View Bid Results For Grp Pipe Tenders

We found 141 Bid Results related to grp pipe tenders. You can find Contractor details who won grp pipe tenders along with contract details in Bid awards announcements section.

Indian Tenders
1
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
4
Live Opportunities Worldwide
Filters
Stage
113
20
8
Tender Publishing Platform
24
117
State / UT
23
23
22
16
11
10
10
7
6
4
4
4
4
4
3
3
2
2
1
1
1
1
1
1
Contract Value
31
23
59
25
Publish Date
0
0
0
0
0
Sector
21
35
19
19
18
14
8
7
4
3
2
2
1
1
1
1
1
1
1
1
1
1
Ownership
4
65
36
20
20
Within keyword
Active filters:
Showing 1–3 of 141 tenders matching your filters
1.
Public Administrative Department #11495365 AOC
Supply And Delivery Of Timers Spare Material To Municipal Store Under Mgf In Nalgonda Municipality-CONCRETE 1. plain and reinforced concrete,code of practice for. 2. Laying in Situ cement concrete flooring 3. Sampling and analysis of Concrete MASONRY 1. Brick Masonry 2. Construction of Stone Masonry PIPES AND FITTINGS 1. Asbestos cement pressure pipes. 2. Concrete pipes with and without reinforcement 3. P.S.CPipes (including fittings) 4. Method of tests for contrete pipes 5. Materials for M.S. Specials 6. Specifications for M.S. Specials for P.S.C.Pipes 7. Specifications for Steel cylinders reinforced Concrete Pipes 8. Methods of tests of concrete pipes 9. Centrifugally Cast(Spun) iron pressure pipes for water gas and sewage including fittings. 10. Specifications for Centrifugally Cast (Spun) D.I. Pipes for Water ,Gas and Sewage. 11. D.I.Fittings for pipes for water,gas and sewage. 12. Dimensional requirements of rubber gaskets for Mechanical joints and push on joints for the use with C.I.D.I.Pipes. 13. C.I.Specials for Mechanical and push on flexible joints for pressure pipe lines for water gas and sewage. 14. HDPE pipes 15. BWSC pipes 16. UPVC pipes 17. GRP pipes 18. Horizontally cast iron double flanged pipes for Water ,gas and sewage. 19. Cast iron fittings for pressure pipes for Water,gas and sewage. 20. Cast iron detachable joints for use with Asbestos cement pressure pipes. 21. a) Rubber rings for jointing C.I.Pipes, RCC Pipes and A.C Pipes. b) Rubber rings for jointing PSC Pipes. 22. Rubber rings for jointing AC Pipes with AC couplings. 23. Pig Lead 24. Hemp Yarn 25. Rubber insertion to be used in jointing C.I.D.F.Pipes. 26. Bolts & Nuts to be used in jointing C.I.D.F.Pipes WATER SUPPLY FITTINGS 1. Sluice values for water works purposes (50 to 300 mm dia size) 2. Sluice values for water works purposes (300 to 1200 mm dia size) 3. Surface boxes for sluice values 4. Manhole covers and frames,cast-iron. LAYING OF PIPES 1. Laying of Asbestos Cement Pressures Pipes 2. Laying of Concrete Pipes.1 3. Laying of Cast-Iron Pipes 4. Laying of PSC Pipes 5. Laying of PSC Pipes X. MACHINERY 1. Batch type concrete mixer. 2. Sheep foot roller XI. SAFETY 1. Safety code for excavation works. 2. Safety Code for scaffolds and ladders Part-I-Scaffolds. Part-II-Ladders. XII. Earthwork and formation of S.S.Tanks. 1. Method of test of soils for suitablitity of soils for embankkemetn of S.S Tanks 2. Code of Practice for Drainage System for Earth and rock fill dams. 3. Filters Materials Requirements. 4. Earth work and formation of embankment for S.S.Tanks. 5. Morrum(Gravel) bracking to rough stone dry packing and gaveling to top and side slope of bunds 150 mm thick. 6. Rough stone dry packing aprons and revetments XIII FILTRATION PLANTS WITH DUAL MEDIA AND TUBE SETTERLS. 1. Guide lines for flauculator devices 2. Guide lines for rapid mixing devices 3. Recommendations for handing and dousing devices for chemicals for water treatment 4. Requirements of Chlorination equipments 5. Requirements of settling tank (clarified equipment for water treatment plant 6 Requirements of Water Filtration equipment etc
Contract Date: Ref. Documents Contract Value : ₹ 7.27 Lakh
Local Bodies No of Bidders 1
Telangana View Result →
2.
Public Administrative Department #11444229 AOC
Maintainance Of Water Supply Pipe Lines And Attending Leakages On Distribution Pipe Lines And Grp (Raw & Clear Water) Pumping Main In Nirmal Town Under Mgf/Pp/15Thfc/Any Other Grants
Contract Date: Ref. Documents Contract Value : ₹ 21.10 Lakh
Local Bodies No of Bidders 1
Telangana View Result →
3.
Housing Urban and Rular Development #11167788 Technical Bid
Tender for Providing & Laying Of Grp & Ms Pipe Line Under 85 Cusec Gangajal Pariyojna, Greater Noida
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
4.
Public Administrative Department #11148628 AOC
Maintenance Of Water Supply Pipe Lines By Attending Leakages On Distribution Pipe Lines And Grp(Raw & Clear Water) Pumping Main In Nirmal Town Under Mgf/Pp Grants
Contract Date: Ref. Documents Contract Value : ₹ 3.91 Lakh
Local Bodies No of Bidders 1
Telangana View Result →
5.
Tourism #11114098 AOC
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. B) All Types Of Ordinary Rock Including All Types Of Laterite Rock, Blasting Prohibited , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Brick Work Using Common Burnt Building Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) With Bricks Of Class Designation 40 Kg / Cm2 (Wire Cut Bricks) In Superstructure Upto Floor Five Level. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry Usign Fly Ash Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) With Bricks Of Class Designation 40 Kgs / Cm2. Above Plinth Upto Floor V Level 200 X 95 X 95 , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: A) All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) With Usage Of Ordinary Portland Cement Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineerin-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. Moulding As In Cornices, Window Sills Etc. Exceeding 15 Cm In Girth. , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates Cornices & Mouldings , Extra To Be Added For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De- Shuttering And De-Centering At All Levels, Over A Height Of 3.5M, For Every Additional Height Of 1M Or Part Thereof. (Plan Area To Be Measured) Suspended Floors, Roofs, Landings, Beams And Balconies (Plan Area To Be Measured) , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4b Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint. B) In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing & Fixing Upvc Door Frame Yashashri Make Or Equivalent Made Out Of Upvc Extruded Multi Cavity Frame Of 60 Mm X 60Mm X 2Mm Wall Thickness. Frame Is Reinforced With G.I. Channel & Welded In Corners With Average Weight 0.80 Kg Per Running Mtr. These Frames Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing & Fixing 20 Mm Door Shutter Yashashri Make Or Equivalent, Made By Using 20Mm X 155Mm X 1.2Mm Upvc Multi-Cavity Section And Boarder Of 30Mm X 40Mm X 2.5Mm Upvc Multi Cavity Section. The Corners Are Joined By Inserting Polymetric Corners & Hardware Used For Fixing The Door Shutter Is Stainless Steel Hinges & S. S. Handle & S.S. Tower Bolt. The Average Weight Of 20Mm Door Shutter Is 4.60Kg Per Sq Mtr. These Upvc Sections Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete 250 X 16 X 5 Mm , Providing & Fixing Bright Finished Stainless Steel Ss 304 Grade Aldrops With Screws Etc. Complete. 250 X 150Mm. All Works Complete As Per The Drawing, Specification And Direction Of The Engineer-In-Charge-In-Charge , Providing And Fixing Stainless Steel D Type Handles With Necessary Screws Etc Complete A) L 300Mm/325Mm X 22 To 25Mm Dia , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete 125 X 70 X 4.0Mm (Ordinary Type) , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 200 X 10 Mm , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 150 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete A) Dark Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. C) 80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm.D) 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In All Colours Except Grey (M35 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In Grey Colour (M35 Grade) , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade, Area Of Slab Over 0.50 Sqm A) Jet Black , Providing And Laying Polished Granite Stone Flooring, Coping In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building, All Complete As Per The Architectural Drawings, With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade, Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. Polished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Providing 25 Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer-In-Charge , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) 20 Mm Thick. , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Providing And Laying Jet Black Mirror Polish Granite Flooring And Dado Over 20Mm Thick Base Of Cement Mortar 1:4 Laid Over And Jointed With Cement Slurry Including Rubbling Complete Granitic Slab (Jet Blck With Mirror Polish) 20 Mm Thick Add Q0% Wastage 1.00 , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Approved Make And Colour With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. , Providing And Fixing Granite Stone Slabs (Mirror Polished) 18Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On Cement Paste And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , Providing And Laying 300X350x160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 150 Mm Strip Between Five Stone For Grassing.Strips To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.( Price Including Stone, Gardening Soil, Fertilizer And Grass Etc. ) , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , Providing And Fixing Colour Coated Galvulium Roofing Sheets Of 0.5Mm Thickness Including All The Accessories (Tata Make) But Excluding The Cost Of Purlins, Rafters, Trusses, Flashings Etc. Complete As Per The Directions Of The Engineer In Charge. , Add For Providing & Fixing Flashings -[Corners, Ridges, Valleys, Gable End & Trims] (Girth Upto 610Mm) Including All The Accessories Complete As Per The Directions Of The Engineer In Charge. , Providing And Fixing Prince Or Equivalent Make Pvc Swr Half Round Eaves Gutter With Bolts, Nuts And Flat Iron Brackets 40 X 3 Mm Size Complete. 140 Mm Nominal Size , Extra For Providing Flat Iron Bracket 50 X 3 Mm Size Instead Of 40 X 3 Mm Size With Necessary Bolts Nuts, Washers Etc. For Fixing A.C. Gutters To Purlins. , Extra For Providing And Fixing Prince Or Equivalent Make Pvc Swr Short Stop Ends For Socketed Half Round Eaves Gutters. 140 Mm Nominal Size , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Of Flashing Tape Along Wall And Tile Jointes ( Abutment Area ) Including Fixing Of Aluminium Strip Above Flash Including Sealing The Top Edge With Uv Resistant Sealant Etc Complete. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Extra For Plastering Done On Mouldings, Cornices, Or Arch It Raves Including Neat Finish To Line And Level. In One Coat , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Mts. Lead. , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Carting Away Unwanted Excavated Material Such As Soil, Lime, Moorum, Building Rubbish, Laterite Stone, Excavated Earth, Ordinary Rock Etc. From Site Lead Of 5 Km Including All Loading & Unloading Charges ( A ) ( By Mechnaical Automative Transport ) Contractor Should Arrange Land For Dispose Up These Material At His Own Cost Lead Upto 5 Km. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. , Supply, Fabrication And Installing In Position Ms Gates Of Required Width And Height Of Including Wicket Gate And Rolling Gate(If Necessary) Of Approved Size Made Of Channels Joists, Angles, Plates, Pipes And Ms Sheets Including Stiffeners, Bracing, Fabricated Hinges, Ms Aldrops Locking Arrangement, Tempered Steel Pivots, Guide Track Of Ms Tee, Ball Bearing Arrangement, Casters Wheels Etc. All Complete As Per Drawing, Specification And As Directed By Engineering In Charge All Complete. The Main Entrance Gate Shall Be Fabricated Out Of Mild Steel Sections Completed With Applying A Priming Coat Of Approved Steel Primer And Two Coats Of Synthetic Enamel Painting. The Structural Steel Works For Gates Shall Include Supply, Fabrication, Transportation, Erection Of Structural Steel Gates Complete With Placing In Position Embedded Parts In Concrete / Brickwork And In Road Surface Including Cutting, Grinding, Drilling Of Holes, Welding And Painting Etc Complete , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design. : , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge A) 110 Mm Dia , Supplying And Fixing Of Precast Reinforced Cement Concrete Slabs(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) At Site In Concrete Grade Of M-25 With 20 Mm Nominal Size Granitic Or Basaltic Aggregate, Consolidated By Means Of Mechanical Platform, Vibration Etc. With Lifting Hooks Of M.S. 10Mm Bars And Pvc Cups Including Cost Of Reincforcement, Certificate From Manufacturer Shall Be Produced Indicating Grade Of Concret And Minimum Content Of Steel In The Product Along With 5 Year Free Replacement Warranty In Case Of Breakage Complete And As Directed By Engineer -In -Charge. Size 900 X 400 X 100 Mm With Steel Reinforcement Not Less Than 5.0 Kgs Per Unit -12 T Capacity , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. A) Theming Work For Main Entrance Gate In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. B) Theming Work For Mahadev Big Mural In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. C) Theming Work For Nandi Kalash In Frp As Per Tender Drawing , Construction Of Deepstambh Of Reinforced Cement Concrete Pillar With Exposed Laterite Masonary Of Octagonal Shape (1500Mm Length Of Each Side And Total Height Of 5500Mm) With Openings For Placing Diya Lamps And Foundation Platform Of Size (1800Mm Length Of Each Side And Height Of 1500Mm) Including Molding,Etc. As Per The Detail Drawings And As Directed By Engineer In Charge. , Supplying And Stacking Of Good Earth ( Garden Soil) At Site Including Royalty And Carriage Upto 1 Km. (Earth Measured In Stacks Will Be Reduced By 20% For Payment). , Rough Dressing The Trenched Ground Including Breaking Clods. , Fine Dressing The Trenched Ground. , Spreading Of Sludge, Dung Manure Or/And Good Earth (Garden Soil) In Required Thickness (Cost Of Sludge, Dung Manure Or/And Good Earth To Be Paid Separately). , Supply At Site Of Work/Store Deoiled Neem Cake Duly Packed In Used Gunny Bags As Per Mort & H Specification 308.2 , Supplying Of Sludge Duly Stacked At Site/Store As Per Mort & H Specification 308.2 , Filling Mixture Of Earth & Sludge Or Manure In The Desired Proportion In Trenches Flooding With Water And Leveling (Cost Of Supplying Earth And Sludge Of Manure And Mixing Excluded). , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Bauhinia Purpurea , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Thevatia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Peltophorum Pterocarpum , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cordia Sebestena , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neem , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Rubra , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Foxtail Palms , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Callistemon (Bottlebrush Tree) , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Michelia Champaca , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cassia Fistula , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size (3.0 M To 4 M Ht.) Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Mimusops Elengi , Plumbing Works , Proving And Fixing White Vitreous China Wall Hung Type (European Type) Water Closet With Seat And Lid With C.I. Brass Hinges And Rubber Fittings With Flush Valve Nelson/ Similar Fully Chromium Plated With Stop Cock, Wall Flanges, Flush Pipe Or Elbow And Vaccum Breaker Coupling Etc. Including Chair Bracket/Rag Bolts, Cutting & Making Good The Walls And Floors Where Required And Concealed Seat Support - W.C. Pan With White Plastic Seat And Lid , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Two Way Bib Cock With Single Knob And Wall Flange Conforming To Is 8931:1993 15Mm Nominal Bore , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Large Lipped Front Urinal Basin Of 590X375x390mm Size With Urinal Valve Auto Closing System With Built In Control Cock & Wall Flange With Fittings, Spreader, R.S. Or C.I. Brackets, Standard Size C.P. Brassl Flush Pipe And Spreaders With C. P. Brass Unions & C. P. Brass Clamps With Waste Fitting As Per Is 2556, Pvc Trap With Outlet Grating And Other Couplings In Cp Brass Complete, Including Painting, Fittings, Cutting And Making Good The Walls And Floors Where Required. - Range Of One Urinal Basin , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75 Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Constructing Brick Masonry Manhole Or Inspection Chamber With Second Class Bricks In Cement Mortar 1:5 (1 Cement :5 Fine Sand) Reinforced Cement Concrete Top Slab With 1:2:4 Mix (1 Cement: 2 Coarse Sand ;4 Graded Stone Aggregate 20Mm Nominal Size Foundation Concrete 1:2:4 Mix (1 Cement ;2 Coarse Sand :4 Graded Stone Agrregate 40Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With A Floating Coat Of Neat Cemetn And Making Channels In Cement Concrete 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 90 X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455 X610mm Internal Dimensions Total Weight Of Cover Ad Frame To Be Not Less Than 38 Kg. (Weight Of Cover 23 Kg. ) , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:. 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 32Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Non-Return Valve Of Approved Quality : 40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality Low Pressure With Copper Floats 25 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 20 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 25Mm Outer Dia. , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc25 Mm , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete 150 Mm , Conveying Carefully From Stack At Site, 250M From Both Sides Rolling And Lowering Into Trenches, Laying And Jointing True To Line And Level, Reinforced Cement Concrete Spun Pressure And Non Pressure Pipes Of Various Classes, Specials Including Collar And Perfect Linking Of Joint With Jack To Correct Position Including Cost Of Jointing Material In Cement Mortar 1:2, Necessary Hydraulic Testing, Curing Of Cement Mortar Etc. Complete. 150 Mm , Providing And Fixing Angular Stop Cock With Wall Flangue - Jaquar Make. Florentine (Flr-5053N) 15Mm Of Approved Quality. , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701; 1996 1000 Lit. Capacity , Supply Of Inferential, Dry Dial, Type Domestic Water Meter,Suitable For Horizontal Installation, Duly, Sealed Against Tampering With Couplings At Both Ends Having Pulse Output Facility Compatable For Automatic Reading System ,Conforming To Is:779-1974 And Iso 4064-2005 Standards And Bearing Eec/Mid/Oiml Mark, (With Latest Amendments)Along With Test Certificate From Fcri/Nabl As Desired By The Department.25 Mm , Fixing Water Meter & Stop Cock In G. I. Pipe Line Including Cutting & Treading The Pipe And Making Long Screw Etc. Complete (Cost Of Water Meter And Stop Cock To Be Paid Separately) , Providing And Fixing Brass Bib Cock (Heavy) Of Approved Quality : 15 Mm Nominal Bore , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 60 To 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of Architectural Designed Pole Of 3Mtr Height Post Top Pole Made Of Galvanised Iron Sections Of 114Mm & 60Mm Dia. This Architecturally Designed Pole Is Structurally Sound. Windspeed Considered Should Be As Per Is875:Part 3:1987 ,Material For Tubes Steel Of Grade Yst210.,Material For Base Plate Steel Of Grade E250 To Is2062; 2011. The Pole Will Be Provided With An Inbuilt Junction Box To Fix 16-32Amp Connectors & 6-16Amp Mcb Inside The Cut Window Of The Bottom Pipe The Inbuilt Box Should Have A Flush Door Of Suitable Size With Allenkey Locking On Bothside. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 200X200mm Having 10Mm Thickness. The Base Plate Shall Have 4 Hole Suitable For M16/450 Foundation Bolts . The Galvanized Zinc Coat Should Not Be Less Than 65+/ 10Microns. The Galvanised Pole Should Be Painted In 3Layer Coating (Coating Thickness Should Not Be Than 80Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint With Overall 100 +/- 10 Microns. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of 40-50W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40-45W Led. Fitting Shall Be Post Top Mounting Type Fixture. System Wattage: 40-45W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply, Led Lumens:6000Lm, Cri(Ra):80, Led Colour Temperature: 4000K, Life Span:60,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv . Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Pf=0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70b50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-15 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -5 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And 3 Phase Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (A) 5 To 20 A , Supply Of 3 Kva 3 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing Following Way Spn Sheet Steel Mcb Distribution Board Consumer Unit 240 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Hinged Front Acrylic Cover For The Mcb Knobs Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (B) 2 + 8 Way Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. B) Dp, Cat A , Supplying And Fixing Following Rating Double Pole (Single Pole And Neutral) 240 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required (A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm(Ground To Db) , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying & Erecting Of Led 12W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A
Contract Date: Jul 02, 2026 Contract Value : ₹ 3.70 Crore
Government Departments No of Bidders 2
Goa View Result →
6.
Public Administrative Department #11099960 AOC
To Carry Out Various Development Works Related To Electricity At Raje Ch. Shivaji Maharaj Udyan, Vadgaonsheri.-ITEM NO : 1 GRP Pole 7 mtr Height conical shape made by Computer Numerical Controlled Filament Winding Machine using thermoset Resin (with Fire retardant and UV properties) having 62-65% glass content in one-piece, Top OD-101?1, Bottom OD-194+-1 , Avg. Pole thk: 8mm +-0.5mm. Specific Gravity (Ref Spec ASTM D 792): 1.5-1.8 gm/cm^3, Water absorption(Ref Spec ASTM D 570): <0.5%, Tensile Strength(Ref Spec ASTM D 4923): 250?50 MPa, Flextural Strength(Ref Spec ASTM D 790): 250?50 MPa, Deflection max 10% (Ref Spec ASTM D 4923) @50 kg load, Paint film thk 80-100 Micron. Two coats of UV PU Paint is must .colour as per Engineer in charge instructions.GRP Base Plate Round-350 mm Thk 18mm, PCD 270?1, Slot hole 4-18(mm)+-0.05(mm) and GRP cylindrical insert part 350 mm +-1 fitted with Pole by 8 Nos SS 304 Bolts at time of Filament winding process. Internal Junction Box (1 no. 1-1.5A SP MCB & 1 no 4 Way Connector fitted on Din rail) @ height 1000mm.Cover to be provided with Neoprene Rubber. Provision for overhead service cable - 15 mm Two round holes 180 Degree apart to be provided at 700 mm from top of pole. Rubber Grommet to be provided for both holes to avoid water ingress (if required) ( SSR Item No : 5.05 ) (PMC NON-DSR ) Unique No (03052304) Rate List Year (2023-2024) ITEM NO : 2 FRP Single arm 1/1.5 MtrBracket with SS Nut Bolts. (As per Attached Specifications) ( SSR Item No : 3 ) (PMC NON-DSR ) Unique No (06042304) Rate List Year (2023-2024) ITEM NO : 3 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). ( SSR Item No : 16.03-09 ) (PMC Electrical ) Unique No (5465) Rate List Year (2023-2024) ITEM NO : 4 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV ( SSR Item No : 1.03-14 ) (PMC Electrical ) Unique No (3549) Rate List Year (2023-2024) ITEM NO : 5 Erecting departmentally supplied LED street light/ flood light fitting above 80 to 150W . ( SSR Item No : 2.04-25 ) (PMC Electrical ) Unique No (3886) Rate List Year (2023-2024) ITEM NO : 6 Supplying, erecting & terminating armoured cable 4 core 6 sq. mm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( SSR Item No : 7.13 ) (PMC Electrical ) Unique No (4682) Rate List Year (2023-2024) ITEM NO : 7 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. ( SSR Item No : 7.06-09 ) (PMC Electrical ) Unique No (6909) Rate List Year (2023-2024) ITEM NO : 8 For 7m / 8m Pole: - Disconnecting cable / service wore, removing of junction box and fitting with bracket safely on ground and removal of pole. ( SSR Item No : 23.04 ) (PMC Electrical ) Unique No (6781) Rate List Year (2023-2024) ITEM NO : 9 For 9m / 10m Pole: - Disconnecting cable / service wore, removing of junction box and fitting with bracket safely on ground and removal of pole. ( SSR Item No : 23.05 ) (PMC Electrical ) Unique No (6782) Rate List Year (2023-2024) ITEM NO : 10 Transporting pole from one place to other as per instructions. ( SSR Item No : 23.02 ) (PMC Electrical ) Unique No (6779) Rate List Year (2023-2024) ITEM NO : 11 Supplying and erecting blanking plate of suitable size on MCBDB. ( SSR Item No : 5.04-14 ) (PMC Electrical ) Unique No (4385) Rate List Year (2023-2024) ITEM NO : 12 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( SSR Item No : 5.03-01 ) (PMC Electrical ) Unique No (4346) Rate List Year (2023-2024) ITEM NO : 13 Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. ( SSR Item No : 2.01-05 ) (PMC Electrical ) Unique No (3818) Rate List Year (2023-2024) ITEM NO : 14 Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-06 ) (PMC Electrical ) Unique No (3867) Rate List Year (2023-2024) ITEM NO : 15 Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-16 ) (PMC Electrical ) Unique No (3877) Rate List Year (2023-2024)
Contract Date: May 15, 2026 Contract Value : ₹ 7.61 Lakh
Local Bodies No of Bidders 2
Maharashtra View Result →
7.
Tourism #11099606 AOC
Tender For Civil Works , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directedwithin A Lead Of 50M.All Kinds Of Soil , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing And Laying In Position Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 40 M Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing : All Works Upto Plinth Level , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For :Foundations, Footings, Bases For Columns , Providing And Laying In Position Ready Mixed Concrete (Rmc) With Usage Of Ordinary Portland Cement Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level. M-20 Grade Of Concrete , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Electrical Work , Supply Of 6M Decorative Single Arm Cameroon Pole With 72W Sabik Ø480mm Crown Tm Pc:- 6M Height Designer Decorative Single Arm Pole Made In Combination Of Steel Pipe Which Is Fabricated Using 114 Mm(+/-3%)Dia Grooved Pipe X 4Mm Thick Base Section With Minimum Height Of 2000Mm. The Pole Is To Be Provided With A Surface Mounting Suitable Base Plate Dia Of 350 Mm And Suitable Thickness As Per Is Standards And Structural Reports. Decorative Knob On The Top Is Made Of Cast Aluminium In Single Piece Of Minimum Height 360Mm. The Pole Should Be Provided With An Inbuilt Junction Box To Fix Four-Way Connector And 6A Mcb At The Bottom - The Inbuilt Box Should Have A Flush Door Of Suitable Size. The Decorative Pedestal To Be Mounted On A Suitable Size Steel Plate. The Pole Shall Be Hot Dip Galvanized. . The Suitable Size Foundation Bolt Shall Be Supply Along With The Pole Of En 8 Grade. The Manufacturer Needs To Provide A Structural Analysis For Structural Stability Of The Pole With The Relevant Is Standards Is 1239/1161/E250 Needs To Be Clearly Mentioned. The Same Needs To Be Confirmed In Form Of Test Certificates From The Manufacturer. Internal Wiring Backelite Sheet And Mcb Included Please Refer The Attached Drawing No - Cameroon 6M Sa Tm Pole. Including 72W Post Top Fixture Suitable To Mount 72W ± 10% With Mcpcb Of Not Less Than 1.6 Mm Thickness And Cu Of 35 Microns And 2.5 Thermal Conductivity For Fixture. The Led Used Should Be High Power Epoxy Leds (Make- Osram/Bridgelux/Nichia/Cree) With Macadam /= 5 And Cri /= 70 And Cct 4000K. The Luminaire Should Have System Efficacy (Lumens/Watt) 110 Lumens/Watt. The Luminaire Should Be Having A Warranty For A Period Of 5 Years Against Any Manufacturing Defects. The Manufacturer Should Have Internal Testing Equipments Especially 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturer Shall Submit The Lm 80 Report For Led Used In The Fixtures. Similar To Model No. Sabik Ø480mm Crown Tm Pc Clear Sl. The Luminaire Should Be Rohs Compliant As Per Government Notification And With A Valid Bis Number. Luminaire Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Street Light Panel: Supply Installation Testing And Commissioning Of Lt Panel Ip- 67 Outdoor Type,Floor Mounted Panel, Shall Be Suitable For 415 V, 3 Phase, 4 Wire, 50Hz Supply System. With 3 Phase Energy Meter And 63A Tpn Mcb As Incommer And 11 Nos Of 16 A Tpn Mcb As Outgoing With 3 Numbers Of Microcontoller Based 25 A Programmable Digital Almac Timer As Directed By Engineer In-Charge. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 36W And System Lumen Output Of Not Less Than 2910 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make: Reytek, Leksa, La-Lumirie,Phillips,Havells As Directed By The Engineer Incharge. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 18W And System Lumen Output Of Not Less Than 1490 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 500Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 12W And System Lumen Output Of Not Less Than 980 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 36W And System Lumen Output Of Not Less Than 3020 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate.Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 18W And System Lumen Output Of Not Less Than 1550 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate. Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of Static White 3000K Neon Flex With Diffused And Homogenous Light Suitable For Outdoor Applications Of Façade Lighting. Silicon Extrusion Flexible Tubes With Side Bending Option. Silicon Extrusion Technology Having Advanced Process, With High-Efficiency Production Capacity And Environmentally-Friendly Characteristics. Additionally, With High Grade Appearance, Soft Bend Flexibility, Strong Impact Resistant And High Weather Resistance. Uniform, Dot-Free And Smooth Lighting Performance Up To 5M. On Field Cuttable And Assembly, With Endcap Sealed By Gluing Process. Power Consumption Should Be Between 12~14W/M And Have Atleast 120 Leds Per Meter With 120° Beam Angle. Ingress Protection Should Be Ip 67. And Ik Rating Ik07. Size 10Mm X20mm Side Bend. Dimmable Available With Pwm Signal. Operating Temperature: -10°C To 45°C. The Fixture Shall Have Input Voltage For 24V Dc, With External High Efficiency Driver Having Power Factor 0.90, Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided. The Lumen Maintenance L70@ 25 °C Of The Led Shall Not Be Less Than 70% Of The Initial Lumen After 30,000 Burning Hours, With Suitable Aluminium Mounting Profile. * Power Supply: Dc 24V * Operating Temperature Range: -10°C To +45°C * Led Make: Cree/ Osram/ Lumiled/ Seoul/ Nichia/Sanan/Epistar Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Installation Testing And Commissioning Of Smart Lighting Panel , Supplyof 3M Decorative Single Arm Cameroon Pole With 72W Sabik Ø480mm Crown Tm Pc:- 6M Height Designer Decorative Single Arm Pole Made In Combination Of Steel Pipe Which Is Fabricated Using 114 Mm(+/-3%)Dia Grooved Pipe X 4Mm Thick Base Section With Minimum Height Of 2000Mm. The Pole Is To Be Provided With A Surface Mounting Suitable Base Plate Dia Of 350 Mm And Suitable Thickness As Per Is Standards And Structural Reports. Decorative Knob On The Top Is Made Of Cast Aluminium In Single Piece Of Minimum Height 360Mm. The Pole Should Be Provided With An Inbuilt Junction Box To Fix Four-Way Connector And 6A Mcb At The Bottom - The Inbuilt Box Should Have A Flush Door Of Suitable Size. The Decorative Pedestal To Be Mounted On A Suitable Size Steel Plate. The Pole Shall Be Hot Dip Galvanized. . The Suitable Size Foundation Bolt Shall Be Supply Along With The Pole Of En 8 Grade. The Manufacturer Needs To Provide A Structural Analysis For Structural Stability Of The Pole With The Relevant Is Standards Is 1239/1161/E250 Needs To Be Clearly Mentioned. The Same Needs To Be Confirmed In Form Of Test Certificates From The Manufacturer. Internal Wiring Backelite Sheet And Mcb Included Please Refer The Attached Drawing No - Cameroon 6M Sa Tm Pole. Including 72W Post Top Fixture Suitable To Mount 72W ± 10% With Mcpcb Of Not Less Than 1.6 Mm Thickness And Cu Of 35 Microns And 2.5 Thermal Conductivity For Fixture. The Led Used Should Be High Power Epoxy Leds (Make- Osram/Bridgelux/Nichia/Cree) With Macadam /= 5 And Cri /= 70 And Cct 4000K. The Luminaire Should Have System Efficacy (Lumens/Watt) 110 Lumens/Watt. The Luminaire Should Be Having A Warranty For A Period Of 5 Years Against Any Manufacturing Defects. The Manufacturer Should Have Internal Testing Equipments Especially 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturer Shall Submit The Lm 80 Report For Led Used In The Fixtures. Similar To Model No. Sabik Ø480mm Crown Tm Pc Clear Sl. The Luminaire Should Be Rohs Compliant As Per Government Notification And With A Valid Bis Number. Luminaire Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Installation Testing And Commissioning Of Junction Box Including Terminations Of Size 130 X130 X 77 Mm Of Make Hensel , Charges For Installation Testing And Commissioning Of All Light Fixtures Of Façade Illumination Of Shantadurga Temple And Mahamaya Temple. , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core25sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 2.5 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core10sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required.(A) In Soily Strata , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Supply And Making Cable End Terminations With Compression Gland And Aluminium Lugs For Following Sizes Of Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. (4) 2 X 10Sq.Mm , Supply And Making Cable End Terminations With Compression Gland And Aluminium Lugs For Following Sizes Of Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. (6) 2 X 25Sq.Mm , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark,Of Approved Brands, Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. With Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs. D) Refilling The Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe. G)Watering Arrangement(Plumbing Will Be Paid Seperately).(A) In Soily Strata , Supplying And Laying 25 Mm X 5 Mm Gi Strip In 40 Mm Dia Gi Pipe From Earth Electrode As Required , Supply, Installation, Testing & Commissioning Of Diesel Generator Set 25Kva @20 Kwe With Volvo Eicher Engine, Canopy Made Of Composite Polymer-Based Material, Glass Reinforced Polymer (Grp) Acoustic Enclosure Which Can Be Recycled When Replaced Having Canopy Dimension Of 2825X1090x1425mm (Lxwxh) With Total Canopy Weight Not Exceeding 900Kg. Output Continuous Rating 3 Ph, 415V, 50 Hz 0.8 P. F A.C Supply. A Totally Enclosed Water Cooled 4-Cylinder Engine Developing 38 Bhp At 1500 Rpm With 10% Overload For 1Hour In 12 Hours. The Generator Canopy Shall Be Of Non-Metallic, Non-Rusting I.E. Corrosion Free, Weatherproof, Material Suitable For Coastal And High Humidity Conditions. The Dg Set Shall Comply With Cpcb Iv+ Noise Norm With Sound Absorbing Material To Restrict Sound Level Up To 75Db At 1.0M With The Silencer Positioned Inside The Canopy. The Canopy Shall Maintain Certified Sound Level For Minimum Of 15 Years. The Inbuilt Tank Fuel Capacity At 85 Litres & Maximum Fuel Consumption 5.3 Ltr/ Hr @ 75% Loading. The Generator & Panel Canopy Material Shall Contain Fire Resistant, Additives With Self -Extinguishing And Non -Conductive Properties. The Controller Should Be Fixed In Grp Panel Box Having Metal Hinges With Ss Finish Should Be Welded From Inside Of Box Size Of 650X450x200mm With Box Having Powder Coated In Ral9001 Mounted At Rear Side At Height Of 954Mm From Ground Level. The Dg Should Come With Low Vibration As Per Is8528 Part 9 & Should Be Aesthetically Pleasing In Colour Combination Of White & Anthracite Grey For Canopy With Ral9001 -Ral 7016 Respectively With Base Frame Size Of 285Mm Made Up Of 2.5Mm Thickness In Ral 9005 Maintaining 2 Coat Of Primer & 1 Coat Of Painting Process Thickness 80Microns. All The Painting Shall Be Done By Qualified Painters. Reference To Cat No- Grp Pkgvef-Iv25 Paikane Make Or Equivalent. , Supplying And Erecting Outdoor Type 5 To 7 W Led Focus Light Fitting Complete With Ip67, 24Vdc, 60W Driver, / Power Supply (If Any), Connecting Wire, Including Gear Box And Junction Box For Cable Connectionwith All Necessary Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Beam Angle Requirement As Per Gtdc With 3000K Cct Of Suitable Make Wipro,Legero,Bajaj,Jaquar,Vin Led,K-Lite,Philips Complete With All Required Accessories . , Supplying And Erecting 15 W Wall/Column-Mounted Rectangular Type Led Downlight Ip 65 Having Extruded And Die Cast Aluminium Housing With High Corrosion Resistance Surface Finish With Integral Control Gear And Beam Angles - Narrow, Medium, Wide ,With 3000K Cct Of Suitable Make Wipro,Legero,Bajaj,Jaquar,Vin Led,K-Lite,Philips. Complete With All Required Accessories . , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 40W And System Lumen Output Of Not Less Than 3250 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make: Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 24W And System Lumen Output Of Not Less Than 1950 Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Linear Wall Washer In 1000Mm Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Extruded Aluminium Alloy With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots To Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage Not Exceeding 15W And System Lumen Output Of Not Less Than 1180Lumens, Beam Angle Should Be 10X60 /15X45/25 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 24V Dc, Provided With External High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver. Luminaire Complying To Bis Standard Is 10322 ,Color Temperature : 3000K, Cri80,, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd Led Chips. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturere Shall Submit The Lm79 & Lm 80 Report Along With The Supply Of Material Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 40W And System Lumen Output Of Not Less Than 3320 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate.-Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 24W And System Lumen Output Of Not Less Than 1950 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of High Quality Static White (3000K) Floodlight Projector Having Precies Beam Angle As Per Design Or Site Requirement Suitable For Façade Lighting Applications. Housing To Be Made Of Pressure Die-Cast Aluminium With Excellent Heat Management System To Ensure Proper Heat Dissipation And Thermal Stability Of The Luminaire. The Luminaire Shall Have Electrostatically Applied Polyester Powder Coating Finish. Luminaire Shall Be Suitable To Operate In A Temperature Range Of -10°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25°C. The Lens Shall Be Made Of Anti-Aging & Anti Uv-Pmma/Pc Material And Able To Minimize Hot Spots & Insure Proper Light Distribution. Suitable For Outdoor Weather Proof Conditions Having Ip66 Ingress Protection. Transparent Toughened Glass Having Impact Resistance Protection Of Ik08. The Luminaire Shall Have System Wattage 12W And System Lumen Output Of Not Less Than 1550 Lumens, Beam Angle Should Be Narrow : 15/25/40 Degree/As Per Site Condition, The Fixture Shall Have Input Voltage Of 240V Ac, Provided With Internal High Efficiency Driver Operating On 240V Ac, Power Factor 0.90 @ Full Load, Internal Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided In The Driver Complying To Bis Standard Is 10322 ,Color Temperature : 3000K Cri 70, Operating Temperature : -10°C To +50°C, Operating Humidity : 10%-90%, Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia, Bridgelux To Insure Higher Lumen Output And Brightness With Smd/Cob Led Chips. The Successful Bidder Shall Submit The Product Data Sheets, Lm80 Report Issued By Led Manufacturer Along With The Bis Certificate.Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supply Of Static White 3000K Neon Flex With Diffused And Homogenous Light Suitable For Outdoor Applications Of Façade Lighting. Silicon Extrusion Flexible Tubes With Side Bending Option. Silicon Extrusion Technology Having Advanced Process, With High-Efficiency Production Capacity And Environmentally-Friendly Characteristics. Additionally, With High Grade Appearance, Soft Bend Flexibility, Strong Impact Resistant And High Weather Resistance. Uniform, Dot-Free And Smooth Lighting Performance Up To 5M. On Field Cuttable And Assembly, With Endcap Sealed By Gluing Process. Power Consumption Should Be Between 10~14W/M And Have Atleast 120 Leds Per Meter With 120° Beam Angle. Ingress Protection Should Be Ip 67. And Ik Rating Ik07. Size 10Mm X20mm Side Bend. Dimmable Available With Pwm Signal. Operating Temperature: -10°C To 45°C. The Fixture Shall Have Input Voltage For 24V Dc, With External High Efficiency Driver Having Power Factor 0.90, Surge Protection 4Kv And Other Protections Including Ocp, Ovp, Scp, Otp Shall Be Provided. The Lumen Maintenance L70@ 25 °C Of The Led Shall Not Be Less Than 70% Of The Initial Lumen After 30,000 Burning Hours, With Suitable Aluminium Mounting Profile. * Power Supply: Dc 24V * Operating Temperature Range: -10°C To +45°C * Led Make: Cree/ Osram/ Lumiled/ Seoul/ Nichia/Sanan/Epistar Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Supplyof Decorative Post Top Led Luminaire Is Designed With A Robust Die-Cast Aluminium Housing And A Clear Injection Moulded Polycarbonate Diffuser,Ensuring Long Life And Durability Against Outdoor Environmental Conditions. It Features An Ingress Protection Rating Of Ip65 And An Impact Resistance Of Ik08, Making It Both Dust-Tight And Resistant To Heavy Impacts. The Luminaire Is Aesthetically Designed With An Overall Diameter Of 460 Mm And A Height Of 785 Mm, And It Is Suitable For Mounting On A Ø 60 Mm Pole Pipe. Top Cover Made Of Spun Aluminium With Decorative Knob On Top Made Of Die Cast Aluminium As Shown In The Drawing For Unique And Better Aesthetics. The Luminaire Should Have Effective Heatsink For Thermal Management For Longer Life Of The Leds. The Luminaire Shall Be Provided With Type V Optics To Provide Uniform Photometric Distribution Suitable For Typical 360 Degree Illumination And Facilitate Minimum Glare, With Degree Of Protection As Ip65 Lamp Compartment. The Design Of The Fixture Has To Be The Same Aesthetics As Shown In The Drawing. The System Ac Wattage Of The Luminaire Shall Be 45W (± 10%) With Mcpcb Of Not Less Than 1.6 Mm Thickness And Cu Of 35 Microns And 2.5 Thermal Conductivity For Fixture. Colour Temperature (Cct) Of 3000K, Colour Rendering Index Cri /= 70 And Residual Flux Of 70% (L70) @ 50,000 Hours At Ta Of 25°C. The Luminaire Shall Be Suitable For Operating Within Temperature Range From - 10°C To + 45°C. The Led Used Should Be High Power Leds (Make- Osram/Bridgelux/Nichia/Cree/Lumiled) With Macadam /= 5. The Luminaire Should Be Designed To Operate At Any Voltage From 140V To 280V, With Power Factor = 0.95 And Shall Be Provided With Optional Built In Over Voltage And Under Voltage Protection And Internal Surge Protection Of 4/4 Kv In Both Common & Differential Modes And External Surge Protection Of 10 Kv, Electrical Class I. The Driver Arrangement Should Be Such That It Can Be Easily Maintained Without Opening The Ip65 Lamp Compartment. All The Mounting Hardware Shall Be Ss304/316 Grade For Better Life. The Luminaire Shall Comply With Safety Requirements Of Applicable Bis Standard And The Bidder Shall Submit A Copy Of Valid Bis Certificate. Overall Outer Dimensions Of Luminaire Shall Be Ø460mm (±3%) And 785Mmh (±3%) Height And The Shape Shall Be As Per The Sketch Attached Herewith. The Luminaire Should Be Having A Warranty For A Period Of 5 Years Against Any Manufacturing Defects. The Manufacturer Should Have Valid Iso 9001:2015. The Manufacturer Should Have Internal Testing Equipments Especial 2M Integrating Sphere, Ipx6, Ik10, Humidity Chamber. The Manufacturer Shall Submit The Lm 80 Report Along With The Tender. Similar To Model No. Columba Pt 45W Opal Led 30K . The Luminaire Should Be With A Valid Bis Number. Make Reytek, Suncity, K-Lite, Dwarka Casting, Havells As Directed By The Engineer Inchrage. , Charges For Installation Testing And Commissioning Of All Light Fixtures Of Poles And Compund Lights Of Kelbai Temple.
Contract Date: May 31, 2026 Contract Value : ₹ 2.23 Crore
Government Departments No of Bidders 3
Goa View Result →
8.
Public Administrative Department #11095680 AOC
Undertaking Electrical Improvement Works In Various Parks In Sihagad Road Regional Office Under Deputy Commissioner No. 3-ITEM NO : 1 GRP Pole 5 mtr Height conical shape made by Computer Numerical Controlled Filament Winding Machine using thermoset Resin (with Fire retardant and UV properties) having 62-65% glass content in one-piece, Top OD-99?1, Bottom OD-165+-1 , Avg. Pole thk: 8mm +-0.5mm. Specific Gravity (Ref Spec ASTM D 792): 1.5-1.8 gm/cm^3, Water absorption(Ref Spec ASTM D 570): <0.5%, Tensile Strength(Ref Spec ASTM D 4923): 250?50 MPa, Flextural Strength(Ref Spec ASTM D 790): 250?50 MPa, Deflection max 10% (Ref Spec ASTM D 4923) @50 kg load, Paint film thk 80-100 Micron. Two coats of UV PU Paint is must .colour as per Engineer in charge instructions.GRP Base Plate Round-325 mm Thk 16mm, PCD 250?1, Slot hole 4-18(mm)+-0.05(mm) and GRP cylindrical insert part 350 mm fitted with Pole by 8 Nos SS 304 Bolts at time of Filament winding process. Internal Junction Box (1 no. 1-1.5A SP MCB & 1 no 4 Way Connector fitted on Din rail) @ height 1000mm.Cover to be provided with Neoprene Rubber. Provision for overhead service cable - 15 mm Two round holes 180 Degree apart to be provided at 700 mm from top of pole. Rubber Grommet to be provided for both holes to avoid water ingress (if required) ( SSR Item No : 3.03 ) (PMC NON-DSR ) Unique No (03052302) Rate List Year (2023-2024) Work ID : E9_2025_P36963_DEW Page 2 of 8 Budget Code: ITEM NO : 2 GRP Pole 6 mtr Height conical shape made by Computer Numerical Controlled Filament Winding Machine using thermoset Resin (with Fire retardant and UV properties) having 62-65% glass content in one-piece, Top OD-100?1, Bottom OD-180+-1 , Avg. Pole thk: 8mm +-0.5mm. Specific Gravity (Ref Spec ASTM D 792): 1.5-1.8 gm/cm^3, Water absorption(Ref Spec ASTM D 570): <0.5%, Tensile Strength(Ref Spec ASTM D 4923): 250?50 MPa, Flextural Strength(Ref Spec ASTM D 790): 250?50 MPa, Deflection max 10% (Ref Spec ASTM D 4923) @50 kg load, Paint film thk 80-100 Micron. Two coats of UV PU Paint is must colour as per Engineer in charge instructions.GRP Base Plate Round-325+-1 mm Thk 16mm, PCD 250?1, Slot hole 4-18(mm)+-0.05(mm) and GRP cylindrical insert part 350 mm +-1 fitted with Pole by 8 Nos SS 304 Bolts at time of Filament winding process. Internal Junction Box (1 no. 1-1.5A SP MCB & 1 no 4 Way Connector fitted on Din rail) @ height 1000mm.Cover to be provided with Neoprene Rubber. Provision for overhead service cable - 15 mm Two round holes 180 Degree apart to be provided at 700 mm from top of pole. Rubber Grommet to be provided for both holes to avoid water ingress (if required) SSR Item No : 4.04 ) (PMC NON-DSR ) Unique No (03052303) Rate List Year (2023-2024) ITEM NO : 3 FRP Single arm 1/1.5 MtrBracket with SS Nut Bolts. (As per Attached Specifications) SSR Item No : 3 ) (PMC NON-DSR ) Unique No (06042304) Rate List Year (2023-2024) ITEM NO : 4 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). SSR Item No : 16.03-08 ) (PMC Electrical ) Unique No (5464) Rate List Year (2023-2024) ITEM NO : 5 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). SSR Item No : 16.03-09 ) (PMC Electrical ) Unique No (5465) Rate List Year (2023-2024) ITEM NO : 6 Supplying and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM with speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 Volts single phase, 50 cycles A.C. supply, with one meter of 3 core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation. ( SSR Item No : 2.10-05 ) (PMC Electrical ) Unique No (3955) Rate List Year (2023-2024) ITEM NO : 7 Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary. ( SSR Item No : 2.08-14 ) (PMC Electrical ) Unique No (3937) Rate List Year (2023-2024) ITEM NO : 8 35W-45W-65W- Led light Repair (Replacement of Driver /Mcpcb as Applicable & Two years warranty for work). ( SSR Item No : 20.17-536 ) (PMC Electrical ) Unique No (6659) Rate List Year (2023-2024) ITEM NO : 9 Supplying and erecting mains with WP 4 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. ( SSR Item No : 1.04-07 ) (PMC Electrical ) Unique No (3558) Rate List Year (2023-2024) ITEM NO : 10 Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF ( SSR Item No : 2.10-03 ) (PMC Electrical ) Unique No (3953) Rate List Year (2023-2024) ITEM NO : 11 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW ( SSR Item No : 1.07-20 ) (PMC Electrical ) Unique No (3653) Rate List Year (2023-2024) ITEM NO : 12 ITEM NO : 13 Supply of cast iron Decorative pole RLP-100-50 90(Height 4950mm) 285Kg ( SSR Item No : 20.17-330 ) (PMC Electrical ) Unique No (6453) Rate List Year (2023-2024) ITEM NO : 14 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( SSR Item No : 5.03-01 ) (PMC Electrical ) Unique No (4346) Rate List Year (2023-2024) ITEM NO : 15 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV ( SSR Item No : 1.03-14 ) (PMC Electrical ) Unique No (3549) Rate List Year (2023-2024) ITEM NO : 16 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. ( SSR Item No : 7.06-09 ) (PMC Electrical ) Unique No (6909) Rate List Year (2023-2024) ITEM NO : 17 Supplying, erecting & terminating armoured cable 4 core 50 sq. mm. complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( SSR Item No : 7.18 ) (PMC Electrical ) Unique No (4687) Rate List Year (2023-2024) ITEM NO : 18 Supplying, erecting & terminating armoured cable 4 core 6 sq. mm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( SSR Item No : 7.13 ) (PMC Electrical ) Unique No (4682) Rate List Year (2023-2024) ITEM NO : 19 Supply & installation of cast Alum.Decorative 30W LED Fitting .Make-Dwarka Castings,Gopi Intricast,Pooja Industries ( SSR Item No : 1.02 ) (PMC NON-DSR ) Unique No (28081702) Rate List Year (2022-2023) ITEM NO : 20 For 7m / 8m Pole: - Disconnecting cable / service wore, removing of junction box and fitting with bracket safely on ground and removal of pole. ( SSR Item No : 23.04 ) (PMC Electrical ) Unique No (6781) Rate List Year (2023-2024) ITEM NO : 21 Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-16 ) (PMC Electrical ) Unique No (3877) Rate List Year (2023-2024) ITEM NO : 22 Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. ( SSR Item No : 2.01-05 ) (PMC Electrical ) Unique No (3818) Rate List Year (2023-2024) ITEM NO : 23 Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22 / E-􀀀27 base ( SSR Item No : 2.08-13 ) (PWD-PUNE-ELECTRICAL ) Unique No (284761) Rate List Year (2022-2023) ITEM NO : 24 Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-04 ) (PMC Electrical ) Unique No (3865) Rate List Year (2023-2024) ITEM NO : 25 Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-06 ) (PMC Electrical ) Unique No (3867) Rate List Year (2023-2024) ITEM NO : 26 Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW ( SSR Item No : 1.03-02 ) (PMC Electrical ) Unique No (3537) Rate List Year (2023-2024) ITEM NO : 27 Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW ( SSR Item No : 1.07-21 ) (PMC Electrical ) Unique No (3654) Rate List Year (2023-2024) ITEM NO : 28 Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. ( SSR Item No : 2.10-13 ) (PMC Electrical ) Unique No (3963) Rate List Year (2023-2024) ITEM NO : 29 Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( SSR Item No : 5.03-02 ) (PMC Electrical ) Unique No (4347) Rate List Year (2023-2024) ITEM NO : 30 Supplying, erecting & marking SPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( SSR Item No : 5.03-04 ) (PMC Electrical ) Unique No (4349) Rate List Year (2023-2024) ITEM NO : 31 Supplying and erecting PVC Surface modular double mounting plate 3 module complete duly erected. ( SSR Item No : 1.06-48 ) (PMC Electrical ) Unique No (3623) Rate List Year (2023-2024) ITEM NO : 32 Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. ( SSR Item No : 1.06-08 ) (PMC Electrical ) Unique No (3583) Rate List Year (2023-2024) ITEM NO : 33 Supplying, erecting & terminating armoured cable 4 core 10 sq. mm. complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL SSR Item No : 7.14 ) (PMC Electrical ) Unique No (4683) Rate List Year (2023-2024) ITEM NO : 34 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP SSR Item No : 9.01-04 ) (PMC Electrical ) Unique No (4907) Rate List Year (2023-2024) ITEM NO : 35 Supplying & erecting FRP box of size 300mm x 200mm x 125 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB SSR Item No : 7.08-10 ) (PMC Electrical ) Unique No (6940) Rate List Year (2023-2024) ITEM NO : 36 PRP shock proof junction box cover for octagonal pole with PMC embossed and two ribs of size 76mmx10mmx6mm for additional rigidity and stiffness. SSR Item No : 20.17-163 ) (PMC Electrical ) Unique No (6286) Rate List Year (2023-2024) ITEM NO : 37 Providing Fiber Reinforced Plastic Insulation for Streetlight Pole by applying 3mm thick FRP coat comprising of Primium quality resin,Plastic matt (450E),hardener, cobalt, color pigment complete with jell coat to give the profile resin-rich surface and enhance the appearance of the FRP coat.Before applying FRP coat insure that the surface should be moisture free and clean it by polish paper SSR Item No : 1 ) (PMC NON-DSR ) Unique No (21012501) Rate List Year (2024-2025) ITEM NO : 38 Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. SSR Item No : 1.04-03 ) (PMC Electrical ) Unique No (3554) Rate List Year (2023-2024) ITEM NO : 39 Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. ( SSR Item No : 6.01.01 ) (PMC Electrical ) Unique No (4539) Rate List Year (2023-2024)
Contract Date: May 14, 2026 Contract Value : ₹ 14.40 Lakh
Local Bodies No of Bidders 5
Maharashtra View Result →
9.
Public Administrative Department #11095679 AOC
Under Deputy Commissioner No. 3, Electrical Improvement Works Are Being Carried Out In Various Parks In Warje Karvenagar Regional Office.-ITEM NO : 1 GRP Pole 5 mtr Height conical shape made by Computer Numerical Controlled Filament Winding Machine using thermoset Resin (with Fire retardant and UV properties) having 62-65% glass content in one-piece, Top OD-99?1, Bottom OD-165+-1 , Avg. Pole thk: 8mm +-0.5mm. Specific Gravity (Ref Spec ASTM D 792): 1.5-1.8 gm/cm^3, Water absorption(Ref Spec ASTM D 570): <0.5%, Tensile Strength(Ref Spec ASTM D 4923): 250?50 MPa, Flextural Strength(Ref Spec ASTM D 790): 250?50 MPa, Deflection max 10% (Ref Spec ASTM D 4923) @50 kg load, Paint film thk 80-100 Micron. Two coats of UV PU Paint is must .colour as per Engineer in charge instructions.GRP Base Plate Round-325 mm Thk 16mm, PCD 250?1, Slot hole 4-18(mm)+-0.05(mm) and GRP cylindrical insert part 350 mm fitted with Pole by 8 Nos SS 304 Bolts at time of Filament winding process. Internal Junction Box (1 no. 1-1.5A SP MCB & 1 no 4 Way Connector fitted on Din rail) @ height 1000mm.Cover to be provided with Neoprene Rubber. Provision for overhead service cable - 15 mm Two round holes 180 Degree apart to be provided at 700 mm from top of pole. Rubber Grommet to be provided for both holes to avoid water ingress (if required) ( SSR Item No : 3.03 ) (PMC NON-DSR ) Unique No (03052302) Rate List Year (2023-2024)ITEM NO : 2 GRP Pole 6 mtr Height conical shape made by Computer Numerical Controlled Filament Winding Machine using thermoset Resin (with Fire retardant and UV properties) having 62-65% glass content in one-piece, Top OD-100?1, Bottom OD-180+-1 , Avg. Pole thk: 8mm +-0.5mm. Specific Gravity (Ref Spec ASTM D 792): 1.5-1.8 gm/cm^3, Water absorption(Ref Spec ASTM D 570): <0.5%, Tensile Strength(Ref Spec ASTM D 4923): 250?50 MPa, Flextural Strength(Ref Spec ASTM D 790): 250?50 MPa, Deflection max 10% (Ref Spec ASTM D 4923) @50 kg load, Paint film thk 80-100 Micron. Two coats of UV PU Paint is must colour as per Engineer in charge instructions.GRP Base Plate Round-325+-1 mm Thk 16mm, PCD 250?1, Slot hole 4-18(mm)+-0.05(mm) and GRP cylindrical insert part 350 mm +-1 fitted with Pole by 8 Nos SS 304 Bolts at time of Filament winding process. Internal Junction Box (1 no. 1-1.5A SP MCB & 1 no 4 Way Connector fitted on Din rail) @ height 1000mm.Cover to be provided with Neoprene Rubber. Provision for overhead service cable - 15 mm Two round holes 180 Degree apart to be provided at 700 mm from top of pole. Rubber Grommet to be provided for both holes to avoid water ingress (if required) SSR Item No : 4.04 ) (PMC NON-DSR ) Unique No (03052303) Rate List Year (2023-2024) ITEM NO : 3 FRP Single arm 1/1.5 MtrBracket with SS Nut Bolts. (As per Attached Specifications) SSR Item No : 3 ) (PMC NON-DSR ) Unique No (06042304) Rate List Year (2023-2024) ITEM NO : 4 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). SSR Item No : 16.03-08 ) (PMC Electrical ) Unique No (5464) Rate List Year (2023-2024) ITEM NO : 5 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). SSR Item No : 16.03-09 ) (PMC Electrical ) Unique No (5465) Rate List Year (2023-2024) ITEM NO : 6 Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary. ( SSR Item No : 2.08-14 ) (PMC Electrical ) Unique No (3937) Rate List Year (2023-2024) ITEM NO : 7 35W-45W-65W- Led light Repair (Replacement of Driver /Mcpcb as Applicable & Two years warranty for work). ( SSR Item No : 20.17-536 ) (PMC Electrical ) Unique No (6659) Rate List Year (2023-2024) ITEM NO : 8 Supplying and erecting mains with WP 4 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. ( SSR Item No : 1.04-07 ) (PMC Electrical ) Unique No (3558) Rate List Year (2023-2024) ITEM NO : 9 Supply of cast iron Decorative pole RLP-100-50 90(Height 4950mm) 285Kg ( SSR Item No : 20.17-330 ) (PMC Electrical ) Unique No (6453) Rate List Year (2023-2024) ITEM NO : 10 ( SSR Item No : 3.03 ) (PMC NON-DSR ) Unique No (14062303) Rate List Year (2023-2024) ITEM NO : 11 Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-04 ) (PMC Electrical ) Unique No (3865) Rate List Year (2023-2024) ITEM NO : 12 Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2. SSR Item No : 2.04-06 ) (PMC Electrical ) Unique No (3867) Rate List Year (2023-2024) ITEM NO : 13 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB SSR Item No : 5.03-01 ) (PMC Electrical ) Unique No (4346) Rate List Year (2023-2024) ITEM NO : 14 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV SSR Item No : 1.03-14 ) (PMC Electrical ) Unique No (3549) Rate List Year (2023-2024) ITEM NO : 15 Supplying and laying (including excavation of suitable width depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. SSR Item No : 7.06-09 ) (PMC Electrical ) Unique No (6909) Rate List Year (2023-2024) ITEM NO : 16 Supplying, erecting & terminating armoured cable 4 core 6 sq. mm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL SSR Item No : 7.13 ) (PMC Electrical ) Unique No (4682) Rate List Year (2023-2024) ITEM NO : 17 Supply & installation of cast Alum.Decorative 30W LED Fitting Make-Dwarka Castings,Gopi Intricast,Pooja Industries SSR Item No : 1.02 ) (PMC NON-DSR ) Unique No (28081702) Rate List Year (2022-2023) ITEM NO : 18 Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-16 ) (PMC Electrical ) Unique No (3877) Rate List Year (2023-2024) ITEM NO : 19 Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. ( SSR Item No : 2.01-05 ) (PMC Electrical ) Unique No (3818) Rate List Year (2023-2024) ITEM NO : 20 Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22 / E-􀀀27 base ( SSR Item No : 2.08-13 ) (PWD-PUNE-ELECTRICAL ) Unique No (284761) Rate List Year (2022-2023) ITEM NO : 21 Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW ( SSR Item No : 1.03-02 ) (PMC Electrical ) Unique No (3537) Rate List Year (2023-2024) ITEM NO : 22 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW ( SSR Item No : 1.07-20 ) (PMC Electrical ) Unique No (3653) Rate List Year (2023-2024) ITEM NO : 23 Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW ( SSR Item No : 1.07-21 ) (PMC Electrical ) Unique No (3654) Rate List Year (2023-2024) ITEM NO : 24 Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. ( SSR Item No : 2.10-13 ) (PMC Electrical ) Unique No (3963) Rate List Year (2023-2024) ITEM NO : 25 Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( SSR Item No : 5.03-02 ) (PMC Electrical ) Unique No (4347) Rate List Year (2023-2024) ITEM NO : 26 Supplying, erecting & marking SPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( SSR Item No : 5.03-04 ) (PMC Electrical ) Unique No (4349) Rate List Year (2023-2024) ITEM NO : 27 Supplying, erecting & terminating armoured cable 4 core 10 sq. mm. complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( SSR Item No : 7.14 ) (PMC Electrical ) Unique No (4683) Rate List Year (2023-2024) ITEM NO : 28 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP ( SSR Item No : 9.01-04 ) (PMC Electrical ) Unique No (4907) Rate List Year (2023-2024) ITEM NO : 29 Supplying & erecting FRP box of size 300mm x 200mm x 125 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB ( SSR Item No : 7.08-10 ) (PMC Electrical ) Unique No (6940) Rate List Year (2023-2024) ITEM NO : 30 PRP shock proof junction box cover for octagonal pole with PMC embossed and two ribs of size 76mmx10mmx6mm for additional rigidity and stiffness. ( SSR Item No : 20.17-163 ) (PMC Electrical ) Unique No (6286) Rate List Year (2023-2024) ITEM NO : 31 Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. SSR Item No : 1.04-03 ) (PMC Electrical ) Unique No (3554) Rate List Year (2023-2024) ITEM NO : 32 Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. SSR Item No : 6.01.01 ) (PMC Electrical ) Unique No (4539) Rate List Year (2023-2024)
Contract Date: May 14, 2026 Contract Value : ₹ 10.80 Lakh
Local Bodies No of Bidders 3
Maharashtra View Result →
10.
Public Administrative Department #11095678 AOC
To Carry Out New Electrical Development Works In The Palm Garden.-ITEM NO : 1 GRP Pole 5 mtr Height conical shape made by Computer Numerical Controlled Filament Winding Machine using thermoset Resin (with Fire retardant and UV properties) having 62-65% glass content in one-piece, Top OD-99?1, Bottom OD-165+-1 , Avg. Pole thk: 8mm +-0.5mm. Specific Gravity (Ref Spec ASTM D 792): 1.5-1.8 gm/cm^3, Water absorption(Ref Spec ASTM D 570): <0.5%, Tensile Strength(Ref Spec ASTM D 4923): 250?50 MPa, Flextural Strength(Ref Spec ASTM D 790): 250?50 MPa, Deflection max 10% (Ref Spec ASTM D 4923) @50 kg load, Paint film thk 80-100 Micron. Two coats of UV PU Paint is must .colour as per Engineer in charge instructions.GRP Base Plate Round-325 mm Thk 16mm, PCD 250?1, Slot hole 4-18(mm)+-0.05(mm) and GRP cylindrical insert part 350 mm fitted with Pole by 8 Nos SS 304 Bolts at time of Filament winding process. Internal Junction Box (1 no. 1-1.5A SP MCB & 1 no 4 Way Connector fitted on Din rail) @ height 1000mm.Cover to be provided with Neoprene Rubber. Provision for overhead service cable - 15 mm Two round holes 180 Degree apart to be provided at 700 mm from top of pole. Rubber Grommet to be provided for both holes to avoid water ingress (if required) ( SSR Item No : 3.03 ) (PMC NON-DSR ) Unique No (03052302) Rate List Year (2023-2024) ITEM NO : 2 GRP Pole 6 mtr Height conical shape made by Computer Numerical Controlled Filament Winding Machine using thermoset Resin (with Fire retardant and UV properties) having 62-65% glass content in one-piece, Top OD-100?1, Bottom OD-180+-1 , Avg. Pole thk: 8mm +-0.5mm. Specific Gravity (Ref Spec ASTM D 792): 1.5-1.8 gm/cm^3, Water absorption(Ref Spec ASTM D 570): <0.5%, Tensile Strength(Ref Spec ASTM D 4923): 250?50 MPa, Flextural Strength(Ref Spec ASTM D 790): 250?50 MPa, Deflection max 10% (Ref Spec ASTM D 4923) @50 kg load, Paint film thk 80-100 Micron. Two coats of UV PU Paint is must .colour as per Engineer in charge instructions.GRP Base Plate Round-325+-1 mm Thk 16mm, PCD 250?1, Slot hole 4-18(mm)+-0.05(mm) and GRP cylindrical insert part 350 mm +-1 fitted with Pole by 8 Nos SS 304 Bolts at time of Filament winding process. Internal Junction Box (1 no. 1-1.5A SP MCB & 1 no 4 Way Connector fitted on Din rail) @ height 1000mm.Cover to be provided with Neoprene Rubber. Provision for overhead service cable - 15 mm Two round holes 180 Degree apart to be provided at 700 mm from top of pole. Rubber Grommet to be provided for both holes to avoid water ingress (if required) ( SSR Item No : 4.04 ) (PMC NON-DSR ) Unique No (03052303) Rate List Year (2023-2024) ITEM NO : 3 FRP Single arm 1/1.5 MtrBracket with SS Nut Bolts. (As per Attached Specifications) ( SSR Item No : 3 ) (PMC NON-DSR ) Unique No (06042304) Rate List Year (2023-2024) ITEM NO : 4 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). ( SSR Item No : 16.03-08 ) (PMC Electrical ) Unique No (5464) Rate List Year (2023-2024) ITEM NO : 5 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). ( SSR Item No : 16.03-09 ) (PMC Electrical ) Unique No (5465) Rate List Year (2023-2024) ITEM NO : 6 35W-45W-65W- Led light Repair (Replacement of Driver /Mcpcb as Applicable & Two years warranty for work). ( SSR Item No : 20.17-536 ) (PMC Electrical ) Unique No (6659) Rate List Year (2023-2024) ITEM NO : 7 Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary. SSR Item No : 2.08-14 ) (PMC Electrical ) Unique No (3937) Rate List Year (2023-2024) ITEM NO : 8 Supplying and erecting mains with WP 4 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. SSR Item No : 1.04-07 ) (PMC Electrical ) Unique No (3558) Rate List Year (2023-2024) ITEM NO : 9 Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF SSR Item No : 2.10-03 ) (PMC Electrical ) Unique No (3953) Rate List Year (2023-2024) ITEM NO : 10 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW SSR Item No : 1.07-20 ) (PMC Electrical ) Unique No (3653) Rate List Year (2023-2024)ITEM NO : 12 Supply of cast iron Decorative pole RLP-100-50 90(Height 4950mm) 285Kg ( SSR Item No : 20.17-330 ) (PMC Electrical ) Unique No (6453) Rate List Year (2023-2024) ITEM NO : 13 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( SSR Item No : 5.03-01 ) (PMC Electrical ) Unique No (4346) Rate List Year (2023-2024) ITEM NO : 14 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV ( SSR Item No : 1.03-14 ) (PMC Electrical ) Unique No (3549) Rate List Year (2023-2024) ITEM NO : 15 Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-06 ) (PMC Electrical ) Unique No (3867) Rate List Year (2023-2024) ITEM NO : 16 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. ( SSR Item No : 7.06-09 ) (PMC Electrical ) Unique No (6909) Rate List Year (2023-2024) ITEM NO : 17 Supplying, erecting & terminating armoured cable 4 core 6 sq. mm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( SSR Item No : 7.13 ) (PMC Electrical ) Unique No (4682) Rate List Year (2023-2024) ITEM NO : 18 Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-16 ) (PMC Electrical ) Unique No (3877) Rate List Year (2023-2024) Work ID : E9_2025_P37000_DEW Page 5 of 7 Budget Code: ITEM NO : 19 Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. SSR Item No : 2.01-05 ) (PMC Electrical ) Unique No (3818) Rate List Year (2023-2024) ITEM NO : 20 Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22 / E-􀀀27 base SSR Item No : 2.08-13 ) (PWD-PUNE-ELECTRICAL ) Unique No (284761) Rate List Year (2022-2023) ITEM NO : 21 Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW SSR Item No : 1.03-02 ) (PMC Electrical ) Unique No (3537) Rate List Year (2023-2024) ITEM NO : 22 Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW SSR Item No : 1.07-21 ) (PMC Electrical ) Unique No (3654) Rate List Year (2023-2024) ITEM NO : 23 Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. SSR Item No : 2.10-13 ) (PMC Electrical ) Unique No (3963) Rate List Year (2023-2024) ITEM NO : 24 Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB SSR Item No : 5.03-02 ) (PMC Electrical ) Unique No (4347) Rate List Year (2023-2024) ITEM NO : 25 Supplying, erecting & marking SPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( SSR Item No : 5.03-04 ) (PMC Electrical ) Unique No (4349) Rate List Year (2023-2024) ITEM NO : 26 Supplying and erecting PVC Surface modular double mounting plate 3 module complete duly erected. ( SSR Item No : 1.06-48 ) (PMC Electrical ) Unique No (3623) Rate List Year (2023-2024) ITEM NO : 27 Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. ( SSR Item No : 1.06-08 ) (PMC Electrical ) Unique No (3583) Rate List Year (2023-2024) ITEM NO : 28 Supplying, erecting & terminating armoured cable 4 core 10 sq. mm. complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( SSR Item No : 7.14 ) (PMC Electrical ) Unique No (4683) Rate List Year (2023-2024) ITEM NO : 29 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP ( SSR Item No : 9.01-04 ) (PMC Electrical ) Unique No (4907) Rate List Year (2023-2024) ITEM NO : 30 Supplying & erecting FRP box of size 300mm x 200mm x 125 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB SSR Item No : 7.08-10 ) (PMC Electrical ) Unique No (6940) Rate List Year (2023-2024) ITEM NO : 31 PRP shock proof junction box cover for octagonal pole with PMC embossed and two ribs of size 76mmx10mmx6mm for additional rigidity and stiffness. SSR Item No : 20.17-163 ) (PMC Electrical ) Unique No (6286) Rate List Year (2023-2024) ITEM NO : 32 Providing Fiber Reinforced Plastic Insulation for Streetlight Pole by applying 3mm thick FRP coat comprising of Primium quality resin,Plastic matt (450E),hardener, cobalt, color pigment complete with jell coat to give the profile resin-rich surface and enhance the appearance of the FRP coat.Before applying FRP coat insure that the surface should be moisture free and clean it by polish paper SSR Item No : 1 ) (PMC NON-DSR ) Unique No (21012501) Rate List Year (2024-2025) ITEM NO : 33 Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. SSR Item No : 1.04-03 ) (PMC Electrical ) Unique No (3554) Rate List Year (2023-2024) ITEM NO : 34 Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. SSR Item No : 6.01.01 ) (PMC Electrical ) Unique No (4539) Rate List Year (2023-2024)
Contract Date: May 14, 2026 Contract Value : ₹ 13.13 Lakh
Local Bodies No of Bidders 3
Maharashtra View Result →
11.
Public Administrative Department #11090976 AOC
Maintenance Of Water Supply Pipe Lines And Attending Leakages On Distribution Pipe Lines And Grp ( Raw & Clear Water ) Pumping Main In Nirmal Town Under Mgf / Pp / 15Thfc / Any Other Grants
Contract Date: Ref. Documents Contract Value : ₹ 21.37 Lakh
Local Bodies No of Bidders 1
Telangana View Result →
Rajasthan View Result →
13.
Tourism #11085444 Technical Bid
Tender For Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer. , Supplying And Filling Moorum In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry In Cement Mortar 1:3 (1Cement : 3 Coarse Sand) With Bricks Of Class Designation 75 Kg /Cm2. B. Upto Floor V Level. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: All Work Up To Plinth Level , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: In Retaining Walls , Return Walls(Any Thk) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Providing And Laying In Position Ready Mixed Concrete (Rmc) Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continious Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Suspended Floors, Roofs, Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates. Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only , Extra To Be Added For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De- Shuttering And De-Centering At All Levels, Over A Height Of 3.5M, For Every Additional Height Of 1M Or Part Thereof. (Plan Area To Be Measured) Suspended Floors, Roofs, Landings, Beams And Balconies (Plan Area To Be Measured) , Providing Tmt Steel Reinforcement Bars Of Sail, Tata, Vizag Made Only (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. Minimum Grade Of Steel - Fe 500 , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4B Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint.In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Colour Coated Galvulium Roofing Sheets Of 0.5Mm Thickness Including All The Accessories (Tata Make) But Excluding The Cost Of Purlins, Rafters, Trusses, Flashings Etc. Complete As Per The Directions Of The Engineer In Charge. , Providing & Fixing In Position Galvalume/Zincalume Flashings, Cappings, Ridges, Gutters Upto 600Mm/610Mm Girth And Min 3.00M In Length (Cold Rolled Steel 550 Mpa Yeild Stress Astm A 446 Grade E) With Hot-Dip Metallic Coating Of Aluminium-Zinc Alloy(Az 150 Galvalume) (150 Gms/Sqm Total Of Both Sides With Al-Zn Composition= 55% & 43.5% Resp. & 1.5% Si Conforming To Astm 792/ As 1397) 0.45 Mm Base Metal Thickness And 0.50Mm Total Coated Thickness, Factory Cut At All Heights For Roof, Side & Gable Cladding Complete In All Respects With Az 150 Gsm Smp Color Coated (20Mic Exterior Coat Of Silicon Modified Polyester Paint System Over 5 Mic Primer And 5 Mic Polyester Back Coat Over 5 Mic Primer) Incl. Fixing To Purlins With No 12X14X55Mm Mechanically Galvanised Hex Head Self Drilling Screws Of The Best Quality As Per As-3566 Class 3-4 Approved, Which Should Be Compatible To Be Used With Sheets. With Integral Washers And Epdm Seals Etc. Silicon Sealant Non-Hardening Neutral Cure Type Shall Be Applied At All End Laps, Complete As Directed. , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. Plain Grill , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc.With Hairline Finish, Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excludingfixingaccessoriessuchasnuts,Bolts, Fasteners Etc.). , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. Light Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Jet Black With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. ( Price Range 2000 To 2100 Rs Per Sq Mtr.) , Providing And Fixing Granite Stone Slabs (Mirror Polished) 18Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On Cement Paste And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. Jet Black , Providing And Laying Polished Granite Stone Flooring, Coping In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building, All Complete As Per The Architectural Drawings, With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade, Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. Polished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. ( Price Range 1550 To 1600 Rs Per Sq Mtr.) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm .80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Fixing 18Mm Thick Polished Black Granite Machine Cut For Kitchen Platforms, Counters, Window Sills, Door Frame, Urinal Partitions , Fascia And Similar Locations Of Required Size Of Approved Shade, Colour And Texture Laid Over 20Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing,Moulding And Polishing To Edge To Give High Gloss Finish, Etc. Complete At All Levels.( Price Range Rs.1500 To Rs.1700 Per. Sq.M ) , Providing 25Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. Size 60 Cm L X45 Cm H X 15 Cm T , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand). 20 Mm Thick. , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 (1 Cement: 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , 12 Mm Thick Cement Plaster 1:4 (1 Cement:4 Fine Sand) , 6Mm Thick Cement Plaster To Ceiling With 1:3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer , Extra For Plastering Done On Moldings, Cornices, Or Arch It Raves Including Neat Finish To Line And Level. In One Coat , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing & Fixing 19Mm Thk Plywood Work In Frames Of Doors Using 19Mm Marine Ply (Waterproof) With All Hardware,And Other Frames And Fixed In Position With 50 Mm Fastners Etc. Complete As Specified As Shown In The Drawings. , Providing And Fixing First Class Indian Teak Wood Moulded Beading To Door And Window Frames With Iron Screws , Plugs And Priming Coat On Unexposed Surfaces Etc. 50X12Mm Size. , Providing And Fixing Block Board Flush Door Shutters 35Mm Thick ( 1St Class Teak Ply On Both Faces), Laminated On Both Sides With 1Mm Thick Laminate Of Approved Brand And Colour Including Cost Of Adhesive, Nails, Screws During Fixing Etc. Complete. , Providing & Fixing Bright Finished Stainless Steel Mortise Latch & Lock With 60 Mm Cylinder And A Pair Of Levers, Handles With Necessary Screws Etc.Complete , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete. 300X 16 X 5 Mm , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete Size 125 X 70 X 4.0Mm , Provided And Fixing 150 Mm Chromium Plated Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutters Thickness Complete. , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete. 200 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading, Transportation, Unloading, Levelling Etc At The Risk And Cost Of Agency / Contractor Including Selection Of Site For Disposal With All Lifts And Leads Etc. All Complete. , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And Fixing Of Aluminium Window With 3 Tracks And 2 Shutters Sliding Window With Tobular Frame Ployster Powder If Thicness 75-80 Microns With Approved Standard Accessaries Such As Ball Beaing Rollers, Concealed Lock, 6Mm Thick Plain Clear Glass With Epdm Beading Etc. , Drilling 150 Mm Deep Hole In R C C And Grouting The Rebar With Lockfix Etc Complete. 10 Mm Dia , Drilling 150 Mm Deep Hole In R C C And Grouting The Rebar With Lockfix Etc Complete.12 Mm Dia , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design , Dismantling Steelwork In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates Bolts, Nuts, Cutting Dismembering And Staking Within 50 Mts. Lead Extra For Dismantling Trusses, Rafters, Purlins Etc. Of Steel Work, For Every Additional Span Of One Meter Or Part Thereof Beyond 10 Mts. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Doors, Windows And Clearestory Windows (Steel Or Wood) Shutters Including Chowkhats Architrave Holdfast Etc. Complete And Staking Within 50 Mt. Lead. Of Area 3 Sq.M. And Below , Dismantling Wood Work Of Area Below 40 Sq.Cm. Wrought Framed And Fixed In Frames, Other Frames And Trusses Including Stacking Of Material Within 50 Mts. Lead , Dismantling G.I. Sheets Roofing Including Ridges, Hips Valleys And Gutters Etc. And Stacking The Material Within 50 Meters Lead. , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Main Entrance Gate In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Mahadev Big Mural In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Nandi In Frp As Per Tender Drawing , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Laying 300X350X160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 75 Mm Gap Between Two Stone For Grassing.Gaps To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.(Price Including Stone,Gardening Soil,Fertilizers And Grass Etc Complete) , Supplying And Stacking Of Good Earth ( Garden Soil) At Site Including Royalty And Carriage Upto 1 Km. (Earth Measured In Stacks Will Be Reduced By 20% For Payment). , Spreading Of Sludge, Dung Manure Or/And Good Earth (Garden Soil) In Required Thickness (Cost Of Sludge, Dung Manure Or/And Good Earth To Be Paid Separately). , Supply At Site Of Work/Store Deoiled Neem Cake Duly Packed In Used Gunny Bags As Per Mort & H Specification 308.2 , Supplying Of Sludge Duly Stacked At Site/Store As Per Mort & H Specification 308.2 , Filling Mixture Of Earth & Sludge Or Manure In The Desired Proportion In Trenches Flooding With Water And Leveling (Cost Of Supplying Earth And Sludge Or Manure And Mixing Excluded). , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Rubra , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Saraca Ashoka , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neem , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Nyctanthes , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Peltophorum Pterocarpum , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Bauhinia Purpurea , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Filliciam Decipiens , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cordia Dichotoma , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cassia Fistula , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Millingtonia Hortensis , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Jacaranda Mimosifolia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neolamarckia Cadamba , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Thevetia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Michelia Champaca , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Alba , Supplying & Planting Shrubs, Creepers, Ground Covers, As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. , Providing And Fixing White Vitreous China Type Water Closet Squatting Pan (European Type W.C. Pan) With Dual Flushing (Citren Nelson/ Similar)With Stop Cock Wall Flanges Flush Pipe Or Elbow And Vacuum Breaker Coupling Etc. Including Cutting Making Good The Walls And Floors Where Required. (Excluding Handicap Toilets) , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430 X 260 X 350 Mm And 340 X 430 X 265 Mm Sizes Respectively With Pvc Automatic Flushing Cistern With Fittings, R.S. Or C.I. Brackets, Standard Size Galvanized Steel Flush Pipe And Spreaders With Brass Unions & G.I. Clamps Complete, Including Painting Of Cistern And Fittings, Cutting And Making Good The Walls And Floors Where Required. (A)One Urinal Basin With 5 Liters P .V .C. Automatic Flushing Cistern. , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Including Cutting And Making Good The Walls Where Required. Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws. Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Wall Mixer With 3 In 1 System With 115Mm Long Bend Pipe For Connection To Over Head Shower Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing C.P. Brass Towel Rail Complete With C.P. Brass Brackets Fixed To Wooden Cleats With C. P. Brass Screws. 750X20 , Providing & Fixing Soap Dish Chromium Plated With Brackets Fixed To Wooden Cleats With Cp Brass Screw , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed .110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed. 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating.110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door :110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door :110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75Mm , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door 110Mm , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door . 75Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Providing And Fixing R.P.V.C. Vent Cowl: 75Mm , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Cm2 In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10Cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar. , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:.B) 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. 32Mm Outer Dia. , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : (Toilet Internal Ball Valve, 15Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : (Toilet Internal Ball Valve, 40 Mm Nominal Bore . , Providing And Fixing Non-Return Valve Of Approved Quality :40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality .25 Mm Nominal Bore , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 25 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 32 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 40 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 50 Mm , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701;1996. 1000 Lit. Capacity , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Of Concealed Type Step Light With 6W Led Lamp Die-Cast Aluminium Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs. At L70B50, Including Driver By Making Necessary Arrangement/Recess In Wall To Make It Flush With Surface ,Ip Rating : Ip 67 ,Ik10 Rated , Connecting Wire, Including Gear Box And Junction Box For Cable Connection Complete And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Wall Mounted Street Light Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6M. In Length Complete. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Thd0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70B50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10Cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-15 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -6 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And 3 Phase Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (B) 10 To 40 A , Supply, Installation, Testing And Commissioning Of 3 Kva 1 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (C) 6 Way (8+18), Double Door, Horizontal Type Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. (E) Tpn, Cat A , Supplying And Fixing Following Rating Four Pole (Triple Pole And Neutral) 415 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm(Ground To Db) , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (C) 6 Module (200Mm X 75 Mm) Cat A , Supplying & Erecting Of Led 9 To 10W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying And Erecting Outdoor Square / Circular Max. 20 W Pendent Light With Having Pressure Die-Cast Aluminium Housing, Polystyrene Diffuser Having System Lumens Output Of Min. 2000 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Max. Ripple Of 5%, Thd10%, P.F. 0.95, Operating Range Of 120-270V, Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70B50 Including Driver, Having Mounting Arrangement With Board For Surface Type Or Suspended Accessories Complete. , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supply And Erecting Fan Hook Box ( 100 Mm Diameter Or Equivalent Square Size, 75Mm Deep) Fabricated Out Of 16 Swg Sheet Steel With 10 M Round Bar Hook Bounded To Reinforced Cement Concrete Steel Upto 50 Mm Length Protruding On Each Side Of The Box, Including Painting With 2 Coats Of Red Oxide, Complete As Required. , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Gi Pipe Medium Class 25 Mm (Civil Gsr 1034 (F)(Iii))
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Goa View Result →
Telangana View Result →
15.
Public Administrative Department #11005058 AOC
Maintenance Of Water Supply Pipe Lines And Attending Leakages On Distribution Pipe Lines And Grp(Raw &Amp; Clear Water) Pumping Main In Nirmal Town Under Municipal General Funds 2021-22
Contract Date: Ref. Documents Contract Value : ₹ 22.22 Lakh
Local Bodies No of Bidders 1
Telangana View Result →
16.
Public Administrative Department #10997339 AOC
Procurementr Of Sluice Valve Ac, Grp, Pipe For Maintenance Of Water Supply In The Town Under Mgf In Mancherial
Contract Date: Ref. Documents Contract Value : ₹ 6.89 Lakh
Local Bodies No of Bidders 1
Telangana View Result →
17.
Defence #10911556 AOC
Bids Are Invited For Plb Pipe , 96 F Optical Fibre Cable , Dwc Pipes , Rcc Chambers , Rcc Route Joint Indicators , Plb Push Fit Couplers , Ujc 96F , Ftb 96F , Fdms Sd Type , Pig Tails- Sc Pigtail , Patch Chords 20 Mts Sc To Sc Pig Tail , Insulation Tapes , 20 Mm Hose Pipe , Cable Ties Tapes Misc , Causion Tape , Trenching Cost Based On The Soil , Pipe Laying Charge , Cement Concrete , Cable Pulling Blowing , Dwc Laying Charges , Labour Charges For Testing And Splicing , Distribution Of Stores To Routes , Loading And Unloading Charges , Unforeseen , Coral Make Iris Ivdx Cloud Server , Coral Make 192 Port Media Gateway , Ip Phone Model No Grp 2604 , D Link 10 100 1000 Giga Switch 24 Port Network , D-Link Cat 6 Ethernet Lan Cable , D- Link Single Plate Io Modules , D-Link 3 Mtrs Length Patch Cards , 6-F Ofc Sm Armored Cable Finolex Make , D-Link 4 U Rack With Accessories , Cost Of 40 Mm Plb Duct For Fibre Laying , Lc-Lc Fibre Patch Cards 3 Mtrs Length , D-Link 12 U Rack With Accessories , Digging Of The Cable Trenchaning , Ofc Cable Laying Charges By Using Plb Duct , Ethernet Lan Cable Laying Charges , 100 Pair Fiber Junction Boxes With Ge Krone Modules , 500- Pair Junction Box With Ge Krone Modules , Jumper Cable 500 Mtrs Each Coil , Beetel M500 Cli With Speaker Analog Telephone , Server And Gateway Installation Total Quantity : 12367
Contract Date: Ref. Documents Contract Value : ₹ 46.99 Lakh
Government Departments No of Bidders 12
Andhra Pradesh View Result →
18.
Power #10866563 AOC
Bids Are Invited For Overhauling Of Spares Of Bhel Make Turbine And Generator Mse Hose 2St20b5 B5 1500 6794 , Equal Tee Couplg 30 30 30 , Reduction Cuplg Kor30 16S , Straight Coupling 25 25 , Reduction Cuplg Kor30 25S , Tube Od 30 X 4 Sa213tp316ti , Ss Tube 25X3 1000Mm , Pipe Clamp M8x34 6817 Nb 25 , Straight Coupling 30 30 , Tube Od 16 X 2 Sa213tp316ti , Iso.Ball Valve Dn13pn500 , Stud Coupling 30Mm M42x2 , Stud Couplg 16Mm M22x1.5 , Equal Tee Couplg 16 16 16 , Equal Tee Couplg 20 20 20 , Reducer Coupling 16 12 , Stem A 6.3 Sqcm 6017 Bpe 1 Bpe 2 Valve Type E45s Ref 6110 Equp. Name Hp Bypass , Valve Seat Ay 6017 , Grap.Pac.Rin D85xd60x12.5 For Bp 1 Bp 2 Type Ars 140A Ref 6527 Equp. Name Hp Bypass , S W Gasket Od183xid162xt4.5 , Gasket Sw Grp Od149xid124.5X4.5T For Bp 1 Bp 2 Type Ars 140A Ref 6527 Equp. Name Hp Bypass , Gasket Sw Grp Od313xid293x4.5T For Bp 1 Bp 2 Type Ars 140A Ref 6527 Equp. Name Hp Bypass , Grap.Pack.Ring D38xd22x8 , Gra. Pack. Ring D112xd88x12 Bpe 1 Bpe 2 Valve Type E45s Ref 6110 Equp. Name Hp Bypass , Guide Ring D76xd70x12.8 , Piston Sealing D250xd225x31.5 For Actuator Asm 250 10 Sk 240 Ref 6724 Equp. Name Hp Bypass , Piston Rod Sealing D85xd70x22.5 For Actuator Asm 250 10 Sk 240 Ref 6724 Equp. Name Hp Bypass , O Ring D75.79X3.53 6804 For Actuator Asm 250 10 Sk 240 Ref 6724 , O Ring D91.67X3.53 6703 For Actuator Asm 250 10 Sk 240 Ref 6724 Equp. Name Hp Bypass , Guide Ring 34X30x9.6 , Piston Rod Sealing 43X30x20 , Piston Sealing For Asm100 10 , O Ring D94.84X3.53 6731 For Actuator Asm 100 10 Sk 200 Ref 6733 Equp. Name Hp Bypass , O Ring D47.22X3.53 6733 , Scrapper Ring Asm100 10 , 1 117Scrapper Ring 70 X83x10.8 For Actuator Asm 250 10 Variance No. 0 , Automatic Gasket Set 1170 Ass Drg Desc Hp Control Valve Servomotor Assly Drg No. 01140241000 Part No. 104 Variance No. 0 , Sealing Ring Ass Drg Desc Casing For Hpcv Servomotor Assly Drg No. 01140205800 Part No. 35 Variance No. 0 , Sealing Ring Ass Drg Desc Casing For Hpcv Servomotor Assly Drg No. 011
Contract Date: Ref. Documents Contract Value : ₹ 2.82 Crore
Boards / Undertakings / PSU No of Bidders 1
Jharkhand View Result →
19.
Housing Urban and Rular Development #10789818 Price Bid
Maintenance Of Gangajal ( Connection Work Of Grp Pipe Line At Sector-115 And 137 ) Noida=> Open Tender
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Uttar Pradesh View Result →
20.
