View Bid Results For Electrical Measuring And Testing Equipment Tenders

We found 405 Bid Results related to electrical measuring and testing equipment tenders. You can find Contractor details who won electrical measuring and testing equipment tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–9 of 405 tenders matching your filters

Water Resources and Irrigation #11454169 AOC

Contract Date: Ref. Documents Contract Value : ₹ 2.41 Crore

Government Departments No of Bidders 3

Uttar Pradesh View Result →

Housing Urban and Rular Development #11415087 Technical Bid

Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Indian Cables Ltd./ Polycab / repair renovation Cables / Finolex / Havells Cables. 35 Sqmm Size , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , -Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 105 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , -Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Clear Water Pump: Supplying, Erection, Testing And Commissioning Of Horizontal Motor Pumping Set For Clear Water Having Head As Per The Indicated Requirements Of Discharge In Lpm And Power Capacity In Bhp As Per Is Marked 8400 Lpm X 30.00 M Head (At Mbs) , Ns Item -Design, Construction, Erection And Commissioning Of 1 Ranneywell (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 30 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 1.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Haryana View Result →

Educational and Research Institute #11403991 AOC

Contract Date: Jun 27, 2026 Contract Value : ₹ 4.95 Lakh

Local Bodies No of Bidders 5

Kerala View Result →

Educational and Research Institute #11299551 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Tamil Nadu View Result →

Housing Urban and Rular Development #11294593 Technical Bid

Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Ns Item - Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (35 Sqmm Size) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 200 Kva (As Per Parameters Of Cpcb 4) 200 Kva (As Per Parameters Of Cpcb 4) , Supplying, Erection, Testing And Commissioning Of Horizontal Centrifugal Clear Water Pumping Set Capacity 2780 Lpm X 50 M Head, 45 Bhp Motor, Complete With Installation At Mbs Near Yamuna River. , Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 45 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Design, Construction, Erection And Commissioning Of 2 No. Ranneywell 1 At Machhrola And 1 At Jajjal (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 32 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 2.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Haryana View Result →

Defence #11281747 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 5

Rajasthan View Result →

Health and Family Welfare #11269383 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 6

Madhya Pradesh View Result →

Public Administrative Department #11258632 AOC

Contract Date: Jun 10, 2026 Contract Value : ₹ 94.40 Lakh

Government Departments No of Bidders 3

Maharashtra View Result →

Housing Urban and Rular Development #11162283 AOC

Providing the manpower for electrical preventive and breakdown maintenance Day to day operation & maintenance of entire electrical installations including Sub-Station, compound lighting, DG operation, dusting and cleaning of fire detection sensors and others parts, operationof liftsetc at the Technician Studio, Kolkata-700033for the period of 12 months.- 1 Day to day operation & maintenance of entire electrical installations including Sub-Station, compound lighting, DG operation, dusting and cleaning of fire detection sensors and others parts, operationof liftsetc at the Technician Studio, Kolkata-700033 2 Skill Electrician: 03 Nos per day 3 Semi-Skill Electrician: 03 Nos per day 4 Un-Skill Electrician: 02 Nos. per day 5 Semi-Skill (Lift Operatror cum Attendent): 02 Nos. per day 6 SCOPE OF WORK:-1. The Scope of maintenance of electrical installation includes Routine, Preventive and Corrective Maintenance of L.T. Distribution lines to each floor of all the buildings/ blocks, entire wirings, BDB, PDB, VTPN, LT panels, Feeder Pillar Box, power & distribution cables, fittings & fixtures, Switch Boards, Power and Computer Points, Power outlet of all sorts of Air-conditioning Systems,resetting/ Switching off of Fire detection system during normal operation/ malfunctioning etc., Operation, configuration & repair / replacement of Timers for AC / Compound light, Compound Lighting including high mast, all glow sign and metal sign boards in the campus, Electrical Installations/ distribution up to Switch Board/ Panel of Lift Machine Room & Pump Room and / or Kiosk of Pump for Water Supply system, in the premises of above mentioned site. 7 2. Cleaning & checking of all the fittings & fixtures, Panels, TPN & SPN DBs, SFUs & other Electrical Installations, as well as the Compound Light installations in a regular interval to keep them in a tip-top condition at the cost of the agency and the same must be recorded in log book.3. The checking & repairing of the different types of light fittings, ceiling fans, exhaust fans etc. has to be done by the agency at his own cost (except rewinding of ceiling fans and exhaust fans) including dismantling and re-fixing of the same. (Major materials to be supplied by department). Especially, all the ceiling fans of entire worksite are to be inspected, at least once in 3(three) Months, in respect of Split Pin, Jam nut etc. to prevent unwanted falling of Ceiling Fans, failing which responsibility will be fixed up upon the agency. Split Pin, once taken out from the installation should not be re-used under any circumstances. Required number of Split Pin and Jam nut should be provided by the agency at their own cost. Building wise Fan register should be maintained as per Performa provided by the department, wherein each and every details of checking, replacement of spares, repairing etc. should be recorded against individual fan and every record should be signed by the attending Electrician / responsible person of the agency, duly countersigned by the concerned J.E. and A.E. 8 4. Measuring of various electrical parameters e.g. Current, Voltage, Temperature of different L.T. panel board, BDBs, Main switches etc., test of Insulation Resistance, Earth Resistance etc. are to be carried out every month and test results are to be recorded in Log book (preventive maintenance). Thermal Imaging Scanner should be used for measuring temperature of electrical equipment regularly to find out any abnormalities and printout of thermal image with date and time stamp should be provided to the concerned J.E. and A.E. In case, any abnormal reading is noticed, the same should be rectified/set right immediately by taking prompt, appropriate & effective measures/actions in consultation with concerned AE&JE. Thermal image should also be taken after rectification. The engaged agency will supervision overall maintenance works and examine Logbooks for any abnormality and sign the Logbook accordingly5. Switching On/Off of the common service lighting e.g. compound, corridors, staircases etc. and AC machines, Light, Fan etc in closed room like Library, Store, OPD, OT or these are not run beyond Office hours or off day will be the responsibility of the agency. 6.Cleaning of Sub-station rooms,LT Panel rooms,operation of HT switch gear & resetting the protective rekeys in case of any fault occurred will be the responsoibilty by the agency . 9 7. Operation of DG sets & checking and maintenance of AMF panel, Checking of Battery, checking of fuel level of DG Set, Lubricating oil etc, carrying & pouring of Fuel if necessary and maintaining separate log book for DG Set as per given Proforma. For Operation of DG Sets, experienced and skilled operator should be provided8.Llift operation cum attendent including regular cleaning of lifts etc as per direction of EIC.9. Regular dusting and cleaning of fire detection sensors and others parts including reset of fire alarms. 10 TERMS & CONDITIONS:-1. The agency has to depute manpower as directed by the EIC carrying out the maintenance work smoothly with due regard to the safety.Category of Staff:- i) Skilled Electrician --03 (Three) Nos per day ii) Semi-Skill Electrician--03(Three) Nos. per day iii) Un-Skill Electrician: 02 Nos. per dayiv) Semi-Skill (Lift Operatror cum Attendent): 02 Nos per day 11 2. The Maintenance Personnel, deputed by the agency havingvalid Voter Identity/ Adhaar Card and should possess valid Workman Permit/ License, as mentioned below, issued by Directorate of Electricity, Govt. of West Bengal.Category of Maintenance Personnel Mandatory Requirementa. Skilled Electrician Having Electrical/ Workman Permit i(b), ii & iv issued by Directorate of Electricity, West Bengal.b. Semi-Skilled Electrician Workman Permit i(b) and (ii) issued by Directorate of Electricity, West Bengal.c. Un-skilled Personnel/ Helper Basic knowledge of Electrical works.Also the Superviser of the company should have valid SCC Parts 1,2,3,4,5,6A,7A,7B ,9,11,12. 12 3. Agency must have to submit mandatorily the list of staff mentioning their Name, contact Mobile No., category, along with photo copy Valid Workman Permit, proper identity and address proof etc, in writing to the concerned JE & AE before commencing the work. All the photocopy should be attested and authenticated by the Agency.4) The agency will issue a photo Identity Card, duly signed by the agency and countersigned by the concerned JE / AE to all the Maintenance Staffs deployed including substitutes.They should always carry the said Photo Identity Card while on duty. The agency should also submit one copy of the said Identity Cards to the JE.5) The agency will maintain shift wise attendance register at call center to record the attendance of the staffs on duty which will be authenticated/ verified by the concerned Junior Engineer/ Officer- in-charge. 13 6) The agency shall have to prepare a Duty Roster of the Maintenance Staffs at the beginning of every month, or as directed from time to time. A copy of the said Duty Roster, duly signed by all staffs, should be submitted to the concerned JE and one copy should be available at the call centre.7)The agency will have to provide proper uniform for his maintenance staff at his own cost and clour of the dress will be decided by the EIC. No staff will be allowed for performing duty without proper uniform. 8) The agency, and all the electricians deputed at worksite must have Mobile Nos. and the same should be intimated to the E.I.C., A.E. & J.E concerned, in writing. The telephone call should be responded without delay. 14 9) The agency has to provide one GPS activated smart phone dedicated for call center. The cost of the handset and running cost i.e. phone bills have to be borne by the agency. No claim of payment against any telephone bill will be entertained by this department.10) The agency should have a close watch on the attendance of the Maintenance Staffs. In case of absence of any Maintenance Staffs, the agency shall have to arrange for suitable alternative within an Hour, failing which, the charges for that day will be deducted from the bill of the agency on pro-rata basis.The Executive Engineer,Electrical Constrution Division ,P.W.D. reserves the right to terminate the contract in case of absence of Maintenance Staffs for more than three consecutive days, without showing further reason. 15 11) In case of any Accident and or physical illness of the staffs of the agency, while on duty, no claim will be entertained by this department and all responsibilities thereof should be shouldered by the agency only. Minimum wages as per existing Labor Act should be paid to the Electrician(s) and Helper(s)12) The agency shall have to provide 500V Megger, Digital Multi meter, Earth tester and all other requisite tools and tackles sufficient for checking, testing and recording of health of all electrical installations. Other tools & tackles e.g. Crimping Machine, Line Tester, Screw Driver, Pliers, Stripper, Sockets of some common sizes etc. should also be available at site, in sufficient quantities, free of cost, under disposal of their maintenance staff.Deployed employee by the agency should have sufficient knowledge to operate The Thermal imaging Scanner or to be used by the direction of Assistant Engineer/ Junior Engineer.13) The space for sitting accommodation for the staffs of the agency inside worksite premises will be provided by the competent authority. 16 14) All the maintenance staff of the contractor should have proper & constant vigilance and check that, there is no sign of heating-up, burning smell, discoloration or sparking at any of BDBs, panel boards, rising main etc. due to overloading or loose termination. Care should be taken to check any highly unbalance in loading at any point.15) In case of power failure or development of any unfavorable situation the agency will have to communicate with the concerned Power Supply Company authority and extend help or cooperation to said authority in restoration of power supply. Meanwhile the agency will have to operate the switching mechanisms of interconnections among available sources at suitable locations to maintain power supplies at important locations by monitoring and/ or restricting electrical loads in consultation with the concerned Junior Engineers & Assistant Engineer.16) Routine checking and preventive maintenance and breakdown maintenanceof the electrical installations has to be carried out by the agency maintaining a register under signature of respective Junior Engineer and Assistant Engineer with a view to ensure uninterrupted power supply within worksite campus. 17 17) Materials required as replacement during maintenance of electrical installations e.g. Lamps, SFUs, SPNDB, TPNDB, Cables etc. will be supplied by the Department for which requisition of Materials, signed by the authorized representative of the agency, should be submitted to the concerned JE (Electrical) well in advance. A separate material stock register should be maintained by the agency where entries related to Issue, Consumption & present stock position of Materials should be made. However auxiliary items like fuse wires, screws, nuts, bolts, washers, insulating tape, Split pins of Ceiling Fans, dusters etc. will have to be supplied by the agency at his/ their own expense.18) The agency shall have to deposit all dismantled unserviceable materials such as fused lamps, defective condensers, starters, and timers, MCBs etc. to the concerned Section Office or any other locations within worksite premises by the agency by its own laborers / arrangements / tools and tackles as per the direction of the Assistant Engineer/ JE concerned. Fresh materials will be issued against respective defective materials. No materials should be taken out of the maintenance site without the permission and necessary challan of the site-in-charge/JE 18 19) Any major shut down or fault should be brought to the notice of JE/AE immediately in writing and over telephone for further course of action. The agency will also have to attend emergency calls immediately at the site with staff, tools etc. on demand. 19 20) In case of any breakdown caused by cable fault etc., if situation demands the agency will have to restore the power supply temporarily either with the materials available with this department or arranging the same temporarily and safely at his own cost till completion of original restoration work.21) Building wise Log book is to be maintained for Preventive Maintenance & Cleaning and Corrective Maintenance of Electrical equipment except Fan as per direction of E.I.C. Separate Building wise Register is to be maintained for Ceiling Fans. The daily record of the Log book is to be signed by the responsible person and verified & signed by concerned JE & AE and photocopy of the same should be sent to the Executive Engineer concerned through proper channel at the time of submission of bills. The Logbooks should be available at Call center and should be produced on demand. 20 21) The agency should be responsible for any damage in the installation due to mishandling or mal- operation by its staff and shall be liable for rectification / replacement, as the case may be, of the damaged installation/ equipment within time frame to be fixed by concerned A.E., failing which the said rectification/ replacement of affected equipment/ installation would be executed by external agency and the cost thereof would be recovered from the bill and the accused staff should be replaced immediately.22) Bills should be submitted quarterly with the certification of satisfactory performance of the concerned JE and AE. Photocopy of Logbook and Attendance Register should also accompany the Bill. Payment should be made as per PWD norms. 21 23) Any fault of electrical installations starting from LT supply end (except the installations of Power Supply Company) to light, fan, call bell, plug points etc. i.e. LT cables and all sub-panels, distribution boards, main switches, earthing attachments, compound lights etc. has to be detected, attended and restored by the agency by its own man power with the help of the materials(cables, main switches, DBs, wires, HRC fuses etc.) available from this department or as per the terms & conditions of this contract. 24) If any kind of incapability & negligence are noticed in observing all the above-said terms & conditions causing inconveniences to public service, is subject to unilateral penalty, be it detected on the spot or thereafter (even after payment). This Department also reserves the right to deduct the cost from the bills of the contractor on pro-rate basis as determined by the Engineer –In-Charge for any shortfall in observing above T&C. In that case, the above- said contract may be terminated without issuing any notice and Stringent & punishable action may be taken against the contractor. 22 25) The technitian of the agency should capable of Casing -caping /rigid conduit wiring to overcome the emergent situation .25) The contract may be terminated with one months’ notice on either side (both agency and tender awarding authority) . 26) At the time of Bill submission must submit payment acquaintance of staff wages ,ESI & PF in which signature of each staff with revenue stamp is necessary .27) Any upcoming / Ongoing project, which will be completed within stipulated period of Maintenance contract, automatically will come under maintenance contract .28) All the log-books should be available at the call center and to be produced to the Office of the AE/ JE on demand. 29) This Maintenance contract covers all the buildings, blocks, outdoor electrical gadgets within the premises ofTechnician Studio, Kolkata-700033 23 TERMS & CONDITIONS FOR OPERATION OF LIFTS:- 24 1. The agency has to depute manpower as directed by the EIC carrying out the lift operation smoothly with due regard to the safety.Category of Staff:- Semi-Skill (Lift Operatror cum Attendent): 02 Nos. 25 2. Day to day Attendent -cum -operation of passenger lift foras directed by the EIC.3. The lift operator/attendant should have a sound knowledge with valid lift operator license issued by the Licensing Board, Govt. of West Bengal.4. The operator/attendant should be obliging dutiful and polite to all while on duty. In case any irregularities of duty or complain against the operator/attendant if noticed, would be withdrawn forthwith and shall be replaced by new operator.5. The report is to be submitted periodically about the working of lift incl. all safety devices and Governor to the concerned JE/AE. 26 6. Agency must have to produce the list of the staff mentioning their Name, contact Mobile No.in writing with proper identity and address proof & their Valid lift operator license issued by the Licensing Board, Govt. of West Bengal along with photo copy to the concerned JE & AE before commencing the work. This should be treated as mandatory.7. The agency will have to provide proper dress for his staff and color of the dress will be decided by this department. No staff will be allowed for performing duty without proper dress.8. The agency will issue a photo Identity Card, duly signed by the agency and countersigned by the concerned JE / AE to all the operation Staffs deployed including substitutes. They should always carry the said Photo Identity Card while on duty. The agency should also submit one copy of the said Identity Cards to the JE 27 9. The agency shall have to prepare a Duty Roster of the operation Staff at the beginning of every month, or as directed from time to time. A copy of the said Duty Roster, duly signed by all staffs, should be submitted to the concerned JE.10. The agency must have separate contact telephone numbers with Mobile Nos. for his office and Supervisor deputed at worksite so that the agency may be communicated in case of any urgency and the same should be intimated to the E.I.C., A.E. & J.E concerned, in writing. The telephone call should be responded without delay.11. The lift enclosure to be kept clean (not sweepers works) regularly by the operator 28 12. The operational work of the lift is to be supervised directly under the supervision of technical staff of the contractors under the direct control of JE/AE concerned. The contractor shall be responsible for any damage to the lift due to mishandling; loss will be recovered from the contractors bill as per direction of EIC.13. The Log Book recording regarding functioning and breakdown of the lift is to be maintained at site by the contractor under supervisions of JE concerned. If any kind of trouble arises, it should be brought to the notice of JE, AE concerned immediately. The JE/AE would put their signature on log book making note on performance. 29 14. In case of any absence of operator, the lift is to be made operative within 2 hours by placing the new operator. In case of absence prorate deduction will be made from the contractors bill and the contract may be terminated if it exceeds 3 (three) days. In this respect Executive Engineer’s decision will be final.15. This department would not be held responsibility for any accident of the liftman on duty for any reasons. The contractor or their lift operators on duty would not claim any compensation in any shape from this department for such accident. 30 16. The Executive Engineer,Electrical ConstructionDivision, P.W.Dte. would have sole authority to cancel the contract without assigning any reason with a notice of one month only.17. Any conditional quotation offered would not be accepted.18. Any quotation offered with price variation clause would not be accepted.19. The payment will be made monthly/quarterly on submission of bill in triplicate by the agency with satisfactory report regarding performance by the concerned JE/AE. Copy of log book has to be enclosed with the bill. 31 20. Persons entrusted by the agency for operation of lift should wear photo Identity Card during duty hours.21. Documentary evidence in support of payment of minimum wages as per Labour Act to be produced to the Principal Employer i.e. Executive Engineer, Electrical Construction Division, P.W.Dte. in-charge of works.22. Rescue operation is in the scope of agency in case of exigency arises out of lifts getting stopped in between landing floors with passengers inside cage.23. No claim towards cost of uniform, PPE e.g. Hand Gloves, Mask, Goggles, protective body- ware etc. for the maintenance staffs should be entertained by this department. However, if any such equipment/ dress is available from the Hospital Authority for their statutory requirement, the same would be provided. BUT IN NO CASE IT SHOULD BE ENTERTAINED AS MANDATORY CLAIM.24.At the time of Bill submission must submit payment acquaintance of staff wages ,ESI & PF in which signature of each staff with revenue stamp is necessary .

