View Bid Results For Electrical Fabrication Tenders

We found 2324 Bid Results related to electrical fabrication tenders. You can find Contractor details who won electrical fabrication tenders along with contract details in Bid awards announcements section.

Filters
Stage
1588
465
271
Tender Publishing Platform
282
2042
State / UT
37
341
266
242
225
174
144
133
122
79
76
72
68
52
50
39
38
34
30
26
23
22
14
11
10
8
7
4
3
2
2
1
1
1
1
1
1
1
Contract Value
863
520
630
306
Publish Date
21
0
0
0
0
Sector
32
342
334
309
288
278
102
97
97
83
55
41
31
30
28
25
25
25
16
16
16
14
13
11
8
7
7
6
6
5
5
3
1
Ownership
7
1126
446
379
343
26
3
1
Within keyword
Active filters:
Showing 1–47 of 2324 tenders matching your filters
1.
Environment and Forests #11497514 Technical Bid
Tender For Supply Of 1 Material_Rajgarh 2 White Cement 3 Lime (Kilograms) 4 Vitrified Tiles (Isi) 1’X1’ Single Charge 5 Vitrified Tiles (Isi) 2’X2’ Single Charge 6 Vitrified Tiles (Isi) 2’X4’ Single Charge 7 Vitrified Tiles (Isi) 1’X1’ Multi Charge & Double Charge 8 Vitrified Tiles (Isi) 2’X2’ Multi Charge & Double Charge 9 Vitrified Tiles (Double Charge) 10 Glazed Tiles (Isi) 12’’X18’’ (Waterproof) 11 Corrugated Galvanized Steel Profile Sheet (0.5 Mm) 12 Tile Fixing Adhesive 13 Damp Proofing 14 Oil Paint (All Colors) 15 Wall Putty 16 Exterior Emulsion (All Colors) 17 Interior Emulsion (All Colors) 18 Primer 19 Gi (Galvanized Iron) Binding Wire (1.22 Mm) 20 Ms (Mild Steel) Hollow Pipe (Isi) (Tata Steel, Jsw Steel, Jindal Steel, Power Steel & Other Reputed Brands) 21 Cement (Isi Mark, Major Brands: Grade 53 / Grade 43 & Ppc) (Per Bag) 22 Steel (Isi Mark, Tmt Grade) - 6 Mm (Kilograms) 23 Steel (Isi Mark, Tmt Grade) - 8 Mm (Kilograms) 24 Steel (Isi Mark, Tmt Grade) - 10 Mm (Kilograms) 25 Steel (Isi Mark, Tmt Grade) - 12 Mm (Kilograms) 26 Steel (Isi Mark, Tmt Grade) - 16 Mm (Kilograms) 27 Organic Fertilizer — Containing A Minimum Of 1% Cow Dung Manure, 10% Phosphate, 10% Calcium, 10% Potash, 10% Gypsum, And Other Micronutrients. 28 Growth Hormone 29 Neem Oil 30 Neem Cake 31 2 Hp Motor With Motor Starter Three Phase Submersible Pump 32 3 Hp Motor With Motor Starter Three Phase Submersible Pump 33 5 Hp Motor With Motor Starter Three Phase Submersible Pump 34 1 Hp Motor Open Well 35 Cable 4Mm 36 Cable 6Mm 37 Water Tank – Isi Double Layer - 200 Lit. 38 Water Tank – Isi Double Layer - 500 Lit. 39 Water Tank – Isi Double Layer - 1000 Lit. 40 Upvc Pipe 41 ½ Inch 42 ¾ Inch 43 1 Inch 44 2 Inch 45 Pvc Drain Pipe 46 2 Inch 47 4 Inches 48 Upvc Socket 49 ½ Inch 50 ¾ Inch 51 1 Inch 52 2 Inch 53 Upvc Elbow 54 ½ Inch 55 ¾ Inch 56 1 Inch 57 2 Inch 58 Upvc Tee 59 ½ Inch 60 ¾ Inch 61 1 Inch 62 2 Inch 63 Upvc Coupling 64 ½ Inch 65 ¾ Inch 66 1 Inch 67 2 Inch 68 Upvc Union 69 ½ Inch 70 ¾ Inch 71 1 Inch 72 2 Inch 73 Upvc Ball Valve 74 ½ Inch 75 ¾ Inch 76 1 Inch 77 2 Inch 78 Upvc Tank Nipple 79 ½ Inch 80 ¾ Inch 81 1 Inch 82 2 Inch 83 Upvc Brass Tee 84 ½ Inch 85 ¾ Inch 86 1 Inch 87 2 Inch 88 Cross 89 ½ Inch 90 ¾ Inch 91 1 Inch 92 2 Inch 93 Gi Pipes For Water Service Lines (Per Nos) 94 Indian Toilet Seat Isi Mark 95 Western Toilet Seat Isi Mark 96 Wash Basin (Ceramic/Vitreous) Isi Mark 97 Stainless Steel Sink Isi Mark 98 Brass Handle Valve ½ Inch 99 Brass Handle Valve 1 Inch 100 Nal Toti (Short Body Cock) 101 Long Body Cock 102 Shower 103 Teplon Tape (10) Mtr) 104 Solvent 105 Cider 106 Clips 107 Overbend 108 Reducer 109 1- 1.0 Mm Copper Wire 110 2- 1.5 Mm Copper Wire 111 3- 2.5 Mm Copper Wire 112 4- 4.0 Mm Copper Wire 113 Pvc Conduit Pipe ¾\ 114 Pvc Conduit Pipe 1\ 115 Pvc Batten ¾\ 116 Pvc Pipe 1\ 117 Pvc Saddle ¾\ 118 Pvc Saddle 1\ 119 Batten Clip 120 Elbow 121 Coupling 122 Pvc Box (3X3) 123 Pvc Box (4X3) 124 Pvc Box (5X3) 125 Pvc Box (8X3) 126 Pvc Box (8X6) 127 Modular Sheet (3X3) 128 Modular Sheet (4X3) 129 Modular Sheet (5X3) 130 Modular Sheet (8X3) 131 Modular Sheet (8X6) 132 Mcb Box 12 Way 133 Mcb Box 12/32 Amp 134 Ceiling Fans (Per Nos) 135 Plugs And Socket 6/16 Amp (Per Nos) 136 Switch 6/16 Amp (Per Nos) 137 Conduits (Per Nose) 138 Exhaust Fan (Per Nose) 139 Ceiling Fan Regulator 5 Step 140 Blinker 141 Electrical Insulation Tape 142 Bulb Holder 143 Dp Switch 144 Fan Box 145 Junction Box 146 Hdpe Pipe 1 Inch Diameter 147 Hdpe Pipe 2” Inch Diameter 148 Nylon Rope 16 Mm 149 Nylon Rope 8 Mm 150 Aluminum Section (Door/Window) Isi Marked Sliding Window—Three-Track—Complete With Aluminum Frame And Textured Glass / Mosquito Mesh (Steel Mesh) 151 Door/Window Frames (Made Of Poly Pvc) With Pre-Drilled Holes (3 Ft X 6 Ft) 152 Door/Window Frames (Made Of Poly Pvc) With Pre-Drilled Holes (3.5 Ft X 6 Ft) 153 Door/Window Frames (Made Of Iron) With Pre-Drilled Holes (3 Ft X 6 Ft) 154 Door/Window Frames (Made Of Iron) With Pre-Drilled Holes (3.5 Ft X 6 Ft) 155 Fabrication Work (Including Welding): Fabrication Using Isi-Marked Iron Grills, Angles, And Square Rods—(For Windows, Ventilators, Gates, Etc.) 156 Laminated Flush Door Shutters (Thickness: 30 Mm)—Complete With Handle, L-Drop, Latch, Door Stopper, And Hinges 157 Membrane Door (Waterproof, Isi Marked)—Complete With Handle, L-Drop, Latch, Door Stopper, And Hinges; Shutter D1: (3’1” X 6’10”), Shutter D2: (2’4” X 6’10”) 158 Chemical Door (Waterproof, Isi Marked)—Complete With Handle, L-Drop, Latch, Door Stopper, And Hinges; Shutter D1: (3’1” X 6’10”), Shutter D2: (2’4” X 6’10”) 159 Square Pipe (2” Inch) G.I. Galvanized Iron 160 Hydraulic Paving Blocks, 40 Mm (Per Piece) (Coloured & Polished) 161 Hydraulic Paving Blocks, 60 Mm (Per Piece) (Coloured & Polished) 162 Hydraulic Paving Blocks, 80 Mm (Per Piece) (Coloured & Polished) 163 Iron Main Gate For Plantation Site — Painted In Departmental Colors (With Primer & Paint), Including Fittings (12 X 06 Feet) 164 Iron Signboard For Plantation Site — Including Painting & Lettering (03 X 05 Feet) (In Departmental Colors) (With Primer & Paint) 165 Kota Stone 166 Granite Stone 167 M-Sand Send Feedback Use The Arrows To See The Full Translation.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 14
Madhya Pradesh View Result →
2.
Rural Development #11492620 AOC
Bids Are invited for Supply Of Blue Star Water Cooler Storage Capacity 150 Ltr Cooling Capacity 150 Ltr Complete In All Respects - Supply And Installation , Supply Of V Guard Stabilizer 5 Kva Automatic Copper Winding Input Range 90 240 Volt - Supply And Installation , Supply And Installation Of Sintex Or Equivalent Hdpe Seamless Water Tank - Supply And Installation , Colour Painting Of Complete Structure - Supply And Installation , Supply And Fixing Of Stainless Steel Waste Water Collection Tray - Supply And Installation , Plumbing And Fittings Including Pipes Elbows Tees Crosses And Other Accessories As Required - Supply And Installation , Water Supply Pipeline Approx 3 Metres - Supply And Installation , Comprehensive Maintenance Charges For One Year - Supply And Installation , Electrical Wiring Point For Water Cooler Including Main Switches And Required Materials - Supply And Installation , Safety Locking Arrangement - Supply And Installation , Providing And Fixing Retro Reflective Sheet On Front Left And Right Sides - Supply And Installation , Transportation Charges - Providing , Fabrication Installation And Framing Of Steel Structure Including Loading Unloading - Providing , Loading And Unloading Charges Of Ms Structure Water Cooler And Other Materials - Providing , Labour Charges For Fitting And Grouting Of Safety Cover - Providing , Earthing Work Complete With All Materials And Labour As Per Pwd Specifications - Providing Total Quantity : 33
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 4
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 4
Uttar Pradesh View Result →
5.
Rural Development #11481883 AOC
Tender For Annual Plan-Kuzhimanna Grama Panchayat Installation Of Mini Mast Lights-So315/26-General Electrical Work - wiring 2 90.15.1.1:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters 3 90.15.4.8:Supply Conveyance, installation, testing and commissioning of 120W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 4 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. 5 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). 6 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels 7 90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm 8 OD257774/2025-2026:SupplyandfixingoffollowingsizesofCorrugated PVC flexible conduit alongwithaccessoriesin surface/recess of proposed pole andmakinggoodthesameincaseofrecessed conduit as required 25 mm Corrugated PVC flexible conduit 9 1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm 10 OD257790/2025-2026:Supply,installation,testing and commissioning ofDigital time swtch 40A, 2pole , AC1 rated power contactor with 1NO+1NC auxiliary contacts with AC coil and 24 Hours timer for operating automatic ON-OFF function suitable for single phase supply 11 2.21:Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 12 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 13 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole 14 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 15 OD257771/2025-2026:Supply and Fixing of 1P+N,40KA,1 module surge protector on existing MCB DB/enclosure/Meter Board etc and giving connection as required. (Schneider A9L40500 or equivalent) 16 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 17 OD257773/2025-2026:5 mm X 3 mm G.I. strip earth lead Supplying and Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate 18 OD257775/2025-2026:Supply and installation of dust and vermin proof, 3 Phase Syntax Meter Board( GS-MB-5345-NF ] and to fix KSEB meters, fuse units, CT etc as required including fixing it on wall, making good the damages colour washing etc. as required 19 OD257780/2025-2026:Supplying and Fixing DIN rail inside the existing MCB DB/ Panel/Meter board etc 20 OD257777/2025-2026:Supplying and fixing32 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board 21 OD257781/2025-2026:Supplying and fixing32A, HRC Fuse with HRC Fuse link with connections, in existing meter board 22 OD257778/2025-2026:Supplying and fixing of following sizes oflight class PVC conduit along with accessories in surface/ recess including cutting the wall/ground and making good the same in case of recessed conduit as required as service pipe 23 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board 24 OD257875/2025-2026:Supply, Providing and fixing Granite of any colour and shade for Name board, of required size laid over base of cement mortar 1:4 (1 Cement : 4 Coarse sand), including all charges etc. complete all, levels, including lettering and fixingetc as required at site. 25 OD257779/2025-2026:Charges for procurement, preparation and submission of application for availing single/three phase KSEB service connection with necessary Sketch, Test and completion report, etc. including necessary liaison work as required
Contract Date: Jul 01, 2026 Contract Value : 1.14 Lakh
Local Bodies No of Bidders 2
6.
Power #11466147 Price Bid
Tender For Under 11 Kv & Lt Vertical, Bareilly Repair Work Under O&M Item For Damage Caused By Storm/Hurricane/Accident/Other Special Reasons. (Running Contract)=- 1 The Work Of Delivering Following Material From The Departmental Store Center To The Site In Which Includes Loading And Unloading On Both Sides. (Distance 0 To 50 Km) 2 Pcc Pole 11 Mtr. Long 3 Stp Pole 09 Mtr. Long 4 Pcc Pole 8.5 Mtr. Long 5 Acsr Weasel Conductor 6 Acsr Rabbit Conductor 7 Acsr Raccoon Conductor 8 A.B Cable (3X120 Sqmm) 9 A.B Cable (3X95 Sqmm) 10 A.B Cable (3X50 Sqmm) 11 11 Kv Cross Arm 12 11 Kv Pin Insulator With Pin 13 11 Kv Disc Insulator 14 11 Kv Disc Fitting 15 Stay Set Complete 16 Top Channel For 11 Kv 17 Guarding Angle For 11 Kv 18 T-Off Channel For 11 Kv 19 G.I Wire 20 Lt Distribution Box (03 Phase) 21 Complete Work Of Installing The Electrical Material Received From The Store Center At The Sites As Per Respo Norms. 22 Work Of Fixing/Installing Single Pole Of The Pcc Pole (8.5 Meter) Installed At The Site Support With Proper Alignment & Upto Depth Of One Sixth Of Length Of Pole With Proper Fabrication As Per Respo Standards. Which Includes Installation Of All Accessories Like Pin/Disk Insulator, Angle Channel Etc. And Decentralized Material Will Be Payable By The Contractor/Firm. 23 Work Of Fixing/Installing Double Pole Of The Pcc Pole (11 Meter) Installed At The Site Support With Proper Alignment & Upto Depth Of One Sixth Of Length Of Pole With Proper Fabrication As Per Respo Standards. Which Includes Installation Of All Accessories Like Pin/Disk Insulator, Angle Channel Etc. And Decentralized Material Will Be Payable By The Contractor/Firm. 24 Work Of Fixing/Installing Single Pole Of The Stp Pole(9/ Meter) Installed At The Site Support With Proper Alignment & Upto Depth Of One Sixth Of Length Of Pole With Proper Fabrication As Per Respo Standards. Which Includes Installation Of All Accessories Like Pin/Disk Insulator, Angle Channel Etc. And Decentralized Material Will Be Payable By The Contractor/Firm. 25 Complete Work Of Laying/Installing /Stringing Acsr Weasel Conductor On The Established Electric Poles Installed As Per Respo Norms. 26 Complete Work Of Laying/Installing /Stringing Acsr Rebit Conductor On The Established Electric Poles Installed As Per Respo Norms. 27 Complete Work Of Laying/Installing /Stringing Acsr Raccoon Conductor On The Established Electric Poles Installed As Per Respo Norms. 28 Stringing & Sagging Of Ab Cable (3X120) Sqmm. As Per Respo Norms . 29 Stringing & Sagging Of Ab Cable (3X95) Sqmm. As Per Respo Norms . 30 Stringing & Sagging Of Ab Cable (3X50) Sqmm. As Per Respo Norms . 31 Complete Work Of Re-Sagging / Tightening The Loose Line & Re-Height The Weasel/Rabit/ Racoon Conductor Line At The Site On The Established Electric Poles Installed As Per Respo Norms. 32 Fixing Of 11 Kv Cross Arm As Per Reso Norms . 33 Fixing Of 11 Kv Pin Insulator With Pin As Per Reso Norms . 34 Fixing Of 11 Kv Disc Insulator As Per Reso Norms . 35 Fixing Of 11 Kv Disc Fitting As Per Reso Norms . 36 Fixing Of T-Off Channel For 11 Kv As Per Reso Norms . 37 Fixing Of Top Channel For 11 Kv 38 Complete Work Of Installation Of Stay Set Complete With Concreting On Established Double Pole & Single Pole Of Line As Per The Respo Standards. 39 Complete Work Of Cutting And Pruning The Branches Of Trees Standing Between The Lt Line / 11 Kv Line/D.T/ ,D/Pole Installed And Shifting Place/Route. 40 Guarding Work Of 11 Kv Lines Including Work Mounting Of Guarding Angle And Stringing Of Guarding Wire After Binding Of String, Complete In All Respect Alongwith Providing And Fixing Of Eye Bolts . 41 Work Of Straightening Of Tilted St Poles And Work Of Repairing Of Damaged St Pole(9/11/13 Meter ) At The Bottom By Providing Fixing 03 Nos. Angel Pieces Of Size 50X506Mm Of 75 C.M. Alongwith Grouting With Plinth Of St Poles With 1:4:8 Mixture In Size (450X450X1500Mm.) Including Cost Of Cement/Bb & Sand Required As Per Respo Norms. 42 Chemical Earthing Of Distribution T/F As Per Respo Norms.( All Material Will Be Arranged By The Contractor At His Own Cost) 43 Installation Of Lt Distribution Box (03 Phase) Along With Making All Connections As Per Respo Norms. 44 Supply & Fixing Of Following Materials. 45 Al Lug ( 240 Mm2 Cable). 46 Al Lug ( 400 Mm2 Cable). 47 Al Lug ( 630 Mm2 Cable).
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Uttar Pradesh View Result →
7.
Coal and Mines #11461546 AOC
Comprehensive annual maintenance contract For Instant Ash Measuring Furnace For 2 Years Period At Various Ocps, Chps & Quality Control Labs Of Sccl-Reg--1. M.S. Bolts & nuts 2. Rivets, washers & screws 3. Dog nails 4. Fish plates, Nuts & bolts for fish plates 5. Belt jointing pins 6. Cable hooks and signal hooks 7. Belt conveyor rollers 8. Belt sections 9. Resin Capsules 10. Cement Capsules 11. GI canisters 12. Blasting Gallery – Spacers 13. Radiator repairs 14. Repairs and rewinding of motors of AC & DC 15. Repairs / rewinding of Transformers (Welding / lighting/ power) 16. GI wire 17. Wire Mesh for long-wall salvage 18. Manufacturing of supply of Electrical coils for AC motors up to 6.6 KV grade and Transformer coils up to 33 KV grade 19. Repairs of rotors for electric motor 20. Lighting cable 21. Steel chock manufacturing 22. House wiring 23. All types of fan repairs 24. Shovel bucket welding 25. Repairs of pumps 26. Couplings manufacturing 27. Special steel and alloy castings (Tooth points, track pads, Mn steel casting) 28. Manufacturing of fly ash bricks. (Not to be manufactured at stores site. It shall be at their own site). 29. Manufacturing of pump components (spares). 30. Transformer oil filtration 31. Reconditioning of drill bits and drill rods 32. Vulcanizing the old Trailing cables of drill machines, SDLs, LHDs, etc. (work should be carried out at the respective mine premises). 33. Manufacturing of earth clams, G.I flats, G.I bolts and nuts. 34. Manufacturing of earth pit components and erection. 35. Crimping of hydraulic hoses. 36. Repairs to hydraulic pumps, motors, control valves and other related components 37. Refurbishing of LT & HT switches with OEM spares including testing. 38. Manufacturing / repairs of slip rings & D-contacts. 39. Furniture repairs i.e., cane chairs, table, almirahs, etc. 40. Repairs to wet grinders, water purifiers, and water coolers 41. Manufacturing of coupling bolts of all sizes 42. Fabrication of OHT line components like cross arms, clamps, stay wires, cross brassings, base plates etc. 43. Manufacturing of haulage rope drum rollers. 44. All sizes of Ventilation doors
Contract Date: Ref. Documents Contract Value : 23.52 Lakh
Government Departments No of Bidders 1
8.
Civil Aviation #11458391 Technical Bid
Tender for Rate Contract For Miscellaneous Works In Technology & Innovation , Supply Of Telephone Line Cord , Supply Of Telephone Coil Cord/ Handset Cord , Telephone Handset With Clip, Hands Free Speaker With Microphone With 1 Year Warranty From Supply Date , Sip Telephone Handset With Clip, Hands Free Speaker With Microphone With 1 Year Warranty From Supply Date , Supply Of Rj 11 Socket Shutter Type With Back Box And Face Plate , Installation Of Rj 11 Socket Shutter Type With Back Box And Face Plate , Supply Of Rj 11 Connector For Line Cord , Installation Of Rj 11 Connector For Line Cord , Supply Of Rj 11 Connector For Handset Cord , Installation Of Rj 11 Connector For Handset Cord , Supply Of 10 Pair Krone Module , Installation And Commissioning Of 10 Pair Krone Module , Supply Of 10 Pair Telephone Db , Installation And Commissioning Of 10 Pair Telephone Db , Supply Of 20 Pair Telephone Db , Installation And Commissioning Of 20 Pair Telephone Db , Supply Of 50 Pair Telephone Db , Installation And Commissioning Of 50 Pair Telephone Db , Supply Of 100 Pair Telephone Db , Installation And Commissioning Of 100 Pair Telephone Db , Supply Of 200 Pair Telephone Db , Installation And Commissioning Of 200 Pair Telephone Db , Supply Of 5 Pair Pijf Armoured Telephone Cabling , Laying And Commissioning Of 5 Pair Pijf Armoured Telephone Cabling , Supply Of 10 Pair Pijf Armoured Telephone Cabling , Laying And Commissioning Of 10 Pair Pijf Armoured Telephone Cabling , Supply Of 20 Pair Pijf Armoured Telephone Cabling , Laying And Commissioning Of20 Pair Pijf Armoured Telephone Cabling , Supply Of 50 Pair Pijf Armoured Telephone Cabling , Laying And Commissioning Of 50 Pair Pijf Armoured Telephone Cabling , Supply Of 100 Pair Pijf Armoured Telephone Cabling , Laying And Commissioning Of 100 Pair Pijf Armoured Telephone Cabling , Supply Of 5 Pair Pijf Unarmoured Telephone Cabling , Laying And Commissioning Of 5 Pair Pijf Unarmoured Telephone Cabling , Supply Of 10 Pair Pijf Unarmoured Telephone Cabling , Laying And Commissioning Of 10 Pair Pijf Unarmoured Telephone Cabling , Supply Of 20 Pair Pijf Unarmoured Telephone Cabling , Laying And Commissioning Of 20 Pair Pijf Unarmoured Telephone Cabling , Supply Of 50 Pair Pijf Unarmoured Telephone Cabling , Laying And Commissioning Of 50 Pair Pijf Unarmoured Telephone Cabling , Supply Of Drop Wire , Laying And Commissioning Of Drop Wire , Supply Of Jumper Wire , Supply Of Single Pair Cable (Line Cord Cable) , Laying And Commissioning Of Single Pair Cable (Line Cord Cable) , Supply Of 3 Pair Pvc Unarmoured Telephone Cabling , Laying And Commissioning Of 3 Pair Pvc Unarmoured Telephone Cabling , Supply Of 5 Pair Pvc Unarmoured Telephone Cabling , Laying And Commissioning Of 5 Pair Pvc Unarmoured Telephone Cabling , Supply Of 10 Pair Pvc Unarmoured Telephone Cabling , Laying And Commissioning Of 10 Pair Pvc Unarmoured Telephone Cabling , Supply Of 20 Pair Pvc Unarmoured Telephone Cabling , Laying And Commissioning Of 20 Pair Pvc Unarmoured Telephone Cabling , Cable Termination , Supply Of 10 Pair Cable Joint Kit Including All Accessories, Kit Etc , Labour For 10 Pair Cable Joint Work , Supply Of 20 Pair Cable Joint Kit Including All Accessories, Kit Etc , Labour For 20 Pair Cable Joint Work , Supply Of 50 Pair Cable Joint Kit Including All Accessories, Kit Etc , Labour For 50 Pair Cable Joint Work , Supply Of 100 Pair Cable Joint Kit Including All Accessories, Kit Etc , Labour For 100 Pair Cable Joint Work , Supply Of 20 Mm Pvc Conduit Including Accessories Like Bend, Coupling, Elbo, Round Box Etc Required For Proper Cabling, Routing And Termination. , Laying And Commissioning Of 20 Mm Pvc Conduit Including Accessories Like Bend, Coupling, Elbo, Round Box Etc Required For Proper Cabling, Routing And Termination. , Supply Of 25 Mm Pvc Conduit Including Accessories Like Bend, Coupling, Elbo, Round Box Etc Required For Proper Cabling, Routing And Termination. , Laying And Commissioning Of 25 Mm Pvc Conduit Including Accessories Like Bend, Coupling, Elbo, Round Box Etc Required For Proper Cabling, Routing And Termination. , Supply Of 32 Mm Pvc Conduit Including Accessories Like Bend, Coupling, Elbo, Round Box Etc Required For Proper Cabling, Routing And Termination. , Laying And Commissioning Of 32 Mm Pvc Conduit Including Accessories Like Bend, Coupling, Elbo, Round Box Etc Required For Proper Cabling, Routing And Termination. , Supply Of 20 Mm Casing And Capping , Laying And Commissioning Of 20 Mm Casing And Capping , Supply Of 25 Mm Casing And Capping , Laying And Commissioning Of 25 Mm Casing And Capping , Supply Of 32/40 Mm Casing And Capping , Laying And Commissioning Of 32/40 Mm Casing And Capping , Supply Of 100 X 50 Mm Cable Manager , Laying And Commissioning Of100 X 50 Mm Cable Manager , Supply Of 50 X 50 Mm Cable Manager , Laying And Commissioning Of 50 X 50 Mm Cable Manager , Supply Of 50 X 50 Mm Slotted Cable Manager , Laying And Commissioning Of 50 X 50 Mm Slotted Cable Manager , Supply Of Pvc/Cast Iron Cable Route Marker With 10 Cm X 10 Cm X 5 Mm Thick. Plate With Inscription Thereon, Bolted/Welded To 25 Mm X 25 Mm X 6 Mm Angle Iron, 60 Cm Long And Fixing The Same In Ground As Required. , Installation Of Pvc/Cast Iron Cable Route Marker With 10 Cm X 10 Cm X 5 Mm Thick. Plate With Inscription Thereon, Bolted/Welded To 25 Mm X 25 Mm X 6 Mm Angle Iron, 60 Cm Long And Fixing The Same In Ground As Required. , Supply Of 4 Dia Class B Gi Pipe , Laying Of 4 Dia Class B Gi Pipe , Supply Of 2 Dia Class B Gi Pipe , Laying Of 2 Dia Class B Gi Pipe , Supply Of 1 Dia Class B Gi Pipe , Laying Of 1 Dia Class B Gi Pipe , Excavation In Soil Upto 60Cms Depth And Upto 30Cms Width And Sand /Quarry Dust Cushioning, Brick Laying, Protective Covering And Back Filling The Trench Etc As Required. , Excavation In Road/Concrete Upto 30 Cms Depth And Upto 30Cms Width And Sand /Quarry Dust Cushioning, Brick Laying, Protective Covering And Back Filling The Trench In Good Condition With Concretre Etc As Required. , Wall Chipping, Cement Filling, Putty Finish And Painting For 32 Mm Pvc Conduit. , Concrete Floor Chipping, Cement Filling, Putty Finish And Painting For 32 Mm Pvc Conduit. , Supply Of Cat 6 24 Port Patch Panel , Installation Of Cat 6 24 Port Patch Panel , Supply Of Cat 6 Io (Single Port) With Face Plate, Io And Back Box , Installation Of Cat 6 Io (Single Port) With Face Plate, Io And Back Box , Supply Of Cat 6 Io (Dual Port) With Face Plate, Dual Io And Back Box , Installation Of Cat 6 Io (Dual Port) With Face Plate, Dual Io And Back Box , Concealed Installation Of Cat 6 Io (Dual Port) With Face Plate, Dual Io And Back Box Including Chipping, Cement Filing, Putty Finish Etc , Supply Of Cat 6 Patch Cord 1 Metre , Installation Of Cat 6 Patch Cord 1 Metre , Supply Of Cat 6 Patch Cord 2 Metre , Installation Of Cat 6 Patch Cord 2 Metre , Supply Of Cat 6 Patch Cord 3 Metre , Installation Of Cat 6 Patch Cord 3 Metre , Supply Of 12 Port Fibre Optic Patch Panel - Liu , Installation Of 12 Port Fibre Optic Patch Panel - Liu With Accessories , Supply Of 24 Port Fibre Optic Patch Panel - Liu , Installation Of 24 Port Fibre Optic Patch Panel - Liu , Supply Of Sc-Sc Sm Of Patch Cord 3 Metre , Installation Of Sc-Sc Sm Of Patch Cord 3 Metre , Supply Of Sc-Sc Sm Of Patch Cord 5 Metre , Installation Of Sc-Sc Sm Of Patch Cord 5 Metre , Supply Of Sc-Sc Sm Of Patch Cord 10 Metre , Installation Of Sc-Sc Sm Of Patch Cord 10 Metre , Supply Of Sc-Lc Sm Of Patch Cord 3 Metre , Installation Of Sc-Lc Sm Of Patch Cord 3 Metre , Supply Of Sc-Lc Sm Of Patch Cord 5 Metre , Installation Of Sc-Lc Sm Of Patch Cord 5 Metre , Supply Of Sc-Lc Sm Of Patch Cord 10 Metre , Installation Of Sc-Lc Sm Of Patch Cord 10 Metre , Supply Of Lc-Lc Sm Of Patch Cord 3 Metre , Installation Of Lc-Lc Sm Of Patch Cord 3 Metre , Supply Of Lc-Lc Sm Of Patch Cord 5 Metre , Installation Of Lc-Lc Sm Of Patch Cord 5 Metre , Supply Of Lc-Lc Sm Of Patch Cord 10 Metre , Installation Of Lc-Lc Sm Of Patch Cord 10 Metre , Supply Of Sc-Sc Sm Of Patch Cord 1 Metre , Installation Of Sc-Sc Sm Of Patch Cord 1 Metre , Supply Of Sc-Lc Sm Of Patch Cord 1 Metre , Installation Of Sc-Lc Sm Of Patch Cord 1 Metre , Supply Of Lc-Lc Sm Of Patch Cord 1 Metre , Installation Of Lc-Lc Sm Of Patch Cord 1 Metre , Supply Of Rj 45 Connector , Installation Of Rj 45 Connector , 1.5 Meter Vga Cable , 3.0 Meter Vga Cable , 5.0 Meter Vga Cable , 10 Meter Vga Cable , 15 Meter Vga Cable , 20 Meter Vga Cable , 1.5 Meter 28Awg Hdmi Cable , 3.0 Meter 28Awg Hdmi Cable , 5.0 Meter 28Awg Hdmi Cable , 10 Meter 28Awg Hdmi Cable , 15 Meter 26Awg Hdmi Cable , 20 Meter 26Awg Hdmi Cable , Supply Of 10/100 Media Converter , Installation Of 10/100 Media Converter , Supply Of 10/100/1000 Media Converter , Installation Of 10/100/1000 Media Converter , Supply Of 8 Port Gigabit Switch , Installation Of 8 Port Gigabit Switch , Supply Of Cat 6 Utp Cabling , Laying Of Cat 6 Utp Cabling Through Conduits , Supply Of Shielded Cat 6A Cabling , Laying Of Shielded Cat 6A Cabling Through Conduits , Supply Of Rg 6 Cabling , Laying Of Rg 6 Cabling Through Conduits , Supply Of Rg 11 Cabling , Laying Of Rg 11 Cabling Through Conduits , Supply Of Bnc With F Connector , Installation Of Bnc With F Connector , Supply Of 24 Core Smf Fibre Optic Cable (Outdoor) Through Conduits, Walls, Trays, Underground Trenches Etc , Laying Of 24 Core Smf Fibre Optic Cable (Outdoor) Through Conduits, Walls, Trays, Underground Trenches Etc , Supply Of 12 Core Smf Fibre Optic Cable (Outdoor) , Laying Of 12 Core Smf Fibre Optic Cable (Outdoor) Through Conduits, Walls, Trays, Underground Trenches Etc , Supply Of 6 Core Smf Fibre Optic Cable (Outdoor) , Laying Of 6 Core Smf Fibre Optic Cable (Outdoor) Through Conduits, Walls, Trays, Underground Trenches Etc , Supply Of Single Mode Ofc Pig Tail , Splicing, Testing And Test Report Submission Of Single Mode Ofc Pig Tail , Supply Of Outdoor Splicing Enclosure , Installation Of Outdoor Splicing Enclosure , Otdr Usage Charges , Supply Of 40 Mm Hdpe Pipe , Laying Of 40 Mmhdpe Pipe In Soil,Racks,Trays, Built In Trenches, Including Cost Of Clamps Screws And Other Acessories ,But Excluding Cost Of Excavation And Backfilling. , Supply Of 32 Mm Hdpe Pipe , Laying Of 32 Mmhdpe Pipe In Soil,Racks,Trays, Built In Trenches, Including Cost Of Clamps Screws And Other Acessories ,But Excluding Cost Of Excavation And Backfilling. , Supply Of 25 Mm Hdpe Pipe , Laying Of 25 Mm Hdpe Pipe In Soil,Racks,Trays, Built In Trenches, Including Cost Of Clamps Screwsand Other Acessories ,But Excluding Cost Of Excavation And Backfilling. , Laying Of Telephone Cables/Hd Pipes Up To 32 Mm Through Closed Concrete Trenches, Covered With Concrete Slab/ Grill, With Proper Clamping And Fixing , Supply ( Fabricating Ladder Type Cable Tray Using Ms Items Such As Tees/ Angles/ Channels/Strips Etc.) , Installing ( Fabricating Ladder Type Cable Tray Using Ms Items Such As Tees/ Angles/ Channels/Strips Etc.) The Same With Supports Etc On Floor/ Ceiling/ Wall Including Necessary Civil Work Such As Grouting, Finishing Etc. And Painting With Two Coating Of Primer And Weather Proof Paint , Supply Of Gi Coated 200 Mm X 50 Mm X 2 Mm Perforated Tray , Installation Of Gi Coated 200 Mm X 50 Mm X 2 Mm Perforated Tray On The Wall, Pillar With Accessories , Supply Of 304 Ss Fixtures As Per Requirement At Site , Fabrication And Installation Of 304 Ss Fixtures As Per Requirement At Site , Underground Concrete Foundation With Reinforcement For Fixing Outdoor Poles, Outdoor Racks Etc Including Digging, Back Filling The Soil And Finishing To Original Condition , Supply Of 6A 1P Mcb , Installation Of 6A 1P Mcb , Supply Of 10A 1P Mcb , Installation Of 10A 1P Mcb , Supply Of 16A 1P Mcb , Installation Of 16A 1P Mcb , Supply Of 40A 1P Mcb , Installation Of 40A 1P Mcb , Supply Of 40A 2P Mcb , Installation Of 40A 2P Mcb , Supply Of 63A 4P Mcb , Installation Of 63A 4P Mcb , Supply Of 40A 2P 100Ma Rccb , Installation Of 40A 2P 100Ma Rccb , Supply Of 40A 2 Pole Isolator , Installation Of 40A 2 Pole Isolator , Supply Of 40A 4 Pole Isolator , Installation Of 40A 4 Pole Isolator , Supply Of 8 Way Db Double Door With Din Bar, Neutral And Earth Link , Installation Of 8 Way Db Double Door With Din Bar, Neutral And Earth Link , Supply Of 12 Way Db Double Door With Din Bar, Neutral And Earth Link , Installation Of 12 Way Db Double Door With Din Bar, Neutral And Earth Link , Supply Of 16 Way Db Double Door With Din Bar, Neutral And Earth Link , Installation Of 16 Way Db Double Door With Din Bar, Neutral And Earth Link , Supply Of Cu Power Cable 10 Sq Mm , Laying Of Cu Power Cable 10 Sq Mm , Supply Of Cu Power Cable 6 Sq Mm , Laying Of Cu Power Cable 6 Sq Mm , Supply Of Cu Power Cable 4 Sq Mm , Laying Of Cu Power Cable 4 Sq Mm , Supply Of Cu Power Cable 2.5Sq Mm , Laying Of Cu Power Cable 2.5Sq Mm , Supply Of Cu Power Cable 1.5 Sq Mm , Laying Of Cu Power Cable 1.5 Sq Mm , Supply Of Cu Power Cable 1.5 Sq Mm 3 Core , Laying Of Cu Power Cable 1.5 Sq Mm 3 Core , Supply Of 2 Core 2.5 Sq Mm Armoured Cu Cable , Laying Of 2 Core 2.5 Sq Mm Armoured Cu Cable , Supply Of 2 Core 2.5 Sq Mm Unarmoured Cu Cable , Laying Of 2 Core 2.5 Sq Mm Unarmoured Cu Cable , Supply Of 3 Core 2.5 Sq Mm Unarmoured Cu Cable , Laying Of 3 Core 2.5 Sq Mm Unarmoured Cu Cable , Supply Of Electrical Joining Kit 4 X 10 Sq Mm Al/Cu As Per Requirement At Site , Installation Of Electrical Joining Kit 4 X 10 Sq Mm Al/Cu As Per Requirement At Site , Supply Of Copper Lug No 10 Washer / Banana/ Battery Terminal , Fixing Of Copper Lug No 10 Washer / Banana/ Battery Terminal , Supply Of Copper Lug No 16 Washer / Banana/ Battery Terminal , Fixing Of Copper Lug No 16 Washer / Banana/ Battery Terminal , Supply Of Ferrule 1.5 Sq Mm (100 Nos Packet ,Same Letter) , Supply Of Ferrule 2.5 Sq Mm (100 Nos Packet ,Same Letter) , Supply Of Ferrule 4 Sq Mm (100 Nos Packet ,Same Letter) , Supply Of Ferrule 6 Sq Mm (100 Nos Packet ,Same Letter) , Supply Of 5A Power Socket, Ordinary, With 1 Switch 1 Socket With Back Box And Front Plate , Installation Of 5A Power Socket, Ordinary, With 1 Switch 1 Socket With Back Box And Front Plate , Supply Of 5A Power Socket, Ordinary, With 1 Switch 2 Socket With Back Box And Front Plate , Installation Of 5A Power Socket, Ordinary, With 1 Switch 2 Socket With Back Box And Front Plate , Supply Of 5A Power Socket, Ordinary, With 1 Switch 3 Socket With Back Box And Front Plate , Installation Of 5A Power Socket, Ordinary, With 1 Switch 3 Socket With Back Box And Front Plate , Supply Of 5A Power Socket, Ordinary, With 1 Switch 4 Socket With Back Box And Front Plate , Installation Of 5A Power Socket, Ordinary, With 1 Switch 4 Socket With Back Box And Front Plate , Supply Of 5A Power Socket, Modular, With 1 Switch 1 Socket With Back Box And Front Plate , Installation Of 5A Power Socket, Modular, With 1 Switch 1 Socket With Back Box And Front Plate , Supply Of 5A Power Socket, Modular, With 1 Switch 2 Socket With Back Box And Front Plate , Installation Of 5A Power Socket, Modular, With 1 Switch 2 Socket With Back Box And Front Plate , Supply Of 5A Power Socket, Modular, With 1 Switch 3 Socket With Back Box And Front Plate , Installation Of 5A Power Socket, Modular, With 1 Switch 3 Socket With Back Box And Front Plate , Supply Of 5A Power Socket, Modular, With 1 Switch 4 Socket With Back Box And Front Plate , Installation Of 5A Power Socket, Modular, With 1 Switch 4 Socket With Back Box And Front Plate , Supply Of 15A Power Socket, Ordinary, With 1 Switch 1 Socket With Back Box And Front Plate , Installation Of 15A Power Socket, Ordinary, With 1 Switch 1 Socket With Back Box And Front Plate , Supply Of 15A Power Socket, Modular, With 1 Switch 1 Socket With Back Box And Front Plate , Installation Of 15A Power Socket, Modular, With 1 Switch 1 Socket With Back Box And Front Plate , Supply Of 3 Pin Plug, 5A , Installation Of 3 Pin Plug, 5A , Supply Of 3 Pin Plug, 15A , Installation Of 3 Pin Plug, 15A , Supply Of 16A, 1P+N+E Iec 60309 Plug , Installation Of 16A, 1P+N+E Iec 60309 Plug , Supply Of 16A, 1P+N+E Iec 60309 Socket , Installation Of 16A, 1P+N+E Iec 60309 Socket , Supply Of 40A, 1P+N+E Iec 60309 Plug , Installation Of 40A, 1P+N+E Iec 60309 Plug , Supply Of 40A, 1P+N+E Iec 60309 Socket , Installation Of 40A, 1P+N+E Iec 60309 Socket , Supply Of 32A, 3P+N+E Iec 60309 Plug , Installation Of 32A, 3P+N+E Iec 60309 Plug , Supply Of 32A, 3P+N+E Iec 60309 Socket , Installation Of 32A, 3P+N+E Iec 60309 Socket , Supply Of 63A, 3P+N+E Iec 60309 Plug , Installation Of 63A, 3P+N+E Iec 60309 Plug , Supply Of 63A, 3P+N+E Iec 60309 Socket , Installation Of 63A, 3P+N+E Iec 60309 Socket , Supply Of 1 +Npe Surge Arrestor , Installation Of 1 +Npe Surge Arrestor , Supply Of 3 + Npe Surge Arrestor , Installation Of 3 + Npe Surge Arrestor , Supply And Providing Isi Plate Earthing As Per Is:3043 With 600X600x3 Mm Copper Plate With Required Length Of 50 Mm Dia B Class Gi Watering Pipe Extending To The Middle Of The Earth Plate , Installation Of Earthing Including Cost Of Excavation, Back Filling, Charcoal And Salt/ Equivalent Compound And Ci Cover, Masonry Enclosure And All Other Civil Works Etc. , Supply And Laying Of 25X3 Sq.Mm Copper Strip On Wall/ Ceiling/ Ground/ Surface/ Recess Etc As Required. , Supply And Laying Of 10Swg Copper In Ground/Surface/Recess Etc As Required. , Supply Of Earthing Material With 2 Metre Copper Rod Of 25 Mm Dia With Earthing Compound, 2 Ft X 2 Ft Brick Chamber With Gi Cover And Required Cable Connectors And Termination Of Incoming Cable/ Strip. , Installation With Earthing Compound, 2 Ft X 2 Ft Brick Chamber With Gi Cover And Required Cable Connectors And Termination Of Incoming Cable/ Strip , Supply Of 32 Tv With 1 Year Warranty From The Date Of Supply , Installation Of 32 Tv Including Replacement Of Old Tv , Supply Of 40-43 Commercial Display With 1 Year Warranty From The Date Of Supply , Installation Of 40-43 Commercial Display Including Replacement Of Old Tv , Supply Of 55 Commercial Display With 1 Year Warranty From The Date Of Supply , Installation Of 55 Commercial Display Including Replacement Of Old Tv , Supply Of 65 Commercial Display With 1 Year Warranty From The Date Of Supply , Installation Of 65 Commercial Display Including Replacement Of Old Tv , Supply Of Universal Wall Mount Stand For 32-55 Led Tv With Wall Mounting Accessories, Anchor Bolts Etc , Installation Of Universal Wall Mount Stand For 32-55 Led Tv With Wall Mounting Accessories, Anchor Bolts Etc , Supply Of Universal Wall Mount Vertically Tiltable Stand For 32-55 Led Tv With Wall Mounting Accessories, Anchor Bolts Etc , Installation Of Universal Wall Mount Vertically Tiltable Stand For 32-55 Led Tv With Wall Mounting Accessories, Anchor Bolts Etc , Supply Of 12V 7Ah Battery With Buy Back Of Old Battery, With 1 Year Warranty From The Date Of Supply With Buy Back Of Old Battery , Installation 12V 7Ah Battery , Supply Of 12V 18 Ah Battery With Buy Back Of Old Battery, With 1 Year Warranty From The Date Of Supplywith Buy Back Of Old Battery , Installation Of 12V 18 Ah Battery , Supply Of 12V 26 Ah Battery With Buy Back Of Old Battery, With 1 Year Warranty From The Date Of Supplywith Buy Back Of Old Battery , Installation Of 12V 26 Ah Battery , Supply Of 12V 42 Ah Battery With Buy Back Of Old Battery, With 1 Year Warranty From The Date Of Supplywith Buy Back Of Old Battery , Installation Of 12V 42 Ah Battery , Supply Of 12V 65 Ah Battery With Buy Back Of Old Battery, With 1 Year Warranty From The Date Of Supplywith Buy Back Of Old Battery , Installation Of 12V 65 Ah Battery , Providing A Site In-Charge / Team Leader , Providing A Site Supervisor , Providing A Technical Staff For Shift Duty , Supply Of Unskilled Labour For General Woks (Shifting And Loading Of Equipment & Accessories) , Supply Of Skilled Labour On Daily Wages For Telephone, Data And Electrical Works Including Installation Of Equipment, Cable Routing, Telephone, Data And Electrical Cable Terminations And Connectorisation Etc. , Supply Of 6U Rack As Per Technical Specification , Installation Of 6U Rack As Per Technical Specification On The Wall, Pillar With Accessories , Supply Of 9U Rack As Per Technical Specification , Installationof 9U Rack As Per Technical Specification On The Wall, Pillar With Accessories , Supply Of 12U Rack As Per Technical Specification , Installation Of 12U Rack As Per Technical Specification On The Wall, Pillar With Accessories , Supply Of 15U Rack As Per Technical Specification , Installation Of 15U Rack As Per Technical Specification On The Wall, Pillar With Accessories , Supply Of 22U Rack, 600 Width X 800 Mm Depth, As Per Technical Specification , Installation Of 22U Rack, 600 Width X 800 Mm Depth, As Per Technical Specification With Accessories , Supply Of 22U Outdoor Rack, 600 Width X 800 Mm Depth, As Per Technical Specification , Installation Of 22U Outdoor Rack, 600 Width X 800 Mm Depth, As Per Technical Specification With Accessories , Supply Of Thin Client As Per Technical Specification , Installation Of Thin Client , Supply Of Mobile (5G) With 4 G Ram, 64 Gb Rom , Supply Of External Hard Disk (5 Tb) , Supply Of Webcam(Full Hd 1080P) , Supply Of Hdmi Converter( Hdmi To Vga, Hdmi To Dp) , 600 Va Ups System With 1-Year Warranty , 1Kva Ups System(Offline) With 1-Year Warranty , 1Kva Ups System(Online) With 1-Year Warranty , Em Lock Full Set For A Single Door Along Emergency Switch & Exit Switch , Em Lock Full Set For A Double Door Along Emergency Switch & Exit Switch , Supply Of 40 A,4P,100Ma Reinforced Cement Concrete
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 4.14 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
22.