New and Renewable Energy #10769825 Price Bid
Annual Rate Contract For Spares For Sandvik Make U/G Equipment , Annual Rate Contract For Spares For Sandvik Make U/G Equipment, Make Sandvik , Spool Part No.- 40365 , Accumulator Bottom Part No.- 100511 , Cylinder Part No.- 150152 , Seal Carrier Part No.- 150165 , Cover Part No.- 150322 , Pressure Control Valve Part No.- 150352 , Accumulator E64 Part No.- 300791 , Check Valve Housing Part No.- 300800 , Hose Assembly Part No.- 15228008 , Clamp, Hose Part No.- 28067890 , Clamp, Hose Part No.- 28067910 , Clamp, Hose Part No.- 36073270 , Washer Part No.- 42118130 , Hexagon Socket Head Screw Part No.- 44580140 , Hexagon Socket Set Screw Part No.- 44859320 , Screw Part No.- 55003400 , Adapter Assembly Part No.- 55005676 , Screw Part No.- 55025463 , Washer, Spring Part No.- 55035148 , Indicator, Service Part No.- 55055782 , Screen For Oil Return Part No.- 55071759 , Suction Box Part No.- 55092697 , O-Ring Part No.- 55155074 , Hose Part No.- 55155201 , Screw Part No.- 55155437 , Gasketet Part No.- 55181317 , Adapter, Elbow Part No.- 55214080 , Screw Part No.- 55214107 , Adapter, Hydraulic Part No.- 80033099 , Plug Part No.- 80468339 , Hexagon Head Screw Part No.- 80880229 , Disk Spring Part No.- 80880639 , Pressure Reducing Valve Part No.- 81079109 , Adapter, Hydraulic Part No.- 81318449 , Gasket Part No.- 81517459 , Washer, Lock, Double Part No.- 85128189 , Washer, Lock, Double Part No.- 85128209 , Pulley, V Belt Part No.- 85443119 , Elbow Part No.- 85883989 , Hydr.Hose Assembly Part No.- 86536849 , O-Ring Part No.- 87180799 , Supporting Bushing Part No.- 89556479 , Screw, Hexagon Head, Full Thread Part No.- Af00100133 , Screw, Hexagon Head, Full Thread Part No.- Af00100328 , Screw, Hexagon Head, Full Thread Part No.- Af00100736 , Screw, Hexagon Head, Full Thread Part No.- Af00101125 , Screw, Hexagon Head, Partial Part No.- Af00101225 , Screw, Set, Socket, Hexagon, Cup Pilot Part No.- Af01000129 , Nut, Hexagon Part No.- Af01400007 , Nut, Hexagon, Prevailing Torque Part No.- Af01900004 , Washer, Plain, Normal Part No.- Af02300005 , Washer, Lock, Pair Part No.- Af03000030 , Washer, Lock, Pair Part No.- Af03000034 , Screw Part No.- Bg00213771 , Fitting Elbow Part No.- Bg00245614 , Fitting Part No.- Bg00245615 , Blow Down Valve Part No.- Bg00271527 , Electric Motor, Three Phase Part No.- Bg00322892 , Pulley Part No.- Bg00323162 , Bushing Part No.- Bg00323166 , Oil Filling Pluh Part No.- Bg00323817 , O-Ring For Oil Separator Part No.- Bg00323827 , Fitting With Screen For Oil Return Part No.- Bg00323829 , Wing Nut Part No.- Bg00323875 , O-Ring Part No.- Bg00323876 , Discharge Valve Net Part No.- Bg00323883 , Seal, O-Ring Part No.- Bg00323889 , Ring, Retaining Part No.- Bg00323894 , Nut, Cap Part No.- Bg00485062 , Seal Kit Part No.- Bg00565968 , Flange Part No.- Bg00614522 , Pocket, Sensor Part No.- Bg00614737 , Filter Unit / Oil Filter Assembly Part No.- Bg00614787 , Housing Part No.- Bg00615518 , Cover, Front Part No.- Bg00615523 , Fitting Part No.- Bg00615527 , Plug Part No.- Bg00615530 , Screw Part No.- Bg00615890 , Hose Part No.- Bg00627493 , Support Part No.- Bg00632464 , Piston Part No.- Bg00787332 , Bearing Part No.- Bg00787343 , Bearing Part No.- Bg00787673 , Gearbox Part No.- Bg00788224 , Housing, Flushing Head Part No.- Bg00790831 , Bushing, Bearing Part No.- Bg00791171 , Bearing Assembly Part No.- Bg00800728 , Bushing, Bearing Part No.- Bg00800730 , Flushing Head Kit Part No.- Bg00800865 , Seal Kit Complete Kit For Flushing Device Assembly Part No.- Bg00800869 , Housing, Seal Part No.- Bg00821314 , Distributor Part No.- Bg00859794 , Cover, Rear Part No.- Bg00859982 , Cylinder, Pilot Part No.- Bg00862174 , Fan Part No.- Bg00880156 , Housing Part No.- Bg00882003 , Plate Part No.- Bg00882013 , Plate, Cover Part No.- Bg00882091 , Compressor Assembly Part No.- Bg00882793 , Air End Part No.- Bg00882931 , Seal, Rod Part No.- Bg00917477 , Shaft, Rotating Part No.- Bg00917593 , Seal, Rod Part No.- Bg00917680 , Flushing Device Assembly Part No.- Bg00920535 , Bearing Assembly Part No.- Bg00923959 , Seal Kit Complete Seal Kit For Rdx5 Part No.- Bg00928285 , Screw, Retainer Part No.- Bg00928425 , Tool, Kit / Rdx5 Part No.- Bg00967179 , Bearing Assembly Part No.- Bg01127113 , Blow Down Valve Part No.- Bg01129175 , Valve, Control Part No.- Bg01129207 , Endurance Kitpart No.- Bg01129537 , Percussion Kit Part No.- Bg01130426 , Rotation Kit Part No.- Bg01130465 , Body Kit Part No.- Bg01130550 , Bolt Kit Part No.- Bg01130566 , Seal Kit Part No.- Bg01194761 , Plate, Side Part No.- Bg01290737 , Bushing, Plain Shaft B Part No.- 3630 , Lock Nut Part No.- 90507 , Lock Nut Part No.- 90519 , Buffer Part No.- 300767 , Sleeve Part No.- 689390 , Damper Part No.- 714630 , Pin Part No.- 767720 , Connector Part No.- 822730 , Flange Part No.- 824820 , Flange Part No.- 824830 , Flange Part No.- 2697490 , Lever Part No.- 2795370 , Pipe Weldt Part No.- 2972590 , Protection Sleeve Part No.- 3340308 , Screw Part No.- 3378238 , Plug Part No.- 3381178 , Belt Gear Part No.- 3383758 , Inlet Valve Part No.- 3388708 , Seal Kit Part No.- 3389010 , Seal Kit Part No.- 3389270 , Spring Part No.- 3397308 , Elbow Fitting Part No.- 3480868 , Oil Separator Part No.- 3582228 , Seal Part No.- 3598208 , Valve Part No.- 3603078 , Compressor Unit Part No.- 3965238 , Diaphragm. Part No.- 4114808 , Rubber Part No.- 4131278 , Reducer Part No.- 4144358 , Spring Part No.- 4144488 , Alternatorpart No.- 4521029 , Seal Kit Part No.- 4602009 , Check Valve Part No.- 4602010 , Inner Spring Part No.- 4694076 , Receptacle & Wire Assembly Part No.- 4694317 , Dust Cover Part No.- 4694322 , Clutch Drum Assy Part No.- 4695708 , Clutch Drum Assy Part No.- 4695716 , Gear Part No.- 4696240 , Piston Part No.- 4696260 , Lock Up & Modulator Valve Assembly Part No.- 4696526 , Sensor Part No.- 4696702 , Clutch Support&Plug Assembly Part No.- 4696853 , Mounting Screw Part No.- 4697223 , Bearing Single Row Radial Ball 72M Part No.- 4697637 , Spool Stop Spring Part No.- 4698595 , Cover Part No.- 4699250 , Baffle, Oil Part No.- 4699257 , Stator Support & Sleeve Assy Part No.- 4699262 , Bearing, Radial Ball Part No.- 4699265 , Support Part No.- 4699405 , Oring Part No.- 4699635 , Pump Drive Bushing Part No.- 4699818 , Hub, Turbine & Lock-Up Part No.- 4699873 , End Plug, Housing Part No.- 4700384 , Valve Part No.- 4700404 , Gasket Part No.- 4700461 , Sleeve, Tube Part No.- 4700532 , Bearing, Radial/Single Row Part No.- 4700569 , Cylindrical Roller Bearing S/Row Part No.- 4700584 , Shaft, Turbine Part No.- 4700609 , Shaft, Output Part No.- 4700617 , Spring Part No.- 4700720 , Inner Hub O-Ring Part No.- 4700734 , Element, Fuel Prefilter (Felt) Part No.- 4701242 , Element, Fuel Filter Part No.- 4701246 , Preheat Indicator Part No.- 4701392 , Seal Part No.- 4701419 , Pump Part No.- 4702908 , Screw Plug Part No.- 4732019 , Sealing Ring Part No.- 4732020 , O-Ring Part No.- 4732032 , Sealing Ring Part No.- 4732039 , Bleeding Socket Part No.- 4732040 , Bleeder Valve Part No.- 4732042 , Compression Spring Part No.- 4732043 , Compression Spring Part No.- 4732044 , Warning Label Was Dupl 69039050 Part No.- 4732047 , Pin Part No.- 4732048 , Screw Plug Part No.- 4732058 , Sealing Ring Part No.- 4732059 , Thrust Washer Part No.- 4732062 , Thrust Washer Part No.- 4732070 , Needle Bearing Part No.- 4732071 , Locking Pin Part No.- 4732073 , O-Ring Part No.- 4732078 , Screw Plug Part No.- 4732100 , Sealing Ring Part No.- 4732101 , Adjusting Nut Part No.- 4732112 , Rubber Cover Part No.- 4768968 , Valve, Magnetic Part No.- 4791340 , Plug Part No.- 4828688 , Seal Kit Part No.- 4900150 , Orbitrol-Control Part No.- 4900182 , Cap Part No.- 4910091 , Oil Filler Cap Part No.- 4910092 , Drain Cock Part No.- 4910150 , Anti-Slip Tape, Roll Part No.- 4910301 , Eye Piece Part No.- 4940268 , Ring Part No.- 4940418 , Valve Seat Part No.- 4973428 , Pin Part No.- 4973558 , Cover Part No.- 5410678 , Clamp Part No.- 6429006 , Clamp Part No.- 6429015 , Clamp Part No.- 6429016 , Clamp Part No.- 6429017 , Clamp Part No.- 6429114 , Clamp Part No.- 6429117 , Clamp Part No.- 6429204 , Fastener Part No.- 6429205 , Pipe Mounting Part No.- 6429424 , Slot Screw 4Mm X 10Mm Zp Part No.- 6538855 , Washer, Plain Part No.- 6581405 , Washer, Plain Part No.- 6581412 , Spring Washer Part No.- 6582409 , Lock Plate Part No.- 6587417 , Washer, Special Part No.- 6589470 , Circlip 125 X 4 10.9 Part No.- 6590385 , Led, Yellow Part No.- 8000051 , Led, Green Part No.- 8000062 , Bridge Part No.- 8000911 , Contact Part No.- 8001181 , Coolant Level Sensor Part No.- 8002325 , Fuse Part No.- 8003192 , Fuse Part No.- 8003196 , Fuse Part No.- 8003197 , Relay55005191 Part No.- 8003325 , Inductive Detector 74203901 Part No.- 8501352 , Cap Part No.- 8537018 , End Cover Part No.- 8539988 , Seal Housing Part No.- 8540368 , Support Plate Part No.- 8540778 , Damping Adapter Part No.- 8543268 , Spring Part No.- 8543678 , Nozzle Part No.- 8559098 , Main Switch Part No.- 8900212 , Back Rest Part No.- 8900674 , Seat Foam Part No.- 8900676 , Handle/Cover Kit Part No.- 8900679 , Height Adj. Spring Kit Part No.- 8900680 , Dampner Kit Part No.- 8900682 , Stopper Kit Part No.- 8900683 , Weight Adjustment Part No.- 8900684 , Bearing Kit Part No.- 8900685 , Bellows Kit Part No.- 8900686 , Slide Rail Kit Part No.- 8900687 , Safety Belt Part No.- 8900715 , Gauge Part No.- 9030038 , Puller Part No.- 9034501 , Spindle Part No.- 9038958 , Distributor Part No.- 9044948 , Gauge Part No.- 9084548 , Diaphragm Part No.- 9260298 , Torque Wrench Set Part No.- 9333378 , Seal Part No.- 9373230 , Stand Part No.- 9517098 , Body Part No.- 9550318 , Stand Part No.- 9687658 , Connection Cable 16P Part No.- 10109952 , Pushbutton Box Assypart No.- 10446962 , Terminal Box Part No.- 10614851 , Junction Box Assembly Part No.- 10615041 , Sleeve Part No.- 13446128 , Support Part No.- 13482506 , Seal Part No.- 15000878 , Chuck Part No.- 15021428 , Sleeve Part No.- 15021838 , Plug Part No.- 15022158 , Sleeve Part No.- 15022978 , Bearing Housingpart No.- 15025908 , Bushing Part No.- 15027638 , Tool Part No.- 15028808 , Tool Part No.- 15029098 , Tool Part No.- 15029118 , Housing Assy Part No.- 15034918 , Sleeve Part No.- 15039708 , Sleeve Part No.- 15039838 , Sleeve Part No.- 15052008 , Seal Rubber Part No.- 15053968 , Punch Part No.- 15054568 , Thrust Part No.- 15054698 , Punch Part No.- 15055168 , Hard Metal Pin Part No.- 15056178 , Seal Plate Part No.- 15057208 , Punch Part No.- 15067808 , Punch Part No.- 15067928 , Punch Part No.- 15068098 , Ring Part No.- 15068658 , Gage Part No.- 15074648 , Sleeve Part No.- 15074808 , Slide Washer Part No.- 15079718 , Thrust Button Part No.- 15080078 , Gasket Part No.- 15080918 , Plate Part No.- 15154858 , Coupling Part No.- 15175668 , Sleeve Part No.- 15177968 , Shaft Part No.- 15178158 , Shank Bushing Part No.- 15178308 , Tool Part No.- 15180648 , Gasket Part No.- 15181808 , Gasket Part No.- 15181938 , Handle Part No.- 15186608 , Tool Part No.- 15186728 , Gasket Part No.- 15191708 , Gear Housing Assy Part No.- 15193988 , Seal Part No.- 15198648 , Shaft Part No.- 15202408 , Tool Part No.- 15209878 , Seal Housing Part No.- 15210128 , Sleeve Part No.- 15216908 , Cover Part No.- 15217068 , Flushing Device Assembly Part No.- 15217901 , Punch Part No.- 15224888 , Punch Part No.- 15224908 , Socket Part No.- 15226238 , Rotation Bushing Part No.- 15233108 , Diaphragm Part No.- 15235798 , Shaft Assy Part No.- 15246038 , Seal Housing Part No.- 15247208 , Opener Part No.- 15250138 , Cap Nut Part No.- 15252568 , Plate Part No.- 15253858 , Gasket Plate Part No.- 15253988 , Distributor Part No.- 15257638 , Cap Nut (Replaces 15179608) Part No.- 15263888 , Tie Rod Part No.- 15263908 , Bushing Part No.- 15269708 , Bushing Part No.- 15271108 , Front Bushing Part No.- 15271508 , Studpart No.- 15271638 , Chuck Part No.- 15272368 , Bearing Bushing Part No.- 15274408 , Front Cover Part No.- 15274538 , Shank Bushing Part No.- 15274798 , Gasket Part No.- 15274818 , Front Cylinder Part No.- 15366818 , Piston Part No.- 15366948 , Rear Cylinder Part No.- 15367138 , Distributor Part No.- 15367828 , Accumalator Assy (Uncharged) Lp Part No.- 15374678 , Accumulator Assy Uncharged Part No.- 15374708 , Cover Part No.- 15387218 , Filling Device Part No.- 15393618 , Low Press.Accumalator Part No.- 15404698 , Gear Wheel Part No.- 15419408 , Rotation Shaft Part No.- 15421748 , Spacer Assy Part No.- 15422198 , Body Part No.- 15476448 , Piston Part No.- 15500408 , Piston Part No.- 15502428 , Piston Part No.- 15504448 , Piston Part No.- 15516928 , Piston Part No.- 15532668 , Guide Band Part No.- 15532798 , Pin Part No.- 15545618 , Mounting Plate Part No.- 15699858 , Spacer Part No.- 15775908 , Orifice Piece Part No.- 15973618 , Spring Part No.- 16088638 , Cover Part No.- 16239508 , Cover Part No.- 16241708 , Piston Part No.- 16346508 , Shaft Part No.- 16396418 , Cover Part No.- 16608268 , Water Valve Part No.- 16818742 , Air Flushing Valve Part No.- 16818871 , Water Separator Part No.- 16943942 , Shaft Part No.- 20611688 , Warning Tipping Hazard Part No.- 20728968 , Warning Part No.- 20736978 , Plate Part No.- 20756808 , Orifice Adapter Part No.- 20781688 , Filling Pump Assy Part No.- 20784451 , Shim 8Mm Part No.- 20801958 , Limit Bushing Part No.- 20803437 , Shim 1 Mm Part No.- 20803568 , Flushing Valve Assy Part No.- 20824404 , Roller Part No.- 20829448 , Roller Part No.- 20829578 , Plate Part No.- 20830928 , Plate Part No.- 20831098 , Gasket Part No.- 20834148 , Dipstick Part No.- 20835288 , Stop Part No.- 20835308 , Plate Part No.- 20842978 , Lever Assambly Part No.- 20843858 , Mounting Plate Part No.- 20892628 , Lockscrew Part No.- 20902718 , Gauge Part No.- 23510368 , Pr Guage Set Part No.- 23512408 , Branch-T Part No.- 23542808 , Gauge Part No.- 23544538 , Gauge Part No.- 23544668 , Tool Part No.- 23924928 , Bushing Part No.- 26251208 , Jaw Part No.- 26393788 , Mounting Piece Part No.- 26417688 , Cylinder Assy Part No.- 26452778 , Cover Part No.- 26452808 , Jaw Part No.- 26452928 , Cover Part No.- 26482888 , Fill Cap Part No.- 26504898 , Pin Set Part No.- 26511761 , Cover Part No.- 26512518 , Valve Assy Part No.- 26522678 , Cover Plate Part No.- 26527188 , Pin Assy Part No.- 26562682 , Shaft Part No.- 26563308 , Botton Plate Part No.- 26563568 , Cover Part No.- 26567198 , Piston Part No.- 26598208 , Gasket Part No.- 28335660 , Collector Part No.- 28901298 , Distributor Part No.- 29901198 , Rear Bushing Part No.- 29901218 , High Pressure Accumulator Part No.- 29902358 , O-Ring Part No.- 30063710 , Piston Part No.- 30296908 , Hl510s-38 Omsu80 Part No.- 30385022 , Gasket Part No.- 30809658 , Orifice Socket Part No.- 30895408 , Orifice Sleeve Part No.- 30897558 , Bracket For Wheel Part No.- 32041708 , Mud Pipe Part No.- 32065408 , Cable Guide Part No.- 32093348 , Cylinder Part No.- 32121348 , Cover Part No.- 32121478 , Cable Guide Part No.- 32149788 , Top Piece Part No.- 32155088 , Inclination Gauge Part No.- 32156111 , Piston Rod Part No.- 32163248 , Support Part No.- 32173148 , Tf Feed512 Part No.- 32202158 , Cover Plate Part No.- 32219688 , Cover Part No.- 32219708 , Cover Part No.- 32265558 , Cylinder Tube Part No.- 32318558 , Piston Rod Part No.- 32318708 , Cylinder Tube Part No.- 32318838 , Cylinder Tube Part No.- 32319028 , Cylinder Tube Part No.- 32319308 , Piston Rod 50 Part No.- 32319438 , Piston Rod Part No.- 32319568 , Cylinder Tube Part No.- 32319698 , Cylinder Tube Part No.- 32319718 , Shaft Part No.- 32336908 , Idler Wheel Part No.- 32340568 , Hydr. Cylinder Part No.- 32357011 , Rear Frame Part No.- 32511638 , Valve Block Part No.- 32549978 , Control Bloc Part No.- 32552528 , Boom Control Valve (+Pito) Part No.- 32577658 , Oiler Kvl10-1 Part No.- 32654301 , Control Block Part No.- 32884148 , Control Bloc Part No.- 32885718 , Hydr.Cylinder Part No.- 32890398 , Hydr.Cylinder Part No.- 32890418 , Hydr.Cylinder Part No.- 32890547 , Hydr.Cylinder Part No.- 32890548 , Hydr.Cylinder Part No.- 32890678 , Hydr.Cylinder Part No.- 32890708 , Cylinder Part No.- 32890828 , Bushing Part No.- 33009948 , Band Part No.- 33012758 , Bracket Part No.- 33134178 , Bracket Part No.- 33143508 , Frame Part No.- 33143628 , Bushing Part No.- 33181618 , Plug Part No.- 33186408 , Guide Piece Part No.- 33191233 , Wear Bushing Part No.- 33211078 , Bushing Part No.- 33219328 , Body Part No.- 33276648 , Impulse Cylinder Part No.- 33276778 , Idler Wheel Part No.- 33277938 , Plate Part No.- 34466128 , Bearing Bushing Part No.- 34497528 , Piston Part No.- 34570238 , Flange Part No.- 34571091 , Flange Part No.- 34571092 , Wing Nut Part No.- 41162190 , Circlip Part No.- 42207230 , Circlip Part No.- 42224130 , Circlip Part No.- 42229200 , O-Ring Part No.- 42870210 , Socket Set Screw Part No.- 44817010 , Lifting Eye Part No.- 44969770 , Lifting Eye Part No.- 44970150 , Spindle Part No.- 45378768 , Spring Part No.- 50077708 , Bearing Part No.- 51105310 , Deep Groove Bearing Part No.- 51110680 , Deep Groove Ball Bearing Part No.- 51110830 , Lock Nutrb Part No.- 51401020 , Lock Nut Part No.- 51401430 , Body Part No.- 51787978 , Control Valve Part No.- 51788033 , Contr.Non-Ret.Valve Part No.- 51788037 , O-Ring Part No.- 52203740 , O-Ring Part No.- 52205350 , O-Ring Part No.- 52205760 , O-Ring Part No.- 52206770 , O-Ring Part No.- 52207780 , O-Ring Part No.- 52209130 , O-Ring Part No.- 52209540 , O-Ring Part No.- 52210740 , O-Ring Part No.- 52211340 , O-Ring Part No.- 52213100 , O-Ring Part No.- 52213490 , O-Ring Part No.- 52214930 , O Ring Part No.- 52215120 , O-Ring Part No.- 52215380 , O-Ring Part No.- 52230000 , O-Ring Part No.- 52248000 , Electric Component Assembly Part No.- 55000703 , Bearing Bushing Part No.- 55000762 , Control Valve Part No.- 55001016 , Drilling Control Block Part No.- 55001418 , Cylinder Part No.- 55001440 , Feed Cylinder Part No.- 55001441 , Cylinder Tube Part No.- 55001444 , Piston Rod Part No.- 55001446 , Control Block Assembly Part No.- 55001530 , Valve Assembly Part No.- 55001557 , Control Valve Part No.- 55001671 , Guide Part No.- 55001827 , Bushing Part No.- 55002318 , Metallic Locking Plug Part No.- 55002404 , Metallic Lock-Nut Part No.- 55002406 , Plug Part No.- 55003257 , Valve Assembly Part No.- 55003262 , Low Pr.Accumulater Part No.- 55003625 , High Pr.Accmulater Part No.- 55003627 , Metallic Lock-Nut Part No.- 55003800 , Metallic Lock-Nut Part No.- 55003802 , Metallic Lock-Nut Part No.- 55003803 , Metallic Cable Gland Part No.- 55003816 , Metallic Cable Gland Part No.- 55003818 , Metallic Cable Gland Part No.- 55003819 , Jaw Part No.- 55003891 , Jaw Part No.- 55003893 , Cylinder Part No.- 55004192 , Gasket Plate Part No.- 55004226 , Pressure Switch Part No.- 55004367 , Gasket Part No.- 55004625 , Cylinder Part No.- 55004784 , Sign,Boom Movement Part No.- 55005104 , Pin Part No.- 55005365 , Lock Screw Part No.- 55005452 , Punch Part No.- 55005480 , Punch Part No.- 55005494 , Punch Part No.- 55005557 , Punch Part No.- 55005568 , Punch Part No.- 55005588 , Punch Part No.- 55005617 , Rod Part No.- 55005618 , Punch Part No.- 55005620 , Frame Assy Part No.- 55005639 , Punch Part No.- 55005657 , Punch Part No.- 55005730 , Stand Part No.- 55005864 , Metallic Locking Plug Part No.- 55005990 , Metallic Locking Plug Part No.- 55005992 , Return Autom. Control Block Part No.- 55006491 , Studpart No.- 55006590 , Special Tools Part No.- 55006739 , Mounting Support Part No.- 55006740 , Cable Entry Part No.- 55007608 , Metallic Cable Gland Part No.- 55008266 , O-Ring Part No.- 55009104 , O Ring Part No.- 55009105 , Plug Screw Part No.- 55009363 , Pin D40 Assy Part No.- 55009544 , Stopper Part No.- 55009884 , Punch Part No.- 55009924 , Punch Part No.- 55009931 , Bushing Part No.- 55010167 , Switching Bridge Part No.- 55010243 , Body Part No.- 55010331 , Punch Part No.- 55010396 , Support Part No.- 55012395 , Double Lock Washerrb Part No.- 55013058 , Collecting Piece Part No.- 55014390 , Male Contactrb Part No.- 55014882 , Femalecontactpart No.- 55014883 , Connector Part No.- 55014920 , O-Ring Part No.- 55015217 , Cylinder Assembly Part No.- 55016852 , Circuit Breaker Part No.- 55018347 , Control Valve Part No.- 55019338 , Pumppart No.- 55020849 , Cover Lens Part No.- 55020889 , Wear Piece Part No.- 55021564 , Locking Pin Part No.- 55021573 , Accessories For Connector Part No.- 55022410 , Seal Kit For Rock Drill Part No.- 55025293 , Flange Part No.- 55025462 , Suction Tunnel Part No.- 55025465 , Connector Part No.- 55025466 , Check Valve77790830 Part No.- 55028797 , Slide Piece Part No.- 55028850 , Return Filter Part No.- 55029508 , Lever Part No.- 55030221 , Seal Part No.- 55033745 , Bearing Bushing Part No.- 55035604 , Plastic Enclosure Part No.- 55036581 , Clogging Indicator Part No.- 55037834 , Valve Assy Part No.- 55037835 , Water Separator Part No.- 55037836 , Wire Rope Return Part No.- 55038501 , Connector For Gauge Part No.- 55038599 , Piston Rod Part No.- 55038998 , Piston Rod 50 Part No.- 55039050 , Punch Part No.- 55039870 , Mounting Plate Part No.- 55040996 , Valve Assem Part No.- 55041159 , Flange Part No.- 55041659 , Rubber Cover Part No.- 55041836 , Terminal Strip Accessory Part No.- 55042562 , Punch Part No.- 55043536 , Punch Part No.- 55043537 , Flange Part No.- 55043965 , Alternator 77008742 Part No.- 55045836 , Wear Piece, 1 3/4 Part No.- 55046860 , Emergency Stop Buttonpart No.- 55047182 , Contact Block Part No.- 55047276 , Contact Block Part No.- 55047278 , Emergency Stop Button Part No.- 55047291 , Pilot Light Part No.- 55047551 , Led-Light Part No.- 55047577 , Selector Switch Part No.- 55047660 , Stainless Steel Enclosure Part No.- 55048431 , Directional Valve Part No.- 55048556 , Control Valve Assembly Part No.- 55048601 , Push Buttonpart No.- 55048816 , Selector Switchpart No.- 55049086 , Selector Switchpart No.- 55049092 , Repair Kit Part No.- 55049759 , Pressure Relief Valve Part No.- 55049760 , Seal Kit Part No.- 55049761 , Flow Control Valve Part No.- 55049764 , Seal Kit Part No.- 55049765 , Seal Kit Part No.- 55049767 , Check Valve Assembly Part No.- 55049770 , Pressure Compensator Part No.- 55049771 , Seal Kit Part No.- 55049772 , Seal Kit Part No.- 55049773 , Torque Wrench Part No.- 55050013 , Coupling Part No.- 55050828 , Cylinder Cover Part No.- 55054070 , Piston Rod Guide Ring Part No.- 55054600 , Wiper Part No.- 55054602 , Seal Part No.- 55054603 , Seal Kit (Bom In Texts) Part No.- 55055045 , Term. Element Part No.- 55055778 , Pressure Gauge Part No.- 55055783 , Rotating Bushing Part No.- 55057798 , Flex Plate Assy Part No.- 55064747 , Flex Plate Assy Part No.- 55065122 , Backing Plate Part No.- 55065133 , Slyd Ring Part No.- 55066836 , Control Air Piping Part No.- 55071769 , Pressure Gauge Connector 73803401 Part No.- 55078851 , Cover Part No.- 55079564 , Housing, Belt Part No.- 55079566 , Thermostat Element Part No.- 55079946 , Regulator Part No.- 55084176 , Prioritet Valve Part No.- 55085201 , Gasket Part No.- 55085594 , Oil Glasspart No.- 55085596 , Piston Rod Part No.- 55085912 , Cylinder Tube Part No.- 55085916 , Bowl Part No.- 55086468 , Receiver Part No.- 55088402 , Pipe Part No.- 55095579 , Level Sight Indicator Part No.- 55096894 , Rubber Buffer Part No.- 55150127 , Mounting Plate Part No.- 55150159 , Tube, Cyclone Part No.- 55150557 , Seal Part No.- 55154614 , Mounting Piece Part No.- 55155027 , Support Part No.- 55155037 , Air Filter Part No.- 55155044 , Compressor,Tempest 3 Assembly Part No.- 55155210 , Body Part No.- 55155211 , Safety Valve Part No.- 55155215 , O-Ring Part No.- 55155216 , Motor Housing Part No.- 55155432 , Limiter Part No.- 55155433 , Fan Hub Part No.- 55155434 , Large Plain Washer Part No.- 55155447 , Oil Cooler Part No.- 55155449 , Seal Part No.- 55155450 , Cover Part No.- 55155452 , Wear Piece Part No.- 55174401 , Limit Bushing Part No.- 55194641 , Three-Phase Motor Part No.- 55198893 , Hydraulic Motor Part No.- 55205282 , Fuel Prefilter77008741 Part No.- 56006214 , Switch Gear Accessory Part No.- 56006491 , Accessories, Connector Part No.- 56016144 , O Ring Kit Part No.- 56030713 , Knob For Steering Wheel Part No.- 56039603 , Gasket Plate Part No.- 56040237 , Bushing Part No.- 59943148 , Brake Disc Part No.- 61445109 , Direct.Control Valve Part No.- 61481469 , Secondary Fuel Filter Element Part No.- 61507642 , Elbow Adapter Part No.- 62050460 , Socket Part No.- 62310480 , Brng Sphr Pln Shftpart No.- 64101552 , Bearing, Spherical Plain Shaft W/O H Part No.- 64101553 , Gasket Part No.- 64101666 , Pos.Batt.Terminal Part No.- 64105053 , Band Mounting, Air Cleaner Part No.- 64108451 , Seal, Grease Part No.- 64110237 , Elec. Starter-24Vpart No.- 64117328 , Element-Filter Part No.- 64117540 , T-Bolt Clamp 4.31-4.63 Part No.- 64117577 , Filter Insert Part No.- 64117900 , Push Button-Illuminated Part No.- 64118298 , Amplifier Valve Part No.- 64131210 , Speed Sensor Connector Part No.- 64132025 , Solenoid Block - 24 Vdc, Elec Shift Part No.- 64132053 , Return Filter Part No.- 64132189 , Replacement Element Part No.- 64132198 , Bearing Radial Ball90 Mm Part No.- 64400206 , Bearing Spherical Plain Shaft Part No.- 64400345 , Bearing, Spherical Plain Shaft W/O H Part No.- 64400346 , Socket Light Part No.- 64403025 , Jam Bolt, 1-8Unc Part No.- 64547622 , Pin Dump Cylinder Upper Part No.- 64548063 , Pin -Prop Tube, Lower Part No.- 64548734 , Parker Filter Element (64547162) Part No.- 64548737 , Pin - Upper Prop Tube, 522 Part No.- 64549053 , 8Mm Tube Assy, Trans Contl Part No.- 64550152 , 8Mm Tube Assy, Trans Contl Part No.- 64550153 , 8Mm Tube Assy, Trans Contl Part No.- 64550154 , 8Mm Tube Assy, Trans Contl Part No.- 64550155 , 8Mm Tube Assy, Trans Contl Part No.- 64550156 , 8Mm Tube Assy, Trans Contl Part No.- 64550157 , 10Mm Tube Assy, Trans Contl Part No.- 64550158 , 8Mm Tube Assy, Trans Contl Part No.- 64550159 , 10Mm Tube Assy, Lock-Up Drain Part No.- 64550216 , 10Mm Tube Assy, Lock-Up Pressure Part No.- 64550221 , Tube Assembly Part No.- 64551785 , Tube Assembly Part No.- 64551789 , Tube Assembly Part No.- 64551793 , Tube Assembly Part No.- 64551797 , Tube Assembly Part No.- 64551833 , Tube Assembly Part No.- 64551834 , Tube Assembly Part No.- 64551835 , Tube Assembly Part No.- 64552406 , Tube Assembly Part No.- 64552407 , Tube Assembly Part No.- 64552742 , Tube Assembly Part No.- 64552744 , Front Frame Tow Pin Part No.- 64553062 , Speedsensor, Hall Effect Part No.- 64559359 , Pressure Filter Assy 30P Part No.- 64560271 , Tube Assembly Part No.- 64569655 , Tube Assembly Part No.- 64569656 , Tube Assembly Part No.- 64569657 , Tube Assembly Part No.- 64569658 , Tube-Dump Valve Part No.- 64572131 , Tube-Dump Valve Part No.- 64572132 , Assy, Filler Pipe - Vented Part No.- 64572494 , Tube Assy-Brk Cooling Supply Part No.- 64574544 , Tube Assy-Brk Relay Vlv P.P. Part No.- 64574545 , Tube Assy-Brk Relay Vlv A Ln Part No.- 64574547 , 12Mm Tube Assembly Part No.- 64574619 , Tube Assy-Brk Relay Return Part No.- 64574620 , Tube Assy-Brk Cool Return Part No.- 64574621 , Tube Assembly Part No.- 64575195 , Tube Assembly Part No.- 64575196 , 10Mm Tube Assembly Part No.- 64575208 , 10Mm Tube Assembly Part No.- 64575209 , 10Mm Tube Assembly Part No.- 64575212 , 10Mm Tube Assembly Part No.- 64575213 , Tube Assembly Part No.- 64586467 , Tube Assembly Part No.- 64586481 , Tube Assembly Part No.- 64586485 , Tube Assembly Part No.- 64586790 , Tube Assembly Part No.- 64587110 , Fuel Filter/Water Separator Part No.- 64596638 , Tube Assy-Trans Cooler Rtn Part No.- 64603520 , Bearing, Self Aligning Part No.- 64803749 , Assy Kit Part No.- 66512918 , Key Switch Part No.- 66922530 , Bushing Part No.- 67009072 , Flash Part No.- 67011132 , Buzzer Part No.- 67011216 , Plug Part No.- 67014066 , Control Leverpart No.- 67153995 , Sheath Part No.- 67640963 , Bearing Radial Ball Part No.- 68050325 , Switch- Start/Stop Part No.- 68079308 , Switch Key Selector Part No.- 68079316 , Bearing Spherical Plain Shaft Part No.- 68117702 , Strainer Part No.- 69005201 , Element, Safety Part No.- 69008864 , By-Pass Gasket Part No.- 69034205 , Check Valve Part No.- 69034207 , Relief Valve Part No.- 69034216 , Throttle Check Valve Part No.- 69034228 , Sealing Ring Part No.- 69036306 , Fan Belt 77008743 Part No.- 69037934 , Breather Part No.- 69038045 , Brake Part No.- 69038466 , Inner Disk Part No.- 69038467 , Outer Disk Part No.- 69038468 , Gasket Part No.- 69038470 , Gasket Part No.- 69038471 , Face Seal Assy Part No.- 69038478 , Wheel Stud Part No.- 69038984 , Ring Part No.- 69038985 , Radial Seal Ring Part No.- 69038986 , Tapered Roller Bearing Part No.- 69038988 , Ring Part No.- 69038990 , O-Ring Part No.- 69038993 , Sun Gearpart No.- 69038995 , Ring Gear Carrier Part No.- 69039002 , O-Ring Part No.- 69039011 , O-Ring Part No.- 69039012 , Intermediate Piece Part No.- 69039017 , Piston Guide Ring Part No.- 69039018 , Tapered Roller Bearing Part No.- 69039037 , Bushing Part No.- 69039038 , Tapered Roller Bearing Part No.- 69039039 , Cover Part No.- 69039041 , Radial Seal Ring Part No.- 69039042 , Compensation Plate Part No.- 69039043 , Drive Flange Part No.- 69039044 , Bearing Part No.- 69039045 , O-Ring Part No.- 69039049 , Oring Part No.- 69039051 , Bevel Wheel Set Part No.- 69039944 , Axle Shaft Part No.- 69040318 , Diff Spider Part No.- 69040354 , Diff Pinion Part No.- 69040356 , Thrust Washer Part No.- 69040357 , Thrust Washer Part No.- 69040358 , Bushing Part No.- 69040359 , Circlip Part No.- 69040382 , Circlip Part No.- 69040383 , Fuel/Water Separator Element Part No.- 69041466 , Planetary Gear Drive Part No.- 69043482 , Pin Part No.- 70011773 , Pin Part No.- 70012023 , Pin Part No.- 70012133 , Pin Part No.- 70012171 , Pin Part No.- 70012173 , Pin Part No.- 70012210 , Pin Part No.- 70012228 , Pin Part No.- 70012231 , Pin Part No.- 70012232 , Pin Part No.- 70012235 , Pin Part No.- 70012245 , Pin Part No.- 70012257 , Pin Part No.- 70012271 , Pin Part No.- 70012272 , Pin Part No.- 70012277 , Pin Part No.- 70012294 , Pin Part No.- 70012295 , Pin Part No.- 70012296 , Pin Part No.- 70012297 , Pin Part No.- 70012299 , Pin Part No.- 70012330 , Pin Part No.- 70012332 , Gear Part No.- 70070682 , Gear Part No.- 70070688 , Gear Part No.- 70070703 , Chain Pinion Part No.- 70090393 , Chain Pinion Part No.- 70090394 , Piston Part No.- 70130095 , Piston Part No.- 70130120 , Segment Part No.- 70160033 , Valve Part No.- 70160037 , Bushing Part No.- 70180409 , Sleeve Part No.- 70180411 , Bushing Part No.- 70180412 , Bushing Part No.- 70180413 , Bushing Part No.- 70180419 , Bushing Part No.- 70180431 , Sleeve Part No.- 70180436 , Bushing Part No.- 70180440 , Sleeve Part No.- 70180448 , Sleeve Part No.- 70180449 , Ring Part No.- 70212436 , Bushing Part No.- 70212517 , Bushing Part No.- 70212573 , Sleeve Part No.- 70212586 , Sleeve Part No.- 70212607 , Bushing Part No.- 70212635 , Bushing Part No.- 70212638 , Bushing Part No.- 70212653 , Bushing Part No.- 70212654 , Bushing Part No.- 70212665 , Bushing Part No.- 70212674 , Bushing Part No.- 70212678 , Bushing Part No.- 70212681 , Bushing Part No.- 70212688 , Coupling Part No.- 70220761 , Coupling Sleeve Part No.- 70220780 , Drive Chuck Part No.- 70220787 , Pulley Part No.- 70250477 , Bushing Part No.- 70260742 , Bushing Part No.- 70260754 , Bushing Part No.- 70260755 , Bushing Part No.- 70260780 , Bushing Part No.- 70260781 , Shank Protector Part No.- 70271115 , Protector Part No.- 70271200 , Protector Part No.- 70271331 , Plug Part No.- 70281050 , Plug Part No.- 70281122 , Plug Part No.- 70281152 , Plug Part No.- 70281155 , Cover Part No.- 70281181 , Cover Part No.- 70281214 , Body Part No.- 70290444 , Drum Part No.- 70310036 , Frlange Check Part No.- 70350326 , Accumulator Cover Part No.- 70350327 , Flange Part No.- 70361440 , Frlange Fror Motor Part No.- 70361446 , Flange Part No.- 70361496 , Flange Part No.- 70361513 , Frlange Part No.- 70361544 , Rear Flange Part No.- 70361550 , Flange Part No.- 70361637 , Rear Flange Part No.- 70361772 , Flange Part No.- 70361808 , Spacer Part No.- 70391147 , Spacer Part No.- 70391155 , Washer Kit Part No.- 70391192 , Retainer Ring Part No.- 70400028 , Seal Part No.- 70410301 , Seal Part No.- 70410310 , Seal Part No.- 70410311 , Dust Seal Part No.- 70410317 , Seal Part No.- 70410319 , Seal Part No.- 70410320 , Seal Part No.- 70410326 , Stop Part No.- 70420416 , Stop Part No.- 70420507 , Shim Part No.- 70430511 , Shim Part No.- 70430512 , Shim Part No.- 70430513 , Shim Part No.- 70430530 , Shim Part No.- 70430531 , Skid Part No.- 70450658 , Skid Part No.- 70450662 , Skid Part No.- 70450663 , Skid Part No.- 70450670 , Skid Part No.- 70450671 , Guide Part No.- 70460765 , Plate Part No.- 70534232 , Plate Part No.- 70534233 , Plate Part No.- 70534382 , Plate Part No.- 70534414 , Yoke Part No.- 70541265 , Yoke Part No.- 70541309 , Yoke Part No.- 70541313 , Tenon Part No.- 70560453 , Bracket Part No.- 70593845 , Support Part No.- 70593846 , Support Part No.- 70594433 , Centralizer Support Part No.- 70594437 , Cradle Support Part No.- 70594439 , Support Part No.- 70594813 , Yoke Support Part No.- 70595179 , Support Part No.- 70595367 , Exhaust Support Part No.- 70595422 , Tie Rod Part No.- 70620848 , Spanner Part No.- 70650137 , Spanner Part No.- 70650148 , Spanner Part No.- 70650149 , Dowel Part No.- 70720174 , Dowel Part No.- 70720203 , Stud Part No.- 70730177 , Stud Part No.- 70730199 , Stride Part No.- 70750034 , Check Valve Part No.- 70770039 , Valve Seat Part No.- 70790090 , Union Part No.- 70801048 , Union Part No.- 70801055 , Union Part No.- 70801093 , Union Part No.- 70801166 , Union Part No.- 70801187 , Union Part No.- 70801190 , Union Part No.- 70801192 , Union Part No.- 70801243 , Pipe Part No.- 70821125 , Tube Part No.- 70821261 , Air Intake Hose Part No.- 70821269 , Tube Part No.- 70821270 , Exhaust Pipepart No.- 70821277 , Spring Part No.- 70880071 , Spring Part No.- 70880239 , Hook Part No.- 70930034 , Cable Clamp Part No.- 70930035 , Decal Part No.- 70960062 , Decal Part No.- 70960063 , Decal Part No.- 70960081 , Decal Part No.- 70960241 , Decal Part No.- 70960288 , Decal Part No.- 70960289 , Decal Part No.- 70960435 , Decal Part No.- 70960471 , Decal Part No.- 70960474 , Decal Part No.- 70960479 , Decal Part No.- 70961771 , Decal Part No.- 70961828 , Decal Part No.- 70961829 , Decal Part No.- 70961832 , Decal Part No.- 70961847 , Decal Part No.- 70961852 , Decal Part No.- 70961870 , Decal Part No.- 70961943 , Decal Part No.- 70961944 , Valve Part No.- 71010158 , Air Regulator Part No.- 71010219 , Cable Reel Part No.- 71020156 , Brush Part No.- 71020612 , Brush Holder Part No.- 71020648 , Brush Holder Part No.- 71020870 , Brush Holder Part No.- 71020871 , Collector Part No.- 71020901 , Collector Part No.- 71020902 , Tube Part No.- 71020911 , Ring Kit Part No.- 71020930 , Ring Assy Part No.- 71020931 , Plug Part No.- 71021004 , Swing Crown Wheelpart No.- 71036002 , Shaft + Bolts Part No.- 71055030 , Flange Part No.- 71055032 , Pressure Acumulators Part No.- 71055042 , Wheel Nut Part No.- 71055050 , Stud Part No.- 71055060 , Flange Part No.- 71055070 , Bevel Gear Part No.- 71055080 , Flexor Part No.- 71062081 , Drop Gear Part No.- 71081093 , Seal Part No.- 71081554 , Cooler Part No.- 71160701 , Seal Kit Part No.- 71160750 , Cover Kit Part No.- 71160751 , Half-Bushing Part No.- 71190635 , U Joint Part No.- 71190790 , U Joint Part No.- 71190812 , Switch Part No.- 71191220 , Seal Part No.- 71191253 , Key Switch Part No.- 71191275 , Electric Stop Part No.- 71192300 , Solenoid Valve Part No.- 71192350 , Oil Filterpart No.- 71194347 , Ring Part No.- 71194832 , Union Part No.- 71194833 , Socket Part No.- 71194845 , Fuel Filter Part No.- 71195003 , Fuel Filter Part No.- 71198830 , Alternator Part No.- 71198831 , Belt Part No.- 71198832 , Belt Tensioner Part No.- 71198833 , Oil Filter Part No.- 71198836 , Starter 77008745 Part No.- 71198847 , Oil Pressure Transmitter Part No.- 71198849 , Base Part No.- 71199081 , Coupling Sleeve Part No.- 71199791 , Throttle Cable Part No.- 71210405 , Bushing Part No.- 71402470 , Ball Joint Part No.- 71407140 , Knee Joint Fitting Part No.- 71407192 , End Piece Part No.- 71407430 , Ball Joint Part No.- 71407440 , Ball Joint Part No.- 71407550 , Ball Joint Part No.- 71407560 , Ball Joint Part No.- 71407580 , Bearing Part No.- 71503304 , Bearing Part No.- 71546206 , Tappered Roller Bearing Part No.- 71923310 , Stainless Steel Tube Part No.- 72203476 , Steel Pipe Part No.- 72205003 , Threaded Rod Part No.- 72207056 , Blocking Taper Part No.- 73060150 , Blocking Taper Part No.- 73060155 , Blocking Taper Part No.- 73060160 , Blocking Taper Part No.- 73060170 , Blocking Taper Part No.- 73060185 , Wheel Assembly Part No.- 73101198 , Rim Part No.- 73101556 , Rim Part No.- 73101567 , Ball Valve Part No.- 73150204 , Ball Valve Part No.- 73150226 , Ball Valve Part No.- 73150514 , Flow Controler Part No.- 73153300 , Flow Controler Part No.- 73153301 , Electric Parts Set Part No.- 73153350 , Ring Part No.- 73213055 , Coupling Part No.- 73225511 , Pump Hub Part No.- 73225512 , Coupling Part No.- 73225700 , Coupling Part No.- 73225701 , Coupling Part No.- 73225703 , Flange Check Part No.- 73225750 , Coupling Part No.- 73226008 , Plug Part No.- 73280265 , Plug Part No.- 73281026 , Plug Part No.- 73282501 , Plug Part No.- 73282503 , Plug Part No.- 73282505 , Plug Part No.- 73282506 , Plug Part No.- 73282507 , Plug Part No.- 73283231 , Plug Part No.- 73283232 , Plug Part No.- 73283235 , Plug Part No.- 73284101 , Plug Part No.- 73284102 , Plug Part No.- 73284103 , Plug Part No.- 73284104 , Plug Part No.- 73288003 , Gauge Part No.- 73331004 , Gauge Part No.- 73331009 , Gauge Part No.- 73331014 , Gauge Part No.- 73331022 , Flange Part No.- 73360511 , Bracket Part No.- 73360512 , Frlange Part No.- 73360517 , Flange Part No.- 73360518 , Flange Part No.- 73360521 , Flange Fitting Part No.- 73360915 , Flange Part No.- 73361002 , Flange Part No.- 73361004 , Ball Part No.- 73370510 , Circlip Part No.- 73400162 , Circlip Part No.- 73400205 , Ring Part No.- 73403338 , Seal Part No.- 73411111 , Seal Part No.- 73411116 , Seal Part No.- 73411131 , Seal Part No.- 73411212 , Seal Part No.- 73411217 , Seal Ring Part No.- 73411616 , Seal Ring Part No.- 73411704 , Seal Ring Part No.- 73411716 , Seal Ring Part No.- 73411728 , Ring Part No.- 73411732 , Seal Part No.- 73411832 , Seal Part No.- 73412955 , Seal Part No.- 73412965 , Seal Part No.- 73412980 , Seal Part No.- 73413214 , Seal Part No.- 73413222 , Seal Part No.- 73413224 , Seal Part No.- 73413290 , Seal Part No.- 73413544 , O Ring Part No.- 73414092 , Ring Part No.- 73414156 , O Ring Part No.- 73414176 , O Ring Part No.- 73414202 , O Ring Part No.- 73414216 , O Ring Part No.- 73414232 , O Ring Part No.- 73414236 , O Ring Part No.- 73414272 , O Ring Part No.- 73414368 , O Ring Part No.- 73414440 , O Ring Part No.- 73414458 , O Ring Part No.- 73414588 , O Ring Part No.- 73414612 , O Ring Part No.- 73414672 , O-Ring Part No.- 73414688 , O Ring Part No.- 73414712 , O Ring Part No.- 73414714 , O Ring Part No.- 73414834 , O Ring Part No.- 73415018 , O Ring Part No.- 73415030 , O Ring Part No.- 73415044 , O Ring Part No.- 73415050 , O Ring Part No.- 73415058 , O Ring Part No.- 73415060 , O Ring Part No.- 73415066 , O Ring Part No.- 73415078 , O Ring Part No.- 73415088 , Bushing Part No.- 73415154 , Bushing Part No.- 73415168 , O Ring Part No.- 73415170 , Bushing Part No.- 73415448 , O-Ring Part No.- 73415480 , Seal Part No.- 73417234 , Seal Part No.- 73417256 , Seal Kit Part No.- 73417510 , Seal Kit Part No.- 73417520 , Backup Ring Part No.- 73418726 , Backup Ring Part No.- 73418727 , Backup Ring Part No.- 73418728 , Seal Part No.- 73418750 , O Ring Part No.- 73418773 , Seal Kit Part No.- 73418781 , Repair Kit Part No.- 73418782 , Seal Part No.- 73419310 , Seal Part No.- 73419312 , Seal Part No.- 73419314 , Rod Seal Part No.- 73419757 , Piston Seal Part No.- 73419761 , Rod Seal Part No.- 73419914 , Seal Part No.- 73419950 , Seal Part No.- 73419951 , Decal Part No.- 73530352 , Yoke Assy Part No.- 73540406 , Hinge Part No.- 73551001 , Fastener Part No.- 73551100 , Spanner Ll = 160 Mm Part No.- 73650716 , Pin Part No.- 73730180 , Pin Part No.- 73730254 , Elastic Pin Part No.- 73730258 , Pin Part No.- 73732015 , Pin Part No.- 73732158 , Ribbed Pin Part No.- 73732578 , Pin Part No.- 73735858 , Pin Part No.- 73735916 , Pin Part No.- 73735992 , Pin Part No.- 73736026 , Safety Valve Part No.- 73770106 , Safety Valve Part No.- 73770108 , Press.Reducing Valve Part No.- 73770151 , Press.Reducing Valve Part No.- 73770152 , Caliper Part No.- 73770192 , Spring Part No.- 73770193 , Check Valve Part No.- 73770304 , Screen Part No.- 73772000 , Seat Part No.- 73790505 , Jet Part No.- 73800203 , Jet Part No.- 73800206 , Jet Part No.- 73800210 , Jet Part No.- 73800238 , Jet Part No.- 73800248 , Tee Part No.- 73802758 , Elbow Part No.- 73802835 , Union Part No.- 73804034 , Reducer Part No.- 73804184 , Hand Pump Part No.- 73804204 , Union Part No.- 73806506 , Plug + Small Chain Part No.- 73806536 , Union Part No.- 73806551 , Long Straight Fitting Part No.- 73808408 , Union Part No.- 73809203 , Union Part No.- 73809891 , Collar Part No.- 73810103 , Collar Part No.- 73810107 , Collar Part No.- 73810109 , Collar Part No.- 73810128 , Detachable Link Part No.- 73810552 , Chain Part No.- 73810562 , Chain (Box Of 5 M) Part No.- 73812021 , Chain (Box Of 5 M) Part No.- 73812023 , Link Part No.- 73812101 , Link Part No.- 73812114 , Strap Part No.- 73812778 , Collar Part No.- 73813352 , Strap Part No.- 73813354 , Collar Part No.- 73813356 , Strap Part No.- 73814170 , Strap Part No.- 73814190 , Spiral Sheath (Box Of 5 M) Part No.- 73821211 , Spiral Sheath (Box Of 5 M) Part No.- 73821225 , Air Hose Part No.- 73824802 , Water Filter Part No.- 73830913 , Water Filter Part No.- 73830960 , Strainer Part No.- 73830991 , Breather Part No.- 73831002 , Filter Part No.- 73831130 , Safety Cartridge Part No.- 73831153 , Air Filterpart No.- 73831155 , Percussion Filter Part No.- 73832443 , Filter Element Part No.- 73833257 , Sight Indicator Part No.- 73833300 , Level Part No.- 73833303 , Electric Level Part No.- 73833304 , Suspension Part No.- 73880110 , Contact Part No.- 73880133 , Support Part No.- 73880139 , Spring Part No.- 73882402 , Wire Rope Part No.- 73930812 , Working Light Part No.- 74011221 , Master Switch Part No.- 74011320 , Alternator Part No.- 74021042 , Regulator Part No.- 74021064 , Relay Part No.- 74021071 , Relay Part No.- 74021082 , Clogging Indicator Part No.- 74022005 , Switch Part No.- 74030100 , Electric Motor Part No.- 74031842 , Electric Cable Part No.- 74032061 , Brass Plug Part No.- 74032502 , Lock Nut Part No.- 74032568 , Reducer Part No.- 74032610 , Amplifier Part No.- 74032670 , Electric Cable Part No.- 74034350 , Wire Part No.- 74034363 , Wire Part No.- 74034371 , Overload Relay Part No.- 74036202 , Pilot Relay Part No.- 74036500 , Sheath Part No.- 74038311 , Cap Part No.- 74038321 , Seal Part No.- 74038341 , Coupling Part No.- 74038361 , Overload Relay Part No.- 74041002 , Overload Relay Part No.- 74041005 , Socket For Overload Relay Part No.- 74041021 , Transformer Part No.- 74060226 , Hood Part No.- 74081020 , Joy Stick Part No.- 74082000 , Overload Relay Part No.- 74131540 , Overload Relay Part No.- 74131542 , Overload Relay Part No.- 74131546 , Relay Part No.- 74131580 , Ring Part No.- 74131591 , Fuse Cartridge Part No.- 74140009 , Plate Part No.- 74165000 , Stop Part No.- 74165001 , Terminal Block Part No.- 74165007 , Relay Module Part No.- 74165014 , Terminal Block Part No.- 74165019 , Connection Terminal Part No.- 74165020 , Connector Part No.- 74165021 , Connection Terminal Part No.- 74165025 , Diode Part No.- 74165027 , Relay Part No.- 74165028 , Connecting Block Part No.- 74165060 , Plate Part No.- 74165070 , Switch Part No.- 74165081 , Switch Part No.- 74165082 , Rail Adaptor Part No.- 74165090 , Connector Part No.- 74165091 , Connector Part No.- 74165092 , Plate Part No.- 74165094 , Resistance Part No.- 74184033 , Buzzer Part No.- 74185010 , Feed Chute Part No.- 74190970 , Feed Chute Part No.- 74190971 , Breather Part No.- 74191320 , Capacitor Part No.- 74196002 , Diode Part No.- 74196052 , Gland Part No.- 74196130 , Wire Rope Part No.- 74196176 , Wire Rope Part No.- 74196177 , Relay Part No.- 74196180 , Sheath Part No.- 74196192 , Sheath Part No.- 74196193 , Switch Part No.- 74196290 , Hood Part No.- 74196417 , Base Plate Part No.- 74196426 , Base Plate Part No.- 74196427 , Male Plug Part No.- 74196433 , Male Plug Part No.- 74196434 , Male Plug Part No.- 74196439 , Female Plug Part No.- 74196443 , Female Plug Part No.- 74196444 , Female Plug Part No.- 74196445 , Female Plug Part No.- 74196449 , Female Support Part No.- 74196492 , Union Part No.- 74196511 , Male Plug Part No.- 74196581 , Male Plug Part No.- 74196582 , Spindle Part No.- 74196600 , Socket Part No.- 74196601 , Electric Cable Part No.- 74196610 , Gland Part No.- 74196642 , Connector Part No.- 74196650 , Support Part No.- 74200598 , Signalling Lamp Part No.- 74200940 , Signalling Lamp Part No.- 74200941 , Signalling Lamp Part No.- 74200945 , Push Button Part No.- 74201005 , Push Button Part No.- 74201009 , Push Button Part No.- 74201013 , Plug Part No.- 74201021 , Commutator Head Part No.- 74201083 , Switch Part No.- 74201132 , Switch Part No.- 74201133 , Switch Part No.- 74201144 , Guard Part No.- 74201163 , End Piece,Cable Part No.- 74201337 , End Piece,Cable Part No.- 74201339 , Profile Dinomega Part No.- 74201396 , Switch Block Part No.- 74201541 , Switch Block Part No.- 74201542 , Block Part No.- 74201610 , Block Part No.- 74201611 , Contactor Part No.- 74201620 , Relay Part No.- 74201675 , Relay Part No.- 74201688 , Contactor Part No.- 74201690 , Contactor Part No.- 74201691 , Contactor Part No.- 74201692 , Relay Part No.- 74201730 , Overload Relay Part No.- 74202230 , Overload Relay Part No.- 74202231 , Switch Block Part No.- 74202262 , Block Part No.- 74202271 , Union Brush Part No.- 74202272 , Relay Part No.- 74202280 , Relay Part No.- 74202282 , Contactor Part No.- 74202291 , Contactor Part No.- 74202292 , Connector Part No.- 74203950 , Switch Part No.- 74205102 , Gauge Part No.- 74830100 , Gauge Part No.- 74830111 , Pin Part No.- 75013163 , Piston Part No.- 75133143 , Piston Part No.- 75133158 , Piston Part No.- 75133159 , Bushing Part No.- 75212024 , Ring Part No.- 75212042 , Hood Part No.- 75272001 , Hood Part No.- 75272002 , Bushing Part No.- 75462032 , Guide Part No.- 75463235 , Guide Part No.- 75463238 , Plate Part No.- 75532011 , Rod Part No.- 75622178 , Rod Part No.- 75622243 , Rod Part No.- 75622294 , Rod Part No.- 75622296 , Rod Part No.- 75625377 , Rod Part No.- 75625381 , Rod Part No.- 75625388 , Spacer Part No.- 75900061 , Joy Stick Part No.- 76070005 , Protector Part No.- 76130139 , Seal Kit Part No.- 76130162 , Kit Part No.- 76130168 , Control Valve Part No.- 76130169 , Cylinder Ni/Chromium Part No.- 76310086 , Hydraulic Cylinder Ni/Chromium Part No.- 76310091 , Cylinder Part No.- 76310098 , Cylinder Part No.- 76315506 , Cylinder Part No.- 76315601 , Cylinder Part No.- 76318069 , Cylinder Part No.- 76318072 , Ball Part No.- 76650100 , Lever Rod Part No.- 76711213 , Check Valve Part No.- 76771790 , Control Valve Part No.- 77005027 , Control Valve Part No.- 77005036 , Charging Valve Part No.- 77005121 , Gear Part No.- 77005187 , Lever Box Part No.- 77005401 , Valve Section Part No.- 77005542 , Lever Part No.- 77005543 , Relief Valve Part No.- 77005544 , Seal Kit Part No.- 77005546 , Spring Return Kit Part No.- 77005547 , Valve Section Part No.- 77005560 , Pressure Valve Part No.- 77005563 , Solenoid Part No.- 77005581 , Control Panel 77012426 Part No.- 77005613 , Prewire Connectorpart No.- 77005681 , Coil Part No.- 77005771 , Main Switch Pin Part No.- 77005772 , Power Relay Part No.- 77005785 , Lock Device Part No.- 77005789 , Female Connector Part No.- 77005951 , Coupling Part No.- 77006025 , Water Pump Part No.- 77006073 , Water Pump Group Part No.- 77006074 , Pin Part Set Part No.- 77006076 , Repair Kit Part No.- 77006108 , Water Pump Spare Kit Part No.- 77006109 , Water Pump Spare Kit Part No.- 77006112 , Relay Part No.- 77006154 , Dampening Piston Part No.- 77006326 , Fuel Gauge Part No.- 77006416 , Protector Part No.- 77006473 , Shaft Seal Part No.- 77006481 , Ring Part No.- 77006482 , Hub Oscillating Axle Part No.- 77006483 , Special Nut Part No.- 77006487 , Axle Housing Part No.- 77006535 , Housing Part No.- 77006536 , Housing Part No.- 77006537 , Disc Assy Part No.- 77006538 , Disc Intermediate Part No.- 77006539 , Disc Assy Part No.- 77006540 , Ball/Roller Part No.- 77006542 , Spring Part No.- 77006543 , Pin Cotter 1/8X 1 Part No.- 77006546 , Seal Assy Part No.- 77006548 , Water Pump Impeller Part No.- 77006825 , Seal Kit Part No.- 77007011 , Air Filter Assy Part No.- 77007054 , Air Filterpart No.- 77007055 , Safety Cartridge Part No.- 77007056 , Bracket Assy Part No.- 77007058 , Turbo Kit Part No.- 77007206 , Gasket Part No.- 77007208 , Seal Part No.- 77007209 , O-Ring Part No.- 77007211 , O-Ring Part No.- 77007212 , Stud Part No.- 77007217 , Brake Control Rod Part No.- 77007220 , Plug Part No.- 77007221 , Planet Gear Part No.- 77007222 , Bearing Cup Part No.- 77007223 , O-Ring Part No.- 77007224 , Stud Part No.- 77007225 , Bearing Taper Part No.- 77007228 , Bearing Cage Part No.- 77007233 , Bearing Cup Part No.- 77007234 , Shaft Part No.- 77007235 , Gear Part No.- 77007236 , Shaft Part No.- 77007240 , Bearing Cup Part No.- 77007242 , Bearing Cup Part No.- 77007243 , Bearing Cage Part No.- 77007244 , Bearing Cage Part No.- 77007245 , Ball Bearing Part No.- 77007258 , Bearing Cup Part No.- 77007259 , O-Ring Part No.- 77007263 , Bearing Taper Part No.- 77007264 , Gear Part No.- 77007268 , Spring Part No.- 77007269 , Spring Part No.- 77007278 , Plug Part No.- 77007290 , Spring Part No.- 77007302 , Plug Part No.- 77007304 , Collar Part No.- 77007305 , Bearing Taper*Pls See T-Text* Part No.- 77007319 , Bearing Cage Part No.- 77007320 , Plug Part No.- 77007323 , Shim Part No.- 77007324 , Backing Ring Part No.- 77007329 , Pin Part No.- 77007330 , Shim Part No.- 77007331 , Differential Cross Part No.- 77007335 , Snap Ring Part No.- 77007336 , Backing Ring Part No.- 77007337 , Shim Part No.- 77007340 , No-Spin Part No.- 77007341 , Drilling Cradle Part No.- 77007357 , Cradle Part No.- 77007375 , Traming Control Block Part No.- 77007555 , Shuttle Valvepart No.- 77007556 , Pilot Control Valve Part No.- 77007557 , Pilot Control Valve Part No.- 77007558 , Solenoid Part No.- 77007561 , Solenoid Part No.- 77007562 , Seal Kit Part No.- 77007563 , Seal Kit Part No.- 77007564 , Seal Kitpart No.- 77007565 , Seal Kit Part No.- 77007574 , Gear Part No.- 77007680 , Gear Part No.- 77007684 , Support Part No.- 77007728 , Support Part No.- 77007729 , Decal Part No.- 77007842 , Braking Block Part No.- 77007935 , Seal Kit Part No.- 77007951 , Ball Bearing Part No.- 77008141 , Spacer Part No.- 77008150 , Ball Bearing Part No.- 77008154 , Cover Part No.- 77008158 , O-Ring Part No.- 77008160 , Nut Part No.- 77008162 , Seal Part No.- 77008164 , Spacer Part No.- 77008170 , Gear Part No.- 77008175 , Water Hose Part No.- 77008395 , Mounting Supportpart No.- 77008458 , Gear Pump Part No.- 77008463 , Radiator Core Part No.- 77008724 , Shock Absorber (Set Of 4 Pcs) Part No.- 77008726 , Tensioner Part No.- 77008744 , Fuel Hose Part No.- 77009057 , Pin Part No.- 77009393 , Signal Resistor Part No.- 77009422 , Gear Pump Part No.- 77009694 , Bushing Part No.- 77009697 , Seal Part No.- 77009698 , Clevis Pin Part No.- 77010355 , Discs Kitpart No.- 77010896 , Bearingpart No.- 77010897 , Female Multipole Connector Part No.- 77010959 , Speed Up Pedal Part No.- 77010961 , Filter Hp Part No.- 77011121 , Filter Elementpart No.- 77011123 , Clogging Indicator Part No.- 77011409 , Pipe Part No.- 77011464 , Breatherpart No.- 77011541 , Switch Part No.- 77011633 , Fuel Gauge Part No.- 77011777 , Exhaust Pipe Part No.- 77011964 , Relay Part No.- 77012116 , Flash Lightpart No.- 77012289 , Red Patch Part No.- 77012359 , Decal Part No.- 77012360 , Push Button Part No.- 77012373 , Timer Part No.- 77012387 , Fuse (Box Of 100 Pcs) Part No.- 77012392 , Fuse (Box Of 100 Pcs) Part No.- 77012393 , Fuse (Box Of 100 Pcs) Part No.- 77012394 , Diode Part No.- 77012395 , Flash Light 24Vdc Part No.- 77012538 , Control Assembly Part No.- 77012789 , Cooler Part No.- 77012838 , Cooler Housing Part No.- 77012886 , Radiator Part No.- 77012887 , Fan Guard Part No.- 77012888 , Fan Part No.- 77012889 , Seat Part No.- 77013044 , Connector Deutz 10 Pins Part No.- 77014359 , Flat Belt Part No.- 77014803 , Breather Part No.- 77015769 , Push Button Part No.- 77015991 , Push Button Part No.- 77015992 , Pressure Button Part No.- 77015998 , Gear Pump Part No.- 77017417 , Seal Kit Part No.- 77017602 , Relay Part No.- 77021759 , Coil Part No.- 77650181 , Control Valve Part No.- 77650340 , Control Valve Part No.- 77650351 , Control Valve Part No.- 77650360 , Pump Part No.- 77720050 , Hyd. Pump.16Cm3/T Part No.- 77720322 , Manual Pump Part No.- 77720325 , Copper Sealpart No.- 77720642 , Flow Divider Part No.- 77722056 , Spring Part No.- 77722149 , Seal Kit Part No.- 77722590 , Seal Kit Part No.- 77722591 , Seal Kit Part No.- 77722592 , Body Part No.- 77722700 , Body Part No.- 77722704 , Cover Part No.- 77722850 , Hydraulic Pump Part No.- 77724200 , Hydraulic Motor Part No.- 77724251 , Solenoid Coil Part No.- 77724305 , Plate Part No.- 77724306 , Hydraulic Control Part No.- 77724324 , Valve Part No.- 77724327 , Double Check Valve Part No.- 77728701 , Double Check Valve Part No.- 77728702 , Check Valve Part No.- 77728705 , Valve,Check Part No.- 77728871 , Check Valve Part No.- 77728872 , Check Valve Part No.- 77728873 , Check Valve Part No.- 77728901 , Flow Regulator Part No.- 77728910 , Regulator Part No.- 77729051 , Reliefr Valve Part No.- 77729265 , Selector Part No.- 77729300 , Check Valve Part No.- 77729800 , Uncharged Accumulator Part No.- 77750111 , Diaphragm Part No.- 77750262 , Seal Kit Part No.- 77750266 , Seal Kitno More Supply Part No.- 77750272 , Hydraulic Motor Part No.- 77750656 , Steering Column Part No.- 77750660 , Hydraulic Motor Part No.- 77750668 , Hydraulic Motor Part No.- 77750675 , Control Valve Part No.- 77750912 , Hydraulic Pump Part No.- 77760518 , Wheel Motor Part No.- 77760549 , Wheel Motor Part No.- 77760557 , Check Valve Part No.- 77760601 , Seal Kit Part No.- 77760681 , Pump Kit Part No.- 77760690 , Inching Pedal Part No.- 77760713 , Set Of 10 Nuts Part No.- 77760777 , Seal Kit Part No.- 77760778 , Set Of 10 Studs Part No.- 77760779 , Brake Part No.- 77760792 , Brake Kitpart No.- 77760793 , Seal Kit Part No.- 77760794 , Hydraulic Motor Part No.- 77761151 , Propeller Part No.- 77761152 , Hydraulic Pump Part No.- 77790014 , Hydraulic Motor Part No.- 77790052 , Seal Kit Part No.- 77790080 , Control Valve Part No.- 77790127 , Relief Valve Part No.- 77790143 , Repair Kit Part No.- 77791950 , Coupling Part No.- 77791963 , End Piece Cable Part No.- 77792860 , Pressure Switch Part No.- 77792872 , Lever Part No.- 77793000 , Seal Kit Part No.- 77793043 , Pump Part No.- 77794226 , Hydraulic Pump Part No.- 77794227 , Pump Kit Part No.- 77794272 , Valve Part No.- 77794273 , Valve Part No.- 77794274 , Relief Valve Part No.- 77794275 , Cartridge Part No.- 77794276 , Seal Kit Part No.- 77794277 , Front Head Part No.- 78050348 , Supply Flange Kit Part No.- 78064022 , Flushing Head Water Injection Tube Part No.- 78090652 , Flushing Head Part No.- 78090653 , Pressure Switch Part No.- 78090727 , Air Flushing Part No.- 78090780 , Water Flushing Head Part No.- 78090797 , Flushing Head Part Set Part No.- 78091541 , Gauge 0-60 Part No.- 78144161 , Percussion Filter Part No.- 78144163 , Valve Part No.- 78144172 , Accumulator Uncharged Part No.- 78217217 , Stabilising Jack Part No.- 78310165 , Relief Valve Part No.- 78320267 , Hydraulic Pump Part No.- 78320397 , Cooler Part No.- 78320461 , Sequence Valve Part No.- 78320517 , Check Valve Part No.- 78320556 , Pump Part No.- 78320633 , Hydraulic Pump Part No.- 78320639 , Check Valve Part No.- 78320651 , Check Valve Part No.- 78320711 , Hydraulic Pump Part No.- 78320715 , Manual Relief Valve Part No.- 78320753 , Control Bloc Part No.- 78320782 , Warning Light Part No.- 78320809 , Control Block Assy Part No.- 78323271 , Wire Assy Part No.- 78332057 , Wire Assy Part No.- 78332064 , Wire Assy Part No.- 78332140 , Wire Assy Part No.- 78332156 , Wire Assy Part No.- 78333055 , Wire Assy Part No.- 78333097 , Wire Assy Part No.- 78333134 , Harness Part No.- 78333145 , Wire Assy Part No.- 78333505 , Wire Assy Part No.- 78337055 , Wire Assy Part No.- 78337061 , Harness Part No.- 78337068 , Harness Part No.- 78337071 , Harness Part No.- 78337107 , Rockdrill Tools Part No.- 78340026 , Rockdrill Tools Part No.- 78340034 , Seal Kit Part No.- 78400839 , Seal Kit Part No.- 78400965 , Seal Kit Part No.- 78401076 , Replace Kit Part No.- 78401150 , Gear+Sleeve Kit Part No.- 78401170 , Seal Kit Part No.- 78401274 , Seal Kit Part No.- 78401284 , Seal Kit Part No.- 78401285 , Seal Kit Part No.- 78401287 , Seal Kit Part No.- 78401288 , Seal Kit Part No.- 78401289 , Seal Kit Part No.- 78401295 , Seal Kit Part No.- 78401315 , Seal Kit Part No.- 78401334 , Seal Kit Part No.- 78401337 , Seal Kit Part No.- 78401384 , Air Filter Kit Part No.- 78401499 , Indicator Kit Part No.- 78401630 , Diaphragm Kit Part No.- 78401789 , Sleeve+Seal Kit Part No.- 78401810 , Accumulator Kit ( Replaces 8217269) Part No.- 78401815 , Seal Kit Part No.- 78401867 , Seal Kit Part No.- 78401889 , Seal Part No.- 78401903 , Seal Part No.- 78401904 , Seal Kit Part No.- 78401923 , Seal Kit Part No.- 78401931 , Seal Kit Part No.- 78401936 , Cylinder 76310090 Part No.- 78402027 , Seal Kit Part No.- 78402038 , Housing Kit Part No.- 78402041 , Rectifier Part No.- 78402074 , Gear Kit Part No.- 78402149 , Decal Kit Part No.- 78402228 , Expendable Pin P/Set Part No.- 78407016 , Expendable Pin P/Set Part No.- 78407017 , Expendable Pin P/Set Part No.- 78407065 , Pin Parts Set Part No.- 78407066 , Expendable Pin P/Set Part No.- 78407069 , Pin Kit Part No.- 78407074 , Pin Parts Set Part No.- 78407101 , Stop Diesel Part No.- 78408133 , Detector Part No.- 78408435 , Cartridge Part No.- 78410284 , Control Valve Part No.- 78410310 , Relief Valve Part No.- 78410368 , Relief Valve Part No.- 78410372 , Relief Valve Part No.- 78410421 , Valve Part No.- 78410466 , Coupling Assy Part No.- 78410518 , Driveline Part No.- 78410552 , Driveline Part No.- 78410553 , Motor Kit Part No.- 78410572 , H200/H300 Motor 125 Cm3 Part No.- 78410574 , X2 Motor Part No.- 78410578 , Socket Part No.- 79170127 , Sleeve Part No.- 79180001 , Control Block Manifrl Part No.- 79290033 , Body Part No.- 79290100 , X2 Flushing Head Part No.- 79290120 , Flange Part No.- 79360029 , Yoke Part No.- 79540109 , Yoke Part No.- 79540138 , Yoke Part No.- 79540157 , Yoke Part No.- 79540164 , Tenon Part No.- 79560036 , Tenon Part No.- 79560044 , Support Part No.- 79590246 , Bracket Part No.- 79590335 , Pipe Part No.- 79820515 , Pipe Part No.- 79820557 , Purifier Part No.- 79820559 , Extension Tube Part No.- 79820602 , Split Pin Part No.- 80007869 , Circlip Part No.- 80011019 , O-Ring Part No.- 80011839 , O-Ring Part No.- 80011969 , Spherical Plain Bearing Part No.- 80012719 , Spring Pin Part No.- 80014049 , Ball Valve Part No.- 80015619 , Shrink Plastic 74038441 Part No.- 80023069 , Star Washer Part No.- 80024639 , Elbow Part No.- 80034539 , Usit-Seal Part No.- 80034799 , Usit Seal Part No.- 80034819 , Seal Part No.- 80034949 , Slotted Screw Part No.- 80061749 , O-Ring Part No.- 80065809 , O-Ring Part No.- 80065939 , Band Part No.- 80071109 , O-Ring Part No.- 80081679 , Slotted Screw Part No.- 80082559 , Slotted Screw Part No.- 80091579 , Usit-Seal Part No.- 80103149 , Lock Nut Part No.- 80130109 , O Ring Part No.- 80136849 , O-Ring Part No.- 80151729 , O Ring Part No.- 80159549 , Seal Part No.- 80180269 , Needle Bearing Part No.- 80196379 , O-Ring Part No.- 80199429 , Locknut Rb Part No.- 80233399 , U-Cup Part No.- 80313509 , Seal Part No.- 80314109 , Taper Roller Bearing Part No.- 80323409 , Gear Part No.- 80380699 , O-Ring Part No.- 80409389 , Single Row Ball Bearing Part No.- 80414649 , Bonded Seal Part No.- 80416009 , Thread Connector R/B 04180301 Rb Part No.- 80431829 , O-Ring Part No.- 80521789 , Wiper Part No.- 80611919 , Wiper Part No.- 80612089 , Wiper Part No.- 80612109 , Plug Part No.- 80644809 , Wiper Part No.- 80647829 , Taper-Lock Part No.- 80655019 , U-Cup Part No.- 80659909 , Switching Bridge+10 Screws *See I* Part No.- 80676809 , One Way Restrictor Part No.- 80698189 , Plug Part No.- 80704779 , Flector Part No.- 80724859 , U-Seal Part No.- 80764589 , Diaphragm Rb Part No.- 80765059 , Wiper Part No.- 80782369 , O-Ring Part No.- 80801069 , O-Ring Part No.- 80878839 , Wiper Part No.- 81003989 , U-Cup Part No.- 81011999 , O-Ring Part No.- 81013509 , Oil Pump Part No.- 81019709 , Spring Pin Part No.- 81053489 , Quick Coupling Part No.- 81056259 , Quick Coupling Part No.- 81079239 , Pressure Gauge Part No.- 81100429 , Pressure Gauge Part No.- 81100559 , Lock Nut Part No.- 81125969 , Lock Nut Part No.- 81126029 , Connector Part No.- 81129469 , #Dapter Rb Part No.- 81130009 , O-Ring Part No.- 81249969 , Suttle Valve Part No.- 81255399 , Plug Part No.- 81260379 , Plug Part No.- 81260409 , Plug Part No.- 81260529 , Plug Part No.- 81260789 , Plug Part No.- 81260809 , Lock Nut Part No.- 81262269 , Equal Nipple Part No.- 81288279 , Lock Nut Part No.- 81294959 , Check Valve Part No.- 81315829 , Elbow Adapter Part No.- 81318729 , O-Ring Part No.- 81319869 , Gauge Part No.- 81332299 , Valve Part No.- 81342219 , Seal Part No.- 81356309 , Cap Part No.- 81358609 , Cap Part No.- 81358739 , O-Ring Part No.- 81371989 , O-Ring Part No.- 81401749 , Ring Part No.- 81479709 , Relay Spdt. 24V20a R/B 81481359 Part No.- 81481359 , O-Ring Part No.- 81487289 , Bearing Part No.- 81503519 , Body Push Button Part No.- 81547309 , O-Ring Part No.- 81555039 , Bushing Part No.- 81561289 , Plate Part No.- 81623999 , Plate Part No.- 81624189 , U-Seal Part No.- 81628409 , Oil Filter Part No.- 81649209 , Indicator Part No.- 81662869 , Swivel Nut Elbow Part No.- 81670749 , Swivel Nut Run Tee Part No.- 81671889 , Dipsplug Part No.- 81672509 , Female Connector Part No.- 81673109 , Aadapter Part No.- 81674659 , Steel Plug Part No.- 81674939 , Piston Seal Part No.- 81681939 , O-Ring Part No.- 81685979 , Quick Coupling Part No.- 81688599 , Plug Part No.- 81690959 , Union Unit Part No.- 81691309 , M/F Adapter Part No.- 81705709 , Plug Part No.- 81709749 , Thread Elbow Part No.- 81709879 , Union Tee Part No.- 81716189 , Swivel Nut Run Teepart No.- 81716339 , Union Part No.- 81716469 , Tube End Reducer Part No.- 81716599 , Tube End Reducer Part No.- 81716619 , Tube End Reducer Part No.- 81716749 , Swivel Nut Elbow Part No.- 81718359 , Seal Part No.- 81726929 , Seal Part No.- 81731759 , Connector Part No.- 81744279 , Connector Part No.- 81744309 , Tube End Reducer Part No.- 81764229 , Temp Gauge Part No.- 81765809 , Thread Connector Part No.- 81768269 , O-Ring Part No.- 81774129 , Seal Part No.- 81774259 , T-Connector Part No.- 81780409 , Valve Cartridge Part No.- 81780659 , Seal Part No.- 81794339 , U-Seal Part No.- 81794599 , Wiper Part No.- 81794619 , Union Nut Part No.- 81800109 , Pressure Gauge Part No.- 81816349 , Seal Part No.- 81820039 , Push Button Green - Was 64120432 (Dupl) Part No.- 81863639 , O-Ring Part No.- 81873539 , Ball Valve Part No.- 81908199 , O-Ring Part No.- 81917519 , Elbow Fitting Part No.- 81930919 , Many Poles Clip Case Part No.- 81947349 , Hub Fitting Part No.- 81947479 , Many Poles Clip Plug Part No.- 81947629 , Many Poles Clip Plug Part No.- 81947759 , O-Ring Part No.- 81953209 , Female Connector Part No.- 81955769 , Swivel Nut Elbow Part No.- 81956109 , Tube End Reducer Part No.- 81956239 , Spring Return Part No.- 81995089 , Seal Kit Part No.- 81995239 , Socket Part No.- 83674609 , Socket Part No.- 83674739 , Mounting Rail 1 Pc=2000 Mm Part No.- 85054659 , Terminal Part No.- 85054789 , End Press Part No.- 85054939 , Endplate ( Part No.- 85059579 , Spheric.Plain Bearin Part No.- 85069889 , Dipsplug Part No.- 85077899 , Diode Part No.- 85096839 , Spring Part No.- 85165169 , Tube End Reducer Part No.- 85197729 , Swivel Part No.- 85198329 , Push-Button Switch Part No.- 85203219 , Seal Kit Part No.- 85223559 , Seal Kit Part No.- 85236899 , Marking Plate Part No.- 85288569 , Pressure Gauge Part No.- 85325179 , Plug Part No.- 85328079 , Male Connectorrb Part No.- 85338389 , Union Part No.- 85339549 , Cooler Part No.- 85350239 , Solenoid - 24Vpart No.- 85354969 , O Ring Part No.- 85357589 , Tube End Reducer Part No.- 85378009 , O-Ring Part No.- 85387979 , Pulley V Belt Part No.- 85443529 , O-Ring Part No.- 85520689 , O-Ring Part No.- 85520709 , Blow Down Valve Part No.- 85524469 , Valve Part No.- 85529129 , Shrink Plastic Part No.- 85548459 , Pump Packing Part No.- 85559499 , Swivel Nut Elbow Part No.- 85591839 , Spher. Plain Bearing Part No.- 85592029 , Body Part No.- 85602529 , O-Ring Part No.- 85646299 , Terminal Part No.- 85647049 , Component Plug Part No.- 85647179 , Male Stud Fitting Part No.- 85647329 , Seal Kit - Bom In T-Text Part No.- 85670069 , Tube Stack Part No.- 85676689 , Plug Part No.- 85713729 , High Pres. Hose Assy: Part No.- 85727009 , Steel Plug Part No.- 85730219 , Push-Button Switch Yellow Part No.- 85761749 , O-Ring Part No.- 85835709 , Seal Part No.- 85843849 , Union Part No.- 85846339 , Plug Part No.- 85864379 , Non-Return Valve Part No.- 85896529 , Direct.Control Valve Part No.- 86425779 , Tee Part No.- 86527549 , M/F Adapter Part No.- 86540259 , Swivel Nut Elbow Part No.- 86548899 , Pressure Gauge Part No.- 86564659 , Plug Screw Part No.- 86568309 , Pressure Switch Part No.- 86639509 , Str.Thread Connector *Pho Part No.- 86676999 , Cable Part No.- 86710859 , Cable Part No.- 86710989 , Wiper Part No.- 86765969 , Seal Kit Part No.- 86767039 , Seal Kit Part No.- 86779089 , Lever Assy Part No.- 86783749 , Cable500v Part No.- 86793809 , Deep Groove Ball Bearing Part No.- 86798699 , Knob Part No.- 86801569 , Relief Valve Part No.- 86847939 , Gauge Fitting Part No.- 86873169 , Seal Kit Part No.- 86878089 , Guide Ring Part No.- 86893099 , Element, Engine Oil Filter Part No.- 86895139 , Lock Nut Part No.- 86912899 , Seal Kit Part No.- 86930549 , Pressure Seal Part No.- 86959869 , O-Ring Part No.- 86973329 , O-Ring Part No.- 86993539 , Pressure Switch Part No.- 87025489 , Pressure Switch Part No.- 87025509 , Cable Part No.- 87029399 , Cable Part No.- 87029419 , Torque Wrench Part No.- 87049219 , Socket 19Mm Part No.- 87049349 , Socket 22Mm Part No.- 87049479 , Socket 24Mm Part No.- 87049509 , Socket 30Mm Part No.- 87049629 , Socket 36Mm Part No.- 87049759 , Spanner Part No.- 87049889 , Wrench Part No.- 87049909 , Link 27Mm Part No.- 87050009 , Wrench 30Mm Part No.- 87050139 , Wrench 41Mm Part No.- 87050399 , Extension Bar Part No.- 87051019 , Wrench Head 19Mm Part No.- 87051309 , Non-Return Valve Part No.- 87051559 , Plug Part No.- 87169289 , Seal Kit Part No.- 87169439 , Thearrd Element Part No.- 87170919 , Socket 46Mm Part No.- 87244579 , Safety Valve Part No.- 87252329 , Oil Filling Grouppart No.- 87253059 , Cable Part No.- 87256519 , Piston Seal Part No.- 87263089 , Guide Ring Part No.- 87263109 , Guide Ring Part No.- 87263239 , Piston Rod Seal Part No.- 87263499 , O-Ring Part No.- 87284609 , Seal Kit Part No.- 87285619 , Lock Nut Part No.- 87454109 , Rubber Cover Part No.- 87482869 , Thread Element Part No.- 87902489 , Seal Kit Part No.- 87906679 , Pressure Limit Part No.- 87910519 , Solenoid Valve Cable. 24V Part No.- 87936809 , Union Part No.- 87939559 , Non-Return Valve Part No.- 88065959 , Socket Cover Part No.- 88073149 , Open End Socket Part No.- 88097679 , Shuttle Valve Cartr. Part No.- 88110579 , Pressure Reducing Valve Part No.- 88110609 , 3/2-Hydr.Cartr.Valve Part No.- 88110729 , Pressure Reducing Valve Part No.- 88110859 , Pressure Compensator Part No.- 88110989 , Plug Part No.- 88113909 , Plug Screw Part No.- 88114079 , Plug Part No.- 88114109 , Check Valve Part No.- 88122519 , Plug Part No.- 88124539 , Press.Relief Valve Part No.- 88126839 , Directional Valve Part No.- 88127159 , 3/2-Directional Valv Part No.- 88129179 , Handle Knob Part No.- 88177759 , Pilot Control Valve Part No.- 88178079 , Pilot Control Valve Part No.- 88178229 , Thread Element Part No.- 88189399 , Seal Bushing Part No.- 88189549 , Seal Part No.- 88204749 , Seal Part No.- 88205069 , Spring Part No.- 88208099 , O-Ring Part No.- 88219159 , End Plate Part No.- 88220079 , Spool Section Seal Kit 66512933 Part No.- 88220229 , Mechanical Ac.Module Part No.- 88220489 , Spring Type Straight Pin Part No.- 88232279 , Seal Kit Part No.- 88253239 , Seal Kit Part No.- 88253369 , Seal Kit Part No.- 88253499 , Coil Part No.- 88253519 , Lever Assy Part No.- 88259169 , Piston Centering Kit Part No.- 88261119 , Orifice+Nonret.Valve Part No.- 88261249 , Seal Kit Part No.- 88261379 , Repair Kit Part No.- 88263009 , Piston Seal Part No.- 88278779 , Rubber Billow Part No.- 88282339 , Knob Part No.- 88282469 , Check Valve Part No.- 88287409 , Seal Kit Part No.- 88288009 , Spool + Spring Part No.- 88288269 , Hydr. Activating Body Part No.- 88288399 , Knob Part No.- 88288419 , Holding Solenoid Part No.- 88288549 , Rubber Part No.- 88288679 , Pilot Valve Assy Part No.- 88288829 , Pilot Valve Assy Part No.- 88288959 , Valve Assy Part No.- 88289019 , Seal Kit Part No.- 88289309 , Valve Assy Part No.- 88289559 , Seal Kit Part No.- 88300029 , U-Seal Part No.- 88323399 , Guide Ring Part No.- 88323419 , Union Part No.- 88338519 , Inclination Gauge Part No.- 88365609 , Seal Kit Part No.- 88375889 , Boom Valve Assembly Part No.- 88400609 , Valve Section Part No.- 88400859 , Check Valve Part No.- 88426209 , Seal Part No.- 88434189 , Overcenter Valve Part No.- 88435629 , Pilot Control Valve Part No.- 88436769 , Seal Kit Part No.- 88480909 , Shaft Seal Part No.- 88481219 , Deep Groove Ball Bearing Part No.- 88487559 , Rain Cap Part No.- 88497179 , O-Ring Part No.- 88525329 , Cable Gland (Braided Snield) Part No.- 88556449 , Cable Gland (Braided Snield) Part No.- 88556609 , Cable Gland Part No.- 88556859 , Threaded Rod Part No.- 88560009 , Directional Valve Part No.- 88586709 , Terminal Marking Strip Card Part No.- 88592829 , Work Light Part No.- 88595609 , End Socket Part No.- 88636409 , Control Valve Part No.- 88638829 , Seal Kitpart No.- 88639019 , Solenoid Part No.- 88639149 , Cavity Plug Cartidge Part No.- 88683009 , Hydr.Hose Part No.- 88689749 , Hydr.Hose Part No.- 88691269 , Sleeve Part No.- 88691399 , Hydr.Hose Part No.- 88692709 , Sleeve Part No.- 88692839 , Cable Assembly24v Part No.- 88729129 , Plug Part No.- 88732889 , Direction Valve Mod. Part No.- 88736009 , Basic Module (See Texts) Part No.- 88736389 , Shock And Antic.Valv Part No.- 88736539 , Shock And Antic.Valvepart No.- 88736669 , Slydring Rod Part No.- 88741239 , U-Seal Part No.- 88741369 , Eye Piece Part No.- 88741499 , Seal Kit Part No.- 88748739 , Seal Kit Part No.- 88750009 , O-Ring Part No.- 88750669 , Valve Section Part No.- 88762609 , Button Part No.- 88766809 , Push Button Cover With Symbol Part No.- 88766929 , Push Button Cover With Symbol Part No.- 88767659 , Push Button Cover With Symbol Part No.- 88768009 , Sequence Valve Part No.- 88770339 , Over Center Valve Part No.- 88770619 , Push Button Cover Part No.- 88775389 , Pressure Rel.Valve Part No.- 88782259 , Over Center Valve Part No.- 88788059 , 3P Switch Head Part No.- 88789759 , Piston Rod Seal Part No.- 88794459 , Piston Rod Seal Part No.- 88794589 , Shaft Seal Part No.- 88794609 , Pressure Relief Valve Part No.- 88801109 , Conrol Block Part No.- 88801239 , Pressure Switch Part No.- 88801369 , Pressure Red./Relieving Valve Part No.- 88801499 , Check Valve Part No.- 88801519 , Bearingpart No.- 88809749 , Terminal Part No.- 88814169 , End Plate Part No.- 88814319 , Marking Plate 11-20 Part No.- 88814609 , Marking Plate 21-30 Part No.- 88814729 , Relay Part No.- 88815209 , Relay Base Part No.- 88815329 , Delay Time Relay Part No.- 88815459 , Relief Valve Fitting Part No.- 88817219 , Control Valve Part No.- 89538029 , Shaft Seal Kitpart No.- 89542409 , O-Ring Part No.- 89552979 , Repair Kit Part No.- 89555189 , Repair Kit Part No.- 89555599 , Spring Part No.- 89565369 , O-Ring Part No.- 89573939 , O-Ring Part No.- 89594469 , Non-Return Valve Part No.- 89597779 , O-Ring Part No.- 89624509 , Elbow Part No.- 89726819 , Service Indicator Part No.- 89727009 , Electrical Motor380v Part No.- 89730919 , Air Filter Element Part No.- 89732099 , Safety Cartridge Part No.- 89732119 , Screw, Hexagon Head, Full Thread Part No.- Af00100326 , Screw, Hexagon Head, Partial Threa Part No.- Af00100650 , Screw, Hexagon Head, Partial Threa Part No.- Af00100840 , Screw, Hexagon Head, Partial Threa Part No.- Af00101224 , Washer, Lock, Disc-Lock Part No.- Af03000031 , Washer, Lock, Disc-Lock Part No.- Af03000032 , Washer, Lock, Double Part No.- Af03000120 , Washer, Lock, Disc-Lock Part No.- Af03000121 , Washer, Lock, Disc-Lock Part No.- Af03000122 , Washer, Lock, Disc-Lock Part No.- Af03000124 , Male Stud Elbow Adapter Part No.- Af10150007 , Plastic Pipe Part No.- Bg00312133 , Service Kit Part No.- Bg00323348 , Service Kit Part No.- Bg00323740 , Service Kit Part No.- Bg00323744 , Service Kit Part No.- Bg00323808 , Service Kit Part No.- Bg00323812 , Oil Filter Part No.- Bg00323815 , Oil Separator Part No.- Bg00323824 , Valve Discharge Part No.- Bg00323879 , Overcenter Valve Part No.- Bg00326359 , Overcenter Valve Part No.- Bg00326360 , Button Part No.- Bg00382999 , Compressor Assembly Ctn10 Part No.- Bg00865150 , Clogging Indicator Part No.- Bt00013366 , Membrane Part No.- 30190 , Main Valve Bushing Part No.- 30217 , Valve Housing Part No.- 32069 , Seal Part No.- 40104 , Spool Part No.- 40112 , Seal Part No.- 40139 , Wedge Part No.- 40353 , Lock Plate Part No.- 40367 , Filling Plug Part No.- 40368 , Seal Part No.- 40388 , Seal Part No.- 40390 , Seal Part No.- 40391 , Accumulator Screw Part No.- 40392 , Rubberring Part No.- 40396 , Cover Part No.- 40418 , Spool Part No.- 40419 , Acc. Charging Device Part No.- 40633 , Locking Plate Part No.- 41081 , Shim Plate Part No.- 41793 , Shim Plate Part No.- 41794 , Shim Plate Part No.- 42364 , Spring Part No.- 42461 , O Ring Part No.- 90004 , O Ring Part No.- 90011 , O Ring Part No.- 90012 , O Ring Part No.- 90013 , O Ring Part No.- 90017 , O Ring Part No.- 90018 , O Ring Part No.- 90019 , O Ring Part No.- 90024 , O Ring Part No.- 90025 , Usit Ring Part No.- 90056 , Springpart No.- 90104 , Spring Ring Part No.- 90302 , Split Pin Part No.- 90321 , Parallel Pin Part No.- 90342 , Lock Ring Part No.- 90350 , Flange Plug Part No.- 90403 , Flange Plug Part No.- 90424 , Flange Plug Part No.- 90444 , Check Valve Part No.- 90532 , Lifting Eye Part No.- 90605 , Spherical Bearing Part No.- 90834 , Taper Plug Part No.- 93125 , Wiper Part No.- 94043 , Valve Bodypart No.- 100480 , Piston Part No.- 100507 , Accumulator Cover Part No.- 100510 , Brether(Incl Part 55.2) Part No.- 101200 , Seal Part No.- 102142 , Seal Part No.- 102146 , Shield Plate Part No.- 102559 , Wear Plate Part No.- 102621 , Wear Plate Part No.- 102729 , Tie Rod Nut Part No.- 104012 , Tie Rod Part No.- 104013 , Front Head Part No.- 110701 , Plug Part No.- 110710 , Spring Guide Part No.- 112510 , Plug Part No.- 112512 , Seal Part No.- 151217 , Lower Tool Bushing Part No.- 151264 , Seal Set (Kit) Part No.- 151490 , Shield Plug Part No.- 154015 , Cylinder Part No.- 156197 , Kit Lable Set Part No.- 157283 , Pad Part No.- 300768 , Upper Tool Bushing Part No.- 300773 , Check Valve Part No.- 300801 , Main Spool Part No.- 300803 , Accumulater Screw Part No.- 301020 , Reataining Pin Part No.- 400323 , Rubberplug Part No.- 400566 , Tool Retaining Pin Part No.- 400584 , Reataining Pin Part No.