View Bid Results For Generator Panel Tenders

We found 2749 Bid Results related to generator panel tenders. You can find Contractor details who won generator panel tenders along with contract details in Bid awards announcements section.

Indian Tenders
63
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
6
Live Opportunities Worldwide
Filters
Stage
2083
390
276
Tender Publishing Platform
696
2053
State / UT
36
469
356
223
178
154
153
140
90
87
79
78
74
67
66
62
61
57
56
51
47
31
30
22
20
16
15
12
12
9
9
8
6
4
3
3
1
Contract Value
850
656
980
246
Publish Date
9
3
0
0
0
Sector
31
564
437
328
275
200
95
85
81
78
76
74
56
55
53
53
38
35
27
26
19
17
13
12
10
9
8
8
6
6
3
1
Ownership
7
1223
661
466
346
37
9
6
Within keyword
Active filters:
Showing 1–50 of 2749 tenders matching your filters
1.
Public Administrative Department #11483470 AOC
E-Tender For Electrical Items For Election 2025-26 At Collector Office Chhatrapati Sambhajinagar-1 LED BULB / Halogen Light (1000 W) with fitting 2 flood lights (400 W) with fittings 3 PA System with UPS(Single Round) 4 PA System with UPS(Double Round) 5 PA System with UPS (Triple Round) 6 LED Tubelight (40 W) 7 bulbs (100 W) 8 ceiling fans 9 Pedestal Fan 10 computer points 11 Inverter bulb and tube light 20W 12 Main Switch Panel Board (with MCCB, ELCB, MCB, RCCB) 13 Service Wire, Aryangsah 14 Wire 4Sq. mm. 15 Wire 2.5Sq. mm. 16 Wire 2 Sq. mm. 17 Wire 1 Sq. mm. 18 Wire 10 Sq. mm. 19 Temporary Plug Board (6 A and 16 A Switch and Socket) 20 Cable XLPE Cable 4C x 6 Sq. mm. 21 Cable 4C x 10 Sq. mm. 22 Cable 4C x 16 Sq. mm. 23 Cable 3 1/2 x 25 Sq. mm. 24 Cable 3 1/2 x 50 Sq. mm. 25 Cable 3 1/2 x 70 Sq. mm. 26 mics (wireless) 27 vis jamming device 28 Generator (7.5 KVA) with fuel and driver 29 Generator (10 KVA) with fuel and driver 30 generators (15 KVA) with fuel and driver 31 Generator (25 KVA) with fuel and driver 32 Generator (30 KVA) with fuel and driver 33 Generator (62.5KVA) with fuel and driver 34 Generator (82.5 KVA) with fuel and driver 35 Generator (125 KVA) with fuel and driver 36 Air Conditioner 2.0 Ton(Split AC) 37 Tower AC 38 kular small 39 Desert Cooler 40 air circulator 41 tender holder rate The daily amount (rate) should be calculated by Babanihay along with all the expenses including labor, conveyance, technical manpower expenses etc. (The rates quoted above should include the charges of the direct laborer. No separate charges will be given for transportation. The rates quoted are inclusive of all taxes and GST.)
Contract Date: Jul 02, 2026 Contract Value : ₹ 1.00 Crore
Local Bodies No of Bidders 6
Maharashtra View Result →
2.
Drinking Water Supply and Sanitation #11482620 AOC
Tender for Operation Of Motor Pump, Control Panel, Starters, Generator And Mixing Of Water Clorination At Mamandur Head Works Pumping Station At Chengalpattu Municipality
Contract Date: Jul 03, 2026 Contract Value : ₹ 19.34 Lakh
Local Bodies No of Bidders 3
Tamil Nadu View Result →
3.
Drinking Water Supply and Sanitation #11482619 AOC
Tender for Operation Of Motor Pump, Control Panel, Starters, Generator And Mixing Of Water Clorination At Pazhaveli Head Works Pumping Station At Chengalpattu Municipality
Contract Date: Jul 03, 2026 Contract Value : ₹ 19.34 Lakh
Local Bodies No of Bidders 3
Tamil Nadu View Result →
Telangana View Result →
West Bengal View Result →
Kerala View Result →
7.
Educational and Research Institute #11463263 AOC
Providing Ug Cable From Transformer To Generator Panel And Electrical Accessories At Transformer And Generator At Rars, Palem.
Contract Date: Ref. Documents Contract Value : ₹ 1.21 Lakh
Government Departments No of Bidders 1
Telangana View Result →
8.
Power #11459140 Technical Bid
Tender For Supply Of Generator Protection Relay , Generator Protection Relay For Dg Sets: Type: Flush Mounted Type, Digital, Ctr 1600/5A, Ptr: (415/V3) / (110/V3), Voltage Operated Current With Following Features: 1. High Set Active/Reactive Reverse Power. 2. Earth Fault 3. Over Current & Earth Fault With High Set 4. Over Voltage & Under Voltage 5. Loss Of Excitation 6. Over Frequency & Under Frequency 7. Current Unbalance 8. Pt Fuse Failure 9. Breaker Failure Protection Model: Mg-30I Or P342 Or Equivalent, Auxiliary Voltage-24Vdc, Frequency: 50/60Hz. Panel Cutout Size: 113X142mm, Standard: Iec 60255, 61850, En/Iec 61000, En 50081, 50263, 50082, 55022 And Ieee C37 Along With Their Latest Amendments. Note: • Only Oem Or Their Authorized Dealers Should Be Allowed To Take Participation In The Bidding Process And Oem/Firm Supplying Relay Shall Also Provide Support And Service For At Least Next 10 Years. • Item To Be Supplied By Firm Should Be Equivalent To The Existing Generator Protection Relay I.E. Mg-301 Of Make L&T Installed At 880 Kva,415 Vac Dg Set Alternators,Dcrtpp,Yamuna Nagar. Photo Of Existing Generatorprotection Relay I.E. Mg-301 Of Make-L&T And 880Kva,415Vac Alternator Attached With This Indent.However,Firm May Depute Their Representative For Collecting Data,Dimensions Of Existing Relay At Dcrtpp,Yamuna Nagar. • For Carrying Out Technical Vetting,Bidders While Submitting Their Bids May Be Asked To Submit Technical Datasheets Of The Offered Items In The Format Attached With This Indent As Annexure-A.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Haryana View Result →
Telangana View Result →
10.
Public Administrative Department #11441629 Price Bid
Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Suri-I Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 5
West Bengal View Result →
Telangana View Result →
12.
Public Administrative Department #11437950 Technical Bid
Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Rajnagar Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
West Bengal View Result →
13.
Defence #11434265 AOC
Bids Are invited for Site Clearance And Earthwork Is 1200 , Kero Heater , Pcc Is456 , Rcc M20 Footing And Column And Slab , Reinforcement Steel Fe500 , Brickwork 230Mm Is1077 And Flooring Anti Skid , Internal Plaster 12Mm , Doors Flush And Windows Alluminum And Glass , Electrical Led And Wiring , Plumbing And Sanitary , Ceiling Gypsum Vip , Painting Exterior And Interior External Lighting And Poles , Water Supply Tank And Pump , Transportation And Logistics Remote Area , Contingencies And Solar Panel 5Kva And Invertor And Battery 5Kva , Generator 5 Kva Electrical Led And Wiring Is 732 , Mirror 5 H 2W Ft And Bench 5 H 2W Ft , Chair Plastic With Arm , Toilet Sheet Western With Exhaust Fan And Water Faucet And Hand Jet Assy , Electric Fitting Work , Changing Room 6 By 6 By 10 Ft And Bathroom 6 By 6 By 10 F , Multipurpose Hall Structure , Chair Vip Sofa And Centre Table , Podium And Tt Table And Carrom Set , Yoga Mats Fire Extinguisher , 86 Inch Interactive Pannel , Drainage And Cement Road Work Tin Shed Wk On Viewer Seating Iron Poles And Tin Sheet Hooks Screw And Iron Channel , Ground Civil Work , Excavation Work Total Quantity : 5823
Contract Date: Ref. Documents Contract Value : ₹ 19.97 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Ladakh View Result →
14.
Educational and Research Institute #11433319 AOC
Procurement Of Tools & Equipment For Newly Established Iti For Girls At Ghatkesar In Medchal Malkajgiri District-25.00 Cost Supply And Delivery Of Cpu: 32 / 64 Bit, 7Th Generation Or Higher, I3 Or Latest Processor, Speed: 3 Ghz Or Higher. Ram: 8 Gb Or Higher, 1Tb Hdd / Sdd, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( As Available In The Market ) . Or All In One Pc Licensed Operating System And Antivirus Compatible With Trade Related Software. Make: Dell. Cost Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of 4Th Gen Ci5 Or Higher Processor, 4Gb Ram, 1Tb Hard Disk, Win8 / Latest Preloaded Licensed Os, 2Gb Graphics Card, Dvd Writer, Standard Ports And Connectors.Make: Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of To Enable Working With Wired Networks For Practical. Make:Finolex. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Broadband Connection With Min. 2 Mbps Speed / Optical Fiber. Make:Optic Fiber. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Registered Domain At Least 100 Mb Web Space. Make: D Link.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of All In One Printer A4 Size. Make: Hp Laser Jet.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dlp Projector With Screen / Multimedia Projector With Screen / Smart Interactive Board / Smart Tv Latest Version. Make:Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Online Ups 5Kva. Make: Utl. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply, Delivery, Installation And Testing Of Open Office Or Equivalent Latest Version. Open Source Software : Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of Python / Java Jdk. Latest Version. Open Source Software : Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of Gimp Or Equivalent. Latest Version. Open Source Software: Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of E Commerce Simulation Software.Latest Version. Open Source Software: Windows. 1.00 Cost Supply, Delivery, Installation And Testing Http Web Server / Xampp Or Any Other Similar Server.Open Source Software: Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of My Sql. Latest Version. Open Source Software: Windows. 4.00 Cost Supply And Delivery Of Air Conditioner 2 Ton. Make: Blue Star.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost For Tools And Eqiupments Of Electronic Mechanic Trade: Cost Supply And Delivery Of Air Conditioner Two Ton Split Ac.Make:Blue Star. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Cro Dual Trace.20 Mhz ( Component Testing Facilities ) . Make: Htc / Varteck. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Battery Charger. 0 - 6 - 9 - 12 - 24 - 48 V, 30 Amp Make:Scientech. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Function Generator Dds Technology Sine Square Triangle Ramp Pulse Serial Data Ttl And Modulation. 1 Mhz -10 Mhz Function- Pulse – Modulation Generator With Built In 40Mhz Frequency Counter.Make:Pacific. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Digital Ic Tester. Dit-02 Make: Krb / Asi / Ssl Make. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Power Electronics Trainer With At Least 6 Numbers Of Application Board Mosfet Characteristics Scr Characteristicsscr Lamp Flasher Scr Alarm Circuit Series Inverter Single Phase Pwm Inverter.Electrical Type Make:Ohm. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 3.00 Cost Supply And Delivery Of Desktop Computers. Cpu: 64 Bit I7 8 Th Gen Processor, Speed: 3 Ghz Or Higher. Cache Memory: - Minimum 3 Mb Or Better. Ram:-8 Gb . Hard Disk Drive: 1 Tb 7200 Rpm ( Minimum ) Or Higher, Wi-Fi Enabled On Board Intigrated Wifi . Network Card:Integrated Gigabit Ethernet ( 10 / 100 / 1000 ) - Usb Mouse, Usb Keyboard And Monitor ( Min. 19.5 Inch ) , Standard Ports And Connectors. Dvd Writer, Speakers And Mic. Licensed Windows 10 Pro Operating System Antivirus / Total Security Preferably Hp / Dell / Lenova. Make:Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Laptop 8 Th Gen I7 Processor, 8Gb Ram, 1Tb Hard Disk, Windows 10 Pro Preloaded Licensed Os, 4Gb Graphics Card, Dvd Writer, Standard Ports And Connectors.Preferably Hp / Dell / Lenova Make:Hp / Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Laser Jet Printer A4 Size.Make:Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Internet Broad Band Connection 300Mbps.Make:Act / Bsnl / Jio. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Electronic Circuit Simulation Software With 6 User Licenses. Circuit Design And Simulation Software With Pcb Design With Gerber And G Code Generation, 3D View Of Pcb, Breadboard View, Fault Creation And Simulation..Make:Edwin. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dso Colour. 4 Channel , 50Mhz Real Time Sampling 1G Samples / Sec, 12 Mpts Memory With Pc Interface Usb, Lan And Math Function Includes +, -, Fft, Differential, Integral, Abs, Log Etc.Make:Aet. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Soldering & De Soldering Station.200 Watt Adjustable.Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Frequency Modulator And Demodulator Trainer Kit.Fm Modulator Type : Reactance Modulator, Varactor Modulator, Vco Based Modulator Fm Demodulator Type All 5 Demodulation Techniques Detailed Teaching And Learning Contents Through Software.Make:Ohm. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Pam Ppm Pwm Trainer Kit Pam - Ppm - Pwm Trainer Kit Is A Uses Natural And Flat Top Sampling Techniques For Modulation And Demodulation Process. Features: Pam-Ppm-Pwm M. Make:Ohm. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Am Fm Commercial Radio Receivers Tr105 Portable Radio Support Fm / Am / Sw / Cb / Vhf / Air Radio Make: Krb Make. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Application Kits For Microcontrollers 6 Different Applications One Set 1.Input Interface : 4X4 Matrix Keypad, Ascii Key Pad, Four Input Switch 2. Display Module 16X2 Lcd, Seven Segment, Led Bar Graph 3. Adc / Dac Module With Most Popular Dc / Dac0808 4. Pc Interface: Rs232 & Usb 5. Motor Drive: Dc, Servo, Stepper 6. Daq: Data Acquisition To Sense Different Sensors Signals. Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Sensor Trainer Kit Containing Following Sensors 1 Thermocouple 2 Rtd 3 Load Cell Strain Gauge 4 Lvdt 5 Smoke Detector Sensors 6 Speed Sensor 7 Limit Switch 8 Photo Sensors 9 Optocouplor 10 Proximity Sensor.Graphical Touch Lcd With Inbuilt Processor For Viewing The Output Waveforms, In Built Daq, And Standard Processing Circuits Like Inverting , Non – Inverting , Power, Current , Instrumentation Differential Amplifier, F / V, V / F, V / I, I / V Converter, Sensors :Rtd, Ntc Thermistor, Lm35 Thermocouple, Gas ( Smoke ) Sensor, Load Cell, Lvdt Sensor, Speed Sensor. Make:Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Different Types Of Electronic & Electrical Cables Connectors Sockets And Terminations 1Mm Sqmm Ti 4Mm Sqmm, 3Pin Socket, 5Pin Socket, Terminal Complet Set. Make:Phenolex. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Fiber Optic Communication Trainer Full Duplex Analog & Digital Trans-Receiver With 660Nm & 950Nm, Noise Generator With Variable Gain, Four Seven Segment Display Ber Counter, Eye Pattern Make:Pacific. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Mobile Phone Trainer. 2G / 3G / 4G Dual Sim Gsm Handset.Frequency Measurement And Band Verification. Real Time Mobile Operation Make:Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Smart Phones Of Different Make ( Android / Windows ) Android / Windows Make:Nokia / Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Lcd Tv ( Trainer Kit ) 21-Inch Full Hd Lcd Color Television Should Support Pal / Ntsc Video Formats Complete Block Diagram Of A Lcd Tv System, Study Board Indicating Various Sections Of Lcd Tv Along With The Test Points And Switch Faults. Make:Sony. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Lcd Tv ( 21 ) Full Hd Telivision. Make:Samsung / Sony. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Led Tv ( Trainer Kit ) 20-Inch Full Hd Led Color Television, Pal / Ntsc Video Formats, Complete Block Diagram Of A Led Tv System, Study Board Indicating Various Sections Of Led Tv Along With The Test Points And Switch Faults Trouble Shooting In Different Sections. Make:Sony. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Solar Training Kit / Simulator With Build In Meters For Dcv Dca Ac Multifunction Meter Frequency Protection Circuits Bs-10 Terminals For Making The Connection Single / Dual Axis Traking System Charge Controller Pwm Based Mppt Charging Stage Bulk Absorptions And Float Make:Trina / Vikram. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Led Lighting System Measurement Of Power, Voltage, Current, Power Factor And Light Output Performance Of Different Lighting Products Like Led, Cfl At Variable Input Voltages 0 To 245V Variable Ac Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Tools And Equipments Of Computer Aided Embroidery And Designing Nsqf: Cost Supply And Delivery Of Over Lock Machine.3 Thread. Make:Juki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Single Head Computerized Embroidery Machine ( Multi Needle ) With Ups Pr1055x. Make:Brother Pr1055x Entrepreneur Pro X Single Head 10 Needle Computer Embroidery Machine. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply, Delivery, Installation And Testing Of Coral Draw Software. 4.00 Cost Supply And Delivery Of Desktop Computer With Ups. Cpu: 32 / 64 Bit I3 / I5 / I7 Or Latestprocessor, Speed: 3 Ghz Or Higher. Ram:-4 Gb Ddr-Iii Or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( Min. 17 Inch Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Hp / Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Laptop 12Th Generation Inte Core I5 Prosses0r O S Windos 11 Ho 1920*1080 Intel Me 16 Gb Ram, 512 Gb Ssd Hard Drive 35.6 Cm 14 Diognal Fhd. Make:Hp / Dell With Ms Office And Inbuild Windows. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Multi-Functional A3 Size Colour Printer Latest With Trolley. Make: Canon. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Printer Laser Jet Pro M 202Dw. Make: Canon. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Scanner Hp / Dell. Make: Canon. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Automatic Sewing Machine ( With Necessary Attachments ( Zip Fixing, Plcot Gathering Foot Etc. ) ( With Necessary Attachments ( Zip Fixing, Plcot Gathering Foot Etc. ) Make: Zuki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 3.00 Cost Supply And Delivery Of Air Conditioner Of 2 Ton Capacity With Stabilizer. Make:Blue Star.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Computer Set With Ups &Multimedia Projector. Cpu: 32 / 64 Bit I3 / I5 / I7 Or Latestprocessor, Speed: 3 Ghz Or Higher. Ram:-4 Gb Ddr-Iii Or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( Min. 17 Inch Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Dell / Hp / Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Ac Unit Split Type. 2 Ton Capacity With Stabilizer. Make:Blue Star. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Ac Unit Split Type. 2 Ton Capacity With Stabilizer. Make:Blue Star. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost For Tools And Eqiupments Of Fashioon Design & Technology: Cost Supply And Delivery Of Dress Forms ( Dummies ) Children Ladies Gents ( Fibre ) . Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Computer Set With Ups & Multimedia Projector. Cpu: 32 / 64 Bit, 7Th Generation Or Higher, I3 Or Latest Processor, Speed: 3 Ghz Or Higher. Ram: 8 Gb Or Higher, 1Tb Hdd / Sdd, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( As Available In The Market ) . Or All In One Pc Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Dell / Hp / Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of White Magnetic Board With Felt Board & Accessories Of Size:17X23 ( Fibre With Wooden Frame ) . Make:Roger And Moris. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 25.00 Cost Supply And Delivery Of Sewing Machine - Single Needle Lock Stitch Industrial Model 3 Thread ( Electric Type ) . Make: Juki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Over Lock Machine 3 Thread ( Electrict Type ) . Make:Juki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 24.00 Cost Supply And Delivery Of It Lab With Computers Setup &Installation Along With Ups Required Configuration For Software ( Corel Draw ) Cpu: 32 / 64 Bit, 7Th Generation Or Higher, I3 Or Latest Processor, Speed: 3 Ghz Or Higher. Ram: 8 Gb Or Higher, 1Tb Hdd / Sdd, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( As Available In The Market ) . Or All In One Pc Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Dell / Hp. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply, Delivery, Installation And Testing Of Designing Software Coral Draw. Latest Version Make:Coral. 1.00 Cost Supply And Delivery Of Multi Functional A4 Colour Printer. Printer With Trolly / Table. Make:Hp Laser Jet. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Lcd Projector. Make:Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Vacuum Cleaner.Lab Cleaning ( Latest ) . Make:Euroclean Wd X2 Dry And Wet Vacuum Cleaner. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 List Of Tools And Equipment Of Electrician Trade: Cost Supply And Delivery Of Drill Hand Brace 0-100Mm ( Stainles Steel ) Make:Hudson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Load Bank ( Lamp / Heater Type ) .6 Kw, 3Ph Make:Kohir / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Electronic Components. Consisting Resistors, Diode, Transistor, Ujt, Fet, Scr, Diac, Traic, Igbt, Small. Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 3.00 Cost Supply And Delivery Of Bus Bar With Brackets.1 Mtr Each. Make:Siemens / L &T / Ge. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Rcc Pole With Accessories ( Ms Angle Iron, ‘C’ Clamp, Stay Insulator Etc. ) And Materials.6 Mtr Make:Superior. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Tachometer. Analog Type - 10000 Rpm Make: Metrix / Meco / System. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of G. Auto Transformer Type. Make:Krb / Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Oscilloscope Dual Trace 20 Mhz Make:V A R Tech Ss 5020 B Oscilloscope 20 Mhz Dual Channel Cro. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Oil Testing Kit 230 V, Single Phase 50 Hz 60 Va Output 0-60 Kv Variable. Make:Kiloskar / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Inverter With Battery 1 Kva With 12 V Battery, Input- 12 Volt Dc, Output- 220 Volt Ac Make:Luminous . Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Battery Charger 0 - 6 - 9 - 12 - 24 - 48 V, 30Amp. Make:Elektron . Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Solar Panel With Battery 18 Watt. Make:V-Guard / Exide. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of I5 And I7 Generation Computer Or Latest Version & Instalation 2.8 Ghz & Above, 8 Gb Ram, 500 Gb Hdd, Dvd Combo Drive, 19 / 21” Monitor, Optical Scroll Mouse, Multimedia Keyboard, 32 Bit Lan Card With Upp Port, Necessary Drivers, Etc. Or ( Latest Version ) . Make:Hp / Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ink Jet / Laser Printer. Laser Jet Pro M 202 Dw. Make:Hp / Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of D.C. Shunt Generator With Control Panel, ( With Installation ) .2.5 Kw, 220V &3Phase Squirrel Cage Induction Motor, 5Hp, 440V With Control Panel & Star Delta Starter. Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Motor-Generator ( Ac To Dc ) ( With Installation ) .Squirrel Cage Induction Motor With Star Delta Starter And Directly Coupled To Dc Shunt Generator And Switch Board Mounted With Regulator, Air Breaker, Ammeter, Voltmeter, Knife Blade Switches And Fuses, Set Complete With Case Iron And Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. Induction Motor Rating: 7.5 Hp, 415V, 50 Cycles, 3 Phases. Dc Shunt Generator Rating: 5 Kw, 440V ( Output Voltage Varies 110-440V ) Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of D.C. Compound Generator With Control Panel Including Fitted Rheostat, Voltmeter, Ammeter And Breaker, 2.5 Kw, 220V &3Phase Squirrel Cage Induction Motor, 5Hp, 440V, With Control Panel & Star Delta Starterr. Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dc Series Motor Coupled With Spring Balance Load With Instalation. 2.5 Kw, 220 Volts Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dc Shunt Motor 2.5 Kw, 220 V. Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dc Compound Motor With Starter And Switch ( With Installation ) .2.5 Kw , 220 Volts Make:Kbr / Crompton / Kiloskar. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Motor Generator ( Dc To Ac ) Set Consisting Of - Shunt Motor With Starting Compensator And Switch Directly Coupled To Ac Generator With Exciter And Switch Board Mounted With Regulator, Breaker, Ammeter, Voltmeter Frequency Meter, Knife Blade Switch And Fuses Etc. Set Complete With Cast Iron Bed Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. ( With Installation ) . Shunt Motor Rating: 5 Hp, 440V Ac Generator Rating : 3-Phase, 4 Wire, 3.5 Kva, 400 / 230 Volts, 0.8 Pf, 50Cycles Make:Kbr / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ac Squirrel Cage Motor With Star Delta Starter And Triple Pole Iron Clad Switch Fuse With Mechanical Load. ( With Installation ) 5 Hp, 3-Phase, 415 V, 50 Hz Make:Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ac Phase-Wound Slip Ring Motor With Starter Switch. 5 Hp, 440 V, 3 Phase, 50 Hz Make:Krb / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Universal Motor With Starter / Switch. 240 V, 50 Hz, 1 Hp Make:Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Synchronous Motor With Accessories Like Starter, Excitation Arrangements.3 Phase, 3 Hp, 440V, 50Hz, 4 Pole Make:Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Thyristor / Igbt Controlled D.C. Motor Drive With Tacho-Generator Feedback Arrangement ( With Installation ) 1 Hp. Make:Kbr / Havells / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Thyristor / Igbt Controlled A.C. Motor Drive With ( With Installation ) .Vvvf Control 3 Phase, 2 Hp Make:Kbr / Havells / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Three Phase Transformer, Shell Type Oil Cooled With Delta / Star. 3 Kva , 415 / 240 V, 50 Hz Make:Kbr / Havells / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Electrical Machine Trainer – Suitable For Demonstrating The Construction And Functioning Of Different Types Of Dc Machines And Ac Machines ( Single Phase And Three Phase ) . Should Be Fitted With Friction Brake Arrangement, Dynamo Meter, Instrument Panel And Power Supply Unit. Make:Kirlosker / Siemens / Havells / Benn / Energy Pack / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Diesel Generator Set With Changeover Switch, Over Current Breaker And Water / Air-Cooled With Armature, Star-Delta Connections Ac3 Phase, 7.5 Kva, 415 Volt Or Higher Rating Make:Bharath / Mahahendra. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Used Dc Generators-Series, Type For Overhauling Practice 5Kva. Make:Krb / Kirlosker. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Used Dc Generators- Shunt Type For Overhauling Practice 5Kva. Make:Krb / Kirlosker. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Used Dc Generators-Compound Type For Overhauling Practice 5Kva. Make:Krb / Kirlosker. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Pillar Electric Drill Machine Motorized. 12-20 Mm Capacity, 1Hp, 440V, 3 Phase, Induction Motor With Dol Starter, Bench Type. Make:Vimal / Glow. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Motorised Bench Grinder. 1 Hp. 3 Phase, 440V With Dol Starter, Double Side With Smooth And Rough Wheel With Tool Base Make:Bosch / Metro. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ceiling Fan Coil Winding Machine. 250V, 50 Hz, 1-Ф, With Speed Control. Make:Shyam. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Primary Current Injection Set.220V, 50 Hz, 1-Ф, Output Current - 200 A ( Min ) With Timer Make:Krb / Atico. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ev Charger 3 Phase Input. Make:Tata Power Ez. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ev Charger ( Home ) 1 Phase Input. Make:Tata Power Ez. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Working Bench. 2.5 M X 1.20 M X 0.75 M ( Iron ) Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete.
