View Bid Results For Electronic Timer Tenders

We found 1803 Bid Results related to electronic timer tenders. You can find Contractor details who won electronic timer tenders along with contract details in Bid awards announcements section.

Filters
Stage
1408
236
159
Tender Publishing Platform
412
1391
State / UT
37
324
188
180
155
131
84
82
78
71
61
54
52
43
41
36
30
30
25
21
21
16
15
12
11
11
5
5
4
3
2
2
2
2
2
2
1
1
Contract Value
603
564
453
170
Publish Date
3
0
0
0
0
Sector
29
343
307
260
126
119
82
78
74
72
61
38
36
30
21
20
17
16
16
13
12
12
12
11
7
6
5
4
3
1
Ownership
7
828
382
361
171
48
7
5
Within keyword
Active filters:
Showing 1–37 of 1803 tenders matching your filters
1.
Water Resources and Irrigation #11498691 AOC
Tender for Requirement Of Electrical Equipments For Running Of Electric Pumping Sets In W.S Mechanical Division, Jhajjar. , Gi Wire (Heavy Duty) 4Mm , Pvc Copper Wire 6 Sqmm 3 Core (Havells, Polycab) , Kit Kat 100 annual periodical maintenance (Selvo, Bentex, Havells) , Bulb Holder (Ssk, Anchor, Phillips) , Clamp Meter (Sigma) , Pvc Tape Roll (Anchor, Precision) , Sisal Rope 3/4 , Kit Kat 63 annual periodical maintenance (Selvo, Bentex, Havells) , Pvc Flexible Wire 40/76 (Havells, Polycab) , Al Thimble 300 Sq.Mm , Al Thimble 90 Sq.Mm , Al Thimble 50 Sq.Mm , Al Thimble 630 Sq.Mm , Al Thimble 185 Sq.Mm , Al Thimble 35 Sq.Mm , Al. Thimble 70 Sqmm , Al. Thimble 95 Sqmm , Al Thimble 120Sqmm , Al Thimble 240Sqmm , Thimble 195 Sqmm , No Volt Coil (20-40 Hp) , Led 9W (Phillips, Havells) , Empire Tape , Electronic Star Delta Timer 400V (L&T, Schneider) , Bulb 200Watt , Plastic Air Fan 15 Hp , Moving Tip For 25-40 Hp , 32 Amp. Tp 3 Phase For 15 Hp Panel , 75 Amp. Tp 3 Phase For 15 Hp Panel , Relay As Per Sample For 15 Hp Panel , Timer As Per Sample For 15 Hp Panel , Ct For Single Phase Preventar For 15 Hp Panel (Concord) , 6Amp Mcb As Per Sample , St Spare Contactor 40 Amp. , Connection Plate For 100/ 150 Hp Motor As Per Sample , Connection Plate For 15 Hp Panelas Per Sample , Connection Plate For 15 Hp Motor Per Sample , Steam Carrier Assly. (20-40 Hp) , Flood Light 100W (Havells, Crompton, Surya, Philips, Wipro) , Rubber Sheet , Line Tester (Taparia)
Contract Date: Jul 06, 2026 Contract Value : 4.63 Lakh
Government Departments No of Bidders 3
2.
Power #11494630 Technical Bid
Tender For Biennial Maintenance Contract (Bmc), Form 01.08.26 To 31.07.28, Under Testing Department At Sgtpp-1. Cleaning Of All Control And Protection Related Panels And Equipments. 2. Assistance In Troubleshooting, Rectification, Minor Repairing Of All Type Of Electromagnetic Relays, Static &Numerical Relays. 3. Assistance In Troubleshooting, Rectification, Replacement Or Repairing As Required For Control Circuit, Electrical Measuring Instruments (Meter); Switches; Electrical Transducer, Oti,Wti Transmitter, Annunciator; Control Fuse; Contactor And All Other Associated Equipments/Items Inside The Panels In All Related Area. 4. Assistance In Testing Of Different Relays-Voltage, Current, Frequency, Power, Impedance Etc. 5. Assistance In Testing Of Thermal Over Load Relay, Mcb, Contactors, Timer, Fuse Etc. 6. Assistance In Identification Of Dc Earth Fault At Sgtpp Plant And Rectification Of 220Vdc Earth At The Area Of Testing Department. 7. Assistance In Testing And Calibration Of Meters And Transducer- Voltage, Current, Frequency, Power Factor, Watt,Var, Va Etc. 8. Assistance In Trouble Shooting, Maintenance And Testing Of All Type Of Electronic Modules In All Related Area Under Testing Dept. 9. Assistance In Testing Of All Electrical Installations At Site Or Shop Or Laboratory Such As Generator, Transformer, Circuit Breaker, Ct, Pt, Lightning Arrestor, Motor, Cvt, Reactor, Ngr, Isolator, Control Cable Andpower Cable Etc.Arrangement For Testing Also Be Done By Contractor For Any Location In Sgtpp Area. 10. Assistance In Testing Of Transformer Oil (Bdv, Moisture Content, Tan Delta) Etc. 11. Assistance In Reading Of Static Energy Meter Through Mri Only And Optical Communication Cord By Laptop Also Testing & Calibration Of Different Type Of Energy Meters. 12. Assistance In Testing Of Battery Bank Cells. 13. Assistance To Testing Department Related With Protective Relays, Electrical Instruments, And Different Power Control Panel/Board, System Testing Of All Electrical. Items/Equipment Of 2X300Mw & 2X500 Mw And 1X660Mw Units Of Sgtpp (Plant & Township Areas As Per Direction Of The Controlling Dept.) Like Existing Contract. 14. Shifting Of All Kind Of Testing Instruments And Other Necessary Tools And Tackles From Lab To Site And From Site To Lab Should Be Under The Scope Of Work Of Amc Manpower.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
3.
Water Resources and Irrigation #11491318 AOC
Repairs To Electro- Mechanical Items And Civil Works In Gandhinagar L.I.Scheme On Tungapadu Vagu Near Gandhinagar (V), Damaracherla(M), Nalgonda District (5Th Call).-Excavation for Structures- Mechanical Means ( Data adopted from MORTH) Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material Depth upto 3 m Excavation in ordnary rock (including HDR) without blasting including boulders above 0.3 m upto 0.60 m dia. for foundations of canal cross drainage and other appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed etc.,complete with initial lead upto 50m and initial lift upto 3m. Providing & constructing Sand filling below foudation including cost of all materials,machinery, labour, watering, ramming etc., complete with initial lead upto 50 m and all lifts. Providing and laying insitu vibrated M-10 ( 28 days cube compressive strength not less than 10 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for piers and abutments including cost of all materials, labour, machinery, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.Note: If water is to be brought from other place add only lead charges @ 500 ltr / cum. (Cement content: 220 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum) Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 280 kg / cum with use of super plasticiser(0.4% by wt. of cement),CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum) Manufacture, supply and Delivery of R.C.C. Socket and Spigot pipes conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length ) including conveyance and Laying and Jointing etc. (500 mm Dia) Manufacture, supply and Delivery of R.C.C. Socket and Spigot pipes conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length ) including conveyance and Laying and Jointing etc. (400 mm Dia) Supply and fixing of Mild Steel works including all materials and labour charges like cutting, welding , bending etc for finished item of wok Supply and fixing of Structural Steel including all materials and labour charges like cutting, welding , bending etc for finished item of wok Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust. After cleaning,applying primary coat with one coat of Zinc rich epoxy primer to a thickness of 40 microns ,followed by finishing coats 2 coats with Solventless Coal tar epoxy with material, labour and all accessories with all leads and lifts CRS Masonry in CM (1:3) 1st Sort Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS:2721-1979: 2 x 2 (50 mm x 50 mm) - 8 Gauge Supply and erection of 0-500V Digital Volt meter on exisiting panel boardincluding connections etc., complete.MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS. Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital Ammeter of size 96x96mm on existing panel board including connections etc., complete.MAKES : CONZERVE / ELMEASURE / L&T / SEIMEN Supply and fixing of Three phase Electronic energy meter, 240 V AC, 50 Hz as per IS 13010 upto 40 A range with 200% overload capacity complete with connections etc., complete on the existing board.MAKES : CONZERVE / ELMEASURE/ MECO/HPL/ HAVELLS Supply and erection of LED indication lamps on the existing panel board,including connections etc., complete.Makes : L&T / C&S / SALZAR / HPL MAKE. Supply and erecting porcelain Pin type insulator suitable for 11KV line with suitable hardware on existing cross arms. Filteration of transformer oil as per ISS specifications filters to di electric strength above 40 KV at site. Transformer oil tested as per IS-335 - 1972 (per Ltr) Supply of heavy duty long barrel aluminium lugs confirming to I.S specifications suitable for 400 Sq.mm cable etc complete with nuts,bolts and washers.Makes: DMI / Jainson / Dowels or equivalent make as approved by the department Supply of heavy duty long barrel Aluminium lugs confirming to I.S specifications suitable for 240 Sq.mm cable etc complete with nuts, bolts and washers.Makes: DMI / Jainson / Dowels Supply and erecting approved make 11KV, 5KA metal oxide lightning arrestors suitable for 11 KV supply with necessary materials on existing cross arm. Supply of 400A HRC Fuse Links. Makes : L & T / C & S / Standard / HPL / Havells / Siemens / Indo Asian. Supply and fixing of 250A HRC Fuse Links. Makes : L & T / C & S / Standard / HPL /Havells / Siemens / Indo Asian Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. With SS enclouser comprising of contactor with bi-metallic relay with necessary push buttons, etc.complete suitable for 5 HP Motor Makes: Siemens / Crompton / L&T / BCH. Supply of 32A HRC Fuse Links. Makes : L & T / C & S / Standard / HPL / Havells / Siemens / Indo Asian. Carryout routine maintenance, servicing and testing of 630A to 1000A L.T. ACB by cleaning fixed contacts ,moving contacts and arc chutes including servicing and putting the ACB in perfect working condition after getting all relay and ON ,OFF mechanism etc done with only manufacturing companies Supply and erection of approved make 11 kV Outdoor type gang operated Air break switch of 400 A capacity with 3 post pin type insulator per phase, mounted in Horizontal/Vertical position with necessary channels on cross arms with necessary channels on cross arms with adequate length of C class GI pipe for operating handle provided with Lock & Key at suitable height from ground level with necessary clamps. Routine maintenance of transformer in operation covering insulation resistance oil, break down strength. Reconditioning / replacement of silicazel, cleaning of transformer and topping upto oil level if required (extra cost will be paid for oil). Carryout routine maintenance and servicing of LT.Cubical panel board having approximately 15 to 22 Nos of switches cleaning with power brower and servicing the contacts, tightening the connection of incoming and outgoing cables, and clicking the operating.machanism for smooth functioning of switches and putting them in smooth working condition. Supply and fixing of 15.0 KVAR rating capacitor duty Contactor Supply and fixing of 25.0 KVAR rating capacitor duty Contactor Supply and Run of 50 mm x 6mm G.I. strip including cost of all accessories and labour charges etc., complete Supply and erection of Panel mounting cubical type 32A TPN 415V, 50 Hz. switch disconnector fuse unit complete with front drive mechanism with door inter lock,padlocking arrangement etc., complete with fuse links on existing control panel.Makes : L&T / SCHNEIDER / C&S / ABB / SIEMENS Supply,fixing and transportation of 43 / 45 W +/-10% (>=4500 Lumens) LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor must furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / SYSKA / Capart / Fortune Arrt / FIEM / Panasonic / Arraystorm / GM / Goldmedal LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs. Supply of 240 Sqmm 3.5 Core XLPE insulated, 1100V grade armored aluminum cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Paragon / RR kable / Beljin / Ollivin Supply of 400 Sqmm 3.5 Core XLPE insulated, 1100V grade armored aluminum cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Paragon / RR kable / Beljin / Ollivin Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing panel including connections etc., complete. MAKE : KAPPA Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) Supply of 11 KV/22 KV Hand gloves S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 40 mm NB Size. S & F Bronze Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size. S & F GI Union 40 mm nominal size 1st Quality S & F GI Union 25 mm nominal size 1st Quality Supply of Grease Supply of Packing Rope to the work site. Supply of Grease gun of 1 kg capacity. Complete dismantling of DV 40x40 vacuum pump, over hauling with replacement of pump bearings-2 Nos. Pump shaft gun metal bushes , pump glands, reconditiong of port plates, impeller lock nuts , studs, wheel bearing grease assembling of pump erection on base plate, correct alignment of pump and motor, successful trial run at site including cost of materials , labour charges, transportation charges of pump from scheme to workshop and vice versa and all other incidental charges etc. complete Supply and fixing of PH316 UNIQUE make coupler made of rubber Supply and fixing of Packing Studs to the work site including labour charges, etc., as directed by Engineer- in- Charge. Supply and fixing of Star and Delta Contactor in panel board, L&T MNX 265 Complete dismantling of (300mm-500mm dia) NRV. overhauling, replacement of wornout parts like spindle nut facing of shutter providing new bolts and nuts, rubber packing , assembling of valve including cost of materials , labour charges, transportation charges from scheme to workshop and vice versa and all other incidental charges etc. complete Complete dismantling of (300mm-500mm dia) Sluice Valves. overhauling, replacement of wornout parts like spindle nut facing of shutter providing new bolts and nuts, rubber packing , assembling of valve including cost of materials , labour charges, transportation charges of pump from scheme to workshop and vice versa and all other incedental charges etc. complete Complete repairs to 100mm dia Aircushion Valve and fixing including all other incidental charges etc. complete Complete repairs to 600mm dia Zero velocity valves and all other incidental charges etc. complete Complete repairs to 200mm dia Air Valves and all other incidental charges etc. complete Repair of 600mm Dia Expansion joint in Pressure main Complete Dismantling,Overhauling of WPIL make HCF pump run by 210 HP by replacing with new sleeves, bearings,impeller rings, chucknuts etc and aligning the pump true to the alignment of motor and successful trial run at site including transportation charges from site to work shop and vice versa Rewinding of Electric motor of 210 HP, 3Phase up to 1485 RPM squirrel cage induction motor with copper wire, for required IR values including minor repairs, hot air blowing lubrication of ball bearings, bush bearings and erection on base plate, correct allignment of pump and motor, testing of motor for original speed etc. trail run at site,including cost of materials, labour charges transportation charges of motor from scheme to workshop, workshop to scheme and all other incidental charges etc. aas directed by Engineer in charge. Supply and fixing of new Terminal Plate for 210 HP Motor ABB make Supply and fixing of 6316 C3 - 6319 C3 bearings set to the motor Supply and fixing of Thermal Overload Relay- CT ratio set (Make: L&T) MN12 9-15 Amps Supply of Timer ET 100 (L&T) Complete Servicing of 11 KV, 630 A, 25kA Outdor type Load Break switch replacing of damaged outgoing/incoming insulators, servicing the spring charge mechanism, Tighten the bus bar connections, Replacement of Indicator lamps and putting the Load Break Switch in perfect working condition after getting all relay and ON,OFF mechanism etc done with only manufaturing companies Painting to Transformer Yard pole structure after duly cleaning existing metal surfaces Supply and fixing Panel board lock Internal wiring inside Pump House 6 mm rubber flange for packing
Contract Date: Ref. Documents Contract Value : 23.60 Lakh
Government Departments No of Bidders 1
4.
Educational and Research Institute #11483466 AOC
Arc For Electrical Protective Devices , Electrical Protective Devices( L & T / Legrand / Indoasian) , Mcb Single Pole , A) 1 A , B) 2A , C) 3A , D) 6A , E) 10 A , F) 16 A , G) 20A , H) 25 A , I) 32A , J) 40A , K) 63A , Mcbdouble Pole , A) 1 A , B) 2A , C) 3A , D) 6A , E) 10 A , F) 16 A , G) 20A , H) 25 A , I) 32A , J) 40A , K) 63A , Mcb Tpn – , A) 10 Amp , B) 16 Amp , C) 20 Amp , D) 25 Amp , E) 32 Amp , F) 40 Amp , G) 63 Amp , Mcb Triple Pole Three Phase , A) 10 Amp , B) 16 Amp , C) 20 Amp , D) 25 Amp , E) 32 Amp , F) 40 Amp , G) 63 Amp , Mcb Single Pole Iron Box(Mds/L&T/Indo Asian/Havel’S/Siemens/Legrand) , Mcb D.P. Iron Box (Mds/L&T/Indo Asian/Havel’S/ Siemens/Legrand)) , Mcb Tp Iron Box , Mcb Four Pole Iron Box , Mcb 6 Way Box (Mds/L&T/Indo Asian) , Mcb 8 Way Box (Mds/L&T/Indo Asian) , Mcb 12 Way Box (Mds/L&T/Indo Asian/ Siemns) , Mcb Tpn Db 12 Way Box (Mds/L&T/Indo Asian) , Icdp Main Switch 16 Amp. Fuse Type , Icdp Main Switch 32 Amp. Fuse Type , Ictp Main Switch 32 Amp. Fuse Type , Ictp Main Switch 63 Amp. Fuse Type , Ictp Main Switch 100 Amp. Fuse Type , Ictp Main Switch 200 Amp. Fuse Type , Kit-Kat 15 Amp. 250 Volt , Kit-Kat 30 Amp. 440 Volt , Kit-Kat 63 Amp. 440 Volt , Kit-Kat 100 Amp. 440 Volt , Kit-Kat 200 Amp. 440 Volt , Motor Protection Circuit Breaker . As Per Is/Iec :60947-4-1 (L&T/Indo Asian/Siemens/Legrand) , A) 0.4 To 0.63 Amp , B) 0.63 To 1.6 Amp , C) 1.6 To 2.5 Amp , D) 2.5 To 4 Amp , E) 4 To 6 Amp , F) 5.5 To 8 Amp , G) 7 To 10 Amp , H) 10 To 13 Amp , I) 13 To 18 Amp , 1) Star Delta Starter 10 H.P. (L&T/ Siemens) , 2) Dol Starter(0.5 Hp To 5Hp) , 3) 4 Pole Contactors 16 Amp , 4) 4 Pole Contactor25 Amp , 5) 4 Pole Contactor 40 Amp , 6) 4 Pole Contactor 95 Amp , 7) 4 Pole Contactor 125 Amp , 8) Contactors For 10 Hp Motors (Mk) , 9) On Delay Timer (Eletx) , 10) Off Delay Timer (Eletx) , 11) Timer (3-10 Sec) , A) C - Channel For Mountingmcb & Contactor Within Panel , B) D – Rail Channel For Mounting Mcb, Mpcb & Contactors, Relay Within Panel. , Hrc Fuse , A) 4A , B) 6 A , C) 10 A , D) 16 A , E) 20 A , F) 25 A , G) 32 A , H) 40 A , I) 63 A , J) 100 A , K) 200 A , M) 400 A , Fuse Wires , A) 5 A; , B) 10 A; , C) 16 A; , D) 25 A; , E) 32 A; , F) 63 A; , Over Load Relay As Per Is/ Iec : 60947-4-1( L& T, Siemens, Legrand, Indoasian) , A) 0.4 To 0.63 Amp , B) 0.63 To 1.6 Amp , C) 1.6 To 2.5 Amp , D) 2.5 To 4 Amp , E) 4 To 6 Amp , F) 5.5 To 8 Amp , G) 7 To 10 Amp , H) 10 To 13 Amp , I) 13 To 18 Amp , Mccb Four Pole( L& T, Siemens, Legrand, Indoasian) , A) 32 Amp , B) 40 Amp , C)63 Amp , D) 100Amp , E) 125Amp , F) 200 Amp , G) 250 Amp , H) 400 Amp , Elcb ( L& T, Siemens, Legrand, Indoasian) , A) Dp 16 Amp , B) Dp 25 Amp , C) Dp 40 Amp , D) Fp 16 Amp , E) Fp 25 Amp , F) Fp 40 Amp , G) Fp 63 Amp , H) Fp 125 Amp , Rccb Conforms To Is : 12640 & Iec 61008-1,Degree Of Protection : Ip 20,Sensitivity Rating : 30Ma / 100Ma / 300Ma Short Circuit With Stand Capacity Of 10Ka With Scpdon-Off Indication,Test Button T Is Provided For Periodic Check Up , A) Dp 25 Amp , B) Dp 40 Amp , C) Dp 63 Amp , D) Fp 25 Amp , E) Fp 40 Amp , F) Fp 63 Amp , Switch Fuse Unitthree Phase, Hrc Type (L & T, Indoasian, Siemns) , A) 125 Amp , B) 200 Amp , C) 400 Amp , Level Cotroller (L & T, Siemens, Gic, ) , A) For Single Tanks Control , B) For Two Tanks Control , Level Sensing Probes (Ss) , Level Monitoring Switches , Floating Switch With Two Contacts (No+ Nc) , Magnetic Level Sensing Probe , Electronic Timer Chrono (Radix, Gic, Siemens, Schnider) , Electronic Timer Astrological (Radix, Gic, Siemens, Schnider) , Vertical Tpndb With Provision For Mccb Upto 125 Aas Incomer (Indoasian /Havells/Siemens) , A) 4 Way , B) 6 Way , C) 8 Way , Earthing Plate , 1) Copper 300X300x3 , 2) Copper 600X600x3 , 3) G.I. Plate 600X600 , 4)G.I. Bare Conductor , 5)Copper Bare Conductor (10Swg) , 6)G.I. Strip , 7)Copper Strip
Contract Date: Jul 01, 2026 Contract Value : 3.96 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
5.
Drinking Water Supply and Sanitation #11475886 Technical Bid
Tender for E-Quotation For Seeking Firm Rates For Non-Schedule Items For Preparing Estimates. , Supply, Installation, Testing and Commissioning Of New 80 Hp Vt Pump Set , Supplying,Installation,Testing And Commissioning Of Vt Pumpset (Confirming To Is1710:2021 Standards) With 35 Ft Suitable Size Ms Column Pipe Assembly In Random Length Of 5 Ft.(Make-Jyoti/Wpil/Kirloskar) With Ss/Bronze Impeller Capable To Discharge 216 M3/H Against A Total Head Of 68M Coupled With Vertical Solid Shaft Tefc Ie3,Ip55 Type Squirrel Cage Induction Motor (Make-Siemens/Crompton/Abb) Operating On 3 Phase 50 Hz,415V+- 10% Supply And Having Speed 1400-1500 Rpm (Bhp Of Motor Should Be 10% More Than That Of Pumpset Including Cost Pof Supplying,Fitting And Fixing Of All Required Accessories , Repairing Of 80 Hp Vt Pump Set At Raw Water , Supplying All Labour Tools And Tackles For Taking Out The 40Hp Vt Pump Set With Bowl Assembly, Column Pipe And Line Shaft Etc. , Cost Towards Dismantling Of Complete Bowl Assembly. , Cost Towards Repairing And Fitting The Parts Of Vt Pumpset As Per Requirement (Works As Complete Overhauling Of The Pump) Such As:- 1.Machining/Lathe Work 2.Changing Ss Top Shaft,Line Shaft(2 Nos Of 5 Feet) Of And Bottom Shaft 2.Repairing Of Bowl Assembly And Impleller 3.Supplying And Fitting C.L Spider Bearing With Rubber Cut Less Bush-4Nos 4.Supplying And Fitting Of Worn-Out Nut-Bolts,Bolt-Nut Washer,Gland Body Bush Machining,Other Machining Works,Etc As Per Requirement , Complete Assembling The Pump Set And Lowering Including Supplying All Petty Materials. , Cost For Supplying And Installation Of Required Accesories For Repair And Maintenance Of Motor Control Panel Such As:- 150 annual periodical maintenance Contactor-2 No (For 1 No Starter) 160 Amp,Breaking Capacity -36Ka Mccb - 1 No 56-90 A Electronic Overload Relay-2 Nos Timer-2 Nos Volt Meter - 1 Nos annual periodical maintenance Motor - 1 Nos Pilot Lamp - 6 Nos Selector Switch - 4 Nos Single Phase Preventer - 2 Nos [ All Accessories Of Reputed Make] With Complete Internal Wiring With Suitable Size Of Copper Wire And Testing On Load. , Repairing Of 30Hp C/F Pump Sets At Clear Water , Cost For Dismantling Of 30 Hp C/F And Pump Inspection,Changing Of Its Damaged Parts Such As:-Key-01 No, Gland Tightner -1 Set, Gland Tightner Stud-2 Nos, C.I Bearing Housing With Cap -1 Set, Ball Bearing 6306 (Skf)-2 Nos, Grease, Gland Packing,Maching Of The Pump Parts As Per Required Etc All Complete And Testing On Load Etc. , Cost Towards Complete Repairing Of Motor Control Panel Starter 30Hp Cf Pump Set Opening And Changing Of Damaged Parts Such As 1.Mccb - 50 Amp,25Ka,3Pole-2 Nos (For Motor Backup Protection),Mccb -100 Amp,50Ka,3Pole-1 No (Main Mccb) 2.Overload Relay 26-40 Amp-1No 3.Star Delta Timer-1No 4.Digital Volt Meter,Ampere Meter,Three Pahse Indicator Lamp,Push Button On/Off,On/Off/Trip Indicator,Wiring,Etc As Per Required , Repairing Of 15Hp C/F Pump Sets At Clear Water , Cost For Dismantling Of 15Hp C/F And Pump Inspection,Changing Of Its Damaged Parts Such As:-Key-01 No, Gland Tightner -1 Set, Gland Tightner Stud-2 Nos, C.I Bearing Housing With Cap -1 Set, Ball Bearing 6306 (Skf)-2 Nos, Grease, Gland Packing,Maching Of The Pump Parts As Per Required Etc All Complete And Testing On Load Etc. , Cost Towards Complete Repairing Of Motor Control Panel Starter 30Hp Cf Pump Set Opening And Changing Of Damaged Parts Such As 1.Mccb -25 Amp,15Ka,3Pole-2 Nos (For Motor Backup Protection),Mccb -50 Amp,25Ka,3Pole-1 No (Main Mccb) 2.Overload Relay 20-25 Amp-1No 3.Star Delta Timer-1No 4.Digital Volt Meter,Ampere Meter,Three Pahse Indicator Lamp,Push Button On/Off,On/Off/Trip Indicator,Wiring,Etc As Per Required
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 1
6.
Public Administrative Department #11458204 Technical Bid
supply and installation of electrical material and repairing, rewinding of motor pumps required and supply of material for daily repair works of water supply pipe line and pumps on for daily repair works of water supply on yearly basis , cable , 2.5 sq.mm submersible cable three core (copper) isi mark , 4 sq.mm submersible cable three core (copper) isi mark , 6 sq.mm submersible cable three core (copper) isi mark , 10 sq.mm submersible cable three core (copper) isi mark , 16 sq.mm submersible cable three core (copper) isi mark , 25 sq.mm submersible cable three core (copper) isi mark , 35 sq.mm submersible cable three core (copper) isi mark , cable with aluminum armored 3 core 50sqmm , cable with aluminum armored 3 core 70sqmm , fuse cut out , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 300 ampere , fuse wire , 16 ampere , 32 ampere , 63 ampere , 100 ampere , m.c.c.b l &t make , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 250 ampere , 300 ampere , 500 ampere , h.r.c.fuse , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 250 ampere , 300 ampere , 500 ampere , main switch 3 pole , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 250 ampere , providing and erecting transformer new ab switch complete set. , l.t. l.k. mk -1 dol starter 3 h.p./5 h.p. , no volt coil , contact patti set , relay , contact block , new starter set for 3 h.p./5 h.p. , 15/10 h.p. starter /star delta starter (l&t make mk-1) , no volt coil , contact patti set , relay , contact block , new starter set for 10 h.p./15 h.p. mk -1 , new starter set for 10 h.p./15 h.p. mu-g20 , contactor , mnx -225 , mnx -110 , mnx -a2 , mnx -a1 , mnx -25 , mnx -9 , ml -2 , ml -4 , oil starter 50 h.p. , contact fix patti , contact moving point , no volt coil , fibre plate , conection plate , starte minoir repairing , supplying & erecting new connection terminal beckelite connection plate with copper lugs & copper nut bolt for 50 hp , l&t co2-200 cos - 200a , l&t thermal overload relay mn 12 ct ratio 30 , single phase preventor minilec make , l&t capacitor 1/3 phase , l&t main switch dn-3 630 d , l&t mccb dn-2 250a , l&t mccb du-250 , relay 30a- 50a , relay 20a- 33a , fn 100 tpn switch disconnector fuse unit , l&t make fasd starter ml 1.5 suitable for 10/15 hp , 50 h.p.ats starter , timer , auxiliary switch , on off switch , no volt coil , monir repairing , 80 h.p. ats starter , timer , auxiliary switch , on off switch , monir repairing , 100 h.p. ats starter , timer , auxiliary switch , on off switch , monir repairing , aluminium lugs , 16 mm , 25 mm , 35 mm , 50 mm , 70 mm , 95 mm , 120 mm , 150 mm , 185 mm , 240 mm , 300 mm , copper lugs , 16 mm , 25 mm , 35 mm , 50 mm , 70 mm , copper bus bar , crimping tool manual , crimping tool hydraulic operated , transformer bush hv/lv 63/100/160/ kva , transformer rod hv/lv 63/100/160 kva , transformer oil filter , transformer new oil filling (filtered) , rewinding of motors , 1 hp el. motor (mono block) rewinding with material and labour , 3 hp el. motor (mono block) rewinding with material and labour , 5 hp el. motor (mono block) rewinding with material and labour , 10 hp el. motor (mono block) rewinding with material and labour , 15 hp el. motor (mono block) rewinding with material and labour , 1 hp el. motor (submersible) rewinding with material and labour , 2 hp el. motor (submersible) rewinding with material and labour , 3 hp el. motor (submersible) rewinding with material and labour , 5 hp el. motor (submersible) rewinding with material and labour , 7.5 hp el. motor (submersible) rewinding with material and labour , 10 hp el. motor (submersible) rewinding with material and labour , 15 hp el. motor (submersible) rewinding with material and labour , 20 hp el. motor (submersible) rewinding with material and labour , 30 hp el. motor (submersible) rewinding with material and labour , 35 hp el. motor (submersible) rewinding with material and labour , 80 hp el. motor (submersible pump ) rewinding with material and labour , 100 hp el. motor (submersible) rewinding with material and labour , 3 hp el. motor (submersible mono block) rewinding with material and labour , 5 hp el. motor (submersible mono block) rewinding with material and labour , 7.5 hp el. motor (submersible mono block) rewinding with material and labour , 10 hp el. motor (submersible mono block) rewinding with material and labour , 15 hp el. motor (submersible monoblock) rewinding with material and labour , 30 hp el. motor (submersible mono block) rewinding with material and labour , 50 hp el. motor (vt pump ) rewinding with material and labour , 2 hp mud pump set (vertical) rewinding with material and labour , 3 hp mud pump set (vertical) rewinding with material and labour , 5 hp mud pump set (vertical) rewinding with material and labour , 10 hp mud pump set (vertical) rewinding with material and labour , 15 hp mud pump set (vertical) rewinding with material and labour , minor repairing/ overhauling of pumps , 1 hp pump , 2 hp pump , 3 hp pump , 5 hp pump , 10 hp pump , 15 hp pump , 30 hp pump , 80 hp pump , repairs and maintenance 50hp vt pump for igatpuri city water supply scheme vertical turbine pump (water lubricated) incliding dowl assembly and discharge hed etc. on provided channel/rsj/rcc beam including erecting on providing sole plate with blue matching , a) removing , b) dismenting , bowl assembly loading, unloading, scrapping & cleaning, checking the bowl assembly… etv complete , making bowl shaft remetalising, machining, impeller fiting size machining… etc complete , making bowl bush bronze metal machining pressing thrugh & boaring… etc complete. , making impeller and impeller neck ring through cut& balancing work… etc complete. , making bowl body neck ring machining as per required impeller size… etc complete. , making impeller collet and lock machining and fitting… etc complete. , making new strainer with stainless steel jail… etc complee , supplying misc sundry & hardware material like new nut bolt gasket packing and gland packing… etc complete. , making threading work for line shaft of 5ft length and facing through polish… etc complete. , making line shaft new coupling as sleeve reconditioning and thrugh polish… etc complete. , making gland shaft stainless steel remetalising machining and through polish… etc comlete. , making old (gm) impeller nackring repairing on lathe machine work…etc complete. , bowl assembly, dismentaling & removing al parts and re-installing property labour charges. , making new line shaft 316 materal including of lathe machining work. , making rubber bush reconditioning…etc complete. , providing and erecting new rubber spider. , making 250mm column pipe-each 5 feet length scrapping & de rusting colouring and painting work…etc complete , transportation of dismantled parts of pump fom raw water pumping to nashik work shop including loading unloading…etc complete , transportation of dismantled parts of pump after repairing from nashik work shop to raw water pumping site with loading unloading …etc complete , assembling and re-erection of 50hp vt pump set at actual site. , supplying & erecting new coupling set with nut bolts and rubber. , supplying & erecting new line shaft s.s lenght – 5 feet. , supplying & erecting new line shaft coupler , supplying & erecting new line shaft sleeve , supplying & erecting new bowl shaft , repairs and maintenance 50hp vhs electric motor for , a) removing 50 hp vhs electric motor , b) dismantling 50 hp vhs electric motor , transportation of above motor form nashik work shop site to raw water pumping including loading & unloading with tools & tackles etc complete , rewinding and repairs of squirrel cage including motors 440 v,3 phase 50 cycles/sec, 1500 rpm with b class insulation including heating, oven baking varnishing, painting etc complete. (60 hp motor) , supplying taper roller bearing fag x-life 29326 , supplying ball bearing 6320 , supplying gland packing 20 mm , supplying champion packing 3m x 200m , a) assembling 50hp vhs electric motor , b) re- erection of 50hp vhs electric motor , transportation of dismantled parts of pump after repairing from nashik work shop to raw water pumping site with loading unloading …etc complete , supplying & erecting new connection terminal backlit connection plate with copper lugs & copper nut bolt for 60hp motor , supplying copper lugs 70sq.mm , 3 hp motorpump replacement of bearing (submersible/monoblock) , 5 hp motorpump replacement of bearing (submersible/monoblock) , 10 hp motorpump replacement of bearing (submersible/monoblock) , 15 hp motorpump replacement of bearing (submersible/monoblock) , 30 hp motorpump replacement of bearing (submersible/monoblock) , 80 hp motorpump replacement of bearing (submersible/monoblock) , 100 hp motorpump replacement of bearing (submersible/monoblock) , 50 hp motor pump replacement of bearing (turbine pump upper bearing ) bearing no. 7317 bep , 50 hp motor pump replacement of bearing (turbine pump lower bearing ) bearing no. 6212 , minor repairing of electric panels , 5 hp pump panel , 10 hp pump panel , 15 hp pump panel , 30/35 hp pump panel , 50 hp pump panel , 75/80/85 hp pump panel , repairing of 50 hp vfd panel (minor) , repairing of 50 hp vfd panel (major) , repairing of 80 hp vfd panel (minor) , repairing of 80 hp vfd panel (major) , rewinding of tranformer 63 kva , rewinding of tranformer100 kva , rewinding of tranformer 160 kva , supply & installation of new tranformer 63 kva , supply & installation of new tranformer 100 kva , supply & installation of new tranformer 160 kva , supply & installation of new 0.5 hp motor monoblock ( crompton/kirloskar/abb) , supply & installation of new 0.5 hp pistion pump set , supply & installation of new 3 hp motorpump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 5 hp motor pump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 5 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 5 hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 10 hp motor pump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 10 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 10 hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 15 hp motor pump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 15 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 15hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 30/35 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 75/80 hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 2 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 3 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 5 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 10 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 15 hp mud pump set (vertical) (ksb/kirloskar) , providing and erecting of flow meter repairing complete , repairing of flow meter transmitter card , replacements of flow meter electronic sensor , replacement of sensor cable , repairing of constant voltage transformer , repairing of flow meter display card , replacement of smps of flow meter , supplying & erecting 300mm size flow meter , supplying & erecting 200mm size flow meter , providing and supplying in standard lengths isi mark rigid unplasticised pvc pipes suitable for potable water with solvent cement joints including cost of couplers, as per is specification no. 4985 / 1988 excluding gst levied by gol and gom in all respect,including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).(as per mjp dsr 2018-19) , working pressure 4 kg./sq.cm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , working pressure6 kg./sq.cm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , providing and supplying in standard lengths isi mark rigid upvc pipes , 15 mm , 20 mm , 25 mm , 63 mm , providing isi mark gi. pipe of following class and dia. including all statutory duties & taxes such as gst levied by goi & gom in all respect, inspection charges, transportation to stores, etc. complete as per is-1239/2004. , medium , 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , supply of necessary items related to hard wares required for daily repair works of water supply pipe line on yearly basis , upvc elbows 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 3 inch , upvc mta 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , upvc fta 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , pvc reducer , size 1/2 x 3/4 inch , size 3/4 x 1 inch , size 1 x 1 1/2 inch , size1 1/2 x 2 inch , size 2 x 2 1/2 inch , size 2 x 3 inch , size 2 1/2 x 3 inch , size 3 x 4 inch , size 4 x 5 inch , size 4 x 6 inch , size 5 x 6 inch , upvc reducer , size 1/2 x 3/4 inch , size 3/4 x 1 inch , size 1 x 1 1/2 inch , size1 1/2 x 2 inch , size 2 x 2 1/2 inch , size 2 x 3 inch , size 2 1/2 x 3 inch , pvc end cap plains 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , upvc end cap plains 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , pvc end cap threaded 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , upvc end cap threaded 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , g. i. end cap threaded (inside threaded ) , size 1/2 inch , size 3/4 inch , size 1 inch , g. i. end cap threaded (outside threaded ) , size 1/2 inch , size 3/4 inch , size 1 inch , pvc socket 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , size 8 inch , upvc socket 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , pvc bend 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , size 8 inch , upvc bend 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , upvc ball valve , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , pvc ball valve , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , g. i. bend , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , g. i. socket , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , g. i. elbow , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , g. i. tee , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , g. i. barrel nepple , 1/2 x 3 , 1/2x 4 , 1/2x 6 , 1/2 x 9 , 1/2x 12 , 3/4x 3 , 3/4x 4 , 3/4x 6 , 3/4x 9 , 3/4x 12 , 1x 3 , 2x 3 , 3 x 5 , pvc repairing coupler elastomatric , 63 mm. , 75 mm. , 90 mm. , 110mm , 160 mm. , pvc solution , 20 ml , 50 ml , 100 ml , 200 ml , upvc solution , 20 ml , 50 ml , 100 ml , 200 ml , 500 ml , m-seal , 10 gm , 50 gm , 100 gm , 200 gm , 500 gm , taparia spanners open ended , 10-11. , 12-13. , 14-15. , 16-17. , 18-19. , 20-21. , 22-23. , 24-25. , 26-27 , 28-29 , 30-31 , 32-33 , 34-35 , ring spanner , 10-11. , 12-13. , 14-15. , 16-17. , 18-19. , 20-21. , 22-23. , 24-25. , 26-27 , 28-29 , 30-31 , 32-33 , 34-35 , valve cap , 2 valve cap , 3 valve cap , 4 valve cap , 6 valve cap , 8 valve cap , 10 valve cap , 12 valve cap , 14 valve cap , air valve ball , 2 valve ball , 3valve ball , 4 valve ball , 5 valve ball , 6 valve ball , abrasive grinder wheel fo size 6 , abrasive grinder wheel fo size 8 , abrasive grinder wheel fo size 10 , 18(450 mm) size venus/ taparia pipe wrench , 14(350 mm) size venus/ taparia pipe wrench , 12(300 mm) size venus/ taparia pipe wrench , 9(2253 mm) size venus/ taparia pipe wrench , tikav arm (tikav danda) , tata tikav , favada arm ( favada danda) , tata favada , nut bolts as per requirement , nylon rope , industrial rubber sheet , hack -saw frame , gland , hack -saw blade , providing and fixing in position m.s. air valve boxes fabricated with 2mm thick m.s. plate, 30 x 30 x 3 mm size m.s. angle frame, concreting in m-150 for fixing the box in position, appling two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by engineer-in-charge. , for single ball air valve , for double ball air valve , providing and fixing c.i. road box including loading,unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. , 100mm x 225mm(20kg) , 225mm x 300mm(40kg) , providing , hoisting and fixing in position c.i. manhole, frame and cover of best qualify and of required size and shape with locking arrangements including applying 2 coats of anticorrosive paint, etc. complete, etc. complete. , 90 x 60 cm size and weight 35 kg , rate on weight basis for any size and type of frame and cover , providing and fixing in position m.s. ladder 0.50 m wide consisting of 75 x 10 mm m.s. flats as stringers and 16mm dia m.s. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coat of anti-corrosive paint, etc. complete as directed by engineer-in-charge. , providing and fixing water level indicator upto 5 m height including m.s. enamelled gauge plate 300mm wide 3mm thick, p.v.c. float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc. complete. , providing and fixing water level indicator upto 5 m height including m.s. enamelled gauge plate 150mm wide 3mm thick, p.v.c. float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc. complete. , rachet drill set isi mark , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , pipe die set , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , g.i. union , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , patti valve m s , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , 50 mm (2) , grease castrol , cotton rope , screw driver taparia , tester taparia , insulated electric plier 12taparia , hammer 1/2 kg , hammer 1 kg , hammer 1.5 kg , hammer 2kg , pahar 4 foot , pahar 6 foot , lock godrej 7 levers small size , lock godrej 7 levers big size , providing double flange sluice valve confirming for ls-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspectioncharges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete. , sluice valves - pn -1 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , sluice valves - pn -1.6 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , providing and supplying isi mark cl dif reflux valves (non return valves ) of following dia including raihvay freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding gst levied, by goi & gom in all respect etc. complete. reflux valves as per i.s.5312 part i (1984) , reflux valves ( non return valve) - pn -1 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , reflux valves ( non return valve) - pn -1.6 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , check nut ( phosphor bronze / gun metal) of sluice valve with machining as per spindle , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , steel wire rope , plastic bucket 10 lit. , plastic bucket 20 lit. , plastic bucket 25 lit. , ghamela/round create 10 , providing q.nd supplying lsl standard d. l. specials & fitting with sealing rubber gasket of s.b.r,complete with cast iron follower gland and m. s. nut bolts coated or otherwise protected from rusting and suitable for d.l.pipes including cost of labour, materials, and transpotlaiion to stores, loading and unhading excluding gst levied by goi & gom in all respect etc. complete as per is-9523 , for all types of specials , bends,tees etc. , 80 to 300 mm dia , providing and supplying isi standard ms specials of required thickness with 3 coats of approved nlake epoxy paint (shalimar, ciba or matiindra & mahindra make) from inside and outside excluding gst levied by goi & gom in all respect including irrspection charges, transportation to stores and stacking, etc. complete. , for all types of ms specials , bends,tees flanges etc. , providing and supplying i.s.l. mark rubber gasket suitable for c.l. or d. l. pipe nf all class for tyton joints including inspection charges, transportation upto departrnental stores excludine gst levied by goi & gom in all respect etc. complete. , s.b.r. gaskets for c. l. / dl pipes. , 80 mm. , 100 mm. , 150mm , 200 mm. , 250 mm. , 300mm , s.b.r. tyton joint rubber ring for mechanical joints , 80 mm. , 100 mm. , 150mm , 200 mm. , 250 mm. , 300mm , providing and supplying in standard lengths polvethelene pioes. confirmino to.ls 4984/14151/12786/13488 latest version with necessary jointing material li ke mechanical connector i. e.thread / insert joint / quick release coupler joint/ compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gl & gom in all respect , pe 100 6 kg/ sq.cm , 25 mm. , 63 mm. , 75 mm. , 110 mm. , concrete breaker machine hitachi make , 6 kg. , 10.5 kg. , 12.5 kg. , 16 kg. , flexible plastic ring pipe ( bangadi pipe) , 25 mm , 50 mm , 75 mm , 110 mm. , plastic drum 200 lit. , flexible rubber pipe 1/2 , flexible rubber pipe 3/4 , flexible rubber pipe 3/4 , ci / ms water tap 1/2 , ci / ms water tap 3/4 , drill tap set 1/2 , drill tap set 3/4 , sintex three layer water tank 500 lit.to 5000 lit. capacity , pvc tail piece 6 kg , 63 mm , 90 mm. , 110mm , lsupply of c. l. mechanical compression flanged / socket tailpiece (popularly known as tm flanged / socket tailpiece) suitable for making flanged connection with the plain barrel of c. l. spun pipes ( as per - ls - 1536 120o1) and d. l pipes ( as per ls: 8329 / 2000).the tailpiec to be supplied complete with sealing rubber gasket of s.b.r, c.l. follower glands and m.s. nut bolts.the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in ls:1538 /1993. the rates are inclusive of cost of material, freight charges, loading,transportation and unloading at departemental store, excluding gst levied by gol and gom in all respect, etc.complete. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , supply of c.i. mechanical compression collar coupling suitable for c.l. spun pipes (as per ls-1536/2001) and complete with sealing rubber gasket of sbr, c.1., follower glands and m.s. nut bolts. the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in ls:1538/1993) including all statutary duties and taxes such as gst levied by gol and gom in all respect . , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , supply of c.i. mechanical compression collar end cap suitable for c.l. spun pipes (as per ls-1536/2001) and complete with sealing rubber gasket of sbr, c.1., follower glands and m.s. nut bolts. the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in ls:1538/1993) including all statutary duties and taxes such as gst levied by gol and gom in all respect . , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , di pipe cutter machine heavy duty 600w ac 220- 240 v (make - bosch, hitachi) , ferrule 15mm , ferrule 20mm , ferrule 25mm , brass elbows 15mm , brass elbows 20mm , brass elbows 25mm , gi coupling , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , taplon tape , supply of hdep pipe , 100mm , 150mm , supply of hdep tail pice , 100mm , 150mm , supply of ms flange , 100mm , 150mm
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
Maharashtra View Result →
8.
Educational and Research Institute #11433319 AOC
Procurement Of Tools & Equipment For Newly Established Iti For Girls At Ghatkesar In Medchal Malkajgiri District-25.00 Cost Supply And Delivery Of Cpu: 32 / 64 Bit, 7Th Generation Or Higher, I3 Or Latest Processor, Speed: 3 Ghz Or Higher. Ram: 8 Gb Or Higher, 1Tb Hdd / Sdd, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( As Available In The Market ) . Or All In One Pc Licensed Operating System And Antivirus Compatible With Trade Related Software. Make: Dell. Cost Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of 4Th Gen Ci5 Or Higher Processor, 4Gb Ram, 1Tb Hard Disk, Win8 / Latest Preloaded Licensed Os, 2Gb Graphics Card, Dvd Writer, Standard Ports And Connectors.Make: Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of To Enable Working With Wired Networks For Practical. Make:Finolex. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Broadband Connection With Min. 2 Mbps Speed / Optical Fiber. Make:Optic Fiber. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Registered Domain At Least 100 Mb Web Space. Make: D Link.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of All In One Printer A4 Size. Make: Hp Laser Jet.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dlp Projector With Screen / Multimedia Projector With Screen / Smart Interactive Board / Smart Tv Latest Version. Make:Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Online Ups 5Kva. Make: Utl. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply, Delivery, Installation And Testing Of Open Office Or Equivalent Latest Version. Open Source Software : Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of Python / Java Jdk. Latest Version. Open Source Software : Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of Gimp Or Equivalent. Latest Version. Open Source Software: Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of E Commerce Simulation Software.Latest Version. Open Source Software: Windows. 1.00 Cost Supply, Delivery, Installation And Testing Http Web Server / Xampp Or Any Other Similar Server.Open Source Software: Windows. 1.00 Cost Supply, Delivery, Installation And Testing Of My Sql. Latest Version. Open Source Software: Windows. 4.00 Cost Supply And Delivery Of Air Conditioner 2 Ton. Make: Blue Star.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost For Tools And Eqiupments Of Electronic Mechanic Trade: Cost Supply And Delivery Of Air Conditioner Two Ton Split Ac.Make:Blue Star. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Cro Dual Trace.20 Mhz ( Component Testing Facilities ) . Make: Htc / Varteck. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Battery Charger. 0 - 6 - 9 - 12 - 24 - 48 V, 30 Amp Make:Scientech. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Function Generator Dds Technology Sine Square Triangle Ramp Pulse Serial Data Ttl And Modulation. 1 Mhz -10 Mhz Function- Pulse – Modulation Generator With Built In 40Mhz Frequency Counter.Make:Pacific. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Digital Ic Tester. Dit-02 Make: Krb / Asi / Ssl Make. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Power Electronics Trainer With At Least 6 Numbers Of Application Board Mosfet Characteristics Scr Characteristicsscr Lamp Flasher Scr Alarm Circuit Series Inverter Single Phase Pwm Inverter.Electrical Type Make:Ohm. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 3.00 Cost Supply And Delivery Of Desktop Computers. Cpu: 64 Bit I7 8 Th Gen Processor, Speed: 3 Ghz Or Higher. Cache Memory: - Minimum 3 Mb Or Better. Ram:-8 Gb . Hard Disk Drive: 1 Tb 7200 Rpm ( Minimum ) Or Higher, Wi-Fi Enabled On Board Intigrated Wifi . Network Card:Integrated Gigabit Ethernet ( 10 / 100 / 1000 ) - Usb Mouse, Usb Keyboard And Monitor ( Min. 19.5 Inch ) , Standard Ports And Connectors. Dvd Writer, Speakers And Mic. Licensed Windows 10 Pro Operating System Antivirus / Total Security Preferably Hp / Dell / Lenova. Make:Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Laptop 8 Th Gen I7 Processor, 8Gb Ram, 1Tb Hard Disk, Windows 10 Pro Preloaded Licensed Os, 4Gb Graphics Card, Dvd Writer, Standard Ports And Connectors.Preferably Hp / Dell / Lenova Make:Hp / Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Laser Jet Printer A4 Size.Make:Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Internet Broad Band Connection 300Mbps.Make:Act / Bsnl / Jio. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Electronic Circuit Simulation Software With 6 User Licenses. Circuit Design And Simulation Software With Pcb Design With Gerber And G Code Generation, 3D View Of Pcb, Breadboard View, Fault Creation And Simulation..Make:Edwin. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dso Colour. 4 Channel , 50Mhz Real Time Sampling 1G Samples / Sec, 12 Mpts Memory With Pc Interface Usb, Lan And Math Function Includes +, -, Fft, Differential, Integral, Abs, Log Etc.Make:Aet. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Soldering & De Soldering Station.200 Watt Adjustable.Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Frequency Modulator And Demodulator Trainer Kit.Fm Modulator Type : Reactance Modulator, Varactor Modulator, Vco Based Modulator Fm Demodulator Type All 5 Demodulation Techniques Detailed Teaching And Learning Contents Through Software.Make:Ohm. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Pam Ppm Pwm Trainer Kit Pam - Ppm - Pwm Trainer Kit Is A Uses Natural And Flat Top Sampling Techniques For Modulation And Demodulation Process. Features: Pam-Ppm-Pwm M. Make:Ohm. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Am Fm Commercial Radio Receivers Tr105 Portable Radio Support Fm / Am / Sw / Cb / Vhf / Air Radio Make: Krb Make. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Application Kits For Microcontrollers 6 Different Applications One Set 1.Input Interface : 4X4 Matrix Keypad, Ascii Key Pad, Four Input Switch 2. Display Module 16X2 Lcd, Seven Segment, Led Bar Graph 3. Adc / Dac Module With Most Popular Dc / Dac0808 4. Pc Interface: Rs232 & Usb 5. Motor Drive: Dc, Servo, Stepper 6. Daq: Data Acquisition To Sense Different Sensors Signals. Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Sensor Trainer Kit Containing Following Sensors 1 Thermocouple 2 Rtd 3 Load Cell Strain Gauge 4 Lvdt 5 Smoke Detector Sensors 6 Speed Sensor 7 Limit Switch 8 Photo Sensors 9 Optocouplor 10 Proximity Sensor.Graphical Touch Lcd With Inbuilt Processor For Viewing The Output Waveforms, In Built Daq, And Standard Processing Circuits Like Inverting , Non – Inverting , Power, Current , Instrumentation Differential Amplifier, F / V, V / F, V / I, I / V Converter, Sensors :Rtd, Ntc Thermistor, Lm35 Thermocouple, Gas ( Smoke ) Sensor, Load Cell, Lvdt Sensor, Speed Sensor. Make:Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Different Types Of Electronic & Electrical Cables Connectors Sockets And Terminations 1Mm Sqmm Ti 4Mm Sqmm, 3Pin Socket, 5Pin Socket, Terminal Complet Set. Make:Phenolex. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Fiber Optic Communication Trainer Full Duplex Analog & Digital Trans-Receiver With 660Nm & 950Nm, Noise Generator With Variable Gain, Four Seven Segment Display Ber Counter, Eye Pattern Make:Pacific. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Mobile Phone Trainer. 2G / 3G / 4G Dual Sim Gsm Handset.Frequency Measurement And Band Verification. Real Time Mobile Operation Make:Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Smart Phones Of Different Make ( Android / Windows ) Android / Windows Make:Nokia / Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Lcd Tv ( Trainer Kit ) 21-Inch Full Hd Lcd Color Television Should Support Pal / Ntsc Video Formats Complete Block Diagram Of A Lcd Tv System, Study Board Indicating Various Sections Of Lcd Tv Along With The Test Points And Switch Faults. Make:Sony. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Lcd Tv ( 21 ) Full Hd Telivision. Make:Samsung / Sony. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Led Tv ( Trainer Kit ) 20-Inch Full Hd Led Color Television, Pal / Ntsc Video Formats, Complete Block Diagram Of A Led Tv System, Study Board Indicating Various Sections Of Led Tv Along With The Test Points And Switch Faults Trouble Shooting In Different Sections. Make:Sony. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Solar Training Kit / Simulator With Build In Meters For Dcv Dca Ac Multifunction Meter Frequency Protection Circuits Bs-10 Terminals For Making The Connection Single / Dual Axis Traking System Charge Controller Pwm Based Mppt Charging Stage Bulk Absorptions And Float Make:Trina / Vikram. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Led Lighting System Measurement Of Power, Voltage, Current, Power Factor And Light Output Performance Of Different Lighting Products Like Led, Cfl At Variable Input Voltages 0 To 245V Variable Ac Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Tools And Equipments Of Computer Aided Embroidery And Designing Nsqf: Cost Supply And Delivery Of Over Lock Machine.3 Thread. Make:Juki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Single Head Computerized Embroidery Machine ( Multi Needle ) With Ups Pr1055x. Make:Brother Pr1055x Entrepreneur Pro X Single Head 10 Needle Computer Embroidery Machine. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply, Delivery, Installation And Testing Of Coral Draw Software. 4.00 Cost Supply And Delivery Of Desktop Computer With Ups. Cpu: 32 / 64 Bit I3 / I5 / I7 Or Latestprocessor, Speed: 3 Ghz Or Higher. Ram:-4 Gb Ddr-Iii Or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( Min. 17 Inch Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Hp / Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Laptop 12Th Generation Inte Core I5 Prosses0r O S Windos 11 Ho 1920*1080 Intel Me 16 Gb Ram, 512 Gb Ssd Hard Drive 35.6 Cm 14 Diognal Fhd. Make:Hp / Dell With Ms Office And Inbuild Windows. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Multi-Functional A3 Size Colour Printer Latest With Trolley. Make: Canon. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Printer Laser Jet Pro M 202Dw. Make: Canon. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Scanner Hp / Dell. Make: Canon. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Automatic Sewing Machine ( With Necessary Attachments ( Zip Fixing, Plcot Gathering Foot Etc. ) ( With Necessary Attachments ( Zip Fixing, Plcot Gathering Foot Etc. ) Make: Zuki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 3.00 Cost Supply And Delivery Of Air Conditioner Of 2 Ton Capacity With Stabilizer. Make:Blue Star.Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Computer Set With Ups &Multimedia Projector. Cpu: 32 / 64 Bit I3 / I5 / I7 Or Latestprocessor, Speed: 3 Ghz Or Higher. Ram:-4 Gb Ddr-Iii Or Higher, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( Min. 17 Inch Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Dell / Hp / Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Ac Unit Split Type. 2 Ton Capacity With Stabilizer. Make:Blue Star. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Ac Unit Split Type. 2 Ton Capacity With Stabilizer. Make:Blue Star. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost For Tools And Eqiupments Of Fashioon Design & Technology: Cost Supply And Delivery Of Dress Forms ( Dummies ) Children Ladies Gents ( Fibre ) . Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Computer Set With Ups & Multimedia Projector. Cpu: 32 / 64 Bit, 7Th Generation Or Higher, I3 Or Latest Processor, Speed: 3 Ghz Or Higher. Ram: 8 Gb Or Higher, 1Tb Hdd / Sdd, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( As Available In The Market ) . Or All In One Pc Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Dell / Hp / Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of White Magnetic Board With Felt Board & Accessories Of Size:17X23 ( Fibre With Wooden Frame ) . Make:Roger And Moris. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 25.00 Cost Supply And Delivery Of Sewing Machine - Single Needle Lock Stitch Industrial Model 3 Thread ( Electric Type ) . Make: Juki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Over Lock Machine 3 Thread ( Electrict Type ) . Make:Juki. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 24.00 Cost Supply And Delivery Of It Lab With Computers Setup &Installation Along With Ups Required Configuration For Software ( Corel Draw ) Cpu: 32 / 64 Bit, 7Th Generation Or Higher, I3 Or Latest Processor, Speed: 3 Ghz Or Higher. Ram: 8 Gb Or Higher, 1Tb Hdd / Sdd, Wi-Fi Enabled. Network Card: Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor ( As Available In The Market ) . Or All In One Pc Licensed Operating System And Antivirus Compatible With Trade Related Software. Make:Dell / Hp. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply, Delivery, Installation And Testing Of Designing Software Coral Draw. Latest Version Make:Coral. 1.00 Cost Supply And Delivery Of Multi Functional A4 Colour Printer. Printer With Trolly / Table. Make:Hp Laser Jet. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Lcd Projector. Make:Epson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Vacuum Cleaner.Lab Cleaning ( Latest ) . Make:Euroclean Wd X2 Dry And Wet Vacuum Cleaner. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 List Of Tools And Equipment Of Electrician Trade: Cost Supply And Delivery Of Drill Hand Brace 0-100Mm ( Stainles Steel ) Make:Hudson. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Load Bank ( Lamp / Heater Type ) .6 Kw, 3Ph Make:Kohir / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Electronic Components. Consisting Resistors, Diode, Transistor, Ujt, Fet, Scr, Diac, Traic, Igbt, Small. Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 3.00 Cost Supply And Delivery Of Bus Bar With Brackets.1 Mtr Each. Make:Siemens / L &T / Ge. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Rcc Pole With Accessories ( Ms Angle Iron, ‘C’ Clamp, Stay Insulator Etc. ) And Materials.6 Mtr Make:Superior. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Tachometer. Analog Type - 10000 Rpm Make: Metrix / Meco / System. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of G. Auto Transformer Type. Make:Krb / Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Oscilloscope Dual Trace 20 Mhz Make:V A R Tech Ss 5020 B Oscilloscope 20 Mhz Dual Channel Cro. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Oil Testing Kit 230 V, Single Phase 50 Hz 60 Va Output 0-60 Kv Variable. Make:Kiloskar / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Inverter With Battery 1 Kva With 12 V Battery, Input- 12 Volt Dc, Output- 220 Volt Ac Make:Luminous . Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Battery Charger 0 - 6 - 9 - 12 - 24 - 48 V, 30Amp. Make:Elektron . Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Solar Panel With Battery 18 Watt. Make:V-Guard / Exide. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of I5 And I7 Generation Computer Or Latest Version & Instalation 2.8 Ghz & Above, 8 Gb Ram, 500 Gb Hdd, Dvd Combo Drive, 19 / 21” Monitor, Optical Scroll Mouse, Multimedia Keyboard, 32 Bit Lan Card With Upp Port, Necessary Drivers, Etc. Or ( Latest Version ) . Make:Hp / Dell. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ink Jet / Laser Printer. Laser Jet Pro M 202 Dw. Make:Hp / Samsung. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of D.C. Shunt Generator With Control Panel, ( With Installation ) .2.5 Kw, 220V &3Phase Squirrel Cage Induction Motor, 5Hp, 440V With Control Panel & Star Delta Starter. Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Motor-Generator ( Ac To Dc ) ( With Installation ) .Squirrel Cage Induction Motor With Star Delta Starter And Directly Coupled To Dc Shunt Generator And Switch Board Mounted With Regulator, Air Breaker, Ammeter, Voltmeter, Knife Blade Switches And Fuses, Set Complete With Case Iron And Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. Induction Motor Rating: 7.5 Hp, 415V, 50 Cycles, 3 Phases. Dc Shunt Generator Rating: 5 Kw, 440V ( Output Voltage Varies 110-440V ) Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of D.C. Compound Generator With Control Panel Including Fitted Rheostat, Voltmeter, Ammeter And Breaker, 2.5 Kw, 220V &3Phase Squirrel Cage Induction Motor, 5Hp, 440V, With Control Panel & Star Delta Starterr. Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dc Series Motor Coupled With Spring Balance Load With Instalation. 2.5 Kw, 220 Volts Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dc Shunt Motor 2.5 Kw, 220 V. Make:Crompton / Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Dc Compound Motor With Starter And Switch ( With Installation ) .2.5 Kw , 220 Volts Make:Kbr / Crompton / Kiloskar. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Motor Generator ( Dc To Ac ) Set Consisting Of - Shunt Motor With Starting Compensator And Switch Directly Coupled To Ac Generator With Exciter And Switch Board Mounted With Regulator, Breaker, Ammeter, Voltmeter Frequency Meter, Knife Blade Switch And Fuses Etc. Set Complete With Cast Iron Bed Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. ( With Installation ) . Shunt Motor Rating: 5 Hp, 440V Ac Generator Rating : 3-Phase, 4 Wire, 3.5 Kva, 400 / 230 Volts, 0.8 Pf, 50Cycles Make:Kbr / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ac Squirrel Cage Motor With Star Delta Starter And Triple Pole Iron Clad Switch Fuse With Mechanical Load. ( With Installation ) 5 Hp, 3-Phase, 415 V, 50 Hz Make:Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ac Phase-Wound Slip Ring Motor With Starter Switch. 5 Hp, 440 V, 3 Phase, 50 Hz Make:Krb / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Universal Motor With Starter / Switch. 240 V, 50 Hz, 1 Hp Make:Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Synchronous Motor With Accessories Like Starter, Excitation Arrangements.3 Phase, 3 Hp, 440V, 50Hz, 4 Pole Make:Krb. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Thyristor / Igbt Controlled D.C. Motor Drive With Tacho-Generator Feedback Arrangement ( With Installation ) 1 Hp. Make:Kbr / Havells / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Thyristor / Igbt Controlled A.C. Motor Drive With ( With Installation ) .Vvvf Control 3 Phase, 2 Hp Make:Kbr / Havells / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 2.00 Cost Supply And Delivery Of Three Phase Transformer, Shell Type Oil Cooled With Delta / Star. 3 Kva , 415 / 240 V, 50 Hz Make:Kbr / Havells / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Electrical Machine Trainer – Suitable For Demonstrating The Construction And Functioning Of Different Types Of Dc Machines And Ac Machines ( Single Phase And Three Phase ) . Should Be Fitted With Friction Brake Arrangement, Dynamo Meter, Instrument Panel And Power Supply Unit. Make:Kirlosker / Siemens / Havells / Benn / Energy Pack / Crompton. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Diesel Generator Set With Changeover Switch, Over Current Breaker And Water / Air-Cooled With Armature, Star-Delta Connections Ac3 Phase, 7.5 Kva, 415 Volt Or Higher Rating Make:Bharath / Mahahendra. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Used Dc Generators-Series, Type For Overhauling Practice 5Kva. Make:Krb / Kirlosker. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Used Dc Generators- Shunt Type For Overhauling Practice 5Kva. Make:Krb / Kirlosker. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Used Dc Generators-Compound Type For Overhauling Practice 5Kva. Make:Krb / Kirlosker. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Pillar Electric Drill Machine Motorized. 12-20 Mm Capacity, 1Hp, 440V, 3 Phase, Induction Motor With Dol Starter, Bench Type. Make:Vimal / Glow. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Motorised Bench Grinder. 1 Hp. 3 Phase, 440V With Dol Starter, Double Side With Smooth And Rough Wheel With Tool Base Make:Bosch / Metro. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ceiling Fan Coil Winding Machine. 250V, 50 Hz, 1-Ф, With Speed Control. Make:Shyam. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Primary Current Injection Set.220V, 50 Hz, 1-Ф, Output Current - 200 A ( Min ) With Timer Make:Krb / Atico. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ev Charger 3 Phase Input. Make:Tata Power Ez. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 1.00 Cost Supply And Delivery Of Ev Charger ( Home ) 1 Phase Input. Make:Tata Power Ez. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete. 4.00 Cost Supply And Delivery Of Working Bench. 2.5 M X 1.20 M X 0.75 M ( Iron ) Make:Standard. Including Packing Loading Unloading And Transportation To Site Commissioning And Testing Etc., Complete.
Contract Date: Ref. Documents Contract Value : 1.12 Crore
Government Departments No of Bidders 1
10.
Public Administrative Department #11417601 AOC
Tender for Annual Tender 2026-2027 - Supply Of Electrical Goods In The Year 2026-2027 In Panagudi Town Panchayat , 1X40 W Tube Light , 1X40 W Copper Chocke , 1X40 W Tube Light Starter , Tube Light Side Holder , 4Ft.Alu.Street Light Fittings And Chock ,Starter Without Lamp , Fittings Side Tagged , Bulb Upto 100 W , Bulb Holder , Fittings Top Clamp , Insulation Pvc Taproll (10 Mtr) , 250 W Sodium Vapour Lamp , 250 W Sodium Vapour Choke , 250 W Sodium Condenser (33Mfd) , 250 W Sodium Vapour Ignator , 250 W S.V. Lamp Holder , 250 W S.V.Fittings Complete Set (Without Lamp) , 150 W Sodium Vapour Lamp , 150 W S.V.Chocke , 150 W S.V.Condencer , 150 W S.V.Ignator , 150 W S.V.Fittings , 150 W S.V.Holder , 70W S.V.Lamp , 70W S.V.Chocke , 70W S.V.Condencer , 70W S.V.Ignator , 70W S.V.Fittings , 70W S.V.Holder , 125 W M.V.Chocke , 125 W M.V.Condencer , 125 W M.V.Holder , 125 W M.V.Lamp , 1X40 Watts Heavy Duty Electronics Chocke , 400 W M.H.Lamp , 400 W M.H.Chocke , 400 W M.H Ignator , 400 W M.H.Condencer , 400 W M.H Flood Light Fittings , 400 W M.H Control Gear Box , 250 W M.H. Lamp , 250 W M.H.Chocke , 250 W M.H Ignator , 250 W M.H.Condencer , 250 W M.H.Fittings , 150 W M.H.Lamp , 150 W M.H.Chocke , 150 W M.H.Ignator , 150 W M.H Condencer , 150 W M.H.Fittings , 70W M.H.Lamp , 70W M.H.Chocke , 70W M.H.Fittings , 1/18 Pvc Copper Wire (90 Mtr) , 3/20 Pvc Copper Wire (90 Mtr) , 7/20 Pvc Copper Wire (90 Mtr) , 7/18 Vir Copper Wire (90 Mtr) , 7/16 Pvc Copper Wire (90 Mtr) , Hookup Wire (90 Mtr) , 1.5 Sqr Mm Alu. Wire (90 Mtr) , 3/20 Pvc Aluminium Wire (90 Mtr) , 7/20 Pvc Aluminium Wire (90 Mtr) , 18 Pvc Aluminium Wire (90 Mtr) , 7/16 Alu.Pvc Wire (90 Mtr) , Silk Wire 2Core Copper , S.V.Clampset With Bend Pipe , T5 Fitting Clampset, Bend Pipe With Wire , Cfl Fittings Clampset With Bend Pipe , St.Light Clampset Bend Pipe , Sodium Vapour Acurlic Cover , St.Light Fittings Acurlic Cover , Cfl Acurlic Cover , St. Light Automatic On/Off Digital Timer Control Panel Board With 40Amps Contactor.. , St. Light Automatic On/Off Mechanical Timer Control Panel Board With 40Amps Contactor. , 7 Days Mechanical Clock , Electronics 7 Days Digital Clock , Electronics 7 Days Clock Battary , 40Amps Contactor Control Switch , Contactor Coil 220V-250V , St.Light Switch Box, Main,Clampset With Service Pipe , T5 2X24 Watts Power Saver Chock. , T5 Power Saver Lamp 24 Watts , 2X24 Watts T5 Flourescent Power Saver Street Light Alu. Die Cast Fittings(Ip 65) With Lamps. , 2X14 Watts T5 Flourescenr Power Saver Street Light Alu Die Cast Fittings(Ip 65) With Lamps. , 4X24w T5 Flourescent Power Saver Alu Fitting, Chock With Lamps. , T5 Power Saver Patt Fittings With Lamp 28Watts , 36W Compact Flourescent Lamp(Cfl). , 36Watts Cfl Chocke , 1X36 Watts Compact Flourescent Lamp (Cfl) Fittings, Industrial Electronics Type Chock Withlamp , 2X36 Watts Alu St. Light Compact Flourecent Lamp(Cfl) Fittings, Industrial Electronics Type Chock Withlamp . , Fan (Crompton) , Gi Wire 7/20. , Gi Wire 20 No. , Hand Clous Set , Solar Light Post 11Watts Cfl With All Accessories Complete Set , D.P Switch 32A/240V , Solar Light Post 15Watts Led With All Accessories Complete Set , Solar Light Post 20 Watts Led With All Accessories Complete Set , Solar Light Post 10Watts Led With All Accessories Complete Set , Cfl 20 Watts Direct , Cfl 15 Watts Direct , Fuse Unit 16/240 Volt , Fuse Unit 16/415 Volt , Fuse Unit 32/415 Volt , Fuse Unit 63/415Volt , Fuse Unit 100/415 Volt , Fuse Unit 200/415 Volt , Fuse Unit 400/415 Volt , Main Switch 16/240 Volt , Main Switch 32/240 Volt , Main Switch 32/415 Volt , Main Switch 63/415 Volt , Main Switch 100/415 Volt , Main Switch 200/415 Volt , Single Pole Mcb , 4Pole Mcb , Mcb Box , 20 W Led Street Light Luminaire Comprising Of Epoxy Power Coated Hsg. Enclosed With Glass Cover In Frame. , 24 W Led Street Light Luminaire Comprising Of Epoxy Power Coated Hsg. Enclosed With Glass Cover In Frame. , 30 W Led Street Light Luminaire Comprising Of Epoxy Power Coated Hsg. Enclosed With Glass Cover In Frame. , 48W Led Street Light Luminaire Comprising Of Epoxy Powder Coated Hsg. Enclosed With Glass Cover In Frame. , 50W Led Street Light Luminaire Comprising Of Epoxy Powder Coated Hsg. Enclosed With Glass Cover In Frame. , 72W Led Street Light Luminaire Comprising Of Epoxy Powder Coated Hsg. Enclosed With Glass Cover In Frame. , 90W Led Street Light Luminaire Comprising Of Epoxy Power Coated Hsg. Enclosed With Glass Cover In Frame. , 100W Led Street Light Luminaire Comprising Of Epoxy Power Coated Hsg. Enclosed With Glass Cover In Frame. , 120W Led Street Light Luminaire Comprising Of Epoxy Powder Coated Hsg. Enclosed With Glass Cover In Frame. , 200W Led Street Light Luminaire Comprising Of Epoxy Powder Coated Hsg. Enclosed With Glass Cover In Frame. , 24W Led Chip , 48W Led Chip , 50W Led Chip , 72W Led Chip , 90W Led Chip , 100W Led Chip , 120W Led Chip , 200W Chip , 24W Led Driver , 48W Led Driver , 50W Led Driver , 72W Led Driver , 90W Led Driver , 100W Led Driver , 120W Led Driver , 200W Led Driver , Solar Light Post 15Watts Led With All Accessories Complete Set , Solar Light Post 20 Watts Led With All Accessories Complete Set , Solar Light Post 10Watts Led With All Accessories Complete Set , 2X24w Industrial Electronic Choke , 2X36w Cfl Choke , 1X36 Industrial Cfl Choke , 4 Pin Cfl Holder , 24W T5 Holder , 100*120 Capacitor , 50Mfd Capacitor , 20W Led Tube Set (Wall Fittings) , 40W Flouresent Tube Set (Wall Fittings)
Contract Date: Jun 30, 2026 Contract Value : 8.90 Lakh
Local Bodies No of Bidders 3
11.