- 400588 , Spool Part No.- 400652 , Rubberplug Part No.- 400676 , Flange Part No.- 847660 , O Ring Part No.- 901026 , Split Pin Part No.- 901136 , O Ring Part No.- 902122 , Bushing Part No.- 902724 , O Ring Part No.- 910006 , O Ring Part No.- 910016 , O Ring Part No.- 910018 , Wiper Part No.- 911040 , Seal Part No.- 950149 , Seal Part No.- 950150 , Seal Set Part No.- 951078 , Rod Part No.- 951080 , Radiator Cap 12-16 Psi Part No.- 4521237 , Downstream Pressure Regulating Valve Part No.- 4691203 , Valve Spool+Plug Part No.- 4691836 , Flange Part No.- 4692157 , Shield, Dust Part No.- 4692412 , Bearing Cone Taper Roller Part No.- 4692677 , Cup, Hub Part No.- 4692678 , Cap Screw Part No.- 4692732 , Cap Screw Part No.- 4692734 , Shaft, Planet Part No.- 4692901 , Spacer Part No.- 4692902 , Roller Needle Part No.- 4692903 , Shim Part No.- 4692909 , Lock Nut Part No.- 4692916 , Gear Planet Part No.- 4692943 , Hub Gear Part No.- 4692944 , Gear Sun Part No.- 4692945 , Seal Oil Part No.- 4692952 , Spindle Part No.- 4692955 , Planet Carrier Assembly Part No.- 4692961 , Flange Part No.- 4692996 , Hub & Cup & Stud Assembly Part No.- 4692997 , Axle Shaft Short Part No.- 4692998 , Axle Shaft Long Part No.- 4692999 , Sleeve, Pinion Bearing Part No.- 4693001 , Seal Part No.- 4693002 , Flange Part No.- 4693003 , Disc Brake Part No.- 4693006 , Diff & Carrier Assy Part No.- 4693028 , Differential Carrier & Case Assembly Part No.- 4693031 , Spindle Lock Nut Part No.- 4693076 , Spindle Nut Lock Assembly Part No.- 4693077 , Cap Part No.- 4693406 , Plug Part No.- 4693470 , Flange Part No.- 4693480 , Dipstick Part No.- 4693598 , Spring, Accumulator Part No.- 4694051 , Electrical Indicator Assy Part No.- 4694119 , Seal And Conn. Nut Kit Part No.- 4694120 , Inhall Bearing Ring Part No.- 4694137 , Impeller Hub Screw Part No.- 4694138 , Turbine Hub Screw Backing Ring Part No.- 4694139 , Valve Assy Part No.- 4694175 , Ring, Snap Part No.- 4694185 , Magnet Part No.- 4694189 , Cover To Case Screw Lockwasher Part No.- 4694262 , Plug, Pipe Part No.- 4694307 , Solenoid Interconnect Wire Part No.- 4694319 , Washer, Lock Part No.- 4694366 , Bearing Cone Taper Roller Part No.- 4694397 , Diff. & Carrier Attaching Nut Part No.- 4694407 , O-Ring Part No.- 4694477 , Sealing Ring Kit Bompart No.- 4694612 , Bearing Cup * Part No.- 4695583 , Bearing Cone, Tapered Roller Part No.- 4695584 , Bearing Part No.- 4695695 , Retaining Plate Shim Part No.- 4695696 , Retaining Plate Shim Part No.- 4695697 , Retaining Plate Shim Part No.- 4695698 , Retaining Plate Shim Part No.- 4695699 , Rear Bearing Cone Part No.- 4695700 , Front Bearing Cup Part No.- 4695702 , Front Bearing Cone Part No.- 4695703 , Disc Hub Snap Ring Part No.- 4695705 , Clutch Support Part No.- 4695706 , Clutch & Hub Assy Part No.- 4695709 , Piston Ring Part No.- 4695710 , Piston Ring Part No.- 4695711 , Circlip Part No.- 4695712 , Circlip Part No.- 4695713 , Keyed Washer Part No.- 4695714 , Key Washer Part No.- 4695715 , Clutch Drum Hub Gear Part No.- 4695717 , Cap Part No.- 4696006 , Clutch Support Piston Ring Part No.- 4696017 , Snap Ring Part No.- 4696019 , Snap Ring Part No.- 4696020 , Keyed Washer Part No.- 4696021 , Keyed Washer Part No.- 4696022 , Keyed Washer Part No.- 4696023 , Outer Race Part No.- 4696097 , Regulator Spool Assembly Part No.- 4696150 , Regulator Spool Plug Part No.- 4696151 , Drive Plate Mounting Screw Part No.- 4696154 , Divine Plate Bearing Ring Part No.- 4696157 , Gear Retaining Plate Part No.- 4696229 , Gear Part No.- 4696230 , Idler Shaft Lube Plate Part No.- 4696231 , Gear Bearing Oil Baffle Part No.- 4696232 , Front Bearing Oil Baffle Part No.- 4696233 , Idler Shaft Part No.- 4696234 , Spring Speedo Drive Was Dup 69036419 Part No.- 4696235 , Cover 1St And 2Nd Clutch Part No.- 4696236 , Shaft Part No.- 4696237 , Transmission Case Assembly Part No.- 4696238 , Gear Part No.- 4696239 , Bearing Lock Pin Part No.- 4696241 , Gear Part No.- 4696242 , Idler Bearing Lube Tube Part No.- 4696244 , Pipe Clip Part No.- 4696246 , Spring Part No.- 4696258 , Pin Part No.- 4696259 , Keyed Washer Part No.- 4696261 , Rear Bearing Cup Part No.- 4696262 , Impeller Cover Part No.- 4696403 , Housing Rear Cover Part No.- 4696420 , Lock-Up Adapter Part No.- 4696421 , Speed Sensor Bushing Part No.- 4696422 , Cap Stud Part No.- 4696484 , O-Ring Part No.- 4696489 , Forward-Reverse Selector Valve Spo Part No.- 4696640 , Adjuster Bushng Plug N.I. Part No.- 4696737 , O-Ring Part No.- 4696795 , O-Ring -Vicon Part No.- 4696800 , Flange Nut Part No.- 4696851 , Spacer Part No.- 4696852 , Dipstick Tube Part No.- 4696858 , Spacer Part No.- 4696885 , Speed Sensor Housing Screw Part No.- 4696888 , Shaft, Sensor Drive Part No.- 4696889 , Gear-Sensor Part No.- 4696890 , Gear Roll Pin Was Dupl 69036418 Part No.- 4696891 , Self Locking Sensor Screw Part No.- 4696902 , Cup Part No.- 4697088 , Cone,Tapered Roller Bearing Part No.- 4697089 , Plug Part No.- 4697154 , Coil, 24V Part No.- 4697186 , O-Ring Part No.- 4697238 , Tube, Lube Part No.- 4697262 , Release Spring Part No.- 4697268 , Snap Ring Part No.- 4697270 , Drain Plug Part No.- 4697332 , Spool Part No.- 4697338 , Mounting Plate Part No.- 4697343 , Flange O-Ring Part No.- 4697359 , Seal Kit Part No.- 4697401 , Shaft Part No.- 4697405 , Spacer Part No.- 4697407 , Gear Part No.- 4697421 , Gear Part No.- 4697423 , Yoke Part No.- 4697492 , Flange Part No.- 4697495 , Ring Snap Part No.- 4697541 , Flange Part No.- 4697593 , Flange, Output Part No.- 4697595 , Flange Part No.- 4697616 , Cone* Part No.- 4697632 , Cup * Part No.- 4697633 , Bearing Cone Part No.- 4697634 , Capscrew Part No.- 4697636 , Pinion Oil Seal Part No.- 4697713 , Circlip Part No.- 4697806 , Turbine Shaft Gear Part No.- 4697948 , Output Shaft Gear Part No.- 4697949 , Input Shaft Part No.- 4697951 , Gasket Part No.- 4697987 , Spring Part No.- 4698007 , Plug Part No.- 4698008 , Seal Part No.- 4698011 , Stud Part No.- 4698051 , Fwd. Rev. Piston Guide Part No.- 4698076 , O-Ring Part No.- 4698077 , Forward Reverse Piston Part No.- 4698078 , Cap Stop Part No.- 4698079 , Fwd-Reverse Valve Spool Spacer Part No.- 4698080 , Spring Part No.- 4698081 , O-Ring Part No.- 4698145 , Ball Part No.- 4698497 , Circlip Part No.- 4698528 , R/B 04698572 Lockwasher Part No.- 4698572 , Solenoid 24V Part No.- 4698577 , O-Ring, Solenoid Valve Part No.- 4698578 , O-Ring, Solenoid Valve Part No.- 4698579 , Plug Part No.- 4698592 , O-Ring Part No.- 4698872 , Filter Assy Part No.- 4698883 , Seal, Output Shaft Oil Part No.- 4698940 , Pin, Roll Part No.- 4699018 , Pin, Roll Part No.- 4699019 , Spacer Part No.- 4699044 , Ball,Steel Part No.- 4699078 , Cap, Pipe Part No.- 4699080 , Seat, Valve Part No.- 4699090 , Spacer Part No.- 4699092 , Baffle Part No.- 4699101 , Cover, Clutch Part No.- 4699151 , Sensor Screw Washer Part No.- 4699185 , Expander When Nla Use 04699198 Part No.- 4699199 , Tube Part No.- 4699243 , Plug, Pipe Was Dupl 04694308 Part No.- 4699244 , Plug, Pipe Part No.- 4699246 , Cap, Bearing Part No.- 4699247 , Tube Part No.- 4699248 , Cover Screw Part No.- 4699252 , Hub, Impeller Part No.- 4699258 , Ring Was Dupl 04691219 Part No.- 4699273 , Clip, Tube Part No.- 4699277 , Rivet Part No.- 4699278 , Plug,Bolt,Hex-Head Part No.- 4699283 , Plug,Bolt,Hex-Head Part No.- 4699285 , Plug,Bolt,Hex-Head Part No.- 4699286 , Plug,Bolt,Hex-Head Part No.- 4699287 , Washer, Sealing Part No.- 4699288 , Union, Adapter Part No.- 4699290 , Plug, Pipe Part No.- 4699292 , Pin Part No.- 4699295 , Stop, Valve Part No.- 4699296 , Spacer Part No.- 4699300 , Plate, Cover Part No.- 4699301 , Housing Assy, Dipstick Part No.- 4699307 , Ring Snap Part No.- 4699341 , Seal Oil Part No.- 4699367 , O-Ring Part No.- 4699393 , Ring Part No.- 4699409 , Ring Part No.- 4699410 , Bearing Cup Part No.- 4699419 , Bearing Cone Part No.- 4699420 , Plug Part No.- 4699452 , Tube Part No.- 4699468 , Tube Part No.- 4699469 , Stud Part No.- 4699490 , Pipe, Oil Filler Part No.- 4699492 , Ball Part No.- 4699497 , Speed Sensor Gear Screw Rb Part No.- 4699532 , Plug Part No.- 4699572 , Plug Part No.- 4699573 , Plug, Pipe Part No.- 4699582 , Sleeve Part No.- 4699587 , Input Flange, Companion Part No.- 4699649 , Plug, Pipe Part No.- 4699678 , Stud, Wheel Part No.- 4699695 , O Ring Part No.- 4699700 , Ring Piston Part No.- 4699717 , Spring, Expander Part No.- 4699718 , Sleeverb Part No.- 4699720 , Hub Face Seal Part No.- 4699733 , O-Ring Part No.- 4699807 , O-Ring Part No.- 4699817 , Rivet Part No.- 4699857 , Tube Part No.- 4699859 , Cover, Control Part No.- 4699861 , Ring Piston Part No.- 4699863 , Ring Outer Piston Part No.- 4699867 , Disc Inner Lock-Up Part No.- 4699869 , Snap Ring, Backing Plate Part No.- 4699870 , Lock Plate, Snap Ring Part No.- 4699871 , Screw, Lock Plate Part No.- 4699872 , Backing Plate, Lock-Up Part No.- 4699875 , Outer Disc Lock-Up Part No.- 4699876 , Piston, Lock-Up Part No.- 4699877 , O-Ring Inner Piston Part No.- 4699878 , Nut Part No.- 4699902 , Breather Part No.- 4700190 , Seal Oil Part No.- 4700221 , Bearing Taper Roller Assy Part No.- 4700235 , Shield, Dust Part No.- 4700240 , Spacer Part No.- 4700241 , Bearing Cylinder Roller Part No.- 4700243 , Ring, Sealing Part No.- 4700270 , Plug Part No.- 4700274 , Plug Part No.- 4700342 , Spool, Valve Was Dupl 04697666 Part No.- 4700370 , Spring, Neutral Valve Part No.- 4700371 , Spool, Regulator Valve Part No.- 4700373 , Spring Part No.- 4700374 , Spool Spring, Outer Part No.- 4700375 , Spring, Safety Valve Part No.- 4700376 , Speed Valve Second Part No.- 4700380 , Valve Part No.- 4700381 , Spring, Selector Valve Part No.- 4700383 , Piston, Shut-Off Valve Part No.- 4700387 , Guide, Valve Piston Part No.- 4700390 , O-Ring Part No.- 4700391 , Ring, Snap Part No.- 4700392 , Piston Part No.- 4700393 , Ring, Piston Part No.- 4700394 , Ring, Piston Part No.- 4700395 , Plug, Pipe Part No.- 4700400 , Housing, Shifter Part No.- 4700405 , Ring, Snap Part No.- 4700406 , Ring, Snap Part No.- 4700413 , Pin Part No.- 4700417 , Disc, Outer Part No.- 4700418 , Disc, Inner Part No.- 4700419 , Plate, End Part No.- 4700420 , Clutch Disc Part No.- 4700426 , Plate, End Part No.- 4700427 , Disc,Clutch Part No.- 4700428 , Ring, Snap Part No.- 4700429 , Spring Part No.- 4700451 , Spring Part No.- 4700452 , Piston Part No.- 4700453 , Valve Stop Part No.- 4700454 , Valve, Check Part No.- 4700459 , Seal, Oil Part No.- 4700462 , Shim Part No.- 4700464 , Shim Part No.- 4700465 , Shim Part No.- 4700466 , Gasket, Cork Part No.- 4700471 , Plug,Bolt,Hex-Head Part No.- 4700473 , Pin Part No.- 4700476 , Bearing Cylindrical Roller Part No.- 4700477 , Oil Sump Assembly Part No.- 4700481 , Cup Part No.- 4700482 , Bearing Tapered Roller Radial Part No.- 4700483 , Shaft, Output Part No.- 4700484 , Gasket Part No.- 4700487 , Gasket Part No.- 4700497 , Bearing, Tapered Roller Part No.- 4700502 , Cap, Bearing Part No.- 4700505 , Seal, Oil Part No.- 4700506 , Shaft, Gear Part No.- 4700521 , Gasket Part No.- 4700522 , Capscrew Part No.- 4700523 , Spacer Part No.- 4700528 , Bearing, Radial Ball, 110Mm Part No.- 4700530 , Gasket, Bearing Cap Part No.- 4700531 , Tube Part No.- 4700533 , Tube Part No.- 4700534 , Tube Part No.- 4700535 , Tube Part No.- 4700536 , Tube Part No.- 4700540 , Tube Part No.- 4700541 , Reaction Member Part No.- 4700547 , Pin Part No.- 4700548 , Ring, Snap Part No.- 4700549 , Spring, Pressure Part No.- 4700552 , Piston Part No.- 4700553 , Spring, Regulator Part No.- 4700554 , Gasket Part No.- 4700555 , Tube Part No.- 4700556 , Tube Part No.- 4700557 , Tube Part No.- 4700558 , Ring, Snap Part No.- 4700561 , O-Ring Part No.- 4700562 , Pin, Dowel Part No.- 4700570 , Ring, Snap Part No.- 4700573 , Snapringrb Part No.- 4700574 , Screw, Impeller To Cover Part No.- 4700583 , Spacer Part No.- 4700585 , Sleeve, Oil Distributor Part No.- 4700588 , Shim(.004) Part No.- 4700590 , Shim(.007) Part No.- 4700591 , Shim(.010) Part No.- 4700592 , Pin, Dowel Part No.- 4700596 , Bearing, Radial/Single Row/Roller Part No.- 4700598 , Ring, Snap Part No.- 4700602 , O-Ring Part No.- 4700607 , Cap Part No.- 4700608 , Bearing Cup, Tapered Roller Part No.- 4700610 , Ring Piston Part No.- 4700611 , Shim(.004) Part No.- 4700613 , Shim(.007) Part No.- 4700615 , Shim(.010) Part No.- 4700616 , Plug Part No.- 4700708 , Pin, Valve Control Part No.- 4700719 , Race, Outer Part No.- 4700732 , Retainer Part No.- 4700733 , Bearing Cone Part No.- 4700735 , Spacer Pinion Roll Part No.- 4700849 , Stud, Wheel Part No.- 4700855 , Idler Shaft Nut Part No.- 4700922 , Pin, Roll Part No.- 4700991 , Speed Sensor Housing Cover Part No.- 4700993 , Rubber Grommet, Bottom - For 69041324 Part No.- 4790080 , Gromet Rubber Part No.- 4790082 , Rubber Seals (For 64582637) Part No.- 4790137 , Throttle Pedal Part No.- 4790774 , Treadle Pin Kit - Was 69036543 (Dupl) Part No.- 4790824 , Roller Kit - Was 69036541 (Dupl) Part No.- 4790825 , Special Tool Set (See Kit List) Part No.- 15225768 , Flushing Divice Assembly Part No.- 15274948 , Stand Part No.- 15483038 , Guide Strip 5143Mm Part No.- 20891748 , Strip (L=5753) Part No.- 20891878 , Centralizerpart No.- 26368598 , Taper Pin Assy Part No.- 26438771 , Slide Frame Part No.- 30299518 , Cover Part No.- 32163528 , Cylinder Tube Part No.- 32359578 , Front Centralizerpart No.- 32532298 , Guide Piece Part No.- 33191234 , Rod Part No.- 33275108 , Beam Assembly Tf500-12 Part No.- 34449502 , Orifice Part No.- 34501258 , Limit Bushing Part No.- 34568718 , Split Pin Part No.- 47148300 , Connecting Box Part No.- 55000283 , Reel Assy Part No.- 55001104 , Spcial Tools Part No.- 55006507 , Rotation Motor Part No.- 55009785 , Connecting Parts Hlxd Part No.- 55010618 , Lockingpart No.- 55014921 , Mounting Plate Part No.- 55016752 , Mounting Plate Part No.- 55016856 , Wear Piece, 1 1/2 Part No.- 55021572 , Slipper Pad Part No.- 55024687 , Wear Piece, 1 1/4 Part No.- 55024689 , Gear Box Part No.- 55046628 , Valve Body Kit Part No.- 55066744 , Seal Housing Guide Ring Part No.- 55069568 , Inlet Valve Part No.- 55155202 , Cyclone Part No.- 55155212 , Belt Drive Kit Part No.- 55155431 , Check Valve Rb Part No.- 55215605 , Cable Assembly Part No.- 55226686 , Impeller Part No.- 56001744 , Turbine Part No.- 56001745 , Set Part No.- 56001807 , Rubber Seal Lock (Was Dupl 69039541) - For 69041325 Part No.- 56008025 , Rubber Seal (Was Dupl 69039540) - For 69041325 Part No.- 56008027 , Flex-Plate Kit Part No.- 56008908 , Starter Motor Part No.- 56012786 , Seal Part No.- 56012793 , Seal Part No.- 56012799 , Seal Part No.- 56012812 , Seal Ring Part No.- 56012815 , Bladder Part No.- 56012833 , Cover Part No.- 56012851 , Directional Valve 77011742 Part No.- 56014161 , Cover Part No.- 56018318 , Nozzle (See T-Text) Part No.- 56022222 , Turbochargerrb Part No.- 56022223 , Housing Converter Part No.- 56028097 , Flex Plate Mtg Grp Part No.- 56028106 , Pump Drive Group Part No.- 56028108 , Housing Lockup & Modulator Valve Part No.- 56031267 , Kit, Drive Plate Part No.- 56031509 , Rubber Curve Part No.- 56033027 , Steering Wheel Part No.- 56039602 , Center Part No.- 56039604 , F/A Adapter 90 Deg Part No.- 64100025 , Connector Part No.- 64100028 , F/A Adapter - 90 Deg. Part No.- 64100062 , F/A Adapter Tee Part No.- 64100117 , F/A Adapter 90 Deg Part No.- 64100219 , F/A Adapter Part No.- 64100245 , F/A Adapter Part No.- 64100251 , F/A Adapter 90 Deg Part No.- 64100328 , F/A Adapter Part No.- 64100379 , F/A Adapter 90 Deg Part No.- 64100389 , F/A Adpter Str Part No.- 64100391 , F/A Adapter Part No.- 64100392 , F/A Adapter 90 Deg Part No.- 64100438 , Decal, Nameplate Part No.- 64100618 , Neutral Switch Transmission (64100649) Part No.- 64100644 , F/A Adapter - 90 Deg. Part No.- 64100681 , F/A Adapter Part No.- 64100696 , F/A Adapter Str Part No.- 64100697 , F/A Adpter Str Part No.- 64100839 , O-Ring Part No.- 64100853 , Exhaust Clamp ( U Clamp) Part No.- 64101298 , F/A Adapter Str Part No.- 64101314 , F/A Adapter - 45 Deg. Part No.- 64101341 , F/A Adapter Str Part No.- 64101516 , Bearing, Radial Ball 105Mm Part No.- 64101548 , F/A Adapter 90 Deg Part No.- 64101557 , Element, Filter Part No.- 64101672 , O Ring Part No.- 64101710 , Valve, Safety Part No.- 64101758 , F/A Adapter Part No.- 64101837 , F/A Adapter Str Part No.- 64101852 , F/A Adapter Str Part No.- 64101853 , O Ring Part No.- 64101879 , Stariner Basket Part No.- 64102135 , F/A Adapter 90 Deg Part No.- 64102247 , F/A Adapter Tee Part No.- 64102260 , F/A Adapter - 90 Deg. Part No.- 64102261 , F/A Adapter - Reducer Part No.- 64102266 , F/A Adapter Part No.- 64102270 , F/A Adapter - 90 Deg. Part No.- 64102272 , F/A Adapter 90 Deg Part No.- 64102274 , F/A Adapter - Tee Part No.- 64102295 , F/A Adapter - Reducer Part No.- 64102452 , Driveshaft, Ä8c Part No.- 64102831 , Splined Yoke Part No.- 64102837 , Driveshaft Part No.- 64102843 , Hyd Pump Part No.- 64102872 , F/A Pipe Plug Adapter Part No.- 64102890 , O-Ring Part No.- 64103000 , F/A Adapter 90 Deg Part No.- 64103083 , F/A Adapter - Plug Part No.- 64103125 , F/A Adapter - Reducer Part No.- 64103140 , Breaker, Circuit, 15 Amp Part No.- 64103252 , F/A Adapter - Tee Part No.- 64103379 , F/A Adapter - 90 Deg Part No.- 64103511 , F/A Adapter Part No.- 64103613 , O-Ring, 0.187 Part No.- 64103917 , O-Ring Part No.- 64103967 , F/A Pipe Plug Adapter Part No.- 64105513 , F/A Adapter-Tee Part No.- 64105635 , Split Flange Half Part No.- 64105790 , Flow Control Valve Part No.- 64106018 , F/A Adapter Test Port Part No.- 64106122 , Gauge Level Liquid Part No.- 64106197 , Breaker, Circuit Part No.- 64106224 , F/A Pipe Plug Adapter Part No.- 64106501 , F/A Pipe Plug Adapter Part No.- 64106502 , F/A Adapter - Plug Part No.- 64106506 , Fibromount Part No.- 64106586 , Clamp, Seal, Exhaust, 5 Part No.- 64106592 , F/A Pipe Plug Adapter Part No.- 64106718 , Clamp, Seal, Exhaust 4 Part No.- 64106926 , F/A Adapter - Reducer Part No.- 64107198 , H/C Hose Support Clamp Part No.- 64107373 , Handl- Cema 4 Enclosure Part No.- 64107763 , F/A Adapter - Plug Part No.- 64107813 , F/A Adapter 90 Deg Part No.- 64107918 , F/A Adapter 90 Deg Part No.- 64107974 , F/A Adapter 45 Deg Part No.- 64108050 , F/A Adapter - 90 Deg. Part No.- 64108068 , Elbow, Rubber Part No.- 64108429 , F/A Flange Half Part No.- 64108446 , Door Handle Mech Part No.- 64108483 , Cap Nut Part No.- 64108562 , F/A Adapter - Str Part No.- 64108706 , F/A Adapter - Str Part No.- 64108903 , Elbow Part No.- 64108937 , F/A Adapter Tee Part No.- 64109370 , T-Bolt, 1 3/8 - 1 9/16 Part No.- 64109506 , Alternator (24V) Part No.- 64109547 , F/A Adapter - Plug Part No.- 64109793 , Driveline Part No.- 64109948 , Dumpéhoist Pump Part No.- 64110163 , F/A Adapter - Plug Part No.- 64110516 , Mini Check Adapter Part No.- 64110549 , Axle Vent Part No.- 64110580 , Shaft Part No.- 64110608 , Band, Mounting Part No.- 64110852 , Switch W/Breaker 20 A Part No.- 64110863 , F/A Adapter - Str Part No.- 64111086 , Screw Type U Drive Part No.- 64112230 , F/A Adapter Part No.- 64112246 , F/A Adapter Part No.- 64112457 , F/A Adapter Part No.- 64112552 , O-Ring, Buna-A Part No.- 64112579 , F/A Adapter Tee Part No.- 64112586 , O-Ring, Buna-N Part No.- 64112654 , Heater Overload Part No.- 64113083 , F/A Split Flange Part No.- 64113099 , Valve, 3-Way Part No.- 64113625 , Spider Cross Part No.- 64114126 , Split Flange Half Part No.- 64114593 , F/A Adapter Part No.- 64114647 , F/A Adapter Split Half Part No.- 64115025 , Roller Chain Part No.- 64115593 , Single Sprocket Part No.- 64115594 , Chain Coupler Link Part No.- 64116112 , Pressure Sender Part No.- 64116603 , Element, Filter Part No.- 64116820 , Clamp, T-Bar Inlet Part No.- 64117546 , Bearing Cyl., Roller* Part No.- 64117581 , Control Cover Assembly Part No.- 64117663 , Pump, Charge/Scavenge Part No.- 64117679 , Motor, Sheave Part No.- 64117958 , Hyd Throttle Control Part No.- 64118023 , Valve, Treadle, Hydraulic Part No.- 64118024 , Steer Pump Part No.- 64118134 , Valve, Shuttle, 3/8 Part No.- 64118244 , Relay, 24V, Dpdt Part No.- 64118480 , Bearing,Ball Part No.- 64118570 , Relay Td Adj Part No.- 64118791 , Trim Seal Part No.- 64118794 , Pressure Differential Switch Part No.- 64118979 , Omniwrap 1 1/4 Part No.- 64119015 , Valve, Accumulator Discharge45 Part No.- 64119023 , Valve Needle Part No.- 64119309 , Press. Sw. 60 Psi Decreasing Part No.- 64119327 , Valve, Relief Part No.- 64119451 , Switch Pressure Part No.- 64119624 , Valve Steer Part No.- 64119640 , Valve Bucket Hoist Part No.- 64119641 , Connector Part No.- 64119670 , Connector, #16 Socket Contact Part No.- 64119868 , Connector, #16 Pin Contact Part No.- 64119869 , Pump Steer Part No.- 64119910 , Sender, Temperature, 1/2 Part No.- 64119924 , Sender, Oil Temperature,1/8 Part No.- 64119926 , Voltmeter, 24 Volt Part No.- 64119931 , Switch Master 4P Part No.- 64120067 , 24 V Worklight Halogen Part No.- 64120070 , Valve Part No.- 64120092 , Valve Part No.- 64120093 , Ac Current Monitor Part No.- 64120122 , Solenoid Valve 2W-Nc Part No.- 64120123 , Releif Valve 100-300 Psi Part No.- 64120124 , Polyswitch - 5A Part No.- 64120137 , Diode Assembly Zener Part No.- 64120138 , Circuit Breaker 5 A Part No.- 64120151 , Circuit Breaker 15 A Part No.- 64120152 , Seal Pushbutton - Boot Part No.- 64120159 , Sender - Oil Press 28B Part No.- 64120167 , Speed Switch Part No.- 64120171 , Circuit Breaker 10A Part No.- 64120172 , Circuit Breaker - 20A Part No.- 64120173 , Eng. Oil Press. Gauge - 24V Part No.- 64120193 , Water Temp. Gauge - 24V Part No.- 64120194 , Drive Oil Pressure Gauge 24V Part No.- 64120233 , Emergency Brake Switch Part No.- 64120257 , Connector - 6P Part No.- 64120308 , Connector Cap Part No.- 64120309 , Ring Part No.- 64120475 , 5.75 Headlight, W4v-W/Con Part No.- 64120510 , Decal, Converter Lockup Part No.- 64120542 , Square Indicator Light Red Part No.- 64120583 , Square Indicator Light Green Part No.- 64120584 , Square Indicator Light Yellow Part No.- 64120588 , Terminal Block With Diodes Part No.- 64120701 , Relay Part No.- 64120898 , Sender Oil Temp., 1/4 Part No.- 64120926 , Regulator Ballast 24 Volt - Was 69040200 (Dupl) Part No.- 64120977 , Circuit Breaker, 70A, 24V Part No.- 64120993 , Roller Lever Part No.- 64120999 , Door Limit Switch Part No.- 64122800 , Cable Gland Assy Part No.- 64122816 , Press. Sw.7 Psi Dual Circuit Part No.- 64122824 , Oil Pressure Switch12psi Part No.- 64122825 , Cable, Single Conductor No. 2 Part No.- 64122827 , Oil Temp., Switch, 200F N.O. Rising Part No.- 64122834 , Water Hose, 1 I.D Part No.- 64122919 , Pump Hydrostatic Part No.- 64123056 , Motor, Hydrostatic Part No.- 64123057 , Valve,Check Part No.- 64125030 , Pump - Bucketpart No.- 64125070 , Valve - Accumulator Charge Part No.- 64126003 , Orifice Part No.- 64129060 , Limit Switch Part No.- 64129067 , Relief Valve Part No.- 64131001 , Swivel Ors Tee Part No.- 64131125 , Swivel Ors Tee Part No.- 64131127 , Tube Clamp (-08) Part No.- 64131181 , Pump Dump Part No.- 64131194 , Throttle System Part No.- 64132177 , Needle Valve Part No.- 64132192 , Relay Spst 24V 8A Part No.- 64132343 , Front Box Decal Part No.- 64132364 , Decal Part No.- 64132366 , Engine Display Module Part No.- 64132411 , Pres Sw.4 Psi Dual-Prod Choice Ttext Part No.- 64132425 , Terminal Block With Diode Part No.- 64132496 , Transducer, Pressure 0 - 25 Bar Part No.- 64132607 , Headlamp Assy Part No.- 64132617 , Resistor 150 Ohms Part No.- 64132634 , Contact #16 Pin, Gold Plated Part No.- 64132653 , Relay Dpdt 24V, 5A Part No.- 64132763 , Instrument Panel Wiring, External Part No.- 64132793 , Instrument Panel Wiring, Internal Part No.- 64132794 , Circuit Breaker 105A, Manual Reset Part No.- 64132821 , Rubber Reducing Elbow 7-5 Part No.- 64133037 , Pilot Valve Part No.- 64135110 , Valve, Pilot Operator, Stackable Part No.- 64135111 , Hydraulic Cylinder Part No.- 64135124 , Commercial Steer Valve Part No.- 64136025 , Pilot Valve Part No.- 64136030 , Valve-Directional Cont. Bucket/Boom Part No.- 64136036 , Accumulator, 1 Qt (Uncharged) Part No.- 64136043 , Accumulator Charge Valve W/Relief Part No.- 64136045 , Pressure Reducing Valve Part No.- 64136047 , Switch Hydraulic Pressure Part No.- 64136048 , Inspection Cover Part No.- 64200275 , Valve Cap Part No.- 64201663 , Spacer Part No.- 64203883 , Pin Part No.- 64207225 , Bottom Carrier Assembly Part No.- 64208972 , Cinch Washer Part No.- 64211302 , Thrust Washer Part No.- 64217799 , Thrust Washer Part No.- 64217800 , Thrust Washer Part No.- 64217801 , Thrust Washer Part No.- 64217802 , Pin Part No.- 64222403 , Pin Part No.- 64222414 , Thrust Washer Part No.- 64223198 , Thrust Washer Part No.- 64223199 , Thrust Washer Part No.- 64223200 , Assembly Tank Cap Part No.- 64229334 , Pin Part No.- 64232865 , Sleeve Part No.- 64247065 , Sleeve Part No.- 64249192 , Sleeve Part No.- 64249193 , Sleeve Part No.- 64249202 , Sleeve Part No.- 64249208 , Bushing Part No.- 64249210 , Sleeve Part No.- 64249211 , Sleeve Part No.- 64249212 , Sleeve Part No.- 64249213 , Bearing Cartridge Part No.- 64253069 , Bearing Cartridge Part No.- 64253070 , Rework, O-Ring Plug Part No.- 64253140 , Seal Kit Part No.- 64253186 , Cyl., Steer, Dup. Seal, Ejc130 Part No.- 64253271 , Cyl., Dump, Dup. Seal, Ejc 130 Part No.- 64253276 , Seal Kit Part No.- 64253277 , Cyl., Lift, Dup. Seal, Ejc 130 Part No.- 64253278 , Cyl., Steer, Dup. Seal, Ejc430 Part No.- 64253282 , Seal Kit Part No.- 64253283 , Cyl., Eject, Dup. Seal, Ejc130 Part No.- 64253302 , Lever,Dump (Sleeved) Machining Part No.- 64254699 , Key Part No.- 64255203 , Pin Part No.- 64255473 , Seal Kit Part No.- 64255847 , Seal Kit Part No.- 64255848 , Seal Kit Part No.- 64255850 , Cover Plate Part No.- 64256548 , Sleeve Upper Articulation Part No.- 64257312 , Pin Upper Articulation Part No.- 64257336 , Bushing Part No.- 64257368 , Sleeve Part No.- 64257369 , Sleeve Part No.- 64257373 , Sleeve Part No.- 64257374 , Lock Collar Part No.- 64257375 , Pin Lower Articulation Part No.- 64257383 , Assy Dump Link Part No.- 64257393 , Bushing Part No.- 64257394 , Pin Part No.- 64257395 , Pin Hot Rolled Part No.- 64257396 , Pin Part No.- 64257397 , Hyd Cylinder Assy Steer Part No.- 64257408 , Piston Rod Part No.- 64257410 , Hyd Cylinder Assy 61 Lift Part No.- 64257411 , Piston Rod Part No.- 64257413 , Hyd Cylinder Assy Dump Part No.- 64257414 , Piston Rod Part No.- 64257416 , Bearing Cartridge Part No.- 64257424 , Pin Steer Part No.- 64257440 , Pin Dump Part No.- 64257444 , Pin Dump Part No.- 64257445 , Pin Lift Part No.- 64257446 , Pin Lift Part No.- 64257447 , Plate - Retaining Part No.- 64257466 , Sleeve Part No.- 64257544 , Bushing Part No.- 64257545 , Bushing Part No.- 64257546 , Bushing Part No.- 64257547 , Bushing Part No.- 64257548 , Bushing Part No.- 64257549 , Bushing Part No.- 64257550 , Bushing Part No.- 64257551 , Bushing Part No.- 64261832 , Collar Lock Part No.- 64263012 , Lincoln Lube Pump Kit Part No.- 64267600 , Accumulator, 1 Gallon Part No.- 64267671 , Junction Box Rework Part No.- 64268369 , Central Box Rework Part No.- 64268375 , Junction Box Rework Part No.- 64268377 , Shifter And Harness Part No.- 64268605 , Sleeve Part No.- 64269073 , Bushing Part No.- 64269074 , Bushing Part No.- 64269075 , Bushing Part No.- 64269347 , Spacer Part No.- 64269437 , Insulator Part No.- 64269440 , Chain Roller Part No.- 64269447 , Tube Assembly Part No.- 64269625 , Conversion Kit Part No.- 64269634 , Sprocket Rework Part No.- 64269655 , Spacer Part No.- 64269664 , Roller Bracket Weldt Part No.- 64269687 , Nylon Roller Part No.- 64269689 , Pin Part No.- 64269705 , Shaft Weldt Roller Guide Part No.- 64269718 , Roller Part No.- 64269720 , Valve Handle Steer Part No.- 64269754 , Pin Part No.- 64269823 , Pin Part No.- 64269824 , Sprocket Rework Part No.- 64278275 , Rework, O-Ring Plug Part No.- 64278402 , Tube Assembly Part No.- 64280143 , Tube Assembly Part No.- 64280144 , Lift Arm Machining Part No.- 64280156 , Link Assembly Part No.- 64280212 , Sleeve - Was 64552158 (Dupl) Part No.- 64280971 , Inspection Cover Part No.- 64281043 , Seat, Mech. Suspension - Isri 6000 Part No.- 64282231 , Sub Plate And Bolt Kit Part No.- 64285005 , Rexroth Charge Valve Part No.- 64285006 , Manifold Lubrication Part No.- 64285011 , Circuit Breaker 175A, Manual Reset Part No.- 64285717 , Rear Box Harness Part No.- 64285900 , Central Box Harness Part No.- 64285901 , Central Box Receptacle Part No.- 64285902 , Front Box Receptacle Part No.- 64286288 , Bearing Cup Part No.- 64400268 , Ball Joint Part No.- 64400466 , Rad Hose 3/4 Part No.- 64400522 , Key Part No.- 64400771 , Key Part No.- 64400790 , Ring Snap Part No.- 64400826 , Ring Snap Part No.- 64400873 , Ring Snap Part No.- 64400881 , Ring Snap Part No.- 64400882 , Ring, Retaining Part No.- 64400886 , Ring, Snap Part No.- 64400888 , Pin, Cotter Part No.- 64400900 , Clamp, Hose Part No.- 64401073 , O-Ring Part No.- 64401585 , O-Ring Part No.- 64401607 , O-Ring Vicon Part No.- 64401615 , Set Screw Part No.- 64402144 , Set Screw Cone Point Part No.- 64402145 , Valve Part No.- 64402734 , Breaker Circuit 20 Amps Part No.- 64403019 , Switch Light Part No.- 64403040 , Terminal Part No.- 64403076 , Hhcs 5/16 X 1 1/2 Part No.- 64403599 , Hhcs 7/16 X 1 1/4F8 Part No.- 64403611 , Hhcs 1/4 X 1/2 C8 Part No.- 64403725 , Hhcs 1/4 X 2 3/4 C8 Part No.- 64403737 , Hhcs 5/16 X 3/4C8 Part No.- 64403744 , Hhcs 3/8 X 3/4 C8 Part No.- 64403767 , Hhcs 3/8 X 1Unc C8 Part No.- 64403769 , Capscrew*See T-Text* Part No.- 64403770 , Hhcs 3/8 X 1 3/8 C8 Part No.- 64403771 , Hhcs 3/8 X 1 1/2 C8 Part No.- 64403772 , Hhcs 3/8 X 2 Part No.- 64403775 , Hhcs 3/8 X 3 1/2 C8 Part No.- 64403782 , Hhcs 1/2 X 1 1/2 Part No.- 64403819 , Hhcs 1/2 X 2 1/4 Part No.- 64403823 , Hhcs 3/4*4 1/2 C8 Part No.- 64403886 , Hhcs 1 X 2 C8 Part No.- 64403914 , Hhcs 8Mm X 25Mm 10.9 Zp Part No.- 64403979 , Hhcs 8Mm X 35Mmc8 Part No.- 64403981 , Hhcs 8Mm X 40Mmc8 Part No.- 64403982 , Hhcs 10Mm X 80Mm Part No.- 64403997 , Hhcs 12Mm X 50Mm C8 Part No.- 64404005 , Hhcs 16Mm X 30Mm C8 Part No.- 64404012 , Fhcs 10-24 X 3/4 C8 Part No.- 64404036 , Shcs 10Mm X 20Mm C8 Part No.- 64404098 , Set Screw Part No.- 64404133 , Rhms10-32Unf X 1/2 Part No.- 64404154 , Rhms10-32Unf X 1 Part No.- 64404157 , Rhms10-32 X 1 1/2 Part No.- 64404158 , Hhcs 1 X 12 Uns-Special G8 Part No.- 64404173 , Locknut, Stover Part No.- 64404225 , Stov Loc Nut 1F8 Part No.- 64404227 , Stov Lock Nut 3/4 C8 Part No.- 64404246 , Stov Loc Nut 1C8 Part No.- 64404248 , Lockwasher Part No.- 64404371 , Lockwasher 5/1608 Part No.- 64404376 , Lockwasher 7/16 Part No.- 64404378 , Lockwasher 1 0808 Part No.- 64404384 , Lockwasher 5Mm 08 Part No.- 64404392 , Lockwasher Part No.- 64404393 , 12Mm Flatwasher Part No.- 64404408 , 16Mm Flatwasher Rb Part No.- 64404454 , Hhcs 12Mm X 150Mm C8 Part No.- 64404501 , Hhcs 24Mm X 80Mm C10.9 Part No.- 64404503 , Hhcs 6Mm X 40Mm Part No.- 64404508 , Lh Side Cutterpart No.- 64540264 , Rh Side Cutter Part No.- 64540265 , Canopy, Ejc-522 Part No.- 64543369 , Plug Part No.- 64543504 , Plug Part No.- 64543506 , Accumulator Charge Valve Part No.- 64544394 , Brake Valve Part No.- 64544448 , Hoist Cylinder Assy Part No.- 64544827 , Exhaust Pipe Weldment Part No.- 64545673 , Snubber Part No.- 64546399 , Oil Temp Switch Part No.- 64546487 , Hardened Sleeve Part No.- 64546893 , Filter, High Pressure Part No.- 64547162 , Liquid Level Gauge Part No.- 64547234 , Ejc 522 Steer Cylinder Assy Part No.- 64547295 , Piston Seal Part No.- 64547525 , Seal Kit, 522 Steer Cylinder Part No.- 64547557 , Lower Dump Cylinder Pin Part No.- 64547632 , Plate, Mounting Part No.- 64547634 , Pin - Dump Box To Rear Frame Part No.- 64547872 , Liguid Level Gauge Part No.- 64547905 , Ring - Spacer Part No.- 64547931 , Plate - Keeper Part No.- 64548043 , Shuttle Valve, #6 Sae Ports Part No.- 64548133 , Catalytic Muffler Part No.- 64548161 , Tow Pin Part No.- 64548257 , Connector - 2 Pin Amp. Part No.- 64548478 , Shcs 16Mm X 35Mm Gr. 12.9 Part No.- 64548691 , Setscrew, Cup Pt. 24Mm X 30Mm Part No.- 64548692 , Machining Dump Lever Part No.- 64549110 , Prop Tube Machining, 522 Part No.- 64549148 , Mounting Block Part No.- 64549308 , 1/8Shim Plate Part No.- 64549310 , Guard, Driveline Part No.- 64549387 , Guard, Driveline Part No.- 64549389 , Guard, Driveline Part No.- 64549408 , Plate Part No.- 64550114 , Manifold Part No.- 64550116 , Manifold Block Part No.- 64550268 , Mtg Bracket Weldt, Trans Filter Part No.- 64551603 , Tube Assembly Part No.- 64551803 , Tube Assembly Part No.- 64551804 , Tube Assembly Part No.- 64551884 , Reflective Safety Tape Pur/Sold/Ft Part No.- 64551886 , Pump 4-Bolt C, 3.19 Cu In/Rev Part No.- 64552024 , Directional Control Valve Part No.- 64552051 , Steer Cylinder Pin, Rear Part No.- 64552133 , Pin - Articulation Part No.- 64552257 , Thrust Washer Part No.- 64552287 , Thrust Washer Part No.- 64552289 , Thrust Washer Part No.- 64552290 , Filter Access Cover Part No.- 64552297 , Pin - Front Steering Part No.- 64552299 , Block, Manifold, Dump/Brake Part No.- 64552322 , H663 04 01050 4Fj 4Fjb Part No.- 64552735 , H663 08 01600 8Fr 8Fra Part No.- 64552812 , H2661 20 00500 24Flb 20Fr Part No.- 64552851 , Dump Cylinder Seal Kit Part No.- 64552859 , Cover, Rear Part No.- 64552879 , Shcs 8Mm X 1.25,180Mm Part No.- 64552938 , H663 04 0067 4Fjb 4Fjb Part No.- 64555463 , H663 04 01524 4Fjb 4Fj Part No.- 64555465 , H663 04 01624 4Fjb 4Fjb Part No.- 64555466 , Special Adapter Part No.- 64555568 , Steering Column Part No.- 64555593 , Pump Tandem, Ejc - 522 Part No.- 64555614 , Steering Wheel, 13 Part No.- 64555673 , Hgh781 16 00570 16Fr 16Fr Part No.- 64555983 , Hgh781 16 00550 16Fr 16Fr Part No.- 64555984 , Contact Block 2Nc Part No.- 64556029 , Rubber Door Stop Part No.- 64556038 , Relay Module Part No.- 64556384 , Hgh663 6 00360 6Frb 6Frb 090 Part No.- 64556777 , C.B. 35A, Manual Reset Part No.- 64556962 , Relay Module Part No.- 64557067 , Inline Check Valve, 5 Psi Crack Part No.- 64557162 , Gear Shift Control Part No.- 64557229 , Multi-Functional Timer Part No.- 64557458 , Accumulator, 1 Gallon (Charged) Part No.- 64557971 , Harness-Limit Switch Part No.- 64562867 , Square Indicator Light Pb Red Part No.- 64563207 , Axle Cradle Machining, Part No.- 64564246 , Driveshaft 8 C W/Slip U-Joints Part No.- 64564507 , 8C Driveshaft, Ejc Part No.- 64564550 , Hhcs 1 1/4 X 17 1/2 Unf Part No.- 64564614 , Dump Box Part No.- 64564764 , Brake System Sol. Vlv. Inst. Part No.- 64564801 , Toggle Switch Part No.- 64565335 , Lockwasher Part No.- 64567392 , T-Bolt, 2.13-2.44 Part No.- 64567645 , T-Bolt, Clamp 4.13 - 4.44 Part No.- 64567646 , Elbow Silicon 2-90 Deg. Part No.- 64568686 , Flat Hex Socket Capscrew Part No.- 64569153 , Transmission, 6422, Ejc-522 Part No.- 64569193 , Hyd Connection Plate Weldment Part No.- 64569217 , Washer-Engine Mount Part No.- 64569371 , Gasket, Murphy Display Part No.- 64569809 , Tube Assembly Part No.- 64569810 , U-Bolt (5/16-18) Part No.- 64570426 , Oil Temp Gauge Part No.- 64572287 , Oil Pressure Gauge Part No.- 64572293 , Pressure Manifold Part No.- 64573294 , T-Bolt Clamp, 3.63 - 3.94 Part No.- 64573745 , Tube Assy Part No.- 64573956 , H781 12 00720 12Fr12 12Fr12 Part No.- 64574266 , Divider Assy-Master Part No.- 64574491 , Divider Assy-Secondary Part No.- 64574493 , H663 04 02000 4Fj 4Fj Part No.- 64574563 , H663 04 00480 4Fj 4Fjb Part No.- 64574564 , H663 04 00440 4Fj 4Fjb Part No.- 64574565 , H663 04 00270 4Fj 4Fjb Part No.- 64574566 , H663 04 00430 4Fj 4Fjb Part No.- 64574567 , H663 04 00840 4Fj 4Fja Part No.- 64574568 , H663 04 00900 4Fj 4Fj Part No.- 64574569 , H663 04 00800 4Fj 4Fj Part No.- 64574570 , H663 04 01040 4Fj 4Fj Part No.- 64574571 , H663 04 00840 4Fj 4Fj Part No.- 64574572 , H663 04 00660 4Fj 4Fj Part No.- 64574573 , Faceplate Part No.- 64574633 , Faceplate Part No.- 64574634 , 10Mm Tube Assy Part No.- 64574641 , 16Mm Tube Assembly Part No.- 64575207 , 16Mm Tube Assembly Part No.- 64575211 , Guard Part No.- 64575335 , Guard Part No.- 64575383 , Hgh781 04 00800 4Frb 4Frb Part No.- 64575652 , Hgh781 04 00140 4Frb 4Frb Part No.- 64575655 , Hgh781 12 01000 12Fr 12Frb Part No.- 64575705 , Hydraulic Tank Weldment-Steel,522 Part No.- 64577072 , Hydraulic Tank Group-Steel Part No.- 64577073 , Bar, Artic Lock Part No.- 64577397 , Pin, Lock Bar Part No.- 64577403 , Capscrew Part No.- 64578056 , Low Hyd Oil Sensor Part No.- 64579267 , Thrust Washer Part No.- 64579363 , Hhcs 20Mm X 40Mm Part No.- 64579389 , Tube Weldt Part No.- 64579664 , Bracket, Mtg Part No.- 64579665 , Tube Part No.- 64579678 , Cartridge Part No.- 64580612 , Front Frame Machining Part No.- 64581682 , Engine Mount, Rear Left Part No.- 64581766 , Engine Mount, Rear Right Part No.- 64581804 , Spacer - Fan Mbenz, 522 Part No.- 64581900 , Pump, Brake Cooling - 522 Mbenze Part No.- 64581937 , Engine, Mercedes Benze Om926la - 522 Part No.- 64582160 , Tank, Expansion L&M Part No.- 64582503 , Tube, Radiator Supply Part No.- 64582585 , Transmission Cooler Part No.- 64582637 , Tube, Cac Inlet Part No.- 64582641 , Pipe, Return-Cac Part No.- 64582642 , Silicon 4-Ply, Connector, 3.5 Id Part No.- 64582804 , Silicon Connector, 3.5 Id X 3.5 Part No.- 64582822 , 140 Amp 24V Alternator Part No.- 64583761 , 4 45 Deg Elbow (Exhaust) Part No.- 64583839 , Fan, Suction 32 Dia - 522 Part No.- 64583930 , Belt, Serpentine - 522 W/O A/C Part No.- 64584024 , 522 Mbenz Alternator Pulley 2.93 Part No.- 64584043 , Tube Assy Part No.- 64584175 , Converter, Cl8572, Ejc 522 Part No.- 64584203 , Pipe, Return-Cac Part No.- 64584271 , Operator Comparmt-522 Mercedes Part No.- 64584277 , Cooling Shroud Weldt - 522 Mbenz Part No.- 64584462 , Grill Assembly, Front Part No.- 64584640 , Support Bracket, 3.5 Tube Part No.- 64584718 , Seat, Assy - Vinyl Part No.- 64584784 , Instrument Panel Grouppart No.- 64585167 , Instrument Panel Assemblypart No.- 64585169 , Enclosure Part No.- 64585171 , Front Box Harness Part No.- 64585176 , Door Weldment, R/H Outrigger Part No.- 64585386 , Door Weldment, R/H Outrigger Part No.- 64585392 , Cover Weldment, Engine Part No.- 64585395 , Cover Part No.- 64585396 , Cover Part No.- 64585400 , Cover Part No.- 64585418 , Cover Part No.- 64585420 , Cover Part No.- 64585422 , Hood Part No.- 64585453 , Tube Assy-Tank,Return Part No.- 64585755 , Tube Assy-Brk Cool Return Part No.- 64585760 , Tube Assy-Brake Pressure In Part No.- 64585761 , Tube Assy-Pressure In Part No.- 64585762 , Tube Assy-Pilot Pressure Part No.- 64585763 , Hgh781 06 00520 6Fr 6Frb Part No.- 64585811 , Bracket Part No.- 64585901 , Upper Belt Guard Weldment Part No.- 64585903 , Valve, Brake Relay - 1700 Psi Max Part No.- 64585926 , Exhaust Cover Weldment Part No.- 64586150 , Welding Assembly Part No.- 64586211 , Pipe Part No.- 64586468 , Valve, Shuttle Part No.- 64586473 , Hgh781 06 01840 6Frb 6Fr Part No.- 64586534 , Manifold, 522 Accumulator Part No.- 64586795 , Tube Assembly Part No.- 64586802 , Tube Assembly Part No.- 64587077 , Tube Assembly Part No.- 64587080 , Tube Assembly, Filter Part No.- 64587111 , Tube Assembly Part No.- 64587957 , Weldment, Filter Bracket Part No.- 64587964 , Tube-Scavenge Pump To Filter Part No.- 64588123 , Bracket, Clamp-Trans Line Part No.- 64588238 , Manifold, 2-Port Part No.- 64588339 , Brkt Weldt, Clamp-Trans Ln Part No.- 64588413 , Bracket, Oil Dip Stick Part No.- 64588783 , Hgh781 08 01850 8Fr 8Fra Part No.- 64589132 , Hgh781 06 01210 6Fr 6Frb Part No.- 64589133 , Hgh781 06 01540 6Fr 6Frb Part No.- 64589143 , Hgh781 06 00270 6Fr 6Frb Part No.- 64589153 , Hgh781 06 01570 6Fr 6Frc Part No.- 64589172 , Hgh781 06 01850 6Fr 6Frb Part No.- 64589183 , Hgh781 08 02070 8Fr 8Frb Part No.- 64589203 , Hgh781 06 01580 6Fr 6Frb Part No.- 64589220 , Hgh781 04 01290 4Fr 4Frb Part No.- 64589309 , Hgh781 04 00370 4Fr 4Frb Part No.- 64589313 , Hgh781 06 00390 6Frb 6Frb Part No.- 64589585 , Hgh781 06 00300 6Frb 6Frc Part No.- 64589586 , H2661 32 00700 32Fl 24Flb Part No.- 64589701 , Weldment Cover Part No.- 64589897 , Weldment, Access Door Part No.- 64590118 , Radiator, Mercedes Engine (69041324 + 69041325) Part No.- 64590898 , Weldt, Support Bracket Part No.- 64590976 , Hgh781 06 00270 6Frb Part No.- 64591100 , Hgh781 04 00360 4Fr 4Frb Part No.- 64591103 , Hgh781 04 00310 4Fr 4Frb Part No.- 64591105 , Decal Ejc 30Sx 175Mm Part No.- 64591667 , Disconnect Faceplate, 522 Mbenz Part No.- 64592120 , Decal_Sandvik_Logo_210Mm Part No.- 64592181 , Hgh663 08 01820 8Fr 8Frb Part No.- 64592238 , Hgh663 08 01980 8Fr 8Fra Part No.- 64592257 , Hgh2661 12 00900 12Fra 12Frc Part No.- 64592316 , Hgh781 06 00800 6Fr 6Fra Part No.- 64592333 , Hgh781 06 00780 6Fr 6Fra Part No.- 64592334 , Tube, Return-Trans Cooler Part No.- 64594710 , Tube, Supply-Trans Cooler Part No.- 64594711 , Tube, Radiator Inlet Part No.- 64594768 , Coolent Hose Vibra Flex Part No.- 64594931 , Rim Assembly, 30Sx Part No.- 64594975 , Hgh781 12 00300 12Fr 12Frb Part No.- 64596357 , T-Bolt Clamp 5 1/2 Part No.- 64596769 , Mtg Bracket Weldment - Air Intake Part No.- 64596935 , Hgh781 12 00490 12Fjb 12Fjb 60 Part No.- 64597162 , Hgh663 08 01820 8Fr 8Frb Part No.- 64597281 , 7C Driveshaft, Ejc 522 Part No.- 64599337 , Hgh781 04 00194 4Frb 4Frc Part No.- 64603238 , Hgh781 04 00300 4Fr 4Frb Part No.- 64603242 , Hgh663 06 00660 6Fr 6Frb Part No.- 64603259 , Hgh781 04 01980 4Fr 4Fra Part No.- 64603262 , Hgh781 08 01340 8Fr 8Frb Part No.- 64603292 , Hgh781 08 01354 8Fr 8Frc Part No.- 64603294 , Hgh781 08 01320 8Fr 8Frb Part No.- 64603295 , Hgh781 04 00200 4Frb 4Fr Part No.- 64603296 , Hgh781 08 00340 8Frb 8Frc 180 Part No.- 64603297 , Hgh781 08 00350 8Frb 8Frc 180 Part No.- 64603298 , Hgh194 20 00592 20Fr 24Flb Part No.- 64603397 , Hgh194 20 00390 20Fr 20Frc Part No.- 64603398 , Hgh194 20 00360 20Fr 20Frc Part No.- 64603401 , Hgh194 20 00594 20Frb 20Frb Part No.- 64603403 , Hgh781 06 01050 6Frb 6Frb 180 Part No.- 64603404 , Valve, Reel Shifter Part No.- 64610626 , Rim Only Part No.- 64624906 , Clamp, Hose Part No.- 64800006 , 1/8 Npt Grease Fitting Part No.- 64800138 , Cotter-Hair Pin Part No.- 64800236 , Cotter, Hair Pin Part No.- 64800237 , S S Hose Clamp 13/16-1 1/2 Part No.- 64800307 , Test Block-4Bolt Split Fl Conn Part No.- 64801325 , Strainer Suction Part No.- 64802277 , Gasket Pump Part No.- 64802577 , Breaker Circuit 70 Amps Part No.- 64802737 , Switch, Pressure 150 Psi - Nc Part No.- 64802824 , Ring Steer Cylinder Pin Part No.- 64802931 , O-Ring Part No.- 64803020 , Keeper-Pin Part No.- 64803734 , U-Joint Part No.- 64803751 , Pump, Charge, Converter Part No.- 64803768 , Switch, Battery Part No.- 64804229 , Gasket Pump Part No.- 64804339 , Cap Assly Part No.- 64804353 , Spacer Part No.- 64804681 , Cable Accelerator Part No.- 64805139 , Steering Cylinder Pin Part No.- 64805348 , Bushing Part No.- 64805430 , Pin Part No.- 64805441 , Park Brake Valve Assly Part No.- 64805648 , U Bolt Set Part No.- 64805769 , Joint Bearing Part No.- 64805770 , Driveline 975-940331 Part No.- 64805863 , Spider Assembly Part No.- 64806120 , Check Valve Part No.- 64806227 , Relief Valve Part No.- 64806237 , Spider Assembly Part No.- 64806419 , Seal Kit Part No.- 64845505 , Spider Assembly Part No.- 65070520 , Mounting Center Bonded Part No.- 65083455 , Governor Part No.- 65363039 , Valve, Wheel Part No.- 65392009 , Spud, Valve Part No.- 65392047 , Spacer, (Steering Cyl.) Part No.- 65399056 , Service Kit (For 911-31010) Part No.- 65531020 , Sprocket Part No.- 65531028 , Kit, Service Part No.- 65534033 , Seal Kit Part No.- 65534034 , Roller (65561106) Part No.- 65561107 , Shaft Part No.- 65561108 , Bracket Part No.- 65561109 , Gasket, Pump Part No.- 65612028 , Spider Assemblysee Notes (T) Part No.- 65615053 , Gasket Part No.- 65625086 , Gasket 912 Pump Drive Part No.- 65631025 , Gauge & Hose Assy, Charging (Ejc88) Part No.- 65664005 , Element Kit, Trans. Filter Part No.- 65812024 , Lock Collar Part No.- 65850143 , Valve, Check Part No.- 65863028 , Pin, Lower Articulation Part No.- 68055233 , Driveline Convertor To Gearbox Part No.- 68055308 , Bearing Radial Ball Part No.- 68057635 , Spacer Cable Drum Part No.- 68059227 , Spacer Cable Drum Part No.- 68059235 , Switch Temperature Part No.- 68059821 , Clamp Part No.- 68059920 , Clamp Part No.- 68066966 , Bearing, Radial Ball 60Mm* Part No.- 68069978 , Shaft, Stub Part No.- 68069986 , Seal Kit, 6 Cylinder Part No.- 68073988 , Seal Kit, 3.5 Cylinder Part No.- 68074218 , Filter Hyd Return Part No.- 68081775 , Axle, Front Part No.- 68082252 , Belt Set Part No.- 68082914 , Bushing, Articulation Part No.- 68083060 , Pump Hydraulic Cooling System Part No.- 68083086 , Bushingpart No.- 68083110 , Pin Lift Armpart No.- 68083128 , Pin Pivot Part No.- 68083151 , Pump Hydraulic Part No.- 68083169 , Valve Foot Paddle Part No.- 68083276 , Filter Hyd Suction Part No.- 68083284 , Bushing, Lift Arms Part No.- 68083375 , Pin, Lift Cylinder Part No.- 68083573 , Pin, Dump Cylinder Part No.- 68083664 , Plate, Lock Part No.- 68083946 , Switch, Pressure Part No.- 68084001 , Pin Part No.- 68084142 , Coupling Adopter Part No.- 68084183 , Pin Part No.- 68084373 , Yoke Part No.- 68084407 , Driveline, Rear Part No.- 68084456 , Sheave Part No.- 68084597 , Driveline, Front Part No.- 68084761 , Valve, Horsepower Override Part No.- 68085313 , Valve, Shuttle Part No.- 68085321 , Bucket Lip Part No.- 68089745 , Sleeves, Lift Arms Part No.- 68090099 , Sleeve Link Part No.- 68091246 , Link Dump Part No.- 68091253 , Pin, Link Part No.- 68091261 , Clamp Part No.- 68091386 , Clamp Part No.- 68091394 , Bushing Pump Sleeve Part No.- 68092665 , Pin Part No.- 68092806 , Tube Assly Part No.- 68092848 , Tube Assembly Brazed Part No.- 68092855 , Sprocket Part No.- 68092905 , Switch, Keyless Start Part No.- 68093325 , Manifold Hydraulic Part No.- 68093606 , 25Mm Hyd. Tube (60)(Jic) Part No.- 68093614 , Tube Assembly Part No.- 68093622 , Tube Assembly Part No.- 68093838 , Tube Assembly Part No.- 68094257 , Tube Assembly Part No.- 68094273 , Tube Assembly Part No.- 68094505 , Tube Assembly Part No.- 68094513 , Tube Assembly Part No.- 68094778 , Tube Assembly Part No.- 68095239 , Alternator Part No.- 68098639 , Seal Kit, Lift Cylinder Part No.- 68099694 , Shim Part No.- 68102142 , Shim Part No.- 68102159 , Orbitol Valve Assly Part No.- 68103504 , Stop Assembly Part No.- 68109931 , Releif Valve, Port Part No.- 69003582 , Relief Valve, Main Part No.- 69003584 , Seal, Pocket Part No.- 69003676 , Seal Lip Part No.- 69003729 , Lubrication Fitting Part No.- 69003887 , Ss Wire Part No.- 69004119 , Element, Fuel Prefilter Part No.- 69005107 , Gasketpart No.- 69008272 , O-Ring Part No.- 69008788 , Element, Filter Part No.- 69008925 , Oil Seal Part No.- 69010017 , Oil Seal Part No.- 69010023 , Control Valve Switch Part No.- 69010040 , Yoke Fittings Part No.- 69010133 , Flange Part No.- 69010137 , Gasket Part No.- 69010150 , Clutch Plate Part No.- 69010164 , Elbow 90 Part No.- 69010167 , Dip Stick Part No.- 69010169 , Tube Part No.- 69010170 , Element, Filter Part No.- 69010177 , Base Filter Part No.- 69010178 , Seal Leather Cut Part No.- 69010287 , Disk Plate Part No.- 69010313 , Seal Kit Part No.- 69011309 , Kit Relief Valve Part No.- 69011310 , Seal Kit Part No.- 69011311 , Pin, Cotter Part No.- 69011321 , Spring Part No.- 69011322 , Pin, Detent Part No.- 69011323 , Bracket Handle Part No.- 69011330 , Pin, Handle Part No.- 69011331 , Seal, Spool Part No.- 69011332 , O Ring Part No.- 69011447 , Handle Assembly Part No.- 69011499 , Spring Compression Part No.- 69013490 , Check Poppet Part No.- 69013493 , Cartridge, Relief Valve Part No.- 69013494 , Tubepart No.- 69013764 , Capscrew Part No.- 69013800 , Cap, 2 3/4 (7 Psi) - For 64582503 Part No.- 69013828 , Retainer, Tube Part No.- 69013831 , Washer Cupped Part No.- 69013832 , Seal Kit Part No.- 69014470 , Lining Kit Part No.- 69014484 , Lining Assembly Part No.- 69014492 , Back Up Ring Part No.- 69014529 , Back Up Ring Part No.- 69014530 , O Ring Part No.- 69014531 , Spring Bellville Part No.- 69014541 , Regulator Voltage, 24 Volt Part No.- 69014658 , 100V,35Amp Bridge Rectifier Part No.- 69015862 , Head Assey Part No.- 69016565 , Screen Part No.- 69016566 , Ring Sealing Part No.- 69017820 , Flange Companion Part No.- 69018594 , Sleeve Yoke Part No.- 69018595 , Shaft Yoke Part No.- 69018598 , Flange, Companion Part No.- 69018604 , Gauge Pressure Part No.- 69018707 , Switch, Vacuum Part No.- 69018713 , Seal Kit, Filter Part No.- 69018714 , Seal Kit Filter Part No.- 69018715 , Gauge, Pressure Part No.- 69018716 , Gauge Vaccum Part No.- 69018721 , Spider Assy Part No.- 69018900 , Rod End Part No.- 69021564 , Cartridge Sleeve Part No.- 69021593 , Repair Kit ( For 64118023) Part No.- 69021603 , Service Kit Part No.- 69021604 , Strco Ground Fault Relay Part No.- 69021672 , Air Cleaner Part No.- 69022451 , Repair Kit Part No.- 69022710 , Yoke Part No.- 69025001 , Stud Part No.- 69026901 , Slip Yoke Part No.- 69026960 , Primary Filter Element Part No.- 69029995 , Master Lockout Switch Part No.- 69031579 , Safety Filter Element Part No.- 69032289 , Insert Assembly Part No.- 69032368 , Bypass Assembly Part No.- 69032372 , Circuit Breaker Part No.- 69032916 , Vaccum Starter Part No.- 69032934 , Zero Sequence Ct Part No.- 69032935 , Wrench, Filter Collar Part No.- 69032991 , O-Ring Part No.- 69034204 , Seal Kit Part No.- 69034206 , End Cover Part No.- 69034212 , End Cover Part No.- 69034213 , Plug Part No.- 69034217 , Shock And Suction Valve Assy Part No.- 69034218 , Spring Guide Part No.- 69034221 , Drive Screw Part No.- 69034222 , Plug And O-Ring Part No.- 69034229 , Counter Pressure Valve Complete Part No.- 69034233 , Ball Bearing Part No.- 69034266 , Spring Kit Part No.- 69034269 , R/B 69034313 Service Kit Part No.- 69034313 , Rim Weldt 416 (Gkn) Part No.- 69034429 , Installation & Removal Tool For 64582637 Part No.- 69034842 , Seal, Retaining Tool (For 64582637) Part No.- 69034843 , Valve Extension Part No.- 69034983 , Gf Reset Light Pad Part No.- 69035018 , Reset Button Part No.- 69035022 , Repair Kit Part No.- 69035080 , Repair Kit, Park Brake Part No.- 69035097 , Rubber Gasket Part No.- 69035533 , Sponge Vci-101 Part No.- 69035534 , Gasket (For 64582637) Part No.- 69035578 , Base Assembly Part No.- 69035611 , Pedal Assembly Part No.- 69035612 , Seal Kit Part No.- 69035624 , O-Ringpart No.- 69036436 , Valve Assembly Part No.- 69036481 , Sensor Kit Part No.- 69036542 , Lining Kit Part No.- 69036674 , Repair Kit Part No.- 69036892 , Filler Cap Part No.- 69037071 , Oring Part No.- 69037650 , Seal Kit Part No.- 69038009 , Seal Kit Part No.- 69038438 , Bearing Flange Part No.- 69039040 , Differential Part No.- 69039943 , Reverse Phase Relay Part No.- 69040148 , Fuse Seconadry Part No.- 69040151 , Solenoid 24 Vdc - Was 69040266 (Dupl) Part No.- 69040257 , Stud Assy Part No.- 69040261 , Axle Housing Part No.- 69040317 , Piston Part No.- 69040331 , Diff Side Gear Part No.- 69040355 , Lock Plate Part No.- 69040366 , Spherical Plain Shaft Bushing Part No.- 69040396 , Back Cover Part No.- 69040923 , Seat Cover Part No.- 69040924 , Lh Armrest Part No.- 69040925 , Rh Armrest Part No.- 69040926 , Wing Nut Part No.- 69040986 , Repair Kit Part No.- 69041037 , Adm 18 Pin Connector Part No.- 69041292 , Adm 15 Pin Connector Part No.- 69041293 , Adm 12 Pin Connector Part No.- 69041294 , Terminal (Female Socket) Part No.- 69041295 , Connector, 14 Pin Part No.- 69041303 , Aftercooler Assembly Part No.- 69041324 , Radiator Assembly Part No.- 69041325 , Fan Shroud Part No.- 69041326 , Fan Guard Standard Part No.- 69041327 , Fan Ring Part No.- 69041328 , Tubes, V-Fin Its Part No.- 69041331 , Water Pump - Reman Only Part No.- 69041377 , Boost Sensor Part No.- 69041378 , Boost Sensor O-Ring Part No.- 69041379 , Thermostat Part No.- 69041381 , Fuel Supply Pump Part No.- 69041382 , Fuel Pump Gasket Part No.- 69041383 , Engine Wiring Harness Part No.- 69041384 , Oil Filter Element Part No.- 69041385 , Belt Tensioner Part No.- 69041386 , Adm Module Part No.- 69041387 , Fuel Temp Sensor Part No.- 69041389 , Water Temp Sensor (Old Part No.69041391) Part No.- 69041390 , Tubes, V-Fin Its Part No.- 69041431 , Cover Part No.- 69041439 , Cover Part No.- 69041440 , Spring, Top Part No.- 69041672 , Fuel Filter Assy Part No.- 69042855 , Switch, Lighted Pb (Red) Part No.- 69043359 , O-Ring Part No.- 69043404 , Piston 929 Part No.- 69043750 , Gasket Part No.- 69043928 , Valve, Relief Part No.- 69043929 , Gasket Part No.- 69043930 , Stud Part No.- 69043932 , Seal Ring Part No.- 69043936 , Injector Part No.- 69043937 , Kit Main Br Part No.- 69043938 , Gasketrb Part No.- 69043942 , Cover Valve Part No.- 69043944 , Gasket Kit Part No.- 69043945 , Washer Thrust Part No.- 69043948 , Seal Part No.- 69043950 , Gasket Part No.- 69043952 , Gasket Part No.- 69043953 , Rod Br Kit Part No.- 69043955 , Pump Oil Part No.- 69043958 , Gasket Head Part No.- 69043959 , Gasket Part No.- 69043978 , Water Pump Part No.- 69044015 , Pump Dupl 04521075,04521125,04521264 Part No.- 69063390 , Pin Part No.- 70012234 , Pin Part No.- 70012293 , Piston Part No.- 70130094 , Bushing Part No.- 70180417 , Telescopic Canopy Part No.- 70271415 , Protector Part No.- 70271555 , Section Part No.- 70290551 , Plate Part No.- 70300878 , Flange Part No.- 70361520 , Front Flange Part No.- 70361766 , Rear Flange Part No.- 70361847 , Stop Part No.- 70420376 , Shim Part No.- 70430555 , Box Part No.- 70470186 , Plate Part No.- 70533831 , Plate Part No.- 70533850 , Plate Part No.- 70533964 , Plate Part No.- 70533977 , Plate Part No.- 70533993 , Plate Part No.- 70534313 , Plate Part No.- 70534368 , Plate Part No.- 70534375 , Plate Part No.- 70534459 , Yoke Part No.- 70541195 , Outrigger Part No.- 70570114 , Bracket Part No.- 70594604 , Support Part No.- 70595010 , Support Part No.- 70595061 , Support Part No.- 70595171 , Support Part No.- 70595405 , Support Part No.- 70600409 , Lever Part No.- 70630937 , Connection Rod Part No.- 70640365 , Union Part No.- 70801049 , Union Part No.- 70801050 , Union Part No.- 70801062 , Union Part No.- 70801102 , Union Part No.- 70801160 , Union Part No.- 70801181 , Union Part No.- 70801255 , Strap Part No.- 70810242 , Strap Part No.- 70810258 , Pipe Part No.- 70821126 , Manifold Part No.- 70821219 , Stinger Part No.- 70850090 , Stinger Part No.- 70850197 , Spring Part No.- 70880268 , Spring Part No.- 70880271 , Rail Part No.- 70900074 , Rail Part No.- 70900157 , Rail Part No.- 70900158 , Decal Part No.- 70961768 , Decal Part No.- 70961816 , Decal Part No.- 70961822 , Decal Part No.- 70961830 , Decal Part No.- 70961908 , Decal Part No.- 70961945 , Decal Part No.- 70961989 , Decal Part No.- 70961994 , Decal Part No.- 70962019 , Spacer Part No.- 71020688 , Brake Cylinder Part No.- 71055093 , Service Kitpart No.- 71064050 , Regulator Part No.- 71064052 , Brake Disc Part No.- 71081402 , Diesel Engine Bf4l2011 Part No.- 71195664 , Bushing Part No.- 71402450 , Tire,Tube With Flappe Part No.- 73101569 , Tire Valve Part No.- 73101662 , Bushing Part No.- 73213072 , Cup Part No.- 73270300 , Flange Part No.- 73360920 , O Ring Part No.- 73414039 , O Ring Part No.- 73414212 , O Ring Part No.- 73414586 , O Ring Part No.- 73414772 , O-Ring Part No.- 73415042 , Bushing Part No.- 73415166 , Guide Bushing Part No.- 73417220 , Oil Tank Part No.- 73491501 , Lock Plate Part No.- 73711014 , Seat Part No.- 73790503 , Elbow Part No.- 73802809 , Union Part No.- 73803420 , Union Part No.- 73809804 , Purifier Part No.- 73833001 , Suspension Part No.- 73880126 , Support Part No.- 73880140 , Bit-Cone Part No.- 73941060 , Decal Rb Part No.- 73960100 , Cable Terminal Part No.- 74010302 , Working Light Part No.- 74011401 , Extension Cable Part No.- 74014001 , Connector Part No.- 74016003 , Pulley Part No.- 74021063 , Sight Indicator Part No.- 74022007 , Electric Motor Part No.- 74031816 , Electric Motor Part No.- 74031828 , Brass Plug Part No.- 74032504 , Brass Plug Part No.- 74032508 , Brass Plug Part No.- 74032520 , Brass Lock Nut Part No.- 74032544 , Lock Nut Part No.- 74032548 , Brass Lock Nut Part No.- 74032564 , Reducer Part No.- 74032616 , Reducer Part No.- 74032625 , Reducer Part No.- 74032628 , Reducer Part No.- 74032634 , Fruse Holder Part No.- 74033004 , Electric Cable Part No.- 74033125 , Wire Part No.- 74034360 , Wire Part No.- 74034362 , Wire Part No.- 74034364 , Wire Part No.- 74034370 , Wire Part No.- 74034372 , Wire Part No.- 74034373 , Wire Part No.- 74034374 , Sheath Part No.- 74038310 , Sheath Part No.- 74038312 , Cap Part No.- 74038322 , Wire Assy Part No.- 74038331 , Wire Assy Part No.- 74038332 , Seal Part No.- 74038342 , Body Part No.- 74038351 , Section Part No.- 74038352 , Sleeve Part No.- 74038360 , Selector Switch Part No.- 74080380 , Relay Part No.- 74130800 , Relay Part No.- 74130804 , Plate Part No.- 74165002 , Seal Part No.- 74194560 , Plug Part No.- 74194570 , Seal Part No.- 74194580 , Gland Part No.- 74196131 , Hood Part No.- 74196416 , Base Plate Part No.- 74196428 , Hood Part No.- 74196484 , Hood Part No.- 74196486 , Union Part No.- 74196541 , Cable End Fitting Part No.- 74200932 , Profile L=2000 Part No.- 74201362 , Fixing Plate Part No.- 74201365 , Profile U Part No.- 74201369 , Contactor Part No.- 74201549 , Contactor Part No.- 74201621 , Switch Block Part No.- 74202240 , Locking System Part No.- 74202250 , Block Part No.- 74202260 , Block Part No.- 74202261 , Contactor Part No.- 74202290 , Contactor Part No.- 74202294 , Bushing Part No.- 75212026 , Guide Part No.- 75463195 , Piston Rod Guide Ring Part No.- 75463229 , Rod Part No.- 75625845 , Spring Part No.- 75880010 , Articulation Part No.- 76130120 , Cylinder Part No.- 76317082 , Cylinder Part No.- 76318350 , Cylinder Part No.- 76322158 , Rotary Actuator Part No.- 76350010 , Seal Kit ( 84314300) Part No.- 76350050 , Bushing Kit (84314300) Part No.- 76350051 , Check Valve Part No.- 76350074 , Seal Kit Part No.- 76350075 , Bushing Kit Part No.- 76350076 , Cable Reel Part No.- 77005176 , Charging Valve Part No.- 77005272 , Cap Part No.- 77005545 , Valve Section Part No.- 77005567 , Electric Motor Part No.- 77005751 , Harness Assy Part No.- 77005780 , Illuminated Push Button Part No.- 77005825 , Moto Pump Group Part No.- 77006035 , Pin Part No.- 77006544 , Hex Jam Part No.- 77006545 , Pin Part No.- 77006547 , Cover Part No.- 77007057 , Control Valve Part No.- 77007142 , Pin Part No.- 77007219 , Seal Part No.- 77007229 , Cradle Assembly Part No.- 77007230 , Shim (Kit) Part No.- 77007296 , Shim (Kit) Part No.- 77007303 , Rod Part No.- 77007309 , Yoke Part No.- 77007317 , Differential Assy Part No.- 77007342 , Crown Wheel Part No.- 77007343 , Crown Wheel Part No.- 77007344 , Overcenter Valve Part No.- 77007356 , Radiatorpart No.- 77007540 , Repair Kit Part No.- 77007730 , Bracket Part No.- 77007849 , Coupling Part No.- 77007967 , Shim Kit Part No.- 77008135 , Shaft Part No.- 77008151 , Gear Part No.- 77008152 , Breather Part No.- 77008155 , Seal Part No.- 77008156 , Flange Part No.- 77008159 , Roller Bearingrb Part No.- 77008161 , Shaft Part No.- 77008168 , Shaft Part No.- 77008169 , Extension Sleeve Part No.- 77008171 , Gear Part No.- 77008174 , Gear Part No.- 77008176 , Gear Part No.- 77008177 , Accelerator Pedal Part No.- 77008675 , Plug Connector Part No.- 77009084 , Axle Lockating Pin Part No.- 77009601 , Guide Rollerpart No.- 77010549 , Bearingpart No.- 77010898 , Hood Part No.- 77011111 , Clogging Indicator Part No.- 77011124 , Flange Part No.- 77011209 , Electric Plug Part No.- 77012382 , Electric Plug Part No.- 77012383 , Collar Part No.- 77013292 , Flange Part No.- 77013293 , Housing Part No.- 77014814 , Shaft Part No.- 77014815 , Piston Sleeve Part No.- 77014817 , Cap Part No.- 77014818 , Hardware Kit Part No.- 77015441 , Collar Part No.- 77018915 , Coupling Kit Part No.- 77019746 , Differential Housing Part No.- 77021598 , Plug Part No.- 77722515 , Valve Part No.- 77722527 , Cartridge Part No.- 77722530 , Sequence Valve Part No.- 77722536 , Valve,Check Part No.- 77722540 , Cartridge Part No.- 77722541 , Cartridge Part No.- 77722542 , Cartridge Part No.- 77722545 , Valve Part No.- 77722547 , Valve Part No.- 77722548 , Cartridge Part No.- 77722551 , Relief Valve Part No.- 77722569 , Body Part No.- 77722713 , Valve Bank Part No.- 77790126 , Regulator Part No.- 77791511 , Rod Kit Part No.- 77791652 , Spool Part No.- 77793060 , Control Valve Part No.- 77793106 , Hydraulic Pump Part No.- 77794205 , Boom Armature Part No.- 78001181 , Boom Kit Part No.- 78003053 , Swivel Part No.- 78006207 , Divergence Part No.- 78010387 , Boom Swing Assembly Part No.- 78011265 , Front Head Part No.- 78050311 , Drilling Cradle Part No.- 78060481 , Fruel Tank Part No.- 78140216 , Oil Tank Part No.- 78140296 , Oil Tank Part No.- 78140325 , Hydraulic Tank Part No.- 78140326 , Gauge Part No.- 78144079 , Coupling Part No.- 78170147 , Direction Axera/Robolt 05 Part No.- 78203007 , Instrument Panel Part No.- 78260971 , Box Part No.- 78260973 , Operator Compartment Part No.- 78261111 , Safety Canopy With Cylinders Part No.- 78280963 , Cylinder Part No.- 78310107 , Cylinder Part No.- 78310162 , Cylinder Part No.- 78310164 , Cylinder Ni/Chromium Part No.- 78310171 , Sequence Valve Part No.- 78320319 , Flow Divider Part No.- 78320457 , Check Valve Assy Part No.- 78320498 , Flow Controler Part No.- 78320548 , Wire Assy Part No.- 78332111 , Voltage Frequency Adaptation Kit Part No.- 78336060 , Electric Harness Part No.- 78337106 , Kit Modification Part No.- 78402192 , Driveline Part No.- 78410323 , Relief Valve Part No.- 78410369 , Electric Panel Part No.- 78470094 , Beam Cc2512 Lefrt Part No.- 78511169 , Front Head Body Part No.- 79290071 , Valve Body Part No.- 79290083 , Front Head Part No.- 79290121 , Flange Part No.- 79360066 , Box Part No.- 79470129 , Beam Cc2512 Left Part No.- 79510371 , Bolster Part No.- 79520066 , Yoke Part No.- 79540106 , Cradle Support Part No.- 79590294 , Purifier Part No.- 79820516 , Pipe Part No.- 79820532 , B26 Left Armaturetube Part No.- 79820629 , Gas Valve Part No.- 80759069 , Gasket Part No.- 81584269 , Cover Part No.- 81602109 , Union Part No.- 81672639 , Seal Picker Part No.- 83371099 , Cappart No.- 85168219 , Regulator Part No.- 85798799 , Glue Part No.- 86982219 , U-Seal Part No.- 87218939 , Field Service Tools (See Kit List) Part No.- 88081719 , Seal Kit Part No.- 88253109 , Plug Part No.- 88538389 , 4-Pin Receptacle Kit Part No.- 88730459 , Seal Kitpart No.- 88748869 , Bearing Cone Taper Roller Part No.- 001019-002 , Sight Glass (Was Dupl 69014121) - For 64582503 Part No.- 021740-069 , Breaker Trip.Block Part No.- 74205210K , Coupling Part No.- Bg00624788 , Wheel Part No.- Bt00013813 , Blunt /Moil Pointpart No.- 634 , Spool Part No.- 4696427 , Special Tool Kit Part No.- 55047973 , Air Filterpart No.- 55071773 , Safety Cartridge Part No.- 55071791 , Pressure Gauge Part No.- 55181316 , Barrel Weldt. Part No.- 64257409 , Roller Part No.- 64269721 , Adapter Block, 32Sf To 16Npt Part No.- 64550607 , Axle Cradle Group Part No.- 64564245 , Axle Stop Part No.- 64564479 , Cover Weldment Part No.- 64586184 , Bracket, Fuel Water Sep. Weldt Part No.- 64587069 , Exhaust Cover Part No.- 64591256 , Valve, Steering Part No.- 64802776 , Assy.Steam Part No.- 69010109 , O Ring Part No.- 69010123 , Belt Part No.- 71191343 , O Ring Part No.- 73415112 , Nutpart No.- 73692722 , Screwpart No.- 73703908 , Allen Screwpart No.- 73703930 , Allen Screwpart No.- 73703935 , Screwpart No.- 73703950 , Allen Screwpart No.- 73703958 , Air Filter Part No.- 73831112 , Return Filterassembly Part No.- 73833203 , Filter Assembly Part No.- 73893256 , Union Part No.- 74196512 , Fremale Plug Part No.- 74196583 , Rail Part No.- 74196620 , Cylinder Part No.- 76310069 , Cylinder Part No.- 76322104 , Sealpart No.- 77006484 , Sealpart No.- 77006485 , Stop Part No.- 77007318 , Wiring Harness Assembly Part No.- 77007839 , Magnet Plugpart No.- 77008165 , Plugpart No.- 77008166 , Oil Filter Part No.- 77018784 , Cylinder Head Part No.- 77760682 , Wire Assy Part No.- 78332132 , Seal Cut (Jack )Part No.- 78402210 , Pressure Filter Part No.- 81558479 , Breather Part No.- 85079409 , Valve Pressure Relief Part No.- Bg00342122 , 500 Hrs Service Part No.- Bg00774191 , 1000 Hrs Service Part No.- Bg00774192 , 4000 Hrs Service Part No.- Bg00774231 , Adaptation Kit Ctn10 Part No.- Bt00008775 , Compressor Without And Motor Part No.- 37689401 , Terminal Nutpart No.- 70690411 , Threaded Rodd6part No.- 72207006 , Contact Block Part No.- 88534349
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Jharkhand View Result →
21.
Drinking Water Supply and Sanitation #10392650 Price Bid
Supply And Installation Of Submersible Pumping Machineries And Other Electromechanical Equipments At Babuijore Under Mohidapur Pwss Under Bolpur Block In The Dist Of Birbhum Under Bolpur Mechanical Division P H E Dte- 1 Submersible pumping machinery directly coupled with water proof suitable size motor having following specification :Pump:Duty condition -17 M^3/hr Head- 40 Mtr Shaft-stainless steel Impeller- S.S / GM Outlet Size: 50mm / 80mm. Motor:Submersible type 3 Ph , 50Hz, 415 Volt ± 10% 2900 RPM Motor must be suitable for operation with DOL starter.(Test certificate along with characteristic curve should be submitted at the time of delivery). 2 Supply, delivery at site and storage ofoutdoor type panel from store to site with all cost of loading and unloading as direction of EIC. 3 Supply Delivery And installation Of Suitable CRCA enclosure powder Coated Minimum 2mm IP55 protection And suitable for outdoor installation,the Enclosure should have Sufficient space for installation of WBSEDCL energy meter As well As Provision for smooth meter Reading Periodically(Size:3x1x5) 4 Making CC foundation for Support Of the Kiosk box After excavating the earth upto a Depth of0.6 Mtr below the GL including Supply of All materials Complete with 12 mm thick cement Plastering With Net Cement Finishing Complete As per Direction Of EIC 5 Supply delivery and Installation of 63 Amp main Switch at the suitable position of the kiosk Box For Receiving The Power 6 Making wire net fencing of the pump platfrom by supplying and fitting fixing of Galvanised MS Angle of approved quality which will be grouted in the earth by cement concret as per dieection of EIC including an arrangement for a get with lock and key facility as per direction of EIC 7 Supply,delivery at site And storage of 3 Core 4 Sq.mm water proof Flat submersible cable9 Make:Finoex/Havels/Polycab/approved make) 8 1.1KV grade 16 sq.mm 3.5 core XPLE Aluminium armoured Cable. 9 Supply,delivery and Storage of following valves,pipes and gadgets etc. at Site:(a) 80 mm Dia UPVC standards type coloumn pipe(cream Colour with both side threaded and one end side socket with register KPMG),Make : Ashirbad/Approve make of PHED 10 3 Mtr Long 11 1.5 mtr Long 12 80 Mm diaCi top and bottom adapter 13 Heavy type 250mm dia./suitable Split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design. 14 Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers. 15 50mm dia Non-Rising Spindle Suice valve9PN_1.0 rating) as perIS14846 for washout line,make:IVI/jupiter/Cair/approved make of PHED.Moc & TC Needed for valve 16 50 mm N.R.V(PN-1.0 rating) as per IS5312,Make:IVI/jupiter/Cair/approved make of PHED.Moc & TC Needed for valve 17 Anti snapping safety device for pump set by supplying suitable size of MS angle busket and nylon rope of required length includingsupplying of nuts, bolts and all other materials. 18 150 mm dial Pressure gauge [Range 0-7kg/cm²] with glycerine filling inside the dial including brass cock and fitting complete [This cost includes 15mm. dia G.I. pipes and specials]. 19 Making brick pillar 0.25x0.25x0.75 Mtr/suitable Height for supporting of valves and pipes with 12mm thick plaster and net cement finish complete. 20 Installation of Submersible Pumping machinery to newly sunk tubewells along with Coloumn pipe(as required),top cover,valves,Apecial of above protection pipe And supply of MS clamp,nut bolt,cable gland,sockets etc, making inter connection of the pump delivery line to pump collecting main line near tubewell with supply of all neccesary pipe,reducer/enlarger,GI/MS specials etc. including brick,sand,cement,rod Etc. and laying & drawing of all cable &cable protection pie as equired and all to complete the job including all connection & testing commisioninfg as per Direction of EIC 21 Instalation of above mentioned MCC panel by skilled Technical Person under Supervision & Guidance of manufacturer at their respective places by all the Neccesary material &equipments,after dismanting the old defective panel(if Any) and mending damages good of floor 22 Painting of installation(Viz, pumps,valves,pipe lines etc. by two coat epoxy paint(colour to be declare by EIC) over a coat of primer as per NIT specification and direction of EIC. 23 Hot dipped galvanized octagonal pole of following specification [ as per IS: 2629, ISO : 1461 Length:7Mtr , Top Dia : 70 mm, Bottom Dia : 130mm , Thickness – 3 mm, Base Plate : 200 mm x 200 mm x 12 mm sheet with 04 Nos M20 grade x 600mm EN -8 grade “ J “ type bolt. Bottom of the pole welded with base plate . Pole with base plate should comply as a shaft S355 as per BSEN 10025 Finishing : Hot dip galvanizedto BSENISO1461. The pole is also fitted with sword type single arm bracket made of light class 40 NB GI Pipe of 1 Mtr Length. The pole should be fitted with internal junction box at suitable height with suitable locking arrangement. The pole should withstand wind speed as per IS 857 [ PT –III 1987 ] Make: Calcutta Poles & Tubes Co./ Bajaj Electricals/ Any approved 24 Erection of Grp pole of length 7 Mtr in RCC Foundation of 400x400 mm Of depth of 1300 mm below the GL and 200 mm just above the GL. 4 Nos J type foundation bolt of 20 mm dia and 600mm long grounted into RCC foundation ,,There should be provision of 2 no of flexible pvc pipe of 63mm diafor cable entry as per supplied drawing and departmental drawing and design 25 100 watt road light luminaries with high powerLED and unique peanut lens to ensure uniform distribution, higher spacing between poles and maintenance free system, ideal for road width upto 8 Mtr.Make – Philips/ Havells/ Any other approved make(IP-65/ IP - 66) 26 Fitting fixing of above supplied Led light fitting complete with all accessories to vbe fixed with S&F length of 1.5sqmm PVC insulated single core stranded annealed copper wire and making connections as required complete 27 Earthing with 1 no of G.I earth spike(20mm dia X 1.5 mtr. Long) driven into the ground upto 2 mtr. Drawing earth ine with separate 6 SWG G.I Wires providing 15 mm dia. G.I pipe protection from earth spike feeder box/junction box/poles and fixing to the same suitable nuts 7 bolts all complete asper direction of EIC 28 Making earthing arrangement as per following 29 Excavation of soil for installation of Earth electrode and filling and ramming for soft soil. 30 Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long with TATA-Medium GI pipe with a provision to connect 25mm X 6mm GI flat strip complete with GI bolts, nuts, washers etc as required. 31 Connecting the equipments body to earth busbar including S&F 20mm X 3mm galvanized (Hot dip) MS flat on wall/floor with GI saddles as required and connection of equipments incld. drilling holes, with bolts, nuts, washers etc as required. 32 Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36cm X 86.36cm X 46cm deep (below ground level) complete with cemented brick work (1:6) of 25cm width duly plaster with cement morter (inside) CI hinged inspection cover of size 36.56cm X 35.56cm with locking arrangement, GI reducer including drilling of 46nos. 12mm dia holes on the GI pipe. 33 Extra treatment of soil by using salt and charcoal or coke for plate electrode. 34 Commisiong of the whole installation and testing by Licenced Electrician after drawing of power cable,fixing of Main switch as per instruction of EIC[N.B: (1)Drawing, design and make of the materials are to be approved from the EIC before procurement.] 35 Withdrawing of submersible pump set, columipe etc. from the tube well after disconnection of power line by derrick arrangement including supplying necessary Tools on hire basis and skilled labour as per direction of EIC. 36 Carrying charges of trolley mountedair compressor along with 225 BHP Diesel Engine set with oil tank hose pipe ETC. from Suri Drilling office to worksite by hired vehicle including driver, fuel and supporting personnel as per direction. 37 Lowering of the hose pipe up to 100 Mtr. from the tube well and connection of air compressor delivery pipe by engaging skilled personnel with tools and tackles as per direction of EIC. 38 Deployment of skilled personnel for operation and guarding of the trolley mountedair compressor along with 225 BHP Diesel Generator set as per direction. [2 Persons] 39 Running of 225 BHP diesel engineset including supply of diesel oil, lubricants and sundry materials etc for power supply ofair compressor of8hrs x 11 Nos. 40 Carrying back of trolley mountedair compressor along with 225 BHP Diesel Engine set with oil tank hose pipe ETC. fromto work site to another work site by hired vehicle including driver, fuel and supporting personnel as per direction. 41 Lowering of the existing withdrawn submersible pump motor set along with column pipe etc. by derrcik arrangement including supplying necessary Materials and tools on hire basis and skilled labour to complete the work as per direction of EIC. 42 Add: GST @ 18% on sum of Item No: 1 to 33 43 Add Cess @1% on sum of Item No. 34
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
22.
Civil Aviation #10363543 Price Bid
Tender For Water Tank Installation For Multipurpose Fire Tender At Bagdogra Airport.; 1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil. 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). 3 Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete. 4 Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers. 5 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore. 6 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level.Concrete of M25 grade with minimum cement content of 330 kg /cum. 7 Add for using extra cement in the items of design mix over and above the specified cement content therein. 8 Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer, including welding and bolted withspecial shaped washers etc. complete.Hot finished welded type tubes. 9 Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works. 10 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work50 mm dia nominal bore. 11 Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc.External work.80 mm dia nominal bore. 12 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore. 13 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore. 14 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints :80 mm diameter pipe. 15 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :50 mm nominal bore. 16 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :80 mm nominal bore. 17 Supply and installation of sovisy SMC / GRP panel water tank (size 5x4x3m) confirming to IS Code : 14399 (Part 1 & 2) : 1996 & IS Code : 4249 : 1967 with painted pedestal grillage and including carriage charges. (Specification attached) 18 Supply and installation of MS Water Tank Capacity 50,000 ltr confirming to relevent IS code with including carriage charge. (Specification attached) 19 Preparation of Structural design & drawing of 50,000 ltr Steel Water Tank including foundation details and bar bending schedule. Consultant will submit the vetted drawings and design by Govt. Engg. College/NIT/IIT in 3 (Three) Hard copies and 1 (one) soft copy.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 2
West Bengal View Result →
Maharashtra View Result →
24.
Public Administrative Department #10107980 Price Bid
Supply And Installation Of Surge Safety Equipment As Per The Recommendation Of Iit Indore -Excavation For Foundation , Trenches For Pipes / Cables , Cement Concrete , Cast Iron Double Air Valves , Grp Pipe , Etc
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Madhya Pradesh View Result →
Tamil Nadu View Result →
26.