Contract Date: Ref. Documents Contract Value : ₹ 1.12 Crore
Government Departments No of Bidders 1
Telangana View Result →
Telangana View Result →
16.
Defence #11421445 AOC
Bids Are invited for Modular Standalone Structure Of Armour Wall Panels Of 10Mm Ar 500 Steel, , Bullet Trap Panelling Of All Walls Of 4 Rooms Area , Tactical Breach Doors Panel In Each Room Of Size Minimum 7 Feet X 4 , Window Panels Of Size Minimum 4 X 3 Feet. , Corridor , Anti- Ricochet Flooring , Catwalk , Shed , Sound Reduction Treatment , Noise Reduction Ear Plugs With 2-Way Communication , Portable Targets , Wall Mounted Horizontal Moving Target Systems , 3D Human Figure System , Target Controller , Ventilation System Non- Ac Other Than Control Room Based On Exhaust Fans , Lighting System , Fire Extinguishing System , Wiring, Electricals Fitting, Cabling, , Audio System Communication System , Cctv System Room And 01 In Corridor. , Central Control Room , 125 Kva Silent Generator , Chair , Table , Almirah , Mannequin Deferent Size Total Quantity : 86
Contract Date: Ref. Documents Contract Value : ₹ 8.24 Crore
Statutory Bodies & Commissions/Committees No of Bidders 6
Rajasthan View Result →
17.
Drinking Water Supply and Sanitation #11415826 Technical Bid
Supply And Fitting Fixing Of Main Switch, Pipe, Fittings And Other Additional Electro-Mechanical Work At Ohr Site Of Puncha Water Supply Scheme Under Purulia Mechanical Division Phe Dte.- 1 Supply and delivery of 200 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC60947-1&3). (Make: Approved Vendor list of PHED.) 2 Supply and delivery of 200 Amp/415V. Kit kat rewireable (Porcelain fuse carrier & base) as per IS: 2086.(Make: Approved Vendor list of PHED.) 3 Supply and delivery of 1.1KV grade 70 sq.mm 3.5 core XLPE insulated Aluminium armoured cable conforming to IS 7098 (Part-I) 2011, with upto date amendments.(Make: Approved Vendor list of PHED.) 4 Supply and delivery of100 mm dia. PN 1.0. rating Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, Spindle of IS 6603, Gr-12 cr-13, spindle nut & seat rings are of Gunmetal as per IS:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10/16 kg/sqcm (seat test) and body tested to 15/24 kg/sqcm 350 NB. 5 Supply and delivery of 100 mm dia. MS E.R.W. as per IS: 1239 (part I & II), Thickness 5.4 mm 6 Supply and delivery of 200 mm dia. MS E.R.W. as per IS: 1239 (part I & II), Thickness 7.1 mm 7 Supply and delivery of 150 mm dia. MS ERW B/W ElbowC class (Heavy duty) 8 Supply and delivery of 150 mm x 100 mm MS ERW Reducer. 9 Supply and delivery of 200 mm x 100 mm MS ERW Reducer. 10 Supply and delivery of 100 mm dia. 10.5 kg/cm² MS Slipon flange (ASA 150#B16.5). 11 Supply and delivery of 150 mm dia. D.I. flange socket Tailpiece. 12 Supply, delivery at site and storage of bourdon type Gauges with 150 mm dia cast aluminium dial with SS internal Siphon Tubes, DN 15 mm GI Impulse line withThree Way Cock etc.Pressure Gauge ( 0 - 10 kg / sq.cm ) 13 Compound Gauge ( + 1KSCG to -1KSCG ) 14 MS dismantling joints with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts. PN 1.0 ratings. (Make: Approved make of PHED)i) DN 150 mm 15 DN 100 mm 16 Wiring in 1.1 KV grade single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.(a) 2 x 56/0.3 (4 sqmm) + 1 x 22/0.3 (1.5 sqmm) 17 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 18 Installation above supplied item no. 1.00 to 13.02 and making pipe line with supply and fixing of all necessary nut, bolt, flange, etc. including labour charges of cutting welding by machinery tools and hire charges of Generator, welding set, fuel, lubricants etc. with drawing of power cable from WBSEDCL meter to Main switch to MCC panel through wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting and fixing main switch on MS angle frame with double earthing arrangement with S & F necy cable gland, lugs, nut, bolt etc. as per direction of EIC. 19 Add GST @ 18% 20 Add CESS @ 1%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
18.
Science and Technology #11415633 Technical Bid
Tender for Replacement Of Damaged 48 X 36 Size Panel Board Containing Input/Output Mccb, Changeover At Guest House Generator Room At 21 Gokhale Marg, Lucknow.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttar Pradesh View Result →
19.
Power #11415318 Technical Bid
Tender for Supply Of Siemens Make Spares For Lt Switchgears, Transformers, Esp And Generator Control Panels For Units I To Vii Of Ktps, Kota.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Rajasthan View Result →
20.
Housing Urban and Rular Development #11415087 Technical Bid
Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Indian Cables Ltd./ Polycab / repair renovation Cables / Finolex / Havells Cables. 35 Sqmm Size , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , -Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 105 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , -Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Clear Water Pump: Supplying, Erection, Testing And Commissioning Of Horizontal Motor Pumping Set For Clear Water Having Head As Per The Indicated Requirements Of Discharge In Lpm And Power Capacity In Bhp As Per Is Marked 8400 Lpm X 30.00 M Head (At Mbs) , Ns Item -Design, Construction, Erection And Commissioning Of 1 Ranneywell (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 30 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 1.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Haryana View Result →
21.
Public Administrative Department #11403603 Technical Bid
Tender For Supply Of Materials Under M.C. And E.W. (Con.Of. Anc. Mon.) S.R. To Jain Temple Budhi Chanderi, Distt. Ashoknagar (M.P.) , Unslaked Lime (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Sand Free From Dust (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Brick Metal Good Quality Burnt Brick (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Surkhi Good Quality Bricks (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Stone Slab 50Mm Size Different Size (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , R.R. Stone Different Size (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Diesel (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Wooden Thapies (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , San Fiber (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Gur (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Belgiri (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Nariyal Rassi (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Nut Bolts (Different Size) (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Scaffolding Transportation (From Chanderi To Budhi Chanderi) (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Water Tanker (Water Charges And Water Tanker) 3000 Litre (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Wire Bursh (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Plastic Pan (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Pick Axe (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Crow Bar (20Mm Dia & Height 1.00M.) (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Phawada (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Sharpening Charges Of Tools(Pick Axe 10Mason Tools 100 Nos.) (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Plastic Bucket (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Plastic Mug (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Green Mate (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Saftey Equipment (Helmet 15 Nos, Gloves 30 Pairs, Shoes 6 Pairs, Googles 10 Nos,) (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Polithin (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Plastic Drum 200 Ltr. (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Sintak Tank 1000 Ltr. (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Tillu Motor Any Reputed Make (1.00 Hp) (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Plastic Cane (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Plastic Lejam 0.5 Inch (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Generator 5.5.Hp (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Transprotation (Lime Grinding Machine Chanderi To Budhi Chanderi And Back) (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Solar Light With Pole ( 50 Watt Led Light With Battery, Solar Panel Having Life 25 Years (Make),Octagonal Pole 6.00 M Height Erection On Cement Concrete(1:2:4) Foundation With Size 20Cmx20cmx90cm(60M Below Ground Level) Etc. Complete. (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Plastic Chair (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Plastic Table (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Electric Wire (2 Core) (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Grinder 5’’ Disc (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Drill Machine (Medium Size ) (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Tool Kit (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Grinder Blade5’’ (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder) , Drill Bit(Different Size) (This Provision Is Inclusive Of Gst Hence No Gst Amount Is To Be Quoted By The Bidder)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Madhya Pradesh View Result →
West Bengal View Result →
23.
Power #11355238 Price Bid
Tender for Repairing And Overhauling Of 62.5 Kva Dg Set At 132 Kv S/S Begampur Under Etd Bahraich , Complete Overhauling/Repairing Of Kirloskar/Eicher Make Diesel Generator Set Installed At 132 Kv Sub-Station Begampur Under Etd, Bahraich. The Work Includes Repairing Of Alternator, Replacement Of Feed Pump Kit, Cem Bearing.Taped Roller. Control Rod, Starting Spring, Oil Seal, Packing Kit, Element, Delivery Valve Etc. Including Radiator Cleaning And Other Associated Work To Complete The Work Satisfactory. All Material, Labour And T&P For The Above Work Arranged By The Contractor At Their Own Construction , Control Panel Repairing Including Cleaning And Other Works. , Laying Of 3.5 X 50 Mm Power Cable From Installed Dg Set To Acdb Approx. 90 Meter After Making Trench By Digging 0.2X0.5 Meter Below The Ground Laying Bricks Both Side And Cover With Sand And Bricks Along With Other Associated Works With All Cost Of Men, Materials And Materials miscellaneous Consumables, T&P To Complete The Job Satisfactorily. Per Meter Cost Rs-410 , Spray Painting Of 62.5 Kva Dg Set With One Coat Of Red Oxide Primer Of Standared Make Light Grey 608-4 Synthatic Enamel Paint Of Eaning Of Rust Cust, And Oily Surface Including Cost Of And Tnp Etc As Per Technical Specification
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Odisha View Result →
25.
Power #11334357 Price Bid
Supply of various operation & maintenance registers at various 220 KV & 132 KV Sub-Stations under ETD Bahraich - Printing and supply of various registers of size 33 cm x 21 cm duly hard bound and containing 200 printed pages on good quality Green ledger paper sheet after computer designing and offset printing as per sample 2 Message Register 3 Stoppage Register 4 Log Sheet 5 Tripping Register 6 Maximum/Minimum Load Register 7 Supply Position Register 8 Shutdown & Work Permit Register 9 Defect Register 10 Shift Register 11 Testing Register 12 Battery Register 13 Energy Register Daily 14 LA Register 15 SF6 Register 16 Generator Log Book 17 Red Hot Register 18 Patrolling Register 19 Plant History Register 20 T/F Maintenance Register (03 Months) 21 T/F Maintenance Register (06 Months) 22 T/F Maintenance Register (01 Year) 23 Battery Maintenance Register (03 Months) 24 Battery Maintenance Register (06 Months) 25 Battery Maintenance Register (01 Year) 26 CT/PT/CVT Maintenance Register (01 Year) 27 Relay Panel Register (03 Month)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Uttar Pradesh View Result →
26.
Heavy Industries and Public Enterprises #11329163 AOC
Bids Are Invited For Mat. Code-W90418109141 Fibre Optic Generator End Winding Vibration Monitoring System For 16 Channels , Mat Code-W90418109192 Fibre Optic Sensor With Conditioner 6 Mtr Integrated Cable For Generator Ew V , Mat Code-W90418109206 Fibre Optic Sensor With Conditioner 10Mtr Integrated Cable For Generator Ew V , Mat Code-W90418109133 Commissioning Of Fibre Optic Generator End Winding Vib. Monitoring System , Mat Code- W90418109168 Panel Accessories For Gen. End Winding Vibration Monit. System Including Lap , Mat Code-W90418109176 Junction Box And Accessories For Fo End Wndg Vibration Mon. System Total Quantity : 16
Contract Date: Ref. Documents Contract Value : ₹ 51.00 Lakh
Boards / Undertakings / PSU No of Bidders 2
Uttarakhand View Result →
27.
Water Resources and Irrigation #11326998 AOC
Procurement Of Emergency Spare Parts And Maintenance For Stage I & Stage Ii Pumping Stations Of Rajiv Bhima Lift Irrigation Scheme - Lift Ii At Thirumalayapally And Kothakota Villages Respectively, Kothakota Mandal, Wanaparthy District.-1 64 Sixty four only Procurement and installation of 12 V 100 AH batteries and 15 KVA UPS services for Stage I and Stage II pumping stations as directed by the Engineer-in-Charge. 2 1 One only Overhauling, Service and transportation charges including replacement of faulty components of 250 KVA diesel generator set at RBLI Lift-II Stage I as directed by the Engineer-in-Charge. 3 48 Forty eight only Procurement of carbon brushes for 4 MW and 12 MW Motor for Stage I and Stage II pumping stations as directed by the Engineer-in- Charge. 4 1 One only Procurement of dual channel hall effect speed sensor for 12 MW Pump for Stage I and Stage II pumping stations as directed by the Engineer-in-Charge. 5 6 Six only Procurement of shaft seal flow switches for Stage I and Stage II pumping stations as directed by the Engineer-in-Charge. 6 2 Two only Procurement of over voltage protection arrester for UCB panel for Stage I and Stage II pumping stations as directed by the Engineer-in- Charge. 7 2 Two only Procurement of temperature scanners for PLC panel for Stage I and Stage II pumping stations as directed by the Engineer-in-Charge. 8 15 Fifteen only Procurement of 3P 40 A power contactors for Stage I and Stage II pumping stations as directed by the Engineer-in-Charge. 9 30 Thirty only Procurement of 150 mm pipe line for fire fightng line for Stage I and Stage II pumping stations as directed by the Engineer-in-Charge. 10 30 Thirty only Procurement of 100 mm pipe line for fire fighting line for Stage I and Stage II pumping stations as directed by the Engineer-in-Charge. 11 8 Eight only Procurement of 100 mm BFV valve in cooling water line for Stage I and Stage II pumping stations as directed by the Engineer-in-Charge. 12 6 Six only Procurement of 3 mm gasket for cooling water strainers for Stage I and Stage II pumping stations as directed by the Engineer-in-Charge. 13 88 Eighty eight only Reparing and servicing and AMC of air conditioning per ton cost (without compressor AMC) for Stage I and Stage II pumping stations as directed by the Engineer-in-Charge.
Contract Date: Ref. Documents Contract Value : ₹ 25.19 Lakh
Government Departments No of Bidders 1
Telangana View Result →
28.
Public Administrative Department #11326438 Technical Bid
Tender for Repair Of Sludge Motor, Purchase Of Generator Sets, Starter Panel For Mayapuri & Shakti Nagar Disposals Under Sub Zone-B3.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Punjab View Result →
29.
Public Administrative Department #11326437 Technical Bid
Tender for Repair Of Sludge Motor, Purchase Of Generator Sets, Starter Panel For Basti Jodhewal & Bhagwan Nagar Disposals Under Sub Zone-B3.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Punjab View Result →
Haryana View Result →
31.
Educational and Research Institute #11325641 Technical Bid
Tender for For Procurement, Installation And Maintenance Of Digital Generator Work Under Pm-Usha Scheme For Vidya Prabodhini College , Supply ,Installation ,Testing And Commissioning Of 40 Kva 3 Phase Cpcb Iv+ With Control Panel: Amf Logic Panel, Controller:Dief Exhaust Treatment System: Doc Fueltank: 105 Ltrs Or As Per Manufacturer. Alternator: Cg/,Stampford/Kirloskar Engine: Vecv ( 483 Tcic.Cummins,Kirloskar/Escorts/Eicher ) , Including All Approvals From Department. , Supply,Installation And Commissioning Of 125A Ats In Steel Enclosure Type ( Elmeasure/ Axon ) Auto Changeover Panel , Transpotation Of The Dg From Factory To Site , Crane Charges Towards Unloading Of The Dg , Labour Charges Towards Carrying Out Electrical Termination Of Main Cable/ Control/ Load Cable. (Complete) , Genset Civil Foundation Plain Cement Concrete Of Size (3 Mtr By 1.5 Mtr By 0.30 Mtr). Without Steel , Permission From Electricity Department
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Private Organizations No of Bidders 2
Goa View Result →
Maharashtra View Result →
33.
Railways #11322831 AOC
Bids Are invited for Supply, installation, testing, and commissioning of 125 kVA diesel generator set as per the technical Specification attached. Duly dismantling the existing 50KVA DG set for ERS - Supply, installation, testing, and commissioning of 125 kVA diesel generator set as per the technical Specification attached. Duly dismantling the existing 50KVA DG set , Supply and laying of 3.5 x 150 sqmm aluminium armoured cable with glands and termination for ERS territory. - Supply and laying of 3.5 x 150 sqmm aluminium armoured cable with glands and termination (in mtrs) , Supply and laying of 3.5 x 95 sqmm aluminium armoured Cable with glands and termination for ERS territory. - Supply and laying of 3.5 x 95 sqmm aluminium armoured Cable with glands and termination in mtrs , Earth pit with earth chamber, 2x2 copper plate with 1.5 inch Dia with 2mtr long GI pipe B class and suitable size of Trench, compound, Termination, for ERS territory. - Earth pit with earth chamber, 2x2 copper plate with 1.5 inch Dia with 2mtr long GI pipe B class and suitable size of Trench, compound, Termination. , Supply and laying of 1.5 x 4 core UG cable for using ATS function, for ERS territory. - Supply and laying of 1.5 x 4 core UG cable for using ATS function in mtrs , 25x3 SWG copper strip for using earth conductor, for ERS territory. - 25x3 SWG copper strip for using earth conductor in mtrs , GSB Generator switch board with 200 A MCCB as incomer and 2nos 125A MCCB as out going with suitable size of busbar and enclosure, for ERS territory. - GSB Generator switch board with 200 A MCCB as incomer and 2nos 125A MCCB as out going with suitable size of busbar and enclosure , Double compression gland for ERS territory. - Double compression gland , 16 sq.mm copper wire for ERS territory. - 16 sq.mm copper wire in mtrs , 16 mm, 4 inch exhaust pipe extension with MS pipe for ERS territory. - 16 mm, 4 inch exhaust pipe extension with MS pipe in mtrs , Removal of existing AMF panel and fixing of 2nos ATS panel for ERS territory. - Removal of existing AMF panel and fixing of 2nos ATS panel in lumsum , Supply of 100 amps ATS Panel for ERS territory - Supply of 100 amps ATS Panel , Existing DG foundation extension workfor ERS territory. - Existing DG foundation extension work in lumsum , Electrical inspectorate scheme preparation, site inspection fee, testing, etc for ERS territory. - Electrical inspectorate scheme preparation, site inspection fee, testing, etc in lumsum , Supply of 15KVA Diesel Generator 3 Phase I O, including trasportation, loading and unloading for SBC - Supply of 15KVA Diesel Generator 3 Phase I O, including trasportation, loading and unloading , Supply of 25KVA Diesel Generator 3 Phase I O, including trasportation, loading and unloading for SBC - Supply of 25KVA Diesel Generator 3 Phase I O, including trasportation, loading and unloading , Supply of 50 KVA Diesel Generator 3 Phase I O, including trasportation, loading and unloading for SBC - Supply of 50 KVA Diesel Generator 3 Phase I O, including trasportation, loading and unloading , Supply of materials for provision of concrete foundation for DG Set as per Site requirement for SBC - Supply of materials for provision of concrete foundation for DG Set as per Site requirement , Installation of concrete foundation for DG Set as per Site requirement for SBC - Installation of concrete foundation for DG Set as per Site requirement in lumsum , Installation of DG set on the foundation for DG Set for SBC - Installation of DG set on the foundation for DG Set , Supply and Termination of power cable on AMF Panel, DG sets and AC Main Distribution Panel for DG Set including trenching and laying as per Site requirement for SBC - Supply and Termination of power cable on AMF Panel, DG sets and AC Main Distribution Panel for DG Set including trenching and laying as per Site requirement in lumsum , Supplying and installation of earthing material for three pits for DG Set for SBC - Supplying and installation of earthing material for three pits for DG Set in lumsum Total Quantity : 239
Contract Date: Ref. Documents Contract Value : ₹ 55.55 Lakh
Government Departments No of Bidders 8
Kerala View Result →
Gujarat View Result →
Jammu And Kashmir View Result →
36.