Contract Date: Mar 09, 2026 Contract Value : ₹ 14.46 Lakh

Government Departments No of Bidders 4

West Bengal View Result →

10.

Public Administrative Department #11162234 AOC

Contract Date: May 25, 2026 Contract Value : ₹ 23.96 Lakh

Government Departments No of Bidders 3

Maharashtra View Result →

11.

Defence #11097521 AOC

Contract Date: Jun 20, 2026 Contract Value : ₹ 6.14 Crore

Statutory Bodies & Commissions/Committees No of Bidders 9

Ladakh View Result →

12.

Health and Family Welfare #11063604 AOC

Procurement And Supply Of Medical Equipment & Furniture Items For Establishment Of Mini Hub At Area Hospital Patancheru In Sangareddy District- Vernier Calipers 0-150 Mm, Screw Gauge 0-25 Mm, Measurement Tapes Both Steel ( 3.0 M, 5.0 M ) & Fibre ( 15.0 M ) , Weighing Machine 5.0 Kg Capacity, Sieves For Coarse Aggregate, Sieves For Fine Aggregate, Cube Moulds Isi Marked 150 X150 X 150 Mm ( 6 Nos. ) , Compression Testing Machine, Slump Cone, Carpenter’S Square 150Mm With Graduations, Electrical Meggar 1100 V, Spirit Level, Plumb Bob, Measuring Jars ( 2 ) 250Ml , Magnetic Compass, Batching And Mixing Plant For Concrete Mixing ( 15-20 Cum Capacity ) .

Contract Date: Ref. Documents Contract Value : ₹ 1.06 Lakh

Government Departments No of Bidders 1

Telangana View Result →

13.

Power #11055259 AOC

Contract Date: May 11, 2026 Contract Value : ₹ 242.30 Crore

Government Departments No of Bidders 3

West Bengal View Result →

14.

Public Administrative Department #11047153 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Trust & NGO No of Bidders 2

Maharashtra View Result →

15.

Power #10977330 Price Bid

Upgradation of EOT crane 65 Ton installed at Gate chamber of BHEP-I- 1 SITC of one no. Main Hoisting Motor (specifications TYPE OF MOTOR- SQ. CAGE(D/E), FRAMING SIZE -VD 250M, KW RATING-28.70, NO. OF POLES OF MOTOR-6,START/HOUR-150, RPM OF MOTOR-975, make ALSTOM/BBL or equivalent), Replacement of one no. EHTBrake of Main Hoist( specifications THRUSTER CAPACITY in kgs-18, TORQUE RATING 42.00 kg-m, DRUM DIA- 300 mm, MAKE SOC or equivalent),Replacement of one no. DCEM(DISC) Brake of Main Hoist( specificationsTORQUE RATING 45.87 kg-m, DRUM DIA- FDB-30 mm, MAKE EMCO or equivalent). 2 SITC of limit switches(make ELECTROMAG/SOC/MAGCO or equivalent) 10amp with complete control panel circuit , power supply copper coated cable 415v-3 phase ,93 sqmm, control supply wire 110vac with olr circuit breakers, repair ofcabin room for D/G EOT crane , replacement of DSL Bus bar system and bridge control panel towing arm and other allied equipments and with supporting iron channelClamp and power supply.Thejob also including 04no. 400wattage of halogen high beam light and 04no. of 250wattage of flood light with control light and all electrical equipments & wiring replacement of EOT crane. (providing & fitting of New control Panel)Make of panel inclusions -Schneider, ABB, Rita. Cable make : Havels, Polycab 3 Providing and fitting of wire Rope as per installedDia- 22mm,construction- 6x36, type- fibre core quality-1960N/mm2, galvanized , breaking strength-313kn make –usha martin or equivalent, height of lift 27.0mtr&length of each rope drumis 4850mm, length of wire rope 380m, providing and fitting of HOOK along with safety hook(make RAMSHORN or equivalent ) as per sample available at site 4 SITC ofmicro motor (5.5kw/945rpm type sq, cage ,frame size- D 132M,no. of poles of motor-6, start/hour-150) 5 SITC of one no. micro brake type EHT (drum dia-250mm, torque rating-18kg-m, thruster capacity-18 kgs) SITC of one no. micro brake type ACEM(drum dia-180mm, torque rating-10.20kg-m, make- BCH or equivalent) 6 SITC of micro motor 0.7kw/840rpm type sq. cage framing size D90S, no. of poles of motor-6, start/hour-150, make –ALSTOM or equivalent. 7 Providing and Removing white or color wash by scrapping and sand papering , steel Brush , Air compressor and preparing the surface smooth including necessary repairs to scratches etc EOT Crane with scaffolding 20mtr height complete. 8 Providing of priming Coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works OF EOT CRANE including scaffolding. 9 Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even/same shade, one or more coats on old work of EOT CRANE with scaffolding. 10 Complete job of Overhauling and greasing with alignment of track and replace of wheel roller, bearing of rail lines of complete job of crane with using scaffolding , chain pulley & other accessories 20mtr height. Load test will be done again after Complete bearings overhauling. 11 SITC of Distance /proximity sensors to measure the movement of Lifting beam during the operation of Gates and other allied work .Installation of HMI,PLC System based control panel of reputed make for exact measuring of gate travelling in meter for up and down movement with the help of Gear box and Encoder system along with complete wiring and other allied work. The screen at least 4ftx2ft on the both side of the girders of the crane. 12 SITC OF Load Display system of complete upgraded microprocessor controller safety system i.e Load cell. The upgrade system compatible to the Existing system fitted on the EOT crane functionally as well as physically. Display unit size 2ftx4ft is to installed on the both side of the grider of Eot crane and include overload hooter will automatically give the indication. The climate range 10degree to 5 degree throughout the year and with moisture during rainy season the display is ip66/65 waterproof. The display unit LED suitable for working day and night. 13 SITC OF Wireless Radio Remote (RRC)Control system to operate the Eot crane include Radio Remote Control , transmitter-joy stick type pushbutton type, Receiver ,Antenna And Cable ,Two set of Ni-Ah batteries and Battery charger. The remote control unit is operate to MAIN POWER , MAIN HOIST,LONG TRAVELL FORWARD & REVERSE AND ALSO Emergency Stop ON/OFF Control.The vendor shall consider all items whether or not specifically mentioned for successful completion of supply installation and commissioning of RRC system in Eot crane. Installation of RRC receiver, selector switch and interface panel/ junction box on Eot crane and laying and termination of cable betweenRRC receiver, interface panel/ junction box and crane control panels. Vendor shall consider lump Sum quantity for length of cable to be supplied for connections, Alternatively, vendor can visit site prior to submitting the bid for measurement if required, no additional payment for unit length of cable supplied will be allowed. Cables shall be connected on terminal blocks or must be property crimped and connected the receiver interface panel/junction box and crane Control panel. A selector switch shall be provided on the crane for selection of operation between pendant mode and RRC mode, Vendor has to submit two copies of connection diagrams of receiver, interface panel/ junction box and crane control panel. The vendor has to provide onsite training after successful testing and commissioning of the RRC system. 14 Alignment of gantry track by way of removal of old damaged part of track (approx. 20m)by way of dismantling of old rails and installation of new track wherever required by way of grouting and welding of new track with existing track. The job also includes alignment of new rails wherever required including welding of all rail joints, replacing the damaged clamp bolts. rail joints existing concrete. The alignment of the rails has to be done in accordance with the existing rails and the span, rail levels and alignment rails shall not exceed as per standard Tolerances. Packing should be provided where it is required and also application of epoxy mortar system of ASTM C-881 on oldConcrete and laser alignment of complete track.The material shall comply to IS: 800-2007 (or latest) - Indian StandardCode of practice for General Construction in steel.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Jammu And Kashmir View Result →

16.

Educational and Research Institute #10967168 AOC

Contract Date: May 05, 2026 Contract Value : ₹ 7.71 Crore

Government Departments No of Bidders 1

Assam View Result →

17.