New and Renewable Energy #9831532 Price Bid
Annual Rate Contract For Spares For Sandvik Make U/G Equipment. , Annual Rate Contract For Spares For Sandvik Make U/G Equipment. , Spool Part No-40365 , Accumulator Bottom Part No-100511 , Cylinder Part No-150152 , Seal Carrier Part No-150165 , Cover Part No-150322 , Pressure Control Valve Part No-150352 , Accumulator E64 Part No-300791 , Check Valve Housing Part No-300800 , Hose Assembly Part No-15228008 , Clamp, Hose Part No-28067890 , Clamp, Hose Part No-28067910 , Clamp, Hose Part No-36073270 , Washer Part No-42118130 / Af02300006 , Hexagon Socket Head Screw Part No-44580140 / Af00500446 , Hexagon Socket Set Screw Part No-44859320 / Af01000179 , Screw Part No-55003400 , Adapter Assembly Part No-55005676 , Screw Part No-55025463 , Washer, Spring Part No-55035148 , Indicator, Service Part No-55055782 / 89727009 , Screen For Oil Return Part No-55071759 / 85588619 , Suction Box Part No-55092697 / 55025465 , O-Ring Part No-55155074 / 89594469 , Hose Part No-55155201 / 89554999 , Screw Part No-55155437 , Gasketet Part No-55181317 / 55154616 , Adapter, Elbow Part No-55214080 , Screw Part No-55214107 , Adapter, Hydraulic Part No-80033099 / Af11140008 , Plug Part No-80468339 / Af11280004 , Hexagon Head Screw Part No-80880229 / Af00100322 , Disk Spring Part No-80880639 , Pressure Reducing Valve Part No-81079109 / 15393618 , Adapter, Hydraulic Part No-81318449 , Gasket Part No-81517459 / 9371813 , Washer, Lock, Double Part No-85128189 / Af03000030 , Washer, Lock, Double Part No-85128209 / Af03000031 , Pulley, V Belt Part No-85443119 , Elbow Part No-85883989 , Hydr.Hose Assembly Part No-86536849 , O-Ring Part No-87180799 / Af25010520 , Supporting Bushing Part No-89556479 / Bg00648570 , Screw, Hexagon Head, Full Thread Part No-Af00100133 , Screw, Hexagon Head, Full Thread Part No-Af00100328 , Screw, Hexagon Head, Full Thread Part No-Af00100736 , Screw, Hexagon Head, Full Thread Part No-Af00101125 , Screw, Hexagon Head, Partial Part No-Af00101225 , Screw, Set, Socket, Hexagon, Cup Pilot Part No-Af01000129 , Nut, Hexagon Part No-Af01400007 , Nut, Hexagon, Prevailing Torque Part No-Af01900004 , Washer, Plain, Normal Part No-Af02300005 , Washer, Lock, Pair Part No-Af03000030 , Washer, Lock, Pair Part No-Af03000034 , Screw Part No-Bg00213771 , Fitting Elbow Part No-Bg00245614 , Fitting Part No-Bg00245615 , Blow Down Valve Part No-Bg00271527 , Electric Motor, Three Phase Part No-Bg00322892 , Pulley Part No-Bg00323162 , Bushing Part No-Bg00323166 / Bg00323194 , Oil Filling Pluh Part No-Bg00323817 , O-Ring For Oil Separator Part No-Bg00323827 / 89624509 , Fitting With Screen For Oil Return Part No-Bg00323829 , Wing Nut Part No-Bg00323875 / 41162190 , O-Ring Part No-Bg00323876 / Af25010520 , Discharge Valve Net Part No-Bg00323883 , Seal, O-Ring Part No-Bg00323889 , Ring, Retaining Part No-Bg00323894 , Nut, Cap Part No-Bg00485062 , Seal Kit Part No-Bg00565968 , Flange Part No-Bg00614522 , Pocket, Sensor Part No-Bg00614737 , Filter Unit / Oil Filter Assembly Part No-Bg00614787 , Housing Part No-Bg00615518 , Cover, Front Part No-Bg00615523 , Fitting Part No-Bg00615527 , Plug Part No-Bg00615530 , Screw Part No-Bg00615890 , Hose Part No-Bg00627493 , Support Part No-Bg00632464 , Piston Part No-Bg00787332 , Bearing Part No-Bg00787343 , Bearing Part No-Bg00787673 , Gearbox Part No-Bg00788224 , Housing, Flushing Head Part No-Bg00790831 , Bushing, Bearing Part No-Bg00791171 , Bearing Assembly Part No-Bg00800728 , Bushing, Bearing Part No-Bg00800730 , Flushing Head Kit Part No-Bg00800865 , Seal Kit Complete Kit For Flushing Device Assembly Part No-Bg00800869 , Housing, Seal Part No-Bg00821314 , Distributor Part No-Bg00859794 , Cover, Rear Part No-Bg00859982 , Cylinder, Pilot Part No-Bg00862174 , Fan Part No-Bg00880156 , Housing Part No-Bg00882003 , Plate Part No-Bg00882013 , Plate, Cover Part No-Bg00882091 , Compressor Assembly Part No-Bg00882793 , Air End Part No-Bg00882931 , Seal, Rod Part No-Bg00917477 , Shaft, Rotating Part No-Bg00917593 , Seal, Rod Part No-Bg00917680 , Flushing Device Assembly Part No-Bg00920535 , Bearing Assembly Part No-Bg00923959 , Seal Kit Complete Seal Kit For Rdx5 Part No-Bg00928285 , Screw, Retainer Part No-Bg00928425 , Tool, Kit / Rdx5 Part No-Bg00967179 , Bearing Assembly Part No-Bg01127113 , Blow Down Valve Part No-Bg01129175 / Bg00271527 , Valve, Control Part No-Bg01129207 , Endurance Kit Part No-Bg01129537 , Percussion Kit Part No-Bg01130426 , Rotation Kit Part No-Bg01130465 , Body Kit Part No-Bg01130550 , Bolt Kit Part No-Bg01130566 , Seal Kit Part No-Bg01194761 , Plate, Side Part No-Bg01290737 , Bushing, Plain Shaft B Part No-3630 , Lock Nut Part No-90507 / Af01900010 , Lock Nut Part No-90519 / 845.0273-00 , Buffer Part No-300767 , Sleeve Part No-689390 , Damper Part No-714630 , Pin Part No-767720 , Connector Part No-822730 , Flange Part No-824820 , Flange Part No-824830 , Flange Part No-2697490 , Lever Part No-2795370 , Pipe Weldt Part No-2972590 / 515310 , Protection Sleeve Part No-3340308 , Screw Part No-3378238 , Plug Part No-3381178 , Belt Gear Part No-3383758 , Inlet Valve Part No-3388708 / Bg00616574 , Seal Kit Part No-3389010 , Seal Kit Part No-3389270 , Elbow Fitting Part No-3480868 , Oil Separator Part No-3582228 , Seal Part No-3598208 , Valve Part No-3603078 , Compressor Unit Part No-3965238 , Diaphragm. Part No-4114808 , Rubber Part No-4131278 , Reducer Part No-4144358 , Spring Part No-4144488 , Alternator Part No-4521029 , Seal Kit Part No-4602009 / 503808 , Check Valve Part No-4602010 / 77790850 , Inner Spring Part No-4694076 , Receptacle & Wire Assembly Part No-4694317 , Dust Cover Part No-4694322 , Clutch Drum Assy Part No-4695708 , Clutch Drum Assy Part No-4695716 / Bg00470042 , Gear Part No-4696240 , Piston Part No-4696260 , Lock Up & Modulator Valve Assembly Part No-4696526 , Sensor Part No-4696702 , Clutch Support&Plug Assembly Part No-4696853 / 4695706 , Mounting Screw Part No-4697223 , Bearing Single Row Radial Ball 72M Part No-4697637 , Spool Stop Spring Part No-4698595 , Cover Part No-4699250 , Baffle, Oil Part No-4699257 , Stator Support & Sleeve Assy Part No-4699262 , Bearing, Radial Ball Part No-4699265 , Support Part No-4699405 , Oring Part No-4699635 , Pump Drive Bushing Part No-4699818 , Hub, Turbine & Lock-Up Part No-4699873 , End Plug, Housing Part No-4700384 , Valve Part No-4700404 , Gasket Part No-4700461 , Sleeve, Tube Part No-4700532 , Bearing, Radial/Single Row Part No-4700569 , Cylindrical Roller Bearing S/Row Part No-4700584 , Shaft, Turbine Part No-4700609 , Shaft, Output Part No-4700617 , Inner Hub O-Ring Part No-4700734 , Element, Fuel Prefilter (Felt) Part No-4701242 / 69005108 , Element, Fuel Filter Part No-4701246 / 69005105 , Preheat Indicator Part No-4701392 / 74021036 , Seal Part No-4701419 , Pump Part No-4702908 , Screw Plug Part No-4732019 , Sealing Ring Part No-4732020 , O-Ring Part No-4732032 , Sealing Ring Part No-4732039 , Bleeding Socket Part No-4732040 , Bleeder Valve Part No-4732042 , Compression Spring Part No-4732043 , Compression Spring Part No-4732044 , Warning Label Was Dupl 69039050 Part No-4732047 , Pin Part No-4732048 , Screw Plug Part No-4732058 , Sealing Ring Part No-4732059 , Thrust Washer Part No-4732062 , Thrust Washer Part No-4732070 , Needle Bearing Part No-4732071 , Locking Pin Part No-4732073 , O-Ring Part No-4732078 , Screw Plug Part No-4732100 , Sealing Ring Part No-4732101 , Adjusting Nut Part No-4732112 , Rubber Cover Part No-4768968 , Valve, Magnetic Part No-4791340 / 56024134 , Plug Part No-4828688 , Seal Kit Part No-4900150 , Orbitrol-Control Part No-4900182 , Cap Part No-4910091 , Oil Filler Cap Part No-4910092 , Drain Cock Part No-4910150 , Anti-Slip Tape, Roll Part No-4910301 , Eye Piece Part No-4940268 , Ring Part No-4940418 , Valve Seat Part No-4973428 , Pin Part No-4973558 , Cover Part No-5410678 , Clamp Part No-6429006 , Clamp Part No-6429015 , Clamp Part No-6429016 , Clamp Part No-6429017 , Clamp Part No-6429114 , Clamp Part No-6429117 , Clamp Part No-6429204 , Fastener Part No-6429205 , Pipe Mounting Part No-6429424 , Slot Screw 4Mm X 10Mm Zp Part No-6538855 , Washer, Plain Part No-6581405 / Af02300003 , Washer, Plain Part No-6581412 / Af02300011 , Spring Washer Part No-6582409 , Lock Plate Part No-6587417 / 73390122 , Washer, Special Part No-6589470 / Af02400009 , Circlip 125 X 4 10.9 Part No-6590385 / Af20020087 , Led, Yellow Part No-8000051 , Led, Green Part No-8000062 , Bridge Part No-8000911 , Contact Part No-8001181 , Coolant Level Sensor Part No-8002325 / 56044552 , Fuse Part No-8003192 , Fuse Part No-8003196 , Fuse Part No-8003197 , Relay55005191 Part No-8003325 / 55005191 , Inductive Detector74203901part No-8501352 , Cap Part No-8537018 , End Cover Part No-8539988 , Seal Housing Part No-8540368 , Support Plate Part No-8540778 , Damping Adapter Part No-8543268 , Spring Part No-8543678 , Nozzle Part No-8559098 , Main Switch Part No-8900212 / 80071779 , Back Rest Part No-8900674 , Seat Foam Part No-8900676 , Handle/Cover Kit Part No-8900679 , Height Adj. Spring Kit Part No-8900680 , Dampner Kit Part No-8900682 , Stopper Kit Part No-8900683 , Weight Adjustment Part No-8900684 , Bearing Kit Part No-8900685 , Bellows Kit Part No-8900686 , Slide Rail Kit Part No-8900687 , Safety Belt Part No-8900715 , Gauge Part No-9030038 , Puller Part No-9034501 , Spindle Part No-9038958 , Distributor Part No-9044948 , Gauge Part No-9084548 , Diaphragm Part No-9260298 , Torque Wrench Set Part No-9333378 , Seal Part No-9373230 , Stand Part No-9517098 , Body Part No-9550318 , Stand Part No-9687658 , Connection Cable 16P Part No-10109952 , Pushbutton Box Assy Part No-10446962 , Terminal Box Part No-10614851 , Junction Box Assembly Part No-10615041 , Sleeve Part No-13446128 , Support Part No-13482506 , Seal Part No-15000878 , Chuck Part No-15021428 , Sleeve Part No-15021838 , Plug Part No-15022158 , Sleeve Part No-15022978 , Bearing Housing Part No-15025908 , Bushing Part No-15027638 , Tool Part No-15028808 , Tool Part No-15029098 , Tool Part No-15029118 , Housing Assy Part No-15034918 , Sleeve Part No-15039708 , Sleeve Part No-15039838 , Sleeve Part No-15052008 , Seal Rubber Part No-15053968 , Punch Part No-15054568 , Thrust Part No-15054698 , Punch Part No-15055168 , Hard Metal Pin Part No-15056178 , Seal Plate Part No-15057208 , Punch Part No-15067808 , Punch Part No-15067928 , Punch Part No-15068098 , Ring Part No-15068658 , Gage Part No-15074648 , Sleeve Part No-15074808 , Slide Washer Part No-15079718 , Thrust Button Part No-15080078 , Gasket Part No-15080918 , Plate Part No-15154858 , Coupling Part No-15175668 , Sleeve Part No-15177968 , Shaft Part No-15178158 , Shank Bushing Part No-15178308 , Tool Part No-15180648 , Gasket Part No-15181808 , Gasket Part No-15181938 , Handle Part No-15186608 , Tool Part No-15186728 , Gasket Part No-15191708 , Gear Housing Assy Part No-15193988 , Seal Part No-15198648 , Shaft Part No-15202408 , Tool Part No-15209878 , Seal Housing Part No-15210128 , Sleeve Part No-15216908 , Cover Part No-15217068 , Flushing Device Assembly Part No-15217901 , Punch Part No-15224888 , Punch Part No-15224908 , Socket Part No-15226238 , Rotation Bushing Part No-15233108 , Diaphragm Part No-15235798 , Shaft Assy Part No-15246038 , Seal Housing Part No-15247208 / Bg00928016 , Opener Part No-15250138 , Cap Nut Part No-15252568 , Plate Part No-15253858 , Gasket Plate Part No-15253988 , Distributor Part No-15257638 , Cap Nut (Replaces 15179608) Part No-15263888 , Tie Rod Part No-15263908 , Bushing Part No-15269708 , Bushing Part No-15271108 , Front Bushing Part No-15271508 , Stud Part No-15271638 , Chuck Part No-15272368 , Bearing Bushing Part No-15274408 , Front Cover Part No-15274538 , Shank Bushing Part No-15274798 , Gasket Part No-15274818 , Front Cylinder Part No-15366818 , Piston Part No-15366948 , Rear Cylinder Part No-15367138 , Distributor Part No-15367828 , Accumalator Assy (Uncharged) Lp Part No-15374678 , Accumulator Assy Uncharged Part No-15374708 , Cover Part No-15387218 , Filling Device Part No-15393618 , Low Press.Accumalator Part No-15404698 , Gear Wheel Part No-15419408 , Rotation Shaft Part No-15421748 , Spacer Assy Part No-15422198 , Body Part No-15476448 , Piston Part No-15500408 , Piston Part No-15502428 , Piston Part No-15504448 , Piston Part No-15516928 , Piston Part No-15532668 , Guide Band Part No-15532798 , Pin Part No-15545618 , Mounting Plate Part No-15699858 , Spacer Part No-15775908 , Orifice Piece Part No-15973618 , Spring Part No-16088638 , Cover Part No-16239508 , Cover Part No-16241708 , Piston Part No-16346508 , Shaft Part No-16396418 , Cover Part No-16608268 , Water Valve Part No-16818742 , Air Flushing Valve Part No-16818871 , Water Separator Part No-16943942 , Shaft Part No-20611688 , Warning Tipping Hazard Part No-20728968 , Warning Part No-20736978 , Plate Part No-20756808 , Orifice Adapter Part No-20781688 , Filling Pump Assy Part No-20784451 , Shim 8Mm Part No-20801958 , Limit Bushing Part No-20803437 , Shim 1 Mm Part No-20803568 , Flushing Valve Assy Part No-20824404 , Roller Part No-20829448 , Roller Part No-20829578 , Plate Part No-20830928 , Plate Part No-20831098 , Gasket Part No-20834148 , Dipstick Part No-20835288 , Stop Part No-20835308 , Plate Part No-20842978 , Lever Assambly Part No-20843858 , Mounting Plate Part No-20892628 , Lockscrew Part No-20902718 , Gauge Part No-23510368 , Pr Guage Set Part No-23512408 , Branch-T Part No-23542808 , Gauge Part No-23544538 , Gauge Part No-23544668 , Tool Part No-23924928 , Bushing Part No-26251208 , Jaw Part No-26393788 , Mounting Piece Part No-26417688 , Cylinder Assy Part No-26452778 , Cover Part No-26452808 , Jaw Part No-26452928 , Cover Part No-26482888 , Fill Cap Part No-26504898 , Pin Set Part No-26511761 , Cover Part No-26512518 , Valve Assy Part No-26522678 , Cover Plate Part No-26527188 , Pin Assy Part No-26562682 , Shaft Part No-26563308 , Botton Plate Part No-26563568 , Cover Part No-26567198 / 5410678 , Piston Part No-26598208 / Bg01521591 , Gasket Part No-28335660 , Collector Part No-28901298 , Distributor Part No-29901198 , Rear Bushing Part No-29901218 / 70180461 , High Pressure Accumulator Part No-29902358 , O-Ring Part No-30063710 , Piston Part No-30296908 / 55199140 , Hl510s-38 Omsu80 Part No-30385022 , Gasket Part No-30809658 / 55155077 , Orifice Socket Part No-30895408 / Bg00648561 , Orifice Sleeve Part No-30897558 , Bracket For Wheel Part No-32041708 , Mud Pipe Part No-32065408 , Cable Guide Part No-32093348 / Bg00312041 , Cylinder Part No-32121348 , Cover Part No-32121478 , Cable Guide Part No-32149788 , Top Piece Part No-32155088 , Inclination Gauge Part No-32156111 , Piston Rod Part No-32163248 , Support Part No-32173148 , Tf Feed512 Part No-32202158 , Cover Plate Part No-32219688 , Cover Part No-32219708 , Cover Part No-32265558 , Cylinder Tube Part No-32318558 , Piston Rod Part No-32318708 , Cylinder Tube Part No-32318838 , Cylinder Tube Part No-32319028 , Cylinder Tube Part No-32319308 , Piston Rod 50 Part No-32319438 , Piston Rod Part No-32319568 , Cylinder Tube Part No-32319698 , Cylinder Tube Part No-32319718 , Shaft Part No-32336908 , Idler Wheel Part No-32340568 , Hydr. Cylinder Part No-32357011 , Rear Frame Part No-32511638 , Valve Block Part No-32549978 , Control Bloc Part No-32552528 , Boom Control Valve (+Pito) Part No-32577658 , Oiler Kvl10-1 Part No-32654301 , Control Block Part No-32884148 , Control Bloc Part No-32885718 , Hydr.Cylinder Part No-32890398 , Hydr.Cylinder Part No-32890418 , Hydr.Cylinder Part No-32890547 , Hydr.Cylinder Part No-32890548 , Hydr.Cylinder Part No-32890678 , Hydr.Cylinder Part No-32890708 , Cylinder Part No-32890828 , Bushing Part No-33009948 , Band Part No-33012758 , Bracket Part No-33134178 , Bracket Part No-33143508 , Frame Part No-33143628 , Bushing Part No-33181618 , Plug Part No-33186408 , Guide Piece Part No-33191233 , Wear Bushing Part No-33211078 , Bushing Part No-33219328 , Body Part No-33276648 , Impulse Cylinder Part No-33276778 , Idler Wheel Part No-33277938 , Plate Part No-34466128 , Bearing Bushing Part No-34497528 , Piston Part No-34570238 , Flange Part No-34571091 , Flange Part No-34571092 , Wing Nut Part No-41162190 , Circlip Part No-42207230 / Af20010033 , Circlip Part No-42224130 / Af20020035 , Circlip Part No-42229200 / Af20020070 , O-Ring Part No-42870210 / Af25010499 , Socket Set Screw Part No-44817010 / Af01300270 , Lifting Eye Part No-44969770 / Af04100020 , Lifting Eye Part No-44970150 / Af04100023 , Spindle Part No-45378768 , Spring Part No-50077708 , Bearing Part No-51105310 / Bg00672477 , Deep Groove Bearing Part No-51110680 / Af21010188 , Deep Groove Ball Bearing Part No-51110830 / Af21010192 , Lock Nutrb Part No-51401020 / Af02200009 , Lock Nut Part No-51401430 / Af02200011 , Body Part No-51787978 , Control Valve Part No-51788033 , Contr.Non-Ret.Valve Part No-51788037 , O-Ring Part No-52203740 , O-Ring Part No-52205350 , O-Ring Part No-52205760 , O-Ring Part No-52206770 , O-Ring Part No-52207780 , O-Ring Part No-52209130 , O-Ring Part No-52209540 , O-Ring Part No-52210740 , O-Ring Part No-52211340 / Af25010479 , O-Ring Part No-52213100 , O-Ring Part No-52213490 / Af25010520 , O-Ring Part No-52214930 , O Ring Part No-52215120 , O-Ring Part No-52215380 , O-Ring Part No-52230000 / Af25011081 , O-Ring Part No-52248000 , Electric Component Assembly Part No-55000703 , Bearing Bushing Part No-55000762 , Control Valve Part No-55001016 , Drilling Control Block Part No-55001418 , Cylinder Part No-55001440 / 55085922 , Feed Cylinder Part No-55001441 / 55085907 , Cylinder Tube Part No-55001444 , Piston Rod Part No-55001446 , Control Block Assembly Part No-55001530 , Valve Assembly Part No-55001557 , Control Valve Part No-55001671 , Guide Part No-55001827 , Bushing Part No-55002318 , Metallic Locking Plug Part No-55002404 , Metallic Lock-Nut Part No-55002406 , Plug Part No-55003257 , Valve Assembly Part No-55003262 , Low Pr.Accumulater Part No-55003625 , High Pr.Accmulater Part No-55003627 , Metallic Lock-Nut Part No-55003800 , Metallic Lock-Nut Part No-55003802 , Metallic Lock-Nut Part No-55003803 , Metallic Cable Gland Part No-55003816 , Metallic Cable Gland Part No-55003818 , Metallic Cable Gland Part No-55003819 , Jaw Part No-55003891 , Jaw Part No-55003893 , Cylinder Part No-55004192 , Gasket Plate Part No-55004226 , Pressure Switch Part No-55004367 / 67014008 , Gasket Part No-55004625 , Cylinder Part No-55004784 , Sign,Boom Movement Part No-55005104 , Pin Part No-55005365 , Lock Screw Part No-55005452 , Punch Part No-55005480 , Punch Part No-55005494 , Punch Part No-55005557 , Punch Part No-55005568 , Punch Part No-55005588 , Punch Part No-55005617 , Rod Part No-55005618 , Punch Part No-55005620 , Frame Assy Part No-55005639 , Punch Part No-55005657 , Punch Part No-55005730 , Stand Part No-55005864 , Metallic Locking Plug Part No-55005990 , Metallic Locking Plug Part No-55005992 , Return Autom. Control Block Part No-55006491 , Stud Part No-55006590 , Special Tools Part No-55006739 , Mounting Support Part No-55006740 , Cable Entry Part No-55007608 , Metallic Cable Gland Part No-55008266 , O-Ring Part No-55009104 , O Ring Part No-55009105 , Plug Screw Part No-55009363 , Pin D40 Assy Part No-55009544 , Stopper Part No-55009884 , Punch Part No-55009924 , Punch Part No-55009931 , Bushing Part No-55010167 , Switching Bridge Part No-55010243 , Body Part No-55010331 , Punch Part No-55010396 , Support Part No-55012395 , Double Lock Washerrb Part No-55013058 / Af03000121 , Collecting Piece Part No-55014390 , Male Contactrb Part No-55014882 / 8002284 , Femalecontact Part No-55014883 , Connector Part No-55014920 , O-Ring Part No-55015217 , Cylinder Assembly Part No-55016852 , Circuit Breaker Part No-55018347 , Control Valve Part No-55019338 , Pump Part No-55020849 , Cover Lens Part No-55020889 , Wear Piece Part No-55021564 , Locking Pin Part No-55021573 , Accessories For Connector Part No-55022410 , Seal Kit For Rock Drill Part No-55025293 , Flange Part No-55025462 , Suction Tunnel Part No-55025465 , Connector Part No-55025466 , Check Valve77790830 Part No-55028797 , Slide Piece Part No-55028850 , Return Filter Part No-55029508 , Lever Part No-55030221 , Seal Part No-55033745 , Bearing Bushing Part No-55035604 , Plastic Enclosure Part No-55036581 , Clogging Indicator Part No-55037834 , Valve Assy Part No-55037835 , Water Separator Part No-55037836 / 81743959 , Wire Rope Return Part No-55038501 , Connector For Gauge Part No-55038599 , Piston Rod Part No-55038998 , Piston Rod 50 Part No-55039050 / 32319158 , Punch Part No-55039870 , Mounting Plate Part No-55040996 , Valve Assem Part No-55041159 , Flange Part No-55041659 , Rubber Cover Part No-55041836 , Terminal Strip Accessory Part No-55042562 , Punch Part No-55043536 , Punch Part No-55043537 , Flange Part No-55043965 , Alternator 77008742 Part No-55045836 , Wear Piece, 1 3/4 Part No-55046860 , Emergency Stop Button Part No-55047182 , Contact Block Part No-55047276 , Contact Block Part No-55047278 , Emergency Stop Button Part No-55047291 , Pilot Light Part No-55047551 , Led-Light Part No-55047577 , Selector Switch Part No-55047660 , Stainless Steel Enclosure Part No-55048431 , Directional Valve Part No-55048556 , Control Valve Assembly Part No-55048601 , Push Button Part No-55048816 , Selector Switch Part No-55049086 , Selector Switch Part No-55049092 , Repair Kit Part No-55049759 , Pressure Relief Valve Part No-55049760 , Seal Kit Part No-55049761 , Flow Control Valve Part No-55049764 , Seal Kit Part No-55049765 , Seal Kit Part No-55049767 , Check Valve Assembly Part No-55049770 , Pressure Compensator Part No-55049771 , Seal Kit Part No-55049772 , Seal Kit Part No-55049773 , Torque Wrench Part No-55050013 , Coupling Part No-55050828 , Cylinder Cover Part No-55054070 , Piston Rod Guide Ring Part No-55054600 , Wiper Part No-55054602 , Seal Part No-55054603 , Seal Kit (Bom In Texts) Part No-55055045 , Term. Element Part No-55055778 / 89560169 , Pressure Gauge Part No-55055783 / 89592989 , Rotating Bushing Part No-55057798 , Flex Plate Assy Part No-55064747 , Flex Plate Assy Part No-55065122 , Backing Plate Part No-55065133 , Slyd Ring Part No-55066836 , Control Air Piping Part No-55071769 , Pressure Gauge Connector 73803401 Part No-55078851 / Af11430005 , Cover Part No-55079564 , Housing, Belt Part No-55079566 , Thermostat Element Part No-55079946 / 37622208 , Regulator Part No-55084176 / 77794260 , Prioritet Valve Part No-55085201 / 88477789 , Gasket Part No-55085594 , Oil Glass Part No-55085596 , Piston Rod Part No-55085912 , Cylinder Tube Part No-55085916 , Bowl Part No-55086468 , Receiver Part No-55088402 / 88365729 , Pipe Part No-55095579 , Level Sight Indicator Part No-55096894 , Rubber Buffer Part No-55150127 , Mounting Plate Part No-55150159 , Tube, Cyclone Part No-55150557 , Seal Part No-55154614 , Mounting Piece Part No-55155027 , Support Part No-55155037 , Air Filter Part No-55155044 / 89726669 , Compressor,Tempest 3 Assembly Part No-55155210 , Body Part No-55155211 , Safety Valve Part No-55155215 / 89592299 , O-Ring Part No-55155216 , Motor Housing Part No-55155432 , Limiter Part No-55155433 , Fan Hub Part No-55155434 / 22326305 , Large Plain Washer Part No-55155447 , Oil Cooler Part No-55155449 / 30980578 , Seal Part No-55155450 , Cover Part No-55155452 , Wear Piece Part No-55174401 , Limit Bushing Part No-55194641 , Three-Phase Motor Part No-55198893 , Hydraulic Motor Part No-55205282 , Fuel Prefilter77008741 Part No-56006214 , Switch Gear Accessory Part No-56006491 , Accessories, Connector Part No-56016144 , O Ring Kit Part No-56030713 , Knob For Steering Wheel Part No-56039603 , Gasket Plate Part No-56040237 , Bushing Part No-59943148 , Brake Disc Part No-61445109 / 71081401 , Direct.Control Valve Part No-61481469 , Secondary Fuel Filter Element Part No-61507642 / 69040405 , Elbow Adapter Part No-62050460 , Socket Part No-62310480 , Brng Sphr Pln Shft Part No-64101552 , Bearing, Spherical Plain Shaft W/O H Part No-64101553 , Gasket Part No-64101666 , Pos.Batt.Terminal Part No-64105053 , Band Mounting, Air Cleaner Part No-64108451 , Seal, Grease Part No-64110237 , Elec. Starter-24V Part No-64117328 , Element-Filter Part No-64117540 , T-Bolt Clamp 4.31-4.63 Part No-64117577 , Filter Insert Part No-64117900 , Push Button-Illuminated Part No-64118298 , Amplifier Valve Part No-64131210 , Speed Sensor Connector Part No-64132025 , Solenoid Block - 24 Vdc, Elec Shift Part No-64132053 , Return Filter Part No-64132189 , Replacement Element Part No-64132198 , Bearing Radial Ball90 Mm Part No-64400206 / Af21010195 , Bearing Spherical Plain Shaft Part No-64400345 , Bearing, Spherical Plain Shaft W/O H Part No-64400346 , Socket Light Part No-64403025 , Jam Bolt, 1-8Unc Part No-64547622 , Pin Dump Cylinder Upper Part No-64548063 , Pin -Prop Tube, Lower Part No-64548734 , Parker Filter Element (64547162) Part No-64548737 , Pin - Upper Prop Tube, 522 Part No-64549053 , 8Mm Tube Assy, Trans Contl Part No-64550152 , 8Mm Tube Assy, Trans Contl Part No-64550153 , 8Mm Tube Assy, Trans Contl Part No-64550154 , 8Mm Tube Assy, Trans Contl Part No-64550155 , 8Mm Tube Assy, Trans Contl Part No-64550156 , 8Mm Tube Assy, Trans Contl Part No-64550157 , 10Mm Tube Assy, Trans Contl Part No-64550158 , 8Mm Tube Assy, Trans Contl Part No-64550159 , 10Mm Tube Assy, Lock-Up Drain Part No-64550216 , 10Mm Tube Assy, Lock-Up Pressure Part No-64550221 , Tube Assembly Part No-64551785 , Tube Assembly Part No-64551789 , Tube Assembly Part No-64551793 , Tube Assembly Part No-64551797 , Tube Assembly Part No-64551833 , Tube Assembly Part No-64551834 , Tube Assembly Part No-64551835 , Tube Assembly Part No-64552406 , Tube Assembly Part No-64552407 , Tube Assembly Part No-64552742 , Tube Assembly Part No-64552744 , Front Frame Tow Pin Part No-64553062 , Speedsensor, Hall Effect Part No-64559359 , Pressure Filter Assy 30P Part No-64560271 , Tube Assembly Part No-64569655 , Tube Assembly Part No-64569656 , Tube Assembly Part No-64569657 , Tube Assembly Part No-64569658 , Tube-Dump Valve Part No-64572131 , Tube-Dump Valve Part No-64572132 , Assy, Filler Pipe - Vented Part No-64572494 , Tube Assy-Brk Cooling Supply Part No-64574544 , Tube Assy-Brk Relay Vlv P.P. Part No-64574545 , Tube Assy-Brk Relay Vlv A Ln Part No-64574547 , 12Mm Tube Assembly Part No-64574619 , Tube Assy-Brk Relay Return Part No-64574620 , Tube Assy-Brk Cool Return Part No-64574621 , Tube Assembly Part No-64575195 , Tube Assembly Part No-64575196 , 10Mm Tube Assembly Part No-64575208 , 10Mm Tube Assembly Part No-64575209 , 10Mm Tube Assembly Part No-64575212 , 10Mm Tube Assembly Part No-64575213 , Tube Assembly Part No-64586467 , Tube Assembly Part No-64586481 , Tube Assembly Part No-64586485 , Tube Assembly Part No-64586790 , Tube Assembly Part No-64587110 , Fuel Filter/Water Separator Part No-64596638 , Tube Assy-Trans Cooler Rtn Part No-64603520 , Bearing, Self Aligning Part No-64803749 , Assy Kit Part No-66512918 / 88220109 , Key Switch Part No-66922530 , Bushing Part No-67009072 , Flash Part No-67011132 , Buzzer Part No-67011216 , Plug Part No-67014066 , Sheath Part No-67640963 , Bearing Radial Ball Part No-68050325 , Switch- Start/Stop Part No-68079308 , Switch Key Selector Part No-68079316 / 64132903 , Bearing Spherical Plain Shaft Part No-68117702 , Strainer Part No-69005201 , Element, Safety Part No-69008864 , Check Valve Part No-69034207 , Relief Valve Part No-69034216 / 4900226 , Throttle Check Valve Part No-69034228 , Sealing Ring Part No-69036306 / 77007210 , Fan Belt 77008743 Part No-69037934 , Breather Part No-69038045 , Brake Part No-69038466 , Inner Disk Part No-69038467 / 69040329 , Outer Disk Part No-69038468 / 69040330 , Gasket Part No-69038470 , Gasket Part No-69038471 , Face Seal Assy Part No-69038478 / Bg00955810 , Wheel Stud Part No-69038984 / 56213273 , Ring Part No-69038985 / 69040321 , Radial Seal Ring Part No-69038986 / 69040323 , Tapered Roller Bearing Part No-69038988 / 69040324 , Ring Part No-69038990 / 69040325 , O-Ring Part No-69038993 / 69040328 , Sun Gear Part No-69038995 , Ring Gear Carrier Part No-69039002 , O-Ring Part No-69039011 / 56031550 , O-Ring Part No-69039012 / 69040335 , Intermediate Piece Part No-69039017 / 69040338 , Piston Guide Ring Part No-69039018 / 69040339 , Tapered Roller Bearing Part No-69039037 / 69040389 , Bushing Part No-69039038 / 69040373 , Tapered Roller Bearing Part No-69039039 / 69040374 , Cover Part No-69039041 / 69040376 , Radial Seal Ring Part No-69039042 / 69040377 , Compensation Plate Part No-69039043 / 69040379 , Drive Flange Part No-69039044 / 69040380 , Bearing Part No-69039045 , O-Ring Part No-69039049 / 69040385 , Oring Part No-69039051 , Bevel Wheel Set Part No-69039944 , Axle Shaft Part No-69040318 , Diff Spider Part No-69040354 , Diff Pinion Part No-69040356 , Thrust Washer Part No-69040357 , Thrust Washer Part No-69040358 , Bushing Part No-69040359 / 69040356 , Circlip Part No-69040382 , Circlip Part No-69040383 , Fuel/Water Separator Element Part No-69041466 / 55051165 , Planetary Gear Drive Part No-69043482 / Bg00607240 , Pin Part No-70011773 , Pin Part No-70012023 , Pin Part No-70012133 , Pin Part No-70012171 , Pin Part No-70012173 , Pin Part No-70012210 , Pin Part No-70012228 , Pin Part No-70012231 , Pin Part No-70012232 , Pin Part No-70012235 , Pin Part No-70012245 , Pin Part No-70012257 , Pin Part No-70012271 , Pin Part No-70012272 , Pin Part No-70012277 , Pin Part No-70012294 , Pin Part No-70012295 , Pin Part No-70012296 , Pin Part No-70012297 , Pin Part No-70012299 , Pin Part No-70012330 , Pin Part No-70012332 , Gear Part No-70070682 , Gear Part No-70070688 / 78401170 , Gear Part No-70070703 , Chain Pinion Part No-70090393 , Chain Pinion Part No-70090394 , Piston Part No-70130095 , Piston Part No-70130120 , Segment Part No-70160033 , Valve Part No-70160037 , Bushing Part No-70180409 , Sleeve Part No-70180411 , Bushing Part No-70180412 , Bushing Part No-70180413 , Bushing Part No-70180419 , Bushing Part No-70180431 , Sleeve Part No-70180436 , Bushing Part No-70180440 , Sleeve Part No-70180448 , Sleeve Part No-70180449 , Ring Part No-70212436 , Bushing Part No-70212517 , Bushing Part No-70212573 , Sleeve Part No-70212586 , Sleeve Part No-70212607 , Bushing Part No-70212635 , Bushing Part No-70212638 , Bushing Part No-70212653 , Bushing Part No-70212654 , Bushing Part No-70212665 , Bushing Part No-70212674 , Bushing Part No-70212678 , Bushing Part No-70212681 , Bushing Part No-70212688 , Coupling Part No-70220761 , Coupling Sleeve Part No-70220780 , Drive Chuck Part No-70220787 , Pulley Part No-70250477 , Bushing Part No-70260742 , Bushing Part No-70260754 , Bushing Part No-70260755 , Bushing Part No-70260780 , Bushing Part No-70260781 , Shank Protector Part No-70271115 , Protector Part No-70271200 , Protector Part No-70271331 , Plug Part No-70281050 , Plug Part No-70281122 , Plug Part No-70281152 , Plug Part No-70281155 , Cover Part No-70281181 , Cover Part No-70281214 , Body Part No-70290444 , Drum Part No-70310036 , Frlange Check Part No-70350326 , Accumulator Cover Part No-70350327 , Flange Part No-70361440 , Frlange Fror Motor Part No-70361446 , Flange Part No-70361496 , Flange Part No-70361513 , Frlange Part No-70361544 , Rear Flange Part No-70361550 , Flange Part No-70361637 , Rear Flange Part No-70361772 , Flange Part No-70361808 , Spacer Part No-70391147 , Spacer Part No-70391155 , Washer Kit Part No-70391192 , Retainer Ring Part No-70400028 , Seal Part No-70410301 , Seal Part No-70410310 , Seal Part No-70410311 , Dust Seal Part No-70410317 , Seal Part No-70410319 , Seal Part No-70410320 , Seal Part No-70410326 , Stop Part No-70420416 , Stop Part No-70420507 , Shim Part No-70430511 , Shim Part No-70430512 , Shim Part No-70430513 , Shim Part No-70430530 , Shim Part No-70430531 , Skid Part No-70450658 , Skid Part No-70450662 , Skid Part No-70450663 , Skid Part No-70450670 , Skid Part No-70450671 , Guide Part No-70460765 , Plate Part No-70534232 , Plate Part No-70534233 , Plate Part No-70534382 , Plate Part No-70534414 , Yoke Part No-70541265 , Yoke Part No-70541309 , Yoke Part No-70541313 , Tenon Part No-70560453 , Bracket Part No-70593845 , Support Part No-70593846 , Support Part No-70594433 , Centralizer Support Part No-70594437 , Cradle Support Part No-70594439 , Support Part No-70594813 , Yoke Support Part No-70595179 , Support Part No-70595367 , Exhaust Support Part No-70595422 , Tie Rod Part No-70620848 , Spanner Part No-70650137 , Spanner Part No-70650148 , Spanner Part No-70650149 , Dowel Part No-70720174 , Dowel Part No-70720203 , Stud Part No-70730177 , Stud Part No-70730199 , Stride Part No-70750034 , Check Valve Part No-70770039 , Valve Seat Part No-70790090 , Union Part No-70801048 , Union Part No-70801055 , Union Part No-70801093 , Union Part No-70801166 , Union Part No-70801187 , Union Part No-70801190 , Union Part No-70801192 , Union Part No-70801243 , Pipe Part No-70821125 , Tube Part No-70821261 , Air Intake Hose Part No-70821269 , Tube Part No-70821270 , Exhaust Pipe Part No-70821277 , Spring Part No-70880071 , Spring Part No-70880239 , Hook Part No-70930034 , Cable Clamp Part No-70930035 , Decal Part No-70960062 , Decal Part No-70960063 , Decal Part No-70960081 , Decal Part No-70960241 , Decal Part No-70960288 , Decal Part No-70960289 , Decal Part No-70960435 , Decal Part No-70960471 , Decal Part No-70960474 , Decal Part No-70960479 , Decal Part No-70961771 / 55214360 , Decal Part No-70961828 , Decal Part No-70961829 , Decal Part No-70961832 , Decal Part No-70961847 , Decal Part No-70961852 , Decal Part No-70961870 , Decal Part No-70961943 , Decal Part No-70961944 , Valve Part No-71010158 , Air Regulator Part No-71010219 , Brush Holder Part No-71020870 , Brush Holder Part No-71020871 , Collector Part No-71020901 / 71020829 , Collector Part No-71020902 , Ring Kit Part No-71020930 , Ring Assy Part No-71020931 , Plug Part No-71021004 , Swing Crown Wheel Part No-71036002 , Shaft + Bolts Part No-71055030 , Flange Part No-71055032 , Pressure Acumulators Part No-71055042 / Bg00866509 , Wheel Nut Part No-71055050 , Stud Part No-71055060 / 77007645 , Flange Part No-71055070 , Bevel Gear Part No-71055080 , Flexor Part No-71062081 , Drop Gear Part No-71081093 , Seal Part No-71081554 / 61502189 , Cooler Part No-71160701 , Seal Kit Part No-71160750 , Cover Kit Part No-71160751 , Half-Bushing Part No-71190635 , U Joint Part No-71190790 , U Joint Part No-71190812 , Switch Part No-71191220 , Seal Part No-71191253 , Key Switch Part No-71191275 , Electric Stop Part No-71192300 , Solenoid Valve Part No-71192350 , Oil Filter Part No-71194347 , Ring Part No-71194832 , Union Part No-71194833 , Socket Part No-71194845 , Fuel Filter Part No-71195003 / 81849359 , Fuel Filter Part No-71198830 / 88065679 , Alternator Part No-71198831 , Belt Part No-71198832 , Belt Tensioner Part No-71198833 , Oil Filter Part No-71198836 , Starter 77008745 Part No-71198847 , Oil Pressure Transmitter Part No-71198849 , Base Part No-71199081 , Coupling Sleeve Part No-71199791 , Throttle Cable Part No-71210405 , Bushing Part No-71402470 , Ball Joint Part No-71407140 , Knee Joint Fitting Part No-71407192 , End Piece Part No-71407430 , Ball Joint Part No-71407440 , Ball Joint Part No-71407550 , Ball Joint Part No-71407560 , Ball Joint Part No-71407580 , Bearing Part No-71503304 , Bearing Part No-71546206 , Tappered Roller Bearing Part No-71923310 , Stainless Steel Tube Part No-72203476 , Steel Pipe Part No-72205003 , Threaded Rod Part No-72207056 , Blocking Taper Part No-73060150 , Blocking Taper Part No-73060155 , Blocking Taper Part No-73060160 , Blocking Taper Part No-73060170 , Blocking Taper Part No-73060185 , Wheel Assembly Part No-73101198 , Rim Part No-73101556 , Rim Part No-73101567 , Ball Valve Part No-73150204 , Ball Valve Part No-73150226 , Ball Valve Part No-73150514 , Flow Controler Part No-73153300 , Flow Controler Part No-73153301 , Electric Parts Set Part No-73153350 , Ring Part No-73213055 , Coupling Part No-73225511 / 78402200 , Coupling Part No-73225700 , Coupling Part No-73225701 , Coupling Part No-73225703 , Flange Check Part No-73225750 / 77025580 , Coupling Part No-73226008 , Plug Part No-73280265 , Plug Part No-73281026 , Plug Part No-73282501 , Plug Part No-73282503 , Plug Part No-73282505 , Plug Part No-73282506 , Plug Part No-73282507 , Plug Part No-73283231 , Plug Part No-73283232 , Plug Part No-73283235 / 432399004 , Plug Part No-73284101 , Plug Part No-73284102 , Plug Part No-73284103 / Af11050006 , Plug Part No-73284104 , Plug Part No-73288003 , Gauge Part No-73331004 , Gauge Part No-73331009 , Gauge Part No-73331014 , Gauge Part No-73331022 , Flange Part No-73360511 , Bracket Part No-73360512 , Frlange Part No-73360517 , Flange Part No-73360518 , Flange Part No-73360521 , Flange Fitting Part No-73360915 , Flange Part No-73361002 , Flange Part No-73361004 , Ball Part No-73370510 , Circlip Part No-73400162 , Circlip Part No-73400205 , Ring Part No-73403338 , Seal Part No-73411111 , Seal Part No-73411116 , Seal Part No-73411131 , Seal Part No-73411212 , Seal Part No-73411217 , Seal Ring Part No-73411616 , Seal Ring Part No-73411704 , Seal Ring Part No-73411716 , Seal Ring Part No-73411728 , Ring Part No-73411732 , Seal Part No-73411832 , Seal Part No-73412955 , Seal Part No-73412965 , Seal Part No-73412980 / 518790 , Seal Part No-73413214 , Seal Part No-73413222 , Seal Part No-73413224 , Seal Part No-73413290 , Seal Part No-73413544 , O Ring Part No-73414092 , Ring Part No-73414156 , O Ring Part No-73414176 , O Ring Part No-73414202 , O Ring Part No-73414216 , O Ring Part No-73414232 , O Ring Part No-73414236 , O Ring Part No-73414272 , O Ring Part No-73414368 , O Ring Part No-73414440 , O Ring Part No-73414458 , O Ring Part No-73414588 , O Ring Part No-73414612 , O Ring Part No-73414672 , O-Ring Part No-73414688 , O Ring Part No-73414712 , O Ring Part No-73414714 , O Ring Part No-73414834 , O Ring Part No-73415018 , O Ring Part No-73415030 , O Ring Part No-73415044 , O Ring Part No-73415050 , O Ring Part No-73415058 , O Ring Part No-73415060 , O Ring Part No-73415066 , O Ring Part No-73415078 , O Ring Part No-73415088 , Bushing Part No-73415154 , Bushing Part No-73415168 , O Ring Part No-73415170 , Bushing Part No-73415448 , O-Ring Part No-73415480 , Seal Part No-73417234 , Seal Part No-73417256 , Seal Kit Part No-73417510 , Seal Kit Part No-73417520 , Backup Ring Part No-73418726 , Backup Ring Part No-73418727 , Backup Ring Part No-73418728 , Seal Part No-73418750 , O Ring Part No-73418773 , Seal Kit Part No-73418781 / 73418780 , Repair Kit Part No-73418782 / Bg01013589 , Seal Part No-73419310 , Seal Part No-73419312 , Seal Part No-73419314 , Rod Seal Part No-73419757 , Piston Seal Part No-73419761 , Rod Seal Part No-73419914 , Seal Part No-73419950 , Seal Part No-73419951 , Decal Part No-73530352 , Yoke Assy Part No-73540406 , Hinge Part No-73551001 , Fastener Part No-73551100 , Spanner Ll = 160 Mm Part No-73650716 , Pin Part No-73730180 , Pin Part No-73730254 , Elastic Pin Part No-73730258 , Pin Part No-73732015 , Pin Part No-73732158 , Ribbed Pin Part No-73732578 , Pin Part No-73735858 , Pin Part No-73735916 , Pin Part No-73735992 , Pin Part No-73736026 , Safety Valve Part No-73770106 , Safety Valve Part No-73770108 , Press.Reducing Valve Part No-73770151 , Press.Reducing Valve Part No-73770152 , Caliper Part No-73770192 , Spring Part No-73770193 , Check Valve Part No-73770304 , Screen Part No-73772000 , Jet Part No-73800203 , Jet Part No-73800206 , Jet Part No-73800210 , Jet Part No-73800238 , Jet Part No-73800248 , Tee Part No-73802758 , Elbow Part No-73802835 , Union Part No-73804034 , Reducer Part No-73804184 , Hand Pump Part No-73804204 , Union Part No-73806506 , Plug + Small Chain Part No-73806536 , Union Part No-73806551 , Long Straight Fitting Part No-73808408 , Union Part No-73809203 , Union Part No-73809891 , Collar Part No-73810103 , Collar Part No-73810107 , Collar Part No-73810109 , Collar Part No-73810128 , Detachable Link Part No-73810552 , Chain Part No-73810562 , Chain (Box Of 5 M) Part No-73812021 , Chain (Box Of 5 M) Part No-73812023 , Link Part No-73812101 , Link Part No-73812114 , Strap Part No-73812778 , Collar Part No-73813352 , Strap Part No-73813354 , Collar Part No-73813356 , Strap Part No-73814170 , Strap Part No-73814190 , Spiral Sheath (Box Of 5 M) Part No-73821211 / 15574978 , Spiral Sheath (Box Of 5 M) Part No-73821225 / 15574978 , Air Hose Part No-73824802 , Water Filter Part No-73830913 , Water Filter Part No-73830960 , Strainer Part No-73830991 / Bg00871972 , Breather Part No-73831002 , Filter Part No-73831130 , Safety Cartridge Part No-73831153 / 4710050 , Air Filter Part No-73831155 , Percussion Filter Part No-73832443 , Filter Element Part No-73833257 , Sight Indicator Part No-73833300 , Level Part No-73833303 , Electric Level Part No-73833304 , Suspension Part No-73880110 , Contact Part No-73880133 , Support Part No-73880139 , Spring Part No-73882402 , Wire Rope Part No-73930812 , Working Light Part No-74011221 , Master Switch Part No-74011320 , Alternator Part No-74021042 , Regulator Part No-74021064 , Relay Part No-74021071 , Relay Part No-74021082 , Clogging Indicator Part No-74022005 , Switch Part No-74030100 , Electric Motor Part No-74031842 , Electric Cable Part No-74032061 , Brass Plug Part No-74032502 , Lock Nut Part No-74032568 , Reducer Part No-74032610 , Amplifier Part No-74032670 , Electric Cable Part No-74034350 , Wire Part No-74034363 , Wire Part No-74034371 , Overload Relay Part No-74036202 , Sheath Part No-74038311 , Cap Part No-74038321 , Seal Part No-74038341 , Coupling Part No-74038361 , Overload Relay Part No-74041002 , Overload Relay Part No-74041005 , Socket For Overload Relay Part No-74041021 , Transformer Part No-74060226 , Hood Part No-74081020 , Joy Stick Part No-74082000 , Overload Relay Part No-74131540 , Overload Relay Part No-74131542 , Overload Relay Part No-74131546 , Relay Part No-74131580 , Ring Part No-74131591 , Plate Part No-74165000 , Stop Part No-74165001 , Terminal Block Part No-74165007 , Relay Module Part No-74165014 , Terminal Block Part No-74165019 , Connection Terminal Part No-74165020 , Connector Part No-74165021 , Connection Terminal Part No-74165025 , Diode Part No-74165027 , Relay Part No-74165028 , Connecting Block Part No-74165060 , Plate Part No-74165070 , Switch Part No-74165081 , Switch Part No-74165082 , Rail Adaptor Part No-74165090 , Connector Part No-74165091 , Connector Part No-74165092 , Plate Part No-74165094 , Resistance Part No-74184033 , Buzzer Part No-74185010 , Feed Chute Part No-74190970 , Feed Chute Part No-74190971 , Breather Part No-74191320 , Capacitor Part No-74196002 , Diode Part No-74196052 , Gland Part No-74196130 , Wire Rope Part No-74196176 / 77017554 , Wire Rope Part No-74196177 , Relay Part No-74196180 , Sheath Part No-74196192 , Sheath Part No-74196193 , Switch Part No-74196290 , Hood Part No-74196417 , Base Plate Part No-74196426 , Base Plate Part No-74196427 , Male Plug Part No-74196433 , Male Plug Part No-74196434 , Male Plug Part No-74196439 , Female Plug Part No-74196443 , Female Plug Part No-74196444 , Female Plug Part No-74196445 , Female Plug Part No-74196449 , Female Support Part No-74196492 , Union Part No-74196511 , Male Plug Part No-74196581 , Male Plug Part No-74196582 , Spindle Part No-74196600 , Socket Part No-74196601 , Electric Cable Part No-74196610 , Gland Part No-74196642 , Connector Part No-74196650 , Support Part No-74200598 , Signalling Lamp Part No-74200940 , Signalling Lamp Part No-74200941 , Signalling Lamp Part No-74200945 , Push Button Part No-74201005 , Push Button Part No-74201009 / 77015993 , Push Button Part No-74201013 , Plug Part No-74201021 , Commutator Head Part No-74201083 , Switch Part No-74201132 / 77015987 , Switch Part No-74201133 / 77015989 , Switch Part No-74201144 / 77015990 , Guard Part No-74201163 / 77015995 , End Piece,Cable Part No-74201337 , End Piece,Cable Part No-74201339 , Profile Dinomega Part No-74201396 , Switch Block Part No-74201541 , Switch Block Part No-74201542 , Block Part No-74201610 , Block Part No-74201611 / 77005794 , Contactor Part No-74201620 / 527701009 , Relay Part No-74201675 , Relay Part No-74201688 , Contactor Part No-74201690 , Contactor Part No-74201691 , Contactor Part No-74201692 , Relay Part No-74201730 , Overload Relay Part No-74202230 , Overload Relay Part No-74202231 , Switch Block Part No-74202262 , Block Part No-74202271 , Union Brush Part No-74202272 , Relay Part No-74202280 , Relay Part No-74202282 , Contactor Part No-74202291 , Contactor Part No-74202292 , Connector Part No-74203950 , Switch Part No-74205102 , Gauge Part No-74830100 , Gauge Part No-74830111 / 77006417 , Pin Part No-75013163 , Piston Part No-75133143 , Piston Part No-75133158 , Piston Part No-75133159 , Bushing Part No-75212024 , Ring Part No-75212042 , Hood Part No-75272001 , Hood Part No-75272002 , Bushing Part No-75462032 , Guide Part No-75463235 , Guide Part No-75463238 , Plate Part No-75532011 , Rod Part No-75622178 , Rod Part No-75622243 , Rod Part No-75622294 , Rod Part No-75622296 , Rod Part No-75625377 , Rod Part No-75625381 , Rod Part No-75625388 , Spacer Part No-75900061 , Joy Stick Part No-76070005 , Protector Part No-76130139 , Seal Kit Part No-76130162 , Kit Part No-76130168 , Control Valve Part No-76130169 , Cylinder Ni/Chromium Part No-76310086 , Hydraulic Cylinder Ni/Chromium Part No-76310091 , Cylinder Part No-76310098 , Cylinder Part No-76315506 , Cylinder Part No-76315601 , Cylinder Part No-76318069 , Cylinder Part No-76318072 , Ball Part No-76650100 , Lever Rod Part No-76711213 , Check Valve Part No-76771790 , Control Valve Part No-77005027 , Control Valve Part No-77005036 , Gear Part No-77005187 , Lever Box Part No-77005401 , Valve Section Part No-77005542 , Lever Part No-77005543 , Relief Valve Part No-77005544 , Seal Kit Part No-77005546 , Spring Return Kit Part No-77005547 , Valve Section Part No-77005560 , Pressure Valve Part No-77005563 , Solenoid Part No-77005581 , Control Panel 77012426 Part No-77005613 , Prewire Connector Part No-77005681 , Coil Part No-77005771 , Main Switch Pin Part No-77005772 , Power Relay Part No-77005785 , Lock Device Part No-77005789 , Female Connector Part No-77005951 , Coupling Part No-77006025 , Water Pump Part No-77006073 / Bg00864184 , Water Pump Group Part No-77006074 , Pin Part Set Part No-77006076 , Repair Kit Part No-77006108 , Water Pump Spare Kit Part No-77006109 / 55042408 , Water Pump Spare Kit Part No-77006112 , Relay Part No-77006154 , Dampening Piston Part No-77006326 , Fuel Gauge Part No-77006416 / Bg01745234 , Protector Part No-77006473 , Shaft Seal Part No-77006481 , Ring Part No-77006482 , Hub Oscillating Axle Part No-77006483 , Special Nut Part No-77006487 , Axle Housing Part No-77006535 , Housing Part No-77006536 , Housing Part No-77006537 , Disc Assy Part No-77006538 , Disc Intermediate Part No-77006539 , Disc Assy Part No-77006540 , Ball/Roller Part No-77006542 , Spring Part No-77006543 , Pin Cotter 1/8X 1 Part No-77006546 , Seal Assy Part No-77006548 , Water Pump Impeller Part No-77006825 , Seal Kit Part No-77007011 , Air Filter Assy Part No-77007054 , Air Filter Part No-77007055 , Safety Cartridge Part No-77007056 , Bracket Assy Part No-77007058 , Turbo Kit Part No-77007206 , Gasket Part No-77007208 , Seal Part No-77007209 , O-Ring Part No-77007211 , O-Ring Part No-77007212 , Stud Part No-77007217 , Brake Control Rod Part No-77007220 , Plug Part No-77007221 , Planet Gear Part No-77007222 , Bearing Cup Part No-77007223 , O-Ring Part No-77007224 , Stud Part No-77007225 , Bearing Taper Part No-77007228 , Bearing Cage Part No-77007233 , Bearing Cup Part No-77007234 , Shaft Part No-77007235 , Gear Part No-77007236 , Shaft Part No-77007240 , Bearing Cup Part No-77007242 , Bearing Cup Part No-77007243 , Bearing Cage Part No-77007244 , Bearing Cage Part No-77007245 , Ball Bearing Part No-77007258 , Bearing Cup Part No-77007259 , O-Ring Part No-77007263 , Bearing Taper Part No-77007264 , Spring Part No-77007269 , Spring Part No-77007278 , Plug Part No-77007290 , Spring Part No-77007302 , Plug Part No-77007304 , Collar Part No-77007305 , Bearing Taper*Pls See T-Text* Part No-77007319 , Bearing Cage Part No-77007320 , Plug Part No-77007323 , Shim Part No-77007324 , Backing Ring Part No-77007329 , Pin Part No-77007330 , Shim Part No-77007331 , Differential Cross Part No-77007335 , Snap Ring Part No-77007336 , Backing Ring Part No-77007337 , Shim Part No-77007340 , No-Spin Part No-77007341 , Drilling Cradle Part No-77007357 , Cradle Part No-77007375 , Traming Control Block Part No-77007555 , Shuttle Valve Part No-77007556 , Pilot Control Valve Part No-77007557 , Pilot Control Valve Part No-77007558 , Solenoid Part No-77007561 , Solenoid Part No-77007562 , Seal Kit Part No-77007563 / 56012010 , Seal Kit Part No-77007564 / 56012010 , Seal Kit Part No-77007565 , Seal Kit Part No-77007574 , Gear Part No-77007680 , Gear Part No-77007684 , Support Part No-77007728 , Support Part No-77007729 , Decal Part No-77007842 , Braking Block Part No-77007935 , Seal Kit Part No-77007951 , Ball Bearing Part No-77008141 , Spacer Part No-77008150 , Ball Bearing Part No-77008154 , O-Ring Part No-77008160 , Nut Part No-77008162 , Seal Part No-77008164 , Spacer Part No-77008170 , Water Hose Part No-77008395 , Mounting Support Part No-77008458 , Gear Pump Part No-77008463 / 77022413 , Radiator Core Part No-77008724 , Shock Absorber (Set Of 4 Pcs) Part No-77008726 , Tensioner Part No-77008744 , Fuel Hose Part No-77009057 , Pin Part No-77009393 , Signal Resistor Part No-77009422 , Gear Pump Part No-77009694 , Bushing Part No-77009697 , Seal Part No-77009698 , Clevis Pin Part No-77010355 , Discs Kit Part No-77010896 , Bearing Part No-77010897 , Female Multipole Connector Part No-77010959 , Speed Up Pedal Part No-77010961 , Filter Hp Part No-77011121 , Filter Element Part No-77011123 , Clogging Indicator Part No-77011409 , Pipe Part No-77011464 , Breather Part No-77011541 / Bt00016118 , Switch Part No-77011633 , Fuel Gauge Part No-77011777 , Exhaust Pipe Part No-77011964 , Relay Part No-77012116 , Flash Light Part No-77012289 , Red Patch Part No-77012359 , Decal Part No-77012360 , Push Button Part No-77012373 , Timer Part No-77012387 , Fuse (Box Of 100 Pcs) Part No-77012392 , Fuse (Box Of 100 Pcs) Part No-77012393 , Fuse (Box Of 100 Pcs) Part No-77012394 , Diode Part No-77012395 , Flash Light 24Vdc Part No-77012538 , Control Assembly Part No-77012789 , Cooler Part No-77012838 / 77761100 , Cooler Housing Part No-77012886 , Radiator Part No-77012887 , Fan Guard Part No-77012888 , Fan Part No-77012889 , Seat Part No-77013044 / 77013984 , Connector Deutz 10 Pins Part No-77014359 , Flat Belt Part No-77014803 , Breather Part No-77015769 , Push Button Part No-77015991 / 74201004 , Push Button Part No-77015992 / 74201006 , Pressure Button Part No-77015998 / 74201086 , Gear Pump Part No-77017417 , Seal Kit Part No-77017602 , Relay Part No-77021759 , Coil Part No-77650181 , Control Valve Part No-77650340 / 77016199 , Control Valve Part No-77650351 / Bt00004012 , Control Valve Part No-77650360 , Pump Part No-77720050 , Hyd. Pump.16Cm3/T Part No-77720322 / Bg01041442 , Manual Pump Part No-77720325 , Copper Seal Part No-77720642 , Flow Divider Part No-77722056 , Spring Part No-77722149 / 77722084 , Seal Kit Part No-77722590 , Seal Kit Part No-77722591 , Seal Kit Part No-77722592 , Body Part No-77722700 , Body Part No-77722704 , Cover Part No-77722850 , Hydraulic Pump Part No-77724200 , Hydraulic Motor Part No-77724251 , Solenoid Coil Part No-77724305 , Plate Part No-77724306 , Hydraulic Control Part No-77724324 , Valve Part No-77724327 , Double Check Valve Part No-77728701 / Bt00003001 , Double Check Valve Part No-77728702 / Bg01013589 , Check Valve Part No-77728705 , Valve,Check Part No-77728871 , Check Valve Part No-77728872 , Check Valve Part No-77728873 , Check Valve Part No-77728901 , Flow Regulator Part No-77728910 , Regulator Part No-77729051 , Selector Part No-77729300 , Check Valve Part No-77729800 , Uncharged Accumulator Part No-77750111 , Diaphragm Part No-77750262 , Seal Kit Part No-77750266 / 77750111 , Hydraulic Motor Part No-77750656 , Steering Column Part No-77750660 , Hydraulic Motor Part No-77750668 , Hydraulic Motor Part No-77750675 , Control Valve Part No-77750912 , Hydraulic Pump Part No-77760518 , Wheel Motor Part No-77760549 , Wheel Motor Part No-77760557 , Check Valve Part No-77760601 , Seal Kit Part No-77760681 , Pump Kit Part No-77760690 , Inching Pedal Part No-77760713 , Set Of 10 Nuts Part No-77760777 , Seal Kit Part No-77760778 , Set Of 10 Studs Part No-77760779 , Brake Part No-77760792 , Brake Kit Part No-77760793 , Seal Kit Part No-77760794 , Hydraulic Motor Part No-77761151 , Propeller Part No-77761152 , Hydraulic Pump Part No-77790014 , Hydraulic Motor Part No-77790052 , Seal Kit Part No-77790080 / 665514006 , Control Valve Part No-77790127 / Bt00004009 , Relief Valve Part No-77790143 , Repair Kit Part No-77791950 , Coupling Part No-77791963 / 77006110 , End Piece Cable Part No-77792860 , Pressure Switch Part No-77792872 , Lever Part No-77793000 , Seal Kit Part No-77793043 / 85094669 , Pump Part No-77794226 , Hydraulic Pump Part No-77794227 , Pump Kit Part No-77794272 , Valve Part No-77794273 / Bg01213161 , Valve Part No-77794274 , Relief Valve Part No-77794275 , Cartridge Part No-77794276 , Seal Kit Part No-77794277 / 77012790 , Front Head Part No-78050348 , Supply Flange Kit Part No-78064022 , Flushing Head Water Injection Tube Part No-78090652 , Flushing Head Part No-78090653 , Pressure Switch Part No-78090727 , Air Flushing Part No-78090780 , Water Flushing Head Part No-78090797 , Flushing Head Part Set Part No-78091541 , Gauge 0-60 Part No-78144161 , Percussion Filter Part No-78144163 , Valve Part No-78144172 , Accumulator Uncharged Part No-78217217 , Stabilising Jack Part No-78310165 , Relief Valve Part No-78320267 , Hydraulic Pump Part No-78320397 , Cooler Part No-78320461 , Sequence Valve Part No-78320517 , Check Valve Part No-78320556 , Pump Part No-78320633 , Hydraulic Pump Part No-78320639 , Check Valve Part No-78320651 , Check Valve Part No-78320711 , Hydraulic Pump Part No-78320715 , Manual Relief Valve Part No-78320753 , Control Bloc Part No-78320782 , Warning Light Part No-78320809 , Control Block Assy Part No-78323271 , Wire Assy Part No-78332057 , Wire Assy Part No-78332064 , Wire Assy Part No-78332140 , Wire Assy Part No-78332156 , Wire Assy Part No-78333055 , Wire Assy Part No-78333097 , Wire Assy Part No-78333134 , Harness Part No-78333145 , Wire Assy Part No-78333505 , Wire Assy Part No-78337055 , Wire Assy Part No-78337061 , Harness Part No-78337068 , Harness Part No-78337071 , Harness Part No-78337107 , Rockdrill Tools Part No-78340026 , Rockdrill Tools Part No-78340034 , Seal Kit Part No-78400839 , Seal Kit Part No-78400965 , Seal Kit Part No-78401076 , Replace Kit Part No-78401150 , Gear+Sleeve Kit Part No-78401170 , Seal Kit Part No-78401274 , Seal Kit Part No-78401284 , Seal Kit Part No-78401285 , Seal Kit Part No-78401287 , Seal Kit Part No-78401288 , Seal Kit Part No-78401289 , Seal Kit Part No-78401295 , Seal Kit Part No-78401315 , Seal Kit Part No-78401334 , Seal Kit Part No-78401337 , Seal Kit Part No-78401384 , Air Filter Kit Part No-78401499 , Indicator Kit Part No-78401630 , Diaphragm Kit Part No-78401789 , Sleeve+Seal Kit Part No-78401810 , Accumulator Kit ( Replaces 8217269) Part No-78401815 , Seal Kit Part No-78401867 , Seal Kit Part No-78401889 , Seal Part No-78401903 , Seal Part No-78401904 , Seal Kit Part No-78401923 , Seal Kit Part No-78401931 , Seal Kit Part No-78401936 , Cylinder 76310090 Part No-78402027 , Seal Kit Part No-78402038 , Housing Kit Part No-78402041 , Rectifier Part No-78402074 / 74182010 , Gear Kit Part No-78402149 , Decal Kit Part No-78402228 , Expendable Pin P/Set Part No-78407016 , Expendable Pin P/Set Part No-78407017 , Expendable Pin P/Set Part No-78407065 , Pin Parts Set Part No-78407066 , Expendable Pin P/Set Part No-78407069 , Pin Kit Part No-78407074 , Pin Parts Set Part No-78407101 , Stop Diesel Part No-78408133 , Detector Part No-78408435 , Cartridge Part No-78410284 , Control Valve Part No-78410310 , Relief Valve Part No-78410368 , Relief Valve Part No-78410372 , Relief Valve Part No-78410421 , Valve Part No-78410466 / 77723602 , Coupling Assy Part No-78410518 , Driveline Part No-78410552 , Driveline Part No-78410553 , Motor Kit Part No-78410572 , H200/H300 Motor 125 Cm3 Part No-78410574 , X2 Motor Part No-78410578 , Socket Part No-79170127 , Sleeve Part No-79180001 , Control Block Manifrl Part No-79290033 , Body Part No-79290100 , X2 Flushing Head Part No-79290120 / 70290643 , Flange Part No-79360029 , Yoke Part No-79540109 , Yoke Part No-79540138 , Yoke Part No-79540157 , Yoke Part No-79540164 , Tenon Part No-79560044 , Support Part No-79590246 , Bracket Part No-79590335 , Pipe Part No-79820515 , Pipe Part No-79820557 , Purifier Part No-79820559 , Extension Tube Part No-79820602 , Split Pin Part No-80007869 / Af03600104 , Circlip Part No-80011019 / Af20020060 , O-Ring Part No-80011839 / Af25010510 , O-Ring Part No-80011969 / Af25010514 , Spherical Plain Bearing Part No-80012719 / Af21150016 , Spring Pin Part No-80014049 , Ball Valve Part No-80015619 / 71010115 , Shrink Plastic 74038441 Part No-80023069 , Star Washer Part No-80024639 , Elbow Part No-80034539 , Usit-Seal Part No-80034799 , Usit Seal Part No-80034819 , Seal Part No-80034949 , Slotted Screw Part No-80061749 , O-Ring Part No-80065809 / Af25010509 , O-Ring Part No-80065939 / Af25010511 , Band Part No-80071109 , O-Ring Part No-80081679 , Slotted Screw Part No-80082559 , Slotted Screw Part No-80091579 , Usit-Seal Part No-80103149 , Lock Nut Part No-80130109 , O Ring Part No-80136849 / Af25010505 , O-Ring Part No-80151729 , O Ring Part No-80159549 , Seal Part No-80180269 , Needle Bearing Part No-80196379 , O-Ring Part No-80199429 , Locknut Rb Part No-80233399 / Af02200005 , U-Cup Part No-80313509 , Seal Part No-80314109 , Taper Roller Bearing Part No-80323409 / Af21070044 , Gear Part No-80380699 / 71191098 , O-Ring Part No-80409389 , Single Row Ball Bearing Part No-80414649 / Bg00672355 , Bonded Seal Part No-80416009 , Thread Connector R/B 04180301 Rb Part No-80431829 / Af10140001 , O-Ring Part No-80521789 , Wiper Part No-80611919 , Wiper Part No-80612089 , Wiper Part No-80612109 , Plug Part No-80644809 , Wiper Part No-80647829 , Taper-Lock Part No-80655019 , U-Cup Part No-80659909 , Switching Bridge+10 Screws *See I* Part No-80676809 , One Way Restrictor Part No-80698189 , Plug Part No-80704779 , Flector Part No-80724859 / 77006026 , U-Seal Part No-80764589 , Diaphragm Rb Part No-80765059 / Bg00568289 , Wiper Part No-80782369 , O-Ring Part No-80801069 / Af25010051 , O-Ring Part No-80878839 , Wiper Part No-81003989 / Bg01314978 , U-Cup Part No-81011999 , O-Ring Part No-81013509 , Oil Pump Part No-81019709 , Spring Pin Part No-81053489 , Quick Coupling Part No-81056259 , Quick Coupling Part No-81079239 , Pressure Gauge Part No-81100429 , Pressure Gauge Part No-81100559 , Lock Nut Part No-81125969 / Af02000008 , Lock Nut Part No-81126029 / Af02000006 , Connector Part No-81129469 / Af11150005 , #Dapter Rb Part No-81130009 / 4130144 , O-Ring Part No-81249969 , Suttle Valve Part No-81255399 , Plug Part No-81260379 , Plug Part No-81260409 / Af11280003 , Plug Part No-81260529 / Af11280004 , Plug Part No-81260789 / Af11280006 , Plug Part No-81260809 / Af11280007 , Lock Nut Part No-81262269 / Af02000005 , Equal Nipple Part No-81288279 / Bg00648390 , Lock Nut Part No-81294959 , Check Valve Part No-81315829 , Elbow Adapter Part No-81318729 / Af11200004 , O-Ring Part No-81319869 , Gauge Part No-81332299 , Valve Part No-81342219 , Seal Part No-81356309 , Cap Part No-81358609 , Cap Part No-81358739 , O-Ring Part No-81371989 , O-Ring Part No-81401749 , Ring Part No-81479709 , Relay Spdt. 24V20a R/B 81481359 Part No-81481359 / 64118855 , O-Ring Part No-81487289 , Bearing Part No-81503519 , Body Push Button Part No-81547309 / 55047274 , O-Ring Part No-81555039 , Bushing Part No-81561289 , Plate Part No-81623999 , Plate Part No-81624189 , U-Seal Part No-81628409 , Oil Filter Part No-81649209 , Indicator Part No-81662869 , Swivel Nut Elbow Part No-81670749 / Af11460011 , Swivel Nut Run Tee Part No-81671889 / Af11470008 , Dipsplug Part No-81672509 / Af11750002 , Female Connector Part No-81673109 / Af10320005 , Aadapter Part No-81674659 / Af11350006 , Steel Plug Part No-81674939 / Af10380007 , Piston Seal Part No-81681939 , O-Ring Part No-81685979 , Quick Coupling Part No-81688599 / Af11430005 , Plug Part No-81690959 / Af10380008 , Union Unit Part No-81691309 / Af10400008 , M/F Adapter Part No-81705709 , Plug Part No-81709749 / Af10380006 , Thread Elbow Part No-81709879 / Af10150013 , Union Tee Part No-81716189 / Af11480006 , Swivel Nut Run Tee Part No-81716339 / Af11470004 , Union Part No-81716469 / Af10070011 , Tube End Reducer Part No-81716599 / Af11500003 , Tube End Reducer Part No-81716619 / Af11500012 , Tube End Reducer Part No-81716749 / Af11520003 , Swivel Nut Elbow Part No-81718359 / Af11460005 , Seal Part No-81726929 , Seal Part No-81731759 , Connector Part No-81744279 , Connector Part No-81744309 , Tube End Reducer Part No-81764229 / Af11500002 , Temp Gauge Part No-81765809 , Thread Connector Part No-81768269 / Af10140003 , O-Ring Part No-81774129 , Seal Part No-81774259 , T-Connector Part No-81780409 , Valve Cartridge Part No-81780659 , Seal Part No-81794339 , U-Seal Part No-81794599 , Wiper Part No-81794619 , Union Nut Part No-81800109 / Af10400004 , Pressure Gauge Part No-81816349 , Seal Part No-81820039 , Push Button Green - Was 64120432 (Dupl) Part No-81863639 / 55047274 , O-Ring Part No-81873539 , Ball Valve Part No-81908199 , O-Ring Part No-81917519 , Elbow Fitting Part No-81930919 , Many Poles Clip Case Part No-81947349 , Hub Fitting Part No-81947479 , Many Poles Clip Plug Part No-81947629 , Many Poles Clip Plug Part No-81947759 , O-Ring Part No-81953209 , Female Connector Part No-81955769 / Af10320010 , Swivel Nut Elbow Part No-81956109 / Af11460002 , Tube End Reducer Part No-81956239 / Af11500021 , Spring Return Part No-81995089 / 77793090 , Seal Kit Part No-81995239 / 77793040 , Socket Part No-83674609 , Socket Part No-83674739 , Mounting Rail 1 Pc=2000 Mm Part No-85054659 , Terminal Part No-85054789 , End Press Part No-85054939 , Endplate ( Part No-85059579 , Spheric.Plain Bearin Part No-85069889 , Dipsplug Part No-85077899 / Af11740003 , Diode Part No-85096839 , Spring Part No-85165169 , Tube End Reducer Part No-85197729 / Af11500009 , Swivel Part No-85198329 / Af11470001 , Push-Button Switch Part No-85203219 , Seal Kit Part No-85223559 , Seal Kit Part No-85236899 / 77750841 , Marking Plate Part No-85288569 , Pressure Gauge Part No-85325179 , Plug Part No-85328079 , Male Connectorrb Part No-85338389 / Af11490021 , Union Part No-85339549 / Af10070023 , Cooler Part No-85350239 , Solenoid - 24V Part No-85354969 / 69005273 , O Ring Part No-85357589 , Tube End Reducer Part No-85378009 / Af11500005 , O-Ring Part No-85387979 , Pulley V Belt Part No-85443529 , O-Ring Part No-85520689 , O-Ring Part No-85520709 , Blow Down Valve Part No-85524469 , Valve Part No-85529129 , Shrink Plastic Part No-85548459 , Pump Packing Part No-85559499 / 77791952 , Swivel Nut Elbow Part No-85591839 / Af11620009 , Spher. Plain Bearing Part No-85592029 / Af21150017 , Body Part No-85602529 , O-Ring Part No-85646299 , Terminal Part No-85647049 / Bg00875926 , Component Plug Part No-85647179 / Bg00875926 , Male Stud Fitting Part No-85647329 , Seal Kit - Bom In T-Text Part No-85670069 , Tube Stack Part No-85676689 , Plug Part No-85713729 , High Pres. Hose Assy: Part No-85727009 , Steel Plug Part No-85730219 / Af10380005 , Push-Button Switch Yellow Part No-85761749 , O-Ring Part No-85835709 , Seal Part No-85843849 , Union Part No-85846339 / Af10070003 , Plug Part No-85864379 , Non-Return Valve Part No-85896529 , Direct.Control Valve Part No-86425779 , Tee Part No-86527549 / Af11470006 , M/F Adapter Part No-86540259 , Swivel Nut Elbow Part No-86548899 / Af11620004 , Pressure Gauge Part No-86564659 , Plug Screw Part No-86568309 / Af11720025 , Pressure Switch Part No-86639509 , Str.Thread Connector *Pho Part No-86676999 / Af10270007 , Cable Part No-86710859 , Cable Part No-86710989 , Wiper Part No-86765969 , Seal Kit Part No-86767039 / 77790091 , Seal Kit Part No-86779089 / 88048929 , Lever Assy Part No-86783749 , Cable500v Part No-86793809 , Deep Groove Ball Bearing Part No-86798699 , Knob Part No-86801569 , Relief Valve Part No-86847939 , Gauge Fitting Part No-86873169 , Seal Kit Part No-86878089 , Guide Ring Part No-86893099 , Element, Engine Oil Filter Part No-86895139 / 69005234 , Lock Nut Part No-86912899 , Seal Kit Part No-86930549 , Pressure Seal Part No-86959869 , O-Ring Part No-86973329 , O-Ring Part No-86993539 / Af25020499 , Pressure Switch Part No-87025489 , Pressure Switch Part No-87025509 / 8000116 , Cable Part No-87029399 , Cable Part No-87029419 , Torque Wrench Part No-87049219 , Socket 19Mm Part No-87049349 , Socket 22Mm Part No-87049479 , Socket 24Mm Part No-87049509 , Socket 30Mm Part No-87049629 , Socket 36Mm Part No-87049759 , Spanner Part No-87049889 , Wrench Part No-87049909 , Link 27Mm Part No-87050009 , Wrench 30Mm Part No-87050139 , Wrench 41Mm Part No-87050399 , Extension Bar Part No-87051019 , Wrench Head 19Mm Part No-87051309 , Non-Return Valve Part No-87051559 , Plug Part No-87169289 / Af11720026 , Seal Kit Part No-87169439 , Thearrd Element Part No-87170919 , Socket 46Mm Part No-87244579 , Safety Valve Part No-87252329 , Oil Filling Group Part No-87253059 , Cable Part No-87256519 , Piston Seal Part No-87263089 , Guide Ring Part No-87263109 , Guide Ring Part No-87263239 , Piston Rod Seal Part No-87263499 , O-Ring Part No-87284609 , Seal Kit Part No-87285619 , Lock Nut Part No-87454109 , Rubber Cover Part No-87482869 , Thread Element Part No-87902489 , Seal Kit Part No-87906679 , Pressure Limit Part No-87910519 / Bg01372565 , Solenoid Valve Cable. 24V Part No-87936809 , Union Part No-87939559 / Af10070022 , Non-Return Valve Part No-88065959 , Socket Cover Part No-88073149 , Open End Socket Part No-88097679 , Shuttle Valve Cartr. Part No-88110579 , Pressure Reducing Valve Part No-88110609 , 3/2-Hydr.Cartr.Valve Part No-88110729 , Pressure Reducing Valve Part No-88110859 , Pressure Compensator Part No-88110989 , Plug Part No-88113909 / Af11720027 , Plug Screw Part No-88114079 / Af11720028 , Plug Part No-88114109 / Af11720029 , Check Valve Part No-88122519 , Plug Part No-88124539 / Af11710007 , Press.Relief Valve Part No-88126839 , Directional Valve Part No-88127159 , 3/2-Directional Valv Part No-88129179 , Handle Knob Part No-88177759 , Pilot Control Valve Part No-88178079 , Pilot Control Valve Part No-88178229 , Thread Element Part No-88189399 , Seal Bushing Part No-88189549 , Seal Part No-88204749 / 71081574 , Seal Part No-88205069 / 71081555 , Spring Part No-88208099 / 71081562 , O-Ring Part No-88219159 , End Plate Part No-88220079 , Spool Section Seal Kit 66512933 Part No-88220229 , Mechanical Ac.Module Part No-88220489 , Spring Type Straight Pin Part No-88232279 / Af03600076 , Seal Kit Part No-88253239 , Seal Kit Part No-88253369 , Seal Kit Part No-88253499 , Coil Part No-88253519 , Lever Assy Part No-88259169 , Piston Centering Kit Part No-88261119 , Orifice+Nonret.Valve Part No-88261249 , Seal Kit Part No-88261379 , Repair Kit Part No-88263009 , Piston Seal Part No-88278779 , Rubber Billow Part No-88282339 , Knob Part No-88282469 , Check Valve Part No-88287409 , Seal Kit Part No-88288009 , Spool + Spring Part No-88288269 , Hydr. Activating Body Part No-88288399 , Knob Part No-88288419 , Holding Solenoid Part No-88288549 , Rubber Part No-88288679 , Pilot Valve Assy Part No-88288829 , Pilot Valve Assy Part No-88288959 , Valve Assy Part No-88289019 , Seal Kit Part No-88289309 , Valve Assy Part No-88289559 / 55059130 , Seal Kit Part No-88300029 , U-Seal Part No-88323399 , Guide Ring Part No-88323419 , Union Part No-88338519 / Af10070009 , Inclination Gauge Part No-88365609 , Seal Kit Part No-88375889 , Boom Valve Assembly Part No-88400609 , Valve Section Part No-88400859 , Check Valve Part No-88426209 , Seal Part No-88434189 / 77007207 , Overcenter Valve Part No-88435629 , Pilot Control Valve Part No-88436769 / 88289429 , Seal Kit Part No-88480909 , Shaft Seal Part No-88481219 , Deep Groove Ball Bearing Part No-88487559 / Bg00672478 , Rain Cap Part No-88497179 / 77007061 , O-Ring Part No-88525329 , Cable Gland (Braided Snield) Part No-88556449 , Cable Gland (Braided Snield) Part No-88556609 , Cable Gland Part No-88556859 , Threaded Rod Part No-88560009 , Directional Valve Part No-88586709 , Terminal Marking Strip Card Part No-88592829 , Work Light Part No-88595609 , End Socket Part No-88636409 , Control Valve Part No-88638829 , Seal Kit Part No-88639019 , Solenoid Part No-88639149 , Cavity Plug Cartidge Part No-88683009 , Hydr.Hose Part No-88689749 , Hydr.Hose Part No-88691269 , Sleeve Part No-88691399 , Hydr.Hose Part No-88692709 , Sleeve Part No-88692839 , Cable Assembly24v Part No-88729129 , Plug Part No-88732889 , Direction Valve Mod. Part No-88736009 , Basic Module (See Texts) Part No-88736389 , Shock And Antic.Valv Part No-88736539 , Shock And Antic.Valve Part No-88736669 , Slydring Rod Part No-88741239 , U-Seal Part No-88741369 , Eye Piece Part No-88741499 / 71407430 , Seal Kit Part No-88748739 , Seal Kit Part No-88750009 , O-Ring Part No-88750669 , Valve Section Part No-88762609 , Button Part No-88766809 , Push Button Cover With Symbol Part No-88766929 , Push Button Cover With Symbol Part No-88767659 , Push Button Cover With Symbol Part No-88768009 , Sequence Valve Part No-88770339 , Over Center Valve Part No-88770619 , Push Button Cover Part No-88775389 , Pressure Rel.Valve Part No-88782259 , Over Center Valve Part No-88788059 , 3P Switch Head Part No-88789759 , Piston Rod Seal Part No-88794459 , Piston Rod Seal Part No-88794589 , Shaft Seal Part No-88794609 , Pressure Relief Valve Part No-88801109 , Conrol Block Part No-88801239 , Pressure Switch Part No-88801369 , Pressure Red./Relieving Valve Part No-88801499 , Check Valve Part No-88801519 , Bearing Part No-88809749 , Terminal Part No-88814169 , End Plate Part No-88814319 , Marking Plate 11-20 Part No-88814609 , Marking Plate 21-30 Part No-88814729 , Relay Part No-88815209 , Relay Base Part No-88815329 , Delay Time Relay Part No-88815459 , Relief Valve Fitting Part No-88817219 , Control Valve Part No-89538029 / Bg00648389 , Shaft Seal Kit Part No-89542409 , O-Ring Part No-89552979 / 55155033 , Repair Kit Part No-89555189 , Repair Kit Part No-89555599 , Spring Part No-89565369 / 55155079 , O-Ring Part No-89573939 , O-Ring Part No-89594469 , Non-Return Valve Part No-89597779 , O-Ring Part No-89624509 , Elbow Part No-89726819 / 55155038 , Service Indicator Part No-89727009 , Electrical Motor380v Part No-89730919 , Air Filter Element Part No-89732099 / 55071773 , Safety Cartridge Part No-89732119 / 55071791 , Screw, Hexagon Head, Full Thread Part No-Af00100326 , Screw, Hexagon Head, Partial Threa Part No-Af00100650 , Screw, Hexagon Head, Partial Threa Part No-Af00100840 , Screw, Hexagon Head, Partial Threa Part No-Af00101224 , Washer, Lock, Disc-Lock Part No-Af03000031 , Washer, Lock, Disc-Lock Part No-Af03000032 , Washer, Lock, Double Part No-Af03000120 , Washer, Lock, Disc-Lock Part No-Af03000121 , Washer, Lock, Disc-Lock Part No-Af03000122 , Washer, Lock, Disc-Lock Part No-Af03000124 , Male Stud Elbow Adapter Part No-Af10150007 , Plastic Pipe Part No-Bg00312133 , Service Kit Part No-Bg00323348 , Service Kit Part No-Bg00323740 , Service Kit Part No-Bg00323744 , Service Kit Part No-Bg00323808 , Service Kit Part No-Bg00323812 , Oil Filter Part No-Bg00323815 , Oil Separator Part No-Bg00323824 , Valve Discharge Part No-Bg00323879 , Overcenter Valve Part No-Bg00326359 , Overcenter Valve Part No-Bg00326360 , Button Part No-Bg00382999 , Compressor Assembly Ctn10 Part No-Bg00865150 , Clogging Indicator Part No-Bt00013366 , Membrane Part No-30190 , Main Valve Bushing Part No-30217 , Valve Housing Part No-32069 , Seal Part No-40104 , Spool Part No-40112 , Seal Part No-40139 , Wedge Part No-40353 , Lock Plate Part No-40367 , Filling Plug Part No-40368 , Seal Part No-40388 , Seal Part No-40390 , Seal Part No-40391 , Accumulator Screw Part No-40392 , Rubberring Part No-40396 , Cover Part No-40418 , Spool Part No-40419 , Acc. Charging Device Part No-40633 , Locking Plate Part No-41081 , Shim Plate Part No-41793 , Shim Plate Part No-41794 , Shim Plate Part No-42364 , Spring Part No-42461 , O Ring Part No-90004 , O Ring Part No-90011 , O Ring Part No-90012 , O Ring Part No-90013 , O Ring Part No-90017 , O Ring Part No-90018 , O Ring Part No-90019 , O Ring Part No-90024 , O Ring Part No-90025 , Usit Ring Part No-90056 , Spring Part No-90104 , Spring Ring Part No-90302 , Split Pin Part No-90321 , Parallel Pin Part No-90342 , Lock Ring Part No-90350 , Flange Plug Part No-90403 , Flange Plug Part No-90424 , Flange Plug Part No-90444 , Check Valve Part No-90532 , Lifting Eye Part No-90605 , Spherical Bearing Part No-90834 , Taper Plug Part No-93125 , Wiper Part No-94043 , Piston Part No-100507 , Accumulator Cover Part No-100510 , Brether(Incl Part 55.2) Part No-101200 , Seal Part No-102142 , Seal Part No-102146 , Shield Plate Part No-102559 , Wear Plate Part No-102621 , Wear Plate Part No-102729 , Tie Rod Nut Part No-104012 , Tie Rod Part No-104013 , Front Head Part No-110701 , Plug Part No-110710 , Spring Guide Part No-112510 , Plug Part No-112512 , Seal Part No-151217 , Lower Tool Bushing Part No-151264 , Seal Set (Kit) Part No-151490 , Shield Plug Part No-154015 , Cylinder Part No-156197 / 180133 , Kit Lable Set Part No-157283 , Pad Part No-300768 , Upper Tool Bushing Part No-300773 , Check Valve Part No-300801 , Main Spool Part No-300803 , Accumulater Screw Part No-301020 , Reataining Pin Part No-400323 , Rubberplug Part No-400566 , Tool Retaining Pin Part No-400584 , Reataining Pin Part No-400588 , Spool Part No-400652 , Rubberplug Part No-400676 , Flange Part No-847660 , O Ring Part No-901026 , Split Pin Part No-901136 , O Ring Part No-902122 , Bushing Part No-902724 , O Ring Part No-910006 , O Ring Part No-910016 , O Ring Part No-910018 , Wiper Part No-911040 , Seal Part No-950149 , Seal Part No-950150 , Seal Set Part No-951078 , Radiator Cap 12-16 Psi Part No-4521237 / 69041035 , Downstream Pressure Regulating Valve Part No-4691203 , Valve Spool+Plug Part No-4691836 , Flange Part No-4692157 , Shield, Dust Part No-4692412 , Bearing Cone Taper Roller Part No-4692677 , Cup, Hub Part No-4692678 , Cap Screw Part No-4692732 , Cap Screw Part No-4692734 , Shaft, Planet Part No-4692901 , Spacer Part No-4692902 , Roller Needle Part No-4692903 , Shim Part No-4692909 , Lock Nut Part No-4692916 , Gear Planet Part No-4692943 , Hub Gear Part No-4692944 , Gear Sun Part No-4692945 , Seal Oil Part No-4692952 , Spindle Part No-4692955 , Planet Carrier Assembly Part No-4692961 , Flange Part No-4692996 , Axle Shaft Short Part No-4692998 , Axle Shaft Long Part No-4692999 , Sleeve, Pinion Bearing Part No-4693001 , Seal Part No-4693002 , Flange Part No-4693003 , Disc Brake Part No-4693006 , Diff & Carrier Assy Part No-4693028 , Spindle Lock Nut Part No-4693076 , Spindle Nut Lock Assembly Part No-4693077 , Cap Part No-4693406 , Plug Part No-4693470 , Flange Part No-4693480 , Dipstick Part No-4693598 , Spring, Accumulator Part No-4694051 , Electrical Indicator Assy Part No-4694119 , Inhall Bearing Ring Part No-4694137 , Impeller Hub Screw Part No-4694138 , Turbine Hub Screw Backing Ring Part No-4694139 , Valve Assy Part No-4694175 , Ring, Snap Part No-4694185 , Magnet Part No-4694189 , Cover To Case Screw Lockwasher Part No-4694262 , Solenoid Interconnect Wire Part No-4694319 , Washer, Lock Part No-4694366 , Bearing Cone Taper Roller Part No-4694397 , Diff. & Carrier Attaching Nut Part No-4694407 , O-Ring Part No-4694477 , Sealing Ring Kit Bom Part No-4694612 , Bearing Cup * Part No-4695583 , Bearing Cone, Tapered Roller Part No-4695584 , Bearing Part No-4695695 , Retaining Plate Shim Part No-4695696 , Retaining Plate Shim Part No-4695697 , Retaining Plate Shim Part No-4695698 , Retaining Plate Shim Part No-4695699 , Rear Bearing Cone Part No-4695700 , Front Bearing Cup Part No-4695702 , Front Bearing Cone Part No-4695703 , Disc Hub Snap Ring Part No-4695705 , Clutch Support Part No-4695706 , Clutch & Hub Assy Part No-4695709 , Piston Ring Part No-4695710 , Piston Ring Part No-4695711 , Circlip Part No-4695712 , Circlip Part No-4695713 , Keyed Washer Part No-4695714 , Key Washer Part No-4695715 , Cap Part No-4696006 , Clutch Support Piston Ring Part No-4696017 / Bg00222980 , Snap Ring Part No-4696019 , Snap Ring Part No-4696020 , Keyed Washer Part No-4696021 , Keyed Washer Part No-4696022 , Keyed Washer Part No-4696023 , Outer Race Part No-4696097 , Regulator Spool Assembly Part No-4696150 , Regulator Spool Plug Part No-4696151 , Drive Plate Mounting Screw Part No-4696154 , Divine Plate Bearing Ring Part No-4696157 , Gear Retaining Plate Part No-4696229 , Gear Part No-4696230 , Idler Shaft Lube Plate Part No-4696231 , Gear Bearing Oil Baffle Part No-4696232 / Bg01829887 , Front Bearing Oil Baffle Part No-4696233 / Bg01829886 , Idler Shaft Part No-4696234 , Spring Speedo Drive Was Dup 69036419 Part No-4696235 , Cover 1St And 2Nd Clutch Part No-4696236 , Shaft Part No-4696237 , Transmission Case Assembly Part No-4696238 / Bg00469156 , Gear Part No-4696239 , Bearing Lock Pin Part No-4696241 , Gear Part No-4696242 , Idler Bearing Lube Tube Part No-4696244 , Spring Part No-4696258 , Pin Part No-4696259 , Keyed Washer Part No-4696261 , Rear Bearing Cup Part No-4696262 , Impeller Cover Part No-4696403 , Housing Rear Cover Part No-4696420 , Lock-Up Adapter Part No-4696421 , Speed Sensor Bushing Part No-4696422 , Cap Stud Part No-4696484 , O-Ring Part No-4696489 , Forward-Reverse Selector Valve Spo Part No-4696640 , Adjuster Bushng Plug N.I. Part No-4696737 , O-Ring Part No-4696795 , O-Ring -Vicon Part No-4696800 , Flange Nut Part No-4696851 , Dipstick Tube Part No-4696858 , Spacer Part No-4696885 , Speed Sensor Housing Screw Part No-4696888 , Shaft, Sensor Drive Part No-4696889 , Gear-Sensor Part No-4696890 , Gear Roll Pin Was Dupl 69036418 Part No-4696891 , Self Locking Sensor Screw Part No-4696902 , Cup Part No-4697088 , Cone,Tapered Roller Bearing Part No-4697089 , Plug Part No-4697154 , Coil, 24V Part No-4697186 , O-Ring Part No-4697238 , Tube, Lube Part No-4697262 , Release Spring Part No-4697268 , Snap Ring Part No-4697270 , Drain Plug Part No-4697332 , Spool Part No-4697338 , Mounting Plate Part No-4697343 , Flange O-Ring Part No-4697359 , Seal Kit Part No-4697401 , Shaft Part No-4697405 , Spacer Part No-4697407 , Gear Part No-4697421 , Gear Part No-4697423 , Yoke Part No-4697492 , Flange Part No-4697495 , Ring Snap Part No-4697541 , Flange, Output Part No-4697595 , Flange Part No-4697616 , Cone* Part No-4697632 , Cup * Part No-4697633 , Bearing Cone Part No-4697634 , Pinion Oil Seal Part No-4697713 , Circlip Part No-4697806 , Turbine Shaft Gear Part No-4697948 , Output Shaft Gear Part No-4697949 , Input Shaft Part No-4697951 , Gasket Part No-4697987 , Spring Part No-4698007 , Plug Part No-4698008 , Seal Part No-4698011 , Stud Part No-4698051 , Fwd. Rev. Piston Guide Part No-4698076 , O-Ring Part No-4698077 , Forward Reverse Piston Part No-4698078 , Cap Stop Part No-4698079 , Fwd-Reverse Valve Spool Spacer Part No-4698080 , Spring Part No-4698081 , O-Ring Part No-4698145 , Ball Part No-4698497 , Circlip Part No-4698528 , R/B 04698572 Lockwasher Part No-4698572 / 4694300 , Solenoid 24V Part No-4698577 , O-Ring, Solenoid Valve Part No-4698578 , O-Ring, Solenoid Valve Part No-4698579 , Plug Part No-4698592 , O-Ring Part No-4698872 , Filter Assy Part No-4698883 , Seal, Output Shaft Oil Part No-4698940 , Pin, Roll Part No-4699018 , Pin, Roll Part No-4699019 , Spacer Part No-4699044 , Ball,Steel Part No-4699078 , Cap, Pipe Part No-4699080 , Seat, Valve Part No-4699090 , Spacer Part No-4699092 , Baffle Part No-4699101 , Cover, Clutch Part No-4699151 , Sensor Screw Washer Part No-4699185 , Expander When Nla Use 04699198 Part No-4699199 / 4699198 , Tube Part No-4699243 , Plug, Pipe Was Dupl 04694308 Part No-4699244 , Plug, Pipe Part No-4699246 , Cap, Bearing Part No-4699247 , Tube Part No-4699248 , Cover Screw Part No-4699252 , Hub, Impeller Part No-4699258 / 4699008 , Ring Was Dupl 04691219 Part No-4699273 , Clip, Tube Part No-4699277 , Rivet Part No-4699278 , Plug,Bolt,Hex-Head Part No-4699283 , Plug,Bolt,Hex-Head Part No-4699285 , Plug,Bolt,Hex-Head Part No-4699286 , Plug,Bolt,Hex-Head Part No-4699287 , Washer, Sealing Part No-4699288 , Union, Adapter Part No-4699290 , Plug, Pipe Part No-4699292 , Pin Part No-4699295 , Stop, Valve Part No-4699296 , Spacer Part No-4699300 , Plate, Cover Part No-4699301 , Housing Assy, Dipstick Part No-4699307 , Ring Snap Part No-4699341 , Seal Oil Part No-4699367 / Bg01417973 , O-Ring Part No-4699393 , Ring Part No-4699409 , Ring Part No-4699410 , Bearing Cup Part No-4699419 , Bearing Cone Part No-4699420 , Plug Part No-4699452 , Tube Part No-4699468 , Tube Part No-4699469 , Stud Part No-4699490 , Pipe, Oil Filler Part No-4699492 , Ball Part No-4699497 , Speed Sensor Gear Screw Rb Part No-4699532 / 4695494 , Plug Part No-4699572 , Plug Part No-4699573 , Plug, Pipe Part No-4699582 , Sleeve Part No-4699587 , Input Flange, Companion Part No-4699649 , Plug, Pipe Part No-4699678 , Stud, Wheel Part No-4699695 , O Ring Part No-4699700 , Ring Piston Part No-4699717 , Spring, Expander Part No-4699718 , Sleeverb Part No-4699720 , Hub Face Seal Part No-4699733 , O-Ring Part No-4699807 , O-Ring Part No-4699817 , Rivet Part No-4699857 , Tube Part No-4699859 , Ring Piston Part No-4699863 , Ring Outer Piston Part No-4699867 , Disc Inner Lock-Up Part No-4699869 , Snap Ring, Backing Plate Part No-4699870 , Lock Plate, Snap Ring Part No-4699871 , Screw, Lock Plate Part No-4699872 , Backing Plate, Lock-Up Part No-4699875 , Outer Disc Lock-Up Part No-4699876 , Piston, Lock-Up Part No-4699877 , O-Ring Inner Piston Part No-4699878 , Nut Part No-4699902 , Breather Part No-4700190 , Seal Oil Part No-4700221 , Bearing Taper Roller Assy Part No-4700235 , Shield, Dust Part No-4700240 , Spacer Part No-4700241 , Bearing Cylinder Roller Part No-4700243 , Ring, Sealing Part No-4700270 , Plug Part No-4700274 , Plug Part No-4700342 , Spool, Valve Was Dupl 04697666 Part No-4700370 , Spring, Neutral Valve Part No-4700371 , Spool, Regulator Valve Part No-4700373 , Spring Part No-4700374 , Spool Spring, Outer Part No-4700375 , Spring, Safety Valve Part No-4700376 , Speed Valve Second Part No-4700380 , Valve Part No-4700381 , Spring, Selector Valve Part No-4700383 , Piston, Shut-Off Valve Part No-4700387 , Guide, Valve Piston Part No-4700390 , O-Ring Part No-4700391 , Ring, Snap Part No-4700392 , Piston Part No-4700393 , Ring, Piston Part No-4700394 , Ring, Piston Part No-4700395 , Plug, Pipe Part No-4700400 , Housing, Shifter Part No-4700405 , Ring, Snap Part No-4700406 , Ring, Snap Part No-4700413 , Pin Part No-4700417 , Disc, Outer Part No-4700418 , Disc, Inner Part No-4700419 , Plate, End Part No-4700420 , Clutch Disc Part No-4700426 , Plate, End Part No-4700427 , Disc,Clutch Part No-4700428 , Ring, Snap Part No-4700429 , Spring Part No-4700451 , Spring Part No-4700452 , Piston Part No-4700453 , Valve Stop Part No-4700454 , Valve, Check Part No-4700459 , Seal, Oil Part No-4700462 , Shim Part No-4700464 , Shim Part No-4700465 , Shim Part No-4700466 , Gasket, Cork Part No-4700471 / Bg01316605 , Plug,Bolt,Hex-Head Part No-4700473 , Pin Part No-4700476 , Bearing Cylindrical Roller Part No-4700477 , Oil Sump Assembly Part No-4700481 , Cup Part No-4700482 , Bearing Tapered Roller Radial Part No-4700483 , Shaft, Output Part No-4700484 , Gasket Part No-4700487 / Bg00587944 , Gasket Part No-4700497 / Bg01316608 , Bearing, Tapered Roller Part No-4700502 , Cap, Bearing Part No-4700505 , Seal, Oil Part No-4700506 , Shaft, Gear Part No-4700521 , Gasket Part No-4700522 , Capscrew Part No-4700523 , Spacer Part No-4700528 , Bearing, Radial Ball, 110Mm Part No-4700530 , Gasket, Bearing Cap Part No-4700531 , Tube Part No-4700533 , Tube Part No-4700540 , Tube Part No-4700541 , Reaction Member Part No-4700547 / Bg01529434 , Pin Part No-4700548 , Ring, Snap Part No-4700549 , Spring, Pressure Part No-4700552 , Piston Part No-4700553 , Spring, Regulator Part No-4700554 , Gasket Part No-4700555 , Tube Part No-4700556 , Tube Part No-4700557 , Tube Part No-4700558 , Ring, Snap Part No-4700561 , O-Ring Part No-4700562 , Pin, Dowel Part No-4700570 , Ring, Snap Part No-4700573 , Snapringrb Part No-4700574 , Screw, Impeller To Cover Part No-4700583 , Spacer Part No-4700585 , Sleeve, Oil Distributor Part No-4700588 , Shim(.004) Part No-4700590 , Shim(.007) Part No-4700591 , Shim(.010) Part No-4700592 , Pin, Dowel Part No-4700596 , Bearing, Radial/Single Row/Roller Part No-4700598 , Ring, Snap Part No-4700602 , O-Ring Part No-4700607 , Cap Part No-4700608 , Bearing Cup, Tapered Roller Part No-4700610 , Ring Piston Part No-4700611 , Shim(.004) Part No-4700613 , Shim(.007) Part No-4700615 , Shim(.010) Part No-4700616 , Plug Part No-4700708 , Pin, Valve Control Part No-4700719 , Race, Outer Part No-4700732 , Retainer Part No-4700733 , Bearing Cone Part No-4700735 , Spacer Pinion Roll Part No-4700849 , Stud, Wheel Part No-4700855 , Idler Shaft Nut Part No-4700922 , Pin, Roll Part No-4700991 , Speed Sensor Housing Cover Part No-4700993 , Rubber Grommet, Bottom - For 69041324 Part No-4790080 , Gromet Rubber Part No-4790082 / 69013854 , Rubber Seals (For 64582637) Part No-4790137 , Throttle Pedal Part No-4790774 , Treadle Pin Kit - Was 69036543 (Dupl) Part No-4790824 , Roller Kit - Was 69036541 (Dupl) Part No-4790825 , Special Tool Set (See Kit List) Part No-15225768 , Flushing Divice Assembly Part No-15274948 , Stand Part No-15483038 , Guide Strip 5143Mm Part No-20891748 , Strip (L=5753) Part No-20891878 , Centralizer Part No-26368598 , Taper Pin Assy Part No-26438771 / 26438928 , Slide Frame Part No-30299518 , Cover Part No-32163528 , Cylinder Tube Part No-32359578 , Front Centralizer Part No-32532298 , Guide Piece Part No-33191234 , Rod Part No-33275108 , Beam Assembly Tf500-12 Part No-34449502 , Orifice Part No-34501258 , Limit Bushing Part No-34568718 , Split Pin Part No-47148300 / Af03800290 , Connecting Box Part No-55000283 , Reel Assy Part No-55001104 , Spcial Tools Part No-55006507 , Rotation Motor Part No-55009785 , Connecting Parts Hlxd Part No-55010618 , Locking Part No-55014921 , Mounting Plate Part No-55016752 , Mounting Plate Part No-55016856 , Wear Piece, 1 1/2 Part No-55021572 , Slipper Pad Part No-55024687 , Wear Piece, 1 1/4 Part No-55024689 , Gear Box Part No-55046628 , Valve Body Kit Part No-55066744 , Seal Housing Guide Ring Part No-55069568 / Bg00821314 , Inlet Valve Part No-55155202 , Cyclone Part No-55155212 , Belt Drive Kit Part No-55155431 , Check Valve Rb Part No-55215605 / 89597779 , Cable Assembly Part No-55226686 , Impeller Part No-56001744 , Turbine Part No-56001745 , Set Part No-56001807 , Rubber Seal Lock (Was Dupl 69039541) - For 69041325 Part No-56008025 / 4790080 , Rubber Seal (Was Dupl 69039540) - For 69041325 Part No-56008027 / 4790082 , Flex-Plate Kit Part No-56008908 , Starter Motor Part No-56012786 / 69044304 , Seal Part No-56012793 , Seal Part No-56012799 , Seal Part No-56012812 , Seal Ring Part No-56012815 , Bladder Part No-56012833 , Cover Part No-56012851 , Directional Valve 77011742 Part No-56014161 , Cover Part No-56018318 , Nozzle (See T-Text) Part No-56022222 , Turbochargerrb Part No-56022223 / Bg00285332 , Housing Converter Part No-56028097 , Flex Plate Mtg Grp Part No-56028106 , Housing Lockup & Modulator Valve Part No-56031267 , Kit, Drive Plate Part No-56031509 , Rubber Curve Part No-56033027 , Steering Wheel Part No-56039602 , Center Part No-56039604 , F/A Adapter 90 Deg Part No-64100025 , Connector Part No-64100028 / 4132508 , F/A Adapter - 90 Deg. Part No-64100062 / 001084-015 , F/A Adapter Tee Part No-64100117 , F/A Adapter 90 Deg Part No-64100219 , F/A Adapter Part No-64100245 , F/A Adapter Part No-64100251 , F/A Adapter 90 Deg Part No-64100328 , F/A Adapter Part No-64100379 , F/A Adapter 90 Deg Part No-64100389 , F/A Adpter Str Part No-64100391 , F/A Adapter Part No-64100392 / Af11120020 , F/A Adapter 90 Deg Part No-64100438 , Decal, Nameplate Part No-64100618 , Neutral Switch Transmission (64100649) Part No-64100644 , F/A Adapter - 90 Deg. Part No-64100681 , F/A Adapter Part No-64100696 , F/A Adapter Str Part No-64100697 , F/A Adpter Str Part No-64100839 , O-Ring Part No-64100853 , Exhaust Clamp ( U Clamp) Part No-64101298 / 975-450028 , F/A Adapter Str Part No-64101314 , F/A Adapter - 45 Deg. Part No-64101341 , F/A Adapter Str Part No-64101516 , Bearing, Radial Ball 105Mm Part No-64101548 , F/A Adapter 90 Deg Part No-64101557 , Element, Filter Part No-64101672 , O Ring Part No-64101710 , Valve, Safety Part No-64101758 , F/A Adapter Part No-64101837 , F/A Adapter Str Part No-64101852 , F/A Adapter Str Part No-64101853 , O Ring Part No-64101879 , Stariner Basket Part No-64102135 , F/A Adapter 90 Deg Part No-64102247 , F/A Adapter Tee Part No-64102260 , F/A Adapter - 90 Deg. Part No-64102261 , F/A Adapter - Reducer Part No-64102266 , F/A Adapter Part No-64102270 , F/A Adapter - 90 Deg. Part No-64102272 , F/A Adapter 90 Deg Part No-64102274 , F/A Adapter - Tee Part No-64102295 , F/A Adapter - Reducer Part No-64102452 , Driveshaft, Ä8c Part No-64102831 , Splined Yoke Part No-64102837 , Driveshaft Part No-64102843 , Hyd Pump Part No-64102872 , F/A Pipe Plug Adapter Part No-64102890 / 001137-001 , O-Ring Part No-64103000 , F/A Adapter 90 Deg Part No-64103083 , F/A Adapter - Plug Part No-64103125 / 001135-004 , F/A Adapter - Reducer Part No-64103140 , Breaker, Circuit, 15 Amp Part No-64103252 , F/A Adapter - Tee Part No-64103379 , F/A Adapter - 90 Deg Part No-64103511 , F/A Adapter Part No-64103613 , O-Ring, 0.187 Part No-64103917 , O-Ring Part No-64103967 , F/A Pipe Plug Adapter Part No-64105513 , F/A Adapter-Tee Part No-64105635 , Split Flange Half Part No-64105790 , Flow Control Valve Part No-64106018 , F/A Adapter Test Port Part No-64106122 , Gauge Level Liquid Part No-64106197 , Breaker, Circuit Part No-64106224 , F/A Pipe Plug Adapter Part No-64106501 , F/A Pipe Plug Adapter Part No-64106502 , Fibromount Part No-64106586 , Clamp, Seal, Exhaust, 5 Part No-64106592 , F/A Pipe Plug Adapter Part No-64106718 , Clamp, Seal, Exhaust 4 Part No-64106926 , F/A Adapter - Reducer Part No-64107198 , H/C Hose Support Clamp Part No-64107373 , Handl- Cema 4 Enclosure Part No-64107763 , F/A Adapter - Plug Part No-64107813 , F/A Adapter 90 Deg Part No-64107918 , F/A Adapter 45 Deg Part No-64108050 , F/A Adapter - 90 Deg. Part No-64108068 , Elbow, Rubber Part No-64108429 , F/A Flange Half Part No-64108446 , Door Handle Mech Part No-64108483 , Cap Nut Part No-64108562 , F/A Adapter - Str Part No-64108706 , F/A Adapter - Str Part No-64108903 , Elbow Part No-64108937 , F/A Adapter Tee Part No-64109370 , T-Bolt, 1 3/8 - 1 9/16 Part No-64109506 , Alternator (24V) Part No-64109547 , F/A Adapter - Plug Part No-64109793 , Driveline Part No-64109948 , Dumpéhoist Pump Part No-64110163 , F/A Adapter - Plug Part No-64110516 , Mini Check Adapter Part No-64110549 , Axle Vent Part No-64110580 , Shaft Part No-64110608 , Band, Mounting Part No-64110852 , Switch W/Breaker 20 A Part No-64110863 , F/A Adapter - Str Part No-64111086 , Screw Type U Drive Part No-64112230 , F/A Adapter Part No-64112246 , F/A Adapter Part No-64112457 , F/A Adapter Part No-64112552 , O-Ring, Buna-A Part No-64112579 , F/A Adapter Tee Part No-64112586 , O-Ring, Buna-N Part No-64112654 , Heater Overload Part No-64113083 , F/A Split Flange Part No-64113099 / Af11800008 , Valve, 3-Way Part No-64113625 , Spider Cross Part No-64114126 / 1146114A , Split Flange Half Part No-64114593 , F/A Adapter Part No-64114647 , F/A Adapter Split Half Part No-64115025 /Af11800006 , Roller Chain Part No-64115593 , Single Sprocket Part No-64115594 , Chain Coupler Link Part No-64116112 , Pressure Sender Part No-64116603 , Element, Filter Part No-64116820 , Clamp, T-Bar Inlet Part No-64117546 , Bearing Cyl., Roller* Part No-64117581 , Control Cover Assembly Part No-64117663 , Pump, Charge/Scavenge Part No-64117679 , Hyd Throttle Control Part No-64118023 / 67012237 , Valve, Treadle, Hydraulic Part No-64118024 / 67012182 , Steer Pump Part No-64118134 , Valve, Shuttle, 3/8 Part No-64118244 , Relay, 24V, Dpdt Part No-64118480 , Bearing,Ball Part No-64118570 / 68084449 , Relay Td Adj Part No-64118791 , Trim Seal Part No-64118794 , Pressure Differential Switch Part No-64118979 , Omniwrap 1 1/4 Part No-64119015 , Valve, Accumulator Discharge45 Part No-64119023 , Valve Needle Part No-64119309 , Press. Sw. 60 Psi Decreasing Part No-64119327 , Valve, Relief Part No-64119451 , Switch Pressure Part No-64119624 , Valve Steer Part No-64119640 , Valve Bucket Hoist Part No-64119641 , Connector Part No-64119670 / Af10610023 , Connector, #16 Socket Contact Part No-64119868 , Connector, #16 Pin Contact Part No-64119869 / 8002284 , Pump Steer Part No-64119910 , Sender, Temperature, 1/2 Part No-64119924 , Sender, Oil Temperature,1/8 Part No-64119926 , Voltmeter, 24 Volt Part No-64119931 , Switch Master 4P Part No-64120067 , Valve Part No-64120092 , Valve Part No-64120093 , Solenoid Valve 2W-Nc Part No-64120123 , Releif Valve 100-300 Psi Part No-64120124 , Polyswitch - 5A Part No-64120137 , Diode Assembly Zener Part No-64120138 , Circuit Breaker 5 A Part No-64120151 , Circuit Breaker 15 A Part No-64120152 , Seal Pushbutton - Boot Part No-64120159 , Sender - Oil Press 28B Part No-64120167 , Speed Switch Part No-64120171 , Circuit Breaker 10A Part No-64120172 , Circuit Breaker - 20A Part No-64120173 , Eng. Oil Press. Gauge - 24V Part No-64120193 , Water Temp. Gauge - 24V Part No-64120194 , Drive Oil Pressure Gauge 24V Part No-64120233 , Emergency Brake Switch Part No-64120257 , Connector - 6P Part No-64120308 , Connector Cap Part No-64120309 , Ring Part No-64120475 , Decal, Converter Lockup Part No-64120542 , Square Indicator Light Red Part No-64120583 , Square Indicator Light Green Part No-64120584 , Square Indicator Light Yellow Part No-64120588 , Terminal Block With Diodes Part No-64120701 , Sender Oil Temp., 1/4 Part No-64120926 , Regulator Ballast 24 Volt - Was 69040200 (Dupl) Part No-64120977 / 69044126 , Circuit Breaker, 70A, 24V Part No-64120993 , Roller Lever Part No-64120999 , Door Limit Switch Part No-64122800 , Cable Gland Assy Part No-64122816 , Press. Sw.7 Psi Dual Circuit Part No-64122824 / 64119329 , Oil Pressure Switch12psi Part No-64122825 , Oil Temp., Switch, 200F N.O. Rising Part No-64122834 , Water Hose, 1 I.D Part No-64122919 , Pump Hydrostatic Part No-64123056 / 64623951 , Motor, Hydrostatic Part No-64123057 / 68081759 , Valve,Check Part No-64125030 , Pump - Bucket Part No-64125070 , Valve - Accumulator Charge Part No-64126003 , Limit Switch Part No-64129067 , Relief Valve Part No-64131001 , Swivel Ors Tee Part No-64131125 , Swivel Ors Tee Part No-64131127 , Tube Clamp (-08) Part No-64131181 , Pump Dump Part No-64131194 , Throttle System Part No-64132177 , Relay Spst 24V 8A Part No-64132343 , Front Box Decal Part No-64132364 , Decal Part No-64132366 , Engine Display Module Part No-64132411 / 037105-001 , Pres Sw.4 Psi Dual-Prod Choice Ttext Part No-64132425 / 64119328 , Terminal Block With Diode Part No-64132496 / 8003948 , Transducer, Pressure 0 - 25 Bar Part No-64132607 , Headlamp Assy Part No-64132617 / 64624354 , Resistor 150 Ohms Part No-64132634 , Contact #16 Pin, Gold Plated Part No-64132653 , Relay Dpdt 24V, 5A Part No-64132763 , Instrument Panel Wiring, External Part No-64132793 , Instrument Panel Wiring, Internal Part No-64132794 , Circuit Breaker 105A, Manual Reset Part No-64132821 / 015178-009 , Rubber Reducing Elbow 7-5 Part No-64133037 , Pilot Valve Part No-64135110 , Valve, Pilot Operator, Stackable Part No-64135111 , Hydraulic Cylinder Part No-64135124 , Commercial Steer Valve Part No-64136025 , Pilot Valve Part No-64136030 , Valve-Directional Cont. Bucket/Boom Part No-64136036 , Accumulator, 1 Qt (Uncharged) Part No-64136043 , Accumulator Charge Valve W/Relief Part No-64136045 , Pressure Reducing Valve Part No-64136047 , Switch Hydraulic Pressure Part No-64136048 , Inspection Cover Part No-64200275 , Valve Cap Part No-64201663 , Spacer Part No-64203883 , Pin Part No-64207225 , Bottom Carrier Assembly Part No-64208972 , Cinch Washer Part No-64211302 , Thrust Washer Part No-64217799 , Thrust Washer Part No-64217800 , Thrust Washer Part No-64217801 , Thrust Washer Part No-64217802 , Pin Part No-64222403 , Pin Part No-64222414 , Thrust Washer Part No-64223198 , Thrust Washer Part No-64223199 , Thrust Washer Part No-64223200 , Assembly Tank Cap Part No-64229334 , Pin Part No-64232865 , Sleeve Part No-64247065 , Sleeve Part No-64249192 , Sleeve Part No-64249202 , Sleeve Part No-64249208 , Bushing Part No-64249210 , Sleeve Part No-64249211 , Sleeve Part No-64249212 , Sleeve Part No-64249213 , Bearing Cartridge Part No-64253069 , Bearing Cartridge Part No-64253070 , Rework, O-Ring Plug Part No-64253140 , Seal Kit Part No-64253186 , Cyl., Steer, Dup. Seal, Ejc130 Part No-64253271 , Cyl., Dump, Dup. Seal, Ejc 130 Part No-64253276 , Seal Kit Part No-64253277 , Cyl., Lift, Dup. Seal, Ejc 130 Part No-64253278 , Cyl., Steer, Dup. Seal, Ejc430 Part No-64253282 , Seal Kit Part No-64253283 , Cyl., Eject, Dup. Seal, Ejc130 Part No-64253302 , Key Part No-64255203 , Seal Kit Part No-64255847 , Seal Kit Part No-64255848 , Seal Kit Part No-64255850 , Cover Plate Part No-64256548 , Sleeve Upper Articulation Part No-64257312 , Pin Upper Articulation Part No-64257336 , Bushing Part No-64257368 , Sleeve Part No-64257369 , Sleeve Part No-64257373 / 64249201 , Sleeve Part No-64257374 , Lock Collar Part No-64257375 , Pin Lower Articulation Part No-64257383 , Assy Dump Link Part No-64257393 , Bushing Part No-64257394 , Pin Part No-64257395 , Pin Hot Rolled Part No-64257396 , Pin Part No-64257397 , Hyd Cylinder Assy Steer Part No-64257408 , Piston Rod Part No-64257410 , Hyd Cylinder Assy 61 Lift Part No-64257411 , Piston Rod Part No-64257413 , Hyd Cylinder Assy Dump Part No-64257414 , Piston Rod Part No-64257416 , Pin Steer Part No-64257440 , Pin Dump Part No-64257444 , Pin Dump Part No-64257445 , Pin Lift Part No-64257446 , Pin Lift Part No-64257447 , Plate - Retaining Part No-64257466 , Sleeve Part No-64257544 , Bushing Part No-64257545 , Bushing Part No-64257546 , Bushing Part No-64257547 , Bushing Part No-64257548 , Bushing Part No-64257549 , Bushing Part No-64257550 , Bushing Part No-64257551 , Bushing Part No-64261832 , Collar Lock Part No-64263012 , Lincoln Lube Pump Kit Part No-64267600 , Accumulator, 1 Gallon Part No-64267671 , Junction Box Rework Part No-64268369 , Central Box Rework Part No-64268375 , Junction Box Rework Part No-64268377 , Shifter And Harness Part No-64268605 , Sleeve Part No-64269073 , Bushing Part No-64269074 , Bushing Part No-64269075 , Bushing Part No-64269347 , Spacer Part No-64269437 , Insulator Part No-64269440 , Chain Roller Part No-64269447 , Tube Assembly Part No-64269625 , Conversion Kit Part No-64269634 , Sprocket Rework Part No-64269655 , Roller Bracket Weldt Part No-64269687 , Nylon Roller Part No-64269689 , Pin Part No-64269705 , Shaft Weldt Roller Guide Part No-64269718 , Valve Handle Steer Part No-64269754 , Pin Part No-64269823 , Pin Part No-64269824 , Sprocket Rework Part No-64278275 , Rework, O-Ring Plug Part No-64278402 , Tube Assembly Part No-64280143 , Tube Assembly Part No-64280144 , Lift Arm Machining Part No-64280156 , Link Assembly Part No-64280212 / 68107828 , Sleeve - Was 64552158 (Dupl) Part No-64280971 , Inspection Cover Part No-64281043 , Sub Plate And Bolt Kit Part No-64285005 , Rexroth Charge Valve Part No-64285006 , Manifold Lubrication Part No-64285011 , Circuit Breaker 175A, Manual Reset Part No-64285717 , Rear Box Harness Part No-64285900 , Central Box Harness Part No-64285901 , Central Box Receptacle Part No-64285902 , Front Box Receptacle Part No-64286288 , Bearing Cup Part No-64400268 , Ball Joint Part No-64400466 , Rad Hose 3/4 Part No-64400522 , Key Part No-64400771 , Key Part No-64400790 , Ring Snap Part No-64400826 , Ring Snap Part No-64400873 , Ring Snap Part No-64400881 , Ring Snap Part No-64400882 , Ring, Retaining Part No-64400886 , Ring, Snap Part No-64400888 , Pin, Cotter Part No-64400900 , Clamp, Hose Part No-64401073 , O-Ring Part No-64401585 , O-Ring Part No-64401607 , O-Ring Vicon Part No-64401615 , Set Screw Part No-64402144 , Set Screw Cone Point Part No-64402145 , Valve Part No-64402734 , Breaker Circuit 20 Amps Part No-64403019 , Terminal Part No-64403076 , Hhcs 5/16 X 1 1/2 Part No-64403599 , Hhcs 7/16 X 1 1/4F8 Part No-64403611 , Hhcs 1/4 X 1/2 C8 Part No-64403725 , Hhcs 1/4 X 2 3/4 C8 Part No-64403737 , Hhcs 5/16 X 3/4C8 Part No-64403744 , Hhcs 3/8 X 3/4 C8 Part No-64403767 , Hhcs 3/8 X 1Unc C8 Part No-64403769 , Capscrew*See T-Text* Part No-64403770 / 001554-056 , Hhcs 3/8 X 1 3/8 C8 Part No-64403771 , Hhcs 3/8 X 1 1/2 C8 Part No-64403772 , Hhcs 3/8 X 2 Part No-64403775 , Hhcs 3/8 X 3 1/2 C8 Part No-64403782 , Hhcs 1/2 X 1 1/2 Part No-64403819 , Hhcs 1/2 X 2 1/4 Part No-64403823 , Hhcs 3/4*4 1/2 C8 Part No-64403886 , Hhcs 1 X 2 C8 Part No-64403914 , Hhcs 8Mm X 25Mm 10.9 Zp Part No-64403979 , Hhcs 8Mm X 35Mmc8 Part No-64403981 , Hhcs 8Mm X 40Mmc8 Part No-64403982 , Hhcs 10Mm X 80Mm Part No-64403997 , Hhcs 12Mm X 50Mm C8 Part No-64404005 , Hhcs 16Mm X 30Mm C8 Part No-64404012 , Fhcs 10-24 X 3/4 C8 Part No-64404036 , Shcs 10Mm X 20Mm C8 Part No-64404098 , Set Screw Part No-64404133 , Rhms10-32Unf X 1/2 Part No-64404154 , Rhms10-32Unf X 1 Part No-64404157 , Rhms10-32 X 1 1/2 Part No-64404158 , Hhcs 1 X 12 Uns-Special G8 Part No-64404173 , Locknut, Stover Part No-64404225 , Stov Loc Nut 1F8 Part No-64404227 , Stov Lock Nut 3/4 C8 Part No-64404246 / 001562-010 , Stov Loc Nut 1C8 Part No-64404248 , Lockwasher Part No-64404371 , Lockwasher 5/1608 Part No-64404376 , Lockwasher 7/16 Part No-64404378 , Lockwasher 1 0808 Part No-64404384 , Lockwasher 5Mm 08 Part No-64404392 , Lockwasher Part No-64404393 , 12Mm Flatwasher Part No-64404408 / Af02300007 , 16Mm Flatwasher Rb Part No-64404454 / Af02300009 , Hhcs 12Mm X 150Mm C8 Part No-64404501 , Hhcs 24Mm X 80Mm C10.9 Part No-64404503 , Hhcs 6Mm X 40Mm Part No-64404508 , Lh Side Cutter Part No-64540264 / 9213092756-07 , Rh Side Cutter Part No-64540265 / 9213092756-06 , Canopy, Ejc-522 Part No-64543369 , Plug Part No-64543504 , Plug Part No-64543506 , Accumulator Charge Valve Part No-64544394 , Brake Valve Part No-64544448 , Hoist Cylinder Assy Part No-64544827 / Bg00845207 , Exhaust Pipe Weldment Part No-64545673 , Snubber Part No-64546399 , Oil Temp Switch Part No-64546487 , Hardened Sleeve Part No-64546893 , Filter, High Pressure Part No-64547162 , Liquid Level Gauge Part No-64547234 , Ejc 522 Steer Cylinder Assy Part No-64547295 / Bg00387256 , Piston Seal Part No-64547525 , Seal Kit, 522 Steer Cylinder Part No-64547557 , Lower Dump Cylinder Pin Part No-64547632 , Plate, Mounting Part No-64547634 , Pin - Dump Box To Rear Frame Part No-64547872 , Liguid Level Gauge Part No-64547905 , Ring - Spacer Part No-64547931 , Plate - Keeper Part No-64548043 , Shuttle Valve, #6 Sae Ports Part No-64548133 , Catalytic Muffler Part No-64548161 , Tow Pin Part No-64548257 , Connector - 2 Pin Amp. Part No-64548478 , Shcs 16Mm X 35Mm Gr. 12.9 Part No-64548691 , Setscrew, Cup Pt. 24Mm X 30Mm Part No-64548692 / Af01000392 , Machining Dump Lever Part No-64549110 , Prop Tube Machining, 522 Part No-64549148 , Mounting Block Part No-64549308 , 1/8Shim Plate Part No-64549310 , Guard, Driveline Part No-64549387 , Guard, Driveline Part No-64549389 , Guard, Driveline Part No-64549408 , Plate Part No-64550114 , Manifold Part No-64550116 , Manifold Block Part No-64550268 , Mtg Bracket Weldt, Trans Filter Part No-64551603 , Tube Assembly Part No-64551803 , Tube Assembly Part No-64551804 , Tube Assembly Part No-64551884 , Reflective Safety Tape Pur/Sold/Ft Part No-64551886 , Pump 4-Bolt C, 3.19 Cu In/Rev Part No-64552024 , Directional Control Valve Part No-64552051 , Steer Cylinder Pin, Rear Part No-64552133 , Pin - Articulation Part No-64552257 , Thrust Washer Part No-64552287 , Thrust Washer Part No-64552289 , Thrust Washer Part No-64552290 , Filter Access Cover Part No-64552297 , Pin - Front Steering Part No-64552299 , Block, Manifold, Dump/Brake Part No-64552322 , H663 04 01050 4Fj 4Fjb Part No-64552735 , H663 08 01600 8Fr 8Fra Part No-64552812 , H2661 20 00500 24Flb 20Fr Part No-64552851 , Dump Cylinder Seal Kit Part No-64552859 , Cover, Rear Part No-64552879 , Shcs 8Mm X 1.25,180Mm Part No-64552938 , H663 04 0067 4Fjb 4Fjb Part No-64555463 , H663 04 01524 4Fjb 4Fj Part No-64555465 , H663 04 01624 4Fjb 4Fjb Part No-64555466 , Special Adapter Part No-64555568 , Steering Column Part No-64555593 , Pump Tandem, Ejc - 522 Part No-64555614 , Steering Wheel, 13 Part No-64555673 , Hgh781 16 00570 16Fr 16Fr Part No-64555983 , Hgh781 16 00550 16Fr 16Fr Part No-64555984 , Contact Block 2Nc Part No-64556029 / 8002404 , Rubber Door Stop Part No-64556038 , Relay Module Part No-64556384 , Hgh663 6 00360 6Frb 6Frb 090 Part No-64556777 , C.B. 35A, Manual Reset Part No-64556962 , Relay Module Part No-64557067 , Inline Check Valve, 5 Psi Crack Part No-64557162 , Gear Shift Control Part No-64557229 , Multi-Functional Timer Part No-64557458 , Accumulator, 1 Gallon (Charged) Part No-64557971 , Harness-Limit Switch Part No-64562867 , Square Indicator Light Pb Red Part No-64563207 , Axle Cradle Machining, Part No-64564246 , Driveshaft 8 C W/Slip U-Joints Part No-64564507 , 8C Driveshaft, Ejc Part No-64564550 , Hhcs 1 1/4 X 17 1/2 Unf Part No-64564614 , Dump Box Part No-64564764 , Toggle Switch Part No-64565335 , Lockwasher Part No-64567392 , T-Bolt, 2.13-2.44 Part No-64567645 , T-Bolt, Clamp 4.13 - 4.44 Part No-64567646 , Elbow Silicon 2-90 Deg. Part No-64568686 , Flat Hex Socket Capscrew Part No-64569153 , Transmission, 6422, Ejc-522 Part No-64569193 / Bg01529719 , Hyd Connection Plate Weldment Part No-64569217 , Washer-Engine Mount Part No-64569371 , Gasket, Murphy Display Part No-64569809 , Tube Assembly Part No-64569810 , U-Bolt (5/16-18) Part No-64570426 , Oil Temp Gauge Part No-64572287 / 64120192 , Oil Pressure Gauge Part No-64572293 / 682460 , Pressure Manifold Part No-64573294 , T-Bolt Clamp, 3.63 - 3.94 Part No-64573745 , Tube Assy Part No-64573956 , H781 12 00720 12Fr12 12Fr12 Part No-64574266 , Divider Assy-Master Part No-64574491 , Divider Assy-Secondary Part No-64574493 , H663 04 02000 4Fj 4Fj Part No-64574563 , H663 04 00480 4Fj 4Fjb Part No-64574564 , H663 04 00440 4Fj 4Fjb Part No-64574565 , H663 04 00270 4Fj 4Fjb Part No-64574566 , H663 04 00430 4Fj 4Fjb Part No-64574567 , H663 04 00840 4Fj 4Fja Part No-64574568 , H663 04 00900 4Fj 4Fj Part No-64574569 , H663 04 00800 4Fj 4Fj Part No-64574570 , H663 04 01040 4Fj 4Fj Part No-64574571 , H663 04 00840 4Fj 4Fj Part No-64574572 , H663 04 00660 4Fj 4Fj Part No-64574573 , Faceplate Part No-64574633 , Faceplate Part No-64574634 , 10Mm Tube Assy Part No-64574641 , 16Mm Tube Assembly Part No-64575207 , 16Mm Tube Assembly Part No-64575211 , Guard Part No-64575335 , Guard Part No-64575383 , Hgh781 04 00800 4Frb 4Frb Part No-64575652 , Hgh781 04 00140 4Frb 4Frb Part No-64575655 , Hgh781 12 01000 12Fr 12Frb Part No-64575705 , Hydraulic Tank Weldment-Steel,522 Part No-64577072 , Hydraulic Tank Group-Steel Part No-64577073 , Bar, Artic Lock Part No-64577397 , Pin, Lock Bar Part No-64577403 , Capscrew Part No-64578056 , Low Hyd Oil Sensor Part No-64579267 / Bg00668685 , Thrust Washer Part No-64579363 , Hhcs 20Mm X 40Mm Part No-64579389 , Tube Weldt Part No-64579664 , Bracket, Mtg Part No-64579665 , Tube Part No-64579678 , Cartridge Part No-64580612 / 64120094 , Front Frame Machining Part No-64581682 , Engine Mount, Rear Left Part No-64581766 , Engine Mount, Rear Right Part No-64581804 , Spacer - Fan Mbenz, 522 Part No-64581900 , Pump, Brake Cooling - 522 Mbenze Part No-64581937 , Tank, Expansion L&M Part No-64582503 , Tube, Radiator Supply Part No-64582585 , Transmission Cooler Part No-64582637 , Tube, Cac Inlet Part No-64582641 , Pipe, Return-Cac Part No-64582642 , Silicon 4-Ply, Connector, 3.5 Id Part No-64582804 , Silicon Connector, 3.5 Id X 3.5 Part No-64582822 , 140 Amp 24V Alternator Part No-64583761 , 4 45 Deg Elbow (Exhaust) Part No-64583839 , Fan, Suction 32 Dia - 522 Part No-64583930 , Belt, Serpentine - 522 W/O A/C Part No-64584024 / 69043443 , 522 Mbenz Alternator Pulley 2.93 Part No-64584043 , Tube Assy Part No-64584175 , Converter, Cl8572, Ejc 522 Part No-64584203 / Bg00334323 , Pipe, Return-Cac Part No-64584271 , Operator Comparmt-522 Mercedes Part No-64584277 , Cooling Shroud Weldt - 522 Mbenz Part No-64584462 , Grill Assembly, Front Part No-64584640 , Support Bracket, 3.5 Tube Part No-64584718 , Seat, Assy - Vinyl Part No-64584784 , Instrument Panel Group Part No-64585167 , Instrument Panel Assembly Part No-64585169 , Enclosure Part No-64585171 , Front Box Harness Part No-64585176 , Door Weldment, R/H Outrigger Part No-64585386 , Door Weldment, R/H Outrigger Part No-64585392 , Cover Weldment, Engine Part No-64585395 , Cover Part No-64585396 , Cover Part No-64585400 , Cover Part No-64585418 , Cover Part No-64585420 , Cover Part No-64585422 , Hood Part No-64585453 , Tube Assy-Tank,Return Part No-64585755 , Tube Assy-Brk Cool Return Part No-64585760 , Tube Assy-Brake Pressure In Part No-64585761 , Tube Assy-Pressure In Part No-64585762 , Tube Assy-Pilot Pressure Part No-64585763 , Hgh781 06 00520 6Fr 6Frb Part No-64585811 , Bracket Part No-64585901 , Upper Belt Guard Weldment Part No-64585903 , Valve, Brake Relay - 1700 Psi Max Part No-64585926 , Exhaust Cover Weldment Part No-64586150 , Welding Assembly Part No-64586211 , Pipe Part No-64586468 , Valve, Shuttle Part No-64586473 , Hgh781 06 01840 6Frb 6Fr Part No-64586534 , Manifold, 522 Accumulator Part No-64586795 , Tube Assembly Part No-64586802 , Tube Assembly Part No-64587077 , Tube Assembly Part No-64587080 , Tube Assembly, Filter Part No-64587111 , Tube Assembly Part No-64587957 , Weldment, Filter Bracket Part No-64587964 , Tube-Scavenge Pump To Filter Part No-64588123 , Bracket, Clamp-Trans Line Part No-64588238 , Manifold, 2-Port Part No-64588339 , Brkt Weldt, Clamp-Trans Ln Part No-64588413 , Bracket, Oil Dip Stick Part No-64588783 , Hgh781 08 01850 8Fr 8Fra Part No-64589132 , Hgh781 06 01210 6Fr 6Frb Part No-64589133 , Hgh781 06 01540 6Fr 6Frb Part No-64589143 , Hgh781 06 00270 6Fr 6Frb Part No-64589153 , Hgh781 06 01570 6Fr 6Frc Part No-64589172 , Hgh781 06 01850 6Fr 6Frb Part No-64589183 , Hgh781 08 02070 8Fr 8Frb Part No-64589203 , Hgh781 06 01580 6Fr 6Frb Part No-64589220 , Hgh781 04 01290 4Fr 4Frb Part No-64589309 , Hgh781 04 00370 4Fr 4Frb Part No-64589313 , Hgh781 06 00390 6Frb 6Frb Part No-64589585 , Hgh781 06 00300 6Frb 6Frc Part No-64589586 , H2661 32 00700 32Fl 24Flb Part No-64589701 , Weldment Cover Part No-64589897 , Weldment, Access Door Part No-64590118 , Radiator, Mercedes Engine (69041324 + 69041325) Part No-64590898 , Weldt, Support Bracket Part No-64590976 , Hgh781 06 00270 6Frb Part No-64591100 , Hgh781 04 00360 4Fr 4Frb Part No-64591103 , Hgh781 04 00310 4Fr 4Frb Part No-64591105 , Decal Ejc 30Sx 175Mm Part No-64591667 , Disconnect Faceplate, 522 Mbenz Part No-64592120 , Decal_Sandvik_Logo_210Mm Part No-64592181 , Hgh663 08 01820 8Fr 8Frb Part No-64592238 , Hgh663 08 01980 8Fr 8Fra Part No-64592257 , Hgh2661 12 00900 12Fra 12Frc Part No-64592316 , Hgh781 06 00800 6Fr 6Fra Part No-64592333 , Hgh781 06 00780 6Fr 6Fra Part No-64592334 , Tube, Return-Trans Cooler Part No-64594710 , Tube, Supply-Trans Cooler Part No-64594711 , Tube, Radiator Inlet Part No-64594768 , Coolent Hose Vibra Flex Part No-64594931 , Hgh781 12 00300 12Fr 12Frb Part No-64596357 , T-Bolt Clamp 5 1/2 Part No-64596769 , Mtg Bracket Weldment - Air Intake Part No-64596935 , Hgh781 12 00490 12Fjb 12Fjb 60 Part No-64597162 , Hgh663 08 01820 8Fr 8Frb Part No-64597281 , 7C Driveshaft, Ejc 522 Part No-64599337 , Hgh781 04 00194 4Frb 4Frc Part No-64603238 , Hgh781 04 00300 4Fr 4Frb Part No-64603242 , Hgh663 06 00660 6Fr 6Frb Part No-64603259 , Hgh781 04 01980 4Fr 4Fra Part No-64603262 , Hgh781 08 01340 8Fr 8Frb Part No-64603292 , Hgh781 08 01354 8Fr 8Frc Part No-64603294 , Hgh781 08 01320 8Fr 8Frb Part No-64603295 , Hgh781 04 00200 4Frb 4Fr Part No-64603296 , Hgh781 08 00340 8Frb 8Frc 180 Part No-64603297 , Hgh781 08 00350 8Frb 8Frc 180 Part No-64603298 , Hgh194 20 00592 20Fr 24Flb Part No-64603397 , Hgh194 20 00390 20Fr 20Frc Part No-64603398 , Hgh194 20 00360 20Fr 20Frc Part No-64603401 , Hgh194 20 00594 20Frb 20Frb Part No-64603403 , Hgh781 06 01050 6Frb 6Frb 180 Part No-64603404 , Rim Only Part No-64624906 / 64280228 , Clamp, Hose Part No-64800006 , 1/8 Npt Grease Fitting Part No-64800138 , Cotter-Hair Pin Part No-64800236 , Cotter, Hair Pin Part No-64800237 , S S Hose Clamp 13/16-1 1/2 Part No-64800307 , Test Block-4Bolt Split Fl Conn Part No-64801325 , Strainer Suction Part No-64802277 , Gasket Pump Part No-64802577 , Breaker Circuit 70 Amps Part No-64802737 , Switch, Pressure 150 Psi - Nc Part No-64802824 , Ring Steer Cylinder Pin Part No-64802931 , O-Ring Part No-64803020 , Keeper-Pin Part No-64803734 , U-Joint Part No-64803751 , Pump, Charge, Converter Part No-64803768 , Switch, Battery Part No-64804229 , Gasket Pump Part No-64804339 , Cap Assly Part No-64804353 , Spacer Part No-64804681 , Steering Cylinder Pin Part No-64805348 / 975-450031 , Park Brake Valve Assly Part No-64805648 / 975-630317 , U Bolt Set Part No-64805769 / 975-940011 , Joint Bearing Part No-64805770 / 80369339 , Driveline 975-940331 Part No-64805863 , Spider Assembly Part No-64806120 , Check Valve Part No-64806227 / G4n3041-0005 , Relief Valve Part No-64806237 / G4n3041-0007 , Spider Assembly Part No-64806419 , Seal Kit Part No-64845505 , Spider Assembly Part No-65070520 , Mounting Center Bonded Part No-65083455 , Governor Part No-65363039 / 980630012 , Valve, Wheel Part No-65392009 , Spud, Valve Part No-65392047 , Spacer, (Steering Cyl.) Part No-65399056 , Service Kit (For 911-31010) Part No-65531020 , Sprocket Part No-65531028 , Kit, Service Part No-65534033 , Seal Kit Part No-65534034 , Roller (65561106) Part No-65561107 , Shaft Part No-65561108 , Bracket Part No-65561109 , Gasket, Pump Part No-65612028 , Spider Assemblysee Notes (T) Part No-65615053 , Gasket Part No-65625086 , Gasket 912 Pump Drive Part No-65631025 , Gauge & Hose Assy, Charging (Ejc88) Part No-65664005 , Element Kit, Trans. Filter Part No-65812024 , Lock Collar Part No-65850143 , Valve, Check Part No-65863028 , Pin, Lower Articulation Part No-68055233 , Driveline Convertor To Gearbox Part No-68055308 , Bearing Radial Ball Part No-68057635 , Spacer Cable Drum Part No-68059227 , Spacer Cable Drum Part No-68059235 , Switch Temperature Part No-68059821 , Clamp Part No-68059920 , Clamp Part No-68066966 , Bearing, Radial Ball 60Mm* Part No-68069978 , Shaft, Stub Part No-68069986 , Seal Kit, 6 Cylinder Part No-68073988 , Seal Kit, 3.5 Cylinder Part No-68074218 , Filter Hyd Return Part No-68081775 , Axle, Front Part No-68082252 , Belt Set Part No-68082914 , Bushing, Articulation Part No-68083060 , Pump Hydraulic Cooling System Part No-68083086 , Bushing Part No-68083110 , Pin Lift Arm Part No-68083128 , Pin Pivot Part No-68083151 , Pump Hydraulic Part No-68083169 , Valve Foot Paddle Part No-68083276 , Filter Hyd Suction Part No-68083284 , Pin, Dump Cylinder Part No-68083664 , Plate, Lock Part No-68083946 , Switch, Pressure Part No-68084001 , Pin Part No-68084142 , Coupling Adopter Part No-68084183 , Pin Part No-68084373 , Yoke Part No-68084407 , Driveline, Rear Part No-68084456 , Driveline, Front Part No-68084761 , Valve, Horsepower Override Part No-68085313 , Valve, Shuttle Part No-68085321 , Bucket Lip Part No-68089745 , Sleeves, Lift Arms Part No-68090099 , Sleeve Link Part No-68091246 , Link Dump Part No-68091253 , Pin, Link Part No-68091261 , Clamp Part No-68091386 , Clamp Part No-68091394 , Bushing Pump Sleeve Part No-68092665 , Pin Part No-68092806 , Tube Assly Part No-68092848 , Tube Assembly Brazed Part No-68092855 , Sprocket Part No-68092905 , Switch, Keyless Start Part No-68093325 , Manifold Hydraulic Part No-68093606 , Tube Assembly Part No-68093622 , Tube Assembly Part No-68093838 , Tube Assembly Part No-68094257 , Tube Assembly Part No-68094273 , Tube Assembly Part No-68094505 , Tube Assembly Part No-68094513 , Tube Assembly Part No-68094778 , Tube Assembly Part No-68095239 , Alternator Part No-68098639 , Seal Kit, Lift Cylinder Part No-68099694 , Shim Part No-68102142 , Shim Part No-68102159 , Orbitol Valve Assly Part No-68103504 / 975-450193 , Stop Assembly Part No-68109931 , Releif Valve, Port Part No-69003582 , Relief Valve, Main Part No-69003584 , Seal, Pocket Part No-69003676 , Seal Lip Part No-69003729 , Lubrication Fitting Part No-69003887 , Ss Wire Part No-69004119 , Element, Fuel Prefilter Part No-69005107 , Gasket Part No-69008272 , O-Ring Part No-69008788 , Element, Filter Part No-69008925 , Oil Seal Part No-69010017 / F2nf65015 , Oil Seal Part No-69010023 / F2nf65121 , Control Valve Switch Part No-69010040 / F2nf91001 , Yoke Fittings Part No-69010133 / F2n4001446 , Flange Part No-69010137 / F2n 4001496 , Gasket Part No-69010150 / F2n4001910 , Clutch Plate Part No-69010164 , Elbow 90 Part No-69010167 , Dip Stick Part No-69010169 / F2n4003308 , Tube Part No-69010170 / F2n 4003309 , Element, Filter Part No-69010177 , Base Filter Part No-69010178 / F2n 4003488 , Seal Leather Cut Part No-69010287 / F2n4045236 , Disk Plate Part No-69010313 / F2n 4046693 , Seal Kit Part No-69011309 , Kit Relief Valve Part No-69011310 , Seal Kit Part No-69011311 , Pin, Cotter Part No-69011321 , Spring Part No-69011322 , Pin, Detent Part No-69011323 , Bracket Handle Part No-69011330 , Pin, Handle Part No-69011331 , Seal, Spool Part No-69011332 , Handle Assembly Part No-69011499 , Check Poppet Part No-69013493 , Tube Part