View Bid Results For Hanger Fabrication Tenders

We found 372 Bid Results related to hanger fabrication tenders. You can find Contractor details who won hanger fabrication tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–8 of 372 tenders matching your filters

Housing Urban and Rular Development #11306856 AOC

Contract Date: Apr 23, 2026 Contract Value : ₹ 21.93 Lakh

Government Departments No of Bidders 5

Madhya Pradesh View Result →

Public Administrative Department #11290947 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 142

Uttar Pradesh View Result →

Power #11221425 AOC

Tender For Overhauling Of Boiler Pressure Parts Of Unit 5 Btps- 1 Cleaning of furnace Zone, PLSH, FSH, FRHby HP water Jet. 2 Supply & errection of proper scaffoldingmaterials for furnace and other areas. Use of coir rope is strictly prevented inside Boiler. 3 Scaffolding of FSH,PLSH,FRH area uptoroof top 4 Sealing at top of bottom ash hopper bySteel planks, GI sheet and gunny bags 5 Pent house and dead chamber cleaning 6 Penthouse & dead chamber repairing 3mmMS plate welding 7 Overhauling of boiler drum 8 Insertion joint of tube Size: 63.5X5.4mm ;Mat: BS3059/45S2 orSA210Gr.C, including replacement of bend along with RT of joints 9 Insertion joint of tube Size: 82.5X7 mmInsertion joint of division wall tube, Size: 82.5X7, Mat:BS3059/45S2 or SA210Gr.C along with RT of Joints 10 Insertion joint of furnace roof , Size: 63.5X5.4, Mat:BS3059/620S2 or SA213T11 alongwith RT of joints. 11 Insertion joint of Bleed tube alongwithRT of joints. 12 Insertion joint of PLSH and FSH tube,Size: 44.5X7, Mat:SA213T22 including bend alongwith RT of Joints. 13 Insertion joint of FSH & FRH tube, Size: 50.8X3.6 mm, Mat:SA213T91 including bend alongwith RT of joints. 14 Insertion joint of PSH bottom bank tubeSize: 63.5X6.3, Mat:BS3059/45S2 or SA210Gr.C alonwith RT of Joints. 15 Insertion joint of PSH middle bank tubeSize: 63.5X8.8 mm, Mat:BS3059/45S2 or SA210Gr.C alongwith RT of joints. 16 Insertion joint of PSH top bank tube ,Size: 57.1X6, Mat:BS3059/620S2 or SA213T11 alongwith RT of joints alongwith RT of Joints 17 Insertion joint of Economiser tube 38.1 x 3.6 mm, Material BS 3059/45S2 along with RT of Joints. 18 Insertion joint of PRH bottom & Middlebank tube Size:63.5X3.6, Mat: BS3059/45S2 or SA210Gr.A1 alonwith RT of Joints. 19 Insertion joint of PRH top bank tube , Size:57X3.2, Mat:BS3059/620S2 or SA213T11 including RT of joints. 20 joint cage rear wall & baffle wall tube Insertion joint of cage rear wall & baffle wall tube above main cavity, Size: 63.5X4.8, Mat: BS3059/620S2 or SA213T11 21 Platen SH, Final SH, Primary RH additional loop & Final RH coil pulling ,inspection and proper alignment of coil and panel with clit and support welding (by SS bar and clamp) 22 D-metering of boiler tubes in all the high pressure zones of the boiler viz. platen SH, Final R/H, Final S/H, Screen and cage wall, furnace wall, roof tubes, PSH tube,PRH tube,Baffle wall, economiser tube etc. and in boiler 1st & 2nd pass (minimum 4500 points) 23 Radiography of Old and DMW joints 24 Stress relieving of welding joints as per WPS. 25 Inspection and servicing of buck stay Cleaning,Inspection and servicing of buck stay alongwith lubrication of hinge points and Steelwork (including T and channel connecting joint with tube) 26 Replacement of stub at different header 27 Skin casing welding by MS Electrode 28 Welding of membrane strip by HP weilder 29 Deposition of weld metal on tubes/stubs/ header etc. 30 Servicing and repairing or replacement or replacement of seal plate (net), dipper plate and trough seal boxand necessary scaffolding 31 Refractory work (manholes, peep hole, wall blower, burner quarl, goose neck to straight tube, as per requirement etc.) 32 Scaffolding of Economiser Zone,PSH & PRH and cleaning of same by LP water. Sealing of economiser hopper 33 Inspection and run welding of economizer Hoper , All bracing pipe inspection , changing as per requirement, guard angle fitting upto APH inlet damper 34 Removal and fitting of guard tube, guard plate. 35 Replacement of Economiser Coil 36 PSH/PRH coil lifting or pulling, inspection and fitting with proper alignment (including terminal joints 20and RT) 37 Fabrication of different sizes of bends 38 Insulation work (de-insulation and re-insulation) 39 Man hole/ peep hole door servicing. 40 Servicing of Wall Blower & LRSB 41 Replacement of HP valve, Size: 1/2 to 2” 42 Engagement of 1 nos. Safety v/v expert 43 Servicing of Valve size above 40 mm upto 80 mm 44 Servicing of Valve size above 80 mm upto 100 mm. 45 Servicing of Main steam Stop Valve 46 Servicing of Eco Inlet Isolating Valve 47 Servicing of Eco Inlet NRV 48 Servicing of Start-up vent Isolating valve. 49 Servicing of FCS Isolating valve 50 Main steam safety valve 75 mm 51 Drum safety valve 75 mm 52 Cold reheat safety valve 153 mm 53 Safety valve sheet cutting 54 Trivy test and Assistance to trivy test for Drum,SH,CRH&HRH safety valve 55 Servicing of MS Safety Valve escape pipe including rectification of hanger support 56 Arrangement of require crane/hydra with fuel and operator. 57 Replacement of high pressure line (1/2 to 4) (Unit of 01 Number includes two joints& maximum tube length: 6 meter.) 58 Main steam safety valve sheet cutting

Contract Date: Jun 04, 2026 Contract Value : ₹ 2.20 Crore

Government Departments No of Bidders 2

West Bengal View Result →

Power #11202992 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jharkhand View Result →

Banking and Finance #11189711 AOC

Contract Date: Ref. Documents Contract Value : ₹ 17.92 Lakh

Government Departments No of Bidders 5

Maharashtra View Result →

Housing Urban and Rular Development #11118160 AOC

Tender For Modular Operation Theatre Items At Sadar Hospital, Jamtara At Jamtara For The Year-2025-26 , Wall And Ceiling Cladding (Approved Makes: Jindal/Tata/Essar) Prefabricated Wall & Ceiling Prefabbicated Modular Operating Theater Using Ppgi Puf Panel (Both Wall & Ceiling) Providing Of Pre-Fabricated Modular Operation Theater With Ppgi Puf Pannel Filled With Puf Of 40 Kg/Cubic Meter (40D) Having Required Mechanical Strength And Better Thermal Insulation Which Saves Energy Construction The Panels Joints Are Properly Cam Locked & Revisited Which Provides A Seamless Sub- Structure Which Again Sanded To A Smooth Finish. Approx. Thickness For Wall 50 Mm, Raiser 40 Mm. And Ceiling 30Mm. , Laminar Air Flow System Supply Installation Testing And Commissioning Of Ceiling Filtration System 2400 X 2400 Mm. The Ceiling Filtration System Shall Be 2.40 Meters X 2.40 Meters And Will Be Integrated With The Adjacent False Ceiling. The Ceiling Shall Be Constructed With A Plenum Box Supplied With Conditioned Air From The Central System Via 8 Nos.Hepa Filters (European Norm En1822:2009; Class H14; Dop 99.97-99.9999% Efficincy For 0.3 Micron Particles) With Pressure Drop Of 300 Pascals At Its Nominal Flow Rates (Supplied With The Plenum), Mounted On The Exit From The Supply Ducting. , Conductive Seamless Flooring With Coving On All Corners Supply Installation Testing And Commissioning Of Operation Theatre Flooring (Antistaic Conductive):2 Mm. Full Body Conductive Vinyl, Laid On A Semiconductive Adhesive Base. The Floor Finish Sholuld Terminate At The Room Perimeter Passing Over A Concealed Cove Former And Continuing Up The Wall For 100Mm. All Joints Should Be Weled With Electrodes Of The Same Compatible Material To Provide A Continuous Sealed Surface , Hermetically Sealed Sliding Door System Fabrication Supply, Installation, Testing & Commissioning Of Sliding Type Hermetically Sealed Ot Door Having High Density Partical Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Size:1800 X 2100 Mm.(Wx H). Automatice Doors: Provided With Radar Switch- 2 Nos., Foot Switch Nos. And Photocell Sensors (Anti Crush Feature) & As Per Tech. Specs.Attached. Automatice Doors Size:(1800 X 2100 Mm.) , Peripheral Lights Supply Installation And Commissioning Of 42W Bottom Opening Room Fixture With Ip 65, Led Make Should Be Nichia/Seoul5 Sdcm, Own Make Bis Certified Islocated Driver, Flicker Free, Class2 Selv Driver, Operating Temperature:-100C To 450C Operating Voltage Range:140-270V, Surge Protecction 3.5 Kv, High Effciency Driver:80-85%, Low Voltage Cut Off Below 130V, Output Short Circuit Protction, Fixture Made Up Of Ms Power Coated White After Phosphochromate Treatment Provided As Standard With Sheet Thickness Of 1.2 Mm. Diffuser Of High Impact Polycarbonate Opal Diffuser With Thickness 1.5Mm For Glare Freeuniform Light Distribution, Power Coating: 60Microns, Lamp Source: High Efficiency Long Life Led Package In Integral Module To Ensure Better Uniformity, Average Life L70b50: 50000 Hours,Thd10%,95, System Efficacy 95-100 Lm/W, Cri80, Ip65, Ik05 Impact Rating, Dimension Will Be , Surgeon Control Panel Supply, Installation, Testing & Commissioning Of Operation Theatre Control Panel Membrane Type: Time Day Clock Time Elapse Clock General And Rgb Lighting System Conntrol (Peripheral Lights And Plenum Lights With Dimming) Medical Gas Alarm Panel 5 Gas- Low, Normal And High Pressure With Sequencing As Per Htm 02 01 Hand Free Telephone Set With Speaker Temperature & Humidity Indicator With Controller Hepa Filter Status Module Room Pressure Indicator/ Differential Pressure Indicator , X-Ray View Screen Supply Installation, Testing & Commissioning Of Twin Plate Led Xray Viewing Screen: Size:940 X 640 X 50 Mm. Approx With Viewing Area, Two Plate X-Ray View Screen (120W), Led Based Technology With Colour Temperature6000k And Lamp Life50,000 Hrs And Brightness In Excess Of 4000 Lux. , Writing White Board Supplying & Fixing Of Sturdy Writing Operating List Board: Made Of Ceramic Surface Having Magnetic Properties And Should Be Flushed To The Wall Of The Operating Room Size 940Mmx 640Mmx 50Mm , Surgeon Pendant Providing & Fixing Of Ceiling Mounted Single Arm Pendant Systems For Surgeon: The Weight Carrying Capacity Of The Arm Should Not Be Less Than 180 Kgs. Load. There Should Be 5 Or 6 Nos. Equipment Loading Shelves. Double Column Of 1000Mm. Single Arm Pivot Range Minimum 900 Mm. Or Above. The Brake (Electromagnetic) Supplied With Indian Origin Multipin 6/16 Annual Periodical Maintenance Electrical Switch+Socket-5Nos. It Should Have 2 No. Rj 45 Data Socket. It Should Have Provision For 06 Gas Outlet Points 2 Oxygen 1 Sa7 1Co2 1 Vacuum Capable Of 340 Degrees Of Rotation. Medical Gas Terminal Units Shall Be Provded By The Mgps Vendor And Shall Be Installed In The Pendant. Usfda , Anesthesia Pendant Ceiling Mounted Rigid Pendant Systems For Anaesthesia: Single Arm Motorized Type Pendants Made Of Aluminum, Powder Coate Dimensions: Double Vertical Column 1200 Mm. Vertical Lift:600 Mm. Horizontal Arms- Total 1000 Mm. Pendant Should Be Prepiped Provided With 5 Nos. Medical Gas Outlets. Outlets Shall Be Connected To Dual Circuit Being Provisioned For All Ozygen 2 Outlets. Nitrous Oxide 1 Outlets Vacuum 1 Outlets. Medical Air 1 Outlets Agss 1 Outlet Colour Coded High Pressure Tubing For Each Gas With Nist Connectors At Ceiling Provided With Prewired 10 Nos 6/16 Amps Sockets And Two Data Sockets Rj45 Instrument Loanding Capacity 180 Kgs. Shelves: Two With Handle And Two Rail Each With Capacity Of 40 Kgs. Drawers One With Handle And Twe Rails Load Capacity 40 Kgs. Swiveling Stainless Steel Vertical Pole , Air Conditioning System: Ahu Supply, Installation & Commissioning Of Air Handling Unit Make: Vts (8.5Tr) (Out Door Unit Make: Blue Star / Carrier) , Aluminum Duction 22 Gauge With Curves & Bends Where Indicated For Easy Flow Of Air Tight By Applying Silicon Sealant After Fabrication. Hangers Will Be Provided To Ducts & Will Be Suspended Be Means Of G.I. Coated Rod & These With Not Be More Than 2.5 Mtr. Apart. Thermal Insulation With 19Mm. Xpe With Aluminum Foil For Supply & 13Mm. Xpe Return Air Ducts. Joints Will Be Lapped With Nitrile Tape For Better Insulation. (Laminar To Ahu & Return Air In All Four Corners) Ahu To Be Placed Near Ot, Not More Than 6 Meters. , Dustbin (Trio) , Storge Unit: Storge Unit: 1 Mm. Thick Stainless Sheet 304. The Storge Unit Should Be Divided 4 Equal Parts And Eachpart Should Have Indivdual Swing 8 Mm. Toughened Glass Door With Quality Stanless Steel Self- Closing Hinges Capable Of 180 Degree Swing Out And Secure Locking System. Each Part Will Be Provided With Removable Stainless Steel Racks Made From½ Circular ( Outer Diameter) Seamless Stniless Steel 304 Tubes Of 1 Mm. Thickness Placed At Intervals Of 1.5 Center To Center. The Overall Dimension Of The Stroge Unit Shall Be 1500 Mm. (Width) X 2100 Mm. (Height) 350 Mm. Depth Being Variable To Suit Architectural Layout. , Supplying, Installation, Testing & Commissioning Of F Floor Mounted, Scrub Station: Compact Surgical 2 Bay Scrub Sink Designed For Use In Ot Complex. Each Fixture Fabricated From Heavy Gauge 1 Mm. Thick Type 304 Stainless Steel Of Seamless Welded Construction, Polished To A Smooth Finish With A Front Access Panel Which Should Include, Stoppers And Strainers. Hands Free Operation Should Include Infra-Red Sensors With Built-In Range Of Adjustment. Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature. User Defined Setting Of Approximately 1 To 3 Min Should Be Available. (Size 1500Mm. X 675Mm. X 1105Mm. For 2 Persons , Electrical Db Supply Installation Testing And Commissioning Of Electrical Distribution Board: Should The Trandformers, If Any, Mains Failure Relays, Electrical Distrition Equipment And Circuit Protection Equipment For All Circuits Within The Operating Theatre. All Internal Wiring Should Terminate In Connectore With Screw And Clamp Spring Connections Of The Clip-On Type Mounted, On A Din Rail And Labelled With Indelible Propritary Lables, Individual Fuses Or Miniature Circuit Breakers Should Protect All Internal Circuits. , Pressure Relief Damper Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Relief Dampers: Suitably Sized Air Pressure Relief Damper Should Be Placed Endabling Differential Room Pressure To Be Maintained.Counter-Weight Balancing System Should Be Prvided In The Prd To Maintain Positive Pressure Inside The Operation Room , C-9001 Supreme, Sliding Top Electric Table , C-9001 Supreme, Sliding Top Electric Table Led Operating Light Led Operating Light Having Following Specifications:- Maximum Luminance (1M): 160,000+160,000 Lux At 1 M Distance, Electrical Power: 150+90W, Power Consumption 2 X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1 X 3600/ 1 X 3300, Recommended Room Height At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm/650 N, Light Body Weight 9.2 + 7.5 Kgs, Light Body Depth: 1 X 130 Cm / 1 X 140 Cm, Air Shielding Surface 2 X 330 Cm2 Transformers: 2 X 450Va/ 230V/26V, Brightness Regulator 2 X 20- 500Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Done Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs: , Uv System: Uv Rays Are Very Effective In Killing A Large Number Of Pathogenic Organisms Of Bacterial, Viral And Fungi Commonly Seen In Operating Theaters Such As Pseudomonas, Clostridium Difficile, Mrsa And Vre , De- Fumigation System: Fumigation In Operation Theatre Is A Process Of Gaseous Sterillization That Is Used For The Killing Of Micro-Organisms And Prevention Of Micro-Organisms And Prevention Of Microbial Grwth In The Air, The Surface Of The Wall, Or The Floor1.000 De-Fumigation Control Panel Is Installed Outside The Operation Theatre To Monitor The Room Pressure And To Start The De- Fumigation System From Outside The Operation Theatre, It Will De-Fumigation The Theatre In A Given Time And Will Switch-Om The Ahu To Increase Operation Theatre Pressure Without Operating The Surgeon Control Panel , Ot Corridor Area & Ot Complex With Per And Post Area Conductive Seamless Flooring With Coving On All Corners Supply Installation Testing And Commissioning Of Operation Theatre Flooring (Antistaic Conductive):2 Mm. Full Body Conductive Vinyl, Laid On A Semiconductive Adhesive Base. The Floor Finish Sholuld Terminate At The Room Perimeter Passing Over A Concealed Cove Former And Continuing Up The Wall For 100Mm. All Joints Should Be Welded With Electrodes Of The Same Compatible Material To Provide A Continuous Sealed Surface , Antibacterial / Antifungal Paint Providing And Applying Antibacterial Paint The Internal Surface Of The Room Walls Will Be Sprayed With Water Based Liquid Plastic Wall Glaze Or Equivalent Anti- Bacterial Paint, Approved By The Architect To A Mimnimum Dry Film Thickness Of 300 Microns. The Plastic Coating Will Overlap The Floor Covering Ceiling System And Doorframes By 25 Mm. To Provde A Continuous Sealed Surface. The Plastice Coating Will Be Non- Reflective And The Colour Will Be Submitted To The Architect For Approval. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)

