloading, stacking or spreading of material etc. complete.
Contract Date: May 18, 2026 Contract Value : ₹ 37.27 Lakh
Local Bodies No of Bidders 3
Maharashtra View Result →
24.
Defence #11097521 AOC
Tender For Provision Of One Mega Watt Solar Power Project Under Ge (I) (P) No 2.; 1 Supply and fixing of MS fabricated office container of size 15x8x8.5 feet with toilet cabin of size 5x4 feet for SCADA panel and local monitoring for accomodating portable shelter , office, or living space in high alttitude cold region with including PCC flooring work for installation of container including fixing arrangement completeall as specified and directed.Location conditionTemparature range -30 °C to +25°CAltitude -3500m above sea levelwind speed upto 120 km/hSnow load high (snow accumulation on roof)Readymade container shall include the following(a) Attached toilet with EWC/IWC pressure jet gun, water tap, exhaust fan, corner wash basin, tiles flooring, water tank stand , gyser provision, wall mixer and other accessories required for said locations conditions. 2 (b) Container shall include bottom frame 100mmx50mm C channel ISI marked, Top frame of size 50mmx50mm MS square pipe ISI marked , stiffener bottom 100mm x50mm, 50mmx25mm, 25mmx25mm MS square pipeISI marked stiffener top 50mmx25mm, 25mmx25m MS square pipe ISI marked, side post 50mmx50mm, 50mmx25mm MS square pipe ISI marked, Side wall stiffness specially formed CR sheets of thicknes 1.2mm internal wall panelling 8mm thick MDF and all vertically and horizontal corner will be nealty and smoothly finished with aluminium section and L angle, Roof outside 1.2mm thick sheet of make properly sloped and water tight, false ceiling 9mm thick and smoothly finished with aluminium section and L angle, flooring 18mm thick cemented board of make visaka industries will be fixed by means of self taping screw and 1.5mm thick PVC vinyl carpet will be fixed on the panel (100% water termite and dimensional proof with veyl carpet) Aluminium windows double shutter sliding aluminium powder coated windows of thickness of 1.2mm with 4mm thick glass of make saint Gobin for all windows safety grill from outside and canopy above the floor frame work by tubular pipe of 25x25, Door with lock and handles with hydraulic door closer. Insulation 25mm thick glass wool insulation of density 65kg/m3 on side wall and 50mm on ceiling , all wiring will be PVC insulated copper wires of ISI quality, suitable for 240 volts 50 bukhead, switches and socket of 6Amp of ISI make. Split air conditioner point 16Amp alongwith seperate MCB earthing point will be provided for safety. Outside painting with 1 coat of Epoxy primer with 2 coats of epoxy paint and specially formed hooks for easy lifting and shifting. 3 Material and Labour for Plain fillets 2nd class softwood . square, rectangular or triangular in section, clean sawn, secured with screws of size exc 13 and not exc 25 Sqcm complete all as specified and directed. 4 Material and Labour for for prepration of wooden surfaces and applying a coat of pink primer for filletsof surface of any description not otherwise described over 10cm in width or girth complete all as specified and directed. 5 Material and Labour for50mm thick bonded mineral wool blanket slab made from rock, density 48kg/Cum and fixed as per manufactures instruction complete all as specified and directed. 6 Material and Labour for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with nails on walls complete all as specified and directed. 7 Material and Labour for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with nails on ceiling complete all as specified and directed. 8 Material and Labour for cement concrete type D2 1:4:8 (40mm graded agg)as in foundations filling mass concrete and all as specified and directed. 9 Material and Labour for Pre-cast cement concrete block masonry with solid blocks in 1:3:6 type C-1 using20mm graded crushed stone aggregates, exc. 10 cm in width or girthand setting in mortar 1:6, complete all as specified and directed. 10 Material and Labour for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in flooring finished even and smooth without using extra cement complete all as specified and directed. 11 Material and Labour for renderring 15mm thick in CM 1:4 on fair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 12 Material and Labour for renderring 15mm thick in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed. 13 Material and Labour for Walling of random rubble masonry, uncoursed well bonded bedded and solidly hearted built in CM 1:4 and flush pointing the surface in contact with earth in same mortar as the work proceeds complete all as specified and directed. 14 Supply and fixing of50mm thick PUF insulated water tank of capacity 5000 litres complete all as specified and directed. 15 Supply and fixing of50mm thick PUF insulated water tank of capacity 1000 litres complete all as specified and directed. 16 Supply, installation, errecting ,testing and commissioning of On grid connecting on ground Mono Perc half Cut Bifacial Solar photo voltaic (SPV) generation plant of capacity 825KWp DC capacity at standard test condition and750 KW AC capacity (Net capcity after derating), at CHUMATHANG for fixed on module mounting structure without tracking component including solar grade copper cable of suitable sizes upto Invertor,UPS for auxilliary supply to SCADA, string array combiner/ array junction boxes comprising of following sub components/sub systems including all necessary protection, control switches and relays as required for smooth functioning of the system and meeting the specifications as given and directed by Engineer-In-Charge, the quoted rates includes all components/accessories as given below and required from Solar panel to upto step up transformer 1000 KVA incomer termination complete all as specified and directed. 17 (A) Solar photo voltaic plant- : To obtain cumulative 825KWp, three tables of nearly equal size table (varaiation of 5% between table size is permissible) ofthe input of mono perc Half Cut Bifacial silicon solar PV modules of minimum or more than 540/545 Wp with minimum or more than 144 Nos solar cells preferably per module of standard size and weight as per NISE standard , frame anodised aluminium frame (double walled) with junction box IP 65 rated , each having efficiency more than 21% at standard test condition, fill factor more than 0.79 performance ratio equal to and greater than 78 % & made of high transmittivity glass as per NISE standard tempered and glass front surface shall give high encapsulation gain. (transmittance above 90% and bending less than 0.3%) Electrical parameters of 540/545 Wp solar PV module under STC of irradiance 1000 W/m2 , AM 1.5 Spectrum at temperature 25° C will be as under or higher :-Min Peak power Pmax : 540/545 Wp or higher, Current at Pmax Ipm : 12.97A Voltage at Pmax Vpm : 41.65 Volt Short circuit current Isc : 13.85 A Open circuit voltage Voc : 49.50Volts , Maximum series fuse rating : 30A (i) Rated output of modules shall have positive tolerance of minimum 3% & no negative tolerance is allowed. (ii) It shall perform satisfactorily in relative humidity 100% with temperature -35° C to +35° C (Cell) and should withstand wind 198 Km/Hr on the surface of the panel. (iii) PV modules must be warranted for their output peak watt capacity, which shall not be less than 90% of the initial value at the end of 10 years and 80% of the initial value at the end of 25 years. (iv) The temperature co-efficient for the module shall be suitable for CHUMATHANG (UT Of Ladakh) climatic conditions. Variation of higher capacity Solar PV panel is permissible subjected to that performance parameter of the panel shall be equal or better than given above.v) PV module must confirm to latest edition of IEC 61215/IS14286 and as specified here-in- after in particular specification In addition, the modules must confirm to IEC 61730 Part-I & II for construction and testing & safety qualification. (vi) It shall also in conformity of latest technical specifications issued by MNRE from time to time (vii) Provision of earthing & earth strip/cables etc. for earth for solar PV module/Array etc. as per latest IS/MNRE norms to be provided and the cost of the same is to be included in this item and no extra amount will be paid to the contractor on this account.Notes: On SPV (i) The specifications and capacities of plant equipments shall be designed to confirm and achieve the minimum of efficiency and performance guarantees as laid down in this bid documents. These design details and other technical details shall be submitted by contractor on commencement of contract as early as possible but not later than one month(ii) The installed system should be such that during the day, the power needs should be first met by Solar energy. In case the solar energy production is less than the required, the deficit power should be pulled from the exsiting DG set supply .(iii)The contractor shall obtain the approval of make for the proposed SPV module from accepting officer complete system of 825 KWp Solar photo voltaic (SPV) (iv) Any necessary item required for functioning of SPV but not catered in the contract will be deemed to be included in the quoted rate and nothing extra will be admissible on this account 18 .(v) Site clearance incl removal of boulders to a distance 250 m to 500m to be carried out before execution of work. Amount required for site clearance is deemed to be inclulded in the amount quoted by Contractor against this item. Contractor is advised to visit the site before quoting the rate. (vi) Country of origin for solar cell & PV module must confirm to ALMM APPROVED LIST OF MNRE.(B) String array combiner/Junction Boxes: Supply & fix suitable Numbers of dust, vermin and waterproof Array string array combiner/Junction Boxes and main junction boxes made of FRP/Thermo Plast with IP65 protection in compliance with IEC62208 and shall be sunlight /UV resistant a well of fire retardant including over voltage protection, surge protection and maintenance free earthing as per relavant standard. The string array combiner/Junction boxes shall have suitable arrangement of followings:(i) Strings are required to be connected to the busbar through individual fuses. Provide arrangement fordisconnection for each of the groups (ii) Provide a test point for each subgroup for quick faultlocation & to provide group array isolation. (iii) Each array junction box will have suitable by pass &reverse blocking diodes for maximum DC blocking voltage of 1500V with suitable arrangement for its connection. Reverse blocking & by-pass diodes shall work for temperative extreames & shall have efficiency of 99.98% conformed by appropriate IEC standard. Note:- String array combiner/ junction box shall be carried out as per approved SLD.(C) Cabling : (i) Supply and fixing suitable size of XLPO insulated copper cable as per load of solar grade, 1800 V DC/1100 V AC or higher DC voltage rating, confirming to TUV 2 pfg 1169/08.2007 PV1F and latest IEC codes & IS codes for Solar Cables. (ii) All cables and connectors for use of installations shall be of solar grade which can withstand harsh environment conditions including high temperature, UV radians, rain. humidity, dirt, burial and attack by moss and microbes for 25 years and voltage as per latest IEC/IS in standards. (iii) All cables/wires shall be provided with UV resistance printed copper ferrules for DC side. (iv) Size of cable from PV module to invertor shall be minimum 6 sqmm 1 core multistranded copper UV protected solar cable to be provided. (v) Cable Batch No./Drum No., IS code & size make should be printed/embossed at every one metre. (vi) The wiring of modules interconnection shall be in suitable size GI/HD pipe. (vii) Size of wire - 3.70mm dia with tolerance limit (+/ -) 0.08mm. (viii) Size of aperture - 80mm x 100mm (ix) Woven double twisted, hexagonal shaped Zn + PVC coated wire mesh type 80 x 100mm of wire 3.70mm dia wire as per IS 16014. The wire used for the manufacture of wire mesh shall have minimum tensile strength of 350N/mm2 and elongation shall not be less than 10% in accordance with IS 16014.To be laid in DWC pipe of suitable size. (xi) Solar inverter to ACB Panel, connection aluminium XLPE conductor cable of size 185 sqmm x 3C 1.9/3.3 KV rating Note : Cost of interconnecting copper cable (AC & DC), Al XLPE cable from Solar Invertor to ACB panel and cable tray above upto inverter and LT panels and upto LT side of transformer as per site requirement at the location as directed deemed to include in the item quotated rates and no extra payment will be made to contractor on this account. LT Panel shall be paid seperately. 19 (D) Module Mounting Structure (MMS) : Supply, design & fixing support structure MS hot dipped galvanised (80Micrones) including PCC 1:2:4 type B-1 for each support / foundation for civil works (excavation and earth work cutting, grouting, PCC etc.) and fixing the mouting arrangement suitable for PV solar modules & to withstand minimum horizontal wind speed of 198km/hr. The mounting structure is of mild steel hot dipped galvanised. The array structure shall be so designed that it will occupy minimum space without sacrificing the output from Solar PV panels. Nut bolts, supporting structures including module mounting structures shall have to be adequately protected from atmosphere and weather prevailing in the area. All fastners shall be of stainless steel of grade SS316. Two numbers of anti-theft fasteners of stainless steel on two diagonally opposite corner of each module shall be provided.Note: (i) Cost of interconnecting copper cables along with cable trays ( floor/ wall mounted ) suitable to accommodate solar grade cables & cables upto inverter is included in the item and no extra payment will be made to contractor. (ii) The module mounting structure shall be carried out as per approved drawing of foundation MMS. MMS foundation shall be designed as per IS 456:2000 and IS 13920:2016 and drawings shall be approved by GE before execution. (iii) The MMS stub/column,rafter,purlin ,ties and bracing members shall conform to following indian standard :IS 2062 -Hot rolled medium and high tensile structural steel ,IS 811-Cold formed light gauged structural steel section ,IS 1161-steel tube for structural purposes, IS4923- Hollow steel section for structural use. Minimum grade of steel sections for conforming to IS 811 and IS 4923 shall be E350 conforming to IS 2062 and Yst 310 conforming to IS 1608 respectively.(E) Lightning Protection for PV Array :- Supply & fix Lightning Arrestor of the required number of suitable Early Streamer Emission (ESE) lightning arrestors installed in the array field. Lightning arrestors/surge arrestors shall conform to IEC 60099-4 or IS:3070 except to the extent modified in the specifications. Arrestors shall be of hermetically sealed units, self-supporting construction, suitable for mounting on lattice type support with the following :-(i) The air terminal should be capable of racking the lightning stroke 60 micro seconds earlier as compare to passive lightning rod. (ii) The air terminal is Early Streamer Emission (E.S.E.) type which shall be fixed at the top of a GI elevation pole with base so as be at least 2 meters above the structure to be protected. Its height above roof level would be dependent on the level of protection and the protection radii required (iii) The air terminal should be working on the principle of early streamer emission using non-radioactve technology, needing no external power source. (iv) The air terminal is of stainless steel and it has qualified diameter to resist high values of lightning currents. (v) Roof connecting pipe should be capable of withstand in lightning strikes having dimension 50mm ID and 60mm OD. The terminal adaptor having inner dia 60mm OD. Lightening protection shall be provided as per approved Drg. 20 (F) Earthing system for PV array field :-Earthing system shall comply with latest revision andamendment of the relevent IEC standard and IS codes. (i) All PV module ,module mounting structure (MMS) and string monitoring unit (SMU) structures in the PV erray field shall be connected to the earthing system (ii) Each PV module frame shall be earth using copper wire of sufficient cross section area. Earthing complete with copper earth plate electrode 600×600 ×3.15 mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level connected to 20x3 mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and 40mm dia GI pipe light grade for protection of earth strip and 20mm dia meduim grade for water funnel with wire mesh complete connected to earthing test point as per SSR Part-I 2009 all as specified and directed including testing on completion.NOTE:- Cost of all Copper plates earthing equipments including Copper earth strips from equipments to earth pit is deemed to be included in quoted rates.(G) Solar Inverter : Supply, fixing, testing and commissioning of minimum of suitable capacity in suitable Nos as per 250/255 KW (Total capacity of Inverters shall not be less than 750/755 KW after derating with three inverter) for CHUMTHANG 50 Hz , 3 phase 800V,185A Grid Connected Solar inverter outdoor type suitable to convert DC power of solar PV module/array to AC for further feeding to stepup transformer conforming to IEC-61683 for efficiency, IEC-62109(1&2) or equivalent for safety & IEC-62093 for reliability. The input D.C. tech specification of inverter are as under and as per approved design.(i) Operating temperature :-40ºC to + 35ºC,(ii) Relative humidity (Non condensing) upto 95%.(iii) The inverter shall consist of associated control, protection, data loging device and remote monitoring hardware. the inverter shall be suitable for operation at Chumathang .Alt 4200 mtr and min - 40ºC temperature.(iv)The inverters shall have minimum protection to IP65 and minimum European efficiency 99% load as per IEC 61683 standard.(v) The inverter shall adjust voltage and frequency levels to suit the existing DG Sets/AC power supply. (vi) The inverter shall be self-commulated with pulse width modulation (PWM) technology and shall be capable of synchronize maximum within 1 minute.vii) Maximum power point tracker (MPPT) conforming IEC- 62093 shall be integrated in the inverter to maximize energy drawn from the solar PV array. (viii) The inverter shall include appropriate self protection & self diagnostic feature to protect itself and the PV array from the damage in the event of inverter component failure or from parameters beyond the inverters safe operating due to internal or external causes. 21 (ix) Inverter shall have protective arrangement against ground leakage faults, over voltage & over current. (x) Inverter shall have arrangement for adjusting DC input current & shall trip against sustainable fault down stream and shall not restart till fault is rectified. Notes: (i) If the solar inverter as specified here-in-before is not available in the market , contractor will provide the same of higher capacity as available in the market without any extra cost. (ii) All suitable size of copper cables as per load requirement from SPV systemto inverter for interconnection purpose shall be provided by the contractor and deemed to be included in quoted rates. (iii) Cost of all Copper plates earthing equipments including Copper earth strips from equipments to earth pit is deemed to be included in quoted rates.(H) Uninterrupted power supply(UPS) : Supply, installation, testing & commissioningof 110V/40A Float Cum Boost Battery Charger unit includingbattery bank comprising 50 Nos of 2 Volts-65 AH sealed maintenance free battery.The CCCV battery charger consisting ofcopper wound,air cooled transformer, 01 Set single phase full wave bridge rectifier consisting ofdiodes andSCRs, liberally rated mounted on heat sink andcomplete with resistor/condenser network for surge supperssion .During auto float mode automatic changeover shall take place from float mode to boost mode and vice versa, 01 Set of solid state constant potential controller to stabilize the DC output voltage of the float cum boost charger, 01 No electronic controller , DCdigital ammeter,DC digitalvoltmeter, Potentiometer , DC, MCB for reverse battery protection . The charger should have alarm annunciation with visual and audible alarm with manual reset facility forfuse fail alarm. Float cum boost battery charger and DC distribution board shall be housed in powder coated sheet steel cubicle with panels of 1.6mm thickness , louvers for ventilation , gland plate will be provided for cable entry from bottom .The battery charger shall be divided into two compartments.The upper compartment shall house the battery charger & DCDB with all necessary controls. The lower compartment shall be suitable for housing the batteries. Tech specification shall be as under:-(a) Input working voltage-180 -270 Volts(b) Nominal Input Voltage - 230 V , AC , 50 Hz,1 (c) On load input power factor- > 0.8 (d) On load unit watt efficiencies-> 80%(e) No load losses of complete charge-< 10% (f)Ripple contents on the load (RMS)= 1% to 5% (g) Over load - 110% for 30 minutes and will give visual indication for over load condition. (h) Boost charging - 2.4 V/Cell . (j)Float charging -2.15 V/Cell (k)Float cum boost charging-Automatically changes from one state to another state as per battery condition and will give the visual indication for either float or boost based on charging mode. (l)Reverse polarity -No damage will caused .A visual indication for reverse polarity will appear with an audio alarm. (m)Short circuit-MCB protecton provided. Make of battery charger. Statcon/Sinetrac/Amar Raja Make of batteries. Exide/Amaron/Okaya(n) The battery bank system shall be designed to supply power to following loads :-(i) SCADA(ii) Inverter auxillairy supply 22 (iii) Capacity of battery bank shall be done considering the above mention load at power factor of 0.8 lagging inclusive of 10% design margin at 50ºC.Note:- All suitable size of copper cables as per load requirement for interconnection to above loads here-in-before shall be provided by the contractor and deemed to be included in quoted rates(J) DATA ACQUISITION SYSTEM/PLANT MONITORING & SCADA :- Supply,fixing,testing and commissioning of SCADA system Monitoring system with 65 inch Screen at site with Local LDMS and for Remote Monitoring 55 inchs screen in Engineer-in-charge office to be provided for the performance of the SPV on cloud. plant, inverter ,power, array voltages, array currents & AC parameters,energy yield, temperature,irradiance level etc. and it could provides flexible interface to facilitate PC based inverter monitoring and control via GPRS modem and internet/ethernet connection. This should have include web visualization system and data logger with integrated ethernet port. (i) Data acquisition System shall be provided for each of the solar PV plant. (ii) Data Logging Provision for plant control and monitoring, time and date stamped system data logs for analysis with the high quality, including latest version available of PC & Printer. Metering and Instrumentation for display of systems parameters and status indication to be provided (iii) Solar Irradiance: An integration Pyranometer/Solar cell based irradiation sensor (along with calibration certificate) provided, with the sensor mounted in the plane of the array. Readout integrated with data logging system. (iv) Temperature: Temperature probes for recording the Solar Panel temperature and ambient temperature to be provided complete with readouts integrated with the data logging system.(v) The parameters like AC Voltage, AC Output current, Output Power, Power factor, DC Input Voltage, DC Input Current, Time Active, Time disabled, Time Idle, Energy Produced, Protective function limits (Viz-AC Over voltage, AC Under voltage, Over frequency, Under frequency ground fault, PV starting voltage, PV stopping voltage etc are accessible via the operating interface display in real time separately for solar power plant. (vi) All major parameters available on the digital bus and logging facility for energy auditing through the internal microprocessor and read on the digital front panel at any time and logging facility (the current values, previous values for up to a month and the average values) should be made available for energy auditing through the internal microprocesor and should be read on the digital front panel. (vii) PV array energy production: Digital Energy Meters to log the actual value of AC/DC voltage, Current & Energy generated by the PV system provided. Energy meter along with CT/PT should be of 0.5 accuracy class. (viii) Computerized DC String/Array monitoring and AC output monitoring shall be provided as part of the inverter and /or string/array combiner box or separately (ix) String and array DC Voltage, Current and Power, Inverter AC output voltage and current (All 3 phases and lines), AC power (Active, Reactive and Apparent), Power Factor and AC energy (All 3 phases and cumulative) and frequency shall be monitored. (x) Computerized AC energy monitoring shall be in addition to the digital AC energy meter. 23 (xi) The data shall be recorded in a common work sheet chronologically date wise. The data file shall be MS Excel compatible. The data shall be represented in both tabular and graphical form (xii) All instantaneous data shall be shown on the computer screen. (xiii) Provision for Internet monitoring and download of data including recharging shall be also incorporated till the duration of contract. (xiv) Software shall be provided for USB download with life time license and analysis of DC and AC parametric data for individual plant (xv) Remote Server and software for centralized Internet monitoring system shall be also provided for download and analysis of cumulative data of all the plants and the data of the solar radiation and temperature monitoring system. (xvi) Ambient /Solar PV module back surface temperature shall be also monitored on continuous basis. (xvii) Simultaneous monitoring of DC and AC electrical voltage, current, power, energy and other data of the plant for correlation with solar and environment data shall be provided. (xviii) Remote Monitoring and data acquisition through Remote Monitoring System with latest software/hardware configuration and service connectivity for online/real time data monitoring/control complete to be supplied and operation and maintenance/control to be encurred by the supplier. Provision for interfacing these data on Engineer-In-Charge Computer/display device and portal.NOTE:- The cost of all equipments , internet, ethernet connections, connected cables, Server, printer etc. are included in this item All licensee of windows server, MS office or any other software required for functioning of SCADA is deemed to be included in quoted rates for life time. Recharge of GPRS/3G/4G/5G network for 5 yrs from date of completion shall be reponsibilty of contractor and rates quoted are deemed to include the same. Training: On successful commissioning of the plant, training shall be provided on Plant operations and maintenance to a team (Engineers and Technician/Operations) as nominated by GE for 07 days at the time of handing over of solar plant after completion of phase-I.K) WEATHER MONITORING SYSTEM : Complete one set for Chumathag As a part of weather monitoring system the contractor shall provide the following measuring instruments with all necessary software and hardware required to integrate with SCADA.(i) Pyranometer : The contractor shall provide minimum 04 Nos of secondary standard pyranometer (ISO 9060 classification alongwith necessary assessories for measuring incidental solar radiation at horizontal and inclined plane of array. Specificiation of the pyranometer shall be asfollows:- Spectral response : 0.31 to 2.8 micron ,Time response (95%) : Max 15 second ,Nonlinearity ± 0.5% ,Temperature response : ± 2% ,Tilt error <± 0.5% ,Zero offset thermal radiation ±7W/Sqm ,Zero offset temperature change ± 2 W/Sqm ,Operating temperature range O ºC to 80ºC ,Non stability Maximum ±0.8% ,Resolution minimum +/- 1 W/Sqm : Output Analog 4-20 mA, ,Digital RS 485 Each instruments shall be supplied with necessary length of cable calibration certificate with calibration ,traceability to world radiation reference(WRR) or world radiation centre shall be furnished alonwith the equipments.The GE reserves the right to check the calibration at the expense of the contractor. 24 The signal cable length shall not exceed 20 m .The contractor shall provide instrument manual in hard and soft form.(L) Protection switch gears: Supply, installation, testing and commissioning of factory made outdoor type, LT panel weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick with internal partition of 1.6 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and aluminium busbar of capacity not less than 2000 Amp, outdoor type , frame factory fabricated , duly powder coated painting having thickness not less than 100 microns provided suitable gasket, suitable for 3 Phase4 wire, 415 Volts, 50 Hz, AC supply system, including the following :- (a)ACB 1250 Amps capacity adjustable type , 4 pole 50 KA, 800 V, 50 HZ draw out type breaking capacity 50 KA( Icu=Ics=Icw=50KA) microprocessor protection. (b) MCCB 400 A, 4 pole, 415 volts, 50 Hz - 03 Nos (C) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 800 V duly moounted on porcelain insulators -01 Set (d) Digital amp meter 3 ph programmeable type with suitable1600 Amps -01 Set (e)Digital volt meter 3 ph programmeable type with suitable0- 800 volts -01 Set (g) CT 1250/5A/5A, PT 100VA CL 0.5/3P (h) LED phase indicator (RYB )-01 Set. All DC & AC circuits shall be suitably protected using appropriate circuit breakers and isolators, fuses and relays annunciator & system condition displays. Protection switchgears on AC side shall have LT ACB 1250 Amps capacity adjustable type , 4 pole 50 KA, 800 V, 50 HZ draw out type breaking capacity 50 KA( Icu=Ics=Icw=50KA) microprocessor protection based with overload ,short circuit over voltage, under voltage, over frequency , under frequency , earth fault and instantaneous over current protection unit , electrically operated with manual spring charge facility , having indication for earth /over load /overvoltage/ under voltage/ over frequency/ under frequency complete with digital meter. Note:- Panelshall be provided as per approved SLD.(M) Cable Duct / Conduit DWC Pipe : Cable duct/ cable tray of appropriate size from solar panel to inverter/ transformer and cable duct made from PCC etc incl MS plates duct cover 6 mm thick (plain orchequered) channels square cut or notched ( ordinary & counter sunk) forming holes without any attachment complete all as spd and directed.Note: (a) There should be provision of vertical separation between power and control cable duct. (b) Cable ductshall be provided as per approved drg . 25 Supply, installation testing and commissioning of outdoor type step up transformer Inverter duty type low losses of 1 MVA, 0.800/11KV, 3 phase, 50 HZ, ONAN Cooled oil immersed copper wound out door type Step up Transformer delta/delta (Δ/Δ) complete with first oil filling and other standard fitting / accessories and Off load tap changer (Taping Range ± 5% in step of 2.5% each) suitable for feeding supply generated from solar power plant to existing transmission line with Including the following : 26 HV Bushing 33 KV and LV Cable Box suitable for chumathang area of Alt 4200 m along with necessary bus bars with adaptor box suitable for terminating incoming cables from inverter. Marshalling Box (having TTB Only ) all as specified and directed (i) Buchholz Relay trip contact and shut off valves. (ii) PRVRelay Trip (iii) Oil temperature indicator 150 mm dia with alarm and trip contact. (iv) Winding temperature indicator with alarm and trip contacts (v) Marshalling box 200 TB (MK) -03 Nos (6 No of terminal , 3 phase primary and 3 phase secondary, Bolted or plu in type terminal, cable entry 3X 50 sqmm (primary) and 3 X 120 sqmm (secondary) cable ties, clips or trays ) (vi) Magnetic oil level gauge. (vii) Pressure release valve (PRV) with trip contacts.(viii) Conservator with oil filling hole with cap and drain plug and wit built in diaphragm to avoid direct air contact with transformer oil. (ix) Oil level indicator with minimum level marking.(x) Thermometer pockets with thermometer. (xi) Silica gel breather (xii) Air Release plug. (xiii) Lifting Lugs (xiv) Earthing terminals (xv) Bi-directional Rollers (xvi) Anodized aluminum rating and diagram plate. (xvii) Off load Tap changer including indoor remote control panel. (xviii) Top filter valve (xix) Including transformer platform as per OEM recommendation is deemed to be included in quoted rates.Following protections shall be integrated with RMU Necessary equipments/metering devices shall be instaled in transformer.(a) Instantaneous overcurrent (b) AC time over current (c) Neutral & residual instantaneous over cuurent (d) Neutral & residual time overcurrent (e) master trip (f) anti pumping (g) trip circuit supervision (h) DC failure (i) WTI and OTI (j) pressure relief (k) Buchholz (l) Differential protectionNOTE:-The following works /items shall deemed to be included in the above quoted rates and no extra payment shall be made to the contractor on this account. (i) The erection /installation of transformer with suitable size of foundation as per OEM recommendation is deemed to be included in quoted rates (ii) Rates quoted is inclusive of all control cables of suitable size and core(as per manufacturer recommendations) from buchholz relay, PRV, OTI & WTI of power transformer to various controls ie CTS/PTs & HT panel and control panels. (iii) LT single core cable /LT bus bar of suitable size and capacity from LT panel to step up transforemers LT side including appropriate size of cable lugs as required at site for connection complete all as specified and directed. (iv) The step up transformer shall be suitable for inverter input to avoid/reduce/capable for odd harmonics and heat losses. 27 Supply, installation testing and commissioning of outdoor type distribution low losses as per Level II part I (IS:1180) of 1.25 MVA, 0.415/11KV, 3 phase, 50 HZ, ONAN Cooled oil immersed copper wound out door type Step up Transformer delta/star (Δ/Υ) (complete with first oil filling and other standard fitting / accessories and Off load tap changer (Taping Range ± 5 % in step of 2.5% each) suitable for feeding supply generated from solar power plant to existing transmission line with Including the following : 28 HV bushing and LV Cable Box along with necessary bus bars with adaptor box suitable for terminating incoming cables frominverter. Marshalling Box (having TTB Only ) all as specified and directed (i) Buchholz Relay with alarm and trip contact and shut off valves. (ii) Oil temperature indicator 150 mm dia with alarm and trip contact. (iii) Winding temperature indicator with alarm and trip contacts (iv) Marshalling box 200 TB (MK) -03 Nos (v) Magnetic oil level gauge. (vi) Pressure release valve (PRV) with trip contacts. (vii) Conservator with oil filling hole with cap and drain plug and wit built in diaphragm to avoid direct air contact with transformer oil. (viii) Oil level indicator with minimum level marking. (ix) Thermometer pockets with thermometer. (x) Silica gel breather (xi) Air Release plug. (xii) Lifting Lugs (xiii) Earthing terminals (xiv) Bi-directional Rollers (xv) Anodized aluminum rating and diagram plate. (xvi) Off load Tap changer. (xvii) Top filter valve (xviii) Differential relay protection for power transformer Following protections shall be integrated with RMU Necessary equipments/metering devices shall be instaled in transformer.(a) Instantaneous overcurrent (b) AC time over current (c) Neutral & residual instantaneous over cuurent (d) Neutral & residual time overcurrent (e) master trip (f) anti pumping (g) trip circuit supervision (h) DC failure (i) WTI and OTI (j) pressure relief (k) Buchholz (l) Differential protectionNOTE:-The following works /items shall deemed to be included in the above quoted rates and no extra payment shall be made to the contractor on this account. (i) The erection /installation of transformer with suitable size of foundation as per OEM design is deemed to be included in quoted rates .(ii) Rates quoted is inclusive of all control cables of suitablesize (as per manufacturer recommendations) from different relays buchholz relay of power transformer to various controls ie CTS/PTs & HT panel and control panels. (iii) LT single core cable /LT bus bar of suitable size and capacity from LT panel to step up transforemers LT side including appropriate size of cable lugs as required at site for connection complete all as specified and directed. (iv) The transformer shall be suitable for inverter input to avoid/reduce/capable for odd harmonics and heat losses. 29 Supply, installatioon , testing and commissiooning of factory made outdoor type 4 Way 2x630 Amp SF6 + 2x630Amp LBS out door type 11 KV Ringmain Unit with Space Heater at Altitude 4200m, 630 Amps IAC 20 KA for 3 sec suitable for solar power system confirming to relevant IS/IEC, LSC 2B having following specification and comprising of following:- (i) Electrolytic copper bus bars, droppers and bus bar should be insulated with full system voltage sleeves. Each SF6 breaker shall comprise of following 30 (ii) Trolly mounted vaccum circuit breaker as per IEC-62271-100 SF6 circuit breaker should have three Nos resin encapsulated vaccum bottles.(iii) Motorized spring charging mechanism 230V AC 50 Hz with integral spring charging handle for manual spring charging. (iv) Cast resin current transformer 11KV, 200/1-1A, Core-I: class 1.0, 5VA, core2:5P10,5VA.Bushing shall be of 11 KV (v) Cast resin potential transformer 11KV/√3/110V, 50VA, class 0.5Cl 3P, bushing shall be 11KV KV and HT fuse at the primary end and 4P MCB at secondary end of PT. (vi) Accessoories like local/remote switch, breaker control switch (T-N-C) space heater with thermostat, DC and AC control circuit through MCB, indicating lamps for RYB, spring charge, DC supply healthy, breaker ON/OFF , breaker in SERVICE/TEST. (vii) Multifunction meter with RS 485 port , on MODBUS Protocol. (viii) Digital ammeter and digital voltmeter. (ix) Master trip relay-01 No and Aux relay TCS, DC Fail, OC & E/F (x) Comprehensive numarical protection relay on MODBUS protocol compatiable for directional and non directional O/C, E/F, U/V, O/V protection, Pressure switch or gas density monito, Frequency relay, Breaker failure protectionTransfomer protection Bucholz protection, PRV,Differential protection, OTI, WTI Relay and panel should have following additional facilities:- (xi) Trip Ckt supervision, AC fail, DC fail (xii) Disturbance recorder. (xiii) Event log with date and time (xiv) Measurment and control feature (xv) Fully internal arc type tested. (xvi) SF6 bottles should be epoxy encapsulated. (xvii) Racking in/out, manual closing/tripping of CB with compartment door closed. (xviii) Breaker shall be provided with following contacts:- (xix) Auxilary switch with 6 No + 6 NC mounted on the draw out portion of the switchgear. (xx) Position switch with 3 NO + 1NC contacts for eachposition in SERVICE and TEST.(xxi) 16 window annunciater with hooter/alarm for OC,SC,OV,UV,TCS,DC Fail, AC Fail OTI,WTI,PRV,Bucholz, Differential, OF, UF, Gas density low, Breaker failure protection 31 Material and Labour for Earthing complete with GI earthplate electrode 600mm x 600mm and not less than 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to GI strip of size 32x6mm by means of bolts, nuts, check nuts and washers of GI/steel all as shown in electric plate No 3 connected to equipmentscomplete and including char coal dust & salt filling in alternate layers (each layer shall be 15 cm thick)and GI protection pipe, medium grade 40mm dia and GI watering pipe 20mm, medium grade with funnel and wire mesh, 40mm thick pre-cast RCC, M-15 (nominal mix) cover reinforced with XPM weight not less than 4kg/sqm with suitable handle of 6mm dia MS bar and angle iron 40 x 40 x 3mm frame for cover, PCC M-15 (nominal mix) pit, excavation and earth work in any type of soil and connectedcomplete all as specified and directed. 32 Material and Labour for earthing complete with and including copper earth plate electrode 600 mm x 600 mm x 3.15 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected to copper trip earth lead wire 25x6 mm dia by means of nuts, bolts, checknuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SI Part-I. 33 Material and Labour for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr belowground level connecting to galvanisedearth lead wire 4mm dia by means of bolts,check nuts and washers and earth lead protected by provision of GI pipe light grade 15mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 KG/Sqm) and frame of angle iron 25 X 25 X 3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, connecting to test pointwith fixing arrangement, funnel, wire mesh and earth work in hard/dense soil,returning filling in and removal of surplus soil to a distance not exeeding 50 mtr, all as per electrical plate No 3all as specified and testing on completion. Note :- Cost of earth lead upto 7.5 mtr and GI 15mm bore pipe is deemed to be included in unit rate. 34 Supply, installation, testing and commissioning of factory made, DG disribution cum DG syncronization panel of suitable size, outdoor type made out of CRCA sheet 3.15 mm thick with partition of 1.6 mm, frame factory fabricated with front and back openable double door with locking arrangement, with MS angle section 50x50x6 mm support, duly powder coated painting having thickness not less than 100 microns provided suitable gasket to make it dust and vermin proof, suitable for 3 Phase4 wire, 415 Volts, 50 Hz, AC supply system,comprising of following :- (a)Distribution panel with ACB 2500Amp microprocessor release operation type, 415 Volt 50 KA 1 Nos 2500 Amp ACB (b) DG Synchronizing panel- DG Sync Panel with double busbars required for sync 3 nos 400 KVA DG set after Sync Power fed to 2500 Amp Distribution Panel (c)Control Ckt require for DG Sync With PV System, Logic of this control ckt : DG 1, 400 KVA on all time with minimum 30% load and when load increase 80% DG2 400 KVAstart and so on for all 3rd Nos 400 KVA DG) Note: DG syncronization panel shall be provided as per approved SLDcomplete all as specified and directed.. 35 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1.9/3.3 KVgrade, cross-sectional area 400 Sqmm 3 core for solar ACB panel to inverter duty transformercomplete all as specified and directed. 36 Supply and fixing of cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrinkable type joint complete with jointing meterial and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size400 Sqmmcomplete all as specified and directed. 37 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 400 Sqmm 3.5 corecomplete all as specified and directed. 38 Material and Labourfor Sand cushing to under ground cable, provided with 8 cms thick layer before laying the cable and 15 cm thick after laying and streching the calbe complete all as specified and directed. 39 Supply and laying unreinforced precast concrete cable cover on the cable in the trench,classl LV, Type-I, flat size 250mm X150mmX50mm(1100 volts LT cable)complete all as specified and directed. 40 Supply and laying Unreinforced precastconcrete cable coveron the cable in the trench , class HV, Type-I, flat size 300mm X180mmX50mm (for 11KV HT cable)complete all as specified and directed. 41 Material and Labour for Solar HT Generation meter AC three phase, multifunction net meter of accuracy class 0.5s, rated voltage 110 V Ph-Ph or 3 X 63.5 V Ph-N, voltage range + 15% to - 30% of rated voltage, basic current 1 Amps or 5 Amps, maximum continuous current 2 times (200%) of basic current , starting current 0.1% of basic current, frequency 50 Hz and operating frequency range 47.5 to 50.5 Hz , IP 65 protection, Protection: over voltage, over current, over/ under grid frequency, over temperature, short circuit. with optical & RS232 port, backlit LCD display, (measures import kWh, kVAh, Export kWh, kVAh , Net kWh, kVAh, V,I, kW, 6 month history of energy, load survey, tamper detection & logging, power On/Off events, instantaneous parameters of rating -/5A with display in absence of powercomplete all as specified and directed. 42 Shifting of DG set of capacity 3 x 400 KVA from location Upper and lower chumathang (Upto 2 Km) near to SPV plant location with all connected items including installation, connection with cable, making of suitable size as per existing 3 Nos PCC plateform of 400 KVA DG set all as per specified and directed 43 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 630 Sqmm 3.5 corecomplete all as specified and directed. 44 Material and Labour for Rolling and consolidation formation surface in cuttingto required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed. 45 Material and Labour for soiling (or Sub Base) 200mm thick (Spread thickness) with broken boulders or quarred stone interstices filled, surface formed and surface formed and rolled and consolidated torequired gradient and camber with 8 to 12 tonne power roller, complete all as specified and directed. 46 Material and Labour for cement concrete work in pavement/hardstanding of flexural strength 40 kg/sqcm in field using 400 kg of cement per Cum for thickness of concrete 20 cm including brooming the surface complete all as specified and directed. 47 Material and Labour for forming contraction (Dummy) joints 80mm deepx 10mm wide filled with sealing compound grade B complete all as specified and directed. 48 Material and Labour for forming 20mm thick expansiion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade B for 200mm thickness of concrete slab complete all as specified and directed. 49 Material and Labour for 150mm thick (compacted thickness) WMM in two equal layers 75mm thick each layer with coarse aggregates of lime stone, sand stone flint or quartizite of grading 2 (63 to 40mm size) spread, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed. 50 Material and Labour for Cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concretecomplete all as specified and directed. 51 Material and Labour for Cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching, coping around poles (aove GL) etc including weathering slightly rounded or chamfered angles and fair finshing the exposed surfaces or concrete using extra cement cmplete including necessary form workcomplete all as specified and directed. 52 Supplying, installation, commissioning and testing of transformer step down 11/0.415KV capacity750 KVA, Level II, IS 1180 Part I, out door type copper wound 3 phase, 4 wire, 50 cycles per second, oil immersed naturally cooled external cooling tube core type delta connection on primary side (HV side) and star connection on secondary side (LV side) having tapping 0,± 2.5%, ±5%, ±7.5% to be charged by means of hand operated, off load/tap changing gear including first filling of new transformer oil of dielectric strength not less than 60 KV with standard fittings such as two earting terminals for body and one additional for neutral brought out inbushing, oil level gauge indicator for level minimum and maximum, lifting lugs, rating and termina plate, plain breather device to prevent ingress of rain water and inserts, drain cum sampling valve 20mm bore steel with plug,dial type thermo meter, oil filling hole 32mm threaded with plug. The transformer shall be powder coated for water/dust and vermin proof. Note :- (1) Transformer oil shall be conforming to requirements of IS-335-1983 specification for newinsulating oil for transformers.(2) Equipment shall be suitable to operate at 4200 mtr above MSL at temperature variation between -35˚C to (+)35˚ C including platform as per OEM recommendation is deemed to be included in quoted rates (For lower Chumathang) 53 Supplying, installation, commissioning and testing of transformer step down 11/0.415KV capacity400 KVA,Level II, IS 1180 Part I, out door type copper wound 3 phase, 4 wire, 50 cycles per second, oil immersed naturally cooled external cooling tube core type delta connection on primary side (HV side) and star connection on secondary side (LV side) having tapping 0,± 2.5%, ±5%, ±7.5% to be charged by means of hand operated, off load/tap changing gear including first filling of new transformer oil of dielectric strength not less than 60 KV with standard fittings such as two earting terminals for body and one additional for neutral brought out inbushing, oil level gauge indicator for level minimum and maximum, lifting lugs, rating and termina plate, plain breather device to prevent ingress of rain water and inserts, drain cum sampling valve 20mm bore steel with plug,dial type thermo meter, oil filling hole 32mm threaded with plug. The transformer shall be powder coated for water/dust and vermin proof. Note :- (1) Transformer oil shall be conforming to requirements of IS-335-1983 specification for newinsulating oil for transformers.(2) Equipment shall be suitable to operate at 4200 mtr above MSL at temperature variation between -35˚C to (+)35˚ Cincluding platform as per OEM recommendationis deemed to be included in quoted rates (For additional pocket & Upper chumathang)complete all as specified and directed. 54 Material and Labour for Steel tublar swaged poles erected truly vertical or planted as strut complete with 6 mm thick mild steel base plate, welded to pole, B-118 final taper cap,bolts,nuts & screws, poles made out of ERW MS tubing conforming to IS 2713 Part-II. Type 410-SP-55 (11 m long) including drilling of holes of required size for fixing of cross arms, paintin g the exposed surfacs of pole with two coats of aluminium paint over a coat of two coats of zinc chrome3 primer and two coats of black bitumenous paint internally & portion embadded in concrete, making five black & white bands at lower portion of pole each 300 mm wide alternatley, and marking pole No. with black paint at suitable height complete all as specified and directed.(For two/ four pole structure) Note :- Excavation and earth work, PCC in foundation shall be measured and paid for separetely.complete all as specified and directed. 55 Material and Labour for Switch air break gang opertated tripple pole mechanically operated from ground level mounted, outdoor type suitable for vertical instatllation single break provided with locking arrangement for operating handle with lock consisting of mild steel channelHT post top insulator copper alloy high pressure assembly 33 KV grade complete with all accessoriescomplete all as specified and directed. 56 Supply & fixing lightning arrestor, high tension, polymer type gapless complete with all fitting transmission class, of capacity 33 kilo voltscomplete all as specified and directed. 57 Material and Labour forCross arms, bracing , supports, clamps and aback plates ,fabricated out of structural steel sections incuding nuts, bolts,washers,welding,bending cold or hot, drilling holes for bolts in any shape or size as indicated or coat of red oxide zinx chrome primer, one under coat and one finshing coat of aluminium paint complete all as specified. 58 Supply, laying, testing and commissioning of aluminium conductor, XLPE insulated, PVC inner sheathed, GI strip or wire armoured & overall PVC sheathed cable of 11 KV (Earthed) grade in trenchesl/ in GI pipe including dressing and clamping the cable with MS clamps of cross section area 185 Sqmm 3 corecomplete all as specified and directed. 59 Supply, laying, testing and commissioning of aluminium conductor, XLPE insulated, PVC inner sheathed, GI strip or wire armoured & overall PVC sheathed cable of 11 KV (Earthed) grade in trenchesl/ in GI pipe including dressing and clamping the cable with MS clamps of cross section area 120 Sqmm 3 corecomplete all as specified and directed. 60 Supply and fixing of cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrinkable type joint complete with jointing meterial and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size120 sqmm to 185 sqmmcompleted all as specified and directed. 61 Material and Labour for ACSR conductor for the provision of HT OH lineof sizes,3 of 6/1X3.0 (Ferret), 3 of 6/ 1x2.59 ( weasel) completed all as specified and directed. 62 Material and Labour for galvanised steel wire of4 mm dia with hooks stretching kinks and bends completed all as specified and directed. 63 Anticlimbing devices spikes type fabricated out of MS bars (round square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and shown on drawings. 64 Supply and fixing pin type 10 KN polymer type, porcelain, viterous white, brown or green insulator including one mild steel spindle,for 33000 volts grade incl all accessories for fixing of pin insulator completed all as specified and directed. 65 Supply and fixing disc type 90 KN polymer type, porcelain, viterous white, brown or green insulator including one mild steel spindle,for 33000 volts grade incl all accessories for fixing of disc insulator completed all as specified and directed. 66 Supply and fixing of Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letter, figures and conventional skull and bones in signal red colour and fixed with M.S clamps, bolts and nuts of approved size, for HT,25x20cm sizecomplete all as specified and directed. 67 Material and Labour for Galvanised steel tubing light grade 80 mm bore laid in trenches orfix to wall/hole with fitting as required for cable protectioncomplete all as specified and directed. 68 Material and Labour for Galvanised steel tubing light grade 100 mm bore laid in trenches orfix to wall/hole with fitting as required for cable protectioncomplete all as specified and directed. 69 Material and Labour for stay assembly complete using stay rod of 20 mm dia complete with accessories as shown in electric plate no 1 of SSR-2009 Part -I complete all as specified and directed by Engr-in-Charge Note: (Unit rate quoted by contractor herein before also includes earth work and PCC work ,Loop type insulator ,stay clamps ,nuts ,bolts ,washers and concretecomplete all as specified and directed. 70 Material and Labour for galvanised stay strand, size 7/4 mmcomplete all as specified and directed. 71 Supply and fixing of loop type porcelain vitreous white ,brown or green insulator large size with overall dimensions 90x140 mm,clearance of hole 25.5 mm complete all as specified and directed 72 Supply and install LT panel outdoor type weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and aluminium busbar of capacity not less than 2200 Amp insulated with PVC sleeves and coloured with (R,Y,B and Black) with angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. 73 Under composion of following.(LT panel No-01 Lower Chumathag)(i)ACB 415 V, 4 pole, 1600 Amp, 50 KA -01 No (Incoming)(ii) ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Outgoing)For existing DG panel (iii) ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Outgoing)For existing DG panel(iv) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 2500 Amps duly moounted on porcelain insulators -01 Set (v) Digital amp meter 3 ph programmeable type with suitable2500 Amps -01 Set (vi)Digital volt meter 3 ph programmeable type with suitable0- 500 volts -01 Set (vii) LED phase indicator (RYB )-01 Set 74 Supply and install LT panel outdoor type weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and copper busbar of capacity not less than 1250 Amp insulated with PVC sleeves and coloured with (R,Y,B and Black) with angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. 75 Under composion of following. (LT Panel No-2 upper chumathang)(i)ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Incoming cum outgoing) (ii) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 1200 Amps duly moounted on porcelain insulators -01 Set(iv) Digital amp meter 3 ph programmeable type with suitable 800 Amps -01 Set(v)Digital volt meter 3 ph programmeable type with suitable 0-500 volts -01 Set (vi) LED phase indicator (RYB )-01 Set 76 Supply and install LT panel outdoor type weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and copper busbar of capacity not less than 1250 Amp insulated with PVC sleeves and coloured with (R,Y,B and Black) with angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. Under composion of following. (LT Panel No-3 upper chumathang additional pocket) 77 (i)ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Incoming)(ii) MCCB 415 V, 4 pole, 200 Amp, 25 KA -1 No (Out Going), MCCB 415 V, 4 pole, 400 Amp, 36 KA -1 No (Out Going) MCCB 415 V, 4 pole, 100 Amp, 25 KA -1 No (Out Going)(iii) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 1250 Amps duly moounted on porcelain insulators -01 Set (iv) Digital amp meter 3 ph programmeable type with suitable 800 Amps -01 Set (v)Digital volt meter 3 ph programmeable type with suitable 0-500 volts -01 Set (vi) LED phase indicator (RYB )-01 Set 78 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 300 Sqmm 3.5 core complete all as specified anddirected 79 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 Sqmm 3.5 core complete all as specified anddirected 80 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 Sqmm 3.5 core complete all as specified anddirected 81 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core complete all as specified anddirected 82 Supply and fixing of LED Street light of 70 Watt , IP66 power coated pressure die cast aluminium housing with high efficiency LED as lighting source and toughened glass complete all as specified anddirected 83 Supply and install LT panel box outdoor type weather & vermin proofsuitable for single phase 230 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and aluminium busbar of capacity not less than 100 Amp insulated with phase indicator incl angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. Under composion of following.(For Street light)(i) MCB SPN 6-32 Amps, 230V, 10 KA -01 No (Incoming)(ii) MCB SP 6-10 Amps, 230V, 10 KA -02 No (outcoming)(iii) Bus bar chamber with and including aluminium strip ( 2 Nos) suitable for 100 Amps duly moounted on porcelain insulators -01 Set (iv) LED phase indicator (RYB )-01 Set 84 Supply and fixing GI bracket 1.2 m long made out of GI pipe 40mm dia mediam grade with necessary clamp for fixing nut and bolts and connection complete all as specified anddirected 85 Material and Labour for Steel tublar swaged poles erected truly vertical or planted as strut complete with 6 mm thick mild steel base plate, welded to pole, B-118 final taper cap,bolts,nuts & screws, poles made out of ERW MS tubing conforming to IS 2713 Part-II. Type 410-SP-31 (09 m long) including drilling of holes of required size for fixing of cross arms, paintin g the exposed surfacs of pole with two coats of aluminium paint over a coat of two coats of zinc chrome3 primer and two coats of black bitumenous paint internally & portion embadded in concrete, making five black & white bands at lower portion of pole each 300 mm wide alternatley, and marking pole No. with black paint at suitable height complete all as specified and directed.Note :- Excavation and earth work, PCC in foundation shall be measured and paid for separetely. 86 Supply and fixing of 2.5 sqmm copper conductor cable for street light connection from junction box to street light at pole all as specified and directed by Engr-in-charge 87 Supply and fixing of junction box made out of PVC box with necessary clamps for fixing busbar with MCB SP 6 Amps and necessary connection from street light to junction box with 2.5 sqmm x 3C copper conductor cable complete all as specified anddirected 88 Material and Labour for Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching completely surrounding pipes with concrete after they laid and tested for 150 mm bore NP 2 pipe, complete all as specified and directed. 89 Material and Labour forM&L for Reinforced concrete pipes,class NP2,dia 150 mmlaid and jointed complete with collars complete all as specified and directed. 90 Material and Labour for PCC 1:2:4 Type B1 using 20 mm garded stone agg as in coping including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. 91 Supply onlyliquid water proofing compoundcomplete all as specified and directed. 92 Material and Labour forTMT bars 10mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia, or securing with clips, rungs, handles completeall as specified and directed. 93 Material and Labour forprecast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in manhole coverslabsincluding necessary formworks set in cement mortar 1:4 complete all as specified and directed. 94 Material and Labour for cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in surface channel and inside drains of manhole complete all as specified and directed. 95 Material and Labour for Mild steel rungs and handle made to shape out of 16mm dia round barsconforming to Fe-290grade E-165including fixing/embedding in concrete /masonrypainted with two coats of bituminous paint complete all as specified and directed. 96 Extra forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and directed. 97 Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exc 200mm thick (horizontal or sloping) for flat fair finished surfaces complete all as specified and directed. 98 Material and Labour for construction of septic tank for 10 users designed to carry sewage and sewage water, excavation in any type of soil, PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregates in foundation, precast cement concrete block masonry wall, RCC cover slab complete all as specified and directed and shown on drawing. 99 Material and Labour for construction of soakage well with excavation in any type of soil complete all as specifiedand directed and shown on drawing. 100 Material and Labour for MS work as in posts and struts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 101 Supply only chain link MS galvanised fencing any size or type complete all as specified anddirectedNote : weight of chain link fencing shall be checked by BOO detailed by GE. 102 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails straining bolts etc including provision of binding wire complete all as specified and directed. 103 Material and Labour for prepration of new or previously untreated steel surface & priming with red oxide primer and applying two coats of synthetic enamel paint of any description over 10cm width or girth not otherwise described complete all as specified and directed. 104 Material and Labour for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 105 Material and Labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 22.5cm longand diameter of neck 11 to 15mm complete all as specified and directed. 106 Material and Labour for construction of steel gate 5.5m wide and 3m high with RCC pillars including excavation and earth work and all other relevant works complete all as specified and directed. 107 Excavation over area not exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed. 108 Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out inhard/dense soil. Complete all specifed and directed. 109 All as per Srl No. 94. above but exc 1.5 m or part there ofin depth beyond the first 1.5m complete all as specified anddirected 110 Excavation in post holes (or similar holes) each not exc 0.5 Cum getting out returning filling and ramming earth or broken rubble mixed with earth around in layers not exc 25cm watering and removing surplus soil to a distance not exc 50 and making good surface in hard/dense soil complete all as specified and directed. 111 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed . 112 Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. 113 Removing excavated rocks material from site n exc. 50 m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified anddirected
Contract Date: Jun 20, 2026 Contract Value : ₹ 6.14 Crore
Statutory Bodies & Commissions/Committees No of Bidders 9
Ladakh View Result →
25.