Educational and Research Institute #11403991 AOC
Purchase Of Psychology Equipment , Aesthesiometer (Divider Typ) (Two Point, Graduated Aesthesiometer,All Metal Electro Plated) , Colour Mixer (Also Called Colour Wheel) (Electrically Operated. Variable Speed. Used For Study Of Visual Phenomena Of Colour Perception Of Complementary And Non-Compelmentary Colour Development) , Colour Contrast Apparatus (Different Colour Plates Are Used To Show The Phenomenon Of Colour Contrast. An Indispensable Apparatus To Introduce The Said Phenomenon.) , Successive Contrast Or After Image Apparatus: (The Phenomenon O£ After Image Can Be Studied. The Apparatus Is Handy, Well Furnished And Provides All Materials Required For Studying The Said Phenomenon.) , Depth Perception Apparatus:(The Box With 3 Needles Provides Enough Room For Studying The Depth Perception With Electric Bulb.) , Lifted Weights Set (Metal): (A Set Of 12 Metal Tubes With Removable Or Fixed Tops Containing Certain Weights. Fine Finish And Superior Quality. This Is Required In Weight Discrimination Experiments In Psychophysics For Differential Limen (Dl), Upper Differential Limen U Dl), Lower Differential Limen (Ldl) Determination.) , Muller-Lyer Illusion Figure (With Stand & Scale): (A Study And A Handy Set Of Mullerlyer Illusionfigure. Horizontal Type With A Stand To Adjust The Figure To The Desired Eye Level Of The Subjects. Variable Figure Operated By Smooth Sliding Of The Figure (In Front Of The Experiment) On An Attached Mm Scale. Fine Ficish And Superior Quality Of Work (20‘) , Answer Sheets For Muller- Lyer Illusion (A Pkt.Of 100) , Size-Weight Illusion (Collins-Drever Model) (A Set Of 24 Tubes With Two Standard Stimuli Of Different Weights. Fine Finishing And Superior Quality. Supplied In A Wooden Handy Box.) , Vertical Horizontal Illusion. (T And L Forms With Stand And Scale.) , Optical Illusion Chart:(Cloth Bound Showing Fifteen Well-Know A Illusion, Five Each Of Extent, Direction And Perspective.) , Phi-Phenomenon Apparatus: Electronics.(Consists Of Two Lights Holding Small Cabins With Variable Positions And Time Exposures. Requires Marcury Cup Metronome Also, If An Automatic Operation Of The Apparatus Is Desired.) , Perception-Influence Of Set:(Two Sets Of 12 Cards, Each Of Which Contains A Pair Of Geometrical Figures. One Series Introducing A Set And The Other Serving As An Experimental Series Ideal For Studying Influence Of Set) , Visual Space Perception Apparatus:(Consists Of Well Polished Wooden Box(Size: 30X12X L9J. Having Two Fixed Lights And A Third Movable One With Slides In The Box Perpendicular To The Plane Formed By Tbe Two Fixed Uprights. A Fixed Scale On Top Of The Box Enables One To Find Errors. The Inside Of The Box Is Illuminated By Means Of Two Lamps. Viewing Slit Is Provided On The Smaller End.) , Vase And Face Figures. (In 5X 5 Size On Sturdy, Iraported Card Board. , Galton Bar: (It Is One Of The Early But Still Very Popular Psychophysical Experiments To Demonstrate The Problems Of Subjective (Psychological) Equality. , Whipples Weight Box: (Consists Of 2 Standards And 20 Comparison Weights. The Weights Are Made Out Of Light Metal And Not Of Cardboard As Made By Some Foreign Firms. Supplied With An Attractive Box Lined With Velvet To Hold Weights In Individual Compartments) , Shape And Size Discrimination Apparatus:((T.K.K. Japan Model) This Device Examines The Subjects Size Discrimination Ability Relying Upon Visual And Tactile Sensations As Well As Speed Of Shroting. The Subject Inserts 50 Small Discs Or Coins. Which Are Different In Size And Thickness In Five Different Ways, Into The Corresponding Slit Of Holes As Fast As Possible. The Practice Is Allowed Only Five Times And The Test Is Repeated Twice.) , Colour Preference Cards:(A Set Of 8 Cards Of Different Colours.Can Be Exposed Through The Gravity Tachistoscope) , Colour Preference Wheel: Colour Preference Wheel:(Used For Colour Preference. Using Pair-By-Pair Comparison Method Colour Reference Wheel Is Operated.) , Conflict Board:(With Step Down Transform Mer And A Pad Of 84 Sheets Along With Manual For Demonstrating Experimentally The Reactions To (1) Approach-Avoidance, (2) Approach-Approach, (3) Avoidance Avoidance And (4) Double Approach-Avoidance Situations. A) Manual Available) , Card Sorting Square Tray:(A 4X4 Square Tray Has Been Specially Designed To Eliminate Space Error On Changing The Position Of The Tray. The Pigeon-Hole Numbers Can Be Changed Into Four Different Patterns Simply By Changing The Position Of The Movable Plywood Back Of The Tray, Fine Finish And Superior Quality Work.) , Electric Maze (Human Maze ):(Two Desig Ns On The Same Maze (One For The Experimenter And The Other For The Subject Alternately). Teak Wood, Light Or Sound Signals For Count Ing Errors. Impulse Counter Can Also Be Used. Specially Planned According To The Designs Of The Mazes To Plot The Procedure And Progress Of Learning From Trial To Trial. 420 Points. With Manual. (A)Ebonite Stylus (B)Electrically Operated (C)Electrically With 6 Digits Error Counter (D)Electronics With Digital Timer & Counter. (E)Record Blanks.For Mazes 1 And 2, (A Pkt. Of 100) , Electric Maze Witb Stylus (Human Maze):(Finished With Good Polish, Having 219 Contacts And A Binding Post. Supplied With Stylus.) , Learning By Recognition Method:(A Set Of 35 Cards With Instruction Sheets.) , Slot Maze:(Designed Completely Controlled) , Memory Drum:(Electrically Operated, Four Variable Speed, High-Quality) , Immediate Memory Spantest:((English): (A)Form A (A Pad Of 100)(B)Form B (A Pad Of 100 ) (C)Manual) , Mirror Drawing. (Apparatus: Size 15X 12” X 3/4 Folding Type. Plywood Surface With Hard Plastic Base To Assure Smooth Movement Of The Stylus On Which The Metallic Pattern Is Fixed. For The Electrical Operation, Over All Body Is Made Of Plywood. With Manual: (A)Electrically Operated (B)Electrically With 6 Digits Error Counter (C)E1ectronics With Digital Timer & Counter.) , Mirror Drawing Apparatus: (For Hand Operation, With A Wooden Cover And Star Sheets.) , Short-Term-Memory Test By C.B.Dwivedi (English) ((A)Manual (B)Cards Of Ccc Trigrams (A Pkt. Of 15) (C)Cards Of Meaningful Triads (Pkt.Of 15) , Long-Term Memory Test By C.B. Dwivedi (English):((A)Manual (B)List Of Words For Recognition Test (A Pkt. Of 100) , Pyramid Puzzle:(The Pyramid Problem Involves Placing A Series Of Graduated Blocks On One Of Three Posts Such That A Larger Block Is Never Placed Over A Smaller Block. Useful For Demonstration Of Problem Solving. In Sight Learning And Concept Formation. Average Solution Time With New Subject Is About 20 Min. Repeated Trials With The Same Subject Will Produce Successively Shorter Solution Time.) , T-Puzzle:(For Problem Solving Studies. All Made Up Of Plastic, Superior Quality And Fine Finish) , M-Puzzle (For Problem Solving Studies. All Made Up Of Plastic, Superior Quality And Fine Finish.) , Habit Interference Board With Cards. , Conditioned Reflex Apparatus:(A Thick Glass Plate Is Fixed In A Wooden Frame To Which Is Attached A Felt Hammer. The Hammer When Released Will Fly Up And Strike The Glass In Front Of The Eyes Of Subject. This Is Attached To Head Rest And Can Be Adjusted To Any Height. The Apparatus Is Mounted On A Table By Means Of Clamp Supplied With It. Used For Eyelid Conditioning Experiment.) , Pencil Maze:(A Durable Aluminium Maze With A Hard Surface Bottom To Prevent Grooving. Standard 8.5Al1” Paper Placed Under The Maze Produces A Permanent Record Of Subjects Performance. Can Be Used For A Variety Of Learning Problems.Subjects Are Blind Folded When Tracing The Maze. Speed As Well As Accuracy Can Be Studied Witb The Aid Of A Stop Watch Or Clock Timer.) , Human Problem Solving By C.B. Dwivedi (English):)With Instructions,Designof Experiment And Calculation Procedures. May Also Be Used For Studying The Influence Of Set On Problem-Solving. (A)Booklet : (I) 30 Problem Work Sheets (A Pkt. Of 100) (Ii) 6 Problem Sheets For Studying The Influence Of Set (A Pkt. Of 100) (B)Manual , Water-Jar Problem Solving Test By N.K. Jain:(A Series Of 15 Problems Illustrated Jar Wise. This Is Ideal For Studying Problem Solving In Real-Life Setting. Four Problems Introduce The Situation Followed By Difficult Ones. To Be Used For Studying Effect Of Set On Problem Solving (A)Test Booklet (A Pkt. Of 100) (B)Manuai) , Nonsense Syllables Or Meaningless Word Lists (English)(: From 3 To 11 Syllables. Printed On White Paper And Also In List Form (Set Of 3 Pads) , Paired Associates Word Lists (English): (From 2 To 6 Words. Printed On Separate Sheets (Set Of 4 Pads).) , Massons Disc:(Used To Study The Fluctuations Of Attention.) , Span Of Attention Cards.(A Set Of 12 Cards Having Equal Sized Dots (From 3 To 14) Scattered Randomly. With An Instruction Sheet. Ta)Answer Sheet (A Pkt. Of 100) , Doc Figures (Same Dot Figures Are Used In Studying The Phenomenon Of Attention) , Tachistoscope(Jaiota-Gravity Type):( Tachistoscope With Three Different Adjustable Windows. The Tachistoscope When Unfolded Provides An Automatic Screen Between The E And S. All Leak Wood, Fine Gray Paint Or Polish. With Manual) , Tachistoscope(Fall Type):(Can Be Used For The Study Of Span Of Apprehension And Memory. All Teak Plywood Made, Fine Polish Or Gray Paint. Smooth And Comparatively Noiseless Operation Attempted.) , Judging Emotions From Photographs:(A Set Of 12 Photographs.) , Division Of Attention Board Apparatus:(Electrically Operated With Error Counter.) , Colour Preference Cards:(A Set Of 8 Cards Of Different Colours. Can Be Exposed Through Gravity Tachistoscope) , Colour Preference Wheel :(Used For Colour Preference. Using Pair By Pair Comparison Method Colour Preference Wheel Is Operated.) , Vernier Type Chronoscope:(Specially Made Of Heavy Bottom (All Metal) To Prevent Any Accidental Movements.) , R.T. Apparatus:(Giving Choice R.T. Using Two Light Stimuli) , Mental Fatigue Test By N.K. Jain (English):(With Instruction Sheet. (A) Numerical Sheets (A Pad Of 100) (B) Alphabetical Sheets (A Pad Of 100) (C) Instruction Sheet) , Work And Rest Test By M.C. Joshi (English):(A)Alphabetical Sbeets : Form A For Work (A Pkt. Of 100) (C)Numerical Sheets : Form A For Work (A Pkt. Of 100) (C)Manual , Normal Curve Demonstration Apparatus (Laffayate Model)(This Is An Effective Visual Demonstration Device For Showing The Natural Normal Distribution Curve And Illustrating A Graphic Picture Of The Law Of Probability. Marbles Should Be Inserted Through The Hopper To A Preset But Adjustable Position To Produce The Normal Distribution Curve. This Unit Is Ideal Both For Demonstration In Statistics Classes As Well As For Those Experiments Requiriag Assessments Of Normal Probability Phenomena By The Subject. Instruction Manual Is Also Available.) , Teaching Aptitude Scale By Sanjay’ Vohra (English):(This Test Has Ll9 Items. It Measures Aptitude In Eight Areas: Communication, Intelligence,Maturity, Perceptiveness, Persistence, Receptiveness, Social Warmth And Teaching Interest. This Test Is For Teachers And Takes 40 Min To Complete. A) Reusable Booklets (Pkt. Of 25) B) Answer Sheets (Pkt. Of 100)C) Profile Sheets (Pkt. Of 100) D)Scoring Key E) Manual , Duncans Sales Aptitude Test (Indian Adaptation) By Sanjay Vohra (English):(This Test Has Been Designed To Help In Appraising Sales Ability, Potential In Selecting Sales Personel. If Provides An Objective Measure Of One Important Aspect Of Sales Aptitude, Namely Knowledge And Understanding Of Basic Principles Of Selling. This Test Is For 18 Years And Above. 20 Min To Complete. A) Test Booklets (Pfit. Of 25) B) Answer Sheet (Pkt. Of 100) C) Scoring Key D) Manual) , Machanical Aptitude Tests Battery (Matb) By Atmananda Sharma (Hindi/English):(Time 25 Min. Age 13 To 17 Years, Class Viii Io Xii. Test-L: Mechanical Knowledge Measures ‘Knowledge Of Tools Of Children. Non-Verbal And Culture Free. Directions And Examples.Test-Ii: Mechanical Comprehension Measure Factor ‘M’ Of Children. Non-Verbal And Culture Free. Test-Ill: Space Relations- Measures Factors ‘S’ Spatial Visualisation Of Children. Non Verbal And Culture-Free. Test-Iv: Form Relations-Measures Factor ‘P, Perceptual Ability And Inductive Reasoning Of Children. Test-V: Mechanical Adaptability-Measures Background In The Field Of Science, Scientific Applications And Related Activities Of Children) , Multi Factor Interest Questionnaire By Kapoor & Singh (English )(It Provide Scores On Eight Factors- Business, Clerical, Agricultural, Mechanical, Scientific, Outdoor Activities, Aesthesties And Social Meant For 11 To 18 Years.) , Vocational Interest Record By S.P. Kulshrestha (English)(The Present Record Contains 200 Vocations Belonging To Ten Different Vocational Interest Areas - 1. Literary, 2. Scientific, 3. Executive, 4. Commercial, S. Constructive, 6. Artistic, 7. Agriculture, 8.Persuasive, 9. Social, 10. Household. This Test Is Suitable For Delta And Higher Secondary Students, As Well As For The Students Of Colleges And Also For Soung Adults Out Of Schools And Colleges. (A}Test Booklets (A Pit. Of 100) (B)Manual , Educational Interestrecord By S.P. Kulshrestha (English):(The Present Record Contains 98 Edcational Subject/Activities Belonging To Seven Different Education Al Interest Areas. They Are -1. Agriculture, 2. Commerce, 3. Fine Arts, 4. Home Science, S. Humanities,6. Science, 7. Technology.(A)Test Booklets (A Pkt. Of 100) (B)Manuai , Student Teacher Value Inventory By Meenakshi Biswal (English)((A)Test Booklets (A Pkt. Of 100)(B)Manual) , Adjustment Inventory By Nilima Deka (English):((A)Test Booklets (A Pkt. Of 100} Manual) , Bells Adjustment Inventory By Huge M. Bell (English):((A)Tesl Booklets (A Pkl. Of 100) (B)Manual (C}Scoring Key) , Marital Adjustment Questionnaire By P. Kumar & Kanchana Rohtagi (English):(This Is Having 27 Items In Yes Or No Type Scale, And Reliability And Validity Indices Have Been Worked Out. Percentile Norms Are Given. Age Ranging From 28 To 45 Years. (Test Booklets (A Pkt. Of 100) (B)Manual) , Test Of Democratic Values By Alok Gardia (English):(A Reliable & Valid Test Of Democratic Values Which Contains 40 Multiple Choice Items. The Test Measures Six Democratic Values Namely Dignity Of Individual, Liberty, Equality’, Justice. Cooperation & Tolerance. It Can Be Administered On Upper Primary To Higher Secondary Students.The Test Is Also Suitable For Prospective Teachers (B.Ed. Students) And Teachers Of Different Schools. It Can Also Be Administered On Students Of Higher Education. (A)Test Booklets (A Pkt. Of 100) (B Manual) , Personal Adjustment Inventory For Creative Children By C.B. Asaha English):((A)Test Booklets (A Pkt. Of 100) (B)Manual) , A Test For Measuring Decision Making Capacity Of Educational Administrators By A.K.Pandey (English): ((A)Test Booklets (A Pkt. Of 100)(B)Manual) , Prosocial Behaviour Scale By Mahejabin& P.C. Shukla: (New)(This Tool Based On Likert Scale. The Scale Comprises 36 Items, On The Basis Of Six Dimensions. It Can Be Administered On The Secondary And Higher Secondary School Students. Split-Half Reliability Of The Testis 0.77 And Cronbach Alpha Is 0.794. This Test Measures The Level Of Prosociality, Which Indicates High Academic Achievement, Well Adjustment, Healthy Teacher-Taught Relationship And Social Harmony. Therefore, This Test Is Very Helpful To Develop Healthy Adjustment Skill, To Develop Healthy Reiationsbips& Social Harmony. This Tool Can Also Be Used As An Indicator Of Academic Achievement & Healthy Personality.A) Test Booklets (A Pkt. Of 100) B) Manual , Verbal Test Of Intelligence By M. Asthana And K.B. Verma (English):(This Test Covers Eight Areas Of General Mental Ability, Viz, Best Answer, Reasoning, Similar, Opposite, Analogy’, Mathematical Series, Mathematical Instruction And Classification.Norms Have Been Prepared Age-Wise. Age 13 To 21 Years. Time 20 Min No. Of Item100. (A)Resuable Test Booklets (A Pkt. Of 20) (B)Answer Sheets (A Pkt. Of 100) (C)Manual (D)Scoring Key(Stenciltype) , Group Test Of General Mental Ability By S. Jalota (English):(It Is A Point Scale Of General Ability For College-Educated Adults. (A)Resuable Test Booklets (A Pkt. Of 20) (B)Answer Sheet (A Pftt. Of 100)(C)Manual (D)Scoring Key) , The Southend Test Of Intelligence (English)((A)Test Booklets (A Pkt. Of 100) (B)Manual (C)Practice Sheets (A Pkt. Of 100) , On-Verbal Intelligence Test By Atmanand Sharma:(It Measures ‘G’ Of Children Age 11 To 16 Years, Grades Vi To X. Ii Is Culture-Free. Working Time 25 Min. (A)Tesl Booklets (A Pkt. Of 10) , Emotional Intelligence Test (For Adolescents) By Meena Jain & Madhu Jain:((A)Booklets (A Pkt. Of 100) (B)Manual) , Emotional Intelligence Test By Rakesh Pandey(Age Group 18 To 35 Years. The Scale Is Based On The Most Widely Used And Scientifically Validated Ability Model Of Emotional Intelligence Proposed By Mayer And Salovey. It Is A 51-Items Self Report Measure That Provides A Quick Assessment Of The Your Dimensions Of Emotional Intelligence, (A) Perception, Appraisal And Expression Of Emotion, (B) Emotional Facilitation Of Thinking, (C) Understanding And Analyzing Emotions, Employing Emotional Knowledge, (D) Reflective Regulation Of Emotion To Prompt Emotional And Intellectual Growth. The Scale Has Been Validated On A Wide Range Of Population And May Be Administered To Any Age Group Capable Of Comprehending Verbal Expressions. The Authors Have Tried This Scale On Adolescents And Adults Also And Found It Reliable And Valid. The Scale Can Be Used In Clinical Setting As Well As In The Area Of Health Psychology, Educational Psychology’ And Other Areas Of Psychological Investigations That Focus On The Role Of The Ability To Understand, Manage And Utilize Emotions For Personal Growth And Well Being. (A)Test Booklets (A Pkt. Of 100) (Bjmanual) , Emotional Intelligence Scale By Udham Singh &K.Ozha (English): (Age Group 15 To 30 Years. No. Of Item 46. Dimension Measure In This Test Are - Knowing And Managing Our Emotions, Motivatiting Our Self, Knowing Others Emotions, Handling Relationship With Others.A)Test Booklets Qa Pkt. Of 100) (B)Manual) , Social Intelligence Test By S.Mathur (English):(No. Of Item 50. Age Range 14 To 50 Years. A) Test Booklets (A Pkt. Of 100) B) Manual C)Scoring Key) , Culture Fair (Free) Intelligence Scale Indian Print By Kapoor, Rao & Singh/Cattell And Cattell (Indian Adaptation):(Minimise Cultural Bias. These May Be Administered Individually Or In A Group. They May Be Used To Identify Learning Problems Of Individuals And Assess Applicants Potential To Perform Job Relevant Tasks. (A)Scale I (English) (Cfis-I): For 4 To 8 Years And Older Retardates. Time - 25 Min. Norms Mental Age And L.Q. (B)Scaie Ii(English/Hindi) (Cfis-Ii E): For 8 To 14 Years And Average L.Q. Adults. Lt Contains Four Sub Tests Involving Different Perceptual Tasks.Completing Series,Classifying, Solving Matries And Evalua Ting Conditions.Time Taken 15 Min. (C) Scale Iii (English/Hindi) (Cfis-Iii E): For 14 Years And Above, I.E., Senior Secondary, College And High I.Q. Adults. By Employing Four Distinct Tasks, The Composite Intelligence Measure Avoids Reliance On A Single Skill. The Scale Is Recommended When Testing Better Educated Or More Intelligent Individuals, Because Of The Higher Difficulties Level Of Items And A Greater Refinement In The Higher Intelligence Ranges.) , Bhatia Battery Performance Test Of Lntelligence By C.M. Bhatia(Age Ii To 16 Years.) , Alexanders Pass Along Test:(Age L0+ Years Complete Set With Duco Painted Material And Design Cards Contained In A Wooden Or Plastic Box With Record Sheets (Pads Of 50) And Manual.) , Indian Adpatation Of Binet-Simon Scale((1960) By S.P. Kulshrestha) , Cube Construction Test:(Complete Set Witb Duco Painted Material And Models In Wooden Or Plastic Box Witb Record Sheets (Pad Of 50 Each With Manual) , Kohs Block Design Test:(Age 10* Years. Complete Set With Duco Painted Material And 17 Design Cards In Plastic Box With Record Sheets (Pads Of 50 Each) And Manual) , Manikin Test:(Six Pieces Representing Six Major Parts Of The Human Body To Be Fitted Together To Make A Conventionalized Figure Of A Man.) , Dearborn Form Board With Manual:(Contains The Form Board With 12 Designs Of Different Types. Two Wooden Blocks Used As Stimuli Are To Be Placed In Them. Measures Efficiency Skill.) , Pintner-Patterson Five Figures By Rudulf Pintner And Patterson:(With Manual. Contains Eleven Wooden Blocks And Five Figures. The Blocks Are To Be Fitted In Figures. May Be Used To Measure Quick Performance And Learning.) , Pintner-Patterson Short Scale Of Performance Test:(By Rudolf Pintner & Patterson: This Scale Comprises 10 Sub-Tests And Is Useful For Retesting Or Such Other Purposes. Complete With Materials For All 10 Sub-Tests.) , Hanfmann-Kasanin Concept Formation Test:(Consists Of 22 Properly Coloured Wooden Blocks. The Blocks Consist Of 5 Different Colours, 2 Different Heights And Sizes And Six Different Shades. Supplied Witb A Box.) , Reasoning Ability Test (Rat—D)(By L.N. Dube}’ (Englisb): This Test Consists 60 Items. For 12 To 17 Years Students Of Either Sex.) , Rais Concept Formation Test By G.C. Rai (College/Adult Form):(By L.N. Dube}’ (Englisb): This Test Consists 60 Items. For 12 To 17 Years Students Of Either Sex.) , Scientific Thinking Style Questionnaire By P.N. Singh & Ranjana Arora (Hindi/English}(No. Of Item 30. In The Preparation Of The Present Scale All The Six Components, Viz., Amoral, Creative, Developmental, Parsimonious, Testable And Unified Of The Nature Of Scientific Knowledge Have Been Used. Data Collection On The Graduate 1Evel.) , Interview Schedule For Measuring Achievement Oriented Child Rearing Practice By Manju Mehta (English)(: Four Items Related To Each Of The Following Orientation Were Prepared. Activistic-Passivistic-Orientation, Present-Future Orientation, Individualistic-Feministic Orientation. Various Achievement And Independence-Related Demands Were Found To Be Made At Different Age Levels Varying From 2 Years To 15 Years. The Question Used In Second Try Out In The Final Schedule, For Knowing Mothers Standard Of Age For Achievement And Independence Demands. (A)Test Booklets (A Pkt. Of 100) (B)Manual) , Pat Anxiety Scale (As- Ck5) By R.B. Cattbbbell, S.K.Krug&I.H.Scheier (English, Indian Print):(This 40 Item Questionnaire Provides A Convenient And Practical Measure Of Anxiety Level. It Is Constituted On The Basis Of 5 Principal 16 P.F. Factors Namely Emotional Instability, Suspiciousness, Guilt Proneness, Low Integration And Tension. It Is Meant For 16 Years And Adults. Approximate Time 15 Min. Standard Scores For Adult, College And High School Population.) , Guidance Need Inventory (Gni) By Sudha Kumari Sharma & Shahwar Fatima Zaidi (English) (No. Of Items 92. Dimensions-Educational, Vocational, Personal, Social, Emotional. (A)Test Booklets (A Pkt. Of 100) (B)Manual) , Mental Health Checklist By Pramod Kumar (Hindi/English):(This Check List Consists Of 11 Items. It Measures Mental Health Of Adult Age Range 18-28 Years. (A)Test Booklets (A Pkt. Of 100) (B)Manual) , Mental Depression Scale By L.N. Dubey (English):(No. Of Items Are 50. The Age Range 12 To 55 Years. (A)Tesl Booklets (A Pkt. Of 100) (B)Manual (E)Scoring Key) , Suicidal Behaviour Questionnaire By Sheweta Shandilya & Alok Gardia( English):(This Test Measures Four Areas Taps Into Lifetime Suicide Ideation And Or Suicide Attempt, The Frequency Of Suicidal Ideation Over The Past 12 Months, Taps Into The Threat Of Suicidal Attempt, Evaluatesself- Reported Likelihood Of Suicidal Behaviour In The Future. Age Group School And College Students. (A) Test Booklet (A Pit. Of 100)B Manual) , Case Study Test By L.N. Dubey (Hindi/English):((A)Test Booklets (A Pkt. Of 100)(B)Manual) , Medico Psychological Questionnaire By J. Bharat Raj (English)(This Questionnaire Consists Of 50 Items. It Measures Hysteria, Neurasthenia, Anxiety Neurosis, Reaction De Pression, And Obsessive- Compulsivetendency Of Normal And Abnormal Person. It Measures Neurotieism In Terms Of Emotional Adjustment And Emotional Maladjustment. It Is Standardized On College Student Of Both The Sex.) , Introversion-Extraversion Test By M.C. Joshi English):((A)Test Booklets (A Pkt. O£ 100) (B)Instruction And Score Cards (1Pair) , Kundu Introversion- Extroversion Test By R.N. Kundu (English):(A) Test Booklets (A Pkt. Of 100) B)Manual , Personal Efficacy Scale By A.P. Sing & Patiraj Kumari (1991, Hindi/English):(No. Of Items Are 19 For Adult. Norms And Relibaility Are Not Available) , Sex Differentiation Scale By A.P. Singh & Patiraj Kumari (1991, English):(No. Of Items Are 19 For Adult. Norms And Relibaility Are Not Available) , Family I Nvolveoient Inventory By A.P. Singh & Pramila Tiwari (2003, English): (No.Of Items Are 24. Norms Are Not Avalible. For Adults.) , Life Satisfaction Scale Bv A.P. Singh & Pramila Tiwari(2003,Engiish):(No Of Items Are12.Foradults.) , 16 P.F. Test S.D. Kapoor (Hindi/English): Indian Adaplation:(It Has 16 Primary Scales And Other Numerous Derivative Scales. A Test Of Normal Adult Personality The 16 P. F, Form A To E Effectively Measure Levels Of (I) Warmth, (Ii) Intelligence, (Iii) Emotional Maturity, (Iv) Dominance, (V) Impulsivity, (*I) Super Ego Strength, (Vii) Boldness, (Viii) Sensitivity, (Ix) Trust, (X) Imagination, (Xi) Shrewdness, (Xii) Confidence, (Xiii) Radica Alism, (Xiv) Self-Sufficiency, (Xv) Self-Sentiment And (Xvi) Tension. Additional Derived Scales Include Five Second Order Factors— Extraversion, Anxiety, Tough Poise, Independent And Social Control Plus Composite Score For Creativity, Adjustment, Leadership And Numerous Other Criteria Related Scales. Lt Is Widely Used In Industry’And Business For Selection, Placement, Training And Promotion Of Personnel. Lt Also Facilitates Accurate Diagnosis And Effective Treatment. Range 16 Years And Above. Forms A And B Are Equiva Lent Forms Of 187 Items, Untimed, Requires 45-60 Min, Forms C And D Are Equivalent Forms Of 105 Items, Meant For 15+ And Adult, Untiined, Requires 25-30 Min Land Form E Of 128 Items, Is For Low Literates. Manual Also Includes Norms Table. Form A/B/C/D/E (Any One) , Childrens Personality Questionnaire By Porter And Cattell (Cpq-Pc) (English, Indian Print):((The Cpq Measures 14 Primary Traits Useful In Understanding And Evaluating The Course Of Personal, Social And Academic Development, Plus Traits Related To Creativity. Traits Measured By Cpq Include Emotional Stability, Self-Concept Level, Excitability And Apprehension, Scores For Extraversion, Anxietyety And Other Broad Trait Patterns Are Also Obtained As Combination Of The Primary Scales. It Is Meant For Age Groups Between 8-12 Years. Each Form Has 140 Items. Time Required Is 30 To 60 Min Per Form. Minimum Reading Level Is 4Th Standard) , High School Peronality Questionnaire By S.D. Kapoor (English):(Form-A Or B. Jr-Sr. Hspq Measures14 Primary Personality Dimensions -(I) Warmth, (Ii) I Ntelligence, (Iii) Emotional Maturity, (Iv) Excitabilty, (V) Assertiveness, (Vi) Enthusiastic,(Vii) Su Per Ego Strength, (Viii) Venturesome, (Ix) Dependent, (X) Individualistic (Xi) Depressive, (Zii) Self Sufficient, (Xiii) Controlled, (Xiv) Tense. It Contains T42 Iteras Ia Each Form And Is Meant For Age 12-18 Years. Time Required Is 40 Min. (A)Test Booklets (A Pkt. Of 20) (B)Test Profile (A Pkt. Of 100) (C)Manual (D)Answer Sheets (A Pkl. Of 100) (E)Scoring Key) , Adolescent Problems Scale By H.D. Badami (English}(: The Present Problem Inventory Is College Level And Post-Graduate Level. No. Of Items 265. In This Test 9 Areas Measuring- 1. Physical Health And Fitness, 2. Self And Self-Image, 3.Economic And Mate Rial Facilities, 4. Friendship, Sex And Marriage, 5.Family, 6. Social, 7. Educational, 8. Vocational, 9. Custom, Morality & Religion. (A)Test Booklets (A Pkt. Of 100) (B)Manual) , Sex-Role Inventory By Madhu Asthana And O.P. Chaudhary (Hindi/English (No. Of Items Are 60. (A)Manual (B)Test Booklets (A Pkt. Of 100) (C)Scoring Key) , Eysenck Personality Inventory By H.J. Eysenck And Sybil B.G. Eysenck (English} (: (A)Test Booklets (A Pkt. Of 100)(B)Manual) , Eysenck Personality Inventory (Epi) By G.P. Thakur (English):(No. Of Items Are 57. (A)Test Booklets (A Pki. Of 100) (B)Manual (C)Scoring Key) , Temperament Scale (For Chidlren) By J.D. Murjani (Hindi/English):)(For Age Group 8 14 Years. No. Of Items 30. Ten Dimensions Are Measuring Sociability, Tolerance, Aggressiveness, Warmth,Responsibility, Impulsivity, Cheerfulness, Vigorous, Co- Operativeness, Persistence. (A)Test Booklets (A Pit. Of 100) (B)Manual) , The Inferiority Questionnaire By G.C. Pati (English)(It Is A 20 Item Test.Validity Coefficient Against ’Self-Rating’ Is 0.717 And Reliability (Test-Retest) Is 0.920. Scheme For Qualitative Interpretation Of Scores Provided. (A)Test Sheets (A Pkt. Of 100) (B}Manual) , Coping Strategies Test (2001) By A.K. Srivastava (Hindi/English):(Age Group 11 To 18 Years. No. Of Item Are 50. Five Major Categories Measure - Behavioural-Approach, Cognitive-Apprroach, Cognitive- Behavioural Approach, Behavioural- Avoidance,Cognitive Avoidance. (A)Test Booklets (A Pkt. Of 100)(B)Manuai) , Aggression Questionnaire By G.C. Pati (Hindi/English):(It Is Composed Of 16 Multiple Alternative Type Of Answer. Its Ratio Is 0.71 And Validity Against External Criterion Is 0.828. Scheme For Qualitative Interpretali On Of Scores Is Provided. The Questionnaire Consists Of 16 Questions. (A)Test Booklets (A Pkt. Of 100} (B)Manual) , The Dependence Proneness Scale By Jai B.P. Sinha (Hindi/Englisb):(There Are Four Areas - Affection- Affiliation, Lack Of Internal Control, Evading Responsibility And Conformity; To Be Rated On A 5 Point Likert Scale. Its Reliability Coefficient Is .94. Individual Administration Is Advised. Validity Has Been Established Against Many Experimental Situations. (A)Test Booklets (A Pkt. Of 100) (B)Manual) , Self-Esteem Questionnaire By Minakshi Biswal (English)(No. Of Items 50. Age Group 15-25 Years. It Can Be Used For Any Behavioural Research Concerning Self Esteem, Survey Purpose/For Comparison Of Population. It Gives A Quick Measure Of Self-Esteem For Experimental Purposes. It Is Suitable For Group Administration As Well As For Individual Testing. The Test Is Developed And Standardized On An Indian Sample. (A) Test Booklets (A Pkl. Of 100 B) Manual) (1 Pair) (D)Manual) , The Self-Confidence (S-C) Scale By M. Basavanna (English):(It Is A 100 Item Scale In T & F Type. It Is Designed To Estimate The Level Of Self-Confidence Among Adolescents And Adults. Corrected Split-Half Reliability Is 0.94. Validity In The Form Of Item Validity And Against Other Experimental Indices Is Established. The Test Booktlet Is Reusable. (A)Test Booklets (A Pkt. Of 20) (B)Answer Sheets (A Pkt. Of 100) (C)Scoring Key (1 Pair) (D)Manual) , Self-Esteem For Children By Anand Kumar (English):(A Set For Children Contains 50 Items And The Following 4 Subscales: 1.General Self-Esteem, 2. Social Self- Esteem, 3. Academic Self-Esteem, 4. Parental Self-Es Teem. Age Group 8 To 15 Years. (A)Test Booklets (A Pkt. Of 100) (B)Manual) , Self-Concept Inventory (Adults) By Beena Shah (English):(No. Of Items Are 64. Age Group 21 To 50 Years. 10 Dimensions Measured In This Test Are - 1. Social Self Concept, 2. Emotional Self-Concept, 3. Physical Self-Concept, 4. Cognitive Self-Concept, 5. Aesthetic Self-Concept, 6.Political Self-Concept, 7. Job Related Self-Concept, 8. Self-Coafideoce, 9. Beliefs And Traditions, 10. Personality Traits. (A)Test Booklets (A Pkt. Of 100) (B)Manual) , Personality Assessment Ranking Method By N.K.Jain (English)((A}Ranking Sheets (A Pkt. Of 100)(B)Manuai) , Multi-Dimensional Assessment Of Personality Scale (Map Series) By Sanjay Vohra:(Map Is A Series Of Tests Ranging From Children Of Primary Level To Normal Adult Personality. Lt Is Used To Analyze/Report Individual Differences In Personality. The Map Series Has Four Forms For Different Levels (Map Form A, T, C And P) , Sentence Completion Test By L.N. Dubey & Archana Dubey (English):(This Test Consists Of 50 Items. It Maeasures Certain Personality Traits — Sociability, Self Confidence And Ambitions. All The Sentences Are So Framed That They Lead To Reveal The Positive Or Negative Aspects Related To Ones Trait. Age Range 14 To 19 Years. (A)Test Booklets (A Pkt. Of 100)(B)Manual0 , Draw-A-Man Test By Pramila Pathak (Age 2.5 To 16 Years.( , Thematic Apperception Test With Manual By H.A. Murray (Original)(Age 14+ Years): , Indian Adpatation Of Children Apperception Test With Manual:((Cat) By Uma Choudhary. Age 4 To 10 Year.) , Indian Adpatation Of Thematic Apperception Test With Manual (Tat) By Uma Choudhary(: Age 15+ No. Of Cards 14 With One Blank:) , Children Apperception Test By Bellack & Bellack (Original) (Cat):(The Cat Consists Of Ten Pictures Depicting Animals In Various Situations. It Is Used With Children Of Both The Sexes Primarily Between The Ages Of 3 To 10 For Maximal Usefulness. It Is Designed To Facilitate Understanding Of A Childs Relationship To His Most Important Figures And Drives. A) Animal Figure B) Human Figure C) Supplementary) , Rorschach Inkblot Test:(With Psychodiagnostic Plates, Record Blank, Location Chart And Manual By Herman Rorschach.) , Indian Adpatation Of Rosenzweig Picture Frustraction Test (Children) By Udai Pareek:(English)(: For Age Group 4 To 13. (A)Test Booklets (A Pkt. Of 20) (B)Record Sheets (A Pkt. Of 50) (C)Manual) , Peer Pressure Scale By Kusum Tyagi & Nidhi Gupta (English)(: Age Group 12 19 Year. No. Of Items 50. This Test Measures 5 Areas - 1. Interpersonal Relationsbip, 2. Agreeableness, 3. Economic Pressure,4. Academic/Scholastic And 5. Consientioun Sess. (A)Test Booklets (A Pitt. Of 100) (B)Manual) , Tweezer Type Dexterity Test:(Teak Wood Base With Rust Proof Metal Square Top Witb 100 Holes. 100 Needles Provided With A Fine Tweezer.) , Manual Dexterity Test:(Plywood Made With Sockets And 60 Pegs. Painted Or Polished And Fine Finish.) , Finger Dexterity Test :(Box Type.) , Threading Test:(The Device Is Employed In Testing The Speed And Dexterity In Finger Movement. The Time Required To Pass A Thread Through An Eye’ Of 33 Rods, Three In A Row And 11 Rows, Is Measured. The Quality Of Performance Can Also Be Checked Easily.) , Complete Minnesota Dexterity Test:(This Test Measures Simple Hand-Eye Coordination And Gross Motor Skills. It Consists Of A Battery Of Five Tests: Placing, Turning, Displacing, One- Hand Turning And Placing, And Two- Hand Turning And Placing. This Test Comes Complete With Two Folding Pegboards, 60 Blocks.) , Whipples Tapping Board: (This Apparatus Demonstrates One Of The Most Elementary Psychomotor Skills. The Task Is Simply To Tap The Stainless Steel Plates As Rapidly As Possible. Designed For Versatility And Durability, This Unit May Be Used To Demonstrate A Number Of Important Principles) , Hand Coordination Test (Electrically Operated):(Used For Teaming Experiments Of Two Hand Coordination, Consists Of Mechanical Device Permitting Horizontal And Vertical Movements Of A Pin Or A Pencil Through Slot Ted Design. Time And Errors Are Counted. Using Impulse Counter Cumulative Record Of Errors Can Be Assessed. 389. Minnesota Rate Of Placin) , Eye Hand Co-Ordination Test (Drever & Collins Model):(A Semi-Circular Hand Plywood Is Covered On One Side By An Iron Sheet. A Scale Is Mounted On Which The Rider Is Moved On Both The Sides Except The Blind Zones. The Subject Sits With His Chin Resting On Chin Stand. Fine Finish With Pointer And The Rider.) , Speed And Accuracy Test (English):((A)Numerical Sheets (A Pad Of 100)(B)Alphabetical Sheets (A Pad Of 100) (E)Manual) , Social Maturity Scale By J. Bharatraj (English):(For Age Level From 0 To 15 Years. A) Test Booklets (A Pkt. Of 100) B)Manual) , Social Cognition By N.K.Jain (English):((A)Stimulus Material (A Pkt. Of 100)(B)Scoring Template (A Pkt. Of 100) (C)Manual) , Environmental Awareness Questionnaire By Sunita Singh (Hindi/English)(:For Secondary Level To P.G. Level. The Questionnaire Contains 32 Items From Different Areas Related To Measuring Of Environment, Case And Effect Of Pollution And Prevention. It Has High Reliability (0.87). The Validity Has Been Ensured Through Experts Opinion. Percentage Score Norms Have Been Provided. (A) Test Booklets , Inter Personal Attraction By Ripunjay Deo Singh & Vikas Kumar (Hindi/English):(No. Of Items Are 34. Dimension/Factors Are 1. Interactional Factors, 2. Personal Factors, 3. Personality Factors, 4. Physical Factors, 5. Situdational) , Rumour Analysis By N.K.Jain (English)((A)Stimuius Material (A Pkt. Of 100) (B)Scoring Template (A Pkt. Of 100) (C)Manual) , Sociometric Choice Test By Meera Joshi & Jagdish Pandey (English):(This Test Records Interpersonal Attractions Among The Members Of A Group. The Test Should Be Used With A Group Of Persons Who Have Been Together Long Enough To Be Acquainted With One Aaother, Such As In A Class, In A Factory, Club, Etc. Each Individual Is Asked To Choose Five Group Members With Whom He Would Like Most And Also Dislike Most To Study, Play, Sit Or Work, Lunch And Walk. The Names Are To Be Written According To Their Choice Positions. The Choices May Be Interpreted Either In Manner Of A Sociogram Or On The Basis Of Ratings On The Preference Scale Continuum. (A)Test Booklets (A Pkt. Of 100) , Impression Formation By Photographs By Meera Joshi & J. Pandey (Hindi/English):((A)Cards (B)Answer Sheets (A Pkt. Of 100) (C)Manuai) , Aids Awareness Questionnaire By Madhu Asthana (Hindi/English):Lthy Personality. A) Test Booklets (A Pkt. Of 100) B) Manual((A)Manual (B)Test Booklets (A Pkt. Of 100)) , Indian Adaptation Of Hutts Bender Gestalt Test For Adults By C.B. Dwivedi &Subhara Banerjee:(This Adaptation Provides Scoring Instructions For 17 Pathological And For The Adienceabience Scale. It Is Highly Useful For A Quick Understanding And Screening Of Psychopathological Cases. Normative Data Have Been Provided For The Mentioned 17 Pathological And Adolescent-Abience Scale Separately. (A)Manual (B)Test Cards (Per Set) (E)Lndividuai Response Sheet (A Piit. Of 100) (D)Test Booklets (A Pkt. Of 100) , Occupational Role Stress Inventory By Udai Pareek (English):((A)Test Booklets (A Pitt. Of 100)(B)Manuai) , Job Anxiety Scale By M.M. Sinha And A.K. Srivastava (English):(The Scale Comprises 80 Items Which Reveals Employees Anxiety Being Manifested In The Context Of Following Seven Components Of The Job (1) Security- Job Security And Safety, (2) Recognition, (3) Human Relations At Work, (4) Reward And Punishment, (5) Self-Esteem, State Punishment, (6) Self-Esteem, Self-Image, (7) Future Prospects, (8) Capacity To Work. The Scale May Be Administered To The Employees Operating In Production As Well As Non Production Organisations. The Scale May Be Conveniently Used For Research, Survey And Diagnostic Purposes. Split-Half Reliability Is 0.92, And Test-Retest Reliability Is 0.94. The Test Was Validated Against Sinha Anxiety Scale (R-0.54), Sarasons General Anaiety Scale (R-0.56), Taylors Manifest Anxiety Scale (R 0.48). (A)Test Booklets (A Pkt. Of 100) (B)Manual ) , Creative Behaviour Questionnaire By A.P. Singh & L.K. Mishra (2009, English)(No. Of Items Are 13 For Manager) , Intrinsic Work Motivation Questionnaire By A.P. Sngh& L.K. Mishra (2009, English):(No. Of Items Are 12. For Employee.) , Audio Visual Aids Chart Types Of Modern Indian Education . Models Of Teaching History And Development Of Indian Education School Of Psychology Theories Of Personality Theories Of Intelligence Theories Of Learning Major Schools Of Philosophy Schools Of Indian Philosophy Physiological Charts: A Set Of 7 - Eve, Ear, Brain, Skeleton, Nervous System, Human Body, Blood Circulation) , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) David Weehsler , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) H.I Eysenck, , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Kuri Lewin , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Alfred Binet , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Wilhelm Wundt , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Gordon Allpor , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) B.F. Skinner , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Sigmund Freud , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Edward L.Throndihe , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Ivan P. Paxlov , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Jean Piaget, , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Wolfiang Kohler , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Edwin Guthrie , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Carl Gustav’ Jung , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Raymond Bernard Catteii , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) John B. Watson , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Herman Rorschach , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Carl Rogers , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Hermann Ebbinghaus , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Abraham Maslow , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Aristotle , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Erin H. Erikson , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Rollo May , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Albert Bandura , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Lewis Terman , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Henry Murray , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Roberi Pluichik , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Alfred Adler , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Hefimann Von Helinholtze , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) William James , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) John Dewey , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Herbert Spencer , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) John Friedrich Herbart , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Jean Jacques Rousseau , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Johann Heinrich Pestolozzi , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Friedrich Frobel , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Max Wertheimer , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Rene Descartes , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Plato , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Socrates , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Maria Montessori , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) B.Russell , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Francis Galton , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) William Mcdougall , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Edward C. Tolman , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Louis Leon Thurstone , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) William Heard Kilpatrick , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Gastav Theodor Fechner , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Ernst H. Weber , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Charles Robert Darwin , Photographs Of Eminent Foreign Psychologists/Educationists (Coloured Size 11 X 17) Jerome Seymour Bruner , Blind Goggles , Metronome:With Bell (Imported)
Contract Date: Jun 27, 2026 Contract Value : 4.95 Lakh
Local Bodies No of Bidders 5
13.
Public Administrative Department #11355718 AOC
Tender for Annual Tender 2026-27 Supply Of Electrical Goods For The Year 2026-27 , 4 Feet Flourescent Tube Light , 36W / 40W Tubelight Electronic Choke , Tube Light Side Lock Holder , Insluation Gum Tape Roll - Isi , 1/18 Vir Copper Wire [1/44] [90Mtr] , 3/20 Cts Copper Wire [3/36] [90Mtr] , 7/20 Cts Copper Wire [7/34] [90Mtr] , 7/16 Cts Copper Wire [7/67] [90Mtr] , 19/16 Cts Copper Wire [19/51] [90Mtr] , 1.5 Sq.Mm 3 Core Copper Cable , 2.5 Sq.Mm 3 Core Copper Cable , 4 Sq.Mm 3 Core Copper Cable , 6 Sq.Mm 3 Core Copper Cable , 10 Sq.Mm 3 Core Copper Cable , 16 Sq.Mm 3 Core Copper Cable , Led Fitting Top Protection Glass - Street Light , Led Fitting Top Protection Glass - Flood Light , 32 / 40 Mm 1 No Gi Bend Pipe, With 2Nos Of Pole Clamps With Bolts And Nuts , 6Amps To 32 Amps Sp Mcb , 40Amps 2Pole Isolator , 63Amps 4Pole Isolator , 32A D.P Switch , Mcb Box , Fuse Unit 16 Amps 240V , Fuse Unit 32 Amps 415V , Fuse Unit 63 Amps 415V , Fuse Unit 100 Amps 415V (Heavy Duty) , Fuse Unit 200 Amps 415V (Heavy Duty) , Fuse Unit 300 Amps 415V (Heavy Duty) , Fuse Unit 400 Amps 415V (Heavy Duty) , Fuse Unit 500 Amps 415V (Heavy Duty) , Main Switches Spn 32 Amps , Main Switches Tpn 32 Amps , Main Switches Tpn 63 Amps , Main Switches Tpn 100 Amps , Main Switches Tpn 315 Amps , 63A 4Pmc Changeover Switch , 100A 4Pmc Changeover Switch , Automatic On/Off Street Light Timer Switch With 24Hrs 7 Days Programable Digital Timer Clock, 40 Amps 4 Pole Contactor With Coil, Mcb Switch And Connector Fully Wired With All Accessories , Street Light Meter/Main Box With Wooden Board, Main Switch, Fuse Carrier Fully Wired With All Accessories , Electronic 7 Days 24 Hrs Programable Ditial Timer Clock , 63 Amps 4 Pole Contact With Coil , 220V - 250V Contactor Coil , Power Capacitor , 9W Led Bulb , 20W High Bright Led 4 Feet Light , 20W Led Power Saver Street Light Fitting , 25W Led Power Saver Street Light Fitting , 30W Led Power Saver Street Light Fitting , 36W Led Power Saver Street Light Fitting , 50W Led Power Saver Street Light Fitting , 60W Led Power Saver Street Light Fitting , 72W Led Power Saver Street Light Fitting , 90W Led Power Saver Street Light Fitting , 150W Led Power Saver Flood Light Fittings , 200W Led Power Saver Flood Light Fittings , 60W All-In-One Solar Led Street Light Fittings , 80W All-In-One Solar Led Street Light Fittings , 18W To 25W Led Chip Board , 30W To 36W Led Chip Board , 45W To 60W Led Chip Board , 72W To 90W Led Chip Board , 120W To 200W Led Chip Board , 18W To 25W Led Heavy Duty Electronic Driver , 30W To 36W Led Heavy Duty Electronic Driver , 45W To 60W Led Heavy Duty Electronic Driver , 72W To 90W Led Heavy Duty Electronic Driver , 120W To 200W Led Heavy Duty Electronic Driver , 10 Kv Surge Protector , 48 Ceiling Fan With All Accessories , D.O.L Motor Starter Up-To 10 Hp , G.I Swaged Tubler 6 Meter Pole With 60W All-In-One Solar Street Light Model Fitting With One Year Warranty, [All-In-One Model Includes 100W Solar Panel, 60W Led Mcpcb, In-Built Li-Thium Battery, Dusk To Dawn Driver Controller, Sensor, Heavy Duty Clamping Arm In A Suitable Ip65 Rated Enclosure] , 10Metre Hot Dip Galvanised Octogonal Pole With Round Ring Arm And 4Nos Of Strong 5Feet Anchor Bolts, Templates, And Nuts Etc.. Complete Set , 1 Hp To 3Hp Single Phase Control Panel With Contactor, Relay, Auto-Start Preventor, Volt Meter, Amps Meter, Etc.. Complete In A Suitable Powder Coated Enclosure. , 5 Hp To 7.5Hp Three Phase Fasd - Auto-Start / Dry Run Protection Control Panel With Contactor, Relay, Auto-Start Preventor, Volt Meter, Amps Meter, Etc.. Complete In A Suitable Powder Coated Enclosure. , 10 Hp To 25Hp Three Phase Fasd - Auto-Start / Dry Run Protection Control Panel With Contactor, Relay, Auto-Start Preventor, Volt Meter, Amps Meter, Etc.. Complete In A Suitable Powder Coated Enclosure. , Service Charges Automatic On/Off Street Light Timer Switch Box , Service Charges For Mini Mast Lighting System , Service Charges For High Mast Lighting System
Contract Date: Jun 24, 2026 Contract Value : 3.87 Lakh
Local Bodies No of Bidders 2
Contract Date: Jun 30, 2026 Contract Value : 81,689
Local Bodies No of Bidders 2
15.
Coal and Mines #11337639 AOC
Bids Are invited for Custom Bid For Services - Electrical Works For Maintenance Of Quarters And Manoranjan Kendra Of Urjagram Colony, Wani Area Under Mission Sehat - Point Wiring For Light/Bell/Exhaust Fan In Pvc Trunking (Casing-Capping) With 1.5 Sq.Mm (2+1E) Frlsh Grade Copper Wire, Modular Type Switch, Earthing And Required Accessories As Per Specification No. Wg-Pw/Sw (Materia + Labour) , Point Wiring For Independent Plug In Pvc Trunking (Casing-Capping) With 1.5 Sq.Mm (2+1E) Frlsh Grade Copper Wire, Modular Type Switch, Earthing And Required Accessories As Per Specification No. Wg-Pw/Sw (Materia + Labour) , Point Wiring For Light/Bell Concealed Type In Min 20 Mm Hms Pvc Conduit With 1.5 Sq.Mm. (2+1E) Frlsh Grade Copper Wires, Modular Type Switch, Earthing And Required Accessories As Per Specification No. Wg-Pw/Cw (Materia + Labour) , Point Wiring For Independent Plug, Concealed Type In Min 20 Mm Hms Pvc Conduit With 1.5 Sq.Mm (2+1E) Frlsh Grade Copper Wires, Modular Type Switch And Socket, Earthing And Required Accessories As Per Specification No Wgpw/ Sw (Materia + Labour) , Supplying Modular Type Switch 6A/10A On Provided Plate And Box With Wiring Connections Complete. ( Materia Only) , Supplying Modular Type Switch 16A On Provided Plate And Box With Wiring Connections Complete. (Materia Only) , Supplying Modular Type Bell-Push 6A/10A On Provided Plate And Box With Wiring Connections Complete. (Materia Only) , Supplying Modular Type 3 Pin 6A Multi Socketwith Safety Shutter On Provided Plate And Box With Wiring Connections Complete. (Materia Only) , Supplying Modular Type 3 Pin 6/16A Multi Socket With Safety Shutter On Provided Plate And Box With Wiring Connections Complete. (Materia Only) , Supplying 6A 3 Pin Plug Top Bakelite Type Of 230V A.C. Supply. (Materia Only) , Supplying 16A 3 Pin Plug Top Bakelite Type Of 230V A.C. Supply. (Materia Only) , Supplying Flush Type Shockproof Plug Socket 6A & 16A (6 Pin) With 16A Switch Combined With Indicator L And Fuse With Gang Box On Wooden Board. (Materia Only) , Supplying Mains With 2X1.5 Sq.Mm Frlsh Copper Pvc Insulated Wire Laid In Provided Conduit/Trunking/Inside Pole/Bus Bars Or Any Other Places As Per Specification No. Wg-Ma/Bw (Materia Only) , Supplying Mains With 2X2.5 Sq.Mm Frlsh Copper Pvc Insulated Wire Laid In Provided Conduit/Trunking/Inside Pole/Bus Bars Or Any Other Places. As Per Specification No. Wg-Ma/Bw (Materia Only) , Supplying Mains With 2X4 Sq.Mm Frlsh Copper Pvc Insulated Wire Laid In Provided Conduit/Trunking/Inside Pole/Bus Bars Or Any Other Places. As Per Specification No. Wg-Ma/Bw (Materia Only) , Supplying Mains With 2X6 Sq.Mm Frlsh Copper Pvc Insulated Wire Laid In Provided Conduit/Trunking/Inside Pole/Bus Bars Or Any Other Places As Per Specification No. Wg-Ma/Bw (Materia Only) , Supplying Pvc Insulated Pvc Round Sheathed Fr 1.5 Sq.Mm (30 No. X 0.25Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv (Materia Only) , Supplying Pvc Insulated Pvc Round Sheathed Fr 2.5 Sq.Mm (50 No. X 0.25Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv (Materia Only) , Supplying And Erecting Pvc Insulated Pvc Round Sheathed Fr 4 Sq.Mm (56 No. X 0.30Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv (Materia + Labour) , Supplying, Erecting & Terminating Fr Xlpe Insulated, Galvanised Steel Wire Armoured (Round) Cable 1100 V, 2 Core 4 Sq Mm Copper Conductor Complete Erected With Glands & Lugs, On Wall/ Trusses/Pole Or Laid In Provided Trench/ Pipe As Per Specification No. Cb-Lt/Cu (Materia + Labour) , Supplying, Erecting & Terminating Fr Xlpe Insulated, Galvanised Steel Wire Armoured (Round) Cable 1100 V, 2 Core 6 Sq. Mm. Copper Conductor Complete Erected With Glands & Lugs, On Wall/ Trusses/Pole Or Laid In Provided Trench/ Pipe As Per Specification No. Cb-Lt/Cu (Materia + Labour) , Supplying Hms Pvc Conduit 25Mm Dia. With Pvc Accessories On Wall/Ceiling As Per Specification No. Wg-Ma/Con. (Materia Only) , Supplying Pvc Trunking (Pvc Casing-N-Capping) Of Size 20Mm With Accessories On Wall/Ceiling As Per Specification No. Wg-Ma/Con. (Materia Only) , Supplying Pvc Trunking (Pvc Casing-N-Capping) Of Size 25Mm With Accessories On Wall/Ceiling As Per Specification No. Wg-Ma/Con. (Material Only) , Supplying Pvc Box Trunking Of Size 50X50mm With Accessories On Wall/Ceiling As Per Specification No. Wg-Ma/Box. (Material Only) , Supplying Gi Flexible Conduit 25Mm Dia. Conforming To I.S. With Required Number Of Couplings, Bushes, Check Nuts Etc. Complete (Material Only) , Supplying Spmcb 6A To 32A, C-Series With Rated Short-Circuit Breaking Capacity(Icn) 10Ka In Provided Distribution Board As Per Specification No. Sw-Mcb (Material Only) , Supplying Sp Mcb 40A To 63A, C-Series With Rated Short - Circuit Breaking Capacity (Icn) 10Ka In Provided Distribution Board As Per Specification No. Sw-Mcb (Material Only) , Supplying Dp Mcb 40A To 63A, C-Series With Rated Short - Circuit Breaking Capacity (Icn) 10Ka In Provided Distribution Board As Per Specification No. Sw-Mcb (Material Only) , Supplying Fp Mcb 40A To 63A, With Rated Short - Circuit Breaking Capacity (Icn) 10Ka In Provided Distribution Board As Per Specification No. Sw-Mcb (Material Only) , Supplying 4 Pole Isolator Only Switch Version Of Miniature Circuit Breakers Of 80/100A In Provided Distribution Board. (Material Only) , Supplying And Erecting Single Pole And Neutral Distribution Board (Spndb), With 2 Ways For Incoming And 8 Ways (8 Poles) For Outgoing Sp Mcbs, With Door, 1.2Mm Thickness Surface/Flush Mounted, Ip 43 Protection On Provided Iron/Gi Frame As Per Specification No. Sw-Mcbdb (Material + Labour) , Supplying & Erecting Single Pole And Neutral Distribution Board (Spndb), With 2 Ways For Incoming And 10 Ways (10 Poles) For Outgoing Sp Mcbs, With Door, 1.2Mm Thickness Surface/Flush Mounted, Ip 43 Protection Provided On Iron/Gi Frame As Per Specification No. Sw-Mcbdb (Material + Labour) , Providing, Erecting And Commissioning 2 Pole Rccb Only Of Electromagnetic Type With 30/100/300 Ma Sensitivity And Having Capacity Of 40A Complete As Per Specification No. Swrccb/ Rccb (Material Only) , Providing & Erecting 3 Pole Mccb, 415V, Up To 100A, Rated Short-Circuit Breaking Capacity 25 Ka (Ics=100% Of Icu), Adjustable Thermal (Overload) Setting And Fixed Magnetic Setting With Provided Leads, Provision For Installation Of Shunt/Uv/Trip Alarm Contact. Mccb With Phase Barriers On Both Sides, Insulation Withstand Capacity 800V, No Line-Load Bias In Provided Enclosure/Panel As Per Specification No. Sw-Mccb (Material + Labour) , Providing & Erecting 3 Pole Mccb, 415V, 200A, Rated Short-Circuit Breaking Capacity25 Ka (Ics=100% Of Icu), Adjustable Thermal (Overload) Setting And Adjustable Magneticsetting With Provided Leads, Provision For Installation Of Shunt/Uv/Trip Alarm Contact.Mccb Should Have Phase Barriers Both Sides, With Insulation Withstand Capacity 800V, No Line-Load Bias In Provided Enclosure/Panel As Per Specification No. Sw-Mccb (Material + Labour) , Providing & Erecting 3 Pole Mccb 415V, 250A, Rated Short-Circuit Breaking Capacity 36 Ka (Ics=100% Of Icu) Adjustable Thermal Overload) Setting And Adjustable Magnetic Setting With Provided Leads, Provision For Installation Of Shunt/Uv/Trip Alarm Contact. Mccb Should Have Phase Barriers Both Sides, With Insulation Withstand Capacity 800V, No Line-Load Bias In Provided Enclosure/Panel As Per Specification No. Sw-Mccb (Material + Labour) , Providing & Erecting 3 Pole Mccb 415V, 630A, Rated Short-Circuit Breaking Capacity 36 Ka (Ics=100% Of Icu), Adjustable Thermal (Overload) Setting And Adjustable Magnetic Setting With Provided Leads, Provision For Installation Of Shunt/Uv/Trip Alarm Contact. Mccb Should Have Phase Barriers Both Sides, With Insulation Withstand Capacity 800V, No Line-Load Bias In Provided Enclosure/Panel As Per Specification No. Sw-Mccb (Material + Labour) , Supplying & Erecting On Load Change Over Switch 4 Pole, 415V, 200A, Open Execution Having Staggered Termination, Phase Barrier, Shroud Termination And Terminal Cover Along With Auxiliary Contacts And Ready To Upgrade With Fuse Protection Kit, Operational Current Category Ac23a Complying To Is/Iec 60947-3 Part-1/3 As Per Specification No. Sw-Swr/Cos. (Material + Labour) , Supplying, Erecting, Testing & Commisioning Static Energy Meter With 240V 50 Hz. Ac Supply 5 To 30 A, Accuracy Class 1.0 With Backlit Lcd Display, (Measuring And Display Kwh, Kvah,V, I, Pf, Frequency, Kw, Kva, Six Months History Of Energy & Md In Kw & Kva) With Transparent Hinge Type Box Complete Erected On Polished Teak Wood Board Duly Wired With Required Size Of Weatherproof Pvc Wires Duly Tested By Electric Supply Company. , Providing Temporary Illumination Consisting Of White/Colour Series Lights With 8Mm Led Miniature L S Of 2 To 3.4V [1000 Nos] With Cap With Required Switchgears Erected And Dismantled With Rotor Effect As Approved With Scaffolding, Up To Three Days As Per Specification No. Te-Il/Srl (Material + Labour) , Supplying And Erecting Quartz Electronic Time Switch Having 24 Hour Dial To Work On 250 V 50 Cycle Ac Having Built In Rechargeable Nickel Cadmium Batteries To Run The Time Switch On Failure Of Supply Having Switch Contact Rating Upto 16A To Use Independently Or In Conjunction With Contactor. (Material + Labour) , Supplying And Erecting Programmable Digital Almanac Timer Microcontroller Based With Real Time Clock To Operate On Derived Switching On And Switching Off Street Light As Per Daily Sunset And Sunrise Respectively Automatically Having 4 Digit Led Continuous Time Display, Relay Output 230V / 10A With 10 Hrs. Battery Backup And Manual Over Drive Facility Capable To Drive Different Capacity Contactors Timer Erected In Provided M.S. Box. (Material + Labour) , Supplying And Erecting Four Pole Power Contactor 430V, 40A For Time Switch Complete Erected On Provided Wooden Block/ Box, With Necessary Materials. (Material + Labour) , Supplying 12 V/200Ah Tubular Battery With Battery Terminal Wire, Duly Charged Complete With 36 Months Warranty Complete (Material Only) , Supplying, Erecting, Testing & Commisioning Of Required Size Electrolyte Copper Bus Patti Or Bar Tin Plated In Bus Bar Chamber/In Panel Or Any Other Purpose, Suitable For 500 Volt With Require Capacity Having Thermal Conductivity Of 400W Per Meter With Composition Pure Copper 99.9% Current Density 1.8 With Fixing Arrangement (Like Lug Or Bottle Type Lug) To Both The End With High Grade Polyolefin Insulation Sleeve Complete As Per Specification No. Cp-Bb (Material + Labour) , Supplying Ding Dong / Electronic Musical Type Call Bell With Heavy Duty Coil Suitable To Operate On 230V A.C. Supply Erected On Polished Double Wooden Block/Sunmica Block Of Suitable Size (Material Only) , Supplying Electronic Type Cordless Call Bell Erected On T.W. Board Having Portable Bell Push Working On 9V D.C. Battery And (Effective Range Upto 45 Meter) Bell On 250 V A.C. Supply. (Material Only) , Supplying 5W-7W, 230V Integral Type Led L Suitable For B-22/E-27 Base. (Material Only) Fg-Lp , Supplying 10-12W, 230V Integral Type Led L Suitable For B-22/E-27 Base. Fg-Lp , Supplying 18W, 230V Integral Type Led L Suitable For B-22/E-27 Base. Fg-Lp , Supplying & Erecting Integral Post Top Lantern Fixtures (Light House Type) Suitable Upto Led 18 W L Consisting Of Combination Of Spun Aluminium Canopy & Clear Acrylic Top Cover, Cast Aluminium Pole Cap On Provided Pole/ Bracket As Per Specification No. Fg-Odf/Ptl. (Material + Labour) , Supplying Pvc Surface Modular Double Mounting Plate 3 Modules Complete. (Material Only) , Supplying Pvc Surface Modular Double Mounting Plate 6 Module Complete. (Material Only) , Supplying Pvc Surface Modular Double Mounting Plate 8 Module Complete. (Material Only) , Supplying Pvc Surface Modular Double Mounting Plate 12 Module Complete. (Material Only) , Supplying Pvc Surface Modular Double Mounting Plate 16/18 Module Complete. (Material Only) , Supplying Pvc Surface Modular Switch Box With Double Mounting Plate For 3 Module Complete. (Material Only) , Supplying Pvc Surface Modular Switch Box With Double Mounting Plate For 6 Module Complete.(Material Only) , Supplying Pvc Surface Modular Switch Box With Double Mounting & Front Plate For 8 Module Complete Duly Connected. (Material Only) , Supplying Pvc Surface Modular Switch Box With Double Mounting Plate For 12 Module Complete. (Material Only) , Supplying Pvc Surface Modular Switch Box With Double Mounting Plate For 16/18 Module Complete. (Material Only) , Supplying And Erecting Exhaust Fan Medium Duty 230 V A.C. 50 Cycles 225 Mm. 1400 Rpm With Condenser Complete Erected In Position With Necessary Materials. Fan Motor With Moisture Proof Treatment And ‘E Class Insulation. (Material + Labour) , Making Trench In Soft Soil Having 0.75M Depth And Minimum 0.3M Width For Laying Provided Cables Up To Voltage Level Of 1.1Kv Complete As Per Specification No. Cw-Exn-Ctr , Supplying 6 To 32A, 10Ka, Spmcb Suitable To Fix In 1 Module Of Modular Switch In Provided Box Complete & Duly Concealed With Necessary Material And Connected. (Material Only)
Contract Date: Ref. Documents Contract Value : 6.45 Lakh
Boards / Undertakings / PSU No of Bidders 4
Maharashtra View Result →
16.