Contract Date: Jun 15, 2026 Contract Value : ₹ 1.21 Crore

Government Departments No of Bidders 4

Jharkhand View Result →

Science and Technology #11116750 AOC

Installing Testing And Commissioning Of Bypass System And Fabrication Of Necessary Arrangements For Hydrulic Model Studies Of Kaleshwaram Project At River Hanger Cwprs Pune 24

Contract Date: May 19, 2026 Contract Value : ₹ 5.05 Lakh

Government Departments No of Bidders 5

Maharashtra View Result →

Home Affairs #11096827 AOC

PURCHASE OF DIFFERENT ARTICLES FOR DEPARTMENTAL STORE OF SPECIALIZED INDIA RESERVE BATTALION, RAJNAGAR, BIRBHUM. Purchase Of Miscellaneous Articles For Departmental Store , Alluminium Utensil , Alluminium Ladder (8) , Allen Key Set , All-Outliquidator Machine , All-Out Liquidator , Alluminium Can (Big Size) , Alluminium Degchi (Raja) , Alluminium Frying Pan (Taj) , Alluminium Gamla (Taj) , Alluminium Handi (Raja) , Alluminium Karai (Raja) , Alluminium Nouka / Rice Tub (Raja) , Alluminium Plainsheet , Alluminium Saucepan (Raja) , Alluminiun Bucket (12) (Raja) , Alluminiun Bucket (14) (Raja) , Alluminiun Jug (Raja) , Alluminiun Tea Kettle (Raja) , Arial(500 Gm) , Arrowrot , Airwick Freshmatic Automatic Air Freshiner , Asbestos Sheet 2.5’X12’ (Everest) , Axe (Tata) , Bugle Cord , Bugle , Breath Analyzer , Blanket Woolen Single , Blanket Woolen Double , Black Tape 09 M Length , Betadine Lotion , Bike Helmet (Bestquality) Isi Mark , Bib Cock Pvc , Bernal , Bp Trumpet , Battery Nippo For Megaphone , Batali , Bass (Big) Drum , Baga Wrench (Pipe Wrench) , B^B Trombone (Tenor) , B^B Euphoniom , B^B Clarinet , Badminton Net (Falcon) , Brasso 250 Ml , Badminton Nylon Shuttle Cock ,Mavis -500(Yonex) , Badminton Racket (Yonex , Gr -303) , Badminton Racket (Yonex, Carbonex 6 Super) , Badminton Racket String , Bamboo Big Size , Bamboo Ladder 20 Fit. , Barbed Wire , Basin ( Hind Wear) , Basin External Pipe , Batterymedium (Eveready) , Battery Calling Bell (Eveready) , Battery Pencil(Eveready) , Battery Remote(Duracell) , Bed Sheet 5’X7’ (Bombay Dying) , Belchabig (Tata) , Bleaching Powder , Bib Cock2 -In -1 , Bib Cock (Brass) , Bib Cock (Steel) , Binocular (1.5 K.M.Range)- Nikon , Bitumin (Pitch) , Black Board Wooden (3’X4’) , Black Paper , Blade For Hacksaw , Brass Bell , Blue (Robin) , Bone Dust , Bowl Big (Laopala) , Bowl Small(Laopala) , Brass Chain (Good Quality) , Brass Tub (For Flower) 12” , Brass Tub (For Flower) 14” , Brick , Brick , Broom Stick , Brown Cades (Ajanta) , Brown Target Paper (4’X4’) , Brush For Painting(3 Inch) , Brush For Painting(4 Inch) , Brush Holder , Cutter Machine Blade (Grinder) , Cutter Machine (Grinder) , China Nail 1.5 , China Nail 2 , China Shadle 20Mm , China Shadle 6Mm , Chisel 6 , Chitkani Alluminium 4, 6 , Chitkani Iron 4, 6 , Chopper (01 Ft) , Citronella 100 Ml , Clamp For Pvc Pipe , Cloth Clip , Commode (Hindware) , Coir Foot Mat 24 X 48 , Coir Foot Mat 12 X 36 , Carrum Board Stand G.I Pipe , Carbon For Drill Machine , Car Portable Fire Extinguisher , Car Perfume With Machine , Car Freshener , Car Duster , Camouflage Vest , Comfort 1 Letter , Cane Lathi 3 , Cane Busket , Carbolicacid 100 Ml , Casarol (Cello) 5 Ltrs , Curpet Jute , Carpet Nylon , Carrom Board 48 Good Quality , Carrom Board 52 Good Quality , Cement (Ambuja) -50 Kgs. Bag , Cement Piller 6 Ft. , Ceremonial Dress- (Hackle, Komor Bandh, Jhalar, Neck Bandh, Anklet, Leather Belt) , Lance 8 Ft. , Ceremonial Pagri , Chaki & Belna , Chalk-Pencil , Clip , Clip Board , Coal –Tar , Coasters , Coir String , Colinspray -500 Ml , Compas , Connector Pipe , Corner Flag (Best Quality) , Corner Self 8”X 8” , Corrugate Sheet2.5’X10’(Jindal) , Corrugate Sheet2.5’X12’ (Jindal) , Cordless Calling Bell Remote Battery , Cordless Calling Bell (Havells) , Cordless Microphone Battery , Cow Dung , Cricket Bat Duse , Cricket Bat Tennis , Cricket Elbow Guard (Ss) , Cricket Helmet Duse (Ss) , Cricket Pads (Ss) , Cricket Thigh Guard (Ss) , Cricket Wicket , Curpet Nylon (Belgium) , Curtain Pipe 2/3 Dia , Curtain Best Quality , Curtain Medium Quality , Curtain With All Equipment , Face Mask (Sergical) , Face Mask (Cloth) , Drum Stick , Drum For Police Band 28 , Drum For Police Band 22 , Drill Bit Set , Iron , Drill Bit Set , Wooden , Drill Bit Set , Concrete , Door Skin 4 X 7 , Drum Belt 22 , Door Hasbolt (Isi) , Door Handle Lock (Godrej) , Display Board (4 X 5) , Discuss Plate , Dinner Spoon Steel , Diathin 500 Gm. , Diamond Blade , Daw (Cutter) , D.A.P Fertilizer , Dendrite 100 Gm , Dettol Liquid -500 Ml , Dettol Liquid Hand Wash 200 Ml , Dettol Soap -75 Gm. , Dinner Set (Laopala) , Dinner Plate (Laopala), Full Plate , Dinner Plate (Laopala), Halfplate , Dinner Set Big Size(Laopala) , Discus -1 Kg (Nelco) , Discus -2 Kg (Nelco) , Door Chitkeni , Door Closer (Isi) , Door Handle , Door Kabja , Door Matcoir , Door Mat Iron Net , Door Mat Synthetic , Door Reparing With All Fitting , Drain Brush , Drain Brush With Lathi 6 , Drill Machine Set , Dustbin Plastic Big Size , Duster , Electric Welding Machine (Portable) , Electric Portable Spray Painting Machine , Electric Jhalai Rod (Steel) , Electric Jhalai Rod (Iron) , Electric Toster (Big Size) , Eb Alto Saxophone , Ear Plug , Earthenflower Tub (14) , Ezee 500 Ml , Dettol Hand Sanitizer 60 Ml , Dettol Hand Sanitizer 05 Letter Jar , Emari Paper , Empty Cement Bag , Empty Oil Dram 200 Ltrs. , Exhaust Fan (Havels) Medium Size , Exhaust Fan (Havels) Small Size , Flute Trumped (Bansi) For Band , Flower Tub (Cement) , Flower Stand With Flower ( Artificial) , First Aid Kit (Oxum Spray , Bandage 2 , Micropore Tape 1 , Band Aid 5 Pc , Volini Spray 15 Gm. ) , Fevicol/Ddl , Fire Extinguisher Bucket , Figuer 11 Target Paper .38 Revolver , Fire Extinguisher Bucket Stand (Iron) , Fire Extinguisher Cylender , First-Aid Box With All Equipments , Flag Rope (Cotton) , Flush Cock (Corsa) , Flask (Milton) Thermo Steel Carafe -1500 , Flask (Milton) Thermo Steel Carafe -1000 , Floor Tiels ( Best Quality) , Floor Tiles ( Vetrified) New Suppling And Fitting , Floor Wiper(Best Quality) , Floor Wipersponj (Best Quality) , Flower Vass (Best Quality) , Foot Ball (Cosco, Atlanta) Size-5 , Foot Ball (Cosco,Milano) Size-5 , Foot Ball Boot (Rahul) , Foot Ball Hose , Foot Ball Net Nylon , Freshmatic Automatic Spray (Air Wick) 250 Ml , Phooljharu , Funnel(Plastic) Big , Funnel(Plastic) Medium , Ground Sheet ( Satranji) 24 / 30 Ft , Ground Sheet ( Satranji) 18/24 Ft , Glucometer , Gloves Fire (Extinguisher Rubber) , Gloves For Sweeper , Gloves For Goal Keeper , Gas Oven Regulator , Gas Oven Hose Pipe , Gas Oven (18 X 18) , Gas Oven (12 X 12) , G.I. Bucket (Tata) 10 , G.I. Bucket (Tata) 12 , G.I. Bucket (Tata) 14 , G.I. Nouka / Rice Tub , G.I. Pipejoin Socket 2” , G.I. Pipe 1Dia (Tata) , G.I. Pipe 1.5Dia (Tata) , G.I. Pipe 2Dia (Tata) , G.I. Pipe 2.5 Dia(Tata) , G.I. Pipe 3 Dia(Tata) , G.I. Pipe Join Socket 1.5”Dia (Tata) , Gaita (Tata) , Gamaxin Power , Garbage Bags (Big Size) , Gardenumbrella - Standard Size , Garden Scissor , Glucose- 150 Gm , Good Knight Liquidator , Good Knight Liquidator Machine , Grass Brush , Grass Cutter Machine , Grey Paper , Ground Decoration Flag (Aney Collour) , Half Pant (Black) , Half Pant (White) , Hit Spray Red 400 Ml. , Hit Spray Black 400 Ml. , Hawkins Pressure Cooker 20 Ltr. , Hawkins Pressure Cooker 10 Ltr. , Hammer 02 Kg. , Hammer 200 Gm. , Hammer 100 Gm. , Hacksaw Blade (Double Head) Bipco , Hacksawblade(Isi) , Hacksaw Frame (Isi) , Hammer Iron 5 Kg , Hammer Wooden , Hand Shower (Jaquar) , Hand Towel (Bombay Dying) , Handel Wooden For Gita , Hanger (Best Quality) , Harpic- 500 Ml , Hand Gloves Cotton Full , Hassian Cloth , Hasua –Medium , Hand Held Scarch Light (Dragon Type) , Helmate Repairing With Painting , Hot - Pot Big Size (Cello) , Hot- Pot (Milton) 4 Bati , Iron Hook 4 , Iron Grill , Iron Brush Without Handle 6 , Inverter 850W (Microtech) , Induction Cooker (Prestige, 2000 Watt.) , Induction Cooker , Induction Cooker (Havels Insta Cook-Stx, 2000 Watt.) , Iron Angle (Tata) All Kinds , Iron Banti , Iron Brush , Iron Chanta , Iron Chimta , Iron Cot Paint , Iron Cot Repair With Paint , Iron Hamal-Dista (Medium) , Iron Hata (Medium) , Iron Karai (Medium) , Iron Khunti , Iron Khurpi , Iron Korai (Tata) , Iron Peg For Tent Complete , Targetfor Practice Firing 4’X4’ With Stand (Rifle) , Iron Tawa , Immers Rod , Judo Mat , Javelin, Metal (Nelco) , Jet Pump 1 H.P With All Fitting Articles (Kriloskar/Compton Greaves) , Jhul Jharu , Jute , Kurl-On (Mattress) 6 X 7 , Kurl-On (Mattress) 5 X 7 , Kurl-On (Mattress) 3 X 5 , Kural , Khurpi , Khurni , Khanjani Big Size , Kabja With Screw 2/4/6 , Khunja (Earthen) , Large Screw Driver (Taparia) , Lal Saloo , Ladder Aluminium ( 8 Size) , Lawn Movers (Joy Bharat) , Lawn Tennisracket (Head, Model No-Metalix) , Lawn Tennis Ball (Head, Model-Champainship) , Lawn Tennis Net With Accessries (Spotiva Tennis Net) , Lawn Tennis Racket (Head, Model-No-Pct Ti Two) , Letterpancha-Z (Small) , Letter Pancha-Z (Big) , Lifebuoy Handwash (215 Ml.) , Loud Hailer (Ahuja) , Lime Dust (Mahabir) , Lime Stone(Mahabir) , Lyzol -500 Ml , Lyzol -1L , Lock With Key (Godrej)-6-Lever , Lock With Key (Godrej)-7-Lever , Lock With Key (Godrej)-8-Lever , Mosquito Net (Best Quality) Single Bed , Mosquito Net (Best Quality) Double Bed , Mixer Grinder Best Quality , 750W , Mirror With Back Side Ply (18 X 24 ) , Mirror With Back Side Ply (18 X 60 ) , Mike Complete Set Ahuja , Microphone Cord With Jack 8 Approx , Micro Oven Samsung 21 Ltr. , Mess Tin (Alluminium) , Macheti Anti Grass (500 Ml.) , Measurement Stand, Hight 8 Ft (Olimpia) , Measurement Tape 5 Ft , Measuring Tape (15 Mtrs) , Measuring Tape (30 Mtrs.) , Measuring Tape (50 Mtrs.) , Microwavable 1.7 Ltrs. Mixingbowl (Borosil) , Microwavable 2.5 Ltrs. Mixingbowl (Borosil) , Micro Oven Glass Bowl, Big (Borosil) , Micro Oven Glass Bowl, Medium (Borosil) , Micro Oven (Model-Samsung-73 Adb) , Mike Stand (Ahuja, Dgn) , Mirror (Best Queality) , Mixture Fertilizer , Mixture Glinder (Bajaj) , Mixture Glinder (Philips - Hl 1643/04, 600 Watt.) , Good Knight Coil , Mosquito Protect Net (Best Quelity) , Moulded Chair With Out Handel(Supreme) , Moulded Chair With Handel (Supreme) , Moulded Table (Supreme) , Muratic Acid 500 Ml. , Neosporin , National Flag (2X3) Khadi , National Flag (2X3) Silk , National Flag (4X6)Silk , National Flag (4X6) Khadi , National Flag Rope , Number Punch 0-9(Big) , Number Punch 0-9(Small) , Putting , Pvc Tarpauline 10 X 10 , Pvc Tarpauline 20 X 20 , Polythene Sheet 18 X 24 Best Quality , Polythene Sheet 18 X 18 Best Quality , Polythine Pipe 3/4 (Hindi) , Polymer Door (3 X 6.5) , Plus Taparia (10) , Plus Taparia (8) , Plastic Sheet (Best Quality) 7 X 3 , Plastic Mug (Cello) , Plastic Jhuri (Basket) , Plastic Bucket 20 Ltr (Cello) , Plastic Bucket 16 Ltr (Cello) , Plaster Paris , Plastic Table Cloth , Plank Lamp - Pati All Size , Plank Gamari All Size , Pillow Kurl-On , Palmet Curtain Bracket , Palmet Clip , Paint J&N All Colours , Pvc Floor Mat , Pumper , Plastic Sheet (Good Quality Black ) 8 X 10 , Over Head Shower With Ring , Odomos , Odonil , Olympic Torch (Best Quality) , Ors -100 Gm , Paint Black (Asian) , Paint Blue (Asian) , Paint Brown (Asian) , Paint Blue, Wheather Coat (Asian) , Paint Sky Blue (Asian) , Paint Green (Asian) , Paint Primer (Asian) , Paint Red (Asian) , Paint Silver Oxide/Aluminium (Asian) , Paint Terracotta, Wheather Coat (Berger) , Paint White (Asian) , Paint White ,Wheather Coat (Asian) , Paint Yellow (Asian) , Patching Paper , Piller Cock (Jaquar) , Pillow (Good Quality) , Pillow Cover (Bombay Dying) , Plastic Bucket (14) , Plastic Bucket (16) , Plastic Gamla (20 Ltrs.) , Plastic Jug , Plastic Mug Big Size , Plastic Tea Table (Supreme) , Polythin Pipe (Water Transfer) 100 , Potash , Pressure Cooker (Hawkins) -5 Ltrs. , Projector Screen , Pvc Ring , Pitambari 100 Gm. , Ruller For Colour , Rucksack , Rope Nylon Thick , Room Heater Blower (Bajaj) , Room Heater (Bajaj) Single Coil , Room Heater (Bajaj) Double Coil , Room Freshiner (Godrej) , Rifle Cleaning Oil , Revolver Figure Target Paper (Head) , Revolver Figure Target Paper (Body) , Reed Eb Alto Saxophone , Reed Bd Clarinet (Reco 3 1/2) , Rack (Wooden) A.K.