View Bid Results For Glaze Tile Tenders

We found 233 Bid Results related to glaze tile tenders. You can find Contractor details who won glaze tile tenders along with contract details in Bid awards announcements section.

Indian Tenders
125
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
1
Live Opportunities Worldwide
Filters
Stage
136
64
33
Tender Publishing Platform
7
226
State / UT
12
148
34
14
12
7
5
5
4
1
1
1
1
Contract Value
150
52
25
3
Publish Date
0
0
0
0
0
Sector
11
139
51
18
9
5
5
2
1
1
1
1
Ownership
3
171
44
18
Within keyword
Active filters:
Showing 1–5 of 233 tenders matching your filters
1.
Public Administrative Department #11278159 Technical Bid
Tender for Site Clearance: , Surface Dressing Of The Ground Including Removing Vegetation And In Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M. All Kinds Of Soil . , Earth Work: , Earth Work In Excavation By Mechanical Means (Hydraulic Wxcavator) Manual ,Eans In Foundation Trenches Ordrains Including Dressing Of Sides And Ramming Ofbottoms, Lift Uoto 1.5M Including Getting Out The Exavated Soil Anddisposal Of Surplus Excavated Soil As Directed Within A Lead Of 50M. , Antitermite Treatment: , Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified.Chlorpyriphos/Lindane Emulsifiable Concentrate Of 20%. , Back Filling Of Earth: , Filling Available Excavated Earth In Trenches Plinth Sides Of Foundation Etc.In Layer Not Exceeding 20 Cm In Depth Consolidating Each Deposited Layer By Ramming And Watering Lead Upto 50M And Lift Upto 1.5M. , Filling With Available Fly Ash And Earth In Trenches Bor Embankment In Layer With Intermediate Layer Of Compacted Earth After Every Four Layers Of Compacted Depth Of Fly Ash Sides & Top Layer Of Filling Shall Be Dine With Earth Having Total Minimum Compacted Thickness 30 Cm Or As Decided By Engineer -In- Charge Including Compacting Each Layer By Rolling Ramming And Watering All Complete As Per Drawing And Direction Of Enginner-In-Charge. , Supply & Filling In Plinth With Sand Under Floors Including Watering Ramming Consolidating And Dressing Complete. , Plain Cement Concrete , Providing And Laying In Position Cement Concrete 1:4:8 Aggregated Excluding The Cost Of Centering And Shuttering-All Work Upto Plinth Level. , Reinforced Cement Concrete Work , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring Shuttering Finishing And Reinforced-All Work Upto Plinth Level 1:1.5:3 All Works Upto Plinth Level. . , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring Shuttering Finishing And Reinforced-All Work Upto Plinth Level 1:1.5:3 All Works Above Plinth Level Upto Floor V Level. , Plinth Protection , Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation Leveling & Dressing & Finishing The Top Smooth. , Shuttering & Centering , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Foundations ,Footing ,Bases Of Column Etc. For Mass Concrete. , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Columns ,Pillars,Piers, Abutments, Posts And Struts. , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Suspended Floors ,Roofs,Landings, Balconies And Access Platform. , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Lintels, Beams ,Plinth Beams,Girders, Bressumers And Cantilevers. , Reinforcement Of Steel , Reinforcement For Reinforced Cement Concrete Work Including Straighting Cutting,Bending,Placing In Position And Bending All Complete Themro-Mechanically Treated Bars. , Brick Work , 230Th Brick Work With Comman Burnt Clay F.P.S (Non Modular) Brick Of Class Designation 75 In Foundation & Plinth In Cement Mortar 1:6 , Brick Work With F.P.S Bricks Of Class 75 In Super Structure Above Plinth Level Up To Floor Five Level In All Shapes And Sizes In Cement Mortar 1:6 , Half Brick Masonry With F.P.S Bricks Of Class Designation 75 In Super Structure Above Plinth Level Up To Floor Five Level In Cement Mortar 1:4 , Door, Window, Ventilator , Providing And Fixing Two And Half Track Three Panels Sliding Window With Two Glazed & One Wire Mesh Panels With Aluminium Channel For Roller Track, Wool Pile, Nylon Rollers With Ss 304 Body. Using R2 Series With Frame (65 Mm & Above) X (40 Mm & Above) & Glazed Sash (25 Mm & Above) X (50 Mm & Above) & Fly Screen Sash (18 Mm & Above)X (40 Mm & Above) With Zinc Alloy (Zamak) Powder Coated Touch Locks With Hook (Height Upto 1.2 Metre). , Providing And Fixing Two Track Two Panels Sliding Door With Aluminium Channel For Roller Track, Wool Pile, Zinc Alloy (Zamak) Powder Coated Handle On Every Panel Along With Multi-Point Locking System, Adjustable Nylon Rollers With Ss 304 Body. Using R3 Series With Frame (55 Mm & Above) X (40 Mm & Above) & Sash (30 Mm & Above) X (7 4 Mm & Above). (Height Upto 2.5 Metre). , Providing And Fixing Fixed Window I Ventilator With Mullion I Transom. Using R1 Series With Frame (33 Mm & Above ) X (35 Mm & Above) & Mullion (33 Mm & Above) X (50 Mm & Above). (Height Upto 0.90 Metre) , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Extruded Printed And Laminated Section Having Overall Dimension 115 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Beading On One Side, The Styles And Rails Mitred Cut And Joint At Corners By Inserting 2 Nos Pvc Profile Reinforcement Of Size 75 Mm X 200 Mm Long With Cross Section Size Of 28 Mm X 30 Mm Having Wall Thickness 2 Mm (± 0.2 Mm). Styles, Rails And Reinforcements To Be Fusion Welded Together. Only Hinge Side Vertical Style To Be Reinforced With Pvc Profile Reinforcement In Full Length , Railing Work , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Providing And Fixing Hand Rail Of Approved Size By Welding Etc. To Stee Ladder Railing, Balcony Railing, Staircase Railing And Similar Works, Including Applying Priming Coat Of Approved Steel Primer. M.S. Tube , Spiral Staircase (M.S) , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Providing And Fixing Hand Rail Of Approved Size By Welding Etc. To Stee Ladder Railing, Balcony Railing, Staircase Railing And Similar Works, Including Applying Priming Coat Of Approved Steel Primer. M.S. Tube , Plaster & Finishing Work , 12Mm Thick Plaster On The Plain In Side Of Mix 1:6 Mortar. , 15Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix. , 6Mm Thick Cement Plaster Of Ceiling Of Mix 1:6 Mortar. (Dsr 2023 -13.16.1) , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade: New Work Over And Including Water Thinnable Priming Coat With Cement Prime. , Providing And Applying White Cement Based Putty Of Average Thickness 1Mm Of Approved Brand And Manufacturer,Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade New Work , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: Two Or Nore Coats On New Work Over An Under Coat Of Suitable Shade With Oridinary Paint Of Approved Brand And Manufacture. , Flooring Work , Providing And Laying Verified Floor Tiles In Different Sizes With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Make In All Colours And Shades Laid On 20Mm Thick Cement Mortar 1:4 ,Jointing With Grey Cement Slurry @3.3Kg/Sq.M Including Groutibg The Joints With White Cement And Matching Pigments Etc. Complete Size Of Tile 600 X 600 Mm. , Providing And Fixing 1St Qaulity Ceramic Glazes Floor Tiles Conforming To Is:15622 Of Approved Make In All Colours Shades Except Burgundy Bottle Green Black Of Any Size As Approved By Engineer-In-Charge In Skirting,Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortar 1:3 And Jointing With Grey Cement Slurry @3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Fixing 1St Qaulity Ceramic Glazes Wall Tiles Conforming To Is:15622 Of Approved Make In All Colours Shades Except Burgundy Bottle Green Black Of Any Size As Approved By Engineer-In-Charge In Skirting,Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortar 1:3 And Jointing With Grey Cement Slurry @3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix Of 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg), Including Filling I Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. . , Providing And Laying Tactile Tile (For Vision Impaired Persons As Per Standards) Of Size 300X300x9.8 Mm Having With Water Absorption Less Than 0.5% And Conforming To Is:15622 Of Approved Make In All Colours And Shades In For Outdoor Floors Such As Footpath, Court Yard, Multi Modals Location Etc., Laid On 20 Mm Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) In All Shapes & Patterns Including Grouting The Joints With White Cement Mixed With Matching Pigments Etc. Complete As Per Direction Of Engineer-In-Charge. , False Ceiling , Providing And Fixing False Ceiling At All Heights Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Nclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X1 Ox0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre. , Water & Damp Proofing , Providing And Laying Water Proofing Treatment On Roofs Of Slabs By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying. ( , Drainage & Water Supply Works , Providing , Laying And Jointing Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 Including Testing Of Joints Etc. 150 Mm Diameter , Providing And Fixing Square-Mouth S.W Gully Trap Class Sp-1 Complete With C.I Grating Brick Masonry Chamber With Wter Tight C.I Cover With Frame Of 300X300mm Size The Weight Of Cover To Be Not Less Than 4.50Kg And Frame To Be Not Less Than 2.70Kg. As Per Standard Design. , Providing And Laying Cement Concrete 1:5:10 All Round S.W Pips Including Bed Concrete As Per Standard Design. 15Mm Dia S.W Pipe. , Constructing Brick Masonry Chamber For Underground C.I Inspection Chamber And Bends With Bricks In Cement Mortar 1:4. 455X610 Mm Iternal Dimensions Total Weight Of Cover With Frame To Be Not Less Than 38Kg Reinforced Cement Concrete Top Slab With 1:1.5:3 Mix , Providing And Fixing G.I Pipes Complete With G.I Fittings And Clsmps Including Cutting And Making Good The Walss Etc. Internal Work Exposed On Wall. , 15Mm Dia Nominal Bore , 25Mm Dia. Nominal Bore , 50Mm Dia. Nominal Bore , Providing And Fixing Ball Valve Of Approved Quality Complete High Or Low Pressure With Plastic Floats 25Mm Dia. Nominal Bore , Providing And Fixing Gun Metal Non-Return Valve Of Approved Quality :25Mm Nominal Bore. , Providing And Fixing Gun Metal Non-Return Valve Of Approved Quality :50Mm Nominal Bore. , Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions 15Mm Nominal Bore. , Providing And Placing On Terrace Polyethylene Water Storage Tank Isi:12701 Marked With Cover And Suitble Locking Arrangement And Amking Necessary Holkes For Intel Outlet And Overflow Pipes But Without Fittings And The Base Vsupport For Tank. , Providing And Fixing Soil,Waste And Vent Pipes:Sand Cast Iron S&S Pipe As Per Is:1729 100Mm , Providing And Fixing Soil,Waste And Vent Pipes:Sand Cast Iron S&S Pipe As Per Is:1729 75Mm , Providing And Fixing Plain Bend Of Required Degree.100Mm Sand Cast Iron S &S As Per Is:1729 , Providing And Fixing Single Equalplain Invert Branch Of Required Degree.100X100x100mm Sand Cast Iron S &S As Per Is:1729 , Providing And Fixing Single Equalplain Invert Branch Of Required Degree.75X75x75mm Sand Cast Iron S &S As Per Is:1729 , Providing And Fixing Mirror Of Superior Glass And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shade With 6Mm Thick Hard Board Backing :Rectangular Shape 453X357mm. , Providing And Fixing Terminal Guard: Sand Cast Iron S&S Pipe As Peris-1729 , Providing And Fixing M.S Stays And Clamps For Sand Iron/Centrifugally Cast Iron Pipes Of Diameter:10Mm Dia. , Providing And Fixing C.P Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms.15Mm Nominal Bore. , Providing And Fixing C.P Brass Stop Cock Of Standard Design And Of Approved Make Conforming To Is:8931. 15Mm Nominal Bore. , Providing And Fixing C.P Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931. 15Mm Nominal Bore. , Providing And Fixing 450 Mm Long Towel Rail With Total Length Of 495 Mm, 78 Mm Wide And Effective Height Of 88 Mm, Weighing Not Less Than 170 Gms , Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 15 Mm Nominal Bore , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. 15 Mm Nominal Bore , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 75 Mm Diameter , Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm Height Of 75Mm With Concealed Fitting Arrangments Weighing Not Less Than 106 Gms. , Sanitary Works , Providing And Fixing One Piece Construction White Vitreous China Squatting Plate With An Integral Longitudinal Flushing Pipe, White P.V.C. Automatic Flushing Cistern, With Fittings, Standard Size G.I. / Pvc Flush Pipe For Back And Front Flush With Standard Spreader Pipes With Fittings, G.I Clamps And C.P. Brass Coupling Complete, Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Etc. Wherever Required :Range Of Two Squatting Plates With 5 Litre P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitrepous China Flat Back Or Wall Corner Type Lipped From Urinal Basin Of 430X260xx350mm And 340X410x265mm Size Respectively With Automatic Flushing Cistern With Standard Flush Pipe Abd C.P Brass Spreaders With Brass Unions And G.I Clamps Complete,Including Painting Of Fitting And Brackets Cutting And Making Good The Walls And Floors Wherver Required :One Urinal Basin With 5 Ltr. White P.V.C Automatic Flushing Cistern , Providing And Fixing Soil ,Waste And Vent Pipes Sand Cast Iron S&S Pipe As Per Is:1729 , 100Mm Dia. , 75Mm Dia. , Providing And Fixing Trap Of Self Cleaning Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete,Including Cost Of Cutting And Making Good The Walls And Floors: Sand Cast Iron S&S As Per Is-17 , Providing And Fixing Wash Basin With C.I Brackets, 15Mm C.P Brass Pillar Taps,32Mm C.P Brass Waste Of Standard Pattern,Including Painting Of Fitting And Brackets,Cutting And Making Good White Viterous China Wash Basin Size 630X450mm With Single 15Mm C.P Brass Pillar Tap , Providing And Fixing C.P. Brass Shower Rose With 15 Or 20 Mminlet: 100Mm Diameter. , Electrical Work , Wiring For Light Point/Fan Point ,Exhaust Fan Point With 1.5Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface Steel Conduit With Modular Switch,Modular Plate Suitable G.I Box For Earhting The Point With 1.5 Sqmm Frls Pvc Insulated Copper Conductor Single Core Cable Isi Marked 1100 Volts Grade As Required For Group C Point Including Ceiling Rose And Lamps Holder As Required , Supplying And Fixing 5/6 Amps.Modular Type Switch On The Existing Modular Plate & Switch Box Including Cconnections But Excluding Modular Plate,Ac Etc. As Required. , Supply/Fixing 1 Or 2 Module Gi Box Of Size 75X75 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 3 Module Gi Box Of Size 100X75 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 6 Module Gi Box Of Size 200X75 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 8 Module Gi Box Of Size 125X125 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 12 Module Gi Box Of Size 200X150 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supplying And Fixing Following Piano Type 3Pin 5/6A Socket Outlet. , Supplying And Fixing 3 Pin 5 Amps Ceiling Rose On The Existing Junction Box/Wooden Block Including Connections Etc As Required. , Supplying And Fixing Suitable Size G.I Box With Modular Plate And Cover In Front On Surface Including providing and Fixing 3 Pin 5\6 Amps Modular Socket Outlet And 5/6 Amps Modular Switch Connections Etc. As Required. , Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate And Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Suitable Size G.I Box With Modular Plate And Cover In Front On Surface Including providing and Fixing 6 Pin 15/16 Amps And 5/6 Amps Modular Socket Outlet And 15/16 Amps Modular Switch Connections Etc As Required. , Supplying And Fixing 6 Way Double Door Surface Mounting Vertical Type 240 Volts Tpn Mcb Distribution Board Of Sheet Steel Dust Protected Duly Powder Painted,Including Of 63 Amps Tinned Copper Bus Bars,Common Neutral Link,Earth Bar,Din Bar For Mounting Mcbs Of Havells Make Model Load Line Or Its Equivalent Of Legrand/Abb/L&T/Scienmense Make Inclduing Painting Earhting Etc. As Required. , Supplying And Fixing Single Pole 5Amps-32 Amps Rating 240/415 Volts C Series Miniature Circuit Breaker Suitable For Including Loand Of Following Pole In The Existing Mcb Db Complete With Connections,Testing And Commisioning Etc As Required. , Supplying And Fixing Of 200Mm Sweep Double Ball Bearing Type Exhaust Fan Of Make Usha/Crompton/Phllips/Or Its Equivalent In All Respect As Required And Directed By Enginner-In-Charge. , Led Down Lighter (Smd Type) (System Lumen Efficacy ≥ 105 120 Lm/Watt ) Supplying, Installation, Testing & Commissioning Of Led Recessed/ Surface Down Light. , 30 Watt , 12 -15 Watt , Led Batten Light (System Lumen Efficacy ≥105 120 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Led Surface Mounted Batten Light Of Following Body Material And Construction As Per Is : 10322 , 18- 22 Watt , Providing And Fixing 32 Amps Single Pole Mcb In Existing Cubical Panel Board Including Drilling Holes In Cubical Panel Making Connection Etc. Includingtesting And Commissioning Etc As Required. , Wiring For Circuit/Sub-Main Wiring Along With Earthwire The Following Size Of Frls Pvc Insulated Copper Conductor Single Core Cable I.S.I Marked 1100 Volts Grade In Surface/Recessed Steel Conduitas Required. , 2 X1.5 Sqmm+1X1.5 Sqmm Earth Wire , 2 X2.5 Sqmm+1X2.5 Sqmm Earth Wire , 2 X 4 Sqmm+1X4 Sqmm Earth Wire , 2 X 6 Sqmm+1X6sqmm Earth Wire , Supply , Installation,Testing And Commissiong Of 1200 Mm Sweep, Bee 5 Star Rated,Ceiling Fan. , Water Cooler , Ceiling Fan , Wall Hanging Fan , Interior Work , Furniture Work , Mid Back Mesh Revolving Chair Black , High Back Revolving Chair Black/Blue , Workstation 8 Seater (8 Seater Table) Size: 96X36X30 , Bookcase Steel (4 Shelf Glass) Size: 72X30X18 , Workstation 8 Seater (8 Seater Table) Size: 12X2x2 , Directior Table Size: 72X36X30 , 5 Seater Sofa With Table , Air Conditioner , 2 Ton 5 Star Voltas , 1 Ton 5 Star , A/C Installing Charge , Wall Stand , Computer , Hp A/O Desktop 27-Cr0902in I3-13T 8Gb/512Gb/Win/Mso , Hp A/O Desktop 24-Cr0902in I3-13T 8Gb/512Gb/Win/Ms , Hp Printer Smart Tank 580Aio P/S/C/W , Cctv Camera , Dvr Cp Plus 8Ch , Smps 10A , Bullet Camera 2.4Mp (Guard+Mic) , Dome Camera 2.4Mp (Guard+Mic) , Hdd 2Tb , Pvc Box , Bnc Connector Set , Rack 2U , Installation Charge , 3+1 Cable , 1.5 Mtr. Hdmi Cable , 32 Inch Led Smart Tv
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 8
Uttarakhand View Result →
Madhya Pradesh View Result →
Uttar Pradesh View Result →
4.
Health and Family Welfare #10792772 Price Bid
Tender For Procurement Of Consumables, Dental Material, Glass Ware, Surgical Items, Chemical And Burs At Govt. Dental College & Hospital, Jalgaon, Dist. Jalgaon - 425 003 For The Year Of 2025-2026. , Microslides 75X25x1.30Mm Pkt Of 50 Slides - Box Of 10 Packets , Cover Slip 22X40mm ( Polythene ) Box Of 100 , Cover Slip 22X22mm (Square) Box Of 100 , Cover Slip 22X22mm (Round) Box Of 100 , Mouth Probe Piece , Mouth Mirror Piece , Mouth Mirror Top Piece , Dycal , Cavity Varnish Bottle , High Copper Alloy Bottle , Mercury Bottle , Gic Type 1 Pkt , Gic Type 2 Restorative Pkt , Cmcp Bottle , Kavo Dental Oil Spray Bottle , Eugenol Bottle , Zinc Oxide Powder Bottle Prime , Apf Gel Bottle Straberry , Calcium Hydroxide Powder Bottle , Etchent 37% Syringe Syringe , Acrylic Cold Cure (Pink) Liquid Can Of 4 Lit And Powder Of 3 Kg Jar , Acrylic Heat Cure (Pink) Liquid Can Of 4 Lit And Powder Of 3 Kg Jar , Seperating Medium Can , Zinc Phosphate Cement , Green Stick Compound Pkt , Rubber Base Impression Material , Light Cure Materials Shade A1, A2, B1, B2 Kit , Articulating Paper , Matrix Band No. 1 Piece , Matrix Band No. 8 , Formocresol Bottle , Rubber Dam Sheet 6 X 6 Piece , Dental Stone Bag Of 25 Kg , Dental Plaster Of Paris Bag Of 25 Kg , Zoe Impression Paste Pkt , Spacer Wax Upper/Lower Pkt , Ss Wire Guage 19 , Ss Wire Guage 21 , Ss Wire Guage 22 , Ss Wire Guage 23 , Ss Wire Guage 24 , Ss Wire Guage 26 , Die Stone Jar Of 2 Kg , Rc Solvent Prime , Polishing Paste , Teeth Set 1 X 16 , Teeth Set 1 X 6 (Upper And Lower) , Teeth Set 1 X 28 (Upper And Lower) , Impression Compound , Modelling Wax , Composite Bonding Agent 7Th Generation 10 Ml , Mta 1Gm , Acrylic Polishing Cake , Beading Wax Pkt Of 10 Sheets , Boxing Wax Pkt Of 10 Sheets , Resorbable Collagen Membrane , Composite Splint Material , Fibre Splint Material , Metapex , Elastomeric E Chain Grey Colour , Intraoral Elastics Green Colour , Bondable Lingual Buttons , Bondable Single Molar Tubes Mbt 022 , S.S. Wires 16 X 22 Upper 20 Pkts Each , S.S. Wires 16 X 22 Lower 20 Pkts Each , S.S. Wires 17 X 25 Upper 20 Pkts Each , S.S. Wires 17 X 25 Lower 20 Pkts Each , S.S. Wires 19 X 25 Upper 20 Pkts Each , S.S. Wires 19 X 25 Lower 20 Pkts Each , E Chain Short Clear , Light Cure Orthodontic Bonding Adhesive And Primer , Rcs Niti Archwires 17 X 25 Upper 10 Pkts Each , Rcs Niti Archwires 17 X 25 Lower 10 Pkts Each , Band Material Molar 180 X 006 Size , Lingual Sheaths , Intraoral Elastics Pink Colour , E Chain Long Clear , Intraoral Elastics Red Colour , Intraoral Elastics Blue Colour , Niti Archwires Ovoid 014 Upper , Niti Archwires Ovoid 014 Lower , Niti Archwires Ovoid 016 Upper , Niti Archwires Ovoid 016 Lower , Expansion Screws Upper Arch Pkt Of 10 , Expansion Screws Lower Arch Pkt Of 10 , Resin Modified Gic , Pumice Powder (Pkt Of 1Kg) , Tray Material Jar Of 3 Kg Powder And 4 Lit Liquid , Condensable Posterior Composite (Each Shade) , Haematoxylin Ehrlich Bottle Of 125 Ml , Eosin Bottle Of 125 Ml , Leishmans Stain Bottle Of 125 Ml , Paraffin Wax (58-60 0 C Non Cracking) Pkt Of 1 Kg , Xyline (Sulphur Free) Bottle Of 2.5 Liter , Haematoxylin Harris Red Colour Bottle Of 125 Ml , Crystal Violet Bottle Of 125 Ml , N/10 Hcl 500 Ml Bottle Of 500 Ml , Cederwood Oil (Immerssion Oil) Bottle Of 50 Ml , Glycerine (Glycerol) Bottle Of 200 Ml , Iodine Bottle Of 200 Ml , Karsolex Bottle Of 500 Ml , Xylocaine With Adrenaline 2 % Vail Of 25 Ml , Xyloquine Plain Without Adrenaline 2 % Vail Of 25 Ml , Xyloquine Jelly Tube Tube , Schiffs Reagents Bottle Of 500 Ml , Absolute Alcohol Bottle Of 500 Ml , Nitric Acid Lane Road Bottle Of 500 Ml , Dpx Mountant Bottle Of 250 Ml , Liquor Ammonia Bottle Of 500 Ml , Ez Cleaner For 3 Part Haematology Bottle Of100 Ml , Prob Cleaner For 3 Part Haematology Bottle Of 20 Ml , White Petrolium Jelly Pkt Of 500 Ml , Cidex Solution Bottle Of 500 Ml , Normal Saline Bottle Of 500 Ml , Glucose Powder 500Gm , Rbc Diluting Fluid 500 Ml , Wbc Diluting Fluid 500 Ml , Sodium Bicarbonate 500 Gm , Liquid Phenol 1 Liter , Gum Acacia 500 Gm , Calamine Powder 1 Kg , Bentonite 1 Kg , Diluent 20 Liter Can , Sterilium , Sodium Hypochlorite 3 % Bottle Of 500 Ml (Prime) , Hydrogen Peroxide- 6%(Prime) , Sodium Citrate 1 Kg , 2% G.P. (15- 40 ) Points Assorted , 6% G.P. (15- 40 ) Points Assorted , Finger Spreader , Finger Plugger , H File Assorted (15-40) , K File Assorted (15-40) , Protepar Rotory Files (Sx, S1, S2, F1, F2) 25 Mm , Protepar Rotory Files (Sx, S1, S2, F1, F2) 21 Mm , Carbide Bur- Round , Carbide Bur- Straight , Diamond Bur For Contra Angle Handpiece- Round , Diamond Bur For Contra Angle Handpiece- Inverted Cone 010 , Diamond Bur For Contra Angle Handpiece- Inverted Cone 12 , Diamond Bur For Contra Angle Handpiece- Staright Fissure 010 , Diamond Bur For Contra Angle Handpiece- Staright Fissure 012 , Diamond Bur For Contra Angle Handpiece- Tapered Fissure 009 , Diamond Bur For Contra Angle Handpiece- Tapered Fissure 010 , Diamond Bur For Air Rotor Handpiece- Round , Diamond Bur For Air Rotor Handpiece- Inverted Cone 010 , Diamond Bur For Air Rotor Handpiece- Inverted Cone 012 , Diamond Bur For Air Rotor Handpiece- Staright Fissure 010 , Diamond Bur For Air Rotor Handpiece- Staright Fissure 012 , Diamond Bur For Air Rotor Handpiece- Tapered Fissure 009 , Diamond Bur For Air Rotor Handpiece- Tapered Fissure 010 , Diamond Bur For Air Rotor Handpiece Long Shank - Inverted Cone 010 , Diamond Bur For Air Rotor Handpiece Long Shank - Inverted Cone 012 , Diamond Bur For Air Rotor Handpiece Long Shank - Straight Fissure 010 , Diamond Bur For Air Rotor Handpiece Long Shank - Straight Fissure 012 , Non Absorbable Surgical Suture 4.0 , Disposable Mask Box Of 100 , Sterile/Non Sterile Surgical Gloves No. 6 Pkt Of 50 Pairs , Sterile/Non Sterile Surgical Gloves No. 6.5 Pkt Of 50 Pairs , Sterile/Non Sterile Surgical Gloves No. 7 Pkt Of 50 Pairs , Sterile/Non Sterile Surgical Glovesno. 7.5 Pkt Of 50 Pairs , Edta Vacutainer Tube Pkt Of 100 Tubes , Examination Gloves Box Of 100 (Nulife) , Arch Bar , Stainless Steel Wire Of 24 Guage For Oral Surgery , Disposable Needle 26 Guage 1.5 Inches Box Of 100 , Disposable Syringe 2 Cement Concrete With Needle Box Of 100 , Disposable Syringe 5 Cement Concrete With Needle Box Of 100 , Disposable Surgical Dental Drape , Bandage Gauze , Resorbable Vicryl Sutures 4-0 , Resorbable Vicryl Sutures 5-0 , Disposable Head Caps Pkt Of 100 , Cotton Roll , Biomedical Waste Bag- Red , Biomedical Waste Bag- Black , Biomedical Waste Bag- Blue , Biomedical Waste Bag- Yellow , Dental Explorer , Spoon Excavators , Extraction Forceps [ Universal Maxillary (Upper) ] , Extraction Forceps [ Universal Mandibular (Lower) ] , Periodontal Elevator Set , Amalgam/Composite Placement Instruments: Condensers, Carvers, And Plastic Filling Instruments , Periodontal Probe Unc-15 , Twisers / Cotton Pliers , Universal Scalers , Kidney Tray , Instrument Tray , Topical Fluoride , Topical Fluoride Brushes , Dental Floss , Stainless Steel Bin - Sterilization Containers/Trays , Basic First-Aid Kit , Scalpel Handle , Surgical Blades No.12 , Surgical Blades No.15 , Surgical Needle Holder -Derf Straight 12.5 Cm , Surgical Needle Holder -Mayo-Hegar Straight 16.0 Cm , Cheatle Forceps , Suture Removal Scissors , Sharps Disposal Containers (Stainless Steel) , Hemostatic Agent Gelatin Sponges , Aromatic Ammonia Inhalants (60 Ml) , Rubber Bowl Large Stiff , Rubber Bowl Large Flexible , Rubber Bowl Small Stiff , Rubber Bowl Small Flexible , Plaster Straight Spatulae , Plaster Curved Spatulae , Plaster Knife , Mcintosh Sheet , Wax Knife , Wax Spatula , Le Crons Carver , Chip Blower , Denatured Spirit 1 Lit Bottle , Edentulous Rubber Mould Upper , Edentulous Rubber Mould Lower , Dentulous Rubber Mould Upper , Dentulous Rubber Mould Lower , Alcohol Blow Torch , Edentulous Stock Metal Trays Upper And Lower , Dentulous Stock Metal Perforated Trays Upper And Lower , Glass Slab , Glass Plate , Cellophane Sheet (Pkt Of 10) , 3 Point Articulators , Varsity Flask And Clamp (Upper And Lower) , Vaseline 1Kg , Cement Spatula Metal , Hot Plate , Fox Plane , Tungsten Carbide Burs (Denture Trimming Burs) , Alpine Stone Burs (Denture Finishing Burs) , Acrylic Bur Set , Sand Paper 100 Gritt , Sand Paper 220 Gritt , Sand Paper 300 Gritt , Sand Paper 80 Gritt , Porcelain Mixing Jar , Sand Paper Mandril , Agates Spatula , Buffing Wheel Cotton , Buffing Wheel Silk , Felt Cone , Measuring Cylinder , Non Eugenol Impression Paste , Resin Cement , Tray Adhesive , Alginate , Gas Torch , Gas Torch Refill , Spirit Lamp , Ceramic Finishing Bur Set , Soft Liner , Grey Coloured Bitewax , Diamond Bur For Air Rotor Handpiece- Sf 11 , Diamond Bur For Air Rotor Handpiece- Sf 12 , Diamond Bur For Air Rotor Handpiece- Tf , Diamond Bur For Air Rotor Handpiece- Tr 11 , Diamond Bur For Air Rotor Handpiece- Ex- 11 , Diamond Bur For Air Rotor Handpiece- Yellow Band Tr13 , Diamond Bur For Air Rotor Handpiece- Yellow Band Ex11 , Diamond Bur For Air Rotor Handpiece- Fo- 25 , Diamond Bur For Air Rotor Handpiece-Fo-30- Ef , Diamond Bur For Air Rotor Handpiece- Wr-13-S , Diamond Bur For Air Rotor Handpiece- Tf 21 Ef , Diamond Bur For Air Rotor Handpiece- Si 46 , 47 , Diamond Bur For Air Rotor Handpiece- Si 47 , Diamond Bur For Air Rotor Handpiece- Ex11ef , Straight Hand Piece Bur 1) Straight - Hp 702 , D Finder , C++ Files Asorted , Edta 17% Gel , Rotary Files 21 (4%) 17 , Rotary Files 25Mm (4%) 17 , Rotary Files 21 Mm(4%) 20 , Rotary Files25 Mm(4%) 20 , Rotary Files 21 Mm (4%) 25 , Rotary Files25 Mm (4%) 25 , Rotary Files 21 Mm(4%) 30 , Rotary Files 25 Mm(4%) 30 , Rotary Files 21 Mm(4%) 30 , Rotary Files 25 Mm (4%) 30 , Rotary Files 21&25 Mm(4%) 35 , Rotary Files 21 Mm(4%) 35 , Rotary Files 25 Mm(4%) 40 , (Dentsply) Gutta Percha (4%) 20 , (Dentsply)Gutta Percha (4%) 25 , (Dentsply)Gutta Percha (4%) 30 , Gutta Percha (4%) 40 , Endomotor , Contrangle Handipiece (Micromotor) , Gg Drills , Peeso Reamer , Protapar Hand Files (Sx, S1, S2, F1,F2) 25Mm , Protapar Hand Files (Sx, S1, S2, F1, F2) 21Mm , Gutta Percha 120 Points (6%) 20 , Gutta Percha 120 (6%) 25 , Gutta Percha 120 Points (6%) 30 , Gutta Percha 120 Points (6%) 40 , K File 08 , K File 10 , Prefabricated Metal Post , Fibre Post , Straight Carbide Bur , Map System Mta Carrier , Mylar Strips (For Composite) , Porcelain Fused To Metal Alloy , Silicone Sand , Opaque Paste All Shades , Dentine Powder- All Shades , Incisal Powder- All Shades , Glaze Paste , Glaze Liquid , Modelling Liquid , Opaque Liquid , Ceramic Build Up Brush No.- 6,7,8. , Built Up (Inlay) Wax , Diamond Burs (Ceramic Finishing Kit) , White Metal , Spounge , Occlusal Dentine Orange , Ceramic Separator , Die- Hardner , Die- Spacer , Shade Guide , Honeycomb Tray , Firing Pin(Peg) , Carborundum Disc With Mandril , Investment Material , Sprue Wax , Metal Finishing Burs , Debubbilizer Liquid , Silicone Burs For Finishing , Cermaic Repair Kit , Alumina Sand 100Um , Bone Graft , Rounger Forcep , Bone Graft Condenser , Bone Graft Carrier , Micromotor With Handpiece , Polishing Kit For Micromotor , Tooth Colored Cold Cure Resin (Shade A,B,C,D) , Build Up Separation Blade , Brown Cutting Disc , Separation Disc Steel , Cement Carrier , White Metal Polishing Burs , Ceramic Stains (Set Abcd) , Steel Hinge Articulators , Crucible Former , Ring Liner Rolls , Crucible , Casting Ring Large , Casting Ring Small , White Metal , Kirland Knife , Orbans Kinfe , Shugerman Bone File , Sluger Bone File , Krane Kaplan Pocket Marker , Separators Elastics , Separators Elastics Metal , Brakets Kits Metal (0.022) , Brakets Kits Ceramic (0.022) , Brakets Kits Titanium (0.002) , Preformed Bands , Buccal Tubes Bondable(0.022) , Elastic Threads Spools , Coils Spring (Open & Closed) , E Modules , Dental Floss , Application Tips , Face Bow , Lingual Buttons , Beggs Brackets Curve , Beggs Brackets Straight , Bite Registration Wax , Relieving Wax , Orthodontics Implants (Tad) , Orthodontics Implants Placement Kit , Check Retractors Small And Large , Separator Placement Pliers , Band Contouring Pliers , Band Pinchable Pliers , Meshtom Band Pusher , Band Crimping Plier , Nylon Band Seater , Double Beak Plier , Posterior Band Removing Plier , Boons Gauge , Pin & Ligature Cutter , Distal End Wire Cutter , Heavy Wire Cutter , Facebow Bending/Cutting Plier , Adams Pliers , Delarosa Arch Contouring Pliers , Bird Beak Plier , Jarabak Lightwire Plier , Nance Loop Forming Pliers , Tweed Loop Forming Plier , Youngs Loop Bending Plier , Mosquito Forcep , Nance Tie Back Plier , Bracket Removing Plier , Weingart Universal Plier , Straight Howe Plier , Curved Howe Plier , Half Round Plier , Universal Plier , Proximal Stripping Kit , Orthodontics ,Installation Stand , Artery Forcep , Bracket Holding Plier , Bowls & Spatulas , Hook Crimping Plier , Crimpable Hooks , Sealer Sealapex , Individual Tooth Mould(4 Each Tooth) , Composite Polishing Kit , Dappen Dish , Cotton Holder & Waste Reciever (10 Each) , Glass Slab , Handinstruments Kit , Chiesel , Lacrons Carver , Wedges , Jaw Set With Ivory Teeth , Articulator 3.5 , Agate Spatula , Blow Torch , Base Plate Wax (Box) , Bp.Blade No.12 , Bp.Blade No.15 , Bp Handle No. 3 , Painting Brush Set Dental Ceramic Porcelain , Carving Wax , Cement Spatula , Ceramic Tiles. , Chip Blower , Chip Nozzle , Dapen Dish Glass , Versity Flask , Clamps , Files (Round) , Files (Half Round) , Fox Plane , Glass Plate 4X 4 , Glass Slab 6X3 , Hote Plate , Impression Compound , Impression Tray Upper-0,1,2,3,4 , Impression Tray Lower-0,1,2,3,4 , Kidney Tray , Mackintosh Sheet Mtrs , Metal Trimmers , Modelling Wax , Mortar & Pestle , Spatula ( C ) , Spatula (S ) , Plaster Knife , Denture Boxes , Retainer Box , Ploshing Cloth , Porcelain Jar , Rubber Bowl ( B) , Rubber Bowl ( S) , Sand Paper , Sand Paper Mandrill , Scissor (S) , Scissor © , Spirit Lamp , Acrylic Stone Bur , Tweezer , Wax Knife , Wax Spatula , Dental Stone (3 Kg Bag) , Amoxycillin + Clavulanic Acid Dry Syrup 30Ml , Metronidazole 200Mg/5Ml Suspension 60Ml Bottle , Ibuprofen And Paracetamol Syrup 60Ml Bottle , Cefixime 100Mg/5Ml Syrup 60Ml , Amoxycilln 500 Mg + Clavulanic Acid 125Mg Tab , Amoxycilln 500 Mg Cap , Vitamin B Complex (Therapeutic) Nfi Tab , Diclofenac Sodium 50 Mg Tab , Ascorbic Acid 500 Mg Tab , Cefixime 200 Mg Tab , T. Doxycyclin 100 , Metronidazole 200Mg Tab , Metronidazole 400Mg Tab , Pantoprazole + Domp. 40 Mg Tab , Prednisolone 5 Mg Tab , Ibuprofen 400 Mg Tab , Ibuprofen 200Mg Tab , T. Aceclo + Para+ Sera , Ketorolac Tromethamine Dispersible 10Mg Tablet , Inj. Hydrocortisone 100Mg , Inj. Adrenaline 1Mg/1Ml , Inj. Atropine , Inj Aminophylline 250Mg , Povidone Iodine Germicide Gargle 2% W/V 50 Ml , Chlorhexidine Gluconate 0.2% Solution 80Ml Solution , Chlorhexidine Gluconate + Metro. And Lignocaine Oral Gel , Sodium Monoflorophosphate With Floride 0.7% Toothpaste , Tannic Acid , Zinc Chloride & Cetrimide Gum Stringents , Prevest Hemostal Liquid (15Ml) Dental Chloride Hemostatic Liquid
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Maharashtra View Result →
5.
Public Administrative Department #10777963 Price Bid
Tender For Garbdesar For Medical And Other Staff And Building Construction Etc. For Medical And Health System. - Earthwork in foundation excavation up to1.5m, ramming bressing both sides backfilling and dosposal of surplus soil within lead of 50m 2 Cement concrete in foundation and plinth with stone ballast size 40 mm including curing and compaction etc in1:4:8 mix 3 Brick work in foundation and plinth using brick of class designation 75 in CM 1:6 4 DPC with RCC 1:1:5:3 mix 5 Brick work in Superstructure using brick of class designation 75 in CM 1:6 6 reinforced cement concrete work including curing compaction , finishing with rendering in cement sand martar 1:3 and making goods and joints excluding cost of centering shutiering and reinforcement in 1:1:5:3 7 Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) in foundationand super structure up to 4.5m height aboveplinth level hot rolled deformed (IS: 1139) cold twisted (IS: 1786) bars 8 Centering and shuttering with plywood or steelsheets including strutting, propping, bracingboth ways with wooden members andremoval of from work 9 p&f cement concrete on roof 10 S&f Mosic tiles on roof 11 20mm thick plaster 1:6cm including curing and racking of joints. Etc. 12 Providing and applying white cement basedputty over plastered surface to prepare thesurface even and smooth complete (PWDBSR-2022 - Less-10%) 13 Finishing walls with Acrylic Smooth exteriorpaint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofing cementpaint) -(PWD BSR -2022 Less-10%) 14 Wall painting with plastic emulsion paint of required shade including all caffolding.New work ( Two or more coat incuding base coat ofwater proofing cement paint) -(PWD BSR-2022 Les-10%) 15 s&f iron door 16 fixing of iron door 17 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983): (PWD BSR-2022Less-10%) 18 s&f wire mesh on section window 19 s&f ironbars on section window 20 enamel painting on door and window 21 earth work in filling with ordinary soil 22 carriage of earth lead one km 23 Cement concrete in foundation and plinth with stone ballast size 40 mm including curing and compaction etc in1:6:12 mix 24 s&f polished kota stone flooring 25 s & f glaze tiles on wall 26 sok pit Earthwork in foundation excavation up to1.5m, ramming bressing both sides backfilling and dosposal of surplus soil within lead of 50m 27 Brick work in foundation and plinth using brick of class designation 75 in CM 1:6 in cm 1:6- 112mm thick 28 brick work in foundation and plinth using brick of class designation -75 in cm 1:6 29 20mm thick plaster 1:6cm including curing and racking of joints. Etc. 30 reinforced cement concrete work including curing compaction , finishing with rendering in cement sand martar 1:3 and making goods and joints excluding cost of centering shutiering and reinforcement in 1:1:5:3 31 Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) in foundationand super structure up to 4.5m height aboveplinth level hot rolled deformed (IS: 1139) cold twisted (IS: 1786) bars 32 wiring for fan/light pinots in pvc condut pipe as per specification 33 wiring for circuit /submain as per specification 34 s&f pvc water storage tank 35 s&f bib cock 36 s&f wash basin 37 providing and fixing chlorinated polyvinyl chloride pipes having thermal stability for hot and cool water supplyincluding at all CPVC plain &brass threaded fitting i/c fixing the pipe with clamps at 1 metr spacing . This including joints of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge 20mm normal size 38 s&f fully way value 20mm 39 s&f sink 40 providing and fixing granite stone slab mirror polished and machine edge cut in walls pillers step shelvers sillsabove 3600cm tiles 41 s&f urinal 42 s&f pvc pipe 110 mm 43 s&f europain wc plan 44 s&f cistern 45 yojna board and contingency charges 46 between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 80mm dia
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
6.
Rural Development #10759985 Price Bid
E Tender Notice No.05 For 2021-2022 Work No.1 Supplying Of Various Building Materials For Various Work For Financial Year 2021-2022 At Mukane Tal.Igatpuri Dist.Nashik , Metal 10Mm , Metal 20Mm , Metal 30Mm , Metal 40Mm , Metal 60Mm , Dabur ( Stone ) , Artificial Sand , Wash Sand , Bricks , Powder ( Dust ) , Murum , River Sand , Grit , Rmc , Cement Sheet ( Charminar ) , Angle , Channel , I-Beam , G.P Pipe , M.S Pipe , Indian Pan , Washbasin , Steel Sink , Steel ( Kapila Isi ) , Cement ( Ultratech Cement ) , Cement ( Birla Gold ) , Spartex ( 16X16 ) , Spartex ( 2 X 2 ) , Glaze Blocks ( Tiles ) , Ironwindows , R.C.C Net , Simple Net , Cement Frame , Kadappa , Marble , P.V.C Pipe , Door & Plywood , Winding Wire , Rough Tile , Polish Tile , Neeru , Birla White Cement , Birla Wall Putti , Paver Block , Cement , M.S Steel , M.S Angle , A.C Sheet , Colour Coated Sheet , G.I Sheet , Tata Steel ( Tiscon ) , Floor Tiles ( 16X16 / 2X2 / 32X32 / 4X2 ) , Wall Tiles , Elivation Tiles , R.C.C Door Frame , Orrisa Pan , Ewc Pan , R.C.C Window , M.S Grill , Polish Stone , Ruff Stone , Chain Link Wire , Barbed Wire , R.C.C Pole , Cement Roofing Sheets , Polycarbonate Sheets , Plain G.I Sheets , Crimped Ridges , Plain Ridges , Cement Ridges , Coating Doors , Pvc Bathroom Doors , Aluminium Door Frame , Laminate Door , Pvc Fiber Doors , Solid Pvc Doors , Memron Doors , Metal Doors , Flush Doors , Wooden Doors , Cement Frame With Cement Sheet , Cement Frame , Wooden Frame , Cement Pole , Commercial Plywood , Waterproof Plywood , Black Board , Ambuja Cement , Gypsum Aapu , Gypsum Suryadarshan , Cement Window , Sliding Window With Grill , Wood Window , Ms Channel , Ms Beam , Ms T Angle , Ms L Angle , Steel Bar , Compound Wire Bundle , Compound Net-Ms & Gi , Vitrified Tiles , Parking Tiles , Limestone , Kithchen Sink ( Light & Heavy ) , Commode ( Ewc & Anglow Indian ) , Door Set , Screw Ms & Ss , Hinges , Foundation Bold , Nails , Hook , Favicol , Telscopy , Welding Rod , Cutter Wheel , Binding Wire , P.V.C Pipe 8 Inch , P.V.C Pipe 3 Inch , Water Tank 1000 Litres , Colour / Paint , Brush , Chuka , M.S. Pipe , Kapachi , Write Cement , Cement Cover , Iron Cover , Iron Sheet , Cement Frame , Glazed Tiles
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
Maharashtra View Result →
8.
Rural Development #10665092 Price Bid
Yearly Supply Of Construction Material Jan Suvidha Antargat Smashanshed And Concreting V Etar Kama Karita Lagnare Sahity At Gp Adegaon Ta Hingna Di Ngp-2 Soft Murum 3 Hard Murum 4 Bricks Red 5 Bricks White 6 Sand ( Kanhan ) 7 Sand ( Local ) 8 20Mm Metal 9 30 Mm Metal 10 40 Mm Metal 11 80 Mm Metal 12 Dust 13 Steel 6 Mm 14 Steel 8 Mm 15 Steel 10Mm 16 Steel 12Mm 17 Steel 16 Mm 18 Cement 53 Gred I.S.I. 19 J.C.B. 20 Kota Stone 21 Floor Tiles 22 Glaze Tiles 23 Mixure Machine 24 Vibratar 25 Roller 26 Rcc Cement Pipe 300 Mm 27 Rcc Cement Pipe 450 Mm 28 Rcc Cement Pipe 600 Mm 29 Rcc Cement Pipe 900 Mm 30 Water Tanker 4000 Liter 31 Water Tanker 24000 Liter 32 Fabrication Work 33 Paving Block 34 Three Siter Cement Chair 35 Information Bord 3*2 Squ Ft 36 Binding Tar 37 Paint 38 Sliding Window Aluminium With Glass 39 Water Tank 40 Khile 41 Centring
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
Maharashtra View Result →
10.
Defence #10647611 Price Bid
Work No . 212 Construction Of 04 Nos Bathroom Size 5 X 4 Each With Bricks Masonry Wall And Cgi Sheet Roofing And Glaze Tile In Floor And Wall Tiles
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Jammu And Kashmir View Result →
11.
Defence #10647605 Price Bid
Work No . 213 Construction Of 01 Toilet Block Consisting 03 Nos Toilet Size 5 X 4 Each With Bricks Masonry Wall And Cgi Roofing And Glaze Tiles In Floor And Wall Tiles At Bcs Roun Udhampur
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Jammu And Kashmir View Result →
12.
Rural Development #10604852 Price Bid
Supply Of Various Material For Various Works Year 2019-2020 / 2020-2021 At Dhargaon Tal . Igatpuri Dist . Nashik. :-Metal 20Mm ( Khadi ) , Metal 10Mm , Dabur ( Stone ) , Metal 30 / 40 / 60 / 80Mm , Artificial Sand , Wash Sand , Bricks , Powder ( Dust ) , Murum , River Sand , Grit , Rmc , Cement Sheet ( Charminar ) , Angle , Channel , I-Beam , G . P Pipe , M . S Pipe , G . P Pipe , M . S Pipe , Indian Pan , Washbasin , Steel Sink , Steel ( Kapila Isi ) , Cement ( Ultratech Cement ) , Cement ( Birla Gold ) , Spartex ( 16X16 ) , Spartex ( 2 X 2 ) , Glaze Blocks ( Tiles ) , Iron Windows , R . C . C Net , Simple Net , Cement Frame , Kadappa , Marble , P . V . C Pipe , Door & Plywood , Winding Wire , Rough Tile , Polish Tile , Neeru , Birla White Cement , Birla Wall Putti , Paver Block , Cement , M . S Steel , M . S Angle , A . C Sheet , Colour Coated Sheet , G . I Sheet , Tata Steel ( Tiscon ) , Floor Tiles ( 16X16 / 2X2 / 32X32 / 4X2 ) , Wall Tiles , Elivation Tiles , R . C . C Door Frame , Orrisa Pan , Ewc Pan , R . C . C Window , M . S Grill , Polish Stone , Ruff Stone , Chain Link Wire , Barbed Wire , R . C . C Pole , All Building Material Trades , Cement Roofing Sheets , Polycarbonate Sheets , Plain G . I Sheets , Crimped Ridges , Plain Ridges , Cement Ridges , Coating Doors , Pvc Bathroom Doors , Aluminium Door Frame , Laminate Door , Pvc Fiber Doors , Solid Pvc Doors , Memron Doors , Metal Doors , Flush Doors , Wooden Doors , Cement Frame With Cement Sheet , Cement Frame , Wooden Frame , Cement Pole , Commercial Plywood , Waterproof Plywood , Black Board , Ambuja Cement , Gypsum Aapu , Gypsum Suryadarshan , Cement Window , Sliding Window With Grill , Wood Window , Ms Channel , Ms Beam , Ms T Angle , Ms L Angle , Steel Bar , Compound Wire Bundle , Compound Net-Ms & Gi , Vitrified Tiles , Parking Tiles , Limestone , Kitchen Sink ( Light & Heavy ) , Commode ( Ewc & Anglow Indian ) , Door Set , Screw Ms & Ss , Hinges , Foundation Bold , Nails , Hook , Favicol , Telscopy , Welding Rod , Cutter Wheel , Binding Wire , P . V . C
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
13.