Agriculture #11328645 AOC
Bids Are invited for Customized Amc/Cmc For Pre-Owned Products - Duvcon,Indosaw Moisture Meter; Duvcon,Indosaw; Annual Maintenance Contract (Amc); Quarterly; Yes - Maintenance Service/ Repair Of Moisture Metre (Mm) , Repair Of Mm Printer , Repair Of Power Adapter Of Mm (9V) , Repair Of Power Adapter Of Mm Printer (5V) , Repair Of Mm Printer Data Cable (Rs 232) , Repair Of Operating/ Ratchet Handle , 74148 , 1-K , 10K Present , 14 Pin Dip Ic Holder , 16 Pin Dip Holder , 203, 105, 502, 503 Tre Ot , 22 Ohm , 25 V, 10 Uf , 25V, 100 Uf , 25V, 470 Uf , 28 Pin Dip Holder , 4.7 K Network Resistance , 40 Pin Handle , 40 Pin Header Set , 40 Pin Male Header , 470 Ohm 1% Tolerance , 5V Dpdt , Atmega 328P Set , Base Plate Complete , Battery Compartment , Bell Switch , Beveal Gear , Bevel Pin , Bevel Pinion , Bottom Plunger , Bracket , Buzzer , Carrier Handle , Com. Meggar Box , Complete Pcb With Printer Facility , Complete Sticker (Duvcon) , Complete Sticker (Indosaw) , Connector Lead 12 Pins , Connector Lead 2/3 Pins , Crystal 6.144 Mhz , Dc Socket/ Phono Socket , Electronic Switch , Eprom , F.N.D. Board , Guide Nut , Ic 146818A , Ic 4051 , Ic 7135 , Ic 74373 , Ic 7447 , Ic 7448 , Ic 7600 , Ic 7660 , Ic 7805/ Ic Regulator 7805 , Ic Base 16 Pins , Ic Base 20 Pin , Ic Base 28 Pins , Ic Base 8 Pin , Insulation Disc , Keypad (Duvcon) , Keypad (Indosaw) , Keypad Duvcon , Lcd/ Led/ Pcb Display , Lead Screw , Max 232 , Max 8031/ Micro Controller , Mm Body (Duvcon) , Mm Body (Indowsaw) , Module Cell For Date & Time , Pcb Press Switch , Pinion Bush , Pointer , Pre Volt Circuit Set , Pressue Plate , Printer Ic , Printer Port , Relay , Rice Module , S 9014 , S9014 , Spur Gear , Spur Gear Axle , Spur Pinion , Switching Transistor (Bc 107) , Temprature Sensor , Test Cup , Test Cup Handle , Thrust Bearing , Timer Ic 7555 , Transformer , Trimpot 1M, 5K, 20 K Or 50 K , Volume Cup A , Volume Cup B , Volume Cup C , Wire 1.25 , Wooden Base , Lcd Controller , Display Ic , Ratchet Handle , Supply Set , Cell Leak Proof 1.5V , Oil & Greasing , Ic 7400 , Funnel Strip , Complete Gear Set , Electronic Led Card , Ad Converter
Contract Date: Ref. Documents Contract Value : 10,693
Boards / Undertakings / PSU No of Bidders 3
19.
Educational and Research Institute #11317498 Price Bid
Tender for Purchase Of Lab Equipments Foreee Dept , Purchase Of Lab Equipments For Eee Dept , Single Phase Transformer. Itemcode:B002 Single Phase Transformer,Rating: 1 Kva, 50 Hz, Input: 230 V Ac Output: 115 V Ac,Type: Air-Cooled, Single-Phase Step-Down Transformer  Properly Insulated Input And Output Terminals Brought Out For  Safe Operation). , Acidity Test Kit Itemcode:B005 Specifications: Ethyl Alcohol Sodium Carbonate Solution Universal Indicator Solution Laboratory-Grade Test Tubes Droppers Colour Comparison Chart For Test Result Comparison Chemicals Supplied In Labelled Containers With Safety Instructions Suitable For Laboratory Educational And Testing Applications , Dc Stepper Motor Drive Kit With Stepper Motor Itemcode:B010 Specifications: Stepper Motor : Permanent Magnet / Hybrid Type With Suitable Driver Circuits. Motor Operating Voltage : 12-24 V Dc Variable Speed Control Forward And Reverse Direction Control Full Step And Half Step Operation Manual / Automatic Pulse Generation Facility Built-In Regulated Dc Power Supply Led Indication For Phase Sequence And Status Test Points Provided For Waveform Observation Start / Stop Control Switches To Be Provided Overload And Short Circuit Protection To Be Provided Mounted On Compact Powder Coated Cabinet With Printed Circuit Diagram Proper Insulated Terminals And Interconnecting Leads To Be Provided Patch Chords For Interconnection , Dc Servo Motor Drive Kit With Servo Motor Itemcode:B011 Specifications: Input Supply : 230 V Ac, 50 Hz Servo Motor Type : Dc Servo Motor With Feedback Arrangement Motor Operating Voltage : 12-24 V Dc Controller Type : Microcontroller Based Servo Drive Controller Speed Control : Variable Speed Control To Be Provided Position Control : Angular Position Control Facility To Be Provided Direction Control : Forward And Reverse Operation Feedback Device : Encoder / Potentiometer Based Feedback System Built-In Regulated Dc Power Supply Led Indications For Power And Status Test Points To Be Provided For Signal Observation And Analysis Start / Stop Control Switches Provided Overload And Short Circuit Protection To Be Provided Mounted On Powder Coated Cabinet With Printed Circuit Diagram Proper Insulated Terminals And Interconnecting Leads To Be Provided , Three Phase Resistive Load Itemcode:B013 Specifications: Rating: 5.25 Kw Supply: 415 V Ac, 3-Phase, 50 Hz Total Number Of Load Steps: 6 Main Switch To Be Provided Approximate Dimensions: 18 × 18 × 22 Inches (L × B × H) Comprising Special Cement-Insulated Electrical Load Resistors Mounted On Powder-Coated Ms Panel/Enclosure Individual On/Off Rotary Switches For Load Selection Mounted On Rubber Wheels/Casters For Portability Suitable For Laboratory Load Testing Applications Proper Insulation, Ventilation, And Earthing Arrangement To Be Provided , Single Phase Single Pulse / Sinusoidal Pwm Inverter Using Mosfet/Igbt Kit Itemcode:B028 Specifications: Type : Single Phase Pwm Inverter Trainer Power Device : Mosfet / Igbt Based Inverter Circuit Input Supply : 12-24 V Dc Output Voltage : 30 V Rms Ac Output Phase : Single Phase Output Frequency : 0-50 Hz Variable Output Power : 100 W Single Pulse Pwm Operation Sinusoidal Pwm (Spwm) Operation Variable Frequency Control Pwm Generation And Firing Control Circuit Inbuilt Gate Drivercircuit Provided Test Points Provided For Waveform Observation And Analysis Built-In Resistive Load Provision , On / Off Control Of Lamp Using Solid State Relay Kit Itemcode:B029 Specifications: Type : Solid State Relay (Ssr) Trainer Kit Control/Input Voltage : 12 V / 24 V Dc Or Up To 30 V Dc Output Load Voltage : 230 V Ac, Single Phase Load Control : On/Off Control Of Ac Lamp Load Solid State Relay Based Switching Circuit Opto-Isolated Input Control Built-In Ac Lamp Load Manual On/Off Switching Arrangement Led Indication For Input And Output Status , Speed Control Of Ac Motor Using Vfd Drive Module With Ac Motor Itemcode:B030 Specifications: Type : Variable Frequency Drive (Vfd) Module Input Supply : 415 V Ac, Three Phase, 50 Hz Output : Three Phase Variable Voltage And Variable Frequency Ac Output 1 Hpthree Phase Squirrel Cage Induction Motor415 V Ac 50 Hz &1440 Rpm Control Technique : Pwm / Spwm Based Control Frequency Range : 0-50 Hz Variable Digital Display For Frequency And Operating Parameters Start / Stop And Forward / Reverse Control Acceleration And Deceleration Control Facility Powder Coated Ms Control Panel Tabletop / Floor Mounted Laboratory Type Setup Clearly Labelled Circuit Diagram And Control Switches Proper Insulated Terminals And Earthing Arrangement , Plc Tranier Kit Itemcode:B031 Specifications: Plc Make :Allen-Bradley / Delta Electronics / Siemens Or Equivalent Digital Inputs : 8-20 Nos. Digital Outputs : 6-12 Nos. Analog Inputs 2 Numbers - 0-10 V (Led / Relay Type Indication) Communication Port : Rs232 / Usb / Ethernet (If Available) Programming Method : Ladder Logic Programming Toggle Switches For Digital Input Simulation Led Indicators For Output Status Indication Analog Potentiometers For Analog Input Experiments Proximity Sensor Interface Provided Relay Output Interface Provided Input Supply : 230 V Ac, 50 Hz Built-In Regulated 24 V Dc Power Supply Ladder Diagram Programming Software To Be Provided Compatible Programming Software License To Be Provided Suitable For Basic Plc Programming And Automation Experiments , Dol Starter Interfacing Kit Itemcode:B032 Specifications: Starter Type: Dol Starter Supply: 3-Phase, 415 V Ac, 50 Hz Motor Compatibility: 1 Hp To 3 Hp Induction Motor Components: Contactor (Ac-3 Duty) Thermal Overload Relay Push Buttons (Start/Stop),Control Voltage: 12 V / 24 V Dc (Isolated),On/Off Status Indicators Fault Indication (Overload Trip) Phase Indication Lamps,Overload Protection (Thermal Relay) Short-Circuit Protection (Mcb/Mccb), Wiring Diagram Displayed On Panel , Star Delta Starter Interfacing Kit Itemcode:B033 Specifications: Supply: 3-Phase, 415 V Ac, 50 Hz Motor Compatibility: 3 Hp To 5 Hp Induction Motor, 3 Contactors: Main Contactor Star Contactor Delta Contactor Thermal Overload Relay Timer (Adjustable Star-Delta Transition, Control Voltage: 12 V / 24 V Dc (Isolated) Interface Type: Relay-Based Isolation) Push Buttons (Start/Stop), Automatic Mode (Timer-Based), Phase Indication Lamps (R, Y, B) Star Mode Indicator Delta Mode Indicator Overload/Fault Indication, Overload Protection (Thermal Relay) Short-Circuit Protection (Mcb/Mccb) Phase Failure / Phase Sequence Protection (Recommended) Electrical Interlocking (Star ↔ Delta) Mechanical Interlocking Between Contactors , Conveyor Arrangement With Sirenitemcode:B034 Specifications: Input Supply : 12 V Dc / 24 V Dc / 230 V Ac, 50 Hz Control Mode : Manual / Automatic Operation Using Plc Conveyor Arrangement With Geared Dc Motor Provided Proximity Sensor Provided For Object Detection Start And Stop Push Buttons Provided Audio Siren Indication Provided Plc Based Control And Sequencing Operation Provided Mini Conveyor Setup Suitable For Laboratory Demonstration Geared Dc Motor Driven Conveyor Mechanism Smooth Belt Movement With Roller Arrangement , 3 Floor Lift Interfacing Model Itemcode:B036 Specifictions: Type: Table-Top Lift Model Floors: 3 Levels Structure: Transparent Acrylic / Ms Frame Cabin: Moving Lift Car With Guide Rails Drive: Dc Geared Motor / Steppermotor Motion: Up/Down Movement, Floor Indication Leds (1, 2, 3) Direction Indicators (Up/Down), Start & Stop Atevery Stage, Over Load Limit Control Three-Floor Lift Operation Plc Interfacing And Programming Floor Selection Logic Automatic Stopping At Floors Direction Indication System Educational Demonstration Of Elevator Automation.. 24 Volts Control Voltage From Plc.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
20.
Public Administrative Department #11317492 Technical Bid
Tender For Distribution Of Electrical Spare Parts Required For Street Lighting And Municipal Buildings- 1 4 Feet Flourescent Tube Light 2 40W Copper Choke 3 40W Tube Light Starter 4 36W / 40W Tubelight Electronic Choke 5 Tube Light Side Lock Holder 6 Insluation Gum Tape Roll - Isi 7 1/18 Copper Wire Pvc To Pvc 8 3/20 Copper Wire Pvc To Pvc 9 7/20 Copper Wire Pvc To Pvc 10 1.5 Sq.Mm 3 Core Copper Cable 11 2.5 Sq.Mm 3 Core Copper Cable 12 4 Sq.Mm 3 Core Copper Cable 13 Led Fitting Top Protection Glass - Street Light 14 20 / 25 Mm 1 No Gi Bend Pipe, With 2Nos Of Pole Clamps With Bolts And Nuts 15 32 / 40 Mm 1 No Gi Bend Pipe, With 2Nos Of Pole Clamps With Bolts And Nuts 16 6Amps To 32 Amps Sp Mcb 17 40Amps 2Pole Isolator 18 63Amps 4Pole Isolator 19 32A D.P Switch 20 Mcb Box 21 Fuse Unit 16 Amps 240V 22 Fuse Unit 32 Amps 415V 23 Fuse Unit 63 Amps 415V 24 Main Switches Spn 16 Amps 25 Main Switches Tpn 16 Amps 26 Main Switches Spn 32 Amps 27 Main Switches Tpn 32 Amps 28 Main Switches Tpn 63 Amps 29 Automatic On/Off Street Light Timer Switch With 24Hrs 7 Days Programable Digital Timer Clock, 40 Amps 4 Pole Contactor With Coil, Mcb Switch And Connector Fully Wired With All Accessories 30 Street Light Meter/Main Box With Wooden Board, Main Switch, Fuse Carrier Fully Wired With All Accessories 31 Electronic 7 Days 24 Hrs Programable Ditial Timer Clock 32 63 Amps 4 Pole Contact With Coil 33 220V - 250V Contactor Coil 34 20W High Bright Led 4 Feet Light 35 150W Led Power Saver Flood Light Fittings 36 40W All-In-One Solar Led Street Light Fittings 37 60W All-In-One Solar Led Street Light Fittings
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
21.
Public Administrative Department #11310503 AOC
Tender for Supply Of Electrical Materials For The Repair And Maintenance Of Street Light , Details , T-5 Power/Energy Saver 2X24w Choke , T-5 Power/Energy Saver 24W Ftl Tuberod , 2X24 T5-Holder , T5 Power Saver 2X24 Fixture Acrylic Transparent Cover , T5 Power Saver 4X24 Fixture Acrylic Transparent Cover , 150W Hpsv Choke , 150W Hpsv Lamp , Capacitor 33Mfd 250Vac 50 Hz , Electronic Ignitor Suitable For 150W Hpsv Lamps , 150W Holder (Porcelain) , Led Driver 50W Bis Certified , Led Mcpcb Plate 60W , Led Mcpcb Plate 50W , Led Mcpcb Plate 150W , Supplyingof Isi Marked And Approved Make Of Moulded Case Circuit Breaker(Mccb) Suitable For 3Phase,3Pole,50Hz,415 Volts, Ac Supply With Respective Interrupting Capacity(Ka) At 415 Volts Cited Against Their Range Standard Conforming To Is - 8828: 8.1Mccb With Breaking Capacity 25 Ka At 415 V: Current Rating -125 Amps & 70% -100% Adjustable , Supply Of Sovp Device Should Have Single High Capacity Varistor In The L-N Plug And Encapsulated Spark Gap For N-Pe, L-N Sovp Should Have A Rated Voltage Of Minimum 320V Ac To Handle Indian Power Supply Conditions. Sovp Should Have Visual Indication On Replaceable Varistor And Spark Gap Modules As Well As A Potential Free Contact On The Socket For Remote Indication. Sovp Device Should Be Wired Up As Per Tt Configuration Of Wiring In Accordance With En 61643-11 Standards. Both The L-N And N-Pe, Spds Should Be Rated For Handling 30Ka Of Nominal 8/20 Μs Surge Current.: Sovp For Pole Light Sub Feeder Panels - Type 2 Pluggable Spd 3+1, Rating L-N/N-Pe Uc 255/320 V In 30/60Ka Ka, Lmax 30Ka/60 Ka, Up 1.5Kv , Supplying Of Isi Marked And Accepted Standard Of Miniature Circuit Breaker(Mcb)Ofcseries Suitable For 240/415Volts,50Cycle,10 Ka Value Ac Supply Confirming To Is:8828:1996,Iec:60898 :2002 But Without Enclosures: Single Pole 63 Amp. , Astronomical Timer With Dst Feature , Contactor 3 Pole 90 annual periodical maintenance 50Hz 415Volts With No-Nc Contacts , Tpn Connector 150A , Supply Of Approved Make Powder Coated Sheet Steel Encloser Spn Mcb Db Inclusive Of Busbar,Neutral Bar,Earth Bar & Two Earth Terminals Etc. Complete As Per Is:13032 (Exclusive Of Mcb & Isolator): 8 Way Double Door , Supply Of Sovp Device Should Have Single High Capacity Varistor In The L-N Plug And Encapsulated Spark Gap For N-Pe, L-N Sovp Should Have A Rated Voltage Of Minimum 320V Ac To Handle Indian Power Supply Conditions. Sovp Should Have Visual Indication On Replaceable Varistor And Spark Gap Modules As Well As A Potential Free Contact On The Socket For Remote Indication. Sovp Device Should Be Wired Up As Per Tt Configuration Of Wiring In Accordance With En 61643-11 Standards. Both The L-N And N-Pe, Spds Should Be Rated For Handling 30Ka Of Nominal 8/20 Μs Surge Current.: Sovp For Pole Light - Type 2 Pluggable Spd 1+1, Rating L-N/N- Pe Uc 230/400 V In 5 Ka, Imax 10 Ka, Up 1.2Kv , Led Batten Tubelight 20W , Supplying Of Approved Make Tpn Mcbdb Metal Double Door With Provision For Fpmcb/Isolator/Rccb/Rcbo As Incomer And Sp Mcbs As Outgoing Inclusive Of Busbar,Neutral Bar,Earth Bar & Two Earth Terminals Etc. Complete As Per Is:13032 (Exclusive Of Mcb & Isolator ): 8 Way (8+24) , 8 Sq.Mm Multistrand Pvc Insulated Copper Wire Bundle 90Mtr , 1.Sq.Mm Aluminium Single Core Wire Bundle Of 100Mtr. Isi Marked , Xlpe Insulated Power Cable( Conforming Is-7098 Part-1) 1100 Volt Grade 2-Core Isi Marked With Alu. Stranded/Solid Conductor: 16 Sq.Mm Unarmoured , Xlpe Insulated Power Cable( Conforming Is-7098 Part-1) 1100 Volt Grade 4-Core Isi Marked With Alu. Stranded/Solid Conductor: 16 Sq.Mm Unarmoured , Xlpe Insulated Power Cable( Conforming Is-7098 Part-1) 1100 Volt Grade 1-Core Isi Marked With Alu. Stranded/Solid Conductor: 25Sq.Mm Unarmoured , Wooden Ladder 21Ft , Toolkit Set Consisting Of Different Sizes L-Keys, Screw Drivers, Testers And Plier Set. , Taperoll Box Consisting Of 30Pcs (Conforms To Is: 7809 (Part 3, Sec 1),Self Extinguishing,Protects From Electrolytic Corrosion,Excellent Water Resistance,Suitable For Primary Insulation Up To 440V)
Contract Date: Jun 29, 2026 Contract Value : 60,699
Local Bodies No of Bidders 3
Madhya Pradesh View Result →
22.
Housing Urban and Rular Development #11300693 AOC
Tender for Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : B)All Types Of Ordinary Rock Including All Types Of Laterite Rock, Blasting Prohibited , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. A All Kinds Of Soil , Earthwork In Surface Excavation Not Exceeding 30 Cm Depth(But Exceeding 1.5 M Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Beyond Work Site For All Leads Lift Disposed Earth To Be Leveled And Neatly Dressed In: B Hard Soil , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggrt. 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: A) All Works Upto Plinth Level , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Foundations, Footings, Bases For Columns , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Providing & Laying Of Minimun 80Mm Thick Factory Made Shot Blasted Cement Concrete Interlocking Paver Blocks Of Minimum M40 And Above Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Approved Size And Design/ Shape Laid In 50Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand Etc. All Completed As Per The Direction Of Engineer-Incharge. The Product Should Comply With Is 15658: 2006 And Manufactured By Iso 9001: 2008 Certified Plant.1)Size: 210Mm X 150Mm X 80Mm Thick (Type: Rectangular Type Pavers) , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of (Sail, Tata. Vizag, Jsw ,Apollo Steel Ltd.) Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification.A)Size 30 Cm L X 50 Cm H X 15 Cm T , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Providing & Fixing Of Seater Made Of Cast Iron And Powder Coated Complete As Per Direction Of Engineer-In-Charge, ManufacturerS Specification & Drawing. , Providing And Fixing Of A Artificial Cricket Pitch , Monia Tiles , Supplying And Installation, Fixing Nylon Net All Around Verticle Net Garware Make Or Its Equivalent 50Mmx50mmx2.50Mm Thick As Approved By The Engineer-In-Charge.Top Net 50X50mm X1.75Mm Thick.Wirerope Complete Fixing Of Wire Ropes Of 5Mm With Turnbuckleand Dog Clips. Etc. Complete .( Contractor Has To Bear All The Cost And Arrange All Permissions For Interstate Transit Of Goods Including Storage Of The Goods). , Triangle Brush And Handy Turf Brush Set , Sbr Enfield , Supplying And Erecting Integrated Led Round Burial Light 6W Ip65 & Ik10 Class Having Pressure Die-Cast Housing, Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 85 Lumen/W, Cri80, Cct Upto 6500K, Thd10%, P.F. 0.90, Operating Range Of 100-240V, Inbuilt Surge Protection Of 2 Kv, Life Class Of 50,000 Hrs At L50b50 , Slat Spray Tested For 500 Hrs. Including Making Of Recess Of Appropriate Size For Flushing Into Surface With Minimum 2 Year Warranty As Per Specification No Fg-Odf/Pt. , Supplying And Erecting Integrated Led Flood Light Fitting Max. 195W Ip65 & Ik07 Class Having Pressure Die-Cast Aluminium Housing, Having System Lumens Output Of Min. 23400 Lumens, Min. Efficacy Of 120 Lumen/W, Cri70, Cct Upto 6500K, Thd10%, P.F. 0.90, Operating Range Of 140-270V, Inbuilt Surge Protection Of 4 Kv, Life Class Of 50,000 Hrs At L70b50 Including Driver With U Shaped Bracket With Minimum 2 Years Warranty As Per Specification No. Fg Odf/Fl. , Supplying And Erecting Led Square / Circular Max. 14 W Down Lighter / Panel Light Having Pressure Die-Cast Aluminium Housing, Polystyrene Diffuser Having System Lumens Output Of Min. 1500 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Max. Ripple Of 5%, Thd0.95, Operating Range Of 120-270V, Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70b50 Including Driver, Having Mounting Arrangement With Board For Surface Type Or Spring Loaded Mounting Clips Complete With Minimum 2 Years Warranty As Per Specification No. Fg-Idf/Led. , Supply And Erecting Of 9 Inch (225 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories(A) Cat A. , Supplying And Erecting Concealed Type Foot/Step Light Max. 5W Having Ip67, Ik10 Rated Pressure Die Cast Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs At L70b50, Including Driver By Making Necessary Arrangement / Recess In Wall To Make It Flush With Surface With Minimum 2 Year Warranty. , Supplying And Erecting Integrated Led Post Top 45W Ip65 & Ik10 Class Having Die Cast Aluminium Housing With Uv Protected Polycarbonate Diffuser, Having System Lumens Output Of Min.4500 Lumens, Min. Efficacy Of 105 Lumen/W, Cri80, Cct Upto 6500K, Thd10%, P.F. 0.90, Operating Range Of 140-240V, Inbuilt Surge Protection Of 2 Kv, Life Class Of 30,000 Hrs At L50b50 , Including Driver Complete With Minimum 2 Year Warranty As Per Specification No Fg-Odf/Pt. , Supply And Erecting Of 3 Mtr High Decorative Pole With Base Plate And Pole Cap , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 50 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required. , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Masonry Open Duct, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required.. 4 Core 4 Sq.Mm , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 Core 50 Sq.Mm , Supplying And Laying (Including Excavation Of Suitable Width & Depth Up To 90 Cm) 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) Of Hdpe For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete. , Supplying&Erectingwatertightterminalboxof1.6Mm(16Gauge)Crcasheet Of Size 200 X 150 X 150 Mm. Complete On Pole As Per Specification No. Cb-Sb , Supply And Providing Chemical Earthing System (Pipe In Pipe Type) With Outer Pipe Of The Electrode Having Minimum 50Mm Diameter As Per The Enclosed Specifiations And Drawing.The Outer And The Inner Hot Dip Galvanised Ms Pipes Shall Conform To The Specifications And The Space Inbetween Shall Be Filled With Highly Crystalline Conductive And Anti- Corrosive Mixture Conforming To Is-3043. The Earth Electrode Shall Be Cpri Tested. The Scope Of Work Includes Boring( 300Mm Dia Mimnimum)/Exvavation Of Soil/Hard Rock, Refilling With Required Quantity Of Back Fill Compound/Ground Resistance Enhancement Powder Of Requisite Quantity, Compaction, Constuction Of Masonary Chamber Etc Complete As Required To Obtain The Desired Value. Aluminium Tag With Embossed Earthing Value Shall Be Permanently Attached To The Pipe Electrode(B) 2 Metres Length Electrode , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 8 Swg Copper Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Supply Of Back Fill Compound/ Groung Resistance Enhancement Powder Conforming To The Enclosed Specifications. , Design Fabrication , Supply , Installation , Testing And Commissioning Of Outdoor Light Panel Made Out Of 14 Swg Crca Sheet , Degreased , Derusted And Painted With Two Coats Of Red Oxide Primer And Two Coats Of Siemens Grey Epoxy Paint And Conforming To Ip 54 Class Of Protection . The Panel Shall Be Suitable For Three Phase 415V , 50 Hz. , Four Wire Ac System And Shall Comprise Of The Following :Auto Manual Swithc 1 Nos Street Light Control 32A 4Pole Contractor 4 Nos. Manual Control Switch With 4 No. / Nc Aux. Contacts One Electronic Timer With 10A Output Contactors For Operating Four Contactors Timer Unit Shall Be In A Separate Compartment With Glass Seal Provision If Any. And Possible To Adjust The Time Settings .3 Phase Meter And Mcb Arrangment With Modem And As Per Ged Requirement . Along With Necessary Stand And Earthting Brought Forward For Necesaary Connection On Both Side Of Panel Incomer63 Amps 4Pole,36 Ka Mccb, With Neutral Contactor, Selector Switch Shall Be Protected By 2 Amps Tp Mcbs. 1 .Sets1breaker On / Off / Trip Indicating Lights With Control McbS.Set1ryb Lamp Mcb Set1busbar 100 Amps ,415 V Tpn 50 Hz Aluminium Bus Bars With Heat Shrinkable Insulation Sleeve.Set 4 Dg Incomer63 Amps 4Pole,36 Ka Mccb, Ats 63 A With 415 V Tpn 50 Hz Aluminium Bus Bars With Heat Shrinkable Insulation Sleeve.Set 4 Outgoing 32 A 4 Pole Mcb ,36Ka Set1 Spare Feeder63 Amps 4 Pole Mcb ,36 Kaset 1 ,25 Amps 4 Pole Mcb , 36 Ka Set1 , , Design Fabrication , Supply , Installation , Testing And Commissioning Of Outdoor Feeder Pillar Panel Made Out Of 14 Swg Crca Sheet , Degreased , Derusted And Painted With Two Coats Of Red Oxide Primer And Two Coats Of Siemens Grey Epoxy Paint And Conforming To Ip 54 Class Of Protection . The Panel Shall Be Suitable For Three Phase 415V , 50 Hz. , Four Wire Ac System And Shall Comprise Of The Following : Incomer63 Amps 4Pole,36 Ka Mccb, With Neutral Contactor,On / Off / Trip Indicating Lights With Control McbS.Set1ryb Lamp Mcb Set1busbar 100 Amps ,415 V Tpn 50 Hz Aluminium Bus Bars With Heat Shrinkable Insulation Sleeve.Set 20 Outgoing 32 A Four Pole Mcb ,36Ka Set 35 63 Amps 4 Pole Mcb ,36 Kaset 10 ,25 Amps 4 Pole Mcb , 36 Ka Set 10 , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(A) Sp, Cat A , Supplying, Erecting, Testing And Commissioning Of Diesel Generating Set With Alternator Of 58.5 Kva Output Continuous Rating, 3 Phase, 415 V, 50 Hz, 0.8 P.F., A.C. Supply, A Totally Enclosed Air Cooled / Liquid Cooled Multi-Cylinder Diesel Engine Developing Suitable Bhp At 1500 Rpm With 10% Overload For 1 Hour In 12 Hours, Along With Standard Accessories, Self-Excited, Self-Regulated, Screen Protected Alternator With Static Excitation System Running At 1500 Rpm As Per Is 4722-2001 With Voltage Regulation +/- 5 %, With Performance Class G2/G3 And Maximum Fuel Consumption 9.98 Ltr/Hr @75% Loading. Both The Engine And Alternator Direct Coupled On A Common Fabricated Steel Base Frame And Mounted On Anti-Vibrating Pads, With Standard Control Panel Comprising Meters, Switchgears, Indicators Connected With Suitable Wires/Cables, The Complete Set Enclosed In Composite Acoustic Enclosure As Fully Assembled Integral Unit Made Of 16 Swg Crca Sheet, Sound Absorbing Material To Restrict Sound Level Up To 75 Db At 1.0 M, Provided With First Filling Of Oil, Diesel Not Less Than 150 Ltr Etc., On Provided M20 Grade cement concrete Foundation As Per Specification No. Gen-Dg
Contract Date: Jun 17, 2026 Contract Value : 1.20 Crore
Statutory Bodies & Commissions/Committees No of Bidders 2
23.
Public Administrative Department #11293603 AOC
Supplying Street Light Materials For Annual Maintenance In Koradachery Town Panchayat From 2026-2027 , 40W Tube Light , 40W Tube Light Copper Choke , 40W Tube Light Electronic Choke , 40W Tube Light Starter , Tube Light Side Holder , 4 Feet 40W Tube Light Street Light Fitting With Bulb Choke With Pipe, Clamp (Complete Set) , 4 Feet 40W Tube Light Street Light Fittings , Rc Post Clamp 3/4” , Rc Post Clamp 1 1/4” , Pvc Tap Roll , 63Amps Open Type Woodern Board , 63Amps Woodern Board , 1/18 Copper Wire , 3/20 Copper Wire , 7/20 Copper Wire , 7/16 Copper Wire , 7/18 Copper Wire , Silk Wire (1 Sq.Mm) , Gi Wire , 3/4” Gi Street Light Bend Pipe , 1 ¼” Gi Street Light Bend Pipe , 16Ams Main Switch , 32Ams Main Switch , 63Ams Main Switch , 100Ams Main Switch , 16Ams Fuse Carrier , 32Ams Fuse Carrier , 63Ams Fuse Carrier , 100Ams Fuse Carrier , 200Ams Fuse Carrier , 2.5Sq Mm 3Core Flate Cable , 4Sq Mm 3Core Flate Cable , 6Sq Mm 3Core Flate Cable , Lt & Lk Model Timer , Lt & Lk Model Contactar , 32 Amps Aluminium Box , Woodern Board , 1/18 Aluminium Wire , 7/16 Aluminium Wire (2 Core 10 Sq.Mm Cable) , 7/18 Aluminium Wire (2 Core 25 Sq.Mm Cable) , 7/20 Aluminium Wire (2 Core 6 Sq.Mm Cable) , 3/20 Aluminium Wire , 6Amps Mcb , 10Amps Mcb , 16Amps Mcb , 20Amps Mcb , 25Amps Mcb , 32Amps Mcb , 40Amps Mcb , 60Amps Mcb , 32Amps 3 Phase Main Switch , 20W Led Tube Light Fitting , 18W Led Drive Circuit Assembly , 18W Led Street Light Fitting , 24W Led Street Light Fitting , 30W Led Street Light Fitting , 36W Led Street Light Fitting , 45W Led Street Light Fitting , 50W Led Street Light Fitting , 60W Led Street Light Fitting , 72W Led Street Light Fitting , 100W Led Street Light Fitting , 50W Led Flood Light Fitting , 150W Led Flood Light Fitting , 9W Led Bulb , 9W Led Bulb Fitting , 12W Led Bulb , 14W Led Bulb , 14W Led Bulb Fitting , 18W Led Bulb , 18W Led Bulb Fitting , 20W Led Bulb , 23W Led Bulb , 23W Led Bulb Fitting , 25W Led Bulb Fitting , 30W Led Bulb , 30W Led Bulb Fitting , 48W Led Bulb , 48W Led Bulb Fitting , 50W Led Bulb , 50W Led Bulb Fitting , Automatic Switch Complete Set , 1” Gi Bend Pipe With Post Clamp , 1 ¼ ” Gi Bend Pipe With Post Clamp , 2” Gi Bend Pipe With Post Clamp , 3/4” Gi Service Pipe , 1” Gi Service Pipe , 1 ¼” Gi Service Pipe , 32A Isolator With Box , 63A Isolator With Box , 100A Isolator With Box , Shade Aluminum , Hand Gloves , 25Sq Mm 3.5Core Ug Cable , 25Sq Mm 4Core Ug Cable , 6Sq Mm 2Core Ug Cable Aluminium , 6Sq Mm 2Core Ug Cable Aluminium , Meter Board , Main Board (3 X 2 Metal) , Earth Pipe , 3/4 Pvc Electrical Pipe , 1 Pvc Electrical Pipe , 1 Spring Hose , Reals , 4 Way Pvc Read , 8. No Stay Wire , 16 No Stay Wire
Contract Date: Jun 16, 2026 Contract Value : 1.72 Lakh
Local Bodies No of Bidders 2
24.
Defence #11281747 Technical Bid
Tender For Provision Of Defi Md Accommodation At Kota Mil Stn; 1 Lump sum price worked out by the contractor for BUILDING WORKSas listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 2 Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 3 Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 4 Lump sum price worked out by the contractor for ROAD, PATH, CULVERT AND HARD STANDINGas listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 5 Lump sum price worked out by the contractor for SEWAGE DISPOSALas listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 6 Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 7 Lump sum price worked out by the contractor for FENCINGas listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES 8 Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLYas listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 9 Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 10 Lump sum price worked out by the contractor for LIGHTING PROTECTION as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 11 Lump sum price worked out by the contractor for FIRE FIGHTINGas listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 12 Lump sum price worked out by the contractor for LIFT WORKas listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 13 Lump sum price worked out by the contractor for HOT WATER SUPPLYas listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 14 Lump sum price worked out by the contractor for DG SETSas listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES 15 Lump sum price worked out by the contractor for SITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORKas listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES 16 Sch A Part-XVI MISC ITEMS (TO BE QUOTED BY CONTRACTOR) Notes:(i) This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XVSITE CLEARANCE, SITE DEVELOPMENTAND EARTH WORK schedule). 17 INTERNAL WATER SUPPLYS&F for 15mm dia sink mixer (wall mounted) with 150mm long swivel spout,connecting legs and wall flangerswith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F2014511 / Hindware Cat Part No F690058 / Parryware Cat Part No G3335A1 or equivalent make as mentioned in Appx B. 18 S&F for 15mm dia single lever center hole basin mixerwith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F1015451 / Hindware Cat Part No F690012 / Parryware Cat Part No G4863A1 or equivalent make as mentioned in Appx B. 19 S&F for 15mm dia wall mixture with bend pipe for overhead showerwith complete accessories etc complete all as specified and directed.Make: CERA Cat Part No F2002401 / Hindware Cat Part No F330020 / Parryware Cat Part No G3316A1 or equivalent make as mentioned in Appx B. 20 INTERNAL ELECTRIFICATIONS&F ofmodular type 3 pin 20 A socket with SP MCB, conforming to IS 1293: 2005as specified in IS 732: 2019 etc complete all as specified and directed 21 S&F for modular type 1 module RJ-11 telephone socket with shutter etc complete all as specified and directed 22 S&F for modular type 1 module co-axial type TV socket etc complete all as specified and directed 23 S & F for 16 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 24 S & F for 25 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 25 S & F for 32 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 26 S & F for 40 A, 230 V, 50 Hz, 2P MCB (B curve) MCB conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters,IS 732: 2019 etc complete all as specified and directed 27 S&F forSingle Phase Dual Source Pre Paid Meter, Class 1.0, RS485,10/60A Direct,with followingspecification as under : (i) Communication options:, RS485 and RF(ii)Three in one option:Integrate gas & waterupto 4 DI(iii) Programmable tariff for EB, DG and DI for automatic reduction of balance even server is offline(iv) Configurable Holidays,Happy hours to avoidload switching on Holidays/Night(v) Alarm notifications for low credit balance(vi) Eliminate tenantdisputes, meter tampering & manualtariff reading errors 28 S&F forThree Phase Dual Source Pre Paid Meter, Class 1.0, RS485, 5A CT operated,with followingspecification as under : (i) Communication options:, RS485 and RF(ii)Three in one option:Integrate gas & waterupto 4 DI(iii) Programmable tariff for EB, DG and DI for automatic reduction of balance even server is offline(iv) Configurable Holidays,Happy hours to avoidload switching on Holidays/Night(v) Alarm notifications for low credit balance(vi) Eliminate tenantdisputes, meter tampering & manualtariff reading errors 29 S&F of Sheet metal enclosure distribution board VTPN4 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 30 S&F of Sheet metal enclosure distribution board VTPN6 way, 415 voltdouble door powder coated, protection class IP-54 isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & MCCB DBs confirming to IS - 13032, IS-8623, BS EN60898 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed 31 S&F of 160A, 4 pole moulded case circuit breaker (MCCB) with thermal magnetic trip unit (TMD), compression lug connectors, protection against overloads (Ir adjustable from 0.7- 1 X In), protection against short circuits (Isd adjustable from 5- 10 X Ir), inbuilt encapsulated double break roto active type instanteneous protection, earth fault leakage protection, etc. having Ics = 100% = Icu = 16 kA as per IEC 60947-2 and suitable for 3-Phase, 415 V, 50 Hz electric supply etc complete all as specified and directed by engineer-in-charge. 32 S&F for 12W LED Downlight having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz etc complete all as specified and directed . 33 S&F for LED light fitting with high 10 watt 220 V AC decorative wall type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directed . 34 S&F for 10W LED bulk head light having Luminous efficacy of > 100, input voltage range 140-270 V, input frequency 50-60 Hz etc complete all as specified and directed. 35 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 600 mm sweep. Min air delivery 115 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) etc complete all as specified and directed by engineer-in-charge. 36 Supply and fix Wall Mounting Fan, steel body AC single Phase, 230V,With Sweep Size, 200mm ; Motor Speed 84CMM, 3 blades, and frame and louvers etc complete all as specified and directed by engineer-in-charge. 37 Supply, installation, testing and commissioning of factory made, indoor cubical compartmental type BUILDING PANEL (TTA) of suitable size for short circuit, temperature rise, protective earth short circuit test and dielectric tests of required ratings, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 42 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enameled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed by engineer-in-charge.The BUILDING PANEL shall comprise of the following:(A) Bus bar Chamber(i) 01 Set (3L + N) of copper busbar of rated capacity 400A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connections. 38 (B) Incoming:- (i)320A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, having microprocessor based trip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 01 No.(ii) Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 No.(iii) LED phase indicators (Red, Yellow, Blue)- 01 Set 39 (C) Outgoing:-(i)40A, 415 V, Ics = 100% Icu = 16 kA, 50 Hz 4P MCCB, conforming to IEC 60947-2, havingtrip unit, adjustable overload setting (0.7 - 1 X In), adjustable short-circuit setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (ready, overload and pre-alarm & overload)- 08 Nos(ii) LED phase indicators (Red, Yellow, Blue)- 08 Sets 40 SEWAGE DISPOSALS&F for DWCPE (SN8) 180mm outer dia and 163 inner dia of pipe for depth 0.70mm to 1.65m, laid on 150 mm thick bed (1:4:8)with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 41 S&F for DWCPE (SN8) 200mm outer dia and 175 inner dia of pipe for depth 0.70mm to 1.65m, laid on 150 mm thick bed (1:4:8) with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 42 S&F for DWCPE (SN8) 300mm outer dia and 260 inner dia of pipe for depth 1.65mm to 2.3m, laid on 150 mm thick bed (1:4:8) with excavation in any type of soil including manholes/drop manhole of standard sizemade of brick mosonary /RCC/Precast RCC with SFRC ventilating cover and frame,includes all items and activities to execute and make sewer line functionaletc complete all as specified and directed. 43 Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-7 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 44 S&F forNonclog submersible (sewage disposal), pump set, electric driven 415 Volts 3 Phase 50 Hz, supply comprising of pump with cast iron impellors, submersible motor of suitable capacity, coupling, at discharge 3360 to 480 LPM and minimum discharge should be less than 480 LPM at minimum head 14 m.including chain pully block of two MT capacity 01 Noandsuitable arrangement for hanging the motor through chain of requirement of delivery of pump connected to main pipe line by suitabe HDPE pipe of size 150mm Dia for required length with necessary connection etc all as specified and as directed. 45 Supply,installing, testingand commissioningout door type LT feeder piller box of suitable size 750X750X450 mm, pedestal mounted, CPRI type test totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, framing with 50 x50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and paintedto both internal and External surfaces with powder coating paint in heatprocess of sheet and suitable for 415 volts, 50 Hz, 3 phase 4 wire system and comprising with and includingfollowing accessories and mounted on PCC Platform made out of100 mm thick PCC (1:3:6),0.45 Mtr all round the panel board etc complete with the following items :- 46 Incoming:- (i) Copper bus bar made up of copper strip100 amps duly mounted on bakelite insulatorssleevings of standard colour code - 01 Set. (04 No strips for Phases & Neutral)(ii) MCCB TPN 415 Volts,63 Amps, 50 Hz, breaking capacity 25 KA with fixed thermal & magnetic setting ( For Incomming ) - 01 No.Outgoing:-(i) MCB TP 415 volts 32 Amps, breaking capacity 16 KA with fixed thermal & magnetic setting ( For FPB2 ) - 03 Nos(2 nos for pump 1 nos for spare). (ii) FASD Starter for 15 HP Motor with single phase preventer, OLP and dry run protector- 02 Nos 47 (iii) Analogue type modular volt meterof range 0-500 volts -01 No(iv)Volt meter selector switch-01 No.(v) Analogue typeAmmeter of range 0-200 Amp-01 No(vi) Ammeter selector switch-01 No(set of three)(vii) Indicator lamp with integral circuit (230/240 volt) and cluster LED (Red, Orange, Blue) - 01 set(viii) CT 200/5 Amps - 3 Nos 48 Supply and FixingDI/CI special fittings of any size,type,radius angle,tapers increasing decreasing sockets,tees,tail piece and collars etc complete upto 200 mm dia etc complete all as specified and directed. 49 S&F forPVC insulated and sheathed 1100 volts grade flat type submersible 06 sqmm cable three core multi stranded conductor etc complete all as specified and directed . 50 M&L for Making drill hole by trenchless technologyof suitable size under road for laying pipe line of size150mm bore at 1 metre depth from the road level etc complete all as specified and directed.Note :- Drill hole (trenchless) shall be done without disturbing top surfaces of road by appropriate machine. 51 M&L for steel gate 5.45 m wide and 2.70 m height with RCC pillar including excavation in any type of soil, plastering, painting, etc complete all as specified and shown in TD/2008/101 sheet No 1/3 to 3/3 52 EXTERNAL WATER SUPPLY Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 100mm bore class K-9 with spigot and socket ends conforming to IS 8329/2000, IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 53 Supply, lay, commissioning, jointing and testing ofcentrifugally cast (spun) ductile iron pipes of 150mm bore class K-9 IS: 12288 : 1987 code of practice for laying in trenches complete all as specified and directed.Note: The rate quoted by contractor are inclusive of all type of Joints. 54 Supply and FixingDI/CI special fittings of any size,type,radius angle,tapers increasing decreasing sockets,tees,tail piece and collars etc complete upto 200 mm dia etc complete all as specified and directed. 55 Supply and fix CI foot valve with leather washer, ofsize 100 mm , lift and swing, single door, IS 4038 marked one with each pump suction line complete all as specified and directed. 56 M&L for construction of valve chamber of brick masonry from the top of surface with MS covers 3.15 mm thick and 40x40x6 mm MS angle with hinges for locking arrangement including excavation and earth works PCC (1:3:6) type C2 for foundation PCC bed/coping in cement concrete (1:2:4) type B1, plastering in CM 1:3 painting with two coats of synthetic enamel paint over a coat of red oxide primerfor the size of chamber 1200 mm x 1200 mm x 1200 mm (internal dimention) complete all as specified and directed. 57 Supply, install,commissioning and testing of Horizontal split case cetrifugal pump set 1450 RPM having an output of minimum 1100 LPM at a head of 45 mtr coupled to 3 phase 415 volt squirel case induction motor of adequate capacity complete all as ditected by Engr-in-charge with and including following :-(a) Necessary cable for interconnection between starter panel & pump set with 1100 volt rated copperinsulated unarmoured cable of minium 10 sqmm 3 core cable(b) Single phase preventer (current sensing type)(c) Necessary light grade GI pipe protection for cabling from pump set to LT panel.(d) Bourden pressure gauge.(e) MS pipe flanged type class B of size 100 mm bore upto foot valve from suction end of pump.(f) PCC foundation in type B-2, 1:2:4 using 20mm graded aggregate, 20cm above ground level and 30cm below grond level including grouting of eye bolts nut etc. for pump set of adequate size or as per manufacturers recommendations.Note: All other items/material requiredfor fixing pumpset shall be included in cost quoted.(ii) Foundation drawing shall be approved by GE/ Eng-In- Charge before fixing the pump set. 58 Supply, installations, testing and commissioning of factory made LT Indoor cubical typepanel boardhaving 150 Amp rated copper bus bar with neoprene rubber gasket and locking arrangement, dust,weather and verminproof , free standing, floor mounting type self ventilation with wire mesh,totally enclosed busbar chamber fully comparted type, front openable hinged independent door for each compartment with locking arrangement and common openable hinged door from rear side of suitable size made out of 2mm thick CRCA sheet duly painted with seven tank process,415 V,TPN,50Hz both side properly welded MS angular supported with chanel frame of size 50mm,at all vertical corner grouted in PCC 1:3:6 (Type-C1 using 20mm graded stone aggregate) and connecting the incomming/outgoing feeder by providing brass cable glands and Lugs complete all as specified and directed comprising of followings accessories:- 59 Incoming:- (i) MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than 36 KA (Ics=100 % of Icu) with adjustable thermal Setting-01 No.Outgoing:-(i)MCCB 3 Pole 63 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with adjustable thermal Setting - 02 Nos (ii) Single phase preventor -02 Nos(iii) On load Change over switch 4 pole of current raring 63 A (open execution type) - 01 No(iv)MCB SPN 10 Amp C curve, 10 KA capacity - 01 No(v) fully automatic Star-delta starter 15 HP or recommended by manufacturer of motor -02 Nos(vi) LED Indicator lamp (R,Y,B)- Set of Three.(vii) Multifunctional meterDigital type showing V,A,F,Pf,KW,KWH inbuilt selector switch with CT coiles for three phase -0 1No. 60 M&L for construction of header of ERW pipe having size dia 300 mm and length 2.5 m with two inlet connection of size 100 mm & three otlet connection having size 150 mm complete monting on RCC base/plinth etc complete all as specified and as directed by Engr-in-charge. 61 EXTERNAL ELECTRIFICATIONBoring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for laying under ground pipe upto 100mm dia complete all as specified and directed.Note :- GI pipe shall be measured and paid separately. 62 Taking out existing HT XLPE U/G cables, 11000 V grade from trenches/ducts/ poles etc of size 120 Sq. mm 3 Core etccomplete all as specified and directed. 63 Dismantling and taking down existing transformer mounted on four pole structure and shifting to nearest suitable location including its fixing on newly constructed platform and making all connection, testing as per requirementetccomplete all as specified and directed. 64 Dismantling and taking down existing 4-pole structure etccomplete all as specified and directed. 65 Dismantling and taking down existing 03 Nos of LT Panels, refixing at specified locationincluding connecting etc complete all specified and directed. 66 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size 240 Sq. mm 3.5 Core etc complete all as specified and directed. 67 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size 185 Sq. mm 3.5 Core etc complete all as specified and directed. 68 Taking out existing LT XLPE U/G cables, 1100 V grade from trenches/ducts/ poles etc of size upto 95 Sq. mm 3.5 Core etc complete all as specified and directed.Note For item No. 57 to 63 :- The old material obtained from site shall be deposite by contractor in MES store yard without any extra cost as directed by GE. 69 M&L for construction of plateform of size 3500 x 3500 x 1200mm with brick construction in cement mortar 1:4 PCC (M-10 nominal mix) in foundation, 100mm thick RCC M-25 grade slab, with 8mm MS TMT bars 120mm c/c on bothway, brick masonary steps on one side XPM Jali fixed on angle iron 40x 40x6 mm post upto height of 8 feet above ground level and openable gate with locking arrangment including making provision for entry and exit of HT/LT cables and steps made to access to the top of plateform including plastering to bricks masonary complete including painting with 2 coats of whitewash on plastered surface and painting steel surface with 2 coats of red oxide primeretc complete all as specified and directed. 70 Supply & fix HT 11 KV, outdoor type gang operated air-break switch suitable for horizontal or vertical mounting rotating type complee with drop out fuse having 12 insulators of rating upto 200 Amps etc complete all as specified and directed. 71 Supply and fixing lightning arrestor HT 11 KV, 10 KA station class etc complete all as specified and directed. 72 Supply & errect 2 pole structure on 11 mtr PCC pole consisting of pole with anti-climbing device, PCC foundation & cross arms (Bracings) etc for one incoming and one out going. etc complete all as specified and directed. 73 Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station (CSS) ,315KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed System Integrators of approved OEM are not allowed to supply .Package substation will have the following equipment :- 74 HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of1 no. fixed motorized Vacuum Circuit Breaker Moduleand 2 nos. fixed morotized Load break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Vacuum Interrupter,RMU,LT Switchgear and CSS Enciosure shall be of same make to ensure life cycle optimization.(i)Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint)(ii)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder.(iii)SF6 Gas pressure indicator.(iv)Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO(v)Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 3 Nos 75 (vi)All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 SetTRANSFORMER315 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 955W and Max Losses @ 100% Load 2750 KW and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be conforming to IS: 2026 and IS: 1180(part-I). amended up to date. (i)01 No. Winding Temperature Indicator with Alarm and trip Contact.LT PANELLVS PANEL 500 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. ; LT panel made up of 1.5/2 mm thick CRCA sheet INCOMER CUM OUTGOINGS FROM TRANSFORMER(i)500 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB)(ii) Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 set 76 (iii)Hard wiring from each equipment inside CSS for scada connectivity (monitoring & control)to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. (iv)All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work.OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robust. 77 construction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meterand CSS Enciosure shall be of same make to ensure life cycle optimization. 78 Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station , (CSS) 400KVA made from G. I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation CSS shall be from OEMs only . Licensed System Integrators of approved OEM are not allowed to supply.Package substation will have the following equipment :-HT SWITCHGEAR11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of1 no. fixed motorized Vacuum Circuit Breaker Moduleand 2 nos. fixed morotized Load break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the 79 RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.Vacuum Interrupter,RMU,LT Switchgear and CSS Enciosure shall be of same make to ensure life cycle optimization.(i)Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil (Modbus RS485 complaint)(ii)Capacitive voltage indication fixed type system with LED for all feeder and FPI in all load break switch feeder.(iii)SF6 Gas pressure indicator.(iv)Operating sequence of VCB must be O-0.3Sec-CO-3 Mins-CO(v)Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 3 Nos.(vi)All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 Set 80 TRANSFORMER400 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-2 transformer (BEE Star Rated-2) with corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 1150W and Max Losses @ 100% Load 3330 KW and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be confirming to IS: 2026 and IS: 1180(part-I). amended up to date. (i)01 No. Winding Temperature Indicator with Alarm and trip Contact.LT PANELLVS PANEL 630 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. ; LT panel made up of 1.5/2 mm thick CRCA sheet INCOMER CUM OUTGOINGS FROM TRANSFORMER(i)630 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB) (ii) Multifunction meter with Modbus RS485 port & class 0.5 accuracy with Suitable CT. - 1 set 81 (iii)Hard wiring from each equipment inside CSS for scada connectivity (monitoring & control)to be brought to one set of TBs and a space for FRTU to be given. Supply of FRTU is not in scope. (iv)All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work.OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robustconstruction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment.Vacuum Interrupter,RMU,LT Switchgear, Multifunction meterand CSS Enciosure shall be of same make to ensure life cycle optimization. 82 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge(Panel 1 - Near mains transformer GTC Area):- 83 INCOMING :-(i) S&F ACB 4 Pole 630 amps ,415 Volt electrical drawout type of breaking capacity not less than50 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 750 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBsOUTGOING:-(i) S&F MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 No (for LT distribution panels of block )(ii) S&F MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) -02 Nos(for LTP Pump Motor, lift, fire fighting, stree light etc + spare).(iii)Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(ivDigital volt meter 0-400 V with selector switch - 01 No.(v)LED Indicating Lamps R,Y,B - 01 Set of three 84 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 2 - Near Chambal Vihar Main Tfr Panel):-INCOMING :-(a) S&F MCCB 4 Pole 500 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(b) Aluminium electrolite Busbar 600 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 85 OUTGOING:-(i) S&F MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 No (for LT distribution panels of blocks)(ii) S&F MCCB 4 Pole 160 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0) -02 Nos(for LTP Pump Motor, lift, fire fighting, stree light etc + spare).(iii)Street light timer using Power contactor 32 Amps, (1-NO) 3 pole, 415Volt, DIN Type digital programable time switch 230V AC, Auto/Manual selector switch, MCB 4 pole 25 Amps C-range, ON/OFF indicator all prewired and making provision for fixing outgoing cables- 01 Set complete.(iv)Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(v)Digital volt meter 0-400 V with selector switch - 01 No.(vi)LED Indicating Lamps R,Y,B - 01 Set of three 86 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 1A - LT PANEL FOR 3 X BLOCKS GTC):-INCOMING :-(i) S&F MCCB 4 Pole 315 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 400 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 87 OUTGOING:-(i) S&F MCCB 4 Pole 125 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 04 No (for 3 X Blocks+spare)(ii) Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(iii)Digital volt meter 0-400 V with selector switch - 01 No.(iv)LED Indicating Lamps R,Y,B - 01 Set of three 88 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 2A - LT PANEL FOR 2 X BLOCKS CHAMBAL VIHAR):-INCOMING :-(i) S&F MCCB 4 Pole 250 amps ,415 Volt of breaking capacity not less than36 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 01 Nos Incommer.(ii) Aluminium electrolite Busbar 400 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs 89 OUTGOING:-(i) S&F MCCB 4 Pole 125 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range (Optium 2.0) - 03 No (for 3 X Blocks+spare)(ii) Digital Ammeter 0-500 A with selector switch & CTs of suitable capacity - 01 set.(iii)Digital volt meter 0-400 V with selector switch - 01 No.(iv)LED Indicating Lamps R,Y,B - 01 Set of three 90 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel 1B & 2B):-INCOMING :-(i) S&F MCCB 4 Pole 200 amps ,415 Volt of breaking capacity not less than25 KA (Ics=100 % of Icu) with Adjustable TM Range-01 No incoming.(ii) Aluminium Electrolite Busbar 300Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set 91 OUTGOING:-(i) MCCB 4 pole 63 Amp, 415 V, 16 KA, C-series. - 01 Nos (for PH Panel)(ii) MCCB 4 pole 40 Amp, 415 V, 16 KA, C-series- 02 Nos (sewage PH +spare).(iii) MCB TPN 25Amp, 230 V, 10 KA, C-series - 07 Nos (Lifts+fire fighting+Street lights)(iv)Street light timer using Power contactor 25 Amps, (1-NO) 3 pole, 415Volt, DIN Type digital programable time switch 230V AC, Auto/Manual selector switch, MCB 4 pole 25 Amps C-range, ON/OFF indicator all prewired and making provision for fixing outgoing cables- 01 Set complete.(v) Digital Ammeter 0-150 A with selector switch & CTs of suitable capacity - 01 set.(vi) Digital volt meter 0-500 V with selector switch - 01 No. (vii) On load Change over switch 4 pole of current raring 63-100 A (open execution type) - 01 No.(viii)LED Indicating Lamps R,Y,B - 01 Set of three 92 Supply, installations, testing and commissioning factory made out door cubical typeLT panel board dust and verminproof , free standing, floor mounting type mounted on and incluidng1:3:6 PCC foundation as requried at site and of fabricated by 3.0mm thick CRCA Sheet over MS 50 X 50 x 6 mm thick angle iron frameof requriedtype for support with double door both sides open type with necessarylockingarrangement with sloppedroof on top duly paintedwith two coatsof powder coated semense gray paint complete and having separatedoors inside for accomodatingall incomming / outgoing feeders of suitable sizes all as specified and directedby Engr-in- Charge:- (Panel D - DOE Area):-INCOMING :-(i) S&F MCCB 4 Pole 100 amps ,415 Volt of breaking capacity not less than16 KA (Ics=100 % of Icu) with adjustable thermal Setting (Optium 2.0)-01 No incoming.(ii) Aluminium Electrolite Busbar 150 Amps current rating duly sleev insulated for set of 3 phase, 4 wire system and branch connection of suitable size of outgoing current rating of MCB/MCCBs-01Set 93 OUTGOING:-(i) MCCB 4 pole 63 Amp, 415 V, 16 KA, C-series - 02 Nos (for Bldg + Spare)(ii) MCB SPN 10 Amp, 415 V, 10 KA, C-series - 02 Nos (Garages + Spare).(iii) MCB SPN 10 Amp, 230 V, 10 KA, C-series - 02 Nos (Security light + Spare)(iv) Digital Ammeter 0-150 A with selector switch & CTs of suitable capacity - 01 set.(v) Digital volt meter 0-500 V with selector switch - 01 No.(vi)LED Indicating Lamps R,Y,B - 01 Set of three 94 M&L for factory made busbar box 750 Amps rated Aluminium busbar, 3 phase, 4 wire, 415 Volt of size not less than 300mm x 200mm x 100mm, fabricated using 1.6mm MS sheet, duly painted with smoke gray powder coated over a coat of red oxide primer suitable for fixing on wal by using wall fastners 10mm dia and making necessary incomming and outgoing connection of electric cables using aluminium lugs etc complete all as specified and diected. 95 M&L for factory made busbar box 600 Amps rated Aluminium busbar, 1 phase, 245 Volt, size not less than 200mm x 150mm x 100mm, fabricated using 1.6mm MS sheet, duly painted with smoke gray powder coated over a coat of red oxide primer suitable for fixing on wall by using wall fastners 10mm dia and making necessary incomming and outgoing connection of electric cables using aluminium lugs etc complete all as specified and diected. 96 Supply and fixing poly carbonatejunction box , weather and vermin proof of size 250X250X160 including provn of 4 Nos aluminium strip 25x3.15 mm size bus bar single phase and neutral suitabely mounted on bus bar insulators ,including one No. MCB SP 6 Amps for light control,drilling of holes.Provn of suitable size of GI nuts, bolts, double washer and FI clamps ofsuitable sizefor taking connections and fixing on LT steel tubular poles complete with locking arrangementcomplete all as specified and directed. 97 Supply and connecting three core cord flexible wire, copper conductor multistranded, PVC insulated and overall PVC sheathed of size 1.5Sqmm 1100 Volt , draw through LT steel tubular polesfor connection to street light from junction boxetc complete all as specified & directed. 98 S&F for Cable route indicator, duly engraved with LT CABLE 1100 VOLT on cast iron round plate 150 mm dia with provision of 500 mm long (minimum) single leg/stand of flat iron 40 x 5 mm, welded/riveted on back side of plate, fixed and grouted in position with PCC 1:3:6 type C-1, block of suitable size etc complete all as specified & directed. 99 M&L for Precast PCC (1:2:4) type B-1 cable path indicators of size 300x100x500mm rounded top having engraved in capital letters HT Cable embedded in position in PCC(1:3:6) Type C-1, using necessary formwork and including provision of two coats of cement base paint on exposed concrete surface and writing HT Cable in black synthetic enamel paint etc complete all as specified & directed. 100 M&L fordecorative LED post top lantern (PTL) luminior with die cast aluminium spigot, spun aluminium powder coated top cover clear/opal acralic difusser LED light fitting of 25 watts including LED lamp etc complete all as specified & directed. 101 M& L for shifting of 33 KV HT cable to a safe distance from proposed building, supply, laying, testing & commisioning of 33 KV cable in replacement with new as per estimate provided by State electricity deptetc etc complete all as specified & directed. 102 FIRE FIGHTINGS&F forAutomatic air release valve 50mm dia suitable for domestic water with 25mm gun metal stop valveetc complete all as specified & directed. 103 S&F forbranch pipe with nozzle of 20mm dia for hose reel conforming to IS 8090etc complete all as specified and directed. 104 S&F forfix Valve, stop, screwed, 25 mmdia pipeetc complete all as specified and directed. 105 S&F for6 kg capacity Multipurpose dry chemical powder (ABC) type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/charged .etc complete all as specified and directed. 106 S&F forCO2 type fire extinguisher of 3 Kgs capacity with steel cylinder with a discharge valve and confirming to IS : 15683.Extinguisher shall be painted with red enamel apint and fixed to wall with bracket etc complete all as specified and directed. 107 S&F for9 Ltr capacity Foam type(IS-15683) fire extinguishers consisting of welded MS cylindrical body fabricated from 1.6 mm MS sheet internally protected with anticorrosive treatment and hydraucally tested. Extinguisher externally painted with red enamel and fixed to wall with bracket complete with initial filled/chargedetc complete all as specified and directed. 108 S&F fortesting of Star-Delta starter Panel for fire fighting pump motor etc complete all as specified and directed. 109 Supply, installation, testing & commissioning ofFIRE SIGNAGES for indication/information of fire exit, alarm panel, fire extinguishers fire axe, hose reel, hydrents, lifts of size 300mmx100mm etc complete all as specified and directed. 110 DG SETSSupply, installation, commissioning and testing complete of Manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 180 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following :- 111 (A) Engine (prime mover) : Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, rediator and all standard fittings/fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter (12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. (B) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class H; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1% voltage regulation, coupled directly/suitably to and to match the above engine and conforming to BS 5000/IS 4722. 112 (C) Dunlop Metallastik anti-vibration of pads for mounting engine - alternator assembly on the base frame/plate.(D) Base plate : Made out of structural steel as per manufacturers recommended design/specifications.(E) Enclosure : Provision of an integral type, approved/certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 - 7 degree celsius, It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window.(i)Silencer : Absorption type, non-resistance, residential.(ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings.(iii)Fuel tank to be provided as per OEM specificaton.(iv)Safeties for high enclosure temperature and emergency shut-down from outside.(v) 1No 12V of suitable AH lead acid batteries and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design/specifications.(F) Control panel : Control panel made out of 14 gauge CRCA sheet, powder coated and shall consists of the following: - 113 (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals.(iii) Indicating lamps for load on and set running (iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protections. Note: To be mounted inside enclosure. (G) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitable for outdoor installation (including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:- 114 AC voltmeter - 01NoVoltmeter selector switch OFF/RY/YB/BR - 01NoFrequency meter - 01NoAC voltmeter of suitable scale - 01NoAmmeter selector switch OFF/R/Y/B - 01NoCurrent transformers of suitable ratio - 01NoBattery charger consisting of - 01No(aa) Transformer / Rectifier unit (bb) DC ammeter /DC voltmeter(cc) Charging rate selector switch OFF/Trickle/BoostMains supply air break contactor, 3 pole of suitable raing - 01NoAlternator air break contactor, 3 pole of suitable rating and provided with a separate overload relay for overload protection - 01NoMains supply voltage monitor - 01NoSet of DC control relays and timers - 01NoSet of push buttons, START, STOP, ACKNOWLEDGE, RESET, MAINS BREAKER, CLOSE/TRIP, ALTERNATOR BREAKER CLOSE / TRIP - 01No 115 01 Set of indicating lamps for the following :-LOAD ON MAINS, LOAD ON SET, SET FAILS TO START, LOW OIL PRESSURE, HIGH TEMPERATURE ALARM, HIGH TEMPERATURE TRIP, ALTERNATOR OVERLOAD.Audio - alarm hooter - 01NoKWH meter - One Set of Bus bars - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.KW meter - 01Noset of bus bar - 01NoThe control cubical will be furnished complete with the necessary control circuit fuse etc and will have provision for making incoming and outgoing connectionsOne - set of bus bar - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. 116 (ii) Platform : PCC foundation /plinth/baseshall be provided as per drawing No: TD/2010/109, Sheet No 1/1.(iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices. 117 Supply, installation, commissioning and testing complete of Manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Diesel Engine driven generating set capable of delivering 125 KVA continuous rating, (10% overload for 1 hour in 12 hours of operation), 415 volts (AC 3 phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled directly to a matching alternator, and mounted on Dunlop metallastik foundation pads on a common base frame and thereafter installed in the CPCB approved acoustic enclosure complete with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, flexible exhaust pipe complete all as specified and directed and shall include comprise of the following :- 118 (A) Diesel engine 1500 RPM, of suitable HP as recommended by manufacturer, water cooled, turbocharged, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, rediator and all standard fittings/fixtures as per standard manufacturing practices and including suitable instrument panel with RPM meter, lub oil temp and pressure gauge, water temp gauge and frequency meter (digital type), battery charging ammeter and fuses, and also including self starter (12V), battery charging alternator, fuel tank etc and complete with HWT and LLOP alarm and shut down safeties complete with first fill of Lub oil and Coolent. (B) Alternator : AC alternator, brushless, 415V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 63 KVA, PF 0.8 (lag), 1500 RPM insulation class H; enclosure SPDP (IP 22/23), self excited & self regulated with AVR for + 1% voltage regulation, coupled directly/suitably to and to match the above engine and conforming to BS 5000/IS 4722. (C)Dunlop Metallastik anti-vibration of pads for mounting engine - alternator assembly on the base frame/plate. 119 (D) Base plate : Made out of structural steel as per manufacturers recommended design/specifications.(E) Enclosure : Provision of an integral type, approved/certified acoustic enclosure as per latest CPCB norms, for the DG set to restrict the noise level to 75 DB (A) at one metre and ensure that temperature rise within the canopy shall not exceed 5 - 7 degree celsius, It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and high quality noise absorbent and fire retardant grade acuoustic insulation material duly provided with EPDN gasket lining. There shall be four hinged doors out of which one shall be with a glass window.(i)Silencer : Absorption type, non-resistance, residential.(ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and suitable light fittings.(iii)Fuel tank to be provided as per OEM specificaton.(iv)Safeties for high enclosure temperature and emergency shut-down from outside.(v) 1Nos 12V of suitable AH lead acid batteries and adequate size copper conductor cable leads, housed on & including suitable size MS angle iron frame and necessary clamps, nuts, bolts, washers all as required & as per manufacturer design/specifications. 120 (F) Control panel : Control panel made out of 14 gauge CRCA sheet, powder coated and shall consists of the following: - (i) Ps 0500 Controller (ii) Aluminium Bus bars with suitable capacity incoming & outgoing terminals.(iii) Indicating lamps for load on and set running(iv) Instrument fuses duly wired and ferruled. (v) Circuit breaker(MCCB) of suitable rating with overload and short circuit protections. Note: To be mounted inside enclosure. (G) Automatic mains failure (AMF) control panel fabricated from CRCA sheet steel of thickness not less than 3.15 mm, suitable for outdoor installation (including CPRI type test certified), dust & vermin proof, protection class I P-54 suitable for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system with adequate layers of power coating floor mounting type with front opening, the AMF panel shall comprise the following indicating instruments & switches:- AC voltmeter -01 NoVoltmeter selector switch OFF/RY/YB/BR - 01 No 121 Frequency meter - 01 NoAC voltmeter of suitable scale - 01 NoAmmeter selector switch OFF/R/Y/B - 01 NoCurrent transformers of suitable ratio - 01 NoBattery charger consisting of - 01 No(aa) Transformer / Rectifier unit (bb) DC ammeter /DC voltmeter(cc) Charging rate selector switch OFF/Trickle/BoostMains supply air break contactor, 3 pole of suitable raing - 01 NoAlternator air break contactor, 3 pole of suitable rating and provided with a separate overload relay for overload protection - 01 NoMains supply voltage monitor - 01 NoSet of DC control relays and timers - 01 NoSet of push buttons, START, STOP, ACKNOWLEDGE, RESET, MAINS BREAKER, CLOSE/TRIP, ALTERNATOR BREAKER CLOSE / TRIP - 01 No01 Set of indicating lamps for the following :-LOAD ON MAINS, LOAD ON SET, SET FAILS TO START, LOW OIL PRESSURE, HIGH TEMPERATURE ALARM, HIGH TEMPERATURE TRIP, ALTERNATOR OVERLOAD.Audio - alarm hooter - 01NoKWH meter - One Set of Bus bars - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections. 122 KW meter - 01Noset of bus bar - 01NoThe control cubical will be furnished complete with the necessary control circuit fuse etc and will have provision for making incoming and outgoing connectionsOne - set of bus bar - 01NoThe control cubicle will be furnished complete with the necessary control circuit fuses, etc. and will have provisions for making incoming and outgoing connections.Note :(i) In case AMF panel included instead of Standard Control Panel, then Battery charging alternator with inbuilt regulator and battery charging ammeter should be deleted from engine specifications since Battery charger included under AMF Panel specifications. 123 (ii) Platform : PCC foundation /plinth/baseshall be provided as per drawing No: TD/2010/109, Sheet No 1/1.(iii) Tool kit, Operation and Maintenance catalogue, 1 year spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices. 124 Supply, installations, testing of electric chimney of size 60cm havingsuction capacity of 1200 cum per hour with filterless technology sealed motor and insulationfor oil deposit and water vapour alongwith self autoclean feature after 30 cycles of operation and minimum 5 year warranty etc etc complete all as specified and directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
25.