-47 , Rack (Wooden) S.L.R , Rat Killer (Mortein) , Red Oxide , Revolver Full Target Paper 4’X4’ , Rice Light , Rogger 250 Ml. , Ropefor Tag Of War/ Monkey Rope , Rope Nylon 10 Mm , Rin Ala Liquid 500Ml , Round Cover , Swimming Costume , Sunmica Sheet , Sufala Fertilizer , Stop Watch Digital , Steel Curtain Bracket , Steel Cahin (4Mm X 4.56) , Steel Cahin (4Mm X 5) , Spoon With Spoon Stand , Small Umbrella , Skipping Rope , Sofa (Triple Seat) Steel , Sofa (Single Seat) Steel , Seris Paper For Iron & Wood , Sanitizer 100 Ml , Sand , Sand , Sandwich Meker (Morphy-Richards-Sm 3001,750W) , Saucepanwith Lid (Vinod, 1.5 Ltrs. ) , Saucepanwith Lid (Vinod, 3 Ltrs. ) , Saxophone Reed , Softic Halmet With Visor , Softic Halmet , Scotch Brite , Service Protector , Shaval , Shot Put -16 Pound (Nelco) , Shower (Jaquar) , Shuttel Cock (Mousumi, Association No -1) , Side Dram Synthetic Cover (Small Size) , Side Dram Synthetic Cover (Big Size) , Sil And Nora (Small) , Sil And Nora (Big) , Sink (Still) 16”/18”/20”/22” , Sink Cock , Spade (Tata), With Handle , Spade Handle , Spray Machine ( 16 Ltrs) , Sprinkler , Stainer 100 Ml , Steel Bati (Medium) , Steel Bati Plate (Medium) , Steel Dabu Hata , Steel Frok , Steel Gamla (Medium) , Steel Glass , Steel Handi (Medium) , Steel Jhanjra , Steel Jug , Steel Khunti , Steel Pan Spoon , Steel Panja Hata , Steel Pipe For Contingent Flag Bearer , Steel Plate , Steel Sabji Dani , Steel Dustbin (Mediun) , Steel Spoon , Steel Thala , Steel Water Drum (With Tap) 50 Ltr. , Stone Chips , Stop Watch (Racer) , Stove Kerosine (Tata) , Surf Excel Blue (500 Gm) , Surf Excel Bar 250 Gm , Sutli , Syntex Pvc Door , Track Suit Set Best Quality , Towel Big(Bombay Daying) , Tea Table Steel With Glass , Table Cloth Blue / Merun (6 X 4) , Table Cloth (Ordinary) , Table Glass 10 Mm (Best Quality) , Table Glass 12 Mm (Best Quality) , Table Glass 6 Mm (Best Quality) , Table Glass 8 Mm(Best Quality) , Target Paper 4 X 4 , Tea Table Wooden 2’X3’ , Tarpelt (Tata) , Tarpin Oil , Tea Container (Thermoflax Steel Body) , Tea Spoon Steel , Tea Cup With Plate (Laopala) , Tea Set (Bone China) , Table Wooden 3’X 2’ , Tennis Ball (Sixer) , Three Way Bib Cock , Tissue Paper , Tiffin Carier 3 Box (Milton) , Toaster (Bajaj Majesty Atx-9, Auto Pop Toaster, 800 W) , Toilet Brush (Wooden) , T -Flag (Both Side Embroidery) , Towel Handle (Best Quality) , T -Flag Silk (Different Colour) , Towel Rod 18” , Towel Rod 24” , Towel Stand , Towel White (Primium) , Tray (Best Quality) , Trey Melamine (Serve Well) , Tuli 0 To 5 Size , Urinal Complete Set (Best Quality) , Urinal Complete Set (Ordinary) , Ujala -100 Ml , Umbrella - Standard Size , Unit Flag (3 X 2 ) Silken , Unit Flag (6 X 4 ) Silken , Unit Flag With Logo & Embrodery Work (2’X3’) , Unit Flag With Logo & Embrodery Work (4’X6’) , Urea , Urinal Pan (Hindustan) , Use Me With Padle (Dustbin) Medium Size , Use Me Without Padle (Dustbin) Medium Size , Volini Spray , Vip Tray (Fibre) , Vinyl Board With Sticker , Velvet , Vest With Collour (Any Collour)-Full Sleeved , Vest With Collour (Any Collour)-Half Sleeved , Vim Liquid-250 Ml , Vimbar Soap -300 Gms. , Vinyl Flooring , Volley Ball (Cosco, Aclean ) , Volley Ball (Cosco, Super Volley) , Volley Ball (Nivia) , Volley Ball Net Nylone (Falcon) , Window Net Nylon Complete Setting , White Pt Vest (Best Quality) , White Canvas Shoes (Khadim / Elite) , White T-Shirt Half (Best Quality) , White T-Shirt Full (Best Quality) , Water Pump 1.5 Hp (Crompton) , Water Heater Connector Pipe , Water Drum Plastic With Lid 50 Ltrs , Water Drum Plastic With Lid 80 Ltrs , Water Drum Plastic With Lid 120 Ltrs , Water Container With Tap , Wall- Clock Ajanta , Wall Bit , Wall Hangar (Plastic) , Wall Hangar (Steel) , Wall Putty (20 Kgs. Bag) , Wall Tiles New Supplying And Fitting , Washing Brush (Cloth) , Water Drum (Pvc) 100 Ltrs. , Water Drum (G.I.) 100 Ltr. , Water Drum (G.I.) 200 Ltr. , Water Purifier 08 Letter (Kent) , Water Glass(Borosil) , Water Jhari- 5 Ltr. , Water Tank (1000 Ltrs)Sintex , Water Tank (500 Ltrs)Sintex , Water Tank (750 Ltrs) Sintex , Weight Machine (Digital) , Whitetable Cloth , White Board 3 X 4 , White Board Stand , White Cades (Ajanta) , White Cement- 50 Kg (Acc) , White Cloth (4’X5’) , White Cotton Bed Sheet (5’X7’) , White Phenyle (Cross) , White Shocks -(Anchor) , Window Repairing With All Fitings , Woodenhigh Bench1.5’X9’ (9 Ft) , Wooden Ladder 10 , Wooden Ladder 20 , Wooden Table (3’X4’) , Wooden Low Bench1.5’ X 9’(9 Ft) , Yoga Mat , Nonlit Board Fabricationalong With Flex Printing Without Structure , Nonlit Board Fabrication And Installation Along With Flex Printing With Iron Structure , Glow Sign Board Fabrication Along With Flex Printing Without Structure , Glow Sign Board Fabrication And Installation Along With Flex Printing With Iron Structure , Flex Printing For Glow Sign Board , Flex Printing For Nonlit Board , Flex Change (Without Flex Printing)Choke, Strarter & Wire , Flex Change (Without Flex Printing) , Sandwich Clip , 2 X 2 Angle , 1.5 X1.5 Angel , 1X 1 Angel , 2 X 2 Angle , 2.5 X 2.5 Angle , Ply Wood 2Mm , Ply Wood 6Mm , Ply Wood 8 Mm , Ply Wood 12 Mm , Ply Wood 4Mm , Brass Ball 1’ , Ball Valve , Ball Valve Handle , Elbow“R”1”X1/2” , G.I “ T”1’ X 1/2’ , G.I “R”Socket1’ X 3/4” , G.I “T” 1’ , G.I Elbow ½” , G.I Elbow 1’ , G.I Elbow¾” , G.I Nipple ½”X2” , G.I Nipple1”X2”X3”X4” , G.I Pipe ½” , G.I Thed 1’X6’ , G.I Union¾” , G.I Union1’ , Hole Tite , Hook¾ , Pvc 80 Cdh Pipe1” , Pvc Pipe 1/2 , Pvc Pipe 1 , Pvc Pipe 3/4 , Pvc Pipe 1.5 , Pvc Pipe 2 , Pvc Elbow 1/2 , Pvc Elbow 1 , Pvc Elbow 3/4 , Pvc Elbow 1.25 , Pvc Elbow 1.5 , Pvc Elbow 2 , Pvc Tee 1/2 , Pvc Tee 1 , Pvc Tee 3/4 , Pvc Tee 1.25 , Pvc Tee 2 , Pvc Union 1/2 , Pvc Union 1 , Pvc Union 3/4 , Pvc Union 1.25 , Pvc Union 2 , Pvc Claim , Gate Valve 25 Mm(Isi) , Gate Valve 10 Mm (Isi) , Foot Valve 25 Mm (Isi) , Foot Valve 10 Mm (Isi) , Jum Nut (Isi) , ‘J’Type Hook (Isi) , Nut Washer 1Inch , G.I. Socket 1 , G.I. Socket 1/2 , G.I. Socket 3/4 , G.I. Elbow 4 X 1/2 , G.I. Nipple 9 , G.I. Nipple 12 , G.I. Nipple 18 , G.I. Nipple 3/4 , G.I. T 3/4 X 1/2 , G.I. T 3/4 , G.I. T 1/2 , G.I. R Socket 1/2 X 3/4 , Anglow Stop Cock 1/2 , Solven , Tank Nipple , Bush , Welding Rod (Iron) , Welding Rod (Brass) , Fevicol Heatx , Fevicol Addisive , Door Stoper With Magnetic , Jersey For Football (Best Quality) , Jersey For Cricket (Best Quality) , Trophy For Winner (Best Quality) , Trophy For Runner (Best Quality) , Mementoes (Best Quality) , Trophy For Man Of The Match/Series (Best Quality) , Jersey(Cotton) With Printing , Jersey(Cotton) With Out Printing , Water Bottle , Ac Starter Set (Havels) , Bedswitch (Anchor) , Black Tape(Big Size) , Bulb 100 Watt (Philips) , Bulb 200 Watt (Philips) , Bulb 60 Watt (Philips) , Bulb Buttam Holder , Bulb Holder Angel (Anchor) , Bulb Holder Pendent (Anchor) , C.F. L. Lamp -11 Watt (Philips) , C.F. L. Lamp -5 Watt (Philips) , C.F. L. Lamp -8 Watt (Philips) , C.F. L. Lamp -14 Watt (Philips) , C.F. L. Lamp -18 Watt (Philips) , C.F. L. Lamp -23 Watt (Philips) , C.F.L. Lamp -32 Watt (Philips) , Led 09 Watt (Philips) , Led 12 Watt (Philips) , Led 15 Watt (Philips) , Led 45 Watt (Philips) , Cable4 Mm -2 Core ((Havels) , Cable6 Mm - 4 Core ((Havels) , Cashinggang Box -3 Way , Cashing Gang Box -2 Way , Cashing Gang Box -4 Way , Cashing Gang Box -5 Way , Cashing Gang Box -6 Way , Cashing Gang Box -8 Way , Casing1/2 , Casing3/4 , Ceiling Fan (Oriant)Size-48 , Ceiling Fan (Usha) Size-48 , Ceiling Rose (Anchor) , Ceilling Hanging Light , Change Over 63 Amp 4 Pole (Havels) , Change Over - 32 Amp (Anchor) , Cord Less Calling Bell (Havels) , Codenser For Fan , Calling Bell With Cord (Philips) , Calling Bell Without Cord (Philips) , Cover2 Model (Cabtree) , Cut Out -10 Amp (Anchor) , D.P Main Switch32 Amp (Anchor) , Dalda Pipe , Earthin Pipe , Earthin Rod , Earthin Wire , Elbowl (Pvc) , Elbowt (Pvc) , Electric Iron (Bajaj) , Emergency Light With All Equipments (Sigma) , Extension Board , Fan Hook , Flexible Wire (Star Line) , Fuse- 5 Amp (Anchor) , Fuse-63 Amp (Jj) , Full Thred Screw , G.Ishaddle 1/2 , G.I. Wire , Globlight Set (Best Quality) , Halogen Holder -1000 Watt(Philips) , Halogen Holder- 500 Watt(Philips) , Hellogen- 1000Watt Glass (Philips) , Hellogen- 1000 Wattfilament (Philips) , Hellogen 500 Wattfilament (Philips) , Hellogen- 500 Wattglass(Philips) , Hellogen Light Complete Set 500 Watt (Philips) , Indicator Lamp , Rechargeable Battery For Hhmd , Led Tube Light Complete Set 20 Watt(Havels) , Main Switch63 Amp (Havels) , Main Switchchange Over63 Amp (Havels) , Main Switch 32 Amp (Jj) , Main Switch 16 Amp (Jj) , Main Switch 63 Amp Tpn (Hpl) , Male - Female (Jj) , Mcb Box (Different Type) , Mcb Switch -10Amp (Havels) Singel Pole , Mcb Switch -16Amp (Havels) Singel Pole , Mcb Switch -32Amp (Havels) Singel Pole , Mcb Switch-63Amp (Havels) Singel Pole , Nail , Night Bulb (Philips) , P.V.C. Multigagewire -.75 Mm(Havels) , P.V.C. Multigagewire -1 Mm(Havels) , P.V.C. Multigagewire- 1.5 Mm(Havels) , P.V.C. Multigagewire -2.5 Mm (Havels) , P.V.C. Multigagewire- 4Mm(Havels) , P.V.C. Multigagewire -6Mm(Havels) , P.V.C. Multigagewire -8 Mm(Havels) , Pedestal Fan(Havels)Size-16 , Pedestal Fan(Usha)Size-16 , Pedestal Fan(Orient)Size-16 , Pliers (Taparia) , Pvc Gujji , Regulator For Fan (Usha) , Rise Light Led , Pixel Light Led , Pixel Led Smps , Pixel Led Controller , S. S Combined Set (Anchor) With Box , Screw (1) , Screw (1.5) , Screw (2) , Screw (3”/4) , Socket - 5 Pin (Anchor) , Socket 15 Amp (Cabtree) , Socket 3 Pin (Anchor) , Socket 5 Amp (Cabtree) , Socket Piano -15 Amp (Havels) , Socket Piano- 5 Amp (Havels) , Socket Type Regulator (Anchor) , Socket Type Regulator (Cabtree) , Stabiliser 250 Watt (Neutron) , Starter (Cabtree) , Steel Saddle , Search Light (Rechargeable) , Strep Light Led With Adaptor , Switch 15 Amp (Anchor) , Switch 5 Amp (Anchor) , Switch 5 Amp (Cabtree) , Switch Type Regulator (Anchor) , Single Pole Mcb 32 Amp(Havels) , Top 2 Pin (Jj) , Top 3 Pin (Jj) , Top 15 Amp (Havels) , Top 5 Amp (Havels) , Top -5 Pin (Jj) , Tube Light Buttom , Tube Light Choke (Circuit) Havels , Tube Light Choke (Philips) , Tube Light Clamp , Tube Light Complete Set 28 Watt 4’(Havels) , Tube Light Complete Set 20 Watt (Havells) , Tube Light Lamp Yellow (Philips) 36 Watt. , Tube Light Holder , Tube Light Lamp- T-5 (Havels) , Tube Light Lamp (Havells) 36 Watt. , Tube Light Lamp 28 Watt(Havels) , Tube Light Starter (Philips) , Tube Light Complete Set 2 X 36 Fitting Box Type , Two Pin Plug (Jj) , Vapour Lampignator 250 W (Philips) , Vapour Lamp Bulb 400 Watt (Havels) , Vapour Lamp Choke 250 Watt (Philips) , Vapour Lamp Choke 400Watt (Havels) , Vapour Lamp Complete Set 250 Watt (Havels) , Vapour Lamp Complete Set 400 Watt (Havels) , Vapour Lamp Condencer 250 Watt(Philips) , Vapour Lamp Condencer 400 Watt(Havels) , Wall Catch Light Set (Havels) , Wire -2 Core (Starline) , Wodden Gujji , Wooden Biscuit (Sunmica)