Educational and Research Institute #10908628 AOC

Notice Inviting E-Tender For Laboratory Setup For Vtcs Of Jhargram And Paschim Medinipur Districts Including Supply, Installation And Commissioning Of Tools/Equipment/Instruments Etc. For Implementation Of Vocational Education In West Bengal- 1 Hot air oven 2 Seed drill 3 Sealing machine 4 Soil Auger 5 BOD incubator 6 Sowing machine 7 Soil testing kit 8 Sprayer 9 Compound Microscope 10 Pressure cooker 11 Wheel hoe 12 EC meter 13 Measuring tape 14 Sleeve trier/Nobbe trier 15 Heater 16 Hose pipe 17 Spade 18 Hand leveller 19 Watering can 20 Moisture box 21 Sickle 22 Sickle 23 Grinding machine 24 Germinator 25 Four stroke petrol engine with CNG setup- working condition 26 Power tiller 27 Diesel Engine – CRDI - 4 stroke for Dismantling and Assembling with Swiveling Stand. 28 Riffle type divider 29 Model Tractor 30 Processing / Oil extraction machine ( Soxhlet Apparatus) 31 Dibbler 32 Sprayer 33 General Balance 34 Soil testing kit 35 Foot Sprayer 36 Wheel hoe 37 Measuring tape 38 Pruning shear 39 Hose pipe 40 Heater 41 Forester’s shear 42 Hand fork 43 Spade 44 Hedge shear 45 Crow-bar 46 Grass shear 47 Hand leveler 48 Pruning saw 49 Axe 50 Hand cultivator 51 Drainage hoe 52 Pruning knife 53 Garden trowel 54 Watering can 55 Sickle 56 Digging fork 57 Garden hand rake 58 Kurpi-Varvari 59 Iron peg , Field board 60 Grinding machine ( turmeric powder and seed spices powder) 61 Aluminium oil extraction unit large ( for lemon grass & citronella) 62 Pouch sealing machine 63 Pilfer proof cap sealing machine 64 Hand refractometer 65 Weeder 66 Soil testing kit 67 Moisture meter 68 General Balance 69 Foot Sprayer 70 Salometer 71 Brix hydrometer 72 Electrically operated mixer cum grinder 73 Measuring tape 74 Knife Set 75 Heater 76 Hose pipe 77 Vegetable slicer, Potato slicer, Pineapple slicer 78 Spade 79 Hand leveler 80 Axe (Local made) 81 Pruning Secateur 82 Watering can 83 Fruit Tree Picking Pole with Basket 84 Sickle 85 Pulper 86 Cabinet dryer 87 Crusher 88 Autoclave (Laboratory type) 89 Spiral or screw type juice extractor. 90 Can sealer or double seamer 91 Water distillation unit 92 Wheelbarrow 93 Can vacuum testing gauge 94 Hand operated metal grinder 95 Washing machine 96 AC Motor Trainer Kit 97 Mixer cum grinder 98 Soldering & De-soldering Station 99 Megger 100 Geyser 101 ½ HP Induction motor Three Phase 102 Wooden Panel board with following accessories 103 Electric Power Drill 104 Clamp On Meter 105 Vacuum cleaner 106 Multimeter 107 ¼ HP Induction motor Single Phase 108 TPIC with Neutral main switch 109 Hand Drill Machine Electric with Hammer Action 110 Single phase Energy meter 111 Sodium vapour lamp 112 Mercury vapour lamp 113 Steam iron automatic 114 Electric rice cooker 115 DOL starter 116 Adjustable wrench 117 Screw driver set 118 M.C.B 119 Bench Vice 120 Wooden Board for wiring 121 Insulated Combination Plier (Heavy Duty ) 122 DPIC main switch 123 Spanner set 124 Cable cutting pliers 125 Analog multi-meter 126 DOL starter 127 Cutting pliers 128 Tools maker vice 129 Soldering iron 130 Crimping tool(pliers) 131 Ring Spanner 132 Screw driver set 133 Precision set of screwdrivers 134 M.C.B 135 Adjustable wrench 136 Hacksaw frame adjustable 137 De-soldering pump electrical heated, manual operators 138 Insulated combination pliers 139 Insulated side cutting pliers 140 Insulated screw driver 141 Insulated Combination Plier (Heavy Duty ) 142 Earthing rod with chain, Fish Wire 143 Electric bell 144 File flat second cut 145 Distribution box 4-way 146 File flat bastard 147 Handsaw 450mm 148 Soldering Iron Changeable bits 149 Ball Pin Hammer 150 Spirit level 151 3-pin 16A wall socket, flush type 152 Plier-Flat Nose 153 File flat smooth 154 3-pin 16A wall socket, mounting type 155 Ceiling rose 6A, 250V 2plate 156 Chisel-Cold-Flat 157 Fuse 158 Hammer ball pen 159 Fan regulator 160 3-pin 6A wall socket, flush type 161 Continuity tester 162 Hacksaw with frame adjustable 163 Wooden saw 164 Combined LED or fluorescent tube 165 Fuse 166 Standard wire gauge 167 I.C.T.P. switch16A 400V 168 S.P. switch 6A, 250 V mounting type two-way 169 S.P. switch flush type two way 170 3-pin 6A wall socket ,mounting type 171 2-pin 6A wall socket, flush type 172 I.C.D.P. switch16A250V 173 I.C. cut out 16A, 250V 174 Intermediate switch 6A, 250V 175 2-pin 6A mounting type 176 S.P. switch 6A, 250V mounting type single way 177 Kit-kat fuse 178 Kit-kat fuse 179 S.P. switch flush type, single way 180 3-pin16A 250V plug 181 Bell-Push/switch 6A, 250V mounting type 182 HRC Fuse-16A 183 PVC Cu wire 184 Terminal plate 16A 250 V3-way 185 Bell-Push / switch 6A, 250V flush type 186 GI junction box-1,2,3&4way square type 187 Bakelite pendent-holder 188 3-pin 6A 250V plug 189 Toggle switch 6A 190 Neutral link 16a mps 191 GI conduit pipe 192 PVC Channel 193 PVC pipe coupling 194 PVC junction box-1,2,3 and 4 way 195 PVC bend 196 PVC Elbow 197 PVC Tee 198 GI conduit coupler & Inspection Coupler 199 GI Elbow & Inspection Elbow 200 Tees & Inspection Tee 201 PVC Casing for wiring 202 PVC conduit pipe 203 Solar Photo-voltaic Cell : Solar power generation 204 Storage Battery 205 Complete set up of Single crystalline silicon PV Cell 206 Pyranometer 207 Solar street lighting 208 Solar home lighting system with all necessary components for student demonstration 209 Data logger 210 Concentrated solar collector 211 Flat type solar collector 212 Solar cooker 213 PVC / XLPE low tension cable jointing kit 214 D.C shunt Motor 215 Three phase Energy meter 216 Voltage Stabilizer 217 Room Heater 218 4-point starter 219 Tools makers vice 220 Tubular box spanner 221 Magneto spanner set 222 LED lamp 223 Allenkey set (Hexagonal set of 9) 224 Insulator model a) Pin type 225 Insulator model b) Strain type 226 Insulator model c) Disc type 227 Round Nose pliers 100mm 228 Round Nose pliers 2no. of set 229 Connecting screwdriver 100mm 230 Steel rule graduated both in Metric and English Unit 300mm 231 Long Nose pliers8 232 Micrometer 233 Steel measuring tape 3 meters 234 Hammer ball pen 500 grams 235 Neon tester 500V 236 PVC cable & XLPE cable 4 core, 3 & ½ core in m 237 Iron connector-5A, 250V 238 Digital compression testing machine 239 Theodolite transit latest model with all accessories 240 Aggregate impact tester with cylindrical cup and measuring cylinder 241 Auto level latest model with all accessories 242 Hand GPS-latest version 243 Mortar cube vibrator 244 Aggregate Crushing Value Apparatus 245 Concrete mixer 246 Dumpy level 247 Manual bar bending machine of suitable size 248 Bulk density apparatus (Cylindrical measure for fine aggregate and coarse aggregate ) 249 Turbidity Test Kit 250 Power cutter of suitable size 251 Box sextant 252 Planimeter Digital 253 Plane table with stand, accessories & water proofing Cover 254 Weighing plateform digital 255 Vicat apparatus with plunger, needles and mould 256 Standard IS sand 257 Oven Small Size 258 Electronic balance 259 Tile cutter 260 Bar bending table 261 Drill and bit set 262 Ratchet rack : with post and clamp flat 5 drill 6 to 35 mm by 0.2 mm. 263 Mortar board : 2000x2000 264 Metal cross staff- box type 265 Telescopic alidade 266 Slump test apparatus with temping rod 267 Water testing kit – for ph value 268 Thickness and length gauges (Elongation and Flakiness Index) 269 Plumbers metal melting pot 270 Metal cross staff- open type 271 Ratchet pipe die : 15 mm to 32 mm 272 Tap and die set to cut BSP Thread 273 Height indicators 274 Metric chain : 30 m & 20 m 275 Prismatic compass with stand and all accessories 276 Chain pipe wrenches : 90 mm-650 mm 277 Engineers chain 278 Sieve for sand in adjustable stand : 1mm, 100cm x 60cm fixed in steel frame 279 Optical square 280 Mortar board : 2 mtx2 mt. 281 Slump Cone 282 IS Brass sieves - set 283 Stillson pattern pipe wrenches : 450 mm to take pipe up to 52 mm dia. 284 Pipe vice to grip pipes up to : 77mm 285 Drawing Board : 1000mmx700mm 286 Brushes for painting 287 Leveling st-4M 288 Ranging rod Steel-2M 289 Offset rod : 2M 290 Measuring cylinder : set of 100 ml., 500 m., 1000 ml. 291 Pick axe 292 Pyconometer for specific gravity 293 Pickaxe. 294 Le Chatelier Mould (for soundness test of cement) 295 Survey plotting scale : 8 scales with offset scale in box 296 Mason square : 30x60 cm 297 Tenon saw, dovetail saw 298 Le Chateliers flask (For specific gravity test of cement) 299 Monkey Plier (gas pliers) 300 Aluminum float 301 Tool caulking 302 Flat Smithy tong. 303 Saw plumber : 300mm 304 Stop watch Digital 305 Screw driver Set 306 Land measuring steel tape 30 Meter long 307 Brick hammer with handle 308 Crow bar : 30mm dia. 1.5 m long of mild steel 309 Cube mould : 150mm Size 310 Spanner monkey up to 50 mm 311 Stilson wrench : 200 & 350 mm 312 Land measuring plastic tape : 30 mt long 313 Shovel 314 Spade 315 Telescopic pipes / props 316 Mason plumb rule with spirit Level 317 Trowel : 25 cmx10cm 318 Plumb rule and Bob 319 Non porous plate 320 Graduated cylinder 321 Adjustable spanner : A375 322 Double face hammers 323 Hacksaw frame adjustable : 250 to 300 mm 324 Level spirit wooden : 300mm 325 M.S pan : 45CM Dia. 326 Bucket G.i. : 35 CM Dia. 327 Sprit level : 30cm long 328 Bolster 329 Bevel 330 Wooden mallet 331 Gauging trowel 332 Sampling scoops : 2kg and 5 kg 333 Plumbers ladle 334 Trowel 125 335 Farma of mild steel for measuring aggregate : Heaving volume 0.03472 cm 336 Masonry grinder 337 Cutter, pipe wheel type : 6 mm to 25 mm 338 Caliper outside : 150mm 339 Steel tapes : 5 Meter long 340 Hammer ball peen : 800gms. 341 Cutting pliers 342 Inside caliper : 150mm 343 pointing Trowel : 6 344 Steel float 345 Measuring tape : 15 Meter long (Steel) 346 Bar bending lever (suitable diameter and length) : In m 347 Float wooden 348 Chisel : different sizes 349 Plumb bob : 50gms. 350 Bending pipes (suitable diameter and length) : In M 351 Line pin corner block 352 Wire brushes 353 Bending pipes : suitable dia& length in m 354 Total station latest model with all accessories 355 DGPS-latest version 356 Motorised sieve shaker 357 Floor polishing machine 358 Concrete vibrator : pin type & plate type 359 Electric drilling machine : 6 to 35 mm by 0.2 mm. for drilling 360 Power operated cutting machine 361 Vibrating machine : 12000 ± 400 rpm 362 Portable hand bender of suitable size 363 Spray painting machine 364 Drums : 200 liters capacity 365 Polishing machine 366 Abney level 367 Electric heater 368 Computing scales five hectares 369 Gunters chain 370 Offset scale for cadastral survey 371 Computing scales two hectares 372 Indian pattern clinometers 373 Telescopic/ adjustable spans 374 Straight edge 375 Steel / plywood shuttering plates 376 Hammer 5 kg 377 Water tube : 6m 378 Hammer 1 kg 379 Magnifying glass 380 Marking rope & thread : 15m 381 Chisel cold flat : 20 x 250 mm 382 File flat rough : 300mm 383 Four stroke petrol engine with CNG setup-working Condition 384 Diesel Engine – CRDI - 4 stroke for Dismantling and Assembling with Swiveling Stand. 385 Disk brake in working condition with caliper assembly with all parts 386 Drum brake assembly in Working Condition 387 Cut section working model of automatic transmission Gear box 388 Radiator cut section-cross flow 389 Cut section working model of Single plate clutch Assembly 390 Cut section of cross ply and radial tyres 391 Tyre pressure gauge with holding nipple 392 Vernier caliper : 0-300 mm with least count 0.02mm 393 Different type of piston model : 3 Different Types on board 394 Spanner, ring set of 12 : 6 to 32 mm. (metric) 395 Philips Screw Driver set of 5 pieces : 100 mm to 300 mm 396 Fuel feed pump for Diesel : Hand operated Plunger Type 397 Piston ring compressor 398 Piston Ring expander and remover. 399 Outside micrometer : 0-25mm 400 Automotive oil pump for dismantling and assembling 401 Valve Lifter 402 Carburetor – Solex : Solex for dismantling and assembling 403 Caliper inside with spring : 15cm 404 Calipers outside with spring : 15cm 405 Pliers combination : 20cm 406 Gasket Cutter : 5-35mm 407 Circlip pliers Expanding and contracting : 15cm 408 Dividers with spring : 15cm 409 Hammer Ball Peen : 0.75kg 410 Hammer Mallet 411 Hammer Plastic 412 Feeler gauge 20 blades (metric) 413 Hydraulic jack HI-LIFT type : 3 Ton Capacity 414 Two wheeler (refurbished) 415 Demonstration board of MPFI system : With injectors, rail, inlet manifold, throttle body, distributor, ECU, purge valve, sensor, crank pulley, fuel tank module. 416 Work bench : 250 x 120 x 60 cm with 4 vices 12cm Jaw 417 Torque wrenches set : 5-35 Nm, 12-68 Nm & 50-225 Nm 418 Battery –charger : Capable to charge batteries from 5AH – 150AH. 419 Battery –charger : Capable to charge batteries from 5AH – 150AH. 420 Spanners socket with speed handle, T-bar, ratchet and universal set of 28 pieces with box : up to 32 mm 421 Spanner D.E. set of 12 pieces : 6mm to 32mm 422 Steel tool box with lock and key (folding type) : 400x200x150 mm 423 Allen Key set of 12 pieces : 2mm to 14mm 424 Grease Gun 425 Electric Soldering Iron : 230 V 60 watts – 230 V 25 watts 426 Hacksaw frame adjustable : 20-30 cm 427 Hammer ball peen with handle : 0.5kg. 428 Electrician Screw Driver : 250mm 429 Flat File , second cut 25cm 430 File flat , bastard : 20cm 431 Hands file for Second cut flat : 20cm 432 Spanner, adjustable : 15cm 433 Scriber : 15cm 434 Test Jig box : PCB Jig Box, 220V, Dimension: 1.5x1x1 Feet 435 Different models of Water purifier, Microwave oven : set 436 Inverter set with stabilizer, battery charger, step down transformer : set. 437 Bonding machine 438 Different models of LED and LCD TV receiver 439 LCD Tester 440 SMD rework station 441 Soldering Station : Temp range: 200~480degC, Temp stability: +-2degC,Max power: 60W, Tip Compatibility: 900M Series, Inputvoltage: AC220V / 50 Hz 442 Battery tester : 2Ah-220Ah Internal Resistance Tester Accurate Digital Auto Battery Analyzer Digital Battery Tester 443 Bench power supply 444 Screwdriver set, tweezers, nose pliers, wire cutters etc. : in set. 445 PPM meter 446 Digital Multimeter (Black 2000 Counts) 447 SMD tester 448 Hot air gun 449 TDS meter 450 Soldering Iron : Soldering Iron 60W, Soldering Gun Solder Weld Welding Iron Tool 160-240 V 451 De soldering pump, 452 Dual CRO 30 MHz 453 Micro wave power meter 454 LED Magnifying Lamp, 220-240V 455 Electrical drill machine 456 BIOS programmer 457 Antistatic Mat (ESD Mat) : Electromark Esd Mat 6.5 X 2 Feet, Blue for static charge Dissipation 458 Hot air blower : 1500W Heat Gun cum Hot Air Blower with Dual Temperature Control 459 Back light Tester 460 Battery Booster : 12 volt dc adapter, 12V, Adapter, adaptor, battery booster 461 PTC heating element 462 Setter Hatcher Machine 463 Wt. Balance 464 Simple microscope 465 Chaff cutter 466 Vaccines as- RD, GD, IBD, Fowl Pox etc.Vaccinator, & First aid kit etc. 467 Rake, Fan, Litter material 468 Trevis/Crate 469 Milking machine 470 Sprayer 471 Poultry feeder, Drinker, water Heater 472 Postmortem set 473 Brooder, Brooder Guard & Hover 474 Mixer Grinder 475 veterinarians stethoscope 476 Thermometer 477 Haemometer 478 Setter Hatcher Machine 479 Aerator 480 Vaccines as- RD, GD, IBD, Fowl Pox etc. Vaccinator, & First aid kit etc.

Contract Date: Jan 16, 2026 Contract Value : ₹ 1.02 Crore

Government Departments No of Bidders 6

West Bengal View Result →

18.

Health and Family Welfare #10894980 AOC

Contract Date: May 06, 2026 Contract Value : ₹ 1.62 Crore

Government Departments No of Bidders 10

Haryana View Result →

19.

Public Administrative Department #10852137 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Trust & NGO No of Bidders 3

Maharashtra View Result →

20.

Educational and Research Institute #10851996 Price Bid

Tender for E-Tender For Supply, Installation & Commissioning Of Devices, Equipments, Instrument, Machineries, Tools Etc. For Mechanical, Electrical And Electronics Engineering Laboratories And Workshops At Kolaghat Government Polytechnic. , To Determine Illumination Of A Surface For A Drawing Room By Means Of Lux Meter. , To Determine Candle Power Of A Lamp In Comparison To Standard C.P. Of Lamp By Optical Bench Method. , To Verify The Inverse Square Law And Compare The Difference In Output Luminescence Of Incandescent, Fluorescent And Compact Fluorescent Lamps. , To Study Of Sodium Vapour Lamp, Mercury Vapour Lamp, Cfl With Their Connections And The Technical Specification. , Trainer Kit Dc Series Motor, Brake Drum & Pulley,Spring Balance , Weights, Tachometer, Ammeter, Voltmeter, Multimeter, Clampmeter, Rheostat , Electrical Load Box, Dc Gen, Braking Setup , Electric annual rate contract Welding Setup , Trainer Kit Setup Of Induction Heater , Experiment To Compare Power Consumption Of Different Types Of Tl With Electromagnetic Ballast, Electronic Ballast And Led Lamps By Direct Measurements And Estimate Energy Saving. , Experiment To Determine The Reduction In Power Consumption In Star Mode Operation Of Induction Motor Compared To Delta Mode At Different Load Conditions. , Experiment To Estimate Energy Saving By Improving Power Factor Using Pfc/Apfc For An Electrical Load. , Experiment To Estimate Energy Saving By Improving Load Factor For An Establishment. , Perform Experiment To Determine The Reduction In Power Consumption By Replacement Of Fans And Regulators In A Class Room / Laboratory , Prepare Series Testing Board For Testing Fan Or Other Electrical Gadgets. , Select The Electric Wire Using Measuring And Testing Instruments For Particular Applications. , Study And Identify Cables (Pvc, Xlpe, And Vir) And Catenary Cable Of Different Current Rating. , Prepare Wiring Installation On A Board From The Commencement Of Supply Showing Energy Meter, Mcb, Control Of One Lamp, One Fan And One Socket From One Switch Board In Pvc Surface Conduit Wiring System. , Prepare Wiring Installation On A Board Showing Control Of One Lamp, One Fan And One Socket From One Switch Board Using Batton Wiring System. , Control One Lamp From Two Different Places Using Pvc Surface Conduit Wiring System. , Test Wiring Insulation Using Megger. , Measure Earth Resistance Using Earth Megger , Measurement Of Three Phase Energy Using Static Energy Meter Which Can Show Maximum Demand, Reactive Power, Tod In Addition To Active Power. , Measurement Of Energy Using Ct And Pt , Perform Experiment To Measure Solar Radiation Using Pyranometer On Tilted Surface At Different Angles Of Inclination And Plot Radiation Vs. Time Characteristics For Certain Duration. , Perform Experiment To Plot I-V Characteristics Of Photovoltaic Cell Module And Find Out The Solar Cell Parameters (O.C. Voltage, Short Circuit Current, Voltage-Current-Power At Maximum Power Point, Fill Factor, Efficiency). , Identify & Study The Specified Components Of A 0.3 Kw Small Wind Turbine (Swt) System. (Indoor Type). , Set Up The Solar Pv Plant To Produce Electricity. , Display Board Of Samples Of Overhead Conductors, Underground Cables , Samples Of Transmission Line Insulators. , Demonstrate Various System Faults By D.C. Network Analyzer , Measurement Of Three-Phase Line And Phase Voltage And Measurement Of Three-Phase Power By Two Wattmeter Method , Inductance Measurement By Andersons Bridge Trainer Kit. , Multimeter , Clamp Meter , Stop Watch , Distance Meter

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

West Bengal View Result →

21.