Agriculture #10988522 Technical Bid
Tender for Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter. All Kinds Of Soils , Add Extra For Foundation/Trenches/Drains For Every Additional Lift Of 1.5 Mtr. Or Part Thereof In, All Kinds Of Soil , Supplying And Filling In Plinth With Blown Sand Under Floors Including Watering Ramming Consolidating And Dressing Complete Including Cost Of Sand. , Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M10 Grade Nominal Mix 1: 3: 6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). , Providing And Laying In Position Specified Grade Of Cement Concrete For All Reinforced Cement Concrete Structural Elements Upto Plinth Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement. M20 Grade Nominal Mix / Design Mix , Providing And Laying In Position Specified Grade Of Cement Concrete For Reinforced Cement Concrete Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers (If Required ) Excluding The Cost Of Centering, Shuttering And Reinforcement For Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc.M20 Grade Nominal Mix / Design Mix , Providing And Laying In Position Specified Grade Of Cement Concrete For Reinforced Cement Concrete Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement For Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases Etc.M20 Grade Nominal Mix / Design Mix , Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways And Removal Of Formwork For Foundation , Footings, Strap Beam, Raft , Bases Of Columns Etc. , Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Props And Removal Of Formwork For Upto Floor Five Level For :Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands, Coping Bed Plates, Anchor Blocks, Sills, Chhajjas, Lintel, Beam, Plinth Beam Etc. , Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Props And Removal Of Formwork For Upto Floor Five Level For :Columns, Pillars, Posts And Struts Etc. , Providing And Fabricating Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding (Including Cost Of Binding Wire) All Complete Up To Floor Five Level. (Original Producers Who Manufacture Billet Directly From Iron Ores And Roll The Bilets To Produce Steel Conforming To Is:1786)Thermo-Mechanically Treated Bars (Conforming Of Relevent Is Code) , Add Extra For Providing Richer Mixes Respectively At All Floor Levels Providing M-25 Grade Concrete By Using Cement As Per Codal Provision Instead Of M-20 Grade Design Mix. , Random Rubble Stone Masonry For With Hard Stone In Foundation And Plinth In Cement Sand Mortar Above 30 Cm Thick Wall In:Cement Mortar 1:6 ( 1-Cement : 6-Sand). , Brick Work With Clay Flyash F.P.S. Brick (Is 13757- 1993 ) Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor Five Level In : Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) , Add Extra For Square Or Rectangular Pillars In Superstructre Brick Work Up To Five Storey Upto 45 Cm Length And Two Corners Are Free , Half Brick Work With Mechanised Autoclaved Flyash Lime Bricks Conforming To Is: 12894 :2002 Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In. Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) , Supplying And Fixing In Walls Machine Cut And Polished Stone Shelves, Tands And In Cm 1:3 With Machine Cut Edges : Kota Stone Minimum 30Mm Thick. , P & F 1St Qualityheavy Duty Vitrified Polished Digital Tiles On Floor, Skirting And Steps Etc.In Different Sizes (Thickness Minimum 10Mm) With Water Absortion Less Than Or Equal 0.08% And Conforming To Is 15622 Of Approved Make In All Colour And Shade, Laid With 20 Mm Thick Cm 1: 4 Including Grounting The Joints With White Cement And Matching Pigment Etc Complete.Size 600Mm X 600Mm , Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills Counters, Floors Etc. Laid On 12Mm (Av.) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Jointing With White Cement Mortar 1:2 (1White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) Above 3601 Cm2 Slabs , Extra For Providing Edge Moulding To 15-18Mm Thick Marble/ Granite/Kota Stone Counters, Vanities Etc. Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. Granite/Kota Stone Work Full Edge Moulding , Providing And Fixing 1St Quality Standard White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades Glazed Tiles Confirming To Is : 13753 & Is :15622 Of Size 200Mm X 300Mm In Walls, Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Excluding The Cost Of Cement Plaster On Walls And Pillar). , Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300mm Confirming To Is : 13755 And Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Including The Cost Of Cement Mortar Bed 1:4). , Extra For Using Size Above 200X300mm In Glazed Tiles And For Using 400Mm X 400Mm Mat Finished Tiles In Place Of 300Mm X 300Mm Size. Wall Tiles , Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal Dehyderesin In Glue Both Sides With Approved Steel Fittings Complete As Per Annexure A : 30 Mm Thick . Commercial Veneer Both Side , Extra For Providing External Lipping With 2Nd Class Teak Wood Battens 6 Mm Minimum Depth On All Edges Of Shutters (Over All Area Of Door Shutter To Be Measured) Over Item No. 8.13. , Providing And Fixing Pressed Steel Door Frames Confirming To Is 4351 Manufactured From Commercial Mild Steel Sheet Of 1.25 Mm Thickness Including Hinges Jamb, Lock Jamb, Bead And If Required Angle Threshold Of Mild Steel Angle Of Section 50X25mm, Or Base Ties Of 1.25Mm Pressed Mild Steel Welded Or Rigidly Fixed Together By Mechanical Means, Adjustable Lugs With Split End Tail To Each Jamb Including Steel Butt Hinges 2.5Mm Thick With Mortar Guards, Lock Strike-Plate And Shock Absorbers As Specified And Applying A Coat Of Approved Steel Primer After Pre-Treatment Of The Surface Including Filling With cement concrete 1:2:4(M15 Grade) Complete As Directed By Engineer-In-Chargeprofile C : , Providing And Fixing In Position Collapsible Steel Shutters With Vertical M.S. Channels 20 X 10 X 2Mm And Bracket With Flat Iron Diagonals 20 X 5Mm. Size With Top And Bottom Rail Of T-Iron 40 X 40 X 6Mm. With 40Mm Dia Steel Pulleys/Ball Bearing Complete With Bolts, Nuts Locking Arrangements Inside And Outside Stoppers, Handles Etc. As Per Specification Including Applying A Priming Coat Of Approved Steel Primer. (To Be Measured And Paid As Per Outer Dimension). , Providing And Fixing M.S. Sheet 1Mm Thick Single Leaf Door Shutter In Angle Iron Frame 35X35x5mm Suitabilly Diagonally Braced With 25X3mm Flat Iron Above And Below Lock Rail Of Size 50X5mm Beading Extra Including All Fittings, As Per Direction Of Engg. Incharge But Excluding Cost Of Chowkhats: Including Two Coats Of Anit-Corrosive Red Oxide Primer Paint , Providing And Fixing Steel Glazed Window Frame Made Out Of 80X40 Mm Hollow Sheet Section Of 16 Gauge Thickness, Joint Mitred Welded And Grinded Including Hold Fast Of Steel Lugs 13Mm X 3Mm And 15 Cm Long Embedded In C C Block 15 X 10 X 10 Cm Of 1:3:6 Nominal Concrete And Including Fixing Of Pivoted Hinges Of Superior Quality, Window Shutters Made Out Of 50 X 25.0 Mm Hollow Steel Section 15 Mm Paitam Of 18 Gauge Thickness, Joint Mitred And Grinded Including 10Mm X 10Mm Square Bars Welded To Frame For Paitam Fixing Float Glass 4Mm Thick Panes With Glazing Clips And Metal Sash Putty And Fixing Of Shutters Frames Peg Stay, U Shape Handle 100 Mm Long, Tower Bolts 100 Mm Long Of Steel Powder Coated Superior Quality Including Fixing And Jointing With Frame Hinges Priming Coat With Steel Primer Complete In All Respect As Per Direction Of Engineer-In -Charge , (A) Window Openable. , (B) Window Fixed. , Extra For Additional Shutter In Pipe Section Windows With Wire Gauge 14 Mesh X 24 Gauge , Providing And Fixing Square Bars Or Other Flat Welded To Window, Ventilatiors Etc. , Grading Roof For Water Proofing Treatment With Water Proffing Compound Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement Including Cement Slurry, Making Of Lines Or Groove Etc Complete But Excluding The Cost Of Nosing Of Steps Etc. Complete. 75Mm Thick With 20Mm Thick Nominal Size Aggregate. , Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles Including Rubbing And Cleaning Etc. Complete On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Dark Shade Using Ordinary Cement. , Providing And Fixing Of Double Leaf Steel Shutter For Cupboard, The Frame Is Made Of Pressed Steel Isi Section 80X25 Mmx 1.25 Mm Thick With 1.00 Mm Ms Sheet To Spot Welded Including Holdfasts Of 15X3mm, Ms Oxidized Fittings Such As Butt Hinges, Sliding Doors Bolts, Handles, Tower Bolts And Twin Peg Etc Complete Including Applying Priming Coat Of Approved Steel Primer Of Red Oxide Zinc Chromate And Spray Painting In Approved Shade With Deco Paint Of Approved Quality Complete As Per Direction Of Engineer In Charge , 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 (1Cement : 3-Fine Sand) , Plaster On New Surface On Walls In Cement Sand Mortar 1:4 Including Racking Of Joints Etc. Complete Fine Finish :12Mm Thick . , Plaster On New Surface On Walls In Cement Sand Mortar 1:4 Including Racking Of Joints Etc. Complete Fine Finish : 20Mm Thick . , Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete New Plastered Surface (Three Or More Coats) , Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: Two Or More Coats On New Work Including Prepartion Of Base With Primer, Putty, Lippy Etc Complete In All Respect. , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade Including All Scaffolding. New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Base Coat Of Water Proofing Cement Paint Applied @ 2.20 Kg/ 10 Sqm ). , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work , Providing And Fixing Aluminum Work For Doors ,Windows, Ventilators And Partition With Extruded Built Up Standard Tubular / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is :733 And Is :1285, Fixed With Rawl Plugs And Screws Or With Fixing Clips ,Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gap. At Junctions , At Top ,Bottom And Sides With Required Pvc/Neoprene Felt Etc. Aluminium Section Shall Be Smooth ,Rust Free, Straight ,Mitered And Jointed Mechanically Wherever Required Including Cleat Angle Aluminium Snap Beading For Glazing /Paneling , C.P. Brass/ Stainless Steel Screws Al. Tower Bolt & Al. Handle & Al. Aldrop Etc.,All Complete As Per Architectural Drawings And The Directions Of Engineer- In - Charge .(Glazing And Paneling To Be Paid For Separately).For Fixed Portion Powder Coating Aluminum ( Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Aluminum Work For Doors ,Windows, Ventilators And Partition With Extruded Built Up Standard Tubular / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is :733 And Is :1285, Fixed With Rawl Plugs And Screws Or With Fixing Clips ,Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gap. At Junctions , At Top ,Bottom And Sides With Required Pvc/Neoprene Felt Etc. Aluminium Section Shall Be Smooth ,Rust Free, Straight ,Mitered And Jointed Mechanically Wherever Required Including Cleat Angle Aluminium Snap Beading For Glazing /Paneling , C.P. Brass/ Stainless Steel Screws Al. Tower Bolt & Al. Handle & Al. Aldrop Etc.,All Complete As Per Architectural Drawings And The Directions Of Engineer- In - Charge .(Glazing And Paneling To Be Paid For Separately).For Shutters Builtup Standard Tubular Sections Of Openable Doors ,Windows & Ventilators Including Providing & Fixing Hinges / Rollers Etc. And Making Provision For Fixing Of Fittings Wherever Required (Lockes Shall Be Paid For Separately). Powder Coating Aluminum ( Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Is : 6315 Marked, For Doors Including Cost Of Cutting Floors As Required, Embedding In Floors And Cover Plates With Brass Pivot And Single Piece M.S. With Stainless Steel Cover Plate , Providing And Fixing Glazing In Aluminium Door, Window ,Ventilator Shutters And Partitions Etc. With Pvs / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge.(Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item.)With Float Glass Panes Of 5.0 Mm Thickness ( Weight Not Less Than 13.50 Kg/Sqm) , Providing And Fixing Expanded Grill Made Of Aluminum As Per Design And Drawing Having Members Section Of Size 7.5Mm X 6.0Mm And Opening Of Size 102Mm X 99Mm To Aluminum Window/Vent With Required Screws, Y And H Aluminium Sec (As Per Drawing) At The Ends And Middle Joints Respectively Complete In All Respect As Per Direction Of Engineer In Charge.Powder Coating Aluminum ( Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing 12 Mm Thick Prelaminated Three Layer Medium Density (Exterior Grade ) Particle Board Grade I, Type Ii Conforming To Is : 12823 Bonded Formaldehyde Synthetic Resin ,Of Approved Brand And Manufacture In Paneling Fixed In Aluminium Doors ,Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Direction Of Engineer-In-Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side. , Providing And Fixing Curtain Rods Of 1.25 Mm Thick Chromium Plated Brass Plate, With Two Chromium Plated Brass Brackets Fixed With C.P. Brass Screws And Wooden Plugs, Etc., Wherever Necessary Complete: 20 Mm , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth Side Of Foundation Etc. In Layers Not Exceeding 20 Cm. In Depth, Consolidating Each Deposited Layer By Ramming And Watering Including Lead Up To 50 Meter And With All Lift. , Carriage Of Earth Incloding Loading ,Unloading Without Stacking With Lea Of 5Km , Making Grooves As Per Design In Plaster 10Mm To 20Mm Wide. , Extra For Plastering Done On Moulding Cornices Or Architraves Including Neat Finish To Line And Level: In Two Coats , Providing & Fixing Uv Stabilised Fiberglass Reinforced Plastic Sheet Roofing Upto Any Pitch Including Fixing With Polymer Coated ‘J Or ‘L Hooks, Bolts & Nuts 8Mm Dia. G.I Plain/Bitumen Washers Complete But Excluding The Cost Of Purlins, Rafters, Trusses Etc. The Sheets Shall Be Manufactured Out Of 2400 Tex Panel Rovigs Incorporating Minimum 0.3% Ultra-Voilet Stabiliser In Resin System Under Approximately 2400 Psi And Hot Cured. They Shall Be Of Uniform Pigmentation And Thickness Without Air Pockets And Shall Confoim To Is 10192 And Is 12866.The Sheets Shall Be Opaque Or Translucent, Clear Or Pigmented, Textured Or Smooth As Specified.5.0Mm Thick (Wt. 8.4 Kg./Mtr. Sq.) , Providing Gola 75X75 Mm In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone Aggregate 10Mm And Down Gauge) Including Finishing With Cement Mortar 1:3 (1 Cement : 3 Fine Sand) As Per Standard Design : , Crazy Marble Stone Flooring 20Mm Thick Marble Stone With Black Or Of Specified Colour Topping Including Filling The Gaps With Cement Marble Chips Mix In Proportion Of 4 : 7 (4Cement : 7 White Black Or White Or Black Marble Chips) Size From 1Mm To 4Mm By Volume And Under Layer Of 25Mm Thick Cement Concrete [1:2:4, Graded Stone Aggregate 12.5Mm Nominal Size] Rubbing And Polishing And Cement Slurry Etc. Complete : In Ordinary Cement. , Extra In Marble/Other Flooring Work For Upto 50 Mm Wide Strip Of Green/White/ Jaisalmer Stone In Flooring Work As Per Direction Of Engineer In Charge , Providing & Fixing Precast Cement Concrete Coping 1 : 2 : 4 Mix 50Mm Thick Complete As Per Specification : , Renewing Glass Panes,With Putty And Nails Wherever Necessary Float Glass Panes Of Thickness 5 Mm , Filling Of Sunk Portion Of Roof With Earthen Pots Of Required Height Including Filling Voids With 1:3:6 Light Concrete, Using Brick Bats Complete Levelling And Dressing The Surface By 50Mm Thick Cement Concrete 1:2:4 As Per Specification. , Supply And Fixing In Cement Mortar Welded Hand Railing Made Out Of Ms Round Or Square Bars, Flats Etc. For Staircase Or Verandah As Per Design Complete In All Respect (Wooden Or Pvc Hand Railing To Be Paid Extra) With Priming Coat Of Red Oxide. , Extra For Providing D Type Pipe Head As Top Of Hand Railing , Providing And Fixing Almirah Lock (50 To 70 Mm Size )Of Approved Make Without Pair Of Handles For Door With Necessary Screws Etc Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing Stainless Steel Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Grade 304 , Lettering With Black Japan Paint Of Approved Brand And Manufacture. , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Tractor Mount Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Morth Specification Clause 401..For Grading Iii Material , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300-1 And 300-2 With A Lead Upto 5.00Km As Per Morth Specification Clause 305.3 , Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mixer (Pug Mill), Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers In Sub-Base/Base Course On A Well Prepared Sub-Base And Compacting With Smooth Wheel Roller Of 80 To 100Kn Weight To Achieve The Desired Density Including Lighting, Barricading And Maintenance Of Diversion, Etc As Per Tables 400-12 & 400-13 And Morth Specification Clause 406.By Mechanical Means With All Lead , Providing And Laying Of Interlocking M-30 Grade Concrete Block Pavements Having Thickness 80 Mm As Per Drawings And As Per Is 15658:2006.And All Materials Shall Conform To Morth Specification Clause 602.With M-30 Grade 0.30 Mtr X 0.30 Mtr X 0.15 Mtr Edge Blockscategory B : Dentated Only Two Side Like I,Z,T Shape As Per Irc:Sp:63-2004 , Construction Of Tube-Well From Ground Levels And Upto 100 Meter Depth And Above To Accommodate Housing And Assembly Pipe Of Following Sizes In All Types Of Alluvium Strata By Percussion/ Rotary Drilling Method And With Gravel As Per Is:4097-1967 And Packing As Per Is:2800 (Part I -& Ii) 1979 As Amended Upto Date (The Work Includes The Cost Of Gravel & Its Primary Packing And Packing During Development, Lowering Of Housing & Strainer Assembly Pipes, With Supply And Wrapping Of Coir-Rope, Wherever Necessary, For Arresting Fine Sand Particles. The Work Will Not Include Cost Of Housing Pipe And Strainer Pipe Assembly And Development Work, But Work Would Be Completed After Obtaining Sand Free Water).200Mm Dia. Nominal Bore. , Construction Of Tube-Well Upto 100 Meter Depth And Above In All Type Of Rocks By Dth System And Over Burden, To Accommodate Casing Pipe Of Following Sizes In All Types Of Soils And Over Burden Including Lowering Of Casing Pipes, But Excluding Cost Of Casing Pipes As Per Is : 2800 (Part I & Ii) 1979 Specifications. The Work Would Be Completed After Obtaining Sand Free Water. The Tube Well Should Have A Throughout Bore As Per Nominal Dia Of Casing Pipe: 200Mm Dia. , Supply Of Strainer Pipes Made Of Erw M.S. Black Pipe Isi Mark Of Following Sizes At The Site Of Work Including Required Size Of Slotting As Per Is:8110-1985. 200Mm Normianl Bore , Supply Of Erw M.S. Black Casing Pipe Isi Marked Is:4270/ 1992) Of Grade Fe410 Of Following Sizes At Site Of Work. 200Mm Normianl Bore , Development Of Tube Well As Per Is Specification Using Suitable Compressor To Give Sand Free Water For Required Yield Of The Gravel Packed Tube Well. , S & F Tube Well Cover Of M.S.Sheet (6Mm Thick) With Nuts And Bolts Complete For Casing Size:200Mm Dia. , S & F M.S. Clamp, Set Of 50 ×6Mm Flat Iron With Nuts And Bolts Etc. For Holding The Riser Pipe Assembly Of Submersible Pump Set. , P & F Indian Type White Glazed Vitreous China 1St Quality W.C. Orissa Pan (Is :2556 Mark) With 100 Mm Vitreous China P Or S Trap Including Cutting And Making Good The Wall And Floor: Size 580X440mm. , P & F European Type White Glazed Vitreous China 1St Quality Double Syphonic W.C (Is :2556 Mark) With P Or S Trap Including Cutting And Making Good The Wall And Floor , P & F Water Closet Seat Covers With Brass Hinges Complete :Solid Pvc (Is 2548 Marked) Grade-I Black For Ewc. , P & F Low Level Flushing Cistern Of 10 Litres Capacity (Is : 2556 Mark) Of Approved Make With Complete Fittings C.I. Brackets Duly Painted, Brass Ball Cock With Ball (Is: 1703 Mark) Complete Including Cutting And Making Good The Wall: Pvc With Pvc Bend And Superior Internal Fittings As Per Is : 7231 . , P & F Flush Pipe Of Approved Make With Complete Fittings For High Level Flushing Cistern: Pvc Exposed (Heavy) 32Mm. , P & F Wvc Wash Basin (Ist Quality Is:2556 Mark) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock (Is:8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make, P.V.C Waste Pipe With Pvc Nut 32 Mm Complete Including Cutting & Making Good The Wall : , Size 580 Mm X 450 Mm , Size 630 Mm X 500 Mm Dia For Counter Top , P & F Bevelled Edge Mirror/Mirror With Teak Wood Lipping Around Of Special Glass Of Approved Make As Per Direction Of Engineer-In-Charge Complete With 6Mm Thick Commercial Ply Base Fixed To Wooden Screws & Washers. Size 600 X 450Mm X 4 Mm Thick , P & F Towel Rail Or Ring Of Approved Quality/Make: , C.P. Brass Towel Rail Elbow Type With Concealed Screws Size 450Mm (Heavy Duty). , P & F Grating Of Approved Quality/Make: , Stainless Steel Sheet Size 125Mm Dia. , P & F Liquid Soap Container With Brackets Complete Of Approved Make: , P & F Jet Spray For Water Closet With C.P. Copper Tube Flange Of Approved Make. , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes (Is 15778 : 2007 Code) Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1 Metre Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Internal Work Exposed On Wall) , 20 Mm Nominal Outer Dia Pipes , 25 Mm Nominal Outer Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes (Is 15778 : 2007 Code) Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Concealed Work Including Cutting Chases And Making Good The Walls Etc.,) , 20 Mm Nominal Outer Dia Pipes , 25 Mm Nominal Outer Dia Pipes , Making Connection Of G.I. Distribution Branch With G.I. Main Including All Fitting. , Upto 25Mm Dia , P & F Bib Cock (Is : 8931 Mark), Superior Quality Of Approved Make: , C.P. Brass Bib Cock,15Mm Nominal Bore. , C.P. Brass Bib Cock Long Body, 15Mm Nominal Bore Weight Not Less Than 690 Gm , P & F Ball Cock (Is :1703 Mark) With Rod & P.V.C. Ball Complete : Brass Wt. Not Less Than 300 Gm,15Mm. , P & F Inlet Connection (Angle Valves) Superior Quality, Of Approved Make, For Wash Basin, Gyser Etc. C.P. Inlet Connection 15Mm.Brass (Is : 8931 Marked) , P & F 15 Mm. Dia Connection Pipe Of Approved Quality/Make : Pvc Pipe With C.P. Brass Nuts Upto Length 450Mm. , P & F Full-Way Valve (Is:778 Mark) Or Wheel Valve Of Approved Make : , Gun-Metal 15Mm Nominal Bore. , Gun-Metal 25Mm Nominal Bore. , P & F Pvc Storage Tank Isi Marked (Is : 12701) Indicating The Bis License No), Of Approved Make With Cover, 25Mm Dia 1M Long G.I. Over-Flow Pipe & 25 Cm. Long Wash Out Pipe With Plug & Socket, Including Making Connection Etc., Complete Of Approved Design: 1000 Litres Capacity , P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 160 Mm Dia , P & F S.W. Master Trap (Inter-Cepting) A Grade (I.S.: 651 Marked) Of Approved Quality/Make 150Mm Dia , P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia , P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: 110Mm Dia , Coupler (Socket) , Plain Tee , Bend 45 , Vent Cowel , Pipe Clip , Multi Floor Trap , Construction Of Manhole In All Type Of Soil Inner Size 90 X 60 Cm. 300 Mm Thick Masonry In Cm 1:6, 10 Cm. Thick Cement Concrete 1:5:10 In Foundation, 20 Mm Thick Inside Plaster In Cm 1:6, Finished With Floating Neat Cement, 50Mm Thick M-15 Grade cement concrete Flooring, Making Channels, 80Mm Thick Stone Slab Covering With 40Mm Thick M-15 Grade cement concrete Flooring, Cement Cover With Frame Of 450Mm Dia, Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within 50 Mtr. Lead. Depth Up To 0.5 M , Construction Of Chamber In All Type Of Soil With 300 Mm Thick Masonry In Cm 1:6 M,10 Cm Thick cement concrete 1:5:10 In Foundation, 20Mm Thick Insider Plaster In Cm 1:6, Finished With Floating Neat Cement, 50Mm Thick M-15 Grade cement concrete Flooring , Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr. -Do- Size 600 X 450Mm Depth Upto 0.5 M Cement Cover With Frame. , Construction Of Septic Tank In All Types Of Soil With 40 Cm .Thick Masonry In Cm 1:6, 15 Cm Thick cement concrete Bed Of 1:5:10, M-15 Grade cement concrete Floor & Reinforced Cement Concrete Slab Covering With M15 Grade cement concrete Floor, 50 Mm Thick Stone Slab Partition Walls, 20 Mm Thick Plaster In Cm 1:6 Finished With Neat Floating Cement, 4 Nos Stone Foot Rests Of Approved Design ,Two No. 450 Mm Dia Each Ferro Cement Cover With Frame, Earth Work Etc. Complete As Per Approved Drawing Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr:- Size 400 X140x150 Cm.(For 50 Users) With 115 Mm Thick Reinforced Cement Concrete (M-20) Slab With Tor Steel Reinforcement 10Mm Φ @15 Cm C/C Bothways Including Shuttering Complete In All Respect. , Construction Of Recharge Shaft In Filter Pit Including Earth Work Excavation , Lifting Excavted Earth With All Lift And 50 M Lead And Centering & Shuttering Evenever Required.Diameter 900 Mm , Supply & Fixing Pre-Cast Reinforced Cement Concrete Rinngs At The Mouth Of Recharge Shaft Of M20 Mix With 40 Mm Thicknessdiameter 900 Mm , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter. All Kinds Of Soils , Add Extra For Foundation/Trenches/Drains For Every Additional Lift Of 1.5 Mtr. Or Part Thereof In All Kinds Of Soil , Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M10 Grade Nominal Mix 1: 3: 6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). , Random Rubble Stone Masonry For With Hard Stone In Foundation And Plinth In Cement Sand Mortar Above 30 Cm Thick Wall In:Cement Mortar 1:6 ( 1-Cement : 6-Sand). , Plaster On New Surface On Walls In Cement Sand Mortar 1:4 Including Racking Of Joints Etc. Complete Fine Finish :20Mm Thick . , Finishing With Neat Cement (Punning). , Providing And Laying In Position Specified Grade Of Cement Concrete For Reinforced Cement Concrete Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement For Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases Etc. M20 Grade Nominal Mix / Design Mix. , Add Extra For Providing Richer Mixes Respectively At All Floor Levels, Providing M-25 Grade Concrete By Using Min 410 Kg Of Cement Per Cum Instead Of M-20 Grade Design Mix. , Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Props And Removal Of Formwork For Upto Floor Five Level For : Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands, Coping Bed Plates, Anchor Blocks, Sills, Chhajjas, Lintel, Beam, Plinth Beam Etc. , Providing And Fabricating Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding (Including Cost Of Binding Wire) All Complete Up To Floor Five Level. Thermo-Mechanically Treated Bars (Conforming Of Relevent Is Code). , Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement Including Cement Slurry, Making Of Lines Or Groove Etc Complete But Excluding The Cost Of Nosing Of Steps Etc. Complete. 75Mm Thick With 20Mm Thick Nominal Size Aggregate. , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting (Height Upto 10 M) , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete: , Inside Size 600X450mm Upto Depth Of 0.5M & 38Kg Ci Cover With Frame , 250Mm Dia Internal. , P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii(4 Kg. /Cm.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant, 160Mm Dia. , 250Mm Dia S.W. Pipe. , P & F 60 Cm. Wide M.S. Ladder In Open Well Made Of Flat Iron 32X5mm And 10Mm Dia Bars @ 200Mm C/C With Angle Iron Hold Fasts At Suitable Interval Complete As Per Drawing. , Construction Of Tube-Well From Ground Levels And Upto 100 Meter Depth And Above To Accommodate Housing And Assembly Pipe Of Following Sizes In All Types Of Alluvium Strata By Percussion/ Rotary Drilling Method And With Gravel As Per Is:4097-1967 And Packing As Per Is:2800 (Part I -& Ii) 1979 As Amended Upto Date (The Work Includes The Cost Of Gravel & Its Primary Packing And Packing During Development, Lowering Of Housing & Strainer Assembly Pipes, With Supply And Wrapping Of Coir-Rope, Wherever Necessary, For Arresting Fine Sand Particles. The Work Will Not Include Cost Of Housing Pipe And Strainer Pipe Assembly And Development Work, But Work Would Be Completed After Obtaining Sand Free Water).200Mm Nominal Bore , P & F G.I. Pipes (Internal Work) With G.I. Fittings (Is:1239-1992 Mark) & M.S. Clamps Including Cutting And Making Good The Walls And Floors : Exposed On Wall, 15 Mm Dia Nominal Bore. B - Class. , Supply Of Strainer Pipes Made Of Erw M.S. Black Pipe Isi Mark Of Following Sizes At The Site Of Work Including Required Size Of Slotting As Per Is:8110-1985. , Size 9 To 12 Mm , Size 3 To 5 Mm , Wiring Of Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Virgin Material Pvc Conduit & Its Isi Marked (Is:3419-1988) Accessories, Round Tiles, 1.2 Mm Thick Hot Dipped Galvanized Modular Box With Earth Terminal, 10A Modular Switch,Modular Face Plate With Grid Plate, 3 Pin Ceiling Rose / Holder /3 Way Connector, Screws, Making Connections, Testing Etc. As Required. For Specification Of Copper Conductor, Phenolic Laminated Sheets & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 For Additional Technical Parameters Of Product / Work Refer Annexure A Attached. , Short Point (Up To 3 Mtr.) , Medium Point (Up To 6 Mtr.) , Long Point (Up To 10 Mtr.) , Wiring Of Twin Control Light Point With 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Pvc Conduit & Its Isi Marked (Is:3419-1988) Accessories, Round Tiles, 2 Nos Hot Dipped Galvanized M.S Modular Box Of 1.2 Mm Thick With Earth Terminal,2 Nos10 A Two Way Modular Switch, 3 Pin Ceiling Rose / Holder / 3 Way Connector ,Modular Face Plate With Grid Plate, Screws, Making Connections, Testing Etc. As Required. For Specification Of Copper Conductor, Phenolic Laminated Sheets & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , Medium Point (Up To 6 Mtr.) , Long Point (Up To 10 Mtr..) , Wiring Of 3/5 Pin 6 Amp. Light Plug Point With 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade(Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Pvc Conduit & Its Isi Marked (Is:3419-1988)Accessories, Hot Dipped Galvanized Modular Box Of 1.2 Mm Thick With Earth Terminal, 10 A Modular Switch, 3/5 Pin 6 A Modular Socket, Modular Face Plate With Grid Plate, Screws, Making Connections, Testing Etc. As Required. For Specification Of Copper Conductor, Phenolic Laminated Sheets & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 For Additional Technical Parameters Of Product / Work Refer Annexure A Attached. , On Board , Short Point (Up To 3 Mtr.) , Medium Point (Up To 6 Mtr.) , S&F Following Sizes (Dia.) Of Isi Marked Virgin Material Mms ( Is:9537 P - Iii ) Pvc Conduit Along With Isi Marked (Is:3419-1988) Accessories As Required In Recess Including Cutting The Wall, Covering Conduit And Making Good The Same As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , 25 Mm , 32 Mm , Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Class 5 Stranding In Acc. To Is:8130/Iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/C/D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, In Existing Surface Or Recessed Pvc/ Ms Conduit/Casing Capping Making Connections With Copper Lugs Of Suitable Size, Ferrules,Testing Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , 2X 1.5 Sq.Mm , 2 X 2.5 Sq. Mm. + 1X1.5Sqmm , 2 X 4.0 Sq. Mm. + 1 X 2.5 Sq. Mm. , 4 X 10.0 Sq.Mm , 4 X 16.0 Sq.Mm , Supplying And Fixing Of Power Plug Point With Modular Accessories As Per Pwd Specification For Electrical Works, On Hot Dipped Galvanized Modular Box Of 1.2 Mm Thick With Earthing Terminal/Connector On Surface Or In Recessed With Suitable Size Of Modular Face Place With Grid Plate And Cover Plate Including Cost Of Isi Marked Modular 16 Amp. Switch (Is :3854) And 6/16 Amp. Socket Outlet (Is:1293) Making Connection , Testing , Etc. As Required. For Specification Of Wiring Accessories Refer Chapter E - 07 Related Item & For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , Providing & Fixing Of Wiring Accessories Oem Fabricated Following Size Gi Box Of 1.2 Mm Thick With Earthing Terminal And Adjustable Floating Clamp In Recess/ Surface Suitable For Modular Accessories As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 1/2 Module , Providing & Fixing Of Following Size Mounting Grid Plates With Cover Plates Made From Fire Retardent Uv Established High Performance Engineering Plastic Suitable For All Universal Metal Boxes For Front Installation & Removal Direct Fit Type Complete In All Respect.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 1-2 Module , Providing & Fixing Of 240/415 V Ac Mcb With Positive Isolation Of 10 Ka Breaking Capacity (B/ C/D Tripping Characteristic As Per Type Of Load And Site Requirement) 4 Kv Impulse Withstand Voltage, Isi Marked Is 8828(1996) / Conforming To Iec 60898-1 2002, Iec 60947-2, Low Watt Losses, Trip Free Mechanisum , Energy Limiting Of Class 3 As Per Iec, Minimum Phase Termination Capacity Of 35Sq.Mm. , Conductor Line Load Reversibility , Ip 20 Contact Protection And Fitted In Existing Distribution Board/Sheets, Minimum Electrical Operation 20,000 Upto 20 A Rating And 10,000 Upto 63 A, 5000 For 80 A & Above Rating Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached. , Single Pole Mcb (With B/C Curve Tripping Characteristics) , 6 A To 32 A Rating , Providing & Fixing Of Recessed/Surface Mounting Heavy Duty Horizontal Type Double Door ( Metal / Glazed )Distribution Board With Metal End Box Made Out From Galvanized Steel / Crca Sheet Not Less Then 1.2 Mm Thick Conforming To Is-8623-1 & 3 / Iec 61439- 1 & 3, Powder Painted Complete With Reversible Door (For Double Door Db Only )100 Amp. Insulated Copper Bus Bar/Shorting Link , Copper Neutral Link, Copper Earth Link , Color Coded Interconnecting Wire Set Of Suitable Rating And Din Bar,Masking Sheet, Making Internal Db Terminations With Copper Lugs, Ferrules, Detachable Gland Plate, Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , Metal Door (Three Phase) Ik-09 And Ip-43 With Metal End Box , 6 Way , Providing & Fixing Of Recessed/Surface Mounting Heavy Duty Vertical Tpn Distribution Board With Metal End Box With Provision Of Incomer Suitable For Mcb / Rccb And Sp / Tp Mcb As Outgoing ,Made Out From Galvanized Steel / Crca Sheet Not Less Then 1.2 Mm Thick Conforming To Is-8623-1 & 3 / Iec 61439- 1 & 3. Powder Painted With Reversible Door (For Double Door Db Only ) Complete With Insulated 100 A Rating Copper Bus Bar, Neutral Bars With Shrouds, Earth Bar , Color Coded Interconnecting Wire Set Of Suitable Rating And Din Bar,Masking Sheet, Making Internal Db Terminations With Copper Lugs, Ferrules, Detachable Gland Plate, Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , Double Door Ik-09 & Ip-43 With Metal End Box , 6 Way(8+18) , Providing & Fixing Of 240/415 V Isolator Isi Marked Is:13947-Iii/Conforming To Iec 60947-3, Suitable For Ac22a Utilization Category, 4Kv Impulse Withstand Voltage, True Contact Indication, Red Colour Dolly / Lever Shall Have Single Mould Covering Over All Poles For Operation , Two Position Din Rail Mounting, Minimum Phase Termination Capacity Of 35Sq.Mm. Ip 20 Contact Protection And Fitted In Existing Distribution Board / Sheet Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , Four Pole Isolator , 80 A/ 100 A Rating , Triple Pole Isolator , 63A Rating , Providing & Fixing Of Following Modular Accessories As Per Pwd Specification For Electrical Works, Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including All As Per Pre Approved By Engineer In Charge,Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , 25 Amp. 2 Module Motor Starter With On / Off Push Button , Blanking Plate , Providing & Fixing Of Modular Type 120 W Step Fan Regulator Duly Isi Marked (Is 11037:1984 ) With Cm/L No. Printed Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including All As Per Pre Approved By Engineer In Charge,Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , 5 Step Fan Regulator 2 Module 360 Dgree Rotating , Providing & Fixing Of Modular Type Switch/ Bell Push Duly Isi Marked (Is :3854) With Cm/L No. Printed And Made Out Of Unbreakable And Fire Retardant Vergin Uv Stabilized Polycarbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating ,Minimum Width Of Switch Toggle( Push Part ) Should Not Less Then 20Mm, Including All As Per Pre Approved By Engineer In Charge,Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , 10 A Bell Push , Providing & Fixing Of Ding Dong/Musical Chime Bell As Per Pwd Specification For Electrical Works, Including Making Connection Testing Etc. As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , Supply Installation Testing and Commissioning of 3 /4 Pole Current Limiting Moulded Case Circuit Breaker (Mccb) Made Of Flame Retardent & Heat Resistant Material Having Following Current Rating, Short Circuit Breaking Capacity At 440/415 V, 50 Hz; O/L & S/C Settings , Conforming To Is/Iec 60947 P -2 :2003 With Front Face And Centralised Adjustable, Trip Free Mechanisum, True Contact Position Indicator, Line Load Interchangeability, Designed For Both Horizontal & Vertical Mounting Without Any Adverse Effect On Electrical Performance, Suitable For Operation Upto 55 Degree And Without Derating Upto 40 Degree, Pollution Degree 3, Having Positive Isolation Capability, Push (Test) To Trip, Trip Time Less Then 10 Ms Under S/C Condition, Breaking Capacity Ics = 100% Icu. U Improvement =8 Kv, Rated Insulation Voltage 690 V. Provision For Uvr , Shunt Trip , Earth Fault Trip, Door Interlock, Pad Lock & Rotary Handle , Including Making Connections Etc. As Required.Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Certificate Before Execution All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached. , 3 Pole Mccb With Thermal Magnetic Release , Up To 100 annual periodical maintenance , 25 Ka, Adjustable O/L & Adjustable S/C Setting, , Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Arrmoured Aluminium Cable Confirming To Is:1554 P-I / Is :7098 P - I Of 1.1 Kv With H4- Grade Electrolytic Aluminium Conductor Confirming To Is 8130 Of Purity 99.6 %, Round / Flat Strip Armouring Of Cables, Inner / Outer Sheath Confirming To Is:5831 In Existing Reinforced Cement Concrete / Hume / Stoneware / Pvc Pipe/ Open Duct/Cable Trench / Cable Tray(With Cable Tie) Including Testing Etc. As Required Of Following Size. Oem Must Have Its Own In House Nabl Accrediated Laboratory For Testing Procedure As Per Is:10810.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached . , 35.0 Sq. Mm , 3.5 Core , Add Extra For Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Direct In Ground Including Excavation Of Trench Of Size 75 Cm (Depth) X 35 Cm(Width) , With Procedure As Per Following Points:- (A) Make A River Sand Bed Of Height 125 Mm Along The Trench, (B) Lay The Cable In The Middle Of The Trench, (C) Provide River Sand Bed Of Height 125 Mm On Top Of The Cable, (D) Lay The Protective Common Burnt Clay F.P.S. Bricks Of Class Designation 75 / Sand Stone Slabs Of 50 Mm Thickness And 225 Mm Wide Just Above The Sand Bed Vertically Across The Cable ( Approx. 9 No. Bricks Per Mtr.), (E) Backfill The Excavated Soil Leaving 300 Mm From The Ground Level, (F)Lay The Cable Warning Tape And Again Back-Fill The Remaining Portion Of The Trench Upto The Ground Level And Compacting The Earth , Supplying And Making End Termination With Heavy Aluminium Lugs ( Pin / Ring Type ) Confirming To Is 8309 -1993 & Is 8337-1976 Duly Crimped With Crimping Tool, Pvc Tape Etc Of Following Size.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 35.0 Sq.Mm , P / L Of Double Wall Corrugated Hdpe Pipe Confirming To Is : 16205 P-24, Stiffness Class 750 N, Externally Corrugated And Having Smooth Surface Inside With Hdpe Coupler, Elbow, Tee At Required Depth Below The Ground For Laying Cable Of Following Nominal Outer Dia. Mfr Test Report From Nabl Accrediated Is To Be Submitted.(Excavation Of Earth & Back Filling With Compaction Is To Be Paid Extra)All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 50 Mm , Labour Charges For Excavating Trenches Of Required Width For Pipes Dressing Of Sides, Ramming Of Bottoms, Depth Up To 1.5 Mtr. Including Taking Out The Excavated Soil, And Then Returning The Soil As Required In Layers Not Exceeding 20Cm In Depth Including Consolidating Each Deposited Layer By Ramming, Watering Etc. And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 Mtr.: , All Kind Of Soils , Providing & Fixing Of Bee Star Rated Copper Wounded Double Ball Bearing Capacitor Start, Aluminium Body & Metallic Blade Ceiling Fan Conforming To All The Performance Requirements Laid Down In Is 374:2019 Including All Amendments, As Applicable ; & Carry Bis Licensing (I.E. Isi Marking) With Down Rod Up To 80 Cm With Secondary Support Safety Cable ( Steel Rope) , Cotter Pin With 3 X 1.5 Sq.Mm Pvc Insulated Flexible Copper Conductor Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 1200 Mm Sweep Bee 1 Star Rated (Service Value =4.0 To 4.5 ) , P & F 1.2Mm Thick M.S. Recessed Fan Box, Hexagonal/ Round Of Size 130 Mm Dia, Depth 75Mm, 12 Mm Dia Rod Fan Hook With 100 Mm Length Extended On Each Side . All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached. , Providing & Fixing Of Of Double Ball Bearing, Copper Wounded Capacitor Start Single Phase Metallic Blade Fresh Air Fan, In Existing Opening Including Cost Of Hardware , Flexible 3 Core Copper Conductor ,Making Connections, Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 300 Mm Sweep , P & F Of Gravity Louver Shutter Of Superior Quality Made Out Of Frame Of 18 Swg M.S. Sheet & Louvers Made From 24 Swg Ms Sheet With Enamel Paint Including Cost Of Nuts, Bolts, Etc As Reqd. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , Up To 380 Mm Size , Providing & Fixing Of Energy Efficient Direct Fit (Retrofit) Polycarbonate/ Glass Housing Smd Mid Power Led Tube Rod (With Integral Driver & Alumn. Heat Sink ), On Existing Fixture. System Lumen Efficacy ≥ 100 Lm/Watt Output, Internal Surge Protection Of 2.5 Kv ,Thd 20% ,P.F.≥0.95,Cri 80 , Life Time Of Minimum 35000 Burning Hours With , 70% Of Intial Lumen Maintaned Till Life Ends , Cct 3000°K / 4000°K / 5700°K /6000°K/6500°K (As Per Ansi Bin) , Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79 & Lm80)Certificate / Report From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 1200Mm , Min. Lumens Output 2000 Lm Led Tube Rod With Polycarbonate Housing , Providing & Fixing Of Ip20, 2X2 Led Surface/ Recessed Mounting Mid Power Smd Type Led Light Fixture Not Less Than 50Mm Housing Depth Made From Crca Sheet Steel Housing, High Purity / Transmisivity Uv Stabilized Non -Yellowish Diffuser For Uniform Light Distribution. High Efficiency With 4 Kv Internal/External Surge Protection Bis Certified Isolated Driver Having Efficiency 85% , With Short & Open Circuit Protection (Integral With Light Fixture). System Lumen Efficacy Of ≥ 120 Lm/Watt ,Thd 10 % , P.F.≥0.95,Cri 80 , Life Time Of Minimum 50000 Burning Hours With , 70% Of Intial Lumen Maintaned Till Life Ends , Cct 3000°K / 4000°K / 5700°K /6000°K/6500°K (As Per Ansi Bin) , Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. , Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79 & Lm80) Certificate / Report From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , Surface Moutning , Minimum Lumen Output 3600 Lm , Providing & Fixing Of Ip-20 Led Recessed / Surface Mounted, Round / Sqaure Smd Mid Power Led Downlight With Power Coated Die-Cast Aluminum Housing With Uv Stabilized Non Yellowish Diffuser With Bis Complience 2.5 Kv Surge Protected Isolated Driver, With Short & Open Circuit Protection, Having Efficiency 85% . System Lumen Efficacy Of ≥ 110 Lm / Watt, Thd 10 % , Pf.≥0.95, Cri 80, Life Time Of Minimum 50000 Burning Hours With , 70% Of Intial Lumen Maintaned Till Life Ends , Cct 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As Per Ansi Bin) , Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. , Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79 & Lm80) Certificate / Report From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , Surface Mounting (With Extruded Alumn. Housing ) , Minimum Lumen Output 1300 Lm , Minimum Lumen Output 1950 Lm , Plate Earthing As Per Is:3043 With Hot Dipped G.I. Earth Plate Of Size 600Mm X 600Mm X 6.0Mm By Embodying 3 To 4 Mtr. Below The Ground Level With 20 Mm Dia. G.I. B Class Watering Pipe ,Including All Accessories Like Nut, Bolts, Reducer, Nipple, Wire Meshed Funnel, And Heavy Duty Weather Proof Poly-Propylene Earth Pit Chamber With Lockable Jam Free Lid Suitable For Safe Working Load 5000 Kg Or More Of Size Top Dia. 225 To 260 Mm, Bottom Dia 300 To 350 Mm. And Height 250 To 300 Mm. And Embodying The Pipe Complete With Alternate Layers Salt And Coke/ Charcoal, Testing Of Earth Resistance For Value Of 5 Ohms Or Less As Required & Must Record By Engineer In Charge During Site Visit And Ensure To Enter In Measurment Book.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , Supply & Laying Following Size Earth Wire In Horizontal Or Vertical Run In Ground/Surface/Recess Including Riveting, Soldering, Saddles, Making Connection With Gi/Cu Purity Purity 95% Thimble Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached. , 8 Swg G.I. ( Hot Dipped ) Wire , Providing & Fixing Of Ik08, Ip 66 Protected Led Street Light Luminaire On Existing Bracket/Pole. Fixture Made Of Powder Coated Single Piece Pressure Die Cast Aluminum Material With Heat Dissipation Fins On Housing With Uv Stabilized Pc (Uv Stablization Report Submitted For Uv Cover ) /Toughened Glass Cover And Secondary Lens On Each Led & Should Be Smd Type Of 3 To 5 Watt Each . The System Efficacy =125 Lm/ Wt And Potted Driver & Has A Unique Bis R Number With Input Voltage Ac 120 To 270 V Ac With High Voltage Cutoff @=300 V Ac And Auto Resetting Safety , Power Factor 0.95 Driver Efficiency 85% ,Thd(I) 10% Humidity 10% To 90% Rh Working Temp -5C To 45C . Driver Current 750Ma. The Luminaire Shall Be Bis Certified And Trade Mark Certified. Life Expectancy Equal Or More Than 50000 Burning Hrs With Minimum 70% Lumen Maintened , Cri 70 And Cct 5700K +355K. Surge Protection Shall Be Min ≥ 4 Kv Internal And Min 10 Kv External Inside Driver Compartment. Driver Should Be Phase To Phase Protection Of 440 V For 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing On Die Cast Housing To Allow Traceability/Authenticity. Fixture Shall Be As Per Is 10322 Complianced.Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79/Lm80) Certificate/ Report With Liable Warranty Of Product/Accessories From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , Led Street Light Fixture With Minimum Lumen Output 12500 Lm , Providing & Fixing Of Street Light Bracket Made Out From Following Size Of B Class , Medium Class G.I. Pipe Confirming To Is : 1239 P - 1 ( 2004 ) With Heavy Duty Pole Clamp, Saddles Suitable Fastners Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 32 Mm Dia. , Supply Installation Testing and Commissioning of Mnre Approved & Confirming To Is:12933 P-1,2,3 & 5 Flat Plate Collector Type Solar Hot Water System Having Collector With Zincalum Sheet Outer Body , Glass - Line / Titanium Enamel Coated Inner Tank With Metal Rust Proof Puf Insulated Body Including Electrical Back Up, Thermostat, Powder Coated / Hot Dipped Galvanized Ms Stand For Collector & Tank Etc. As Required. Of Following Capacity Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 250 Litre/ Day , Supply , Installation, Testing And Comissioning Of Is:1475 Marked Self Contained Drinking Water Cooler With Hermetically Sealed Compressor,Non Cfc Refrigerent Suitable For Operation On 230V/1Ph/50Hz Ac Supply,Full Stainless Steel (Ss304)Body (0.8 Mm Thick) And Tank (0.5 Mm Thick) , Stainless Steel Water Tray,Minimum Two Nos Brass Chrome Plated Faucets And Suitable Drainage System Complete In All Respect With Required Height Ms Fabricated And Painted Angle Iron Frame ( Cost Of Frame To Be Paid Extra )Complete In All Respect Of The Following Capacity. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , Cooling Capacity 150 Ltr./Hr. And Storage Capacity 150 Ltrs , Supply, Fixing And Testing Of Following Capacity Iso Certified Company Made Wall Mounted Stabilizer Having Output Voltage Variation From 200 V To 250 V(+/-5%) With Input Voltage Variation From 170 V To 260 V, Time Delay Facility From 2 To 4 Minute And High Cutoff At 270 V With Providing Of 16 annual periodical maintenance /20 annual periodical maintenance Industrial Plug Top Making Connection Etc Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 4 Kva , Making Hole In Stone Masonary/ Reinforced Cement Concrete Wall/ Reinforced Cement Concrete Slab With Core Cutter For Accomodating Refrigerant Pipe/ Drain Pipe/ Ms Pipe/ Cables Etc Of Following Dia , 50 Mm Dia Per Running Inch Length , Supply , Installation, Testing And Comissioning Of Inverter Type Air Cooled Hi Wall Split Type Air Conditioners With Latest Star Rating System As Per Bee Amended Upto Date Complete With Indoor Unit(Idu), Out Door Unit (Odu), Surface / Concealed Copper Refrigerant Piping With Insulation (Closed Cell Elastomeric Nitrile Rubber Tubular Pipe Section) Upto 3 Mtr (Idu To Odu), Copper Power Cable Upto 3.5 Mtr (Idu To Odu), R-32/R-410 Green Refrigerant, Wireless Remote Control, Suitable For Working Between 230V +/- 10% With Low & High Voltage Cutoff And 50 Hz , Single Phase Ac Supply Capable Of Performing Cooling, Dehumidification, Air Circulation Of Following Capacity With Scroll / Rotary Compressor. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 1.5 Tr Iseer Not Less Then 3.8 , Supply Installation Testing and Commissioning of Monoblock Motor Pump Set Isi Marked (Is:9079-2002) With Tefc Motor, Motor Should Be Ie2 Class As Per Iec 60034-2-1: 2007, Iec 60034-30: 2008, & Is12615:2011. With Stainless Steel Impellor, Stainless Steel Shaft, Mechanical Seal, Single/Three Phase ( 240 - 440 V ) Permanent Split Capacitor Type (Psc), Fitted With Thermal Overload Protection, Including Cost Of Hardware Etc On Existing Platform Complete. Pump Shall Have Following Hp Rating, Phase, Head, Minimum Discharge Respectively Complete In All Respect. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Certificate Before Execution. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , 2.0 Hp, 3-Ø, (6-27)Mtr, (425-100) Lpm , Supply Installation Testing and Commissioning of Contactor Oem Fabricated Dol/Star-Delta Starter Panel With Switchgear Selection As Per Type-2 Cordinatiom Chart And Made Out From 1.6 Mm Thick Powder Coated Crca Sheet, Enclosure Comprising Of Over Load Protection Relay, Short Circuit & Single Phasing Protection, Illuminated On / Off Push Buttons, Ammeter, Voltmeter, Indicating Lamps Etc. Suitable For Following Rating Motors Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure A Attached . , For Single Phase Submersible / Monoblock Pump , 2.0 Hp To 3.0 Hp (Dol Starter)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Rajasthan View Result →
26.
Housing Urban and Rular Development #10908306 AOC
Providing Basic Amenities And Beautification Of Dargoba Temple Campus, At-Dargoba Mandir, Pare, Tal-Khanapur, Dist-Sangli.-Cubic Metre Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. - (Lift upto 1.5 metre) By Mechanical Means Cubic Metre Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting excetra complete. (upto all leads and lifts) By Mechanical Means Cubic Metre Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork, laying/ pumping, compacting and curing, excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer excetra complete. With fine aggregate (Crushed sand VSI Grade finely washed, excetra) (using ARTIFICIAL SAND). Providing and laying Cast in situ / Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer excetra complete. with fine aggregate (Crushed sand VSI Grade finely washed etc) (using ARTIFICIAL SAND). Providing expansion joints in reinforced cement concrete framed structure (exterior column) with plain premoulded filler 25 milimetre thick with 75 milimetre wide and 1 milimetre thick stainless steel plate and finishing, excetra complete. (For Ground Floor) Providing second class burnt brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailling out water manually, striking joints, on unexposed faces, racking out joints on exposed faces and watering, excetra complete. (using ARTIFICIAL SAND). Providing and laying cast in situ / Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, compaction, roughening if special finish is to be provided and curing excetra completet (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixe excetra complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) (For Ground Floor) (using ARTIFICIAL SAND). Providing and laying cast in situ /Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer excetra complete.With fine aggregate (Crushed sand VSI Grade finely washed etc) (For Ground Floor) (using ARTIFICIAL SAND). Providing and laying cast in situ / Ready Mix cement concrete M-25 of Trap / granite /quartzite/ gneissmetal for reinforced cement concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer excetra complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) (For Ground Floor) using ARTIFICIAL SAND). Providing and laying in situ M-25 cement concrete of trap / granite / quartzite / gneiss metal with 15 percent plum of trap stones for retaining walls and jetty, excetra including necessary formwork, compacting, curing, bailing out water manually in tidal range, excetra complete. Providing and fixing in position thermo mechnically treated FE-500 steel bar reinforcement of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. For Ground Floor) Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundations and plinth of inner walls / in plinth of external walls including bailling out water, striking joints on unexposed faces and watering, excetra complete. (using ARTIFICIAL SAND). Providing and fixing mild steel grill railing weighing 20 kilogram per square metre with polyvinyl chloride handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing polyvinyl chloride handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, excetra complete. (For Ground Floor) Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand / grit, ramming, watering, excetra complete. Filling in plinth and floors with contractors material / brought from outside and approved by Engineer In- Charge, in 15 centimetre to 20 centimetre layers including watering and compaction, excetra complete. Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints on the inside when plastering is to be done, watering and scaffolding, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing and laying rubble stone flooring laid in cement mortar 1:3 as per drawing and technical specifications, excetra complete. (using ARTIFICIAL SAND). Providing sills of granite 20 milimetre to 25 milimetre thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at one killogramme per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per Indian Standard : 4923 YST 310 grade produced from iron ore and blast furnace route, excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and painting complete. (For Ground Floor) 124610.70 Providing and fixing in position guard railing as per Drawing Number 15 type C dated 20-4-1979, with three rows of 40 milimetre diameter galvanised iron pipe 30 centimetre apart and fixed in mild steel channels of section 100 milimetre X 50 milimetre X 6 milimetre spaced 2.5 metre center to centre, 1:2:4 cement concrete bedding of size 45 centimetre X 30 centimetre X 30 centimetre as per detailed drawing, with 3 coats of approved yellow and black paint including necessary excavation in any strata. Providing leather finished polishing to granite stone slab by continuous grinding in four coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing, excetra complete. (For Ground Floor) Providing and applying priming coat over new / old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding, excetra complete. (For Ground Floor) Providing and applying two coats of lead / zinc base oil paint / bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface, excetra complete. (excluding primer coat). (For Ground Floor) Providing and laying in situ cement concrete M-30 with tremix treatment for 200 milimetre thickness for flooring with groove cutting of 4 milimetre wide 20 milimetre deep with necessary refilling with bitumen, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing and fixing auto closing pillar cock of pressmatic tap of approved make including all fixtures, fittings, excetra complete. (For Ground Floor) Providing and fixing 450 milimetre X 550 milimetre size superior type belgium mirror with 16 milimetre diameter nickel plated towel rod, excetra complete. (For Ground Floor) Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, compacting, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer excetra complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) (For Ground Floor) (using ARTIFICIAL SAND). Providing and fixing 15 milimetre diameter ball cock medium type with polyvinyl chloride float including sockets and necessary fittings and tested as per municipal requirements, excetra complete. (For Ground Floor) Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 milimetre X 38 milimetre X 1.22 milimetre box type, 5 milimetre thick sheet glass louvers of approved quality, excetra complete. (For Ground Floor) Providing and fixing mild steel grill work for windows, ventilators, excetra 15 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, excetra complete. (For Ground Floor) Providing and fixing in position (as per Indian Standard 1868/1982) aluminium sliding window of two tracks with rectangular pipe having overall dimentsions 63.50 milimetre X 38.10 milimetre X 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 milimetre X 31.75 milimetre X 1.20 milimetre at weight 0.695 kilogram per running metre. Top and side track section 61.85 milimetre X 31.75 milimetre X 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre. Interlocking secion 40 milimetre X 18 milimetre X 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts excetra complete. - With colour anodising without box. (For Ground Floor) Providing and fixing 30 milimetre thick polyvinyl chloride flush L door shutter consisting of panel of hollow polyvinyl chloride profile of 20 milimetre thickness consisting frame made out of mild steel tubes of 19 gauge thickness and size of 19 milimetre X 19 milimetre inserted inside the hollow section of stiles rails top and bottom rails and two milimetre X 19 milimetre mild steel tubes inserted horizontally inside the hollow profile section using 4/5 milimetre sheet using screws hollow profile shall be lipped with 10 milimetre (5 milimetre X 2) thick X 20 milimetre width on stiles and rails using solvent cement. The inner panel shall be laminated with 5 milimetre thick termite proof waterproof plain / prelam poly vinyl chloride sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening excetra Complete as per direction of Engineer in-charge, manufacturer’s specification and drawing. (For Ground Floor) Providing and fixing Orissa type colour glazed earthenware 625 milimetre X 450 milimetre water closet including trap, cast iron soil and vent pipe upto the out side face of wall including 100 milimetre diameter cast iron plug bend, 15 milimetre thick 10 litre polyvinyl chloride flushing cistern with all necessary pipe connection, excetra complete. (For Ground Floor) Providing and fixing oval type under counter wash hand basin of 16 inch X 22 inch size and of special colour shed having telephonic black / colour granite of 18 milimetre thick fixed on black kadapaa frame work, including cromium plated coupling, bottle-trap using approved make oval type wash basin as per detailed drawing or as directed by Engineer In-charge, excetra complete. (For Ground Floor) Providing and fixing 15 milimetre diameter screw down bib / stop tap of brass including necessary socket union nut complete. (For Ground Floor) Providing and fixing Ivory glazed earthenware full stall type urinal with poly vinyl chloride flushing cistern of 5 litres capacity with fitting inlet pipes and stop tap brackets for fixing the cistern 32 milimetre diameter poly vinyl chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap soil pipe connection upto the outside face of the wall. (For Ground Floor) Providing dry trap/ granite/ quartzite/ gneiss rubble stone soiling 15 centimetre to 20 centimetre thick including hand packing and compacting, excetra complete. Providing first class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:4 including scaffolding, racking joints pointing in cement mortar 1:3 and watering in pillars of rectangular or square shape as shown on the drawing or as directed, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing and laying damp proof course 50 milimetre thick in M-20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Filling in plinth and floors with approved excavated materials in 15 centimetre to 20 centimetre layers including watering and compacting, excetra complete. Providing and fixing of colour coated zincalume (R) AZ 150 (Minimum 150 grams per square metre total on each sides) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre base metal thickness (BMT) (0.5 milimetre TCT), Hi-strength steel with minium 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55 percent aluminium, 43.4 percent zinc, 1.6 percent silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nominal 950-1050 milimetre effective cover width and nominal 25- 30 milimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 milimetre center to centre. The end rib shall be designed for anti capilary groove and return leg. The feed material should have coil manufacturers product details marked at regular interval. Including fasteners with minium fatened with minium 25 um zinc-tin alloy coated, hex head, self-drilling screw, excetra complete. (Weight of profile 4.52 kilogram per square metre). (For Ground Floor) Providing internal cement plaster 12 milimetre thick in a single coat in cement mortar 1:5 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing, excetra complete. (For Ground Floor) Providing and applying two coats Apex Ultima Puranature Anti- Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, excetra) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 kg/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Providing and applying plastic emulsion paint of approved quality, colour and shade to new surfaces in three coats including scaffolding, preparing the surfaces (excluding primer coat), excetra complete. Providing and fixing Indian teak wood eaves boards 15 centimetre wide and 25 milimetre thick plain decorative type including scaffolding and painting with two coats, excetra complete. (For Ground Floor) Providing and laying cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood / steel formwork, steel props, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (Wooden centering will not be allowed)With fine aggregate ( Crushed sand VSI Grade finely washed etc) (For Ground Floor) (using ARTIFICIAL SAND). Providing and laying rough shahabad stone flooring 50 milimetre to 60 milimetre thick and of required width in plain / diamond pattern on a bed of 1:6 cement mortar including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / burnt brick masonry and or tying by binding wire, excetra complete. (For Ground Floor) Providing and applying spray plaster made with finelly graded marble and quartz in 2 milimetre thickness in two coats using putty knife or trowel to newly plaster fairly even surface after minimum 30 days gap, in all positions including finishing the surface using zero number sand paper or fine emry paper gently level the area by moving paper in round circles removing the dust and clean the surface with dry cloth and scaffolding including all materials and labour, excetra complete. (For Ground Floor) Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black / amba white / cadbury brown / RBI red / ocean brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on a bed of 1:4 cement mortar including float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing groove to required size at specified location as directed by Engineer, at junction of brick masonary wall and reinforced cement concrete beams or column, at junction of composite masonary, including scaffolding, finishing curing, excetra complete. Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth approved make excetra complete. (For Ground Floor) Providing and fixing false ceilling of plain asbestos cement sheets 4 milimetre thick with teak wood beadings 45 milimetre X 12 milimetre thick frame work of counrtry teak wood battens of size 70 milimetre X 60 milimetre at 1.00 metre center to center including scaffolding, if necessary, all iron work and painting (visible surfaces) to asbestos cement sheet and beading in two coats, excetra complete. excluding teak wood runner to be paid seperately). (For Ground Floor) Providing and laying in position flooring of telephone black amba white / cadbury brown / RBI red / ocean brown granite stone of approved shade and size 18 milimetre to 20 milimetre thick on a bed of 1:6 cement mortar including cement float, striking joints, pointing in cement mortar 1:3, curing and cleaning, excetra complete. (For Ground Floor) using ARTIFICIAL SAND). Providing and preparing kitchen otta up to 75 centimetre width, made up from 30 milimetre thick and 75 centimetre high vertical support for Kadappa at one metre center to center of 25 milimetre thick both side polished Kadappa middle shelf and bottom of 20 milimetre thick one side polished Kadappa with facia patti of 20 milimetre X 50 milimetre Kadappa including all material, labour, cutting, fixing with cement mortar and araldite, all material labour cutting fixing with cement mortar and araldite curing polished and cleaning excetra complete. (For Ground Floor) Providing and fixing on walls / celling / floor, 15 milimetre diameter chlorinated polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (For Ground Floor) Providing and fixing on walls / celling / floor, 25 milimetre diameter chlorinated poly vinyl chloride pipe with necessary fittings, remaking good the demolished portion, excetra complete.Including removing existing pipe line necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. (For Ground Floor) Providing and laying in trenches 15 milimetre diameter chlorinated poly vinyl chloride pipe including necessary excavation, fittings, refilling trenches, excetra complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed excetra complete. Providing and laying ceramic tiles of having sizes 30 centimetre X 45 centimetre and confirming corrosponding Indian standared for dado and skirting required position with ready made adhesive mortar approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry, cleanding, curing, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Providing and fixing screw down 15 milimetre diameter wheeled stop tap of brass including necessary sockets union nut complete. (For Ground Floor) Providing and fixing 10 centimetre cast iron nahani trap including cast iron grating, bend and piece of cast iron pipe upto the outside face of the wall complete. (For Ground Floor) Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at one kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre X 300 milimetre, making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Provoding and fixing high density polyethylen container one piece moulded water tank made out of high density polyethylen and built corrugated inclusive of delivery upto destination housing, fixing of accessaries such as inlet, outlet, overflow pipe inclusive of all Taxes - Capacity between 1000 litres to 20000 litres. (For Ground Floor) Providing and fixing poly vinyl chloride rain water pipes of 160 milimetre outer diameter and having wall thickness of 2.2 milimetre to 2.7 milimetre confirming to Indian Standard : 13592-1992 including proper rain water receiving recess with poly vinyl chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimetre to 40 milimetre from face of wall affixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the poly vinyl chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge excetra complete. (For Ground Floor) Total-A Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.) Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune. Standard Consistancy, Fineness, Specific Gravity, Setting Time (Initial and Final), Compressive Strength, Soundness Test for Cement Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Artificial Sand Compressive Strength of Cement Concrete Cube Sieve Analysis Test for Metal below 40 milimetre Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Metal below 40 milimetre Flekiness & Elongation Test for Metal below 40 milimetre Concrete Mix Design (with all tests on basic materials) for Grade M-25 Water Absorption, Compressive Strength, Efflorescence Test for Burnt Bricks Compressive Strength of Cement Mortar Fineness Modulus (Sieve Analysis), Silt and Clay Content Test for Sand Crushing Value / Compressive Strength, Water Absorption, Specific Gravity Test for Stone / Rubble Tensile Strength, Percent Elongation, Yield Stress, Weight per Metre, Bend / Rebend Test, Proof Stress (Steel Bar upto 16 milimetre) Tensile Strength, Percent Elongation, Yield Stress, Weight per Metre, Bend / Rebend Test, Proof Stress (Steel Bar above 16 milimetre) Liquid Limit & Plastic Limit for Plinth Filling Soil/Murum Compaction test (Proctor Density) Soil/Murum Compaction test Density by Sand Replacement Method Concrete Mix Design (with all tests on basic materials) for Grade M-30 Thickness, Mass per Running Metre of Aluminium Section Water Absorption, Modulus of Rupture Test for Ceramic / Vitrified Tiles Water Absorption, Modulus of Rupture Test for Natural stone/Kota/Marble/Granite/Tandoor etc) Wood density ,Moisture content Test Total B Total A+B
Contract Date: Apr 29, 2026 Contract Value : ₹ 2.65 Crore
Government Departments No of Bidders 1
Maharashtra View Result →
27.
Housing Urban and Rular Development #10813592 Price Bid
Tender for Construction Of Libary Building At Lalapet Head Of Lalapet Panchayat , Earthwork Excavation For Foundation (For Narrow Excavation) To Full Depth As Per Designed In All Soils And Sub Soils Except Soft Disintegrated Rock Not Requiring Blasting And Hard Rock Requiring Blasting And Bailing Water Wherever Necessary. Refilling The Sides Of Foundation With Excavated Earth Other Than Sand In Layers Of Well Rammed And Compacted And Depositing The Surplus Earth In Places Shown By The Departmental Officers With An Initial Lead Of 10M And Initial Lift Of 2M And Clearing And Leveling The Site Etc. Complete Complying With Standard Specification. , Supplying And Filling In Foundations And Basement With Filling M- Sand In Layers Not Exceeding 15 Cm.Thick,Well Watered,Rammed And Consolidated Etc. Complete Complying With Standard Specifications. , Plain Cement Concrete 1 : 4 :8 ( One Part Of Cement, Four Parts Of Sand And Eight Parts Of Hard Broken Stone ) Using 40 Mm Gauge Hand Broken Hard Broken Granite Stone Jelly Complying With Standard Specifications In , Refilling The Approved Good Quality Earth In Plinths, Area Development Etc. Wherever Specified In Layers Is Not Exceeding 200 Mm Thick, With Available Earth At Site. , Supplying And Filling Of Good Earth Filling Locally Available Earth Transported From The Outside Including Consolidation, Leveling Specified In Layers Of Not Exceeding 200 Mm Thick., Etc. Complete. , Supplying And Erecting Centering And Shuttering For Soffits Including Necessary Supports And Strutting Up To 3 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At About 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification.(Payment For Centering Shall Be Given After The Concrete Is Laid). , Supplying And Erecting Centering And Shuttering For Soffits Including Necessary Supports And Strutting Up To 3 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At About 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification.(Payment For Centering Shall Be Given After The Concrete Is Laid). , Supplying And Erecting Centering And Shuttering For Soffits Including Necessary Supports And Strutting Up To 3 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At About 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification.(Payment For Centering Shall Be Given After The Concrete Is Laid). , Supplying And Erecting Centering And Shuttering For Soffits Including Necessary Supports And Strutting Up To 3 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At About 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification.(Payment For Centering Shall Be Given After The Concrete Is Laid). , Providing And Laying In Position, M-20 Grade In Accordance With Is:456-2000, Using 20Mm And Down Grade Hard Broken Granite Stone Jelly For All Reinforced Cement Concrete Items Of Works With Minimum Cement Content Of 350Kg/M3 And Maximum Water Cement Ratio Of 0.50, Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is:9130 To Accelerate, Rated Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About (5.0 Cu.M) 7730Kg. Of 20Mm Machine Crushed Stone Jelly And With About (3.3Cum) 5156 Kg. Of 10-12Mm Machine Crused Stone Jelly And With About (4.79Cum) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc.,And Providing Fixtures Like Fan Clamps In The Reinforced Cement Concrete Floor / Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements Of Is Standards. (No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials). , Providing And Laying In Position, M-20 Grade In Accordance With Is:456-2000, Using 20Mm And Down Grade Hard Broken Granite Stone Jelly For All Reinforced Cement Concrete Items Of Works With Minimum Cement Content Of 350Kg/M3 And Maximum Water Cement Ratio Of 0.50, Including Admixture (Plasticiser / Super Plasticiser) In Recommended Proportions As Per Is:9130 To Accelerate, Rated Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About (5.0 Cu.M) 7730Kg. Of 20Mm Machine Crushed Stone Jelly And With About (3.3Cum) 5156 Kg. Of 10-12Mm Machine Crused Stone Jelly And With About (4.79Cum) 7670 Kg Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc.,And Providing Fixtures Like Fan Clamps In The Reinforced Cement Concrete Floor / Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements Of Is Standards. (No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials). , Steel - Fe 500 D: Supply, Fabrication And Placing Of Reinforcement Steel Of High Yield Strength Ribbed Bars Of Various Diameters And Grade Conforming To Is 1786 For Reinforced Concrete Work. The Work Includes Recoiling, Straightening, Cutting, Bending, Fabricating, And Placing In Position, At All Levels Including Lead And Lift, According To Drawings, Specifications Etc. Complete And Supply & Use Of 18G Black Annealed Binding Wire Double Fold To Tie The Bars In Position And Providing Precast Cement/ Pvc Cover Blocks For Main Reinforcement To Ensure Specified Cover And Complete., Including All Labor Charges Etc As Directed By Departmental Officers. , Brick Work In Following Cement Mortar 1:5 Using Best Quality Ii Class Table Moulded Bricks 83/4 X 41/4 X23/4 For Foundation And Basement Including Curing Etc.,Complete Complying With Standard Specification.Including Scaffolding Curing Cost Of Reinforcement Etc.All Complete As Per Specifications And Drawings As Directed By The Engineer In-Charge. , Brick Work In Following Cement Mortar 1:5 Using Best Quality Ii Class Table Moulded Bricks 83/4 X 41/4 X23/4 For Foundation And Basement Including Curing Etc.,Complete Complying With Standard Specification.Including Scaffolding Curing Cost Of Reinforcement Etc.All Complete As Per Specifications And Drawings As Directed By The Engineer In-Charge. , Brick Partition Walls Of 11.50Cm Thickness Using Best Quality Ii Class Table Moulded Bricks 83/4 X 41/4 X23/4 In Cement Mortar 1:3 (One Cement And Three Sand) Using Hoop Iron Reinforcement If Found Necessary Including Curing Etc. Complete And As Directed By The Departmental Officers. , Supplying And Painting The Walls With Two Coats Of Wall Putty As Instructed By The Departmental Officers Including Preparation Of Surface Curing, Etc., Complete In All Floors Complying With Standard Specifications (The Wall Putty Shall Be Got Approved By The Executive Engineer Before Use Of Work). , Providing & Applying 12 Mm Thick Cement Plaster In Cm 1:5 (1 Part Of Cement: 5 Parts Of Sand) To Walls Internally In Single Coat At All Levels To Correct Line And Level Including Chicken Wire Mesh At All Joints Of Brick And Concrete Surfaces With Minimum Overlap Of 150 Mm In All Directions, Scaffolding, Rounding Off Or Chambering Of Corners, Offsets, Fin/ Bands, Projections, Etc. And Cleaning Of Surface, Raking Out Joints, Roughening Of Surface, Chiseling The Undulated Surface Wherever Necessary And Curing, Etc., All Materials And Labor Complete In All Respects Including All Lead, Lift And Descent And As Directed. , Providing & Applying 12 Mm Thick Cement Plaster In Cm 1:5 (1 Part Of Cement: 5 Parts Of Sand) To Walls Externally In Single Coat At All Levels To Correct Line And Level Including Scaffolding, Rounding Off Or Chambering Of Corners, Offsets, Fin/ Bands, Projections, Etc. And Cleaning Of Surface, Raking Out Joints, Roughening Of Surface, Chiseling The Undulated Surface Wherever Necessary And Curing, Etc., All Materials And Labor Complete In All Respects Including All Lead, Lift And Descent And As Directed. , Paving The Floor With Best Quality Vertified Tiles Of Size 600 X 600 X 8Mm Of Approved Colour, Shade And Quality Laid In Cement Mortar 1:3 (One Cement And Three Crushed Stone M.Sand) 20Mm Thick In All Floors And The Top Pointed With The White Cement Mixed Same Colour Pigments Etc., Complete Complying With Standard Specification. (The Make And Brand Of The Tiles Should Be Got Approved By Executive Engineer Before Use On Works) , Providing Granolithic Floor Finish Of The Following Thickness With Plain Cement Concrete 1:2:4 (One Cement, Two Sand And Four Aggregate) Using 10 To 12Mm Gauge Hard Broken Stone Jelly Including Laying, Finishing And The Top Rubbed Smooth With Power Trawl,(25 Mm Thick) , Providing, Fabricating And Fixing M.S. Grills Windows, And Ventilator, Gates, Ladders, Rail Pipes, Nosing Angles, With M.S.Lugs In Staircase Steps Etc., Made Out Of M.S Rods, Flats, Angles, Pipes, Channels Etc. Including Necessary Fixtures Complete As Per Drawings And Specifications And As Directed By The Engineer , Upvc Window.The Cost Includes Cost Of All Materials, Labour Charges And Other Incidental Charges, Etc., Complete , Manufacturing, Supplying And Fixing Of Steel Doors With Following Specification.Ms Angle Of Size 40X40x6mm At 3.5 Kg/M Used For Outer Frame And Ms Angle Of Size 35X35x5mm At 2.6 Kg/M For The Shutter Frame. Stiffeners With 32X6mm At 1.5 Kg/M Ms Flat Is Provided As The Lock Rail Of The Door And Welded Intact On Both Ends To The Shutter Frame.18 G Cr Sheets Of Best Quality Is Laid As Panel In The Shutter Frames. 18X5mm At 0.70 Kg/M Ms Flat Is Welded Over The 32X6mm At 1.50Kg/M Ms Flat On The Rear Side Of The Door, Sandwiching The Cr Sheet For Rigidity. Additional Stiffeners With 18X5mm At 0.7 Kg/M Ms Flats Are Provided Diagonally On The Rear Side Of The Shutter. 300Mm Length Of Hinges 2Nos, For Shutter Is Provided. 6 Nos. Of 250Mm Length Hold Fasts 200Mm Length Specified At The Ends Are Welded To The Outer Frame Of The Door. Tower Bolt 2 Nos. At The Top Provided. , Supplying And Painting New Ceiling Plastered Surface With Two Coats Of Distempering One Coat Of Distemper Primer , Supplying And Painting New Plastered Internal Wall Surface With Two Coats Of Distempering One Coat Of Distemper Primer , Supplying And Painting The Walls With One Coat Of Wall Primer And Two Coats Of Exterior Emulsion (Apex Or Equivalent) As Instructed By The Departmental Officers Including Preparation Of Surface Curing, Etc., Complete In All Floors Complying With Standard Specifications (The Colour And Shade Of The Cement Paint Shall Be Got Approved By The Executive Engineer Before Use Of Work). , Paving The Top Of Roof With Solar Reflective Ceramic Tiles Of Size 305 X 305 X 7Mm Thick Of Approved Quality And Colour Laid In Cement Mortar 1:3 (One Cement And Three M.Sand) 12Mm Thick And Pointed With Tile Grout (Nitotile Grout Or Equivalent) And Cement In The Ratio Of 1:3 For Joint, Curing Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. (The Make And Brand Of The Tiles Should Be Got Approved By The Executive Engineer Before Use On Works) , Supplying And Fixing Cuddapah Slab For Cupboard Shelf , Providing Cup-Board Shutter With Frame Using Termite / Water Proof Plywood Of 19Mm Thick Over Which Laminated Sheet Of 0.8Mm Thick Fixed Inside The Shutter And 1Mm Thick Fixed In The Outside Of The Shutter Using Fevicol Along With Necessary Furniture Fittings, Such As, Hydralic Hinges, Tower Bolt, Handles, Multi Purpose Locks Etc., As Directed By The Departmental Officers. The Design Pattern, Water Proof Plywood, Laminate Sheet And Other Materials Should Be Got Approved From The Executive Engineer Befoe Use On Wor , Cement Concrete 1:2:4 Using 20 Mm And 12 Mm Metal Including All Cost And Conveyance And All Labour Charges , Provision For Electrification , Wiring 2 X 1.5 Sq.Mm (22/0.30)Pvc Insulated Unsheathed Sc.Cu.Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With Tw Switch Box With In Flush With Wall Covered With Hylem Sheet Of 3 Mm Thick With Painting Of Suitable Colour For Concealed Pvc Light/ Fan Point (Sd No.25) , Supply And Fixing Of 4-40W Led Tube With Fitting Inclusive Of All Charges (Sd 88) , Wiring 2 X 1.5 Sq.Mm (22/0.30)Pvc Insulated Unsheathed Sc.Cu. Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With Tw Switch Box With In Flush With Wall Covered With Hylem Sheet Of 3 Mm Thick With Painting Of Suitable Colour For Concealed Pvc Plug Point (Sd No.38) 5 Pin Plug Point , Supply And Fixing Of 1200Mm Sweep Ac Ceiling Fan Complete With Stepped Electronic Regulator With 300Mm Down Rod On The Existing Clamp Sd 106 , Supply And Fixing Of Water Tight Bulk Head Fitting With Guard (Philips / Bajaj / Crompton / Klite) Suitable For Incandencent Lamp And 60W Bulb (Sd N0.83) , Supply And Run Of 2 Of 1.50 Sq.Mm Polythene Insulated Pvc Sheathed Heavy Duty Sc Copper Conductor Of 1100 V Grade On 7/20 Gi Bearer Wire For Service Connection Mains (Sd No.64) , Supply And Fixing Of Tneb Meter Board Suitable For 32A Single Phase Service Connection With 32A Fuse Unit (500V) 32A Neutral Link And Earth Link (1 X 1/8 Copper Flat) On Tw Plank Of Size 375Mm X 300Mm X 19Mm With Supporting Tw Reepers Of 1 Thick An Either Side With Painting With Suitable Bolt And Nuts For Fixing The Tw Plank On Wall With Earth Connection And Inter Connection With 7/20 Pvc Insulated Copper Wire From Eb Meter To Fuse Unit. (Sd No. 125) , Supply And Run Of 2X4 Sqmm (22/0.3) Pvc Insulated Sc Unsheathed Cu.Conductor Of 1100V Grade In 25Mm Dia Gi Pipe (Class B) Suitably Bent At Both Ends With Necessary Angle Iron Upright And End Supports For Mains Sd 70 , Supply And Fixing Of 16 Amps Dp Switch Of 500V With Metal Clad With Fuse And Neutral Sd 142 , Gst Amount For Providing Service To Government Contract Works For The Above Construction & Maintenance Works.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
28.