Contract Date: May 30, 2025 Contract Value : ₹ 1.40 Crore

Statutory Bodies & Commissions/Committees No of Bidders 4

West Bengal View Result →

Defence #11060497 AOC

Bids Are Invited For Custom Bid For Services - Fabrication Of New Storage Unit For 21 Bassca Set And Fabrication Heavy Duty Metal Hanger

Contract Date: Ref. Documents Contract Value : ₹ 1.49 Lakh

Government Departments No of Bidders 4

Goa View Result →

10.

Power #11054117 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Assam View Result →

11.

Power #10900203 AOC

Bids Are Invited For Round The Clock Up-Keeping And Maintenance Of Turbine And Its Auxiliaries Of 9,10 And 11 - Round The Clock Up Keeping And Maintenance Of Turbine And Its Auxiliaries & Round The Clock Up-Keeping And Maintenance Of Boiler Feed Pumps, Condensate Pumps And Other Small Pumps Of Unit 9,10 And 11. One Job Means Round The Clock In All Three Shifts Per Day For One Month For Three Units , Changing Of Gasket Of Esv , Chng.Transfer Pipe Gasket Of Hpc Flange Or Ipc Flange , Complete Oh Of Control Valve Of Hpc Or Ipc Or Changing Of Valves , Complete Oh Of Barring Gear. , Open Cover Of T.G. Brg 1 Or 2 Or 3 Or 4 , Chng. Brg Of Roller Of Cont Valve Hpc , Insp And Rect Of Fault Of Turbine Brg 1 Or 2 Or 3 , Insp And Rect Of Fault Of Turbine Brg 4 Or 5 , Insp And Rect Of Fault Of Turbine Brg 6 Or 7 , Chng. Of Bush In Control Valve. , Re-Visioning Of Cam Shaft Of Hpc Or Ipc , Re-Visioning Of Cont Valve Column Of Hpc Or Ipc , Chng Thrust Or Surge Pad Of Brg No. 2 , Re-Visioning Of E.G.P.V. , Cleaning And Check Of Lkg Of Oil Clr Of Tur , Alignment Of Motor Of Barring Gear. , Chng. Of Thrust Brg Or Gear Coupling Of Mop , Oh Of Pilot Of Servo Motor Of Esv Or Iv. , Replacement Of Lpc Diaphragm. , Complete Oh Of Cvsm. , Complete Oh Of Servomotor Of E.S.V Or I.V. , Re-Visioning Of Other Pilot Valves. , Cleaning Of Filters Of Main Oil Tank , Oh Of Feedback Pilot Valve Of Cvsm , Removing Barring Gear For Diff, Exp. , Rep Of Def Oil Seal Or Brg Of Barring Gear. , Rep Of Def Pinion Brg. Of Barring Gear. , Oh Of Main Ejector Or Attending Leakage , Checking Of Tube Leakage Of Condenser , Cleaning Of Condenser , Patch Welding In L.P. Pipe Up To 50 Mm Or Cut And Weld For Joint Of L.P. Pipe51 To 100 Mm , Patch Welding In L.P. Pipe Above 100 Mm Or Fab Of Bend From L.P. Pipe51 To 100 Mm , Fab Of Bend From L.P. Pipeup To 50 Mm Or Cut And Weld For Joint Of L.P. Pipe101 To 150 Mm , Fab Of Bend From L.P. Pipe101 To 150 Mm , Fab Of Bend From L.P. Pipe151 To 200 Mm , Fabrication Of Bend Size- 25 To 50Mm , Cut And Weld For Joint Of L.P.Pipe Upto 50Mm Or Fabrication Of Bend Size- 51To 60Mm , Cut And Weld For Joint Of L.P.Pipe151 To 200Mm , Attend Flange Or Bonnet Lkg Of Hp Valve Or Hp Pipe Upto50 , Attend Flange Or Bonnet Lkg Of Hp Valve Or Hp Pipe 51 To 100 , Attend Flange Or Bonnet Lkg Of Hp Valve Or Hp Pipe101 To 150 , Attend Flange Or Bonnet Lkg Of Hp Valve Or Hp Pipe151 To 200 , Oh Of By Pass Valve Of Temp Control Line Or Patch Welding Work In The Condenser Or Hot Tightening Of Ejector , Clean Of Filter Of Tur Oil Or H2 Cooler Str , Oh Of Main Steam Line Valve I.E. V2 6 , Oh Of Feed Line Valve With By Pass Valve , Oh Of Nrv Of Extraction Line, Es-1 Or Es-2 Or Ipt Transfer Pipe Line Drain Valve , Oh Of Nrv Of Extraction Line,Es-8 Or Es-11 Or Oh Of Nrv Of Hp Drip Or Cep Disch Line , Oh Of Valve Cont.To Cond Dw-4 Or 38- 41 Or Ca-5 Or As-47 Or As-48 Valve , Oh Of Stm Throw Valve To Cond Or Iso Lph-2 , Oh Of Steam By Pass Valve V2-27 Or 15 Or V2-7 , Oh Of Extrac Valve I.E. Es-3 Or 4 Or 5 Or 6 Or 7 Or Oh Of Drip Line Gate Valve Hd-21Or 29 Or 30 Or 31 , Oh Of Fcnrv Or Isolating Valveof Lph-3 Or 4. , Oh Of Condensate Throw Off Valve To Cond , Rep Of Es-9 By H.P Welding Tech, , Rep Of V2-27 Or 15 By H.P Welding Tech, , Rep Of V2-38 Or 81-84 By H.P Welding Tech, , Oh Of Actuators Of Msv-L Or R , Oh Of Actuators Of Dw-4 Or 38- 41 Or Ca-5 Or Cst Makeup Valve Or Es-3 To7 Or Hd-21 Or Hd-29 To 31 Or As 47 Or 48 , Oh Of Actrs Of V2-38 Or 81-84 Or 27 Or 15 Or V2-7 Or Steam Iso Valve Lph-3 Or 4 , Oh Of Actrs Of Butterfly Valve , Oh And Re-Visioning Of Lph-2 To Lph-4 Or Gc-I Or Gc-Ii Or Lph-1A Or Lph-1B , Oh Of Gauge Glass Of Lph Or Gc Or Ejc Or Dea O Rcon , Tight. Of Flange Of Crh Or Gc-I Or Ii Or Lph , Overhauling Of Dss Of Aux., Prds-Ii , Overhauling Of Main Flash Tank , Overhauling Of Aux Flash Tank , Repair Or Replacement Of Broken Hanger. , Tightening Of Loose Hangers. , Attend The Flange Leakage Of Crh Line. , Serv Of Hydr. Brake Of Chit Or Gar Crane , Chk And Grs. Of Brg,Cplg,Chang Bush Of Bolt Or Serv Of Greep Brake Of Chit Or Garlic Crane Or Sevicing Servicing Of All The Wheel Of Garlic Or Chitram Crane And Plate - Chk And Grs. Of Brg,Cplg,Chang Bush Of Bolt Or Serv Of Greep Brake Of Chit Or Garlic Crane Or Sevicing Servicing Of All The Wheel Of Garlic/Chitram Crane And Plate , Oh Of Small Hook Of Chit Or Garlic Crane Or Oh Main Hook , Serv.Of All Gear Boxes Of Chit Or Gar Crane , Check And Clean Of Wire Rope Drum Or Bearing , Oh Of Dss Of Aux. Prds , Cut And Weld And Repl Of Lp Valve Up To 50 Mm , Cut And Weld And Rep Of L.P. Valve51 To 100Mm , Cut And Weld And Rep Of L.P.Valve101 To 150Mm , Oh Of Isolating Or Bypass Valve Of Pcv 5 Or 14 Or 17 , Oh Of Valve Contd To Dea At 13 Mtr V2-21 Or Cst Makup Valve , Oh Of Suc Valve Of Bfp Or Disch Valve Of Cep , Oh Of Suction Valve Of Cep Or Mc-18-25 Or 33 Or 37 Or Oh Of U Bend Valve , Fab Of Reducer For Hp Drip 218-80 Or 168-80 , Rep Of Reducer Of H.P Drip Line , Lph Drain Line Valve Hd-8 Or 9 Or 14-19 Or 20 , Check And Rect Of Internal Fault Of Dea , Blanking Of Crh Line For Reheater Ht , Rem Chocking Oil Drain Of Brg1 Or 2 Of Tur. , Rem Chocking Of Drain Of Cntg. Machine. , Repl Of Damaged Nrv Of Pcv-14 Or 17 Size200 , Repl Of Damaged Nrvof Feed Line Size-250 , Oh Of Butterfly Valve Of Condenser , Hot Tightening Of Cross Over Pipe , Oh Of Hp Heater And Attend Of Flange Lkg. , Attending The Shell Joint Of Hph , Attend The Spot Lkg Of Hph Shell Joint. , Oh Of Safety Valve Of Flange Or Stud Heatng Or Lp Heater Or Hp Heater Or Cbd Tank , Oh Of Safety Valve Of Warm Up Line , Oh Of Safety Valve Of Aux Prds Or Deaerator Or Oh Of Nrv Of Aux Rpds Heat Line To Fst , Oh Of Nrv V2-52 Or V2-53 Or V2-80 , Oh Of Nrv Of Re-Circulation Line Of Bfp Or Spindle Leak Off Line , Oh Of H.P. Valve And Nrv. , Oh Of H.P. Steam Drain Line Valve. , Rep Of Nrv Of Hph Drip To Deaerator , Welding Of Crack In Hph Or Crh Pipe Line , Fab Of Bend For Re-Circulation Line Or Oh Of Group Protection Valve I.E. Fw-1 , Fab Of Bend For Hph Drip Line Con To Dea , Fab Of Bend Of Lph Drip To Drip Pump Or Condenser , Rep Of Bend Of Hph Drip Line Con To Dea , Rep Of Bend Of Rc Line Con To Dea Or Oh Of Feed Pump Energy Absorber. , Rep Of Bend Of Lph Drip To Drip Pump Or Condenser , Cutting And Welding Of H.P. Valve 15 To 50Mm , Cutting And Welding Of H.P.Valve 51 To 100Mm , Cutting And Welding Of H.P.Valve101 To 300Mm Or Oh Of Pcv 10 , Rem Of Chocking Of Shell Or Coil Drn Of Hph , Ohof Lcv3-12 Or 15 Or Pcv5 Or 14 Or 16 Or 17 Tcv8 Or 10-12 , Cut Or Weld Of Joint Of H.P. Pipe15 To 50Mm , Cut Or Weld Of Joint Of H.P. Pipe51 To100mm , Fab Of Bend 63.5 X 5.5Mm With Jacketing , Overhauling Of L.P. Valve Or Lp Nrv , Overhauling Of Lp By Pass Valve. , Overhauling Of Hp By Pass Valve. , Overhauling Of Hp Or Lp By Pass Spray Valve , Changing Of Mech. Seal Bfp Booster Pumps De Or Nde , Re-Visioning And Checking Of Working Oil Or Lube Oil Cooler , Re-Visioning And Tube Leakage Sw , Re-Visioning And Checking Bcw Or Swc , Replacement Of Inside Stator Assy , Inspection Or Rectification Of Fault Of Bfp Nde Or De Bearing , Rectification Of Fault Of Bfp Motor Nde Or De Bearings , Complete Oh Of Drip Pump , Oh Of Cw Booster Pump Or H2 Gas Cooling Pump , Alignment Of Motor Of Cw Booster , Re-Adjustment Of Bearing , Inspection Of Fault Of Drip Pump , Overhauling Of Bcw Or Hw Or Sw Or Swc Pump , Overhauling Of Phosphate Dosing Pump , Oh Of Hydrazine Pumps Or Re-Visioning Of Suction Filter , Re-Visioning Of Thrustpad Of Bfp , Alignment Of B.F.P. With Hydraulic Cplg , Shifting Of Condensate Pump Without Modification , Shifting Of Condensate Pump2 With Modification , Fabrication Of Compensator Suction , Fitting Of Compensator In Suction Line , Inspection Of Fault Of Cep Bearing , Complete Overhauling Of Cep , Cleaning Of Strainer Of Cond. Pumps. , Replacement Of Bfp Lo Or Wo Or Sw Cooler , Overhauling Of Air Washer Blower , Overhauling Of Air Washer Pump , Tanks Cleaning , Cleaning Of Working Oil Cooler Of Bfp , Cleaning Of Lub Oil Cooler Of Bfp , Matching Of Thrust Collar , Replacement Of Aop Oil Seal , Replacement Of Damaged Coupling Bush , Replacement Of Damage Nipple Of Bfp , Priming Of Aop Or Attending Oil Leakage , Changing Of Plunger , Filling Gland In Phosphate Or Hydrazene , Cleaning Of Cooling Oil Line , Removal Of Chocking Of Bcw Line Of Cep , Cleaning Of Make Up Oil Storage Tank , Replacement Of Damage Flange , Alignment Of Motor Of Air Washer Pump Or Fan Or Sop , Alignment Of Ac Or Dc Lub Oil Pump , Replacement Of Bearing Of Hydr Coupling , Complete Oh Of Hydraulic Coupling , Replacement Or Re-Visioning Of Mop Or Aop , Revisioning And Checking Of Control Block Scoop Tube , Cleaning Of Cooling Line Of B.F.P.B Pu Or Drip Pumps , Re-Visioning And Checking Of Wire Mesh , Overhauling Of Boiler Feed Pump Upto Balancing Disc , Changing Of Mech. Seal Of Bfp-S.S , Changing Of Mech. Seal Of Bfp-D.E , Oh Of Boiler Feed Booster Pump , Alignment Of Motor Of Boiler Feed Booster , Alignment Of Motor Of Drip Pump , Alignment Of Motor Of H2 , Alignment Of Motor Of B.C.W. Or Hw Or Swc Or Sw Pump , Rectification Of Fault Of Bearings Of Bfp Booster , Oh Of Centrifuging Mc Pump , Straightening Of Condensate Pump Shaft , Replacement Of Drip Pump , Cleaning Of Filter Of Aop , Decoupling And Coupling Of Motor Of Cep Or Attending Gland Leakage Of Cep , Attending Gland Leakage Of Drip Pump , Cleaning Of Filters Of Phosphate Or Hydrazene , Replacement Of Damage Coupling Of Aop Or Cleaning Of Suction Filter Of Air Washer , Rectification Of Foundation Base Or Rectification Of Coupling Of Small Pump , Alignment Of Hydraulic Coupling , Re-Visioning Of Seal Water Cooler , Oh Of Osu Of Hp Or Lp System , Clean Of Bcw Cooing Line Of Bfp Bstr Or Chang Labyrinth Seal Of Bfp Motor Brg , Trans Of Spares From Csd To S Store Of Tmd-I , Loading And Unloding And Transp Of Material Of Tmd-Ii , Round The Clock Routine And Preventive Maintenance Works Of Turbine And Its Auxiliaries Of Unit No. 12, 13 And Cw Pump Total Quantity : 92218

Contract Date: Ref. Documents Contract Value : ₹ 2.65 Crore

Boards / Undertakings / PSU No of Bidders 2

Uttar Pradesh View Result →

12.

Public Administrative Department #10894424 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Uttar Pradesh View Result →

13.

Drinking Water Supply and Sanitation #10838420 Price Bid

Tender for Fabrication Supply And Testing Of New Hangers For Stop Logs As Per Existing At Wazirabad Barrage.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Delhi View Result →

14.

Housing Urban and Rular Development #10831693 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Daman And Diu View Result →

15.

Power #10782777 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 4

Uttar Pradesh View Result →

16.

Housing Urban and Rular Development #10778154 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 4

Uttar Pradesh View Result →

17.

Communications and Information Technology #10712723 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Jammu And Kashmir View Result →

18.

Power #10617202 Price Bid

Mtps I Mill Plant Unit I Dismantling Patch Welding And Assembling Of Mill Outlet Elbows Orifices Transition Pieces Fabrication Of Spool Piece Multiple Port Outlets And Rectification Of Hanger Support Etc

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 2

Tamil Nadu View Result →

19.

Health and Family Welfare #10611417 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 9

West Bengal View Result →

20.

Rural Development #10579130 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

21.

Rural Development #10579078 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

22.

Power #10551387 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Uttar Pradesh View Result →

23.

Power #10551384 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Uttar Pradesh View Result →

24.

Health and Family Welfare #10520394 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

West Bengal View Result →

25.

Rural Development #10501963 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

26.

Rural Development #10501960 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

27.

Rural Development #10501956 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

28.

Rural Development #10501838 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

29.

Housing Urban and Rular Development #10495581 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Uttar Pradesh View Result →

30.

Shipping #10481218 Price Bid

Appointment Of Agency For Conceptualization, Designing, Fabrication And Installation Of New Mangalore Port Authority Exhibition Stall In Exhibition Hanger At The Venue Of Global Maritime India Summit 2023 To Be Held From 17Th To 19Th October 2023

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 5

Maharashtra View Result →

31.

Housing Urban and Rular Development #10452608 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Rajasthan View Result →

32.

Public Administrative Department #10441258 Price Bid

Fanicial Year 2021-22 Material Supply For Mgnrega In Gp Sankra Fanicial Year 2021-22 Material Supply In Gp Sankra , Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. 2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. 3 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 4 Earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr. and lift up to 1.5 Mtr. disposed soil to be levelled and neatly dressed:All kinds of soil 5 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 6 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 7 Brick masonry with F.P.S. bricks of class designation 75 infoundation and plinth with bricks 8 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 4 (1 cement : 4 coarse sand) 9 Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish :20mm thick 10 Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish :20mm thick . 11 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 12 Finishing with neat cement (punning). 13 Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4,with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge 14 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 15 Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes.For parking shed 16 Supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size. 17 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. 18 Providing and fixing cow catcher made of R.S. joist angles channels MS rounds including cutting welding and fabrication with priming coat of red oxide (as per design). Gate 3 Nos. 19 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 20 Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumeseel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm shets be casted with regular modified plyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate at made at to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and foe a minimum up to 12mts with all scaffolding. 21 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). 22 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : 23 Providing and fixing designer cement concrete polished tiles over 20mm average thick base of CM 1 :4 (1 Cement : 4 sand) jointing with cement mortar 1 :2 ( 1cement : 2 sand) with pigment to match the shade of the tiles complete with all respect. 24 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete including painting etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge). 25 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. 26 Hoisting Charges for each floor :For items 2.26.5 to 2.26.8 27 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 28 50mm dia nominal bore B Class 29 25mm dia nominal bore B Class 30 15mm dia nominal bore B Class 31 Making connection of G.I. distribution branch with G.I. main including all fitting. 32 Upto 25mm dia 33 Beyond 25mm & upto 100mm dia 34 P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality:50mm nominal bore. Vertical 35 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : 36 Gun-metal 50mm nominal bore. 37 Gun-metal 25mm nominal bore. 38 Gun-metal 15mm nominal bore. 39 P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : 40 Brass wt. Not less than 300 gm,15mm. 41 (-do-) wt.Not less than 600 gm, 25mm. 42 P & F Push Cock superiorquality, of approved makeC.P. Brass 15 mm. 43 Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : 44 50mm dia nominal bore 45 25mm dia nominal bore 46 15mm dia nominal bore 47 Providing and fixing M.S. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 48 Supplying and fixing machine cut fine dressedRed/Pink sand stone dasa orcoping,with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade. 75 mm thick 49 Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete 50 Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 51 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Old work (One or more coats ) 52 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure A:30 mm thick . 53 Extra for providing external lipping with 2ndclass teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. 54 Providing& fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade : 55 Providing and fixing fully panelled/partly panelled/double leaf shutter frame for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - A and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete : 56 Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick8 mm thick glass 57 Extra for providing IS 1341-1992marked Stainless Steel butt hinges instead of black enamelled M.S. butt hinges with necessary screws. (Shutter area to be measured). 58 Extra for providing other type of fittings as mention in annexure A ( as approved by EI) :Brass fittings 59 Providing and applyingMelamine polish on teak wood work of approved brand and manufacture to give an even shade with twoor more coats by compressor including sand papering,wood filler coat etc complete in all respect: 60 Carriage of Building Rubbish Stone metal (Grit and ballast etc.)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Rajasthan View Result →

33.

Heavy Industries and Public Enterprises #10390733 AOC

Contract Date: Jul 17, 2025 Contract Value : ₹ 11.48 Crore

Boards / Undertakings / PSU No of Bidders 1

Kerala View Result →

34.

Agriculture #10366973 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Uttar Pradesh View Result →

35.

Public Administrative Department #10363312 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Rajasthan View Result →

36.

Public Administrative Department #10348518 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Gujarat View Result →

37.