Heavy Industries and Public Enterprises #10834084 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Private Organizations No of Bidders 3

Kerala View Result →

22.

Information and Broadcasting #10811892 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Tamil Nadu View Result →

23.

Drinking Water Supply and Sanitation #10811788 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Odisha View Result →

24.

Power #10746293 Price Bid

Tender For Increasing Capacity 33 / 11Kv Sub Station Ujhani Town And Its 11 Kv Link Line In District Budaun-2 Part ( A ) - Increasing Capacity 3 Loading, Unloading And Safe Carriage Of The Following Materials From Any Electy. Store Center Of Electricity Store Division Of Bareilly Zone. 4 M.S. Channel 125X65mm 5 M.S.Angle 75X75x8mm 6 Ms Angles 50X50x6mm 7 33 Kv Lightening Arrestor 8 33 Kv 400 A Bus Isolator 9 33 Kv Vcb 800A 750 Mva 10 Control Pannel I / C For 33 Kv Single T / F 11 33 Kv O / D Ct Ctr 200 / 100 / 1 12 11 Kv Vcb I / C Ctr 600 / 300 / 5A 250 Mva 630 A 13 11 Kv Vcb O / Gctr 200 / 100 / 5A 350 Mva 14 11 Kv Cable 3X300 Sq. Mm Xlpe 15 11 Kv Cables 3X185 Sq. Mm Xlpe 16 11 Kv Cable Jointing Kit 17 Pcc Pole 8.5Mtr. Long 18 M.S.Channel 100X50x2240mm @ 9.6Kg / Mt. ( Top Channel & Dropper ) 19 M.S Angle Lron 65X65x6mm, 4300Mm Long @ 5.8 Kg / Mt ( Bracing ) 20 11Kv Disc Insulator 45Kn 21 Disc Fittings Dog / Racoon 45 Kn 22 Earthing Complete 23 Stay Set 16X1800 Mm Complete 24 Acsr Dog Conductor 25 Earthing Of Indoor & Outdoor Equipments Of Sub-Station After Proper Welding Of Joints And Painting Of Earth Strip Above Soil With Proper Clamp Etc. As Per Respo Approved Drawing & Resistance Of Earthing Should Be Not More Than 2O As Per As Per Details Given Below. Firm Have To Submitted Jointly Signed Resistance Testing Certificate Of Earthing. 26 Making Of Triangular Bridge By Using 32 Mm Ms Round Bar Electrode, Gi Strip 50X6mm And Gi Pipe 50 Mm Dia With Providing Of Well Type Pipe Earthing Upto 20 Mtr. Depth Below Ground Level Including Welding Etc. By Boaring Process At T / F Neutral And T / F Body Including Cost Of Gi Pipe Of Size 40 Mm Dia 15 Mtr. Long Of Isi Mark ( All The Required Material Will Be Supplied By The Contractor And Dully Checked By Ae ( Works ) . 27 Supply Of Gi Strip Of Size 50X6mm For Earthing Of All Newly Erected Structures And Equipments In Switchyard Including Cutting, Fixing & Proper Welding With Equipments. All La Will Be Seprately Earth Also As Per Respo Norms. ( All The Required Materials Will Be Provided By Firm And Will Be Inspected By Ae ( Works ) Before Installation. ) 28 Fabracation, Erection And Grouting Of The Following Structures As Per Resspo / Approved Drawing And Its, Plinth 30Cm Above Ground Leval As Directed By The Engineer Incharge ( All Steel Sections Will Be Provided By Deptt ) . 29 33 Kv Bus Isolator Structure 30 Lightening Arrestor Structure 31 33 Kv Vcb Structure 32 33 Kv Ct Structure 33 Fuse Set Structure 34 Post Insulator Structure 35 Installation Of Followig Equipments On Their Respective Structures Including Mechanical & Electrical Fixing After Proper Adjustment On Their Structure. 36 33 Kv Bus Side Isolator 37 Lightening Arrestor 38 33 Kv Vcb Complete 39 33 Kv Ct ( 03 Nos ) 40 33 Kv Fuse Set ( Will Be Provided By Firm ) 41 33 Kv Post Insulator ( Will Be Provided By Firm. ) 42 24 V Battery Set With Charger ( To Be Provided By Firm I.S.I. Mark Only Of Dc System With One Float Cum Boost Charger & Battery Set For 24V. System With 200A.H. Capacity With Cabinet ) . Including 3 Year Guarantee. 43 Complete Laying And Termination Of Copper Control Cables ( Fire Resistance ) From 5 Mva Power T / F, 33 Kv Vcb, 33 Kv Ct In The Out Door Switch Yard To The Transformer Relay Control Panel Inside The Control Room Including Cost Of All Materials And Labour Required For Proper Completion Of Works As Per Resspo Drawings, Including Cost Of Testing Of Transformer, Vcb, Ct, Relay Pannel & Proper Relay Settings As Per Requirement Etc. 44 Laying Of Dog Conductor Alongwith Cost Of All Required Calmps And Connectors Etc. As Per Resspo Approved Drawing Of L.A., C.T., V.C.B., Bus Isolator Etc. 45 Erection And Grouting Of Double Pole Structure Of Pcc Poles Including Stays For 11Kv Out Door Feeders, Complete In All Respect As Per Resspo Drawing Along With Grouting Material About 3 Meter 4 Dia G.I. Pipe Along With Required Elbow Shall Be Provided At D / P For Power Cable Including Provision Of 02 Nos. Feeders Name Plate On D / P. ( All Type Of Insulators, Steel, Stay Set With Wire, Earthing Rod, Clamps, Gi Pipe & Grouting Material Provided By The Firm Except Pcc Pole ) . 46 Making Of M.S. Angle Ladder Type Frame Of Angle ( 75X75x8mm ) & Gi Strip ( 50X6mm ) Near Power Transformer For Power Cable With Concreting Of The Same In The Ground And Proper Clamping ( 50X6mm ) Of The Same With Transformer Cable. 47 Making Of M.S. Angleframe Of ( 75X75x8mm ) In L Shape To Connect T / F Neutral By Flexible Copper Strip Including Cost Of Copper Strip & Will Be Connected To Newly Constructed Well Type Earthing For Power T / F Neutral As Per Respo Norms. 48 Laying Of 11Kv Cable Of Different Size From Power T / F To Control Room I / C And Control Room To Outside D / P. 11 Kv Cable Will Be Layed In Brick Trench Constructed Below 750Mm To The Ground Level Over The Ganga Sand. Brick Trench Will Be Constructed By Ist Class Bricks Covering Three Sides Of Cable, After Laying 11 Kv Cable Brick Trench Will Be Filed By Ganga Sand & Then Will Be Covered By Bricks & Backfill Of Soil Over Cable Trench As Per Respo Norms. 49 Erection Of 11 Kv Incoming And Outgoing Panel ( With Testing & Setting Of Relays ) In Substation Control Room Including Grouting Of Anchor Bolts Of Panel And Making Of Pocket For Power Cable To Insert In Panel From Trench And Complete Filling Of Control RoomS Tranches By River Sand. 50 Erection & Testing Of 1 No. Single T / F Control Panel In Substation Control Room Including Grouting Of Anchor Bolts Of Panel And Making Of Pocket For Control Cable To Insert In Panel From Trench And Complete Filling Of Control RoomS Tranches By River Sand. 51 Termination Of 11 Kv 3X300sqmm Size Xlpe Cable By Filling 11 Kv Heat Shrinkable Type Cable Boxes Including Proper Connection With Lv Side Of Transformer To Switch Gear Panelsby Providing Suitable Connectors. 52 Termination Of 11 Kv 3X185sqmm Size Xlpe Cable By Filling 11 Kv Heat Shrinkable Type Cable Boxes Including Proper Connection With Lv Side Of Switch Gear Panels To Double Poles Out Side S / S By Providing Suitable Connectors. 53 Hoisting Of 11 Kv Cable On Dp In Gi Pipe. 54 Painting Of The Fabicated Structures With One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Alumm. Paint / Green Paint Of Isi Mark Alongwith Earthing Strip Above Ground Level. 55 Shifting And Dragging Of 33 / 11 Kv 5 Mva Transformer From Road Side To Its Plinth Alongwith Its Erection Including Fixing Of All Assessories And Top-Up Of T / F Oil. 56 Repairing And Replacement Of Damage Gasket, Bushing Rod, Bushing .Breather, Silica Gel Etc By Repalcement. ( In Case Of Old & Used 5 Mva T / F ) 57 Centrifusing Of Transformer Oil In Case Of Old & Used Power Transformer. 58 Providing Of Rubber Matting Sheet 8 / 10Mm Of Good Quality As Per Standard Specification. 59 Comlete Repairnig Of Swichyard Fencing. 60 Part ( B ) - 11 Kv Line 61 Carriage Of Following Line Material For 11Kv Line From Store Centre To The Site Of Work Including Measuring, Weighing, Loading, Unloading At Both Ends And Proper Stacking At Safe Site 62 Stp 11Mtr. Long 63 11 Kv Cross Arm Channel V Type 64 11 Kv Pin Insulator 65 11 Kv Pin With Nut 66 11 Kv Disc Insulator 67 11 Kv Disc Fitting 68 Acsr Raccon Conductor 69 G.I. Wire 8 Swg 70 Stay Set Complete 71 Earthing Complete 72 Lt Xlpe Cable1x240 Mm 73 11 Kv 3X185mm Xlpe Cable 74 11 Kv 3X185mm Xlpe Cable Jointing Kit O / D 75 11 Kv 3X185mm Xlpe Cable Jointing Kit S / Through 76 Gaurding Angle 1.6Mtr. Long 77 M.S Angle Lron 65X65x6mm, 4300Mm Long @ 5.8 Kg / Mt ( Bracing ) 78 M.S.Channel 100X50x2240mm @ 9.6Kg / Mt. ( Top Channel & Dropper ) 79 F- Bracket With Bolt & Nut 80 Cross Arm Holding Clamp 81 Ms Channel 125X65x1300mm Tee Off 82 Erection Of The Following Supports Including Cutting, Making Holes, Fixing Of All Types Of Accessories Digging Of Pits Complete In All Respect, As Per Resspo Drawing. All Types Of Clamps, Nut, Bolt Washers And Stone Pad Would Be Provided By The Contractor. 83 Single Support Of S.T Pole 11 Mtr Long. 84 Double Pole Structure On S.T. Pole 11Mtr Long Complete With Bracing. 85 End Type Double Pole Structure On S.T. Pole 11Mtr Long Complete With Bracing. 86 Cable Exposer Double Pole Structure On S.T. Pole 11Mtr Long Complete With Bracing. 87 Concreting Of Supports At The Time Of Erection Of Pole In 1:4:8 Concrete Ratio From Bottom Of Pole To Ground Leveland Plinthing Of Supports Upto 300Mm Above Ground Level By Using Cement, Sand & Coarse Aggregate In Ratio 1:4:8 As Per Resspo Drawing With Watering / Curing Properly Upto Proper Setting Of Plinthing. All Matrial Would Be Provided By The Contractor. 88 Erection Of Stay Set With Stay Wire, Stay Clamp & Stay Insulator Including With Grouting Of Stay Set By Concrete Of Ratio 1:4:8 As Per Resspo Norms Before Back Fitting Of The Pits Including Binding, Climbing, Clamping, Tightening And Nozzeling Of Stay Wire In All Respect As Per Resspo Norms. All Clamps, Nuts, Bolts, Stay Insulator, Cement. Brick, Ballast, Sand Etc Would Be Provided By The Contractor. 89 Laying And Sagging Of 3 Phase Acsr Raccon Conductor From Double Pole At 33 / 11 Kv Substation To Double Pole At Tapping Point Of 11 Kv Feeder Line Including Jumpering, Hoisting, Fixing Of All Type Of Insulators, Binding, Jointing And Its Clamping Etcin All Respect. 90 Earthing Of Each S.T Poles Of The Line Is To Be Done By Inserting The Ms Earth Rod ( 1800X20mm ) Into Soil By Hammering And Properly Fastning With Gi Wire To Each Support By Nut & Bolt. Earthing Rod Must Be 0.15Mtr.Above From The Plinth Of The Support. All Type Nut & Bolt Would Be Given By The Contractor. 91 Guarding Of Ht / Lt / Telephone Line / Road / River Crossing Etc. By Providing G.S Earth Wire 7 / 16 Swg / Gi Wire No. 8 / 10 And Making Net With Difference Of 1.00 Mtr. Completely Including Fixing Of Channel / Angle Etc. With Proper Locking At Each Support As Per Resspo Norms. All Type Nut &Bolts, Would Be Given By The Contractor. 92 Fixing Of Danger Board And G.I Barbed Wire On Each Pole Including Proper Clamping. All Material Would Be Provided By Firm. 93 Write Serial Number On Each Pole In English With Black Paint In Yellow Paint Background. All Material Would Be Provided Be Firm. 94 Laying Ofdouble Circuit 11 Kv 3X185 Sq. Mm Xlpecable In Normal Soil By Digging Of Trench 1250 Mm Deep, 750 Mm Wide Including Supply Of Required Material As Fine Sand, 1St Class Bricks, Stone Slab. Interaxial Spacing Between The Two Cable Should Be In Between 0.25 M To 0.40M. The Two Cables Should Be Seprated By A Partition Of Single Bricks ( All Thematerial Required For Laying Will Be Supplied By Thecontractor Except 11 Kv Xlpe Cable ) 95 Cable Laying By Drill Method In Single Circuit 96 Hoisting Of 11 Kv 3X185 Sq. Mm. Xlpe Cable On Double Pole In Gi Pipe Including Its Jumpering Complete Along With Cost Of A Class Gi Pipe Of Size 6 Dia 3 M Long, Clamps, Nuts And Bolts. 97 Fixing Of 11 Kv 3X185sqmm O / D & S / Th. 98 Painting Of Following Support Of Existing 11 Kv Line With One Coat Of Red Oxide Primer And Two Coats Of Aluminium White Paint Of Isi Mark And Top Danger Portion Of Each Support Must Be Painted By Providing Two Coat Of Post Office Red Paint ( 1.5Mtr Upper Portion Of Support. ) Paint And Material Would Be Given By Contractor To Complete Of Work. 99 Single Pole Structure Of 11 Mtr. St Pole. 100 Double Pole Structure Of 11 Mtr. St Pole. 101 Clearing Of The Line Route By Cutting Of Tree Branches During Erection Of Line And Also Upto The Time Of Energisation Completely As Per Direction Of Site Incharge.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Uttar Pradesh View Result →

25.