Housing Urban and Rular Development #10796259 AOC
Supply, Installation And Maintenance Of Mechanical Compactors, Storage Systems, Furniture Articles, Solid Teak Wood Benches For Public Seating In New Judicial Complex Tower Of Justice At Gurugram-Overall Size Of Personal Locker Unit Shall Be Of Dimensions 900Mm(W) X 400Mm(D) X 1850Mm(H) Having 15 Locker Unit. Locking Shall Have Pad Lock . Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Powder Coating Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. , Providing And Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 1320Mm X 660Mm X 1200Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 525Mm X 350Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In The Front Side Of User As Well As On The Both Sides Of The User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions (Pre-Treated) And Duly Powder Coated With Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways And 4 Ways (L-Cover For Corner, T-Cover For Middle Section Wherever Required). The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm(H) X 60Mm(D) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board (With Fabric) And Marker Board Provided At Front Of The User. Laminated Top Tile And Bottom Tile Shall Be Situated At Both Sides Of The User And Below The Work Top Respectively. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Fixed Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 725Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close And Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Nylon Castor Based Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm With 18Mm Thick Pre-Laminated Particle Board. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (5 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (4 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (1 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (5 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915Mm X 910Mm X 2190Mm (2 Nos) 1 Bay Single Last Movable (Lockable) 915Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915 Mm X 910Mm X 2190Mm (1 Nos) 1 Bay Single Last Movable (Lockable) 915 Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (2 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 1830Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 1830Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 1830Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (3 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 1830Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 1830Mm X 910Mm X 2190Mm (3 Nos.) 2 Bay Single Last Movable (Lockable) 1830Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 4 Bay Single Static Fixed 4800Mm X 455Mm X 2190Mm (1 No.) 4 Bay Double Movable 4800Mm X 910Mm X 2190Mm (4 No.) 4 Bay Single Last Movable (Lockable) 4800Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 4 Bay Single Static Fixed 4800Mm X 455Mm X 2190Mm (1 No.) 4 Bay Double Movable 4800Mm X 910Mm X 2190Mm (5 No.) 4 Bay Single Last Movable (Lockable) 4800Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated.Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915Mm X 910Mm X 2190Mm (3 Nos) 1 Bay Single Last Movable (Lockable) 915Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 3600Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 3600Mm X 910Mm X 2190Mm (4 Nos.) 3 Bay Single Last Movable (Lockable) 3600Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 2745Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 2745Mm X 910Mm X 2190Mm (2 Nos.) 3 Bay Single Last Movable (Lockable) 2745Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 2745Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 2745Mm X 910Mm X 2190Mm (3 Nos.) 3 Bay Single Last Movable (Lockable) 2745Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 3600Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 3600Mm X 910Mm X 2190Mm (5 Nos.) 3 Bay Single Last Movable (Lockable) 3600Mm X 455Mm X 2190Mm (1 No.) , Providing And Supplying 2 Seater Visitor Chair With 3 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 3.82Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 1100 ±10 Mm. Total Weight = 36.8 Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01.). Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying 3 Seater Visitor Chair With 4 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 5.65Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 1625 ±10 Mm. Total Weight = 55Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01.). Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying 4 Seater Visitor Chair With 5 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 7.56Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 2175 ±10 Mm. Total Weight = 73.2Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01. Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 To Be Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 710±10 Mm(H) From Seat. Overall Height Shall Be = 1170±10 Mm And Overall Width/Depth = 740±10 Mm. , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminum With Cushion Arm Having Leatherite Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 540±10 Mm(W) X 750±10 Mm(H) From Seat. Overall Height Shall Be = 1210±10 Mm, Overall Depth = 630±10 Mm And Overall Width = 650±10 Mm. N , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Pure Leather Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminum With Cushion Arm Having Leatherite Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 540±10 Mm(W) X 750±10 Mm(H) From Seat. Overall Height Shall Be = 1210±10 Mm, Overall Depth = 630±10 Mm And Overall Width = 650±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 And Should Be Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 560±10 Mm(H) From Seat. Overall Height Shall Be = 1010±10 Mm, Overall Depth = 680±10 Mm And Overall Width/Depth = 740±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood And The Back Shall Be Supplied With Metal Pipe, Inserted Between Backrest. The Chair Shall Be Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ In Seat And 12Mm Thick Having Density 23Kg/M³ In Back. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8±0.1 Mm Thick And 535 Gsm And Breathable Mesh Tapestry Behind The Backrest.. Ms Chrome Plated Pipe Frame Shall Be Provided On Both Side Of Seat And Back With Size 25Mm X 10Mm. The Backrest Shall Be Supplied By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. The Armrest Shall Be Used Black Integral Polyurethane Arm Mounted On Crca Chrome Plated Pipe Having Size 40Mm X 10Mm Completely Joint With Seat And Back With The Assistance Of Allen Key Screw. A Chrome Plated Round Bend Pipe Of Dia. 9Mm Shall Be Provided Behind The Backrest Of The Chair And Welded With Main Frame. For Seating Durability The Chair Shall Have Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Shall Have Five Legged Crca Chrome Plated Having Pitch Circle Dia. 640Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chairs Should Be Injection Moulded In Black 30% Glass Filled, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 490±10 Mm(W) X 520±10 Mm(D) And Back Size Shall Be 450±10 Mm(W) X 535±10 Mm(H) From Seat And Overall Height = 980±10 Mm, Overall Width/Depth = 740±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Pure Leather Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. The Chair Shall Be Supplied With Chrome Plated With Cushion Arm Having Leatherite Covering Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 580±10 Mm(H) From Seat. Overall Height Shall Be = 1040±10 Mm, Overall Depth = 620±10 Mm And Overall Width = 620±10 Mm. , Providing And Supplying A Visitor Chair With Ergonomic Design For User Comfort And Shall Have Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood And The Back Shall Be Supplied With Metal Pipe, Inserted Between Backrest. The Chair Shall Be Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ In Seat And 12Mm Thick Having Density 23Kg/M³ In Back. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8±0.1Mm Thick, 535 Gsm And Breathable Mesh Tapestry Behind The Backrest. Ms Chrome Plated Pipe Frame Shall Be Provided On Both Side Of Seat And Back With Size 25Mm X 10Mm. The Backrest Shall Be Supplied By Keeping The Natural Curvature Of The Spine Which Helps To Provide Back Support. The Armrest Shall Be Used Black Integral Polyurethane Arm Mounted On Crca Chrome Plated Pipe Having Size 40Mm X 10Mm Completely Joint With Seat And Back With The Assistance Of Allen Key Screw. Chrome Plated Round Bend Pipe Of Dia. 9Mm Shall Be Provided Behind The Backrest Of The Chair And Welded With Main Frame. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Chrome Plated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10 Mm(W) X 510±10 Mm(D) And Back Size Shall Be 450±10 Mm(W) X 540±10 Mm(H) From Seat And Overall Height = 980±10 Mm, Overall Width = 560±10 Mm. N , Providing And Supplying A Visitor Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Chrome Plated Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 560±10 Mm(H) From Seat. Overall Height Shall Be = 1010±10 Mm, , Providing And Supplying Centre Table With An Overall Size 1200Mm X 1200Mm X 410Mm. The Top Should Be Made Up Of 75Mm Thick, It Would Be 25Mm At Mid And 75Mm At Sides. The Mdf Top Should Have Decorative Finish With Veneer And Pu Polish And Shade As Per Directions Of Engineer-In-Charge. The Understructure Shall Consist Of 4 Nos. Of Ms Sheet Gold Leg With 6Mm Thick. , Providing And Supplying Centre Table With An Overall Size 600Mm X 600Mm X 410Mm. The Top Should Be Made Up Of 75Mm Thick, It Would Be 25Mm At Mid And 75Mm At Sides. The Mdf Top Should Have Decorative Finish With Veneer And Pu Polish And Shade As Per Directions Of Engineer-In-Charge. . The Understructure Shall Consist Of 4 Nos. Of Ms Sheet Gold Leg With 6Mm Thick. , Providing And Supplying Kids Chair. The Complete Structure Shall Be Made Up Of One Piece Injection Moulded Polypropylene Shell. The Understructure Shall Consist Of Four Legs.There Is A Square Hole On The Backrest Of Size L 140 Mm X H 50 Mm For Air Flow.The Chair Is A Single Piece Unit Made From Virgin Grade Material. The Seat Size Shall Be 280±10 Mm(W) X 300±10 Mm(D) And Back Size Shall Be 310±10 Mm(W) X 330±10 Mm(H) From Seat And Overall Height = 610±10 Mm, Overall Depth = 420±10 Mm, Overall Width = 370±10 Mm.Seat Height = 330±10 Mm The Leg Dimension Is 47 Mm X 37 Mm, L Shaped. , Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support With The Assistance Of Cushion. The Armrest Shall Be Of Chrome Plated Frame Padded With Cushion With Leatherite Covering On Top. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Pipe Having Cross Section 40Mm X 20Mm. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Seat Size Shall Be 500±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 490±10 Mm(W) X 550±10 Mm(H) From Seat And Overall Height = 960±10 Mm, Overall Width = 600±10 Mm And Overall Depth = 670±10 Mm. N , Providing, Placing And Installing A Slotted Angle Rack With An Overall Size 900Mm (W) X 600Mm (D) X 1800Mm (H). The Panel Shall Have 5 Nos. Of Shelves Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Crca Slotted Angle Shall Be Supplied With 2Mm Thick Having Size 40Mm X 40Mm. All Steel Components Shall Be Have Finishing With Powder Coating Of Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. Corner Plate (Gussets) And Fasteners Shall Be Provided For Complete Assembly. , Providing, Supplying And Placing In Position An Indoor Chair Complete In All Respects Manufactured Using 20% Glass-Filled Injection Moulded Polypropylene, Ensuring High Strength, Durability, And Resistance To Wear And Tear. The Chair Shall Be Of Single-Piece Moulded Construction With A Smooth Finish And Free From Any Sharp Edges Or Defects. The Frame Structure Shall Be Supported By Four Sturdy Polypropylene Legs Of Tapered Design, Having A Diameter Of 35 Mm At The Upper End And 25 Mm At The Lower End, Providing Adequate Stability And Load-Bearing Capacity. The Seat Size Shall Be 420 ± 10 Mm (Depth) × 460 ± 10 Mm (Width), And The Back Size Shall Be 395 ± 10 Mm (Width) × 360 ± 10 Mm (Height From Seat Level), Ergonomically Designed For Comfortable Seating Posture. The Overall Height Of The Chair Shall Be 790 ± 10 Mm And Overall Depth Shall Be 515 ± 10 Mm. The Chair Shall Have A Uniform Finish, Be Uv Stabilized, And Suitable For Long-Term Use. Colour Shall Be As Approved By The Department/Engineer-In-Charge. The Rate Shall Include Supplying, Transporting, And Placing The Chair At Site In Complete Condition. Sample Shall Be Submitted For Prior Approval Before Bulk Supply. , Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. All Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf And Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Powder Coating Of Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Supplying And Placing A Modular Table With An Overall Size 1350Mm X 900Mm X 750Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms Crca Powder Coated Rectangle Pipe Frame Having Cross-Section Area 50Mm X 25Mm With 1.2Mm Thick. The Table Understructure Shall Be Supplied With Ms Powder Coated Round Leg Pipe 63 X 1.2Mm. The Gable End Shall Be Given At One Side Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Fixed Pedestal Unit Shall Be Supplied With 1 Nos. Of Drawer Plus 1 Filing At One Side. Facia Of Drawer And Filling In 18Mm Plpb Board The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Aluminium Recessed Handle. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. Finishing With Powder Coating Of Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Supplying And Placing Cafeteria Table With An Overall Size 1400Mm X 900Mm X 720Mm. The Top Of The Table Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminated. The Top Profile Shall Be In Rectangle Shape With Round Corner And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Size 40Mm X 20Mm With 1.6Mm Thick. The Legs Shall Have The Combination Of Ms Powder Coated And Chrome Plated. The Joints Shall Be Made By Using Tig Welding. There Shall Be Adjustable Leveler Provided With Metal Insert At Bottom To Avoid Scratches On The Floor. , Supplying And Placing Center Table With An Overall Size 1200Mm X 1200Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Rectangle Shape With Bevelled Edges. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 820Mm X 390Mm With The Assistance Of 31 Nos. Small Round Strips Having 5Mm Dia.The Under Structure Shall Have Ss 202 Grade Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. N , Supplying And Placing Center Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Rectangle Shape With Bevelled Edges. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 820Mm X 390Mm With The Assistance Of 31 Nos. Small Round Strips Having 5Mm Dia. The Under Structure Shall Have Ss 202 Grade Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. N , Supplying And Placing Center Table With An Overall Size 600Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Square Shape And The Edges Shall Be In Chamfer Shape. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 270Mm X 390Mm With The Assistance Of 9 Nos. Small Round Strips Having 5Mm Dia. And 370Mm Length. The Under Structure Shall Have Ss With Shiny Chrome Finish Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 1500Mm X 750Mm X 750Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 45Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate And Finish As Per Shade Approved By Engineer-In-Charge. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Extruded Aluminium Profile Shall Be Attached On The Both Side Front And Back Side Of The Gable Ends And Bottom Side Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board Of Height 600Mm In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 2100Mm X 900Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Have The Size 2100Mm X 900Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With One Side Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edgebander Machine At 200 0C. The Table Top Shall Be Supported By Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Have The Size 1050Mm X 695Mm With 49Mm Thick And 100Mm X 695Mm With 18Mm Thick. The Gable End Shall Be Made Up Of Pre-Laminated Particle Board With Appropriate Pvc Edge Banding And Covered Both Side By Aluminium Section. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Desk. The Modesty Panel Shall Have An Overall Size 1400Mm X 400Mm With 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 7200Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Round Front And Back And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End.It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Full Round Post Form And Other Edges Sealed With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be In Between.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size Dia. 1200Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Circular Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Shall Be Supported On Ms Powder Coated Round Pipe Having 50Mm Dia With 1.6Mm Thickness And Over Particle Board Gable End Of 18Mm Thickness. The Table Understructure Shall Have 4 Nos. Of Legs. The Table Is Provided With 8Mm Thick Bottom Plate And 5 Mm Thick Top Plate. There Shall Be Gliders Provided At The Base To Avoid Scratches On The Floor. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Supplying And Placing Conference Table In Completely Knock Down Conditions With Per Seat Size 675Mm X 600Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be With Minifix Dowels, Pins And Ms Brackets. The Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In C Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And The Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380 , Supplying And Placing Corner Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Understructure Shall Consist Of Ss 202 Grade Pipe Frame With Shiny Chrome Finish With An Overall Size The Size 40Mm X 20Mm With 1.6Mm Thick. One Nos. Footstep Shall Be Provided Between The Frame With Same Size I.E. 40Mm X 20Mm. There Shall Be Ppcp Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Supplying And Placing Modular Table In Completely Knock Down Conditions With An Overall Size 1800Mm X 1650Mm X 750Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1800Mm X 750Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380. The Top Shall Be 50Mm Thick On Edges, After 100Mm From Edges It Should Be 25Mm Thick. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. Extruded Aluminium Profile Shall Be Inserted In The Side Edges Of The Table On Both Side. The Table Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Cross-Section Area 50Mm X 25Mm With 1.6Mm Thick. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 50Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 900Mm X 450Mm X 750Mm. The Storage Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380. The Top Shall Be 25Mm Thick And All Other Profile I.E. Side, Back, Shutter, Shelf, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 1 Nos. Of Adjustable Shelf And 2 Nos. Of Door Shutters Shall Be Provided For Opening And Closing The Storage. The Shutter Shall Be Operated With Concealed Crank Hinge With Al Die Cast Handle As Well As Mp Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close And Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board And ±0.2Mm For Metal. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Supplying And Placing Nursery Classroom Table With An Overall Size 1400Mm X 300Mm X 550Mm. The Top Of The Table Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminated. The Top Profile Shall Be In Curve Shape With Round Corner And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Legs Shall Have The Combination Of Ms Powder Coated And Chrome Plated With 40Mm Dia. The Joints Shall Be Made By Using Tig Welding. There Shall Be Adjustable Leveler Provided With Metal Insert At Bottom To Avoid Scratches On The Floor. , Supplying And Placing Office Table In Completely Knock Down Conditions With An Overall Size 3000Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of Medium Density Fibre-Board With Veneer Laminate Of Shade As Per Engineer-In-Charge. The Top Panel Shall Be In Rectangle Shape With 79Mm Thick (75Mm Mdf Plus 4Mm Natural Veneer And Pu). Veneered Portion Of Work Surface Shall Be Finish With Pu Polish. The Edges Of The Table Shall Be Supplied With Solid Brass Bar Strips Having Cross-Section Area 25Mm X 5Mm All Around Worktop. The Top Panel Shall Be Supported On Ms/Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Top Shall Be Enclosed With Flapper Box On Both Sides For Electric Provision Duly Polished. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be 63Mm Thick Made Up Of (59Mm Mdf Plus 4Mm Natural Veneer And Pu). The Table Shall Be Clad With 29Mm Thick (25Mm Mdf Plus 4Mm Natural Veneer And Pu) Modesty Panel Which Provide Structural Support For The Table. The Profile Of The Gable End And Modesty Panel Shall Be In Linear Shape With Appropriate Veneer Surface. There Shall Be Leveler Provided With Metal Insert At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Table Shall Be Supplied With Both Side Pedestal Unit With An Overall Size 600Mm X 920Mm X 590Mm. Top, Side, Back, Facia Shall Be Made Up Of 18Mm Thick Mdf Board With Approved Veneer Laminate. It Shall Have 3 Nos. Of Drawer Operated With The Assistance Of Soft Closed Ball Bearing Channel And Grooves Handle For Easy Griping. The Complete Structure Shall Be Supplied With Approved Veneer Laminate And Pu Polish Accordingly. The Table And Pedestal Have To Be Made In Such A Way That No Gap Should Be Seen In Between. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board And ±0.2Mm For Metal. , Supplying And Placing Single Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm And Color As Per Direction Of Engineer In Charge. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 915±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm.N , Supplying And Placing Storage Unit With An Overall Size 600Mm X 450Mm X 1800Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Shelf, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have Four Nos. Of Adjustable Shelf. Door Shutters Shall Be Provided For Ease Of Opening With The Assistance Of Soft Closed Concealed Crank Hinge And Leather Handle. The Front Section Of The Shutter Shall Be Supplied Ss 202 Grade Pipe Frame (Loop) Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Understructure Shall Consist Of Ss 202 Grade Leg Having Cross-Section Area 80Mm X 20Mm With 1.6Mm Thick. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Storage Unit With An Overall Size 900Mm X 450Mm X 900Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380 And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Shelf, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have Two Nos. Of Adjustable Shelf. Door Shutters Shall Be Provided For Ease Of Opening With The Assistance Of Soft Closed Concealed Crank Hinge And Leather Handle. The Fornt Section Of The Shutter Shall Be Supplied Ss 202 Grade Pipe Frame (Loop) Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Understructure Shall Consist Of Ss 202 Grade Leg Having Cross-Section Area 80Mm X 20Mm With 1.6Mm Thick. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1900±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. N , Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Pure Leather Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1900±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. , Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm And Color As Per Direction Of Engineer In Charge. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. N , Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Pure Leather Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. , Wooden Bench 2.191 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.2 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respect , Wooden Bench 2.242 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.282 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.494 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.57 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.703 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.022 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.024 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.025 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.1 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.182 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.192 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.34 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.386 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.5 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.559 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.58 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.621 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.7 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.895 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.922 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.929 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects.
Contract Date: May 11, 2026 Contract Value : ₹ 17.47 Crore
Government Departments No of Bidders 5
Haryana View Result →
29.
Water Resources and Irrigation #10778603 Price Bid
Tender For Dvdb Works In Nct Of Delhi Sub Work:-Renovation Of Baghel Chaupal At Village Basai Darapur In Madipur Ac- 1 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 3 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter 4 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend 5 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe (Plain) 6 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm 7 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 8 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 9 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 10 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 11 Providing and fixing 100 mm sand cast Iron grating for gully trap. 12 Providing and fixing soil, waste and vent pipes 100 mm dia Sand cast iron S&S pipe as per IS: 1729 13 Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS - 1729 14 Providing and fixing single equal plain junction of required degree 100x100x100 mm Sand cast iron S&S as per IS - 1729 15 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 16 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore 17 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore 18 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore 19 Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 15 mm nominal bore 20 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore 21 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent 22 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 23 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm 24 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 26 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below 27 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 28 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes 29 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick 30 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 31 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 32 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq. metres and below 33 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. 34 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 35 Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge. 36 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 37 Providing and fixing 34/36 watt LED panel of size 600x600mm suitable for grid ceiling control with white sheet complete with driver as required(Make Havells/Bajaj/Crompton 38 Supply of 2.0TR Spilt Air Conditioner complete with indoor & outdoor unit, compressor, refrigerant etc. 3 Star rated capacity : 2.0 TR (nominal Marketing capacity in Ton, as per BEE Standards) (Make Voltas, Daikin, O-General) 39 Supply of refrigerant copper pipe (suction & Discharge) for interconnection indoor and outdoor unit of Suitable Dia as per manufecruters standerd and recommandation for the above mentioned air conditioners 40 Supply of electirc cable of 3 core 4 Square mm from power Source to indoor or outdoor unit for each of the air conditioner preferable reputed make 41 Supplying, installation, testing and commissioning of compatrmentallised Cubicla panel board made up of 6 mm thick CRCA Sheet dust and vermin proof duly phosphatize and painted in clusive of suitablr strip, all bus bar complete with inter connection etc. 42 Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as required.(Group C). 43 Supplying, installation, testing and commisioning of 1200mm sweep AC electric ceiling fan capacitor type with double ball bearing complete with down rod, canopies, shackless, blades but without regulator suitable for operation on 230/240 volts, 50HZ single phase AC supply including wiring the down rod of standard length up to 1mtr with 2x1.5 Sq.mm PVC insulated copper conductor with fan sheet etc. as required (Make Bajaj/Havells/Usha/C.G.) (M/R) 44 Supplying, installation, testing and commisioning of 70/72 watt LED 6000K asymmetric new generation energy saving and environment long life versatile pressure die cast aluminium IP 66 roadway luminaries with high power LED light source complete etc. As required housing reflector and enclosed with toughened glass complete with all accessories. Phillips,Bajaj, Crompton,Helonix,Havells, (Model LHFAXU7DNP6J070). (M/R) Please Enable Macros to View BoQ information
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Delhi View Result →
30.
Public Administrative Department #10714170 Price Bid
Civil Work For Auditorium For Nagar Parishad, Dausa, Rajasthan Civil Work For Auditorium For Nagar Parishad, Dausa, Rajasthan EARTH WORKClearing Grass and Removal of Rubbish (Maximum 150mm) by manual means and disposal at a lead of 50 metres as per MoRT&H specification clause 201. 2 Earth work in excavation in open area, STP, WTP, Pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of Engineer. (Measurements for payment to be done as per standard drawings). In all type of soil. Upto 3.0 m depth. 3 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m. 4 Add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.1.1 5 In ordinary rock. Depth upto 1.5 M. 6 Add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.2.1 7 Carriage of Materials by mechanical transport including loading, unloading and stacking ::Upto 1 Km 8 Stone, boulders, gravelly materia 9 Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. 10 Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion). 11 Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRT&H specifications with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification including all material, labour, machinery as per clause 710.1.4 of IRC:78 and clause 2200 of MoRT&H specification. 12 CONCRETE WORK 13 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 14 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 15 REINFORCED CEMENT CONCRETE 16 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (As per design mix). 17 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement :1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) (As per design mix) 18 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-30 Grade Concrete. 19 Reinforced cement concrete work in arches, arch ribs, domes, vaults, shells, folded plate and roofs having slope more than 15° upto two stories excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 20 Providing and laying upto two stories reinforced cement concrete in kerbs, steps and the like excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 21 Add extra for laying reinforced cement concrete above two stories (or 7.50 mtr height above plinth level) for every one storey or 3.00 m height or part thereof. 22 Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 23 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 24 Suspended floors, roofs, landings, balconies and access platform. 25 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 26 Columns, Pillars, Piers, Abutments, Posts and Struts.22.1.5 27 Stairs, (excluding landings) except spiral-staircases. 28 Extra for shuttering in circular work (20% of respective centring and shuttering items). 29 Edges of slabs and breaks in floors and walls. Under 20 cm wide. 30 Weather shade, Chajjas, corbels etc., including edges. 31 Add extra for doing centering and shutteriing work for every additional height of 1 metre or part thereof beyond initial 7.5 metre height from plinth level. 32 Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. 33 BRICK / STONE MASONERY WORK 34 Brick work with FPS bricks of class designation 75 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand). 35 Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand). 36 Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:3 (1 cement :3 coarse sand). 37 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 38 Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering. In cement mortar 1:4 (1 cement : 4 coarse sand). 39 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Green / Black Above 3601 Cm2 Slabs. 40 Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work. Moulding. 41 Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete 42 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 43 Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles 44 Providing and fixing Motive pieces all coloures for glazed tiles laid over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. Size 200 x 300mm. 45 P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm. 46 Providing and fixing 1st quality MAT & GLOSSY finished ceramic tiles colour such as standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the the cost of cement mortar bed 1:4) Size 300mm x 450mm. 47 Providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete. (excluding the the cost of cement plaster on wall and pillar). Size 600mm x 1200mm 48 38mm thick wood block flooring of first class teak wood laid over 25mm thick levelling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10mm nominal size) to be paid separately coated with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type) upto half depth, planed, levelled smooth and finished complete. 49 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 50 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone. 51 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 52 ROOFING 53 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75mm deep chase. 54 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m². 55 Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 square decimetre 0.80 mm thick 56 Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 57 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 fine/ coarse sand) 58 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand). 59 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. 60 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 61 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) toplayer 6mm thick with cement mortar 1:4 (1 cement : 4 fine sand). Design on outer plaster. 62 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 64 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 65 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work. 66 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 67 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8193, density 16kg/m3 , 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. 68 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving screws, over expansion joints on vertical surfaces/ceilings with full threaded, cadmium plated steel screws 4mm dia. stem, 30mm long and aluminium washers 2mm thick, 15mm dia. at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete. Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron). 69 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width. 70 Providing and laying expansion joint complete as per drawing and technical specification and as per clause 2605 of MoRT&H Specification including all material, labour, machinary etc. 71 Fillar joint with 20m thick compressible fibre board. 72 Fillar joint with Joint sealing compound with coarse sand and 6 %bitumen by weight. 73 Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: Hot finished seamless type tubes. 74 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 75 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 76 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. M.S. tube. 77 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 78 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure A : 30 mm thick Decorative teak veneer both side. 79 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured). Decorative teak veneer both side. 80 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) Rectangular or square. 81 Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area ofthe shutter to be measured). 82 Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 50 mm long. 83 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm dia. 84 Providing and fixing to existing door frames. 30mm thick factory made solid both side Pre-laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded Pre-laminated PVC C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side Pre-laminated PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification & drawing (for W.C. and bathroom door shutter). 85 ALUMINIUM WORK 86 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). 87 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron). 88 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 25 mm thick 89 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basicitem) : With float glass panes of 5.50 mm thickness. 90 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate. 91 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin-charge complete. 355 X 19 mm. 92 INTERIOR WORK 93 FALSE CEILING 94 Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I, 95 Sanitary Items 96 Plumbing 97 Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour. 98 15 mm nominal bore with 3 cm length. 99 15 mm nominal bore with 45 cm length. 100 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 101 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 102 15 mm nominal bore 103 20 mm nominal bore 104 25 mm nominal bore 105 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 106 25 mm nominal bore Horizontal 107 25 mm nominal bore Vertical 108 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 109 Sanitary 110 Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : Upto 300 mm dia. 111 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 112 100 mm dia. pipe 113 125 mm diameter pipe 114 Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead : 115 100 mm diameter pipe 116 125 mm diameter pipe 117 Supplying pig lead at site of work. 118 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter 119 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : 120 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With bricks with class designation 75 121 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With bricks class designation 75 122 Providing and fixing square-mouth S.W. gully trap grade A’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With bricks class designation 75. 123 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design With bricks. 124 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design With bricks 125 Fixtures 126 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. 127 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. 128 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. 129 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 130 Rectangular shape 453x357mm 131 Rectangular shape 1500x450 mm 132 Providing and fixing 100 mm sand cast Iron grating for gully trap 133 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 134 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet 135 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore 136 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 137 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-incharge and finished smooth. Granite Stone of approved shade 138 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 139 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 140 Internal work - Exposed on wall 15 mm dia. nominal bore 141 Internal work - Exposed on wall 20 mm dia. nominal bore 142 Internal work - Exposed on wall 25 mm dia. nominal bore 143 Internal work - Exposed on wall 32 mm dia. nominal bore 144 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 15 mm dia. nominal bore 145 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 20 mm dia. nominal bore 146 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 147 15 mm dia. nominal bore 148 20 mm dia. nominal bore 149 25 mm dia. nominal bore 150 32 mm dia. nominal bore 151 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work : 152 15 mm dia. nominal bore 153 20 mm dia. nominal bore 154 25 mm dia. nominal bore 155 32 mm dia. nominal bore 156 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 157 15 mm dia. nominal bore 158 20 mm dia. nominal bore 159 25 mm dia. nominal bore 160 32 mm dia. nominal bore 161 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 162 15 mm nominal bore 163 20 mm nominal bore 164 25 mm nominal bore 165 WATER HARVESTING SYSTEM 166 Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 200 mm dia Nominal bore 167 Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985 of following nominal bore sizes at site of work. 200 mm dia 168 Supply and fixing of M.S. clamp set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. 169 Providing & lowering of G.I. flange pipe B Class including rubber washer and nuts of 8 mm dia complete in all respect. 50 mm dia 170 Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well. 171 ELECTRICAL G-SCHEDULE 172 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI markedMMS ( IS:9537 P - III ) PVC conduit & its accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. 173 Short point (up to 3 mtr.) 174 Medium point (up to 6 mtr.) 175 Long point(up to 10 mtr..) 176 Wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & its accessories, round tles,18 SWG M.S. box with earth terminal, 6 A two way switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. 177 Short point (up to 3 mtr.) 178 Medium point (up to 6 mtr.) 179 Long point(up to 10 mtr..) 180 Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm FR PVC insulated unsheathed 1.1 kV grade flexible copper conductor and 1.5 sq.mm FR PVC insulated unsheathed 1.1 kV grade copper earth conductor (IS:694) of approved make double lock/ ISI marked single lock pvc casing capping & its accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 181 On board 182 Short point (up to 3 mtr.) 183 Medium point (up to 6 mtr.) 184 Long point(up to 10 mtr..) 185 S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 186 20 mm 187 25 mm 188 32 mm 189 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 190 3x 1.5 sq.mm 191 2 x 2.5 sq. mm. + 1x1.5sqmm 192 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 193 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 194 4 x 10.0 sq.mm 195 4 x 16.0 sq.mm 196 Supplying and drawing PVC jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam PE dielectric coaxial cable of approved make in existingsurface or recessed conduit/casing capping including making connections as required. 197 RG - 6 198 RG -11 199 Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS-112C &113 C of approved make in existing surface or recessed conduit/casing capping. 200 Unarmoured 2 pair 201 Unarmoured 10 pair 202 Unarmoured 20 pair 203 Unarmoured 50 pair 204 Jelly filled armoured (PIJF) 5 pair 205 Jelly filled armoured (PIJF) 10 pair 206 Jelly filled armoured (PIJF) 20 pair 207 Jelly filled armoured (PIJF) 50 pair 208 P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar masking sheet conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Double door (Three phase) Per phase isolation 209 2+8 Way 210 2+12 Way 211 Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 212 2.5 Sq. mm 4 core 213 4.0 Sq.mm 4 core 214 6.0 Sq.mm 4 core 215 10.0 Sq.mm 4 core 216 16.0 Sq.mm 4 core 217 25.0 Sq.mm 3.5 core 218 35.0 Sq.mm 3.5 core 219 50.0 Sq.mm 3.5 core 220 70.0 Sq,mm 3.5 core 221 95.0 Sq.mm 3.5 core 222 120.0 Sq.mm 3.5 core 223 150.0 Sq.mm 3.5 core 224 240.0 Sq.mm 3.5 core 225 300.0 Sq.mm 3.5 core 226 Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 227 3.5 x 25.0 sq.mm 228 3.5 x 35.0 sq.mm 229 3.5 x 50.0 sq.mm 230 3.5 x 70.0 sq.mm 231 3.5 x 95.0 sq.mm 232 3.5 x 120.0 sq.mm 233 3.5 x 150.0 sq.mm 234 3.5 x 240.0 sq.mm 235 3.5 x 300.0 sq.mm 236 4 x 2.5 sq.mm 237 4 x 4.0 sq.mm 238 4 x 6.0 sq.mm 239 4 x 10.0 sq.mm 240 4 x 16.0 sq.mm 241 Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. Hot Dipped Galvanized. 242 150mm x 50mm x 1.6mm 243 300mm x 50mm x 1.6mm 244 450mm x 50mm x 2.0mm 245 600mm x 50mm x 2.0mm 246 Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating With pipe in pipe technology with 80-100 micron G.I. coating G.I. pipe 3000 mm long , 80/40 mm , terminal 14 mm G.I. strip 247 S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 248 8 SWG copper Wire 249 25mm x 3mm copper strip 250 50mm x 6mm copper strip 251 25mm x 3mm G.I. ( Hot Dipped) Strip 252 25mm x 6mm G.I. ( Hot Dipped) Strip 253 P & F of IP20 LED Recessed/ Surface Mounted Round/ sqaure Non Dimmable Downlight with die-cast aluminum housing & Heat sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. ( supplied together with luminaire) Power consumption of =< 7w/10w/8w/12w/15w/18W with 100/500/750/1100/1250 lumens, system lumen, efficeancy of 70 lm / Watt or 100 lm / Watt output suitable to replace 1x18W/ 2x18w/2x26w CFL downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE Compliance. 254 Recessed mounting LED Downlight 18/20W 255 Surface Mounting LED Downlight 18/20W 256 P & F of IP20 LED Ceiling/ Recessed/ suspended mounting light fixture made form CRCA sheet steel housing, high purity/ transmisivity diffuser for uniform light distrubution.High efficiency driver electronics having efficiency > 85% and in compliance to IEC standards.(integral driver). Power consumption of 40 W/50W/60W, 3000/3300/4200 lumens, system lumen efficiency of 70-80 lm / Watt output suitable for 2x36W FTL/ 2x36w CFL/3x36w CFL light fixtures, life time of 50000 burning Hours with 70% intial Lumens maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE compliance. Surface Mounting 36W LED Light 2’x2’ with acrylic/ prismatic front cover 257 P & F energy efficient direct fit (Retrofit) LED tube system (with integral driver), on existing fixture. Power Consumption of18W / 36W 1500-3000 lumens, system lumen efficiency 80 lm/Watt output, life time of 50,000 burning hours with 70% initial lumen maintained. CCT 3000°K, 4000°K& 6000°K. 4 LED Tube shape fixture 18W. 258 P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. IP-65 protected LED street light luminaries LED street light fixture 150 watt 259 Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. 9 Mtr. 260 Supply, Installation, Testing and commissioning of copper wound Transformers 33/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories with off load tap changer (+5% to -10% in steps of 2.5%), winding / Top --- temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5% of the maximum total loss values for 11 KV as per energy efficiency level - 2 at basic Insulation level conferming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014. Transformers described as above and as per the following continuous rating. 315KVA 261 Supply, Installation, Testing and Commissiong of indoor type floor mounted metal clad, 11 KV Incomer VCB panel up to 630 A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 25KA/3 and IAC A-FLR for 25kA/1sec. Make of HT Panel, Vaccum Interrupter and VCB should be of same make. 11 KV / 110 Volts PT Class 0.5 accuracy and 100 VA burden with 1No. Voltmeter (0-12 KV), analog type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 12 KV on incomer, Ammeter, analog type, selector switches for ammeters, Microprocessor based numerical relay with O/L, E/F and S/C protection, Set of dual core dual ratio 3CTs of suitable ratio with sec 1 of 15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection, Multifunction Meter. 262 SITC of DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.Alternator shall be self regulated with standard Alternator Protection( Over voltage, over speed & under voltage). Engine shall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank ( with Stand) & piping, control panel (16 G) with MCCB (4P; 25 KA), Ammeter, Voltmeter, Frequency Meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having microprocessor based genset monitoring and control system mccb Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level is less than 75 db (A) at a distance of 1 Mtrs. duly certified by authorized agency. Complete in all respect of following capacity : Radiator cooled and turbo charged 250 KVA at 0.8 pf 415V 50Hz 3-?. 263 Supply, Installation, Testing & Commissioning of HT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following: (i) Provision for fixing Trivector Meter (To be supplied by DISCOMs) (ii) Provision for fixing of combined CT PT Set (To be supplied by DISCOMs) (iii)TT Block (iv) 6mm Bakelite sheet on all sides. 264 Supply, Installation, testing and commissioning of 11 KV Double Pole structure With Air Break SWITCH having following specifications : (a) DP : Double pole structure made of two nos. 9 meter long PCC poles (400 Kg) & 7 nos. MS Channel each of size 100 mmx50mmx2500mm complete with earthing of the structure as per REC standards in all respect with nuts, springs washers, clamps as required. (b) GO:Off load type gang operated 3-pole vertical flute type switch suitable for 11KV ; 400A ,3 phase, central post rotating double break isolator complete with MS hardware , copper moving & fixed contact ,assembly of 9 Nos pin insulator ,GI pipe of suitable length for operation.c) DO: 3 Nos. Horizontal/Vertical mounted 33KV Horn Gap fuse set / Drop Out fuse set, 33KV barrel fuses mounted on 6 Nos. Post insulators. (c) DO: 3nos Vertical / Horizontal mounted 11kv horn gap fuse set /drop out 11kv barrel fuses mounted on 6no pin insulators (d) LA:3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv oh linewith rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement GI bolts, nuts, washer etc as required. (e) JUMPERS: 3 no 11kv acsr conductors mounted on pin type insularors as required. GENERAL:The go shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’ 265 FIRE ALARM G-SCHEDULE 266 SITC of microprocessor based 2 - wire loop (each loop accessing 90 addressable units ) Fire Alarm Control Panel. The Panel shall be able to give pin point location of addressable units via the address code for each unit. The Panel shall also be able to automatically switch off all control switches when-ever any Alarm is triggered. The Panel shall also be able to give voice announcement to individualized speakers. The Panel shall have built in sounder, Maintenance Free Batteries of minimum 15 Ah of 24 volts capable of minimum of 12 hours with battery charger, rectifier. Loop cards, LCD unit to indicate Fire / Fault Signal of individual unit, built in-built / external printer, to log all incoming data etc complete in all respect. 2-LOOP. 267 SITC Manual Call Point complete with , Glass, hammer and chain etc as required: Analogue addressable type 268 SITC Automatic commendable Control Switches for shutting downAC Plant, Power Supply, Gas Supply etc. Response Indicators. 269 SITC Fault Isolators for isolating shorted, dead wire and loose circuits between two successive Fault Isolators with automatic resetting arrangement. Analogue addressable type. 270 FIRE FIGHTING G-SCHEDULE 271 Sub Head - I - (Wet Riser System - Pumping Equipments)SITC of electric driven Sprinkler / Hydrant pump Suitable for automatic Operation consisting of the following-(A) Horizontal multi stage Centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary sluice value on the suction side ( all items to be matching the suction side of the pump) and pressure gauge sluice value and non return valve on the delivery side side ( all of the necessary dia) and including bypass arrangement for testing of pump.(B) Squirrel cage induction motor suitable for 415 V, 50 HZ, Ac supply of below mentioned HP for the above pump ,1450 RPM T.E.F.C confirming to IP:55 and flexible coupling and coupling guard with the pump. (C) Common bed plate fabricated from mild steel channel or cast iron type1620 LPM at 70 Mtr Head ( 50 HP Motor) 272 SITC of diesel engine drive Standby Pump suitable for automatic operation consisting of the following A, B, C. .The Diesel driven pump shall be suitable for following discharge:(A) Horizontal multi stage centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, sluice value on the suction side (all items shall be matching the suction side of the pump) and pressure gauge, sluice valve and non return valve on the delivery side (all of the necessary dia) and including bypass arrangement for testing of pump.(B) Water cooled Diesel Engine developing suitable BHP for the below mentioned discharge at 1800 RPM, flexible coupling and coupling guard with the Pump, common bed plate for mounting of the Engine and Pump, d cushy foot, damping arrangement by cushy foot, Diesel Engine starting Panel for starting of the engine automatically with a unit of battery of 12/24v, 88 Ah, 13/21 plate, Exhaust Pipe of minimum 10 M length, with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumpingset, Supply, installation, testing, & commissioning of electric driven automatic pressurization pump setC) Horizontally mounted single stage centrifugal end delivery pump of below mentioned discharge with necessary sluice valve on the suction side (all items matching the suction side of the pump) and sluice valve, non return value, pressure gauge on the delivery side including by pass arrangement for testing of the working of the pumping set as required.1620 LPM at 70 Mtr Head ( 50 HP Engine) 273 SITC of Jockey pump having Squirrel cage induction motor suitable for 415 V, 50 Hz AC supply with synchronous speed of 2900 RPM T.E.F.C type confirming to IP:55 and flexible coupling and coupling guard with the pump ,Common bed plate of fabricated mild steel channel or cast iron type. 180 LPM at 70 Mtr (15 HP). 274 Supplying & Installing cylindrical type air vessel, 250 mm dia 1.5M high of thickness 6.0 mm M.S. complete with air release valve, safety valve, pressure gauge etc.along with two coats of Red Oxide and two coat of post office red enamel paint as required. 275 Providing & fixing 100mm dia pressure Gauge on Pump DeliveryLine complete with shut off cock. 276 SITC of pressure switches for Main, Jockey, and standby pumps,including necessary wiring UPTO control panel and stop valve. 277 Sub Head - II - (Hydrants System) 278 Providing and fixing single headed hydrant valves with flanged inletISI marked with 63 mm female instantaneous outlet of gun metalcomplete with blank cap and chain conforming to IS : 5290 279 Providing . 63 mm dia 15 M long reinforced rubber hose pipeconforming to IS : 636-1962, Part –A & ISI marked with Gun Metalmale & female coupling wire wound with the pipe. 280 Providing & fixing (1.0 M x .45 M x 0.6 M ) OUTDOOR HOSECABINET suitable for accommodating hydrants made of not lessthan 16 swg. M. S. sheet having central opening glazed doorincluding necessary locking arrangement, painting (one coat primer& two coats of paint ) and housing 2 Nos. RRL hose pipe, 1 Nobranch pipe. 281 Providing and fixing Swinging Drum type hose reel ISI marked 30M(L) x 20 mm (dia) rubber lined pipe with shut off nozzle of 6 mm diaincluding the cost of 25 mm dia pipe connection from riser to hosereel , all sockets, nipples, elbows and 25 mm globe valve. 282 Providing and fixing ISI marked Three Way fire Brigade Inlet to wetRiser with non return valve complete in all respects 283 Providing, fixing, jointing and testing of Heavy Gauge (C class ) MSPipe ISI marked with accessories like tees, elbows, flanged joints,reducers, compressed asbestos gaskets, nuts and bolts includingfixing the pipe with suitable flat iron strip clamps /bracket, paintingetc. Complete as required for delivery/ suction manifold relating tothe pump including painting of two coats of Red Oxide and two coatof post office red enamel paint including all civil breakages andmaking good the same : 284 200mm dia 285 150 mm dia 286 80 mm dia 287 Sub Head - III - (Piping, Valves and Accessories) 288 MS (Medium duty B class) pipe with cleaning,wrapping and coatingof the pipe as per IS; 10221 in all kind of soil at 1.0 M depthincluding excavation as required. 289 150 mm dia 290 100 mm dia 291 80 mm dia 292 Providing & fixing Butterfly valve with Cast Iron Body, Cast Iron Discand Seat of Nitrile Rubber Bonded on Bakelite with hard back to PN1.6 rating with following sizes complete with bolts, washers andcompressed asbestos gasket as required 293 150 mm dia 294 100 mm dia 295 80 mm dia 296 Providing and fixing non return valve complete with bolts nuts washers and compressed asbestos gasket etc as required : 297 200 mm dia 298 150 mm dia 299 80 mm dia 300 Carbon Dioxide type fire extinguisher with cylinder fully charge of 4.5kg capacity. 301 Providing, fixing, testing & commissioning of sprinkler heads of thefollowing type : Pendant type with quartziod bulb, operating temperature at 68 deg Cas per specifications. 302 Providing & fixing 10 SWG chrome plated brass 100 mm diadecorative flanges / escutcheon plates to be fixed at junction ofSprinkler piping with the false ceiling. 303 Sub Head - III - (Piping, Valves and Accessories) 304 Sub Head - IV (Fire Electrical Control Panel) 305 Supplying and making end termination with heavy copper lugs (pin/ring type) duty crimped with crimping tool, PVC tape etc of followingsize 306 1.5 Sq.mm 307 10.0 Sq.mm 308 35.0 Sq.mm 309 Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. 100mm x 50mm x 1.6mm 310 BOUNDARY WALL G-SCHEDULE 311 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m 312 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 313 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 314 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (As per design mix) 315 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-30 Grade Concrete. 316 Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 317 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 318 Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars 319 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Raised and cut pointing. 320 Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering. In cement mortar 1:4 (1 cement : 4 coarse sand) 321 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 322 EARTH WORK 323 Dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. 324 Earth work in excavation in open area, STP, WTP, Pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of Engineer. (Measurements for payment to be done as per standard drawings). In all type of soil Upto 3.0 m depth. 325 EXTERNAL DEVELOPMENT 326 Compacting original ground 327 Loosening upto a level of 500 mm below the subgrade level watered, graded and compacted in layers by vibratory roller 8-10 tonne to meet requirement of table 300-2 for subgrade construction as per MoRT&H specification clause 305.3.4. 328 Loosening and recompacting original ground below embankment including Loosening leveling and recompacting original ground supporting embankment to facilitate placement of of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling by vibratory roller 8-10 tonne so as to achieve minimum dry density as given in table 300-2 for embankment construction as per MoRT&H specification clause 305.3.4. 329 Providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (WMM) base course comprising of graded stone aggregate and granular material conforming to MORT&H specifications (Table 400-II) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per MoRT&H specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. 330 CEMENT CONCRETE PAVEMENTS 331 Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid manualy, compacting with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 332 Providing and laying un-reinforced, dowel jointed, plain cement concrete mix With Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. PCC M-30. 333 Providing and laying cast-in-situ cement concrete M-20 grade kerb stone channel top and bottom width 115 and 165 mm respectively, 250mm high laid with kerb laying machine, on 150 mm thick PCC M10 grade foundation (laid manually) as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. Using Concrete Mixer. 334 Providing and fixing of 60mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having minimun compressive strength of 300 kg/ sq cm. The CC paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. 335 Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge. 336 Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP4 class (with s/s ends) IS: 458 - 2003 (amended up to date) marked and pipes from 300 mm and upto 1800 mm manufactured through vertical casting process at all depths with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets, lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as per specification and / or as directed by Engineer. Note : E/w to be measured and paid separately. 300 mm internal diameter. 337 Horticulture Work 338 Grassing with Doobs grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. In rows 7.5 cm apart in either direction. 339 Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 900 mm min. height plants at site in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. 340 Ficus panda 341 Tecoma capensis ( Ratanjot) 342 Clerodendron inermii ( Choti Aari) 343 Tabernaemontana variegated ( Chandni) 344 Hamelia patens ( Firebush, Thal Kamal) 345 Hibiscus variegated ( Guddal) 346 Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 300 mm min. height ground covers at site in 0.3 m dia holes, 0.3 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. 347 Wedelia trilobata ( SunFlower Family) 348 Alternathera green (Parrot Leaf) 349 Iresine herbstii (Blood Leaf) 350 Ophiopogon Black ( Lily Turf, Mondograss) 351 Asparagus myerii (Fox Tail) 352 Lantana sellowiana 353 Rhoeo spathacea Compacta‘ ( Oyster, Boat Lily) 354 Golden duranta 355 Pennisetum setaceum (Fountain Grass)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
31.