Public Administrative Department #11281313 AOC
Tender For Supply Of Street Lighting Fixtures And Fittings Required For The Year 2026-2027 To Sivagiri Town Panchayat, 4 Feet Flourescent Tube Light , 40W Copper Choke , 40W Tube Light Starter , 36W / 40W Tubelight Electronic Choke , Tube Light Side Lock Holder , Insluation Gum Tape Roll - Isi , 1.5 Sq.Mm Wire [ Flex ] , 2.5 Sq.Mm Wire [ Flex ] , 4 Sq.Mm Wire [ Flex ] , 6 Sq.Mm Wire [ Flex ] , 1/18 Vir Copper Wire 1.5Sq.M , 3/20 Cts Copper Wire 4 Sq.M , 7/20 Cts Copper Wire 6 Sq.M , 1.5 Sq.Mm 3 Core Copper Cable , 2.5 Sq.Mm 3 Core Copper Cable , 4 Sq.Mm 3 Core Copper Cable , 6 Sq.Mm 3 Core Copper Cable , 10 Sq.Mm 3 Core Copper Cable , 16 Sq.Mm 3 Core Copper Cable , 6Amps To 32 Amps Sp Mcb , 40Amps 2Pole Isolator , 63Amps 4Pole Isolator , 16A Dp Switch , 32A D.P Switch , Sheet Sheal Enclosure For Mcb (4Pole) , Fuse Unit 16 Amps 240V , Fuse Unit 32 Amps 415V , Fuse Unit 63 Amps 415V , Fuse Unit 100 Amps 415V (Heavy Duty) , Fuse Unit 200 Amps 415V (Heavy Duty) , Main Switches Tpn 16 Amps , Main Switches Tpn 32 Amps , 63A 4Pmc Changeover Switch , 100A 4Pmc Changeover Switch , Main Switches Tpn 200 Amps , Electronic 7 Days 24 Hrs Programable Ditial Timer Clock , 63 Amps 4 Pole Contact With Coil , 9W Led Bulb Two Pin Holder Model , 15W Led Bulb Two Pin Holder Model , 48 Ceiling Fan With All Accessories , D.O.L Motor Starter Up-To 5 Hp , 1Hp Motor Single Phase Banel Board , 1.5Hp Motor Single Phase Banel Board , 2Hp Motor Single Phase Banel Board , 7.5Hp Three Phase Control Panel With Contactor, Relay, Auto-Start Preventor, Volt Meter, Amps Meter, Etc.. Complete In A Suitable Powder Coated Enclosure. , 10 Hp Three Phase Fasd - Auto-Start / Dry Run Protection Control Panel With Contactor, Relay, Auto-Start Preventor, Volt Meter, Amps Meter, Etc.. Complete In A Suitable Powder Coated Enclosure. , 12.5 Hp Three Phase Fasd - Auto-Start / Dry Run Protection Control Panel With Contactor, Relay, Auto-Start Preventor, Volt Meter, Amps Meter, Etc.. Complete In A Suitable Powder Coated Enclosure. , 15 Hp Three Phase Fasd - Auto-Start / Dry Run Protection Control Panel With Contactor, Relay, Auto-Start Preventor, Volt Meter, Amps Meter, Etc.. Complete In A Suitable Powder Coated Enclosure. , 20 Hp Three Phase Fasd - Auto-Start / Dry Run Protection Control Panel With Contactor, Relay, Auto-Start Preventor, Volt Meter, Amps Meter, Etc.. Complete In A Suitable Powder Coated Enclosure. , 50Mfd Condensor , 100 X 120 Mfd Condensor , 10 Mfd Condensor , 0 To 32A Amps Meter , 0 To 500V Volt Meter , 3/20 Aluminium Wire , 7/20 Aluminium Wire , 40Amps Contactor Switch , 23Amps Contactor Switch , 32Amps Contactor Switch , Street Light Champ Set With Pipe , Street Light Switch Box With Service Pipe , Electric Cutting Plyer , Electric Testor , Elertrician Safty Gloves , Screw Driver , 20 W Pvc Tube Light
Contract Date: Jun 13, 2026 Contract Value : 1.17 Lakh
Local Bodies No of Bidders 2
26.
Educational and Research Institute #11278199 Technical Bid
Tender for Supply Of Electrical Materials To The Building Store, Mgims/Khs, Sevagram. , Bus Bar 32Amp 415V, Ma+B8:B12ke -Ashok (Aluminium) , Bus Bar 63Amp 415V, Make-Ashok (Aluminium) , Bus Bar 100Amp 415V, Make- Ashok (Aluminium) , Bus Bar 200Amp 415V, Make- Ashok (Aluminium) , Bus Bar 300Amp 415V, Make- Ashok (Aluminium) , Bus Bar 400Amp 415V, Make- Ashok (Aluminium) , Coil 1.5 Kw Kettle Element (Panja Coil)1500W Make-Ramson , Coil 2 Kw Kettle Element Make-Ramson , Coil Cup Midset Heating Elements 3000W 230V 50Hz Ac Isi Mark , Coil Triangular Tsp Heating Elements 2000W 230V 50Hz Ac Isi Mark , Thermostat Geyser 7 Inch Isi , Thermostat Geyser Cut Out 7 Inch Isi , Contactor Mnx-250, 3 Pole ,Make-L&T , C.I. Plate 2Ft X 2Ft X 5Mm For Earthing Isi , Domestic Gang Box 1 Way, Make Anchor Cat. No. 7305 , Domestic Gang Box 2 Way, Make Anchor Cat. No. 7112 , Surface Modelling Gang Box 1 Way, Make- Anchor Cat No. 7010 , Earthing Powder 20 Kg Bag Isi , Halogen Tube 500W, Local , Halogen Tube 1000W,Local , Halogen Holder Local , Pvc Elbow 19Mm, Make Superflast , Pvc Elbow 25Mm, Make Superflast , Pvc Tee 19Mm, Make- Superflast , Pvc Tee 25Mm, Make- Superflast , Rocor Switch 6A Isi , Wire Cutter Taparia , Winding Sleeve 1 No Isi , Winding Sleeve 2 No Isi , Winding Sleeve 3 No Isi , Winding Sleave 4 No Isi , Winding Sleave 5 No Isi , Winding Sleeve 6 No Isi , Winding Sleeve 7 No Isi , Winding Sleeve 8 No Isi , Led Street Light 220W -Cat No Lr02-262-Xxx-57-Xx, Make-Wipro , Led Street Light 250W -Cat No Lr02-292-Xxx-57-Xx, Make-Wipro , Led Flood Light 250W -Cat No. Lf20-342-060-57-Xx, Make-Wipro , 3Core Flat Cable Submersible,16 Sq.Mm., Make-Finolex , 3Core Flat Cable Submersible , 25.Sq.Mm., Make-Finolex , 3.5Cx25sq.Mm. Cu Armoured Cable, Make- Polycab , Led Torch Rechargable 3 W Cord Cat- Cl0004, Make- Wipro , Cable Cord 3 Mtr. Long , Tds Meter - Ro Water Checking Make Wellon , Geyser 25 Litre White Colour Make Havells , Aluminum Lugs 10 Sq. Mm. (U-Type-Heavy) , Aluminum Lugs 16 Sq. Mm (U-Type-Heavy) , Aluminum Lugs 25 Sq. Mm (U-Type-Heavy) , Aluminum Lugs 35 Sq. Mm (U-Type-Heavy) , Aluminum Lugs 50 Sq. Mm (U-Type-Heavy) , Aluminum Lugs 70 Sq. Mm (U-Type-Heavy) , Aluminum Lugs 95 Sq. Mm (U-Type-Heavy) , Aluminum Lugs 120 Sq. Mm (U-Type-Heavy) , Aluminum Lugs 150 Sq. Mm (U-Type-Heavy) , Aluminum Lugs 240 Sq. Mm (U-Type-Heavy) , Aluminum Lugs 300 Sq. Mm (U-Type-Heavy) , Battery Lugs Brass Isi , Battery Lugs 14 Sq. Mm Isi , Battery Lugs B/R Sq. Mm Isi , Battery Lugs special repair Sq. Mm Isi , annual periodical maintenance Meter 0 To 30A 4 (Analogue/Digital) , annual periodical maintenance Meter 0 To 60A 4 (Analogue/Digital) , Bulb 15W (Zero), Make- Wipro , Blade Cooler Fan Metal 24 , Coil Cup Midset Heating Elements 3000W 230V 50Hz Ac Isi Mark , Coil Triangular Tsp Heating Elements 2000W 230V 50Hz Ac Isi Mark , Thermostat Geyser 8 Inch Isi , Thermostat Geyser Cut Out 8 Inch Isi , Coil Heater Element (1500 W) Isi , Contactor Mnx-63, 3 Pole ,Make-L&T , Contactor Mnx-100, 3 Pole ,Make-L&T , Contactor Mnx-125, 3 Pole ,Make-L&T , Contactor Mnx-18, 4 Pole ,Make-L&T , Contactor Mnx-32, 4 Pole ,Make-L&T , Contactor Mnx- 40, 4 Pole ,Make-L&T , Contactor Mnx-63, 4 Pole ,Make-L&T , Contactor Mnx-100, 4 Pole ,Make-L&T , Contactor Mnx-125, 4 Pole ,Make-L&T , Contactor Mnx-250, 4 Pole ,Make-L&T , Contactor Mnx- 25, Make-L&T , Contactor Mnx- 40, Make-L&T , Contactor Mnx- 41, Make-L&T , Contactor Kit Complete Mnx- 40, Make-L&T , Contactor Kit Complete Mnx- 41, Make-L&T , Copper Lugs 20 Sq. Mm (Ring Type-Heavy) , Copper Lugs 10 Sq. Mm (Utype-Heavy) , Copper Lugs 20 Sq. Mm (Utype-Heavy) , Copper Lugs 16 Sq. Mm (Utype-Heavy) , Copper Lugs 25 Sq. Mm (Utype-Heavy) , Copper Lugs 35 Sq. Mm (Utype-Heavy) , Copper Lugs 4 Sq. Mm (Utype-Heavy) , Copper Lugs 6 Sq. Mm (Utype-Heavy) , Copper Lugs 50 Sq.Mm (Utype-Heavy) , Copper Lugs 20 Sq. Mm (Pintype-Heavy) , Contactor 40A ,Make-L&T , Clamp Bush 15 Inch For Exhaust Fan Isi , Clamp Bush 18 Inch For Exhaust Fan Isi , Clamp Bush 24 Inch For Exhaust Fan Isi , Igniter S.V,.Make-Dolor , Mccb 3 Pole, 800A ,Make-L & T Dn3b , Mccb 4 Pole, 100A, 10 Ka, Cat. No. 98557, Make- L & T , Mccb 4 Pole 125A, 10 Ka, Cat. No. 98558, Make- L & T , Mccb Box 4 Way W/O B1, Cat No. 98669, Make - L & T , Mccb Box 6 Way W/O B1, Cat No. 98670, Make - L & T , Mccb Box 8 Way W/O B1, Cat No. 98671, Make - L & T , Mccb Box 12 Way W/O B1, Cat No. 98672, Make - L & T , Mccb 4 Pole, 800A ,Make-L & T Dn3b , Mccb Box 12 Way, Make L&T , Rotary Operating Handle (Dn3), Make L&T , Neutral Link , Over Load Relay 6 To 10 annual periodical maintenance Ml0 To Ml3, Make- L & T , Over Load Relay 13 To 22 annual periodical maintenance Ml0 To Ml3, Make- L & T , Over Load Relay 13 To 22 annual periodical maintenance Mni To Mns, Make-L & T , Over Load Relay 9 To 15 Amp, Ml0 To Mns, Make-L & T , Over Load Relay 9 To 15 Amp, Mn 1 To Mns, Make-L & T , Over Load Relay 14 To 23 Amp, Mn 1 To Mns, Make-L & T , Over Load Relay 20 To 33 Amp, Mn 1 To Mns, Make-L & T , Over Load Relay 30 To 50 Amp, Mn 1 To Mns, Make-L & T , Over Load Relay 45 To 75 Amp, Mn 1 To Mns, Make-L & T , Pvc Saddle 19Mm, Make-Sagar , Pvc Saddle 25Mm, Make-Sagar , Pvc Casing Corner, Isi Mark , Preventer Single Phase Usp-3 Make Selec , Pole Box Steel, Cat No. :Gsjb-1414 , Size:170 X 170 X 105 Isi , Thermal Over Load Relay, Type: Mn2, Cat No. Ss94142oobo, 9 To 15 Amp, Make: L&T , Thermal Over Load Relay, Type: Mn2, Cat No. Ss94144oodo, 14 To 23 Amp, Make: L&T , Relay Base Mounted Square Type 5 Pin ,Male-L & T , Relay Base Mounted Square Type 8 Pin ,Male-L & T , Relay Base Mounted Square Type 11 Pin ,Male-L & T , Relay Base Mounted Round Type 5 Pin ,Male-L & T , Relay Base Mounted Round Type 8 Pin ,Male-L & T , Relay Base Mounted Round Type 11 Pin ,Male-L & T , Regulator Fan 48 Inch, Make- Anchor , Regulator Fan Electronic Step Box Type Make- Anchor , Stud Motor 4 Inch Long With Bolt , Digital Long Tester Clamp Meter 400A, Make - Fluke , Digital Clamp Meter, Model - 3600 (1000A), Make- Fluke , Timer, Make- Selec , Winding Wire Isi , Winding Insulation Liquid, Make-Dr.Beg , Led Bulkhead 12W - Cat No.Da11265 ,Make-Wipro , Led Bulkhead (Garnet) - Cat No.Da112065, 6500K Cool White Isi , Led Strip Light Natural White With Choke Driver, Make Wipro. , Led Driver, 3W, Make-Great White , Led Driver, 6W, Make-Great White , Led Driver, 8W, Make-Great White , Led Driver, 12W, Make-Great White , Led Driver, 18W, Make-Great White , Led Driver, 36W, Make-Great White , Led Driver, 45W, Make-Great White , Led Driver, 65W, Make-Great White , Telephone Cable 0.40Mm,5.00 Pair, 90M - Cat No.28473, Make- Anchor , Telephone Cable 0.40Mm ,6.00 Pair, 90M - Cat No. 28677, Make-Anchor , Telephone Cable 0.40Mm ,8.00 Pair, 90M - Cat No. 28484, Make-Anchor , Telephone Cable 0.40Mm, 10.00 Pair, 90M- Cat No. 28466, Make-Anchor , 2C X 8 Sq. Mm. Al Service Wire Isi, Make-Jvc , 3.5Cx4sq.Mm. Cu Armoured Cable, Make- Polycab , 3.5Cx6sq.Mm. Cu Armoured Cable, Make- Polycab , 3.5Cx10sq.Mm. Cu Armoured Cable, Make- Polycab , 3.5Cx16sq.Mm. Cu Armoured Cable, Make- Polycab , 1Cx25sq.Mm. Al Un Armoured Cable, Make- Polycab , 1Cx35sq.Mm. Al Un Armoured Cable, Make- Polycab , 1Cx50sq.Mm. Al Un Armoured Cable, Make- Polycab , 3.5Cx25sq.Mm. Al Un Armoured Cable, Make- Polycab , 3.5Cx35sq.Mm. Al Un Armoured Cable, Make- Polycab , 3.5Cx50sq.Mm. Al Un Armoured Cable, Make- Polycab , 4Cx6sq.Mm. Al Un Armoured Cable, Make- Polycab , 4Cx10sq.Mm. Al Un Armoured Cable, Make- Polycab , 4Cx16sq.Mm. Al Un Armoured Cable, Make- Polycab , 4Cx25sq.Mm. Al Un Armoured Cable, Make- Polycab , 4Cx35sq.Mm. Al Un Armoured Cable, Make- Polycab , 4Cx50sq.Mm. Al Un Armoured Cable, Make- Polycab , 1Cx25sq.Mm. Cu Un Armoured Cable, Make- Polycab , 1Cx35sq.Mm. Cu Un Armoured Cable, Make- Polycab , 1Cx50sq.Mm. Cu Un Armoured Cable, Make- Polycab , 3.5Cx25sq.Mm. Cu Un Armoured Cable, Make- Polycab , 3.5Cx35sq.Mm. Cu Un Armoured Cable, Make- Polycab , 3.5Cx50sq.Mm. Cu Un Armoured Cable, Make- Polycab , 4Cx6sq.Mm. Cu Un Armoured Cable, Make- Polycab , 4Cx10sq.Mm.Cul Un Armoured Cable, Make- Polycab , 4Cx16sq.Mm. Cu Un Armoured Cable, Make- Polycab , 4Cx25sq.Mm. Cu Un Armoured Cable, Make- Polycab , 4Cx35sq.Mm. Cu Un Armoured Cable, Make- Polycab , 4Cx50sq.Mm. Cu Un Armoured Cable, Make- Polycab , Cable Cord 3 Core 10 Mtr Make- Polycab , Battery Terminal Brass Type Isi , Electric Hand Gloves Rubber Isi Mark , Electric Rubber Mat 10 Mm Thick 3X4 Ft, 11 Kv, Isi , Pvc Electrical Board 4 X 4 Inch Isi , Pvc Electrical Board 4 X 7 Inch Isi , Pvc Electrical Board 6 X 8 Inch Isi , Pvc Electrical Board 8 X 10 Inch Isi , Pvc Electrical Board 10 X 12 Inch Isi , Pvc Electrical Board 12 X 15 Inch Isi , Mccb 4 Pole 100 annual periodical maintenance Make L & T , Ducting Cooler Tank Metallic 5 Ft Size 4 Ft X 4 Ft X 8 Inch (G.I. Coated) , Pvc Cooler Water Tank 5 Ft Of Size 4 Ft X 4 Ft X 8 Inch , Ducting Cooler Pvc Elbow ½ Inch , Ducting Cooler Pvc Tee ½ Inch , Ducting Cooler Pvc 3 Way Junction Box , Cooler Water Output Connector , Cooler Water Returned Connector , Cooler Tank 4 Ft , Cooler Tank 5 Ft , Domestic Gang Box , Multimeter Make Fluke , Panel Lock Pin Type , Hygrometer Distilled Water Testing Make Isi , Honey Comb Pad 4 Inch (100Mm) (Cooler) , Cooler Tank Pvc Heavy , Metre Energy 30 A Single Phase Make- L & T , Hydrolic Crimping Tool =0.5 Sq Mm To 16 Sqmm Taparia , Hydrolic Crimping Tool =16 Sq Mm To 400 Sqmm Taparia , Lugs Pin Type 0.5 Sq. Mm Make Isi , Lugs U Type 1.00 Sq. Mm Make Isi , Lugs U Type 1.5 Sq. Mm Make Isi , Lugs U Type 2.5 Sq. Mm Make Isi , Lugs U Type 4.00 Sq. Mm Make Isi , Lugs U Type 6.00 Sq. Mm Make Isi , Lugs U Type 10.00 Sq. Mm Make Isi , Lugs U Type 16.00 Sq. Mm Make Isi , Lugs Ring Type 1.00 Sq. Mm Make Isi , Lugs Ring Type 1.5 Sq. Mm Make Isi , Lugs Ring Type 2.5 Sq. Mm Make Isi , Lugs Ring Type 4.0 Sq. Mm Make Isi , Lugs Ring Type 6.0 Sq. Mm Make Isi , Lugs Ring Type 10.0 Sq. Mm Make Isi , Lugs Ring Type 16.0 Sq. Mm Make Isi , Pvc Ducting Cooler 3 Way Make Isi , Pvc Ducting Cooler 4 Way Make Isi , Soldering Wire Roll 50 Gm , Soldering Iron Rod , Track Spot Light 12W Nw Dv Make Wipro , Surface Panel Light 22W-Nw Round Dv Make Wipro , Surface Panel Light 12W-Nw Round Dv Make Wipro , Surface Panel Light 30W-White Round Lb Make Wipro , Male Female Connector 1 Sq Mm 4 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 1 Sq Mm 3 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 1 Sq Mm 2 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 1.5 Sq Mm 4 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 1.5 Sq Mm 3 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 1.5 Sq Mm 2 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 2.5 Sq Mm 4 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 2.5 Sq Mm 3 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 2.5 Sq Mm 2 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 0.5 Sq Mm 4 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 0.5 Sq Mm 3 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 0.5 Sq Mm 2 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 4 Sq Mm 4 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 4.5 Sq Mm 3 Pin Dg Set (Ac Use) Phoenix , Male Female Connector 4 Sq Mm 2 Pin Dg Set (Ac Use) Phoenix , Aluminium Lugs U Type 0.5 Sq Mm Make Isi , Aluminium Lugs U Type 1 Sq Mm Make Isi , Aluminium Lugs U Type 1.5 Sq Mm Make Isi , Aluminium Lugs U Type 2.5 Sq Mm Make Isi , Aluminium Lugs U Type 4 Sq Mm Make Isi , Aluminium Lugs U Type 6 Sq Mm Make Isi , Aluminium Lugs Pin Type 0.5 Sq Mm Make Isi , Aluminium Lugs Pin Type 1 Sq Mm Make Isi , Aluminium Lugs Pin Type 1.5 Sq Mm Make Isi , Aluminium Lugs Pin Type 2.5 Sq Mm Make Isi , Aluminium Lugs Pin Type 4 Sq Mm Make Isi , Aluminium Lugs Pin Type 6 Sq Mm Make Isi , Aluminium Lugs Ring Type 0.5 Sq Mm Make Isi , Aluminium Lugs Ring Type 1 Sq Mm Make Isi , Aluminium Lugs Ring Type 1.5 Sq Mm Make Isi , Aluminium Lugs Ring Type 2.5 Sq Mm Make Isi , Aluminium Lugs Ring Type 4 Sq Mm Make Isi , Aluminium Lugs Ring Type 6 Sq Mm Make Isi , Copper Lugs U Type 0.5 Sq Mm Make Isi , Copper Lugs U Type 1 Sq Mm Make Isi , Copper Lugs U Type 1.5 Sq Mm Make Isi , Copper Lugs U Type 2.5 Sq Mm Make Isi , Copper Lugs U Type 4 Sq Mm Make Isi , Copper Lugs U Type 6 Sq Mm Make Isi , Copper Lugs Pin Type 0.5 Sq Mm Make Isi , Copper Lugs Pin Type 1 Sq Mm Make Isi , Copper Lugs Pin Type 1.5 Sq Mm Make Isi , Copper Lugs Pin Type 2.5 Sq Mm Make Isi , Copper Lugs Pin Type 4 Sq Mm Make Isi , Copper Lugs Pin Type 6 Sq Mm Make Isi , Copper Lugs Ring Type 0.5 Sq Mm Make Isi , Copper Lugs Ring Type 1 Sq Mm Make Isi , Copper Lugs Ring Type 1.5 Sq Mm Make Isi , Copper Lugs Ring Type 2.5 Sq Mm Make Isi , Copper Lugs Ring Type 4 Sq Mm Make Isi , Copper Lugs Ring Type 6 Sq Mm Make Isi , Appc Controller 8 Step Make Etasmart , Appc Controller 12 Step Make Etasmart , Appc Controller 16 Step Make Etasmart , Geyser Coil 2Kw (Cup Type) Ramsom , Single Phasing Preventor Make Gic , Relay With Base 1 Pin Round Make Sazzler , Relay With Base 5 Pin Round Make Sazzler , Relay With Base 8 Pin Round Make Sazzler , Relay With Base 1 Pin Square Make Sazzler , Relay With Base 8 Pin Square Make Sazzler , Relay With Base 11 Pin Square Make Sazzler , Dol Stortor Coil Make Isi , Contact Kit Dol Starters Make Isi , Multy Clamp Meter Make Fluke , Ss Combine Plate Box Pvc Make Isi , Cooler Box,1 Way Plastic , Cooler Box, 2 Way Plastic , Cooler Box, 3 Way Plastic , Mcb Box 1 / 2 Way Metallic, Make Anchor , Mcb Box 3 / 4 Way Metallic, Make Anchor , Mcb Box 5 / 6 Way Metallic, Make Anchor , Mcb Box 8 Way Metallic, Make Anchor , Mcb Box 1 / 2 Way Pvc , Mcb Box 4 Way Pvc , Mcb Box 6 Way Pvc , Spn - Uno D.Box, 6 Way ,Cat No.98301, Make-Havells , Spn - Uno D.Box, 8 Way, Cat No.98302, Make- Havells , Spn - Uno D.Box ,12 Way, Cat No.98303, Make- Havells , Spn - Uno D.Box, 16 Way, Cat No.98304, Make- Havells , Tpn - Uno D.Box,4 Way, Cat No.98305, Make- Havells , Tpn - Uno D.Box ,6 Way, Cat No.98306, Make- Havells , Tpn - Uno D.Box ,8 Way, Cat No.98307, Make- Havells , Tpn - Uno D.Box,12 Way, Cat No.98308, Make- Havells , Spn Acrylic ,6 Way, Cat No.98309,Make- Havells , Spn Acrylic ,8 Way, Cat No.98310,Make- Havells , Spn Acrylic ,12 Way, Cat No.98311,Make- Havells , Spn Acrylic ,16 Way, Cat No.98312,Make- Havells , Mcb Sp ‘C Uno, 6A, Cat No. 98001,Make- L & T , Mcb Sp ‘C Uno,10A, Cat No. 98002,Make- L & T , Mcb Sp ‘C Uno,16A, Cat No. 98003,Make- L & T , Mcb Sp ‘C Uno,20A, Cat No. 98004,Make- L & T , Mcb Sp ‘C Uno,25A, Cat No. 98005,Make- L & T , Mcb Sp ‘C Uno,32A, Cat No. 98006,Make- L & T , Mcb Sp ‘C Uno,40A, Cat No. 98007,Make- L & T , Mcb Sp ‘C Uno,63A, Cat No. 98008,Make- L & T , Mcb Dp ‘C Change Over Uno,40A, Cat No.37420, Make- L & T , Mcb Dp ‘C Uno,6A, Cat No.98017,Make- L & T , Mcb Dp ‘C Uno ,10A, Cat No.98018,Make- L & T , Mcb Dp ‘C Uno ,16A, Cat No.98019,Make- L & T , Mcb Dp ‘C Uno,20A, Cat No.98020,Make- L & T , Mcb Dp ‘C Uno ,25A, Cat No.98021,Make- L & T , Mcb Dp ‘C Uno ,32A, Cat No.98022,Make- L & T , Mcb Dp ‘C Uno ,40A, Cat No.98023,Make- L & T , Mcb Dp ‘C Uno,63A, Cat No.98024,Make- L & T , Mcb Tp ‘C Uno ,6A, Cat No.98025,Make- L & T , Mcb Tp ‘C Uno,10A, Cat No.98026,Make- L & T , Mcb Tp ‘C Uno ,16A, Cat No.98027,Make-- L & T , Mcb Tp ‘C Uno ,20A, Cat No.98028,Make- L & T , Mcb Tp ‘C Uno ,25A, Cat No.98029,Make- L & T , Mcb Tp ‘C Uno,32A, Cat No.98030,Make- L & T , Mcb Tp ‘C Uno ,40A, Cat No.98031,Make- L & T , Mcb Tp ‘C Uno,63A, Cat No.98032,,Make- L & T , Mcb Fp ‘C Uno ,6A, Cat No.98041,,Make- L & T , Mcb Fp ‘C Uno,10A, Cat No.98042,Make- L & T , Mcb Fp ‘C Uno ,16A, Cat No.98043,Make- L & T , Mcb Fp ‘C Uno ,20A, Cat No.98044,Make- L & T , Mcb Fp ‘C Uno,25A, Cat No.98045,Make- L & T , Mcb Fp ‘C Uno,32A, Cat No.98046,Make- L & T , Mcb Fp ‘C Uno ,40A, Cat No.98047,Make- L & T , Mcb Fp ‘C Uno ,63A, Cat No.98048,Make- L & T , Isolator Dp Uno,40A, Cat No.98055,Make- Havells , Isolator Dp Uno, 63A, Cat No.98056,Make- Havells , Isolator Fp Uno,40A, Cat No. 98063,Make- Havells , Isolator Fp Uno,63A, Cat No. 98064,Make- Havells , Isolator Fp Uno,100A, Cat No. 98099,Make- Havells , Isolator Fp Uno Cat No. 98100, 125A Make- Havells , Rccb Dp 25A 30Ma Cat No.98201, Make- Havells , Rccb Dp 25A 100Ma Cat No.98202, Make- Havells , Rccb Dp 25A 300Ma Cat No.98203, Make- Havells , Rccb Dp 40A 30Ma Cat No.98207, Make- Havells , Rccb Dp 40A 100Ma Cat No.98208, Make- Havells , Rccb Dp 40A 300Ma Cat No.98209, Make- Havells , Rccb Dp 63A 30Ma Cat No.98210, Make- Havells , Rccb Dp 63A 100Ma Cat No.98211, Make- Havells , Rccb Dp 63A 300Ma Cat No.98212, Make- Havells , Rccb Fp 25A 30Ma Cat No.98213, Make- Havells , Rccb Fp 25A 100Ma Cat No.98214, Make- Havells , Rccb Fp 25A 300Ma Cat No.98215, Make- Havells , Rccb Fp 40A 30Ma Cat No.98219, Make- Havells , Rccb Fp 40A 100Ma Cat No.98220, Make- Havells , Rccb Fp 40A 300Ma Cat No.98221, Make- Havells , Rccb Fp 63A 30Ma Cat No.98222, Make- Havells , Rccb Fp 63A 100Ma Cat No.98223, Make- Havells , Rccb Fp 63A 300Ma Cat No.98224, Make- Havells , Rccb Dp 80A 30Ma Cat No.98500, Make- Havells , Rccb Dp 80A 100Ma Cat No.98501, Make- Havells , Rccb Dp 100A 30Ma Cat No.98503, Make- Havells , Rccb Dp 100A 100Ma Cat No.98504, Make- Havells , Rccb Fp 80A 30Ma Cat No.98506, Make- Havells , Rccb Fp 80A 100Ma Cat No.98507, Make- Havells , Rccb Fp 100A 30Ma Cat No.98509, Make- Havells , Rccb Fp 100A 100Ma Cat No.98510, Make- Havells , Concealed Metal Box (20 Gauge) - Cat No. 21758,Make-Roma 18 Module , Surface Plastic Box 1 Or 2 Module Cat No. 21281, Make-Roma , Surface Plastic Box 3 Module Cat No. 20449, Make-Roma , Surface Plastic Box 4 Module Cat No. 21292, Make-Roma , Surface Plastic Box 6 Module Cat No. 30511, Make-Roma , Surface Plastic Box 8 Or 9 Module Horizontal Cat No. 30704, Make-Roma , Surface Plastic Boxes Cat No. 20450, Make-Roma 8 Module Rectangular , Surface Plastic Box 12 Module Cat No. 20347, Make-Roma , Surface Plastic Box 16 Module Cat No. 34567, Make-Roma , Bus Bar 32Amp 415V, Make -Ashok (Copper) , Bus Bar 63Amp 415V, Make-Ashok (Copper) , Bus Bar 100Amp 415V, Make- Ashok (Copper) , Bus Bar 200Amp 415V, Make- Ashok (Copper) , Bus Bar 300Amp 415V, Make- Ashok (Copper) , Bus Bar 400Amp 415V, Make- Ashok (Copper) , Blade Cooler Fan Plastic 12 , Blade Cooler Fan Plastic 15 , Blade Cooler Fan Metal 15 , Blade Cooler Fan Metal 18 , Copper Plate 1Ft X 1Ft X 3 Mm Isi , Copper Plate 1Ft X 1Ft X 5 Mm Isi , Contactor Mnx- 40, 3 Pole ,Make-L&T , Cable Clip 15Mm (100 No. In Each Pkt) , Fan Ceiling 36 Inch White, Make-Crompton , Fan Ceiling - 50W 240V, 50Hz 1200Mm, 48 Inch White, Make-Crompton , Fan Wall 12 Inch High Speed, 300Mm, Make-Crompton , Fan Wall 16 Inch High Speed, 400Mm, Make-Crompton , Fan Clean Air 9 Inch Crompton, 225Mm Make-Crompton , Fan Clean Air 12 Inch Crompton, 300Mm, Make-Crompton , Fan Rod 6 Ft Isi , Fan Rod 8 Ft Isi , Geyser 3 Litre, White Colour, Make Havells , Geyser 6 Litre, White Colour, Make Havells , Geyser 10 Litre, White Colour, Make Havells , Geyser 15 Litre, White Colour, Make Havells , Hrc Fuse 40 annual periodical maintenance Isi , Hrc Fuse 160 annual periodical maintenance Isi , Motor Semi Exhaust 9 Isi Copper, Make-Indo Asian , Motor Semi Exhaust 15 Isi Copper, Make-Indo Asian , Mod. Surface Box 18Mod (Pvc Sada) , Pvc Cooler Box 1 Way, Isi Mark , Pvc Cooler Box 2 Way, Isi Mark , Pvc Cooler Box 3 Way, Isi Mark , Pump Cooler Submersible Isi Mark 3 Ft,Make-Indo , Pump Cooler Submersible Isi Mark 4 Ft,Make-Indo , Pump Cooler Submersible Isi Mark 5 Ft,Make-Indo , Pump Cooler Submersible Isi Mark 7 Ft,Make-Indo , Led Flood Light, 10 Watt, Make- Wipro , Led Square Light Pop, 6 Watt, 3 Inch, Make-Wipro , Led Street Light 40W -Cat No.Lr02-451-Xxx-57-G1, Make-Wipro , Led Street Light 45W -Cat No.Lr02-501-Xxx-57-G1, Make-Wipro , Led Street Light 60W -Cat No.Lr02-671-Xxx-57-Xx, Make-Wipro , Led Street Light 70W -Cat No. Lr02-781-Xxx-57-Xx, Make-Wipro , Led Street Light 80W -Cat No Lr02-981-Xxx-57-Xx,Make-Wipro , Led Street Light 90W -Cat No Lr02-102-Xxx-57-Xx, Make-Wipro , Led Street Light 110W -Cat No Lr02-122-Xxx-57-Xx, Make-Wipro , Led Street Light 120W -Cat No Lr02-132-Xxx-57-Xx, Make-Wipro , Led Street Light 135W -Cat No Lr02-172-Xxx-57-Xx, Make-Wipro , Led Street Light 150W -Cat No Lr02-182-Xxx-57-Xx, Make-Wipro , Led Street Light 180W -Cat No Lr02-212-Xxx-57-Xx, Make-Wipro , Led Street Light 200W -Cat No Lr02-242-Xxx-57-Xx, Make-Wipro , Led Flood Light 120W -Cat No. Lf20-132-060-57-Xx, Make-Wipro , Led Flood Light 200W -Cat No. Lf20-272-060-57-Xx, Make-Wipro , Led Flood Light 20W Ip 65,(6000K)-Cat No.Pflm05206, Make- Wipro , Led Flood Light 30W Ip 65,(6000K)- Cat No.Pflm05306, Make- Wipro , Led Flood Light 50W Ip 65,(6000K)-Cat No.Pflm05506, Make- Wipro , Led Strip Type 5050 Voltage Dc, 12 V Make-Wipro , Led Strip Driver Cat No. H43520, 2 Amp, Make-Wipro , Led Strip Driver Cat No. H45040, 4 Amp, Make-Wipro , Led Strip Driver Cat No. H45060, 6 Amp, Make-Wipro , Wire 0.75Sq.Mm. 90M. - Cat No.27380, Make-Anchor , Wire 1.00Sq.Mm. 90M. - Cat No.27390, Make-Anchor , Wire 1.50Sq.Mm. 90M. - Cat No.27404, Make-Anchor , Wire 2.50Sq.Mm. 90M. - Cat No.27415, Make-Anchor , Wire 4.00Sq.Mm. 90M. - Cat No.27426, Make-Anchor , Wire 6.00Sq.Mm. 90M - Cat No.27437, Make-Anchor , Wire 10.00Sq.Mm.90M. - Cat No.27448, Make-Anchor , Wire 16.00Sq.Mm.90M. - Cat No.27459, Make-Anchor , Wire 25.00Sq.Mm.90M. - Cat No.27460, Make-Anchor , Wire 35.00Sq.Mm.90M. - Cat No.93256, Make-Anchor , Wire Fr-Lsh - 1 Sq.Mm 90M - Cat No. 27506, Make-Anchor , Wire Fr-Lsh - 1.5 Sq.Mm 90M - Cat No. 27517, Make-Anchor , Wire Fr-Lsh - 2.5 Sq.Mm 90M - Cat No. 27528, Make-Anchor , Wire Fr-Lsh - 4 Sq.Mm 90M - Cat No. 27539, Make-Anchor , Wire Fr-Lsh - 6 Sq.Mm 90M - Cat No. 27540, Make-Anchor , Wire Fr-Lsh - 10 Sq.Mm 90M - Cat No. 27550, Make-Anchor , Wire Fr-Lsh - 16 Sq.Mm 90M - Cat No. 27572, Make-Anchor , Multicore Flexible Cable 2C-Fr 100M, 4.00Mm - Cat No.93382Bk-1,Make-Anchor , Multicore Flexible Cable 2C-Fr 100M, 6.00Mm - Cat No.93385Bk-1,Make-Anchor , Cob Light 6 Watt, Make- Panasonic , Cob Light 12 Watt, Make- Panasonic , Garnet Cob Spotlight 12 Led, Wipro , Pendant Holder 6 annual periodical maintenance Local , Modular Surface Box 18 Modular, Make Roma , Led Round Light Pop 6 Watt 6 Inch, Make Wipro , Wood Wool Dry (Good Quality) , Cooler Water Tank Metallic 3 Ft Size 2.6 Inch X 2 Ft X 6Inch (G.I. Coated) , Cooler Water Tank Metallic 4 Ft Size 3 Ft X 2.6 Ft X 6 Inch (G.I. Coated) , Cooler Water Tank Metallic 5 Ft Size 3.6 Ft X 2.6 Ft X 6 Inch (G.I. Coated) , Cooler Tray 33 Inch X 23 Inch (G.I. Coated) , Pvc Cooler Water Tank 3 Ft Of Size 2.6 Inch X 2 Ft X 6 Inch , Pvc Cooler Water Tank 4 Ft Of Size 3 Ft X 2.6 Ft X 6 Inch , Pvc Cooler Water Tank 5 Ft Of Size 3.6 Ft X 2.6 Ft X 6 Inch , Cooler Body Iron 4 Ft Height Heavy , Cooler Body Iron 5 Ft Height Heavy , Tower Fan Mist Air Prime 35 Watt High Speed 40Mm Make - Usha (White Color) , Tower Fan Mist Air Prime 35 Watt High Speed 40Mm Make - Bajaj (White Color)
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 5
Maharashtra View Result →
28.
Public Administrative Department #11276744 Technical Bid
Tender for Labour Engaged For Desilting,Readjustment Of Manholes Covers, Diverting The Direction Of Water Dewatering During The Execution Of Work And Disposal Away From Site. , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Meters Lead For Thickness Of Tiles Above 25 Mm And Upto 40 Mm. , Dismantling Dressed Stone Work Ashlar Face Stone Work, Marble Work Or Precast Concrete Work Manually/By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge , Dismantling Roofing Including Ridges, Hips Valleys And Gutters Etc., And Stacking The Material Within 50 Meters Lead. , Dismantling Of Flexible Pavement (Bituminous Courses) By Mechanical Means And Disposal Of Dismantled Material Upto A Lead Of 1 Kilometer, As Per Direction Of Engineer-In-Charge. , Dismantling Manually/ Mechanically Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge: Bituminous Road. , Demolishing Cement Concrete Manually/By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge:1:4:8 Or Leaner Mix (I/C Equivalent Design Mix) , Demolishing Lime Concrete Manually/By Mechanical Means And Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. , Demolishing Brick Work Manually/By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge:In Cement Mortar , Demolishing Cement Concrete Manually/By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge: 15.2.1 1:3:6 Or Richer Mix (I/C Equivalent Design Mix) , Demolishing Reinforced Cement Concrete Work Manually/By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. , Demolishing R.B Work Manually/By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. , Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. (Not Exceeding 1.5 M In Width) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil : , Earth Work In Bulk Excavation By Mechanical Means (Hydraulic Excavator) Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 M2 On Plan) Including Disposal Of Excavated Earth Lead Upto 50 Meters And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. All Kinds Of Soil : , Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As10 Sqm On Plan Including Disposal Of Excavated Earth, Leadupto50meterand Lift Upto 1.5M, As Directed By Engineer-In-Charge.All Kinds Of Soil : , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) In Trenches For Foundations, Drains, Pipes, Cables Etc. (Not Exceeding 1.5 M In Width) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed, Within A Lead Of 50 Metres:All Kinds Of Soil : , Removal Of Excavated Mulba Dismantled Or Unserviceable Material From The Site Of Work By Mechanical Transport Or Animal Transport Or Otherwise Including Loading/Unloading(Complete Job) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 4.4.8 1:5:10 (1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level 1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts,Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchors Blocks, Plain Window Sills, Fillets Etcupto Floor V Level, Including Curing But Excluding The Cost Of Centring, Shuttering And Finishing With.1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work In Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Upto Floor Five Level Including Curing But Excluding Cost Of Centering Shuttering, Finishing And Reinforcement. 1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Ready Mixed M-25 Grade Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For All Leads, Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , Excluding The Cost Of Centering, Shuttering Finishing And Reinforcement Including Cost Of Admixtures In Recommended Proportions As Per Is : 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer- In - Charge. Note: - Cement Content Considered In This Item Is @ 330 Kg/ Cum. Excess/ Less Cement Used As Per Design Mix Is Payable/ Recoverable Separately.All Works Upto Plinth Level , Providing And Laying In Position Ready Mixed M-25 Grade Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For All Leads, Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , Excluding The Cost Of Centering, Shuttering Finishing And Reinforcement Including Cost Of Admixtures In Recommended Proportions As Per Is : 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer- In - Charge. Note: - Cement Content Considered In This Item Is @ 330 Kg/ Cum. Excess/ Less Cement Used As Per Design Mix Is Payable/ Recoverable Separately. All Works Above Plinth Level Upto Floor V Level , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For: Foundations, Footings, Bases For Columns , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters Buttresses, Plinth And String Course Fillets, Kerbs Andsteps Etc. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Edges Of Slabs And Breaks In Floors And Walls , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platforms. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Arches, Domes, Vaults Upto 6 M Span , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level With Cold Twisted Bar , Steel Work Welded In Built Up Sections/Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. , Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Welded , Providing And Laying River Bed Material On The Road Surface By Way Of Spreading The Same In Uniform Layer Not Exceeding 20Cm In Depth, Watering And Compacting With Vibratory Power Road Roller Of 8-10 Tonne Capacity Incl Carriage Of Material From Source To Site Of Work (All Leads , Lifts Complete).The Measurement Is To Be Taken Of Compacted / Finished Work. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Upto 50 M And Lift Upto 1.5 M. , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto 1.5 M In -All Kinds Of Soil. , Providing And Fixing 60Mm Interlocked Paver Tile Over A Layer Of Cement Mortar 1:4 Mix Incl Filling Of Joints With Cement Mortar 1:3 (Complete Job) , Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand Complete All As Per Direction Of Engineer-In-Charge. 80 Mm Thick cement concrete Paver Block Of M-30 Grade With Approved Color Design And Pattern. , 12Mm Cement Plaster Of Mix: 1 : 6 ( 1 Cement : 6 Fine Sand) , 12Mm Cement Plaster Of Mix: 1 : 4 ( 1 Cement : 4 Fine Sand) , Brick Work With Common Burnt Clay (Non-Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In : Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand) , Extra For Brick Work With Common Burnt Clay Bricks/Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level , Tile Brick Masonry With Common Burnt Clay Tile Bricks Of Class Designation 10 In Foundation And Plinth Including Curing Complete In: Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Fine Sand) , Providing And Laying Bituminous Macadam Using Crushed Stone Aggregates Of Specified Grading Premixed With Bituminous Binder, Transported To Site By Tippers, Laid Over A Previously Prepared Surface With Paver Finisher Equipped With Electronic Sensor To The Required Grade, Level And Alignment And Rolling With Smooth Wheeled, Vibratory And Tandem Rollers As Per Specifications To Achieve The Desired Compaction And Density, Complete As Per Specifications And Directions Of Engineer-In-Charge. 50 To 100 Mm Average Compacted Thickness With Bitumen Ofgrade Vg-30 @ 3.5% (Percentage By Weight Of Total Mix) Prepared In Drum Type Hot Mix Plant Of 60-90 Tph Capacity , Supplying,Stacking, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Bound Macadam (Wbm-Iii) With Graded Crushed Stone Aggregate Of Size 53Mm To 22.4 Mm In Uniform Thickness,Hand Picking , Rolling With Vibratory Roller 8-10 Tonne Capacity In Stages To Proper Grade And Camber,Applying And Brooming Requisite Type Screening / Binding Material To Fill Up Interstices Of Coarse Aggregate,Watering And Compacting To The Required Density.Complete Job , Providing And Applying Tack Coat Using Hot Straight Run Bitumen Of Grade - Vg-30, Including Heating The Bitumen, Spraying The Bitumen With Mechanically Operated Spray Unit Fitted On Bitumen Boiler, Cleaning And Preparing The Existing Road Surface As Per Specifications. On Bitumen Surface @ 0.50 Kg/Sqm. , Hand-Packing Stones In Wire-Crates; Excluding Cost Of Crates And Stones , Providing And Applying Tack Coat Using Hot Straight Run Bitumen Of Grade - Vg-30, Including Heating The Bitumen, Spraying The Bitumen With Mechanically Operated Spray Unit Fitted On Bitumen Boiler, Cleaning And Preparing The Existing Road Surface As Per Specifications.16.38.1 On W.B.M. @ 0.75 Kg/Sqm. , Providing And Laying Seal Coat Of Premixed Fine Aggregate (Passing 2.36 Mm And Retained On 180 Micron Sieve) With Bitumen Using 128 Kg Of Bitumen Of Grade Vg-30 Bitumen Per Cum Of Fine Aggregate And 0.60 Cum Of Fine Aggregate Per 100 Sqm Of Road Surface Including Rolling And Finishing With Road All Complete , 2.5 Cm Premix Carpet Surfacing With 2.25Cum And 1.12 Cum Of Stone Chippings Of 13.2 Mm And 11.2Mm Size Respectively Per 100 Sqm And 52 Kg And 56 Kg Of Hot Bitumen Per Cum Of Stone Chippings Of 13.2 Mm And 11.2 Mm Size Respectively Including A Tack Coat With Hot Straight Run Bitumen Including Consolidation With Road Roller Of 6 To 9 Tonne Capacity Etc. Complete (Tack Coat To Be Paid For Separately). Vwith Paving Asphalt Grade Vg-30 With No Solvent , 10Cm Thick (Average) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa At 35Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 (1 Clay: 1 Cow Dung) And Covered With Specified Tile Bricks Grouted With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finishing Neat. 12.25.1 With Common Burnt Clay (Non Modular) Brick Tiles Of Class Designation 10.0 , Providing And Fixing Precoated Galvanized Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : 12.24.1 Ridges Plain (500 - 600Mm) 12.24.2 Flashings/ Aprons.(Upto 600 , Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6mm Angle Iron And 3Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer. Using Flats 30X6mm For Diagonal Braces And Central Cross Piece. , Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 2 Mm Thick , Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade. Two Or More Coats On New Work , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade. Two Or More Coats On New Work , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade On New Work (Two Or More Coats Applied @ 1.67 Liter/10Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20Kg/10Sqm) , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1Cement :4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete Size Of Tile 600X600 Mm , Chequerred Precast Cement Concrete Tiles 22Mm Thick In Footpath And Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Including Rubbing, Cleaning And Curing Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand) . Dark Shade Using Ordinary Cement. , Providing And Fixing 15 Mm Nominal Bore C.P. Brass Bib Cock Of Approved Quality Conforming To Is : 8931 , Providing And Fixing 15 Mm Nominal Bore C.P. Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gms. , Pvc Bend , Providing And Fixing Of Pvc Pipe With All Fitting Complete Job , Providing And Fixing Of Pvc Pipe With All Fitting Complete Job , Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion. (I) Single Socketed Pipes 75 Mm Diametre , Providing And Fixing Of Pvc Including All Fitting With Complete Job , Providing And Fixing Of Towal Ring With All Fitting With Complete Job , Providing And Inserting Upvc Pipe ( Working Pressure4kg/ Cm2) Single Sockted Pipe 110 Mm Dia , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, Including Cutting And Making Good The Walls Etc.: Internal Work-Exposed On Wall 15 Mm Dia. Nominal Bore , Dumping Of Stone Including Cost Of Stone Filling, Including Supply Of Stone And Carriage Complete Job , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Supply Of Wire Crates Of Approved Mesh Including Weaving Binding Sides And Partitionsand Binding Top After Filling Complete Job. , Extra For Every Additional Lift Of 1.5 M Or Part There Of Beyond 1.5 M Height For Hand-Packing Of Stones In Wire-Crates , Providing And Fixing Of Weep Hole With Pvc Pipe Of 100 Mm Dia Complete Job , Providing And Fixing Of Weep Hole With Pvc Pipe Of 110 Mm Dia Complete Job , Stone Work In Super Structure Upto Floor Five Level In Cement Mortar 1:6 ( 1 Cement :6 Coarse Sand) Including Pointing With Cement Mortar 1:2 ( 1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade And Curing Complete: White Sand Stone , Stone Work Plain Ashlar In Super Structure Upto Floor Five Level In Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand) Including Centering, Shuttering And Pointing With Cement Mortar 1:2 ( 1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade And Curing Complete: Red Sand Stone B White Sand Stone , Plastering With Lime Surkhi Mortar Of 20Mm Thickness Including Preparation Of Mortar, Tamping, Curing, Prepared By Traditional Methods Including Mixing Of Gur, Tamarind Water, Dal Etc. As Per Tradition, The Work Is To Be Done With All Leads And Lifts, Surfaces To Be Plastered Shall Be Thoroughly Cleaned Of All Dust, Grease, Oil Etc. All Surfaces Should Be Kept Damp During The Progress Of Work. The Engineer-In-Charge Will Inspect And Approve All Preparatory Work. Curing To Be Done For 21 Days By Means Of Spraying , Roviding And Applying Lime Kara 1:2 (1 Lime: 2 Zikki Powder) Grinding Mortar With Grinding Mill/Manually On Lime Base, On All Flat Surface In Two Coats. First Coat Applying 3 To 4 M Thick And Curing Properly At Least 7 Days, Second Finishing Coat Done After 7 Days Of Previous Coat As Per Tradtional Practice (Thickness Not More Than 6Mm). , Providing Protective Coating Of Water Repellent Siloxane (Transparent In Color) Through Brush Or Spray Until Complete Impregnation Over Completely Cleaned And Dried Stone Or Plastered Surface To Reduce The Absorption Of Water , Taking Out Existing cement concrete Interlocking Paver Blocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Meter Lead As Per Direction Of Engineer-In-Charge. , Providing And Fixing Steel (White Powder Coated) Crescent Lock For Upvc Sliding Window/ Door With Necessary Screws Etc. Complete , Providing And Fixing Of Steel Banches , Providing And Fixing Glass Panes With Putty And Glazing Clips In Steel Door/ Windows/ Clerestory Window All Complete With 5.00Mm Thick Glass Panes Complete Job , Providing And Fixing Of Soap Dish , Providing And Fixing Inaugration Plate Including Writing Etc. Complete Job. , Carriage Of Materials By Mechanical Transport Including Loading / Unloading & Stacking Complete Sand For An Avg Distance Of 5 Kms , Carriage Of Materials By Mechanical Transport Including Loading / Unloading & Stacking Complete Stone Aggrigate For An Average Distance Of 7 Kms By Mt. , Carriage Of Materials By Mechanical Transport Including Loading / Unloading & Stacking Complete Brick For An Avg Distance Of 5 Kms , Electrification Items : Supply, Installation, Testing & Commissioning Of 5 Mtr Height Decorative Pole Made Of Galavnised Mild Steel Pipe Duly Polyurethane (Pu) Paint Coated With 1 Mtr. Long Double Arm Designer Bracket Is Made Of Round Tube Conforming To Is 1161. The Pole(Od Of 114.3Mm And Thickness-3.6Mm) With Bracket Is Given Pre-Treatment And Finished With Pu Paint Giving It A Pleasing Appearance And Antique Finish. Pole Shall Be Available To Hot Dip Galvanize The Tube Before Painting. Foundation Bolt Size Shall Be 20X600x4nos. With Base Plate Size 300X300x12mm. A Door Is Provided With Electrical Accessories (Connector, Bakelite Sheet And 6 annual periodical maintenance Single Pole Mcb, Cable Looping Termional For 4X4/6Sqmm Copper Cable). Aluminium Casting In Golden Ring Form At Bottom, Middle, Top Of The Pole. The Pole Will Be Supplied With Brackets And Luminaire Combinations To Suit The Requirement. Branding Name Shall Be Embossed At The Bottom Near Junction/Mcb Box. Sticker Not Allowed In The Form Of Company Branding. Pole Shall Be Supplied With Outdoor Post Top Luminaire Of 45 Watt Ip67 Mounted In Suspension Type Having An Approximate Size Of 460Mm Outer Diameter And 635Mm Height, Housing - Aluminium With Designer Steel Aesthetic Crown, Optical Grade Opal Injection Moulded/Clear Polycarbonate Diffuser And Graphite Grey Uv Resistant Colour,Constant Current Electronic, Driver Provided With High Voltage ,Open & Short Circuit Protection And Ambient Temperature -10C To +40C. Supply 150V- 240V Power Factor 0.95 ,Thd ≤ 20% Internal Surge Protection Of 4Kv With Following Specification Of Light Engine For 45W : 4500Lumens, Cct 3000K ±500 Cct ,Cri 70 And Lumen Maintenance Of L70 At 50000 Hours Ip 65 Connectors,Accessories Etc Complete With All Repects. Design Of Pole Should Be Such That It Should Maintains Proper Illumination On Both Side.(Analysis Attached) , Led Flood Light, Powder Coated Pressure Die Cast Aluminium (System Lumen Efficacy ≥105 120 Lm/Watt). Supplying, Installation, Testing & Commissioning Of Flood Light, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr -15, Lenses For Beam Angle 30 Deg-120Deg As Per The Application And The Project Requirement., Suitable Tilt Able Fitting, Life Time (Led, Driver & Electrical Circuitry) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin) , Sdcm(Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Ofrelevant Bis Standard Complete In All Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥105 120 Lm/Watt Output .Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-Incharge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 250 Watt , Led Linear Profile (Ac) Led Rgb/Rgbww/ Rgbnw/Rgba/Rgbw, Linear Profile / Wall Washer Luminaire For Façade Lighting With Aluminium Extruded/ Die Cast Housing With Inbuilt Driver Of Following Wattage. Wattage Per Meter 25W , Supply, Installation, Testing & Commissioning Of 1.1 Grade, 4Cx10 Sqmm Al. Armoured Xlpe Sheathed Cable Including Termination (Along With Lugs) , Providing And Fixing Of Gi Pipe 50 Mm Dia , Feeder Pillar 1 Phase 2 Wire, 415V, 1Nos Of 100 Amps Incoming Sp Mccbs Fitted With Outgoing 04 No 32 Amps Sp Mcbs For Service Connections, Distribution Service Pillar Suitable For Outdoor Installation , Made Out Of Crca Sheet Painted Through 7-Tank Process With Pu Painted Busbars 2P, Aluminium With Heat Shrinkable Sleeves And Adequate Capacities Complete With All Accessories 4 Way Distribution Service Pillar. Support Galvanised Angle Frame And Legs (40Mm X 40 Mm X 3Mm) For Distribution Feeder Pillar With Leg Height 1M With 0.3M In Soil Approx [email protected] Per Mtr, Earthing Complete By Gi Pipe 40 Mm Or Gi Rod 20Mm 2.5 Mtr Long Through Gi Strip.Cement Grouting For Support Angle Legs, Spares @ 3%, Erection Charges @10%, Overheads @ 5% (1.0% T&P 0.5% Storage And Handling , 3% Contingency And Safety Equipments, 0.5% Insurance) And Turnkey Factor @25% With Astronomical Timer. , Earthing With Copper Earth Plate 600Mm * 600Mm * 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc. With Charcoal/Coke And Salt As Required. , Wiring For Light Point/Fans Point/Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls/Hffr Pvc Insıslated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gf Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group-A , Add For Vetting Charges Consultency And Contigencies @ 2.5 %
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
Jammu And Kashmir View Result →
29.
Defence #11275754 AOC
Tender For Repair To Summer Appliance Equipment And Other Connected Misc Works Under Ge Pulgaon-1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Of 2026-27 Description Of Works Unit Nos Of Units Reqd Rate Per Unit Amount 2345Old Unsv Burnt Compressor Of Any Type And Size Old Unsv Thermostat Of Any Type /Size Old Unsv Relay Unit Of Any Type And Size Old Unsv Capacitor Of Any Type And Capacity Old Unsv Cooling Coil/Evaporator Freezer For Refrigerator Old Unsv Broken,Vegetable Tray,Chiller Tray Old Unsv Bulb Pintype/Thread For Refrigerator Of Any Type And Size Old Unsv Gas Drier Filter Suitable For Refrigerator ,Water Cooler Deepfreezer Split Ac ,Window Ac Old Unsv Copper Capillary Tube Size 31 Gauge Old Unsv Copper Capillary Tube Size 36 Gauge Old Unsv Copper Capillary Tube Size 40 To 55 Gauge Old Unsv Copper Capillary Tube Size 60 To 70 Gauge Old Unsv Copper Pipe ½” Dia Old Unsv Copper Pipe 1/4 Dia Old Unsv Copper Pipe 5/16Dia Old Unsv Copper Pipe 5/8 Dia Old Unsv Copper Pipe 3/8 Dia Old Unsv Electronic Timer Circuit/ Manual Timer Old Unsv Electronic Power Supply Control Pcb For Refrigerator Old Unsv Evaporator Fan Motor,Condenser Fan Motor Of Any Type And Size Old Unsv Push Cock,Stop Cock Old Unsv Broken Top Door Panel Gasket,Fan Blade,Float Valve Old Unsv Material Retrieved From Corroded Bottom Portion Of The Water Cooler Of Any Make & Capacity Old Unsv Material Retrieved From Wornout/Burnt Wiring Of Water Cooler/ Deep Freezer/Refrigerator/Window/Split Type A/C Of Any Capacity Old Unsv Electronic Circuit (Pcb) For 1.5/2.0 Tr Capacity Split Type / Window Ac 62 Old Unsv Fan/Blower Motor Of Window Type Ac Old Unsv Fan Blade For Window Type Ac/Split Type Ac Old Unsv Mcb Protected Power Unit Old Unsv Two Pole /Single Pole Contactor Old Unsv Louver Blades Synchronous Motor/Swing Motor For 1.5/2 Ton Window/Split Type Ac Indoor Unit Old Unsv Electronic Display Assembly Suitable For Window/Split Type Air Conditioner Old Unsv Temperature Sensor Assembly Old Unsv Cooling Coil Unit Suitable For 1.5/2.0 Ton Window/Split Ac Type Ac Old Unsv Heavy Duty Air Conditioner Outdoor Unit Old Unsv Pin/Service Valve Of Size 1/2, 1/4, 3/8, 5/8 Suitable For Refrigerator,Deepfreezer,Water Cooler And Air Conditioner Old Unsv Blower/Condenser Fan Motor Of Window Type Ac Of 1.5/2.0 Tr Capacity Old Unsv Pin Top Of Any Type And Size Old Unsv Fan Motor For Desert Cooler Of Any Type And Size Old Unsv Fan Blade Of Metal Body For Desert Cooler Of Any Type And Size Old Unsv Submersible Water Pump Of Any Type And Size Old Unsv Pvc Water Tube Of Any Type And Size Old Unsv Front Grill , Double Diversion Of Any Type And Size Old Unsv Two Sides And One Back Sutter Having Grooves Of Any Type And Size Old Unsv Water Tank Of Desert Cooler Old Unsv Desert Cooler Cabinet Fabricated Old Unsv Material Retrieved Rewinding Of Exhaust Fan / Kit Fan Motor Of Desert Coolers Old Unsv Switch Assembly Old Unsv Cord Flexible Three Core Copper Conductor Multi-Stranded Old Unsv Angle Iron Frame Old Unsv Cooling Coil Unit Of Split Type Ac Old Unsv Cu Cable Of Any Type And Size Old Unsv Swing Motor
Contract Date: Jun 11, 2026 Contract Value : 19.11 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Maharashtra View Result →
30.