Rural Development #10583263 Price Bid
Providing Supplying And Erecting Various Material And Machinery And Labour Services For Fhtc At Grampanchayatmanerwadi-Haweli-2 40 / 60 Mm Metal 3 53Grade Cement 4 20Mm Metal 5 Crush Sand 6 Mrum 7 Pcc M-10 8 Pvc Coated Gi Wire 9 G.I. Pipe 15Mm Dia. Medium Type 10 G.I. Pipe 15Mm Dia. Heavy Type 11 G.I. Pipe 20Mm Dia. Medium Type 12 G.I. Pipe 20Mm Dia.Heavy Type 13 G.I. Pipe 25Mm Dia. Medium Type 14 G.I. Pipe 25Mm Dia. Heavy Type 15 G.I. Pipe 32Mm Dia. Medium Type 16 G.I. Pipe 32Mm Dia.Heavy Type 17 G.I. Pipe 40Mm Dia. Medium Type 18 G.I. Pipe 40Mm Dia. Heavy Type 19 G.I. Pipe 50Mm Dia. Medium Type 20 G.I. Pipe 50Mm Dia. Heavy Type 21 G.I. Pipe 65Mm Dia. Medium Type 22 G.I. Pipe 65Mm Dia. Heavy Type 23 G.I. Pipe 80Mm Dia. Medium Type 24 G.I. Pipe 80Mm Dia. Heavy Type 25 Pvc Nahani Trap 75 Mm 26 G.I.Clamps 100Mm To 150Mm 27 Pvc Nahani Trap 150 Mm 28 G.I.Clamps 12Mm To 32Mm 29 G.I.Clamps 40Mm To 80Mm 30 Anglo Indian W.C. Pan Colour 31 G.I.Fixtures 32 P.V.C. Cowl 100 Mm 33 G.I.Screws 30Mm 34 G.I.Screws 40Mm 35 G.I.Union 25Mm Dia. 36 Gully Trap Cover With Frame 37 Gun Metal Stop Tap With Crutch Wheel 20Mm 38 Gun Metal Stop Tap With Crutch Wheel 25Mm 39 Gun Metal Stop Tap With Crutch Wheel 15Mm 40 Gun Metal Stop Tap With Crutch Wheel 20Mm 41 C.I.Bend 75Mm Dia. 42 C.I.Bend 100Mm Dia. 43 C.I.Bip Tap 12Mm 44 C.I.Grating 150Mm Dia. 45 C.I.Grating 100Mm Dia. 46 C.I.Grating 75Mm Dia. 47 C.I.Brackets 48 C.I.Collers 100Mm Dia. 49 C.I.Copllers 75Mm Dia. 50 C.I.Cover 45*30 Cm With Frame 51 C.I.Cowl / Vent 100Mm Dia. 52 C.I.Cowl / Vent 150Mm Dia. 53 C.I.Cowl / Vent 75Mm Dia. 54 C.I.Hinged Cover With Frame 55 C.I.Man Hole Cover 50 Kg. 56 C.I.Man Hole Cover 75 Kg. 57 C.I.Man Hole Cover 100 Kg. 58 C.I.Man Hole Cover 175 Kg.Heavy ( 0.9*0.45M ) 59 C.I.Nahani Trap 100Mm Dia. ( 375Mm Long ) 60 C.I.Nahani Trap 75 To 80Mm Dia. ( 375Mm Long ) 61 C.I.100*75*300 Long Arm ( Wt. 6Kg ) Nahani Trap 62 C.I.Soil Pipe 100Mm Dia. 63 C.I.Soil Pipe 150Mm Dia. 64 C.I, Soil Pipe 75 To 80Mm Dia. 65 C.I.Shoe 75 Mm Dia. 66 C.I. Shoe 100 Mm Dia. 67 C.I.Shoe 150Mm 68 Ball Cock 15Mm Dia.P.V.C.Float 69 Ball Cock 25Mm Dia.P.V.C.Float 70 Ball Cock 40Mm Dia.P.V.C.Float 71 Ball Cock 50Mm Dia.P.V.C.Float 72 Bib Cock Stop Tap Brass Heavy 15Mm 73 Bib Cock Stop Tap Brass Heavy 20Mm 74 Bib Cockstop Tap Brass Heavy 25Mm 75 Bib Tap 12Mm Brass Medium 76 Colour Wash Hand Basin 55*40Cm 77 Colour Wash Hand Basin 63*45Cm 78 White Glazed Wash Basin 45*30Cm 79 White Glazed Wash Hand Basin 55*50Cm 80 P.V.C. Flexible Waste Pipe 32 Mm Dia 81 White Glazed Wash Hand Basin 63 X 45 Cm 82 Sink White Glazed 45*20*30Cm 83 Pedestal For Wash Basin ( Standard Size ) 84 C.C.Septic Tank 0.9M Dia. ( 2.5M Long ) 85 C.C.Septic Tank 1.20M Dia. ( 2.5M Long ) 86 C.I.Steps For Manhole 87 C.I.Cover With Frame ( Gully Trap ) 88 C.I.Plug Bend 150Mm Dia. 89 Clamp For G.I.Pipe 25Mm 90 Colour European Type W.C.Pan 91 European Type Glazed W.C.Pan 92 W.C.Pan Coloured Glazed 64Cm. ( Orissa ) 93 W.C.Pan White Glazed 58 Cm.Indian 94 W.C.Pan White Glazed 57.50 Cm ( Orissa ) 95 Fibre Flushing Tank For W.C. 96 Flushing Tank Automatic Urinal 10Ltr. C.I. 97 Flushing Tank Automatic Urinal 5Ltr. ( P.V.C. ) 98 Low Level Flush Pr. St. 10Ltr. 99 Flat Back Urinal 100 Stall Type Urinal 101 Lipped Type Urinal 102 Coloured Glazed Full Stall Urinal 103 Bleaching Powder 104 Potassium Permanganate 105 Nylon Brush 106 Duster 107 Plastic Bucket 108 Coir 109 Gunny Cloth 110 Kharata 111 Wheel Stop Tap Brass 15Mm 112 Wheel Stop Tap Brass 20Mm 113 Wheel Stop Tap Brass 25Mm 114 Socket Brass For 32Mm Tap 115 Socket Brass For 40Mm Tap 116 Socket Brass For 50Mm Tap 117 Socket Brass For 65Mm Tap 118 Socket For 100Mm Tap 119 Socket For 15Mm Tap 120 Socket For 20Mm Tap 121 Socket For 25Mm Tap 122 Socket For 32Mm Tap 123 Socket For 40Mm Tap 124 Socket For 50Mm Tap 125 Socket For 65Mm Tap 126 Socket For 80Mm Tap 127 Span Yarn 128 Strainer For 100Mm 129 Strainer For 40Mm 130 Strainer For 50Mm 131 Strainer For 80Mm 132 Strainer For 15Mm 133 Strainer For 20Mm 134 Strainer For 25Mm 135 Stone Ware Pipe 100Mm Dia. 136 Stone Ware Pipe 150Mm Dia. 137 Stone Ware Pipe 225Mm Dia. 138 Stone Ware Glazed Pipe Half Round 100Mm Dia. 139 Stop Tap Brass With Crunch Wheel 15Mm Dia. 140 Towel Rod With Clamps 16Mm Dia. 141 Mirror 40*50Cm. With Plastic Frame 142 Brass T Thimble Socket 32Mm Dia. 143 Brass Wheel Stop Tap 32Mm Dia. 144 Brass Wheel Stop Tap 40Mm Dia. 145 Brass Wheel Stop Tap 50Mm Dia. 146 Brass Wheel Stop Tap 65Mm Dia. 147 Brass Wheel Stop Tap 80Mm Dia. 148 Half Turn Flush Cock 25Mm Dia. 149 12Mm Flexible Inlet Pipe Connection 150 Bell Mouth Cover 100Mm Dia. 151 Box Chamber With Lock 0.6*0.45M 152 Brass Nozzle Pillar Tap 12Mm 153 Black Bakelite Seat To European Closer 154 Concussion Push Button Type Gun Metal Tap 15 To 25Mm Dia. 155 Coupling Cast Iron 100Mm Dia. 156 Coupling Cast Iron 80Mm Dia. 157 Chromium Plated 12Mm Dia.Bib Cock 158 C.I.Trap Grating 15*10 Cm 159 C.I.Y Junction 100Mm Dia. 160 C.I.Y Junction 150Mm Dia. 161 C.I.Y Junction 75Mm Dia. 162 Enameled Bend 40Mm Dia. 163 Ferrul For C.I.Pipr 100Mm 164 White Glazed Foot Rest Chequred 25*10 Cm 165 Half Round Earthware Pipe 100Mm ( 60Cm Long ) 166 Half Round Earthware Pipe 150Mm ( 60Cm Long ) 167 Jute Rope 168 Half Round Chaina Ware Pipe 100Mm ( 60Cm Long ) 169 Lead Pipe 32Mm Dia. 170 Mohagani Seat With Lid 171 Mosquito Proof Coupling 172 Non-Return Valve 15Mm For Water Meter 173 Non-Return Valve 25Mm For Water Meter 174 Non-Return Valve 20Mm For Water Meter 175 Piller Tap 12Mm Dia.Chromium Plated Heavy 176 P.Trap And Lead Pipe Upto 40Mm Dia. 177 Rubber Gasket ( 25, 28 And 20 Cm ) 178 Rubber Incertion 179 Rubberised Adhesive 180 Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) 181 Self Project Tap Brass Chromium Plated 15Mm 182 Sewer Trap 183 Shower Rose Chromium Plated Brass 10Cm 184 P.V.C. Pipe 15Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 185 P.V.C. Pipe 20Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 186 P.V.C. Pipe 25Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 187 P.V.C. Pipe 32Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 188 P.V.C. Pipe 40Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 189 P.V.C. Pipe 50Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 190 P.V.C. Pipe 60Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 191 P.V.C. Pipe 75Mm Dia.4 Kg / Cm2 Pressure ( Class Ii ) 192 P.V.C. 75 Mm Soil Pipe 6 Kg / Cm2 Pressure 193 P.V.C. Pipe 90Mm Dia.4 Kg / Cm2 Pressure ( Class Ii ) 194 P.V.C.Pipe 110Mm Dia.4Kg / Cm2 Pressure ( Class Ii ) 195 P.V.C. 110 Mm Rain Water Pipe 6Kg / Cm2 Pressure 196 P.V.C. 110 Mm Soil Pipe 6 Kg / Cm2 Pressure 197 P.V.C.Pipe 140Mm Dia.4Kg / Cm2 Pressure ( Class Ii ) 198 P.V.C.Pipe 160Mm Dia.4Kg / Cm2 Pressure ( Class Ii ) 199 P.V.C.Pipe 160Mm Dia.Soil Pipe 200 P.V.C.Pipe 160Mm Dia. Rain Water Pipe 201 P.V.C.Socket 15Mm Dia. 202 P.V.C.Socket 20Mm Dia. 203 P.V.C.Socket 25Mm Dia. 204 P.V.C.Socket 32Mm Dia. 205 P.V.C.Socket 40Mm Dia. 206 P.V.C.Socket 50Mm Dia. 207 P.V.C.Socket 60Mm Dia. 208 P.V.C.Flushing Tank ( 12 Ltr. Capacity ) 209 Flush Valve 32Mm Dia. 210 Ferocret Tank 211 Stainless Steel Sink Of Size 600*510*200Mmof Nirali Or Equivalent Make 212 C.P.Pillar Cock Jaquar Make Continental ( Cat.No. Con-011 ) 213 C.P.Pillar Cock ( Isi ) Jaquar Make Continental 214 C.P.Pillar Cock Long Neck With Aerator Jaquar Make Continental ( Cat.No. Con- 021 ) 215 C.P.Bib Cock ( Isi ) Jaquar Make Continental ( Cat.No. Con-037 ) 216 C.P.Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) 217 C.P.2-Way Bib Cock Jaquar Make Continental ( Cat.No. Con-041 ) 218 C.P.Bib Cock With Wall Flange Long Thread Jaquar Make Continental ( Cat.No. Con- 047 ) 219 C.P.Bib Cock With Nozzle Jaquar Make Continental ( Cat.No. Con-049 ) 220 C.P.Angular Stop Cockjaquar Make Continental ( Cat.No. Con-053 ) 221 C.P.Angular Stop Cock Long Thread Jaquar Make Continental ( Cat.No. Con-055 ) 222 C.P.Angular Stop Cock With Wall Flange Jaquar Make Continental ( Cat.No. Con- 059 ) 223 C.P.Central Hole Basin Mixer Without Popup Waste System With 450Mm Long Braided Hoses Jaquar Make Continental ( Cat.No. Con-167B ) 224 C.P.Wall Mixer With Telephone Shower Arragnementonly But Without Teltphone Shower Crutch Jaquar Make Continental ( Cat.No. Con-217 ) 225 C.P.Wall Mixer Non-Telephonic Shower Arrangement Jaquar Make Continental ( Cat.No. Con-219 ) 226 C.P.Wall Mixer ( Wall Mounted Model ) With Telephone Shower Arrangement Only And With Telephone Shower Crutch Jaquar Make Continental ( Cat.No. Con-267 ) 227 C.P.Wall Mixer With Provision For Overheadshower With 115Mm Long Bend Pipe And Wall Flange Jaquar Make Continental ( Cat.No. Con-273Upr ) 228 C.P.Sink Mixer With Swinging Casted Spout ( Wallmounted ) Jaquar Make Continental ( Cat.No. Con-309 ) 229 C.P.Sink Mixer Swinging Spout ( Table Mounted Model ) 450Mm Long Braided Hoses Jaquar Make Continental ( Cat.No. Con-309B ) 230 C.P.Sink Cock With Swinging Casted Spout Jaquar Make Continental ( Cat.No. Con- 347 ) 231 C.P.Sink Cock With Raised J Shaped Swinging Casted Spout ( Table Mounted ) Jaquar Make Continental ( Cat.No. Con- 359 ) 232 C.P.Shower Arm 190Mm Long Light Body With Wallflange Jaquar Make Continental ( Cat. No. Sha - 477 ) 233 C.P.Flush Cock With Wall Flange 25Mm With Plain Knob Jaquar Make Continental ( Cat.No. Flr 6081 ) 234 C.P.Towel Rail 24 Jaquar Make Continental ( Cat. No. Acn 1111N ) 235 C.P.Towel Ring Square Jaquar Make Continental ( Cat. No. Acn 1121N ) 236 C.P.Soap Dish Hooker Jaquar Make Continental ( Cat. No. Akb 35731 ) 237 C.P.Soap Dish ( Polyurethane ) Jaquar Make Continental ( Cat. No. Aqn 7733 ) 238 C.P.Toilet Paper Holder Jaquar Make Continental ( Cat. No. Aq 7751 ) 239 C.P.Toilet Rack 24With Lower Hanger Jaquar Make Continental ( Cat. No. Acn 1181N ) 240 C.P.Handshower ( Health Faucet ) 1M.Pvc Tube With Wall Hook Jaquar Make ( Cat. No. Ald 563 ) 241 C.P.Pillar Cock Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7011 ) 242 C.P.Bib Cock With Wall Flange Aqua Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt7037 ) 243 C.P.2-Way Bib Cock With Wall Flange Aqua Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7041 ) 244 C.P.Angular Stop Cock With Wall Flange Aqua Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7053 ) 245 C.P.Central Hole Basin Mixer With Regular Spout Without Popup Waste System With 450Mm Longbraided Hoses Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7167Bb ) 246 C.P.Central Hole Basin Mixer With Regular Spout With Popup Waste System With 450Mm Longbraided Hoses Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7169B ) 247 C.P.Central Hole Basin Mixer With Small Spout Without Popup Waste System With 450Mm Longbraided Hoses Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7171B ) 248 C.P.Wall Mixer ( Wall Mounted Model ) With Telephonic Shower Arrangement Only But Without Crutchjaquar Make QueenS Collection ( Quarter Turn Filling ) ( Cat. No. Qqt 7217 ) 249 C.P.Wall Mixer Non-Telephonic Shower System Jaquar Make QueenS Collection ( Quarter Turn Filling ) ( Cat. No. Qqt 7219 ) 250 C.P.Wall Mixer ( Wall Mounted Model ) With Telephonic Shower Arrangement Only And With Telephone Shower Crutch Jaquar Make QueenS Collection ( Quarter Turn Filling ) ( Cat. No. Qqt 7267 ) 251 Hydraulic Door Closer 252 Cpvc Pipe 15Mm Dia. 253 Cpvc Pipe 20Mm Dia. 254 Cpvc Pipe 25Mm Dia. 255 Cpvc Pipe 32Mm Dia. 256 Cpvc Pipe 40Mm Dia. 257 Cpvc Pipe 50Mm Dia. 258 Cpvc Coupling For 15Mm Dia. 259 Cpvc Coupling For 20Mm Dia. 260 Cpvc Coupling For 25Mm Dia. 261 Cpvc Coupling For 32Mm Dia. 262 Cpvc Coupling For 40Mm Dia. 263 Cpvc Coupling For 50Mm Dia. 264 Elbow 90 Degree For 15Mm Dia. 265 Elbow 90 Degree For 20Mm Dia. 266 Elbow 90 Degree For 25Mm Dia. 267 Elbow 90 Degree For 32Mm Dia. 268 Elbow 90 Degree For 40Mm Dia. 269 Elbow 90 Degree For 50Mm Dia. 270 Tee For 15Mm Dia. 271 Tee For 20Mm Dia. 272 Tee For 25Mm Dia. 273 Tee For 32Mm Dia. 274 Tee For 40Mm Dia. 275 Tee For 50Mm Dia. 276 End Cap For 15Mm Dia. 277 End Cap For 20Mm Dia. 278 End Cap For 25Mm Dia. 279 End Cap For 32Mm Dia. 280 End Cap For 40Mm Dia. 281 End Cap For 50Mm Dia. 282 Ball Cock For 15Mm Dia. 283 Ball Cock For 12Mm Dia. 284 Ball Cock For 25Mm Dia. 285 Ball Cock For 32Mm Dia. 286 Ball Cock For 40Mm Dia. 287 Araldite Adhesive 288 Ball Valves For 50Mm Dia. 289 Male Adapter ( Brass Threads ) For 15Mm Dia. 290 Male Adapter ( Brass Threads ) For 20Mm Dia. 291 Male Adapter ( Brass Threads ) For 25Mm Dia. 292 Male Adapter ( Brass Threads ) For 32Mm Dia. 293 Male Adapter ( Brass Threads ) For 40Mm Dia. 294 Male Adapter ( Brass Threads ) For 50Mm Dia. 295 Male Adapter ( Plastic Threads ) For 15Mm Dia. 296 Male Adapter ( Plastic Threads ) For 20Mm Dia. 297 Male Adapter ( Plastic Threads ) For 25Mm Dia. 298 Male Adapter ( Plastic Threads ) For 32Mm Dia. 299 Male Adapter ( Plastic Threads ) For 40Mm Dia. 300 Male Adapter ( Plastic Threads ) For 50Mm Dia. 301 Female Adapter ( Brass Threads ) For 15Mm Dia. 302 Female Adapter ( Brass Threads ) For 20Mm Dia. 303 Female Adapter ( Brass Threads ) For 25Mm Dia. 304 Female Adapter ( Brass Threads ) For 32Mm Dia. 305 Female Adapter ( Brass Threads ) For 40Mm Dia. 306 Female Adapter ( Brass Threads ) For 50Mm Dia. 307 Female Adapter ( Plastic Threads ) For 15Mm Dia. 308 Female Adapter ( Plastic Threads ) For 20Mm Dia. 309 Female Adapter ( Plastic Threads ) For 25Mm Dia. 310 Union For 15Mm Dia. 311 Union For 20Mm Dia. 312 Union For 25Mm Dia. 313 Union For 32Mm Dia. 314 Union For 40Mm Dia. 315 Union For 50Mm Dia. 316 Cross For 15Mm Dia. 317 Cross For 20Mm Dia. 318 Step Over Bend 15Mm Dia. 319 Step Over Bend 20Mm Dia. 320 Tee Holder For 15Mm Dia. 321 Tee Holder For 32Mm Dia. 322 End Plug Threaded For 15Mm Dia. 323 R.C.C.Chamber Cover With Frame 90Cm*45Cm Heavy Duty 225Kg 324 R.C.C.Chamber Cover With Frame 90Cm*45Cm Medium Duty 140Kg 325 R.C.C.Chamber Cover With Frame 60Cm*45Cm Heavy Duty 160Kg 326 R.C.C.Chamber Cover With Frame 60Cm*45Cm Medium Duty 100Kg 327 I.S.I.Ferrul Connection15mm Dia. 328 I.S.I.Ferrul Connection 20Mm Dia. 329 I.S.I.Ferrul Connection 25Mm Dia. 330 I.S.I.Ferrul Connection 32Mm Dia. 331 I.S.I.Ferrul Connection 40Mm Dia. 332 I.S.I.Ferrul Connection 50Mm Dia. 333 Water Meter 15 Mm Diameter 334 Water Meter 20 Mm Diameter 335 Water Meter 25 Mm Diameter 336 Water Meter 40 Mm Diameter 337 Water Meter 50 Mm Diameter 338 Water Meter 80 Mm Diameter 339 Water Meter 100 Mm Diameter 340 Non Return Valve 40 Mm Diameter 341 Non Return Valve 50 Mm Diameter 342 Non Return Valve 80 Mm Diameter 343 Non Return Valve 100 Mm Diameter 344 Colour Wash Hand Basin 0.45 X 0.30 345 White Glaze Earth Sink 0.6 X 0.2 X 0.45 346 Clamp For G.I.Pipe 200Mm 347 Earopean Type Glazed W.C.Pan 68Cm 348 Earopean White Glazed Earthen Ware Closet Pan 349 P.V.C. Nahni Trap 350 P.V.C. Connector. 15 Mm Dia 351 Low Level Flushing Cistern 352 Upvc Sanitary Pipes All 20 Mm Dia. 353 Upvc Sanitary Pipes All 75 Mm Dia. 354 Bib Cock Stop Tap Brass Heavy 15Mm 355 Stainless Steel Sink Of Size 610 X 460 X 200 Mm Of Nirali Or Equivalent Make 356 Upvc Sanitary Pipes All 63 Mm Dia. 357 W.C.Pan Colour Glazed 57.50 Cm ( Orissa ) 358 Piller Cock Mixer & Angle Cock 359 Upvc Sanitary Pipes All 25 Mm Dia. 360 Upvc Sanitary Pipes All 15 Mm Dia. 361 Cement 362 Upvc Sanitary Pipes All 40 Mm Dia. 363 Upvc Sanitary Pipes All 50 Mm Dia. 364 Stainless Steel Sink Of Size 470 X 420 X 178 Mm Of Nirali Or Equivalent Make 365 Bib Cock Long Arm 366 Bottletrap Wash Basin 32 Mm Cromium Plated 367 Upvc Sanitary Pipes All 32 Mm Dia. 368 Hamp Rope 369 Bib Cock Cock Stop Tap Brass Heavy 15 Mm 370 Colour Wash Hand Basin 45*30Cm 371 Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap 372 Ultra 250 Mm.Dia. Upvccover & Frame 373 Upvc Blanking Plug 110 Mm 374 Upvc 90 Degree Bend 375 Ultra Shaft 250X470mm 376 Water Jet With Accessories 377 White Glazed Full Stall Urinal 378 Glass Plain 6Mm Thick 379 White Glazed Earthenware Squatting Plate ( Ladies Urinal ) 380 Autoclosing Pillar Cock Of Pressmatic Tap 381 Pvc Aqua Kraft Type Super Bib Tap 15 Mm 382 Pvc Aqua Kraft Type Super Two Way Bib Tap 15 Mm 383 Super Push Button Type Cock / Tap With Flange 15 Mm 384 Pvc Aqua Kraft Type Super Jet Spray 15 Mm 385 Pvc Aqua Kraft Type Super Right Angle Stop Tap 386 Pvc Aqua Kraft Type Super Pillar Tap 15 Mm 387 Fixing In Cc Bk Clamp, Battan 388 Wall Mounted European Type Glazed W.C.Pan 389 Super Wall Sink Type Tap With Flange 15 Mm 390 Two Way Bib Tap With Flange 391 Super Jet Spray With Flange 2 In 1 Faucet 1.50 Metre Long 392 Chloryphyriphos 393 Solvent 394 D.D.V.P. 395 Malathion 396 Pine Oil 397 S.S. Pipe 40 Mm Dia 398 Mild Steel 399 Barbed Wire 400 Concentina Coil Wire 401 M.S.Steel 402 Rcc Pole 403 Green Marble 404 Telephone Black Granite 405 Karva ( For Roof And Sides 10Kg Bundle ) 406 Tatti 407 Bamboo 25Mm Dia. 408 Lightening Conductor 409 Salt 410 Copper Tape Width 25Mm*3Mm Thick 411 Aluminium Strips 50 Mm X 3 Mm 412 Cripped Wire3 - 0 , 4 - 0 And 5 - 0 Wide 413 Welding Electrodes 414 Welded Mesh 75 X 75 Mm 415 Welded Mesh 150 X 150 Mm 416 Tarat 36 Width ( Gunny Cloth ) 417 Chain Link3 - 0 , 4 - 0 And 5 - 0 Wide 418 Bamboo 50Mm Dia. 419 Hold Fast For Steel Gate 420 Nut Boldts 12 Mm Dia. / Nails All Size 421 M.S. Pipe 40 Mm Dia 422 Welding Rod 423 Pvc Hand Rail Cover 424 Antitermite Liquid 425 Lock For Drawer / Cupboard 426 Glycel 427 Hing 428 Hot Lime 429 Ladder 430 Fine Tooth Chisel 431 Saw 432 Gloves 433 Tractor Breaker 434 Inforamtion Board 435 Labour Services Skilled Labour 436 Labour Services Unskilled Labour 437 Mechanic 438 Lorry Driver / Mixer Operator 439 Welder / Driller - Skilled 440 Polishman - Semi Skilled 441 Assistant Plumber - Skilled 442 Maistry Skilled / Supervisor / Mate 443 Vibrator Operator - Skilled 444 Skilled Labour 445 Labour For Excavation In Hard Rock ( Un Blast ) 446 Mazdoor - For Polishing 447 Bhisti ( Mixing / Curing ) - Semi Skilled 448 Mukadam - Semi Skilled 449 Helper Un Skilled 450 Mazdoor - Unskilled Heavy Male 451 Mazdoor - Unskilled Heavy Female 452 Laboratory Assistant 453 Labour For Tile Turning 454 Excavator - Unskilled Heavy 455 Breaker - Semi Skilled 456 Jack Hammer Operator 457 Electrician 458 Welder Skilled 459 Labour For Traffic Regulation 460 Watchman 461 Compressor Operator / Driver 462 Supervisor / Mate 463 Blacksmith ( 1St Class ) Welder / Plumber / Electrician. 464 Blaster ( Stone Cutter ) 465 Mali 466 Mazdoor / Dresser ( Semi Skilled ) 467 Mazdoor / Dresser Sinker B116 Skilled 468 Medical Officer 469 Operator ( Grouting ) 470 Para Medical Personnel 471 Mazdoor Unskilled Female ( Light ) 472 Junior Engineer 473 Surveyor 474 Autocad Operator 475 Attendent 476 Computer Typist 477 Tracer 478 Total Station Operator 479 Senior Engineer 480 Assistant 481 Operator / Fitter 482 Mazdoor Unskilled Light Male 483 Computer Operator 484 Survey Helper 485 Technician 486 Skilled Assistants-On The Site 487 Supervisor 488 Valuation Expert 489 Office Support Staff 490 Co-Ordinator 491 Senior Surveyor 492 Revenue Expert 493 Welder
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
14.
Rural Development #10573803 Price Bid
E-Tender Notice No-3 / 2021-2022 Providing And Supply Material For Grampanchayat Related Work Form Financial Year 2022-2023 At Khadakjamb Tal Chandwad , Supply Material For Grampanchayat Work , Cement , Cement Door Frame , Farashi Shahabadi Polish , Toilet Pot , Glaze Tiles , Sintex Door , Pever Block Rubber Mold , Steel 6Mm , Steel 8Mm , Steel10mm , Steel 12Mm , Steel 16Mm , Steel 20Mm , Steel 25Mm , Angle 2 , Gi Jali 2X2 , Gi Sheet , Structaral Steel , Cement Pipe 350Mm , Cement Pipe 450Mm , Cement Pipe 600Mm , Cement Pipe 800Mm , Aac Block 8 / 8 / 24 , Aac Block 9 / 8 / 24 , Aac Block 6 / 8 / 24 , Aac Block 4 / 8 / 24 , Sand , Metal , Murum , Bricks
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
Maharashtra View Result →
16.
Rural Development #10561127 Price Bid
Providing Supply Material For Grampanchayat Releted Work Financial Year 2020-2021 At Nimbale Tal Chandwad Providing Supply Material For Grampanchayat Releted Work Financial Year 2020-2021 At Nimbale Tal Chandwad Dist Nashik-1 Supply Material 2 Cement 3 Cement Door Frame 4 Farashi Shahabadi Polish 5 Toilet Pot 6 Glaze Tiles 7 Sintex Door 8 Pever Block ( Rubber Mould ) 9 Steel 6Mm 10 Steel 8Mm 11 Steel10mm 12 Steel 12Mm 13 Steel 16Mm 14 Steel 20Mm 15 Steel 25Mm 16 Angle 2 17 Gi Jali 2X2 18 Fly Ash Bricks 19 Square Pipe 20 Stone 21 Metal ( ????? ??? ) 22 Metal ( ????? ??? ) 23 Metal ( ?? Mm ) 24 Sand 25 Murum 26 Artificail Sand 27 Ceramic Style 28 Plastic Water Tank ( 10000Ltr 29 Pvc Pipe 7 30 Pvc Pipe 6 31 Pvc Pipe 8 32 Pvc Pipe 3 33 Pvc Pipe 4 34 Pvc Pipe 1.5 35 Pvc Pipe 1 36 Tees 4 37 Tees 6 38 Tees 7 39 Tees 8 40 Aac Block 8 / 8 / 24 41 Aac Block 9 / 8 / 24 42 Aac Block 6 / 8 / 24 43 Aac Block 4 / 8 / 24
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
17.
Rural Development #10561021 Price Bid
Supply Material For Grampanchayat Releted Work ( Financial Year 2020-2021 ) At Dhodambe Tal Supply Material For Grampanchayat Releted Work ( Financial Year 2020-2021 ) At Dhodambe TalChandwad Dist Nashik , Supply Material For Grampanchayat Work , Cement , Cement Door Frame , Farashi Shahabadi Polish , Toilet Pot , Glaze Tiles , Sintex Door , Pever Block Rubber Mold , Steel 6Mm , Steel 8Mm , Steel10mm , Steel 12Mm , Steel 16Mm , Steel 20Mm , Steel 25Mm , Angle 2 , Gi Jali 2X2 , Gi Sheet , Structaral Steel , Cement Pipe 350Mm , Cement Pipe 450Mm , Cement Pipe 600Mm , Cement Pipe 800Mm , Aac Block 8/8/24 , Aac Block 9/8/24 , Aac Block 6/8/24 , Aac Block 4/8/24
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
18.
Rural Development #10560838 Price Bid
Supply Material For Grampanchayat Releted Work ( Financial Year 2020-2021 ) At Paregaon Tal Chandwad Supply Material For Grampanchayat Releted Work ( Financial Year 2020-2021 ) At Paregaon Tal Chandwad Dist Nashik , Supply Material For Grampanchayat Work , Cement , Cement Door Frame , Farashi Shahabadi Polish , Toilet Pot , Glaze Tiles , Sintex Door , Pever Block Rubber Mold , Steel 6Mm , Steel 8Mm , Steel10mm , Steel 12Mm , Steel 16Mm , Steel 20Mm , Steel 25Mm , Angle 2 , Gi Jali 2X2 , Gi Sheet , Structaral Steel , Cement Pipe 350Mm , Cement Pipe 450Mm , Cement Pipe 600Mm , Cement Pipe 800Mm , Aac Block 8 / 8 / 24 , Aac Block 9 / 8 / 24 , Aac Block 6 / 8 / 24 , Aac Block 4 / 8 / 24 , Pvc Pipe 2 Inch , Pvc Pipe 2 . 5 Inch , Pvc Pipe 3 Inch , Pvc Pipe 4 Inch , Pvc Pipe 6 Inch , Pvc Pipe 8 Inch , Pvc Nahani Trap , Pvc Bend
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
Rajasthan View Result →
Maharashtra View Result →
21.
Housing Urban and Rular Development #10531348 Price Bid
Tender For Government Higher Secondary School Rampur Chakia, Partawal, Maharajganj In Maharajganj District Under Alankar Scheme, Civil Work ( Toilet Block ) Earth Work Excavation In Foundation In Ordinary Soil I / C S / O All Material & Labour T & P Etc Complete. L.C. In 1:4:8 C / S & 40Mm Stone Ballasti / C S / O All Material & Labour T & P Etc Complete. B / Work 1:4 C, C / S Mortar In Foundation I / C S / O All Material & Labour T & P Etc Complete. Excavating, Supplying And Filling Of Local Earth ( Including Royalty ) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. R.C.C. Work In 1:1.5:3 C, C / S & 20Mm S / G Mortar I / C S / O All Material T & P Etc Complete ( Plinth Bend ) B / Work In 1:6 C, C / S Mortar In 230Mm Thick Wall Super Structure I / C All Material & Labour T & P Etc Complete. R.C.C. Work In 1:1.5:3 C, C / S & 20Mm S / G Mortar I / C S / O All Material T & P Etc Complete ( Lintel Bend ) Sunshade Slab B / Work In 1:4 C, C / S Mortar In 115Mm Thick Wall Super Structure Steel Renforcement Cutting Bending & Binding Etc Complete B / Work In 1:4 Cement C / Sand Mortar In Apron 15Mm Thick Plinth 1:6 Cement C / Sand Mortar I / C S / O All Material & Labour T & P Etc Complete. 15Mm Thick Plaster 1:6 Cement C / Sand Mortar Inner Side Of Building I / C All Material & Labour T & P Etc Complete. ( Inner Side ) 12Mm Thick Plinth 1:4 Cement C / Sand Mortar I / C All Material & Labour T & P Etc Complete ( Outer Side ) 6Mm Thick Plaster1:3 Cement C / Sand Mortar In Ceiling I / C All Material & Labour T & P Etc Complete. 40Mm Thick 1:2 Cement C / Sand Mortar In Beairng I / C All Material & Labour T & P Etc Complete. P.C.C Flooring 1:2:4 Cement C / Sand 20Mm S / G Mortar In I / C All Material & Labour T & P Etc Complete S / Fixing Of Glass Strip In Apron ( 22X4 ) Mm Thick Providing And Laying Of China White Glaged Tile Wall And Floor With 1:4 Cement C / S Mortar I / C S / O All Material And T & P Etc Complete Sand Filling In Floor I / C S / O All Material & Labour T & P Etc Complete. L.C. In 1:4:8 C / S & 40Mm Stone Ballast In Floor 20Mm Thick Roof Plaster 1:3C:C / S Mortar With Ncf Making Drip 1:2 Cement C / S Mortar I / C S / O All Material And T & P Etc Complete Fabrication Of M.S. Angle Iron Providing & Fixing Of Z Section Ventilator S / F Of Ceremic Glaze Wall / Floor Tiles 1:3 C:C / S Mortar I / C All Comt Chequered Terraro Tiles To 22Mm Thick Of Parking Tiles With 1:3 C: C / S I / C S / O All Material And Labour T & P Etc Complete. Providing And Fixing Of 30Mm Thick Isi Mark Flush Door Shutter I / C S / O All Material Labour T & P Etc Complete. Providing And Fixing Of Sliding Door Bolts With Required Colour Or Shade With Nuts Screws Etc Complete 250 X 16Mm Providing And Fixing Of Aluminium Tower Bolts With Required Colour Or Shade With Nuts Screws Etc Complete Providing And Fixing Of Handles Isi Mark Anodised With Required Colour Or Shade With Nuts Screws Etc Complete Providing And Applying White Cement Putty Of 1Mm Thickness Over Plastered Sufrace I / C S / O All Material Labour T & P Etc Complete. One Priming Coat Of Cement Primer And Two Coats Of All Bound Distemper On New Work I / C S / O All Material & Labour T & P Etc Complete Finishing Of Wall With Water Proofing Cement Paint Of Req Shade I / C S / O All Material & Labour T & P Etc Complete Apply Priming Coat Over New Steel And Other Metal Surface After And Including Preparing The Surface Throughly Cleaning Oil Grease Dirt And Other Foreigen Matter And Scoured With Wire Brushes, Fine Steel / Wood Scrappers Sand Papering And Knotting Including Cost Of All Materilas, Labour And T & P Etc. Required For Proper Completion Of The Work Two Coat Enamale Painting On Commercial Flush Door Shutter I / C S / O All Material & Labour T & P Etc Complete S / Fixing Of 4Mm Thick Pin Headed Glass Pans With Putty I / C S / O All Material & Labour T & P Etc Complete Providing & Fixing Of Sliding Door I / C All Fittings Complete. Providing & Fixing Of Pvc Door I / C All Fittings Complete. Providing And Injecting Chemical Imultion For Pre Construction Antitermite Treatment As Per Sprecification I / C S / O All Material Labour T & P Etc Complete. Providing & Fixing Of Stainless Steel 304 Railing I / C All Fittings Complete. Making Khurra 45X45 I / C S / O All Material And T & P Etc Complete. P / F Unplasticised Rigid Pvc Rwp 110Mm I / C S / O All Material And Labour T & P Etc Complete. Centering And Shuttering Of Beams Plinth Beam Lintel Beam Sunshade Centering And Shuttering Of Slab Sanitary- Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type ) With Seat And Lid, 10 Liter Low Level White Vitreous China Flushing Cistern & C.P. Flush Bend With Fitting & C.I. Brackets. 40Mm Flush Bend, Overflow Arrangement With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete I / C Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Providing And Fixing Water Closed Squatting Pan ( Indian Type W.C Pan ) With 100Mm Sand Cost Iron P Or S Trap, 10 Liter Low Level White P.V.C Flushing Cistern, I / C Flush Pipe Etc Complete. Providing & Fixing Wash Basin With 15Mm C.P Brass Pillar Cock I / C Cutting Making Good Of Wall Etc Complete. Providing & Fixing Of Flexible P.V.C West Pipe For Sink Or Wash Basin I / C All Fitting Complete. 32Mm Dia 40Mm Dia Providing & Fixing Urinal Basin With 5 Liter P.V.C. Automatic Flushing Cistern I / C All Fittings Complete. Providing & Fixing P.V.C Rain Water Down Pipe I / C All Fittings Complete. For 100Mm Dia Providing & Fixing Soil, Wast And Vent Pipes For 100Mm Dia P.V.C. Pipe Providing & Fixing P.V.C Coller For 100Mm Dia Providing & Fixing G.I. Pipe Complete With G.I. Fittings And Clamps, I / C Cutting Making Good Of Wall Etc Complete. 25Mm Dia Nominal Bore 32Mm Dia Nominal Bore 15Mm Dia Nominal Bore Providing & Placing On Polyethylene Water Storage Tank I / C All Fittings Complete. ( 1000 Litr. ) Providing & Fixing Cp Brass Bib Cock For 15Mm Dia Nominal Bore Providing & Fixing Of Brass Stop Cock For 15Mm Dia Nominal Bore Providing And Fixing 600X450mm Veveled Edge Mirror Of Superior Glass Complete With 6Mm Thick Hard Ground Fixed To Wooden Cleats With Cp Brass Screws & Washers. All Complete. Providing And Fixing N / Trap All Complete. Cutting Chases In Brick Masonry Walls For Following Diameter Sand Cast Iron / Centrifugally Cast ( Spun ) Iron Pipes And Making Good The Same With Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 12.5 Mm Nominal Size ) , Including Necessary Plaster And Pointing In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) : 100Mm Dia S.W. Pipe External Sewerage System- Making Soak-Pit 2.5M. Deep With 45X45 Cm Dry Brick Honey Comb Shaft With F.P.S Bricks And Pvc Drain Pipe Complete As Per Standard Design. Construction Septic Tank With Brick Work In Cement Mortar 1:4 Cement And 4 Course Sand Mortar I / C Floor And Cover Slab With Plaster 1:3 C, C / S I / C All Completion Of Work Etc Complete. Constructing Masonry Chamber 60X45x50 Cm, Inside In Brick Work In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) For Fire Hydrants, With C.I. Surface Box 350X350 Mm Top And 165 Mm Deep ( Inside ) With Chained Lid And Rcc Top Slab 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) , I / C Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand:10 Graded Stone Aggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design :With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 Istallation Of Submersible Pump 1.00 Hp With Boring Drinking Water- Providing Boring 110Mm Dia Providing / Lowring Of 110Mm Dia P.V.C. Pipe Providing / Laying 110Mm Dia P.V.C. Stainer Pipe Providing / Laying 32Mm Dia C.P.V.C. Lowering Pipe P / F 1.00Hp Submersible Pump With Controlled Pannel Board.Kriloshker / Crompton P / F End Cap 110Mm Dia P / F Nylone Filter. P / F Nylone Dori Providing Adhesive For Jointing P.V.C. Pipe Providing & Fixing Boring Cap 110Mm Providing & Fixing M.S. Clamp 32Mm Providing 2.50 Sqm Cable. Providing & Fixing Steel Wire Rope For Sumbercable Providing & Filling C / Sand In Boring Cartage Of Material Up To Site. Labour For Installation & Testing Of Pump Providing Of Filling Pvc Water Storage Tank Providing Of Angle Valve Complete Pvc Supply & Fixing Of 25Mm Cpvc Pipe 20Mm Cpvc Pipe Supply & Fixing Of Fitting Cpvc Pipe Installation & Making Connetion To Water Storage Tank & Required G.I. Pipe. Cost Of Brick Masonary Stand For Installation Water Storage Tank I / C B / W. L.C. Plaster And Fixing Glazed Tile Over Brick Work Complete. Cost Of R.O. Plant With Ciller 250Lph With Complete Installation Electrification Work Cost Of Electrical Work
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
22.
Housing Urban and Rular Development #10531345 Price Bid
Tender For Government Higher Secondary School, Sohawal Maharajganj In Maharajganj District Under Alankar Scheme, 1 Civil Work ( Toilet Block ) 2 Earth Work Excavation In Foundation In Ordinary Soil I / C S / O All Material & Labour T & P Etc Complete. 3 L.C. In 1:4:8 C / S & 40Mm Stone Ballasti / C S / O All Material & Labour T & P Etc Complete. 4 B / Work 1:4 C, C / S Mortar In Foundation I / C S / O All Material & Labour T & P Etc Complete. 5 Excavating, Supplying And Filling Of Local Earth ( Including Royalty ) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. 6 R.C.C. Work In 1:1.5:3 C, C / S & 20Mm S / G Mortar I / C S / O All Material T & P Etc Complete ( Plinth Bend ) 7 B / Work In 1:6 C, C / S Mortar In 230Mm Thick Wall Super Structure I / C All Material & Labour T & P Etc Complete. 8 R.C.C. Work In 1:1.5:3 C, C / S & 20Mm S / G Mortar I / C S / O All Material T & P Etc Complete ( Lintel Bend ) 9 Sunshade 10 Slab 11 B / Work In 1:4 C, C / S Mortar In 115Mm Thick Wall Super Structure 12 Steel Renforcement Cutting Bending & Binding Etc Complete 13 B / Work In 1:4 Cement C / Sand Mortar In Apron 14 15Mm Thick Plinth 1:6 Cement C / Sand Mortar I / C S / O All Material & Labour T & P Etc Complete. 15 15Mm Thick Plaster 1:6 Cement C / Sand Mortar Inner Side Of Building I / C All Material & Labour T & P Etc Complete. ( Inner Side ) 16 12Mm Thick Plinth 1:4 Cement C / Sand Mortar I / C All Material & Labour T & P Etc Complete ( Outer Side ) 17 6Mm Thick Plaster1:3 Cement C / Sand Mortar In Ceiling I / C All Material & Labour T & P Etc Complete. 18 40Mm Thick 1:2 Cement C / Sand Mortar In Beairng I / C All Material & Labour T & P Etc Complete. 19 P.C.C Flooring 1:2:4 Cement C / Sand 20Mm S / G Mortar Ini / C All Material & Labour T & P Etc Complete 20 S / Fixing Of Glass Strip In Apron ( 22X4 ) Mm Thick 21 Providing And Laying Of China White Glaged Tile Wall And Floor With 1:4 Cement C / S Mortar I / C S / O All Material And T & P Etc Complete 22 Sand Filling In Floor I / C S / O All Material & Labour T & P Etc Complete. 23 L.C. In 1:4:8 C / S & 40Mm Stone Ballast In Floor 24 20Mm Thick Roof Plaster 1:3C:C / S Mortar With Ncf 25 Making Drip 1:2 Cement C / S Mortar I / C S / O All Material And T & P Etc Complete 26 Fabrication Of M.S. Angle Iron 27 Providing & Fixing Of Z Section Ventilator 28 S / F Of Ceremic Glaze Wall / Floortiles 1:3 C:C / S Mortar I / C All Comt 29 Chequered Terraro Tiles To22mm Thick Of Parking Tiles With 1:3 C: C / Si / C S / O All Material And Labour T & P Etc Complete. 30 Providing And Fixing Of 30Mm Thick Isi Mark Flush Door Shutter I / C S / O All Material Labour T & P Etc Complete. 31 Providing And Fixing Of Sliding Door Bolts With Required Colour Or Shade With Nuts Screws Etc Complete 250 X 16Mm 32 Providing And Fixing Of Aluminium Tower Bolts With Required Colour Or Shade With Nuts Screws Etc Complete 33 Providing And Fixing Of Handles Isi Mark Anodised Withrequired Colour Or Shade With Nuts Screws Etc Complete 34 Providing And Applying White Cement Putty Of 1Mm Thickness Over Plastered Sufrace I / C S / O All Material Labour T & P Etc Complete. 35 One Priming Coat Of Cement Primer And Two Coats Of All Bound Distemper On New Work I / C S / O All Material & Labour T & P Etc Complete 36 Finishing Of Wall With Water Proofing Cement Paint Of Req Shade I / C S / O All Material & Labour T & P Etc Complete 37 Apply Priming Coat Over New Steel And Other Metal Surface After And Including Preparing The Surface Throughly Cleaning Oil Grease Dirt And Other Foreigen Matter And Scoured With Wire Brushes, Fine Steel / Wood Scrappers Sand Papering And Knotting Including Cost Of All Materilas, Labour And T & Petc. Required For Proper Completion Of The Work 38 Two Coat Enamale Painting Oncommercial Flush Door Shutter I / C S / O All Material & Labour T & P Etc Complete 39 S / Fixing Of4mm Thick Pin Headed Glass Pans With Putty I / C S / O All Material & Labour T & P Etc Complete 40 Providing & Fixing Of Sliding Door I / C All Fittings Complete. 41 Providing & Fixing Of Pvc Door I / C All Fittings Complete. 42 Providing And Injecting Chemical Imultion For Pre Construction Antitermite Treatment As Per Sprecification I / C S / O All Material Labour T & P Etc Complete. 43 Providing & Fixing Of Stainless Steel 304 Railingi / C All Fittings Complete. 44 Making Khurra 45X45 I / C S / O All Material And T & P Etc Complete. 45 P / F Unplasticised Rigid Pvc Rwp 110Mm I / C S / O All Material And Labour T & P Etc Complete. 46 Centering And Shuttering Of Beams Plinth Beam 47 Lintel Beam 48 Sunshade 49 Centering And Shuttering Of Slab 50 Sanitary-Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type ) With Seat And Lid, 10 Liter Low Level White Vitreous China Flushing Cistern & C.P. Flush Bend With Fitting & C.I. Brackets. 40Mm Flush Bend, Overflow Arrangement With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete I / C Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required 51 Providing And Fixing Water Closed Squatting Pan ( Indian Type W.C Pan ) With 100Mm Sand Cost Iron P Or S Trap, 10 Liter Low Level White P.V.C Flushing Cistern, I / C Flush Pipe Etc Complete. 52 Providing & Fixing Wash Basin With 15Mm C.P Brass Pillar Cock I / C Cutting Making Good Of Wall Etc Complete. 53 Providing & Fixing Of Flexible P.V.C West Pipe For Sink Or Wash Basin I / C All Fittingcomplete. 32Mm Dia 54 40Mm Dia 55 Providing & Fixing Urinal Basin With 5 Liter P.V.C. Automatic Flushing Cistern I / C All Fittings Complete. 56 Providing & Fixing P.V.C Rain Water Down Pipe I / C All Fittings Complete. For 100Mm Dia 57 Providing & Fixing Soil, Wast And Vent Pipesfor 100Mm Dia P.V.C. Pipe 58 Providing & Fixing P.V.C Collerfor 100Mm Dia 59 Providing & Fixing G.I. Pipe Complete With G.I. Fittings And Clamps, I / C Cutting Making Good Of Wall Etc Complete. 25Mm Dia Nominal Bore 60 32Mm Dia Nominal Bore 61 15Mm Dia Nominal Bore 62 Providing & Placing On Polyethylene Water Storage Tank I / C All Fittings Complete. ( 1000 Litr. ) 63 Providing & Fixing Cp Brass Bib Cock For 15Mm Dia Nominal Bore 64 Providing & Fixing Of Brass Stop Cock For 15Mm Dia Nominal Bore 65 Providing And Fixing 600X450mm Veveled Edge Mirror Of Superior Glass Complete With 6Mm Thick Hard Ground Fixed To Wooden Cleats With Cp Brass Screws & Washers. All Complete. 66 Providing And Fixing N / Trap All Complete. 67 Cutting Chases In Brick Masonry Walls For Following Diameter Sand Cast Iron / Centrifugally Cast ( Spun ) Iron Pipes And Making Good The Same With Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 12.5 Mm Nominal Size ) , Including Necessary Plaster And Pointing In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) :100Mm Dias.W. Pipe 68 External Sewerage System- Making Soak-Pit 2.5M. Deep With 45X45 Cm Dry Brick Honey Comb Shaft With F.P.S Bricks And Pvc Drain Pipe Complete As Per Standard Design. 69 Construction Septic Tank With Brick Work In Cement Mortar 1:4Cement And 4 Course Sand Mortar I / C Floor And Cover Slab With Plaster 1:3 C, C / S I / C All Completion Of Work Etc Complete. 70 Constructing Masonry Chamber 60X45x50 Cm, Inside In Brick Work In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) For Fire Hydrants, With C.I. Surface Box 350X350 Mm Top And 165Mmdeep ( Inside ) Withchainedlidandrcctopslab 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate20mmnominalsize ) , I / Cnecessaryexcavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand:10 Gradedstoneaggregate40mmnominalsize ) Andinside Plasteringwithcementmortar1:3 ( 1Cement:3Coarse Sand ) 12Mmthick, Finishedwithafloatingcoatofneat Cementcompleteasperstandarddesign:Withcommon Burntclayf.P.S. ( Nonmodular ) Bricksofclassdesignation7.5 71 Istallation Of Submersible Pump 1.00 Hp With Boring 72 Drinking Water- Providing Boring 110Mm Dia 73 Providing / Lowring Of 110Mm Dia P.V.C. Pipe 74 Providing / Laying 110Mm Dia P.V.C. Stainer Pipe 75 Providing / Laying 32Mm Dia C.P.V.C. Lowering Pipe 76 P / F 1.00Hp Submersible Pump With Controlled Pannel Board.Kriloshker / Crompton 77 P / F End Cap 110Mm Dia 78 P / F Nylone Filter. 79 P / F Nylone Dori 80 Providing Adhesive For Jointing P.V.C. Pipe 81 Providing & Fixing Boring Cap 110Mm 82 Providing & Fixing M.S. Clamp 32Mm 83 Providing 2.50 Sqm Cable. 84 Providing & Fixing Steel Wire Rope For Sumbercable 85 Providing & Filling C / Sand In Boring 86 Cartage Of Material Up To Site. 87 Labour For Installation & Testing Of Pump 88 Providing Of Filling Pvc Water Storage Tank 89 Providing Of Angle Valve Complete Pvc 90 Supply & Fixing Of 25Mm Cpvc Pipe 91 20Mm Cpvc Pipe 92 Supply & Fixing Of Fitting Cpvc Pipe 93 Installation & Making Connetion To Water Storage Tank & Required G.I. Pipe. 94 Cost Of Brick Masonary Stand For Installation Water Storage Tank I / C B / W. L.C. Plaster And Fixing Glazed Tile Over Brick Work Complete. 95 Cost Of R.O. Plant With Ciller 250Lph With Complete Installation 96 Electrification Work 97 Cost Of Electrical Work .
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
23.
Rural Development #10518353 Price Bid
Supply Material For Grampanchayat Releted Work ( Financial Year 2020-2021 ) At Khadkjamb Tal Chandwad Supply Material For Grampanchayat Releted Work ( Financial Year 2020-2021 ) At Khadkjamb Tal Chandwad Dist Nashik , Supply Material For Grampanchayat Work , Cement , Cement Door Frame , Farashi Shahabadi Polish , Toilet Pot , Glaze Tiles , Sintex Door , Pever Block Rubber Mold , Steel 6Mm , Steel 8Mm , Steel10mm , Steel 12Mm , Steel 16Mm , Steel 20Mm , Steel 25Mm , Angle 2 , Gi Jali 2X2 , Gi Sheet , Structaral Steel , Cement Pipe 350Mm , Cement Pipe 450Mm , Cement Pipe 600Mm , Cement Pipe 800Mm , Aac Block 8/8/24 , Aac Block 9/8/24 , Aac Block 6/8/24 , Aac Block 4/8/24 , Pvc Pipe 2 Inch , Pvc Pipe 2 . 5 Inch , Pvc Pipe 3 Inch , Pvc Pipe 4 Inch , Pvc Pipe 6 Inch , Pvc Pipe 8 Inch , Pvc Pipe 9 Inch , Pvc Pipe 10 Inch , Pvc Pipe 11 Inch , Pvc Pipe 12 Inch , Pvc Nahani Trap , Pvc Bend
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
Maharashtra View Result →
25.
Rural Development #10456731 Price Bid
Supply Of Material Grampanchayat Hardoli R. Tal Kuhi , 80 Mm Metal Rabber M , 40 Mm Metal Hand Broken , 40 Mm Metal Crusher , 20 Mm Metal , 10Mm / 12Mm , 6Mm ( Churi ) , Sand , Stone Dust , Binding Tar , Bricks , Rcc Pipe 250Mm , Rcc Pipe 300Mm , Rcc Pipe 450Mm , Rcc Pipe 600Mm , Rcc Pipe 800Mm , Rcc Pipe 900Mm , Rcc Pipe 1000Mm , Rcc Pipe 1200Mm , Chekar Tiles , Pvc Pipe 75 Mm 6 Kg , Pvc Pipe 90 Mm 6 Kg , Colour Glazes Tiles , Ceramik Tiles , Sintex Tank , Steel Window , Steel Ventilator , Frp Door , 25Mm Partical Bord Door , Iron Angle , Iron Steel ( Tin Patra ) , Cemet Isi 53 Grade , Murum , Steel 6 Mm , Steel 8 Mm , Steel 10 Mm , Steel 12 Mm , Steel 16 Mm , Steel 18 Mm , Pever Block , Fiber Sheet , Iron Pipe 4 Kg , Gi Sluice Valve 75 Mm Isi Mark , Gisluice Valve 90 Mm Isi Mark , Gi Pipe 75 Mm 6 Kg , Gi Pipe 90 Mm 6 Kg
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Maharashtra View Result →
26.
Rural Development #10454396 Price Bid
Providing Supply Material For Grampanchayat Releted Work Financial Year 2020-2021 At Kajisangavi Tal Chandwad Dist Nashik-2 Cement 3 Cement Door Frame 4 Farashi Shahabadi Polish 5 Toilet Pot 6 Glaze Tiles 7 Sintex Door 8 Pever Block (Rubber Mould) 9 Steel 6mm 10 Steel 8mm 11 Steel10mm 12 Steel 12mm 13 Steel 16mm 14 Steel 20mm 15 Steel 25mm 16 Angle 2 17 GI Jali 2x2 18 Fly Ash Bricks 19 Square Pipe 20 Stone 21 Metal (????? ???) 22 Metal (????? ???) 23 Metal (?? mm) 24 Sand 25 Murum 26 Artificail Sand 27 Ceramic Style 28 Plastic Water Tank (10000ltr 29 PVC Pipe 7 30 PVC Pipe 6 31 PVC Pipe 8 32 PVC Pipe 3 33 PVC Pipe 4 34 PVC Pipe 1.5 35 PVC Pipe 1 36 Tees 4 37 Tees 6 38 Tees 7 39 Tees 8 40 AAC Block 8/8/24 41 AAC Block 9/8/24 42 AAC Block 6/8/24 43 AAC Block 4/8/24
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
27.