Drinking Water Supply and Sanitation #10713558 Price Bid
Different Works Related To Water Supply Scheme At Duna & Its Adjoining Mouzas Water Supply Scheme Within Mayureswar-Ii Block Including Supply Of All Labour & Materials Underbirbhum Division, Phe Dte. ( Sl. No.11 ) - Sinking Of Tubewell- 3 Nos. ( Annexure I ) Site Preparation, Temporary Latrine, Placement & Levelling Of Rig Machine, Mast Hoisting And Casing Drilling ( Upto 6 Mtr. ) Placement Of Casing With All Allied Works Necessary To Commence Drilling Woks And Wind Up Of All Machineries After Completion Of Drilling. 2 Drilling By Direct Rotary Method Of Drilling Using9 7 / 8” Dia.Bit For Pilot Bore Follwed By Subsequently Reaming Using 12 1 / 4” Dia. , 15 Dia. And 17.5 Dia. Rock Roller Bits / Drag Bits In Consolidated, Semi Consolidated And Soft Formation Up To Required Depth Including Casing Boring And Casing Lowering As Required Includingcost Of Fuels And Lubricants Etc. As Required For Drilling.Note:1 ) Rate Only For Pilot Drilling Will Be @ 50%. Of Item Rate.2 ) Ratefor Reaming By 12 1 / 4 Dia. Bit Will Be @ 14% Of Item Rate.3 ) Ratefor Reaming By 15 Dia. Bit Will Be @ 16% Of Item Rate.4 ) Ratefor Reaming By 17.5 Dia. Bit Will Be @ 20% Of Item Rate. From 6 Mtr. To 60 Mtr. 3 From 60 Mtr. To 90 Mtr. 4 From 90 Mtr. To 120 Mtr. 5 From 120 Mtr. To 150 Mtr. 6 From 150 Mtr. To 180 Mtr. 7 Lowering The Tube Well Assembly ( Upvc Casing Pipe , Well Pipe, Strainer Along With Upvc Accessories ) Vertically In A Position With Proper Lowering Arrangement By Applying Necessary Jointing Compound Including Labour Cost For Subsequent Gravel Packing And Machine Operation Cost Etc. 8 Cost Of Consumables For Drilling Rigs And Machineries. 9 Development ( Min. 8 Hr. Continuous ) Of Tube Well By Using Suitable Air Compressor ( Min. Capacity: 600Cfm & Operating Pressure 14 Bar ) Followed By Yield Testing With Bht Pump ( Head :45 To 50Mtr., Discharge :1100 To 1000 Lpm And 25 Bhp Engine ) All Complete Includingto & Fro Transportation Cost And Cost Of Fuels, Lubricants & Labour Etc. 10 Water Sample Collection And Chemical Test Including Arsenic Test. 11 Transportation Cost Of Drilling Equipmentand Accessories Rig Machine Etc. Including Cost Of Fuel, Lubricant & Loading Unloadingthe Materials From Store / Stack Yard / Suppliers Godown And Unloading / Stacking The Same At Site. ( Upto 60.0 Km Distance ) 12 Supply And Delivery Of Upvc Pipe ( Cd ) Conforming To Is 12818:2010. ( Cipet Certified ) . ( 250 Mm Dia. ) 13 Supply And Delivery Of Upvc Pipe ( Cd ) Conforming To Is 12818:2010. ( Cipet Certified ) . ( 150 Mm Dia. ) 14 Supply And Delivery Of Upvcdeep Well Screen ( Rds ) Pipes With Ribs Conforming To Is 12818:2010 . ( Cipet Certified ) 150 Mm Dia. 15 Supply And Delivery Ofupvcreducer 250Mm X 150Mm Dia. 16 Supply And Delivery At Site Of Upvc End Cap. ( 250 Mm Dia. ) 17 Supply And Delivery At Site Of Upvc End Cap. ( 150 Mm Dia. ) 18 Supply And Delivery Of M.S. Housing Clamp 250 Mm Dia. 19 Supply And Delivery Of M.S .Centre Guide ( Special Type ) . 20 Supply And Delivery Of Washed Gravels Size Ranging From 1.80 Mm To 4.74 Mm. Conforming To Is 4097 : 1967. 21 Supply And Delivery Of Bentonite Powder Conforming To Is 6186 : 1986. 22 Electro-Logging Charge. 23 Trial Boring Of Tube-Welldrilling By Reverse Rotary Method Of Drilling Using9 7 / 8” Dia.Bit For Pilot Bore Follwed By Subsequently Reaming Using 12 1 / 4” Dia. , 15 Dia. And 17.5 Dia. Rock Roller Bits / Drag Bits In Consolidated, Semi Consolidated And Soft Formation Up To Required Depth Including Casing Boring And Casing Lowering As Required Includingcost Of Fuels And Lubricants Etc. As Required For Drilling.Note:1 ) Rate Only For Pilot Drilling Will Be @ 50%. Of Item Rate.2 ) Rate For Reaming By 12 1 / 4 Dia. Bit Will Be @ 14% Of Item Rate.3 ) Rate For Reaming By 15 Dia. Bit Will Be @ 16% Of Item Rate.4 ) Rate For Reaming By 17.5 Dia. Bit Will Be @ 20% Of Item Rate.From G.L. To 60 Mtr. 24 From 60 Mtr. To 90 Mtr. 25 From 90 Mtr. To 120 Mtr. 26 From 120 Mtr. To 150 Mtr. 27 From 150 Mtr. To 180 Mtr. 28 Cleaning Compound Premises Of Shrubs, Plants, Jungled Etc. As Per Direction Of E.I.C. 29 Soil Test For Ohr- 1 No. ( Annexure Ii ) Mobilisation Charges Of All Tools & Plants Along With Accessories, Material, Labour, Supervision Etc. At Site Of Work Required In Connection With Boring And Testing Work, Including Setting Up Boring Rigs And Shifting To Different Bore-Hole Points Etc. And Also Including Withdrawal Of Same From The Site After Completion Of Work, Complete As Per Direction Of Engineer-In-Charge. 30 Labour For Making Bore-Holes Of 150Mm To 250Mm Dia. By Any Standard Method To Any Depth Below Ground Level / Bed Level In All Kinds Of Soil Like Clay, Silt, Sand, Stiff Clay, Mixed Soils Etc. Except Rocks ( For The Purpose Of Collecting Disturbed & Un Disturbed Soil Samples, Conducting Standard Penetration Test At Suitable Intervals Etc. ) Including Preparation And Submission Of Bore-Log As Per Irc : 75 And 78 And Clause 2400 Of Specifications For Road & Bridge Works ( 5Th Revision ) , Published By Irc, And Also Including Hire Charges Of Tools And Plants Complete As Per The Direction Of Engineer-In-Charge.A ) When Casing Pipe Is Used To Prevent Collapse Of Bore Hole ( Casing Pipe To Be Finally Withdrawn ) I ) Depth 0 M To 10 M ( For 3 Nos Bore ) 31 Ii ) Depth Greater Than 10 M & Upto 20 M 32 Iii ) Depth Greater Than 20 M & Upto 30 M 33 Field Investigation :I ) Collection Of Undisturbed Soil Sample From The Bore Hole To Be Made By The Concerned Division / Party At Their Cost.A ) 0.00 - 10.0 M 34 B ) 10.00 - 20.0 M 35 C ) 20.00 - 30.0 M 36 Ii ) Collection Of Samples From The Bore Hole ( A ) Disturbed 37 Iii ) Standard Penetration Tests ( S.P.T. ) By Split Spoon Sampler In The Bore Hole As Per Is : 2131.A ) 0.00 - 10.0 M 38 B ) 10.00 - 20.0 M 39 C ) 20.00 - 30.0 M 40 Laboratory Investigation :I ) Liquid Limit As Per Is 2720 ( Part – V ) . 41 Ii ) Plastic Limit As Per Is 2720 ( Part – V ) 42 Iii ) Grain Size Analysis By Sieving As Per Is 2720 ( Part – Iv ) . 43 Iv ) Grain Size Analysis By Hydrometer Method As Per Is 2720 ( Part – Iv ) . 44 V ) Determination Of Water Content As Per Is 2720 ( Part – Ii ) . 45 Vi ) Determination Of Specific Gravity As Per Is 2720 ( Part – Iii ) . 46 Vii ) Direct Shear Test As Per Is 2720 ( Part – Xiii ) . 47 Viii ) Determination Of Unconfined Compressive Strength As Per Is 2720 ( Part-X ) ( I ) Undisturbed 48 Ix ) Determination Of Consolidation Properties As Per Is 2720 ( Part – Xiv ) . 49 X ) Tri-Axial Shear Test :A ) Determination Of Shear Strength Parameters Of A Specimen Tested Inunconsolidated Undrained Tri-Axial Compression Without Measurement Ofpore Water Pressure As Per Is 2720 ( Part –Xi ) . 50 Carriage Of All Disturbed & Undisturbed Samples From Site Of Work To The Divisional Office Or Elsewhere Including Loading And Unloading As Per Direction Of Engineer-In-Charge. Detailed Investigation. 51 Preparation And Submission Of Report In 6 ( Six ) Copies, Giving All Relevant Information Data Like Site Plan, Bore Log And Water Table, Test Results, Calculations, Discussions, Suggestions And Recommendations In Respect Of Suitable Foundation Etc. Including Determination Of Silt Factor Calculation Of Waterways And Complete Design Of Foundation Including Analysis Of Bearing Capacities And Settlements In Bound And Presentable Form Complete As Per Direction Of Engineer-In-Charge.Detailed Investigation. 52 Construction Of 300 Cum Ohr- 1 No. ( Annexure Iii ) Earth Work In Excavation Of Foundation Trenches Or Drains, In All Sorts Of Soil ( Including Mixed Soil But Excluding Laterite Or Sandstone ) Including Removing, Spreading Or Stacking The Spoils Within A Lead Of 75 M. As Directed. The Item Includes Necessary Trimming The Sides Of Trenches, Levelling, Dressing And Ramming The Bottom, Bailing Out Water As Required Complete. A ) Depth Of Excavation Not Exceeding 1500 Mm 53 B ) Depth Of Excavation For Additional Depth Beyond 1500Mm And Upto 3000Mm. ( But Not Requiring Shoring ) . 54 Bailing Out Water From Foundation Trench. This Item Should Be Executed On The Specific Direction Of The Engineer-In-Charges When He Is Satisfied In His Absolute Discretion, That This Has Not Been Necessitated Due To Any Fault On The Part Of The Contractor ) 55 Hire And Labour Charges For Shoring Work ( Including Necessary Close Plank Walling, Framing, Eucalyptus / Jhau Balla Pilling, Strutting Etc ) Complete As Per Directionof The Engineer-In-Charge For Foundation Excavation ( Vertical Surface Are In Contact With Supported Earth Is To Be Measured. ) ( This Item Should Be Executed On Specific Direction Of The Engineer-In-Charge ) .A ) Depth Upto 1.5M. 56 B ) For Additional Depth Beyond 1.5M And Upto 3.00M. 57 Earth Filling In Foundation Trenches Or Plinth With Good Earth In Lyres Not Exceeding 150Mm Including Watering & Ramming Etc Layer By Layer Complete.A ) With Earth Obtained From Excavation Of Foundation. 58 Filling In Foundation Or Plinth By Silver Sand In Layers Not Exceeding 150 Mm As Directed And Consolidating The Same By Thorough Saturation With Water, Ramming Complete Including The Cost Of Supply Of Sand. ( Payment To Be Made On Measurement Of Finished Quantity ) Do - By Fine Sand 59 Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level, And Filling Joints With Powered Earth Or Local Sand. 60 Cement Concrete With Graded Stone Chips ( 20Mm Size ) Excluding Shuttering, In Ground Floor ) Considering 30 Km Distance From Suri Rly. Yard.A ) 1:2:4 Proportion. ( In Foundation And Under Tank At Finished Gl, Plinth Protection Etc. ) 61 Controlled Cement Concrete With Well Graded Stone Chips ( 20Mm Nominal Size ) Excluding Shuttering & Reinforcement With Complete Design Of Concrete As Per I.S.456 And Relevant Special Publications, Submission Of Jobs Mix Formula After Preliminary Mix Design After Testing Of Concrete Cubes As Per Direction Of Eic. Consumption Of Cement Concrete Will Not Be Less Than 300Kg Of Cement With Super Plasticizer Per Cubic Meter Of Controlled Concrete But Actual Consumption Will Be Determined On The Basis Of Preliminary Test And Job Mix Formula. ( Using Concrete Mixture ) .Considering 60 Km Distance From Suri Rly. Yardm- 25 Grade ( With Pakur Variety. ) A ) For Works In Foundation, Basement And Upto Roof Of Ground Floor / Upto 4M. 62 B ) 1St Floor I.E. From Top Of 1St Bracing To Top Of 2Nd Bracing 63 C ) 2Nd Floor I.E. From Top Of 2Nd Bracing To Top Of 3Rd Bracing 64 D ) 3Rd Floor I.E. From Top Of 3Rd Bracing To Top Of 4Th Bracing 65 E ) 4Th Floor I.E. From Top Of 4Th Bracing To Top Of 5Th Bracing 66 F ) 5Th Floor I.E. From Top Of 5Th Bracing To Bottom Of Heal Beam 67 Controlled Cement Concrete With Well Graded Stone Chips ( 20Mm Nominal Size ) Excluding Shuttering & Reinforcement With Complete Design Of Concrete As Per I.S.456 And Relevant Special Publications, Submission Of Jobs Mix Formula After Preliminary Mix Design After Testing Of Concrete Cubes As Per Direction Of Eic. Consumption Of Cement Concrete Will Not Be Less Than 300Kg Of Cement With Super Plasticizer Per Cubic Meter Of Controlled Concrete But Actual Consumption Will Be Determined On The Basis Of Preliminary Test And Job Mix Formula. ( Using Concrete Mixture ) . Considering 60 Km Distance From Suri Rly. Yardm- 30 Grade ( With Pakur Variety. ) A ) Heal Beam And Above ( Cell Wall, Floor, Top & Bottom Ring Beam, Heal Beam ) A ) 6Th Floor 68 B ) 7Th Floor 69 Hire And Labour Charges For Shuttering With Centering And Necessary Staging Upto 4M Using Approved Stout Props And Thick Hard Wood Planks Of Approved Thickness And Required Bracing For Concrete Slabs, Beams, Column Lintel Curved Or Straight Including Fitting, Fixing And Striking Out After Completion Of Woks ( Upto Roof Of Ground Floor ) .Steel Shuttering Or 9 To 12Mm Thick Approved Quality Ply Board Shuttering In Any Concrete Work.C ) For Foundation Upto G.L. 70 Hire And Labour Charges For Shuttering For Concrete Work In Overhead R.C. Reservoir On Separate R.C. Frame Including Fitting, Fixing And Striking Off After Completion Of Work Including Staging Upto 4M Using Ply Board Or Steel Shuttering. ( Not Applicable For Resting On Roof Top ) .A ) G.L. To Top Lantern Of Ohr. 71 Hire And Labour Charges For Staging Beyond 4M With Necessary Cross Bracing And Fixtures And Removing The Same After Completion Of The Work All Complete As Per Direction Of The E.I.C. [ Mode Of Measurement :Area Of Unsupported Horizontal Projection ( Where Staging Beyond 4M Is Practically Un-Avoidable ) X Mean Height Of Staging ] Above Initial 4M. ( Dia 10.50 M. Mean Height 16M. ) 72 Reinforcement For Reinforced Concrete Work In All Sorts Of Structures Including Distribution Bars, Stirrups, Binders Etc. , Initial Straightening And Removal Of Loose Rust ( If Necessary ) , Cutting To Requisite Length, Hooking And Bending To Correct Shape, Placing In Proper Position And Binding With 16 Gauge Black Annealed Wire At Every Inter-Section, Complete As Per Drawing And Direction. I ) Tor Steel / Mild Steeli. Sail / Tata / Rinl A ) For Works In Foundation Basement Upto Roof Of Ground Floor / Upto 4 M . 73 B ) 1St Floor I.E. From Top Of 1St Bracing To Top Of 2Nd Bracing 74 C ) 2Nd Floor I.E. From Top Of 2Nd Bracing To Top Of 3Rd Bracing 75 D ) 3Rd Floor I.E. From Top Of 3Rd Bracing To Top Of 4Th Bracing 76 E ) 4Th Floor I.E. From Top Of 4Th Bracing To Top Of 5Th Bracing 77 F ) 5Th Floor I.E. From Top Of 5Th Bracing To Top Of Heal Beam 78 G ) 6Th Floor I.E. From Top Of Heal Beam To Top Ofshell Wall 79 H ) 7Th Floori.E. From Top Of Shell Wall To Rest 80 Applying 2 ( Two ) Coats Of Bonding Agent With Synthetic Multi Funtional Rubber Emulsion Having Adhesive And Water Proofing Properties By Making With Water In Proportion ( 1 Bonding Agent : 4 Water : 6 Cement ) As Per ManufacturerS Specification. 81 Extra Rate For Using Water Proofing And Plastering Admixture @ 0.2%By Weight Of Cement ( Or At ManufacturerS Specified Rate For Concrete Of Various Grades ) . 82 Supplying, Fitting, Fixing Fly / Mosquito Proof Nylon Net On Any Type Of Window, Doorshutter Frame With Necessary Fixing Arrangements Complete. 83 Supplying Fitting And Fixing Door Made With Irc Febric Mesh Of 75Mm X50mmx4.5Mmx2.7Mm On 50Mm X 50Mm X 6Mm Angle Iron Frames All Round And One 37.5Mm X 6Mm M.S. Flat Bar Over The Netting All Round Welded To Angle Iron Frame And Providing Locking Arrangements If Necessary And With Two Coats Of Synthetic Enamel Paint ( Other Than Hi-Gloss ) Fitted And Fixed With Clamps Or Haskal Doomney Etc. Complete At The Lantern Of R.C.C. Over Head Reservoir. 84 Artificial Stone In Floor, Dado, Staircase Etc. With Cement Concrete ( 1:2:4 ) With Stone Chips, Laid In Panels As Directed With Topping Made With Ordinary Or White Cement ( As Necessary ) And Marble Dust In Proportion ( 1:2 ) Including Smooth Finishing And Rouding Off Corners And Including Raking Out Joints Or Roughening Of Concrete Surface Andapplication Of Cement Slurry Before Flooring Works, Using Cement @ 1.75 Kg / Sq.M. All Complete Including All Materials And Labour.In Ground Floor 3 Mm Thick Topping ( High ) Polishing, Grinding On This Item Is Not Permitted With Ordinary Cement ) .25 Mm Thick.A ) In G.F For Plinth Protection And Under Tank Floor 85 B ) 6Th Floor 86 C ) 7Th Floor 87 M.S. Structural Works In Columns, Beams Etc. With Simple Rolled Structural Members ( E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp ( 6 ) - 1964 Connected To One Another With Bracket, Gussets, Cleats As Per Design, Direction Of Engineer-In Charge Complete Including Cutting To Requisite Shape And Length, Fabrication With Necessary Bolting, Metal Arc Welding Conforming To Is: 816- 1969 & Is: 1995 Using Electrodes Of Approved Make And Brand Conforming To Is:814- 2004, Haulage, Hoisting And Erection All Complete. The Rate Includes The Cost Of Rolled Steel Section, Consumables Such As Electrodes, Gas And Hire Charge Of All Tools And Plants And Labour Required For The Work Including All Incidental Chages Such As Electricity Charges, Labour Insurance Charges Etc. Payment To Be Made On The Basis Of Calculated Weight Of Structural Members Only In Finished Work As Per Is Specified Weight. Payment For Gusset, Bracket, Cleat, Rivets, Bolts And Nuts May Be Make By Adding The Actual Weight Of Such Items With The Weight Of Finished Structural Members Or 7% Of Weight For Finished Structural Members Weighing Not Less Than 22.5 Kg. / M. Or 15 % Of Weight For Finished Structal Members Weighing Less Than 22.5 Kg. / M. May Be Increased Allow For Bracket, Cleat, Rivet, Bolts And Nuts Etc. And No Seperate Payment Being Made For These Items, As Per Direction Of Engineer In Charge. The Rates Are Considered For A Height Of Erection 8M. / 2Nd Floor Level From The Ground. Add 1.5% Extra Over The Rate For Each Additional Floor Or 4M. Beyond Initiial 8M. Or Part Thereof.Iii ) For Built Up Sections / Srtuctural Members Of Specified Sections Weighing Not Less Than 22.5 Kg. / M 88 M.S. Gate Of Jail Type As Per Approved Design Made Of Strong M.S. Frame Work, Intermediate Stiffeners And Round / Square Bars Or Angles. M.S. Sheet ( Not Less Than 14 Gauge ) Gussets, Cleats Etc. Including Necessary Riveting, Bolting, Welding, Locking And Hanging Arrangements, Fitting And Fixing Complete As Per Direction Of The Engineer-In -Charge. 89 M.S. Or W.I. Ornamental Grill Of Approved Design, Joints Continuously Welded With M.S. Wi Flats And Bats For Winding, Drilling Etc.Fitted & Fixedwith Necessary Screw And Lugs In Ground Floor.A ) Grill Weighing Above 10 Kg / Sqm Upto 16 Kg / Sqm ( In Kg ) 90 Supplying, Fitting, Fixing900 Mm High G.I. Pipe Railing For R.C.C Stair Cat Ladder Walk Way Fabrication, Erection, Welding Of 40 Mm G.I ( Non Tata Medium ) Pipe Place At Top Of Railingand2 Nos 25 Mm Dia. G.I Pipe ( Non Tata Medium ) Placed Equally In Between Railingtop & Floor, Vertical Post Of Raillingare 40 Mm Dia. G.I Pipe ( Non Tata Medium ) Placed At 900 Mm C / C . The Each End Of The Vertical Post Is Join By The 62 Mm ( 25 Mm X 6 Mm X 0.062 M Long ) Ms Flat And 150 Mm Length ( Propes Pipes ) Are Grouted In Concrete Base Of Stair, Walk Way Etc. All Complete With Supplying Of All Materials Including Hoisting Up To The Any Height Complete With 2 Coats Of Painting With Super Gloss ( Hi Gloss ) In Any Shade Except White And Black Over A Coat Of Primer Complete As Per Direction Of E.I.C.Analysis Of Rate Enclosed In Seperate Sheets. ( Analysis Rate ) 91 Supplying At Site Hoisting, Fitting, Fixing Erecting And Building In Position Where Necessary 450Mm.Wide Ladder As Per Design Consisting Of 2Nos. M.S.Plate Of 8Mm.Thick With Necessary Base Plate 60Mm Wide; And 16Mm.Dia M.S.Round Or Square Bar As Steeps Placed @ 300 C / C Including Fabrication, Welding Drilling Etc. As Per Drawing And Direction And Finished With Two Coats Of Synthetic Enamel Painting Over A Coat Of Red Lead Primer Etc. All Complete As Per ;Direction Of The Eic 92 Supplying Fitting And Fixing In Position C.I Manhole / Pit Cover With Rim.A ) Square.I ) 600 X 600Mm ( 50Kg.Approx ) . 93 Brick Work With 1St Class Brick In Cement Morter. ( 1:6 ) In Superstructure Ground Floor ( 1:6 ) 94 Plaster ( To Wall, Floor, Ceiling Etc ) With Sand Cement Mortar Including Rounding Off Or Chambering Corners As Directed And Raking Out Joints Including Throating Nosing And Drip Course Scafolding / Staging Where Necessary ( Ground Floor ) Excluding Cast At Shipping Over Concrete Surface. Ii ) With 1:4 Cement Mortar ( 10 Mm Thick Cement Plaster ) A ) G.L. To Top Of 1St Bracing 95 B ) 1St Floor I.E. From Top Of 1St Bracing To Top Of 2Nd Bracing 96 C ) 2Nd Floor I.E. From Top Of 2Nd Bracing To Top Of 3Rd Bracing 97 D ) 3Rd Floor I.E. From Top Of 3Rd Bracing To Top Of 4Th Bracing 98 E ) 4Th Floor I.E. From Top Of 4Th Bracing To Top Of 5Th Bracing 99 F ) 5Th Floor I.E. From Top Of 5Th Bracing To Bottom Of Heal Beam 100 G ) 6Th Floor I.E.From Bottom Of Heal Beam To Top Of Ring Beam 101 H ) 7Th Floori.E. From Ring Beam To Rest 102 Plaster ( To Wall, Floor, Ceiling Etc ) With Sand Cement Mortar Including Rounding Off Or Chambering Corners As Directed And Raking Out Joints Including Throating Nosing And Drip Course Scafolding / Staging Where Necessary ( Ground Floor ) Excluding Cast At Shipping Over Concrete Surface. Ii ) With 1:3 Cement Mortar ( 10 Mm Thick Cement Plaster ) A ) 6Th Floor 103 B ) 7Th Floor 104 Supplying & Installation Of Lighting Solid Conductor Rod Of Phosphorous-Bronze Size 2M X 12Mm On The Top Dome Of The Rcc Overhead Reservoir, Laying Lightning Conductor Of 65Mm X 8Mm G.I. ( Hot Deep ) Ms Flatruns From The Roof Upto Gl Along The Shell Wall And Colume Fitted With Necessary Rust Proof Clamps, Lying65mm X 8Mm G.I. ( Hot Deep ) Ms Flat Conductorfrom Gl To Bottom Of The Earthing Main Pipe 80Mm Dia. Tata ( M ) Fitted And Fixedand Connecting With The Main Earthing Gi Pipe Of 80Mm.Dia Tata ( M ) Of 2.50M To Be Used As Earthing Electrode Driven Down To At Least 3.0M Below Gl And Filling Up With Charcoal, Construction Of Masonry Chamber Making As Per Direction Of Eic & Necessary Arrangement For Testing The Same As Per Iee Rule. ( All Work To Be Done As Specification Of Pwd ( Elec. ) Schedule. ) 105 Provision For Embossing The Name And Capacity Of The Reservoir With ( 2:1 ) Raised Sand Cement Plaster With Letter Size 30Cm. X 20Cm. On The Outside Of Shell Wall Of The Reservoir Painted Complete As Per Direction Of Eic. 106 Protective And Decorative Acrylic Exterior Emulsion Paint Of Approved Quality, As Per Manufacturer’S Specification And As Per Direction Of Eic To Be Applied Over Acrylic Primer As Required. The Rate Includes Cost Of Material, Labour, Scaffolding And All Incidental Charges But Excluding The Cost Of Primer. ( Two Coats. ) I ) Super Protective 100% Acrylic Emulsion.A ) G.L. To Top Of 1St Bracing 107 B ) From Top Of 1St Bracing To Top Of 2Nd Bracing 108 C ) From Top Of 2Nd Bracing To Top Of 3Rd Bracing 109 D ) From Top Of 3Rd Bracing To Top Of 4Th Bracing 110 E ) From Top Of 4Th Bracing To Top Of 5Th Bracing 111 F ) From Top Of 5Th Bracing To Top Of Heal Beam 112 G ) From Top Of Heal Beam To Top Of 1 / 3Rd Of Shell Wall 113 H ) From 1 / 3Rd Of Shell Wall To Rest 114 Applying Exterior Grade Acrylic Primer Of Approved Quality And Brand On Plastered Or Concrete Surface Old Or New Surface To Received Decorative Textured ( Matt Finish ) Or Smooth Finish Acrylic Exterior Emulsion Paint Including Scraping And Preparing The Surface Thoroughly, Complete As Per Manufacturer’S Specification And As Per Direction Of The Eic. ( Two Coats ) A ) G.L. To Top Of 1St Bracing 115 B ) From Top Of 1St Bracing To Top Of 2Nd Bracing 116 C ) From Top Of 2Nd Bracing To Top Of 3Rd Bracing 117 D ) From Top Of 3Rd Bracing To Top Of 4Th Bracing 118 E ) From Top Of 4Th Bracing To Top Of 5Th Bracing 119 F ) From Top Of 5Th Bracing To Top Of Heal Beam 120 G ) From Top Of Heal Beam To Top Of 1 / 3Rd Of Shell Wall 121 H ) From 1 / 3Rd Of Shell Wall To Rest 122 Neat Cement Punning About 1.5Mm Thick In Wall, Dado, Window, Ceiling, Floor, Drain Etc. 123 Priming One Coat On Steel Or Other Metal Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothing Surface By Sand Pepering Etc. 124 Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc Including Using Of A Approved Putty Etc On The Surface If Necessaryon Steel Or Other Metal Surface ( With Other Than Hi Gloss Of Approved Quality ) . I ) 2 Coats ( With Any Shade Except White ) 125 Painting With Ready Mixed Black Japan Of Approved Make And Brand Including Smoothening Surface.Two Coats. 126 Making Arrangement For Showing The Water Tightness Test Of The Rcc Elevated Reservoir By Filling With Water Upto The Maximum Level Of The Tank To The Full Satisfaction Of Eic ( Arrangements Of Water, Its Carriage And Lifting To The Tank Including Necessary Pipes, Fitting, Pumping Machinery Etc. Are To Be Provided By The Contractor With His Own Cost. ( If Water Is Supplied By The Department Rate Shall Be Reduced As Per Prevailing Departmental Rate ) ) 127 Disinfection And Washing The Tank And Pipe Connections Including Cleaning The Inside Of The Etc. Complete. 128 Hoisting, Erection , Placing Connecting With Pipes And Specials Cidf Pipes, Specials ) Securing With Building Specials Providing Stays, Clamps As Required Including Cost Of Staging Platform For The Work Etc.All Complete In All Respects As Per Drawing And Direction Of Eic.A ) 250Mm.Dia . 129 B ) 150Mm.Dia . 130 C ) 100Mm.Dia . 131 Laying Of Cidf / D.I Pipes With Specials, Valves Etc. In Trenches Including Excavation In All Sorts Of Soil, Moorum, Soft Rock And Refilling The Trenches After Laying & Jointing Of Pipes Etc. All Complete As Per Specification And Direction Of Eic.A ) 250Mm.Dia . 132 B ) 150Mm.Dia . 133 C ) 100Mm.Dia . 134 Fitting, Fixing Duct-Foot Bend Including Construction Of Cement Concrete ( 4:2:1 ) Base With Stone Chips Ofapproved Grade & Quality & Including Excavation Of Earth Etc Complete In All Respect. ( Analysis Rate ) A ) 250Mm.Dia ( Base Size 450Mm X 450Mm X 600Mm Deep ) 135 B ) 150Mm.Dia ( Base Size 450Mm X 450Mm X 600Mm Deep ) 136 C ) 100Mm.Dia ( Base Size 450Mm X 450Mm X 600Mm Deep ) 137 Hoisting, Fitting, Fixing Of Ci Bell Mouth With Puddle Collar In Rcc Work As Per Drawing Specification Complete In All Respect.A ) 250Mm.Dia . 138 B ) 150Mm.Dia . 139 C ) 100Mm.Dia . 140 Construction Of Masonry Drain 300 Mm X 250 Mm Inner Section With 1St Class 250 Mm Th. Brick Work In Cement Mortar ( 1:4 ) Over A Layer Of Single Brick Flat Soling , Sand Filling 100Mm Th. And 100 Mm Th. Weak Cement Concrete ( 6:3:1 ) With Graded Stone Ballast Pakur Variety ( 40Mm Size ) Including Earth Work In Excavation, 15Mm Th. Cement Plaster ( 4:1 ) And Neat Cement Punning All Rounding The Drain Etc. All Complete As Per Approved Design , Drawing And Direction Of The Engineer In-Charge. ( Analysis Rate ) 141 Supply And Delivery Of Different Dia.Cidf Pipe ( Class - B ) I.S: 1538 - 1976 & Specials ( Class - B ) As Per Is: 1538 - 1993 With Latest Amendment Including Loading, Unloading & Stacking Properly For Connection Of Inlet, Outlet, Overflow And Washout Line Of Ohr As Per Departmental Drawing With Specified Dia. Inclusive Of All Incidental Charges If Any All Complete As Per Direction Of The E.I.C. ( Test Certificate From The Manufacturer And Guarantee Certificate Should Be Produced By The Agency ) 142 A ) Supply And Delivery Of Cidf Sluice Valve Pn-10 Of Different Dia Make With Cast Iron Double Flanged Non Rising Spindle Sluice Valve Generally Conforing To I:S 14846-2000 With Latest Amended If Any Having Body Door Dome / Bonnet And Cover Of Cast Iron Gr.- F.G. 200 ( Ref. Is-210 ) Spindle Of Is: 6603 Gr.- 12 / Cr. 13 Non-Magnetic, Nut And Seat Rings Are Gunmetal As Per Is: 1538 Part Iv & Vi Valves Are Suitable For Maximum Working Pressure Of 10Kg / Sq.Cm. ( Seat Test ) And Body Tested To 15Kg / Sq.Cm. ( Test Certificate From The Manufacturer As Well As Inspection Certificate From Third Party Inspection, Agency To Be Arranged By Their Own Cost And To Be Approved By E.I.C. ) N.B. The Above Item Should Be Procured From The Reputed Manufacturer Viz- Kalpana, Jupiter & Upadhaya Or Similar Approved Vender List. [ With Cap ] A ) 250Mm.Dia . 143 B ) 150Mm.Dia . 144 C ) 100Mm.Dia . 145 Construction Of R.C.C. Inlet & Overflow Chamber As Per Drawing Cast With Rcc Wallwithcement Concretenot Leaner Than 1:1.5:3 With Graded 20 Mm Down Pakur Variety Stone Chips And Reforcement Having Wall Thickness 125 Mm And Complete With Plastering 15Mm Th. ( 1:4 ) With Neat Cement Finishing And As Per Direction Of The E.I.C. ( Inner Size = 600 Mm X 600 Mm X 750 Mm ) ( Analysis Rate ) 146 Applyingwate Thinable Non-Toxic Acrylic Polymer Modified Paint Coating Or Equivalent Brand Of Approved Quality 2 ( Two ) Finished Coats Over 2 Coats Of Primer Of Same Brand To The Ceiling Of Roof Dome Including Supplying Supplying Requisite Coating Materials Cleaning Of The Substrant Properly To Make It Free From Dirt, Paint, Oil And Grease Sludge, Blisters, Fungus , Moss, And All Other Undesireble Particles Using Wire Brush , Sand Paper Etc. Including Mending Good All Damages All Complete As Per Direction Of The E.I.C. 147 Supplying Hoisting, Fitting Fixing Approved Type Water Level Indicator With Copper Float, Guide Pulley, Wire Boards Etc. As Per Standard Specification And Direction And Satisfaction Of Eic 148 Site Clearence By Removing All Unserviceablematerials, Debris Etc. All Complete As Per Direction Of E.I.C. 149 Construction Of 3 Nos Pump House And Boundary Wall With Land Development ( Annexure Iv ) Earth Work In Excavation Of Foundation Trenches Or Drains, In All Sorts Of Soil ( Including Mixed Soil But Excluding Laterite Or Sandstone ) Including Removing, Spreading Or Stacking The Spoils Within A Lead Of 75 M. As Directed. The Item Includes Necessary Trimming The Sides Of Trenches, Levelling, Dressing And Ramming The Bottom, Bailing Out Water As Required Complete.Depth Of Excavation Not Exceeding 1, 500 Mm. 150 Filling In Foundation Or Plinth By Silver Sand In Layers Not Exceeding 150 Mm. As Directed And Consolidating Same By Thorough Saturation With Water Ramming Complete, Including The Cost Of Supply Of Sand. 151 Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming Anddressing Bed To Proper Level And Filling Joints With Local Sand. 152 Ordinary Cement Concrete ( 1:2:4 ) With Graded Stone Chips ( 20 Mm Size ) Nominal Size Excluding Shuttering And Reinforcement , If Any In Ground Floor As Per Relevant Is Code. ( A ) Pakur Variety 153 Ordinary Cement Concrete ( Mix 1:1.5:3 ) With Graded Stone Chips ( 20 Mm Nominal Size ) Excluding Shuttering And Reinforcement If Any, In Ground Floor As Per Relevant Is Codes. Pakur Variety 154 Earth Work In Filling In Foundation Trenches Or Plinth With Good Earth, In Layers Not Exceeding 150 Mm. Including Watering And Ramming Etc. Layer By Layer Complete. ( Payment To Be Made On The Basis Of Measurement Of Finished Quantity Of Work ) ( A ) With Earth Obtained From Excavation Of Foundation. 155 Reinforcement For Reinforced Concrete Work In All Sorts Of Structures Including Distribution Bars, Stirrups, Binders Etc. , Initial Straightening And Removal Of Loose Rust ( If Necessary ) , Cutting To Requisite Length, Hooking And Bending To Correct Shape, Placing In Proper Position And Binding With 16 Gauge Black Annealed Wire At Every Inter-Section, Complete As Per Drawing And Direction.A ) For Works In Foundation Basement Upto Roof Of Ground Floor / Upto 4 M . I ) Top Steel / Mild Steel [ I. Sail / Tata / Rinl=> Rs.-53241.00 / M; Ii. Other Than Sail / Tata / Rinl=> Rs.-51991.00 / Mt ] 156 Brick Work With 1St Class Brick In Cement Morter. ( 1:6 ) In Foundation And Plinth. 157 Brick Work With 1St Class Brick In Cement Morter. ( 1:6 ) In Superstructure Ground Floor ( 1:6 ) 158 125 Mm Thick Brickwork With 1St Class Bricks In Cement Mortar ( 1:4 ) In Ground Floor 159 Hire And Labour Charges For Shuttering With Centering And Necessary Staging Upto 4 Mtr Using Approved About Props And Thick Hard Wood Planks Of Approved Thickness With Required Bracing For Concrete Slabs , Beams, Columns, Lintels, Curved Or Straight Including Fitting, Fixing & Striking Out After Completion Of Works ( Upto Roof Of Ground Floor ) A ) 25 Mm To 30 Mm Thick Wooden Shuttering As Per Decision & Direction Of Engineer-In-Charge. 160 25 Mm Thick Damp Proof Course With Cement Concrete With Stone Chips ( 3:1.5:1 ) ) ( With Gradedstone Aggregates 10 Mm Normal Size ) And Paintingthe Top Surface With A Coat Of Bitumen Using 1.7 Kg Per Sq M Including Heating The Bitumen And Cost And Carriage Of All Materials Complete. 161 Plaster ( To Wall, Floor, Ceiling Etc ) With Sand & Cement Mortar Includgrounding Off Or Chamfering Corners As Directed A Ramming Out Joints Or Roughening Of Concretesurface By Chamfering Etc. Including Threading Noising And Drip Course Where Necessary. ( Ground Floor ) I ) With 1:6 Cement Mortar.20 Mm Thick Plaster 162 I ) With 1:6 Cement Mortar.15 Mm Thick Plaster 163 I ) With 1:4 Cement Mortar.10 Mm Thick Plaster 164 Supplying Fitting, Fixing- Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars With / Without Fixed Type Ventilators. [ The Extra Rate Admissible For The Openable Portion Only ] ( P-82, I-33 ) 165 Supplying 1.5Mm Thick M.S. Sheet Fitted And Fixed On One Or Both Faces Of M.S. / W.I. Gate Etc. With Point Welding At Not More Than150mm Apart Complete In All Respect As Per Design Including Cost Of All Labour And Materials 166 M.S. Or W.I. Ornamental Grill Of Approved Design, Joints Continuously Welded With M.S. Wi Flats And Bats For Winding, Drilling Etc.Fitted & Fixedwith Necessary Screw And Lugs In Ground Floor. ( I ) Grill Weighing Above 10 Kg. / Sq.Mtr And Up To 16 Kg. / Sq. Mtr.Rs.- 8247.00 / Qt, ( Ii ) Grill Weighing Above 16 Kg. / Sq.Mtr And Abovers.-8053.00 / Qt. 167 Applying Decorative Cement Based Paint Of Approved Quality After Preparing The Surface Including Scraping The Same Thoroughly ( Plastered Or Concrete Surface ) As Per ManufactureS Specification In Ground Floor. A ) Two Coats ( On New Cement Plaster Surface ) 168 White Washing Including Cleaning And Smoothening Surfacethoroughly.A ) 3 Coats. 169 B ) Priming One Coat On Steel Or Other Metal Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. 170 Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc Including Using Of A Approved Putty Etc On The Surface If Necessaryb ) On Steel Or Other Metal Surface ( With Other Than Hi Gloss Of Approved Quality ) . I ) 2 Coats ( With Any Shade Except White ) ( Hi Gloss ) 171 Number Plaque Of Buildings ( Plaque Size Upto 225 Mm X 225Mm ) Made Of Cement Plaster ( 2:1 ) On Face Of Wall Or Plinth , With 50 Mm Size Letters P.H.E. And The Number Of The Structure Formed Thereon ( In Sunk Type ) Including Painting The Letters Complete As Per Direction. ( Cement = 1 Kg / No ) 172 Supplying, Fitting And Fixing PeetS Valve Fullway Gunmetal Standard Pattern Best Quality Of Approved Brandbearing I.S.I. Marking With Fittings . ( Tested To 21 Kg / Sq.Cm. ) ( For Water Lines Only ) .- 15 Mm. Dia. 173 Construction Of Septic Tank Of Different Capacities As Per Approved Drawing With 1St Class Brick Work In Cement Mortar ( 1:4 ) Including Two 560 Mm Dia. R.C.C. Manhole Cover ( Heavy Type ) Of Approved Make Supplied, Fitted And Fixed In The 100Mm Thick R.C.C ( 1:1.5:3 ) Top Slab With Necessary Fittings, 20Mm Thick Cement Plaster ( 4 : 1 ) With Neat Cement Finish To The Internal Surfaces And 15 Mm Thick Cement Plaster ( 4 : 1 ) To Outside Wall Upto 200 Mm Below G.L Floor Finished With 25 Mm Thick Grey Artificial Stone Over 100 Mm Thick R.C.C ( 1:1.5:3 ) Bottom Slab Including Supplying, Fitting And Fixing All Necessry Specials, Fittings, S.W. Tees, C.I. Foot Rest Etc. Including Excavation Earth In All Sorts Of Soil, Shoring, Bailing Out And Pumping Out Water As Necessary, Ramming, Dressing The Bed And Fefilling The Sides Of The Tanks With Earth, Removing Spoils, Filling Up The Chamber With Clear Water, Removing Foreign Materials From The Chamber And Including Constructing Attached Inspection Pit As Per Approved Drawing And Connecting All Necessary Pipes, Joints Etc. With Internal Plaster Work And Artificial Stone Flooring Is To Be Done With Admixture Of Water Proofing Compound @ 0.5% By Weight Of Cement With All Costs Of Labour And Materials. Note:- ( I ) Finished Level Of Septic Tank Should Be 400 Mm. From Ground Level. ( Ii ) Height Of 50 Mm. Ventilation Pipe &Mosquito Proof Mesh, Should Be Follwed As Per Is:2470, Part I.Payment Will Be Made Separetly On The Basis Of Actual Height Based On Relevant I.S.Code. ( I ) For 10 Usersa ) With Pakur Variety. ( Sail / Tata / Rinl ) 174 Supplying, Fitting & Fixing Orissa Pattern Water Closet In White Glazed Vitreous Chinaware Of Approved Make Supplied , Fitted Fixed In Positioncomplete Excluding P Or S Trap. ( Excluding Cost Of Concrete For Fitting ) I ) 530Mm X 410 Mm 175 Supplying Fitting And Fixing10 Litre Pvc Low-Down Cisternof Conforming To I.S. Specification With Pvc Fitting Complete C.I.Make With Either Side Or Bottom Brackets Including Two Coats Of Painting To Brackets. 176 Supplying Pvc Water Storage Tank Of Approved Quality With Closed Lid ( Black ) -Multilayer. A ) 500 Litre Capacity. 177 Construction Of Circular Soak Well 2.5 Metre Deep In All Types Of Sandy Soils With Dry Brick Work Upto 1.6 Metre From The Bottom Having 150 Mm Intermediate Cement Brick Work ( 1:4 ) Band All Round And Cement Brick Work ( 1:4 ) Upto 0.90 Metre From Top With 20Mm Thick Cement Plastering ( 1:4 ) To Inside Face Upto The Depth Of Cement Brick Work, 15Mm Thick Cement Plaster ( 1:4 ) On Outer Face From Top Of The Well Upto G.L. And 6 Mm Thick Cement Plaster ( 1:4 ) On Top Of The R.C.C. Cover Slab Including Filling Bottom 1.00 Metre Of Inside Of The Well With Brick Metal ( 50 Mm To 63 Mm Size ) Including R.C.C. Cover Slab Of 100 Mm Thick With Cement Conc ( 1:1.5:3 ) With Stone Chips With Necessary Reinforcement And Shuttering Including One 560 Mm Dia. R.C.C. Manhole Cover ( Heavy Type ) Of Approved Make Supplied, Fitted And Fixed In The Cover Slab With Necessary Fittings, Making Nacessary Arrangements For Pipe Connections, Excavation Of Well Including Shoring, Dewatering And Removing The Exess Earth From The Premises As Per Direction Complete In All Respect With All Costs Of Labour And Materials. With 250 Mm Thick Dry Brick Work And 250 Mm Thick Cement Brick Work ( 1:6 ) And 1.00M Inside Dia. ( Sail / Tata / Rinl ) 178 Supplying, Fitting & Fixing Upvc Pipes A-Type And Fittings Conforming To Is:13592-1992 With All Necessary Clamps Nails, Including Making Holes In Walls, Floor Etc. Cutting Trenches In Any Soil Through Masonry Concrete Structures Et. If Necessary And Mending Good Damages Including Joining With Jointing Materials ( Spun Yarn, Valamoid / Bitumen / M-Seal Etc ) Complete. ( A ) 75Mm. Dia. 179 Supplying, Fitting And Fixing Fan Hook For Ceiling With1 Metre Long16mm Dia Rod Complete Including Mending Damages .Payment For Damage And Repair To Be Made Separately. 180 Wash Basin White Vitreous China Of Approved Make ( Without Fittings ) Supplied , Fitted And Fixed In Position On 75Mm X 75Mm X 75Mm Wood Blocks And C.I. Brackets Including Two Coats Of Painting Of C.I. Brackets. ( A ) 450 Mm X 300 Mm Size. 181 Supplying, Fitting And Fixing Approved Brand P.V.C. Connector White Flexible, With Both Ends Coupling With Heavy Brass C.P. Nut, 15 Mm Dia. ( A ) 900 Mm Long. 182 Cutting Holes And Subsequent Mending Good Damages. 183 Supplying , Fitting And Fixing 30 Mm. Thick Both Side Prelaminated Factory Made Solid Panel Pvc Door Shutter Consisting Of Outer Frame Made Out Of Ms Tubes Of 19 Gauge Thickness And Size 19 Mm. X 19 Mm. For Styles, Top And Bottom Rails, Ms Frame Shalll Have Cost Of Steelprimers Of Approved Make And Manufacture, M.S Frame Cover With 5 Mm.Thick Head Moulded Pvc C Channel Of Size 30 Mm. Thick 70Mm. Width Out Of Which 50 Mm. Shall Beflat And 20Mm. Shall Be Tapered In 45 Degree Angle Of Either Side Forming Styles, And 5Mm Thick 95 Mm. Wide Pvc Sheet Out Of Which 75 Mm. Shall Be Flat And 20 Mm. Tapered In 45 Degree On The Inner Side Toform Top & Bottom Rail And 115Mm.Wide Pvc Sheet Out Of Which 75 Mm. Shall Be Flat And 20 Mm. Shall Be Tapered On Both Sides To Form Lock Rail. Top Bottom And Lock Rails Shall Be Provided Either Side Of The Panel With 10Mm. ( 5Mm. X 2 Mm. ) Thick , 20 Mm. Wide Cross Pvc Sheet As Gap Insert For Top Rail And Botttom Rail Sheet To Be Fitted In The M.S Frame Weled / Sealed Tothe Styles &Rails With 7 Mm. ( 5Mm. + 2 Mm. ) Thick X 15 Mm. Wide Pvc Sheet Beading On Inner Side And Joint Together With Solvent Cement Adhesive . An Additional 5 Mm. Thick Pvc Strip Of 20 Mm. Which Is To Be Stuck On The Interior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Com Excluding All Necessary Hardwire As Per Direction Of The E.I.C In Ground Floor. 184 Supplying Fitting Approved Type Ventilator In Position After Cutting Holes In Walls, Setting In Cement Mortar, Mending Damages To Wall And Plaster And Two Coats Of Paint Of Approved Brand Sand Shade .Payment Of Mending Two Damages Of Wall & Plaster And Painting To Be Made Separately.R.C.C. Ventilator Of 20 Mm Thick - Upto 0.10 Sq.M. Area 185 Constructing Inspection Pit Of Inside Measurement 600 Mm X 600 Mm X Upto 600 Mm ( Depth ) With 250 Mm Thick 1St Classbrick Work In Cement Mortar ( 1:4 ) On All Sides , Bottom Of The Pit Consisting Of 100 Mm Thick Cement Concrete ( 1:3:6 ) With Stone Chips Over A Layer Of Jhama Brick Flat Soling, 15 Mm Thick ( 1:4 ) Cement Plaster To Inside Walls And Outside Walls Upto Gl And 20 Mm Thick ( 1:4 ) Plaster To Bottom Of The Pit, Providing Necessary Invert With Cement Concrete ( 1:3:6 ) With Stone Chips As Per Direction, Neat Cement Finishing To Entire Internal Surfaces, Top Of The Pit Covered With 100 Mm Thick Rcc Slab ( 1:1.5:3 ) With Stone Chips And Necessary Reinforcements Upto 1% And Shuttering Including 6 Mm Thick Cement Plaster ( 1:4 ) In All External Surfaces Of The Slab And One 560 Mm Dia Rcc Manhole Cover Of Approved Make Supplied, Fitted And Fixed In The Slab With Necessary Fittings, Necessary Earth Work In Excavation In All Sorts Of Soil, Filling Sides Of The Pit With Earth And Removing Spoils After Work Complete In All Respects With All Costs Of Labour And Materials. -With Pakur Variety. 186 Supplying , Fitting And Fixing Cast Iron P Or S Trap Conforming To I.S. 3989 / 1970 And 1729 / 1964 Including Lead Caulked Joints And Painting Two Coats To The Exposed Surface. ( Painting To Be Paid Seperately ) .- S Trap - 100 Mm. 187 Supplying, Fitting And Fixing Alloy Iron With Brass Spindle Bib Cock / Stop Cock Of Approved Brand And Make, Spray Painted And Tested To 21 Kg Per Sq.Cm. - 15 Mm. Dia. 188 Supplying, Fitting And Fixing Approved Patent Vent Cowl I.C.I. Conforming To I.S.S And Painting Two Coats To The Exposed Surface With Approved Paint Complete. ( Payment Of Painting Will However Be Paid Seperately ) .- 100 Mm Dia. 189 Supplying, Fitting And Fixing Pillar Cock Of Approved Make. A ) I ) Cp Pillar Cock-15 Mm ( Equivalent To Code No-507 & Model - Tropical / Sumthing Special Of Essco Or Similar Brand ) . 190 Earth Work In Filling In Foundation Trenches Or Plinth With Good Earth In Layers Not Exceeding 150 Mm. Including Watering And Ramming Etc. Layer By Layer Complete. A ) With Carried Earth Arranged By The Contractor Within A Radius Of 3 Km. Including Cost Of Carried Earth. 191 Laying For Rising Main & Distribuition System With Fhtc ( Annexure V ) Carrying Ci / Di Pipes With Specials And Valves And Lowering Placing In Position And Laying Carefully Inside The Trenches In Proper Alignment And Gradient Etc.Including Earth Work Inexcavation Of Adequate Width As Per Specification Having Min. Clear Cover From Top Of Pipe Is 1.10Mtr. Below Existing Ground Level In Any Kind Of Soil Including Mixed With Boulder, Road Sub-Grade And Its Flank, But Excluding Moorum And Laterite And Stone Etc.Without Damaging The Exisiting Telephone / Electric Cableetc. ( Incaseof Damaged If Any Type Of Cable Line During Excecution , Necessary Damaged Charges As Applicable By The Respective Authority Will Beborne By The Agency In His Own Cost ) Preparing The Bottom Surface For Continuous Bedding Of Pipe Line And Laying Pipes, Fitting, Fixing Specials And Valves With Bailing Out Water If Any Including Carriage Of Pipes, Specials And Valves From Local Deptt.Store Within 8Km And Back Filling The Trenches With Excavated Earth In Layers To Original Condition As Per Specification And Direction Of Eic. The Surplus Materials After Execution Of Work Are To Be Return To The Deptt. Store.N.B: I ) Any Deviation From Required Clear Cover Of 1.10Mtr., Due To Site Adverse Condition, Prior Permission Is To Be Obtained From The Eic In Exceptional Situation And Payment Will Be Made On Prorate Basis Over The Rate Of Entire Item Ii ) No Payment Will Be Made Without Hydraulic Test Of The Pipe Line Either Part Or Full Iii ) Thepipes, Specials And Valves , Rubber Gasket Will Be Supplied Deptt. Free Of Cost.A ) 150Mm Dia. 192 B ) 200Mm Dia. 193 C ) 250Mm Dia 194 Making Rubber Gasket Joint To Ci / Di Pipes Maintaining Proper Alignment Level Etc. By Mechanical Arrangement With Or Without Using Mobile Cranes Where Necessary And With Help Of All Other Equipments Tools And Tackles Etc. As Required Providing Lubricants Of Approved Quality And Direction Of Eic. ( Rubber Gasket Will Be Supplied Deptt. Free Of Cost ) B ) 150Mm Dia. 195 C ) 200Mm Dia. 196 D ) 250Mm Dia 197 Making Flange Joint To Di / Ci Pipes, Specials And Valves Where Necessary With Supply Of Required Rubber Insertion And Nut Bolts, Washers Etc. Of Approved Quality And Type All Complete As Per Specification And Direction Of Eic ( Nut And Bolts Shall Be Of Tata / Gkw Rate ) .A ) 250Mm Dia 198 B ) 200Mm Dia. 199 C ) 150Mm Dia. 200 E ) 100Mm.Dia . 201 Cutting Di Pipe ( All Class & Type ) To Required Length With Cutting Device Etc. And Grinding The Cutting Portion With File As Per Direction And Satisfaction Of Eic.B ) 150Mm.Dia.To 200Mm.Dia Pipe 202 C ) 250Mm.Dia.To 350 Mm.Dia Pipe 203 Chamfering The Spigot End Of All Type / Class Of Di Pipe For Proper Using Of Push Joint By Means Of Grinder Set At Site For Proper Joint Etc. All Complete As Per Direction Of Eic.B ) 150Mm Dia. 204 C ) 200Mm Dia. 205 D ) 250Mm Dia 206 Filling The Pipe Line With Water, Testing Hydraulically As Per I.S 3114-1965 ( Article-6 ) In Section Of A Length Not Exceeding 500Mtr. For Head Of Pressure As Per Specification Including Supplying Installing And Fixing All Equipments Such As Diesel Pump Set, Blank Flange, Pressure Gauge, Valve, Pressure Pump And All Other Tools And Plants Including Drilling Topping And Plugging Of Necessary Holes To Pipes, Blocking Ends Providing Temporary Thrust Block And Subsequent Blocking Of Holes And Other Jointing Materials And Dismantling And Removal Of The Same Including Disposal Of Water Etc. All Complete As Per Specification And Direction Of Eic. The Rate Is Inclusive Of Cost Of Requisite Water To Be Arranged By The Contractor ( Recovery Rate Of Water @ Rs.10.00 / M3, If Contractor Used Water From Deptt. Source ) .A ) For Ci / Di Pipe.A ) 150Mm Dia. 207 B ) 200Mm Dia. 208 C ) 250Mm Dia 209 B ) For Upvc / Hdpe Pipea ) 50Mm ( Od ) 210 B ) 63Mm ( Od ) 211 C ) 75Mm ( Od ) 212 D ) 90Mm ( Od ) 213 E ) 110Mm ( Od ) 214 F ) 125Mm ( Od ) 215 G ) 140Mm ( Od ) 216 H ) 160Mm ( Od ) 217 I ) 180Mm ( Od ) 218 J ) 200Mm ( Od ) 219 K ) 225Mm ( Od ) 220 Cleaning Thoroughly The Inner Surface Of Pipe Line Including Specials And Valves By Flushing With Water And Subsequently Disinfection Of The Same Pipe Line By Flushing Again With Water Containing Bleaching Powder Resulting In Residual Chlorine Not Less Than 15Mg / Ltrs. After 24Hrs. Of Such Filling Including Laboratory Testing Of Water Samples Obtain From The Disinfested Pipe Line And Disposal Of Water From The Pipe Line After Completion Of The Work. The Rates Including Of Cost Of Requisite Water To Be Arranged By The Contractor ) ( The Rate Of Water @Rs. 10 / M3 May Be Recovered, If The Contractor Used Water From Deptt. Source ) .A ) For Ci / Di Pipe.B ) 150Mm Dia. 221 C ) 200Mm Dia. 222 D ) 250Mm Dia. 223 B ) For Upvc / Hdpe Pipea ) 50Mm ( Od ) 224 B ) 63Mm ( Od ) 225 C ) 75Mm ( Od ) 226 D ) 90Mm ( Od ) 227 E ) 110Mm ( Od ) 228 F ) 125Mm ( Od ) 229 G ) 140Mm ( Od ) 230 H ) 160Mm ( Od ) 231 I ) 180Mm ( Od ) 232 J ) 200Mm ( Od ) 233 K ) 225Mm ( Od ) 234 Submission Of Complete Detailed Drawing Of Distribution System, Rising Main Etc. After Execution Of Work Showing Position Of Different Types Of Valves, Fittings / Specials Sluice Valve Chamber With Location, Node To Node Wise In The Sanctioned Drawing As Completion Drawing Of The Water Supply Scheme As Per Direction And Satisfaction Of Eic. The List Of Dia Wise Fitting / Specials, Different Pipes ;Of Valve Used In The Rising Main Should Be Shown In The Completion Drawing ( Not Separate ) With Verified By Sae & Ae In-Charge Of The Scheme. The Above Drawing Will Be Submitted In 5 Copies. 235 Bituminous Pucca Road ( Approx. 450Mm Depth ) Cutting By Using Gaiti, Chisel, Hammer Etc. And Picking Uip The Withdrawing Excavated Materials And Remove The Same Within Distance Of 30Mtr. At Least All Complete For Fixing / Crossing All Dia Of Pipe Line As Per Direction Of Eic 236 Dismantling All Type Of Plain Cement Concrete Works, Stacking Serviceable Materials Of Site And Removing Rubbish As Directed Within A Lead Of 75Mtr. For Laying All Dia Pipe Line In Ground Floor, Upto 150Mm Thick.A ) Upto 150Mm Thick 237 B ) Above 150Mm Thick 238 Construction Of Different Dia Sluice Valve / Air Valve / Washout Chamber In Different Sizes For Village Road Where Light Traffic Run And For Main Road Where Heavy Traffic Run As Deptt.Approved Drawing With 25Cm Thick Brick Work ( 1:6 ) Over Cement Concrete ( 4:2:1 ) Over A Single B / F Soling Over150mm.Thick Sand Filling In Foundation Including Earth Work In Excavation And Disposal Of Excess Earth From Work Site With Rcc ( 1:1.5:3 ) Cover Slab 100Mm / 150Mm Thick Slab On Top Of Chamber With 1% Reinforcement Inrcc Cover Slab With Necessary Opening For Operation Of Valve All Complete Including Cost Of Labour & Materials As Per Departmental Dwg. [ Reinforcement Type:- Other Manufactuerers Not Specified ] I ) 80 Mm To 150 Mm Dia Pipe 239 Ii ) 200 Mm Dia Pipe 240 Iii ) 250 Mm Dia To 350Mm Dia Pipe 241 Making Holes In Two Sides Of Wall Of Culvert / Drain Or Any Other Structuresin Any Places For Laying Any Dia Pipe Line Within Structures Intwo Sides Of Wall Of Culvert / Drain / Any Structure At Any Places And Mending Good Damages All Complete As Per Direction Of Eic. 242 A ) Construction Of Rcc Street Stand Post ( 700Mm Height ) Of Rcc ( 1:1.5:3 ) Footing Over 75Mm Thick 4:2:1 P.C.C Over A Single B / F Soling With 1% Reinforcement, Connected With Saddlepiece & 15Mm Dia Brass Ferrule With Supplying Fitting, Fixing 15Mm Dia G.I. Nipple, G.I.Socket, G.I. 200Mm X 150Mm Reducing Elbow And 20Mm Dia Gi ( M ) Tata Pipe Of ( Avg. ) 2.6Mtr. Long And One 15Mm Dia Alloy Iron With Brass Spindle Bib Cock With Socket And 20Mm G.I. Elbow 2Nos. With 15Mm Gi ( M ) Tata Pipe Of 0.225Mtr. For Connection Of Stand Post To Distribution Line As Per Deptt. Design And Drawing As Per Direction Of Eic Along With Construction Of Platform Of Size Cc Platform ( 1:2:4 ) Over A Single B / F Soling Below G.L Over 150Mm.Thick Sand Filling, Neat Cement Finish Over Platform And Inner Side Of Band And 15Mm Thick Cement Plaster ( 4:1 ) On Top Of Platform Band And Outside Upto G.L. As Per Deptt. Drawing And As Per Direction Of Eic 243 Supplying Hdpe ( Materials Grade Pe-80 ) Pipes Conforming To Is 4984-1995 With Latest Revision & Amendments If Any With Necessary Hdpe Specials ( Excluding Cost Of Cidf Valves ) Including Labour Charges For Earth Work In Excavation In Any Kind Of Soil Including Mixed Soil With Boulder, Road Sub-Grade And Aits Flank But Excluding Moorum Laterite Or Sand Stone / Hard Rock Cutting With Chisel Required Including Cutting Road Flank / Brick Pavement Etc. Without Damaging The Exisiting Telephone / Electrical Cable Line Etc. ( In Case Of Damage Of Any Type Of Cable Line By The Agency At The Time Of Execution Necessary Damage Charge As Applicable By The Respective Authority Will Have To Be Brone By The Agency At His Own Cost ) Upto The Depth ( Av. ) So As To Maintain 1.10M.Earth Cushion From Top Of The Pipe Upto G.L. Including Loading Unloading Carrying Lowering Laying Fitting Fixing Carefully Pipes, Valves And Specials With The All Types Of Jointing Materials In Trenches Maintaining Proper Levels And Alignment Jointing The Pipes And Specials By Butt Welding / Adopting Suitable Method ( But Weld Jointing With Help Ofhydraulic Tack And Trimming Machines, Hitter Etc. For Reaching At Necessary Melting Point Of Hdpe Pipe So That Joint Can Be Monolithic ) So As To Facilitate The Maintenance Of Pipe Line Locally As Per Conventional Method In Future. ( A ) Pressure Rating : Pn 6Ii ) Laying Of Pipe Line Including Cost Of Pipe & Fittings / Specials Butexcluding Cost Of Valvesa ) 50Mm ( Od ) 244 B ) 63Mm ( Od ) 245 C ) 75Mm ( Od ) 246 D ) 90Mm ( Od ) 247 E ) 110Mm ( Od ) 248 F ) 125Mm ( Od ) 249 G ) 140Mm ( Od ) 250 H ) 160Mm ( Od ) 251 I ) 180Mm ( Od ) 252 J ) 200Mm ( Od ) 253 K ) 225Mm ( Od ) 254 Providing Fhtc From The Existing Cl / Dl / Upvc / Hdpe / Gl / Ac Distribution Pipeline By Installing 10 Mm Nb Gun-Metal Ferrule Conforming To Is 2692:1989 With Latest Amendments On The Said Pipeline With Supply, Fitting & Fixing Of All Other Accessories Like Saddle Piece Of Required Size To Fit The Existing Distribution Pipeline, Specials, Nut & Bolts, Rubber Sheet, Washers Etc And Supply & Laying Of 15Mm Nb Pvc ( Schedule 80 ) / 20Mm Od Hdpe ( Peioo, Pn16 ) Pipe ( Average 15M Length ) With All Necessary Specials 1.0 Metre Below The Ground Connecting The Ferrule Including Cutting Trenches In All Sorts Of Soil And Filling Up Trenches As Per Direction Of The Engineer-In-Charge And Upto A Point Just Inside The Premises Of The Household Or As Directed By Eic. Supply And Installation Of A 15Mm Dia. Alloy Iron Bib Cock ( Tested To 21 Kg / Cm2 ) Above 1.0 Mtr. From Ground, An Alloy Stop Cock Of 15 Mm Dia. With Brass Spindle ( Tested To 21 Kg / Cm2 ) To Be Fitted In A Position As Directed By E.I.C. G.L Pipe Of Tata Make ( Medium Duly ) Of 2 Metre Length With All Necessary Specials To Continue From The End Of The Hdpe / Pvc Pipe And Upto 1.0 M Above Ground Within The Premises Of Household.Note : 1. Pvc Pipe Shall Of Schedule 80 ( Medium Duty ) Conforming To Astmd-1785 And Threaded To Match With Gi Pipe As Per Is: 1239 ( Part-I ) .2. Rate Is Exclusive Of Supply And Delivery Of 10Mm Nb Gun Metal Ferrule.3. Payment Of Supply And Laying Of 15Mm Dia Nb Pvc ( Schedule 80 ) Or 20Mm Od Hdpe ( Pe 100, Pn 16 ) Pipe With All Necessary Specials 1.0M Below The Ground Will Be Made On Actual Measurement Basis. The Rate Of This Item Is Rs. 117 / -Per Metre.A ) Upto 10M Length 255 B ) Above 10M Upto 20M Length 256 Colection Of Household Details As Per Prescribed Formatthrough Mobile App / Hard Copies Including Geo Referance As Diected By E.I.C And Submission Of The Same To The P.H.E Dte.In Soft Copies. 257 Ordinary Cement Concrete ( Mix 1:2:4 ) With Graded Stone Chips ( 20 Mm Nominal Size ) Excluding Shuttering And Reinforcement, If Any, In Ground Floor As Per Relevant Is Codes.A ) Pakur Variety 258 Cost For Boring Any Type Of Soil By Augor Boring ( Horizontal ) With Water Jet System Including Hire Charges Of Machine, Tools & Plants, All Complete With All Labour And Supply Of Water Etc. As Per Specification And Direction Of Eic.I ) 80Mm To 100Mm Dia. 259 Ii ) 125 Mm To 200 Mm Dia 260 Supplying, Fitting And Fixing In Position G.I. Pipes Of Tata Make For Underground Works With All Necessary Accessories, Specials Viz.Socket, Bend, Tee, Union, Cross, Elbow, Nipple, Short Piece Etc.Including Cost Of All Materials, Jointing Materials , Cutting Pipes, Making Threads, Cutting Trenches Upto 1.5 Metre Below Surface In All Sorts Of Soil And Refilling The Same As Directed With Two Coats Of Painting On G.I. Pipes And Specials With Bituminous Paint Complete In All Respect. ( Payment Will Be Made On The Centre Line Measurement Of The Total Pipe Line Including All Specials No Separate Payment Will Be Made For Accessories, Specials.Payment For Painting Will Be Made Seperately ) ( S & P Schedule, Page-2 ) H ) ( Ii ) 80 Mm Dia. Medium Quality. 261 Supplying, Spreading And Consolidating Stone Dust To A Depth Of 100 Mm And Above At Desired Density And C.B.R. As Per Specification With Power Roller To Proper Gradient And Camber Including Watering As Necessary, And Lighting, Guarding, Barricading And Making Adequate Earthen Bundh Where Necessary To Protect The Edges And Curing With Water For 2 To 3 Days, Mending Cracks And Depressions By Rolling Where Necessary Including All Incidental Charges Of Roller, Cost Of Fuel & Lubricants Complete As Per Specification. ( Ref ; Pwd Sor 17 , Page No 242 , Item No 4.06 ) 262 Carriage Of Different Type Of Departmental Pipes From Divisional / Sub-Divisional Store To The Work Site By Truck Including Loading, Unloading, Stacking Etc. Including Cost Of Fuel, Lubricant And Also Cost Of Driver, Helper Etc. And All Other Taxes And Charges As Applicable As Per Direction Of Eicf ) Above 40 Km Upto 50 Km 263 G ) Above 50 Km ( Extra Cost Per Km ) Extra 50 Km ( 4 Nos Truck X 50 Km Each = 200 Km )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
32.