Housing Urban and Rular Development #10707908 Price Bid

Zonal Tender For Various Sanctioned Civil Zonal Tender For Various Sanctioned Civil Electrical Work Under Piu 2 Pwd Bhopal District Bhopal LIST OF EQUIPMENTS/ MACHINES FOR QUALITY CONTROL LABS FOR BUILDING WORKS IN PIU COSTING UPTO RS. 10 CRORES S. No. Minimum Requirement Qty. Available with the Bidder Name of Quality Control Equipments/ Machine Qty. 1 Balances i. 7 kg to 10 kg Capacity, Semi Self indicating type, Accuracy 10 gm. ii. 500 gm. Capacity, Semi Self indicating type, Accuracy 1gm. iii. Pan Balance - 5 kg. Capacity, Accuracy 10gm. 1 Set 2. Ovens- Electrically operated thermostandically controlled upto 1100C. Sensitivity 10C. 1 Set 3. Sieves : As per IS 460- 1962 i. IS Sieves- 450 mm internal dia of sizes 100mm , 80 mm, 63mm, 50mm, 40mm, 25mm, 20mm, 12.5mm, 10mm, 6.3mm, 4.75mm complete with lid and pan. ii. IS Sieves- 200 mm internal dia (brass frame) consisting of 2.36mm, 118mm, 600microns, 425 microns, 300microns, 212 microns, 150 microns, 90 microns, 75 microns with lid and pan. 1 Set 4 Sieve shaker capable of 200 mm and 300 mm dia sieves manually operated with timing switch assembly. 1 Set 5 Equipment for slump test slump cone, steel plate tamping rod, steel scale, scoop. 1 Set 6 Dial gauges 25mm travel- 0.01 mm/ division least count - 2Nos. 1 Set 7 100 tones compression testing machine, electrical cum manually operated. 1 Set 8 Graduated measuring cylinders 200 ml capacity- 3 Nos. 1 Set 9 Enamel trays ( for efforescene test for bricks) i. 300mmx250mmx40mm-2Nos. ii. Circular plates of 250 mm dia - 4 Nos

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Madhya Pradesh View Result →

26.

Defence #10694380 Price Bid

Tender For Construction Of 03 Nos Bore Well At Nsg Campus Manesar Gurgaon ( Haryana ) .; 1 Earth Work 2 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. 3 All Kinds Of Soil. 4 Cement Concrete ( Cast In Situ ) 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 6 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 10 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources ) 7 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For : 8 Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth And String Courses Fillets, Kerbs And Steps Etc. 9 Reinforced Cement Concrete 10 Reinforced Cement Concrete Work In Walls ( Any Thickness ) , Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 11 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natu- Ral Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 12 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) . 13 Providing And Fixing Tie Bolt, Spring Coil And Plastic Cone In Wall Shuttering Complete As Per The Direction Of Engineer-In-Charge. 14 20 Mm Dia.& 225 Mm Length 15 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. 16 Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 17 Flooring 18 52 Mm Thick Cement Concrete Flooring With Concrete Hardener Topping, Under Layer 40 Mm Thick Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Top Layer 12 Mm Thick Cement Hardener Consisting Of Mix 1:2 ( 1 Cement Hardener Mix : 2 Graded Stone Aggregate 6 Mm Nominal Size ) By Volume, Hardening Compound Mixed @ 2 Litre Per 50 Kg Of Cement Or As Per ManufacturerS Specifications. This Includes Cost Of Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 19 Finishing 20 6 Mm Cement Plaster Of Mix : 21 1:3 ( 1 Cement : 3 Fine Sand ) 22 Water Supply 23 Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. External Work 24 65 Mm Dia Nominal Bore 25 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) : 26 25 Mm Nominal Bore 27 Painting G.I. Pipes And Fittings With Two Coats Of Anti-Corrosive Bitumastic Paint Of Approved Quality : 28 65 Mm Diameter Pipe 29 Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) : 30 65 Mm Nominal Bore 31 Providing Push-On-Joints To Centrifugally ( Spun ) Cast Iron Pipes Or Ductile Iron Pipes Including Testing Of Joints And The Cost Of Rubber Gasket : 32 100 Mm Dia Pipes 33 Drainage 34 Providing M.S. Foot Rests Including Fixing In Manholes With 20X20x10 Cm Cement Concrete Blocks 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) As Per Standard Design : 35 With 20X20 Mm Square Bar 36 Supplying And Fixing C.I. Cover Without Frame For Manholes : 37 455X610 Mm Rectangular C.I. Cover ( Light Duty ) The Weight Of The Cover To Be Not Less Than 23 Kg 38 Rain Water Harvesting & Tubewells 39 Boring / Drilling Bore Well Of Required Dia For Casing / Strainer Pipe, By Suitable Method Prescribed In Is: 2800 ( Part I ) , Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart / Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer-In-Charge, Upto 90 Metre Depth Below Ground Level. 40 All Types Of Soil 41 300 Mm Dia 42 Rocky Strata Including Boulders 43 300 Mm Dia 44 Boring / Drilling Bore Well Of Required Dia For Casing / Strainer Pipe, By Suitable Method Prescribed In Is: 2800 ( Part I ) , Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart / Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer -In-Charge, Beyond 90 Metre & Upto 150 Metre Depth Below Ground Level. 45 Rocky Strata Including Boulders 46 300 Mm Dia 47 Gravel Packing In Tubewell Construction In Accordance With Is: 4097, Including Providing Gravel Fine / Medium / Coarse, In Required Grading & Sizes As Per Actual Requirement, All Complete As Per Direction Of Engineer-In-Charge. 48 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Erw ( Electric Resistance Welded ) Fe 410 Mild Steel Screwed And Socketed / Plain Ended Casing Pipes Of Required Dia, Conforming To Is: 4270, Of Reputed & Approved Make, Including Painted With Outside Surface With Two Coats Of Anticorrosive Paint Of Approved Brand And Manufacture, Including Required Hire & Labour Charges, Fittings & Accessories, All Complete, For All Depths, As Per Direction Of Engineer-In-Charge. 49 200 Mm Nominal Size Dia Having Minimum Wall Thickness 5.40 Mm 50 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Erw ( Electric Resistance Welded ) Fe 410 Plain Slotted ( Having Slot Of Size 1.6 / 3.2 Mm ) Mild Steel Threaded And Socketed / Plain Bevel Ended Pipe ( Type A ) Of Required Dia, Conforming To Is: 8110, Of Reputed And Approved Make, Having Wall Thickness Not Less Than 5.40 Mm, Including Painted With Outside Surface With Two Coats Of Anticorrosive Bitumestic Paint Of Approved Brand And Manufacture, Including Hire & Labour Charges, Fittings & Accessories, All Complete, For All Depths, As Per Direction Of Engineer -In-Charge. 51 150 Mm Nominal Size Dia 52 200 Mm Nominal Size Dia 53 Development Of Tube Well In Accordance With Is : 2800 ( Part I ) And Is: 11189, To Establish Maximum Rate Of Usable Water Yield Without Sand Content ( Beyond Permissible Limit ) , With Required Capacity Air Compressor, Running The Compressor For Required Time Till Well Is Fully Developed, Measuring Yield Of Well By V Notch Method Or Any Other Approved Method, Measuring Static Level & Draw Down Etc. By Step Draw Down Method, Collecting Water Samples & Getting Tested In Approved Laboratory, I / C Disinfection Of Tubewell, All Complete, Including Hire & Labour Charges Of Air Compressor, Tools & Accessories Etc., All As Per Requirement And Direction Of Engineer-In-Charge. 54 Providing And Fixing M.S. Clamp Of Required Dia To The Top Of Casing / Housing Pipe Of Tubewell As Per Is: 2800 ( Part I ) , Including Necessary Bolts & Nuts Of Required Size Complete. 55 200 Mm Clamp 56 Providing And Fixing Bail Plug / Bottom Plug Of Required Dia To The Bottom Of Pipe Assembly Of Tubewell As Per Is:2800 ( Part I ) . 57 150 Mm Dia 58 Mr Items 59 Charges For Conducting Geophysical Surface Resistivity Investigation For Tubewell Site Selection To Find Out Thickness Of Alluvial, Protential Zones, Water Quality Variation With Depth & Type Of Rig To Be Deployed. 60 Electrical 61 Supplying, Installation, Testing And Commissioning Of Multi Stage Submersible Pump Set, In Bore Well Complete Withcoupled Totally Enclosed Electric Motor Suitable For 415 Volt, 50 Hz, 3 Phase A. C. Supplyincluding Water Proof Jointing Of Cables. ( Excluding Lowering Charges, Lowering Charges Of Submersible Pumpset Included In The Item Lowering Of Column Pipe ) ( Horse Power Of The Motor , Stage , Lpm & Head Of The Submersible Pump Will Be Decided By Engg In Charge On Basis Of Yield Report Submitted By The Contractor ) 62 Providing And Loweringgi Pipes Class B Marked With Is: 1239 In 6 M Length, Including Threading And Welding With Flanges ( Heavy Duty ) On Both Sides, Jointing With Nuts And Bolts, Rubber Gaskets, Into Tube Wells And Testing Commissioing Etc. Complete In All Respects To The Satisfaction Of Engineer-In- Charge. ( Make :Isi Marked B Class Jindal Hisar / Tata / Prakash Surya / Swastik / Zenith Maked G.I. Pipe ) 63 50Mm Dia 64 65Mm Dia 65 Supplying And Laying Of One Numberflat Copper Conductor Submersible Cable Of Following Size Pvc Insulated And Pvc Sheathed Flat Copper Submersible Cable Of 1.1 Kv Grade Along Thelength Of Coloum / Delivery Pipe / In The Existing Masonry Open Duct / Along Wall Surface / Cable Tray / Loose For Connections / In Existing Pvc Casing / Capping Etc. As Required. ( Isi Marked Make Havells / Polycab / Finolex / Rr Kabel ) 66 3 X 4.0 Sqmm 67 Supplying & Fixing Nylon Rope 16Mm Dia Complete With Shackles For Fixing Of Pump Set During The Lowering Of Pumpset To Avoid Slippage Complete As Reqd . 68 Providing And Fixing Three Phasesubmersible Pump Controllers With Single Phase Preventer Submersible Motormodel Mug15fasd Make L&T Suitable Relay Rangeor Equivalent In Havells & Siemens In Existing Cubicle Panel Board Making Connections, Etc. As Required. ( Relay Range & Horse Power Of The Starterwill Be Decided By Engg In Charge On Basis Of Submersible Motor Capacity ) 69 Supply, Installation, Testing And Commissioning Of Outdoor Type Totally Enclosed, Dust And Vermin Proof, Pedestal Mounted Inspection Box / Junction Box Of A Suitable Size But Not Less Than 600 Mm Wide X 450 Mm Height X 450 Mm ( Deep ) Fabricated From 2 Mm Thick Crca Sheet Steel Having Front And Back Openable Doors With Locking Arrangement On Both Sides, Tapered Top ( Roof ) , Including Detachable Cable Gland Plate Made Of 3 Mm Thick Crca Sheet, Including Pre-Paint Treatment, Phosphating And Powder Coating By Approved Siemens Grey Paint, Earthing Stud, Danger Notice Plate Fixed, Complete As Required. The Feeder Pillar Should Be Complete With A Mounting Frame Made Of 50 Mm X 50 Mm X 6 Mm Angle Iron With 900 Mm Long Legs. The 4 Legs Of The Feeder Pillar Shall Be Erected On A Suitable Size 1:3:6 Cement Concrete ( 1:3:6 Cement; 3 Sand; 6 Graded Stones Of 20 Mm Size ) Pedestal Having 900Mm Of Depth ( 600Mm Below Ground & 300Mm Above Ground ) . 70 Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal / Coke And Salt As Required. 71 Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 72 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required. 73 Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 74 90 Mm Dia ( Od-90 Mm & Id-76 Mm Nominal ) 75 Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.Direct In Ground ( 75 Cm Below Ground Level ) In The Existing Trench Complete As Required. 76 90 Mm Dia ( Od-90 Mm & Id-76 Mm Nominal ) 77 The Road Crossings Of Power Cablethrough Trenchless Boring.Trenchless Boring Using Manual / Machine Moling Techniqueat 0.75 Metre Below The Ground Level For Following Size Pipes, Including Survey Of Under Ground Utilities, Excavation Of Pits, Moling With The Hole Size Not Exceeding 20% Of The Pipe Dia, Backfilling, Compaction And Restoration Of The Pits To Original Condition Etc. As Required.The Rates For Moling, As Indicated Are Inclusive Of Excavation Of Pits, Backfilling, Compaction Andrestoration Of The Pits To Original Condition. Any Damages Occurred To Other Utilities During The Moling Operation Shall Be Immediately Notified And Rectified By The Contractor Without Any Cost Implication To The Department. The Length Of The Hole ( Excluding The Sizes Of The Pits On Both Ends ) Shall Be Considered For The Measurement Of Moling Length. However, Intermediate Pits Will Consider In The Moling Length.I ) Upto 150 Mm Dia Dwc Hdpe / G.I. / Pvc 78 Supplying And Laying Of One Number Aluminium Conductor, Xlpe Insulated, Pvc Sheathed, Armoured Power Cable Of 1.1 Kv Grade , Confirming To Is : 7098 ( Part-1 ) 1988 Of Following Size In The Existing Rcc / Hume / Metal Pipe As Required. 79 3.5 X 35 Sq. Mm 80 Supplying And Laying Of One Number Aluminium Conductor, Xlpe Insulated, Pvc Sheathed, Armoured Power Cable Of 1.1 Kv Grade , Confirming To Is : 7098 ( Part-1 ) 1988 Of Following Size Direct In Ground Including Excavation And Refilling The Trench Etc As Required, But Excluding Sand Cushioning And Protective Covering. 81 3.5 X 35 Sq. Mm 82 Supplying And Laying Of One Number Aluminium Conductor, Xlpe Insulated, Pvc Sheathed, Armoured Power Cable Of 1.1 Kv Grade , Confirming To Is : 7098 ( Part-1 ) 1988 Of Following Size In The Existing Masonry Open Duct / Along Pole / Loose For Connections Etc As Required. 83 3.5 X 35 Sq. Mm 84 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required 85 3.5 X 35 Sq. Mm 86 Supplying And Making Cable Route Marker With Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Of Size 60 Cm X 60 Cm At The Bottom And 50 Cm X 50 Cm At The Top With A Thickness Of 10Cm Including Inscription Duly Engraved As Required. 87 Add 1.0633 Multiplying Factor For Gst On Dsr

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Haryana View Result →

27.

Health and Family Welfare #10690140 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Haryana View Result →

28.