No-69013764 , Capscrew Part No-69013800 , Cap, 2 3/4 (7 Psi) - For 64582503 Part No-69013828 , Retainer, Tube Part No-69013831 , Washer Cupped Part No-69013832 , Seal Kit Part No-69014470 , Lining Kit Part No-69014484 , Lining Assembly Part No-69014492 / M2m29-010-085 , Back Up Ring Part No-69014530 / M2m32-630-173 , O Ring Part No-69014531 / M2m32-630-174 , Spring Bellville Part No-69014541 / M2m33-155-015 , Regulator Voltage, 24 Volt Part No-69014658 , 100V,35Amp Bridge Rectifier Part No-69015862 , Head Assey Part No-69016565 , Screen Part No-69016566 , Ring Sealing Part No-69017820 / 69017842 , Flange Companion Part No-69018594 / S2t22329 , Sleeve Yoke Part No-69018595 / S2t23128kx , Shaft Yoke Part No-69018598 / S2t28258x , Flange, Companion Part No-69018604 , Gauge Pressure Part No-69018707 , Switch, Vacuum Part No-69018713 , Seal Kit, Filter Part No-69018714 , Seal Kit Filter Part No-69018715 , Gauge, Pressure Part No-69018716 , Gauge Vaccum Part No-69018721 , Spider Assy Part No-69018900 , Rod End Part No-69021564 / 67412197 , Cartridge Sleeve Part No-69021593 / 67412721 , Repair Kit ( For 64118023) Part No-69021603 / 67412077 , Service Kit Part No-69021604 / 67410743 , Strco Ground Fault Relay Part No-69021672 , Air Cleaner Part No-69022451 , Repair Kit Part No-69022710 , Yoke Part No-69025001 , Stud Part No-69026901 , Slip Yoke Part No-69026960 , Primary Filter Element Part No-69029995 , Master Lockout Switch Part No-69031579 , Safety Filter Element Part No-69032289 , Insert Assembly Part No-69032368 , Bypass Assembly Part No-69032372 , Circuit Breaker Part No-69032916 , Vaccum Starter Part No-69032934 , Zero Sequence Ct Part No-69032935 , Wrench, Filter Collar Part No-69032991 , O-Ring Part No-69034204 , Seal Kit Part No-69034206 , End Cover Part No-69034212 , End Cover Part No-69034213 , Plug Part No-69034217 , Shock And Suction Valve Assy Part No-69034218 / 4900227 , Spring Guide Part No-69034221 , Drive Screw Part No-69034222 , Plug And O-Ring Part No-69034229 , Counter Pressure Valve Complete Part No-69034233 , Ball Bearing Part No-69034266 , Spring Kit Part No-69034269 , R/B 69034313 Service Kit Part No-69034313 / 69035196 , Rim Weldt 416 (Gkn) Part No-69034429 , Installation & Removal Tool For 64582637 Part No-69034842 , Seal, Retaining Tool (For 64582637) Part No-69034843 , Valve Extension Part No-69034983 , Gf Reset Light Pad Part No-69035018 , Reset Button Part No-69035022 , Repair Kit Part No-69035080 , Repair Kit, Park Brake Part No-69035097 , Rubber Gasket Part No-69035533 , Sponge Vci-101 Part No-69035534 , Gasket (For 64582637) Part No-69035578 , Base Assembly Part No-69035611 , Pedal Assembly Part No-69035612 , Seal Kit Part No-69035624 , O-Ring Part No-69036436 , Valve Assembly Part No-69036481 , Sensor Kit Part No-69036542 , Lining Kit Part No-69036674 , Repair Kit Part No-69036892 , Filler Cap Part No-69037071 , Oring Part No-69037650 , Seal Kit Part No-69038438 , Bearing Flange Part No-69039040 / 69040375 , Differential Part No-69039943 , Reverse Phase Relay Part No-69040148 , Fuse Seconadry Part No-69040151 , Solenoid 24 Vdc - Was 69040266 (Dupl) Part No-69040257 , Stud Assy Part No-69040261 , Axle Housing Part No-69040317 , Piston Part No-69040331 / 69039006 , Diff Side Gear Part No-69040355 / Bg00323308 , Lock Plate Part No-69040366 , Spherical Plain Shaft Bushing Part No-69040396 , Back Cover Part No-69040923 , Seat Cover Part No-69040924 , Lh Armrest Part No-69040925 , Rh Armrest Part No-69040926 , Wing Nut Part No-69040986 / 69041329 , Repair Kit Part No-69041037 , Adm 18 Pin Connector Part No-69041292 , Adm 15 Pin Connector Part No-69041293 , Adm 12 Pin Connector Part No-69041294 , Terminal (Female Socket) Part No-69041295 , Connector, 14 Pin Part No-69041303 , Aftercooler Assembly Part No-69041324 , Radiator Assembly Part No-69041325 , Fan Shroud Part No-69041326 , Fan Guard Standard Part No-69041327 , Fan Ring Part No-69041328 , Tubes, V-Fin Its Part No-69041331 , Water Pump - Reman Only Part No-69041377 , Boost Sensor Part No-69041378 / 56018249 , Boost Sensor O-Ring Part No-69041379 , Thermostat Part No-69041381 / 56012788 , Fuel Supply Pump Part No-69041382 , Fuel Pump Gasket Part No-69041383 , Engine Wiring Harness Part No-69041384 , Oil Filter Element Part No-69041385 / 69042849 , Belt Tensioner Part No-69041386 , Fuel Temp Sensor Part No-69041389 / 56018247 , Water Temp Sensor (Old Part No.69041391) Part No-69041390 / 56012789 , Tubes, V-Fin Its Part No-69041431 , Cover Part No-69041439 , Cover Part No-69041440 , Switch, Lighted Pb (Red) Part No-69043359 / 64118786 , O-Ring Part No-69043404 , Piston 929 Part No-69043750 , Gasket Part No-69043928 , Valve, Relief Part No-69043929 , Gasket Part No-69043930 , Stud Part No-69043932 , Seal Ring Part No-69043936 , Injector Part No-69043937 , Gasketrb Part No-69043942 / 69044288 , Seal Part No-69043950 , Gasket Part No-69043952 , Gasket Part No-69043953 , Gasket Head Part No-69043959 , Gasket Part No-69043978 , Water Pump Part No-69044015 , Pump Dupl 04521075,04521125,04521264 Part No-69063390 , Pin Part No-70012234 , Pin Part No-70012293 , Piston Part No-70130094 , Bushing Part No-70180417 , Protector Part No-70271555 , Section Part No-70290551 , Plate Part No-70300878 , Flange Part No-70361520 , Front Flange Part No-70361766 , Rear Flange Part No-70361847 , Stop Part No-70420376 , Shim Part No-70430555 , Box Part No-70470186 , Plate Part No-70533831 , Plate Part No-70533850 , Plate Part No-70533964 , Plate Part No-70533977 , Plate Part No-70533993 , Plate Part No-70534368 , Plate Part No-70534375 , Plate Part No-70534459 , Yoke Part No-70541195 , Outrigger Part No-70570114 , Bracket Part No-70594604 , Support Part No-70595010 , Support Part No-70595061 , Support Part No-70595171 , Support Part No-70595405 , Support Part No-70600409 , Lever Part No-70630937 , Connection Rod Part No-70640365 , Union Part No-70801049 , Union Part No-70801050 , Union Part No-70801062 , Union Part No-70801102 , Union Part No-70801160 , Union Part No-70801181 , Union Part No-70801255 , Strap Part No-70810242 , Strap Part No-70810258 , Pipe Part No-70821126 , Manifold Part No-70821219 , Stinger Part No-70850090 , Stinger Part No-70850197 , Spring Part No-70880268 , Spring Part No-70880271 , Rail Part No-70900074 , Rail Part No-70900157 , Rail Part No-70900158 , Decal Part No-70961768 , Decal Part No-70961816 , Decal Part No-70961822 , Decal Part No-70961830 , Decal Part No-70961908 , Decal Part No-70961945 , Decal Part No-70961989 , Decal Part No-70961994 , Decal Part No-70962019 , Brake Cylinder Part No-71055093 , Service Kit Part No-71064050 , Regulator Part No-71064052 , Brake Disc Part No-71081402 / 88206919 , Diesel Engine Bf4l2011 Part No-71195664 / 71195664Re , Bushing Part No-71402450 , Tire,Tube With Flappe Part No-73101569 , Tire Valve Part No-73101662 , Bushing Part No-73213072 , Cup Part No-73270300 , Flange Part No-73360920 , O Ring Part No-73414039 , O Ring Part No-73414212 , O Ring Part No-73414586 , O Ring Part No-73414772 , O-Ring Part No-73415042 , Bushing Part No-73415166 , Guide Bushing Part No-73417220 , Oil Tank Part No-73491501 , Lock Plate Part No-73711014 , Seat Part No-73790503 , Elbow Part No-73802809 , Union Part No-73803420 , Union Part No-73809804 , Purifier Part No-73833001 , Suspension Part No-73880126 , Support Part No-73880140 , Bit-Cone Part No-73941060 , Decal Rb Part No-73960100 / 20726948 , Cable Terminal Part No-74010302 , Working Light Part No-74011401 / 009662-001 , Extension Cable Part No-74014001 , Connector Part No-74016003 , Pulley Part No-74021063 , Sight Indicator Part No-74022007 , Electric Motor Part No-74031816 , Electric Motor Part No-74031828 , Brass Plug Part No-74032504 , Brass Plug Part No-74032508 , Brass Plug Part No-74032520 , Brass Lock Nut Part No-74032544 , Lock Nut Part No-74032548 , Brass Lock Nut Part No-74032564 , Reducer Part No-74032616 , Reducer Part No-74032625 , Reducer Part No-74032628 , Reducer Part No-74032634 , Fruse Holder Part No-74033004 , Electric Cable Part No-74033125 , Wire Part No-74034360 , Wire Part No-74034362 , Wire Part No-74034364 , Wire Part No-74034370 , Wire Part No-74034372 , Wire Part No-74034373 , Wire Part No-74034374 , Sheath Part No-74038310 , Sheath Part No-74038312 , Cap Part No-74038322 , Wire Assy Part No-74038331 , Wire Assy Part No-74038332 , Seal Part No-74038342 , Body Part No-74038351 , Section Part No-74038352 , Sleeve Part No-74038360 , Selector Switch Part No-74080380 , Relay Part No-74130800 , Relay Part No-74130804 , Plate Part No-74165002 , Seal Part No-74194560 , Plug Part No-74194570 , Seal Part No-74194580 , Gland Part No-74196131 , Hood Part No-74196416 , Hood Part No-74196484 , Hood Part No-74196486 , Union Part No-74196541 , Cable End Fitting Part No-74200932 , Profile L=2000 Part No-74201362 , Fixing Plate Part No-74201365 , Profile U Part No-74201369 , Contactor Part No-74201549 , Contactor Part No-74201621 , Switch Block Part No-74202240 / 77005788 , Locking System Part No-74202250 , Block Part No-74202260 , Block Part No-74202261 , Contactor Part No-74202290 , Contactor Part No-74202294 , Bushing Part No-75212026 , Guide Part No-75463195 , Piston Rod Guide Ring Part No-75463229 , Rod Part No-75625845 , Spring Part No-75880010 , Articulation Part No-76130120 , Cylinder Part No-76317082 , Cylinder Part No-76318350 , Cylinder Part No-76322158 , Rotary Actuator Part No-76350010 , Seal Kit ( 84314300) Part No-76350050 , Bushing Kit (84314300) Part No-76350051 , Check Valve Part No-76350074 , Seal Kit Part No-76350075 , Bushing Kit Part No-76350076 , Cable Reel Part No-77005176 , Charging Valve Part No-77005272 , Cap Part No-77005545 , Valve Section Part No-77005567 , Electric Motor Part No-77005751 , Harness Assy Part No-77005780 , Illuminated Push Button Part No-77005825 , Moto Pump Group Part No-77006035 , Pin Part No-77006544 , Hex Jam Part No-77006545 , Pin Part No-77006547 , Cover Part No-77007057 , Control Valve Part No-77007142 , Pin Part No-77007219 , Seal Part No-77007229 , Cradle Assembly Part No-77007230 , Shim (Kit) Part No-77007296 , Shim (Kit) Part No-77007303 , Rod Part No-77007309 , Yoke Part No-77007317 , Differential Assy Part No-77007342 , Crown Wheel Part No-77007343 , Crown Wheel Part No-77007344 , Overcenter Valve Part No-77007356 , Radiator Part No-77007540 , Repair Kit Part No-77007730 , Bracket Part No-77007849 , Coupling Part No-77007967 , Shim Kit Part No-77008135 , Shaft Part No-77008151 , Gear Part No-77008152 , Breather Part No-77008155 / Bg00575681 , Seal Part No-77008156 , Flange Part No-77008159 , Roller Bearingrb Part No-77008161 / 77019792 , Shaft Part No-77008168 , Shaft Part No-77008169 , Extension Sleeve Part No-77008171 , Gear Part No-77008174 , Gear Part No-77008176 , Gear Part No-77008177 , Accelerator Pedal Part No-77008675 , Plug Connector Part No-77009084 , Axle Lockating Pin Part No-77009601 , Guide Roller Part No-77010549 , Bearing Part No-77010898 , Hood Part No-77011111 , Clogging Indicator Part No-77011124 , Flange Part No-77011209 , Electric Plug Part No-77012382 , Electric Plug Part No-77012383 , Collar Part No-77013292 , Flange Part No-77013293 , Housing Part No-77014814 , Shaft Part No-77014815 , Piston Sleeve Part No-77014817 , Cap Part No-77014818 , Hardware Kit Part No-77015441 , Collar Part No-77018915 , Coupling Kit Part No-77019746 , Differential Housing Part No-77021598 , Plug Part No-77722515 , Valve Part No-77722527 , Cartridge Part No-77722530 , Sequence Valve Part No-77722536 , Valve,Check Part No-77722540 / Bg01389524 , Cartridge Part No-77722541 , Cartridge Part No-77722542 , Cartridge Part No-77722545 , Valve Part No-77722547 , Valve Part No-77722548 , Cartridge Part No-77722551 / 77722558 , Relief Valve Part No-77722569 , Body Part No-77722713 , Valve Bank Part No-77790126 / 81816219 , Regulator Part No-77791511 , Rod Kit Part No-77791652 , Spool Part No-77793060 , Control Valve Part No-77793106 / Bg00708183 , Hydraulic Pump Part No-77794205 , Boom Armature Part No-78001181 , Boom Kit Part No-78003053 , Swivel Part No-78006207 , Divergence Part No-78010387 , Boom Swing Assembly Part No-78011265 , Front Head Part No-78050311 , Drilling Cradle Part No-78060481 , Fruel Tank Part No-78140216 , Oil Tank Part No-78140296 , Oil Tank Part No-78140325 , Hydraulic Tank Part No-78140326 , Gauge Part No-78144079 , Coupling Part No-78170147 , Direction Axera/Robolt 05 Part No-78203007 , Instrument Panel Part No-78260971 , Box Part No-78260973 , Operator Compartment Part No-78261111 , Safety Canopy With Cylinders Part No-78280963 , Cylinder Part No-78310107 , Cylinder Part No-78310162 , Cylinder Part No-78310164 , Cylinder Ni/Chromium Part No-78310171 , Sequence Valve Part No-78320319 , Flow Divider Part No-78320457 , Check Valve Assy Part No-78320498 , Flow Controler Part No-78320548 , Wire Assy Part No-78332111 , Voltage Frequency Adaptation Kit Part No-78336060 , Electric Harness Part No-78337106 , Kit Modification Part No-78402192 , Driveline Part No-78410323 , Relief Valve Part No-78410369 , Electric Panel Part No-78470094 , Beam Cc2512 Lefrt Part No-78511169 , Front Head Body Part No-79290071 , Valve Body Part No-79290083 , Front Head Part No-79290121 , Flange Part No-79360066 , Box Part No-79470129 , Beam Cc2512 Left Part No-79510371 , Bolster Part No-79520066 , Yoke Part No-79540106 , Cradle Support Part No-79590294 , Purifier Part No-79820516 , Pipe Part No-79820532 , B26 Left Armaturetube Part No-79820629 , Gas Valve Part No-80759069 , Cover Part No-81602109 , Union Part No-81672639 , Seal Picker Part No-83371099 , Cap Part No-85168219 , Regulator Part No-85798799 / 77722574 , Glue Part No-86982219 , U-Seal Part No-87218939 , Field Service Tools (See Kit List) Part No-88081719 , Seal Kit Part No-88253109 , Plug Part No-88538389 , 4-Pin Receptacle Kit Part No-88730459 , Seal Kit Part No-88748869 , Bearing Cone Taper Roller Part No-001019-002 / 4694472 , Sight Glass (Was Dupl 69014121) - For 64582503 Part No-021740-069 , Breaker Trip.Block Part No-74205210K / 74205210 , Coupling Part No-Bg00624788 , Wheel Part No-Bt00013813 , Blunt /Moil Point Part No-634 / 33143508 , Spool Part No-4696427 , Special Tool Kit Part No-55047973 , Air Filter Part No-55071773 , Safety Cartridge Part No-55071791 , Pressure Gauge Part No-55181316 / 55212540 , Barrel Weldt. Part No-64257409 , Roller Part No-64269721 , Adapter Block, 32Sf To 16Npt Part No-64550607 , Axle Cradle Group Part No-64564245 , Cover Weldment Part No-64586184 , Bracket, Fuel Water Sep. Weldt Part No-64587069 , Exhaust Cover Part No-64591256 , Valve, Steering Part No-64802776 , Assy.Steam Part No-69010109 , O Ring Part No-69010123 / F2n 4001216 , Belt Part No-71191343 , O Ring Part No-73415112 , Nut Part No-73692722 , Screw Part No-73703908 , Allen Screw Part No-73703930 , Allen Screw Part No-73703935 , Screw Part No-73703950 , Allen Screw Part No-73703958 , Air Filter Part No-73831112 , Return Filterassembly Part No-73833203 / 52701 , Union Part No-74196512 , Fremale Plug Part No-74196583 , Rail Part No-74196620 , Cylinder Part No-76310069 , Cylinder Part No-76322104 , Seal Part No-77006484 / 69035557 , Seal Part No-77006485 / 77007704 , Stop Part No-77007318 , Wiring Harness Assembly Part No-77007839 , Magnet Plug Part No-77008165 / 71081344 , Plug Part No-77008166 / 88201569 , Oil Filter Part No-77018784 / 73832429 , Cylinder Head Part No-77760682 , Wire Assy Part No-78332132 , Seal Cut (Jack ) Part No-78402210 , Pressure Filter Part No-81558479 , Breather Part No-85079409 , Valve Pressure Relief Part No-Bg00342122 / 55155215 , 500 Hrs Service Part No-Bg00774191 , 1000 Hrs Service Part No-Bg00774192 , 4000 Hrs Service Part No-Bg00774231 , Adaptation Kit Ctn10 Part No-Bt00008775 , Terminal Nut Part No-70690411 , Threaded Rodd6 Part No-72207006 , Cooler Fan Part No-77014052 , Screw Part No-71190636 , Nut Part No-4697172 , Transmission Filter Part No-4698884 , O-Ring Part No-4700379 , Pressure Switch Part No-8000116 / 87025509 , Selector Switch 3 Pos Part No-8000949 / 56043026 , Hornpart No-8001019 , Straight Plug Wire Assy. Part No-4694318 , Wire Part No-20641008 / 55038476 , Wire Part No-20641128 / 55038478 , Wire Rope Pull Part No-55038500 , Wire Rope Part No-55038501 , Valve, Directional Part No-Bg00405398 , Bearing, Radial Ball 105Mm Part No-64101548 , Throttle Pedalpart No-64132177 , Rubber Reducing Elbow 7-5 Part No-64133037 , Valve Part No-64544448 , Belt, Serpentine-522 W/O A/C Part No-64584024 / 69043443 , Instrument Panel Part No-64585169 , T-Bolt Clamp 5 1/2 Part No-64596769 , Tramming Light Part No-88595609 , Pressure Gauge Part No-89592989 / 55055783 , Hose Part No-89554999 , Brake Disc Part No-88206919 , Elbow Part No-85267219 / 81744279 , Double Lock Washer Part No-85274759 , Double Lock Washer Part No-85128339 / Af03000036 , Plastic Pipe Part No-85200299 , Double Lock Washer Part No-85106809 / Af03000032 , Lock Nut Part No-81780789 / Af02000009 , Hose Assy Part No-81689069 , Hexagon Head Screw Part No-80082429 / Af00100735 , Plastic Hose Part No-80315239 , Hexagon Head Screw Part No-80046049 / Af00100526 , Hexagon Head Bolt Part No-80054749 / Af00101443 , Hexagon Head Bolt Part No-80054879 / Af00101444 , Hexagon Head Screw Part No-80019409 / Af00100734 , Hexagon Head Screw Part No-80019659 / Af00101123 , Regulator Part No-77794260 / 55084176 , Seal Kit Part No-77790091 , Filter Element Part No-77720380 , Relay Supporting Box Part No-77012391 , Shrink Plastic 74038441 Part No-74038441 , Repair Kit Part No-67412077 , Screw Part No-73703034 , Screw Part No-73702612 , Screw Part No-73700613 , Hex Screw Part No-20775288 , Pully Part No-26326028 , Skid Support Part No-26337508 , Skid Part No-26337628 , Buffer Part No-26363418 , Frame Platepart No-32512498 , Jaw Part No-26393408 , Oil Filter Part No-26500298 , Slipper Pad Part No-33001698 , Nut Part No-28922128 , Guide Piece, Part No-33191231 , Guide Piece, Part No-33191232 , Hose Reel Assy Part No-35221208 , Washer Part No-42807448 , Hexagon Head Bolt Part No-44222170 , Hexagon Head Bolt Part No-44266520 , Hex Socket Set Screw Part No-44585470 , Screw Part No-45533290 , Double Lock Washer Part No-55013061 , Wire Rope Part No-55038500 , Screw Part No-56017321 , Filling Cap Part No-56012766 , Fan Part No-55155435 , Switch Part No-56043026 , Solenoid Part No-56024134 , Light Part No-56209698 , Light Part No-56209700 , Nipple Part No-57210240 , Dipstick Part No-56012796 , Flexor Part No-73226092 , Oil Pr. Sensor Assy. Part No-64588328 , Spring Part No-71081562 , Filter Element Part No-64112936 , Fuse 500A With Fuse Block Part No-64119469 , Adapter 90 Deg Ors/Sae O-Ring Part No-64119651 , Adpater Ors/Sae O-Ring Boss Part No-64119792 , Adpater Ors/Sae O-Ring Boss Part No-64119800 , Oil Temp Gauge Part No-64120192 , Push Button, Amber Part No-64120424 , Circuit Breaker 20A Part No-64120773 , Adpater 90 Deg Ors/Ors Part No-64123028 , Valve 2 Pos, 2 Way Part No-64132087 , Adaptor St Swivel Part No-64132299 , Switch, Key Selector Part No-64132903 , Hhcs 1/2 X 1 1 /4 C8 Part No-64403817 , Hhcs 12M X 30 Mm C8 Part No-64404001 , O-Ring Part No-64401554 , O-Ring Part No-64401556 , O-Ring Part No-64401593 , Flatwasher Part No-64404349 , Flatwasher Hrdpart No-64404356 , Hhcs M20 X 35Mm Part No-64404517 , Hhcs M20 X 2.5, 40Mm Lg Part No-64549314 , Shim Part No-70430546 , Washer Part No-70391152 , Water Temp. Sensor Part No-69041391 , Pld Part No-69041388 , O-Ring Part No-69040335 , Drive Pinion Part No-69040350 , Ring Gear Part No-69040351 , Rubber Seal Part No-69039540 , Rubber Seal Part No-69039541 , Balat Regulator Part No-69040200 , R/B 69039943 Differential And Carrie Part No-69040316
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Jharkhand View Result →
27.
Defence #9823926 AOC
Provision Of 9600 Gallon Grp Panel Water Tank With Staging And Pipe For Water Supply For Kv School And Staff Qtr At Laitkor Peak Under Ge (I) (Af) Shillong
Contract Date: Mar 17, 2026 Contract Value : ₹ 46.09 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Meghalaya View Result →
28.
Housing Urban and Rular Development #9786076 Price Bid
Tender For Mow/Deposit Work Under Jail-3 Sub Dn, Pwd Bhopal-1 1.2 Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. 1.2.1 Lime, moorum, building rubbish 1.2.2 Earth 1.2.3 Manure or sludge 1.2.4 Excavated rock 1.2.5 Sand, stone aggregate below 40mm nominal size 1.2.6 Stone aggregate 40mm nominal size and above 1.2.7 Stone soling 1.2.8 Bricks 1.2.9 S.W. Pipes 1.2.9.1 100 mm dia 1.2.9.2 150 mm dia 1.2.9.3 200 mm dia 1.2.9.4 250 mm dia 1.2.9.5 300 mm dia 1.2.9.6 350 mm dia 1.2.9.7 400 mm dia 1.2.9.8 450 mm dia 1.2.9.9 500 mm dia 1.2.9.10 600 mm dia 1.2.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes 1.2.10.1 100 mm dia 1.2.10.2 125 mm dia 1.2.10.3 150 mm dia 1.2.10.4 200 mm dia 1.2.10.5 250 mm dia 1.2.10.6 300 mm dia 1.2.10.7 350 mm dia 1.2.10.8 400 mm dia 1.2.10.9 450 and 500 mm dia 1.2.10.10 600, 700, 750 and 800 mm dia 2 1.3 Add extra for every additional lead of 50 metre or part thereof. 1.3.1 Lime, moorum, building rubbish 1.3.2 Earth 1.3.3 Manure or sludge 1.3.4 Excavated rock 1.3.5 Sand, stone aggregate below 40mm nominal size 1.3.6 Stone aggregate 40mm nominal size and above 1.3.7 Stone soling 1.3.8 Bricks 1.3.9 S.W. Pipes 1.3.9.1 100 mm dia 1.3.9.2 150 mm dia 1.3.9.3 200 mm dia 1.3.9.4 250 mm dia 1.3.9.5 300 mm dia 1.3.9.6 350 mm dia 1.3.9.7 400 mm dia 1.3.9.8 450 mm dia 1.3.9.9 500 mm dia 1.3.9.10 600 mm dia 1.3.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes 1.3.10.1 100 mm dia 1.3.10.2 125 mm dia 1.3.10.3 150 mm dia 1.3.10.4 200 mm dia 1.3.10.5 250 mm dia 1.3.10.6 300 mm dia 1.3.10.7 350 mm dia 1.3.10.8 400 mm dia 1.3.10.9 450 and 500 mm dia 1.3.10.10 600, 700, 750 and 800 mm dia 3 2.1 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. 2 2.2 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 5 2.3 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 6 2.4 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.4.1 beyond 30 cm girth up to and including 60 cm girth 2.4.2 beyond 60 cm girth up to and including 120 cm girth 2.4.3 beyond 120 cm girth up to and including 240 cm girth 2.4.4 above 240 cm girth 7 2.5 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil 8 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil 9 2.7 Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. 2.7.1 Ordinary rock 2.7.2 Hard rock (requiring blasting) 2.7.3 Hard rock (blasting prohibited) 10 2.8 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)Note:-Excavation of hard rock shall be the property of the contractor subject to recovery. excavated material has to shift from site within 15 days after instruction issued by Engineer-InCharge otherwise after this penalty will imposed on contractor at the rate of Rs 50 per cum per day 2.8.1 Ordinary rock 2.8.2 Hard rock (requiring blasting) 2.8.3 Hard rock (blasting prohibited) 11 2.9 Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil 2.9.1 Pipes, cables etc., not exceeding 80 mm dia. 2.9.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.9.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. 12 2.10 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). 13 2.11 Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 14 2.12 Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : 2.12.1 Ordinary rock : 2.12.1.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. 2.12.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia 2.12.2 Hard rock (requiring blasting) 2.12.2.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.2.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.12.2.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia 2.12.3 Hard rock (blasting prohibited) 2.12.3.1 Pipes, cables etc. not exceeding 80 mm dia. 2.12.3.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 2.12.3.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. 15 2.13 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 16 2.14 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) 17 2.15 Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). 2.15.1 Depth not exceeding 1.5 m. 2.15.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.15.3 Depth exceeding 3 m but not exceeding 4.5 m. 18 2.16 Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). 2.16.1 Depth not exceeding 1.5 m. 2.16.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.16.3 Depth exceeding 3 m but not exceeding 4.5 m. 19 2.17 Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) : 2.17.1 Depth not exceeding 1.5 m. 2.17.2 Depth exceeding 1.5 m but not exceeding 3 m. 2.17.3 Depth exceeding 3 m but not exceeding 4.5 m. 20 2.18 Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be leftpermanently in position. (Face area of timber permanently left to be measured). 21 2.23 Extra rates for quantities of works, executed: 2.23.1 In or under water and/or liquid mud, including pumping out water as required. 2.23.2 In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. 22 2.24 Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 23 2.25 Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means) 2.25.1 All kinds of soil. 2.25.2 Ordinary or hard rock. 24 2.26 Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. 25 2.27 Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete. 2.27.1 With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) 2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. 26 2.28 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m. 2.28.1 All kinds of soil. 2.28.2 Ordinary rock 2.28.3 Hard rock (requiring blasting) 2.28.4 Hard rock (blasting prohibited) 27 2.29 Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) 28 2.30 Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 2.30.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 2.30.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. 29 2.31 Deduct for disposed soil not levelled and neatly dressed. 30 2.32 Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. 31 2.33 Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). 32 2.34 Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. 33 2.35 Earth work in rough excavation by any means and bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. 34 2.36 Bankingfilling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. 35 2.37 Deduct for not rolling with power roller of minimum 8 tonnes for bankingfilling excavated earth in layers not exceeding 20cm in depth. 36 2.38 Deduct for not watering with the excavated earth for bankingfilling 37 2.39 Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty. 2.39.1 Permanent piping system with Junction boxes 2.39.2 Anti-termite chemical injected area 38 2.40 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) 39 3.1 Cement mortar 1:1 (1 cement: 1 sand) 40 3.2 Cement mortar 1:2 (1 cement: 2 sand). 41 3.3 Cement mortar 1:3 (1 cement: 3 sand). 42 3.4 Cement mortar 1:4 (1 cement: 4 sand). 43 3.5 Cement mortar 1:5 (1 cement: 5 sand). 44 3.6 Cement mortar 1:6 (1 cement: 6 sand). 45 3.7 Cement mortar 1:2 (1 cement: 2 stone dust). 46 3.8 Cement mortar 1:2 (1 cement: 2 marble dust). 47 3.9 White cement mortar 1:2 (1 white cement: 2 marble dust). 48 3.10 Cement mortar 1:5 (1 cement: 5 marble dust). 49 3.11 White cement mortar 1:3 (1 white cement: 3 marble dust). 50 3.12 White cement mortar 1:5 (1 white cement: 5 marble dust). 51 3.13 Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 52 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : 4.1.1 With 20mm nominal size graded stone aggregate. 4.1.1.1 M-25 – Grade concrete 4.1.1.2 M-20 – Grade concrete 4.1.1.3 M-15 – Grade concrete 4.1.1.4 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.1 M-15 - Grade concrete 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 4.1.3 With fly ash. 4.1.3.1 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) 4.1.3.2 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. 53 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : 4.2.1 With 20mm nominal size graded stone aggregate 4.2.1.1 M-25 – Grade concrete 4.2.1.2 M 20 – Grade concrete 4.2.1.3 M 15 – Grade concrete 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 4.2.2 With 40mm nominal size graded stone aggregate 4.2.2.1 M-15 - Grade concrete 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 54 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for : 4.3.1 Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. 4.3.2 above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. 4.3.3 Above plinth: Columns, pillars, posts and struts. 55 4.4 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing . 4.4.1 M-15 (With 20mm nominal size graded stone aggregate) 4.4.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 56 4.5 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) 57 4.6 Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete. 4.6.1 M-25 (With 20mm nominal size graded stone aggregate) 4.6.2 M-20 (With 20mm nominal size graded stone aggregate) 4.6.3 M-15 (With 20mm nominal size graded stone aggregate) 4.6.4 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. 58 4.7 Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete : 4.7.1 M-15 (With 20mm nominal size graded stone aggregate) 4.7.2 M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate 59 4.8 Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete. 4.8.1 M-15 (With 20mm nominal size graded stone aggregate) 4.8.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. 60 4.9 Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of 61 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). 62 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). 63 4.12 Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. 64 4.13 Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 65 4.14 Extra for concrete work in superstructure above floor two level for each floors or part thereof 66 4.15 Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. 67 4.16 Extra for laying concrete in or under foul positions. 68 4.17 Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) 69 4.18 Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. 70 4.19 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. 71 4.20 Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 72 4.21 Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 73 4.22 Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) 74 4.23 Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. 4.23.1 All works up to plinth level: 4.23.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.23.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.23.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 4.23.2 All works above plinth and upto floor two level 4.23.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.23.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.23.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 75 4.24 Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge. 4.24.1 All works up to plinth level: 4.24.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.24.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.24.1.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 4.24.2 All works above plinth and upto floor two level 4.24.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) 4.24.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 4.24.2.3 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) 76 4.25 Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. 77 4.26 Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering 78 5.1 Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 M-20 Grade Concrete 5.1.2 M-15 Grade Concrete 79 5.2 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement: 5.2.1 M-20 Grade Concrete 80 5.3 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade. 5.3.1 M-20 Grade Concrete 81 5.4 Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade. 5.4.1 M-20 Grade Concrete 82 5.5 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade. 5.5.1 M-20 Grade Concrete 83 5.6 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with 5.6.1 M-20 Grade Concrete 88 5.7 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with 5.7.1 M-20 Grade Concrete 84 5.8 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete 85 5.9 Centering and shuttering in cluding strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns, etc. for concrete upto plinth level 5.9.2 Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. 5.9.2.1 Uptoplinthlevel. 5.9.2.2 Above plinth upto 3.6 m height from plinth level 5.9.2.3 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. 5.9.3 Suspended floors, roofs, landings, balconies and access platform. 5.9.4 Shelves(Cast in situ) 5.9.5 Lintels, beams, girders, bressumers and cantilevers 5.9.6 Columns, P i l l a r s , Piers, Abutments, Posts and Struts. 5.9.7 Stairs, (excluding landings) except spiral- Staircases. 5.9.8 Spiral staircases (including landing). 5.9.9 Arches, domes,vaults upto 6m span 5.9.10 Extra for arches, domes, vaults exceeding 6 m span 5.9.11 Chimneys and shafts 5.9.12 Coffer/waffle slab of any size or shape as shown in the drawing. 5.9.13 Well steining 5.9.14 Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. 5.9.15 Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). 5.9.16 Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. 5.9.17 Cornices and mouldings 5.9.18 Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. 5.9.19 Weather shade, Chajjas, corbels etc., including Edges. 5.9.20 Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) 5.9.21 Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) 86 5.10 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured) 5.10.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). 87 5.11 Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. 88 5.12 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits. 5.12.1 50 mm thick 5.12.2 40 mm thick 5.12.3 25 mm thick 89 5.13 Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. 80 5.14 Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. 91 5.15 Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. 92 5.16 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete .(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”) 5.16.1 Mild steel and Medium Tensile steel bars. 5.16.2 Hard drawn steel wire 5.16.3 Cold twisted bars (CTD) 5.16.4 Hot rolled deformed bars 5.16.5 Hard drawn steel wire fabric 5.16.6 Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 93 5.17 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. 94 5.18 Providing and fixing in position copper plate as per design for expansion joints. 95 5.19 Providing and filling in position, blown bitumen in expansion joints. 96 5.20 Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. 97 5.21 Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. 98 5.22 Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints. 5. 22.1 12 mm thick 5. 22.2 25 mm thick 5. 22.3 50 mm thick 99 5.23 Providing and fixing sheet covering over expansion joints with iron screws as per design. 5. 23.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 5. 23.1.1 150mm wide. 5. 23.1.2 200mm wide. 5. 23.1.3 250mm wide. 5. 23.2 Aluminium fluted strips 3.15mm thick. 5. 23.2.1 150 mm wide. 5. 23.2.2 200 mm wide. 5. 23.2.3 250 mm wide. 5. 23.3 Stainless steel Grade 304 plate-1.0 mm thick 5. 23.3.1 150 mm wide. 5. 23.3.2 200 mm wide. 5. 23.3.3 250 mm wide. 100 5.24 Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 101 5.25 Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete.Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition 102 5.26 Extra for laying reinforced cement concrete in or under foul positions. 103 5.27 Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-25 grade for reinforced cement concrete work using cement content as per approved mix design concrete without impairing strength and durability as per direction of Engineer-in charge and pumping of concrete to site of laying and finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 330 kg/cum) and no extra payment for extra cement used as per mix design. 5.27.1 All works upto plinth level. 5.27.2 All works above plinth level and upto floor five level. 5.27.3 Add extra for each floor for all works above floor five level. 104 5.28 Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.) 5. 28.1 Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) 5. 28.2 Providing M-30 grade concrete instead of M- 25 grade.(Note : minimum cement content is @ 340 kg/cum) 5. 28.3 Providing M-35 grade concrete instead of M- 25 grade.(Note: : minimum cement content is @ 350 kg/cum) 5. 28.4 Providing M-40 grade concrete instead of M- 25 grade.(Note: minimum cement content is @ 360 kg/cum) 105 5.29 Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. 106 5.30 Providing and laying in position ready mixed concrete (RMC) of M-25 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.Note: Minimum cement content is @ 330 kg/cum. (No extra payment for using extra cement as per requirement of mix design.) 5.30.1 All works upto plinth level. 5.30.2 All works above plinth level and upto floor V level. 5.30.3 Extra for each additional floor for all works above floor five level 107 5.31 Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) 108 5.32 Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge. 5.32.1 Non pigmented wet curing compound 5.32.2 Pigmented wet curing compound. 109 5.33 Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item. 5. 33.1. Frame 125 mmx 60 mm (double rebate) 5. 33.2. Frame 100mmx 60 mm (Single rebate) 5. 33.3 Frame 85mmx 60 mm (Single rebate) 110 5.34 Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). 111 5.35 Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints. 5. 35.1 12 mm thick 5. 35.2 25 mm thick. 5. 35.3 50 mm thick. 112 5.36 Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. 113 5.37 Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276 5.37.1 150mm wide 5.37.2 200mm wide 5.37.3 250mm wide 114 5.38 Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. 115 5.39 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063). 5. 39.1 Floor Joint of 100 mm gap 5. 39.2 Floor Joint of 150 mm gap 5. 39.3 Floor Joint of 200 mm gap 116 5.40 Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). 5. 40.1 Wall Joint of 100 mm gap 5. 40.2 Wall Joint of 150 mm gap 5. 40.3 Wall Joint of 200 mm gap 117 5.41 Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centeringarragement support plates asper ASTM B221-02. . The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.) 5.41.1 Roof Joint for 100 mm gap 5.41.2 Roof Joint for 150 mm gap 5.41.3 Roof Joint for 200 mm gap 118 5.42 Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) 119 6.1 Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete. 6.1.1 Cement mortar 1:4 (1 cement : 4 sand) 6.1.2 Cement mortar 1:6 (1 cement : 6 sand) 120 6.2 Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete. 6.2.1 Cement mortar 1:4 (1 cement : 4 sand) 6.2.2 Cement mortar 1:6 (1 cement : 6 sand) 121 6.3 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. 6.3.1 Cement mortar 1:4 (1 cement : 4 sand) 6.3.2 Cement Mortar 1:6 (1 cement:6 sand). 122 6.4 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. 6.4.1 Cement mortar 1:4 (1 cement : 4 sand) 6.4.2 Cement Mortar 1:6 (1 cement:6 sand). 123 6.5 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete. 6.5.1 Cement mortar 1:4 (1 cement : 4 sand) 6.5.2 Cement Mortar 1:6 (1 cement: 6 sand). 124 6.6 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg / cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete. 6.6.1 Cement mortar 1:4 (1 cement : 4 sand) 6.6.2 Cement Mortar 1:6 (1 cement : 6 sand) 125 6.7 Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in : 6.7.1 Having 100 kg / cm2 average compressive strength. 6.7.1.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.1.2 Cement mortar 1:6 (1 cement : 6 sand) 6.7.2 Having 75 kg / cm2 average compressive strength. 6.7.2.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) 6.7.3 Having 50 kg / cm2 average compressive strength. 6.7.3.1 Cement mortar 1:4 (1 cement : 4 sand) 6.7.3.2 Cement mortar 1:6 (1 cement : 6 sand) 126 6.8 Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in : 6.8.1 Cement mortar 1:4 (1 cement : 4 sand) 6.8.2 Cement mortar 1:6 (1 cement : 6 sand) 127 6.9 Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) 128 6.10 Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). 129 6.11 Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item. 130 6.12 Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level. 6.12.1 Cement mortar 1:3 (1 cement : 3 sand) 6.12.2 Cement mortar 1:4 (1 cement : 4 sand) 131 6.13 Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level. 6.13.1 Cement mortar 1:3 (1 cement : 3 sand) 6.13.2 Cement mortar 1:4 (1 cement : 4 sand) 132 6.14 Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level 6.14.1 Cement mortar 1:3 (1 cement : 3 sand) 6.14.2 Cement mortar 1:4 (1 cement : 4 sand) 133 6.15 Half brick masonry with fly ash lime Gypsum bricks (FALG bricks) conforming to IS: 12894, in super structure above plinth and upto floor two level. 6.15.1 Having 100 kg/cm2 average compressive strength. 6.15.1.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.1.2 Cement mortar 1 : 4 (1 cement : 4 sand) 6.15.2 Having 75 kg/cm2 average compressive strength. 6.15.2.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.2.2 Cement mortar 1 : 4 (1 cement : 4 sand) 6.15.3 Having 50 kg/cm2 average compressive strength. 6.15.3.1 Cement mortar 1 : 3 (1 cement : 3 sand) 6.15.3.2 Cement mortar 1 : 4 (1 cement : 4 sand) 134 6.16 Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. 135 6.17 Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. 136 6.18 Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). 137 6.19 Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design 138 6.20 Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). 139 6.21 Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% 140 6.22 Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. 141 6.23 Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. 142 6.24 Extra for laying brick work in or under foul position. 143 6.25 Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. 144 6.26 Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete. 6.26.1 AAC Masonry in polymer modified mortar 145 6.27 Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof 146 6.28 Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. 147 6.29 Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels. Quantity of reinforcement steel in AAC panels shall be ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately. 148 6.30 Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. 149 6.32 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) 6.32.1 From ground level upto plinth level 6.32.2 Above plinth level upto floor II level 150 6.33 Brick work with modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) 6.33.1 From ground level upto plinth level 6.33.2 Above plinth level upto floor II level 151 6.34 Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 152 6.35 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. 153 7.1 Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 sand) 154 7.2 Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. 7.2.1 Cement mortar 1:6 (1cement: 6 sand). 155 7.3 Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof 156 7.4 Extra for random rubble masonry with hard stone in : 7.4.1 Square or rectangular pillars 7.4.2 Circular pillars. 157 7.5 Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. 158 7.6 Coursed rubble masonry (1st or 2nd sort) with hard stone in foundation and plinth. 7.6.1 Cement mortar 1:6 (1 cement : 6 sand) 7.6.2 Cement mortar 1:6 (1 cement : 6 sand) 159 7.7 Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level. 7.7.1 Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) 7.7.2 Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) 160 7.8 Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof 161 7.9 Extra for coursed rubble masonry with hard stone (first or second sort) in : 7.9.1 Square or rectangular pillars 7.9.2 Circular pillars. 7.9.3 Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. 162 7.10 Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade : 7.10.1 One face dressed. 7.10.1.1 Red sand stone 7.10.1.2 White sand stone 7.10.2 Both face dressed. 7.10.2.1 Red sand stone. 7.11.2.2 White sand stone 163 7.11 Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.11.1 One face dressed. 7.11.1.1 Red sand stone 7.11.1.2 White sand stone 7.11.2 Both face dressed. 7.11.2.1 Red sand stone. 7.11.2.2 White sand stone 164 7.12 Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.12.1 One face dressed 7.12.1.1 Red sand stone 7.12.1.2 White sand stone 7.12.2 Both face dressed. 7.12.2.1 Red sand stone. 7.12.2.2 White sand stone. 165 7.13 Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade. 7.13.1 Red sand stone one face punched. 7.13.2 Red sand stone both face punched 7.13.3 White sand stone one face punched. 7.13.4 White sand stone double face punched 166 7.14 Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. 167 7.15 Extra for plain ashlar or ashlar punched in : 7.15.1 Square or rectangular pillars 168 7.16 Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. 169 7.17 Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). 170 7.18 Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6 (1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade : 7.18.1 Red sand stone 7.18.2 White sand stone 171 7.19 Extra for stone work sunk or moulded or sunk and moulded or carved in : 7.19.1 Triangular or Square or rectangular pillars 7.19.2 Circular or polygonal pillars 172 7.20 Extra for stone work sunk or moulded in cornices. 173 7.21 Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately): 7.21.1 Red sand stone - exposed face fine dressed with rough backing. 7.21.1.1 70 mm thick. 7.21.1.2 60 mm thick. 7.21.1.3 50 mm thick 7.21.1.4 40 mm thick. 7.21.1.5 30 mm thick. 7.21.2 Red sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.2.1 70 mm thick. 7.21.2.2 60 mm thick. 7.21.2.3 50 mm thick 7.21.2.4 40 mm thick. 7.21.2.5 30 mm thick. 7.21.3 White sand stone - exposed face fine dressed with rough backing. 7.21.3.1 70 mm thick. 7.21.3.2 60 mm thick. 7.21.3.3 50 mm thick 7.21.3.4 40 mm thick. 7.21.3.5 30 mm thick. 7.21.4 White sand stone - Exposed face machine cut and table rubbed with rough backing. 7.21.4.1 70 mm thick. 7.21.4.2 60 mm thick. 7.21.4.3 50 mm thick 7.21.4.4 40 mm thick. 7.21.4.5 30 mm thick. 174 7.22 Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. 175 7.23 Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. 176 7.24 Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases 177 7.25 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. 178 7.26 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade: 7.26.1 Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. 7.26.2 White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. 179 7.27 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade: 7.27.1 Red sand stone 7.27.2 White sand stone 180 7.28 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. 181 7.29 Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. 182 7.30 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 7.30.1 Red sand stone 7.30.2 White sand stone 183 7.31 Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc. 7.31.1 Red sand stone 7.31.2 White sand stone 184 7.32 Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete.NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. 185 7.33 Extra for laying stone work in or under foul position. 186 7.34 Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. 187 7.35 Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately) 7.35.1 25mm thick Kota stone slabs exposed face dressed and rubbed. 7.35.2 25mm thick Dholpur stone slabs exposed face dressed and rubbed. 7.35.3 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. 7.35.4 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. 188 7.36 Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade. 7.36.1 Granite stone of any colour and shade 7.36.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble 189 7.37 Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 190 7.38 Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.) 7.38.1 Red sand stone. 7.38.2 White sand stone 191 7.39 Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) 192 7.40 Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame 193 8.1 Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). 194 8.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. (A) Structural analysis anddesign and preparation of shopdrawings for the specified designloads conforming to IS 875 partIII (the system must passed theproof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sectionsBfor fixing glazing panels of various thicknesses, aluminum cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals,microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage andprotection against fire hazard including (B) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminum alloy of 6005 T5 brackets of required sizes, sections and profiles etc. toaccommodate 3 Dimentional movement for achieving perfect verticality and fixing structuralglazing system rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contactswith nuts and washers etc. of stainless steel grade 316, of the required capacity and in requirednumbers.(C) Providing and filling, two part pump filled, structural silicone sealant and one partweather silicone sealant compatible with the structural silicone sealant of required bitesize in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(D) Providing and fixing in position flashings of solid aluminum sheet 1 mm thick andof sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight(E) Making provision for drainage of moisture/ water that enters the curtain glazing systemto make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary 195 8.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. 196 8.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. 197 8.5 Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. 198 8.6 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 199 8.7 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places. 8.7.1 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) 8.7.2 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 8.7.3 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) 200 8.8 Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured., 201 8.9 Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. 202 8.10 Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line.Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. 203 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood 9.1.2 Sal wood 9.1.3 Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) 9.1.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 9.1.4.1 Frame of size 100mmX60mm single or double rebate 9.1.4.2 Frame of size 120mmX60mm double rebate. 205 9.2 Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). 206 9.3 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw) 9.3.1 Sal wood 9.3.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.3.3 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 207 9.4 Extra for additional labour wood work in circular shape, such as in frames of fan light : 9.4.1 Second class teak wood 9.4.2 Sal wood 9.4.3 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.4.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. 208 9.5 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge. 9.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters 9.5.1.2 30 mm thick shutters 9.5.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. 9.5.2.1 35 mm thick shutters 9.5.2.2 30 mm thick shutters 9.5.3 Kiln seasoned selected planks of sheesham wood. 9.5.3.1 35 mm thick shutters 9.5.3.2 30 mm thick shutters 9.5.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters 9.5.4.1 35 mm thick 9.5.4.2 30 mm thick 209 9.6 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: 9.6.1 Second class teak wood 9.6.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.6.3 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. 9.6.4 Ply wood 5 ply, 9 mm thick : 9.6.4.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. 9.6.4.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type 9.6.5 Ply wood 7 ply, 9 mm thick : 9.6.5.1 Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. 9.6.5.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type 9.6.6 Particle Board 12 mm thick 9.6.6.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. 9.6.6.2 Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. 9.6.6.3 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. 9.6.6.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. 9.6.6.5 Coir Veneer Board (conforming to IS 14842) 12 mm thick 9.6.7 Float glass panes 9.6.7.1 4 mm thick glass pane (weight not less than 10 kg/sqm) 9.6.7.2 5 mm thick glass pane (weight not less than 12.5 kg/sqm) 9.6.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading 9.6.8.1 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum 9.6.8.2 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum 210 9.7 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of: 9.7.1 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : 9.7.2 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: 9.7.3 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: 211 9.8 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 9.8.1 Second class teak wood 9.8.1.1 35 mm thick 9.8.1.2 30 mm thick 9.8.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood 9.8.2.1 35 mm thick 9.8.2.2 30 mm thick 9.8.3 Kiln seasoned selected planks of sheesham wood. 9.8.3.1 35 mm thick 9.8.3.2 30 mm thick 9.8.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood 9. 8.4.1 30 mm thick shutters 9. 8.4.2 35 mm thick shutters 212 9.9 Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. 213 9.10 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 9.10.1 5 mm thick instead of 4 mm thick. 9.10.2 10 to 12 mm float glass 9.10.3 5.5 mm safety glass 9.10.4 10-12mm safety glass 214 9.11 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). 215 9.12 Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). 216 9.13 Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). 217 9.14 Deduct for not providing hinges in doors, windows or clerestory window shutters with : 9.14.1 Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. 9.14.2 ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. 218 9.15 Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. : 9.15.1 Panelled or panelled and glazed shutters : 9.15.1.1 Using ISI marked anodised aluminium butt hinges with necessary screws. 9.15.1.2 Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 9.15.2 Glazed shutters : 9.15.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. 9.15.2. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 219 9.16 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 9.16.1 12 mm thick 9.16.2 18 mm thick 220 9.17 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 9.17.1 18 mm thick 9.17.2 25 mm thick 221 9.18 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter. 9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.18.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.18.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. 222 9.19 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.19.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 9.19.3 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 223 9.20 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. 224 9.21 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 225 9.22 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : 9.22.1 Rectangular or square. 9.22.2 Circular. 226 9.23 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). 227 9.24 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). 228 9.25 Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws: 9.25.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.1.1 Second class teak wood. 9.25.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.1.3 Kiln seasoned selected class of sheesham wood. 9.25.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.2.1 Second class teak wood. 9.25.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.2.3 Kiln seasoned selected class of sheesham wood. 9.25.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.3.1 Second class teak wood. 9.25.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.3.3 Kiln seasoned selected class of sheesham wood. 9.25.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.4.1 Second class teak wood. 9.25.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.25.4.3 Kiln seasoned selected class of sheesham wood. 229 9.26 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge: 9.26.1 35 mm thick shutters 9.26.2 30 mm thick shutters 230 9.27 Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. 231 9.28 Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 9.28.1 25 mm long 9.28.2 32 mm long 9.28.3 40 mm long 9.28.4 50 mm long 9.28.5 60 mm long 232 9.29 Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface. 9.29.1 40 mm thick. 9.29.2 25 mm thick. 9.29.3 20 mm thick 9.29.4 12 mm thick 233 9.30 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 9.30.1 12 mm thick 9.30.2 18 mm thick 9.30.3 25 mm thick 234 9.31 Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 235 9.32 Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. 236 9.33 Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. 237 9.34 Providing and fixing skirting of Pre- laminated with (one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 9.34.1 18 mm thick 9.34.2 25 mm thick 238 9.35 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 9.35.1 2nd class teak wood 9.35.1.1 50x12 mm 9.35.1.2 50 x 20 mm 9.35.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.35.2.1 50x12 mm 9.35.2.2 50x20 mm 239 9.36 Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. 240 9.37 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. 241 9.38 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. 242 9.39 Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide. 9.39.1 Non decorative veneer on both sides. 9.39.2 Particle board with decorative veneering on both sides. 243 9.40 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. 244 9.41 Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 9.41.1 12 mm dia. 9.41.2 20 mm dia. 9.41.3 25 mm dia. 245 9.42 Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets : 9.42.1 20 mm dia (heavy type) 9.42.2 25 mm dia (heavy type) 246 9.43 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.43.1 Fixed to steel windows by welding. 9.43.2 Fixed to openings /wooden frames with rawl plugs screws etc. 247 9.44 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. 248 9.45 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. 249 9.46 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. 9.46.1 With 2nd class teak wood beading 62x19 mm. 9.46.2 With 12 mm mild steel U beading. 250 9.47 Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. 251 9.48 Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) 252 9.49 Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : 9.49.1 Sal wood. 9.49.2 Haldu, Kail, Bija wood. 253 9.50 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 9.50.1 125x65x2.12 mm 9.50.2 100x58x1.90 mm 9.50.3 75x47x1.70 mm 9.50.4 50x37x1.50 mm 254 9.51 Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete : 9.51.1 125x90x4.00 mm 9.51.2 100x75x3.50 mm 9.51.3 75x60x3.10 mm 9.51.4 50x40x2.50 mm 255 9.52 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 9.52.1 125x65x2.12 mm 9.52.2 100x58x1.90 mm 9.52.3 75x47x1.70 mm 9.52.4 50x37x1.50 mm 256 9.53 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 9.53.1 150x125x27x2.80 mm 9.53.2 125x125x27x2.80 mm 9.53.3 100x125x27x2.80 mm 9.53.4 75x100x20x2.24 mm 257 9.54 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 9.54.1 150 mm 9.54.2 125 mm 9.54.3 100 mm 258 9.55 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 9.55.1 150 mm 9.55.2 125 mm 9.55.3 100 mm 259 9.56 Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. 9.56.1 Overall width 35 mm. 9.56.2 Overall width 50 mm. 9.56.3 Overall width 65 mm. 260 9.57 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 9.57.1 300x16 mm 9.57.2 250x16 mm 261 9.58 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.58.1 250x10 mm 9.58.2 200x10 mm 9.58.3 150x10 mm 9.58.4 100x10 mm 262 9.59 Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete 263 9.60 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete : 9.60.1 300x20x6 mm 9.60.2 250x20x6 mm 264 9.61 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 9.61.1 125 mm 9.61.2 100 mm 9.61.3 75 mm 265 9.62 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 9.62.1 150 mm 9.62.2 115 mm 9.62.3 90 mm 266 9.63 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 9.63.1 300 mm weighing not less than 200 gms. 9.63.2 250 mm weighing not less than 150 gms. 9.63.3 200 mm weighing not less than 120 gms. 267 9.64 Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) 268 9.65 Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 9.65.1 300x16 mm 9.65.2 250x16 mm 269 9.66 Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.66.1 250x10 mm 9.66.2 200x10 mm 9.66.3 150x10 mm 9.66.4 100x10 mm 270 9.67 Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. 271 9.68 Providing and fixing ISI marked stainless steel door latches with screws etc. complete : 9.68.1 300x20x6 mm 9.68.2 250x20x6 mm 272 9.69 Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : 9.69.1 125 mm 9.69.2 100 mm 9.69.3 75 mm 273 9.70 Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete : 9.70.1 150 mm 9.70.2 115 mm 9.70.3 90 mm 274 9.71 Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete. 9.71.1 300 mm weighing not less than 200 gms. 9.71.2 250 mm weighing not less than 150 gms. 9.71.3 200 mm weighing not less than 120 gms. 275 9.72 Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) 276 9.73 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 9.73.1 125x64x1.90 mm 9.73.2 100X58X1.90 mm 9.73.3 75x47x1.80 mm 9.73.4 50x37x1.50 mm 277 9.74 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 9.74.1 125x64x2.50 mm 9.74.2 100x60x2.50 mm 9.74.3 75x50x2.50 mm 278 9.75 Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) 279 9.76 Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. 280 9.77 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 9.77.1 125x85x5.5 mm (heavy type) 9.77.2 125x70x4 mm (ordinary type) 9.77.3 100x85x5.5 mm (heavy type) 9.77.4 100x70x4 mm (ordinary type) 9.77.5 75x65x4 mm (heavy type) 9.77.6 75x40x2.5 mm (ordinary type) 9.77.7 50x40x2.5 mm (ordinary type) 281 9.78 Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete : 9.78.1 150x125x27x5 mm 9.78.2 125x125x27x5 mm 9.78.3 100x125x27x5 mm 9.78.4 75x100x20x3.2 mm 282 9.79 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.79.1 400x10 mm 9.79.2 250x10 mm 9.79.3 200x10 mm 9.79.4 150x10 mm 9.79.5 100x10 mm 283 9.80 Providing and fixing bright finished brass door latch with necessary screws etc. complete. 9.80.1 300x16x5 mm 9.80.2 250x16x5 mm 284 9.81 Providing and fixing bright finished brass handles with necessary screws etc. complete. 9.81.1 125 mm 9.81.2 100 mm 9.81.3 75 mm 285 9.82 Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete. 9.82.1 300x16mm 9.82.2 250x16mm 286 9.83 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 287 9.84 Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). 288 9.85 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 289 9.86 Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). 290 9.87 Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) : 9.87.1 40 mm 9.87.2 50 mm 9.87.3 65 mm 9.87.4 75 mm 291 9.88 Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) 292 9.89 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 293 9.90 Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. 294 9.91 Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete : 9.91.1 300 mm weighing not less than 330 gms 9.91.2 250 mm weighing not less than 280 gms 9.91.3 200 mm weighing not less than 240 gms 295 9.92 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: 9.92.1 150 mm 9.92.2 115 mm 9.92.3 90 mm 296 9.93 Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. 297 9.94 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. 298 9.95 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. 299 9.96 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 300 9.97 Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). 301 9.98 Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). 302 9.99 Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of : 9.99.1 Size 40 mm 9.99.2 Size 50 mm 9.99.3 Size 65 mm 9.99.4 Size 75 mm 303 9.100 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. 304 9.101 Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete. 9.101.1 300x16mm 9.101.2 250x16mm 305 9.102 Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete. 9.102.1 400X10mm 9.102.2 300x10mm 9.102.3 250x10mm 9.102.4 200x10 mm 9.102.5 150x10 mm 9.102.6 100x10 mm 306 9.103 Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete. 9.103.1 300x16x5mm 9.103.2 250x16x5mm 307 9.104 Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. 308 9.105 Providing and fixing chromium plated brass handles with necessary screws etc. complete: 9.105.1 125 mm 9.105.2 100 mm 9.105.3 75 mm 309 9.106 Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. 310 9.107 Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete : 9.107.1 300 mm weighing not less than 330 gms 9.107.2 250 mm weighing not less than 280 gms 9.107.3 200 mm weighing not less than 240 gms 311 9.108 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters. 9.108.1 125x75x4 mm 9.108.2 125x63x4 mm 9.108.3 100x75x4 mm 9.108.4 100x63x4 mm 9.108.5 100x63x3.2 mm 9.108.6 75x63x4 mm 9.108.7 75x63x3.2 mm 9.108.8 75x45x3.2 mm 312 9.109 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 9.109.1 300x16 mm 9.109.2 250x16 mm 313 9.110 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.110.1 400X10mm 9.110.2 300x10 mm 9.110.3 250x10 mm 9.110.4 200x10 mm 9.110.5 150x10 mm 9.110.6 100x10 mm 314 9.111 Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. 315 9.112 Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 316 9.113 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 9.113.1 125 mm 9.113.2 100 mm 9.113.3 75 mm 317 9.114 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 9.114.1 Single rubber stopper 9.114.2 Twin rubber stopper 318 9.115 Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 319 9.116 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 9.117 Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. 321 9.118 Providing and fixing PTMT handles with necessary screws etc. complete. 9.118.1 125x34x24 mm weighing not less than 23 gms. 9.118.2 150x34x24 mm weighing not less than 26 gms. 322 9.119 Providing and fixing PTMT Butt hinges with necessary screws etc. complete. 9.119.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. 9.119.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. 323 9.120 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. 9.120.1 152x42x18 mm weighing not less than 60 gms. 9.120.2 202x42x18 mm weighing not less than 78 gms. 324 9.121 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. 325 9.122 Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. 326 9.123 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 9.123.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.1.1 Second class teak wood. 9.123.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.1.3 Kiln seasoned selected class of sheesham wood. 9.123.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.2.1 Second class teak wood. 9.123.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.2.3 Kiln seasoned selected class of sheesham wood. 9.123.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.123.3.1 Second class teak wood. 9.123.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.3.3 Kiln seasoned selected class of sheesham wood. 9.123.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.123.4.1 Second class teak wood. 9.123.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. 9.123.4.3 Kiln seasoned selected class of sheesham wood. 327 9.124 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 9.124.1 With 2nd class teak wood beading 62x19 mm. 9.124.2 With 12 mm mild steel U beading. 328 9.125 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. 329 9.126 Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). 330 9.127 Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. 331 9.128 Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 332 9.129 Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality). 9.129.1 Triple strip vertical type. 9.129.2 Double strip (horizontal type). 333 9.130 Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). 334 9.131 Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 9.131.1 300mm long 9.131.2 450mm long 9.131.3 500mm long 335 9.132 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) 336 9.133 Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick. 9.133.1 Marine plywood conforming to IS: 710 9.133.2 Fire retardant plywood conforming to IS: 5509. 337 9.134 Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 9.134.1 1.5 mm thick. 9.134.2 1.0 mm thick. 338 9.135 Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge. 339 9.136 Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. 9.136.1 With decorative veneering on one side and commercial veneering on other side. 9.136.2 With non decorative veneering on both sides. 340 9.137 Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium U type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of U beading and hinges will be paid for separately). 341 9.138 Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 9.138.1 12 mm thick. 9.138.2 18 mm thick. 9.138.3 25 mm thick. 342 9.139 Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete 343 9.140 Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete. 9.140.1 18 mm thick 9.140.2 25 mm thick 344 9.141 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete. 9.141.1 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. 9.141.2 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. 9.141.3 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. 9.141.4 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. 9.141.5 68mm overall thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 conforming to IS 14862:2000. (for wet areas) 9.141.6 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 345 9.142 Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the W profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 9.142.1 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. 9.142.2 12 mm thick Gypsum board conforming to IS: 2095 Part-I. 9.142.3 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. 9.142.4 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. 9.142.5 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. 346 9.143 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. 347 9.144 Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 348 9.145 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). 9.145.1 Board 12 mm thick 9.145.2 Board 18 mm thick 349 9.146 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 9.146.1 18 mm thick 9.146.2 25 mm thick 350 9.147 Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. 351 9.148 Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. 352 9.149 Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit. 9.149.1 Wt. 8.20 kg/m2 9.149.2 Wt. 4.2 kg/m2 353 9.150 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-incharge. (Frame work shall be paid forseparately) 9.150.1 12mm thick commercial ply conforming to IS: 1328 BWR type. 9.150.2 18mm thick commercial ply conforming to IS: 1328 BWR type. 354 9.151 Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. 355 9.152 Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. 356 9.153 Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. 357 9.154 Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size 1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c. The panels to be fixed on the cross channel with suitable fasteners. 358 9.155 Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics. 9.155.1 Using 8mm thick magnesia block 9.155.2 Using10mm thick magnesia block 9.155.3 Using12mm thick magnesia block 9.155.4 Using12mm thick magnesia block 359 9.156 Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. 360 9.157 Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. 361 9.158 Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge: 9.158.1 Extruded section Profile size 48x40 mm. 9.158.2 Extruded section Profile size 42x50 mm. 362 9.159 Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 363 9.160 Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge. 364 9.161 Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. 365 9.162 Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-charge. 366 9.163 Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturers specification and direction of engineer-in-charge. 367 9.164 Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturers specification and direction of Engineer-in-Charge. 368 9.165 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturers specification and direction of Engineer-in- Charge. 369 9.166 Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing. 9.166.1 Plain PVC door shutters. 9.166.2 Pre laminated PVC door shutters. 370 9.167 Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. 371 9.168 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: 9.168.1 Non decorative finish. 9.168.2 Decorative finish (both side wood grained finish). 372 9.169 Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) 9.169.1 Single rebate (75 mm X 50 mm) 9.169.2 Single rebate (100 mm X50 mm) 9.169.3 Single or double rebate (125 mm X 65 mm) 373 9.170 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 9.170.1 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.2 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.3 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter 9.170.4 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter 374 9.171 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 9.171.1 30 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 9.171.2 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter 375 9.172 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 9.172.1 18 mm thick 9.172.2 25 mm thick 376 9.173 Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately) 9.173.1 6 mm thick 9.173.2 12 mm thick 377 9.174 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately. 378 9.175 Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. 379 9.176 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in- charge. 9.176.1 Non decorative finish (matt finish). 9.176.2 Decorative finish (wood grained finish). 380 9.177 Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. 381 9.178 Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided 382 9.179 Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. 383 9.180 Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. 384 9.181 Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. 385 9.182 Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately). 386 9.183 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). 387 9.184 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance. 388 9.185 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. 389 9.186 Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-in-charge. 390 9.187 Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.) 9.187.1 Casement Window (Outward/Inward opening) with hinge System. 9.187.1.1 Frame (50 mm x 50mm) 9.187.1.2 Sash (Style and Rail) (62 mm x 34 mm) 9.187.1.3 Mullion (intermediate Section) (66mm x 50 mm) 9.187.1.4 ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) 9.187.1.5 Glazing bead (12mm x 18mm) 9.187.2 Casement Window (With friction hinge and outward opening) 9.187.2.1 Casement Frame (67mm x 62mm) 9.187.2.2 Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) 9.187.2.3 Casement Glazing bead (35mm x 18 mm) 9.187.3 Sliding Window (Two Track, 2/4 Shutters) 9.187.3.1 Two Track Sliding Frame (67mm x 52mm) 9.187.3.2 Sliding window Sash (60mm x 44mm) 9.187.3.3 Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) 9.187.3.4 Sliding Glazing bead (35 mm x 18 mm) 9.187.4 Sliding Door (Two Track, 2/4 Shutters) 9.187.4.1 Two Track Sliding Frame (67mm x 52mm) 9.187.4.2 Sliding Door Sash (80mm x 44mm) 9.187.4.3 Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) 9.187.4.4 Sliding Glazing bead (35 mm x 18 mm) 391 9.188 Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 9.188.1 200 x 19 x 1.9 mm 9.188.2 250 x 19 x 1.9 mm 9.188.3 300 x 19 x 1.9 mm 9.188.4 350 x 19 x 1.9 mm 9.188.5 400 x 19 x 1.9 mm 392 9.189 Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. 393 9.190 Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. 394 9.191 Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. 395 9.192 Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. 396 9.193 Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. 397 9.194 Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.194.1 Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) 9.194.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). 9.194.3 Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). 9.194.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) 9.194.5 Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) 9.194.6 Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) 398 9.195 Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.195.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) 399 9.196 Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.196.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). 9.196.2 Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). 400 9.197 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.197.1 Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) 9.197.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 9.197.3 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). 9.197.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 9.197.5 Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) 401 9.198 Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.198.1 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). 9.198.2 Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). 402 9.199 Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.199.1 Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). 9.199.2 Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). 9.199.3 Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) 9.199.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) 403 9.200 Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters. 404 9.201 Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet (Single Extruded) with density not less than 600 kg/cum, conforming to IS: 2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO : 9001 -2000 certified company. 9.201.1 24 to 25 mm thick plain solid PVC flush door shutter 9.201.2 28 to 30 mm thick plain solid PVC flush door shutter 405 9.202 Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company. 9.202.1 1mm thick laminated sheet 9.202.2 0.12 mm thick laminated sheet 406 9.203 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge. 9.203.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.203.2 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.203.3 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 407 9.204 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202. 9.204.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. 9.204.2 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 9.204.3 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. 408 9.205 Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. 409 9.206 Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas. 9.206.1 Acrylic Solid Surface sheet – Glacier white designer white 9.206.1.1 6 mm thick sheet 9.206.1.2 12 mm thick sheet 9.206.2 Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue 9.206.2.1 6 mm thick sheet 9.206.2.2 12 mm thick sheet 9.206.3 Acrylic Solid Surface sheet - Any other 9.206.3.1 6 mm thick sheet 9.206.3.2 12 mm thick sheet 410 9.207 Providing and fixing of 8 mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). 411 9.208 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.208.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.208.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.208.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. 412 9.209 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.209.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.209.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws 9.209.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. 413 9.210 Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.210.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.210.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 414 9.211 HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.211.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.211.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 415 9.212 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B). 9.212.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.212.2 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. 9.212.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. 416 9.213 Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202 9.213.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.213.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.213.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 417 9.214 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge. 9.214.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.214.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.214.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 418 9.215 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge. 9.215.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.215.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.215.3 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 419 9.216 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. 9.216.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.216.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. 9.216.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. 420 9.217 Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. 421 9.218 Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. 422 10.1 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 423 10.2 Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 424 10.3 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required. 425 10.4 Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. 426 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angels 40x40x6mm for diagonal braces 10.5.2 Using flats 30x6mm for diagonal braces and central cross piece. 427 10.6 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25mm M.S. laths with 1.25 mm thick top cover. 10.6.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover. 10.6.3 80x0.90 mm M.S. laths with 0.90 mm thick top cover. 428 10.7 Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters. 10.7.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area. 10.7.2 Exceeding 16.80 sqm in area. 429 10.8 Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). 430 10.9 Providing and fixing ball bearing for rolling shutters. 431 10.10 Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). 10.10.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). 10.10.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.10.3 Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. 432 10.11 Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.11.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 433 10.12 Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge: 10.12.1 Profile B of 1.60mm thick single rebate of size 80mmx50mm 10.12.1.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.2 Profile C of 1.60mm thick single rebate of size 100mmx50mm 10.12.2.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.3 Profile E of 1.60mm thick double rebate of size 115mmx50mm 10.12.3.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.4 Profile B of 1.25mm thick single rebate of size 80mmx50mm 10.12.4.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.4.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.5 Profile C of 1.25mm thick single rebate of size 100mmx50mm 10.12.5.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.5.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 10.12.6 Profile E of 1.25mm thick double rebate of size 115mmx50mm 10.12.6.1 Fixing with adjustable lugs with split end tail to each jamb. 10.12.6.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 434 10.13 Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels. 10.13.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). 10.13.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). 435 10.14 Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.14.1 Hot finished welded type tubes 10.14.2 Hot finished seamless type tubes 10.14.3 Electric resistance or induction butt welded tubes. 436 10.15 Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. 437 10.16 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. 438 10.17 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. 439 10.18 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. 440 10.19 Providing and fixing bolts including nuts and washers complete. 441 10.20 Providing and fixing M.S. rivets of sizes in position. 442 10.21 Welding by gas or electric plant including transportation of plant at site etc. complete. 443 10.22 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.22.1 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. 10.22.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 444 10.23 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer. 10.23.1 M.S. tube. 10.23.2 E.R.W. tubes. 445 10.24 Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge. 10.24.1 10x60 mm 10.24.2 10x80 mm 10.24.3 10x120 mm 10.24.4 10x140 mm 10.24.5 10x160mm 446 10.25 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 447 10.26 Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete. 10.26.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides 10.26.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 448 10.27 Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete. 10.27.1 With 4.0 mm thick glass panes 10.27.2 With 5.50 mm thick glass panes 10.27.3 With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. 10.27.4 With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. 10.27.5 With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. 10.27.6 With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 10.27.7 With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 10.27.8 With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. 449 10.28 Add extra for providing and fixing froasted glass instead of float glass. 10.28.1 With 4.0 mm thick glass panes. 10.28.2 With 5.5 mm thick glass panes. 450 10.29 Supplying at site: 10.29.1 R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). 10.29.2 Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) 10.29.3 Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). 451 10.30 Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). 452 10.31 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. 453 10.32 Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. 454 10.33 Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only). 455 10.34 Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately) 10.34.1 Made of G.I. wire. 10.34.2 Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. 456 10.35 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) 457 10.36 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). 458 10.37 Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. Note:- For grouting of Steel frames in masonary installations ;cement slurry of 1:3 ratio by civil contractor/fire rated PU foam or such fire rated material may be recommended except head member(Payable in extra item). Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from minimum 1.2mm thick galvanised steel sheet. The infill material shall be mineral wool of minimum density 96 kg/cum. All doors shall befactory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item).Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer 459 10.38 Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 10.38.1 Openable window 10.38.2 Fixed windows 460 10.39 Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. 10.39.1 Openable single rebate window 10.39.2 Fixed single rebate window 461 10.40 Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.. 10.40.1 Openable double rebate window 10.40.2 Fixed double rebate window 462 10.41 Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate) 463 10.42 Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 464 10.43 Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 465 11.1 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) 466 11.2 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 467 11.3 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 468 11.4 Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. 469 11.5 Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. 470 11.6 Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 471 11.7 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) 11.7.1 Dark shade pigment with ordinary cement. 11.7.2 Light shade pigment with white cement. 11.7.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.7.4 White cement without any pigment. 11.7.5 Light shade pigment with ordinary cement. 11.7.6 Ordinary cement without any pigment. 472 11.8 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm) 11.8.1 Dark shade pigment with Ordinary cement. 11.8.2 Light shade pigment with white cement. 11.8.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.8.4 White cement without any pigment. 11.8.5 Light shade pigment with ordinary cement. 11.8.6 Ordinary cement without any pigment. 473 11.9 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm) 11.9.1 Dark shade pigment with ordinary cement. 11.9.2 Light shade pigment with white cement. 11.9.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.9.4 White cement without any pigment. 11.9.5 Light shade pigment with ordinary cement. 11.9.6 Ordinary cement without any pigment. 474 11.10 Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume : 11.10.1 Dark shade pigment with ordinary cement. 11.10.2 Light shade pigment with white cement. 11.10.3 Medium shade pigment with 50% white cement and 50% ordinary cement. 11.10.4 White cement without any pigment. 11.10.5 Light shade pigment with ordinary cement. 11.10.6 Ordinary cement without any pigment. 475 11.11 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. 476 11.12 Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. 477 11.13 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete . 478 11.14 Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : 11.14.1 Light shade using white cement. 11.14.2 Medium shade using 50%white cement and 50% ordinary cement. 11.14.3 Dark shade using ordinary cement. 11.14.4 Ordinary cement without any pigment. 479 11.15 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. 480 11.16 Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : 11.16.1 Light shade pigment using white cement. 11.16.2 Medium shades pigment using 50% white cement and 50% ordinary cement. 11.16.3 Dark shade pigment using ordinary cement. 11.16.4 Ordinary cement without any pigment. 481 11.17 Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) : 11.17.1 Light shade pigment using white cement. 11.17.2 Medium shade pigment using 50% white cement, 50% ordinary cement. 11.17.3 Dark shade pigment using ordinary cement. 11.17.4 Ordinary cement without any pigment. 482 11.18 Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. 11.18.1 Light shade pigment using white cement. 11.18.2 Medium shade pigment using 50% white cement 50% Grey cement. 11.18.3 Dark shade pigment using ordinary cement. 11.18.4 Ordinary cement without any pigment. 483 11.19 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm) 11.19.1 Makrana white second quality. 11.19.2 Raj Nagar plain. 11.19.3 Agaria White/Morgarh 11.19.4 Katni marble 11.19.5 Black Zebra. 11.19.6 Udaipur / Baroda green marble 11.19.7 Pink plain marble. 11.19.8 Jaisalmer Yellow 484 11.20 Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.) 11.20.1 Makrana white second quality. 11.20.2 Raj Nagar plain. 11.20.3 Agaria White/Morgarh 11.20.4 Katni marble 11.20.5 Black Zebra. 11.20.6 Udaipur / Baroda green marble 11.20.7 Pink plain marble. 11.20.8 Jaisalmer Yellow 485 11.21 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.) 11.21.1 Makrana white second quality. 11.21.2 Raj Nagar plain. 11.21.3 Agaria White/Morgarh 11.21.4 Katni marble 11.21.5 Black Zebra. 11.21.6 Udaipur / Baroda green marble 11.21.7 Pink plain marble. 11.21.8 Jaisalmer Yellow 486 11.22 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge. 11.22.1 Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black 11.22.2.1 Granite fine grained dark crystal of other colours and various patterns 11.22.2.2 Granite coarse grained light black/ light red/white with crystal of other colours and various patterns 11.22.2.3 Granite grey/pink/brown with various patterns 11.22.3 Cuddpah stone 487 11.23 Extra for prefinished nosing to treads of steps of marble stone. 488 11.24 Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. 489 11.25 Extra for prefinished grooves to treads of steps of granite stone 490 11.26 Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 491 11.27 Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. 492 11.28 Italian marble flooring in required design and patterns 11.28.1 Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Note – This item shall be executed only after the prior approval of Chief Engineer. 493 11.29 Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately). 111.29.1 Area of slab over 0.50 sqm 11.29.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.1.3 Gray/Pink/Brown or equivalent with various patterns 11.29.2 Area of slab upto 0.50 sqm 11.29.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.2.2 Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.29.2.3 Gray/Pink/Brown or equivalent with various patterns 494 11.30 Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 11.30.1 Area of slab over 0.50 sqm 11.30.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.1.3 Gray/Pink/Brown or equivalent with various patterns 11.90.2 Area of slab upto 0.50 sqm 11.30.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.2.2 Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.30.2.3 Gray/Pink/Brown or equivalent with various patterns 492 11.31 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm) 11.31.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter 11.31.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter 11.31.3 Gray/Pink/Brown or equivalent with various patterns 495 11.32 Deduct for not polishing granite flooring (item no 11.29 & 11.30) 496 11.33 Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent, 11.33.1 Flamed Finish Polish 11.33.2 Leather Finish Polish 497 11.34 Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. 498 11.35 Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. 499 11.36 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) 500 11.37 Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 501 11.38 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 502 11.38.1 10-12 mm thick 11.38.2 20 mm thick 503 11.39 Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) 504 11.40 Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 11.40.1 Marble work 11.40.2 Granite work. 505 11.41 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. 506 11.42 Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 507 11.43 Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. 508 11.44 Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush. 11.44.1 Red sand stone 11.44.2 White sand stone 11.44.3 Grey lime stone 11.44.4 Kota stone 509 11.45 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. 11.45.1 Red sand stone 11.45.2 White sand stone 510 11.46 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with pigment to match the shade of stone and pointing with same mortar 11.46.1 Red sand stone 11.46.2 White sand stone 511 11.47 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 512 11.48 Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. 513 11.49 Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 514 11.50 Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. 515 11.51 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. 516 11.52 Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. 517 11.53 Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. 518 11.54 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. 519 11.55 Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. 520 11.56 Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. 521 11.57 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 522 11.58 Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: 523 11.59 Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer- in-charge. 524 11.60 Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge. 525 11.60.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. 526 11.60.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. 527 11.61 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 11.61.1 Marble tiles (polished) Raj Nagar. 11.61.2 Granite tile of any colour /shade 528 11.62 Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately). 11.62.1 Gunmetal cramps. 11.62.2 Stainless steel cramps. 529 11.63 Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 11.63.1 Fastener with threaded dia 6 mm. 11.63.2 Fastener with threaded dia 10 mm. 11.63.3 Fastener with threaded dia 12 mm. 530 11.64 Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. 11.64.1 White Agaria Marble Stone. 11.64.2 Granite Stone of approved shade. 531 11.65 Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 11.65.1 300 mm Finished Floor Height (FFH) 11.65.2 450 mm Finished Floor Height (FFH). 532 11.66 Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. 533 11.67 Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period (This item is to be used only for operation theaters in hospitals) 11.67.1 1 mm thick 11.67.2 2 mm thick 11.67.3 3 mm thick 534 11.68 Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. 535 11.69 Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. 536 11.70 Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. 537 11.71 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks 11.71.1 100 mm thick 11.71.2 200mm thick 538 11.72 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 11.72.1 80 mm thick C.C. paver block of M-35 grade 11.72.2 60 mm thick C.C. paver block of M-35 grade 11.72.3 60 mm thick C.C. paver block of M-30 grade 539 11.73 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). 540 11.74 Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. 541 11.75 Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. 11.75.1 Granite Door frame for 100mm thick wall Thickness. 11.75.2 Granite Door frame for 200mm thick wall Thickness. 542 11.76 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11.76.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm 11.76.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm 543 11.77 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 77.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm 11. 77.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm 544 11.78 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 78.1 In light shade glossy/ rustic /stain finished 11. 78.1.1 Size 600X600 mm thickness 9-10 mm 11. 78.1.2 Size 800X800mm thickness 11-12mm 11. 78.1.3 Size 800X1200 mm thickness 11-12mm 11. 78.2 In dark shade glossy/ rustic /stain finished 11. 78.2.1 (a) Size 600X600 mm thickness 9-10 mm 11. 78.2.2 (b) Size 800X800mm thickness 11-12mm 11. 78.2.3 (c) Size 800X1200 mm thickness 11-12mm 545 11.79 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 79.1 In light shade glossy/ rustic /stain finished 11. 79.1.1 (a) Size 600X600 mm thickness 9-10 mm 11. 79.1.2 (b) Size 800X800mm thickness 11-12mm 11. 79.1.3 (c) Size 800X1200 mm thickness 11-12mm 11. 79.2 In dark shade glossy/rustic/stain finished 11. 79.2.1 (a) Size 600X600 mm thickness 9-10 mm 11. 79.2.2 (b) Size 800X800mm thickness 11-12mm 11. 79.2.3 (c) Size 800X1200 mm thickness 11-12mm 546 11.80 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 80.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 80.1.1 (a) Size 300X300 mm thickness 9-10 mm 11. 80.1.2 (b) Size 600X600mm thickness 9-10mm 11. 80.1.3 (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) 11. 80.2 In dark colour and shade etc. 11. 80.2.1 (a) Size 300X300 mm thickness 9-10 mm 11. 80.2.2 (b) Size 600X600mm thickness 9-10mm 11. 80.2.3 (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) 547 11.81 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11. 81.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 81.1.1 (a) Size 300X300 mm thickness 9-10 mm 11. 81.1.2 (b) Size 600X600mm thickness 9-10mm 11. 81.2 In dark colour and shades etc. 11. 81.2.1 (a) Size 300X300 mm thickness 9-10 mm 11. 81.2.2 (b) Size 600X600mm thickness 9-10mm 548 11.82 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. complete 11. 82.1 For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) 11. 82.1.1 Size 600X600 mm thickness 9-10 mm 11. 82.1.2 Size 800X800mm thickness 11-12mm 11.82.1.3 Size 800X1600 mm thickness 11-12mm 11.82.1.4 Size 1000X1000 mm thickness 11-12mm 11. 82.1.5 Size 600X1200 mm thickness 11-12mm 11. 82.1.6 Size 800X1200 mm thickness 11-12mm 11. 82.1.7 Size 1200X1200 mm thickness 11-12mm 11.82.1.8 Size 1200X1800 mm thickness 11-12mm 11.82.1.9 Size 1200X2400 mm thickness 11-12mm 11. 82.2 For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours, Size 300X600 mm thickness 9-10 mm 11. 82.3 For wall polished / Glossy finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e. within 6 hours, Size 300X600 mm thickness 9-10 mm 549 11.83 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete 11. 83.1 For skirting, risers etc. glossy/ rustic /stain/matt finished in all colours and shades 11. 83.1.1 Size 600X600 mm thickness 9-10 mm 11. 83.1.2 Size 800X800mm thickness 11-12mm 11. 83.1.3 Size 600X1200 mm thickness 11-12mm 11. 83.1.4 Size 800X1200 mm thickness 11-12mm 550 11.84 Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately). 11. 84.1 Area of tiles not less 0.18 sqm 11. 84.1.1 Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter 11. 84.1.2 Course granite light Black/light Red/ off White with crystals of other colors and various patterns 11. 84.1.3 Gray/Pink/Brown with various patterns 551 11.85 Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 11. 85.1 Area of tiles not less 0.18 sqm 11. 85.1.1 Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter 11. 85.1.2 Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns 11. 85.1.3 Gray/Pink/Brown with various patterns 552 11. 86 Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx. 11. 86.1 Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. 11. 86.2 Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. 553 11.87 Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile. 554 11.88 Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. 555 11.89 Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. 556 11.90 Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. 557 11.91 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge. 11. 91.1 300x300mm 11. 91.2 400x400mm 11. 91.3 600x600mm 558 11.92 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. 559 12.1 Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 1.00mm thick with zinc coating not less than 275gm/m² 12.1.2 0.80mm thick with zinc coating not less than 275gm/m² 12.1.3 0.63 mm thick with zinc coating not less than 275gm/m² 560 12.2 Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. 561 12.3 Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : 562 12.4 Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 12.4.1 0.80mm thick with zinc coating not less than 275gm/m² 12.4.2 0.63mm thick with zinc coating not less than 275gm/m² 563 12.5 Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² 564 12.6 Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand). 1.00mm thick with zinc coating not less than 275gm/m² 565 12.7 Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 12.7.1 0.80mm thick with zinc coating not less than 275gm/m² 12.7.2 0.63mm thick with zinc coating not less than 275gm/m² 566 12.8 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. 567 12.9 Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. 568 12.10 Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. 569 12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. 570 12.12 Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. 12.12.1 Corrugated serrated adjustable ridges 12.12.2 Plain wing adjustable ridges 12.12.3 Close fitting adjustable ridges 12.12.4 Unserrated adjustable hips 571 12.13 Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete: 12.13.1 Corrugated apron pieces 12.13.2 Eaves filler pieces 12.13.3 North light curves 12.13.4 ventilator curves 12.13.5 Barge boards 12.13.6 Ridge finials 12.13.7 Special north light curves 12.13.8 S type louvers 572 12.14 Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. 573 12.15 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 574 12.16 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete : 12.16.1 Ridges plain (500 - 600mm). 12.16.2 Flashings/ Aprons.( Upto 600 mm) 12.16.3 North light curves. 12.16.4 Barge board (Upto 300 mm) 12.16.5 Crimp curve 12.16.6 Gutter. (600 mm over all girth) 575 12.17 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.17.1 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. 12.17.2 2mm thick flat. 576 12.18 Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment. 12.18.1 10mm thick 12.18.2 16mm thick 577 12.19 Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete : 12.19.1 Red sand stone slab 12.19.2 White sand stone slab : 578 12.20 Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 579 12.21 Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturers specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. 580 12.22 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 581 12.23 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. 582 12.24 Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) 583 12.25 Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) 584 12.26 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase 585 12.27 Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe. 586 12.28 Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 12.28.1 100 mm diameter 12.28.2 150 mm diameter 587 12.29 Providing and fixing ISI marked sand cast iron rain water pipes. 12.29.1 100 mm dia minimum wall thickness 5mm 12.29.2 150 mm dia minimum wall thickness 5mm 588 12.30 Providing lead caulked joints to sand cast iron rain water pipes and fittings : 12.30.1 100 mm dia. Pipe 12.30.2 150 mm dia. Pipe 589 12.31 Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) : 12.31.1 Sand cast iron bend : 12.31.1.1 100 mm diameter 12.31.1.2 150 mm diameter 12.31.2 Sand cast iron plain shoes : 12.31.2.1 100 mm diameter 12.31.2.2 150 mm diameter 590 12.32 Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.32.1 75 mm diameter (minimum wall thickness 1.8mm) 12.32.2 110 mm diameter (minimum wall thickness 2.2mm) 591 12.33 Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.33.1 Coupler 12.33.1.1 75 mm (minimum wall thickness 1.8mm) 12.33.1.2 110 mm (minimum wall thickness 2.2mm) 12.33.2 Single push fit Coupler : 12.33.2.1 75 mm (minimum wall thickness 1.8mm) 12.33.2.2 110 mm (minimum wall thickness 2.2mm) 12.33.3 Single tee with door 12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) 12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) 12.33.4 Single tee without door 12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) 12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) 12.33.5 Bend 87.5° 12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) 12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) 12.33.6 Shoe (Plain) 12.33.6.1 75 mm Shoe (minimum wall thickness 1.8mm) 12.33.6.2 110 mm Shoe (minimum wall thickness 2.2mm) 592 12.34 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 12.34.1 75 mm (minimum wall thickness 1.8mm) 12.34.2 110 mm (minimum wall thickness 2.2mm) 593 12.35 Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. 594 12.36 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. 595 12.37 Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand) 12.37.1 Stone ware spout 12.37.2 Upvc spout (Pipe dia.110 mm) 596 12.38 Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise. 12.38.1 Base metal thickness 0.8mm up to span 15 meter 12.38.2 Base metal thickness 0.9mm , up to span 18 meter 12.38.3 Base metal thickness 1.0 mm, up to span 21 meter 12.38.4 Base metal thickness 1.1 mm, up to span 23 meter 12.38.5 Base metal thickness 1.2mm, up to span 25meter 12.38.6 Base metal thickness 1.3 mm, up to span 27 meter 12.38.7 Base metal thickness 1.4mm, up to span 29meter 12.38.8 Base metal thickness 1.5 mm, up to span 31 meter 12.38.9 Base metal thickness 1.6 mm, up to span 33 meter 12.38.10 Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. 12.38.11 Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. 12.38.12 Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. 597 12.39 Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, labour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. 598 12.40 Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). 599 12.41 Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All complete as per drawings, specification and as per direction of Engineer-in-Charge.Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately. 600 12.42 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 601 12.43 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. 602 12.44 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge : 603 12.44.1 With Type N - Normal 50 mm thick 604 12.44.2 With Type SE - Self Extinguishing type 50 mm thick. 605 12.45 Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. 606 12.46 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. 607 12.47 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. 608 12.48 Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. 609 12.49 Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge. 610 12.50 Supply and application of 48kg/m3 density & 50 mm thick with a tolerance of -2 + 6mm of Rockwool RB slabs unfaced (Binder<3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non- combustible when tested as per BS 476 Part 4 or A1 when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 611 12.51 Supply & Application of Rockwool RB slab 48kg density, 50mm thick wrapped in 200G vergine polythene bags for partition, ceiling (Under Deck insulation) conforming to IS: 8183 with tolerance of -2 +6mm of rock wool RB slabs unfaced (Binder <3.5%) conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested per EN 13501. . Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 612 12.52 Supply & Application of Rockwool RB 2 slab 64kg /m3, 50mm thick, with GI wire netting 24 SWG; fixing for NRC Value 1.00 for Acoustics, thermal & fire purpose conforming to and IS: 8133, IS: 8183 with tolerance of -2 + 6mm of RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Two random samples from each supplied batch will be tested for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 613 12.53 Supply & Application of Rockwool building roll (1.1mx10m) 48kg density, 50mm thick with FSK (foil scrim Kraft) aluminium foil facing for HVAC duct & building underdeck purpose conforming to IS: 8183, IS: 8183 and IS:8183 a tolerance of -2 +6 mm of Rockwool RB slabs unfaced (Binder < 3.5%) ; conforming to IS: 8183; /ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS: 476 Part 4 or Al when tested as per EN: 13501. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and it shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 614 12.54 Supply & Application of Rockwool Building Roll (1.1mX10m) 48kg density, 50mm thick with ALG (Alu & glass) mixture of Aluminium & glass facing for building underdeck application below metal sheet also conforming IS: 8183, IS: 8183 and IS: 8183 a tolerance of -2+6mm of rockwool RB slabs unfaced (Binder < 3.5%); conforming to IS: 8183/ASTM C 612 latest edition with amendments. Non-combustible when tested as per BS 476 Part 4 or Al when tested as per EN 13501. The maximum service temperature shall be 700°C. Shot content should be less than 2% for 500 microns & less than 10% for 250 microns when tested as per standard IS: 3144. Two random samples from each supplied batch will be test for shot content at the site. The melting point of the wool shall be more than 1000°C and wool shall be bio-soluble in accordance with EU directive 127/2008 or similar. All Above mentioned standard are as per latest edition with amendments. 615 12.55 Providing and fixing of minimum 12mm thick, 5 layered bubble Reflective thermal insulation made of 12 microns aluminum foil with minimum 97% Reflectivity on both outer sides, under both aluminum foil 4mm thick FR bubble insulation with Low Emissivity - 0.032 (ASTM1371), Fire Class A (ASTM E84) All five layers of insulation shall be stick with each other by registered manufacturer using hot process without using any kind of adhesive. Insulation shall be supplied in 1.10m wide roll width with 50mm wide factory-made cuts at both sides to joint another roll by using general stapler in case of new shed and adhesive in case of existing or self-supported roof. 12.55.1 Fixing of insulation on new work by laying horizontally on the purlins and perpendicular to the direction of purlins and fixing by using self- tapping screws at equal distance. Place and align the second roll of insulation parallel to the first roll and overlaps the adjacent rolls. After Insulation is fixed over the purlins the metal sheet is placed over insulation and drilled with self-tapping screws with purlins etc. complete, including all material and scaffolding. 12.55.2 Installation of insulation in Old Sheds where the sheets have been already fixed over the purlins so insulation shall be fixed under the purlins covering the roof bottom. Insulation roll to be unfolded at the bottom of the purlin horizontally and parallel to the roof and fixed by using the self- tapping screw with a washer at equal distance etc. Complete, including all material and scaffolding. 12.55.3 Insulation of Self-Supported Roof shall be applied under the roofing by using stud welding to the self- supported roof at a distance not be more than 300 mm in both directions. At each stud insulation roll shall be pushed against the studs so that it gets punctured and then non-returning washer has to be applied at the stud etc. complete, including all material and scaffolding. 616 12.56 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over- deck on ceiling surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM C 518, compressive strength of > 350 kPa listed as per ASTM C 1621, density of 34-36 kg/m³ as per ASTM D 1622, water absorption < 1% by volume as per ASTM C 272, oxygen index of minimum 24 as per ASTM D 2863 and Fire retardant property as per DIN 4102, with preferred stone or pre-cast tiles shall be laid over the XPS board with suitable grouting including providing pre-fabricated EPDM drain outlets (Cement Screed casting shall be done at the junction of roof and parapet walls), all as per the directions of Engineer-in-charge. 617 12.57 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size underdeck on ceiling surface, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. 618 12.58 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.58.1 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board 12.58.1.1 Flat surfaces 12.58.1.2 Curved surfaces 12.58.1.3 Sunk or raised mouldings 12.58.1.4 Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. 12.58.2 12.5 mm thick tapered edge gypsum board 12.58.2.1 Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). 12.58.2.2 Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) 12.58.2.3 Gypsum moisture resistant board. 12.58.2.4 Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. 12.58.3 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. 619 12.59 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.59.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 12.59.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 12.59.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. 12.59.4 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. 12.59.5 Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. 12.59.6 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. 12.59.7 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. 620 12.60 Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm center to centre, suspending the main C carrier and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring T with 12.60.1 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 12.60.2 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. 621 12.61 Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). 