Housing Urban and Rular Development #10651061 Price Bid
Construction Of Block Public Health 15Th Cfc-Block Public Health Buildings 2023-2024 Construction Of Block Public Health 15Th Cfc-Block Public Health Buildings 2023- , 1.Construction Of Block Public Health Unit Building In Nallur At Arapallam Pt , Earthwork Excavation For Foundation (For Narrow Excavation) To Full Depth As Per Designed In All Soils And Sub Soils Except Soft Disintegrated Rock Not Requiring Blasting And Hard Rock Requiring Blasting And Bailing Water Wherever Necessary. Refilling The Sides Of Foundation With Excavated Earth Other Than Sand In Layers Of Well Rammed And Compacted And Depositing The Surplus Earth In Places Shown By The Departmental Officers With An Initial Lead Of 10M And Initial Lift Of 2M And Clearing And Leveling The Site Etc. Complete Complying With Standard Specification. , Supplying And Filling In Foundations And Basement With Fillingm Sand In Layers Not Exceeding 15 Cm. Thick, Well Watered ,Rammed And Consolidated Etc. Complete Complying With Standard Specifications. , Plain Cement Concrete 1 : 4 :8 ( One Part Of Cement, Four Parts Of Sand And Eight Parts Of Hard Broken Stone ) Using 40 Mm Gauge Hand Broken Hard Broken Granite Stone Jelly Complying With Standard Specifications In Foundations And Basement. , Refilling The Approved Good Quality Earth In Plinths, Area Development Etc. Wherever Specified In Layers Is Not Exceeding 200 Mm Thick, With Available Earth At Site. , Supplying And Filling Of Good Earth Filling Locally Available Earth Transported From The Outside Including Consolidation,Leveling Specifiedin Layers Of Not Exceeding 200 Mm Thick., Etc. Complete. , Supplying And Erecting Centering And Shuttering For Soffits Including Necessary Supports And Strutting Up To 3 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At About90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification.(Payment For Centering Shall Be Given After The Concrete Is Laid). , Upto Basement , Ground Floor , Design Mix Concrete , Providing And Laying In Position Machine Batched, Machine Mixed And Machine Vibrated Design Mix Cement Concrete Of M25 Grade For Reinforced Cement Ratio With Plasticizer Using 20Mm And Down Concrete Structural Elements Under Controlled Water Graded Machine Broken Granite Stone Jelly Excluding The Cost Of Centering And Shuttering And Reinforcement But Including Curing, Fixing, Fan Clamps Etc., As Per Standard Specification And As Directed By The Depart- Mental Officers Comple.-1M3 , Foundation & Basement , Ground Floor , Steel - Fe 500 D: Supply, Fabrication And Placing Of Reinforcement Steel Of High Yield Strength Ribbed Bars Of Various Diameters And Grade Conforming To Is 1786 For Reinforced Concrete Work. The Work Includes Recoiling, Straightening, Cutting, Bending, Fabricating, And Placing In Position, At All Levels Including Lead And Lift, According To Drawings, Specifications Etc. Complete And Supply & Use Of 18G Black Annealed Binding Wire Double Fold To Tie The Bars In Position And Providing Precast Cement/ Pvc Cover Blocks For Main Reinforcement To Ensure Specified Cover And Complete., Including All Labor Charges Etc As Directed By Departmental Officers. , Brick Work In Following Cement Mortar 1:5 Using Best Quality Country Bricks Of Size 83/4 X 41/4 X2 3/4 For Foundation And Basement Including Curing Etc., Complete Complying With Standard Specification. Including Scaffolding Curing Cost Of Reinforcement Etc. All Complete As Per Specifications And Drawings As Directed By The Engineer In-Charge. , Foundation Basement , Ground Floor , Brick Partition Walls Of 11.50Cm Thickness Using Best Quality Country Bricks Of Size 83/4 X 41/4 X2 3/4In Cement Mortar 1:3 (One Cement And Three Sand) Using Hoop Iron Reinforcement If Found Necessary Including Curing Etc. Complete And As Directed By The Departmental Officers. (Hoop Iron Reinforcement Will Be Measured And Paid For Separately). , Groundfloor , Plastering Work , Providing And Applying 10 Mm Thick Cement Plaster In Cement Mortar 1:3 ( One Part Of Cement And Three Parts Of Sand ), To Finishing The Exposed Surfaces Of R.C.C. Items Of Works Such As Roof (Or) Floor Slabs, Beams, And Sun Shades Etc.To Correct Plane And Level Including Scaffolding, Hacking Of Surface, Chiselling The Undulated Surface Wherever Necessary And Curing Etc., All Materials And Labour Complete In All Respects Including All Lead, Lift And Descent And As Directed By The Enineer In Charge. This Rate Includes The Cost Of Providing Cement Mortar Beadings For Sun Shades, Steps,Landing Slabs, Elevation Etc. Complete Complying With Standard Specifications. , Providing & Applying 12 Mm Thick Cement Plaster In Cm 1:5 (1 Part Of Cement: 5 Parts Of Sand) To Walls Internally In Single Coat At All Levels To Correct Line And Level Including Chicken Wire Mesh At All Joints Of Brick And Concrete Surfaces With Minimum Overlap Of 150 Mm In All Directions, Scaffolding, Rounding Off Or Chambering Of Corners, Offsets, Fin/ Bands, Projections, Etc. And Cleaning Of Surface, Raking Out Joints, Roughening Of Surface,Chiseling The Undulated Surface Wherever Necessary And Curing, Etc., All Materials And Labor Complete In All Respects Including All Lead, Lift And Descent Andas Directed. , Flooring And Dadooing , Paving The Floor With Best Quality Vertified Tiles Of Size 600 X 600 X 8Mm Of Approved Color, Shade And Quality Laid In Cement Mortar 1:3 (One Cement And Three Sand) 20Mm Thick In All Floors And The Top Pointed With The White Cement Mixed Same Color Pigments Etc., Complete Complying With Standard Specification.(The Make And Brand Of The Tiles Should Be Got Approved By Executive Engineer Before Use On Works).Basic Cost-Rs.776/Sq.M , Flooring With Following Ceramic Tiles Of Size 305 X 305 X 6 Mm Laid Over 20 Mm Thick Cement Mortar 1:3 (One Cement And Three Sand)Base Mortar Over The Existing Slab / Floor Including Cutting The Tiles To The Required Size With Special Cutter Wherever Necessary, Laying In Position And Pointing With White Cement Mixed With Colouring Pigment At The Rate Of 0.3 Kg. / Sq.M. Etc., Complete Complying With Standard Specification.(The Make And Brand Of The Tiles Should Be Got Approved By Executive Engineer Before Use On Works).Basic Cost-Rs.464/Sq.M , Dadooing The Walls With Coloureddadooing Ceramic Tiles Of Size 150Mm X 150Mm X 6Mm Approved Size , Quality And Colour Set In Cm 1 : 2 - 10 Mm Thk. And Pointed With Suitable Cement Including Finishing The Joint And Pointing Flesh With Walls And Tile Surfacein All Floors At The Rate Of 0.40 Kg /Sqm Etc. Complete. , Paving The Floor With Pre-Polished Concrete Anti-Skid Step Tiles (Required Shape And Design) Of 20Mm Thick Of Approved Quality And Colour Laid In Cement Mortar 1:3 (One Cement And Three Sand) 20Mm Thick And Pointed With White Cement Mixed With Colouring Pigment At The Rate Of 0.40 Kg. / Sq.M., Curing, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers.(The Make And Brand Of The Tiles Should Be Got Approved By Executive Engineer Before Use On Works). , Providing, Fabricating And Fixing M.S. Grillswindows,And Ventilator, Gates, Ladders, Rail Pipes, Nosing Angles, With M.S.Lugs In Staircase Steps Etc., Made Out Of M.S Rods, Flats, Angles, Pipes, Channels Etc. Including Necessary Fixtures Complete As Per Drawings And Specifications And As Directed By The Engineer. , S.S Handrail , Manufacturing,Supplying And Fixing Of Stainless Steel Handrails For Staircase Using 50Mm Dia 304L Grade Stainless Steel Pipe Of 1.6Mm Thick At Required Locations To A Height Of 900Mm From Finished Floor Level Welded To 38Mm Dia Stainless Steel Pipe Post Of 1Mm Thick As Vertical At 900Mm Centre With 2 Nos Of 25Mm Dia Intermediate Horizontal Stainless Steel Pipe Of 1.6Mm Thick In Between.The Vertical Pipe Has To Be Welded To The 100 X 100 X 6Mm Ms Base Plate Encased In The Base Concrete.The Rate Is Inclusive Of The Charges For Cutting, Bending, Welding, Grinding, Polishing, Conveyance,Electrical Charges,Ect.Complete. , Supply And Fabrication Of Upvc Doorincluding Cost And Conveyance Of All Charges Etc Complete. , Solid Pvc Door Shutters Toilet Door Using 19 Gauge 19Mm Ms Square Tubes For Styles And Outer Frames.15Mm Ms Square Tubes For Top, Lock And Bottom Rails.The Steel Tubes Shall Be Covered With 5Mm Thick Solid Pvc Sheets.Shutter Using 5Mm Thick Solid Pvc Sheets For Panelling Shall Rigidly Fixed In Position Including Necessary Furniture And Fittings.The Over All Size Of Styles Shall Be 50Mm X 30Mm.The Over All Size Of Top Rail, Lock Rail And Bottom Rail Shall Be 75Mm X 30Mm.The Over All Size Of Frames Shall Be 50Mm X 45Mm, With Suitable Rabate For Housing The Shutter. , Upvc Windowsupplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride) Windows Of Casement Type (Open) From The Profile The Size Of Outer Frame 60Mmx58mm And Shutter Profile Are Reinforcement With G/1Mm 125Gsmand 100% Corrosion Free, The Profiles Are Multi Chambered Sectionwith Wall Thick Of 2Mm. The Epdm Rubber (Black Color) Covered With Over All The Edges Of Frame And Shutter The Shutter Will Be Provided With Espag Multi Power Points Locks And Also It Operates As Handle. The Corners And Joints Should Be Welded And Cleaned. Radiations Free Pin Headed Or Plainglass 4Mm Thick Should Be Provided To The Shutter And It Should Not Allow Leakage Of Water Even At Most Ranging Storms And Shouldhave Key Lockable Action, Security Protective Hinges, Strong Lockingsystems And As Per Sizefor Arrestingnoise And Energy Loss. , Upvc Ventilator: Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride)Louvered Ventilators Of From The Profile The Size Of Outer Frame 60X58mm And Shutter Profile The Size Of 60X78mm Both Profile Size Of 60X78mm Both Profiles Are Reinforced With Gi/1Mm 125Gsmand 100% Corrosion Free , The Profile Are Multi Chambered Sections Withwall Thick Of 2Mm. The Epdm Rubber (Black Color) Covered With All Over The Edges Of Frame And Shutter. The Corners And Joints Should Be Welded And Cleaned. Radiation Pin Headed Glass 4Mm Thick Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Around The Frame. The Ventilator Should Be Got Approved From The Executive Engineer Before Use On Work. , Painting Work , Painting Two Coats Of Synthetic Enamel Paint Of Approved Colour And Make Over One Coat Of Anti Corrosive Zinchromite Primerover New Wood / Steel Work, Suitably Prepared For Receiving The Paint By Surface Scraping, Rubbing Applying Filler Etc. Including Cost Of Filler, Primer, Paint All Complete As Per Drawings And Specifications. , Supplying And Painting The Walls With Two Coats Of Oil Bound Distemper Over One Coat Of Water Based Cement Primer Including Cost For Distemper, Primer, Cleaning And Scrapping The Walls, Rendering The Wallssmooth With Necessary Putty, Brushes, Scaffolding Arrangements, Labour Charges, Etc., As Per Standard Specification.(The Colour And Shade Of The Distemper Shall Be Got Approved By The Executive Engineer Before Use Of Work). , Painting Two Coats Of Newly Plastered Wall Surface With Ready Mixed Plastic Emulsion Paint Of First Class Quality And Of Approved Colour Over A Priming Coat Including Thorough Scrapping, Clean Removal Of Dirt, And Including Necessary Plaster Of Paris Putty, Wherever Required Etc., Complete Complying With Standard Specification. , Weathering Course Concrete Using Best Quality Broken Brick Jelly Of 20 Mm Uniform Gauge In Pure Slaked Lime ( No Sand To Be Used ( Over The Rcc Roof Slab In The Proportion Of Brick Jelly To Lime Being 32 : 121/2 By Volume Laid Over In Single Layer And Consolidated To The Required Slope And Finished Thickness And Beating The Concrete With Wooden Beaters Of Approved Pattern, Keeping The Surface Constantly Wet By Sprinkling Lime, Jiggery Water Etc. Complete Complying With Standard Specifications And As Directed , Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 230Mm X 230Mm X 20Mm Of Approved Quality Set In Cement Mortar 1:3 (One Cement And Three Sand) 12Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. , ( Plumping )Supplying And Fixing In Position Best Approved Quality (Oriya Type)White Indian Type Water Closet530 Mm X 440 Mm White Glazed Earthern Ware Of Approved Quality And Brand With P Or S Trap Conforming To Bis With Sand Cushion And Forming Flooring Alround The Closet Using 40 Mm Broken Brick Jelly In Lime Concrete 1:2:5 (One Lime, Two Sand And Five Brick Jelly) 100 Mm Thick And Finishing The Top To The Required Slope And Including Giving Necessary Connection To Ci Soil Pipes (Including The Cost Of 100Mm Dia Ci Pipe For A Length Of 600Mm) By Dismantling Brick Masonry Wall / Reinforced Cement Concrete Roof / Floor Slab And Making Good The Dismantled Portion To The Original Condition With Leakages Etc., Complete Complying With Standard Specifications And As Directed By The Departmental Officer. , Supplying And Fixing Of Indus Floor Mounted White Colour European Water Closet Parryware Or Equivalent, With Seat Cover And Dual Flush (3 & 6 Lit) Cistern Having P Trap Withseat Cover, Supplyingnon Corrosive Hinges, Cp Bolts, Nuts, Washers, Providing And Fixing Dash Anchor Fastners With Bolts / L -Brackets With Anticorrosive Paint Cutting Grooves In Masonry Or Concrete Surfaces, Groutingwith Cement Concrete 1:2:4 Mix, Using 20Mm Size Stone Jelly,Restoring The Damaged Portion To Their Original Condition Using Required Materials,Fixing The Water Closet To Perfect Level,Alignment,Testingetc.Complete. , Providing And Keeping In Stores, Shifting To The Place Of Installation, Fixing,Testing And Commissioning Ofwhite Coloured Vitreous China Under Counterregular Rectangular Wash Basin With Brackets/ G.I. Rag Bolts And Nuts Painted,32Mm Dia Brass C.P. Waste Coupling, (Heavy) 32Mm Diabrassc.P.Bottletrap,15Mmdiabrassc.P.Anglestopcockwith Flange, 15Mm Dia Brass C.P. Coldwater Connecting Pipe, Etc., The Work Shall Include,Required Extension Nipples, Cutting / Chasing And Making Good The Walls And Floors- Toilets. Wash Basin , Supply & Fixingat Sitein Position 15Mm Dia C.P Brass Bib Cocks Long Body With Wall Flangeincludingcuttingandmakinggoodthe Wallswhereverrequired , Supplying And Fixing Approved Best Quality Brass Cp Towel Rail 600Mm Long And 20Mm Dia With Brackets Of Same Materials Including Cost Of Teak Wood Plugs And Cp Screws, Etc.,Complete Complying With Standard Specifications. (The Tower Rail Should Be Got Approved By Executive Engineer Before Use On Works). , Supplying And Fixing In Position Indian Make Bevelled Edge Mirror Of Approved Quality And Brand Pvc / Fibre Glass Framed 600 X 450 X 5.5Mm Thick Mirror, Shelf Type With Hard Board Backing Of Approved Colour Fixed With Brass Screws, Rawl Plug, Etc., Complete Complying With Standard Specification. (The Mirror Should Be Got Approved By The Executive Engineer Before Use On Woks). , Supplying And Fixing In Positionc.P. Soap Tray Of Size 150 X 150Mm Including Cost Of Teak Wood Plug And C.P. Screws. Etc. Complete Complying With Standard Specification.(D) , Supplying And Fixing In Position Best Quality Pvc Soil / Waste Pipes Of Various Dia Having 6 Kg / Sq.Cm. Pressure Bis Mark And Providing Leak Proof Joints Using Pvc Adhesives Including Fixing To The Wall With Special Pvc / Ms Clamp, Teak Wood Plugs, Brass Screws, Etc., And Making Connection To All Sanitary Fittings, Dismantling Masonry / Rcc Works Wherever Found Necessary And Making The Good Dismantled Portion To The Original Condition,Including Testing For Any Leakages,Etc.,Complete Complying With Standard Specifications.(The Pvc Pipes Should Be Got Approved By The Executive Engineer Before Use On Works). The Rate For Earth Work Excavation Will Be Measured And Paid Separately In The Cases Where The Pipe Lines Are Proposed To Laid Below Ground Level. , A) 40Mm Dia. 6Kg Class Pvc Pipes. , B) 50Mm Dia. 6Kg Class Pvc Pipes. , C) 75Mm Dia. 6Kg Class Pvc Pipes. , D) 110Mm Dia. 6Kg Class Pvc Pipes. , Supplying And Fixing In Position Cost Iron Nahini / Floor Trap With Stainless Steel Grating / Pvc Nahini / Floor Trap With Pvc Grating Type Of Size 100 X 75 / 75 X 50 Mm With Best Quality Gratings Of Approved Brand Fixed Over A Bed Of Brick Jelly Lime Concrete 1;2;5 (One Lime Two Sand And Five Aggregate ) Brick Jelly 40Mm And Finishing With Cm 1;3(One Cement And Three Sand) Including Dismantling Masonary Wherever Found Necessary And Making Good To The Original Condition And Giving Connections To The Cast Iron Pipe Etc, Complete Complying With Standard Specififcation And As Directed By The Departmental Officers. , Supply And Fixing In Position Best Quality Pvc Is 4985 - Class-Ii - 4 Kg/Sqcm -Rain Water Pipes Of Various Size Having Isi Mark And Providing Leak Proof Joints With Such Asbend, Tee Junction, Door Etc.,Of Approved Qualityincluding Fixing To The Wall With Special Pvc /Ms Clamps, Etc., And Making Connection To All Sanitary Fittings, Wherever Necessary And Making Chipping Good To The Original Condition, Complying With Standard Specification Etc.,Complete. , B).110Mm Dia. 4Kg Class Pipes. , Supplying And Fixing In Position Of The Following Dia Pvc Rain Water Gratings For Rain Water Pipes ,Of Approved Quality And Varietyof Various Size Confirming To Iss Andincluding Necessary Cutting And Fixing And Giving Connection To Pvc Pipes Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officer. , 110Mm Dia , Supplying And Fixing In Position Of The Following Dia Pvc Specials Such Aspvc Vent Cowl Etc.,Of Approved Quality And Varietyof Various Size Confirming To Iss Amend Providing Leak Proof Joint Etc., Including Necessary Cutting And Fixing And Giving Connection To Pvc Pipes Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officer. , A)75Mm Dia , B)110Mm Dia , Part-C - External Drainage , Soil/ Waste Pipes , Supply And Fixing In Position Best Quality Pvc Is 4985 - Class- Iii - 6 Kg/Sqcm -Soil/ Waste Pipes Of Various Size With Approved Quality And Varietyof Various Size Confirminghaving Isi Mark And Providing Leak Proof Joints Including Erection Of Below Groundwith Excavation And Refilling Etc.,And Making Connection To Manholes /Gully Trap,Wherever Necessary And Making Chipping Good Portion To The Original Condition,Complying With Standard Specification Etc., Complete. , 160Mm Dia. 6Kg Class Iii-Pipes. , Supply, Laying And Erction Of Glazed Stone Ware Gully Trap (100 X 75 Mm) With 100 Mm Dia, Outlet Including Embedding Trap In Cement Concrete 1:3:6 And Constructing Chamber Of Size 300 X 300 Mm Inside Clear In Brick Masonry 230 Mm Thick, Plaster With Water Proof Cement Mortar (1:3) 15 Mm Thick On Both Internal And External Surfaces Inside Finished With Floating Coat Of Neat Cement. The Work Including Excavation To Required Depth Of Gully Trap And Refilling And Making Good In The Surface Withproviding And Fixing Sfrc Frame And Cover 400 X 400 Mm (Clear Opening) Complete Complying With Std.Specification. , Supplying And Erection And Construction Of Sewer Chambers Of Required Internal Dimensions 600X600 Upto 0.6 Mtr.Depth With 230Mm Brick Masonry In C.M.1:5 Thk Of Masonry Over Bed Of1:2:4 R.C.C. 200 Mm Thk Bove 100 Mm Thk P.C.C.1;3:6 Cement Concrete Foundations Over Sand Bed Of 100Mm Thk Channelling In 1;2:4 Cement Concrete, Plastering In 1:3 Cement Mortar For Internal And External Surface Finished With Floating Coat Of Neat Cement, The Work Including Excavation For Required Depth Of Gully Trap And Refilling And Making Good In The Surface With Sfrc Cover And Frame 600X600mm (Clear Opening)Complete Complying With Standard Specifications Etc., , Construction Of Rain Water Recharge Well Of 1200Mm Dia And Depth Upto 1500Mm, In Addition 110 Dia Special Blue Slotted Pipe For Bore Well.Pipe Should Be Laid From Bottom Of Ring Well Centre To Below 1500Mm As Shown In The Drawings,Including All Types Of Excavation, Occur For Pipe,Filling Of Rain Water Harvesting Materials With Construction Of R.C.C. Ring And Top 100Mm Rcc Slab With 450X450mm Perforated Sfrc Manhole And 230Mm Brick Wall In 2Height With Below 300Mm Lengthx100mm Thk P.C.C. As Per The Structural Filling The Filter Media As Per Drawing. , Supplying And Fixing Of Pvc Water Storage Tank Of Best Approved Quality And Make Of Super Thick With Lid Ofcapacity Of 2000 Litres With Accessories Including Giving Necessary Connection Etc., Complete As Directed By The Departmental Officer. (The Pvc Water Storage Tank Should Be Got Approved By The Engineer Before Use On Work)(Twad- Pano:173) , Wiring With 2X1.5Sqmm Pvc Insulated Single Core Unsheathed Copper Conductor Cable Of 1100V Grade With Isi Mark Confirming To Is: 694/1990 In Suitable Pvc Rigid Pipe Of 1.8Mm Thick With Isi Mark Concealed In Wall And Ceiling With Pvc Accessories In Flush With Wall Including The Cost Of Cable, Pvc Pipe And Specials, Ceiling Rose, Flush Type 5Ams Sp Mark Switch,Pvc Junction Box, 16Gauge Ms Switch Box 100Mm X 100Mm X 75Mm Coveredby Laminatedhylem Sheet 3Mm Thick, Cement, Labour And Making Good Of Concealed Portion With Suitable Colour For Concealed Pvc Light Point. (Sd 24) , Supply And Fixing Of 5A / 15 A 3 Pin Combined Flush Type Wall Socket With 15A Flush Type Switch Concealedin Suitable Ms Box In Flush With Wall Andcovered With 3 Mm Thick Hylem Sheet(Sd 138) Plug Point , Supply And Fixing Of 5A / 15 A 3 Pin Combined Flush Type Wall Socket With 15A Flush Type Switch Concealedin Suitable Ms Box In Flush With Wall Andcovered With 3 Mm Thick Hylem Sheet(Sd 138) Plug Point , Wiring With 2 X 1.5 Sq.Mm. (22 / 0.3) Pvc Insulated Unsheathed Sc Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessoires With Tw Switch Box And 5A Ft Switch In Flush With Wall With 3Mm Thick Hylum Sheet Cover For Making Good Of The Concealed Portion With Suitable Colour For Pvc Concealedfan Point (For Electronic Regulator)Sd 24 , Supply And Fixing Of 1200Mm (48)Sweep Ac Ceiling Fan Complete With Stepped Electronic 300W Regulator With The Existing Down Rod On The Existing Clamps. (Sd 110) , Supply And Fixing Of 18W Led 3000K Square Type Resessed Fiiitng (Philips/Havells) Complete With T.W Round Blocks On Wall Or Ceiling With Flu Tube With Pvc Unsheather Copper Leads From Terminals To The Filling (Si No : 16) Electrical Sor , Supply And Fixing Of Single Box Type 436W Fluorescent Fitting Complete With Electronic Ballast With Tw Roundblocks On Wall Or Ceiling With Flu Tube With Pvc Unsheathed Copper Leads From Terminals To The Fitting (Sd87) (Tube Light) , Supply And Fixing Of Wt Bulk Head Fitting With Guard (Philips / Bajaj / Crompton / K-Lite) Suitable For 11W Cfl (Sd83) , Supply And Run Of 1 Of No.8 Swg Gi Wire For Earth Connection (Sd74) , Supply And Fixng Of Tneb Meter Board Suitable For 3 Phase 200A Service Connection Made Up Of Suitable Angle Iron Frame Work Of Size 3 Feet X 2 Feet Using Angle Iron Of Size 1-1/2 X 1-1/2 X 1/4 Rigidly Fixed On Wall Covered With Hylem Sheet Of Size 3 Feet X 2 Feet Of 12Mm Thickness With Necessary Bolts And Nuts Supports And Supply And Fixing Of 3 Nos. 200A Fuse Units (500V), 1 No. Neutral Link, Copper Earth Flat Of Size 1 X 1/4 With Inter Connection Of Eb Meter To Fuse Units By 19/16 Pvc Insulated Copper Wire With Earth Connection Complete Sd 131 , Earthing As Per The Isi Specification With An Earth Electrode Of 2.10 Metre Class B Gi Pipe Of Dia Not Less Than40mm With Copper Earth Plate Of Size 125Mm X 50Mm X 6Mm With Necessary Funneling Arrangements Withnecessary Masonry Work And With 38Mm Rcc Cover Slab For The Brick Masonry (Sd233) , Supply An Fixing O 6Way Spdb Of 16A /Way With 16Adp Switch With Metal Clad Of 500V With Fuse And Neutral (Sidehandle) On Suitable Angle Iron Frame Work With Trunking Box Ms Cableen Try Box With Pwd Earthing(Sd 153) , Supply And Fixing Of 32 Amps Dp Switch Of 500V With Metal Clad With Fuse And Neutral (Side Handle) On Suitable Tw Board With Pwd Earthing(Sd 143) , Supply And Run Off 2 Of 4 Sq Mm Pvc Insulated Single Core Unsheathed Copper Conductor Cable Of 1100 V Grade With Isi Markconfirming To Is:694/1990 With Continiousearth Connection By Means Of 1.50 Sqmm Pvc Insulated Single Core Unsheathed Copper Conductor Cable Confirming To Is:694/1990 In Suitable Pvc Rigid Pipe 1.8Mm Thick Concealed In Wallfor Mains Including The Cost Of Pvc Pipes And Specials, Cables, Cement, Brass Screws, T.W Plugs, Saddles And Labour Etc., Complete In All Respects As Directed By The Departemental Officers. (Derived From Sd 57) , Mcb Distribution Board -4 Ways 3 Phase Db No. Of Ways Incomer Mcb / Isolator - 4 No. Of Ways Incomer Elcb / Rcd - 4 No. Of Outgoings Ways - 12 Pwd Sor 2021-22 Pg.No. 136 Sl.No. 16.1.A , Supply And Fixing Of 8 Way Single Pole And Neutral Mcb Sheet Steel Enclosure Distribution Board With Doubledoor (Metal) 1 No. 32A Dp Mcb As Incoming And 6 Nos. 6A To 32A Spmcb Outgoing In Flush With Wall Andmaking Good Of The Concealed Portion With Earth Connection Only. The Mcb Db And Mcbs Should Be With Isimark (Like Standard Make) (Sd167) , Supply Andfixingof32a Tpnmcswitchwithsuitableangleironframework With Ms Cable Entry Boxes With Earth Connection Only (Sd164) , Service Connection Accessories L.T. 1100V Pvc Aluminium Armoured Under Ground Cable With Isi Mark. , 4 Core 16 Sq.Mm. Pvc Armoured Ug Cable (Sd 203) , 4 Core 10 Sq.Mm. Pvc Armoured Ug Cable (Sd202) , Supply And Fixing Of Brass Cable Gland For 4 X 25 Sq.Mm. Pvc Ltug Aluminium Armoured Cable With Earth Connection. (Sd185) , Supply And Fixing Of Brass Cable Gland For 3-1/2 X 25 Sq.Mm. Pvc Ltug Aluminium Armoured Cable With Earth Connection(Sd186) , Telecommunication Lines & Fittings , Service Connection Charges, Ps Charges & Contain Shipies , Earthwork For Foundationsand Depositing On Bank With Initial Lead Of 10 Mt. And Initial Lift Of 2 Mt. In Sand, Silt Or Other Loose Soil, Wet Sand Or Silt Not Under Water, Light Black Cotton Soil, Sandy Loam And Ordinary Soilincluding Excavated Earth. , Laying The Plain Cement Concrete 1:4:8(One Cement Four Sand And Eight Brokenmachine Crushed Stone Jelly) Using Hbg Machine Creased Machine Crushed Stone Jelly Of Size 40Mm Gauge For Founding And Basement Including De- Watering If Found Necessary And Laid In Layers Of Not More Than 15Cms Thick Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers.The Rates Inclusive Of Centering , Shuttering, Strutting, Propping,Removal Of Form Work If It Is Required And All Leads ,Lifts And Curing Etc.. , Supplying And Erecting Centering For Sides And Soffits Including Necessary Supports And Strutting Up To 3.29 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At About 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification. (Payment For Centering Shall Be Given After The Concrete Is Laid) , Brick Work In Following Cement Mortar Using Best Quality Of Country Bricks Of Size 8-3/4 X 4-1/4 X 2-3/4 For Foundation And Basement Including Curing, Etc., Complete Complying With Standard Specifiction. , Reinforced Cement Concrete 1:1.5:3 Mixusing 20Mm Machine Crushed 20Mm Gauge Hard Broken Granite Stone Jelly For All Reinforced Cement Concrete Works Connected To This Work Excluding Cenetering, Shuttering And Cost Of Reinforcement Grills Placed In Position, But Including Laying, Vibrating, Curing And Finishing, Fixing Fan Clamps In The Rcc Floor And Roof Slab Works Wherever Necessary And Bearing Surfaces Of The Wall At The Sides And Bottom Of The Slab, Beams Shall Be Finished Smooth With Cement Mortar 1:3 (One Cement And Three Sand ) And Kraft Paper Laid Without Claiming Extra Cost Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. , Providing & Applying 12 Mm Thick Cement Plaster In Cm 1:5 (1 Part Of Cement: 5 Parts Of Sand) To Walls Internally And Externally In Single Coat At All Levels To Correct Line And Level Including Chicken Wire Mesh At All Joints Of Brick And Concrete Surfaces With Minimum Overlap Of 150 Mm In All Directions, Scaffolding, Rounding Off Or Champhering Of Corners, Offsets, Fin/ Bands, Projections, Etc. And Cleaning Of Surface, Raking Out Joints, Roughening Of Surface,Chiseling The Undulated Surface Wherever Necessary And Curing, Etc., All Materials And Labour Complete In All Respects Including All Lead, Lift And Descent Andas Directed. , Supplying And Fixing In Position C.I.Manhole Covers (Heavy Duty) Mof Various Sizes Of Best Approved Quality And As Per Standard Specificationsetc., Complete.0.6X0.6M Size Etc., Complete. , Providing, Machine Mixing And Laying On The P.C.C/ R.C.C. Surface In Approved Panels Of25 Mm Thick Granolithic Flooring In Cement Concrete Mix Of 1:2:4 (1 Cement: 2 Sand: 4 Aggregate 10 To 12 Mm Thick)Well Vibrated,Compacted Including 45 X 3 Mm Glass Dividing Strip, Fixed To Correct Level And Finished Smooth And Cured By Keeping Surfaces Well-Covered And Protected Against Excess Of An Type. (The Contractor To Provide For Preparation Of Surface By Cleaning, Hacking And Exposing Aggregate To Achieve The Best Bond And Any Curling, Lifting Or Beybonding Noticed Shall Be Rectified By The Contractor At His Cost). , Supplying, Fabricating And Placing In Position Mild Steel/Ribbed Tor Steel Rods For All Rcc Works Including Cost Of Steel And Binding Wire Also In All Floors, Complete Complying With Standard Specfication. , Gst Amount For Providing Service To Government Contract Works For The Above Construction Works. { Gst Amount Is The Total Gst Amount For Total Overall Quoted Amount Above This Row In Column Bb For All Works In This Package}
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
33.
Housing Urban and Rular Development #10584119 Price Bid
Construction Of Govt.Ayurvedic Hospital At Godha In Distt- Aligarh (U.P) - Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil 2 Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete 3 Providing and layingin cement concrete 1:4:8 (1 cement :4 coarse sand :8stone ballast 40 mm nominal size) and curing complete,including cost ofform- work,in foundation and floors. 4 Making apron(with Drain & other )analysis 5 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONALanti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling12 mm diameter holes and plugging with cement mortar 1 :2(1 cement : 2 Coarse sand) to match the existing floor With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 6 Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement All work up to plinth1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Upto plinth level (i) R.C.C. work in Plinth Band 7 Above plinth to floor-V lvl (ii) R.C.C. work in Beam/Lintel 8 (iii) R.C.C. work in Slab 9 (iv) R.C.C. work in Beam 10 Centering and shuttering including strutting, propping etc. and removal of form for all heightsLintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick 11 Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick 12 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) 13 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) 14 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 15 Paintingon D.P.C. with two coats of air blown bitumen 85/50 OR 85/25 @ 1.7 KG/SQM approx including cost of fuel if any. 16 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm 17 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on bothfaces of shutters: :35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 18 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured 19 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 20 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat 21 Providing and fixing factory made ISI marked steel glazed doors, windowsand ventilators, side /top /centre hung, with beading and all memberssuch as F7D,F4B, K11 B and K12 B etc. complete of standard rolledsteel sections, joints mitred and flash butt welded and sash bars tenonedand riveted, including providing and fixing of hinges, pivots, includingpriming coat of approved steel primer, but excluding the cost of otherfittings, complete all as per approved design, (sectional weight of onlysteel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) 22 Providing and fixing T-iron frames for doors, windows and ventilators ofmild steel Tee-sections, joints mitred and welded, including fixing ofnecessary butt hinges and screws and applying a priming coat ofapproved steel primer Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size). 23 Fixing of Door, windows/ventilators chaukhats in position. DOOR 24 WINDOW 25 VETILATOR 26 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. 27 15 mm cement plaster on rough side of single or half brick wall of mix :1:4 (1 cement: 4 coarse sand) 28 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) 29 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) 30 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 31 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, includingcement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 32 Providing and laying Vitrified tiles in floor in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in allcolours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includinggrouting the joints with white cement and matching pigments etc. Thetiles must be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips of requiredthickness, leveling system and rubber mallet for placing the tiles gentlyand asily Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm 33 Providing and laying Vitrified tiles in floor in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer, in allcolours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includinggrouting the joints with white cement and matching pigments etc. Thetiles must be cut with the zero chipping diamond cutter only . Laying oftiles will be done with the notch trowel, plier, wedge, clips of requiredthickness, leveling system and rubber mallet for placing the tiles gentlyand asily Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm 34 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, includingcement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 35 Kota stone slab flooring over 20 mm (average) thick base laid over andjointed with grey cement slurry mixed with pigment to match the shadeof the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick 36 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 37 Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle green, black of anysize as approved by Engineer-in-Charge in skirting, risers of steps anddados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqmincluding pointing in white cement mixed with pigment of matching shadecomplete 38 Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of pproved brand andmanufacture 39 Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of pproved brand andmanufacture 40 Finishing walls with Premium Acrylic Smooth exterior paint withSilicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) 41 Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : New work (two or more coats) over and including waterthinnable priming coat with cement primer 42 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 43 Providing & fixing S.S. Mosquito proof heavy quality iron wire gauge or expended metal heavy quality over windows and including supplybof c.p. teak wood batten 8cm x 1cm flat iron 25mmx4mm and including supply of necessary screws aa materials, labour, T&P etc. 44 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes 45 Providing and fixing aluminium sliding door bolts, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screwsetc. complete: 300x16 mm 46 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. omplete:250x100 mm 47 Providing and fixing aluminium handles, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete : 100 mm 48 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand) 49 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests 50 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 51 Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standardpattern, including painting of fitting and brackets, cutting & making good the walls wherever required . Flat back Wash Basin size 550X400 mm with single 15mm C. P. brass pillar tap 52 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32 mm dia (for wash basin) 53 40 mm dia(for sink and urinal) 54 Providing & Fixing 600 X 450 mm bevelled edge mirror of superiorglass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 55 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 56 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 57 Providing and fixing PTMT grating of approved quality and colour. Circular type:125 mm nominal dia with 25 mm waste hole 58 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter 59 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 60 Providing & fixing soil, waste and vent pipes. a) 100mm dia centrifugally cast iron S & S pipe. 61 b)75mm dia centrifugally cast iron S & S pipe. 62 Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters. 100 mm 63 75 mm 64 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. a) for 100mm dia pipe. 65 b) for 75mm dia pipe. 66 Providing & fixingcast iron coller. a) 100mm dia. 67 b)75mm dia. 68 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet : Sand cast iron S&S as per IS - 3989 110mm dia 69 Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete a) 100mm 70 b) 75mm 71 Providing and fixing centrifugaly cast iron single equal plain junction of required degree. 100x100x100mm 72 75x75x75mm 73 Providing and fixingcast iron terminal guard.100 mm 74 75 mm 75 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 76 Providing and fixingGI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work). Internal work-Exposed on wall 15mm dia nominal bore 77 25mm dia nominal bore 78 32mm dia nominal bore 79 Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work. 15mm dia nominal bore 80 25mm dia nominal bore 81 32mm dia nominal bore 82 Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall (internal work) Exposed on wall a) 15mm dia nominal outer dia pipes 83 a) 20mm dia nominal outer dia pipes 84 Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 25 mm nominal bore 85 32 mm nominal bore 86 Providing and fixing ballvalve (brass) of approved quality complete. (High or low pressure with plastic floats). 25 mm nominal bore 87 Providing&fixing15 mm nominal bore45 cm long unplasticised PVC connection pipewith brass unions. 88 Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality conformingtoIS 8931. 89 Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved qualityconforming to IS standardsandweighing notlessthan 810 gms. 90 Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conformingto IS8931. 91 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and makingnecessaryholes for inlet, outlet and overflow pipes but without fittingandbasesupportfor tank. 500 litres capacity 92 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C 93 Wiring for circuit/sub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVCconduit as required. 2X1.5 sqmm + 1x1.5 sqmm earth wire 94 2X2.5 sqmm + 1x 2.5 sqmm earth wire 95 2X4.0 sqmm + 1x 4.0 sqmm earth wire 96 2X6.0 sqmm + 1x 6.0 sqmm earth wire 97 Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 20mm 98 Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections but excluding modular plate etc as required. TV antenna socket outlet 99 Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 100 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 101 Supplying and fixingfollowing size/modules, GI box along with modular base& cover plate for modular switches in recess etc as required.1 or 2 module(75mm X 75 mm ) 102 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connection etc. as required. 103 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connection etc. as required. 104 Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/woodedn block including connectionetc. as required. 105 Supplying and fixing brass batten/angle holder including connectionetc. as required. 106 Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lamps per fitting, complete with all accessories including connection etc. as required. 107 Installation, testing and commissioning of prewired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as required. 108 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc.Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. 109 Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. 110 Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required.upto 450 mm sweep. 111 Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes. 112 Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, `C` curve including connections, painting etc. as required. 113 Providing and fixing circular/Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3 mm dia round headed screwed, one loc at the conrners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 114 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current(BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM(tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 115 Supplying and fixing followingway, single pole and neutral sheet steel, MCB distribution board, 240 V on surface /recess completewith , tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). 12 way, Double door 116 Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C series,miniature circuit breaker (MCB) suitable for inductive load offollowingpolesin the existingMCBDBcomplete with connections, testing andcommissioning etc. as required Single Pole 117 Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required. 118 Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure withcover platehavinglockingarrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required. 119 Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 120 Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required. 121 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm 122 Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 2 X 10 sqmm. (19mm) 123 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required. 50 mm Dia(Rate taken From Civil DSR 2021-18.12) 124 Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554. 10 sqmm 2 core 125 Supply & fixing of7/9 W LED BULB complete in all respect. 126 Supply and fixing of LED Tube Light with batten suitable for up to 1X20 watt LED tube light complete including tube etc. on surface complete in all respect. 127 Supplyof AC 230/250 Volts, 50 Hz 55w 1400 rpm exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required.-Make: Havells-STANDARD -Refresh Air-SPS 300mm sweep. 128 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil From 0.00 mt to 1.50 mt 129 Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. 130 Reinforced cement concrete work in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up tofloor five level, excluding cost of centering, shuttering, finishing andreinforcement :5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu ral sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources) As in item no. 3above but for slabs (Using 1:1.5:3 Mix concrete) 131 Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick 132 Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 133 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, includingcement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 134 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 Coarse sand 135 Providing and fixing soil, waste and vent pipes : 75mm diameter : Sand cast iron S&S pipe as per IS: 1729 136 Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:(With 20x20mm square bar) 137 Supply & fixing of fire extinguisher, ABC Type 6.00 kg. capacity(ISI Marked IS:15683 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 138 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 300 mm dia 139 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size dia 140 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia 141 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. 142 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.. 143 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 100 mm dia 144 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). 150 mm dia 145 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.32 mm dia nominal bore 146 Supply and fixing of Armoured cable ISI marked (4 sqmm 3 core) 147 Pumping Set KSB make submersible pump set suitable for installation in bore well of min 110 mm inner dia preferably more and having under noted specifications. (1.5 H.P.) 148 Interlocking Tiles-Rubbermouldedrefiective Zig-Zag 80mm Providing and laying of Interlocking Concrete Block Laying ofPavements having thickness 80mm including levelling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling joints with local sand etc for proper completion of the work as per drawing and technical specification clause 1504 149 G.S.T Extra as per applicable
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
34.
Rural Development #10579130 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work In The Gram Panchayat Shari Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
35.
Rural Development #10579078 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work N The Grampanchayat Jawala Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
36.
Educational and Research Institute #10575938 Price Bid
Tender For Supply Of Ctvs Implants / Instruments - Cardiothorecic Implants And Instruments , Ctvs Implants / Instruments , Silk1 No 75Cm , Silk1-0 R.C 75Cm , Silk3-0 R.B. 75Cm , Silk4-0 R.C. 75Cm , Silk4-0 R.B. 75Cm , Umblical Tape 75Cm , Pacing Wire 2-0 18 Mm 75Cm , Pacing Wire 2-0 26 Mm 75Cm , Surgical Steel 4 No Cutting 48Mm , Surgical Steel 4 No Blunt Point R.B. 45Mm , Surgical Steel 5 No Cutting48 Mm , Surgical Steel 5 No Blunt Point R.B. 45 Mm , Surgical Steel 6 No Cutting 48 Mm , Surgical Steel 6 No Blunt Point 45 Mm , Polyester 2-0 10X75cm 17.5 Mm , Polyester 2-0 10X75cm 17.5 Mm3x3x1.0 Pledget , Polyedter 2-0 10X75cm 26Mm , Polyedter 2-0 10X75cm 26Mm6x3x1.0 Pledget , Polyedter 2-0 10X75cm 26Mm3x3x1.5 Pledget , Polyedter 2-0 10X75cm 26Mm3x3x1.0 Pledget , Polyproplyne2-017.5 Mm D.A. 90 Cm , Polyproplyne2-017.5 Mm D.A. 150 Cm , Polyproplyne2-026 Mmd.A.90 Cm , Polyproplyne2-026 Mmd.A.150 Cm , Polyproplyne3-0 17.5 Mm D.A. 90 Cm , Polyproplyne3-0 25Mm D.A. 90 Cm , Polyproplyne3-0 26 Mm D.A.90 Cm , Polyproplyne4-0 13 Mm D.A.60 Cm , Polyproplyne4-0 16 Mm D.A.90 Cm , Polyproplyne4-017.5 Mmd.A. 90 Cm , Polyproplyne4-017.5 Mmd.A. 90 Cm Pledget 3X3x1.5 , Polyproplyne4-020 Mm D.A.90 Cm , Polyproplyne4-026 Mm D.A.90 Cm , Polyproplyne4-026 Mm D.A.90 Cm Pledget 3X3x.50 , Polyproplyne5-010 Mm D.A. 60 Cm , Polyproplyne5-010 Mm D.A. 75 Cm , Polyproplyne5-010 Mm D.A. 60 Cm Pledget 3X3x1.5 , Polyproplyne5-010 Mm D.A. 75 Cm Pledget 3X3x1.5 , Polyproplyne5-010 Mm D.A. 75 Cm Pledget 3X3x0.5 , Polyproplyne5-013 Mm D.A. 60 Cm Pledget 3X3x1.5 , Polyproplyne5-013 Mm D.A. 60 Cm Pledget 3X3x0.5 , Polyproplyne5-013 Mm D.A. 75 Cm Pledget 3X3x0.5 , Polyproplyne5-013 Mm D.A. 45 Cm , Polyproplyne5-013 Mm D.A. 75 Cm , Polyproplyne5-016 Mm D.A. 90 Cm , Polyproplyne5-016 Mm D.A. 90 Cmpledget 3X3x1.5 , Polyproplyne5-020 Mm D.A. 90 Cm , Polyproplyne6-010 Mm D.A. 60 Cm , Polyproplyne6-010 Mm D.A. 75 Cm , Polyproplyne6-010 Mm D.A. 60 Cm 3X3x1.5 , Polyproplyne6-010 Mm D.A. 60 Cm 3X3x0.5 , Polyproplyne6-013 Mm D.A. 60 Cm , Polyproplyne6-013 Mm D.A. 60 Cm Black Needle , Polyproplyne6-013 Mm D.A. 45 Cm , Polyproplyne6-013 Mm D.A. 75 Cm , Polyproplyne6-013 Mm D.A. 90 Cm , Polyproplyne6-011 Mm D.A. 60 Cm , Polyproplyne6-09 Mm D.A. 60 Cm , Polyproplyne6-09 Mm D.A. 75Cm , Polyproplyne7-09Mm D.A. 60Cm , Polyproplyne7-09Mm D.A. 75Cm , Polyproplyne7-09Mm D.A. 60Cm Black , Polyproplyne7-09Mm D.A. 60Cmp V Needle , Polyproplyne7-09Mm D.A. 60Cmc Cneedle , Polyproplyne7-010Mm D.A. 60Cm , Polyproplyne7-08Mm D.A. 60Cm Cc Needdle , Polyproplyne7-08Mm D.A. 60Cm P V Needle , Polyproplyne7-08Mm D.A. 60Cm Black , Polyproplyne8-06 Mm D.A.60 Cm , Polyproplyne8-06.5 Mm D.A.60 Cm , Polyproplyne8-09 Mm D.A.60 Cm , Polyproplyne8-010 Mm D.A.60 Cm , Polyglactin1 No R.B. 40 Mm A.M. 90 Cm , Polyglactin1 No R.B. 40 Mm A.M. 70 Cm , Polyglactin1 No R.B. 36 Mm A.M. 120 Cm , Polyglactin1 No R.B. 36 Mm A.M. 90 Cm , Polyglactin 1 No.R.C. 40Mma.M. 90 Cm , Polyglactin 1 No.Taper Cut 40Mma.M. 90 Cm , Polyglactin 1-0 No. R.B. 40Mma.M. 90 Cm , Polyglactin 1-0 No.Taper Cut 36Mma.M. 90 Cm , Polyglactin 1-0 No.R.C. 36Mma.M. 90 Cm , Polyglactin1-0 No R.B. 30 Mm A.M. 90 Cm , Polyglactin1-0 No R.B. 36 Mm A.M. 90 Cm , Polyglactin 2-0 R.B. 30 Mm A.M. 90 Cm , Polyglactin 2-0 R.B. 30 Mm A.M. 70 Cm , Polyglactin 2-0 R.B. 40 Mm A.M. 90 Cm , Polyglactin 2-0 R.C. 40 Mm A.M. 90 Cm , Polyglactin 2-0 R.B. 36 Mm A.M. 90 Cm , Polyglactin 3-0 R.C. 24 Mm A.M. 70 Cm , Polyglactin 3-0 R.B. 20 Mm A.M. 90 Cm , Polyglactin 4-0 R.B. 20 Mm A.M. 70 Cm , Polyglactin 5-0 R.B. 16 Mm A.M. 45 Cm , Pds 1 No Loop , Absorbable Tacker , Non Absorbable Tacker , Barb Sutures Polydiaxone 1-0 Rb , Barb Sutures Poluglecaprone / Polyglactin 2-0 , Barb Sutures Polydiaxone 2-0 , Barb ( Polydiaxonone Violet ) 30 Cm 1-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 15 Cm 1-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 30Cm 1-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 45Cm 1-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 45Cm 2-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 45Cm 2-0 1 / 2 C.R.B. , Barb ( Polydiaxonone Violet ) 25 Cm 2-0 1 / 2C.R.B. , Barb ( Polydiaxonone Violet ) 45Cm 3-0 3 / 8C. R.C. , Barb ( Polydiaxonone Violet ) 15 Cm 3-0 1 / 2 C.R.B. , Barb ( Pga-Pcl Und ) 36 Cm2-0 , Barb ( Polydiaxonone Violet ) 30 Cm 1-0 , Barb ( Pga-Pcl Und ) 30 Cm 3-0 , Barb ( Pga-Pcl Und ) 30 Cm 4-0 , Non-Oxidised Non-Regenrated Cellulose 10X10 Cm , Non-Oxidised Non-Regenrated Cellulose5x10 Cm , Non-Oxidised Non-Regenrated Cellulose 8X20 Cm , Membrane Oxygenator Efficient Heat Exchanger With Surface Coating. Small Adult 5 Ltr , Membrane Oxygenator Efficient Heat Exchanger With Surface Coating. Ped. 4 Ltr , Membrane Oxygenator Efficient Heat Exchanger With Surface Coating With Hardshell Venous Reservoir, Cardiotomy Filter And Integrated Arterial Filter. Neonatal 1.5 Ltr , Custom Tubing Pack , Silver Knitted Acetate Collagen-Coated Polyester Graft. Knitted, Woven.Antimicrobial.Reduce The Risk Of Graft-Related Infection Silver Acetate Does Not Promote Bacterial Resistance Validated Intended Use With Rifampicin Loading.Bovine Collagen.Water Permeability = 5Ml • Cm-2 • Min-1@120 Mmhgsizes40 Cm6, 7, 8, 10, , Silver Knitted Acetate Collagen-Coated Polyester Graft. Knitted, Woven.Antimicrobial.Reduce The Risk Of Graft-Related Infection Silver Acetate Does Not Promote Bacterial Resistance Validated Intended Use With Rifampicin Loading.Bovine Collagen.Water Permeability = 5Ml • Cm-2 • Min-1@120 Mmhgsizes70 Cm6, 7, 8, 10, , Silver Knitted Bifurgatedacetate Collagen-Coated Polyester Graft. Knitted, Woven.Antimicrobial.Reduce The Risk Of Graft-Related Infection Silver Acetate Does Not Promote Bacterial Resistance Validated Intended Use With Rifampicin Loading.Bovine Collagen.Water Permeability = 5Ml • Cm-2 • Min-1@120 Mmhgsizes50 Cm 12X6, 14X7, 16X8, 18X9 , Ptfe Ring Graft40 Cm Length 5, 6, 7, 8, , Ptfe Ring Graft75 Cm Length 5, 6, 7, 8, , Hmeand Bacterial Viral Twin Filter. European Ce , Bowei Dick Test 134 ° , Heart Stablizer Thin Mount With A Constant Low Profile Design For An Optimized Work Area.Stabilizer Allows A Vertical Drop Of The Flexlink Arm Into The Chest Cavity.Proprietary Technology Provides 180º Side-To-Side Range Of Motion Of The Arm.Integrated Channels Secure Tubing Away From The Work Area , Hearrt Positioner Active Suspension Technology Allows Normal Cardiac Motion And Maintains Stable Hemodynamics.Tissue-Conforming Suction Cup Uses Gentle Vacuum To Securely Lift And Hold The Heart.Designed For Apical Or Nonapical Placement , Hemofilter Adult , Hemofilter Ped. , Cabg Kit On Pumpannexure 1 , Double Valve Surgery Kitannexure 2 , Toff Surgery Kitannexure 3 , Sterile Collagen Sheets In Wet & Meshedform. Puretype 1&3Triple Helicalmembrane Bovine Originpreserved In A Mixture Of Iso Propyl Alcohol And Watergamma Sterilized And Supplied In Double Sterile Pouches. Biocompatibleas Per Iso 9001 / Iso13485 N10x10 , Sterile Collagen Sheets In Wet & Meshedform. Puretype 1&3Triple Helicalmembrane Bovine Originpreserved In A Mixture Of Iso Propyl Alcohol And Watergamma Sterilized And Supplied In Double Sterile Pouches. Biocompatibleas Per Iso 9001 / Iso13485 N10x10 , Sterile Collagen Sheets In Dryform. Puretype 1&3Triple Helicalmembrane Bovine Origingamma Sterilized And Supplied In Double Sterile Pouches. Biocompatibleas Per Iso 9001 / Iso13485 N10x10 , Sterile Collagen Sheets In Dryform. Puretype 1&3Triple Helicalmembrane Bovine Origingamma Sterilized And Supplied In Double Sterile Pouches. Biocompatibleas Per Iso 9001 / Iso13485 N10x20 , Sterile Porus Collagen Sheet In Dry Form ( Fish Origin ) 10X10 Cm , Sterile Porus Collagen Sheet In Dry Form ( Fish Origin ) 8 X 12 , Silicone Sheetpure Poly Siloxanebased Silicone Scar Managementproduct In Sheet Form.10X10 , Biofil Ab Sterils Medicated Collegan Particles5 Ml , Biofil Ab Sterils Medicated Collegan Particles10 Ml , Lipido-Colloid Contact Layer Impregnated With Silver Salts Urgotul Ag Silver Sterilenon-Occulusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles ( Cmc ) , Petroleum Jelly, Polymers And Silver Salts With Demonstrated In Vitro Antibacterial Activity Upto 7 Days, Using Patented Lipido- Colloid Technology 10X12 , Lipido-Colloid Contact Layer Impregnated With Silver Salts Urgotul Ag Silver Sterilenon-Occulusive Woundcontact Layer Consists Of Silver Healing Matrix Made Of Polyester Mesh Impregnated With Hydrocolloid Particles ( Cmc ) , Petroleum Jelly, Polymers And Silver Salts With Demonstrated In Vitro Antibacterial Activity Upto 7 Days, Using Patented Lipido- Colloid Technology 15X20 , Lipido-Colloid Foam Dressing With Adhesive Border Urgotul Sterile Self -Adherentpatented Tlc Matrix ( Lipido Colloid Technology ) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer , A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing.13X13 , Lipido-Colloid Foam Dressing With Adhesive Border Urgotul Sterile Self -Adherentpatented Tlc Matrix ( Lipido Colloid Technology ) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer , A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing.15X20 , Lipido-Colloid Foam Dressing With Adhesive Border Urgotul Sterile Self -Adherentpatented Tlc Matrix ( Lipido Colloid Technology ) Wound Contact Layer Combined Withabsorbent Polyurethane Foam Pad , A Superabsorbent Layer , A Vapour Permeable Waterproof Outer Film With Soft Silicone Adhesive Border On The Edges For Atraumatic Removal And Repositioning Of Dressing.20X20 , Syringe For Pressure Injector Compatible With Imaxon Injector Zy6322 , Syringe For Pressure Injector Compatible With Imaxon Injector Art-700 , Y Adoptor For Pressure Injector Compatible With Imaxon Injector , Vessel Harvesting System , Vac Dressing Medium Npwtpolyurethene Foam Dressingwith Drape.Ruler. Trac Tubing.1 Ltr Cainester For Exudate Collection.Dgci, Fda And Ce Certified. Company Having Manufacturing And Import License. Compatible To Existing Machine , Vac Dressing Largenpwtpolyurethene Foam Dressingwith Drape.Ruler. Trac Tubing.1 Ltr Cainester For Exudate Collection.Dgci, Fda And Ce Certified. Company Having Manufacturing And Import License.Compatible To Existing Machine , Cainester500 Ml. Compatible To Existing Machine. , Transperint Dressing With Absorbantpad Fully Transprent Backing, Hypoallergenic Acrylic Adhesive 5X7 Cm, It Should Have A Bsi Kitemark Certificate. , Transperint Dressing With Absorbantpad Fully Transprent Backing, Hypoallergenic Acrylic Adhesive 6X10 Cm, It Should Have A Bsi Kitemark Certificate. , Transperint Dressing With Absorbantpad Fully Transprent Backing, Hypoallergenic Acrylic Adhesive 9X15 Cm, It Should Have A Bsi Kitemark Certificate. , Transperint Dressing With Absorbantpad Fully Transprent Backing, Hypoallergenic Acrylic Adhesive 9X20 Cm, It Should Have A Bsi Kitemark Certificate. , Transperint Dressing With Absorbantpad Fully Transprent Backing, Hypoallergenic Acrylic Adhesive 9X25 Cm, It Should Have A Bsi Kitemark Certificate. , Polyurethane Film Peripheral Iv Dressing For Neonates Reinforced With Soft Cloth Border And Notch With Pattern Coated Acrylic Adhesive. It Has A Picture Frame Delivery System With 3 Extra Sterile Tape Strips For Additional Secural And And Complies With Iso-10993 Standards For Biocompatibility. Size: 3.8Cm X 4.5Cm. , Polyurethane Film Peripheral Iv Dressing Forpediatric Reinforced With Soft Cloth Border And Notch With Pattern Coated Acrylic Adhesive. It Has A Picture Frame Delivery System With 3 Extra Sterile Tape Strips For Additional Secural And And Complies With Iso-10993 Standards For Biocompatibility. Size: Size: 5Cm X 5.7Cm. , Polyurethane Film Peripheral Iv Dressing For Adult Reinforced With Soft Cloth Border And Notch With Pattern Coated Acrylic Adhesive. It Has A Picture Frame Delivery System With 3 Extra Sterile Tape Strips For Additional Secural And And Complies With Iso-10993 Standards For Biocompatibility. Size: 6.5Cm X 7Cm. It Should Be Approved By Hript And Hcipt Test. , Ioban 6650 , Pm Kit Doubleeuropean Ce / Usfda , Hme Filter , Ventilator Circuit 2 Water Trap With Mdi Adoptor Plain. Md / 5 Approved , Ventilator Circuit With Mdi Adoptor Single Water Trap. Md / 5 Approved , Bain Circuit Adult With Tubing. Md / 5 Approved , Bain Circuit Pediatric With Tubing. Md / 5 Approved , Dlt All Sizes , Act Crtidge , Snareadult , Snare , Catheter Mpa , Catheter Ma , Catheter Pigtail , Hydrophilic Coatedguide Wire 260 Cm Exchange Length.Should Available In 0.025, 0.032, 0.035, 0.038. Angled And Straight Tip. Fixed And Movable Core Ce Certified , Ptfe Guide Wire 260 Cm Exchange Length Extra Stiff ( Amplatzer Type ) .Should Available In 0.025, 0.032, 0.035, 0.038. Angled And Straight Tip. Fixed And Movable Core Ce Certified , Femoral Introducer Sheath 4, , 5, 6, 7 F With Punture Needle. Hydrophillic Coated.11 Cm Long. 18 G X 7 Cm Long Needle. 0.032 To 0.038 Guide Wire Compatible. Cross Cut Valve To Prevent Back Leak And Air Aspiration.Integral Side Port 3 Way Stopcock..Suture Eyefor Securing Sheath.Kink Resistantdialator Hub Lock Mechanism , Plasma Cassattee 10133 , Tyvek Roll3X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll4X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll6X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll8X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll10X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll14X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll16.5X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Tyvek Roll20X70 Mtr Made Of Tyvek, Mylarwithsterrad Chemical Indicator Printed .Have4057 B Grade With Process Indicator [ Iso: 11140:-1: 2005 ] European Ce. Certified By510k ] .Iso 9001:2015 Certified, Us Fda Approved. Supplier / Importer Should Becpcb, India Registered . , Multienzyme Solution. Anionic Multienzyme Solution With Sodium Tetraborate Decahydrate, Should Be Biodegradable And Free From Ethylene Glycol . Can Be Used Manually And Can Also Be Used In Aer. Effective In 3 Minutes. Pack Of 3.8 Liter , Dialyzer With Tubing1.4Single Use With Steam Sterlization. Filter And Tubing Should Be Same Manufacterur , Dry Bicarbonate Bag 650 Gm Bibag. Compatible With Fresenius Machine. , Citrosteril5 Ltr Each 100 Gm Citro Should Have 21 Gm Citric Acid. 1- Hydrate Lactic Acid And Malic Acid.Ph Value In Between 1.7 To 2.0 And Have Excellent Removal Oflimescale And Have Disinfection And Decalcification In One Process. , Diasafe , Long Term Chronic Dialysis Catheter Set Usfda / European Ce. Symetrical Tip. Antregrade / Retrograde. 15 Fr. 19 Cm , Long Term Chronic Dialysis Catheter Set Usfda / European Ce. Symetrical Tip. Antregrade / Retrograde. 15 Fr. 23 Cm , Dissector Grasping Forcep Maryland Medium Dia 5 Mm. Length 30 Cm With Plain Fiber Handle , Dissector Grasping Forcep Maryland Medium Dia 5 Mm. Length 40 Cm With Plain Fiber Handle , Atraumatic Grasping Forcep Fenestrated Double Slit Curve ( Sa ) Dia 5Mm Length 30 Cm With Fibre Handle Button Ratchet , Atraumatic Grasping Forcep Fenestrated Double Slit Curvedia 5Mm Length 40 Cm With Fibre Handle Button Ratchet , Atraumatic Grasping Forcep Fenestrated Medium ( Double Action ) Dia 5Mm Length 40 Cm With Fibre Handle Button Ratchet , Atraumatic Grasping Forcep Fenestrated Medium ( Double Action ) Dia 5Mm Length 30 Cm With Fibre Handle Button Ratchet , Needle Holder T.C. Curved Jaw Left Axial Handledia 5 Mm Length 30 Cm , Needle Holder T.C. Curved Jaw Left Axial Handledia 5 Mm Length 40 Cm , Atraumatic Grasper Allies ( Std Serration Jaw ) Serration, Dia 5Mm Length 30 Cm With Fiber Handle Button Ratchet , Allies ( Std Serration Jaw ) Grasping Forcep Fhbr 5Mm 40 Cm , Curve Scissor Metzabum Dia 5 Mm Length 30 Cm With Plain Fibre Handle , Curve Scissor Metzabum Double Action Dia 5 Mm Length 40 Cm With Plain Fibre Handle , 2 Way Suction Irrigation With Canula Dia 5Mm Length 30 Cm Shaft Non Insulated , 3 Way Suction Irrigation With Canula Dia 5Mm Length 40 Cm Shaft Non Insulated , Intermittent Catheters:With Lubricating Gel, Urine Collector, Made Of Dehp-Free Pvc, Silky Hydrophilic Coating, Based On Pvp, Blue Protective Catheter Sleeve, 1.3 Litre Urine Collection Bag Tip : Nelaton / Tiemann / Olive, All Size , Male / Female, All Sizes, Ce Approved. , Foley Catheter 2Way Made Of Silicon 6Fr, 8Fr, 10Fr, 12Fr, & 14Fr, 16Fr, 18Fr, 20Fr, 22Fr, 24Fr - Ce Approved, Transparent, Radiopaque Tip & Contrast Stripe, Valve For Luer & Luer-Lock Syringe Tips, Self Adhesive Documentation Labels, Sterile. , Infection Prevention Catheter ( Silicon ) Rusch :Made Of Silicone, Transparent, With Longitudinal Grooves For Drainage Of Urethral Secretion, With Prefilled Syringe For Balloon Inflation. Radiopaque Tip & Contrast Stripe Along The Catheter Shaft. Sterile, Single Use. Latex Free.Ce Approved. , Closed Urinary Drainage System, Rusch Infection Prevention Technology ( Silicon ) , Disposable 2000Ml, Length Of Tube 120Cm With Silicon Foley Catheter, Bacteria-Proof & Liquid-Tight Ventilation At The Bag, Flat Needle-Free Urine Sampling Port, Ce Approved. , Mechanical Rotatable Heart Valves For Both Aortic And Mitral Heart Position Available In Sizes 17 Mm To 33Mm. Bi-Leaflet And Rotatable. Protrusion Of Leaflets From The Housing Is 3.4Mm.Wall Clearance – 6.6Mm 85°. U.S Fda Approved.Pyrolytic Carbon. Patented Butterfly Upstream Pivot Design , Conduit Double-Velour Woven Fabric Offers Excellent Sealing Handling And Healing Characteristics.Collagen Impregnation Provides Uniform Tissue In-Growth And Biocompatibility. Rotatable Valve Attached. Cuff Configuration. Us. Fda Approved.Sizes: 19Mm To 33 Mm , Annuloplasty Tricuspid Ring Tarp Available In Sizes 25Mm To 35Mm. Tricuspid And Mitral Repair. Double Velour Cuff . Full Flexible Ring Can Be Tailored.Posterior Support.Flexible Design.Secure Ergonomic Holder And Handle.Open Holder Facilitates.Us. Fda Approved , Mitralrigid Rasr Ring Repair Solutions Available In Both Flexible As Well As Rigid Forms. Rigid Ring Is A Full 3D Ring Which Creates Natural Saddle Shape. Titanium Alloy Core.Polyester Cuff..Unique Triangular Core.U.S Fda Approved Rings.Sizes 22Mm To 34Mm. , Mitral Semi-Rigid Sarp Ringhas Three-Dimensional Flexibility. Preserve The Physiologic Movement Of The Valve Annulus.Sewing Ring Fabric: Polyester Double Velour.Core: Polyethylene.Sizes 24Mm-40Mm. Secure Ergonomic Holder And Handle Quickly Attach And Detach To Save Time During Implant.Solid, One-Piece Inner Core Resists Needle Penetration And Reduces The Potential For Suturing Through The Core.Usfda , Aortic Tissue Bioprostheticbiological Heart Valves For Aortic Heart Position Available In Sizes 19Mm-27Mm.Good Fluroscopic Visibility. Viv Ready Future Intervention. Triple Composite Porcine . Anti-Calcification Treatment Linx Ac Technology. Lowest Profile 9Mm. U.S Fda Approved.Low Pressure Glutarldehyde Fixation. Polyester Ring.Reduce Leaflet Stress. , Mitral Tissue Bioprostheticbiological Heart Valves For Mitral Heart Position Available In Sizes 25Mm-33Mm.Triple Composite Porcine Valves. Anti-Calcification Treatment Linx Technology. U.S Fda Approved.Low Pressure Glutarldehyde Fixation. Good Fluoroscope Visibility.Viv Ready Future Intervention.Lowest Profile 9Mm.Polyester Ring.Ratcheting System.Scalloped Inflow Surface. , The Endoscopic Harvesting System Should Be Designed For Use In Conjunction With The 7Mm Endoscope. Harvesting Cannula Should Have Four Lumens To House The Endoscope, C-Ring, Distal Lens Washer Tube & Bisector Bipolar Ligating Forceps For Ligation & Division Of Vessel Branches.C-Ring / Distal Lens Washer Should Be Independently Controlled By A C-Bisector Can Be Extended / Retracted Through The Main Cannula By Inserting It Into The Tool Adapter Port, And Rotated Independently.Bipolar Coagulation Should Be Achieved Using Electrosurgical Energy.Short Port Blunt Tip Trocar ( Btt ) Should Be Provided Which Is Used To Provide A Port Of Access For Insertion Of Endoscopic Instruments Into An Incision Site.Syringe Should Be Provided For Inflation / Deflation Of The Balloon. , Lb St. & Lb Bifurgated The World Only Dilatation Resistant , Gelatin Sealed , Koper Knitted Polyester Vascular Graft.Dramatically Reduced Dilatation , Superb Handling , Unique Rifampicin Ionic Bonding Options , Comprehensive Range Includes Supported Design . Gelsoft Plus , Lb Bifurgateed Bifurcate Grafts Has Unique Hydrolysable Gelatin Inpregnation , Proven Twillweave Base Fabric , Superb Handling , Excellent Suture Retention , Cardiothoracic And Abdominal Aplications . Gelweave , Lb St. Grafts Has Unique Hydrolysable Gelatin Inpregnation , Proven Twillweave Base Fabric , Superb Handling , Excellent Suture Retention , Cardiothoracic And Abdominal Aplications . Gelweave St , Branch Design , Aortic Arch Graftantegrade Flow Made Easy By The Perfusion Side Branch May Offer 1 ) Reduced Incident Of Temporary Neurological Deficits , Preventive Effect Against Embolic Stroke , Potential For Reduced Operating Time . Gelweave Plexus ( 4 Branches ) , Endovascular Stent Graft For Abdominal Aortic Aneurysms Approved At 90 Degree Neck Angulation, 2- Magnet Wire Cannulation For Contra Side, 3-Repositionability Of Graft Even After The Deployment, 4- Three Piece Stent Graft System Usfda. Anaconda , Endovascular Stent Graft For Thoracic Aortic Aneurysms And Disectons Graft With Length Upto 250Mm, 2- Dual Sheath For Minimise The Trauma , 3- Pre- Curved At Proximal End For Tortuous Anatomy, 4-Deliver System With Precise Deployment, -4Mm Tapering Across The Length I.E. 100 / 150 / 200 / 250Mmusfda / European Ce. Relay Plus , Frozen Elephent Trunk Gelatin Coating To Achieve Hemostasis & Prevent Ozzing, Antegrade Perfusion Branch, Shorter Circulatory Time, -Ring Stent For Better Conformability To Angulated Descending Aorta, - Sienna Collar To Achieve Distal Anstomosis, Plexus Braches Separtely For Supra Aortic Vessel Anastomosis, Delivery System- Ineer Melleable Shaft Allow To Suit For Different Anatomy, - Guide Wire Port To Ensure The True Lumen Insertion For Dissection, - Short Handle To Allow Better Visualization Of Operation Field. Thoraflex Hybrid. , Venous Sinus Self Expanding Nitinol Stent. Hybrid Designfor Radial Force With High Flexibility.Electro Polishing.Radiopaque Marker.Anti Jump Technique.Braided Sheath And Flexible Tip.Rounded Edges.Independent Ring System.High Vessel Wall.Flash Link.Open Cell Design.Introducer 10Fr. Guide Wire 0.035. 