Educational and Research Institute #10680797 Price Bid

supply of tool machinery goods- 1 Connecting screw driver 2 Neon tester 3 Insulated combination pliers 4 Electrician knife 5 Soldering Iron Changeable bits 6 De- soldering pump 7 Soldering Iron 8 Optical Drives 9 Post error debugging card 10 PCI slot Testing tool 11 Network Management Software 12 Wireless Network Adapter 13 Router 14 LAN Cards 15 WI-FI LAN Card 16 Power Meter 17 Media Convertor 18 24 port UTP jack panel 19 NVR 20 POE adapters kit 21 IP Camera Outdoor 22 Analog camera with dvr 23 SMPS 24 Blu-Ray driveand player Dell/ hp/ toshiba 25 Digital Camera 26 Network storage 27 Card Reader 28 SMPS Trainer kit 29 Foot rule steel tape 30 Steel Measuring Scale 31 MARKING KNIFE 32 Try Square 33 Bevel Square 34 Carpenter marking gauge 35 Carpenter mortise gauge 36 Hand Saw 37 Metal smoothing plane Anant 38 Screw driver 39 Contraction measuring scale 40 Wi Fi Router 41 Switch 42 DVD or Blu-Ray Writer 43 Network Rack 44 Screw Driver Set 45 Mini Dongle for Bluetooth devicesConnection 46 Patch Panel 47 Punching Tool 48 Tally 49 Box drawing instrument 50 Protractor celluloid 51 Scales plotting box wood 6 metric scales 52 Set square transparent 53 Set square celluloid 54 T-Square 55 Template- Architects and builders 56 Telescopic Alidade 57 Levelling staff straight pieces 58 Transit Theodolite with stand with all accessories 59 Digital theodolite 60 Instrument for total station 61 DLP projector 62 First aid box 63 Screen for projector 64 Air conditioner 65 Document Camera Visualiser 66 Smart board-inter active board 67 Measuring Steel Tape 68 Combination Plier Insulated 69 Screw Driver Insulated 6mm X 150 mm 70 Electrician screw driver thin stem insulated handle 4mm X 100 mm 71 Heavy Duty Screw Driver insulated 72 Electrician Screw Driver thin stem insulated handle 73 Punch Centre 74 Knife Double Bladed Electrician 75 Neon Tester 76 Steel Rule Graduated both in Metric and English Unit 77 Hammer cross peen with handle 78 Connecting screwdriver 79 Neon tester 500 V. 80 Screw Driver Set 81 Soldering iron 82 Electrician knife 83 Tweezers 84 Digital Multimeter 85 Soldering Iron Changeable bits 86 De- soldering pump electrical heated manual operators 87 Precision set of screw drivers 88 Precision set of screw drivers 89 Precision set of screw drivers 90 Tweezers Bend tip 91 Steel measuring tape 92 Tools maker vice 93 Crimping tool pliers 94 Magneto spanner set 95 File flat second cut 96 File flat smooth 97 Plier - Flat Nose 98 Round Nose pliers 99 Hammer ball pen 100 Allen key set Hexagonal set of9 101 Tubular box spanner set of 6Nos 102 Magnifying lenses 103 Continuity tester 104 Hacksaw frame adjustable 105 Chisel Cold Flat 106 Hand Drill Machine Electric with Hammer Action 107 Bench Vice 108 Bench Vice 50 mm 109 DC Regulated Variable Programmable DC Power Supply 110 LCR meter Digital Handheld 111 Analog multimeter 112 Clamp meter 113 Dimmer starter 114 Autotransformer 115 Milli Ammeter AC 116 Op Amp trainer 117 Digital IC Trainer 118 Digital IC Tester 119 Digital and Analog Bread Board Trainer 120 POWER ELECTRONICS TRAINER with at least 6 nos of onboard applications 121 Electronic circuit simulation software with 6 user licenses 122 Different types of electronic and electrical cables connectors sockets terminations. 123 DSO colour 124 PAM PPM PWM trainer kit 125 AMFM Commercial radio receivers 126 Sensor trainer kit containing Various sensors like Thermocouple RTD Thermocouple load cell strain gauge LVDT smoke sensors speed sensor Limit Switch Photo sensors Optocouplor Proximity Sensor 127 Fiber optic communication trainer 128 Seven segment DPM 129 LCD based DPM 130 SMPS of different make 131 UPS trainer 132 Mobile phone Trainer 133 Cell phone power source with charger chords for different cell phones 134 LCD TV Trainer kit 135 LCD TV 136 LED TV Trainer kit 137 LED TV 138 Home theatre system 139 Solar Training Kit Simulator 140 LED lighting system 141 Trammel 142 Steel Rule with metric British graduation 143 Compressor unit 144 Try Square 145 Pocker. 146 Caliper inside spring type 147 Mallet. 148 Caliper hermaphrodite spring type 149 Carrier for mounting components such as PB relay boxes. 150 Caliper outside spring type 151 Aviation Snips straight Cut 152 Cut section model for pneumatic components 153 Divider spring type 154 Planishing hammer. 155 Scriber 156 Centre Punch 157 Screw driver 158 Depthmicrometer. 0-25 mm 159 Stake grooving. 160 Hammer ball peen With handle 161 Comparators Gauge - Dial Indication with Stand and Bracket 162 Hammer ball peen With handle. 163 File flat - second cut 164 Engineer s try square knife- edge 165 File flat smooth 166 File half round second cut 150 mm 167 Vernier Bevel protector 168 Carbide Wear Block 169 Carbide Wear Block 170 Dot punch 171 Spirit Level metal Type - 2 172 Arm strong type tool bit holder 173 Combination Set 174 Arm strong type tool bit holder 175 Arm strong type tool bit holder 176 Stillson wrenches 177 Micrometer inside with extension rods 178 Vernier caliper 179 Adjustable pipe chain tonge to take pipes 180 Adjustable spanner 181 Screw pitch gauge Metric 182 Surface plateC.IGranite with Stand and Cover 183 Marking table Mild steel 184 Universal scribing block 185 V-Block pair with clamps 186 Punch letter set 187 Portable hand drill Electric 188 File knife edge smooth 189 File feather edge smooth 190 File triangular smooth 191 File round second cut 192 File square second cut 193 File flat second cut safe edge 194 File half round second cut 195 File round bastard. 196 File hand second cut 197 File card 198 Oil Can 199 Wooden handle forged Soldering Iron copper bit 200 Blow Lamp 0.50 liters. 201 Spanner adjustable 202 Double Ended tubular Box spanner set with Tommy bar 203 Glass magnifying 204 Clamp C 205 Hand Reamer set Tapar pin straight flute 206 Machine Reamer parallel Helical flute 207 Scraper flat 208 Scraper triangular 209 Scraper half round 210 Pipe wrench 211 Adjustable pipe die set BSP 212 Machine vice - Swivel Base 213 Machine vice - Swivel Base. 214 Sleeve drill Morse 215 Vice bench 216 Wing compass 217 Power tools for fastening 218 Different Profile gauges Plate type - For demonstration 219 Knurling tool Diamond 220 Knurling tool straight 221 Knurling tool Diagonal 222 Indexable boring bar with inserts 223 Machine maintenance mannual for Lathe Pedestal grinder Drill machine Power saw 224 Temperature gauge 225 Dowel pin straight 226 Standard Tap screws 227 Lapping plate 228 Caps screws 229 Drill gauges 230 Cast Iron Globe Valve Flanged type 231 C.I. Sluice Gate valve flanged type 232 Stop cock 233 Slip-on Forged steel Flange 234 Pipe threading die with handle 235 Pulleys for V-belt or Flat belt 236 V-belt and Flat belt 237 Packing gasket 238 Washer clutch keys jib cotter circlip 239 Bearing different types 240 Lifting sling 241 Bearing extractor 242 Pulley extractor 243 File half round bastard 244 REFRIGERATOR ( 365 LTR ) DOUBLE DOOR 245 GAS TANDOOR WITH SKEWER ROTI SET ( 12 SKEWERS ) COMMERCIAL 246 BAIN MARIE 2 PAN WELL 55.5 X 70 X 20 CM 247 CHINESE GAS BURNER DURA STEEL 60 X 24 X 30 248 SALAMANDER AVON REFRIGERATION 600 X 510 X 550 MM 249 ELECTRONIC GEYSER 25 LTR( HAVELLS, ADONIA )DIGITAL TYPE 250 DOUGH KNEADING MACHINE ( 5KG CAP )1000 WATT, STAND MIXER 251 WATER BOILER ( ELECTRICAL 15 LTR)2000 WATTS 252 MIXER CUM GRINDER FOOD PROCESSOR 1 NOX 1000 WATT,WITH 7 ACCESSORIES 253 WOK CHINESE KADAI 16 DIA METER 254 PRESSURE COOKER ( 5 LTR ) CAP 255 EGG CUTTER STAINLESS STEEL 256 STEAK HAMMER ALUMINUM 257 MS CUPBOARD INTERIO 2 DOOR WITH 3 SELVES 7 X 3 X 3 258 HAND BLENDER 250 WATT 259 SIZZLER PLATES ( 17-18 DIA) HEAVY FINE QUALITY 260 COFFEE URNS , ( 40 CUP CAPACITY) 261 CHINESE CHOPPER 262 MS CHOPPER 600WATT 263 KITCHEN KNIFE, BIG CARTINI 8 BLADE 264 VEGETABLE KNIFE 13 CM BLADE, MEYER CERAMIC KNIFE 265 BREAD KNIFE 8 BLADE 266 PASTA MACHINE , 150 WATT 267 WATER PURIFIER REVERSE OSMOSIS 6.5 LTS UV + UF 268 SODA MAKER MACHINE HEAVY DUTY INDUSTRIAL MODEL KVR - 8 FLAVOR 269 ESPRESSO MACHINE COFFEE GRINDER 1300 WATT 270 MINIBAR FRIDGE 271 LED 42” HD DISPLAY 272 MUSIC SYSTEM WITH DVD PLAYERS CONCEALED SPEAKER, 5.1 CHANNEL 273 ELECTRIC OVEN 20 LTRS (IFB, WONDER CHEF,HAVELLS) 274 DISPLAY FOOD CABINET OSHAM SLIDING DOOR ,814X 641 X 831 MM W X D X H 275 ROOM SERVICE TROLLEY HOME CENTRE MONTOYA TYPE 276 CARAFE BOROSIL SMALL WITH STRAINERS, 350 ML 277 CARAFE BOROSIL LARGE WITH STRAINERS , 700ML 278 SOUP FLASK TERMOSTEEL ( 500 ML ) 279 WATER FLASK THERMOSTEEL FLIP LID FLASK 1000ML SILVER 280 PASTA TROLLEY GOLDEN LINE 4 CASTOR WHEEL 281 EPABX SYSTEM + AVS MACHINE S- TECH CS432, 4 MAIN TRUNK LINES & 32 EXTENSION 282 SAFE DEPOSIT LOCKER / FORTE 40 BIOMETRIC SAFE 283 UMBRELLAS , CITIZEN 3 FOLD 284 STEEL CUPBOARD WITH UNBREAKABLE GLASS , INTERIO 4 SHELVES 7.5 X 3 X 2.5 285 FRIDGE WITH CABINET 275 LTR 286 VACUUM CLEANER WET & DRY 287 WASHING MACHINE 8KG FULLY AUTOMATIC 5 X 1400 RPM , INBUILT HEATER 288 WATER HEATER 25 LTRS HSE-SES , 2000 WATT 289 CARPET EXTRACTOR, CARPET CLEANER MACHINE 1100 , W PRO E X 25 290 HIGH PRESSURE JET CLEANER , KK PWIN 165 1800 WATT , 165 BAR 291 LUGGAGE RACK MINT WOOD H 27.5 X W 28.5 X D 12.8 292 HEAVY BOTTOM PAN 10 LTR NON STICK CANEROLI 40 CM 293 COOKER ( 2 LTR ) CLASSICS 2L ALUMINUM 294 MANDOLIN GRATER ADJUSTABLE SS 4 BLADES WITH HANDLE 295 PROBE THERMOMETER ( 75 - 100 DEGREE CELCIUS ) ST 9283B LCD , DIGITAL MULTISTEM THERMOMETER 296 CAKE STAND ( SS ) 13 TOP 297 HEAT PROOF GLOVES GRIPWELL KELVES PALM LEATHER HEAT RESISTANT GLOVES 298 GRINDING STONE FINE GRINDER STONE 10 299 PIZZA CUTTER STAINLESS STEEL 300 COOKIE CUTTER ( 5 SHAPES ) ALLAMWAR 12 PCS STAINLESS STEEL CUTTER SET 301 SANDWICH GRILLER / TOASTER SW X 400 700 WATT ( 302 JUICER MACHINE PHILIPS HR 1863/20 , 2 LTR 303 ROLLING BASE WOODEN 10 304 FRYING PAN NON STICK GRANITE FRY PAN ( 280 MM) BLACK 305 FRYING PAN LARGE NON STICK FRY PAN 240 MM0 306 CLEVER STAINLESS STEEL 2 IN 1 VEGETABLE SCISSORS 307 Steel rule 308 Outside spring caliper 309 Inside spring caliper 310 Hermaphrodite caliper 311 Divider spring 312 Centre Punch 313 Hammer 314 Cold chisel flat 315 File flat bastard 316 File flat 317 File flat smooth 318 Screw Driver 319 Scribing blockuniversal 320 Screw driver heavy duty 321 Spindle blade screw driver 322 Solid parallels in pairs different sizes in Metric 323 Oil stone 324 Punch letter set 325 Punch number set 326 Drill Chuck 327 File Half round 328 File triangular smooth 329 Reamer 330 Reamer adjustable 331 Tool bits holder Armstrong R.H. 332 Table chuck 333 Machine vice 334 Compound angle vice standard sine 335 Universal Machine Vice 336 Shaper tool holder turret type to suit the machine 337 Base chuck forslotter to suit the machine 338 Milling Cutter Side and face cutter 339 Milling Cutter Side and face cutter Adison 340 Milling Cutter Adison 341 Milling Cutter -Side and face cutter adison 342 Milling Cutter - Double Angle Unequal. adison 343 Milling Cutter - Double Angle Unequal. adison 344 Milling Cutter - Single Angle.. adison 345 Milling Cutter - Slitting Saw Cutter adison 346 Milling Cutter - Slitting Saw Cutter. adison 347 Milling Cutter - Shell End Mill.Parallel Shank end mills adison 348 Milling Cutter - Parallel Shank end mills. adison 349 Milling Cutter -mills. Parallel Shank end mills.. adison 350 Milling Cutter - Parallel Shank end mills… adison 351 Milling Cutter - Parallel Shank end mills.... adison 352 Milling Cutter - T Slot Cutter with Parallel Shank adison 353 Micrometer outside. 354 Micrometer depth gauge 355 Digital micrometer 356 Vernier Caliper 357 Direct reading vernier caliper 358 Combination set 359 Vernier bevel protractor 360 Telescopic gauge 361 Centre punch 362 Divider spring joint 363 Caliper odd leg spring joint 364 Wrench adjustable 365 Spanner double ended 366 Pipe wrench 367 Plumbing hammer weight 368 Four way reversible valve 369 Tape measuringgraduation in mm 370 Voltmeter ACDC portable precision grade Digital Panel board type 371 Rule steel 372 Drawing Board 373 Easel a Type stand 374 Hack Saw with Frame 375 Chisel Knife 376 Chisel Knife- 8mm 377 Chisel Knife- 10mm 378 Chisel Knife 20mm 379 Chisel Knife- 30mm 380 Diamond Glazier Knife 381 Paint Tin Opener 382 Shave Huck Knife 383 Glider Knife 384 Paint Burner Acetylene Gas 385 Screw Driver 386 Mild Steel Panels 387 Sink Stainless steel 388 Suction feed spray gun with accessories 389 Infra red lamp 390 Pneumatic Polishing Machine with Pads 391 Pipe vice 392 Pipe wranch 10 393 Pipe wranch 16 394 flat file- smooth finish 395 Circuler cut file 396 Raft cut 397 Pipe dai set metric Inches 398 Gun Spray with Gravity Feed Cup with Complete accessories with Complete accessories 13ltr 399 Gun Spray with Gravity Feed Cup with Complete accessories.. 400 Conventional Spray Gun For Pressure Feed 401 Pencil Hardness Tester 402 Air Compressor single Phase 1 HP 403 File - Flat - Bastard 404 File - Flat - Safe Edge 405 Cooling tower 406 File flat roughdouble cut 407 File half round fine double cut 408 File round finedouble cut 409 File flat fine double cut 410 File square finedouble cut 411 File triangular fine double cut 412 Try square 413 Divider spring joint 414 Caliper spring joint in side 415 Caliper odd legspring joint 416 Hammer ball pane 417 Cold Chisel flat and cross cut 418 Engineers rule 419 Tape measuring 420 Pliers flat nose 421 Line tester 422 Tweezers 423 Oil can 424 Surface Gauge universal 425 Bench vice 426 Hack saw tubular metal frame adjustable 427 Snip sheet metal straight nose 428 Snip sheet metal curved nose 429 Wooden mallet Nylon mallet 430 Round Punch 6mm 431 Round Punch 432 Round Punch 4mm 433 Screw driver plastic handle 434 Screw driver plastic handle Flat tip 435 Philips screw driver 436 Soldering ironexchangeable copper tip 437 Knife foldedstainless steel - 438 Tenon saw 439 Firmer chisel 440 Fire buckets 441 Quick couplesprocess tube adopter 442 Flaring tool set single type for tube. 443 Swaging tool punch type set of size for tube. external type for copper tube 444 Pipe cutter miniature for copper tube 445 Pinch of tool for copper tube 446 Ratchet spanner 447 Capillary plug gauge 448 Piercing pliers 449 Spanner double ended 450 Wrench adjustable 451 Wrench adjustable length 250mm 452 Valve key handleTreated as consumable 453 Hollo Punch hole for cutting gasket 454 Scissor gasketcutting stainless steel 455 L-Allen key 456 T-Allen key set 457 Pipe cutter withbuilt in reamer and space cutter for copper tube 458 Lapping plate 459 Hammer ball peen 460 Tap set withmatching drills 461 Tap set withmatching drills V to 462 Piercing Valve 463 Feeler gauge 464 Tape measuringgraduation in mm 465 Ammeter ACDCportable precision grade Digital Panel board type 466 Multi meter digital type 467 C.R.O Single beam 468 C.R.O Dual trace Double beam 469 A.F.O Oscillators 470 Pressure gauge 471 Compound gauge Digital type 472 Electronic leak detector 473 Sling psychro meter mounted on aluminum back 474 Stop watch 475 Multi meter 476 Sensor thermometer digital 477 filler guage 478 Wire gauge 479 Dial thermometer 480 Compressors testers for small hermetic compressors 481 Precision set of T5 T6 T7 screwdrivers- 482 Jacket stripper Coring tool for 500 series cable 483 Center conductor cleaner 484 Universal drop trimmer for RG 6/11 cables 485 F - connector tool for RG 6/11 cables 486 F connector compression tool for RG 6/11 cables 487 Solar Training Kit Simulator With built in meters for DCV DCA AC Multifunction Meter for ACI ACV Power Frequency Protection Circuits BS-10 terminals formaking the connection Single Dual axis tracking system Charge Controller PWM based MPPT Charging Stage Bulk Absorptions and Float 488 LED lighting system Measurement of Power Voltage Current Power Factor and Light output performance of different lighting products like LED CFL at variable inputvoltages 0 to 245V variable AC 489 PLC Systems with digital IP OP modules and software 6 Digital Inputs 24V DC. 4 Digital Outputs 24V DC 2K Words of memory 256 words of register. Powerful features like built in Floating Point Sub Routines etc.One RS232 C communication facility for PC interface. Three channels can be configured as follows Pulse width modulation output or Pulse train outputor High speed counter input. 490 Electronic Pneumatics Trainer kit 491 CRO dual trace 20 MHZ ( Component testing facilities ) 492 Steel wire Brush 50mmx150mm 493 carborundum 15 x 5 x 4 cm smooth 494 Straight edge gauge 2 ft. 495 Straight edge gauge 4 ft. 496 Surface gauge with dial test indicator plunger type i.e. 0.01 mm 497 Tachometer Counting type 498 Taps and Dies complete sets 5 types 499 Taps and wrenches - Metric 500 Temperature gauge 0- 100 deg c 501 Thread pitch gauge metric BSW 502 Timing lighter 503 Universal puller for removing pulleys bearings 504 V Block 75 x 38 mm pair with Clamps 505 Vacuum gauge to read 0 to 760 mm of Hg 506 Valve Lifter 507 Valve spring compressor universal 508 vernier caliper 0-300 mm with least count 0.02mm 509 Vice grip pliers 510 Voltmeter 50VDC 511 Hand Shear Universal 250mm 512 Solid Parallels in pairs Different size in Metric 513 Spanner Clyburn 15 514 Spanner T. flocks for 515 Spark lighter 516 Spark plug spanner 14mm x 18mm x Size 517 Spirit level 2V 250 05 518 Spring tension tester 519 Stake grooving. 520 Spanners socket with speed handle T-bar ratchet and universal upto 32 mm set of 28 pieces with box 521 Steel tool box with lock and key folding type 400x200x150 mm 522 Wire cutter and stripper 523 Car Jet washer with standard accessories 524 Chaser hard WV 9 to 40 T.P.I. set of 11 external. 525 Chaser hand WW 9 to 40 T.P.I. set of 11 internal. 526 Chisel 10 cm flat 527 Chisels cross cut 200 mm X 6mm 528 Circlip pliers Expanding and contracting type 15cm and 20cm each 529 Clamps C 100mm 530 Clamps C 150mm 531 Clamps C 200mm 532 Compression testing gauge suitable for diesel Engine 533 Connecting rod alignment fixture 534 Copper bit soldering iron 0.25 Kg 535 Cylinder bore gauge capacity 20 to 160 mm 536 DC Ohmmeter 0 to 300 Ohms mid scales at 20 Ohms 537 Depth micrometer 0- 25mm 538 Dial gauge type 1 Gr. A complete with clamping devices and stand 539 Dividers 15 cm Spring 540 Drift Punch Copper 15 Cm 541 Drift copper 10 x 15 12 mm 542 Drill point angle gauge 543 Drill twist 1.5 mm to 15 mm various sizes by 0.5 mm 544 230 V 25 watts Electric Soldering Iron 230 V 60 watts 545 Electric testing screw driver 546 Engineers square 15 cm. Blade 547 Engineers stethoscope 548 Equipment puncture in box 549 File flat 20 cm bastard 550 File half round 20 cm second cut 551 File Square 20 cm second cut 552 Files assorted sizes and types including safe edge file 20 Nos 553 Glow plug tester 554 Granite surface plate 1600 x 1000 with stand and cover 555 Grease Gun 556 Grover- 34mm. 557 6mm Grover 558 Growler 559 Hacksaw frame adjustable 20-30 cm 560 Hammer Chipping 0.25 Kg 561 Hammer copper 1 Kg with handle 562 Hammer Mallet 563 Hammer Plastic 564 Hand operated crimping tool i for crimping up to 4mm and ii for crimping up to 10mm 565 Hand reamers adjustable 10.5 to 11.25 mm 11.25 to 12.75 mm 12.75 to 14.25 mm and 14.25 to 15.75 mm 566 Hand vice 37 mm 567 High rate discharge tester cell tester 568 Left cut snips 250mm 569 Magneto spanner set with 8 spanners 570 Magnifying glass 75mm 571 Marking out table 90X60X90 cm 572 Multi Scan Tool 573 Multimeter digital 574 Oil Stone 15 cm x 5 cm x 2.5 cm 575 Oscilloscope 20MHz 576 Outside micrometer 0 to 25 mm 577 Outside micrometer 25 to 50 mm 578 Pat melting 579 Philips Screw Driver set of 5 pieces 100 mm to 300 mm 580 Pipe cutting tool 581 Pipe flaring tool 582 Piston Ring groove cleaner 583 Pliers side cutting 15 cm 584 Poker 585 Portable oil monitoring Indicator 586 Power Supply 0-12 v lamp 587 Radiator pressure cap 588 Rear axle assembly- gear box steering box assembly of the diesel engine 589 Right cut snips 250mm 590 Rivet sets snap and Dolly combined 3mm 4mm 6mm 591 Scriber 15 cm 592 Scriber with scribing black universal 593 Set of stock and dies - UNC UNF and metric 594 Shear Tin Mans 450 mm x 600mm 595 Sheet Metal Gauge 596 Soldering Copper Hatchet type 500gms 597 Sher Tinmans 300mm 598 Shovel 599 Ammeter 300A 60A DC with external shunt 600 Angle plate adjustable 250x150x175 601 Angle plate size 200x100x200mm 602 Arbor press hand operated 2 ton capacity 603 Auto Electrical test bench 604 Battery charger 605 Belt Tensioner gauge 606 Spanner ring set of 12 metric sizes 6 to 32 mm. 607 Blow Lamp 1 litre 608 AC alternator slip ring puller 609 Allen Key set of 12 2mm to 14mm pieces 610 Air blow gun with standard accessories 611 Alternator for tractor different type Mico , Bosch, tux 612 Hands file 20 cm. Second cut flat 613 Caliper outside spring joint 614 Caliper inside spring joint 615 Caliper odd-leg firm joint 616 Steel Rule 617 Scriber 618 Hammer ball peen 619 Centre punch 620 Prick punch 621 Divider spring joint 622 Safety goggles clear glass Good quality 623 Marking table CI 624 Bench vice 125 mm jaw 625 V - Block 626 Pliers flat nose 627 Micrometer Outside 628 Micrometer Inside 629 Vernier Bevel Protractor 630 Vernier Micrometer 631 Universal Dial Test Indicator - Plunger Type 632 Vernier Height Gauge 633 Plain Ring and Plug Gauge 634 Drill Twist Set 635 Reamer machine 636 Combination Drill Centre Drill 637 Tool Bit assorted sizes on holder 638 Chalk Board on mobile stand 639 Desk 640 Hand Chaser 641 Hand Chaser 642 Revolving Centrer to suit Lathe tailstock 643 Tool Cemented carbide assorted shaped External for steel turning 644 Machine Chase 645 Coventry Die head 646 Lathe Mandrels Diff. Types 647 Coventry Type Die Head Self opening 648 Stainless steel rule 649 Hack saw frame 650 File half round 651 File flat 652 Try square 653 Earth clamp 654 Electrode holder ESAB 655 Oxygen Gas Pressure regulator double stage ESAB 656 Acetylene Gas Pressure ESAB 657 CO2 Gas pressure regulator with flow meter ESAB 658 Argon Gas pressure regulator ESAB 659 First Aid box ESAB 660 Flash back arrester torch mounted ESAB 661 Flash back arrester cylinder mounted ESAB 662 Screw Driver 663 Screw Driver 664 Terminal screw Driver 665 Hammer Ball peen 666 Neon tester pencil bit type 667 Small crimping tools assorted 668 Spanner set DE 669 Screw driver set set of 5 670 File half round 2nd cut 671 File round 2nd cut 672 Soldering iron TONY 673 Neon tester 674 Spade 675 Sickle 676 Khurpa 677 Kasola 678 Trifali 679 Zindra 680 Dori (Nylon rope) 681 Wheel hand hoe 682 pH meter 683 Electrical conductivity meter 684 Flame photometer 685 Spectrophotometer 686 Atomic absorption spectrophotometer 687 Shaking apparatus 688 Distillation unit 689 Ammonia distillation unit (with heaters) 690 Gas connection 691 Sampling tools (augers) 692 Refrigerator 693 Gas cylinders with regulators 694 Gas cylinders with regulators 695 Gas cylinders with regulators 696 Incubator (with temperature control) 697 Infrared soil moisture estimation unit 698 Electric oven 699 Soil cores 700 Soil infiltratormeter 701 GPS system with mobile phone 702 Table top centrifuge 703 Auto Titrator 704 Battery charger