Housing Urban and Rular Development #11415087 Technical Bid
Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Indian Cables Ltd./ Polycab / repair renovation Cables / Finolex / Havells Cables. 35 Sqmm Size , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , -Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 105 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , -Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Clear Water Pump: Supplying, Erection, Testing And Commissioning Of Horizontal Motor Pumping Set For Clear Water Having Head As Per The Indicated Requirements Of Discharge In Lpm And Power Capacity In Bhp As Per Is Marked 8400 Lpm X 30.00 M Head (At Mbs) , Ns Item -Design, Construction, Erection And Commissioning Of 1 Ranneywell (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 30 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 1.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
23.
Power #11407886 AOC
Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Industry Unit; Power House Equipment; Service Provider - Deployment Of Qualified Safety Engineer For Ash Disposal System At Gorbi Mines Pit No. 03 , Deployment Of Qualified Supervisor For Ash Disposal System At Gorbi Mines Pit No. 03 , Deployment Of Skilled Worker (Mechanical) For Ash Disposal System At Gorbi Mines Pit No. 03 , Deployment Of Semi-Skilled Worker (Mechanical) For Ash Disposal System At Gorbi Mines Pit No. 03 , Deployment Of Unskilled Worker For Ash Disposal System At Gorbi Mines Pit No. 03 , Deployment Of Unskilled Worker For Housekeeping At Gorbi Mines Pit No. 03 , Deployment Of Sweeper At Gorbi Mines Pit No. 03 , Deployment Of Mining Manager At Gorbi Mines Pit No. 03 , Hiring Of Hydra For Ash Disposal System At Gorbi Mines Pit No. 03 , Hiring Of Tractor With Trolly For Ash Disposal System At Gorbi Mines Pit No. 03 , Hiring Of Jcb For Ash Disposal System At Gorbi Mines Pit No. 03 , Hiring Of Truck With Mounted Water Sprinkling System For Ash Disposal System At Gorbi Mines Pit No. 03 , Arrangement Of Water Filling For Truck With Mounted Water Sprinkling System , Oh Of Blower For Ash Disposal System At Gorbi Mines Pit No. 03 , Replacement Of Blower For Ash Disposal System At Gorbi Mines Pit No. 03 , Misc Fabrication Works For Ash Disposal System At Gorbi Mines Pit No. 03 , Deployment Of Highly Skilled Worker (Electrical) For Ash Disposal System At Gorbi Mines Pit No. 03 , Deployment Of Skilled Worker (Electrical) For Ash Disposal System At Gorbi Mines Pit No. 03
Contract Date: Ref. Documents Contract Value : 8.53 Lakh
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
24.
Defence #11359685 AOC
Bids Are invited for Customised Table Top For Coffee Or Tea Kettle Microwave Induction Cook Top Size 5 Ft 3Ft With Multi Drawers For Storage Of Utensils , Fabrication Of Customised Wall Mounted Storage Space 6Ft X 1.5Ft With 2 Stacks For Crockery And Other Utensils With 2 Stacks For Crockery , Customised Wall Mounted Display Case Of 6Ft X 1.5Ft Of Three Stacks With Glass Enclosures With Locking Arrangement , Customised 2Mm Thick Blackout Double Layered Zebra Blinds With Open Or Shut Mechanism , Wall Paneling Wit Charcoal Or Pvc Profiles , Anti Termite Hadr Material Wall Paneling , Light Emitting Diode 75 Inches Diagonally Visual Display , Customised Wooden Book Or Magazine Shelve , Laying Of Fine Finish Putty And Finishing With Royal Emulsion Coat , Laying Of Electrical Cales, Metal Boxes, Control Units And Sockets For Profile Illuminations, Hanging Illumination, Spot Illuminations And Diffusers And Other Necessary Power Related Materials , Customised Tough End Glass Enclosures With Shut And Close Hydraulic Mechanism And Other Accessories With Wood Wall Paneling Around The Enclosure , Customised Cushioned Seating Arrangemens With Fine Fabric Finish Seater , Customised Solid Teak Wood Table With Fine Polish Finish , Customised Step Design And Profile Weather Proof Ceiling Fabricaed With High Density Galvanized Channels And 12Mm Thick Gypsum Sheet , Fabrication Of Customised Wall Mounted Covering Arrangement For Network Switches With Door And Top Mounted Exhaust Fans Total Quantity : 2415
Contract Date: Ref. Documents Contract Value : 20.94 Lakh
Government Departments No of Bidders 7
Andhra Pradesh View Result →
25.
Water Resources and Irrigation #11342285 AOC
Amrut-Supply, Erecting And Commissioning Of Various Pump Sets, Other Necessary Equipment For 107 Mld Sewerage Treatment Plant At Muttathara-Supply, Erecting And Commissioning Of Various Pump Sets, Other Necessary Equipments For 107 Mld Sewerage Treatment Plant At Muttathara-Sewerage Work- 1 SUPPLY, ERECTING AND COMMISSIONING OF PUMP SETS 2 OD149149/2023-2024:Supply, Erecting and Commissioning of 75 HP non clog pump set for RAS (Head – Up to 20 M) 3 OD149154/2023-2024:Supply, Erection and Commissioning of 5 HP non clog pump set for WAS (Total Head :14 M ) 4 OD149153/2023-2024:Supply, Erecting and Commissioning of 5 HP centrifugal dewatering pump set for RAS 5 OD17699/2025-2026:Supply, Erecting and Commissioning of80 HP Submersible pump set for inlet(Head : Up to 20 M) 6 OD18102/2025-2026:Supply, installation, and commissioning of minimum 100 LPH RO water purifier of standard make with 304-grade stainless steel skid and housing, comprising multi-stage purification system including pre-filter, sediment filter, activated carbon filter, RO membrane, UV disinfection unit, auto-flush system, and mineral cartridge; suitable for continuous commercial use and delivering safe, high-quality drinking water. 7 OD18758/2025-2026:Supply of 10 HP portable submersible sludge pump, 3-phase, suitable for handling slurry and sewage, maximum head up to 20 meters, solid handling capacity up to 50 mm, abrasion-resistant impeller, thermal protection, 15 m power cable, and 30 meters of heavy-duty discharge hose (100 mm dia) with quick couplings. 8 Supply and installation soft starter and motorized chain pulley 9 OD149170/2023-2024:Supply of motorized chain pulley block with 3-ton lifting capacity and 10-meter lift height, featuring electric motorized operation with electromagnetic or disc brake system, pendant control for easy operation, limit switches for safety, and overload protection, conforming to IS/ISO standards. 10 OD16970/2025-2026:Supply and installation of soft starter for MCC unit ( For 60 HP motor XS4000,115A,M200-525VACC110/ 220VAC), MNX140 3P 240V CONTACTOR and SEMI CONDUCTOR FUSE 170M3015 11 OD18097/2025-2026:Supplying, fixing, and testing 50W LED hanging type well glass light, weatherproof (IP65) 12 OD18264/2025-2026:Supply and installation of 10-meter hot-dip galvanized double-arm octagonal street light pole with 2×120W LED luminaires, including internal wiring, weatherproof junction box, connections, and earthing. Complete with foundation bolts and RCC pedestal. Includes supply, erection, and commissioning 13 Installation of CCTV camera 14 OD16801/2025-2026:Supplying & fixing HIKVISION 5 MP Varifocal IP Bullet Camera CAMERA 15 OD16892/2025-2026:Supplying, fixing and commissioning 4MP IP DOME CAMERA 16 OD16891/2025-2026:Supplying, fixing and commissioning HIKVISION 4MP IP BULLET CAMERA 40M 17 OD16890/2025-2026:Supplying, fixing and commissioning HIKVISION 32CH NVR 18 OD16889/2025-2026:Supplying, fixing and commissioning 8 PORT POE SWITCH 19 OD16888/2025-2026:Supplying & fixing 6U RACK & ACCESSORIES 20 OD16887/2025-2026:Supplying & fixing 9U RACK& ACCESSORIES 21 OD16886/2025-2026:Supplying & fixing CAMERA BOX 22 OD16885/2025-2026:Supplying & fixing CAT6 CABLE & PIPING (including excavation) 23 OD16884/2025-2026: Supplying and fixing pole with all accessories. 24 OD16920/2025-2026:Supplying and fixing 55-inch, 4K, LED, Smart TV (Samsung/LG/Sony) 25 OD16919/2025-2026:Supplying & fixing RECEIVER & TRANSMITTER UNIT 26 OD16918/2025-2026:Supplying & fixing L & T EXTENSION 5MTR 27 OD16917/2025-2026:Supplying & fixing 5 PORT GIGABYTE SWITCH 28 OD16916/2025-2026:Supplying & fixing HDMI CABLE 3MTR 29 OD16915/2025-2026:Supplying & fixing RACK & PIPE ACCESSORIES, 30 OD16914/2025-2026:INSTALLATION CHARGE FOR CAMERA& NVR 31 OD16913/2025-2026:Supplying & installation of rack 32 New Road formation: Tarring inside STP compound 33 3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m 34 4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method 35 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 36 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. 37 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 38 OD18679/2025-2026:Providing 40mm premixed chipping carpet over BT surface with departmental broken stones after thoroughly cleaning the base with wire brushes, brooms and applying a priming coat of hot bitumen @2.50Kg/10m2 and spreading the hot premix of 0.32m3 of 24mm, 0.22m3 of 12mm departmental metal mixed with 22.08Kg of bitumen per 10m2, rolling to dense surface, then spreading the seal coat comprising of 0.09m3 of 6mm metal mixed with 8.64kg of bitumen per 10m2 and rolling again including cost of bitumen, fuel, hire charges machineries etc. complete excluding the cost of 24mm ,12mm ,6mm metal(Total usage of bitumen 33.22 Kg per 10m2) (I.R.C 3.4.2) 39 OD18716/2025-2026:Supplying and stacking 24mm hard blue granite broken stone in standard heaps-for measurement(IRC 3.2. 1.a) 40 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) 41 55.3:Supplying and stacking 6mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) 42 Infrastructure Improvement Works at STP 43 OD17712/2025-2026:Supply and installation of UV-resistant HDPE with 12mm mesh ( 2meter height) for durability. Support poles are galvanized iron pipes (2-inch dia, 6 ft height) for stability. Stainless steel clamps & UV-resistant plastic ties ensure secure fitting. Concrete footing with excavation and earthwork provides pole stability. Skilled labor ensures proper installation 44 OD17711/2025-2026:Supply and spray a non-toxic, bio-friendly herbicide or a selective herbicide, with an application rate of 5 to 10 liters per hectare, ensuring effective weed control over an area of 1 hectare. 45 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared 46 2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 47 4.2.5:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) 48 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 49 5.22.4:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHot rolled deformed bars 50 OD17710/2025-2026:Supply & installation of high-quality polyester sun control film with UV-blocking, heat resistance (99% UV, 60% heat rejection), 2–4 mil thickness, bubble-free installation, and 5-year warranty. 51 OD17709/2025-2026:Fire extinguishers (10L dry powder and 4.5kg CO₂) shall be installed as per IS: 2190 with inspection cards. Fire buckets with MS stands, safety posters, and caution notices in Malayalam and English shall be provided for compliance. 52 Providing roofing for DG, Inlet outdoor panels and mechanical screener 53 100.98.1009:Engaging Fitter ( grade 1). 54 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 55 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 56 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 57 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 58 50.12.1.1:Providing & fixing PVC corrugated roofing sheets of good quality up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8 mm dia G. I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 59 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 60 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 61 Replacement of leaking flanged pipes inside the inlet well 62 OD17790/2025-2026:Supply, conveyance, and fixing of 300mm double flanged DI K9 pipe, including scaffolding, fabrication if required (cutting, flange welding), and providing necessary fittings, nuts, bolts, rubber gaskets, and insertion rubber sheets for proper and safe installation at site. 63 OD17835/2025-2026:Dismantling existing 300 mm DI pipes carefully using crane/manual handling with all necessary safety measures, and stacking the removed materials within 50 meters as directed by the Engineer-in-Charge 64 Provision forEntry of Trucks from Rear Side of STP 65 15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar 66 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 67 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 68 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 69 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 70 50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 71 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. 72 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 73 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 74 13.82.1:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.One coat 75 10.26.3:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes 76 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work 77 Security room (4m x 3m) at back entrance of STP 78 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 79 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 80 50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 81 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 82 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 83 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. 84 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 85 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 86 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 87 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 88 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 89 OD17944/2025-2026:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including MS grill with suitable spacing and ISI marked M.S pressed butt hinges bright finished of required size with necessary locking arrangements. 90 OD17947/2025-2026:Electrical work including internal lighting, fan, switches, DB, concealed wiring, and one external LED light with pole/bracket for night visibility, complete with connections, fittings, and testing as per direction of Engineer-in-Charge. 91 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Contract Date: Jun 23, 2026 Contract Value : 2.52 Crore
Local Bodies No of Bidders 1
26.
Water Resources and Irrigation #11335994 Technical Bid
Tender for Repair To Pumping Machinery Of 5 Cusec Vt Pump Set Of Unit Iv Along With Extension Of Column Pipe And Other Allied Works At Lis Katal Batal. , The Job Involve Disconnecting The Electrical Connection Of Motor Of Unit Iv And Dismantling The Slip Ring Motor From The Ratchet Assembly By Way Of Decoupling The Required Coupling Nuts And Bolt. Lifting The Motor From Base Frame With The Help Of Existing Mono Rail And Chain Pulley Block, Then Keeping It Aside. Dismantling The Ratchet Assembly From The Discharge Head And Lifting It Aside. Dismantling The Delivery Line From The Discharge Head And Suction Column By Way Of Unscrewing The Required Nuts And Bolt. Lifting The Discharge Head And Keeping It Aide. Extracting Out The Column Suction Pipe, Line Shaft, Spider Guide One By One By Way Of Dismantling The Required Nut And Bolt And Unscrewing The Line Shaft From Each Socket, Then Finally Extracting Out The 2 Stage Vt Pump Of 5 Cusec Discharge, Head Load Carriage Of Pump, Line Shafts, Sleeves, Stuffing Box And Sockets Along With Discharge Head To Road Side Up To Loading Point With The Help Of Skilled Manual Labour And Then Loading Into A Mechanical Transport For Carrying To Work Shop For Repairs With The Help Of Crane/Tools, Tackles Using Manual Labour. Complete Job Includes Cost Of Labour, Carriage Charges And Hire Charges Of Tools And Tackles. Repair To Stuffing Box By Providing And Fitting Of New Bronze Bush As Per Sample To Required Size After Re Metalling, Finishing And Drilling Holes And Making Internal Threads On Stuffing Box As Per Requirement For Securing Studs. Repair To Top Shaft By Way Of Rebuilding With Machine Able Ss Electrode At Worn Out Portions And Then Threading And Making Key Way Of Required Size. Dismantling The 2 Stage Vt Pump By Way Of Cutting Of Rusted Bolts, Nuts And Studs And Separating The Discharge Bowl, Suction Bowl From Pump Body And Then Dismantling The Two Stage Pump To Extract The Damaged Impellers And Pump Shaft. Repairs To 05 Cusec Vt Pump By Way Of Providing/ Fitting Of Neck Ring Of Stainless Steel Material- 02 Nos. By Casting, Turning And Boring To The Required Size And Press Fitting The Same In The Pump Body Then Locking Properly. Repair To Pump Shaft By Way Of Welding Turning And Finishing To Required Size And Then Threading It And Making Of Key Way On Shaper To The Required Size. Repair To Ist And Iind Stage Impeller By Fabrication Of 1 No. Neck Ring Each For Impellers And Then Press Fitting It On The Impeller And Locking It Properly And Rebuilding The Worn Out Portion With Machine Able Ss Electrode And Turning, Machining It To Its Original Shape And Size. Repair To Stuffing Box By Providing And Fitting Of New Bronze Bush As Per Sample To Required Size After Metalling, Finishing And Drilling Holes And Making Internal Threads On Stuffing Box As Per Requirement. Repair To Top Shaft By Way Of Rebuilding With Machineable Ss Electrode At Worn Out Portions And Then Threading And Making Key Way On Shaper To The Required Size. Fabrication Of New Check Nut Of Given Size. Providing And Fitting Of New Ci Spider Guide 01 Nos. Along With Rubber Bush As Per Sample. Fabrication/ Providing And Fitting Of 04 Nos Pump Body Bushes. Repairs To 02Nos Line Shaft By Way Of Welding, Turning And Making Threads As Per Sample. Providing And Fitting Of 02 No Sleeve For Line Shaft By Making Internal Threads Of Required Size. providing and Fixing Of Rubber Sheet Joints For Flanges 05 Nos Cut To Required Size. The Job Includes Fitting Of The Pump Using New Nuts And Bolts/ Studs. Fabrication/ Providing And Fitting Of Well Mouth As Per Sample And Strainer To The Bell Mouth Of Pump Body.Connecting The Bottom Suction Pipe Piece With The Pump Body Along With Line Shaft With Socket And Required Nuts And Bolts And Rubber Sheet Joints Of Appropriate Size Then Lowering The Pump In The Sump Using Tools And Tackles With The Help Of Manual Labour And Existing Chain Pulley Arrangement. Connecting All The Suction Pieces With Required Nuts, Bolts And Rubber Sheet Joints, Line Shaft With Socket, Fixing Of Spider Guide On Line Shaft Ensuring That The Spider Guide Bush Remain At Center Of Sleeves.Fitting All The Suction Pipes, Line Shaft, And Spider Guide In Similar Manner. Fabrication/Providing And Fitting Of New Suction Column Of 10 Inch Dia Of 2.5Ft Approximately With Flange Welded To Its Ends Along With Line Shafts, Spider Guides, Sleeves And Socket If Required. The Flanges Should Have 2.5 Inch (Min) Collar Width And 16Mm Thickness. The Pipes Ends Should Have Been Faced To Accommodate The Spider Guide Accurately Without Any Play. The Ends Of Pipes Should Have 04 Nos Wedge Welded To Their Ends To Support/ Give Strength To Welded Flanges. Then Fitting The Additional Fabricated Pipe Piece Before Discharge Head On The Top Piece Of Suction Pipe With Required Nuts, Bolts And Rubber Sheet Joints, Fitting The Stuffing Box With Gland Set And Gland Packing, Fitting Of Ratchet Assembly, Then Assembling The Motor By Providing And Fitting Bushes Of Appropriate Sizes And With Existing Coupling Nuts, Bolts. Giving All The Electric Connection And Testing The Running Of Pump On Full Load And Checking Of Any Type Of Leakage At Suction Column Joints.Complete Job Includes Cost Of Material, Hire Charges Of Tools And Tackles Required For Execution Of Job, Carriage, Transportation, Labour Charges And Testing Complete At Lis Katalbatal. Material Of Construction Should Be As Below:- I Line Shaft/ Line Shafts Sleeves :- Stainless Steel (Aisi-410) Ii Column Pipes Complete As Per Site Condition. :- Steel As Per Is: 210 Of 1978/Grade A Of Is:2062 1984 With Latest Amendments And Is: 4270 Iii Nuts And Bolts :- High Tensile Steel Iv Line Shaft Coupling :- Steel As Peris1030 Of 1982 With Latest Amendment V Other Component :- Conforming To Is 1710 With Latest Amendments For Such Duty, Head Variations And Quality Of Raw Water Vi Thickness Of Pipe :- 08Mm Dismantling The 120 Hp Oil Immersed Star Delta Starter From Installed Position Of Pumping Unit No. Iv After Disconnecting All Electrical Connections From Input And Output Side. Loading In Transport For Carriage To Workshop For Repair. Repair To Starter By Way Of Extracting Out The Damaged Copper Contact Points Both Moving And Fixed, Thimbles, No Volt Coil, Tripping System, Overload Relay And Replacing The Same With New Ones, Repairs To Operating Mechanism. Providing/Filling Of 20 Liters Transformer Oil For Topping Of Starter After De-Moisturizing The Existing Oil. Back Carriage Of The Starters To Lis. Installation Of Starter By Proving And Fitting New Nuts And Bolts Required Commissioning And Test. Giving All The Electric Connection By providing and Fixing New Thimbles Of Appropriating Rating/Size. Note: The Bidders Are Advised To Visit The Site And Quote The Rates Including The Rebate On Old Material. Any Modification/Alternation If Needed At The Time Of Execution Of Job Shall Be Carried Out At Site Accordingly , Rebate On Old Parts
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Jammu And Kashmir View Result →
28.
Defence #11328000 AOC
Bids Are Invited For Superstructure Of Fiber Glass Hut Frp Shelter 8 To 10 Men Of Size 6 Point 00 M X 4 Point 80 M X 2 Point 70 M Height As Per Ce Comma Hq 4 Corps Drawing No Ce 4 Corps , Cement 43 Grade Opc Packed In Hdpe Bag Each 50 Kg Wt Conform To Is 8112 1989 , Coarse Sand Free From Vegetation , Coarse Aggregate 20Mm Graded , Coarse Aggregate 40Mm Graded , Coarse Aggregate 40 To 63Mm Graded , Stone For Rr Messonry Less Than 6 Inch , Mild Steel Bars Of Size 6 To 8Mm Dia Conforming To Is 432 Part I 1982 , Mild Steel Bars Of Size 10Mm And Above Dia Conforming To Is 432 Part I 1982 , Water Proofing Compound Conform To Is 2645 2003 , Ms Binding Wire , Quick Setting Compound , Bricks Sub Class B , Brick Bats , Pvc Pipe 110 Mm Dia 3 M Long , Pvc Bend 110 Mm Dia , Pvc Socket 110 Mm Dia , Water Storage Tank Triple Layer 500 Ltrs Confirming To Is 12701 1996 , Fabrication From Structural Steel Section For Staging Of Water Storage Tank Made Of Capacity 500 Oblique 1000 Ltrs , Chromium Plated Piller Cock Swan Neck With Aerator And Butter Fly Handle Weight Not Less Than 450 Gm , Stop Cock L Type Chromium Plated Brass 15 Mm Weight Not Less Than 330 Gm , Bib Cock Long Spout Brass Chromium Plated 15 Mm Weight Not Less Than 330 Gm , Pvc Connection 45 Cm Long 15 Mm , Soap Dish Ss Comma Flat Back Complete With Screw , 2000 Ltrs Anaerobic Frp Oblique Ldpe Septic Tank , Pvc Air Pipe 25 Mm Dia , Ppr Elbow 90 Degree 20 Mm Dia , Ppr Female Thread Socket 20 Mm Dia , Ppr Male Thread Socket 20 Mm Dia , Ppr Female Thread 90 Degree Elbow 20 Mm , Ppr Female Thread Tee 20 Mm , Ppr Plain T 20 Mm Dia , Ppr Elbow 90 Degree 32 Mm , Ppr Plain T 32 Mm , Pvc Wall Clamp 32 Mm , Pvc Wall Clamp 20 Mm Dia , Gate Valve 32 Mm , Gate Valve 20 Mm Dia , Ppr Pipe 32 Mm Dia , Ppr Pipe 20 Mm Dia , Ppr Socket 32 Mm , Ppr Socket 20 Mm Dia , Tank Connector 32 Mm , M Seal 150 Gm Pkt , Taflon Tape Roll Isi Marked , Solvent Cement 150 Gm Tube , Pvc Waste Pipe 32 Mm And 1M Long , Pvc Waste Pipe Cp Coupling 32 Mm Dia , Pvc Pipe 110 Mm Dia Each 3 Mtr Length , Pvc Bend110 Mm Dia , P Trap Vitreous China , Cp Grating 100 Mm Dia , S Trap Vitreous China , Distribution Box 6 Way Double Door Spn Comma 240 Volts Copper Bus Bar And Neutral Link Earthing Stud Conforming To Is 13032 And Is 8623 Double Door Type Comprises With The Mcb , Mcb Spn 240 Volts 32 Amps , Mcb Sp 6 To 32 Amps , Pvc Tape 19Mm Wide 5 M Long , Cable Pvc Insulated Electric Cables Heavy Duty 1100 Volts Grade Multi Stranded Copper Conductor Of Size 1 Point 5 Sqmm Single Core Frls Confirming To Is 1554 Part 1 1988 , Cable Pvc Insulated Elecric Cables Heavy Duty 1100 Volts Grade Multi Stranded Copper Conductor Of Size 2 Point 5 Sqmm Single Core Frls Confirming To Is 1554 Part1 1988 , Pvc Casing Capping 1 Inch X 6 Feet Long Medium Grade Snow White , Pvc Casing Capping 3 Oblique 4 Inch X 6 Feet Long Medium Grade Snow White , Switch Piano 5 Amp 230 Volts Flush Type One Way Snow White , Led Tube Light Fittings 20W Rechargable Type 230V Box Type 2 Feets With Crca Body Pre Coated White And Prewired For Led Tube Complete , Screw Full Thread 6 X 19 Mm Isi Marked Comma 200 Nos Pkt , Pvc Switch Board Snow White Size 7Inch X 4 Inch For Sockets And Switches , Pvc Switch Board Snow White Size 8 Inch X 10 Inch For Main Switches Db , Switch Socket Combination Snow White Multipurpose 2 In 1 Comma 15 Amp 230 Volts , Switch Socket Combination Snow White 5 Amp 230 Volts , Service Bracket 40Mm Dia Gi Tubing Medium Grade 1 Point 5 Mtr Long , Service Cable Pvc Insulated Aluminium Conductor Comma 1100 Volt Grade Heavy Duty Served With Inner Sheathing Of Pvc Tap And Overall Pvc Sheathed In Service Connection 10 Sqmm 2 Core , Ceiling Rose Three Terminal Snow White , Led Bulk Head Fitting High Pressure Die Cast Aluminum Front Cover With Glass Cover With Specially Design Gasket With Led Lamp 10 Watts Rechargable Type , Pvc Flexible Wire Copper Conductor Multi Stranded 0 Point 0016 Oblique 76 , Pvc Flexible Conduit Pipe 15 Mm Dia , Pvc Round Oblique Square Block , Pvc L Bend And T Junction Joint For Pvc Casing And Capping , Earthing Plate 600 X 600 X 6 Mm Galvanised Steel Suitable For Gi Strip Fittings Comma Drilled With 2 Nos Holes For 6 Mm Dia Near One Side , Ci Earth Pit Cover Of Size 300 X 300 X 6 Mm With Angle Iron Of Size 20X20Mm Comma 3 Mm Thick With Ms Frame , Funnel Fitted With 20 Mm Diameter Gi Pipe 1 Point 5 M Long Pipe , Gi Wire 4 Mm Diameter For Earthing , Charcoal , Salt Normal , Air Termination Single Pointed Aluminium Rod 12 Mm Dia And 300 Mm Long , Testing Point Terminal Block Make Of Gun Metal And Phosphorus Bronze Size 75 X 75 X 25 Mm Drilled And Screwed Including 3 Nos 8 Mm Dia 25 Mm Long Hexagonal Head Screw , Aluminium Strips 25 X 3 Point 0 Mm , Galvanized Iron Strip 32 X 6 Mm , Funnel Fitted With 20 Mm Diameter Gi Pipe 1 Point 5 M Long , Earthing Plate 600 X 600 X 6 Mm Galvanised Steel Suitable For Gi Strip Fittings Comma Drilled With 2 Nos Holes For 6 Mm Dia Near One Side , Insulating Pvc Block 75X75X30 Mm With Insulating Clamp Nut And Bolt , Double Sleeping Bunk Alongwith Ply Wood And Mattress , Portable Indoor Type High Quality Kero Heater Metal Body Ignites Type Of Continues Heating Duration Min 8 Hrs And Above With Capacity 4 Ltrs Above Min Output 7000 Btu Per Hrs Incl All Accessories , Kassi With Handle , Black Steel Sr Shovel Spade Belcha , Plaster Trowel With Wooden Handle , Showel Square Nose 14 Gauge Blade Size 310 X 245 Mm , Plumb Bob Iron , Crow Bar 1 Point 5 Inch Dia 4 Feet Long , Hammer 1 Kg With Wooden Handle Durmut , Hammer 0 Point 5 Kg With Wooden Handle Durmut , Brick Line 30 Mtr Nylon Dhaga , Traveler Brick Mason 4 Inch 305Mm , Sprit Level , Measuring Tape 30 Mtr Steel , Water Bucket Steel 13 Inch Dia , Picks Axes With Chisel And Point Ends Kudali 14 Cp Nominal Weight 3 Point 0 Kg , Lime Brush Best Quality , Painting Brush 100Mm , Hacksaw Frame Large With Blade 05 Nos , Galvanised Iron Pan Mortar Tasla Comma 18 Gauge 20 Inch Dia , Wooden Waterproof Plywood Thickness 12Mm , Nails Various Sizes , Rammer Earth With Handle Minimum Weight 5 Kg Without Handle , Tester For Electrician With Plastic Handle 150Mm , Electric Drill Machine Heavy Duty 500 Watt Electrical Backup With Battery And Charger , Drill Bits Hss 5Mm Comma 8Mm And 10Mm Dia For Electric Drill Machine , Electric Tile Cutting Machine With Interchangable Blades 05 Nos , Electrical Sheet Cutter Machine With Blade , Puf Rivet Machine , Centre Punch 8Mm Dia Best Quality Total Quantity : 3056
Contract Date: Ref. Documents Contract Value : 11.40 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Contract Date: Ref. Documents Contract Value : 1.05 Crore
Government Departments No of Bidders 1
30.
Petroleum and Natural Gas #11322090 AOC
Bids Are invited for Custom Bid For Services - Construction Of Compressor Shed With Associated Civil And Electrical Works For Operation Of Two Nos Screw Type Air Compressor At Ihb Mithirohar Pumping Station In Gujarat - Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas Including Dressing Of Sides And Ramming Of Bottoms Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil, All Works Up To Any Lead And Lift, As Directed By The Engineer-In Charge : In All Kinds Of Soil. , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of The Engineer-In-Charge. [Notes: (1) Dismantling Shall Be Allowed During Day Shift Only & Prior Permission For The Same Shall Be Obtained. (2) Providing Of Necessary Covers/ Barricades Around The Work Area Shall Be Done Prior To Dismantling Operations.]Nominal Concrete 1:4:8 Or Leaner Mix. , Supplying & Fixing Welded Wire Mesh Door Made From Steel Wire Fabric Of Rectangular Mesh 75 X 25 Mm Size, Weight Not Less Than 7.75 Kg/Sqm Fixed On Angle Iron Frame By Welding, Fixing Of Holdfast, Hinges, Door Handles, Tower Bolts, Aldrops (2 Nos.), Wheels, Painting With Two Coats Of Synthetic Enamel Paint Of Over A Coat Of Red Oxide Zinc Chrome Primer, Excluding Frame Etc. Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications And Directions Of The Engineer-In-Charge. (Note: Angle Iron Frame Shall Be Paid Separately). , Providing And Laying In Position Cement Concrete Of Specified Grade Including The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cementconcrete For Reinforced Cement Concrete Work;Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources,Portland Pozzolana /Ordinary Portland/Portland Slag Cement,Admixtures In Recommended Proportions As Per Is:9103 To Accelerate /Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength;Including Pumping Of Concrete To Site Of Laying, The Cost Of Centering, Shuttering,Finishing, Curing,Carriage For All Leads,As Per Direction Of The Engineer-In-Charge,For The Following Grades Of Concrete.:Note: 1. Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. Incase The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bearthe Cost Of Extracement. 2.Payment For Reinforcement Shall Be Made As Per Relevant Item Of Sor. ;All Works Upto Plinth Level ; Concrete Of M30 Grade With Minimum Cement Content Of 350 Kg /Cum , Supplying, Cutting,Bending, Hoisting,Placing In Position Withproper Pre-Castconcrete Block Coverand Binding By Pvc Coated (Extrusion Process) 18 Guage Swgwire, High Yield Strengthdeformed Bars Of Grade Fe500 Conforming To Is:1786 With Protectivefusion Epoxy Coating Asper Is:13620 For All R.C.C Works Including All Necessary Handling At All Heights And Depths Complete In All Respects As Per Specifications And Directions Of The Engineer-In-Charge. , Brick Work With Common Burnt Clay F.P.S. (Non Modular)Bricks Of Class Designation 7.5 Infoundation And Plinth In : Cement Mortar 1:6 (1Cement : 6 Coarse Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brickwall Of Mix : 1:6 (1 Cement : 6 Fine Sand) , 6 Mm Cement Plaster Of Mix 1:3 (1 Cement : 3 Fine Sand) , Supplying, Fabricating, Erecting, Placing And Fixing In Position M.S. Structural Works Using Rolled/ Built Up Sections For Truss, Claddings, Bracings, Purlins, Supporting Frames Made Of Joists, Tubes, Pipes, Channels, Angles, Plates, Flats, Bars Etc. Including Cutting To Required Size Welding Of Joints, Fixing Anchor Plates, Including Bolts, Theading, Nuts, Washers, Sleeves Etc. Including Preparation Of Detailed Fabrication Drawings & Submission To The Engineer-In-Charge For Approval Before Start Of Fabrication, Supplying & Applying Painting With Two Coats Of Epoxy Paint Epilux 155 High Build Enamel Over A Coat Of Epilux 610 Primer Of M/S Berger Or Any Other Approved Equivalent Make As Per Manufacturers Recommendation, Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications And Directions Of The Engineer-In-Charge. (Excluding The Cost Of Concrete Work). , Providing And Laying 52 Mm Thick Cement Concrete Flooring With Metallic Hardner, Under Layer Of 37 Mm Thick Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) And Top Layer Of 15 Mm Thick Metallic Concrete Hardner Consis Ting Of Mix 1:2 (1 Cement : 2 Stone Aggregate 6 Mm Nominal Size) By Volume With Which Metallic Hardening Compound Such As Ironite No . 1 Of Ironite Co. Of India Ltd. Or Aproved Equivalent Mixed In The Ratio 4:1 (4 Parts Of Cement : 1 Part Of Metallic Floor Hardenin G Compound Of Approval Quality) By Weight, Inclusive Of Cost Of Finishing, Labour, Material, Equipment, Etc. As Per Specifications A Nd Directions Of The Engineer-In-Charge. , Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) : 6 Graded Stone Aggregate 40 Mm Nominal Size) , Supplying And Layingflat Brick Soling Infoundation Trench, Infloors, Garages, Sumps,Etc., With Bricks Of Classdesignation 50 Laid Toproper Slope, Level Andgrade Etc. Filling Of Thejoints With Sand Etc.Complete In All Respectsinclusive Of Cost Of Alllabour, Materials, Tools,Tackles Etc. As Perdrawings, Specificationsand Directions Of Theengineer-
Contract Date: Ref. Documents Contract Value : 24.99 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
31.