Tourism #11266721 AOC
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. B) All Types Of Ordinary Rock Including All Types Of Laterite Rock, Blasting Prohibited , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Brick Work Using Common Burnt Building Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) With Bricks Of Class Designation 40 Kg / Cm2 (Wire Cut Bricks) In Superstructure Upto Floor Five Level. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry Usign Fly Ash Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) With Bricks Of Class Designation 40 Kgs / Cm2. Above Plinth Upto Floor V Level 200 X 95 X 95 , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: A) All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) With Usage Of Ordinary Portland Cement Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineerin-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. Moulding As In Cornices, Window Sills Etc. Exceeding 15 Cm In Girth. , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates Columns, Pillars, Posts & Struts (Circular Or Curved In Plan) , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4b Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint. B) In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc.With Hairline Finish, Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). , Providing & Fixing Upvc Door Frame Yashashri Make Or Equivalent Made Out Of Upvc Extruded Multi Cavity Frame Of 60 Mm X 60Mm X 2Mm Wall Thickness. Frame Is Reinforced With G.I. Channel & Welded In Corners With Average Weight 0.80 Kg Per Running Mtr. These Frames Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing & Fixing 20 Mm Door Shutter Yashashri Make Or Equivalent, Made By Using 20Mm X 155Mm X 1.2Mm Upvc Multi-Cavity Section And Boarder Of 30Mm X 40Mm X 2.5Mm Upvc Multi Cavity Section. The Corners Are Joined By Inserting Polymetric Corners & Hardware Used For Fixing The Door Shutter Is Stainless Steel Hinges & S. S. Handle & S.S. Tower Bolt. The Average Weight Of 20Mm Door Shutter Is 4.60Kg Per Sq Mtr. These Upvc Sections Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete 250 X 16 X 5 Mm , Providing & Fixing Bright Finished Stainless Steel Ss 304 Grade Aldrops With Screws Etc. Complete. 250 X 150Mm. All Works Complete As Per The Drawing, Specification And Direction Of The Engineer-In-Charge-In-Charge , Providing And Fixing Stainless Steel D Type Handles With Necessary Screws Etc Complete A) L 300Mm/325Mm X 22 To 25Mm Dia , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete 125 X 70 X 4.0Mm (Ordinary Type) , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 200 X 10 Mm , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 150 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And Fixing Of Aluminium Windows With Three Tracks And Three Shutters Sliding Windows With Tubular Frame Sections Powder Coated With Pure Polyster Powder Of Thickness 15-80 Microns With Approved Standard Acessories Such As Ball Bearing Rollers Concealed Lock, 6Mm Plain Clear Glass With Epdm Beading Etc. , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete A) Dark Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. C) 80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm.D) 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In All Colours Except Grey (M35 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In Grey Colour (M35 Grade) , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade, Area Of Slab Over 0.50 Sqm A) Jet Black , Providing 25 Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer-In-Charge , Extra For Providing Opening Of Required Size & Shape For Wash Basin/ Kitchen Sink In Kitchen Platform, Vanity Counter And Similar Location In Marble/Granite/Cuddapah Stone Work, Including Necessary Holes For Pillar Taps Etc. Including Moulding, Rubbing And Polishing Of Cut Edges Etc. Complete. , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) 20 Mm Thick. , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Marble Stone Flooring With 18 Mm Thick Marble Stone (Sample Of Marble Shall Be Approved By Engineer-In-Charge) Over 20Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement:4 Coarse ) Using : , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Approved Make And Colour With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. , Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid Plain White Makrana Marble Slab 25 Mm Thick , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , Providing & Fixing In Position Double Skin Roof With Zincalume/ Galvalume Colour Coated & Bare Profile Sheet With Subtle Square Fluting Factory Cut At All Heights For Roof, Side & Gable Cladding Complete In All Respect. Top Sheet-The End Rib Shall Be Designed For Anti-Capillary Action. The Feed Material Should Be Manufactured Out Of Nominal 0.45 Mm Base Metal Thickness (Bmt), Hi-Strength Steel With Min. 550 Mpa Yield Strength, Metallic Hot Dip Coated With Aluminium-Zinc Alloy (55% Aluminium, 43.5% Zinc &1.5% Si) As Per As 1397 - Zincalume Az150 (Min. 150 Gms/Sq.Mt Total On Both Sides) With Quality Paint Coat As Per As/Nzs 2728 Type 3-4. The Paint Shall Have A Total Coating Thickness Of Nominal 35 Μm, Comprising Of Nominal 20 Μm Exterior Smp Coat On Top Surface And Nominal 5 Μm Reverse Backer Coat On Back Surface Over Nominal 5 Μm Primer Coat On Both Surfaces Of Approved Colour Shade. Total Coated Thickness (Tct) Should Be 0.50Mm. Total Painted Thickness (Tpt) Should Be In Addition To 0.50Mm. The Steel Sheet Shall Be Fastened With Nominal 40 Μm Zinc Coated Or Nominal 25 Μm Zinc-Tin Alloy Coated, Hex Head, Self-Drilling Screw As Per As 3566-2002 Class 3 Fasteners Of Approved Make With Epdm Washer As Per The Requirement Considering The Profile Shape And Design Load. The Fastener Size Shall Be Calculated As Per The Design Or Manufacturers Recommendations. The Profile Sheet, Fastener Size Etc. Shall Be Approved By The Engineer. The Sheeting Should Be With Minimum 200Mm Lap & Waterproof With Silicon Sealant Non-Hardening Neutral Cure Type Shall Be Applied At All End Laps, Complete As Directed Z-Sub Girt - Roll Formed Section 50X50x50x1.50 Tct, 120Gsm Galvanised, High Strength (345 Mpa), Approximate Wt. 1.85 Kg/R.M. Fixed With Self Tapping Screws Glass Wool Insulation With Fsk Facing 50Mm With 24 Kg/M3 Density In Between 2 Sheets. Liner Sheet-Bare Galvalume/Zincalume Roofing Sheet Of Same Profile As Top Sheet. The Feed Material Is Of Manufactured Out Of Nominal 0.45 Mm Base Metal Thickness (Bmt) (0.47 Mm Tct), Hi-Strength Steel With Min. 550 Mpa Yield Strength, Metallic Hot Dip Coated With Aluminium-Zinc Alloy (55% Aluminium, 45% Zinc) As Per As 1397 - Zincalume Az150 (Min. 150 Gms/Sq.Mt Total On Both Sides), Passivated & Resin Coated. The Feed Material Should Have Coil ManufacturerS Product Details Marked At Regular Interval For Confirming Genuinity Of The Material. Complete As Per The Directions Of The Engineer. The Steel Manufacturers Test Certificate For The Chemical & Mechanical Properties Of Steel Must Be Submitted For Approval Prior To Installation. , Add For Providing & Fixing Flashings -[Corners, Ridges, Valleys, Gable End & Trims] (Girth Upto 610Mm) Including All The Accessories Complete As Per The Directions Of The Engineer In Charge. , Providing And Fixing Prince Or Equivalent Make Pvc Swr Half Round Eaves Gutter With Bolts, Nuts And Flat Iron Brackets 40 X 3 Mm Size Complete. 140 Mm Nominal Size , Extra For Providing Flat Iron Bracket 50 X 3 Mm Size Instead Of 40 X 3 Mm Size With Necessary Bolts Nuts, Washers Etc. For Fixing A.C. Gutters To Purlins. , Extra For Providing And Fixing Prince Or Equivalent Make Pvc Swr Short Stop Ends For Socketed Half Round Eaves Gutters. 140 Mm Nominal Size , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Demolishing Reinforced Cement Concrete Work Including Stacking Of Steel Bars & Disposal Of Unserviceable Within 50 Mts. Lead. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Steelwork In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates Bolts, Nuts, Cutting Dismembering And Staking Within 50 Mts. Lead , Dismantling G.I. Sheets Roofing Including Ridges, Hips Valleys And Gutters Etc. And Stacking The Material Within 50 Meters Lead. , Dismantling Asbestos Sheet Roofing Including Ridges, Hips Valley And Gutters And Stacking The Material Within 50 Meters Lead. , Dismantling Tiled Roofing (Mangalore Or Pot Or Country Tiles) With Battens Etc. Complete Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Taking Out Existing cement concrete Interlocking Paver Blocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge. , Carting Away Unwanted Excavated Material Such As Soil, Lime, Moorum, Building Rubbish, Laterite Stone, Excavated Earth, Ordinary Rock Etc. From Site Lead Of 5 Km Including All Loading & Unloading Charges ( A ) ( By Mechnaical Automative Transport ) Contractor Should Arrange Land For Dispose Up These Material At His Own Cost Lead Upto 5 Km. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. , Supply, Fabrication And Installing In Position Ms Gates Of Required Width And Height Of Including Wicket Gate And Rolling Gate(If Necessary) Of Approved Size Made Of Channels Joists, Angles, Plates, Pipes And Ms Sheets Including Stiffeners, Bracing, Fabricated Hinges, Ms Aldrops Locking Arrangement, Tempered Steel Pivots, Guide Track Of Ms Tee, Ball Bearing Arrangement, Casters Wheels Etc. All Complete As Per Drawing, Specification And As Directed By Engineering In Charge All Complete. The Main Entrance Gate Shall Be Fabricated Out Of Mild Steel Sections Completed With Applying A Priming Coat Of Approved Steel Primer And Two Coats Of Synthetic Enamel Painting. The Structural Steel Works For Gates Shall Include Supply, Fabrication, Transportation, Erection Of Structural Steel Gates Complete With Placing In Position Embedded Parts In Concrete / Brickwork And In Road Surface Including Cutting, Grinding, Drilling Of Holes, Welding And Painting Etc Complete , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design. : , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge A) 110 Mm Dia , Supplying And Fixing Of Precast Reinforced Cement Concrete Slabs(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) At Site In Concrete Grade Of M-25 With 20 Mm Nominal Size Granitic Or Basaltic Aggregate, Consolidated By Means Of Mechanical Platform, Vibration Etc. With Lifting Hooks Of M.S. 10Mm Bars And Pvc Cups Including Cost Of Reincforcement, Certificate From Manufacturer Shall Be Produced Indicating Grade Of Concret And Minimum Content Of Steel In The Product Along With 5 Year Free Replacement Warranty In Case Of Breakage Complete And As Directed By Engineer -In -Charge. Size 900 X 400 X 100 Mm With Steel Reinforcement Not Less Than 5.0 Kgs Per Unit -12 T Capacity , Providing & Fixing Of Reinforced Cement Concrete Gril Of Size 1.00 M X 0.6 M Ht Placed And Fixed On Coping Band For Compound Wall As Per Detailed Drawing Etc Complete , Construction Of Deepstambh Of Reinforced Cement Concrete Pillar With Exposed Laterite Masonary Of Octagonal Shape (1500Mm Length Of Each Side And Total Height Of 5500Mm) With Openings For Placing Diya Lamps And Foundation Platform Of Size (1800Mm Length Of Each Side And Height Of 1500Mm) Including Molding,Etc. As Per The Detail Drawings And As Directed By Engineer In Charge. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Paduka, Padma And Kumuda For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 450 Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Corner (Ht 4.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Adhopadma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 450 Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Cornice Above Adhopadma ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 900Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2100Mm Height, 750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1500Mm Height ,750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Karnakuta ), Using 1:4 Morter Mixture With Bricks Chips, Featuring A 60Mm Height, 750Mm Width Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Yalli ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 750Mm Height, ( Maximum 4 Hands & 4 Ayaudhas ) Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1200Mm Height,( Maximum 4 Hands & 4 Ayaudhas ) Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple Small Stupi ( Bagil Paik ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2400Mm X 2400Mm X 1800Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Flowers At The Ceiling With Dia. 1.20Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Plumbing Works , Proving And Fixing White Vitreous China Wall Hung Type (European Type) Water Closet With Seat And Lid With C.I. Brass Hinges And Rubber Fittings With Flush Valve Nelson/ Similar Fully Chromium Plated With Stop Cock, Wall Flanges, Flush Pipe Or Elbow And Vaccum Breaker Coupling Etc. Including Chair Bracket/Rag Bolts, Cutting & Making Good The Walls And Floors Where Required And Concealed Seat Support - W.C. Pan With White Plastic Seat And Lid , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Two Way Bib Cock With Single Knob And Wall Flange Conforming To Is 8931:1993 15Mm Nominal Bore , Proving And Fixing White Vitreous China Water Closet Squatting Pan (Indian Type W.C. Pan) Size 580 Mm With 100 Mm Sand Cast Iron P. Or S Trap 10 Litres High Level P.V.C. Flushing Cister (Of Approved Make) With Fittings, Rack Bolts 32 Mm Diameter P.V.C Telescopic Flush Pipe With Fit Tings And Clamps 25Mm P.V.C. Over Flow Pipe With Specials & Mosquito Proof Coupling Of Approved Municipal Design And Nylon Pull Complete Cutting And Making Good The Walls And Floors Where Required Long Pan Pattern W. C. Pan , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Large Lipped Front Urinal Basin Of 590X375x390mm Size With Urinal Valve Auto Closing System With Built In Control Cock & Wall Flange With Fittings, Spreader, R.S. Or C.I. Brackets, Standard Size C.P. Brassl Flush Pipe And Spreaders With C. P. Brass Unions & C. P. Brass Clamps With Waste Fitting As Per Is 2556, Pvc Trap With Outlet Grating And Other Couplings In Cp Brass Complete, Including Painting, Fittings, Cutting And Making Good The Walls And Floors Where Required. - Range Of One Urinal Basin , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75 Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Constructing Brick Masonry Manhole Or Inspection Chamber With Second Class Bricks In Cement Mortar 1:5 (1 Cement :5 Fine Sand) Reinforced Cement Concrete Top Slab With 1:2:4 Mix (1 Cement: 2 Coarse Sand ;4 Graded Stone Aggregate 20Mm Nominal Size Foundation Concrete 1:2:4 Mix (1 Cement ;2 Coarse Sand :4 Graded Stone Agrregate 40Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With A Floating Coat Of Neat Cemetn And Making Channels In Cement Concrete 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 90 X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455 X610mm Internal Dimensions Total Weight Of Cover Ad Frame To Be Not Less Than 38 Kg. (Weight Of Cover 23 Kg. ) , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:. 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 32Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Non-Return Valve Of Approved Quality : 40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality Low Pressure With Copper Floats 25 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 20 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 25Mm Outer Dia. , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc25 Mm , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete 150 Mm , Conveying Carefully From Stack At Site, 250M From Both Sides Rolling And Lowering Into Trenches, Laying And Jointing True To Line And Level, Reinforced Cement Concrete Spun Pressure And Non Pressure Pipes Of Various Classes, Specials Including Collar And Perfect Linking Of Joint With Jack To Correct Position Including Cost Of Jointing Material In Cement Mortar 1:2, Necessary Hydraulic Testing, Curing Of Cement Mortar Etc. Complete. 150 Mm , Providing And Fixing Angular Stop Cock With Wall Flangue - Jaquar Make. Florentine (Flr-5053N) 15Mm Of Approved Quality. , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701; 1996 1000 Lit. Capacity , Supply Of Inferential, Dry Dial, Type Domestic Water Meter,Suitable For Horizontal Installation, Duly, Sealed Against Tampering With Couplings At Both Ends Having Pulse Output Facility Compatable For Automatic Reading System ,Conforming To Is:779-1974 And Iso 4064-2005 Standards And Bearing Eec/Mid/Oiml Mark, (With Latest Amendments)Along With Test Certificate From Fcri/Nabl As Desired By The Department.25 Mm , Fixing Water Meter & Stop Cock In G. I. Pipe Line Including Cutting & Treading The Pipe And Making Long Screw Etc. Complete (Cost Of Water Meter And Stop Cock To Be Paid Separately) , Providing And Fixing Brass Bib Cock (Heavy) Of Approved Quality : 15 Mm Nominal Bore , Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is 13983 Including Cutting Of Stone And Making Good The Walls Wherever Required. Kitchen Sink Without Drain Board. With Coupling & All Accessories Complete With Choke Stop Strainer, Plain Type Having Flat Borders For Correct Sandwithing Between The Plaform Top And Bottom Slabs Complete. Overall Size 610Mmx510mm (24X20) Bowl Size 545Mmx445mmx200mm (211/2X 17 1/2X 8) Depth 200 Mm. Glossy. 1.0Mm Thk, , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Pillar Cock With Extended Lever Handle And Wall Flange Confirming To Is 8931; 1993 15Mm Nominal Bore , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of Architectural Designed Pole Of 3Mtr Height Post Top Pole Made Of Galvanised Iron Sections Of 114Mm & 60Mm Dia. This Architecturally Designed Pole Is Structurally Sound. Windspeed Considered Should Be As Per Is875:Part 3:1987 ,Material For Tubes Steel Of Grade Yst210.,Material For Base Plate Steel Of Grade E250 To Is2062; 2011. The Pole Will Be Provided With An Inbuilt Junction Box To Fix 16-32Amp Connectors & 6-16Amp Mcb Inside The Cut Window Of The Bottom Pipe The Inbuilt Box Should Have A Flush Door Of Suitable Size With Allenkey Locking On Bothside. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 200X200mm Having 10Mm Thickness. The Base Plate Shall Have 4 Hole Suitable For M16/450 Foundation Bolts . The Galvanized Zinc Coat Should Not Be Less Than 65+/ 10Microns. The Galvanised Pole Should Be Painted In 3Layer Coating (Coating Thickness Should Not Be Than 80Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint With Overall 100 +/- 10 Microns. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of 45-50W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40-45W Led. Fitting Shall Be Post Top Mounting Type Fixture. System Wattage: 40-45W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply, Led Lumens:6000Lm, Cri(Ra):80, Led Colour Temperature: 4000K, Life Span:60,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv . Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Of Concealed Type Step Light With 6W Led Lamp Die-Cast Aluminium Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs. At L70b50, Including Driver By Making Necessary Arrangement/Recess In Wall To Make It Flush With Surface ,Ip Rating : Ip 67 ,Ik10 Rated , Connecting Wire, Including Gear Box And Junction Box For Cable Connection Complete And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Thd0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70b50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-18 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -6 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (C) 50 To 100 A , Supply Of 3 Kva 3 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing Following Way Spn Sheet Steel Mcb Distribution Board Consumer Unit 240 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Hinged Front Acrylic Cover For The Mcb Knobs Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (B) 2 + 8 Way Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. B) Dp, Cat A , Supplying And Fixing Following Rating Double Pole (Single Pole And Neutral) 240 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required (A) 25 A, Cat A , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator)(C) 6 Way (8+18), Double Door, Horizontal Type Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(E) Tpn, Cat A , Supplying And Fixing Following Rating Four Pole (Triple Pole And Neutral) 415 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required (A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Isolator 2 Pole 40A, Cat A , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (C) 6 Module (200Mm X 75 Mm) Cat A , Supplying & Erecting Of Led 9 To 10W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Ip 20 Led 40W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Ip 66 Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying And Erecting Outdoor Type/Ip65 12W Ceiling-Mounted Led Downlight Having Extruded And Die Cast Aluminium Housing With High Corrosion Resistance Surface Finish With Integral Control Gear And Beam Angles - Narrow, Medium, Wide ,Complete With All Required Accessories .Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supply And Erecting Fan Hook Box ( 100 Mm Diameter Or Equivalent Square Size, 75Mm Deep) Fabricated Out Of 16 Swg Sheet Steel With 10 M Round Bar Hook Bounded To Reinforced Cement Concrete Steel Upto 50 Mm Length Protruding On Each Side Of The Box, Including Painting With 2 Coats Of Red Oxide, Complete As Required. , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Gi Pipe Medium Class 25 Mm (Civil Gsr 1034 (F)(Iii)) , Supply Of 2Kva ,1Ph In - 1Ph Out True Online Ups System In Standalone Configuration With Advance Dsp Based Technology Double Conversion Igbt Rectifier And Igbt Based Inverter Ups System With Cabinet And Smf Battery Backup For 60 Mins. Using 12V Batteries Including Battery Protection M.S Rack Suitable Dimension, Standard Rating Cable For Interlinks Cable And D.C Cable Up To Standard Length In Mtrs From Ups To Batteries Including Labour Charges For Installation Testing And Commission And Carrying Charges.(With Out Isolation Transformer)
Contract Date: Jul 03, 2026 Contract Value : 5.42 Crore
Government Departments No of Bidders 2
31.
Public Administrative Department #11262913 Technical Bid
Tender for Electrical Materials Including Loading, Unloading, Stacking Etc. Complete At The Office Of Municipal Council Sirmour, District- Rewa, For Financial Year 2026-27. , Tubelight Rod 4 Feet (40 Watt) , Copper Wire 3/20 Per Bunddle Isi Mark , Copper Wire 1/18 Per Bunddle Isi Mark , Copper Wire Flexible Per Bunddle Isi Mark , Cutout 32 Ampere , Cutout 63 Ampere , Cutout 16 Ampere , Cutout 100 Ampere , Bulb Holder Pendent , Plug Socket Three Pin 5 A.A.O. , Plug Socket Three Pin 3 A.A.O. , Plug Socket Three Pin 2 A.A.O. , Switch 5 annual periodical maintenance , Main Switch 30 annual periodical maintenance , Main Switch 63 annual periodical maintenance , Main Switch 100 annual periodical maintenance , Main Switch 200 annual periodical maintenance With Side Handle Hrc Fuse , Main Switch 400 annual periodical maintenance With Side Handle Hrc Fuse , Board 10×12 (Modula Punch Box) , Board 8×10(Modula Punch Box) , Board 8×4 (Modula Punch Box) , Board 7×4 (Modula Punch Box) , Board 4×4 (Modula Punch Box) , Casing Patti .P.V.C. (Different Size) , Elvo ,P.V.C. , T.P.V.C. , External P.V.C. , Pench 2½ Steel Internal P.V.C. , Pench 1½ Steel , Pench ¾ Steel , Pench ½ Steel , Pipe Band ¾ Pipe , Pipe Band ½ Pipe , Flood Lighting Series 1×500 Watt , Flood Lighting Series 1×1000 Watt , Power Saver Fixture 4×24 Watt , Power Saver Fixture 2×24 Watt , L.E.D. 15 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 30 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 50 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 90 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 100 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 120 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 150 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 200 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 240 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 300 Watt Flood Light Complete Isi/Iso Certified With Warranty , A.C. Aluminium Wire 12 Sqm M.M 300 Feet , A.C. Aluminium Wire 10 Sqm M.M 300 Feet , 2 Feet 24 Watt Tube Rode , 2 Feet 24 Watt Electronic Choke , M.C.V. S.S. 10A. With End Box , M.C.V. S.S. 15A. With End Box , M.C.V. S.S. 20A.With Endbox , M.C.V. S.S. 25A.With Endbox , M.C.V. S.S. 32A.With End Box , M.C.V. S.S. 63A. Withend Box , 24 Watt Rod Holder , Multi Copper Wire 0.75 Sqm.M. , Multi Copper Wire 1 Sqm.M. , Multi Copper Wire 1½ Sqm.M. , Multi Copper Wire 2 Sqm.M. , Multi Copper Wire 2½ Sqm.M. , Multi Copper Wire 4 Sqm.M. , Multi Copper Wire 6 Sqm.M. , Multi Copper Wire 8 Sqm.M. , Multi Copper Wire 10 Sqm.M. , Multi Copper Wire 16 Sq M.M. , Starter 7.5 Hp , Led Bulb 12 Watt Isi Certified Compny With Warranty , Led Bulb 15 Watt Isi Certified Compny With Warranty , Led Bulb 18 Watt Isi Certified Compny With Warranty , Led Bulb 23 Watt Isi Certified Compny With Warranty , Led Bulb 27 Watt Isi Certified Compny With Warranty , Led Bulb 32 Watt Isi Certified Compny With Warranty , Led Bulb 40 Watt Isi Certified Compny With Warranty , Pluck Socket 3 Pin 15 annual periodical maintenance , Switch 15 annual periodical maintenance , Armoured Cable 8 Sqm.M. (Lead) 2 Core Aluminium , Armoured Cable 10Sqm.M. (Lead) 2 Core Aluminium , Armoured Cable 12 Sqm.M. (Lead) 2 Core Aluminium , Armoured Cable 25Sqm.M. (Lead) 4 Core Aluminium , Lt Cable 35 Sqm.M. (Lead) 4 Core Aluminium , Ltcable 50 Sqm.M. (Lead) 4 Core Aluminium , Lt Cable 50 Sqm.M. (Lead)5 Core Aluminium , Lt Cable 95 Sqm.M. (Lead) 5 Core Aluminium , Aluminium Wire 6 Sqmm , Aluminium Wire 8 Sqmm , Aluminium Wire 10 Sqmm , Aluminium Wire 12 Sqmm , Aluminium Wire 14 Sqmm , Aluminium Wire16 Sqmm , Exhaust Fan 9 Inch , Exhaust Fan 12 Inch , Exhaust Fan 14 Inch , Pvc Wire 4 Sqm Copper Coil , Pvc Wire 2.5 Sqmcopper Coil , Pvc Wire 1.5 Sqm Copper Coil , Pvc Wire 1Sqmcopper Coil , Aluminium Wire 4 Sqm Aluminium Cable , Aluminium Wire 6 Sqm Aluminium Cable , Aluminium Wire 8 Sqm Aluminium Cable , 2 Core Cable 4 Sqmaluminium Coil , 2 Core Cable 12 Sqm Aluminium Coil , 2 Core Cable 6 Sqm Aluminium Coil , 2 Core Cable 8 Sqm Aluminium Coil , 2 Core Cable 10 Sqm Aluminium Coil , 3 Core Cable 4 Qsm Aluminium Coil , 3 Core Cable Sqmaluminium Coil , 3 Core Cable 8 Sqm Aluminium Coil , 3 Core Cable 2.5 Sqm Aluminium Coil , 2*24 Energy Saver Rod For Street Light , 2*36 Energy Saver Rod For Street Light , 2*24 Energy Saver Choke For Street Light , 2*36 Energy Saver Choke For Street Light , 4*36 Energy Saver Choke For Street Light , Fuse Wire , Grander Cutter 800 Watt , Drill Machine 1200 Watt , Energy Saver Rod Holder 36 Watt , Energy Saver Rod Holder 24 Watt , Rechargable Bulb 60 Watt , Rechargable Bulb 12 Watt , Air Heater 2000 Wt , Led Light Strips , Fixture 2*36 , Fixture 4*36 , Clamp 1*1 , Clamp 11.5 , Clamp 2*2 , Kachchi Rubber , Ceiling Fan Energy Saver 60W , 1400 Mm Sweep , Tape Roll , Cooler 70 Ltr Isi Cetified Compney With Warranty , Cooler 90Ltr Isi Cetified Compney With Warranty , Cooler 100 Ltr Isi Cetified Compney With Warranty , Cooler Motoer , Cooler Water Pump , Cooler Pankhi , Cooler Honey Comb Pad , Air Conditioner 1 Ton Five Star Ratting With Complete Fitting , Air Conditioner 1.5 Ton Five Star Ratting With Complete Fitting , Air Conditioner 2 Ton Five Star Ratting With Complete Fitting , Invertar 800 Va , Invertar 1000 Va , Invertar1200va , Bettary 100 Amh Tubelar , Bettary 120 Amh Tubelar , Bettary 150 Amh Tubelar , Bettary 180 Amh Tubelar , Capicitar 2.5 Mfd , Capicitar 4 Mfd , Capicitar 3.15 Mfd , Electric Tool Box Tapariya With Eqipment , Garden Decorative Lamp Post With Light Pvc 8 Inch , Garden Decorative Lamp Post With Light Pvc 12Inch , Garden Decorative Lamp Post With Light Pvc 14 Inch , Garden Decorative Lamp Post With Light Metal 8 Inch , Garden Decorative Lamp Post With Light Metal 12Inch , Garden Decorative Lamp Post With Light Metal 14 Inch , Led Strip Light Water Proof For Garden , Multi Colour Changing 4 Way Outdoor Exterior Wall Light Metal Body For Garden , Junction Box Pvc , Led Acrylic Sign Board Complete Frame With Fitting Labour Charge , Junction Box Pvc 25 Mm One Way , Junction Box Pvc 25 Mm Two Way , Junction Box Pvc 25 Mm Three Way , Junction Box Pvc 25 Mm Four Way , Junction Box Pvc32 Mm One Way , Junction Box Pvc 32 Mm Two Way , Junction Box Pvc 32 Mm Three Way , Junction Box Pvc 25 Mm Four Way , Junction Box Pvc 18 Mm One Way , Junction Box Pvc 18 Mm Two Way , Junction Box Pvc 18 Mm Three Way , Junction Box Pvc 18 Mm Four Way , Stabliser Automatic , Stabliser Autocut , Stabliser Servo , Rgb Switcher With Power Supply Complete Fitting , Autocut Timer Panel 63 annual periodical maintenance , Autocut Timer Panel 100 annual periodical maintenance , Autocut Timer Panel 400 annual periodical maintenance , Invertar 800 Va Ups , Invertar 1000 Va Ups , Invertar1200v Aups , Battery Acid , Battery Distaled Water , Change Over 63 annual periodical maintenance , Change Over 100 annual periodical maintenance , Change Over 400 annual periodical maintenance , Wall Washer Light Waterproof , Projecter Light Waterproof , Spot Light Waterproof , Silencer Light
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Madhya Pradesh View Result →
33.
Public Administrative Department #11258632 AOC
Tender For Providing And Fixing Of Spares For Ht, Lt, Apfc, Starters, Other Panels And Repairing Of Various Equipment And Electrical Installation For Gangapur Dam Pumping Station, Booster Pumping And Various Tp Of Nmc.-1 P/F digital ammeter for measuring current 2 P/F digital voltmeter for measuring voltage 3 P/F multifunction meter 4 P/F selector switches for voltmeter & ammeter 5 P/F light emitting diode type indicator 6 P/F switch disconnector fuse (SDF) a 100A. b 200A. c 300A. d 400A. e 630A. f 800A. 7 P/F moulded case circuit breaker (MCCB) a Up to 100A. b 200A. c 250A. d 315/400A. e 600 / 630A. f 800A. 8 P/F MCB a 6A to 32A b 40A to 63A. c P/F One way distribution board suitable for MCB 9 P/F Busbar chamber with triple pole neutral aluminium bus bar a 100A. b 200A. c 300A. d 400A. e 630A. f 800A. 10 P/F DOL starter a Up to 7.5HP. b Up to 10HP. 11 P/F street light bracket complete 12 P/F FRP box on pole/wall complete a 150mm x 125mm x 100mm, 2.7 mm thick b 250mm x 200mm x100 mm, 2.7 mm thick c 300mm x 200mm x125 mm, 2.7 mm thick 13 P/F LED 22W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete 14 Providing and filling Transformer oil 15 Point wiring in PVC trunking (casing-capping) with (2+1E) copper wire, modular type switch, earthing and required accessories 16 Point wiring for independent plug in PVC trunking (casing capping) with (2+1E )FRLSH grade copper wire, modular type switch, earthing and required accessories 17 P/F mains with 2 X 2.5sq.mm 1.1KV grade copper PVC stranded/solid wire complete (2 core, 71+36(1 core earthing)=107/- ) 18 Supplying and erecting PVC trunking (PVC casingn- capping) of size 25mm with accessories on wall/ceiling 19 P/F half round 15cm dia RCC hume pipe with necessary back filling etc complete 20 Providing and spreading stone metal 25mm size for 100mm depth above the ground level. 21 P/F three phase heavy duty power capacitors in suitable banks with voltage rating 440V, 50Hz 22 Providing and laying Aluminium conductor 3.5 core XLPE/PVC armoured 1.1KV grade cable a 25sq.mm b 35sq.mm c 50sq.mm d 70sq.mm e 95sq.mm f 120sq.mm g 150sq.mm h 185sq.mm i 240sq.mm j 300sq.mm k 400sq.mm 23 Providing and laying Aluminium conductor 1 core XLPE/PVC armoured 1.1KV grade cable a 1 Core, 630sq.mm b 1 Core, 800sq.mm c 1 Core, 1000sq.mm 24 Providing and laying Aluminium conductor 4 core XLPE/PVC armoured 1.1KV grade cable a 4sq.mm b 6sq.mm c 10sq.mm d 16sq.mm 25 Providing and laying Aluminium conductor 2 core XLPE/PVC armoured 1.1KV grade cable a 4sq.mm b 6sq.mm c 10sq.mm 26 Providing and laying copper conductor 2.5sq.mm XLPE/PVC armoured 1.1KV grade cable a 2 Core, 2.5sq.mm b 3 Core, 2.5sq.mm 27 P/L flexible PVC sheathed submersible type copper cable. a 4 core 2.5 sq mm b 4 core 4 sq mm c 4 core 6 sq mm d 4 core 10 sq mm e 4 core 16 sq mm f 4 core 25 sq mm g 4 core 35 sq mm 28 Providing and laying Alu. conductor 3 core, XLPE /PVC 3.3KV armoured cable a 70sq.mm b 95sq.mm c 120sq.mm d 150sq.mm e 185sq.mm f 240sq.mm g 300sq.mm h 400sq.mm 29 P/F heat shrinkable outdoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 30 P/F Heat shrinkable indoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 31 P/F Heat shrinkable straight through joint kit for 3 core, 3.3Kv (E) XLPE HT cable etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 32 Providing and laying Aluminium conductor 3 core, XLPE/PVC 11KV armoured cable a 95sq.mm b 120sq.mm c 150sq.mm d 185sq.mm e 240sq.mm f 300sq.mm 33 P/F heat shrinkable outdoor termination kit for 11Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-95sq.mm b 120-185sq.mm c 240-300sq.mm d 400sq.mm 34 P/F Heat shrinkable indoor termination kit for 11Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-95sq.mm b 120-185sq.mm c 240-300sq.mm d 400sq.mm 35 P/F Heat shrinkable straight through joint kit for 3 core, 11Kv (E) XLPE HT cable etc complete a 70-95sq.mm b 120-185sq.mm c 240-400sq.mm 36 Providing and laying Alu. conductor 3 core, XLPE / PVC 33KV armoured cable a 95sq.mm b 120sq.mm c 150sq.mm d 185sq.mm e 240sq.mm f 300sq.mm 37 P/F heat shrinkable outdoor termination kit for 33Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 38 P/F Heat shrinkable indoor termination kit for 33Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 39 P/F Heat shrinkable straight through joint kit for 3 core, 33Kv (E) XLPE HT cable etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 40 P/F Heat shrinkable straight through joint kit for flexible PVC sheathed submersible type copper cable. a 4 core 2.5 sq mm b 4 core 4 sq mm c 4 core 6 sq mm d 4 core 10 sq mm e 4 core 16 sq mm f 4 core 25 sq mm g 4 core 35 sq mm 41 P/F HT capacitor suitable for 3.3KV in suitable banking 42 Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete 43 Powder coating in siemens gray colour 44 Making Iron work for fabrication with bending, cutting, drilling and welding complete 45 Epoxy painting on both side of approved colour shade of provided iron work 46 P/F GI strip of suitable size 47 P/F M.S. stand for fire bucket 48 P/F Wall hook for fire bucket 49 P/F G.I fire bucket 9Lit 50 P/F Instruction chart 51 Pair of rubber hand gloves 52 Supplying and erecting fire extenguisher 4.5Kg 53 P/F High voltage insulating Electromat confirming to IS 15652 :2006 a Suitable for 3.3KV. b Suitable for 11KV. c Suitable for 33KV. 54 Providing and laying double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete a 50 mm b 75 mm c 90 mm d 120 mm e 160 mm f 175 mm g 200 mm 55 P/F Flood light LED fitting for street light a 50W b 70W c 100W d 120W e 155W f 195W 56 P/F aluminium PVC unarmoured cable 2 X 6sq.mm of 1.1kv grade 57 P/F mini feeder pillar triple pole with 200A MCCB as incomer etc complete 58 P/F mini feeder pillar triple pole with 300A MCCB as incomer etc complete 59 P/F fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work complete 60 P/F double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire meshcomplete 61 P/F 50 x 50 x 6mm angle iron corner support 0.5m away from fence support fixed etc. 62 Providing and fixing ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps 63 P/F analog Ammeter for measuring current 64 P/F analog Voltmeter for measuring voltage 65 Providing and laying XLPE armroured cable for 3.3KV with ISI mark 1 core 630 sq.mm. stranded aluminium wire in an approved manner. 66 P/F heat shrinkable outdoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected the supply with insulated sleeves,additional lugs nut bolts for 1 x 630 sqmm cable with HT testing site etc complete 67 P/F programmable logic controller for Thyristor logic KPOPF – 406 – T. 68 P/F Injector module for Thyristor logic KPIPF 406 – T. 69 P/F Zero switching module for Thyristor logic KPZPF – 406 – T. 70 P/F current generator 440V, 50Hz, for final compensation of real time PFC after basic compensastion using programmable logic controller, relay module, ZCS control thyristor units with its software, hardware, power and control cabling etc complete. a Up to 42A b 42A to 56A c 70A to 105A. d 112A to 140A 71 P/F ROM-51 memory controller with accessories along with routine software program for Thyristor logic. 72 P/F ROM-51 memory controller with accessories along with routine software program for zero switching logic. 73 P/F voltage transformer with 11V, 18-0-18V, 22V, 8V secondary. 74 P/F output module for soft starter-KPOSS-306. 75 P/F proportional Integral card with operational amplifier KPISS-306. 76 P/F analog to Digital converter ATD-09. 77 P/F MCR-31 Main controller with accessories. 78 P/F 7-Segment common anode display controller DSP-79 with accessories. 79 P/F RAM-64 memory unit with accessories. 80 P/F ROM-SS-64 memory unit with accessories along with routine software program. 81 P/F ROM-SS-51 memory unit with accessories along with routine software program 82 P/F flat band cable set 26pin. 83 P/F flat band cable set 20pin. 84 P/F glass type relay O/E/N RL-24. 85 P/F 2A fuse box of EI for power supply (20Nos). 86 P/F 2A glass fuse base open type FBO. 87 P/F tertiary current transformer 88 P/F PLA relay 24D 1NO RDRL-24. 89 P/F SMPS ripple filter choke 5V DC, 1500mA. 90 P/F 24VDC, 10A Electromechanical relay PLA and snubber. 91 P/F voltage transformer with O/P 6.8V, 11.5V, 22.5V Delta to star. 92 P/F programmable logic controller module for contactor logic KPOPF – 406 – C. 93 P/F injector module for contactor logic KPIPF – 406 – C. 94 P/F relay module for contactor logic KPRLPF – 406 – C. 95 P/F ROM-51 memory controller with accessories along with routine software program for contactor logic. 96 P/F thyristor back to back connected suitable for following starters and Capacitor banks. a 75HP. b 120HP. c 215HP. d 300HP. e 10KVAR f 15KVAR g 20KVAR h 25KVAR i 30KVAR 97 P/F inductor suitable for following Capacitor banks. a 10KVAR b 15KVAR c 20KVAR d 25KVAR e 50KVAR 98 P/F electrical contactors. a 32A. b 40A. c 70A. d 110A. e 200A. f 300A. g 400A. h 650A 99 P/F main contact kit for power contactor. a 32A. b 40A. c 70A. d 110A. e 200A. f 300A. g 400A. h 650A 100 P/F HRC fuses. a 40A. b 50A. c 63A. d 100A. e 125A. f 160A. g 200A. h 250A. i 315A. j 400A. k 630A. l 800A. 101 P/F fuse bridges. a Up to 32A. b 63A. c 160A. d 250A. e 800A. 102 P/F change over switches. a 63A. b 125A. c 200A. d 250A. e 315A. f 400A. g 630A. h 800A. i 1000A. 103 P/F timers. a ET-100. b Star-Delta. 104 P/F FASD starter. a ML2 b ML3 c ML4 105 P/F energy efficient street light fitting using 36W CFL lamps complete. 106 P/F 11KV HT fusegear for fuse switch unit of CGLucy 107 Actuator control unit. a P/F forward / reverse contactor b P/F over load relay. c P/F contact kit 108 Providing and laying copper conductor 12 core 2.5sq.mm XLPE/PVC armoured 1.1KV grade cable 109 P/F electronic control unit suitable for up to 175HP, control Supply 240V AC, Power Suply 415V AC, with all test and trials complete. 110 P/F electronic control unit suitable for up to 300HP, control Supply 240V AC, Power Suply 415V AC, with all test and trials complete. 111 P/F limit Switch for gate 112 P/F 10 Turns Preset. 113 P/F panel accessories such as push button with indicators, NO/NC contact, emergency stop push button, copper lug for control cable, gasket, etc complete. 114 P/F C I pipe type earthing etc complete. 115 P/F 230V, 2 C/O panel mounted relay. 116 P/F single phasing preventer relay 117 P/F single phase, under voltage, over voltage protection relay. 118 P/F oil temperature sensing relay 119 P/F winding protection relay 120 P/F reverse rotation sensing relay 121 P/F Motor protection relay for LT motor 122 P/F Control transformer with protection circuit 123 P/F PVC type earthing chambers with accessories for earthing. 124 Power contactor coil LC-1F 330 125 P/F sequence controller 126 Providing, fixing termination box for submersible pump to ATS starter with bus bar, terminations etc complete 127 Providing and laying 95sq.mm copper conductor 1 core flexible PVC unarmoured 1.1KV grade cable 128 Energy meter panel a P/F Energy meter single phase 230V, 50Hz, 10A supply complete b P/F Energy meter 3 Phase, 4 wire, 50Hz, 100A supply complete c P/F L.T. Current transformer of suitable ratio d Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete e Powder coating in siemens gray colour f Control wiring using copper wire, ferrule, lugs, tie saddle, spiral etc complete. g Panel accessories such as hardware, gasket, insulator, panel knob, panel lock for each feeder complete . h Dismantling of old meter panel by disconnecting connections of all cables, etc complete i Installation of new meter panel by fixing meter box, making incoming and out going connection etc complete. 129 Starter Panel a P/F digital ammeter for measuring current b P/F digital voltmeter for measuring voltage c P/F selector switches for voltmeter & ammeter d P/F light emitting diode type indicator e P/F L.T. Current transformer of suitable ratio f Providing and fixing Main Incommer 63A moulded case circuit breaker g P/F 100A Busbar chamber with triple pole neutral aluminium bus bar h Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete i Making Iron work for fabrication with bending, cutting, drilling and welding complete j Powder coating in siemens gray colour k P/F DOL ML 1.5 starter l P/F FASD ML2 starter m P/F FASD ML3 starter n P/F FASD ML4 starter o P/F Over load relay. p Control wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete. q Local/remote wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete. r Panel accessories such as hardware, gasket, insulator, panel knob, panel lock, bus bar terminals, etc complete. s Dismantling of old starter panel by disconnecting connections of all cables, etc completet Installation of new starter panel by fixing starter panel, making incoming and out going connection etc complete. u Terminations main outgoing cables by using lugs glands etc complete. 130 LT Panel, Changeover Panel, Distrubution Panel, Feeder Panel a Power wiring up to 63A feeder using copper wire, lugs, tie saddle, spiral etc complete. b Control wiring for metering using copper wire, ferrule, lugs, tie saddle, spiral etc complete. c Panel accessories such as hardware, gasket, insulator, backlite, panel knob, panel lock, push button with indicators, heavy duty connectors earthing arrangement, etc complete for following feeders i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A d Dismantling, disconnecting connections of all cables, shifting old panel in godown etc complete of following capacity. i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A e Installation of panel at desired place including loading unloading and transportation of following capacity i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A f Making new terminations of main incoming/outgoing cables, etc complete for following feeders. i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A g Interlocking, forward/reverse, timing and control circuit/star delta circuit etc control wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete for one feeder. 131 P/F 3 phase street light timer controller of 60 A per phase rating with in-built relay, timer, protections, display 132 Providing, fixing and testing of HT TOD meter of appropriate class with required accessories along with co ordnation with MSEDCL complete. 133 Providing, fixing and testing of LT TOD meter of appropriate class with required accessories along with co ordnation with MSEDCL complete. 134 P/F Motor protection circuit breaker 135 P/F 3 Phase heavy duty industrial socket. 136 P/F 1 Phase heavy duty industrial socket. 137 P/F and erecting 6mm Polycarbonate multiwall ultravoilet protected sheet for roofing over fabricated steel structure as per detail design, including fixing the Polycarbonate sheet with alluminium angle & Flat anodized & dyed as per approved shade including all water proofing materials, nuts bolts hardware, labour & square pipe, angles, fabrication complete including all hardware etc. as required . (only actual area of polycarborted sheet to be considered for measurements) 138 Making isolation circuit using AB switch / D.O. Set for single pole & converting the cutpoint by dismantling with nessasary material, jumping, earthing along with arrangement of shutdown etc. complete. 139 P/F diesel filling pump for filling diesel in dg sets from store tanks etc complete. 140 P/F meter box for single phase energy meter complete. 141 P/F meter box for three phase energy meter with compartment for mccb/mcb etc complete. 142 P/F of spares for DG control panel a Flush mounted panel meter three phase four wire for frequency etc. b 12V/80AH Battery c 12V/100AH Battery d 12V/150AH Battery e 12 V/180AH Battery f 12V/200AH Battery g Battery water h EPU unit i AVR j AMF Controller k Voltmeter DC l Ammeter DC m Push button n ESR D1 o 12V battery charger p 24V battery charger q Overload relay r Relay s Electronic Timer t Hooter u Connector 143 Reconditioning of transformer a Inspection of distribution transformer on HV and LV side b Dismantling the distribution Transformer from the plinth / foundation c Providing and filling Transformer oil d Painting of transformer using smoke gray paint complete e Providing and rewinding of copper material for HT coils f Heating of core and winding, including removing of moisture etc complete g Providing oil arresting sheet for low tension side of R Y B studs, 5mm thick properly fitted in the studs of transformer. h Providing oil arresting sheet for top cover of oil chamber, LT connection box, oil tank etc parts ,5mm thick properly fitted in the top cover and nut bolts of transformer i Providing R Y B stud bushings over the oil arresting sheet on the studs of transformer . j Reinsulation by high quality uniform covering throughout of 11KV windings using accessories complete k Reinsulation by high quality uniform covering throughout of 415V windings using accessories complete l Repairing and servicing of tap changer of transformer m Transformer oil filtration n Changing silica jel of breather and adding breather oil. o Loading, unloading and transportation of transformer. p Attendance, engineering charges for connection of HT/LT cables and giving satisfactory test & trials of transformer complete 144 P/F Analog input module AI 2xI, 4-wire transmitter (+/-20 mA /13 bits+sign, 4 mA to 20 mA/13 bits), standard 145 P/F Analog input module AI 4xI, 2wire- MU(4..20mA), standard 146 P/F Digital output module DO 8xDC24V/0.5A, supports isochrone mode 147 P/F Power module PM-E for electronic modules, 24 VDC, with diagnostics 148 P/F Digital input module DI 8xDC24V, supports isochrone mode 149 P/F IM151-8PN/DP central processing unit work memory 192KB; 0.06ms/1000 instructions; PROFINET connection; S7 communication (loadable FBs/FCs); PROFINET IO-Controller; supports RT/IRT; PROFINET interface and 3 ports; MRP; PROFINET CBA; PROFINET CBA-Proxy; transport protocol TCP/IP, 150 P/F Communication module with a serial interface (RS232, RS422 or RS485) and Modbus master log with 8 byte I/O interface 151 P/F Communication module with a serial interface (RS232, RS422 or RS485) and Modbus slave log with 8 byte I/O interface 152 P/F Programmable logic controller 1769 TW Digital input module 32 point. 153 P/F Programmable logic controller 1769 Analog input module 8C 0-10V 0-20 154 P/F Programmable logic controller 1769 Digital output module 32 point. 155 P/F Programmable logic controller 1769 Power unit. 156 P/F Programmable logic controller 1769 Compact I/O to DSl module. 157 P/F Programmable logic controller 1769CMPAC Logix processor ethernet 2MB 158 P/F Programmable logic controller 1969 Endcap right. 159 P/F Laser printer Spares for VCB 160 P/F closing coil assembly- 4VC49-110 161 P/F tripping coil assembly- 4VC49-106 162 P/F micro switch 163 P/F breaker auxiliary switch 164 P/F spring charging motor 165 P/F closing shaft with spring. 166 P/F tripping shaft with spring. 167 P/F charging handle assembly 168 P/F pinion gear assembly 169 P/F spur gear assembly 170 P/F bridge rectifier 171 P/F spring for tripping catch 172 P/F tripping catch assembly 173 P/F closing catch assembly 174 P/F driving rod assembly 175 P/F nut assembly 176 P/F cam shaft assembly 177 P/F vacuum interrupter Spares for VC 178 P/F closing coil assembly for VC 179 P/F tripping coil assembly for VC 180 P/F 2 Pole auxiliary switch 181 P/F micro switch 182 P/F bridge rectifier 183 P/F vacuum interrupter 184 P/F contact shroud assembly 185 P/F PDS assembly- 4VC19-0027/01 186 P/F shutter assembly- 3VB79-310/04 187 P/F 5 pole auxiliary switch- J309-022 HT Panel Spares 188 P/F moulded contact shrouds- 1VB79-0009/04 189 P/F shutter assembly- 3VB79-0087/02 190 P/F push button- green button with spring. 191 P/F push button- red button with spring. 192 P/F PDS assembly- with fixing nut bolt- 4VC19- 0027/03 193 P/F insulated stud assembly 194 P/F flexible jumper with fixing bolt- 3VC19-0009 195 P/F coupling 196 P/F bus conductor- upper- 4VC13-0002 197 P/F bus conductor- lower 198 P/F top cover for U barrier- 4VC19-0117/01 199 P/F 16 Pin plug with socket- 4VC46-0303 200 P/F PT fuse 201 P/F voltage transformer (PT) of suitable Ratio secondary 110VAC and suitable class: 202 P/F current transformer (CT) of suitable ratio secodary 5A and suitable class. 203 P/F TNC switch 204 P/F local remote switch 205 P/F PVC shroud- CT/PT/CR surg 206 P/F PVC shroud- 630A 207 P/F contact shroud for PT. 208 P/F rubber gasket for door 209 P/F bushing plate- VCB 210 P/F control fuse with assembly, 440V 211 P/F loose vacuum contactor [Electrically held] type JVE1-604. 212 P/F loose vacuum Contactor for soft starter MVC400D, 400Amp, 3.3KV, 2P, Control supply 220VDC, Solenoid type, with 3 economy resistance- CVC0004, 213 P/F electronic timer suitable in HT starter. 214 P/F Over current, Earth fault relay and short circuit protection relay and retrofitting if required. 215 P/F Under voltage/ Over voltage protection relay and retrofitting if required. 216 P/F Master trip relay and retrofitting if required. 217 P/F Trip circuit supervision relay and retrofitting required. 218 P/F auxillary relay for contact multification RE-300 Aux supply: 110V AC / DC 219 P/F auxiliary contactor for vaccum contactor operation 110VDC with resistor complete. 220 P/F limit switch for service & test position 2 Pole. 221 P/F tripping relay VAJH 3NO + 1NC, 110VDC 222 P/F selector switch for HT panel 223 P/F breaker operated switch 10 pole, 5NO + 5NC. 224 P/F power pack unit Input: 110V AC, Output: 110VDC 225 P/F On line UPS pure sine wave with standard features a 1KVA b 2KVA c 3KVA d 6KVA e 10KVA 226 P/F SMF battery a 12 V/17Ah -18Ah b 12 V/26Ah c 12 V/42Ah d 12 V/65Ah e 12 V/100Ah 227 P/F fixed resistor 1000 ohms. 228 P/F safety switch for VC HRC fuse P/F blow pole 1C/O 229 P/F connecting rods for safety switch 230 P/F safety switch for VC trunk Interlock 2 Pole NO + 1NC.231 P/F high voltage 3.6KV HBC fuse links for short circuit protection. 232 P/F and giving satisfactory test and trials of 3.3 KV 104Kvar Capacitor panel as per rate analysis. 233 P/F and giving satisfactory test and trials of 3.3 KV 208Kvar Capacitor panel as per rate analysis. 234 P/F MM30 type protection relay Machining and fabrication works for couplling of actuator and valve 235 P/F Universal joint 236 P/F Mounting bracket 237 P/F Flange 238 P/F Coupler 239 P/F Shaft coupler 240 P/F Additional shaft 241 P/F Fastener bolt, hardware, etc accessories 242 P/F 0.6mm GI sheet 243 P/F regular/ standard model Ceiling fan complete 244 P/F ISI mark modular type (two module) electronic step regulator for fan 245 P/F condenser 2.5 micro farad for ceiling fan 246 P/F anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. 247 P/F fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. 248 P/F fan hook of 10 mm. M.S. round bar grouted in RCC slab 249 P/F ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire 250 P/F heavy duty exhaust Fan 251 Refilling of fire extinguisher of by dismantling from site to workshop for refilling which includes removing of existing powder and cleaning the cylinder, delivery pipe , nozzle internally and refilling new powder complete with reinstalling properly at site 252 Dismantalling old rusted perforated type cable tray.253 P/F hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 100 mm width with necessary coupler plates and hardware in approved manner etc complete. 254 P/F, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity suitable to operate on 250V, 50 cycles, A.C.supply having 1 no of air handling unit hiwall / floor mounting type complete. 255 P/F, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete 256 P/Laying PVC insulated PVC round sheathed 2.5 sq.mm 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV 257 P/F copper pipe suitable for refrigeration system having size 12.7 mm complete. 258 P/F bracket for split type AC 259 P/F copper pipe suitable for refrigeration system having size 15.9 mm complete. 260 P/F Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 12 mm 261 P/F Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 16 mm 262 P/F rigid PVC pipe 20 mm dia.with PVC accessories for drain 263 Carrying out core cutting of size 3 to 5 dia x 15 length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. 264 Providing, Installation, Testing and commissioning of borewell type maintenance free chemical earthing comprising of Electrode of 80 mm diameter rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. 265 Providing, Installation, Testing and commissioning of borewell type maintenance free chemical earthing comprising of Electrode of 80 mm diameter rod of Length 1.5m along with 15 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. 266 Providing and making platform by making excavation for foundation, situ cement concrete of M-10, uncoursed rubble masonry of trap, rubble stone soling 15cm to 20dc thick including hand packing and compacting, situ cement concrete of M20 grade trap, steel bar rainforcement of various diameters for RCC work, sand faced plaster externally in cement mortar, etc complete 267 Providing hand drill Machine 268 Providing hand grinder 269 Providing Crimping tool up to 400sq.mm 270 Providing Insulator tester ( Megger ) cranking type having metal body of range 100 Volts 1000 Ohms 271 Providing fix spanner set 12 piece set 6 -32 mm 272 Providing Bi-hexagon Ring spanner 12 piece set 6 - 32 mm 273 Providing screw driver a Screw driver Engineering pattern 6 X 300 mm b Screw driver Engineering pattern 8 X 200 mm c Screw driver Engineering pattern 5 X 200 mm d Screw driver Engineering pattern 5 X 300 mm e Screw driver with green neon bulb line tester 3.6 X 60 mm 274 Providing Multimeter 275 Providing Tong Tester ( Clip on meter ) of range 0- 10-30-100-1000 Amps and 0-300-600 Volts 276 Providing Ball pen hammer with handle 800 gm 277 Providing Hack saw frame 300 mm size with heavy duty blade 278 Providing blower 279 Providing single phase welding machine 280 P/F fixing isolator suitable for 33KV capacity 281 Providing office regular with handle chair 282 Providing fabricated powder coated rack 283 Providing computer table 284 Providing 18 compartment steel clothes locker with powder coating, locking arrangement, etc complete. 285 Providing regular office wooden table 286 Providing wooden chair 287 Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8mm thick & Top in 2mm thick CRCA, Shutter to be mounted with the help of cuphinges, and adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns 288 Providing and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish 289 Providing & Arrangemnt of High Back chair, Synchronized Mechanism with Multiple Locking, Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery 290 P/F disc type insulator suitable for 33 KV line complete erected with suitable Hardware on provided cross arms as per IS. 291 P/F pin type insulator suitable for 33 KV line, complete erected with suitable hardware on provided cross arms. 292 P/F G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/8 SWG, G.I. stay rod 20 mm x 1.8 meter length and pole clamps duly erected in provided cement concrete foundation. 293 Providing and fixing Nut bolts and Sundries etc accessories 294 Making isolation circuit for all 3 phases and interlocking the same to provide 33KV output from 2 Nos of 33KV input feeders using accessories etc complete. 295 Dismantling the existing old 33KV circuits and all jumps, accessories, etc complete. 296 Providing and fixing safe shade ESE type lighting arrestor system complete with following details. a P/F safe shade ESE type lighting arrestor as per NFC17-102 (2011) UNE 211862011 standards, CPRI tested, area covered 107 Mtr, etc complete. b P/F GI mast 5mtr long wth base plate complete c P/F 6 Digit counter, etc complete d P/F accessories for lightning arrestor, etc complete. e P/F test link box etc complete. f Providing, laying and terminating single core 35sq.mm copper flexible cable for earthing 297 Providing and making overhead cablling works for clarifier bridge slipring a P/F slipring b Providing and laying copper conductor 1.5sq.mm X 4 core XLPE/PVC 1.1KV grade cable c P/F hardware, bobbin, anchor fastners, cork sheet etc accessories for slipring fixing works. d P/F GI wire of high purity of different sizes used for earthing. e P/F attachment to slipring for entering cable from top using GI pipes, coupling, flange, bend, by machining and threading the components so that cable will remain fix when clarifier is rotating. f Making arrangement using provided GI wire, bobbins to carry the provided cable overhead from filter to clarifier. g Making terminations for slipring main panel, clarifier panel, etc.Part B- Annual maintenance contract 1 Servicing and overhauling of APFC panels. A Servicing of APFC panel by making terminations of power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, tightening all connections, changing hardware, insulator, gasket, replacing provided blown fuses, fuse base, indicators and other parts as required in engineering manner for each bank complete as follows. a Control feeder for 1 to 5KVAR bank. b Control feeder for 5 to 10KVAR bank. c Control feeder for 10 to 20KVAR bank. d Control feeder for 20 to 30KVAR bank. e Control feeder for 30 to 50KVAR bank. B Servicing of main programmable logic controller injector module, ZCS module, by correcting dry solder, calibrations of three phase voltage, currents, all parameters, power supplies, tightening all connections, adjusting preset values to maintain unity power factor, checking transformer voltages, current ratios, checking of panel & cleaning of panel complete. 2 Servicing and overhauling of soft starters. Servicing of contactor by changing provided contact kits, coil, terminations, control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches, servicing of analog card, digital card, display card, correcting dry solder, calibrations of three phase voltage, currents, all parameters, power supplies, adjusting preset values, checking transformer voltages, current ratios, termination of incoming outgoing cables as required. Also tightening of connections, cleaning of panel complete. a 70 to 90HP. b 90 to 120HP. c 120 to 150HP. d 150 to 215HP. e 215 to 300HP. f 300 to 1000HP 3 Servicing and overhauling of starters. Servicing of contactor by changing provided contact kits, coil, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, push buttons, voltmeter, ammeter, selector switches checking oil level and top up, auto transformer links, termination of incoming outgoing cables as required. Also tightening of connections, setting of timers and cleaning of panel complete. a 3 to 7.5HP. b 7.5 to 12.5HP. c 12.5 to 20HP. d 20 to 30HP. e 30 to 50HP. f 50 to 70HP. g 70 to 90HP. h 90 to 120HP. i 120 to 150HP. j 150 to 215HP. k 215 to 300HP. 4 Servicing and overhauling of distribution panels. Servicing ,repairing of distribution panels by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, provided indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections of feeders of following capacity. a Up to 32A b 32A to 63A c 63A to 100A d 100A to 150A e 150A to 200A f 200A to 250A g 250A to 400A h 400A to 630A i 630A to 800A j 800A to 1000A k 1000A to 1250A l 1250A to 1600A 5 OCB to MCCB conversion. Dismantling output starter’s cable terminated to OCB, dismantling incoming and outgoing bus bar of OCB to main LT panel, dismantling OCB from main LT panel properly. Making iron frame for fitting of MCCB. Fitting of MCCB in main LT panel with proper hardware, covering the front open portion with 16SWG MS sheet with adjusting slot for MCCB handle. Terminating the R Y B connection of MCCB with main LT panel’s bus bar using appropriate rating of copper flexible cable and proper copper lugs. Reconnect the output’s starter cable to MCCB, taping all power connections, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches. Replacing indicators and other parts as required. Cleaning of panel, tightening of all connections. 6 Servicing and overhauling of actuator electrical control module. Servicing of actuator electrical control module by servicing of contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 7 Callibrating all presets/sensor for gate/screen with open/close and electronic indication system. Checking control wiring for remote and local operation, adjusting limit switches with proper close and open, giving satisfactory test and trials of remote and local system etc complete. 8 Servicing and overhauling of alum mixer control module. Servicing of alum mixer module by servicing of SFU, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 9 Servicing and overhauling of chlorine plant control module. Servicing of chlorine plant module by servicing of SFU, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 10 Servicing and overhauling of clarifier control module. Servicing of clarifier module by servicing of breaker, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 11 Servicing and overhauling of HT substation. a Servicing and overhauling of 4 pole structure, servicing air break switch by polishing contacts, applying jelly to contacts, alignment of AB switch, servicing and overhauling of D.O. set by polishing hansa and punja, applying jelly to all hansa and punja, changing fuse link tightening of connections, changing hardware, changing ACSR jumper links by properly lugging and binding using alkathene pipe. HT taping of connections, checking of insulators, insulation test of total installation and earth test of earthing pits. b Cleaning of substation area, painting of 4 pole structure , fencing and gate using aluminium paint and scraping old paint. Painting of transformers using AD gray paint and scraping old paint. 12 Servicing and overhauling of 33KV H.T. Substation at Gangapur Dam pumping station. a Servicing of air break switch by polishing contacts, applying jelly to contacts, alignment of AB switch, tightening connections, changing hardware, etc complete. b Painting of gantry structure for air break switch by cleaning all poles channels using aluminium paint 3 coats. c Servicing of D.O. set by polishing hansa and punja, applying jelly to hansa and punja, tightening connection, changing hardware and fuse wire, etc complete. d Painting of gantry structure for D.O set by cleaning all poles channels using aluminium paint 3 coats. e Servicing of PT by checking, lugging, tightening HT and earthing connections, checking, tightening secondary connections, measuring voltages at out put for main bus, bus-1 and bus-2. f Painting of gantry structure for main bus PT by cleaning all poles channels using aluminium paint 3 coats. g Painting of gantry structure for PT bus-1 and bus-2 by cleaning all poles channels using aluminium paint 3 coats. h Painting of PT for main bus, bus-1, bus-2 and MSEDCL by cleaning them and using smoke gray paint 3 coats. i Servicing of VCB by checking operating mechanism, alignment, applying jelly to various parts, control wiring, remote local operation, spring charging, insulation tests for main bus, bus-1 and bus-2. j Repairing servicing of control feeder panel for VCB/VC by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete. k Servicing of CT by checking, lugging, tightening HT and earthing connections, checking, tightening secondary connections, measuring currents at out put for main bus, bus-1, bus-2. l Painting of gantry structure for VCB and CT for main bus, bus-1 and bus2 by cleaning all poles channels using aluminium paint 3 coats. m Painting of VCB for main bus, bus-1 and bus-2 by cleaning them and using smoke gray paint 3 coats. n Painting of CT for main bus, bus-1, bus-2 and MSEDCL by cleaning them and using smoke gray paint 3 coats. o Painting of gantry structure for MSEDCL CTPT structure by cleaning all poles channels using aluminium paint 3 coats. p Painting of gantry structure for cut point by cleaning all poles channels using aluminium paint 3 coats. 16 Repairing of analog input module AI 2xI, 4-wire transmitter (+/-20 mA /13 bits+sign, 4 mA to mA/13 bits), standard 17 Repairing of analog input module AI 4xI, 2wire- MU(4..20mA), standard 18 Repairing of digital output module DO 8xDC24V/0.5A, supports isochrone mode 19 Repairing of power module PM-E for electronic modules, 24 VDC, with diagnostics 20 Repairing of digital input module DI 8xDC24V, supports isochrone mode 21 Repairing of IM151-8PN/DP central processing unit work memory 192KB; 0.06ms/1000 instructions; PROFINET connection; S7 communication (loadable FBs/FCs); PROFINET IO-Controller; supports RT/IRT; PROFINET interface and 3 ports; MRP; PROFINET CBA; PROFINET CBA-Proxy; transport protocol TCP/IP, 22 Repairing of Communication module with a serial interface (RS232, RS422 or RS485) and Modbus master log with 8 byte I/O interface 23 Repairing of Communication module with a serial interface (RS232, RS422 or RS485) and Modbus slave log with 8 byte I/O interface 24 Repairing of Programmable logic controller 1769 TW Digital input module 32 point. 25 Repairing of Programmable logic controller 1769 Analog input module 8C 0-10V 0-20 26 Repairing of Programmable logic controller 1769 Digital output module 32 point. 27 Repairing of Programmable logic controller 1769 Power unit. 28 Repairing of Programmable logic controller 1769 Compact I/O to DSl module. 29 Repairing of Programmable logic controller 1769CMPAC Logix processor ethernet 2MB 30 Repairing of Programmable logic controller 1969 Endcap right. 31 Inhouse Programmable logic controller software devlopment charges. 32 On site commissioning of hardware, testing the complete system, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of control cables as required. Cleaning of panel, tightening of all connections, etc complete. 33 Servicing and overhauling of programmable logic controller panels complete system. Servicing ,repairing of programmable logic controller panels by checking software routine, debugging software, analysing the ladder diagrams, checking hardware and relay module, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of control cables as required. Cleaning of panel, tightening of all connections, etc complete. 34 Repairing, servicing of electromagnetic flow meter a P/F main kit PCB b P/F single card c Panel weather proof including internal wiring and components d Service charges e Setting and callibration of flow meter 35 Reparing of On line UPS pure sine wave by dismanteling, trasportation and reinstalling after repairing complete. a 1KVA b 2KVA c 3KVA d 6KVA e 10KVA 36 Servicing of DG control panel by servicing of EPU unit, battery charger, setting of timer, making control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware procured from material list like voltmeter, ammeter, selector switches, connector, MCB, indicators, push buttons. Also tightening of connections and cleaning of panel complete. 37 Servicing and overhauling of battery charger panel Servicing and overhaulling of battery charger panel by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, provided indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections, cleaning of battery terminals, checking battery voltages, battery cable lugs, etc complete 38 Servicing of RO/UV/UF water purifier by changing/cleaning of carbon filter, pre filter, sedement filter candles, cleaning of water purifier etc complete. 39 Repairing in point wiring wiring for light fan instrument with ISI mark 2-1sq.mm, copper wire PVC insulated 1.1KV grade with necessary accessories as required complete. 40 Repairing in power point wiring with ISI mark 2-1.5 sq.mm, copper wire PVC insulated 1.1KV grade with necessary accessories as required complete. 41 Repairing of board with necessary accessories as required complete. 42 Installation of transformer with loading, unloading, transportation 43 Carrying out necessary tests before and after charging transformer upto full load to satisfaction by connecting earthing, incomming and outgoing cables etc complete. 44 Providing minor repairs to existing plumbing system. 45 Providing major repairs to existing plumbing system. 46 Tracing out fault in cable/cable kit/cubical, removing the connection of cable, taking insulation test. After fixing new cable/cable kit, making termination of the cable again taking insulation test and giving satisfactory test and trials, etc complete. 47 Dismantalling temporary hangging wires accessories, etc complete. 48 Chiselling of wall for laying cable / mains, clamping it properly and refilling the broken wall by using POP etc complete. 49 Repairing, servicing of synchronization panel by servicing of contactor by changing provided contact kits, coil, servicing of electronic controller, control relays terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, push buttons, voltmeter, ammeter, selector switches, termination of incoming outgoing cables as required. Also tightening of connections and cleaning of panel complete. 50 Annual Maintenance Contract for Power Genset includes routine check-up visits with following scope of work and all breakdown visits including spares and major repairs throughout the year. A 82.5KVA Gangapur Dam Pumping Station B 140KVA Shivaji Nagar WTP. C 250KVA Dwarka Pumping Station D 250KVA Gopalnagar Pumping Station E 400KVA Chehedi Pumping Station F 400KVA Nasikroad WTP. G 400KVA Gandhinagar WTP. H 400KVA Nilgiribag WTP. I 600KVA Panchavati WTP Scope of worka B check kit (oil filter set, fuel filter set) shall be changed as required. b Engine oil 15W40 suitable for genset shall be changed as required. c Air cleaner element shall be changed as required. d Coolant shall be filled and top up as required. e Checking temperature, removing leakages, checking battery voltage, battery charging voltage, output voltage, frequency, AVR, tappet setting for good performance of genset. f Routine checkup visits should be done monthly. g Apart from above scope of work all major works to be carried out including all spares of generator excluding panel, batteries as and when required through out the year except total engine failure, natural disaster like flood etc. 51 Transformer oil filtration 52 Making trench in soft soil for laying provided cable 53 Breaking bituminous/ concreate road by JCB/Tractor breaker complete. 54 Providing and casting in situ cement concrete M-15 / 1:2:4 of trap / granite / quartzite / gneiss metal, moulded or chamfered as per drawing or as directed for coping to plinth or parapet, including centering, form work, compacting, covering newly laid concrete by gunny bag, plastic or tarpaulin, roughening them if special finish is to be provided and curing and finishing if required etc. complete. (The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Wooden planks / shuttering will not be allowed) 55 Providing and laying jointless a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee- LM @ 700 gms/Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/Square Metre and finishing complete. 56 Repairing, servicing of crane panel by servicing forward/reverse contactor. Checking control wiring, adjusting limit switches, giving satisfactory test and trials of control systems etc complete. 57 Dismantling, disconnecting connections of all cables of ATS starters as fer following details. a Up to 80 HP. b 80HP to 200HP c 200HP to 300HP. 58 Erection of ATS starter panel at desired place including loading unloading and transportation and grouting it properly, etc complete as fer following details a Up to 200 HP. b 200HP to 300HP. 59 Annual Electrical inspection, compliance, test reports of earthing, insulation test etc complete for substation. 60 Annual Maintenance Contract for surge arrestor includes routine checkup visits with following scope of work and all breakdown visits including all spares and major repairs throughout the year etc complete. a Checking of surge arrestor pnumatic system by checking valve, pressure gauge, level gauge, solenoid valve, servicing of surge arrestor tank component, giving test and trials of automatic functioning of magnetic level sensors, checking all pressure etc complete. b Checking of compressor piston ring, gasket, shaft, filter, oil seal, oil ring, discharge valve, inlet valve, oil filling/top up and giving satisfactory test & trials of compressor. i Compressor No-1 ii Compressor No-2 c Checking of control panel for surge arrestor unit by checking terminations, power and control wiring, lugs, tie, saddle, ferrules, bus bars, hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches. Cleaning of panel, tightening of all connections etc complete. 61 Repairing servicing of VCB/VC by checking operating mechanism, alignment of contacts, applying jelly to various parts, tightening all connections, polishing contacts, checking auxiliary contacts, closing coils, terminal strips, VCB/VC operation, insulation tests and giving satisfactory test and trial complete. 62 Repairing servicing of control feeder panel for VCB/VC by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete. 63 Repairing servicing and attending breakdown of CG Lucy unit by checking operating mechanism, alignment of contacts, applying jelly to various parts, tightening all connections, polishing contacts, checking fuses, top up oil level, oil BDV test, CG Lucy operation, insulation tests and giving satisfactory test and trial complete. 64 Servicing of OLTC by checking operating mechanism, alignment, applying jelly to various parts, checking of control panel operations and replacement of provided indicators, switches, control fuses, hardware, insulator, gasket, polishing contacts, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete.
Contract Date: Jun 10, 2026 Contract Value : 94.40 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
34.