Rural Development #10397627 Price Bid
Providing and Supplying various Different material and Machinery Servicesat Grampanchayat Gogalwadi Tal Haveli Dist Pune - Centering Oil 3 Plastic Cover Block 4 R.C.C.Jali 50mm thick 5 Plastizer (Rheobuild) 825 RMt. 6 Concrete Spacer Block 15 mm 7 Concrete Spacer Block 20 mm 8 Concrete Spacer Block 25 mm 9 Concrete Spacer Block 30 / 40 mm 10 Anticorrrisive Primer Coat 11 Swaling Coat 12 PVC Coated GI Wire 13 Repairs to cut ends and damages with special liquid epoxy 14 Epoxy paint 15 R.C.C.Jali 80mm thick 16 Bricks (Red) 17 AAC Block 600x200x100 mm 18 Jointing Mortar 19 Fly ash Bricks 20 Corner stone 38*20*30cm 21 Khandakies 22 Pin Header (Standard Size) 23 Hollow Blocks C.C.0.2*0.2*0.4M 24 Hollow Blocks C.C.0.1*0.2*0.4M 25 Hollow Block C C 0.30 x 0.20 x 0.15 26 Siporex Block 75x240x650 mm 27 GBP Build Fast plus 28 Siporex Block 100x240x650 mm 29 Siporex Block 200x240x650 mm 30 Bitumen (Compound) 31 Brick bats 32 Water proof compound I.S 33 Tar Felt B.H.I.S.I.3mm thick 34 Acrylic Polymer Modified waterproofing Powder 35 Acrylic Polymer Modified Liquid 36 Fibre Glass Mesh 37 Bitumen 85/25 Grade 38 Bitumen 85/25 Grade Cold Primer 39 Grit (Add Below 5.6) 40 Bitumen Felt 41 Polydee-TP40 Primer 42 Polydee-TP40 Primer 43 Polydee-LM 44 Polydee-LM 150mm width 45 Bituflex Cloesdcell foam 30x30 mm 46 AG 10 Granules 47 Polydee-MC 48 Polydee-41 sealant and polyseal 49 Polydee-11 50 Bitumen Pad 25mm thick 1.20 x 1.20 Mtr 51 Neeru / Sanala 52 White Putty (Cement) 53 Texture Material 54 Rough Shahabad 25 to 30mm thick 55 Rough Shahabad 40 to 45 mm thick 56 Polished Shahabad 25 to 30mm thick 57 Rough Shahabad 50 to 60mm thick 58 Polished Shahabad 40 to 50mm thick For step 59 Polished Shahabad Machine cut 25mm thick 60 Polished Shahabad for step25mm thick 61 Tandoor Polished 25mm thick (Machine cut) 62 Tandoor Polished 25mm thick (Hand Cut) 63 Tandoor Polished for steps25mm thisk 64 Black Kadappa (one side polish) (Machine cut) 25 mm thick 65 Black Kadappa (one side polish) (Machine cut) 35mm thick 66 Both Sides Polished Kadappastone 25mm thick 67 Kota stone (Machine cut) upto 25-30mm thick one side polished 68 Kota stone (Hand cut) upto 25-30mm thick one side polished 69 Kota stone for step polished) upto 25mm thick (1.2*0.3M) 70 Ceramic tiles 30*30cm 71 Ceramic Antiskid Flooring Tiles 30 x 30 cm 72 Ceramic Tiles for dado 30 cm x 30 cm 73 Ceramic Tiles for dado 30 x 45 cm 74 Heavy duty interlocking concrete block 60mm thick gray 300 kg/sq.cm. 75 Heavy duty interlocking concrete block 60mm thick coloured 300kg/sq.cm 76 Heavy duty interlocking concrete block 80mm thick gray 300kg/sq.cm 77 Heavy duty interlocking concrete block 80mm thick coloured 300kg/sq.cm 78 Heavy duty interlocking concrete block 80mm thick rubber mould glossy 400kg/sq.cm 79 Heavy duty interlocking concrete block 40mm thick colour 200 kg/sq.cm 80 Telephone Black Granite 81 Green marble 82 Vitrified tiles Glossy Size 590 to 605 mm* 590 to 605 mm*8 to 10mm 83 Vitrifiedmatt finish - size 590 to 605 mm* 590 to 605 mm *8 to 10mm 84 Vitrified rustic matt stone finish size 590 to 605mm *590 to 605mm*8 to 10mm 85 Vertified stone effect finish size 590 to 605mm* 590 to 605mm * 8 to 10mm 86 Calcet Powder 87 Black Oxide powder 88 Fevi Matt Chemical 10 Kg Bag 89 Marble chips 90 Heavy duty interlocking concrete block 60mm thick rubber mould glossy 400kg/sq.cm 91 Tremix Treatment 100 mm thick 92 Marble mosaic chequered tiles (gray) 93 Colour cement 94 Heavy Duty Designer come. tile for flooring 95 Heavy Duty Designer come. tile for Steps 96 PVC flooring 97 Ceramic Tiles for dado 30 x 60 cm 98 Marble (other than white makrana) 99 Kota stone (Hand cut) upto 45-55mm thick one side polished 100 Vitrifiedmatt finish - size 895 to 900 mm* 895 to 900 mm *10 to 12 mm 101 Bees wax 102 Coal Tar 103 Common Spirit 104 French Polish 105 Varnish 106 Malemaine Polish 107 C.C.T.W. Ballies 125 mm Diameter 108 Oil enamel paint/flat/glossy paint(ready mix) (with I.S.I. Mark) 109 Synthetic paint (ready mix) 110 Catonic emulsion paint 111 White oil paint 100ml pack tin 112 Red Oxide paint 113 Cement paint 114 Steel Primer 115 Primer for plaster surface 116 Putty 117 Boiled linseed oil 118 Linseed oil double boiled 119 Terpentine 120 Wood Primer 121 Brush for lettring 122 Brush for road marking 5cm 123 Brush for marking road 8cm 124 Brush for road marking 10cm 125 Lustre paint 126 Textured Synthetic paint 127 White lead paint 128 Birla wall care putty 129 Aluminium Paint 130 Plastic emulsion paint 131 Acraylic Emulsion Paint 132 Exterior Primer 133 Weather shield paint 134 Neel 135 Oil bound distemper 136 Red powder / Geru 137 Saras 138 Scrapping sand paper size (30 * 20cm) 139 Dry distemper 140 Chunam / White lime Powder 141 paint Luster Paint 142 Roller Brush 143 Royale Luxury Emulsion Paint 144 Country Teak Wood 145 Ghana teak wood 146 Teak Wood planks above 2.5 m length 147 Teak wood bidding 1/2 * 1/2 148 T.W.Balli 100 mm dia 149 Jungle wood (non teak) normal 150 Bamboo 25mm dia.(4.5 to 6m) 151 Bamboo 50mm dia. 152 Bamboo Matting 1.2*1.8m 153 Ply wood 12mm thick 154 Ply wood 6mm thick 155 Mica laminate as per ISI 0.1 mm thick 156 Face Veneel board 4 mm thick 157 Particle board B.W.P.Phinol bond 12mm thick 158 Particle board B.W.P.Phinol bond 19 mm thick 159 Formica 1.5 mm thick 160 Tower bolt brass oxidised 10 mm dia length 150 mm 161 Ferical 162 Ply wood 18mm thick Commercial 163 Teak wood battens 50 * 25mm 164 Teak wood batten 25 mm * 12 mm 165 Veneer 3.5 to 4 mm thick 166 Alluminium rod 25mm dia 167 A.C.Corrugated sheet 6mm thick 168 A.C.Sheet ridge 169 A.C.Sheet plain 4mm thick 170 G.C.I. Sheet (Corrugated) 22 BWG 171 G.C.I. Sheet (Corrugated) 24 BWG 172 G.I. Sheet (plain) 22 BWG 173 G.I. Sheet (plain) 24 BWG 174 G.I.Washers 175 G.I. J or L hooks 6 mm dia. 176 Nails iron all size 177 Mangalore tiles class AA 178 Mangalore Ridge / Hip tiles 179 Mangalore Glass tiles 180 Mangalore Pattern cowl Ventilator 181 G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured Sheet 182 G.I. Pre coated Ridge Sheet 183 Gypsum powder 184 Aluminium Alloy plate 2mm thick 185 Aluminium sheeting fixed with encapsuled lens type reflective sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable. 186 Plaster Of Paris 187 Decorative Board of Fibrous Plaster of Paris 12 to 15 mm 188 Acoustic Board 12 mm thick 189 Gypsum Board 12.5 mm thick 190 UPVC 3 layer trapezoidal 2.00 mm sheet 191 Light weight calcium silicate tile of size 595 x 595 mm of texture spin stone / cosmos / plain / Glode fine fissured. 192 Bioguard Board 16 mm 193 Ultima tile 194 Optra tile 195 Proflex Sheet 1 mm 196 Sky light 2 mm thick 197 Hanger rod 4mm thick 198 level Adjustment clip size 85x30x0.8mm 199 Dash fastener 12.5mm dia 50mm long 200 Soffit cleat 25mmx35mmx1.60mm 201 Wooden Screws with plastic rawl plugs 35mmx8mm 202 Light weight calcium silicate tiles of size 595x595mm of texture Spintone for Tegular edge ceiling 203 Plain Zinc Sheet 204 UPVC ridge/hip tiles 205 Hanger wire (2.68 mm dia), 1.82 m long 206 Dune edge tiles 207 Fine fissured edge tiles 208 Turbo ventilator 24 209 Tarat 36 width ( Gunny Cloth) 210 Wire glass 211 Fire wood 212 Precoated Galvanised Steel Plain Sheet 213 Connecting clip for supports 214 Dry wall screws 25 mm 215 Jointing Compound 216 Jointing Tape 217 Minaral Fibre board 600 x 600 mm 218 Perimeter Channel 80 x 8 mm 219 Screws 1 12 220 Screws 1/2 221 Rawal Plug 222 Plain Zinc Sheet 0.50 mm thick 223 Aldrop 300*16mm Chromium Plated 224 Aldrop Iron Oxidise 300*16mm 225 Aldrop Stainless steel 300*16mm 226 Handle 125mm M.S. Chromium Plated 227 Handle 150mm Brass Chromium plated (Rounded Shape) 228 Handle Alluminium 125 mm 229 Iron hinges chromium plated 125mm 230 But Hinges Alluminium 125mm 231 G.I.Screw 50mm 232 G.I.Screw 25mm 233 Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty) 234 Tower bolt Aluminium 10mm dia.length 250mm 235 Tower bolt Aluminium 10mm dia.length 200mm 236 Tower bolt M.S. Chromium plated 10mm dia,length 300mm 237 Tower bolt M.S. Chromium plated 10mm dia,length 200mm 238 Cold Rolled Steel Hollow Section Door frame 1829*610mm 239 Aluminium stay 25cm 240 Aluminium stay 30cm 241 Jali fly proof 242 Jali chicken mesh 243 Jali welded mesh 25*25* 13 Guage 244 Jali welded mesh 25*25* 11 Guage 245 Jali welded mesh 50*25 13 Guage 246 Jali welded mesh 50*25 11 Guage 247 Hold fast Iron 300*40*5mm 248 Sliding Door Bolt Stainless Steel 12mm dia. 250mm length 249 Glass plain 3mm 250 Glass plain 5mm 251 Glass obscured (bajara) 5mm 252 G.I. Nut Bolt 253 Housing box to rolling shutter 254 Mechanical Gear For Rolling Shutter 255 Mortice lock superior 256 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side 257 Iron washer 12mm to 16mm 258 Aluminium Section 259 Nylon / PVC Gasket 260 Alluminium Screw 32 x 6 mm, 25 x 6 mm 261 Concealed locking arrangement of 100 mm length for sliding window 262 Alluminium Grill 7.50 mm thick 263 Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark 264 Iron Oxidized sliding door bolt 200 mm length, 12 mm dia 265 Powder and Chemicals for colour anodizing process of alluminium sections 266 Lock for Sliding Shutter 267 All Bearing Roller 268 All Frame Rail Angle 269 Welding Electrodes 270 C.R.C. Sheet 271 Abstrone Butadyne Styrine (ABS) Door Shutter including Transportation 272 Puff Insulation 35-40 Kg/Cumt. Density 273 PVC Door Shutter 34 mm thick Factory Made Shutter 274 FRP Door Shutter 30 mm thick Factory Made Shutter 275 FRP Door Shutter 35 mm thick Factory Made Shutter 276 Bison Pannel 277 PVC factory made solid panel door shutter with stainless steel fixutres & fastening 278 PVC factory made flush door 30 mm with stainless steel fixutres & fastening 279 Sliding door bolt Chromium plated 250mm 280 Acrylic Plain Sheet 3 mm 281 Aldrop Stainless steel 300*16mm 282 Aldrop Stainless steel 250*16 mm 283 Handle 150mm Stainless Steel (Rounded Shape) 284 Handle 200mm Stainless Steel (Rounded Shape) 285 Stainless Steel Hinges - 100mm 14 gauge (Heavy Duty) 286 Stainless Steel Hinges - 125mm 14 gauge(Heavy Duty) 287 Housing box to rolling shutter 288 Mechanical Gear For Rolling Shutter 289 Door StopperStainless Steel 290 Tower Bolt Stainless Steel 200 mm 291 Tower Bolt Stainless Steel 250 mm 292 Sliding Door Bolt Stainless Steel 250 mm 293 Handle Stainless Steel 100 mm 294 Eye Hole Lens 295 Rolling Shutter 296 Ply Wood 297 Stainless steel hooks and eyes 200 mm 298 Steel Window 299 Powder Coating 300 Rubber Lining 301 Ply wood 9 mm thick 302 Laminated board double 12mm thick 303 Alluminium Section anodized 304 Handle iron oxidised 150 mm 305 Hinges iron oxidised 100 mm 306 T. W. Particle board, both face laminated 12 mm 307 Battens T.W. 70 x 45 mm 308 Nuts and Bolts 309 Plain FRP Sheet 22 B.W.G. 310 TW Runner (6 x 3) 311 Alluminium Screw 312 F Patti 313 Teak wood planks above 2.5m length 314 Vision Panel 315 Solid core shutter 35 mm thick with commercial veneer facing and phenol bonded 316 Oil Paint 317 Acrylic Plain Sheet 2 mm thick 318 Aluminium Sheet 24 B.W.G 319 Alluminium Section with Powder Coating 320 Concealed lock 321 Mosquito proof Nylone net 322 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side with bidding patty 323 G.I. Pipe 100mm dia. Medium type 324 G.I. Pipe 100mm dia. Heavy type 325 G.I. Pipe 15mm dia. Medium type 326 G.I. Pipe 15mm dia. Heavy type 327 G.I. Pipe 20mm dia. Medium type 328 G.I. Pipe 20mm dia.Heavy type 329 G.I. Pipe 25mm dia. Medium type 330 G.I. Pipe 25mm dia. Heavy type 331 G.I. Pipe 32mm dia. Medium type 332 G.I. Pipe 32mm dia.Heavy type 333 G.I. Pipe 40mm dia. Medium type 334 G.I. Pipe 40mm dia. Heavy type 335 G.I. Pipe 50mm dia. Medium type 336 G.I. Pipe 50mm dia. Heavy type 337 G.I. Pipe 65mm dia. Medium type 338 G.I. Pipe 65mm dia. Heavy type 339 G.I. Pipe 80mm dia. Medium type 340 G.I. Pipe 80mm dia. Heavy type 341 PVC Nahani Trap 75 mm 342 G.I.Clamps 100mm to 150mm 343 PVC Nahani Trap 150 mm 344 G.I.Clamps 12mm to 32mm 345 G.I.Clamps 40mm to 80mm 346 Anglo Indian W.C. Pan Colour 347 G.I.Fixtures 348 P.V.C. Cowl 100 mm 349 G.I.Screws 30mm 350 G.I.Screws 40mm 351 G.I.Union 25mm dia. 352 Gully trap cover with frame 353 Gun Metal stop tap with crutch wheel 20mm 354 Gun metal stop tap with crutch wheel 25mm 355 Gun metal stop tap with crutch wheel 15mm 356 Gun metal stop tap with crutch wheel 20mm 357 C.I.Bend 75mm dia. 358 C.I.Bend 100mm dia. 359 C.I.Bip tap 12mm 360 C.I.Grating 150mm dia. 361 C.I.Grating 100mm dia. 362 C.I.Grating 75mm dia. 363 C.I.Brackets 364 C.I.Collers 100mm dia. 365 C.I.Copllers 75mm dia. 366 C.I.Cover 45*30 cm with frame 367 C.I.Cowl / Vent 100mm dia. 368 C.I.Cowl / Vent 150mm dia. 369 C.I.Cowl / Vent 75mm dia. 370 C.I.Hinged Cover with frame 371 C.I.Man hole cover 50 kg. 372 C.I.Man hole cover 75 kg. 373 C.I.Man hole cover 100 kg. 374 C.I.Man hole cover 175 kg.Heavy (0.9*0.45m) 375 C.I.Nahani trap 100mm dia.(375mm long) 376 C.I.Nahani trap 75 to 80mm dia.(375mm long) 377 C.I.100*75*300 long arm (wt. 6kg)nahani trap 378 C.I.Soil pipe 100mm dia. 379 C.I.Soil pipe 150mm dia. 380 C.I,Soil pipe 75 to 80mm dia. 381 C.I.Shoe 75 mm dia. 382 C.I. Shoe 100 mm dia. 383 C.I.Shoe 150mm 384 Ball cock 15mm dia.P.V.C.FLOAT 385 Ball cock 25mm dia.P.V.C.FLOAT 386 Ball cock 40mm dia.P.V.C.FLOAT 387 Ball cock 50mm dia.P.V.C.FLOAT 388 Bib cock stop tap brass heavy 15mm 389 Bib cock stop tap brass heavy 20mm 390 Bib cockstop tap brass heavy 25mm 391 Bib tap 12mm brass medium 392 Colour wash hand basin 55*40cm 393 Colour wash hand basin 63*45cm 394 White glazed wash basin 45*30cm 395 White glazed wash hand basin 55*50cm 396 P.V.C. flexible Waste Pipe 32 mm dia 397 White Glazed Wash Hand Basin 63 x 45 cm 398 Sink white glazed 45*20*30cm 399 Pedestal for wash basin (standard size) 400 C.C.Septic tank 0.9m dia.(2.5m long) 401 C.C.Septic tank 1.20m dia.(2.5m long) 402 C.I.Steps for manhole 403 C.I.Cover with frame (Gully trap) 404 C.I.Plug Bend 150MM dia. 405 Clamp for G.I.pipe 25mm 406 Colour European type W.C.Pan 407 European type glazed W.C.pan 408 W.C.PAN Coloured glazed 64CM.(Orissa) 409 W.C.PAN White glazed 58 CM.Indian 410 W.C.PAN White glazed 57.50 CM (Orissa) 411 Fibre flushing tank for W.C. 412 Flushing tank automatic Urinal 10ltr. C.I. 413 Flushing tank automatic Urinal 5ltr. (P.V.C.) 414 Low level flush pr. St. 10ltr. 415 Flat back Urinal 416 Stall Type Urinal 417 Lipped type Urinal 418 Coloured glazed full stall Urinal 419 Bleaching Powder 420 Potassium Permanganate 421 Nylon Brush 422 Duster 423 Plastic Bucket 424 Coir 425 Gunny Cloth 426 Kharata 427 Wheel stop tap brass 15mm 428 Wheel stop tap brass 20mm 429 Wheel stop tap brass 25mm 430 Socket brass for 32mm tap 431 Socket brass for 40mm tap 432 Socket brass for 50mm tap 433 Socket brass for 65mm tap 434 Socket for 100mm tap 435 Socket for 15mm tap 436 Socket for 20mm tap 437 Socket for 25mm tap 438 Socket for 32mm tap 439 Socket for 40mm tap 440 Socket for 50mm tap 441 Socket for 65mm tap 442 Socket for 80mm tap 443 Span Yarn 444 Strainer for 100mm 445 Strainer for 40mm 446 Strainer for 50mm 447 Strainer for 80mm 448 Strainer for 15mm 449 Strainer for 20mm 450 Strainer for 25mm 451 Stone ware pipe 100mm dia. 452 Stone ware pipe 150mm dia. 453 Stone ware pipe 225mm dia. 454 Stone ware glazed pipe half round 100mm dia. 455 Stop tap brass with crunch wheel 15mm dia. 456 Towel rod with clamps 16mm dia. 457 Mirror 40*50cm. With plastic frame 458 Brass T Thimble Socket 32mm dia. 459 Brass wheel stop tap 32mm dia. 460 Brass wheel stop tap 40mm dia. 461 Brass wheel stop tap 50mm dia. 462 Brass wheel stop tap 65mm dia. 463 Brass wheel stop tap 80mm dia. 464 Half turn flush cock 25mm dia. 465 12mm flexible inlet pipe connection 466 Bell mouth cover 100mm dia. 467 Box chamber with lock 0.6*0.45m 468 Brass nozzle pillar tap 12mm 469 Black bakelite seat to european closer 470 Concussion push button type gun metal tap 15 to 25mm dia. 471 Coupling cast Iron 100mm dia. 472 Coupling cast Iron 80mm dia. 473 Chromium plated 12mm dia.bib cock 474 C.I.Trap grating 15*10 cm 475 C.I.Y junction 100mm dia. 476 C.I.Y junction 150mm dia. 477 C.I.Y junction 75mm dia. 478 Enameled bend 40mm dia. 479 Ferrul for C.I.pipr 100mm 480 White glazed foot rest chequred 25*10 cm 481 Half round earthware pipe 100mm(60cm long) 482 Half round earthware pipe 150mm(60cm long) 483 Jute Rope 484 Half round chaina ware pipe 100mm(60cm long) 485 Lead pipe 32mm dia. 486 Mohagani seat with lid 487 Mosquito proof coupling 488 Non-return valve 15mm for water meter 489 Non-return valve 25mm for water meter 490 Non-return valve 20mm for water meter 491 Piller tap 12mm dia.chromium plated heavy 492 P.Trap and lead pipe upto 40mm dia. 493 Rubber gasket (25, 28 and 20 cm) 494 Rubber Incertion 495 Rubberised adhesive 496 Salt glazed stone ware gully trap (150*150mm) 497 Self project tap brass chromium plated 15mm 498 Sewer trap 499 Shower rose chromium plated brass 10cm 500 P.V.C. pipe 15mm dia.10kg/cm2 pressure(class IV) 501 P.V.C. pipe 20mm dia.10kg/cm2 pressure(class IV) 502 P.V.C. pipe 25mm dia.10kg/cm2 pressure(class IV) 503 P.V.C. pipe 32mm dia.10kg/cm2 pressure(class IV) 504 P.V.C. pipe 40mm dia.10kg/cm2 pressure(class IV) 505 P.V.C. pipe 50mm dia.10kg/cm2 pressure(class IV) 506 P.V.C. pipe 60mm dia.10kg/cm2 pressure(class IV) 507 P.V.C. pipe 75mm dia.4 kg/cm2 pressure(class II) 508 P.V.C. 75 mm Soil Pipe 6 Kg/cm2 Pressure 509 P.V.C. pipe 90mm dia.4 kg/cm2 pressure(class II) 510 P.V.C.pipe 110mm dia.4kg/cm2 pressure (class II) 511 P.V.C. 110 mm Rain Water Pipe 6Kg/cm2 Pressure 512 P.V.C. 110 mm Soil Pipe 6 Kg/cm2 Pressure 513 P.V.C.pipe 140mm dia.4kg/cm2 pressure (class II) 514 P.V.C.pipe 160mm dia.4kg/cm2 pressure (class II) 515 P.V.C.pipe 160mm dia.Soil Pipe 516 P.V.C.pipe 160mm dia. Rain Water Pipe 517 P.V.C.Socket 15mm dia. 518 P.V.C.Socket 20mm dia. 519 P.V.C.Socket 25mm dia. 520 P.V.C.Socket 32mm dia. 521 P.V.C.Socket 40mm dia. 522 P.V.C.Socket 50mm dia. 523 P.V.C.Socket 60mm dia. 524 P.V.C.Flushing tank (12 ltr. Capacity) 525 Flush valve 32mm dia. 526 Ferocret tank 527 Stainless Steel sink of size 600*510*200mmof nirali or equivalent make 528 C.P.pillar cock jaquar make continental (Cat.No. CON-011) 529 C.P.pillar cock (ISI)jaquar make continental 530 C.P.pillar cock long neck with aerator jaquar make continental (Cat.No. CON- 021) 531 C.P.Bib cock (ISI)jaquar make continental (Cat.No. CON-037) 532 C.P.Bib Cock long thread jaquar make continental (Cat.No. CON-039) 533 C.P.2-way bib cock jaquar make continental (Cat.No. CON-041) 534 C.P.bib cock with wall flange long thread jaquar make continental (Cat.No. CON- 047) 535 C.P.Bib cock with nozzle jaquar make continental (Cat.No. CON-049) 536 C.P.Angular stop cockjaquar make continental (Cat.No. CON-053) 537 C.P.Angular stop cock long thread jaquar make continental(Cat.No. CON-055) 538 C.P.angular stop cock with wall flange jaquar make continental(Cat.No. CON- 059) 539 C.P.central hole basin mixer without popup waste system with 450mm long braided hoses jaquar make continental (Cat.No. CON-167B) 540 C.P.wall mixer with telephone shower arragnementonly but without teltphone shower crutch jaquar make continental (Cat.No. CON-217) 541 C.p.wall mixer non-telephonic shower arrangement jaquar make continental (Cat.No. CON-219) 542 C.P.wall mixer(wall mounted model) with telephone shower arrangement only and with telephone shower crutch jaquar make continental (Cat.No. CON-267) 543 C.P.wall mixer with provision for overheadshower with 115mm long bend pipe and wall flange jaquar make continental (Cat.No. CON-273UPR) 544 C.P.sink mixer with swinging casted spout (wallmounted) jaquar make continental (Cat.No. CON-309) 545 C.P.sink mixer swinging spout (table mounted model) 450mm long braided hoses jaquar make continental (Cat.No. CON-309B) 546 C.P.sink cock with swinging casted spout jaquar make continental (Cat.No. CON- 347) 547 C.P.sink cock with raised J shaped swinging casted spout (table mounted) jaquar make continental (Cat.No. CON- 359) 548 C.p.shower arm 190mm long light body with wallflange jaquar make continental (Cat. No. SHA - 477) 549 C.P.Flush cock with wall flange 25mm with plain knob jaquar make continental (Cat.No. FLR 6081) 550 C.P.Towel rail 24 jaquar make continental (Cat. No. ACN 1111N ) 551 C.P.Towel ring square jaquar make continental (Cat. No. ACN 1121N ) 552 C.P.Soap dish hooker jaquar make continental (Cat. No. AKB 35731 ) 553 C.P.soap dish (polyurethane)jaquar make continental (Cat. No. AQN 7733 ) 554 C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751) 555 C.P.Toilet rack 24with lower hanger jaquar make continental (Cat. No. ACN 1181N) 556 C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563) 557 C.P.Pillar cock jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7011 ) 558 C.P.Bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT7037 ) 559 C.P.2-way bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7041) 560 C.P.Angular stop cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7053) 561 C.P.central hole basin mixer with regular spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7167bB ) 562 C.P.central hole basin mixer with regular spout with popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7169b ) 563 C.P.central hole basin mixer with small spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7171B) 564 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only but without crutchjaquar make queens collection(quarter turn filling) (Cat. No. QQT 7217 ) 565 C.P.wall mixer non-telephonic shower system jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7219 ) 566 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only and with telephone shower crutch jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7267) 567 Hydraulic door closer 568 cPVC pipe 15mm dia. 569 cPVC pipe 20mm dia. 570 cPVC pipe 25mm dia. 571 cPVC pipe 32mm dia. 572 cPVC pipe 40mm dia. 573 cPVC pipe 50mm dia. 574 cPVC Coupling for 15mm dia. 575 cPVC Coupling for 20mm dia. 576 cPVC Coupling for 25mm dia. 577 cPVC Coupling for 32mm dia. 578 cPVC Coupling for 40mm dia. 579 cPVC Coupling for 50mm dia. 580 Elbow 90 Degree for 15mm dia. 581 Elbow 90 Degree for 20mm dia. 582 Elbow 90 Degree for 25mm dia. 583 Elbow 90 Degree for 32mm dia. 584 Elbow 90 Degree for 40mm dia. 585 Elbow 90 Degree for 50mm dia. 586 Tee for 15mm dia. 587 Tee for 20mm dia. 588 Tee for 25mm dia. 589 Tee for 32mm dia. 590 Tee for 40mm dia. 591 Tee for 50mm dia. 592 End cap for 15mm dia. 593 End cap for 20mm dia. 594 End cap for 25mm dia. 595 End cap for 32mm dia. 596 End cap for 40mm dia. 597 End cap for 50mm dia. 598 Ball cock for 15mm dia. 599 Ball cock for 12mm dia. 600 Ball cock for 25mm dia. 601 Ball cock for 32mm dia. 602 Ball cock for 40mm dia. 603 Araldite adhesive 604 Ball valves for 50mm dia. 605 Male adapter (Brass Threads) for 15mm dia. 606 Male adapter (Brass Threads) for 20mm dia. 607 Male adapter (Brass Threads) for 25mm dia. 608 Male adapter (Brass Threads) for 32mm dia. 609 Male adapter (Brass Threads) for 40mm dia. 610 Male adapter (Brass Threads) for 50mm dia. 611 Male adapter (Plastic Threads) for 15mm dia. 612 Male adapter (Plastic Threads) for 20mm dia. 613 Male adapter (Plastic Threads) for 25mm dia. 614 Male adapter (Plastic Threads) for 32mm dia. 615 Male adapter (Plastic Threads) for 40mm dia. 616 Male adapter (Plastic Threads) for 50mm dia. 617 Female adapter (Brass Threads) for 15mm dia. 618 Female adapter (Brass Threads) for 20mm dia. 619 Female adapter (Brass Threads) for 25mm dia. 620 Female adapter (Brass Threads) for 32mm dia. 621 Female adapter (Brass Threads) for 40mm dia. 622 Female adapter (Brass Threads) for 50mm dia. 623 Female adapter (Plastic Threads) for 15mm dia. 624 Female adapter (Plastic Threads) for 20mm dia. 625 Female adapter (Plastic Threads) for 25mm dia. 626 Union for 15mm dia. 627 Union for 20mm dia. 628 Union for 25mm dia. 629 Union for 32mm dia. 630 Union for 40mm dia. 631 Union for 50mm dia. 632 Cross for 15mm dia. 633 Cross for 20mm dia. 634 Step over Bend 15mm dia. 635 Step over Bend 20mm dia. 636 Tee holder for 15mm dia. 637 Tee holder for 32mm dia. 638 End plug threaded for 15mm dia. 639 R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg 640 R.C.C.Chamber cover with frame 90cm*45cm Medium Duty 140kg 641 R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg 642 R.C.C.Chamber cover with frame 60cm*45cm Medium Duty 100kg 643 I.S.I.Ferrul Connection15mm dia. 644 I.S.I.Ferrul Connection 20mm dia. 645 I.S.I.Ferrul Connection 25mm dia. 646 I.S.I.Ferrul Connection 32mm dia. 647 I.S.I.Ferrul Connection 40mm dia. 648 I.S.I.Ferrul Connection 50mm dia. 649 Water meter 15 mm diameter 650 Water meter 20 mm diameter 651 Water meter 25 mm diameter 652 Water meter 40 mm diameter 653 Water meter 50 mm diameter 654 Water meter 80 mm diameter 655 Water meter 100 mm diameter 656 Non return Valve 40 mm diameter 657 Non return Valve 50 mm diameter 658 Non return Valve 80 mm diameter 659 Non return Valve 100 mm diameter 660 Colour Wash Hand Basin 0.45 x 0.30 661 White Glaze Earth Sink 0.6 x 0.2 x 0.45 662 Clamp for G.I.pipe 200mm 663 Earopean type glazed W.C.pan 68cm 664 Earopean white glazed earthen ware closet pan 665 P.V.C. Nahni Trap 666 P.V.C. Connector. 15 mm dia 667 Low level flushing cistern 668 Upvc sanitary pipes all 20 mm dia. 669 Upvc sanitary pipes all 75 mm dia. 670 Bib cock stop tap brass heavy 15mm 671 Stainless Steel sink of size 610 x 460 x 200 mm of nirali or equivalent make 672 Upvc sanitary pipes all 63 mm dia. 673 W.C.PAN Colour glazed 57.50 CM (Orissa) 674 Piller cock mixer & Angle cock 675 Upvc sanitary pipes all 25 mm dia. 676 Upvc sanitary pipes all 15 mm dia. 677 Cement 678 Upvc sanitary pipes all 40 mm dia. 679 Upvc sanitary pipes all 50 mm dia. 680 Stainless Steel sink of size 470 x 420 x 178 mm of nirali or equivalent make 681 Bib cock Long Arm 682 Bottletrap wash basin 32 mm Cromium Plated 683 Upvc sanitary pipes all 32 mm dia. 684 Hamp rope 685 Bib cock cock stop tap brass heavy 15 mm 686 Colour wash hand basin 45*30cm 687 Ultra 250 mm. dia. uPVC 90 degree junction chamber base with U trap 688 Ultra 250 mm.dia. uPVCCover & Frame 689 uPVC Blanking Plug 110 mm 690 uPVC 90 degree bend 691 Ultra Shaft 250x470mm 692 Water jet with accessories 693 White glazed full stall urinal 694 Glass plain 6mm thick 695 White Glazed Earthenware Squatting plate (Ladies Urinal) 696 Autoclosing pillar cock of pressmatic tap 697 PVC Aqua kraft type super bib tap 15 mm 698 PVC Aqua kraft type super Two Way bib tap 15 mm 699 Super push button type cock / tap with flange 15 mm 700 PVC Aqua kraft type super jet spray 15 mm 701 PVC Aqua kraft type super right angle stop tap 702 PVC Aqua kraft type super Pillar tap 15 mm 703 Fixing in CC BK Clamp, Battan 704 Wall Mounted European type glazed W.C.pan 705 Super wall sink type tap with flange 15 mm 706 Two Way bib tap with flange 707 super jet spray with flange 2 in 1 faucet 1.50 metre long 708 Chloryphyriphos 709 Solvent 710 D.D.V.P. 711 Malathion 712 Pine Oil 713 S.S. Pipe 40 mm dia 714 Mild Steel 715 Barbed Wire 716 Concentina Coil Wire 717 M.S.Steel 718 RCC Pole 719 Green marble 720 Telephone black granite 721 Karva (for roof and sides 10kg bundle) 722 Tatti 723 Bamboo 25mm dia. 724 Lightening Conductor 725 Salt 726 Copper Tape width 25mm*3mm thick 727 Aluminium Strips 50 mm x 3 mm 728 Cripped wire3 - 0 , 4 - 0 and 5 - 0 wide 729 Welding Electrodes 730 Welded Mesh 75 X 75 mm 731 Welded Mesh 150 X 150 mm 732 Tarat 36 width (Gunny cloth) 733 Chain link3 - 0 , 4 - 0 and 5 - 0 wide 734 Bamboo 50mm dia. 735 Hold Fast for Steel Gate 736 Nut Boldts 12 mm dia. /Nails all size 737 M.S. Pipe 40 mm dia 738 Welding Rod 739 PVC hand rail cover 740 Antitermite Liquid 741 Lock for Drawer/Cupboard 742 Glycel 743 Hing 744 Hot lime 745 Ladder 746 Fine tooth chisel 747 Saw 748 Gloves 749 R.C.C.Pipe 1200mm dia.(Np3)2.5m long 750 R.C.C.Pipe 1100mm dia.(Np3)2.5m long 751 R.C.C.Pipe 1000mm dia.(Np3)2.5m long 752 R.C.C.Pipe 900mm dia.(Np3)2.5m long 753 R.C.C.Pipe 800mm dia.(Np3)2.5m long 754 R.C.C.Pipe 700mm dia.(Np3)2.5m long 755 R.C.C.Pipe 600mm dia.(Np3)2.5m long 756 R.C.C.Pipe 500mm dia.(Np3)2.5m long 757 R.C.C.Pipe 450mm dia.(Np3)2.5m long 758 R.C.C.pipe Np2 class 1000mm dia. 2.5m long 759 R.C.C.Np2 Pipe Collar 1000 mm Dia. 760 R.C.C.pipe Np2 class 1200mm dia. 2.5m long 761 R.C.C.Np2 Pipe Collar 1200 mm Dia. 762 R.C.C.pipe Np2 class 1800mm dia. 2.5m long 763 R.C.C.pipe Np2 class 900mm dia. 2.5m long 764 R.C.C.Np2 Pipe Collar 900 mm Dia. 765 R.C.C.pipe Np2 class 800mm dia. 2.5m long 766 R.C.C.Np2 Pipe Collar 800 mm Dia. 767 R.C.C.pipe Np2 class 700mm dia. 2.5m long 768 R.C.C.pipe Np2 class 600mm dia. 2.5m long 769 R.C.C.Np2 Pipe Collar 600 mm Dia. 770 R.C.C.pipe Np2 class 500mm dia. 2.5m long 771 R.C.C.pipe Np2 class 450mm dia. 2.5m long 772 R.C.C.Np2 Pipe Collar 450 mm Dia. 773 R.C.C.pipe Np2 class 100mm dia. 2m long 774 R.C.C.pipe Np2 class 150mm dia. 2m long 775 R.C.C.pipe Np2 class 225mm dia. 2m long 776 R.C.C.pipe Np2 class 300mm dia. 2m long 777 RCC Pipe Np 4 heavy duty non presure pipe 1000 mm diameter 778 RCC Pipe Np4 heavy duty non presure pipe 1200 mm diameter 779 RCC Pipe Np4 heavy duty non presure pipe 900 mm diameter 780 Cement 781 Structural Steel 782 TMT FE - 500 783 HCRM/CRS Reinforcement 784 Bitumen VG 10 (Bulk) (80/100) 785 Bitumen VG 30 (Bulk) (60/70) 786 Bitumen VG 40 (Bulk) (30/40) 787 Bitumen VG 30 (Packed) (60/70) 788 Bitumen VG 40 (Packed) (30/40) 789 Bitumen VG 10 (Packed) (80/100) 790 Sand - Natural/V.S.I.(Vertical Shaft Impact Crusher)Quality Artifitial Sand 791 Sand - Crushed 792 Natural Sand - Screened (for plaster work only) 793 Bricks II Class 794 Rubble stone excluding royalty 795 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 796 Aggregate 25 mm 797 Aggregate 20 mm 798 Aggregate 12 mm 799 Aggregate 10 mm 800 Aggregate 6 mm 801 Stone Dust 802 Soft Murum 803 Hard Murum 804 Water 805 White Cement 806 Plasticizer 807 Stainless Steel Plate 808 EMULSION RS1 ( Hincol) BULK 809 EMULSION RS1 ( Hincol) Packed 810 WASTE PLASTIC to be used in bituminous treatment as per IRC SP-098-2013 811 Portland Slag Cement (PSC) 812 Ground Granulated Blast Furnance Slag (GGBS) 813 Bitumen VG-40 (bulk (30-40 grade)) 814 Stone Boulder of size 150 mm and below at Cruser Plant 815 Supply of quarried stone 150 - 200 mm size for Hand Broken at site 816 Boulder with minimum size of 300 mm for Pitching at Site 817 Coarse sand at Mixing Plant 818 Coarse sand at Site 819 Murum at Site 820 Fly ash conforming to IS: 3812 ( Part II &I) atHMP Plant / Batching Plant / Crushing Plant 821 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) 822 Close graded Granular sub-base Material 53 mm to 9.5 mm 823 Close graded Granular sub-base Material37.5 mm to 9.5 mm 824 Close graded Granular sub-base Material26.5 mm to 9.5 mm 825 Close graded Granular sub-base Material9.5 mm to 4.75 mm 826 Close graded Granular sub-base Material9.5 mm to 2.36 mm 827 Close graded Granular sub-base Material 4.75mm to 2.36 mm 828 Close graded Granular sub-base Material 4.75mm to 75 micron mm 829 Close graded Granular sub-base Material2.36 mm 830 Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. 831 Coarse graded Granular sub-base Material2.36 mm & below 832 Coarse graded Granular sub-base Material4.75mm to 75 micron mm 833 Coarse graded Granular sub-base Material4.75 mm to 2.36 mm 834 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 835 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 836 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 837 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 838 Coarse graded Granular sub-base Material 53 mm to 26 .5mm 839 Aggregates below 5.6 mm 840 Aggregates 22.4 mm to 2.36 mm 841 Aggregates 22.4 mm to 5.6 mm 842 Aggregates 45 mm to 2.8 mm 843 Aggregates 45 mm to 22.4 mm 844 Aggregates 53 mm to 2.8 mm 845 Aggregates 53 mm to 22.4 mm 846 Aggregates 63 mm to 2.8 mm 847 Aggregates 63 mm to 45 mm 848 Aggregates 90 mm to 45 mm 849 Aggregates 10 mm to 5 mm 850 Aggregates 11.2 mm to 0.09 mm 851 Aggregates 13.2 mm to 0.09 mm 852 Aggregates 13.2 mm to 5.6 mm 853 Aggregates 13.2 mm to 10 mm 854 Aggregates 20 mm to 10 mm 855 Aggregates 25 mm to 10 mm 856 Aggregates 19 mm to 6 mm 857 Aggregates 37.5 mm to 19 mm 858 Aggregates 37.5 mm to 25 mm 859 Aggregates 6 mm nominal size 860 Aggregates 10 mm nominal size 861 Aggregates 13.2/12.5 mm nominal size 862 Aggregates 20 mm nominal size 863 Aggregates 25 mm nominal size 864 Aggregates 40 mm nominal size 865 Binding wire 866 Bitumen ( Cationic Emulsion ) 867 Bitumen VG-30 (bulk (60-70 grade)) 868 Bitumen VG -10 (bulk (80-100 grade )) 869 Bitumen (Cutback ) 870 Bitumen (emulsion) 871 Bitumen (modified graded) (bulk Cr-60) 872 Geo grids 873 Geomembrane 874 Geonets 875 Geotextile 876 Geotextile filter fabric 877 LDO 878 Pavement Marking Paint 879 RCC Pipes 200 mm dia, 2.5 m long for drainage 880 Quarry spall 881 Road Barricade Perforated fench(2000 x 1000 x 40 mm ) 882 Road Barricade Sand Fillable only 1 mtr.[1000(L) x 350(W) x 760(H) mm ] 883 Polypropylene multifilament woven geotextile fabric for filter layer (approved opening size 0.075mm & water permeability 9.00 Litres/Sqm/Second) 884 Polythene bags 885 Trap stones weighing upto 20 kilogram 886 Trap stones weighing from 20 to 50 kilogram 887 Trap stones weighing from 50 to 100 kilogram 888 Trap stones weighing from 100 to 200 kilogram 889 Trap stones weighing from 200 to 300 kilogram 890 Trap stones weighing from 300 to 500 kilogram 891 Trap stones weighing from 500 to 1000 kilogram 892 Trap stones weighing from 1000 kilogram and above 893 Laterite stones rubbles upto 20kilogram 894 Laterite stones rubbles from 20 to 50 kilogram 895 Laterite stones rubbles from 50 to 100 kilogram 896 Gabions boxes of mechanically woven hexagonal shaped wire mesh of type, 10 cm x 12 cm. edges mechanically selvedged (Zinc+ PVC) coated G.I. wires as per BS: 443, mesh wire dia. 3.00 mm, edge wire 3.70 mm size 897 a) Gabion size - 1.00 x 1.00 x 1.00 M 898 b) Gabion size - 1.50 x 1.00 x 1.00 M 899 c) Gabion size - 2.00 x 1.00 x 1.00 M 900 d) Gabion size - 3.00 x 1.00 x 1.00 M 901 e) Gabion size - 4.00 x 1.00 x 1.00 M 902 Flexible gabions of polypropylene material of 10 mm ø four strand mesh size of 150mm x 150 mm size 903 a) Gabion size - 1.00 x 1.00 x 1.00 M 904 b) Gabion size - 1.50 x 1.00 x 1.00 M 905 c) Gabion size - 2.00 x 1.00 x 1.00 M 906 d) Gabion size - 3.00 x 1.00 x 1.00 M 907 Used tyre fender 908 Geotextile bags of sizes 909 a) Geotextile bags size - 1.00 x 0.70 M 910 b) Geotextile bags size - 2.00 x 1.50 M 911 Geotextile tube of 20 metre long & 912 a) Geotextile tube diameter - 3.00 M 913 b) Geotextile tube diameter - 1.50 M
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
28.
Rural Development #10390187 Price Bid
Providing and Supplying various Different material and Machinery Servicesat Grampanchayat Rahatwade Tal Haveli Dist Pune - 2 Centering Oil 3 Plastic Cover Block 4 R.C.C.Jali 50mm thick 5 Plastizer (Rheobuild) 825 RMt. 6 Concrete Spacer Block 15 mm 7 Concrete Spacer Block 20 mm 8 Concrete Spacer Block 25 mm 9 Concrete Spacer Block 30 / 40 mm 10 Anticorrrisive Primer Coat 11 Swaling Coat 12 PVC Coated GI Wire 13 Repairs to cut ends and damages with special liquid epoxy 14 Epoxy paint 15 R.C.C.Jali 80mm thick 16 Bricks (Red) 17 AAC Block 600x200x100 mm 18 Jointing Mortar 19 Fly ash Bricks 20 Corner stone 38*20*30cm 21 Khandakies 22 Pin Header (Standard Size) 23 Hollow Blocks C.C.0.2*0.2*0.4M 24 Hollow Blocks C.C.0.1*0.2*0.4M 25 Hollow Block C C 0.30 x 0.20 x 0.15 26 Siporex Block 75x240x650 mm 27 GBP Build Fast plus 28 Siporex Block 100x240x650 mm 29 Siporex Block 200x240x650 mm 30 Bitumen (Compound) 31 Brick bats 32 Water proof compound I.S 33 Tar Felt B.H.I.S.I.3mm thick 34 Acrylic Polymer Modified waterproofing Powder 35 Acrylic Polymer Modified Liquid 36 Fibre Glass Mesh 37 Bitumen 85/25 Grade 38 Bitumen 85/25 Grade Cold Primer 39 Grit (Add Below 5.6) 40 Bitumen Felt 41 Polydee-TP40 Primer 42 Polydee-TP40 Primer 43 Polydee-LM 44 Polydee-LM 150mm width 45 Bituflex Cloesdcell foam 30x30 mm 46 AG 10 Granules 47 Polydee-MC 48 Polydee-41 sealant and polyseal 49 Polydee-11 50 Bitumen Pad 25mm thick 1.20 x 1.20 Mtr 51 Neeru / Sanala 52 White Putty (Cement) 53 Texture Material 54 Rough Shahabad 25 to 30mm thick 55 Rough Shahabad 40 to 45 mm thick 56 Polished Shahabad 25 to 30mm thick 57 Rough Shahabad 50 to 60mm thick 58 Polished Shahabad 40 to 50mm thick For step 59 Polished Shahabad Machine cut 25mm thick 60 Polished Shahabad for step25mm thick 61 Tandoor Polished 25mm thick (Machine cut) 62 Tandoor Polished 25mm thick (Hand Cut) 63 Tandoor Polished for steps25mm thisk 64 Black Kadappa (one side polish) (Machine cut) 25 mm thick 65 Black Kadappa (one side polish) (Machine cut) 35mm thick 66 Both Sides Polished Kadappastone 25mm thick 67 Kota stone (Machine cut) upto 25-30mm thick one side polished 68 Kota stone (Hand cut) upto 25-30mm thick one side polished 69 Kota stone for step polished) upto 25mm thick (1.2*0.3M) 70 Ceramic tiles 30*30cm 71 Ceramic Antiskid Flooring Tiles 30 x 30 cm 72 Ceramic Tiles for dado 30 cm x 30 cm 73 Ceramic Tiles for dado 30 x 45 cm 74 Heavy duty interlocking concrete block 60mm thick gray 300 kg/sq.cm. 75 Heavy duty interlocking concrete block 60mm thick coloured 300kg/sq.cm 76 Heavy duty interlocking concrete block 80mm thick gray 300kg/sq.cm 77 Heavy duty interlocking concrete block 80mm thick coloured 300kg/sq.cm 78 Heavy duty interlocking concrete block 80mm thick rubber mould glossy 400kg/sq.cm 79 Heavy duty interlocking concrete block 40mm thick colour 200 kg/sq.cm 80 Telephone Black Granite 81 Green marble 82 Vitrified tiles Glossy Size 590 to 605 mm* 590 to 605 mm*8 to 10mm 83 Vitrifiedmatt finish - size 590 to 605 mm* 590 to 605 mm *8 to 10mm 84 Vitrified rustic matt stone finish size 590 to 605mm *590 to 605mm*8 to 10mm 85 Vertified stone effect finish size 590 to 605mm* 590 to 605mm * 8 to 10mm 86 Calcet Powder 87 Black Oxide powder 88 Fevi Matt Chemical 10 Kg Bag 89 Marble chips 90 Heavy duty interlocking concrete block 60mm thick rubber mould glossy 400kg/sq.cm 91 Tremix Treatment 100 mm thick 92 Marble mosaic chequered tiles (gray) 93 Colour cement 94 Heavy Duty Designer come. tile for flooring 95 Heavy Duty Designer come. tile for Steps 96 PVC flooring 97 Ceramic Tiles for dado 30 x 60 cm 98 Marble (other than white makrana) 99 Kota stone (Hand cut) upto 45-55mm thick one side polished 100 Vitrifiedmatt finish - size 895 to 900 mm* 895 to 900 mm *10 to 12 mm 101 Bees wax 102 Coal Tar 103 Common Spirit 104 French Polish 105 Varnish 106 Malemaine Polish 107 C.C.T.W. Ballies 125 mm Diameter 108 Oil enamel paint/flat/glossy paint(ready mix) (with I.S.I. Mark) 109 Synthetic paint (ready mix) 110 Catonic emulsion paint 111 White oil paint 100ml pack tin 112 Red Oxide paint 113 Cement paint 114 Steel Primer 115 Primer for plaster surface 116 Putty 117 Boiled linseed oil 118 Linseed oil double boiled 119 Terpentine 120 Wood Primer 121 Brush for lettring 122 Brush for road marking 5cm 123 Brush for marking road 8cm 124 Brush for road marking 10cm 125 Lustre paint 126 Textured Synthetic paint 127 White lead paint 128 Birla wall care putty 129 Aluminium Paint 130 Plastic emulsion paint 131 Acraylic Emulsion Paint 132 Exterior Primer 133 Weather shield paint 134 Neel 135 Oil bound distemper 136 Red powder / Geru 137 Saras 138 Scrapping sand paper size (30 * 20cm) 139 Dry distemper 140 Chunam / White lime Powder 141 paint Luster Paint 142 Roller Brush 143 Royale Luxury Emulsion Paint 144 Country Teak Wood 145 Ghana teak wood 146 Teak Wood planks above 2.5 m length 147 Teak wood bidding 1/2 * 1/2 148 T.W.Balli 100 mm dia 149 Jungle wood (non teak) normal 150 Bamboo 25mm dia.(4.5 to 6m) 151 Bamboo 50mm dia. 152 Bamboo Matting 1.2*1.8m 153 Ply wood 12mm thick 154 Ply wood 6mm thick 155 Mica laminate as per ISI 0.1 mm thick 156 Face Veneel board 4 mm thick 157 Particle board B.W.P.Phinol bond 12mm thick 158 Particle board B.W.P.Phinol bond 19 mm thick 159 Formica 1.5 mm thick 160 Tower bolt brass oxidised 10 mm dia length 150 mm 161 Ferical 162 Ply wood 18mm thick Commercial 163 Teak wood battens 50 * 25mm 164 Teak wood batten 25 mm * 12 mm 165 Veneer 3.5 to 4 mm thick 166 Alluminium rod 25mm dia 167 A.C.Corrugated sheet 6mm thick 168 A.C.Sheet ridge 169 A.C.Sheet plain 4mm thick 170 G.C.I. Sheet (Corrugated) 22 BWG 171 G.C.I. Sheet (Corrugated) 24 BWG 172 G.I. Sheet (plain) 22 BWG 173 G.I. Sheet (plain) 24 BWG 174 G.I.Washers 175 G.I. J or L hooks 6 mm dia. 176 Nails iron all size 177 Mangalore tiles class AA 178 Mangalore Ridge / Hip tiles 179 Mangalore Glass tiles 180 Mangalore Pattern cowl Ventilator 181 G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured Sheet 182 G.I. Pre coated Ridge Sheet 183 Gypsum powder 184 Aluminium Alloy plate 2mm thick 185 Aluminium sheeting fixed with encapsuled lens type reflective sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable. 186 Plaster Of Paris 187 Decorative Board of Fibrous Plaster of Paris 12 to 15 mm 188 Acoustic Board 12 mm thick 189 Gypsum Board 12.5 mm thick 190 UPVC 3 layer trapezoidal 2.00 mm sheet 191 Light weight calcium silicate tile of size 595 x 595 mm of texture spin stone / cosmos / plain / Glode fine fissured. 192 Bioguard Board 16 mm 193 Ultima tile 194 Optra tile 195 Proflex Sheet 1 mm 196 Sky light 2 mm thick 197 Hanger rod 4mm thick 198 level Adjustment clip size 85x30x0.8mm 199 Dash fastener 12.5mm dia 50mm long 200 Soffit cleat 25mmx35mmx1.60mm 201 Wooden Screws with plastic rawl plugs 35mmx8mm 202 Light weight calcium silicate tiles of size 595x595mm of texture Spintone for Tegular edge ceiling 203 Plain Zinc Sheet 204 UPVC ridge/hip tiles 205 Hanger wire (2.68 mm dia), 1.82 m long 206 Dune edge tiles 207 Fine fissured edge tiles 208 Turbo ventilator 24 209 Tarat 36 width ( Gunny Cloth) 210 Wire glass 211 Fire wood 212 Precoated Galvanised Steel Plain Sheet 213 Connecting clip for supports 214 Dry wall screws 25 mm 215 Jointing Compound 216 Jointing Tape 217 Minaral Fibre board 600 x 600 mm 218 Perimeter Channel 80 x 8 mm 219 Screws 1 12 220 Screws 1/2 221 Rawal Plug 222 Plain Zinc Sheet 0.50 mm thick 223 Aldrop 300*16mm Chromium Plated 224 Aldrop Iron Oxidise 300*16mm 225 Aldrop Stainless steel 300*16mm 226 Handle 125mm M.S. Chromium Plated 227 Handle 150mm Brass Chromium plated (Rounded Shape) 228 Handle Alluminium 125 mm 229 Iron hinges chromium plated 125mm 230 But Hinges Alluminium 125mm 231 G.I.Screw 50mm 232 G.I.Screw 25mm 233 Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty) 234 Tower bolt Aluminium 10mm dia.length 250mm 235 Tower bolt Aluminium 10mm dia.length 200mm 236 Tower bolt M.S. Chromium plated 10mm dia,length 300mm 237 Tower bolt M.S. Chromium plated 10mm dia,length 200mm 238 Cold Rolled Steel Hollow Section Door frame 1829*610mm 239 Aluminium stay 25cm 240 Aluminium stay 30cm 241 Jali fly proof 242 Jali chicken mesh 243 Jali welded mesh 25*25* 13 Guage 244 Jali welded mesh 25*25* 11 Guage 245 Jali welded mesh 50*25 13 Guage 246 Jali welded mesh 50*25 11 Guage 247 Hold fast Iron 300*40*5mm 248 Sliding Door Bolt Stainless Steel 12mm dia. 250mm length 249 Glass plain 3mm 250 Glass plain 5mm 251 Glass obscured (bajara) 5mm 252 G.I. Nut Bolt 253 Housing box to rolling shutter 254 Mechanical Gear For Rolling Shutter 255 Mortice lock superior 256 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side 257 Iron washer 12mm to 16mm 258 Aluminium Section 259 Nylon / PVC Gasket 260 Alluminium Screw 32 x 6 mm, 25 x 6 mm 261 Concealed locking arrangement of 100 mm length for sliding window 262 Alluminium Grill 7.50 mm thick 263 Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark 264 Iron Oxidized sliding door bolt 200 mm length, 12 mm dia 265 Powder and Chemicals for colour anodizing process of alluminium sections 266 Lock for Sliding Shutter 267 All Bearing Roller 268 All Frame Rail Angle 269 Welding Electrodes 270 C.R.C. Sheet 271 Abstrone Butadyne Styrine (ABS) Door Shutter including Transportation 272 Puff Insulation 35-40 Kg/Cumt. Density 273 PVC Door Shutter 34 mm thick Factory Made Shutter 274 FRP Door Shutter 30 mm thick Factory Made Shutter 275 FRP Door Shutter 35 mm thick Factory Made Shutter 276 Bison Pannel 277 PVC factory made solid panel door shutter with stainless steel fixutres & fastening 278 PVC factory made flush door 30 mm with stainless steel fixutres & fastening 279 Sliding door bolt Chromium plated 250mm 280 Acrylic Plain Sheet 3 mm 281 Aldrop Stainless steel 300*16mm 282 Aldrop Stainless steel 250*16 mm 283 Handle 150mm Stainless Steel (Rounded Shape) 284 Handle 200mm Stainless Steel (Rounded Shape) 285 Stainless Steel Hinges - 100mm 14 gauge (Heavy Duty) 286 Stainless Steel Hinges - 125mm 14 gauge(Heavy Duty) 287 Housing box to rolling shutter 288 Mechanical Gear For Rolling Shutter 289 Door StopperStainless Steel 290 Tower Bolt Stainless Steel 200 mm 291 Tower Bolt Stainless Steel 250 mm 292 Sliding Door Bolt Stainless Steel 250 mm 293 Handle Stainless Steel 100 mm 294 Eye Hole Lens 295 Rolling Shutter 296 Ply Wood 297 Stainless steel hooks and eyes 200 mm 298 Steel Window 299 Powder Coating 300 Rubber Lining 301 Ply wood 9 mm thick 302 Laminated board double 12mm thick 303 Alluminium Section anodized 304 Handle iron oxidised 150 mm 305 Hinges iron oxidised 100 mm 306 T. W. Particle board, both face laminated 12 mm 307 Battens T.W. 70 x 45 mm 308 Nuts and Bolts 309 Plain FRP Sheet 22 B.W.G. 310 TW Runner (6 x 3) 311 Alluminium Screw 312 F Patti 313 Teak wood planks above 2.5m length 314 Vision Panel 315 Solid core shutter 35 mm thick with commercial veneer facing and phenol bonded 316 Oil Paint 317 Acrylic Plain Sheet 2 mm thick 318 Aluminium Sheet 24 B.W.G 319 Alluminium Section with Powder Coating 320 Concealed lock 321 Mosquito proof Nylone net 322 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side with bidding patty 323 G.I. Pipe 100mm dia. Medium type 324 G.I. Pipe 100mm dia. Heavy type 325 G.I. Pipe 15mm dia. Medium type 326 G.I. Pipe 15mm dia. Heavy type 327 G.I. Pipe 20mm dia. Medium type 328 G.I. Pipe 20mm dia.Heavy type 329 G.I. Pipe 25mm dia. Medium type 330 G.I. Pipe 25mm dia. Heavy type 331 G.I. Pipe 32mm dia. Medium type 332 G.I. Pipe 32mm dia.Heavy type 333 G.I. Pipe 40mm dia. Medium type 334 G.I. Pipe 40mm dia. Heavy type 335 G.I. Pipe 50mm dia. Medium type 336 G.I. Pipe 50mm dia. Heavy type 337 G.I. Pipe 65mm dia. Medium type 338 G.I. Pipe 65mm dia. Heavy type 339 G.I. Pipe 80mm dia. Medium type 340 G.I. Pipe 80mm dia. Heavy type 341 PVC Nahani Trap 75 mm 342 G.I.Clamps 100mm to 150mm 343 PVC Nahani Trap 150 mm 344 G.I.Clamps 12mm to 32mm 345 G.I.Clamps 40mm to 80mm 346 Anglo Indian W.C. Pan Colour 347 G.I.Fixtures 348 P.V.C. Cowl 100 mm 349 G.I.Screws 30mm 350 G.I.Screws 40mm 351 G.I.Union 25mm dia. 352 Gully trap cover with frame 353 Gun Metal stop tap with crutch wheel 20mm 354 Gun metal stop tap with crutch wheel 25mm 355 Gun metal stop tap with crutch wheel 15mm 356 Gun metal stop tap with crutch wheel 20mm 357 C.I.Bend 75mm dia. 358 C.I.Bend 100mm dia. 359 C.I.Bip tap 12mm 360 C.I.Grating 150mm dia. 361 C.I.Grating 100mm dia. 362 C.I.Grating 75mm dia. 363 C.I.Brackets 364 C.I.Collers 100mm dia. 365 C.I.Copllers 75mm dia. 366 C.I.Cover 45*30 cm with frame 367 C.I.Cowl / Vent 100mm dia. 368 C.I.Cowl / Vent 150mm dia. 369 C.I.Cowl / Vent 75mm dia. 370 C.I.Hinged Cover with frame 371 C.I.Man hole cover 50 kg. 372 C.I.Man hole cover 75 kg. 373 C.I.Man hole cover 100 kg. 374 C.I.Man hole cover 175 kg.Heavy (0.9*0.45m) 375 C.I.Nahani trap 100mm dia.(375mm long) 376 C.I.Nahani trap 75 to 80mm dia.(375mm long) 377 C.I.100*75*300 long arm (wt. 6kg)nahani trap 378 C.I.Soil pipe 100mm dia. 379 C.I.Soil pipe 150mm dia. 380 C.I,Soil pipe 75 to 80mm dia. 381 C.I.Shoe 75 mm dia. 382 C.I. Shoe 100 mm dia. 383 C.I.Shoe 150mm 384 Ball cock 15mm dia.P.V.C.FLOAT 385 Ball cock 25mm dia.P.V.C.FLOAT 386 Ball cock 40mm dia.P.V.C.FLOAT 387 Ball cock 50mm dia.P.V.C.FLOAT 388 Bib cock stop tap brass heavy 15mm 389 Bib cock stop tap brass heavy 20mm 390 Bib cockstop tap brass heavy 25mm 391 Bib tap 12mm brass medium 392 Colour wash hand basin 55*40cm 393 Colour wash hand basin 63*45cm 394 White glazed wash basin 45*30cm 395 White glazed wash hand basin 55*50cm 396 P.V.C. flexible Waste Pipe 32 mm dia 397 White Glazed Wash Hand Basin 63 x 45 cm 398 Sink white glazed 45*20*30cm 399 Pedestal for wash basin (standard size) 400 C.C.Septic tank 0.9m dia.(2.5m long) 401 C.C.Septic tank 1.20m dia.(2.5m long) 402 C.I.Steps for manhole 403 C.I.Cover with frame (Gully trap) 404 C.I.Plug Bend 150MM dia. 405 Clamp for G.I.pipe 25mm 406 Colour European type W.C.Pan 407 European type glazed W.C.pan 408 W.C.PAN Coloured glazed 64CM.(Orissa) 409 W.C.PAN White glazed 58 CM.Indian 410 W.C.PAN White glazed 57.50 CM (Orissa) 411 Fibre flushing tank for W.C. 412 Flushing tank automatic Urinal 10ltr. C.I. 413 Flushing tank automatic Urinal 5ltr. (P.V.C.) 414 Low level flush pr. St. 10ltr. 415 Flat back Urinal 416 Stall Type Urinal 417 Lipped type Urinal 418 Coloured glazed full stall Urinal 419 Bleaching Powder 420 Potassium Permanganate 421 Nylon Brush 422 Duster 423 Plastic Bucket 424 Coir 425 Gunny Cloth 426 Kharata 427 Wheel stop tap brass 15mm 428 Wheel stop tap brass 20mm 429 Wheel stop tap brass 25mm 430 Socket brass for 32mm tap 431 Socket brass for 40mm tap 432 Socket brass for 50mm tap 433 Socket brass for 65mm tap 434 Socket for 100mm tap 435 Socket for 15mm tap 436 Socket for 20mm tap 437 Socket for 25mm tap 438 Socket for 32mm tap 439 Socket for 40mm tap 440 Socket for 50mm tap 441 Socket for 65mm tap 442 Socket for 80mm tap 443 Span Yarn 444 Strainer for 100mm 445 Strainer for 40mm 446 Strainer for 50mm 447 Strainer for 80mm 448 Strainer for 15mm 449 Strainer for 20mm 450 Strainer for 25mm 451 Stone ware pipe 100mm dia. 452 Stone ware pipe 150mm dia. 453 Stone ware pipe 225mm dia. 454 Stone ware glazed pipe half round 100mm dia. 455 Stop tap brass with crunch wheel 15mm dia. 456 Towel rod with clamps 16mm dia. 457 Mirror 40*50cm. With plastic frame 458 Brass T Thimble Socket 32mm dia. 459 Brass wheel stop tap 32mm dia. 460 Brass wheel stop tap 40mm dia. 461 Brass wheel stop tap 50mm dia. 462 Brass wheel stop tap 65mm dia. 463 Brass wheel stop tap 80mm dia. 464 Half turn flush cock 25mm dia. 465 12mm flexible inlet pipe connection 466 Bell mouth cover 100mm dia. 467 Box chamber with lock 0.6*0.45m 468 Brass nozzle pillar tap 12mm 469 Black bakelite seat to european closer 470 Concussion push button type gun metal tap 15 to 25mm dia. 471 Coupling cast Iron 100mm dia. 472 Coupling cast Iron 80mm dia. 473 Chromium plated 12mm dia.bib cock 474 C.I.Trap grating 15*10 cm 475 C.I.Y junction 100mm dia. 476 C.I.Y junction 150mm dia. 477 C.I.Y junction 75mm dia. 478 Enameled bend 40mm dia. 479 Ferrul for C.I.pipr 100mm 480 White glazed foot rest chequred 25*10 cm 481 Half round earthware pipe 100mm(60cm long) 482 Half round earthware pipe 150mm(60cm long) 483 Jute Rope 484 Half round chaina ware pipe 100mm(60cm long) 485 Lead pipe 32mm dia. 486 Mohagani seat with lid 487 Mosquito proof coupling 488 Non-return valve 15mm for water meter 489 Non-return valve 25mm for water meter 490 Non-return valve 20mm for water meter 491 Piller tap 12mm dia.chromium plated heavy 492 P.Trap and lead pipe upto 40mm dia. 493 Rubber gasket (25, 28 and 20 cm) 494 Rubber Incertion 495 Rubberised adhesive 496 Salt glazed stone ware gully trap (150*150mm) 497 Self project tap brass chromium plated 15mm 498 Sewer trap 499 Shower rose chromium plated brass 10cm 500 P.V.C. pipe 15mm dia.10kg/cm2 pressure(class IV) 501 P.V.C. pipe 20mm dia.10kg/cm2 pressure(class IV) 502 P.V.C. pipe 25mm dia.10kg/cm2 pressure(class IV) 503 P.V.C. pipe 32mm dia.10kg/cm2 pressure(class IV) 504 P.V.C. pipe 40mm dia.10kg/cm2 pressure(class IV) 505 P.V.C. pipe 50mm dia.10kg/cm2 pressure(class IV) 506 P.V.C. pipe 60mm dia.10kg/cm2 pressure(class IV) 507 P.V.C. pipe 75mm dia.4 kg/cm2 pressure(class II) 508 P.V.C. 75 mm Soil Pipe 6 Kg/cm2 Pressure 509 P.V.C. pipe 90mm dia.4 kg/cm2 pressure(class II) 510 P.V.C.pipe 110mm dia.4kg/cm2 pressure (class II) 511 P.V.C. 110 mm Rain Water Pipe 6Kg/cm2 Pressure 512 P.V.C. 110 mm Soil Pipe 6 Kg/cm2 Pressure 513 P.V.C.pipe 140mm dia.4kg/cm2 pressure (class II) 514 P.V.C.pipe 160mm dia.4kg/cm2 pressure (class II) 515 P.V.C.pipe 160mm dia.Soil Pipe 516 P.V.C.pipe 160mm dia. Rain Water Pipe 517 P.V.C.Socket 15mm dia. 518 P.V.C.Socket 20mm dia. 519 P.V.C.Socket 25mm dia. 520 P.V.C.Socket 32mm dia. 521 P.V.C.Socket 40mm dia. 522 P.V.C.Socket 50mm dia. 523 P.V.C.Socket 60mm dia. 524 P.V.C.Flushing tank (12 ltr. Capacity) 525 Flush valve 32mm dia. 526 Ferocret tank 527 Stainless Steel sink of size 600*510*200mmof nirali or equivalent make 528 C.P.pillar cock jaquar make continental (Cat.No. CON-011) 529 C.P.pillar cock (ISI)jaquar make continental 530 C.P.pillar cock long neck with aerator jaquar make continental (Cat.No. CON- 021) 531 C.P.Bib cock (ISI)jaquar make continental (Cat.No. CON-037) 532 C.P.Bib Cock long thread jaquar make continental (Cat.No. CON-039) 533 C.P.2-way bib cock jaquar make continental (Cat.No. CON-041) 534 C.P.bib cock with wall flange long thread jaquar make continental (Cat.No. CON- 047) 535 C.P.Bib cock with nozzle jaquar make continental (Cat.No. CON-049) 536 C.P.Angular stop cockjaquar make continental (Cat.No. CON-053) 537 C.P.Angular stop cock long thread jaquar make continental(Cat.No. CON-055) 538 C.P.angular stop cock with wall flange jaquar make continental(Cat.No. CON- 059) 539 C.P.central hole basin mixer without popup waste system with 450mm long braided hoses jaquar make continental (Cat.No. CON-167B) 540 C.P.wall mixer with telephone shower arragnementonly but without teltphone shower crutch jaquar make continental (Cat.No. CON-217) 541 C.p.wall mixer non-telephonic shower arrangement jaquar make continental (Cat.No. CON-219) 542 C.P.wall mixer(wall mounted model) with telephone shower arrangement only and with telephone shower crutch jaquar make continental (Cat.No. CON-267) 543 C.P.wall mixer with provision for overheadshower with 115mm long bend pipe and wall flange jaquar make continental (Cat.No. CON-273UPR) 544 C.P.sink mixer with swinging casted spout (wallmounted) jaquar make continental (Cat.No. CON-309) 545 C.P.sink mixer swinging spout (table mounted model) 450mm long braided hoses jaquar make continental (Cat.No. CON-309B) 546 C.P.sink cock with swinging casted spout jaquar make continental (Cat.No. CON- 347) 547 C.P.sink cock with raised J shaped swinging casted spout (table mounted) jaquar make continental (Cat.No. CON- 359) 548 C.p.shower arm 190mm long light body with wallflange jaquar make continental (Cat. No. SHA - 477) 549 C.P.Flush cock with wall flange 25mm with plain knob jaquar make continental (Cat.No. FLR 6081) 550 C.P.Towel rail 24 jaquar make continental (Cat. No. ACN 1111N ) 551 C.P.Towel ring square jaquar make continental (Cat. No. ACN 1121N ) 552 C.P.Soap dish hooker jaquar make continental (Cat. No. AKB 35731 ) 553 C.P.soap dish (polyurethane)jaquar make continental (Cat. No. AQN 7733 ) 554 C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751) 555 C.P.Toilet rack 24with lower hanger jaquar make continental (Cat. No. ACN 1181N) 556 C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563) 557 C.P.Pillar cock jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7011 ) 558 C.P.Bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT7037 ) 559 C.P.2-way bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7041) 560 C.P.Angular stop cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7053) 561 C.P.central hole basin mixer with regular spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7167bB ) 562 C.P.central hole basin mixer with regular spout with popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7169b ) 563 C.P.central hole basin mixer with small spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7171B) 564 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only but without crutchjaquar make queens collection(quarter turn filling) (Cat. No. QQT 7217 ) 565 C.P.wall mixer non-telephonic shower system jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7219 ) 566 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only and with telephone shower crutch jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7267) 567 Hydraulic door closer 568 cPVC pipe 15mm dia. 569 cPVC pipe 20mm dia. 570 cPVC pipe 25mm dia. 571 cPVC pipe 32mm dia. 572 cPVC pipe 40mm dia. 573 cPVC pipe 50mm dia. 574 cPVC Coupling for 15mm dia. 575 cPVC Coupling for 20mm dia. 576 cPVC Coupling for 25mm dia. 577 cPVC Coupling for 32mm dia. 578 cPVC Coupling for 40mm dia. 579 cPVC Coupling for 50mm dia. 580 Elbow 90 Degree for 15mm dia. 581 Elbow 90 Degree for 20mm dia. 582 Elbow 90 Degree for 25mm dia. 583 Elbow 90 Degree for 32mm dia. 584 Elbow 90 Degree for 40mm dia. 585 Elbow 90 Degree for 50mm dia. 586 Tee for 15mm dia. 587 Tee for 20mm dia. 588 Tee for 25mm dia. 589 Tee for 32mm dia. 590 Tee for 40mm dia. 591 Tee for 50mm dia. 592 End cap for 15mm dia. 593 End cap for 20mm dia. 594 End cap for 25mm dia. 595 End cap for 32mm dia. 596 End cap for 40mm dia. 597 End cap for 50mm dia. 598 Ball cock for 15mm dia. 599 Ball cock for 12mm dia. 600 Ball cock for 25mm dia. 601 Ball cock for 32mm dia. 602 Ball cock for 40mm dia. 603 Araldite adhesive 604 Ball valves for 50mm dia. 605 Male adapter (Brass Threads) for 15mm dia. 606 Male adapter (Brass Threads) for 20mm dia. 607 Male adapter (Brass Threads) for 25mm dia. 608 Male adapter (Brass Threads) for 32mm dia. 609 Male adapter (Brass Threads) for 40mm dia. 610 Male adapter (Brass Threads) for 50mm dia. 611 Male adapter (Plastic Threads) for 15mm dia. 612 Male adapter (Plastic Threads) for 20mm dia. 613 Male adapter (Plastic Threads) for 25mm dia. 614 Male adapter (Plastic Threads) for 32mm dia. 615 Male adapter (Plastic Threads) for 40mm dia. 616 Male adapter (Plastic Threads) for 50mm dia. 617 Female adapter (Brass Threads) for 15mm dia. 618 Female adapter (Brass Threads) for 20mm dia. 619 Female adapter (Brass Threads) for 25mm dia. 620 Female adapter (Brass Threads) for 32mm dia. 621 Female adapter (Brass Threads) for 40mm dia. 622 Female adapter (Brass Threads) for 50mm dia. 623 Female adapter (Plastic Threads) for 15mm dia. 624 Female adapter (Plastic Threads) for 20mm dia. 625 Female adapter (Plastic Threads) for 25mm dia. 626 Union for 15mm dia. 627 Union for 20mm dia. 628 Union for 25mm dia. 629 Union for 32mm dia. 630 Union for 40mm dia. 631 Union for 50mm dia. 632 Cross for 15mm dia. 633 Cross for 20mm dia. 634 Step over Bend 15mm dia. 635 Step over Bend 20mm dia. 636 Tee holder for 15mm dia. 637 Tee holder for 32mm dia. 638 End plug threaded for 15mm dia. 639 R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg 640 R.C.C.Chamber cover with frame 90cm*45cm Medium Duty 140kg 641 R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg 642 R.C.C.Chamber cover with frame 60cm*45cm Medium Duty 100kg 643 I.S.I.Ferrul Connection15mm dia. 644 I.S.I.Ferrul Connection 20mm dia. 645 I.S.I.Ferrul Connection 25mm dia. 646 I.S.I.Ferrul Connection 32mm dia. 647 I.S.I.Ferrul Connection 40mm dia. 648 I.S.I.Ferrul Connection 50mm dia. 649 Water meter 15 mm diameter 650 Water meter 20 mm diameter 651 Water meter 25 mm diameter 652 Water meter 40 mm diameter 653 Water meter 50 mm diameter 654 Water meter 80 mm diameter 655 Water meter 100 mm diameter 656 Non return Valve 40 mm diameter 657 Non return Valve 50 mm diameter 658 Non return Valve 80 mm diameter 659 Non return Valve 100 mm diameter 660 Colour Wash Hand Basin 0.45 x 0.30 661 White Glaze Earth Sink 0.6 x 0.2 x 0.45 662 Clamp for G.I.pipe 200mm 663 Earopean type glazed W.C.pan 68cm 664 Earopean white glazed earthen ware closet pan 665 P.V.C. Nahni Trap 666 P.V.C. Connector. 15 mm dia 667 Low level flushing cistern 668 Upvc sanitary pipes all 20 mm dia. 669 Upvc sanitary pipes all 75 mm dia. 670 Bib cock stop tap brass heavy 15mm 671 Stainless Steel sink of size 610 x 460 x 200 mm of nirali or equivalent make 672 Upvc sanitary pipes all 63 mm dia. 673 W.C.PAN Colour glazed 57.50 CM (Orissa) 674 Piller cock mixer & Angle cock 675 Upvc sanitary pipes all 25 mm dia. 676 Upvc sanitary pipes all 15 mm dia. 677 Cement 678 Upvc sanitary pipes all 40 mm dia. 679 Upvc sanitary pipes all 50 mm dia. 680 Stainless Steel sink of size 470 x 420 x 178 mm of nirali or equivalent make 681 Bib cock Long Arm 682 Bottletrap wash basin 32 mm Cromium Plated 683 Upvc sanitary pipes all 32 mm dia. 684 Hamp rope 685 Bib cock cock stop tap brass heavy 15 mm 686 Colour wash hand basin 45*30cm 687 Ultra 250 mm. dia. uPVC 90 degree junction chamber base with U trap 688 Ultra 250 mm.dia. uPVCCover & Frame 689 uPVC Blanking Plug 110 mm 690 uPVC 90 degree bend 691 Ultra Shaft 250x470mm 692 Water jet with accessories 693 White glazed full stall urinal 694 Glass plain 6mm thick 695 White Glazed Earthenware Squatting plate (Ladies Urinal) 696 Autoclosing pillar cock of pressmatic tap 697 PVC Aqua kraft type super bib tap 15 mm 698 PVC Aqua kraft type super Two Way bib tap 15 mm 699 Super push button type cock / tap with flange 15 mm 700 PVC Aqua kraft type super jet spray 15 mm 701 PVC Aqua kraft type super right angle stop tap 702 PVC Aqua kraft type super Pillar tap 15 mm 703 Fixing in CC BK Clamp, Battan 704 Wall Mounted European type glazed W.C.pan 705 Super wall sink type tap with flange 15 mm 706 Two Way bib tap with flange 707 super jet spray with flange 2 in 1 faucet 1.50 metre long 708 Chloryphyriphos 709 Solvent 710 D.D.V.P. 711 Malathion 712 Pine Oil 713 S.S. Pipe 40 mm dia 714 Mild Steel 715 Barbed Wire 716 Concentina Coil Wire 717 M.S.Steel 718 RCC Pole 719 Green marble 720 Telephone black granite 721 Karva (for roof and sides 10kg bundle) 722 Tatti 723 Bamboo 25mm dia. 724 Lightening Conductor 725 Salt 726 Copper Tape width 25mm*3mm thick 727 Aluminium Strips 50 mm x 3 mm 728 Cripped wire3 - 0 , 4 - 0 and 5 - 0 wide 729 Welding Electrodes 730 Welded Mesh 75 X 75 mm 731 Welded Mesh 150 X 150 mm 732 Tarat 36 width (Gunny cloth) 733 Chain link3 - 0 , 4 - 0 and 5 - 0 wide 734 Bamboo 50mm dia. 735 Hold Fast for Steel Gate 736 Nut Boldts 12 mm dia. /Nails all size 737 M.S. Pipe 40 mm dia 738 Welding Rod 739 PVC hand rail cover 740 Antitermite Liquid 741 Lock for Drawer/Cupboard 742 Glycel 743 Hing 744 Hot lime 745 Ladder 746 Fine tooth chisel 747 Saw 748 Gloves 749 R.C.C.Pipe 1200mm dia.(Np3)2.5m long 750 R.C.C.Pipe 1100mm dia.(Np3)2.5m long 751 R.C.C.Pipe 1000mm dia.(Np3)2.5m long 752 R.C.C.Pipe 900mm dia.(Np3)2.5m long 753 R.C.C.Pipe 800mm dia.(Np3)2.5m long 754 R.C.C.Pipe 700mm dia.(Np3)2.5m long 755 R.C.C.Pipe 600mm dia.(Np3)2.5m long 756 R.C.C.Pipe 500mm dia.(Np3)2.5m long 757 R.C.C.Pipe 450mm dia.(Np3)2.5m long 758 R.C.C.pipe Np2 class 1000mm dia. 2.5m long 759 R.C.C.Np2 Pipe Collar 1000 mm Dia. 760 R.C.C.pipe Np2 class 1200mm dia. 2.5m long 761 R.C.C.Np2 Pipe Collar 1200 mm Dia. 762 R.C.C.pipe Np2 class 1800mm dia. 2.5m long 763 R.C.C.pipe Np2 class 900mm dia. 2.5m long 764 R.C.C.Np2 Pipe Collar 900 mm Dia. 765 R.C.C.pipe Np2 class 800mm dia. 2.5m long 766 R.C.C.Np2 Pipe Collar 800 mm Dia. 767 R.C.C.pipe Np2 class 700mm dia. 2.5m long 768 R.C.C.pipe Np2 class 600mm dia. 2.5m long 769 R.C.C.Np2 Pipe Collar 600 mm Dia. 770 R.C.C.pipe Np2 class 500mm dia. 2.5m long 771 R.C.C.pipe Np2 class 450mm dia. 2.5m long 772 R.C.C.Np2 Pipe Collar 450 mm Dia. 773 R.C.C.pipe Np2 class 100mm dia. 2m long 774 R.C.C.pipe Np2 class 150mm dia. 2m long 775 R.C.C.pipe Np2 class 225mm dia. 2m long 776 R.C.C.pipe Np2 class 300mm dia. 2m long 777 RCC Pipe Np 4 heavy duty non presure pipe 1000 mm diameter 778 RCC Pipe Np4 heavy duty non presure pipe 1200 mm diameter 779 RCC Pipe Np4 heavy duty non presure pipe 900 mm diameter 780 Cement 781 Structural Steel 782 TMT FE - 500 783 HCRM/CRS Reinforcement 784 Bitumen VG 10 (Bulk) (80/100) 785 Bitumen VG 30 (Bulk) (60/70) 786 Bitumen VG 40 (Bulk) (30/40) 787 Bitumen VG 30 (Packed) (60/70) 788 Bitumen VG 40 (Packed) (30/40) 789 Bitumen VG 10 (Packed) (80/100) 790 Sand - Natural/V.S.I.(Vertical Shaft Impact Crusher)Quality Artifitial Sand 791 Sand - Crushed 792 Natural Sand - Screened (for plaster work only) 793 Bricks II Class 794 Rubble stone excluding royalty 795 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 796 Aggregate 25 mm 797 Aggregate 20 mm 798 Aggregate 12 mm 799 Aggregate 10 mm 800 Aggregate 6 mm 801 Stone Dust 802 Soft Murum 803 Hard Murum 804 Water 805 White Cement 806 Plasticizer 807 Stainless Steel Plate 808 EMULSION RS1 ( Hincol) BULK 809 EMULSION RS1 ( Hincol) Packed 810 WASTE PLASTIC to be used in bituminous treatment as per IRC SP-098-2013 811 Portland Slag Cement (PSC) 812 Ground Granulated Blast Furnance Slag (GGBS) 813 Bitumen VG-40 (bulk (30-40 grade)) 814 Stone Boulder of size 150 mm and below at Cruser Plant 815 Supply of quarried stone 150 - 200 mm size for Hand Broken at site 816 Boulder with minimum size of 300 mm for Pitching at Site 817 Coarse sand at Mixing Plant 818 Coarse sand at Site 819 Murum at Site 820 Fly ash conforming to IS: 3812 ( Part II &I) atHMP Plant / Batching Plant / Crushing Plant 821 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) 822 Close graded Granular sub-base Material 53 mm to 9.5 mm 823 Close graded Granular sub-base Material37.5 mm to 9.5 mm 824 Close graded Granular sub-base Material26.5 mm to 9.5 mm 825 Close graded Granular sub-base Material9.5 mm to 4.75 mm 826 Close graded Granular sub-base Material9.5 mm to 2.36 mm 827 Close graded Granular sub-base Material 4.75mm to 2.36 mm 828 Close graded Granular sub-base Material 4.75mm to 75 micron mm 829 Close graded Granular sub-base Material2.36 mm 830 Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. 831 Coarse graded Granular sub-base Material2.36 mm & below 832 Coarse graded Granular sub-base Material4.75mm to 75 micron mm 833 Coarse graded Granular sub-base Material4.75 mm to 2.36 mm 834 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 835 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 836 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 837 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 838 Coarse graded Granular sub-base Material 53 mm to 26 .5mm 839 Aggregates below 5.6 mm 840 Aggregates 22.4 mm to 2.36 mm 841 Aggregates 22.4 mm to 5.6 mm 842 Aggregates 45 mm to 2.8 mm 843 Aggregates 45 mm to 22.4 mm 844 Aggregates 53 mm to 2.8 mm 845 Aggregates 53 mm to 22.4 mm 846 Aggregates 63 mm to 2.8 mm 847 Aggregates 63 mm to 45 mm 848 Aggregates 90 mm to 45 mm 849 Aggregates 10 mm to 5 mm 850 Aggregates 11.2 mm to 0.09 mm 851 Aggregates 13.2 mm to 0.09 mm 852 Aggregates 13.2 mm to 5.6 mm 853 Aggregates 13.2 mm to 10 mm 854 Aggregates 20 mm to 10 mm 855 Aggregates 25 mm to 10 mm 856 Aggregates 19 mm to 6 mm 857 Aggregates 37.5 mm to 19 mm 858 Aggregates 37.5 mm to 25 mm 859 Aggregates 6 mm nominal size 860 Aggregates 10 mm nominal size 861 Aggregates 13.2/12.5 mm nominal size 862 Aggregates 20 mm nominal size 863 Aggregates 25 mm nominal size 864 Aggregates 40 mm nominal size 865 Binding wire 866 Bitumen ( Cationic Emulsion ) 867 Bitumen VG-30 (bulk (60-70 grade)) 868 Bitumen VG -10 (bulk (80-100 grade )) 869 Bitumen (Cutback ) 870 Bitumen (emulsion) 871 Bitumen (modified graded) (bulk Cr-60) 872 Geo grids 873 Geomembrane 874 Geonets 875 Geotextile 876 Geotextile filter fabric 877 LDO 878 Pavement Marking Paint 879 RCC Pipes 200 mm dia, 2.5 m long for drainage 880 Quarry spall 881 Road Barricade Perforated fench(2000 x 1000 x 40 mm ) 882 Road Barricade Sand Fillable only 1 mtr.[1000(L) x 350(W) x 760(H) mm ] 883 Polypropylene multifilament woven geotextile fabric for filter layer (approved opening size 0.075mm & water permeability 9.00 Litres/Sqm/Second) 884 Polythene bags 885 Trap stones weighing upto 20 kilogram 886 Trap stones weighing from 20 to 50 kilogram 887 Trap stones weighing from 50 to 100 kilogram 888 Trap stones weighing from 100 to 200 kilogram 889 Trap stones weighing from 200 to 300 kilogram 890 Trap stones weighing from 300 to 500 kilogram 891 Trap stones weighing from 500 to 1000 kilogram 892 Trap stones weighing from 1000 kilogram and above 893 Laterite stones rubbles upto 20kilogram 894 Laterite stones rubbles from 20 to 50 kilogram 895 Laterite stones rubbles from 50 to 100 kilogram 896 Gabions boxes of mechanically woven hexagonal shaped wire mesh of type, 10 cm x 12 cm. edges mechanically selvedged (Zinc+ PVC) coated G.I. wires as per BS: 443, mesh wire dia. 3.00 mm, edge wire 3.70 mm size 897 a) Gabion size - 1.00 x 1.00 x 1.00 M 898 b) Gabion size - 1.50 x 1.00 x 1.00 M 899 c) Gabion size - 2.00 x 1.00 x 1.00 M 900 d) Gabion size - 3.00 x 1.00 x 1.00 M 901 e) Gabion size - 4.00 x 1.00 x 1.00 M 902 Flexible gabions of polypropylene material of 10 mm ø four strand mesh size of 150mm x 150 mm size 903 a) Gabion size - 1.00 x 1.00 x 1.00 M 904 b) Gabion size - 1.50 x 1.00 x 1.00 M 905 c) Gabion size - 2.00 x 1.00 x 1.00 M 906 d) Gabion size - 3.00 x 1.00 x 1.00 M 907 Used tyre fender 908 Geotextile bags of sizes 909 a) Geotextile bags size - 1.00 x 0.70 M 910 b) Geotextile bags size - 2.00 x 1.50 M 911 Geotextile tube of 20 metre long & 912 a) Geotextile tube diameter - 3.00 M 913 b) Geotextile tube diameter - 1.50 M
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
29.