Heavy Industries and Public Enterprises #11321092 Technical Bid
Tender For Civil And Mep Works For Setting Up Hindlabs Minor Lab, Barpeta, Assam- 1 Civil Works 2 Solid Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 30X20X15Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In : Cm 1:6 ( 1 Cement : 6 Coarse Sand) Etc Complete 3 12 Mm Cement Plaster Of Mix:1:6 (1 Cement : 6 Fine Sand). 4 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade:New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) 5 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 6 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 7 Providing And Laying Premiumvitrified Tiles In Floor In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier,Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Glazed Vitrified Tiles Matt/Antiskid Finish Of Size Size Of Tile 600 X 1200 Mm 8 Providing And Laying Premium Vitrified Wall Tile In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600 X 1200 Mm 9 Providing And Fixing Fiber Glass Reinforced Plastic (Frp) Door Frames Of Cross- Section 90 Mm X 45 Mm Having Single Rebate Of 32 Mm X 15 Mm To Receive Shutter Of 30 Mm Thickness. The Laminated Shall Be Moulded With Fire Resistant Grade Unsaturated Polyester Resin And Chopped Mat. Door Frame Laminate Shall Be 2 Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fiber Glass From All Sides. M.S. Stay Shall Be Provided At The Bottom To Steady The Frame. 10 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 11 Providing And Fixing To Existing Door Frames.30 Mm Thick Fiberglass Reinforced Plastic (F.R.P) Flush Door Shutter In Different Plain And Wood Finish Made With Fire Retardant Grade Unsaturated Polyester Resin, Moulded To 3 Mm Thick Frp Laminate All Around, With Suitable Wooden Blocks Inside At Required Places For Fixing Of Fittings And Polyurethane Foam (Puf) / Polystyrene Foam To Be Used All Filler Material Throughout The Hollow Panel, Casted Monoolithically With Testing Parameters Of F.R.P. Laminate Conforming To Table - 3 Of Is : 14856, Complete As Per Direction Of Engineer- In-Charge. 12 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 13 Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 14 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 15 Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is 13983 With C.I. Brackets And Stainless Steel Plug 40 Mm,With Swan Neck Faucet With Pipe In Let And Drain Provision, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required:Kitchen Sink With Drain Board510X1040 Mm Bowl Depth 250 Mm 16 Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms 17 Providing And Fixing Cp Towel Rod Complete Fixed With Cp Brass Screws Of Approved Quality Of Minimum 600Mm Length Approved As Per The Requirement Of Engineer In Charge. 18 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions: 45 Cm Length15 Mm Nominal Bore 19 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Flexible Pipe 40 Mm Dia 20 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is: 893115 Mm Nominal Bore 21 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 10Kgf/Cm2 22 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work,Including Cutting Chased And Making Good The Wall Etc. 20 Mm Pipe 12 Kgf/Cm2 23 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 6 Kgf/Cm2 - External Work - Exposed On Wall 24 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 25 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia 45 Degree Elbow 26 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75X75X75 Mm Dia Door Tee 27 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75 Mm Dia Bend 28 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 50 Mm Pipe 10 Kgf/Cm2 29 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes,Including Jointing With Pvc Solvent Cement - 75 Mm Dia Vent Cowl 30 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia End Cap 31 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -110 Mm Dia End Cap 32 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110X110X110 Mm Dia Door Tee 33 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement- 110 Mm Dia Bend 34 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/Clips At 1.00 M Spacing. This Included Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 75 Mm Dia 6Kgf/Cm2 - External Work- Exposed On Wall 35 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Partition Of Approved Brand And Manufacture, Including Top & Bottom Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Fittings, All Complete As Per Direction Of Engineer-In-Charge. 36 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Door Shutter Of Approved Brand And Manufacture, Including Providing And Fixing Top & Bottom Pivot & Double Acting Hydraulic Floor Spring Type Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Door Fittings, All Complete As Per Direction Of Engineer-In-Charge ( Door Handle, Lock And Stopper Etc To Be Paid Separately) 37 Providing And Fixing Ss H Handle Having Min 45 Cm Length In Toughed Glass Door Including All Necessary Screws Etc. Complete. 38 Providing And Fixing 3M Fasara Frosted Etching Film Of Thickness 25 Microns Self- Adhesive Of Approved Colour, Shade, And Quality With Cutting As Per Approved Design And Pattern, Including Cleaning Of Glass And Making Surface Smooth For Fixing Of Film To The Surface, All Completed As Per The Direction Of The Engineer In Charge. 39 Providing And Fixing Of Glass Door Ss Patch Lock With Out Handle In Toughened Glass Door Including All Necessary Screws Etc. Complete 40 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately):For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 41 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately)Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is : 1868, Minimum Anodic Coating Of Grade Ac 15) 42 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides 43 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 44 Filling The Gap In Between Aluminium/ Stone/ Wood Frame And Adjacent Rcc/ Brick/ Stone/ Wood/ Ceramic/ Gypsum Work By Providing Weather/Structural Non Sag Elastomeric Pu Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete,Complying To Astm C920, Din 18540-F & Iso 11600Upto 5 Mm Depth And 5 Mm Width 45 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 46 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Single Rubber Stopper 47 Providing And Fixing Bright Finished 100 Mm Mortice Lock With 6 Levers Without Pair Of Handles Of Approved Quality For Aluminium Door, With Necessary Screws Etc Complete As Per Direction Of Engineer- In- Charge. 48 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete. 49 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:300X10 Mm 50 Vinyl Transparent Vision Glass Stickers: Supply And Pasting Of Vinyl Transparent Vision Glass Stickers In Approved Size And Design In Glass Partition And Door As Per The Instruction Of Engineer In Charge. 51 Backlit Acrilic Board With Projected Letters: Supply, Installation, Testing And Over Suitable Welded And Painted 25X25X3Mm Ms Angle Frame In Suitable Location And In Proper Line And Level With All Necessary Fastners, Supports Etc. Electrical Works Likes Electrical Wirings, Connections, Fittings, Externaly Fixed Weather Proof 2/3 Pin Plug Points And Sockets Including Boxes Etc. To Be Complete Properly. All Fabrication And Fixing Should Be Done As Per Approved Design And Instructions Of Engineer In Charge. (Note: Only Front Elevation Will Be Measured.) 52 Furniture 53 Supply And Erection Of Airport Type 3 Seater Waiting Chair With Powder Coated Chromium Finish Having Minimum Dimensions 1675Mm Length X 710Mm Width X 775Mm Total Height And 400Mm Seat Height . Seat: High Quality Cold Rolled 1.2Mm Thick Steel Perforated Sheet Pressed And Welded To Form The Shape. Arm & Leg: High Quality 1.2Mm Thick Ms Tube / Sheet . Cross Bar: High Quality Cold Rolled 2Mm Thick Steel Sheet Pressed And Welded To Form The Shape. 54 Supply Of Phlebotomy Chair With Optimum Design Made Up Of Ms Power Coated Frame And Up Upholstery Type Seat,Back Rest And Arm Rests.Both Side Arm Rest Should Be With Height And Position Adjustable System And All As Per The Instruction Of Engineer In Charge. 55 L-Type Workstation Of Overall Size (1350 * 600)Mm + (1000 * 450)Mm X 750 Mm (L X D X H) And Pedestal Unit Made Up Of 18 Mm Thick Exterior Grade-I Mdf Board On All Sides Conforming To Is:14587 From Approved Makes Such As Century/Greenply/Fineply Or Equivalent With Decorative Laminate On Both Side And All Edges To Be Fixed With 2Mm Thick Pvc Edge Beading. One Three-Drawer Modular Pedestal Unit Of Minimum Size 450 Mm (W) X 500 Mm (D) X 650 Mm (H) All With Retractable Key Board Tray, Drawer Channels, Hinges, Handles, Individual Locking System, And All Necessary Fittings And The Workstation Should Have An Electrical Flip Box With 2 Nos Universal Power Socket & 1 No Data Socket Etc And Cable Management Tray. All Work As Per The Approved Design And Instruction Of The Engineer-In-Charge/Architect. 56 Providing And Erection Of Reception Counter Table Of Length 1200 Mm And First Level Should Be Provided At A Height Of 750 Mm And Width 600 Mm And The Second Level At A Height Of 1050Mm From Base With A Width Of 300. The Table Made Of 18Mm Thick Pre Laminated Medium Density Board Of Exterior Grade (Grade I) Is: 14587:1998 With Decorative Laminated Finish On Both Sides And 2 Mm Thick Pvc Beading On All Edges, Including Electrical Flip Box, Cable Measurement Tray, Grommets With 3 Nos Universal Power Socket And Ethernet Port, Three Drawer Pedestal Unit With Drawer Channel, Handles, Hinges, Lock All Complete As Per Approved Drawing And Installation Of Engineer In Charge/Architect. 57 Supply And Installation Of Visitors Chair Medium Back, Mesh Back Cushion Seat With Fixed Supports Made Of 304 Stainless Steel/ Powder Coated Ms Of Approved Colour Or Shade As Per The Instruction Of The Engineer In Charge 58 Revolving Chair: Medium Back Ergonomic Chair With Five Nos. Star Shaped Nylon Base. Castor: 50Mm Diameter Nylon Twin Wheel, Gas Lift Height Adjustment, Back Angle Adjustment , Fixed Armrest Providing Natural Resting For Arms. Seat With Pu Coated Foam Backed Fabric, Back Rest With Mesh Type Fabric, Upholstery: Heavy Duty Rubber Backed Fabric In Black 59 Counter Height Stools :Supply And Erection Of Counter Height Stools ( Bar Stools ) Of Following Specifications : Revolving Adjustable Chrome Plated Steel Body Chairs With Resistance To The Corrosion. Cushion Seat With Lift Mechanism For Adjustment Of Height. Minimum Height 750Mm Before Expansion. Medium Back Rest And Arm Rest. Item Shall Be Of Reputed Make. 60 Supplying And Fixing Of Lab Work Table With 18 Mm Thick Edge Moulded Granite Top Supported Over 18Mm Thick Marine Ply Wood Of 2500Mm,L X 1200Mm,W X 850Mm, H And Powder Coated Gi Frame Of Section Size Not Less Than 50X50X1.5 Mm Including And Providing 4 Nos Under Storage Movable Cabinents Of Size 600Mm,L X 450Mm,D X 750 Mm,H And Powder Coated Steel Sheet Of Thickness Not Less Than 1Mm With 1 Drawer And Partition Bottom Storage Space With Door Including Drawer Channels, Individual Locks And Handles All As Per The Approved Drawing And Instructions Of Engineer In Charge 61 Lab Work Bench -The Work Bench Top Made Up Of 18Mm Thick Granite Top Edge Moulded Over 18 Mm Thick Marine Plywood And Gi Powder Coated Frame Work Of Section Size Not Less Than 50X50X1.5Mm. The Width Of The Table Shall Be 750Mm And Height Shall Be 850Mm. The Frame Provided With Level Adjusting Screws Fixing Accessories ,Carriage Of Material All Complete As Per The Approved Drawings And Direction Of Engineer In Charge.Note Only Length Of The Table Shall Be Measured For Making Payment. 62 Cabinet/Wardrobe: Providing And Errection Of Cabinet/Wardrobe Unit Made With 18 Mm Thick Prelaminated Mdf Board Of One Side Decorative Lamination And Other Side Balancing Lamination Having Total Unit Dimension Of 900Mm,L X 450Mm,Dx 2400Mm,H And All Edges To Be Sealed With Pvc Edge Beeding Of 2.00 Mm Thick Including All Fittings Such As Autoclose Hinges,Chromium Plated Brass Individual Locks & Handles ,Tower Bolts Etc All Required. All Shelves To Be Fix With Proper Support And Bracket Holders At A Spacing Of 400 Mm Centre To Centre And All As Per The Drawings And Instruction Of Engineer In Charge. Board Make : Greenlam/ Merino / Century/ Equivalent . Only Front Elevation Will Be Measured. 63 Overhead Storage: - Providing And Fixing Overhead Storage Unit With Minimum 18 Mm Thick Pre-Laminated Medium Density Fiber Board Exterior Grade (Grade-I) Is: 14587:1998 Marked With One Side Decorative And Other Side Balancing Lamination. Cupboard Shutters Edge To Be Sealed With Pvc Edge Bending Tape 2.00 Mm Thick Of Approved Brand Including Isi Marked Nickel Plated Bright Finishing M.S. Piano Hinges Conforming To Is:3818 Marked With Fixing Chromium Plated Brass 50 Mm Cupboard Or Wardrobe Knobs, Special Quality Chromium Plated Brass Cupboard Locks With Six Levers Of Approved Quality Including Necessary Screws Etc. Complete. Only Front Elevation Will Be Measured. 64 Electrical- Wiring 65 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required.Group C 66 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 67 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 68 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire 69 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2 X 6 Sq.Mm + 1 X 6 Sq.Mm Earth Wire 70 Fixtures 71 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front Onsurface Or In Recess, Including Providing And Fixing 3 Pin 5/6 Amps Modular Socketoutlet And 5/6 Amps Modular Switch, Connection Etc. As Required. (For Light Plugs To Beused In Non Residential Buildings) 72 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front Onsurface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 Ampsmodular Socket Outlet And 15/16 Amps Modular Switch, Connection Etc. As Required 73 Supplying & Fixing Suitable Size Gl Box Wih Modular Plate And Cover In Front Onsurface Or In Recess Including Providing And Fixing 25 A Modular Socket Outlet And 25A Modular Sp Mcb, C Curve Including Connections, Painting Etc. Asrequired. 74 Supply, Installation Of Surface Mounted Led Tubelight. The Luminaire Should Have Cri 80 And Cct Of Both 6500K/5700K. The Luminaire Shall Be Compliant With Ip20 And Ik02 Classification. Luminaire Shall Be Designed To Emit At Least 3600Nominal Lumens And Efficacy Of Atleast 105 Lumen/Watt And Minimum System Wattageof 30 Watts. The Luminaire Shall Be Designed So As To Ensure Lumen Depreciation Of Upto 30% Over 25K Burning Hours. The Electronic Driver Used Shall Have A Power Factor 0.95 And Thd. Make - Philips, Crompton, Wipro, Havells 75 Supply And Installation Of Surface/Recess Mounted Led Round/Square Luminaire With Crca Housing Suitable With Fully Diffused Diffuser For General Lighting In Offic Eareas. The Luminaire Should Have Cri 80 And Cct Of Both 6500K/5700K, Cool White Light. The Luminaire Shall Be Compliant With Ip20 And Ik02 Classification.Luminaire Shall Be Designed To Emit At Least 1000 Nominal Lumens And Efficacy Ofatleast 105 Lumen/Watt And Minimum System Wattage Of 10 -15 Watts. The Luminaire Shall Be Designed So As To Ensure Lumen Depreciation Of Up To 30% Over 50K Burning Hours. The Electronic Driver Used Shall Have A Power Factor 0.95 And Thd. For Light Fittings To Be Installed In False Ceiling, All Required Cuttings Shall Be Made And Damages Shall Be Made Good As Per The Direction Of Engineer In Charge. Make-Philips, Crompton, Wipro 76 Supply, Conveyance, Installation, Testing And Commissioning Of Ceiling Fans Of The Following Sizes Using Standard Accessories Excluding Resistance Type Regulator, Wiring The Down Rod With Pvc Insulated And Pvc Sheathed 650/1100V Grade 3 Core Round Copper Conductor Flex Wire Or With Extended Original Wiring Etc. As Required. 1200Mm Sweep - 5 Star Rated, 3 Blade Ceiling Fan Complete With 300Mm Down Rod, Canopies,Shackles. 77 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existingmodular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 78 Supplying, Conveyance And Installation Of 3 Blade, 400 Mm Sweep, 1400 Rpm Wall Mount Fan Including Frames And All Mounting Accessories Complete. Recommended Make: Usha/ Havells/ Bajaj / Almonard Or Equivalent 79 Supplying, Conveyance And Installation Of 150 Mm Sweep,1800 Rpm Exhaust Fanincluding Frames And Allmounting Accessories Complete. Recommended Make: Usha/Havells/Bajaj Or Equivalent 80 Supplying And Fixing 3 Pin, 5 Amp Ceiling Rose On The Existing Junction Box/ Wooden Block Including Connection Etc As Required. 81 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required. 82 Supply, Installation Of 12 Watt Led Bulb. 83 Db And Switchgear 84 Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall , Making Good The Damages, Colour Washing Etc. As Required6 Way (8+18) - Double Cover Tpn Vertical Db With Provision For Fixing 4P Mcb / Isolator/ Rccb/ Rcbo As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) 85 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 16 Way, Double Door 86 Supplying And Fixing 5A To 32 A Rating, 240/415 Volts, 10 Ka, \\C\\ Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole 87 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 88 Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 89 Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existingmcb Db Complete With Connections, Testing And Commissioning Etc. As Required.63Amps 90 Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30Milli Amperes In The Existing Mcb Db Complete With Connections, Testing Andcommissioning Etc. As Required.63 Amps 91 Supplying And Fixing Cable End Boxes (Ip 43) Suitable For Following Single Poleand Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess,Complete With Testing And Commissioning Etc. As Required.For 6 Way, Double Door Spn Mcbdb 92 Cctv And Networking 93 Supply, Conveyance And Installing Of 2Mp Ip Dome/Bullet Camera Having 1/3Progressive Scan True Day And Night Colour Ir Camera Having Effective Pixel Of 2Mp, Video Frame Rate Of 2Mp @30Fps, Minimum Illumination Of 0.01 [email protected], 0Lux@Ir On, 20 M Ir Range, 24 Ir Led, Awb, Agc, Blc, 2D Noise Reduction,With 3.6Mm Board Lense, 12 Vdc, Poe Ip67 Rated Weatherproof Performance. 1 Year Warranty. Make: Bosch/Cp Plus/Honeywell Or Equivalent 94 Supply, Installation And Integration Of 8 Channel Embedded Linux Poe, Nvr (Network Video Recorder), Having Dual Core Embedded Processor, Must Connect 8 Channel Ip Cameras , Should Support Min 2 Sata Hdd Each Of 6Tb And Must Recordvideo Simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smartevent, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(Hevc)/H.264+/H.264, 2 Year Warranty, Image Quality Should Be Maintainedthroughout The Warranty Period. Make: Bosch/Cp Plus/Honeywell Or Equivalent 95 Supply And Installation Of Network Switch. 8 Port Poe Switch 1000Base-T Copper Ethernet Poe+ Connections, 10M/100M/1G Rj-45 Copper Ports, 1000Base-X Fiber Sfp Ports, 8 Port Auto Sensing 10/100/1000 Mbps Poe, Minimum Cpu Memory 512 Mb With 2 Sfp/Combo Ports, Energy Efficient Ethernet (Ieee 802.3Az). Make: Cisco/Cp Plus/ Netgear Or Equivalent 96 Supply And Fixing Of 6U Wall Mounting Rack With Supply And Fixing Of Mounting Brackets For Support Lockable Front Door And Detachable Side Doors, Cable Manager And Pdu Of 4 Or 6 Sockets Including Cooling Fan With Accessories Complete 97 Supply And Installation Of 8Tb Hard Disk 98 Supply And Installation Of Led Color Monitor Of Minimum 32 Inch Screen, Complete,Uhd Display Make: Lg/Samsung/Panasonic Or Equivalent. 99 Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/Recessed Steel/Pvc Conduit As Required1 Run Of Cable 100 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25 Mm 101 Supplying And Fixing Rj45 Outlet Including Cover Plate, Keystone Jack And Gang Box Supporting, Connection Etc. As Required 102 Air Conditioning System 103 Supply, Installation, Testing And Commissioning Of Split Air Conditioner Of Followingcapacity And Specifications: Consisting Of High Wall-Mounted Type Room Unit (Fan Coil) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Energy-Efficient Suitable Rotary Compressor For Operation On Single Phase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room (Fan Coil) Unit On Wall, Standard 4M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room & Condenser As Per Site Conditions, Comprising Of 1Inch Dia Drain Pvc Pipe With Insulation Up To 4 M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigerant Gas, Suitable Stabilizer Etc Complete As Required. (Make: Voltas, Blue Star, Hitachi, Carrier Or Equivalent). 2 Tr 3 Star Rated (Inverter Type Ac) As Per Bee 104 Supply, Installation, Testing And Commissioning Of Split Air Conditioner Of Following Capacity And Specifications: Consisting Of High Wall-Mounted Type Room Unit (Fan Coil) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Energy-Efficient Suitable Rotary Compressor For Operation On Singlephase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room (Fan Coil) Unit On Wall, Standard 4 M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room & Condenser As Per Site Conditions, Comprising Of 1Inch Dia Drain Pvc Pipe With Insulation Up To 4 M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigerant Gas, Suitable Stabilizer Etc Complete As Required. (Make: Voltas, Blue Star, Hitachi, Carrier Or Equivalent). 1.5 Tr 3 Star Rated (Inverter Type Ac) As Per Bee 105 Supply And Installation Of Additional Copper Piping, Cabling From Indoor To Outdoor And Drain Piping For Air Conditioning Unit With Proper Insulation Including All Required On Wall/Above False Ceiling Complete 106 Supply, Installation, Testing And Commissioning Of True On-Line Double Conversion 6 Kva Ups System With 1:1 Crest Factor Single Phase Phase Input – Singlephase Output. Inversion Shall Be Microprocessor Controlled With Instantaneous Sine Wave Control Using Igbt. Ups Shall Have Standard Display Features, Alarms, Safeties, Etc Input Voltage Range : A) Phase & Single Phase With Ground B)Votage Range 190 Vac & 250 Vac C)Input Frequency : 50/60 Hz D)Power Factor : 0.95 Or Above E)Thd : Less Than 5% With Full Load Bypass F) Voltage Range & 200Vac & 240 Vac G) Frequency Range – 45-55 Hz/55-65 Hz Output Voltage Range H)Voltage Range & 200Vac & 240 Vac I)Frequency Range & 50/60 Hz J)Voltage Distortion & Linear Load = 2% K)Voltage Distortion – Nonlinear Load = 5% L)Output Waveform – Pure Sinewave M) Minimum Back Up Time : Continuous 60 Minutes At Full Load Rectifier Shall Be Full Wave Type (Shall Fully Meet The Specified Input Power Requirements) Battery Type: Sealed Lead Acid Maintenance Free Dc Voltage : 24/48/96V Dc System, Battery Nos And Capacity Shall Be Designed For Optimum Storage Space. Make: Liebert Vertiv/Apc By Schneider/Numeric By Legrand 107 Visi Cooler And Refrigerator 108 Supply And Installation Of 260 Litre Refrigerator, Direct-Cool Model With A Minimum 3-Star Bee Rating And Stabilizer-Free Operation. It Shall Use Eco-Friendly Refrigerant (R600A) And Have A High-Efficiency, Low-Noise Compressor. The Unit Shall Include Toughened Glass Shelves, A Vegetable Crisper, Bottle Storage For 2L Bottles, An Internal Freezer Compartment, And A Removable Anti-Bacterial Gasket. It Shall Operate On 230V, 50Hz Ac And Include Standard Accessories Such As An Ice Tray And Egg Tray. The Refrigerator Shall Have 1-Year Comprehensive Warranty And 10-Year Compressor Warranty, With Bis Certification.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
32.
Housing Urban and Rular Development #11319892 AOC
Quotation for NON CSR Electrical Item for the work supply installation testing and commissioning of Electrification at the Mahalaxmi Temple, Kolhapur,Dist.Kolhapur- 1 Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (4 m poles) 2 Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for DG Set). 3 SITC of ESE type Lightning Arrestor Air Terminal as per standard NFC 17-102, Level IV with protection radius 51 mtr @ mounting height 5 meter.LA should be have CPRI test cerficate and should have test cerficate as per NFC 17-102 of suitable europian authority. 4 SITC of 3 meter height Mounting structure MAST (FRP/G.I.), along with supporting guy rope, base plate, mounting structure, required nut bolts etc. 5 SITC of Strike Recorder with weather proof Enclousure. It should be standalone type with no external power source requirement. 6 SITC of Test Link 7 SITC of Pipe in Pipe type GI maintanance free earthing - 80/38 (3.0 Mtr.s) with all other loose acessories and earthing pit chamber and cover. 8 SITC of single core 35 Sq. MM. Insulated Alm. Armoured Cable along with all installation accessories like clamp etc. (Optional) from LA to Earth Pit. Manufacturer to specify Copper/Aluminium). 9 Supplying, fixing and commissioning of MLTP including: Incoming - 200A MCCB 25 KA-2 nos, 200A ATS 4P - 1 Nos, Bus 250A Aluminium Outgoing : 63A 4P MCB - 5 Nos, 40A 4P MCB- 10 Nos, 125A 4P MCCB - 1 Nos, 160A SP MCCB - 1 Nos with floor mount stand 10 Supplying, fixing and commissioning of LTFP with 200 AMPS MCCB Incomer 8 Nos. Outgoing with 40 AMPS FPMCB 11 Providing & erecting 4 Pole MCCB, 415 V, 125A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 12 Providing & erecting 4 Pole MCCB, 415 V, 160A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 13 Providing & erecting hot dipped galvanised Raceway with cover manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 50 mm height complete with necessary coupler plates & hardware. 14 Providing & erecting hot dipped galvanised Raceway with cover manufactured from 16 SWG (1.6 mm thick) GI sheet of 100 mm width & 50 mm height complete with necessary coupler plates & hardware. 15 Providing & erecting hot dipped galvanised junction box manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm x 200 mm complete with necessary cover plates & hardware. 16 Providing & erecting hot dipped galvanised junction box manufactured from 18 SWG (1.2 mm thick) GI sheet of 300 mm x 300 mm complete with necessary cover plates & hardware. 17 Supply and Installation of 5MP PoE IP Bullet Camera with automatic varifocal lens from 3.3 to 10 mm lens and 30 meter inbuilt IR, Dual Streams with configurable bit rate, GOP and frame rate, Edge based Video Analytics- object classification (Human/Vehicle), object in field, line crossing, enter field, leave field, loitering, follow route, objects stopping or starting to move, counting, occupancy, condition change, similarity search, 16 number of analytics/rules can be configured simulaneously. The video analytics software can detect up to 64 objects per frame in real time. support memory card up to 2TB capacity with health monitoring for early service indication. The recording in local storage should also be AES encrypted, support ONVIF S,G,T,M with MQTT event forwarding, onboard data security by using TPM (Trusted Platform Module) and PKI, supports TLS 1.3, Secure boot, Signed Firmware, software sealing to notify of device configuration changes, Embedded Login Firewall to minimize DDOS Attack, X.509 v3 digital certificates with SHA516 signature hash, audit logs, Unsecure ports like HTTP and RTSP are disabled by default, uses RTSPS/SRTP for video streaming, UL 2900-2-3 Level 2 cybersecurity certified, Camera should have UL, EN, CE, FCC, NDAA, with IP 66 and IK10 impact protection 18 Supply and Installation of 5MP Outdoor Dome camera with 1/2.9‑inch CMOS, Effective pixels 3072 (H) x 1944 (V), 30fps, Sensitivity – (3100K, reflectivity 89%, 1/25, F1.3, 30IRE)Color 0.24 lx Mono 0.03 lx With IR 0.0 lx, 120 dB Dynamic range, Electronic Day/Night, Automatic Electronic Shutter (AES), H.265, H.264 MP (Main Profile); M-JPEG Video compression, White balance, Backlight Compensation, Privacy Mask,Rule based alarms and tracking, Line crossing, Enter /leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), Audio detection (if microphone used), 3 to 10 mm Automatic Varifocal (AVF) lens, MicroSD card slot for edge recording, Motion, tamper and audio detection(if microphone used), FTP, IR range upto 30mtrs Dropbox and e-mail applications, 3 axis adjustment, ONVIF Profile S & G & T, PoE, IP66 and NEMA 4X, IK10, CE, FCC , UL certified. SD card support up to 2TB. 19 Supply and Installation of 5MP Indoor Dome camera with 1/2.9‑inch CMOS, Effective pixels 3072 (H) x 1944 (V), 30fps, Sensitivity – (3100K, reflectivity 89%, 1/25, F1.3, 30IRE) Color 0.24 lx Mono 0.03 lx With IR 0.0 lx, 120 dB Dynamic range, Electronic Day/Night, Automatic Electronic Shutter (AES), H.265, H.264 MP (Main Profile); M-JPEG Video compression, White balance, Backlight Compensation, Privacy Mask,Rule based alarms and tracking, Line crossing, Enter /leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), Audio detection (if microphone used), 3 to 10 mm Automatic Varifocal (AVF) lens, MicroSD card slot for edge recording, Motion, tamper and audio detection(if microphone used), FTP, IR range upto 30mtrs Dropbox and e-mail applications, 3 axis adjustment, ONVIF Profile S & G & T, PoE, CE, FCC , UL certified. SD card support up to 2TB. 20 Supply and Installation of 12MP IR Panoramic camera with 1/2.3‑inch CMOS, 360° lens, Effective Pixels 3008 x 3008 (9 MP), 1 to 25 [30] fps, Sensitivity @30IRE: 0.15lux(color), 0.048lux(mono); 0 lux with IR; 20m IR; 120 dB WDR, Video compression H.264 (MP)/ H.265 (MP); M- JPEG, Electronic Day/Night, White Balance, Automatic Electronic Shutter, Backlight compensation, Intelligent Dynamic Noise Reduction (iDNR), Privacy Masking, Rule based alarms and tracking, Line crossing, Enter /leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), Camera Trainer (machine learning to train user specified objects), Built-in microphone(Integrated array with 3 digital MEMS audio sensors), Signal-to-Noise Ratio, Full-duplex / half duplex Audio Streaming, Memory card slot, 10/100 Base-T, ONVIF Profile S,G, M & T, clientside/cameraedge dewarping,IP66, NEMA 4X, IK10, PoE, CE,UL, FCC. 21 Supply and Installation of all-in-one recording, viewing and management solution for network surveillance systems for up to 256 channels, Pre-installed, pre-configured IP storage solution, with RAID-5/RAID-6 protected, Dedicated storage operating system delivers robust , secure operation, Hot-swappable hard drives, Advanced user and alarm management,Intel® Core™ i7-12700E (25 MB Intel® Smart Cache 2.10 GHz) Processor,16 GB DDR5,ECC UDIMM memory installed, 2U rack mount, 12 Trays: 3.5- inch SATA 3; max 18TB per HDD slot maximum supported, 12Gb/s SAS RAID Card, 4 USB ports; Intel onboard graphics (Intel® UHD Graphics 770),Microsoft Windows Server IoT 2022 for storage standard,UL, CE Certified. 2 x RJ45 Gigabit Ethernet LAN ports (teamed); 1 IPMI BMC port. Operating temperature (°C) 0°-40°C; Operating relative humidity, noncondensing (%) 8 - 90%. Video Managment software In-built (Server-client architecture) with Live viewing of multiple cameras, Local recording and snapshots, PTZ control and digital zoom, Playback and export from storage, Motion and forensic search, Multi-screen grid selection , Sequencing selection, favorite view design.Dual authorization login,e Map support,ONVIF profile S,T complied,User management,Alarm management,SQL based database,LDAP support.Support of camera edge based analytics/server based analytics alarm triggering. Certifications UL,CB,CE,FCC,NDAA,BIS 22 Supplying & erecting 55 professional LED display with 1920 *1080 ( Full HD) Display, suitable for 32/64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In,Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON 23 Supply and Installation of Client Workstation with 21 Inch Monitor 24 RE-2AS Supply of EN 54-16 certified and EN 60849 standards, public address and voice alarm system that ensures a fast, safe and controlled emergency evacuation. It should have 2 class D 500W amplifiers, one shall be for the feild output with two configurations for 100V/70V lines and another one is as standby backup, 6 zones, 3 audio inputs, 6x6 audio matrix,Digital Signal Processing Based Voice Alarm Controller and LCD display 2 rows x 16 characters with 3 inputs. It should have the provition for battery installation with proper rigit & safe mounting option. It shall be suitable for both Wall or Rack mounting provision and have following features:- 1. Support Up to 8 MPS-8Z multizone micropohones or VAP-1 panels connected with CAT5 UTP cable 2. Digital Amplifier (inbuilt) 2X500 watts and 6 zones,Backup amplifier included . 3. 4 pre-amp outputs for external PAamplifiers connection. 4. 10 minutes storage for pre-recorded messag. 5. USB connectivity. 6. Password protection, 7. Overriding Facility for Emergency Condition. 8. Have In-Built or attached MIC. 9. Work on 100 - 240V~ 50/60Hz and standby battery 1x 12VDC. 10.FireAlarm Control Panel integration. 11. Interface MODBUS RTU RS 485 Half duplex Supply of EN 54-16 certified and EN 60849 standards, public address and voice alarm system that ensures a fast, safe and controlled emergency evacuation. It should have 2 class D 500W amplifiers, one shall be for the feild output with two configurations for 100V/70V lines and another one is as standby backup, 6 zones, 3 audio inputs, 6x6 audio matrix,Digital Signal Processing Based Voice Alarm Controller and LCD display 2 rows x 16 characters with 3 inputs. It should have the provition for battery installation with proper rigit & safe mounting option. It shall be suitable for both Wall or Rack mounting provision and have following features:- 1. Support Up to 8 MPS-8Z multizone micropohones or VAP-1 panels connected with CAT5 UTP cable 2. Digital Amplifier (inbuilt) 2X500 watts and 6 zones,Backup amplifier included . 3. 4 pre-amp outputs for external PAamplifiers connection. 4. 10 minutes storage for pre-recorded messag. 5. USB connectivity. 6. Password protection, 7. Overriding Facility for Emergency Condition. 8. Have In-Built or attached MIC. 9. Work on 100 - 240V~ 50/60Hz and standby battery 1x 12VDC. 10.FireAlarm Control Panel integration. 11. Interface MODBUS RTU RS 485 Half duplex 25 RE-2AS BC Supply of the Battery update and activation card EN54-4 certified for RE-2AS. Once activated, the card becomes a key for the charger to work permanently.Package dimensions (W x H x D) : 190 x 20 x 140 mm . Supply of the Battery update and activation card EN54-4 certified for RE-2AS. Once activated, the card becomes a key for the charger to work permanently.Package dimensions (W x Hx D) : 190 x 20 x 140 mm 26 RE-2AS PTT Supply RE-2AS PTT dynamic microphone adds more versatility to your RE-2AS unit. This new device allows you to have a public announcement input right there at your fingertips. This Push To Talk microphone can be directly connected to the priority audio input to bypass the background music. As it is directly powered from the USB port inside the unit, you do not need to add an external power supply. Supply RE-2AS PTT dynamic microphone adds more versatility to your RE-2AS unit. This new device allows you to have a public announcement input right there at your fingertips. This Push To Talk microphone can be directly connected to the priority audio input to bypass the background music. As it is directly powered from the USB port inside the unit, you do not need to add an external power supply. 27 RE-2AS MPE Expansion unit model RE-2AS MPE for the paging microphone RE-2AS MP8Z. It has 8 software programmable buttons for paging up to 8 public address zones. It has an iron chassis to provide stability and protection against damages. All buttons are designed for an intensive use. Expansion unit model RE-2AS MPE for the paging microphone RE-2AS MP8Z. It has 8 software programmable buttons for paging up to 8 public address zones. It has an iron chassis to provide stability and protection against damages. All buttons are designed for an intensive use. 28 RE-2AS WMK Supply of the Wall mounting kit allows to install a PAVA unit on wall. It should be made of 1.5 mm galvanized sheet Supply of the Wall mounting kit allows to install a PAVA unit on wall. It should be made of 1.5 mm galvanized sheet 29 RE-2AS 4L Supply, installation, Testing, & commissioning of Network module to connect multiple PAVA systems., cable length Up to 200m per node and up to 4 units and 24 zones, 4 PAVA systems shall be network with length of max 800m,dimmensions (H x W x D)120 x 100 x 80 mm. Supply, installation, Testing, & commissioning of Network module to connect multiple PAVA systems., cable length Up to 200m per node and up to 4 units and 24 zones, 4 PAVA systems shall be network with length of max 800m,dimmensions (H x W x D)120 x 100 x 80 mm. 30 Supply, fabrication & Installation of thermal insulation on GI ducts complete with Closed Cell foam anti microbial insulation (Nitrile Rubber) with minimum density of 40 Kg/m3 with minimum R Value 4.1/inch & thermal conductivity -0.035 w/mok confirming to Class O & the inner side stuck to the outer facia of the GI ducts with recommended / Proprietory adhesive bonding inline with LEED requirements & installed as per manufacturers recommendation. The insulation joints shall be sealed with 3 wide Black Tape. Thermal Insulation - 9mm thick 31 Supply, fabrication and installation of acoustic lining of supply and return air ducts as specified and shown on the drawing complete with 10 mm thick acoustic insulation with Open Cell Foam Insulation - ArmasoundMicroban antimicrobial product protection withThermal conductivity 0.045 W/m deg.K / density 140~180 kg/m3, with manufacturer recommended adhesive inline with LEED requirement.Acoustic Insulation - 13mm thick 32 Electrical panel with outgoing for 2nos. Of VRV ODU and IDU 33 Supplying, fixing and commissioning of Adjustable Surface Mounted Spotlight IP 65 with RAL finish LED 24W, 3000K CCT, Medium 30 deg beam Having Minimum CBCP value of 6180 candella . Bodymade of Die cast Aluminium.Effective delivered lumens 2000-2200,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 34 Supplying, fixing and commissioning of Adjustable Surface Mounted Spotlight IP 65 with RAL finish LED 36W, 3000K CCT, Medium 30 deg beam Having Minimum CBCP value of 9300 Candella . Bodymade of Die cast Aluminium.Effective delivered lumens 3000-3200, ,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 35 Supplying, fixing and commissioning of Ground recessed Uplight for column, IP 67 RatedBody to be of High Grade Die Cast Aluminium with SS trim. Fixture to have 10w Led with Cool Touch Feature, Narrow 10 deg beam ,Color tempreture to be 3000k ,800-850 lumens, 90 Cri 3 Step Mac Adam with Remore Dali Driver, glare rating UGR<16. Lifespan ≥ 50000 hrs, Ambient temperature 25°-40° C, L&B Ratio L70/B20 with Lumen Maintenance LM80, Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 36 Supplying, fixing and commissioning of Surface Mounted Spotlight IP 65 with RAL finish LED 15W, 3000K CCT,Body Made of Die Cast Aluminium30 deg Medium beam . Effective delivered lumens 1350-1400, MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 37 Supplying, fixing and commissioning of Under Water Step Light IP 68 with RALfinish LED 5-8W, 3000K CCT, Medium beam.Effective delivered lumens 400- 600,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. 38 Supplying, fixing and commissioning of Surface Mounted downlight IP 65 with RAL finish LED 20W, 3000K CCT, Medium 30 deg beam Having Minimum CBCP value of 6180 candella . Effective delivered lumens 2000-2200,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. 39 Supplying, fixing and commissioning of Adjustable Surface Mounted Spotlight IP 65 with RAL finish LED 24W, 3000K CCT, Medium 30 deg beam Having Minimum CBCP value of 6180 candella . Bodymade of Die cast Aluminium.Effective delivered lumens 2000-2200,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 40 Supplying, fixing and commissioning of Customized Deep mala Light IP65 with RAL finish LED 2-3W, 2400-2700K CCT, Diffused Beam° , MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 80 including DALI driver.. Standard Warranty 5 Years. 41 Supplying, fixing and commissioning of Adjustable Surface Mounted Spotlight IP 65 with RAL finish LED 15W, 3000K CCT, Medium 30 deg beam Having Minimum CBCP value of 3000 candella . Bodymade of Die castAluminium. Effective delivered lumens 1200-1400,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 42 Supplying, fixing and commissioning of Ground recessed Uplight for column, IP 67 RatedBody to be of High Grade Die Cast Aluminium with SS trim. Fixture to have 10w Led with Cool Touch Feature, Narrow 10 deg beam ,Color tempreture to be 3000k ,800-850 lumens, 90 Cri 3 Step Mac Adam with Remore Dali Driver, glare rating UGR<16. Lifespan ≥ 50000 hrs, Ambient temperature 25°-40° C, L&B Ratio L70/B20 with Lumen Maintenance LM80, Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 43 Supplying, fixing and commissioning of Surface Mounted Adjustable Spotlight , Auminium Die Cast Body, IP 65 Ratedwith RAL finish LED 15W, 3000K CCT, Medium beam . Effective delivered lumens 1200-1300, MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. 44 Supplying, fixing and commissioning of Adjustable Mini Surface Mounted Spotlight IP65 Body to be made of Die Cast Aluminium with RAL finish LED 3W, 3000K CCT, Narrow 15 degbeam . Effective delivered lumens 40-50 , MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Additional mounting accessories : Honeycomb louvre. Standard Warranty 5 Years. 45 Supplying, fixing and commissioning of Adjustable Mini Surface Mounted Spotlight IP65 Body to be made of Die Cast Aluminium with RAL finish LED 5W, 3000K CCT, Narrow 15 degbeam . Effective delivered lumens 150-200 , MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Additional mounting accessories : Honeycomb louvre. Standard Warranty 5 Years. 46 Supplying, fixing and commissioning of Recessed Linear Grazer Die Cast Aluminium Body with SS Trim,LEDwattage to be 10-14W/m RGBW CCT Grazer 10x24 deg Optic,Remote Dali Dimmable, Delivered lumens: 500-600Real lm/m,glare rating UGR<19L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90.. Standard Warranty 5 Years. 47 Supplying, fixing and commissioning of Surface MountedLinear Grazer IP 67 ratedDie Cast Aluminium Body with adjustable Brackets, LED wattage to be 15W/m 3000K CCT Garzer 10x24 deg Optic,Remote Dali Dimmable, Delivered lumens:Real 1200lm/m,glare rating UGR<19L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90.. Standard Warranty 5 Years. 48 Supply, Installation, Testing and Commissioning ofAdjustable Gobo Projector Light , Body to be Made of Die cast Aluminium, Wattage of 180w Beam, 5200 lumens, 4 Gobo Modules , IK 08 CCT 7000k , Degree 15-45 deg Motorized Zoom, IP 66 rated. CRI >70. Driver Inbuilt DMX RDM Controlled. Life time of Led L70B20 @ 35000 hrs. Gobo design to be decide by Architect/Lighting Designer. 49 Supplying, fixing and commissioning of Post Top LuminaireIP65 & IK10 with RAL finish, LED 40W, 2200K CCT, Symmetrical beam optics. Effective delivered lumens 2000-2200 lumensMacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, Ambient temperature < 40° C, L&B Ratio L80/B20 with Lumen Maintenance LM80, CRI 80+. Standard Warranty 5 Years 50 Supply, Installation, Testing and Commissioning ofPole Mounted Adjustable Gobo Projector Light having Wattage of 40W and Delivered Lumens of 2500. Beam Degree 17-30., IP 65 rated with Pole mounting Bracket. CRI >70. Driver to be non dimmable and Integrated. Life time of Led L70B20 @ 35000 hrs. Gobo design to be decide by Architect/Lighting Designer.Including 4mtr. pole (procurred locally) 51 Supply, fabrication, and installation of a custom-made heritage chandelier of diameter 2000 mm and height 2000 mm, made from heavy-duty metal frame with antique brass / bronze / gold leaf finish as approved by the architect. The chandelier shall include precision-cut K9 / lead crystal elements in pendants, prisms, and beads, arranged in multi-layer form to create a grand decorative effect. Fixture shall be suitable for E14 / E27 LED lamps or integrated LED modules, providing warm white light (2700K–3000K) with CRI ≥ 90 and dimmable control.Suspension shall be with heavy-duty chain/rod system and canopy plate designed to safely carry the total load with 3× safety factor. All wiring shall be flame-retardant copper with proper earthing. The chandelier shall comply with IEC / IS standards and be supplied with shop drawings, finish samples, and load details for approval. Minimum warranty: 5 years. 52 Supply, Installation, Testing and Commissioning of Decorative Wall Light. Housing: IP65 & IK10 with RAL finish, LED 40W, 2200K CCT, Symmetrical beam optics. Effective delivered lumens 2000-2200 lumensMacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, Ambient temperature < 40° C, L&B Ratio L80/B20 with Lumen Maintenance LM80, CRI 80+. Standard Warranty 5 Years 53 Supply, Installation, Testing & Commissioning of International seeTouch QS Wallstation Insert 5 Button with Raise/Lower QSWE-5BRL 54 Supply, Installation, Testing & Commissioning of DALI Dimming controller; Controls 2 independent DALI links with up to 64 DALI ballasts per link. Can take care of Color Tunable fixtures. 4 groups of sensors inputs: Occ sensor, daylight sensor and IR sensor. Requires mains/line voltage feed Similar to Lutron QSN-2UNVDAL- D 55 Supply, Installation, Testing & Commissioning of Switching module with 4channels, each channel with minium 5 amp rating with provisions of sensors inputs: Occ sensor, daylight sensor and IR sensor. Requires mains/line voltage feed Similar to Lutron QSNE-4S 5230D module 56 The QSE-CI-DMX control interface allows zones on a to control DMX512-controlled devices Any zone can be mapped to either a single DMX512 channel or to three separate DMX512 channels, for RGB/CMY color-control The DMX channels (maximum of 32) are mapped to zones, and can be programmed as 1- channel lighting, 1-channel integration, or 3-channel RGB/CMY 57 Supply, Installation, Testing & Commissioning of central processor assembled processor with one/two configurable links and inbuilt BACnet for occupancy status. Each processor link can be configured to be a dimmer link, shade link, or dimmer power panel link. Processor accpets 220-240V, 1 phase, 2 wire, 10A feed, (throiugh power supply) Similar to Lutron Athena 58 Supply, Installation, Testing & Commissioning of Power Supply Unit for supply PDUs to Antenna devices Similar to Lutron QSPS-DH -1 -75Approved Makes :Lutron, Crestron, Pharos,Enlighten 59 Supply, Installation, Testing & Commissioning of Lighting control and monitor software, captures floor wise consumption, each event, Energy Reporting & monitoring per processor, 60 Supply, Installation, Testing & Commissioning of Lighting control BACnet softwares for BMS integration. This license for BACnet software enables a third-party building management system to control, monitor,and manage lights and shades in various areas on a processor. This license can also be used to share information between the control system and other control systems such as area occupancy, power usage, lighting state, etc. License required 1 per processor. 61 Supply of QS cable for power and data simialr to Lutron QS-CBL-LSZH Cable Adheres to CE standards for Low Smoke Generation (EN 60332-1-2), Halogen Gas Emission (EN 61034-2), and Flame Retardation (EN 60754- 1&2). • Five Conductors: Common – 0.75 mm2 (18 AWG) Power – 0.75 mm2 (18 AWG) MUX Data – 0.25 mm2 (22 AWG) _ Data – 0.25 mm2 (22 AWG) Drain Wire – 0.2 mm2 (24 AWG) Laying in suitable conduits to be done by Electrical contractor. 62 The scope of work includes the supply, installation, testing, and commissioning of asuitable Distribution Board (DB) box for mounting dimming and switching modules,complete with all necessary accessories such as enclosures, busbars, terminalblocks, MCBs, internal wiring, and supports, as per approved drawings andspecifications; the DB box shall be of robust construction, properly ventilated, factoryfinished, and designed to facilitate easy integration with the Lighting ManagementSystem, ensuring safe, reliable, and efficient operation after successful testing andcommissioning. 63 Programming of complete systemThe scope of work includes the complete programming, testing, and commissioningof the Lighting Management System (LMS), covering configuration of lighting zones,dimming levels, sensors, and schedules as per the approved control philosophy,integration with BMS/third-party systems if required, point-to-point and functionaltesting of all devices, fine-tuning and calibration, preparation of test reports and asbuilt documentation, and providing necessary training to client/end-user staff toensure the LMS is fully functional, compliant, and ready for handover. 64 Supplying, erecting, testing and commissioning of diesel generating set with alternator of 160 kVA confirming to CPCB IV Plus emmision compliant with output continuous rating. 3 Phase. 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed (liquid cooled multi-in line cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/-5%, with performance class G2. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears,indicators connected with suitable zires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m. with suitable capacity DEF tank provided with first Filling of oil, diesel tank capacity not less than 385 Ltr etc. on provided M20 Grade CC Foundation and obtaning necessary aproval from electrical inspector if necessary. This DG Set is fiited in sound prof and whether proof Acoustic Enclosure asper CPCB IV plus emisison complaint as per specification no. GEN-DG
Contract Date: Jun 19, 2026 Contract Value : 1.28 Crore
Government Departments No of Bidders 3
Maharashtra View Result →
33.