622 12.62 Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately): 12.62.1 12mm thick insulating board 12.62.1.1 Natural colour insulating board 12.62.1.2 White face insulating board 12.62.1.3 Flame retardant face insulating board 12.62.2 Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete 12.62.3 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete 12.62.4 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) 12.62.5 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns 623 12.63 Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. 624 12.64 Extra for providing and fixing ceiling to curved surfaces in narrow widths 625 12.65 Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately). 626 12.66 Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape 627 12.67 Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. 628 12.68 Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) : 12.68.1 With Type N - Normal 50 mm thick 12.68.2 With Type SE - Self Extinguishing type 50 mm thick 629 12.69 Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately). 12.69.1 costing upto 70/- per metre, 12.69.2 Rs 70- 150 per meter 12.69.3 Upto 200 per meter 630 12.70 Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 12.70.1 With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick 12.70.2 With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick 12.70.3 With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick 631 12.71 Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 632 12.72 Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al. Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc. As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system. 12.72.1 Standard White / Natural Satin Shade 12.72.2 Wooden Finish 633 12.73 Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. 12.73.1 Tile of 600 mm wide ,600 mm long and 0.5 mm thick 12.73.2 Plank of 600mm wide ,1200 mm long and 0.6mm thick 634 12.74 Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 635 12.75 Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 636 12.76 Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. 637 12.77 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance≥ 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking TGrid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling usinggalvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) 638 12.78 Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 639 12.79 Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 640 12.80 Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturers specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. 641 12.81 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 12.81.1 With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. 12.81.2 With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. 642 12.82 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cros‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 643 12.83 Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge. . 644 12.84 Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete . PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees) 645 12.85 Design built, supply and erection of Tensile (fabric) structure system including designing and fabrication in M.S. steel tubular structure as per Indian standard section as per approved design and shape including base plate, dash fastener, clits etc. Cutting, patterning, plotting and wielding of fabric with the help of tensile structure software. Fabric should be wielded by high frequency PVC wielding in proper line with PVC cader to be fixed on end of the fabric and to be stretched & fixed on M.S. design structure with the help of. M.S. Flat bar with self-taping screw. M.S. structure to be painted with one coat of epoxy primer with MRF PUpaint of approved colour in desired shape. With 1050 GSM tensile fabric 12.85.1 With precontraint tensile membrane 1050 GSM (20 years Warranty) 12.85.2 With precontraint tensile membrane 1050 GSM (15 Years warranty) 646 13.1 12 mm cement plaster of mix : 13.1.1 1:4 (1 cement : 4 sand) 13.1.2 1:6 (1 cement : 6 sand) 647 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix 13.2.1 1:4 (1 cement : 4 sand) 13.2.2 1:6 (1 cement : 6 sand) 648 13.3 20 mm cement plaster of mix : 13.3.1 1:4 (1 cement : 4 sand) 13.3.2 1:6 (1 cement : 6 sand) 649 13.4 12 mm cement plaster finished with a floating coat of neat cement of mix : 13.4.1 1:3 (1 cement : 3 sand) 13.4.2 1:4 (1 cement : 4 sand) 650 13.5 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 13.5.1 1:3 (1 cement : 3 sand) 13.5.2 1:4 (1 cement : 4 sand) 651 13.6 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). 652 13.7 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. 653 13.8 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 654 13.9 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. 655 13.10 Neat cement punning 656 13.11 Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. 657 13.12 Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. 658 13.13 Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. 659 13.14 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 660 13.15 Extra for plastering 13.15.1 Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof 13.15.2 Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof 661 13.16 Extra for plastering on circular work not exceeding 6 m in radius: 13.16.1 In one coat 13.16.2 In two coats 662 13.17 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: 13.17.1 In one coat 13.17.2 In two coats 663 13.18 Extra for plastering Spherical, Groined ceiling, Flewing soffits. 13.18.1 Spherical ceiling 13.18.2 Groined ceiling 13.18.3 Flewing soffits 664 13.19 Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately). 665 13.20 Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 666 13.21 Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. 667 13.22 Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). 668 13.23 Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 669 13.24 Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. 670 13.25 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. 671 13.26 Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. 672 13.27 Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete 673 13.27.1 G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. 13.27.2 Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. 674 13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) : 13.28.1 Flush Band 13.28.2 Sunk Band 13.28.3 Raised Band 13.28.4 Moulded Band 675 13.29 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand): 13. 29.1 Flush Band 13. 29.2 Sunk Band 13. 29.3 Raised Band 13. 29.4 Moulded Band 676 13.30 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). 677 13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 sand) : 13.31.1 Flush / Ruled/ Struck or weathered pointing. 13.31.2 Raised and cut pointing 13.31.3 Sunk pointing 678 13.32 Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand). 13.32.1 Flush/ Ruled pointing 13.32.2 Raised and cut pointing 679 13.33 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) 680 13.34 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing 681 13.35 Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. 682 13.36 Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. 683 13.37 Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes. 13.37.1 size 1200mmx1800mm 13.37.2 size 1200mmx2400mm 13.37.3 size 1200mmx3000mm 684 13.38 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 685 13.39 Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. 686 13.40 Extra for lining out plaster to imitate stone or concrete blocks walling. 687 13.41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. 688 13.42 Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. 689 13.43 White washing with lime to give an even shade: New work (three or more coats) 690 13.44 Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. 691 13.45 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two or more coat on new work. 692 13.46 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 693 13.47 Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.47.1 One coat. 13.47.2 Two coats. 694 13.48 Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.48.1 One coat. 13.48.2 Two coats. 695 13.49 Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. 696 13.50 Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). 697 13.51 Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. 698 13.52 Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface 699 13.53 Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) 700 13.54 Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.54.1 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture 13.54.2 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. 13.54.3 Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. 701 13.55 Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: 13.55.1 One coat 13.55.2 Two coats 702 13.56 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. 13.56.1 On steel work 13.56.2 On concrete work 703 13.57 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. 704 13.58 Applying a coat of mordant solution on G.S. sheet : 13.58.1 With a solution of 38 gms of copper acetate in a litre of soft water 13.58.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. 705 13.59 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 13.59.1 75 mm diameter pipes 13.59.2 100 mm diameter pipes 13.59.3 150 mm diameter pipes 706 13.60 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 13.60.1 75 mm diameter pipes 13.60.2 100 mm diameter pipes 13.60.3 150 mm diameter pipes 707 13.61 Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) 708 13.62 Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. 709 13.63 Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. 710 13.64 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 711 13.65 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 712 13.66 Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.66.1 One coat. 13.66.2 Two coats. 713 13.67 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 13.67.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 13.67.2 With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. 13.67.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. 714 13.68 Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. 715 13.69 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. 716 13.70 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 717 13.71 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work 718 13.72 Varnishing with varnish of approved brand and manufacture: 13.72.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. 13.72.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. 719 13.73 French spirit polishing: Two or more coats on new works including a coat of wood filler. 720 13.74 Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. 721 13.75 Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. 722 13.76 Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. 723 13.77 Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. 724 13.78 Lettering with black Japan paint of approved brand and manufacture. 725 13.79 Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. 726 13.80 Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base. 13.80.1 0.8-1.2mm thickness 13.80.2 2.0-2.5mm thickness 727 13.81 Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. 728 13.82 Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa. 13.82.1 6 mm thick plaster for internal walls 13.82.2 8 mm thick plaster for external walls exposed to weather. 729 13.83 Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch) 13.83.1 ACP sheet 2mm thick 13.83.2 ACP sheet 3mm thick 13.83.3 ACP sheet 4mm thick 730 13.84 Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch) 13.84.1 PVC foam sheet 3.0 mm thick 13.84.2 PVC foam sheet 5.0 mm thick 13.84.3 PVC foam sheet 8.0 mm thick 731 13.85 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 732 13.86 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. 733 13.87 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. 734 13.88 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) 735 13.89 Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. 736 13.90 Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. 737 13.91 Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. 738 13.92 Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge. 739 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). 740 14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : 14.2.1 Door chowkhats 14.2.2 Window chowkhats 14.2.3 Clerestory window chowkhats 741 14.3 Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. 742 14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. 743 14.5 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 14.5.1 Float glass panes of thickness 4 mm 14.5.2 Float glass panes of thickness 5.5 mm 744 14.6 Renewing glass panes with now wooden fillets wherever necessary: 14.6.1 Float glass panes of thickness 4 mm 14.6.2 Float glass panes of thickness 5.5 mm 745 14.7 Renewing glass panes and refixing existing wooden fillets: 14.7.1 Float glass panes of thickness 4 mm 14.7.2 Float glass panes of thickness 5.5 mm 746 14.8 Supplying and fixing new wooden fillets wherever necessary: 14.8.1 2nd class teak wood fillets 14.8.2 Haldu/Bija/Kail wood fillets. 747 14.9 Renewal of old putty of glass panes (length). 748 14.10 Refixing old glass panes with putty and nails. 749 14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets). 750 14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 751 14.13 Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead : 14.13.1 Red/ white sand stone slabs 30 to 50 mm thick. 752 14.14 Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.14.1 Sal wood battens. 753 14.15 Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead : 14.15.1 Not exceeding 4.00 metres in length. 14.15.1.1 Sal wood beams 14.15.1.2 Haldu/Bija/Kail wood fillets. 14.15.2 Above 4.00 metres and upto 5.00 metres length. 14.15.2.1 Sal wood beams 14.15.2.2 Haldu/Bija/Kail wood fillets. 754 14.16 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. 755 14.17 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. 756 14.18 Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. 757 14.19 Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. 758 14.20 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. 14.20.1 Wheel 50 mm dia. and below. 14.20.2 Wheel above 50 mm dia. 759 14.21 Providing and fixing 25 mm thick shutters for cupboard etc. : 14.21.1 Panelled or panelled and glazed shutters : 14.21.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.2 Glazed shutters : 14.21.2.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 14.21.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 760 14.22 Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with: 14.22.1 Second class teak wood. 14.22.2 Hard wood, finger jointed 761 14.23 Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 14.23.1 20 mm diameter. 14.23.2 25 mm diameter. 762 14.24 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. 763 14.25 Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with: 14.25.1 Sal wood. 14.25.2 Haldu/Bija/Kail wood. 764 14.26 White washing with lime old work to give an even shade : 14.26.1 two or more coats 14.26.2 one or more coats 765 14.27 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 766 14.28 Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. 767 14.29 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). 768 14.30 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 769 14.31 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). 770 14.32 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 14.32.1 75 mm diameter pipes 14.32.2 100 mm diameter pipes 14.32.3 150 mm diameter pipes 771 14.33 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work : 14.33.1 75 mm diameter pipes 14.33.2 100 mm diameter pipes 14.33.3 150 mm diameter pipes 772 14.34 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 14.34.1 75 mm diameter pipes 14.34.2 100 mm diameter pipes 14.34.3 150 mm diameter pipes 773 14.35 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) 774 14.36 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. 775 14.37 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. 776 14.38 Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. 777 14.39 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. 778 14.40 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. 779 14.41 French spirit polishing: One or more coats on old work. 780 14.42 Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. 781 14.43 Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor 14.43.1 One or more coats on old work. 782 14.44 Polishing on wood work with readymade wax polish of approved brand and manufacture : 14.44.1 Old work 783 14.45 Re-lettering with black Japan paint of approved brand and manufacture. 784 14.46 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 785 14.47 Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin : 14.47.1 32 mm dia 14.47.2 40 mm dia 786 14.48 Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturers specification. One or more coats on old work. 787 14.49 Finishing walls with water proofing cement paint of required shade : 14.49.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. 14.49.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. 788 14.50 Finishing walls with textured exterior paint of required shade : 14.50.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 14.50.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. 789 14.51 Finishing walls with Acrylic Smooth exterior paint of required shade : 14.51.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). 14.51.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). 790 14.52 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 14.52.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 14.52.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). 791 14.53 Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : 14.53.1 One or more coats applied on walls @ 0.85 ltr/10 sqm. 14.53.2 Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm 14.53.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. 792 14.54 Varnishing with varnish of approved brand and manufacture: 14.54.1 One or more coats with copal varnish. 14.54.2 One or more coats with spar varnish. 793 14.55 Melamine polishing on wood work (one or more coat). Old work 794 14.56 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 795 14.57 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. 796 14.58 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department. 14.58.1 Rough chiseled dressed stone 14.58.2 Fine dressed stone 797 14.59 Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) 798 14.60 Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). 799 14.61 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). 800 14.62 Colour washing with lime to give an even shade: 14.62.1 (one or more coats) 14.62.2 (two or more coats) 801 14.63 Conducting adequate nos. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. 802 14.64 Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. 803 14.70 Rebaring of TMT bars by drilling hole & embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete. 14.70.1 8 mm dia bar 10 mm dia hole 14.70.2 10 mm dia bar 12 mm dia hole 14.70.3 12 mm dia bar 16 mm dia hole 14.70.4 16 mm dia bar 20 mm dia hole 14.70.5 20 mm dia bar 25 mm dia hole 14.70.6 25 mm dia bar 32 mm dia hole 14.70.7 32 mm dia bar 40 mm dia hole 804 14.71 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete. 14.71.1 125x70x4 mm (ordinary type) 14.71.2 100x70x4 mm (ordinary type) 14.71.3 75x65x4 mm (heavy type) 14.71.4 75x40x2.5 mm (ordinary type) 14.71.5 50x40x2.5 mm (ordinary type) 805 14.72 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. 806 14.73 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. 807 14.74 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 808 14.75 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. 809 14.77 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 14.77.1 Bars upto 12 mm diameter 14.77.2 Bars above 12 mm diameter 810 14.78 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. 14.78.1 Upto and including 12mm dia 811 14.83 Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) 14.83.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work 14.83.2 Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. 14.83.3 Epoxy injection grout in concrete/RCC work of approved make 812 14.85 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. 813 14.88 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-incharge. 814 15.1 Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. 815 15.2 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). 816 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 817 15.4 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. 818 15.5 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. 819 15.6 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 820 15.6.1 In lime mortar with old mughal bricks. 15.6.2 In lime mortar. 15.6.3 In cement mortar. 821 15.7 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) : 15.7.1 From brick work in lime mortar. 15.7.2 From brick work in cement mortar. 822 15.8 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge: 15.8.1 In lime mortar. 15.8.2 In cement mortar. 823 15.9 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge: 15.9.1 In lime mortar. 15.9.2 In cement mortar. 824 15.10 Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) : 15.10.1 In lime mortar. 15.10.2 In cement mortar. 825 15.11 Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. 15.11.1 For thickness of tiles 10 mm to 25 mm. 15.11.2 For thickness of tiles above 25 mm and upto 40 mm. 826 15.12 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 827 15.13 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 828 15.14 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.14.1 Of area 3 sq. metres and below. 15.14.2 Of area beyond 3 sq. metres. 829 15.15 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: 15.15.1 Of area 3 sq. metres and below. 15.15.2 Of area beyond 3 sq. metres. 830 15.16 Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead: 15.16.1 Of sectional area below 40 square centimetres. 15.16.2 Of sectional area 40 square centimetres and above. 831 15.17 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres : 15.17.1 Of sectional area below 40 square centimetres. 15.17.2 Of sectional area 40 square centimetres and above. 832 15.18 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres : 15.18.2 Of sectional area below 40 square centimetres. 15.18.1 Of sectional area 40 square centimetres and above. 833 15.19 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: 15.19.1 R.S. Joists 15.19.2 Channels, angles, tees and flats 834 15.20 Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. 835 15.21 Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. 836 15.22 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres 837 15.23 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. 838 15.24 Extra for marking of structural steel work required to be re- erected. 839 15.25 Removal of old Tarfelt i/c disposal as directed by Engineer in charge. 840 15.26 Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 841 15.27 Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: 15.27.1 G.S. Sheet 15.27.2 Asbestos/ Non asbestors sheet 842 15.28 Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 843 15.29 Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 844 15.30 Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. 845 15.31 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of : 15.31.1 T’ or ‘L’ iron or pipe 15.31.2 R.C.C. 846 15.32 Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. 847 15.33 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 848 15.34 Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. 849 15.35 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. 850 15.36 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : 15.36.1 Upto 10 mm thick 15.36.2 Thickness above 10 mm upto 25 mm 15.36.3 Thickness above 25 mm upto 40 mm 851 15.37 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: 15.37.1 Thickness upto 40 mm 15.37.2 Thickness above 40 mm upto 75 mm 852 15.38 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 853 15.39 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 15.39.1 75 to 80 mm dia pipe. 15.39.2 100 mm dia pipe 15.39.3 150 mm dia pipe 854 15.40 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge : 15.40.1 15 mm to 40 mm nominal bore 15.40.2 Above 40 mm nominal bore 855 15.41 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: 15.41.1 Upto 150 mm diameter 15.41.2 Above 150 mm dia upto 300 mm dia. 15.41.3 Above 300 mm diameter 856 15.42 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. 857 15.43 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. 858 15.44 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 859 15.45 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 860 15.46 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres 15.46.1 Upto 150 mm diameter 15.46.2 Above 150 mm diameter 861 15.47 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. 862 15.48 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 863 15.49 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge. 864 15.50 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps: 15.50.1 100 mm diameter 15.50.2 150 mm diameter 15.50.3 200 mm diameter 15.50.4 250 mm diameter 15.50.5 300 mm diameter 15.50.6 350 mm diameter 15.50.7 400 mm diameter 15.50.8 440 mm diameter 865 15.51 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead : 15.51.1 Rectangular manhole 90x80 cm and 45 cm deep 15.51.2 Rectangular manhole 120x90 cm and 90 cm deep. 15.51.3 Rectangular arch type manhole 140x90cm and 2.45m deep. 15.51.4 Circular manhole 122 cm diameter and 1.68 m deep 866 15.52 Extra for depth of manholes dismantled: 15.52.1 Rectangular manhole 90x80 cm and beyond 45 cm depth. 15.52.2 Rectangular manhole 120x90 cm and beyond 90 cm depth. 15.52.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). 15.52.4 Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). 867 15.53 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. 868 15.54 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : 869 15.55 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 870 15.56 Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 871 15.57 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. 872 15.58 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge : 15.58.1 Water bound macadam road 15.58.2 Bituminous road 873 15.59 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge : 15.59.1 Up to 600 mm diameter 15.59.2 Above 600 mm diameter 874 15.60 Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge 15.60.1 Up to 150 mm diameter 15.60.2 Above 150 mm diameter 875 15.61 Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable materials within 50 metres lead. 876 15.62 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead: 15.62.1 120 x 120 cm (outside to outside) 15.62.2 210 x 120 cm (outside to outside) 877 15.63 Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. 878 15.64 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 879 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. 880 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 17.2.2 W.C. pan with ISI marked black solid plastic seat and lid 17.2.3 Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. 881 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid. 882 17.4 Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend. 883 17.5 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 884 17.6 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.6.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 17.6.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. 17.6.3 Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern. 17.6.4 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern. 885 17.7 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever require 17.7.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. 17.7.2 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. 17.7.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. 17.7.4 Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. 886 17.8 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required : 17.8.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern. 17.8.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. 17.8.3 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. 17.8.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. 887 17.9 Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. 888 17.10 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. 889 17.11 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 17.11.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 17.11.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. 17.11.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. 17.11.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. 17.11.6 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. 17.11.7 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. 17.11.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. 17.11.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. 17.11.10 Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). 17.11.11 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap 17.11.12 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. 890 17.12 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 891 17.13 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. 892 17.14 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 17.14.1 Kitchen sink with drain board 17.14.1.1 510x1040 mm bowl depth 250mm. 17.14.1.2 510x1040 mm bowl depth 225mm. 17.14.1.3 510x1040 mm bowl depth 200mm. 17.14.1.4 510x1040 mm bowl depth 178mm. 17.14.2 Kitchen sink without drain board 17.14.2.1 610x510 mm bowl depth 200 mm. 17.14.2.2 610x460 mm bowl depth 200 mm. 17.14.2.3 470x420 mm bowl depth 178 mm. 893 17.15 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required : 17.15.1 Size450x300x150mm 17.15.2 Size600x450x200mm 894 17.16 Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. 895 17.17 Providing and fixing white vitreous china water closet squatting pan (Indian type) 17.17.1 Long pattern W.C. pan of size 580 mm 17.17.2 Orissa pattern W.C. pan of size 580x440 mm 896 17.18 Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm 897 17.19 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 898 17.20 Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. 899 17.21 Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: 17.21.1 250x130x30 mm 17.21.2 250x125x25 mm 900 17.22 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity 17.22.1 White 17.22.2 coloured 901 17.23 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity) 17.23.1 White 17.23.2 Coloured 902 17.24 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 17.24.1 White 17.24.2 Black 17.24.3 Coloured (other than black and white) 903 17.25 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 904 17.26 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively. 905 17.27 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm. 906 17.28 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 907 17.29 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 17.29.1 Flat back wash basin of size 630x450mm. 17.29.2 Flat back wash basin of size 550x400mm. 17.29.3 Angle back wash basin of size 600x480mm. 17.29.4 Angle back wash basin of size 400x400mm. 17.29.5 Flat back wash basin of size 450x300mm. 17.29.6 Surgeon type wash basin of size 660x460mm. 908 17.30 Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm. 909 17.31 Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings: 17.31.1 Size 450x300x150 mm. 17.31.2 Size 600x450x200 mm. 910 17.32 Providing and fixing soil, waste and vent pipes: 17.32.1 Sand cast iron socket and spigot (S&S) pipe as per IS: 1729 17.32.1.1 75 mm dia with wall thickness of 5 mm 17.32.1.2 100 mm dia with wall thickness of 5 mm 17.32.2 Spun cast iron socket and spigot (S&S) pipe as per IS: 3989 17.32.2.1 75 mm dia with wall thickness of 3.5 mm 17.32.2.2 100 mm dia with wall thickness of 4 mm 17.32.2.3 150mm dia with wall thickness of 5mm 17.32.3 Hubless Centrifugally cast (spun) iron pipe epoxy coated in side & out side including complete coupling assembly (EPDM rubber gasket stainless steel claim and external metallic/ protective shield as per IS:15905) 17.32.3.1 75 mm dia with wall thickness of 3.5 mm 17.32.3.2 100 mm dia with wall thickness of 3.5mm 17.32.3.3 150mm dia with wall thickness of 4 mm 911 17.33 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 ( 1 cement : 2 sand) in S.C.I./ C.I. Pipes : 17.33.1 75 mm dia pipe 17.33.2 100 mm dia pipe 912 17.34 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : 17.34.1 For 75 mm dia pipe 17.34.2 For 100 mm dia pipe 17.34.3 For 150 mm dia pipe 913 17.35 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.35.1 150 mm dia 17.35.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.35.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm 17.35.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 17.35.2 100 mm dia 17.35.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.35.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm 17.35.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 17.35.3 75 mm dia 17.35.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5 mm 17.35.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm 17.35.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 914 17.36 Providing and fixing plain bend of required degree. 17.36.1 150 mm dia 17.36.1.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.1.2 Spun cast iron as per IS – 3989 minimum wall thickness 5 mm 17.36.1.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3.5 mm 17.36.2 100 mm dia 17.36.2.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.2.2 Spun cast iron as per IS – 3989 minimum wall thickness 4 mm 17.36.2.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 17.36.3 75 mm dia 17.36.3.1 Sand cast iron as per IS – 1729 minimum wall thickness 6.5mm 17.36.3.2 Spun cast iron as per IS – 3989 minimum wall thickness 3.5 mm 17.36.3.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 3 mm 915 17.37 Providing and fixing heel rest sanitary bend 17.37.1 100 mm dia 17.37.1.1 Sand cast iron as per IS - 1729 17.37.1.2 Spun cast iron as per IS - 3989 17.37.2 75 mm dia 17.37.2.1 Sand cast iron as per IS - 1729 17.37.2.2 Spun cast iron as per IS - 3989 916 17.38 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 17.38.1.1 150X150X150X150 17.38.1.2 Sand cast iron as per IS - 3989 17.38.2 100x100x100x100mm 17.38.2.1 Sand cast iron as per IS - 1729 17.38.2.2 Spun cast iron as per IS - 3989 17.38.3 75x75x75x75mm 17.38.3.1 Sand cast iron as per IS - 1729 17.38.3.2 Spun cast iron as per IS - 3989 917 17.39 Providing and fixing double equal plain junction of required degree. 17.39.1 150X150X150X150 mm 17.39.1.1 Sand cast iron as per IS - 3989 17.39.2 100x100x100x100mm 17.39.2.1 Sand cast iron as per IS – 1729 17.39.2.2 Spun cast iron as per IS – 3989 17.39.2.3 Hubless cast(spun) iron as per IS- 15905 17.39.3 75x75x75x75 mm 17.39.3.1 Sand cast iron as per IS – 1729 17.39.3.2 Spun cast iron as per IS – 3989 17.39.3.3 Hubless cast(spun) iron as per IS- 15905 918 17.40 Providing and fixing single equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 17.40.1 150X150X150 mm 17.40.1.1 Spun cast iron as per IS - 3989 17.40.2 100x100x100 mm 17.40.2.1 Sand cast iron as per IS - 1729 17.40.2.2 Spun cast iron as per IS - 3989 17.40.3 75x75x75 mm 17.40.3.1 Sand cast iron as per IS - 1729 17.40.3.2 Spun cast iron as per IS - 3989 919 17.41 Providing and fixing single equal plain junction of required degree : 17.41.1 150X150X150 mm 17.41.1.1 Spun cast iron as per IS - 3989 17.41.2 100x100x100 mm 17.41.2.1 Sand cast iron as per IS – 1729 17.41.2.2 Spun cast iron as per IS – 3989 17.41.2.3 Hubless cast(spun) iron as per IS- 15905 17.41.3 75x75x75 mm 17.41.3.1 Sand cast iron as per IS – 1729 17.41.3.2 Spun cast iron as per IS – 3989 17.41.3.3 Hubless cast(spun) iron as per IS- 15905 920 17.42 Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x75x75 mm 17.42.1 Sand cast iron as per IS - 1729 17.42.2 Spun cast iron as per IS - 3989 921 17.43 Providing and fixing double unequal plain junction of required degree: 100x100x75x75 mm 17.43.1.1 Sand cast iron as per IS – 1729 17.43.1.2 Spun cast iron as per IS – 3989 17.43.1.3 Hubless cast(spun) iron as per IS- 15905 922 17.44 Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm 17.44.1 Sand cast iron as per IS - 1729 17.44.2 Spun cast iron as per IS - 3989 923 17.45 Providing and fixing single unequal plain junction of required degree : 100x100x75 mm 17.45.1 Sand cast iron as per IS – 1729 17.45.2 Spun cast iron as per IS – 3989 17.45.3 Hubless cast(spun) iron as per IS- 15905 924 17.46 Providing and fixing double equal plain invert branch of required degree: 17.46.1 100x100x100x100 mm 17.46.1.1 Sand cast iron as per IS - 1729 17.46.1.2 Sand cast iron as per IS - 3989 17.46.1.3 Hubless cast(spun) iron as per IS- 15905 17.46.2 75x75x75x75 mm 17.46.2.1 Sand cast iron as per IS - 1729 17.46.2.2 Spun cast iron as per IS - 3989 925 17.47 Providing and fixing single equal plain invert branch of required degree: 17.47.1 100x100x100 mm 17.47.1.1 Sand cast iron as per IS - 1729 17.47.1.2 Sand cast iron as per IS - 3989 17.47.1.3 Hubless cast(spun) iron as per IS- 15905 17.47.2 75x75x75 mm 17.47.2.1 Sand cast iron as per IS - 1729 17.47.2.2 Sand cast iron as per IS - 3989 17.47.2.3 Hubless cast(spun) iron as per IS- 15905 926 17.48 Providing and fixing double unequal invert branch of required degree : 100x100x75x75 mm 17.48.1 Sand cast iron as per IS - 1729 17.48.2 Spun cast iron as per IS - 3989 927 17.49 Providing and fixing single unequal plain invert branch of required degree : 100x100x75 mm 17.49.1 Sand cast iron as per IS - 1729 17.49.2 Spun cast iron as per IS - 3989 17.49.3 Hubless cast(spun) iron as per IS- 15905 minimum wall thickness 928 17.50 Providing and fixing sand cast iron S&S off sets as per IS: 1729 17.50.1 76 mm off sets 17.50.1.1 With 75 mm dia pipe 17.50.1.2 With 100 mm dia pipe 17.50.2 114 mm off sets 17.50.2.1 With 75 mm dia pipe 17.50.2.2 With 100 mm dia pipe 17.50.3 152 mm off sets 17.50.3.1 With 75 mm dia pipe 17.50.3.2 With 100 mm dia pipe 929 17.51 Providing and fixing sand cast iron S&S off sets as per IS: 3989. 17.51.1 75 mm off sets 17.51.1.1 With 75 mm dia pipe 17.51.1.2 With 100 mm dia pipe 17.51.1.3 With 150 mm dia pipe 17.51.2 150 mm off sets 17.51.2.1 With 75 mm dia pipe 17.51.2.2 With 100 mm dia pipe 17.51.2.3 With 150 mm dia pipe 930 17.52 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete : 17.52.1 100 mm 17.52.1.1 Sand cast iron as per IS - 1729 17.52.1.2 Spun cast iron as per IS - 3989 17.52.2 75 mm 17.52.2.1 Sand cast iron as per IS - 1729 17.52.2.2 Spun cast iron as per IS - 3989 931 17.53 Providing and fixing terminal guard: 17.53.1 150mm 17.53.1.1 Sand cast iron as per IS - 1729 17.53.1.2 Spun cast iron as per IS - 3989 17.53.1.3 Hubless cast(spun) iron as per IS- 15905 17.53.2 100 mm 17.53.2.1 Sand cast iron as per IS - 1729 17.53.2.2 Spun cast iron as per IS - 3989 17.35.2.3 Hubless cast(spun) iron as per IS-15905 17.53.3 75 mm 17.53.3.1 Sand cast iron as per IS - 1729 17.53.3.2 Spun cast iron as per IS - 3989 17.53.3.3 Hubless cast(spun) iron as per IS- 15905 932 17.54 Providing and fixing collar: 17.54.1 100 mm 17.54.1.1 Sand cast iron S & S as per IS - 1729 17.54.1.2 Sand cast iron S & S as per IS - 3989 17.54.2 75 mm 17.54.2.1 Sand cast iron S & S as per IS - 1729 17.54.2.2 Sand cast iron S & S as per IS- 3989 933 17.55 Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: 17.55.1 150mm 17.55.2 100 mm 17.55.3 75 mm 934 17.56 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 17.56.1 100 mm dia 17.56.2 75 mm dia 935 17.57 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 17.57.1 100 mm inlet and 100 mm outlet 17.57.1.1 Spun cast iron S & S as per IS: 3989. 17.57.1.2 Sand Cast iron S & S as per IS: 1729. 17.57.1.3 Hubless cast(spun) iron as per IS-15905 17.57.2 100 mm inlet and 75 mm outlet 17.57.2.1 Sand cast iron S & S as per IS - 3989 17.57.2.2 Spun Cast iron S & S as per IS- 1729. 17.57.2.3 Hubless cast(spun) iron as per IS- 15905 936 17.58 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) 17.58.1 75 mm diameter 17.58.2 110 mm diameter 937 17.59 Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 17.59.1 Coupler 17.59.1.1 75 mm 17.59.1.2 110 mm 17.59.2 Single pushfit Coupler 17.59.2.1 75 mm 17.59.2.2 110 mm 17.59.3 Single tee with door 17.59.3.1 75x75x75 mm 17.59.3.2 110x110x110 mm 17.59.4 Single tee without door 17.59.4.1 75x75x75 mm 17.59.4.2 110x110x110 mm 17.59.5 Bend 87.50 17.59.5.1 75 mm bend 17.59.5.2 110 mm bend 938 17.60 Providing and fixing Unplasticised - PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. 17.60.1 75 mm 17.60.2 110 mm 939 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet 940 17.62 Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, and washers of size 25x6mm, one bolts on each side of the pipe. 17.62.1 Total bracket length 580mm of approved shape and design (for single, 100mm dia pipe). 17.62.2 Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes). 17.62.3 Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes). 941 17.63 Cutting chases in brick masonry walls (clay brick/flyash brick/AAC blocks) for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement : 3 sand :6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 sand) : 17.63.1 100 mm dia 17.63.2 75 mm dia 17.63.3 50 mm dia 942 17.64 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.64.1 Semi rigid pipe 17.64.1.1 32 mm dia 17.64.1.2 40 mm dia 17.64.2 Flexible pipe (only in residential & complaxes) 17.64.2.1 32 mm dia 17.64.2.2 40 mm dia 943 17.65 Providing and fixing 100 mm sand cast Iron grating for gully trap. 944 17.66 Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. 945 17.67 Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 946 17.68 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shape with 6 mm thick hard board backing 17.68.1 Circular shape 450mm dia. 17.68.2 Rectangular shape 453x357mm 17.68.3 Oval shape 450x350mm (outer dimensions) 17.68.4 Rectangular shape 1500x450 mm 947 17.69 Providing and fixing glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 948 17.70 Providing and fixing toilet paper holder: 17.70.1 C.P. brass 17.70.2 Vitreous china 949 17.71 Providing and fixing CP brass waste coupling of approved quality and make for sink and wash basin. 17.71.1 Waste coupling 31mm of 79mm length and 62mm breadth 17.71.2 Waste coupling 38mm of 83mm length and 77mm breadth 950 17.72 Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. 951 17.73 Providing and fixing CP brass towel rail of approved quality and make 17.73.1 600x20mm 17.73.2 450x20mm 952 17.74 Providing and fixing CP brass towel ring of approved quality and make 200mm dia ring 953 17.75 Providing and fixing CP brass soap dish of approved quality and make 954 17.76 Providing and fixing CP brass Urinal spreader of approved quality and make 955 17.77 Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. 956 17.78 Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification. 17.78.1 100 mm dia. 957 17.79 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. 17.79.1 Waste coupling 31mm dia of 79mm length and 62mm breadth weighing not less than 45gms. 17.79.2 Waste coupling 38mm dia of 83mm length and 77mm breadth, weighing not less than 60gms. 958 17.80 Providing and fixing PTMT Bottle Trap for Wash basin and sink. 17.80.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. 17.80.2 Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263gms. 959 17.81 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. 960 17.82 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. 961 17.83 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 17.83.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. 17.83.2 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. 962 17.84 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms. 963 17.85 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. 964 17.86 Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. 965 17.87 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 966 17.88 Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc chromate yellow primer (of approved quality) on the outside surface of the cistern, flush pipe, other fittings, etc. complete for new work. 967 17.89 Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface of the cistern, flush pipe, other fittings, etc. complete including polishing of wooden seat and lid and cleaning of W.C. pan with acid wherever necessary. 968 17.90 Repainting C.I. cistern with synthetic enamel paint of approved colour brand and manufacture on the outside surface of cistern flush pipe, other fittings etc. complete. 969 17.91 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 17.91.1 75 mm diameter pipe 17.91.2 100 mm diameter pipe 17.91.3 150 mm diameter pipe 970 17.92 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic enamel paint of any colour such as chocolate, grey or buff etc : 17.92.1 75 mm diameter pipe 17.92.2 100 mm diameter pipe 17.92.3 150 mm diameter pipe 971 17.93 Repainting bath tub of size 1700x730x430mm with enamel paint. 972 17.94 Providing and laying Ceramic glazed half round pipe drain (having thickness 9 to 10mm) of approved make in colours such as White, Ivory, Grey, or any other colour, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. 17.94.1 100 mm dia half round pipe 17.94.2 150 mm dia half round pipe 17.94.3 200mm dia half round pipe 973 17.99 Construction of manually operated fire based incinerator for girls-toilet i/c (i)   Fire and ash collection chamber 0.60x0.60 m, made of calcium silicate bricks, having 12mm dia steel bars grating @10 cm c/c, i/c MS mesh weldedon top including 300 mm x 450 mm MS openable door of half grill and half MS plate (3mm thick ).(ii)     0.40 m X 0.40 m duct made of 1.6 mm thick MS sheet for dropping napkins from the toilet opening.(iv) 150mm dia Class C heavy duty MS pipe conforming to IS 3589/1239 for gas emission with cowel, up to 2.10 meter height above terrace level.(v) Opening in wall having MS flap (1.6mm thick) of size 0.25X 0.25 m, finished with granite.etc complete as per standard drawing no. 5313-B-NB4-9919- R1 dated 21.02.2017 17.99.1 For ground floor buildings. 17.99.2 For Ground floor & Ist floor buildings. 17.99.3 Add extra for every additional floor above Ist floor. 974 17.95 Providing and fixing coupler for PVC pipes & fittings waste/rain water/drainage disposal of superior Indian make (as approved by Engineer incharge) i/c jointing with rubber rings, adhesive, lubricant,solvent cement PVC clips or burried underground i/c making necessary chases and holes in walls, floors or trenching complete with making good or i/c excavation and refilling as per site requirement with testing etc.complete. FOR WASH BASIN CONNECTION (40mm diameter) 975 18.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 18.6.1 Internal work - Exposed on wall 18.6.1.1 15 mm nominal outer dia Pipes. 18.6.1.2 20 mm nominal outer dia .Pipes. 18.6.1.3 25 mm nominal outer dia .Pipes. 18.6.1.4 32 mm nominal outer dia Pipes. 18.6.1.5 40 mm nominal outer dia Pipes. 18.6.1.6 50 mm nominal outer dia .Pipes. 18.6.2 Concealed work including cutting chases and making good the walls etc. 18.6.2.1 15 mm nominal outer dia .Pipes. 18.6.2.2 20 mm nominal outer dia .Pipes. 18.6.2.3 25 mm nominal outer dia Pipes. 18.6.2.4 32 mm nominal outer dia Pipes. 976 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work 18.7.1 15 mm nominal outer dia Pipes. 18.7.2 20 mm nominal outer dia .Pipes. 18.7.3 25 mm nominal outer dia Pipes. 18.7.4 32 mm nominal outer dia .Pipes. 18.7.5 40 mm nominal outer dia Pipes. 18.7.6 50 mm nominal outer dia .Pipes. 18.7.7 62.50 mm nominal inner dia Pipes. 18.7.8 75 mm nominal inner dia .Pipes. 18.7.9 100mm nominal inner dia .Pipes. 18.7.10 150 mm nominal inner dia Pipes. 977 18.8 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 18.8.1 Internal work - Exposed on wall 18.8.1.1 15 mm dia. nominal bore 18.8.1.2 20 mm dia. nominal bore 18.8.1.3 25 mm dia. nominal bore 18.8.1.4 32 mm dia. nominal bore 18.8.1.5 40 mm dia. nominal bore 18.8.1.6 50 mm dia. nominal bore 18.8.2 Concealed pipe including painting with anti corrosivebitumastic paint, cutting chases and making good the wall. 18.8.2.1 15 mm dia nominal bore 18.8.2.2 20 mm dia nominal bore 18.8.3 External work : including trenching and refilling etc. 18.8.3.1 15 mm dia. nominal bore 18.8.3.2 20 mm dia. nominal bore 18.8.3.3 25 mm dia. nominal bore 18.8.3.4 32 mm dia. nominal bore 18.8.3.5 40 mm dia. nominal bore 18.8.3.6 50 mm dia. nominal bore 18.8.3.7 65 mm dia. nominal bore 18.8.3.8 80 mm dia. nominal bore 978 18.9 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer -in-charge. (The pipe length inserted in the fitting shall not be measured for payment) 18.9.1 Internal work - Exposed on wall 18.9.1.1 15.88 mm outer diapipe 18.9. 1.2 22.22 mm outer diapipe 18.9.1.3 28.58 mm outer diapipe 18.9.1.4 34.00 mm outer dia Pipe 18.9.1.5 42.70 mm outer dia Pipe 18.9.1.6 48.60 mm outer dia Pipe 18.9.2 Internal work - Concealed Pipe 18.9.2.1 15.88 mm outer dia .Pipes. 18.9.2.2 22.22 mm Outer diaPipes 979 18.12 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.12.1 With C.I. wheel of approved quality (screwed end) 18.12.1.1 25 mm nominal bore 18.12.1.2 32 mm nominal bore. 18.12.1.3 40 mm nominal bore 18.12.1.4 50 mm nominal bore 18.12.1.5 65 mm nominal bore 18.12.1.6 80 mm nominal bore 18.12.2 With brass lever handle of approved quality. 18.12.2.1 25 mm nominal bore 18.12.2.2 32 mm nominal bore. 18.12.2.3 40 mm nominal bore 18.12.2.4 50 mm nominal bore 980 18.13 Providing and fixing CPVC gate valve with knob of approved quality. 18.13.1 25 mm nominal bore 18.13.2 32 mm nominal bore. 18.13.3 40 mm nominal bore 18.13.4 50 mm nominal bore 981 18.14 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.14.1 15 mm nominal bore 18.14.2 20 mm nominal bore 18.14 3 25 mm nominal bore 982 18.15 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 18.15.1 25 mm nominal bore 18.15.1.1 Horizontal 18.15.1.2 Vertical 18.15.2 32 mm nominal bore 18.15.2.1 Horizontal 18.15.2.2 Vertical 18.15.3 40 mm nominal bore 18.15.3.1 Horizontal 18.15.3.2 Vertical 18.15.4 50 mm nominal bore 18.15.4.1 Horizontal 18.15.4.2 Vertical 18.15.5 65 mm nominal bore 18.15.5.1 Horizontal 18.15.5.2 Vertical 18.15.6 80 mm nominal bore 18.15.6.1 Horizontal 18.15.6.2 Vertical 983 18.16 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 18.16.1 15 mm nominal bore 18.16.2 20 mm nominal bore 18.16.3 25 mm nominal bore 984 18.17 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.17.1 30 cm length 18.17.1.1 15 mm nominal bore 18.17.1.2 20 mm nominal bore 18.17.2 45 cm length 18.17.2.1 15 mm nominal bore 18.17.2.2 20 mm nominal bore 985 18.18 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :- 18.18.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.18.2 With well burnt flyash bricks of 50 kg/sqm compressive strength. 986 18.19 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design 18.19.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.19.2 With flyash bricks of 50 kg/cm2 strength 987 18.20 Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.20.1 With common burnt clay bricks of 25 kg/cm2 compressive strength. 18.20.2 With flyash bricks of 50kg/cm2 strength. 988 18.21 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 18.21.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. 18.21.2 With flyash bricks of 50kg/sqm compressive strength. 989 18.22 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 18.22.1 15 mm diameter pipe. 18.22.2 20 mm diameter pipe. 18.22.3 25 mm diameter pipe. 18.22.4 32 mm diameter pipe. 18.22.5 40 mm diameter pipe. 18.22.6 50 mm diameter pipe. 990 18.23 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality : 18.23.1 15 mm diameter pipe. 18.23.2 20 mm diameter pipe. 18.23.3 25 mm diameter pipe 18.23.4 32 mm diameter pipe 18.23.5 40 mm diameter pipe 18.23.6 50 mm diameter pipe 991 18.24 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 18.24.1 15 mm diameter pipe 18.24.2 20 mm diameter pipe 18.24.3 25 mm diameter pipe 18.24.4 32 mm diameter pipe 18.24.5 40 mm diameter pipe 18.24.6 50 mm diameter pipe 18.24.7 65 mm diameter pipe 18.24.8 80 mm diameter pipe 992 18.25 Providing and filling sand all-round the G.I. pipes in external work. 18.25.1 15 mm diameter pipe 18.25.2 20 mm diameter pipe 18.25.3 25 mm diameter pipe 18.25.4 32 mm diameter pipe 18.25.5 40 mm diameter pipe 18.25.6 50 mm diameter pipe 18.25.7 65 mm diameter pipe 18.25.8 80 mm diameter pipe 993 18.26 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 18.26.1 15 mm nominal bore 18.26.2 20 mm nominal bore 18.26.3 25 mm nominal bore 18.26.4 32 mm nominal bore 18.26.5 40 mm nominal bore 18.26.6 50mm nominal bore 18.26.7 65mm nominal bore 18.26.8 80 mm nominal bore 994 18.27 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 18.27.1 15 mm nominal bore. 18.27.2 20 mm nominal bore. 18.27.3 25 mm nominal bore. 18.27.4 32 mm nominal bore. 18.27.5 40 mm nominal bore. 18.27.6 50 mm nominal bore. 18.27.7 65 mm nominal bore. 18.27.8 80 mm nominal bore. 995 18.28 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 996 18.29 Providing and fixing brass bib cock of approved quality 18.29.1 15 mm nominal bore 18.29.2 20 mm nominal bore 997 18.30 Providing and fixing brass stop cock of approved quality : 18.30.1 15 mm nominal bore 18.30.2 20 mm nominal bore 998 18.31 Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, and weighing not less then 400 kg, 15 mm nominal bore. 999 18.32 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm, 15 mm nominal bore. 1000 18.33 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm, 15 mm nominal bore 1001 18.34 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore. 1002 18.35 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore 1003 18.36 Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 15 mm nominal bore. 1004 18.37 Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. nd weighing not less than 650 gm,a15 mm nominal bore 125 mm long foam flow. 1005 18.38 Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS: specification.15 mm nominal bore. 1006 18.39 Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1007 18.40 Providing and fixing C.P. brass sink mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1008 18.41 Providing and fixing C.P. brass elbow operated bibcock of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1009 18.42 Providing and fixing C.P. brass elbow operated pillar cock of approved quality and make conforming to IS: specification. 15 mm nominal bore. 1010 18.43 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 18.43.1 100 mm diameter 18.43.2 150 mm diameter 18.43.3 200 mm diameter 1011 18.44 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore. 18.44.1 86 mm long weighing not less than 88 gm 18.44.2 122 mm long weighing not less than 99 gm 18.44.3 165mm long weighing not less than 110 gm 18.44.4 90mm long weighing not less than 93 gm 1012 18.45 Providing and fixing PTMT stop cock of approved quality and colour. 18.45.1 15 mm nominal bore, 86mm long. Weighing not less than 88 gms. 18.45.2 20mm nominal bore, 89mm long. Weighing not less than 88 gms. 18.45.3 Concealed stop cock, 15mm nominal bore, 108mm long. Weighing not less than 108 gms. 1013 18.46 Providing and fixing PTMT pillar cock of approved quality and colour. 18.46.1 15mm nominal bore, 107mm long. Weighing not less than 110 gms. 18.46.2 15mm nominal bore, 125mm long foam flow weighing not less than 120 gms. 1014 18.47 Providing and fixing PTMT, push cock of approved quality and colour. 18.47.1 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. 18.47.2 15 mm nominal bore, 80mm long weighing not less than 46 gms. 1015 18.48 Providing and fixing PTMT grating of approved quality and colour. 18.48.1 Circular type. 18.48.1.1 100 mm nominal dia. 18.48.1.2 125 mm nominal dia with 25 mm waste hole. 18.48.2 Rectangular type with openable circular lid. 18.48.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating. 1016 18.49 Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. 1017 18.50 Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40gms. 1018 18.51 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.51.1 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 18.51.2 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 18.51.3 25 mm nominal bore, 152mm long. Weighing not less than 440 gms. 18.51.4 40mm nominal bore, 206mm long. Weighing not less than 690 gms. 18.51.5 50mm nominal bore, 242mm long. Weighing not less than 1240 gms. 1019 18.52 Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour 15 mm nominal bore 18.52.1 30cm length. 18.52.2 45 cm length. 1020 18.53 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 18.53.1 15 mm nominal bore.Weighing not less than 32 gms. 18.53.2 20mm nominal bore.Weighing not less than 40gms. 18.53.3 25mm nominal bore.Weighing not less than 62 gms. 1021 18.54 Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 18.54.1 80 mm nominal bore 18.54.2 100 mm nominal bore 18.54.3 150 mm nominal bore 18.54.4 200 mm nominal bore 1022 18.55 Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 : 18.55.1 80 mm nominal bore 18.55.2 100 mm nominal bore 18.55.3 150 mm nominal bore 18.55.4 200 mm nominal bore 1023 18.56 Cutting holes upto 30x30 cm in walls including making good the same : With common burnt clay bricks of 25 kg /sqcmor flyash bricks of 50 kg/cm2compressive strength. 1024 18.57 Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. 1025 18.58 Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 1026 18.59 Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba. 1027 18.60 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 18.60.1 25 to 40 mm nominal bore 18.60.2 50 to 80 mm nominal bore 1028 18.61 Providing and fixing CP jet assembly to including connection etc complete. 1029 18.62 Providing and fixing ferro- cement water storage tank with cover, having minimum thickness of 10mm. The wall to be reinforced with two layers of double galvanized annealed square wooven wire mesh of 20 gauge wire spaced at 15mm for 300 litre capacity and 12mm for 450 to 2500 litres capacity finish with 3 layers of Cement mortar 1:2 duly modified with polymer based plastizers and hardening chemicals (Burogrout and Buroseal) The tank should conform to the specification prescribed by Structural Engineering Research Centre Roorkee/Gaziabad. The tanks to be painted with drinking water paint inside and aluminimum paint out side with provision of outlet, inlet, overflow and cleaning including hoisting and placing in position upto floor two level or 5 M. height. 1030 18.63 Add extra for additional floor lift beyond 5.0M.height. 1031 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.1.1 100 mm diameter 19.1.2 150 mm diameter 19.1.3 200 mm diameter 19.1.4 230 mm diameter 19.1.5 250 mm diameter 19.1.6 300 mm diameter 1032 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 19.2.1 100 mm diameter S.W. pipe 19.2.2 150 mm diameter S.W. pipe 19.2.3 200 mm diameter S.W. pipe 19.2.4 230 mm diameter S.W. pipe 19.2.5 250 mm diameter S.W. pipe 19.2.6 300 mm diameter S.W. pipe 1033 19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 19.3.1 100 mm diameter S.W. pipe 19.3.2 150 mm diameter S.W. pipe 19.3.3 200 mm diameter S.W. pipe 19.3.4 230 mm diameter S.W. pipe 19.3.5 250 mm diameter S.W. pipe 19.3.6 300 mm diameter S.W. pipe 1034 19.4 Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly. 19.4.1 110 mm diameter OD (min. wall thickness 3.2mm) 19.4.2 160 mm diameter OD (min. wall thickness 4.0mm) 19.4.3 200 mm diameter OD (min. wall thickness 4.9mm) 19.4.4 250 mm diameter OD (min. wall thickness 6.2mm) 19.4.5 300 mm diameter OD (min. wall thickness 7.7mm) 1035 19.5 Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 19.5.1 110 mm diameter PVC. pipe 19.5.2 160 mm diameter PVC. pipe 19.5.3 200 mm diameter PVC. pipe 19.5.4 250 mm diameter PVC. pipe 19.5.5 300 mm diameter PVC pipe 1036 19.6 Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) up to haunches of PVC. pipes including bed concrete as per standard design : 19.6.1 110 mm diameter PVC. pipe 19.6.2 160 mm diameter PVC. pipe 19.6.3 200 mm diameter PVC. pipe 19.6.4 250 mm diameter PVC. Pipe 19.6.5 300 mm diameter PVC pipe 1037 19.7 Providing and fixing square- mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 19.7.1 100x100 mm size P type 19.7.1.1 With well burnt bricks 19.7.1.2 With Sewer bricks conforming to IS : 4885 19.7.2 150 x 100 mm size P type. 19.7.2.1 With well burnt bricks 19.7.2.2 With sewer bricks conforming to IS : 4885 19.7.3 180x150 mm size P type 19.7.3.1 With well burnt bricks 19.7.3.2 With Sewer bricks conforming to IS : 4885 1038 19.8 Providing and laying non- pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : 19.8.1 100 mm dia. R.C.C. pipe 19.8.2 150 mm dia. R.C.C. pipe 19.8.3 250 mm dia. R.C.C. pipe 19.8.4 300 mm dia. R.C.C. pipe 19.8.5 450 mm dia. R.C.C. pipe 19.8.6 500 mm dia. R.C.C. pipe 19.8.7 600 mm dia. R.C.C. pipe 1039 19.9 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 sand ) R.C.C. top slab with Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design 19.9.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.9.1.1 With well burnt bricks 19.9.1.2 With Sewer bricks conforming to IS : 4885 19.9.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 19.9.2.1 With well burnt bricks 19.9.2.2 With Sewer bricks conforming to IS : 4885 19.9.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : 19.9.3.1 With well burnt bricks 19.9.3.2 With Sewer bricks conforming to IS : 4885 1040 19.10 Extra for depth for manholes 19.10.1 Size 90x80 cm 19.10.1.1 With well burnt bricks 19.10.1.2 With Sewer bricks conforming to IS : 4885 19.10.2 Size 120x90 cm 19.10.2.1 With well burnt bricks 19.10.2.2 With Sewer bricks conforming to IS : 4885 1041 19.11 Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : 19.11.1 With well burnt bricks 19.11.2 With Sewer bricks conforming to IS : 4885 1042 19.12 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m 19.12.1 With well burnt bricks 19.12.2 With Sewer bricks conforming IS : 4885 1043 19.13 Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) 19.13.1 With well burnt bricks 19.13.2 With Sewer bricks conforming IS : 4885 1044 19.14 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : 19.14.1 With well burnt bricks 19.14.2 With Sewer bricks conforming IS : 4885 1045 19.15 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design : 19.15.1 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 19.15.1.1 With well burnt bricks 19.15.1.2 With Sewer bricks conforming IS : 4885 1046 19.16 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : 19.16.1 With well burnt bricks 19.16.2 With Sewer bricks conforming IS : 4885 1047 19.17 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : 19.17.1 With 20x20 mm square bar 19.17.2 With 20 mm diameter round bar 1048 19.18 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. 1049 19.19 Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size): 19.19.1 With 20x20 mm square bar 19.19.2 With 20 mm diameter round bar 1050 19.20 Supplying and fixing C.I. cover without frame for manholes : 19.20.1 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. 19.20.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 19.20.3 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg. 1051 19.21 Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality 19.21.1 Light duty D- 2.5 19.21.1.1 Rectangular shape 600x450mm internal dimensions 19.21.1.2 Square shape 450mm internal dimensions 19.21.1.3 Circular shape 450mm internal diameter 19.21.2 Medium duty - 10 19.21.2.1 Square shape 450mm internal dimension 19.21.2.2 Circular shape 500mm internal diameter 19.21.3 Heavy duty D - 20 19.21.3.1 Circular shape 560 mm internal diameter 19.21.4 Extra Heavy Duty - 35 19.21.4.1 Circular shape 560 mm internal dia. 1052 19.22 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. 1053 19.23 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 19.23.1 For pipes 100 to 230 mm diameter 19.23.2 For pipes 250 to 300 mm diameter 19.23.3 For pipes 350 to 450 mm diameter 1054 19.24 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) with cement mortar 1:1 (1 cement : 1 sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications : 19.24.1 100 mm dia. sand cast iron drop connection 19.24.2 150 mm dia. sand cast iron drop connection 1055 19.25 Extra for depths beyond 60 cm of sand cast iron drop connection complete : 19.25.1 For 100 mm dia. sand cast iron drop connection 19.25.2 For 150 mm dia. sand cast iron drop connection 1056 19.26 Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Brick work for Raising depth of manhole to be paid separately) : 19.26.1 Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5 19.26.2 Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10 19.26.3 Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 19.26.4 Circular manhole 140 cm dia with circular cover 600 mm dia of grade Extra heavy duty HD -35 1057 19.27 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : 19.27.1 With well burnt bricks 19.27.2 With fly ash bricks 100 key/cm2 strangth 1058 19.28 Constructing brick masonry road gully chamber 45x45x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) with precast R.C.C. vertical grating complete as per standard design : 19.28.1 With well burnt bricks 19.28.2 With fly ash bricks 100 kg/cm2 strength 1059 19.29 Constructing brick masonry road gully chamber 110x50x77.5cm with bricks in cement mortar 1:4 (1 cement : 4 sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : 19.29.1 With well burnt bricks 19.29.2 With fly ash bricks 100 kg/cm2 strength 1060 19.30 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.30.1 With well burnt bricks 1061 19.31 Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. 1062 19.32 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 sand) including testing of joints etc. complete : 19.32.1 100 mm dia 19.32.2 150 mm dia 1063 19.33 Providing, laying and jointing half round glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.33.1 100 mm dia 19.33.2 150 mm dia 19.33.3 200 mm dia 19.33.4 230 mm dia 19.33.5 250 mm dia 19.33.6 300 mm dia 1064 19.34 Providing and laying half round RCC pipes class (light duty) with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 sand) including testing of joints etc. complete : Excavation to be paid seperataly 19.34.1 100 mm dia. Half round R.C.C. pipe 19.34.2 150 mm dia. Half round R.C.C. pipe 19.34.3 250 mm dia. Half round R.C.C. pipe 19.34.4 300 mm dia. Half round R.C.C. pipe 1065 19.35.1 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.1.1 & 19.9.1.2 19.35.2 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.2.1 & 19.9.2.2 19.35.3 Deduct for not provide C.I. manhole cover with frame for item No. 19.9.3.1 & 19.9.3.2 1066 19.36 Providing & Fixing of Precast RCC drain cover of size 600x 450 x70mm (thickness) with 4 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1067 19.37 Providing & Fixing of Precast RCC drain cover of size 750x600 x70mm (thickness) with 6 holes, manufactured by using M-30 grade of concrete reinforced with 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1068 19.38 Providing & Fixing of Precast RCC drain cover of size 900x450 x90mm (thickness) with 8 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @ top face will have broom finish etc complete. 1069 19.39 Providing & Fixing of Precast RCC drain cover of size 1150x400 x100mm (thickness) with 10 holes, manufactured by using M-30 grade of concrete reinforced with two layers of 8mm dia Tor Steel @100mm c/c both ways, manufactured by vibro compaction process using joint less FRP moulds, so at to achieve shuttering finish on five faces @top face will have broom finish etc complete. 1070 19.40 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 900X450mm rectangular having weight of (complete unit) (weight of frame 11.7 kg + weight of cover 43.76kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1071 19.41 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 450X600mm rectangular having weight of (complete unit) (weight of frame 1.84kg + weight of cover 14.2kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1072 19.42 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 300X300mm (square) having weight of (complete unit) (weight of frame 1.12kg + weight of cover 4.1kg ± 10%) (LD/2.5MT) having load bearing capacity (Point load 2.5MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement. 1073 19.43 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 600mm (round) having weight of (complete unit) (weight of frame 13.6kg + weight of cover 43.1kg + - 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. having lifting arrangement should have an insertion of 5 mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement 1074 19.44 Supplying and fixing of FRP/GRP composite manhole cover with frame of clear opening size 500mm (round) having weight of (complete unit) (weight of frame 11.2kg + weight of cover 41.78kg ± 10%) (HD/25MT) having load bearing capacity (Point load 25MT) as per testing code BSEN 124:1994. Having lifting arrangement should have an insertion of 5mm double sealed closed key hole and high strength plastic alloy/stainless steel socketed arrangement 1075 19.45 Deduct for not providing and installing FRP/GRP manhole cover size 19.45.1 900mmx450mm (weight of cover 43.76kg ± 10%) 19.45.2 450mmx600mm (weight of cover 14.2kg ± 10%) 19.45.3 300mmx300mm (weight of cover 4.1kg ± 10%) 19.45.4 600mm (weight of cover 41.78kg ± 10%) 19.45.5 500mm (weight of cover 43.1kg ± 10%) 1076 19.46 Providind, laying and jointing HDPE Double Wall corrugated (DWC) pipes (excavation to be paid seperately) 19.46.1 100 mm dia to 110 mm dia 19.46.2 150 mm dia to 160 mm dia 19.46.3 200 mm dia 19.46.4 250 mm dia 19.46.5 300 mm dia 1077 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion. 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 21.1.2 For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) 21.1.3 Deduct for not providing EDPM rubber/neoprene gasket all around. 1078 21.2 Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. 21.2.2 Pre-laminated particle board with decorative lamination on both sides. 1079 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 21.3.2 With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 1080 21.4 Add extra for providing and fixing froasted glass instead of float glass 21.4.1 With glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 21.4.2 With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 21.4.3 With glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). 1081 21.5 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge : 21.5.1 With stainless steel cover plate - minimum 1.25 mm thickness 21.5.2 With brass cover plate - minimum 1.25 mm thickness. 1082 21.6 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). 1083 21.7 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. 1084 21.8 Providing and fixing machine moulded aluminium covering of approved pattern and design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick and 15 mm dia, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-Charge : 21.8.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 21.8.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) 1085 21.9 Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width 1086 21.10 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections. For fixed portion & for shutters of doors, windows and ventilators 1087 21.11 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete. 1088 21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick and length as required with SS screws etc complete as per direction of Engineer-in-Charge. 21.12.1 Anodized (AC 15 ) aluminium tubular handle bar 21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar. 21.12.3 Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar. 1089 21.13 Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 1090 21.14 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). 1091 21.15 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. 21.15.1 Anodized (AC15) aluminium 21.15.2 Powder coated minimum thickness 50 micron aluminium. 21.15.3 Polyester powder coated minimum thickness 50 micron aluminium. 1092 21.16 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-Charge 21.16.1 Anodized (AC15 ) aluminium 21.16.2 Powder coated minimum thickness 50 micron aluminium 21.16.3 Polyester powder coated minimum thickness 50 micron aluminium. 1093 21.17 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). 1094 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door handle, lock and stopper etc.to be paid separately). 1095 21.19 Providing and fixing 50 micron thick reflective one way type heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. 1096 21.20 Providing and fixing 50 micron thick Frosted heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in-charge of approved brand and make. 1097 21.21 Providing and fixing 25 micron thick Non reflective heat /light control film to window/door glazing with complete accessories as per direction of Engineer-in- charge of approved brand and make. 1098 21.22 Providing and fixing 12 mm thick toughened glass including all connectors and fixing accessories all complete for partitions, cubicals etc. As per direction of Engineer-in-Charge. 1099 21.24 Extra for froasted glass (with eching film) in item No. 21.22 1100 22.1 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge consisting of: (i)     Ist layer of 22mm to 25mm thick approved and specified rough stone slab over a 25mm thick base of cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound conforming to IS: 2645 in the recommended proportion over the levelling course ( levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii)         2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportions. (iii)        Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. (with 5 years service guarantee) Using rough Kota stone. 1101 22.2 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge (with 5 years service guarantee) Using rough Kota stone. 1102 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : a)   Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b)   IInd course of 20mm cement plaster 1:3 (1 cement: 3 sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c)    IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. d)      IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee) 1103 22.4 Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete (with 5 years service guarantee) 22.4.1 Serrated with central bulb (225mm wide, 8- 11mm thick). 22.4.2 Dumb bell with central bulb (180mm wide, 8mm thick). 22.4.3 Kickers (320mm wide, 5mm thick). 1104 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a)  First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)  Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 1105 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a)     After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)    Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c)   Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. 1106 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a)  Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b)  Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in- Charge: (with 5 years service guarantee) With average thickness of 120mm and minimum thickness at khurra as 65 mm. 1107 22.8 Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea-sized gravel spread at 6 cubic decimeter per square metre including preparation of surface but excluding grading complete with : (with five years service gurantee). Bitumen felt (hessian base) type 3 grade I conforming to IS: 1322. 1108 22.9 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee). 1109 22.10 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I (fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6cu.dm per sqm including preparation of surface, excluding grading, complete. (With five years service gurantee). 1110 22.11 Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blow or/ and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading, complete. (With five years service gurantee) 1111 22.12 Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel at 6 cudm per sqm. 1112 22.13 Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. 1113 22.14 Grading roof for receiving water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) 22.14.2 Cement mortar 1:3 (1 cement : 3 sand) 22.14.3 Cement mortar 1:4 (1cement : 4 sand) 1114 22.15 Providing and laying insitu six course water proofing treatment with APP (Atactic poly- propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. (with 5 years service guarantee) 1115 22.16 Providing and laying in situ four course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with 5 years service guarantee). 1116 22.17 Providing and laying in situ six course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40Kg per sqm, conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film. (with five years service gurantee). 1117 22.18 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2mm thick water proofing membrane for corrugated roof sheets, black finished reinforced with glass fibre matt consisting in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane. (With five years service gurantee). 1118 22.19 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer of the membrane shall be as under:Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : (with 5 years service guarantee) 1119 22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sqm. by the same membrane manufacture of density at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: (with 5 years service guarantee). 1120 22.21 Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. [for item No. 22.18 to 22.20] 1121 22.22 Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre glass mesh and Sealer coat at leakage/ seepage area consisting of (i)   Surface preparation roughening of surface, opening cracks in ‘V’ groove in size of 5mmX10mm (WXD), filling of cracks with putty with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii)     Providing and applying 1st coat of fibre glass mesh (minimum thicknes 70-80 micron) and two component flexible waterproof and protective modified mortar, dry powder 80% chemical 20% acrylic resin having 30% solid contents) with mix proportion of part 1 and 2 with proper mixing with laying of fiber glass mesh (of weaving size of 10X10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to air cure for minimum 2 Hrs. After two hours of 1st coat applying 2nd coat (minimum thickness 100 micron) of fibre glass mesh of with mix proporation of part 1 and 2 with proper mixing. Allow the coating to air cure for minimum 2 hrs. Consumption of two component should be acrylic resin @17.90 kg for 10 sqm area or as per manufacture instructions. (After two coats of diamond shield, surface is to be cured properly minimum for 4 hrs. before application of third coat). (iii) Providing and applying 1st coat of sealer coat 50-60 micron (single component Hight build elastomeric, fixable pure acrylic waterproofing membrane having solid content of 65%) and allow it to air cure for 4Hrs. minimum. After two hours minimum of 1st coat applying 2nd and finals coat 120-140 micron of sealer coat and allow it to air cure for 4 Hrs mimimum. Consumption of Sealer coat should be @ 5.40 kg per 10 sqm area. (iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) 1122 22.23 Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i)Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/ Nylon brush/ Removing all dust particles and washing with adequate water to clean completely, opening of cracks in V groove in size of 5mm x 10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent. (iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/ Roller/ Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs. (iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI - 144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/seepage by flooding with water for 48 hrs (vii) Application of membrane coating shall be got done by authorized applicator of manufacturer. (viii) 5 years of service guarantee to be provided.All above operations to be done in order as per direction on Engineer-in-Charge. 1123 22.24 Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibers. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and as per the direction of Engineer-in-Charge. 1124 22.25 Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and as per direction of Engineer-in-Charge. 1125 22.26 Providing and applying UV Stable polyurethane liquid water proofing membrane having Sun Reflectivity Index (SRI) of 106 on top of concrete roof / Retainning wall / Old layer of bituminous surfaces / Polyurethane foam and metal surfaces in three or more coats @20kg/ 10 sqm consisting of a coat of two component epoxy primer in ratio of 1:3(one part of resin and 3 parts of hardner) at a consumption of 2kg/10sqm. the vital physical and chemical parameters shall be as under : Min Elongation at break of 600% as per ASTM D412 and tensile strength of 3.0 N/mm2 as per ASTM D412. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as recommended by the manufacturer’s specification and direction of Engineer-in-Charge. 1126 22.27 Supplying & installing waterproofing treatment by using 1.2 mm thick HDPE membrane before casting of the base RCC slab. The pre-applied membrane gets bonded to the underneath of the poured concrete used as base slab. The membrane shall consist of a thick HDPE film, a highly aggressive pressure sensitive adhesive and weather resisting coating which bonds integrally to poured concrete of base slab. The membrane shall conforms to basement waterproofing protection to grades 2, 3 & 4 as defined in BS 8102:2009. The waterproofing membrane shall have following minimum properties: a)    Resist hydrostatic pressure of up to 70 m head of water as per ASTM D5385; b)      Puncture Resistance of 950 N (as per ASTM E154) c)      Elongation of >400 % (as per ASTM D412) d)    Peel Strength of concrete: >1500 N/m (as per ASTM D903) e)      Tensile strength of 28.2 MPA (as per ASTM D412). 1127 22.28 Providing and applying 2.0 mm thick twin colour flexible PVC waterproofing membrane. Flexibility under low temperatures as per EN 495-5 should be < - 20degC. On all horizontal surfaces Geotextile 300 Gsm to be laid over PCC, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane provide 300 Gsm Geotextile Then protection screed of suitable thickness. On all vertical surfaces Geotextile 300 Gsm to be laid along with Vertical wall, than laying PVC membrane over Geotextile and to be sealed with hot air welding method at all joints and over PVC membrane providing protection layer of Drain Board HDPE Dimple sheet before back filling of soil. 1128 22.29 Providing and applying waterproofing & Heat reflecting roof coating with 100% acrylic elastomeric polymers. Contains 30% Volume solid, tensile strength 8 kg/cm², crack bridging, VOC 30 ± 5 gm/ltr upto 2 mm. then applying two coats with forced coverage of 20 sqft/ltr/two coats. The operation shall be carried out after scrapping & propely clening the surface to remove loose particles with wire brush/Jet washer. Apply 1 coat @1 ltr/10 sqm & 3 undiluted coats @ 8 ltr/10 sqm with 4 hrs interval of each coat.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. 1129 22.30 Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer-in-Charge 1130 22.31 Providing & applying single pack component, solvent-free, cold applied, Polyurethane modified, elastomeric liquid applied waterproofing membrane- PU coat with excellent UV resistant capacity, The material shall meet the requirement as specified in ASTM D2370-98 of elongation at break of film>350% with geotextile fleece =50% approx.The work shall be carried out as recommended by the manufacturer’s specification & the direction of the Engineer- in-Charge. The product performance shall carry guaranteed for 5 year against any leakage. 22.31.1 For Horizontal surface (with Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 22.31.2 For Horizontal surface (without Geotextile fleece) two coats without dilution & 1 Self priming coat- 50% dilution with water @ 10 kg/m2 1131 22.32 Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and Compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-Charge. The product performance shall carry guarantee for 10 years against any leakage. 1132 22.33 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on positive side. The crystalline slurry shall be capable of self- healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 22.33.1 For vertical surface two coats @ 0.70 kg per sqm 22.33.2 For horizontal surface one coat @1.10 kg per sqm. 1133 22.34 Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product Performance shall carry guarantee for 10 years against any leakage. 1134 22.35 Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge.The product performance shall carry guarantee for 10 years against any leakage. 22.35.1 For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat. 22.35.2 For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @ 0.070 kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline mortar @ 0.040 kg per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040 kg to fill the hole) 1135 22.36 Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. 1136 22.37 Providing and applying waterproofing treatment in bathroom or tiled balcony area without breaking or removing tiles, by using waterproofing sheets as per manufacturers data sheet instructions. Permitting use of bathroom/balcony after 24 hours of application of treatement, Complete with materials and labour and gurantee of leakage for a period of 5 year. 1137 23.11 Providing and fixing 2 mm thick homogeneous conductive PVC (Poly Vinyl Flooring) EN (European Standard), total weight is 3250 g/m2, approx. PUR (Polyurethane Reinforced ), abrasion group P: ≤2.00 mm, residual indentation approx. 0.03 mm, anti-bacterial and fungal resistance, castor wheel test qualified, dimensional Phthalate free, directional in design.The floor finish should be termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto 100mm.Recommended to use in area like ICU , Post operative, Recovery rooms, OPD, Patient rooms, Corridors ,passages etc. 1138 23.12 Providing and fixing permanently static dissipative pressed homogeneous conductive PVC ( Poly Vinyl Flooring) EN (European Standard), anti static, wear layer thickness is 2mm (EN429), vinyl flooring having carbon backing with total weight 3000 g/m2 ESD approved, restorable properties, available in rolls. 100% recyclable (eco - freindly). Low VOC emission after 28days of installation (lower than ≤100μg/m3), Phthalate free non-directional in Design. Recommended to use in area like Operation theater, ICU, Server room, etc. 1139 23.13 Providing and fixing 0.92mm thick hetrogeneous compact PVC (Poly Vinyl Wall Covering) for Interior wall area, with wear layer thickness 0.12mm of PVC, EN(European Standard) total weight is 1500 g/m2, approx PUR (Polyurethane Reinforced), good resistance to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28 days of installation (lower than ≤10μg/m3), phthalate free, directional in design, The wall finish should termite free at the room perimeter. Recommended to use in area like OT,ICU, Corridors, Patient Room etc. 1140 23.14 Providing and fixing 1.3mm thick homogeneous PVC (Poly Vinyl Wall Covering) for interior area with wear layer thickness 1.3 mm of PVC, EN (European Standard) total weight is 2100 g/m2,approx. PUR (Polyurethane Reinforced), good resistant to chemical and fire, doesn’t favour in growth of fungi and bacterial, 100% recyclable (eco-freindly), low VOC emissions after 28days of installation (lower than ≤10μg/m3), phthalate free, directional in design.The wall finish should termite free at the room. Recommended to use in area like OT.ICU,Corridors, Passages , Patient Room Etc 1141 23.15 Supply and installation of 2mm thick homogeneous vinyl flooring, Highest abrasion wear rating Group T (EN660), binder content exceeds 55% of the flooring composition, no waste technology, consisting of PVC resin, plasticizers and stabilizers, type I. flooring ( (EN ISO 23997) max 0.4%, Abrasion group (MSZ EN 660-1) T, Fire resistance EN 13501-1 BF1-s1, Slip resistance DIN 51130 R9, EN 13893 DS, electrical resistance EN 1815 <2 kv, Chemical resistance EN ISO 26987, Castor chair resistance EN ISO 4918, Hygenie Bacterial resistant, Seaming method - hot welding, finishing complete . Recommended to use in area like Operation theater, ICU, Server room, etc. 1142 24.8 Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) conforming to IS 14862:2000 of category III type B as per standard sizes fixed with self- drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. 1143 24.9 Providing and fixing thermal insulation with Resin Bonded glass wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by crisscrossing GI wire etc. complete as per directions of Engineer-in-Charge. 24.9.1 Providing and fixing insulation with resin bonded Glass wool 24.9.2 Providing and fixing insulation with resin bonded Rock wool 1144 24.11 Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsmlength upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1145 24.12 Providing and fixing precoatedgalvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete : 24.12.1 Ridges plain (500 - 600mm). 24.12.2 Flashings/ Aprons.( Upto 600 mm) 24.12.3 North light curves. 24.12.4 Barge board (Upto 300 mm). 24.12.5 Crimp curve 24.12.6 Gutter. (600 mm over all girth). 1146 25.1 Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.1.1 White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440x575x250 mm With integral foot rests. (Premium Range) 25.1.2 White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410x515x255 mm with integral foot rests. (Premium Range) 1147 25.2 Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.2.1 Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.2.2 Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360x545x395 mm with solid poly propelyne made soft closing seat cover (Premium Range) 1148 25.3 Providing and fixing white vitreous china European Wall hung Anti germ Fluoro-Polymer Coated water closet of approved shape with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propylene) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. 25.3.1 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380x520x375 mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.3.2 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390x570x365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) 25.3.3 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500x360 mm with solid poly propelyne made, soft closing seat cover (Premium Range) 25.3.4 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360x500x330 mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) 1149 25.4 Providing and fixing white vitreous china Anti germ fluoro-polymer coated couple water closet flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete . 25.4.1 Anti germ Fluoro-Polymer Coated couple water closet Size 420x710x810 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.2 Anti germ Fluoro-Polymer Coated couple water closet Size 380x610x805 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.3 Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) 25.4.4 Anti germ Fluoro-Polymer Coated couple water closet Size 375 x 650 x 800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) 1150 25.5 Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.5.1 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370x695x795 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.2 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 395x710x730 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.3 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 385 x 720 x 710mm with solid poly propelyne made soft closing seat cover.(Premium Range) 25.5.4 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685 mm with solid poly propelyne made soft closing seat cover.(Premium Range) 1151 25.6 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet along with dual flushing cistern flushing capacity 3 & 6 litre approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.6.1 Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 760X360X635mm with solid poly propelyne made soft closing seat cover (Premium Range) 25.6.2 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 380x650x730 mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) 1152 25.7 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. 25.7.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 1153 25.8 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. 25.8.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 570x820x195 mm with wall mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 25.8.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x820x195 mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system (decol technology). (Premium Range) 1154 25.9 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted single lever concealed basin mixture, (cartridge size 32 mm) 32 mm C. P. brass waste coupling length 130mm and 32 mm C. P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) 25.9.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) 25.9.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185 mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) 1155 25.10 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. 25.10.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185 mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) 25.10.2 White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140 mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) 1156 25.11 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated urinal (Inbuilt spreaders, bottle trap and ceramic waste coupling) with 15mm brass pressmatic auto closing concealed urinal flush valve with wall flange (decol technology, 400000 operation warranted) i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . 25.11.1 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) 25.11.2 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 475x315x715 mm. (Premium Range) 25.11.3 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 385x325x635 mm. (Premium Range) 1157 25.12 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . 25.12.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve for urinal complete set with installation box with control cock. (Premium Range) 25.12.2 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) 1158 25.13 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . 25.13.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480x300x740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) 1159 25.14 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling)with sensor complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required. 25.14.1 White Vetrious China made Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) Size 340x325x650 mm with sensor (Premium Range) 25.14.2 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 7475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor for flushing. (Premium Range) 1160 25.15 Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with chrome plating. (Premium Range) 1161 25.16 Providing & Fixing 8mm thick froasted Urinal glass partition size height 900 mm top width 450mm and bottom width 300mm brass made bracket with chrome plating. (Premium Range) 1162 25.17 Providing & Fixing plain bath tub of size 180x80x47cm body made of PMMA (Poly Methyl metha acrylate) with 20mm wooden reinforcement. (Premium Range) 1163 25.18 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) 1164 25.19 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) 1165 25.20 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating. 10 micron and chrome plating 0.3 micron, quarter turn) Angular stop cock. (Premium Range) 1166 25.21 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Concealed stop cock. (Premium Range) 1167 25.22 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) 1168 25.23 Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 3-in1 Wall Mixer .(Premium Range Sanitary Ware) 1169 25.24 Providing and fixing in position best Indian C. P. brass made quarter turn (Ceramic disc Size 25mm) Flush Cock for Indian W. C. (Orissa Pan). (Premium Range) 1170 25.25 Providing and fixing in position best Indian single Lever Auto Mixing Wall Mixer (Cartridge Size 40mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) 1171 25.26 Providing and fixing in position best Indian single Lever Auto mixing Basin Mixer (Cartridge Size 32mm, nickel plating 0.10 micron and chrome plating 0.3 micron) For Wash Basin area use only. (Premium Range) 1172 25.27 Providing and fixing in position best Indian single Lever Auto Mixing Diverter (Cartridge Size 47mm, nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only. (Premium Range) 1173 25.28 Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1174 25.29 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 300mm (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1175 25.30 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 450mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) 1176 25.31 Providing and fixing in position best Indian C. P. brass made Shower Arm Length 600mm (nickel plating 0.10 micron and chrome plating 0.3 micron) .(Premium Range Sanitary Ware) 1177 25.32 Providing and fixing in position best Indian shower rose 300x300mm square body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range Sanitary Ware) 1178 25.33 Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) 1179 25.34 Providing and fixing in position best Indian shower rose 200mm dia body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles .(Premium Range) 1180 25.35 Providing and fixing in position best Indian shower rose 240mm body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) 1181 25.36 Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range) 1182 25.37 Providing and fixing in position best Indian Health Faucet with 8mm dia 1.20 meter long Flexible Tube and wall bracket with N. R. V. (non-return wall).(Premium Range Sanitary Ware) 1183 25.38 Providing and fixing in position best Indian Auto Closing Pillar Cockdody with 65 mm extension (with DECOL cartridge) for wash basin use. (Premium Range) 1184 25.39 Providing and fixing in position best Indian Auto Closing Bib Cock with built in control cock wihh wall flange (with DECOL cartridge) for common area use. (Premium Range) 1185 25.40 Providing and fixing in position best Indian Auto Closing Urinal valve open type with built in control cock wihh wall flange (with DECOL cartridge) for urinal use only. (Premium Range) 1186 25.41 Providing and fixing in position best Indian Auto Closing Urinal valve concealed type (with DECOL cartridge) for urinal use only. (Premium Range) 1187 25.42 Providing and fixing in position best Indian Auto Closing wall mounted Pillar Cock (with DECOL cartridge) for wash basin use only. (Premium Range) 1188 25.43 Providing and fixing in position best Indian Auto Closing 40mm Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) 1189 25.44 Providing and fixing in position best Indian Auto Closing 40mm Dual Flow (3.0/6.0 liter) Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/ cartridge). (Premium Range) 1190 25.45 Providing and fixing in position best Indian Auto Closing 32mm, Flush valve (for W. C. European and Wall Hung Type) concealed type (with DECOL technology/cartridge). (Premium Range) 1191 25.46 Providing and fixing in position best Indian Sensotronic Sensor Faucet for Wash Basin use only. (Premium Range) 1192 25.47 Providing and fixing in position best Indian Sensotronic Sensor battery & electrical oprated type (9V transformer) Faucet For Urinal use only. (Premium Range) 1193 25.48 Providing and fixing in position best Indian Sensotronic Sensor concealed type Faucet For Wall Mounted Water Closet use only. (Premium Range) 1194 25.49 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 300 mm long. (Premium Range) 1195 25.50 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) 1196 25.51 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Swivel Towel holder Twin Type. (Premium Range) 1197 25.52 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Ring Square. (Premium Range) 1198 25.53 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) 1199 25.54 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dispenser with Metallic Bottle. (Premium Range) 1200 25.55 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Tumbler Holder. (Premium Range) 1201 25.56 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) 1202 25.57 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Toilet Roll Holder. (Premium Range) 1203 25.58 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) 1204 25.59 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Double coat Hook. (Premium Range) 1205 25.60 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) 1206 25.61 Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) 1207 25.62 Providing & Fixing 8mm thick froasted Urinal glass partition size 900x450mm brass made bracket with. (Premium Range) 1208 25.63 Wall Hung Basin: Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.63.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) 25.63.2 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) 25.63.3 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) 25.63.4 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 500x440x385 mm. (Premium Range) 25.63.5 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 635x485x305 mm. (Premium Range) 1209 25.64 Wall Hung Basin ; Providing and fixing white vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, 15 mm C. P. brass pillar cock, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.64.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 635x430x190 mm. (Premium Range) 1210 25.65 Providing and fixing in position best Indian, quarter turn table mounted sink mixer (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1211 25.66 Providing and fixing in position best Indian, quarter turn wall mounted sink cock (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) 1212 25.67 Shower Glass Cubical: Providing and fixing toughen glass shower enclosure conformed Is 2553 (part 1. 1990) or IS 14900. 2000 or IS 2835.1987 or IS 14450. 2000 with C. P. brass 5 Year warranted hardware, 19mm dia SS 304 grade stabilizer, all plastic Parts of food grade plastic and all glass shall be toughened at 700 degree Celsius and Anti lime scale treated including painting of fittings, cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete. (Premium Range) 25.67.1 Providing and fixing corner entry 6 mm toughen glass made to measurement shower enclosure size 1200mm x1200mm x 1950mm with aluminum profile on sides, shower enclosure with door sliding on both sides. (Premium Range) 25.67.2 Providing and fixing 8 mm toughen glass wall to wall sliding shower enclosure with one fixed glass and one silding door with a Towel Rod Fixed on the fixed glass size Hight:2000 mm Width: 1500mm to 2000mm. (Premium Range) 25.67.3 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed withwall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) 1213 25.68 Providing and fixing 8 mm toughen glass made to measurement door Openable (inside/outside) shower enclosure two parts Wall to Wall enclosure with one fixed glass and openable door fixed with wall with square hardware & profile glass size Hight: 2000mm Width 800mm to 1200mm. (Premium Range) 1214 25.69 providing and fixing white tempered glass showerpenal with special Surface body materials tempered glass with glass special surface PVC back. ABS Movable tops Shower, 4 moveable ABS body massage jets, Hand shower with fiexible hose,Brass Sout, shelf, Thermostatic mixer with diverter, 40 cm stainless steel braided hose, Minimum water pressure required 2 bar. 1215 25.70 Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1216 25.71 Providing and fixing in position best Indian, exposed wall mounted bath and shower mixer with thermostatic control cartridge with button attachment on spout with connecting legs and wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) .(Premium Range) 1217 25.72 Providing and fixing in position best indian, eko exposed shower mixer (wall mounted) with thermostatic control cartridge, 115mm long bend pipe on lower side, connecting legs and wall flange (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) 1218 25.73 Providing and fixing in position best Indian, exposed shower mixer (tub mounted) with thermostatic control cartridge, with button attachment on spout with straight legs (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1219 25.74 Providing and fixing in position best Indian, 4 - way diverter consisting of concealed body and wall flange for multiple shower working with one shut-off position and 3 outlets for body shower, head shower and spout ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) 1220 25.75 Providing and fixing in position best Indian, thermostatic concealed high flow control valve with wall flange ( standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function) . (Premium Range) 1221 25.76 Medical Faucets : Providing and fixing in position best indian, single lever surgical purpose elbow action basin mounted mixer with extended Operating lever without popup waste system with 450mm long braided hoses (cartage size32mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) 1222 25.77 Providing and fixing in position best Indian, surgical purpose elbow action pillar cock with extended Operating lever.( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) (Premium Range) 1223 25.78 Providing and fixing in position best Indian, surgical purpose elbow action wall mounted pillar cock with extended Operating lever and wall flange. (bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn). (Premium Range) 1224 25.79 Providing and fixing in position best Indian, 692mm long, satin finish C. P. Brass grab bar made of 304 grade ss i/c all nuts and screw (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1225 25.80 Providing and fixing in position best Indian, satin finish, C. P. Brass grab bar with left/right 90 degree angle, made of 304 grade ss i/c all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1226 25.81 Providing and fixing in position best Indian, C. P. Brass grab bar vertical swing, 304 grade ss made all nuts and screws. (0.3 micron chrome and 10 micron nickel plated). (Premium Range) 1227 25.82 Providing and fixing 8mm thick frosted safety glass Urinal partition size 900mm height and 450mm width, fixed with C P brass bracket of appropriate size i/c cutting and making good the wall and floors wherever required with all fittings and fixtures etc. complete.(Premium Range) 1228 27.4 Providing and fixing Stainless steel plate 304 grade of 1.50mm thick, including writing with Embossing of letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. 1229 27.5 Providing and fixing of name plate for offices name of Stainless steel plate 304 grade of 1.50mm thick, including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer- in-Charge. 1230 27.6 Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with 1.25m Chromium plated Steel Pipe 15mm dia, compete as per direction of Engineer-in-Charge. 1231 27.7 Providing and fixing Aluminum composite panels Silver colour with matte finish, 3mm thick, (0.25mm 2.5mm and 0.25mm) sheet for name plate including writing with computerized vinayle sheet letters of required size including fixing at required placed with studs, screws and rawl plugs etc. compete as per direction of Engineer-in-Charge. 1232 27.8 Providing and fixing stainless steel English (Capital) and Hindi letters in standard pattern bellow type made with 1.20 mm thick stainless steel (ASI Grade- 304 ) Depth of letter shall not be less than 30mm and rate includes welding/soldering of joints polishing, buffing and fixing on the wall, plate and beam surface at any height with necessary nut and bolts/fastener wherever is required complete as per direction of Engineer-in-Charge. 1233 27.10 Providing and fixing of prestressed vertically casted concrete panels (both surfaces should be smooth and having grooves on both faces) of M-40 grade of concrete of size 2100x300x50 mm having minimum 4 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed horizontally in full length of panel with prestressed precast concrete column of M-40 grade of size 3000x150x150 mm having minimum 7 nos of high tensile steel wire as per IS 6006:2014 of dia 3 mm placed vertically in full length to erect precast boundary wall panels to height 2100 mm from GL including excavation of pit of size 750x750x900 mm in all kind of soil except rock for erection of columns and grouting the pit with M-20 grade of concrete. Manufacturing, transportation and installation at site all complete as per the direction of Engineer-in-Charge. 1234 27.11 Extra for every additional height of 0.3 m up to height of wall 3 m 1235 28.35 Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. 1236 28.36 Providing and fixing of stone planter (bench) made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1200mm, width 500mm, legs height 500 mm. 1237 28.37 Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. 1238 28.38 Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant including centering and shuttering complete. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, with wire brush etc. complete as per specifications and directions of Engineer- in-Charge.Note: Cement content considered in this item is @ 330 kg/cum. 1239 29.1 Preparation of site plan and location plan with total station surveying showing all individual structures and features like trees, roads, culverts, nallas, electric poles, telephone poles, sewer lines, chambers, water supply lines, hand pumps, well etc. complete along with showing location of roads proposed in master plan. i/c Contours of entire area at 0.5 m. intervals using auto level, preparing of site plan in soft copy (using autocad) in suitable scale as desired by engineer-in-charge duly indicating north direction. Rate includes providing 1 digital copy and six hard copies, one print on tracing film, khasra map duly showing the land and location plan (index plan) and google image of the land. Rates are inclusive of transportation charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) 29. 1.1 Upto 1 Hectare 29.1.2 1 Hectare to 2 Hectare 29.1.3 Add extra for each additional one Hectare or part there off 29.1.4 Excavation of trial pit of size 1.20 m X 1.20 m with minimum depth of 0.9 m and maximum depth of 3.5m as directed by the Engineer in Charge. Trial pit shall be taken at suitable location/ locations as directed by Engineer in charge and shall be indicated on the site plan showing details of soil strata. 1240 29.2 Preparation of double line plan after measurement of internal as well as external dimensions of existing buildings/structures and plotting the same in suitable scale as directed by Engineer-in-charge. 1241 29.3 Preparing of double line plan for planning of addition and alteration work after measurement of internal as well as external dimensions and details of existing door window, ventilator openings and partitions, addition /alteration done previously in buildings/structures and plotting the same separately showing sectional elevations (minimum two numbers) and all elevations along with all relevant details like doors, windows stairs etc in suitable scale as directed by Engineer-in-charge. The consultant shall also submit detailed condition survey report. 1242 29.4 Performing Plate Load Test (P.L.T.) for Determining soil bearing capacity (SBC) at site including submission of Geotechnical Report and recommending bearing capacity in accordance with IS-1888-1982 (Without Conveyance). 1243 29.5 Performing Standard Penetration Test for determining soil bearing capacity (SBC) in accordance with IS-2131-1981 and submission of Geotechnical Report on bearing capacity based on SPT in accordance with IS-6403-1981 (Without Conveyance) 1244 29.6 Transportation charges for transportation of Geotechnical testing equipments for plate load test or standard penetration test upto a distance of 100km. (upto 100km going and 100km returning from district H.Q. both way) Rates are inclusive of Loading and unloading of testing equipments and other incidental charges during both journeys to be paid only once for one set (separate for PLT or SPT) of testing. 29.6.1 Up to 100km (both way) 29.6.2 Add extra for distance beyond 100km and upto 150km. (both way) 29.6.3 Add extra for every additional km beyond 150km (both way) 1245 29.7 Preparation of detailed estimate on the basis of the working drawing supplied by the department and current SOR applicable, including computation of bill of quantities (BOQ) of material and supplying the same in six hard copies and one soft copy to the Engineer-in-Charge and if required revision of the same without any additional charges. (Work shall be got done through consultants duly empanelled with chief Architect MP P.W.D.) The estimate shall be prepared only in standard format prescribed as per appendix 14 of this SOR. 1246 29.8 Preparation of DPR including site visit to verify contours & soil reports and preparation of master plan of campus including architectural working drawings and estimates in prescribed format as per appendix 14 of this SOR to obtain AA; and there after architectural drawings for statutory approvals and detail drawings at construction stage; and as constructed drawings on completion of work the DPR. Bifurcation of professional fee payable in stages as per this item shall be in accordance with List-1, List-2 & List-3. Given in preambles of this chapter 3.All work such as preparation of DPR, working drawings, statuary drawings, details drawings and as constructed drawings shall be done by the same architect/consultant to ensure consistency in services, even if time required to complete all stages as per Activity sheet exceeds the contract period. 1247 29.9 Preparation of the structure design & drawings by a structural engineer empanelled with the Chief Architect MP PWD on the basis of architectural drawings supplied/approved by the department, in accordance with relevant codes/manuals and according to the Terms & Conditions, prescribed in Activity Sheet No-1, List-4 given in Annexure-14 appended with SOR. Design and drawing shall also include ‘Tables’ for the bar-bending schedules (BBS) and concrete/steel consumption. The design and drawing shall be submitted to the Engineer-in-Charge in six hard copies and one soft copy for execution. The payment shall be done in accordance with relevant stage in activity sheet and list. 29.9.1 First time design work 29.9.1.1 Built up area upto 500 sqm 29.9.1.2 Built up area more than 500 sqm and upto 3000 sqm 29.9.1.3 Built up area more than 3000 sqm. 29.9.2 Repetition of structural design of a structural design done by the structural himself or by any other structural engineer at different site, where S.B.C. or seismic zone is different.(only plinth area payment to be paid) 29.9.2.1 Plinth area upto 500 sqm 29.9.2.2 Plinth area more than 500 sqm and upto 3000 sqm 29.9.2.3 Plinth area more than 3000 sqm 1248 29.10 Assessment of load carrying capacity and structural soundness of existing building mainly comprising of R.C.C. structure using existing information such a existing drawing, design and footing details, if available. The consultant shall carry out destructive/non destructive testing of structure at site including site investigation which may require opening of footings by digging adjoining ground fill and restore backfill structure after testing is done. This work shall be performed by a structural engineer (proof checking) empanelled with the chief Architect MP PWD Bhopal or any government engineering college. The rate shall include all charges for labour, testing, consultation of geotechnical consultant and site visit to carry out site testing Per Sqm (built up area of wing/block of existing building where construction is proposed). 1249 29.11 Drafting structural drawing on the basis of the structural design supplied by the department in accordance with all relevant codes/manuals and as per IS: 1893- 2002 and IS: 13920-1993 with updation. The work shall include making revision/compliance if any and obtaining approval of drafting work, without any additional cost within time specified by the Engineer-in-Charge or from the competent authority. The drawings for approval shall be submitted to the Engineer- in- Charge in two hard copies (minimum size A-2) and there after fair drawings on 100 micron film along with seven copies of amonia prints (minimum size A-1) and one soft copy. Drawings shall be stamped and signed with the statement that Drafted by me as per structural design done or got done by the department. Note:- This work can be done only through a person having qualification of Diploma in civil engineering/BE (civil engineering) and having certificate in AutoCAD issued by AutoDesk or by its authorized institution.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Madhya Pradesh View Result →
29.