Health and Family Welfare #11254887 AOC
Bids Are Invited For Condenser Blade - Material In Plastic Suitable For Split Ac 2 Ton Size 17Point5 , 4 Mfd Capacitor - Capacity Type 4 Mfd Material Type Copper Shape Type Round Connection Type Wired , Samsung Timer - Body Material In Plastic Voltage 120V In Refrigerator Samsung Timing Approx 9 Hours 40 Min Comp 12 Min Heater Product Capacity Above 250 Litres Of Double Door Refrigerator , White Wrapping Tape - Adhesive - Rubber Base Material - Pvc Type - Non Adhesive Suitable For Copper Clubbing Each Nos 15 Meters , Teflon Tapes - Material Poly Tetra Fluoro Ethylene Features Heat Resistance Each Nos 10 Meters , Cello Tape 2 Black - Colour Black Material Biaxially Oriented Polypropylene Uses Wrapping Of Ac Copper Pipes And Packing Purpose , Cotton Waste - Colour White , Danfoss Relay Set 20 Deep Freezer - Connector Type Through Hole Contact Type Normally Open Mounting Type Din Rail Mount Operation Mode Automatic , 80 By 100 Mfd Capacitor - Capacity 80 By 100 Mfd Voltage 275 Vac 50 Hz , Minus 20 Deep Freezer Square Type - Fan Type Square Voltage 220 V, 50 Hz Wattage 65 Watts Heat Sink Material Copper , Pin Remover Charging - Item Is Valve Core Remover Installer Material Type Copper Service Ports Is 1 By 4Inch And 5 By 16 Inch Sae Female Bypass Ports Is 1 By 4 Inch Sae Male , Thermostat Minus20 - Model Wpf 20 250 V 4 Of 6A 50 Or 60 Hz Suitable For Minus20 Deep Freezer Vertical , Relay Danfoss - 103N0021 25Ohm 463 220V 240V , Capacitor 4 Mfd - Capacity 4Mfd 280 V Ac 10000H Ki 8 50 Or 60 Hz Material Shape Round Type , Condenser Fan Blade For 2 Ton Llyod Ac - Material Plastic Suitable For Split Ac 2 Ton Size 17 Point 5 , Pinch Pliers - Color Multicolor Primary Material Ss , T Handle 10Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , T Handle 12Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , Sand Paper - Color Brown 80 Grit , 1 By 4Inch Ratchet - 3 By 16 Inch And 1By4 Inch Square X 1By2 Inch And 9By16 Inch Hex Ratcheting Refrigeration Wrench , Refrigerant Recovery Plier - 1By4 Sae Interface Material Ss , Allen Key Set In Inches - Item 10 Pack Of Allen Key Material High Grade Alloy , Cold Room Evaporator Fans - Make Hi Cool Model 4E 450S 230 V 50 Hz 1Point15a 155 Or 250W 1350 R By Min Axial Fan Motor Warranty 1 Year , 8 Mfd Capacitor - Body Material Metal, Connection Type Wired Voltage 440 Vac 50 Hz , Nose Pliers - Make Taparia Material Carbon Steel Handle Material Plastic Rubber Steel , Wire Cutter - Harden 7Inch Professional Electric Wire Cutter Stripper Made Of Zinc Alloy And Supports Wire Diameter Range 4 Mm Features Cut And Stripping Line Two-In-One Product Combined With Cut Line And Stripping Two-In-One Powerful And Durable Ergonomic Designed Handle Multipurpose Wire Stripper Under The Tangent Mouth Design Tangent Convenient Sharp And Durable Save Labor Force Spring Design Mached With A Length Of 47Mm Gun Mouth Convenient And Quick Efficient Adjustable Knob Wire Stripping Force Can Be Adjusted By The Knob Size To Avoid Excessive Damage To The Wire And Cable Ergonomic Handle According To The Human Body Design Feel Comfortable And Durable , Charging Line R32 - Make Value Material Brass 3Pc Charging Hose Suitable For R32 Gas Charging , Two Way Manifold Gauge With Box And Hose - Make Value Model No Vmg2 R410a 02 Pressure Range 30 500Psi Low 0 800Psi High Hose Red And Blue And Yellow 1By4inch 1By4inch 3X1pc , 46 Pcs Set - Make Stanly 46Pcs 1By4 Inch Drive Box End Socket Set Metric Ratchet Wrench Set With 4 To 14Mm Cr V Sockets S2 Bits Extension Bars Material Ss , Cylinder Key - Material Ss , Tourch For Butane Gas Cylinder - Make Clix Nozel Single , Swaging Tools - Swage For 1By4inch 5By16inch 3By8inch 1Byinch 5By8inch 3By4inch 7By8inch , Rough File With Handle - Make J K Thickness 3 Mm Material High Carbon Steel Width 12 Mm Length 100 Mm , Double End Spanner Set 6X32 Mm - Make Taparia Size 6Mm To 32 Mm Type End Type , T Set 13Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , T Set 14Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , Drain Line Spring - Length 30 Meters Material Steel Color Silver Packaging Size 30 Meters , Single Gauge High Side - Make Value Model Vmg 1S H Pressure 0To800 Psig Material Brass , Measuring Tape 5 Meters - Make Stanly Coating Tylon Blade Lengh 5 Meters Body Material Rugged Rubber , Expansion Valve For Cold Room - Make Model Erse 4C Body Machined Brass Bar Seat Brass Port Machined In Body Pin Stainless Steel Pushrod Stainless Steel Type Of Joints Knife Edge To Metal Connections Odf Copper Fittings Silver Soldered To Body Inlet Strainer No Strainer Suitable For R 22 Refrigerant , Condenser Motor - Make Llyod Model Ydk68 6Bl Kw68b Rpm 900 Rotation Ccw , Condenser Blade - Material Plastic Suitable For Split Ac 1Point5 Ton Size 16Inch , Capacitor 3 Mfd - Body Material Plastick Connection Type Wired Voltage 440 Vac 50 Hz Capacity 3Mfd Shape Round , Digital Temp Meter - Make Hitcahi Model No Hd 306 Humidity Range 0 To 100 Rh Temperature Range Minus20c To Plus200c) Warranty 1 Year , Samsung Heater - Uses Refrigerator Heater Size 14 , Timer - Model Td20 Csa Power 220V 50 Hz Number Of Terminals 4 , Condenser Fan Blade - Material Plastic Suitable For Split Ac 2 Ton Size 17Point5inch , Valve 3By8inch Hand Shut Off - One Side 1By4inch Male Flare Other Side 3By8inch Male Flare Material Fully Brass With Handle , Cylinder Valves - Model Cga 320 Type Handle Material Brass Outlet 1/4Inch , Condenser Motor - Ge Motor Cpn 2Az0 10To 090Coma 920 Rpm Cwse 1By5 Hp , Fan Blade - Material Aluminum Suitable For The Ge Motor Cpnto2az0 To10to090 Size 19Inch , Hand Cutter Blade Iron - Size 4Inch 107X1point0x16 Mm 4Inchx3by64inchx5by8inch 15300 Rpm Double Net Max Speed 80 Ms Metal Cutting Wheels , Adjustable Wrench 6Inch - Make Taparia With Rubber Grip Size 6Inch , Adjustable Wrench 8Inch - Make Taparia With Rubber Grip Size 8Inch , Adjustable Wrench 12Inch - Make Taparia With Rubber Grip Size 12Inch , Allenkey Set Mm - Item 10 Pack Of Allen Key Set Material High Grade Alloy , Flaring Tools Set With Box - 1 X Flaring Tool 1 X Inch Pipe Clamp 1 Xmetric Pipe Clamp 1 X Pipe Cutter 1 X Pipe Deburring Tool Material Ss , Smooth File With Handle - Make J K Size 10Inch Width 25 Mm Thickness 5Point8 Mm , R22 Charging Line - Make Value Material Brass 3Pc Charging Hose Suitable For R22 Gas Charging , T Handle Only 1By4inch - Handle Length 12Inch Material Ss , Multitec Screw Driver - Ph1 And S5 Ph0 And S3 In Reversible Configuration Chrome Plated Finish , T Handle 8Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 8Inch , T Handle 11Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 11Inch , T Handle 13Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 13Inch , Tube Cutter - Make Value Model Vtc-42 Tube Diameter 1By4inch 1 5By8inch 6 To42 Mm , Flare Nut 3By4inch - Material Brass Size 3By4inch , Square Type Condenser Fan Motor - Power 230 V Watts 36W Rpm 1500 Rpm With Stand And Blade , Tong Tester With Probes And Leather Cover - Make Fluke Model 302 Type Digital Ac Clamp Meter Jaw Opening Size 30 Mm Voltage Range Dc 0To600v Current Range Ac 0To400 A Voltage Range Ac 0To600 V Power 2 Aa Batteries 1Point5v Resistance Range 4000 Ohm Warranty 1 Year , Screw Driver Long - Make Taparia Model 931 Type Long Handle Tip Type Phillips Usage Household Product Type Screwdriver , Hammer With Wooden Handle - Make Taparia Made From High Grade Chrome Vanadium Steel Is 841 1983 Weight 500 G Type Ball Pein , Cutting Plier - Maketaparia Model 1621To8or1621to8n Combination Pliers , Tube Cutter Small - Cutter Size 1By8inch To 5By8inch Material Ss , Hexa Frame With Blade - Make Stanly , Evaporator Fan Motor For Lg Refrigerator - Make Lg Electronics Model Rda082e03 Rohs Pno Eau41681402 Ac230v Or 50 Hz 0 Point 20 By 1300T Refrigerator Model No Gl 365Yvqg5 Dsuzebn , Condenser Copper Coil Make Llyod - Copper Condenser Coil For The Llyod 1Point5 Ton Ac Size 20X30 Inch , Filter - Material Copper Type 2 Way , Single Pressure Gauge High Side500psi - Make Wikai Pressure Range 0To800 Psig Material Brass , Gauge Value - Make Value Model Vmg1slr32 Pressure 0To350 Psig Material Brass , Danfos 20 Relay Olp Set - Connector Type Through Hole Contact Type Normally Open Mounting Type Din Rail Mount Operation Mode Automatic , Try Square Set - Size 6Coma8coma10 Inch Material Carbon Steel Blade 90 Degree Heavy Duty Right Angle Ruler , Valve Core Removal Tool - Item Valve Core Remover Installer Material Copper Service Ports 1By4 Inch And 5By16inch Sae Female Bypass Ports 1By4inch Sae Male , Digital Vernier Callipers With Batteries - Material Stainless Steel Measurement Accuracy Plus Or Minus 1Percent , Siron Soldering Iron Set - Make Siron Model Dss60 Voltage 24V Power 60W Temperature Range 150 To 480 Degree Centigrade , Soldering Wire - Package Spool Type Wire Solder Wire Gauge 24 And 25 Awg Process Leaded Weight 500G , Compressor Cable Kit - Cable Feature Heat Resistance Features Both Side Clips Each Wire 2Point 5 Sq Mm Copper Cable , Handset Valve 1By4inch - One End 1By4inch Sae Female Flare The Other End 1By2 Acme Male , Cuppler - Size 1By4inch And 3By16inch Material Ss , 24 Socket Wrench Set Ratchet - Make Stanley Piece 1By2 Inch Drive Sliding Tee 1 Piece 1By2 Inch Drive Universal Joint 18 Pieces 1By2 Inch Drive 6 Point Sockets 10 Mm 11 Mm 12 Mm 13 Mm 14 Mm 15 Mm 16 Mm 17 Mm 18 Mm 19 Mm 20 Mm 21 Mm 22 Mm 23 Mm 24 Mm 27 Mm 30 Mm 32 Mm Box Included 1 Piece 1By2 Inch P9 Ratchet 2 Pieces 1By2 Inch Drive Extensions 130 Mm And 250 Mm 1 Piece 12 Inch Drive Spark Plug Socket 21 Mm , Pin Valve - Valve Type Pin Valve Exterior Finish Copper Outlet Connection Flange Material Copper 1 Packet 10 Nos , Charging Line Handle - Air Conditioner Refrigerant Angled Ball Valve 1By4inch Sae For R410a R134a R12 R22 Ac Hvac With R410a Adapter R134a Refrigerant Adapter Valve Core Thimble Remover For Mini Split System Material Brass Inlet Connection Size 0Point25 Inches Inlet Connection Type Npt Outlet Connection Type Sae Number Of Ports 3 Outlet Connection Size 0Point25 Inches Valve Type Ball Valve , Capacitor 50 Mfd - Capacity 50 Mfd Material Non Pcb Shape Round Mounting Type Internal , 3 Way 30 Amps Connector - Current Ratings 30 Amps Connector Type Screw Material Bakelite High Current Capacity , Ss Tank Nipple 1By2inch - Material Brass Thread Size 15 Mm Item Dimension Lxwxh 15 X10 X 5 Cm , Pvc Connection Pipe 1 By 2 Inch - 24 Long Brasstail Nut Connection Pipe With White Pvc 15Mm 1By2 Inch Hosepipe 60Cm , Ro Water Purifier T Type Tap - Colour Blue For The Ro Water And Material In Plastick , Ro Water Purifier Tap Tank Kent Type - Color Blue Material Plastick , Charging Line Rubber - High Quality Grade Rubber 1 Packet Equalto 50 Nos , Pipe Wrench 16Inch - Make Taparia Model 1273To12 , Bearings - 6201Z , Oil Seal - 25 47 7 A 1 Oil Seal Rajson Enterprises , Ss Breazing Roads - World Class Welding Electrodes Super Stainless Steel 308L Size 3Point15 X 350 Mm , Bluestar Indoor Blower For 1Point5 Ton Sac - Length 25Point3 Inch , Line Tester - Make Taparia Model 813 , Screwdriver Small - Make Multitec Model R6100i Type Insulated Shank Size Hexagon 6 Mm Length Of Bit 150Mm , Screwdriver Large - Make Multitec Model R6250i Type Insulated Shank Size Hexagon 6 Mm Length Of Bit 300Mm , Handle T - Make Taparia Model Takm9 , Jet Pump Handle Small - Hoselength 8M And Waterflow Rateof 8 Lperh Portable Maxium Pressure 300Bar , Araldite 500Gms - Weight For 180G The Each , Double Ended Ring Spanner Set - Make For The Taparia Size 6Mm To 32 Mm Type Ring Type , Single Guage Low Pressure For Vaccume - Make Value Model Vmg 1 S L Pressure 0To350 Psig Material Brass Suitable For R22 Refrigerant , T Type Handle Spanner Set - This Set Includes Seven Metric Sizes 8 10 12 13 14 17 And 19 Mm T Handles , Continuity Tester Compressor Check - Power Source Battery Style Digital Sound Yes Beep , Servicing Covers - Material Polyvinyl Chloride Color Blue Or Black Water Resistant Yes , Compressor For 345 Liters Refrigerator - Make Samsung Or Equivalent Model Number Mk172k S1u Refrigerant R134a Phase Single Type Rotary Warranty 1 Year , Electrical Relay - Relay With 5 Mfd Capacitor , Compressor For Minus20 Deep Freezer 320 Liters - Make Voltas Or Equivalent Model Number F60nl Refrigerant R290 Phase Single Warranty 1 Year , Compressor For 165 Liters Bpl Make Refrigerator - Makebpl Or Equivalent Model Number Sl19j-5 Refrigerant R12r134a Phase Single Warranty 1 Year , Compressor For Minus20 Deep Freezer 350 Liters - Make Danfoss Or Equi Model Nl9f And Refrigerant R134a Phasesingle And Warranty 1 Year , Filter Drier Pencil Type - Material Copper Type 2 Way For 134A Refrigerant For Minus20 Deep Freezer , Compressor For -20 Deep Freezer 500 Liters - Make Danfos Or Equivalent Model Numbersc12g Refrigerant R134a Phase Single Warranty 1 Year , Compressor For 1Point5 Tr Split Ac Rotary Type - Make Sci Or Equivalent Model Number- Rh313vamt Refrigerant R22 Phase Single Type Rotary Warranty 1 Year , Side Dummy Nuts 5By8inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 5By8inch , Side Dummy Nuts 1By2inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 1By2inch , Side Dummy Nuts 1By4inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 1By4inch , Side Dummy Nuts 3By8inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 3By8inch , Dummy Nuts 1By4inch - Hexagonal Brass Forged 1By4inch Flare Dead Nut , Ductable Split Ac Indoor Blower - Size 226X155 Suitable For 5Point5 Tr Duct Able Ac , Rubber Bushes - Type Star , Minus20 Deep Freezer Compressor - Make Embraco Or Equivalent Model Nek2150gk Warranty 1 Year , Drier Cum Filter - Make Danfoss Model 023Z5004 Size 1By4inch Brazing Type , Refrigerant R 600A - Make Godrej Of Skf Specific Name R600a Gas Type Hydrocarbon Packaging Size 200G , Hand Shut Valve For R600a Portable Cylinder - Material Brass R600a Gas Can Tap Valve With Handle Uses For Portable Gas Cylinder , Water Pipe Pvc - Flexible Water Pipe Pvc Durable Flexible Ant Kink , Acetylene Cylinder Regulator - P1 Equalto 30 Bar P2 Equalto 4 Bar Q1 Equalto 1Point9 M Per H Two Stage Gas Regulator Pressure , Oxygen Cylinder Regulator - P1 Equalto 100 Bar P2 Equalto12 Bar Q1 Equalto 30 M Per H Two Stage Gas Regulator Pressure , Hose Pipe For Acetylene - Color Red Material Rubber Brass Iso Standards , Hose Pipe For Oxygen - Color Red Material Rubber Brass Iso Standards , Torch For Oxygen Acetylene Cylinder - Uses Brazing Of R And Abyc Equipments With Iso Standards , Clamps For Hose Pipes - Size 1By2 Inchs Material Brass Uses For Hose Pipe Clamping , Hand Hacksaw Bladed - 14Inchx1inch 0 Point 050 , Axial Fan Motor For Hitachi 16Point5 Ton Ac - Make Hicool Model 4D 630S Size 25Inch 630Mm Voltage 415 Vac Power 815 Watt Current 1Point6 Amps Speed 1320 Rpm Air Direction Suction Warranty 1 Year , Compressor For Ice Machine 120 Kg Per Hr Production - Make Cubigel Or Equivalent Model No Gp14tb Refrigerant R134a Power 3By8 Hp , Filter Cum Drier - Type Brazing Size 1 By 4Inch , Compressor For Bluestar Split Ac 1Point5 Ton - Make Mistubishi Ics Or Equivalent Model Rh313vadt Refrigerant R22 Capacity 1Point5 Ton , Capacitor 45 Mfd - Capacity 45 Mfd Material Non Pcb Shape Round Mounting Type Internal , Capillary Tube Gauge - Make Refco For Measuring Capillary Inside Diameters , Soldering Liquid Flux - Uses For Stainless Steel & Multi Metals Soldering Packaging Size 100Gm , Blower For Lloyd Make Split Ac 1Point5 Ton - Size 34 1By4inch Or 87 1By2inch Cm Suitable For 1Point5 Ton Lloyd Split Abyc , Pvc Pipe 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Bends 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Pipe 1Inch - Size 1 Inch Material Pvc Conduit Color Grey , Pvc Bend 1Inch - Size 1Inch Material Pvc Conduit Color Grey , Clamps 3By4inch - Material Upvc Size 3Byinch 1 Packet 100 Nos , Clamps 1Inch - Material Upvc Size 3By4inch 1 Packet Equalto 100 Nos , Pvc T Joint 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Solvent - Hp 901 Pvc 50 Ml Packaging Size 50 Ml , Cutting Machine Blade - 105 Mm 105X1x16 , Vc T Joint 1Inch - Psize 1 Inch Material Pvc Conduit Color Grey Total Quantity : 655
Contract Date: Ref. Documents Contract Value : 10.10 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 1
36.
Rural Development #11250007 AOC
Tender for Providing, Erecting And Supplying Various Different Electric Material For 1 Year @Gr Anchayat Kadamwakwasti , Electric Material This Rate Please Mentioned Include Gst Invoice Shall Be Prepared With Gst Tax Whatever Applicable On Material Rate Are Mentione With Gst , Supplying And Erecting Modulartype Switch6a / 10A Isimark Approved Make Duly Erected On Provided Plate And Box With Wiring Connections Complete. , Supplying & Erecting Ms Pole Bracket For Guarding/Lt Oh Line, Fabricated From Angle Iron 50X50x6 Mm And 550 Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6mm Clamp Complete As Per Specification No. Oh -Pl/Bkt , Making Cement Concrete Foundation Including Excavation (60 X 60 X 150) Cm Deep In 1:3:6 Cement Concrete 20 X 25 Mm Stone Metal, (45 X 45 X 45) Cm /45 Cm Dia. X 45 Cm Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. (Above 6 M To 9 M Poles) , Supplying And Erecting Steel Tubular Swaged Pole 139.7 X 114.3 X 88.9 Mm. Dia With 4.5X3.65X3.25 Mm Thickness (4.5 + 1.75 + 1.75M) Length Respectively And Total 6 M Long With Pole Cap, Base Plate In Provided Foundation.(Weight 101 Kg.) As Per Specification No. Oh-Pl/Stp , Supplying And Erecting Steel Tubular Swaged Pole 139.7 X 114.3 X 88.9 Mm. Dia With 4.5X3.65X3.25 Mm Thickness (4.5 + 1.75 + 1.75M) Length Respectively And Total 8 M Long With Pole Cap, Base Plate In Provided Foundation.(Weight 101 Kg.) As Per Specification No. Oh-Pl/Stp , Supplying And Erecting Steel Tubular Swaged Pole 165.1 X 139.7 X 114.3 Mm. Dia With 4.5 X 4.5 X 3.65 Mm Thickness ( 5 + 2 + 2M ) Length Respectively And Total 9 M Long With Pole Cap, Base Plate In Provided Foundation (Weight 147 Kg) As Per Specification No. Oh-Pl/Stp , Supplying And Erecting Steel Tubular Swaged Pole 165.1 X 139.7 X 114.3 Mm Dia With 4.5 X 4.5 X 3.65 Mm. Thickness (5 + 2.5 + 2.5 M) Length Respectively And Total 10 M Long With Pole Cap, Base Plate In Provided Foundation (Weight 160 Kg) As Per Specification No. Oh-Pl/Stp , Supplying And Erecting Steel Tubular Swaged Pole 165.1 X 139.7 X 114.3 Mm Dia. With 4.5 X4.5 X3.65 Mm Thickness (5.60 + 2.7 + 2.7 M) Length Total 11 M Long With Pole Cap, Base Plate In Provided Foundation (Weight 175 Kg.) As Per Specification No. . Oh-Pl/Stp , Supplying And Erecting Street Light Bracket For Erection Of Single Fitting On Tubular Welded Pole With 40 Mm. Dia 1.0 M Long B Grade G.I. Pipe Along With Pole Cap Of 125Mm Dia 600 Mm Long Duly Welded As Per Specification No. Fg-Bkt/Bpc , Supplying, Erecting & Marking Dpmcb 40A To 63A, B- Series (For Lighting) In Provided Distribution Board As Per Specification No. Swswr/Mcb , Supplying And Erecting Insulated D.P. Switch Surface Type/Flush Type 32A 240Vwith Indicator Lamp & Fuse , Supplying And Erecting Programmable Digital Almanactimer Microcontroller Based With Real Time Clock To Operate On Derived Switching On & Switching Off Street Light As Per Daily Sunset And Sunrise Respectively , Supplying Pvc Insulated Pvc Round Sheathed 1.5 Sq.Mm (30 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv , Supplying And Erecting Pvc Insulated Pvc Round Sheathed 2.5 Sq.Mm (50 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv , Supplying And Erectingled Street Light Fitting Suitable For 26W To 36W Led Street Light, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Bajaj , Supplying And Erecting Led Street Light Fitting Suitable For Above 40W To 48W Lamp, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification No Bajaj. Fgodf/Fls2. , Supplying And Erecting Led Street Light Fitting Suitable For 60W Lamp, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete As Per Specification Bajaj No Fg Odf/Fls-2. , Supplying And Erecting Led Street Light Fitting Suitable For Above 70W- 75 Lamp, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg-Odf/Fls2 , Supplying And Erectingled Street Light Fitting Suitable For 90 W Led Street Light, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Bajaj , Supplying And Erecting Led Street Light Fitting 100W, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg-Odf/Fls-2. , Supplying And Erecting Led Street Light Fitting 120 W, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg-Odf/Fls-2. , Supplying And Erecting Led Street Light Fitting 150 W, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg-Odf/Fls-2 , Supplying And Erecting Led Flood Light Fitting Of 120W, Including Lamp, With providing fixing 0.95,Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg Odf/Fls-2 , 2-5-17 Supplying And Erecting Led Flood Light Fitting Of 150W, Including Lamp, With providing fixing 0.95,Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg-Odf/Fls-2 , Supplying And Erecting Street Light Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6M. In Length Along With Pole Cap Of 300 Mm Length And 80 Mm Dia Duly Welded With Provided Leads As Per Specification Jno. Fg-Bkt/Bpc(2-9-2) , Supplying And Erecting Street Light Wall Bracket Made From 25 Mm. Dia ‘B Class G.I. Pipe 1.2 M In Total Length Complete As Per Specification No. Fg-Bkt/Wb(2-9-3) , Supplying & Laying Pvc Armoured Cable 4Core 6Sq Mm , Supplying & Laying Pvc Armoured Cable 4Core 10 Sq Mm 7-1-15 , Supplying & Laying Pvc Armoured Cable 2Core 10 Sq Mm , Supplying & Laying Pvc Armoured Cable 2Core 6 Sq Mm , Supplying & Laying Pvc Armoured Cable 4Core 16 Sq Mm , Supplying & Laying Pvc Armoured Cable 4Core 25 Sq Mm , Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core 70 Sq. Mm. Aluminium Conductor , Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core 95 Sq. Mm. Aluminium Conductor , Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core 120 Sq. Mm. Aluminium Conductor With Continuous , Supplying, Erecting & Marking Spmcb 6A To 32A, B- Series (For Lighting) , Supplying, Erecting & Marking Dpmcb 6 A To 32 A Bseries (For Lighting) , Supplying, Erecting & Marking Fpmcb 40A To 63A In Provided Distribution Board , Supplying & Erecting Crimping Type Aluminium Lugs For Cable Upto 16 Sq Mm Complete , Supplying & Erecting Crimping Type Coper Lugs For Cable Upto 1.5 To 6Sq Mm Complete... , Supplying And Erecting Two Pole Power Contactor 250V 32A For Time Switch Complete Erected On Wooden Block/Provided Box, With Necessary Materials. , Supplying & Erecting Mains With2x1.5 Sq.Mm F.R Copperpvc Insulated Wire Laid In Provided Conduit/Trunking/Inside Pole , Supplying & Erecting Mains With 2X4 Sq.Mm F.R Copper Pvc Insulated Wire Laid In Provided Conduit/Trunking/Inside Pole/Bus Bars Or Any Other Places. As Per Specification No: Gma/Bw , Supplying And Erecting Mains With Isi Mark Wp2 X 6 Sq. Mm. 1100 V. Grade Aluminium Pvc Insulated Pvc Sheathed Wires On G.I. Bearer Wire No. 8 Swg 1-4-3 , Supplying And Erecting Mains With Isi Mark Wp2 X 2.5 Sq Mm. 1100 V. Grade Aluminium Pvc Insulated Pvc Sheathed Wires On G.I. Bearer Wire , Supplying And Erecting Mains With Isi Mark Wp2 X 10.00 Sq Mm. 1100 V. Grade Aluminium Pvc Insulated Pvc Sheathed Wires On G.I. Bearer Wire , 25 Amp, 32 annual periodical maintenance Three Phase L/T Contactor , Insulation Tape , Water Proof Tape , Cable Joint Kit Upto 25 Sq. Mm Cable , Cable Joint Kit Upto 35Sq. Mm To 95 Sq Mm Cable , Cable Joint Kit Upto 120Sq. Mm To 185 Sq Mm Cable , Cement Street Light Pole Clamp With Nut Bolt , M.S. Street Light Pole Clamp With Nut Bolt , Servicing And Primary Maintenance Of Street Light Pole 1 Visit Per Month Pole Included And Also Call Basis. Checking All Wire Connections, Nut Bolt Tighting, Lugs Connection. Old Light Changing & Service Wire Conection Labour Works Etc. , Supplying And Laying (Including Excavation Of Suitable Width & Depth Up To 90 Cm) 50 Mm Outside Dia. Double Wall Corrugated Pipes(Dwc) Of Hdpe For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete. , Servicing And Primary Maintenance For Street Light Pole. , Light Poles Painting In Silver Colour , 26W Led Light To 100W Led Light Repairing , Old Pole Shifting, Rework And Foundation Work Per Pole Etc. , Supply &Fixing Of Shakle Hardware With Nut Bolt , Supply And Installation Of Mini Feeder Pillar With Stand , Reinforced Cement Concrete Road Cheasling Charges With Tractor Breaker (1 Hours) , Tree Triming For Overhead Line , Supplying & Erecting Street Light Control Panel Outdoor Type, For Single Phase 2 Wire System Having In Built Astronomical Adjustable Programmable Timer With Minimum 5 Years Battery Backup, 2 Pole Contactor Upto 60 A, With Maintenance Mode To Switch On Street Lights During Time Of Repairs With Energy Consumption Data Recording For Analysis And Lcd Display For Energy Monitoring With Numeric Key Pad In Provided Box Complete. , Supplying & Erecting Street Light Control Panel Outdoor Type, For Three Phase 4 Wire System Having In Built Astronomical Adjustable Programmable Timer With Minimum 5 Years Battery Backup, 4 Pole Contactor Upto 60 A, With Maintenance Mode To Switch On Street Lights During Time Of Repairs With Energy Consumption Data Recording For Analysis And Lcd Display For Energy Monitoring With Numeric Key Pad In Provided Box Complete , Servicing And Primary Maintenance Of Solar Light Pole 1 Visit In Month Included And Also Call Basis. Checking All Wire Connections, Nut Bolt Tighting, Lugs Connection, Timer Working Condition And Panel Cleaning , Supplying, Installing, Testing And Commissioning Solar Street Light Pole Comprising Of 9 W Led Fitting, 12V 18Ah Maintenance Free Lithium Battery, Min. 40 Wp Spv Module, Ms Powder Coated Battery Box Weather Proof, Mounted On 75/80 Mm Dia. B-Grade Gi Pole Of 6 M. Height Along With Brackets, Foundation, Earthling And Necessary Accessories Complete. Specification No. Esd-Sol-Stl ( With 5 Years Warrantee ) , 4-3-13 Supplying, Installing, Testing And Commissioning Solar Street Light Pole Comprising Of 12W X 2 Nos. Led Fittings, 12V Min. 100Ah Maintenance Free Lithium Battery, Min. 120Wp Spv Module, Ms Powder Coated Battery Box Weather Proof, Mounted On 75/80 Mm Dia. B-Grade Gi Pole Of 6 M. Height Along With Brackets, Foundation, Earthling And Necessary Accessories Complete. Specification No. Esdsol-Stl , Providing Rental Basis Hydraulic Bucket Vehicle Of Highth 13 Mtr. And Weight Capacity 200 Kg With Driver, Oprator And Disel Etc. For Per Day Basis.. , Providing & Erecting 7 M High (Clear Height) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 130 Mm A/F, Top 70 Mm A/F On Provided Foundation As Per Specification Bajaj No.Oh-Pl/Opl. , Providing & Erecting 9 M High (Clear Height) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 155 Mm A/F, Top 70 Mm A/F On Provided Foundation As Per Specification Bajaj No. Oh-Pl/Opl , Providing & Erecting 10 M High (Clear Height) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 175 Mm A/F, Top 70 Mm A/F On Provided Foundation As Per Specification Bajaj No. Oh-Pl/Opl , Providing & Erecting 11 M High (Clear Height) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 210 Mm A/F, Top 90 Mm A/F On Provided Foundation As Per Specification Bajaj No. Oh-Pl/Opl , Supplying And Erecting Outdoor Stand Mounted Feeder Pillar For Highmast Of The Same Manufacturer With 63A Tpn Mcb Incomer, Single Dial Timer Switch, 45A Tp Contactor For Automatic Switching Of Luminaries, 2 Nos 9A Contactors And Raise/Lower Push Button, And Provision For Termination Of Adequate Size Of Incoming And Outgoing Cables Erected In Min. 14 Swg Crca Sheet Box Powder Coated With Supporting Angles, Self-Lock, Gasket And Slanting Top Erected With cement concrete Foundation Complete , Supplying And Erecting 12.5 M (Clear Height) High Mast (Top 150Mm, Bottom- 360Mm) With Lowering And Raising Motorized Unit, Lantern Carriage Assembly Suitable For Max. 6 Nos. Luminaries And Its Control Gear Box, Lightning Finial Arrangement For Fixing Aviation Light And Foundation Bolts On Provided Foundation As Per Specification Bajaj No. Oh-Pl/Hm (Excluding Luminaries ). , Making Cement Concrete Foundation Including Excavation (60 X 60) Cm X Deep 1/6 Of Pole Length In 1:3:6 Cement Concrete 20 X 25 Mm Stone Metal, 45 Cm X 45 Cm X 45 Cm /45 Cm Dia. X 45 Cm. Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. (For Above 9 M Poles) , Supplying And Erecting Mini Feeder Pillar Triple Pole With 200A Fpmccb As Incomer And 2 Outgoing Circuits With Hrc Fuse Base And Cartridge Of 100A Consists Of Aluminium Bus Bar 500 V 200 A Complete Erected In 14 Gauge Crca Sheet Box With Supporting Angles, Self-Locks, Gasket And Slanting Top To Be Erected On Provided Foundation As Per Specification No. Sw-Swr/Mfp , Supplying & Erecting Street Light Control Panel In Powder Coated Crca 14/16 Swg Sheet, Outdoor Type, Single Phase, 240 V Consisted Of Suitable Rating Contactor, 24 Hrs Digital / Astronomical Time Switch With Minimum 5 Years Battery Backup, Spn Mcb 63 A Auto/Manual Selector Switch,On/Off Push Buttons, Indicator Lamps, Control Wiring, Metering Device, Etc For Automatic Operation & Overcurrent, Short Circuit, Earth Fault Protection Of Street Lights Upto The Max Load Of 12 Kw On Provided Iron Frame / cement concrete Foundation Complete. , Providing Earthing With Galvanized Iron Earth Plate Size 60 X 60 X 0.6 Cm Complete With All Materials, Testing & Recording The Results As Per Specification No. Ea-Ep , Providing Pipe Type Earthing With 40Mm. Dia. G.L. Pipe Or 20 Mm Dia. G.L. Rod Complete With All Materials As Per Specification No. Ea-Ep , Supplying And Erecting Regular/ Standard Model Ceiling Fan Of 600Mm. Sweep Complete Erected In Position As Per Specification No. Fg-Fn/Cf , Supplying And Erecting Regular/ Standard Model Ceiling Fan Of 900 /1050 Mm. Sweep Complete Erected In Position As Per Specification No. Fg-Fn/Cf , Supplying & Fixing Anchor Type Fastener Fan Hook, With 2 Nos. Of 10 Mm Dia X 75 Mm Long With Necessary Materials For Ceiling Fan. , 36 Watt Pcb , 36 Watt Driver , 50-60 Watt Pcb , 50-60 Watt Driver , 70 Watt Pcb , 70 Watt Driver , Highmast Repairing 100-150 Watt , Service Wire 4 Sq.Mm Isi Mark 2 Core , Service Wire 6 Sq.Mm Isi Mark 2 Core , Service Wire 10 Sq.Mm Isi Mark 2 Core , Frp Box Of Size 300 X200 X125 Mm 2.7Mm Thickness , 12W Led Bulb , 14W Led Bulb , 18W Led Bulb , 100 W Bulb , 200 W Bulb , 35 annual periodical maintenance Kitkat Fuse , 63 annual periodical maintenance Kitkat Fuse , Servie Reel Pvc , Retrofit T8 Led 18/20 Tube Light , Lamp Holder China Clay , Lamp Holder (Pendent) , 5Am Shocket Armor , 5Am Sawich Armor , Miter Box Singal Phase Pvc 300X150x420 , Miter Box 3Phase Pvc 540X600x200 , Miter Box Coted , 8M Sarfes Box & Pleat , Rsj Pole 9 Mtr , V Cross Arm 22 Kv , Cut Pont Set 22 Kv , Pin Insulater22 Kv , Disc Insulater 22 Kv , Nut Bolt , Conductor 55 Sq Mm Aac , Ht Stay Set , Lt Stay Set , Stay Wire , Gi Wire 8 Swg , Pole Errection , Conductor Errection , V Cros Fixing , Cutpoint Fixing , Mcb Box Metal 3Way , Supply Of Tiranga Pole As Per Sepcifucation 139.7Mm Od Pipe - 3Mtr 114.3Mm Od Pipe 1Mtr - 03 Nos 88.9Mm- Od Pipe - 2 Mtr Total 8 Mtr Pole , Day &Night Motin Sensor Auto On/Off Light Electronics(With Drayvar) , 9 Mtr. Pole Solar High Mast System: A) Solar Led Luminaries / Flood Light Wattage Should Be Of 50 Watt -- 6 Nos. B) Led Should Be Of/Powered By Philips/ Osaram Or Equivalent Reputed Brand. C) Battery Should Be Of Lithium Ion / Li Sepo4 (Lithium Ferro Phosphate) D) Battery Capacity Should Be Atleast 100 Ah --- 6 Nos. E) Solar Panel Should Be Of 330 Watt --- 6 Nos. F) Pole Should Be Polygonal. The Mast Should Be Hot Dip Galvanized 20 , 6 Mtr. Pole Solar High Mast System: A) Solar Led Luminaries / Flood Light Wattage Should Be Of 50 Watt -- 4 Nos. B) Led Should Be Of/Powered By Philips/ Osaram Or Equivalent Reputed Brand. C) Battery Should Be Of Lithium Ion / Li Sepo4 (Lithium Ferro Phosphate) D) Battery Capacity Should Be Atleast 100 Ah --- 4 Nos. E) Solar Panel Should Be Of 330 Watt --- 4 Nos. F) Pole Should Be Polygonal. The Mast Should Be Hot Dip Galvanized 20 , Gst Charges
Contract Date: Jun 08, 2026 Contract Value : 14.78 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
38.
Defence #11213485 AOC
Tender For Additional / Alternator To P-266 Of 5 Afdc And Provision Of Misc E/M And B/R Services In Various Buildings And Certain Minor Works At Afs Pune Under Ge Af Lohegaon.; 1 Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering all as specified and directed. 2 Dismantling timber in fillets rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work 3 S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. 4 S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Eaves boards, fixed with self tapping screws as specified 5 S & F Rolled Mild Steelroof trusses(framed),trussed ,purlins ,rails and fastenings etc.,confirming to Fe 410 - S including distance pieces, cleats, etc., complete. 6 S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering.doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening andfixing complete (Eaves board fixing ) 7 S & F 6mm thick asbestos cement plain building boards fixed to steel frameowrk with screws all as specified and directed ( For Eaves Board). 8 S &F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-w (Gde E-250 quality A) all as specified and directed. 9 M & L for Preparation of newsteel/iron surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paintover red oxide primer for material and labour complete all as specified. 10 M & LPCC B1 1:2:4 (12.5mm graded aggregate) for in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. (Note :- Bed boxes and Coping on wall to fill up the gap) 11 Demolition of Brickwork or stone/boulder masonry/PCC bloack masanory,built in cement motar all as specified and directed. 12 S & F brick work with fly ash bricks,straight or cuved on plan exc 6m mean radius built in CM 1:4all as specified and directed. (Note : 1. For filling the Gap between sheet and wall 2. Clsoing of ventilaots ) 13 Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge 14 Material and labour for suspended false ceiling usinganodized aluminum snap grid frame work.Including Hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete. Perforated particle board/tiles for insulation and acoustic purposes, 60 x 60 cm size, fixed on snap grid 12mm thick confirming to IS 2095, 2995 Part I fixed with 25mm dry wall screws @ 230 mm C/C with screw driver to match surface attachment. Finally board have to be joined and finished to have a flush look using jointing compound/tape as per manufacturer instruction. With Designing as per direction in two steps complete all as specified and directed by Engineer in Charge. 15 M & L rendering 20mm thick on surface of stone masonary surface in CM 1:4and is to be finished even and smooth with out using extra cement complete all asspecified directed 16 M & L rendering 20mm thick on surface of stone masonary surface in CM 1:6and is to be finished even and smooth with out using extra cement complete all asspecified directed 17 M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than than 50gm/litre and UV resistance as per IS 15489:2004 Alkali and fungal resistance, dirt resistance exterior paint or required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.9 litre/10 sqm over new surfaces/old surfaces of wall all as specified and directed. 18 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cmdeep and getting out hard dense soil 19 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting poin 20 Hard coare of broken stone aggregate, of gauge n.exc 60 mm 21 M&L for cement concrete Type D -2 1:4:8 (40 mm graded agg) in foundation fillig/path and mass concrete 22 Formwork to sides of flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter 23 M&L Forming Contraction (Dummy) joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade A in plinth protection 24 Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) 25 S &F 605 x 605 mm Anodised aluminium snap grid frame work for false ceiling all as specified 26 Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners12.5mm dia. 40mm long complete all as specified 27 Dismantling boarding, any description, fixed in any position with nail 28 Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete 29 M&L rendering 15mm thick on surface of concrete surface in CM 1:6and is to be finished even and smooth with out using extra cement complete all asspecified directed 30 Demolition of stone / block masonry built in CM 1:4 31 M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) and set in CM (1:6). 32 Preparing new wall surface, providing and applyingplaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil emulsion 33 Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners withholdfasts and brackets, complete 34 S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 35 S&F Sheet glass 5.5 mm thick ordinary quality and glazing fixedin aluminium doors squareexc 0.5 sq. m in each pane 36 S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers 37 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, 38 S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats 39 Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) 40 M & L for 100mm thick PCC type B-2 (1:2:4) using 40mm graded aggbnas in flooring finshed even and smooth w/o using extra cement. 41 M & L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded agg finished even and smooth w/o using extr cement. 42 M & L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectamgular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors (Superior/ Premium quality), set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15mm thick screed bed in CM (1:6) complete all specified and directed. 43 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer in Charge. 44 M & L fire resistant paint on steel surface over a coat of primer complete alll as specified (Note: The primer is of same material of 1:1 dilution application) 45 S & F of mineral fibre reinforced false ceiling tiles (all height)of size 595X595 mm of approved texture, design and pattern. The tiles should have humidity risistance RH of 99%, Light resistance greater than 85% , thermal conductivity K=0.052-0.057 W/mK, Fire performnce As per (BS476 Pt-6&7) in true horizontallevel suspended on interlocking T-grid of hot dipped all around ganvanisedIron Section of 0.33mm thick (galvanised @ 120GSM)bcomprising of main T runner of 15 X32 mm of length 3000mm, cross T of size 15X32 mm of length 600mm to form grid module of size 600X600 mm suspended from ceiling using galvanised Mild steel item ( galvanised @ 80GSM) 50mm long 8mm outer dia M-6 Dash Fastner, 6mm diameter fully threaded hanger rod upto 1000mm length and L-shped level adjuster of size 85X25X2mm, spaced at 1200 mm center to center along main T, the system should rest on perpfery walls/ partition with the help of GI perimeter wall angle of size 24X24X300mm made of 0.40mm thick sheet, to be fixed to the wall with the help of the plastic rawl plug at 450mm center to center & 40mm long drywall S.S screws. The exposed bottom portion of all y- Sectionused in false ceiling support system shall be prepainted with polyster baked paints, for sll heigth. the work shall be carried outas per specification drawing adn as per the direction of the Engr-in-charge with 16mm thick Bevelled traingular Mineral Fibre faalse ceiling (NRC 0.5 to 0.6)) 46 Taking down and of chowkats or frames exc 1.5 sqm n exc 4 sqm each 47 S & F Anodised aluminium frame powder coated to (minimun thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 48 S & F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips,ruber neoprene packing, handk=les 2 Nos in each door, hinges, anodises aluminium snap beading screws etc. complete all as specified. 49 Cuting holes exc 150 sqcm but not exc 400 Sqcm into or through brick walls built in cement mortar of any description and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I as required 50 m&L two coats or Oil Bound distemper on Cement concrete surface over a coat of primer as per the shed directed by the engineer-ncharge, complete all as specified. 51 M&L for treating small articles such as ends of posts, holdfasts etc with tar or coal tar black paint; area exc 0.1 Sqm but n exc 0.5 Sqm each 52 S&F sheet in repairs glass 4.8 mm thick exc 0.5 sqm area ordinary quality and glazing with oil putty/rubber gasket fittings all as specified and directed. 53 M & L in repairs for 12mm Prelaminated particle board, interior grade, prilaminated both side with decorative choice lamination fixed with screws to timber/Aluminium frame work complete all as specified and directed. 54 S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) 1000 Ltr capacity hoisted and fixed in position including removal of existing damaged water tanks all as specified in SSR Part I 55 S & F in repairs 20 mmBrass valves ,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed 56 S&Fbib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap). 57 S&F GI tubingof 15 mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors completeall as specified and as directed by the Engr-in-C. 58 S&F GI tubingof 20mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors completeall as specified and as directed by the Engr-in-C. 59 S&F GI tubingof 25mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors completeall as specified and as directed by the Engr-in-C. 60 S&F25 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe 61 S&F20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe 62 Dismantling wrought iron or mild steel work of any description not otherwise provided for. 63 S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 graded St 240 all as specified and directed.(Eaves Baords) 64 M&L for Providing precast cement concrete (20mm graded stone aggregate) 1:3:6 type C-1 as in solid building blocks 10cm thick setting in cement mortar,1:4 complete, in walls all as specified. 65 Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed 66 M&L TMT bars 10 mm and over cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified 67 M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) fair finished surfaces of concrete flat all as specified 68 M&L for reinforced cement concrete M 20 using 20mm crushed stone aggregate as in roof slabs supported on walls surfaces of concrete flat all as specified. 69 M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 and rendering is to be finish even and smooth with out using extra cement. 70 M&L for preperation of new concrete /plastered surface of any description, two coat of plastic emulsion paint over a coat of primer complete all as specified and as directed complete all as specified and as directed. 71 M&L for Powder Coated (Minimum thickness of powdercoating 50 micron)Anodised aluminium frame of standerd section for doors, windows, ventilators and partitions withdoublerebates including joining cleat for fixing etc. complete all as specified 72 S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (For sliding window ) 73 M&L sheet glass 4.0mm thick figured glass, pin head type and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed 74 M&L for vetrified ceramic tiles 10mm thick full body(Dark shade/Ultra Charged/Double charged ) (square/rectangular) polished, area of each tilesexc 1.00 sqm in floors over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. 75 M&L for vetrified ceramic tiles 10mm thick full body(lightshade ) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. 76 S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediatechannel at 457 mm centre to centre and including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified 77 S&F for 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish(Frame work for ceiling shall be measured and paid separately) 78 Removal of existing Rifle racks including all fixing stell bolts and cement work all as specified work 79 M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:4 all as Specified 80 M&L for Providing precast cement concrete (20mm graded stone aggregate) 1:3:6 type C-1 as in solid building blocks 10cm thick setting in cement mortar,1:4 complete, in walls all as specified. 81 M & L for 25mm thick PCC 1:2:4,type B-0, (using 12.50 mm graded stone aggregate) as in under layer of tile flooring & finishing the surfacesrough to receive screed bed complete as specified and directed. 82 M&L for machine cut mirror polish kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed. 83 M&L for machine cut mirror polish kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed. 84 Fixing and grouting of new steel Rifle racks on the floor including necessary fixing bolts and necessary arrangements of grouting and grouting material all as specified. 85 M&L Hand rails, grills ,Gates ,half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof ,Brackets for Valley gutters ,including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 86 S&F for Mild steel ,plain black sheet of minimum 0.8mm thickness for Hoods cover for Rolling shutters;cladding to door shutters/Hangar doors ; water tank platforms etc with plain 40mm lap joints or welded/riveted seams including ,bending, turning up, mitred angles , stopped ends,outlets,etc. as required all as sprcified and directed by Engr-in Charge. 87 M&L for Cutting holes in brick/stone walls in mud/cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4Type B-1 as required all as specified and directed by Engineer-in-Charge. 88 Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light pointcomplete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge. including sorting out serviceable and unserviceable light fitting and keep serviceable fitting in safe guard for reuse as required on site. 89 Taking down the sub main wiring of any dia / sq mmon teak wood batten /PVC conduit GI earth wire all as directed. 90 Taking down cearfully byunscrewingthe unserviceable DB Boxes, MCB distribution boards SP & TPN with porcelain cutouts etc all as directed. 91 Material and labour for providing point wiring with two runs of 1.5 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and capingwith all fittings/fixture etc andsurface typePVC box, cover plate all as specified and directed by Engr-In-Charge.(a) Onelight point controlled by one switch. 92 (b) One 3 pin socket 5 A on independent board. 93 (c) One 3 pin socket 5 A on same board. 94 Material and labour for providing point wiring with two runs of 2.5 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVCinsulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping,with all fittings/fixture etc andsurface typeModular , PVC box cover plate, frame all as specified and ndirected by Engr-In-Charge. 95 S & F Sub Main Wiringwith FRLS PVC Insulatedmultistranded copper conductorwires ofsize2x6.0 sq. mm + 1x6.0 sq. mm earth wire in casing caping complete as directed.Note : for Item No 95 One run of phase wire one run of Neutral wire and one run of Earth wireand one run of casing and capping shall be meassured and as one length. 96 S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps.including fixing concealed in wall and making good the disturbed surfacecomplete all as directed 97 Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 98 Supply and fixEnergy efficient recess mounted LED panel fitting 36 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 5700/6500K colour temperature with current electronic connections as directed 99 S&F MCB SP 240 volt 6 to 32 A C series complete 100 S &F for MCB SPN 40-63 Amps C curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge. 101 Supply and fix Modular switch 1 way 6A, 1 module 102 Supply and fixmodular Socket, 6A - 2/3 pin combined 2 moduler 103 Supply and fixModular switch 1 way 16A, 1 module 104 Supply and fixmodolar Socket 6A/16A - 2/3 pin combined2 module, 105 Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm 106 S & F Modular white cover plate with frame 2 Module 107 S & F Modular white cover plate with frame 3 Module 108 S & F Modular white cover plate with frame4 Module 109 S & F Modular white cover plate with frame 6 Module 110 S & F Modular white cover plate with frame 8 Module 111 Supply, Fixing , Testing and Commissioning of Single phase isolation transformer to be installed at input power supply of L-2 switch,via 16 Amps MCB and with power earthing point specification as follows 1Ph, Capacity 1KVA, Input 230V AC ±10%,Output 230V±10%,50 Hz,cooper wire,work efficiency more than 95%,potential between earth to neutral less than 1 Volt with all standard fitting as per direction of Engineer in charge 112 Supply, Fixing , Testing and Commissioning ofIsolation transformer of capacity 5 KVA, single phase ,50 Hz , Copper wound , Air cooled , class of insulation A ,metallic body duly powder coated designed for input Voltage range 240+-5% and output voltage range 240+-5% ,Ratio 1:1 , indoor , efficiency more than 95 % , Potential difference between neutral to earth less than one volt with all standard fittingsas per direction of Engineer in charge 113 Supply, Fixing , Testing and Commissioningof Three Phase Surge Protector Device to be installed at input power supply of L-2 switch all as specified and directed by Engr-In-Charge 114 S&F wall mounted Industrial grade metal enclosure box made from 3mm thick CRCA sheet consist of following Items:-(a) Panel mounting Industrial grade socket/plug outlet 16 A,IP44(b) SPD ,1.5kv,320A,20kA - 1 Nos(c ) MCB SP 16 A- 1 Nos 115 S&F Vertical double door Distribution board TPN 4 way 125 A rated busbarconsisting ofMCCB. 63 A 18KA - 1 Noincluding fixing on wallsurface and making good the disturbed surfacemaking all nacessary incomming and out going connections using proper size copper thimblescompleteall as required on site all as directed 116 Supply and fixing in replacement sheet metal enclosure with DBs ( grouted in walls) double door type for MCBs 12 ways with 200 Amps 240 volts rated bus bar incl taking down old DB all as specified. 117 Material and labour for taking down serviceable Fire Alarm panel from one location and re-install the same at same /another location including fixing brackets/nut bolts incl testing and commessioning of the same all as specified and directed 118 Material and labour for taking down serviceable Smoke / Heat / Fire detector from one location and re-install the same at same /another location including necessery cable upto Fire alarm panelincl testing and commessioning of the same all as specified and directed 119 Supply and fix adressable smoke Detectors Complying with and type certified to EN-45 type multisensor detector with heat and smoke combination Photoelectric / Optical with base with self built intelligence as per IS: 11360 all as specified. 120 Supply, install, testing and comissioning of adessable break glass manual call pointincluding sunken boxes, with built in monitor module will all acessories and signal indicator complete as per tech specification and shall be UL listed complete. 121 Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm ,4 core, 1100 Volts grade. 122 Material and labour for taking down serviceable split AC of capaicty upto 2.0 TR from one location and re-install the same at same /another another location including fixing brackets, gas charging, brazing and additional required copper piping incl testing and commessioning of the same all as specified and directed 123 Supply, Install testing and commessioning Single pole and neutral enclosure 240 Volts with a two pin and earth plug and socket complete with one single pole MCB 20 Amp all as specified and directed 124 Material and labour for providing point wiring with two runs of 4 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVCinsulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping,ISI Marked complet for housing one 15 to 20 A Switch / socketscomplete 125 Supply, Install , Testing and Commissioning of wall mounted enclosure box made from 3mm thick CRCA sheet enclosure consist of following items for 3 Phase 2 AC timer & Controller of Auto switching timer unit suitable for operate 8.75 TR package type AC:-(a) Timer - 1 No(b) Contactor 32 amps - 2 No(c ) Indication lamp - 1 No
Contract Date: Jan 09, 2026 Contract Value : 44.46 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Maharashtra View Result →
39.
Public Administrative Department #11200347 Technical Bid
Tender For Supply Of Electrical Materials On Annual Rate Contract. , 1 Sq.Mm F.R Copper Pvc Insulated Wire. , 2.5 Sq.Mm F.R Copper Pvc Insulated Wire. , 4 Sq.Mm Fr Copper Pvc Insulated Wire. , 6 Sq.Mm Fr Copper Pvc Insulated Wire. , Mains With Isi Mark Wp 2 X 2.5 Sq.Mm. 1100 V Grade Aluminium Pvc Insulated Cable. , Mains With Isi Mark Wp 2 X 4 Sq.Mm. 1100 V Grade Aluminium Pvc Insulated Cable. , Mains With Isi Mark Wp 2 X 6 Sq. Mm.1100 V. Grade Aluminium Pvc Insulated Cable. , Retrofit T8 Led 18 / 20 Tube Light. , Ceiling Rose / Batten Holder /Slanting Holder /Hanging Cord Switch / Hanging Bell Push/ Pendent Holder Bakelite Base 6A. , Street Light Bracket Made From 25 Mm. Dia ‘B Class G.I. Pipe, 0.6M. In Length With Clamps For Suitable Pole. , Street Light Bracket Made From 32 Mm. Dia ‘B Class G.I. Pipe, 0.6M. In Length With Clamps For Suitable Pole. , Street Light Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6M. In Length With Clamps For Suitable Pole. , Condenser 2.5 Micro Farad For Ceiling Fan. , Ceiling Fan Of 600Mm. Sweep Complete , Ceiling Fan Of 900Mm. Sweep Complete , Energy Saving Ceiling Fan 230 V A.C. 50 Cycles 1200 Mm Complete , Ceiling Fan 230 V A.C. 50 Cycles 1400 Mm Complete , Double Pole Metal Clad Switch With Hc Type Fuse 240V, 63A , Triple Pole Metal Clad Switch And Fuse 415V, 100A , Spmcb 0.5A To 5A, C-Series , Spmcb 6A To 32A, B- Series (For Lighting) , Spmcb 40A To 63A, B- Series (For Lighting) , Tpmcb 6 A To 32A , 3 Pole Mccb Upto 100A, 415V, With Short Circuit Rating 25 Ka (Ics=100% Of Icu), Adjustable Thermal (Overload) Setting And Fixed Magnetic Setting With Provided Leads, Provision For Installation Of Shunt/ Uv/ Trip Alarm Contact And Mccb Should Have Phase Barriers Both Sides, In Provided Enclosure. , 3 Pole Mccb Upto 200A, 415V, With Short Circuit Rating 25 Ka (Ics=100% Of Icu), Adjustable Thermal (Overload) Setting And Fixed Magnetic Setting With Provided Leads, Provision For Installation Of Shunt/ Uv/ Trip Alarm Contact And Mccb Should Have Phase Barriers Both Sides, In Provided Enclosure. , Hc Pattern Porcelain Fuse Bridges With Base & Hc Type Fuse Links 240V 16A Erected On Polished Wooden Block Complete , Hc Pattern Porcelain Fuse Bridges With Base & Hc Type Fuse Links 240V 32A Erected On Polished Wooden Block Complete , Porcelain Fuse Bridges With Base Hc Type Fuse Links 240V 63A Erected On Polished Wooden Block Complete , Porcelain Fuse Bridges With Base Hc Type Fuse Links 415V 100A Erected On Polished Wooden Block Complete , Porcelain Fuse Bridges With Base Hc Type Fuse Links 415V 200A Erected On Polished Wooden Block Complete , Xlpe Armoured Cable 2 Core 6 Sq.Mm. Aluminium Conductor With Continuous 5.48 Sq. Mm , Xlpe Armoured Cable 2 Core 10 Sq.Mm. Aluminium Conductor With Continuous 5.48 Sq. Mm , Xlpe Armoured Cable 2 Core 16 Sq.Mm. Aluminium Conductor With Continuous 5.48 Sq. Mm , Xlpe Armoured Cable 3½ Core 25 Sq.Mm. Aluminium Conductor , Xlpe Armoured Cable 4 Core 6 Sq.Mm. Aluminium Conductor , Xlpe Armoured Cable 4 Core 10 Sq.Mm. Aluminium Conductor , Xlpe Armoured Cable 4 Core 16 Sq.Mm. Aluminium Conductor , Gi Earth Wire Of High Purity Of Different Sizes Used For Earthing Or Any Other Purposes , Providing Pair Of Duly Tested Rubber Hand Gloves As Per Is:47705 Suitable For Working Upto 22 Kv Supply Complete. , Ding Dong / Electronic Musical Type Call Bell With Heavy Duty Coil Suitable To Operate On 230V A.C. , Electronic Type Cordless Call Bell Erected On T.W. Board Having Portable Bell Push Working On 9V D.C. Battery And (Effective Range Upto 45 Meter) Bell On 250 V A.C.Supply , Electronic Type Step Regulator For Ceiling Fan 600/ 900/ 1200/ 1400 Mm. Sweep, Complete , Double Pole Isolator Only Switch Version Of Miniature Circuit Breaker Of 40A , Triple Pole Isolators Only Switch Version Of Miniature Circuit Breaker Of 63A , Triple Pole Isolators Only Switch Version Of Miniature Circuit Breaker Of 100A , Quartz Electronic Time Switch Having 24 Hour Dial To Work On 250 V 50 Cycle Ac Having Built In Rechargeable Nickel Cadmium Batteries To Run The Time Switch On Failure Of Supply Having Switch Contact Rating Up To 16A To Use Independently Or In Conjunction With Contactor. , Two Pole Power Contactor 230 V, 12 A For Time Switch Complete , Two Pole Power Contactor 230 V, 32 A For Time Switch Complete , Four Pole Power Contactor 430 V, 16 A For Time Switch Complete , Four Pole Power Contactor 430 V, 40 A For Time Switch Complete , Programmable Digital Almanac Timer Microcontroller Based With Real Time Clock To Operate On Derived Switching On And Switching Off Street Light As Per Daily Sunset And Sunrise Respectively Automatically Having 4 Digit Led Continuous Time Display, Relay Output 230 V / 10A With 10 Hrs. Battery Backup And Manual Over Drive Facility Capable To Drive Different Capacity Contactors Timer , Modular Type Switch 6A / 10A , Modular Type Switch 16A , Modular Type 3 Pin 6A Multi Socket With Safety Shutter , Modular Type 3 Pin 16A Multi Socket With Safety Shutter , Pvc Surface Modular Switch Box With Double Mounting Plate For 1 Module , Pvc Surface Modular Switch Box With Double Mounting Plate For 2 Module , Pvc Surface Modular Switch Box With Double Mounting Plate For 3 Module , Pvc Surface Modular Switch Box With Double Mounting Plate For 4 Module , Pvc Surface Modular Switch Box With Double Mounting Plate For 6 Module , Pvc Surface Modular Switch Box With Double Mounting Plate For 8 Module , Pvc Surface Modular Switch Box With Double Mounting Plate For 12 Module , Single Pole And Neutral Distribution Board (Spndb), With 2 Ways For Incoming And 2 Ways (2 Poles) For Outgoing Sp Mcbs , Single Pole And Neutral Distribution Board (Spndb), With 2 Ways For Incoming And 6 Ways (6 Poles) For Outgoing Sp Mcbs , Exhaust Fan Heavy Duty 230 V, A.C. 50 Cycles 375/380 Mm. 900 Rpm , Exhaust Fan Medium Duty 230 V A.C. 50 Cycles 225Mm. 1400 Rpm , Exhaust Fan Heavy Duty 230 V A.C. 50 Cycles 375/380 Mm. 1400 Rpm , Cabin Fan Of A.C. 230 V. 50 Cycles 250 Mm./300 Mm. Sweep , Cabin Fan Of A.C. 230 V. 50 Cycles 400 Mm. Sweep , 3W, 230V Integral Type Led Lamp Suitable For B-22 / E27 Base , 5W-7W, 230V Integral Type Led Lamp Suitable For B-22 / E-27 Base. , 10-12W, 230V Integral Type Led Lamp Suitable For B-22 / E-27 Base. , 18W, 230V Integral Type Led Lamp Suitable For B-22 / E 27 Base , Pvc Trunking (Pvc Casing-N-Capping) Of Size 20 Mm , Pvc Trunking (Pvc Casing-N-Capping) Of Size 32 Mm , Hms Pvc Conduit Frls Grade 20 Mm Dia. , Hms Pvc Conduit Frls Grade 32 Mm Dia. , Pvc Insulated Pvc Round Sheathed 1.5 Sq.Mm (30 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv , Single Phase Input & 1 Phase Output 3 Kva Capacity Online Pure Sine Wave Ups , 12V/26Ah Smf Battery With Battery Terminal Wire , Led Flood Light Fitting Max. 30W Ip65 & Ik07 Class. , Led Flood Light Fitting Max. 50W Ip65 & Ik07 Class. , Led Flood Light Fitting Max. 70W Ip65 & Ik07 Class. , Led Flood Light Fitting Max. 100W Ip65 & Ik07 Class. , Led Flood Light Fitting Max. 120W Ip65 & Ik07 Class. , Led Flood Light Fitting Max. 150W Ip65 & Ik07 Class. , Led Street Light Fitting 18 To 22W Ip65 & Ik08 Class. , Led Street Light Fitting 23 To 25W Ip65 & Ik08 Class. , Led Street Light Fitting 26 To 30W Ip65 & Ik08 Class. , Led Street Light Fitting 40 To 50W Ip65 & Ik08 Class. , Led Street Light Fitting 60W Ip65 & Ik08 Class. , Led Street Light Fitting 70-75W Ip65 & Ik08 Class. , Led Street Light Fitting 85-90W Ip65 & Ik08 Class. , Led Street Light Fitting 100-110W Ip65 & Ik08 Class. , Metal Work In Crca Sheet Including Iron Work For Supports With Fabrication Of Boxes, Panel Boards, Etc. Including Cutting, Bending, Drilling, Welding, Riveting, Treated With Anti-Rust Treatment And Duly Powder Coated Or Painted With One Coat Of Red Lead Paint And 2 Coats Of Enamel Paint Complete , Plywood 18/19 Mm Thick Fixed To Wall Or On Provided Panel Board With Necessary Materials Such As Screws, Wall Fasteners, Supports, Nut Bolts Etc. Complete , Single Phase, 240V, Street Light Control Panel Up To The Max Load Of 6Kw, Spn Mcb 40A, Powder Coated Crca 14 Swg Sheet, Outdoor Type, Having Ip54,Ik10 Protection, Suitable Rating Contactor, 24 Hrs. Astronomical Time Switch With Minimum 5 Years Battery Backup. , Single Phase, 240V, Street Light Control Panel Up To The Max Load Of 12Kw, Spn Mcb 63A, Powder Coated Crca 14 Swg Sheet, Outdoor Type, Having Ip54,Ik10 Protection, Suitable Rating Contactor, 24 Hrs. Astronomical Time Switch With Minimum 5 Years Battery Backup. , Three Phase, 415V, Street Light Control Panel Up To The Max Load Of 6Kw, Tpn Mcb 40A. , Three Phase, 415V, Street Light Control Panel Up To The Max Load Of 12Kw, Tpn Mcb 63A. , Mcb Type Change Over Switch 2 Pole, 25A With 3 Positions , Mcb Type Change Over Switch 2 Pole, 40A With 3 Positions , Mcb Type Change Over Switch 2 Pole, 63A With 3 Positions , Mcb Type Change Over Switch 4 Pole, 25A With 3Positions , Mcb Type Change Over Switch 4 Pole, 40A With 3 Positions , Mcb Type Change Over Switch 4 Pole, 63A With 3 Positions , Led Square / Circular Max. 7W Down Lighter/ Panel Light. , Led Square / Circular Max. 11 W Down Lighter/Panel Light. , Led Square / Circular Max. 14 W Down Lighter/Panel Light. , Led Square / Circular Max. 18 W Down Lighter/Panel Light. , Led Square / Circular Max. 25 W Down Lighter/Panel Light. , Led Panel Light (600Mm X 600Mm) Max. 30 W. , Led Panel Light (600Mm X 600Mm) Max. 35 W. , 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) , 75 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) , 90 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) , Frp Box Of Size 150Mm X 125Mm X 100 Mm, 2.7 Mm Thick Complete , Frp Box Of Size 250Mm X 200Mm X 100 Mm, 2.7 Mm Thick Complete , Frp Box Of Size 300Mm X 200Mm X 125 Mm, 2.7 Mm Thick Complete , Split Type Variable Speed Inverter Technology With Minimum 3 To 1 Convertible Mode For Compressor, Room Air Conditioning Unit 1.3Tr To 1.6Tr Capacity Having Iseer Minimum 3.8 To Maximum 4.39 Suitable To Operate On 250V, 50 Hz, A.C. , Split Type Variable Speed Inverter Technology With Minimum 3 To 1 Convertible Mode For Compressor, Room Air Conditioning Unit 1.7Tr To 2.0Tr Capacity Having Iseer Minimum 3.8 To Maximum 4.39 Suitable To Operate On 250V, 50 Hz, A.C. , 2 Pole Rccb 16/25A, 30/100/300 Ma Sensitivity. , 2 Pole Rccb 40A, 30/100/300 Ma Sensitivity. , 2 Pole Rccb 63A, 30/100/300 Ma Sensitivity. , 4 Pole Rccb 16/25A, 30/100/300 Ma Sensitivity. , 4 Pole Rccb 40A, 30/100/300 Ma Sensitivity. , 4 Pole Rccb 63A, 30/100/300 Ma Sensitivity. , 4 Pole Rccb 80A, 30/100/300 Ma Sensitivity. , Minimum Three & Above Star Rated Submersible Pump Set Of 0.75 Kw/1 Hp With 230 V, 50 C/S Ac Supply Suitable For 100 Mm Dia. Borewell Suitable For 10 To 60 Lpm Discharge At 88 To 33 M Head & Discharge & Delivery Pipe Of Size-32 Mm , G.I. Pipe ‘A Class 40 Mm , G.I. Pipe ‘A Class 50 Mm , G.I. Pipe ‘A Class 75 Mm , Arial Bunch Cable 1 Core For Street Light 16 Sq.Mm. , Arial Bunch Cable 2 Core (Phase + Neutral) For Street Light 16 Sq.Mm. , Supplying, Installing, Testing And Commissioning Of Single Phase, 230V, 50 Hz, 800 To 900Va Digital Pure Sine Wave Inverter With Backup Time Of .... Hrs. Based On Insulated Gate Bipolar Transistor (Igbt) Technology Complete. , Supplying, Installing, Testing And Commissioning Of Single Phase, 230V, 50 Hz, 2500 Va Digital Pure Sine Wave Inverter With Backup Time Of ... Hrs. Based On Insulated Gate Bipolar Transistor (Igbt) Technology Complete. , Supplying And Erecting 12V/200Ah Tubular Battery With Battery Terminal Wire, Duly Charged With 36 Months Warranty Complete. , Led Street / Flood Light Driver Upto 25W , Led Street / Flood Light Driver 26 W To 40 W , Led Street / Flood Light Driver 45 W To 60 W , Led Street / Flood Light Driver 65 W To 70 W , Led Street / Flood Light Driver 75 W To 90 W , Led Street / Flood Light Driver 100 W To 110 W , Led Street / Flood Light Pcb Kit Upto 25W , Led Street / Flood Light Pcb Kit 26 W To 40 W , Led Street / Flood Light Pcb Kit 45 W To 60 W , Led Street / Flood Light Driver 65 W To 70 W , Led Street / Flood Light Driver 75 W To 90 W , Led Street / Flood Light Driver 100 W To 110 W , Flexible Led Rope Light 18M Length Upto 50W Conforming Ip 65 Of Any Colour Including Driver Complete With 1 Year Warranty. (For Install On Street Light Pole In Indian Flag Tricolor). , Pvc Insulated Pvc Round Sheathed 1 Sq.Mm (32 No. X 0.20Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv. , Gate/Garden Light Fitting With 200Mm Dia. Glass Bowl Suitable For Upto 12W Led Lamp. , Gate/Garden Light Fitting With 300Mm Dia. Glass Bowl Suitable For Upto 12W Led Lamp. , Integral Post Top Lantern Fixtures (Mushroom Type) Suitable For Led Lamp Upto 12 W Consisting Of Clear Acrylic Top Cover, Cast Aluminium Pole Cap Complete With Accessories. , Integral Post Top Lantern Fixtures (Globe Type) Suitable For Led Lamp Upto 12 W Consisting Of Aesthetic Round Clear Acrylic Top Cover, Cast Aluminium Pole Cap. , Integral Post Top Lantern Fixtures (Light House Type) Suitable Upto Led 18 W Lamp Consisting Of Combination Of Spun Aluminium Canopy & Clear Acrylic Top Cover, Cast Aluminium Pole Cap.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 6
Maharashtra View Result →
40.
Public Administrative Department #11199048 AOC
Tender for Annual Tender 2026-2027 Supply Of Street Light Materials In Ettayapuram Town Panchayat. , 4 Feet Flourescent Tube Light , 40W Copper Choke , 40W Tube Light Starter , 36W / 40W Tubelight Electronic Choke , Tube Light Side Lock Holder , Insluation Gum Tape Roll - Isi , 1/18 Vir Copper Wire [1/44] [90Mtr] , 3/20 Cts Copper Wire [3/36] [90Mtr] , 7/20 Cts Copper Wire [7/34] [90Mtr] , 7/16 Cts Copper Wire [7/67] [90Mtr] , 19/16 Cts Copper Wire [19/51] [90Mtr] , 1.5 Sq.Mm 3 Core Copper Cable , 2.5 Sq.Mm 3 Core Copper Cable , 4 Sq.Mm 3 Core Copper Cable , 6 Sq.Mm 3 Core Copper Cable , 10 Sq.Mm 3 Core Copper Cable , 16 Sq.Mm 3 Core Copper Cable , 36W 4Pin Lamp Holder , 36W Lamp Clip , 24W T5 Holder , Led Fitting Top Protection Glass - Street Light , Led Fitting Top Protection Glass - Flood Light , 20 / 25 Mm 1 No Gi Bend Pipe, With 2Nos Of Pole Clamps With Bolts And Nuts , 32 / 40 Mm 1 No Gi Bend Pipe, With 2Nos Of Pole Clamps With Bolts And Nuts , 6Amps To 32 Amps Sp Mcb , 40Amps 2Pole Isolator , 63Amps 4Pole Isolator , 32A D.P Switch , Mcb Box , Fuse Unit 16 Amps 240V , Fuse Unit 32 Amps 415V , Fuse Unit 63 Amps 415V , Fuse Unit 100 Amps 415V (Heavy Duty) , Fuse Unit 200 Amps 415V (Heavy Duty) , Fuse Unit 300 Amps 415V (Heavy Duty) , Fuse Unit 400 Amps 415V (Heavy Duty) , Fuse Unit 500 Amps 415V (Heavy Duty) , Main Switches Spn 32 Amps , Main Switches Tpn 32 Amps , Main Switches Tpn 63 Amps , Main Switches Tpn 100 Amps , Main Switches Tpn 315 Amps , 63A 4Pmc Changeover Switch , 100A 4Pmc Changeover Switch , Automatic On/Off Street Light Timer Switch With 24Hrs 7 Days Programable Digital Timer Clock, 40 Amps 4 Pole Contactor With Coil, Mcb Switch And Connector Fully Wired With All Accessories , Street Light Meter/Main Box With Wooden Board, Main Switch, Fuse Carrier Fully Wired With All Accessories , Electronic 7 Days 24 Hrs Programable Ditial Timer Clock , 63 Amps 4 Pole Contact With Coil , 220V - 250V Contactor Coil , Power Capacitor , 9W Led Bulb , 15W Led Bul
Contract Date: May 30, 2026 Contract Value : 7.15 Lakh
Local Bodies No of Bidders 2
41.