Rural Development #10381465 Price Bid
Providing and Supplying various Different material and Machinery Servicesat Grampanchayat Malkhed Tal Haveli Dist Pune - 2 Centering Oil 3 Plastic Cover Block 4 R.C.C.Jali 50mm thick 5 Plastizer (Rheobuild) 825 RMt. 6 Concrete Spacer Block 15 mm 7 Concrete Spacer Block 20 mm 8 Concrete Spacer Block 25 mm 9 Concrete Spacer Block 30 / 40 mm 10 Anticorrrisive Primer Coat 11 Swaling Coat 12 PVC Coated GI Wire 13 Repairs to cut ends and damages with special liquid epoxy 14 Epoxy paint 15 R.C.C.Jali 80mm thick 16 Bricks (Red) 17 AAC Block 600x200x100 mm 18 Jointing Mortar 19 Fly ash Bricks 20 Corner stone 38*20*30cm 21 Khandakies 22 Pin Header (Standard Size) 23 Hollow Blocks C.C.0.2*0.2*0.4M 24 Hollow Blocks C.C.0.1*0.2*0.4M 25 Hollow Block C C 0.30 x 0.20 x 0.15 26 Siporex Block 75x240x650 mm 27 GBP Build Fast plus 28 Siporex Block 100x240x650 mm 29 Siporex Block 200x240x650 mm 30 Bitumen (Compound) 31 Brick bats 32 Water proof compound I.S 33 Tar Felt B.H.I.S.I.3mm thick 34 Acrylic Polymer Modified waterproofing Powder 35 Acrylic Polymer Modified Liquid 36 Fibre Glass Mesh 37 Bitumen 85/25 Grade 38 Bitumen 85/25 Grade Cold Primer 39 Grit (Add Below 5.6) 40 Bitumen Felt 41 Polydee-TP40 Primer 42 Polydee-TP40 Primer 43 Polydee-LM 44 Polydee-LM 150mm width 45 Bituflex Cloesdcell foam 30x30 mm 46 AG 10 Granules 47 Polydee-MC 48 Polydee-41 sealant and polyseal 49 Polydee-11 50 Bitumen Pad 25mm thick 1.20 x 1.20 Mtr 51 Neeru / Sanala 52 White Putty (Cement) 53 Texture Material 54 Rough Shahabad 25 to 30mm thick 55 Rough Shahabad 40 to 45 mm thick 56 Polished Shahabad 25 to 30mm thick 57 Rough Shahabad 50 to 60mm thick 58 Polished Shahabad 40 to 50mm thick For step 59 Polished Shahabad Machine cut 25mm thick 60 Polished Shahabad for step25mm thick 61 Tandoor Polished 25mm thick (Machine cut) 62 Tandoor Polished 25mm thick (Hand Cut) 63 Tandoor Polished for steps25mm thisk 64 Black Kadappa (one side polish) (Machine cut) 25 mm thick 65 Black Kadappa (one side polish) (Machine cut) 35mm thick 66 Both Sides Polished Kadappastone 25mm thick 67 Kota stone (Machine cut) upto 25-30mm thick one side polished 68 Kota stone (Hand cut) upto 25-30mm thick one side polished 69 Kota stone for step polished) upto 25mm thick (1.2*0.3M) 70 Ceramic tiles 30*30cm 71 Ceramic Antiskid Flooring Tiles 30 x 30 cm 72 Ceramic Tiles for dado 30 cm x 30 cm 73 Ceramic Tiles for dado 30 x 45 cm 74 Heavy duty interlocking concrete block 60mm thick gray 300 kg/sq.cm. 75 Heavy duty interlocking concrete block 60mm thick coloured 300kg/sq.cm 76 Heavy duty interlocking concrete block 80mm thick gray 300kg/sq.cm 77 Heavy duty interlocking concrete block 80mm thick coloured 300kg/sq.cm 78 Heavy duty interlocking concrete block 80mm thick rubber mould glossy 400kg/sq.cm 79 Heavy duty interlocking concrete block 40mm thick colour 200 kg/sq.cm 80 Telephone Black Granite 81 Green marble 82 Vitrified tiles Glossy Size 590 to 605 mm* 590 to 605 mm*8 to 10mm 83 Vitrifiedmatt finish - size 590 to 605 mm* 590 to 605 mm *8 to 10mm 84 Vitrified rustic matt stone finish size 590 to 605mm *590 to 605mm*8 to 10mm 85 Vertified stone effect finish size 590 to 605mm* 590 to 605mm * 8 to 10mm 86 Calcet Powder 87 Black Oxide powder 88 Fevi Matt Chemical 10 Kg Bag 89 Marble chips 90 Heavy duty interlocking concrete block 60mm thick rubber mould glossy 400kg/sq.cm 91 Tremix Treatment 100 mm thick 92 Marble mosaic chequered tiles (gray) 93 Colour cement 94 Heavy Duty Designer come. tile for flooring 95 Heavy Duty Designer come. tile for Steps 96 PVC flooring 97 Ceramic Tiles for dado 30 x 60 cm 98 Marble (other than white makrana) 99 Kota stone (Hand cut) upto 45-55mm thick one side polished 100 Vitrifiedmatt finish - size 895 to 900 mm* 895 to 900 mm *10 to 12 mm 101 Bees wax 102 Coal Tar 103 Common Spirit 104 French Polish 105 Varnish 106 Malemaine Polish 107 C.C.T.W. Ballies 125 mm Diameter 108 Oil enamel paint/flat/glossy paint(ready mix) (with I.S.I. Mark) 109 Synthetic paint (ready mix) 110 Catonic emulsion paint 111 White oil paint 100ml pack tin 112 Red Oxide paint 113 Cement paint 114 Steel Primer 115 Primer for plaster surface 116 Putty 117 Boiled linseed oil 118 Linseed oil double boiled 119 Terpentine 120 Wood Primer 121 Brush for lettring 122 Brush for road marking 5cm 123 Brush for marking road 8cm 124 Brush for road marking 10cm 125 Lustre paint 126 Textured Synthetic paint 127 White lead paint 128 Birla wall care putty 129 Aluminium Paint 130 Plastic emulsion paint 131 Acraylic Emulsion Paint 132 Exterior Primer 133 Weather shield paint 134 Neel 135 Oil bound distemper 136 Red powder / Geru 137 Saras 138 Scrapping sand paper size (30 * 20cm) 139 Dry distemper 140 Chunam / White lime Powder 141 paint Luster Paint 142 Roller Brush 143 Royale Luxury Emulsion Paint 144 Country Teak Wood 145 Ghana teak wood 146 Teak Wood planks above 2.5 m length 147 Teak wood bidding 1/2 * 1/2 148 T.W.Balli 100 mm dia 149 Jungle wood (non teak) normal 150 Bamboo 25mm dia.(4.5 to 6m) 151 Bamboo 50mm dia. 152 Bamboo Matting 1.2*1.8m 153 Ply wood 12mm thick 154 Ply wood 6mm thick 155 Mica laminate as per ISI 0.1 mm thick 156 Face Veneel board 4 mm thick 157 Particle board B.W.P.Phinol bond 12mm thick 158 Particle board B.W.P.Phinol bond 19 mm thick 159 Formica 1.5 mm thick 160 Tower bolt brass oxidised 10 mm dia length 150 mm 161 Ferical 162 Ply wood 18mm thick Commercial 163 Teak wood battens 50 * 25mm 164 Teak wood batten 25 mm * 12 mm 165 Veneer 3.5 to 4 mm thick 166 Alluminium rod 25mm dia 167 A.C.Corrugated sheet 6mm thick 168 A.C.Sheet ridge 169 A.C.Sheet plain 4mm thick 170 G.C.I. Sheet (Corrugated) 22 BWG 171 G.C.I. Sheet (Corrugated) 24 BWG 172 G.I. Sheet (plain) 22 BWG 173 G.I. Sheet (plain) 24 BWG 174 G.I.Washers 175 G.I. J or L hooks 6 mm dia. 176 Nails iron all size 177 Mangalore tiles class AA 178 Mangalore Ridge / Hip tiles 179 Mangalore Glass tiles 180 Mangalore Pattern cowl Ventilator 181 G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured Sheet 182 G.I. Pre coated Ridge Sheet 183 Gypsum powder 184 Aluminium Alloy plate 2mm thick 185 Aluminium sheeting fixed with encapsuled lens type reflective sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable. 186 Plaster Of Paris 187 Decorative Board of Fibrous Plaster of Paris 12 to 15 mm 188 Acoustic Board 12 mm thick 189 Gypsum Board 12.5 mm thick 190 UPVC 3 layer trapezoidal 2.00 mm sheet 191 Light weight calcium silicate tile of size 595 x 595 mm of texture spin stone / cosmos / plain / Glode fine fissured. 192 Bioguard Board 16 mm 193 Ultima tile 194 Optra tile 195 Proflex Sheet 1 mm 196 Sky light 2 mm thick 197 Hanger rod 4mm thick 198 level Adjustment clip size 85x30x0.8mm 199 Dash fastener 12.5mm dia 50mm long 200 Soffit cleat 25mmx35mmx1.60mm 201 Wooden Screws with plastic rawl plugs 35mmx8mm 202 Light weight calcium silicate tiles of size 595x595mm of texture Spintone for Tegular edge ceiling 203 Plain Zinc Sheet 204 UPVC ridge/hip tiles 205 Hanger wire (2.68 mm dia), 1.82 m long 206 Dune edge tiles 207 Fine fissured edge tiles 208 Turbo ventilator 24 209 Tarat 36 width ( Gunny Cloth) 210 Wire glass 211 Fire wood 212 Precoated Galvanised Steel Plain Sheet 213 Connecting clip for supports 214 Dry wall screws 25 mm 215 Jointing Compound 216 Jointing Tape 217 Minaral Fibre board 600 x 600 mm 218 Perimeter Channel 80 x 8 mm 219 Screws 1 12 220 Screws 1/2 221 Rawal Plug 222 Plain Zinc Sheet 0.50 mm thick 223 Aldrop 300*16mm Chromium Plated 224 Aldrop Iron Oxidise 300*16mm 225 Aldrop Stainless steel 300*16mm 226 Handle 125mm M.S. Chromium Plated 227 Handle 150mm Brass Chromium plated (Rounded Shape) 228 Handle Alluminium 125 mm 229 Iron hinges chromium plated 125mm 230 But Hinges Alluminium 125mm 231 G.I.Screw 50mm 232 G.I.Screw 25mm 233 Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty) 234 Tower bolt Aluminium 10mm dia.length 250mm 235 Tower bolt Aluminium 10mm dia.length 200mm 236 Tower bolt M.S. Chromium plated 10mm dia,length 300mm 237 Tower bolt M.S. Chromium plated 10mm dia,length 200mm 238 Cold Rolled Steel Hollow Section Door frame 1829*610mm 239 Aluminium stay 25cm 240 Aluminium stay 30cm 241 Jali fly proof 242 Jali chicken mesh 243 Jali welded mesh 25*25* 13 Guage 244 Jali welded mesh 25*25* 11 Guage 245 Jali welded mesh 50*25 13 Guage 246 Jali welded mesh 50*25 11 Guage 247 Hold fast Iron 300*40*5mm 248 Sliding Door Bolt Stainless Steel 12mm dia. 250mm length 249 Glass plain 3mm 250 Glass plain 5mm 251 Glass obscured (bajara) 5mm 252 G.I. Nut Bolt 253 Housing box to rolling shutter 254 Mechanical Gear For Rolling Shutter 255 Mortice lock superior 256 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side 257 Iron washer 12mm to 16mm 258 Aluminium Section 259 Nylon / PVC Gasket 260 Alluminium Screw 32 x 6 mm, 25 x 6 mm 261 Concealed locking arrangement of 100 mm length for sliding window 262 Alluminium Grill 7.50 mm thick 263 Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark 264 Iron Oxidized sliding door bolt 200 mm length, 12 mm dia 265 Powder and Chemicals for colour anodizing process of alluminium sections 266 Lock for Sliding Shutter 267 All Bearing Roller 268 All Frame Rail Angle 269 Welding Electrodes 270 C.R.C. Sheet 271 Abstrone Butadyne Styrine (ABS) Door Shutter including Transportation 272 Puff Insulation 35-40 Kg/Cumt. Density 273 PVC Door Shutter 34 mm thick Factory Made Shutter 274 FRP Door Shutter 30 mm thick Factory Made Shutter 275 FRP Door Shutter 35 mm thick Factory Made Shutter 276 Bison Pannel 277 PVC factory made solid panel door shutter with stainless steel fixutres & fastening 278 PVC factory made flush door 30 mm with stainless steel fixutres & fastening 279 Sliding door bolt Chromium plated 250mm 280 Acrylic Plain Sheet 3 mm 281 Aldrop Stainless steel 300*16mm 282 Aldrop Stainless steel 250*16 mm 283 Handle 150mm Stainless Steel (Rounded Shape) 284 Handle 200mm Stainless Steel (Rounded Shape) 285 Stainless Steel Hinges - 100mm 14 gauge (Heavy Duty) 286 Stainless Steel Hinges - 125mm 14 gauge(Heavy Duty) 287 Housing box to rolling shutter 288 Mechanical Gear For Rolling Shutter 289 Door StopperStainless Steel 290 Tower Bolt Stainless Steel 200 mm 291 Tower Bolt Stainless Steel 250 mm 292 Sliding Door Bolt Stainless Steel 250 mm 293 Handle Stainless Steel 100 mm 294 Eye Hole Lens 295 Rolling Shutter 296 Ply Wood 297 Stainless steel hooks and eyes 200 mm 298 Steel Window 299 Powder Coating 300 Rubber Lining 301 Ply wood 9 mm thick 302 Laminated board double 12mm thick 303 Alluminium Section anodized 304 Handle iron oxidised 150 mm 305 Hinges iron oxidised 100 mm 306 T. W. Particle board, both face laminated 12 mm 307 Battens T.W. 70 x 45 mm 308 Nuts and Bolts 309 Plain FRP Sheet 22 B.W.G. 310 TW Runner (6 x 3) 311 Alluminium Screw 312 F Patti 313 Teak wood planks above 2.5m length 314 Vision Panel 315 Solid core shutter 35 mm thick with commercial veneer facing and phenol bonded 316 Oil Paint 317 Acrylic Plain Sheet 2 mm thick 318 Aluminium Sheet 24 B.W.G 319 Alluminium Section with Powder Coating 320 Concealed lock 321 Mosquito proof Nylone net 322 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side with bidding patty 323 G.I. Pipe 100mm dia. Medium type 324 G.I. Pipe 100mm dia. Heavy type 325 G.I. Pipe 15mm dia. Medium type 326 G.I. Pipe 15mm dia. Heavy type 327 G.I. Pipe 20mm dia. Medium type 328 G.I. Pipe 20mm dia.Heavy type 329 G.I. Pipe 25mm dia. Medium type 330 G.I. Pipe 25mm dia. Heavy type 331 G.I. Pipe 32mm dia. Medium type 332 G.I. Pipe 32mm dia.Heavy type 333 G.I. Pipe 40mm dia. Medium type 334 G.I. Pipe 40mm dia. Heavy type 335 G.I. Pipe 50mm dia. Medium type 336 G.I. Pipe 50mm dia. Heavy type 337 G.I. Pipe 65mm dia. Medium type 338 G.I. Pipe 65mm dia. Heavy type 339 G.I. Pipe 80mm dia. Medium type 340 G.I. Pipe 80mm dia. Heavy type 341 PVC Nahani Trap 75 mm 342 G.I.Clamps 100mm to 150mm 343 PVC Nahani Trap 150 mm 344 G.I.Clamps 12mm to 32mm 345 G.I.Clamps 40mm to 80mm 346 Anglo Indian W.C. Pan Colour 347 G.I.Fixtures 348 P.V.C. Cowl 100 mm 349 G.I.Screws 30mm 350 G.I.Screws 40mm 351 G.I.Union 25mm dia. 352 Gully trap cover with frame 353 Gun Metal stop tap with crutch wheel 20mm 354 Gun metal stop tap with crutch wheel 25mm 355 Gun metal stop tap with crutch wheel 15mm 356 Gun metal stop tap with crutch wheel 20mm 357 C.I.Bend 75mm dia. 358 C.I.Bend 100mm dia. 359 C.I.Bip tap 12mm 360 C.I.Grating 150mm dia. 361 C.I.Grating 100mm dia. 362 C.I.Grating 75mm dia. 363 C.I.Brackets 364 C.I.Collers 100mm dia. 365 C.I.Copllers 75mm dia. 366 C.I.Cover 45*30 cm with frame 367 C.I.Cowl / Vent 100mm dia. 368 C.I.Cowl / Vent 150mm dia. 369 C.I.Cowl / Vent 75mm dia. 370 C.I.Hinged Cover with frame 371 C.I.Man hole cover 50 kg. 372 C.I.Man hole cover 75 kg. 373 C.I.Man hole cover 100 kg. 374 C.I.Man hole cover 175 kg.Heavy (0.9*0.45m) 375 C.I.Nahani trap 100mm dia.(375mm long) 376 C.I.Nahani trap 75 to 80mm dia.(375mm long) 377 C.I.100*75*300 long arm (wt. 6kg)nahani trap 378 C.I.Soil pipe 100mm dia. 379 C.I.Soil pipe 150mm dia. 380 C.I,Soil pipe 75 to 80mm dia. 381 C.I.Shoe 75 mm dia. 382 C.I. Shoe 100 mm dia. 383 C.I.Shoe 150mm 384 Ball cock 15mm dia.P.V.C.FLOAT 385 Ball cock 25mm dia.P.V.C.FLOAT 386 Ball cock 40mm dia.P.V.C.FLOAT 387 Ball cock 50mm dia.P.V.C.FLOAT 388 Bib cock stop tap brass heavy 15mm 389 Bib cock stop tap brass heavy 20mm 390 Bib cockstop tap brass heavy 25mm 391 Bib tap 12mm brass medium 392 Colour wash hand basin 55*40cm 393 Colour wash hand basin 63*45cm 394 White glazed wash basin 45*30cm 395 White glazed wash hand basin 55*50cm 396 P.V.C. flexible Waste Pipe 32 mm dia 397 White Glazed Wash Hand Basin 63 x 45 cm 398 Sink white glazed 45*20*30cm 399 Pedestal for wash basin (standard size) 400 C.C.Septic tank 0.9m dia.(2.5m long) 401 C.C.Septic tank 1.20m dia.(2.5m long) 402 C.I.Steps for manhole 403 C.I.Cover with frame (Gully trap) 404 C.I.Plug Bend 150MM dia. 405 Clamp for G.I.pipe 25mm 406 Colour European type W.C.Pan 407 European type glazed W.C.pan 408 W.C.PAN Coloured glazed 64CM.(Orissa) 409 W.C.PAN White glazed 58 CM.Indian 410 W.C.PAN White glazed 57.50 CM (Orissa) 411 Fibre flushing tank for W.C. 412 Flushing tank automatic Urinal 10ltr. C.I. 413 Flushing tank automatic Urinal 5ltr. (P.V.C.) 414 Low level flush pr. St. 10ltr. 415 Flat back Urinal 416 Stall Type Urinal 417 Lipped type Urinal 418 Coloured glazed full stall Urinal 419 Bleaching Powder 420 Potassium Permanganate 421 Nylon Brush 422 Duster 423 Plastic Bucket 424 Coir 425 Gunny Cloth 426 Kharata 427 Wheel stop tap brass 15mm 428 Wheel stop tap brass 20mm 429 Wheel stop tap brass 25mm 430 Socket brass for 32mm tap 431 Socket brass for 40mm tap 432 Socket brass for 50mm tap 433 Socket brass for 65mm tap 434 Socket for 100mm tap 435 Socket for 15mm tap 436 Socket for 20mm tap 437 Socket for 25mm tap 438 Socket for 32mm tap 439 Socket for 40mm tap 440 Socket for 50mm tap 441 Socket for 65mm tap 442 Socket for 80mm tap 443 Span Yarn 444 Strainer for 100mm 445 Strainer for 40mm 446 Strainer for 50mm 447 Strainer for 80mm 448 Strainer for 15mm 449 Strainer for 20mm 450 Strainer for 25mm 451 Stone ware pipe 100mm dia. 452 Stone ware pipe 150mm dia. 453 Stone ware pipe 225mm dia. 454 Stone ware glazed pipe half round 100mm dia. 455 Stop tap brass with crunch wheel 15mm dia. 456 Towel rod with clamps 16mm dia. 457 Mirror 40*50cm. With plastic frame 458 Brass T Thimble Socket 32mm dia. 459 Brass wheel stop tap 32mm dia. 460 Brass wheel stop tap 40mm dia. 461 Brass wheel stop tap 50mm dia. 462 Brass wheel stop tap 65mm dia. 463 Brass wheel stop tap 80mm dia. 464 Half turn flush cock 25mm dia. 465 12mm flexible inlet pipe connection 466 Bell mouth cover 100mm dia. 467 Box chamber with lock 0.6*0.45m 468 Brass nozzle pillar tap 12mm 469 Black bakelite seat to european closer 470 Concussion push button type gun metal tap 15 to 25mm dia. 471 Coupling cast Iron 100mm dia. 472 Coupling cast Iron 80mm dia. 473 Chromium plated 12mm dia.bib cock 474 C.I.Trap grating 15*10 cm 475 C.I.Y junction 100mm dia. 476 C.I.Y junction 150mm dia. 477 C.I.Y junction 75mm dia. 478 Enameled bend 40mm dia. 479 Ferrul for C.I.pipr 100mm 480 White glazed foot rest chequred 25*10 cm 481 Half round earthware pipe 100mm(60cm long) 482 Half round earthware pipe 150mm(60cm long) 483 Jute Rope 484 Half round chaina ware pipe 100mm(60cm long) 485 Lead pipe 32mm dia. 486 Mohagani seat with lid 487 Mosquito proof coupling 488 Non-return valve 15mm for water meter 489 Non-return valve 25mm for water meter 490 Non-return valve 20mm for water meter 491 Piller tap 12mm dia.chromium plated heavy 492 P.Trap and lead pipe upto 40mm dia. 493 Rubber gasket (25, 28 and 20 cm) 494 Rubber Incertion 495 Rubberised adhesive 496 Salt glazed stone ware gully trap (150*150mm) 497 Self project tap brass chromium plated 15mm 498 Sewer trap 499 Shower rose chromium plated brass 10cm 500 P.V.C. pipe 15mm dia.10kg/cm2 pressure(class IV) 501 P.V.C. pipe 20mm dia.10kg/cm2 pressure(class IV) 502 P.V.C. pipe 25mm dia.10kg/cm2 pressure(class IV) 503 P.V.C. pipe 32mm dia.10kg/cm2 pressure(class IV) 504 P.V.C. pipe 40mm dia.10kg/cm2 pressure(class IV) 505 P.V.C. pipe 50mm dia.10kg/cm2 pressure(class IV) 506 P.V.C. pipe 60mm dia.10kg/cm2 pressure(class IV) 507 P.V.C. pipe 75mm dia.4 kg/cm2 pressure(class II) 508 P.V.C. 75 mm Soil Pipe 6 Kg/cm2 Pressure 509 P.V.C. pipe 90mm dia.4 kg/cm2 pressure(class II) 510 P.V.C.pipe 110mm dia.4kg/cm2 pressure (class II) 511 P.V.C. 110 mm Rain Water Pipe 6Kg/cm2 Pressure 512 P.V.C. 110 mm Soil Pipe 6 Kg/cm2 Pressure 513 P.V.C.pipe 140mm dia.4kg/cm2 pressure (class II) 514 P.V.C.pipe 160mm dia.4kg/cm2 pressure (class II) 515 P.V.C.pipe 160mm dia.Soil Pipe 516 P.V.C.pipe 160mm dia. Rain Water Pipe 517 P.V.C.Socket 15mm dia. 518 P.V.C.Socket 20mm dia. 519 P.V.C.Socket 25mm dia. 520 P.V.C.Socket 32mm dia. 521 P.V.C.Socket 40mm dia. 522 P.V.C.Socket 50mm dia. 523 P.V.C.Socket 60mm dia. 524 P.V.C.Flushing tank (12 ltr. Capacity) 525 Flush valve 32mm dia. 526 Ferocret tank 527 Stainless Steel sink of size 600*510*200mmof nirali or equivalent make 528 C.P.pillar cock jaquar make continental (Cat.No. CON-011) 529 C.P.pillar cock (ISI)jaquar make continental 530 C.P.pillar cock long neck with aerator jaquar make continental (Cat.No. CON- 021) 531 C.P.Bib cock (ISI)jaquar make continental (Cat.No. CON-037) 532 C.P.Bib Cock long thread jaquar make continental (Cat.No. CON-039) 533 C.P.2-way bib cock jaquar make continental (Cat.No. CON-041) 534 C.P.bib cock with wall flange long thread jaquar make continental (Cat.No. CON- 047) 535 C.P.Bib cock with nozzle jaquar make continental (Cat.No. CON-049) 536 C.P.Angular stop cockjaquar make continental (Cat.No. CON-053) 537 C.P.Angular stop cock long thread jaquar make continental(Cat.No. CON-055) 538 C.P.angular stop cock with wall flange jaquar make continental(Cat.No. CON- 059) 539 C.P.central hole basin mixer without popup waste system with 450mm long braided hoses jaquar make continental (Cat.No. CON-167B) 540 C.P.wall mixer with telephone shower arragnementonly but without teltphone shower crutch jaquar make continental (Cat.No. CON-217) 541 C.p.wall mixer non-telephonic shower arrangement jaquar make continental (Cat.No. CON-219) 542 C.P.wall mixer(wall mounted model) with telephone shower arrangement only and with telephone shower crutch jaquar make continental (Cat.No. CON-267) 543 C.P.wall mixer with provision for overheadshower with 115mm long bend pipe and wall flange jaquar make continental (Cat.No. CON-273UPR) 544 C.P.sink mixer with swinging casted spout (wallmounted) jaquar make continental (Cat.No. CON-309) 545 C.P.sink mixer swinging spout (table mounted model) 450mm long braided hoses jaquar make continental (Cat.No. CON-309B) 546 C.P.sink cock with swinging casted spout jaquar make continental (Cat.No. CON- 347) 547 C.P.sink cock with raised J shaped swinging casted spout (table mounted) jaquar make continental (Cat.No. CON- 359) 548 C.p.shower arm 190mm long light body with wallflange jaquar make continental (Cat. No. SHA - 477) 549 C.P.Flush cock with wall flange 25mm with plain knob jaquar make continental (Cat.No. FLR 6081) 550 C.P.Towel rail 24 jaquar make continental (Cat. No. ACN 1111N ) 551 C.P.Towel ring square jaquar make continental (Cat. No. ACN 1121N ) 552 C.P.Soap dish hooker jaquar make continental (Cat. No. AKB 35731 ) 553 C.P.soap dish (polyurethane)jaquar make continental (Cat. No. AQN 7733 ) 554 C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751) 555 C.P.Toilet rack 24with lower hanger jaquar make continental (Cat. No. ACN 1181N) 556 C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563) 557 C.P.Pillar cock jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7011 ) 558 C.P.Bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT7037 ) 559 C.P.2-way bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7041) 560 C.P.Angular stop cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7053) 561 C.P.central hole basin mixer with regular spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7167bB ) 562 C.P.central hole basin mixer with regular spout with popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7169b ) 563 C.P.central hole basin mixer with small spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7171B) 564 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only but without crutchjaquar make queens collection(quarter turn filling) (Cat. No. QQT 7217 ) 565 C.P.wall mixer non-telephonic shower system jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7219 ) 566 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only and with telephone shower crutch jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7267) 567 Hydraulic door closer 568 cPVC pipe 15mm dia. 569 cPVC pipe 20mm dia. 570 cPVC pipe 25mm dia. 571 cPVC pipe 32mm dia. 572 cPVC pipe 40mm dia. 573 cPVC pipe 50mm dia. 574 cPVC Coupling for 15mm dia. 575 cPVC Coupling for 20mm dia. 576 cPVC Coupling for 25mm dia. 577 cPVC Coupling for 32mm dia. 578 cPVC Coupling for 40mm dia. 579 cPVC Coupling for 50mm dia. 580 Elbow 90 Degree for 15mm dia. 581 Elbow 90 Degree for 20mm dia. 582 Elbow 90 Degree for 25mm dia. 583 Elbow 90 Degree for 32mm dia. 584 Elbow 90 Degree for 40mm dia. 585 Elbow 90 Degree for 50mm dia. 586 Tee for 15mm dia. 587 Tee for 20mm dia. 588 Tee for 25mm dia. 589 Tee for 32mm dia. 590 Tee for 40mm dia. 591 Tee for 50mm dia. 592 End cap for 15mm dia. 593 End cap for 20mm dia. 594 End cap for 25mm dia. 595 End cap for 32mm dia. 596 End cap for 40mm dia. 597 End cap for 50mm dia. 598 Ball cock for 15mm dia. 599 Ball cock for 12mm dia. 600 Ball cock for 25mm dia. 601 Ball cock for 32mm dia. 602 Ball cock for 40mm dia. 603 Araldite adhesive 604 Ball valves for 50mm dia. 605 Male adapter (Brass Threads) for 15mm dia. 606 Male adapter (Brass Threads) for 20mm dia. 607 Male adapter (Brass Threads) for 25mm dia. 608 Male adapter (Brass Threads) for 32mm dia. 609 Male adapter (Brass Threads) for 40mm dia. 610 Male adapter (Brass Threads) for 50mm dia. 611 Male adapter (Plastic Threads) for 15mm dia. 612 Male adapter (Plastic Threads) for 20mm dia. 613 Male adapter (Plastic Threads) for 25mm dia. 614 Male adapter (Plastic Threads) for 32mm dia. 615 Male adapter (Plastic Threads) for 40mm dia. 616 Male adapter (Plastic Threads) for 50mm dia. 617 Female adapter (Brass Threads) for 15mm dia. 618 Female adapter (Brass Threads) for 20mm dia. 619 Female adapter (Brass Threads) for 25mm dia. 620 Female adapter (Brass Threads) for 32mm dia. 621 Female adapter (Brass Threads) for 40mm dia. 622 Female adapter (Brass Threads) for 50mm dia. 623 Female adapter (Plastic Threads) for 15mm dia. 624 Female adapter (Plastic Threads) for 20mm dia. 625 Female adapter (Plastic Threads) for 25mm dia. 626 Union for 15mm dia. 627 Union for 20mm dia. 628 Union for 25mm dia. 629 Union for 32mm dia. 630 Union for 40mm dia. 631 Union for 50mm dia. 632 Cross for 15mm dia. 633 Cross for 20mm dia. 634 Step over Bend 15mm dia. 635 Step over Bend 20mm dia. 636 Tee holder for 15mm dia. 637 Tee holder for 32mm dia. 638 End plug threaded for 15mm dia. 639 R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg 640 R.C.C.Chamber cover with frame 90cm*45cm Medium Duty 140kg 641 R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg 642 R.C.C.Chamber cover with frame 60cm*45cm Medium Duty 100kg 643 I.S.I.Ferrul Connection15mm dia. 644 I.S.I.Ferrul Connection 20mm dia. 645 I.S.I.Ferrul Connection 25mm dia. 646 I.S.I.Ferrul Connection 32mm dia. 647 I.S.I.Ferrul Connection 40mm dia. 648 I.S.I.Ferrul Connection 50mm dia. 649 Water meter 15 mm diameter 650 Water meter 20 mm diameter 651 Water meter 25 mm diameter 652 Water meter 40 mm diameter 653 Water meter 50 mm diameter 654 Water meter 80 mm diameter 655 Water meter 100 mm diameter 656 Non return Valve 40 mm diameter 657 Non return Valve 50 mm diameter 658 Non return Valve 80 mm diameter 659 Non return Valve 100 mm diameter 660 Colour Wash Hand Basin 0.45 x 0.30 661 White Glaze Earth Sink 0.6 x 0.2 x 0.45 662 Clamp for G.I.pipe 200mm 663 Earopean type glazed W.C.pan 68cm 664 Earopean white glazed earthen ware closet pan 665 P.V.C. Nahni Trap 666 P.V.C. Connector. 15 mm dia 667 Low level flushing cistern 668 Upvc sanitary pipes all 20 mm dia. 669 Upvc sanitary pipes all 75 mm dia. 670 Bib cock stop tap brass heavy 15mm 671 Stainless Steel sink of size 610 x 460 x 200 mm of nirali or equivalent make 672 Upvc sanitary pipes all 63 mm dia. 673 W.C.PAN Colour glazed 57.50 CM (Orissa) 674 Piller cock mixer & Angle cock 675 Upvc sanitary pipes all 25 mm dia. 676 Upvc sanitary pipes all 15 mm dia. 677 Cement 678 Upvc sanitary pipes all 40 mm dia. 679 Upvc sanitary pipes all 50 mm dia. 680 Stainless Steel sink of size 470 x 420 x 178 mm of nirali or equivalent make 681 Bib cock Long Arm 682 Bottletrap wash basin 32 mm Cromium Plated 683 Upvc sanitary pipes all 32 mm dia. 684 Hamp rope 685 Bib cock cock stop tap brass heavy 15 mm 686 Colour wash hand basin 45*30cm 687 Ultra 250 mm. dia. uPVC 90 degree junction chamber base with U trap 688 Ultra 250 mm.dia. uPVCCover & Frame 689 uPVC Blanking Plug 110 mm 690 uPVC 90 degree bend 691 Ultra Shaft 250x470mm 692 Water jet with accessories 693 White glazed full stall urinal 694 Glass plain 6mm thick 695 White Glazed Earthenware Squatting plate (Ladies Urinal) 696 Autoclosing pillar cock of pressmatic tap 697 PVC Aqua kraft type super bib tap 15 mm 698 PVC Aqua kraft type super Two Way bib tap 15 mm 699 Super push button type cock / tap with flange 15 mm 700 PVC Aqua kraft type super jet spray 15 mm 701 PVC Aqua kraft type super right angle stop tap 702 PVC Aqua kraft type super Pillar tap 15 mm 703 Fixing in CC BK Clamp, Battan 704 Wall Mounted European type glazed W.C.pan 705 Super wall sink type tap with flange 15 mm 706 Two Way bib tap with flange 707 super jet spray with flange 2 in 1 faucet 1.50 metre long 708 Chloryphyriphos 709 Solvent 710 D.D.V.P. 711 Malathion 712 Pine Oil 713 S.S. Pipe 40 mm dia 714 Mild Steel 715 Barbed Wire 716 Concentina Coil Wire 717 M.S.Steel 718 RCC Pole 719 Green marble 720 Telephone black granite 721 Karva (for roof and sides 10kg bundle) 722 Tatti 723 Bamboo 25mm dia. 724 Lightening Conductor 725 Salt 726 Copper Tape width 25mm*3mm thick 727 Aluminium Strips 50 mm x 3 mm 728 Cripped wire3 - 0 , 4 - 0 and 5 - 0 wide 729 Welding Electrodes 730 Welded Mesh 75 X 75 mm 731 Welded Mesh 150 X 150 mm 732 Tarat 36 width (Gunny cloth) 733 Chain link3 - 0 , 4 - 0 and 5 - 0 wide 734 Bamboo 50mm dia. 735 Hold Fast for Steel Gate 736 Nut Boldts 12 mm dia. /Nails all size 737 M.S. Pipe 40 mm dia 738 Welding Rod 739 PVC hand rail cover 740 Antitermite Liquid 741 Lock for Drawer/Cupboard 742 Glycel 743 Hing 744 Hot lime 745 Ladder 746 Fine tooth chisel 747 Saw 748 Gloves 749 R.C.C.Pipe 1200mm dia.(Np3)2.5m long 750 R.C.C.Pipe 1100mm dia.(Np3)2.5m long 751 R.C.C.Pipe 1000mm dia.(Np3)2.5m long 752 R.C.C.Pipe 900mm dia.(Np3)2.5m long 753 R.C.C.Pipe 800mm dia.(Np3)2.5m long 754 R.C.C.Pipe 700mm dia.(Np3)2.5m long 755 R.C.C.Pipe 600mm dia.(Np3)2.5m long 756 R.C.C.Pipe 500mm dia.(Np3)2.5m long 757 R.C.C.Pipe 450mm dia.(Np3)2.5m long 758 R.C.C.pipe Np2 class 1000mm dia. 2.5m long 759 R.C.C.Np2 Pipe Collar 1000 mm Dia. 760 R.C.C.pipe Np2 class 1200mm dia. 2.5m long 761 R.C.C.Np2 Pipe Collar 1200 mm Dia. 762 R.C.C.pipe Np2 class 1800mm dia. 2.5m long 763 R.C.C.pipe Np2 class 900mm dia. 2.5m long 764 R.C.C.Np2 Pipe Collar 900 mm Dia. 765 R.C.C.pipe Np2 class 800mm dia. 2.5m long 766 R.C.C.Np2 Pipe Collar 800 mm Dia. 767 R.C.C.pipe Np2 class 700mm dia. 2.5m long 768 R.C.C.pipe Np2 class 600mm dia. 2.5m long 769 R.C.C.Np2 Pipe Collar 600 mm Dia. 770 R.C.C.pipe Np2 class 500mm dia. 2.5m long 771 R.C.C.pipe Np2 class 450mm dia. 2.5m long 772 R.C.C.Np2 Pipe Collar 450 mm Dia. 773 R.C.C.pipe Np2 class 100mm dia. 2m long 774 R.C.C.pipe Np2 class 150mm dia. 2m long 775 R.C.C.pipe Np2 class 225mm dia. 2m long 776 R.C.C.pipe Np2 class 300mm dia. 2m long 777 RCC Pipe Np 4 heavy duty non presure pipe 1000 mm diameter 778 RCC Pipe Np4 heavy duty non presure pipe 1200 mm diameter 779 RCC Pipe Np4 heavy duty non presure pipe 900 mm diameter 780 Cement 781 Structural Steel 782 TMT FE - 500 783 HCRM/CRS Reinforcement 784 Bitumen VG 10 (Bulk) (80/100) 785 Bitumen VG 30 (Bulk) (60/70) 786 Bitumen VG 40 (Bulk) (30/40) 787 Bitumen VG 30 (Packed) (60/70) 788 Bitumen VG 40 (Packed) (30/40) 789 Bitumen VG 10 (Packed) (80/100) 790 Sand - Natural/V.S.I.(Vertical Shaft Impact Crusher)Quality Artifitial Sand 791 Sand - Crushed 792 Natural Sand - Screened (for plaster work only) 793 Bricks II Class 794 Rubble stone excluding royalty 795 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 796 Aggregate 25 mm 797 Aggregate 20 mm 798 Aggregate 12 mm 799 Aggregate 10 mm 800 Aggregate 6 mm 801 Stone Dust 802 Soft Murum 803 Hard Murum 804 Water 805 White Cement 806 Plasticizer 807 Stainless Steel Plate 808 EMULSION RS1 ( Hincol) BULK 809 EMULSION RS1 ( Hincol) Packed 810 WASTE PLASTIC to be used in bituminous treatment as per IRC SP-098-2013 811 Portland Slag Cement (PSC) 812 Ground Granulated Blast Furnance Slag (GGBS) 813 Bitumen VG-40 (bulk (30-40 grade)) 814 Stone Boulder of size 150 mm and below at Cruser Plant 815 Supply of quarried stone 150 - 200 mm size for Hand Broken at site 816 Boulder with minimum size of 300 mm for Pitching at Site 817 Coarse sand at Mixing Plant 818 Coarse sand at Site 819 Murum at Site 820 Fly ash conforming to IS: 3812 ( Part II &I) atHMP Plant / Batching Plant / Crushing Plant 821 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) 822 Close graded Granular sub-base Material 53 mm to 9.5 mm 823 Close graded Granular sub-base Material37.5 mm to 9.5 mm 824 Close graded Granular sub-base Material26.5 mm to 9.5 mm 825 Close graded Granular sub-base Material9.5 mm to 4.75 mm 826 Close graded Granular sub-base Material9.5 mm to 2.36 mm 827 Close graded Granular sub-base Material 4.75mm to 2.36 mm 828 Close graded Granular sub-base Material 4.75mm to 75 micron mm 829 Close graded Granular sub-base Material2.36 mm 830 Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. 831 Coarse graded Granular sub-base Material2.36 mm & below 832 Coarse graded Granular sub-base Material4.75mm to 75 micron mm 833 Coarse graded Granular sub-base Material4.75 mm to 2.36 mm 834 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 835 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 836 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 837 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 838 Coarse graded Granular sub-base Material 53 mm to 26 .5mm 839 Aggregates below 5.6 mm 840 Aggregates 22.4 mm to 2.36 mm 841 Aggregates 22.4 mm to 5.6 mm 842 Aggregates 45 mm to 2.8 mm 843 Aggregates 45 mm to 22.4 mm 844 Aggregates 53 mm to 2.8 mm 845 Aggregates 53 mm to 22.4 mm 846 Aggregates 63 mm to 2.8 mm 847 Aggregates 63 mm to 45 mm 848 Aggregates 90 mm to 45 mm 849 Aggregates 10 mm to 5 mm 850 Aggregates 11.2 mm to 0.09 mm 851 Aggregates 13.2 mm to 0.09 mm 852 Aggregates 13.2 mm to 5.6 mm 853 Aggregates 13.2 mm to 10 mm 854 Aggregates 20 mm to 10 mm 855 Aggregates 25 mm to 10 mm 856 Aggregates 19 mm to 6 mm 857 Aggregates 37.5 mm to 19 mm 858 Aggregates 37.5 mm to 25 mm 859 Aggregates 6 mm nominal size 860 Aggregates 10 mm nominal size 861 Aggregates 13.2/12.5 mm nominal size 862 Aggregates 20 mm nominal size 863 Aggregates 25 mm nominal size 864 Aggregates 40 mm nominal size 865 Binding wire 866 Bitumen ( Cationic Emulsion ) 867 Bitumen VG-30 (bulk (60-70 grade)) 868 Bitumen VG -10 (bulk (80-100 grade )) 869 Bitumen (Cutback ) 870 Bitumen (emulsion) 871 Bitumen (modified graded) (bulk Cr-60) 872 Geo grids 873 Geomembrane 874 Geonets 875 Geotextile 876 Geotextile filter fabric 877 LDO 878 Pavement Marking Paint 879 RCC Pipes 200 mm dia, 2.5 m long for drainage 880 Quarry spall 881 Road Barricade Perforated fench(2000 x 1000 x 40 mm ) 882 Road Barricade Sand Fillable only 1 mtr.[1000(L) x 350(W) x 760(H) mm ] 883 Polypropylene multifilament woven geotextile fabric for filter layer (approved opening size 0.075mm & water permeability 9.00 Litres/Sqm/Second) 884 Polythene bags 885 Trap stones weighing upto 20 kilogram 886 Trap stones weighing from 20 to 50 kilogram 887 Trap stones weighing from 50 to 100 kilogram 888 Trap stones weighing from 100 to 200 kilogram 889 Trap stones weighing from 200 to 300 kilogram 890 Trap stones weighing from 300 to 500 kilogram 891 Trap stones weighing from 500 to 1000 kilogram 892 Trap stones weighing from 1000 kilogram and above 893 Laterite stones rubbles upto 20kilogram 894 Laterite stones rubbles from 20 to 50 kilogram 895 Laterite stones rubbles from 50 to 100 kilogram 896 Gabions boxes of mechanically woven hexagonal shaped wire mesh of type, 10 cm x 12 cm. edges mechanically selvedged (Zinc+ PVC) coated G.I. wires as per BS: 443, mesh wire dia. 3.00 mm, edge wire 3.70 mm size 897 a) Gabion size - 1.00 x 1.00 x 1.00 M 898 b) Gabion size - 1.50 x 1.00 x 1.00 M 899 c) Gabion size - 2.00 x 1.00 x 1.00 M 900 d) Gabion size - 3.00 x 1.00 x 1.00 M 901 e) Gabion size - 4.00 x 1.00 x 1.00 M 902 Flexible gabions of polypropylene material of 10 mm ø four strand mesh size of 150mm x 150 mm size 903 a) Gabion size - 1.00 x 1.00 x 1.00 M 904 b) Gabion size - 1.50 x 1.00 x 1.00 M 905 c) Gabion size - 2.00 x 1.00 x 1.00 M 906 d) Gabion size - 3.00 x 1.00 x 1.00 M 907 Used tyre fender 908 Geotextile bags of sizes 909 a) Geotextile bags size - 1.00 x 0.70 M 910 b) Geotextile bags size - 2.00 x 1.50 M 911 Geotextile tube of 20 metre long & 912 a) Geotextile tube diameter - 3.00 M 913 b) Geotextile tube diameter - 1.50 M
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
30.