Petroleum and Natural Gas #11318138 AOC
Bids Are invited for Providing and Laying RCC M20 Concrete - As detailed in the tender document , Waterproof Cement Painting Works - As detailed in the tender document , Supply and Installation of ACP Vinyl Sign Boards - As detailed in the tender document , Slogan Artwork and HPCL Logo Painting - As detailed in the tender document , Vinyl Replacement Work on Existing ACP Boards - As detailed in the tender document , Supply and Installation of Backlit Flex Boards - As detailed in the tender document , Granular Sub Base Work - As detailed in the tender document , Wet Mix Macadam Road Work - As detailed in the tender document , Thermoplastic Road Marking Work - As detailed in the tender document , Providing and Laying 80mm Paver Block Flooring - As detailed in the tender document , Supply of 4 inch 150 Gate Valve - As detailed in the tender document , Supply of Double Hydrant Post IS 5290 - As detailed in the tender document , Supply of FRP Hose Box Cabinet - As detailed in the tender document , Supply of 63mm Fire Hoses 15m Length - As detailed in the tender document , Supply of Jet Nozzles with Branch Pipe - As detailed in the tender document , Supply of Landing Valves for Hydrant System - As detailed in the tender document , Supply of 4 Sqmm Copper Earthing Cable - As detailed in the tender document , Stenciling Work Below 2 inch - As detailed in the tender document , Stenciling Work 2 inch to 4 inch - As detailed in the tender document , Supply of 12mm SS Bolts with Nuts and Washers - As detailed in the tender document , Supply of 10mm SS Bolts with Nuts and Washers - As detailed in the tender document , Supply of 25mm Rubber Mats for Cylinder Handling - As detailed in the tender document , Supply and Fixing of Precast Kerb Stones - As detailed in the tender document , Supply of Pressure Gauge Testing Kit - As detailed in the tender document , Supply of Hydrant Hose Testing Kit - As detailed in the tender document , Supply of LPG Hose Testing Kit - As detailed in the tender document , Relay Testing and Thermography of Electrical Panels - As detailed in the tender document , Porta Cabin Flooring Repair Work Cement Sheet and PVC Carpet - As detailed in the tender document , Porta Cabin Interior Repair Work Plywood with Lamination - As detailed in the tender document , Painting Work for Porta Cabin - As detailed in the tender document , Supply and Fixing of Zebra Blinds - As detailed in the tender document , Supply and Installation of 1.5 TR Split Air Conditioners - As detailed in the tender document , Supply and Installation of 2.0 TR Split Air Conditioners - As detailed in the tender document , Fabrication and Installation of Sliding Gate Parking Shed Structure - As detailed in the tender document , Servicing and Maintenance of Industrial Valves - As detailed in the tender document , Supply and Plantation of 4 to 6 Ft Plants - As detailed in the tender document , Grass Lawn Development Work - As detailed in the tender document , Supply of High Back Revolving Chairs - As detailed in the tender document , Supply of Visitor Chairs Cantilever Type - As detailed in the tender document , Supply of Safety Belts - As detailed in the tender document , Supply of Industrial L3 Managed Network Switch - As detailed in the tender document , Supply of 40G SFP Modules - As detailed in the tender document , Supply of 10G SFP Modules - As detailed in the tender document , Supply of 1G SFP to RJ45 Converter - As detailed in the tender document , Supply of Flow Meter - As detailed in the tender document , Micro Grading of Ground Surface - As detailed in the tender document , Supply and Installation of 150 LPH Water Cooler - As detailed in the tender document , Supply and Installation of RO Water Purifier - As detailed in the tender document , Hiring of Hydra Crane 10 to 14 Ton Capacity - As detailed in the tender document , Hiring of Tractor with Operator - As detailed in the tender document , Hiring of JCB Machine with Operator - As detailed in the tender document , Supply and Installation of Mitsubishi PLC Analogue Output Card - As detailed in the tender document Total Quantity : 22065
Contract Date: Ref. Documents Contract Value : 98.23 Lakh
Boards / Undertakings / PSU No of Bidders 4
34.
Health and Family Welfare #11315033 AOC
Tender For Yoga Day 2025-26 venues in Jaipur include Vidhan Sabha, Albert Hall, Jal Mahal, Patrika Gate, Amer Fort, Birla Mandir, City Park Mansarovar, Shree Galta Ji, and Hawa Mahal. Financial Bid BOQ 1 (Part - A) Sl. No. Item Description 1 1- Printing, Marketing & Promotions for Yoga Day 2025-26 venues in Jaipur include Vidhan Sabha, Albert Hall, Jal Mahal, Patrika Gate, Amer Fort, Birla Mandir, City Park Mansarovar, Shree Galta Ji, and Hawa Mahal. 2 1) Flex printing with (pasting on Iron Frame) approximately 37,000 Sq. ft./, in different sizes as per requirement of the event. Complete design, fabrication, printing, setup & deployment of flex hoardings at designated places in Jaipur, stage backdrop, standees, directions, signboards, welcome gates etc. in conjunction with the theme provided by Ayurved Department, Rajasthan across the venue covering the following major areas well before the time of start of event/ activity:Yoga Day 2025-26 venues in Jaipur include Vidhan Sabha, Albert Hall, Jal Mahal, Patrika Gate, Amer Fort, Birla Mandir, City Park Mansarovar, Shree Galta Ji, and Hawa Mahal. 3 2) Printing & Distribution of badges (Total quantity 1950 nos.)–Good quality jackets, printed lanyard to the Yoga Participants, Organizing team, VIP, Media etc. 4 3) Printing & Deployment of 135 nos. Satin cloth Flags–4’ X 3’ on 13’ pole height 5 4) Vertical Flag sets – 130 nos. of size 6’X3’etc. each both side print) inside venue premise along with pathway. 6 5) Placards/ Name plates– 135 nos. 7 6) Invitation Card with Envelope – 1800 nos. (A5 size both sides, Multi Colour) 8 7) Yoga Booklet – 1800 nos. (200 GSM Glaze Paper Minimum 62 Pages Multi Color With Cover Page) 9 2- Jute Bag &T-Shirts (Polo): 10 1) Jute Bag: Quantity 1800Dimension12 x 12 x 3 inchesSampel as per approval by Department 11 2) T-Shirts (Polo)Specification of Polo T-shirt with printed Logo/ message (front) as provided Quantity 8000Size M, L, XL, XXLColour White or finalized by Department, Fabric Cotton Sinker, Quality Approx.220 GSM, Style Collar T-shirt , Printingmulti-colour (front side) 12 3- Venue Design, Development & Management3.1-all Places ofMain Open AreaIndicative Requirements are listed below 13 Total Green Carpet Area(Sq. Ft.) 14 Main Stage with masking & Carpet, stairs with railing on both side- 36x24x4 ft 15 Side Stage with masking & Carpet, stairs with railing on both side- 20x12x4 ft 16 VIP Chairs on stage 17 Podium Base with branding 18 Lighting Lamp with all necessary materials 19 Flower Decoration on main stage, light lamp etc 20 Queue Manager 21 Barricade for access control 22 Pla Card for seating arrangements 23 Support Staff (Male/ Female) 24 3.2 Electrical / Electronic Furniture Misc. 25 Outdoor LED Wall of size approx. (36’ X 12’ with riser, scaffolding for support,maskingon all sides, all necessary cables, connectors and equipment as required 26 Outdoor LED Wall of size approx. (8’ X 6.5’ with riser,masking on all sides, all necessary cables, connectors and equipment as required 27 Sound System : - consists of •64 Pairs of Line array on 10 T Truss Stand equally distribute in entire areas• 18 Pairs of Bass speaker • 30 Stage Monitor • 37 Mike • 23 Mike Cordless • 9 Amplifiers • 38 DI Box • 9 Venue /Sound Craft of equivalent 32 Input and 16 Aux out Digital Mike Mixer with Perfect operator • 9 Sound Boosters • 9 Media Box • 18 Goose Mike • 18 Sound Engineers 28 Live Webcast/Telecast Setup with internet connectivity 29 Large size Dustbins [Green & Blue] 30 Yoga Mat – 6x2 ft 31 Wooden Table – 6x2 ft with white cover 32 Banquet Chair with Cover 33 Canopy – waterproof – 50x30 ft 34 Cloth masking 35 Fire extinguishers 36 Fire marshals 37 Chemical Toilets with proper masking at various places 38 Generator-125 kva with Diesel, Cable, Changeover, Earthing etc. for Sound Systems and LED Screen 39 Drone Camera(HD Quality) 40 Skill Photographer(Perfect Click with HD Quality) 41 Skill Videographer (Perfect Click with HD Quality) 42 3.3- Refreshment ArrangementsIndicative Requirements are listed below: 43 For Participants Chhachh packet 44 For Participants Cookies (good quality) 45 For Participants Water Bottle – 200 ml 46 For Organizers /Officials - Coconut WaterJuice Coffee/TeaLemon TeaSnacks – detail as per department 47 3.4- Travel Arrangement – LocalThe Taxis/ Cabs along with their Drivers will be required from 2 days before and on 21st June, 2025. The Vehicles should be AC, in good running condition, clean seat covers and be provided on 12hrs (120 kms) basis. Additional Hours/ Kms, if any, shall be paid on prorate basis as per the actual quoted cost for the respective vehicle type. All the Drivers must be in well-dressed uniform& with mobile. The tentative number and type of Taxis/ Cabs required as under:Indicative Requirements are listed below: 48 Etios / Dezire 19th – 21st June, 2025
Contract Date: Jun 19, 2026 Contract Value : 84.61 Lakh
Government Departments No of Bidders 4
35.
Power #11314309 Price Bid
Tender for Strenthning Of 33 Kv Line B.Plan 2026-27 Scheme At Various Site Of Edd-Hapur, Under Edc Hapur (3 No. Work) (Dpr N0. 13, 14, 15) , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Plain Cement Concrete Pole 11.0M Long , 33 Kv Xlpe Cable 3X300 Sqmm , 33 Kv Termination Kit 3X300 Sqmm O/D , 33 Kv Polymeric Pin Insulator With Pin , 33Kv V-Type Cross Arm , Earthing Complete , Erection And Fixing Of The Following Materials As Per Relevant Respo/Departmental Norms And Specifications, Including Proper Installation, Alignment, Tightening, And Commissioning At Site. The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration, Along With Responsibility Of The Contractor For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Directions Of Engineer-In-Charge , 33 Kv Xlpe Cable 3X300 Sqmm , 33 Kv Termination Kit 3X300 Sqmm O/D , 33 Kv Polymeric Pin Insulator With Pin , 33Kv V-Type Cross Arm , Earthing Complete , Erection And Fixing Of Pole Structure For Plain Cement Concrete Pole 11 Mtr 33 Kv Ht Line Including Excavation Of Suitable Size Pits, Providing And Fixing Of Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 50×6 Mm With Suitable Nuts & Bolts, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Grouting Of Plain Cement Concrete Pole 11 Mtr Supports In cement concrete 1:4:8 (Cement, Sand & 40 Mm Brick Ballast) In Block Size 450×450 Mm Up To 1/6Th Depth Of Full Length Of Support Below Ground Level And 300 Mm Above Ground Level (Plinth), Using cement concrete 1:4:8 (Cement, Coarse Sand And Stone Grit) Including Mufting As Per Approved Drawing; The Work Shall Include Excavation, Backfilling, Proper Ramming, And Curing Complete In All Respects With All Required Materials; The Scope Further Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Executing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Laying Of 33 Kv Ht Xlpe Cable Of Size 3×300Sq.Mm Underground Through Manual Method Digging Briks And Sands, Including Proper Dressing And Positioning Of Cable, Leaving Adequate Spare Cable In Loop Shape At Both Ends As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Cable Pulling Equipment, Alignment, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor; Measurement Shall Be Made On Actual Length Of Cable Laid At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Laying Of 140 Mm Dia (O/D) Pn-4, Pe-80 Grade, Uv Stabilized Hdpe Pipe In Standard Lengths (6 M Each) By Hdd Method For Laying Of Underground Cable, Complete In All Respects As Per Relevant Is Specifications And Directions Of The Site In-Charge; The Scope Of Work Includes Formation Of Entry And Exit Pits, Drilling With Suitable Machinery And Drilling Fluid, Alignment, Jointing, Insertion Of Pipe, Protection Of Existing Utilities, And Complete Site Restoration; The Work Also Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Materials, Safety Arrangements And All Allied Works Required For Proper Execution; The Contractor Shall Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Laying Of 33 Kv Ht Xlpe Cable Of Size 3×300Sq.Mm Including Proper Dressing And Positioning Of Cable, Leaving Adequate Spare Cable In Loop Shape At Both Ends As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Cable Pulling Equipment, Alignment, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor; Measurement Shall Be Made On Actual Length Of Cable Laid At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing And Fixing Of All Types Of Clamps Including F-Type Clamps, Holding Clamps, Cross-Arm Clamps, Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of M.S. Channel 100X50x5mm And M.S. Angle 65X65x6mm Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , M.S. Channel 125X65x6mm , M.S. Angle 65X65x6mm , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Safe De-Erection And Dismantling Of Existing/Old Electrical Materials At Site, Including Careful Removal Without Damage To Reusable Items, And Carriage Of Dismantled Materials From Site Of Work To Electricity Store Centre, Hapur, With Loading And Unloading At Both Ends Over Kachha And Pakka Roads, Strictly As Per Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Transportation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Installation Of Increasing Cap. 100-250 Kva Dt In B.Plan 2026-27 Scheme At Various Site Of Edd-I Hapur, Under Edc Hapur (10 No. Work) (Dpr N0. 476, 477, 478, 482, 483, 485, 487, 492, 496 & 581 ) , Safe Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Plain Cement Concrete Pole 8.5M Long , 11/0.440 Kv 250 Kva Dt , Lt Ab Cable 3X120+1X95+1X16 Sqmm , Lt Pvc Alu. 1X240 Sqmm , Lt Pvc Alu. 3.5X400 Sqmm , 11Kv Polymeric Pin Insulator With Pin , 11Kv Disc Insulator T&C Type 45 Kn With Fitting , Earthing Complete , Stay Set Complete , 11 Fuse Set , Erection And Fixing Of Double Pole Structure For Plain Cement Concrete Pole 8.5 Mtr 11Kv Ht Line Including Excavation Of Suitable Size Pits, Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Grouting Of Plain Cement Concrete Pole 8.5 Mtr Supports In cement concrete 1:4:8 (Cement, Sand & 40 Mm Brick Ballast) In Block Size 450×450 Mm Up To 1/6Th Depth Of Full Length Of Support Below Ground Level And 300 Mm Above Ground Level (Plinth), Using cement concrete 1:4:8 (Cement, Coarse Sand And Stone Grit) Including Mufting As Per Approved Drawing; The Work Shall Include Excavation, Backfilling, Proper Ramming, And Curing Complete In All Respects With All Required Materials; The Scope Further Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Executing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of M.S. Channel 100X50x5mm And M.S. Angle 65X65x6mm Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of All Types Of Double Pole Clamps Including, Holding Clamps, Top Channel Clamps, Dropper Channel Clamps Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Follwings Petty Meterial As Per As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Barbed Wire , 11 Kv Danger Board , Providing & Fixing Of High Quality Long Barrel Al. Lugs Off Size. Each Lug Must Be Crimp By Proper Crimping Tool As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of High Quality Henley Type Tailless Unit Protection Cubical Panel 500A, 650V For 250 Kva Dt Including Fixing Of All Accessories By Providing All Required Materials Such As Long Barrel Lugs, Glands, Nuts & Bolts Etc.) Each Lug Must Be Crimp By Proper Crimping Tool As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv D.O. Fuse Set Protection Unit For 250 Kva Dt Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Lugs, Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Safely Installation Of 11/0.440 Kva 250 Dt With The Help Of Crane/Manual Labour At Lt Sub-Station Double Pole By Providing Proper Size Aluminium Long Barel Lug For Ht/Lt As Per Direction Of Site Incharge. , Laying Of Lt Abc 3X120+1X95+1X16 Sqmm Using Suspension Clamps, I-Hook And Dead End Clamp Inculding Jumpering Work With Peircing Connector, Cable Connection With Distribution Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Erection And Laying Of Lt Pvc Alu. 1X240 Sqmm Inculding Proper Connection With Long Barrel Lug, Proper 3 Nos Crimping On Each Lug, Lt Fuse Set/Smc Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Fixing And Grauting Of Stay Rods (16X1800)Mm Including All Work Of Excavation, Cement Concrete In Size (0.60X0.60X0.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing/Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Stay Set And Stay Wire Will Be Provided By Department. , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing And Erection Of Chemical Earthing For Neutral Of Dt With Gi Strip 50X6mm Including Excavation Of Pit And Using Necessary Chemical And Electrode To Obtain Results ≤ 1 Ohm, 3M Apart From Support, Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Strip & Earthing Lugs, Nut And Bolts As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing & Fixing Of Coper L-Piece 50X225x10 Mm (Ls) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Coper L-Piece 50X225x10 Mm (Ls) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Construction Of Tif Plinth Suitable For 250Kva (Size Of 2X2x 1.5 Mtr.) As Per Drawing, cement concrete Work In Foundation In Ratio 1:4:8 (Cement, Sand & Brick Ballast). 1St Class Brick Work In Side Walls cement concrete Ratio Of 1:4 (Cement & Fine Sand). 12Mm Thick Plaster In Ratio 1:4 (Cement & Fine Sand). The Reinforced Cement Concrete Work On Top Of Plinth In Ratio 1:2:4 Are Duly Filling Of Brick Ballast Inside The Plinth & Ramming The Same, Including Cost Of All Material & Labour, As Per Direction O Site Incharge. , Provinding & Fixing Of Safety Fencing (Ms) For 11/0.4 Kv, 250Kva Dt, With Supply Of Material Required For Ms Fencing Upto Dt Upper Level By Constructing 1 Feet Masnary Wall With Bricks & 4X8 Feet Frames Bolted And Welded Alongwith, The construction Of Frames With 75X75x6 Mm Corrosion Free Ms Angle, 8 Swg M.S. Gi Wire Mess Corrosion Free Made Of Construction Utilizing Vertical Post Duly Grouted/Fitted In Ground/On Floor. Horizontal Angle To Be Fitted On Vertical Posts. And Dual Door Gate To Facilitate Entry And Exit With Locking Arrangements. The Vertical Posts/Horizontal Post Shall Be Made Of M.S. Gi Angle . Such Post Shall Be Grounded With cement concrete Ratio 1:4:8. The Length Of Vertical Post Shall Be Sufficient To Take Care Of Fencing As Requirement At Site, And As Per Direction Of Site Incharge. (All Metalic Materilas Should Be Galvanized & Corrosion Free) , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Safe Dismentling And Carriage Of Old & Used 11/0.440 Kv 100 Kva Dt From Site To Electricity Store Centre At Hapur Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Installation Of Increasing Cap. 25-100 Kva Dt In B.Plan 2026-27 Scheme At Various Site Of Edd-I Hapur, Under Edc Hapur (5 No. Work) (Dpr N0. 535, 540, 541, 542 & 547) , Safe Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Plain Cement Concrete Pole 8.5M Long , 11/0.440 Kv 100 Kva Dt , Lt Ab Cable 3X120+1X95+1X16 Sqmm , Lt Ab Cable 3X95+1X70+1X16 Sqmm , Lt Pvc Alu. 3.5X150 /70 Sqmm , Earthing Complete , Stay Set Complete , Lt Distributon Box , 11 Fuse Set , Erection And Fixing Of Single Pole Structure For Plain Cement Concrete Pole 8.5 Mtr 11Kv Ht Line Including Excavation Of Suitable Size Pits, Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Grouting Of Plain Cement Concrete Pole 8.5 Mtr Supports In cement concrete 1:4:8 (Cement, Sand & 40 Mm Brick Ballast) In Block Size 450×450 Mm Up To 1/6Th Depth Of Full Length Of Support Below Ground Level And 300 Mm Above Ground Level (Plinth), Using cement concrete 1:4:8 (Cement, Coarse Sand And Stone Grit) Including Mufting As Per Approved Drawing; The Work Shall Include Excavation, Backfilling, Proper Ramming, And Curing Complete In All Respects With All Required Materials; The Scope Further Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Executing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of All Types Of Single Pole Clamps Including, Holding Clamps, Top Channel Clamps, Dropper Channel Clamps Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Follwings Petty Meterial As Per As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Suspension Clamps , I-Hook , Peircing Connector 95 Sqmm , Barbed Wire , 11 Kv Danger Board , Providing & Fixing Of Lt Fuse Set Protection Unit For 100 Kva Dt With Smc Box Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv D.O. Fuse Set Protection Unit For 250 Kva Dt Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Lugs, Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Safely Installation Of 11/0.440 Kva 100 Dt With The Help Of Crane/Manual Labour At Lt Sub-Station Double Pole By Providing Proper Size Aluminium Long Barel Lug For Ht/Lt As Per Direction Of Site Incharge. , Laying Of Lt Abc 3X120+1X95+1X16 Sqmm Using Suspension Clamps, I-Hook And Dead End Clamp Inculding Jumpering Work With Peircing Connector, Cable Connection With Distribution Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Laying Of Lt Abc 3X95+1X70+1X16 Sqmm Using Suspension Clamps, I-Hook And Dead End Clamp Inculding Jumpering Work With Peircing Connector, Cable Connection With Distribution Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Erection And Laying Of Lt Pvc Alu. 3.5X150/70 Sqmm Inculding Proper Connection With Long Barrel Lug, Proper 3 Nos Crimping On Each Lug, Lt Fuse Set/Smc Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Fixing And Grauting Of Stay Rods (16X1800)Mm Including All Work Of Excavation, Cement Concrete In Size (0.60X0.60X0.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing/Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Stay Set And Stay Wire Will Be Provided By Department. , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Repalacement Of 33 Kv Vcb In B.Plan 2026-27 Scheme At 33/11 Kv Rampur Road S/S, Edd-I Hapur, Under Edc Hapur (01 No. Work) (Dpr N0. 19) , Safe Carriage Of 33 Kv Vcb 800A, 750Mva With Steel Structure From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Erection Of 33 Kv Vcb 800A, 750Mva With Steel Structure In 33/11 Kv Rampur Road S/S Inculding Connection Of Control Cables Etc. The Steel Structure Must Be Connected With Existing Earthing By 50X6 Mm Gi Strip As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Gi Strip Shall Be Provided By Contractor , Providing And Fixing Of 4X2.5 Sqmm Copper Control Cable In Switch Yard Though Trench And Upto Vcb Panel As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
36.
Power #11314308 Price Bid
Tender for Installation Of 100 Kva Additonal Tf In B.Plan 2026-27 Scheme At Various Site Of Edd-I Hapur, Under Edc Hapur (10 No. Work) (Dpr N0. 106, 108, 109, 110, 111, 112, 113, 114, 115 & 116 ) , Safe Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Plain Cement Concrete Pole 11.0M Long , 11/0.440 Kv 100 Kva Dt , Acsr Weasel Conductor , Lt Ab Cable 3X120+1X95+1X16 Sqmm , Lt Ab Cable 3X95+1X70+1X16 Sqmm , Lt Pvc Alu. 3.5X150/70 Sqmm , 11Kv Polymeric Pin Insulator With Pin , 11Kv Disc Insulator T&C Type 45 Kn With Fitting , Earthing Complete , Stay Rod , Stay Wire 7/10 Swg. , Erection And Fixing Of Double Pole Structure For Plain Cement Concrete Pole 11 Mtr 11Kv Ht Line Including Excavation Of Suitable Size Pits, Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Grouting Of Plain Cement Concrete Pole 11 Mtr Supports In cement concrete 1:4:8 (Cement, Sand & 40 Mm Brick Ballast) In Block Size 450×450 Mm Up To 1/6Th Depth Of Full Length Of Support Below Ground Level And 300 Mm Above Ground Level (Plinth), Using cement concrete 1:4:8 (Cement, Coarse Sand And Stone Grit) Including Mufting As Per Approved Drawing; The Work Shall Include Excavation, Backfilling, Proper Ramming, And Curing Complete In All Respects With All Required Materials; The Scope Further Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Executing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of M.S. Channel 100X50x5mm And M.S. Angle 65X65x6mm Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , M.S. Channel 100X50x5mm , M.S. Angle 65X65x6mm , Providing And Fixing Of All Types Of Double Pole Clamps Including, Holding Clamps, Top Channel Clamps, Dropper Channel Clamps Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Follwings Petty Meterial As Per As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Suspension Clamps , I-Hook , Peircing Connector , Barbed Wire , 11 Kv Danger Board , Providing & Fixing Of Lt Fuse Set Protection Unit For 100 Kva Dt With Smc Box Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv D.O. Fuse Set Protection Unit For 100 Kva Dt Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Safely Installation Of 11/0.440 Kva 100 Dt With The Help Of Crane/Manual Labour At Lt Sub-Station Double Pole By Providing Proper Size Aluminium Long Barel Lug For Ht/Lt As Per Direction Of Site Incharge. , Laying Of Lt Abc 3X120+1X95+1X16 Sqmm Using Suspension Clamps, I-Hook And Dead End Clamp Inculding Jumpering Work With Peircing Connector, Cable Connection With Distribution Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Laying Of Lt Abc 3X95+1X70+1X16 Sqmm Using Suspension Clamps, I-Hook And Dead End Clamp Inculding Jumpering Work With Peircing Connector, Cable Connection With Distribution Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Erection And Laying Of Lt Pvc Al 3.5X150/70 Sqmm Inculding Proper Connection With Long Barrel Lug, Proper 3 Nos Crimping On Each Lug, Lt Fuse Set/Smc Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Fixing And Grauting Of Stay Rods (16X1800)Mm Including All Work Of Excavation, Cement Concrete In Size (0.60X0.60X0.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing/Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Stay Set And Stay Wire Will Be Provided By Department. , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Providing And Fixing Of G.I. Strip Of Size 50 Mm × 6 Mm For Connection Of Transformer, Including Cutting, Bending, Drilling, Welding/Bolting, Clamping, And Proper Jointing With Required Nuts, Bolts, Washers, Clamps, And All Necessary Materials, Labour, Tools & Plants For Complete And Satisfactory Execution Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Earthing Of Supports And Neutral Of Dt With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Earthing Of Dt In B.Plan 2026-27 Scheme At Various Site Of Edd-I Hapur, Under Edc Hapur (2 No. Work) (Dpr N0. 57 & 58) , Safe Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Earthing Rod , Gi Wire 6 Swg , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing, Supplying, And Fixing Of Heavy-Duty Nuts And Bolts Of Approved Make And Grade, Complete With Two Numbers Plane Washers And One Number Heavy-Duty Spring Washer Per Assembly, Conforming Strictly To Relevant Is Specifications And Respo Drawing Norms; Scope Of Work Includes Material Supply, Transportation, Precise Positioning, Alignment, And Rigid Tightening To Specified Engineering Torque Limits On Electrical Structures, Steel Poles, Cross-Arms, Or Substation Equipment, Inclusive Of Rust-Preventive Primer/Paint Coatings Where Required, All Handling Labor, Tools, Tackles, Scaffolding, Staging, Leads, And Lifts At Any Height, Executed Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing And Erection Of Chemical Earthing For Neutral Of Dt With Gi Strip 50X6mm Including Excavation Of Pit And Using Necessary Chemical And Electrode To Obtain Results ≤ 1 Ohm, 3M Apart From Support, Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Strip 50X6 Mm & Earthing Lugs, Nut And Bolts As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Supply And Delivery Of Heavy-Duty 4-Ton Capacity Transformer Handling Trolley (12 X 6) Complete With Tyres, Stabilization Jacks, Mesh Safety Fencing, And Dual Gates As Per Technical Specifications. detail project report 99, 100, 101 , Providing And Safe Delivery Of Heavy-Duty Transformer Handling Trolley Complete In All Respects As Per Approved Specifications And Directions Of Engineer-In-Charge. The Trolley Shall Be Fabricated With Overall Outer Dimensions Of 12 Feet Length × 6 Feet Width Using Heavy-Duty M.S. Structural Sections And Designed For Minimum Load Carrying Capacity Of 4 Tons Without Bending, Deformation, Or Structural Failure. The Platform Shall Have Minimum Structural Depth Of 6 Inches Fabricated With Heavy-Duty M.S. Plates Supported On Rigid Internal Frame Suitable For Handling Static And Dynamic Transformer Loads During Lifting, Shifting, Transportation, And Storage. The Trolley Shall Maintain Uniform Minimum Ground Clearance Of 3.5 Feet From Bottom Of Main Frame To Ground Level And Shall Be Provided With Side Retaining Walls Of Minimum 32 Inches Height Above Platform Level. Complete Safety Fencing Of 6 Feet Height Fabricated With Alloy M.S. Mesh Securely Welded To Structural Frame Along With Continuous 0.5-Foot M.S. Angle Reinforcement At Top Perimeter Shall Be Provided On All Four Sides. One Front Gate And One Rear Gate Each Of Minimum 6 Feet Width Complete With Heavy-Duty Hinges And Locking Arrangement Shall Also Be Provided For Loading And Unloading Purposes. The Main Longitudinal Frame Members Shall Be Fabricated Using 100 Mm × 50 Mm M.S. Channels And Cross Members Using 75 Mm × 40 Mm M.S. Channels Placed At Suitable Spacing For Uniform Load Distribution. The Trolley Shall Be Complete With Axle And Wheel Assembly Comprising Two Nos. Heavy-Duty 65 Mm Dia Steel Axles, Four Nos. Tyres Size 7 × 50 × 16, Four Nos. Heavy-Gauge Steel Rims Size 7 × 50 × 16, Heavy-Duty 36-Inch Bearing Arrangement, And Four Nos. Jack Punches With Chudi Size 12 × 50 Mm Dia At Each Corner For Stabilization During Loading And Unloading Operations. All Fabrication Work Shall Be Carried Out With High-Quality Arc/Co₂ Welding And All Joints Shall Be Properly Finished, Ground Smooth, And Free From Cracks, Porosity, And Defects. The Complete Structure Shall Be Cleaned Thoroughly And Painted With One Coat Of Red Oxide Primer Followed By Two Coats Of Approved Industrial Enamel Paint. All Materials Including M.S. Plates, Channels, Angles, Mesh, Tyres, Rims, Bearings, And Welding Consumables Shall Be Brand New And Conform To Relevant Is Specifications. The Completed Trolley Shall Be Inspected By Competent Authority And Any Defects Shall Be Rectified By Contractor At No Extra Construction The Rate Shall Include Cost Of All Materials, Labour, T&P, Fabrication, Fitting, Welding, Painting, Transportation, Loading, Unloading, Testing, Inspection, And Delivery Complete In Ready-To-Use Condition. Unit: Each (No.).
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
37.
Power #11314307 Price Bid
Tender for Strenthning Of 11 Kv Line B.Plan 2026-27 Scheme At Various Site Of Edd-Hapur, Under Edc Hapur (17 No. Work) (Dpr N0. 44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60) , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Plain Cement Concrete Pole 11.0M Long , Plain Cement Concrete Pole 8.5M Long , Acsr Weasel Conductor , Acsr Rabbit Conductor , Acsr Dog Conductor , 11Kv Xlpe Cable 3X120 Sqmm , 11Kv Xlpe Cable 3X185 Sqmm , 11Kv Termination Kit 3X185 Sqmm O/D , 11Kv Termination Kit 3X120 Sqmm I/D , 11Kv Termination Kit 3X120 Sqmm O/D , 11Kv Polymeric Pin Insulator With Pin , 11Kv Polymeric Disc Insulator With Fitting , 11Kv V-Type Cross Arm , Earthing Rod , G.I. Wire 6Swg , G.I. Wire 8Swg , Stay Set , Stay Wire 7/10 Swg. , Erection And Fixing Of The Following Materials As Per Relevant Respo/Departmental Norms And Specifications, Including Proper Installation, Alignment, Tightening, And Commissioning At Site. The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration, Along With Responsibility Of The Contractor For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Directions Of Engineer-In-Charge , 11Kv Termination Kit 3X120 Sqmm I/D , 11Kv Termination Kit 3X120 Sqmm O/D , 11Kv Polymeric Pin Insulator With Pin , 11Kv Polymeric Disc Insulator With Fitting , 11Kv V-Type Cross Arm , Erection And Fixing Of Pole Structure For 11Kv Ht Line Including Excavation Of Suitable Size Pits, Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Plain Cement Concrete Pole 8.5 Mtr , Plain Cement Concrete Pole 11 Mtr , Grouting Of St/Pcc Supports In cement concrete 1:3:6 (Cement, Sand & 40 Mm Brick Ballast) In Block Size 450×450 Mm Up To 1/6Th Depth Of Full Length Of Support Below Ground Level And 300 Mm Above Ground Level (Plinth), Using cement concrete 1:3:6 (Cement, Coarse Sand And Stone Grit) Including Mufting As Per Approved Drawing; The Work Shall Include Excavation, Backfilling, Proper Ramming, And Curing Complete In All Respects With All Required Materials; The Scope Further Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Executing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Plain Cement Concrete Pole 8.5 Mtr , Plain Cement Concrete Pole 11 Mtr , Laying, Stringing And Final Sagging Of Acsr Weasel/Rabbit/Dog Conductor Complete In All Respects, Including Proper Tensioning, Alignment And Dressing Of Conductor Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Use Of Stringing Equipment, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Acsr Weasel Conductor , Acsr Rabbit Conductor , Acsr Dog Conductor , Laying Of 11 Kv Ht Xlpe Cable Of Size 3×120Sq.Mm Underground Through Manual Method Digging Briks And Sands, Including Proper Dressing And Positioning Of Cable, Leaving Adequate Spare Cable In Loop Shape At Both Ends As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Cable Pulling Equipment, Alignment, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor; Measurement Shall Be Made On Actual Length Of Cable Laid At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Laying Of 140 Mm Dia (O/D) Pn-4, Pe-80 Grade, Uv Stabilized Hdpe Pipe In Standard Lengths (6 M Each) By Hdd Method For Laying Of Underground Cable, Complete In All Respects As Per Relevant Is Specifications And Directions Of The Site In-Charge; The Scope Of Work Includes Formation Of Entry And Exit Pits, Drilling With Suitable Machinery And Drilling Fluid, Alignment, Jointing, Insertion Of Pipe, Protection Of Existing Utilities, And Complete Site Restoration; The Work Also Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Materials, Safety Arrangements And All Allied Works Required For Proper Execution; The Contractor Shall Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Laying Of 11 Kv Ht Xlpe Cable Of Size 3×185Sq.Mm In Hdpi Pipe By Safly Pulling, Proper Dressing And Positioning Of Cable, Leaving Adequate Spare Cable In Loop Shape At Both Ends As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Cable Pulling Equipment, Alignment, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor; Measurement Shall Be Made On Actual Length Of Cable Laid At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Gi Pipe 6 Inch Dia Along With Suitable Clamps, Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Fixing And Grauting Of Stay Rods (16X1800)Mm Including All Work Of Excavation, Cement Concrete In Size (0.60X0.60X0.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing/Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Stay Set And Stay Wire Will Be Provided By Department. , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing And Fixing Of All Types Of Clamps Including F-Type Clamps, Holding Clamps, Cross-Arm Clamps, Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of M.S. Channel 100X50x5mm And M.S. Angle 65X65x6mm Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , M.S. Channel 100X50x5mm , M.S. Angle 65X65x6mm , Providing And Fixing Guarding Angle Size 50*50*5 And Other Requisites Material For Guarding By Drawing 02Nos G.I Wire And Making Loop At Suitable Distance As Per Respo Drawing/Norms By Providing Holding Clamps, 02Nos. Eye Bolts Made Of M.S. Round Size 12Mm Dia-100Mm Long & Cross Arm Clamps Made Of M.S. Flat Of Size 50X6mm And Bolts As Per Norms Of Respo Norms, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. As Per Direction Of Site Incharge. (Gi Wire Will Be Provided By Department). , Providing And Installation Of Maintenance-Free, Multifaceted, Corrosion-Resistance Free Gi Pipe Earthing Upto Water Level Pipe Dia 2 Inch 80Feet. Providing And Fixing Of Gi Earth Strip Size 50Mm*6Mm For Connection (The Strip To Be Properly Welded To The Earthing Electrode And Neutral Support), Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Excavation, Installation, Welding, Connection, Testing, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Safe Dismantling Of Existing/Old Electrical Materials At Site, Including Careful Removal Without Damage To Reusable Items, And Carriage Of Dismantled Materials From Site Of Work To Electricity Store Centre, Hapur, With Loading And Unloading At Both Ends Over Kachha And Pakka Roads, Strictly As Per Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Transportation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Construction Of 11 Kv Line B.Plan 2026-27 Scheme At Various Site Of Edd-Hapur, Under Edc Hapur (01 No. Work) (Dpr N0. 69) , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Plain Cement Concrete Pole 8.5M Long , 11Kv Xlpe Cable 3X185 Sqmm , 11Kv Termination Kit 3X185 Sqmm O/D , 11Kv Polymeric Pin Insulator With Pin , 11Kv V-Type Cross Arm , Earthing Complete , Erection And Fixing Of The Following Materials As Per Relevant Respo/Departmental Norms And Specifications, Including Proper Installation, Alignment, Tightening, And Commissioning At Site. The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration, Along With Responsibility Of The Contractor For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Directions Of Engineer-In-Charge , 11Kv Termination Kit 3X185 Sqmm O/D , 11Kv Polymeric Pin Insulator With Pin , 11Kv V-Type Cross Arm , Erection And Fixing Of Pole Structure For Plain Cement Concrete Pole 8.5 Mtr 11Kv Ht Line Including Excavation Of Suitable Size Pits, Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Grouting Of Plain Cement Concrete Pole 8.5 Mtr Supports In cement concrete 1:3:6 (Cement, Sand & 40 Mm Brick Ballast) In Block Size 450×450 Mm Up To 1/6Th Depth Of Full Length Of Support Below Ground Level And 300 Mm Above Ground Level (Plinth), Using cement concrete 1:3:6 (Cement, Coarse Sand And Stone Grit) Including Mufting As Per Approved Drawing; The Work Shall Include Excavation, Backfilling, Proper Ramming, And Curing Complete In All Respects With All Required Materials; The Scope Further Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Executing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Digging Of Trech As Per Respo Drawings/Standard Norms For 11 Kv Ht Xlpe Cable Of Size 3×185Sq.Mm Underground Through Manual Method Digging Briks And Sands, Including Proper Dressing And Positioning Of Cable, Leaving Adequate Spare Cable In Loop Shape At Both Ends As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Cable Pulling Equipment, Alignment, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor; Including Proper Installation And Commissioning At Site.Including Machinery, Drilling/Excavation, Protection Of Existing Utilities, And Complete Site Restoration, Along With Responsibility Of The Contractor For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues Measurement Shall Be Made On Actual Length Of Trech At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. And Completing The Work As Per Directions Of Engineer-In-Charge , Laying Of 11 Kv Ht Xlpe Cable Of Size 3×185Sq.Mm (Double Ckt) Underground Through Manual Method Digging Briks And Sands, Including Proper Dressing And Positioning Of Cable, Leaving Adequate Spare Cable In Loop Shape At Both Ends As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Cable Pulling Equipment, Alignment, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor; Measurement Shall Be Made On Actual Length Of Cable Laid At Site And Payment Shall Be Made Accordingly As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Gi Pipe 6 Inch Dia Along With Suitable Clamps, Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing And Fixing Of All Types Of Clamps Including F-Type Clamps, Holding Clamps, Cross-Arm Clamps, Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of M.S. Channel 100X50x5mm Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Providing And Fixing Of Gi Pipe 6 Inch Dia Along With Suitable Clamps, Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Installation Of 250 Kva Additonal Tf In B.Plan 2026-27 Scheme At Various Site Of Edd-I Hapur, Under Edc Hapur (5 No. Work) (Dpr N0. 102, 103, 104, 105 & 107 ) , Safe Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Plain Cement Concrete Pole 11.0M Long , 11/0.440 Kv 250 Kva Dt , Acsr Weasel Conductor , Lt Ab Cable 3X120+1X95+1X16 Sqmm , Lt Pvc Alu. 1X400 Sqmm , Lt Pvc Alu. 1X240 Sqmm , Lt Pvc Alu. 3.5X400 Sqmm , 11Kv Polymeric Pin Insulator With Pin , 11Kv Disc Insulator T&C Type 45 Kn With Fitting , Earthing Complete , Stay Rod , 11 Fuse Set , Stay Wire 7/10 Swg. , Erection And Fixing Of Double Pole Structure For Plain Cement Concrete Pole 11 Mtr 11Kv Ht Line Including Excavation Of Suitable Size Pits, Providing And Fixing Of Shackle Insulators, And Complete Installation Of All Requisite Accessories Strictly As Per Respo Drawings/Standard Norms; Including Providing And Fixing Of Holding Clamps Made Of M.S. Flat Of Size 35×5 Mm With Suitable Nuts & Bolts, Alignment, Tightening And All Allied Works; The Scope Of Work Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, Formation Of Pits, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining All Necessary Permissions, Resolving Right Of Way (Row) Issues, And Completing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Grouting Of Plain Cement Concrete Pole 11 Mtr Supports In cement concrete 1:4:8 (Cement, Sand & 40 Mm Brick Ballast) In Block Size 450×450 Mm Up To 1/6Th Depth Of Full Length Of Support Below Ground Level And 300 Mm Above Ground Level (Plinth), Using cement concrete 1:4:8 (Cement, Coarse Sand And Stone Grit) Including Mufting As Per Approved Drawing; The Work Shall Include Excavation, Backfilling, Proper Ramming, And Curing Complete In All Respects With All Required Materials; The Scope Further Includes Cost Of All Labour, Tools & Plants (T&P), Machinery, Drilling/Excavation, Safety Arrangements, Protection Of Existing Utilities, And Complete Site Restoration; The Contractor Shall Also Be Responsible For Obtaining Necessary Permissions, Resolving Right Of Way (Row) Issues, And Executing The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of M.S. Channel 100X50x5mm And M.S. Angle 65X65x6mm Complete In All Respects, Including Proper Mounting, Alignment And Tightening With All Required Accessories, Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of All Types Of Double Pole Clamps Including, Holding Clamps, Top Channel Clamps, Dropper Channel Clamps Etc., Along With Suitable Nuts & Bolts, Complete In All Respects Strictly As Per Respo Drawings/Standard Norms And Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Installation, Alignment, Tightening, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing And Fixing Of Danger Board Of Approved Design And Size, Made Of Suitable Weatherproof Material With Required Painting And Lettering, Including Fixing On Pole/Structure With Nuts, Bolts, Clamps And All Necessary Labour, Tools & Plants For Complete And Satisfactory Execution Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Providing & Fixing Of High Quality 3 Phase 4 Wire 440V, 400A, ≥ 35Ka, With Overload Short Ckt And Earth Falt Protection, Outdoor Type, Weather Proof Lt Mcb With Box With Locking Arrangement For 11/0.440Kv, 250 Kva Dt With Long Barrel Al. Lugs Off Size. Each Lug Must Be Crimp By Proper Crimping Tool As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of High Quality Long Barrel Al. Lugs Off Size. Each Lug Must Be Crimp By Proper Crimping Tool As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of High Quality Henley Type Tailless Unit Protection Cubical Panel 500A, 650V For 250 Kva Dt Including Fixing Of All Accessories By Providing All Required Materials Such As Long Barrel Lugs, Glands, Nuts & Bolts Etc.) Each Lug Must Be Crimp By Proper Crimping Tool As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv D.O. Fuse Set Protection Unit For 250 Kva Dt Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Lugs, Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Safely Installation Of 11/0.440 Kva 250 Dt With The Help Of Crane/Manual Labour At Lt Sub-Station Double Pole By Providing Proper Size Aluminium Long Barel Lug For Ht/Lt As Per Direction Of Site Incharge. , Laying Of Lt Abc 3X120+1X95+1X16 Sqmm Using Suspension Clamps, I-Hook And Dead End Clamp Inculding Jumpering Work With Peircing Connector, Cable Connection With Distribution Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Erection And Laying Of Lt Pvc Inculding Proper Connection With Long Barrel Lug, Proper 3 Nos Crimping On Each Lug, Lt Fuse Set/Smc Box For Proper Completion Of Work As Per Respo Norms, And As Per Direction Of Site Incharge. , Lt Pvc Alu. 1X400 Sqmm , Lt Pvc Alu. 1X240 Sqmm , Lt Pvc Alu. 3.5X400 Sqmm , Fixing And Grauting Of Stay Rods (16X1800)Mm Including All Work Of Excavation, Cement Concrete In Size (0.60X0.60X0.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing/Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works And Materials Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Stay Set And Stay Wire Will Be Provided By Department. , Earthing Of Supports With Ms Earth Rod Of (20X2540)Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs, Nut And Botls As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. Only Earth Rod And Gi Wire Will Be Provided By Department. , Providing And Erection Of Chemical Earthing For Neutral Of Dt With Gi Strip 50X6mm Including Excavation Of Pit And Using Necessary Chemical And Electrode To Obtain Results ≤ 1 Ohm, 3M Apart From Support, Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Strip & Earthing Lugs, Nut And Bolts As Per Respo Drawing/Norms Includes All Labour, Tools & Plants (T&P), Fabrication, Fitting, Alignment, Tightening, Safety Arrangements And All Allied Works Will Be Provided By Contractor, As Per Departmental Standards And Directions Of The Engineer-In-Charge. , Providing & Fixing Of Coper L-Piece 50X225x10 Mm (Ls) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Coper L-Piece 50X225x10 Mm (Ls) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Construction Of Tif Plinth Suitable For 250Kva (Size Of 2X2x 1.5 Mtr.) As Per Drawing, cement concrete Work In Foundation In Ratio 1:4:8 (Cement, Sand & Brick Ballast). 1St Class Brick Work In Side Walls cement concrete Ratio Of 1:4 (Cement & Fine Sand). 12Mm Thick Plaster In Ratio 1:4 (Cement & Fine Sand). The Reinforced Cement Concrete Work On Top Of Plinth In Ratio 1:2:4 Are Duly Filling Of Brick Ballast Inside The Plinth & Ramming The Same, Including Cost Of All Material & Labour, As Per Direction O Site Incharge. , Provinding & Fixing Of Safety Fencing (Ms) For 11/0.4 Kv, 250Kva Dt, With Supply Of Material Required For Ms Fencing Upto Dt Upper Level By Constructing 1 Feet Masnary Wall With Bricks & 4X8 Feet Frames Bolted And Welded Alongwith, The construction Of Frames With 75X75x6 Mm Corrosion Free Ms Angle, 8 Swg M.S. Gi Wire Mess Corrosion Free Made Of Construction Utilizing Vertical Post Duly Grouted/Fitted In Ground/On Floor. Horizontal Angle To Be Fitted On Vertical Posts. And Dual Door Gate To Facilitate Entry And Exit With Locking Arrangements. The Vertical Posts/Horizontal Post Shall Be Made Of M.S. Gi Angle . Such Post Shall Be Grounded With cement concrete Ratio 1:4:8. The Length Of Vertical Post Shall Be Sufficient To Take Care Of Fencing As Requirement At Site, And As Per Direction Of Site Incharge. (All Metalic Materilas Should Be Galvanized & Corrosion Free) , Providing And Fixing Of All Types Of Clamps Suitable For Electrical Line/Equipment Works, Including Supply Of Approved Quality Clamps, Nuts, Bolts, Washers, Fabrication, Fitting, Tightening, And All Necessary Labour, Tools & Plants Required For Complete And Satisfactory Execution Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
38.