Public Administrative Department #10327235 Price Bid

E -Tender For The Furnishing Work At Ernakulam- 1 e -Tender for the furnishing work at ErnakulamFor more details refer tender documents 2 12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board50cm. 3 Providing and fixing partition using 12.5 mm thick tapered edge gypsum moisture resistant board up to ceiling height (upto 360cm) consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick Moisture Resistant Board 4 12.52.4 Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick fully Perforated Gypsum Board tile made from plaster board having glass fibre conforming to IS: 2095 Part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with centre borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side , having as NRC ( Noise Reduction Co efficient) of 0.79, with 50 mm resin bonded glass wool backing. 5 26.22.1 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. 6 15.7.4Demolishing brick work manually / by mechanical means including stacking of serviceable material anddisposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.Incement mortar 7 15.3Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. 8 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 9 13.43.1Applying one coat of water thinnable cement primer of approved brand and manufacture on wall/ceilingsurface: Water thinnable cement primer 10 13.60.1Wall/ceiling painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Twoor more coats on new work 11 13.80Providing and applying white cement-based putty of average thickness 1 mm, of approved brand andmanufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 12 13.45.1 Finishing walls with textured exterior paint of required shade:New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 13 Toughened Glass Partition Providirig and fixing 12mm Thick Clear toughened Glassy using Dorma patch fittings, all complete as per architectural drawings and the directions of Engineer 14 Toughened glass door :Providing fixing door of 12mm thick Toughened glass door ( Saint gobain) with Dorma/ozone) patch fiiitngs ( floor spring,Top patch ,pivot Pin ,Bottom patch ,Corner 15 ReceptionWall, Conference room& CEO room WallPaneling for the existing surfaces to be made out of 16 mm thick marine plywood framework /aluminum section frame work backing covered with 9/12 mm thick 303 grade marine ply wood finished with approved 1.0mm thk laminateincluding skirting & band at top in the same alignment with a groove and including molding of approved size as shown in detailed drawing or as directed by Architect 16 Wooden wall partition-wall partition behind the reception area by using 6mm and 9mm thick bwr plywood laminated with veneer with approved design and pattern 17 Interior landscaping Providing 25mm to35mm white marble pebbles stone, round polished white pebble with plants 18 Window Blinds:Providing and fixing window blinds on each window including cost & conveyance all materials & labour etc. Except pantry area 19 Wall paper:- Providing & fixing wall paper, of approved shade & design,basic price to be minimum Rs1200/- per sq.m finished complete asdirected. 20 Sticker work : Applying&Fixingetchingstickerforaglass partition & Glass Door including all Materials & Labour Charges 21 Workstations: Fabrication, supply and installation at office type modular workstations ; Leg and beam desk system of following specification and size. Table top: 18mm thick MDF and 2mm edge banding finish, access flapwire manager: Understructure: Made of ERW tubular structure of size 50x50mm 1.6 mm thick powder coated with suitable levelers; power beam for integrated wire management, raceways, Raceway:Data and power with provision for sockets/data below table top [20.01 to 22.01]4 seater workstationCross model (2400 x 2400 x 750 H) 22 6 seater work station discussion Table(2400 x 1200 x 750 H) 23 2 seater workstation (2400 x 600 x 750 H) 24 L Shaped executive table of size (1800 x 900 x 750 H + 900 x 400 x 750 H )with storages & drawers with lock ,keyboard drawer using 18mm thick MDF with 1 mm lamination and 2mm edge banding finish, includingcost & conveyance all materials & labour etc 25 Reception Table (3500 x 600 x 750 H) with side storage (900 x 450 x 750 H) Providing & Fixing Reception Table as per design and size. Made up of 16 mm thick 303 grade bwr marine plywood with 1 mm lamination and 2mm edge banding finish 26 CEO Table (2400 x 1200 x 750 H) with side storage (1000 x 400 x 750 H) Providing & Fixing CEO Table as per design and size .Made up of 18mm thick 303 bwr grade marine plywood with 1 mm lamination and 2mm edge banding finish 27 Meeting table (3600 x 1200 x 750 H ) : Laminate finish Table top made of 18mm thick pre laminated mdf with 1 mm laminationfinishchamphered edge having matching shade of edge banding. Table top to have aluminum finish flip top and provision to fix power and data inside a dual layered fixed tray under the table top. To be inclusive of under table top mountedadjustable size and cable manager of full extended table height length. Either table Legs shall be made from MS50 micron powder coated Legs assembled together MS Powder coated plate at topor the vertical support shall be provided with 18 mm Prelaminated mdf as per the design.The base support plate is having provision for wire entry and glide fixing. The wire carrying is facilitated through the hollow space between two leg extrusions and the wires are concealed between removable rigid PVC extrusion in the leg . 28 Conference Table:Size : 9000mm L x 1400 mm D x 750mm Ht. Laminate finish Table top made of 18mm thick pre laminated mdf with 1 mm laminationfinishchamphered edge having matching shade of edgebanding. Table top to have aluminum finish flip top and provision to fix power and data inside a dual layered fixed tray under the table top. To be inclusive of undertable top mountedadjustable size and cable manager of full extended table height length. Either table Legs shall be made from MS50 micron powder coated Legs assembeled together MS Powder coated plate at topor the vertical support shall be provided with 18 mm Prelaminated mdf as per the design . The base support is having provision for wire entry and glide fixing. The wire carrying is facilitated through the hollow space between two leg extrusions and the wires are concealed between removable rigid PVC extrusion in the leg . 29 Hi backchairs for CEO & conference table with ergonomic design, good lumbar support, seating comfort, Seat with high density PU foam upholstered with approved quality fire retardant fabric, Hydrualic gas lifting mechanism, Tilt locking mechanism, fixed armrest with integral PU skin metal inserted arm rests, five pronged chrome base with nylon castors.(for CEO) 30 Hi backExecutive chairs for officers with ergonomic design, good lumbar support, seating comfort, Seat with high density PU foam upholstered with approved quality fire retardant fabric, Hydrualic gas lifting mechanism, Tilt locking mechanism, fixed armrest with integral PU skin metal inserted arm rests, five pronged chrome base with nylon castors.(for cabin) 31 Medium back mesh chairs for conferance table, with ergonomic design, good lumbar support, seating comfort, Seat with high density PU foam upholstered with approved quality fire retardant fabric, Hydrualic gas lifting mechanism, fixed armrest with integral PU skin metal inserted arm rests, five pronged chrome base with nylon castors. 32 Medium back task mesh chairs for workstationswith ergonomic design, good lumbar support, seating comfort, Seat with high density PU foam upholstered with approved quality fire retardant fabric, mesh back, Hydrualic gas lifting mechanism,fixed armrest with integral PU skin metal inserted arm rests, five pronged chrome base with nylon castors. 33 Metal type leg VisitorschairFixed armrest withFabric Seat ,Large chrome plated heavy duty metal base Cantilever base Stylish black nylon mesh/cushioned backrest 34 Plant box1200 x 300 x 750 H :15mm multiwood with PU paint finish 35 2 seater visitors sofausing good quality timber with Comfort Level - Medium Form andHigh Quality 230 GSM Polyester Fabric good quality fabrics 36 Discussion Table with 2 nos fabric couch 37 Discussion Table with 3 nos fabric couch 38 Flush door : Providing and fixing 30 mm thicklaminated flush door shutters conforming to Idecorative type, core of block board construction with frame of I st class hard wood and well matched mica on both faces of shutters.including Stainless Steel butt hinges ,handle ,lock with necessary screws etc 39 Modular pantry unit using high quality 710 Gurjen prelaminated plywood including storages, tracks, drawersincludingcost & conveyance all materials & labour etc. 40 Storage unit of approved make of following size made of 12/18mm thick Pre laminated medium density fiber board for vertical and horizontals and intermediate shelves. The openable door shutters shall be provided with SS handles, locks, auto closing hinges and necessary hardwares etc; complete. The exposed edges shall be finished with 2mm thick PVC lippingSize : 750cm L x 210cm H x 400cm D 41 Wash counter storage unitof approved make of following size made of 16 mm thick both sides plywoodboards for vertical and horizontals and intermediate shelves. The openable door shutters shall be provided with SS handles, locks, auto closing hinges and necessary hardwares etc; complete. The exposed edges shall be finished with 2mm thick PVC lipping 42 Granite topProviding and fixing 12 mm thick granite with edge moldingExtra for providing opening or required size & shapefor wash basin/kitchen sink pantry-1.98 sqmwash counter - 0.63 sqm 43 Pedestal Storage: made of 18mm pre- laminated MDF. All exposed edges lipped with 2mm or 0.8mm edge band. One Pull out drawer and one shutter door Considered.Size: 500H X 420D X 400 W mm 44 6 Watt LED ceiling lightInstallation, Testing and Commissioning of 6 W, Surface / Recess mounted LED Dowlight Luminaire including driver complete asrequired. Brand - Wipro /Philps 45 3 Watt LED ceiling light Installation, Testing and Commissioning of 3 W, Surface / Recess mounted LED Dowlight Luminaire including driver complete asrequired. Brand - Wipro /Philps 46 LED Strip Light : Installation, Testing and Commissioning of Linear LED Strip-lights(15 Watt /Metre) for installing in False-ceiling Coves together withrequisite driver etc. complete as required. with 2 years Warrantyagainst any manufacturing defect working under standardelectrical condition. 47 Supply and installation of Interactive display unit with accessories: of size 86 in built Intel core i5 8gb 512 with windows10th or 11 with two year warranty Display parameter: ADS/1897(H)x1068(V)/16:9/450cd/M2/1400:1/6˜8ms/DLED/178 (V) 178(h)/3840(h)x2160(v)20Wx2 sound track2.0 /amlogic T982 quad core a55x4.19ghz /mil G52mp2Android space: Android 11.0/ram 4 GB/Rom32GB/version 5.0 /frequency 2.4Ghz distance 0.10mWarless Module: Version 802.11ac.b/g/n/a/ax/frequency 2.4Ghz/5Ghz,distance -0-10mHDMI in -/USB2.01/usb 3.0 1/touch usb 2.2 1/audio in 1/audio out 1/i/o interface : coaxial output 1/Earphone 1/RS232 1/RJ45 1/3” usb 3.0+type +c+touch out+HDMI in window cpu-intel i3/i5/i7/system version-win 10pro/11pro/internal storage -4Gb/8GB/16Gb/32GB/OPS computer -HDD-ssd-128/256/512Gb/Graphics -integrated/wifi-yes/PC interface-VGA x HDMI x wifi xLAN x lcommic-in lan LINE OUT USB 2.0 5USB 3.0I/power dissipation -440w standby consumption 0.5w/power suppy-100-240v-50/60Hz4AOthers : VESA Hole specification -800x400mm/wall mounting screws spec -M8x25mm/net weight -70kg/Touch screen-Teach technology -Non contact infrared sensing technology/writing height-3mm/bounding 0 boundingAccessories- writing display-Double stylus pen two color/wall brocket -1pc/touch pen-1pc/power cable-1pc/operation manual-1Environmental – working temperature -0.40cParameters- storage temperature-20+60c/working life-time -60000hrs 48 Blue Star/voltas or equilant Make Ceiling Mounted Duct ableUnitSupply of Blue Star/ voltas or equilant make 4 TR Inverter Cassette Split air conditioner 1PH Model AC with cordless remote (ID336TANU1) FullCopper Mode 49 Supply of Blue Star /voltas or equilant make Air-cooled Concealed Split air conditioner with nominal capacity 1.5TR Fitted with Rotary compressor and Microcontroller panel 50 LOW SIDE 1 [49.01 to 51.01]1. Installation, Testing & Commissioninga. 4TR Cassette Installation, Testing &Commissioning 51 b. Copper refrigerant piping interconnecting the condensing unit to evaporating unit 52 c. Installation, testing and commissioning of the entire system after necessary leaktest,Vaccumazing and charging 53 LOW SIDE 22. Supply & erection of GSS Ducting (Supply Air) 22G 54 LOW SIDE 3Supply and installation of Supply & Return AirGrills control damper 55 LOW SIDE 4Supply and installation of Supply & Return AirGrills control damper 56 LOW SIDE 5Supports for duct and machine (Slotted anglethreaded rod etc..) 57 LOW SIDE 6ODU Stand for Cassette condensing units. 58 LOW SIDE 7Machine Supporting rubber pads as vibrationisolators 59 LOW SIDE 8Drain water piping, 32mm PVC with RubberSleeve insulation. 60 LOW SIDE 9Canvass connection 61 LOW SIDE 10ODUStandfor1.5TRcondensingunits

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Kerala View Result →

38.