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 6

Haryana View Result →

29.

Housing Urban and Rular Development #10645315 Price Bid

Annual Repair And Maintenance Of Various Electrical Installation And Mechanical Equipments At Fire Station, Keshavpuram. ( Sh Sitc Of Real Time Online Monitoring Wqm System ) -Design, Supply, Installation, Testing And Commissioning Of Wqm ( Water Quality Monitoring System ) With Real Time Online Monitoring All The Specified Parameters As Per Bsi Std For Drinking Water And Have A Check On The Given Parameters.Wqm Should Be A Skid Mounted System Comprising Of Ss Storage Sampling Tank Of 50 Ltr Capacity, Circulation Pump, Control Panel, Interconnecting Piping With All Valves & Fittings. System Should Be Installed In Parallel To The Existing Water Supply Line, It Should Take Bleed From The Water Supply Line And Should Reconnect To Same Line. Sampling Tank Should Have All The Sensors Attached To It To Monitor The Real Time Parameters. The Sensors Should Be Compatible To The Local Bms. The Entire System Of Pump, Tank And Fittings Shall Be Mounted On Base Plate And Shall Have Structure Frame To Strengthen / Balance The Entire Skid. The Supplier Shall Comply All The Specification. The System Should Be Iso 9001:2015 And Ce Marked. The System Shall Be Equipped With Following Feature And Specification As Under.System Operationi ) Sampling Tank: - Ss 316 Mirror Finished 50 L Hold Up Volumeii ) Valves: - Manual Valves And Check Valve To Isolate The System From The Main Stream During Maintenance. Iii ) Piping: - Food Grade Pvc Piping Iv ) Pump: - At The Inlet Of Wqm For Sucking Water From Main Line, Passing Thru Sampling Tank And Then Sending It Back To Main Line.V ) All Component Inside The Tank Shall Be Of Ss316 L Or Higher Grade Materialelectrical Control Systemi ) Electrical Connection Required: - 3-Phase, 415 Volt And 50 Hzii ) Single Point Termination Should Be Required, All Internal Wiring Shall Be Strictly Factory Fittedmonitoring And Control Facilityi ) The System Shall Have Separate Indicators For Each Parameter In The Control Panelii ) System Should Have WaterS Ph Value, Tds ( Total Dissolved Solids ) Temperature Sensor, Orp ( Oxygen Reduction Potential ) Sensor.Iii ) Control Panel Should Have Pump On / Off Status. Monitoringsensors Featuresi ) Ph Sensor – Resolution: 0.01Range : 0 To 14Phph Accuracy: ± 0.01Phcalibration: 2 Point ( Manual ) Retransmission Output : 4 To 20 Ma Isolatedii ) Tds Transmitter-Range : 0 To 2000 Ppm Resolution : 1 Ppm Measuring Accuracy : ±1%Fsindication : 3.5 Digit Led Display Retransmission Output : 4 To 20 Ma Isolatediii ) Orp Indicating Controller Cum Transmitter Systemrange : ± 2000 Mvresolution : 1 Mvaccuracy : ± 0.2% Of Full Scalecalibration : Soft Key Calibration – 1 Pointaccessories And Partsi ) Ss Tank-1 Noii ) Local Control Panel All Indicators Iii ) Water Pump- 1 Noiv ) Manual Valve-Suitable No’Sv ) Check Valve- 2 No’Svi ) Ph Sensor -1 Novii ) Orp Transmitter- 1 Noviii ) Total Suspended Solid Transmitter-1Noix ) Temperature Sensor-1 No

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Delhi View Result →

30.

Banking and Finance #10607564 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 9

Odisha View Result →

31.