Drinking Water Supply and Sanitation #9443561 Technical Bid
Supply And Laying Of Ms Saw Feedermain Pipe Parallel To Existing Grp Feedermain Pipeline Dia 1500Mm 1400Mm 1200Mm For Kanpur Water Supply Scheme Through Ganga Barrage From Company Bagh Chauraha To Phoolbagh Ips
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
30.
Drinking Water Supply and Sanitation #9443558 Technical Bid
Tender For Supply And Laying Of Ms Saw Feeder main Pipe Parallel To Existing Grp Feedermain Pipeline Dia 1200Mm 1000Mm For Kanpur Water Supply Scheme Through Ganga Barrage From Cti Tiraha To South Gate Baradevi
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
31.
Drinking Water Supply and Sanitation #9328569 Technical Bid
New Raw water Head Works at Pullagoundaenpatty in Komarapalayam Municipality.; 1 The rates for earth work excavation and refilling for pipe line works having bed width of 1.25m and below on linear measurement basis - Earth work rate for other than loose soil/m PVC/HDPE/GRP + Refilling the trenches with excavated earth (other than sand) in layers and watering, ramming and consolidation as per standard specification etc complete and as directed by Engineer in charge. 2 250mm Dia DI pipe 3 400mm Dia DI pipe 4 500mm Dia DI pipe K7 5 Earth work excavation and depositing on bank within an initial lead of 10 m and following lift and classification of soils.Hard stiff caly, stiff black cotton soil hard red earth, shales, murrams, gravel stoney eatch and earth mixed with small sized boulders. 6 Ist depth of 2m(For pump house) 7 Earth work excavation complying with relevant clauses in soft disintegrated rock, laterite, soft rock (or) kankar not requireiung balsting 8 Earthwork Excavation in loose soil 9 Leading Channel 10 Ist depth of 2m 11 Pump Room 12 Ist depth of 2m 13 Earth work excavation complying with relevant clauses in DMR not Requiring Blasting 14 Ist depth of 2m 15 Earth work excavation complying with relevant clauses in DMRRequiring Blastingmeasured in solid II nd depth of 1m 2-3m depth 16 2-3m Depth 17 Earth work excavation inHard rock rock requiring blasting for well cum pump house 18 2m-3m depth 19 3m-4m depth 20 4m-5m Depth 21 5m-6m depth 22 6m-7m Depth 23 7m-8m Depth 24 8m-9m Depth 25 9m-10m Depth 26 10m-11m Depth 27 11m-12m Depth 28 Removing hard rock by blasting and stacking 29 IInd depth of 2m (2m to 4m) 30 III rd depth of 1m (4M to 6m) 31 IV th depth of 1m (6m to 8M) 32 Supplying and filling in foundation andbasement with filling n layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification. 33 Plain Cement Concrete 1:4:8 using 40mm size HBG stone for levelling course of foundation including mixing, placing, ramming, curing and finishing etc. complete 34 Centering for soffits of RCC members or plane surface including shuttering, strutting to the centering and providing supports etc. complete for the following members using MS sheets of size 90x60cm and BG 10 gauge stiffened with welded M.S. angles of size 25x25x3mm laid over silver oak (country wood) joists of size 10 x 6.5 cm spaced at about 90mm c/c and casurina props of 10 to 13 cm dia (spaced at 75cm C/C) for various heights and as directed by the Officers. The centering should beremoved after the specified striping time of the concrete as per IS-456/1978. 35 Plane Surface 36 Base slab 37 0-3.30 m above Bottom Level 38 3.3-4.30 m above Bottom Level 39 4.30-5.30 m above Bottom Level 40 8.30-9.30 m aboveBottom Level 41 11.30-12.30 m aboveBottom Level 42 Square Column 43 0-3.30 m above GL 44 3.30 m-4.30 m 45 4.30 m-5.30 m 46 5.30 m-6.30 m 47 6.30-7.30 m 48 7.30-8.30 m 49 8.30-9.30 m 50 9.30-10.30 m 51 10.30-11.30 m 52 11.30m-12.30m 53 12.30m-13.30m 54 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) 55 Up to Basement 56 Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. 57 Below GL 58 Below G.L . upto 1.50 m depth 59 Below G.Lfrom 1.50 to 4.50 m depth 60 Below G.L beyond 4.50 m -9m 61 Below G.L beyond 9.0 m -13.5m 62 Above GL 63 Above GL upto 4.50 m height 64 Above GL 4.50 m to 7.32m height 65 Above GL upto 7.32 m to 10.98m height 66 Above GL upto 10.98 m to 14.64m height 67 Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors as per standard specification.TNBP-spl 68 Supplying and Delivery of the following Ductile Iron Socket/Spigot pipes and specials K-7 of best approved quality conforming to ISS including cost of all materials, labour, transportation etc., complete complying with standard specification. 69 250mm Dia DI pipe K7 70 400mm Dia DI pipe K7 71 500mm Dia DI pipe K7 72 Refilling as per IS specifications and as directed by the engineers for the following sizes in metres,as per drawing. 73 250mm Dia DI pipe K7 74 400mm Dia DI pipe K7 75 500mm Dia DI pipe K7 76 Supply & delivery of following sizes of DUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASSK7 SPECIALSAS PER IS 9523/2000. 77 250mm D.I. 90 Degree Bend (46 Kg / Nos), 250mm D.I. 45 Degree Bend (36 Kg / Nos), 250mm D.I. 22.5 Degree Bend (31 Kg / Nos) 78 400mm D.I. 90 Degree Bend (113 Kg / Nos), 400mm D.I. 45 Degree Bend (82 Kg / Nos), 400mm D.I. 22.5 Degree Bend (67 Kg / Nos), 500mm D.I. 90 Degree Bend (187 Kg / Nos), 500mm D.I. 45 Degree Bend (135 Kg / Nos), 500mm D.I. 22.5 Degree Bend (107 Kg / Nos). 79 Loweringpipes and specials to trench and layingtopropergradeandalignment andas directed by the Officers. 80 250mm Dia DI pipe 81 400mm Dia DI pipe 82 500 mm Dia DI pipe 83 Jointing the C.I/ D.I - S/S pipes and specials with molten lead and Yarn including caulking the joints. (Including cost of jointing materials) 84 250mm Dia DI pipe 85 400mm Dia DI pipe 86 500 mm Dia DI pipe 87 Cutting C.I./D.I Pipes true to axis and filing smoothly and finishing the ends complete. 88 250mm Dia DI pipe 89 400mm Dia DI pipe 90 500mm Dia DI pipe 91 Barricading work (Where, there is less traffic areas and broader roads etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia and 1.80m height) vertical with orizontal poles in three rows including painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including fixing charges and fixing 75mm dia reflectors including earth work xcavation for fixing vertical posts and finally removing and stacking the aterials safely for further use etc., complete and as directed by Officers. 92 Barricading work (Where the lines are in narrow width of municipality area, busy streets like Market, Bus stand and in the Highways etc.) for laying of pipe line sing casurina poles at 1.50m center to center (8cm to 10cm dia. and 1.80m height) vertical with horizontal poles in two rows, painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including supplying, delivery and fixing of GI sheet (0.90m x 0.8mm thick) in the horizontal poles and fixing 75mm dia. reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as irected by Officers. 93 Testing of pipes for water supply with hydraulic testing equipment by filling with water (including cost of water @ Rs. 60/KL) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes. 94 250mm Dia DI pipe 95 400mm Dia DI pipe 96 500mm Dia DI pipe 97 Disposal of surplus earth including loading, conveyancewithin a distanceof5 km and spreading as directedbythe Engineer in charge. 98 Supply, Delivery and fixingof DI D/F Gate valves (Soft Seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG40 or equivalent grade, wedge fully rubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leakproof with face to face dimentions as CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING All the valves should be with electrostatic powder coating both inside and outside with pocket less straight thro body passage, inside and outside color Blue includingFlange/socket and Flange/spicot tail pieces, etc., loading,unloading, Transportation chargesand stacking etc. complete as per specifications. All the valves are to be compatible for burried application with pressure rating . 99 For isolation/Control 100 500 mm Di gate valve 101 For Scouring 102 400mm Scour valve 103 Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in units of (kilolitres/ cubicmeter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3m/sec to 4 m/sec and be constructed as follows:Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/ Polyurethrene/ PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects Coil Housing shall be fabricated from stainless steel (SS 304) with Anticorrosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP 68 protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions.The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output, Communication interface is RS485, HART output, . The microprocessor based signal converter shall have a selfdiagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”. Converter shall be supplied with a programmable low flow drop out Higher flow and empty pipe zero return. The signal converter housing should be die-cast aluminium with glass window. The converter cum transmitter should be fully programmable form the front facia. The programming should be user friendly, self-prompting menu driven. Flowmeter test calibration certificate from FCRI, flow test lab/ NABL accredited lab to be furnished. 104 500 mm dia @ WTP inlet 105 supply and delivery ofKINETIC AIR VALVES FOR HANDLING MORE VOLUMES OF AIR IN PUMPING MAIN, DOUBLE ORIFICE KINETIC AIR VALVE CONFIRMING TO IS 14845 TAMPER PROOF DESIGN (PN-1) AND WITH 5 YEARS WARRANTY 106 200mm Air Valve for 500 mm Pipe Line 107 Construction of Valve Chamber ofin Brick work with CM 1:5 mix with RCC Slab 100 mm thick including cost and conveyance of all materials and labour charges to site etc., complete as per Standard specification 108 Air Valve chamber 109 Construction of Thrust blocks - with RCC M20 Grade concrete Earthwork - excavation and depositing on bank with an initial lead of 10 m and initial lift of 2 m in trenches (Hard stiff clay, stiff black cotton, hard red earth, shales, murram gravel, stoney 110 500mm - 90 Deg Bend 111 500mm - 45 Deg Bend 112 Brick work in Cement Mortar 1:5 (one cement and five sand) using country bricks 22x11x7cm for basement and superstructures including cost of scaffolding curing and finishing etc. complete 113 Upto 4.5m above Floorslab 114 Above 4.5m from floor level 115 Plastering with CM 1:5 12mm thick (one cement and five sand)including cost of all materials labour,curing etc.Complete complying with standard specification 116 Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers) 117 Special ceiling Plastering with CM 1:3 10mm thick (one cement and three sand) for R.C.C surface including cost of all materials labour,curing etc.Complete complying with standard specification 118 Weathering course with broken brick jelly concrete using20mm size brick jelly with pure slacked lime over RCC roof slab,the proportion being 32:12.5 for the requiring depth of 80mm with requiredslope,including beating thetop surface with wooden beaters etc.complete and finishing the top of the roof with one course of pressed tiles 20cm X 20cm X 20mm using CM 1:3 (one cement and three sand) mixed with crude oil by10% by weight of cement etc., completecomplying with standard specification 119 Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of parts putty wherever required etc., complete complying with standard specification. 120 Supply, delivery and fixing in position of M.S.rolling shutter of following size inclusive of cost of holdfast wind appliances and iron furniture fittings and locking arrangements with two coats of colour painting over one coat of red oxide paint etc. complete compliying with standard specifications and as direvcted by Officers. (Gear operated type) 121 3.00 mx3.60m 122 Supply, delivery fabrication of M.S. Windows including cost M.S. angles of size 50mm x 50 mm x6 mm with 18 guage of M.S.plate, fabrication charges, cost of hold fast, and painting two coatsover one coatof red oxide paint,and transportation charges etc., complete and as directed by Officers. 123 1.20x 0.90 124 Supply, delivery fabrication of M.S. Vendilator including cost M.S. angles of size 502 mm x 50 mm x4 mm with 18 guage of M.S.plate, fabrication charges, cost of hold fast, and painting two coatsover one coatof red oxide paint,and transportation charges etc., complete and as directed by Officers. 125 0.45 mx0.60 m 126 Hire charges for using 7 Nos. of 12.5 HP Diesel pump sets with fuel at 12 hrs per day(Average) for 60 days required for dewatering and tailing out of water for concreting works inside well. 127 Providing GI Handrails as per specifications 128 MECHANICAL WORKS 129 Supply and delivery of Vertical water/oil lubricated statically, dynamically, hydraulically balanced turbine pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 (Reaffirmed 2011 ) to suit the site condition. The speed, No. of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 rpm. The pump includes suitable head shaft, suitable 1.5 metre long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos., 100 litre HDPE Pre- lubricating tank with 20mm PVC Rigid pipe connection along with GM gate valves, Suitable ERW column pipe of each 1.5m long of required Nos. to suit the well depth, Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft -2 set and Spanner - 1 set etc complete 130 5000LPM. Capacity @ 60 mts of total head for each Pump (2W +1S) 131 Supply and delivery of 150 kW vertical Solid shaft AC 3 Phase /415 V/ Vertical Solid Shaft TEFC &SPDP 4 Pole Squirrel cage Induction mortor 1500RPM(IS 325 / IS 12615) suitable for the above pump continuous rated TEFC/SPDP type with Class F insulation for operation in AC, 3 Phase/50 HZ (±5%), 415V (±10%) running with a speed of pump noted above and with inbuilt thrust bearing assembly capable of taking up the entire load and non - reverse ratchet assembly etc., complete. The motor rating noted above is the minimum and shall be such that it should never be over loaded when the pump works at MWL condition and shall be 10% over and above the maximum HP absorbed by the pump. The motor offered should be energy efficiency motors to have maximum efficiency at high power factor. Separate thrust bearing assembly could also be supplied to take up the down load. 132 Supply and Delivery of DI D/F Gate Valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG40, wedge fully rubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as EPR BS 5163-89/ ISI 14846-2000/ DIN 3202 F 4. All the valves should be with electrostatic powder coating both inside and outside with pocket less straight thro body passage. All lthe valves are to be compatible for burried application with pressure rating PN 16 133 350mm dia. PN 16 134 Supply and Delivery of DI D/F Butterfly Valves with GGG400/12 or equivalent grade as per IS 3896 (part 2) 1985 and subsequent revisions double ecentrically disc with renevable soft seal on the disc and body seat face of stainless steel / nickel weld overlay microfinished with powder or liquid epoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside face to face dimensions as per AWWAC 504 or BS 5155 or IS 13095 - PN16 135 500mm dia. PN16 136 Manufacture, supply and delivery of DI D/F Slanted seat Tilting Disc Swing Check Valve in single piece body and closed eye disc construction. Hemisherical disc with 59 degree inclination for fast open and closing. Corrosion proof and wear resistent(triple offset) disc face & body seat face, both made of fusion bonded Nickel Chromium weld overlay and microfinished. Body and disc of ductile cast iron GGG-40, medium free(dry) shafts of stainless steel and bearings of Zincfree Bronze, Valve should have provision for internal damping unit for reducing the effects of water hammer/surge, if required at later stage. Electrostatic epoxy powder/liquid coating(EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 150 microns. The EPDM rubber & Epoxy Powder should be approved by W 270.(EP-P it isa resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated upto 200deg C). Face to face dimensions as per EN 558-1 series 14 and flange connections as per EN 1092-2/I - PN16 137 350mm dia - PN16 138 Supplying Ductile Iron D/F pipes coforming to IS 8329:2000 with latest amendments and conveying to work site, rolling and laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of DI pipes & specials excluding cost of specials and required to fixing of various valves, bulk flow meter on the line , jointing with flanged end to ends with rubber gaskets.jacking and fixing in perfect conditions and giving necessary hydraulic test to the required pressure as per ISS with all lead and lift including cost of jointing materials. (contractor will make his own arrangements for procuring water for testing) 139 350mm dia DI K9 D/F Pipe 140 500mm dia DI K9 D/F Pipe 141 Ductile iron fittings as noted below. DI pipes shallconform to class as per IS: 8329/2000 and pipe specials shall conform to IS: 9523/2000.All pipes and fittings shall be flanged and inter connected to the 600mm dia. pumping main. 142 Jointing following size DI D/F pipes and specials with rubber insertion or any equivalent to the required specifications with M.S bolts and nuts. Complete including charges for special tools and plants such as air compressor and helmets and sheet piles etc., 143 350mm dia 144 500mm dia 145 Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe having calibration of 0-16 kg/cm2. including necessary tools and plants complete as directed by site Engineer. 146 Supply and fixing of Electromagnetic Flow Meter conforming to ISO 17025 Standard shall be a velocity sensing excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions. The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output. The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume.”Converter shall be supplied with a programmable low flow drop out and empty pipe zero return. The signal converter housing should be die-cast aluminium with glass window. The converter cum transmitter should be fully programmable form the front facia. The programming should be user friendly, selfpromptingmenu driven. Flow meter test calibration certificate should be provided with life cycle test certificate from FCRI/NABL accredited lab. Supply and fixing of Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in units of kiloliters and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3m/sec to 4 m/sec and be constructed as follows:Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon street flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber /Polyurethane/PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects. Coil Housing shall be fabricated from stainless steel/SS304/Die cast Aluminium/Carbon Steel with Anticorrosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation. Signal Converter shall be pulsed DC coil 147 Erection of water Lubricated / oil lubricated vertical tur¬bine pump with motor at site of work including prepa¬ration of suitable foundation and bed, fabrication of packer plates from raw materials , cutting required shims , assembling and joining of all required loose components such as bowl assembly, impellor shaft, line shaft, column pipes , head soft, discharge head, bearings, drive unit, delivery side pipes , suitable tap¬pers required valves and specials, pressure gauges and flow meters , adjustment of pump shaft and leveling and alignment checkup greasing of relevant compo¬nents, grouting of foundation bolts and sole plate with non shrink grout materials of conbextra GP-2 cement erection, connecting the relevant electrical cables with motor properly etc. complete and testing the out put and efficiency, site performance test for noise and vi¬bration and trial run for minimum 10 days and commis-sioning satisfactorily for the various HP of the vertical turbine pumpsets as given below per IE rules as directed by Officers. (150 HP) 148 5T capacity hand operated over head Travelling (HOT) crane suitable for a span upto 10 Mtrs, and travel length upto 10 M with clear lift upto 6 M including gear type chain pulley block and geared Travelling trolley complete with all accessories including Vertical ISMB 250 and Horizontal ISMB 350 149 Dewatering by using1 Nos. of Diesel Pumpsets of7.50 HP (Hire Charges) 150 Dewatering by using1 Nos. of Diesel Pumpsets of10.0 HP(Hire Charges) 151 Providing sand bags in the erected berms including cost and conveyance of sand, supply of empty bags, loading and unloading, filling in bags with sand, shuttering hem and planning and erected berms as directed by department officers etc., complete. 152 GST Amount for providing Service to Government Contract Works for the Above construction works. (GST Amount is the Total GST Amount for total overall quoted amount above this row for this work)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
32.
Housing Urban and Rular Development #9304341 Technical Bid
Inviting Rates For Repairing Of Grp Pipe And Sluice Valve Spindle For 85 Cusec Gangajal Pariyojna Greater Noida
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Uttar Pradesh View Result →
33.
Public Administrative Department #9286614 Technical Bid
Expression Of Interest For Preparing Estimate For Establishment Of Cctv Surveillance System At Various Areas Of Saoner City- 1 Establishment Of Cctv Surveillance System At Various Areas Of Saoner City 2 1. Supplying, Erecting, Testing & Commissioning Of 1000Va Line Interactive Ups.Power Rating: 1000Va / 600W, Voltage: 230 Vac ± 10% ( Battery Mode ) , Frequency Range: 50 / 60 Hz ± 1 Hz, Waveform ( Batt. Mode ) : Simulated Sinewave, Receptacle: India Socket X 4, Battery Type & Number: 12V / 7 Ah X 2, Recharge Time: 4 ~ 6 Hours To 90%, Cold Start: Yes, Indicator: Led, Communication Interfaces: Usb Port X 1, Operating Temperature: 0 ~ 40ºc, Altitude: 0 ~ 1000M, Relative Humidity: 0 ~ 90% ( Non-Condensing ) , Audible Noise: < 40 Db, Safety: Bis. 3 2. Supplying, Erecting, Testing & Commissioning Of 8 Port Network Poe Switch.10 / 100 / 1000 Base-T, Poe Smart Switch Plus 1 Sfp Erected In Provided Rack Compliant With Ieee 802.3 Standards Complete. 4 3. Supplying And Fixing 6U Hybrid Ip66 Outdoor Mount Server Rack With Pole Mount Bracket ( Dimension-Dxwxh - 500X550x350 Mm ) As Per Specification No. Wg-Nas / Rak. 5 4. Supplying And Installing Outdoor Cat 6 Cable Fr Pvc Sheathed Aluminum Foiled Wrapped Over Alltinned Copper Braided Hdpe Insulated Copper Cat-6 Stp Cable Suitable For Networking Compliant With Ansi / Tia-568.2-D Standards In Provided Conduit / Casing-N-Capping As Per Specification Eccs Tape Armouring, Suitablewith Electro Magnetic Interference, High-Speed Transmission Of Data Such As Analog, Digital, Voice Or Video Signals, Features Uv Resistant Jacket With Mechanical Anti Rodent, Double Sheath Material, Follows International Standards Ansi / Tia-568-C.2 Standards And Iso / Iec 11801, Supports Gigabit Ethernet ( 1000 Base-T ) . 6 5. Supplying, Erecting, Testing & Commissioning Of 32Ch 4K Uhd Ai H.265+ Nvr User Interface: Graphic User Interface ( Gui ) Operating System: Embedded Linuxoperation Mode: Preview, Record, Playback, Backup, Network.Password Security: Multi-Level User Management.Onvif: Support.Video Input: 32Ch 5M / 16Ch4k / 16Ch1080p.Hdmi Output: Supports 2 ( Max: 4K ) .Vga Output: Supports 1 ( Max: 1080P ) .Audio Input: 1 Ch Audio Output:1 Ch, Rca Connector.Display: 1 / 4 / 6 / 8 / 9 / 10 / 13 / 16 / 25 / 32 Optional.Video Standard: Pal / Ntsc.Video Compression: H.265Ai / H.265+ / H.265 / H.264+ / H.264.Intelligent Functions: Trip Wire, Face Detection, Vehicle Detection, Ip Based Pa System, Line Draw.Video Encoding Resolution: 12Mp; 8Mp; 5Mp; 4Mp; 3Mp; 1080Psynchronous Playback 8Chvideo Frame Rate: Pal: 1-25 Fps Ntsc: 1-30Fpsvideo Bit Rate: 1536Kbps-3072Kbpsstream Type: Video & Audio / Videoaudio Compression G.711Arecording Mode: Always / Schedule / Alarm / Recording / Motion Detection Recording.Video Search: Time / Channel / Eventdisplay: Zoom Live Playback & Mobileaudio Bit Rate: 8—32Kbps, Dual-Stream Supportsmobile Monitoring Application For Android And Iphonerecording Resolution 32 Ch Realtime Recording.Hdd Port: 8 Sata Hdd Maximum Capacity: 12Tb For Each Sata Connector.Voice Talk Support, 1Ch Bnc Line In / 1Ch Rca Audio Out.Record Mode Audio & Video Recording Simultaneouslyremote Control Supportsnetwork Protocol Supports Ie / Pppoe / Ddnsincoming Bandwidth: 288Mbps Outgoing Bandwidth: 288Mbpsnetwork 2 Rj45 : 10M / 100M / 1000Musb Connector : 2 X Usb2.0 1 X Usb3.0Firmware Update Support Usb Update / Network Updatealarm Input 16, Alarm Output 4Intelligent Ai Feature Vehicle Detectionpower Supply Atxoperation Temperature -10?--+55?Operation Humidity 10%--90%Certifications Ce, Fcc, Rohs, Bis 7 6. Supplying, Erecting, Testing & Commissioning Of 5Mp H.265+ Ir Bullet Network Camera 80 Meter.Image Sensor 1 / 2.5 5 Megapixel Sony Cmosimage Pixels Max: 2592 X 1944 Pixels ( 5.0 Mega Pixels ) Min. Illumination 0.01Lux @ ( F1.2, Agc On ) , 0Lux With Irday / Night Auto ( Icr ) / Color / Black & Whitewdr =120Dbir Led Yesir Distance80 Meterslens Mount 12.0Mm Fixed Lensnetwork Interface 10 / 100 Mbps Rj45 Connectornetwork Protocol Http, Tcp, Arp, Rtsp, Rtp, Udp, Rtcp, Smtp, Ftp, Dhcp, Dns, Ddns, Pppoe, Ipv4 / V6, Snmp, Qos, Upnp, Ntpelectronic Shutter Speed Manual / Auto ( 1 / 25 ~ 1 / 100000 S ) Ddns Service Free Ddnsonvif Protocol Supportsvideo Encoding H.265+, H.265 And H.264Video Bitrate 128Kbps ~ 8Mbpsvideo Streams Main Stream : 2592 X 1944; Sub Stream 1: 720 X 576; Audio Input Yes 1 Channelaudio Output Yes 1 Channelaudio Bitrate 64Kbps ( G.711 ) / 16Kpbs ( G.726 ) Image Setup Mirror Image / Reverse / Color Settingsalarmmotion Detection, Human Detection, Video Loss, Ipc Alarmai ( Artificial Intelligence ) Vehicle Detection, Face Detection, Active Deterrence, Line Crossingoperation Temperature -10°C ~ +55°Coperation Humidity 0% ~ 90%Power Supply Dc12v / 2Amperespoe Poe ( Ieee802.3Af ) Power Consumption =3.5W ( Without Ir ) Material Metal Body / Abs Housingip Rating Ip67rj45 Connectorweatherproof Rj45 Connectorir Schedule Function Availablecertifications Ce, Fcc, Rohs & Bis 8 7. Supplying, Erecting, Testing & Commissioning Of 5Mp H.265+ Ir Varifocal Bullet Network Camera 30 Meter.Image Sensor 1 / 2.7“ Progressive Scan Cmosimage Pixels 2592 X 1944 Pixels ( 5.0 Mp ) Minimum Illumination Color: [email protected]; B / W: [email protected], Day / Night Auto ( Icr ) / Color / Black & White Wdr ( Wide Dynamic Range ) =140Dbir Led 4 Pcs High Power Led Array Ir Distance 30 ~ 100 Meters, Shutter Type Manual / Auto Shutter Speed 1 / 25S ~ 1 / 100000S Lens Mount 2.8Mm~12.0 / 6.0Mm~22.0Mm / 5~50Mmmotorized Auto-Focus Lenssd Card Supported ( Max: 512 Gb ) Network Interface 10 / 100 Mbps Rj45 Connectornetwork Protocol : Http, Tcp, Arp, Rtsp, Rtp, Udp, Rtcp, Smtp, Ftp, Dhcp, Dns, Ddns, Pppoe, Ipv4 / V6, Snmp, Qos, Upnp, Ntpvideo Encoding H.265Ai / H.265+ / H.265 / H.264+ / H.264Video Bitrate 128Kbps ~ 8Mbpsvideo Streams Triple Stream Video Stream Resolution Max : 2592 X 1944; 2304 X 1296; 1920 X1080; 720 X 576; 25 / 30 Fpsdigital Zoom Supported ( Max: 16X ) Audio Input Yes; 1Ch; 2Vp-P 1K?, Audio Output Yes; 1Ch; 16?Audio Compression G.711Aimage Setup Mirror Image / Reverse / Color Settingsalarm Yes, Intelligent Ai Feature Face Detection, Vehicle Detection, Human Detection, Active Deterrence, Line Crossing, Trip Wireoperation Temperature -10°C ~ +65°Coperation Humidity 0% ~ 90%Power Supply Dc12v, Poe ( Ieee802.3Af ) ( Class 0 ) Power Consumption =3.6W Without Ir; =8W With Irmultiple Browsers Supports ( Chrome, Mozilla, Edge, Opera ) Housing Material Aluminum + Absingress Protection Ip67certifications Ce, Fcc, Rohs, Bis. 9 8. Supplying, Erecting, Testing & Commissioning Of 5Mp 44X H.265+ Network Speed Dome Ptz Camera.Image Sensor 1 / 2.7 5Mp Progressive Scan Cmoslens 4.5Mm ~ 165Mm ( 44X Optical Zoom ) Iris Auto / Manual ; F1.6 ~ F4.8Shutter Auto / Manualshutter Time 1 / 2S ~ 1 / 20000Sminimum Illumination Color: 0.1 Lux B / W: 0.01 Lux ( Ir On: 0.0 Lux ) S / N Ratio = 50Dbday / Night Mode Ir-Cut Filter With Auto Switch ( Icr ) Ir Distance 300 Metersvideo Compression H.265+, H.265 & H.264Video Resolution 2592 X 1944 Pixels ( Max ) Video Streaming Triple Streams Osd Up To 8 Osdsprivacy Mask Up To 8 Areasdigital Zoom Supportsnetwork Protocols L2tp, Ipv4, Igmp, Icmp, Arp, Tcp, Udp, Dhcp, Pppoe, Rtp, Rtsp, Qos, Ntp, Ftp, Http, Snmp, Sipcompliance Onvifpan Range 360° Endlesspan Speed 0.02° / S~120° / Stilt Range -15° ~ +90° ( Auto-Reverse ) Tilt Speed 0.1° / S~160° / Sauto Flip Pan: 180°; Tilt: 93°A.I ( Artificial Intelligence ) Face Detection, Vehicle Detection, Line Crossing, Active Deterrencepresets 220 Presetsdwell Time 1S ~ 60S Selectable Guard Tours Minimum 3 Toursguard Points Min: 16 Points Per Tourpark Time 1 ~ 60 Minutesnetwork 10M / 100M Base-Tx Ethernetlocal Storage Micro Sd Card Upto 256Gbdigital Defog Availableworking Temperature -40°C ~ +65°Cworking Humidity =90% Rh ( Non Condensing ) Ingress Protection Ip67lightning Protection Transient Voltage 6000Vcertifications Ce, Fcc, Rohs & Bis 10 9. Supplying, Erecting, Testing & Commissioning Of 6Mp H.265+ Ir Dome Network Camera 50 Mtr.Image Sensor: 1 / 2.7“Progressive Scan Cmosimage Pixels: 3072 X 2048 Pixels ( 6.0Mp ) Minimum Illumination Colour: [email protected]; B / W: [email protected] / Night Auto ( Icr ) / Colour / Black & Whitewdr ( Wide Dynamic Range ) : =140Dbir Led: 24 Pcs Smd Ir Ledir Distance: 50 Metersshutter Type Manual: / Autoshutter Speed: 1 / 25S ~ 1 / 100000S Lens Mount: 2.8Mm~12.0 / 6.0Mm~22.0Mm / 5~50Mm Motorized Auto-Focus Lenssd Card: Supported ( Up To 512 Gb ) Network Interface: 10 / 100 Mbps Rj45 Connectornetwork Protocol: Http, Tcp, Arp, Rtsp, Rtp, Udp, Rtcp, Smtp, Ftp, Dhcp, Dns, Ddns, Pppoe, Ipv4 / V6, Snmp, Qos, Upnp, Ntpvideo Encoding: H.265Ai / H.265+ / H.265 / H.264+ / H.264Video Bitrate: 128Kbps ~ 8Mbpsvideo Streams: Triple Streamvideo Stream Resolution: Max: 3072 X 2048; 2592 X 1944; 1920 X 1080; 720 X 576; 25 / 30 Fpsdigital Zoom: Supported ( Max: 16X ) Audio Input: Yes; 1Ch; 2Vp-P 1K? Impedance Audio Output: Yes; 1Ch; 16? Impedanceaudio Compression: G.711A ( Optional ) Image Setup: Mirror Image / Reverse / Colour Settingsalarm: Yesintelligent Ai Feature: Face Detection, Vehicle Detection, Human Detection, Active Deterrence, Line Crossing, Trip Wireoperation Temperature: -10°C ~ +65°Coperation Humidity: 0% ~ 90%Power Supply: Dc12v, Poe ( Ieee802.3Af ) ( Class 0 ) Power Consumption: =3.6W Without Ir; =8W With Irmultiple Browsers: Supports ( Chrome, Mozilla, Edge, Opera ) Housing Material: Aluminiumingress Protection: Ip67certifications: Ce, Fcc, Rohs, Bis. 11 10. Supplying & Erecting 55 Professional Led Display With 1920 *1080 ( Full Hd ) Display, Suitable For 32 / 64 Channel Nvr And Following Features, Brightness: Minimum 500 Cd / M2contrast Ratio: Minimum 1000:1 Viewing Angle: 178 / 178 Deg.Response Time: Maximum 8 Ms, Inputs: Hdmi, Vga, Bnc, Usb, Audio In, Built-In Speakers Maximum 10 W, Suitable To Operate On 100-240 V 50 Hz Ac Supply And 24 / 7 Duty Cycle Duly Erected On Wall Or Table Top With Standard Accessories Like Wall Mount Stand And Wiring Connections Etc. Complete As Per Specifications. 12 11. Supplying & Erecting 4 Tb Internal Surveillance Hdd.Suitable For Sata Port Of Nvr, Interface Transfer Rate 6 Gb / S, Maximum Sustained Transfer Rate 150Mb / Sec To 180Mb / S. Drive Bay Supported 08+, Cameras Supported Up To 64, Cache ( Mb ) 64, Load / Unload Cycle -3000000, Work Load Rating Per Year 180Tb, Mtbf 1000000 Hrs. Https. Rohs, Ul, Ce Certified, Duly Erected In Position In Provided Nvr As Per Specification. 13 12. Supplying, Erecting, Testing & Commissioning Of Server With Video Management Software.The Unified Video Management Software ( Vms ) Shall Be Ip-Enabled Security & Safety Software Solution. The Vms Shall Support Industry Standard For The Interface Of Ip-Based Physical Security Products, Onvif And Shall Be Based On A Server / Client Model. The Vms Shall Be Based On A True Open Architecture That Shall Allow For Use Of Non-Proprietary Workstation And Server Hardware, Non-Proprietary Network Infrastructure And Non- Proprietary Storage. The Vms Shall Offer A Complete And Scalable Video Surveillance Solution Which Allows Cameras To Be Added On A Unit-By-Unit Basis. All Software And Firmware Upgrades Shall Be Free Of Charge During The Warranty Period. The Vms Should Support Multiple Recording Server Should Be Expandable To Unlimited Number Of Cameras Should Have Scalable Distributed Network Architecture Supporting Multiple Recording Servers Per Management Server. Vms Shall Be Open To Any Ip And Analog Cameras Integration. It Should Support Windows Operating System On Server Machine. The Vms Shall Consist Of A Role-Based Architecture; Roles Can Be Moved From One Server To Another Without Disturbing The Regular Operations. It Should Support Video Wall And Multiple Monitor Support For Scalable Video Display Of Large Number Of Cameras. ( 64 Cameras X 4 Screen ) It Should Support Four Plex Mode Via Live View, Recording And Playback Simultaneously. It Should Support E-Maps Showing Real Time Device Alarms With Option To View Live Or Recorded Video It Should Support Recording Of All Video Streams Supplied From Ip Cameras / Encoders. The Same Shall Be Digitally Encoded In Mpeg-4, Mpeg-2, Mjpeg, H.264 Or Compression Formats And Can Be Recorded Simultaneously In Real Time. It Should Support Recording Of All Video Streams Supplied From Ip Cameras / Encoders. The Same Shall Be Digitally Encoded In Mpeg-4, Mpeg-2, Mjpeg, H.264 Or Compression Formats And Can Be Recorded Simultaneously In Real Time. Vms Features The Software Should Have The Following Features Supported: Should Allow Configuration All Functionalities Of The Camera Once The Same Is Connected To The Software. Should Allow The Configuration Of The Following Camera Parameters As Mentioned Below: Discovery On Ip Network And Set Ip Address, Frame Rate, Resolution, Motion Detection Within Camera Or Server Based, Bit Rate, Key Frame Interval, Digital I / O, Audio Inputs / Outputs, Facilitate Update Of Camera Or Encoder Thru The Vms The Vms Shall Allow Independent Configuration Of Each Camera And It Shall Also Have A Configuration Tool To Copy A Specific Or All Configuration On Other Cameras. 14 13. Ip Based Public Address System With Existing Cctvweather Proof Horn Type Speaker ( 15 Watt ) Housing: Special Plastic / Die Cast Aluminium / Polyester Resin Armoured With Fibreglass / Equivalent Industrial Grade Material. Ingress Protection: Ip65 Rated Power: 15-Watt Frequency Range: 370Hz To 7000Hz Dispersion-6Db-: 140° / 40° 1 Khz / 4Khz. Indoor Speaker ( 10 Watt ) Housing: Special Plastic Ingress Protection: Ip32 Rated Power: 10-Watt Effective Frequency Range: 100 To 20000Hz. Zone Station Wireless Microphone Hands-Free, Wall Mounted / Desk Top, Dual Direct. • Location Indoor / Outdoor • Mounting Desk / Wall Mounted • Protection Corrosion Resistant & Pilfer Proof. • Protection Class Ip65 • Body Heavy Duty Grp. • Microphone Type Gooseneck ( >400Mm ) . • Volume Control Via Keypad. • Body Moulded Polyurethane • Operating Voltage 24 V Dc Distance 2Km ( Max. ) • Loudspeaker Output Yes. 15 14. Supplying And Erecting Lszh Armoured Multimode Optical Fiber Cable. With 6 Fibers, Core Dia 50 / 125 Μm ( Om4 ) , Suitable Upto 10 Gbps, Compliant To Iec 60793 / Iec 60794 Standards, On Wall / Ceiling Or Laid In Provided Pipe / Trench As Per Specification 16 15. Supplying And Installing 6 Port Single Mode Fiber Adapter Panel Suitable For Fc, Lc, Sc, St Adapters With Ss Plate Complete. 17 16. Supplying And Fixing 24 Ports Liu. Light Guide Unloaded Interconnect Unit, Wall Mounted Type, With Adapter Panel For Termination Of Optical Fiber Cables On Wall In Provided U Rack Complete As Per Specification 18 17. Supplying And Fixing Ip66 Abs Enclosure. For Fiber Splicing With Raised Hinged Splice Trays To House Upto 48 Fibers With Multiple Gland Entry Points Including Heat Shrink Splice Protectors Complete. 19 18. Supplying And Fixing 3 M Utp Patch Cord. 24 Awg Multi Stranded, Utp Patch Cord Of Enhanced Cat 6A Type, Compliant Ansi / Tia-568.2-D Standards In Position As Per Specification. 20 19. Supplying And Fixing Cat 6A 24 Port Patch Panel With Keystone Jacks Compliant With Ansi / Tia / Eia 568.C.2 & Iso / Iec 11810 Complete As Per Specification. 21 20. Supplying And Fixing 42U Floor Mount Server Rack ( Dimension-Dxwxh –800X1000x2070 Mm ) As Per Specification. 22 21. Supplying, Fixing And Configuring Media Converter.1000 Base-T To 1000 Base-Sx ( Sc ) Single Media Converter For Transmission Distance Upto 10 Km With Led Indication Complete As Per Specification. 23 22. Supplying, Fixing, And Configuring 10G Base -Lr ( Sfp+ ) Sm Transceiver Compliant With Ieee 802.3 Standards Erected In Provided Rack Complete. 24 23. Supplying And Installing Single Mode Simplex Pigtail With Sc / Lc Splicing Complete. 25 24. Supplying And Plugging 3 M Fiber Patch Cord Lc-Lc Mm ( 50 ) Om4 Lszh Duplex, Compliant To Iec 60793 / Iec 60794 Standards, Complete As Per Specification. 26 25. Supplying And Fixing Poe Adaptor To Provide Dc Supply To Ethernet Devices As Per Specification. 27 26. Supplying, Fixing, And Configuring Of 24 Port Layer 3 Switch. 20 ( 1G-Rj45 ) Ports + 4 Combo 1G Ports + 4 10G ( Sfp+ ) Ports, Layer 3 Switch, 6Kv Surge Protection On Ethernet Port And Console Port For Management & Support Ospf, Bgp, Mpls, Policy Based Routing Compliant With Ieee 802.3 Standards Erected In Provided Rack Complete. 28 27. Providing & Erecting 6 M High Pole. ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 130 Mm A / F, Top 70 Mm A / F On Provided Foundation As Per Specification. 29 28. Supply, Installing, And Testing Of Maintenance Free Earthing.Comprising Of Electrode Of 17.2 Mm Diameter Low Carbon Steel With 250 Micron Molecular Copper Bonded Earthing Rod Of Length 3M Along With Carbon Based Environment Friendly Back Fill Ground Enhancing Compound Required To Fill Up The Excavated Earth With Required Quantity ( Min. 125Kg ) Complete, And Recording The Results Specification. 30 29. Supplying, Erecting, Testing & Commissioning Of 3 Kva Capacityon Line Pure Sine Wave, Pwm, Igbt Based Ups With 0.8 To Unity Output Pf , Single Phase Input & 1 Phase Output Complete With All Protections As Per Specification ( Without Batteries ) . 31 30. Supplying And Erecting 12 V / 65Ah Smf Battery With Battery Terminal Wire, Duly Charged Complete With 24 Months Warranty Complete. 32 31. Supplying And Fixing Power Distribution Unit For Networking Rack Comprises Of 6 / 16A ( 6 Nos. Sockets ) , 16A Modular Mcb, Appropriate Rating, Enclosed In Black Powder Coated Metal With Necessary Arrangement For Fixing Complete. 33 32. Supplying, Erecting & Terminating 25 M Hdmi Cord Low Voltage Grade Minimum 4K Compliant To Be Laid In Provided Conduits With Male / Female 19Pin Hdmi Connectors Complete. 34 33. Supplying, Installing And Testing Utp Connector ( Rj-45 ) As Per Specification. 35 34. Supplying, Fixing, And Configuring Broadband Router With All Accessories On Provided Rack. 36 35. Making Trench In Hard Murum / Tar Road Having 0.9M Depth And Minimum 0.3M Width For Laying Provided Cables Of Voltage Range 3.3Kv To 11Kv Complete As Per Specification. 37 36. Ptz Joystick Cintroller Support Onvif 2.4, Back-End Ptz Is Not Limited By Manufacturers, Easily Achieve Cruise, Pattern Scan And Etc. Plug And Play Without Any Setting, Automatically Add And Distribute Ip Address Support 3D Control, Support 1-64 Level Speed Limit Function , Precise Positioning, Control Agility Improve Operation Speed &Channel Switching Speed Support English Osd Menu, Support 5 Inch Led, Hd Lcd Screen, Control Equipment, Real Time Images Display Support Unlimited Number Of Dome Cameras Insert Support Usb & Hdmi Output, Automatic Matrix Switch Function Support H.265 Decoding, High Compatibility Increase Rocker Vector Control And Control Of The Speed Of The Platform According To The Amplitude Of The Rocker The Key Is Change To The Big And Soft Key , And The Feeling Is More Comfortable. 38 37. Supplying And Laying Of Hdpe Pipe.50 Mm Outside Dia. Double Wall Corrugated Pipes ( Dwc ) Of Hdpe For Enclosing Cable Below Ground / Road Surface, Complete.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Maharashtra View Result →
34.
Defence #9256139 Technical Bid
Repair Rate Contract For Degutting / Regutting Of Metallic & Non-Metallic Hull Fittings Alongwith Miscellaneous Fittings Repair / Renewal Works Onboard In Ships, Yard Crafts, Fdns And Allied Units During Ops / Refit ; 1 Note:Bidders Are Requested To Quote Gst In Terms Of % Only. Example If Gst Is 5% Fill 0.05 In The Gst Column 2 Services 3 Removal Of Cold And Hot Lagging. 4 Refitment Of Cold And Hot Lagging ( Mfwb / Fat Yard Supply. All Other Material Vendor Supply ) 5 Removal Of Wooden Paneling With All Accessories Without Damage. 6 Re-Fitment Of Wooden Paneling With All Accessories ( Vendor To Use Existing Panelling For Refitment And Rectify Any Damage To The Material Occuring During Work ) 7 Removal Of Metal Paneling With All Accessories Without Damage. 8 Re-Fitment Of Metal Paneling With All Accessories ( Vendor To Use Existing Panelling For Refitment And Rectify Any Damage To The Material Occuring During Work ) 9 Removal Of Pipes, Angle Bars & Misc Deck Fittings. 10 Refitment Of Pipes, Angle Bars & Misc Deck Fittings. 11 Removal Of Electrical Wiring ( Bunch Containing Upto 6 Cables ) 12 Refitment Of Electrical Wiring ( Bunch Containg Upto 6 Cables ) 13 Removal Of Cable Trays Along With Clamps 14 Refitment Of Cable Trays Along With Clamps 15 Removal ( Including Gas Cutting Works ) And Refitment ( Including Welding Works At The Base Only ) Of Foundation Of Miscellaneous Machinery ( A ) Below 25 Kgs 16 Removal ( Including Gas Cutting Works ) And Refitment ( Including Welding Works At The Base Only ) Of Foundation Of Miscellaneous Machinery ( B ) 26 - 50 Kgs 17 Removal ( Including Gas Cutting Works ) And Refitment ( Including Welding Works At The Base Only ) Of Foundation Of Miscellaneous Machinery ( C ) Above 50 Kgs 18 Installation Of Safety Net & Material Of Suitable Size ( Net To Be Provided By Vendor ) For Technical Window. 19 Removal Of Soft Patch ( Size - 3 X 1.5 Mtrs ) With All Accessories. Crane Services Wil Be Provided By The Yard. ( Ss Nuts & Bolts - Aisi 314 Stainless Steel ) Including Breaking Of Grp Coating. Safety Net To Be Installed In Lieu Of Soft Patch. Net To Be Provided By Vendor. 20 Refitment Of Soft Patch ( Size - 3 X 1.5 Mtrs ) With All Accessories. Crane Services Wil Be Provided By The Yard. ( Ss Nuts & Bolts - Aisi 314 Stainless Steel ) Including Grp. Safety Net To Be Removed Prior Refitment Of Soft Patch. 21 Removal Of Soft Patch ( Size - 4 X 3 Mtrs ) With All Accessories. Crane Services Wil Be Provided By The Yard. ( Ss Nuts & Bolts - Aisi 314 Stainless Steel ) . Safety Net To Be Installed In Lieu Of Soft Patch. Net To Be Provided By Vendor. 22 Refitment Of Soft Patch ( Size - 4 X 3 Mtrs ) With All Accessories. Crane Services Wil Be Provided By The Yard. ( Ss Nuts & Bolts - Aisi 314 Stainless Steel ) . Safety Net To Be Removed Before Refitment Of Soft Patch. 23 Removal Of Soft Patch ( Size - 4.5 X 3 Mtrs ) With All Accessories. Crane Services Wil Be Provided By The Yard. ( Ss Nuts & Bolts - Aisi 314 Stainless Steel ) Including Grp. Safety Net To Be Installed In Lieu Of Soft Patch. Net To Be Provided By Vendor. 24 Refitment Of Soft Patch ( Size - 4.5 X 3 Mtrs ) With All Accessories. Crane Services Wil Be Provided By The Yard. ( Ss Nuts & Bolts - Aisi 314 Stainless Steel ) . Safety Net To Be Removed Before Refitment Of Soft Patch. 25 Removal Of Soft Patch ( Size - 5 X 1.2 Mtrs ) With All Accessories. Crane Services Wil Be Provided By The Yard. ( Ss Nuts & Bolts - Aisi 314 Stainless Steel ) Including Grp. Safety Net To Be Installed In Lieu Of Soft Patch. Net To Be Provided By Vendor. 26 Refitment Of Soft Patch ( Size - 5 X 1.2 Mtrs ) With All Accessories. Crane Services Wil Be Provided By The Yard. ( Ss Nuts & Bolts - Aisi 314 Stainless Steel ) . Safety Net To Be Removed Before Refitment Of Soft Patch. 27 Removal Of Soft Patch ( Size - 3 X 3 Mtrs ) With All Accessories. Crane Services Wil Be Provided By The Yard. ( Ss Nuts & Bolts - Aisi 314 Stainless Steel ) Including Grp. Safety Net To Be Installed In Lieu Of Soft Patch. Net To Be Provided By Vendor. 28 Refitment Of Soft Patch ( Size - 3 X 3 Mtrs ) With All Accessories. Crane Services Wil Be Provided By The Yard. ( Ss Nuts & Bolts - Aisi 314 Stainless Steel ) . Safety Net To Be Removed Before Refitment Of Soft Patch. 29 Removal Of Cargo Hatch With All Accessories. Crane Services Wil Be Provided By The Yard. Safety Net To Be Installed In Lieu Of Cargo Hatch. Net To Be Provided By Vendor. 30 Refitment Of Cargo Hatch With All Accessories. Crane Services Wil Be Provided By The Yard. Safety Net To Be Removed Before Fitment Of Cargo Hatch. 31 Fabrication And Welding Of Clamps For Fitment Of Electrical Items / Accessories. 32 Removal Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Rectangular- 1 X 6 33 Removal Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Rectangular- 1 X 1 34 Removal Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Rectangular- 2 X 1 35 Removal Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Rectangular- 3 X 2 36 Removal Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Rectangular- 3 X 3 37 ( Removal Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Circular- Dia Upto 1 Feet 38 Removal Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Circular- Dia 1 - 2 39 Removal Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Circular- Dia 2 - 3 40 Repair And Re-Fitment Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Rectangular- 1 X 6 41 Repair And Re-Fitment Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Rectangular- 1 X 1 42 Repair And Re-Fitment Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Rectangular- 2 X 1 43 Repair And Re-Fitment Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Rectangular- 3 X 2 44 Repair And Re-Fitment Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Rectangular- 3 X 3 45 Repair And Re-Fitment Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Circular- Dia Upto 1 Feet 46 Repair And Re-Fitment Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Circular- Dia 1 - 2 47 Repair And Re-Fitment Of Ventilation Trunking ( Mat: Gi / Alu / Ms ) , With All Fittings. Circular- Dia 2 - 3 48 Removal Of Furniture ( Metallic / Crca / Wooden ) Without Damage. 49 Refitment Of Furniture ( Metallic / Crca / Wooden ) Without Damage. 50 Repair Of Furniture ( Metallic / Crca ) Without Damage. 51 Removal Of Bunks Including Fittings. ( Bunk Unit - 01 No. ) Without Damage. 52 Repair Of Crca Bunks 53 Refitment Of Bunks Including Fittings. ( Bunk Unit - 01 No. ) 54 Removal Of Wooden / Metallic Lockers 55 Repair Of Metallic Lockers 56 Refitment Of Wooden / Metallic Lockers 57 Removal And Repacking Of Cable ( Using Yellow Compound ) 58 Removal Of Tube Light Fittings ( Including Required Electrical Work ) . 59 Refitment Of Tube Light Fittings ( Including Required Electrical Work ) . 60 Removalof Urinals Including Fittings 61 Refitment Of Urinals Including Fittings 62 Removal Of WcS Including Fittings 63 Refitment Of WcS Including Fittings 64 Removal Of Wash Basins And Its Fittings 65 Refitment Of Wash Basins And Its Fittings 66 Removal Of Looking Mirror Of Ss 316 Glass. 67 Refitment Of Looking Mirror Of Ss 316 Glass. 68 Removal Of Galley Electrical Equipment Including Wiring And Fittings 69 Refitment Of Galley Electrical Equipment Including Wiring And Fittings 70 Removal Of Deck Underlay To Bare Metal 71 Application Of Erop ( Including Material Cost ) As Per Is 14506 72 Removal Of Cementing In Ships Engine Room And Other Places With All Accessories. 73 Re-Applying Of Cementing In Ships Engine Room And Other Places With All Accessories. 74 Heating Assistance For Easing Misc Deck Fittings 75 Supply Of Welding / Cutting Team For A Normal Working Day, Team Contains ( 01 Welder / Cutter + 01 Fitter + 02 Helpers ) 76 Supply Of Welding / Cutting Team During Overtime / Night, Team Contains ( 01 Welder / Cutter + 01 Fitter + 02 Helpers ) 77 Miscellaneous Repairs To Metallic / Crca Panels Including Supply Of New Materials. ( Material By Vendors ) . 78 Miscellaneous Repairs To Ss Panels 18 Mm Thickness Including Supply Of New Materials. ( Material By Vendors ) . 79 Miscellaneous Repairs To Shoe Racks, Bunks, Metallic Furniture Etc. 80 Mfg Of Various Types Of Eyes / Brackets With Pad Plates And Linked Fittings Strengthening Members. 81 Renewal Of Miscellaneous Primary Foundations 82 Removal Of All Misc Soft Patches ( All Other Ships ) 83 Refitment Of All Misc Soft Patches ( All Other Ships ) 84 Transportation Of Metal / Non Metal Scrap To Scrap Yard 85 Provision For Fatigue Analysis Of Metallic Pieces / Plates ( Plate Dispatch Only ) Through Nmrl ( Mumbai ) . 86 Carryout Usg On Plating And Structure And Forward Report To Nsry ( Pbr ) . 87 Provision Of Assistance Of Survey Team To The Yard For Visual Survey ( One Team Should Have One Assistant Surveyor Ndt Level Ll Qualified And Two Sskl Level Personnel ) 88 Material: - 89 Angle Bar ( Ms ) 90 Angle Bar ( Aluminium ) 91 Ms Pipes 92 Gi Pipes 93 Aluminium Pipes 94 Flat Bars ( Ms ) 95 Flat Bars ( Aluminium ) 96 Ms Chequered Plate ( 6 Mm Thick ) 97 Aluminium Sheet ( 2 Mm Thickness ) 98 Gi Sheet ( Upto 4 Mm Thickness ) 99 Ss Sheet ( 2 Mm Thickness ) 100 Gi Mesh 101 Gi Elbows And Bends: Gi Pipes Schedule 80 : Confirmto Is 1879 102 Electrodes 2.5 / 3.15 / 4 Mm - E-8018-C For Welding On Dmr 249A Steels Through Navy Approved Vendors, List Of Approved Vendors Placed At Annexure X Of Rfp 103 Spool Wire - Electrode Welding For Dmr 249A Steel Fcaw 1.2 Mm - Ms ( Ihq Approved Vendors ) . 104 Spool Wire - Dmr 291A Welding Wire Al Alloy 1.2 Mm, Spool ( Ihq Approved Vendors ) . 105 Supply Of Lagging Material ( Mwmb / Fat ) : - 106 Phenotherm 1 / A-60 Fat Insulation ( Thickness 25 Mm ) 107 Phenotherm 2 / A-60 Fat Insulation ( Thickness 50 Mm ) 108 Elastometric Nitrile Thermal Insulation By M / S Armacell Pvt. Ltd. To Be Supplied As Per Approved Material As Per Ncd 1433 109 Sheet Rolls ( Width - 1.2 M, Length - 2 M, Thickness 32 Mm ) 110 Sheet Rolls ( Width - 1.2 M, Length - 2 M, Thickness 9 Mm ) 111 Synthetic Rubber Based Adhesive 112 Self Adhesive Nitrile Sealing Tape 113 Polymeric Cladding 114 Performed Pipe ( Length 2 M , Thickness - 32 Mm ) 115 Metal Clamps 116 Glass Fibre Cloth ( 0.5 Mm Thickness, Width 1 Mtr ) 117 Ceremic Fibre Blanket ( 7.62 Mtr X 610 Mm X 25 Mm ) 118 Ss Panels ( 0.9Mm, Single Skin ) 119 Crca Panels ( 0.9 Mm )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 10
Andaman And Nicobar Islands View Result →
35.
Power #9191704 Technical Bid
Procurement Of Grp Pipe And Fittings At Ntpc Khargone , Pipe: Grp,Is11273,924Mm,12M,900Mm , Pipe: Grp,Is14402,718Mm,12M,700Nb , Flange: Pe,Grp,Is14402,Flg,900Mm => Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Andhra Pradesh View Result →
36.
Public Administrative Department #9129263 Technical Bid
Tender for the work of removing leakage of GRP pipe line of drainage in Churu city
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Rajasthan View Result →
Tamil Nadu View Result →
38.
Science and Technology #9054802 Technical Bid
Tender For Rail Monitoring System For Breakage Detection For Elevated Track Ofl8 Between Botanical Garden To Kalkaji-Mandir -Supply, Installation Laying & Blowing In Hdpe Pipe Of Two Core Ofc Cable Include Tc 2F Sm Ut Ofc With 2Frp 0.80 Mm 2 Supply Of Liu ( Light Interface Units With Lc Cnnectors Dimension: 2.5 X 2.5 X 1, Pigtel : Ic, Port : Two, Material: Pvc, Type: Loaded 3 Supply Of 10Metre Lc Single Core Optica Cable With Pig Tail Cable Connector 4 Supply & Laying Of Hdpe Pipe Size Od 20Mm With Acceseoris Outdoor 5 Laying Of Quard Cable Size 20Mm 6 Termination Of Quard Cable 7 Installation Of Optical Fiber Splicing 8 Tapping Of 230V Ac Into Jb 9 Termination Of Power Cable With 4Pole 220V, Supply Of Mcb Of 2 Pole , 415 Vac , 6 Amp 10 Supply, Installation Laying Of Power Cable 3 Core 2.5Sq. Mm Copper 11 Supply Of Pvc Bands 12 Supply Of Flexible Pipe Size 1Inch 13 Supply Instalation Laying Of Pvc Conduit Indoor ¾ Inch With Accessories 14 Supply, Instalation, Laying Of Cat-6 Ethernet Cable For Iot 15 Supply Of 6 Sqmm Cu Cable For Earthing 16 Installation Of Tx Rx Track Sensor Clamp Type 17 1.5 Inch Pvc Pipe Thickness 3Mm 18 Jointing Of Earthing Cable With 12Mm Dmrc Exiting Earhing Cable With Earthing Clamp ( Supplu Of Clamp On Contractor Scope ) 19 Installtion Of Grp Enclosure Between Up And Dn Rail / Walkway By Using Anchor Bolt. 20 Installtion Of Mjb Enclosure On Structure Wall By Using Anchor Bolt. 21 Wiring Between Mjb And Grp Enclosure 22 For Installation Of Grp Enclosure- ( A ) M 10 X120 L Wedgetype Anchor Bolt Withi. M 10 Hex Nut-01 Noii. M 10 Plane Washer -01 Noiii. M10 Spring Washer -01 Noiv. M 10 Nylock Nut-01 No Please Notei. Threaded Length Of Bolt Should Not Less Than 40 Mm.Ii. Hardware Material-Ss304
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
39.
Defence #9014855 AOC
Tender For Repair Replacement And Day To Day Maintenance Of Lt Ug Cable Overhead Line Panel Boards Feeder Piller Junction Boxes And Allied Works At Domestic Area Of Af Station Jammu; 1 Supply laying & testing in replcement of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty)LT 1100 voltgrade with stranded aluminium conductor of size 240 sqmm 3.5 core complete all as specified and directed. 2 All as per srl item No 01 here-in-before but of size 185 Sqmm 3.5 core. 3 All as per srl item No 01 here-in-before but of size 120 Sqmm 3.5 core. 4 All as per srl item No 01 here-in-before but of size 95 Sqmm 3.5 core. 5 All as per srl item No 01 here-in-before but of size 70 Sqmm 3.5 core. 6 All as per srl item No 01 here-in-before but of size 50 Sqmm 3.5 core. 7 All as per srl item No 01 here-in-before but of size 35 Sqmm 3.5 core. 8 All as per srl item No 01 here-in-before butsize 25 sq mm, 3.5 core. 9 All as per srl item No 01 here-in-before butsize 16 sq mm, 4 core. 10 All as per srl item No 01 here-in-before butsize 10 sq mm, 4 core. 11 All as per srl item No 01 here-in-before butsize 10 sq mm, 2 core. 12 Supply,laying & fixing in replacement double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. allas specified and directed by Engr in Charge ofsize 50mm outer dia and 38mm inner dia 13 Ditto all as per items No 12 but of size 77mm outer dia and 63mm inner dia 14 Ditto all as per items No 12 but of size 90mm outer dia and 76mm inner dia 15 Ditto all as per items No 12 but of size 145mm outer dia and 126mm inner dia 16 Cleaning of power housetrenches complete, taking out carefully, manually by removalof existing LT/HT cable with loops and relaying in trench with new sand cushioining the same after cleaning and cable markingwith white paint complete all as specified and directed by Engineer-in-Charge. (at 11KV Power House & 130HU P/H)Note:- (i) cleaningof each power house i.e 11KV Power House & 130HU P/H as per this item will be treated as one Job.(ii)HT/LT Cable Joint & DWC Pipe/Sand will bemeasured and paid sepearetly. (iii) Unit rate shall be included in removal and relaying of filling. (iv) Handling of UG cable to working site as ordered shall be carried out by the firm and rate for the same shall deem to be included in the unit rate. 17 S&FLED Post top light45W 5700K made in die cast aluminium bottom housing and spun aluminium top reflector with decorative PMMA Opal and clear diffuser and IP65 protection complete all as specified and directed by Engr-in-Charge. Make: Bajaj Cat part No - BGCTN 25W LED WH or equivalent in approved makes. 18 S&F any type and any capacity 45 watt of new street light/security lightincluding making electric connection using two run of 1.5 sqmm single core unarmoured wire from junction boxcomplete all as specified and directed by Engr-in-Charge. 19 All as per srl item No 18 here-in-before butCapacity 25watt LED 20 S&FLED Road signal light(Red/Yellow/Green) made in die cast aluminium alloyand IP66 protection complete all as specified and directed by Engr-in-Charge. 21 Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type ofsoil for laying of LT UG cablescomplete. Note:- The Ratequoted deemed to including cutting and removal of PSP Sheets wherever occured during excavation and the same shall be staged at desired location as directed at site 22 Returning, filling in,including spreading levelling, watering and well ramming in layers not exceeding 25 cm thickin hard dense soil 23 Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point 24 S&F any type and any capacity 120 watt of new LED floodlightincluding making electric connection using two run of 1.5 sqmm single core unarmoured wire from junction boxcomplete all as specified and directed by Engr-in-Charge. 25 Supply, Installation and Fixing LT Bus Bar Feeder Pillar 160A shall be OEM made out of GRP, Glass-fiber reinforced polyester SMC as per EN 14598-1-UP FR2 material with Protection class IP 54in accordance with IEC 60529 and Color code RAL 7032 completely dyedin mass and box shall be made out of insulating, slow-burning and self-extinguishing composite (polyester + glass fiber) characterized with resistance to atmospheric agents (UV). Protection class II (EN 61140) when correctly installed on the base and Panel internal sizeshould be not less than 590mm x 800mm x 220 mm. GRP material shall be Anti-corrosive suitable for saline atmosphere and have ambient temperatures of -50°C up to +120°C, Flammability HB 40 a, b (EN 60695-11-10),V-1. Glow wire tested at 960°C/ 3 mm as per EN 60695-2-12. The dimensional stability under heat is more than 200 °C as per ISO 75 – 2 method A . The enclosure is Halogen-free, resistant to termites. GRP cabinet should withstand minimum Di-Electric strength of 130KV/Cm as per IEC 60243-1. he Panel box shall have shall be equipped with GRP handle lock with Manual outer locking and the provision to insert various type of locking cylinders provided to avoid unauthorized access. RoHS Directive (EU) 2015/863 (extension to directive 2011/65/EU),REACH Regulation (EC) no. 1907/2006. The Feeder Pillar with MCCB 160A FP 25KA - 1 No. Panel mounted on suitable MS Angle Stand and Aluminium Bus-bar with Heat Shrinkable Sleeves of capacity 200 Amp,wiring of Panel with suitable size of Copper Conductor Cable, Thimbles, etc. having size of the Panel suitable for fixing the Items/Materials mentioned at here-in-below, complete all as specified and as directed . 26 Notes:-1. The minor items such as Lugs, Nuts and Bolts, Washers, Top Insulators, Sleeves, provision of extra holes in bus bar etc. shall be provided by the Contractor as directed. The Quoted Rate shall be deemed to include the cost of the same and nothing extra shall be admissible from the department on this account what-so-ever.2. All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming to IS-694.3. The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. 27 Supply, Installation and Fixing LT Bus Bar Feeder Pillar 250A shall be OEM made out of GRP, Glass-fiber reinforced polyester SMC as per EN 14598-1-UP FR2 material with Protection class IP 54in accordance with IEC 60529 and Color code RAL 7032 completely dyedin mass and box shall be made out of insulating, slow-burning and self-extinguishing composite (polyester + glass fiber) characterized with resistance to atmospheric agents (UV). Protection class II (EN 61140) when correctly installed on the base and Panel internal sizeshould be not less than 590mm x 800mm x 220 mm. GRP material shall be Anti-corrosive suitable for saline atmosphere and have ambient temperatures of -50°C up to +120°C, Flammability HB 40 a, b (EN 60695-11-10),V-1. Glow wire tested at 960°C/ 3 mm as per EN 60695-2-12. The dimensional stability under heat is more than 200 °C as per ISO 75 – 2 method A . The enclosure is Halogen-free, resistant to termites. GRP cabinet should withstand minimum Di-Electric strength of 130KV/Cm as per IEC 60243-1. he Panel box shall have shall be equipped with GRP handle lock with Manual outer locking and the provision to insert various type of locking cylinders provided to avoid unauthorized access. RoHS Directive (EU) 2015/863 (extension to directive 2011/65/EU),REACH Regulation (EC) no. 1907/2006. The Feeder Pillar with MCCB 250A FP 25KA - 1 No. Panel mounted on suitable MS Angle Stand and Aluminium Bus-bar with Heat Shrinkable Sleeves of capacity 300 Amp,wiring of Panel with suitable size of Copper Conductor Cable, Thimbles, etc. having size of the Panel suitable for fixing the Items/Materials mentioned at here-in-below, complete all as specified and as directed . 28 Notes:-1. The minor items such as Lugs, Nuts and Bolts, Washers, Top Insulators, Sleeves, provision of extra holes in bus bar etc. shall be provided by the Contractor as directed. The Quoted Rate shall be deemed to include the cost of the same and nothing extra shall be admissible from the department on this account what-so-ever.2. All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming to IS-694.3. The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. 29 S&F in replacement Disc type porcelainwhite, brown or green working pressure 11000 volts as specified and directed by Engr-in charge. 30 S&F in replacement Pin type porcelainwhite, brown or green working pressure 11000 volts as specified and directed by Engr-in charge. 31 M & L in replacement of out door aluminuam bus bar chamber feeder box of cap 300 Amp , 3 phase, 4 wire, 415 Volts with porcelain insulator weather and vermin proof with IP 54 protection, made out of 3.15 mm CRCA Sheet duly painted with two coats of synthetic enameld paint over a red oxide primer type ,both side openable,from front side & back having, locking arrangement on both sides,mounted over 50x50x6 mm angle iron stand at the bottom of height not less than 45 cm above ground level and not less than 30 cm in ground / floor mounted duly grouted in PCC 1:3:6 type C1 (using 20mm graded stone aggregate)factory made duly powder coated including taking out of old U/S paneland MCCB 200Amp 25KA four pole x 01 Nos as a Incomer all as directed by Engr-In-Charge. 32 S&Fin replacement of digital Amp meter in existing LT Panel 0 to 300Amp/500Amp with suitable CT and selector switch complete - 01 Set complete all as specified and directed. 33 S&Fin replacement of digital volt meter in existing LT Panel0 to 500V withsuitable selector switch complete all as specified and directed. 34 S&Fin replacement of LED type RYB indicator lamp in existing LT Panelcomplete all as specified and directed. 35 S&FSub main wiring with two single core PVC insulated unshesthed cable copper conductor(FRLS-H) of size 2.5 sqmm multistrandedand one run of 2.5 sqmm PVC insulated unsheathed copper conductor(FRLSH) as earth continuty conductor drawing in and including non-metalic PVC rigid conduit 25mm dia ISI marked with all conduit accessories concealed in wall, cutting of chases in walls, floors, ceilings, beams etc and making good the disturbed surfaces as directed including taking down old unservicable wiring complete all as specified and directed. (Two run of single core cable and one run of earthing cableand one run of PVC conduit shall be measured as one length.) 36 S&F in replacement of barrel type fuse capacity50Ampworking pressure 11000 volts as specified and directed by Engr-in charge. 37 S&F in replacement of barrel type fuse capacity100Ampworking pressure 11000 volts as specified and directed by Engr-in charge. 38 M&L for point wiring with 2.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FRLS unsheathed and multi strandedcopper conductor cable in and including new PVC Concealed conduit 20mm dia 1.5mm thick for one security light controlled by one 15A switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick plastic laminated sheet top cover, sheet screws and PVC boxes after removing old unserviceable plastic laminated sheeet and PVC boxes included 2.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc . complete all as specified and directed for the following :- Note : The cost ofPVC boxes and PVC sheet is included in the quoted rate) 39 S&F switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed 40 S&Fin replacementceiling rose 65X50 mm two to three terminals complete all as specified. 41 S&Fstreet light bracket made out of GI pipe 40/32 mm suitable for 25/45watt LED Street light, medium grade 1.2 mtr long made to shape with fixing clamps of MS flat 40x6mm nut bolts etc for security/street light all as specified and directed 42 S&Ffor earthing complete with galvanized iron earth plate electrode 600x600 x6.0mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected to GI strip of size 32X6mm as earthing lead by means of nuts, bolts, check nuts and washersof galvanized iron or steel all as shown on Electrical PlateNo 3 of SSR Part-I 2009, connected to earthingtest point all as specified or indicated including testing on completion. The quoted unit rate shall include the following elements as given below :-(a) Earth electrode as mentioned above (b) Main earthing lead of 32X6 mm GI strip from earth electrode to test point up to 7.5 mtrs. (c) Connecting earthing leadand electrodeall as specified and testing complete. (d) Adequate quantity of charcoal and salt(e) GI protection pipe of 40 mm dia lightgrade of length not less than5.00 mtrs. (f) Necessary excavation, earth work and PCCpit , angle iron 40x40x6mm frame including RCC cover. 43 All as per Srl Item No 40.00but earth lead galvanised iron wire of 4mm dia connected by means of GI nuts, bolts and washers, 15mm bore light grade GI protection pipe 44 M&Lfor repairing existing LT Panel doors of front , back and internal sheets complete with new locking arrangement complete all as specified and directed. Note:Any part/spare found defectivesuch as packing, nuts bolts,hinges & (welding machine works) etc shall be repaired/replacedwhich cost shall be deemed to be included in the unit rate quoted for this item. 45 M&Lfor preparing old painted surface of panel board by cleaning removing of old paint by scratching with wire brush / sand paper etc and including denting of broken / rusted surface and applied two coat of synthetic surface enamel paint by spray painting outside surface of panel as existing colour of panel all as specified and directed. 46 Exacavation for cables loops near the poles LT Panels/transformers, cutting the damages/burnt parts of cable and reconnecting its positions complete with thimbles, nut bolts, sleeves all as specified and directed by Engineer-in-Charge. 47 Taking out carefully manually by excavation of existing LT/HT cable with loops and relaying with DWC pipe/brick the same after repair of cutting the damages / burnt parts of cable and reconnecting its into originalpositions complete with cable joints all as specified and directed by Engineer-in-Charge.Note:-(i)HT/LT Cable Joint & DWC Pipe/Brick will bemeasured and paid sepearetly. (ii) Unit rate shall be included in excavation and returning filling. (iii) Handling of UG cable to working site as ordered shall be carried out by the firm and rate for the same shall deem to be included in the unit rate. 48 Supply and erectsteel tubular swaged poles complete with cast iron base plate, final taper plug, bolts nuts & screws as specified type 410 SP-31 ( 9 mtr long) erecting in position all as specified and as directed by Engr-in-ChargeNote: (i) Excavation Earth work and foundation will be measured and paid seperately under relevent items. 49 M & L in replacement cross arms bracings supports clamps and back plates fabricated from structural steel sections including nut bolts washers welding bending cold and hot drilling holes for bolts in any shape or size as indicate or directed and inclusive of one primer coat one under coat and one finishing coat of paint. 50 S & Fin replacement straight through joint heat shinkablesuitable for3 core 11000 volts XLPEUGcable of size 95 Sq mm to 120 Sq mm complete all as specified and directed. 51 S & Fin replacement End termination joint heat shrinkable of any size suitable for3 core 11000 volts XLPEUGcable of size 95 Sq mm to 120 Sq mm complete all as specified and directed. 52 Supply, fixingand testing and commissioing HMI211CUMMINSPCC 1302 main Board Cummins V2.0 (3.3) Boardcomplete with all accessories suitable for 250KVA Cummins DG Set ( Srl No. E-25776101, A-N13A040997) Complete all as specified and Directed. 53 S&F cummins Air Transfer Pipe Cat Part No.3918327complete with all accessoriessuitable for 250KVA Cummins DG Set ( Srl No. E-25776101, A-N13A040997) Complete all as specified and Directed. 54 S&F Turbo Charger HX40 complete with all accessoriessuitable for 250KVA Cummins DG Set( Srl No. E-25776101, A-N13A040997) Complete all as specified and Directed. 55 S&F RPM and Frequency controller assembly ( complete with all accessoriessuitable for 250KVA Greaves DG Set( Srl No. E-1326061604867, A-PEAG0261) Complete all as specified and Directed. 56 S&F in replacement heavy duty aluminium thimbleof size 185 to 240 sqmm complete all as specified 57 S&F in replacement heavy duty aluminium thimble of size 300 to 400 sqmm complete all as specified 58 S&F in replacement heavy duty aluminium thimble of size 50 to 120sqmm complete all as specified 59 S&F in replacement outdoor type Tiranga LED Rope light suitable for 9/11 mtr electric PCC/SteelPole decorative, Operting Voltage 140-270 Volts 240V AC Supply 50Hz supply connection from down side Jn box including driver and two run of 1.5 sqmm single core unarmoured wire from Junction boxcomplete all as specified and directed by Engr-in-Charge. 60 Material & labour for cleaning away all grass vegetation, scapling shrubs bushes under grouth roots and trees not exceding 30 cm grith and removing rubbish upto distance of 50 mtr out the periphery of area under cleaness complete all as specified and directed. 61 Supply and spraying anti vegetation chemical liquid of 1ltrs bottle mixed with water as per direction of Engr in charge .Make: Round Off 62 Taking out existing gravels/hardcore material from the bottom of substn/equipment completely for cleaning and spraying of anti grass chemical and screnning the hardcore material and refill the same at places complete all as specified and directed by Engr in charge. Note:- Anti Grass chemical and loose filling of aggregate for topping upwill be measured andpaid separetly respective item of BOQ. 63 M&L for providing 20mm broken stone aggregate including spreading and levelling complete all as specified and directed. 64 S&Fin replacement of lighting arrestor metal oxide type gap less hreavy duty single polesuitable forrated systemvoltage12 KV and working rated 9 KV normal discharge. 65 M&L for testing of faulty LT cable by using LTvoltage fault locating machine and finding the fault and to be repaired the same including all T&P as required on site complete all as directed. Note :- (a) Each job includes finding out the location of each fault in LT feeder. (b) Necessary excavation,returning filling and removal deemed included in this job.(c) LT straightJointandadditional LT cable if required it will be measured and paid separetlyunder respective item of this BOQ. 66 M&Lstraight through joint heats shinkable suitable forupto 50 sqmm LT3.5 core 1100 volts XLPE cable type complete all as specified and directed. 67 M&Lstraight through joint heats shinkable suitable for70 sqmm to120 sqmm LT3.5 core 1100 volts XLPE cable type complete all as specified and directed. 68 S&Fin replacement ofmale and female contacts ofgang operative switchmade out of brass and rated capacity 200 amps ,make matching withthe existing switchcomplete all as specified and directed . 69 S&F in replacement of copper ribbon suitable for 200 amps rated apacity gang operative switch, 45 CM long complete all as specified and directed . 70 M&Lfor PCC 1:4:8 type D-2 using 40mm graded broken stone aggregate as in mass concrete in foundation of poles complete all as soecified. 71 M&Lfor PCC 1:3:6 type C-1using 20mm graded broken stone aggregate as in mass concrete in foundation of stays complete all as soecified. 72 S&F in replacementISI mark aluminiumthimblessuitable for under ground LTcables of sizes 16/25 sqmm 73 All as per srl item No 70here-in-before but of size 35/50 Sqmm 74 All as per srl item No70 here-in-before but of size 70/95 Sqmm 75 Supply and laying GI steel tubing, 80 mm bore, light grade with all fittings, laid in trenches / under roads / along pole / wallfor protection ofCable / GI wire / GI strip etc complete all as specified and directed. 76 Labour for drilling hole under the road with the help of drilling machine without damaging the road horizontally for road crossing GI tubing of any size for cable protection complete all as specified and directed. 77 M&Lin replacement of LT fire resistant PVC self adhesive electrical insulaiontape high quality size minimum 18 mtr long x 1.8 CM width complete. 78 S&Fcapacity luminaires 150 watt LED >5700Kwith suitable bracket and nut bolt of new Flood light IP 66,Operating Voltage 140-270 Volts, PF (0.90),LED driver current > 850 mA,external Surge Voltage Protection,toughned class,indl LED with secondary lens incl making electric connection using two run of 1.5 sqmm single core unarmoured wire min length 1.5mtrcomplete all as specified and directed by Engr-in-Charge. 79 M&Lin replacement offire resistant PVC double side self adhesive compound tape for water proof electrical insulaion high quality size minimum width 9 inch complete all as specified. 80 S&F single core PVC insulated unshesthed cable copper conductor of size 2.5 sqmm multistranded drawing innon-metalic PVC rigid conduit complete all as specified and directed. (Note;- PVC Conduit will be Measureand paid seperatly as relevent item.) 81 S&FRigid non-metallic PVC conduit 25mm dia (Heavy duty)in concealed exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. including taking out old conduit complete all as specified and directed. 82 S&F MCB SPN 40Amps C Curve 25 KA with Sheet metal encloser, complete all as specified and directed. 83 S&F MCB Single Pole Neutral16/25Amps C Curve25 KA with Sheet metal encloser, complete all as specified and directed. 84 Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), including dismantling of UNSV brick work 85 Rendering 10 mm thickon fair faces of brick work or concrete surfaces, finished even and smoothon walls in cement mortar (1:6) 86 Thermoplastic polycarbonate cable junction boxhinged door type of size 200x160x 98 mm for 3 Phase and Nutralincoming cable, 87 S & F cable route indicator made out of 45 x 45 x 5 mm angle iron, 80 mm long embedded in PCC block of suitable size with moulded lettter HT CABLE or LT CABLEsuitably incribed on CI circular plate 8 mm thick 100 dia complete incl neccessary PCC 1:3:6, type C-2 (using 40 mm graded aggrregate)block of suitable size and neccessary earth work and excavation all as specified and directed. 88 M&Lfor road cutting, including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boudders/stones, WBM 7.5 cm thick coarse aggregate received from dismentling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work complete all as specified and directed. 89 Dismantling of interlocking cement concrete (any thickness/size), on floor fixed in cement mortar in single layer complete all as specifed and directed. 90 M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS- 15658-2006 of 60mm thickness , M-35 grade, with grey cement and pigment. Complete all as specified and directed. 91 All as per srl item No 87 above but except interlocking cement concrete tiles, (Any thickness/size) (old interlocking tiles obtained from srl items No 30, Complete all as specified and directed. 92 M & L 25 mm thick sand fillimg under floor/interlocking tiles etc Complete all as specified and directed. 93 Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing the rubbish to a distance exceeding 94 S&F PVC insulated sheathed service wiretwin core 04 Sqmm aluminium multi stranded conductor 1100 volts grade incl taking down old unserviceable one. 95 S&F PVC insulated sheathed service wiretwin core 06 Sqmm aluminium multistranded conductor 1100 volts grade incl taking down old unserviceable one. 96 S&F PVC insulated sheathed service wiretwin core 10 Sqmm aluminium multistranded conductor 1100 volts grade incl taking down old unserviceable one. 97 S&F PVC insulated sheathed service wiretwin core 16 Sqmm aluminium multistranded conductor 1100 volts grade incl taking down old unserviceable one. 98 Preparation of old painted surface of 9 Mtr. steel tubular poles above the top of PCC coping.Painting of pole from top of coping to a height of 1.5mtr with two coats of synthetic enamel paint in white and sky blue alternate strip and painting the rest portion of pole of (approx length 7 mtr)including painting of cross arms/clamps etc complete with two coats of synthetic enamel aluminium paintand to the entiresatisfaction of Engineer-in-Charge complete all as specified and directed 99 S & fix LT Cable End termination joining kitheat shrinkabale complete with jointing materials suitable for LT Armoured cableof size 10 to 35 Sqmm all as directed. 100 S & fix LT Cable End Termination joining kitheat shrinkabale complete with jointing materials suitable for LT Armoured cable 3.5 coreof size 50 to 95 Sqmm all as directed. 101 M&Lfor earth continuity conductor or main earthing lead using 4 mm dia galvanised iron or steel wire fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required including taking down old wirecomplete all as specified and directed by Engineer-in-Charge. 102 M&Lfor earth continuity conductor or main earthing lead using 25 x 4mm galvanised steel strip fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation, etc. as required including porcelain insulator saddle at the spacing nort exceeding 400mm including taking down old strip complete all as specified and directed by Engineer-in-Charge. 103 S&Fin replacement ofMCCB 630Amps 4 pole 50 KAwith adjustablethermal and fixed magnetic setting, complete all as specified and directed. 104 S&Fin replacement ofMCCB 350Amps 4 pole 36 KAwith adjustablethermal and fixed magnetic setting, complete all as specified and directed. 105 S&Fin replacement of MCCB 250Amps 4 pole 35 KA with Sheet metal encloser withadjustablethermal and fixed magnetic setting, complete all as specified and directed. 106 S&F in replacement of MCCB 160Amps 4 pole 36 KA with Sheet metal encloser withadjustablethermal and fixed magnetic setting,complete all as specified and directed. 107 S&Fin replacement ofMCCB 160Amps 4 pole 25 KA adjustablethermal and fixed magnetic setting, complete all as specified and directed. 108 S&Fin replacement ofMCCB 100Amps 4 pole 25 KA with Sheet metal encloser withadjustablethermal and fixed magnetic setting,complete all as specified and directed. 109 S&F in replacement of MCCB 100Amps 4 pole 25 KAadjustablethermal and fixed magnetic setting,complete all as specified and directed. 110 S&F in replacement of on load change over100 Amp 4 pole complete withwith Sheet metal encloser incl operating handle and dismantling/connection ofexisting cables complete as specified and directed by Engineer-in-Charge. 111 S&F in replacement of on load change over315 Amp 4 pole complete withwith Sheet metal encloser incl operating handle and dismantling/connection ofexisting cables complete as specified and directed by Engineer-in-Charge. 112 S&F in replacement of on load change over200 Amp 4 pole complete withwith Sheet metal encloser incl operating handle and dismantling/connection ofexisting cables complete as specified and directed by Engineer-in-Charge. 113 S&F in replacement of on load change over100 Amp 2 pole complete with Sheet metal encloser incl operating handle and dismantling/connection ofexisting cables complete as specified and directed by Engineer-in-Charge. 114 M & L for Preparation of old cement based painted surfaces of RCC pole 9 mtr by cleaning of depositedmaterials,and painting withone coat of exterior emulsion weather coat paint of approved make and colour above the top of PCC coping.Painting of pole from top of coping to a height of 1.5mtr with two coats of synthetic enamel paint in white and sky blue alternate strip complete all as specifiedand directed byEngineer-in-Charge 115 SCHEDULE A PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch A Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
Contract Date: Jan 23, 2026 Contract Value : ₹ 14.42 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Jammu And Kashmir View Result →
40.
Heavy Industries and Public Enterprises #8997246 Technical Bid
Package-Supply And Erection And Commissioning , A. Material Supply Total Lumpsum Price For Design, Manufacturing, Supply Of Grp Pipes, Fittings & Flanges ( Including Lamination Kits, Couplings, Jointing Tools And All Other Required Accessories ) As Per The Boq And Layout Defined In And As Per The Requirements Of Bhel Pe&Sd Specification: Py52329 R00. B. Execution At Site Total Lumpsum Price For Installation Of Grp Pipes, Fittings & Flanges At Site ( Lowering, Laying, Jointing, Hydro Testing & Supervision Of Civil Works ) For The Scope As Defined In And As Per The Requirements Of Bhel Pe&Sd Specification: Py52329 R00. Notes: 1. Bidder To Quote Strictly As Per Bhel’S Nit Requirements. 2. Bidder Shall Quote Only Total Lumpsum Price ( C ) . Individual Price Not To Be Quoted. Individual Lumpsum Prices For ( A ) & ( B ) Shall Be Derived By The Defined Factors ( A = 0.7Xc; B = 0.3Xc ) . 3. The Bid Evaluation Is On Overall L1 Basis. Each And Every Item Of The Package Shall Be Quoted By The Bidder. Partial Offers Will Not Be Considered For Evaluation And The Same Are Liable For Rejection. 4. Bidders To Quote Strictly As Per The Above Price Format. No Other Format Is Acceptable. Any Tampering / Modification / Change Of The Above Price Format Is Not Allowed And The Bidder’S Offer Is Liable For Rejection. 5. Bom Provided Is Estimated Bom Based On The Drawing Attached With The Specification. Bidder To Note That Their Scope Includes Supply Of All Items Required For Complete Erection And Hydro Testing Of Piping ( Other Than Those Mentioned As Free Supply By Bhel ) As Per Drawing Including Tools / Tackles. Bom Has Been Prepared On The Basis Of Terminal Points Shown In The Layout Drawing. Any Changes In Pipe Routing Between These Terminal Points Shall Be Borne By Bidder Without Any Cost Implication To Bhel. 6. The Price Quoted By The Bidder Shall Include The Basic Price, Packing, Freight, Insurance And All Other Charges Except Gst. Applicable Gst Shall Be Paid Extra. Bidder To Indicate Hsn Code And Applicable Gst Rate For Each Line Item. 7. All The Items Included In The Price Bid Format Shall Be Quoted As Per Tender Specification And Pre-Bid Clarifications, If Any. Responsibility Of Ensuring Correctness & Completeness Of Scope Of Supply As Per Specification Requirement Solely Lies With Bidder. 8. Bidder Shall Confirm Submission Of The Unpriced Bid As Part Of Their Technical Offer By Typing “Quoted” In The Above Format. 9. Separate Purchase Orders Will Be Issued For Scope Of Work Of This Tender As Follows: A. The Purchase Order For Supply Of Items ( Part-A ) Will Be Issued By Bhel-Pe&Sd Hyderabad. B. The Purchase Order For Execution At Site ( Part-B ) Will Be Issued By Bhel-Pe&Sd Hyderabad ( Or ) Bhel-Pssr ( Bhel’S Construction Management Division For This Project ) .
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 7
Tamil Nadu View Result →
41.
Drinking Water Supply and Sanitation #8899662 Technical Bid
Replacement Of 1000Mm Dia Grp Common Header Pipeline In 130M Length With 1000 Mm Dia 12Mm Thick Ms Pipe In Bhelupur Water Treatment Plant Varanasi Including Supply Of All Materials Labour T And P
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Uttar Pradesh View Result →
42.
Drinking Water Supply and Sanitation #8876228 Technical Bid
Replacement Of 1000Mm Dia Grp Common Header Pipeline In 75M Length With 1000 Mm Dia 12Mm Thick Ms Pipe In Bhelupur Water Treatment Plant Varanasi Including Supply Of All Materials Labour T And P
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Andhra Pradesh View Result →
Madhya Pradesh View Result →
45.
Power #8727930 Technical Bid
Laying Of 500Mm Ductile Iron Pipes For Ttro Water From Epl Road To Existing Grp Pipe Near Time Office
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Tamil Nadu View Result →
46.