Rural Development #10381174 Price Bid
Providing and Supplying various Different material and Machinery Servicesat Grampanchayat Aaglambe Tal Haveli Dist Pune - 2 Centering Oil 3 Plastic Cover Block 4 R.C.C.Jali 50mm thick 5 Plastizer (Rheobuild) 825 RMt. 6 Concrete Spacer Block 15 mm 7 Concrete Spacer Block 20 mm 8 Concrete Spacer Block 25 mm 9 Concrete Spacer Block 30 / 40 mm 10 Anticorrrisive Primer Coat 11 Swaling Coat 12 PVC Coated GI Wire 13 Repairs to cut ends and damages with special liquid epoxy 14 Epoxy paint 15 R.C.C.Jali 80mm thick 16 Bricks (Red) 17 AAC Block 600x200x100 mm 18 Jointing Mortar 19 Fly ash Bricks 20 Corner stone 38*20*30cm 21 Khandakies 22 Pin Header (Standard Size) 23 Hollow Blocks C.C.0.2*0.2*0.4M 24 Hollow Blocks C.C.0.1*0.2*0.4M 25 Hollow Block C C 0.30 x 0.20 x 0.15 26 Siporex Block 75x240x650 mm 27 GBP Build Fast plus 28 Siporex Block 100x240x650 mm 29 Siporex Block 200x240x650 mm 30 Bitumen (Compound) 31 Brick bats 32 Water proof compound I.S 33 Tar Felt B.H.I.S.I.3mm thick 34 Acrylic Polymer Modified waterproofing Powder 35 Acrylic Polymer Modified Liquid 36 Fibre Glass Mesh 37 Bitumen 85/25 Grade 38 Bitumen 85/25 Grade Cold Primer 39 Grit (Add Below 5.6) 40 Bitumen Felt 41 Polydee-TP40 Primer 42 Polydee-TP40 Primer 43 Polydee-LM 44 Polydee-LM 150mm width 45 Bituflex Cloesdcell foam 30x30 mm 46 AG 10 Granules 47 Polydee-MC 48 Polydee-41 sealant and polyseal 49 Polydee-11 50 Bitumen Pad 25mm thick 1.20 x 1.20 Mtr 51 Neeru / Sanala 52 White Putty (Cement) 53 Texture Material 54 Rough Shahabad 25 to 30mm thick 55 Rough Shahabad 40 to 45 mm thick 56 Polished Shahabad 25 to 30mm thick 57 Rough Shahabad 50 to 60mm thick 58 Polished Shahabad 40 to 50mm thick For step 59 Polished Shahabad Machine cut 25mm thick 60 Polished Shahabad for step25mm thick 61 Tandoor Polished 25mm thick (Machine cut) 62 Tandoor Polished 25mm thick (Hand Cut) 63 Tandoor Polished for steps25mm thisk 64 Black Kadappa (one side polish) (Machine cut) 25 mm thick 65 Black Kadappa (one side polish) (Machine cut) 35mm thick 66 Both Sides Polished Kadappastone 25mm thick 67 Kota stone (Machine cut) upto 25-30mm thick one side polished 68 Kota stone (Hand cut) upto 25-30mm thick one side polished 69 Kota stone for step polished) upto 25mm thick (1.2*0.3M) 70 Ceramic tiles 30*30cm 71 Ceramic Antiskid Flooring Tiles 30 x 30 cm 72 Ceramic Tiles for dado 30 cm x 30 cm 73 Ceramic Tiles for dado 30 x 45 cm 74 Heavy duty interlocking concrete block 60mm thick gray 300 kg/sq.cm. 75 Heavy duty interlocking concrete block 60mm thick coloured 300kg/sq.cm 76 Heavy duty interlocking concrete block 80mm thick gray 300kg/sq.cm 77 Heavy duty interlocking concrete block 80mm thick coloured 300kg/sq.cm 78 Heavy duty interlocking concrete block 80mm thick rubber mould glossy 400kg/sq.cm 79 Heavy duty interlocking concrete block 40mm thick colour 200 kg/sq.cm 80 Telephone Black Granite 81 Green marble 82 Vitrified tiles Glossy Size 590 to 605 mm* 590 to 605 mm*8 to 10mm 83 Vitrifiedmatt finish - size 590 to 605 mm* 590 to 605 mm *8 to 10mm 84 Vitrified rustic matt stone finish size 590 to 605mm *590 to 605mm*8 to 10mm 85 Vertified stone effect finish size 590 to 605mm* 590 to 605mm * 8 to 10mm 86 Calcet Powder 87 Black Oxide powder 88 Fevi Matt Chemical 10 Kg Bag 89 Marble chips 90 Heavy duty interlocking concrete block 60mm thick rubber mould glossy 400kg/sq.cm 91 Tremix Treatment 100 mm thick 92 Marble mosaic chequered tiles (gray) 93 Colour cement 94 Heavy Duty Designer come. tile for flooring 95 Heavy Duty Designer come. tile for Steps 96 PVC flooring 97 Ceramic Tiles for dado 30 x 60 cm 98 Marble (other than white makrana) 99 Kota stone (Hand cut) upto 45-55mm thick one side polished 100 Vitrifiedmatt finish - size 895 to 900 mm* 895 to 900 mm *10 to 12 mm 101 Bees wax 102 Coal Tar 103 Common Spirit 104 French Polish 105 Varnish 106 Malemaine Polish 107 C.C.T.W. Ballies 125 mm Diameter 108 Oil enamel paint/flat/glossy paint(ready mix) (with I.S.I. Mark) 109 Synthetic paint (ready mix) 110 Catonic emulsion paint 111 White oil paint 100ml pack tin 112 Red Oxide paint 113 Cement paint 114 Steel Primer 115 Primer for plaster surface 116 Putty 117 Boiled linseed oil 118 Linseed oil double boiled 119 Terpentine 120 Wood Primer 121 Brush for lettring 122 Brush for road marking 5cm 123 Brush for marking road 8cm 124 Brush for road marking 10cm 125 Lustre paint 126 Textured Synthetic paint 127 White lead paint 128 Birla wall care putty 129 Aluminium Paint 130 Plastic emulsion paint 131 Acraylic Emulsion Paint 132 Exterior Primer 133 Weather shield paint 134 Neel 135 Oil bound distemper 136 Red powder / Geru 137 Saras 138 Scrapping sand paper size (30 * 20cm) 139 Dry distemper 140 Chunam / White lime Powder 141 paint Luster Paint 142 Roller Brush 143 Royale Luxury Emulsion Paint 144 Country Teak Wood 145 Ghana teak wood 146 Teak Wood planks above 2.5 m length 147 Teak wood bidding 1/2 * 1/2 148 T.W.Balli 100 mm dia 149 Jungle wood (non teak) normal 150 Bamboo 25mm dia.(4.5 to 6m) 151 Bamboo 50mm dia. 152 Bamboo Matting 1.2*1.8m 153 Ply wood 12mm thick 154 Ply wood 6mm thick 155 Mica laminate as per ISI 0.1 mm thick 156 Face Veneel board 4 mm thick 157 Particle board B.W.P.Phinol bond 12mm thick 158 Particle board B.W.P.Phinol bond 19 mm thick 159 Formica 1.5 mm thick 160 Tower bolt brass oxidised 10 mm dia length 150 mm 161 Ferical 162 Ply wood 18mm thick Commercial 163 Teak wood battens 50 * 25mm 164 Teak wood batten 25 mm * 12 mm 165 Veneer 3.5 to 4 mm thick 166 Alluminium rod 25mm dia 167 A.C.Corrugated sheet 6mm thick 168 A.C.Sheet ridge 169 A.C.Sheet plain 4mm thick 170 G.C.I. Sheet (Corrugated) 22 BWG 171 G.C.I. Sheet (Corrugated) 24 BWG 172 G.I. Sheet (plain) 22 BWG 173 G.I. Sheet (plain) 24 BWG 174 G.I.Washers 175 G.I. J or L hooks 6 mm dia. 176 Nails iron all size 177 Mangalore tiles class AA 178 Mangalore Ridge / Hip tiles 179 Mangalore Glass tiles 180 Mangalore Pattern cowl Ventilator 181 G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured Sheet 182 G.I. Pre coated Ridge Sheet 183 Gypsum powder 184 Aluminium Alloy plate 2mm thick 185 Aluminium sheeting fixed with encapsuled lens type reflective sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable. 186 Plaster Of Paris 187 Decorative Board of Fibrous Plaster of Paris 12 to 15 mm 188 Acoustic Board 12 mm thick 189 Gypsum Board 12.5 mm thick 190 UPVC 3 layer trapezoidal 2.00 mm sheet 191 Light weight calcium silicate tile of size 595 x 595 mm of texture spin stone / cosmos / plain / Glode fine fissured. 192 Bioguard Board 16 mm 193 Ultima tile 194 Optra tile 195 Proflex Sheet 1 mm 196 Sky light 2 mm thick 197 Hanger rod 4mm thick 198 level Adjustment clip size 85x30x0.8mm 199 Dash fastener 12.5mm dia 50mm long 200 Soffit cleat 25mmx35mmx1.60mm 201 Wooden Screws with plastic rawl plugs 35mmx8mm 202 Light weight calcium silicate tiles of size 595x595mm of texture Spintone for Tegular edge ceiling 203 Plain Zinc Sheet 204 UPVC ridge/hip tiles 205 Hanger wire (2.68 mm dia), 1.82 m long 206 Dune edge tiles 207 Fine fissured edge tiles 208 Turbo ventilator 24 209 Tarat 36 width ( Gunny Cloth) 210 Wire glass 211 Fire wood 212 Precoated Galvanised Steel Plain Sheet 213 Connecting clip for supports 214 Dry wall screws 25 mm 215 Jointing Compound 216 Jointing Tape 217 Minaral Fibre board 600 x 600 mm 218 Perimeter Channel 80 x 8 mm 219 Screws 1 12 220 Screws 1/2 221 Rawal Plug 222 Plain Zinc Sheet 0.50 mm thick 223 Aldrop 300*16mm Chromium Plated 224 Aldrop Iron Oxidise 300*16mm 225 Aldrop Stainless steel 300*16mm 226 Handle 125mm M.S. Chromium Plated 227 Handle 150mm Brass Chromium plated (Rounded Shape) 228 Handle Alluminium 125 mm 229 Iron hinges chromium plated 125mm 230 But Hinges Alluminium 125mm 231 G.I.Screw 50mm 232 G.I.Screw 25mm 233 Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty) 234 Tower bolt Aluminium 10mm dia.length 250mm 235 Tower bolt Aluminium 10mm dia.length 200mm 236 Tower bolt M.S. Chromium plated 10mm dia,length 300mm 237 Tower bolt M.S. Chromium plated 10mm dia,length 200mm 238 Cold Rolled Steel Hollow Section Door frame 1829*610mm 239 Aluminium stay 25cm 240 Aluminium stay 30cm 241 Jali fly proof 242 Jali chicken mesh 243 Jali welded mesh 25*25* 13 Guage 244 Jali welded mesh 25*25* 11 Guage 245 Jali welded mesh 50*25 13 Guage 246 Jali welded mesh 50*25 11 Guage 247 Hold fast Iron 300*40*5mm 248 Sliding Door Bolt Stainless Steel 12mm dia. 250mm length 249 Glass plain 3mm 250 Glass plain 5mm 251 Glass obscured (bajara) 5mm 252 G.I. Nut Bolt 253 Housing box to rolling shutter 254 Mechanical Gear For Rolling Shutter 255 Mortice lock superior 256 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side 257 Iron washer 12mm to 16mm 258 Aluminium Section 259 Nylon / PVC Gasket 260 Alluminium Screw 32 x 6 mm, 25 x 6 mm 261 Concealed locking arrangement of 100 mm length for sliding window 262 Alluminium Grill 7.50 mm thick 263 Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark 264 Iron Oxidized sliding door bolt 200 mm length, 12 mm dia 265 Powder and Chemicals for colour anodizing process of alluminium sections 266 Lock for Sliding Shutter 267 All Bearing Roller 268 All Frame Rail Angle 269 Welding Electrodes 270 C.R.C. Sheet 271 Abstrone Butadyne Styrine (ABS) Door Shutter including Transportation 272 Puff Insulation 35-40 Kg/Cumt. Density 273 PVC Door Shutter 34 mm thick Factory Made Shutter 274 FRP Door Shutter 30 mm thick Factory Made Shutter 275 FRP Door Shutter 35 mm thick Factory Made Shutter 276 Bison Pannel 277 PVC factory made solid panel door shutter with stainless steel fixutres & fastening 278 PVC factory made flush door 30 mm with stainless steel fixutres & fastening 279 Sliding door bolt Chromium plated 250mm 280 Acrylic Plain Sheet 3 mm 281 Aldrop Stainless steel 300*16mm 282 Aldrop Stainless steel 250*16 mm 283 Handle 150mm Stainless Steel (Rounded Shape) 284 Handle 200mm Stainless Steel (Rounded Shape) 285 Stainless Steel Hinges - 100mm 14 gauge (Heavy Duty) 286 Stainless Steel Hinges - 125mm 14 gauge(Heavy Duty) 287 Housing box to rolling shutter 288 Mechanical Gear For Rolling Shutter 289 Door StopperStainless Steel 290 Tower Bolt Stainless Steel 200 mm 291 Tower Bolt Stainless Steel 250 mm 292 Sliding Door Bolt Stainless Steel 250 mm 293 Handle Stainless Steel 100 mm 294 Eye Hole Lens 295 Rolling Shutter 296 Ply Wood 297 Stainless steel hooks and eyes 200 mm 298 Steel Window 299 Powder Coating 300 Rubber Lining 301 Ply wood 9 mm thick 302 Laminated board double 12mm thick 303 Alluminium Section anodized 304 Handle iron oxidised 150 mm 305 Hinges iron oxidised 100 mm 306 T. W. Particle board, both face laminated 12 mm 307 Battens T.W. 70 x 45 mm 308 Nuts and Bolts 309 Plain FRP Sheet 22 B.W.G. 310 TW Runner (6 x 3) 311 Alluminium Screw 312 F Patti 313 Teak wood planks above 2.5m length 314 Vision Panel 315 Solid core shutter 35 mm thick with commercial veneer facing and phenol bonded 316 Oil Paint 317 Acrylic Plain Sheet 2 mm thick 318 Aluminium Sheet 24 B.W.G 319 Alluminium Section with Powder Coating 320 Concealed lock 321 Mosquito proof Nylone net 322 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side with bidding patty 323 G.I. Pipe 100mm dia. Medium type 324 G.I. Pipe 100mm dia. Heavy type 325 G.I. Pipe 15mm dia. Medium type 326 G.I. Pipe 15mm dia. Heavy type 327 G.I. Pipe 20mm dia. Medium type 328 G.I. Pipe 20mm dia.Heavy type 329 G.I. Pipe 25mm dia. Medium type 330 G.I. Pipe 25mm dia. Heavy type 331 G.I. Pipe 32mm dia. Medium type 332 G.I. Pipe 32mm dia.Heavy type 333 G.I. Pipe 40mm dia. Medium type 334 G.I. Pipe 40mm dia. Heavy type 335 G.I. Pipe 50mm dia. Medium type 336 G.I. Pipe 50mm dia. Heavy type 337 G.I. Pipe 65mm dia. Medium type 338 G.I. Pipe 65mm dia. Heavy type 339 G.I. Pipe 80mm dia. Medium type 340 G.I. Pipe 80mm dia. Heavy type 341 PVC Nahani Trap 75 mm 342 G.I.Clamps 100mm to 150mm 343 PVC Nahani Trap 150 mm 344 G.I.Clamps 12mm to 32mm 345 G.I.Clamps 40mm to 80mm 346 Anglo Indian W.C. Pan Colour 347 G.I.Fixtures 348 P.V.C. Cowl 100 mm 349 G.I.Screws 30mm 350 G.I.Screws 40mm 351 G.I.Union 25mm dia. 352 Gully trap cover with frame 353 Gun Metal stop tap with crutch wheel 20mm 354 Gun metal stop tap with crutch wheel 25mm 355 Gun metal stop tap with crutch wheel 15mm 356 Gun metal stop tap with crutch wheel 20mm 357 C.I.Bend 75mm dia. 358 C.I.Bend 100mm dia. 359 C.I.Bip tap 12mm 360 C.I.Grating 150mm dia. 361 C.I.Grating 100mm dia. 362 C.I.Grating 75mm dia. 363 C.I.Brackets 364 C.I.Collers 100mm dia. 365 C.I.Copllers 75mm dia. 366 C.I.Cover 45*30 cm with frame 367 C.I.Cowl / Vent 100mm dia. 368 C.I.Cowl / Vent 150mm dia. 369 C.I.Cowl / Vent 75mm dia. 370 C.I.Hinged Cover with frame 371 C.I.Man hole cover 50 kg. 372 C.I.Man hole cover 75 kg. 373 C.I.Man hole cover 100 kg. 374 C.I.Man hole cover 175 kg.Heavy (0.9*0.45m) 375 C.I.Nahani trap 100mm dia.(375mm long) 376 C.I.Nahani trap 75 to 80mm dia.(375mm long) 377 C.I.100*75*300 long arm (wt. 6kg)nahani trap 378 C.I.Soil pipe 100mm dia. 379 C.I.Soil pipe 150mm dia. 380 C.I,Soil pipe 75 to 80mm dia. 381 C.I.Shoe 75 mm dia. 382 C.I. Shoe 100 mm dia. 383 C.I.Shoe 150mm 384 Ball cock 15mm dia.P.V.C.FLOAT 385 Ball cock 25mm dia.P.V.C.FLOAT 386 Ball cock 40mm dia.P.V.C.FLOAT 387 Ball cock 50mm dia.P.V.C.FLOAT 388 Bib cock stop tap brass heavy 15mm 389 Bib cock stop tap brass heavy 20mm 390 Bib cockstop tap brass heavy 25mm 391 Bib tap 12mm brass medium 392 Colour wash hand basin 55*40cm 393 Colour wash hand basin 63*45cm 394 White glazed wash basin 45*30cm 395 White glazed wash hand basin 55*50cm 396 P.V.C. flexible Waste Pipe 32 mm dia 397 White Glazed Wash Hand Basin 63 x 45 cm 398 Sink white glazed 45*20*30cm 399 Pedestal for wash basin (standard size) 400 C.C.Septic tank 0.9m dia.(2.5m long) 401 C.C.Septic tank 1.20m dia.(2.5m long) 402 C.I.Steps for manhole 403 C.I.Cover with frame (Gully trap) 404 C.I.Plug Bend 150MM dia. 405 Clamp for G.I.pipe 25mm 406 Colour European type W.C.Pan 407 European type glazed W.C.pan 408 W.C.PAN Coloured glazed 64CM.(Orissa) 409 W.C.PAN White glazed 58 CM.Indian 410 W.C.PAN White glazed 57.50 CM (Orissa) 411 Fibre flushing tank for W.C. 412 Flushing tank automatic Urinal 10ltr. C.I. 413 Flushing tank automatic Urinal 5ltr. (P.V.C.) 414 Low level flush pr. St. 10ltr. 415 Flat back Urinal 416 Stall Type Urinal 417 Lipped type Urinal 418 Coloured glazed full stall Urinal 419 Bleaching Powder 420 Potassium Permanganate 421 Nylon Brush 422 Duster 423 Plastic Bucket 424 Coir 425 Gunny Cloth 426 Kharata 427 Wheel stop tap brass 15mm 428 Wheel stop tap brass 20mm 429 Wheel stop tap brass 25mm 430 Socket brass for 32mm tap 431 Socket brass for 40mm tap 432 Socket brass for 50mm tap 433 Socket brass for 65mm tap 434 Socket for 100mm tap 435 Socket for 15mm tap 436 Socket for 20mm tap 437 Socket for 25mm tap 438 Socket for 32mm tap 439 Socket for 40mm tap 440 Socket for 50mm tap 441 Socket for 65mm tap 442 Socket for 80mm tap 443 Span Yarn 444 Strainer for 100mm 445 Strainer for 40mm 446 Strainer for 50mm 447 Strainer for 80mm 448 Strainer for 15mm 449 Strainer for 20mm 450 Strainer for 25mm 451 Stone ware pipe 100mm dia. 452 Stone ware pipe 150mm dia. 453 Stone ware pipe 225mm dia. 454 Stone ware glazed pipe half round 100mm dia. 455 Stop tap brass with crunch wheel 15mm dia. 456 Towel rod with clamps 16mm dia. 457 Mirror 40*50cm. With plastic frame 458 Brass T Thimble Socket 32mm dia. 459 Brass wheel stop tap 32mm dia. 460 Brass wheel stop tap 40mm dia. 461 Brass wheel stop tap 50mm dia. 462 Brass wheel stop tap 65mm dia. 463 Brass wheel stop tap 80mm dia. 464 Half turn flush cock 25mm dia. 465 12mm flexible inlet pipe connection 466 Bell mouth cover 100mm dia. 467 Box chamber with lock 0.6*0.45m 468 Brass nozzle pillar tap 12mm 469 Black bakelite seat to european closer 470 Concussion push button type gun metal tap 15 to 25mm dia. 471 Coupling cast Iron 100mm dia. 472 Coupling cast Iron 80mm dia. 473 Chromium plated 12mm dia.bib cock 474 C.I.Trap grating 15*10 cm 475 C.I.Y junction 100mm dia. 476 C.I.Y junction 150mm dia. 477 C.I.Y junction 75mm dia. 478 Enameled bend 40mm dia. 479 Ferrul for C.I.pipr 100mm 480 White glazed foot rest chequred 25*10 cm 481 Half round earthware pipe 100mm(60cm long) 482 Half round earthware pipe 150mm(60cm long) 483 Jute Rope 484 Half round chaina ware pipe 100mm(60cm long) 485 Lead pipe 32mm dia. 486 Mohagani seat with lid 487 Mosquito proof coupling 488 Non-return valve 15mm for water meter 489 Non-return valve 25mm for water meter 490 Non-return valve 20mm for water meter 491 Piller tap 12mm dia.chromium plated heavy 492 P.Trap and lead pipe upto 40mm dia. 493 Rubber gasket (25, 28 and 20 cm) 494 Rubber Incertion 495 Rubberised adhesive 496 Salt glazed stone ware gully trap (150*150mm) 497 Self project tap brass chromium plated 15mm 498 Sewer trap 499 Shower rose chromium plated brass 10cm 500 P.V.C. pipe 15mm dia.10kg/cm2 pressure(class IV) 501 P.V.C. pipe 20mm dia.10kg/cm2 pressure(class IV) 502 P.V.C. pipe 25mm dia.10kg/cm2 pressure(class IV) 503 P.V.C. pipe 32mm dia.10kg/cm2 pressure(class IV) 504 P.V.C. pipe 40mm dia.10kg/cm2 pressure(class IV) 505 P.V.C. pipe 50mm dia.10kg/cm2 pressure(class IV) 506 P.V.C. pipe 60mm dia.10kg/cm2 pressure(class IV) 507 P.V.C. pipe 75mm dia.4 kg/cm2 pressure(class II) 508 P.V.C. 75 mm Soil Pipe 6 Kg/cm2 Pressure 509 P.V.C. pipe 90mm dia.4 kg/cm2 pressure(class II) 510 P.V.C.pipe 110mm dia.4kg/cm2 pressure (class II) 511 P.V.C. 110 mm Rain Water Pipe 6Kg/cm2 Pressure 512 P.V.C. 110 mm Soil Pipe 6 Kg/cm2 Pressure 513 P.V.C.pipe 140mm dia.4kg/cm2 pressure (class II) 514 P.V.C.pipe 160mm dia.4kg/cm2 pressure (class II) 515 P.V.C.pipe 160mm dia.Soil Pipe 516 P.V.C.pipe 160mm dia. Rain Water Pipe 517 P.V.C.Socket 15mm dia. 518 P.V.C.Socket 20mm dia. 519 P.V.C.Socket 25mm dia. 520 P.V.C.Socket 32mm dia. 521 P.V.C.Socket 40mm dia. 522 P.V.C.Socket 50mm dia. 523 P.V.C.Socket 60mm dia. 524 P.V.C.Flushing tank (12 ltr. Capacity) 525 Flush valve 32mm dia. 526 Ferocret tank 527 Stainless Steel sink of size 600*510*200mmof nirali or equivalent make 528 C.P.pillar cock jaquar make continental (Cat.No. CON-011) 529 C.P.pillar cock (ISI)jaquar make continental 530 C.P.pillar cock long neck with aerator jaquar make continental (Cat.No. CON- 021) 531 C.P.Bib cock (ISI)jaquar make continental (Cat.No. CON-037) 532 C.P.Bib Cock long thread jaquar make continental (Cat.No. CON-039) 533 C.P.2-way bib cock jaquar make continental (Cat.No. CON-041) 534 C.P.bib cock with wall flange long thread jaquar make continental (Cat.No. CON- 047) 535 C.P.Bib cock with nozzle jaquar make continental (Cat.No. CON-049) 536 C.P.Angular stop cockjaquar make continental (Cat.No. CON-053) 537 C.P.Angular stop cock long thread jaquar make continental(Cat.No. CON-055) 538 C.P.angular stop cock with wall flange jaquar make continental(Cat.No. CON- 059) 539 C.P.central hole basin mixer without popup waste system with 450mm long braided hoses jaquar make continental (Cat.No. CON-167B) 540 C.P.wall mixer with telephone shower arragnementonly but without teltphone shower crutch jaquar make continental (Cat.No. CON-217) 541 C.p.wall mixer non-telephonic shower arrangement jaquar make continental (Cat.No. CON-219) 542 C.P.wall mixer(wall mounted model) with telephone shower arrangement only and with telephone shower crutch jaquar make continental (Cat.No. CON-267) 543 C.P.wall mixer with provision for overheadshower with 115mm long bend pipe and wall flange jaquar make continental (Cat.No. CON-273UPR) 544 C.P.sink mixer with swinging casted spout (wallmounted) jaquar make continental (Cat.No. CON-309) 545 C.P.sink mixer swinging spout (table mounted model) 450mm long braided hoses jaquar make continental (Cat.No. CON-309B) 546 C.P.sink cock with swinging casted spout jaquar make continental (Cat.No. CON- 347) 547 C.P.sink cock with raised J shaped swinging casted spout (table mounted) jaquar make continental (Cat.No. CON- 359) 548 C.p.shower arm 190mm long light body with wallflange jaquar make continental (Cat. No. SHA - 477) 549 C.P.Flush cock with wall flange 25mm with plain knob jaquar make continental (Cat.No. FLR 6081) 550 C.P.Towel rail 24 jaquar make continental (Cat. No. ACN 1111N ) 551 C.P.Towel ring square jaquar make continental (Cat. No. ACN 1121N ) 552 C.P.Soap dish hooker jaquar make continental (Cat. No. AKB 35731 ) 553 C.P.soap dish (polyurethane)jaquar make continental (Cat. No. AQN 7733 ) 554 C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751) 555 C.P.Toilet rack 24with lower hanger jaquar make continental (Cat. No. ACN 1181N) 556 C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563) 557 C.P.Pillar cock jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7011 ) 558 C.P.Bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT7037 ) 559 C.P.2-way bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7041) 560 C.P.Angular stop cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7053) 561 C.P.central hole basin mixer with regular spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7167bB ) 562 C.P.central hole basin mixer with regular spout with popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7169b ) 563 C.P.central hole basin mixer with small spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7171B) 564 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only but without crutchjaquar make queens collection(quarter turn filling) (Cat. No. QQT 7217 ) 565 C.P.wall mixer non-telephonic shower system jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7219 ) 566 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only and with telephone shower crutch jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7267) 567 Hydraulic door closer 568 cPVC pipe 15mm dia. 569 cPVC pipe 20mm dia. 570 cPVC pipe 25mm dia. 571 cPVC pipe 32mm dia. 572 cPVC pipe 40mm dia. 573 cPVC pipe 50mm dia. 574 cPVC Coupling for 15mm dia. 575 cPVC Coupling for 20mm dia. 576 cPVC Coupling for 25mm dia. 577 cPVC Coupling for 32mm dia. 578 cPVC Coupling for 40mm dia. 579 cPVC Coupling for 50mm dia. 580 Elbow 90 Degree for 15mm dia. 581 Elbow 90 Degree for 20mm dia. 582 Elbow 90 Degree for 25mm dia. 583 Elbow 90 Degree for 32mm dia. 584 Elbow 90 Degree for 40mm dia. 585 Elbow 90 Degree for 50mm dia. 586 Tee for 15mm dia. 587 Tee for 20mm dia. 588 Tee for 25mm dia. 589 Tee for 32mm dia. 590 Tee for 40mm dia. 591 Tee for 50mm dia. 592 End cap for 15mm dia. 593 End cap for 20mm dia. 594 End cap for 25mm dia. 595 End cap for 32mm dia. 596 End cap for 40mm dia. 597 End cap for 50mm dia. 598 Ball cock for 15mm dia. 599 Ball cock for 12mm dia. 600 Ball cock for 25mm dia. 601 Ball cock for 32mm dia. 602 Ball cock for 40mm dia. 603 Araldite adhesive 604 Ball valves for 50mm dia. 605 Male adapter (Brass Threads) for 15mm dia. 606 Male adapter (Brass Threads) for 20mm dia. 607 Male adapter (Brass Threads) for 25mm dia. 608 Male adapter (Brass Threads) for 32mm dia. 609 Male adapter (Brass Threads) for 40mm dia. 610 Male adapter (Brass Threads) for 50mm dia. 611 Male adapter (Plastic Threads) for 15mm dia. 612 Male adapter (Plastic Threads) for 20mm dia. 613 Male adapter (Plastic Threads) for 25mm dia. 614 Male adapter (Plastic Threads) for 32mm dia. 615 Male adapter (Plastic Threads) for 40mm dia. 616 Male adapter (Plastic Threads) for 50mm dia. 617 Female adapter (Brass Threads) for 15mm dia. 618 Female adapter (Brass Threads) for 20mm dia. 619 Female adapter (Brass Threads) for 25mm dia. 620 Female adapter (Brass Threads) for 32mm dia. 621 Female adapter (Brass Threads) for 40mm dia. 622 Female adapter (Brass Threads) for 50mm dia. 623 Female adapter (Plastic Threads) for 15mm dia. 624 Female adapter (Plastic Threads) for 20mm dia. 625 Female adapter (Plastic Threads) for 25mm dia. 626 Union for 15mm dia. 627 Union for 20mm dia. 628 Union for 25mm dia. 629 Union for 32mm dia. 630 Union for 40mm dia. 631 Union for 50mm dia. 632 Cross for 15mm dia. 633 Cross for 20mm dia. 634 Step over Bend 15mm dia. 635 Step over Bend 20mm dia. 636 Tee holder for 15mm dia. 637 Tee holder for 32mm dia. 638 End plug threaded for 15mm dia. 639 R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg 640 R.C.C.Chamber cover with frame 90cm*45cm Medium Duty 140kg 641 R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg 642 R.C.C.Chamber cover with frame 60cm*45cm Medium Duty 100kg 643 I.S.I.Ferrul Connection15mm dia. 644 I.S.I.Ferrul Connection 20mm dia. 645 I.S.I.Ferrul Connection 25mm dia. 646 I.S.I.Ferrul Connection 32mm dia. 647 I.S.I.Ferrul Connection 40mm dia. 648 I.S.I.Ferrul Connection 50mm dia. 649 Water meter 15 mm diameter 650 Water meter 20 mm diameter 651 Water meter 25 mm diameter 652 Water meter 40 mm diameter 653 Water meter 50 mm diameter 654 Water meter 80 mm diameter 655 Water meter 100 mm diameter 656 Non return Valve 40 mm diameter 657 Non return Valve 50 mm diameter 658 Non return Valve 80 mm diameter 659 Non return Valve 100 mm diameter 660 Colour Wash Hand Basin 0.45 x 0.30 661 White Glaze Earth Sink 0.6 x 0.2 x 0.45 662 Clamp for G.I.pipe 200mm 663 Earopean type glazed W.C.pan 68cm 664 Earopean white glazed earthen ware closet pan 665 P.V.C. Nahni Trap 666 P.V.C. Connector. 15 mm dia 667 Low level flushing cistern 668 Upvc sanitary pipes all 20 mm dia. 669 Upvc sanitary pipes all 75 mm dia. 670 Bib cock stop tap brass heavy 15mm 671 Stainless Steel sink of size 610 x 460 x 200 mm of nirali or equivalent make 672 Upvc sanitary pipes all 63 mm dia. 673 W.C.PAN Colour glazed 57.50 CM (Orissa) 674 Piller cock mixer & Angle cock 675 Upvc sanitary pipes all 25 mm dia. 676 Upvc sanitary pipes all 15 mm dia. 677 Cement 678 Upvc sanitary pipes all 40 mm dia. 679 Upvc sanitary pipes all 50 mm dia. 680 Stainless Steel sink of size 470 x 420 x 178 mm of nirali or equivalent make 681 Bib cock Long Arm 682 Bottletrap wash basin 32 mm Cromium Plated 683 Upvc sanitary pipes all 32 mm dia. 684 Hamp rope 685 Bib cock cock stop tap brass heavy 15 mm 686 Colour wash hand basin 45*30cm 687 Ultra 250 mm. dia. uPVC 90 degree junction chamber base with U trap 688 Ultra 250 mm.dia. uPVCCover & Frame 689 uPVC Blanking Plug 110 mm 690 uPVC 90 degree bend 691 Ultra Shaft 250x470mm 692 Water jet with accessories 693 White glazed full stall urinal 694 Glass plain 6mm thick 695 White Glazed Earthenware Squatting plate (Ladies Urinal) 696 Autoclosing pillar cock of pressmatic tap 697 PVC Aqua kraft type super bib tap 15 mm 698 PVC Aqua kraft type super Two Way bib tap 15 mm 699 Super push button type cock / tap with flange 15 mm 700 PVC Aqua kraft type super jet spray 15 mm 701 PVC Aqua kraft type super right angle stop tap 702 PVC Aqua kraft type super Pillar tap 15 mm 703 Fixing in CC BK Clamp, Battan 704 Wall Mounted European type glazed W.C.pan 705 Super wall sink type tap with flange 15 mm 706 Two Way bib tap with flange 707 super jet spray with flange 2 in 1 faucet 1.50 metre long 708 Chloryphyriphos 709 Solvent 710 D.D.V.P. 711 Malathion 712 Pine Oil 713 S.S. Pipe 40 mm dia 714 Mild Steel 715 Barbed Wire 716 Concentina Coil Wire 717 M.S.Steel 718 RCC Pole 719 Green marble 720 Telephone black granite 721 Karva (for roof and sides 10kg bundle) 722 Tatti 723 Bamboo 25mm dia. 724 Lightening Conductor 725 Salt 726 Copper Tape width 25mm*3mm thick 727 Aluminium Strips 50 mm x 3 mm 728 Cripped wire3 - 0 , 4 - 0 and 5 - 0 wide 729 Welding Electrodes 730 Welded Mesh 75 X 75 mm 731 Welded Mesh 150 X 150 mm 732 Tarat 36 width (Gunny cloth) 733 Chain link3 - 0 , 4 - 0 and 5 - 0 wide 734 Bamboo 50mm dia. 735 Hold Fast for Steel Gate 736 Nut Boldts 12 mm dia. /Nails all size 737 M.S. Pipe 40 mm dia 738 Welding Rod 739 PVC hand rail cover 740 Antitermite Liquid 741 Lock for Drawer/Cupboard 742 Glycel 743 Hing 744 Hot lime 745 Ladder 746 Fine tooth chisel 747 Saw 748 Gloves 749 R.C.C.Pipe 1200mm dia.(Np3)2.5m long 750 R.C.C.Pipe 1100mm dia.(Np3)2.5m long 751 R.C.C.Pipe 1000mm dia.(Np3)2.5m long 752 R.C.C.Pipe 900mm dia.(Np3)2.5m long 753 R.C.C.Pipe 800mm dia.(Np3)2.5m long 754 R.C.C.Pipe 700mm dia.(Np3)2.5m long 755 R.C.C.Pipe 600mm dia.(Np3)2.5m long 756 R.C.C.Pipe 500mm dia.(Np3)2.5m long 757 R.C.C.Pipe 450mm dia.(Np3)2.5m long 758 R.C.C.pipe Np2 class 1000mm dia. 2.5m long 759 R.C.C.Np2 Pipe Collar 1000 mm Dia. 760 R.C.C.pipe Np2 class 1200mm dia. 2.5m long 761 R.C.C.Np2 Pipe Collar 1200 mm Dia. 762 R.C.C.pipe Np2 class 1800mm dia. 2.5m long 763 R.C.C.pipe Np2 class 900mm dia. 2.5m long 764 R.C.C.Np2 Pipe Collar 900 mm Dia. 765 R.C.C.pipe Np2 class 800mm dia. 2.5m long 766 R.C.C.Np2 Pipe Collar 800 mm Dia. 767 R.C.C.pipe Np2 class 700mm dia. 2.5m long 768 R.C.C.pipe Np2 class 600mm dia. 2.5m long 769 R.C.C.Np2 Pipe Collar 600 mm Dia. 770 R.C.C.pipe Np2 class 500mm dia. 2.5m long 771 R.C.C.pipe Np2 class 450mm dia. 2.5m long 772 R.C.C.Np2 Pipe Collar 450 mm Dia. 773 R.C.C.pipe Np2 class 100mm dia. 2m long 774 R.C.C.pipe Np2 class 150mm dia. 2m long 775 R.C.C.pipe Np2 class 225mm dia. 2m long 776 R.C.C.pipe Np2 class 300mm dia. 2m long 777 RCC Pipe Np 4 heavy duty non presure pipe 1000 mm diameter 778 RCC Pipe Np4 heavy duty non presure pipe 1200 mm diameter 779 RCC Pipe Np4 heavy duty non presure pipe 900 mm diameter 780 Cement 781 Structural Steel 782 TMT FE - 500 783 HCRM/CRS Reinforcement 784 Bitumen VG 10 (Bulk) (80/100) 785 Bitumen VG 30 (Bulk) (60/70) 786 Bitumen VG 40 (Bulk) (30/40) 787 Bitumen VG 30 (Packed) (60/70) 788 Bitumen VG 40 (Packed) (30/40) 789 Bitumen VG 10 (Packed) (80/100) 790 Sand - Natural/V.S.I.(Vertical Shaft Impact Crusher)Quality Artifitial Sand 791 Sand - Crushed 792 Natural Sand - Screened (for plaster work only) 793 Bricks II Class 794 Rubble stone excluding royalty 795 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 796 Aggregate 25 mm 797 Aggregate 20 mm 798 Aggregate 12 mm 799 Aggregate 10 mm 800 Aggregate 6 mm 801 Stone Dust 802 Soft Murum 803 Hard Murum 804 Water 805 White Cement 806 Plasticizer 807 Stainless Steel Plate 808 EMULSION RS1 ( Hincol) BULK 809 EMULSION RS1 ( Hincol) Packed 810 WASTE PLASTIC to be used in bituminous treatment as per IRC SP-098-2013 811 Portland Slag Cement (PSC) 812 Ground Granulated Blast Furnance Slag (GGBS) 813 Bitumen VG-40 (bulk (30-40 grade)) 814 Stone Boulder of size 150 mm and below at Cruser Plant 815 Supply of quarried stone 150 - 200 mm size for Hand Broken at site 816 Boulder with minimum size of 300 mm for Pitching at Site 817 Coarse sand at Mixing Plant 818 Coarse sand at Site 819 Murum at Site 820 Fly ash conforming to IS: 3812 ( Part II &I) atHMP Plant / Batching Plant / Crushing Plant 821 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) 822 Close graded Granular sub-base Material 53 mm to 9.5 mm 823 Close graded Granular sub-base Material37.5 mm to 9.5 mm 824 Close graded Granular sub-base Material26.5 mm to 9.5 mm 825 Close graded Granular sub-base Material9.5 mm to 4.75 mm 826 Close graded Granular sub-base Material9.5 mm to 2.36 mm 827 Close graded Granular sub-base Material 4.75mm to 2.36 mm 828 Close graded Granular sub-base Material 4.75mm to 75 micron mm 829 Close graded Granular sub-base Material2.36 mm 830 Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. 831 Coarse graded Granular sub-base Material2.36 mm & below 832 Coarse graded Granular sub-base Material4.75mm to 75 micron mm 833 Coarse graded Granular sub-base Material4.75 mm to 2.36 mm 834 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 835 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 836 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 837 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 838 Coarse graded Granular sub-base Material 53 mm to 26 .5mm 839 Aggregates below 5.6 mm 840 Aggregates 22.4 mm to 2.36 mm 841 Aggregates 22.4 mm to 5.6 mm 842 Aggregates 45 mm to 2.8 mm 843 Aggregates 45 mm to 22.4 mm 844 Aggregates 53 mm to 2.8 mm 845 Aggregates 53 mm to 22.4 mm 846 Aggregates 63 mm to 2.8 mm 847 Aggregates 63 mm to 45 mm 848 Aggregates 90 mm to 45 mm 849 Aggregates 10 mm to 5 mm 850 Aggregates 11.2 mm to 0.09 mm 851 Aggregates 13.2 mm to 0.09 mm 852 Aggregates 13.2 mm to 5.6 mm 853 Aggregates 13.2 mm to 10 mm 854 Aggregates 20 mm to 10 mm 855 Aggregates 25 mm to 10 mm 856 Aggregates 19 mm to 6 mm 857 Aggregates 37.5 mm to 19 mm 858 Aggregates 37.5 mm to 25 mm 859 Aggregates 6 mm nominal size 860 Aggregates 10 mm nominal size 861 Aggregates 13.2/12.5 mm nominal size 862 Aggregates 20 mm nominal size 863 Aggregates 25 mm nominal size 864 Aggregates 40 mm nominal size 865 Binding wire 866 Bitumen ( Cationic Emulsion ) 867 Bitumen VG-30 (bulk (60-70 grade)) 868 Bitumen VG -10 (bulk (80-100 grade )) 869 Bitumen (Cutback ) 870 Bitumen (emulsion) 871 Bitumen (modified graded) (bulk Cr-60) 872 Geo grids 873 Geomembrane 874 Geonets 875 Geotextile 876 Geotextile filter fabric 877 LDO 878 Pavement Marking Paint 879 RCC Pipes 200 mm dia, 2.5 m long for drainage 880 Quarry spall 881 Road Barricade Perforated fench(2000 x 1000 x 40 mm ) 882 Road Barricade Sand Fillable only 1 mtr.[1000(L) x 350(W) x 760(H) mm ] 883 Polypropylene multifilament woven geotextile fabric for filter layer (approved opening size 0.075mm & water permeability 9.00 Litres/Sqm/Second) 884 Polythene bags 885 Trap stones weighing upto 20 kilogram 886 Trap stones weighing from 20 to 50 kilogram 887 Trap stones weighing from 50 to 100 kilogram 888 Trap stones weighing from 100 to 200 kilogram 889 Trap stones weighing from 200 to 300 kilogram 890 Trap stones weighing from 300 to 500 kilogram 891 Trap stones weighing from 500 to 1000 kilogram 892 Trap stones weighing from 1000 kilogram and above 893 Laterite stones rubbles upto 20kilogram 894 Laterite stones rubbles from 20 to 50 kilogram 895 Laterite stones rubbles from 50 to 100 kilogram 896 Gabions boxes of mechanically woven hexagonal shaped wire mesh of type, 10 cm x 12 cm. edges mechanically selvedged (Zinc+ PVC) coated G.I. wires as per BS: 443, mesh wire dia. 3.00 mm, edge wire 3.70 mm size 897 a) Gabion size - 1.00 x 1.00 x 1.00 M 898 b) Gabion size - 1.50 x 1.00 x 1.00 M 899 c) Gabion size - 2.00 x 1.00 x 1.00 M 900 d) Gabion size - 3.00 x 1.00 x 1.00 M 901 e) Gabion size - 4.00 x 1.00 x 1.00 M 902 Flexible gabions of polypropylene material of 10 mm ø four strand mesh size of 150mm x 150 mm size 903 a) Gabion size - 1.00 x 1.00 x 1.00 M 904 b) Gabion size - 1.50 x 1.00 x 1.00 M 905 c) Gabion size - 2.00 x 1.00 x 1.00 M 906 d) Gabion size - 3.00 x 1.00 x 1.00 M 907 Used tyre fender 908 Geotextile bags of sizes 909 a) Geotextile bags size - 1.00 x 0.70 M 910 b) Geotextile bags size - 2.00 x 1.50 M 911 Geotextile tube of 20 metre long & 912 a) Geotextile tube diameter - 3.00 M 913 b) Geotextile tube diameter - 1.50 M
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
Maharashtra View Result →
32.
Public Administrative Department #10362440 Price Bid
Tender For Construction Of Public Drinking Water Facility At Dholera Noorsar Fanta Of Gram Panchayat Kalasar - Earth work in foundation excavation up to 1.5m, ramming bottom, dressing sides, back filling and disposal of surplus soil with in a lead of 50m. In hard soil. 2 Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:5:10 mix 3 Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6 4 Brick work in super structure using bricks of class designation-75 in CM 1:6 5 S & F Stone lintels 6 P & L First class stone slab roof in CM 1:4 7 P & L brick bats on roof in CM 1:4 8 S & F Glaze tiles on roof 9 20mm thick plaster on new work including curing and racking of joints in CM 1:6 10 Colour washing with lime 11 White washing with lime 12 S & F Iron door 13 Fixing of Iron door 14 Enamel painting on door 15 Cement concrete in floor with stone ballast size 40mm including curing and compaction etc in 1:6:12 mix 16 S & F Glaze tiles in floor 17 P & L Polished kota stone floor 18 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. (PWD BSR-2022 Less-10%) Jhunjhunu / Jalore (Red / Choclate Colour) Up to 1501 Cm2 19 Wiring for fan/light point in PVC condut pipe as per specification 20 Wiring for circuit/submain as per specification- 2x1.5Sqmm 21 S & F Water cooler 22 S & F Electric motor pump 23 S & F PVC water storage tank 24 S & F Bib cock 25 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) ( PWD BSR -2022. Less-10%) 20mm nominal size 26 S & F Full way valve-20mm 27 Yojna board & Contingency charges
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
33.
Rural Development #10355943 Price Bid
Providing and Supplying various different material and machinery at Grampanchayat Shivapur Tal Haveli Dist Pune- 2 Centering Oil 3 Plastic Cover Block 4 R.C.C.Jali 50mm thick 5 M-10 6 M-20 7 M-15 8 M-30 9 Plastizer (Rheobuild) 825 RMt. 10 Concrete Spacer Block 15 mm 11 Concrete Spacer Block 20 mm 12 Concrete Spacer Block 25 mm 13 Concrete Spacer Block 30 / 40 mm 14 Anticorrrisive Primer Coat 15 Swaling Coat 16 PVC Coated GI Wire 17 Repairs to cut ends and damages with special liquid epoxy 18 Epoxy paint 19 R.C.C.Jali 80mm thick 20 Bricks (Red) 21 AAC Block 600x200x100 mm 22 Jointing Mortar 23 Fly ash Bricks 24 Corner stone 38*20*30cm 25 Khandakies 26 Pin Header (Standard Size) 27 Hollow Blocks C.C.0.2*0.2*0.4M 28 Hollow Blocks C.C.0.1*0.2*0.4M 29 Hollow Block C C 0.30 x 0.20 x 0.15 30 Siporex Block 75x240x650 mm 31 GBP Build Fast plus 32 Siporex Block 100x240x650 mm 33 Siporex Block 200x240x650 mm 34 Bitumen (Compound) 35 Brick bats 36 Water proof compound I.S 37 Tar Felt B.H.I.S.I.3mm thick 38 Acrylic Polymer Modified waterproofing Powder 39 Acrylic Polymer Modified Liquid 40 Fibre Glass Mesh 41 Bitumen 85/25 Grade 42 Bitumen 85/25 Grade Cold Primer 43 Grit (Add Below 5.6) 44 Bitumen Felt 45 Polydee-TP40 Primer 46 Polydee-TP40 Primer 47 Polydee-LM 48 Polydee-LM 150mm width 49 Bituflex Cloesdcell foam 30x30 mm 50 AG 10 Granules 51 Polydee-MC 52 Polydee-41 sealant and polyseal 53 Polydee-11 54 Bitumen Pad 25mm thick 1.20 x 1.20 Mtr 55 Neeru / Sanala 56 White Putty (Cement) 57 Texture Material 58 Rough Shahabad 25 to 30mm thick 59 Rough Shahabad 40 to 45 mm thick 60 Polished Shahabad 25 to 30mm thick 61 Rough Shahabad 50 to 60mm thick 62 Polished Shahabad 40 to 50mm thick For step 63 Polished Shahabad Machine cut 25mm thick 64 Polished Shahabad for step25mm thick 65 Tandoor Polished 25mm thick (Machine cut) 66 Tandoor Polished 25mm thick (Hand Cut) 67 Tandoor Polished for steps25mm thisk 68 Black Kadappa (one side polish) (Machine cut) 25 mm thick 69 Black Kadappa (one side polish) (Machine cut) 35mm thick 70 Both Sides Polished Kadappastone 25mm thick 71 Kota stone (Machine cut) upto 25-30mm thick one side polished 72 Kota stone (Hand cut) upto 25-30mm thick one side polished 73 Kota stone for step polished) upto 25mm thick (1.2*0.3M) 74 Ceramic tiles 30*30cm 75 Ceramic Antiskid Flooring Tiles 30 x 30 cm 76 Ceramic Tiles for dado 30 cm x 30 cm 77 Ceramic Tiles for dado 30 x 45 cm 78 Heavy duty interlocking concrete block 60mm thick gray 300 kg/sq.cm. 79 Heavy duty interlocking concrete block 60mm thick coloured 300kg/sq.cm 80 Heavy duty interlocking concrete block 80mm thick gray 300kg/sq.cm 81 Heavy duty interlocking concrete block 80mm thick coloured 300kg/sq.cm 82 Heavy duty interlocking concrete block 80mm thick rubber mould glossy 400kg/sq.cm 83 Heavy duty interlocking concrete block 40mm thick colour 200 kg/sq.cm 84 Telephone Black Granite 85 Green marble 86 Vitrified tiles Glossy Size 590 to 605 mm* 590 to 605 mm*8 to 10mm 87 Vitrifiedmatt finish - size 590 to 605 mm* 590 to 605 mm *8 to 10mm 88 Vitrified rustic matt stone finish size 590 to 605mm *590 to 605mm*8 to 10mm 89 Vertified stone effect finish size 590 to 605mm* 590 to 605mm * 8 to 10mm 90 Calcet Powder 91 Black Oxide powder 92 Fevi Matt Chemical 10 Kg Bag 93 Marble chips 94 Heavy duty interlocking concrete block 60mm thick rubber mould glossy 400kg/sq.cm 95 Tremix Treatment 100 mm thick 96 Marble mosaic chequered tiles (gray) 97 Colour cement 98 Heavy Duty Designer come. tile for flooring 99 Heavy Duty Designer come. tile for Steps 100 PVC flooring 101 Ceramic Tiles for dado 30 x 60 cm 102 Marble (other than white makrana) 103 Kota stone (Hand cut) upto 45-55mm thick one side polished 104 Vitrifiedmatt finish - size 895 to 900 mm* 895 to 900 mm *10 to 12 mm 105 Bees wax 106 Coal Tar 107 Common Spirit 108 French Polish 109 Varnish 110 Malemaine Polish 111 C.C.T.W. Ballies 125 mm Diameter 112 Oil enamel paint/flat/glossy paint(ready mix) (with I.S.I. Mark) 113 Synthetic paint (ready mix) 114 Catonic emulsion paint 115 White oil paint 100ml pack tin 116 Red Oxide paint 117 Cement paint 118 Steel Primer 119 Primer for plaster surface 120 Putty 121 Boiled linseed oil 122 Linseed oil double boiled 123 Terpentine 124 Wood Primer 125 Brush for lettring 126 Brush for road marking 5cm 127 Brush for marking road 8cm 128 Brush for road marking 10cm 129 Lustre paint 130 Textured Synthetic paint 131 White lead paint 132 Birla wall care putty 133 Aluminium Paint 134 Plastic emulsion paint 135 Acraylic Emulsion Paint 136 Exterior Primer 137 Weather shield paint 138 Neel 139 Oil bound distemper 140 Red powder / Geru 141 Saras 142 Scrapping sand paper size (30 * 20cm) 143 Dry distemper 144 Chunam / White lime Powder 145 paint Luster Paint 146 Roller Brush 147 Royale Luxury Emulsion Paint 148 Country Teak Wood 149 Ghana teak wood 150 Teak Wood planks above 2.5 m length 151 Teak wood bidding 1/2 * 1/2 152 T.W.Balli 100 mm dia 153 Jungle wood (non teak) normal 154 Bamboo 25mm dia.(4.5 to 6m) 155 Bamboo 50mm dia. 156 Bamboo Matting 1.2*1.8m 157 Ply wood 12mm thick 158 Ply wood 6mm thick 159 Mica laminate as per ISI 0.1 mm thick 160 Face Veneel board 4 mm thick 161 Particle board B.W.P.Phinol bond 12mm thick 162 Particle board B.W.P.Phinol bond 19 mm thick 163 Formica 1.5 mm thick 164 Tower bolt brass oxidised 10 mm dia length 150 mm 165 Ferical 166 Ply wood 18mm thick Commercial 167 Teak wood battens 50 * 25mm 168 Teak wood batten 25 mm * 12 mm 169 Veneer 3.5 to 4 mm thick 170 Alluminium rod 25mm dia 171 A.C.Corrugated sheet 6mm thick 172 A.C.Sheet ridge 173 A.C.Sheet plain 4mm thick 174 G.C.I. Sheet (Corrugated) 22 BWG 175 G.C.I. Sheet (Corrugated) 24 BWG 176 G.I. Sheet (plain) 22 BWG 177 G.I. Sheet (plain) 24 BWG 178 G.I.Washers 179 G.I. J or L hooks 6 mm dia. 180 Nails iron all size 181 Mangalore tiles class AA 182 Mangalore Ridge / Hip tiles 183 Mangalore Glass tiles 184 Mangalore Pattern cowl Ventilator 185 G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured Sheet 186 G.I. Pre coated Ridge Sheet 187 Gypsum powder 188 Aluminium Alloy plate 2mm thick 189 Aluminium sheeting fixed with encapsuled lens type reflective sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable. 190 Plaster Of Paris 191 Decorative Board of Fibrous Plaster of Paris 12 to 15 mm 192 Acoustic Board 12 mm thick 193 Gypsum Board 12.5 mm thick 194 UPVC 3 layer trapezoidal 2.00 mm sheet 195 Light weight calcium silicate tile of size 595 x 595 mm of texture spin stone / cosmos / plain / Glode fine fissured. 196 Bioguard Board 16 mm 197 Ultima tile 198 Optra tile 199 Proflex Sheet 1 mm 200 Sky light 2 mm thick 201 Hanger rod 4mm thick 202 level Adjustment clip size 85x30x0.8mm 203 Dash fastener 12.5mm dia 50mm long 204 Soffit cleat 25mmx35mmx1.60mm 205 Wooden Screws with plastic rawl plugs 35mmx8mm 206 Light weight calcium silicate tiles of size 595x595mm of texture Spintone for Tegular edge ceiling 207 Plain Zinc Sheet 208 UPVC ridge/hip tiles 209 Hanger wire (2.68 mm dia), 1.82 m long 210 Dune edge tiles 211 Fine fissured edge tiles 212 Turbo ventilator 24 213 Tarat 36 width ( Gunny Cloth) 214 Wire glass 215 Fire wood 216 Precoated Galvanised Steel Plain Sheet 217 Connecting clip for supports 218 Dry wall screws 25 mm 219 Jointing Compound 220 Jointing Tape 221 Minaral Fibre board 600 x 600 mm 222 Perimeter Channel 80 x 8 mm 223 Screws 1 12 224 Screws 1/2 225 Rawal Plug 226 Plain Zinc Sheet 0.50 mm thick 227 Aldrop 300*16mm Chromium Plated 228 Aldrop Iron Oxidise 300*16mm 229 Aldrop Stainless steel 300*16mm 230 Handle 125mm M.S. Chromium Plated 231 Handle 150mm Brass Chromium plated (Rounded Shape) 232 Handle Alluminium 125 mm 233 Iron hinges chromium plated 125mm 234 But Hinges Alluminium 125mm 235 G.I.Screw 50mm 236 G.I.Screw 25mm 237 Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty) 238 Tower bolt Aluminium 10mm dia.length 250mm 239 Tower bolt Aluminium 10mm dia.length 200mm 240 Tower bolt M.S. Chromium plated 10mm dia,length 300mm 241 Tower bolt M.S. Chromium plated 10mm dia,length 200mm 242 Cold Rolled Steel Hollow Section Door frame 1829*610mm 243 Aluminium stay 25cm 244 Aluminium stay 30cm 245 Jali fly proof 246 Jali chicken mesh 247 Jali welded mesh 25*25* 13 Guage 248 Jali welded mesh 25*25* 11 Guage 249 Jali welded mesh 50*25 13 Guage 250 Jali welded mesh 50*25 11 Guage 251 Hold fast Iron 300*40*5mm 252 Sliding Door Bolt Stainless Steel 12mm dia. 250mm length 253 Glass plain 3mm 254 Glass plain 5mm 255 Glass obscured (bajara) 5mm 256 G.I. Nut Bolt 257 Housing box to rolling shutter 258 Mechanical Gear For Rolling Shutter 259 Mortice lock superior 260 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side 261 Iron washer 12mm to 16mm 262 Aluminium Section 263 Nylon / PVC Gasket 264 Alluminium Screw 32 x 6 mm, 25 x 6 mm 265 Concealed locking arrangement of 100 mm length for sliding window 266 Alluminium Grill 7.50 mm thick 267 Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark 268 Iron Oxidized sliding door bolt 200 mm length, 12 mm dia 269 Powder and Chemicals for colour anodizing process of alluminium sections 270 Lock for Sliding Shutter 271 All Bearing Roller 272 All Frame Rail Angle 273 Welding Electrodes 274 C.R.C. Sheet 275 Abstrone Butadyne Styrine (ABS) Door Shutter including Transportation 276 Puff Insulation 35-40 Kg/Cumt. Density 277 PVC Door Shutter 34 mm thick Factory Made Shutter 278 FRP Door Shutter 30 mm thick Factory Made Shutter 279 FRP Door Shutter 35 mm thick Factory Made Shutter 280 Bison Pannel 281 PVC factory made solid panel door shutter with stainless steel fixutres & fastening 282 PVC factory made flush door 30 mm with stainless steel fixutres & fastening 283 Sliding door bolt Chromium plated 250mm 284 Acrylic Plain Sheet 3 mm 285 Aldrop Stainless steel 300*16mm 286 Aldrop Stainless steel 250*16 mm 287 Handle 150mm Stainless Steel (Rounded Shape) 288 Handle 200mm Stainless Steel (Rounded Shape) 289 Stainless Steel Hinges - 100mm 14 gauge (Heavy Duty) 290 Stainless Steel Hinges - 125mm 14 gauge(Heavy Duty) 291 Housing box to rolling shutter 292 Mechanical Gear For Rolling Shutter 293 Door StopperStainless Steel 294 Tower Bolt Stainless Steel 200 mm 295 Tower Bolt Stainless Steel 250 mm 296 Sliding Door Bolt Stainless Steel 250 mm 297 Handle Stainless Steel 100 mm 298 Eye Hole Lens 299 Rolling Shutter 300 Ply Wood 301 Stainless steel hooks and eyes 200 mm 302 Steel Window 303 Powder Coating 304 Rubber Lining 305 Ply wood 9 mm thick 306 Laminated board double 12mm thick 307 Alluminium Section anodized 308 Handle iron oxidised 150 mm 309 Hinges iron oxidised 100 mm 310 T. W. Particle board, both face laminated 12 mm 311 Battens T.W. 70 x 45 mm 312 Nuts and Bolts 313 Plain FRP Sheet 22 B.W.G. 314 TW Runner (6 x 3) 315 Alluminium Screw 316 F Patti 317 Teak wood planks above 2.5m length 318 Vision Panel 319 Solid core shutter 35 mm thick with commercial veneer facing and phenol bonded 320 Oil Paint 321 Acrylic Plain Sheet 2 mm thick 322 Aluminium Sheet 24 B.W.G 323 Alluminium Section with Powder Coating 324 Concealed lock 325 Mosquito proof Nylone net 326 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side with bidding patty 327 G.I. Pipe 100mm dia. Medium type 328 G.I. Pipe 100mm dia. Heavy type 329 G.I. Pipe 15mm dia. Medium type 330 G.I. Pipe 15mm dia. Heavy type 331 G.I. Pipe 20mm dia. Medium type 332 G.I. Pipe 20mm dia.Heavy type 333 G.I. Pipe 25mm dia. Medium type 334 G.I. Pipe 25mm dia. Heavy type 335 G.I. Pipe 32mm dia. Medium type 336 G.I. Pipe 32mm dia.Heavy type 337 G.I. Pipe 40mm dia. Medium type 338 G.I. Pipe 40mm dia. Heavy type 339 G.I. Pipe 50mm dia. Medium type 340 G.I. Pipe 50mm dia. Heavy type 341 G.I. Pipe 65mm dia. Medium type 342 G.I. Pipe 65mm dia. Heavy type 343 G.I. Pipe 80mm dia. Medium type 344 G.I. Pipe 80mm dia. Heavy type 345 PVC Nahani Trap 75 mm 346 G.I.Clamps 100mm to 150mm 347 PVC Nahani Trap 150 mm 348 G.I.Clamps 12mm to 32mm 349 G.I.Clamps 40mm to 80mm 350 Anglo Indian W.C. Pan Colour 351 G.I.Fixtures 352 P.V.C. Cowl 100 mm 353 G.I.Screws 30mm 354 G.I.Screws 40mm 355 G.I.Union 25mm dia. 356 Gully trap cover with frame 357 Gun Metal stop tap with crutch wheel 20mm 358 Gun metal stop tap with crutch wheel 25mm 359 Gun metal stop tap with crutch wheel 15mm 360 Gun metal stop tap with crutch wheel 20mm 361 C.I.Bend 75mm dia. 362 C.I.Bend 100mm dia. 363 C.I.Bip tap 12mm 364 C.I.Grating 150mm dia. 365 C.I.Grating 100mm dia. 366 C.I.Grating 75mm dia. 367 C.I.Brackets 368 C.I.Collers 100mm dia. 369 C.I.Copllers 75mm dia. 370 C.I.Cover 45*30 cm with frame 371 C.I.Cowl / Vent 100mm dia. 372 C.I.Cowl / Vent 150mm dia. 373 C.I.Cowl / Vent 75mm dia. 374 C.I.Hinged Cover with frame 375 C.I.Man hole cover 50 kg. 376 C.I.Man hole cover 75 kg. 377 C.I.Man hole cover 100 kg. 378 C.I.Man hole cover 175 kg.Heavy (0.9*0.45m) 379 C.I.Nahani trap 100mm dia.(375mm long) 380 C.I.Nahani trap 75 to 80mm dia.(375mm long) 381 C.I.100*75*300 long arm (wt. 6kg)nahani trap 382 C.I.Soil pipe 100mm dia. 383 C.I.Soil pipe 150mm dia. 384 C.I,Soil pipe 75 to 80mm dia. 385 C.I.Shoe 75 mm dia. 386 C.I. Shoe 100 mm dia. 387 C.I.Shoe 150mm 388 Ball cock 15mm dia.P.V.C.FLOAT 389 Ball cock 25mm dia.P.V.C.FLOAT 390 Ball cock 40mm dia.P.V.C.FLOAT 391 Ball cock 50mm dia.P.V.C.FLOAT 392 Bib cock stop tap brass heavy 15mm 393 Bib cock stop tap brass heavy 20mm 394 Bib cockstop tap brass heavy 25mm 395 Bib tap 12mm brass medium 396 Colour wash hand basin 55*40cm 397 Colour wash hand basin 63*45cm 398 White glazed wash basin 45*30cm 399 White glazed wash hand basin 55*50cm 400 P.V.C. flexible Waste Pipe 32 mm dia 401 White Glazed Wash Hand Basin 63 x 45 cm 402 Sink white glazed 45*20*30cm 403 Pedestal for wash basin (standard size) 404 C.C.Septic tank 0.9m dia.(2.5m long) 405 C.C.Septic tank 1.20m dia.(2.5m long) 406 C.I.Steps for manhole 407 C.I.Cover with frame (Gully trap) 408 C.I.Plug Bend 150MM dia. 409 Clamp for G.I.pipe 25mm 410 Colour European type W.C.Pan 411 European type glazed W.C.pan 412 W.C.PAN Coloured glazed 64CM.