10, , 12, 14, 16, 18, Mm 60 / 80 / 120 / 150 Mm. 100 Cm , Venous Sinus Xl Self Expanding Nitinol Stent. Use In Ivc, Svc, And Aorta. Close Cell Design.High Radial Strength.Tantalum Marker .Anti Jump Technique.Radiopaque Marker.Braided Sheath And Flexible Tip.0.035. 14 & 16Mm Stent Should Have 6F Profile. 18Mm And Above Stent Should Have 10 F Profile.14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36 Mm 40 / 50 / 60 / 80 / 100 Mmx 100 Cm , Venous Sinus Obliquus Self Expanding Nitinol Stenthigh Flexible With Good Strength.Power Crown. Homogeneous Force Distribution.Anchor Ring. For Venous Obstruction Closeto The Bifurcation Of The Inferior Vena Cava. Anti Jump Technique.. Introducer 10F. Guidewire 0.03514, 16 80 / 100 / 150 Mm , Calcium Free ( Bss ) Balanced Salt Solutions In Non Pvc Bag 500 Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Periheral Line 1000Ml-1300Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Periheral Line 1400Ml-1600Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Periheral Line1800ml-2100Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Central Line 1000 Ml-1300Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Central Line 1400Ml-1600Ml , Triple Chambered Nutrition With Olive Oil Based Lipid Emulsion, Amino Acids, Glucose And Electrolytes Central Line 1800Ml-2100Ml , Rfa Probe Catheter Compatiblewith Available Machine. Demonstration Mandate. , Variable / Adjustable Compression Wraps Are Designed To Aide People Living With Lymphedema, Chronic Edema, Non Elastic Adjustable And Reusable Compression Therapy Wrap Mimics The 50% Overlap Pre Shaped Curved Straps For Upper Limb ( All Sizes ) , Variable / Adjustable Compression Wraps Are Designed To Aide People Living With Lymphedema, Chronic Edema, Non Elastic Adjustable And Reusable Compression Therapy Wrap Mimics The 50% Overlap Pre Shaped Curved Straps For Both Hand & Leg ( All Sizes ) , A Latex Free Two-Component-System Consists Of An Padding Compression Bandage Which Facilitates The Wok Flow And A Cohesive Compression Bandage With Patented Safe Lock Technology Works On High Working Pressure & Low Resting Pressure And Is Also Washable & Resuable. Consisting Of Soft Compression Bandage ( 10 Cm X 3.5 M ) As First Layer ;Cohesive Compression Bandage ( 10 Cm X 6 M ) As Second Layer. , Compression System For Treatment Of Lymphological Indications Of Upper And Lower Extremities Consisting Of 2 Soft Compression Bandage , Elastic Conforming Bandages 4 Cm X 4 M, Soft Comression Bandages 10 Cm X 2.5 M X 0.2 Cm, Foam Rubber Pad Bandage 10 Cm X 1 M X 1 Cm, Short Strech Bandage 6 Cm X 5 M , Short Strech Bandage 8 Cm X 5 M, Short Strech Bandage 10 Cm X 5 M, Short Strech Bandage12 Cm X 5 M , 100% Cotton Wrap Having Lengthwise Elasticity About 90%, High Air Permeability, Textured Fabric, Cream Colored, Can Be Washed Up To 50 Times At 90 Degree Celcius 6 Cmx5 Mtr , 100% Cotton Wrap Having Lengthwise Elasticity About 90%, High Air Permeability, Textured Fabric, Cream Colored, Can Be Washed Up To 50 Times At 90 Degree Celcius 10Cmx5 Mtr , 100% Cotton Wrap Having Lengthwise Elasticity About 90%, High Air Permeability, Textured Fabric, Cream Colored, Can Be Washed Up To 50 Times At 90 Degree Celcius 8 Cmx5 Mtr , Bileaflet Prosthetic Heart Valve With Curved Leaflets - It Should Be Curved Pyrolytic Carbon Leaflets. Aerofoil Housing Profile. Innovative Hinge Mechanism. Titanium Housing Coated With Carbofilm. Soft Carbofilm Coated Swing Ring. Should Have An Opening Angle Of 80 Degree. Should Be Fda / Ce Approved. Should Be In Use Universally For At Least 15 Years. Should Be Available In Aortic And Mitral All Sizes. , Bieaflet Aortic Valve With Conduit - Should Have Dacron / Polyester. Should Be Collagen / Gelatin Impregnated To Control Hemostasis And Reduce The Hemorrhagic Complications. Should Have Mechanical And Bioprosthetic Heart Valve With Low Pressure Gradients And Leaflet Opening 75 Degree And More. Should Have Minimum Taper Conduit To Facilitate Strong Coronary Anastomosis. Should Not Have Any Pleats To Allow Easier Positioning And Attachment Of The Coronary Arteries. Wide Range Of Sizes 19Mm To 33Mm. Should Have Both Ce And Fda Approval. Dacron / Polyester Graft 24Mm To 34Mm. , Tricuspid Ring 3D Rigid – Annuloplasty Ring For Tricuspid Repair. Should Be Rigid Three Dimensional Annuloplasty Ring Incomplete In Shape To Avoid Interference To Conduction System. Height Should Be Less Than 3.5Mm. Additional Septal Lateral Compression. Should Have Titanium Core Encapsulated With Silicon And Covered With Polyester. Size – 26Mm – 34Mm. Should Be Us Fda / Ce Approved. , Mitral Ring Semi Rigid – Composite Annuloplasty Ring For Mitral. Semi Rigid Remodeling Ring With Anterior Flexibility, Posterior Semi Rigid. Should Have Polyester Knit Covering Silicon Core. Eyelet Design To Avoid Ring Dehiscense Alloy Encapsulated With Silicon Core And Has Polyester Knit Covering. Size – 26Mm – 34Mm. Should Be Us Fda / Ce Approved. , Pericardium Heart Valve With Carbofilm Coated Sewing Cuff ( Mitral ) The Valve Should Be Bovine Pericardium Made Of Double Sheet Structure Of Pericardium. The Leaflet Of Valve Should Be Fixed On A Flexible Polymeric Stent Can Tolerate Under Back Pressure Of 2.000Mmhg The Sweing Cuff Should Be Coated With Carbofilm To Improve Hemo-Compatibilty. The Tissue Should Be Fixed With Glutraldehyde And Then Neutralized With Homocystic Acid. It Should Be Stored In A Paraben Solution And Should Not Require Rinsing Of The Valve. Size 25 To 31Mm , Bovine Pericardium Heart Valve With Crown Design ( Aortic The Leaflet Of Valve Should Be Fixed On A Flexible Polymeric Stent Can Tolerate Under Back Pressure Of 2.000Mmhg 2. Low Profile Height 3. Sweing Cuff Diameter Should Be Less 4.The Tissue Anti Calcification Treatment Should Be Fixed With Octanediol Solution 5. The Tissue Used In The Valve Should Be 100% Bovine Pericardium Only. Size 19-29Mm , Radiofrequency Induced Thermotherapy Based Catheter For The Treatment Of All Grades Of Different Kinds Of Varicose Veins From The Very Small Spider Veins And Perforating Veins To Great Saphenous Vein ( Gsv ) , Catheters And The Needles Are Connected To The Central Unit Which Generates The High Frequency Signal. Tissue Is Heated Between 80°C And 120°C Using Catheter. Catheter Should Visual And Audible Indication For Pull-Back. All Types Of Catheters Should Be Use In Single Generator / Machine For Treatment Of Different Kinds Varicose Veins, , Bovine Pericardial Patch - 8 Cm X 8 Cm, Should Be Glutaraldehyde Free. Should Be Stored In Buffer Solution. , Bovine Pericardial Patch - 6 Cm X 6 Cm, Should Be Glutaraldehyde Free. Should Be Stored In Buffer Solution. , Bovine Pericardial Patch - 4 Cm X 4 Cm, Should Be Glutaraldehyde Free. Should Be Stored In Buffer Solution. , All In One Closed Iv Catheter System With Pre-Attached High Pressure Extension Set ( Up To 300Psi ) ; With Two Split Septum, Closed System Needle-Less Connectors; Catheter Made Up Of Vailone With Indwelling Time Of Up To 144 Hrs.; Needle Tip Encapsulated In Plastic Cap For Nsi Prevention; ‘Insta-Flash’ Technology For Instant Flash Back. 20, 22G , Dual Port Closed Needless Connector With Split Spetum And Transparent Housing , Prefilled Terminally Sterile Single Use Device For Flushing Of Catheters With Heparinized Saline, Minimizing Break Loose Contamination, Pre Labelled And Pre Color Coded, Avoiding Medication Error, 10 Ml Diameter Barrel Size, Reducing Increased Flush Pressure, Heparin Is High Molecular Weight Heparin, Unfractionated, Compliance To Usp Standard. 5Ml 100 Iu , Prefilled Terminally Sterile Single Use Device For Flushing Of Catheters With 0.9% Saline Solution Having Standard 10 Ml Syringe Diameter With Design To Minimize Syringe Induces Reflux. Should Be Latex & Pvc Free.The Saline Should Be Preservative Free. 10 Ml , Prefilled Terminally Sterile Single Use Device For Flushing Of Catheters With 0.9% Saline Solution Having Standard 10 Ml Syringe Diameter With Design To Minimize Syringe Induces Reflux. Should Be Latex & Pvc Free.The Saline Should Be Preservative Free. 5 Ml , Prefilled Terminally Sterile Single Use Device For Flushing Of Catheters With Heparinized Saline, Minimizing Break Loose Contamination, Pre Labelled And Pre Color Coded, Avoiding Medication Error, 10 Ml Diameter Barrel Size, Reducing Increased Flush Pressure, Heparin Is High Molecular Weight Heparin, Unfractionated, Compliance To Usp Standard. 5Ml 10 Iu , Sternum And Ribs Lock Plate Should Be Available In Different Sizes And Shapes To Be Supplied With Applier ( Gun ) . Sample Based Selection. Should Be Us Fda Approved , Sternum And Ribs Lock Screw 2.4Mm And 2.7Mm Diameter Cancellous Self Drilling Locking Screws With Applier. Should Be Available In Different Sizes Sample Based Selection. Should Be Us Fda Approved , Eptfe Cv Patch - They Are Soft And Pliable For Easy Surgical Positioning And Multidirectional Oriented Node Fiber Structure They Have Exceptional Strength. Available In 0.4Mm And 0.6Mm Thickness & 3Cm X 6Cm And 5Cm X 7.5Cm Width, Usage In Cardiac And Peripheral Repairs. No Preclotting And Excellent Biocompatibility , Eptfe Pericardial Membrane – 6.0 Cm X 12.0 Cms X 0.1Mm , Eptfe Pericardial Membrane – 12.0 Cm X 12.0 Cms X 0.1Mm , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv2 , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv3 , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv4 , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv5 , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv6 , Cardio Vascular Suture Made Of Polyltetraflurothylene Double Ended Sizes Cv7 , Pta Dilatation Catheter Is A Semi-Compliant Balloon Catheter Consisting Of An Over The Wire ( Otw ) Catheter With An Angioplasty Balloon Fixed At The Distal Tip. Two Radiopaque Markers Delineate The Working Length Of The Balloon And Aid In Balloon Placement. In Tended To Dilate Stenoses In The Peripheral Arteries, To Treat Obstructive Lesions Of Native Or Synthetic Av Fistulae And / Or Re-Expand Endoluminal Stent Graft Elements In The Iliac Arteries. 3-12 Diameter Range And 20-300 Balloon Length. , Pta Dilatation Catheters Are Recommended For Use In Percutaneous Transluminal Angioplasty ( Pta ) Of The Renal, Popliteal, Tibi Al, Femoral, And Peroneal Arteries. To Facilitate Catheter Advancement Through The Vasculature And The Vessel Stenosis, Dual Layer Hydrophilic Coating Is Present On The Distal Segment Of The Shaft And The Balloon , Should Be Use In Percutaneous Transluminal Angioplasty Of The Femoral, Iliac, And Renal Arteries And For The Treatment Of Obstructive Lesions Of Native Or Synthetic Arteriovenous Dialysis Fistulae. High Performance Balloon Catheter Consisting Of An Overthe-Wire Catheter With A Balloon Fixed At The Distal Tip. The Proprietary Ultra Non-Compliant, Low Profile Balloon Is Designed To Provide Consistent Balloon Diameters And Lengths Even At High Pressures. Two Radiopaque Markers Delineate The Working Length Of The Balloon And Aid In Balloon Placement. The Coaxial Catheter Includes A Tapered Atraumatic Tip To Facilitate Advancement Of The Catheter To And Through The Stenosis , Should Be For The Treatment Of Atherosclerotic Lesions In Common And External Iliac Arteries With Reference Vessel Diameters Between 4.5 Mm And 12.0 Mm, And Lesion Lengths Up To 100 Mm. Balloon Expandable Vascular Covered Stent Is Comprised Of An Electropolished Balloon-Expandable Stent Made From 316L Stainless Steel, Encapsulated Between Two Layers Of Eptfe. The Covered Stent Is Supplied Pre- Mounted On An Over-The-Wire Delivery System With A Non-Compliant Balloon , Co2 Angiogaphy System. It Should Be Preset To 1.3Bar. It Should Enable A Safe Withdrawal Of Pure Medical Co2 From Gas Bottles. It Should Be A Two Stage Valve System. It Should Maintain A Safe And Constant Pressure. It Should Feature A Safety And Release Valve. Its Connectors Should Be Available In Various International Standards. It Should Have A 1.5M Length Gas Pipe Line With Connection To The Co2 Pressure Relief Valve. It Should Have A Special Stop Cock With 90Degrees Rotary Valve For Injection And Loading Procedure. It Should Have A Dose Chamber Adjustable In 20Ml Steps With A Locking Slider For Fixing The Desired Volume Setting. It Should Have A 1.5M Length Connection Tube To The Patient , Distaflo Cuff Bypass Graft Are Carbon Imregnated Inside And Promotes Natural Hemodynamics, Taper By 2Mm Over Distal End. Flex Small Beading For Torturous Anatomy And 18Mm Arteriotomy For Improved Flow And Increase Wall Shear Stress With Smooth Laminar Flow Available In 60, 70, 80 Cm Lengths , Soft Tissue Retractor And Protector With Green And White Rings , Perfadex Solution For Lung Transplant , Cell Saver Kit , Ecmo Disposable Kit Compatible With Existing Machine , Eco Active:Photocatalytic Dispersion Anti Bacterial Paint Free From Biocides And Pesticides It Should Produce Anti Bacterial, Anti Viral, Anti Fungal On The Surfaces Like, Furniture, Glass, Door, Walls Floor, Tiles Color Should Transluscent, Or Semi Transparent Should Clean Air & Surfaces Deodorise And Should Purifies The Air And Gives Permanent Effect For One Year With Detailed Proof No Flammable, Waterborne Invisible Ones Applied Density 1.01 Kg / L Does Not Create A Film, Yield : Around 20M2 / Lt, Application Temperature Between5 To 35 Degree And / Protect From Frost Test Report From International Acclaimed Certified Lab To Be Submitted. Product Should Be Make In India. The Product Should Be European Ce Certified. The Company Should Be En 1499:2013 , Alcohol Based, Quat Based Rapid Surface Wipes For Gadgets And Instruments For Surface Cleaning With Minimum Effectivity Time On Pathogens @ 30 Seconds To 5 Minutes Only And Ready To Use. The Wipe Size Should Be Min. 20Cm X 25Cm. Composition: - Each 100Gm Contains: 1-Propanol 30Gm 2-Propanol 45Gm Didecyle Dimethyl Ethyl Ammonium Chloride - 0.5Gm N-Alkyl Dimethylbenzyle Ammonium Chloride - 0.5Gm Poly Hexa Methylene Bigunide Hydrochloride- 0.5Gm • With Corrosion Inhibitors And Chelating Agents &Inert Ingredients Test Report From Nabl Certified Laboratory To Be Submitted. The Product Should Be Ce / Is Certified. The Product Should Be As Per En1500:2013 & Iso 9001 , Antimicrobial Sponge – It Should Be A Single Use Sterile Sponge Impregnated With 4% Chlorhexidine Gluconate Antiseptic Solution For Surgical Hand Disinfection And Skin Antisepsis. It Should Have Microbicidal Activity Against All Gram Negative And Gram-Positive Bacteria, Viruses And Fungi.Composition: -Chlorhexidine Gluconate-20% V / V With Organic Surfactant And Free From Sls With Moisturiser And Skin Softener. • Test Report From Nabl Certified Laboratory To Be Submitted. The Product Should Be Ce / Is Certified. The Product Should Be As Per En1500:2013 & Iso 9001. , Quat Base Aldehyde Free, Bleach Free, Rapid Surface Disinfectant For Medical Instruments & Electronic Devices. Composition: - Each 100Gm Contains: 1-Propanol 30Gm 2-Propanol 45Gm Didecyle Dimethylethyl Ammonium Chloride - 0.5Gm N-Alkyl Dimethylbenzyle Ammonium Chloride - 0.5Gm Poly Hexa Methylene Bigunide Hydrochloride- 0.5Gm • With Corrosion Inhibitors And Chelating Agents& Inert Ingredients. • Should Be Effective Against A Wide Variety Of Pathogenic Microorganisms Including Bacteria Antibiotic Resistant Bacteria, Virus, Fungus, Mould Etc. • Test Report From Nabl Certified Laboratory To Be Submitted. The Product Should Be Ce / Is Certified. The Product Should Be As Per En1500:2013 & Iso 9001. , Steriletransperantpolyurethaneadhesivecoatedsurgicalfilmwithsilverion Resistance To Ph Neutral Water Body Fluid, Detergent And Alcohol Transparent And Breathable Surface And Hold Drape Securely In Place Efficiencyupto24hr Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified . The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001 , Sterile Transperant Polyurethane Adhesive Coated Surgical Film With Povidone Iodine Resistance To Ph Neutral Water Body Fluid, Detergent And Alcohol Transparent And Breathable Surface And Hold Drape Securely In Place Efficiencyupto24hr Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified . The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries , Sodium Per Carbonate 43 Gm. Tetraacetyleehtylenediamine 22Gm. Oxygen Based Bleeching Agents>30% Non Ionic Surfactants <5% Phosphates <5% Edta And Salts Thereof, Enzymes Perfumes <5% Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified. The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries , Composition: Phosphoric Acid 25% And Cleaner. Instrument Strains Rust Remover With Chelating Agent With Amphoteric Solution Compatible With Manual And Ultrasonic Machine. Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified . The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001 , Composition: Chlorohexidinegluconate 20% V / W With Organic Surfactants And Free From Sls With Moisture And Skin Softener Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified . The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries , Nanosol Gel Polymer 60%C14, 30% C16, 5% C12, 5% C18, …….10% 68%C12, 32% C14………10% Inert Ingredient ………80% Usepa Registration Number Mandatory. Usepa Certificate Claim On N-Corona Virus To Be Submitted. Test Report From Internationally Acclaimed Certified Lab To Be Submitted. The Product Should Be Ce / Iso Certified. The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries. Certificate Should Be Authorized By A Member Of Multilateral Recognition Arrangement. American / European Certificate Of Free Sale Mandatory. Product Should Be Registered Under Fifra Section 3 ( C. ) 9 Under The Provisions Of Pr Notice 98-10. , Enzymatic Detergent Consists Of Neutral Ph. Or Low Alkaline To Which One Or More Enzyme Have Been Added Tosurfactant And Stabilizing Agent. Protease, Lipaseamylase Cellulose. Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified. The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries. , Nabo3-Nh2o 50% W / W Aldehyde Free, Biodegradable, Safe And Non-Hazardous. It Can Be Used For Sterilization In All Medicaldevice And Instrument Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified. The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries. , Chlorhexidine Gluconate 2% W / V Isopropyl Alcohol 70% V / V Test Report From Nabl Certified Lab To Be Submitted. The Product Should Be Ce / Is Certified. The Company Should Be En 1499:2013 Certified For Chemical Disinfectant And Antiseptics & Iso 9001:2015 By A Notified Body In Regulated Countries , Amino Acid 5% 250Ml Without Sorbitol And Xylitol , L- Arginine 10 Gm Sachet ( L- Arginine 3.5 Gm ) , Integra Is Cannulawithout Injection Port With 10Cmextension Line . , Minoxidil 2% , Minoxidil 5% , Minoxidil 10 % , Podophyliin Toxin , Sulphur + Calamine , Sunscreen ( Octinoxate, Avobenzone , Oxybenzone ) Spf 30 , Clotrimazole 10Mg , ( Medium Chain Triglyceride ) , Budesonide 200 Mcg. , Formeterol 6Mcg.+ Fluticasone 250 Mcg. Inhalation , Formoterol 6 Mcg. + Budesonide 200 Mcg. , Formoterol 6 Mcg. + Budesonide 400 Mcg. , Leosalbutamol 50Mcg.+ Ipratopium 40Mcg. , Levosalbutamol Inhalation Solution 50Ml / Gm , Lignocaine 1% , 1.5% Hydrogen Peroxide , Fluticasone Ft , Midazolam 0.5Mg / 5Ml , Neomycin Sulphate And Bacitracin Zinc Ointment Usp 5 Mg + 500 Iu / Gm , Sodium Chloride 0.9% 3000Ml ( N.S ) , Sodium Chloride Bottel 100Ml , Magnesium Sulphate, Sulphacetamide, Urea 75 Gm , Clobetasol+Salicylic Acid 0.5%+6% , Heparin 50 Iu Benzyl Nicotinate 2 Mg , Fluticasone , Neomycin, Polmyxin And Bacitracin Zinc Ophthalmic 15 Gm Ip , Tacrolimus 0 .03%15 Gm , Tacrolimus 0 .1% 15 Gm , Zinc Oxide +Alo Vera +Semethicone , Omega 3Fatty Acid 50Ml , Caffiene Citrate Oral Solution , Mercunium Chloride , Salicylic Acid 16.7% + Lactic Acid 16.7% , Coloplast60 Gm , Eeg 400Gm , Diclofenac Each Transdermal Patch Contain 200 Mg Diclofenac , Povidone Iodine , Milk Low Birth Formula , Recombinant Human Growth Hormone 4Iu Vial With Syringe , Enterogermina 2Billion Spores 5Ml , Formeterol 20Mcg +Budesonide 0.5Mg , Levosalbutamol 2.5 Mg +Ipratropium 500 Mcg 2.5 Ml , N-Acetylcysteine ( Nac ) 200Mg / Ml , Budesonide 0.5Mg / Ml , Budesonide 1Ml , Glycopyrronium 25Mcg. Inhalation 2Ml. , Sodium Chloride 3 % , Tiotropium Bromide Dry Powder30 / Pack , Revolizer / Rotahaler Device , Root Canal Sealer ( Calcium Carbonate ) , Fosfomycin3gm , Hmffor Pretem , L-Arginine+Proanthocynadine Granules 3Mg , Polyethyene Glycol + Sodium Chloride+Sodium Bi Carbonate+Potassium Chloride , Racecadotril Sachet 30 Mg , Etanercept 25Mg / 0.5Ml , Polyethyene Glycol With Elctrolyte Approx 130Gm , Lidocaine10%20Ml , Superoxidized , Mesalazine , Glycerin2 Gm / Ml , Paracetamol 170 Mg Each Suppsitory Contain Paracetamol 170 Mg , Cefaclor Each 5 Ml Contain Cefaclor 125 Mg , Codienephosphate , Amlodipine Oral Solution 1 Mg / Ml , Artemether 40Mg + Lumefantrine 240 Mg 30Ml , B. Complex , Baclofen Oral Solution 5 Mg / Ml , Calcium Phosphate 200 Ml , Cefixime Oral Suspension50mg , Cefixime Oral Suspension 100Mg , Cefpodoxime Proxetil Oral Suspension 50Mg , Cefpodoxime Proxetil Oral Suspension 100Mg , Cefuroxime Axetil Oral Suspension 125Mg / 5Ml , Clarithromycin For Oral Suspension 125Mg / 5Ml , Cefoperazone 1Mg Inj. , Cyclosporine Oral Solution 100Mg / Ml , Rabbit-Atg ( Anti Thymocyte Globulin ) 250 Mg , Cyproheptadine200ml , Dextromethorphan Hcl + Chlorpheniramine , Diatrizoic Acid Salts & Meglumine 66% & Sodium 10% & Iodine Content 370 Mg / Ml 30 Ml , Drotavarine , Each 15 Ml Contains: Milk Of Magnesia 11.25 Ml+Liquid Paraffin 3.75 Ml170 Ml , Each 5 Ml Containing : Paracetamol 125 Mg + Ibuprofen 100 Mg 60 Ml , Enzyme 100 Ml , Esomperazole , Fluconazole Oral Suspension , Furosemide Oral Solution 10Mg / 30Ml , L-Carnitine 500Mg / 5Ml In 30 Ml , L-Carnosine 100Mg / 5Ml In 200Ml , Levofloxacin Oral Solution , Linezolid 100Mg / 5Ml In 30Ml , Mefenamice Acid 100Mg / 5Ml , Mefenemic Acid 50 Mg + Paracetamol 250 Mg / 60 Ml , Melatonin 60 Ml , Montelucast+Levocetrizine , Nitrofurantoin Oral Suspension 25Mg / 5Ml In 100 , Ondansetron Oral Suspension , Oxybutynin Oral Suspension5 Ml , Phenobarbitone 20Mg / 5Ml In 100Ml , Prednisoloneip 50Mg , Piracetam 500Mg / 5Ml In 100Ml , Potassium Magnesium Citrate , Ranitidine Oral Suspension , Rifaximin , Sodium Bicarbonate Oral Suspension , Sodium Picosulphate Oral Suspension , Sorbitol + Tricholine Citrate , Sucralphate , Triclofos Oral Suspension500 Mg / 5Mlin 30Ml , Ursodeoxycholic Oral Suspension 125Mg / 5Ml In 100Ml , Zinc Oral Suspension 20 Mg / 100 Ml , / Susp. Azithromycin Oral Suspension 100Mg / 5Ml , / Susp. Azithromycin Oral Suspension 200Mg / 5Ml , Midodrine 5Mg , Hydroxyurea 500Mg , Coq 300Mg ( Capsule Of Co-Enzyme Q10 With Lycopene, Selenium & Omega 3 Fatty Acid ) , Everolimus 5Mg , Everolimus 10Mg , Tacrolimus 0.25 , Nintedanib 150Mg , 6-Mercaptopurine 20 Mg , Acebrophylline Sr 200 Mg , Aceclofenac + Thiocolchicoside , Aceclofenac Sr 200 Mg , Aceclofenac+Paracetamol+ Serratiopeptidase ( 100+325+15 Mg ) , Afatinib 20 Mg , Afatinib 30 Mg , Afatinib 40 Mg , Alendronate Sodium 70 Mg , Alfuzosin 10 Mg , Alpelisib 150 Mg ( Monopoly ) , Alpelisib 200 Mg ( Monopoly ) , Alpelisib 250 Mg ( Monopoly ) , Amantidine 100Mg , Amisulpride 50 Mg , Apixaban 2.5 Mg , Apixaban 5Mg , Aripiprazole 10 Mg , Aripiprazole 5 Mg , Aspirinip 300 Mg , Aspirin Dispresible 325Mg , Atomoxetin 10 Mg , Atomoxetin 18 Mg , Atomoxetin 25 Mg , Atroxentine 250Mg ( Trientine Hcl ) , Axitinib 5 Mg , Bilastin 20 Mg , Biotin 5 Mg , Bosentan62.5 Mg , Bosutinib 500 Mg , Brivaracetam 50Mg , Buprinorphine 2 Mg , Calcium Acetate 667 , Calcium Folinate 15 Mg , Capmatinib 200 Mg ( Monopoly ) , Carbimazole 10 Mg , Cefixime + Potassium Clavulanate 200+125Mg , Cefpodoxime Proxetil 100Mg , Cefpodoxime 200Mg , Cefpodoxime Cv 375 , Chlordiazepoxide 25 Mg , Chlordiazsepoxide 10 Mg + Clidinium 25 Mg , Chlorthalidone 6.25 Mg , Cholchicine 0.5Mg , Cilostazol 50Mg , Cilostazol 100Mg , Clarithromycin 250 Mg , Clarithromycin 500Mg , Cilnidipine 5 Mg , Cilnidipine10 Mg , Cilnidipine 20 Mg , Clonazepam 0.25 , Clonazepam 1Mg , Clozapine 25 Mg , Clozapine 50 Mg , Clozapine 100 Mg , Cotriamazole 480Mgs , Cyproheptadine 4Mg , Cyproterone Acetate 2 Mg +Ethynil Estradiol. 035Mg , Dabigatran 150 Mg , Dabigatran 110 Mg , Dabrafenib 50 Mg , Dacomitinib 15 Mg ( Monopoly ) , Dacomitinib 30 Mg ( Monopoly ) , Dapagliflozin 10 Mg , Dapoxetine 30 Mg , Dapsone 100 Mg , Deflazacort 6Mg , Deflazacort 12 Mg , Desvenlafaxine 50Mg , Diclo & Sera& Para. , Diclofenac + Thiocolchicoside , Dienogest 2Mg , Diltiazemprolonged Released90mg , Dimethyl Fumarate120 Mg , Dimethyl Fumarate 240Mg , Disulfiram 125 Mg , Disulfiram 250Mg , Donepezil 5 Mg , Duloxetine Gastro Resistant 20 Mg , Duloxitine Gastro Resistant30 Mg , Dydrogesterone 10Mg , Eltrombopag 25Mg , Eltrombopag 50Mg , Empagliflazone 10Mg , Empagliflazone 25Mg , Entacapone 200 Mg , Erlotinib 150 Mg , Erlotinib 100Mg , Esomeprazole 40 Mg , Estradiolvalerate 2 Mg , Estradiolvalerate , Enzalupamide 40Mg , Ethynil Estradiol 0.02Mg+ Tab Desogestral 0.15Mg , Etizolam 0.5 Mg , Etoricoxib+Thiocolchicoside ( 60+8 Mg ) , Exemestane 25 Mg , Febuxostat 40 Mg , Febuxostat 80 Mg , Fexofenadine120 Mg , Fexofenadine180 Mg , Fingolimod 0.5 Mg , Fludrocortisone 100Mcg , Flunarizine 10Mg , Fluvoxamine 100 Mg , Fluvoxamine 50 Mg , Folinic Acid 15Mg , Formaline , Furosemide 20Mg + Spironolactone 50Mg , Glucosamine Hydrocloride + Diacerin 50 Mg , Ibrutinib 140Mg , Indomethacin 75 Mg Sr , Inositol + Myoinositol 1000Mg , Ivermectin 6 Mg + Albendazole 400 Mg , Ivermectin 6Mg , Ivermectin 12Mg , Ketoconazole 200 Mg , Lacosamide 50 Mg , Lamotrigine Dispersible 100Mg , Lapatinib 500Mg , Lenalidomide25mg , Lenalidomide 10 Mg , Lenvatinib 4 Mg , Lenvatinib 10 Mg , Levetiracetamip 250 Mg , Levodopa+Carbidopa 125 , Levodopa+Carbidopa+Entacapone 100Mg / 25Mg / 200Mg , Levofloxacin 750 Mg , Levosulpride 75Mg , Levothyroxine Sodium25 Mcg , Levothyroxine Sodium75 Mcg , Linaglipitin 2.5Mg , Linaglipitin 5Mg , Lopinavir 200Mg+Ritonavir 50 Mg , Loratadine 10 Mg , Lorlatinib 25 Mg , Lorlatinib 100 Mg , Megestrol Acetate 160 Mg , Melatonin 3 Mg , Melphalan 2Mg , Metolazone 5Mg , Methimazole5 Mg , Methimazole10mg , Methotrexate 7.5Mg , Methotrexate 15Mg , Methylphenidate 10 Mg , Methylprednisolone4mg , Methylprednisolone 16Mg , Methylprednisolone 8Mg , Meverberine 135 Mg + Chlordiazepoxide 10 Mg , Midostaurin 25 Mg ( Monopoly ) , Mirabegeron 25 Mg , Mirabegeron50 Mg , Mirtazapine 7.5Mg , Mirtazapine 15Mg , Mifepristone25mg , Montelukast 4Mg , Montelukast 5 Mg , Montelukast 10 Mg , Morphine10mg , Morphine30mg , Moxifloxacin400 Mg , Moxonidine 0.2 Mg , Moxonidine 0.3 Mg , N-Acetylecystine Effervescent Form, Orange Flavour, 600 Mg , Naltrexone50 Mg , Nebivolol 5Mg , Nebivolol 10Mg , Nicorandil 5Mg , Nicoumalone 1 Mg , Nicoumalone 3 Mg , Nicoumalone 4 Mg , Nifidipine 20Mg , Nifidipine 20Mg Sr , Nilotinib 150 Mg ( Monopoly ) , Nilotinib200 Mg ( Monopoly ) , Nilotinib 300Mg ( Monopoly ) , Nitazoxanide 500Mg , Nitrazepam 5Mg , Nitrazepam 10 Mg , Olaparib 50 Mg ( Monopoly ) , Olaparib 150 Mg ( Monopoly ) , Olmesartan Medoxomil 20 Mg , Orciprenaline 10 Mg , Osimertinib 80 Mg ( Monopoly ) , Oxcarbazepine 300Mg , Oxcarbazepine 450Mg , Oxazepam 15Mg , Pancreatin Gastroresistant 10, 000Mg ( With Proteiase & Amylase ) , Pantoprazole 20Mg , Paracetomol 650 Mg , Paroxetine 12.5Mg , Paroxetine 25Mg , Pazopanib 200Mg , Pazopanib 400Mg , Penicillin V 400Mg , Pentoxifylline Extended Release / Sr 400Mg , Perampanel 2 Mg , Perampanel 4Mg , Pheniramine 25 Mg , Phenozopyridine 200Mg , Pirfenidone 200 Mg , Pirfenidone 400 Mg , Piroxicam Dt 20Mg , Pomalidomide 2 Mg , Pomalidomide 4 Mg , Posacozazole 100Mg , Posacozazole 40Mg / Ml , Prasugrel 10Mg Tab , Prazosin 5Mg , Prednisoloneip 40Mg , Primidone 50 Mg , Primidone 250 Mg , Prochlorperazine 5Mg , Progesterone Only Pills , Propranolol 10Mg , Propranolol 40 Mg Sr , Propylthiouracil 100 Mg , Pyridoxine100 Mg , Ranolazine 500Mg , Rasagiline1mg , Regorafenib 40 Mg , Repaglinamide 0.5Mg , Repaglinamide 1Mg , Ribociclib 200 Mg ( Monopoly ) , Rifampicin 150 Mg , Rifampicin 450 Mg , Rifampicin 600 Mg , Rifaximin 200 , Rifaximin 550Mg , Rivaroxaban 10Mg , Rivaroxaban 15Mg , Rivaroxaban 20Mg , Rizatriptan 10Mg , Ropinirole 0.25Mg , Rosuvastatin 10Mg + Fenofibrate 160Mg , Ruxolitinib 5 Mg , Ruxolitinib 10 Mg , Ruxolitinib 15 Mg , Ruxolitinib 20 Mg , Selegiline 5Mg , Serratiopeptidase 10Mg , Serratiopeptidase 20 Mg , Sevelamer Carbonate 800 Mg , Sildosin + Dutasteride , Silymarin 70Mg. , Sitagliptine + Metformin ( 50 / 500 ) , Sildenafil 20 Mg , Sofosbuvir 400 Mg+ Velpatasvir 100 Mg , Solifenacin Succinate10 Mg , Sorafenib 200 Mg , Sultamicin 375 Mg , Sunitinib 12.5 Mg , Sunitinib 25 Mg , Sunitinib 50 Mg , Tacrolimus 1Mg , Tamsulosin + Dutasteride , Tapentadol50mg , Tegafur + Uracil 100 Mg , Tetrabenazine 25Mg , Ticagrelor 90Mg , Tofacitinib 5 Mg , Tolvapatan 15Mg , Topiramate50mg , Torsemide20mg , Tramadol 37.5Mg + Paracetamol 325Mg , Trametinib 0.5Mg + Davarafenide 150Mg ( Monopoly ) , Trimetazidine 35Mg , Trimetazidine 60Mg , Trypsin + Rutoside+Bromelain , Verapamil Hydrochloride Sustained Release 40 , Verapamil Hydrochloride Sustained Release 120 , Vildagliptin 50Mg , Voglibose 0.2 Mg Tab , Voglibose 0.3 Mg Tab , Warfarin 1Mg , Warfarin 2Mg , Warfarin 3Mg , Zinc 50Mg , Zolpidem 10Mg , Zonisamide 50Mg , Zonisamide 100 Mg , Tiotropium 9Mcg Inhaler , Human Albumin 20% In 50 Ml Vial , Tetanus Vaccine ( Adsorbed ) Ip In 0.5 Ml , Inj. Piperacillin 400Mg & Tazobactam 500Mg , Inj. Meropenam 1Gm , Inj. Ceftriaxone 1Gm , Usg Guided Nerve Stimilation Needle ( 360 Ultra ) , 811 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 812 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 813 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 814 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 815 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 816 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 817 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 818 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 819 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 820 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 821 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 822 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 823 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 824 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 825 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 826 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 827 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 828 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 829 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 830 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 831 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 832 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 833 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 834 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 835 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 836 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 837 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 838 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 839 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 840 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 841 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 842 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 843 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 844 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 845 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 846 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 847 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 848 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 849 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 850 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 851 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 852 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 853 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 854 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 855 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 856 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 857 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 858 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 859 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 860 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 861 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 862 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 863 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 864 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 865 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 866 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 867 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 868 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 869 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 870 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 871 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 872 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 873 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 874 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 875 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 876 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 877 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 878 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 879 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 880 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 881 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 882 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 883 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 884 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 885 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 886 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 887 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 888 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 889 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 890 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 891 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 892 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 893 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 894 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 895 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 896 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 897 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 898 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 899 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 900 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 901 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 902 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 903 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 904 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 905 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 906 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 907 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 908 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 909 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 910 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 911 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 912 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 913 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 914 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 915 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 916 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 917 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 918 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 919 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 920 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 921 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 922 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 923 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 924 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 925 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 926 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 927 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 928 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 929 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 930 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 931 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 932 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet ) , 933 Item No. ( Detailed Description As Per Technical Specification And Compliance Sheet )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Rajasthan View Result →
37.
Housing Urban and Rular Development #10510979 Price Bid
Urgent Re-Construction Of 3.0Mts Span Rcc Culvert Near Land Mark Supermarket At Cuchelim Under Mapusa Constituency In Bardez Taluka. Urgent Re-Construction Of 3.0Mts Span Rcc Culvert Near Land Mark Supermarket At Cuchelim Under Mapusa Constituency In Bardez Taluka. , Demolishing Cement Concrete 1:3:6 Or Richer Mix Inclding Disposal Of Material Within 50M Lead. , Earthwork In Excavation Of Foundation Of Structures Of Culverts, Abutments Piers, Retaining Walls Etc. As Per Drawing And Technical Specification, In All Types Of Strata Comprising Any Of The Material Such As Soil, Silt Sand, Clay, Gravel, Murrum Of All Varieties Shingles, Pebbles All Types Of Conglomerates, Laterite Rock Etc Soft Rock, Ordinary Rock Or Disintegrated Rock Fissured Shattered / Decomposed Rock Or Weathered Rock All Such Material As Described Under Appendix To Those Specification Either In Full Or In Parts As The Case May Be Adopting Mechanical Means ( Hydraulic Excavator ) Or Any Approved Method Or Methods As The Case May Be Convenient Or Permitted Inclusive Of Chiseling And Wedging Etc In All Conditions Such As Dry, Moist, Saturated, Submerged, Foul Condition Etc Including Setting Out, Construction Of Shoringand Bracing, Removal Of Stumps And Other Deleterious Matter, Dressing Sides, Ramming Of Bottoms, Getting Out The Excavated Soil / Rock To Be Leveled And Neatly Dressed, Pumping And Bailing Out Of Water, Back Filling The Excavated Earth To The Extent Required And Utilizing The Remaining Earth Locally For Road Work, Barricading, Danger Lightening, Guarding And Disposal Of Excavated Earth As Directed By The Engineer In Charge All Complete Including All Leads And Lifts And Up To Depth Of Excavation As Per Mort&H Specification 304 , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing And Laying In Position Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 40 Mmnominal Size ) Excluding Cost Ofcentering, Shuttering And Finishing :A ) All Works Upto Plinth Level . , B ) In Retaining Walls , Return Walls ( Any Thk ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Reinforced Cement Concretework ( 1:11 / 2:3 ) ( 1 Cement:11 / 2 Coarse Sand: 3 Graded Granitic Or Basaltic Aggreate 20Mm Nominal Size ) In Suspended Floors, Roofs, Landings, Shelves And Their Supports And Balconies Upto Floor Five Level Including Finishing And Plastering The Ceiling With C.M. ( 1:3 ) ( 1 Cement: 3 Fine Sand ) Of Thickness Not Exceeding 6Mm To Give A Smooth And Even Surface But Excluding The Cost Of Centering And Shuttering. , Providing High Yield Strength Steel Reinforcement Bar ( Hysd ) / Tmt Steel Reinforcement Bar From Secondary Producers ( Confirming To Is 1786 Of 1986 ) For Rcc Workincluding Bending, Binding & Placing In Position In All The Floors Alongwith The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : I ) Foundations, Footings, Bases For Columns. , B ) Vertical Surfaces Such As Retaining Walls , Return Walls, Partition Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, And The Like. , Iv ) Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Xiii ) Suspended Floors, Roofs Landings, Shelves & Their Supports , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall, Wing Wall And Earth Retaining Structure Complete As Directed By The Engineer In Chargeb ) 75Mm Dia , Refilling The Pipeline / Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer In Charge. , Providing And Fixing 40 Mm Dia G.I. Pipe Railing In 3 Rows Complete With G.I. Fittings Incl. Painting Of Pipes And Fittings With White Paint Of Approved Quality Incl. A Priming Coat With A Ready Mixed Primer For New Works Incl. Providing R.C.C. 1:2:4 Rail Posts Of Size 0.15 X 0.15 X 1.00 M With Base Of 0.25 X 0.25 X 0.3 M At Every 2 Mts Intervals And Double Rail Post With A Bar Drawings Inclusive Of Cost Of Reinforcement Etc. All Complete Including White Wash Washing Of Rail Posts Etc. All Complete. ( To Be Procured Through Ghrssidcand Payment Will Be Released On Submission Of Invoice ) . , Construction Of Embankement With Approved Material Obtained From Borrowpits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacting With Static Roller To Meet Requirement Of Table 300-2 As Per Morth Specification 305 , Supplying Of Laterite Stone Soling Of Size 150-200 Mm Size And Murrum Having P.I. Value Not More Than 6 And Laying Including Packing With Smaller Stones And Consolidation With Power Road Roller Including Spreading, Watering And Consolidation Of Binding Material Etc. ( Measurements Shall Be Considered On Finished Item ) . , Providing And Laying 50Mm ( Consolidated Thickness ) Full Grout Using Granitic Or Basaltic Stone Of Specified Grading At 6.00 Cu.M. Per 100 Sq.M. Grouting With Hot Bitumen Straight Run Bitumen ( Or With Such Bituminous Material Of Grade And Type As Specified By The Engineer-In-Charge ) At 5.0Kg. Per Sq. M. Binding With Key Aggregate Of Granitic Or Basaltic Stone Of Specified Grading At 1.5 Cu.M. Per 100 Sq.M.Including Providing And Laying Seal Coat Sealing The Voids In A Bituminious Surface Laid With F.E Loader With 1 Cu.M. Bucket Capacity To The Specified Levels, Grade And Cross Fall Using Type Aseal Coat With 0.98 Kg / Sqm Of Bitumen Of Grade As Per Mort&H Specifications Clause513.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Goa View Result →
38.
Rural Development #10501963 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Khed Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
39.
Rural Development #10501960 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Sawali ( S ) Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Sawali ( S ) Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
40.
Rural Development #10501956 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Ghonsara Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Ghonsara Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
41.
Rural Development #10501838 Price Bid
Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Satara Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 / Yavat_Satara Regarding The Appointment Of Holder Of Material Supply For All Work In The Grampanchayat Satara Tq Arni Under The Mahatma Gandhi National Employment Guarantee Scheme For The Financial Year Of The Year 2021-22 / Yavat_Satara , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Pump Set Of Capacity 4000 Litres / Hour , Vibrator ( Needle Type 40 Mm ) , Hire And Running Charges Of Tripod And Mechanical Winch Machine Complete With Power Unit And Accessories , Hire And Running Charges Of Tipper , Hire And Running Charges Of Loader , Hydraulic Excavator ( 3D ) With Driver And Fuel , Pin Vibrator , Hire And Running Charges Of Light Crane , Hire And Running Charges Of Crane 20 Tonne Capacity , Water Tanker 5000 Ltr. Capacity , Dozer D-80-A12 , Hydraulic Excavator Of 1 Cum Bucker , Front End Loader 1 Cum Bucket Capacity ( Incl Pol ) , Vibratory Roller 8 To 10 Tonne , Smooth Wheeled Roller 8 To 10 Tonne , Water Tanker 5 To 6 Kl Capacity , Air Compressor , Hire Charges Of Tata 407 Or Equivalent For Local Shifting , Hire Charges Of Diesel Truck - 9 Tonne ( Without Pol ) , Welding Charges Of Shear Key To Existing Reinforcement , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Stone Aggregate ( Single Size ) : 40 Mm Nominal Size , Stone Aggregate ( Single Size ) :25 Mm Nominal Size , Stone Aggregate ( Single Size ) :20 Mm Nominal Size , Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size , Stone Aggregate ( Single Size ) : 10 Mm Nominal Size , Stone Aggregate ( Single Size ) : 06 Mm Nominal Size , Safeda Ballies 125 Mm Diameter , Bamboo 25 Mm Dia 2.5 Meter Long , Bitumen Grade Pmb - 40 , Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality , Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 , Blasting Powder , Blasting Fuse ( Fuse Wire ) , Portland Cement , White Cement , Sealant Primer , Brass Tower Bolt ( Barrel Type ) 250X10 Mm , Brass Tower Bolt ( Barrel Type ) 200X10 Mm , Oxidised Mild Steel Sliding Door Bolt 250X16 Mm , Anodised Aluminium Butt Hinges 125X75x4 Mm , Cement Concrete Jali 50 Mm Thick , Dry Hydrated Lime ( Factory Made ) , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre , Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre , Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre , Dry Distemper , Oil Bound Washable Distemper / Acrylic Distemper , Linseed Oil ( Double Boiled ) , Cement Primer , Pink Primer ( For Wood ) , White Cement Based Putty , Aluminium Paint , Enamel Paint , Synthetic Enamel Paint In Black Or Chocolate Shade , Plastic Emulsion Paint , Water Proofing Cement Paint , Wax Polish ( Ready Made ) , Ordinary Varnish , Superior Copal Varnish , Superior Spar Varnish , Putty For Wood Work , Royalty For Good Earth , Coarse Sand ( Zone Iii ) , Fine Sand ( Zone Iv ) , Mild Steel Round Bar 12 Mm Dia And Below , Mild Steel Round Bar Above 12 Mm Dia , Twisted Steel / Deformed Bars , Structural Steel Such As Tees, Angles, Channels And R.S. Joists , Galvanised Steel J Or L Hooks 8 Mm Dia , Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head , Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts , Bolts And Nuts Up To 300 Mm In Length , Bolts And Nuts Above 300 Mm In Length , Rolling Or Ramming Of Ground Turf ( Grass , Through And Bond Stone Size 24 X 24 X 39Cm , Stone For Masonry Work , Stone For Pitching 15 Cm X 22.5 Cm , Stone Grit 6 Mm And Down Size Or Pea Sized Gravel , Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks , Water Proofing Materials , Wire Mesh ( Rabbit ) , Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) , Rubber Base Adhesive , C.I. Bracket For Wash Basin And Sinks , Brass Bib-Cock-15 Mm Dia , Brass Stop-Cock 15 Mm Dia , S.C.I. Gully Or Nahani Grating 100 Mm Dia , Mirror Of Superior Make Glass 60X45 Cm , Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , G.I.Tees ( Equal ) 25 Mm , S.C.I. Plain Bend 100 Mm Dia , G.I. Union 15 Mm Nominal Bore , G.I. Union 20 Mm Nominal Bore , G.I. Union 25 Mm Nominal Bore , G.I. Union 32 Mm Nominal Bore , G.I. Union 40 Mm Nominal Bore , R.C.C. Pipes Np2 Class 1200 Mm Dia , R.C.C. Collars Np2 Class 450 Mm Dia , R.C.C. Collars Np2 Class 600 Mm Dia , R.C.C. Colllars Np2 Class 800 Mm Dia , R.C.C. Collars Np2 Class 900 Mm Dia , R.C.C. Collars Np2 Class 1000 Mm Dia , R.C.C. Collars Np2 Class 1200 Mm Dia , Rcc Pipe 450 Mm Dia Np -3 Spigot , Rcc Pipe 600 Mm Dia Np- 3 Spigot , Rcc Pipe 900 Mm Dia Np - 3 Spigot , Rcc Pipe 1000 Mm Dia Np -3 Spigot , Rcc Pipe 1200 Mm Dia Np - 3 Spigot , Rcc Pipe 900 Mm Dia Np- 4 Spigot , Rcc Pipe 1000 Mm Dia Np- 4 Spigot , Rcc Pipe 1200 Mm Dia Np- 4 Spigot , Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia , Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia , Vitreous China India Type W.C. Pan Size 580 Mm , Vitreous China Orrisa Type W.C. Pan Size 580 Mm , Bolts And Nuts 16 Mm Dia 60 Mm Long , White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable For Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications , Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size , Brasshanging Type Door Stopper 150 Mm , Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 , 6 Mm Thick High Performance Glass , Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section , Galvanised Steel Corrugated Sheets , Primer ( For Gypsum Board ) , Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) , Rolling Shutters Of 80X0.90 Mm Laths , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) , Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings , C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Upvc Coupler For Upvc Drainage Pipes 110 Mm , Melamine Polish , 30 Mm Thick Prelaminated Flush Door Shutter , Binding Wire , Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessoriesand Flush Pipe ) , Anodising 25 Microns On Aluminium Sections , Powder Coating 50 Microns On Aluminium Sections , Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm , Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality150 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia , Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia , Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia , Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia , Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia , Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia , Pvcblind Pipe 150 Mm Dia As Per Is: 12818 , Water Supply Tanker Of 5000 Litre Capacity , Turpentine Oil , Coloured Inter Locking C.C. Paver Block , Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. , Matt Finished Vitrified Tile 100X100 X16 Mm , Vitrified Tile , Adhesive Chemical , Acrylic Polymer Chemical For Cracks , Pvc Pipe - 20 Mm -150 Mm Long , Bitumen Primer For Bitumen Membrane , Stainless Steelbutt Hinges 125X64x1.9 Mm Is: 12817 Marked , Acrylic Exterior Paint , Metal Primer ( U.G. ) , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia , Autoclaved Aerated Cement ( Aac ) Blocks , Uv Stabilised 2 Mm Thick Plain Frp Sheet , Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) , Coarse Sand , Stone Aggregate 40 Mm Nominal Size And Above , Tar Bitumen , Gravel 40 Mm Dn , P.V.C. Pipe 75Mm Dia 4Kg Pressure , Stone Ware Pipe 150Mm Dia , Steel Tme Fe 500 , Shuttering ( Centaring ) , Sismopactor , Through Stone , P.V.C.Pipe 110 Mm Dia 4Kg , Nail Iron All Size , Corner Stone 38*20*30 , Coloured Cement ( Pigment ) , R.C.C.Pipe 800 Mm Dia Np32.5 M Long With Coller Irc , Mosquito Proof Nylon Net , Texture Material , Wagon Drill , Guiniting Gun , Calcet Powder , Black Oxide Powder , Gypsum Powder , Synthetic Paint ( Redy Mix ) , French Polish , Water Jet With Accessories , Cpcv Pipe 40Mm Dia. , Bleaching Powder , Potassium Permanganate , Nylon / Pvc Gasket , Plastic Bucket , Gunny Cloth , R.C.C. Chamber Cover With Frame 90*45 Cm Hevy Duty 225 Kg , R.C.C. Chamber Cover With Frame 90*45 Cm Medium Duty 140 Kg , Brick Ii Class , Half Round Earthware Pipe 100 Mm ( 60 Cm Long ) , Plumber With Tools Skilled , C.I. Cover With Frame ( Gully Trap ) , Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) , Aggregate 40 Mm ( Hand Broken ) Blasted , Stone Ware Pipe 100 Mm Dia , Stone Ware Pipe 225 Mm Dia , R.C.C. Pipe Np2 Class 100 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 150Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 225 Mm Dia. 2M Long , R.C.C. Pipe Np2 Class 300 Mm Dia. 2M Long , C.I.Man Hole Cover 75 Kg , R.C.C. Chamber Cover With Frame 60Cm*45Cm Medium Duty140 Kg , C.C.Septic Tank 0.9 Dia ( 2.5M Long ) , Polydee-Tp42 Primer , Ag10 Granules , Rough Shahabad 50 To 60 Mm Thick , Rough Shahabad 25 To 30 Mm Thick , Pvc 160Mm Dia. Pipe 2 Meter Long , Acrylic Polymer Modified Waterproofing Powder , Bitumen 85 / 25 Grade , Grit ( Add Below 5.6 ) , Cement Morter , Bitumen Felt , Glass Plain 3 Mm , Jungle Wood ( Non Teak ) Normal , Jali Welded Mesh 50*25 11 Guage , Clamp For G.I.Pipe 25 Mm , Clamp For G.I. Pipe , G.I.Pipe 100 Mm Dia. Medium Type , Clamp For G.I. Pipe 100 Mm , G.I. Pipe 100 Mm Dia. Heavy Type , Pvc Nahani Trap 75 Mm , Pvc Nahani Trap 150 Mm , Black Bakelite Seat To European Closer , Pvc Pipe 32 Mm Dia. 10 Kg. Pressure ( Class 4 ) , Half Turn Flush Cock 25 Mm , Colour European Type W.C.Pan , Low Level Flush Pr. St. 10 Ltr. , Anglo Indian W.C. Pan White , Fibre Flushing Tank For W.C. , P.V.C. Cowl 100 Mm , Sand- Crushed , Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap , Ultra 250 Mm. Dia. Upvc Cover & Frame , Upvc Blanking Plug 110 Mm , Upvc 90 Degree Bend , Rubber Lubricant , Ultra Shaft 250X470 Mm , Ultra 450 Mm Dia. Polypropylene Multiple Inlet Inspection Chamber Base , Shaft Pipe 450Mm Dia. 460Mm Height Of Hdpe Material , Rcc Cover & Frame 175 Kg. , Upvcblanking Plug 160 Mm , Upvc Insitu Adapter 100 Mm ( F ) , Upvc Eccentric Reducer 200 X 160 Mm , Upvc Eccentric Reducer 250 X 160 Mm , Upvc Eccentric Reducer 315 X 200 Mm , Ultra 600 Mm Dia.Polypropylene 315 Mm St. Through, 600 Mm Inbuiltshaft Chamber , Eco- Drain 110 Mm Sn 8 Nu- Drain Upvc Pipes , G.I. Screw 75 Mm , Socket Brass For 32Mm Tap , Chromium Plated 12 Mm Dia. Bib Cock , Lead Pipe 32 Mm Dia. , Bottle Track Chromium Plated 32 Mm Dai , Stainless Steel Sink Of Size 600*510*200 Mm Of Nirali Or Equivalent Make , Alluminium Screw 32*6 Mm , Alluminium Screw 25*6 Mm , P.V.C. Gasket For Glass , Socket For 15 Mm Tap , C.P.2-Way Bib Cock Jaquar Make Continental ( Cat. No. Con-041 ) , C.I Bend 100 Dia , Ghana Teak Wood , Glass Plain 5Mm , 12 Mm Flexble Inlet Pipe Connection , Fiber Flushing Tank For W.C , G.I Screw 40 Mm , G.I Clamp 12 Mm To 32Mm , C.I Pipe 20 Mm Dia Soil Heavy Type , C.I Pipe 15 Mm Dia Soil Heavy Type , C.I Pipe 100 Mm Dia Soil Heavy Type , Half Turn Flush Cock 25 Mm Dia , Towel Rod With Clamp 16 Mm Dia , Both Side Polished Kadappa Stone 25 Mm Dia , Nut Bolt 16 Mm Dia / Nail / All Size , Formica 1.5 Mm Thick , All Frame Rail Angle Anodized , Bitumen Pad 25 Mm Thick 1.20*1.20 , Hold Fast Iron 300*40*5 Mm , C.P. Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) , Socket For 25Mm Tap , Fibre Glass Mesh , Pile Boaring Machinary 325 To 400 Mm Dia , A.C. Block Of Size 625*240*225 , Jointing Mortar Of Fix Block , Skilled Labour , C.I.Bend 100Mm Dia , Low Level Flush Pr. St. 10 Ltr , European Type Wall-Hung White Closet , Push Valve 32Mm Size Of Jaquar Make , Neeru / Shanala , P.V.C. Pipe 20 Mm Dia. 10Kg Pressure ( Class Iv ) , P.V.C. 110Mm Rain Water Pipe 6Kg Pressure , Ovel Type Under Counter Wash Hand Basin Of 16 Inch *22 Inch Size , Telephonic Black / Coloured Granite Of 18 Mm Thick Stone , Kadappa Frame Work , Chromium Plated Coupling Bottle Trap Using Cera Company Model No 3448 , G.I. Screw 50Mm , Alluminium Section , Stainless Steel Plate , Acrylic Polymer Modifield Liquid , Polydee-Tp40 Primer , Polydee-Lm 150Mm Width , Bituflex Cloesdcell Foam 30*30 Mm , Pin Header ( Standard Size ) , Ecolite Of Size 625*240*225 , Hollow Block Cc 0.1*0.2*0.4 , Hollow Block Cc ( 0.2*0.2*0.4 ) ( 0.3*0.2*0.15 ) , Wooden Slipper Test ( 5*0.20*0.10 ) ( 5*5*0.1 ) , Luster Paint ( M ) , Clorophyriphos , Lightening Conductor ( Earthing ) , Gelatin 80 Percent , Electric Detonator @1 Detonator For 1 / 2 Gelatin Stick Of 125 Gms , Credit For Excavated Rock Found Suitable For Use @ 50 Percent Quantityblasted , Lock For Sliding Shutter , All Bearing Roller , Powder Coating , All Frame Rail Angle , Structural Steel , Oil Enamel Paint , Teak Wood Battens 50*25 Mm , Welding Electrodes , Tower Bolt Aluminium 200Mm , Handalstainless Steel 100 Mm , Hinge Stainless Steel 125 Mm , Tower Bolt Stainless Steel , Steel Primer , Cold Rolled Door Frame1829*610 , Bushes Of Tur / Cotton , Vertical Post 100 Mm Dia , 100 Mm Dia Balli For Rafter , Sand Blast Gun Nozzel , Karva ( For Roof And Sides ) , Bamboo Mating , Guard Stone , Sand Blasting Without Royalty , Use Rate Of Water Hose 20 M , Admixtures @200Ml Bag Of Cement ( 1594 X0.20 ) / 50=6.376 Lit , Guiniting Equipment , Pump Set ( 5 To 9 Hp ) , Crew For Guiniting , Use Rate Of Spining Belt , Spining Machine , Energy Charges For Spining Machine , Total Station ( Cost Including Gst ) , Steel Tape ( Cost In Gst ) , G.C.I Sheet Corrugated 24 Bwc , G.I J And L Hooks 6 Mm Dia , G.I. Washer , A.C. Corrugated Sheet 6 Mm Thick , Utima Tiles , Hanger Wire ( 2.68 Mm Dia., 1.8288 M Long ) , Bioguard Tegular False Ceiling Tiles ( 600X600x15 ) , Optra Edge Tiles , Dune Edge Tiles , Fine Fissured Edge Tiles , T.W. Balli 100 Mm Dia. , Polishman Ii Class Semi Skilled , Plain A.C. Sheet 4 Mm Thick , Alluminium Grill / Jali Of Heavy Type 100 X100 Mm , All Frame Rail Angle With Powder Coating , Nylon / Pvc Gasket , Level Adjustment Clip Size 85 X 35 X 0.8 Mm , Proflex Sheet 0.85 Mm Bmt Imported Galvalume 350 Mpa, A2 150 With Alloy Coating , Painting , Polister, Top Coat 25 Micron And Bottom Coat Of 12 Micron , Sky Light 0.2 Millimeter Thick Polycarbonatesheet Of Size 2 X7 ( 5 X0.60X2.13 ) / 674 Sqm , Turbo Ventilator 24 Dia. To Be Installed , Mazdoor Heavy Skilled , Pannel Roofing, Fabrication, Auto Seaming And Installation , Bituman Pressure Distributor @ 1750 Sqm Per Hr , Hydraulic Self Propelled Drip @1500 Sqm Per Hr For 4500M X 259M = 9000 Sqm , Finish Rolling With 6-8 Tones Smooth Wheeled Tandem Roller , Ntw For Frame , T.W. Planked 12 Mm , N.T.W. Planked 12 M , N.T. Wooden Battern , Laches 250 Mm , Wooden Fram , Country Tiles , Tile Turner , Hanger Rod 4 Mm Thick , Upvc Ridge / Hip Tiles , Upvc 3 Layer Trapazoidal 2.00 Mmsheet , Alluminium Sheeting Sheet With Encapsulated Type Reflective Sheeting Including 2 % Towards Lettering , Cost Of Angle Iron , Cost Of Drilling Holes, Nuts Bolts Etc And Signs An Applicable , Nut Bolt Washers 12 Mm Dia.45 Mm Long , Iron Washer 12 Mm To 16 Mm , Jali Chicken Mesh , Wire Glass 6 Mm Thick , Bitumen Ng 30 Tin ( 60 / 70 ) , Tarat 36 Width ( Gummy Cloth ) , G.I. Clamps 80 Mm , Decorative Board Of Plaster Of Paris , Practical Board B.W.P. Phinol Bend 12 Mm Thick , Manglore Pattern Cowl Vantilator , Manglore Glass Tiles , A.C. Sheet Rigde , Aluminium Stay 25Cm , G.I.Screw 25 Mm , Aluminium Sheet 24 B.W.G. , Rubber Lining , Hydraulic Floor Spring , Locking Arrangement , Spinning Machine Crew , Fuel Charges For Spinning Machine , Coles Mobile Aneas , Ledges 4Cm Thick , Ntw For Sill , T.W. Particle Board With Laminated Face , C.P. Sink Cock , Pvc Pipe 160 Mm , P.V.C. Water Stopper 310 Mm Wide , G.I.Sheet 24 Gauge , Shalitex Sealing Compound , Shalitex Super Expansion Pad 12Mm Thick, 27.5Cm Wide , Sinc Base Oil Paint , M.S. Pickaxe , Empty Cement Bag , Dungri Cloth , Wooden Pegs , Resin Sunpoxy , Drill Rod Rate Use 1.6 M Length , Explosive Small Dia , Electric Detonator , Detonating Fuse Coil , Welding Holder , Grinding Machine , Fixed Charge Of Welding Transformer , Elbows, Nipple, Plug , Vulcnizing Materil , Hydrolic Self Propelled Chip Sprider @ 1500Sqm / Hour , Bitumin Pressure Distributor , Bitumen Pressure Distributor , Marble Chips , Coarse Sand As Per Is:[email protected] Cum / Cum Of Concrere , Kerb Casting Machine @60 Metres / Hour , Concrete Batching And Mixing Plant @15 Cum / Hr. , Coarse Sand 30 Per Cent , Air Compressor 280 Cm , Jack Hammer , Electrician / Linemen , Geletin 80 Percent , Concrete Cement Tank , Material Cost Rs 1 / - Per Unit. , Frp Door Shutter 30Mm Tk Factory Made Shutter , Frp Door Shutter 35Mm Tk Factory Made Shutter , Aggregate 90Mm To 45Mm , Boulder Of Size 300Mm , Quarry Stone 150-200Mm Size , Jali Welded Mesh , Np2 Pipe 450Mm Dia 2.5M Long , Np2 Pipe Collar Of 450Mm Dia , Aggregate 90Mm To 45Mm , Rcc / Pvc Tank Of Size ( 0.9X1.2 ) M Od , Rcc / Pvc Tank ( 0.75X0.90 ) M.Od , 80Mm Laterite Stone Metal , 60Mm Laterite Stone Metal , Laterite Stone , Ordinary Detonators , Electric Detonators , Jack Hammer For Drilling With Compressor , 8 To 10 Mt Power Roller For 100Mm Loose Metal , 8 To 10 Mt Power Roller For 200Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 100Mm Loose Metal , 8 To 10 Mt Vibratory Roller For 200Mm Loose Metal , Hire Charges For Boring Machine , Hire Charges Of V Notch For Yield Test , In Well Bore Machine Hire Charges , P.V.C. Pipe 140Mm Dia. ( 4 Kg / Cm2 ) , Permissible Machinery For Farm Pond , Door Stopper ( Stainless Steel ) , Vision Panel , Eye Hole Lens , White Glazed Wash Hand Basin ( 55X50 ) Cm , P.V.C Connector15mm Dia , Handle Stainless Steel ( 100Mm ) , S.S Sliding Door Bolt 250 , Powder & Chemicals For Colour Anodizing Process Of Aluminium Section , Country Teak Wood , C.I.Nahani Trap , Bib Cock Stop Tap Brass Heavy 20Mm , Socket For 20 Mm Tap , Wheel Stop Tap Brass 25 Mm , Eco- Drain 110 Mm Sn 8 Nu - Drain Upvc Pipes , Steel Centering For Foundation. ( Per Cum Of Concrete ) , Steel Centering For Columns / Pillars ( Per Cum Of Concrete ) , Steel Shuttering For Lintels, Beams, Girder, Plinth Beam, Cantilever. ( Per Cum Of Concrete ) , Steel Shuttering For Roof, Landing, Balcony Having 12.5Cm Tk ( Per Cum Of Concrete ) , Electric Vibrator , Single Toilet Unit , Vitrified Tile ( Matt Finish ) . Size 590 To 605Mm X 590 To 605Mm X 8 To 10Mm. , Tile Cutting Machine , Pvc Pipe 160Mm Dia ( Rain Water Pipe ) , Water Tank H.D.P. Container Syntex Or Alike , Jaali Fly Proof , Stop Tap Brass With Crunch Wheel 15Mm Dia. , Piller Tap 12Mm Dia. Chromium Plated Heavy , Power Roller For 80Mm Laterite Metal. , Power Roller For 60Mm Laterite Metal.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
42.