Power #11314305 Price Bid
Tender for 11 Kv Line Bifercation Amba Panel Industrial In B.Plan 2026-27 Scheme, In The Jurisdiction Of Edd-Garh Under Edc Hapur. (01 No Work) detail project report 71 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Disc Fitting 45 Kn , Acsr Dog Conductor , 11 Kv completion Poly. Pin Insulator , Stay Set , 11 Kv completion Poly. Disc Insulator 45 Kn , 11 Kv Vcb Outgoing , Gi X-Arm Angle , 11 Kv Cable Box O/D Type Size 3X120 Sq.Mm , 11 Kv Ht Xlpe Cable 3X120 Sq.Mm. , Laying, Stringing And Final Sagging Of Acsr Dog Conductor Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And E-Brackets, Wherever Required, As Per Respo/Drawing Norms, Including All Labour, Tools & Plants, Handling, Hoisting And Allied Works For Proper Completion Of Work As Directed By The Engineer-In-Charge , Grouting And Fixing Of Stay Rod Of Size 20 × 1800 Mm Complete In All Respects, Including Excavation, Providing And Laying Cement Concrete Of Size 0.60 × 0.60 × 0.30 M In Ratio 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded 40 Mm Brick Ballast), Backfilling, Proper Ramming, Fixing, Tightening And Nozzling Of Stay Wire With Stay Rod And Pole To The Required Tension As Per Respo Drawings/Norms, Including Providing And Fixing Stay Clamp Made Of M.S. Flat Of Size 50 × 6 Mm With Suitable Nuts, Bolts And Loops, And All Labour, Tools & Plants And Grouting Material As Directed By The Engineer-In-Charge. , Making And Filling Of 11 Kv Xlpe Cable Jointing Kit Suitable For 3 × 120 Sq.Mm Cable, Complete In All Respects, Including Proper Plumbing And Taping Of Xlpe Cable, Providing, Fixing And Crimping Of Suitable Size Approved Quality Lugs, Including Cost Of Lugs, Tapes And All Jointing Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Per Respo Norms And Directions Of The Engineer-In-Charge. , Installing, Testing And Commissioning Of 11 Kv Vcb Outgoing Panel Complete In All Respects, Including Mounting, Alignment, Interconnection, Control Wiring, Earthing, Nuts, Bolts, Clamps And All Associated Accessories, Labour, Tools & Plants Required For Proper Installation And Satisfactory Operation As Per Approved Drawings, Departmental Specifications And Directions Of The Engineer-In-Charge , Providing, Fabricating And Fixing Of Side Bracket Made Of M.S. Channel And M.S. Angle, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, Complete In All Respects As Per Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work.. , Erection Of 11 Kv V-Type Cross Arm Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Erection Of 11 Kv Pin Insulator Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Erection Of 11 Kv Disc Insulator With Fittings Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of T-Off Clamp Complete With Suitable Nuts, Bolts And All Associated Accessories, As Per Respo Norms/Approved Drawings, Including All Labour, Tools & Plants Required For Proper Installation And Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , 33 Kv Line Strengthing In B.Plan 2026-27 Scheme, In The Jurisdiction Of Edd-Garh Under Edc Hapur. (03 No Work) 17,18,19 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Acsr Dog Conductor , Earth Rod , 33 Kv completion Poly. Pin Insulator , Plain Cement Concrete Pole 11 Mtr. , Stay Set , Stay Wire , Gi Wire 4Mm/8Swg , 33 Kv Cross Arm 100X50 Mm , 33 Kv Cable Box O/D Type Size 3X300 , 33 Kv Xlpe Cable Type Size 3X300 Sq.Mm. , Erection And Fixing Of The Following Materials Complete In All Respects, Including All Required T&P, Labour, Handling, Lifting, Fastening And Allied Works For Proper Installation As Per Departmental Specifications, Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , 33 Kv completion Poly. Pin Insulator , Stay Wire , Gi Wire 4Mm/8Swg , Erection And Fixing Of Single Plain Cement Concrete Pole, 11 Mtr Long, For 11 Kv Line Complete In All Respects, Including Digging Of Suitable Pit, Positioning, Alignment, Dressing And Fixing Of Requisite Accessories As Per Respo Drawings/Norms, Including Providing And Fixing Of F-Bracket Made Of M.S. Flat Of Size 50 × 6 Mm, Holding Clamps Made Of M.S. Flat Of Size 50 × 6 Mm With Suitable Nuts And Bolts, And All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying, Stringing And Final Sagging Of Acsr Dog Conductor Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And E-Brackets Wherever Required, As Per Respo/Drawing Norms, Including All Labour, Tools & Plants, Handling, Hoisting And Allied Works Required For Proper Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Grouting And Fixing Of Stay Rod Of Size 20 × 1800 Mm Complete In All Respects, Including Excavation, Providing And Laying Cement Concrete Of Size 0.60 × 0.60 × 0.30 M In Ratio 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded 40 Mm Brick Ballast) As Per Drawing, Backfilling, Proper Ramming And Allied Civil Works, Including Fixing, Tightening And Nozzling Of Stay Wire With Stay Rod And Pole To The Required Tension As Per Respo Drawings/Norms, Including Providing And Fixing Stay Clamp Made Of M.S. Flat Of Size 50 × 6 Mm With Suitable Nuts, Bolts And Loops, And All Grouting Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Earthing Of Supports With M.S. Earth Rod Of Size 20 × 2540 Mm Complete In All Respects, Including Excavation Of Pit, Driving Of M.S. Rod At A Distance Of 3.0 M From The Support And 0.5 M Below Ground Level, And Connection Of Support With Earth Electrode Using Suitable Size G.I. Wire And Earthing Lugs, Including Providing And Fixing Of Proper Size Nuts, Bolts And All Associated Accessories, As Per Respo Drawings/Norms, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Grouting Of Plain Cement Concrete Supports Complete In All Respects With Cement Concrete In Ratio 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded 40 Mm Brick Ballast) In Block Size 450 × 450 Mm Up To 1/6Th Of The Full Length Of Support Below Ground Level, Including Providing 300 Mm Plinth Above Ground Level With Cement Concrete In Ratio 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Grit) With Proper Mufting As Per Approved Drawing, Including Backfilling, Proper Ramming And Providing All Required Grouting Materials, Labour, Tools & Plants For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of 6 Inch Dia Class-B G.I. Pipe Over 33 Kv 3 × 300 Sq.Mm Xlpe Cable And Lt Xlpe Cable Before Mounting On Double Pole Structure, Complete In All Respects, Including Providing And Fixing Of Suitable Clamps, Sealing Of Top And Bottom Ends Of Pipe, Burying One End Of Pipe Approximately 500 Mm Below Ground Level, Mounting And Clamping Of Cable On Double Pole Structure, And Making Connection With Overhead Line At Both Ends, Including All Labour, Tools & Plants And Associated Materials Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Making And Filling Of 33 Kv Xlpe Cable Jointing Kit Suitable For 3 × 300 Sq.Mm Cable Complete In All Respects, Including Proper Plumbing And Taping Of Xlpe Cable, Providing, Fixing And Crimping Of Suitable Size Approved Quality Lugs, Including Cost Of Lugs, Tapes And All Jointing Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Per Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Erection Of 33 Kv V-Type Cross Arm Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Trenchless Laying Of 200 Mm O/D Pe-80, Pn-4 Grade Uv Stabilized Hdpe Pipe Conforming To Relevant Is Specifications In Standard 6 Mtr Length For Laying Of Underground Cable, Complete In All Respects As Per Respo Norms, Including Cost Of Hdpe Pipe, Jointing, Handling, Labour, Tools & Plants And All Associated Works Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of Stone Pad Complete In All Respect, Including Supply Of Approved Quality Stone Pad, Necessary Excavation, Dressing, Leveling, Proper Positioning, Packing With Sand/Soil, And All Labour, Tools, Plants, And Materials Required For Satisfactory Completion Of Work As Per Departmental Specifications And Directions Of Engineer-In-Charge. , Laying Of 33 Kv Xlpe Cable Of Size 3 × 300 Sq.Mm Underground Through Hdpe Pipe Complete In All Respects, Including Pulling, Dressing, Alignment And Leaving Spare Cable In Loop Shape At Both Ends As Per Respo Norms, Including All Labour, Tools & Plants And Associated Works Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of Holding Clamp Complete In All Respects, Including Suitable Nuts, Bolts And All Associated Accessories, As Per Respo Norms/Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Jumpering And Line Energisation Work Complete In All Respects, Including Proper Connection, Tightening, Testing And Commissioning As Per Respo Norms/Approved Drawings, Including All Labour, Tools & Plants And Associated Materials Required For Safe And Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Safe De-Erection And Dismantling Of Existing/Old Electrical Materials At Site, Including Careful Removal Without Damage To Reusable Items, And Carriage Of Dismantled Materials From Site Of Work To Electricity Store Centre, Hapur, With Loading And Unloading At Both Ends Over Kachha And Pakka Roads, Strictly As Per Directions Of The Site In-Charge; The Scope Of Work Includes All Labour, Tools & Plants (T&P), Handling, Transportation, Safety Arrangements And All Allied Works Necessary For Proper Completion Of The Work As Per Departmental Standards And Directions Of The Engineer-In-Charge. , 11 Kv Line Strengthing In B.Plan 2026-27 Scheme, In The Jurisdiction Of Edd-Garh Under Edc Hapur. (11 No Work) detail project report 61,62,63,64,65,66,67,68,69,70,71 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Disc Fitting 45 Kn , Acsr Weasel Conductor , Acsr Rabbit Conductor , Acsr Dog Conductor , Earth Rod , 11 Kv completion Poly. Pin Insulator , Plain Cement Concrete Pole 8.5 Mtr. , Plain Cement Concrete Pole 11 Mtr. , Stay Set , Stay Wire , 11 Kv completion Poly. Disc Insulator 45 Kn , Gi Wire 10Swg , Gi X-Arm Angle , 11 Kv Vtype Steel Cross Arm , 33 Kv Cable Box O/D Type Size 3X300 , 11 Kv Cable Box O/D Type Size 3X120 Sq.Mm , 33 Kv Xlpe Cable Type Size 3X300 Sq.Mm. , 11 Kv Ht Xlpe Cable 3X120 Sq.Mm. , 11 Kv Xlpe Cable 3X300 Sq.Mm. , Erection And Fixing Of The Following Materials Complete In All Respects, Including All Required T&P, Labour, Handling, Lifting, Fastening And Allied Works For Proper Installation As Per Departmental Specifications, Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Disc Fitting 45 Kn , 11 Kv completion Poly. Pin Insulator , Stay Wire , 11 Kv completion Poly. Disc Insulator 45 Kn , Gi Wire 10Swg , Gi X-Arm Angle , 33 Kv Xlpe Cable Type Size 3X300 Sq.Mm. , 11 Kv Ht Xlpe Cable 3X120 Sq.Mm. , Erection And Fixing Of Single Plain Cement Concrete Pole, 8.50 Mtr Long, For 11 Kv Line Complete In All Respects, Including Digging Of Suitable Pit, Positioning, Alignment And Fixing Of Requisite Accessories As Per Respo Drawings/Norms, Including Providing And Fixing Of F-Bracket Made Of M.S. Flat Of Size 50 × 6 Mm And Holding Clamps Made Of M.S. Flat Of Size 50 × 6 Mm With Suitable Nuts And Bolts, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying, Stringing And Final Sagging Of Acsr Dog Conductor Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And E-Brackets Wherever Required, As Per Respo/Drawing Norms, Including All Labour, Tools & Plants, Handling, Hoisting And Allied Works Required For Proper Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying, Stringing And Final Sagging Of Acsr Weasel Conductor Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And E-Brackets Wherever Required, As Per Respo/Drawing Norms, Including All Labour, Tools & Plants, Handling, Hoisting And Allied Works Required For Proper Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying, Stringing And Final Sagging Of Acsr Rabbit Conductor Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And E-Brackets Wherever Required, As Per Respo/Drawing Norms, Including All Labour, Tools & Plants, Handling, Hoisting And Allied Works Required For Proper Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Grouting And Fixing Of Stay Rod Of Size 20 × 1800 Mm Complete In All Respects, Including Excavation, Providing And Laying Cement Concrete Of Size 0.60 × 0.60 × 0.30 M In Ratio 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded 40 Mm Brick Ballast) As Per Approved Drawing, Including Backfilling, Proper Ramming And Allied Works, Fixing, Tightening And Nozzling Of Stay Wire With Stay Rod And Pole To The Required Tension As Per Respo Drawings/Norms, Including Providing And Fixing Stay Clamp Made Of M.S. Flat Of Size 50 × 6 Mm With Suitable Nuts, Bolts And Loops, And All Grouting Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Earthing Of Supports With M.S. Earth Rod Of Size 20 × 2540 Mm Complete In All Respects, Including Excavation Of Pit, Driving Of M.S. Rod At A Distance Of 3.0 M From The Support And 0.5 M Below Ground Level, And Connection Of Support With Earth Electrode Using Suitable Size G.I. Wire And Earthing Lugs, Including Providing And Fixing Of Proper Size Nuts, Bolts And All Associated Accessories, As Per Respo Drawings/Norms, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Grouting Of Plain Cement Concrete Supports Complete In All Respects With Cement Concrete In Ratio 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded 40 Mm Brick Ballast) In Block Size 450 × 450 Mm Up To 1/6Th Of The Full Length Of Support Below Ground Level, Including Providing 300 Mm Plinth Above Ground Level With Cement Concrete In Ratio 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Grit) With Proper Mufting As Per Approved Drawing, Including Backfilling, Proper Ramming And Providing All Required Grouting Materials, Labour, Tools & Plants For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of 6 Inch Dia Class-B G.I. Pipe Over 33 Kv 3 × 300 Sq.Mm Xlpe Cable And Lt Xlpe Cable Before Mounting On Double Pole Structure, Complete In All Respects, Including Providing And Fixing Of Suitable Clamps, Sealing Of Top And Bottom Ends Of Pipe, Burying One End Of Pipe Approximately 500 Mm Below Ground Level, Mounting And Clamping Of Cable On Double Pole Structure, And Making Connection With Overhead Line At Both Ends, Including All Labour, Tools & Plants And Associated Materials Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Making And Filling Of 33 Kv Xlpe Cable Jointing Kit Suitable For 3 × 300 Sq.Mm Cable Complete In All Respects, Including Proper Plumbing And Taping Of Xlpe Cable, Providing, Fixing And Crimping Of Suitable Size Approved Quality Lugs, Including Cost Of Lugs, Tapes And All Jointing Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Per Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Making And Filling Of 11 Kv Xlpe Cable Jointing Kit Suitable For 3 × 120 Sq.Mm Cable Complete In All Respects, Including Proper Plumbing And Taping Of Xlpe Cable, Providing, Fixing And Crimping Of Suitable Size Approved Quality Lugs, Including Cost Of Lugs, Tapes And All Jointing Materials, Labour, Tools & Plants Required For Satisfactory Completion Of Work As Per Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Providing, Fabricating And Fixing Of Side Bracket Made Of M.S. Channel And M.S. Angle Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Erection Of 33 Kv V-Type Cross Arm Complete In All Respects, Including Providing And Fixing Of Holding Clamps, Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Trenchless Laying Of 200 Mm O/D Pe-80, Pn-4 Grade Uv Stabilized Hdpe Pipe Conforming To Relevant Is Specifications In Standard 6 Mtr Length For Laying Of Underground Cable, Complete In All Respects As Per Respo Norms, Including Cost Of Hdpe Pipe, Jointing, Handling, Labour, Tools & Plants And All Associated Works Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying Of 11 Kv Xlpe Cable Of Size 3 × 125 Sq.Mm Underground Through Hdpe Pipe Complete In All Respects, Including Pulling, Dressing, Alignment And Leaving Spare Cable In Loop Shape At Both Ends As Per Respo Norms, Including All Labour, Tools & Plants And Associated Works Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Laying Of 33 Kv Xlpe Cable Of Size 3 × 300 Sq.Mm Underground Through Hdpe Pipe Complete In All Respects, Including Pulling, Dressing, Alignment And Leaving Spare Cable In Loop Shape At Both Ends As Per Respo Norms, Including All Labour, Tools & Plants And Associated Works Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of Danger Board Complete In All Respects, Including Providing And Fixing Of All Required Accessories Such As Suitable Clamps, Nuts, Bolts And Allied Materials, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of Stone Pad Of Size 300 × 300 × 75 Mm Complete In All Respects, As Per Respo Norms And Approved Drawings, Including Excavation, Dressing, Leveling, Proper Positioning, Packing And Fixing With All Labour, Tools & Plants And Associated Materials Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of F-Clamp Complete In All Respects, Including Suitable Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Of Holding Clamp Complete In All Respects, Including Suitable Nuts, Bolts And All Associated Accessories, As Per Respo Norms And Approved Drawings, Including All Labour, Tools & Plants Required For Satisfactory Completion Of Work As Directed By The Site In-Charge/Engineer-In-Charge. , Providing And Fixing Top Channel Of Approved Make And Required Dimensions Conforming To Respo Norms And Specifications; Work Includes Material Supply, Transport, Unloading, Cutting To Size, Hoisting, Alignment, And Rigidly Securing In Position With Approved Fasteners, Hardware, And Scaffolding At Any Height Or Location, Complete In All Respects As Per The Manufacturers Guidelines And To The Entire Satisfaction And Direction Of The Site In-Charge. , Providing And Fixing G.I. Barbed Wire Fencing Of Approved Make, Weight, And Gauge Conforming Strictly To Respo Norms And Standard Technical Specifications; Work Includes Supplying, Transporting, And Unrolling Required Lines Of Horizontal And Diagonal Strands, Tightly Stretching, Aligning, And Securely Fixing To Concrete/Steel/Stone Posts Using Approved G.I. Staples, Binding Wire, Or Fasteners, Including All Leads, Lifts, Necessary Scaffolding, Tools, Tackles, And Labor Required To Complete The Installation In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing And Fixing M.S. / G.I. / High-Tensile Nut And Bolt Assemblies Of Approved Make, Grade, And Required Diameters/Lengths Conforming Strictly To Respo Norms And Standard Technical Specifications; Work Includes Supply, Transport, Positioning, Aligning, And Rigidly Tightening To The Specified Torque Using Appropriate Washers (Plain/Spring) And Tools, Including All Necessary Scaffolding, Labor, Leads, And Lifts Required To Complete The Fastening Work In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Erection Of Structural Steel Bracing Sets Of Size 4.3 M X 4.3 M Fabricated From M.S. Angle Sections Of Size 65 Mm X 65 Mm X 6 Mm, Conforming Strictly To Respo Norms And Technical Specifications; Work Includes Hoisting, Lifting, Proper Positioning, Leveling, Aligning, And Rigidly Securing The Assembly Using Approved Holding Clamps, Structural Nuts, Bolts, And Washers Of Required Sizes, Including The Cost Of All Fastening Hardware, Necessary Tools, Tackles, Scaffolding, Staging, Leads, Lifts, And Labor Required To Complete The Installation In All Respects As Per Standard Engineering Practices And Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , 33 Kv Protection Of Sub-Station In B.Plan 2026-27 Scheme, In The Jurisdiction Of Edd-Garh Under Edc Hapur.(01 No Work) detail project report 39 , Carriage Of 33 Kv Vcb From Electricity Store Center Hapur/J,E. Store To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road, As Per Direction Of Site Lncharge. , Carriage Of 33 Kv Ct Out Door From Electricity Store Center Hapur/J,E. Store To Site Of Work With Loading And Unloading At Both Ends On Kachha Packka Road, As Per Direction Of Site Lncharge. , 33 Kv Installation Of Vcb , 33 Kv Installation Of Ct Outdoor , Providing & Making And Fixing Of Side Breckit By Ms. Channel, Ms Angle By Providing Holding Clamp & Nut Bolt As Per Respo Norms, And As Per Direction Of Site Incharge. , Erecetion Of 11 Kv Disc Insulator With Fitting By Providing Holding Clamp & Nut Bolt As Per Respo Norms, And As Per Direction Of Site Incharge. , Providing And Fixing Of Copper Control Cable Size 2X2.25 Sq.Mm. , As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing, Installing, Testing, And Commissioning Of Maintenance-Free Water Level Chemical Earthing System Conforming To Is:3043 Specifications For Distribution Transformers And Substations; Scope Includes Boring An Earth Pit Of Required Depth, Inserting A Heavy-Duty Copper-Bonded Steel Electrode Or Gi Pipe (Minimum 3-Meter Length), Backfilling The Pit With Eco-Friendly Moisture-Retaining Earth Enhancement Chemical Compound, Providing A Dedicated Funnel Arrangement With A Perforated Gi Watering Pipe Running To The Root Of The Electrode For Manual Moisture Replenishment, Constructing A Rigid Brick Masonry/Pre-Cast Concrete Inspection Chamber With A Heavy-Duty Removable Cover Plate At Ground Level, And Establishing Secure Structural Connections To The Equipment Earth Grid Using Proper Size Gi/Copper Strips, Inclusive Of All Excavation In Any Soil Strata, Backfilling, Ramming, Hardware, Labor, Tools, Tackles, And Transportation, Complete In All Respects As Per The Directions Of The Engineer-In-Charge. , Providing And Fixing Of Ms Channel As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing And Fixing Of Ms Angle As Per Respo/Norms And As Per Direction Of Site Incharge. , Jumpering And Line Energisation Work Properly As Per Respo/Norms And As Per Direction Of Site Incharge. , 33 Kv Vcb In B.Plan 2026-27 Scheme, In The Jurisdiction Of Edd-Garh Under Edc Hapur. ( 07 No Work) detail project report 20,21,22,23,24,25,26 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , 33 Kv Ct Outdoor Ctr 200/100/1 , Control Pannel 33 Kv Double T/F , 33 Kv Outdoor Type Vcb , Providing, Fabricating, And Fixing M.S. Side Brackets Of Required Design And Dimensions, Utilizing Approved M.S. Channel And M.S. Angle Sections, Conforming Strictly To Respo Norms And Standard Technical Specifications; Scope Of Work Includes Material Supply, Cutting, Welding, Drilling, Rust-Preventive Primer Coating, Hoisting, Proper Alignment, And Rigidly Securing The Brackets In Position Using Appropriate Holding Clamps, Nuts, Bolts, And Washers, Inclusive Of All Necessary Staging, Scaffolding, Tools, Tackles, Labor, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing, Laying, Testing, And Commissioning Of Pvc/Xlpe Insulated, Pvc Sheathed 2 Core X 2.25 Sq.Mm. Copper Control Cable (Armored/Unarmored) Of Approved Make And Grade, Conforming Strictly To Respo Norms And Relevant Is Specifications; Work Includes Supply, Transportation, Storage, Unrolling, Straightening, And Laying Of Cable Through Existing Pipes, Conduits, Cable Trays, Or Trenches, Including Dressing, Clamping, Structural Clipping, Proper Tag Identification, End-Termination Using Required Size Copper Lugs, Glands, Glands-Earthing, And Testing (Insulation Resistance And Continuity Tests), Inclusive Of All Labor, Tools, Tackles, Scaffolding, Leads, And Lifts, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing, Laying, Testing, And Commissioning Of Pvc/Xlpe Insulated, Pvc Sheathed 4 Core X 2.25 Sq.Mm. Copper Control Cable (Armored/Unarmored) Of Approved Make And Grade, Conforming Strictly To Respo Norms And Relevant Engineering Specifications; Work Includes Supply, Transportation, Storage, Unrolling, Straightening, And Laying Of Cable Through Existing Pipes, Conduits, Cable Trays, Or Trenches, Including Systematic Dressing, Clamping, Structural Clipping, Proper Tag Identification, End-Termination Using Required Size Copper Lugs, Glands, Glands-Earthing, And Necessary Testing (Insulation Resistance And Continuity Tests), Inclusive Of All Labor, Tools, Tackles, Scaffolding, Staging, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Construction Of Vacuum Circuit Breaker (Vcb) Plinth Of Size 2.0 M X 2.0 M X 1.5 M Suitable For A 250 Kva Transformer/System, Executed Strictly As Per Approved Structural Drawings And Respo Norms; Work Includes Excavation, Providing And Laying Cement Concrete (Cc) 1:4:8 (1 Cement : 4 Sand : 8 Graded Brick Ballast) In Foundation, Constructing Side Walls Using 1St Class Brickwork In Cement Mortar 1:4 (1 Cement : 4 Fine Sand), Applying 12 Mm Thick Cement Plaster 1:4 (1 Cement : 4 Fine Sand) On Exposed Surfaces, Backfilling Inside The Plinth With Brick Ballast Including Systematic Watering And Heavy Ramming/Compaction, And Casting A Finished Reinforced Cement Concrete (Rcc) Top Slab In 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Including Necessary Reinforcement Steel, Shuttering, Centering, And Curing; Rate Shall Be Fully Inclusive Of All Material Supply, Transport, Machinery, Scaffolding, Labor, Leads, And Lifts, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing, Laying, Testing, And Commissioning Of Pvc/Xlpe Insulated, Pvc Sheathed 6 Core X 2.25 Sq.Mm. Copper Control Cable (Armored/Unarmored) Of Approved Make And Grade, Conforming Strictly To Respo Norms And Relevant Engineering Specifications; Work Includes Supply, Transportation, Storage, Unrolling, Straightening, And Systematic Laying Of Cable Through Existing Pipes, Conduits, Cable Trays, Or Trenches, Including Dressing, Clamping, Structural Clipping, Proper Tag Identification, End-Termination Using Required Size Copper Lugs, Compression Glands, Glands-Earthing, And Mandatory Pre-Commissioning Testing (Insulation Resistance And Continuity Tests), Inclusive Of All Labor, Tools, Tackles, Scaffolding, Staging, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Propviding And Intallation All Requrment For Earthing Of Neutral By Boring And Lowering Of G.I. Pipe Size 32 Mm Dia... Into The Ground Up To Water Level 80 Fit. With The Lower End Of Solid Copper Cone Approx. 225Mm Long And 750 Gm. In Weight Shall Be Provided And In Pipe As Well As Bringing Out A Continuous Copper Wire 6 Swg From The Cone Up To The Ground Surface Where It Will Bc Bolted To The Nf.S. Earth Strip For Tif Neutral Connection, The Earth Strip *Vill Be Welded To The G.L. Pipe And Neutral Earthing Support, As Per Direction Of Site Incharge. , Installation Of 100 Kva Additonal Tf In B.Plan 2026-27 Scheme At Various Site Of Edd-Garh, Under Edc Hapur (No. Of Work 5) 121,122,123,124,128 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Disc Fitting 45 Kn , Acsr Weasel Conductor , Earth Rod , A.B Cable L.T (3X120+1X95+1X16) Sq Mm , D.O Fuse Set , 11 Kv Tpmo Switch , 11 Kv completion Poly. Pin Insulator , Plain Cement Concrete Pole 8.5 Mtr. , Plain Cement Concrete Pole 11 Mtr. , Stay Set , Stay Wire , 11 Kv completion Poly. Disc Insulator 45 Kn , Lt Alu. Xlpe Cable 3.5X150 Sq. Mm , Gi Wire 4Mm/8Swg , Gi X-Arm Angle , 100 Kva Transformer , Lt Xlpe Cable 3.5X150 Sq.Mm. , Erection And Fixing Of The Following Materials Complete In All Respects, Including All Required T&P, Labour, Handling, Lifting, Fastening And Allied Works For Proper Installation As Per Departmental Specifications, Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Disc Fitting 45 Kn , 11 Kv completion Poly. Pin Insulator , Stay Wire , 11 Kv completion Poly. Disc Insulator 45 Kn , Lt Alu. Xlpe Cable 3.5X150 Sq. Mm , Gi Wire 4Mm/8Swg , Gi X-Arm Angle , Lt Xlpe Cable 3.5X150 Sq.Mm. , Erection Of Double Pole (Dp) Structure Utilizing 8.5-Meter Long Plain Cement Concrete Poles, Complete With All Necessary Structural Accessories And Conforming Strictly To Approved Respo Drawings And Norms; Work Includes Excavation, Pole Erection, Alignment, Backfilling, And Fabrication, Supply, And Fixing Of M.S. Top And Dropper Channels, M.S. Tif Angles, And E-Brackets; Installation Of 11 Kv Pin Insulators With Pins And Disc Insulators With Appropriate Hardware/Disc Fittings; Providing And Fixing Structural Stays, Bracings, And Assemblies Fabricated From M.S. Flat Of Size 50 Mm X 6 Mm, Secured Tightly With Proper Size Nuts, Bolts, And Washers; Execution Of Complete Standard Jumpering, Binding, And Pg Clamping Work Using Appropriate Conductors/Accessories To Ensure Electrical Continuity; Rate Shall Be Fully Inclusive Of All Structural Steel, Hardware, Insulation Materials, Machinery, Tools, Tackles, Scaffolding, Labor, Leads, And Lifts At Any Height, Complete In All Respects As Per Standard Engineering Practices Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Erection Of Double Pole (Dp) Structure Utilizing 11-Meter Long Plain Cement Concrete Poles, Complete With All Structural Accessories And Conforming Strictly To Approved Respo Drawings And Norms; Work Includes Excavation, Pole Erection, Leveling, Alignment, And Backfilling; Fabrication, Supply, And Fixing Of M.S. Top And Dropper Channels, M.S. Tf Angles, And E-Brackets; Installation Of 11 Kv Pin Insulators With Pins And Disc Insulators With Appropriate Hardware/Disc Fittings; Providing And Fixing Structural Bracings, Ties, And Support Assemblies Fabricated From M.S. Flat Of Size 50 Mm X 6 Mm, Secured Tightly With Proper Size Nuts, Bolts, And Washers; Execution Of Complete Standard Jumpering, Binding, And Pg Clamping Work Using Appropriate Conductors To Ensure Reliable Electrical Continuity; Rate Shall Be Fully Inclusive Of All Structural Steel Fabrication, Hardware, Insulation Components, Handling Machinery, Tools, Tackles, Scaffolding, Labor, Leads, And Lifts At Any Height, Complete In All Respects As Per Standard Electrical Engineering Practices Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing And Laying Stone Pad Base Blocks Of Size 300 Mm X 300 Mm X 75 Mm Of Approved Quality And Strength, Conforming Strictly To Respo Drawings And Norms; Work Includes Supply, Transportation, Storage, Necessary Excavation Or Surface Preparation, Leveling, And Dressing Of Soil, Proper Positioning, Rammed Leveling, And Alignment Of The Stone Pads Beneath Poles, Structures, Or Stays To Act As A Solid Bearing Foundation, Including The Cost Of All Materials, Machinery, Tools, Tackles, Handling Labor, Leads, And Lifts At Any Location, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing And Fixing Heavy-Duty M.S. Holding Clamps Fabricated To Required Profiles And Dimensions, Complete With Matching Nut, Bolt, And Washer Assemblies Of Approved Make And Size, Conforming Strictly To Respo Drawings And Norms; Work Includes Material Supply, Transport, Proper Positioning Around Poles, Structures, Or Machinery, Alignment, And Rigid Fastening/Tightening To Specified Torque, Inclusive Of All Anti-Corrosive Primer/Paint Coatings, Necessary Tools, Tackles, Scaffolding, Labor, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing And Fixing Heavy-Duty M.S. Clamps Fabricated To Required Design, Shape, And Dimensions, Complete With Appropriate Size Nut, Bolt, And Washer Assemblies Of Approved Make, Conforming Strictly To Respo Drawings And Norms; Work Includes Material Supply, Transportation, Precise Positioning, Alignment, And Rigid Tightening Around Poles, Structural Members, Or Equipment, Inclusive Of Rust-Preventive Primer And Paint Coatings, All Necessary Tools, Tackles, Scaffolding, Staging, Labor, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Safe Handling, Lifting, Positioning, And Installation Of A 100 Kva Distribution Transformer Onto An Existing Lt Sub-Station Double Pole Structure Or Concrete Plinth, Utilizing An Appropriate Capacity Crane, Mechanical Hoists, Or Manual Labor With All Safety Equipment; Work Includes Proper Alignment, Leveling, Structural Securing, And Providing And Crimping Appropriate Sizes Of Heavy-Duty Aluminium Long Barrel Lugs For All Ht (High Tension) And Lt (Low Tension) Terminal Connections To Ensure Low-Resistance Termination, Inclusive Of All Handling Machinery, Rigging Tools, Safety Tackles, Scaffolding, Specialized Labor, Leads, And Lifts At Any Height, Executed Complete In All Respects As Per Standard Electrical Engineering Practices And Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing, Laying, Stringing, Testing, And Commissioning Of Xlpe Insulated Lt Aerial Bunched Cable (Abc) Of Size 3X120 + 1X95 + 1X16 Sq.Mm. (Comprising Three Phase Conductors, One Insulated Messenger Wire, And One Street Light Conductor) Of Approved Make, Conforming Strictly To Respo Norms And Relevant Standard Specifications; Work Includes Unrolling, Straightening, Hoisting, And Tensioning Of The Cable Along Poles/Structures Using Appropriate Sagging Equipment, Providing And Fixing Necessary Hardware Including Suspension Clamps, Dead-End/Anchoring Clamps, I-Hooks, Pole Brackets, Stainless Steel Strapping With Buckles, And Insulation Piercing Connectors (Ipcs) For Jointing Or Tapping; Scope Covers Proper Dressing, Securing, And Mid-Span Clamping To Maintain Standard Clearances, Inclusive Of All Machinery, Winches, Pulling Tackles, Scaffolding, Safety Gear, Labor, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Grouting & Fixing Of Stay Rods (20X1800)Mm Including All Work O Excavation, Cement Concrete In Size (0.60X0.60Xo.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, As Per Direction Of Site Incharge. , Earthing Of Supports With Ms Earth Rod Of (20X2500) Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs As Per Respo Drawing/Norms By Providing Proper Size Nuts & Bolts, As Per Direction Of Site Incharge. , Grouting Of St/Pcc Supports In cement concrete 1:4:8 (Cement, Sand & 40Mm Brick Ballst) Grouting Will Be Done In The Block Of Size (450X450)Mm Xl/6Th O Full Length Of The Support, Up To Ground Level, 300Mm Plinth Above The Ground Level With cement concrete 1:3:6 (Cement, Core Sand And Stone Grit) With Mufting As Per Drawing, Work Includes Back Filling & Proper Ramming By Providing All Required Grouting Materials, As Per Direction Of Site Incharge , Wrapping Of Barbed Wire On 11Kv St/Pcc Poles As Anti-Climbing Device For A Length Of 0.9Mtrs. Wire Pitch/Gap 13Mm And Fixing Upper And Lower End Keeping Lower End At A Height Of 2.75 Mtr From The Ground Complete, Including Providing & Fixing Of Lower End & Upper End Clamps Made Of M.S. Flat 40X5mm Complete With Nuts & Bolts And All Other Required Material And T&P., As Per Direction Of Site Inchargc. , Laying , Stringing And Final Sagging Of Acsr Weasel Conductor, As Per Respo[Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv Fuse/Do Fuse Set Set On Plain Cement Concrete Pole, By Providing All Required Fixing Materials As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Danger Board, Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Lt Fuse Set Protection Unit For 100 Kva Tf With Smc Box Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv Tpmo Set On Plain Cement Concrete Pole, By Providing All Required Fixing Materials As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Ms Angle & Ms Channel All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Ms Channel , Ms Angle , Jumpering And Line Energisation Work Properly As Per Respo Norms And As Per Direction Of Site Incharge. , Installation Of 250 Kva Additonal Tf In B.Plan 2026-27 Scheme At Various Site Of Edd-Garh, Under Edc Hapur 117, 118, 119,120, 125, 126, 127 , Carriage Of Departmental Materials From Electricity Store Centre At Hapur / J.E. Store To The Site Of Work, Including Loading And Unloading At Both Ends. The Work Shall Be Executed Over Kachha And Pakka Roads As Per The Directions Of The Site In-Charge. The Scope Includes Arrangement Of Suitable Transport, Labour For Loading/Unloading, And All Necessary Tools & Plants (T&P). The Lead Distance Shall Be Up To 0-50 Km, Covering Stores Located At Hapur / Ghaziabad / Bulandshahr. , Disc Fitting 45 Kn , Acsr Weasel Conductor , Earth Rod , A.B Cable L.T (3X120+1X95+1X16) Sq Mm , D.O Fuse Set , 11 Kv Tpmo Switch , 250 Kva 11/0.4 Kv Transformer New , 11 Kv completion Poly. Pin Insulator , Plain Cement Concrete Pole 8.5 Mtr. , Plain Cement Concrete Pole 11 Mtr. , Stay Set , 11 Kv completion Poly. Disc Insulator 45 Kn , Lt Alu. Xlpe Cable 3.5X400 Sq. Mm , Erection And Fixing Of The Following Materials Complete In All Respects, Including All Required T&P, Labour, Handling, Lifting, Fastening And Allied Works For Proper Installation As Per Departmental Specifications, Respo Norms And Directions Of The Site In-Charge/Engineer-In-Charge. , Disc Fitting 45 Kn , 11 Kv completion Poly. Pin Insulator , 11 Kv completion Poly. Disc Insulator 45 Kn , Erection Of Double Pole Structure With All Accessories On Plain Cement Concrete Pole 8.5 Mtr. Long, Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. Tif Angle, E-Bracket, 11 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing Norms By Providing All Made O M.S. Flat Of Size 50X6 Mm With Proper Size Nuts And Bolts, And Jumpering Etc Work, As Per Direction Of Site Incharge. , Erection Of Double Pole Structure With All Accessories On Plain Cement Concrete Pole 11 Mtr. Long, Fabrication And Fixing Of M.S. Top & Dropper Channel, M.S. Tif Angle, E-Bracket, 11 Kv Pin Insulator With Pin, Disc Insulator With Disc Fitting Etc., As Per Respo Drawing Norms By Providing All Made O M.S. Flat Of Size 50X6 Mm With Proper Size Nuts And Bolts, And Jumpering Etc Work, As Per Direction Of Site Incharge. , Safely Installation Of 250 Kva Transformer With The Help Of Crane/Manual Labour At Lt Sub-Station Double Pole/Plinth, As Per Direction Of Site Incharge. , Laying Of Lt Alu. Xlpe Cable Al. 3.5X400 Sqmm By Porviding Al Lug And Panching With Cremping Tool Complection Work Properly, As Per Respo/Norms And As Per Direction Of Site Incharge. , Laying , Stringing And Final Sagging Of Acsr Weasel Conductor, As Per Respo[Drawing Norms And As Per Direction Of Site Incharge. , Laying Of Lt Abc 3X120+1X95+1X16 Sqmm By Providing Suspension Clamp Dead End Clamp, I-Hook Etc And Completion Work Properly, As Per Respo Norms, And As Per Direction Of Site Incharge. , Grouting & Fixing Of Stay Rods (20X1800)Mm Including All Work O Excavation, Cement Concrete In Size (0.60X0.60Xo.30)M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast As Per Drg. Including Back Filling, Proper Ramming Etc And Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing As Per Respo Drawing Norms By Providing All Grouting Material And Stay Clamp Made Of M.S. Flat Of Size 50X6mm With Proper Size Bolts & Nuts & Loops, As Per Direction Of Site Incharge. , Earthing Of Supports With Ms Earth Rod Of (20X2500) Mm Long Including Excavation Of Pit And Driving M.S. Rod 3.0 M Apart From Support And 0.5M Below The Ground Level And Connection Below The Earth Electrodes With The Help Of G.I. Wire & Earthing Lugs As Per Respo Drawing/Norms By Providing Proper Size Nuts & Bolts, As Per Direction Of Site Incharge. , Grouting Of St/Pcc Supports In cement concrete 1:4:8 (Cement, Sand & 40Mm Brick Ballst) Grouting Will Be Done In The Block Of Size (450X450)Mm Xl/6Th O Full Length Of The Support, Up To Ground Level, 300Mm Plinth Above The Ground Level With cement concrete 1:3:6 (Cement, Core Sand And Stone Grit) With Mufting As Per Drawing, Work Includes Back Filling & Proper Ramming By Providing All Required Grouting Materials, As Per Direction Of Site Incharge , Construction Of Tf Plinth Suitable For 250Kva (Size Of 2X2x 1.5 Mt.) As Per Drawing, cement concrete Work In Foundation In Ratio 1:4:8 (Cement, Sand & Brick Ballast). 1St Class Brick Work In Side Walls cement concrete Ratio Of 1:4 (Cement & Fine Sand). 12Mm Thick Plaster In Ratio 1:4 (Cement & Fine Sand). The Reinforced Cement Concrete Work On Top Of Plinth In Ratio 1:2:4 Are Duly Filling Of Brick Ballast Inside The Plinth & Ramming The Same, Including Cost Of All Material & Labour, As Per Direction O Site Incharge. , Construction Of Safety Fencing (Ms) For Transformer 11/0.4 Kv Sub Station, With Supply Of Material Required For Ms Fencing (50X50x3 Mm) M.S. Wire Mesh Construction Utilizing Vertical Post Duly Grouted/Fitted In Ground/On Floor. Horizontal Anglen-Iron To Be Fitted On Vertical Posts. Pickets (I Required) Fitted To Rail And Gate To Facilitate Entry And Exit. The Vertical Posts/Horizontal Post Shall Be Made Of M.S. Angle 75X75x6mm. Such Post Shall Be Kept Preferably At Distance Of 800-1000 Mm. And Shall Be Grounded With cement concrete Ratio 1:4:8. The Length Of Vertical Post Shall Be Sufficient To Take Care Of Fencing As Requirement At Site, And As Per Direction Of Site Incharge. , Providing & Fixing Of Danger Board, Including Fixing Of All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv Fuse/Do Fuse Set Set On Plain Cement Concrete Pole, By Providing All Required Fixing Materials As Per Respo/Norms And As Per Direction Of Site Incharge. , Erection & Fixing Of 11Kv Tpmo Set On Plain Cement Concrete Pole, By Providing All Required Fixing Materials As Per Respo/Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Stone Pad 300X300x75 Mm As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Holding Clamp With Nut & Bolt As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing & Fixing Of Alu. Lug 240 Sq.Mm.(Ls) Off Size As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing, Installing, Testing, And Commissioning Of Heavy-Duty Tail-Less Fuse Units (Lt Distribution/Bushing Bars) Of Approved Make, Rating, And Specifications Conforming Strictly To Respo Norms And Standard Electrical Designs; Work Includes Material Supply, Hoisting, Proper Alignment, Mounting Onto The Distribution Transformer Lt Bushings Or Dp Structure Steelwork, Making Solid, Low-Resistance Direct Connections, And Providing All Necessary Copper/Aluminium Links, Hardware, Nuts, Bolts, And Washers, Inclusive Of All Safety Gear, Specialized Labor, Tools, Tackles, Leads, And Lifts At Any Height, Complete In All Respects Under The Strict Direction And Entire Satisfaction Of The Site In-Charge. , Providing & Fixing Of Ms Angle & Ms Channel All Accessories By Providing All Required Materials (Like Suitable Nuts & Bolts Etc.) As Per Respo/Drawing Norms And As Per Direction Of Site Incharge. , Providing, Installing, Testing, And Commissioning Of Maintenance-Free Chemical Earthing System Of Approved Make And Design, Conforming Strictly To Respo Norms, Is 3043, And Ieee 80 Standards; Work Includes Augering/Boring An Earth Pit Of Required Diameter And Depth, Supplying And Lowering A High-Conductivity Copper-Bonded Steel / G.I. Earth Electrode Of Specified Length And Diameter, Completely Backfilling The Surrounding Void With Moisture-Retaining, Non-Corrosive Earth Enhancement Chemical Compound (Bentonite/Carbon Based) Mixed With Water As Per Manufacturer Guidelines, Constructing A Brick Masonry / Pre-Cast Concrete Inspection Chamber With A Heavy-Duty Ci/Concrete Cover Plate On Top, Providing An Integrated Copper/G.I. Terminal Busbar With Required Hardware For Down-Conductor Connectivity, And Conducting Final Earth Resistance Testing To Ensure Values Remain Well Within Permissible Electrical Limits, Inclusive Of All Excavation, Materials, Labor, Tools, And Tackles, Complete Under The Direction And Entire Satisfaction Of The Site In-Charge. , Propviding And Intallation All Requrment For Earthing Of Neutral By Boring And Lowering Of G.I. Pipe Size 32 Mm Dia... Into The Ground Up To Water Level 80 Fit. With The Lower End Of Solid Copper Cone Approx. 225Mm Long And 750 Gm. In Weight Shall Be Provided And In Pipe As Well As Bringing Out A Continuous Copper Wire 6 Swg From The Cone Up To The Ground Surface Where It Will Bc Bolted To The Nf.S. Earth Strip For Tif Neutral Connection, The Earth Strip *Vill Be Welded To The G.L. Pipe And Neutral Earthing Support, As Per Direction Of Site Incharge. , Jumpering And Line Energisation Work Properly As Per Respo Norms And As Per Direction Of Site Incharge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
39.