(Orissa) 413 W.C.PAN White glazed 58 CM.Indian 414 W.C.PAN White glazed 57.50 CM (Orissa) 415 Fibre flushing tank for W.C. 416 Flushing tank automatic Urinal 10ltr. C.I. 417 Flushing tank automatic Urinal 5ltr. (P.V.C.) 418 Low level flush pr. St. 10ltr. 419 Flat back Urinal 420 Stall Type Urinal 421 Lipped type Urinal 422 Coloured glazed full stall Urinal 423 Bleaching Powder 424 Potassium Permanganate 425 Nylon Brush 426 Duster 427 Plastic Bucket 428 Coir 429 Gunny Cloth 430 Kharata 431 Wheel stop tap brass 15mm 432 Wheel stop tap brass 20mm 433 Wheel stop tap brass 25mm 434 Socket brass for 32mm tap 435 Socket brass for 40mm tap 436 Socket brass for 50mm tap 437 Socket brass for 65mm tap 438 Socket for 100mm tap 439 Socket for 15mm tap 440 Socket for 20mm tap 441 Socket for 25mm tap 442 Socket for 32mm tap 443 Socket for 40mm tap 444 Socket for 50mm tap 445 Socket for 65mm tap 446 Socket for 80mm tap 447 Span Yarn 448 Strainer for 100mm 449 Strainer for 40mm 450 Strainer for 50mm 451 Strainer for 80mm 452 Strainer for 15mm 453 Strainer for 20mm 454 Strainer for 25mm 455 Stone ware pipe 100mm dia. 456 Stone ware pipe 150mm dia. 457 Stone ware pipe 225mm dia. 458 Stone ware glazed pipe half round 100mm dia. 459 Stop tap brass with crunch wheel 15mm dia. 460 Towel rod with clamps 16mm dia. 461 Mirror 40*50cm. With plastic frame 462 Brass T Thimble Socket 32mm dia. 463 Brass wheel stop tap 32mm dia. 464 Brass wheel stop tap 40mm dia. 465 Brass wheel stop tap 50mm dia. 466 Brass wheel stop tap 65mm dia. 467 Brass wheel stop tap 80mm dia. 468 Half turn flush cock 25mm dia. 469 12mm flexible inlet pipe connection 470 Bell mouth cover 100mm dia. 471 Box chamber with lock 0.6*0.45m 472 Brass nozzle pillar tap 12mm 473 Black bakelite seat to european closer 474 Concussion push button type gun metal tap 15 to 25mm dia. 475 Coupling cast Iron 100mm dia. 476 Coupling cast Iron 80mm dia. 477 Chromium plated 12mm dia.bib cock 478 C.I.Trap grating 15*10 cm 479 C.I.Y junction 100mm dia. 480 C.I.Y junction 150mm dia. 481 C.I.Y junction 75mm dia. 482 Enameled bend 40mm dia. 483 Ferrul for C.I.pipr 100mm 484 White glazed foot rest chequred 25*10 cm 485 Half round earthware pipe 100mm(60cm long) 486 Half round earthware pipe 150mm(60cm long) 487 Jute Rope 488 Half round chaina ware pipe 100mm(60cm long) 489 Lead pipe 32mm dia. 490 Mohagani seat with lid 491 Mosquito proof coupling 492 Non-return valve 15mm for water meter 493 Non-return valve 25mm for water meter 494 Non-return valve 20mm for water meter 495 Piller tap 12mm dia.chromium plated heavy 496 P.Trap and lead pipe upto 40mm dia. 497 Rubber gasket (25, 28 and 20 cm) 498 Rubber Incertion 499 Rubberised adhesive 500 Salt glazed stone ware gully trap (150*150mm) 501 Self project tap brass chromium plated 15mm 502 Sewer trap 503 Shower rose chromium plated brass 10cm 504 P.V.C. pipe 15mm dia.10kg/cm2 pressure(class IV) 505 P.V.C. pipe 20mm dia.10kg/cm2 pressure(class IV) 506 P.V.C. pipe 25mm dia.10kg/cm2 pressure(class IV) 507 P.V.C. pipe 32mm dia.10kg/cm2 pressure(class IV) 508 P.V.C. pipe 40mm dia.10kg/cm2 pressure(class IV) 509 P.V.C. pipe 50mm dia.10kg/cm2 pressure(class IV) 510 P.V.C. pipe 60mm dia.10kg/cm2 pressure(class IV) 511 P.V.C. pipe 75mm dia.4 kg/cm2 pressure(class II) 512 P.V.C. 75 mm Soil Pipe 6 Kg/cm2 Pressure 513 P.V.C. pipe 90mm dia.4 kg/cm2 pressure(class II) 514 P.V.C.pipe 110mm dia.4kg/cm2 pressure (class II) 515 P.V.C. 110 mm Rain Water Pipe 6Kg/cm2 Pressure 516 P.V.C. 110 mm Soil Pipe 6 Kg/cm2 Pressure 517 P.V.C.pipe 140mm dia.4kg/cm2 pressure (class II) 518 P.V.C.pipe 160mm dia.4kg/cm2 pressure (class II) 519 P.V.C.pipe 160mm dia.Soil Pipe 520 P.V.C.pipe 160mm dia. Rain Water Pipe 521 P.V.C.Socket 15mm dia. 522 P.V.C.Socket 20mm dia. 523 P.V.C.Socket 25mm dia. 524 P.V.C.Socket 32mm dia. 525 P.V.C.Socket 40mm dia. 526 P.V.C.Socket 50mm dia. 527 P.V.C.Socket 60mm dia. 528 P.V.C.Flushing tank (12 ltr. Capacity) 529 Flush valve 32mm dia. 530 Ferocret tank 531 Stainless Steel sink of size 600*510*200mmof nirali or equivalent make 532 C.P.pillar cock jaquar make continental (Cat.No. CON-011) 533 C.P.pillar cock (ISI)jaquar make continental 534 C.P.pillar cock long neck with aerator jaquar make continental (Cat.No. CON- 021) 535 C.P.Bib cock (ISI)jaquar make continental (Cat.No. CON-037) 536 C.P.Bib Cock long thread jaquar make continental (Cat.No. CON-039) 537 C.P.2-way bib cock jaquar make continental (Cat.No. CON-041) 538 C.P.bib cock with wall flange long thread jaquar make continental (Cat.No. CON- 047) 539 C.P.Bib cock with nozzle jaquar make continental (Cat.No. CON-049) 540 C.P.Angular stop cockjaquar make continental (Cat.No. CON-053) 541 C.P.Angular stop cock long thread jaquar make continental(Cat.No. CON-055) 542 C.P.angular stop cock with wall flange jaquar make continental(Cat.No. CON- 059) 543 C.P.central hole basin mixer without popup waste system with 450mm long braided hoses jaquar make continental (Cat.No. CON-167B) 544 C.P.wall mixer with telephone shower arragnementonly but without teltphone shower crutch jaquar make continental (Cat.No. CON-217) 545 C.p.wall mixer non-telephonic shower arrangement jaquar make continental (Cat.No. CON-219) 546 C.P.wall mixer(wall mounted model) with telephone shower arrangement only and with telephone shower crutch jaquar make continental (Cat.No. CON-267) 547 C.P.wall mixer with provision for overheadshower with 115mm long bend pipe and wall flange jaquar make continental (Cat.No. CON-273UPR) 548 C.P.sink mixer with swinging casted spout (wallmounted) jaquar make continental (Cat.No. CON-309) 549 C.P.sink mixer swinging spout (table mounted model) 450mm long braided hoses jaquar make continental (Cat.No. CON-309B) 550 C.P.sink cock with swinging casted spout jaquar make continental (Cat.No. CON- 347) 551 C.P.sink cock with raised J shaped swinging casted spout (table mounted) jaquar make continental (Cat.No. CON- 359) 552 C.p.shower arm 190mm long light body with wallflange jaquar make continental (Cat. No. SHA - 477) 553 C.P.Flush cock with wall flange 25mm with plain knob jaquar make continental (Cat.No. FLR 6081) 554 C.P.Towel rail 24 jaquar make continental (Cat. No. ACN 1111N ) 555 C.P.Towel ring square jaquar make continental (Cat. No. ACN 1121N ) 556 C.P.Soap dish hooker jaquar make continental (Cat. No. AKB 35731 ) 557 C.P.soap dish (polyurethane)jaquar make continental (Cat. No. AQN 7733 ) 558 C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751) 559 C.P.Toilet rack 24with lower hanger jaquar make continental (Cat. No. ACN 1181N) 560 C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563) 561 C.P.Pillar cock jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7011 ) 562 C.P.Bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT7037 ) 563 C.P.2-way bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7041) 564 C.P.Angular stop cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7053) 565 C.P.central hole basin mixer with regular spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7167bB ) 566 C.P.central hole basin mixer with regular spout with popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7169b ) 567 C.P.central hole basin mixer with small spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7171B) 568 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only but without crutchjaquar make queens collection(quarter turn filling) (Cat. No. QQT 7217 ) 569 C.P.wall mixer non-telephonic shower system jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7219 ) 570 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only and with telephone shower crutch jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7267) 571 Hydraulic door closer 572 cPVC pipe 15mm dia. 573 cPVC pipe 20mm dia. 574 cPVC pipe 25mm dia. 575 cPVC pipe 32mm dia. 576 cPVC pipe 40mm dia. 577 cPVC pipe 50mm dia. 578 cPVC Coupling for 15mm dia. 579 cPVC Coupling for 20mm dia. 580 cPVC Coupling for 25mm dia. 581 cPVC Coupling for 32mm dia. 582 cPVC Coupling for 40mm dia. 583 cPVC Coupling for 50mm dia. 584 Elbow 90 Degree for 15mm dia. 585 Elbow 90 Degree for 20mm dia. 586 Elbow 90 Degree for 25mm dia. 587 Elbow 90 Degree for 32mm dia. 588 Elbow 90 Degree for 40mm dia. 589 Elbow 90 Degree for 50mm dia. 590 Tee for 15mm dia. 591 Tee for 20mm dia. 592 Tee for 25mm dia. 593 Tee for 32mm dia. 594 Tee for 40mm dia. 595 Tee for 50mm dia. 596 End cap for 15mm dia. 597 End cap for 20mm dia. 598 End cap for 25mm dia. 599 End cap for 32mm dia. 600 End cap for 40mm dia. 601 End cap for 50mm dia. 602 Ball cock for 15mm dia. 603 Ball cock for 12mm dia. 604 Ball cock for 25mm dia. 605 Ball cock for 32mm dia. 606 Ball cock for 40mm dia. 607 Araldite adhesive 608 Ball valves for 50mm dia. 609 Male adapter (Brass Threads) for 15mm dia. 610 Male adapter (Brass Threads) for 20mm dia. 611 Male adapter (Brass Threads) for 25mm dia. 612 Male adapter (Brass Threads) for 32mm dia. 613 Male adapter (Brass Threads) for 40mm dia. 614 Male adapter (Brass Threads) for 50mm dia. 615 Male adapter (Plastic Threads) for 15mm dia. 616 Male adapter (Plastic Threads) for 20mm dia. 617 Male adapter (Plastic Threads) for 25mm dia. 618 Male adapter (Plastic Threads) for 32mm dia. 619 Male adapter (Plastic Threads) for 40mm dia. 620 Male adapter (Plastic Threads) for 50mm dia. 621 Female adapter (Brass Threads) for 15mm dia. 622 Female adapter (Brass Threads) for 20mm dia. 623 Female adapter (Brass Threads) for 25mm dia. 624 Female adapter (Brass Threads) for 32mm dia. 625 Female adapter (Brass Threads) for 40mm dia. 626 Female adapter (Brass Threads) for 50mm dia. 627 Female adapter (Plastic Threads) for 15mm dia. 628 Female adapter (Plastic Threads) for 20mm dia. 629 Female adapter (Plastic Threads) for 25mm dia. 630 Union for 15mm dia. 631 Union for 20mm dia. 632 Union for 25mm dia. 633 Union for 32mm dia. 634 Union for 40mm dia. 635 Union for 50mm dia. 636 Cross for 15mm dia. 637 Cross for 20mm dia. 638 Step over Bend 15mm dia. 639 Step over Bend 20mm dia. 640 Tee holder for 15mm dia. 641 Tee holder for 32mm dia. 642 End plug threaded for 15mm dia. 643 R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg 644 R.C.C.Chamber cover with frame 90cm*45cm Medium Duty 140kg 645 R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg 646 R.C.C.Chamber cover with frame 60cm*45cm Medium Duty 100kg 647 I.S.I.Ferrul Connection15mm dia. 648 I.S.I.Ferrul Connection 20mm dia. 649 I.S.I.Ferrul Connection 25mm dia. 650 I.S.I.Ferrul Connection 32mm dia. 651 I.S.I.Ferrul Connection 40mm dia. 652 I.S.I.Ferrul Connection 50mm dia. 653 Water meter 15 mm diameter 654 Water meter 20 mm diameter 655 Water meter 25 mm diameter 656 Water meter 40 mm diameter 657 Water meter 50 mm diameter 658 Water meter 80 mm diameter 659 Water meter 100 mm diameter 660 Non return Valve 40 mm diameter 661 Non return Valve 50 mm diameter 662 Non return Valve 80 mm diameter 663 Non return Valve 100 mm diameter 664 Colour Wash Hand Basin 0.45 x 0.30 665 White Glaze Earth Sink 0.6 x 0.2 x 0.45 666 Clamp for G.I.pipe 200mm 667 Earopean type glazed W.C.pan 68cm 668 Earopean white glazed earthen ware closet pan 669 P.V.C. Nahni Trap 670 P.V.C. Connector. 15 mm dia 671 Low level flushing cistern 672 Upvc sanitary pipes all 20 mm dia. 673 Upvc sanitary pipes all 75 mm dia. 674 Bib cock stop tap brass heavy 15mm 675 Stainless Steel sink of size 610 x 460 x 200 mm of nirali or equivalent make 676 Upvc sanitary pipes all 63 mm dia. 677 W.C.PAN Colour glazed 57.50 CM (Orissa) 678 Piller cock mixer & Angle cock 679 Upvc sanitary pipes all 25 mm dia. 680 Upvc sanitary pipes all 15 mm dia. 681 Cement 682 Upvc sanitary pipes all 40 mm dia. 683 Upvc sanitary pipes all 50 mm dia. 684 Stainless Steel sink of size 470 x 420 x 178 mm of nirali or equivalent make 685 Bib cock Long Arm 686 Bottletrap wash basin 32 mm Cromium Plated 687 Upvc sanitary pipes all 32 mm dia. 688 Hamp rope 689 Bib cock cock stop tap brass heavy 15 mm 690 Colour wash hand basin 45*30cm 691 Ultra 250 mm. dia. uPVC 90 degree junction chamber base with U trap 692 Ultra 250 mm.dia. uPVCCover & Frame 693 uPVC Blanking Plug 110 mm 694 uPVC 90 degree bend 695 Ultra Shaft 250x470mm 696 Water jet with accessories 697 White glazed full stall urinal 698 Glass plain 6mm thick 699 White Glazed Earthenware Squatting plate (Ladies Urinal) 700 Autoclosing pillar cock of pressmatic tap 701 PVC Aqua kraft type super bib tap 15 mm 702 PVC Aqua kraft type super Two Way bib tap 15 mm 703 Super push button type cock / tap with flange 15 mm 704 PVC Aqua kraft type super jet spray 15 mm 705 PVC Aqua kraft type super right angle stop tap 706 PVC Aqua kraft type super Pillar tap 15 mm 707 Fixing in CC BK Clamp, Battan 708 Wall Mounted European type glazed W.C.pan 709 Super wall sink type tap with flange 15 mm 710 Two Way bib tap with flange 711 super jet spray with flange 2 in 1 faucet 1.50 metre long 712 Chloryphyriphos 713 Solvent 714 D.D.V.P. 715 Malathion 716 Pine Oil 717 S.S. Pipe 40 mm dia 718 Mild Steel 719 Barbed Wire 720 Concentina Coil Wire 721 M.S.Steel 722 RCC Pole 723 Green marble 724 Telephone black granite 725 Karva (for roof and sides 10kg bundle) 726 Tatti 727 Bamboo 25mm dia. 728 Lightening Conductor 729 Salt 730 Copper Tape width 25mm*3mm thick 731 Aluminium Strips 50 mm x 3 mm 732 Cripped wire3 - 0 , 4 - 0 and 5 - 0 wide 733 Welding Electrodes 734 Welded Mesh 75 X 75 mm 735 Welded Mesh 150 X 150 mm 736 Tarat 36 width (Gunny cloth) 737 Chain link3 - 0 , 4 - 0 and 5 - 0 wide 738 Bamboo 50mm dia. 739 Hold Fast for Steel Gate 740 Nut Boldts 12 mm dia. /Nails all size 741 M.S. Pipe 40 mm dia 742 Welding Rod 743 PVC hand rail cover 744 Antitermite Liquid 745 Lock for Drawer/Cupboard 746 Glycel 747 Hing 748 Hot lime 749 Ladder 750 Fine tooth chisel 751 Saw 752 Gloves 753 R.C.C.Pipe 1200mm dia.(Np3)2.5m long 754 R.C.C.Pipe 1100mm dia.(Np3)2.5m long 755 R.C.C.Pipe 1000mm dia.(Np3)2.5m long 756 R.C.C.Pipe 900mm dia.(Np3)2.5m long 757 R.C.C.Pipe 800mm dia.(Np3)2.5m long 758 R.C.C.Pipe 700mm dia.(Np3)2.5m long 759 R.C.C.Pipe 600mm dia.(Np3)2.5m long 760 R.C.C.Pipe 500mm dia.(Np3)2.5m long 761 R.C.C.Pipe 450mm dia.(Np3)2.5m long 762 R.C.C.pipe Np2 class 1000mm dia. 2.5m long 763 R.C.C.Np2 Pipe Collar 1000 mm Dia. 764 R.C.C.pipe Np2 class 1200mm dia. 2.5m long 765 R.C.C.Np2 Pipe Collar 1200 mm Dia. 766 R.C.C.pipe Np2 class 1800mm dia. 2.5m long 767 R.C.C.pipe Np2 class 900mm dia. 2.5m long 768 R.C.C.Np2 Pipe Collar 900 mm Dia. 769 R.C.C.pipe Np2 class 800mm dia. 2.5m long 770 R.C.C.Np2 Pipe Collar 800 mm Dia. 771 R.C.C.pipe Np2 class 700mm dia. 2.5m long 772 R.C.C.pipe Np2 class 600mm dia. 2.5m long 773 R.C.C.Np2 Pipe Collar 600 mm Dia. 774 R.C.C.pipe Np2 class 500mm dia. 2.5m long 775 R.C.C.pipe Np2 class 450mm dia. 2.5m long 776 R.C.C.Np2 Pipe Collar 450 mm Dia. 777 R.C.C.pipe Np2 class 100mm dia. 2m long 778 R.C.C.pipe Np2 class 150mm dia. 2m long 779 R.C.C.pipe Np2 class 225mm dia. 2m long 780 R.C.C.pipe Np2 class 300mm dia. 2m long 781 RCC Pipe Np 4 heavy duty non presure pipe 1000 mm diameter 782 RCC Pipe Np4 heavy duty non presure pipe 1200 mm diameter 783 RCC Pipe Np4 heavy duty non presure pipe 900 mm diameter 784 Cement 785 Structural Steel 786 TMT FE - 500 787 HCRM/CRS Reinforcement 788 Bitumen VG 10 (Bulk) (80/100) 789 Bitumen VG 30 (Bulk) (60/70) 790 Bitumen VG 40 (Bulk) (30/40) 791 Bitumen VG 30 (Packed) (60/70) 792 Bitumen VG 40 (Packed) (30/40) 793 Bitumen VG 10 (Packed) (80/100) 794 Sand - Natural/V.S.I.(Vertical Shaft Impact Crusher)Quality Artifitial Sand 795 Sand - Crushed 796 Natural Sand - Screened (for plaster work only) 797 Bricks II Class 798 Rubble stone excluding royalty 799 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 800 Aggregate 25 mm 801 Aggregate 20 mm 802 Aggregate 12 mm 803 Aggregate 10 mm 804 Aggregate 6 mm 805 Stone Dust 806 Soft Murum 807 Hard Murum 808 Water 809 White Cement 810 Plasticizer 811 Stainless Steel Plate 812 EMULSION RS1 ( Hincol) BULK 813 EMULSION RS1 ( Hincol) Packed 814 WASTE PLASTIC to be used in bituminous treatment as per IRC SP-098-2013 815 Portland Slag Cement (PSC) 816 Ground Granulated Blast Furnance Slag (GGBS) 817 Bitumen VG-40 (bulk (30-40 grade)) 818 Stone Boulder of size 150 mm and below at Cruser Plant 819 Supply of quarried stone 150 - 200 mm size for Hand Broken at site 820 Boulder with minimum size of 300 mm for Pitching at Site 821 Coarse sand at Mixing Plant 822 Coarse sand at Site 823 Murum at Site 824 Fly ash conforming to IS: 3812 ( Part II &I) atHMP Plant / Batching Plant / Crushing Plant 825 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) 826 Close graded Granular sub-base Material 53 mm to 9.5 mm 827 Close graded Granular sub-base Material37.5 mm to 9.5 mm 828 Close graded Granular sub-base Material26.5 mm to 9.5 mm 829 Close graded Granular sub-base Material9.5 mm to 4.75 mm 830 Close graded Granular sub-base Material9.5 mm to 2.36 mm 831 Close graded Granular sub-base Material 4.75mm to 2.36 mm 832 Close graded Granular sub-base Material 4.75mm to 75 micron mm 833 Close graded Granular sub-base Material2.36 mm 834 Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. 835 Coarse graded Granular sub-base Material2.36 mm & below 836 Coarse graded Granular sub-base Material4.75mm to 75 micron mm 837 Coarse graded Granular sub-base Material4.75 mm to 2.36 mm 838 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 839 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 840 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 841 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 842 Coarse graded Granular sub-base Material 53 mm to 26 .5mm 843 Aggregates below 5.6 mm 844 Aggregates 22.4 mm to 2.36 mm 845 Aggregates 22.4 mm to 5.6 mm 846 Aggregates 45 mm to 2.8 mm 847 Aggregates 45 mm to 22.4 mm 848 Aggregates 53 mm to 2.8 mm 849 Aggregates 53 mm to 22.4 mm 850 Aggregates 63 mm to 2.8 mm 851 Aggregates 63 mm to 45 mm 852 Aggregates 90 mm to 45 mm 853 Aggregates 10 mm to 5 mm 854 Aggregates 11.2 mm to 0.09 mm 855 Aggregates 13.2 mm to 0.09 mm 856 Aggregates 13.2 mm to 5.6 mm 857 Aggregates 13.2 mm to 10 mm 858 Aggregates 20 mm to 10 mm 859 Aggregates 25 mm to 10 mm 860 Aggregates 19 mm to 6 mm 861 Aggregates 37.5 mm to 19 mm 862 Aggregates 37.5 mm to 25 mm 863 Aggregates 6 mm nominal size 864 Aggregates 10 mm nominal size 865 Aggregates 13.2/12.5 mm nominal size 866 Aggregates 20 mm nominal size 867 Aggregates 25 mm nominal size 868 Aggregates 40 mm nominal size 869 Binding wire 870 Bitumen ( Cationic Emulsion ) 871 Bitumen VG-30 (bulk (60-70 grade)) 872 Bitumen VG -10 (bulk (80-100 grade )) 873 Bitumen (Cutback ) 874 Bitumen (emulsion) 875 Bitumen (modified graded) (bulk Cr-60) 876 Geo grids 877 Geomembrane 878 Geonets 879 Geotextile 880 Geotextile filter fabric 881 LDO 882 Pavement Marking Paint 883 RCC Pipes 200 mm dia, 2.5 m long for drainage 884 Quarry spall 885 Road Barricade Perforated fench(2000 x 1000 x 40 mm ) 886 Road Barricade Sand Fillable only 1 mtr.[1000(L) x 350(W) x 760(H) mm ] 887 Polypropylene multifilament woven geotextile fabric for filter layer (approved opening size 0.075mm & water permeability 9.00 Litres/Sqm/Second) 888 Polythene bags 889 Trap stones weighing upto 20 kilogram 890 Trap stones weighing from 20 to 50 kilogram 891 Trap stones weighing from 50 to 100 kilogram 892 Trap stones weighing from 100 to 200 kilogram 893 Trap stones weighing from 200 to 300 kilogram 894 Trap stones weighing from 300 to 500 kilogram 895 Trap stones weighing from 500 to 1000 kilogram 896 Trap stones weighing from 1000 kilogram and above 897 Laterite stones rubbles upto 20kilogram 898 Laterite stones rubbles from 20 to 50 kilogram 899 Laterite stones rubbles from 50 to 100 kilogram 900 Gabions boxes of mechanically woven hexagonal shaped wire mesh of type, 10 cm x 12 cm. edges mechanically selvedged (Zinc+ PVC) coated G.I. wires as per BS: 443, mesh wire dia. 3.00 mm, edge wire 3.70 mm size 901 a) Gabion size - 1.00 x 1.00 x 1.00 M 902 b) Gabion size - 1.50 x 1.00 x 1.00 M 903 c) Gabion size - 2.00 x 1.00 x 1.00 M 904 d) Gabion size - 3.00 x 1.00 x 1.00 M 905 e) Gabion size - 4.00 x 1.00 x 1.00 M 906 Flexible gabions of polypropylene material of 10 mm ø four strand mesh size of 150mm x 150 mm size 907 a) Gabion size - 1.00 x 1.00 x 1.00 M 908 b) Gabion size - 1.50 x 1.00 x 1.00 M 909 c) Gabion size - 2.00 x 1.00 x 1.00 M 910 d) Gabion size - 3.00 x 1.00 x 1.00 M 911 Used tyre fender 912 Geotextile bags of sizes 913 a) Geotextile bags size - 1.00 x 0.70 M 914 b) Geotextile bags size - 2.00 x 1.50 M 915 Geotextile tube of 20 metre long & 916 a) Geotextile tube diameter - 3.00 M 917 b) Geotextile tube diameter - 1.50 M
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
34.
Rural Development #10355110 Price Bid
Mat/Yr Providing Supplying And Erecting Various Different Building And Gutter Material Machinery And Repaire For 1Year At Grampanchayatphulgaon - 1 providing and supplying Material and Machinery 2 Centering Oil 3 Plastic Cover Block 4 R.C.C.Jali 50mm thick 5 M-10 6 M-15 7 M-20 8 M-30 9 Plastizer (Rheobuild) 825 RMt. 10 Concrete Spacer Block 15 mm 11 Concrete Spacer Block 20 mm 12 Concrete Spacer Block 25 mm 13 Concrete Spacer Block 30 / 40 mm 14 Anticorrrisive Primer Coat 15 Swaling Coat 16 PVC Coated GI Wire 17 Repairs to cut ends and damages with special liquid epoxy 18 Epoxy paint 19 R.C.C.Jali 80mm thick 20 Bricks (Red) 21 AAC Block 600x200x100 mm 22 Jointing Mortar 23 Fly ash Bricks 24 Corner stone 38*20*30cm 25 Khandakies 26 Pin Header (Standard Size) 27 Hollow Blocks C.C.0.2*0.2*0.4M 28 Hollow Blocks C.C.0.1*0.2*0.4M 29 Hollow Block C C 0.30 x 0.20 x 0.15 30 Siporex Block 75x240x650 mm 31 GBP Build Fast plus 32 Siporex Block 100x240x650 mm 33 Siporex Block 200x240x650 mm 34 Bitumen (Compound) 35 Brick bats 36 Water proof compound I.S 37 Tar Felt B.H.I.S.I.3mm thick 38 Acrylic Polymer Modified waterproofing Powder 39 Acrylic Polymer Modified Liquid 40 Fibre Glass Mesh 41 Bitumen 85/25 Grade 42 Bitumen 85/25 Grade Cold Primer 43 Grit (Add Below 5.6) 44 Bitumen Felt 45 Polydee-TP40 Primer 46 Polydee-TP40 Primer 47 Polydee-LM 48 Polydee-LM 150mm width 49 Bituflex Cloesdcell foam 30x30 mm 50 AG 10 Granules 51 Polydee-MC 52 Polydee-41 sealant and polyseal 53 Polydee-11 54 Bitumen Pad 25mm thick 1.20 x 1.20 Mtr 55 Neeru / Sanala 56 White Putty (Cement) 57 Texture Material 58 Rough Shahabad 25 to 30mm thick 59 Rough Shahabad 40 to 45 mm thick 60 Polished Shahabad 25 to 30mm thick 61 Rough Shahabad 50 to 60mm thick 62 Polished Shahabad 40 to 50mm thick For step 63 Polished Shahabad Machine cut 25mm thick 64 Polished Shahabad for step25mm thick 65 Tandoor Polished 25mm thick (Machine cut) 66 Tandoor Polished 25mm thick (Hand Cut) 67 Tandoor Polished for steps25mm thisk 68 Black Kadappa (one side polish) (Machine cut) 25 mm thick 69 Black Kadappa (one side polish) (Machine cut) 35mm thick 70 Both Sides Polished Kadappastone 25mm thick 71 Kota stone (Machine cut) upto 25-30mm thick one side polished 72 Kota stone (Hand cut) upto 25-30mm thick one side polished 73 Kota stone for step polished) upto 25mm thick (1.2*0.3M) 74 Ceramic tiles 30*30cm 75 Ceramic Antiskid Flooring Tiles 30 x 30 cm 76 Ceramic Tiles for dado 30 cm x 30 cm 77 Ceramic Tiles for dado 30 x 45 cm 78 Heavy duty interlocking concrete block 60mm thick gray 300 kg/sq.cm. 79 Heavy duty interlocking concrete block 60mm thick coloured 300kg/sq.cm 80 Heavy duty interlocking concrete block 80mm thick gray 300kg/sq.cm 81 Heavy duty interlocking concrete block 80mm thick coloured 300kg/sq.cm 82 Heavy duty interlocking concrete block 80mm thick rubber mould glossy 400kg/sq.cm 83 Heavy duty interlocking concrete block 40mm thick colour 200 kg/sq.cm 84 Telephone Black Granite 85 Green marble 86 Vitrified tiles Glossy Size 590 to 605 mm* 590 to 605 mm*8 to 10mm 87 Vitrifiedmatt finish - size 590 to 605 mm* 590 to 605 mm *8 to 10mm 88 Vitrified rustic matt stone finish size 590 to 605mm *590 to 605mm*8 to 10mm 89 Vertified stone effect finish size 590 to 605mm* 590 to 605mm * 8 to 10mm 90 Calcet Powder 91 Black Oxide powder 92 Fevi Matt Chemical 10 Kg Bag 93 Marble chips 94 Heavy duty interlocking concrete block 60mm thick rubber mould glossy 400kg/sq.cm 95 Tremix Treatment 100 mm thick 96 Marble mosaic chequered tiles (gray) 97 Colour cement 98 Heavy Duty Designer come. tile for flooring 99 Heavy Duty Designer come. tile for Steps 100 PVC flooring 101 Ceramic Tiles for dado 30 x 60 cm 102 Marble (other than white makrana) 103 Kota stone (Hand cut) upto 45-55mm thick one side polished 104 Vitrifiedmatt finish - size 895 to 900 mm* 895 to 900 mm *10 to 12 mm 105 Bees wax 106 Coal Tar 107 Common Spirit 108 French Polish 109 Varnish 110 Malemaine Polish 111 C.C.T.W. Ballies 125 mm Diameter 112 Oil enamel paint/flat/glossy paint(ready mix) (with I.S.I. Mark) 113 Synthetic paint (ready mix) 114 Catonic emulsion paint 115 White oil paint 100ml pack tin 116 Red Oxide paint 117 Cement paint 118 Steel Primer 119 Primer for plaster surface 120 Putty 121 Boiled linseed oil 122 Linseed oil double boiled 123 Terpentine 124 Wood Primer 125 Brush for lettring 126 Brush for road marking 5cm 127 Brush for marking road 8cm 128 Brush for road marking 10cm 129 Lustre paint 130 Textured Synthetic paint 131 White lead paint 132 Birla wall care putty 133 Aluminium Paint 134 Plastic emulsion paint 135 Acraylic Emulsion Paint 136 Exterior Primer 137 Weather shield paint 138 Neel 139 Oil bound distemper 140 Red powder / Geru 141 Saras 142 Scrapping sand paper size (30 * 20cm) 143 Dry distemper 144 Chunam / White lime Powder 145 paint Luster Paint 146 Roller Brush 147 Royale Luxury Emulsion Paint 148 Country Teak Wood 149 Ghana teak wood 150 Teak Wood planks above 2.5 m length 151 Teak wood bidding 1/2 * 1/2 152 T.W.Balli 100 mm dia 153 Jungle wood (non teak) normal 154 Bamboo 25mm dia.(4.5 to 6m) 155 Bamboo 50mm dia. 156 Bamboo Matting 1.2*1.8m 157 Ply wood 12mm thick 158 Ply wood 6mm thick 159 Mica laminate as per ISI 0.1 mm thick 160 Face Veneel board 4 mm thick 161 Particle board B.W.P.Phinol bond 12mm thick 162 Particle board B.W.P.Phinol bond 19 mm thick 163 Formica 1.5 mm thick 164 Tower bolt brass oxidised 10 mm dia length 150 mm 165 Ferical 166 Ply wood 18mm thick Commercial 167 Teak wood battens 50 * 25mm 168 Teak wood batten 25 mm * 12 mm 169 Veneer 3.5 to 4 mm thick 170 Alluminium rod 25mm dia 171 A.C.Corrugated sheet 6mm thick 172 A.C.Sheet ridge 173 A.C.Sheet plain 4mm thick 174 G.C.I. Sheet (Corrugated) 22 BWG 175 G.C.I. Sheet (Corrugated) 24 BWG 176 G.I. Sheet (plain) 22 BWG 177 G.I. Sheet (plain) 24 BWG 178 G.I.Washers 179 G.I. J or L hooks 6 mm dia. 180 Nails iron all size 181 Mangalore tiles class AA 182 Mangalore Ridge / Hip tiles 183 Mangalore Glass tiles 184 Mangalore Pattern cowl Ventilator 185 G.I. Pre coated trapezoidal 0.50 mm thick roof Metalic Coloured Sheet 186 G.I. Pre coated Ridge Sheet 187 Gypsum powder 188 Aluminium Alloy plate 2mm thick 189 Aluminium sheeting fixed with encapsuled lens type reflective sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable. 190 Plaster Of Paris 191 Decorative Board of Fibrous Plaster of Paris 12 to 15 mm 192 Acoustic Board 12 mm thick 193 Gypsum Board 12.5 mm thick 194 UPVC 3 layer trapezoidal 2.00 mm sheet 195 Light weight calcium silicate tile of size 595 x 595 mm of texture spin stone / cosmos / plain / Glode fine fissured. 196 Bioguard Board 16 mm 197 Ultima tile 198 Optra tile 199 Proflex Sheet 1 mm 200 Sky light 2 mm thick 201 Hanger rod 4mm thick 202 level Adjustment clip size 85x30x0.8mm 203 Dash fastener 12.5mm dia 50mm long 204 Soffit cleat 25mmx35mmx1.60mm 205 Wooden Screws with plastic rawl plugs 35mmx8mm 206 Light weight calcium silicate tiles of size 595x595mm of texture Spintone for Tegular edge ceiling 207 Plain Zinc Sheet 208 UPVC ridge/hip tiles 209 Hanger wire (2.68 mm dia), 1.82 m long 210 Dune edge tiles 211 Fine fissured edge tiles 212 Turbo ventilator 24 213 Tarat 36 width ( Gunny Cloth) 214 Wire glass 215 Fire wood 216 Precoated Galvanised Steel Plain Sheet 217 Connecting clip for supports 218 Dry wall screws 25 mm 219 Jointing Compound 220 Jointing Tape 221 Minaral Fibre board 600 x 600 mm 222 Perimeter Channel 80 x 8 mm 223 Screws 1 12 224 Screws 1/2 225 Rawal Plug 226 Plain Zinc Sheet 0.50 mm thick 227 Aldrop 300*16mm Chromium Plated 228 Aldrop Iron Oxidise 300*16mm 229 Aldrop Stainless steel 300*16mm 230 Handle 125mm M.S. Chromium Plated 231 Handle 150mm Brass Chromium plated (Rounded Shape) 232 Handle Alluminium 125 mm 233 Iron hinges chromium plated 125mm 234 But Hinges Alluminium 125mm 235 G.I.Screw 50mm 236 G.I.Screw 25mm 237 Stainless Steel Hinges - 125mm 14 gauge (Heavy Duty) 238 Tower bolt Aluminium 10mm dia.length 250mm 239 Tower bolt Aluminium 10mm dia.length 200mm 240 Tower bolt M.S. Chromium plated 10mm dia,length 300mm 241 Tower bolt M.S. Chromium plated 10mm dia,length 200mm 242 Cold Rolled Steel Hollow Section Door frame 1829*610mm 243 Aluminium stay 25cm 244 Aluminium stay 30cm 245 Jali fly proof 246 Jali chicken mesh 247 Jali welded mesh 25*25* 13 Guage 248 Jali welded mesh 25*25* 11 Guage 249 Jali welded mesh 50*25 13 Guage 250 Jali welded mesh 50*25 11 Guage 251 Hold fast Iron 300*40*5mm 252 Sliding Door Bolt Stainless Steel 12mm dia. 250mm length 253 Glass plain 3mm 254 Glass plain 5mm 255 Glass obscured (bajara) 5mm 256 G.I. Nut Bolt 257 Housing box to rolling shutter 258 Mechanical Gear For Rolling Shutter 259 Mortice lock superior 260 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side 261 Iron washer 12mm to 16mm 262 Aluminium Section 263 Nylon / PVC Gasket 264 Alluminium Screw 32 x 6 mm, 25 x 6 mm 265 Concealed locking arrangement of 100 mm length for sliding window 266 Alluminium Grill 7.50 mm thick 267 Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark 268 Iron Oxidized sliding door bolt 200 mm length, 12 mm dia 269 Powder and Chemicals for colour anodizing process of alluminium sections 270 Lock for Sliding Shutter 271 All Bearing Roller 272 All Frame Rail Angle 273 Welding Electrodes 274 C.R.C. Sheet 275 Abstrone Butadyne Styrine (ABS) Door Shutter including Transportation 276 Puff Insulation 35-40 Kg/Cumt. Density 277 PVC Door Shutter 34 mm thick Factory Made Shutter 278 FRP Door Shutter 30 mm thick Factory Made Shutter 279 FRP Door Shutter 35 mm thick Factory Made Shutter 280 Bison Pannel 281 PVC factory made solid panel door shutter with stainless steel fixutres & fastening 282 PVC factory made flush door 30 mm with stainless steel fixutres & fastening 283 Sliding door bolt Chromium plated 250mm 284 Acrylic Plain Sheet 3 mm 285 Aldrop Stainless steel 300*16mm 286 Aldrop Stainless steel 250*16 mm 287 Handle 150mm Stainless Steel (Rounded Shape) 288 Handle 200mm Stainless Steel (Rounded Shape) 289 Stainless Steel Hinges - 100mm 14 gauge (Heavy Duty) 290 Stainless Steel Hinges - 125mm 14 gauge(Heavy Duty) 291 Housing box to rolling shutter 292 Mechanical Gear For Rolling Shutter 293 Door StopperStainless Steel 294 Tower Bolt Stainless Steel 200 mm 295 Tower Bolt Stainless Steel 250 mm 296 Sliding Door Bolt Stainless Steel 250 mm 297 Handle Stainless Steel 100 mm 298 Eye Hole Lens 299 Rolling Shutter 300 Ply Wood 301 Stainless steel hooks and eyes 200 mm 302 Steel Window 303 Powder Coating 304 Rubber Lining 305 Ply wood 9 mm thick 306 Laminated board double 12mm thick 307 Alluminium Section anodized 308 Handle iron oxidised 150 mm 309 Hinges iron oxidised 100 mm 310 T. W. Particle board, both face laminated 12 mm 311 Battens T.W. 70 x 45 mm 312 Nuts and Bolts 313 Plain FRP Sheet 22 B.W.G. 314 TW Runner (6 x 3) 315 Alluminium Screw 316 F Patti 317 Teak wood planks above 2.5m length 318 Vision Panel 319 Solid core shutter 35 mm thick with commercial veneer facing and phenol bonded 320 Oil Paint 321 Acrylic Plain Sheet 2 mm thick 322 Aluminium Sheet 24 B.W.G 323 Alluminium Section with Powder Coating 324 Concealed lock 325 Mosquito proof Nylone net 326 Solid Core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side with bidding patty 327 G.I. Pipe 100mm dia. Medium type 328 G.I. Pipe 100mm dia. Heavy type 329 G.I. Pipe 15mm dia. Medium type 330 G.I. Pipe 15mm dia. Heavy type 331 G.I. Pipe 20mm dia. Medium type 332 G.I. Pipe 20mm dia.Heavy type 333 G.I. Pipe 25mm dia. Medium type 334 G.I. Pipe 25mm dia. Heavy type 335 G.I. Pipe 32mm dia. Medium type 336 G.I. Pipe 32mm dia.Heavy type 337 G.I. Pipe 40mm dia. Medium type 338 G.I. Pipe 40mm dia. Heavy type 339 G.I. Pipe 50mm dia. Medium type 340 G.I. Pipe 50mm dia. Heavy type 341 G.I. Pipe 65mm dia. Medium type 342 G.I. Pipe 65mm dia. Heavy type 343 G.I. Pipe 80mm dia. Medium type 344 G.I. Pipe 80mm dia. Heavy type 345 PVC Nahani Trap 75 mm 346 G.I.Clamps 100mm to 150mm 347 PVC Nahani Trap 150 mm 348 G.I.Clamps 12mm to 32mm 349 G.I.Clamps 40mm to 80mm 350 Anglo Indian W.C. Pan Colour 351 G.I.Fixtures 352 P.V.C. Cowl 100 mm 353 G.I.Screws 30mm 354 G.I.Screws 40mm 355 G.I.Union 25mm dia. 356 Gully trap cover with frame 357 Gun Metal stop tap with crutch wheel 20mm 358 Gun metal stop tap with crutch wheel 25mm 359 Gun metal stop tap with crutch wheel 15mm 360 Gun metal stop tap with crutch wheel 20mm 361 C.I.Bend 75mm dia. 362 C.I.Bend 100mm dia. 363 C.I.Bip tap 12mm 364 C.I.Grating 150mm dia. 365 C.I.Grating 100mm dia. 366 C.I.Grating 75mm dia. 367 C.I.Brackets 368 C.I.Collers 100mm dia. 369 C.I.Copllers 75mm dia. 370 C.I.Cover 45*30 cm with frame 371 C.I.Cowl / Vent 100mm dia. 372 C.I.Cowl / Vent 150mm dia. 373 C.I.Cowl / Vent 75mm dia. 374 C.I.Hinged Cover with frame 375 C.I.Man hole cover 50 kg. 376 C.I.Man hole cover 75 kg. 377 C.I.Man hole cover 100 kg. 378 C.I.Man hole cover 175 kg.Heavy (0.9*0.45m) 379 C.I.Nahani trap 100mm dia.(375mm long) 380 C.I.Nahani trap 75 to 80mm dia.(375mm long) 381 C.I.100*75*300 long arm (wt. 6kg)nahani trap 382 C.I.Soil pipe 100mm dia. 383 C.I.Soil pipe 150mm dia. 384 C.I,Soil pipe 75 to 80mm dia. 385 C.I.Shoe 75 mm dia. 386 C.I. Shoe 100 mm dia. 387 C.I.Shoe 150mm 388 Ball cock 15mm dia.P.V.C.FLOAT 389 Ball cock 25mm dia.P.V.C.FLOAT 390 Ball cock 40mm dia.P.V.C.FLOAT 391 Ball cock 50mm dia.P.V.C.FLOAT 392 Bib cock stop tap brass heavy 15mm 393 Bib cock stop tap brass heavy 20mm 394 Bib cockstop tap brass heavy 25mm 395 Bib tap 12mm brass medium 396 Colour wash hand basin 55*40cm 397 Colour wash hand basin 63*45cm 398 White glazed wash basin 45*30cm 399 White glazed wash hand basin 55*50cm 400 P.V.C. flexible Waste Pipe 32 mm dia 401 White Glazed Wash Hand Basin 63 x 45 cm 402 Sink white glazed 45*20*30cm 403 Pedestal for wash basin (standard size) 404 C.C.Septic tank 0.9m dia.(2.5m long) 405 C.C.Septic tank 1.20m dia.(2.5m long) 406 C.I.Steps for manhole 407 C.I.Cover with frame (Gully trap) 408 C.I.Plug Bend 150MM dia. 409 Clamp for G.I.pipe 25mm 410 Colour European type W.C.Pan 411 European type glazed W.C.pan 412 W.C.PAN Coloured glazed 64CM.(Orissa) 413 W.C.PAN White glazed 58 CM.Indian 414 W.C.PAN White glazed 57.50 CM (Orissa) 415 Fibre flushing tank for W.C. 416 Flushing tank automatic Urinal 10ltr. C.I. 417 Flushing tank automatic Urinal 5ltr. (P.V.C.) 418 Low level flush pr. St. 10ltr. 419 Flat back Urinal 420 Stall Type Urinal 421 Lipped type Urinal 422 Coloured glazed full stall Urinal 423 Bleaching Powder 424 Potassium Permanganate 425 Nylon Brush 426 Duster 427 Plastic Bucket 428 Coir 429 Gunny Cloth 430 Kharata 431 Wheel stop tap brass 15mm 432 Wheel stop tap brass 20mm 433 Wheel stop tap brass 25mm 434 Socket brass for 32mm tap 435 Socket brass for 40mm tap 436 Socket brass for 50mm tap 437 Socket brass for 65mm tap 438 Socket for 100mm tap 439 Socket for 15mm tap 440 Socket for 20mm tap 441 Socket for 25mm tap 442 Socket for 32mm tap 443 Socket for 40mm tap 444 Socket for 50mm tap 445 Socket for 65mm tap 446 Socket for 80mm tap 447 Span Yarn 448 Strainer for 100mm 449 Strainer for 40mm 450 Strainer for 50mm 451 Strainer for 80mm 452 Strainer for 15mm 453 Strainer for 20mm 454 Strainer for 25mm 455 Stone ware pipe 100mm dia. 456 Stone ware pipe 150mm dia. 457 Stone ware pipe 225mm dia. 458 Stone ware glazed pipe half round 100mm dia. 459 Stop tap brass with crunch wheel 15mm dia. 460 Towel rod with clamps 16mm dia. 461 Mirror 40*50cm. With plastic frame 462 Brass T Thimble Socket 32mm dia. 463 Brass wheel stop tap 32mm dia. 464 Brass wheel stop tap 40mm dia. 465 Brass wheel stop tap 50mm dia. 466 Brass wheel stop tap 65mm dia. 467 Brass wheel stop tap 80mm dia. 468 Half turn flush cock 25mm dia. 469 12mm flexible inlet pipe connection 470 Bell mouth cover 100mm dia. 471 Box chamber with lock 0.6*0.45m 472 Brass nozzle pillar tap 12mm 473 Black bakelite seat to european closer 474 Concussion push button type gun metal tap 15 to 25mm dia. 475 Coupling cast Iron 100mm dia. 476 Coupling cast Iron 80mm dia. 477 Chromium plated 12mm dia.bib cock 478 C.I.Trap grating 15*10 cm 479 C.I.Y junction 100mm dia. 480 C.I.Y junction 150mm dia. 481 C.I.Y junction 75mm dia. 482 Enameled bend 40mm dia. 483 Ferrul for C.I.pipr 100mm 484 White glazed foot rest chequred 25*10 cm 485 Half round earthware pipe 100mm(60cm long) 486 Half round earthware pipe 150mm(60cm long) 487 Jute Rope 488 Half round chaina ware pipe 100mm(60cm long) 489 Lead pipe 32mm dia. 490 Mohagani seat with lid 491 Mosquito proof coupling 492 Non-return valve 15mm for water meter 493 Non-return valve 25mm for water meter 494 Non-return valve 20mm for water meter 495 Piller tap 12mm dia.chromium plated heavy 496 P.Trap and lead pipe upto 40mm dia. 497 Rubber gasket (25, 28 and 20 cm) 498 Rubber Incertion 499 Rubberised adhesive 500 Salt glazed stone ware gully trap (150*150mm) 501 Self project tap brass chromium plated 15mm 502 Sewer trap 503 Shower rose chromium plated brass 10cm 504 P.V.C. pipe 15mm dia.10kg/cm2 pressure(class IV) 505 P.V.C. pipe 20mm dia.10kg/cm2 pressure(class IV) 506 P.V.C. pipe 25mm dia.10kg/cm2 pressure(class IV) 507 P.V.C. pipe 32mm dia.10kg/cm2 pressure(class IV) 508 P.V.C. pipe 40mm dia.10kg/cm2 pressure(class IV) 509 P.V.C. pipe 50mm dia.10kg/cm2 pressure(class IV) 510 P.V.C. pipe 60mm dia.10kg/cm2 pressure(class IV) 511 P.V.C. pipe 75mm dia.4 kg/cm2 pressure(class II) 512 P.V.C. 75 mm Soil Pipe 6 Kg/cm2 Pressure 513 P.V.C. pipe 90mm dia.4 kg/cm2 pressure(class II) 514 P.V.C.pipe 110mm dia.4kg/cm2 pressure (class II) 515 P.V.C. 110 mm Rain Water Pipe 6Kg/cm2 Pressure 516 P.V.C. 110 mm Soil Pipe 6 Kg/cm2 Pressure 517 P.V.C.pipe 140mm dia.4kg/cm2 pressure (class II) 518 P.V.C.pipe 160mm dia.4kg/cm2 pressure (class II) 519 P.V.C.pipe 160mm dia.Soil Pipe 520 P.V.C.pipe 160mm dia. Rain Water Pipe 521 P.V.C.Socket 15mm dia. 522 P.V.C.Socket 20mm dia. 523 P.V.C.Socket 25mm dia. 524 P.V.C.Socket 32mm dia. 525 P.V.C.Socket 40mm dia. 526 P.V.C.Socket 50mm dia. 527 P.V.C.Socket 60mm dia. 528 P.V.C.Flushing tank (12 ltr. Capacity) 529 Flush valve 32mm dia. 530 Ferocret tank 531 Stainless Steel sink of size 600*510*200mmof nirali or equivalent make 532 C.P.pillar cock jaquar make continental (Cat.No. CON-011) 533 C.P.pillar cock (ISI)jaquar make continental 534 C.P.pillar cock long neck with aerator jaquar make continental (Cat.No. CON- 021) 535 C.P.Bib cock (ISI)jaquar make continental (Cat.No. CON-037) 536 C.P.Bib Cock long thread jaquar make continental (Cat.No. CON-039) 537 C.P.2-way bib cock jaquar make continental (Cat.No. CON-041) 538 C.P.bib cock with wall flange long thread jaquar make continental (Cat.No. CON- 047) 539 C.P.Bib cock with nozzle jaquar make continental (Cat.No. CON-049) 540 C.P.Angular stop cockjaquar make continental (Cat.No. CON-053) 541 C.P.Angular stop cock long thread jaquar make continental(Cat.No. CON-055) 542 C.P.angular stop cock with wall flange jaquar make continental(Cat.No. CON- 059) 543 C.P.central hole basin mixer without popup waste system with 450mm long braided hoses jaquar make continental (Cat.No. CON-167B) 544 C.P.wall mixer with telephone shower arragnementonly but without teltphone shower crutch jaquar make continental (Cat.No. CON-217) 545 C.p.wall mixer non-telephonic shower arrangement jaquar make continental (Cat.No. CON-219) 546 C.P.wall mixer(wall mounted model) with telephone shower arrangement only and with telephone shower crutch jaquar make continental (Cat.No. CON-267) 547 C.P.wall mixer with provision for overheadshower with 115mm long bend pipe and wall flange jaquar make continental (Cat.No. CON-273UPR) 548 C.P.sink mixer with swinging casted spout (wallmounted) jaquar make continental (Cat.No. CON-309) 549 C.P.sink mixer swinging spout (table mounted model) 450mm long braided hoses jaquar make continental (Cat.No. CON-309B) 550 C.P.sink cock with swinging casted spout jaquar make continental (Cat.No. CON- 347) 551 C.P.sink cock with raised J shaped swinging casted spout (table mounted) jaquar make continental (Cat.No. CON- 359) 552 C.p.shower arm 190mm long light body with wallflange jaquar make continental (Cat. No. SHA - 477) 553 C.P.Flush cock with wall flange 25mm with plain knob jaquar make continental (Cat.No. FLR 6081) 554 C.P.Towel rail 24 jaquar make continental (Cat. No. ACN 1111N ) 555 C.P.Towel ring square jaquar make continental (Cat. No. ACN 1121N ) 556 C.P.Soap dish hooker jaquar make continental (Cat. No. AKB 35731 ) 557 C.P.soap dish (polyurethane)jaquar make continental (Cat. No. AQN 7733 ) 558 C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751) 559 C.P.Toilet rack 24with lower hanger jaquar make continental (Cat. No. ACN 1181N) 560 C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563) 561 C.P.Pillar cock jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7011 ) 562 C.P.Bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT7037 ) 563 C.P.2-way bib cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7041) 564 C.P.Angular stop cock with wall flange aqua make queens collection (quarter turn fitting) (Cat. No. QQT 7053) 565 C.P.central hole basin mixer with regular spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7167bB ) 566 C.P.central hole basin mixer with regular spout with popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7169b ) 567 C.P.central hole basin mixer with small spout without popup waste system with 450mm longbraided hoses jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7171B) 568 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only but without crutchjaquar make queens collection(quarter turn filling) (Cat. No. QQT 7217 ) 569 C.P.wall mixer non-telephonic shower system jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7219 ) 570 C.P.wall mixer (wall mounted model) with telephonic shower arrangement only and with telephone shower crutch jaquar make queens collection (quarter turn filling) (Cat. No. QQT 7267) 571 Hydraulic door closer 572 cPVC pipe 15mm dia. 573 cPVC pipe 20mm dia. 574 cPVC pipe 25mm dia. 575 cPVC pipe 32mm dia. 576 cPVC pipe 40mm dia. 577 cPVC pipe 50mm dia. 578 cPVC Coupling for 15mm dia. 579 cPVC Coupling for 20mm dia. 580 cPVC Coupling for 25mm dia. 581 cPVC Coupling for 32mm dia. 582 cPVC Coupling for 40mm dia. 583 cPVC Coupling for 50mm dia. 584 Elbow 90 Degree for 15mm dia. 585 Elbow 90 Degree for 20mm dia. 586 Elbow 90 Degree for 25mm dia. 587 Elbow 90 Degree for 32mm dia. 588 Elbow 90 Degree for 40mm dia. 589 Elbow 90 Degree for 50mm dia. 590 Tee for 15mm dia. 591 Tee for 20mm dia. 592 Tee for 25mm dia. 593 Tee for 32mm dia. 594 Tee for 40mm dia. 595 Tee for 50mm dia. 596 End cap for 15mm dia. 597 End cap for 20mm dia. 598 End cap for 25mm dia. 599 End cap for 32mm dia. 600 End cap for 40mm dia. 601 End cap for 50mm dia. 602 Ball cock for 15mm dia. 603 Ball cock for 12mm dia. 604 Ball cock for 25mm dia. 605 Ball cock for 32mm dia. 606 Ball cock for 40mm dia. 607 Araldite adhesive 608 Ball valves for 50mm dia. 609 Male adapter (Brass Threads) for 15mm dia. 610 Male adapter (Brass Threads) for 20mm dia. 611 Male adapter (Brass Threads) for 25mm dia. 612 Male adapter (Brass Threads) for 32mm dia. 613 Male adapter (Brass Threads) for 40mm dia. 614 Male adapter (Brass Threads) for 50mm dia. 615 Male adapter (Plastic Threads) for 15mm dia. 616 Male adapter (Plastic Threads) for 20mm dia. 617 Male adapter (Plastic Threads) for 25mm dia. 618 Male adapter (Plastic Threads) for 32mm dia. 619 Male adapter (Plastic Threads) for 40mm dia. 620 Male adapter (Plastic Threads) for 50mm dia. 621 Female adapter (Brass Threads) for 15mm dia. 622 Female adapter (Brass Threads) for 20mm dia. 623 Female adapter (Brass Threads) for 25mm dia. 624 Female adapter (Brass Threads) for 32mm dia. 625 Female adapter (Brass Threads) for 40mm dia. 626 Female adapter (Brass Threads) for 50mm dia. 627 Female adapter (Plastic Threads) for 15mm dia. 628 Female adapter (Plastic Threads) for 20mm dia. 629 Female adapter (Plastic Threads) for 25mm dia. 630 Union for 15mm dia. 631 Union for 20mm dia. 632 Union for 25mm dia. 633 Union for 32mm dia. 634 Union for 40mm dia. 635 Union for 50mm dia. 636 Cross for 15mm dia. 637 Cross for 20mm dia. 638 Step over Bend 15mm dia. 639 Step over Bend 20mm dia. 640 Tee holder for 15mm dia. 641 Tee holder for 32mm dia. 642 End plug threaded for 15mm dia. 643 R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg 644 R.C.C.Chamber cover with frame 90cm*45cm Medium Duty 140kg 645 R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg 646 R.C.C.Chamber cover with frame 60cm*45cm Medium Duty 100kg 647 I.S.I.Ferrul Connection15mm dia. 648 I.S.I.Ferrul Connection 20mm dia. 649 I.S.I.Ferrul Connection 25mm dia. 650 I.S.I.Ferrul Connection 32mm dia. 651 I.S.I.Ferrul Connection 40mm dia. 652 I.S.I.Ferrul Connection 50mm dia. 653 Water meter 15 mm diameter 654 Water meter 20 mm diameter 655 Water meter 25 mm diameter 656 Water meter 40 mm diameter 657 Water meter 50 mm diameter 658 Water meter 80 mm diameter 659 Water meter 100 mm diameter 660 Non return Valve 40 mm diameter 661 Non return Valve 50 mm diameter 662 Non return Valve 80 mm diameter 663 Non return Valve 100 mm diameter 664 Colour Wash Hand Basin 0.45 x 0.30 665 White Glaze Earth Sink 0.6 x 0.2 x 0.45 666 Clamp for G.I.pipe 200mm 667 Earopean type glazed W.C.pan 68cm 668 Earopean white glazed earthen ware closet pan 669 P.V.C. Nahni Trap 670 P.V.C. Connector. 15 mm dia 671 Low level flushing cistern 672 Upvc sanitary pipes all 20 mm dia. 673 Upvc sanitary pipes all 75 mm dia. 674 Bib cock stop tap brass heavy 15mm 675 Stainless Steel sink of size 610 x 460 x 200 mm of nirali or equivalent make 676 Upvc sanitary pipes all 63 mm dia. 677 W.C.PAN Colour glazed 57.50 CM (Orissa) 678 Piller cock mixer & Angle cock 679 Upvc sanitary pipes all 25 mm dia. 680 Upvc sanitary pipes all 15 mm dia. 681 Cement 682 Upvc sanitary pipes all 40 mm dia. 683 Upvc sanitary pipes all 50 mm dia. 684 Stainless Steel sink of size 470 x 420 x 178 mm of nirali or equivalent make 685 Bib cock Long Arm 686 Bottletrap wash basin 32 mm Cromium Plated 687 Upvc sanitary pipes all 32 mm dia. 688 Hamp rope 689 Bib cock cock stop tap brass heavy 15 mm 690 Colour wash hand basin 45*30cm 691 Ultra 250 mm. dia. uPVC 90 degree junction chamber base with U trap 692 Ultra 250 mm.dia. uPVCCover & Frame 693 uPVC Blanking Plug 110 mm 694 uPVC 90 degree bend 695 Ultra Shaft 250x470mm 696 Water jet with accessories 697 White glazed full stall urinal 698 Glass plain 6mm thick 699 White Glazed Earthenware Squatting plate (Ladies Urinal) 700 Autoclosing pillar cock of pressmatic tap 701 PVC Aqua kraft type super bib tap 15 mm 702 PVC Aqua kraft type super Two Way bib tap 15 mm 703 Super push button type cock / tap with flange 15 mm 704 PVC Aqua kraft type super jet spray 15 mm 705 PVC Aqua kraft type super right angle stop tap 706 PVC Aqua kraft type super Pillar tap 15 mm 707 Fixing in CC BK Clamp, Battan 708 Wall Mounted European type glazed W.C.pan 709 Super wall sink type tap with flange 15 mm 710 Two Way bib tap with flange 711 super jet spray with flange 2 in 1 faucet 1.50 metre long 712 Chloryphyriphos 713 Solvent 714 D.D.V.P. 715 Malathion 716 Pine Oil 717 S.S. Pipe 40 mm dia 718 Mild Steel 719 Barbed Wire 720 Concentina Coil Wire 721 M.S.Steel 722 RCC Pole 723 Green marble 724 Telephone black granite 725 Karva (for roof and sides 10kg bundle) 726 Tatti 727 Bamboo 25mm dia. 728 Lightening Conductor 729 Salt 730 Copper Tape width 25mm*3mm thick 731 Aluminium Strips 50 mm x 3 mm 732 Cripped wire3 - 0 , 4 - 0 and 5 - 0 wide 733 Welding Electrodes 734 Welded Mesh 75 X 75 mm 735 Welded Mesh 150 X 150 mm 736 Tarat 36 width (Gunny cloth) 737 Chain link3 - 0 , 4 - 0 and 5 - 0 wide 738 Bamboo 50mm dia. 739 Hold Fast for Steel Gate 740 Nut Boldts 12 mm dia. /Nails all size 741 M.S. Pipe 40 mm dia 742 Welding Rod 743 PVC hand rail cover 744 Antitermite Liquid 745 Lock for Drawer/Cupboard 746 Glycel 747 Hing 748 Hot lime 749 Ladder 750 Fine tooth chisel 751 Saw 752 Gloves 753 R.C.C.Pipe 1200mm dia.(Np3)2.5m long 754 R.C.C.Pipe 1100mm dia.(Np3)2.5m long 755 R.C.C.Pipe 1000mm dia.(Np3)2.5m long 756 R.C.C.Pipe 900mm dia.(Np3)2.5m long 757 R.C.C.Pipe 800mm dia.(Np3)2.5m long 758 R.C.C.Pipe 700mm dia.(Np3)2.5m long 759 R.C.C.Pipe 600mm dia.(Np3)2.5m long 760 R.C.C.Pipe 500mm dia.(Np3)2.5m long 761 R.C.C.Pipe 450mm dia.(Np3)2.5m long 762 R.C.C.pipe Np2 class 1000mm dia. 2.5m long 763 R.C.C.Np2 Pipe Collar 1000 mm Dia. 764 R.C.C.pipe Np2 class 1200mm dia. 2.5m long 765 R.C.C.Np2 Pipe Collar 1200 mm Dia. 766 R.C.C.pipe Np2 class 1800mm dia. 2.5m long 767 R.C.C.pipe Np2 class 900mm dia. 2.5m long 768 R.C.C.Np2 Pipe Collar 900 mm Dia. 769 R.C.C.pipe Np2 class 800mm dia. 2.5m long 770 R.C.C.Np2 Pipe Collar 800 mm Dia. 771 R.C.C.pipe Np2 class 700mm dia. 2.5m long 772 R.C.C.pipe Np2 class 600mm dia. 2.5m long 773 R.C.C.Np2 Pipe Collar 600 mm Dia. 774 R.C.C.pipe Np2 class 500mm dia. 2.5m long 775 R.C.C.pipe Np2 class 450mm dia. 2.5m long 776 R.C.C.Np2 Pipe Collar 450 mm Dia. 777 R.C.C.pipe Np2 class 100mm dia. 2m long 778 R.C.C.pipe Np2 class 150mm dia. 2m long 779 R.C.C.pipe Np2 class 225mm dia. 2m long 780 R.C.C.pipe Np2 class 300mm dia. 2m long 781 RCC Pipe Np 4 heavy duty non presure pipe 1000 mm diameter 782 RCC Pipe Np4 heavy duty non presure pipe 1200 mm diameter 783 RCC Pipe Np4 heavy duty non presure pipe 900 mm diameter 784 Cement 785 Structural Steel 786 TMT FE - 500 787 HCRM/CRS Reinforcement 788 Bitumen VG 10 (Bulk) (80/100) 789 Bitumen VG 30 (Bulk) (60/70) 790 Bitumen VG 40 (Bulk) (30/40) 791 Bitumen VG 30 (Packed) (60/70) 792 Bitumen VG 40 (Packed) (30/40) 793 Bitumen VG 10 (Packed) (80/100) 794 Sand - Natural/V.S.I.(Vertical Shaft Impact Crusher)Quality Artifitial Sand 795 Sand - Crushed 796 Natural Sand - Screened (for plaster work only) 797 Bricks II Class 798 Rubble stone excluding royalty 799 Aggregate 40 mm (Hand Broken) Blasted excluding royalty 800 Aggregate 25 mm 801 Aggregate 20 mm 802 Aggregate 12 mm 803 Aggregate 10 mm 804 Aggregate 6 mm 805 Stone Dust 806 Soft Murum 807 Hard Murum 808 Water 809 White Cement 810 Plasticizer 811 Stainless Steel Plate 812 EMULSION RS1 ( Hincol) BULK 813 EMULSION RS1 ( Hincol) Packed 814 WASTE PLASTIC to be used in bituminous treatment as per IRC SP-098-2013 815 Portland Slag Cement (PSC) 816 Ground Granulated Blast Furnance Slag (GGBS) 817 Bitumen VG-40 (bulk (30-40 grade)) 818 Stone Boulder of size 150 mm and below at Cruser Plant 819 Supply of quarried stone 150 - 200 mm size for Hand Broken at site 820 Boulder with minimum size of 300 mm for Pitching at Site 821 Coarse sand at Mixing Plant 822 Coarse sand at Site 823 Murum at Site 824 Fly ash conforming to IS: 3812 ( Part II &I) atHMP Plant / Batching Plant / Crushing Plant 825 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) 826 Close graded Granular sub-base Material 53 mm to 9.5 mm 827 Close graded Granular sub-base Material37.5 mm to 9.5 mm 828 Close graded Granular sub-base Material26.5 mm to 9.5 mm 829 Close graded Granular sub-base Material9.5 mm to 4.75 mm 830 Close graded Granular sub-base Material9.5 mm to 2.36 mm 831 Close graded Granular sub-base Material 4.75mm to 2.36 mm 832 Close graded Granular sub-base Material 4.75mm to 75 micron mm 833 Close graded Granular sub-base Material2.36 mm 834 Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. 835 Coarse graded Granular sub-base Material2.36 mm & below 836 Coarse graded Granular sub-base Material4.75mm to 75 micron mm 837 Coarse graded Granular sub-base Material4.75 mm to 2.36 mm 838 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 839 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 840 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 841 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 842 Coarse graded Granular sub-base Material 53 mm to 26 .5mm 843 Aggregates below 5.6 mm 844 Aggregates 22.4 mm to 2.36 mm 845 Aggregates 22.4 mm to 5.6 mm 846 Aggregates 45 mm to 2.8 mm 847 Aggregates 45 mm to 22.4 mm 848 Aggregates 53 mm to 2.8 mm 849 Aggregates 53 mm to 22.4 mm 850 Aggregates 63 mm to 2.8 mm 851 Aggregates 63 mm to 45 mm 852 Aggregates 90 mm to 45 mm 853 Aggregates 10 mm to 5 mm 854 Aggregates 11.2 mm to 0.09 mm 855 Aggregates 13.2 mm to 0.09 mm 856 Aggregates 13.2 mm to 5.6 mm 857 Aggregates 13.2 mm to 10 mm 858 Aggregates 20 mm to 10 mm 859 Aggregates 25 mm to 10 mm 860 Aggregates 19 mm to 6 mm 861 Aggregates 37.5 mm to 19 mm 862 Aggregates 37.5 mm to 25 mm 863 Aggregates 6 mm nominal size 864 Aggregates 10 mm nominal size 865 Aggregates 13.2/12.5 mm nominal size 866 Aggregates 20 mm nominal size 867 Aggregates 25 mm nominal size 868 Aggregates 40 mm nominal size 869 Binding wire 870 Bitumen ( Cationic Emulsion ) 871 Bitumen VG-30 (bulk (60-70 grade)) 872 Bitumen VG -10 (bulk (80-100 grade )) 873 Bitumen (Cutback ) 874 Bitumen (emulsion) 875 Bitumen (modified graded) (bulk Cr-60) 876 Geo grids 877 Geomembrane 878 Geonets 879 Geotextile 880 Geotextile filter fabric 881 LDO 882 Pavement Marking Paint 883 RCC Pipes 200 mm dia, 2.5 m long for drainage 884 Quarry spall 885 Road Barricade Perforated fench(2000 x 1000 x 40 mm ) 886 Road Barricade Sand Fillable only 1 mtr.[1000(L) x 350(W) x 760(H) mm ] 887 Polypropylene multifilament woven geotextile fabric for filter layer (approved opening size 0.075mm & water permeability 9.00 Litres/Sqm/Second) 888 Polythene bags 889 Trap stones weighing upto 20 kilogram 890 Trap stones weighing from 20 to 50 kilogram 891 Trap stones weighing from 50 to 100 kilogram 892 Trap stones weighing from 100 to 200 kilogram 893 Trap stones weighing from 200 to 300 kilogram 894 Trap stones weighing from 300 to 500 kilogram 895 Trap stones weighing from 500 to 1000 kilogram 896 Trap stones weighing from 1000 kilogram and above 897 Laterite stones rubbles upto 20kilogram 898 Laterite stones rubbles from 20 to 50 kilogram 899 Laterite stones rubbles from 50 to 100 kilogram 900 Gabions boxes of mechanically woven hexagonal shaped wire mesh of type, 10 cm x 12 cm. edges mechanically selvedged (Zinc+ PVC) coated G.I. wires as per BS: 443, mesh wire dia. 3.00 mm, edge wire 3.70 mm size 901 a) Gabion size - 1.00 x 1.00 x 1.00 M 902 b) Gabion size - 1.50 x 1.00 x 1.00 M 903 c) Gabion size - 2.00 x 1.00 x 1.00 M 904 d) Gabion size - 3.00 x 1.00 x 1.00 M 905 e) Gabion size - 4.00 x 1.00 x 1.00 M 906 Flexible gabions of polypropylene material of 10 mm ø four strand mesh size of 150mm x 150 mm size 907 a) Gabion size - 1.00 x 1.00 x 1.00 M 908 b) Gabion size - 1.50 x 1.00 x 1.00 M 909 c) Gabion size - 2.00 x 1.00 x 1.00 M 910 d) Gabion size - 3.00 x 1.00 x 1.00 M 911 Used tyre fender 912 Geotextile bags of sizes 913 a) Geotextile bags size - 1.00 x 0.70 M 914 b) Geotextile bags size - 2.00 x 1.50 M 915 Geotextile tube of 20 metre long & 916 a) Geotextile tube diameter - 3.00 M 917 b) Geotextile tube diameter - 1.50 M
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
35.