Educational and Research Institute #10488347 Price Bid
Development Of Iot Lab At Nsut East Campus Geeta Colony, Delhi 110031--- 1 Civil Work: 1 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall / Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C / C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per AnufacturerS Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With :12.5 Mm Thick Tapered Edge Glass Reinforced Gypsum ( Grg ) Board Conforming To Is: 2095- ( Part 3 ) :1996 ( Boards With Bis Certification Marks ) 2 2 Providing & Fixing False Ceiling At All Heights With Grg ( Glass Fibre Reinforced Gypsum ) False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design And Patterns Having Moisture Content Less Than 2%, Humidity Resistance Of 99%, Nrc0.50 To 0.75 As Per Is 8225:1987, Non Combustible As Per Bs 476 ( Part 4 ) -1970 And Light Reflectance Of 85% ( Minimum ) To Be Laid In True Horizontal Level Suspended On Interlocking Metal T-Grid Of Hot Dipped Galvanised Iron Section Of 0.33Mm Thick ( Galvanized @ 120 Grams Per Sqm Including Both Sides ) Comprising Of Main-T Runners Of Size 15X32 Mm Of Length 3000 Mm, Cross - T Of Size 15X32 Mm Of Length 1200 Mm And Secondaryintermediate Cross-T Of Size 15X32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanisedmild Steel Items ( Galvanizing @ 80 Grams Per Sqm ) I.E. 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x2 Mm.Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Center To Center And 40 Mm Long Dry Wall Wood Screws. The Work Shall Be Carried Out As Perspecifications, Drawing And As Per Directions Of The Engineer-In-Charge.With Semi Perforated 12 Mm Thick Micro Tegular Edged Grg False Ceiling Tiles. 3 3 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.One Coat 4 4 Providing And Placing Of Modular Workstations System Of Size 1500Mm ( W1 ) X 1500Mm ( W2 ) X 600Mm ( D ) X 750 Griha Compliant Having Following Specifications. - Main Partition Panel Having 4 Horizontal Blocks And Consists Of Vertical Extrusions 2Nos And Horizontal Extrusions 5 Nos Made Of 1.2Mm Thick Aluminium With Duly Powder Coated At Every Division Of Tile / Block. Each Panel Shall Have Bottom Frame Fabricated For 52.4Mm Panel Comprises Of 2 Nos. L-Channels Made Of 2Mm Thick Crca ( Cold Rolled, Cold Aneeled ) Steel ( Is: 513 ) , Formed Plates Of 3Mm Thick Hot Rolled Steel ( Is: 2062 ) & Erw Steel Tube Of Size 35X15x1.6Mm Thick In Oval Cross Section ( Is: 7138 ) Welded Together. The Complete Bottom Frame Shall Be Powder Coated With An Average Of 50-60 Microns Thickness Of Epoxy Powder Coating. The Bottom Frame Is Bolted With The Upright Verticals. Each Panel Is Provided With 2Nos Legs Of Height 120Mm Are Fixed At The Bottom Frame Of The Panel. Legs Construction-Adjustment Of The Height By 50Mm. It Will Be Coated With 45-50Micron ------------------------ Locking:10 Lever Cam Lock & Central Rh Locking With Actuator & Lock Channel Mechanism. Top Panel : 0.8Mm Thick Metal Straight Edge Top. Castors : Swiveling Non-Lockable 4Nos Castors Mounted Below The Body Shell. The Total Drawer Unit Is Finished With Epoxy Polyester Powder Coated To The Thickness Of 50 Microns ( + / -10 ) . The Product Should Be Complete And As Per Approved Sample And As Per The Direction Of Engineer-In-Charge. 5 Supplying And Placing In Position Faculty Table Of Following Specifications. Overall Dimension Of The Main Desk Shall Be - 1800Mmw X 750Mmd X 1050Mm Hthe System Shall Be A Desk-Based System With A Platform Understructure Made Up Of A Combination Of Ms. Tubes And Plates. The Product Should Be Greenpro Certified And Should Be Listed In Griha Product Catalogue In The Following Category Griha V.3 Criteria: 34; Griha V.2015 Criteria: 31 & Svagriha Criteria: 14. Understructure - The Slanted Legs Are Connected To The Understructure With The Help Of Pdc Connectors To Provide A Stable And Sturdy Base For The Worktops. Modesty Panel Shall Be Of Acrylic ( 8 Mm Thick Acrylic Both Side Frosted ) Or Of Metal 1.2 Mm Thick Crca. Worktop - Worktop Shall Be Made Of 25Mm Thick Pre-Laminated Board Conforming To Is: 12823. All The Edges Of Work Surface Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue.The Worktop Shall Be Complete With Provisions For Screen Mounting As Well As For Wire Management On The Workstation. Provisions For Fixing Of The Switches Shall Be On The Wire Tray / Channel. A Wire Management - It Shall Be A Part Of The Understructure And Can Be In The Form Of Enclosed Metal Tray Or 2 Level Enclosed Channel To Provide Concealed Wire Management Throughout The Cluster Formation. Wire Riser Leg Or Independent Wire Risers Shall Be Provided As Per The Layout Structure.Ccess Flaps With Soft Closing Technology Shall Be Provided On The Table Tops To Access The Switch Points On The Tray. Pedestal Having 3 Drawers Unit Having Flat Metal Front And Top With Central Locking. The Drawer Unit Consists Of 2Box And 1File Drawers. The Overall Size Of The Drawer Units Is 450Mm ( W ) X 435Mm ( D ) X 646Mm ( H ) . Construction & Material Of Drawer Unit :Welded Assembled Of 0.8Mm Thick Crca For Body Shell, Drawer Front & Tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2Mm Thick Crca Top Stiffene, Bottom Stiffener, Drawer Fronts & Metal Front Straight Edge. All Drawers With Double Extension Precision Ball Slide Shall Be Provided. For Drawer Pulling, Side Wise Tapered Recess Provided In Shell Behind Drawer Fronts. Locking:10 Lever Cam Lock & Central Rh Locking With Actuator & Lock Channel Mechanism. Top Panel : 0.8Mm Thick Metal Straight Edge Top. Castors : Swiveling Non-Lockable 4Nos Castors Mounted Below The Body Shell. The Total Drawer Unit Is Finished With Epoxy Polyester Powder Coated To The Thickness Of 50 Microns ( + / -10 ) . 6 6 Supplying And Placing Stool Of Following Specifications:The Seat Shall Be Made Up Of 1.2±0.1Cm Thick Flat Plywood With Moulded Polyurethane Foam And Are Upholstered With Replaceable Synthetic Leather Covers. The Dimensions Of Seat Shall Be Diameter 40.0 Cm And Adjustments Are 360° Revolving Type. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Upholstery Shall Be Available In Synthetic Leather. The Dimensions Of Back Shall Be 45.0 Cm ( W ) Covered With Polyurethane Foam. The Hr Polyurethane Foam Shall Be Moulded With Density = 45 + / -2 Kg / M3and Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Manual Height Adjustment Shall Be Very Easy To Operate With A Help Of A Knob. It Should Be Easily Locked At The Most Comfortable Position. The Five-Prong Pedestal Shall Be Fabricated From 0.2 ± 0.02 Cm Thick Hr Sheet ( Is : Dd 1079 / Hr ) , Powder Coated ( Dft 40-60 Microns ) And Shall Be Fitted With An Injection Moulded Black Polypropylene Hub Cap And 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 55.0±0.5Cm Pitch-Circle-Diameter ( 65.0±-1.0Cm With Castors ) , Circular-Foot-Ringof Dia 52.0±0.2Cm Shall Be Made Up Of Dia 1.9±0.2 X0.12±0.0096Cm Thk Ms Erw Tube For Foot Support In High-Base Stool.The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Shall Bewidth- 65.0Cm, Depth- 65.0 Cm, Height- 88.0 To 99.5 Cm, Seat Height- 67.0 To 78.5 Cm. 7 7 Supplying And Placing Revolving Chair With The Cushioned Seat Assembly Consists Of Seat Base Moulded In Glass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene In-Situ Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric.* Full Back Size : 45.5 Cm. ( W ) X 53.0 Cm. ( H ) *Seat Size :48.5 Cm. ( W ) X 47.0 Cm. ( D ) The Hr Polyurethane Foam Used In Seat And Back Cushion Is Moulded In Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf As Per 15:7888 For 25% Compression.The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi-Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjustments. The Cantilevered Seat Offers Impact Cushioning While Sitting And Synchronises With The Back Movement During Posture Changes. The 5 Shaped Spines Moulded In High Strength Glass-Filled Poly-Amide And The Spine Connector Moulded In Glass-Filled Poly-Am ) De Form The Back-Spine Structure Involved In Multi-Dimensional Recline Motion.The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limit Feature Which Is Inbuilt In Seat Base And The Tension ( Return Force ) Is User Weight Dependent. The Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glass-Filled Poly-Amide. The Height Adjustment Feature Is Button Operated Having Adjustment Of 6.6±0.5Cm. The Armrest Top Is Made Up Of Integral Skin Pu Moulded Over Plastic Inner Moulded In Glass-Filled Poly-Amide.The Seating Height Can Be Adjusted With A Pneumatic Gas-Lift Having An Adjustment Stroke Of 9.2 ± 0.3 Cmthe Pedestal Is Injection Moulded In Glass-Filled Poly-Amide And Fitted With 5 Nos. In Wheel Castors. The Pedestal Is 66.0±0.5 Cm. Pitch Centre Diameter And 76.0±1.0 Cm. With Castors. 5 Nos. Twin Wheel Castors Are Injection Moulded In Poly-Amide Having 5.0±0.1Cm Heel Diameter And Assembled To The Pedestal. The Product Shall Be From One Of The Approved Make Of Godrej, Hermanmiller, Steel Case, Delform Or Vitra Only. 8 8 Supplying And Placing Almirah Of Following Specifications : Almirah Steel Shall Have An Overall Size Of916mm ( W ) X486mm ( D ) X1980mm ( H ) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm ( High Yield Strength ) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Almirah Steel Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . Plenty Of Colour Options And Shelving Options Shall Be Available. 9 9 Supplying And Placing Locker Of Following Specificationsoverall Size Of 4 Door Locker Shall Be 380Mm ( W ) X450mm ( D ) X1830mm ( H ) .Stackability Shall Have Add- On Units That Can Be Stacked Width Wise To Form Bank Of Lockers Having Common Side Panel. Locking Shall Have 10 Lever Cam Lock With Lock Lever Plus Option Of Hasp Arrangement . Material Shall Be Crca 0.6 Mm Thickness . Construction Shall Be Rigid Knockdown Construction , Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum . Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns . Handle / Label Holder Shall Be Aesthetically Appealing Snap Fit Absplastic Handle . Ventilation Shall Be Attractive Punched Pattern For Ventilation . 10 10 Supplying And Placing Wall Storage Of Following Specifications Overall Dimensions Of Wall Storage 900 W Shall Be 900 Mmw X 328Mm D X 785 Mmh . The Construction Shall Be Aesthetically Appealing Completely Knock Down Construction Made From 0.6 Mm Thk. Crca As Per Is - 513 . Horizontal Stiffener Shall Be Made From 1.2 Mm Thk. Crca As Per Is - 513 . The Doors Shall Be Madefrom 18 Mm Thk. Interior Grade Pre-Laminated Board As Per Is - 12823 Or 18 Mm Thk . Plain Particle Board As Per Is -3087 With 0.6 Thk. With 0.6 Mmthk. Decorative Laminate And 0.6 Mm Thk. Backing Laminate As Per Is - 2046 On Either Side . All Edges Shall Be Duly Sealed With 2 Mm Thk. Pvc Edge Banding . Twodoor Withsingle Lockon Rhdoor . Locking Shall Be 10 Lever Cam Lock Lever At The Bottom Of The Door .Shelving Shall Be Heightwise Adjustable Shelf 1 No. Uniformly Distributed Load Capacity Of 25 Kg Udl .The Finish Shall Be Epoxy Powder Coated To The Thickness Of 50 Microns . The Doors Shall Be 448 Mm W X 18 Mm D X 783 Mm H Rh Side Door With Lock. 448 Mm W X 18 Mm D X 783 Mm H Lh Side Door W / Olock . The Doors Shall Be Madefrom 18 Mm Thk. Interior Grade Pre-Laminated Board As Per Is - 12823 Or 18 Mm Thk . Plain Particle Board As Per Is -3087 With 0.6 Thk. With 0.6 Mmthk. Decorative Laminate And 0.6 Mm Thk. Backing Laminate As Per Is - 2046 On Either Side . All Edges Shall Be Duly Sealed With 2 Mm Thk. Pvc Edge Banding .It Shall Have Two Door With Single Lock On Rh Door 11 11 Providing And Fixing Manual Chain Operated Roller Blinds Consisting Of 100% Polyester Fabric, Fabric Thickness 0.50 Mm Fabric Weight = 270 Gsm+- 5% , Fabric Width 230Cms, Tearing Strength 4.5 Kgf Warp, Bursting Strength 34 Kgf, Colour Fastness To Light 5 To 6 Grade In Position Of Standard Quantity And Approved Shade / Colour Including Necessary Accessories, Ms Clamps.Screws And Drilling Etc. As Required All Complete As Per Directions Of Engineer-In -Charge. ( Approved Make: Vista / Mac / Sd ) 12 Electrical Worksh-01 ( Wiring And Accessories ) 1 Wiringforlightpoint / Fanpoint / Exhaustfanpoint / Callbellpoint With1.5 Sq.Mmfrls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessedmediumclasspvcconduit, Withmodular Switch, Modularplate, Suitablegiboxandearthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.A Group C 13 2 Wiringforgroupcontrolled ( Looped ) Lightpoint / Fan Point / Exhaustfan Point / Call Bell Point ( Without Independent Switch Etc. ) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.A Group C 14 3 Supply And Fixing Suitable Sizegi Box With Modular Plateand Coverinfrontonsurfaceorinrecess Includingprovidingandfixing6pin, 15 / 16Amps Modular Socket Outlet And 15 / 16 Amps Modular Switch , Connection Etc . As Required . 15 4 Wiring For Light / Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessedmediumclasspvcconduitalong With1no.4Sq.Mmfrlspvcinsulatedcopper Conductor Single Core Cable For Loop Earthing As Required. 16 5 Wiring For Light / Power Plug With 4X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessedmediumclasspvcconduit Alongwith2nos.4Sq.Mmfrlspvcinsulated Copper Conductor Singlecorecablefor Loopearthing As Required. 17 6 Wiringforcircuit / Submainwiringalongwithearth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit Asrequired.A ) 2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 18 B ) 2 X 10 Sq. Mm + 1 X 6 Sq. Mm Earth Wire 19 7 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable Inthe Existing Surface / Recessedsteelconduitasrequired A ) 3 X 2.5 Sq. Mm 20 B ) 3 X 4 Sqmm 21 C ) 6 X 4 Sq. Mm 22 8 Supplying And Fixing Modular Blanking Plate , On The Existing Modular Plate & Switch Box Excluding Modular Plate Etc. As Required. 23 9 Supplying And Fixing Following Modular Switch / Socketontheexistingmodularplate&Switchbox Including Connectionsbutexcludingmodularplate Etc. As Required.A 5 / 6 A Switch 24 B 3 Pin 5 / 6 A Socket Outlet 25 10 Supplying And Fixing Following Modular Base & Coverplateonexistingmodularmetalboxesetc.As Required.A 3 Module 26 B 6 Module 27 11 Supplying And Fixing Following Size / Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required.A 12 Module ( 200Mmx150mm ) 28 Sh-02 ( Distribution Board ) 12 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 Volts, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted.A ) 6 Way ( 4 + 18 ) , Double Door 29 13 Supplyingandfixing5ampsto32amps, Rating, 240 / 415Volts, CCurve, Miniaturecircuitbreaker Suitableforinductiveloadoffollowingpolesinthe Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.A ) Single Pole 30 14 Supplying And Fixing Folowingrating Double Pole 240 Volts, Mcbin The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.A ) 63 Amp Doublepole Mcb 31 15 Supplyingandfixingfollowingratingdoublepole 240Volts, Residual Current Circuit Breaker ( Rccb ) , Having Sensitivity Of 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.A ) 63 Amp Dp Rccb 32 16 Supplying And Fixing 63 Amps Rating, 240 / 415 Volts, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.A Single Pole 33 17Supplying And Fixing Tpn Mcb 63 A Rating, 240 / 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required 34 Sh-03 Light / Fan Fixtures ) 18 Dismantling The Existing Worn Out / Defective Fittings From The Ceiling Andsitc Of Minimum 36 Watt Aluminium Slim Energy Efficient Led Panel Light Fitting Made Of Crca Sheet, Steel Housing Duly Powder Coatedhaving System Efficacy Minimum 100 Lumen / Watt Lm79, Color Temp 6500 Deg K, Symmetric Glare Free Full Opal Diffuser, Ip 20 Illumination In The False Ceiling, Recess Mounting Suitable For Fitting In The 600Mm X 600Mm Square Existing Space Having Complete With All Standard Accessories Including Drivers Etc. Complete As Required. 35 19 Sitc Of Minimum 20 Watt Aluminium Slim Energy Efficient Led Panel Light Fitting Made Of Crca Sheet, Steel Housing Duly Powder Coatedhaving System Efficacy Minimum 100 Lumen / Watt Lm79, Color Temp 6500 Deg K, Symmetric Glare Free Full Opal Diffuser, Ip 20 Illumination In The False Ceiling, Suspended Mounting Suitable For Fitting In The Existing Space Having Complete With All Standard Accessories Including Drivers Etc. Complete As Required. 36 20 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current ( Bldc ) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value ( Cmm / W ) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm ( Tolerance As Per Is : 374-2019 ) , Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C ( Max. ) , Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 37 Sh-04 ( Earthing ) 21 Earthing With Copper Earth Plate 600Mm X 600Mm X 3Mm Thick Including Accessories And Providing Masonryenclosurewithcoverplatehavinglocking Arrangementandwateringpipeof2.7Mtrlongetc With Charcoal, Coke And Salt As Required. ( For Computer Earthing ) 38 22 Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. 39 23 Providing And Fixing 25 Mm X 5 Mm Copper Strip In 40 Mm Dia G.I. Pipe From Earth Electrode Including Connection With Brass Nut, Bolt, Spring, Washer Excavation And Re-Filling Etc. As Required. 40 Sh - 05 ( Networking ) 24 Supplying And Drawing Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 1 Run Of Cable ( Make:- Commscope Systimax Only ) 41 25 Providing And Fixing 24 Port Loaded Straight Patch Panel Of Height 1U In The Existing Data End Rack Including Making Connections, Channel Labellingetc. Complete As Required. 42 26 Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.A Rj 45 Information Outlet 43 27 Supplying And Fixing Following Modular Base & Cover Plate On Existing Modular Metal Boxes Etc. As Required.A 1 Or 2 Module 44 28 Providing And Fixing Stranded Low Smoke Halogen Cordage Unshielded Cat 6 Modular Patch Cord Of Length 1 Mtr With Plug Insertion Life Not Less Than 750 Times And Minimum Plug Retention Force Of 133N I / C Making Connections Etc. Complete As Required. 45 29 Providing And Fixing Stranded Low Smoke Halogen Cordage Unshielded Cat 6 Modular Patch Cord Of Length 2 Mtr With Plug Insertion Life Not Less Than 750 Times And Minimum Plug Retention Force Of 133N I / C Making Connections Etc. Complete As Required. 46 30 Sitc Of12u Floor Mount Network Rack With Accessories ( Make:- Rittal / Apw / Emerson ) 47 31 Sitc Of 24 Port Non-Poe Managed Access Switchs Per Specifications In Annexure -A As Per Directions Of Engineer In-Charge 48 32 5 Years 24X7 Onsite Comprehensive Warranty And Support For24 Port Non-Poe Managedaccess Switch As Per Specifications Provided And Installed Under This Contract As Required. A ) For 1St Year 49 B ) For 2Nd Year 50 C ) For 3Rd Year 51 D ) For 4Th Year 52 E ) For 5Th Year 53 33 Suppling And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Inculding Cutting The Wall And Making Good The Same In Case Of Recessed Condit As Required.25Mm Pvc Conduit 54 34 Supplying And Fixing Of Upvc Trunking Of Size 100 X 50 Along With Accessories On Surface Complete As Required. 55 35 Dismantling & Buy Back Of Old & Defective Following Items As Per Required. A 4 X 1 Light Fitting. 56 B Ceiling Fans
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Delhi View Result →
43.
Housing Urban and Rular Development #10483440 Price Bid
Tender For Construction Of Two Class Room Building Pues At Mangankadu Habitation In Sundaranayagipuram Panchayat. Cfsids 2023-24; 1 Construction Of Two Class Room Building Pues At Mangankadu Habitationinsundaranayagipuram Panchayat.Cfsids 2023-24 2 Earth Work Excavation In All Class Of Soil Except Hard Rock Requiring Blastingwith Intial Lead And Lift Etc. Complete For Foundation As Per Ss 20A 3 Sand Filling With Good River Sand Including Cost And Conveyance Of All Materials And All Labour Charges For Etc Completed. 4 Cement Concrete 1 : 4 :8 Mix Using 40Mm Hbg Metal For Foundation Including Watering Wherever Necessary And Laid In Layers Of Not More Than 15Cm Thick., Compacting Etc., Complete Complying With Standard Specifications And As Directed For Base Course Below Wearing Course To Street. 5 Refilling The Approved Good Quality Earth In Plinths, Area Development Etc. Wherever Specified In Layers Is Not Exceeding 200 Mm Thick, With Available Earth At Site. 6 Supplying And Filling Of Good Earth Filling Locally Available Earth Transported From The Outside Including Consolidation, Leveling Specifiedin Layers Of Not Exceeding 200 Mm Thick., Etc. Complete. 7 Supplying & Erecting Centering For Sides & Soffiots Including Necessary Supports & Strutting Upto 3.29M Height For Plane Surfaces In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60Cm & 10 Gauge Stiffened, Complete Complying With Standard Specifications And As Directed By The Departmental Officers. Rate For 10M2.For The Following Items. ( Rcc Floor Slab, Roof Slab, Rectangular / Square, Tee / Ell Beams, Lintels, Staircase Waist Slabs, Landing Slabs, Landing Beam, Portico Beam Etc., ) . 8 Grade Beam 9 Sunshade&Loft, Lintel Beam And Roof Slab 10 Column 11 Cement Concrete 1:1-1 / 2:3 ( One Cement, One And A Half Crushed Stone M.Sand And Three Hard Broken Stone Jelly ) Using 20 Mm Gauge Hard Broken Granite Stone Jelly For All Rcc Items Of Works Excluding Cost Of Reinforcement Grill And Fabricating Charges Centering And Shuttering But Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary And Bearing Surfaces Of Walls, Beams Etc. Shall Be Finished Smooth With Cement Mortar 1:3 ( One Cement And Three M.Sand ) And Kraft Paper Laid Over It Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers 12 Foundation & Basement 13 Ground Floor 14 Steel - Fe 500 D: Supply, Fabrication And Placing Of Reinforcement Steel Of High Yield Strength Ribbed Bars Of Various Diameters And Grade Conforming To Is 1786 For Reinforced Concrete Work. The Work Includes Recoiling, Straightening, Cutting, Bending, Fabricating, And Placing In Position, At All Levels Including Lead And Lift, According To Drawings, Specifications Etc. Complete And Supply & Use Of 18G Black Annealed Binding Wire Double Fold To Tie The Bars In Position And Providing Precast Cement / Pvc Cover Blocks For Main Reinforcement To Ensure Specified Cover And Complete., Including All Labor Charges Etc As Directed By Departmental Officers. 15 Brick Work In Following Cement Mortar 1:5 Using Best Quality Ii Class Table Moulded Bricks 83 / 4 X 41 / 4 X23 / 4 For Foundation And Basement Including Curing Etc., Complete Complying With Standard Specification.Including Scaffolding Curing Cost Of Reinforcement Etc.All Complete As Per Specifications And Drawings As Directed By The Engineer In-Charge. 16 Foundation & Basement 17 Ground Floor 18 Brick Partition Walls Of 11.50Cm Thickness Using Best Qualityii Class Table Moulded Bricks 83 / 4 X 41 / 4 X23 / 4 In Cement Mortar 1:3 ( One Cement And Three Sand ) Using Hoop Iron Reinforcement If Found Necessary Including Curing Etc. Complete And As Directed By The Departmental Officers. 19 Ground Floor 20 Terrace Floor 21 Providing And Applying 10 Mm Thick Cement Plaster In Cement Mortar 1:3 ( One Part Of Cement And Three Parts Of Sand ) , To Finishing The Exposed Surfaces Of R.C.C. Items Of Works Such As Roof ( Or ) Floor Slabs, Beams, And Sun Shades Etc.To Correct Plane And Level Including Scaffolding, Hacking Of Surface, Chiselling The Undulated Surface Wherever Necessary And Curing Etc., All Materials And Labour Complete In All Respects Including All Lead, Lift And Descent And As Directed By The Enineer In Charge. This Rate Includes The Cost Of Providing Cement Mortar Beadings For Sun Shades, Steps, Landing Slabs, Elevation Etc. Complete Complying With Standard Specifications. 22 Providing & Applying 12 Mm Thick Cement Plaster In Cm 1:5 ( 1 Part Of Cement: 5 Parts Of Sand ) To Walls Internally In Single Coat At All Levels To Correct Line And Level Including Chicken Wire Mesh At All Joints Of Brick And Concrete Surfaces With Minimum Overlap Of 150 Mm In All Directions, Scaffolding, Rounding Off Or Chambering Of Corners, Offsets, Fin / Bands, Projections, Etc. And Cleaning Of Surface, Raking Out Joints, Roughening Of Surface, Chiseling The Undulated Surface Wherever Necessary And Curing, Etc., All Materials And Labor Complete In All Respects Including All Lead, Lift And Descent Andas Directed. 23 Providing & Applying 20 Mm Thick Cement Plaster In Cm 1:5 ( 1 Part Of Cement: 5 Parts Of Sand ) To Walls Externally In Single Coat At All Levels To Correct Line And Level Includingscaffolding, Rounding Off Or Chambering Of Corners, Offsets, Fin / Bands, Projections, Etc. And Cleaning Of Surface, Raking Out Joints, Roughening Of Surface, Chiseling The Undulated Surface Wherever Necessary And Curing, Etc., All Materials And Labor Complete In All Respects Including All Lead, Lift And Descent Andas Directed. 24 Paving The Floor With Best Approved Quality Fine Polished Shahabadstone Slabs Of Size 600 X 600 Of 18 / 20Mm With Machine Cut Edges And Matching Marble Slab Not Less Than 100Mm Width Other Than Adanga Marbles As Border Laid Over A Cement Mortar Bed Of 20Mm Thick Using Cement Mortar 1:3 ( One Cement And Three Sand ) Fixing The Slabs In True Right Angles With Minimum Possible Width Of Joints And Pointing The Joints With White Cement Mixed With Mathcing Colouring Pigments And Polishing With Floor Polisher To A High Degree Of Finish Etc., The Kota Stone Slabs And Other Materials To Be Used Shall Be Got Approved By The Executive Engineer Concerned Before Use On Work, Etc., Complete As Per Standard Speicification 25 Providing Granolithic Floor Finish In 1 : 2 : 4 Mix Using 20 Mm Hbg Metal For Foundation Including Watering Wherever Necessary And Laid In Layers Of Not More Than 15Cm Thick., Compacting Etc., Complete Complying With Standard Specifications And As Directed. - Rate For 10 M3 26 Fabricating, Supplying And Fixng In Position Of Steel Sheeted Windows ( Three Leaves ) With The Following Specifications. Outer Frames Of Windows Made Of Z Section F7d Of Size 33 X 25 X 3Mm At 1.419 Kg / M And Mullion J Section ( F4b ) Of Size 46X25x3mm At 2.28Kg / M And Shutter Section Of Made Off7d Of 33X25x3mm At 1.419 Kg / M As Specified In Is 7452 / 1990. Each Openable Shutter Should Not Exceed A Width Of 600Mm To Enable Separate Operations And Easy Maintenance. The Panel Of The Shutters To Be Covered With 18 Gauge Cold Rolled Sheet Of Superior Quality And Welded Intact With Shutter Frames. Horizontal Stiffeners Using 18X5mm Ms Flat At 0.70Kg / M At 3 Nos. For Each Shutter And Additional Diagonal Stiffners Of The Same Ms Flats At All The Four Corners Of Each Shutters To The Suitable Length Welded To The Shutters, For Holding The Cr Sheets In Position Firmly. 2 Numbers Of Sturdy Hinges And One Number Of Handle-Cum-Latch Of Special Type Made With 18X5mm Ms Flats Are Revetted To The Shutters At An Appropriate Height In Window. Suitable Opening Is Left For Its Easy Operation. A Stopper Square Rod For Handle Is Provided In The Mullion Section At Suitable Place To Catch The Window Handle. Each Window Shutter Having An Adustable Stay Made Out Of 18 X 5Mm At 0.70 Kg / M Ms Flat Of Lenght 320Mm With Three Adjustable Position. A Matching Peg Is Provided In The Outer Frame Of The Window At Suitable Place. 4 Nos. Of Hold Fasts Of 120Mm Length Spliced At The Ends Are Welded To The Outer Frame Of The Window By Using Ms Flat Of 18X5mm At 0.70Kg / M, Welded To The Shutter At Two Place Equivalent From Each From Top And Bottom Of The Shutter. An Ms Square Bar Of 12Mm Size Is Welded To The Inner Face Of The Window At An Equal Interval Not Exceeding 100Mm Edge Between Them. All Members Are Painted With One Coat Of Anti-Corrosive Red Oxide Primer As Directed By The Departmental Officers.All Sections Should Be In Confirmed With Is 7452 / 1990.The Cost Includes Cost Of All Materials, Labour Charges And Other Incidental Charges, Etc., Complete 27 Manufacturing, Supplying And Fixing Of Steel Doors With Following Specification.Ms Angle Of Size 40X40x6mm At 3.5 Kg / M Used For Outer Frame And Ms Angle Of Size 35X35x5mm At 2.6 Kg / M For The Shutter Frame.Stiffeners With 32X6mm At 1.5 Kg / M Ms Flat Is Provided As The Lock Rail Of The Door And Welded Intact On Both Ends To The Shutter Frame.18 G Cr Sheets Of Best Quality Is Laid As Panel In Theshutter Frames.18X5mm At 0.70 Kg / M Ms Flat Is Welded Over The 32X6mm At 1.50Kg / M Ms Flat On The Rear Side Of The Door, Sandwiching The Cr Sheet For Rigidity. Additional Stiffeners With 18X5mm At 0.7 Kg / M Ms Flats Are Provided Diagonally On The Rear Side Of The Shutter. 300Mm Length Ofhinges 2Nos, For Shutter Is Provided.6 Nos. Of 250Mm Length Hold Fasts 200Mm Length Specified At The Ends Are Welded To The Outer Frame Of The Door.Tower Bolt 2 Nos. At The Top Provided. 28 Supplying And Painting New Plastered Surface With Two Coats Of Distempering One Coat Of Distemper Primer 29 Supplying And Painting New Plastered Internal Wall Surface With Two Coats Of Distempering One Coat Of Distemper Primer 30 Supplying And Painting The Walls With One Coat Of Wall Primer And Two Coats Of Exterior Emulsion ( Apex Or Equivalent ) As Instructed By The Departmental Officers Including Preparation Of Surface Curing, Etc., Complete In All Floors Complying With Standard Specifications ( The Colour And Shade Of The Cement Paint Shall Be Got Approved By The Executive Engineer Before Use Of Work ) . 31 Weathering Coarse With Brick Jelly Lime Concrete Using 20Mm Brick Jelly With Slacked Lime In The Ratio F 32:12.5 Including Cost And Conveyance Of All Materials To Site And All Labour Charges For Mixing , Laying , And Finishing Etc Complete 32 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 230Mm X 230Mm X 20Mm Of Approved Quality Set In Cement Mortar 1:3 ( One Cement And Three Sand ) 12Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. 33 Painting New Iron Works Such As Steel Doors, Windows, Ventilators, Window Bars, Balustrades Etc., With Two Coats Of Best Approved First Quality And Colour Of Synthetic Enamel Paint Over The Existing Red Oxide Priming Coat In All Floors Excluding Cost Of Priming Coat Etc., Complete Complying With Standard Specification. ( The Make, Quality And Colour Of Paint Should Be Got Approved By The Executive Engineer Before Use On Works. ) 34 Supplying And Fixing Cuddapah Slab For Cupboard Shelf 35 Providing Cup-Board Shutter With Frame Using Termite / Water Proof Plywood Of 19Mm Thick Over Which Laminated Sheet Of 0.8Mm Thick Fixed Inside The Shutter And 1Mm Thick Fixed In The Outside Of The Shutter Using Fevicol Along With Necessary Furniture Fittings, Such As, Hydralic Hinges, Tower Bolt, Handles, Multi Purpose Locks Etc., As Directed By The Departmental Officers. The Design Pattern, Water Proof Plywood, Laminate Sheet And Other Materials Should Be Got Approved From The Executive Engineer Befoe Use On Wor 36 Supplying And Fixing Pvc Rain Water Down Fall Pipes Of Following Dia Meter Etc., Complete. 37 Electrification 38 Wiring 2 X 1.5 Sq.Mm ( 22 / 0.30 ) Pvc Insulated Unsheathed Sc.Cu.Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With Tw Switch Box With In Flush With Wall Covered With Hylem Sheet Of 3 Mm Thick With Painting Of Suitable Colour For Concealedpvc Light / Fan Point ( Sd No.25 ) 39 Supply And Fixing Of4-18Wled Tube With Fitting Inclusive Of All Charges 40 Wiring 2 X 1.5 Sq.Mm ( 22 / 0.30 ) Pvc Insulated Unsheathedsc.Cu. Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With Tw Switch Box With In Flush With Wall Covered With Hylem Sheet Of 3 Mm Thick With Painting Of Suitable Colour For Concealedpvc Plug Point ( Sd No.38 ) 5 Pin Plug Point 41 Wiring With 2 X 4 Sq.Mm. ( 56 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Cable Of 1100V Grade In Suitable Heavy Gauge Ms Conduit Pipe Concealed In Wall And Ceiling With Ms Accessories In Flush With Wall With 150Mm X 100Mm X 75Mm Ms Switch Box Concealed Type With 3Mm Thick Hylum Sheet Cover For 15A 3 Pin Flush Type Non Interlocking Cs Plug With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Rnaking Good Of The Concealedportion For Concealed Power Plug Point ( Sd No.15 ) 15 Pin Plug Point 42 Supply And Fixing Of 1200Mm Sweep Ac Ceiling Fan Complete With Stepped Electronic Regulator With 300Mm Down Rod On The Existing Clamp Sd 106 43 Supply And Fixing Of Water Tight Bulk Head Fitting With Guard ( Philips / Bajaj / Crompton / Klite ) Suitable For Incandencent Lamp And 60W Bulb ( Sd N0.83 ) 44 Supply And Run Of 2 Of 1.50 Sq.Mm Polythene Insulated Pvc Sheathed Heavy Duty Sc Copper Conductor Of 1100 V Grade On 7 / 20 Gi Bearer Wire For Service Connection Mains ( Sd No.64 ) 45 Supply And Fixing Of Tneb Meter Board Suitable For 32A Single Phase Service Connection With 32A Fuse Unit ( 500V ) 32A Neutral Link And Earth Link ( 1 X 1 / 8 Copper Flat ) On Tw Plank Of Size 375Mm X 300Mm X 19Mm With Supporting Tw Reepers Of 1 Thick An Either Side With Painting With Suitable Bolt And Nuts For Fixing The Tw Plank On Wall With Earth Connection And Inter Connection With 7 / 20 Pvc Insulated Copper Wire From Eb Meter To Fuse Unit. ( Sd No. 125 ) 46 Supply And Run Of 2X4 Sqmm ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Cu.Conductor Of 1100V Grade In 25Mm Dia Gi Pipe ( Class B ) Suitably Bent At Both Ends With Necessary Angle Iron Upright And End Supports For Mains Sd 70 47 Supply And Fixing Of 16 Amps Dp Switch Of500v With Metal Clad With Fuse And Neutral Sd 142 48 Sd 139 49 Sd 134 50 Sd 234 51 Plinth Protection 52 Earth Work Excavation For Foundation In All Clauses Of Soils And Sub Soils To Full Depth As May Be Directed Except In Hard Rock Requiring Blasting But Inclusive Of Shoring Strutting And Boiling Out Water Whenever Necessary Et Complete Complying With Standard Specification 53 Supplying And Filling In Basement With Filling Riversand In Layer Of Not More Than 15 Cm Thick Well Rammed Etc., Complete. 54 Cement Concrete 1:4:8 Mix ( One Cement Four Sand And Eight Aggregate ) Using 40Mm Gauge Handbroken Granite Tone Jelly For Foundation Including Dewatering If Found Ecessary And Laid In Layers Of Not More Than 15 Cm Thick And Compacted, Etc., Complete Complete 55 Brick Work In Cm 1:5, Using Country Bricks, Including Cost And Conveyance Of All Materials To Site And All Labour Charges For Mixing, Laying And Curing Etc Compete. 56 Providing Granolithic Flooring With Cc 1:2:4, Using 10-12 Mm Chips, 25 Mm Tk, Including Cost And Conveyance Of All Materials To Site And All Labour Charges For Mixing, Laying And Curing Etc Compete. 57 Plastering In Cm 1:5, 12 Mm Tk, Including Cost And Conveyance Of All Materials To Site And All Labour Charges For Mixing, Laying And Curing Etc Compete. 58 Gst Amount For Providing Service To Government Contract Works For The Above Construction Works. { Gst Amount Is The Total Gst Amount For Total Overall Quoted Amount Above This Row In Column Bb For All Works In This Package }
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
44.
Educational and Research Institute #10444070 Price Bid
Purchase Of Various Furniture Items For Offices, Class Rooms, Hostels And Labs At Chaudhary Ranbir Singh University, Jind Purchase Of Various Furniture Items For Offices, Class Rooms, Hostels And Labs At Chaudhary Ranbir Singh University, Jind , Executive Table ( A Type ) Specifications: Supplying & Placing Modular Table In Completely Knock Down Conditions With An Overall Size 2600Mm X 2100Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of 36Mm Thick ( Top ) And 9Mm Thick ( Base Top ) Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Base Of The Top Shall Be Covered With The Assistance Of 9Mm Thick Extruded Aluminum Frame On The Edges. Flapper Box Shall Be Enclosed At Table Top. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported On Particle Board Based Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 18Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Gable End Leg Shall Be Provided With 70Mm Width Made Up Of Extruded Aluminum Channel Having Aesthetically Appealing And Corrosion Resistance Property. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18 Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 1200Mm X 550Mm X 760Mm. The Side Unit Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Top And Side 36Mm Thick, Drawer Base 9Mm And Other Parts 18Mm Thick Like Shutter, Back, Facia, Panel Etc. It Shall Have 2 Drawer And 2 Shutter. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. A Fixed Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 675Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Drawer Base Shall Be 9Mm Thick And Other Parts Like Side, Back, Facia Shall Be 18Mm Thick. It Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Molding, Skirting Shall Be Provided At Bottom. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Executive Chair ( A Type ) Specifications: Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing High Back Chair. The Seat Shall Be Made Of 12Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Polyurethane Foam ( 25+19 ) Mm Thick Having Density ( 40+40 ) Kg / M³ With Beage Leatherette Tapestry 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Hot Pressed Plywood 12Mm Thick Upholstered With High Resilience Moulded Polyurethane Foam 40 Mm Thick Having Density 40 Kg / M³ With Beige Leatherette Tapestry 0.8 Mm Thick And 535 Gsm With Contoured Lumbar Support Which Helps To Provide Full Back Support And Maintain The Natural Curvature Of The Spine. Back Shall Be Movable Type With The Assistance Of Gas Lift Provided Under The Seat And Lever In The Arm. The Armrest Shall Be Used Cushion Arm With Leatherette Tapestry And Ss Shiny Chrome Finish Completely Joint With Seat And Back. The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Upto 65Mm With Gas-Lift To Suit Them Using The Lever Under The Seat.. The Pedestal Shall Be Made Up Of Ms Crca Chrome Plated Having Pitch Circle Dia 700 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self-Lubricating Property For Friction Free Movement. The Seat Size Shall Be 480±10 Mm ( D ) X 520±10 Mm ( W ) And Back Size Shall Be 520±10 Mm ( W ) X 710±10 Mm ( Ht ) From Seat. Overall Height Shall Be = 1190±10 Mm, Overall Depth = 750±10 Mm & Overall Width = 750±10 Mm. , Executive Table - Type B Specifications: Supplying & Placing Executive Table With Credenza Unit And Pedestal Unit In Completely Knock Down Conditions With An Overall Size 1800 -1900 Mm X 750 Mm X 750 Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Worktop Shall Have The Size 1800-1900 Mm X 800Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Enclosed With Wire Manager Cap For Electric Provision. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 550Mm X 300Mm. The Trey Shall Be Operated On Sliding Channel. The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Credenza Unit For Storage Purpose With An Overall Size 900 Mm X 450Mm X 650Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Base 9Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Facia, Side Panel Etc. It Shall Have 2 Box Drawer, 1 Filing Drawer And 1 Shutter. It Should Be Operated With The Assistance Of Ss Handle, Concealed Crank Hinge And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. It Shall Be Mounted On Injection Moulded Nylon Castor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 650Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. The Pedestal Shall Be Mounted Over Injection Moulded Nylon Castor. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Executive Chair ( B Type ) Specifications: Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam ( 40+40 ) Mm Thick Having Density ( 40 & 32 ) Kg / M³ In Seat And ( 30+30 ) Mm Thick Having Density ( 32, 32 ) Kg / M³ In Back. The Same Shall Be Upholstered With Fabric. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Arm With Cushion Base Leatherette Covering Top. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm Gas-Lift To Suit Them Using The Lever Under The Seat. The Pedestal Should Have Five Legged Ms Crca Powder Coated With 50-60? Dft Thick Having Pitch Circle Dia. 660 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm ( D ) X 520±10 Mm ( W ) And Back Size Shall Be 520±10 Mm ( W ) X 700±10 Mm ( H ) From Seat. Overall Height Shall Be = 1160±10 Mm, Overall Depth = 680±10 Mm & Overall Width = 660±10 Mm. , Executive Table - Type C Specifications: Supplying & Placing Executive Table With Credenza Unit And Pedestal Unit In Completely Knock Down Conditions With An Overall Size 1800-1900 Mm X 2000 Mm X 750 Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Worktop Shall Have The Size 1800Mm X 800Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Enclosed With Wire Manager Cap For Electric Provision. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 550Mm X 300Mm. The Trey Shall Be Operated On Sliding Channel. The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Credenza Unit For Storage Purpose With An Overall Size 1200Mm X 450Mm X 650Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Base 9Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Facia, Side Panel Etc. It Shall Have 2 Box Drawer, 1 Filing Drawer And 1 Shutter. It Should Be Operated With The Assistance Of Ss Handle, Concealed Crank Hinge And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. It Shall Be Mounted On Injection Moulded Nylon Castor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 650Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. The Pedestal Shall Be Mounted Over Injection Moulded Nylon Castor. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380 , Executive Chair ( C Type ) Specifications: Providing And Supplying A Mid Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam ( 40+40 ) Mm Thick Having Density ( 40 & 32 ) Kg / M³ In Seat And ( 30+30 ) Mm Thick Having Density ( 32, 32 ) Kg / M³ In Back. The Same Shall Be Upholstered With Fabric The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Arm With Cushion Base Leatherette Covering Top. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm Gas-Lift To Suit Them Using The Lever Under The Seat. The Pedestal Should Have Five Legged Ms Crca Powder Coated With 50-60? Dft Thick Having Pitch Circle Dia. 660 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm ( D ) X 520±10 Mm ( W ) And Back Size Shall Be 520±10 Mm ( W ) X 700±10 Mm ( H ) From Seat. Overall Height Shall Be = 1160±10 Mm, Overall Depth = 680±10 Mm & Overall Width = 660±10 Mm. , Visitor Chair ( A ) Specifications Providing And Supplying A Visitor Chair With Ergonomic Design For User Comfort & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam ( 40+40 ) Mm Thick Having Density ( 40, 32 ) Kg / M³ In Seat And ( 30+30 ) Mm Thick Having Density ( 32, 32 ) Kg / M³ In Back. The Same Shall Be Upholstered With Leatherette Tapestry 1 Mm Thick And 571 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Back Support. The Chair Shall Be Supplied With Polypropylene Arm With Cushion Base Fabric Covering Top. The Frame Structure Shall Be Cantilever Support Type Made Of Crca Powder Coated 50-60? Thick Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10 Mm ( D ) X 520±10 Mm ( W ) And Back Size Shall Be 520±10 Mm ( W ) X 625±10 Mm ( H ) From Seat. Overall Height Shall Be = 1040±10 Mm, Overall Depth = 680±10 Mm & Overall Width = 660±10 Mm. , Three Seater Sofa Specifications: Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Marine Grade As Per Is: 710 Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ In Seat And 32Kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³. The Structure Shall Be Upholstered With Fabric Dual Tone. The Understructure Shall Consist Of Ss 304 Grade Legs Having Cross-Section Area 40 Mm X 20 Mm X 1.6 Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 550±10 Mm ( D ) X 1650±10 Mm ( W ) , Seat Height = 450±10 Mm, Overall Width = 2320±10 Mm, Overall Depth = 900±10 Mm & Overall Height = 820±10 Mm. , Two Seater Sofa ( Reg ) Specifications: Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ In Seat And 32Kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³. The Structure Shall Be Upholstered With Fabric Dual Tone. The Understructure Shall Consist Of Ss 304 Grade Legs Having Cross-Section Area 40 Mm X 20 Mm X 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 550±10 Mm ( D ) X 550±10 Mm ( W ) , Seat Height = 450±10 Mm, Overall Width = 1120±10 Mm, Overall Depth = 900±10 Mm & Overall Height = 820±10 Mm. , One Seater Sofa ( Reg ) Specifications: Supplying And Placing Single Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ In Seat And 32Kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³. The Structure Shall Be Upholstered With Fabric Dual Tone. The Understructure Shall Consist Of Ss 304 Grade Legs Having Cross-Section Area 40 Mm X 20 Mm X 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 550±10 Mm ( D ) X 550±10 Mm ( W ) , Seat Height = 450±10 Mm, Overall Width = 1120±10 Mm, Overall Depth = 900±10 Mm & Overall Height = 820±10 Mm. , Centre Table ( A Type ) Specifications Supplying & Placing Center Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Profile Shall Be In Rectangle Shape With Bevelled Edges. The Bottom Storage Shelf Shall Be Provided With An Overall Size 1155Mm X 280Mm Made Of 8Mm Thick Toughened Glass With Bevelled Edges. The Glass Shall Be Supported On Vacuum Caps Situated Over Ss 304 Grade Pipe Frame. The Under Structure Shall Have Ss Pipe Frame Having Size 67Mm X 13.5Mm. There Shall Be Ppcp Shoe Provided To Avoid Scratches On The Floor. , Side Table ( A Type ) Specifications: Supplying & Placing Center Table With An Overall Size 600Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Profile Shall Be In Square Shape With Bevelled Edges. The Bottom Storage Shelf Shall Be Provided With An Overall Size 555Mm X 280Mm Made Of 8Mm Thick Toughened Glass With Bevelled Edges. The Glass Shall Be Supported On Vacuum Caps Situated Over Ss 304 Grade Pipe Frame. The Under Structure Shall Have Ss Pipe Frame Having Size 67Mm X 13.5Mm. There Shall Be Ppcp Shoe Provided To Avoid Scratches On The Floor. , Side Table ( B Type ) Specifications: Supplying & Placing Center Table With An Overall Size 600Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Up Of 18 Mm Ply And 1 Mm Thick Mica Laminated. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius And Should Have Matching Shade. The Profile Shall Be In Square Shape With Bevelled Edges. The Bottom Storage Shelf Shall Be Provided With An Overall Size 555Mm X 280Mm Made Of 8Mm Thick Toughened Glass With Bevelled Edges. The Glass Shall Be Supported On Vacuum Caps Situated Over Ss 304 Grade Pipe Frame. The Under Structure Shall Have Ss Pipe Frame Having Size 67Mm X 13.5Mm. There Shall Be Ppcp Shoe Provided To Avoid Scratches On The Floor. , Centre Table ( B Type ) Specifications: Supplying & Placing Center Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Up Of 18 Mm Ply And 1 Mm Thick Mica Laminated. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius And Should Have Matching Shade. The Profile Shall Be In Rectangle Shape With Round Corner. The Top Shall Be Supported On Ss 304 Grade Frame With Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Under Structure Shall Consist Of Four Legs Made Of Ss 304 Garade Oval Pipe Having Cross-Section Area 52Mm X 26Mm With 1.6Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Visitor Chair ( Type B ) Specifications: Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 45Kg / M³ In Seat And 45Mm Thick Having Density 35Kg / M³ In Back. The Same Shall Be Upholstered With Fabric Tapestry 1Mm Thick And 300 Gsm. The Back And Base Of Chair Shall Be Supplied With Polypropylene / Abs Moulded Cover And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine. The Seat And Back Shall Be Arrested Together With 50-60? Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Black Integral Polyurethane Arm With Metal Insert Completely Joint With Seat And Back. The Frame Structure Shall Be Cantilever Support Type Made Up Of Crca Powder Coated With 50-60? ( Dft ) Thick Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 480±10 Mm ( W ) X 450±10 Mm ( D ) And Back Size Shall Be 480±10 Mm ( W ) X 400±10 Mm ( H ) From Seat & Overall Height = 820±10 Mm. , Study Table Specifications: Supplying And Placing Table In Knock Down Condition With An Overall Size 1200Mm X 600Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Understructure Shall Be Supplied With Crca Round Pipe Having Dia. 25.4Mm With 1.6Mm Thick. 1 Nos. Footstep Shall Be Provided Between Both Side Leg With The Same Size I.E Dia. 25.4Mm With 1.6Mm Thick. Fixed Pedestal Metallic Unit Shall Be Supplied With 3 Nos. Of Drawer At One Side. All The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Recessed Handle. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. , Study Chair Specifications Providing And Supplying Chair The Seat Shall Be Made Of 12Mm Thick Hot Pressed Plywood Upholstered With High Resilience Polyurethane Foam ( 50+19 ) Mm Thick Having Density 40Kg / M³ And The Back Shall Be Made Of Pipe Frame Upholstered With High Resilience Polyurethane Foam ( 19+19 ) Mm Thick Having Density 23Kg / M³. The Same Shall Be Upholstered With Fabric. The Armrest Shall Be Used Cushion Arm Mounted On Pipe Frame. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ss 304 Grade Chrome Finish Round Pipe Of Dia 25.4Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 480±10 Mm ( D ) X 510±10 Mm ( W ) And Back Size Shall Be 510±10 Mm ( W ) X 440±10 Mm ( H ) From Seat. Overall Height Shall Be = 870±10 Mm, Overall Depth = 660±10 Mm & Overall Width = 560±10 Mm. , Clerk Table Specifications: Supplying And Placing A Modular Table With An Overall Size 1200Mm X 600Mm X 750Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Understructure Shall Be Supplied With Crca Rectangle Pipe Having Cross-Section Area 40Mm X 20Mm. The Gable End Shall Be Given At One Side Made Up Of 0.8Mm Thick Perforated High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. Fixed Pedestal Unit With Powder Coated Metallic Body Shall Be Supplied With 3 Nos. Of Drawer I.E. 2 Box+1 Filing At One Side. All The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Abs Plastic Recessed Handle. The Manufacturer Shall Have Basic Quality And Safety Certifications Like Iso-9001:2015, Iso-14001: 2015, Iso-18001:2007. , Book Case Specifications: Providing And Supplying Metal Book Case With An Overall Size 915 Mm ( W ) X 320 Mm ( D ) X 1750Mm ( H ) . The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. Top, Back & Side Panels Shall Be Made Of 0.8Mm And Rest 1Mm High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure. , Library Rack Specifications: Providing, Supplying And Placing Double Side Steel Library Racks In Perfectly Upright And Straight Position. The Overall Size Of The Rack Shall Be 940Mm ( W ) X 600Mm ( D ) X 2110Mm ( H ) . The Rack Shall Be Supplied With 4 Nos. Of Adjustable Shelves On Both Side I.E. 10 Loading Levels. Rack, Side Panel, Skirting Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Side And Top Shall Be Covered With 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Edges Of The Board Shall Be Sealed With 2Mm Thick Pvc Edge Banding. The Add-On Units Can Be Stacked Width Wise To Form A Bank Of Racks Having Common Side Panel. The Shelves Shall Be Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 80Kg Maximum. Each Shelf Shall Be Provided With Stiffener At Bottom For Strength And Back Stiffener For Separator Between Front And Rear Shelf. All Steel Components Shall Be Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure. , Storage Rack Specifications: Providing, Placing And Installing A Slotted Angle Rack With An Overall Size 900Mm ( W ) X 400 Mm ( D ) X 1800Mm ( H ) . The Panel Shall Have 5 Nos. Of Shelves Made Up Of 1.2 Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Crca Slotted Angle Shall Be Supplied With 3 Mm Thick Having Size 40Mm X 40Mm. All Steel Components Shall Be 40-60? Thick ( Dft ) Powder Coated After 7 Tank Pre-Treatment Process Flow. Corner Plate ( Gussets ) And Fasteners Shall Be Provided For Complete Assembly. , Computer Table Specifications: Supplying & Placing Computer Desk With An Overall Size 1500Mm ( W ) X 750Mm ( D ) X 750Mm ( H ) . It Should Have Work Top Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Board Shall Be Supported On Fixed Pedestal At One End And Fixed Cpu Unit At Another End. The Desk Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Desk. The Modesty Panel Shall Have The Size 690Mm X 600Mm With 18Mm Thick Pre-Laminated Particle Board Connected With Both End. 18Mm Thick Pre-Laminated Board Base Keyboard Tray Shall Be Provided With An Overall Size 684Mm X 350Mm. The Keyboard Trey Shall Be Operated By Sliding Channel To Enable Smooth Operation. A Fixed Pedestal Shall Be Provided With The Size 400Mm X 620Mm X 725Mm At One End With 3 Drawer Operated On Roller Channel And 1 Filing Drawer Operated On Ball Bearing Channel. All Drawer Shall Be Operated With Ss Handle With Multi-Purpose ( Mp ) Locking Mechanism. Other Side Of Table Open Type Storage Shall Be Provided With The Size 400Mm X 600Mm X 725Mm Having One Adjustable Shelf To Accumulate Cpu. Complete Understructure Made In 18Mm Thick Pre-Laminated Particle Board With Appropriate Edge Banding And Drawer Base Shall Be 9Mm Thick. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding Skirting Shall Be Provided At Bottom Of The Pedestal At Both Sides. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007. , Three Seater Visitor Bench Specifications: Supply And Installation Of Bench 3 Seater For Waiting Room: Cross Beam Shall Be Made Up Of Black Powder Coated Rectangular M.S.Erw Tube Having 8 ± 0.03 Cm X 4 ± 0.03 Cm X 0.2 ± 0.014 Cm Size. Leg And Armrest Shall Be Chrome Plated Made Of Cold Rolled Steelwith 0.12 ± 0.013 Cm Thinkness. Seat Back Shell Shall Be 1.6 Mm Thk Powder-Coated Perforated Shell Made From Cold Rolled M.S. Sheet 0.14 ± 0.013 Em Thickness. Theside Bar Shall Be Made Of Chrome Plated Solid Steel 3 ± 0.03 Cm X 1.2 ± 0.3 Cm ( Din174 ) With Fluting And Plastic Inserts.The Shell Shall Be Assembledon The Cross Beam With Help Of M8 Bolts ( Per Seat- 8 Nos. Seat To Bracket And 4Nos. Bracket To Cross Beam ) . The Seat & Back Cushion Shall Be Made Up Of Pu Foam Upholstered With Leather Cloth Or Fabric With Plywood. Overall Dimensions Shall Be Seat Height - 40.0Cm, Height - 67.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-163.0Cm And Depth-57.0 Cm. , Student Desk Cum Bench Specifications: The Class Room Desk Consists Of Front Desk, Middle Row Comprising Of Seat For Front Desk, Back Supported & Jointed With It The Desk Behind For Another Seat, Back & Another Desk For The Person Sitting Behind And So On Till The Last Row Which Shall Consist Of Seat Only, Provided With Back Support. Thus The Desking System Shall Consist Of One Row Of Front Desk, Several Rows Of Middle Seat & Back Desk & Again One Last Row Of Back Seat. A. Front Desk: Top Size: 1200Mm X 375Mm X 18Mm Thick For Two Seater Desk. ( 36 Nos. ) Top Size: 1800Mm X 375Mm X 18Mm Thick For Three Seater Desk. ( 180 Nos. ) Made Of 18Mm Thick Commercial Plywood On Top, Front And Rear Edges. 800Mm High In Front And 750Mm Inside Shall Be Fixed To The Main Frame With Steel Inserts And Galvanized Bolts. All Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue. All The Exposed Edges Shall Be Made 36 Mm ( 18+18Mm ) And 1 Mm Thick Laminate On Top, Front And Rear. Below The Top Is Provided A Storage Shelf For The Students To Keep Their Bags, Books Etc. The Vertical Leg Supporting The Storage Shelf Below The Working Top Must Provide Enough Leg Room For Ease In Moving In & Out Of Desk. Also, There Should Be No Sharp Edges Of The Side Supports To Prevent Hurting While Moving In & Out. The Front Of The Desk Should Be Cladded With 18Mm Thick Commercial Plywood Plus 1 Mm Laminate, Held Inside The Front Frame With Edges Within The Frame To Provide Protection To The Board On Edges.Underside Of The Table Shall Be Finished With 0.6 Mm Thick Laminate Of White Colour. B. Middle Seat & Desk: Shall Consist Of Seat, Back & Writing Shelf Behind And Storage Shelf Below It. The Detail Specifications Will Be As Under: Seat Size: 1200Mm X 375Mm X 18Mm Thick For Two Seater Desk. Seat Size: 1800Mm X 375Mm X 18Mm Thick For Three Seater Desk. Made Up Of 18Mm Thick Commercial Plywood On Top, Front And Rear Edges Shall Be Fixed To The Main Frame With Steel Inserts And Galvanized Bolts. All Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue. All The Exposed Edges Shall Be Made 36 Mm ( 18+18Mm ) And 1 Mm Thick Laminate On Top, Front And Rear. Underside Of The Table Shall Be Finished With 0.6 Mm Thick Laminate Of White Colour. Back Size: 1200Mm X 375Mm X 18Mm Thick For Two Seater Desk. Back Size: 1800Mm X 375Mm X 18Mm Thick For Three Seater Desk. Made Up 18Mm Thick Commercial Plywood On Top, Front And Rear Edges ) Shall Be Fixed To The Main Frame With Steel Inserts And Galvanized Bolts. All Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue. All The Exposed Edges Shall Be Made 36 Mm ( 18+18Mm ) And 1 Mm Thick Laminate On Top, Front And Rear. Underside Of The Table Shall Be Finished With 0.6 Mm Thick Laminate Of White Colour. Writing Shelf: 1200Mm X 375Mm X 18Mm Thick For Two Seater Desk. Writing Shelf Size: 1800Mm X 375Mm X 18Mm Thick For Three Seater Desk. Shall Be Made Of 18Mm Thick Commercial Plywood On Top, Front And Rear Edges 36Mm Below The Top Edge Of The Back To Prevent Interference With Student Sitting On The Front Seat. C. Last Row: ( Back Row ) The Last Row Consists Of Seat & Back Only Mounted On 50 X 25 X 1.6Mm Thick Crca Pipe Frame. Back Row Size: 1200Mm X 375Mm X 25M Thick For Two Seater Desk. Back Row Size: 1800Mm X 375Mm X 18Mm Thick For Three Seater Desk. Made Up Of 18Mm Thick Commercial Plywood On Top, Front And Rear Edges Shall Be Fixed To The Main Frame With Steel Inserts And Galvanized Bolts. All Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue. All The Exposed Edges Shall Be Made 36 Mm ( 18+18Mm ) And 1 Mm Thick Laminate On Top, Front And Rear. Underside Of The Table Shall Be Finished With 0.6 Mm Thick Laminate Of White Colour. The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Particle 17Mm Thick. The Seat, Back & Writing Desk Shall Be 25Mm Thick Particle, Laminated On Both Sides, Top Laminate & Balancing Laminate On Back As Mentioned Above. All The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Epoxy Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. Note: 1. Crca Steel Pipes Shall Be Of Tata / Jindal Make. 2. All Pre-Laminated Particle Boards Shall Be Of Action Tesa / Marino / Godrej Make. Two Seater , Three Seater , Big Almirah Specifications: Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm ( W ) X 485Mm ( D ) X 1980Mm ( H ) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. Door Shall Be Made Of 1Mm Thick And All Other Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. , Supply And Installation Of Recta Workstations - 900W X 600D Providing And Placing Tile Based Modular Workstation, With Partitionthickness As 50-60 Mm And Ht -1200 Including Powder Coated Aluminium Trims.Tiles On Main Spine: Combination Of Top Tiles Are Plb / Fabric Tackable / Whiteboard Tile. Bottom Tiles - Plain Metal. Fin: 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 2X9 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Block And Top Block. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Decorative Laminate / White Board. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finish. ( Decorative Laminate ) Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. The Partition Has Two Integrated Raceway Provided One At Skirting Level And Another At The Work Surface Level Thus Ensuring Separation Of Power And Networking Cables. Necessary Cut Outs For Switches As Per Site Requirement Will Be Provided. Cost Of Switches And Wires Not To Be Considered In Furniture. It Will Be Supplied By Department Separately. Side Panels Or Legs - Made Of 25 Mm Thick Pre-Laminated Particle Board With Flat Pvc Lipping Edge Binding Tape Considered Only On The Open End Conditions Or Metal Powder Coated Legs At The End And Shared Condition. Pvc Edge Binding Tape Should Be From Rehau Or Dolken Of Germany. System Shall Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Work Surface - Made Of 25 Mm Thick Pre-Laminated Particle Board Confirming To Is:12823 Interior Grade With Post Forming On Front Only Of Size 900 Mm W X 600 Mm D. Note: All Partitions And Side Panels Have Leveling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 20 Mm Of Uneven Flooring.Raceway:-The Raceways Are Made Out Of 0.8Mm Thick Crca & Powder Coated. The Electrical Raceway Can Be Provided Below Worktop Or Above Worktop, These Are Hook On Type Which Will Be Mounted On The Verticals. The Skirting / Data Raceway Is Hollow And Will Be Mounted On The Raceway Channels Cpu Trolley Fixed Type:Cpu Trolley: The Metal Tray Is Made Of 1.0 Mm Thick Crca Sheet And Side Support Is Made Of 0.8 Mm Thick Crca Sheet. On Wall Side ( With Common Side Partition Sharing ) , Back To Back ( With Common Side Partition As Well As Common Central ) , Chairs For Lab-Clerk-Computer Without Arm Revolving: Specifications: Providing, Supply And Placing The Seat And Back Is Made Up Of 12Mm Thick ( 7 Layers ) Hot Pressed Plywood / Pvc Frame Moulded In Polyurethane Foam Of Density 45±2Kg / M3. The Dimensions Of Seat Shall Be Minimum 45.0Cm ( W ) X 42.0Cm. ( D ) And Of Back Shall Be 40.0Cm ( W ) X 47.0Cm. ( H ) . The Seat And Back Covers Shall Be Injection Moulded In Black Co-Polymer Polypropylene. The Back Ply And Foam Is Designed With Contoured Lumber Support For Achieving Comfortable Seating Posture. The Hr Polyurethane Foam Shall Be Moulded With Density.=45±2.Kg / M3and Hardness Load 16±2 Kgf As Per Is:7888.For 25% Compression. The Permanent Contact Mechanism Shall Be Designed With 360° Revolving Type, 14±2°Maximum Back Tilt Only, Upright Position Locking, Tilt Tension Adjustment. The Pneumatic Height Adjustment Shall Has An Adjustment Stroke Of 11.0 ±0.3Cm. The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Injection Moulded In Black 30% Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 62.0 ±0.5Cm. Pitch-Centre Dia. ( 72.0 ±1.0Cm With Castors ) . The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 43.0 To Max 54.0Cm, Height - Min87.5 To Max 98.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-71.0 Cm And Depth-71.0 Cm. Gas Lift: Gas Lift Pipe Diameter 50Mm And Has An Height Adjustment Stoke Of 110Mm. , Supply And Installation Of Line Programmer Computer Labs Specifications: Table 1500W X 750D X 750H Providing And Placing Table 1500W X 750D X 750H Desk Based Modular Workstation With System Ht - 750Mm. Understructure: Made Of Erw Pipe 50 X 50 X 1.6Mm Thick Duly Powder Coated With 50-60 Micron. Comprising Of Metal Powder Coated L Connectors Between Legs, Legs Made Up Of Metal Powder Coated Finish And The Entire Assemply Is Fixed To The Worktop With The Help Of Abs Plastic Spacers 20 Mm High Which Gives The Floating Look To The W / S Module. Wire Management : Metal Powder Coated Cable Pole Of Size 170Mm W X 85 Mm D X 705 Mm Ht Is Given To Pull Wires From The Floor Junction Box Upto The Power Box Fixed Under Neath The Worktop. Aluminium Access Flaps On Worktop Above Power Box Cut Out For Accessing Switches. To Carry Wires Forward Through W / S Mesh Type Wire Carrier Assembly Is Provided Below Worktops. Modesty Panels - 25 Mm Thk Plb Modesty X 450 Mm Wide. Work Surface -Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500W X 750D X 750H
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Haryana View Result →
45.
Law and Justice #10436712 Price Bid
Supply Of Ground Water Lifting System Through Solar Submersible Pump With Boring 100Mm X 50Mm Tube Well And Water Tank Over Iron Structure For Drinking Water At Basgirir Dham A.P. Primary School At Under Putimari-I G.P,W.C.No. 47576674, Near The H/O Supply Of Ground Water Lifting System Through Solar Submersible Pump With Boring 100Mm X 50Mm Tube Well And Water Tank Over Iron Structure For Drinking Water At Basgirir Dham A.P. Primary School At Under Putimari-I G.P,W.C.No. 47576674, Near The H/O , Earth In Excavaiton Of Foudation Trenches Or Drains In All Sorts Of Soiol Includig Removing Spreading Or Stacking The Spoils Within Al Lead Of 75M As Directed. The Item Include Necessary Trimming The Sides Of Tenches Leveling, Dressing And Ramming The Bot , Earth Workin Filling In Fundatin Trancesh Or Plinth With Good Earth In Layers Not Exceeding 15Cm Including Watering Ramming Etc, Layer By Layer Complete. , Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level And Filling Joints With Local Sand , Cement Concrete With 30 Mm Down Graded Shingles Excluding Shuttering N.N,. Variety 1:3:6 Proportion In Ground Floor , Cement Concrete Of Mix (1:1.5:3) M-20 With 20 Mm Down Well Graded Stone Chips Excluding Shuttering And Reinforcement , Hirre And Labour Charges For Shuttering With Centering And Cessary Staging Upto 4 M Using Appproved Stout Props And Thick Hard Wood, Planks Of Approved Thickness With Required Bracing For Concrete Slabs, Beams And Columns Lintels Curved Or Straight Includ , Reinforcement For Reinorced Concrete Work In All Sorts Of Structures Including Distribution Bars, Stirrups Binders Etc Intial Straightening And Removal Of Loose Rust (If Necessary), Cutting To Requisite Length, Hooking And Bending To Correct Shape, Placin , Neat Cemtn Punning Sbout 1.5Mm Thick In Wall Dado Windowsil Floot Etc , Labour For Boring Tube Well Of Required Dia By Water Jet System Through Any Type Of Soil Straita Including Hire And Labour Charges For Boring Pipesl Saffolding, Tools And Plants As Neessary And Taking Out Them And Lowering Pipes Strainers Blind Pipe Etc, And Fitting And Fixing The Same Complete Inclujding Bucket Washing And Other 50 Mm Dia Boring Etc. , 100 Mm Dia Boring Etc , Supply Of Pvc Pipes & Fitttings Scheddule 80 (Medium Duty) Conforming To Astmd-1785 And Threaded To Match With Gi Pipes As Per Is 1239 50 Mm Dia , 100 Mm Dia Boring Etc , Supplying Pvc Strainer Of Approved Make With Adapter Conforming To I.S.I, 2818 Specifications 50 Mm Dia , Supplying Fitting An Fixing Steel Cutter Piece Upto 450 Mm Long With Sockets , Supply Of Long Screw Of Tata Make With Sockets And Jamunt 40 Mm , Supply Of Pvc Water Storage Tank Of Approved Quality With Closed Top With I Multilater , Supplying Fitting And Fixing Heavy Type Bell Mouth Reducing Socket 50 Mmx 100M , Supplying Fitting And Fixing Chek Valve Horixontal G.M. Tested To 21 Kg Per Sa.Cm , Supplying Fitting Anf Fixing Plug Of Approvedd Make Conforming To I.S. Specification , Suppoying Fitting And Fixing 300 Ms Houseng Clamp Of Approved Quality , Structural Works In Columns Beams Etc, With Simple Rolled Structural Members Connected To One Another With Backet Gussets Cens As Per Design Direction Of Engineer In Charge Dcomplete Ioncluding …. Required For The Work Including All Icident Changes Such As Electricity Charges Labour Insurances Charges ... , Supplying Fitting An Fixing Cpvc Pipes Of Approved Make Conforming With All Necessary Accessories Apecials Socket Bend Tee Union Cross Elbo Nipple Longscew Reducing Socket Reducing Tee Short Pipece Etd Ciffted With Hoolder Bats Clamps Includung Cutting Pipes Fitting Fgixing Complete In All Respect , Supplying Fitting And Fixing Alloy Iron With Brass Spindle Bib Cock Stopcock Of Approved Brand And Make Spray Painted And Tested To 21 Kg Per Sqm , Printing One Coat Of Timber Or Plastered Or Steel Surface, Wth Ready Mixed Primer Of Approved Quality Including Smoothing Sufrace Bu Sand Papering , Painting With Best Quailty Synthetic Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc, Cincluding Using Of Approved Putty Aets On The Surfrace If Necessary , Supplying Fixing Commissionin And Testing Solar Voltac Module On Exsting Iron Frame Structure Eath 156 Mm Monocrystaling Silicon Solar Cells Laminated Between Shet Of Ethling Vinyl Acilate And High Transmissivity 3 M Tepered Glass Confirming To Spedificationsor Equvanet And National Of Intenationa Standards The Power Output Of The Module Under Should Be A Miimum , Supplying Fixing Commissioning An Rtesting Pump Controler Unit Consisting With Pcu Switching Element S Mosfet Type Of Changer Pwm With Mppt Technology Input From Single Phase With Protection Short Circuit Deep Dischagrge Inoput Surge Voltage Over Current Battery Reverse Solar Array Reverse , Supply Anf Fixing Round 2-Core 4 Sqm Mim Pvc Multi Core Fr Wire For Array Connecting , Supply Anf Fixing Mc4 Connector For Panel Loop , Earrthing With Mm Dia G.I. Pipe Protection To Be Filed With Bitumen Partly Nder The Ground Level And Partly Above Groud Level Driven To An Average Depth Below The Grud Level & Resoring The Surface Duly Rammed , Connecting The All Equipemnt To Tearth Busbar Including Gi Wire Of Size As Below On Wall Floor As Required And Making Connecting To Euipment With Olts, Nuts, Washers Cable Lugs As Required And Mending Goo Damages , Providing And Fixing Conductor Made 25Mm Dia 300 Mm Lng Copper Tube Having Single Prong At Top With 85 Mm Dia 3 Mm Thick Copper Base Plate Includig Holes Complete Ad Required , Supply Installation Testing & Lowering Of 2.0 Oil Solar Submerible Pump Motor Set Complet Having Suritable Discharge A Per Yield Test Of Well Submeribkle Cab,E Bar Char And Necessary Control Panesl And Strater As Per Manufacurer Specifivation , 12% Gst , Welface Cess 1%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
46.