Educational and Research Institute #10598792 Price Bid

Supply Of Material Testing Lab I Equipments - 2 Rock Well – Cum –Brinell Hardness Testing Machine Nrock Well – Cum –Brinell Tester – Manually Operated N Major Load : 60, 100, 150, 187.5, 250 Kgf N Minor Load: 10 Kgf N Max.Test Height : 230Mm N Depth Of Throat: 133Mm N Machine Dimension ( Approx ) : L-450Mm, W-265Mm, H-627Mm. N Testing Table 50Mm Dia: 1 N Testing Table 38Mm Dia. With ‘V’Groove For Round Jobs 6-45Mm Dia: 1 N Diamond Indentor – Rockwell: 1 N Steel Ball Indentor 1 / 16”With 5 Spare Balls: 1 N Steel Ball Indentor 2.5Mm With 5 Spare Balls: 1 N Test Block Rockwell ‘C’ : 1 N Test Bock Rockwell ‘B’: 1 N Test Block Hb 2.5 / 187.5 : 1 , Allen Spanners : 5 N Screw Drivers: 1, Clamping Device: 1 N Dash Pot Oil: 1 Bottle, Wooden Box For Std. Accessories : 1 N Telescopic Sleeves For Elevating Screw Protection: 1 Set N Brinell Microscope: 1, Machine Cover: 1 N Instruction Manual: 1 3 Torsion Testing Machine: Nanalogue Torsion Testing Machine Of 100Nm With Standard Accessories Nspecifications: Nmaximum Torque Capacity: 100Nm Ntorque Ranges: 100, 50, 20Nm Nno. Of Div. On Dial: 500 Ntorsion Speed: 1.5Rpm Nclearance Between Grips: 0-420Mm Ngrips For Round Specimens: 4-8, 8-12Mm Ngrips For Flat Specimens Width Mm: 2-8, 25Mm Nmotor ( 400-440V, 3 Phase & 50Hz. ) : 0.5Hp Naccuracy Of Torque Indication: + 1% Of The True Torque Nnote: Auto Torque Selector Torque Range Adjustment. Ngeared Motor With Gear Box To Apply Torque To Specimen. Nautographic Recorded To Give The Relation Between Torque And Angle Of Twist. 4 Analogue Impact Testing Machine ( Izod & Charpy ) With Standard Accessories: Nmaximum Capacity: 300J / 168J Nminimum Scale Graduation: 2J Noverall Size ( Approx. ) : 1.1M X 0.45M X 1.65M ( H ) Naccessories: N Caliper Gauge For Checking V Notch For Izod & Charpy. N Templates For Checking 10 X 10 Mm Cross Section Of Izod / Charpy Test Specimen. N Depth Notch Gauge Including V & U Notch Gauges For Checking Depth Below V / U Notch, Angle And Radius. N Izod Support For 40 Mm Dia Izod Round Specimen. N Self Centering Tong For Quick And Accurate Setting Of Charpy Test Specimen. N ‘V’Notch Milling Cutter. N ‘U’Notch Milling Cutter. N 5 Deflection Test Apparatus Nsteel And Wooden Beam, Magnetic Stand, Deflection Gauge, Slotted Weights, And Weighing Hanger . 6 Weighing Balance-Digital 10Kg Capacity : N One Gram Accuracy N Battery Backup 8 Hours / Direct Electrical Connection. N 7 Is Sieve No 9 ( 90 Microns ) Made Of Brass 8 Inches Dia Meter. 8 Vicat Needle Apparatus ( To Conduct Cement Test ) ( With Isi Certification Is 5513 ) : Ncomplete With Following N Vicat Mould N Glass Base Plate N Needle Initial Setting N Needle For Final Setting N Consistency Plunger N Mild Steel Base Plate N Vicat Mould Split Type With Clamping Ring. 9 Compression Testing Machine 100 Tons Capacity: N Analogue Compression Testing N Machine – 100 T Capacity – Electric Cum Hand Operated Consisting N Straining Unit N Control Panel N Power Pack N Hydraulic Control N Large Dial And A Pointer Load Indicator System N Pendulum Dynamometer N Autographic Continuous Roll Load – Elongation Recorder N Accuracy & Calibration – Comply With Grade “A” Of Bs: 1610 And N Class 1 Of Is 1828. N Specification: N Maximum Capacity : 1000 Kn, 1St Measuring Range : 0-1000Kn N Minimum Graduations: 2Kn, 2Nd Measuring Range: 0-500 Kn N Minimum Graduations : 1Kn, 3Rd Measuring Range: 0-250 Kn N Minimum Graduations : 0.5Kn, 4Th Measuring Range: 0-100 Kn N Minimum Graduations : 0.2Kn, Nnumber Of Division On Load Measuring Dial: 500 N Maximum Clearance For Compression Test At Fully Descended Working N Piston: 500Mm N Ram Stroke: 100Mm, Power: 1.5Kw N Voltage : 400-440V, 3 Phase N 10 Tile Flexure Testing Machine 200Kg Capacity: N ( Ref. Standard Is: 654, 1237 ) : Nthe Flexure Strength Testing Machine Should Be A Double Lever ( Leverage 1:12 ) Loading Machine And The Load Should Be Supplied By Flow Of Lead Shots, Which Should Stop Automatically When The Sample Breaks. Applied Load Should Be At The Rate Of 450 To 550 N / Minute ( 200Kg / Minute ) . Accuracy Of Load Indication Should Be + 2%. The Equipment Consists Of Two Bearing Rollers And One Loading Roller. 11 Permeability Apparatus : Nblains Air Permeability Apparatus ( With Isi Certification Mark 5516 ) Ncomplete With The Following: N Permeability Cell N U Tube Manometer Mounted On A Stand N Perforated Metal Disc N Plunger N Rubber Stopper N Rubber Tube 30Cm Long N Filter Paper Discs – 12 Nos. N Dibutylphthalate Liquid 100Ml Bottle N Punch N Non-Perforated Disc N Suction Bulb. N

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Tamil Nadu View Result →

32.

Educational and Research Institute #10560896 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 14

West Bengal View Result →

33.

Health and Family Welfare #10551406 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 1

Rajasthan View Result →

34.

Educational and Research Institute #10524394 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 15

West Bengal View Result →

35.

Drinking Water Supply and Sanitation #10523073 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 8

Uttar Pradesh View Result →

36.

Water Resources and Irrigation #10512078 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 9

Uttarakhand View Result →

37.

Water Resources and Irrigation #10512072 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 9

Uttarakhand View Result →

38.

Educational and Research Institute #10502902 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

Tamil Nadu View Result →

39.

Public Administrative Department #10499862 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Andaman And Nicobar Islands View Result →

40.

Public Administrative Department #10472638 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Uttar Pradesh View Result →

41.

Communications and Information Technology #10457552 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Telangana View Result →

42.

Educational and Research Institute #10433653 Price Bid

Procurement Of Lab Equipment For Different Branch For 3Rd Semester.-2 Vernier Callipers ( Vernier Constant ( 0.02 Cm ) 3 Horizontal Board Apparatus For Determining Cofficient Of Static Friction Between Wood And Glass ( Base Board 45 X 7.5 Cm Csi Very Superior Quality Having Thick Teak Wood Base, Fittedwith Glass Plate, Complete With Levelling Screws, Pan , Small Graded Weights, Pulley And Wooden Block. Export Quality. Heavy Pattern ) 4 Hooks Law Apparatus ( Consisting Of 50Cm Long Mirror Scale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand On Metal Stand With Mirror Scale ( A ) Csi Superior On Heavy Base, About 50 Cm High For Taking More Readings, Complete With Weights ( B ) Helical Spring: Light Spiral Spring With Pointer, Easy To Work With 50 Gm. Weight Complete With Hook For Hanging. ) 5 Flywheel Apparatus ( Csi Superiorquality Flywheel With Weights Comprising Of Carefully Machined And Balanced Cast Iron Wheel And Steel Spindle Is Supported On Ball Bearings In Strong Iron Brackets Thickness: 4.4 Cm, Diameter :20 Cm • Wall Type With A Pointer • With Revolution Counter Set Ofslotted Weights For Flywheel Complete With Weights Cord And Hook ) 6 Linear Expansion Horizontal Apparatus ( Csi Superior Quality With Brass Rod, Stainless Steel Finish Complete Set Up • A 50 Cm Long Expansion Base With A Built-In Dial Gauge And Thermistor. Three Metal Tubes — Brass, Copper ( 99.5% Cu, 0.5% Te ) , And Aluminum ( 98.9% Al, 0.7% Mg, 0.4% Si ) : 6.4 Mm Outside Diameter. • A Foam Insulator To Avoid Heat Loss At The Thermistor Connection Point. •Thermoplastic Elastometer Tubing With 6.4 Mm I.D. ➀ A Source Of Steam Or Hot Water, Such As The Pasco Model Td-8556A Steam Generator. ➁ A Digital Ohmmeter Such As Pasco Model Se9589 To Measure The Thermistor Resistance. Leads Should Have Banana Plug Connectors, Such As Pasco Model Se-9750 Or Se-9751 Patch Cords ) 7 Apparatus To Determine Time Period Of Oscillation Of Cantilever ( Best Quality Csicantilever, Stopwatch, Slotted Weight, Meter Rod, Clamp ) 8 P-N Junction Diode Apparatus Trainer Kit ( Best Quality Csi To Verify Diode Characteristics : Fitted Withvariable Source Voltage. And Regulated Power Supply One Diode. Onedcvoltmeter, Mo.65&Onedcammetermo-65 Mounted On The Same Base With Terminals ) 9 Ic Regulated Power Supplies ( 0-12 V / 1A ) 10 Plug Type Resistance Box ( 0-200 Ω ) 11 Plug Type Resistance Box ( 0-10 Ω ) 12 Table Galvanometer ( Analog 30-0-30 ( 20Ua / Div ) ) 13 Portable Dc Voltmeter ( 0-10 V ) 14 Analog Dc Ammeter ( 0-500 Μa ) 15 Analog Dc Ammeter ( 0-500 Ma ) 16 One Way Plug Key 17 Slidingrheostat ( Wire Round Sliding Rheostat ) 18 Inverse Square Law Using Photo Cell ( Wooden Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Micro Ammeter. • On Board Analog Moving Coil Meters • Galvanometer : 30-0-30 / Micro Ammeter. • Selenium Photocell Mounted In The Metal Box With Metal Base • Lamp Holder With 60-Watt Bulb With Metal Base Standard Accessories : • Selenium Photocell Mounted In The Metal Box • Wooden Plank With Half-Meter Scale Fitted On It. • Lamp Holder With Lamp • Patch Chords, Instruction Manual ) 19 Automatic Saw Machine 20 Pedestal Grinder 21 Single Purchase Crab Winch ( Wall Hanging White Stainless Steel Winch Crab Single Purchase ) 22 Double Purchase Crab Winch ( Diameter Of Load Drum 85 Mm, Pulley Diameter 230 Mm, Measuring Height 1M Wooden Scale, Weight: 1 Set Of Slotted Weight 1 Kg = 200 Gm X 5 Piece 1 Set Of Slotted Weight 2.5 Kg = 500 Gm * 5 ) 23 Worm & Worm Wheel ( Warm O.D. 1 To 12 1 Module To 20 Module, Warm Mild Steel, En-8 / 19 / 24 / 31 / 36, Wheel Mild Steel, Cast Iron, Gun Metal And Pb2 ) 24 Differential Axle & Wheel ( Diameter Of Wheel: 170Mm, Diameter Of Major Axle: 100Mm, Diameter Of Minor Axle: 67Mm, Velocity Ratio: 10.5 : 1, Maximum Recommended Load: 50N, Weights Set: 4 X 0.1N, 3 X 0.2N, 1 X 1N, 2 X 2N, 2 X 5N, 1 X 10N, 2 X 20N ) 25 Simple Screw Jack ( Lifting Capacity 20 Kn ) 26 Co-Efficient Of Friction Measuring Instrument ( 7 Blocks Of Different Materials Blocks Are Given For Testing ) 27 Izod Impact Testing Machine ( Energy Range 0-25 Joule Least Count 0.1 Joule Hammer For Izod 2.75 Joulechapy 1.0 Joule ) 28 Rockwell Hardness Tester ( Test Load- 250-3000 Kgf, In Stage Of 250 Kgf, Magnification 4X, Least Count 0.01Mm, Throat Depth 200Mm, Power Supply 415V, 50 Hz, 3 Phase, Measurement Range 1-6Mm. ) 29 Dye Penetration Test Kit ( Aerol D P Test Kit 400 Ml ) 30 Bourden Tube Pressure Gauge ( 0 -50 Kg / Cm2 ) 31 Cochran Boiler Model, Cut Section 32 Babcock And Wilcox Boiler Model, Cut Section 33 Cut Section Of Boilar Mounting & Accessaries 34 Soldering And De-Soldering Machine ( 240 Volt, 50 Hz ) 35 Digital & Analog Multimeter 36 Hook Up Wire ( 0.5Mm ) 37 Resistor ( 10 Ohm, 15 Ohm, 20 Ohm, 30 Ohm, 100 Ohm, 200 Ohm, 1K Ohm, 2K Ohm, 5K Ohm, 10K Ohm, 20 K Ohm, 100K Ohm, 1M Ohm ) 38 Capacitor ( 25 Volt , ( 10, 12, 15, 22, 33, 47, 56, 82, 100, 120, 150, 220, 470, 680, 1000, 1200, 2700, 3300, 6800, 8200 ) Pico Farad, ( 0.1, 0.12, 0.15, 0.22, 0.33, 0.47, 0.68, 0.82, 1, 1.2, 2.2, 3.3, 34.7, 6.8, 8.2, 10, 47 ) Micro Farad ) 39 Relay ( 220V ) 40 Diode ( 220 Ac To 220 Dc Volt ) 41 Zener Diode ( 220 Ac To 220 Dc Volt ) 42 L.E.D ( 3 Volt ) 43 Regulated ( 0-220 Volt Dc Supply ) 44 Bread Board 45 Transistor Pnp & Npn Type ( 2 Amps ) 46 Solder 47 Soldering Paste 48 Electrical Tester ( 240 Volt Ac ) 49 Electrical Fault Finder ( 240 Volt, 50 Hz ) 50 Lags / Joint Socket 51 Single Phase Energy Meter ( 230 Volt 50 Hz ) 52 Single Phase Motor ( Celling Fan ) ( 120 Watt, 240 Volt ) 53 Floursent Lamp With Choke And Starter ( 40 Watt , 220 Volt, 50 Hz ) 54 Soldering & Riveting Machine ( 25 Watt, 220 Volt ) 55 Hammering Drill Machine ( 220 Volt , 50 Hz ) 56 Electrical Drill Machine ( 220 Volt , 50 Hz ) 57 M.C.B ( 5 Amps, 220 Volt ) 58 Digital Multimeter 59 Electrical Calling Bell ( 240 Volt, 5 Amp ) 60 Electrical Socket ( 240 Volt, 5 Amp ) 61 Electrical Tester ( 230 Volt ) 62 Pliers ( ( 8 Inch ) ) 63 Screw Driver With Insulated Handle ( 8 Inch ) 64 Wire Cutter 65 Half Round File ( 250 Mm ) 66 Nose Plier ( 150 Mm ) 67 Weighing Scale ( 4Kg, Lc:1G ) 68 Hot Air Oven ( 45 L, 1500 W ) 69 Utm ( 440 V, 100 Kn, 1.3Hp ) 70 Air Permeability Apparatus ( 3 Kg Approx ) 71 Vicat Apparatus ( 5 Inches X 5 Inches, 40 Mm Height, Is 4031 2645 2542 Part 1 1727 5513 Amp 712 Bs 12 146 915 1370 4027 4246 4248 ) 72 Ctm ( Analogue, 2000Kn, Electrically Operated ) 73 Sieve Brass Framewith Sieves As Per Bis: 383 1970 74 Slump Test Apparatus ( Is: 7320 ) 75 Compaction Factor Apparatus ( Is: 5515 ) 76 Flakiness And Elongation Gauge ( Is: 2386 ) 77 Aggregate Impact Test Apparatus 78 Los Angeles Abrasion Testing Machine ( Is: 10070 ) 79 Aggregate Crushing Value Apparatus, With Accessories ( 150 Mm, Is :9376-1979 ) 80 Ring And Ball Apparatus ( 220 V, 50 Hz, Single Phase ) 81 Penetrometer For Bitumen Penetration 82 Pensky Martens Flash Point ( Closed ) Tester ( Electrically Operated )

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

West Bengal View Result →

43.

Health and Family Welfare #10433257 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 8

Jharkhand View Result →

44.

Health and Family Welfare #10400331 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 10

Madhya Pradesh View Result →

45.

Public Administrative Department #10397807 Price Bid

Tender For Dth Bore At Ward No 19 Llird Call; 1- Balance 1 Set i- 7 kg To 10 kg. Capacity, semi-self indicating type-Accuracy 10 gm. ii- 500 gm. Capacity, Semi-Self indicating type Accuracy 1 gm. iii- Pan Balance-5 kg, Capacity, Accuracy 10 gm. 2- Ovens-Electrically operated, thermostatically 1 Set controlled up to 110 G. Sensitivity 1c 3- Sieves: As per IS 460-1962 1 Set i- I.S. Sieves-450 mm internal dia of sizes 100 mm, 80 mm, 63mm, 50mm, 40mm, 25 mm, 20mm, 12.5mm, 10mm, 6.3mm, 4.75mm complete with lid and pan. ii- IS Sieves- 200 mm internal dia, (brass frame ) consisting of 2.36 mm, 1.18 mm, 600 microns, 425 microns, 300 microns, 212 microns, 150 microns, 90 microns, 75 microns with lid and pan. 4- Sieve shaker capable of 200 mm and 300 1 Set mm dia sieves, manually operated with timing switch assembly 5- Equipment for slump test-Slump Cone, steel 1 Set plate tamping rod, steel scale scoop. 6- Dial gauges 25 mm travel- 0.01 mm/division. 1 Set Least count-2 Nos. 7- 100 tones compression testing machine, 1 Set electrical- cum manually operated. 8- Graduated measuring cylinders 200 ml 1 Set capacity- 3 Nos. 9- Enamel trays (for efflorescence test for 1 Set bricks) i- 300 mm X 250 mm X 40 mm -2 Nos. ii- Circular plates of 250 mm dia- 4 Nos.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Madhya Pradesh View Result →

46.

Heavy Industries and Public Enterprises #10390733 AOC

Contract Date: Jul 17, 2025 Contract Value : ₹ 11.48 Crore

Boards / Undertakings / PSU No of Bidders 1

Kerala View Result →

47.

Educational and Research Institute #10372706 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

West Bengal View Result →

48.

Defence #10365851 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Gujarat View Result →

49.

Educational and Research Institute #10320058 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 16

West Bengal View Result →

50.

Housing Urban and Rular Development #10312762 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 7

Delhi View Result →

TenderDetail

Loading tenders