Civil Aviation #10292373 Price Bid

Tender For Up gradation Of Low Side Hvac System At Amritsar Airport.; 1 Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal air handling unit (for chilled water centralised AC plant) made of 25 mm thick panels consisting of pre plasctized G.I. casing of thickness 0.8 mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection moulding machine, complete with blower section with blower suitable for static pressure as required, minimum 2 bend GSS/PVC eliminators, cooling coil section with aluminium finned copper tubes (tube thickness not less than 0.5 mm) cooling coil of following row deep, filter section with 50 mm thick metal viscous/ washable synthetic type air prefilters, belt drive package with TEFC drive motor of efficiency class IE 3 suitable for 415 ± 10 % volts, 50 Hz , 3 Phase AC supply suitably designed for variable frequency drive applications, drain connections, stainless steel (18 G) drain pan with PUF insulation, 150 mm dia. dial type pressure guages (2 nos.) and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. complete as per specifications and of following capacities. 2 40900 CFM (8 Row deep) 3 39300 CFM (8 Row deep) 4 30950 CFM (8 Row deep) 5 29623 CFM (8 Row deep) 6 35000 CFM (6 Row deep) 7 31700 CFM (6 Row deep) 8 31500 CFM (6 Row deep) 9 30700 CFM (6 Row deep) 10 23700 CFM (6 Row deep) 11 18500 CFM (6 Row deep) 12 12000 CFM (6 Row deep) 13 5000 CFM (6 Row deep) 14 Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type Vertical type air handling unit (for chilled water centralized AC plant) made of 43± 2 mm thick panels consisting of Pre-coated G.I. Sheet casing of thickness 0.6 mm outside layer and 0.6 mm inside layer with polyurethane foam (PUF) insulation factory injected between them by injection molding machine with 40±2 kg /M³ of density , complete with blower section with blower suitable for static pressure as required, cooling coil section with aluminum finned copper tubes (tube thickness not less than 0.41 mm) cooling coil of following row deep, filter section with 50 mm thick metal viscous/ washable synthetic type Pre filters having efficiency 90% down to 10 micron, belt drive package with TEFC drive motor of efficiency class IE 3 suitable for 415 ± 10 % volts, 50 Hz , 3 Phase AC supply suitably designed for variable frequency drive applications, drain connections, stainless steel (18 G) drain pan with PUF insulation, vibration isolation arrangement etc. complete as per specifications and of following capacities.AHU Coil shall be AHRI Certified. Bidder has to submit the AHRI certificate along with technical data sheet approval. AHU Motor & blower shall be compatible to operate with VFD.Outlet velocity of air should not be more than 9.26 m/s.The Face velocity ofcoils should not be more than 500 . AHU should have protection like LimitSwitch, Door Lamp, Inspection Glass etc. 15 10000 CFM (6 Row deep) Vertical 16 Supply, installation, balancing and commissioning of fabricated at site/factory GSS sheet metal rectangular/roundducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 17 Thickness 0.63 mm sheet 18 Thickness 0.80 mm sheet 19 Thickness 1.00 mm sheet 20 Thickness 1.25 mm sheet 21 Supply, fixing, testing and commissioning of following insulated valves as per specification 22 Butterfly valve (Manual) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilledwater/hot eater circulation as specified. 23 32 mm dia. 24 65 mm dia. 25 80 mm dia. 26 100 mm dia. 27 Balancing valve with built in measuring facility with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. 28 32 mm dia. 29 65 mm dia. 30 80 mm dia. 31 100 mm dia. 32 3 way motorized valve, CI body, brass seating, S.S 304 spindle, spring loaded packing with teflon rings and rubber seal, PN-16 rating and flange end connection max temperature 90°C with 24V AC/DC linear motion electric actuator, IP-64 rated. 33 32 mm dia. 34 65 mm dia. 35 80 mm dia. 36 100 mm dia. 37 Y - Strainer of ductile CI Body flanged ends with stainless steel strainer for chilled/ hot water circulation including insulation as specified. 38 32 mm dia. 39 65 mm dia. 40 80 mm dia. 41 100 mm dia. 42 Supplying, fixing, testing and commissioning of fire dampers in supply air duct / main branch and return air path as and where required of required sizes i/c control wiring. The damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as requried and as per specifications. 43 Fire damper 44 Actuator 45 Supply & Fixing of new waterproof/fire retardant canvass connection for new AHUs complete with GI frame and hardware. 46 SITC of 15mm Automatic Air purge valve. 47 SITC of 15mm Ball Valve. 48 SITC of Dial type pressure gauge along with the syphon tube and ball cock. 49 SITC of mercury-in glass thermometer. 50 Supply and Installation testing of Digital thermostat for AHUs Temperature control. 51 Supply, laying , connecting , fixingand testing of Chilled water MS ERW class C pipe complete with all fitting duly insulated as mentioned their in for closed cell elastomeric insulation 30 to 40 kg /cum density& 26 G Aluminum cladding laidunderground/flooretccompleteallasspecifiedanddirectedforthe following pipes : - 52 150 mm -32 mm thick insulation 53 125 mm -32 mm thick insulation 54 100 mm -25 mm thick insulation 55 80 mm -25 mm thick insulation 56 65 mm -25 mm thick insulation 57 32 mm-25 mm thick insulation 58 Supply,layingandfixingofdrainpipeofGITubingMediumgradewithall fittingsforcableprotectionlaidintrenchesorfixedtowall/laidinflooring, complete all as specified and directed. 59 25 mm 60 32 mm 61 Supply & Fixing of closedcellelastomericnitrilerubberhavingthermalconductivitynot exceeding0.037W/mKatmeantemperatureof20°CasperEN12667, moisturediffusionresistancefactoror‘µ’valueofminimum7,000forbase insulation material without the foil as per EN 12086, fire performance such that it passes Class O as per BS476 Part 7 for surface spread of flame , density without the foil between 40 to 55 kg/cum. The insulation material shall be dust & fibre free. The Aluminum foil shall be 60 microns thick and its weight shall be 193 gsm as per EN ISO 2286-2, tensile strength 90 N / 15 mm as per EN ISO 527-3withelongation>10%asperENISO527-3,completeforfollowing thickness of insulation all as specified and directed. 62 19 mm thick thermal insulation 63 Supply,Installation, TestingandCommissioning ofAcousticlininginside ducts/plenum using open cell nitrile rubber foam having micro-ban anti- microbial/ anti fungal product protection and of 160-180 kg / m³ density as per ASTM D3575, class 1 rating As per BS476,PART-7, cut to required sizes and tobestucktotheinsideofductsurfaceswithadhesiveasapprovedbythe manufacturer. (Rubber based solvent). as per specifications 64 10mm thick sound board 65 Supply,installation,testingandcommissioningofGIvolumecontrolduct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. 66 SITC of Aluminum Construction Supply air grill with aluminum VCD 67 SITC of Aluminum Construction Return air grill without VCD 68 Supplying,fixingtestingcommissioningofAluminumSupplyairdiffusersof powder coated with aluminum volume control dampers with anti smudge ring & removable core. 69 Supplying,fixingtestingcommissioningofAluminum Returnairdiffusersof powdercoatedwithoutvolumecontroldamperswithantismudgering& removable core. 70 Supplying,installation,testingandcommissioningof 300 mmdiaJetdiffuser with volume control dampers for supply air as per specifications,complete all as specified and directed. 71 Supplying, fixing, testing and commissioning of powder coated extruded aluminumsection freshairgrillinweathermakerroomwithvolumecontrol dampers complete as required as per site condition. 72 Supply, fabrication, installation and testing of flexible connection constructed of fire resistant double resin sleeve as per approved shop drawings and specifications, complete all as specified and directed. 73 SITC of Aluminum Construction damper for existing grill 74 SITCofAirbalancingof AHUforproperAirflowthroughNADCAcertified Agency VendorhastosubmittheReport&NADCAcertificateofagency before starting of work. 75 AHU No 1 - 39300 CFM 76 AHU No 2 - 29623 CFM 77 AHU No 3 - 23 700 CFM 78 AHU No 4 & 5 - 30700 CFM 79 AHU No 6 - 31500 CFM 80 AHU No 7 - 40900 CFM 81 AHU No 8 - 30950 CFM 82 AHU No 9 & 10- 35000 CFM 83 AHU No 11 - 18500 CFM 84 AHU No 12 & 13 - 12000 CFM 85 AHU No11 - 31700 CFM 86 AHU No 13 - 5000 CFM 87 Robotic Duct Cleaning :Removing refixing and cleaning of inside surface of supply & return air ducts, grills & diffusers of HVAC system by busing high power vacuum having HEPA filter, air compressor,robotic camera, air hammer, special nozzles,air sweep with all other required accessories and inspection of duct duct before and after cleaningusingcolourvideominimumat4placeineachAHUandmopping withtherecommendedchemicaldisinfectantsuchasKorsole/Microbac forte Sokrena or Equivalent inside the surface if supply air duct.Note:AllthecleaningworkshouldbecarriedoutbyNADCAcertified approvedagencyonly.ContractorhastosubmittheNADCAcertificateof agency before starting ofexecution activity.Mode of Measurement : Mode Of Measurement : Carpet area of Air conditioning space, AHU room and the area where duct is fixed . 88 Supply and laying of 3 c x 1.5 Sqmm PVC insulated flexible control cable . 89 SITC of wall mountable LT panel made of 1.6 mm thick mild steel CRCA steel confirming to IP 43 having suitable size of Al. Bus bars suitable for 3 Phase , 4 wire , 50 Hz AC supply system with following switchgear and accessories –Incomer :(i) 80 A, 415 V, Ics = Icu = 25 kA, 50 Hz FP MCCB with adjustableoverload settings,adjustableshort-circuitsettingsandThermalMagneticbasedtrip. Incomer have one multifunction meter along with Indicating light.Outgoing :(i) AHU starter shallbe design with VFD (matching with AHU motor capacity . Suggested>22kwto<=30KW) ofcapacityasperapprovedTDSofAHU motor with bypass starter arrangement.Thereshould be Auto manual selector switch for VFD & by pass starter along withindicatinglightpushbuttononoff & ManualVFDFrequencycontrol switch/Regulator to control the VFD speed manually.(ii)6AMPDPMCBwithcontactor,toggleswitch,indicatinglightshallbe provided for 3 way valve & Fire Damper Actuator/Humidifier- 3 nos. 90 SITC of wall mountable LT panel made of 1.6 mm thick mild steel CRCA steel confirming to IP 43 having suitable size of Al. Bus bars suitable for 3 Phase , 4 wire , 50 Hz AC supply system with following switchgear and accessories –Incomer :(i) 63 A, 415 V, Ics = Icu = 25 kA, 50 Hz FP MCCB with adjustableoverload settings,adjustableshort-circuitsettingsandThermalMagneticbasedtrip. Incomer have one multifunction meter along with Indicating light.Outgoing :(i) AHU starter shallbe design with VFD ( matching with AHU motor capacity . Suggested>15kwto<=22KW) ofcapacityasperapprovedTDSofAHU motor with bypass starter arrangement.Thereshould be Auto manual selector switch for VFD & by pass starter along withindicatinglightpushbuttononoff & ManualVFDFrequencycontrol switch/Regulator to control the VFD speed manually.(ii)6AMPDPMCBwithcontactor,toggleswitch,indicatinglightshallbe provided for 3 way valve & Fire Damper Actuator/Humidifier- 3 nos. 91 SITC of wall mountable LT panel made of 1.6 mm thick mild steel CRCA steel confirming to IP 43 having suitable size of Al. Bus bars suitable for 3 Phase , 4 wire , 50 Hz AC supply system with following switchgear and accessories –Incomer :(i) 63 A, 415 V, Ics = Icu = 25 kA, 50 Hz FP MCCB with adjustableoverload settings,adjustableshort-circuitsettingsandThermalMagneticbasedtrip. Incomer have one multifunction meter along with Indicating light.Outgoing :(i) AHU starter shallbe design with VFD ( matching with AHU motor capacity . Suggested>7.5kwto<=15KW) ofcapacityasperapprovedTDSofAHU motor with bypass starter arrangement.Thereshould be Auto manual selector switch for VFD & by pass starter along withindicatinglightpushbuttononoff & ManualVFDFrequencycontrol switch/Regulator to control the VFD speed manually.(ii)6AMPDPMCBwithcontactor,toggleswitch,indicatinglightshallbe provided for 3 way valve & Fire Damper Actuator/Humidifier- 3 nos. 92 SITC of wall mountable LT panel made of 1.6 mm thick mild steel CRCA steel confirming to IP 43 having suitable size of Al. Bus bars suitable for 3 Phase , 4 wire , 50 Hz AC supply system with following switchgear and accessories –(i) 32 A, 415 V, Ics = Icu = 16 kA, 50 Hz FP MCCB with adjustableoverload settings,adjustableshort-circuitsettingsandThermalMagneticbasedtrip. Incomer have one multifunction meter along with Indicating light.Outgoing :(i) AHU starter shallbe design with VFD ( matching with AHU motor capacity . Suggested>3.7kwto <=7.5KW) of capacityas perapprovedTDS of AHU motor with bypass starter arrangement.Thereshould be Auto manual selector switch for VFD & by pass starter along withindicatinglightpushbuttononoff & ManualVFDFrequencycontrol switch/Regulator to control the VFD speed manually.(ii)6AMPDPMCBwithcontactor,toggleswitch,indicatinglightshallbe provided for 3 way valve & Fire Damper Actuator/Humidifier- 3 nos. 93 SITC of wall mountable LT panel made of 1.6 mm thick mild steel CRCA steel confirming to IP 43 having suitable size of Al. Bus bars suitable for 3 Phase , 4 wire , 50 Hz AC supply system with following switchgear and accessories –Incomer :(i) 16 A, 415 V, Ics = Icu = 10 kA, 50 Hz FP MCCB with adjustableoverload settings,adjustableshort-circuitsettingsandThermalMagneticbasedtrip. Incomer have one multifunction meter along with Indicating light.Outgoing :(i) AHU starter shallbe design with VFD ( matching with AHU motor capacity . Suggested <=3.7 KW) of capacity as per approved TDS of AHU motor with bypass starter arrangement.Thereshould be Auto manual selector switch for VFD & by pass starter along withindicatinglightpushbuttononoff & ManualVFDFrequencycontrol switch/Regulator to control the VFD speed manually.(ii)6AMPDPMCBwithcontactor,toggleswitch,indicatinglightshallbe provided for 3 way valve & Fire Damper Actuator/Humidifier- 3 nos. 94 Supplying & installing following sizes of perforated Galavanised Iron cable tray with perforation more than 17.5 % in convenient sections, joined with connectors,suspendedfrom ceilingwithGI suspendersincludingGI Bolts& nuts etc. as required 95 300 mm x50mm x 1.6mm 96 100 mmX 50 mm X 1.6 mm 97 SITC of MS iron for support including one coat of red oxide & one coat of black paint . 98 SITC of GI strip of size 25 mm x 3 mm as earth lead fixed to wall on batten or recess or chases or buried in ground or drawn in cable tray for loop earthing etc complete all as specified and directed. 99 Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing as required. 100 Dismantling of existing AHU of following CFM and shifting the dismantled material to AAI stores as directed by EIC. 101 29000 CFM 102 24500 CFM 103 23000 CFM 104 19167 CFM 105 18500 CFM 106 13530 CFM 107 12000 CFM 108 Supply of following sqmm, 1.1 KV grade, XLPE insulated, PVC sheathed, armoured, aluminum conductor power cable conform to IS 7098 (part -1) with up to date amendments etc complete as required. 109 4 C x 10 sqmm 110 4 C x 6 sqmm 111 3.5 C x 35 sqmm 112 3.5 C x 25 sqmm 113 3 C x 35 sqmm 114 3 C x 25 sqmm 115 3 C x 10 sqmm 116 3 C x 4 sqmm 117 Supply of 4 C x 4 sqmm, 1.1 KV grade, XLPE insulated, PVC sheathed, armoured, copper conductor power cable conform to IS 7098 (part -1) with up to date amendments etc complete as required. 118 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface/existing cable tray as required. - upto 35 Sq. mm. 119 Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE Al. conductor cable of 1.1 kV grade as required. 120 4 C x 10 sqmm (25 mm) 121 4 C x 6 sqmm (25 mm) 122 3.5 C x 35 sqmm (32 mm) 123 3.5 C x 25 sqmm (28 mm) 124 3 C x 35 sqmm (28 mm) 125 3 C x 25 sqmm (25 mm) 126 3 C x 10 sqmm (22 mm) 127 3 C x 4 sqmm (22 mm) 128 Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’insulation applied by suitable rubber based adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect. 129 Chilled water piping of nominal size - 200mm dia. (32mm thick nitrile rubber) 130 Chilled water piping of nominal size - 150mm dia. (32mm thick nitrile rubber) 131 Chilled water piping of nominal size - 100mm dia. (32mm thick nitrile rubber) 132 Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping in ground (with necessary fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class ‘O’insulation applied by suitable rubber based adhesive complete including exavation & providing cement concrete blocks as supports,etc. as per specifications and as required complete in all respect 133 Chilled water piping of nominal size - 200mm dia. (32mm thick nitrile rubber) 134 Chilled water piping of nominal size - 150mm dia. (32mm thick nitrile rubber) 135 Supplying and fixing aluminium sheet cladding on 200mm dia. (32mm thick nitrile rubber) ofchilled water piping complete as per specifications and as required complete in all respect. 136 Supplying and fixing aluminium sheet cladding on 150mm dia. (32mm thick nitrile rubber) ofchilled water piping complete as per specifications and as required complete in all respect.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 8

Punjab View Result →

39.

Rural Development #10251537 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

40.

Rural Development #10239644 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 11

Maharashtra View Result →

41.

Rural Development #10238207 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

42.

Drinking Water Supply and Sanitation #10236715 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Rajasthan View Result →

43.

Housing Urban and Rular Development #10235078 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Tamil Nadu View Result →

44.

Power #10172978 AOC

Contract Date: Apr 23, 2026 Contract Value : ₹ 21.94 Lakh

Government Departments No of Bidders 3

Uttar Pradesh View Result →

45.

Power #10160158 AOC

Tender for Mtps-I -Bm- Unit- Ii Boiler Pressure Parts - Aoh-2025 - Rectification Of Buck Stay Beam & Supports, Renewal Of Worn-Out Buck Stay Pin. Fabrication Of Buck Stay Cover Plate Etc., In Ist And Iind Pass Area And Rectification Of Critical Pipe Line Of Crh Steam Line Hangers And Allied Works.

Contract Date: Dec 12, 2025 Contract Value : ₹ 10.92 Lakh

Boards / Undertakings / PSU No of Bidders 2

Tamil Nadu View Result →

46.