Housing Urban and Rular Development #11311754 Technical Bid
Tender for 1. Sculpture - MahobaS Betel Leaf - Technical Specification Desiging, Providing, Fabricating, And Installing 10 Ft High (7 Ft Sculpture + 3 Ft Plinth) Frp Sculpture, Executed In Premium-Grade Uv-Stabilized Frp Laminates Minimum 8 Mm Thick, Manufactured Using Chopped Strand Mat (Csm) 450 Gsm And Woven Roving 600 Gsm With Iso-Grade Resin System, Gelcoat Finish And Polymer Hardener. Frp To Be Formed Over A Fabricated Ms Structural Armature Using Ms Square/Round Pipe Section (Minimum 50×50×2.5 Mm Thick), Including Full Welding, Grinding, Stress-Relief, And Two Coats Of Zinc-Rich Epoxy Primer Followed By Polyurethane (Pu) Topcoat On Metal Elements. Surface Finishing To Include Mirror-Finish Inlays Fixed With Industrial-Grade Adhesive As Per Approved Motif Layout And Embedded Bundelkhandi Folk Motifs Engraved Or Cast Within Frp Layer. Plinth To Be Constructed In M-20 Grade Reinforced Cement Concrete With Reinforcement Confirming To Is:456, Shuttering With Waterproof Ply, Finishing, And Integrated Chemical Anchor Bolts (Hilti/Equivalent) For Anchoring Ms Frame To Rcc. Plinth Outer Surface To Be Clad In Polished Red Sandstone 20-25 Mm Thick, Machine-Cut, Fixed Using Stainless Steel Cramps/Clamps (Grade 304) And Polymer-Modified Adhesive With Pointing In Pigment-Matched Epoxy Grout. Brass Nameplate (8-10 Mm Thick) With Deep-Engraved Lettering To Be Installed With Countersunk Ss Screws. Electrical Work Includes Rgb Uplighters (2 Nos. - Ip67, Ik08) With In-Built Charge Controller, Panel Mounting Brackets, Concealed Wiring With Uv-Resistant Cable, Junction Boxes, And Testing. Rgb Lighting System: Providing And Laying Programmable Rgb Led Linear Strip/Flood Lighting, Ip65-Rated, High-Power 5050/3528/2835 Chipset, With Aluminum Channel Fixing, Silicone Encapsulation, 12V/24V Driver, Dmx-Compatible Controller, Power Supply Control Board, Weatherproof Junction Box, Flexible Conduits, Cable Routing Through Gi/Hdpe Conduit (Minimum 25 Mm Dia.), Including Termination, Tagging, Ferrule, Testing, Commissioning, And Integration With Existing Supply. Complete Including All Labour, Tools, Plants, Scaffolding, Anti-Uv Coating, Joint Sealing, Curing, Protection, And Finishing As Per Approved Drawings And The Direction Of Engineer-In-Charge. , 2. Sculpture - The Elder Craftsman Desiging, Fabrication Of 11 Ft High Life-Size Artisan Sculpture, Executed In Frp 6-8 Mm Thickness, Produced Using Hand Lay-Up Process, Reinforced With Csm 450 Gsm And Woven Roving 600 Gsm, Surface Gelcoat Resistant To Uv & Atmospheric Conditions. Internal Ms Support Frame Fabricated With Is 806/Is 1161 Compliant Steel Tubes, Welded As Per Is: 816, Ground Smooth, Inspected By Dye-Penetration Testing At Joints, And Coated With Zinc-Rich Epoxy Primer And Pu Topcoat. Sculpted Tools (Hammer, Chisel, Stone Block) To Be Integral Frp Components Reinforced With Ms Inserts Where Necessary. Exterior Finishing In Bronze Patina Multi-Layer System Including Base Coat, Shading Coat, Glaze, And Weather-Protective Clear Pu. Base: 3.5 Ft Reinforced Cement Concrete Pedestal (M-20), Steel Reinforcement Fe-500 Grade, Chemical Anchor Fixing System, Clad With Premium-Grade Granite Slabs (20-25 Mm Thick), Polished To 800-1000 Grit, Chamfered Edges, Fixed With Stainless Steel Clamps And Polymer-Based Adhesive. Rgb Lighting System: Supply And Installation Of Rgb Led Linear Lights/Spot Fixtures, Ip65/Ip67-Rated, With Aluminum Extrusion Channels, Pvc/Silicone Sealing, Dmx Controller, Waterproof Driver, 16-18 Gauge Copper Wires, Gi Conduits, Mcb Protection, Synchronization Of Lighting Sequences, Testing & Commissioning. Includes Earth Connection As Per Is:3043, Foundation Excavation/Backfilling, Hoisting, Alignment Using Spirit Level And Temporary Supports, Protective Anti-Uv Coat, Finishing Complete , Sculpture - Egksck Dk Lw;Z Eafnj (Sun Temple Of Mahoba) Desiging, Providing And Erecting 10 Ft High Frp Sculpture (10 Mm Thick) Fabricated Using Dual-Layer Woven Roving 600 Gsm And Csm 450 Gsm With Isophthalic Grade Resin System, Designed With Embedded Transparent/Colored Acrylic Panels (6-8 Mm Cast Acrylic) Supported Within Frp Recesses. The Sculpture Includes Internal Led Illumination Cavity With Access Hatch. Internal Ms Structure Designed As Per Structural EngineerS Certification For Wind Loadings Up To 180 Km/H. Surface Finishing To Be Golden Metallic Enamel, Multi-Coat System With Primer, Metallic Flakes Coat, Final Pu Topcoat. Base: 4 Ft Reinforced Cement Concrete Pedestal, Reinforcement Detailing As Per Structural Drawing, Fully Clad With Jaisalmer Yellow Stone, Machine-Cut And Mirror-Polished, Fixed With Ss Cramps. Electrical Works Include Ip-Rated Internal Led Modules, Drivers, Controller, Cable Trays Inside Sculpture, And Maintenance Access Door. Rgb Lighting System: Providing And Installing Rgb Led Accent Lighting, Ip65-Rated, With Programmable Controller, Dmx Interface Module, Gi Conduit, Copper Wiring, Junction Boxes, Mcb Protection, Earth Continuity Conductor, And Full Testing And Commissioning. Complete Including Foundation, Anchoring, Grouting, Cable Management, And Surface Finishing As Per Drawings. , 4. Sculpture - Fort Of Mangalgarh Desiging, Fabrication And Installation Of 10 Ft High Sculpture Made Of Treated Steel Scrap, Utilizing Ms Plates, Rods, Flats, Angles, Bars Of Select Thickness (4 Mm-10 Mm), Cleaned By Sandblasting (Sa 2.5 Standard), Welded Using Is-Approved Welding Electrodes, Full Penetration Welds Where Required, Visually Inspected And Tested. Surface To Undergo Rust-Induced Patina Treatment Through Chemical Oxidation, Sealed With Clear Epoxy Topcoat (2-3 Layers). Sculpture Supported On Heavy-Duty Internal Ms Frame Anchored To Reinforced Cement Concrete Plinth (M-20 Grade) Clad With Natural Stone (Random/Ashlar Masonry), Fixed With Ss Clamps. Rgb Lighting System: Providing And Fixing Rgb Led Flood Or Strip Lights, Ip65/67-Rated, On Anti-Corrosion Metal Brackets, Concealed Wiring, Dmx/Ir Controller, Driver Unit, Gi Conduit, Cable Protection, Mccb/Mcb As Required, Tagging, Termination, Testing, And Commissioning. Includes All Corrosion-Treatment Stages, Structural Frame Fabrication, Erection, Foundation Concreting, Anchor Bolt Fixing, Finishing Complete. , 5. Sculpture - Raja Parmal Desiging, Fabrication And Erection Of 12 Ft High Equestrian Statue, In Frp 10 Mm Thickness, Gel-Coated Finish, Multi-Layer Lamination, Sculpted Detailing On Armour, Horse Musculature, Ornaments, Weaponry. Internal Ms Structural Frame Designed With Triangulated Truss Geometry Ensuring Stability Against Wind-Induced Vibrations; Steel Tubes Treated With Sandblasting And Epoxy Primer. Plinth: 4 Ft Reinforced Cement Concrete Base With Fe-500 Reinforcement, Fully Clad With High-Grade Granite Slabs, Fixed With Ss Cramps (Grade 304/316). Engraved Stone Plaque Fixed With Hidden Anchors. Surface Finish: Antique Bronze Metallic Finish With Multi-Layer Pu Protective Coating. Rgb Lighting System: Installation Of Rgb Programmable Spotlight Array, Ip67-Rated, Dmx-Controlled, Drivers, Dimmers, Gi Conduits, Ryb Phase-Balanced Power Distribution, Earthing Per Is:3043, Labeling, Cable Routing, Testing & Commissioning. All Structural Fixing, Grouting, Verticality Adjustment, Surface Cleaning, And Protection Complete. , 6. Sculpture - Alha Desiging, Providing, Fabricating, And Installing 11 Ft High Frp Sculpture (8 Mm Thick), Layer Composition Csm 450 Gsm + Woven Roving 600 Gsm, High-Impact Resin System With Uv Stabilizer. Internal Structural Frame Fabricated Using Ms Pipes (50×50×2.5 Mm Min.), Epoxy Coated, Welded To Base Plate Fixed With Chemical Anchors. Mounted On Circular Reinforced Cement Concrete Plinth (M-20), Clad In Sandstone Slabs With Fine Chiselled Finish. The Base Includes Engraved Verse From Alha-Khand On Brass/Stone Plaque. Surface Finishing To Include Dark Bronze Metallic Paint, Pu Topcoat, Uv-Resistant Sealant. Rgb Lighting System: Providing And Fixing Ip65-Rated Rgb Led Edge-Lighting System Concealed In Plinth Recess, Provided With Dmx Controller, Drivers, Gi Conduit, Wiring, Earthing, And Commissioning. Includes Excavation, Foundation Concreting, Grouting, Anti-Uv Protective Coating, Finishing Complete. ,. Sculpture - Udal Desiging, Fabrication And Installation Of 11 Ft Dynamic Warrior Sculpture, Frp (8 Mm Thickness Minimum), Reinforced With Multi-Layer Frp Lamination, Internal Ms Structural Backbone Designed For Dynamic Cantilever Stresses Using Analysis Inputs. Dual-Tone Bronze-Steel Patina Finish By Multi-Layer Painting System. Mounted On Reinforced Cement Concrete Plinth (M-20), Granite Cladding 20-25 Mm Thick, Stainless Steel Cramps, Polymer Adhesive. Rgb Lighting System: Supply And Installation Of Rgb Led Spotlight/Linear Lighting System, Ip65/Ip67-Rated, Programmable, Including Driver, Controller, Conduits, Control Wiring, Earthing, Load Balancing, Testing, Commissioning. Includes Alignment, Installation, Anchor Bolt Tightening, Surface Finishing, Cleaning Complete In All Respects. , 8. Sculpture - Gorakhgiri Desiging, Providing And Fixing Spiritual Sculpture Depicting Gorakhnath Within An Abstract Hill-Form, Fabricated In Frp 10 Mm Thickness, Reinforced With Ms Skeleton Frame, Stress-Tested, Epoxy-Coated. Stone-Texture Frp Surface Created Using Multi-Layer Texture Coat, Shading Coat, And Final Weatherproof Pu Coat. Mounted On 3.5 Ft Reinforced Cement Concrete Plinth Clad With Sandstone, Fixed With Ss Cramps And Epoxy Adhesive. Brass Nameplate Fixed Flush. Optional Halo-Effect Led Illumination Integrated Within Sculpture With Concealed Access For Maintenance. Rgb Lighting System: Providing And Fixing Rgb Led Backlighting/Edge Lighting, Ip65/Ip67-Rated, Driver-Controlled, Dmx Controller Integration, Gi Conduit, Cable Management, Termination, Testing, Commissioning. Includes Foundation, Anchoring, Hoisting, Structural Inspection, Protective Coatings, Finishing Complete As Per Direction Of Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Uttar Pradesh View Result →
40.
Educational and Research Institute #11309731 AOC
Bids Are invited for Raw Material White Board Marker - Whiteboard Markers Black, Blue, Red And Green 4.43 Mm Bullet Tip Non-Toxic Smooth Writing Easy Wipe , Cleaning Liquid 50Ml - Liquid Cleaning Kit For Laptop For Laptops Computers, Gamingm, Mobiles , Photo Copy Paper A4 - Copier Paper A4 Size 70 Gsm 500 Sheets White Paper, 1 Ream For Laserjet Inkjet Printer Fast Drying Both Side Print Eco Friendly Color , Rj 45 Connector - Rj45 Connector Module Plugs , Mouse Usb Product - Comfort Wired Usb Mouse 3 Button 1000 Dpi Optical Sensor Plug And Play For Windows Mac Black , Keyboard Usb Product - Wired Usb Keyboard Plug Play 105 Button Mouse 1000 Dpi High Precision Advanced Optical Sensor , Cat 6 Cable 305Meter - Colour Gray Connector Gender Male To Male Item Weight 10570 Grams Item Length 305Meter , Stapler 10No Small - Staples Combo Standard Stapler With Quick Loading Mechanism Sturdy Durable For Long Time Use Color May Vary Pack Of 1 , Remote Battery Aaa - Aaa Battery Duracell Devices Clock Toy Remote , Battery Clock Aa - Aa Battery Duracell Devices Clock Toy Remote , Cd - A Compact Disc Cd Is A Digital Optical Disc Data Storage , Dvd - A Compact Disc Dvd Is A Digital Optical Disc Data Storage , Usb-Hub Bus - Ultra Slim Multiport Type C Hub To 1Xusb 3.0 And 3Xusb 2.0 Ports , Vga Cable 1 To 2 - Cable 1 Male Vga To 2 Female Vga Splitter Cable For Laptop, Television, Personal Computer , Curtains - Size 4X6 Silky Cloth , M.S.Flat 50X12mm - Ms Flat Rectangular Ms Flat, For Industrial 50X12mm , M.S.Flat 100X10mm - Ms Flat Rectangular Ms Flat, For Industrial 100X10mm , M.S.Flat 50X8mm - Ms Flat Rectangular Ms Flat, For Industrial 50X8mm , M.S. Electrode 2.5Mm - Welding Rod E6013 2.5 X 350Mm (Mse011) Isi Grade Mild Steel Electrode Rutile Coated Arc Welding Rods For Ac/Dc Easy Strike, Smooth Bead, Low Spatter General Fabrication And Repair , M.S Sheet 3 X 8 X 2.5Mm - Ms Sheet 2.5 Mm Rectangular Mild Sheet For Industrial , M.S Sheet 4 X 8 X 3Mm - Ms Sheet 3 Mm Rectangular Mild Sheet For Industrial , Welding Machine Output Copper Leads 35Mm - Isi Welding Cable 35 Sq.Mm Flexible Isi Certified Copper Welding Cable For Workshop And Fabrication Use , Pvc Gang Box 4X8 Modular - Modular Surface Gang Box, White 4X8 , Pvc Gang Box 4X10 Modular - Modular Surface Gang Box, White 4X10 , Multistandard Copper Wire 4Mm - Pvc Copper Wire 4Mm Pro Fr Electrical Wire, 90 Meter Fire Resistant Single Core Pvc Insulated Pure Copper Wire, Anti Rodent Anti Termite Flexible Wire For Connections Black , Multistandard Copper Wire 4Mm - Pvc Copper Wire 4Mm Pro Fr Electrical Wire, 90 Meter Fire Resistant Single Core Pvc Insulated Pure Copper Wire, Anti Rodent Anti Termite Flexible Wire For Connections Red , Bar Magnet - Enhancing Efficiency And Precision In Manufacturing Processes 4 Inch , Carbon Resitor 01 K - Tolerance 1K Mr Ohm Mf Through Hole Resistors Axial Lead , Diode 1N 4007 - Diode In4007 Passive, Two Terminal Electrical Components That Limit Or Regulate The Flow Of Electric Current In A Circuit , Mcb 63 Tpn With Box - Mcb Single Pole 63 Triple Pole Mcb With Box Isi Marked , Steel Screw 15Mm 100Nos - Screw 15Mm Steel Screw Paster Boards Solid Stainless , Pvc Rawal Plug 3.5Mm - Rawl Plug Heavy Duty Plastic Rawl Plugs Durable Expansion Anchors For Plasterboard, Masonry, Brick And Concrete Wall Fixings For Screws , Wooden Screw 75Mm 100Nos - Screw 75Mm Fixing Wood, Plywood, Paster Boards Solid Stainless , Pvc Cable Clip 6Mm - Pvc White Cable Clip 6Mm , Pvc Cable Clip 10Mm , Pvc Cable Clip 20Mm , 4 Core 2.5Mm Armoured Cable - 4 Core 2.5Mm Armoured Cable Lt Power Cable Insulation Material Xlpe Conductor Material Aluminum Number Of Cores 4 Core Application Power Cable Voltage 1100 V Current Rating 34 To 418 , Pvc Casing Caping 1 Inch 6Ft Length - Pvc Casing N Caping, For Electric Wire Installation 3M , Sand Paper Zero Number - Sanding Paper Emery Paper Sand Paper , Led Bulb 18W - Led Bulb 18W Electric High Glo Led Bulb 18W, B22d Cap, 6500K , Solar Torch - Solar Torch Electric High Glo Led Bulb 18W, B22d Cap, 6500K , Seek Jadhu - Jhadu Seek Jhadu Plastic Wet And Dry Brush (White) , Table Cloth Size 5X3 - Machine Washable Rectangle Tablecover For Office Table , Kachra Bag - Leak Proof And Tear Resistant Trash Bags For Kitchen Home And Commercial Use Dustbin Bags For Dry And Wet Waste With Free Check Duster Cloth -Black , Register 2 Quire - Register 2 Quire, Pages C Ruled Single Line Register For Office Record Keeping , Register 4 Quire - Register 4 Quire, Pages C Ruled Single Line Register For Office Record Keeping , Chalk White - Chalk White A Soft, Porous, Sedimentary Carbonate Rock Primarily Made Of Calcium Carbonate , Duster - Wooden Duster For White Boards, Glass Boards And Chalk Boards , Stepler 24X6 Big - Staples Combo Standard Stapler With Quick Loading Mechanism Sturdy Durable For Long Time Use Color May Vary , Marker Ink 15 Ml - White Board Marker Ink - 15 Ml Suitable For White Board Surface School Stationery Easily Refill Bold Color Smudge Proof Quick Drying , Bill Register - Bill Register 70 Gsm Paper With Hard Binding Cover For Long Durability , Batten Holder 05 - Batten Type, White, Isi Certified, Ideal For Ceiling/Wall Use With Standard , Angle Holder 05 - Angle L Holder Fancy Type 240V White , Pendent Holder 05 - Pendant Bulb Holder For Wall, B22 Batten L Holder For Led/Electric Bulb For Home (White) , Pvc Aluminium Wire 2.5 Mm Single Strand - Aluminium Wire Electric Cable Heavy Duty 2.5Mm 2 Core Aluminium Cable For Electrical Fittings , Kit - Kat Fuse 100A - 100A 415 Volt Ac Porcelain Fuse Units (Kitkat Fuse) , Winding Wire Copper 32 Swg - Enameled Copper Wire - 32 Gauge (0.27 Mm Diameter) - 99.9% Pure Copper Wire - Winding Wire , Winding Wire Copper 35 Swg - Enameled Copper Wire - 35 Gauge (0.27 Mm Diameter) - 99.9% Pure Copper Wire - Winding Wire , Winding Wire Copper 36 Swg - Enameled Copper Wire - 36 Gauge (0.27 Mm Diameter) - 99.9% Pure Copper Wire - Winding Wire , Cotton Winding Tape - Cotton Tape For Winding Insulation And Multipurpose Use , Winding Sleev Umpire 01 No - Fiberglass Insulation Sleeve 1Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 02 No - Fiberglass Insulation Sleeve 2Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 03 No - Fiberglass Insulation Sleeve 3Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 04 No - Fiberglass Insulation Sleeve 4Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Winding Sleev Umpire 05 No - Fiberglass Insulation Sleeve 5Mm Class H 180Degree C Heat Resistant Electrical Insulation Tube Braided Glass Fiber Sleeve For Motor Winding Transformer And Wire Protection , Sand Paper 00 To 01 No - Sandpaper, 9 X 11 Inches, Silicon Carbide, Ultra Fine Grit 60, Foam Backed, Compatible With Sanding Block, Suitable For Metal, Wood, Plastic , Winding Paper Millinex Paper - Insulation Paper Sheet Class F 155Degree C Electrical Insulation Paper Flame Resistant High Dielectric Aramid Sheet For Motor And Transformer , Lock 55Mm - Lock 55Mm Combinations Steel Body Hardened Shackle 8 Brass Levers Made In India Padlock 3 Silver Keys , Coolent - Hybrid Tech Antifreeze Coolant For Bikes Ready To Use Radiator Fluid, Prevents Overheating Corrosion, Long-Lasting Engine Protection , Gardening Pipe 1Inch - Gardening Pipe 1Inch Heavy Duty 3 Layered Braided Pipe 30 Meter Long Water Hose Pipe Pvc Braided Pipe Green Garden Outdoors Pipes With Hose Connector , Saddle Patti - Plastic Saddle Cl 25Mm , Metal Mcb Channel Patti - Mounting Rail 35Mm X 7.5Mm Slotted Galvanized Steel Channel For Electrical Panels, Terminal Blocks, And Mcb Mounting , Pvc Clip 6Mm - Pvc White Cable Clip 6Mm , Pvc Flexible Coper Wire 4Mm - Pvc Flexible Coper Wire 4 Sqmm 90 Meter Copper Wire Hrfr Heat Resistant Flame Retardant Lead-Free Cable Low Smoke Halogen-Free Wire For Home And Industrial Electrical Wiring , Pvc Flexible Coper Wire 1.5Mm - Pvc Flexible Coper Wire 1.5Mm Electrical Wire, 90 Meter Fire Resistant Single Core Pvc Insulated Pure Copper Wire, Anti Rodent Anti Termite Flexible Wire For Connections (Black , Screw 4Inch - Ms Screw 6 X 100 Mm (4 Inch) , Soldering Iron 65Watt - Heavy-Duty 65 Watts Soldering Iron With Pvc Wire And Copper Tip , Upvc Pipe 3X4inch - Upvc Water Pipe Of Size 3X4inch , Upvc Elbow 3X4inch - Upvc Elbow 3X4inch Fittings Elbow 90 Degree 3Inch White , Upvc Tee 3X4inch - Plain Upvc Tee For Plumbing Pipe 3X4 Inch , Upvc Solvent 200Grm - Pvc Heavy Body Solvent For Pvc Larger Dia Pipes And Fittings , Taflon Tape - Plumbing Gas And Thread Sealing Ptfe Leak-Proof, Multi-Purpose Sealant Tape , Pvc Cl Pipe 3X4inch - Pvc U Shaped Pipe Cl S With Flat Nail Ivory Wire And Tube Holder Durable Pipe Clip , Upvc Union 3X4inch - Upvc Union Pipe Fitting, 1.9 Cm 3X4 Inch, White , Upvc Socket Adapter 3X4inch - Upvc Reducing Socket 3X4 Inch To 1X2 Inch White , Upvc Reducing Adapter 1Inch To 3X4inch - Upvc Reducing Socket 3X4 Inch To 1X2 Inch White , Upvc Brass Elbow 3X4inch To 1X2inch - Upvc Brass Elbow For Pipe Fitting 3X4 X 1X2 Inch , Upvc Ball Valve 3X4inch - Upvc Compact Ball Valve 3X4inch 25Mm , Upvc Tank Adapter 3X4inch - Upvc Socket Tank Connector 3X4inch , Steel Tap 1X2inch - Stainless Steel Long Body Taps For Bathroom And Kitchen Taps With Chrome Finish And Quarter Turn Fitting , Water Tank 2000Lit 6 Layer - Water Tank 2000 Lit Six Layer Water Tank 2000 Liter Capacity Blow Mould Tanks Food Grade Antibacterial, Uv And Heat Resistant Tank Hdpe Material White Color , Water Tank 1000Lit 6Layer - Water Tank 1000 Lit Six Layer Water Tank 1000 Liter Capacity Blow Mould Tanks Food Grade Antibacterial, Uv And Heat Resistant Tank Hdpe Material White Color , Upvc Pipe 1Inch - Upvc Water Pipe 1 Inch , Upvc Elbow 1Inch , Upvc Tee 1Inch , Upvc Socket Adapter 1Inch , Upvc Union 1Inch , Pvc Cl Pipe 1Inch , Upvc Tank Adapter 1Inch , Upvc Ball Valve 1Inch , White Board 4X6 - Whiteboard Drywipe Magnetic With Pen Tray And Aluminium Trim, 4 Ft X 6Ft , Casing Patti 2Inch - Cassing Patti 2Inch Designed For Surface-Mounting Electrical Wires , Big Bucket - Big Bucket Industries Unbreakable Strong Plastic Bathroom Bucket 12 Ltr , Wooden Beat 3X4inch Half Round - Half Round Wooden Moulding Beat Patti For Furniture Rack Side Fitting , Nails 1Inch - 1Inch Steel Concrete Nails , Ms Round Bar 30Mm - Ms Round Bar 30 Mm Black Mild Steel Round Bar , Ms Round Bar 40Mm - Ms Round Bar 40 Mm Black Mild Steel Round Bar , Ms Round Bar 45Mm - Ms Round Bar 45 Mm Black Mild Steel Round Bar , Ms Round Bar 50Mm - Ms Round Bar 50 Mm Black Mild Steel Round Bar , Ms Round Bar 60Mm - Ms Round Bar 60 Mm Black Mild Steel Round Bar , Ms Round Bar 65Mm - Ms Round Bar 65 Mm Black Mild Steel Round Bar , Mobile Oil 40No. - Mobile Oil 40No. Engine Oil For Diesel Engine , Cutting Oil - Cutting Oil Water Soluble Cutting Oil , Power Saw Blade 1Inxh X 14Inch - Power Hexa Blade (14Inchx1inchx0.050Inch) Hss Bimetal Power Hacksaw Blade , Hand Hacksaw Blade 1X2x12inch - Hand Hexa Blade 1X2inchx1x2inchx0.050Inch Hss , Emery Paper 80No. - Emery Paper 80No. Coarse Brown Sandpaper For Wood, Metal, Walls And Diy Finishing Medium Size, Emery Material, Paper Backing , Emery Paper 100No. - Emery Paper 100No. Coarse Brown Sandpaper For Wood, Metal, Walls And Diy Finishing Medium Size, Emery Material, Paper Backing , Wire Bursh 4Inch - Steel Wire Brush With Plastic Handle, 5 Rows , Chalk Clolour - Color Chalks Limestone Slate Pencils Chalk Piece Full , Grease - Grease Long Lasting Lubricant For Cars, Buses, Trucks, 2 Wheeler, 3 Wheeler, Agriculture And Construction) , File Card - Abrasive File Card With Wooden Handle , Engine Oil - Engine Oil 20/40No. Engine Oil For Diesel Engine , Service Cable 3 Core 4Mm Flat , Weight Machine 500Kg. Platform Size 2X2 - Electronic Platform Weighing Scale 600X600mm Mild Steel 500Kg Capacity, 50G Accuracy Oiml R76 Compliant, Iso Certified Digital Weight Machine For Shop, Warehouse, Industrial Use , Ladder 20Ft Foldable Type - Aluminum Wall Support Extension Ladder , Router 4G Lte Wireless Dongle , Switch 8 Port 1000Mbps Gigabit - 1000Mbps Full Duplex 8 Port Gigabit Switch Hub Lan Gigabit Ethernet Desktop Network Switches Black Total Quantity : 4361
Contract Date: Ref. Documents Contract Value : 11.85 Lakh
Boards / Undertakings / PSU No of Bidders 4
Madhya Pradesh View Result →
41.