Public Administrative Department #11311364 Technical Bid
Tender for Rate For Construction Items/Materials Of Labpur Development Blocks Jurisdiction Of Fy-2026-27 (Including All Taxes). , Laying And Jointing Pvc Pipe. Heading , Welding By Electric Plant , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller- 8 To 10 Tonne , Vibrator (Needle Type 40 Mm) , Surface Vibrator , Water Tanker 5000 Ltr. Capacity , 1St Class Picked Jhama Bricks(Traditional) , 1St Class Traditional Bricks (Kiln Burnt) , Modular Fly Ash Bricks , Fly Ash Bricks(Traditional) , Coloured Inter Locking cement concrete Paver Block , Moorum , Fine Sand , Medium Sand , Coarse Sand , Coarse Sand , Portland Cement , White Cement , Water Proofing Materials , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Grade 1 Stone Metal 63 Mm To 45 Mm , Polythene Sheet (150 Gm Per Sqm) , Thermocol 12.5 Mm Thick. , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Vitrified Floor Tile 60X60 Cm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , Bitumen Vg-30 , Bitumen Emulsion , Coal Tar , Diesel Oil , Sal Silliguri -In/C Labour Cost , Sal Malaysia-In/C Labour Cost , Neem Wood -In/C Labour Cost , Other Local Wood -In/C Labour Cost , Ordinary Teak Wood -In/C Labour Cost , Sisu/Gamar Wood -In/C Labour Cost , Local Sal Wood -In/C Labour Cost , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Malayasia Sal Cleat , Wood Dust , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Supplying Solid Flush Type Doors Of Commercial Quality , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Anodised Aluminium Hanging Type Door Stopper , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Ms Integrated Grill For Steel Window And Ventillator , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay(Straight Peg Type)300Mm Not Less Than 0.33 Kg , Mirror Of Superior Make Glass 60X45 Cm , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging , Fitting & Fixing Circular Corrugated Aluminium Sheet , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , G I Wire , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Fan Hook , Reinforced Cement Concrete Pipe 600 Mm Dia Np- 3 Spigot , Reinforced Cement Concrete Pipe 900 Mm Dia Np - 3 Spigot , Reinforced Cement Concrete Pipe 1000 Mm Dia Np -3 Spigot , Reinforced Cement Concrete Pipe 1200 Mm Dia Np - 3 Spigot , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes (Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , 32 Mm Dia Polythene Flush Pipe , H.P. Or L.P. Ball Valve With Polythene Floats: 15 Mm Dia , H.P. Or L.P. Ball Valve With Polythene Floats: 20 Mm Dia , H.P. Or L.P. Ball Valve With Polythene Floats: 25 Mm Dia , 20 Mm Dia Gunmetal Gate Valve With Wheel , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Slotted Cowl (Terminal Guard) 75 Mm Dia , Slotted Cowl (Terminal Guard) 100 Mm Dia , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Upvc Single Equal Tee (Without Door) 75X75x75 Mm , Upvc Single Equal Tee (Without Door) 110X110x110 Mm , Upvc Bend 87.50, 75 Mm Bend , Upvcbend 87.50, 110 Mm Bend , Upvc Pipe Clip 75 Mm Bend , Upvc Pipe Clip 110 Mm Bend , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , C.P. Brass Stop Cock (Concealed) 15 Mm , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm Dia , Supplying, Fitting And Fixing Pillar Cock Of Approved Make Cp Pillar Cock - 15 Mm Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand. , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , C.P. Over Brass Waste Fittings 32 Mm , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Towel Rail (Cp Over Brass )- 600 Mm , Shower Rose C.P Brass For 15 To 20 Mm Intel 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Intel 150 Mm Dia , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Foot Rests 250X125x25 Mm , Vitreous China Pedestal For Wash Basin , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Ci Manhole Cover 450 Mm Dia , C.I. Grating 100X100 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Adhesive Solvent Cement , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Acrylic Exterior Paint , Coal Tarring , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Loading, Unloading And Stacking By Manual Means Of Steel , Loading, Unloading & Stacking By Manual Means (R.C.C. Pipes , C.I. Pipes And Unreinforced Cement Pipes) 600, 700, 750 & 800 Mm Dia , Loading, Unloading & Stacking By Manual Means (R.C.C. Pipes , C.I. Pipes And Unreinforced Cement Pipes) 900 Mm Dia , Loading, Unloading And Stacking By Manual Means (R.C.C. Pipes , C.I. Pipes And Unreinforced) Cement Pipes 1000, 1100 & 1200 Mm Dia , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Wire Mesh (Rabbit) , Sausage Wire Net , 1.5 Mm Thick Ms Sheet , Galvanised Steel Plain Sheets , Galvanised Steel Corrugated Sheets , Stainless Steel Bolts /Square Bar And Plates , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , Collapsible Gate , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Cowdung , Empty Gunny Bag , Open Weave Jute Geo-Textile (Jgt) Having Overall Weight Of 500 Gm Per Sq. M Thickness 5 Mm, Width 1220 Mm, Tensile Strength 10 Kn/M X 7.50 Kn/M Including Lapping, Staples Or Nails, Testing , Woven Jute Geo-Textile (Jgt) 724 Gm/Sqm Possessing Tensile Strength Of 25 Kn/M Including Lapping, Staples Or Nails, Testing , Geotextile 120 Gram Per Sqm Membrane
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
West Bengal View Result →
Arunachal Pradesh View Result →
Delhi View Result →
39.
Educational and Research Institute #11294683 Technical Bid
Tender for Purchase Of Digital And Analog Communication Lab Equipment(Tansche) , Digital And Analog Communication Lab Equipment(Tansche) , Digital Ic Trainer Kit: 1. Equipped With 16 High-Visibility Leds For Monitoring Experimental Outputs And Logic Status Indication. 2. Dedicated Driver Circuitry Provided For Reliable Operation And Protection Of All 16 Leds During Experimentation. 3. All 16 Driver Input Lines Are Terminated Through Banana Connectors For Flexible And Easy External Interfacing. 4. Includes 16 Spdt Toggle Switches For Generating Manual Logic Input Conditions In Digital Electronics Experiments. 5. Additional 16 Leds Provided To Display The Real-Time Status Of Individual Switch Operations. 6. One Terminal Of Each Spdt Switch Is Externally Accessible Through Banana Sockets For Convenient Circuit Connections. 7. Built-In Variable Clock Generator Enables Pulse Generation For Sequential And Timing-Based 8. Digital Experiments. 9. Frequency Adjustment Provided Through Potentiometer And Rotary Switch Combination For Precise Clock Selection. 10. Clock Output Is Terminated Through Banana Connectors For Quick Integration With External Circuits And Trainer Modules. 11. Features Dual 7-Segment Led Display With 7447 Decoder/Driver Ic For Bcd To Display 12. Conversion Experiments. 13. Inputs Of The 7447 Drivers Are Terminated At Banana Connectors For Direct Digital Logic Interfacing. 14. Includes Solderless Breadboard For Rapid Circuit Prototyping And Reusable Experimental Setup Development. , Amplitude Modulation Trainer Kit: 1) On Board Carrier And Modulating Signal Generator With Amplitude And Frequency Adjustable 2) Carrier And Modulating Signals Are Provided In The Unit With Frequency Variable. 3) In-Built Regulated Power Supply 4) On Board Envelope Detector 5) Schematic Diagram Provided In The Front Panel Modulating Signal Frequency : (300Hz-3 Khz) Amplitude : (0-5) V Carrier Signal Carrier Signal Frequency : 10 Khz - 50 Khz Amplitude : (0-15) V Type Of Modulator : 1. Ring Modulator 2. Transistor Based Modulator Method Of Modulation : 1. Under Modulation 2. Critical Modulation 3. Over Modulation , Fm Trainer Kit 1) On Board Sine Wave Generator 2) Provision To Study Modulation & Demodulation In The Same Unit 3) Test Points To Study Different Waveforms 4) In-Built Audio Power Amplifier 5) Mic Pre Amplifier 6) Built-In Power Supply 7) Sine Wave Generator : Frequency - 100Hz To 1.2 Khz With Amplitude Adjustable, (0-5V) 8) Fm Modulator : Direct Fm 9) Carrier Frequency : 20 Khz (Low), 367 Khz(High) 10) Fm Demodulator : Pll Detector, Quadrature Detector, Foster Seelay Discriminator / Phase Discriminator, Ratio Detector Are Provided. 11) Audio Power Amplifier : Gain 100 12) Mic Pre Amplifier : Gain 20 , Ask, Fsk, Psk Trainer Kit A S K Modulation & Demodulation Trainer  On Board Data Generator Circuit.  Auto / Manual Mode (Data Generation)  External Patching Provision Provided Between The Modulator And Demodulator.  Built-In Power Supply.  Modulator And Demodulator Are Separately Provided.  Easy Interconnections Are Made By Patch Cords.  Mode : Auto / Manual  Input Data Rate : 800Hz To 2 Khz  Any External Ttl Compatible Sequence With Frequency Up To 2.1 Khz.  Carrier Frequency : 20 Khz  Power Supply Ratings: 230V + 10%, 50Hz. F S K Modulation & Demodulation Trainer  Three Types Of I/P Sources - Manual Input , Square Input , Rs232 Input  Fsk Modulator With, Mark Frequency: 1070 Hz Space Frequency: 1270  Pll Based Fsk Demodulator  Output Provided Through Bs2 Connector And Serial Port.  Built-In Power Supply. P S K Modulation & Demodulation Trainer  On Board Programmable Data Generator  On Board Carrier Generator  Mimic Diagram In The Front Panel  Type Of Modulator : Balance Modulator  Type Of Demodulator : Balance Demodulator  Binary Inputs - 8-Bit Data Length  50 Khz, Clock  Carrier Inputs Frequency : 200 Khz Amplitude : 2 V Pp  Level Converter : Unipolar To Bipolar  Supply Ratings Ac Input (230V, ± 10%, 50Hz) Dc Output (+12V,-12V, +5V, Gnd , Pam, Pwm, Ppm Trainer Kit  Pam- Ppm- Pwm Modulation And Demodulation Techniques, Using Natural And Flat-Top Sampling.  Natural Sample, Sample And Hold And Flat-Top Outputs.  Selectable 2 Different Sampling Pulse Frequencies On Board.  On Board Sine Wave Generators.  Voice Communication Using Dynamic Microphone And Speaker  On Board Filters And Amplifier  Functional Blocks Indicated On Board Mimics  Input- Output And Test Points Provided On Board.  Built In Dc Power Supply  Fully Documented Operating Manual  Switch Faults  Pulse Modulation Techniques : (1) Pulse Amplitude Modulation (2) Pulse Width Modulation (3) Pulse Position Modulation  Crystal Frequency : 6.14Mhz  Sampling Frequency : 16 Khz, 32 Khz  Sine Wave Generator : 1 Khz & 500 Hz, Amplitude (0-5) V, Tolerance +5%  Low Pass Filter : 4Th Order Bw Filter, Cut Off Frequency 3.4 Khz  Voice Communication: Voice Link Using Dynamic Mic & Speaker  Ac Amplifier : With Adjustable Gain Control  Interconnections : Uninsulated Sockets.  Power : 230V, 50Hz  Accessories : Manual Set Of Patch Chords, Microphone & Speaker
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 14
Tamil Nadu View Result →
40.
Educational and Research Institute #11294681 Technical Bid
Tender for Purchase Of Trainer Kits And Function Generator , Trainer Kits And Function Generator , Function Generator Frequency Range : 0.11 Hz To 3.33 Mhz Waveforms: Sine, Triangle, Pulse, Square Ttl And Cmos Outputs Duty Cycle Control And Variable Dc Offset Control -20Db * 2 And Variable Attenuator. Waveform Types Sine, Triangle, Pulse, Square Ttl And Cmos Outputs Ttl Output Range 4Vpp - 20Vpp 4.8Vpp Sine Wave Distortion 0.11 Hz-100: Max 0.5 % 0.1 Mhz - 0.3 Mhz Max 1.5% 0.3 Mhz - 3Mhz Max 3% Square Wave Rise /Fall Time Overshoot Duty Cycle ≤ 60Ns ≤ 7.5% 50% Pulse Wave Pulsewidth Range Rise /Fall Time 15 % To 85 % ≤ 60Ns Ttl Output Level Amplitude Fan-Out Rise /Fall Time ≥4.8Vpp 10Ttl Load ≤ 60Ns The Display Shows Function And Frequency On The 16*2 Lcd Display Amplitude We Get From 1.5 V Pp To 20 V Pp And Varies As Per The Different Frequency Range Amplitude Distortion Without Load Wave 1 Mhz 2Mhz Sin 20 Vpp 18 Vpp Square 20 Vpp 20 Vpp Triangle 20 Vpp 16 Vpp Pulses 20 Vpp 18 Vpp Ttl 5 Vpp 5 Vpp Dc Varies From 0 ± 5V Dc Function Generator Frequency Range : 0.11 Hz To 3.33 Mhz Waveforms: Sine, Triangle, Pulse, Square Ttl And Cmos Outputs Duty Cycle Control And Variable Dc Offset Control -20Db * 2 And Variable Attenuator. Waveform Types Sine, Triangle, Pulse, Square Ttl And Cmos Outputs Ttl Output Range 4Vpp - 20Vpp 4.8Vpp Sine Wave Distortion 0.11 Hz-100: Max 0.5 % 0.1 Mhz - 0.3 Mhz Max 1.5% 0.3 Mhz - 3Mhz Max 3% Square Wave Rise /Fall Time Overshoot Duty Cycle ≤ 60Ns ≤ 7.5% 50% Pulse Wave Pulsewidth Range Rise /Fall Time 15 % To 85 % ≤ 60Ns Ttl Output Level Amplitude Fan-Out Rise /Fall Time ≥4.8Vpp 10Ttl Load ≤ 60Ns The Display Shows Function And Frequency On The 16*2 Lcd Display Amplitude We Get From 1.5 V Pp To 20 V Pp And Varies As Per The Different Frequency Range Amplitude Distortion Without Load Wave 1 Mhz 2Mhz Sin 20 Vpp 18 Vpp Square 20 Vpp 20 Vpp Triangle 20 Vpp 16 Vpp Pulses 20 Vpp 18 Vpp Ttl 5 Vpp 5 Vpp Dc Varies From 0 ± 5V Dc 1. Equipped With 16 High-Visibility Leds For Monitoring Experimental Outputs And Logic Status Indication. 2. Dedicated Driver Circuitry Provided For Reliable Operation And Protection Of All 16 Leds During Experimentation. 3. All 16 Driver Input Lines Are Terminated Through Banana Connectors For Flexible And Easy External Interfacing. 4. Includes 16 Spdt Toggle Switches For Generating Manual Logic Input Conditions In Digital Electronics Experiments. 5. Additional 16 Leds Provided To Display The Real-Time Status Of Individual Switch Operations. 6. One Terminal Of Each Spdt Switch Is Externally Accessible Through Banana Sockets For Convenient Circuit Connections. 7. Built-In Variable Clock Generator Enables Pulse Generation For Sequential And Timing-Based 8. Digital Experiments. 9. Frequency Adjustment Provided Through Potentiometer And Rotary Switch Combination For Precise Clock Selection. 10. Clock Output Is Terminated Through Banana Connectors For Quick Integration With External Circuits And Trainer Modules. 11. Features Dual 7-Segment Led Display With 7447 Decoder/Driver Ic For Bcd To Display 12. Conversion Experiments. 13. Inputs Of The 7447 Drivers Are Terminated At Banana Connectors For Direct Digital Logic Interfacing. 14. Includes Solderless Breadboard For Rapid Circuit Prototyping And Reusable Experimental Setup Development. , Strain Gauge Study Trainer This Trainer Shall Consists Of Cantilever Jig And Strain Gauge Bonded On The Cantilever, A Signal Conditioner For The Strain Gauge, Instrumentation Power Supply, 3½ Digit Digital Indicator Display The Strain. * Cantilever Beam Of Maximum Weight Upto 1Kg. * A Pan With Slotted Weights To Vary The Strain. * Built In Instrumentation Power Supply * Signal Conditioning Card For The Strain Gauge * 3½ Digit Digital Display For Displaying The Strain * Offset And Gain Variable Provision * Logical Diagram With Panel. * Mounted In Sleek Cabinet. 1) On Board Carrier And Modulating Signal Generator With Amplitude And Frequency Adjustable 2) Carrier And Modulating Signals Are Provided In The Unit With Frequency Variable. 3) In-Built Regulated Power Supply 4) On Board Envelope Detector 5) Schematic Diagram Provided In The Front Panel Modulating Signal Frequency : (300Hz-3 Khz) Amplitude : (0-5) V Carrier Signal Carrier Signal Frequency : 10 Khz - 50 Khz Amplitude : (0-15) V Type Of Modulator : 1. Ring Modulator 2. Transistor Based Modulator Method Of Modulation : 1. Under Modulation 2. Critical Modulation 3. Over Modulation , Load Cell Study Trainer This Module Shall Consists Of A 5Kg Load Cell Sensor, Weights, Signal Conditioner And 3½ Digit Digital Indicators To Display The Load. * Strain Gauge Based Load Cell Sensor Of 5Kg Capacity * A Pan Provision For Placing The Standard Weights Signal Conditioner For Load Cell (Output 0-5V) * Built In Instrumentation Power Supply * Zero Calibration Provision. * 3½ Digit Digital Indicator To Display The Applied Load. * Mounted In A Elegant Powder Coated Cabinet With Mimic Diagram 1) On Board Sine Wave Generator 2) Provision To Study Modulation & Demodulation In The Same Unit 3) Test Points To Study Different Waveforms 4) In-Built Audio Power Amplifier 5) Mic Pre Amplifier 6) Built-In Power Supply 7) Sine Wave Generator : Frequency - 100Hz To 1.2 Khz With Amplitude Adjustable, (0-5V) 8) Fm Modulator : Direct Fm 9) Carrier Frequency : 20 Khz (Low), 367 Khz(High) 10) Fm Demodulator : Pll Detector, Quadrature Detector, Foster Seelay Discriminator / Phase Discriminator, Ratio Detector Are Provided. 11) Audio Power Amplifier : Gain 100 12) Mic Pre Amplifier : Gain 20 , Lvdt Study Trainer It Shall Consists Of A Lvdt Sensor, Signal Conditioner And A Digital Indicator To Display The Displacement Cantilever Jig With Micrometer. * Lvdt Sensor With Micrometer (Range: 0-25Mm) * Signal Conditioner For Lvdt * Displacement Calibrated Range From (-10Mm To + 10Mm) * Output Voltage (-5V To +5V) * Built In Instrumentation Power Supply * A 3½ Digit Digital Indicator To Display The Displacement * Mounted In A Elegant Powder Coated Cabinet. * Logical Diagram In The Panel Detailed Documentation , Thermistor Study Trainer  One Negative Temperature Co- Efficient Type Thermistor Sensor Is Used As A Temperature Sensor.  Signal Conditioner For Thermistor Transducer: Output 5-0V  Built In Instrumentation Power Supply  A 3½ Digit Digital Indicator Is Used For Voltage Display  Zero Calibration Provision  Water Bath Is Used As A Heat Source.  Thermometer Is Provided To Monitor The Actual Temperature.  Mounted In An Elegant Cabinet , Thermo Couple Study Trainer * One J Type Thermocouple Is Used As A Temperature Sensor * One Ad590 Sensor Is Used For Cold Junction Compensation * Signal Conditioner For J Type Thermocouple Output: (0-5V) * Built In Instrumentation Power Supply * 3½ Digit Digital Indicator To Display The Temperature. * Water Bath Is Used As A Heat Source * Zero Calibration Provision * Thermometer Provided To Monitor The Temperature * Mounted In A Elegant Powder Coated Cabinet * Logical Diagram In The Panel Detailed Documentation , Rtd Study Trainer * Pt100 Type Rtd Is Used As A Temperature Sensor * 3 Wire Configurations Is Provided Signal Conditioner For Rtd Output Is (0-5V) * Built-In Instrumentation Power Supply * A 3½ Digit Digital Indicator To Display The Temperature * Water Bath Is Used As A Heat Source. * Thermometer Provided To Monitor The Actual Temperature * Mounted In A Closed Cabinet. Detailed Documentation. , Piezo Electric Transducer Study Trainer This Trainer System Shall Consists Of Vibration / Acceleration Sensor Of Piezo Electric Type, Signal Conditioner, Regulated Power Supply, 3½ Digit Digital Indicator Etc Provided To Study The Characteristics Of Piezo Electric Sensor * Vibration Sensor Of Piezo Electric Type Mounted In The Base Plate To Sense The Vibration Of The Material. * Precision Rectifier Circuit For Above Sensor. * Signal Conditioner Of (0-10)Vdc * Ic Regulated Power Supply * 3½ Digit Digital Indicator To Display The Voltage. * Logical Diagram In The Panel * Mounted In A Powder Coated Closed Cabinet. Vibrator Exciter  One Mechanical Setup Provided  One Vibration Motor To Vibrate The Mechanical Setup # I/P : 230V Ac/50 Hz # Power : Max: 0.5 Hp One Auto Transformer Is To Vary The Input Voltage For Mechanical Setup , Schrings Bridge * 4 Arms With Suitable Connectors. * Provision To Connect The Unknown Capacitance At One Arm * Two Potentiometers Provided At Two Arms To Obtain The Bridge Balance Condition. * Input Of The Bridge Is Taken From A 1Khz Fixed Amplitude Oscillator. * One Audio Amplifier With Miniature Speaker Is Provided To Detect The Bridge Balance Condition Acoustically. * Measuring Range : 0.001Uf - 2.0Uf * Sensitivity : +0.1Uf * Tolerance : +5% * All Are Housed In A Metal Cabinet * Detailed Documentation * Required Patch Chords Are Provided Decade Capacitance Box Dial 1 :0-0.01Mfd In Steps Of 0.001Mfd Dial 2 :0-0.1Mfd In Steps Of 0.01Mfd Dial 3 :0-1Mfd In Steps Of 0.1Mfd Dial 4 :10Mfd In Steps Of 1Mfd Total Range : 0-11.11Mfd , Maxwells Inductance Bridge * Four Arms Are Provided With Suitable Connectors * One Arm With Provisions To Detect The Nearest Range Of Unknown Inductance. * Two Arms With Variable Potentiometers Given To Balance The Bridge In Null Condition * One 1 Khz Oscillator Of Fixed Amplitude To Feed The Input To The Bridge. * One Audio Amplifier With Speaker To Detect The Bridge Balancing Conditions. * Measurement Range: 15Mh - 200Mh * Tolerance : +5% * Built-In Power Supply * Connector Facility Given To View The Output Of The Bridge Externally By Cro * All Are Housed In A Powder-Coated Cabinet With Logical Diagram. * Required Patch Chords Are Provided Decade Inductance Box Dial 1 :0-9Mh In Steps Of 1Mh Dial 2 :0-90Mh In Steps Of 10Mh Dial 3 :0-900Mh In Steps Of 100Mh Total Range :0-999Mh , Voltmeter Desk Top Analog Voltmeter (0-1V Dc, 0-10V Dc, 0-30V Dc, 0-5V Dc) Each 5 Nos , Ammeter Desk Top Analog Ammeter (0-10Ma Dc, 0- 50Ma Dc, 0-100Ma Dc, 0-500Microa Dc) Each 5 Nos , Digital Trainer Kit * 16 LedS Are Provided To Indicate The Status/Outputs Of An Experiment. * Drivers Provided To Drive The 16 LedS * All The 16 Inputs Of The Driver Are Terminated At Banana Termination For Easy Wiring Of Any Experimental Setup. Input Switches : * 16 Spdt Switches As Logical Inputs Are Provided. * 16 LedS Provided To Display The Status Of The Switches. One End Of Each Spdt Switch Is Terminated At A Banana Termination For Easy Wiring. , Ic Tester It Is The Latest Microcontroller Based Universal Ic Tester. It Functionally Tests A Wide Variety Of Analog/Linear Ics Including Adc,Dac,Dpm Ics, Op Amps, Transistor Arrays, Waveform Generators And Digital Ics Including Microprocessors, Microcontrollers, Eproms, Rams, Peripheral Devices Apart From 74 Series Of Ttl Ics And 40/45 Series Of Cmos Ics
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Tamil Nadu View Result →
41.
Housing Urban and Rular Development #11294593 Technical Bid
Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Ns Item - Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (35 Sqmm Size) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 200 Kva (As Per Parameters Of Cpcb 4) 200 Kva (As Per Parameters Of Cpcb 4) , Supplying, Erection, Testing And Commissioning Of Horizontal Centrifugal Clear Water Pumping Set Capacity 2780 Lpm X 50 M Head, 45 Bhp Motor, Complete With Installation At Mbs Near Yamuna River. , Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 45 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Design, Construction, Erection And Commissioning Of 2 No. Ranneywell 1 At Machhrola And 1 At Jajjal (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 32 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 2.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Haryana View Result →
42.