Defence #11191247 Price Bid
Tender for M&L Servicing Of Indoor And Outdoor Unit Of Split Type/ Window Ac Of 1.5/2.0/3.0 Ton Capacity Of Any Make By Air Blowing, Cleaning The Filter In Water And Drying In Sun, Cleaning Of Drain Tray And Rectifing Water Leak, Checking And Tightning The Electrical Connection Incl Provide Insulation Material On Cooling Coil And Heating Coil Etc All As Specified And Directed By Engr-In-Charge. , Supply And Refilling Gas/Refrigerant (Cfc Free) In Ac Split Type/Window 1.5 Ton / 2 Ton Complete All As Specified And Directed By Engr-In-Charge. , Supply And Refilling Gas/Refrigerant In Refrigerator Having Capacity 165 To 315 Ltr Complete All As Specified And Directed By Engr-In-Charge. , Supply And Refilling Gas Charging In Water Cooler Of Capacity Upto 60/120 Ltr Complete All As Specified And Directed By Engr-In-Charge. , Supply, Fixing And Commissioning Of Compressor For Window, 1.5 Ton Capacity Air Conditioner (Ac) Complete All As Specified And Directed By Engr-In-Charge. Make:Lg/Hitachi/Gmcc/Emerson. , Supply, Fixing And Commissioning Of Compressor For Split Ac, 1.5 Ton Capacity Complete All As Specified And Directed By Engr-In-Charge. Make:Lg/Hitachi/Gmcc/Emerson. , Supply, Fixing And Commissioning Of Compressor Split And Window, 2 Ton Complete All As Specified And Directed By Engr-In-Charge. Make:Lg/Hitachi/Gmcc/Emerson , Supply, Fixing And Commissioning Refrigerator Compressor Of Capacity 165 To 180 Ltr Complete All As Specified And Directed By Engr-In-Charge. , Supply, Fixing And Commissioning Refrigerator Compressor Of Capacity 210 To 315 Ltrs Complete All As Specified And Directed By Engr-In-Charge. , Supply, Fixing And Commissioning Water Cooler Compressor Of Capacity 40/80 Ltr Complete All As Specified And Directed By Engr-In-Charge. , Supply, Fixing And Commissioning Water Cooler Compressor Of Capacity 60/120 Ltr Complete All As Specified And Directed By Engr-In-Charge. , Supply, Fixing And Commissioning Of Relay For Split And Window Ac Upto Capacity 2 Ton Complete All As Specified And Directed By Engr-In-Charge. , Supply, Fixing And Commissioning Of Relay For Refrigerator Upto 315 Ltr Capacity Complete All As Specified And Directed By Engr-In-Charge. , Supply, Fixing And Commissioning Of Pcb For Split/Window Ac Including Inverter Split Ac Upto 2 Ton Capacity Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Electronic Control Pcb For Refrigerator Upto 315 Ltr Capacity All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Thermostat Of Window/Split Ac Of Any Capacity Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Thermostat Of Refrigerator Any Capacity Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Thermostat Of Water Cooler Of Any Capacity Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Blead With Motor Split/Window Ac Of Capacity 1.5 Tr To 2 Tr Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Fan Motor Water Cooler Of Capacity Upto 60/120 Ltr Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Swing Motor For Split Ac Of Any Capacity Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Cooling Coil For Window/Split Ac For Any Capcity And Size Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Heating Coil/Condenser Coil For Split/Window Ac 1.5 Tr To 2 Tr Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Reverse Valve Of Ac/Refrigerator/Water Cooler Complete All As Specified And Directed By Engr-In-Charge. , Supply, Fixing And Commissioning Condenser 50 Mfd For Split/Window Ac Upto 2 Ton Capacity Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Timer Switch For Refrigerator Of Any Capacity Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Remote Unit For Split Type Ac Of Any Model/Size All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Water Cooler Pvc Pipe Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Float Valve 15 Mm For Water Cooler 40 To 120 Ltr Capacity All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Push Tap For Water Cooler Any Size/Capacity All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Repair Of Voltage Stabilizer Of Capacity 4/2/1 Kva, Single Phase, 230 V Ac, 50 Hz All As Specified And Directed By Engr-In-Charge. , Supply And Fixing Led Security/Street Light Fittings 35 Watt 230V Ac Outdoor Type With High Pressure Die Cast Aluminium Housing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Inclding Thermal Management In Multiple Optics Complete With Ip 65/66 Protection With Gi Pipe Light Grade Bracket 1.2 Mtr Long 40 Mm Dia Fixed To Wall With Suitable Size 2 Nos Ms Clamps Including Nuts, Bolts And Washers And Making Connection With Using 1.5 Sqmm Pvc Insulated Multi Standard Copper Conductor Three Single Core Complete All As Specified And Diredted. , S & F Led Light Fitting 1X10wbulkhead Luminaires Including Led Light Driver Holder Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size. Make : Havells Cat Pat Hexaft10wled857ssymbopc Or Equivalent Cat Part In Make :- Havells/ Phillips/Bajaj/C&S Note:- Contractor Shall Submit 2 Year Warrenty Of Material From Manufracturer Alongwith Purchase Voucher. , Supply And Fixing Post Top Lantern Led Type 20Watt 230 Watt Volts Ac Outdoor Type With Decorative Post Top For 360 Degree Indirect Light Ip 65 Protection With Impact And Corrosion Resistant Complete With Driver And Lamp Complete. , Supply And Fixing Post Top Lantern Led Type 40 Watt 230 Watt Volts Ac Outdoor Type With Decorative Post Top For 360 Degree Indirect Light Ip 65 Protection With Impact And Corrosion Resistant Complete With Driver And Lamp Complete. , Supply And Fixing Led Flood Light 70 Watt, 230 V Ac Out Door Type With Thermal Management In Multiple Optics And Equipped With Ip66 Protection, With Impact And Corrosion Resistant Complete With Driver And Lamp And Average Life Of Flood Light Not Less Than 50000 Hours, Including Clamps, Nut, Bolts, Fixing In Wall Including 2 Sqmm Pvc Twin Core Aluminium Cable From Conductor To Street Light Not Less 2.0 Metre , Testing To Satisfaction Of Engineer In Charge Complete All As Specified And Directed. , Supply And Fixing Or Passing Through Pipe, Stranded Conductor 6 Sqmm, 1100 Volts Grade Heavy Duty Cable With Pvc Insulated Aluminium Conductor Served With An Inner Sheathing Of Pvc Tape And Overall Pvc Sheathed In Service Connections Suspended By Insulating Hangers No More Than 1 Meter Apart Including 4 Mm Suspension Wire, One Twin Core Cable Flat Or Circular Etc All As Specified And Directed. , -Ditto- But 10 Sqmm. , -Ditto- But 16 Sqmm. , Supply , Laying , Connecting , Testing And Commissioning Of 35 Sqmm 3.5 Core Under Ground Lt Cable Xlpe Insulated Screend , Pvc Bedded, Armourd Heavy Duty Electric Cable With Stranded Aluminium Conducter 1100 Volts Laid In Trenches Fixed To Walls/ Drwan Through Pipe And Incl The Disturbance Surfaceof Road Making Goood With Using Plain Cement Concrete , Fixing The Cable With Suitable Size Glands , Crimping Type Lugs Etc All As Specified And Directed. Note :- ( Excavation , Eathwork , Sand Cusioning And Cable Protection Shall Be Measured And Paid Separately ). , -Ditto- But 16Sqmm 4 Core , Excavation In Trenches Not Exceeding 1.5 Mtr Wide, Depth Exceeding 1.5 Mtr And Getting Out In Hard/Dense Soil Complete All As Specified And Directed By Engineer-In-Charge , Returning, Filling Incl Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Hard/Dense Soil All As Specified And Directed. , Removing Excavated Material (Soil) Not Exc 50 Mtr And Depositing Where Directed At A Level Not Exc 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. , M&L For Dry Clean Sand Filling In Trenches Below And Around Under Ground Cable Cushioning Complete All As Specified And Directed.. Note :- Thickness Of Sand Cushioning Shall Be Measured After Punning. , Supplying And Laying Un-Reinforced Precast Concrete Cable Cover Class Hv Type 1 Flat Size 300X180mmx40mm Complete All As Specified And Directed
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Uttarakhand View Result →
42.
Educational and Research Institute #11182295 AOC
Bids Are invited for Calibration Beaker - 100 Ml , Beaker - 150 Ml , Beaker - 250 Ml , Beaker - 500 Ml , Beaker Plastic - 100 Ml , Volumetric Flask - 50 Ml , Volumetric Flask - 100 Ml , Volumetric Flask - 200 Ml , Volumetric Flask - 250 Ml , Volumetric Flask - 500 Ml , Volumetric Flask - 1000 Ml , Measuring Cylinder - 5 Ml , Measuring Cylinder - 10 Ml , Measuring Cylinder - 25 Ml , Measuring Cylinder - 50 Ml , Measuring Cylinder - 100 Ml , Measuring Cylinder - 500 Ml , Measuring Cylinder - 1000 Ml , Pipette - 1 Ml , Pipette - 2 Ml , Pipette - 5 Ml , Pipette - 10 Ml , Pipette - 25 Ml , Burette - 50 Ml , Thermometer - 10 To 100 Degrees , Weight Box No.1 - 1 Mg To 100 G , Weight Box No.2 - 1 Mg To 200 Mg , Dry Bulb And Wet Bulb Thermometer - 1 Deg C To 50 Deg C , Micropipette - 5 To 50 Ul , Micropipette - 1 To 5 Ml , Micropipette - 0.1 Ml To 1.0 Ml , Electronic Micro Balance - ( 0.001 Mg To 2 G) , Analytical Balance - ( 2 Mg To 420G) , Analytical Balance - ( 2 Mg To 210G) , Analytical Balance - (1 Mg To 510G) , Analytical Balance - (1 Mg To 420G) , Turbidity Meter - (0 To 1000 Ntu) , Microlit E Burette - 0 To 50 Ml , Hanna Do Meter - Calibration Of Hanna Do Meter , Water Testing Kit Labtronics - Ph, Do , Ec , Salinity , Hydrometer - (5 To 60) , Top Loading Calibrator - Calibration To Top Loading Calibrator , Hanna Ph Meter - Calibration Of Hanna Ph Meter , Table Top Ph Meter - Calibration Of Table Top Ph Meter , Dry Gas Meter - Calibration To Dry Gas Meter , Hanna Tds Meter - Calibration Of Hanna Tds Meter , Hot Air Oven Digital Temperature Controller - Temp Range 50 Deg C To 150 Deg C , Water Bath Digital Temperature Controller - Temp Range 30 Deg C To 110 Deg C , Rotary Evaporator Digital Temperature Controller - Temp Range 50 To 150 Deg. C , Noise Level Meter - 30Db(A) To 130 Db(A) , Cod Digestor - Temperature Range 100Deg C To 150Degc, , Bod Incubator - Temperature Range 10Deg C To 30Deg C , Hot Plate - Temperature Range , Top Loading Orifice Calibrator - Calibration Top Loading Orifice Calibrator , Muffle Furnace - Temperature Range , Autoclave - Pressure Gauge , Magnetic Stirrer With Hot Plate - Temperature & Rpm , Deep Freezers - (Minus)4 Deg C To 4 Deg C , Digital Conductivity Meter - At 1413 Us/Cm , Lux Meter - Calibration Of Lux Meter , Stop Watch - Timer 0 Min To 180 Min , Noise Level Calibrator - 94 /115 Db(A) Total Quantity : 136
Contract Date: Ref. Documents Contract Value : 70,530
Government Departments No of Bidders 3
43.
Public Administrative Department #11181076 AOC
Tender For Inviting Rates For Motor Pump Repairing And Electric Material Supply , Inviting Rates For Motor Pump Repairing And Electric Material Supply , Motor Wire Binding 25 Hp Turbine Pump , Motor Wire Binding 40 Hp Turbine Pump , Motor Wire Binding 50 Hp Turbine Pump , Motor Wire Binding 40 Hp Centrifugal Pump , Motor Wire Binding 50 Hp Centrifugal Pump , Motor Wire Binding 100 Hp Crompton Motor , Motor Wire Binding 35 Hp , Motor Wire Binding 30 Hp , Motor Wire Binding 20 Hp , Motor Wire Binding 12.50 Hp , Motor Wire Binding 10 Hp , Motor Wire Binding 7.5 Hp , Motor Wire Binding 6 Hp , Motor Wire Binding 5 Hp , Thrust Bering Bush G.S. 35 Hp , Thrust Bering Bush G.S.30 Hp , Thrust Bering Bush G.S. 20 Hp , Thrust Bering Bush G.S. 12.50 Hp , Thrust Bering Bush G.S. 10 Hp , Thrust Bering Bush G.S. 7.5 Hp , Thrust Bering Bush G.S.6 Hp , Thrust Bering Bush G.S.5 Hp , Thrust Bering 35 Hp , Thrust Bering 30 Hp , Thrust Bering 20 Hp , Thrust Bering 12.50 Hp , Thrust Bering 10 Hp , Thrust Bering 7.5 Hp , Trust Bering 6 Hp , Thrust Bering 5 Hp , Rotor Sleep Steel 35 Hp , Rotor Sleep Steel 30 Hp , Rotor Sleep Steel 20 Hp , Rotor Sleep Steel 12.50 Hp , Rotor Sleep Steel 10 Hp , Rotor Sleep Steel 7.5 Hp , Rotor Sleep Steel 6 Hp , Rotor Sleep Steel 5 Hp , Housing Bush Bearing35 Hp , Housing Bush Bearing30 Hp , Housing Bush Bearing20 Hp , Housing Bush Bearing12.50 Hp , Housing Bush Bearing10 Hp , Housing Bush Bearing7.5 Hp , Housing Bush Bearing6 Hp , Housing Bush Bearing5 Hp , Housing Bush Rubber35 Hp , Housing Bush Rubber30 Hp , Housing Bush Rubber20 Hp , Housing Bush Rubber12.50 Hp , Housing Bush Rubber10 Hp , Housing Bush Rubber7.5 Hp , Housing Bush Rubber 6 Hp , Housing Bush Rubber 5 Hp , Oil Seal 35 Hp , Oil Seal 30 Hp , Oil Seal 20 Hp , Oil Seal 12.50 Hp , Oil Seal 10 Hp , Oil Seal 7.5 Hp , Oil Seal 6 Hp , Oil Seal 5 Hp , Rubber Ring Kit 35 Hp , Connection Plate 35 Hp , Connection Plate 30 Hp , Connection Plate 20 Hp , Connection Plate 12.50 Hp , Connection Plate 10 Hp , Connection Plate 7.5 Hp , Connection Plate 6 Hp , Connection Plate 5 Hp , Ball Bearing 35 Hp , Ball Bearing 30 Hp , Ball Bearing 20 Hp , Ball Bearing 12.50 Hp , Ball Bearing 10 Hp , Ball Bearing 7.5 Hp , Ball Bearing 6 Hp , Ball Bearing 5 Hp , Air Fan (Hava Pankhi)100 Hp , Air Fan (Hava Pankhi)35 Hp , Air Fan (Hava Pankhi)30 Hp , Air Fan (Hava Pankhi)20 Hp , Air Fan (Hava Pankhi)12.50 Hp , Air Fan (Hava Pankhi)10 Hp , Air Fan (Hava Pankhi)7.5 Hp , Air Fan (Hava Pankhi)6 Hp , Air Fan (Hava Pankhi)5 Hp , Rotor Shaft Repairing 100 Hp , Rotor Shaft Repairing35 Hp , Rotor Shaft Repairing30 Hp , Rotor Shaft Repairing20 Hp , Rotor Shaft Repairing12.50 Hp , Rotor Shaft Repairing10 Hp , Rotor Shaft Repairing7.5 Hp , Rotor Shaft Repairing6 Hp , Rotor Shaft Repairing5 Hp , Ampler Brass 100 Hp , Ampler Brass 35 Hp , Ampler Brass 30 Hp , Ampler Brass 20 Hp , Ampler Brass 12.50 Hp , Ampler Brass 10 Hp , Ampler Brass 7.5 Hp , Ampler Brass 6 Hp , Ampler Brass 5 Hp , Ampler Stainless Steel 35 Hp , Ampler Stainless Steel 30 Hp , Ampler Stainless Steel 20 Hp , Ampler Stainless Steel 12.50 Hp , Ampler Stainless Steel 10 Hp , Ampler Stainless Steel 7.5 Hp , Ampler Stainless Steel 6 Hp , Ampler Stainless Steel 5 Hp , Ampler (Fiber)35 Hp , Ampler (Fiber)30 Hp , Ampler (Fiber)20 Hp , Ampler (Fiber)12.50 Hp , Ampler (Fiber)10 Hp , Ampler (Fiber)7.5 Hp , Ampler (Fiber)6 Hp , Ampler (Fiber)5 Hp , Coupling Bush 100 Hp , Coupling Bush 35 Hp , Coupling Bush 30 Hp , Coupling Bush 20 Hp , Coupling Bush 12.50 Hp , Coupling Bush 10 Hp , Coupling Bush 7.5 Hp , Coupling Bush 6 Hp , Coupling Bush 5 Hp , Pump Fitting Charge100 Hp , Pump Fitting Charge35 Hp , Pump Fitting Charge30 Hp , Pumpfitting Charge20 Hp , Pumpfitting Charge12.50 Hp , Pump Fitting Charge10 Hp , Pump Fitting Charge7.5 Hp , Pump Fitting Charge6 Hp , Pump Fitting Charge 5 Hp , Relay Oil Wali 35 Hp , Relay Oil Wali 30 Hp , Relay Oil Wali 20 Hp , Relay Oil Wali 12.50 Hp , Relay Oil Wali 10 Hp , Relay Oil Wali 7.5 Hp , Relay Oil Wali 6 Hp , Relay Oil Wali 5 Hp , Relay 35 Hp , Relay 30 Hp , Relay 20 Hp , Relay 12.50 Hp , Relay 10 Hp , Relay 7.5 Hp , Relay 6 Hp , Relay 5 Hp , Base Point 35 Hp , Base Point 30 Hp , Base Point 20 Hp , Base Point 12.50 Hp , Base Point 10 Hp , Base Point 7.5 Hp , Base Point 6 Hp , Base Point 5 Hp , Jhula Point 35 Hp , Jhula Point 30 Hp , Jhula Point 20 Hp , Jhula Point 12.50 Hp , Jhula Point 10 Hp , Jhula Point 7.5 Hp , Jhula Point 6 Hp , Jhula Point 5 Hp , Magnet Quire(Quile)35 Hp , Magnet Quire(Quile)30 Hp , Magnet Quire(Quile)20 Hp , Magnet Quire(Quile)12.50 Hp , Magnet Quire(Quile)10 Hp , Magnet Quire(Quile)7.5 Hp , Magnet Quire(Quile)6 Hp , Magnet Quire(Quile)5 Hp , Spare Point Starter35 Hp , Spare Point Starter30 Hp , Spare Point Starter20 Hp , Spare Point Starter12.50 Hp , Spare Point Starter10 Hp , Spare Point Starter7.5 Hp , Spare Point Starter6 Hp , Spare Point Starter5 Hp , Magnet Thiya 35 Hp , Magnet Thiya 30 Hp , Magnet Thiya 20 Hp , Magnet Thiya 12.50 Hp , Magnet Thiya 10 Hp , Magnet Thiya 7.5 Hp , Magnet Thiya 6 Hp , Magnet Thiya 5 Hp , Starter Oil , Labour Charge For Starter 35 Hp Fitting , Labour Charge For Starter 30 Hp Fitting , Labour Charge For Starter 20 Hp Fitting , Labour Charge For Starter 12.50 Hp Fitting , Labour Charge For Starter 10 Hp Fitting , Labour Charge For Starter 7.5 Hp Fitting , Labour Charge For Starter 6 Hp Fitting , Labour Charge For Starter 5 Hp Fitting , Starter Panel Board 5 Hp , Starter Panel Board 7.5 Hp , Starter Panel Board 10 Hp , Starter Panel Bord 20 Hp , Starter Panel Board 50 Hp , Turbine Section Rubber Brass 25 Hp , Turbine Section Saft 25Hp , Turbine Brass Bush (Gm)25Hp , Tubelight Rod 4 Feet (40 Watt) , Copper Wire 3/20 Per Bunddle Isi Mark , Copper Wire 1/18 Per Bunddle Isi Mark , Copper Wire Flexible Per Bunddle Isi Mark , Cutout 32 Ampere , Cutout 63 Ampere , Cutout 16 Ampere , Cutout 100 Ampere , Bulb Holder Pendent , Plug Socket Three Pin 5 A.A.O. , Plug Socket Three Pin 3 A.A.O. , Plug Socket Three Pin 2 A.A.O. , Switch 5 Annual Periodical Maintenance , Main Switch 30 Annual Periodical Maintenance , Main Switch 63 Annual Periodical Maintenance , Main Switch 100 Annual Periodical Maintenance , Main Switch 200 Annual Periodical Maintenance With Side Handle Hrc Fuse , Main Switch 400 Annual Periodical Maintenance With Side Handle Hrc Fuse , Board 10×12 (Modula Punch Box) , Board 8×10(Modula Punch Box) , Board 8×4 (Modula Punch Box) , Board 7×4 (Modula Punch Box) , Board 4×4 (Modula Punch Box) , Casing Patti .P.V.C. (Different Size) , Elvo ,P.V.C. , T.P.V.C. , External P.V.C. , Pench 2½ Steel Internal P.V.C. , Pench 1½ Steel , Pench ¾ Steel , Pench ½ Steel , Pipe Band ¾ Pipe , Pipe Band ½ Pipe , Flood Lighting Series 1×200 Watt , Power Saver Fixture 4×24 Watt , Power Saver Fixture 2×24 Watt , L.E.D. 15 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 30 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 50 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 90 Watt Flood Light Complete Isi/Iso Certified With Warranty , L.E.D. 100 Watt Flood Light Complete Isi/Iso Certified With Warranty , A.C. Aluminium Wire 12 Sqm M.M 300 Feet , A.C. Aluminium Wire 10 Sqm M.M 300 Feet , 2 Feet 24 Watt Tube Rode , 2 Feet 24 Watt Electronic Choke , M.C.V. S.S. 10A. With End Box , M.C.V. S.S. 15A. With End Box , M.C.V. S.S. 20A.With Endbox , M.C.V. S.S. 25A.With Endbox , M.C.V. S.S. 32A.With End Box , M.C.V. S.S. 63A. Withend Box , 24 Watt Rod Holder , Multi Copper Wire 0.75 Sqm.M. , Multi Copper Wire 1 Sqm.M. , Multi Copper Wire 1½ Sqm.M. , Multi Copper Wire 2 Sqm.M. , Multi Copper Wire 2½ Sqm.M. , Multi Copper Wire 4 Sqm.M. , Multi Copper Wire 6 Sqm.M. , Multi Copper Wire 8 Sqm.M. , Multi Copper Wire 10 Sqm.M. , Multi Copper Wire 16 Sq M.M. , Starter 7.5 Hp , Led Bulb 12 Watt Isi Certified Compny With Warranty , Led Bulb 15 Watt Isi Certified Compny With Warranty , Led Bulb 18 Watt Isi Certified Compny With Warranty , Led Bulb 23 Watt Isi Certified Compny With Warranty , Led Bulb 27 Watt Isi Certified Compny With Warranty , Led Bulb 32 Watt Isi Certified Compny With Warranty , Led Bulb 40 Watt Isi Certified Compny With Warranty , Pluck Socket 3 Pin 15 Annual Periodical Maintenance , Switch 15 Annual Periodical Maintenance , Armoured Cable 8 Sqm.M. (Lead) 2 Core Aluminium , Armoured Cable 10Sqm.M. (Lead) 2 Core Aluminium , Armoured Cable 12 Sqm.M. (Lead) 2 Core Aluminium , Armoured Cable 25Sqm.M. (Lead) 4 Core Aluminium , Lt Cable 35 Sqm.M. (Lead) 4 Core Aluminium , Ltcable 50 Sqm.M. (Lead) 4 Core Aluminium , Lt Cable 50 Sqm.M. (Lead)5 Core Aluminium , Aluminium Wire 6 Sqmm , Aluminium Wire 8 Sqmm , Aluminium Wire 10 Sqmm , Aluminium Wire 12 Sqmm , Aluminium Wire 14 Sqmm , Aluminium Wire16 Sqmm , Exhaust Fan 9 Inch , Exhaust Fan 12 Inch , Exhaust Fan 14 Inch , Pvc Wire 4 Sqm Copper Coil , Pvc Wire 2.5 Sqmcopper Coil , Pvc Wire 1.5 Sqm Copper Coil , Pvc Wire 1Sqmcopper Coil , Aluminium Wire 4 Sqm Aluminium Cable , Aluminium Wire 6 Sqm Aluminium Cable , Aluminium Wire 8 Sqm Aluminium Cable , 2 Core Cable 4 Sqmaluminium Coil , 2 Core Cable 12 Sqm Aluminium Coil , 2 Core Cable 6 Sqm Aluminium Coil , 2 Core Cable 8 Sqm Aluminium Coil , 2 Core Cable 10 Sqm Aluminium Coil , 3 Core Cable 4 Qsm Aluminium Coil , 3 Core Cable Sqmaluminium Coil , 3 Core Cable 8 Sqm Aluminium Coil , 3 Core Cable 2.5 Sqm Aluminium Coil , 2*24 Energy Saver Rod For Street Light , 2*36 Energy Saver Rod For Street Light , 2*24 Energy Saver Choke For Street Light , 2*36 Energy Saver Choke For Street Light , 4*36 Energy Saver Choke For Street Light , Fuse Wire , Grander Cutter 800 Watt , Drill Machine 1200 Watt , Energy Saver Rod Holder 36 Watt , Energy Saver Rod Holder 24 Watt , Rechargable Bulb 60 Watt , Rechargable Bulb 12 Watt , Air Heater 2000 Wt , Led Light Strips , Fixture 2*36 , Fixture 4*36 , Clamp 1*1 , Clamp 11.5 , Clamp 2*2 , Kachchi Rubber , Ceiling Fan Energy Saver 60W , 1400 Mm Sweep , Tape Roll , Cooler 70 Ltr Isi Cetified Compney With Warranty , Cooler 90Ltr Isi Cetified Compney With Warranty , Cooler 100 Ltr Isi Cetified Compney With Warranty , Cooler Motoer , Cooler Water Pump , Cooler Pankhi , Cooler Honey Comb Pad , Air Conditioner 1 Ton Five Star Ratting With Complete Fitting , Air Conditioner 1.5 Ton Five Star Ratting With Complete Fitting , Air Conditioner 2 Ton Five Star Ratting With Complete Fitting , Invertar 800 Va , Invertar 1000 Va , Invertar1200va , Bettary 100 Amh Tubelar , Bettary 120 Amh Tubelar , Bettary 150 Amh Tubelar , Bettary 180 Amh Tubelar , Capicitar 2.5 Mfd , Capicitar 4 Mfd , Capicitar 3.15 Mfd , Electric Tool Box Tapariya With Eqipment , Garden Decorative Lamp Post With Light Pvc 8 Inch , Garden Decorative Lamp Post With Light Pvc 12Inch , Garden Decorative Lamp Post With Light Pvc 14 Inch , Garden Decorative Lamp Post With Light Metal 8 Inch , Garden Decorative Lamp Post With Light Metal 12Inch , Garden Decorative Lamp Post With Light Metal 14 Inch , Led Strip Light Water Proof For Garden , Multi Colour Changing 4 Way Outdoor Exterior Wall Light Metal Body For Garden , Junction Box Pvc , Led Acrylic Sign Board Complete Frame With Fitting Labour Charge , Junction Box Pvc 25 Mm One Way , Junction Box Pvc 25 Mm Two Way , Junction Box Pvc 25 Mm Three Way , Junction Box Pvc 25 Mm Four Way , Junction Box Pvc32 Mm One Way , Junction Box Pvc 32 Mm Two Way , Junction Box Pvc 32 Mm Three Way , Junction Box Pvc 25 Mm Four Way , Junction Box Pvc 18 Mm One Way , Junction Box Pvc 18 Mm Two Way , Junction Box Pvc 18 Mm Three Way , Junction Box Pvc 18 Mm Four Way , Stabliser Automatic , Stabliser Autocut , Stabliser Servo , Rgb Switcher With Power Supply Complete Fitting , Autocut Timer Panel 63 Annual Periodical Maintenance , Autocut Timer Panel 100 Annual Periodical Maintenance , Autocut Timer Panel 400 Annual Periodical Maintenance , Invertar 800 Va Ups , Invertar 1000 Va Ups , Invertar1200v Aups , Battery Acid , Battery Distaled Water , Change Over 63 Annual Periodical Maintenance , Change Over 100 Annual Periodical Maintenance , Change Over 400 Annual Periodical Maintenance , Wall Washer Light Waterproof , Projecter Light Waterproof , Spot Light Waterproof , Silencer Light
Contract Date: May 28, 2026 Contract Value : 1.70 Crore
Local Bodies No of Bidders 6
Madhya Pradesh View Result →
44.
Tourism #11175186 Price Bid
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation In Trenches For All Leads & Lifts In All Type Of Strata Comprising Of Any Type Of Materials Either In Full Or Part As The Case May Be Adopting Any Method/Methods As May Be Convenient As Permitted Excluding Blasting In All Conditions Such As Dry, Moist, Foul, Saturated, Submerged, Etc,. Including Dressing Of Sides, Planking & Strutting, Timbering ,Ramming Of Bottom ,Pumping And Bailing Out Water ,Barricading Danger Lighting Guarding, Getting Out Excavated Soil & Stacking As Directed By Engineer For All Leads & Lifts Etc. Complete , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Supplying And Filling In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. Moorum , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading, Transportation, Unloading, Levelling Etc At The Risk And Cost Of Agency / Contractor Including Selection Of Site For Disposal With All Lifts And Leads Etc. All Complete. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continious Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level. M-30 Grade Of Concrete , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Foundations, Footings, Bases For Columns , Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates. I.Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc.String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Providing And Laying In Position Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 40 M Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing : In Retaining Walls , Return Walls(Any Thk) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Providing And Fixing Exposed Laterite Stone Of 100 Mm Thk For Dado ,Laid On Cement Mortar Paste 1:4 (1 Cement : 4 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Stone Including Rubbing Including Applying Acrylic Varnish Etc Complete. As Per Designs And The Directions Of The Engineer-In-Charge. , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And And Laying Vitrified Floor Tiles In Different Sizes Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make In Colours And Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigment Etc., Complete. 600X 600 Mm Dark Shades , Providing And Laying Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Lakha Red , Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid . Plain White Makrana Slab 25Mm Thick , Marble Stone Flooring With 18 Mm Thick Marble Stone (Sample Of Marble Shall Be Approved By Engineer-In-Charge) Over 20Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement:4 Coarse ) Using : White Makrana Marble , Providing And Laying 300X350x160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 75 Mm Gap Between Two Stone For Grassing.Gaps To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.(Price Including Stone,Gardening Soil,Fertilizers And Grass Etc Complete). , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. Size 30 Cm Lx 40 Cm H X 15 Cm T , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Demolishing Reinforced Cement Concrete Work Including Stacking Of Steel Bars & Disposal Of Unserviceable Within 50 Steel Bars & Disposal Of Unserviceable Within 50 , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. 12 Mm Cement Plaster 1 :3 ( 1 Cement : 3 Sand) , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Providing & Fixing 19Mm Thk Plywood Work In Frames Of Doors Using 19Mm Marine Ply (Waterproof) With All Hardware,And Other Frames And Fixed In Position With 50 Mm Fastners Etc. Complete As Specified As Shown In The Drawings. , Providing And Fixing First Class Indian Teak Wood Moulded Beading To Door And Window Frames With Iron Screws, Plugs And Priming Coat On Unexposed Surfaces Etc. 50 X 12 Mm , Providing And Fixing Block Board Flush Door Shutters 35Mm Thick ( 1St Class Teak Ply On Both Faces), Laminated On Both Sides With 1Mm Thick Laminate Of Approved Brand And Colour Including Cost Of Adhesive, Nails, Screws During Fixing Etc. Complete. , Providing & Fixing Bright Finished Stainless Steel Mortise Latch & Lock With 60 Mm Cylinder And A Pair Of Levers, Handles With Necessary Screws Etc.Complete , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete. 250 X 16X 5Mm , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete Size 125 X 70 X 4.0Mm , Providing And Fixing 150 Mm. Bright Finished Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutter Thickness Complete. , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete , Providing And Applying Decorative Plastering For A Window Sorrounding, Using 1:4 Morter Mixture With Bricks Chips,Featuring A 300Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer. (The Job Involves Applying A Decorative Finish Over Underlying Structure, Incorporation Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Double Piller At The Corner (Ht 3.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Center (Ht 3.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Center For Hall(Ht 2.10 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 200Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Arch Of Span Of 3Mt., Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Flowers At The Ceiling With Dia. 1.20Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering Ofr Cornice At Ceiling In Hall Of Ht 0.40Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Construction And Installation 6Mt Height Replica Of Shree Suptakoteswar Stumb Using Sadhahalli Grey Granite Stone With Intricate Carvings, Moulding As Per Drawing. The Structure Should Have 6Mt Ht. With 2.5 X2.5X0.70 Mt Ht At Base And Stumb Of 1.50X1.50X5.25 Mt Height At Top As Per Details Drawings And Direction By The Engineer. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Paduka For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A 150Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Padma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Kumuda For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Adhopadma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Big Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2100Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Karnakuta ), Using 1:4 Morter Mixture With Bricks Chips, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1500Mm Height ,750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Cornice ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 750Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1200Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Adhopadma For Sajja), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Cornice Above Adhopadma ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Yalli ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Electrical Works , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 1/2 Core 70Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 1.5 Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 2.5 Sq.Mm , Supply Of 4 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core 2.5 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required.(A) In Soily Strata , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 70 Sq. Mm. , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator)(K) 12 Way (8+36), Double Door, Horizontal Type Cat B , Supplying And Fixing 40 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(E) Tpn, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C -- With Cat B Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required.B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required.(C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.A) 20 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.B) 25 Mm , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Requiredd) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Requireda) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required(A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Requiredb) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required(C) 6 Module (200Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Requiredsitc Of Wall Fan,600 Mm Sweep, With All Accessories. , Supply Installation Testing And Commissioning Of 8-10 W Spot Light Cob Ip65 Light With System Efficacy Of 100 Lm/W.L70 Life Of 50000 Hrs. P.F.0.95 With Thd10% ,Cct 5700 K,Cri 70,Surge Protection 4 Kv. Input Voltage Range Of 120V To 300V.Certification:- Lm79 & Lm80 Test Report Should Be From Govt Approved Inhouse Nabl Lab/ Government Of India Authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj As Required And Directed By Engineer Incharge , Supply Installation Testing And Commissioning Of W 80W Flood Light Ip65 Light With System Efficacy Of 100 Lm/W.L70 Life Of 50000 Hrs. P.F.0.95 With Thd10% ,Cct 5700 K,Cri 70,Surge Protection 4 Kv. Input Voltage Range Of 120V To 300V.Certification:- Lm79 & Lm80 Test Report Should Be From Govt Approved Inhouse Nabl Lab/ Government Of India Authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj As Required And Directed By Engineer Incharge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply Installation Testing and Commissioning of Decorative Chandelier Having Finest Crystals In Chrome Finish, Material -Mirror Stainless Steel, Dimensions (Mm) -Dia. =600X1500(H),Lamp Base- G9, Wattage- 7X42w Max, Complete With All Accessories. , Supply Installation Testing and Commissioning of Decorative Chandelier Having Finest Crystals In Chrome Finish, Material -Mirror Stainless Steel, Dimensions (Mm) -Dia. =1200X1500(H),Lamp Base- G9, Wattage- 12X42w Max, Complete With All Accessories. , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark,Of Approved Brands, Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. With Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineerincharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe. G)Watering Arrangement(Plumbing Will Be Paid Seperately). , Supply Installation Testing and Commissioning of 12W Multi Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 12W, Cct : Rgbw, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 400Mm. , Supply Installation Testing and Commissioning of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 80W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo Separate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 300Mm. , Supply Installation Testing and Commissioning of High Quality Multi Color Neon Flexible Light, Protection Rating : Ip65, Mounting Structure : Adjustable Wall Mount Ss Clips For Fixing The Lights. Power Consumption : 12W, Cct : Rgb/Rgbw, (As Per The Design Approval) Beam Angle : 120º, Control : Dmx512 Channel : 4 Ch, Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Time Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Epistar, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. , Supply Installation Testing and Commissioning of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 50W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 300Mm. , Supply Installation Testing and Commissioning of Aluminium Profile For Neon Flex , Supply Installation Testing and Commissioning of Dc Power Driver For The Above Lights, Power : 200W, Input : Ac 110-240V Ac, 50Hz, Output : Dc 12/24V, Protection Rating, Ip67, Surge Protection : Ll 4Kv, Le 6Kv , Supply Installation Testing and Commissioning of High Quality Dmx Decoder, Power Input : Dc 24V , Supply Installation Testing and Commissioning of Pvc Insulated Multi Core Electrical Un Armoured Flexible 5C X 0.5Sq Mm Power Cable Having Less Electrical Losses. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of 5 Core Dmx Cable Comprises Twisted Pairs With Shield Support For Carrying Of Data. Dmx512 Cable Is Used For Connecting All Light Consoles That Use Dmx 512 Standard Data Transmission. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete For Both Power And Dmx. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of Ip65 I Power Connectors Having 3/4 Pole Cable Connector, Chuck Type Strain Relief, Current Rating 20 A Rms Continuous, Easy And Extremely Precise Locking System Quick Lock High Impact Materials - Long-Lasting And Reliable , Supply Installation Testing and Commissioning of Ip65 I Dmx Connectors Having 3/5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of 5 Pin Xlr Male Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of 5 Pin Xlr Female Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of Power Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options. - 12 Nos Of 6/10A Sp Outgoing Mcbs. - 1No Of 32A Tpn Incoming Mcb. , Supply Installation Testing and Commissioning of Ip Driver Box Made Up Of Pvc / Upvc And Ivory Connectors For The Internal Terminations And External Outgoing Connecting Points, Fiber / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. , Supply Installation Testing and Commissioning of Dmx Isolator Or Splitter Provides Isolated Optical Dmx Splitter Provides 8 Outputs From A 1 Input And Input Voltage: Ac 110 To 220 V, 50 Hz, Product Features: Group 1 & Group 8 Dmx Signal Change. , Supply Installation Testing and Commissioning of Din Rail Mount Dmx Controller Can Be Used To Control A Wide Variety Of Different Dmx Systems- From Rgb/Rgbw To More Advanced Moving And Color Mixing Luminaires, Dmx Audio Players And Fountains. The Controller Comes With A Variety Of Features, Iphone/Ipad/Android Remote Control, Wi-Fi Facilities, Dry Contact Port Triggering And Flash Memory.Usb Connection • 1024 Dmx Channels Universe In Live Mode (Computer) • 8 Dry Contact Trigger Ports Via He10 Connector • Stand Alone Mode With 5 Area And 90+ Scenes, Mac Osx 10.6/10.7/10.8 - Windows Xp/Vista/Seven/8 32/64 Bits And Usb 2.0, Xlr3, Mini Usb, 1 He10, Power From 5V To 5.5V Dc (Ac/Dc Adapter In Option. , Supply Installation Testing and Commissioning of Programming Charges , Supply Installation Testing and Commissioning of Additional Accessories For Installing The Lights As Per The Final Drawing/Site Condition Consisting Of Clamps, Brackets, Angles, Conduits, Joints, Hardwares Like Fasteners, Nut & Bolts Etc., , Street Light Panel: Supply, Installation, Testing And Commissioning Of Lt Panel Ip- 67 Outdoor Type,Floor Mounted Panel, Shall Be Suitable For 415 V, 3 Phase, 4 Wire, 50Hz Supply System. With 3 Phase Energy Meter And 100A Tpn Mcb As Incommer And 11 Nos Of Tpn Mcb As Outgoing With 3 Numbers Of Microcontoller Based Programmable Digital Almac Timer As Directed By Engineer In-Charge
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
45.
Petroleum and Natural Gas #11172751 AOC
Bids Are invited for SIEVES - GI IS Test Sieves IS 460 Sieve set of internal dia 450 mmAperture size mm 100 80 63 40 20 16 12.5 10 4.75 2.36 lid and pan , SIEVES - GI IS Test Sieves IS 460 Sieve set of internal dia 200 mmAperture size mm 10 4.75 2.36 1.18Aperture size micron 600 300 150 75 lid and pan , SIEVES - Electric Sieve Shaker with timer capable of shaking sieve size of 200 mm to 450 mm diameter , Weighing Balance - Weighing Balance Electronic Capacity 50 kg Accuracy 2 gm , Weighing Balance - Weighing Balance Electronic Capacity 02 kg Accuracy 0.1 gm , Concrete Slump Test Apparatu - Concrete Slump Test Apparatus Slump Cone Steel Plate Tamping Rod Steel Scale Scoop , Compression Testing Machine - Compression Testing Machine 2000 kN Electrically Operated , Steel Cubes - Steel Cubes 150 mm for Concrete , Density Measurement - Apparatus for Density Measurement by Sand Replacement Method , Core Cutting Testing Apparatus - Core Cutting Testing Apparatus for Density Measurement 2 cores , Digital Moisture Meter , Thermometer - Thermometer 0 deg C to 100 deg C , Graduated Measuring Cylinder - Graduated Measuring Cylinder Each of 100 ml 250 ml 500 ml 1000 ml , Enamel Trays - Enamel Trays mm Approx 600 X 450 X 50 , Enamel Trays - Enamel Trays mm Approx 450 X 300 X 40 , Enamel Trays - Enamel Trays mm Approx 300 X 250 X 40 , Enamel Trays - Enamel Trays mm Approx Circular 250 , Vernier Calliper - Vernier Calliper Least Count 0.1 mm , Micro meter Screw Gauge Least Count 0.02 mm - Micrometer Screw Gauge Least Count 0.02 mm , Wire Gauge , Steel Tape - Steel Tape 30 m , Steel Tape - Steel Tape 15 m , Steel Tape - Steel Tape 5 m , Steel Tape - Steel Tape 3 m , Steel Scale - Steel Scale 1000 mm , Steel Scale - Steel Scale 30 mm , Steel Tape - Steel Tape 50 m , Allen key mm and inch , Electrical Testeing Rod - Electrical Tester , Megger , Auto Digital AC Clamp Meter , Dial Indicator for Pump and Motor Alignment , Vibration Tester , Photometer or Lux Meter , Stopwatch , Elco Meter , Roughness Meter , Lazer Distance Meter , Dew Point Measuring Instrument , Spirit Level , Plumb Bob , Screwdrivers , Handheld Mirror , Seam Paper , Long Nylon and Cotton Thread 200 M Long , Magnifying Glass , Ball Peen Hammer , Tool Box , Infrared Thermometer Gun - Infrared Thermometer Gun upto 300 degree Centigrade , Autolevel Total Quantity : 96
Contract Date: Ref. Documents Contract Value : 4.71 Lakh
Boards / Undertakings / PSU No of Bidders 7
Uttar Pradesh View Result →
46.
Public Administrative Department #11169193 AOC
Tender for Annual Tender 2026-2027 Supply And Delivery Of Street Light Materials For The Year Of 2026-27 In Vilathikulam Town Panchayat. , 4 Feet Flourescent Tube Light , 40W Copper Choke , 40W Tube Light Starter , 36W / 40W Tubelight Electronic Choke , Tube Light Side Lock Holder , Insluation Gum Tape Roll - Isi , 1/18 Vir Copper Wire [1/44] [90Mtr] , 3/20 Cts Copper Wire [3/36] [90Mtr] , 7/20 Cts Copper Wire [7/34] [90Mtr] , 7/16 Cts Copper Wire [7/67] [90Mtr] , 19/16 Cts Copper Wire [19/51] [90Mtr] , 1.5 Sq.Mm 3 Core Copper Cable , 2.5 Sq.Mm 3 Core Copper Cable , 4 Sq.Mm 3 Core Copper Cable , 6 Sq.Mm 3 Core Copper Cable , 10 Sq.Mm 3 Core Copper Cable , 16 Sq.Mm 3 Core Copper Cable , 36W 4Pin Lamp Holder , 36W Lamp Clip , 24W T5 Holder , Led Fitting Top Protection Glass - Street Light , Led Fitting Top Protection Glass - Flood Light , 20 / 25 Mm 1 No Gi Bend Pipe, With 2Nos Of Pole Clamps With Bolts And Nuts , 32 / 40 Mm 1 No Gi Bend Pipe, With 2Nos Of Pole Clamps With Bolts And Nuts , 6Amps To 32 Amps Sp Mcb , 40Amps 2Pole Isolator , 63Amps 4Pole Isolator , 32A D.P Switch , Mcb Box , Fuse Unit 16 Amps 240V , Fuse Unit 32 Amps 415V , Fuse Unit 63 Amps 415V , Fuse Unit 100 Amps 415V (Heavy Duty) , Fuse Unit 200 Amps 415V (Heavy Duty) , Fuse Unit 300 Amps 415V (Heavy Duty) , Fuse Unit 400 Amps 415V (Heavy Duty) , Fuse Unit 500 Amps 415V (Heavy Duty) , Main Switches Spn 32 Amps , Main Switches Tpn 32 Amps , Main Switches Tpn 63 Amps , Main Switches Tpn 100 Amps , Main Switches Tpn 315 Amps , 63A 4Pmc Changeover Switch , 100A 4Pmc Changeover Switch , Automatic On/Off Street Light Timer Switch With 24Hrs 7 Days Programable Digital Timer Clock, 40 Amps 4 Pole Contactor With Coil, Mcb Switch And Connector Fully Wired With All Accessories , Street Light Meter/Main Box With Wooden Board, Main Switch, Fuse Carrier Fully Wired With All Accessories , Electronic 7 Days 24 Hrs Programable Ditial Timer Clock , 63 Amps 4 Pole Contact With Coil , 220V - 250V Contactor Coil , Power
Contract Date: May 25, 2026 Contract Value : 6.75 Lakh
Local Bodies No of Bidders 2
47.
Defence #11164344 AOC
Bids Are Invited For Bib Cock Brass 15Mm , Bitumen Flash Strip 100Mm , Bitumen Flash Strip 50Mm , Cabinet Mirror , Cp Connection 600 X 15Mm With Brass Coupling And Nut And Washer , Door Handle Aluminium 100Mm , Door Handle Aluminium 125Mm , Door Handle Aluminium 75Mm , Door Seal Strip Aluminium 1 Mtr Wide , Door Stopper Aluminium , End Brackets Pair Cp 20 Mm Curtain Rod , End Covering Final For Curtain Rod , Fevicole Sh , Glass Panes Clear 4 Or 5Mm X 900Mm X 1200Mm , Glass Panes Clear 5Mm X 900Mm X 900Mm , Glass Shelvs Oval Shape 300Mm , Greating Pvc 100Mm , Greating Pvc 125Mm , Helical Door Closer , Kit For Low Level Cistern Pvc 10 Ltr Cap , Looking Glass Table Dressing Ladies 1220 X 365 X 5Mm With Frame , Looking Mirror 4Mm X 300Mm X 450Mm With Alumn Frame With 6Mm Ply On Back , Mixture For Wall Mixer Telephonic , Oil Putty For Glazing , Paint Pfu Se Black , Paint Pfu Se Grey , Paint Pfu Se Og , Paint Pfu Se Red Oxide , Paint Pfu Se White , Paint Yellow , Peg Brass , Plate Rack Stainless Steel 1050X600X200Mm , Plate Rack Stainless Steel 1050X600X250Mm , Ply Wood Teak Face 8 X 4 X 6Mm , Ply Wood Commercial 6 X 3 X 12Mm , Ply Wood Commercial 8 X 4 X 3Mm , Ply Wood Commercial 8 X 4 X 6Mm , Plywood 1 Side T Or F 8X4X4Mm , Plywood Commercial 8X4X4Mm , Plywood Commercial Bwr 8X4X12Mm , Plywood Commercial Bwr Grade 8X4X18 Mm Thick , Plywwood Teak Face 6X3X9 Mm , Polythene Connection 450 X 15Mm With Nut And Washer , Polythene Connection 600 X 15 Mm With Nut And Washer , Polythene Connection 900 X 15 Mm With Nut And Washer , Pre Laminated Board 2440 X 1220 X 18Mm Or 19Mm , Pvc Connection For Geyser 450X15 Mm , Pvc Waste Pipe 32Mm For Urinal , Pvc Waste Pipe 32Mm For Wb , Pvc Waste Pipe 900Mm , Shower Rose Pvc , Sink Stainless Steel 925X450X175Mm Thick , Sliding Bolt Aliminium 150Mm , Sliding Bolt Aliminium 200Mm , Sliding Door Bolt 200Mm Ms , Sliding Door Bolt Aluminum 250Mm , Sliding Door Bolt Aluminum 300Mm , Sliding Door Bolt Ms 250Mm , Sliding Door Bolt Ms 300Mm , Ss Greating Cp 100Mm , Ss Greating Cp 125Mm , Stainless Steel Handle , Stop Cock Cp 15Mm , Tower Bolt Aluminum 100Mm , Tower Bolt Aluminum 150Mm , Tower Bolt Aluminum 200Mm , Tower Bolt Aluminum 300Mm , Tower Bolt Ms 100Mm , Tower Bolt Ms 150Mm , Tower Bolt Ms 200Mm , Turpentuine Oil , Water Storage Tank 1000 Ltr , Water Storage Tank 500 Ltr , Aluminium Lugs Suitable For 185 Sqmm , Aluminium Lugs Suitable For 95 Sqmm , Aluminium Lugs Thimble Suitable For 35 Sqmm , Aluminium Lugs Thimble Suitable For 50 Sqmm , Aluminium Lugs Thimble Suitable For 70 Sqmm , Cable Flexible Copper Conductor 56 Or Point 30 Three Core , Cable Pvc Copper Conductor 4 Sqmm 3 Core , Cable Pvc Insulated And Pvc Un Sheathed Alum Conductor 10 Sqmm Twin Core , Cable Pvc Insulated And Pvc Un Sheathed Alum Conductor 2 Point 5 Sqmm Twin Core , Cable Pvc Insulated Sheathed Alum Conductor 1100 Volts 10 Sqmm Twin Core , Capacitor 2 Point 5 Mfd , Capacitor 3 Point 15Mfd , Capacitor 4 Mfd , Ceiling Rose , Fan Electronic Regulator Step Or Capacitor Type 100 Watt Two Module , Foot Valves 200Mm , Gate Valve Gm 50Mm , Led 10 Watt Bulb , Led 7 Watt Bulb , Led Inverter Street Light 60 Watt , Mcb Distribution Board For 6 Way Metal Clad , Pvc Insulation Tape F Or R 25Mmx25Rm Long , Pvc Tape For R 15Mmx25Rm Long , Pvc Tape For R 25Mmx25Rm Long , Timer Switch For Street Light Control 3 Phase 08 Kw , Led Tube Batten Fitting Complete Set 1X40 Watt , Xlpe Cable For Working Voltage Up To And Including 1.1 Kv Marked To Is 7098 (Part 1) (Q2) , Led Luminaire For Floodlight Conforming To Is 10322 (Part 5/Section 5) (V3) (Under Bis Scheme - Ii) (Q2) , Led Luminaire For Road And Street Lights Conforming To Is 10322 (Part 5/Section 3) (V3) (Under Bis Scheme - Ii) (Q2) , Moulded Case Circuit Breakers (Mccb) Conforming To Is/Iec 60947 (Part 2) (Q3) , Led Batten Light (Led Tube Light) (V2) (Q2) , Led Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To Is 10322 (Part 5/Section 2) (V4) (Under Bis Scheme - Ii) (Q2) , Led Garden Light (V2) (Q2) Total Quantity : 4461
Contract Date: Ref. Documents Contract Value : 45.53 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Himachal Pradesh View Result →
48.