Rural Development #10350823 Price Bid
Tender For Supply Of Construction Material-2 Soft Murum With Royalty 3 Hard Murumwith Royalty 4 Bricks Red 5 Bricks White 6 Sandwith Royalty 7 Black Sandwith Royalty 8 20Mm Metal 9 10 Mm Metal 10 40 Mm Metal 11 80 Mm Metal 12 Dust 13 Steel 6 Mm 14 Steel 8 Mm 15 Steel 10Mm 16 Steel 12Mm 17 Steel 16 Mm 18 Steel 20 Mm 19 Cement 53 Gredi.S.I With Gst 20 J.C.B. 21 J.C.B. 22 Kota Stone 23 Floor Tiles 24 Glaze Tiles 25 Mixure Machine With Diesel 26 Vibratar 27 Road Roller 28 Cement Chair 29 Rcc Cement Pipe 300 Mm 30 Rcc Cement Pipe 450 Mm 31 Rcc Cement Pipe 600 Mm 32 Rcc Cement Pipe 900 Mm 33 Water Tanker 12000 Liter 34 Water Tanker 5000 Liter 35 Fabrication Work 36 Paving Block 37 Three Siter Cement Chair 38 Information Bord 39 Binding Tar 40 Door Frame Cement 41 Bituman ( Damber ) 42 Water Tank 43 Khile
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Maharashtra View Result →
36.
Tourism #10317833 Price Bid
Smriti Van At Chabisay Seyok Under Forest Department,Gta. - Boundary Fence ( L = 595.00 m): Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .a) Depth exceeding 1.50m 2 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 3 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge. 4 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. 5 Cost of Boulder 150 mm size delivered and stacked at site 6 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety 7 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 8 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. i) Tor/ mild steel ( other manufacture nat specified) 9 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 10 M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m 11 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface.with (4:1) cement motera) 20 mm thick 12 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(b) On steel or other metal surface : 13 Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised C clips to grid of horizontal strands of galvanised high tensile spring steel wire of fixed to the vertical posts by means ofgalvanised special clips, bolts and nuts etc.(I) 50 mm. x 50 mm. x 8 g. 14 Footpath (L= 565.00 m Width-1.50m)Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.a) Depth exceeding 1.50m 15 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 16 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 17 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. (a) Single brick flat soling (thickness 75 mm.) 18 Cost of Boulder 150 mm size delivered and stacked at site 19 Filling in Foundation or Plinth with Silver Sand in layers not exceeding 150mm as directed and consolidating the same by thorough saturation with water ramming complete including the cost of supply of sand 20 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes ii ) River bazree (1:1.5:3) 21 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site.a) In road and jhora work 22 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 23 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 24 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 25 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 26 Observatory Tower (G+2 Storied) Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. a) Depth exceeding 1.50m 27 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 28 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres. a) Depth exceeding 1.50m foundation filling 1/3 of ….. 29 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 30 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. (a) Single brick flat soling (thickness 75 mm.) 31 Cost of Boulder 150 mm size delivered and stacked at site 32 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety 33 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 34 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 35 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 36 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site. a) In road and jhora work 37 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .25 to 30 mm thick shuttering 38 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 39 (d) Extra for works beyond the roof of ground floor per additional floor(i) upto 4th (per floor) and in basement. 40 second floor/ second basement 41 Third Floor 42 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) conencted to one another with bracket gusset cleats as per design, direction of Engineer-in-charge complete ihncluding cuting to requisite size fabrication with necessary metal are welding conforming to IS 816-1956 & IS 9595 using electrodes of apporved make and brand conforming to IS 814-1957 haulage, hoisting and erection all complete.The rate includes the cost of rolled steel section, confumables such as the cost of gas and hirea charges of all tools and plants and labour required for the works incouding all incidental charges such as electricity charges labour insurance charges etc. i) For trusses spanning u p to 12.00 mSquare tube 50x50x4.5 mm th = 5.95 kg/m 43 125mm thick brick work with 1st class bricks in cement morter (4:1) in groundfloor. 44 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 45 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement moter, 15 mm thick 46 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 47 Supplying fitting and fixing 1st quality cremic tiles in wall and floors to match with the existing workmaterials(WALL)(b) Area of each tile above 0.09 Sq.m(i) Coloured or decorative 48 Supplying fitting and fixing 1st quality cremic tiles in wall and floors to match with the existing workmaterials(FLOOR)(b) Area of each tile above 0.09 Sq.m(i) Coloured or decorative 49 Supplying and laying true to line and level vitrified tiles of approved brand(size not less than 600mmx600mmx10mm thk) in floor, skirting etc. set in 20mm sand cement mortar(1:4) and 2mm thk cement slurry back side of tiles using cement @ 2.91kg/m2 or using polymerised adhesive(6mm thk layer applied directly over finished artificial stone floor/mosiac etc without any backing course) laid after application slurry using 1.75kg of cement per m2 below mortar only, joints grouted with admixture of white cemet and colouring pigment to match with colour of tiles/epoxy groutmaterials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete true to materials, labour and all other incidential charges complete true to manufacturers specification and direction of Engineer-In-Charge.(White cement, synthetic adhesive and grout materials to be supplied by the contractor) I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. 50 Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohrs hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N(A) Deep Colour & White 51 Wood work in door and window frames fine dressed fitted and fixed in position complete including a protective coat of painting at the contact surface of the framef) sissu, gammar, champ 52 Panel shutters with both side raised panels of doors and windows as per design (each panel consisting of a single plank without joint), including fitting and fixing the same in position but excluding the cost of hinges and other fittings. (f) sissu, gammar, champ 53 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. 54 Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. 55 M.S. clamps for fixing doors & windows framesmade of flatbent bar, end bifurcated, fixedin cement concrete with stone chips (4:2:1) fitted & fixed complete as per direction.b) 40mmx6mm above 250 mm 56 Iron butt hinge of approved quality fitted and fixed with steel screws with I S I mark100 mm x 75 mm x 3.5 mm 57 Anodised aluminium Aldrop/ Sliding of approved quality manufactured from extruded section conforming to I.S: specificatiion (I.S. 2681/66) fitted and fixed complete.(i) 250mm x 16mm dia 58 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated(iv)150mm long x 10 mm dia rod 59 Anodized aluminium D type handleof approved quality manufactured from extruded section confirming the I.S.230/72fitted & fixed complete. 150mm grip x 12 mm dia rod 60 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M] 61 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M] 3 track 62 Labour charge for fabricating and installation of composite door window, partition made from annodised extruded alloy sections for the following units: (A)Glazed aluminium windows ,made of extruded and anodised alloy aluminium sectn fabrications ,including cutting to proper shape and size , drilling and alinging of window and shutter frame fitted with a built locking arrangements, sliding rollers and other necessary fittngs, fixture, adhesives and joineries along with neooprene or EPDM gasketing inbetween window frame and masonry work( walls columns window, lintels etc) as well as between stars and shutters frame and fixing glass & Polysulphate Sealant and inbetween shutter and window frame where necessary including cutting to requisite size and fixing the glass as per drawing, specification and direction of Engineer-in-Charge. The rate includes the hire charges of all tools and plants ,including all incidential charges , adhesive,joineries such as screws cleats angles etc. but excludes the cost of extruded aluminium sections, glass, neoprene/ EPDM gasketing, locking arrangements and rollers. 3 track sliding window 63 Supplying bubble free float glass of approved make and brand. Confirming to IS 2835-1987. (ix) 5mm thick coloured/ tinted/ smoke glass . 64 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground flooR Grills above 10 kg/m2 to 16 kg/m2 65 Lime punning about 3 mm thick with stone lime and shell lime 66 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 67 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIc(b) Two Coats 68 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 69 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 70 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On timber or plastered surface : 71 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On Steel surface : 72 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On timber or plastered surface :a. iv. 2 coat any shad 73 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On timber Steel surface :a. iv. 2 coat any shad 74 Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials(Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:(ii) 100mm Dia 75 D) shoe:(ii) 110mm Dia 76 SANITARY & PLUMBING:Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)Work above ground.32 mm 77 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)15 mm (b) For CONCEALED wORK 78 upply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63]A. 6 Kg / Sq.Cm. (Working Pressure) (Dia)75mm 79 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).32 mm 80 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).15 mm 81 Supplying, fitting and fixing bib cock or stop cock. (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). 82 Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body 83 Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). 84 (f) hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall 85 Supplying, fitting fixing pillar cock of approved makec) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR 86 e ) CP Centre hole basin mixture with regular spout without popup waste system with 450mm long braided hoses( Equivalent to Code No. 5167(B) & Model - FLORENTINE OF JAQUAR or similar brand 87 Supplying P.V.C. water storage tank of approved make quality with closed top with lidUPTO 1000 Ltr. 88 Wash basin wite vitrous china of approved make ( without fittings) supplied, fitted and fixed in position on 75 mm x 75mm x 75mm wood blocks and cast iron brackets including two coat of painting oa C. I bracket (i) 450 x 300mm size 89 Supplying fitting fixing EWC in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.With S Trap 90 Supplying fitting fixing Closet seat of approved make with lid and CP hinges , rubber buffer and brass screwscompletea) EWCiv) Bestolite (solid type ) white 91 Supplying fitting and fixing C.I or P or S trap comforming to I.S 3989/1970 and 1729/1964 including painting the exposed surface.P trap (100 mm dia) 92 Supplying, fitting fixing soap holder.c.(a) PTMT(Prayag or equivalent) 93 Supplying fitting and fixing 10 litres porcelain low down crysteen of approved make with either side or bottom inlet,sideoverflow, brackets complete with all internal PVC fittings. 94 Supplying fitting and fixing porcelain toilet paper holder of approved make and size.Roll type size ( 175mm x 150mm) 95 Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass (i) 25 mm dia. and 450 mm long 96 Supplying fitting fixing best quality Indian make mirror 5.5 mm thick with Silvering as per ISI specification supported on fibre glass frame of any colour, frame size 550 mmx400mm 97 Supplying fitting and fixing in position C.I manhole/ pit cover with rim.(b) Square = (i) 450 mm X 450 mm X 16 kg (approx.) 98 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 99 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Lengthb) 110 mm 100 fittingsplain teeb) 110 mm 101 Bend 45 degreeb) 110 mm 102 xi) Door Bend (T.S.) b) 110 mm 103 xvi) Pipe Clipb) 110 mm 104 xv) Vent Cowlb) 110 mm 105 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.Work above groundb) 110 mm 106 Construction of inspection pit (inside measurement 600mmx600mmx 450mm depth) as per drawing with 250mm thick brick work in cement morter (4:1) bottom of the pit consisting of 10mm thick cement concrete (1:3:6) over brick flat soling, providing channel or invert with cement concrete (1:2:4) top of the pit covered with 100mm thick RCC slab (1:2:4) and reinforcement upto 1%) having one manhole cover of approved Quality with necessary fittings, plastering with sand and cement morter (4:1) 12mm thick On entire internal surface and exposed external surface of wall, 20mm thick bottom Of pit 6mm thick on internal and external surface of the RCC slab neat cement finishing On all plastered surfaces, including earthwork in excavation and fitting the sides of the pit With earth complete in all respects with all materials and labour900x 750 x600 mm 107 Construction of Septic tankas per approved drawing and specifications including supplying fitting and fixing necessary specials and fittings such as S.W. Tees, C.I. foot rests, 560mm dia. R.C.C. manhole covers of approver quality including necessary earth work in excavation in all sorts of soils including bailing out water, and shoring etc. as necessary and refilling the sides of the tank with clear filling up the chambers with clear water after removing all foreign materials from inside the chambers and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. complete in all respects with all materials and labours( approved water proofing compound shall have to be plastering all internal surfaces of the tankB) With Bazree (N.B Varity) (Other than SAIL/TATA/RINL). 10 User 108 Construction of circular soak well 2.50mtr. deep with dry brickwork 2.10mtr.from the bottom end and brickwork in cement mortar (4:1) in top 1.50m with 20mm cement mortar plaster (4:1) inside including filling up the inside pit 1.00metre from bottom and 30 cm thick annular space all round the full depth of the pit upto dry brick work with brick metal of sizes 5cm to 15cm (bigger size placed at of the pit covered with 10cm thick R.C.C. slab (4:2:1) with necessary reinforcements and shuttering including 6mm thick (4:1)a)With 250 mm dry brickwork and 250mm thick cement brickwork(6:1). and 1.00m inside dia2.5mm deep 109 Ordinary Bat delivered and stacked at sith 110 Stone ballast 40 mm down of N.B variety delivered and stacked at site 111 Meditation Centre: Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.a) Depth exceeding 1.50m 112 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 113 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 114 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 115 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 116 Cost of Boulder 150 mm size delivered and stacked at site 117 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety 118 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 119 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 120 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 121 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site. a) In road and jhora work 122 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 123 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 124 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) conencted to one another with bracket gusset cleats as per design, direction of Engineer-in-charge complete ihncluding cuting to requisite size fabrication with necessary metal are welding conforming to IS 816-1956 & IS 9595 using electrodes of apporved make and brand conforming to IS 814-1957 haulage, hoisting and erection all complete.The rate includes the cost of rolled steel section, confumables such as the cost of gas and hirea charges of all tools and plants and labour required for the works incouding all incidental charges such as electricity charges labour insurance charges etc. i) For trusses spanning u p to 12.00 mSquare tube 50x50x4.5 mm th = 5.95 kg/m 125 125mm thick brick work with 1st class bricks in cement morter (4:1) in groundfloor. 126 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 127 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement moter, 15 mm thick 128 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 129 Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.). Ground Floor - Sal : Local 130 Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping]In Ground Floor 131 Wood work in door and window frames fine dressed fitted and fixed in position complete including a protective coat of painting at the contact surface of the framef) sissu, gammar, champ 132 Panel shutters with both side raised panels of doors and windows as per design (each panel consisting of a single plank without joint), including fitting and fixing the same in position but excluding the cost of hinges and other fittings. (f) sissu, gammar, champ 133 M.S. clamps for fixing doors & windows framesmade of flatbent bar, end bifurcated, fixedin cement concrete with stone chips (4:2:1) fitted & fixed complete as per direction.b) 40mmx6mm above 250 mm 134 Iron butt hinge of approved quality fitted and fixed with steel screws with I S I mark100 mm x 75 mm x 3.5 mm 135 Anodised aluminium Aldrop/ Sliding of approved quality manufactured from extruded section conforming to I.S: specificatiion (I.S. 2681/66) fitted and fixed complete.(i) 250mm x 16mm dia 136 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated (iv)150mm long x 10 mm dia rod 137 Anodized aluminium D type handleof approved quality manufactured from extruded section confirming the I.S.230/72fitted & fixed complete. 150mm grip x 12 mm dia rod 138 P.V.C- False Ceiling :Providing False Ceiling made with framework of steel tube of 40mm x 20mm of not less than 18 gauge,the long and cross section will be welded with each other 1000mm to 1200mm apart the entire framework will be fixed in wall using rawlplug or gutties or screws etc. and suspended from ceiling with M.S flat 19mmx3mm as necessary,the entire frame will be painted with red oxide. PRINTED LAMINATED P.V.C Section 150mm x 12mmx 1.00mm (+/- 0.01mm) of approved quality and colour will be fixed on the frame so that the entire framework will not be visible from below P.V.C Section will be fixed with the frame with the help of self tapping steel screws including all materials and labour charges including fitting,fixing the same and hoisting including mending the damages in all respect and cost of paint as required as per direction of Engineer-in- Charge .In ground floor. 139 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge.For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M]3 Track W 140 Labour charge for fabricating and installation of composite door window, partition made from annodised extruded alloy sections for the following units: (A)Glazed aluminium windows ,made of extruded and anodised alloy aluminium sectn fabrications ,including cutting to proper shape and size , drilling and alinging of window and shutter frame fitted with a built locking arrangements, sliding rollers and other necessary fittngs, fixture, adhesives and joineries along with neooprene or EPDM gasketing inbetween window frame and masonry work( walls columns window, lintels etc) as well as between stars and shutters frame and fixing glass & Polysulphate Sealant and inbetween shutter and window frame where necessary including cutting to requisite size and fixing the glass as per drawing, specification and direction of Engineer-in-Charge. The rate includes the hire charges of all tools and plants ,including all incidential charges , adhesive,joineries such as screws cleats angles etc. but excludes the cost of extruded aluminium sections, glass, neoprene/ EPDM gasketing, locking arrangements and rollers. 3 track sliding window 141 Supplying bubble free float glass of approved make and brand. Confirming to IS 2835-1987. (ix) 5mm thick coloured/ tinted/ smoke glass . 142 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground flooR Grills above 10 kg/m2 to 16 kg/m2 143 Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).a) With i)IN ROOF0.5 mm thick sheet 144 Galvonised iron sheet ridging fitted with necessary bolt, screws, washers etd complete (225 mm end lapping).450 mm laping each way 145 Supplying, fitting & fixing polycarbonate sheet of approved make & brand conforming to IS: 14443-1997 and having 50 micron UV protection layer under co-extrusion technology, Fire rating being B-s1 as per EN13501-1 certification, fitted and fixed with 60mm wide aluminium channel section top and bottom member in dry-glaze sandwitch system, (unit wt. of top and bottom members: 0.375 kg/m & 0.69 kg/m) of approved brand and profile, EPDM quality rubber gaskets, anti dust tape, end closer C channel and 75 mm long Self tapping screw being drilled through the centre leg of the bottom section with nuts placed at 300 mm apart without anyway puncturing the polycarbonate sheet, EPDM Washer 16 mm dia & 3 mm thick washer etc complete strictly as per manufacturers specification and direction of Engineer-in- Charge. (Payment to be made on area of finished work) .In Roof:- Natural/ Blue/Green/Bronze/Opal/Metallic grey colour. c)With 2 wall 10 mm overall thickness (wt.1.70kg/sqm,Ugvalue being 3.1 W/m2K, Min. cold bending radius of 1200 mm) 146 Galvonised iron sheet eaves gutter fitted and fixed with necessary 50 mm x 6mm M.S flat bar clamps bent to design, bolt , nuts, washers etc complete eaves gutter made of 0.63 mm thick. (b) 300 mm. wide gutter 147 Wooden eaves board as per design fitted and fixed complete.(iii) Ornamental eaves board (Badam/Gamar/Champ/Hallak). a) 19 mm thick 148 Holding down bolt with nuts including 100x100x6mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as diredted.25 mm dia 149 Lime punning about 3 mm thick with stone lime and shell lime 150 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 151 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIc(b) Two Coats 152 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 153 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 154 Chopal varnish of approved quality including preparing surface(i) On new wood surfacev 155 Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials(Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:(ii) 100mm Dia 156 C) Bend 87.5 degree (ii) 110mm Dia 157 D) shoe:(ii) 110mm Dia 158 Hanuman Mandir :Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 159 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 160 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 161 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 162 Cost of Boulder 150 mm size delivered and stacked at site 163 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety.1:3:6 proportion 164 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes.ii ) River bazree (1:2:4) 165 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 166 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 167 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site. a) In road and jhora work 168 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 169 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 170 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) conencted to one another with bracket gusset cleats as per design, direction of Engineer-in-charge complete ihncluding cuting to requisite size fabrication with necessary metal are welding conforming to IS 816-1956 & IS 9595 using electrodes of apporved make and brand conforming to IS 814-1957 haulage, hoisting and erection all complete.The rate includes the cost of rolled steel section, confumables such as the cost of gas and hirea charges of all tools and plants and labour required for the works incouding all incidental charges such as electricity charges labour insurance charges etc. i) For trusses spanning u p to 12.00 mSquare tube 50x50x4.5 mm th = 5.95 kg/m 171 125mm thick brick work with 1st class bricks in cement morter (4:1) in groundfloor. 172 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 173 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement moter, 15 mm thick 174 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 175 Supplying, fitting and fixing Marble Slab/tile of 15mm to 18mm thickness in dado / wall in 15mm (avg.) cement morter(1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4kg/Sq.m at the back side of marble & pointing in cement morter (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of Engineer-In-Chargeincluding cost of materials, labours, scaffolding, staging, curing complete.With Chawk Dungri 176 Supplying and laying true to line and level 20 mm / 25 mm. thick precast roof tiles made of cement conc. with stone chips as per approved strength and density set in 25mm avg. thickcement morter(1:3) and filling up joint (3 mm wide) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg per Sq.m back of tiles and then settting close the precasttiles, finishing up the joints with slurry already laid and finally finishing the top surface including providing 150 mm. high skirting with the same tiles flushed with the insidesurface of parapet wall,finishing the mouth of rain water pipes, curving etc. as necessary complete as per direction of the Engineer-in-charge. (Levelling if necessary may be paidseparately). (a) For 20 mm. thick precast tiles (cement 14.6 kg/ Sq.m for underlayer) 177 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground flooR Grills above 10 kg/m2 to 16 kg/m2 178 Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) 179 Lime punning about 3 mm thick with stone lime and shell lime 180 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 181 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 182 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On Steel surface : 183 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On Steel surface : 184 Ticket Counter cum Guard Room:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 185 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 186 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 187 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. (a) Single brick flat soling (thickness 75 mm.) 188 Cost of Boulder 150 mm size delivered and stacked at site 189 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety(a) 1:3:6) 190 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:2:4) 191 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes.ii ) River bazree (1:1.5:3) 192 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 193 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site.a) In road and jhora work 194 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 195 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 196 125mm thick brick work with 1st class bricks in cement morter (4:1) in groundfloor. 197 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 198 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement moter, 15 mm thick 199 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 200 Supplying and laying true to line and level vitrified tiles of approved brand(size not less than 600mmx600mmx10mm thk) in floor, skirting etc. set in 20mm sand cement mortar(1:4) and 2mm thk cement slurry back side of tiles using cement @ 2.91kg/m2 or using polymerised adhesive(6mm thk layer applied directly over finished artificial stone floor/mosiac etc without any backing course) laid after application slurry using 1.75kg of cement per m2 below mortar only, joints grouted with admixture of white cemet and colouring pigment to match with colour of tiles/epoxy groutmaterials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete true to materials, labour and all other incidential charges complete true to manufacturers specification and direction of Engineer-In-Charge.(White cement, synthetic adhesive and grout materials to be supplied by the contractor)(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement moar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.(A) Deep Colour & White 201 Supplying and laying 20 mm thick designer chequered tile of any shade and of approved quality as per I.S 1237:1980 laid in pattern as directed in pavement, foothpath including necessary under lay 25 mm thick average cement moter (1:3) complete in all respct with all labour and material. 202 Wood work in door and window frames fine dressed fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame f) sissu, gammar, champ 203 Panel shutters with both side raised panels of doors and windows as per design (each panel consisting of a single plank without joint), including fitting and fixing the same in position but excluding the cost of hinges and other fittings. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. sissu, gammar, champ 204 M.S. clamps for fixing doors & windows framesmade of flatbent bar, end bifurcated, fixedin cement concrete with stone chips (4:2:1) fitted & fixed complete as per direction.b) 40mmx6mm above 250 mm 205 Iron butt hinge of approved quality fitted and fixed with steel screws with I S I mark100 mm x 75 mm x 3.5 mm 206 Anodised aluminium Aldrop/ Sliding of approved quality manufactured from extruded section conforming to I.S: specificatiion (I.S. 2681/66) fitted and fixed complete.(i) 250mm x 16mm dia 207 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated(iv)150mm long x 10 mm dia rod 208 Anodized aluminium D type handleof approved quality manufactured from extruded section confirming the I.S.230/72fitted & fixed complete. 150mm grip x 12 mm dia rod 209 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge.For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr. 210 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge.For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. an.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M]3 Track W 211 Labour charge for fabricating and installation of composite door window, partition made from annodised extruded alloy sections for the following units:-(A)Glazed aluminium windows ,made of extruded and anodised alloy aluminium sectn fabrications ,including cutting to proper shape and size , drilling and alinging of window and shutter frame fitted with a built locking arrangements, sliding rollers and other necessary fittngs, fixture, adhesives and joineries along with neooprene or EPDM gasketing inbetween window frame and masonry work( walls columns window, lintels etc) as well as between stars and shutters frame and fixing glass & Polysulphate Sealant and inbetween shutter and window frame where necessary including cutting to requisite size and fixing the glass as per drawing, specification and direction of Engineer-in-Charge. The rate includes the hire charges of all tools and plants ,including all incidential charges , adhesive,joineries such as screws cleats angles etc. but excludes the cost of extruded aluminium sections, glass, neoprene/ EPDM gasketing, locking arrangements and rollers. 3 track sliding window 212 Supplying bubble free float glass of approved make and brand. Confirming to IS 2835-1987. (ix) 5mm thick coloured/ tinted/ smoke glass . 213 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground flooRGrills above 10 kg/m2 to 16 kg/m2 214 Lime punning about 3 mm thick with stone lime and shell lime 215 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 216 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIc(b) Two Coats 217 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 218 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 219 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On timber or plastered surface : 220 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On Steel surface : 221 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On timber or plastered surface :a. iv. 2 coat any shad 222 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) OnSteel or Metal surface :a. iv. 2 coat any shad 223 Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials(Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:(ii) 100mm Dia 224 D) shoe:(ii) 110mm Dia 225 Toilet Block.( Gents & Ladies) Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. a) Depth exceeding 1.50m 226 E xcavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 227 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres. a) Depth exceeding 1.50m foundation filling 1/3 of ….. 228 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 229 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 230 Cost of Boulder 150 mm size delivered and stacked at site 231 (II) Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. Variety(a) 1:3:6) 232 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes.ii ) River bazree (1:2:4) 233 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 234 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 235 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site.a) In road and jhora work 236 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .25 to 30 mm thick shuttering 237 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 238 125mm thick brick work with 1st class bricks in cement morter (4:1) in groundfloor. 239 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface.with (4:1) cement motera) 20 mm thick 240 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface.with (4:1) cement moter, 15 mm thick 241 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 242 Supplying fitting and fixing 1st quality cremic tiles in wall and floors to match with the existing workmaterials(WALL)(b) Area of each tile above 0.09 Sq.m(i) Coloured or decorative 243 Supplying fitting and fixing 1st quality cremic tiles in wall and floors to match with the existing workmaterials(FLOOR)(b) Area of each tile above 0.09 Sq.m(i) Coloured or decorative 244 Wood work in door and window frames fine dressed fitted and fixed in position complete including a protective coat of painting at the contact surface of the framef) sissu, gammar, champ 245 Panel shutters with both side raised panels of doors and windows as per design (each panel consisting of a single plank without joint), including fitting and fixing the same in position but excluding the cost of hinges and other fittings. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. sissu, gammar, champ 246 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. 247 Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. 248 M.S. clamps for fixing doors & windows framesmade of flatbent bar, end bifurcated, fixedin cement concrete with stone chips (4:2:1) fitted & fixed complete as per direction.b) 40mmx6mm above 250 mm 249 Iron butt hinge of approved quality fitted and fixed with steel screws with I S I mark100 mm x 75 mm x 3.5 mm 250 Anodised aluminium Aldrop/ Sliding of approved quality manufactured from extruded section conforming to I.S: specificatiion (I.S. 2681/66) fitted and fixed complete. (i) 250mm x 16mm dia 251 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated(iv)150mm long x 10 mm dia rod 252 Anodized aluminium D type handleof approved quality manufactured from extruded section confirming the I.S.230/72fitted & fixed complete. 150mm grip x 12 mm dia rod 253 Supplying best Indian sheet glass panes set in putty (as per I.S specification) and fitted and fixed with teak wood beads and nails complete. (In all floors for internal wall & upto 6 m height for external wall). 4 MM THICK 254 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground flooRGrills above 10 kg/m2 to 16 kg/m2 255 Supplying fitting fixing steel windows and ventilators with or without integrated grills confirming to IS 1038 - 1975 and manufactured from rolled sections confirming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etcincluding hoisting in position, straightrning if rerquired, fixing lugs in cement concrete (1:2:4) with stone chips 20mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b) Openable steel windows as per IS sizes with side hung shutters bars with/without fixed type ventilators. 256 Lime punning about 3 mm thick with stone lime and shell lime 257 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 258 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIc(b) Two Coats 259 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 260 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 261 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. (a) On timber or plastered surface : 262 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. (a) On timber or plastered surface : 263 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On timber surface : 264 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. (a) On Steel surface : 265 Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials(Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:(ii) 100mm Dia 266 D) shoe:(ii) 110mm Dia 267 SANITARY & PLUMBING: Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)Work above ground.32 mm 268 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)15 mm (b) For CONCEALED wORK 269 Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63]A. 6 Kg / Sq.Cm. (Working Pressure) (Dia)75mm 270 Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63]A. 6 Kg / Sq.Cm. (Working Pressure) (Dia)25mm 271 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).32 mm 272 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).15 mm 273 Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.20 mm 274 (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).20 mm 275 (a) (i) Chromium plated Bib Cock short body 276 Supplying, fitting and fixing push cock of heavy quality and of approved make and brand.(a) Cast iron 15 MM 277 Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). 278 Supplying P.V.C. water storage tank of approved make quality with closed top with lidUPTO 1000 Ltr. 279 Wash basin wite vitrous china of approved make ( without fittings) supplied, fitted and fixed in position on 75 mm x 75mm x 75mm wood blocks and cast iron brackets including two coat of painting oa C. I bracket (i) 450 x 300mm size 280 Supplying fitting fixing EWC in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.With P Trap 281 Supplying fitting fixing Closet seat of approved make with lid and CP hinges , rubber buffer and brass screwscompletea) EWCiv) Bestolite (solid type ) white 282 Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding P or S trap (excluding cost of concrete for fixing).(ii) 530 mm X 410 mm 283 Supplying fitting and fixing C.I or P or S trap comforming to I.S 3989/1970 and 1729/1964 including painting the exposed surface.P trap (100 mm dia) 284 Supplying, fitting fixing soap holder.c.(a) PTMT(Prayag or equivalent) 285 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. 286 Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass (i) 25 mm dia. and 450 mm long 287 supplying fitting and fixing flat back urinaal ( half stall urinal ) in white vetreous china ware of approved make in position with brass screwson 75 mm x 75 mm x 75mm x wooden block complete(ii) 470 mm X 280 mm X 340 mm 288 Supplying fitting fixing best quality Indian make mirror 5.5 mm thick with Silvering as per ISI specification supported on fibre glass frame of any colour, frame size 550 mmx400mm 289 Supplying fitting and fixing in position C.I manhole/ pit cover with rim.(b) Square = (i) 450 mm X 450 mm X 16 kg (approx.) 290 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 291 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Lengthb) 110 mm 292 fittings plain teeb) 110 mm 293 Bend 45 degreeb) 110 mm 294 xi) Door Bend (T.S.) b) 110 mm 295 xvi) Pipe Clipb) 110 mm 296 xv) Vent Cowlb) 110 mm 297 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.Work above groundb) 110 mm 298 Construction of inspection pit (inside measurement 600mmx600mmx 450mm depth) as per drawing with 250mm thick brick work in cement morter (4:1) bottom of the pit consisting of 10mm thick cement concrete (1:3:6) over brick flat soling, providing channel or invert with cement concrete (1:2:4) top of the pit covered with 100mm thick RCC slab (1:2:4) and reinforcement upto 1%) having one manhole cover of approved Quality with necessary fittings, plastering with sand and cement morter (4:1) 12mm thick On entire internal surface and exposed external surface of wall, 20mm thick bottom Of pit 6mm thick on internal and external surface of the RCC slab neat cement finishing On all plastered surfaces, including earthwork in excavation and fitting the sides of the pit With earth complete in all respects with all materials and labour900x 750 x600 mm 299 Construction of Septic tankas per approved drawing and specifications including supplying fitting and fixing necessary specials and fittings such as S.W. Tees, C.I. foot rests, 560mm dia. R.C.C. manhole covers of approver quality including necessary earth work in excavation in all sorts of soils including bailing out water, and shoring etc. as necessary and refilling the sides of the tank with clear filling up the chambers with clear water after removing all foreign materials from inside the chambers and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. complete in all respects with all materials and labours( approved water proofing compound shall have to be plastering all internal surfaces of the tankB) With Bazree (N.B Varity) (Other than SAIL/TATA/RINL). 50 Users 300 Construction of circular soak well 2.50mtr. deep with dry brickwork 2.10mtr.from the bottom end and brickwork in cement mortar (4:1) in top 1.50m with 20mm cement mortar plaster (4:1) inside including filling up the inside pit 1.00metre from bottom and 30 cm thick annular space all round the full depth of the pit upto dry brick work with brick metal of sizes 5cm to 15cm (bigger size placed at of the pit covered with 10cm thick R.C.C. slab (4:2:1) with necessary reinforcements and shuttering including 6mm thick (4:1)a)With 250 mm dry brickwork and 250mm thick cement brickwork(6:1). and 1.00m inside dia 301 Ordinary Bat delivered and stacked at sith 302 Stone ballast 40 mm down of N.B variety delivered and stacked at site 303 (8)Gazeboo(5 Nos) Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 304 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres. a) Depth exceeding 1.50m foundation filling 1/3 of ….. 305 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 306 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 307 Cost of Boulder 150 mm size delivered and stacked at site 308 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety(a) 1:3:6) 309 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes.ii ) River bazree (1:2:4) 310 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes.ii ) River bazree (1:1.5:3) 311 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 312 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site. a) In road and jhora work 313 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 314 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 315 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 316 Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohrs hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N 317 Lime punning about 3 mm thick with stone lime and shell lime 318 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 319 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 320 (9)3 nos of gate and front drop point ) Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 321 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres. a) Depth exceeding 1.50m foundation filling 1/3 of ….. 322 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 323 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. (a) Single brick flat soling (thickness 75 mm.) 324 Cost of Boulder 150 mm size delivered and stacked at site 325 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety(a) 1:3:6) 326 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 327 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 328 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 329 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 330 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground floor.Grills above 16 kg/m2 331 80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge.Colour Decorative 332 Lime punning about 3 mm thick with stone lime and shell lime 333 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 334 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 335 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On Steel surface : 336 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. (a) On Steel surface : 337 (10)Road Cum Parking (L=300.0m, Width-6.0m)Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .a) Depth exceeding 1.50m 338 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 339 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 340 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 341 Cost of Boulder 150 mm size delivered and stacked at site 342 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 343 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site.a) In road and jhora work 344 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 345 (11)Water Reserve tank (13,000 lits) and water supply with HDPE pipe(L=450.0m):Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .a) Depth exceeding 1.50m 346 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 347 Cost of Boulder 150 mm size delivered and stacked at site 348 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety 349 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes . ii ) River bazree (1:1.5:3) 350 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. i) Tor/ mild steel ( other manufacture nat specified) 351 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site.a) In road and jhora work 352 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 353 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface.with (4:1) cement motera) 20 mm thick 354 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 355 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)Work above ground. 32 mm 356 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)Work above ground. 15 mm For CONCEALED work 357 Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63]A. 6 Kg / Sq.Cm. (Working Pressure) (Dia) 358 B. 10 Kg / Sq.Cm. (Working Pressure) (Dia)25 mm dia 359 Labour, fitting and fixing high density polythene pipe or P.V.C. pipe for above ground including cost of joining material paints etc fitting and fixing all necessary special cutting pipe making thread, cutting holes on wall or RCC floor where necessary and mending good all damages excluding the cost of masonary. Work above ground 360 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 80 mm dia 361 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 25mm dia 362 Hanuman Statue 363 Garden Chair 364 DUSTBIN 365 Glow Sign Board 366 Glow Sign Board… 367 Glow Sign Board
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
37.
Rural Development #10315409 Price Bid