Educational and Research Institute #11291088 AOC
Tender for Purchase Of Integrated Electric Motor Drive With Realtime Data Acquisition , Specifications , • Should Have An Inbuilt Controller With Ram And Flash Memory • Interfaces And Features O Voltage Sensor:  Rating: +/- 1000V  Bandwidth: Dc To 250 Khz  Adc: Delta Sigma A/D  Resolution: 16 Bits  Sample Rate: Up To 1 Msps/Ch O Current Sensor  Rating: +/- 80A Peak To Peak, 25A Rms  Bandwidth: Dc To 250 Khz  Adc: Delta Sigma A/D  Resolution: 16 Bits  Sample Rate: Up To 1 Msps/Ch O Should Provide Pwms Of 5V To The Driver Along With Fault Feedback, Reset Function And Dynamic Short Circuit Protection. O Should Have Two Encoder Channel Interface For Speed Measurement And Position Estimation Which Can Be Connected To Motors Encoder And Position Sensors. O Should Have An Inbuilt Lc Filter For The Buck And Boost Operation. O Should Have An Inbuilt Inductor Rating Of 5Mh, 15A. O Should Have Inbuilt Power Capacitors Of Rating Not Less Than 3300Μf With Voltage Rating Not Less Than 400V O Should Have Appropriate Dc Link Capacitors With Dc Voltage Rating Of 350V/600V. O The System Should Be Provided With Single-Phase/Three-Phase Mcb With 16A Protection. O Should Have An Inbuilt Three Phase Uncontrolled Rectifier With Three-Phase Input Voltage Of 415V Ac L-L, And Output Of 600V Dc Should Be Included. O Should Have An Inbuilt Igbt-Based Converter Of 600V Dc Not Less Than 5Kva Capacity For Relevant Drive Operations. • Pwm Generator O The Pwm Generator Should Be Of User Configurable Type. O Carrier Wave Type: Positive Ramp Positive, Negative Ramp, Triangular Wave, Inverse Triangular Wave. O High And Low Threshold Values Should Be Of User Configurable. O Switching Frequency Capability Up To 1Mhz. O Should Have Pwm Short Circuit Protection With Master Trip And Error Flag Indication. • Protections/ Safety O User Configurable Threshold Limits For Over Voltage Protection (Definitive & Instantaneous) O User Configurable Threshold Limits For Under Voltage Protection (Definitive & Instantaneous) O User Configurable Threshold Limits For Over Current Protection (Definitive & Instantaneous) O User Configurable Threshold Limits For Under Current (Definitive & Instantaneous) O User Configurable Threshold Limits For Over Threshold (Definitive & Instantaneous) O Under Threshold And Sensor Error O Should Have Dedicated Indicators • Inbuilt Pc With Touch Screen For The Measurement And Analysis With Following Software Features: O I5 Processor With 8Gb Ram, 128Gb Ssd Sdd, Wifi, Bluetooth, Usb Port, Minimum 15 Inches Industrial Touch Panel Pc And Bluetooth Mouse. • Input / Output Registers O Adequate Number Of Input And Output Registers For Run Time Control Commands And Online Tuning Of User Selected Control Parameters. • Real-Time Storage O Storage Of Real-Time Data For Post Analysis And Data Export Provision To Picture And Data File Format. • Time Plot O Plot Signals Vs Time O Line Plot, Dot Plot O Save Data And Save Figure Options O Offline Analysis (Pause & Analyze) O Time Cursor, Amplitude Cursor O Should Have Up To 16 Number Of Plots O Should Have Up To 8 Signals Per Plot O Individual Y-Axis Per Signal Or Common Y-Axis O Own Window Or Dashboard Widget Option • General Plot O X Vs Y Plot O Line Plot, Dot Plot O Save Data And Save Figure Options O Should Have Up To 16 Number Of Plots O Should Have Up To 8 Signals Per Plot O Individual Y-Axis Per Signal Or Common Y-Axis O Should Have Own Window Or Dashboard Widget Option O Should Highlight The Current Value • Fft Panel To Display Or Measure O Fundamental Frequency O Total Harmonic Distortion (Thd) O Distortion Factor O Harmonic Components Of Signal (Rms, Peak) O Up To 50Th Order Harmonics Report • Power Panel Should Have O A Time-Based Power Measurement. O Measurement Configuration: Single-Phase 2-Wire, Two-Phase 3-Wire, Three-Phase 3-Wire, Three-Phase 4-Wire And Four-Phase. O Output Signals: Active Power (P), Reactive Power (Q), Apparent Power (S), Power Factor (Pf) And Instantaneous Power (Pinst). O Output Table: Rms, Avg, Max And Min Values For Inputs Signals O The Capability To View, Plot And Save Output Signals. O The Provision For Power Vector Diagram. • Should Have Not Less Than 8 User Configurable Dashboards. • Should Provide 64 Probe Panels. • Should Provide Dashboard Arrangement For Experiment Setups. • Should Support Popular Software Package For Captured Data Analysis. • Should Provide View And Analysis Feature Of Instantaneous Pwm Signals, Speed, Position Signals, Input Voltages, Output Voltages, Input Currents And Output Currents Over A Time Plot. • Should Have Provision For Rms, Average, Maximum And Minimum Value Measurement Of Input Voltage, Output Voltages, Input Current And Output Current. • Should Have Provision For Measurement And Analysis Of Instantaneous Input Active Power, Output Active Power, Reactive Power, Instantaneous Output Reactive Power, Instantaneous Input Apparent Power, Instantaneous Output Apparent Power, Input Power Factor And Output Power Factor. • Should Have Provision For Buzzer And Fault Indication On The Display. • Should Have Model Development Flow Through Popular Software Package: Modelling To Binary Generation Within The Software Environment, Generated Binary Must Run On A Higher End Processor Natively With Io Interfacing And Protection Function. • Ability To Generate Pwm Signals Independent Of Control Function Sample Time • Controller Device Library Should Be Provided For A Popular Software Package Environment Should Support The Following List Of Experiments And Must Supply The Source Codes In A Popular Software Package 1. Open Loop Speed Control Of Three Phase Induction Motor Of 1Kw With Mechanical Loading And 1024 Ppr Encoder That Can Be Interfaced With The Above Controller. 2. Clore Loop Speed Control Of Three Phase Induction Motor Of 1Kw With Mechanical Loading And 1024 Ppr Encoder That Can Be Interfaced With The Above Controller. 3. Open Loop Speed Control Of Bldc Motor Of 1Kw With Mechanical Loading And 1024 Ppr Encoder That Can Be Interfaced With The Above Controller. 4. Close Loop Speed Control Of Bldc Motor Of 1Kw With Mechanical Loading And 1024 Ppr Encoder That Can Be Interfaced With The Above Controller. 5. Open Loop Speed Control Of Pmsm Of 1Kw With Mechanical Loading And 1024 Ppr Encoder That Can Be Interfaced With The Above Controller. 6. Close Loop Speed Control Of Pmsm Of 1Kw With Mechanical Loading And 1024 Ppr Encoder That Can Be Interfaced With The Above Controller. 7. Study Of Open Loop And Closed Loop Control Of Single-Phase Inverter Operation With R-Load. 8. Study Of Open Loop And Closed Loop Control Of Three Phase Inverter Operation With R-Load. 9. Study Of Open Loop And Closed Loop Control Of Dc-Dc Buck Converter Operation With R-Load. 10. Study Of Open Loop And Closed Loop Control Of Dc-Dc Boost Converter Operation With R-Load.
Contract Date: Jun 25, 2026 Contract Value : ₹ 9.96 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Tamil Nadu View Result →
43.
Defence #11286957 Technical Bid
Tender for Sch A Part- I To Ix: Note: This Schedule Is Pre-Priced By Mes And The Rate Indicated As Under Col 5 Signifies This Fact Only , Total Amount Of Sch ‘A Part I (Building & Structures) , Total Amount Of Sch ‘A Part Ii (Site Clearance, Excavation & Earthwork ) , Total Amount Of Sch ‘A Part Iii (Cooling Appliances & Air-Conditioning) , Total Amount Of Sch ‘A Part Iv (Dg Set) , Total Amount Of Sch ‘A Part V (Internal Electric Supply) , Total Amount Of Sch ‘A Part Vi (Road / Path) , Total Amount Of Sch A Part-Vii (Area Drainage ) , Total Amount Of Sch A Part-Viii (External Water Supply) , Total Amount Of Sch A Part-Ix (External Electric Supply) , Schedule A Part-X (Misc B/R And E/M Works) Note: This Schedule Is Not Pre-Priced By Mes And The Rate Indicated As Rs 0.00 Under Col 6 Signifies This Fact Only. Bidders Shall Insert Their Rate In Column-7 For That Purpose. , S&F Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 2.0 Kva Complete All As Specified And As Directed By Engr-In- Charge. Makes :- Automatic Electrical (Ae)/ Vinitec/ Aplab/ V Guard , S&F Voltage Stabilizer For Automatic Operation, Single Phase Naturally Air Cooled Indoor Type & Designed For Input Variation Between 170 V To 250 V With Output Voltage Stabilized At 230 V With Accuracy Of ± 2.5% And Of Capacity 3.0 Kva Complete Suitable For Inverter Type Ac All As Specified And As Directed. Makes :- Automatic Electrical (Ae)/ Vinitec/ Aplab/ V Guard/ Volina , Supply, Install, Testing And Commissioning Of Silent Diesel Engine Generating Set, 100 Kva/80 Kw, 1500 Rpm, 3 Phase, 415 V, 50 Hz, Power Supply Alternator Along With Fuel Tank, Control Panel., Battery And Complete Set Installed In Sound Acoustic Enclosure And Standard Accessories And Fittings With Power Factor 0.8, Plain Cement Concrete Foundation Suitable For The Generator Set As Per Manufacturers Instructions Complete With Standard Accessories And Microprocessor Based Integrated Dg Set Controller With Coupled To Alternator Rated At 100Kva/80 Kw At 415 Volts, Set Mounted On Channel Iron Base Frame Complete With Sub-Base With Batteries, Avm Pads And Std Panel All As Per Guideline Of Latest Cpcb Iv+ Norms All As Specified And Directed And Comprising Of The Following: , Note For Item No. 11.30 (I) Engine: Engine With Direct Injection, Water Cooled, 3 Cylinders, In-Line,4 Strokes Rated At Developing 126.8 Bhp @ 1500 Rpm For Continuous Duty Of Suitable For 100 Kva Alternator With Provision Of 10% Over Load For One Hour In Every 12 Hour Running Confirming To Bs 5514/ Iso 3046 Standard Totally Enclosed As Per Oem Specification And Directed By Engr-In-Charge. The Engine Has The Following Specification:- A) Mechanical Fip B) Mechanical Governor C) Turbocharger, Exhaust Manifold, Stainless Steel Exhaust Flexible Connection D) Radiator Cooled, With After Cooled E) Plate Type Lube Oil Cooler F) Filters G) Lube Oil H) Dry Type Replaceable Paper Element Air Cleaner J) Flywheel Housing And Flywheel To Suit Single Bearing Alternator K) Starting Motor-Electric, Battery Charging Alternator L) First Fill Lube Oil And Coolant (Ii) Alternator: Brushless Alternator, Self -Excited, Self -Regulated, Floor Mounted With All And / Or Roller Bearings, Statically And Dynamically Balanced Screen Protected Acoustic Enclosure Confirming To Is 4722 / Is 13364, Ip-23 Protection With H Class Insulation Limited Temperature Rise Of Class H, Automatic Voltage Regulator From No Load To Full Load, Ammeter Capacity Of Delivery 100 Kva, 415 Volts, 3 Phase, 50 Hz And Lagging For Ac Supply And Will Be Suitable For Tropical Conditions All As Per Oem And Directed By Engr-In-Charge. (Iii) Instrument Panel : Engine Instrument Panel Consisting Of On/Off Starting Switch With Key Lubricating Oil Pressure Gauge, Water Temperature Gauge, Battery Charging Indicating Lamp, Hour Meter With Rpm Indicator, Safety Control Against High Temperature Of Water, Over Speed Stop With Double Driver Adopter As Per Oem Specification And Directed By Enge-In-Charge. (Iv) Other Fittings: (A) Battery Charger : Battery Charger Having Electric Circuit Consisting Of Rectifiers, Capacitors And Resistance Etc. The Battery Charger Should Be Able To Charge 12 Volts 88 Ah Battery At A Time (V) Dg Set Shall Be Supplied Along With Acoustic Original Enclosure Of The Manufactures Suitable For 100 Kva Dg Set And All Connecting Accessories As Per Latest Cpcb Iv+ Norms , (Vi) The Diesel Oil, Lub Oil Etc. For Smooth Functioning Of Dg Set During Ph-I & Ph-Il Complete Testing And Full Tank Filing Of Diesel Oil After Ph-I & Ph-Ii Testing, Topping Of Lub Oil Etc. Required For Commissioning And Testing Of Dg Set. (Vii) Amf Panel: - Supply Installing Commissioning & Testing In Microprocessor Based Amf Panel Board Factory Made, Out Door Type Ip-65, Cubical Type, Vermin Proof, Dust Proof, Water Proof Made Out Of 3.15 Mm Thick Crca Sheet And Angle Iron Frame Of Size 50X50x6 Mm Inside Depth Not Less Than 50 Cm And Size Suitable To Accommodate The Following Accessories With Insulated Tpn Copper Busbar Of Rating Not Less Than 1.5 Times The Rated Capacity Of The Incomer Mccb Suitable For 100Kva Dg Set. Hinged Door With Locking Arrangement Duly Painted With Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Both Internally And Externally And Connecting With Cable With Lugs Including Internal Wiring With Copper Cable Of Suitable Size Using Lugs Compressing The Following Accessories All As Directed. (Notes : The Rate Quoted Shall Include For Earth Work & Excavation For Angle Iron Frame For Foundation Of Panel Board Upto 0.50 M Below Gl In Any Type Of Soil & Plain Cement Concrete (1:4:8), D2 Filling In Foundation The Ground Clearance Of Panel Board Shall Be 0.40 M Gl To The Bottom Of Panel Board ) And Copper Bus Bar 240 Amps Duly Colour Sleeved Mounted On Epoxy Insulators-01 Set. Note:(I) Amf Panel Suitable For 100 Kva Dg Set To Connect With Grid Shall Be Approved By Cpri And Certificate To Be Produced And To Be Submitted In The Office. The Amf Panel Has The Following Specification:- A) 160A, 4 Pole Contactor For Alternator With Thermal Over Load Relay B) 160A, 4 Pole Contactor For Mains C) Mcb For Short Circuit Protection D) Indication Led (Dg On, Load On Dg, Main On, Load On Main, Battery Charge On) E) Push Buttons (Engine Start/Stop, Generator Contactor Close/Trip, Main Contactor Close/Trip If Provided, Fault Accept/Reset) F) Voltmeter & Ammeter And Other Connecting Accessories And Safety Features For Successful Auto Operation Of 100 Kva Dg Set. (Viii) Excavation, Earthwork And Provn Of Plain Cement Concrete Plinth Of Suitable Sizes For Installation Of Dg Set & Connected Accessories Complete As Per Oem/ Site Requirements. , S&F Square Profile Led Lighting Fixture With Extruded Polycorbonate, Environmental Friendly, Energy Efficient Ready To Use Pack Led Tube Light Fitting 20 Watt With Led Light Source 6500K With Uniform Light Output, With All Accessories Including Its Connection Complete With All As Specified And Directed By Engineer-In-Charge. Make:Havells Led Pride Essential Cat No Lhexawp7un1w020 Or Equivalent Makes Cg/Philips/Wipro/Luker. , S&F Factory Made Powder Coated Sheet Metal Enclosure, Tpn Vertical Distribution Boards With Mccb As Incomer Ip43 Protection Double Door: Plain 6 Way With Suitable Rated Busbar, Neutral Link, And Mcb Sp/Tp As Outgoings Complete All As Specified And Directed. Note :Mccb And Mcbs Are Not Included In This Item And Paid Separately. , S&F Mccb 4 Pole, 415 V, Adjustable Type Thermal Magnetic Release, 125 Amps With Breaking Capacity 25 Ka And Making Connection With Suitable Size Of Copper Lugs Etc Complete All As Specified And As Directed. , Supply And Laying Double Walled Corrugated (Dwc) Hdpe Pipe Of Nominal Bore 110 Mm Including 90 Degree Bends With Coupler And Rubber Ring, Conforming To Is :16205 Part 24,450 N Laid In Trenches For Cable Protection Complete, All As Specified And As Directed , Supply And Laying Double Walled Corrugated (Dwc) Hdpe Pipe Of Nominal Bore 50 Mm Including 90 Degree Bends With Coupler And Rubber Ring, Conforming To Is :16205 Part 24,450 N Laid In Trenches For Cable Protection Complete, All As Specified And As Directed , M&L For Cutting Of Existing 40 Mm Dia Pipe For Inserting Tee Of Size 40X40x20 Mm Including Lead Joint And Excavation Etc Complete, All As Specified And As Directed , Supply, Install, Testing And Commissioning, Factory Made And Tested (Including Cpri Type Test Certified) Lt Panel Board Out Door Type, Floor Mounted, Compartmentalised And Ip-63 Suitable For 415 Volts 3 Phase 4 Wire, 50 Hz Ac Supply System, All As Specified And Directed, Having Bus Bar Chamber With Insulated Aluminium Bus Bars 250 Amps Rating Installed On Porcelain Insulators. The Panel Shall Be Dust And Vermin Proof, Made Of 3.15Mm Crca Ms Sheet And With Base Frame Of 50X50x6mm Angle Iron , Powder Coated, Front And Rear Opening Type With Aprons For Cable Entry With Double Door Shutter And Locking Arrangement With And Including Following Items. (Notes : The Rate Quoted Shall Include Earth Work & Excavation For Angle Iron Frame For Foundation Of Panel Board Upto 0.50 M Below Gl In Any Type Of Soil & Plain Cement Concrete (1:4:8), D2 Filling In Foundation The Ground Clearance Of Panel Board Shall Be 0.40 M Gl To The Bottom Of Panel Board ).Note: Panel Board Shall Be Approved By Cpri And Certificate To Be Produced And To Be Submitted In The Office. Incoming :- (A) Mccb 4 P, 415 Volt 160 Amps, 32Ka, 50 Hz With Fixed Thermal And Magnetic Setting -01 No Outgoing :- (B) Mccb 4 P, 415 Volt 125 Amps, 25Ka, 50 Hz -01 Nos. (C) Mccb 4 P, 415 Volt 63 Amps, 10 Ka, 50 Hz -02 Nos. (D) R,Y,B Indicators (E) Multifunction Digital Square Type Intelligent Panel Meter To Measure Voltage, Current, Frequency, & Power Factor - 01 No
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 13
Maharashtra View Result →
44.