Housing Urban and Rular Development #11306856 AOC
Tender For M.O.W. Work (Additional Room) In Bunglow No. Eg-9/3 And Ek-9/3 Under Section No.1 Survey Sub Dn. Bhopal- 1 M.O.W. Work (Additional Room) in Bunglow No. EG-9/3 and EK-9/3 Under Section No.1 Survey Sub Dn. Bhopal 1st Call P.A.C. 29.64 Lakh,as per Building SOR wef 01-01-2024 Schedule Attached Complition period 90 Days Please Enable Macros to View BoQ information SCHEDULE OF ITEMS Name of work : M.O.W. Work (Additional Room) in Bunglow No. EG-9/3 and EK-9/3 Under Section No.1 Survey Sub Dn. Bhopal Probable Amount of contract : Rs. 29.64 Lacs. (Rs. in Figures) : Time Alloved : 6 months i/c rainy season S.No SOR Item Particulers of Item Unit Rate Remarks 2 2.4 2.4.1 beyond 30 cm girth up to and including 60 cm girth each 350.0 2.4.2 beyond 60 cm girth up to and including 120 cm girth each 1150.0 2.4.3 beyond 120 cm girth up to and including 240 cm girth each 3500.0 2.4.4 above 240 cm girth each 6300.0 3 2.7 2.7.1 Ordinary rock cum 287.0 2.7.2 Hard rock (requiring blasting) cum 519.0 2.7.3 Hard rock (blasting prohibited) cum 828.0 4 2.25 2.25.1 All kinds of soil. cum 30.0 2.25.2 Ordinary or hard rock. cum 53.0 2.26 Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete cum 672.0 Note: - Maximum thickness of this layer shall be 20 cm. 5 2.27 2.27.1 With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) cum 393.0 2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm cum 331.0 6 2.28 2.28.1 All kinds of soil. each 42.0 2.28.2 Ordinary rock each 68.0 2.28.3 Hard rock (requiring blasting) each 138.0 2.28.4 Hard rock (blasting prohibited) each 151.0 7 2.3 2.30.1 Along external wall where the apron is not provided using chemical emulsion@ 7.5 liters / sqm of the vertical surfaceof the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 36.0 2.30.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 42.0 2.30.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. sqm 199.0 2.30.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre 50.0 2.30.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litresper hole by drilling 6 mm dia holes at downward angle of 45 degree at 150mm centre to centre and sealing the same. metre 201.0 8 2.41 2.42.1 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. cum 331.0 9 4.1 4.1.1 With 20mm nominal size graded stone aggregate. 4.1.1.1 M-25 – Grade concrete cum 6338.0 4.1.1.2 M-20 – Grade concrete cum 4933.0 4.1.1.3 M-15 – Grade concrete cum 4471.0 4.1.1.4 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) cum 3890.0 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.1 M-15 - Grade concrete cum 4403.0 4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) cum 3808.0 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate cum 3474.0 4.1.3 With fly ash. Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. 10 4.2 string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing : 4.2.1 With 20mm nominal size graded stone aggregate 4.2.1.1 M-25 – Grade concrete Cum 6582.0 4.2.1.2 M 20 – Grade concrete Cum 5177.0 4.2.1.3 M 15 – Grade concrete Cum 4714.0 4.2.1.4 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Cum 4134.0 4.2.2 With 40mm nominal size graded stone aggregate 4.2.2.1 M-15 - Grade concrete cum 4647.0 4.2.2.2 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate cum 4052.0 11 4.3 4.3.1 Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. Sqm 169.0 4.3.2 above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. sqm 267.0 4.3.3 Above plinth: Columns, pillars, posts and struts. Sqm 356.0 12 4.6 4.6.1 M-25 (With 20mm nominal size graded stone aggregate) cum 5095.0 4.6.2 M-20 (With 20mm nominal size graded stone aggregate) cum 5558.0 4.6.3 M-15 (With 20mm nominal size graded stone aggregate) cum 5095.0 4.6.4 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. cum 4515.0 4.1 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Sqm 200.0 13 5.1 5.1.1 M-20 Grade Concrete cum 6153.0 5.1.2 M-15 Grade Concrete cum 5397.0 14 5.2 5.2.1 M-20 Grade Concrete cum 6231.0 15 5.3 5.3.1 M-20 Grade Concrete cum 6541.0 16 5.4 5.4.1 M-20 Grade Concrete cum 5542.0 17 5.5 5.5.1 M-20 Grade Concrete cum 6906.0 18 5.6.1 5.6.1 M-20 Grade Concrete cum 6337.0 19 5.7.1 5.7.1 M-20 Grade Concrete cum 5448.0 20 5.9.1 5.9.1 Foundations, footings, bases of columns, etc. for concrete upto plinth level sqm 190.6 5.9.2 Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. 5.9.2.1 Uptoplinthlevel. sqm 219.0 5.9.2.2 Above plinth upto 3.6 m height from plinth level sqm 330.0 5.9.2.3 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. sqm 40.0 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 439.6 5.9.4 Shelves(Cast in situ) sqm 290.0 5.9.5 Lintels, beams, girders, bressumers and cantilevers sqm 356.0 5.9.6 Columns, P i l l a r s , Piers, Abutments, sqm 471.2 Posts and Struts. 5.9.7 Stairs, (excluding landings) except spiral- Staircases. sqm 435.7 5.9.8 Spiral staircases (including landing). sqm 450.0 5.9.9 Arches, domes,vaults upto 6m span sqm 1141.6 5.9.10 Extra for arches, domes, vaults exceeding 6 m span sqm 451.3 5.9.11 Chimneys and shafts sqm 294.0 5.9.12 Coffer/waffle slab of any size or shape as shown in the drawing. sqm 1481.0 5.9.15 Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). sqm 0.2 5.9.16 Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. sqm 191.0 5.9.17 Cornices and mouldings sqm 565.0 5.9.18 Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. sqm 529.6 5.9.19 Weather shade, Chajjas, corbels etc., including Edges. sqm 534.2 5.9.20 Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of C.E./S.E. in case of B & R works . sqm 575.35 5.9.21 Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of C.E./S.E. in case of B & R works . sqm 521.2 21 5.1 5.10.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). sqm 212.0 22 5.12 5.12.1 50 mm thick sqm 790.0 5.12.2 40 mm thick sqm 689.0 5.12.3 25 mm thick sqm 598.0 23 5.16 5.16.1 Mild steel and Medium Tensile steel bars. kg 78 .00 5.16.2 Hard drawn steel wire kg 75.0 5.16.3 Cold twisted bars (CTD) kg 81.0 5.16.4 Hot rolled deformed bars kg 81.0 5.16.5 Hard drawn steel wire fabric kg 76.0 5.16.6 Thermo-Mechanically Treated bars.FE 500 D or more conforming to IS 1786 kg 80.0 5.16.7 Thermo-Mechanically Treated bars. FE 500 conforming .to IS 1786 kg 77.0 5.16.8 Corrosion resistance Steel bar Grade Fe-500 D & above , use with prior permission of C.E. Kg 98.0 24 5.22 5. 22.1 12 mm thick sqm 402.0 5. 22.2 25 mm thick sqm 574.0 5. 22.3 50 mm thick sqm 674.0 5.23 Providing and fixing sheet covering over expansion joints with iron screws as per design. 5. 23.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 5. 23.1.1 150mm wide. RM 102.0 5. 23.1.2 200mm wide. RM 137.0 5. 23.1.3 250mm wide. RM 153.0 5. 23.2 Aluminium fluted strips 3.15mm thick. 5. 23.2.1 150 mm wide. RM 483.0 5. 23.2.2 200 mm wide. RM 646.0 5. 23.2.3 250 mm wide. RM 725.0 5. 23.3 Stainless steel Grade 304 plate-1.0 mm thick 5. 23.3.1 150 mm wide. RM 367.0 5. 23.3.2 200 mm wide. RM 443.0 5. 23.3.3 250 mm wide. RM 555.0 25 5.24 5.24.1 Preparation of grooves RM 18.5 5.24.2 Preparation of Drip course RM 30.0 26 5.32 5.32.1 Non pigmented wet curing compound sqm 93.0 5.32.2 Pigmented wet curing compound. sqm 100.0 27 6.1 6.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5818.0 6.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5626.0 28 6.2 6.2.1 Cement mortar 1:4 (1 cement : 4 sand) cum 6012.0 6.2.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5821.0 6.3 Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not lessthan 40kg /cm2 and water absorptionnot more than 15% in foundation and plinth i/c curing etc. complete. 6.3.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5252.0 6.3.2 Cement Mortar 1:6 (1 cement:6 sand). cum 5061.0 29 6.4 6.4.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5446.0 6.4.2 Cement Mortar 1:6 (1 cement:6 sand). cum 5255.0 30 6.5 6.5.1 Cement mortar 1:4 (1 cement : 4 sand) cum 4347.0 6.5.2 Cement Mortar 1:6 (1 cement: 6 sand). cum 4155.0 31 6.6 6.6.1 Cement mortar 1:4 (1 cement : 4 sand) cum 4541.0 6.6.2 Cement Mortar 1:6 (1 cement : 6 sand) cum 4350.0 32 6.7 6.7.1 Having 100 kg / cm2 average compressive strength. 6.7.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5384.0 6.7.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5162.0 6.7.2 Having 75 kg / cm2 average compressive strength. 6.7.2.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5271.0 6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5049.0 6.7.3 Having 50 kg / cm2 average compressive strength. 6.7.3.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5158.0 6.7.3.2 Cement mortar 1:6 (1 cement : 6 sand) cum 4936.0 33 6.8 6.8.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5287.0 6.8.2 Cement mortar 1:6 (1 cement : 6 sand) cum 5095.0 34 6.9 Cement Mortar 1:4 ( 1 cement : 4 sand) 35 6.12 6.12.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 697.0 6.12.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 673.0 36 6.13 6.13.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 639.0 6.13.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 615.0 37 6.14 6.14.1 Cement mortar 1:3 (1 cement : 3 sand) sqm 546.0 6.14.2 Cement mortar 1:4 (1 cement : 4 sand) sqm 522.0 38 6.15 6.15.1 Having 100 kg/cm2 average compressive strength. 6.15.1.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 570.0 6.15.1.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 551.0 6.15.2 Having 75 kg/cm2 average compressive strength. 6.15.2.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 524.0 6.15.2.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 505.0 6.15.3 Having 50 kg/cm2 average compressive strength. 6.15.3.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm 479.0 6.15.3.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm 459.0 39 6.37 6.37.1 Having100 kg / cm2 average compressive strength. 6.37.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum 5115.0 6.37.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum 4904.0 6.37.2 Having75 kg / cm2 average compressive strength. 6.37.2.1 Cement mortar 1:4 (1 cement : 4sand) cum 5007.0 6.37.2.2 Cement mortar 1:6 (1 cement : 6sand) cum 4797.0 6.37.3 Having50 kg / cm2 averagecompressive strength. 6.37.3.1 Cement mortar 1:4 (1 cement : 4sand) cum 4900.0 6.37.3.2 Cement mortar 1:6 (1 cement : 6sand) cum 4689.0 40 9.3 9.3.1 Sal wood cum 76229.0 9.3.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. cum 77538.0 9.3.3 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. cum 64833.0 41 9.4 9.4.1 Second class teak wood cum 9062.0 9.4.2 Sal wood cum 7131.0 9.4.3 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. cum 7275.0 9.4.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. cum 6030.0 9.5.4.1 35 mm thick sqm 1089.0 9.5.4.2 30 mm thick sqm 969.0 42 9.6 9.6.1 Second class teak wood sqm 2215.0 9.6.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood sqm 1763.0 9.6.3 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. sqm 971.0 9.6.4 Ply wood 5 ply, 9 mm thick : 9.6.4.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. sqm 1439.0 9.6.4.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type sqm 1369.0 9.6.5 Ply wood 7 ply, 9 mm thick : 9.6.5.1 Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. sqm 1861.0 9.6.5.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type sqm 1650.0 9.6.6 Particle Board 12 mm thick 9.6.6.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. sqm 791.0 9.6.6.2 Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. sqm 1087.0 9.6.6.3 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. sqm 1333.0 9.6.6.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. sqm 1390.0 9.6.6.5 Coir Veneer Board (conforming to IS 14842) 12 mm thick sqm 1298.0 9.6.7 Float glass panes 9.6.7.1 4 mm thick glass pane (weight not less than 10 kg/sqm) sqm 973.0 9.6.7.2 5 mm thick glass pane (weight not less than 12.5 kg/sqm) sqm 1046.0 9.6.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading sqm 1532.0 9.6.8.1 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum sqm 580.0 9.6.8.2 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick laminated sheet with density not less than 1400 kg/cum sqm 754.0 43 9.14 9.14.1 Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. Sqm 170.0 9.14.2 ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. Sqm 53.0 44 9.15 9.15.1 Panelled or panelled and glazed shutters : 9.15.1.1 Using ISI marked anodised aluminium butt hinges with necessary screws. Sqm 2736.0 9.15.1.2 Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Sqm 2753.0 9.15.2 Glazed shutters : 9.15.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. Sqm 2815.0 9.15.2.2 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Sqm 2759.0 45 9.16 9.16.1 12 mm thick Sqm 555.0 9.16.2 18 mm thick Sqm 654.0 46 9.17 9.17.1 18 mm thick Sqm 1270.0 9.17.2 25 mm thick Sqm 1383.0 47 9.18 9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 2823.0 9.18.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 2648.0 9.18.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. Sqm 2465.0 48 9.19 9.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 1870.0 9.19.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 1696.0 9.19.3 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. Sqm 1623.0 49 9.2 9.21 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Sqm 401.0 9.22 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : 9.22.1 Rectangular or square. Sqm 157.0 9.22.2 Circular. Sqm 244.0 50 9.25 9.25.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.1.1 Second class teak wood. Sqm 3174.0 9.25.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2599.0 9.25.1.3 Kiln seasoned selected class of sheesham wood. Sqm 2452.0 9.25.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.2.1 Second class teak wood. Sqm 3291.0 9.25.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2716.0 9.25.2.3 Kiln seasoned selected class of sheesham wood. Sqm 2569.0 9.25.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. 9.25.3.1 Second class teak wood. Sqm 2797.0 9.25.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2306.0 9.25.3.3 Kiln seasoned selected class of sheesham wood. Sqm 2179.0 9.25.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size. 9.25.4.1 Second class teak wood. Sqm 2914.0 9.25.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. Sqm 2423.0 9.25.4.3 Kiln seasoned selected class of sheesham wood. Sqm 2296.0 9.26.2 30 mm thick shutters Sqm 2102.0 51 9.57 9.57.1 300x16 mm Each 170.0 9.57.2 250x16 mm Each 157.0 52 9.58 9.58.1 250x10 mm Each 68.0 9.58.2 200x10 mm Each 60.0 9.58.3 150x10 mm Each 42.0 9.58.4 100x10 mm Each 35.0 53 9.6 9.60.1 300x20x6 mm Each 72.0 9.60.2 250x20x6 mm Each 67.0 54 9.61 9.61.1 125 mm Each 27.0 9.61.2 100 mm Each 25.0 9.61.3 75 mm Each 24.0 55 9.62 9.62.1 150 mm Each 23.0 9.62.2 115 mm Each 20.0 9.62.3 90 mm Each 17.0 56 9.63 9.63.1 300 mm weighing not less than 200 gms. Each 40.0 9.63.2 250 mm weighing not less than 150 gms. Each 34.0 9.63.3 200 mm weighing not less than 120 gms. Each 28.0 57 9.65 9.65.1 300x16 mm Each 389.0 9.65.2 250x16 mm Each 326.0 9.65.3 400x16mm Each 601.0 58 9.66 9.66.1 250x10 mm Each 148.0 9.66.2 200x10 mm Each 93.0 9.66.3 150x10 mm Each 71.0 9.66.4 100x10 mm Each 50.0 59 9.68 9.68.1 300x20x6 mm Each 211.0 9.68.2 250x20x6 mm Each 173.0 9.69 Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : Each 9.69.1 125 mm Each 60.0 9.69.2 100 mm Each 54.0 9.69.3 75 mm Each 48.0 60 9.7 9.70.1 150 mm each 37.0 9.70.2 115 mm each 33.0 9.70.3 90 mm each 26.0 61 9.73 9.73.1 125x64x1.90 mm each 67.0 9.73.2 100X58X1.90 mm each 59.0 9.73.3 75x47x1.80 mm each 39.0 9.73.4 50x37x1.50 mm each 25.0 62 9.74 9.74.1 125x64x2.50 mm each 76.0 9.74.2 100x60x2.50 mm each 60.0 9.74.3 75x50x2.50 mm each 46.0 63 9.76 9.77 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 9.77.1 125x85x5.5 mm (heavy type) each 456.0 9.77.2 125x70x4 mm (ordinary type) each 148.0 9.77.3 100x85x5.5 mm (heavy type) each 387.0 9.77.4 100x70x4 mm (ordinary type) each 117.0 9.77.5 75x65x4 mm (heavy type) each 145.0 9.77.6 75x40x2.5 mm (ordinary type) each 74.0 9.77.7 50x40x2.5 mm (ordinary type) each 32.0 64 9.78 9.78.1 150x125x27x5 mm each 385.0 9.78.2 125x125x27x5 mm each 345.0 9.78.3 100x125x27x5 mm each 304.0 9.78.4 75x100x20x3.2 mm each 239.0 65 9.79 9.79.1 400x10 mm each 400.0 9.79.2 250x10 mm each 329.0 9.79.3 200x10 mm each 261.0 9.79.4 150x10 mm each 221.0 9.79.5 100x10 mm each 142.0 66 9.8 9.80.1 300x16x5 mm each 237.0 9.80.2 250x16x5 mm each 225.0 67 9.81 9.81.1 125 mm each 205.0 9.81.2 100 mm each 181.0 9.81.3 75 mm each 141.0 68 9.82 9.82.1 300x16mm each 407.0 9.82.2 250x16mm each 374.0 69 9.87 9.87.1 40 mm each 144.0 9.87.2 50 mm each 150.0 9.87.3 65 mm each 162.0 9.87.4 75 mm each 185.0 70 9.99 9.99.1 Size 40 mm each 144.0 9.99.2 Size 50 mm each 156.0 9.99.3 Size 65 mm each 167.0 9.99.4 Size 75 mm each 196.0 71 9.101 9.101.1 300x16mm each 268.0 9.101.2 250x16mm each 245.0 72 9.102 9.102.1 400X10mm each 260.0 9.102.2 300x10mm each 198.0 9.102.3 250x10mm each 164.0 9.102.4 200x10 mm each 113.0 9.102.5 150x10 mm each 91.0 9.102.6 100x10 mm each 73.0 73 9.103 9.103.1 300x16x5mm each 255.0 9.103.2 250x16x5mm each 243.0 74 9.108 9.108.1 125x75x4 mm each 115.0 9.108.2 125x63x4 mm each 108.0 9.108.3 100x75x4 mm each 95.0 9.108.4 100x63x4 mm each 93.0 9.108.5 100x63x3.2 mm each 90.0 9.108.6 75x63x4 mm each 77.0 9.108.7 75x63x3.2 mm each 75.0 9.108.8 75x45x3.2 mm each 67.0 75 9.109 9.109.1 300x16 mm each 241.0 9.109.2 250x16 mm each 195.0 76 9.11 9.110.1 400X10mm each 123.0 9.110.2 300x10 mm each 114.0 9.110.3 250x10 mm each 102.0 9.110.4 200x10 mm each 82.0 9.110.5 150x10 mm each 69.0 9.110.6 100x10 mm each 55.0 77 9.111 78 9.113 9.113.1 125 mm each 75.0 9.113.2 100 mm each 55.0 9.113.3 75 mm each 46.0 79 9.114 9.114.1 Single rubber stopper each 35.0 9.114.2 Twin rubber stopper each 86.0 80 9.116 81 9.117 82 9.126 83 9.127 84 9.128 85 9.129 9.129.1 Triple strip vertical type. each 28.0 9.129.2 Double strip (horizontal type). each 23.0 9.131 Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge. 9.131.1 300mm long each set 209.0 9.131.2 450mm long each set 256.0 9.131.3 500mm long each set 302.0 86 9.132 87 9.133 9.133.1 Marine plywood conforming to IS: 710 sqm 1591.0 9.133.2 Fire retardant plywood conforming to IS: 5509. sqm 1660.0 88 9.134.1 9.134.1 1.5 mm thick. sqm 851.0 89 9.134.2 90 9.138 9.138.1 12 mm thick. sqm 919.0 9.138.2 18 mm thick. sqm 1161.0 9.138.3 25 mm thick. sqm 1230.0 91 9.139 92 9.14 9.140.1 18 mm thick sqm 1493.0 9.140.2 25 mm thick sqm 2017.0 93 9.145 9.145.1 Board 12 mm thick sqm 811.0 9.145.2 Board 18 mm thick sqm 943.0 9.146 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). 9.146.1 18 mm thick sqm 1055.0 9.146.2 25 mm thick sqm 1420.0 94 9.147 95 9.148 96 9.15 9.150.1 12 mm thick commercial ply conforming to IS: 1328 BWR type. Sqm 1210.0 9.150.2 18 mm thick commercial ply conforming to IS: 1328 BWR type. Sqm 1320.0 97 9.158 9.158.1 Extruded section Profile size 48x40 mm. metre 203.0 9.158.2 Extruded section Profile size 42x50 mm. metre 208.0 98 9.165 99 9.166 9.166.1 Plain PVC door shutters. sqm 2026.0 9.166.2 Pre laminated PVC door shutters. sqm 2490.0 100 9.167 101 9.168 as panel. The styles andrails will be mitred cut and joint with the help of PVC solvent cement and self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mmand 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturers specifications and direction of Engineer-in-charge: 9.168.1 Non decorative finish. sqm 2026.0 9.168.2 Decorative finish (both side wood grained finish). sqm 2432.0 102 9.169 9.169.1 Single rebate (75 mm X 50 mm) RM 459.0 9.169.2 Single rebate (100 mm X50 mm) RM 720.0 9.169.3 Single or double rebate (125 mm X 65 mm) RM 923.0 103 9.17 9.170.1 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 2250.0 9.170.2 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 3250.0 9.170.3 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 3693.0 9.170.4 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm 4135.0 104 9.186 105 9.187 9.187.1 Casement Window (Outward/Inward opening) with hinge System. 9.187.1.1 Frame (50 mm x 50mm) metre 422.0 9.187.1.2 Sash (Style and Rail) (62 mm x 34 mm) metre 403.0 9.187.1.3 Mullion (intermediate Section) (66mm x 50 mm) metre 434.0 9.187.1.4 ‘T Profile (one vertical length in between two shutters) (24mm x 34.5mm) metre 99.0 9.187.1.5 Glazing bead (12mm x 18mm) metre 130.0 9.187.2 Casement Window (With friction hinge and outward opening) 9.187.2.1 Casement Frame (67mm x 62mm) metre 495.0 9.187.2.2 Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) metre 519.0 9.187.2.3 Casement Glazing bead (35mm x 18 mm) metre 178.0 9.187.3 Sliding Window (Two Track, 2/4 Shutters) 9.187.3.1 Two Track Sliding Frame (67mm x 52mm) metre 9.187.3.2 Sliding window Sash (60mm x 44mm) metre 529.0 9.187.3.3 Sliding Interlock for Window (one vertical length in each shutter)(45.5 mm x 28 mm) metre 139.0 9.187.3.4 Sliding Glazing bead (35 mm x 18 mm) metre 178.0 9.187.4 Sliding Door (Two Track, 2/4 Shutters) 9.187.4.1 Two Track Sliding Frame (67mm x 52mm) metre 539.0 9.187.4.2 Sliding Door Sash (80mm x 44mm) metre 653.0 9.187.4.3 Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm) metre 139.0 9.187.4.4 Sliding Glazing bead (35 mm x 18 mm) metre 178.0 106 9.188 9.188.1 200 x 19 x 1.9 mm each 321.0 9.188.2 250 x 19 x 1.9 mm each 369.0 9.188.3 300 x 19 x 1.9 mm each 462.0 9.188.4 350 x 19 x 1.9 mm each 526.0 9.188.5 400 x 19 x 1.9 mm each 636.0 107 9.189 108 9.191 109 9.192 110 9.193 111 9.194 9.194.1 Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) sqm 6798.0 9.194.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). sqm 6221.0 9.194.3 Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). sqm 4842.0 9.194.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) sqm 6681.0 9.194.5 Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.) sqm 6942.0 9.194.6 Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion67 x 80 all having wall thickness of 2.3 ±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) sqm 5290.0 9.195 Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). 9.195.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) sqm 4860.0 9.196 Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made fromroll forming process of required length(shape & size according to UPVC profile),UPVC 9.196.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). sqm 7085.0 9.196.2 Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±.0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). sqm 7063.0 9.197 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profileof frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) 9.197.1 Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) sqm 5060.0 9.197.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). sqm 6880.0 9.197.3 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). sqm 5134.0 9.197.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area ofwindow above 1.75 sqm). sqm 6371.0 9.197.5 Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) sqm 5913.0 112 9.198 9.198.1 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto sqm 4332.0 4.00 sqm). 9.198.2 Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). sqm 3532.0 9.199 Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in- built roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension UPVC extruded glazing beads, UPVC extruded interlock and UPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), 9.199.1 Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mmand single glazing bead / double glazing bead of appropriate dimension. (Area ofdoor above 2.00 sqm upto 10.00 sqm). sqm 3676.0 9.199.2 Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mmand single glazing bead / double glazing bead of appropriate dimension. (Area ofdoor above 8.00 sqm upto10.00 sqm). sqm 3810.0 9.199.3 Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) sqm 4361.0 9.199.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mmand single glazing bead / double glazing bead of appropriate dimension. (Area ofdoor above 2.00 sqm upto 5.00 sqm) sqm 5617.0 9.2 Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S.frame shall have a coat of steel primers of approved make and manufacture.M.S. frame sqm 3908.0 113 9.201 9.201.1 24 to 25 mm thick plain solid PVC flush door shutter sqm 2250.0 9.201.2 28 to 30 mm thick plain solid PVC flush door shutter sqm 3229.0 114 9.202 9.202.1 1mm thick laminated sheet sqm 3693.0 9.202.2 0.12 mm thick laminated sheet sqm 3461.0 115 9.255 9.255.1 9 mm thick BWP grade commercial Sqm 841.0 plywood 9.255.2 12 mm thick BWP grade commercial Sqm 1064.0 plywood 9.255.3 18 mm thick BWP grade commercial Sqm 1169.0 plywood 9.255.4 25 mm thick BWP grade commercial Sqm 1366.0 plywood 116 9.256 9.256.1 25 mm outer dia & 300 mm long Each Set 984.0 9.256.2 32 mm outer dia & 450 mm long Each Set 1716.0 9.256.3 32 mm outer dia & 600 mm long Each Set 2041.0 117 9.257 9.196, 9.197, 9.198, 9.199) 118 9.258 9.258.1 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. sqm 1040.0 119 10.7 10.7.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area. sqm 747.0 10.7.2 Exceeding 16.80 sqm in area. sqm 782.0 120 10.11 10.11.1 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). kg 77.0 121 10.12 10.12.1 Profile B of 1.60mm thick single rebate of size 80mmx50mm 10.12.1.1 Fixing with adjustable lugs with split end tail to each jamb. meter 402.0 10.12.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 394.0 10.12.2 Profile C of 1.60mm thick single rebate of size 100mmx50mm 10.12.2.1 Fixing with adjustable lugs with split end tail to each jamb. meter 431.0 10.12.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 424.0 10.12.3 Profile E of 1.60mm thick double rebate of size 115mmx50mm 10.12.3.1 Fixing with adjustable lugs with split end tail to each jamb. meter 472.0 10.12.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 464.0 10.12.4 Profile B of 1.25mm thick single rebate of size 80mmx50mm 10.12.4.1 Fixing with adjustable lugs with split end tail to each jamb. meter 356.0 10.12.4.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 348.0 10.12.5 Profile C of 1.25mm thick single rebate of size 100mmx50mm 10.12.5.1 Fixing with adjustable lugs with split end tail to each jamb. meter 385.0 10.12.5.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 377.0 10.12.6 Profile E of 1.25mm thick double rebate of size 115mmx50mm 10.12.6.1 Fixing with adjustable lugs with split end tail to each jamb. meter 414.0 10.12.6.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter 406.0 122 10.14 10.14.1 Hot finished welded type tubes kg 117.0 10.14.2 Hot finished seamless type tubes kg 123.0 10.14.3 Electric resistance or induction butt welded tubes. kg 142.0 10.15 Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats ofEpoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. kg 132.0 123 10.17 124 10.18 125 10.19 126 10.21 127 10.22 10.22.1 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. kg 101.0 10.22.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 105.0 128 10.23 10.23.1 M.S. tube. kg 117.0 10.23.2 E.R.W. tubes. kg 132.0 129 10.25 130 10.26 10.26.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides sqm 646.0 10.26.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. sqm 1334.0 131 10.27 10.27.1 With 4.0 mm thick glass panes sqm 792.0 10.27.2 With 5.50 mm thick glass panes sqm 873.0 10.27.3 With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. sqm 916.0 10.27.4 With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm boxbeading. sqm 611.0 10.27.5 With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. sqm 936.0 10.27.6 With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 750.0 10.27.7 With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 800.0 10.27.8 With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm 872.0 132 10.28 10.28.1 With 4.0 mm thick glass panes. sqm 259.0 10.28.2 With 5.5 mm thick glass panes. sqm 262.0 133 10.29 134 11.19 11.19.1 Makrana white second quality. sqm 3051.0 11.19.2 Raj Nagar plain. sqm 1381.0 11.19.3 Agaria White/Morgarh sqm 1882.0 11.19.4 Katni marble sqm 1555.0 11.19.5 Black Zebra. sqm 1315.0 11.19.6 Udaipur / Baroda green marble sqm 1649.0 11.19.7 Pink plain marble. sqm 1448.0 11.19.8 Jaisalmer Yellow sqm 1582.0 135 11.2 11.20.1 Makrana white second quality. sqm 3675.0 11.20.2 Raj Nagar plain. sqm 1932.0 11.20.3 Agaria White/Morgarh sqm 2455.0 11.20.4 Katni marble sqm 2113.0 11.20.5 Black Zebra. sqm 1863.0 11.20.6 Udaipur / Baroda green marble sqm 2211.0 11.20.7 Pink plain marble. sqm 2002.0 11.20.8 Jaisalmer Yellow sqm 2141.0 136 11.21 11.21.1 Makrana white second quality. sqm 3773.0 11.21.2 Raj Nagar plain. sqm 2737.0 11.21.3 Agaria White/Morgarh sqm 2553.0 11.21.4 Katni marble sqm 2219.0 11.21.5 Black Zebra. sqm 1961.0 11.21.6 Udaipur / Baroda green marble sqm 2309.0 11.21.7 Pink plain marble. sqm 2100.0 11.21.8 Jaisalmer Yellow sqm 2240.0 137 11.22 11.22.1 Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black sqm 1797.0 11.22.2 Granite fine grained dark crystal of other colours and various patterns sqm 2356.0 11.22.3 Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Sqm 2113.0 11.22.4 Granite grey/pink/brown with various patterns Sqm 1808.0 11.22.5 Cuddpah stone sqm 1279.0 138 11.23 139 11.24 140 11.25 141 11.29 11.29.1 Area of slab over 0.50 sqm 11.29.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2919.0 11.29.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2675.0 11.29.1.3 Gray/Pink/Brown or equivalent with various patterns sqm 2370.0 11.29.2 Area of slab upto 0.50 sqm 11.29.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2705.0 11.29.2.2 Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2486.0 11.29.2.3 Gray/Pink/Brown or equivalent with various patterns sqm 2212.0 142 11.3 11.30.1 Area of slab over 0.50 sqm 11.30.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2642.0 11.30.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2422.0 11.30.1.3 Gray/Pink/Brown or equivalent with various patterns sqm 2153.0 11.30.2 Area of slab upto 0.50 sqm 11.30.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2455.0 11.30.2.2 Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm 2258.0 11.30.2.3 Gray/Pink/Brown or equivalent with various patterns sqm 2011.0 patterns 143 11.32 144 11.33 11.33.1 Flamed Finish Granite sqm 2542.0 11.33.2 Leather Finish Granite sqm 2809.0 145 11.34 146 11.36 Note: - Deduction shall be made for not mirror polishing according to item no 11.43 147 11.37 148 11.38 11.38.1 10-12 mm thick sqm 1177.0 11.38.2 20 mm thick sqm 1231.0 149 11.39 150 11.4 11.40.1 Marble work meter 164.0 11.40.2 Granite work. meter 269.0 151 11.41 152 11.42 153 11.43 154 11.44 11.44.1 Red sand stone sqm 578.0 11.44.2 White sand stone sqm 578.0 11.44.3 Grey lime stone sqm 578.0 11.44.4 Kota stone sqm 678.0 155 11.47 156 11.48 157 11.49 158 11.52 159 11.53 160 11.54 161 11.55 162 11.56 163 12.63 11.63.1 Fastener with threaded dia 6 mm. each 25.0 11.63.2 Fastener with threaded dia 10 mm. each 29.0 11.63.3 Fastener with threaded dia 12 mm. each 46.0 164 11.66 165 11.72 proper embedding/ laying of inter locking paver blocks into the bedding layer through vibratory compaction byusing plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand including locking with M15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturers specifications and direction of Engineer-in-Charge. 11.72.1 80 mm thick C.C. paver block of M-35 grade sqm 805.0 11.72.2 60 mm thick C.C. paver block of M-35 grade sqm 680.0 11.72.3 60 mm thick C.C. paver block of M-30 grade sqm 605.0 166 11.75 including fixing of granite stone door frame with epoxy resin based adhesive including secured to the backing by means of cramps, drilling of hole with rawl plugs and screws 75mm long cleaning etc. complete. Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge. 11.75.1 Granite Door frame for 100mm thick wall Thickness. metre 1010.0 11.75.2 Granite Door frame for 200mm thick wall Thickness. metre 1512.0 167 11.76 11.76.1 Plain ivory light shade sqm 950.0 Size 600X600mm thickness 9-10mm 11.76.2 Dark shade (terracotta) sqm 1033.0 Size 600X600mm thickness 9-10mm 168 11.77 11. 77.1 Plain ivory light shade sqm 940.0 Size 600X600mm thickness 9-10mm 11. 77.2 Dark shade (terracotta) sqm 1022.0 Size 600X600mm thickness 9-10mm 169 11.8 11.80.1 In light colour and shades as ivory, beige blanco, grey etc. 11.80.1.1 (a) Size 300X300 mm thickness 9-10 mm sqm 934.0 11.80.1.2 (b) Size 600X600mm thickness 9-10mm sqm 1206.0 11.80.1.3 (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm 1349.0 11.80.2 In dark colour and shade etc. 11.80.2.1 (a) Size 300X300 mm thickness 9-10 mm sqm 946.0 11.80.2.2 (b) Size 600X600mm thickness 9-10mm sqm 1340.0 11.80.2.3 (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm 1546.0 170 11.81 11. 81.1 In light colour and shades as ivory, beige blanco, grey etc. 11. 81.1.1 (a) Size 300X300 mm thickness 9-10 mm sqm 923.0 11. 81.1.2 (b) Size 600X600mm thickness 9-10mm sqm 1196.0 11. 81.2 In dark colour and shades etc. 11. 81.2.1 (a) Size 300X300 mm thickness 9-10 mm sqm 935.0 11. 81.2.2 (b) Size 600X600mm thickness 9-10mm sqm 1329.0 171 11.82 11. 82.1 For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand) 11. 82.1.1 Size 600X600 mm thickness 9-10 mm sqm 1140.0 11. 82.1.2 Size 800X800mm thickness 9-10 mm sqm 1261.0 11. 82.1.3 Size 800X1600mm thickness 9-10 mm sqm 1489.0 11. 82.1.4 Size 1000X1000mm thickness 9-10 mm sqm 1388.0 11. 82.1.5 Size 600X1200 mm thickness 9-10 mm sqm 1235.0 11. 82.1.6 Size 800X1200 mm thickness 9-10 mm sqm 1450.0 11. 82.1.7 Size 1200X1200 mm thickness 9-10 mm sqm 1596.0 11. 82.1.8 Size 1200X1800mm thickness 9-10 mm sqm 1715.0 11. 82.1.9 Size 1200X2400 mm thickness 9-10 mm sqm 2403.0 172 11.83 11. 83.1 For skirting, riser, dado and wall lining etc.glossy/ rustic /stain/mattfinished in all colours and shades 11. 83.1.1 Size 300X600 mm thickness 9-10 mm sqm 1048.0 11. 83.1.2 Size 600X600 mm thickness 9-10 mm sqm 1129.0 11. 83.1.3 Size 800X800mm thickness 11-12mm sqm 1250.0 11. 83.1.4 Size 600X1200 mm thickness 11-12mm sqm 1224.0 11. 83.1.5 Size 800X1200 mm thickness 11-12mm sqm 1440.0 173 11.84 11. 84.1 Area of tiles not less 0.18 sqm 11. 84.1.1 Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter sqm 2296.0 11. 84.1.2 Course granite light Black/light Red/ off White with crystals of other colors and various patterns sqm 2113.0 11. 84.1.3 Gray/Pink/Brown with various patterns sqm 1879.0 174 11.85 11. 85.1 Area of tiles not less 0.18 sqm 11. 85.1.1 Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter sqm 1775.0 11. 85.1.2 Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns sqm 1610.0 11. 85.1.3 Gray/Pink/Brown with various patterns sqm 1404.0 175 11.97 Size 800X1600 mm thickness 8-9 mm Sqm 1778.0 176 11.102 177 11.103 178 12.4 12.4.1 0.80mm thick with zinc coating not less than 275gm/m² meter 500.0 12.4.2 0.63mm thick with zinc coating not less than 275gm/m² meter 431.0 179 12.7 12.7.1 0.80mm thick with zinc coating not less than 275gm/m² meter 459.0 12.7.2 0.63mm thick with zinc coating not less than 275gm/m² meter 402.0 180 12.12 12.12.1 Corrugated serrated adjustable ridges meter 367.0 12.12.2 Plain wing adjustable ridges meter 311.0 12.12.3 Close fitting adjustable ridges meter 420.0 12.12.4 Unserrated adjustable hips meter 506.0 181 12.13 12.13.1 Corrugated apron pieces meter 340.0 12.13.2 Eaves filler pieces meter 232.0 12.13.3 North light curves meter 500.0 12.13.4 ventilator curves meter 622.0 12.13.5 Barge boards meter 623.0 12.13.6 Ridge finials pair 229.0 12.13.7 Special north light curves each 753.0 12.13.8 S type louvers meter 418.0 182 12.14 183 12.15 primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 184 12.16 12.16.1 Ridges plain (500 - 600mm). meter 320.0 12.16.2 Flashings/ Aprons.( Upto 600 mm) meter 284.0 12.16.3 North light curves. meter 341.0 12.16.4 Barge board (Upto 300 mm) meter 274.0 12.16.5 Crimp curve sqm 315.0 12.16.6 Gutter. (600 mm over all girth) meter 781.0 185 12.17 12.17.1 2mm thick corrugated (2.5 or 4.2 or 6) or step-down (2or 3or 6) as specified. sqm 1031.0 12.17.2 2mm thick flat. sqm 955.0 186 12.23 187 12.24 188 12.26 189 12.27 190 12.32 12.32.1 75 mm diameter (minimum wall thickness 1.8mm) metre 136.0 12.32.2 110 mm diameter (minimum wall thickness 2.2mm) metre 238.0 191 12.33 12.33.1 Coupler 12.33.1.1 75 mm (minimum wall thickness 1.8mm) each 67.0 12.33.1.2 110 mm (minimum wall thickness 2.2mm) each 102.0 12.33.2 Single push fit Coupler : 12.33.2.1 75 mm (minimum wall thickness 1.8mm) each 121.0 12.33.2.2 110 mm (minimum wall thickness 2.2mm) each 94.0 12.33.3 Single tee with door 12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) each 106.0 12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) each 176.0 12.33.4 Single tee without door 12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) each 106.0 12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) each 163.0 12.33.5 Bend 87.5° 12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) each 78.0 12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) each 112.0 12.33.6 Shoe (Plain) 12.33.6.1 75 mm Shoe (minimum wall thickness 1.8mm) each 69.0 12.33.6.2 110 mm Shoe (minimum wall thickness 2.2mm) each 99.0 192 12.34 12.34.1 75 mm (minimum wall thickness 1.8mm) each 97.0 12.34.2 110 mm (minimum wall thickness 2.2mm) each 114.0 hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in adirection perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.58.1 10mm thick plaster of Paris (gypsum anhydrous) sheet 10mm thick pop board. 12.58.1.1 Flat surfaces sqm 676.0 12.58.1.2 Curved surfaces sqm 748.0 12.58.1.3 Sunk or raised mouldings sqm 175.0 12.58.1.4 Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. sqm per meter height 59.0 12.58.2 12.5 mm thick tapered edge gypsum board 12.58.2.1 Plain board conforming to IS: 2095- Part I: 2011 (Board with BIS certification marks). sqm 750.0 12.58.2.2 Fire resistant Glass ReinforcedGypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) sqm 866.0 12.58.2.3 12.5mm thick moisture resistant gypsum plasterboards Moistbloc as per BS EN 520 confirming to water absorption class H1 with total water absorption < 5%, Green Pro certified by CII sqm 920.0 12.58.2.4 Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturersspecification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. sqm 1277.0 12.58.3 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured throughautoclaving process. sqm 1150.0 193 13.1 13.1.1 1:4 (1 cement : 4 sand) sqm 173.0 13.1.2 1:6 (1 cement : 6 sand) sqm 160.0 194 13.2 13.2.1 1:4 (1 cement : 4 sand) sqm 184.0 13.2.2 1:6 (1 cement : 6 sand) sqm 168.0 195 13.3 13.3.1 1:4 (1 cement : 4 sand) sqm 245.0 13.3.2 1:6 (1 cement : 6 sand) sqm 225.0 196 13.4 13.4.1 1:3 (1 cement : 3 sand) sqm 210.0 13.4.2 1:4 (1 cement : 4 sand) sqm 203.0 197 13.5 13.5.1 1:3 (1 cement : 3 sand) sqm 236.0 13.5.2 1:4 (1 cement : 4 sand) sqm 220.0 198 13.13 199 13.14 200 13.15 13.15.1 Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof sqm 34.0 13.15.2 Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof sqm 22.0 201 13.16 13.16.1 In one coat sqm 11.0 13.16.2 In two coats sqm 18.0 202 13.17 13.17.1 In one coat sqm 158.0 13.17.2 In two coats sqm 260.0 203 13.18 13.18.1 Spherical ceiling sqm 42.0 13.18.2 Groined ceiling sqm 47.0 13.18.3 Flewing soffits sqm 28.0 204 13.38 205 13.39 13.39.1 Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. sqm 130.0 13.39.2 Extra for making 12mm flute grove with 6 mm depth to prepare the surface even and smooth complete. metre 70.0 206 13.41 207 13.43 208 13.44 209 13.45 210 13.46 211 13.47 13.47.1 One coat. sqm 20.0 13.47.2 Two coats. sqm 32.0 212 13.48 13.48.1 One coat. sqm 37.0 13.48.2 Two coats. sqm 56.0 213 13.49 214 13.51 215 13.52 216 13.53 217 13.54 218 13.54.1 219 13.54.2 220 13.54.3 221 13.55 13.55.1 One coat sqm 63.0 13.55.2 Two coats sqm 101.0 222 13.64 223 13.65 224 13.66 13.66.1 One coat. sqm 35.0 13.66.2 Two coats. sqm 53.0 225 13.68 226 13.71 227 13.77 228 13.8 13.80.1 0.8-1.2mm thickness sqm 368.0 13.80.2 2.0-2.5mm thickness sqm 338.0 229 13.81 effective for 90 Days(03 Months) . 230 13.103 Note:- Applicable to item No. 13.1 to item No. 13.10 231 13.105 13.105.1 Standard pattern and design wallpaper Sqm 615.0 13.105.2 3D pattern and design wallpaper Sqm 750.0 13.105.3 Customize design wallpaper Sqm 1145.0 232 14.5 14.5.1 Float glass panes of thickness 4 mm sqm 679.0 14.5.2 Float glass panes of thickness 5.5 mm sqm 759.0 233 14.6 14.6.1 Float glass panes of thickness 4 mm sqm 801.0 14.6.2 Float glass panes of thickness 5.5 mm sqm 882.0 234 14.7 14.7.1 Float glass panes of thickness 4 mm sqm 697.0 14.7.2 Float glass panes of thickness 5.5 mm sqm 778.0 235 14.8 14.8.1 2nd class teak wood fillets meter 30.0 14.8.2 Haldu/Bija/Kail wood fillets. meter 26.0 236 14.11 237 14.24 238 14.27 239 14.28 240 14.29 241 14.31 242 14.36 243 14.37 244 14.38 245 14.39 246 14.48 247 14.49 14.49.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. sqm 42.0 14.49.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. sqm 30.0 248 14.51 14.51.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). sqm 87.0 14.51.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). sqm 52.0 249 14.52 14.52.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. sqm 65.0 14.52.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). sqm 41.0 250 14.53 14.53.1 One or more coats applied on walls @ 0.85 ltr/10 sqm. sqm 58.0 251 14.62 14.62.1 (one or more coats) sqm 9.0 14.62.2 (two or more coats) sqm 11.0 252 15.2 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). cum 578.0 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). cum 356.0 253 15.6 15.6.1 In lime mortar with old mughal bricks. cum 421.0 15.6.2 In lime mortar. cum 202.0 15.6.3 In cement mortar. cum 487.0 254 15.7 15.7.1 From brick work in lime mortar. 1000 nos 1254.0 15.7.2 From brick work in cement mortar. 1000 nos 1560.0 255 15.8 15.8.1 In lime mortar. cum 275.0 15.8.2 In cement mortar. cum 582.0 256 15.13 257 15.14 15.14.1 Of area 3 sq. metres and below. each 85.0 15.14.2 Of area beyond 3 sq. metres. each 117.0 258 15.15 15.15.1 Of area 3 sq. metres and below. each 33.0 15.15.2 Of area beyond 3 sq. metres. each 44.0 259 15.47 260 15.48 261 15.49 262 15.51 15.51.1 Rectangular manhole 90x80 cm and 45 cm deep each 611.0 15.51.2 Rectangular manhole 120x90 cm and 90 cm deep. each 1069.0 15.51.3 Rectangular arch type manhole 140x90cm and 2.45m deep. each 2023.0 15.51.4 Circular manhole 122 cm diameter and 1.68 m deep each 1553.0 263 15.52 15.52.1 Rectangular manhole 90x80 cm and beyond 45 cm depth. each 486.0 15.52.2 Rectangular manhole 120x90 cm and beyond 90 cm depth. each 579.0 15.52.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). each 468.0 15.52.4 Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). each 322.0 264 15.64 265 17.1 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. each 2995.0 266 17.2 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid. each 3036.0 17.2.2 W.C. pan with ISI marked black solid plastic seat and lid. each 3013.0 267 17.3 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. each 4613.0 17.3.2 W.C. pan with ISI marked black solid plastic seat and lid. each 4590.0 268 17.11 17.11.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. each 2187.0 17.11.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar tap. each 1938.0 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. each 1664.0 17.11.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. each 1775.0 269 17.12 270 17.14 17.14.1 Kitchen sink with drain board 17.14.1.1 510x1040 mm bowl depth 250mm. each 8074.0 17.14.1.2 510x1040 mm bowl depth 225mm. each 7609.0 17.14.1.3 510x1040 mm bowl depth 200mm. each 7493.0 17.14.1.4 510x1040 mm bowl depth 178mm. each 5286.0 17.14.2 Kitchen sink without drain board 17.14.2.1 610x510 mm bowl depth 200 mm. each 4583.0 17.14.2.2 610x460 mm bowl depth 200 mm. each 4351.0 17.14.2.3 470x420 mm bowl depth 178 mm. each 3422.0 271 17.22 17.22.1 White each 945.0 17.22.2 coloured each 1037.0 272 17.24 17.24.1 White each 456.0 17.24.2 Black each 433.0 17.24.3 Coloured (other than black and white) each 688.0 273 17.25 274 17.6 17.60.1 75 mm each 33.0 17.60.2 110 mm each 50.0 275 17.61 276 17.64 17.64.1 Semi rigid pipe 17.64.1.1 32 mm dia each 87.0 17.64.1.2 40 mm dia each 98.0 17.64.2 Flexible pipe (only in residential & complaxes) 17.64.2.1 32 mm dia each 87.0 17.64.2.2 40 mm dia each 98.0 277 17.65 278 17.67 279 17.67 17.68.1 Circular shape 450mm dia. each 806.0 17.68.2 Rectangular shape 453x357mm each 642.0 17.68.3 Oval shape 450x350mm (outer dimensions) each 697.0 17.68.4 Rectangular shape 1500x450 mm each 1311.0 280 17.69 281 17.7 17.70.1 C.P. brass each 340.0 17.70.2 Vitreous china each 324.0 282 17.74 283 17.75 284 17.76 285 18.6 18.6.1 Internal work - Exposed on wall 18.6.1.1 15 mm nominal outer dia .Pipes metre 129.0 18.6.1.2 20 mm nominal outer dia .Pipes metre 153.0 18.6.1.3 25 mm nominal outer dia .Pipes metre 177.0 18.6.1.4 32 mm nominal outer dia .Pipes metre 254.0 18.6.1.5 40 mm nominal outer dia .Pipes metre 354.0 18.6.1.6 50 mm nominal outer dia .Pipes metre 528.0 18.6.2 Concealed work including cutting chases and making good the walls etc. 18.6.2.1 15 mm nominal outer dia .Pipes metre 207.0 18.6.2.2 20 mm nominal outer dia .Pipes metre 234.0 18.6.2.3 25 mm nominal outer dia .Pipes metre 288.0 18.6.2.4 32 mm nominal outer dia .Pipes metre 360.0 286 18.7 External Work 18.7.1 15 mm nominal outer dia .Pipes metre 122.0 18.7.2 20 mm nominal outer dia .Pipes metre 141.0 18.7.3 25 mm nominal outer dia .Pipes metre 185.0 18.7.4 32 mm nominal outer dia .Pipes metre 238.0 18.7.5 40 mm nominal outer dia .Pipes metre 324.0 18.7.6 50 mm nominal outer dia .Pipes metre 498.0 18.7.7 62.50 mm nominal inner dia .Pipes. metre 1429.0 18.7.8 75 mm nominal inner dia .Pipes. metre 2018.0 18.7.9 100mm nominal inner dia .Pipes. metre 2791.0 18.7.10 150 mm nominal inner dia .Pipes. metre 3358.0 287 18.13 18.13.1 25 mm nominal bore each 428.0 18.13.2 32 mm nominal bore. each 500.0 18.13.3 40 mm nominal bore each 584.0 18.13.4 50 mm nominal bore each 749.0 288 18.14 18.14.1 15 mm nominal bore each 316.0 18.14.2 20 mm nominal bore each 431.0 18.14.3 25 mm nominal bore each 499.0 289 18.17 18.17.1 30 cm length 18.17.1.1 15 mm nominal bore each 88.0 18.17.1.2 20 mm nominal bore each 129.0 18.17.2 45 cm length 18.17.2.1 15 mm nominal bore each 149.0 18.17.2.2 20 mm nominal bore each 184.0 290 18.18 18.18.1 With common burnt clay bricks of 25 kg /sqcm compressive strength. each 916.0 18.18.2 With well burnt flyash bricks of 50 kg/sqm compressive strength. each 870.0 291 18.28 292 18.29 18.29.1 15 mm nominal bore each 306.0 18.29.2 20 mm nominal bore each 338.0 293 18.3 18.30.1 15 mm nominal bore each 318.0 18.30.2 20 mm nominal bore each 344.0 294 18.31 295 18.32 296 18.33 297 18.34 298 18.35 299 18.36 300 18.37 301 18.38 302 18.39 303 18.41 304 18.42 305 18.43 18.43.1 100 mm diameter each 806.0 18.43.2 150 mm diameter each 922.0 18.43.3 200 mm diameter each 1336.0 306 18.64 307 18.65 308 18.67 309 18.68 18.68.1 300 mm long each 450.0 18.68.2 600 mm long each 650.0 310 19.4 19.4.1 110 mm diameter OD (min. wall thickness 3.2mm) metre 234.0 19.4.2 160 mm diameter OD (min. wall thickness 4.0 mm) metre 477.0 19.4.3 200 mm diameter OD (min. wall thickness 4.9 mm) metre 751.0 19.4.4 250 mm diameter OD (min. wall thickness 6.2mm) metre 972.0 19.4.5 300 mm diameter OD (min. wall thickness 7.7mm) metre 1232.0 311 19.5 19.5.1 110 mm diameter PVC. pipe metre 576.0 19.5.2 160 mm diameter PVC. pipe metre 704.0 19.5.3 200 mm diameter PVC. pipe metre 821.0 19.5.4 250 mm diameter PVC. pipe metre 949.0 19.5.5 300 mm diameter PVC pipe metre 1078.0 312 19.6 19.6.1 110 mm diameter PVC. pipe metre 274.0 19.6.2 160 mm diameter PVC. pipe metre 444.0 19.6.3 200 mm diameter PVC. pipe metre 521.0 19.6.4 250 mm diameter PVC. Pipe metre 607.0 19.6.5 300 mm diameter PVC pipe metre 700.0 313 19.7 19.7.1 100x100 mm size P type 19.7.1.1 With well burnt bricks each 1764.0 19.7.1.2 With Sewer bricks conforming to IS : 4885 each 1668.0 19.7.2 150 x 100 mm size P type. 19.7.2.1 With well burnt bricks each 1803.0 19.7.2.2 With sewer bricks conforming to IS : 4885 each 1707.0 19.7.3 180x150 mm size P type 19.7.3.1 With well burnt bricks each 1913.0 19.7.3.2 With Sewer bricks conforming to IS : 4885 each 1818.0 314 19.9 19.9.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be notless than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 19.9.1.1 With well burnt bricks each 7997.0 19.9.1.2 With Sewer bricks conforming to IS : 4885 each 7747.0 19.9.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight offrame 58 kg) : 19.9.2.1 With well burnt bricks each 18086.0 19.9.2.2 With Sewer bricks conforming to IS : 4885 each 17402.0 19.9.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) 19.9.3.1 With well burnt bricks each 21816.0 19.9.3.2 With Sewer bricks conforming to IS : 4885 each 21228.0 315 19.1 19.10.1 Size 90x80 cm 19.10.1.1 With well burnt bricks metre 6176.0 19.10.1.2 With Sewer bricks conforming to IS : 4885 metre 5448.0 19.10.2 Size 120x90 cm 19.10.2.1 With well burnt bricks metre 7380.0 19.10.2.2 With Sewer bricks conforming to IS : 4885 metre 6512.0 316 19.12 19.12.1 With well burnt bricks metre 5257.0 19.12.2 With Sewer bricks conforming IS : 4885 metre 4648.0 317 21.1 21.1.1 For fixed portion. 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) kg 378.0 21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 416.0 21.1.1.3 Polyester powder coated aluminium (minimum thicknessof polyester powder coating 50 micron) kg 426.0 21.1.2 For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings whereverrequired including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) kg 446.0 21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 484.0 21.1.2.3 Polyester powder coated aluminium (minimum thicknessof polyester powder coating 50 micron) kg 494.0 21.1.3 Deduct for not providing EDPM rubber/neoprene gasket all around. kg 80.0 318 21.2 21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. sqm 802.0 21.2.2 Pre-laminated particle board with decorative lamination on both sides. sqm 907.0 319 21.3 21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) sqm 774.0 21.3.2 With float glass panes of 5.0 mm thickness (weight not less than sqm 948.0 12.50 kg/sqm ) 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm ). sqm 1182.0 320 21.5 21.5.1 With stainless steel cover plate - minimum 1.25 mm thickness each 1890.0 21.5.2 With brass cover plate - minimum 1.25 mm thickness. each 2072.0 321 21.16 21.16.1 Anodized (AC15 ) aluminium each 62.0 21.16.2 Powder coated minimum thickness 50 micron aluminium each 65.0 21.16.3 Polyester powder coated minimum thickness 50 micron aluminium. each 69.0 322 21.17 323 21.18 324 21.19 325 21.21 326 21.22 327 21.23 328 21.24 329 21.32 330 22.6 a) After surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) Laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. 331 22.14 22.14.1 Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) cum 6569.0 22.14.2 Cement mortar 1:3 (1 cement : 3 sand) cum 9308.0 22.14.3 Cement mortar 1:4 (1cement : 4 sand) cum 8437.0 332 25.1 25.1.1 White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440X575X250mm With integral foot rests. (Premium Range) each 4726.0 25.1.2 White Vitreous china Anti germ Fluoro-Polymer coated Orissa pattern W. C. pan of size 410X515X255 mm with integral foot rests.(Premium Range) each 4392.0 333 25.2 25.2.1 Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. pan Size 360X545X395 with solid poly propelyne made soft closing seat cover (Premium Range) each 9788.0 25.2.2 Anti-germ Fluoro-Polymer Coated Water Closet European type W. C. pan size 360X475X395 mm with solid poly propelyne made soft closing seat cover (Premium Range) each 8742.0 334 25.3 25.3.1 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet Size 380X520X375 mm with solid poly propelyne made soft closing seat cover (Premium Range) each 26412.0 25.3.2 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 390X570X365 mm with solid poly propelyne made, soft closing seat cover (Premium Range) each 23559.0 25.3.3 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500 x 330mm with solid poly propelyne made, soft closing seat cover (Premium Range) each 21099.0 25.3.4 Anti germ Fluoro-Polymer Coated (Nano coating) Wall hung water closet size 360 x 500 x 330mm or greater size with solid poly propelyne made, soft closing seat cover (Premium Range) each 18838.0 335 25.4 25.4.1 Anti germ Fluoro-Polymer Coated couple water closet Size 420X710X810mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 28103.0 25.4.2 Anti germ Fluoro-Polymer Coated couple water closet Size 380X610X805mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 19275.0 25.4.3 Anti germ Fluoro-Polymer Coated couple water closet Size 370 x 640 x 760mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 18952.0 25.4.4 Anti germ Fluoro-Polymer Coated couple water closet Size 375X650X800 mm with solid poly propelyne made soft closing seat cover. (Premium Range) each 18023.0 336 25.5 25.5.1 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370X695X795mm with solid poly propelyne made soft closing seat cover.(Premium Range) Each 34317.0 25.5.2 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370X695X795mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 25954.0 25.5.3 Anti germ Fluoro-Polymer Coated Single PieceW.C. Pan Size 385X720X710mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 22237.0 25.5.4 Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 370X695X795mm with solid poly propelyne made soft closing seat cover.(Premium Range) each 19450.0 337 25.6 25.6.1 Anti germ Fluoro-Polymer Coated extended wall hung type couple closet Size 380X650X730mm with solid poly propelyne made soft closing seat cover (Premium Range) each 13365.0 25.6.2 Providing and fixing white vitreous china made Anti germ fluoro-polymer coated extended wall hung type couple closet Size 375X360X750mm along with dual flushing cistern flushing capacity 3 & 6 litre. (Premium Range) each 10670.0 338 25.7 25.7.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595X435X185 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) each 16581.0 339 25.8 25.8.1 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570x415x200mm with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system with square wall flance & spout complete (decol technology). (Premium Range) each 14543.0 25.8.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570X820X195mm with 15 mm C. P. Table Top pressmatic Pillar cock auto closing system (decol technology). (Premium Range) each 13614.0 340 25.9 25.9.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 615x415x150mm with wall mounted single lever concealed basin mixture (cartridge size 32mm.) (Premium Range) each 15591.0 25.9.2 Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 600x400x185mm with 15 mm C. P. wall mounted single lever concealed basin mixture. (Premium Range) each 14940.0 341 25.1 25.10.1 White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 595x435x185mm with Table mounted single lever Tall boy basin mixture, (cartridge size 32mm.) (Premium Range) each 18585.0 25.10.2 White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) each 16785.0 342 25.11 25.11.1 White Vitreous China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm. (Premium Range) each 14544.0 25.11.2 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal size 475X315X715 mm top inlet with fixing accessories (Inbuilt spreaders, Inbuilt Bottle trape and inbuilt ceramic Waste coupling) with 15mm Brass made Pressmatic auto closing open urinal flush valve with wall flange (Decol technology, 400000 operation warranted) complete including painting of fittings and brakets, cutting and making good the wall and floors wherever required : each 13336.0 25.11.3 Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated urinal back inlet with fixing accessories (Inbuilt spreaders, Inbuilt Bottle trape and inbuilt ceramic Waste coupling) Size 385X325X635 mm with Concealed sensotronic flushing valve for urinal complete set with installation box with control cock complete including painting of fittings and brakets, cutting and making good the wall and floors wherever required : URS-WHT-13253N & PRS-CHR-073 each 10641.0 343 25.12 25.12.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 340x325x650 mm with sensotronic concealed type flushing valve battery & electrical oprated type (9V transformer) for urinal complete set with installation box with control cock. (Premium Range) each 23927.0 25.12.2 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal size 385x325x635 mm with concealed sensotronic flushing valve for urinal complete set with installation box, (Premium Range) each 20025.0 344 25.13 25.13.1 White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480 X 300X740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) each 18491.0 345 25.14 346 25.14.1 25.14.2 Providing and fixing white vitreous china flat back Anti germ fluoro-polymer coated Urinal size 475x315x715 mm (Inbuilt spreaders, bottle trap and ceramic waste coupling) with inbuilt sensor battery & electrical oprated type (9V transformer) for flushing. (Premium Range) each 22998.0 347 25.15 348 25.16 349 25.17 350 25.18 351 25.19 352 25.21 353 25.22 354 25.23 355 25.24 356 25.25 357 25.26 358 25.27 359 25.28 360 25.29 361 25.31 362 25.32 363 25.33 364 25.34 365 25.35 366 25.36 367 25.37 368 25.38 369 25.39 370 25.41 371 25.42 372 25.43 373 25.44 374 25.45 375 25.46 376 25.47 377 25.48 378 25.49 379 25.51 380 25.52 381 25.53 382 25.54 383 25.55 384 25.56 385 25.57 386 25.58 387 25.59 388 25.61 389 25.62 390 25.63 vitreous china type Anti germ fluoro-polymer coated wall mounted wash basin with C.I. brackets, C. P. brass single lever basin mixer, 15mm quarter turn angular stop cock, 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required, all fittings and fixtures etc. complete . (Premium Range) 25.63.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) each 14729.0 25.63.2 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 570x470x190 mm. (Premium Range) each 15100.0 25.63.3 white Vetrious china Anti germ fluoro-polymer coated wall hung intergrated wash basin size 495x400x365 mm. (Premium Range) each 18490.0 391 25.64 25.64.1 white Vetrious china Anti germ fluoro-polymer coated wall mounted wash basin size 620x480x185 mm. (Premium Range) each 10617.0 Note- Schedule of items includes all the items required for maintainance of buildings regarding A/R, S/R MOW, Deposit & Other Works as per SCHEDULE OF RATES FOR BUILDING WORKS inforce from 01/01/2024, issued by Project Director, Public Works Department (PIU) M.P. Bhopal. Sub Engineer Sub Divisional OfficerSurvey Sub Division.P.W.D. Bhopal Executive EngineerMaintanance Division No.2P.W.D. Bhopal
Contract Date: Apr 23, 2026 Contract Value : 21.93 Lakh
Government Departments No of Bidders 5
Madhya Pradesh View Result →
43.