Educational and Research Institute #10115164 Price Bid

Design, Supply, Installation And Commissioning Of A Cleanroom , A ) Cleanroom Construction 1.0 ) Wall Paneling And Ceiling A ) Progressive Type Double Skin Modular 100 Mm Thick Solid Wall Panel Made Of 0.8 Mm Thick Powder Coated Sheets On Both Sides With Puf As Infill Of Density 40 ± 2 Kg / M3, Gi Profiles For Reinforcement Along The Periphery With Bottom Track, And Necessary Arrangements, All Joints Shall Be Sealed With Cleanroom Compatible Neutral Grade Silicon Sealant. All The Cut-Outs Should Be Covered With Suitable Channels. , B ) Progressive Type Double Skin Modular 100 Mm Thick Wall Panel With Inbuilt Riser For Return Air Made Of 0.8 Mm Thick Powder Coated Sheets On Both Sides With Puf As Infill Of Density 40 ± 2 Kg / M3, Gi Profiles For Reinforcement Along The Periphery With Bottom Track, And Necessary Arrangements, All Joints Shall Be Sealed With Cleanroom Compatible Neutral Grade Silicon Sealant. All The Cut-Outs Should Be Covered With Suitable Channels. , C ) Ceiling Wall Panels I ) Grid Type Ceiling System For Class 100The Cleanroom Ceiling Shall Be Formed From A Heavy Duty Aluminium Walkable Extruded T-Grid Ceiling Systems For All Areas. Ceiling Grid Colour Should Match Wall Panel Colour ( Designer White Shade ) . The Ceiling Grid Shall Be Heavy Duty Walkable Inverted T-Grid Ceiling System Of Approx.. 50 Mm Twidth ( Gasket Type Ceiling ) To Be Provided On 600Mm X 1200Mm Hanging Configuration, The System Shall Include Aluminum ( Approx. 50 Mm Wide ) Extrusions, Aluminum Extruded Cross Connector With Hammer Head Bolts And Nuts, M8 Bolt And Matching Square Hanger And Other Standard Accessories. The Grid Should Be Suspended From The Parent Building Roof With Adequate Size Fasteners Etc. For Ensuring Structural Stability Of The Ceiling. Blank Ceiling Panels:50Mm Thick Heavy Duty Walkable Al. Honeycomb Ceiling Blank Panel Of Dimension 1200 Mm X 600Mm X 45 Mm / 50 Mm Thick, Using 45 / 50Mm Thick Aluminum Honeycomb Core Laminated With 0.8 Mm Thick Aluminum Skin On Both Sides, Static Dissipative Finished Of Designer White Shade All Complete. , Ii ) Progressive Type Ceiling For Class 1000 Progressive Type Double Skin Modular 75 Mm Thick Ceiling Wall Panel Made Of 0.8 Mm Thick Powder Coated Sheets On Both Sides With Puf As Infill Of Density 40 ± 2 Kg / M3, Gi Profiles For Reinforcement Along The Periphery With Bottom Aluminium Track, And Necessary Arrangements, All Joints Shall Be Sealed With Cleanroom Compatible Neutral Grade Silicon Sealant. All The Cut-Outs Should Be Covered With Suitable Channels. , D ) Coving: Coving Radius 50 Mm, Moc: Aluminiumcoving Shall Be Installed At :1 ) Wall To Wall 2 ) Wall To Ceiling 3 ) Wall To Flooring , E ) Coving 3D Inner Corner Pieces , F ) Outer Coving , G ) 2D Outer Coving Corner Pieces , H ) Wall Panel Cutouts : All The Necessary Cutouts Made On Wall Panels And Ceiling Will Be Flashed With Gi / Ms Powder Coated C-Channels , I ) Suspended Ceiling Support And Wall Panel Accessories : All The Suspended Ceiling Panels Will Be Supported With 10 / 8 Mm Threaded Rod And Turnbuckle For Easy Level Adjustment At Suitable Locations. Ancillaries Like C-Channel, L-Angles, Required For The Installation Ofm2 Wall & Ceiling Panels , J ) Window Modules Viewing Panels Shall Be Of Double Glazed 5Mm Thick Clear Toughened Glass, Finished With 20Mm Wide Ceramic Borderdimensions: 900X900 In Mm , K ) Cleanroom Doors: The Cleanroom Wall Systems Shall Include All Doors Complete With All Associated Hardware. The Cleanroomdoors Shall Be Of Gi / Ms Powder Coated Construction Of Approximate Size , Flush Configuration, Swing Type, Double Skin. Door Frame Powder Coat Color Must Match With Clean Room Wall System, With Door Closer, Handles, Lock Sets With Option Of One Or Both Side Access, View Glaze Shall Be Of Double Glazed 6Mm Clear Toughened. I ) Cleanroom Single Door-900X2100 In Mm , Ii ) Cleanroom Singleemergency Door-900X2100 In Mm , Iii ) Cleanroom Double Door -1400X2100 In Mm , L ) Fan Filter Modules And Hoodedhepa Filter Modules I ) Hooded Hepa Filter Modules For Class 1000 Hepa Filter Modules: The Cleanroom Ceiling System Shall Include Hepa Filter Ceiling Modules As Indicated On The Drawing. *The Filters Will Be Used As Terminal Air Distribution Device. The Air Supply Plenum Shall Be Connected Directly To A Connecting Collar On The Filter Top With Individual Damper In The Plenum And Flexible Ducts. * The Filters Shall Have H14 Class Filters As Per En1822 With An Efficiency Of 99.95%*The Design Air Velocity Through Filter Shall Be 0.45M / S With Ipd Of 130±5% Pa Or Better.*The Frame Of The Filter Shall Be Of Extruded Anodized Aluminium Construction.*The Filter Media Shall Be Glass Fibre With Hot Melt Separator. *The Filter Shall Have Expanded Sheet Metal Face Guard. The Face Guard Shall Be Powder Coated In Off-White Colour.* The Filter Shall Be Having Endless Polyurethane D-Profile, Liquid Pour To Solid In Extrusion Profile Seal At The Outlet. *All The Filters Shall Be Individually Tested According To En1822 And Computerized Scan Test Report Should Accompany Each Filter.*The Filter Shall Be Held In Place Utilizing ‘Hold Down’ Devices With The Ceiling Grid Using Channel On The Filter Top And T-Bolts In The Ceiling Grid Pressing The Filter Against Ceiling Grid. *All Filter Modules Shall Be Complete With Air Inlet Collar Of 12” Diameter ( Approx. ) . *Top Sheet Should Be Of G.I. / Aluminium Single Piece Drawn With Seamless Neck. In Case, Neck Is Not Seamless, Neck Joint To The Top Sheet Be A Proper Leak Proof Joint And With The Capability Of Supporting A Person Standing On The Top Surface. *Filter Media Shall Be Bonded To Extruded Aluminium Cell Sides.Dimensions :1210 Lx 600 D X 60 Mm Hepa Filter Are Rated 99.97% Efficiency In Removing 0.3? Or Larger Particles. Leak Free In Accordance With Latest I.E.S Recommended Particle.The Filter Media Is Micro Glass Fibre With Poly-String Separator, Sealed To Casing. The Filter Guard Is Provided With Diamond Pattern Expanded Sheet For Protection. , Ii ) Fan Filter Modules With Ulpa Filters For Class 100 : The Fan Filter Units Ffu’S Are Self-Powered Grid Module With Modular Design, To Fitting In Standard T Grid Ceiling. Total Height Is 320Mm. The Fan Filter Module Is U.L Listed And Ce Certified. Ffu Speed Can Vary From 0.2 To .5M / S And Air Flow Rate Vary From 460-760 Cfm. The Sound Level Will Be 55Db’S When Measured From 760Mm Below From Filter Face. The Vibration Level Is 0.9Mils. The Fan Motor Drive Will Be Direct Drive, Forward Curve Centrifugal Type With Sealed Bearing. The Motor Will Have Permanent Split Capacitor Type, Rated For Continuous Operation With Thermal Overload Protection With Two Speed Switch. The Power Requirement Is 230V, 50Hz Single Phase With Maximum Current Of 1.9A With 280Watts Power Input. The Fan / Motor Assembly Is Capable Of Delivering Air At Filter Pressure Of 9Mm To 23Mm Final State. These Ffm Will Have A Speed Controller For Increasing The Speed Of The Motor / Blower From Low, Medium And High. Dimensions :1220 Lx 610 D X 350 Mm H Ffu Material Of Construction : Al Zinc Alloy Hepa Filters Are Rated 99.997% Efficiency In Removing 0.12? Or Larger Particles. Leak Free In Accordance With Latest I.E.S Recommended Particle.The Filter Media Is Micro Glass Fibre With Poly-String Separator, Sealed To Casing. The Filter Guard Is Provided With Diamond Pattern Expanded Sheet For Protection. Dimensions :1210 Lx 600 D X 60 Mm H , M ) Return Air Grille With Collar Damper The Linear Diffusers / Grilles Shall Be Fabricated From Aluminum Extruded Sections. The Diffusion Blades Shall Be Extruded, Flush Mounted Type With Single Or Double Direction Air Flow. The Frame Shall Be Of Aluminum Extruded Section And Shall Hold The Louvers Tightly In Fixed Position. The Dampers As Described Under Grilles Shall Be Provided Wherever Specified. Return Air Grills With Damper At Room Side 800X400. , N ) Antistatic Pvc Flooring I ) The Cleanroom Flooring Shall Be Esd - Pvc 2Mm Thick And The Electro Static Dissipative Will Be Homogeneous Constructed Product Sliced From A Pressed Vinyl Block To Assure A Highly Flexible Tile Of Dense Construction, Dimensionally Stable, Extremely Hard Wearing, With A Completely Non-Directional Pattern. , Ii ) Esd Flooring Includes, Dedicated Earth Pit And Interconnecting Copper Strip 30X5 Mm Thick- 48 Rmt , O ) Cleanroom Lighting I ) Class 100 Cleanroom Lightscleanroom Teardrop Light Fittings For Iso 5 ( Class 100 ) And Surface Mounted Fittings To Be Provided Throughout The Facility To Achieve The 400-450 Lux Lighting Levels. The Teardrop & Surface Mounted Light Fittings Shall Comprise Of A Powder Coated Extruded Aluminum Body And Clear Acrylic Diffusers. Uv Filtration Film Having 350-400 Nm Thickness To Be Applied On Lights Or Uv Tube Sleeves Shall Be Used , Ii ) Class 1000 Cleanroom Lights: Supply And Installation Of Cleanroom Compatible Led Lights. The Envisaged Lighting Level In Clean Rooms Is 500 Lux, At 90 Cm Above The Floor. Lights Must Be Openable Towards Inside The Room. Dimensions: 600X600 Mm Power: 42 W , P ) Air Showersupply Of Ss304 Single Entry Class 10, 000 Airshower 1500 Lx 1500 D X 2300 H In Mm* Dimensions:1500 Lx 1500 D X 2300 H In Mm* Material Of Construction: Ss304 1.6 Mm Thick* Class 100 Compatible* Two Stage Filtration Eu6-Prefilter ( 95% Down To 5 Micron ) For Return Air & Fresh Air Intake* Doors: Ss304, 1, 6 Mm Thick Doors With Double Walled Flush Glass View Panels & Door Closer* Statically & Dynamically Balanced Motor- Blowers With Suspension Arrangement To Reduce Noise Level For Suction And Booster* Differential Pressure Gauge: 1 No. * On / Off Switches* Pao Test Port* Door Interlock Systems – To Ensure That Both The Doors Cannot Open At The Same Time & To Ensure That Both The Doors Will Be Locked During The Time Air Flow Is On.* Timer For Setting Air Shower Operation Time ( Settable For 30 Seconds To 5 Minutes ) * Emergency Stop Button* Straight Entry – Straight Exit / 90° L Type Door Opening * Automatic As Well As Manual Working. , Q ) Static Pass Box Dimensions 600X600x600 In Mmmoc: Ss304 , R ) Sterile Garment Storage Cabinet Supply And Installation Of Ss304, 1.6Mm Thicksterile Garment Storage Cabinet 1200X600x2100 In Mm , B ) Cleanroom Hvac A ) Air Handling Unit I ) Class -100-Ahu- Ahushall Be Of Double Skin, With 45+5 Mm Thick Puf Insulation Sand-Witched Panel, 0.8 Mm Thick Percolated Gss Outer Skin And 0.8 Mm Thick Plain Gi Sheet Inside. The Density Of Puf Insulation Shall Be Minimum 38 Kg / M3.The Casing Shall Incorporate Thermal Break Profile Aluminium And All Other Necessary Design Features To Ensure That Condensate Does Not Occur During All Seasons.Supply Air:4.853 M3 / S, Return Air:4.1 M3 / S , Fresh Air:0.735 M3 / Stotal Fan Static:150 Mm Wg, Cooling Coil Suitable For Chilled Water / Refrigerant Capacity:40 Tr, Heating Coil Capacity:76 Kw , Ii ) Class -1000-Ahu- Ahushall Be Of Double Skin, With 45+5 Mm Thick Puf Insulation Sand-Witched Panel, 0.8 Mm Thick Percolated Gss Outer Skin And 0.8 Mm Thick Plain Gi Sheet Inside. The Density Of Puf Insulation Shall Be Minimum 38 Kg / M3.The Casing Shall Incorporate Thermal Break Profile Aluminium And All Other Necessary Design Features To Ensure That Condensate Does Not Occur During All Seasons. Supply Air:4.382 M3 / S, Return Air:2.733 M3 / S , Fresh Air:1.649 M3 / Stotal Fan Static:150 Mm Wg, Cooling Coil Suitable For Chilled Water / Refrigerant Capacity:40 Tr, Heating Coil Capacity:57 Kw , B ) Chiller Unit ( 2W+1 S ) Supplying, Installing, Testing And Commissioning Of Ahri Certifiedair Cooled Scroll Water Chilling Units Of 40 Tr Capacity ( Actual ) Complete With Twin Screw Design Compressor With Star-Delta, Squirrel Cage Induction Motor, Starter Panel Machine Mounted, Water Cooled Condenser, Insulated Chiller, Flow Switch At Chiller And Condenser, Neoprene Pads, Integral Refrigerant Piping And Wiring, Bms Interface Unit Modbus, Counter Flanges Along With Flanged Connection For Condenser And Cooler Water In / Out Connections, Complete Charge Of Refrigerant And Oil, Accessories As Required And Called For, Automatic And Safety Controls Mounted In Central Micro-Processor Based Console Panel And All Mounted On A Steel Frame Complete As Per Specifications. Motor Shall Be Suitable For 415±10% 50 Cycles. 3Phase Ac Supply And Motor Cable Terminal Box Shall Be Suitable To Connect Copper Cabling. Refrigerant Used Shall Be Ozone Friendly Hfc134a / R410a As Detailed In Specifications. First Chiller Shall Be Factory Tested At Design Conditions At 100%, 75%, 50% And 25% Load. Cooling Capacity: 40 Trwater Flow-900 Lpmlpmsupply Water Temp. In Deg C- 5-7 Deg C Return Water Temp In Deg C-12 Deg C , C ) Chilled Water Pumps For Chillers ( 1 W+1S ) I ) Chilled Water Pumps Horizontal & Centrifugal Type Pumps. Supplying , Installation, Testing And Commissioning Of The Pumps Shall Be Horizontal, Close Coupled , Single Stage , Centrifugal , End Suction With Backpull Out Design. Hence , The Rotating Unit Can Be Removed And Serviced Without Disconnecting The Suction And Discharge Piping. The Pump Shall Be Balanced Statically And Dynamically. The Pump Are At Constant Speed And Suitable For Vfd Drive. The Noise Level Shall Not Exceed 75 Dba At 1M From The Source.The Pumps Shall Be Bms Compatible. Flow Rate:900 Lpm, Total Head: 30 M, Moc: Body : Ci, Impellor: Ss304 , Ii ) Chilled Water Piping With Al. Cladding Insulation: Chilled Water Piping With Al Claddingshall Be Installed For: Ahuand Pumps. Moc Of Pipe Shall Be Sch10 Ss304 With All Accessories , D ) Gi Ducting Supply, Installation, Testing & Commissioning Of Pre-Fabricated Gi Sheet Metal Ducting ( Prefabricating Ducting Means Duct Fabrication On Cnc Machines ) Complete With Gi / Ms Supports ( Complete Supporting Structure To Install Ducts At Site ) With Fully Threaded Gi Rods, Gi Nuts And Bolts ( With Check Nuts Wherever Applicable ) , Vanes, Splitters, Thermal Isolation Blocks, Etc. As Per Drawings And Smacna Standards For 4 Inch And 2 Inch Pressure Class. Ducting Will Have Ductmate Flanges With Food Grade Rubber Gasket Between Theflanges. All Duct Supports Shall Have Minimum 3 Mm Thk. Insulated Tape Between Support And Duct. All Ducting Seam To Be Sealed With Rtv Sealant. The Zinc Coatingthickness Should Not Be Less Than 120 Grams / Sq, Mtr ( Gsm ) .All Duct Joints Shall Be Inspected For Leakage. I ) 24G , Ii ) Ms Supporting System , E ) Insulation Supply, Installation Ofnitrile Rubber Insulation With One Side Aluminum Faced. The Insulation Material Shall Be Fm Approved. The Insulation Shall Have Fire Performance Such That It Passes Class ‘O’ As Per Bs 476 Part 6 For Fire Propagation And Class 1 As Per Bs 476 Part 7 For Surface Spread Of Flame. All Insulation Joints ( Including Flange Joints ) To Be Sealed With 3 Width Self Adhesive Tape. I ) 19Mm Thick Insulation , Ii ) 16Mm Thick Insulation , F ) Dampers Manual Low Leakage Volume Control Damperof Class 4 As Per Bs En 1751 ( Permissible Leakage Allowed -6.2 L / S / Sq M, Test Certificate Required ) And Shall Be Made Out Of 18G Gi, Opposed Type Multi Aerofoil Shape Blade With Handle And Wing Nut, Clearly Marked With Open / Close, Percentage Open, Locking In Position And Sealing Arrangement For Branches. The Dampers Should Be Suitable For Manual & Motorized Operation And Shall Have The Plain & Rigid Base Plate To Install Actuator. Damper Shaft Rod Shall Be Square. I ) Gi Round Damper 250Mm Dia 18 G , Ii ) Flexible Insulated Duct 200 Mm Dia , G ) Flexible Canvas Connection Supply Of 150 Mm Deep Antivibration Flexible Joints Made Out Of Imported Fire Resistance Flexible Double Canvas Sleeve With Extruded Aluminium Frame / Flanges On Both Sides , C ) Cleanroom And Hvac Electrical A ) Hvac Electrical Dbsupply, Installation, Testing And Commissioning Of Floor Mounted Type Vfd Electrical Control Panel And Provision Formicroprocessor Controller With Hmi ( Refer To The I / O Points Mentioned In The Technical Specifications Document Under Section 4.3: Plc Panel With Hmi ) Provision For :Safety Interlock I ) Ahu Blower-Vfd-6 Kw, 3 Ph , Ii ) Chiller Unit-41 Kw, 3 Ph-Contactor , Iii ) Heater- Ssr-60 & 80 Kw 3 Ph , Iv ) Pumps-8 Kw, 3 Ph- Contactor With Star Delta Starter , V ) Exhaust Blower-8 Kw 3 Ph, -Contactor With Star Delta Starter , Vi ) Process Cooling Chiller-8 Kw, 3Phcontactor , Vii ) Compressed Air Plant -8 Kw, 3 Ph Contactor , Viii ) Di Water Plant- 3 Kw , 3 Ph Contactor , Interlocks I ) Flow Switch , Ii ) Ahu Door Interlock , Iii ) Chiller-Pump Interlock , Iv ) Smoke And Fire , V ) Thermal Interlock , Vi ) Access Control Emergency Interlock , B ) Cleanroom Electrical Sub Db - Ups Db And Raw Power Db Supply, Installation, Testing And Commissioning Of Wall Mounted / Floor Mounted Type Distribution Board. Provision At Db: I ) Cleanroom Sub Db - 2 Nos ( 1 Ups, 1 Raw Power ) , Ii ) Cleanroom Lighting ( 40W ) - 1 Ph , Iii ) Cleanroom Power Points ( 5 / 15A ) , Iv ) Fan Filter Units ( 2.5 A ) - 1 Ph , V ) Air Shower ( 1.5Kw ) - 3 Ph , Vi ) Sterile Garment Cabinet ( 6 A ) - 1 Ph , Vii ) Static Pass Box ( 6A ) - 1 Ph , Viii ) Access Control System ( 6A ) -1Ph , Ix ) Cctv - 1Ph , X ) Clear Room Equipments: 3Ph 32 A , Xi ) Cleanroom Power Points:1Ph 5 / 15 A Power Points , C ) Electrical Cabling And Accessories Hvac Cabling: Hvac Cabling Shall Be Laid In Metal Trunking ( Electrical Incoming Power To Hvac Panel, Sub Db Will Be Provided By Iitm ) I ) Cabling For Ahu Blower-6Kw- 2Nos.-4 Mm2, 4 Core Armored Cable , Ii ) Cabling For Ahu Blower Interlock And Emergency Light- 2Nos.- 2.5Mm 2, 3 Core Cable , Iii ) Cabling For Modulating Valve- 2Nos.- 1.5Mm 2 Shielded 3 Core Cable , Iv ) Cabling For Heaters-3 Ph , 60 Kw & 80 Kw 2Nos.6Mm 2, 3 Corearmored Cable , V ) Cabling For Chiller- 41 Kw-3Nos.- 25Mm2, 5 Core Armored Cable , Vi ) Cabling For Pumps- 8 Kw-2 Nos.-4 Mm2, 4 Core Armored Cable , Vii ) Cabling For Process Cooling Chiller- 8 Kw-1 Nos.-4 Mm2, 4 Core Armored Cable , Viii ) Cabling For Compressed Air Plant- 8 Kw-1 Nos.-4 Mm2, 4 Core Armored Cable , Ix ) Cabling For Exhaust Blowers- 8 Kw-2 Nos.-4 Mm2, 4 Core Armored Cable , X ) Cabling For Di Water Plant- 3 Kw-1 Nos.-2.5 Mm2, 4 Core Armored Cable , Xi ) Cabling For - Flow Sensor- 2 Nos.1.5Mm2 Shielded 3 Core Cable , Xii ) Cabling For - Room Temp And Rh- 2 Nos.1.5Mm2 Shielded 3 Core Cable , Xiii ) Cabling For - Thermal Sensor-2 Nos.-1.5Mm2 Shielded 3 Core Cable , D ) Cabling For Cleanroom Equipments Cabling For Cleanroom Equipments Shall Be Layed Through Pvc Dado I ) Cabling For Cleanroom Lights-30 Nos- 2.5Mm 2, 3 Core Cable , Ii ) Cabling For Fan Filter Units-16 Nos.- 1.5Mm 2, 3 Core Cable , Iii ) Cabling For1ph Power Points-30 Nos.-2.5Mm 2, 3 Core Cable , Iv ) Cabling For 3Ph, 32 A, 5 Wire , Power Points - 10 Nos- 4Mm2, 5 Core Cable , V ) Cabling For Air Shower- 1 Nos-2.5Mm 2, 5 Core Cable , Vi ) Cabling For Garment Cubicle- 1 Nos, .- 2.5Mm 2 , 3 Core Cable , Vii ) Cabling For Access Control System-2 Nos.- 1.5Mm 2, 3 Core Cable , Viii ) Cabling For Cctv- 11 Nos-Cat 6 Cable , Ix ) Earthpits , D ) Process Utilities A ) Gas Lines For N2, Ar And O2supply And Installation Ofuhp Gas Lines Double Cylinderauto Changeover Over Panel For N2, Ar & O2 I ) Double Cylinder Auto Changeover Panel For N2- 1 Nos. , Ii ) Single Cylinder Auto Changeover Panel For Ar- 1 Nos. , Iii ) Single Cylinder Auto Changeover Panel For O2- 1 Nos. , Iv ) 1 / 4 Ss316 L Ep Pipes , V ) Tap Off Points With Diaphragm Valve, Regulator And Gauge , Vi ) Supporting System And Clamps , Vii ) Cylinder Mounting Accessories , B ) Compressed Air ( Cda ) System I ) Supply Of Compressor Supply Of Oil Free And Moisture Free Scroll Compressor 9 Cfm Capacity, 10 Bar Pressure Rating , With 150 L Storagetank , Ii ) Supply And Installation Of Compressed Air Line: A ) Moc: Ss316l3 / 4 -50 Rmt , B ) Tap Off Points: Tap Off Points With Isolation Valve And Regulator , C ) Supply & Installation Of Process Cooling Water System I ) System Must Have Working And Stand By Pumps Of 50-60 Lpm At 17-19 Deg C At 4-5 Bar Pressure, Storage Tank Of 400 L, All Ss304interconnecting Pipes And Valves & Control Panel, Moc: Moc Of The System Ss304 , Ii ) Supply & Installation Of Process Cooling Water Distribution A ) Moc Of Distribution Lines: 1 Upvc Sch 80 , B ) No. Of Tap Off Points ( Tap Off Points Should Have Ball Valve, Gauge, Flow Meter, Prv ) , D ) Utility Drain Line I ) Utility Drain Line Shall Be Pp Sch 80 Dn 50Mm , Ii ) Tap Off Points , E ) Polypropylene Wet Chemical Bench Polypropylene Wet Chemical Bench-1800 Wx 950 D X 2300 H Mmmoc: Polypropylene Fire Retardant Utilities:N2, Di Water , Ro Water Connection, Drain, Power Points5 / 15A- 4 Nos, Lights- 2 Nos, Storage Trolley- 2 Nos. , F ) Scrubber And Exhaust Ducting Wet Scrubber I ) Pp+Frp Packed Bed Type Wet Scrubber For 3500 Cfm Capacity , Ii ) Pp+Frp 3+2 Mm Thick Ducting 300Mm Dia. , Iii ) Ppfrp Blower 2500 Cfm Capacity @ 350 Mm Total Static , Iv ) Tap Off Points With Vcd Dia. 200 Mm , G ) Fume Hood For Solvents Moc: Polypropylene Fire Retardant Dimensions: 1200 W X950 D X2300 H In Mmutilities:N2, Di Water , Ro Water Connection, Drain, Power Points5 / 15A- 4 Nos, Uv-Lights- 2 Nos, Storage Trolley- 2 Nos. , H ) Blower And Exhaust Ducting Blower Moc: Ss304 I ) Blower Capacity: 1000 Cfm @ 75 Mm Total Static , Ii ) Duct Moc: Ss304 200Mm Dia With All Accessories-25Rmt , Iii ) Bibo Box For Activated Carbon Filter , I ) Di Water Plant A De-Ionized Water System Consisting Of A Generation And Storage System For Generating And Storing Type-I ( Resistivity = 18 M?-Cm ) And Type-Ii Water ( Resistivity = 1 M?-Cm ) Should Be Provided. In Addition To The Resistivity Metrics, Plant Shall Be Recirculatory Type And Pressure Depended Type. Di / Type I Water Flow Rate:1-2 Lpm@ 1.5-2 Bar Ro / Type Ii Water Flow Rate:2 Lpm @ 1.5-2 Bar , J ) Di Water Pipingdi Water Piping Moc: Pp Pp Dn 25Mm Pipe With All Accessories- 70 Rmttap Off Points- 3 Nos.Tap Off Must Have Isolation Valve- 3 Nos. , E ) Spin Coater Programmable Spin Coater • Bowl-Shaped Process Chamber Which Can Hold Size 6 ( ~150 Mm ) Diameter Wafers Or 5 ( ~125 Mm ) Square Substrates • Ac Brushless Motor Featuring Bi-Directional Rotation / Agitation, High Acceleration, And A Wide Speed Range • Digital Process Controller For Easy Programming • Speed : 1-12, 000 Rpm • Accuracy <+-0.5% Of Full Speed • Time: 1 Second To 99 Minutes 59.9 Seconds In 0.1 Second Increments • Programs: Twenty Multi-Step Programs Or Manual Mode • Real Time Display Of Rpm, Time And Program Stamps • Input And Control Through Soft Touch Keypad • Acceleration: Up To 13K Rpm / Sec With Standard Chuck ( Programmable In 1 Rpm Increments ) • Pc Interface Software To Be Included • Fluid-Control Lid Directs Materials Towards Rear Drain — No Drips Should Be Encountered When Opening Chamber • Chemically-Resistant Lid With Ø3 / 4; ( Ø19 Mm ) Center Opening • Npp Vacuum Chuck For Ø50 Mm Through Ø150 Mm Substrates • Npp Fragment Chuck Adapter — Fits Over Above Chuck For Holding 10 Mm Through ~50 Mm Pieces Ø1.5; ( Ø38 Mm ) Npp Drain Port And Nitrogen Purge • Polypropylene Drain Container To Store Exhausted Drain Reservoir • With Necessary Interlock, Latch And Lock For Safety Of The Door • With Oil-Less Vacuum Pump ( 220 Vac, 50 / 60 Hz ) And Inlet Port , F ) Life Safety And Security System A ) Cctv - Cameras , B ) Access Control System For 1 Door , C ) Door Interlock System For Air Lock Room , D ) Smoke And Fire Detection System , E ) Local Area Network , F ) Telephone , G ) Local Fire Extinguishers : Suitable For A, B, C Fire Classifications 5 Kg Capacity Suitable For Cleanroom Application , G ) Cleanroom Furniture I ) Ss316l Cleanroom Cross Over Bench 2100X400x550mm , Ii ) Ss316l Working Table 1500X900x750mm With 2 Power Points , Iii ) Ss316l Tables With Under Table, Table Dimensions 1200X750x750, Under Tablecubicles 500X700x700, 2 Drawers And 1 Door , Iv ) Class 100 Compatible Cleanroom Chairs , V ) Class 100 Compatible Cleanroom Stools , Vi ) Polypropylene Chemical Storage Cabinet 900 W X550 Dx2100 H In Mm , Vii ) Ss316l Cleanroom Bins-Dia 350X650 H In Mm , H ) Room Differential Pressure Gauges , I ) Temp And Rh Indicator , J ) Engineering, Design And Drawings , K ) Documentation , L ) Commissioning And Validation