Public Administrative Department #11162234 AOC
Providing Fixing Various Equipments And Appliances, Cctv, Water Purifier Etc And Electrification Work In Zakir Hussain Hospital, Nmc-1 P / F Isi Mark Midget Type 3.0 Ltr Instant Type Water Heater Of Abs Plastic Body Kw, Heating Element 230 / 250 Volts 50 Cycle Ac Supply With Inlet And Outlet, Thermostatic Control And Thermal Cutoff With 3 Core Pvc Flexible Wire Leads Complete 2 P / F, Testing And Commissioning Of 1400 Va To 1600 Va Digital Pure Sine Wave Inverter Based On Insulated Gate Bipolar Transistor ( Igbt ) Technology Single Phase 230V, 50 Hz Complete As Per Specification No. Apinv ( Without Batteries ) 3 P / F Testing And Commissioning Of 2500 Va Digital Pure Sine Wave Inverter Based On Insulated Gate Bipolar Transistor ( Igbt ) Technology Single Phase 230V, 50 Hz Complete 4 P / F 12 V / 150Ah Battery With Battery Terminal Wire, Duly Charged Complete 5 P / F 12 V / 180Ah Battery With Battery Terminal Wire, Duly Charged Complete 6 P / F, Testing And Commissioning Split Type Variable Speed Inverter Technology Room Airconditioning Unit 1 Tr Having Iseer Minimum 4.50 Suitable To Operate On Capacity 250V, 50 Cycles, A.C. Supply Having 1 No. Of Air Handling Unit Hi-Wall Floor Mounting Type Complete With Refrigerant R410a / R32 And Copper Condenser At Position. 7 P / F Testing And Commissioning Split Type Variable Speed Inverter Technology Room Air Conditioning Unit 1.5 Tr Capacity Suitable To Operate On 250V, 50 Cycles, A.C.Supply Having 1 No Of Air Handling Unit Hiwall / Floor Mounting Type Complete. 8 P / F Testing And Commissioning Split Type Variable Speed Inverter Technology Room Air Conditioning Unit 2 Tr Capacity Suitable To Operate On 250V, 50 Cycles, A.C. Supply Having 1 No. Of Air Handling Unit Hi-Wall / Floor Mounting Type Complete 9 P / F Testing And Commissioning Of Etc Solar Water Heating System Without Heat Exchanger Type Of 500 Lpd Capacity Complete. 10 P / F Ultra Violet Storage Type Water Purifier ( Ro+Uv+Uf ) With Softener For Safe Drinking Water Consisting Of Uv Germicidal Tube Of 8W Capacity Choke Made Of Copper Wire And Two Indicator Lamps . 11 P / F 2 Mega Pixels Ip Dome Progressive Scan Image Sensor Camera With Awb / Agc / Blc Onvip 2.4 With Ip 66 Weather Proof Housing Supports Poe. 12 P / F 4 Channel Networking Video Recorder H. 264 .1080P, With One Vga & Hdmi Out, Resolution Ntc 1080P Pal 1080P Real Time Recording Sata Support Capacity 2Tb, 2Usb Port, Protocol- Tcp / Ip, Dhcp, Ddns, Upnp, Ntp & Smtp 13 P / F 8 Channel Networking Video Recorder H. 264 .1080P, With One Vga & Hdmi Out, Resolution Ntc 1080P Pal 1080P Real Time Recording Sata Support Capacity 4Tb, 2Usb Port, Protocol- Tcp / Ip, Dhcp, Ddns, Upnp, Ntp & Smtp 14 P / F 16 Channel Networking Video Recorder H. 264 .1080P, With One Vga & Hdmi Out, Resolution Ntc 1080P Pal 1080P Real Time Recording Sata Support Capacity 4Tb, 2Usb Port, Protocoltcp / Ip, Dhcp, Ddns, Upnp, Ntp & Smtp. 15 P / F Hard Disc Drive Of 4 Tb Capacity For Network Video Recorder 16 P / F 1Kva On Line Ups Pure Sine Wave With Standard Features, Along With Necessary Smf Batteries For 30 Mins. Battery Backup 17 P / F 2Kva On Line Ups Pure Sine Wave With Standard Features, Along With Necessary Smf Batteries For 30 Mins. Battery Backup 18 P / F 3Kva On Line Ups Pure Sine Wave With Standard Features, Along With Necessary Smf Batteries For 30 Mins. Battery Backup 19 P / F Testing And Commissioning 32 Hd Led Tv With 1366X768 Hd Ready- Great Picture Quality, 60 Hz : Standard Refresh Rate For Blur Free Picture Quality, Etc Complete 20 P / Laying Cat-6 Cable With Rodent Proof Suitable For Lan / Wan 21 P / F Testing Utp Connector ( Rj-45 ) 22 P / F And Configuring Broadband Router With All Accessories, On Provided Rack . 23 P / F And Configuring 8-Ports Managed Gigabit Switches Poe Smart Switch 24 P / F 6U Wall Mount Rack ( Dimension- Dxwxh – 450X550x367 Mm ) 25 P / Laying Hdmi Cable Low Voltage Grade As Per Specification As Per Specifications Having 5 Mtr Cord Length With Male / Female 19Pin Hdmi Connectors As Per Requirements Complete. . 26 P / F Testing And Commissioning Tata Sky Connection With 3 Month Recharge ( Tata Sky Connection 2100 / - + 3 Month Recharge ( Basic Marthi & Hindi Package ) 1050 / - 27 Recharge Of Set Top Box Connection ( Basic Marathi & Hindi Package ) 28 Recharge Of Broadband Connection 29 Making Plumbing Works On Terrace For 500 Lpd Solar Water Heating System Complete 30 Providing, Erecting Hand Dryer ( As Per Product Price Abs Hand Dryer ) 31 P / F Pvc Trunking ( Pvc Casing-N-Capping ) Of Size 25 Mm With Accessories On Wall / Ceiling . 32 Point Wiring In Pvc Trunking ( Casingcapping ) With ( 2+1E ) Copper Wire, Modular Type Switch, Earthing And Required Accessories 33 Point Wiring For Independent Plug In Pvc Trunking ( Casingcapping ) With ( 2+1E ) Frlsh Grade Copper Wire, Modular Type Switch, Earthing And Required Accessories . 34 P / F T8 Led 20W Tube Light Fitting ( 4 Feet ) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete . 35 P / F Centrifugal Mixer Domestic Type, Ss Container, Motor Suitable For 230 / 250 Volts Single Phase, 50 Cycles A.C. Supply Complete 36 P / F 3W, 230V Integral Type Led Lamp Suitable For B-22 / E-27 Base . 37 P / F 5W-7W, 230V Integral Type Led Lamp Suitable For B-22 / E-27 Base . 38 P / F Regular / Standard Model Ceiling Fan Complete Erected In Position 39 P / F Fan Clamp Of 30 X 5 Mm. M.S. Flat Of Required Length And 10 Mm. M.S. Bolt And Nuts Erected With Necessary Hook Of 10 Mm. M.S. Round Bar And Painted. 40 P / F ‘B’ Grade G.I. Pipe / M.S. Pipe Down Rod Duly Painted For Fan Complete Erected With Pvc Three Core Flexible Cable 1 Sq. Mm Copper Pvc Wire. 41 P / F Isi Mark Modular Type Electronic Step Regulator For Fan 42 Providing Aaa Batteries For Various Equipments As Required. 43 P / F Good Knight Machine For Mosquito Repellant Liquid. 44 P / F Refill For Good Knight Machine. 45 P / F Floor Cleaning Vaccum Cleaner Suitable For Operating On 240V / 50Hz Power Supply Complete. 46 P / F 3Kw Electrical Heater Coil With Anode, Thermostat, Auto Panel With Timer Etc Complete Suitable For 500 Ltr Solar Water Heating System Complete. 47 P / F Bracket Fan 400 Mm. Sweep A. C. 230 Volts 50 Cycles 1350 R.P.M. Oscillating Type, Plastic Or Metal Blades Chrome Plated Guard With Regulator And Moisture Proof Treatment To Winding And With ‘E’ Class Insulation 48 P / F 400Mm Pedestal Fan 230 Volts 50 Cycles Oscillating Type Complete With Guard Complete 49 Providing And Fixing 2 X 1.5Sq.Mm Mains With Copper Pvc Stranded / Solid Wire Complete 50 P / F 2 X 2.5Sq.Mm Mains With Copper Pvc Stranded / Solid Wire Complete 51 P / F 2 X 4Sq.Mm Mains With Copper Pvc Stranded / Solid Wire Complete 52 Providing And Fixing 2 X 6Sq.Mm Mains With Copper Pvc Stranded / Solid Wire Complete 53 P / F Isi Mark Modular Type Switch 6A 10A Duly Erected On Provided Plate And Box With Wiring Connections Complete 54 P / F Isi Mark Modular Type 3 Pin 6A Multi Sockets With Safety Shutter, Duly Erected On Provided Plate And Box With Wiring Connections Complete 55 P / F Isi Mark Modular Type 3 Pin 6 / 16A Multi Socket With Safety Shutter, Duly Erected On Provided Plate And Box With Wiring Connections Complete 56 P / F Isi Mark Modular Type Switch 16 / 20 A With Indicator, Duly Erected On Provided Plate And Box With Wiring Connections Complete 57 P / F Pvc Surface Modular Switch Box With Double Mounting Plate For 3 Modules Duly Erected 58 P / F Pvc Surface Modular Switch Box With Double Mounting Plate For 6 Modules Duly Erected 59 P / F Pvc Surface Modular Switch Box With Double Mounting & Front Plate For Modules Complete Duly Connected 60 P / F Pvc Surface Modular Switch Box With Double Mounting Plate For 12 Modules Duly Erected 61 P / F Double Pole Switch Surface Type / Flush Type 240V, 32A With Indicator Lamp & Fuse 62 Providing Fixing Marking Spmcb 6A To 32A, B- Series In Provided Distribution Board 63 Providing Fixing Marking Spmcb 40A To 63A C- Series In Provided Distribution Board 64 Providing Fixing Marking Dpmcb 6A To 32A, C- Series In Provided Distribution Board 65 Providing Fixing Marking Dpmcb 40A To 63A, C- Series In Provided Distribution Board 66 Providing Fixing Marking Tpmcb 6 A To 32A In Provided Distribution Board 67 Providing Fixing Marking Tpmcb 40A To 63A In Provided Distribution Board 68 Providing Fixing Marking Fpmcb 6 A To 32A In Provided Distribution Board 69 Providing Fixing Marking Fpmcb 40A To 63A In Provided Distribution Board 70 P / F Meter Box For Three Phase Energy Meter With Compartment For Mccb / Mcb Etc Complete. 71 Making Trench In Soft Soil For Laying Provided Cable . 72 P / F Single Door Refrigerator Domestic Type Of 270 Litres Storage Capacity, Suitable For Operation On 230 / 250 V, 50 Cycles Complete With Automatic Temperature Control Sealed Unit In Refrigeration System Complete. 73 P / F Two Option Coffee / Tea Vending Machine Operating On 50 Hz, 230 V Single Phase A.C. Supply. 74 P / F Three Option Vending Machine For Coffee / Tea Operating On 50 Hz, 230 V Single Phase A.C. Supply. 75 Providing Premix Of Tea / Coffee For Vending Machine Refillng. 76 P / F Single Door Refrigerator Domestic Type Of 215 Litres Storage Capacity, Suitable For Operation On 230 / 250 V, 50 Cycles Complete With Automatic Temperature Control Sealed Unit In Refrigeration System Complete. 77 Providing Evaporative Air Cooler 230 / 250 Volts, 50 Cycles, Normal Cooling Capacity Of 50 Cu.M Per Minute, With 12 Exhaust, Minimum 40 To 55 Litre Water Capacity Tank Complete. . 78 Providing Evaporative Air Cooler 230 / 250 Volts, 50 Cycles, Normal Cooling Capacity Of 60 To 70 Cu.M Per Minute With 15 Exhaust Fan, Minimum 68 Litre Water Capacity Tank Complete. . 79 Providing Evaporative 230 / 250 Volts, 50 Cycles, Normal Cooling Capacity Of 80 Cu.M Per Minute With 18 Exhaust Fan, Minimum 75 To 80 Litre Water Capacity Tank Complete. 80 Providing Basic Feature Mobile Set For Coordination Of Security And Building Coordinators / Ward Boys. 81 Making Plumbing Works For Fixing Instant Water Heater / Gryser / Water Purifier Using Various Aacessories Like Pipes, Valves, Tapes Etc Complete. 82 Making Plumbing Works For Fixing Storage Water Heater / Gryser Using Various Aacessories Like Pipes, Valves, Tapes Etc Complete. 83 P / Pasting Superior Quality Sun Control Film On Glass To Achieve Better Cooling Effect 84 P / Laying Telephone Black / Amba White Cadburybrown / Ruby Red / Ocean Brown Granite Stone Of 18 To 20 Mm Thick For Door Frame / Dado / Window Boxing Etc. On C.M. 1:6 Including Filling Joints With Polymer Base Filler Nosing / Moulding 85 Providing, Constructing Plinth For Substation Compound Required Excavation, Pcc In 1:2:4, 0.5Mtr Wide, 0.5Mtr Below And 0.5Mtr Above Ground In Cement Morter 1:6, Etc Complete As Per Rate Analysis. 86 P / F Fencing Of Section Having Size 2450 Mm In Height From Ground Level And 1200 Mm Width With Angle Iron Frame Work Complete 87 P / F Double Leaf Hinged Door Each 1500 Mm In Width X 1850 Mm In Height Using B Class, Gi Pipe With Angle Iron Supports, Chain Link Wire Meshcomplete 88 P / F 50 X 50 X 6Mm Angle Iron Corner Support 0.5M Away From Fence Support Fixed Etc. 89 P / F Gi Sheet 0.6 Mm ( 24 Swg ) To Be Used For Fabrication Of Boxes Panel Boards Etc. Including Cutting, Bending, Drilling, Welding, Riveting Etc. Complete . 90 P / F Marine Plywood 18 / 19 Mm Thick Fixed To Wall Or On Provided Panel Board With Necessary Materials Such As Screws, Wall Fasteners, Supports, Nut Bolts Etc. Complete. 91 Making Fabrication Work Using 16 Gauge Metal Sheet With Bending, Cutting, Drilling And Welding Complete . 92 Powder Coating In Siemens Gray Colour . 93 Making Iron Work For Fabrication With Bending, Cutting, Drilling And Welding Complete . 94 Providing And Applying Epoxy Paint With Anticorrosive Coating Etc Complete 95 Making Fabrication Work Using 16 Gauge Metal Sheet With Bending, Cutting, Drilling And Welding Complete . 96 Providing , Fixing And Erecting 6Mm Polycarbonate Multiwall Ultravoilet Protected Sheet For Roofing Over Fabricated Steel Structure As Per Detail Design, Including Fixing The Polycarbonate Sheet With Alluminium Angle & Flat Anodized & Dyed As Per Approved Shade Including All Water Proofing Materials, Nuts Bolts Hardware, Labour & Square Pipe, Angles, Fabrication Complete Including All Hardware Etc. As Required . ( Only Actual Area Of Polycarborted Sheet To Be Considered For Measurements ) 97 P / F Bracket For Set Top Box 98 Providing Stainless Steel Electric Kettle 99 P / F Co-Axial Copper Cable Low Voltage Grade Rg-11 100 P / F And Modifying Rfid / Coin System For Vending Machine Complete. 101 Providing Rfid Card / Coin For Vending Machine Complete. 102 Providing Hot Water / Tea / Coffee Storage Can Of 6 Litre Capacity. 103 P / F Water Cooler With Uv Water Purification System Complete Of 120 Lit Capacity Pss Storage Suitable Operating Input Voltage 240 V 50 Hz Power Supply Complete. 104 P / F Water Dispenser In Hot & Cold With Uv Water Purifier Suitable Operating Input Voltage 230V / 50Hz Power Supply Complete. 105 P / F Water Cooler With Ro + Uv Water Purification System Complete Of 120 Lit Capacity Pss Storage Suitable Operating Input Voltage 240 V 50 Hz Power Supply Complete. 106 P / F Water Dispenser In Hot & Cold With Ro + Uv Water Purifier Suitable Operating Input Voltage 230V / 50Hz Power Supply Complete. 107 P / F Insect Killer Suitable Operating Input Voltage 230V / 50Hz Power Supply Complete. 108 P / F Single Door Horizontal Chest Deep Freezer Of 200 Litres Capacity, Direct Cool Technology Suitable For Operation On 230 / 250 V, 50 Cycles Complete With Automatic Temperature Control Sealed Unit In Refrigeration System Complete. 109 Carrying Out Core Cutting Of Size 3 To 5 Dia X 1 Length In The C.C. / Rock / Stone Wall With The Help Of Pecialized Core Cutting Machine In Proper Manner And Finishing The Site As Original. 110 P / F H.D.P Container Syntex Or Alike One Piece Moulded Water Tank Made Out Of High Density Polythyler And Built Corrugated Complete. 111 P / F Iam 15V Oil Free Medium Pressure Air Compressor Reciprocating Vertical Type Water Cooled Non Lubricated With Suction Air Filter With Silencer Watercooled After Cooler With Moisture Separator V-Belt Drive Arrangement Complete. 112 P / F Cooling Tower 10 Tr 113 Making Foundation, Water And Air Pipe Line With Complete Power And Control Cabling Loading, Unloading Trasportation, 114 P / F Automatic Control Panel For Emergency Alarm System Complete. 115 P / F Copper Pipe Suitable For Refrigeration System Having Size 12 Mm Complete. 116 P / F Copper Pipe Suitable For Refrigeration System Having Size 16 Mm Complete. 117 P / F Elastomeric Nitrile Rubber / Foam Tube Type Sleeves For Over Coating And Insulating On Provided Copper Pipes Having Sizes 12 Mm 118 P / F Elastomeric Nitrile Rubber / Foam Tube Type Sleeves For Over Coating And Insulating On Provided Copper Pipes Having Sizes 16 Mm 119 P / F Rigid Pvc Pipe 20 Mm Dia.With Pvc Accessories For Drain 120 P / F Mains With Isi Mark Wp 2 X 6 Sq. Mm. 1100 V. Grade Aluminium Pvc Insulated And Pvc Sheathed Wires On G.I. Bearer Wire No. 8 Swg Complete 121 P / F Fully Automatic Line Voltage Stabilizer For Operation On Input Voltage 160 To 270V And Output Voltage 200 To 250V Rated For, Kva Maximum Load And With Voltmeter, Selector Switch, 6A / 16A Flush Type 3 Pin Socket For Output 122 P / F Fully Automatic Line Voltage Stabilizer For Operation On Input Voltage 160 To 270V And Output Voltage 200 To 250V Rated For, Kva Maximum Load And With Voltmeter, Selector Switch, 6A / 16A Flush Type 3 Pin Socket For Output 123 P / F Fully Automatic Line Voltage Stabilizer For Operation On Input Voltage 160 To 270V And Output Voltage 200 To 250V Rated For, 5 Kva Maximum Load And With Voltmeter, Selector Switch, 6A / 16A Flush Type 3 Pin Socket For Output 124 P / F Fully Automatic Line Voltage Stabilizer For Operation On Input Voltage 160 To 270V And Output Voltage 200 To 250V Rated For, 7.5 Kva Maximum Load And With Voltmeter, Selector Switch, 6A / 16A Flush Type 3 Pin Socket For Output 125 P / F Fully Automatic Line Voltage Stabilizer For Operation On Input Voltage 160 To 270V And Output Voltage 200 To 250V Rated For, 10 Kva Maximum Load And With Voltmeter, Selector Switch, 6A / 16A Flush Type 3 Pin Socket For Output 126 P / F Testing & Commissioning Approved Type Digital Key Telephone / Ip Telephone Instrument 127 P / F Testing & Commissioning Internet Protocol Digital Type Epabx For 10 Ip Extensions Complete. 128 P / F 8 Extension Card For Epabx System 129 P / F 16 Extension Card For Epabx System 130 P / F Testing & Commissioning Push Button Telephone Instrument Desk Top / Wall Mount With Caller Id Unit, Etc Complete . 131 P / F Commissioning Main Distribution Frame ( Mdf ) Box 50X50 Pairs 132 P / Laying Telephone Copper Cable 4 Pair With 0.5 Mm Dia. Laid In Provided Pvc Casing Capping / Conduit . 133 P / Laying Unarmoured Telephone Copper Cable 10 Pair With 0.5 Mm Dia. Laid In Provided Pvc Casing Capping / Conduit 134 P / Laying Lszh Armoured Multimode Optical Fibre Cable With 6 Fibres, With Core Dia 50 / 125 Lm Suitable For 1 Gbps Ethernet Distance At 850 Nm Of Wavelength, On Wall / Ceiling Or Laid In Provided Pipe / Trench 135 P / Laying Fr Grade, Pvc Armoured Multimode Armoured Multimode Optical Fibre Cable With 6 Fibres, With Core Dia 50 / 125 Lm Suitable For 1 Gbps Ethernet Distance At 850 Nm Of Wavelength, On Wall / Ceiling Or Laid In Provided Pipe / Trench 136 P / F Configuring 1-Port Mini-Gbic Sx Mutlimode Fibre Transceiver 137 Supplying, Erecting, Testing And Commissioning Amplifier 700 W For Public Address System Suitable To Operate On 230 Volts A.C. / 12 Volts D.C. Supply Complete. 138 P / F Testing And Commissioning Sound Column 30 Watts Complete. 139 P / F Testing And Commissioning Microphone Complete 140 P / F Testing And Commissioning Stand For Microphone Complete. 141 P / F Testing And Commissioning Of 2 Core Shielded Microphone Cable Complete 142 P / F Testing And Commissioning Of 1.5 Sq Mm Speaker Wire Complete. 143 P / F Digital Ammeter For Measuring Current 144 P / F Digital Voltmeter For Measuring Voltage 145 P / F Multifunction Meter 146 P / F Selector Switches For Voltmeter & Ammeter . 147 P / F Light Emitting Diode Type Indicator 148 P / F Moulded Case Circuit Breaker . A Up To 100A. B 200A. C 250 D 315 / 400A. E 600 / 630A. F 800A. 149 P / F Sp Moulded Case Circuit Breaker. A Up To 100A. B 200A. 150 P / F Busbar Chamber With Triple Pole Neutral Aluminium Bus Bar A 100A. B 200A. C 300A. D 400A. E 630A. F 800A. 151 Providing And Laying Aluminium Conductor 3.5 Core Xlpe / Pvc Armoured 1.1Kv Grade Cable A 25Sq.Mm B 35Sq.Mm C 50Sq.Mm D 70Sq.Mm E 95Sq.Mm F 120Sq.Mm G 150Sq.Mm H 185Sq.Mm I 240Sq.Mm J 300Sq.Mm K 400Sq.Mm 152 Providing And Laying Aluminium Conductor 4 Core Xlpe / Pvc Armoured 1.1Kv Grade Cable A 4Sq.Mm B 6Sq.Mm C 10Sq.Mm D 16Sq.Mm 153 Providing And Laying Aluminium Conductor 2 Core Xlpe / Pvc Armoured 1.1Kv Grade Cable A 4Sq.Mm B 6Sq.Mm C 10Sq.Mm 154 Providing And Laying Copper Conductor Core 2.5Sq.Mm Xlpe / Pvc 1.1Kv Grade Flexible Cable 155 Providing And Laying Copper Conductor Core 4Sq.Mm Xlpe / Pvc 1.1Kv Grade Flexible Cable 156 Providing And Laying Double Wall Corrugated Pipes ( Dwc ) Of Hdpe For Enclosing Cable Below Ground / Road Surface, To Required Depth Complete A 50 Mm B 75 Mm C 90 Mm D 120 Mm E 146 Mm F 160 Mm G 175 Mm H 200 Mm 157 P / F Heat Shrinkable Straight Through Joint Kit For 3 Core Etc Complete . A 70-120Sq.Mm B 150-185Sq.Mm C 240-400Sq.Mm 158 P / F Gi Strip Of Suitable Size 159 P / F M.S. Stand For Fire Bucket 160 P / F Wall Hook For Fire Bucket . 161 P / F G.I Fire Bucket 9Lit 162 P / F Instruction Chart 163 Pair Of Rubber Hand Gloves 164 Providing Standard First Aid Box With Necessary Antiseptic Cream, Medicine For Use On Wounds Due Burn, Crepe Bandage, Gauge Bandage, Medicated Ready To Use Bandage ( Band-Aid ) Adhesive Tape For Medicinal Use, Scissors, Anti-Septic Solution, Etc 165 P / F Fire Extenguisher Complete Erected With Necessary Clamp 166 P / F High Voltage Insulating Electromat Confirming To Is 15652 :2006 A Suitable For 3.3Kv. B Suitable For 11Kv. C Suitable For 33Kv. 167 Danger & Other Sign Board 168 Electrical Inspection, Compliance, Test Reports Of Earthing, Insulation Test Etc Complete. 169 P / F Analog Ammeter For Measuring Current 170 P / F Analog Voltmeter For Measuring Voltage 171 P / F Change Over Switches. A 63A. B 125A. C 200A. D 250A. E 315A. F 400A. G 630A. H 800A. I 1000A. 172 P / F C I Pipe Type Earthing Etc Complete. 173 Lt Panel, Changeover Panel, Distrubution Panel, Feeder Panel A Power Wiring Up To 63A Feeder Using Copper Wire, Lugs, Tie Saddle, Spiral Etc Complete. B Control Wiring For Metering Using Copper Wire, Ferrule, Lugs, Tie Saddle, Spiral Etc Complete. C Panel Accessories Such As Hardware, Gasket, Insulator, Backlite, Panel Knob, Panel Lock, Push Button With Indicators, Heavy Duty Connectors Earthing Arrangement, Etc Complete For Following Feeders I Up To 100A Ii 100A To 250A Iii 250A To 400A Iv 400A To 800A D Dismantling, Disconnecting Connections Of All Cables, Shifting Old Panel In Godown Etc Complete Of Following Capacity. I Up To 100A Ii 100A To 250A Iii 250A To 400A Iv 400A To 800A E Installation Of Panel At Desired Place Including Loading Unloading And Transportation Of Following Capacity I Up To 100A Ii 100A To 250A Iii 250A To 400A Iv 400A To 800A F Making New Terminations Of Main Incoming / Outgoing Cables, Etc Complete For Following Feeders. I Up To 100A Ii 100A To 250A Iii 250A To 400A Iv 400A To 800A G Interlocking, Forward / Reverse, Timing And Control Circuit / Star Delta Circuit Etc Control Wiring Using Copper Wire, Ferrule, Lugs, Tie Saddle, Spiral, Etc Complete For One Feeder. 174 Supplying Pedestal Fan 230 Volts 50 Cycles Oscillating Type Complete With Guard Complete A 400 Mm B 450 Mm C 600 Mm 175 Dismantalling Temporary Hangging Wires Accessories, Etc Complete. 176 P / F 3 Phase Heavy Duty Industrial Socket. 177 P / F 1 Phase Heavy Duty Industrial Socket. 178 Tracing Out Faults And Attending Various Breakdown A Tracing Out Fault And Attending Minor Breakdown In Wiring / Electrification Etc Complete B Tracing Out Fault And Attending Major Breakdown In Wiring / Electrification Etc Complete C Tracing Out Fault In Lt Cable / Cable Kit / Panel Removing The Connection Of Cable, Taking Insulation Test. After Fixing New Cable / Cable Kit, Making Termination Of The Cable Again Taking Insulation Test And Giving Satisfactory Test And Trials, Etc Complete. D Tracing Out Fault In Ht Cable / Cable Kit / Cubical, Removing The Connection Of Cable, Taking Insulation Test. After Fixing New Cable / Cable Kit, Making Termination Of The Cable Again Taking Insulation Test And Giving Satisfactory Test And Trials, Etc Complete. E Attendance, Checking And Assistance For Total Electrical System During General Body Meeting. 179 Providing And Spreading Stone Metal 25Mm Size For 100Mm Depth Above The Ground Level. 180 Hiring Charges For Supplying And Maintaining 230V, 50 Cycles Ac Generating Set With Its Accessories And Without Fuel, With Operator For All Shifts Complete With Continuous Running On Load / No Load As Per Requirements Complete With Self Certification A 25 To 30 Kva Capacity B 40 To 62.5 Kva Capacity C 125 Kva Capacity D 200 To 250 Kva Capacity E 400 Kva Capacity 181 Hiring Charges For Supplying And Maintaining 230V, 50 Cycles Ac Generating Set With Its Accessories And Without Fuel, Without Manpower Complete With Continuous Running On Load / No Load As Per Requirements Complete With Self Certification A 25 To 30 Kva Capacity B 40 To 62.5 Kva Capacity C 125 Kva Capacity D 200 To 250 Kva Capacity E 400 Kva Capacity 182 P / F L.T. Current Transformer Of Suitable Ratio 183 Supplying And Erecting Mini Feeder Pillar Triple Pole With 200A Mccb As Incomer And 2 Outgoing Circuits With Hrc Fuse Base And Cartridge Of 100A Consists Of Aluminium Bus Bar 500 V 200 A Complete Erected In 14 Gauge Crca Sheet Box With Supporting Angles, Self-Locks, Gasket And Slanting Top To Be Erected On Provided Foundation 184 Supplying And Erecting Mini Feeder Pillar Triple Pole With 300A Mccb As Incomer And 3 Outgoing Circuits With Hrc Fuse Base And Cartridge Of 100A Consists Of Aluminium Bus Bar 500V 300A Complete Erected In 14 Gauge Crca Sheet Box With Supporting Angles, Self-Locks, Gasket And Slanting Top To Be Erected On Provided Foundation 185 P / F Flood Light Led Fitting A 30-40W B 50W C 70 To 80W D 90 To 100W E 120W F 150W G 200W 186 P / F Street Light Led Fitting A 70 To 75W B 75 To 90 W C 100 W 187 Supplying And Erecting Street Light Wall Bracket Made From 40Mm. Dia ‘B’ Class G.I. Pipe Complete . 188 Supplying, Erecting, Testing And Commissioning Self Contained Water Cooler 230 / 250V 50 Cycles Nominal Cooling Capacity Of 40 Litres / Hr And Storage Capacity 80 Litres With Partially Stainless Steel Body Complete.. 189 Providing Multimeter Of Range 0-10-30- 100-1000 Amps And 0-300-600 Volts, Continuity Tester, Ac, Dc Voltage Tester. . 190 Providing Insulator Tester ( Megger ) Cranking Type Having Metal Body Of Range 100 Volts 1000 Ohms . 191 Providing Tong Tester ( Clip On Meter ) Of Range 0-10-30-100-1000 Amps And 0-300- 600 Volts . 192 Providing Non Contact Voltage Detector Of Range 0-600 Volts . 193 Screw Driver With Green Neon Bulb Line Tester 3.6 X 60 Mm . 194 Providing And Fixing Triple Pole And Neutral Surface / Flush Mounted Distribution Board ( Tpndb ) A Distribution Board 12 Way ( 5-4-4 ) B Distribution Board 24 Way ( 5-4-5 ) C Distribution Board 36 Way ( 5-4-6 ) D Distribution Board With Door 12 Way ( 5-4- 10 ) E Distribution Board With Door 24 Way ( 5-4- 11 ) F Distribution Board With Door 36 Way ( 5-4- 12 ) G Distribution Board ( Spndb ) One Way ( 5-4- 13 ) H Distribution Board 4 Way ( 5-4-14 ) I Distribution Board 8 Way ( 5-4-15 ) J Distribution Board With Door 4 Way ( 5-4- 17 ) K Distribution Board With Door 8 Way ( 5-4- 18 ) 195 Reconditioning, Shifting And Installation Of Transformer. A Inspection Of Distribution Transformer On Hv And Lv Side B Dismantling The Distribution Transformer Of From The Plinth / Foundation C Providing And Filling Transformer Oil D Painting Of Transformer Using Smoke Gray Paint Complete . E Providing And Rewinding Of Copper Material For Ht Coils F Heating Of Core And Winding, Including Removing Of Moisture Etc Complete G Providing Oil Arresting Sheet For Low Tension Side Of R Y B Studs, 5Mm Thick Properly Fitted In The Studs Of Transformer. H Providing Oil Arresting Sheet For Top Cover Of Oil Chamber, Lt Connection Box, Oil Tank Etc Parts , 5Mm Thick Properly Fitted In The Top Cover And Nut Bolts Of Transformer I Providing R Y B Stud Bushings Over The Oil Arresting Sheet On The Studs Of Transformer . J Reinsulation By High Quality Uniform Covering Throughout Of 11Kv Windings Using Accessories Complete K Reinsulation By High Quality Uniform Covering Throughout Of 415V Windings Using Accessories Complete L Repairing And Servicing Of Tap Changer Of Transformer M Transformer Oil Filtration N Changing Silica Jel Of Breather And Adding Breather Oil. O Loading, Unloading And Transportation Of Transformer. P Attendance, Engineering Charges For Connection Of Ht / Lt Cables And Giving Satisfactory Test & Trials Of Transformer Complete 196 Providing, Constructing 1.5 Mtr X 1.5 Mtr X 1.5 Mtr + 1 Mtr Underground Transformer Plinth As Per Rate Analysis. 197 Providing, Constructing 1.2 Mtr X 1.2 Mtr X 1.5 Mtr + 1 Mtr Underground Transformer Plinth As Per Rate Analysis. 198 Providing And Fixing Rolled Steel Joist ( Girder ) Pole 116X 100 Mm. ( 23 Kg / Meter ) 11Rmt With Provided Base Plate In Provided Foundation As Per Specifications . 199 Making Isolation Circuit Using Ab Switch D.O. Set For Single Pole & Converting The Cutpoint By Dismantling With Nessasary Material, Jumping, Earthing Along With Arrangement Of Shutdown Etc. Complete. 200 Providing C.C. Foundation Including Excavation For The Poles 60 X 60 X 1.5 Mtr Deep In 1:3:6 C.C. ( 45 X 45 X 45 ) Cm Height Plinth Duly Plastered And With Necessary Curing And Finishing In An Appr. Manner . 201 Providing And Fixing G.I. Stay Set For Poles, Including Loop Insulators At Inaccessible Height Complete 202 Providing And Fixing Ht Stay Wire 203 Providing And Fixing Approved Make, 11 Kv Lightening Arrestor With Necessory Accessories Etc Complete 204 Providing And Fixing Tension Porcelain Disc Type Insulator Suitable For 11 Kv Line Complete Erected With Suitable Hardware On Provided Cross Arms As Per Is. 205 Providing And Fixing Procelain Pin Type Insulator Suitable For 11 Kv Line, Complete Erected With Suitable Hardware On Provided Cross Arms. 206 Providing And Fixing A.C.S.R. Conductor Of Size - 6 / 1-4.09 Mm ( Raccon ) Complete Erected For Overhead Line With Striging Binding With Proper Size Of Alluminium Conductor For Binding And Suitable Size Of P.G. Clamps For Jumpering Etc. Complete 318 Kg / Km 207 Providing And Fixing A.C.S.R. Conductor Of Size - 6 / 1-4.72 Mm ( Dog ) Complete Erected For Overhead Line With Striging Binding With Proper Size Of Alluminium Conductor For Binding And Suitable Size Of P.G. Clamps For Jumpering Etc. Complete 394 Kg / Km 208 Providing And Fixing Air Break Switch Without Earth Switch 11Kv Outdoor Type Gang Operated Air Break, Triple Pole, 400A Switch Complete 209 Providing And Fixing Approved Make, 11 Kv Out Door Type Drop Out Fuse With Insulator Complete With Fuse Holders, Fuse Barrel With Metal Fitting, Fuse Element Mounted On M.S. Chanel With Working Curent Of 50 Amps Capacity Complete Erected On Provided Cross Arm. 210 Providing And Fixing Extra Thick Alkathene Pipe 10Mm Dia Erected To Enclose Bare Conductor Wires 211 Providing And Fixing Sundries Such As Earthing Powder, Danger Board Etc Accessories. 212 Providing M15 Grade Pcc Works For Plinth As Per Rate Analysis. 213 Designing, Providing, Fabricating, Installing Testing, Commissioning And Giving Satisfactory Tests Of Cubical Industrial Outdoor Type 2000A Lt Acb Changeover Panel As Per Detail Specifications, Making New Terminations Of Main Incoming And Outgoing Cables By Using Lugs Glands Etc Complete. 214 Repairing, Servicing Of 100Kva Dg Set A Providing And Filling Engine Oil 15W40 B Providing And Fixing Lub Oil Filter C Providing And Fixing Fuel Filter D Providing And Fixing Air Cleaner Inner E Providing And Fixing Air Cleaner Outer F Providing And Fixing V-Belt Set G Providing And Filling Radiator Coolant H Providing And Filling Radiator Cleaner 1Ltr Can I Dismantling Of Cylinder Heads, Turbo Charger, Refitting New Gasket, Checking All Allignments And Operation, Reffiting Assembly Again, Giving Test And Trial Complete. J Providing And Fixing Hose Pipe Set K Providing And Fixing Hose Clip Set L Providing And Fixing Fuel Pipe Set M Providing And Fixing O-Ring Set N Diesel Tank Cleaning O Servicing And Callibration Of Fip P Callibration Of Injector And Pressure Testing Q Servicing Of Charging Alternator R Servicing Of Starter Motor S Servicing Cleaning And Warnishing Of Main Alternator T Servicing, Overhaulling, Testing Of Avr, Epu Card, Relay Card, Etc Control Systems U Servicing And Overhaulling Of Turbo ( Dcarbonisation ) V Tappet Setting W Cleaning, Servicing Of Radiator And Refilling Coolant. 215 Repairing, Servicing Of Synchronization Panel By Updating Logic Software, Servicing Of Electronic Controller, Control Relays Terminations, Power And Control Wiring. Also Tightening Of Connections And Cleaning Of Panel Complete. 216 Servicing And Overhauling Of Ht Substation. A Servicing And Overhauling Of 4 Pole Ht Substation By Servicing Air Break Switch By Polishing Contacts, Applying Jelly To Contacts, Alignment Of Ab Switch, Servicing And Overhauling Of D.O. Set By Polishing Hansa And Punja, Applying Jelly To All Hansa And Punja, Changing Fuse Link Tightening Of Connections, Changing Hardware, Changing Acsr Jumper Links By Properly Lugging And Binding Using Alkathene Pipe. Ht Taping Of Connections, Checking Of Insulators, Insulation Test Of Total Installation And Earth Test Of Earthing Pits. B Servicing And Overhauling Of 2 Pole Ht Substation By Servicing Air Break Switch By Polishing Contacts, Applying Jelly To Contacts, Alignment Of Ab Switch, Servicing And Overhauling Of D.O. Set By Polishing Hansa And Punja, Applying Jelly To All Hansa And Punja, Changing Fuse Link Tightening Of Connections, Changing Hardware, Changing Acsr Jumper Links By Properly Lugging And Binding Using Alkathene Pipe. Ht Taping Of Connections, Checking Of Insulators, Insulation Test Of Total Installation And Earth Test Of Earthing Pits. 217 Servicing And Overhauling Of Transformer. Servicing And Overhauling Of Transformer By Changing R Y B Stud Bushing Of Ht, Lt Side, Oil Sheet For Low Tension Side Of Y B Studs, Top Cover Of Oil Chamber. Servicing Of Tap Changer, Taping Connections, Testing Of Oil Samples And Taking Insulation Test Of Transformer. Carrying Out Short Circuit, Open Circuit Test And Resistance Test Of Transformer. Changing Silica Jel Of Breather. Transportation, Attendance, Making Connection Of Ht And Lt Side As Well Giving Satisfactory Test And Trials Transformer. 218 Servicing Of Oltc By Checking Operating Mechanism, Alignment, Applying Jelly Various Parts, Checking Of Control Panel Operations And Replacement Of Provided Indicators, Switches, Control Fuses, Hardware, Insulator, Gasket, Polishing Contacts, Power And Control Wiring Using Appropriate Wire, Lugs, Tie, Saddle, Ferrules, Termination Of Incoming Outgoing Cables Required. Cleaning Of Panel, Tightening All Connections Etc Complete. 219 Servicing And Overhauling Of Amf Panel. Servicing Of Contactor, Terminations, Power And Control Wiring Using Appropriate Wire, Lugs, Tie, Saddle, Ferrules, Bus Bars, Changing Hardware Insulator, Gasket, Indicators, Push Buttons And Material Procured From Material List Like Voltmeter, Ammeter, Selector Switches, Termination Incoming Outgoing Cables As Required. Also Tightening Of Connections And Cleaning Of Panel Complete. A Up To 200A B 200A To 400A 220 Servicing And Overhauling Of Distribution Panels. Servicing , Repairing Of Distribution Panels By Checking Terminations, Power And Control Wiring Using Appropriate Wire, Lugs, Tie, Saddle, Ferrules, Bus Bars, Changing Hardware Insulator, Gasket, Provided Indicators, Voltmeter, Ammeter, Selector Switches Termination Of Incoming Outgoing Cables As Required. Cleaning Of Panel, Tightening Of All Connections Of Feeders Following Capacity. A Up To 32A B 32A To 63A C 63A To 100A D 100A To 150A E 150A To 200A F 200A To 250A G 250A To 400A H 400A To 630A I 630A To 800A J 800A To 1000A K 1000A To 1250A L 1250A To 1600A
Contract Date: May 25, 2026 Contract Value : 23.96 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
49.
Educational and Research Institute #11161433 Price Bid
Procurement Of Equipment, Instruments, Machinery, Tools Etc. Related To Laboratories And Workshops Of Electronics And Telecommunication Engg., Engineering Physics, Engineering Mechanics Of Mirik Government Polytechnic, Mirik, Dist. Darjeeling, 734214 , Spherometer (Screw Pitch 0.05 Mm And Lc 0.005 Mm) , Concave Mirror (Focal Length 20 Cm) , Convex Mirror (Focal Length 20 Cm) , Concave Surface (Focal Length 20 Cm Diameter 50 Mm) , Hooks Law Apparatus (Consisting Of 30 Cm Long Mirror Scale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand) , Mercury (Distilled Liquid Mercury, Grade Std.-Biotech Grade) , Flywheel Apparatus (Thickness: 4.4 Cm Diameter :20 Cm) , Cantilever (Length 100 Cm, Hook At One End, C Clamp) , Light Weight Hanger (Metal Slotted Weight Mechanics Physics Experiment Equipment Set With Hook With Weight Of Each Mass Of The Order Of 50Gm Or 100 Gm) , Inverse Square Law Apparatus (Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Microammeter) , Stopwatch (Digital Stopwatch With Ms Count) , High Resistance Box (Resistance Box Plug With 1 To 10 K Ohm Resistance) , Winch Crab Single Purchase With Weight [Experiment Set Up Winch Crab Single Purchase- Fitted With Heavy Cast Iron Wall Brackets The Grooved Wheel Is Of 25 Cm Diameter And Gears Are Machine Cut.String, Weight Box With Pan. ] , Winch Crab Double Purchase Without Weight [Experiment Set Up Winch Crab Single Purchase- Fitted With Heavy Cast Iron Wall Brackets The Grooved Wheel Is Of 25 Cm Diameter And Gears Are Machine Cut. ] , Worm And Worm Wheel Single Without Weight [Experiment Set Up Consisting Of Machine Cut Worm Gear Of 25 Cm Diameter, Carrying A Metal Drum On 12 Cm Diameter, And Machine Cut Worm On Steel Spindle Carrying A 12 Cm, Complete With Effort Pulley, String With Pan.] , Worm And Worm Wheel Double Without Weight [Experiment Set Up Consisting Of Machine Cut Worm Gear Of 25 Cm Diameter, Carrying A Metal Drum On 12 Cm Diameter, And Machine Cut Worm On Steel Spindle Carrying A 12 Cm, Complete With Effort Pulley, String With Pan.] , Wheel & Axle Simple Without Weight [Standard Setup For Lab.] , Simple Screw Jack With Weight [Experiment Set Up Screw Jack ( Weights)All Metallic Construction Accurately Machine Cut Screw With A Pitch Of 5 Mm Carrying A Double Fanged Turn Table Of About 20 Cm Diameter. Fitted On A Heavy Cast Iron Base And Complete With Two Adjustable Pulleys, Cord And Hook. Weights Are Included.] , Combined Inclined Plane & Friction Slide Apparatus Iron Base & With Weight [Standard Setup For Lab.] , Parallel Forces Apparatus [Experiment Set Up Simple Supported Best Type Supported At Its End. For Verification Of Condition Of Equilibrium Of Parallel Forces, Law Of Lever & Forces On Beam Etc. Consisting Of Two Compression Thrust Type 10 Kg Tubular Spring Balances Fixed On Wooden Polished Board, A Wooden Beam With Steel Back Plate. Complete With Two Strups, Hooks & Two 10Kg Weights. ] , To Verify Lami’S Theorem [Gravesand Apparatusboard: Wooden With Metal Base Pulley: Z-Pullies (2 Nos) With Adjustable Distance Weight Set: 5X50 G (3 Sets). ] , Simple Jib Crane Apparatus Iron Stand With Weight [Experiment Set Upwith Consisting Of A Tubular Compression Balance, Pivoted About An Axis Fitted To The Base. The Tie Chain Has An Adjustable Angle Bracket And Fitted With A 10Kg Extension Balance. Completion Wooden Base With 1.2 Meter Jib. With Weights. ] , Mini Drafter, T Square, Protractor, Set Squares, Compass, Divider [Made Out Of Wood. To Be Used In Chalk Board] , Model Of Geometric Constriction (Solid Cube, Solid Primed, Cylinder, Cone, Hexagon, Tetrahedron ) [Made Out Of Wood. To Be Used In Chalk Board] , Amplitude Modulation And Demodulation Trainer Kit [Message Signal:100 Hz To 2.8 Khz, Carrier Signal 28 Khz To 108 Khz,Modulation : Balanced Modulator, Amplifier : Op Amp Based, Demodulation : Diode Detector & Lpf(6Th Order)] , Frequency Modulation Anddemodulation Kit [On-Board Message Signal With Variable Amp/Freq,On Board Carrier Signal Fm Modulation Using Xr 2206Ic,Demodulation Using Pll Detector And Lpf 4Th Order Lpf,Internal Power Supply +5V , +12V/ 500 Ma] , Super Heterodyne Am Radio Receiver Trainer Kit To Measure Sensitivity, Selectivity And Fidelity [On Board Variable Capacitor Tuning,Receiving Antenna,Local Oscillator,Bfo, Rf Amplifier, Mixer,If Amplifiers, Detectors, Agc,Audio O/P Amplifier, Speaker.Frequency Range: 400Khz To 1700Khz,If Frequency: 455 Khz.] , Pam, Pwm And Ppm Modulation And Demodulation Trainer Kit [Provides Sine Waveform Output Of 250Hz, 500Hz, 1 Khz, And 2 Khz With Amplitude Adjustments Of 0 - 5Vp-P. Switch Selectable Sampling Clock Of 4, 8, 16, 32 Khz. On-Board Features Analog Sample Circuit/Output, Sample & Hold Circuit/Output, Flat Top Circuit/Output, 4Th Order Butterworth Low Pass Filter With Cut Off Frequency Of 3.4 Khz.] , Analog Signal Sampling & Reconstruction Trainer Kit [±15V D.C. At 100Ma, Ic Regulated Power Supply, A.F. Signal Generator For Modulating Signal.Sampling Clock Generator To Provide Sampling Clock And Gate Pulse. Modulator Circuit For Flat-Top Natural And S/H Circuit. Demodulator Circuit To Reconstruct Input (Sinewave)] , Telephone Receiver Trainer Kit [Line In Section : One Dot Line Connection Port.Handset : One Handset Connection Port. Keyboard : 4X3 Matrix Keyboard.Dialer : Tone And Pulse. Facilities : Redial Up To 32 Digits, Mute, Redial, Flash, Pause Switches.Indicators : Line In, Hook, Tone And Ringer, Call Mute Section.Control : Ringer Volume Control, Ringer Speed Control.Speech Path : Fully Non-Blocking.Dial Pulse Ratio : 10 Pps + / - 10%.] , 100Mhz Digital Oscilloscope [Bandwidth: 100 Mhz, 2 Analog Channels+ Ext With Probes Included Rise Time: =3.5 Ns, Real-Time Sample Rate Of 1 Gsa/S 1% Dc Gain Accuracy Should Support Rs232/Uart, I2c And Spi Bus Triggers And Decodes Usb And Ethernet Connectivity] , 30Mhz Analog Cro [Dual Trace Dual Channel Oscilloscope. Bandwidth: 20Mhz. Full Bandwidth Sweeping Circuit , Tv-H / Tv-V Synchronization And Trigger-Lock To Observe All Kinds Of Signals Stably. Y Deflection Operation: Y1, Y2, Alt, Chop, Add, Mode.Horizontal Sweep Mode: Auto, Trig, Lock, Single.X-Y Mode Input: X-Axis Yi And Y-Axis Y2.] , 2 Mhz Function Generator [Frequency: 1Hz – 2 Mhz Sine, Square, Triangle, Ttl Output] , Digital Storage Oscilloscope (100 Mhz) [Bandwidth 100 Mhz, Channels: 2+, Display: Tft Color Lcd Of Suitable Size (Capacitive Touchscreen). Sampling Rate: 1 Gsa/S Real Time, Sampling Mode: Normal, Average (2, 4, 8, 16, 32, 64, 128, 256), Peak Detect. Mathematics: A+B, A-B, A×B, Fft (Fast Fourier Transform). Fft Windows: Rectangle, Hanning, Hamming, Blackman. Auto Measurement: Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1-2 (Rise), Delay1-2(Fall) ] , Trainer Kit For Rectifier With And Without Capacitor Filter For : — (A) Half-Wave Rectifier, (B) Full-Wave Rectifier, (C) Bridge Rectifier [Transformer Rating : 9-0-9V/200Ma, Rectifiers : Half Wave; Full Wave - Bridge, Center Tapped Rectifier,On-Board Dc Voltmeter : 0 - 20V,On-Board Ac Voltmeter : 0 - 20V,Load : Variable Resistive Load 10K,Filter Circuit : In-Built- Capacitor (3Nos.),In-Built- Inductor (1No.),Input Line Voltage : 230V Ac ± 10%, 50Hz] , Push-Pull Amplifier Trainer Kit [I.C Regulated Power Supply : +6 V.Digital Ac Voltmeter: 0 – 20 V.Digital Ac Milliammeter : 0 – 200 Ma.Set Of Resistances.Set Of Capacitors.Two Transistors Cl 100 And Ck 100.Connecting Wire.] , Fet Characteristics Trainer Kit [Variable Dc Regulated Power Supply Of 0-5V At 250Ma. Dual Range Dc Voltmeter Of 1.5V/15V.Dc Ammeter Of 0-20Ma.] , To Determine Frequency Response Characteristics Of Rc Coupled Amplifier Circuit And Calculation Of Bandwidth, Midband Gain, Input Impedance And Output Impedance For: (A) Single-Stage Amplifier (B) Double-Stage Amplifier [Sine Wave Oscillator 15Hz To 150Khz In Four Ranges With Amplifier & Amplitude Adjustable.Three Decade Resistances Bank In Steps Of 1K, 10K & 100K Per Steps Total Step 30.Two Pnp Transistors.] , Mosfet Characteristics Trainer Kit [On Board Ammeter And Voltmeter,Dual Variable Dc Power Supplies,On Board Mosfet And Fet With Resistors To Perform Experiments] , To Study The Input And Output Characteristics And To Find The H-Parameters Of A Bjt For : — (A) C-E Configuration, (B) C-C Configuration, (C) C-B Configuration [Power Supply 1) 0-1V Dc 2) 0-10V Dc.Meters Dc 65Mm Four Dial V, V , Ma Ua/ Ma.Transistor Cl100/ Similar] , Component Development System [Power Supplies On Boards 0-15 V And 0-30 V, 250 Ma Each Variable.Fixed Dc Regulated Power Supplies 15 V/250 Ma And 5 V/250 Ma.Ac Power Supply 15-0-15 V For Rectifier Applications.Various Components On The Trainer Set. ] , Kcl & Kvl Trainer Kit [Two Dc Ic Regulated Power Supplies 0-12 V/150 Ma, Two Mr65 Square/Digital Meters For Voltage & Current Measurement, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Power Cords 230 V, 50 Hz] , Thevenin’S And Norton’S Theorems Trainer Kit [Power Supply 2?3?0?V, Regulated & Short Circuit Proof Variable Dc Voltage Source – 01 No. Fixed Resistance Of Different Values. Dc Voltmeter.Dc Ammeter. Glass Fuse For Short Circuit Protection. On/Off Switch With Indication Light. Patch Cords Suitable To The Terminals With Board For Easy Interconnection.All Above Accessories Will Be Fitted On Bakelite Sheet Fixed On Box.] , Superposition Theorem Trainer Kit [Instrument Comprises Of Two Fixed Output Dc Regulated Power Suppliesof 12V & 5V At 500 Ma Current, Three Moving Coilmeter, Circuit Diagram Printed On The Front Panel & Connections Ofsupplies, Meter & Resistances Brought Out At 4Mm Sockets. ] , Maximum Power Transfer Theorem Trainer Kit [Ammeter 30Ma Dc. Voltmeter 12V Dc. Power Supplies: Dc Supply Ic Regulated 0-12V Dc, 150Ma. Operated On Mains Power 230V, 50Hz +10% Components Are Mounted On The Panels Are: Resistances 2Watts Variable Resistor Voltage Control Through Potentiometer. Fuse For Short Circuit Protection. Patch Cords 4Mm.] , Reciprocity Theorem Trainer Kit [Instrument Comprises Of One Fixed Output Dc Power Supply Of 12V At 300 Ma Current, Two Moving Coil Meters, Circuit Diagram Printed On The Fornt Panel & Connections Of Supplies, Meters & Resistances Brought On Terminals.] , Series And Parallel Resonant Circuit Trainer Kit [Analog Meters: Ammeter 20Ma Ac. Voltmeter 20V Ac. Components Mounted On The Panels Are: 3 Nos. Of Resistors Selected By Rotary Switch. 3 Nos. Of Capacitors Selected By Rotary Switch. 3 Nos. Of Inductors Selected By Rotary Switch.] , Low Pass And High Pass Filter( Rc & Lc) Constant K Type Trainer Kit [Instrument Comprises Low Pass Circuit Rc Type Instrument Comprises Low Pass Circuit Lc Type Instrument Comprises High Pass Circuit Rc Type Instrument Comprises High Pass Circuit Lc Type Instrument Fitted In Highly Shockproof Plastics Box] , T And ? Type Attenuator Trainer Kit [Instrument Comprises Ofdc Ic Regulated Power Supplies 0-15V/150Ma. Two Mr65 Square / Digital / Round Meters For Voltage & Current Measurement. T And Pie Network Provided On The Board. Variable Resistor Using Band Switch Is Mounted On The Board. Instrument Fitted In Highly Shockproof Plastics Box. Sufficient No Of 4Mm Patch Cords For Interconnection Instruction Manual For Student Workbook. Power Cords 230V, 50Hz] , To Study Standing Wave Pattern For A Transmission Line Of Finite Length With: (A) Open Termination, (B) Short Termination, And © Matched Termination. [Transmission Line : Coaxial Cable 100M ( 25M X 4 Nos) Impedance Matching Resistance : 0 To 100 ( 02 Nos ) Test Generator : 1. Sine Wave : 4 Khz To 4 Mhz. 2. Square Wave : 10 Khz. Interconnections : 4 Mm Sockets On All Input / Output Connections. Test Points : 10 On Board Circuit Mimic : Illustrates Functional Blocks For Ease Of Experimentation Power Requirement : 230V 10% 50Hz, 1 Ac. Accessories Provided : I. Set Of Patch Cords. Ii. Bnc To Bnc Cable. Iii. Bnc To Crocodile. Iv. Detailed Instruction Manual.] , Digital Trainer Kit (Experiment 1. -To Verify The Truth Table Of Not, Or, And, Nand, Nor, Xor, X-Nor With Ttl Logic Gates And Cmos Logic Gates. Experiment 2.- To Realize Different Boolean Expressions With Logic Gates. Experiment 3.-To Realize Half-Adder, Full-Adder, Subtractor, Parallel And Serial Full-Adder. Experiment 4-To Design 1’S Complement, 2’S Complement And 9’S Complement Adder-Subtractor.) [Dc +5V , 400Ma; Dc +12V, 250Ma; Dc -12 V, 250Ma, Dc0 To + 30V: Variable 100Ma,Ac Output: 12V-Ct-12V, 150Ma; Logic Data 8-Bit Debounced Set/Clear Ttl Output With Bicolour Led; Clock Generator I Hz To 200Khz Variable & Manual, Ttl & /Ttl(Complement) With Bicolour Led;Logic Probes 8-Bit 3-State Led Display High, Low, High Impedance; Function Generator Sine, Square, Triangle, 1 Hz To 250 Khz;Bread Boards : 3 X 820 Tie-Points; Total Short Circuit Protection From Any To Any Point On Board] , Complete Setup To Implement The Truth Table Of Encoder,Decoder, Multiplexer And De-Multiplexer. [The Trainer Kit Should Be Able To Verify The Truth Tables Of Truth Table Ofencoder,Decoder, Multiplexer And De-Multiplexer.] , Complete Setup To Design/Construct Parity Generator, Checker And Comparator. [Industry Standard Specification To Perform Relevant Experiments. ] , Flip Flop Trainer Kit [Kit For Verification Of Jk, Sr, D, And T Flip-Flop Truth Tables] , Complete Setup To Design / Construct Binary Synchronous And Asynchronous Counter. [Industry Standard Specification To Perform Relevant Experiments. ] , Complete Setup To Design / Construct Programmable Up/Down Counter. [Industry Standard Specification To Perform Relevant Experiments. ] , Complete Setup To Design Controlled Shift Register And Study Their Function. [Industry Standard Specification To Perform Relevant Experiments. ] , Trainer Kit To Study Different Memory Ics [Industry Standard Specification To Perform Relevant Experiments. ] , A/D & D/A Converter Trainer [Industry Standard Specification To Perform Relevant Experiments. ] , Trainer Kit To Interface Ttl And Cmos Ics. [Industry Standard Specification To Perform Relevant Experiments. ] , 8051 Trainer Kit [Operating Frequency : 10Mhz Crystal,40-Pin Ic Base | 40Pin-Zif Socket,2×16 Char Lcd Display,32 I/O Pins,32Kb-Sram,32Kb-Eeprom.] , Ct-31/51 Or 8031/51 Microcontroller Trainer Kit With Led Display, Usb Interface & Inbuilt Power Supply [Operating At 10/12 Mhz, On Board 8K Ram,8/16K Bytes Of Eeprom,48 I/O Lines,Hexadecimal Keyboard And Six Seven Segment Displays,Rs-232C Interface,Usb Interface] , Ct-31/51Lcdadu8031/51 Microcontroller Trainer With Lcd Display, Usb Interface, Adc, Dac& Inbuilt Power Supply [Trainer Based On 8051/89C52 Microcontroller.On Board 32K Ram.64 K Bytes Of Eeprom.20 X 2 Lcd Display.48 I/O Lines. Onboard Adc & Dac.] , Adc Interface Module [Usb Interface, Adc Module Module 10 Channel 12Bit Ad Sampling Data Acquisition Stm32 Uart Communication Adc Module] , Dac Interface Module [Operating Voltage 2.7-5.5 V. Interface Type I2c. Resolution 12 Bits.] , Lcd Display Module [Display Contents :16 * 2 Characters (5*8 Dots ). Lcd Size :80 X 36 Mm .Lcd Thickness :9.5 Mm.] , Keyboard Interface Module [5X4 Keys Matrix Keyboard. ] , Dc Motor Controller Module [Driver Module : L298n. Motor Supply Voltage (Max.): 46V.Motor Supply Current (Max.): 2A. ] , Stepper Motor Controller Interface Module [Robocraze Stepper Motor(28Ybj-48 Dc 5V 4 Phase 5 Wire) + Uln2003 Driver Board Compatible With Arduino] , Trafic Light Controller Module [Led Traffic Lights Signal Module/Digital Signal Output Traffic Light Module] , Temperature Measurement Module [Electrobot Dht11 Digital Temperature & Humidity Sensor Module For Arduino And Rpi] , Operational Amplifier Trainer Kit ( Ic 741 ) [Inbuilt Variable/Fixed Dc Regulated Power Supplies.Output Voltages : 0-5Vdc (2Nos.) (Variable), +12Vdc (Fixed).Transistor & Components Provided Ic : 741.Transistor : Cl 100 (Npn).] , Active Filter Trainer Kit (Lpf, Hpf, Bpf) [Opamp Based First Order Lpf, Hpf, Bof Trainer Kit (Mi-A14)] , Application Of Ic555 Timer Trainer Kit (Astable & Monostable Mv) [In-Built Regulated Dc Power Supply.On Board Manual Pulse Generator For Triggering The Monostable And Bistable Circuit.Inbuilt Led Output Indicator.Symbols And Diagram Are Printed On Glass Epoxy Pcb.] , Opamp Based Oscillator Trainer Kit ((A) Hartley, (B) Colpitt, (C) Phase Shift, (D) Wein Bridge) [Op-Amp Oscillator Trainer Mi-A13. Frequency 50-60 Mhz.] , Crystal Oscillator Trainer Kit (741 Based) [Industry Standard Specification To Perform Relevant Experiments. ] , Function Generation Kit (Using Icl8038) [Icl8038 Function Signal Generator Sine Triangle Wave Kit Diy Professional K5e8.Uses Icl8038 And High-Speed Op Amp, Higher Accuracy. Low Distortion Sine Wave: 1%.] , Voltage Regulator Trainer Kit (Using Ic723) [0-35V D.C. At 250Ma, Countinously Variable Unregulated Power Supply.D.C. Milliammeter, 65Mm Rectangular Dial With Switch Selectable Ranges Of 50Ma And 250Ma.D.C. Voltmeter, 65Mm Rectangular Dial With Switch Selectable Ranges Of 10V And 40V.Ic 723 Fitted On Base.Three Potentiometers.] , Function Generator Trainer Kit [Frequency Ranges: 1? Hz To 1?0? Hz, 1?0? Hz To 1?0?0? Hz Fuse:3?5?0? Ma, Slow Blow Automation Grade: Manual Power Supply:Max 2?3?0?V Ac, 5?0? Hz +/- 1?0?%] , Maxwells Bridge Trainer Kit [The Kit Contains A Bridge With Provision For Connections Of Capacitors And An Unknown Inductor. In Built Ac Supply [ 1 Khz And 2 Vpp ] And Dc Supply [ +5 V ] On Board. Two Nos Dial Resistances [ 50 Ohm To 200 Ohm ] And [ 1 Ohm To 11 Ohm ] In Step. A Dc And Ac Null Detector Using Selector Switch. A Dial Type Variable Capacitor [ Range 0.2 Uf Ro 1.2 Uf ] And Six Nos. Unknown Inductors [ Range 1 Mh To 12 Mh ].] , Lvdt Trainer Kit [Excitation Source Built In Ac Source 2.5 Khz Sine Approx. L.V.D.T. In Non Metallic Structure. Micrometer One (For Displacement) Displacement Range 10Mm. Test Points Sockets At Different Places For Signals. Potentiometer Two For Zero & Calibration Adjust Display (Mm) 3.5 Digit Digital Power Supply Ic Regulated Phase Detection Balanced Demodulator Power Supply Short Circuit &Overload Protected Mains 230V/50Hz Ac] , Strain Gauge Trainer Kit [Strain Gauge: 4 Mounted Upon Cantilever 150X3.5X3.5Mm, Stable Dc Voltage For Strain Gauge Bridge, Opamp Based,Precision Instrumentation Amplifier With Variable Gain,Potentiometer For Zero And Calibration Adjust,3.5 Digit Display For Strain/Weight, 230V 50Hz Ac] , Temperature Transducers Kit Using (A) Rtd (Pt-100) (B) Thermistor. [12 - 0 - -12 V 500Ma To Drive Digital Integrated Circuitry. 5 - 0 - -5 V 250Ma To Drive A To D Converter Signal Conditioning And Amplifying :Analog To Digital Converter. Display : 31/2 Digit Led Display Of 200 Mv Fsd Initial Set : Single Turn Potentiometer To Set Initial Temperature ( Room Temperature) Final Set : Single Turn Potentiometer To Calibrate The Instrument ( Max. Temperature) Select : 2 Way Rotary Switch To Select Rtdand Thermistor. Power On : Rocker Switch To Control Power Supply To The Instrument.] , Calibration Of A Single-Phase Energy Meter By Phantom Loading Trainer Kit [Usage/Application: Lab Experiment Connection:4?-Mm Patch Cord Single Phase Automation Grade:Manual Power:2?0?0? W Voltage:2?2?0?-2?4?0? V] , Calibration Of A Voltmeter Using Crompton Potentiometer Trainer Kit [This Trainer Is Supplied Along With Highly Regulated Dc Power Supplies To Operate The Unit. Further To Calibrate Pmmc Meters, Necessary Ratio Boxes Also Provided. Resistors Used In This Unit For Coarse And Fine Are Very Standard Type Made Of Manganin. This Enable The User To Measure The Potential In A Circuit Close To Micro Volts. Necessary Schematic/Wiring Diagram Printed On The Panel To Follow And Conduct Experiments. User Manual And 4Mm Patch Cords Supplied. Accessories Included: Necessary Dc Power Supplies, Ratio Boxes & Galvanometer Are Provided Alongwith The Unit.] , Cro Demonstration Kit [Crt : 6Rectangular Screen With Internal Graphical 8X10 Division (1Div-1Cm) Vertical Deflection Display : Ch1, Ch2, Add, Alt & Chop Deflection Factor : 5Mv/Div To 5V/Div +3%, 1Mv/Div To 1V/Div, +5% (X5), 10 Steps Rise Time : <17.2Ns Maximum Input Voltage : 250 (Dc + Ac Peak Value) When <1Khz (250V, Dc +Ac) Input Coupling : Ac, Dc & Gnd Polarity Selection : + (Ch2 Only) Display Mode : 1, 10 & X-Y Horizontal Deflection Time Base : 0.2Us/Div To 0.2S/Div, 9 Ranges Sweep Expansion : X10 Accuracy : +3% Triggering Mode : Auto, Norm, Tv-V, Tv-H Triggering Source : Int, Line & Ext. Trigger System Auto : 20Hz-20Mhz Norm : 0.5 Div Int, 0.5 Vp-P Ext Tv-H : At Least 1 Div Or 1 Vp-P Input Impedance : 1Mohm X-Y Phase Difference : <3 Degree, Dc-50 Khz Calibration Waveform : Frequency 1Khz 2%,Voltage 0.5 V 1%, Block Diagram Printed On The Top Panel, Power Requirement: 220 Vac +10% , 50 Hz] , Q-Meter Kit Formeasurement Ofq Of Coils. [Inductance Range:199.9Mµh-19.99H Resistance Range (Ohm):19.99O-19.99M? Capacitance Range:199.9P-1.999?F Capacitance Accuracy: ±(1%±2) Digital Lcr Bridge Meter Power:220 Volts/50Hz ±10%] , Spectrum Analyzer Trainer Kit [Industry Standard Specification To Perform Relevant Experiments. ] , Public Address System Trainer Kit [To Test The Performance Of Loudspeaker And Microphone; Power Output: 100W Rms At 10% Thd Pre-Amplifier Output: 200Mv; Line Output: 1V/ 1K?; Input Channels: Mic: 2Nos; Frequency Response : 65 Hz To 15 Khz +/- 3Db Tone Controls : Bass, Treble, Master 1Control; Speaker Outputs : 4 , 8 , 16 , 70-100V Line Matching; Speakers : 2 Nos; Microphones : 2 Nos(Dynamic Microphone)] , Demonstration Kit Of Black & White Tv Trainer [To Learn The Practical Aspects And Faults Which Would Occur Often In The Black And White Tv. All The Fault Switches Are Provided To Conduct Fault And Observe The Output. The Test Points Are Provided To Determine The Voltages At The Different Sections Of The Tv And Observe The Signal Output Of The Various Sections. The Output Is Monitored On A 20” Picture Tube.] , Demonstration Kit Of Colour Pattern Generator For Colour Tv [They Should Be Able To Make Various Patterns, Including Vertical Bar Patterns, Horizontal Bar Patterns, Circle Patterns, 100% White Patterns, Check Patterns, Horizontal Bar Patterns, Vertical Bar Patterns, Color Bar Patterns, Red Color Patterns, Green Color Patterns, Blue Color Patterns,Yellow Color Patterns, Magenta Color Patterns, And Cyan Color Patterns. Learning Materials To Be Included: Theory, Procedure, Reference Results, Etc.] , Demonstration Kit Of Colour Led Tv Trainer [Display Type: Led; Hd Screen Size: 24 Inch (50Cm) Or More; Display Resolution: 1600 X 900 Pixels Or More; Video Interface: Video Input/ Vga, Hdmi And Or Dvi Input; Audio Output Power: 8W X 2; Receiving System: Pal Bg/I/Dk And Ntsc; Channel Coverage: Vhf-2-12, Uhf21-69; Catv (X~Z+2, S11s41) Mains Supply: 110-260V Ac ± 10%, 50/60Hz; Power Consumption: 35W] , Demonstration Kit Of Dth Trainer Kit [Colour Tft Lcd: 5.7” Tft Lcd; Rf Input: 950 - 2150 Mhz; Rf Output: 470 Mhz Two 862Mhz; Video Output: Pal/Ntsc; Uplink Satellite: Insat 4B; Test Points: 34 Nos.; Included Accessories: Mains Cord, Power Supply, Remote, Dish Antenna With Accessories, Lnb] , Demonstration Kit Of Photocopier [Interface Hi-Speed Usb 2.0 Copy Speed Simplex To Simplex Up To 20 Ppm In A4 (21 Ppm In Letter) Scan Method Color Cis Compatibility Twain, Wia Fault-Creating Facilities For Crum, Thermistor, Stepper Motor, Pickup Clutch, Feed Sensor, Width Sensor, Scanner Stepper Motor, Scanner Sensor, And Printer Door. Various Fault Switch With Test Points Provided On-Board.] , Demonstration Kit Of Fully Automatic Washing Machine Trainer Kit [Semi/Fully Automatic Washing Machine Mechanical Controls 30 Minutes Timer, Wash/Spin Control Atleast 6 Liter Capacity Machine Fault Switches For Wash Motor, Spin Motor, Lid Opening, Buzzer Etc All Faults Are Mounted On Pcb With Enclosure] , Demonstration Kit Of Microwave Oven Trainer Kit [Type: Solo; Capacity: >15 Ltr; Power Consumption: 600 Watt Or More: Child Lock And Alarm, Various Test Points] , Demonstration Kit Of Refrigerator [Industry Standard Specification To Perform Relevant Experiments. ] , Demonstration Kit Of Air Conditioner. [Industry Standard Specification To Perform Relevant Experiments. ] , Tdmpulse Code Modulation Trainer Kit [Crystal Frequency: 12/16 Mhz On Board Generators, 1. Adjustable Amplitude Sine Generator Of 500Hz & I Khz (Synchronised) 2. Variable Amplitude Dc Level (2 Nos.) Input Channels: Two Multiplexing: Time Division Multiplexing Modulation: Pulse Code Modulation Sync Signals: Pseudo Random Sync. Code Modulation Error Check Code: Off, Odd, Even, Hamming Operating Modes: Fast 240 Khz Channel (Approx) And Slow I Khz Channel (Approx) Pc - Pc Communication: 2 Channel Via Rs 232 Baud Rate: Selectable From 300 To 2400 Fault Switches : 8 Nos. Through 8 Way Dip Switch For Troubleshooting At Different Blocks Should Include Various Test Points] , Tdm Pulse Code Demodulation Trainer Kit [2 Channel Time Division Multiplexed Pulse Code Modulation Receiver. Fast (240 Khz/Channel Approx) And Slow (1Hz. /Channel Approx.) Mode Of Operation Pseudo Random Sync. Code Generator For Frame Synchronization. Receiver Clock Generation Using Pll. Error Detection Of None, Even, Odd, Hamming. Error Correction Using The Hamming Code Technique None, Even, Odd, Hamming Parity Selections Two Nos. Of 4Th Order Butterworth Low Pass Filter With Cut Off Frequency Of 3.4 Khz. Four Switched Faults For Fault Selection Block Description Screen Printed On Glassy Epoxy Pcb] , Fdm Transmitter / Receiver Kit [Two Variable Modulating (Sinusoidal) Input Channels With Provision Of Voice Inputs Two Dsbsc Modulators For Frequency Band Translation Of Two Test Signals Two Carrier Generators Two Sets Of Audio Input Amplifier One Adder/Transmission Amplifier Two Demodulators Two Low Pass Filters For Smooth Output] , Ask / Psk / Fsk Modulation And Demodulation Kit [The Kit Should Have An Integrated Ask / Psk / Fsk Modulation And Demodulation. Various Functional Block Diagrams Are Provided On-Board For Teaching/Training. Test Points To Visualize The Signals On Oscilloscopes] , Microwave Test Bench (Klystronbased) [Complete Klystron-Based Test Bench Study Of The Characteristics Of The Klystron Tube And To Determine Its Tuning Range, To Determine The Frequency & Wavelength In A Rectangular Waveguide Working On Te 10 Mode, It Should Also Be A Ble To Study Characteristics Of The Directional Coupler, Attenuator And Isolator.] , Microwave Test Bench (Gunn Based) [To Study The V-I Characteristics Of Gunn Diode, To Study The Voice Communication By Using Microwave Test Bench, To Study The Following Characteristics Of Gunn Diode, It Should Also Be A Ble To Study Characteristics Of The Directional Coupler, Attenuator And Isolator.] , 24 Awg Tinned Single Strand Jumper Wire Spool Blue Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Green Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Red Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Black Colour [90 Meter Spool] , Flexible Electric Wire [2 Core, Twisted Flexible, Red And Black, 0.5 Sq Mm Copper Core, 50M Length] , Soldering Wire [Flux Core, Coil Type (Wire Of 100Gm )] , Inductor 1 Mh [8X10 Mm Radial Leaded Power] , Inductor 10 Mh [8X10 Mm Radial Leaded Power] , Led Red, Green, Blue, White Colour. Fifty Numbers Of Each Colour Led. [0.5W, Through Hole Type] , Ic 7400 [Ttl Ic-Quad 2-Input Nand Gate] , Ic 7402 [Ttl Ic-Quad 2-Input Nor Gate] , Ic 7404 [Ttl Ic-Hex Inverter Gate] , Ic 7408 [Ttl Ic-Quad 2-Input And Gate] , Ic 7432 [Ttl Ic-Quad 2-Input Or Gate] , Ic 7486 [Ttl Ic-Quad 2-Input Xor Gate] , Ic 7474 [Ttl Ic-Dual D Positive Edge Triggered Flip-Flop, Asynchronous Preset And Clear] , Ic 7476 [Ttl Ic-Dual J-K Flip-Flop, Asynchronous Preset And Clear] , Ic 7490 [Ttl Ic-Decade Counter (Separate Divide-By-2 And Divide-By-5 Sections)] , Ic 7495 [Ttl Ic-4-Bit Shift Register, Parallel In, Parallel Out, Serial Input] , Ic 74200 [Ttl Ic-256-Bit Ram (256X1)] , Ic 74147 [Ttl Ic Encoder] , Ic 74138 [Ttl Ic 3 To 8 Line Decoder] , Ic74151 [Ttl Ic Multiplexer] , Ic74138 [Ttl Ic Demultiplexer] , Ic 74169 [Ttl Ic Up-Down Counter] , Ic 74180 [Ttl Ic Parity Checker/Generator] , Ic 74Ls83 [Ttl Full Adder With Carry Ic] , Ic 74330 [Ttl Ic-Pla (12 Inputs, 50 Terms, 6 Outputs)] , Ic 4077 [Cmos Ic Xnor Gate] , Ic 4001 [Cmos Ic Nor Gate] , Ic 4011 [Cmos Ic Nand Gate] , Ic 4070 [Cmos Ic Exor Gate] , Ic 4071 [Cmos Ic Or Gate] , Ic 4077 [Cmos Ic Ex-Nor Gate] , Ic 4081 [Cmos Ic And Gate] , Ic 4093 [Cmos Ic Nand Gate] , Ic74ls47 [Bcd To 7-Segment Decoder/Driver Ic (7447 Ic) Dip-16 Package] , Lts542 [7-Segment Display - Common Anode] , Lts543 [7-Segment Display - Common Cathode] , Ic Dac0808 [Dac0808 8-Bit Digital To Analog D/A Converter Ic Dip-16 Package] , Ic Adc0809 [Adc0809 8-Bit A/D Converter With 8-Channel Multiplexer Ic Dip-28 Package] , Ic723 [Voltage Regulator Ic Input Voltage Up To 40V Output Voltage Adjustable From 2 To 37V Positive Or Negative Supply Operation Series, Shunt, Switching Or Floating Operation Output Current To 150Ma Without External Pass Transistor Adjustable Current Limiting] , Icl8038 [Function Generator Ic Wide Frequency Range - 0.001Hz To 300Khz Variable Duty Cycle - 2% To 98% High Level Outputs - Ttl To 28V Simultaneous Sine, Square, And Triangle Wave Outputs] , Ad633 [Analog Multiplier Ic 4-Quadrant Multiplication Low Cost, 8-Lead Soic And Pdip Packages Complete—No External Components Required Laser-Trimmed Accuracy And Stability Total Error Within 2% Of Full Scale Differential High Impedance X And Y Inputs High Impedance Unity-Gain Summing Input Laser-Trimmed 10 V Scaling Reference] , Lm566 [Vco Ic Wide Supply Voltage Range: 10V To 24V Very Linear Modulation Characteristics High Temperature Stability Excellent Supply Voltage Rejection 10 To 1 Frequency Range With Fixed Capacitor Frequency Programmable By Means Of Current, Voltage, Resistor Or Capacitor] , Ic Ne555 [Ne555 Timer Ic Dip-8 Package, Pack(Set) Of 30 Ics] , Ic 741 Op-Amp (Dip) [741 Ic - Dip Package - General Purpose Op-Amp Ic, Pack(Set) Of 50 Op-Amps] , Transistor 2N3904 [Pack (Set) Of 20 Transistors] , Transistor Bc107b [Pack (Set) Of 20 Transistors] , Diode 1N4007 [Pack (Set) Of 50 Diodes] , Fet- Bfw10 [Pack (Set) Of 50 Field Effect Transistors] , Zener Diode 5.6V, 1W [Pack (Set) Of 20 Zener Diodes] , Potentiometer 1 K?, 10 K?,100 K? Power Rating: 1W [20 Nos Of Each Value] , Wire Stripping Pliers, 6 Inch Long [Stainless Steel, Rust Resistant.] , Long Nose Mini-Pliers [Stainless Steel, Rust Resistant.] , Resistor 33O, 56O, 68O, 82O, 100O, 120O, 200O, 220O, 270O, 330O, 390O, 470O, 680O, 1K?,1.5K?. Maximium Power Rating 1/4W [Pack(Set) Of 50 Nos Of Each Resistor Value] , Resistor 2.2K?, 2.7K?, 3K?, 4.7K?, 5.6K?, 6.8K?, 8.2K?, 10K?, 20K?, 36K?, 56K?, 68K?, 100K?, 470K?, 1M?, 2M? Maximium Power Rating: 1/4W [Pack(Set) Of 50 Nos Of Each Resistor Value] , Disk Ceramic Capacitor Of Values 220 Pf, 0.01 ?F, 0.024?F, 0.1?F, 0.24?F [Pack(Set) 25 Nos Of Capacitors For Each Valueh] , Disk Ceramic Capacitor Of Values 10?F(63V), 100?F, 220?F, 470?F(50V) [Pack(Set) Of 25 Nos Of Capacitors For Each Value] , Polypropylene Capacitor Of Values 0.001 ?F,0.01 ?F, 0.1 ?F, 0.22 ?F [Pack(Set) Of 25 Nos Of Capacitors For Each Value] , Tantalum Capacitor 10 ?F (25 V) [Pack(Set) Of 25 Capacitors] , Incandescent Bulb, 40W, 100W, 200 W [With Tungstenfilament And B22 Connector]
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 10
West Bengal View Result →
50.
Communications and Information Technology  #11146150 AOC
Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - Electrical And Electronic Items - Socket 5Amp Socket 15 Amp Switch 15 Amp Multi Plug 15A 3 Core Wire Cable (Per Meter) 2 Core Wire Cable (Per Meter) Extension Board 4 Points (Cona/Anchor/Similar) Extension Board 8 Points (Heavy Duty) Repair Of Refrigerator (Supply & Fitting With Labour) Compressor 10 Condenser Coils 11 Evaporator Coils 12 Expansion Valve/Capillary Tube 13 Refrigerant 14 Thermostat 15 Evaporator Fan 16 Defrost Heater 17 Defrost Timer 18 Temperature Control Panel 19 Shelves & Drawers 20 Light Bulb/Led 21 Gasket (Door Seal) 22 Start Relay 23 Overload Protector 24 Control Board (Pcв) 25 Drain Pan 26 General Service Including Functional Testing And Minor Repair 27 Installation And Demo 28 Refrigerator Stand Repair Of Water Dispenser (Supply & Fitting With Labour) 29 Compressor 30 Heater Element 31 Thermostats 32 Cooling Fan 33 Water Taps/Spouts/Nozzles 34 Push Button/Lever 35 Drip Tray 36 Power Switches 37 Indicator Lights 38 Power Cord (Rs. In Meter) 39 Control Pcb/Board 40 Filter Cartridge 41 Bottle Support Spike/Probe 42 Float Valve/Water Level Sensor 43 General Service Including Functional Testing And Minor Repair 44 Service Of Water Dispenser Repair Of Air Purifier (Supply & Fitting With Labour) 45 Pre-Filter 46 Hepa Filter 47 Activated Carbon Filter 48 Uv-C Light 49 Lonizer 50 Service Of Air Purifier 51 Fan 52 Motor 53 Air Quality Sensor 79 Control Panel 54 Filter Replacement Indicator 55 Housing/Casing 56 Air Inlet Grille 57 Air Outlet/Vent 58 Display Screen 59 Wi-Fi/Bluetooth Module 60 Timer 61 62 General Service Including Functional Testing And Minor Repair Installation And Demo Shredding Machine(Supply & Fitting With Labour) 63 Cutting Blades/Cutters 64 Motor 65 Gearbox 66 Feed Slot/Input Tray 67 Paper Guide 68 Bin/Basket 69 Sensor (Auto Start/Stoр) 70 Control Panel 71 Reverse Switch 72 Safety Interlock Switch 73 Cooling Fan 74 Thermal Overload Protector 75 Shred Size Adjustment 76 Casters/Wheels 77 Housing/Frame 78 Power Supply Cord 79 Oil Applicator/Reservoir 80 Jam Indicator Light 81 Bin Full Indicator 82 Shredding Machine Service Electric Geyser(Supply & Fitting With Labour) 83 Heating Element 84 Thermostat 85 Thermal Cut-Out 86 Inlet Pipe 87 Outlet Pipе 88 Magnesium Anode Rod 89 Insulation Layer 90 Pressure Relief Valve 91 Thermostat Knob/Control Dial 92 Mounting Bracket 93 Drain Valve 94 Fuse 95 Digital Display 96 Timer 97 General Service 98 Installation And Demo Microwave Oven(Supply & Fitting With Labour) 99 Magnetron 100 Waveguide 101 Turntable/Motor 102 Control Panel 103 Timer/Clock 104 Door And Door Latch 105 Door Interlock Switch 106 Cavity(Cooking Chamber) 107 Cavity Light 108 Glass Tray 109 High Voltage Transformer 110 Cooling Fan 111 Thermal Fuse 112 Capacitor 113 Diode 114 Ventilation Grille 115 Control Board/Pcв 116 Outer Casing 117 General Service(Minor Repair) Oven(Supply & Fitting With Labour) 118 Heating Element 119 Thermostat 120 Temperature Control Knob 121 Insulated Cabinet 122 Trays Of Shelves 123 Glass Door/Panel 124 Indicator Light 125 Power Cord/Pulg 126 On/Off Switch 127 Fan 128 General Service (Minor Repair) Tube Lights/Panel Lights(Supply & Fitting With Labour) 129 Fluorescent Tube 130 Led Panel (22) 36 Watt 131 Led Round Light 12 Watt 132 Led Tube 20 Watt 133 Bulb Holder 134 Starter 135 Ballast 136 Cap/End Caps 137 Housing/Fixture Body 138 Reflector 139 Wiring 140 Mounting Bracket/Clips 141 Switch/Connector 142 Diffuser 143 Led Driver 144 Mounting Clips Or Hinges 145 Ceiling Mounting Kit Electric Kettle(Supply & Fitting With Labour) 146 Heating Element 147 Thermostat 148 On/Off Switch Oil Filled Radiator Room Heater(Supply & Fitting With Labour) 149 Thermal Oil (Diathermic Oil) 150 Heating Element 151 Thermostat 152 Control Panel Blower Heater(Supply & Fitting With Labour) 153 Heating Element (Coil) 154 Fan/Blower 155 Fan Motor 156 Thermostat Tv/Led(Supply & Fitting With Labour) 157 Main Board (Motherboard) 158 Remote 159 T-Con Board(Timing Control Baord) 160 Led Backlight System 161 Speakers 162 Mounting Hardware/Stand 163 Installation And Demo
Contract Date: Ref. Documents Contract Value : 5.52 Lakh
Government Departments No of Bidders 6
TenderDetail
Loading tenders