Public Administrative Department #11286668 AOC
Tender For Construction/Repair Work In Record Room/Nazarat Department - (a) Bricks M-150 2 (b) Bricks M-100 3 (c) Bricks-Straight over brunt 4 (d) Bricks- Tiles (Ist Class) 5 (e) Brick Bats M-75 6 (f) Brick Bats (O.B.) 7 Fly ash Bricks (specification/strength should not be less then Bricks M-150)size 230x110x75mm 8 Fly ash Bricks Tiles (specification/strength should not be less then Bricks M-150)size 230x110x38mm 9 Fly ash Concrete curve Stone (specification/strength should as per mord/morth) size 300x300x150mm (M30) 10 (a) 5.00cm. Gauge 11 (b) 4.00 cm. gauge 12 (c) 2.50 cm. gauge 13 Stone Grading Materials Aggregate - For 37.5 mm Maximum size - 22.4 mm to 5.6 mm 14 Aggregate - For 37.5 mm Maximum size - 45 mm to 22.5mm 15 Aggregate - For 37.5 mm Maximum size - Below 5.6 mm 16 Aggregate - For 53 mm Maximum size - 22.5 mm to 5.6mm 17 Aggregate - Grading I (40 mm nominal Size) 10 mm - 5 / 4.75 mm 18 Aggregate - Grading I (40 mm nominal Size) 25 mm – 10mm 19 Aggregate - Grading I (40 mm nominal Size) 37.25 mm -25mm 20 Aggregate-Grading I 90 mm to 45 mm 21 Aggregate-Grading II 63 mm to 45 mm 22 Aggregate-Grading III 53 mm to 22.4 mm 23 Aggregates 22.4 mm to 2.36 mm for wet mix macadam 24 Aggregates 45 mm to 22.4 mm for wet mix macadam 25 Crushed Sand or Grit Passing 2.36 mm and retained on 180 micron 26 Crushed Stone Aggregate 26.5 mm to 75 micron 27 Crushed Stone chipping 13.2 mm nominal size 28 Crushed Stone Chipping 6.7 mm size 100% passing 11.2 mm and retained on 2.36 mm 29 Crushed Stone Chipping 6.7 mm size 100% passing 9.5 mm and retained on 2.36 mm 30 Crushed Stone chipping 9.5 mm nominal size 31 Crushed Stone Coarse Aggregate Passing 53 mm and retained on 2.8 mm 32 Fine aggregate/Crushed sand 2.36 mm to 75 micron 33 Stone Boulder of size 150 mm and below 34 Stone for Coarse Rubble Masonry 1st Sort 35 Stone for Coarse Rubble Masonry 2nd Sort 36 Stone for Random Rubble Masonry 37 Stone for Stone Set Pavement (300 mm x 200 mm x 150MM 38 Well Graded Material for Sub-Base - Grading I 2.36 mm below 39 Well Graded Material for Sub-Base - Grading I 53 mm to 9.5 mm 40 Well Graded Material for Sub-Base - Grading I 9.5 mm to 2.36 mm 41 Well Graded Material for Sub-Base - Grading II 2.36 mm below 42 Well Graded Material for Sub-Base - Grading II 26.5 mm to 9.5 mm 43 Well Graded Material for Sub-Base - Grading II 9.5 mm to 2.36 mm 44 Well Graded Material for Sub-Base - Grading III 2.36 mm below 45 Well Graded Material for Sub-Base - Grading III 4.75 mm to 2.36 mm 46 Well Graded Material for Sub-Base - Grading III 9.5 mm to 4.75 mm 47 Boulder with minimum size of 300 mm for Pitching at Site 48 Granular Material or hard murrum for GSB works at Site 49 Close graded Granular sub-base Material 37.5 mm to 9.5 mm 50 Close graded Granular sub-base Material 9.5 mm to 4.75 mm 51 Close graded Granular sub-base Material 4.75mm to 75 micron mm 52 Close graded Granular sub-base Material 2.36 mm 53 Coarse graded Granular sub-base Material 4.75mm to 75 micron mm 54 Coarse graded Granular sub-base Material 4.75 mm to 2.36 mm 55 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 56 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 57 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 58 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 59 Coarse graded Granular sub-base Material 53 mm to 26.5mm 60 Stone screening material for WBM Grading-2 and 3 61 Miscellaneous Items Cement Grey PPC 62 Cement Port land (ordinary) 63 Cement white viz J.K./Birla 64 Wall Putty J.k / Birla white 65 Plaster of Parish Sakarni or eqvivalent 66 Cinder 67 Distemper oil bound 68 Dry Distemper ordinary of bes quality (Approved manufacture and approved quality viz. Burger, Asian, J&N 69 Glass Ordinary cut to size (a) 3mm thick (Wt. 7.5 Kg./sqmt.) 70 (b) 4mm thick (Wt. 10.0 Kg/sqmt.) 71 (c) 5.5 mm thick (Wt. 13.5 Kg/sqmt.) 72 White lime (unslacked) for White Washing 73 White Lead (Best Quality PIG Lead) 74 (d) G.I. Barbed wire 75 (e) Iron Sheet Galvanized Plain 22 gauge 76 (f) Iron Sheet Galvanized Plain 24 gauge 77 (g) -do- but corrugated 24 gauge 78 (h) -do- but black plain 18 gauge 79 (J) Expanded metal 2-0 cm mesh 16/17 guage 80 (K) M.S. binding wire 24 gauge 81 (i) 1x2 size of 10 gauge wire 82 (ii) 1x3 size of 10 gauge wire 83 (iii) Murga Jali 1/2x24 gauge 84 (iv) 1x2 size of 10 gauge wire 85 (i) F -d sections @ 1.58 Kg/R/M 86 (ii) F -B/T/T Secs. @ 2.40 Kg/R/M 87 (iii) F - Sections @ 0.74 Kg/R/M 88 (a) Super white 89 (b) Commercial white, coloured & black 90 Marble Dust (200 mesh) 91 Nails (Country) 92 Nails (Wire) 93 (a) Oil (linseed double boiled) 94 (b) Oil (Terpentine) 95 (a) Paint anticorosive Bitumenous 96 (b) Black Japan 97 (c) Superior Ready Mixed paints (Grade II) in 20 ltrs. Drums of approved manufactures and aporoved make 98 (i) Dark Green Oxide 99 (ii) Deep Black Oxide 100 (iii) Blue Oxide 101 (iv) Chocoiate Oxide 102 (e) (i) Red Oxide primer surface for steel (in 20 ltrs. Drum) (Approved manufactures and approved make) 103 (ii) Red lead paint ready mixed for roof (in 20 ltrs. Drum) (Approved manufactures and approved make) 104 (f)(i)PaintenamelGradeIsuperClass(Approved manufactures and approved make) 105 (ii) Paint (Aluminium) 106 (g) (i) Paint primer for wood 107 (ii) Paint primer for metal 108 (h) (i) Cement Primer of Berger or equivalent 109 (ii) Water proof cement paint (in 50 kg. drums) 110 (i) Clear synthetic (in 20 ltr drums) 111 (ii) Copall 112 (iii) Weather Coat cement paint for exterior 113 (iii) Weather Coat cement paint for exterior 114 Water Proofing compound (Dr. Fixit) 115 Polish (mansion & wax) 116 (iv) P.V.C. Pipe 110 mm dia & 6Kg./CM2 (ISI Marked) 117 (v) Same as above but 90 mm dia 118 (vi) Same as above but 75 mm dia 119 (v) Same as above but 140 mm dia 120 (a) Corrugated 121 (b) Plain 122 (i) Internal dia 5 cm (Wt. 11.41 Kg.) 123 (ii) Internal dia 7.5 cm. (Wt. 16.52 Kg.) 124 (iii) Internal dia 10 cm. (Wt. 21.67 Kg.) 125 (iii) Internal dia 15cm. (Wt. 21.67 Kg.) 126 (i) 5.0 cm dia (Wt. 2.30 Kg. ) 127 (ii)7.5 cm dia (Wt. 3.30 Kg.) 128 (iii) 10.0 cm. dia (Wt. 4.60 Kg.) 129 (i) 5.0 cm dia (Wt. 2.10 Kg. ) 130 (ii) 8.0 cm dia (Wt. 3.20 Kg.) 131 (iii) 10.0 cm. dia (Wt. 4.40 Kg.) 132 (c) C.I. Spout 23.0 cm Long 40 mm dia 133 (a) Rope (Moonj) 134 (b) Rope (HEMP) 135 (c) Rope (cotton) 136 (d) Spun yarn 137 Rivets 138 Coarse sand of approved quarry (Finess modules 2.20) at site of work in the district Saharanpur, Muzaffarnagar 139 Finesand(blendedtofineness modulus1.25) Saharanpur, Muzaffarnagar and Shamli 140 (a) Local Sand 141 Surkhi 142 White lime (slacked) 143 (a) Washers (Lumpet) 144 (b) Washers (Bitumen) 145 (c) Washers G.I. 146 J.Hooks 147 Wood presevator in 5 ltrs. Pack. 148 (a) Teak wood 149 (b) Sheesham 150 (c) Indian Sal 151 (a) Teak wood 152 (b) Sheesham 153 (c) Indian Sal/ maleshien 154 Fuel Wood (Dry) 155 (a) 2.2 cm width 156 (b) 3.50 cm. width 157 (c) Same as 48 (a) but 5 mm thick 158 (d) Same as 48 (b) but 5 mm thick 159 Antitermite treatment oil concentrate to 0.30 (as per IS 1307) 160 (i) 40mm thick 161 (ii) 50 mm thick 162 (a) KOTASTONE (machine cut ) 60 x 60 cm. 163 (a) Marble White 60 x 60 cm. 164 (b) Marble White 60 x 60 cm. 165 Granite stone black or Grey Polished 166 Granite stone black or Grey Polished 167 Polythene Sheet (125 Micron) 168 Plastic waste which is cleaned is cut into a size between 2.36mm and 600 microns and of maximum size 2.36 mm length and 2.00mm width. 169 (a) For Floor Size 300 x 300 170 (b) For Wall Size 200 x 300 171 (c) Vitrified Tiles size 600 x 600 172 RCC Hume Pipe 350mm dia 173 RCC Hume Pipe 450mm dia 174 (a) Ordinary 175 (b) For floor and tile work 176 Carpenter 177 Black Smith 178 Hammer man 179 Fitter 180 Painter 181 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 182 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 183 (b) Electrician Licensed with Kit or Koshal vikash certificate 184 (b) Electrician Licensed with Kit or Koshal vikash certificate 185 Mate 186 Beldar / Mali 187 Bhishti with Mushk 188 White Washer 189 Belder for bitumen or tar work 190 Glazier 191 Bhainsa Buggi with driver 192 Tractor trolley with driver excluding P.O.L. 193 Amin/Tracer 194 Chaukidar 195 Jeep/Truck/Tractor/Roller Driver 196 Generator Operator 197 Mixol Operator 198 Pump Operator 199 Cleaner 200 Sweeper (Full Time) 201 Sweeper (Part Time) 202 Tractor with harrow or water TankerTrolly with 203 Tractor with harrow or water TankerTrolly with 204 driver and P.O.L. 205 J.C.B. Machine with driver with P.O.L. 206 Crane (20-50 Tonnee) with Driver and P.O.L. 207 Ricksaw Thela with Driver 208 (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) 209 (a) As in item 251 (a) above but excavation in soil mixed with Moorum, shingle, kankar requiring the use of special tools and plant such as pickaxes, sabbals etc. (where machine can not move ) 210 (a) Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. (Royality removed by Govt. ) for small works/ Abadi area. (where machine can not move ) 211 (a)Add to items (251-253) for every additional 30 M. (100 ft.) lead or part of 30 M (100 ft.) or for every additional 1.50 M. (5 ft.) lift or part of 1.50 M. (5 ft.) 212 (a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measuredat a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. 213 (i) Cleaning jungle including up rooting ofrank, vegetations grass, push, wood trees and amplings of grith upto 30 cms. measured at a height of 1 M. aboveground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared. 214 (a) Same as above 259(i) above but grass only. 215 (a) Add to item no. 253 (a) for mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etc. 216 (b) As in item no. 260 (a) above but for departmental works excluding Roller charges and its fuel, cost of water, allT&P. and sundries etc. but including carriage of water to site. 217 Upto ½ Km 218 Ist Km. (If lead is beyond ½ Km.) 219 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 220 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 221 As in item 273 above but in proportion 10:5:1 222 As in item 273 above but in proportion 8:4:1 223 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 224 (b) Same as item no. 279 (a) but in proportion of 1:3:6 225 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 226 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 227 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 228 As in item 273 above but in proportion 10:5:1 229 As in item 273 above but in proportion 8:4:1 230 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 231 (b) Same as item no. 279 (a) but in proportion of 1:3:6 232 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 233 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 234 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 235 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 236 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 237 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 238 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 239 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 240 As in item 309 above but for walls of one brick thick, add for extra labour 241 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 242 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 243 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 244 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 245 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 246 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 247 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 248 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 249 As in item 309 above but for walls of one brick thick, add for extra labour 250 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 251 Teak wood wrought framed and fixed including simple mouldings, straight work as in chaukhats including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 252 As in item No. 401 but for sheesham wood 253 As in item no. 401 but with Indian Sal wood 254 Supply & fixing of 4.5 Cm. thick teak wood part panelled and part glazed door and window shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. Including fixing the glass panes with putty for bradglass and glass to be 4 mm. thick. Fitting with necessary screws to be supplied by the deptt. 255 Providing and fixing Glass panes with teak wood beading in doors and windows as desired by the Engineer incharge including cost of all materials, fittings, hinges, labour, T&P all etc. required for proper completion of the work. 256 As in item no. 409 above but fully panelled. 257 As in item no 409 above but fully glazed. 258 As in item no. 409 above but 3.8 cm. thick. 259 As in item no. 411 above but 3.8 cm. thick. 260 As in item no. 412 above but 3.8 cm. thick. 261 As in item no. 409 above but 3.8 cm. thick, Shisham wood. 262 As in item no. 411 above but 3.8 cm. thick, Shisham wood. 263 As in item no. 412 above but 3.8 cm. thick, Shisham wood. 264 Supply and fixing of 3.8 cm. (1½) thick Teak wood door and window shutters with panels of heavy Quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm. (1/10 or 1/12 or 1/16 inch) mesh or any other size, with necessary beadings, including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including two coat of black Japan on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. 265 As in item (450) above but in shisham wood. 266 Supply and fixing Galvanized Mosquitos proof heavy quality S.S.Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3x3/8)/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. 267 As in item (455) above but with shisham wood battens. 268 As in item (455) above but with Indian Salwood battens. 269 As in item (455) above but with Deodar wood battens. 270 As in item no. 409 but Indian Commercial flush shutters 35 mm. thick (excluding cost of all fitting). 271 As in item no. 409 but Indian Commercial flush shutters 32 mm. thick (excluding cost of all fitting). 272 As above 471 but Double Leaf Add. extra. 273 Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) 274 As above item no. 473 Aluminium Fittings ISI marked. 275 Supply and fixing of 3.8 cm. (1½) thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings 276 Supply and fixing 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fitting and glass panes (Double Leaf) 277 As in item no. 9.26 above but for single leaf. 278 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 279 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 280 As in item no. 9.29 above but for single leaf. 281 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 282 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 283 As per item above A but with shisham wood batton 284 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 285 Fixing of Curtain rods (Labour only) 286 Fixing of Curtain palmets (Labour only) 287 50x20 mm 288 50x12 mm 289 With 2nd class teak wood beading 62X19 mm. 290 300x16 mm 291 250x16 mm 292 250x10 mm 293 200x10 mm 294 150x10 mm 295 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 296 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 297 As in item no. 9.29 above but for single leaf. 298 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 299 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 300 As per item above A but with shisham wood batton 301 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 302 Fixing of Curtain rods (Labour only) 303 Fixing of Curtain palmets (Labour only) 304 50x20 mm 305 50x12 mm 306 With 2nd class teak wood beading 62X19 mm. 307 300x16 mm 308 250x16 mm 309 250x10 mm 310 200x10 mm 311 150x10 mm 312 250x10 mm 313 200x10 mm 314 150x10 mm 315 100x10 mm 316 125 mm 317 100 mm 318 75 mm 319 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI C sections (39mm x 19mm x O.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric L corners .The panel shall be filled with 3mm thick high - pressure compact laminate asper manufacturers specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). 321 With decorative veneering on one side and commercial veering on other side. 322 With non decorative veneering on both sides. 323 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 324 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 325 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 326 Same as in items 502 above but steel Z Section window excluding Glass panes.(ii) Openable panels 327 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 328 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 329 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 330 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 331 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 332 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 333 with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 334 As per item no 517a but with steel strip inplace of angle iron. 335 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 336 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 337 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 338 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 339 providing and fixing top cover for rolling shutters 2.50 meter wide. 340 Providing and fixing ball bearing for rolling shutters. 341 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 342 (b) Shutters above 16.8m² (180 sqft) area 343 (i) Door chaukhat 344 (ii) window chaukhat 345 (iii) Ventilator chaukhat 346 (iv) Stair case Nosing 347 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 348 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile B 349 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile C 350 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile E 351 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 352 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 353 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 354 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 355 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 356 Same as in items 502 above but steel Z Section window excluding Glass panes. (ii) Openable panels 357 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 358 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 359 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 360 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 361 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 362 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 363 Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 364 As per item no 517a but with steel strip inplace of angle iron. 365 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 366 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 367 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 368 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 369 providing and fixing top cover for rolling shutters 2.50 meter wide. 370 Providing and fixing ball bearing for rolling shutters. 371 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 372 (b) Shutters above 16.8m² (180 sqft) area 373 (i) Door chaukhat 374 (ii) window chaukhat 375 (iii) Ventilator chaukhat 376 (iv) Stair case Nosing 377 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 378 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B 379 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 380 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E 381 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 382 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 383 Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. 384 Same as in item 574 above but Flush pointing Deduct from item 574. 385 Same as in item 574 above but in floors deduction from item 574 & 575. 386 Struck cement pointing with 1:2 cement and fine sand of 1.25 F.M. mortar with colouring including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 387 12 mmthick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. 388 As in item (582) above but with cement and approved coarse sand mortar in 1:3. 389 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:4. 390 As per Item No. 584 but with 1:4 cement and Corse sand 391 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:6. 392 Add for extra labour to all item of plaster if done ceiling. 393 Add for extra labour and materials for plaster over rough face of one brick wall. 394 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3 mm floating coat of neat cement or cement mixed with marble dust in ratio 5:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 395 Same as above item but 1.20cm. thick instead of 2 cm thick. 396 Engraving lines in plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-incharge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (add for extra labour to all items of plaster), 397 Marking drip coarse in sun shades or facie with 1:3 cement and fine sand mortar as per direction of Engineer-in-charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 398 20 mm thick rough cast exterior cement plaster on walls consisting 10 mm thick backing cast of 1:3 cement mortar (1 cement :3 coarse sand) and 10 mm thick finishing coat of 1:3 cement mortar (1cement :3 coarse aggregate of size 6mm to 12 mm ) including arises, chamfers and/or rounded angles not exceeding 80 mm. 399 2.5 cm (1) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1) graded approved stone grit, laid in panels finished with 3 mm. (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3) thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 400 (A) As in item no. 601 above but without base concrete. 401 (B) As in item no. 601 above but base concrete consisting of brick ballast and fine sand & cement in prop. 12:6:1 402 As in item (601) above but floor shall be 4 cm (1½) thick instead of 2.5 (1) thick and without base concrete. 403 Add in item (601) to (603) and (605) when floors are polished including supply of extra cement, chapra batti, Carborandum stone, all other materials, labour, Tools & plants etc. required for proper completion of the work. Marble dust shall be added in the floting coat in ratio of 5:1 (cement and marble dust) if necessary but no extra amount will be paid for it. This includes final finish with french mansion polish or any other approved polish. 404 M-150 Brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming including supply of all materials labour and Tools and Plants etc. required for proper completion of the work. 405 As in item (615) above but bricks laid flat. 406 Granolithic marble flooring 2.5 cm. (1) thick consisting of 2 cm. (3/4) thick layer of 1 part cement, 2 parts of approved coarse sand and 4 parts of 2 cm. (3/4) graded approved stone chips including 5 mm (¼) thick surface coat with ordinary cement, black and white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 1.5 mm. (1/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-incharge and polished by hand or machine and finally finished with French Mansion Polish or any other approved polish and including 8 cm (3) 1:6:12, concrete base, including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work 407 As in item (620) above but when white cement is used in top 5 mm (¼) layer. 408 As in item no. (620) above but when coloured floors are to be made. 409 Granolithic marble dado 2 cm. (¼) thick consisting of 15 mm. (9/16) thick layer of one part cement, 2 parts of approved coarse sand including 5 mm. (3/16) thick surface coat with ordinary cement black or white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 15 mm. (9/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-in- charge and polished by hand or by machine and finally finished with French Mansion Polish or any other approved polish including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work. 410 Same as item no. 625 above but 12 mm. thick dado. 411 As in item (625) above but when white cement is used in top 5 mm. (3/16) thick layer instead of ordinary cement. 412 As in item (625) above but when coloured dados are to be made. 413 Supply and fixing 6 mm. (¼) China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants 414 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (a) of 2.2 cm. depth 415 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (b) of 3.5 cm. depth 416 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (c) of 2.2 cm. depth and of 5 mm thickness 417 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete(d) of 3.5 cm. depth and of 5 mm thickness 418 Extra for making chequers of approved patterns on cement concrete, floor, steps landing etc. 419 Supply and fixing of Kota stone in floor ing 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 420 As in item no. New item (1) above but 25 mm thick. 421 Supply and fixing 10 to 12 mm thick Kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 422 Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work. as per direction of Engineer - in- charge 423 Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. 424 As in item (641) above but for every coat after first coat. 425 As in item (642) above but for every coat on previously painted old wood or Iron work including its sand papering, rubbing and cleaning as required for proper completion of work. 426 Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 427 As in item (644) above but for every coat after the first coat. 428 As in item (645) above but for every coat over previously painted surface 429 Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 430 As in item (647) above but for every subsequent coat on previously treated surface . 431 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 432 As in item (649) above but for every coat after the first coat. 433 As in item (649) above but for every coat after the previous coat or subsequent coat. 434 One coat hot coaltar on new surface including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 435 As in item (652) above but for every coat after the first coat or on previously treated surface. 436 One coat surface or other approved preservative on new wood work, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 437 As in item (654) above but for every coat or on previously treated surface. 438 Oiling wood work with double boiled linseed oil including supply of all materials labour, Tools & plant etc. required for proper completion of the work. 439 Removing paint or varnishing with paint remover or with caustic Soda, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 440 Polishing with French Polish or wax polish (in proportion 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by weight) on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth and a coat of wood filter including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 441 As in item No. (658) above but on previously polished wood or wood based surface. 442 Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 443 Same in item no. (660) but for each coat of water proof cement paint after the first two coat to give an even shade 444 Finishing wall with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 445 Same aas item 660 but for weather coat. 446 Sameaasitembut over previouslypainted surface weather coat. 447 Providing cement primer on old/new surfaces 448 Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 449 Providing wall putty on old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 450 White washing one coat including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 451 As in item 671 above but Two coats. 452 As in item 671 above but Three coats. 453 Colour washing one coat using approved. Colouring material buff, blue, gray or brown shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 454 As in item 674 above but two coats. 455 As in item (674) but using approved colouring material of pink, green or yellow shade. 456 As in item 676 above but two coats. 457 As in item (674) above but colour washing with copper or iron sulphate one coat. 458 As in item 678 above but Two coat. 459 Cement washing including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 460 One priming coat and one coat of dry distemper on new work including supply of all materials, labour, Tools & plant etc. reqired for proper completion of work. 461 As in item (681) but for each coat of distemper after the first coat 462 Dismantling sundries brick work including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 463 Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). 464 As in item (692) above but in mud mortar. 465 Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 466 Dismantling Jack arched or wooden beam and barga roofs including beam, roof concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 467 As in item (695) above but only roof concrete. 468 Dismantlingcementconcreteorbrickor granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 469 As in item (697) above but floor to be stone flagged or tiled floor. 470 Dismantling corrugated Iron roofs walls or partitions,includingpurlins,battensand vertical supports and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 471 Dismantling of girders, trusses and other steel work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 472 Dismantling doors or windows including chaukhats with hold fast and including stacking of materials as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 473 Dismantling doors or windows leaves including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 474 Dismantling doors or windows including chaukhats but excluding hold fast and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 475 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 476 Raking out joint of brick work in cement or lime morter to a depth 1 cm. (3/8) including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 477 Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 478 Supply and fixing of 10cm. (4) internal dia A.C. down pipes Everest or charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3mm. (1 x1/8) fixed to walls with cement motar (1:2) and including supply of 15 cm (6) long 6mm. (1/4) dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. 479 As per item No. 730 above but for 10.0 cm. PVC down pipe.(kissan/suprime make) 480 As per item No. 730 above but for 7.5 cm. PVC down pipe. .(kissan/suprime make) 481 As per item No. 730 above but for 5.00 cm. PVC down pipe..