Defence #8724029 Technical Bid
Tender For Short Refit Work Package 50T Tug Sahas-1 Short Refit Work Package:- General Service. Scaffolding ( With Material ) To Be Arranged For Survey Purpose For A Total Number Of 80 Days. Quote For Services. 2 Fire Sentries With Necessary Fire Fighting Equipment, To Fight Fire Are To Be Provisioned. Quote For Services. 3 Cleaning Of All Tanks And Provide Gas Free Certificate. The Vendor Is To Be Provide All Consumables Required For Cleaning. Repair Plating, Structures And Fittings Of Water Ballast Tank And Fresh Water Tank As Per Survey Report. Damaged Area To Be Blasted Up To Bare Metal And Recoated As Per Existing Paint Scheme. Quote For Services. 4 Degutting & Regutting – Removal And Refiting Of Panels ( Approx 30 Sqm ) And Pipes. Quote For Both Services And Material. 5 Carry Out Non-Destructive Testing For Bollards, Fairleads And Hull Structure Including Stiffening Members In The Vicinity. ( A ) Survey To Be Done In Presence Of Nsry / Fab Survey Teams And Survey Reports To Be Provided. ( B ) Requirement To Undertake Renewal Of Structures, Based On Survey Report, To Be Included In Sow. Quote For Services And Material. 6 Testing Of Wt Compartment. All Tanks, Cofferdams And Sea Tubes Which Have Been Repaired By Build-Up / Renewal Or Have Been Subjected To Hot Work Through Welding Of Pad Piece / Foundation On Any Of Their Boundaries, Are To Be Air Pressure Tested. The Pressure Applied Should Never Exceed That Which Corresponds To A Pressure Of 0.2 Kh / Cm2 ( 02 Mtr Of Water Or 0.2 Bars Or 2 1 / 2 Ibf / In2 ) . Ballast Tank - Qty 03 , Fuel Tank – Qty 05, Fw Tank – Qty 02, Misc Tank - 04. Clearance Of Areas, Subject To Apt Will Be Accorded By Nsry / Fab Survey Team. Quote For Services . 7 Mast And Riggings. ( A ) Examine Mast Structure, Whip Aerial Platforms And The Surrounding Structure On Deck, Eye Plates, Load Carrying Members, For Signs Of Corrosion. Examine Bolted, Riveted And Intermittent Welded Structure Connections For Signs Of Fracture. Portable And Semi Portable Fittings To Be Removed For Closer Examination Of Structure Underneath. Defect To Be Rectified And Paint To Be Restored. All Marks Of Corrosion And Rust Are To Be Removed. Requirement Of Paint And Other Consumables To Be Catered For By The Vendor. Quote For Services And Material. 8 ( A ) Test All Standing & Running Riggings Fitted On Mast Structure Along With Associated Fittings. Renew All Wire Ropes And Associated Fittings As Necessary. ( B ) Carry Out Load Testing Of All Deck Eye Plates ( Qty 14 ) , Bottle Screws ( Qty 14 ) And Provide Load Test Certificate. Damaged Eye Plates And Bottle Screws Are To Be Renewed By The Vendor, Together With Relevant Load Test Certificates / Guarantee / Warrantee. Quote For Services. 9 Steel Renewal. Any Requirement To Include Transportation Of Steel And Preparation Of The Plates, Including Shaping And Positioning At Location Has To Be Catered For By The Vendor.Quote For Services. 10 Funnel. Examine, Clean And Restore Paint Of Eye Plates And Surroundings Structure, Funnel Structure ( Internal And External ) . Portable Or Semi-Portable Fittings That Obscure Structure Are To Be Removed And To Be Recoated Before The Fittings Are Replaced. Requirement To Ensure That Damaged Areas Requiring Steel Renewal Together With Paint Renewal Will Have To Be Undertaken By The Vendor. Quote For Services And Material. 11 Accommodation And Office. Repair / Renewal Of Wooden Furniture And Wooden Fittings Including Table, Chairs And Wooden Cupboards In Compartment And Accommodation Spaces. Quote For Services And Material. 12 Repair / Renewal Of Bunks, Mess Lockers And Their Securing Arrangements. Lockers And Securing Arrangements That Are Beyond Repairs, Are To Be Replaced With Suitable Alternatives. Quote For Services And Material. 13 Repair / Renewal Of Defective Deck Covering And Renewal Of Deck Plates Underneath As Per Survey Report Of Yard. Deck Coverings Being Renewed, Should Be Those That Have Been Approved By Navy. Quote For Services And Material. 14 Anchor, Chain Cable And Cable Locker. Lay Out All Cables, Survey Cable And Shackles, Break, Clean And Grease All Joining Shackles, Strip And Grease Slip In Cable Locker. Re-Arrange Cable Length To Ensure Equality Of Wear. Re-Mark Cable Length. Examine Hull Associated Fittings. Examine All Spare Chain Cable And Fittings, Clean And Coat With Boiled Linseed Oil. Dismantle Anchor. Clean And Grease Trunion Pin And Housing. Grease To Be Used:- Lg-280 Patt.No. 0474 / 910-0502. Hydrojet Lasting Of The Anchor Chain Cable To Be Carried Out. The Machined Surfaces Of The Joints Of Lugless Joining Shackles Are To Be Examined For Corrosion And All Such Shackles Are To Be Stripped, Greased And Re-Assembled. The Anchor, Chain And Cable Locker To Be Restored To Factory Fit Functionality. Quote For Services And Material. 15 Machinery Spaces. Clean All Bilges Using Approved Chemical Method. Clean Out All Limber Holes And Drain Holes. Examine Structures Not Covered By Lagging, Paying Particular Attention To Position Where Water Is Likely To Accumulate, Junctions Of Longitudinal With Side Platings And Machinery Bearers With Bottom Plating, Horizontal Surfaces Such As Tank Tops, Horizontal Stiffeners And Structure Obscured By Cable Plating. Portable Fittings That Obscure Structure Are To Be Removed For Examination Of Structure Behind. Carry Out Surface Preparation In Accordance With No 53 / 16 And Recoat The Damage Paint. Disposal Of Sludge ( Approx 50 Tons ) To Be Catered For By The Vendor. Consumables For Cleaning Also To Be Catered For By Vendor. Paint Scheme Restoration In All Areas As Per Existing Navy Standards. Quote For Services And Material. 16 Check The Condition Of The Vibration Mounts. Clean And Apply Necol Lacquer. Spm Readings Of Equipment Will Need To Be Certified By Nsry / Engg / Ele Teams. Vibration Damping If Not Adequate, Will Need To Be Replaced By The Vendor After Grouping Of Mounts. Certification I.R.O The Same May Be Provided. Quote For Services And Material. 17 Renew Damaged / Perished Lagging At Various Places Using Pin Method. Renew Paint Scheme Of Affected Areas Before Renewal Of Lagging. All Consumables Are To Be Catered For By The Vendor. Quote For Services And Material. 18 Capstan ( Oem - Geeta Engg ) . All Structural And Functional Defects Pertaining To Motor And Capstan Assembly To Be Rectified By The Vendor By Repairs / Renewal. Requisite Fluids To Be Positioned For Lubrication. Motor Spm Values And Power Ratings For Safe Operation To Be Proved During Trials. Offer For Trials To Ss Post Completion. 19 Anchor Windlass ( Oem - Geeta Engg ) . All Structural And Functional Defects Pertaining To Motor And Capstan Assembly To Be Rectified By The Vendor By Repairs / Renewal. Requisite Fluids To Be Positioned For Lubrication. Motor Spm Values And Power Ratings For Safe Operation. Offer For Trials To Ss Post Completion. Quote For Services And Material / Spares. 20 Renewal Of Mushroom Head With Spindle And Valves. Renewal To Also Include Safety Nets / Fasteners As Per Requirement / Joints And Gaskets. Quote For Services And Material. 21 Sewage Treatment Plant ( Oem – M / S Eva Coy N40ce ) . ( A ) Functioning Of Level Switches Of V-1 Tank. Operate All The Valves Which Have Not Been Changed From A Set Position To Prevent Jamming. Carryout De-Sludging Of V-2 Tank By Back-Flushing Line. Clean The Seawater ‘Y’ Type Strainer At The Inlet To ‘Bookcell’. Check Macerator Pump Oil Level By Removing The Pipe Plug Located On Top Of The Pump Casing. Oil To Be Renewed. Vendor To Cater For Disposal Of 5 Ton Sludge Associated With Stp System. Overhauling Of System And Auxiliaries To Be Undertaken. Qc Coverage For Overhauling To Be Provided By Nsry / Qc Team. Ber Valves / Pipes / Joints And Fittings To Be Renewed. All Fluid Replenishment To Be Undertaken As Required. ( B ) Clean Air Supply Filter / Regulator Element In Solvent By Removing The Screws That Secure The Air Chamber To The Filter Body. Drain, Inspect & Clean The ‘Bookcell’. Remove Large Deposits Of Hard Material With Diluted Hydrochloric Acid. Post Completion Of Routines, Operate System And Inspect For Leaks And Proper Cell Amperage. ( C ) Inspect The Tightness Of Belt And Check Leakage From Gland Of Discharge Pump. Repack The Gland ( If Required ) . Quote For Services And Material / Spares. 22 Macerator Pump. Carry Out The Following :- ( A ) Check To Ensure There Are No Leakages From The Main Seals. Renew Drive End Bearing And Seals If Required. ( B ) Check And Ensure That The Impeller Rotates Freely With No Vibration. ( C ) Inspect And Tighten Nuts And Bolts As Necessary. ( D ) Check Overload Units Operating Correctly. ( E ) Check All Valves For Correct Operation. ( F ) Remove Drain Plugs Provided At Each End Of The Bracket Of The Electric Motor And Allow Any Accumulated Moisture To Drain Away And Replace Plugs. Note. Replacement Of The Pump Assembly To Be Undertaken By The Vendor, If The Discharge Rate Does Not Meet Oem Designed Standards. Quote For Services And Material / Spares. 23 Clean And Lubricate All Plug Cock Valves. Lubricate Valves In Fully Opened Or Fully Closed Position Only. Quote For Services And Material. 24 ( A ) Undertake Effluent Test From Nabl Accredited Lab And Check Compliance To Marpol Norms. ( B ) Carry Out In-Situ Calibration Of Fixed H2s Sensor. Certificate Of Calibration To Be Obtained From The Oem. Date Of Calibration And Next Due Date Should Be Clearly Indicated On The Certificate. ( C ) Sewage Pollution Prevention Certificate Valid For Duration Of Five Years From A State Authorised Accredited Agencies As Specified In Mepc 115 ( 51 ) And 227 ( 64 ) For The Ship Adopted On 01 Apr 04 As Per Regulation 5 Of Revised Annex Iv Of Marpol 73 / 78 ( Ncd 3930, Issue 3, Sep 16 Is Relevant ) . Quote For Services. 25 Towing Hook With Quick Release Mechanism ( Oem - M / S Nautiluis Eng & Construction Company ) . Carry Out Load Testing Of Towing Hook And Undertake Repairs. Job Involves Serviceability Of Release Line And Repairs. Replacement Of The Towing Hook With Quick Release Mechanism To Be Undertaken If Existing Unit Exceeds Service Life / Not Functioning As Per Design. Quote For Services And Material / Spares. 26 Grease Filters Inside Exhaust Trunking In Galleys To Be Cleaned And Preserved. Renew If Defective. Quote For Services And Material. 27 Doors - Water Tight And Non-Wt Doors. Check Clips, Hinges For Looseness And Wedge Pieces For Signs Of Wear. Examine Leather Washers, Toridal Sealing Rings And Rubber Sealing. Renew Worn Out Parts And Carry Out Chalk Test Of All Wt Doors. Quote For Services And Material. 28 Scuttles & Windows. Check Hinge Fitting, Toughened Glass And Glass Rails For Looseness And Sign Of Wear / Damage. Renew Worn Out Parts As Necessary. Windows – Qty 32, Scuttles – Qty 18. Quote For Services And Material. 29 Hatch And Manholes. Survey Hatch And Manholes Covers. Remove And Clean Hatch And Tumbler Hinges & Pins. Apply Grease. Deteriorated Hatches And Manhole Covers To Be Fabricated. Securing Fasteners Wherever Damaged To Be Renewed With Stainless Steel Fasteners As Per Recommendations Of Survey Team. Carry Out Chalk Test Of All Wt Hatches And Renew Worn Out Parts As Necessary. Quote For Services And Material. 30 Ladders. Repair The Ladders With Associated Footsteps. Structural Defects In The Ladder Assembly Other Than Steps Also To Be Catered.Quote For Services And Material. 31 Single Arm Boat Davit ( Oem - Hemant Engg ) . Overhauling Of Boat Davit Along With Motor Assembly. Offer For Trials To Ss Post Completion. Structural And Functional Defects Of The Single Arm Boat Davit To Be Rectified By Repairs / Renewal Of Components. Quote For Services And Material. 32 Survey Wire Rope, Spare Gear And Other Associated Lifting Gears. Renew As Necessary. Renewal Of Wire Ropes To Be Undertaken As Per Existing Naval Guidelines. Quote For Services And Material. 33 Carry Out Load Testing With Davit Fully Rigged Up. After Completion Of Load Test, Examine The Complete Davit Structure And Associated Lifting Gears For Flaws, Distortion, Defects Etc. Flaws Must Be Examined And Repairs To Be Undertaken, Followed By Retesting. Quote For Services And Material. 34 Water Accumulation Observed On Both Side Of Foxle. Scupper System To Be Re-Positioned For Clearance Of Water Accumulation. Painting In Areas Affected By Hot-Work / Steel Renewal To Be Restored By Vendor. Quote For Services And Material. 35 02 Bullwark Doors Damaged. Hinges Corroded. To Be Renewed. Mat – Ms. Quote For Services And Material. 36 Bullwark Damaged / Deformed At Various Location. To Be Repaired / Renewed. Mat – Ms. Quote For Services And Material. 37 ( A ) Rubber Fenders On Both Side Of Tug Found Damaged / Perished. Fenders To Be Renewed. Length- 50 Mtr. ( B ) Securing Fasteners For Fenders Found Perished / Corroded. To Be Manufactured As Per Sample And Fitted Back. Note. Deformation Of Base Structure / Strengthening Members On To Which The Fenders Are Secured Are To Be Surveyed And Deformations, If Any To Be Rectified By Hotwork / Steel Renewal. Quote For Services And Material. 38 Wooden Fenders Damaged In Port And Stbd Side. To Be Renewed. Job Involves Re-Fitment Of Fenders On Ship Side. Quote For Services And Material. 39 Natural Air Vent Of All Compartments Wire Mesh Broken, Air Vent Corroded, Flaps Rubber Beading Perished. Hinges And Butterfly Nuts Corroded. To Be Renewed. Quote For Services And Material. 40 Sounding Points Of Fresh Water Tank Threads Worn Out. To Be Repaired / Renewed. Quote For Services And Material. 41 Securing Bracket Of Fire Hose Box Corroded At Multiple Locations. To Be Renewed. Quote For Services And Material. 42 Lifebuoy With Self Igniting Light And Smoke Signal ( Mob Marker ) Quick Release Type To Be Renew On Bridge Deck. Quote For Service And Mat. 43 Fibre Sheet For Weather Deck Canopy Damaged. To Be Renewed. Quote For Services And Material. 44 Platform For Head Bollard Corroded / Damaged. To Be Repaired / Renewed. Quote For Services And Material. 45 Platform For Quarterdeck Bollard Corroded / Damaged. To Be Repaired / Renewed. Mat - Wood. Quote For Services And Material. 46 ( A ) Fisherman Plate Along With Securing Pin Corroded. To Be Manufactured As Per Existing Plate And Pin ( Qty 02 ) . ( B ) Bottle Screw For Anchor Chain Stopper Corroded. To Be Renewed ( Qty 02 ) . Quote For Services And Material. 47 Life Raft Stowing Brackets ( Qty 02 ) Along With Sliding Ladder Damaged / Corroded. To Be Repaired / Renewed And Operational. Job Involves Renewal Of Life Raft Securing Straps. Quote For Services And Material. 48 Serviceability Checks Of Life-Rafts ( Qty 02 ) And Hru ( Qty 02 ) By Nabl Accredited Agency. Webbing Of Life-Raft To Be Renewed, If Damaged Beyond Repair. Quote For Services And Material. 49 Covers ( Both Compressor Safety Mesh Cover And Control Panel Cover ) For 02 Ac Compressor Units On Upper Deck Damaged / Broken. To Be Manufactured. Mat - Al Plate. Quote For Services And Material. 50 15 Cm Ms Strip On Upper Deck Wt Doors Damaged / Corroded. To Be Manufactured And Welded In-Situ. Quote For Services And Material. 51 Internal Super Structure - Repair Works To Be Under Taken On Internal Hull Structure Including Bulkhead And Fittings As Per Survey Report. Painting To Be Under Taken Post Repairs. Quote For Services And Material. 52 Refrigerator On-Board Defective. To Be Repaired / Renewed. Quote For Services And Material. 53 01 Weather Deck Locker Damaged. To Be Repaired / Renewed. Quote For Services And Material. 54 Executive Chairs Fitted At Wheel House Observed To Be Damaged. To Be Renewed. Quote For Services And Material. 55 Engine Room Blower Wire Mesh And Securing Ms Strips Broken / Corroded. To Be Renewed. Quote For Services And Material. 56 Sunmica And Wooden Beading Of Dining Hall Table Broken / Damaged. To Be Repaired / Renewed. Quote For Services And Material. 57 Canvas Covers Of Following Deck Equipment Torn / Perished. To Be Renewed. Windlass, And Control Stand, Rescue Boat, Search Light ( Qty 02 ) , Magnetic Compass, Capstan And Capstan Control, Boat Davit Motor, Me And Da Exhaust And Intake. Quote For Services And Material. 58 Anchor Cleaning Sea Water Line Chocked / Damaged. To Be Repaired / Renewed. Quote For Services And Material. 59 Mob Stand ( Qty 04 ) And Bracket Damaged. To Be Renewed. Quote For Services And Material. 60 ( A ) Foundation Of Port And Stbd Search Light Found Deteriorated. Repair To Be Carried Out. ( B ) Rotating Mechanism Of Port And Stbd Search Lights To Be Renewed. Quote For Services And Material. 61 Hull Survey. Clean All Tank Tops, Bilges Of Machinery Spaces And Other Accessible Internal Surfaces Of Underwater Hull. Damaged Area To Be Blasted And Paint To Be Restored As Per Existing Paint Scheme. Quote For Services And Material. 62 Underwater Platings. ( A ) Remove Marine Fouling From The Hull Using Hydro Jet With Maximum Pressure Not Exceeding 3000 Psi. ( B ) Areas Where Breakdown Of Abrasive Anticorrosive Paints Observed, To Be Blasted And Recoated With Full Paint Scheme. ( C ) Paint Scheme On Full Underwater Hull And Boot Top Including Wind And Water Areas I.E. Area Up To 500Mm Above Boot Top Area Is To Be Restored. ( D ) Application Of One Coat Of A / F Paint On Underwater Hull And Boot Top Area To Be Carried Out Post Adequate Surface Preparation. Quote For Services And Material. 63 Draught Marks. Draught Marks To Be Painted With Paint Scheme As Under Water Area And Top Coat To Be Painted With White Paint. ( A ) Fwd ( B ) Midship & ( C ) Aft. Renew Defective Draught Marks. Quote For Services And Material. 64 Above Water Area ( Ship Side, Superstructure And Fittings, Davit, Windlass, Capstan ) . ( A ) Clean The Hull Using Hydro Jet With Maximum Pressure Not Exceeding 3000 Psi. Damaged Area To Be Blasted Up To Bare Metal. ( B ) Carry Out Painting Of Above Water Area With High Performance ( Hpp ) Advanced Hybrid Coating System For Above Water Area ( Ship Side & Superstructure ) As Per Paint Scheme Mentioned Below:- ( I ) 02 Coats Of Primer To Achieve 80 Microns Dft. ( Ii ) 02 Coats Of Ral 7040 Colour Specification To Achieve 80 Microns Thickness. ( Iii ) Total Dft - 320 Microns. Note. Navy Approved Paint To Be Used. Requirement Of Paint, Other Consumables And Staging To Be Catered For By The Vendor. Quote For Services And Material. 65 Life Saving Appliances. ( A ) Stretcher ( Qty 01 ) For Life Saving Damaged. To Be Renewed. Size - Standard. ( B ) First Aid Box Locker Damaged At Various Location. To Be Renew And Fitted On Specific Locations. ( Oem - M / S Godrej & Boyce Mfg Co Ltd. ) . ( C ) Life Jacket With Light And Whistle Damaged ( Qty 19 ) . To Be Renewed As Per ( Lsa Code Msc 207 ( 81 ) ) . Testing Of Life Jackets To Be Carried Out. Quote For Service And Material. 66 Water Filter Cum Purifier Defective / Damaged In Crew Dining Hall. To Be Renewed. Job Involves Fitment. Quote For Services And Material. 67 Following Defective Wc And Bathroom Accessories To Be Renewed. ( A ) Shower - 05, ( B ) Water Tap - 06, ( C ) Urinal With Full Fittings And Accessories - 03, ( D ) Commode With Full Fittings And Accessories - 04, ( E ) Two Way Basin / Sink - 04. Note. Defective Valves And Reducers, To Be Renewed. Quote For Services And Material. 68 Carryout Chemical Cleaning Of All Trunkings. Renew Perished / Damaged Trunkings On Upper Deck And Mess. Paint To Be Restored Post Repairs As Per Existing Paint Scheme ( Qty - 80 Sqm ) . Quote For Services And Material. 69 Hose Box Damaged / Broken At Various Location ( Qty 07 ) . Securing Brackets Corroded. To Be Manufactured And Refitted In-Situ. Mat - Grp. Quote For Services And Material. 70 Weather Deck & Bridge Top Deck Corroded / Undulation At Various Location. Hydro Blasting To Be Under Taken Prior Survey. Defects To Be Rectified As Per Survey Report Of Yard. ( A ) Aarea To Be Painted With High Performance Non- Skid Coating System For Weather Decks ( Hpp ) Paint Scheme As Mentioned Below Post Defect Rectification And Plate Renewal As Per Survey Report. ( B ) 07 Years Guarantee Paint Scheme Of Da Grey Colour To Be Used. ( C ) Navy Approved Paint Scheme To Be Used. ( D ) Paint Scheme Of Weather Deck And Platforms:- ( I ) 01 Coat Primer Coat - Dft 50 Microns. ( Ii ) 01Coat Anti Corrosive Intermediate Coat - Dft 200 Microns. ( Iii ) 01 Coat Non-Skid Top Coat - Dft - 800 Micron. ( Iv ) Total Dft - 1050 Microns. Note. Paint To Be Restored As Per Paint Scheme Post Repair And Inspection. Paint To Be Provided By Refitting Firm.Quote For Services And Material. 71 Combing Around Wheel House Deck Corroded / Damaged. To Be Repaired / Renewed In Situ. Mat - Ms Quote For Services And Material. 72 Panelling Damaged / Corroded At Various Location. To Be Renewed. Mat - Ss. Job Involves Removal Of Existing Panels And Fitment. Quote For Services And Material. 73 02 Mooring Rope Reel, 01 Towing Rope Reel And 01 Cable Reel Broken. To Be Manufactured And Replaced In-Situ. Job Involves Welding And Cutting Assistance And Fitment. Quote For Services And Material. 74 ( A ) Ships Name Box Along With Lighting Arrangement Defective. To Be Renewed. Mat - Ms ( Qty – 02 ) . ( B ) Ships Name Board On Port And Stbd Side To Be Renewed. Mat - Wood ( Qty – 02 ) . Quote For Services And Material. 75 Microtech Damaged At Various Location. Removal Of Old Microtech To Be Undertaken. Surface Preparation To Be Carried Out For Hull Survey. Defects To Be Rectified As Per Survey Report Of Yard. Microtech To Be Renewed Post Application Of Primer On Deck. Quote For Services And Material. 76 Dado Area In Wet Compartment Corroded / Damaged. To Be Repaired / Renewed. Job Involves Removing Of Gutting Degutting Of Panels. Quote For Services And Material. 77 Heavy Duty Tyre Fenders Of Barge Found Damaged. Renewal Of Fenders To Be Carried Out. Hot Work Required For Removal And Fitment Of Tyre Fenders To Be Carried Out ( Qty -20 ) With 60 Eye Pads And 16 Mm Galvanised Chain Along With D Shackle. Undertake Apt Of Hot Work Tanks If Any. New Heavy Duty Tyre Fenders To Be Provided By Firm. Quote For Services And Material. 78 Wire Mesh And Ball Valve Of Air Vent On Upper Decks Be Replaced If Required. Structural Defects On Air Vents To Be Repaired. Quote For Services And Material. 79 Strip, Clean And Overhaul Domestic Fresh Water System Valves, Stop Cock ( Qty 05 ) , Basin Beep Cock ( Pillar ) ( Qty 04 ) , Sink Beep Cock ( Pillar ) ( Qty 01 ) . Mat - Brass ( Chrome Plated ) . Quote For Services And Material. 80 ( A ) Ventilation Flaps Of All Compartments, Wire Mesh Broken, Air Vent Corroded, Flaps Rubber Beading Perished, Hinges And Butterfly Nuts Corroded, Ventilation Lowers Damaged / Corroded. To Be Renewed ( Qty 16 ) . ( B ) Punka Lowers Damaged At Various Trunkings. To Be Renewed And Fitted. Material To Be Provided By Firm ( Qty - 05 ) . Quote For Services And Material. 81 Cathodic Protection Sacrificial Anodes-Renew Sacrificial Anodes Fitted To Under Water Hull, Voith Blade, Rope Guard, Shaft Tunnel, Stern Tubes, Inlet And Outlets, Seachest, Biges And Cofferdams. 82 Enginering Dl: ( Port And Stbd Main Engine, Wartsilla, Model : 8L-26 2000H ) :- Carry Out 2000 Hourly Routine Of Main Engine :- ( A ) Check Engine Oil Leakage, Fixation Of Piping, Cables And Wring Rectify Leakage And Loose Cable Connection. N ( B ) Check Engine On Bolt Connection, Repair Loose Bolts. N ( C ) Check Engine Drain Points Of Charge Air Receiver And Possible Water. N ( D ) Check Oil Level, Charge Oil If Required. N ( E ) Check Foundation Bolt And Chocks. Repair If Required. N ( F ) Renew Fuel And Lub Oil Filter. N ( G ) Clean Centrifugal Filer. N ( H ) Drain Starting Air Vessels And Air Treatment Units. N ( J ) Servicebility Checks Of Ht And Lt Cooling Water. N ( K ) Clean Air Compressor By Water Injection. N ( L ) Inspect And Clean Air Filter To The Turbo Charger. N ( M ) Check Function Of By-Pass And Waste Gate Assembly. N ( N ) Lubricate Fuel Control Mechanism Linkage. N ( P ) Check If Alarm And Safety System Is On With Running Engine, Rectify If Not Working. N ( Q ) Check Function Of Measuring Devices, Calibrate If Not Working Properly. N ( R ) Check Function Of Oil Mist Detector, Calibrate If Not Working Properly. N ( S ) Check Operation Of Turning Gear And Start Inter Lock Device, Repair / Calibrate If Malfunctioning. N ( T ) Check / Adjust Valve Clearance. N ( U ) Main Engine Ups Control Panel Door Damaged. To Be Renewed. N ( V ) Main Engine Fresh Water Cerculating Pump No.1 Breaker Tripping Frequently. Defect To Be Rectified. N ( W ) Both Me Lcp Display Malfunctioning. To Be Renewed. N ( X ) Turbocharger Outlet Temperature Sensor Faulty, To Be Replaced ( Port Main Engine ) N ( Y ) Both Main Engine Starting Air Line Water Trap Valves To Be Overhauled N ( Z ) Both Pre-Heater To Be Dismantled, Mechanically Cleaned And Boxed Back. System To Be Pressure Tested And Proved For Operation Post Fitment Of Pre-Heater. Test Pr- 3 Kg / Cm2. N ( Aa ) Both Pre- Hetaer Circulating Pump Alongwith Motor To Be Overhauled N ( Ab ) Main Engine Expansion Tanks ( Qty - 03 ) To Be Cleaned And Paint To Be Restored As Per Paint Scheme. Respective Sight Glass ( Qty-01 ) To Be Renewed. N ( Ac ) Stbd Main Engine Rpm Not Exceeding Beyond 260 At Idle As Against 600 Rpm, Defect To Be Rectified ( M / S Wartsila Engine ) N ( Ad ) Fuel Injectors Of Both Main Engines To Be Calibrated ( M / S Wartsila Engine ) N ( Ae ) Governor Calibration Of Stbd Main Engine To Be Undertaken ( M / S Europe Actuatore ) N ( Af ) Excessive Lub Oil Consumption On Both Main Engine. Dr To Be Undertaken N N 83 ( Port And Stbd Da, M / S Cummins India Ltd, 3000H ) :- Carry Out 3000 Hourly Routine :- N ( A ) Remove Injectors. Clean, Inspect, Repair & Calibrate With New Spares. N ( B ) Remove Heat Exchanger. Clean & Pressure Test. N ( C ) Remove Turbocharger. Clean, Inspect & Repair With New Repair N Kit ( Check Turbocharger End Play And Radial Clearance ) Ntighten Nut & Cap Screw Of Air Inlet And Exhaust System. Ncheck Vibration Damper Visuallyrepair If Defective. N ( D ) Replace Belts And Accessories. N ( E ) Check All Cut-Out & Safety Controls. Renwe If Defective. N ( F ) Flush Cooling System With Restore Plus, Run Engine To Bring It To Operating Temperature. Stop The Engine Reflush Cooling System With Portable Water 2-3 Times. Refill Cooling System With Coolant. Run The Engine For Three To Five Minutes. N ( G ) Post Completion Of Routines, Start The Engine And Check All Gauges, Replace If Required, Check For Oil / Water Leakage, Exhaust Leakage, Stop The Engine And Recheck Engine Oil Level, Top Up If Required. After Necessary Inspection Restart The Engine. Run At Idle Speed For 15 Minutes; Carry Out Safety Device Checks. Undertake Full Load Trials On Completion. Post Complition Of Routine Carry Out Sdc Checks And Load Trails, Calibrate / Renw Defective Safety Divices. N ( H ) Da Control Panel Door Damaged. To Be Renewed. 84 Port And Stbd Voith Turbo Schneider, Model - 21 R 5 / 150-2:- Carry Out Docking Routines And 5000 Hourly Routines :- ( A ) Check The Screw Joint Renew If Dfective. N ( B ) Check For The Leakage From Blade Shaft Sealing, If There Any Keajage Rectify It. N ( C ) Check For The Leakage From Main Seal, Change Seal If Defective. N ( D ) Check Main Gear Toothing For Any Damage, Rpair It If Damaged. N ( E ) Check The Input Gear Rpair It If Damaged. N ( F ) Check For The Leakage From Mounting Gear. If There Is Any Leakage Rectify It. N ( H ) Check For Leakage From The Propeller Well. If There Is Any Keajage Rectified It. N ( J ) Check For Correct Fuctionnig Of Rotor Space Ventilation Repaired It If Defective. N ( K ) Renew Corrosin Protection. Note. Quote For Services And Material / Spares. N 85 Fuel And Lub Oil Centrifuge Make-Alfa Laval Pa 605:- Carry Out Five Yearly Routines On Fuel And Lub Oil Centrifuge :- ( A ) Clean And Inspect Inlet And Outlet Pipe Threads, Paring Disc, Housings And Frame Hood. Renewed Damaged / Defective Parts. N ( B ) Clean And Inspect Separator Bowl, Top Disc, Bowl Discs, Distributor, Nozzles In Bowl Body, Sliding Bowl Bottom, Discharge Mechanism, Threads On Bowl Hood And Bowl Body, Bowl Spindle Cone And Bowl Body Nave, Renewed Damaged / Defective Parts. N ( C ) Clean And Inspect Oil Mist Fan, Oil Pump, Water Tank, Bowl Spindle, Ball Bearing Housing, Indentations And Radial Bobble Of Bowl Spindle, Renewed Damaged / Defective Parts. N ( D ) Clean Oil Sump, Change Oil And Oil Filling Device. N ( E ) Clean And Inspect Friction Coupling, Renewed If Defective. N ( F ) Replace Electric Motor Bearing. N 86 Ows Make-Suyash, Modle-Sd0.5:- Carry Out Five Yearly Routines :- ( A ) Replace Coalesce. N ( B ) Replace Adsorber Elements. N ( C ) Replace Stuffing Box Packing. N ( D ) Check Stator And Rotor, Replace Worn Out Component. N ( E ) Replace Zinc Anode. N ( F ) Check Oil Level Of Pump Gear, Fill Up If Required. N ( G ) Open The Inspection Port Of The Oil Separator Housing, The Oil Separator Housing And The Adsorber Housing. Replace Worn Out Parts. N ( H ) Remove The Sludge And Clean Container. N ( I ) Check Seal And Piston Valves, Replace Damaged Seal And Components. N ( J ) Replace Sensor Electrode. N ( K ) Checks The Function Of Heater, If Defective Replace It. N ( L ) Shore Suuply Connection Box Damaged. Box To Be Renewed To Ensure Water Tight Integrity. N 87 Reciprocating Air Compressors Make Elgi ( Model Hp 10 300 ) :- Carry Out 1000 Houlry Routines Of Air Compressor :- ( A ) Change Oil. N ( B ) Observed Noise And Vibration. N ( C ) Check Fasteners, Renwed If Dfective. N ( D ) Check For Air Leakage, Rectify If There Any Air Leakage. N ( E ) Adjust Pressure Setting As Per Manual. N ( F ) Change Inlet Air Filter. N ( G ) Clean Breather Valve. N ( H ) Inspect Valves, Renewed If Defective. N ( I ) Check Nrv, Repaired If Defective. N ( J ) Check Cooler, Repaired If Defective. N 88 Co2 Fire Fighting System:- Carry Out Sr Yearly Routines On Co2 Fire Fighting System :- ( A ) Carry Out Survey Of Piping. Repair / Renew As Required. N ( B ) Calibrate Weighing Beam Scale ( Where Fitted ) . N ( C ) Check All Flexible Hoses For Cracks, Embrittlement And Sign Of Cracking. Renew Them After Assessing The Condition N ( D ) Overhaul Non-Return Valves And Safety Stop Valves ( Where Fitted ) . N ( E ) Remove And Inspect Cylinder Operating Heads. Test For Correct Functioning. N ( F ) Renew Bursting Discs Fitted In Pipe System ( Where Fitted ) . N ( G ) Weigh The Co2 Cylinder Using Beam Scale. If The Weight Falls Below 10% Of Initial Weight, Recharge The Cylinders. Maintain Record In Log Book. N ( H ) Admit Lp Air Into Ring Main Checking The System For ( J ) Leaks. Ensure That All The Discharge Pipes And Nozzles Are Clear. Calibrate Pressure Gauges Fitted In The System. N ( K ) Check Audio Visual Alarm Function, Limit Switches In Control Penal For Operation, Renewed If Defective . Note- Quote For Services And Material / Spares 89 Serviceability Checks Of Co2 Fire Fighting Control System To Be Undertaken And Repaired With Spares As Required. Note- Quote For Services And Material / Spares 90 Hinges To Be Provided On Chequred Plates Of Engine Room For Operating System Valves. Note- Quote For Services And Material / Spares 91 Sea Water Suction Strainers :- Remove Inspect, Clean And Paint With Epoxy Coating For Following Suction Strainers : Main Sea Chest, Bilge Suction And Da Suction. Renew If Required. Mat - Ss As Per Sample Note- Quote For Services And Material / Spares 92 System Pipelines :- Removal, Chemical Clean And Repair System Pipelines. Pressure Testing To 1.5Xworking Pressure ( Kg / Cm2 ) , Undertake Fitment Onboard And Prove For Satisfactory Performance :- Galvanised Steel ( A ) 100Mm 93 ( B ) 80Mm 94 ( C ) 65Mm 95 ( D ) 50Mm 96 Copper. ( A ) 40Mm 97 ( B ) 32Mm 98 ( C ) 25Mm 99 ( D ) 20Mm 100 ( E ) 18Mm 101 ( F ) 15Mm 102 Cu-Ni ( A ) 125Mm 103 ( B ) 100Mm 104 ( C ) 80Mm 105 ( E ) 65Mm 106 ( F ) 50Mm 107 ( G ) 40Mm 108 ( H ) 25Mm 109 System Pipelines :- Renew With End Fittings, Pressure Test To 1.5Xworking Pressure ( Kg / Cm2 ) , Fit Onboard And Prove. ( A ) Air Vent & Filling System, 150Mm 110 100Mm 111 65 Mm 112 50 Mm 113 Copper ( A ) Lub Oil & Sanitary System, 40Mm 114 32Mm 115 25Mm 116 20Mm 117 18Mm 118 15Mm 119 12Mm 120 Both Main Engine Fly Wheel Safety Guards Damaged. Guards To Be Manufactured. Note- Quote For Services And Material / Spares 121 Flap Cover Perished, To Be Renewed N ( A ) Stbd Main Engine Exhaust Funnel. N ( B ) Provision Of New Dd Compressure Exhaust Outlet Flap Cover Note- Quote For Services And Material / Spares 122 External Fire Fighting System Make-Jason Engg Ais, Modle-Sru-C255 Vk1.8Ccw-02 :- Port Fi Fi Clutch Lub Oil Cooler To Be Cleaned And Pressure Test To Be Carried Out. Serviceability Checks Of System To Be Undertaken Including Necessqary Spares. Note- Quote For Services And Material / Spares 123 Lub Oil Transfer Pump Make-Tushaco, Modle-R-20-Dg :- Pump To Be Overhauled View High Vibration. Note- Quote For Services And Material / Spares 124 External Fire Fighting System:- Actuator Of Nozzle Of Fifi System On Top Of Bridge Not Operating. Same To Be Repaired / Renewed Note- Quote For Services And Material / Spares 125 Following Defects On Fifi System N ( A ) Clutch Not Engaging In Remote Mode. Dr To Be Undertaken. N ( B ) Fifi System Pipe Line Cracked / Damaged At 08 N Locations. Leakages To Be Rectified And System To Be Pressure Tested. Dia- 300 Mm, Mat- Cu Ni N ( C ) Operating Wheels Of Fifi System Valves ( 08 Nos ) Damaged. Same To Be Renewed. N ( D ) Hydraulic Valves Of Fifi System To Be Overhauled With Spares, Size - 300Mm, Qty-02 Note- Quote For Services And Material / Spares 126 Pressure Regulating Valves N ( A ) Operating At High Pressure Than Normal ( 01 In No ) , To Be Overhauled ( Range- 30 To 5 Bar ) N ( B ) Prv Operating At High Pressure Than Normal ( 02 Nos ) , To Be Overhauled ( Range- 30 To 9 Bar ) Note- Quote For Services And Material / Spares 127 Both Ru Tank Sight Glass Damaged. To Be Renewed. Note- Quote For Services And Material / Spares 128 Overhaul Air Starting Motor Of Main Engine, Make Wartsila Note- Quote For Services And Material / Spares 129 Fresh Water System Filling Point At Weather Deck Perished Same To Be Renewed With Flanges ( Aprrox Length- 0.25 Mtr. Mat-Gun Metal, Dia-65 Mm Nnote- Quote For Services And Material / Spares 130 Repair / Renewal Of Hand Pump Fitted On Foxle Note- Quote For Services And Material / Spares 131 Following Oil Pressure Setting To Be Adjusted On Both Voith-: ( A ) Lub Oil Pressure ( B ) Control Oil Pressure , Rotor Oil Pressure. 132 Voith Turbo Schneider, Model - 21 R 5 / 150-2 :- Following Voith Parameter Not Showing In Mcr Alarm Monitor Panel:- ( A ) Control Oil Pressure, ( B ) Lub Oil Pressure, ( C ) Rotor Oil Pressure, ( D ) Bearing Oil Temperature. To Be Rectified. 133 Safety Device Checks To Be Undertaken On Both The Voith System 134 Air Starting Motor Of Port Main Engine Defective, To Be Repaired With Oem Listed Spares As Required . 135 Valves Of Various Systems :- Removal, Overhauling, Pressure Testing And Fitment Of Following System Valves:- ( A ) 65 Mm Sdnr Valve 136 ( B ) 65 Mm Sd Valve 137 ( C ) 80 Mm Gate Valve 138 ( D ) 80Mm Globe Valve 139 ( E ) 125 Mm Strom Valve 140 ( F ) 150 Mm Sdnr Valve 141 ( G ) 200 Mm Gate Valve 142 ( H ) 200 Mm Butter Fly Valve 143 ( J ) 300 Mm Butter Fly Valve 144 ( K ) 100 Mm Gate Valve 145 ( L ) 40 Mm Sdnr Valve 146 ( M ) 40 Mm Globe Sd Valve 147 ( N ) 40 Mm Sd Valve 148 ( O ) 32 Mm Sd Valve 149 ( P ) 15 Mm Sdnr Valve 150 ( Q ) 65 Mm Strom Valve 151 ( R ) 80 Mm Strom Valve 152 ( S ) 125 Mm Sdnr Valve 153 ( T ) 50 Mm Quick Shut Down Valve 154 ( U ) 50 Mm Sdnr Valve 155 ( V ) 20 Mm Sdnr Valve 156 ( W ) 25 Mm Quick Shut Down Valve 157 ( X ) 15 Mm Cock Valve 158 Remove, Dismantle, Chemically Clean, Assemble And Pressure Test To Required Pressure With Spares For The Following N ( A ) Lub Oil Heat Exchangers Of Both Main Engine N ( B ) Both Alfa Cooler To Be Insitu Dismantled, Nmechanically Cleaned And Boxed Back With New Gaskets. System To Be Pressure Tested And Proved For Operation Post Fitment Of Coolers. Test Pr- 3.5 Kg / Cm2. N ( C ) Existing Inlet And Outlet Pipe Of Both Alfa Coolers To Be Repaced With Cu-Ni Pipe. Length- 0.3 Mtr, Mat- Ss, Dia- 80 Mm N ( D ) Sea Water Inlet Pressure Guage Line Adaptor Of Both Alfa Cooler Damaged, To Be Renewed Note- Quote For Services And Material / Spares 159 Renewal Of Hot Lagging For Da And Main Engine Compartment Note- Quote For Services And Material / Spares 160 Temperature Gauges Of Various System Lines To Be Renewed. Note- Quote For Services And Material / Spares 161 Suction And Discharge Pressure Gauges Of Various System Lines To Be Renewed. Note- Quote For Services And Material / Spares 162 Overhauling Of Fire Hydrants To Be Carried Out.Note- Quote For Services And Material / Spares 163 Leakage Observed From Dirty Oil Pipe Flange. Brazing And Pressure Test To Be Carried Out. Mat-Cu Ni, Dia-50 Mm. Note- Quote For Services And Material / Spares 164 Leakage Observed From Fuel Filling Line In Engine Room. Pipe To Be Replaced. Dia-50 Mm. Lenght-0.5Mtr, Mat-Ms.Note- Quote For Services And Material / Spares 165 Port Main Engine Breather Line Cracked. Pipe To Be Renewed. Mat-Ms, Dia-85 Mm, Length-0.5 Mtr.Note- Quote For Services And Material / Spares 166 Both Da Lub Oil Temperature Increasing. Both Lub Oil Cooler To Be Cleaned And Pressure Tested.Note- Quote For Services And Material / Spares 167 Both Da Sea Water Pressure Line Perished. Line To Be Replaced. Dia-5 Mm. Lenght-10 Mtr, Mat-Copper. Note- Quote For Services And Material / Spares 168 Port Main Engine Speed Sensor No-St173 And Temperature Sensor Is Not Operational. Sensors To Be Replaced With New Sensor. Note- Quote For Services And Material / Spares 169 Lub Oil Leakage Observed From Turbo Charger Return Line. Defect To Be Rectified. 170 Fuel Centrifugal Filter Of Main Engine Defective. Fuel Centrifugal To Be Replaced. Note- Quote For Services And Material / Spares 171 Air And Co2 Bottles To Be Pressure Tested At 1.5 Times Of Working Pressure. 172 Electrical Dl:Clean Winding And Ventilation Ducts. Check Condition Of Winding Insulation Including End Connections And Renew Windings If Insulation Values Below 1 M Ohm. Check Stator Connection For Good Contact, Retighten Screws. Replace Earthing Terminals. Carry Out The Complete Overhaulling Of Excitation Panel And Replace Spares Required For Factory Designed Performance. Check For Healthiness Of Avr. Avr Tuning To Be Undertaken By Vendor If Required Based On Trial / Performance Reports. Vendor To Also Cater For Avr Replacement If Required. Load Trials To Prove Performance Of Alternator To Be Undertaken By The Vendor. Requisite Load Bank Also To Be Arranged By The Vendor. Quote For Services And Spares. 173 Navigation Control Panel To Be Overhauled And Repair Of Defective Lamps To Be Undertaken . Note- Quote For Services And Material / Spares 174 Repair Of Mb Sre Amplifier Unit To Be Carried Out 175 Emergency Lights With Assembly In Various Locations Defective. To Be Replaced With New Lights. Quote For Services And Spares. N 176 Fifi Monitor Remote Operation Non-Ops. Suspected Cable Damaged. Cable To Be Replaced And Rotary Switch To Be Renewed. Cable Specifications : 1 Sq Mm, 2 Core. Note- Quote For Services And Material / Spares 177 Carry Out Sr Routines Of All Transformers Fitted Onboard With Oem Recommended Components As Required:- ( A ) Using A Soft Brush And Vacuum Cleaner, Clean And Blow-Out Dust Nand Dirt From The Terminal Insulation Block, Between Lamination And Nthe Side And Bottom Ventilation Grills. N ( B ) Check Tightness Of All Connections And Earth Bonding Straps. Tight Loose Connections. N ( C ) Check All Lamination Securing Nuts For Tightness. Tight Loose Nuts. N ( D ) Examine Condition Of Insulation And Cable Spills For Sign Of Ncracking And Over-Heating. Change Low Insulations / Damaged Cable. N ( E ) Grease Threads Of Cover Securing Nuts And Bolts Using Anti-Seize Ngrease And Replace Covers. N ( F ) Examine Shock / Vibration Mountings, Renew If Required. N ( G ) Clean Out Using Soft Brush And Blower. N ( H ) Check All Connections And Terminal Screws Are Tight. N ( I ) Examine All Wiring For Signs Of Deterioration. Renewed Defective N ( J ) Examine Components For Over-Heating / Cracking And Capacitors Nfor Leakage. Renewed Defective Parts. N ( K ) Revarnishing Of The Coils To Be Undertaken Post Routines N N 178 Motors & Starters:- Carry Out Overhauling Of Following Motors And Starters ( Including Remote Operation ) . Motor Bearings To Be Replaced And Trials To Be Offered To Ship Staff. Rewinding Of The Motors To Be Undertaken If Insulation Values Below 1 M Ohm. Replacement Of Ber / Aber Motors To Be Undertaken As One To One Replacement. Vendor To Also Cater For Dismantling And Refitment Of The Motor. Equipment Performance To Be Restored To Factory Designed Condition. Replacement Of All Defective Parts To Be Catered By The Vendor. Note- Quote For Services And Material / Spares - ( A ) Fire & Gs P / P ( 7.5Kw ) 179 ( B ) Bilge Ballast Gs Pp ( 11Kw ) 180 ( C ) Fo Transfer Pump ( 0.75Kw ) 181 ( D ) Lo Transfer Pp ( 0.75Kw ) 182 ( E ) E / Room Supply Fan ( 7.5Kw ) 183 ( F ) Dirty Oil Pp ( 0.75Kw ) 184 ( G ) Lub Oil Cetrifuge ( 0.75Kw ) 185 ( H ) Voith Cooling Pp ( 3.7Kw ) 186 ( J ) Windlass Motor ( 5.6Kw ) 187 ( K ) Capstan Motor ( 7.5Kw ) 188 ( L ) O / Bilge Water Seperator ( 0.55Kw ) 189 ( M ) Boat Davit ( 7.5Kw ) 190 Lighting Circuit Cable And Switches ( 30 Nos ) At Various Locations Perished / Damaged. Cable / Switch Renewal To Be Undertaken. Cable Specifications 2.5 Sq Mm, 2 Core. 191 Rewinding Of 10Kva Lighting Transformers View Low Insulation Of Primary And Secondary Windings. Note- Quote For Services And Material / Spares 192 Sart Battery To Be Replaced And Instruments To Be Tested On Board. Battery Specification 12 V, 7 Ah. Note- Quote For Services And Material / Spares 193 Renewal Of 08 In No. Mob Fitted On Weather Deck, Type Lsa Code Msc 207 ( 81 ) . Note- Quote For Services And Material / Spares 194 Repair Of Navigational Lights Fitted On Main Mast Qty - 04 . Note- Quote For Services And Material / Spares 195 Replacement Of Test Equipments:- Multimeter Make- Fluke. 196 Tong Tester . Make- Fluke. 197 Analog Megger. Make- Fluke. 198 Replacement Of Battery And Hrg ( Hydrostatic Release Gear ) Of Epirb. Battery Specs - 12 V, 7 Ah.Note- Quote For Services And Material / Spares 199 Echo Sounder Calibration Including Fitting Of Hull Appendages To Be Undertaken. Printer Fitted In Wheel House Defective. To Be Replaced. Note- Quote For Services And Material / Spares 200 E / R Alarm Panel Display Monitor Not Working. To Be Replaced. 201 Split Ac Fitted In Wheel House Defective. To Be Repaired. Note- Quote For Services And Material / Spares 202 Control Batteries Of Da To Be Replaced. 12 V 120 Ah 203 Control Batteries Of Da To Be Replaced . 12 V 150 Ah 204 Control Batteries Of Da To Be Replaced . 12 V 180 Ah 205 Control Batteries Of Da To Be Replaced . 12 V 200 Ah 206 Tank Content Gauges ( Nivo System ) Not Working. Functional Checks All Gauges To Be Carried Out. Defective Components And Sensors To Be Replaced. Tank Level Calibration To Be Undertaken Thereafter. Display Module Serviceability Checks And Calibration To Be Undertaken. Replace If Ber / Defective. Quote For Services 207 Tubelight Fitted Onboard At Various Locations To Be Replaced With Led Tubelights . Note- Quote For Services And Material / Spares 208 Serviceability Of Magnetic Compass And Anemometer To Be Undertaken Followed By Calibration With Spares. Renew If Defective. Qoute For Services And Spares 209 Air Whistle Not Working. Overhauling And Repair To Be Undertaken With Oem Recommended Components As Required. Quote For Services And Spares 210 E / R General Calling Alarm Not Working. To Be Repaired 211 Spt Fitted Onboard At Various Locations Found Defective, To Be Replaced. 212 Window Wiper And Associated Mechanisms And Clear View In Wheel House Defective. To Be Renewed Including Spares. Quote For Services And Spares. 213 E / R Alarm Panel Display Key Board In Wheel House Not Working. To Be Repaired With Oem Recommended Components As Required. 214 03 In No Flood Light And 02 In No Search Light Not Working. To Be Replaced. Note- Quote For Services And Material / Spares 215 Port Main Engine Emergency Stop Push Button Is Defective At The Wheel House. To Be Replaced With New One. 216 Renewal Of Flood Lights Fitted In Engine Room With Led Lights. Note- Quote For Services And Material / Spares 217 Double Pole Switch With Single Way Are Defective. To Be Replaced With New One. Note- Quote For Services And Material / Spares 218 Deck Lights Guard / Fitting Are Broken. To Be Replaced With New One. Note- Quote For Services And Material / Spares 219 Repair Gps Display Unit Garmin With Oem Recommended Components As Required And Undertake Serviceability Checks. Note- Quote For Services And Material / Spares 220 Tru Batteries Not Holding Charge. To Be Replaced With New One 12V 180 Ah Maintenance Free Batteries . Note- Quote For Services And Material / Spares 221 Following Defective. To Be Repaired / Replaced N ( A ) Wall Mounted Fan Defective ( 20 Nos ) . N ( B ) Galley Hot Plate ( 02 Nos ) 222 5Kva Ups Defective. Batteries To Be Renewed. Battery Specification 12 V, 150 Ah ( 2 Nos ) 223 Deck Washing Machine Non Opertional To Be Renewed. Note- Quote For Services And Material / Spares 224 Lighting Switches Are Broken At Various Locations. To Be Replaced With Holder Assembly. Note- Quote For Services And Material / Spares 225 Serviceability Checks Of Navigational Radar Including Vswr And Power Output Checks. Replace Defective Transreceiver Pcb And Other Components As Necessary. Qoute For Services And Spares. 226 Hull Spares: Capstan Fixed Contacts. ( Ser No. 18 ) 227 Moving Contacts ( Ser No. 213 ) 228 Indicating Lamps ( Red ) . ( Ser No. 210 ) 229 Fuse Links ( Ser No. 206 ) 230 Controller Contacts ( Fixed ) ( Ser No. 190 ) 231 Controller Contacts ( Moved ) ( Ser No. 190 ) 232 Friction Lining For Disc Brake ( Ser No. 14 ) 233 Boat Davit Limit Switch ( Ser No. 31 ) 234 Fuse Elements ( 2A, 4A, 32A ) ( Ser No. 200 ) 235 Indicating Lamps ( Red ) ( Ser No. 206 ) 236 Push Button ( Green ) ( Ser No. 206 ) 237 Liner For Brake ( Ser No. 25 ) 238 Fuse For ( 1A, 2A, 4A, 10A, 16A, 32A ) ( Ser No. 178 ) 239 Master Controller Contact Kits ( Ser No. 177 ) 240 Contractor Kits ( Ser No. 174 ) 241 Lamps ( Ser No. 173 ) 242 Bearing For Motor ( Ser No. 179 ) 243 Friction Liner For Disc Brake ( Ser No. 14 ) 244 Gland Packing, Walker Remix ( P.No.Bba2522-879 ) ( Ser No. 26 ) 245 Indication Lamps ( Ser No. 21 ) 246 Mp Filter Hp0372a10an, Italy ( P. No. Hp0372a10an ) ( Ser No. 24 ) 247 Washer Od 100X1d 80 ( Ser No. 24 ) 248 Main Engine, Wartsilla, Model : 8L-26 Spares :- Fuel Filter ( 4761002 ) ( Ser No. 82 & 158 ) 249 Filter Paper ( 4713047 ) ( Ser No. 82 & 158 ) 250 Gasket ( 1072002 ) ( Ser No. 82 & 158 ) 251 Gasket ( 1072003 ) ( Ser No. 82 & 158 ) 252 O-Ring 20X3 ( 121007 ) ( Ser No. 82 & 158 ) 253 O-Ring ( 4712063 ) ( Ser No. 82 & 158 ) 254 Gasket ( 4712062 ) ( Ser No. 82 & 158 ) 255 Screw ( 218003 ) ( Ser No. 82 & 158 ) 256 Valve ( 2180049 ) ( Ser No. 82 & 158 ) 257 O-Ring ( 2180059 ) ( Ser No. 82 & 158 ) 258 Starting Air Pipe ( 2180063 ) ( Ser No. 82 & 158 ) 259 Sealing Ring ( 2180076 ) ( Ser No. 82 & 158 ) 260 O-Ring ( 2180077 ) ( Ser No. 82 & 158 ) 261 Washer ( 2180085 ) ( Ser No. 82 & 158 ) 262 Gasket ( 2180086 ) ( Ser No. 82 & 158 ) 263 Following Spares Main Diesel Alternator Model:6Cta8.3D / M ( Mandatory Spares ) :- Element Lub Oil ( Lube Oil Filter ) Make : Fleetguard ( 3401544 ) ( Ser No. 83 ) 264 Ring Compress ( 3919918 ) ( Ser No. 83 ) 265 Ring Compress ( 3922686 ) ( Ser No. 83 ) 266 Ring Retainer ( 3920692 ) ( Ser No. 83 ) 267 Ring, Oil Piston ( 3921919 ) ( Ser No. 83 ) 268 Regulator, Vol. Stamford Mx321, Eoo-23212 ( 2890759 ) ( Ser No. 83 ) 269 Rectifier ( 2890014 ) ( Ser No. 83 ) 270 Bearing, Main ( Thrust ) ( 3944153 ) ( Ser No. 83 ) 271 Bearing, Main ( Thrust ) ( 3944158 ) ( Ser No. 83 ) 272 Bearing Crank ( Thrust ) ( 3944163 ) ( Ser No. 83 ) 273 Valve, Intake ( 3924492 ) ( Ser No. 83 ) 274 Valve, Intake ( 3921444 ) ( Ser No. 83 ) 275 Collet, Valve ( 3901177 ) ( Ser No. 83 ) 276 Guide, Valve ( 3925863 ) ( Ser No. 83 ) 277 Injector ( 3926787 ) ( Ser No. 83 ) 278 Valve Spring ( 3991085 ) ( Ser No. 83 ) 279 Gasket, Exh. Ou; ( 3873509 ) ( Ser No. 83 ) 280 Valve Insert ( 3970278 ) ( Ser No. 83 ) 281 Bearing Connection ( 3901430 ) ( Ser No. 83 ) 282 Piston Pin ( 3934046 ) ( Ser No. 83 ) 283 Fuel Filter ( 3931063 ) ( Ser No. 83 ) 284 Valve Insert ( 3908830 ) ( Ser No. 83 ) 285 Element Air Cleaner ( 3814313 ) ( Ser No. 83 ) 286 Element Air Cleaner ( 3814312 ) ( Ser No. 83 ) 287 Gasket Set ( Gasket Turbo ) ( 3755843 ) ( Ser No. 83 ) 288 Belt V Ribbed ( 3289124 ) ( Ser No. 83 ) 289 Seal, Valve St ( 3927642 ) ( Ser No. 83 ) 290 Bolt, Connection ( 3928870 ) ( Ser No. 83 ) 291 Nut Connection ( 3934864 ) ( Ser No. 83 ) 292 Pump Fuel Injector ( 5263870 ) ( Ser No. 83 ) 293 Tube Injector ( 5271935 ) ( Ser No. 83 ) 294 Sensors, Pr. ( 2 To 10 Bar ) ( 4911882 ) ( Ser No. 83 ) 295 Sensors ( Temperature ) ( 4911877 ) ( Ser No. 83 ) 296 Pump, Sea Water ( 4963510 ) ( Ser No. 83 ) 297 Seal Oil ( 3942535 ) ( Ser No. 83 ) 298 Seal Oil ( 5259499 ) ( Ser No. 83 ) 299 Seal Injector ( 3909886 ) ( Ser No. 83 ) 300 Gasket Exhaust ( 3932063 ) ( Ser No. 83 ) 301 Gasket Gear , H ( 3944293 ) ( Ser No. 83 ) 302 Gasket Cover ( 3939258 ) ( Ser No. 83 ) 303 Gasket Hydraulic ( 3940245 ) ( Ser No. 83 ) 304 Gasket Cylinder ( 3938267 ) ( Ser No. 83 ) 305 Washers Lock ( 611 ) ( Ser No. 83 ) 306 Screw Hex, Flange ( 3243948 ) ( Ser No. 83 ) 307 Plug Pipe ( S911b ) ( Ser No. 83 ) 308 Hardness Wiring ( 3875359 ) ( Ser No. 83 ) 309 Control Governor ( 3974704 ) ( Ser No. 83 ) 310 Washer Plain ( 640 ) ( Ser No. 83 ) 311 Nut Heavy Hex ( 204 ) ( Ser No. 83 ) 312 Screw Haxagon ( 112C ) ( Ser No. 83 ) 313 Washers Plain ( S602 ) ( Ser No. 83 ) 314 Washers Lock ( 604 ) ( Ser No. 83 ) 315 Clamp Hose ( 43828 ) ( Ser No. 83 ) 316 Brace, Tube ( 101470 ) ( Ser No. 83 ) 317 Clip ( 107460 ) ( Ser No. 83 ) 318 Screw Hexagon ( 109 ) ( Ser No. 83 ) 319 Connection Ex ( 3814793 ) ( Ser No. 83 ) 320 Flange, Weld ( 3226087 ) ( Ser No. 83 ) 321 Clip ( 500694 ) ( Ser No. 83 ) 322 Screw Hexagon 112C ) ( Ser No. 83 ) 323 Screw Hexagon ( 1137 ) ( Ser No. 83 ) 324 Nut Hex Heavy ( 204 ) ( Ser No. 83 ) 325 Nut Hex Heavy ( 203 ) ( Ser No. 83 ) 326 Washers Lock ( 604 ) ( Ser No. 83 ) 327 Washers Lock ( 611 ) ( Ser No. 83 ) 328 Washers Plain ( 640 ) ( Ser No. 83 ) 329 Gasket Exhaust Ou 2880039 ) ( Ser No. 83 ) 330 Gasket Dia 135 Pcd 115 Dia ( 3940245 ) ( Ser No. 83 ) 331 Washer Plain ( 640 ) ( Ser No. 83 ) 332 Connection Se ( 2867840 ) ( Ser No. 83 ) 333 Connection Se ( 2867838 ) ( Ser No. 83 ) 334 Tools :-½ Breaker Bar-15’’ Long ( Ser No. 83 ) 335 Procurement Of Following Spares Of Voith Turbo Schneider Propulsion Type Vsp 28R5 / 234-2Ae45 Kw Rpm ( Mandatory Spares ) :- Shaft Seal Ring Adck-300X340x16 ( H01.067195 ) ( Ser No. 84 ) 336 Round Cord Ring V-420X4.5Nbr70 ( H01.086366 ) ( Ser No. 84 ) 337 O - Ring 560X5 Nbr70 ( H01.032840 ) ( Ser No. 84 ) 338 O- Ring 454X8 Nbr 70 ( H01.064102 ) ( Ser No. 84 ) 339 Bulb Lamp 35X18.5-24V 5W ( H01.095322 ) ( Ser No. 84 ) 340 Filter Element Hydac 12782361300R020 ( H01.016221 ) ( Ser No. 84 ) 341 Repair Kit ( H01.012435 ) ( Ser No. 84 ) 342 Alfa Laval Fuel Oil Centrifuge:- Major Service Kit - 546670-07-08 343 Ows Make-Suyash, Modle-Sd0.5:- Cover Gasket ( 8320025002 ) ( Ser No 86 ) 344 Coaleser Element ( 2704002501 ) ( Ser No 86 ) 345 Sacrificial Anode ( 6453020001 ) ( Ser No 86 ) 346 Set Stuffing Box-Packing ( 546040207Ep1 ) ( Ser No 86 ) 347 Desicator Cartridge ( 51110Em027 ) ( Ser No 86 ) 348 Reciprocating Air Compressors Make Elgi ( Model Hp 10 300 ) :- V Belt ( 000905283 ) ( Ser No 87 ) 349 Inlet Air Filter ( 022100929 ) ( Ser No 87 ) 350 Gasket Free End Civer ( 020365450 ) ( Ser No 87 ) 351 Gasket Fly End ( 000425510 ) ( Ser No 87 ) 352 Gasket Valve Flate ( 000411530 ) ( Ser No 87 ) 353 Valve Finger Type ( 0003300950 ) ( Ser No 87 ) 354 Valve Finger Type ( 000330970 ) ( Ser No 87 ) 355 Gasket ( 0001004A ) ( Ser No 87 ) 356 Anchor Windlass:- Packing For Top Cover ( 02211-6235-1015 ) ( Ser No. 19 ) 357 Friction Lining For Slipping Clutch ( 02-18-6232-Sc-875240 ) ( Ser No. 19 ) 358 Spring For Slipping Clutch ( 02-18-6232-Sc-875270 ) ( Ser No. 19 ) 359 Rivets For Friction Lining ( 02-18-6232-Sc-875 ) ( Ser No. 19 ) 360 Friction Lining For Emb ( B-Emb-2451-B-3024 ) ( Ser No. 19 ) 361 Rivets For Friction Lining ( A-Emb-1900-180-3092 ) ( Ser No. 19 ) 362 Spring For Emb ( B-Emb-2451-B-3017 ) ( Ser No. 19 ) 363 Procurement Of Following Maintenance Free Lead Acid Batteries ( A ) 120 Ah - 12 Nos ( Ser No. 19 ) 364 ( B ) 150 Ah - 12 Nos ( Ser No. 19 ) 365 ( C ) 180 Ah - 12 Nos ( Ser No. 19 ) 366 ( D ) 200 Ah - 10 Nos ( Ser No. 19 ) 367 Fuse ( 0219-6232-9000-F1-F10 ) ( Ser No. 19 ) 368 Indication Lamp ( 02-19-6232-9000-H1-H2 ) ( Ser No. 19 ) 369 Service Charge For Third Party Inspection ( For Hull Survey And Qc )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Karnataka View Result →
47.
Tourism #8521150 AOC
Tender For Construction Of Shri Khema Baba Panorama, Baytu, Balotra (Raj.) - Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils 2 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). 3 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix. 4 Add extra for providing richer mixes respectively at all floor levelsProviding M-25 grade concrete by usingcement as per codal provision instead ofM-20 grade design mix. 5 Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M20 grade Nominal Mix / Design Mix 6 Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcementfor Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix 7 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 8 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Columns, pillars, posts and struts etc. 9 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 10 Add extra for additional height in centring, shutteringwhere ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at alllevels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan are is to be measured) 11 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) 12 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 13 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 14 Random rubble dry stone Kharanja (soling) under floor. 15 Carriage of MaterialsBuilding Rubbish Stone metal (Grit and ballast etc.)For 10 Km. 16 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr. : All kinds of soil 17 Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in :Cement Mortar 1:5 ( 1-Cement : 5-Sand). Wall upto 30cm. and less thickness. 18 Half brick masonry in Superstructure , above plinth level upto floor Vlevelusing bricks of designation 75 : Cement mortar 1 : 4 (1 cement : 4 coarse sand) 19 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :25mm thick. 20 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joint etc. complete fine finish :20mm thick. 21 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) 22 Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth completeNew Plastered Surface (three or more coats) 23 Kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 24 Providing & laying Chequered terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed wit pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28mm thick bed of C.M. 1:4 :. Medium shade using approximately 50% white cement and 50% ordinary cement. 25 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Jalore (P-white / S-white/ Rosy Pink colour).Above 3601 Cm2 Slabs 26 Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Marble work Full Edge moulding 27 P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. size600 mm X 1200 mm 28 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 29 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure A:.35 mm thick .Decorative teak veneer both side 30 Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. 31 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester mattconsisting of a coat of bitumen primer for bitumen membran @ 0.40 Itr/sq.mt. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane.3 mm thick 32 Grading roof for water proofing treatment withwater proffing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 33 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 34 Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mmand 10 mm thick as per approved design 35 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 36 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:. Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 37 Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred weldedand grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C Cblock 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to framefor paitam fixing float glass 4mm thickpanes with glazing clips and metal sash putty andfixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge 38 Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applyinga coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile B 39 Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Grade 304 40 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 41 Supplying and fixing 7 to 8 cm thick soorsagar stone chajja in slope (3 lines fine dressed)including cutting & moulding weather dripped (both sides dressed) 42 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & itsISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR, Medium point (up to 6 mtr.) 43 Long point(up to 10 mtr..) 44 Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & its ISI marked (IS:3419-1988)accessories, Hot Dipped GalvanizedModular box of 1.2 mm thick with earth terminal, 10 A modularswitch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR, On board 45 Long point(up to 10 mtr..) 46 Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure A attached with this BSR 47 S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR. 25 mm 48 32 mm 49 20 mm 50 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR 2 x 2.5 sq. mm. + 1x1.5sqmm 51 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 52 4 x 6.0 sq.mm(Panel To DB) 53 4 x 10.0 sq.mm(Panel To DB) 54 Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure A attached with this BSR 5 step fan regulator 2 Module 360 dgree rotating 55 Providing & Fixing of modular type lockable feature socket dulymade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 25 Amp. 2 Module Socket 56 Providing & Fixing offollowing size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 4 Module 57 Providing & Fixing ofWiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 4/5 Module 58 RJ-11 telephone jack singleline 59 Providing & Fixing offollowing size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .1/2 Module 60 Providing & Fixing ofWiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 1-2 Module 61 Supplying and drawing PE Insulated & PVC Sheathed unarmoured telephone cable with 0.5 mm dia. Solid Annealed electrolytic grade bare Copper Conductor as per IS: 8130/84 &confirming to TEC specification GR / WIR/06-03 March 2002in existingsurface or recessed conduit/casing capping. including ferruling on each pair for Identification etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 2 pair 62 10 pair 63 P & F Krone module with base framein the recess / surface made out of 1.2 mm thicksheet steel box, front openable, having locking arrangements duly powder painted,including dressing, ferrulingandpunchingof telephone cable with krone tool etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 10 Pairs 64 Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR. Metal door (Three phase) Per phase isolation, Horizontal IK-09 and IP-43 with Metal end box. 6 Way (Incomer 8,Sub Incomer2+2+2) 65 12 Way(Incomer 8,Sub Incomer2+2+2) 66 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating 67 Four pole MCB (With B/C curve tripping Characteristics) 50/63 A rating 68 Providing & Fixing of 240/415 V factory fitted RCBO with overload, short-circuit and earth leakage protectionwith ISI marked (IS12640-2)/ conforming to IEC 61009-1, breaking capacity 10 KA,provision for pad lock, min. Electrical operation 10,000 upto 63 A rating , minimum phase termination capacity of 35sq.mm. , IP 20 contact protection with existing distribution board / sheetincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR Two pole 100/300mA sensitivity 6A-32 A rating 69 40 A rating 70 Providing & Fixing ofBEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanConforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 ) 71 P & F 1.2mm thickM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure A attached with this BSR 72 Providing & Fixing ofof Double ball bearing, copper wounded capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor ,making connections, testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 225 mm sweep 73 Providing & Fixing ofISI marked (IS:371) 6 amp surface type 3 pin ceiling rose with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screws including making connection testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 74 Providing & Fixing of ISI marked (IS:1258) batten/angle lampholder with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screwsincluding making connection testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 75 Providing & Fixing of IP20 SMD Mid Power LED batten with integratedbox (min.1200mmx40mmx60mm including reflector) with replacable driverfixture made from Powder coated Extruded aluminiumhousing ,Min. lumen output 4400 lm,System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 4.0 KV with Short & Open circuit protection,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 76 Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / SqaureSMD Mid Power LED Downlight with power coated die-cast aluminum housingwith UV Stabilized non yellowish Diffuser withBIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products / work, refer Annexure A attached with this BSR . Surface Mounting (with extruded alumn. Housing ). Minimum lumen output 1950 lm 77 Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulbin existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI >70,minimum life time of minimum25000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer Annexure A attacheded with this BSR. 18/20 Watt 78 SITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel as specifications andOther parameters requiredas per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:- (a)Thickness of CRCA sheet shallbe 2.0 mm,cable alley compartments having concealed hinged type doors with key type lock with / withoutdetachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided (b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting,pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both side of panel.The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire. [c)Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar(>63 amp ) . control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only.All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. ( Cost of Bus bar/ Flexible wire for Interconnection between Main busbar and Switchgearis to be Paid Extra ) (d)Wiring between components within switchgear and Incoming / outgoing cableshall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging. (f)Floor mounted panel shall be mounted on Base frame of ISMCchannel size 100 x 50 x 5 mm( to be paid Extra ) (g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out. 79 Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar by means of SMC / DMC type insulatorwith standard short circuit withstand capacity, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Electrolytic grade Aluminium bus bar 6010 grade 80 Providing & Fixing of110/220 V, unibody LED Indicatinglamp IEC 60947with integral circuit, IP 65 above panel &IP 20 terminal block, Approx. body dia for panel not less then 20 mm, length min. 50mm, front LED cover dia min.29 mm, contact material phospher bronze for Led, PCB contacts shall be ofbrass (tin plated), impulsedielectric tested for 2.5 KV, Rated insulation resistance shall be 100 M ohm at 500VDCincluding connection etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Red/yellow/Green colour 81 Blue colour 82 Providing & Fixing of IS: 13875 & IEC :61326 confirming LED Digital type(up to 500) V range Volt meter / Direct- Ammeter /CT oertated ammeter/ Frequency meter / KWH meter / Multi Function Meter / Power analyzer of class 1 accuracyas per IS : 1248 of size 96mm x 96 mm including making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Three phase with universal Auxiliary supply + AMP + HZ + PF + KW + KVA + KVAR + KVARH + KWH + DUAL ENERGY+ ENERGY+THD-I, THD-V & RUN HRS + MD with RS485 83 Providing & Fixing of Electricalinsulating rubber matts as per PWD specification for electrical Works, ISI marked confirming to IS: 15652 /2006with one sideanti skid abberation marks and pasting the mat with synthetic rubber adhesive as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 11 KV,Class B 2.5 mm thick with proof voltage 22 KV AC (rms) and Break Down Voltage45 KV AC (rms) 84 Providing & Fixing of IS: 13875 & IEC :61326 confirming LED Digital type(up to 500) V range Volt meter / Direct- Ammeter /CT oertated ammeter/ Frequency meter / KWH meter / Multi Function Meter / Power analyzer of class 1 accuracyas per IS : 1248 of size 96mm x 96 mm including making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Three phase Ammeterwith Inbuilt Selector Switch 85 Three phase Voltmeter with Inbuilt Selector Switch 86 Providing & Fixing of selector switch of 10 A for voltmeterusing high grade engineering materialto international standards with cam assemblyinsulation of glass filled polyamide with high tracking index. For reliable and stable electrical and mechanical endurance double butt contacts with silver bi-metal on copper should provided . contact assembly is of operating temp range -25 degree C to 55 degree C, frequency upto 10 KHz. switch life under std. op. conditions shall be mechanically minimum 50000 operations @300 cycles/ hour and electrically 10,000 operations at 100% rated duty for 100 cycles/ hour including making connection etc.as required . All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Voltage Between Phases with OFF ( 4 Position ) 87 Providing & Fixing of CT linked selector switch of 10 AforAmpere meter (4 position )using high grade engineering materialto international standards with cam assemblyinsulation of glass filled polyamide with high tracking index. For reliable and stable electrical and mechanical endurance double butt contacts with silver bi-metal on copper should provided . contact assembly is of operating temp range -25 degree C to 55 degree C, frequency upto 10 KHz. switch life under std. op. conditions shall be mechanically minimum 50000 operations @300 cycles/ hour and electrically 10,000 operations at 100% rated duty for 100 cycles/ hour , including making connection etc.as required .All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 88 SITC of3 /4pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator,line load interchangeability,designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree,pollution degree 3, having positive isolation capability, push(test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage690 V.provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.OEM shall have submitNABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR 3 pole MCCB With Thermal Magnetic release 160 Amp , 25 kA, adjustable O/L & adjustable S/C setting, 89 4 pole MCCB With Thermal Magnetic release. 160 Amp , 25 kA, adjustable O/L & adjustable S/C setting, 90 up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C setting, 91 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR Four pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating 92 50/63 A rating 93 Providing & Fixing of 110 - 240 V, AC, 1 ph. , 2 W Astronomical time switch with surge suppressor, memory card, Sunrise / Sunset selectable, software for programming including making connection, etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 94 Providing & Fixing ofAC operated heavy duty 230 /440 Volt power contactor as per PWD specification for electrical Works, ISI marked IS/IEC 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, Din rail mounting type including making connections, testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 4 pole Power contactorswith following AC 1 Rating 25/32 Amp. 95 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) includingtesting etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure A attached with this BSR 4.0 Sq. mm 4 core 96 6.0 Sq. mm 4 core 97 25.0 Sq.mm3.5 core 98 150.0 Sq. mm 3.5 core 99 Supplying and making one end termination with Nickel plated heavy duty brass single compression gland (as per IS 12943-1990)) SIBG type consisting of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring,Compression Nut, heavy duty Copper lugs (IS 8337- 1976) duly crimped with crimping tool, PVC tapefor following size of PVC insulated & PVC sheathed/ XLPE copper conductor cable of 1100 volt grade as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR .4 x 4.0 sq.mm 100 4 x 6.0 sq.mm 101 4 x 25.0 sq.mm 102 Supplying and making one end termination with Nickel plated heavy duty brass single compression gland (as per IS 12943-1990)) SIBG type consisting of Check Nut, Gland Body, Metal Washer(3 Nos.), Outer Seal Rubber Ring,Compression Nut,heavy duty aluminium lugs (as per IS 8309 -1993) duly crimped with crimping tool, PVC tape as perIS 8337-1976offollowing size ofPVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 3.5 x 150.0 sq.mm 103 Providing and laying Non Pressure NP-3 classR.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) etc. as required. (Excavation of Earth& Back filling with compaction is to be Paid Extra). All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 200 mm Dia. 104 Supplyandinstallationofhigh tensile low carbon steel rod molecularly bonded with 99.9 % Copperthickness (250 microns) andconfirming toUL 467, IS/IEC 62561-2of following size and length and as per point mentioned (a), (b), [c), (d), (e) below :-(a) Bore a hole of dia. 100 mm of required length, Place the rod in the centre of Hole(b)filled with anti corrosiveconductivecompounds with the permanent sealings at both the ends, CPRI/ ERDAtested with RMS capacity of minimum 30 KA for withstanding 1 second .To ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 Kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. The compound shall be tested form NABL acredeated labfor lowresistivity ( less than 0.12 Ohm - meter ) & high conductivity in nature with carbon as a major contentas per referance of IS 3043-1987,IEEE 80-2013 (clause 14.5d) , IEEE 837 & IER 1956 with latest amendemnts © Connect the rod with copper Strip/Conductor/Wire with suitable clamp made from tinned copper and SS 304 Bolt (d) Place Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height250 to 300 mm. (d)Testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book. (e) Test certificatesfor confirming above standards from OEM is mandatory. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 25 mm thick and 3 Mtr. Long 105 Supply & Laying following size earth stripin horizontal or vertical run in surface by means of Earth strip DMC Insulatorincluding riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 25mm x 5mm copper strip 106 25mm x 6mm G.I. ( Hot Dipped) Strip 107 Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles,making connection with GI/Cu purity purity >95%thimble etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .8 SWG G.I. ( Hot Dipped) Wire 108 Providing & Fixing of IK08IP65 protected Top/Bottom mounted LED Post top Luminaire made of single piece constructionpowder coated die cast alluminium housing with UV stabalized Clear / frosted Polycarbonate diffuser andAluminium anodised with sand blast reflector. The System level Luminous efficacy ≥100 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N)and efficiency > 85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained . Driver current <750mA.Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Minimum lumen output 4500 lm Post top Luminarie 109 Supply and erection of PU coated , 6 to 7 mm thick Glass / FibreReinforced Pole (GRP /FRP) made by CNC filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. designed to withstand the maximum wind speed as per IS 875,and Tested for deflection not more than 15% length of pole as per ASTM D 4923, The pole should be in one piece and tapered round in shape, pole shafts shall be providedwith FRP Anchor with suitable MS cated Base with provision for fixing 4 no. foundation bolts( Including cost of Foundation Bolt),ThePole shall have lockable door of approximate 500 mm length at the elevation of 500 mm from the Base plate with bakelite sheet having 6A SP MCB and 16 sqmm stud type connector ( 4 nos) inside the pole at door opening for cable connection of following length and dimension on Existing cement concrete foundation. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 3 Mtr. Long, Top/ Bottom OD Dia 89/126mm ± 2mm approx. With Base250X250 X 10mm 110 Single arm overhang 111 Providing & Fixing of IK10IP65 protected 600 mm height LED Bollard Luminarie with base platemade of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy ≥90 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N)and efficiency > 85%, PF>0.9, THD<20% and input Voltage range of 90-270V AC at 50Hz. System life of 30000 Burning hours with 70% of Initial Lumens maintainedLight output in Cool white or Warm White Colour as per engineers choice. driver current <750mA.Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in house NABL lab setup for all testing facilities forLED fixtures.(LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Minimum lumen output 980 lm Bollard 112 Supply , Installation, Testing and Comissioning of IS:1475 marked self contained drinking water cooler withhermeticallysealed compressor,non CFC refrigerent suitable for operation on 230V/1pH/50Hz AC supply,Full stainless steel (SS304)body (0.8 mm thick)and tank (0.5 mm thick) , stainless steel water tray,minimum two nosBrass Chrome plated faucets and suitable drainage system complete in all respect with requiredheight MS fabricated and Painted Angle iron frame( Cost of frame to be paid Extra )complete in all respect of the following capacity.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . cooling capacity 150 Ltr./Hr. and storage capacity 150 Ltrs 113 P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor :Size 580x440 mm. 114 P & F European type white glazed vitreous china Ist quality Double symphonic W.C. (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor. 115 P & F water closet Seat Covers with brass hinges completeIS 2548-1996 Solid PVC (ISI marked) grade-I White for EWC.: 116 P&F C.P. lugs for toilet seat cover 117 P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete. Flat Back (large) or half stall size 610x44x80mm 118 P & F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. IS 2556 (Part VI Sec.4)-1995. Makrana II quality marble having light spots. 119 P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with CP brass long band as per IS:7231 120 P & F Flush Pipe of approved make with complete fittings for high level flushing cistern: PVC exposed (heavy) 32mm. 121 P&FC.P.brassUrinalFlushPipeset complete with flanged brackets of approved make. For 1 Urinal 122 P & F C.P. brass Urinal Spreader for stall urinal of approved make. 123 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :Size 610 mm x 510 mm 124 P&F Soap dish or tray of approved quality/ make.C.P. brass heavy and superior quality 125 P&F looking mirrors with PVC frame of approved ISI Size make. 500x400mm 126 P&F Jet spray for water closet with C.P. copper tube flange of approved make 127 Providing and fiixng C.P. flange for 15mm dia taps 128 P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make:C.P. Pillar cock, Swan-neck with casted spout, 15mm nominal bore. 129 P & F Bib Cock (IS:8931 Mark) Superior quality of approved make :C.P. Brass bib cock, 15 mm nominal bore. 130 P & F Stop Cock(IS :8931 Mark),superior quality & ofapproved make: Brass 400 gm. 15mm nominal bore. 131 P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : Brass wt. Not less than 300 gm,15mm. 132 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15 mm Brass (IS:8931 marked). 133 P & F 15 mm. Dia Connection pipe of approved quality/make:C.P. Brass Pipe with CP Brass nuts upto length 450 mm. 134 P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 32 mm nominal bore. 135 P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.500 litres capacity. 136 Hoisting Charges for each floor : 137 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20mm dia 138 25mm dia 139 32mm dia 140 P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 110mm dia 141 160mm dia 142 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:110mm dia Coupler 143 Plain Tee 144 Door Tee 145 Door Y 146 Bend 45 147 Bend 87.5 148 Door Bend (top side) 149 Door bend (left &right) 150 Vent Cowel 151 Door Cap 152 Pipe clip 153 WC connector with lipring 154 WC connector bent type 155 Plain floor trap 156 P-Trap 157 S-Trap 158 Gully Trap 159 Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C.flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : Depth up to 1.5 M 160 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 300 X 300 mm depth upto 0.5 MCement cover with frame. 161 Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering,jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth worketc . complete including disposal of surplus earth within a lead of 50 mtr .Inner dia90 Cm & 10 to 12 Mtr deep. 162 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 gradeC.C floor &RCC slab covering with M15 grade c.c. floor,50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 400 x140x150 cm.(for 50 users)with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways including shuttering complete in all respect. 163 Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete : 450mm dia Internal 164 Construction oftubewell up to 100m depth and above to accomodate housing and assembly pipe in all types of alluvium strata by rotay drilling method with code of practice for construction and testing of tubewells (IS:2800 (Part-II) : 1991 and IS:2800 (Part-II) :1979 both amended up to date) with supply of bail plug if necessary.The work will not include cost of housing pipe and strainer pipe assembly cost, gravel and development work. Work would be deemedcompleted only after obtaining sound free water during pumping. 200 mm nominal bore 165 Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. 150 mm Nominal Bore. 166 Construction of Recharge Shaft in filter pit including Earth work Excavation , lifting excavted earth with all lift and 50 m lead and centering & shuttering evenever required. Diameter 900 mm 167 Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20 mix with40 mm thickness. Diameter 900 mm 168 Supply & lowering air line of 25mm dia, G.I. pipe B class having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion & making air vent at top including the cost of Tee-Nipples, Elbow, Socket etc. 169 Supply and lowering vent air pipe 63mm dia rigid PVC pipe(IS 4985) mark class II (4kg per cm2 ) with required all necessary fittings including perforation of 3 to 5 mm size all around the pipe at a distance of 180 to 220mm in zig zag fashion and making air vent at top complete as per direction of Engineer incharge. 170 Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voidsSize 9 to 12 mm 171 Size 3 to 5 mm 172 Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, without deduction of voids. 173 SITC ofDewatering Submersible Motor Pump set, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008,& IS12615:2011. with SS Impellor, body, shaft, mechanical seal etc. as required. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submitNABL / CPRI / ERDA accrediatedlab type test certificate before execution. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 1.0 HP, 3-Ø, (5 - 12)Mtr, (333 - 95) LPM
Contract Date: Dec 26, 2025 Contract Value : ₹ 2.93 Crore
Government Departments No of Bidders 1
Rajasthan View Result →
48.
Public Administrative Department #8488806 AOC
To Carry Out Various Development Works At Wagheshwar Udyan Wagholi.ITEM NO : 1 GRP Pole 5 mtr Height conical shape made by Computer Numerical Controlled Filament Winding Machine using thermoset Resin (with Fire retardant and UV properties) having 62-65% glass content in one-piece, Top OD-99?1, Bottom OD-165+- Avg. Pole thk: 8mm +-0.5mm. Specific Gravity (Ref Spec ASTM D 792): 1.5-1.8 gm/cm^3, Water absorption(Ref Spec ASTM 570): <0.5%, Tensile Strength(Ref Spec ASTM D 4923): 250? MPa, Flextural Strength(Ref Spec ASTM D 790): 250?50 MPa, Deflection max 10% (Ref Spec ASTM D 4923) @50 kg load, Paint film thk 80-100 Micron. Two coats of UV PU Paint is must colour as per Engineer in charge instructions.GRP Base Plate Round-325 mm Thk 16mm, PCD 250?1, Slot hole 4-18(mm)+-0.05(mm) and GRP cylindrical insert part 350 mm fitted with Pole by 8 Nos SS 304 Bolts at time of Filament winding process. Internal Junction Box (1 no. 1-1.5A SP MCB & 1 no Way Connector fitted on Din rail) @ height 1000mm.Cover to provided with Neoprene Rubber. Provision for overhead service cable - 15 mm Two round holes 180 Degree apart to be provided at 700 mm from top of pole. Rubber Grommet to be provided both holes to avoid water ingress (if required) SSR Item No : 3.03 ) (PMC NON-DSR ) Unique No (03052302) Rate List Year (2023-2024)Work ID : E9_2025_P36940_DEW Page 2 of 6 Budget Code: ITEM NO : 2 GRP Pole 7 mtr Height conical shape made by Computer Numerical Controlled Filament Winding Machine using thermoset Resin (with Fire retardant and UV properties) having 62-65% glass content in one-piece, Top OD-101?1, Bottom OD-194+-1 , Avg. Pole thk: 8mm +-0.5mm. Specific Gravity (Ref Spec ASTM D 792): 1.5-1.8 gm/cm^3, Water absorption(Ref Spec ASTM D 570): <0.5%, Tensile Strength(Ref Spec ASTM D 4923): 250?50 MPa, Flextural Strength(Ref Spec ASTM D 790): 250?50 MPa, Deflection max 10% (Ref Spec ASTM D 4923) @50 kg load, Paint film thk 80-100 Micron. Two coats of UV PU Paint is must .colour as per Engineer in charge instructions.GRP Base Plate Round-350 mm Thk 18mm, PCD 270?1, Slot hole 4-18(mm)+-0.05(mm) and GRP cylindrical insert part 350 mm +-1 fitted with Pole by 8 Nos SS 304 Bolts at time of Filament winding process. Internal Junction Box (1 no. 1-1.5A SP MCB & 1 no 4 Way Connector fitted on Din rail) @ height 1000mm.Cover to be provided with Neoprene Rubber. Provision for overhead service cable - 15 mm Two round holes 180 Degree apart to be provided at 700 mm from top of pole. Rubber Grommet to be provided for both holes to avoid water ingress (if required) ( SSR Item No : 5.05 ) (PMC NON-DSR ) Unique No (03052304) Rate List Year (2023-2024) ITEM NO : 3 FRP Single arm 1/1.5 MtrBracket with SS Nut Bolts. (As per Attached Specifications) ( SSR Item No : 3 ) (PMC NON-DSR ) Unique No (06042304) Rate List Year (2023-2024) ITEM NO : 4 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). ( SSR Item No : 16.03-09 ) (PMC Electrical ) Unique No (5465) Rate List Year (2023-2024) ITEM NO : 5 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV ( SSR Item No : 1.03-14 ) (PMC Electrical ) Unique No (3549) Rate List Year (2023-2024) ITEM NO : 6 Erecting departmentally supplied LED street light/ flood light fitting above 80 to 150W . ( SSR Item No : 2.04-25 ) (PMC Electrical ) Unique No (3886) Rate List Year (2023-2024) ITEM NO : 7 Supplying, erecting & terminating armoured cable 4 core 6 sq. mm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL SSR Item No : 7.13 ) (PMC Electrical ) Unique No (4682) Rate List Year (2023-2024) ITEM NO : 8 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. SSR Item No : 7.06-09 ) (PMC Electrical ) Unique No (6909) Rate List Year (2023-2024) ITEM NO : 9 For 7m / 8m Pole: - Disconnecting cable / service wore, removing junction box and fitting with bracket safely on ground and removal of pole. SSR Item No : 23.04 ) (PMC Electrical ) Unique No (6781) Rate List Year (2023-2024) ITEM NO : 10 For 9m / 10m Pole: - Disconnecting cable / service wore, removing of junction box and fitting with bracket safely on ground and removal of pole. SSR Item No : 23.05 ) (PMC Electrical ) Unique No (6782) Rate List Year (2023-2024) ITEM NO : 11 Transporting pole from one place to other as per instructions. SSR Item No : 23.02 ) (PMC Electrical ) Unique No (6779) Rate List Year (2023-2024) ITEM NO : 12 Supplying and erecting blanking plate of suitable size on MCBDB. SSR Item No : 5.04-14 ) (PMC Electrical ) Unique No (4385) Rate List Year (2023-2024) ITEM NO : 13 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB SSR Item No : 5.03-01 ) (PMC Electrical ) Unique No (4346) Rate List Year (2023-2024) ITEM NO : 14 Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. SSR Item No : 2.01-05 ) (PMC Electrical ) Unique No (3818) Rate List Year (2023-2024) ITEM NO : 15 Point wiring for light/bell/exhaust fan in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW SSR Item No : 1.07-19 ) (PMC Electrical ) Unique No (3652) Rate List Year (2023-2024) ITEM NO : 16 Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW SSR Item No : 1.07-21 ) (PMC Electrical ) Unique No (3654) Rate List Year (2023-2024) ITEM NO : 17 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW SSR Item No : 1.07-20 ) (PMC Electrical ) Unique No (3653) Rate List Year (2023-2024) ITEM NO : 18 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. SSR Item No : 1.02-06 ) (PMC Electrical ) Unique No (3519) Rate List Year (2023-2024) ITEM NO : 19 Supplying, erecting & marking FPMCB 6A to 32A, with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB SSR Item No : 5.03-12 ) (PMC Electrical ) Unique No (4357) Rate List Year (2023-2024) ITEM NO : 20 Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( SSR Item No : 5.03-13 ) (PMC Electrical ) Unique No (4358) Rate List Year (2023-2024) ITEM NO : 21 Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. ( SSR Item No : 5.04-13 ) (PMC Electrical ) Unique No (4384) Rate List Year (2023-2024) ITEM NO : 22 Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF ( SSR Item No : 2.10-21 ) (PMC Electrical ) Unique No (3971) Rate List Year (2023-2024) ITEM NO : 23 Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. ( SSR Item No : 1.06-23 ) (PMC Electrical ) Unique No (3598) Rate List Year (2023-2024) ITEM NO : 24 Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. ( SSR Item No : 2.10-15 ) (PMC Electrical ) Unique No (3965) Rate List Year (2023-2024) ITEM NO : 25 Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-06 ) (PMC Electrical ) Unique No (3867) Rate List Year (2023-2024) ITEM NO : 26 Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-16 ) (PMC Electrical ) Unique No (3877) Rate List Year (2023-2024)
Contract Date: Dec 24, 2025 Contract Value : ₹ 5.50 Lakh
Local Bodies No of Bidders 3
Maharashtra View Result →
49.
Petroleum and Natural Gas #8481040 AOC
Rate Contract For The Period Of 02 Years For Civil Works To Support Operation And Maintenance For Mngl Nashik Ga.; 1 Resto .-with supply of tiles/paver blocks 2 RCC 1: 1.5:3 at ground level-M20 Upto 16 MM 3 White wash -1 + 2 Coat 4 Painting -Oil bound 5 Painting-Oil Paint(to, Windows/Fencing) 6 Const._ Valve_Chamber_RCC upto 4x5 7 Coost_ Valve_Chamber_Brick upto 4x2 8 Replacement_chamber cover FRP{20 tonnes) 9 RCC chamber cover heavy duty(20 Tons) 10 Supply & Filling of sand 11 570X300x100mm RCC route markerInstallation with Painting 12 Km Route Marker installation,Painting with foundation 13 RCC Pipe full round 10 14 On rent-Core Cutting Machine 8 dia 15 Supply-7 cu.m. Nitrogen Cylinder 16 Manpower supply-welder with welding m/c 17 Prov.&Ftxing Fencing structure (ht-2.1 m) 18 Providing & fixing 2m wide Fencing Gate 19 Construction of Riser Pedestral 20 Replac_chamber cover heavy duty_50 Tones 21 Replac_chambercover GRP/FRP _50 Tones 22 RCC Route marker Paint_Letters highlling 23 Pole marker painting and stenciling 24 Resto.-w/o supply ol files/paver blocks 25 Replacement of Checker Plate upto 8 mm 26 Replacement of Checker Plate upto 20 mm 27 RCC work for repairing tubing trenche 28 Construction of new SR foundation 29 Repair of SR foundation 30 Replacement of Chamber cover FRP 31 Supply of safety Cones 32 Supply of Plastic Chain 33 Operation Slgnage Safety Board foam type 34 Foam Boardany size 35 Excavation & Backfilling-Normal Surface 36 PCC 1:2:4 at ground level-M15 37 Concrete (Ready. Mix upto M40) 38 Const. 115mm brick masonary wall 39 Plastering-15mm thick plaster 40 PVC Pipe 1 41 PVC Pipe 2 42 PVC Pipe 3 43 PVC Pipe 4 44 Fabrication work- Wiremesh fencing 45 Liasioning for permission 46 570x600mm GRP/FRP Trench cover 47 RCC Pipe half round 6 48 On rent-JCB with bucket breaker attach. 49 On rent-Compressor breaker 50 On rent-crane upto 5T with lifting belts 51 On rent-Tempo (Tata 407) 52 On rent. Tata ACE Equivalent 53 On rent- Tractor with trolley 54 On rent - DG with operator upto 30KVA 55 Manpower supply unskilled labour 56 Construction ofTrench RCC 57 RCC1:1 5:3 At Gr.LevelM 40 upto 16mm 58 Const,_ Valve_ Chamber_RCC above 4x5 59 Const._ Valve_Chamber,_Brick above-4x2 60 Fabrication work-MS Angle 25255 mm 61 Fabrication work-GI blue shed for roof 62 Granite Work with supply & Installation 63 Angle Repairing Work of Tubing trenches 64 Suppfy of road steel barricades_Std 65 Fabrication work (50*50*5MM) 66 Waterproofing 67 Fab. Work I,C,T Angle/Channels upto 10mm 68 Fab. Work-MS Pipe upto 65mm Dia 16g 69 Tractor Breaker (Minimum 3 hrs) 70 Truck (19 ft. long) Ashok Ley. (50km) 71 Truck (19 ft. long) Ashok Ley. (20km) 72 Repairing and fixing 2M Wide fencing gate 73 Pole marker installation with painting 74 SR Tapping Plate marker 75 Trailer 20 Ton capacity (Upto 50 Km) 76 Trailer 20 Ton capacity (Upto 20 Km) 77 Supply & Installation 25x5mm GI strip for earthing 78 Note : The quantities of individual item can vary as per site requirement. The payment will be made as per actual certified measurement at site.
Contract Date: Dec 23, 2025 Contract Value : ₹ 47.60 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
50.
Public Administrative Department #8474078 AOC
To Carry Out Electrical Improvement Works In Ch. Sambhaji Udyan.-ITEM NO : 1 GRP Pole 5 mtr Height conical shape made by Computer Numerical Controlled Filament Winding Machine using thermoset Resin (with Fire retardant and UV properties) having 62-65% glass content in one-piece, Top OD-99?1, Bottom OD-165+-1 , Avg. Pole thk: 8mm +-0.5mm. Specific Gravity (Ref Spec ASTM D 792): 1.5-1.8 gm/cm^3, Water absorption(Ref Spec ASTM D 570): <0.5%, Tensile Strength(Ref Spec ASTM D 4923): 250?50 MPa, Flextural Strength(Ref Spec ASTM D 790): 250?50 MPa, Deflection max 10% (Ref Spec ASTM D 4923) @50 kg load, Paint film thk 80-100 Micron. Two coats of UV PU Paint is must colour as per Engineer in charge instructions.GRP Base Plate Round-325 mm Thk 16mm, PCD 250?1, Slot hole 4-18(mm)+-0.05(mm) and GRP cylindrical insert part 350 mm fitted with Pole by 8 Nos SS 304 Bolts at time of Filament winding process. Internal Junction Box (1 no. 1-1.5A SP MCB & 1 no 4 Way Connector fitted on Din rail) @ height 1000mm.Cover to be provided with Neoprene Rubber. Provision for overhead service cable - 15 mm Two round holes 180 Degree apart to be provided at 700 mm from top of pole. Rubber Grommet to be provided for both holes to avoid water ingress (if required) SSR Item No : 3.03 ) (PMC NON-DSR ) Unique No (03052302) Rate List Year (2023-2024) ITEM NO : 2 FRP Single arm 1/1.5 MtrBracket with SS Nut Bolts. (As per Attached Specifications) SSR Item No : 3 ) (PMC NON-DSR ) Unique No (06042304) Rate List Year (2023-2024) ITEM NO : 3 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). SSR Item No : 16.03-08 ) (PMC Electrical ) Unique No (5464) Rate List Year (2023-2024)ITEM NO : 4 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). ( SSR Item No : 16.03-09 ) (PMC Electrical ) Unique No (5465) Rate List Year (2023-2024) ITEM NO : 5 Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary. ( SSR Item No : 2.08-14 ) (PMC Electrical ) Unique No (3937) Rate List Year (2023-2024) ITEM NO : 6 Supply of cast iron Decorative pole RLP-100-50 90(Height 4950mm) 285Kg ( SSR Item No : 20.17-330 ) (PMC Electrical ) Unique No (6453) Rate List Year (2023-2024) ITEM NO : 7 १३ मी. इलेिक लँडर(दर १२ तास) ( SSR Item No : 3.03 ) (PMC NON-DSR ) Unique No (14062303) Rate List Year (2023-2024) ITEM NO : 8 Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-04 ) (PMC Electrical ) Unique No (3865) Rate List Year (2023-2024) ITEM NO : 9 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( SSR Item No : 5.03-01 ) (PMC Electrical ) Unique No (4346) Rate List Year (2023-2024) ITEM NO : 10 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV ( SSR Item No : 1.03-14 ) (PMC Electrical ) Unique No (3549) Rate List Year (2023-2024)ITEM NO : 11 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. ( SSR Item No : 7.06-09 ) (PMC Electrical ) Unique No (6909) Rate List Year (2023-2024) ITEM NO : 12 Supplying, erecting & terminating armoured cable 4 core 6 sq. mm complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( SSR Item No : 7.13 ) (PMC Electrical ) Unique No (4682) Rate List Year (2023-2024) ITEM NO : 13 Supply & installation of cast Alum.Decorative 30W LED Fitting .Make-Dwarka Castings,Gopi Intricast,Pooja Industries ( SSR Item No : 1.02 ) (PMC NON-DSR ) Unique No (28081702) Rate List Year (2022-2023) ITEM NO : 14 Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FGODF/ FLS2. ( SSR Item No : 2.04-16 ) (PMC Electrical ) Unique No (3877) Rate List Year (2023-2024) ITEM NO : 15 Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. ( SSR Item No : 2.01-05 ) (PMC Electrical ) Unique No (3818) Rate List Year (2023-2024) ITEM NO : 16 Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22 / E-􀀀27 base ( SSR Item No : 2.08-13 ) (PWD-PUNE-ELECTRICAL ) Unique No (284761) Rate List Year (2022-2023) ITEM NO : 17 Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/ BW SSR Item No : 1.03-02 ) (PMC Electrical ) Unique No (3537) Rate List Year (2023-2024) ITEM NO : 18 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW SSR Item No : 1.07-20 ) (PMC Electrical ) Unique No (3653) Rate List Year (2023-2024) ITEM NO : 19 Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW SSR Item No : 1.07-21 ) (PMC Electrical ) Unique No (3654) Rate List Year (2023-2024) ITEM NO : 20 Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB SSR Item No : 5.03-02 ) (PMC Electrical ) Unique No (4347) Rate List Year (2023-2024) ITEM NO : 21 Supplying, erecting & marking SPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB SSR Item No : 5.03-04 ) (PMC Electrical ) Unique No (4349) Rate List Year (2023-2024) ITEM NO : 22 Supplying, erecting & terminating armoured cable 4 core 10 sq. mm. complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL SSR Item No : 7.14 ) (PMC Electrical ) Unique No (4683) Rate List Year (2023-2024) ITEM NO : 23 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP SSR Item No : 9.01-04 ) (PMC Electrical ) Unique No (4907) Rate List Year (2023-2024) ITEM NO : 24 PRP shock proof junction box cover for octagonal pole with PMC embossed and two ribs of size 76mmx10mmx6mm for additional rigidity and stiffness. ( SSR Item No : 20.17-163 ) (PMC Electrical ) Unique No (6286) Rate List Year (2023-2024) ITEM NO : 25 Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. ( SSR Item No : 1.04-03 ) (PMC Electrical ) Unique No (3554) Rate List Year (2023-2024) ITEM NO : 26 Providing Fiber Reinforced Plastic Insulation for Streetlight Pole by applying 3mm thick FRP coat comprising of Primium quality resin,Plastic matt (450E),hardener, cobalt, color pigment complete with jell coat to give the profile resin-rich surface and enhance the appearance of the FRP coat.Before applying FRP coat insure that the surface should be moisture free and clean it by polish paper ( SSR Item No : 1 ) (PMC NON-DSR ) Unique No (21012501) Rate List Year (2024-2025) ITEM NO : 27 Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. ( SSR Item No : 6.01.01 ) (PMC Electrical ) Unique No (4539) Rate List Year (2023-2024)
Contract Date: Dec 22, 2025 Contract Value : ₹ 2.58 Lakh
Local Bodies No of Bidders 3
Maharashtra View Result →
TenderDetail
Loading tenders