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Tamil Nadu View Result →

47.

Housing Urban and Rular Development #10088182 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Uttar Pradesh View Result →

48.

Educational and Research Institute #10058751 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Uttarakhand View Result →

49.

Science and Technology #10055799 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 2

Tamil Nadu View Result →

50.

Housing Urban and Rular Development #10040979 AOC

supply installation testing and commissioning Of Air Conditioning And Electrical Installation Work At Sncu Of Abinash Dutta Maternity Home Under R.G.Kar Electrical Section-Ii- 1 Part A: Air ConditionerSITC of Microprocessor based air cooled 11TR ceiling suspended ductable type Split Air Conditioner having nominal cooling capacity of 132000 BTU/hr +/- 500. at ISI condition suitable for operation on 400V, + 5% - 50 Hz. - 3PhAC supply. Each unit consist of 2no.Scroll compressor Make : Copeland/Hitachi/Tecomsh with Single/Outdoor Unit & 1 nos.ofIndoor Unit with R-410A Refrigerant, 8mm External Static Pressure , COP: 3.63, Air flow 4400CFM+ +/-500 CFM,Designed up to 52⁰C .(Make: Hitachi/ Daikin/Voltas) 2 Supply & delivery 2 TR capacity concealed (R410a) type Split Air Conditioner (Wireless HAT) of rated cooling capacity of 24000 BTU/hr. with 1Nos.Rotary compressor, 1nos. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-230V-1ph-50Hz. Air-flow/per IDU:- 800CFM. ( Make: Hitachi/Daikin/O-General/Bluestar) 3 Installation , testing & commissioning of 1.5/2.0 Tr.Air Conditioner both indoor/outdoor unit incl. S&F of 40x40x5mm MS angle iron frame for installation of ODU and sealing the holes in wall create during the copper pipe connection between the IDU & ODU by proper sand -- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages. 4 Installation , testing & commissioning of 11 Tr.Air Conditioner both indoor/outdoor unit incl. S&F of 50x50x6mm MS angle iron frame for installation of ODU and sealing the holes in wall create during the copper pipe connection between the IDU & ODU by proper sand -- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages. 5 Supply & laying ofGauge Copper Pipe(OEM make)for suction & liquid line with wraping insulation tape and mending the holes & damages as directed by EIC. i)gauge copper pipe1/2 1mm thick for liquid line (As per standard ASTMB-280,EN-12735 ) with tube thickness 0.6 mm incl. 13 mm for liquid(make: Ryoku/Nippon) with bracketsas( per direction of E.I.C.) for 11 Tr Ductable Split air Conditioner 6 ii)gauge copper pipe 7/8 0.7 mm thick for suction(As per standard ASTMB-280,EN-12735 ) with tube thickness 0.9 mm incl. 19 mm for liquid(make: Ryoku/Nippon) with bracketsas( per direction of E.I.C.) for 11 Tr Ductable Split air Conditioner 7 iii) gauge copper pipe 5/8 0.7mm thick for suction line(As per standard ASTMB-280,EN-12735 ) with tube thickness 0.6 mm incl. 13 mm for liquid(make: Ryoku/Nippon) 8 iv) copper pipe 1/4 0.6mm thick for liquid line (As per standard BS864 or ANSIB 16.22) incl.13mm thick insulation.(make: Ryoku/Nippon) 9 S& F of a 32 mm dia uPVC drain pipe ((Make. Oriplast /Supreme) needs to be attached for extending drain pipe line from the indoor unit of the Ductable/split machine/attached tray in case of window machines to direct the flow of condensate water to the existing nearest rain water pipe or sewerage pipe connected to the building including S& F of PVC Elbow(32 mm dia ), PVC Tee (25 mm dia), PVC Socket (32 mm dia), 3/4 inch dia PVC drain pipe, PVC China clip, adhesives( PVC M-Seal) as per the requirement.[NS] 10 S& F of a 25 mm dia uPVC drain pipe ((Make. Oriplast /Supreme) needs to be attached for extending drain pipe line from the indoor unit of the Ductable/split machine/attached tray in case of window machines to direct the flow of condensate water to the existing nearest rain water pipe or sewerage pipe connected to the building including S& F of PVC Elbow(25 mm dia ), PVC Tee (25 mm dia), PVC Socket (25 mm dia), 3/4 inch dia PVC drain pipe, PVC China clip, adhesives( PVC M-Seal) as per the requirement.[NS] 11 Supply & laying 4core 2.5 sq. mm. PVC insulated & unarmoured copper wire(Make- Finolex/Havells/KEI) for 1.5/2.0 Tr. Air conditionermachine (make: Ryoku/Nippon) 12 Supply & fixing of fire retardant nonporous double layer flexible connection (CANVAS) between each indoor unit and duct as per direction of E.I.C. 13 Charges for covering the Indoor Unit suspended from the ceiling incl makingtrap door arrangement with 3 mm thick ACP board(M- Aludecor/Protap Bond/HexBond/Alstone)complete with inkages, levers, fitings.support all accessories for IDU maintenance ad per direction of EIC. The inside face of the ACP should be covered with 13 mm thick nitrile rubber 14 Supply, Fitting & Balancing of Aluminium powder coated Supply air diffusers/grilleswith GI enamel painted oppose blade volume control dampers(with VCD). Supply air grilles shall have duel adjustable louvers .Brand Approve by as directed by EIC.Make - Systemair / Premire / Caryaire / Airmaster 15 S & I of VI pad for outdoor unit. 16 ACP DROP CELLING :-Supply & Erection of aluminium composit panels (ACP). Interior grade of thickness 3.00 mm comprising of protective flim, polyester coating. Finally service as per manufacture specification finished withaluminium screw and silicon sealent complete in all respect including all incidental charges etc. as per direction . The colour is Off White colour ACP Combinationas per direction ofEIC.( Make-Aludecor/Urobond or as directed by EIC) 17 The structure should be made of 1.5x1, 16 SWG aluminium Angel . The grid (4x3) of aluminium preperation in such way that it rest the ACP ducting .iii)Suspension :-Suspension is done from celling with 6mm/8mm dia 10 long GI threaded rod .the GI rod is fixed at ceiling with clamp & Flush nut. At least 8 gapping inbetween them Pasting of 9 mm thick Nitrile rubeer thermal insulation with adhesive on ACP ducting cum ceiling . The insulating ruber containing thin aluminium foil on it at other side.(M- Aludecor/Protap Bond/HexBond/Alstone) 18 Supply, Installation, balancing and commissioning of fabricated at site Aluminium sheet metal ducting complete with neoprene rubber gaskets, elbows, splitter dampers, venes, hangers, support etc as per approved drawings and specification of following sheet complete as required (Make- Tata steel/ Sail/ Jindal) A) 24 SWG 19 B) 22 SWG 20 Duct tharmal insulation by supplying and fixing of following thickness dully laminated aluminium foil of mat finish closed cell Nitrile rubber (Class O ) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50mm wide and 3mm thick self adhesive nitrile rubber tape insulation complete as specification and as reqired.13mm thick nitrille rubber 21 Duct Inside Acoustic insulation by supplying and fixing of following thickness open cell Nitrile rubber (Class O ) insulation on existing duct after applying suitable adhesive for Nitrile rubber.10mm Open cell nirille rubber for acoustic 22 Supply & Fixing of22 G GI aerofoil blades type Non Return Dampers complete with linkages, levers, fittings, supports, all accessoriesany other item required to make the system complete as per direction of E.I.C.(Make: Air Kolkata/Primier) 23 Supplying, fabrication & fixing3 Nos. M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) of 1m length for making Base Frame for installation of outdoor unit upto 16.5 Tr split AC incl. drilling 2 nos holesin each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with 2 Nos. horizontal angle of 50 mm x 50 mm x 6 mm incl. fiber sheet shadeas per Direction of E.I.C. incl. Cutting of Grill of a window (if needed) and mending good the damages by making door like arrangement for permanent access to ODUs. 24 Part B: Electrical Installation WorkDismantling the existing Electrical Installation and Old and defunct AC machines with Cos own tools and tackles and manpower.and store it to the hospital store within 1.6 KM 25 Supplying and Laying of following sizes Al armoured PVC/XLPE cable surface on wall / on wall by clamp (Havells/Glostar/KEI/Currency) with 2X10 SWG GI wire as per direction of EICi)4 core 16 sqmm 26 Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofXLPE/PVC armoured cables as below :i)4 core 16 sqmm 27 Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :i)4 core 16 sqmm 28 Distributionwiring in 1.1 KVsingle core stranded FRPVC insulated & unsheathed copper wire (make-Finolex/Havells/KEI/Currency) in 20mm size PVC rigid conduit FR (Precision make) incl. necy. fittings as requiredi)2 x 2.5 sqmm + 1 x 1.5sqmm (for Power plug & Com. board) 29 Supply and fixing waterproofPVC loop box comprising with 32A 4 pole MCB and suitable size power connector.Make: Hensel/Legrand/Syntax 30 Supply and fixing of 3 phase Timer mini control panel on wall comprising of i) 415 V AC, 63A 4 Pole Power contractor,(4 NO),- 2 nos ii) Digital Timer24 hour C capacity, 230 V AC Supply, iii) 415 V, 63 A,4 POLE MCB C-type,- 2 nos iv)AC toggle switch for Auto & manual mode v) 415 V, 63 A, 3 way terminal vi) 15 A, 8 way phase & natural bar to be mount on DIN rail with necessary inter connection with 1.5 (control & sq. mm cu flexible 16 sq. mm(power) wire (finolex/havels/kei) including ferrule marking & socketing with in the 16 way SPNDB MCB Enclosure Box Material Legrand & LT 31 S&F 1-Ph. AC timer controller in 12-way SPN DB with 1no front open hinged type door for providing incomming and outgoing copper wires and other accessories. The box having following accessories: a) 25 DP MCB-1no. b) Clock type analog time switch -1no.c) Three pole40A power contacter with 250V, Magnetic coil - 1no.d) 60A capacity 3Way AC/DC terminal block-1no.e) LED Indicator lamp with pilot fuse -2no. f) MCB changeover switch- 1no.g) Allen key lock-1no. (Make- L & T/ ABB) 32 Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 33 Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. 34 (Rate should be quotated including all taxes and duties, GST and considering the value of less cost materials.)

Contract Date: Apr 22, 2026 Contract Value : ₹ 12.07 Lakh

Government Departments No of Bidders 3

West Bengal View Result →

TenderDetail

Loading tenders