(kissan/suprime make) 482 Providing and injecting chemical for preconstruction anttermite treatment and creating and chemical barrier under and around the column pits wall trenches basement excavation top surface in plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrounding or pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 (part II 1981) Aldrine emulsifiable concentrate or any other approved material such as heptachlor of chlordane will be used. The rate of application of chemical emulsion shall be as follows :- 1.Treatment for massonary and foundation 5 liters per sqm. 2.Back fill in immediate contact with foundation 7.5 liters per sqm. 3.Treatment of surface of plinth filling 5 liters per sqm. 4.Treatment of soil along external perameter of Building 7.5 liters per sqm 5. Treatment of soil under external parameter 5 liters per sqm. 483 Providing & injecting chemical for post Constructional anti termite treatment with drilling holes at junction of floor with walls & pillars, the application of chemicals shall be as per relevant I.S. code and the rate of application of chemical shall also be as provided in the I.S. code, including quarterly inspection and providing required treatment for one year. As direction by the Engineer-in-charge. 484 Consolidation of Kankar by hand rammer including opening out stacks sorting kankar into three sizes, repairing patches in existing road suface with kanker making medhi to retain water and ramming and also including carriage of metal upto 30 meters (100 ft.) carriage of water 200 metre supply and maintenance of barriers and all tools and plants required for proper completion of work, kankar to be supplied to the contractor free at site. 485 (A) As in item No. 752 above but 12 cm. (loose) thick coat of stone ballast. 486 (B) As in item No. 755 (a) above but excluding roller charges. 487 (D) As in item No. 755 (a) above but upto 10 cm. (loose) thick coat. 488 (E) As item No. 755 (b) above but upto 10cm. (loose) thick coat. but excluding roller charges. 489 Water allowance to be allowed on item No. 751 to 756 including carriage & cost of water where water is not available at site. 490 Dag belling 15cm (6) deep in one line aligned with flags and jhandies as directed by Engineer- in-charge. 491 Painting white/coloured traffic lines 8-15 cm. wide in three coats with approved road making paint (spirit base) as directed by the Engineer- incharge, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 492 Painting on divider 1 priming and two coats of enamel paint including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 493 As per item above but every coat after Ist coat and on old surface 494 Brick soling with strainght over burnt bricks laid flat and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8) depth of local earth over the entire surface and including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. 495 As in item No. 762(a) above but with bricks laid on edge. 496 M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8) depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. 497 Renewing patries 1.5 metere wide including dressing surface filling upto 8cm (3) depth and making namunas, at every 15 metre apart on either side of the road true to patri template with side slopes of 1:2 etc. trenches for taking the earth to be so dug that they form a continuous side drain at road boundary. 498 Brick lining on both side of the road of M-150 bricks 7 cm. wide. 11 cm. deep, laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in-charge. 499 Cleaning the existing painted /primed surface and laying premix 2cm. (3/4) thick over a tack coat with graded approved grit and bitumin (labour only) including heating the paint and grit to the required temperature and mixing either in mixer/ hand drum or by manual including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge . including labour charges for tack coat. 500 As in item No. 781 above excluding T&P and sundries etc. for departmental works. 501 As in item No. 781 above but in Patches. 502 As in item No. 781(a) but in Patches. 503 Cleaning the premix surface and laying seal coat with approved 6mm (1/4) graded grit and bitumin (labour only) including heating the paint to the required temperature and mixing either in mixer, hand drum including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge including all T&P and sundries to be arranged by the contractor but exculding roller charges and fuel wood. 504 As in item No. 783 above but in Patches. 505 Providing and applying primer coat over prepared surface of granular base with slow setting bitumen emulsion with spray set including cleaning of W.B.M. surface spreaying primer @ 0.6 kg/sqm (excluding emulsion) all labour T & P etc. as per MORT&H Specification. (labour rate only) in patches 506 Brick soling with straight over brunt bricks laid flat and dry (labour only) including preparation of subgrade to prescribed camber, filling joints with local earth spreading a blinding coat 1 cm (3/8) depth of local earth over the entire surface and including labour T&P etc.required for proper completion of the work.. 507 As in item No. 785 above but with bricks laid on edge. 508 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(i) 350 mm dia 509 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE (ii) 600 mm dia 510 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iii) 800 mm dia 511 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iv) 900 mm dia 512 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(v) 1000 mm dia 513 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work, (i) 350 to 600 mm dia 514 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work(ii) 800 to 1000 mm dia 515 (a) Laying and Consolidation of stone ballast in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 516 (b) Laying and Consolidation of Brick ballast/ bats in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 517 Barricating with approved wooden ballies vertical 10cm. Dia and 2m long fixed in ground 45 cm Deep and 2m apart including 2 rows of horizontal ballies not less than 8cm Dia 45 cm apart centre to centre tied by narial rope including cartage of all material and also including hire charges of ballies complete as direction of Engineer In charge. For two days 518 As item above but for more than 02 days. 519 As per item above but with three rows of horizontal ballies. 520 Dismantling of old brick laid on edge kharanja including stacking of old bricks . 521 As per item above but bricks laid flat / C.C. Interlocking tiles 522 Providing & laying of hot applied thermoplastic compound 2.5 m.m. thick including reflectorising glass beads @ 250 gms./Sq.mt. area. Thickness of 2.5 mm. inclusive of surface applied glass beads as per I.R.C. 2.35. The finished surface must be level, uniform and free from steaks and holes.Supplying & laying of Empty cement bags 523 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 524 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 525 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 526 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 527 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 528 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 529 Providing and laying of interlocking concrete Block pavement having thickness 60 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 530 Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 531 Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 532 Providing & supply gunny bags including cost of sand and stitching of bags and laying in position. 533 Laying of interlocking tiles (labour only) 534 Disposal or malba 535 primaxing carpet 20 mm 536 seal coat 537 earth work in filling 538 45-90 mm gauge stone ballast 539 53-22.4 mm gauge stone ballast 540 stone screening meterial 541 mild steel for rcc work 542 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes 543 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargeb) 20 mm dia. nominal outer dia Pipes 544 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargec) 25 mm dia. nominal outer dia Pipes 545 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charged) 32 mm dia. nominal outer dia Pipes 546 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargee) 40 mm dia. nominal outer dia Pipes 547 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. a) 15 mm dia. nominal outer dia Pipes 548 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. b) 20 mm dia. nominal outer dia Pipes 549 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. c) 25 mm dia. nominal outer dia Pipes 550 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. d) 32 mm dia. nominal outer dia Pipes 551 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineerin- Charge. External work.. a) 15 mm dia. nominal outer dia Pipes 552 b) 20 mm dia. nominal outer dia Pipes 553 c) 25 mm dia. nominal outer dia Pipes 554 d) 32 mm dia. nominal outer dia Pipes 555 e) 40 mm dia. nominal outer dia Pipes 556 f) 50 mm dia. nominal outer dia Pipes 557 g) 62.50 mm dia. nominal outer dia Pipes 558 h) 75 mm dia. nominal outer dia Pipes 559 i) 100 mm dia. nominal outer dia Pipes 560 j) 150 mm dia. nominal outer dia Pipes 561 Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer-in- charge. a) 15 mm nominal bore 562 b) 20 mm nominal bore 563 Providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. a) 15 mm nominal bore 564 b) 20 mm nominal bore 565 Providing and fixing ball valve (brass)ISI marked approved quality complete , High & low pressure with plastic floats complite as per direction of Engineer-in-charge.High or low pressure with plastic floats: a) 15 mm nominal bore 566 b) 20 mm nominal bore 567 c) 25 mm nominal bore 568 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 a) 15 mm nominal bore 569 Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms. a) 15mm nominal bore. 570 Providing and fixing C.P. brass stop cock (concealed) of approved quality confirming to ISI standards IS 8931 a) 15mm nominal bore. 571 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 a) 15 mm nominal bore 572 Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in- charge. 573 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White glazed earthen ware(Indian Type)/Neycer W.C. Pan 580 mm Dia. 574 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 575 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern 576 Single half stall urinal with 5 litre PVC. automatic flushing cistern 577 Range of two half stall urinals with 5 litre PVC. automatic flushing cistern 578 Range of three half stall urinals with 10 litre PVC. automatic flushing cistern 579 Range of four half stall urinals with 10 litre PVC. automatic flushing cistern 580 Single squatting plate with 5 litre P.V.C. automatic flushing cistern 581 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern 582 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern 583 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps 584 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 585 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 586 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 587 White Vitreous China Angle back wash basin of size 600x480 mm with single 15 mm C.P. brass pillar tap 588 White Vitreous China Angle back wash basin of size 400x400 mm with single 15 mm C.P. brass pillar tap 589 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 590 Providing and Fixing while vitreous china pedestal for wash basin completely at the back for the reception of pipes and fittings. 591 ProvidingandfixingStainlessSteelAISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 592 510x1040 mm bowl depth 250 mm 593 510x1040 mm bowl depth 225 mm 594 510x1040 mm bowl depth 200 mm 595 470x420 mm bowl depth 178 mm 596 Long pattern W.C. pan size of 580 mm 597 Orissa pattern W.C. pan size 580x440 mm 598 Providing and fixing water vitreous china pedestal type (Eurepean type/wash down type) 599 Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer–in- charge 600 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete.10 litre capacity – white 601 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white 602 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete. Semi rigid pipe 32 mm dia / 40 mm dia 603 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 604 Providing and fixing soil, waiste and vent pipes: 100 mm dia Sand cast iron S&S as per IS - 3989 605 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 606 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 75 mm dia meter 607 Sand cast iron S&S as per IS - 1729 608 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 609 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 610 Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand): 100 mm dia 611 75 mm dia 612 50 mm dia 613 White vitreous china dual purpose W.C. pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend ISI Mark Kajaria eqvilent Indian made Brand. 614 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/6 litre (adjustable to 4 litre/ 8 litre), including seat cover and cistern fittings, nuts, bolts and gasket etc complete. ISI Mark Kajaria eqvilent Indian made Brand. 615 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design. 100x100 mm size P type 616 with common burnt clay (non modular) bricks of class-150 150x100 mm size p type 617 with common burnt clay (non modular) bricks of class-150 618 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg 619 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg 620 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450 mm internal dimensions 621 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 450 mm internal diameter 622 Square shape 450 mm internal dimension 623 Circular shape 500 mm internal diameter 624 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg 625 Providing and fixing toilet paper holder standrad size ISI marked C.P. brass as per direction Engineer-in-charge 626 Painting letters upto 2.5 cm. size including supply of all materials, labour & tools and plants etc. required for proper completion of the work. 627 As in item 817 above but size above 2.5 cm. but upto 8 cm. 628 As in item no. 817 above 8 cm. but upto 15 cm. 629 Repairing letters upto 2.50 cm. size including supply of all meterials labour and tool and plants etc. required for proper comletion of the work 630 As in item NO. 820 above but size above 2.5 cm. but upto 8 cm. 631 As in item NO. 820 above but size above 8 cm. but upto 15 cm. 632 Painting Border line upto 2.5 cm. wide 633 Painting Border line upto 2.5 cm. to 5 cm. wide 634 Re-Painting Border line upto 2.5 cm. wide 635 Re-Painting Border line upto 2.5 cm. to 5 cm. wide 636 Repainting and relettering number plates on ends of parapets of culverts and bridges and boader line in letters height from 2.5 cm. to 8 cm. with approved enamael paint of superior quality including supply of all materials, labour and T & P etx. required for proper completion of the work. 637 Repainting and relettering of K.M. stones as per IRC design (except 5th km. Stone) with approved enemal paint of superior quality including supply of all materials, labour and T & P etc. required for proper completion of the work. 638 As in item 832 above but 5th km. stone 639 As in item 832 above but 200 H.M. stone 640 Varnishing /Painting on chair /side rack with stand and such other items including all matrial labour T&P etc. complite for proper completion of the work. 641 Varnishing /Painting on Double bed including all matrial labour T&P etc. complite for proper completion of the work. 642 Varnishing /Painting on Singal bed/ Sofa/ Dining table including all matrial labour T&P etc. complite for proper completion of the work. 643 Cutting and repairing of walls or windows for fitting of window type A.C. inculding wooden bidding after fixing. 644 White washing and hirmichi washing of culverts and trees upto a distance of 5 M. from the edge of black top in three bends of 1 width at a height of 1 M. from the crown of the road on either side of road. including supply of all materials, labour, T & P etc. required for proper completion of the work. 645 (a) Same as above but with departmental labour 646 Retro-Reflectorised Traffic Signs Direction and place identification signs up to 0.90 sqm Size BoardProviding and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 647 Direction and place identification signsMore then 0.90 sqm Size Board Providing and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 648 Retro Reflective Signs (Type-IV Sheet) for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM. D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 649 Retro Reflective Signs (Type-IV Sheet) for both side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 650 Retro Reflective Signs (Type-IV Sheet) for both side ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 651 Retro-reflectorised Traffic sign as per IRC 67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. a) 90 cm equilateral triangle with diffinitation plate size (20 cm x 60 cm) 652 b) 60cm equilateral triangle with diffinitation plate size (20cm x 60cm) 653 c) 60 cm Circular with diffinitation plate (20 cm x 60 cm) 654 d) 80mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 655 e) 60mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 656 f) 60 cm x 60 cm square with diffinitation plate ( 20 cm x 60 cm) 657 g) 90 cm high octagon 658 h) 50 x 60 cm single chevron 659 i) 155 x 60 cm Double chevron 660 j) 30 x 90 cm (Left/Right) Object Hazard 661 k) 45 x 90 cm two way Object Hazard 662 l) 30 x 90 cm +45 x 78 cm Guarded/unguarded Railway crossing 663 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of work. 664 Supply, fixing and hoisting of 6.00-7.00 m. spanCantilever Structure in position with one vertical post of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffners & two nos. 8 mm thick MS plates at top welded with structure of 40 mm NB (M) pipe comprising of horizontal, vertical & bracing pipe of 32 mm NB (M) as per structural design requirements & approved drawing with vertical & lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coats of synthetic enamel paint on the whole structure & installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and R.C.C. 1:2:4 with cement, coarse sand and approved 20 mm grit complete for fixing the complete structure in position as per direction of E/I charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the signage structure inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of the work. 665 Supply, fixing and hoisting of 12.00 - 15.00 M span Overhead Structure in position with two vertical posts of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffeners & two nos.10 mm thick MS plates at top welded with structure of 50 mm NB (M) pipe comprising of horizontal, vertical pipe of 40 mm NB (M) and bracing pipe of 32 mm NB (M) as per structural design requirements and approved drawing with vertical and lateral clearance given in clause 802.2 and design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of the work. 666 Reflective Raised Pavement Marker Providing and fixing of raised 667 Reflective Raised Pavement Marker with shanks Providing and 668 Supplying & fixing of Linear Delineator System (LDS)panels made of Micro prismatic Retro Reflective sheeting Type XI duly laminated on thin aluminium foil to a unique corrugated shape to provide retro reflection across wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing Concrite / brick work with 16 Nos Fastner/ screw as per IRC 79-2019 -Rates are inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of work. 669 Providing & fixing of Bollard made (Single side) out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty,etc all T&P/machine material and labour required for proper completion of work. 670 Supply & fixing of Bollard (Double side) Made out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd. fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of work. 671 Metal Beam Crash Barrier 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 672 Metal Beam Crash Barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2.0 m high, 1.5 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete 673 TREE PLATE S/F Reflective tree plate having Size 15 Cm x15Cm, Consisting type XI sheeting over 1.5mm thick aluminium sheet including labour. Material T&P etc for proper completion of the work. 674 Cartage of Ballast, Kankar, Coal, Grit or Sand etc. including loading and unloading but excluding stackings on pucca roads. I st Km. 675 2 nd Km. 676 3 th Km. 677 4 th Km. 678 5 th Km. 679 6 th Km. 680 7 th Km. 681 8 th Km. 682 9 th Km. 683 10 th Km. 684 11 th Km. 685 12 th Km. 686 13 th Km. 687 14 th Km. 688 15 th Km. 689 16 th Km. 690 17 th Km. 691 18 th Km. 692 19 th Km. 693 20 th Km. 694 21 th Km. 695 22 th Km. 696 23 th Km. 697 24 th Km. 698 25 th Km. 699 26 th Km. 700 27 th Km. 701 28 th Km. 702 29 th Km. 703 30 th Km. 704 31st to 75 Km. 705 76st to 100 Km. 706 100st to 200 Km. 707 As in item (231) above but for cement, steel or other materials : Ist Km. 708 2nd and 3rd Km. 709 4th and 5th Km. 710 6th to 10th Km. 711 11th to 20th Km. 712 21st to 30th Km. 713 31st to 50th Km. 714 51 to 75 Km. 715 76th to 100 Km. 716 101st to 200 Km. 717 201st to 250 Km. 718 As in item (231) above but for tar, bitumen Asphalt, Mobile oil or other such materials 1st Km. 719 2nd and 3rd Km. 720 4th and 5th Km. 721 6th to 10th Km. 722 11th to 20th Km. 723 21st to 30th Km. 724 31st to 50th Km. 725 51st to 75 Km. 726 76th to 100 Km. 727 101st to 200 Km. 728 201st to 250 Km. 729 Cartage of brick/stone ballast, kankar coal shingle or sand etc. by head load upto 90 metres (3 chains) including loading and unloading but excluding stacking 730 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (a) Loading 731 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (b) Unloading 732 Unloading of cement, tar or bitumen drum lighter steel sections and other such materials from wagons and stacking the same on platform. 733 As in item No. 236 (a) above but for heavy articles like joist etc. machinery and unwieldly structures 734 Stacking of bricks on edge in row of two to a height of ten brick and in a length of 100 bricks after dressing levelling of the site as required where bricks are to be stacked. 735 Stacking of coal, surkhi, sand, lime, stone grit, stone/brick ballast & boulders etc. to the required sizes to stacks after necessary dressing of site where such materials are to be stacked. 736 237 (a) above but when the materials are either cement / steel. 737 Loading of cement, tar or bitumen drums, lighter sections of steel and other such materials into wagons. 738 As in item 238 (a) above but for heavy articles like joist, machinery and unwieldly structures. 739 Cartage of R.C.C. Hume pipe 30cm. to 46cm. dia and 1.8 meter to 2.5 metre in length (including collars for which nothing extra will be paid ) including loading and unloading. 1st Km. 740 2nd and 3rd k.m. 741 4th and 5th k.m. 742 6th to 10th k.m. 743 11th to 20 th k.m. 744 21st to 30 th k.m. 745 31st to 50 th k.m. 746 51st to onward k.m. 747 As in item No. 239 (c) above but for R.C.C. Hume pipe 50 to 95 cm. dia and 1.8 meter to 2.5 meter in length carriage to be done by truck or by thela. 1st Km. 748 2nd and 3rd k.m. 749 4th and 5th k.m. 750 6th to 10th k.m. 751 11th to 20 th k.m. 752 21st to 30 th k.m. 753 31st to 50 th k.m. 754 51st to onward k.m.
Contract Date: Jun 15, 2026 Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 10
Uttar Pradesh View Result →
45.
Educational and Research Institute #11277941 Technical Bid
Tender For Purchase Of Lab Equipments-- 1 Purchase Of Lab Equipments 2 Acidity Test Kitspecifications:Ethyl Alcohol Sodium Carbonate Solution Universal Indicator Solution Laboratory-Grade Test Tubes Droppers Colour Comparison Chart For Test Result Comparison Chemicals Supplied In Labelled Containers With Safety Instructions Suitable For Laboratory Educational And Testing Applications 3 Single Phase Resistive Loadspecifications:Type: Single Phase Loading Rheostat Power Rating: 5 Kw Supply: 230 V Ac, Single Phase, 50 Hz Total Number Of Load Steps: 8 Approximate Dimensions: 18 × 18 × 22 Inches (L × B × H) Comprising Electrical Load Resistors Suitable For Laboratory Loading Applications Resistors Shall Be Special Cement-Insulated Type Mounted On Powder-Coated Ms Panel/Enclosure Individual On/Off Rotary Switches Provided For Load Selection Mounted On Rubber Wheels/Casters For Portability 4 Three Phase Resistive Load Specifications:Rating: 5.25 Kw Supply: 415 V Ac, 3-Phase, 50 Hz Total Number Of Load Steps: 6 Main Switch To Be Provided Approximate Dimensions: 18 × 18 × 22 Inches (L × B × H) Comprising Special Cement-Insulated Electrical Load Resistors Mounted On Powder-Coated Ms Panel/Enclosure Individual On/Off Rotary Switches For Load Selection Mounted On Rubber Wheels/Casters For Portability Suitable For Laboratory Load Testing Applications Proper Insulation, Ventilation, And Earthing Arrangement To Be Provided 5 Three Phase Capacitor Bank Specifications: 3-Phase Capacitor Bank Rating: 2 Kvar Voltage: 440 V Ac Frequency: 50 Hz Heavy Duty Self-Healing Capacitor Units Powder Coated Ms Enclosure Compact Panel Mounted/Floor Mounted Construction Proper Ventilation Arrangement To Be Provided Capacitor Duty Contactor/Switch To Be Provided Fuse/Mcb Protection To Be Provided Discharge Resistors To Be Provided For Safety Proper Earthing Arrangement Provided 6 3 Phase Auto Transformer Starter Specifications: 3-Phase Variable Autotransformer Input: 415 V Output: 0–470 V Ac (Continuous) Current: 15 A Copper Wound, Carbon Brush Type Heavy Duty Toroidal/Core Construction Mounted In Powder Coated Ms/Crca Enclosure Front Panel Mounted Voltage Control Knob With Scale Indication Proper Insulated Terminals Provided Floor/Bench Mounted Type Suitable For Laboratory Use Input / Output Terminal Arrangement Provided Mcb/Fuse Protection Provided Proper Earthing Terminal Provided Ventilation Arrangement For Heat Dissipation 7 3 Floor Lift Interfacing Model Specifications: Type: Table-Top Lift Model Floors: 3 Levels Structure: Transparent Acrylic / Ms Frame Cabin: Moving Lift Car With Guide Rails Drive: Dc Geared Motor / Stepper Motor Motion: Up/Down Movement, Floor Indication Leds (1, 2, 3) Direction Indicators (Up/Down), Start & Stop Atevery Stage, Over Load Limit Control Three-Floor Lift Operation Plc Interfacing And Programming Floor Selection Logic Automatic Stopping At Floors Direction Indication System Educational Demonstration Of Elevator Automation 8 Mcb Elcb Trainer Kit Specifications: 1 Phase/3 Phase, 2/3/4 Pole, 3A-16A Single Pole Mcb 2-5Amps Two Pole Elcb 30Ma Lamp Load Single Phase 5Amps Panel Enclosure And Terminal Outlets 9 Signal Generator Specifications: Frequency Range: 0.1 Hz To 5 Mhz. Display: 4 To 6 Digit Led Display Output Waveforms: Sine, Triangle, Square, ± Pulse, ± Ramp. Amplitude: 0 – 20 Vp-P. Rise Time: 10 Dso Specifications: Bandwidth: 50 - 100 Mhz. Sampling Rate: 1Gs/S. Channels: 2 (Minimum) Power Supply: 100V–240V Ac, 50-60 Hz Automatic Measurement: Vpp, Vavg,Rms, Frequency, Period, Vmax, Vmin, Rise Time, Fall Time, + Width, - Width, +Duty, - Duty Etc., Horizontal Scale: 5 Ns/Div – 50 S/Div Or Equivalent Vertical Resolution: 8 Bits (2 Channels Simultaneously) Vertical Sensitivity: 1 Mv/Div – 10 V/Div (At Input) Waveform Math: +, -, X , ÷, Invert, Fft Etc., Waveform Storage: 16 Waveforms Or Equivalent Communication Interface: Usb Host, Usb Interface. 7-Inch Color Display Or Equivalent Input Impedance - 1 Mω ±2%, // 20 Pf 2 × Passive Probes (1X/10X) 11 Pwm Based Step Down Dc Chopper Using Mosfet/Igbt Kit Specifications: Pwm Based Step-Down Dc Chopper (Buck Converter) Power Device : Power Mosfet / Igbt Based Switching Circuit Input Supply : 24 V Dc To 110 V Dc Or Derived From 230 V Ac Mains Through Rectifier Unit Output Voltage :(0 To Vin) Variable Dc Output Current : Up To 5 A Dc Maximum With Suitable Load Resistor (R Load) Pwm Duty Cycle Control Provided Pwm Generation And Control Circuit Inbuilt Gate Driver Circuit Provided 12 Dual Output Regulated Dc Variable Power Supplyspecifications: • Input Voltage: 230V/50 Hz Ac. • Output Voltage: (0–30)V Dc. • Output Current: (0–2)A Dc. • Protection Circuit: Over Voltage, Over Current, And Short-Circuit Protection. • High Efficiency: Greater Than 85%. • Low Ripple And Noise: Less Than 50 Mv. • Digital Display. 13 8051 Micro Controller Kit Specifications: • Operating Voltage: +5 V Dc. • Flash Memory: 4 Kb (At89C51) / 8 Kb (At89S52). • Ram: 128 Bytes Internal Ram. • 16 × 2 Alphanumeric Lcd Display. • Push Buttons / Tactile Switches. • Dip Switches For Digital Input. • Inbuilt Adc Interface: Ldr, Potentiometer. • Inbuilt Dac Interface. • Inbuilt Stepper Motor Driver With Stepper Motor. • Inbuilt Dc Motor Driver With Dc Motor. • 1 × 4 Led Array, 1 × 4 Keypad, 1 × Relay. • 1 × Buzzer, 16 × 2 Lcd Display, 1 × Pwm Driver. • 1 × Hardware Interrupt Key, Inbuilt Rtc. • Inbuilt Eeprom And Uart Module. • 4 × 7-Segment Display. • Supports Both Assembly And C Language Programming. • Pc Interfaceable. 14 Stepper Motor Drive Kit Specifications: Working Model 8051 Micro Controller Kit Capable For Stepper Motor Drive Kit 15 Digital Trainer Kit Specifications: 5V Dc, 1A Regulated Power Supply ±12V Dc / ±15V, 200 Ma Regulated Power Supply Solderless Breadboard To Accommodate 8 × 16-Pin Ics, Zif (Zero Insertion Force) Ic Sockets Logic Input And Output Leds For Output Monitoring 16 Buffered Led Outputs 16 Debounced Switch Inputs Variable Clock Generator: 0.5 Hz To 50 Hz Single Pulse Output: 100 Ms (Buffered, Positive And Negative Outputs) One Seven-Segment Display With 4 Bcd Inputs Built-In Logic Probes Built-In Logic Switches Manual Clock: Debounced Push Button (One Pulse Per Press) 16 8 Bit Adc/Dac Interface Boardspecifications: • Thermistor / Lm35 Input In One Channel. • Variable Input (0–5) V In Another Channel. • 8 Leds For Digital Output Indication.• Necessary Control Signals Provided For Adc0809. • 8-Bit Dac Using Dac0808. • 8-Bit Digital Input From Controller. • Single-Channel Dac Output:(0–10) V. • Power Supply:±12 V Or ±15 V For Analog Circuitry Please Enable Macros To View Boq Information = Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Tamil Nadu View Result →
46.