Providing Supplying And Erecting For Different Material Machinery And Labour Services For 1 Year At Grampanchayat-Gorhekh-Haweli ( Gp Fund ) -2 Centering Oil 3 Plastic Cover Block 4 R.C.C.Jali 50Mm Thick 5 Plastizer ( Rheobuild ) 825 Rmt. 6 Concrete Spacer Block 15 Mm 7 Concrete Spacer Block 20 Mm 8 Concrete Spacer Block 25 Mm 9 Concrete Spacer Block 30 / 40 Mm 10 Anticorrrisive Primer Coat 11 Swaling Coat 12 Pvc Coated Gi Wire 13 Repairs To Cut Ends And Damages With Special Liquid Epoxy 14 Epoxy Paint 15 R.C.C.Jali 80Mm Thick 16 Bricks ( Red ) 17 Aac Block 600X200x100 Mm 18 Jointing Mortar 19 Fly Ash Bricks 20 Corner Stone 38*20*30Cm 21 Khandakies 22 Pin Header ( Standard Size ) 23 Hollow Blocks C.C.0.2*0.2*0.4M 24 Hollow Blocks C.C.0.1*0.2*0.4M 25 Hollow Block C C 0.30 X 0.20 X 0.15 26 Siporex Block 75X240x650 Mm 27 Gbp Build Fast Plus 28 Siporex Block 100X240x650 Mm 29 Siporex Block 200X240x650 Mm 30 Bitumen ( Compound ) 31 Brick Bats 32 Water Proof Compound I.S 33 Tar Felt B.H.I.S.I.3Mm Thick 34 Acrylic Polymer Modified Waterproofing Powder 35 Acrylic Polymer Modified Liquid 36 Fibre Glass Mesh 37 Bitumen 85 / 25 Grade 38 Bitumen 85 / 25 Grade Cold Primer 39 Grit ( Add Below 5.6 ) 40 Bitumen Felt 41 Polydee-Tp40 Primer 42 Polydee-Tp40 Primer 43 Polydee-Lm 44 Polydee-Lm 150Mm Width 45 Bituflex Cloesdcell Foam 30X30 Mm 46 Ag 10 Granules 47 Polydee-Mc 48 Polydee-41 Sealant And Polyseal 49 Polydee-11 50 Bitumen Pad 25Mm Thick 1.20 X 1.20 Mtr 51 Neeru / Sanala 52 White Putty ( Cement ) 53 Texture Material 54 Rough Shahabad 25 To 30Mm Thick 55 Rough Shahabad 40 To 45 Mm Thick 56 Polished Shahabad 25 To 30Mm Thick 57 Rough Shahabad 50 To 60Mm Thick 58 Polished Shahabad 40 To 50Mm Thick For Step 59 Polished Shahabad Machine Cut 25Mm Thick 60 Polished Shahabad For Step25mm Thick 61 Tandoor Polished 25Mm Thick ( Machine Cut ) 62 Tandoor Polished 25Mm Thick ( Hand Cut ) 63 Tandoor Polished For Steps25mm Thisk 64 Black Kadappa ( One Side Polish ) ( Machine Cut ) 25 Mm Thick 65 Black Kadappa ( One Side Polish ) ( Machine Cut ) 35Mm Thick 66 Both Sides Polished Kadappastone 25Mm Thick 67 Kota Stone ( Machine Cut ) Upto 25-30Mm Thick One Side Polished 68 Kota Stone ( Hand Cut ) Upto 25-30Mm Thick One Side Polished 69 Kota Stone For Step Polished ) Upto 25Mm Thick ( 1.2*0.3M ) 70 Ceramic Tiles 30*30Cm 71 Ceramic Antiskid Flooring Tiles 30 X 30 Cm 72 Ceramic Tiles For Dado 30 Cm X 30 Cm 73 Ceramic Tiles For Dado 30 X 45 Cm 74 Heavy Duty Interlocking Concrete Block 60Mm Thick Gray 300 Kg / Sq.Cm. 75 Heavy Duty Interlocking Concrete Block 60Mm Thick Coloured 300Kg / Sq.Cm 76 Heavy Duty Interlocking Concrete Block 80Mm Thick Gray 300Kg / Sq.Cm 77 Heavy Duty Interlocking Concrete Block 80Mm Thick Coloured 300Kg / Sq.Cm 78 Heavy Duty Interlocking Concrete Block 80Mm Thick Rubber Mould Glossy 400Kg / Sq.Cm 79 Heavy Duty Interlocking Concrete Block 40Mm Thick Colour 200 Kg / Sq.Cm 80 Telephone Black Granite 81 Green Marble 82 Vitrified Tiles Glossy Size 590 To 605 Mm* 590 To 605 Mm*8 To 10Mm 83 Vitrifiedmatt Finish - Size 590 To 605 Mm* 590 To 605 Mm *8 To 10Mm 84 Vitrified Rustic Matt Stone Finish Size 590 To 605Mm *590 To 605Mm*8 To 10Mm 85 Vertified Stone Effect Finish Size 590 To 605Mm* 590 To 605Mm * 8 To 10Mm 86 Calcet Powder 87 Black Oxide Powder 88 Fevi Matt Chemical 10 Kg Bag 89 Marble Chips 90 Heavy Duty Interlocking Concrete Block 60Mm Thick Rubber Mould Glossy 400Kg / Sq.Cm 91 Tremix Treatment 100 Mm Thick 92 Marble Mosaic Chequered Tiles ( Gray ) 93 Colour Cement 94 Heavy Duty Designer Come. Tile For Flooring 95 Heavy Duty Designer Come. Tile For Steps 96 Pvc Flooring 97 Ceramic Tiles For Dado 30 X 60 Cm 98 Marble ( Other Than White Makrana ) 99 Kota Stone ( Hand Cut ) Upto 45-55Mm Thick One Side Polished 100 Vitrifiedmatt Finish - Size 895 To 900 Mm* 895 To 900 Mm *10 To 12 Mm 101 Bees Wax 102 Coal Tar 103 Common Spirit 104 French Polish 105 Varnish 106 Malemaine Polish 107 C.C.T.W. Ballies 125 Mm Diameter 108 Oil Enamel Paint / Flat / Glossy Paint ( Ready Mix ) ( With I.S.I. Mark ) 109 Synthetic Paint ( Ready Mix ) 110 Catonic Emulsion Paint 111 White Oil Paint 100Ml Pack Tin 112 Red Oxide Paint 113 Cement Paint 114 Steel Primer 115 Primer For Plaster Surface 116 Putty 117 Boiled Linseed Oil 118 Linseed Oil Double Boiled 119 Terpentine 120 Wood Primer 121 Brush For Lettring 122 Brush For Road Marking 5Cm 123 Brush For Marking Road 8Cm 124 Brush For Road Marking 10Cm 125 Lustre Paint 126 Textured Synthetic Paint 127 White Lead Paint 128 Birla Wall Care Putty 129 Aluminium Paint 130 Plastic Emulsion Paint 131 Acraylic Emulsion Paint 132 Exterior Primer 133 Weather Shield Paint 134 Neel 135 Oil Bound Distemper 136 Red Powder / Geru 137 Saras 138 Scrapping Sand Paper Size ( 30 * 20Cm ) 139 Dry Distemper 140 Chunam / White Lime Powder 141 Paint Luster Paint 142 Roller Brush 143 Royale Luxury Emulsion Paint 144 Country Teak Wood 145 Ghana Teak Wood 146 Teak Wood Planks Above 2.5 M Length 147 Teak Wood Bidding 1 / 2 * 1 / 2 148 T.W.Balli 100 Mm Dia 149 Jungle Wood ( Non Teak ) Normal 150 Bamboo 25Mm Dia. ( 4.5 To 6M ) 151 Bamboo 50Mm Dia. 152 Bamboo Matting 1.2*1.8M 153 Ply Wood 12Mm Thick 154 Ply Wood 6Mm Thick 155 Mica Laminate As Per Isi 0.1 Mm Thick 156 Face Veneel Board 4 Mm Thick 157 Particle Board B.W.P.Phinol Bond 12Mm Thick 158 Particle Board B.W.P.Phinol Bond 19 Mm Thick 159 Formica 1.5 Mm Thick 160 Tower Bolt Brass Oxidised 10 Mm Dia Length 150 Mm 161 Ferical 162 Ply Wood 18Mm Thick Commercial 163 Teak Wood Battens 50 * 25Mm 164 Teak Wood Batten 25 Mm * 12 Mm 165 Veneer 3.5 To 4 Mm Thick 166 Alluminium Rod 25Mm Dia 167 A.C.Corrugated Sheet 6Mm Thick 168 A.C.Sheet Ridge 169 A.C.Sheet Plain 4Mm Thick 170 G.C.I. Sheet ( Corrugated ) 22 Bwg 171 G.C.I. Sheet ( Corrugated ) 24 Bwg 172 G.I. Sheet ( Plain ) 22 Bwg 173 G.I. Sheet ( Plain ) 24 Bwg 174 G.I.Washers 175 G.I. J Or L Hooks 6 Mm Dia. 176 Nails Iron All Size 177 Mangalore Tiles Class Aa 178 Mangalore Ridge / Hip Tiles 179 Mangalore Glass Tiles 180 Mangalore Pattern Cowl Ventilator 181 G.I. Pre Coated Trapezoidal 0.50 Mm Thick Roof Metalic Coloured Sheet 182 G.I. Pre Coated Ridge Sheet 183 Gypsum Powder 184 Aluminium Alloy Plate 2Mm Thick 185 Aluminium Sheeting Fixed With Encapsuled Lens Type Reflective Sheeting Including 2% Towards Lettering , Cost Of Angle Iron, Cost Of Drilling Holes , Nuts, Bolts Etc. And Signs As Applicable. 186 Plaster Of Paris 187 Decorative Board Of Fibrous Plaster Of Paris 12 To 15 Mm 188 Acoustic Board 12 Mm Thick 189 Gypsum Board 12.5 Mm Thick 190 Upvc 3 Layer Trapezoidal 2.00 Mm Sheet 191 Light Weight Calcium Silicate Tile Of Size 595 X 595 Mm Of Texture Spin Stone / Cosmos / Plain / Glode Fine Fissured. 192 Bioguard Board 16 Mm 193 Ultima Tile 194 Optra Tile 195 Proflex Sheet 1 Mm 196 Sky Light 2 Mm Thick 197 Hanger Rod 4Mm Thick 198 Level Adjustment Clip Size 85X30x0.8Mm 199 Dash Fastener 12.5Mm Dia 50Mm Long 200 Soffit Cleat 25Mmx35mmx1.60Mm 201 Wooden Screws With Plastic Rawl Plugs 35Mmx8mm 202 Light Weight Calcium Silicate Tiles Of Size 595X595mm Of Texture Spintone For Tegular Edge Ceiling 203 Plain Zinc Sheet 204 Upvc Ridge / Hip Tiles 205 Hanger Wire ( 2.68 Mm Dia ) , 1.82 M Long 206 Dune Edge Tiles 207 Fine Fissured Edge Tiles 208 Turbo Ventilator 24 209 Tarat 36 Width ( Gunny Cloth ) 210 Wire Glass 211 Fire Wood 212 Precoated Galvanised Steel Plain Sheet 213 Connecting Clip For Supports 214 Dry Wall Screws 25 Mm 215 Jointing Compound 216 Jointing Tape 217 Minaral Fibre Board 600 X 600 Mm 218 Perimeter Channel 80 X 8 Mm 219 Screws 1 12 220 Screws 1 / 2 221 Rawal Plug 222 Plain Zinc Sheet 0.50 Mm Thick 223 Aldrop 300*16Mm Chromium Plated 224 Aldrop Iron Oxidise 300*16Mm 225 Aldrop Stainless Steel 300*16Mm 226 Handle 125Mm M.S. Chromium Plated 227 Handle 150Mm Brass Chromium Plated ( Rounded Shape ) 228 Handle Alluminium 125 Mm 229 Iron Hinges Chromium Plated 125Mm 230 But Hinges Alluminium 125Mm 231 G.I.Screw 50Mm 232 G.I.Screw 25Mm 233 Stainless Steel Hinges - 125Mm 14 Gauge ( Heavy Duty ) 234 Tower Bolt Aluminium 10Mm Dia.Length 250Mm 235 Tower Bolt Aluminium 10Mm Dia.Length 200Mm 236 Tower Bolt M.S. Chromium Plated 10Mm Dia, Length 300Mm 237 Tower Bolt M.S. Chromium Plated 10Mm Dia, Length 200Mm 238 Cold Rolled Steel Hollow Section Door Frame 1829*610Mm 239 Aluminium Stay 25Cm 240 Aluminium Stay 30Cm 241 Jali Fly Proof 242 Jali Chicken Mesh 243 Jali Welded Mesh 25*25* 13 Guage 244 Jali Welded Mesh 25*25* 11 Guage 245 Jali Welded Mesh 50*25 13 Guage 246 Jali Welded Mesh 50*25 11 Guage 247 Hold Fast Iron 300*40*5Mm 248 Sliding Door Bolt Stainless Steel 12Mm Dia. 250Mm Length 249 Glass Plain 3Mm 250 Glass Plain 5Mm 251 Glass Obscured ( Bajara ) 5Mm 252 G.I. Nut Bolt 253 Housing Box To Rolling Shutter 254 Mechanical Gear For Rolling Shutter 255 Mortice Lock Superior 256 Solid Core Commercial Shutter 30Mm Thick Phenol Bonded With Face Veneer 3 Mm Thick Both Side 257 Iron Washer 12Mm To 16Mm 258 Aluminium Section 259 Nylon / Pvc Gasket 260 Alluminium Screw 32 X 6 Mm, 25 X 6 Mm 261 Concealed Locking Arrangement Of 100 Mm Length For Sliding Window 262 Alluminium Grill 7.50 Mm Thick 263 Hydraulic Floor Spring Heavy Duty ( 150 Kg Capacity ) Isi Mark 264 Iron Oxidized Sliding Door Bolt 200 Mm Length, 12 Mm Dia 265 Powder And Chemicals For Colour Anodizing Process Of Alluminium Sections 266 Lock For Sliding Shutter 267 All Bearing Roller 268 All Frame Rail Angle 269 Welding Electrodes 270 C.R.C. Sheet 271 Abstrone Butadyne Styrine ( Abs ) Door Shutter Including Transportation 272 Puff Insulation 35-40 Kg / Cumt. Density 273 Pvc Door Shutter 34 Mm Thick Factory Made Shutter 274 Frp Door Shutter 30 Mm Thick Factory Made Shutter 275 Frp Door Shutter 35 Mm Thick Factory Made Shutter 276 Bison Pannel 277 Pvc Factory Made Solid Panel Door Shutter With Stainless Steel Fixutres & Fastening 278 Pvc Factory Made Flush Door 30 Mm With Stainless Steel Fixutres & Fastening 279 Sliding Door Bolt Chromium Plated 250Mm 280 Acrylic Plain Sheet 3 Mm 281 Aldrop Stainless Steel 300*16Mm 282 Aldrop Stainless Steel 250*16 Mm 283 Handle 150Mm Stainless Steel ( Rounded Shape ) 284 Handle 200Mm Stainless Steel ( Rounded Shape ) 285 Stainless Steel Hinges - 100Mm 14 Gauge ( Heavy Duty ) 286 Stainless Steel Hinges - 125Mm 14 Gauge ( Heavy Duty ) 287 Housing Box To Rolling Shutter 288 Mechanical Gear For Rolling Shutter 289 Door Stopperstainless Steel 290 Tower Bolt Stainless Steel 200 Mm 291 Tower Bolt Stainless Steel 250 Mm 292 Sliding Door Bolt Stainless Steel 250 Mm 293 Handle Stainless Steel 100 Mm 294 Eye Hole Lens 295 Rolling Shutter 296 Ply Wood 297 Stainless Steel Hooks And Eyes 200 Mm 298 Steel Window 299 Powder Coating 300 Rubber Lining 301 Ply Wood 9 Mm Thick 302 Laminated Board Double 12Mm Thick 303 Alluminium Section Anodized 304 Handle Iron Oxidised 150 Mm 305 Hinges Iron Oxidised 100 Mm 306 T. W. Particle Board, Both Face Laminated 12 Mm 307 Battens T.W. 70 X 45 Mm 308 Nuts And Bolts 309 Plain Frp Sheet 22 B.W.G. 310 Tw Runner ( 6 X 3 ) 311 Alluminium Screw 312 F Patti 313 Teak Wood Planks Above 2.5M Length 314 Vision Panel 315 Solid Core Shutter 35 Mm Thick With Commercial Veneer Facing And Phenol Bonded 316 Oil Paint 317 Acrylic Plain Sheet 2 Mm Thick 318 Aluminium Sheet 24 B.W.G 319 Alluminium Section With Powder Coating 320 Concealed Lock 321 Mosquito Proof Nylone Net 322 Solid Core Commercial Shutter 30Mm Thick Phenol Bonded With Face Veneer 3 Mm Thick Both Side With Bidding Patty 323 G.I. Pipe 100Mm Dia. Medium Type 324 G.I. Pipe 100Mm Dia. Heavy Type 325 G.I. Pipe 15Mm Dia. Medium Type 326 G.I. Pipe 15Mm Dia. Heavy Type 327 G.I. Pipe 20Mm Dia. Medium Type 328 G.I. Pipe 20Mm Dia.Heavy Type 329 G.I. Pipe 25Mm Dia. Medium Type 330 G.I. Pipe 25Mm Dia. Heavy Type 331 G.I. Pipe 32Mm Dia. Medium Type 332 G.I. Pipe 32Mm Dia.Heavy Type 333 G.I. Pipe 40Mm Dia. Medium Type 334 G.I. Pipe 40Mm Dia. Heavy Type 335 G.I. Pipe 50Mm Dia. Medium Type 336 G.I. Pipe 50Mm Dia. Heavy Type 337 G.I. Pipe 65Mm Dia. Medium Type 338 G.I. Pipe 65Mm Dia. Heavy Type 339 G.I. Pipe 80Mm Dia. Medium Type 340 G.I. Pipe 80Mm Dia. Heavy Type 341 Pvc Nahani Trap 75 Mm 342 G.I.Clamps 100Mm To 150Mm 343 Pvc Nahani Trap 150 Mm 344 G.I.Clamps 12Mm To 32Mm 345 G.I.Clamps 40Mm To 80Mm 346 Anglo Indian W.C. Pan Colour 347 G.I.Fixtures 348 P.V.C. Cowl 100 Mm 349 G.I.Screws 30Mm 350 G.I.Screws 40Mm 351 G.I.Union 25Mm Dia. 352 Gully Trap Cover With Frame 353 Gun Metal Stop Tap With Crutch Wheel 20Mm 354 Gun Metal Stop Tap With Crutch Wheel 25Mm 355 Gun Metal Stop Tap With Crutch Wheel 15Mm 356 Gun Metal Stop Tap With Crutch Wheel 20Mm 357 C.I.Bend 75Mm Dia. 358 C.I.Bend 100Mm Dia. 359 C.I.Bip Tap 12Mm 360 C.I.Grating 150Mm Dia. 361 C.I.Grating 100Mm Dia. 362 C.I.Grating 75Mm Dia. 363 C.I.Brackets 364 C.I.Collers 100Mm Dia. 365 C.I.Copllers 75Mm Dia. 366 C.I.Cover 45*30 Cm With Frame 367 C.I.Cowl / Vent 100Mm Dia. 368 C.I.Cowl / Vent 150Mm Dia. 369 C.I.Cowl / Vent 75Mm Dia. 370 C.I.Hinged Cover With Frame 371 C.I.Man Hole Cover 50 Kg. 372 C.I.Man Hole Cover 75 Kg. 373 C.I.Man Hole Cover 100 Kg. 374 C.I.Man Hole Cover 175 Kg.Heavy ( 0.9*0.45M ) 375 C.I.Nahani Trap 100Mm Dia. ( 375Mm Long ) 376 C.I.Nahani Trap 75 To 80Mm Dia. ( 375Mm Long ) 377 C.I.100*75*300 Long Arm ( Wt. 6Kg ) Nahani Trap 378 C.I.Soil Pipe 100Mm Dia. 379 C.I.Soil Pipe 150Mm Dia. 380 C.I, Soil Pipe 75 To 80Mm Dia. 381 C.I.Shoe 75 Mm Dia. 382 C.I. Shoe 100 Mm Dia. 383 C.I.Shoe 150Mm 384 Ball Cock 15Mm Dia.P.V.C.Float 385 Ball Cock 25Mm Dia.P.V.C.Float 386 Ball Cock 40Mm Dia.P.V.C.Float 387 Ball Cock 50Mm Dia.P.V.C.Float 388 Bib Cock Stop Tap Brass Heavy 15Mm 389 Bib Cock Stop Tap Brass Heavy 20Mm 390 Bib Cockstop Tap Brass Heavy 25Mm 391 Bib Tap 12Mm Brass Medium 392 Colour Wash Hand Basin 55*40Cm 393 Colour Wash Hand Basin 63*45Cm 394 White Glazed Wash Basin 45*30Cm 395 White Glazed Wash Hand Basin 55*50Cm 396 P.V.C. Flexible Waste Pipe 32 Mm Dia 397 White Glazed Wash Hand Basin 63 X 45 Cm 398 Sink White Glazed 45*20*30Cm 399 Pedestal For Wash Basin ( Standard Size ) 400 C.C.Septic Tank 0.9M Dia. ( 2.5M Long ) 401 C.C.Septic Tank 1.20M Dia. ( 2.5M Long ) 402 C.I.Steps For Manhole 403 C.I.Cover With Frame ( Gully Trap ) 404 C.I.Plug Bend 150Mm Dia. 405 Clamp For G.I.Pipe 25Mm 406 Colour European Type W.C.Pan 407 European Type Glazed W.C.Pan 408 W.C.Pan Coloured Glazed 64Cm. ( Orissa ) 409 W.C.Pan White Glazed 58 Cm.Indian 410 W.C.Pan White Glazed 57.50 Cm ( Orissa ) 411 Fibre Flushing Tank For W.C. 412 Flushing Tank Automatic Urinal 10Ltr. C.I. 413 Flushing Tank Automatic Urinal 5Ltr. ( P.V.C. ) 414 Low Level Flush Pr. St. 10Ltr. 415 Flat Back Urinal 416 Stall Type Urinal 417 Lipped Type Urinal 418 Coloured Glazed Full Stall Urinal 419 Bleaching Powder 420 Potassium Permanganate 421 Nylon Brush 422 Duster 423 Plastic Bucket 424 Coir 425 Gunny Cloth 426 Kharata 427 Wheel Stop Tap Brass 15Mm 428 Wheel Stop Tap Brass 20Mm 429 Wheel Stop Tap Brass 25Mm 430 Socket Brass For 32Mm Tap 431 Socket Brass For 40Mm Tap 432 Socket Brass For 50Mm Tap 433 Socket Brass For 65Mm Tap 434 Socket For 100Mm Tap 435 Socket For 15Mm Tap 436 Socket For 20Mm Tap 437 Socket For 25Mm Tap 438 Socket For 32Mm Tap 439 Socket For 40Mm Tap 440 Socket For 50Mm Tap 441 Socket For 65Mm Tap 442 Socket For 80Mm Tap 443 Span Yarn 444 Strainer For 100Mm 445 Strainer For 40Mm 446 Strainer For 50Mm 447 Strainer For 80Mm 448 Strainer For 15Mm 449 Strainer For 20Mm 450 Strainer For 25Mm 451 Stone Ware Pipe 100Mm Dia. 452 Stone Ware Pipe 150Mm Dia. 453 Stone Ware Pipe 225Mm Dia. 454 Stone Ware Glazed Pipe Half Round 100Mm Dia. 455 Stop Tap Brass With Crunch Wheel 15Mm Dia. 456 Towel Rod With Clamps 16Mm Dia. 457 Mirror 40*50Cm. With Plastic Frame 458 Brass T Thimble Socket 32Mm Dia. 459 Brass Wheel Stop Tap 32Mm Dia. 460 Brass Wheel Stop Tap 40Mm Dia. 461 Brass Wheel Stop Tap 50Mm Dia. 462 Brass Wheel Stop Tap 65Mm Dia. 463 Brass Wheel Stop Tap 80Mm Dia. 464 Half Turn Flush Cock 25Mm Dia. 465 12Mm Flexible Inlet Pipe Connection 466 Bell Mouth Cover 100Mm Dia. 467 Box Chamber With Lock 0.6*0.45M 468 Brass Nozzle Pillar Tap 12Mm 469 Black Bakelite Seat To European Closer 470 Concussion Push Button Type Gun Metal Tap 15 To 25Mm Dia. 471 Coupling Cast Iron 100Mm Dia. 472 Coupling Cast Iron 80Mm Dia. 473 Chromium Plated 12Mm Dia.Bib Cock 474 C.I.Trap Grating 15*10 Cm 475 C.I.Y Junction 100Mm Dia. 476 C.I.Y Junction 150Mm Dia. 477 C.I.Y Junction 75Mm Dia. 478 Enameled Bend 40Mm Dia. 479 Ferrul For C.I.Pipr 100Mm 480 White Glazed Foot Rest Chequred 25*10 Cm 481 Half Round Earthware Pipe 100Mm ( 60Cm Long ) 482 Half Round Earthware Pipe 150Mm ( 60Cm Long ) 483 Jute Rope 484 Half Round Chaina Ware Pipe 100Mm ( 60Cm Long ) 485 Lead Pipe 32Mm Dia. 486 Mohagani Seat With Lid 487 Mosquito Proof Coupling 488 Non-Return Valve 15Mm For Water Meter 489 Non-Return Valve 25Mm For Water Meter 490 Non-Return Valve 20Mm For Water Meter 491 Piller Tap 12Mm Dia.Chromium Plated Heavy 492 P.Trap And Lead Pipe Upto 40Mm Dia. 493 Rubber Gasket ( 25, 28 And 20 Cm ) 494 Rubber Incertion 495 Rubberised Adhesive 496 Salt Glazed Stone Ware Gully Trap ( 150*150Mm ) 497 Self Project Tap Brass Chromium Plated 15Mm 498 Sewer Trap 499 Shower Rose Chromium Plated Brass 10Cm 500 P.V.C. Pipe 15Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 501 P.V.C. Pipe 20Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 502 P.V.C. Pipe 25Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 503 P.V.C. Pipe 32Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 504 P.V.C. Pipe 40Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 505 P.V.C. Pipe 50Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 506 P.V.C. Pipe 60Mm Dia.10Kg / Cm2 Pressure ( Class Iv ) 507 P.V.C. Pipe 75Mm Dia.4 Kg / Cm2 Pressure ( Class Ii ) 508 P.V.C. 75 Mm Soil Pipe 6 Kg / Cm2 Pressure 509 P.V.C. Pipe 90Mm Dia.4 Kg / Cm2 Pressure ( Class Ii ) 510 P.V.C.Pipe 110Mm Dia.4Kg / Cm2 Pressure ( Class Ii ) 511 P.V.C. 110 Mm Rain Water Pipe 6Kg / Cm2 Pressure 512 P.V.C. 110 Mm Soil Pipe 6 Kg / Cm2 Pressure 513 P.V.C.Pipe 140Mm Dia.4Kg / Cm2 Pressure ( Class Ii ) 514 P.V.C.Pipe 160Mm Dia.4Kg / Cm2 Pressure ( Class Ii ) 515 P.V.C.Pipe 160Mm Dia.Soil Pipe 516 P.V.C.Pipe 160Mm Dia. Rain Water Pipe 517 P.V.C.Socket 15Mm Dia. 518 P.V.C.Socket 20Mm Dia. 519 P.V.C.Socket 25Mm Dia. 520 P.V.C.Socket 32Mm Dia. 521 P.V.C.Socket 40Mm Dia. 522 P.V.C.Socket 50Mm Dia. 523 P.V.C.Socket 60Mm Dia. 524 P.V.C.Flushing Tank ( 12 Ltr. Capacity ) 525 Flush Valve 32Mm Dia. 526 Ferocret Tank 527 Stainless Steel Sink Of Size 600*510*200Mmof Nirali Or Equivalent Make 528 C.P.Pillar Cock Jaquar Make Continental ( Cat.No. Con-011 ) 529 C.P.Pillar Cock ( Isi ) Jaquar Make Continental 530 C.P.Pillar Cock Long Neck With Aerator Jaquar Make Continental ( Cat.No. Con- 021 ) 531 C.P.Bib Cock ( Isi ) Jaquar Make Continental ( Cat.No. Con-037 ) 532 C.P.Bib Cock Long Thread Jaquar Make Continental ( Cat.No. Con-039 ) 533 C.P.2-Way Bib Cock Jaquar Make Continental ( Cat.No. Con-041 ) 534 C.P.Bib Cock With Wall Flange Long Thread Jaquar Make Continental ( Cat.No. Con- 047 ) 535 C.P.Bib Cock With Nozzle Jaquar Make Continental ( Cat.No. Con-049 ) 536 C.P.Angular Stop Cockjaquar Make Continental ( Cat.No. Con-053 ) 537 C.P.Angular Stop Cock Long Thread Jaquar Make Continental ( Cat.No. Con-055 ) 538 C.P.Angular Stop Cock With Wall Flange Jaquar Make Continental ( Cat.No. Con- 059 ) 539 C.P.Central Hole Basin Mixer Without Popup Waste System With 450Mm Long Braided Hoses Jaquar Make Continental ( Cat.No. Con-167B ) 540 C.P.Wall Mixer With Telephone Shower Arragnementonly But Without Teltphone Shower Crutch Jaquar Make Continental ( Cat.No. Con-217 ) 541 C.P.Wall Mixer Non-Telephonic Shower Arrangement Jaquar Make Continental ( Cat.No. Con-219 ) 542 C.P.Wall Mixer ( Wall Mounted Model ) With Telephone Shower Arrangement Only And With Telephone Shower Crutch Jaquar Make Continental ( Cat.No. Con-267 ) 543 C.P.Wall Mixer With Provision For Overheadshower With 115Mm Long Bend Pipe And Wall Flange Jaquar Make Continental ( Cat.No. Con-273Upr ) 544 C.P.Sink Mixer With Swinging Casted Spout ( Wallmounted ) Jaquar Make Continental ( Cat.No. Con-309 ) 545 C.P.Sink Mixer Swinging Spout ( Table Mounted Model ) 450Mm Long Braided Hoses Jaquar Make Continental ( Cat.No. Con-309B ) 546 C.P.Sink Cock With Swinging Casted Spout Jaquar Make Continental ( Cat.No. Con- 347 ) 547 C.P.Sink Cock With Raised J Shaped Swinging Casted Spout ( Table Mounted ) Jaquar Make Continental ( Cat.No. Con- 359 ) 548 C.P.Shower Arm 190Mm Long Light Body With Wallflange Jaquar Make Continental ( Cat. No. Sha - 477 ) 549 C.P.Flush Cock With Wall Flange 25Mm With Plain Knob Jaquar Make Continental ( Cat.No. Flr 6081 ) 550 C.P.Towel Rail 24 Jaquar Make Continental ( Cat. No. Acn 1111N ) 551 C.P.Towel Ring Square Jaquar Make Continental ( Cat. No. Acn 1121N ) 552 C.P.Soap Dish Hooker Jaquar Make Continental ( Cat. No. Akb 35731 ) 553 C.P.Soap Dish ( Polyurethane ) Jaquar Make Continental ( Cat. No. Aqn 7733 ) 554 C.P.Toilet Paper Holder Jaquar Make Continental ( Cat. No. Aq 7751 ) 555 C.P.Toilet Rack 24With Lower Hanger Jaquar Make Continental ( Cat. No. Acn 1181N ) 556 C.P.Handshower ( Health Faucet ) 1M.Pvc Tube With Wall Hook Jaquar Make ( Cat. No. Ald 563 ) 557 C.P.Pillar Cock Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7011 ) 558 C.P.Bib Cock With Wall Flange Aqua Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt7037 ) 559 C.P.2-Way Bib Cock With Wall Flange Aqua Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7041 ) 560 C.P.Angular Stop Cock With Wall Flange Aqua Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7053 ) 561 C.P.Central Hole Basin Mixer With Regular Spout Without Popup Waste System With 450Mm Longbraided Hoses Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7167Bb ) 562 C.P.Central Hole Basin Mixer With Regular Spout With Popup Waste System With 450Mm Longbraided Hoses Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7169B ) 563 C.P.Central Hole Basin Mixer With Small Spout Without Popup Waste System With 450Mm Longbraided Hoses Jaquar Make QueenS Collection ( Quarter Turn Fitting ) ( Cat. No. Qqt 7171B ) 564 C.P.Wall Mixer ( Wall Mounted Model ) With Telephonic Shower Arrangement Only But Without Crutchjaquar Make QueenS Collection ( Quarter Turn Filling ) ( Cat. No. Qqt 7217 ) 565 C.P.Wall Mixer Non-Telephonic Shower System Jaquar Make QueenS Collection ( Quarter Turn Filling ) ( Cat. No. Qqt 7219 ) 566 C.P.Wall Mixer ( Wall Mounted Model ) With Telephonic Shower Arrangement Only And With Telephone Shower Crutch Jaquar Make QueenS Collection ( Quarter Turn Filling ) ( Cat. No. Qqt 7267 ) 567 Hydraulic Door Closer 568 Cpvc Pipe 15Mm Dia. 569 Cpvc Pipe 20Mm Dia. 570 Cpvc Pipe 25Mm Dia. 571 Cpvc Pipe 32Mm Dia. 572 Cpvc Pipe 40Mm Dia. 573 Cpvc Pipe 50Mm Dia. 574 Cpvc Coupling For 15Mm Dia. 575 Cpvc Coupling For 20Mm Dia. 576 Cpvc Coupling For 25Mm Dia. 577 Cpvc Coupling For 32Mm Dia. 578 Cpvc Coupling For 40Mm Dia. 579 Cpvc Coupling For 50Mm Dia. 580 Elbow 90 Degree For 15Mm Dia. 581 Elbow 90 Degree For 20Mm Dia. 582 Elbow 90 Degree For 25Mm Dia. 583 Elbow 90 Degree For 32Mm Dia. 584 Elbow 90 Degree For 40Mm Dia. 585 Elbow 90 Degree For 50Mm Dia. 586 Tee For 15Mm Dia. 587 Tee For 20Mm Dia. 588 Tee For 25Mm Dia. 589 Tee For 32Mm Dia. 590 Tee For 40Mm Dia. 591 Tee For 50Mm Dia. 592 End Cap For 15Mm Dia. 593 End Cap For 20Mm Dia. 594 End Cap For 25Mm Dia. 595 End Cap For 32Mm Dia. 596 End Cap For 40Mm Dia. 597 End Cap For 50Mm Dia. 598 Ball Cock For 15Mm Dia. 599 Ball Cock For 12Mm Dia. 600 Ball Cock For 25Mm Dia. 601 Ball Cock For 32Mm Dia. 602 Ball Cock For 40Mm Dia. 603 Araldite Adhesive 604 Ball Valves For 50Mm Dia. 605 Male Adapter ( Brass Threads ) For 15Mm Dia. 606 Male Adapter ( Brass Threads ) For 20Mm Dia. 607 Male Adapter ( Brass Threads ) For 25Mm Dia. 608 Male Adapter ( Brass Threads ) For 32Mm Dia. 609 Male Adapter ( Brass Threads ) For 40Mm Dia. 610 Male Adapter ( Brass Threads ) For 50Mm Dia. 611 Male Adapter ( Plastic Threads ) For 15Mm Dia. 612 Male Adapter ( Plastic Threads ) For 20Mm Dia. 613 Male Adapter ( Plastic Threads ) For 25Mm Dia. 614 Male Adapter ( Plastic Threads ) For 32Mm Dia. 615 Male Adapter ( Plastic Threads ) For 40Mm Dia. 616 Male Adapter ( Plastic Threads ) For 50Mm Dia. 617 Female Adapter ( Brass Threads ) For 15Mm Dia. 618 Female Adapter ( Brass Threads ) For 20Mm Dia. 619 Female Adapter ( Brass Threads ) For 25Mm Dia. 620 Female Adapter ( Brass Threads ) For 32Mm Dia. 621 Female Adapter ( Brass Threads ) For 40Mm Dia. 622 Female Adapter ( Brass Threads ) For 50Mm Dia. 623 Female Adapter ( Plastic Threads ) For 15Mm Dia. 624 Female Adapter ( Plastic Threads ) For 20Mm Dia. 625 Female Adapter ( Plastic Threads ) For 25Mm Dia. 626 Union For 15Mm Dia. 627 Union For 20Mm Dia. 628 Union For 25Mm Dia. 629 Union For 32Mm Dia. 630 Union For 40Mm Dia. 631 Union For 50Mm Dia. 632 Cross For 15Mm Dia. 633 Cross For 20Mm Dia. 634 Step Over Bend 15Mm Dia. 635 Step Over Bend 20Mm Dia. 636 Tee Holder For 15Mm Dia. 637 Tee Holder For 32Mm Dia. 638 End Plug Threaded For 15Mm Dia. 639 R.C.C.Chamber Cover With Frame 90Cm*45Cm Heavy Duty 225Kg 640 R.C.C.Chamber Cover With Frame 90Cm*45Cm Medium Duty 140Kg 641 R.C.C.Chamber Cover With Frame 60Cm*45Cm Heavy Duty 160Kg 642 R.C.C.Chamber Cover With Frame 60Cm*45Cm Medium Duty 100Kg 643 I.S.I.Ferrul Connection15mm Dia. 644 I.S.I.Ferrul Connection 20Mm Dia. 645 I.S.I.Ferrul Connection 25Mm Dia. 646 I.S.I.Ferrul Connection 32Mm Dia. 647 I.S.I.Ferrul Connection 40Mm Dia. 648 I.S.I.Ferrul Connection 50Mm Dia. 649 Water Meter 15 Mm Diameter 650 Water Meter 20 Mm Diameter 651 Water Meter 25 Mm Diameter 652 Water Meter 40 Mm Diameter 653 Water Meter 50 Mm Diameter 654 Water Meter 80 Mm Diameter 655 Water Meter 100 Mm Diameter 656 Non Return Valve 40 Mm Diameter 657 Non Return Valve 50 Mm Diameter 658 Non Return Valve 80 Mm Diameter 659 Non Return Valve 100 Mm Diameter 660 Colour Wash Hand Basin 0.45 X 0.30 661 White Glaze Earth Sink 0.6 X 0.2 X 0.45 662 Clamp For G.I.Pipe 200Mm 663 Earopean Type Glazed W.C.Pan 68Cm 664 Earopean White Glazed Earthen Ware Closet Pan 665 P.V.C. Nahni Trap 666 P.V.C. Connector. 15 Mm Dia 667 Low Level Flushing Cistern 668 Upvc Sanitary Pipes All 20 Mm Dia. 669 Upvc Sanitary Pipes All 75 Mm Dia. 670 Bib Cock Stop Tap Brass Heavy 15Mm 671 Stainless Steel Sink Of Size 610 X 460 X 200 Mm Of Nirali Or Equivalent Make 672 Upvc Sanitary Pipes All 63 Mm Dia. 673 W.C.Pan Colour Glazed 57.50 Cm ( Orissa ) 674 Piller Cock Mixer & Angle Cock 675 Upvc Sanitary Pipes All 25 Mm Dia. 676 Upvc Sanitary Pipes All 15 Mm Dia. 677 Cement 678 Upvc Sanitary Pipes All 40 Mm Dia. 679 Upvc Sanitary Pipes All 50 Mm Dia. 680 Stainless Steel Sink Of Size 470 X 420 X 178 Mm Of Nirali Or Equivalent Make 681 Bib Cock Long Arm 682 Bottletrap Wash Basin 32 Mm Cromium Plated 683 Upvc Sanitary Pipes All 32 Mm Dia. 684 Hamp Rope 685 Bib Cock Cock Stop Tap Brass Heavy 15 Mm 686 Colour Wash Hand Basin 45*30Cm 687 Ultra 250 Mm. Dia. Upvc 90 Degree Junction Chamber Base With U Trap 688 Ultra 250 Mm.Dia. Upvccover & Frame 689 Upvc Blanking Plug 110 Mm 690 Upvc 90 Degree Bend 691 Ultra Shaft 250X470mm 692 Water Jet With Accessories 693 White Glazed Full Stall Urinal 694 Glass Plain 6Mm Thick 695 White Glazed Earthenware Squatting Plate ( Ladies Urinal ) 696 Autoclosing Pillar Cock Of Pressmatic Tap 697 Pvc Aqua Kraft Type Super Bib Tap 15 Mm 698 Pvc Aqua Kraft Type Super Two Way Bib Tap 15 Mm 699 Super Push Button Type Cock / Tap With Flange 15 Mm 700 Pvc Aqua Kraft Type Super Jet Spray 15 Mm 701 Pvc Aqua Kraft Type Super Right Angle Stop Tap 702 Pvc Aqua Kraft Type Super Pillar Tap 15 Mm 703 Fixing In Cc Bk Clamp, Battan 704 Wall Mounted European Type Glazed W.C.Pan 705 Super Wall Sink Type Tap With Flange 15 Mm 706 Two Way Bib Tap With Flange 707 Super Jet Spray With Flange 2 In 1 Faucet 1.50 Metre Long 708 Chloryphyriphos 709 Solvent 710 D.D.V.P. 711 Malathion 712 Pine Oil 713 S.S. Pipe 40 Mm Dia 714 Mild Steel 715 Barbed Wire 716 Concentina Coil Wire 717 M.S.Steel 718 Rcc Pole 719 Green Marble 720 Telephone Black Granite 721 Karva ( For Roof And Sides 10Kg Bundle ) 722 Tatti 723 Bamboo 25Mm Dia. 724 Lightening Conductor 725 Salt 726 Copper Tape Width 25Mm*3Mm Thick 727 Aluminium Strips 50 Mm X 3 Mm 728 Cripped Wire3 - 0 , 4 - 0 And 5 - 0 Wide 729 Welding Electrodes 730 Welded Mesh 75 X 75 Mm 731 Welded Mesh 150 X 150 Mm 732 Tarat 36 Width ( Gunny Cloth ) 733 Chain Link3 - 0 , 4 - 0 And 5 - 0 Wide 734 Bamboo 50Mm Dia. 735 Hold Fast For Steel Gate 736 Nut Boldts 12 Mm Dia. / Nails All Size 737 M.S. Pipe 40 Mm Dia 738 Welding Rod 739 Pvc Hand Rail Cover 740 Antitermite Liquid 741 Lock For Drawer / Cupboard 742 Glycel 743 Hing 744 Hot Lime 745 Ladder 746 Fine Tooth Chisel 747 Saw 748 Gloves 749 R.C.C.Pipe 1200Mm Dia. ( Np3 ) 2.5M Long 750 R.C.C.Pipe 1100Mm Dia. ( Np3 ) 2.5M Long 751 R.C.C.Pipe 1000Mm Dia. ( Np3 ) 2.5M Long 752 R.C.C.Pipe 900Mm Dia. ( Np3 ) 2.5M Long 753 R.C.C.Pipe 800Mm Dia. ( Np3 ) 2.5M Long 754 R.C.C.Pipe 700Mm Dia. ( Np3 ) 2.5M Long 755 R.C.C.Pipe 600Mm Dia. ( Np3 ) 2.5M Long 756 R.C.C.Pipe 500Mm Dia. ( Np3 ) 2.5M Long 757 R.C.C.Pipe 450Mm Dia. ( Np3 ) 2.5M Long 758 R.C.C.Pipe Np2 Class 1000Mm Dia. 2.5M Long 759 R.C.C.Np2 Pipe Collar 1000 Mm Dia. 760 R.C.C.Pipe Np2 Class 1200Mm Dia. 2.5M Long 761 R.C.C.Np2 Pipe Collar 1200 Mm Dia. 762 R.C.C.Pipe Np2 Class 1800Mm Dia. 2.5M Long 763 R.C.C.Pipe Np2 Class 900Mm Dia. 2.5M Long 764 R.C.C.Np2 Pipe Collar 900 Mm Dia. 765 R.C.C.Pipe Np2 Class 800Mm Dia. 2.5M Long 766 R.C.C.Np2 Pipe Collar 800 Mm Dia. 767 R.C.C.Pipe Np2 Class 700Mm Dia. 2.5M Long 768 R.C.C.Pipe Np2 Class 600Mm Dia. 2.5M Long 769 R.C.C.Np2 Pipe Collar 600 Mm Dia. 770 R.C.C.Pipe Np2 Class 500Mm Dia. 2.5M Long 771 R.C.C.Pipe Np2 Class 450Mm Dia. 2.5M Long 772 R.C.C.Np2 Pipe Collar 450 Mm Dia. 773 R.C.C.Pipe Np2 Class 100Mm Dia. 2M Long 774 R.C.C.Pipe Np2 Class 150Mm Dia. 2M Long 775 R.C.C.Pipe Np2 Class 225Mm Dia. 2M Long 776 R.C.C.Pipe Np2 Class 300Mm Dia. 2M Long 777 Rcc Pipe Np 4 Heavy Duty Non Presure Pipe 1000 Mm Diameter 778 Rcc Pipe Np4 Heavy Duty Non Presure Pipe 1200 Mm Diameter 779 Rcc Pipe Np4 Heavy Duty Non Presure Pipe 900 Mm Diameter 780 Cement 781 Structural Steel 782 Tmt Fe - 500 783 Hcrm / Crs Reinforcement 784 Bitumen Vg 10 ( Bulk ) ( 80 / 100 ) 785 Bitumen Vg 30 ( Bulk ) ( 60 / 70 ) 786 Bitumen Vg 40 ( Bulk ) ( 30 / 40 ) 787 Bitumen Vg 30 ( Packed ) ( 60 / 70 ) 788 Bitumen Vg 40 ( Packed ) ( 30 / 40 ) 789 Bitumen Vg 10 ( Packed ) ( 80 / 100 ) 790 Sand - Natural / V.S.I. ( Vertical Shaft Impact Crusher ) Quality Artifitial Sand 791 Sand - Crushed 792 Natural Sand - Screened ( For Plaster Work Only ) 793 Bricks Ii Class 794 Rubble Stone Excluding Royalty 795 Aggregate 40 Mm ( Hand Broken ) Blasted Excluding Royalty 796 Aggregate 25 Mm 797 Aggregate 20 Mm 798 Aggregate 12 Mm 799 Aggregate 10 Mm 800 Aggregate 6 Mm 801 Stone Dust 802 Soft Murum 803 Hard Murum 804 Water 805 White Cement 806 Plasticizer 807 Stainless Steel Plate 808 Emulsion Rs1 ( Hincol ) Bulk 809 Emulsion Rs1 ( Hincol ) Packed 810 Waste Plastic To Be Used In Bituminous Treatment As Per Irc Sp-098-2013 811 Portland Slag Cement ( Psc ) 812 Ground Granulated Blast Furnance Slag ( Ggbs ) 813 Bitumen Vg-40 ( Bulk ( 30-40 Grade ) ) 814 Stone Boulder Of Size 150 Mm And Below At Cruser Plant 815 Supply Of Quarried Stone 150 - 200 Mm Size For Hand Broken At Site 816 Boulder With Minimum Size Of 300 Mm For Pitching At Site 817 Coarse Sand At Mixing Plant 818 Coarse Sand At Site 819 Murum At Site 820 Fly Ash Conforming To Is: 3812 ( Part Ii &I ) Athmp Plant / Batching Plant / Crushing Plant 821 Filter Media / Filter Material As Per Table 300-3 ( Mort&H Specification ) 822 Close Graded Granular Sub-Base Material 53 Mm To 9.5 Mm 823 Close Graded Granular Sub-Base Material37.5 Mm To 9.5 Mm 824 Close Graded Granular Sub-Base Material26.5 Mm To 9.5 Mm 825 Close Graded Granular Sub-Base Material9.5 Mm To 4.75 Mm 826 Close Graded Granular Sub-Base Material9.5 Mm To 2.36 Mm 827 Close Graded Granular Sub-Base Material 4.75Mm To 2.36 Mm 828 Close Graded Granular Sub-Base Material 4.75Mm To 75 Micron Mm 829 Close Graded Granular Sub-Base Material2.36 Mm 830 Stone Crusher Dust Finer Than 3Mm With Not More Than 10% Passing 0.075 Sieve. 831 Coarse Graded Granular Sub-Base Material2.36 Mm & Below 832 Coarse Graded Granular Sub-Base Material4.75Mm To 75 Micron Mm 833 Coarse Graded Granular Sub-Base Material4.75 Mm To 2.36 Mm 834 Coarse Graded Granular Sub-Base Material 9.5 Mm To 4.75 Mm 835 Coarse Graded Granular Sub-Base Material 26.5 Mm To 4.75 Mm 836 Coarse Graded Granular Sub-Base Material 26.5 Mm To 9.5 Mm 837 Coarse Graded Granular Sub-Base Material 37.5 Mm To 9.5 Mm 838 Coarse Graded Granular Sub-Base Material 53 Mm To 26 .5Mm 839 Aggregates Below 5.6 Mm 840 Aggregates 22.4 Mm To 2.36 Mm 841 Aggregates 22.4 Mm To 5.6 Mm 842 Aggregates 45 Mm To 2.8 Mm 843 Aggregates 45 Mm To 22.4 Mm 844 Aggregates 53 Mm To 2.8 Mm 845 Aggregates 53 Mm To 22.4 Mm 846 Aggregates 63 Mm To 2.8 Mm 847 Aggregates 63 Mm To 45 Mm 848 Aggregates 90 Mm To 45 Mm 849 Aggregates 10 Mm To 5 Mm 850 Aggregates 11.2 Mm To 0.09 Mm 851 Aggregates 13.2 Mm To 0.09 Mm 852 Aggregates 13.2 Mm To 5.6 Mm 853 Aggregates 13.2 Mm To 10 Mm 854 Aggregates 20 Mm To 10 Mm 855 Aggregates 25 Mm To 10 Mm 856 Aggregates 19 Mm To 6 Mm 857 Aggregates 37.5 Mm To 19 Mm 858 Aggregates 37.5 Mm To 25 Mm 859 Aggregates 6 Mm Nominal Size 860 Aggregates 10 Mm Nominal Size 861 Aggregates 13.2 / 12.5 Mm Nominal Size 862 Aggregates 20 Mm Nominal Size 863 Aggregates 25 Mm Nominal Size 864 Aggregates 40 Mm Nominal Size 865 Binding Wire 866 Bitumen ( Cationic Emulsion ) 867 Bitumen Vg-30 ( Bulk ( 60-70 Grade ) ) 868 Bitumen Vg -10 ( Bulk ( 80-100 Grade ) ) 869 Bitumen ( Cutback ) 870 Bitumen ( Emulsion ) 871 Bitumen ( Modified Graded ) ( Bulk Cr-60 ) 872 Geo Grids 873 Geomembrane 874 Geonets 875 Geotextile 876 Geotextile Filter Fabric 877 Ldo 878 Pavement Marking Paint 879 Rcc Pipes 200 Mm Dia, 2.5 M Long For Drainage 880 Quarry Spall 881 Road Barricade Perforated Fench ( 2000 X 1000 X 40 Mm ) 882 Road Barricade Sand Fillable Only 1 Mtr. [ 1000 ( L ) X 350 ( W ) X 760 ( H ) Mm ] 883 Polypropylene Multifilament Woven Geotextile Fabric For Filter Layer ( Approved Opening Size 0.075Mm & Water Permeability 9.00 Litres / Sqm / Second ) 884 Polythene Bags 885 Trap Stones Weighing Upto 20 Kilogram 886 Trap Stones Weighing From 20 To 50 Kilogram 887 Trap Stones Weighing From 50 To 100 Kilogram 888 Trap Stones Weighing From 100 To 200 Kilogram 889 Trap Stones Weighing From 200 To 300 Kilogram 890 Trap Stones Weighing From 300 To 500 Kilogram 891 Trap Stones Weighing From 500 To 1000 Kilogram 892 Trap Stones Weighing From 1000 Kilogram And Above 893 Laterite Stones Rubbles Upto 20Kilogram 894 Laterite Stones Rubbles From 20 To 50 Kilogram 895 Laterite Stones Rubbles From 50 To 100 Kilogram 896 Gabions Boxes Of Mechanically Woven Hexagonal Shaped Wire Mesh Of Type, 10 Cm X 12 Cm. Edges Mechanically Selvedged ( Zinc+ Pvc ) Coated G.I. Wires As Per Bs: 443, Mesh Wire Dia. 3.00 Mm, Edge Wire 3.70 Mm Size 897 A ) Gabion Size - 1.00 X 1.00 X 1.00 M 898 B ) Gabion Size - 1.50 X 1.00 X 1.00 M 899 C ) Gabion Size - 2.00 X 1.00 X 1.00 M 900 D ) Gabion Size - 3.00 X 1.00 X 1.00 M 901 E ) Gabion Size - 4.00 X 1.00 X 1.00 M 902 Flexible Gabions Of Polypropylene Material Of 10 Mm Ø Four Strand Mesh Size Of 150Mm X 150 Mm Size 903 A ) Gabion Size - 1.00 X 1.00 X 1.00 M 904 B ) Gabion Size - 1.50 X 1.00 X 1.00 M 905 C ) Gabion Size - 2.00 X 1.00 X 1.00 M 906 D ) Gabion Size - 3.00 X 1.00 X 1.00 M 907 Used Tyre Fender 908 Geotextile Bags Of Sizes 909 A ) Geotextile Bags Size - 1.00 X 0.70 M 910 B ) Geotextile Bags Size - 2.00 X 1.50 M 911 Geotextile Tube Of 20 Metre Long & 912 A ) Geotextile Tube Diameter - 3.00 M 913 B ) Geotextile Tube Diameter - 1.50 M 914 Black Smith With Tools - Ii Class 915 Stone Cutter With Tools - Semi Skilled 916 Mason I Class Skilled 917 Mason Ii Class Skilled 918 Carpenter I Class Skilled 919 Carpenter Ii Class Skilled 920 Plumber With Tools - Skilled 921 Glazier With Tools - Skilled 922 Tin Smith With Tools - Semi Skilled 923 Painter I Class Skilled 924 Painter Ii Class Skilled 925 Head Fitter With Tools - Skilled 926 Mechanic 927 Lorry Driver / Mixer Operator 928 Welder / Driller - Skilled 929 Polishman - Semi Skilled 930 Assistant Plumber - Skilled 931 Maistry Skilled / Supervisor / Mate 932 Vibrator Operator - Skilled 933 Skilled Labour 934 Boreman Skilled 935 Asphalt Sprayer Skilled 936 Minor Or Blaster Semi Skilled 937 Quarry Man - Semi Skilled 938 Painter / White Washer - Semi Skilled 939 Labour For Excavation In Hard Rock ( Un Blast ) 940 Tile Turner Semi Skilled 941 Mazdoor - For Polishing 942 Bar Bender Skilled 943 Bhisti ( Mixing / Curing ) - Semi Skilled 944 Mukadam - Semi Skilled 945 Tar Handler - Semi Skilled 946 Helper Un Skilled 947 Tree Cutter - Semi Skilled 948 Navaghani 949 Mazdoor - Unskilled Heavy Male 950 Mazdoor - Unskilled Heavy Female 951 Below Boy 952 Fitter With Tools I Class Skilled 953 Fitter With Tools Ii Class Skilled 954 Gun Man For Guniting 955 Laboratory Assistant 956 Labour For Tile Turning 957 Excavator - Unskilled Heavy 958 Breaker - Semi Skilled 959 Hole Driller Semi Skilled 960 Chiseler Semi Skilled 961 Foreman Skilled 962 Bandhani Semi Skilled 963 Emgraver For Lettering Skilled 964 Frabi - Weld - Drilling 965 Khalashi / Diers 966 Jack Hammer Operator 967 Electrician 968 Welder Skilled 969 Labour For Traffic Regulation 970 Watchman 971 Compressor Operator / Driver 972 Supervisor / Mate 973 Blacksmith ( 1St Class ) Welder / Plumber / Electrician. 974 Blaster ( Stone Cutter ) 975 Mali 976 Mazdoor / Dresser ( Semi Skilled ) 977 Mazdoor / Dresser Sinker B116 Skilled 978 Medical Officer 979 Operator ( Grouting ) 980 Para Medical Personnel 981 Mazdoor Unskilled Female ( Light ) 982 Painting Lettering Number 983 Junior Engineer 984 Surveyor 985 Autocad Operator 986 Attendent 987 Computer Typist 988 Tracer 989 Total Station Operator 990 Senior Engineer 991 Assistant 992 Operator / Fitter 993 Mazdoor Unskilled Light Male 994 Computer Operator 995 Survey Helper 996 Technician 997 Skilled Assistants-On The Site 998 Supervisor 999 Valuation Expert 1000 Office Support Staff 1001 Co-Ordinator 1002 Senior Surveyor 1003 Revenue Expert 1004 Welder
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
38.
Public Administrative Department #10313278 Price Bid
Tender For Government Senior Secondary. Drinking water facility and other development work for students of class 1 to 8 in Sabnia School, Sabnia - 1 work detial 2 Earth work in foundation excavation up to 1.5m, ramming bottom, dressing sides,back filling and disposal of surplus soil with in a lead of 50m.In hard soil. 3 Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:4:8 mix 4 Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6 5 Brick work in super structure using bricks of class designation-75 in CM 1:6 6 S & F Stone lintels 7 P & L First class stone slab roof in CM 1:4 8 P & L brick bats on roof 9 S & F mosaic tiles on roof 10 20mm thick plaster on new work including curing and racking of joints in CM 1:6 11 S & F Glaze tiles on wall 12 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete (PWD BSR-2022 - Less-10%) 13 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofingcement paint) -(PWD BSR -2022 Less- 10%) 14 Wall painting with plastic emulsion paint of required shade including all scaffolding.New work ( Two or more coatincuding base coat of water proofing cement paint) -(PWD BSR-2022 Les-10%) 15 S & F iron door 16 Enamel painting on door and window 17 Wiring for fan/light point in PVC condutpipe as per specification 18 Wiring for light/Power point in PVC condutpipe as per specification 19 Wiring for circuit/submain as perspecification- 2x1.5Sqmm 20 S & F Water cooler 21 S & F Wate Filter 22 S & F Electric motor pump 23 S & F PVC water storage tank 24 S & F Bib cock 25 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(Internal work Exposed on wall) ( PWD20mm nominal size 26 S & F Full way valve-20mm 27 Earth work in foundation excavation up to 1.5m, ramming bottom, dressing sides,back filling and disposal of surplus soil with in a lead of 50m. 28 Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:4:8 mix 29 Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6 30 DPC - Reinforced cement concrete workincluding curing compaction, finishing withrendering in cement sand mortar 1:3 andmaking good and joints excluding cost ofcentering, shuttering and reinforcement in1:1.5:3 (1cement: 1.5course sand: 3-graded stone aggregate 20mm nominalsize) 31 Brick work in super structure using bricks of class designation-75 in CM 1:6 32 Reinforced cement concrete workincluding curing compaction, finishing withrendering in cement sand mortar 1:3 andmaking good and joints excluding cost ofcentering, shuttering and reinforcement in1:1.5:3 (1cement: 1.5course sand: 3-graded stone aggregate 20mm nominalsize) 33 Providing and fabricating reinforcementfor RCC work including straightening,cutting, bending, placing in position andbinding (including cost of binding wire) infoundation and super structure up to 4.5mheight above plinth level hot rolleddeformed (IS: 1139) cold twisted (IS:1786) bars 34 Centering and shuttering with plywood orsteel sheets including strutting, propping,bracing both ways with wooden membersand removal of from work 35 S & F steel girder including cutting,hoisting and fixing in position 300x140 36 S & F stone sriwan in CM 1:6 37 P & L First class stone slab roof in CM 1:4 38 P & L brick bats on roof in CM 1:4 39 S & F Mosaic tiles on roof 40 20mm thick plaster on new work includingcuring and racking of joints in CM 1:6 41 Providing and applying white cementbased putty over plastered surface toprepare the surface even and smoothcomplete 42 Finishing walls with Acrylic Smoothexterior paint of required shade includingall scaffolding.New work ( Two or morecoat incuding base coat of water proofing cement paint) -PWD BSR -2022 - Less10% 43 Wall painting with plastic emulsion paint ofrequired shade including allscaffolding.New work ( Two or more coatincuding base coat of water proofingcement paint) -PWD BSR-2022 - Less10% 44 S & F iron door 45 Providing and fixing steel glazed doorswindows and ventilator shutters of standardrolled steel section (IS 1038-1983) joints mitredand welded with steel lugs 13x3mm, 10cm. longembedded in cement concrete block15x10x10cm. of 1:3:6 (1cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size) orwith wooden plugs and screws or rawl plugs andscrews with fixing clips or with bolts and nutsas required including providing and fixing of plainglass panes 4mm thick with cooper glazing clipsand special metal sash 4mm thick with cooperglazing clips and special metal sash putty ofapproved make or metal beading with screwscomplete including priming coat of approval steelprimer, excluding the cost of metal beading andother fitting except necessary hinges of pivots 46 S & F wire mesh on Section window 47 S & F Iron bars on Section window 48 Enamel painting on door and window 49 Earth work in filling with ordinary soil 50 Carriage of earth-lead One KM 51 Cement concrete in floor with stoneballast size 40mm including curing andcompaction etc in 1:6:12 mix 52 S & F Polished Kota stone flooring 53 Wiring for fan/light point in PVC condutpipe as per specification 54 Wiring for circuit/submain as perspecification- 2x1.5Sqmm 55 Yojna board & Contingency charges
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
39.
Public Administrative Department #10313276 Price Bid
Tender For Government Senior Secondary. Drinking water facility and other development work for students of class 1 to 8 in school Dhani Chipolai, Sabnia - 1 work detial 2 Earth work in foundation excavation up to 1.5m, ramming bottom, dressing sides,back filling and disposal of surplus soil with in a lead of 50m.In hard soil. 3 Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:4:8 mix 4 Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6 5 Brick work in super structure using bricks of class designation-75 in CM 1:6 6 S & F Stone lintels 7 P & L First class stone slab roof in CM 1:4 8 P & L brick bats on roof 9 S & F mosaic tiles on roof 10 20mm thick plaster on new work including curing and racking of joints in CM 1:6 11 S & F Glaze tiles on wall 12 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete (PWD BSR-2022 - Less-10%) 13 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofingcement paint) -(PWD BSR -2022 Less- 10%) 14 Wall painting with plastic emulsion paint of required shade including all scaffolding.New work ( Two or more coatincuding base coat of water proofing cement paint) -(PWD BSR-2022 Les-10%) 15 S & F iron door 16 Enamel painting on door and window 17 Wiring for fan/light point in PVC condutpipe as per specification 18 Wiring for light/Power point in PVC condutpipe as per specification 19 Wiring for circuit/submain as perspecification- 2x1.5Sqmm 20 S & F Water cooler 21 S & F Wate Filter 22 S & F Electric motor pump 23 S & F PVC water storage tank 24 S & F Bib cock 25 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVCplain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes& fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(Internal work Exposed on wall) ( PWD20mm nominal size 26 S & F Full way valve-20mm 27 Earth work in foundation excavation up to 1.5m, ramming bottom, dressing sides,back filling and disposal of surplus soil with in a lead of 50m. 28 Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:4:8 mix 29 Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6 30 DPC - Reinforced cement concrete workincluding curing compaction, finishing withrendering in cement sand mortar 1:3 andmaking good and joints excluding cost ofcentering, shuttering and reinforcement in1:1.5:3 (1cement: 1.5course sand: 3-graded stone aggregate 20mm nominalsize) 31 Brick work in super structure using bricks of class designation-75 in CM 1:6 32 Reinforced cement concrete workincluding curing compaction, finishing withrendering in cement sand mortar 1:3 andmaking good and joints excluding cost ofcentering, shuttering and reinforcement in1:1.5:3 (1cement: 1.5course sand: 3-graded stone aggregate 20mm nominalsize) 33 Providing and fabricating reinforcementfor RCC work including straightening,cutting, bending, placing in position andbinding (including cost of binding wire) infoundation and super structure up to 4.5mheight above plinth level hot rolleddeformed (IS: 1139) cold twisted (IS:1786) bars 34 Centering and shuttering with plywood orsteel sheets including strutting, propping,bracing both ways with wooden membersand removal of from work 35 S & F steel girder including cutting,hoisting and fixing in position 300x140 36 S & F stone sriwan in CM 1:6 37 P & L First class stone slab roof in CM 1:4 38 P & L brick bats on roof in CM 1:4 39 S & F Mosaic tiles on roof 40 20mm thick plaster on new work includingcuring and racking of joints in CM 1:6 41 Providing and applying white cementbased putty over plastered surface toprepare the surface even and smoothcomplete 42 Finishing walls with Acrylic Smoothexterior paint of required shade includingall scaffolding.New work ( Two or morecoat incuding base coat of water proofing cement paint) -PWD BSR -2022 - Less10% 43 Wall painting with plastic emulsion paint ofrequired shade including allscaffolding.New work ( Two or more coatincuding base coat of water proofingcement paint) -PWD BSR-2022 - Less10% 44 S & F iron door 45 Providing and fixing steel glazed doorswindows and ventilator shutters of standardrolled steel section (IS 1038-1983) joints mitredand welded with steel lugs 13x3mm, 10cm. longembedded in cement concrete block15x10x10cm. of 1:3:6 (1cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size) orwith wooden plugs and screws or rawl plugs andscrews with fixing clips or with bolts and nutsas required including providing and fixing of plainglass panes 4mm thick with cooper glazing clipsand special metal sash 4mm thick with cooperglazing clips and special metal sash putty ofapproved make or metal beading with screwscomplete including priming coat of approval steelprimer, excluding the cost of metal beading andother fitting except necessary hinges of pivots 46 S & F wire mesh on Section window 47 S & F Iron bars on Section window 48 Enamel painting on door and window 49 Earth work in filling with ordinary soil 50 Carriage of earth-lead One KM 51 Cement concrete in floor with stoneballast size 40mm including curing andcompaction etc in 1:6:12 mix 52 S & F Polished Kota stone flooring 53 Wiring for fan/light point in PVC condutpipe as per specification 54 Wiring for circuit/submain as perspecification- 2x1.5Sqmm 55 Yojna board & Contingency charges
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
40.
Public Administrative Department #10312573 Price Bid
Tender For Community Toilet Construction Scheme, Government Higher Secondary School, Malasar - Earth work in foundation excavation up to 1.5m, ramming bottom, dressing sides, back filling and disposal of surplus soil with in a lead of 50m. 2 Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:5:10 mix 3 Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6 4 Brick work in super structure using bricks of class designation-75 in CM 1:6 5 S & F Stone Lintels 6 P & L First class patti roofing as per specifiation 7 P & L Roofing brick bats 8 20mm thick plaster on new work including curing and racking of joints in CM 1:6 9 Wall painting with plastic emulsion paint of required shade including all scaffolding. New work (two or more coat including base coat of water proofing cement paint)- PWD BSR-2022 10 S & F Iron door 11 Enamel painting on door 12 Cement concrete in floor with stone ballast size 40mm including curing and compaction etc in 1:6:12 mix 13 S & F Glaze tiles on walls 14 S & F Kota stone rack 15 Add electric+water+sanitory fitting etc 16 Add for contigency, Yojna board and others
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
41.
Rural Development #10265790 Price Bid
Supply Of Material Construction , Water Supply And Electricals Annual Tenders Gram Panchayat Ambadi Supply Of Material Construction , Water Supply And Electricals Annual Tenders Gram Panchayat Ambadi , Supply Of Material Construction, Water Supply And Electricals Annual Tender Grampanchayat Wadegaon M. Tal Kuhi , Soft Murum With Royalty , Hard Murumwith Royalty , Bricks Red , Bricks White , Sandwith Royalty , Black Sandwith Royalty , 20Mm Metal , 10 Mm Metal , 40 Mm Metal , 80 Mm Metal , Dust , Steel 6 Mm , Steel 8 Mm , Steel 10Mm , Steel 12Mm , Steel 16 Mm , Steel 20 Mm , Cement 53 Gredi.S.I With Gst , J.C.B. , J.C.B. , Kota Stone , Floor Tiles , Glaze Tiles , Mixure Machine With Diesel , Vibratar , Road Roller , Cement Chair , Rcc Cement Pipe 300 Mm , Rcc Cement Pipe 450 Mm , Rcc Cement Pipe 600 Mm , Rcc Cement Pipe 900 Mm , Water Tanker 12000 Liter , Water Tanker 5000 Liter , Fabrication Work , Paving Block , Three Siter Cement Chair , Information Bord , Binding Tar , Door Frame Cement , Bituman ( Damber ) , Water Tank , Khile , Pvc Pipe 75 Mm ( 4Kg ) , Pvc Pipe 90 Mm ( 4Kg ) , Gi Pipe 80 Mm , Gi Pipe 110 Mm , Wall 65 Mm ( Sluice Wall ) , Wall 80 Mm ( Sluice Wall ) , Wall 50 Mm ( Sluice Wall ) , Coupler Pvc 75 Mm , Coupler Pvc 90 Mm , Coupler Pvc 110 Mm , Coupler Pvc 140 Mm , Maintainance Coupler 75 Mm , Maintaninace Coupler 90 Mm , Maintaninace Coupler 110 Mm , Solution Pvc , Gland Rassi , Mseal , Bleaching Powder With Isi Mark , Gi 1 / 2 , Gi 1 , P.V.C.Pipe 63 Mm 6Kg.Socket , P.V.C.Pipe 63 Mm 6Kg.Bend , P.V.C.Pipe 63 Mm 6Kg.Elbow , P.V.C.Pipe 63 Mm 6Kg.Tee , P.V.C.Pipe 75Mm 6Kg.Socket , P.V.C.Pipe 75Mm 6Kg.Bend , P.V.C.Pipe 75Mm 6Kg.Elbow , P.V.C.Pipe 75Mm 6Kg.Tee , P.V.C.Pipe 90 Mm 6Kg.Socket , P.V.C.Pipe 90 Mm 6Kg.Elbow , P.V.C.Pipe 90 Mm 6Kg.Tee , P.V.C.Pipe 90 Mm 6Kg.Bend , P.V.C.Pipe 110 Mm 6Kg.Socket , P.V.C.Pipe 110 Mm 6Kg.Elbow , P.V.C.Pipe 110 Mm 6Kg.Tee , P.V.C.Pipe 110 Mm 6Kg.Bend , P.V.C.Pipe 140 Mm 6Kg.Socket , P.V.C.Pipe 140 Mm 6Kg.Elbow , P.V.C.Pipe 140 Mm 6Kg.Tee , P.V.C.Pipe 140 Mm 6Kg.Bend , P.V.C.Pipe 160 Mm 6Kg.Socket , P.V.C.Pipe 160 Mm 6Kg.Elbow , P.V.C.Pipe 160 Mm 6Kg.Tee , P.V.C.Pipe 160 Mm 6Kg.Bend , Pump Submerssible 7.5 Hp Teksmo / Falkan , G.I.Pipe , 2 Isi , G.I.Pipe , 2½ Isi , G.I.Pipe 3 Inch Isi , G.I.Pipe 5 Inch Isi , G.I.Pipe 6 Inchisi , G.I.Pipe½, Socketisi , G.I.Pipe 1 Socketisi , G.I.Pipesocket 1½ Isi , G.I.Pipe , Socket 2 Isi , G.I.Pipe , Socket 2½ Isi , G.I.Pipesocket 3 Inch Isi , G.I.Pipe Socket5 Inch Isi , G.I.Pipe Socket 6 Inchisi , G.I.Pipe½, Elbowisi , G.I.Pipe 1 Elbowisi , G.I.Pipe Elbow1½ Isi , G.I.Pipe , Elbow 2 Isi , G.I.Pipe , Elbow 2½ Isi , G.I.Pipe Elbow3 Inch Isi , G.I.Pipeelbow 5 Inch Isi , G.I.Pipeelbow6 Inchisi , G.I.Pipe½, Bend Isi , G.I.Pipe 1 Bendisi , G.I.Pipe Bend1½ Isi , G.I.Pipe Bend 2 Isi , G.I.Pipe , Bend 2½ Isi , G.I.Pipe Bend 3 Inch Isi , G.I.Pipebend 5 Inch Isi , G.I.Pipebend6 Inchisi , G.I.Pipe½, Tee Isi , G.I.Pipe 1 Teeisi , G.I.Pipetee 1½ Isi , G.I.Pipe Tee 2 Isi , G.I.Pipe , Tee 2½ Isi , G.I.Pipe Tee 3 Inch Isi , G.I.Pipe Tee 5 Inch Isi , G.I.Pipe Tee 6 Inchisi , Cabale 2.5 Sq Met , G.I.Nipple - 3 , G.I.Nipple - 2.5 , G.I.Nipple - 2 , G.I.Nipple - 1 , G.I.Nipple - 1 / 2 , Elbo - 2.5 , Union - 2 , Union - 1 , Union - 1 / 2 , Tap , Ormad Cable 10 Mm , Ormad Cable 16 Mm , Ormad Cable 35 Mm , G.I.Nipple - 3 , G.I.Nipple - 2.5 , G.I.Nipple - 2 , G.I.Nipple - 1 , G.I.Nipple - 1 / 2 , Upvc 1 , Drilling Boor , Gate Valve - 90 Mm , Gate Valve - 110 Mm , Gate Valve - 140 Mm , Motar Pump Submurshible 50 Hp , Hand Pump Chaini.S.I. , Hand Pump Rod , Hand Pump Pipe , Motar Pump Rewinding 3 Hp , Motar Pump Rewinding 5 Hp , Motar Pump Rewinding 10 Hp , Motar Pump Rewinding15 Hp , Motar Pump Rewinding 20 Hp , Pvc Pipe 75 Mm 6 Kg Presure , Pvc Pipe 100 Mm 6Kg , Pvc Pipe 110 Mm 6 Kg Presure , Pvc Pipe 80 Mm 6Kg , Pvc Pipe 140 Mm , Pvc Pipe 90 Mm , Pvc 160 Mm , Pvc Pipe 100 Mm , Gi Pipe 80 Mm , Gi Pipe 60 Mm , Gi Pipe 110 Mm , Gi Pipe 100 Mm , Pvc Pipe 6Inch ( 6Kg ) , Pvc Pipe 4Inch ( 4Kg ) , Wall 90 Mm ( Shoes Wall ) , Wall 140 Mm , Wall 160 Mm , Wall 110Mm , Wall 75 Mm , Toti 1 / 2 Inch , Toti 3 / 4 Inch , Toti 1 Inch , Wall 1 / 2 Inch ( Brass Wal ) , Wall 3 / 4 Inch , Wall 1 Inch , Coupler Pvc 75 Mm , Coupler Pvc 90 Mm , Coupler Pvc 110 Mm , Coupler Pvc 140 Mm , Coupler Pvc 160 Mm , Maintainance Coupler 75 Mm , Maintaninace Coupler 90 Mm , Maintaninace Coupler 110 Mm , Maintaninace Coupler 160 Mm , Solution Pvc , Gland Rassi , Mseal , Air Wall 50Mm , Airwall 65 Mm , Air Wall 80 Mm , Flan Z 150 Mm , Flan Z 125 Mm , Flan Z 100 Mm , Flan Z 80 Mm , Flan Z 50 Mm , Pvc Pipe 1 / 2 Inch , Pvc Bend 1 / 2 Inch , Pvc Elbow1 / 2 Inch , Ferul 1 / 2 Inch , Ferul 1 / 3 Inch , Pvc Pipe 1 / 3Inch , Pvc Bend 1 / 3 Inch , Pvc Elbow 1 / 3 Icnh , Digital Water Meter , Starter Panel 7.5 Hp
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
42.
Rural Development #10261149 Price Bid
Supply Of Construction Material Supply At G.P. Bothali Supply Of Construction Material Supply At G.P. Bothali , Construction Items : , Soft Murum , Hard Murum , Bricks Red , Bricks Ask , Sand , 20Mm Metal , 30 Mm Metal , 40 Mm Metal , 80 Mm Metal , Dust , Steel 6 Mm , Steel 8 Mm , Steel 10Mm , Steel 12Mm , Steel 16 Mm , Cement 53 Gred I.S.I. , J.C.B. , Kota Stone , Floor Tiles , Glaze Tiles , Tiles Spartex , Pocland , Mixure Machine , Vibratar , Roller , Rcc Cement Pipe 300 Mm , Rcc Cement Pipe 450 Mm , Rcc Cement Pipe 600 Mm , Rcc Cement Pipe 900 Mm , Water Tanker 4000 Liter , Fabrication Work , Paving Block , Three Siter Cement Chair , Information Bord 3*2 Squ Ft , Binding Wire , Paint , Sliding Window Aluminium With Glass , Water Tank , Khile , Centring
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
Maharashtra View Result →
Maharashtra View Result →
45.
Rural Development #10244551 Price Bid
E Tender Notice No 06 / 2022-2023 Providing And Supply Material For Grampanchayat Releted Work ( Financial Year 2022-2023 ) At Vadnerbhairav Tal Chandwad Dist Nashik , Supply Material For Sand, Metal, Steel, Cement, Pipe, Asphalt, Dubber, Murum, Bricks, Pever Block. , Pvc Pipe 7 4Kg , Pvc Pipe 7 6Kg , Pvc Pipe 6 10Kg , Pvc Pipe 8 10Kg , Pvc Pipe 3 4Kg , Pvc Pipe 3 6Kg , Pvc Pipe 4 4Kg , Pvc Pipe 4 6Kg , Pvc Pipe 1.5 4Kg , Pvc Pipe 1 4Kg , Tees 4 10Kg , Tees 6 10Kg , Tees 7 10Kg , Tees 8 10Kg , Tees 6Kg 4 , Tees 6Kg 6 , Tees 6Kg 7 , Tees 6Kg 8 , Tees 3 4Kg , Tees 4 4Kg , Elbows 3 4Kg , Elbows 4 4Kg , Elbows10kg 4 , Elbows 10Kg 6 , Elbows 10Kg 7 , Elbows 10Kg 8 , Elbows 6Kg 4 , Elbows 6Kg 6 , Elbows 6Kg 7 , Elbows6kg 8 , Lickage Cupler 10 Kg 6X3 , Lickage Cupler 10 Kg 7X3 , Lickage Cupler 10 Kg 8X3 , Lickage Cupler 10 Kg 6X4 , Lickage Cupler 10 Kg 7X4 , Lickage Cupler 10 Kg 8X4 , Lickage Cupler 06 Kg 6X3 , Lickage Cupler 06 Kg 7X3 , Lickage Cupler 06 Kg 8X3 , Lickage Cupler 06 Kg 6X4 , Lickage Cupler 06 Kg 7X4 , Lickage Cupler 06 Kg 8X4 , Cupler 10 Kg 6X3 , Cupler 10 Kg 7X3 , Cupler 10 Kg 8X3 , Cupler 10 Kg 6X4 , Cupler 10 Kg 7X4 , Cupler 10 Kg 8X4 , Cupler 06 Kg 6X3 , Cupler 06 Kg 7X3 , Cupler 06 Kg 8X3 , Cupler 06 Kg 6X4 , Cupler 06 Kg 7X4 , Cupler 06 Kg 8X4 , Upvc 10Kg 6 , Upvc 10Kg 7 , Upvc 10Kg 8 , Upvc 06Kg 6 , Upvc 06Kg 7 , Upvc 06Kg 8 , Upvc 1 Inch , Upvc 1 / 1-2 ( ??? ??? ) , Upvc 2 Inch , Moter 32Hp , Jalpari 1 Hp , Jalpari 2 Hp , Jalpari 3 Hp , Jalpari 5 Hp , Cable 3 Phase 4 Core Aluminium , Cable 3 Phase 4 Core Copper , Gi Pipe 1 Inch , Gi Pipe 2 Inch , ????? ??????? ???? , Cement , Cement Door Frame , Farashi Shahabadi Polish , Toilet Pot , Glaze Tiles , Sintex Door , Pever Block , Steel 6Mm , Steel 8Mm , Steel10mm , Steel 12Mm , Steel 16Mm , Steel 20Mm , Steel 25Mm , Angle 2 , Gi Jali 2X2 , Fly Ash Bricks 6 Inch , Fly Ash Bricks 9 Inch , Square Pipe , Chain Link 8 No , Structaral Steel , ?????? ????? , Dustbin Steel , Led Light 30 Watt , Led Light 40 Watt , Led Light 50 Watt , Led Light 80 Watt , Led Light 100 Watt , Led Light 150 Watt , Led Light 200 Watt , Led Light 250 Watt , Led Light 300 Watt , Led Light 350 Watt , Neptune Vehicle Mounted Fogging Machine ( Single Barrel ) , Led Light 40 Watt , Led Light 50 Watt , Android Smart Tv 32 , Mediclor Bottle 100Ml. , Jcb Machine In Rent , ??? , ???? , ????? , ??? , Cement Pipe 350Mm , Cement Pipe 450Mm , Cement Pipe 600Mm , Cement Pipe 800Mm , Bricks , Paver Block Rubber Mould , Aac Block 8 / 8 / 24 , Aac Block 9 / 8 / 24 , Aac Block 6 / 8 / 24 , Aac Block 4 / 8 / 24 , Green Gym , Bench , Table , Lokhandi Rack , Chairs
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
46.
Rural Development #10240668 Price Bid
Providing Supply Material Financial Year For 2022-2023 For Grampanchayat Releted Work At Dudhkhede Tal Chandwad Dist Nashik , Supply Material For Grampanchayat Work , Cement , Cement Door Frame , Farashi Shahabadi Polish , Toilet Pot , Glaze Tiles , Sintex Door , Pever Block Rubber Mold , Steel 6Mm , Steel 8Mm , Steel10mm , Steel 12Mm , Steel 16Mm , Steel 20Mm , Steel 25Mm , Angle 2 , Gi Jali 2X2 , Gi Sheet , Structaral Steel , Cement Pipe 350Mm , Cement Pipe 450Mm , Cement Pipe 600Mm , Cement Pipe 800Mm , Aac Block 8 / 8 / 24 , Aac Block 9 / 8 / 24 , Aac Block 6 / 8 / 24 , Aac Block 4 / 8 / 24 , Pvc Pipe 2 Inch , Pvc Pipe 2.5 Inch , Pvc Pipe 3 Inch , Pvc Pipe 4 Inch , Pvc Pipe 6 Inch , Pvc Pipe 8 Inch , Pvc Nahani Trap , Pvc Bend
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
Maharashtra View Result →
Maharashtra View Result →
49.
Public Administrative Department #10215639 Price Bid
Tender For Procurement Of Construction Materials For Financial Year 2023-24 -- Cement O.P.C. 43, 53 Grade, Coarse Sand, Sand Sand, Pellet Briquette, R. B. C. Eat, 40 Mm Ballast, 20 Mm Ballast, 10 Mm Ballast, 6 M M Churi, Rebar All Size, Binding Wire, Hard Murom Delivery, Hard Murom Delivery With Spread, Stone Dust Supply, Stone Dust Supplied With Spread, Boulder Delivery, Boulder Delivery With Spread, Sand Gravel Supply, Sand Pellets With Spread, Red / Yellow / Mitti Collection With Spread, Aron With Tudai, Ghadai, Casting, Eyepaint, Plastic Paint, Turpentine, Oil Bound Distemper, White Cement, Lime, Indigo, Red Oxide, Centering Material ( On Rent ) , Iron Doors Windows / Grilles, Iron Angles, Pipes, Channels Etc., Gi Sheet, Color Coated Sheet, Floor 40 Mm, Kota Stone, Terrazzo Tiles, Vitrified Glaze Tiles, Red Stone, Ceramic Glaze Tiles, W. C. Sheet, Urinal Sheet, Pvc Cast Pipe 2 Dia 4 Kg Per Cm2 Pressure, Pvc Casta Pipe 3 Dia 4 Kg Per Cm2 Pressure, P V C Casta Pipe 4 Dia 4 Kg Per Cm2 Pressure, P V C Casta Pipe 6 Dia 4 Kg Per Cm2 Pressure, P V C Casta Pipe 8 Dia 4 Kg Per Cm2 Pressure 300 Mm Dia Rc Hum Pipe With Collar, 450 Mm Dia Rc Hum Pipe With Collar, 600 Mm Dia Rc Hum Pipe With Collar, 900 Mm Dia Rc Hum Pipe With Collar, Casing Pipe Iron 6 Dia G.I., Concealing Pipe Pvc Of 6 Dia. G.I., Dung Manure, Jcb Machine With Driver And Pol ( For Rent ) , Poklen Machine With Driver And Pol ( For Rent Tractor With Trolley ( On Rent ) , Tractor with trolley, including driver and POL (Rent), Tractor with driver and POL (on rent) , Supply tractor (on rent) ,Supply tractor, including my driver and POL (on rent) Water tanker 3000 liters (on rent) , Water Tanker 3000 liters with driver and POL (Kg ,Water Tanker 5000 liters (on rent) ,Water tanker 5000 liters with driver and POL (with dumper 12 cubic meters (on rent) , Dumper 12 Cubic Meter with Driver and POL (Rent) Dumper 16 Cubic Meter (Rent) , Dumper 16 Cubic Meter with Driver & POL (Rent) Road Roller Static with Driver & POL (Rent) ,Road Roller Dynamic with Driver & POL (Cr. , Mixer Machine with Driver and POL (on rent) Tiles Grinder (on rent) , Concrete block (8 x 8) Sawdust , pieces of brick, Aluminum door, window, shutter, flush door, barbed wire, black soil, checkered tiles, Chain link wire, Cement PPC, Water proofing chemical, glass section, aluminum section
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Madhya Pradesh View Result →
50.
Rural Development #10202071 Price Bid
Supply Of Material Required For A Exercise School Building Construction As Per The Requirement At G.P. Bothali Supply Of Material Required For A Exercise School Building Construction As Per The Requirement At G.P. Bothali , Construction Items : , Soft Murum , Hard Murum , Bricks Red , Bricks Ask , Sand , 20Mm Metal , 30 Mm Metal , 40 Mm Metal , 80 Mm Metal , Steel 6 Mm , Steel 8 Mm , Steel 10Mm , Steel 12Mm , Steel 16 Mm , Cement 53 Gred I.S.I. , Floor Tiles , Glaze Tiles , Tiles Spartex , Mixure Machine , Vibratar , Water Tanker 4000 Liter , Paving Block , Door Frame , Iron Window , Information Bord 3*2 Squ Ft , Binding Wire , Paint , Khile , Centring
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
TenderDetail
Loading tenders