Law and Justice #10436710 Price Bid
Supply Of Ground Water Lifting System Through Solar Submersible Pump With Boring 100Mm X 50Mm Tube Well And Water Tank Over Iron Structure For Drinking Water At Umakanta 5Th Plan Pry. School Under Bhutkura Mouza At Matalhat G.P, Work Code No. 4757917 Supply Of Ground Water Lifting System Through Solar Submersible Pump With Boring 100Mm X 50Mm Tube Well And Water Tank Over Iron Structure For Drinking Water At Umakanta 5Th Plan Pry. School Under Bhutkura Mouza At Matalhat G.P, Work Code No. 4757917 , Earth In Excavaiton Of Foudation Trenches Or Drains In All Sorts Of Soiol Includig Removing Spreading Or Stacking The Spoils Within Al Lead Of 75M As Directed. The Item Include Necessary Trimming The Sides Of Tenches Leveling, Dressing And Ramming The Bot , Earth Workin Filling In Fundatin Trancesh Or Plinth With Good Earth In Layers Not Exceeding 15Cm Including Watering Ramming Etc, Layer By Layer Complete. , Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level And Filling Joints With Local Sand , Cement Concrete With 30 Mm Down Graded Shingles Excluding Shuttering N.N, . Variety 1:3:6 Proportion In Ground Floor , Cement Concrete Of Mix ( 1:1.5:3 ) M-20 With 20 Mm Down Well Graded Stone Chips Excluding Shuttering And Reinforcement , Hirre And Labour Charges For Shuttering With Centering And Cessary Staging Upto 4 M Using Appproved Stout Props And Thick Hard Wood, Planks Of Approved Thickness With Required Bracing For Concrete Slabs, Beams And Columns Lintels Curved Or Straight Includ , Reinforcement For Reinorced Concrete Work In All Sorts Of Structures Including Distribution Bars, Stirrups Binders Etc Intial Straightening And Removal Of Loose Rust ( If Necessary ) , Cutting To Requisite Length, Hooking And Bending To Correct Shape, Placin , Neat Cemtn Punning Sbout 1.5Mm Thick In Wall Dado Windowsil Floot Etc , Labour For Boring Tube Well Of Required Dia By Water Jet System Through Any Type Of Soil Straita Including Hire And Labour Charges For Boring Pipesl Saffolding, Tools And Plants As Neessary And Taking Out Them And Lowering Pipes Strainers Blind Pipe Etc, And Fitting And Fixing The Same Complete Inclujding Bucket Washing And Other 50 Mm Dia Boring Etc. , 100 Mm Dia Boring Etc , Supply Of Pvc Pipes & Fitttings Scheddule 80 ( Medium Duty ) Conforming To Astmd-1785 And Threaded To Match With Gi Pipes As Per Is 1239 50 Mm Dia , 100 Mm Dia Boring Etc , Supplying Pvc Strainer Of Approved Make With Adapter Conforming To I.S.I, 2818 Specifications 50 Mm Dia , Supplying Fitting An Fixing Steel Cutter Piece Upto 450 Mm Long With Sockets , Supply Of Long Screw Of Tata Make With Sockets And Jamunt 40 Mm , Supply Of Pvc Water Storage Tank Of Approved Quality With Closed Top With I Multilater , Supplying Fitting And Fixing Heavy Type Bell Mouth Reducing Socket 50 Mmx 100M , Supplying Fitting And Fixing Chek Valve Horixontal G.M. Tested To 21 Kg Per Sa.Cm , Supplying Fitting Anf Fixing Plug Of Approvedd Make Conforming To I.S. Specification , Suppoying Fitting And Fixing 300 Ms Houseng Clamp Of Approved Quality , Structural Works In Columns Beams Etc, With Simple Rolled Structural Members Connected To One Another With Backet Gussets Cens As Per Design Direction Of Engineer In Charge Dcomplete Ioncluding …. Required For The Work Including All Icident Changes Such As Electricity Charges Labour Insurances Charges ... , Supplying Fitting An Fixing Cpvc Pipes Of Approved Make Conforming With All Necessary Accessories Apecials Socket Bend Tee Union Cross Elbo Nipple Longscew Reducing Socket Reducing Tee Short Pipece Etd Ciffted With Hoolder Bats Clamps Includung Cutting Pipes Fitting Fgixing Complete In All Respect , Supplying Fitting And Fixing Alloy Iron With Brass Spindle Bib Cock Stopcock Of Approved Brand And Make Spray Painted And Tested To 21 Kg Per Sqm , Printing One Coat Of Timber Or Plastered Or Steel Surface, Wth Ready Mixed Primer Of Approved Quality Including Smoothing Sufrace Bu Sand Papering , Painting With Best Quailty Synthetic Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc, Cincluding Using Of Approved Putty Aets On The Surfrace If Necessary , Supplying Fixing Commissionin And Testing Solar Voltac Module On Exsting Iron Frame Structure Eath 156 Mm Monocrystaling Silicon Solar Cells Laminated Between Shet Of Ethling Vinyl Acilate And High Transmissivity 3 M Tepered Glass Confirming To Spedificationsor Equvanet And National Of Intenationa Standards The Power Output Of The Module Under Should Be A Miimum , Supplying Fixing Commissioning An Rtesting Pump Controler Unit Consisting With Pcu Switching Element S Mosfet Type Of Changer Pwm With Mppt Technology Input From Single Phase With Protection Short Circuit Deep Dischagrge Inoput Surge Voltage Over Current Battery Reverse Solar Array Reverse , Supply Anf Fixing Round 2-Core 4 Sqm Mim Pvc Multi Core Fr Wire For Array Connecting , Supply Anf Fixing Mc4 Connector For Panel Loop , Earrthing With Mm Dia G.I. Pipe Protection To Be Filed With Bitumen Partly Nder The Ground Level And Partly Above Groud Level Driven To An Average Depth Below The Grud Level & Resoring The Surface Duly Rammed , Connecting The All Equipemnt To Tearth Busbar Including Gi Wire Of Size As Below On Wall Floor As Required And Making Connecting To Euipment With Olts, Nuts, Washers Cable Lugs As Required And Mending Goo Damages , Providing And Fixing Conductor Made 25Mm Dia 300 Mm Lng Copper Tube Having Single Prong At Top With 85 Mm Dia 3 Mm Thick Copper Base Plate Includig Holes Complete Ad Required , Supply Installation Testing & Lowering Of 2.0 Oil Solar Submerible Pump Motor Set Complet Having Suritable Discharge A Per Yield Test Of Well Submeribkle Cab, E Bar Char And Necessary Control Panesl And Strater As Per Manufacurer Specifivation , 12% Gst , Welface Cess 1%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
47.
Law and Justice #10436708 Price Bid
Supply Of Ground Water Lifting System Through Solar Submersible Pump With Boring 100Mm X 50Mm Tube Well And Water Tank Over Iron Structure For Drinking Water At Kharija Batrigach Tapu 5Th Plan Pry. School At Barasoulmari G.P. Work Code No. 47580755, Supply Of Ground Water Lifting System Through Solar Submersible Pump With Boring 100Mm X 50Mm Tube Well And Water Tank Over Iron Structure For Drinking Water At Kharija Batrigach Tapu 5Th Plan Pry. School At Barasoulmari G.P. Work Code No. 47580755, , Earth In Excavaiton Of Foudation Trenches Or Drains In All Sorts Of Soiol Includig Removing Spreading Or Stacking The Spoils Within Al Lead Of 75M As Directed. The Item Include Necessary Trimming The Sides Of Tenches Leveling, Dressing And Ramming The Bot , Earth Workin Filling In Fundatin Trancesh Or Plinth With Good Earth In Layers Not Exceeding 15Cm Including Watering Ramming Etc, Layer By Layer Complete. , Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level And Filling Joints With Local Sand , Cement Concrete With 30 Mm Down Graded Shingles Excluding Shuttering N.N, . Variety 1:3:6 Proportion In Ground Floor , Cement Concrete Of Mix ( 1:1.5:3 ) M-20 With 20 Mm Down Well Graded Stone Chips Excluding Shuttering And Reinforcement , Hirre And Labour Charges For Shuttering With Centering And Cessary Staging Upto 4 M Using Appproved Stout Props And Thick Hard Wood, Planks Of Approved Thickness With Required Bracing For Concrete Slabs, Beams And Columns Lintels Curved Or Straight Includ , Reinforcement For Reinorced Concrete Work In All Sorts Of Structures Including Distribution Bars, Stirrups Binders Etc Intial Straightening And Removal Of Loose Rust ( If Necessary ) , Cutting To Requisite Length, Hooking And Bending To Correct Shape, Placin , Neat Cemtn Punning Sbout 1.5Mm Thick In Wall Dado Windowsil Floot Etc , Labour For Boring Tube Well Of Required Dia By Water Jet System Through Any Type Of Soil Straita Including Hire And Labour Charges For Boring Pipesl Saffolding, Tools And Plants As Neessary And Taking Out Them And Lowering Pipes Strainers Blind Pipe Etc, And Fitting And Fixing The Same Complete Inclujding Bucket Washing And Other 50 Mm Dia Boring Etc. , 100 Mm Dia Boring Etc , Supply Of Pvc Pipes & Fitttings Scheddule 80 ( Medium Duty ) Conforming To Astmd-1785 And Threaded To Match With Gi Pipes As Per Is 1239 50 Mm Dia , 100 Mm Dia Boring Etc , Supplying Pvc Strainer Of Approved Make With Adapter Conforming To I.S.I, 2818 Specifications 50 Mm Dia , Supplying Fitting An Fixing Steel Cutter Piece Upto 450 Mm Long With Sockets , Supply Of Long Screw Of Tata Make With Sockets And Jamunt 40 Mm , Supply Of Pvc Water Storage Tank Of Approved Quality With Closed Top With I Multilater , Supplying Fitting And Fixing Heavy Type Bell Mouth Reducing Socket 50 Mmx 100M , Supplying Fitting And Fixing Chek Valve Horixontal G.M. Tested To 21 Kg Per Sa.Cm , Supplying Fitting Anf Fixing Plug Of Approvedd Make Conforming To I.S. Specification , Suppoying Fitting And Fixing 300 Ms Houseng Clamp Of Approved Quality , Structural Works In Columns Beams Etc, With Simple Rolled Structural Members Connected To One Another With Backet Gussets Cens As Per Design Direction Of Engineer In Charge Dcomplete Ioncluding …. Required For The Work Including All Icident Changes Such As Electricity Charges Labour Insurances Charges ... , Supplying Fitting An Fixing Cpvc Pipes Of Approved Make Conforming With All Necessary Accessories Apecials Socket Bend Tee Union Cross Elbo Nipple Longscew Reducing Socket Reducing Tee Short Pipece Etd Ciffted With Hoolder Bats Clamps Includung Cutting Pipes Fitting Fgixing Complete In All Respect , Supplying Fitting And Fixing Alloy Iron With Brass Spindle Bib Cock Stopcock Of Approved Brand And Make Spray Painted And Tested To 21 Kg Per Sqm , Printing One Coat Of Timber Or Plastered Or Steel Surface, Wth Ready Mixed Primer Of Approved Quality Including Smoothing Sufrace Bu Sand Papering , Painting With Best Quailty Synthetic Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc, Cincluding Using Of Approved Putty Aets On The Surfrace If Necessary , Supplying Fixing Commissionin And Testing Solar Voltac Module On Exsting Iron Frame Structure Eath 156 Mm Monocrystaling Silicon Solar Cells Laminated Between Shet Of Ethling Vinyl Acilate And High Transmissivity 3 M Tepered Glass Confirming To Spedificationsor Equvanet And National Of Intenationa Standards The Power Output Of The Module Under Should Be A Miimum , Supplying Fixing Commissioning An Rtesting Pump Controler Unit Consisting With Pcu Switching Element S Mosfet Type Of Changer Pwm With Mppt Technology Input From Single Phase With Protection Short Circuit Deep Dischagrge Inoput Surge Voltage Over Current Battery Reverse Solar Array Reverse , Supply Anf Fixing Round 2-Core 4 Sqm Mim Pvc Multi Core Fr Wire For Array Connecting , Supply Anf Fixing Mc4 Connector For Panel Loop , Earrthing With Mm Dia G.I. Pipe Protection To Be Filed With Bitumen Partly Nder The Ground Level And Partly Above Groud Level Driven To An Average Depth Below The Grud Level & Resoring The Surface Duly Rammed , Connecting The All Equipemnt To Tearth Busbar Including Gi Wire Of Size As Below On Wall Floor As Required And Making Connecting To Euipment With Olts, Nuts, Washers Cable Lugs As Required And Mending Goo Damages , Providing And Fixing Conductor Made 25Mm Dia 300 Mm Lng Copper Tube Having Single Prong At Top With 85 Mm Dia 3 Mm Thick Copper Base Plate Includig Holes Complete Ad Required , Supply Installation Testing & Lowering Of 2.0 Oil Solar Submerible Pump Motor Set Complet Having Suritable Discharge A Per Yield Test Of Well Submeribkle Cab, E Bar Char And Necessary Control Panesl And Strater As Per Manufacurer Specifivation , 12% Gst , Welface Cess 1%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
West Bengal View Result →
48.
Housing Urban and Rular Development #10432377 AOC
Tender For Nh 566 Borim To Betoda Ponda Gram Panchayat Via Sirshirem, Deulwada(Length 6.82 Km) -- 1 SUB HEAD : PREPARATORY WORKS ,SITE CLEARANCE , DISMANTLING 2 Clearing and Grubbing Road Land ( By manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I 3 Box Cutting 4 Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. 5 Construction of embankment with approved materials deposited at site and obtained from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 6 Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 7 Construction of Subgrade and Earthen Shoulders 8 Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m & 100 m as per Technical Specification Clause 303.1. (Including Royality & Labour Cess). 9 SUB HEAD : PAVEMENT LAYERS - GSB & WBM ITEMS 10 Granular Sub-base with Well Graded 11 For Grading II Material 12 Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. 13 Water Bound Macadam with Stone Screening Type B Gr- III 14 WBM Grading 3 (Mechnical Means) 15 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. 16 SUB HEAD : BITUMINOUS ITEMS 17 Prime Coat (Low porosity) 18 Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 19 Tack Coat 20 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with Primer and clened with hydriloc broom as per technical specification aclouse 503.m 21 Bituminous Macadam 22 Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. 23 Bituminious Concrete 24 Providing and laying bituminious concrete with 40-60 TPH Drum Mix type Hhot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading, premixed with bituminious binder to mix with filler, transporting the hotmix to work site, with all leads laying with a hydrostatic/hydraulic paver finisher with sensor control to the required grade, level and alignment, using antistripping agent rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction complete as per MoRT&H Specifications Clause 509. 25 Side Drains( 100m channel drain) 26 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. 27 Sand Filling in Foundation :-- Sand Filling in Foundation Trenches as per drawing and technical specification Clause 1108 28 Providing R.C.C.M20 in foundation -do-do- all complete 29 Plain/reinforced cement concrete in substructure complete as per drawings and technical specification RCC M25 Grade @Drain cover 30 HYSD bars 31 Protection Works (cost of 85m Guard Wall) 32 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. 33 Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 34 Random Rubble Stone Masonry in 1:3 cement mortar for Foundation complete as per drawing & technical specification clauses 702, 704, 1202 and 1204 35 Providing Weepholes in brick masonary , Plain / Reinforced concrete abutement , wing wall , return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of 1V: 20H towards drawing 36 Plastering with cement mortar (1:4 ) on brick work in sub-structure as per Technical Specifications. 37 Plain/Reinforced cement concrete(M-20) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 38 SUB HEAD : ROAD FURNITURES , KM STONES , PMGSY LOGO, TRAFFIC & DIRECTION SIGN & ROAD SAFETY WORK 39 I)Kilometre stone 40 Reinforced cement concrete M15 grade kilometre local stone of standard design asper IRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 41 i) 5th km stone (Precast) 42 ii) Ordinary Kilometer Stone (Precast) 43 iii)iii) 200 m stone (Precast) 44 II)Providing and Fixing Logo of Project 45 Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1Providing and Fixing Logo of Project As per Drawing @ 5Nos.Citizen Information Board As per Drawing @2 Nos.Citizen Information Board As per Drawing @1 No. 46 Printing New Letters and Figures of any Shade 47 Printing new letter and figures of any shade ( letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade) 48 Boundary Pillar/Gaurd Post 49 Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704Qty vide Road Safety Chart 50 Traffic sign 51 Providing and fixing of retro reflective cautionary , mandatory and informatory sign board as per IRC :67 made of 1.5 mm thick MS steel duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural road of required shade and colour supported and welded on 47mmx47mmx12swg sheet tube firmly fixed to the ground by mean of properly designed foundation with M15 grade cement concrete 450x450x600 mm ,600mm below ground level as per approved drawing clause 1701.2.2. 52 ii) 600 mm equilateral & triangle 53 iii) 600 mm circular 54 v) 600 mm x 450 mm rectangular 55 vii) 900 mm side octagon, OR 56 f) 300mm x 900mm Rectangle - Hazard Marker Sign 57 g) 600mm x 500mm Rectangle - Chevron Sign 58 Road Markers/Road Stud with Lens Reflector 59 Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973 60 Metal Beam Crash Barrier Type - A, W : Metal Beam Crash Barrier 61 Providing and erecting a W metal beam crash barrier providing and erecting W Beam Crash barrier comprising of following three factory made unites-viz. 1) W Beam 2) Spacer Block 3) Vertical Post. The W beam 3mm thick cold roll formed guard rail raw material Conforming to IS-5986-2011 with minimum Grade 255 & with minimum yield stress of 255 Mpa which is fixed by bolted connection to spacer block C-channel of size 150mm* 75mm & 5mm thick, 33cm height spaced 2meter centre to centre, fixed to Vertical Post Cchannel of size 150mm*75mm&5mm thick cold roll formed section made from HR coils raw material conforming to IS-5986-2011 with minimum Grade 255 & with minimum yield stress of 255MPa, with 70cms free height above road or Ground level, and embedded to 110cms deep in cement concrete block of size 35cm*35*115cm or as directed by Engineer Incharge, assembled & fixed as per drawings of MORTH&H Circular No.RW/NH/33022/1/94-DO/III, dated 24/6/1994 & construction operation as per 811 or revevant MORT&H specifications for Roads & Bridge Works (latest edition). All fittings (bolts, nuts, fasteners, washers etc.) shall be conforming to IS:1367 & IS:1364 & galvanished by hot dip zinc coated process @0.55kg/m2 conforming to relevent IS specifications all etc. complete 62 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface 63 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. 64 At Both Edge 65 Overhead Signs (Providing and erecting overhead signs with a corrosion resistant aluminium alloy sheet as per IRC :67 2012 made of high intensity Grade sheeting using ASTM sheeting C type XI micro prismatic retro reflective material with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans)A 10 years warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor. 66 Truss and Vertical Support 67 Aluminium alloy plate for over head sign 68 CROSS DRAINANGE STRUCTURES 69 12.II RCC slab culvert( 1m Span-3 Nos,2m Span-3Nos, Two Span 3m Span RCC small bridge-2 Nos 70 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. 71 Sand Filling in Foundation Trenches as per drawing and technical specification Clause 1108. 72 Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Qty. below G.L. 73 Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. Qty above G.L. 74 Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204. ( M15 (PCC 1:2.5:5) 75 Plain/Reinforced cement concrete(M-20) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 76 RCC M25 in Deck Slab :-- Providing and laying reinforced cement concrete in superstructure (Deck slab M25) as per drawing and technical specifications Clauses 800, 1205.4, 1205.5 77 Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications 78 Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight 79 Providing Weepholes in brick masonary , Plain / Reinforced concrete abutement , wing wall , return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of 1V: 20H towards drawing. 80 Drainage spouts complete as per drawing and technical specifications Clause 1209 81 12) V Dismantling of Cross Drainage Works
Contract Date: Jun 30, 2026 Contract Value : ₹ 5.11 Crore
Government Departments No of Bidders 2
Goa View Result →
49.
Housing Urban and Rular Development #10432373 AOC
Tender For Sh 3 St. Marys To Sh 7 Via Betora, Nirankal (Length -11.80 Km) -- 1 Preparatory works, Site Clearance, Dismentalling 2 Clearing and Grubbing Road Land ( By manual means) including uprooting wild vegetation , grass ,bushs, shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I 3 EARTHWORK 4 Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m & 100 m as per Technical Specification Clause 303.1. (Including Royality & Labour Cess). 5 Tack Coat 6 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with Primer and cleaned with hydriloc broom as per technical specification clause 503. 7 Bituminous Macadam 8 Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. 9 Bituminous Concrete 10 Providing and laying bituminious concrete with 40-60 TPH Drum Mix type hot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading, premixed with bituminious binder to mix with filler, transporting the hotmix to work site, with all leads laying with a hydrostatic/hydraulic paver finisher with sensor control to the required grade, level and alignment, using antistripping agent rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction complete as per MoRT&H Specifications Clause 509. 11 Side Drains 12 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. 13 Sand Filling in Foundation :-- Sand Filling in Foundation Trenches as per drawing and technical specification Clause 1108 14 Providing R.C.C.M20 in foundation 15 Plain/reinforced cement concrete in substructure complete as per drawings and technical specification RCC M25 GradeDrain Cover 16 HYSD bars 17 Protection Works 18 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. 19 Providing PCC M-15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 20 Random Rubble Stone Masonry in 1:3 cement mortar for Foundation complete as per drawing & technical specification clauses 702, 704, 1202 and 1204 21 Providing Weepholes in brick masonary , Plain / Reinforced concrete abutement , wing wall , return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of 1V: 20H towards drawing. 22 Plastering with cement mortar (1:4 ) on brick work in sub-structure as per Technical Specifications 23 Plain/Reinforced cement concrete(M-20) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204. 24 ROAD FURNITURES , KM STONES , PMGSY LOGO, TRAFFIC & DIRECTION SIGN & ROAD SAFETY WORK 25 Kilometre stone Reinforced cement concrete M15 grade kilometre local stone of standard design asper IRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703. 26 i) 5th Km stone (Precast) 27 ii) Ordinary Kilometer Stone 28 iii) 200m stone (Precast) 29 (I)Providing and Fixing Logo of Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 30 Printing New Letters and Figures of any ShadeProviding and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 31 Boundary Pillar/Gaurd PostReinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704 32 Traffic SignProviding and fixing of retro reflective cautionary , mandatory and informatory sign board as per IRC :67 made of 1.5 mm thick MS steel duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural road of required shade and colour supported and welded on 47mmx47mmx12swg sheet tube firmly fixed to the ground by mean of properly designed foundation with M15 grade cement concrete 450x450x600 mm ,600mm below ground level as per approved drawing clause 1701.2.2. 33 II) 600mmequilateral & triangle 34 iii)600 mm circular 35 v)600 mm x 450 mm rectangular 36 vii) 900 mm side octagon, OR 37 f) 300mm x 900mm Rectangle - Hazard Marker Sign 38 g)600mm x 500mm Rectangle - Chevron Sign 39 Road Markers/Road Stud with Lens ReflectorProviding and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973. 40 Metal Beam Crash Barrier Type - A, W : Metal Beam Crash Barrier Beam Crash barrier comprising of following three factory made unites-viz. 1) W Beam 2) Spacer Block 3) Vertical Post. The W beam 3mm thick cold roll formed guard rail raw material Conforming to IS-5986-2011 with minimum Grade 255 & with minimum yield stress of 255 Mpa which is fixed by bolted connection to spacer block C-channel of size 150mm* 75mm & 5mm thick, 33cm height spaced 2meter centre to centre, fixed to Vertical Post C-channel of size 150mm*75mm&5mm thick cold roll formed section made from HR coils raw material conforming to IS-5986-2011 with minimum Grade 255 & with minimum yield stress of 255MPa, with 70cms free height above road or Ground level, and embedded to 110cms deep in cement concrete block of size 35cm*35*115cm or as directed by Engineer Incharge, assembled & fixed as per drawings of MORTH&H Circular No.RW/NH/33022/1/94-DO/III, dated 24/6/1994 & construction operation as per 811 or revevant MORT&H specifications for Roads & Bridge Works (latest edition). All fittings (bolts, nuts, fasteners, washers etc.) shall be conforming to IS:1367 & IS:1364 & galvanished by hot dip zinc coated process @0.55kg/m2 conforming to relevent IS specifications all etc. complete 41 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous SurfaceProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. 42 Overhead Signs (Providing and erecting overhead signs with a corrosion resistant aluminium alloy sheet as per IRC :67 2012 made of high intensity Grade sheeting using ASTM sheeting C type XI micro prismatic retro reflective material with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans)A 10 years warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor. 43 Truss and Vertical Support 44 Aluminium alloy plate for over head sign 45 CROSS DRAINAGE STRUCTURES. R.C.C. Slab Culvert(1m Span- 7 Nos, 2m Span -3 Nos. , Two span 3.0m span RCC Small Bridge - 4 Nos.) 46 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. 47 Sand Filling in Foundation Trenches as per drawing and technical specification Clause 1108. 48 Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 49 Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203Qty. below GL. 50 Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204. ( M15 (PCC 1:2.5:5)Qty. above GL. 51 Plain/Reinforced cement concrete(M-20) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 52 RCC M25 in Deck Slab :-- Providing and laying reinforced cement concrete in superstructure (Deck slab M25) as per drawing and technical specifications Clauses 800,1205.4, 1205.5 53 Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications 54 Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight 55 Providing Weepholes in brick masonary , Plain / Reinforced concrete abutement , wing wall , return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of 1V: 20H towards drawing 56 Drainage spouts complete as per drawing and technical specifications Clause 1209. 57 Rubble packing with hard laterite stone under floors including watering, ramming & consolidating etc. complete 58 Dismantling of Cross Drainage Works. Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work,bsteel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceablematerial with all lifts and lead of 1000 m as per Technical Specification Clause 202. 59 B) Cement Concrete 60 C) Reinforced Cement Concrete 61 Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202. 62 Add 1% Labour Cess on total constructions cost
Contract Date: Jun 30, 2026 Contract Value : ₹ 6.91 Crore
Government Departments No of Bidders 2
Goa View Result →
50.
Educational and Research Institute #10431202 Price Bid
Notice Inviting Tender For Manufacturing, Supply And Installation Of Library Furniture At Iim Sirmaur , Single Seater Sofa Size - 870W X 850D X 780H Mm Seat Height 420 Mm • Soft Seating With Back Support Made With 16-18 Mm Plywood. • Further Covered With Non Water Absorbent, High Density Foam Of Density <= 40 • Martin - Dale Abrasion Resistance25000 To 30000 Cycles • Color Fastness To Lighting - 4 • Composition - Polyester - 100% • Weight Not Less Than 360 Gsm •Base Option - Ss Studs (Grade 304) 50 Mm Dia Medium Weight, 100 Mm Long With Buffer. , Two Seater Sofa Size - 1500W X 850D X 780H Mm Seat Height 420 Mm • Soft Seating With Back Support Made With 16-18 Mm Plywood. • Further Covered With Non Water Absorbent, High Density Foam Of Density <= 40 • Martin - Dale Abrasion Resistance25000 To 30000 Cycles • Color Fastness To Lighting - 4 • Composition - Polyester - 100% • Weight Not Less Than 360 Gsm •Base Option - Ss Studs (Grade 304) 50 Mm Dia Medium Weight, 100 Mm Long With Buffer. , Three Seater Sofa Size - 2010W X 850D X 780H Mm Seat Height 420 Mm • Soft Seating With Back Support Made With 16-18 Mm Plywood. • Further Covered With Non Water Absorbent, High Density Foam Of Density <= 40 • Martin - Dale Abrasion Resistance25000 To 30000 Cycles • Color Fastness To Lighting - 4 • Composition - Polyester - 100% • Weight Not Less Than 360 Gsm •Base Option - Ss Studs (Grade 304) 50 Mm Dia Medium Weight, 100 Mm Long With Buffer. , Round Pouf Size - Ø 450 X 450 H Mm Seat Height- 450 Mm • Structure Made Up Of Polyurethane Foam Block Of Approved Quality Supported With 16-18Mmbwpply Confirming To Is 710:2010 At The Bottom To Fasten 50X25 Mm Nylon Glides Below It. • Approved Pu Foam To Have Density Of<= 40Having Premium Grade With Moderate Resilience. • Covered With Removable Polyester Fabric. • Martin - Dale Abrasion Resistance 25000 To 30000 Cycles • Color Fastness To Lighting - 4 • Composition - Polyester - 100% • Weight Not Less Than 360 Gsm • Bottom Feet 50 X 25 Mm Nylon Glides Below It. , Round Cushions Size- 600 Dia X 80 H Mm • Structure Made Up Of Polyurethane Foam Block Of Approved Quality • Approved Pu Foam To Have Density Of<= 40Having Premium Grade With Moderate Resilience. • Covered With Removable Polyester Fabric. • Martin - Dale Abrasion Resistance 25000 To 30000 Cycles • Color Fastness To Lighting - 4 • Composition - Polyester - 100% • Weight Not Less Than 360 Gsm , Coffee Table Rectangle Size - 1200 W X 600 D X 450 H Mm • Table Top Shall Be Made In 18Mmbwpply Confirming To Is 710:2010With 1Mm Thick Decorative Laminate On The Top And 0.6 Mm Thick Balance Lamination On Bottom Side Of Approved Shade. Exposed Edges Covered With 2Mm Thick Edge Bending With Using Hot Melt Eva Glue• Powdercoatedbase In Trirod Pattern Made Up Of 18 Mm Dia Msbar Of Approved Shade And Color With Coating Thickness 60 Micron With Proper Treatment. Buffers Should Be Provided At Contact Point With Floor. • The Minimum Factor Of Safety Considered Is 1.65 On Yield Stress.The Allowable Deflection Will Be Limited To Span/200. , Coffee Table Rectangle Size - 900 W X 600 D X 450 H Mm • Table Top Shall Be Made In 18Mmbwpply Confirming To Is 710:2010 With 1Mm Thick Decorative Laminate On The Top And 0.6 Mm Thick Balance Lamination On Bottom Side Of Approved Shade. Exposed Edges Covered With 2Mm Thick Edge Bending With Using Hot Melt Eva Glue• Powdercoatedbase In Trirod Pattern Made Up Of 18 Mm Dia Msbar Of Approved Shade And Color With Coating Thickness 60 Micron With Proper Treatment. Buffers Should Be Provided At Contact Point With Floor. • The Minimum Factor Of Safety Considered Is 1.65 On Yield Stress.The Allowable Deflection Will Be Limited To Span/200. , Coffee Table Square Size - 600 W X 600 D X 450 H Mm • Table Top Shall Be Made In 18Mmbwpply Confirming To Is 710:2010With 1Mm Thick Decorative Laminate On The Top And 0.6 Mm Thick Balance Lamination On Bottom Side Of Approved Shade. Exposed Edges Covered With 2Mm Thick Edge Bending With Using Hot Melt Eva Glue• Powdercoatedbase In Trirod Pattern Made Up Of 18 Mm Dia Msbar Of Approved Shade And Color With Coating Thickness 60 Micron With Proper Treatment. Buffers Should Be Provided At Contact Point With Floor. • The Minimum Factor Of Safety Considered Is 1.65 On Yield Stress.The Allowable Deflection Will Be Limited To Span/200. , Book Tub: Supplying And Placing In Place Book Tub Of Dimensionsize- 700 W X 700 D X 600 H Mm Of Following Specifications: • Structure Shall Be Made In 18Mmbwpply Confirming To Is 710:2010 With 1Mm Thick Decorative Laminate On The Visible Surface And 0.6 Mm Thick Balance Lamination Onunvisible Sides Of Approved Shade. Exposed Edges Covered With 2Mm Thick Edge Bending With Using Hot Melt Eva Glue . The Entire Structure Is To Be Mounted On Buffer. • Complete Modular Structure With Minifix Joinery. •All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Bucket Chair: Supplying And Placing In Place Arm Chair Ofsize - 650 W X 630 Dx 780 H Mm Seat Height 450 Mm. Chairshallbemadeupofsinglemouldedhighdensitypu Foam With Metal Under Structure Upholstered With Commercial Gradeapprovedfabricfortheseat.Basetobe Made Upsteam Beechwooden Frameand Legs, Properly Seasoned And Chemically Treated Finished With Pu Polish Matching To Approved Tone Of The Furnitures. Seat To Be Connectedwithframewith Approvedhardwareincluding Nutsandbolts.Commercialgrade Fabric (As Per Approved Shade)Madeupof100% Polyester, Having Gsm More Than 360 With Abrasion Resistance 25000 To 30000 Counts And Colour Fastness At Scale 4. •All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Carrel Double Seating: Supplyingandplacingincarrel-Doubleseating Of Size- 934 W X 1217 D X 1350 H Mm Complete Structure Madeupof18mmbwpply Confirming To Is 710:2010Including With1mm Thick Decorative Laminate Is 2046 : 1995 On Both Side Matching With Tabletop Andbalancing Laminate Of 0.6 Mm Thick Ofapprovedshade. Table Top Height Shall Be 750 Mm.Modesty Panel Shall Be Provided Between Two Desks In Bottom And Top. All Edges Finished With Polypropylene Edge Bands 2 Mm Thick Fixed With Hot Melt Eva Glue Withcornerandedge Rounding,Enablingzerosharp Elements Environment. Complete Structure With Minifix Joinery. Flip Up Box Having One Power Port And One Usb Convertible Port With Metal Raceway Along With Vertical And Horizontally Run For Wire With Junction Box Shall Be Provided.•All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Carrel Single Seating: Supplyingandplacingincarrel-Doubleseating Of Size- 934 W X 617 D X 1350 H Mm Complete Structure Madeupof18mmbwpply Confirming To Is 710:2010Including With1mm Thick Decorative Laminate Is 2046 : 1995 On Both Side Matching With Tabletop Andbalancing Laminate Of 0.6 Mm Thick Ofapprovedshade. Table Top Height Shall Be 750 Mm.Modesty Panel Shall Be Provided Between Two Desks In Bottom And Top. All Edges Finished With Polypropylene Edge Bands 2 Mm Thick Fixed With Hot Melt Eva Glue Withcornerandedge Rounding,Enablingzerosharp Elements Environment. Complete Structure With Minifix Joinery. Flip Up Box Having One Power Port And One Usb Convertible Port With Metal Raceway Along With Vertical And Horizontally Run For Wire With Junction Box Shall Be Provided. •All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Carrel Double Seater (Phd Student): Supplyingandplacingincarrel-Doubleseating Of Size- 1200 W X 1800 D X 1800 H Mm Complete Structure Madeupof18mmbwpply Confirming To Is 710:2010 With Working Table Top Of 25 Mm Thickess And1mm Thick Decorative Laminate Is 2046 : 1995 On Both Sides Matching With Tabletop Andbalancing Laminate Of 0.6 Mm Thick Ofapprovedshade. Table Top Height Shall Be 750 Mm. Modesty Panel Shall Be Provided Between Two Desks In Bottom And Top. Carrel Shall Have Lockable Storage Shutters With Ss Handle In Top Modesty. It Shall Have Fixed Led Study Light In Bottom Of Open Shelve For Each Seating. Suitable Arrangement Is To Be Made In Front Of Open Shelve For Holding Removable Name Plate. Front Modesty Shall Be Provided With Pin Up Fabric Board. All Edges Finished With Polypropylene Edge Bands 2 Mm Thick Fixed With Hot Melt Eva Glue Withcornerandedge Rounding,Enablingzerosharp Elements Environment. Complete Structure With Minifix Joinery. Each Sides Shall Be Provided With Flip Up Box Having 2X6 Amp. Power Port And Light Switch With Raceway Along With Vertical And Horizontal Run For Wire With Junction Box.•All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Carrel Single Seater (Phd Student): Supplyingandplacingincarrel-Doubleseating Of Size- 1200 W X 900 D X 1800 H Mm Complete Structure Madeupof18mmbwpply Confirming To Is 710:2010 With Working Table Top Of 25 Mm Thickess And1mm Thick Decorative Laminate Is 2046 : 1995 On Both Sides Matching With Tabletop Andbalancing Laminate Of 0.6 Mm Thick Ofapprovedshade. Table Top Height Shall Be 750 Mm. Modesty Panel Shall Be Provided In Bottom And Top. Carrel Shall Have Lockable Storage Shutter With Ss Handle In Top Modesty. It Shall Have Fixed Led Study Light In Bottom Of Open Shelve. Suitable Arrangement Is To Be Made In Front Of Open Shelve For Holding Removable Name Plate. Front Modesty Shall Be Provided With Pin Up Fabric Board. All Edges Finished With Polypropylene Edge Bands 2 Mm Thick Fixed With Hot Melt Eva Glue Withcornerandedge Rounding,Enablingzerosharp Elements Environment. Complete Structure With Minifix Joinery. Carrel Shall Be Provided With Flip Up Box Having 2X6 Amp. Power Port And Light Switch With Raceway Along With Vertical And Horizontal Run For Wire With Junction Box. •All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Chair : Providing&Placinginpositionchairasapprovedofsize 570Wx530dx 1000Hmmseatheight-450Hmm Seat Back In Mesh Of Approved Color With Curved Design And Seat Are Made Up Of12mmhot Pressedplywoodupholsteredinfabricand Moulded In Foam.The High Resilience Polyurethane Foam Is Moulded With Density=45+/-2 Kg/M3 And Hardness Load 16+/-2Kgfasperis:7888For25% Compression. Theseat And Back Are Arrested Together With A 9.0Cm (W) Spine Made Of 0.8Cm Thick Hr Steel. The Back Plywood Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Chair Shallhaveancenter Tiltmechanism Andtilt Tension Adjustment, Single Locking Facility And Full 360 Degrees Swivel Mechanism, The One Piece Arm Rest Should Be Made Up Ofblackintegral Skinpolypropylenewith50-70Shore“A” Hardness Reinforced With Ms Insert, The Armrest Are Scratch Andwhetherresistant.Thearm Restsarefittedtotheseat Withaconnectingstrip Assemblymadeof5mm Ofhr Steel. The Prong (Base) Is Made Of Chrome Plated Steel And Fitted With 5Nos. Twin Wheel Castors (Castor Wheel Dia. 50Mm). The Prong (Base) Is 660Mmpitchcenterdia(700Mmwithcastors).The Telescopicbellowsis3piecetelescopictypeandinjection Molded Inblackpolyurethane. Seat Maximum Height Is 540Mm & Minimum Height Is 440Mm & Back Height From Floor Maximum Height Is 1100Mm & Minimum Height Is 1000Mm. Gas Lift 100 Mm Telescopic Haudraulic. •All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Conference Table (08 Seater): Providingandfixing Inpositionofcustomised (Factory Made)Conference Tableof Required Size- 2400 W X 1200 D X750h Mmtabletopshallbemadeoutof25mmthick Commercial Plyof Bwp Grade Confirming To Is 710:2010,Including With 1Mm Thick Decorative Laminate Is 2046 : 1995 On Both Side Matching With Tabletop And Balancing Laminate 0.6 Mm Thick Ofapprovedshadeasperclientschoice.All Edgesfinished Withhot Melt Eva Glued-Onpolypropyleneedgebands With 2 Mm Thickwith Cornerand Edgerounding,Enablingzerosharpelements Environment. Powder Coatedbasein75x25rectangularframe. Powder Coatingofallthemetalunitsmustbeof60micron7tank Processwithovenbakingpowdercoated. Theminimum Factor Of Safety Considered Is 1.65 On Yield Stress. The Allowable Deflection Will Be Limited To Span/200. • Table Shall Have Adequate Arrangements For The Movement Of Electric And Lv Cables Seperately At Desired Levels With Wire Manager For Vertical Movement. Raceway Having Cut Outs Of Required Sizes Along With 02 Nos. Hydraulic Pop Up Box/Cable Cubby With One Number Hdmi,Audio, Lan And 04 Number 5/15 Amp. Power Ports In Each. • Frame Will Be 14 Gauge. Provisionfor All Electrical Components •All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Discusion Table: Providingandfixing Inpositionofcustomised (Factory Made) Discussion Table Of Required Size - 2100 W X 900 D X 750Hmm Table Topshallbemadeoutof25mmthick Commercial Ply Of Bwp Grade Confirming To Is 710:2010,Including With 1Mm Thick Laminate Is 2046 : 1995 On Top And Balancing Laminate Of 0.6 Mm Thick On Bottom, Of Approved Shade Of Colour As Per Clients Choice. All Edges Finished With Hot Melt Eva Glued - On Polypropylene Edge Bands 2 Mm Thick With Cornerandedgerounding,Enablingzerosharp Elements Environment. Powdercoated Base In 75 X 25 Rectangular Frame. Powder Coating Of All The Metal Units Must Beof60micron7tank Processwithovenbakingpowder Coated. The Minimum Factor Of Safety Considered Is 1.65 On Yield Stress.The Allowable Deflection Will Be Limited To Span/200. • Table Shall Have Adequate Provisions For The Movement Of Electric And Lv Cables Seperately At Desired Levels With Wire Manager For Vertical Movement. Raceway Having Cut Outs Of Required Sizes Along With02 Nos. Hydraulic Pop Up Box/Cable Cubby With One Number Hdmi,Audio, Lan And 03 Number 5/15 Amp. Power Ports In Each.• Frame Will Be 14 Gauge. Provisionfor All Electrical Components •All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Conference Table: Providingandfixing Inpositionofcustomised (Factory Made) Discussion Table Of Required Size - 4800 W X 1500 D X 750Hmm Table Topshallbemadeoutof25mmthick Commercial Ply Of Bwp Grade Confirming To Is 710:2010,Including With 1Mm Thick Laminate Is 2046 : 1995 On Both Side Matching With Tabletop And Balancing Laminate 0.6 M Thick Of Approved Shade As Per Clients Choice. All Edges Finished With Hot Melt Eva Glued - On Polypropylene Edge Bands With 2 Mm Thick With Cornerandedgerounding,Enablingzerosharp Elements Environment. Powdercoated Base In 75 X 25 Rectangular Frame. Powder Coating Of All The Metal Units Must Beof60micron7tank Processwithovenbakingpowder Coated. The Minimum Factor Of Safety Considered Is 1.65 On Yield Stress.The Allowable Deflection Will Be Limited To Span/200. • Table Shall Have Adequate Provisions For The Movement Of Electric And Lv Cables Seperately At Desired Levels With Wire Manager For Vertical Movement. Raceway Having Cut Outs Of Required Sizes Along With02 Nos. Hydraulic Pop Up Box/Cable Cubby With One Number Hdmi,Audio, Lan And 06 Number 5/15 Amp. Power Ports In Each.• Frame Will Be 14 Gauge. Provisionfor All Electrical Components •All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Discussion Table Round: Supplying And Placing Discussion Table Size Is 1200Mm (Dia) X 750Mm (H). Table Top Shall Be Made In 25 Mm Thick Commercial Plywood Of Bwp With 1Mm Thick Decorative Laminate On The Top And 0.6 Mm Thick Balance Lamination On Bottom Side Of Approved Shade. Exposed Edges Covered With 2Mm Thick Edge Bending With Using Hot Melt Eva Glue. Table Top Supported Metal Legs With Powder Coatedmustbeof60micron7tank Processwithovenbakingpowdercoated. The Metal Legs Of Size 50Mm X 50Mm Of Minimum 14 Gauge With 10Mm High Buffers Offer Ground Clearance For Easy Cleaning. , Cooke Tub Four Seater Pod Set With Table And Seating Arrangement: Supplying And Placing In Place Cooke Tub Four Seater With Pod Set Having Dimensions And Specification As Given Below: Pod Size Of Each Sides - 1280 W X 662 D X 1600 H Mm Table Size - 900 W X 600 D X 750 H Mm Table Top Shall Be Made Out Of 18Mm Thick Commercial Ply Of Bwp Gradeconfirmingtois710:2010,Includingwith1mm Thickdecorative Laminate Is2046:1995Onbothsidematchingwith Tabletopandbalancing Laminate 0.6 Mm Thickofapprovedshadeasper Clients Choice. Unsuported End Should Be Rested On 65 Mm Dia Power Coated Ms Pipe With Suitable Fixing Arrangement At Top And Bottom.Cook Tub Specification:Size- 1200 W X 622 D X 736 H Mm Structure - 25 Mm Foam Sheets With Powder Coated 15 X 15 Mm Welded Solid Bar Structure Covered With Layered Composite Of Fabric Approved Pu Foam To Have Density Of<= 40Having Premium Gradewithmoderateresilience.Upholsteredwith Approvedfabric With Moreorequalstomartin-Daleabrasion Resistance 25000 To 30000Cycles.Colorfastnesstolighting-4. Composition-Polyester- 100%.Weight Not Less Than 360Gsm. Pod Structure - Frame Should Be Made Of Medium Class Ms Tubular Section Of Size 50X25 Mm , Powder Coated Anchored Formally At The Floor Level And Walls At A Spacing Not Exceeding 600 Mm. The Frame Shall Be Mounted With 9 Mm Thick Bwp Ply On Uphotstered Sides. It Should Be Upholstered With 25 Mm Foam Sheets With Polyester Fabric On All The Sides. Approved Pu Foam To Have Density Of<= 40Having Premium Gradewithmoderateresilience.Upholsteredwith Approvedfabric And Design With Moreorequalstomartin-Daleabrasion Resistance 25000 To 30000 Cycles.Colorfastnesstolighting-4. Composition-Polyester- 100%.Weight Not Less Than 360Gsm. , Cooke Tub Single Seater: Supplying And Placing In Place Cooke Tub Single Seater Of Dimension Size- 620 W X 622 D X 736 H Mm Structure - It Shall Be Made Up Of Polyeurethane Block Of Size And Shape As Shown In Drawing And Of Approved Quality. The Block Shall Comprise Of The Base Of Thickness 250 Mm And Back Tapering From 100 Mm At The Top To 150 Mm At The Top Of The Base. The Block Should Be Uphotstered With Polyster Fabric Of Approve Make. The Block Shall Be Supported On A Frame Of Powder Coated 32X32 Mm Tubular Section Of Minimum 14 Gauge As Per Manufacturer Design.Approved Pu Foam To Have Density Of<= 40Having Premium Gradewithmoderateresilience.Upholsteredwith Approvedfabric With Moreorequalstomartin-Daleabrasion Resistance 25000 To 30000Cycles.Colorfastnesstolighting-4. Composition-Polyester- 100%.Weight Not Less Than 360Gsm. , Cooke Tub Three Seater: Supplying And Placing In Place Cooke Tub Threeseater Of Dimension Size- 1860 W X 622 D X 736H Mm Structure -It Shall Be Made Up Of Polyeurethane Block Of Size And Shape As Shown In Drawing And Of Approved Quality. The Block Shall Comprise Of The Base Of Thickness 250 Mm And Back Tapering From 100 Mm At The Top To 150 Mm At The Top Of The Base. The Block Should Be Uphotstered With Polyster Fabric Of Approve Make. The Block Shall Be Supported On A Frame Of Powder Coated 32X32 Mm Tubular Section Of Minimum 14 Gauge As Per Manufacturer Design.Approved Pu Foam To Have Density Of<= 40Having Premium Gradewithmoderateresilience.Upholsteredwith Approvedfabric With Moreorequalstomartin-Daleabrasion Resistance 25000 To 30000Cycles.Colorfastnesstolighting-4. Composition-Polyester- 100%.Weight Not Less Than 360Gsm. , Round Floor Table Size - Ø 900 X 330 H Mm Table Top Made Up Of 25 Mmthick Commercial Ply Of Bwp Grade Confirming To Is 710:2010,Including With 1Mm Thick Decorative Laminate Is 2046 : 1995 On Both Side Matching With Tabletop And Balancing Laminate 0.6 Mm Thick Of Approved Shade As Per Clients Choice. Edges Finished With 2Mm Self Glued Hot Pressed Pvc Edge Biding With Eva Glue. Base Made Up Of Metal Frame, Combination Of Square Tubes Of 14 Guage. Powdercoated Tubular Legs Of Dia 50 Mm With Buffers. Base Frame Will Be Finished Of Powder Coating. Powder Coating Of All The Metal Units Must Be Of 60 Micron 7 Tank Processwith Oven Baking Coat By Polyster Powder Coating. , Chair Bean Bag Size - 600 W X 500 D X 500 H Mm Made Up With Polyester Fabric. Martin - Dale Abrasion Resistance 25000 To 30000 Cycles Color Fastness To Lighting - 4 Composition - Polyester - 100% Weight Not Less Than 360 Gsm , Vinyl Bean Bag Size- 900 W X 600 D X 1200 H Mm Made Up With Polyester Fabric. Martin - Dale Abrasion Resistance 25000 To 30000 Cycles Color Fastness To Lighting - 4 Composition - Polyester - 100% Weight Not Less Than 360 Gsm , Large Triangular Bean Bag 1450 W X 1050 D X 1050 H Mm Made Up With Polyester Fabric. Martin - Dale Abrasion Resistance 25000 To 30000 Cycles Color Fastness To Lighting - 4 Composition - Polyester - 100% Weight Not Less Than 360 Gsm , Coffee Table Round Size- 600 Dia X 450 H Mm Table Top Shall Be Made In 18 Mm Thick Commercial Plywood Of Bwp With 1Mm Thick Decorative Laminate On The Top And 0.6 Mm Thick Balance Lamination On Bottom Side Of Approved Shade. Exposed Edges Covered With 2Mm Thick Edge Bending With Using Hot Melt Eva Glue • Powdercoatedbase In Trirod Pattern Made Up Of 18 Mm Dia Msbar Of Approved Shade And Color With Coating Thickness 60 Micron With Proper Treatment. Buffers Should Be Provided At Contact Point With Floor. • The Minimum Factor Of Safety Considered Is 1.65 On Yield Stress.The Allowable Deflection Will Be Limited To Span/200. , Centre Leg Coffee Table Round Size- 900 Dia X 450 H Mm Table Top Shall Be Made In 18 Mm Thick Commercial Plywood Of Bwp With 1Mm Thick Decorative Laminate On The Top And 0.6 Mm Thick Balance Lamination On Bottom Side Of Approved Shade. Exposed Edges Covered With 2Mm Thick Edge Bending With Using Hot Melt Eva Glue With Corner And Edge Rounding, Enabling Zero Sharp Elements Environment. Base Slides Under Couches Or Seats For Easy Movement & Space Saving. Base Made Up Of Laser Cutted 8 Mm Thick Plate Of 450 Mm Dia Arc Wielded With Ms Round Pipe Of Medium Class Dia 65 Mm With 50X25 Tubular Top Frame. Frame Structure Shall Be Minimum 14 Guage, Frame & Pipe Welded Together. Powder Coating Of All The Metal Units Must Be Of 60 Micron 7 Tank Process With Oven Baking Powder Coated. , Book Rack Storage Low Height Supplying And Placing In Place Book Rack Of Dimensionsize- 900 W X 450 D X 1240 H Mm Of Following Specifications: •Structuremadeupof18mmbwpplyconfirmingtois 710:2010. Laminated With 1 Mm Thick Decorative Laminate On Visible Surface And 0.6 Mm Balancing Laminate On Unvisible Surface As Per Approved Colour And Shade. •Edgesto Befinishedwith2mm Pvcedgebandedgingof Approved Make Using Glued With Hot Melt Eva Glue. • Complete Modular Structure With Minifix Joinery And Buffer At Bottom. •All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Baggage Counter Size - 1200 W X 400 D X 2007 H Mm • Structuremadeupof18mmbwpplyconfirmingtois 710:2010. Laminated With 1 Mm Thick Decorative Laminate On Visible Sides And 0.6 Mm Balancing Laminate On Unvisible Sides As Per Approved Colour And Shade. • Edgesto Befinishedwith2mm Pvcedgebandedgingof Approved Make Using Glued With Hot Melt Eva Glue. • Back Shall Be Made Of 12 Mm Bwp Ply With 1 Mm Thick Decoative Laminate On Visible Sides And 0.6 Mm Thick Balancing Laminate On Other Side.• Horizontel Parition Shall Be 12 Mm And Vertical Parititon Shall Be Of 18 Mm Bwp Ply. • The Complete Structure Shall Have 18 Number Compartments.• Buffers Shall Be Provided At Base. • Complete Modular Structure With Minifix Joinery. , Polar Storage Size - 900 W X 450 D X 2007 H Mm • Structuremadeupof18mmbwpplyconfirmingtois 710:2010. Laminated With 1 Mm Thick Decorative Laminate On Visible Sides And 0.6 Mm Balancing Laminate On Unvisible Sides As Per Approved Colour And Shade. • Edgesto Befinishedwith2mm Pvcedgebandedgingof Approved Make Using Glued With Hot Melt Eva Glue. • Back Shall Be Made Of 12 Mm Bwp Ply With 1 Mm Thick Decoative Laminate On Visible Side And 0.6 Mm Thick Balancing Laminate On Other Side.• Horizontel Parition Shall Be 12 Mm And Vertical Parititon Shall Be Of 18 Mm Bwp Ply. • The Complete Structure Shall Have 10 Number Compartments.• Buffers Shall Be Provided At Base. • Complete Modular Structure With Minifix Joinery. , Open Storage Size - 900 W X 450 D X 2007 H Mm • Structuremadeupof18mmbwpplyconfirmingtois 710:2010. Laminated With 1 Mm Thick Decorative Laminate On Visible Sides And 0.6 Mm Balancing Laminate On Unvisible Sides As Per Approved Colour And Shade. • Edgesto Befinishedwith2mm Pvcedgebandedgingof Approved Make Using Glued With Hot Melt Eva Glue. • Back Shall Be Made Of 12 Mm Bwp Ply With 1 Mm Thick Decoative Laminate On Visible Side And 0.6 Mm Thick Balancing Laminate On Other Side.• The Complete Structure Shall Have 05 Number Compartments.• Buffers Shall Be Provided At Base. • Complete Modular Structure With Minifix Joinery. , Shutter Storage Size- 900 W X 450 D X 2007 H Mm • Structuremadeupof18mmbwpplyconfirmingtois 710:2010. Laminated With 1 Mm Thick Decorative Laminate On Visible Sides And 0.6 Mm Balancing Laminate On Unvisible Sides As Per Approved Colour And Shade.• Back Shall Be Made Of 12 Mm Bwp Ply With 1 Mm Thick Decoative Laminate On Visible Side And 0.6 Mm Thick Balancing Laminate On Other Side.• Openable Shutter Shall Be Made Of 18 Mm Bwp Ply With 1 Mm Thick Decoative Laminate On Visible Sides And 0.6 Mm Thick Balancing Laminate On Other Side With Locking Arrangment. Ss Handle Of Minimum 150 Mm Shall Be Provided For Opening.• Edgesto Befinishedwith2mm Pvcedgebandedgingof Approved Make Using Glued With Hot Melt Eva Glue.• The Complete Structure Shall Have 05 Number Compartments.• Buffers Shall Be Provided At Base. • Complete Modular Structure With Minifix Joinery.•All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Book Trolley: Supplying And Placing In Place Book Trolley With Three Shelves Of Dimensionsize- 520 W X 480 D X 1090 H Mm Excluding Metal Trolley And Castor Of Following Specifications: •Structuremadeupof18 Mm Bwp Ply With 1 Mm Thick Decoative Laminate On Visible Sides And 0.6 Mm Thick Balancing Laminate On Other Side. The Entire Structure Is To Be Mounted On Duly Powder Coated Metal Frame Base And Back Support With 04 Numbers Of 50 Mm Dia Heavy Duty Castor Wheel With Brake Mechanism, Handles To Be Provided For Easy Movement Of Trolley From One Place To Another. •Edgesto Befinishedwith2mm Pvcedgebandedgingof Approved Make Using Glued With Hot Melt Eva Glue. • Complete Modular Structure With Minifix Joinery. •All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Magazine Display With Tilting Arrangement Size - 900W X 450D X 1830H Mm Structuremadeupof18 Mm Bwp Ply With 1 Mm Thick Decoative Laminate On Visible Sides And 0.6 Mm Thick Balancing Laminate On Other Side.• Back Shall Be Made Of 12 Mm Bwp Ply With 1 Mm Thick Decoative Laminate On All Side With Horizontel Parition 18 Mm Bwp Ply.• Edgesto Befinishedwith2mm Pvcedgebandedgingof Approved Make Using Glued With Hot Melt Eva Glue. • Provided With 15 Openable Shutters With Tilting Mechanism With 12 Mm Bwp Ply Laminated And Edge Bound As Mentioned Above With U Profile Of Suitable Size For Holding Display Magzine.• Provided With Buffers At Base.• Complete Modular Structure With Minifix Joinery. , Newspaper Reading Table Size - 900 W X 600 D X 1350 H Mm Structure Made Up Ofpowdercoatedmetal Structure With18 Mm Bwp Ply With 1 Mm Thick Decoative Laminate On Visible Sides And 0.6 Mm Thick Balancing Laminate On Other Side With 2 Mm Pvc Edge Band Edging With Hot Melt Eva Glue For Display Of News Papers. Complete Modular Structure With Minifix Joinery. Provided With Buffers At Base. , Double Sided Shelving Size- 900 W 714 D X 2135 H Mm Double Sided Open Shelving Unit Assembled From Post Of 2100 Mm H Made In 2Mm Thick 70 X 30 Mm Tube Punch Fitted In A Special Reinforced Having A 30 Mm Unf Nut On Adjustable Nylon Level Adjuster Having Loading Capacity Of 150 Kgs. Each Posts To Contain Six Flat Shelves Of 300 Mm Depth Made In 1.2 Mm Thick Cr Sheet With A Raised Lip At The Rear Of Each Shelf And Also With ‘C’ Channel On Front So That Each Shelf Can Be Fitted Perfectly In Clips Of The Brackets Of 1.8 Mm Thickness In Cr Without Any Screw, Weld Or Nut Features. Assembly Of Each Shelf Should Be At Minimum 300 Mm From Other. Both Sides Shelves Must Be Having Height Adjustment Feature On Clips Of Brackets. All The Post Should Be Manufactured In A Way That It Can Be Accommodated With Spine Out Display Shelves. Powder Coating Of All The Metal Units Must Be Of 60 Micron 7 Tank Process With Oven Baking Powder Coated. The Minimum Factor Of Safety Considered Is 1.65 On Yield Stress. The Allowable Deflection Will Be Limited To Span/200. , Standard Slatwall Bayend Panel 714 W X 17 D X 2111 H Mm The Double-Sided Bay End Panel, Sized 714 W X 18 D X 2111 H Mm, Is Made From 18 Mm Bwp Ply With 1 Mm Thick Decoative Laminate On Visible Sides And 0.6 Mm Thick Balancing Laminate On Other Side With 2 Mm Pvc Edge Band Edging With Hot Melt Eva Glue. The Panel Includes Two Aluminum T Profiles For Mounting Acrylic And Sandwich Displays (270 W X 357 L Mm), With An 8 Mm Groove And 28 Mm Back, Grouted Along 18 Mm Plywood, Cut Using Cnc Routing. The Slatwall Integrates 3 Mm Thick Laser-Cut Acrylic For Signage And Book Hanging, With A Softening Temperature Of Approximately 102 °C And Water-Insolubility. The Laminate Meets High Durability Standards: Wear Resistance >400 Revolutions, Water Immersion Mass Increase 10% Max, Thickness Increase 7% Max, Impact Resistance 25N Min, Scratch Resistance 3 N Min, And Color Change Resistance Per Is: 2046-1995. It Also Resists Steam, Cigarette Burns, Cracking, And Staining , Acrylic Holders 3 Mm Thick Laser Cut Acrylic Display For Placing The Books. Acrylic Display Shall Have Softening Temperature Approx. 102 °C / 216 °F And Insoluble In Water. , Sleeping/Napping Pod: Supply, Installation, Testing And Commissioning Of The Podcomparable To The Reference Image. This Shall Have: A. Ergonomic Designed To Reduce Pressure On The Cardiac System By Elevating The Feet. The Seat Contour Should Help In Relaxing The Muscles Of The Lower Back By Bending The Knees Slightly. B. Upholstery High Quality Synthetic Leather Upholstery Which Is Super Comfortable, And Durable And Easy To Clean And Maintain. C. Feature To Rotate Privacy Visor To The Desired Position To Provide Semi Privacy Without Making The Person Lying Enclosed Or Claustrophobic But At The Same Time Be Easily Able To Block Out Distractions. D. An Interface Console Enabling A Person To Set The Timer To The Desired Duration, Or Simply Use The One-Touch Start Button For A Pre-Programmed 20-Minute Nap. E. Status Indicator – The Status Indicator Should Feature Red And Green Occupancy Lights. The Lights Should Also Communicate Time Remaining During Use, Making It Easy For Users To See When The Pod Is Available, And If Currently Occupied, When It Will Next Be Free. F. Usage Tracking Feature – The System Should Record Usage Data, Which Can Be Translated Into Individual Device Reports. Usage Across Devices Can Then Be Compared For Effectiveness, Producing Valuable Information For Facility Management. G. Understructure And Exterior: Understructure Shall Be Sturdy And Exterior Should Be Appropriate Material And Aesthetically Sound. , Circulation Counter Size - 2400 W X 750 D X 1050 H Mm Complete Structure In Commercial Plywood 16 Mm Thk. Finished With 1 Mm Laminate On Table Top & Sides, & Inner Structure To Be In 0.8 Mm Laminate Of Approved Shade As Per Clients Chopice. All Edges Finished With Glued - On Polypropylene Edge Bands With Corner And Edge Rounding, Enabling Zero Sharp Elements Environment. Provided With Fixed Padestal At Base , Which Have 3 Drawers On Drawer Channel & C Type Handle.•All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be Of International Standard. , Curved Bookcase With Seating With Back Size - 1372 W X1000 D X 900 H Mm ( Seat Height : 450 H) Bookcase Made Up Of17 Mm Prelaminated Mdf Finished With 2 Mm Pvc Edge Band. Provided With Acrylic At Back For Stability Soft Seating Made Up Of Metal Under Structure Covered With Plywood. Further Covered With Non Water Absorbent, High Density Foam Of Density <= 40, Martin - Dale Abrasion Resistance >= 20000 Cycles, Color Fastness To Lighting - 4, Composition - Polyester - 100%, Weight- 360 Gsm Botton Fit 50X25 Mm Nylon Glides Below It. , Mobile Newspaper Display 824 W X 824 D X 1500 H Mm Product Made Up Of 17 Mm Prelaminated Mdf Finished With 2 Mm Pvc Edge Band. Display At All 4 Sides For Newspaper In Acrylic Holder
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Himachal Pradesh View Result →
TenderDetail
Loading tenders