Educational and Research Institute #11277939 Technical Bid
Tender For Purchase Of Lab Equipments-- 1 Purchase Of Lab Equipments 2 Four Stroke Petrol Engine Test Rig Specifications: Single Cylinder, 4-Stroke Spark Ignition, Petrol Engine. Air Cooled Rope Brake Arrangement With Spring Balance For Loading . Speed :1500 – 3500Rpm Power 3 Hp. Panel Board For Measuring Speed With Power Supply And Tacho Generator Setup, Burette With Tank Assembly. Load Test – Test Rig Kit . Heavy-Duty Fabricated Ms Base Frame Anti-Vibration Mounting Arrangement Powder-Coated / Painted Finish 3 Saybolt Viscometer Apparatus Specifications:• Glass Type: High-Quality Borosilicate Glass Tube. • Control Type: Manual Energy Regulator Control. • Shape: Rectangular Bath With Cylindrical Test Chamber. • Temperature Range: Ambient To 240°C Oil Bath Temperature. • Humidity: Up To 80% Rh (Non-Condensing). • Power Supply: 230 V Ac, 50 Hz. • Measuring Range: 32 To 1000 Sus(Saybolt Universal Seconds). Accuracy: As Per Astm D-88(±0.2 Seconds). • Mounting Type:Benchtop. Capacity:One Cup(Approximately 60 Ml). Control Mode:Manual Operation. • Port Size:Standard Orifice Sizeas Per Astmd-88. • Features:Oil Bath With Heater, Thermoregulator, Insulated Outer Body, Orifice, Receiver Flask. 4 Cleveland Open Cup (Coc) Apparatus Specifications: Standard Compliance: Astm D92 / Is 1448 (Part 69) Test Method: Open Cup Flash And Fire Point Determination Test Cup: Brass, Precision Machined With Heat Resistant Handle Heater: Electric Heater (1000 W ±10% Nickel Chromium) With Variable Control Heating Rate: 5°C Per Minute (As Per Standard) Temperature Range: (-6 To 400)°C Thermometer: Astm 11C Or Equivalent Flame Applicator: Gas Test Flame With Fine Control Valve Body: Stainless Steel Housing Display: Analog / Digital Temperature Indicator Power Supply: 230V Ac, 50 Hz Safety: Overheat Protection Heat Insulation 5 Pensky-Martens Closed Cup Apparatus Specifications: Standard Compliance: Astm D93 / Is 1448 (Part 21) Type: Pensky-Martens Closed Cup (Motorized, Digital Type Preferred) Test Cup: Brass Cup Diameter: 50.7–50.8 Mm Capacity: Minimum 70 Ml Stirring System: Heater: Electric Heater 650 W ±10% Heating Rate: 1–12°C/Min Adjustable Ignition: Pilot Flame With Automatic Shutter Mechanism Temperature Measurement: Thermometer Or Digital Sensor(Ip-28C Or Astm) Digital Temperature Display Power Supply: 230V Ac, 50 Hz Safety: Over-Temperature Cut-Off Flame Safety Control Please Enable Macros To View Boq Information = Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Tamil Nadu View Result →
47.
Educational and Research Institute #11269503 Price Bid
Tender For Purchase Of Equipments For Ece Department-- 1 Function Generator • Frequency Range: 0.1 Hz To 5 Mhz• Display: 4 To 6 Digit Led Display• Output Waveforms: Sine, Triangle, Square, ± Pulse, ± Ramp.• Amplitude: 0–20 Vpp.• Rise Time: 2 Strain Gauge Trainer Kit•Ac Mains Power Supply: 230 V ±10%, 50 Hz• Metal Foil Strain Gauge Mounted Onbeam/Cantilever.• Strain Measurement Under Applied Load.• Wheatstone Bridge Arrangement.• Signal Conditioning And Amplification Circuit.• Instrumentation Amplifiers With 3½ Digit Display For Strain / Output Voltage.• Zero And Gain Adjustment Controls.• Provision For Applying Calibrated Loads.• Table-Top Trainer With Labelled Panel.• Test Points For Signal Measurement.• Built-In Dc Power Supplies And Wooden Closed Cabinet.• Supplied With Patch Cords And User Manual. 3 Temperature Measurement Kit• Sensors:Rtd (Pt-100), Thermocouple (Fe-K/J-Type), And/Or Thermistor (Ntc).• Display: 3½ Digit Led/Lcd Digital Display(Typically 200 Mv Fsd).• Temperature Source: Portable Water Kettle Orheater Block.• Signal Conditioning: On-Board Circuitry Foramplification, Linearization, And Cold Junctioncompensation.• Test Points: Multiple 2 Mm / 4 Mm Banana Sockets For Monitoring Input/Output Signals.• Power Supply: 230 V Ac, 50 Hz, Single-Phase.• Accessories: Glass Thermometer, 10 K Ntcthermistor Probe, K-Type Thermocouple Probe,Patch Cords And User Manual. 4 Cathode Ray Oscilloscopebandwidth: Dc To 30 Mhz (-3 Db)- Sensitivity: 1 Mv/Div To 5 V/Div- Display Modes: Ch1, Ch2, Dual(Chop/Alt), Add, Sub- Timebase: 0.2 Μs/Div To 0.5 S/Div(Essential For Slow Bio-Signals)- Magnification: X 10 Sweep Magnifier- Triggering: Alt Triggering, Auto, Norm, - Tv-V/H With Source Selection (Ch1, Ch2, Line, Ext).- Input Impedance: 1 Mohm || 25Pf- Included Accessories: Two 60 Mhzpassive Probes, Power Cord, Anduser Manual Please Enable Macros To View Boq Information = Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Tamil Nadu View Result →
Assam View Result →
49.
Public Administrative Department #11258632 AOC
Tender For Providing And Fixing Of Spares For Ht, Lt, Apfc, Starters, Other Panels And Repairing Of Various Equipment And Electrical Installation For Gangapur Dam Pumping Station, Booster Pumping And Various Tp Of Nmc.-1 P/F digital ammeter for measuring current 2 P/F digital voltmeter for measuring voltage 3 P/F multifunction meter 4 P/F selector switches for voltmeter & ammeter 5 P/F light emitting diode type indicator 6 P/F switch disconnector fuse (SDF) a 100A. b 200A. c 300A. d 400A. e 630A. f 800A. 7 P/F moulded case circuit breaker (MCCB) a Up to 100A. b 200A. c 250A. d 315/400A. e 600 / 630A. f 800A. 8 P/F MCB a 6A to 32A b 40A to 63A. c P/F One way distribution board suitable for MCB 9 P/F Busbar chamber with triple pole neutral aluminium bus bar a 100A. b 200A. c 300A. d 400A. e 630A. f 800A. 10 P/F DOL starter a Up to 7.5HP. b Up to 10HP. 11 P/F street light bracket complete 12 P/F FRP box on pole/wall complete a 150mm x 125mm x 100mm, 2.7 mm thick b 250mm x 200mm x100 mm, 2.7 mm thick c 300mm x 200mm x125 mm, 2.7 mm thick 13 P/F LED 22W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete 14 Providing and filling Transformer oil 15 Point wiring in PVC trunking (casing-capping) with (2+1E) copper wire, modular type switch, earthing and required accessories 16 Point wiring for independent plug in PVC trunking (casing capping) with (2+1E )FRLSH grade copper wire, modular type switch, earthing and required accessories 17 P/F mains with 2 X 2.5sq.mm 1.1KV grade copper PVC stranded/solid wire complete (2 core, 71+36(1 core earthing)=107/- ) 18 Supplying and erecting PVC trunking (PVC casingn- capping) of size 25mm with accessories on wall/ceiling 19 P/F half round 15cm dia RCC hume pipe with necessary back filling etc complete 20 Providing and spreading stone metal 25mm size for 100mm depth above the ground level. 21 P/F three phase heavy duty power capacitors in suitable banks with voltage rating 440V, 50Hz 22 Providing and laying Aluminium conductor 3.5 core XLPE/PVC armoured 1.1KV grade cable a 25sq.mm b 35sq.mm c 50sq.mm d 70sq.mm e 95sq.mm f 120sq.mm g 150sq.mm h 185sq.mm i 240sq.mm j 300sq.mm k 400sq.mm 23 Providing and laying Aluminium conductor 1 core XLPE/PVC armoured 1.1KV grade cable a 1 Core, 630sq.mm b 1 Core, 800sq.mm c 1 Core, 1000sq.mm 24 Providing and laying Aluminium conductor 4 core XLPE/PVC armoured 1.1KV grade cable a 4sq.mm b 6sq.mm c 10sq.mm d 16sq.mm 25 Providing and laying Aluminium conductor 2 core XLPE/PVC armoured 1.1KV grade cable a 4sq.mm b 6sq.mm c 10sq.mm 26 Providing and laying copper conductor 2.5sq.mm XLPE/PVC armoured 1.1KV grade cable a 2 Core, 2.5sq.mm b 3 Core, 2.5sq.mm 27 P/L flexible PVC sheathed submersible type copper cable. a 4 core 2.5 sq mm b 4 core 4 sq mm c 4 core 6 sq mm d 4 core 10 sq mm e 4 core 16 sq mm f 4 core 25 sq mm g 4 core 35 sq mm 28 Providing and laying Alu. conductor 3 core, XLPE /PVC 3.3KV armoured cable a 70sq.mm b 95sq.mm c 120sq.mm d 150sq.mm e 185sq.mm f 240sq.mm g 300sq.mm h 400sq.mm 29 P/F heat shrinkable outdoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 30 P/F Heat shrinkable indoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 31 P/F Heat shrinkable straight through joint kit for 3 core, 3.3Kv (E) XLPE HT cable etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 32 Providing and laying Aluminium conductor 3 core, XLPE/PVC 11KV armoured cable a 95sq.mm b 120sq.mm c 150sq.mm d 185sq.mm e 240sq.mm f 300sq.mm 33 P/F heat shrinkable outdoor termination kit for 11Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-95sq.mm b 120-185sq.mm c 240-300sq.mm d 400sq.mm 34 P/F Heat shrinkable indoor termination kit for 11Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-95sq.mm b 120-185sq.mm c 240-300sq.mm d 400sq.mm 35 P/F Heat shrinkable straight through joint kit for 3 core, 11Kv (E) XLPE HT cable etc complete a 70-95sq.mm b 120-185sq.mm c 240-400sq.mm 36 Providing and laying Alu. conductor 3 core, XLPE / PVC 33KV armoured cable a 95sq.mm b 120sq.mm c 150sq.mm d 185sq.mm e 240sq.mm f 300sq.mm 37 P/F heat shrinkable outdoor termination kit for 33Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 38 P/F Heat shrinkable indoor termination kit for 33Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 39 P/F Heat shrinkable straight through joint kit for 3 core, 33Kv (E) XLPE HT cable etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 40 P/F Heat shrinkable straight through joint kit for flexible PVC sheathed submersible type copper cable. a 4 core 2.5 sq mm b 4 core 4 sq mm c 4 core 6 sq mm d 4 core 10 sq mm e 4 core 16 sq mm f 4 core 25 sq mm g 4 core 35 sq mm 41 P/F HT capacitor suitable for 3.3KV in suitable banking 42 Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete 43 Powder coating in siemens gray colour 44 Making Iron work for fabrication with bending, cutting, drilling and welding complete 45 Epoxy painting on both side of approved colour shade of provided iron work 46 P/F GI strip of suitable size 47 P/F M.S. stand for fire bucket 48 P/F Wall hook for fire bucket 49 P/F G.I fire bucket 9Lit 50 P/F Instruction chart 51 Pair of rubber hand gloves 52 Supplying and erecting fire extenguisher 4.5Kg 53 P/F High voltage insulating Electromat confirming to IS 15652 :2006 a Suitable for 3.3KV. b Suitable for 11KV. c Suitable for 33KV. 54 Providing and laying double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete a 50 mm b 75 mm c 90 mm d 120 mm e 160 mm f 175 mm g 200 mm 55 P/F Flood light LED fitting for street light a 50W b 70W c 100W d 120W e 155W f 195W 56 P/F aluminium PVC unarmoured cable 2 X 6sq.mm of 1.1kv grade 57 P/F mini feeder pillar triple pole with 200A MCCB as incomer etc complete 58 P/F mini feeder pillar triple pole with 300A MCCB as incomer etc complete 59 P/F fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work complete 60 P/F double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire meshcomplete 61 P/F 50 x 50 x 6mm angle iron corner support 0.5m away from fence support fixed etc. 62 Providing and fixing ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps 63 P/F analog Ammeter for measuring current 64 P/F analog Voltmeter for measuring voltage 65 Providing and laying XLPE armroured cable for 3.3KV with ISI mark 1 core 630 sq.mm. stranded aluminium wire in an approved manner. 66 P/F heat shrinkable outdoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected the supply with insulated sleeves,additional lugs nut bolts for 1 x 630 sqmm cable with HT testing site etc complete 67 P/F programmable logic controller for Thyristor logic KPOPF – 406 – T. 68 P/F Injector module for Thyristor logic KPIPF 406 – T. 69 P/F Zero switching module for Thyristor logic KPZPF – 406 – T. 70 P/F current generator 440V, 50Hz, for final compensation of real time PFC after basic compensastion using programmable logic controller, relay module, ZCS control thyristor units with its software, hardware, power and control cabling etc complete. a Up to 42A b 42A to 56A c 70A to 105A. d 112A to 140A 71 P/F ROM-51 memory controller with accessories along with routine software program for Thyristor logic. 72 P/F ROM-51 memory controller with accessories along with routine software program for zero switching logic. 73 P/F voltage transformer with 11V, 18-0-18V, 22V, 8V secondary. 74 P/F output module for soft starter-KPOSS-306. 75 P/F proportional Integral card with operational amplifier KPISS-306. 76 P/F analog to Digital converter ATD-09. 77 P/F MCR-31 Main controller with accessories. 78 P/F 7-Segment common anode display controller DSP-79 with accessories. 79 P/F RAM-64 memory unit with accessories. 80 P/F ROM-SS-64 memory unit with accessories along with routine software program. 81 P/F ROM-SS-51 memory unit with accessories along with routine software program 82 P/F flat band cable set 26pin. 83 P/F flat band cable set 20pin. 84 P/F glass type relay O/E/N RL-24. 85 P/F 2A fuse box of EI for power supply (20Nos). 86 P/F 2A glass fuse base open type FBO. 87 P/F tertiary current transformer 88 P/F PLA relay 24D 1NO RDRL-24. 89 P/F SMPS ripple filter choke 5V DC, 1500mA. 90 P/F 24VDC, 10A Electromechanical relay PLA and snubber. 91 P/F voltage transformer with O/P 6.8V, 11.5V, 22.5V Delta to star. 92 P/F programmable logic controller module for contactor logic KPOPF – 406 – C. 93 P/F injector module for contactor logic KPIPF – 406 – C. 94 P/F relay module for contactor logic KPRLPF – 406 – C. 95 P/F ROM-51 memory controller with accessories along with routine software program for contactor logic. 96 P/F thyristor back to back connected suitable for following starters and Capacitor banks. a 75HP. b 120HP. c 215HP. d 300HP. e 10KVAR f 15KVAR g 20KVAR h 25KVAR i 30KVAR 97 P/F inductor suitable for following Capacitor banks. a 10KVAR b 15KVAR c 20KVAR d 25KVAR e 50KVAR 98 P/F electrical contactors. a 32A. b 40A. c 70A. d 110A. e 200A. f 300A. g 400A. h 650A 99 P/F main contact kit for power contactor. a 32A. b 40A. c 70A. d 110A. e 200A. f 300A. g 400A. h 650A 100 P/F HRC fuses. a 40A. b 50A. c 63A. d 100A. e 125A. f 160A. g 200A. h 250A. i 315A. j 400A. k 630A. l 800A. 101 P/F fuse bridges. a Up to 32A. b 63A. c 160A. d 250A. e 800A. 102 P/F change over switches. a 63A. b 125A. c 200A. d 250A. e 315A. f 400A. g 630A. h 800A. i 1000A. 103 P/F timers. a ET-100. b Star-Delta. 104 P/F FASD starter. a ML2 b ML3 c ML4 105 P/F energy efficient street light fitting using 36W CFL lamps complete. 106 P/F 11KV HT fusegear for fuse switch unit of CGLucy 107 Actuator control unit. a P/F forward / reverse contactor b P/F over load relay. c P/F contact kit 108 Providing and laying copper conductor 12 core 2.5sq.mm XLPE/PVC armoured 1.1KV grade cable 109 P/F electronic control unit suitable for up to 175HP, control Supply 240V AC, Power Suply 415V AC, with all test and trials complete. 110 P/F electronic control unit suitable for up to 300HP, control Supply 240V AC, Power Suply 415V AC, with all test and trials complete. 111 P/F limit Switch for gate 112 P/F 10 Turns Preset. 113 P/F panel accessories such as push button with indicators, NO/NC contact, emergency stop push button, copper lug for control cable, gasket, etc complete. 114 P/F C I pipe type earthing etc complete. 115 P/F 230V, 2 C/O panel mounted relay. 116 P/F single phasing preventer relay 117 P/F single phase, under voltage, over voltage protection relay. 118 P/F oil temperature sensing relay 119 P/F winding protection relay 120 P/F reverse rotation sensing relay 121 P/F Motor protection relay for LT motor 122 P/F Control transformer with protection circuit 123 P/F PVC type earthing chambers with accessories for earthing. 124 Power contactor coil LC-1F 330 125 P/F sequence controller 126 Providing, fixing termination box for submersible pump to ATS starter with bus bar, terminations etc complete 127 Providing and laying 95sq.mm copper conductor 1 core flexible PVC unarmoured 1.1KV grade cable 128 Energy meter panel a P/F Energy meter single phase 230V, 50Hz, 10A supply complete b P/F Energy meter 3 Phase, 4 wire, 50Hz, 100A supply complete c P/F L.T. Current transformer of suitable ratio d Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete e Powder coating in siemens gray colour f Control wiring using copper wire, ferrule, lugs, tie saddle, spiral etc complete. g Panel accessories such as hardware, gasket, insulator, panel knob, panel lock for each feeder complete . h Dismantling of old meter panel by disconnecting connections of all cables, etc complete i Installation of new meter panel by fixing meter box, making incoming and out going connection etc complete. 129 Starter Panel a P/F digital ammeter for measuring current b P/F digital voltmeter for measuring voltage c P/F selector switches for voltmeter & ammeter d P/F light emitting diode type indicator e P/F L.T. Current transformer of suitable ratio f Providing and fixing Main Incommer 63A moulded case circuit breaker g P/F 100A Busbar chamber with triple pole neutral aluminium bus bar h Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete i Making Iron work for fabrication with bending, cutting, drilling and welding complete j Powder coating in siemens gray colour k P/F DOL ML 1.5 starter l P/F FASD ML2 starter m P/F FASD ML3 starter n P/F FASD ML4 starter o P/F Over load relay. p Control wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete. q Local/remote wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete. r Panel accessories such as hardware, gasket, insulator, panel knob, panel lock, bus bar terminals, etc complete. s Dismantling of old starter panel by disconnecting connections of all cables, etc completet Installation of new starter panel by fixing starter panel, making incoming and out going connection etc complete. u Terminations main outgoing cables by using lugs glands etc complete. 130 LT Panel, Changeover Panel, Distrubution Panel, Feeder Panel a Power wiring up to 63A feeder using copper wire, lugs, tie saddle, spiral etc complete. b Control wiring for metering using copper wire, ferrule, lugs, tie saddle, spiral etc complete. c Panel accessories such as hardware, gasket, insulator, backlite, panel knob, panel lock, push button with indicators, heavy duty connectors earthing arrangement, etc complete for following feeders i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A d Dismantling, disconnecting connections of all cables, shifting old panel in godown etc complete of following capacity. i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A e Installation of panel at desired place including loading unloading and transportation of following capacity i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A f Making new terminations of main incoming/outgoing cables, etc complete for following feeders. i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A g Interlocking, forward/reverse, timing and control circuit/star delta circuit etc control wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete for one feeder. 131 P/F 3 phase street light timer controller of 60 A per phase rating with in-built relay, timer, protections, display 132 Providing, fixing and testing of HT TOD meter of appropriate class with required accessories along with co ordnation with MSEDCL complete. 133 Providing, fixing and testing of LT TOD meter of appropriate class with required accessories along with co ordnation with MSEDCL complete. 134 P/F Motor protection circuit breaker 135 P/F 3 Phase heavy duty industrial socket. 136 P/F 1 Phase heavy duty industrial socket. 137 P/F and erecting 6mm Polycarbonate multiwall ultravoilet protected sheet for roofing over fabricated steel structure as per detail design, including fixing the Polycarbonate sheet with alluminium angle & Flat anodized & dyed as per approved shade including all water proofing materials, nuts bolts hardware, labour & square pipe, angles, fabrication complete including all hardware etc. as required . (only actual area of polycarborted sheet to be considered for measurements) 138 Making isolation circuit using AB switch / D.O. Set for single pole & converting the cutpoint by dismantling with nessasary material, jumping, earthing along with arrangement of shutdown etc. complete. 139 P/F diesel filling pump for filling diesel in dg sets from store tanks etc complete. 140 P/F meter box for single phase energy meter complete. 141 P/F meter box for three phase energy meter with compartment for mccb/mcb etc complete. 142 P/F of spares for DG control panel a Flush mounted panel meter three phase four wire for frequency etc. b 12V/80AH Battery c 12V/100AH Battery d 12V/150AH Battery e 12 V/180AH Battery f 12V/200AH Battery g Battery water h EPU unit i AVR j AMF Controller k Voltmeter DC l Ammeter DC m Push button n ESR D1 o 12V battery charger p 24V battery charger q Overload relay r Relay s Electronic Timer t Hooter u Connector 143 Reconditioning of transformer a Inspection of distribution transformer on HV and LV side b Dismantling the distribution Transformer from the plinth / foundation c Providing and filling Transformer oil d Painting of transformer using smoke gray paint complete e Providing and rewinding of copper material for HT coils f Heating of core and winding, including removing of moisture etc complete g Providing oil arresting sheet for low tension side of R Y B studs, 5mm thick properly fitted in the studs of transformer. h Providing oil arresting sheet for top cover of oil chamber, LT connection box, oil tank etc parts ,5mm thick properly fitted in the top cover and nut bolts of transformer i Providing R Y B stud bushings over the oil arresting sheet on the studs of transformer . j Reinsulation by high quality uniform covering throughout of 11KV windings using accessories complete k Reinsulation by high quality uniform covering throughout of 415V windings using accessories complete l Repairing and servicing of tap changer of transformer m Transformer oil filtration n Changing silica jel of breather and adding breather oil. o Loading, unloading and transportation of transformer. p Attendance, engineering charges for connection of HT/LT cables and giving satisfactory test & trials of transformer complete 144 P/F Analog input module AI 2xI, 4-wire transmitter (+/-20 mA /13 bits+sign, 4 mA to 20 mA/13 bits), standard 145 P/F Analog input module AI 4xI, 2wire- MU(4..20mA), standard 146 P/F Digital output module DO 8xDC24V/0.5A, supports isochrone mode 147 P/F Power module PM-E for electronic modules, 24 VDC, with diagnostics 148 P/F Digital input module DI 8xDC24V, supports isochrone mode 149 P/F IM151-8PN/DP central processing unit work memory 192KB; 0.06ms/1000 instructions; PROFINET connection; S7 communication (loadable FBs/FCs); PROFINET IO-Controller; supports RT/IRT; PROFINET interface and 3 ports; MRP; PROFINET CBA; PROFINET CBA-Proxy; transport protocol TCP/IP, 150 P/F Communication module with a serial interface (RS232, RS422 or RS485) and Modbus master log with 8 byte I/O interface 151 P/F Communication module with a serial interface (RS232, RS422 or RS485) and Modbus slave log with 8 byte I/O interface 152 P/F Programmable logic controller 1769 TW Digital input module 32 point. 153 P/F Programmable logic controller 1769 Analog input module 8C 0-10V 0-20 154 P/F Programmable logic controller 1769 Digital output module 32 point. 155 P/F Programmable logic controller 1769 Power unit. 156 P/F Programmable logic controller 1769 Compact I/O to DSl module. 157 P/F Programmable logic controller 1769CMPAC Logix processor ethernet 2MB 158 P/F Programmable logic controller 1969 Endcap right. 159 P/F Laser printer Spares for VCB 160 P/F closing coil assembly- 4VC49-110 161 P/F tripping coil assembly- 4VC49-106 162 P/F micro switch 163 P/F breaker auxiliary switch 164 P/F spring charging motor 165 P/F closing shaft with spring. 166 P/F tripping shaft with spring. 167 P/F charging handle assembly 168 P/F pinion gear assembly 169 P/F spur gear assembly 170 P/F bridge rectifier 171 P/F spring for tripping catch 172 P/F tripping catch assembly 173 P/F closing catch assembly 174 P/F driving rod assembly 175 P/F nut assembly 176 P/F cam shaft assembly 177 P/F vacuum interrupter Spares for VC 178 P/F closing coil assembly for VC 179 P/F tripping coil assembly for VC 180 P/F 2 Pole auxiliary switch 181 P/F micro switch 182 P/F bridge rectifier 183 P/F vacuum interrupter 184 P/F contact shroud assembly 185 P/F PDS assembly- 4VC19-0027/01 186 P/F shutter assembly- 3VB79-310/04 187 P/F 5 pole auxiliary switch- J309-022 HT Panel Spares 188 P/F moulded contact shrouds- 1VB79-0009/04 189 P/F shutter assembly- 3VB79-0087/02 190 P/F push button- green button with spring. 191 P/F push button- red button with spring. 192 P/F PDS assembly- with fixing nut bolt- 4VC19- 0027/03 193 P/F insulated stud assembly 194 P/F flexible jumper with fixing bolt- 3VC19-0009 195 P/F coupling 196 P/F bus conductor- upper- 4VC13-0002 197 P/F bus conductor- lower 198 P/F top cover for U barrier- 4VC19-0117/01 199 P/F 16 Pin plug with socket- 4VC46-0303 200 P/F PT fuse 201 P/F voltage transformer (PT) of suitable Ratio secondary 110VAC and suitable class: 202 P/F current transformer (CT) of suitable ratio secodary 5A and suitable class. 203 P/F TNC switch 204 P/F local remote switch 205 P/F PVC shroud- CT/PT/CR surg 206 P/F PVC shroud- 630A 207 P/F contact shroud for PT. 208 P/F rubber gasket for door 209 P/F bushing plate- VCB 210 P/F control fuse with assembly, 440V 211 P/F loose vacuum contactor [Electrically held] type JVE1-604. 212 P/F loose vacuum Contactor for soft starter MVC400D, 400Amp, 3.3KV, 2P, Control supply 220VDC, Solenoid type, with 3 economy resistance- CVC0004, 213 P/F electronic timer suitable in HT starter. 214 P/F Over current, Earth fault relay and short circuit protection relay and retrofitting if required. 215 P/F Under voltage/ Over voltage protection relay and retrofitting if required. 216 P/F Master trip relay and retrofitting if required. 217 P/F Trip circuit supervision relay and retrofitting required. 218 P/F auxillary relay for contact multification RE-300 Aux supply: 110V AC / DC 219 P/F auxiliary contactor for vaccum contactor operation 110VDC with resistor complete. 220 P/F limit switch for service & test position 2 Pole. 221 P/F tripping relay VAJH 3NO + 1NC, 110VDC 222 P/F selector switch for HT panel 223 P/F breaker operated switch 10 pole, 5NO + 5NC. 224 P/F power pack unit Input: 110V AC, Output: 110VDC 225 P/F On line UPS pure sine wave with standard features a 1KVA b 2KVA c 3KVA d 6KVA e 10KVA 226 P/F SMF battery a 12 V/17Ah -18Ah b 12 V/26Ah c 12 V/42Ah d 12 V/65Ah e 12 V/100Ah 227 P/F fixed resistor 1000 ohms. 228 P/F safety switch for VC HRC fuse P/F blow pole 1C/O 229 P/F connecting rods for safety switch 230 P/F safety switch for VC trunk Interlock 2 Pole NO + 1NC.231 P/F high voltage 3.6KV HBC fuse links for short circuit protection. 232 P/F and giving satisfactory test and trials of 3.3 KV 104Kvar Capacitor panel as per rate analysis. 233 P/F and giving satisfactory test and trials of 3.3 KV 208Kvar Capacitor panel as per rate analysis. 234 P/F MM30 type protection relay Machining and fabrication works for couplling of actuator and valve 235 P/F Universal joint 236 P/F Mounting bracket 237 P/F Flange 238 P/F Coupler 239 P/F Shaft coupler 240 P/F Additional shaft 241 P/F Fastener bolt, hardware, etc accessories 242 P/F 0.6mm GI sheet 243 P/F regular/ standard model Ceiling fan complete 244 P/F ISI mark modular type (two module) electronic step regulator for fan 245 P/F condenser 2.5 micro farad for ceiling fan 246 P/F anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. 247 P/F fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. 248 P/F fan hook of 10 mm. M.S. round bar grouted in RCC slab 249 P/F ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire 250 P/F heavy duty exhaust Fan 251 Refilling of fire extinguisher of by dismantling from site to workshop for refilling which includes removing of existing powder and cleaning the cylinder, delivery pipe , nozzle internally and refilling new powder complete with reinstalling properly at site 252 Dismantalling old rusted perforated type cable tray.253 P/F hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 100 mm width with necessary coupler plates and hardware in approved manner etc complete. 254 P/F, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity suitable to operate on 250V, 50 cycles, A.C.supply having 1 no of air handling unit hiwall / floor mounting type complete. 255 P/F, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete 256 P/Laying PVC insulated PVC round sheathed 2.5 sq.mm 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV 257 P/F copper pipe suitable for refrigeration system having size 12.7 mm complete. 258 P/F bracket for split type AC 259 P/F copper pipe suitable for refrigeration system having size 15.9 mm complete. 260 P/F Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 12 mm 261 P/F Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 16 mm 262 P/F rigid PVC pipe 20 mm dia.with PVC accessories for drain 263 Carrying out core cutting of size 3 to 5 dia x 15 length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. 264 Providing, Installation, Testing and commissioning of borewell type maintenance free chemical earthing comprising of Electrode of 80 mm diameter rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. 265 Providing, Installation, Testing and commissioning of borewell type maintenance free chemical earthing comprising of Electrode of 80 mm diameter rod of Length 1.5m along with 15 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. 266 Providing and making platform by making excavation for foundation, situ cement concrete of M-10, uncoursed rubble masonry of trap, rubble stone soling 15cm to 20dc thick including hand packing and compacting, situ cement concrete of M20 grade trap, steel bar rainforcement of various diameters for RCC work, sand faced plaster externally in cement mortar, etc complete 267 Providing hand drill Machine 268 Providing hand grinder 269 Providing Crimping tool up to 400sq.mm 270 Providing Insulator tester ( Megger ) cranking type having metal body of range 100 Volts 1000 Ohms 271 Providing fix spanner set 12 piece set 6 -32 mm 272 Providing Bi-hexagon Ring spanner 12 piece set 6 - 32 mm 273 Providing screw driver a Screw driver Engineering pattern 6 X 300 mm b Screw driver Engineering pattern 8 X 200 mm c Screw driver Engineering pattern 5 X 200 mm d Screw driver Engineering pattern 5 X 300 mm e Screw driver with green neon bulb line tester 3.6 X 60 mm 274 Providing Multimeter 275 Providing Tong Tester ( Clip on meter ) of range 0- 10-30-100-1000 Amps and 0-300-600 Volts 276 Providing Ball pen hammer with handle 800 gm 277 Providing Hack saw frame 300 mm size with heavy duty blade 278 Providing blower 279 Providing single phase welding machine 280 P/F fixing isolator suitable for 33KV capacity 281 Providing office regular with handle chair 282 Providing fabricated powder coated rack 283 Providing computer table 284 Providing 18 compartment steel clothes locker with powder coating, locking arrangement, etc complete. 285 Providing regular office wooden table 286 Providing wooden chair 287 Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8mm thick & Top in 2mm thick CRCA, Shutter to be mounted with the help of cuphinges, and adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns 288 Providing and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish 289 Providing & Arrangemnt of High Back chair, Synchronized Mechanism with Multiple Locking, Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery 290 P/F disc type insulator suitable for 33 KV line complete erected with suitable Hardware on provided cross arms as per IS. 291 P/F pin type insulator suitable for 33 KV line, complete erected with suitable hardware on provided cross arms. 292 P/F G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/8 SWG, G.I. stay rod 20 mm x 1.8 meter length and pole clamps duly erected in provided cement concrete foundation. 293 Providing and fixing Nut bolts and Sundries etc accessories 294 Making isolation circuit for all 3 phases and interlocking the same to provide 33KV output from 2 Nos of 33KV input feeders using accessories etc complete. 295 Dismantling the existing old 33KV circuits and all jumps, accessories, etc complete. 296 Providing and fixing safe shade ESE type lighting arrestor system complete with following details. a P/F safe shade ESE type lighting arrestor as per NFC17-102 (2011) UNE 211862011 standards, CPRI tested, area covered 107 Mtr, etc complete. b P/F GI mast 5mtr long wth base plate complete c P/F 6 Digit counter, etc complete d P/F accessories for lightning arrestor, etc complete. e P/F test link box etc complete. f Providing, laying and terminating single core 35sq.mm copper flexible cable for earthing 297 Providing and making overhead cablling works for clarifier bridge slipring a P/F slipring b Providing and laying copper conductor 1.5sq.mm X 4 core XLPE/PVC 1.1KV grade cable c P/F hardware, bobbin, anchor fastners, cork sheet etc accessories for slipring fixing works. d P/F GI wire of high purity of different sizes used for earthing. e P/F attachment to slipring for entering cable from top using GI pipes, coupling, flange, bend, by machining and threading the components so that cable will remain fix when clarifier is rotating. f Making arrangement using provided GI wire, bobbins to carry the provided cable overhead from filter to clarifier. g Making terminations for slipring main panel, clarifier panel, etc.Part B- Annual maintenance contract 1 Servicing and overhauling of APFC panels. A Servicing of APFC panel by making terminations of power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, tightening all connections, changing hardware, insulator, gasket, replacing provided blown fuses, fuse base, indicators and other parts as required in engineering manner for each bank complete as follows. a Control feeder for 1 to 5KVAR bank. b Control feeder for 5 to 10KVAR bank. c Control feeder for 10 to 20KVAR bank. d Control feeder for 20 to 30KVAR bank. e Control feeder for 30 to 50KVAR bank. B Servicing of main programmable logic controller injector module, ZCS module, by correcting dry solder, calibrations of three phase voltage, currents, all parameters, power supplies, tightening all connections, adjusting preset values to maintain unity power factor, checking transformer voltages, current ratios, checking of panel & cleaning of panel complete. 2 Servicing and overhauling of soft starters. Servicing of contactor by changing provided contact kits, coil, terminations, control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches, servicing of analog card, digital card, display card, correcting dry solder, calibrations of three phase voltage, currents, all parameters, power supplies, adjusting preset values, checking transformer voltages, current ratios, termination of incoming outgoing cables as required. Also tightening of connections, cleaning of panel complete. a 70 to 90HP. b 90 to 120HP. c 120 to 150HP. d 150 to 215HP. e 215 to 300HP. f 300 to 1000HP 3 Servicing and overhauling of starters. Servicing of contactor by changing provided contact kits, coil, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, push buttons, voltmeter, ammeter, selector switches checking oil level and top up, auto transformer links, termination of incoming outgoing cables as required. Also tightening of connections, setting of timers and cleaning of panel complete. a 3 to 7.5HP. b 7.5 to 12.5HP. c 12.5 to 20HP. d 20 to 30HP. e 30 to 50HP. f 50 to 70HP. g 70 to 90HP. h 90 to 120HP. i 120 to 150HP. j 150 to 215HP. k 215 to 300HP. 4 Servicing and overhauling of distribution panels. Servicing ,repairing of distribution panels by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, provided indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections of feeders of following capacity. a Up to 32A b 32A to 63A c 63A to 100A d 100A to 150A e 150A to 200A f 200A to 250A g 250A to 400A h 400A to 630A i 630A to 800A j 800A to 1000A k 1000A to 1250A l 1250A to 1600A 5 OCB to MCCB conversion. Dismantling output starter’s cable terminated to OCB, dismantling incoming and outgoing bus bar of OCB to main LT panel, dismantling OCB from main LT panel properly. Making iron frame for fitting of MCCB. Fitting of MCCB in main LT panel with proper hardware, covering the front open portion with 16SWG MS sheet with adjusting slot for MCCB handle. Terminating the R Y B connection of MCCB with main LT panel’s bus bar using appropriate rating of copper flexible cable and proper copper lugs. Reconnect the output’s starter cable to MCCB, taping all power connections, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches. Replacing indicators and other parts as required. Cleaning of panel, tightening of all connections. 6 Servicing and overhauling of actuator electrical control module. Servicing of actuator electrical control module by servicing of contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 7 Callibrating all presets/sensor for gate/screen with open/close and electronic indication system. Checking control wiring for remote and local operation, adjusting limit switches with proper close and open, giving satisfactory test and trials of remote and local system etc complete. 8 Servicing and overhauling of alum mixer control module. Servicing of alum mixer module by servicing of SFU, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 9 Servicing and overhauling of chlorine plant control module. Servicing of chlorine plant module by servicing of SFU, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 10 Servicing and overhauling of clarifier control module. Servicing of clarifier module by servicing of breaker, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 11 Servicing and overhauling of HT substation. a Servicing and overhauling of 4 pole structure, servicing air break switch by polishing contacts, applying jelly to contacts, alignment of AB switch, servicing and overhauling of D.O. set by polishing hansa and punja, applying jelly to all hansa and punja, changing fuse link tightening of connections, changing hardware, changing ACSR jumper links by properly lugging and binding using alkathene pipe. HT taping of connections, checking of insulators, insulation test of total installation and earth test of earthing pits. b Cleaning of substation area, painting of 4 pole structure , fencing and gate using aluminium paint and scraping old paint. Painting of transformers using AD gray paint and scraping old paint. 12 Servicing and overhauling of 33KV H.T. Substation at Gangapur Dam pumping station. a Servicing of air break switch by polishing contacts, applying jelly to contacts, alignment of AB switch, tightening connections, changing hardware, etc complete. b Painting of gantry structure for air break switch by cleaning all poles channels using aluminium paint 3 coats. c Servicing of D.O. set by polishing hansa and punja, applying jelly to hansa and punja, tightening connection, changing hardware and fuse wire, etc complete. d Painting of gantry structure for D.O set by cleaning all poles channels using aluminium paint 3 coats. e Servicing of PT by checking, lugging, tightening HT and earthing connections, checking, tightening secondary connections, measuring voltages at out put for main bus, bus-1 and bus-2. f Painting of gantry structure for main bus PT by cleaning all poles channels using aluminium paint 3 coats. g Painting of gantry structure for PT bus-1 and bus-2 by cleaning all poles channels using aluminium paint 3 coats. h Painting of PT for main bus, bus-1, bus-2 and MSEDCL by cleaning them and using smoke gray paint 3 coats. i Servicing of VCB by checking operating mechanism, alignment, applying jelly to various parts, control wiring, remote local operation, spring charging, insulation tests for main bus, bus-1 and bus-2. j Repairing servicing of control feeder panel for VCB/VC by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete. k Servicing of CT by checking, lugging, tightening HT and earthing connections, checking, tightening secondary connections, measuring currents at out put for main bus, bus-1, bus-2. l Painting of gantry structure for VCB and CT for main bus, bus-1 and bus2 by cleaning all poles channels using aluminium paint 3 coats. m Painting of VCB for main bus, bus-1 and bus-2 by cleaning them and using smoke gray paint 3 coats. n Painting of CT for main bus, bus-1, bus-2 and MSEDCL by cleaning them and using smoke gray paint 3 coats. o Painting of gantry structure for MSEDCL CTPT structure by cleaning all poles channels using aluminium paint 3 coats. p Painting of gantry structure for cut point by cleaning all poles channels using aluminium paint 3 coats. 16 Repairing of analog input module AI 2xI, 4-wire transmitter (+/-20 mA /13 bits+sign, 4 mA to mA/13 bits), standard 17 Repairing of analog input module AI 4xI, 2wire- MU(4..20mA), standard 18 Repairing of digital output module DO 8xDC24V/0.5A, supports isochrone mode 19 Repairing of power module PM-E for electronic modules, 24 VDC, with diagnostics 20 Repairing of digital input module DI 8xDC24V, supports isochrone mode 21 Repairing of IM151-8PN/DP central processing unit work memory 192KB; 0.06ms/1000 instructions; PROFINET connection; S7 communication (loadable FBs/FCs); PROFINET IO-Controller; supports RT/IRT; PROFINET interface and 3 ports; MRP; PROFINET CBA; PROFINET CBA-Proxy; transport protocol TCP/IP, 22 Repairing of Communication module with a serial interface (RS232, RS422 or RS485) and Modbus master log with 8 byte I/O interface 23 Repairing of Communication module with a serial interface (RS232, RS422 or RS485) and Modbus slave log with 8 byte I/O interface 24 Repairing of Programmable logic controller 1769 TW Digital input module 32 point. 25 Repairing of Programmable logic controller 1769 Analog input module 8C 0-10V 0-20 26 Repairing of Programmable logic controller 1769 Digital output module 32 point. 27 Repairing of Programmable logic controller 1769 Power unit. 28 Repairing of Programmable logic controller 1769 Compact I/O to DSl module. 29 Repairing of Programmable logic controller 1769CMPAC Logix processor ethernet 2MB 30 Repairing of Programmable logic controller 1969 Endcap right. 31 Inhouse Programmable logic controller software devlopment charges. 32 On site commissioning of hardware, testing the complete system, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of control cables as required. Cleaning of panel, tightening of all connections, etc complete. 33 Servicing and overhauling of programmable logic controller panels complete system. Servicing ,repairing of programmable logic controller panels by checking software routine, debugging software, analysing the ladder diagrams, checking hardware and relay module, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of control cables as required. Cleaning of panel, tightening of all connections, etc complete. 34 Repairing, servicing of electromagnetic flow meter a P/F main kit PCB b P/F single card c Panel weather proof including internal wiring and components d Service charges e Setting and callibration of flow meter 35 Reparing of On line UPS pure sine wave by dismanteling, trasportation and reinstalling after repairing complete. a 1KVA b 2KVA c 3KVA d 6KVA e 10KVA 36 Servicing of DG control panel by servicing of EPU unit, battery charger, setting of timer, making control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware procured from material list like voltmeter, ammeter, selector switches, connector, MCB, indicators, push buttons. Also tightening of connections and cleaning of panel complete. 37 Servicing and overhauling of battery charger panel Servicing and overhaulling of battery charger panel by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, provided indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections, cleaning of battery terminals, checking battery voltages, battery cable lugs, etc complete 38 Servicing of RO/UV/UF water purifier by changing/cleaning of carbon filter, pre filter, sedement filter candles, cleaning of water purifier etc complete. 39 Repairing in point wiring wiring for light fan instrument with ISI mark 2-1sq.mm, copper wire PVC insulated 1.1KV grade with necessary accessories as required complete. 40 Repairing in power point wiring with ISI mark 2-1.5 sq.mm, copper wire PVC insulated 1.1KV grade with necessary accessories as required complete. 41 Repairing of board with necessary accessories as required complete. 42 Installation of transformer with loading, unloading, transportation 43 Carrying out necessary tests before and after charging transformer upto full load to satisfaction by connecting earthing, incomming and outgoing cables etc complete. 44 Providing minor repairs to existing plumbing system. 45 Providing major repairs to existing plumbing system. 46 Tracing out fault in cable/cable kit/cubical, removing the connection of cable, taking insulation test. After fixing new cable/cable kit, making termination of the cable again taking insulation test and giving satisfactory test and trials, etc complete. 47 Dismantalling temporary hangging wires accessories, etc complete. 48 Chiselling of wall for laying cable / mains, clamping it properly and refilling the broken wall by using POP etc complete. 49 Repairing, servicing of synchronization panel by servicing of contactor by changing provided contact kits, coil, servicing of electronic controller, control relays terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, push buttons, voltmeter, ammeter, selector switches, termination of incoming outgoing cables as required. Also tightening of connections and cleaning of panel complete. 50 Annual Maintenance Contract for Power Genset includes routine check-up visits with following scope of work and all breakdown visits including spares and major repairs throughout the year. A 82.5KVA Gangapur Dam Pumping Station B 140KVA Shivaji Nagar WTP. C 250KVA Dwarka Pumping Station D 250KVA Gopalnagar Pumping Station E 400KVA Chehedi Pumping Station F 400KVA Nasikroad WTP. G 400KVA Gandhinagar WTP. H 400KVA Nilgiribag WTP. I 600KVA Panchavati WTP Scope of worka B check kit (oil filter set, fuel filter set) shall be changed as required. b Engine oil 15W40 suitable for genset shall be changed as required. c Air cleaner element shall be changed as required. d Coolant shall be filled and top up as required. e Checking temperature, removing leakages, checking battery voltage, battery charging voltage, output voltage, frequency, AVR, tappet setting for good performance of genset. f Routine checkup visits should be done monthly. g Apart from above scope of work all major works to be carried out including all spares of generator excluding panel, batteries as and when required through out the year except total engine failure, natural disaster like flood etc. 51 Transformer oil filtration 52 Making trench in soft soil for laying provided cable 53 Breaking bituminous/ concreate road by JCB/Tractor breaker complete. 54 Providing and casting in situ cement concrete M-15 / 1:2:4 of trap / granite / quartzite / gneiss metal, moulded or chamfered as per drawing or as directed for coping to plinth or parapet, including centering, form work, compacting, covering newly laid concrete by gunny bag, plastic or tarpaulin, roughening them if special finish is to be provided and curing and finishing if required etc. complete. (The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Wooden planks / shuttering will not be allowed) 55 Providing and laying jointless a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee- LM @ 700 gms/Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/Square Metre and finishing complete. 56 Repairing, servicing of crane panel by servicing forward/reverse contactor. Checking control wiring, adjusting limit switches, giving satisfactory test and trials of control systems etc complete. 57 Dismantling, disconnecting connections of all cables of ATS starters as fer following details. a Up to 80 HP. b 80HP to 200HP c 200HP to 300HP. 58 Erection of ATS starter panel at desired place including loading unloading and transportation and grouting it properly, etc complete as fer following details a Up to 200 HP. b 200HP to 300HP. 59 Annual Electrical inspection, compliance, test reports of earthing, insulation test etc complete for substation. 60 Annual Maintenance Contract for surge arrestor includes routine checkup visits with following scope of work and all breakdown visits including all spares and major repairs throughout the year etc complete. a Checking of surge arrestor pnumatic system by checking valve, pressure gauge, level gauge, solenoid valve, servicing of surge arrestor tank component, giving test and trials of automatic functioning of magnetic level sensors, checking all pressure etc complete. b Checking of compressor piston ring, gasket, shaft, filter, oil seal, oil ring, discharge valve, inlet valve, oil filling/top up and giving satisfactory test & trials of compressor. i Compressor No-1 ii Compressor No-2 c Checking of control panel for surge arrestor unit by checking terminations, power and control wiring, lugs, tie, saddle, ferrules, bus bars, hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches. Cleaning of panel, tightening of all connections etc complete. 61 Repairing servicing of VCB/VC by checking operating mechanism, alignment of contacts, applying jelly to various parts, tightening all connections, polishing contacts, checking auxiliary contacts, closing coils, terminal strips, VCB/VC operation, insulation tests and giving satisfactory test and trial complete. 62 Repairing servicing of control feeder panel for VCB/VC by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete. 63 Repairing servicing and attending breakdown of CG Lucy unit by checking operating mechanism, alignment of contacts, applying jelly to various parts, tightening all connections, polishing contacts, checking fuses, top up oil level, oil BDV test, CG Lucy operation, insulation tests and giving satisfactory test and trial complete. 64 Servicing of OLTC by checking operating mechanism, alignment, applying jelly to various parts, checking of control panel operations and replacement of provided indicators, switches, control fuses, hardware, insulator, gasket, polishing contacts, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete.
Contract Date: Jun 10, 2026 Contract Value : ₹ 94.40 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
Maharashtra View Result →
TenderDetail
Loading tenders