Public Administrative Department #11300262 AOC
Tender For Annual Plan-ANICKAD GP- Wiring of ICDS Office-General Electrical Work - Wiring 2 90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point 3 90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point 4 90.2.1.4:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point 5 90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points 6 OD456938/2024-2025:Supply and fixing angle /straight-lined skirt type brass batten/ angle holder with 200 mm plastic shade with 7/9W LED Bulband giving connection as required 7 OD456944/2024-2025:Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated, heat resistant prismatic glass cover with 9 W LED to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor fle x wire conforming to relevant ISS or extending the original wiring and making good the surface as required.(Mepro /Philips/Crompton/Bajaj make) 8 90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thicknesscomplete with all accessories andlamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture 9 90.3.22.3:Supply & installation of light fittings on flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA sheet of .5mm thickness complete with all accessories andlamps etc. directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture 10 90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps 11 90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 12 90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. 13 OD456940/2024-2025:Supply Conveyance, installation, testing, and commissioning of 150mm medium duty 2300 rpm 4leaf, exhaust fan in the plastic body (Almonard/ Crompton make) in the existing opening. fixing necessary bolt and nuts, making good the damages, etc. as required including giving connections with required length of 24/20mm 3core round copper conductor flexible chord etc as required 14 90.4.2:Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required. 15 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply 16 1.48:Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) 17 90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm 18 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm 19 1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm 20 1.17.4:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 1.5 sq. mm 21 1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm 22 1.17.13:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 2.5 sq. mm 23 1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm 24 1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm 25 1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm 26 1.53.1:Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable 27 1.53.2:Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required2 run of Cable 28 1.53.3:Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required3 run of Cable 29 OD457140/2024-2025:Supply and laying 1.5 m CAT-6 Patch Cord. Preferred make:-D link or equivalent 30 OD457141/2024-2025:Supply and installation of 16/24 Port 10/100 /1000 Mbps rack mountable switch Make: tp -link TL-SG 1016 D—7200 31 OD457142/2024-2025:Supply and fixing 2 module moulded plastic box/metal box on surface/recess, fixing moduler face plate with RJ 45 CAT 6 jack(Legrand/AMP/MK) 32 OD457143/2024-2025:Testing of each and every node point and making permanent labeling at the I/O box and on the patch panel. 33 OD457144/2024-2025:Supply and fixing of 19, 6U, 500 MM Depth Wall Mount Rack with Front Glass door, cooling fan 90cm ,NVRS, 1 No Power Distribution Unit Rack mounting type - 1 no, Cable Organizer /1U/Loop - 1No.(Netrack or equilent make) 34 OD457145/2024-2025:Supply and installation of CAT-6 24 Port Enhanced Modular type Patch Panel for interconnecting servers and clients including termination charges. Preferred Model:- D-Link or equivalent 35 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) 36 1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) 37 1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) 38 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 39 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch 40 1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 41 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet 42 2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door 43 90.11.1.10:Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) 44 2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 45 2.10.4:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole 46 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 47 2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 48 2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 49 2.15.1:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 50 90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG) 51 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) 52 90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) 53 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) 54 OD456945/2024-2025:Supply and providing 12x3 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 55 OD456943/2024-2025:Supply and providing 25x6 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 56 OD457126/2024-2025:Charges for preparing drawing of the complete Electrical installation after completion of the present work and preparing completion report with KSEB service connection application form and submitting to the consumer for availing 3 phase service connection/Load regularization
Contract Date: Jun 16, 2026 Contract Value : 1.63 Lakh
Government Departments No of Bidders 2
44.
Housing Urban and Rular Development #11294593 Technical Bid
Tender for (I) Designing, P And F, Commissioning And Testing Of Vacuum- Operated Automatic Switchover Gas Chlorination System With 1 Working Chlorinator Plus 1 Standby Chlorinator Compatible With The Existing Gas Chlorination System With Three Months Trial Run And One Year Defect Liability Period. (Ii) Designing, P And F, Commissioning And Testing Of Chlorine Gas Dry Scrubber Consisting Of Support Structures, Ductwork Of Scrubber, Blower, Dry Scrubbing Tank, Dry Scrubbing Media, Necessary Piping, Motors, Controls, Exhaust Stack And Essential Accessories With Three Months Trial Run And One Year Defect Liability Period. Pandf Of Prefab Porta Cabin Of Size 1.83 M. X 1.83 M. And Height 2.3 M. With One Side Slope Design With 50 Mm Puf Wall Panels With Pre Painted Galvanized Sheet And 20/60 Mm Corrugated Puf Roof Panels With Pre Painted Galvanized Sheet With Door, Windows Etc. Complete In All Respect. (Iii) Designing, Pand F, Commissioning And Testing Of Auto-Shut Off Valve With Three Months Trial Run And One Year Defect Liability Period. (Iv) P And F Of Dual Gas Cylinder Duly Certified And Approved By Bis And By Explosive Department Of Govt. Of India, Nagpur Of 100 Kg Capacity Cylinder As Per Is 3196 Part -Iv. (V) Providing, Fixing, Installation, Commissioning And Testing Of Chlorine Leak Detector With Alarm/Hooter. (As Per Technical Specifications Of Gaseous Chlorination System As Per Letter Of Eic, Phed, Pkl. Memo No. 23070-23142-Phe/Mont. Dated 28/02/2024 (Copy Attached). , Ht Metering Panel: Supply Indoor Type 11Kv Vcb Control Cubical Panel With Vertical Isolation Type Breaker As Per Relevant Is As Amended Up To Date And Additional Specifications, Having Capacities As Mentioned Below, Single Break Trip Free Mechanism, Manually Charged And Auto/Manually Closing Breaker Suitable For Use On 11Kv, 3 Phase 50Hz Ac, Supply With Short Circuit Fault Level Of 500 Amps Capacity, Breaker Featured With Local On/Off Indicator With Hand Trip Device, Spring Release Coil, Shunt Trip Coil And Auxiliary Switch Of 2No Plus 2Nc And Equipped With Following Switchgears And Accessories Including Making Suitable Structure Arrangement For Installation, Control Wiring And Connections Etc. As Reqd. (1 Ic Plus 2 Og) A). Vcb, 11Kv, 630Amp, 50Ka. B). 1Ph 11Kv/110 Volts Pt (Indoor Type) Class 0.2 Accuracy And 100 Va Burden -3 NoS. C). 33Kv Indoor Dead Type Dual Core Dual Ratio 3Cts Of Ratio 200-100/5-5 A Of 15 Va Burden, Ps 5 P10 And Accuracy Class 0.2. D). Control Panel- Cubicle Type Control Panel Suitable For Floor Mounting Made Out Of 1.63 Mm Cr Sheet Duly Powder Coated And With Following Relays. E). Microprocessor Based Numerical Relay For O/L, E/F And Sc Protection Suitable For Above. F). Master Trip Relay -2 NoS. G). Indicator Type Annunciator Panel With Buzzer. H). Digital Volt Meter- 0-11 Kv. I). Digital annual periodical maintenance Meter- 0-100 Amp. J). Ryb/ Trip/Closing/Spring Charged Indicator Lamp. K). Fault Annunciator Panel For O/L, Wti, Oti And Buchhloz Relay Alarm And Trip Auxiliary Relay. L). Tnc Switch For Operation. M). Multifunction Meter Em6400ng. N). Tcs Relay For Safe , Providing, Fixing, Lointing, Testing Of Mechanical Joints Complete With Rubber Gaskit, Galvanized Nuts And Bolts Including Labor, Tranportaion Ets Up To The Site. 300 Mm Nominal Diameter , Copper Cable: Supply, Erection, Testing And Commissioning Of Is Marked 3 Core Copper Cables, Solid Copper Conductor Up To 6Sqmm And Balance Stranded Copper, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Glavanised Wire For Cables Up To 10X1.5Sqmm, 8X2.5Sqmm, 2X10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip), Extruded Pvc Type St2 Outer Sheathed, /1100 V Grade As Per Is 7098 (Part 1) 1988 With Up To Date Amendments Along With All Accessories Like Thimble Lugs Etc For Motors As Per Entire Satisfaction Of Engineer-In Charge Complete In All Respect. Make:Finolex / Havells / repair renovation Cables. (150 Sqmm Size) , Ns Item -Lt Cable Alluminium: Supply, Erection, Testing And Commissioning Of Is Marked 3.5 Core Cables, Solid Aluminum Conductor Up To 10Sqmm And Balance Stranded Conductor, Xlpe Insulated, Cores Laid Up, Pvc Inner Sheathed, Armoured (Aluminium Wire For Single Core Up To 70Sqmm And Balance Aluminium Strip, Glavanised Wire For Cables Up To2x10sqmm, 3X10sqmm, 4X6sqmm And Balance All Galvanized Steel Strip) Extruded Pvc Type St2 Outer Sheathed, 650/1100V Grade As Per Is7098 (Part-1) 1988 With Up To Date Amendments Along With All Accessories Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (300 Sqmm Size). , Cloud Based Software Comprising Of Middleware, Database And Front-End Web Interface Through Suitable Dashboards, Aggregation Screens And Gis Assisted Drill-Down From Macro To Micro To Be Provided. Application Data Hosting And Maintenance For Five Years Included In Scope. Cloud Servicesof Ministry Of Electronics And Information Technology (Meity), Government Of India Empaneled Cloud Service Providers Shall Be Taken Like Microsoft, Amazon, Google, Bsnl Etc. Cloud Service Provider Must Adhere The Security Standards And Guidelines Issued By Meity From Time-To-Time. As The Data Belongs To The State Government Of Haryana, Therefore The Application And Data Hosted On Cloud Must Be Kept And Stored In Data Centres Located In India Only. Any Change In Application Requirement Or Infrastructure Shall Be Borne By The Implementation Agency. Implementation Agency Shall Carry Out The Application Security Audit From A Certified Auditor (Ca). Application And Data Shall Be Kept Confidential And Only The Authorized Users Shall Have The Access To It. Implementation Agency Shall Be Responsible For Any Data Theft Or Data Leakages. , Ns Item -Online Chlorine Sensor : Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Online Chlorine Sensor. (For Mbs) , Ns Item -Rtu: Functional Integration At Rtu-Cum-Gateway For Motorized Control Valve In Pump Control Panel (For Mbs) , Ns Item -Electromagnetic Flowmeter: Supply, Installation, Testing, Commissioning Five Year Maintenance, Electromagnetic Flowmeter Along With Its Installation Complete In All Respect As Per Specifications. Size As Per Site Requirement.(Ip-68), Rs-485 Modbus. Line Size 400 Mm, Installed At Pump End / Source. (For Mbs) , Ns Item -Automation Panel: Automation Panel For Integration With Vfd With Pump Control Panel, Along With Auto/Manual Selection Switch As Well As On/Off Push Button To Be Provided. Manual Selection Between Pump 1 And Pump 2 Depending On Which To Be Operated And Which To Be Stand By To Be Provided, Along With All Relay Interlocks And Provision Of Operation Of Pumps Through Potential Free/Open Collector Digital Outputs Of Rtu-Cum-Gateway Device. The Panel Will Contain Rtu-Cum-Gateway With Necessary I/Os And Edge Controller Motorized Control Valve In Local / Remote Or Auto/ Manual Modes Of Operation In Tandem With Cloud Scheduler Or Level Sensor-Based Functions. Panel Will Contain Smps With Rechargeable Battery Backup (Min. 24 Hrs.) Along With Facility To Connect All Field Instruments With 24 Vdc Power Supply. (For Mbs , Ns Item -Radar And Water Level Transmitter: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Radar And Water Level Transmitter Alongwith According To Water Level In Ohsr (For Ohsr) Ingress Protection - Ip 66, Measuring Range - Up To 20 M, Process Temp.- -40 To 60 Deg. C, Full Pvdf Body - For A Long Sensor Lifetime. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order. (For Mbs) , Ns Item -Sim Card: Sim Cards For Five Year Maintenance Of All The Instrument Above As Required. ( For Mbs) , Ns Item -Butterfly Valve: Supply, Installation, Testing, Commissioning With Five Year Maintenance Of Butterfly Valve With Electrical Actuator Body Material - Ci/Dipressure Rating - Pn16 Feedback - 100% Open And 100% Close. **Unit Rate Given, Actual Quantity To Be Ascertained While Placing Order 400 Mm , Ns Item - Ht. Alluminium Cable: Supply Erection Testing Of Standard Make Xlpe 3 Core Ht / 11 Kv Grade Isi Marked Stranded Compact Circular Aluminium Conductor, Conductor Screen With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screening With Extruded Semi Conducting Compound In Combination With Copper Tape, Cores Laid Up, Innersheath Of Pvc, Galvanised Steel Flat Strip Armoured, And Overall Pvc Sheathed Cable Conforming To Is 7098 (Part-2) 2011 With Up To Date Amendments For Making Following Connection A) From G.O Switch To Metering Equipment . B) From Metering Equipment To Transformer Complete In All Respect. Make: Finolex / Havells / repair renovation Cables. (35 Sqmm Size) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 160 Kva (As Per Parameters Of Cpcb 4) 160 Kva (As Per Parameters Of Cpcb 4) , Designing, Supply And Erection Of Dg Set Of Capacity Given Below With Noise Controlled Devices Acoustic Of Suitable Rating, Testing And Commissioning Of Diesel Generating Set, Radiator Cooled, 3 Phase, 4 Wire, 50 Cycles 415 Plus (-)1% Volts Ac Alternator Coupled Directly Through S Set Of Flexible Coupling On A Common Ms Fabricated Base Frame With Diesel Engine Complete With Suitable Size Incoming Cable From Generator To Change Over/Amf Panel, Making 2Nd Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Standers Panel, Making Second Incoming Cable Connection From Transformer, Outgoing Cable Connection From Changeover/ Std Panel To Incomer Of Motor Starter Panel, Fenced Enclosure With Platform For Dg Sets Complete As Per Following Detailed Scope And Specification And Directions Of Engineer-In-Charge. The Rating Should Be At 1500 Rpm. A) Diesel Engine B) Alternator C C) Battery 24 V. D) Base Plate. E) Suitable Sq Mm Suitable Core Copper Cable Upto 40 Meters. F) Tools, Standard Panel. G) Metering, Set 415 Vac-1 Set (Amp. Meter, Volt Meter, Ass, Vss, Phase Indicator, Control Fuse, Frequency Meter, CtS) H) Metering Set 60/5A//440V (Amp. Meter, Volt Meter). I) Overload Protection For Dc-1 No. J) Battery Charger 24V Dc K) Copper Bus Bar Of Suitable Size L) Kwh Meter 96 Sq Mm Size M) Starting Fuse Button And Key Switch9on/Off N) Indicating Lamps For Low Lubricated Oil Pressure, High Coolant Temperature, Set Running, Load On, Dc Control And Other Required Accessories Complete In All Respects To The Satisfaction Of Engineer-In-Charge 7. 200 Kva (As Per Parameters Of Cpcb 4) 200 Kva (As Per Parameters Of Cpcb 4) , Supplying, Erection, Testing And Commissioning Of Horizontal Centrifugal Clear Water Pumping Set Capacity 2780 Lpm X 50 M Head, 45 Bhp Motor, Complete With Installation At Mbs Near Yamuna River. , Design, Supply, Installation And Testing Of Vfd Along With Distribution Panel In Enclosure For Motor Rating Of 45 Hp. Enclosure Shall Be Ip54. The Panel Shall Be Equipped With Mccb Tp With Suitable Rating, Spreader Link Tp, Extended Rotary Handle, Volt Meter Digital, Volt Selector Switch, annual periodical maintenance Meter, annual periodical maintenance Selector Switch, C.T With Suitable Rating, Control Mcb Sp With Suitable Rating, Pla Relay, Pushbutton Red Plus Green With Element, Indicator On/Off, Aluminium Bus Bar/Suitable Rating Power And Control Wiring Labour And Margin, Fabrication With Minimum Sheet Thickness Of 2 Mm For Load Bearing And Non-Load Bearing Side. Vfd Should Be Capable Of Protecting Motor From High And Low Voltage And Earth Fault As Well. Vfd Should Restrict Harmonics Up To 35% Vfd Should Be Capable Of Providing Starting Torque Up To 200% While Starting Motor. It Should Have Class 3C3 (Avg)Conformal Coating So That Components Are Safe From Dust And Moisture. Communication -Built-In Rs485 Modbus Rtu, Ambient Temperature -Heavy Duty: -10 ~ 50 Deg C Normal Duty: -10 ~ 40 Deg C, Pcb Protection Conformal Coating Complying To Iec 60721-3-3 Class 3C3, Application Humidity Below Relative Humidity 95% Rh (No Condensation) Altitude 0 To 1,000 M Without Deration 1,001 To 4,000 M With Deration Of 1% Per Rise In 100 M, Vibration Up To 9.8 M/Sec2 (1.0 G), Global Compliance Ce, Ul, Rohs, Control Method V/F Control, Sensorless Vector Control, Slip Compensation, Closed Loop Vector Control. Starting Torque 200% At 0.5Hz In Sensorless Vector Control And 150% At 3Hz In V/F, Frequency Control Range 0 To 400Hz In V/F, 0 To 300Hz In Sensorless 1, 0 To 120Hz In Sensorless 2 / Vector, Frequency Precision Setting- Digital: 0.01Hz, Analog: 0.03Hz (60Hz Base). Complete With All Other Accessories As Required. (At Mbs Near Yamuna River) , Design, Construction, Erection And Commissioning Of 2 No. Ranneywell 1 At Machhrola And 1 At Jajjal (Radial Collector Well) Of 10.00 Mld Capacity With Minimum Sinking Depth Of 32 Mtr And 1000 Mtr Long Laterals Pipe In 4 Layers, All Civil, Mechanical And Electrical Works Including Transformer As Per Design Along With All Accessories And Cables, Cubicai Type Lt/Ht Panels, Vcb Panels, All Types Of Cablings With Cable Tray, Chemical Earthings Of All Machineries, 4 Vt Pumps (3W Plus 1S) Having Capacity 180.00 M³/Hr. X 30 M Head, Vfd Panels, M.S Header With All Necessary Fittings, Gantry As Per Design, Electromagnetic Flow Meters At All Outlets And Inlets, Field Office (4 Mtr X 4 Mtr With Attach Toilet), Horticulture And Landscaping (3000 Sqm) Including Purchase Of 2.50 Acre Land (For Ranneywell, Mbs And Approach Path From Revenue Rasta To Well), Earth Filling In Ranneywell Complex. 1 High Mast Street Light 12.5 Mtr High Pole With 8 Luminous Lights, Wire / Cable, Switch. Mcb And Proper Foundation Etc Complete In All Respect. 10 Cp Plus Cctv Hd Coloured Night Vision Cameras And 1 360 Degree Dome Camera Fitted At 11 M. High Pole Along With Proper Foundation With Hd Night Vision. Plc/Scada Based Automation And Monitoring System. All The Pumping Machinery, Panel Board, Flow Meter, Level Sensor Etc Shall Be Controlled By Plc And Scada And Shall Be Synchronized With Plc Panels At Ranneywell And Mbs Site Through Broadband Internet Facility. The Work Will Be Carried Out Strictly As Per Detailed Scope Of Works, Specifications, Conditions Mentioned In The Dnit And Entire Satisfaction Of Engineer-In-Charge. (80 % Capital Cost Plus 20 % O/M Cost Payement Schedule Attached With Dnit.) , Hsr Itmes
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 10
Jammu And Kashmir View Result →
48.
Housing Urban and Rular Development #11286216 AOC
Tender For Construction Of New Primary Health Center (Phc New Bldg) At Perumalmalai H/O Adukkam, Kodaikanal Block.; 2 Clearing lightjungle vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 3 Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. 4 Supplying and filling in foundations and basement with fillingM sand in layers not exceeding 15 cm. thick, well watered ,rammed and consolidated etc. complete complying with standard specifications. 5 Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement. 6 Refilling the approved good quality earth in plinths, area development etc. wherever specified in layers is not exceeding 200 mm thick, with available earth at site. 7 Supplying and filling of good earth filling locally available earth transported from the outside including consolidation,leveling specifiedin layers of not exceeding 200 mm thick., etc. complete. 8 Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid). 9 Upto Basement 10 Ground Floor 11 First Floor 12 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement ratio with plasticizer using 20mm and down concrete structural elements under controlled water graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the depart- mental officers comple.-1m3 13 Foundation & Basement 14 Ground Floor 15 First Floor 16 Steel - Fe 500D : Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers. 17 Brick work in following Cement Mortar 1:5 using best quality Country bricks of size 83/4 x 41/4 X2 3/4 for foundation and basement including curing etc., complete complying with standard specification. Including scaffolding curing cost of reinforcement etc. all complete as per specifications and drawings as directed by the Engineer in-charge. 18 Foundation basement 19 Ground floor 20 First floor 21 Brick partition walls of 11.50cm thickness using best quality Country bricks of size 83/4 x 41/4 X2 3/4in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately). 22 Ground Floor 23 First Floor 24 PLASTERING WORK 25 Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing.The Surface shall then be allowed to dry for atleast 48 hours.It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface.Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete].The Putty shoule be got approved by the Executive Engineer before use on work. 26 Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and ThreeM.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers 27 Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface,chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent andas directed. 28 FLOORING AND DADOOING 29 Paving the floor with best quality Vitrified Tiles of size 600 x 600 x 8mm of approved color, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same color pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works).Basic Cost-Rs.776/sq.m 30 Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works).Basic cost-Rs.464/sq.m 31 Dadooing the walls with colouredDadooing Ceramic tiles of size 150mm x 150mm x 6mm approved size , quality and colour set in CM 1 : 2 - 10 mm thk. And pointed with suitable cement including finishing the joint and pointing flesh with walls and tile surfacein all floors at the rate of 0.40 Kg /Sqm etc. complete. 32 Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works). 33 Providing, fabricating and fixing M.S. grillsWindows,and ventilator, gates, ladders, rail pipes, nosing angles, with M.S.lugs in staircase steps etc., made out of M.S rods, flats, angles, pipes, channels etc. including necessary fixtures complete as per drawings and specifications and as directed by the Engineer. 34 S.S Handrail 35 Manufacturing,supplying and fixing of stainless steel handrails for staircase using 50mm dia 304L grade stainless steel pipe of 1.6mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1mm thick as vertical at 900mm centre with 2 Nos of 25mm dia intermediate horizontal stainless steel pipe of 1.6mm thick in between.The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete.The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance,electrical charges,ect.complete. 36 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete 37 Supply and Fabrication of UPVC doorincluding cost and conveyance of all charges etc complete. 38 Solid PVC door shutters Toilet door using 19 Gauge 19mm MS square tubes for styles and outer frames.15mm MS square tubes for top, lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets.Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings.The over all size of styles shall be 50mm x 30mm.The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. 39 UPVC Windowsupplying and fixing UPVC ( Un-PLASTICIZED Polyvinyl chloride) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with g/1mm 125GSMand 100% corrosion free, the profiles are multi chambered sectionwith wall thick of 2mm. The EPDM rubber (black color) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power points locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed or plainglass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and shouldhave key lockable action, security protective hinges, strong lockingsystems and as per sizefor arrestingnoise and energy loss. 40 UPVC VENTILATOR: Supplying and fixing UPVC ( Un-PLASTICIZED Polyvinyl chloride)Louvered Ventilators of from the profile the size of outer frame 60x58mm and shutter profile the size of 60x78mm both profile size of 60x78mm both profiles are reinforced with GI/1MM 125GSMand 100% corrosion free , the profile are multi chambered sections withwall thick of 2mm. The EPDM rubber (black color) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiation pin headed glass 4mm thick should be fixed to the wall with 100% packing with screws and silicon packing all around the frame. The ventilator should be got approved from the Executive Engineer before use on work. 41 PAINTING WORK 42 Painting two coats of synthetic Enamel paint of approved colour and make over one coat of anti corrosive Zinchromite primerover new wood / steel work, suitably prepared for receiving the paint by surface scraping, rubbing applying filler etc. including cost of filler, primer, paint all complete as per drawings and specifications. 43 Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the wallssmooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification.(The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work). 44 Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. 45 Weathering Course Concrete using best quality broken brick jelly of 20 mm uniform gauge in pure slaked lime ( NO Sand to be used ( over the RCC roof slab in the proportion of brick jelly to lime being 32 : 121/2 by volume laid over in single layer and consolidated to the required slope and finished thickness and beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime, jiggery water etc. complete complying with standard specifications and as directed 46 Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. 47 Plumbing Work 48 Supplying and fixing of Indus floor mounted white colour European water closet Parryware or equivalent, with seat cover and dual flush (3 & 6 lit) cistern having P trap withseat cover, supplyingnon corrosive hinges, CP bolts, nuts, washers, providing and fixing dash anchor fastners with bolts / L -brackets with anticorrosive paint cutting grooves in masonry or concrete surfaces, groutingwith cement concrete 1:2:4 mix, using 20mm size stone jelly,restoring the damaged portion to their original condition using required materials,fixing the water closet to perfect level,alignment,testingetc.complete. 49 Providing and keeping in stores, shifting to the place of installation, fixing,testing and commissioning ofwhite coloured vitreous china under counterRegular rectangular wash basin with brackets/ G.I. rag bolts and nuts painted,32mm dia brass C.P. waste coupling, (heavy) 32mm diabrassC.P.bottletrap,15mmdiabrassC.P.Anglestopcockwith flange, 15mm dia brass C.P. coldwater connecting pipe, etc., The work shall include,required extension nipples, cutting / chasing and making good the walls and floors- toilets. Wash Basin 50 Supply & Fixingat sitein position 15mm dia C.P brass BIB COCKS long body with wall flangeincludingcuttingandmakinggoodthe wallswhereverrequired 51 Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc.,complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). 52 Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks). 53 Supplying and fixing in positionC.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.(D) 54 Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition,including testing for any leakages,etc.,complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). 55 a) 40mm dia. 6kg class PVC pipes. 56 b) 50mm dia. 6kg class PVC pipes. 57 c) 75mm dia. 6kg class PVC pipes. 58 d) 110mm dia. 6kg class PVC pipes. 59 Supplying and fixing in position cost iron Nahini / Floor trap with Stainless steel grating / PVC nahini / Floor Trap with PVC Grating type of size 100 x 75 / 75 x 50 mm with best quality gratings of approved brand fixed over a bed of brick jelly lime concrete 1;2;5 (One lime two sand and five aggregate ) brick jelly 40mm and finishing with cm 1;3(One cement and three sand) including dismantling masonary wherever found necessary and making good to the original condition and giving connections to the cast iron pipe etc, complete complying with standard specififcation and as directed by the departmental Officers. 60 Supply and fixing in position best quality PVC IS 4985 - CLASS-II - 4 Kg/Sqcm -Rain water pipes of various size having ISI mark and providing leak proof joints with such asBend, Tee Junction, door etc.,of approved qualityincluding fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitary fittings, wherever necessary and making chipping good to the original condition, complying with standard specification etc.,complete. 61 b).110mm dia. 4kg class pipes. 62 Supplying and fixing in position of the following dia PVC rain water gratings for rain water pipes ,of approved quality and varietyof various size confirming to ISS andincluding necessary cutting and fixing and giving connection to PVC pipes etc., complete complying with standard specification and as directed by the Departmental Officer. 63 110mm dia 64 Supplying and fixing in position of the following dia PVC specials such asPVC vent Cowl etc.,of approved quality and varietyof various size confirming to ISS amend providing leak proof joint etc., including necessary cutting and fixing and giving connection to PVC pipes etc., complete complying with standard specification and as directed by the Departmental Officer. 65 a)75mm Dia 66 b)110mm Dia 67 PART-C - EXTERNAL DRAINAGE 68 Soil/ Waste Pipes 69 Supply and fixing in position best quality PVC IS 4985 - CLASS- III - 6 Kg/Sqcm -Soil/ waste pipes of various size with approved quality and varietyof various size confirminghaving ISI mark and providing leak proof joints including erection of below groundwith excavation and refilling etc.,and making connection to Manholes /Gully trap,wherever necessary and making chipping good portion to the original condition,complying with standard specification etc., complete. 70 160mm dia. 6kg class III-pipes. 71 Supply, laying and erction of glazed stone ware gully trap (100 x 75 mm) with 100 mm dia, outlet including embedding trap in cement concrete 1:3:6 and constructing chamber of size 300 x 300 mm inside clear in brick masonry 230 mm thick, plaster with water proof cement mortar (1:3) 15 mm thick on both internal and external surfaces inside finished with floating coat of neat cement. The work including excavation to required depth of gully trap and refilling and making good in the surface withProviding and fixing SFRC frame and cover 400 x 400 mm (clear opening) complete complying with std.specification. 72 Supplying and Erection and construction of sewer chambers of required internal dimensions 600x600 upto 0.6 mtr.depth with 230mm brick masonry in C.M.1:5 thk of masonry over bed of1:2:4 R.C.C. 200 mm thk bove 100 mm thk P.C.C.1;3:6 Cement concrete foundations over sand bed of 100mm thk channelling in 1;2:4 cement concrete, plastering in 1:3 cement mortar for internal and external surface finished with floating coat of neat cement, the work including excavation for required depth of gully trap and refilling and making good in the surface with SFRC cover and frame 600x600mm (clear opening)complete complying with standard specifications etc., 73 Construction of rain water recharge well of 1200mm dia and depth upto 1500mm, in addition 110 dia special blue slotted pipe for bore well.pipe should be laid from bottom of ring well centre to below 1500mm as shown in the drawings,including all types of excavation, occur for pipe,filling of rain water harvesting materials with construction of R.C.C. ring and top 100mm RCC SLAB WITH 450X450mm perforated SFRC manhole and 230mm brick wall in 2height with below 300mm lengthx100mm thk P.C.C. as per the structural filling the filter media as per drawing. 74 Supplying and fixing of PVC water storage tank of best approved quality and make of super thick with lid ofcapacity of 2000 litres with accessories including giving necessary connection etc., complete as directed by the departmental officer. (The PVC water storage tank should be got approved by the Engineer before use on work)(TWAD- Pano:173) 75 provision for rainwater harvesting structure 76 Electrification 77 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) 78 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End 79 Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End 80 Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.) 81 Supply and fixing of fancy glass shade and 7W / 9W LED bulb 82 Supply and fixing of single box type 440W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting 83 Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch 84 Supply and fixing of 1200mm (48) AC ceiling fan complete with stepped electronic 300W regulator with 300mm down 85 Supply and fixing of 300mm (12) sweep (light duty) AC exhaust fan complete without provision of hole in the wall 86 Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End 87 Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End 88 Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earthconnection (For AC Plug) 89 Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End 90 Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End 91 Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipeconcealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of theconcealed portion with suitable colour 92 Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. 93 Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVCrigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitablecolour 94 Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 6 sq.mm copper wire with painting of suitablecolour 95 Supply and run of 1 of No.8 SWG GI wire for earth connection 96 Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earthconnection 97 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 40mm 98 Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2 x 1-1/2 x 1/4 rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1 x 1/4 with inter connection of EB meter tofuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Lower End) with suitable necessary connection with earth connection complete 99 Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only 100 Supply and fixing of 63A TPNMC switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing 101 Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection 102 Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection 103 Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 104 Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 105 Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good 106 Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 107 Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 108 Septic Tank 109 Earthwork for foundationsand depositing on bank with initial lead of 10 Mt. and initial lift of 2 Mt. in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soilincluding excavated earth. 110 Supplying and filling in foundation and basement with M sand in layers of not more than 10cm thick well watered, rammed and consolidated etc., complete as per standard specification. 111 Laying the Plain Cement concrete 1:4:8(One cement four sand and eight brokenMachine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.The rates inclusive of Centering , shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts and curing etc.. 112 Supplying and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) 113 REINFORCED CEMENT CONCRETE M25 1:1.5:3 mixusing 20mm machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 (One cement and three sand ) and Kraft paper laid without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers. 114 Brick work in following Cement Mortar using best quality of Country Bricks of size 8-3/4 x 4-1/4 x 2-3/4 for foundation and basement including curing, etc., complete complying with standard specifiction. 115 Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally and externally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or champhering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface,chiseling the undulated surface wherever necessary and curing, etc., all materials and labour complete in all respects including all lead, lift and descent andas directed. 116 Supplying and fixing in position C.I.Manhole covers (heavy duty) mof various sizes of best approved quality and as per standard specificationsetc., complete.0.6X0.6M Size etc., complete. 117 Providing, machine mixing and laying on the P.C.C/ R.C.C. surface in approved panels of25 mm thick granolithic flooring in cement concrete mix of 1:2:4 (1 Cement: 2 Sand: 4 Aggregate 10 to 12 mm thick)well vibrated,compacted including 45 X 3 mm glass dividing strip, fixed to correct level and finished smooth and cured by keeping surfaces well-covered and protected against excess of an type. (The contractor to provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond and any curling, lifting or beybonding noticed shall be rectified by the contractor at his cost). 118 Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication. 119 Under Ground Sump 120 Earthwork for foundationsand depositing on bank with initial lead of 10 Mt. and initial lift of 2 Mt. in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soilincluding excavated earth. 121 Supplying and filling in foundation and basement with M sand in layers of not more than 10cm thick well watered, rammed and consolidated etc., complete as per standard specification. 122 Laying the Plain Cement concrete 1:4:8(One cement four sand and eight brokenMachine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.The rates inclusive of Centering , shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts and curing etc.. 123 Supplying and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) 124 Reinforced Cement Concrete 1:11/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers 125 Providing and applying 10 mm thick Cement plaster in Cement mortar 1:3 ( One part of Cement and Three parts of Sand ),to finishing the exposed surfaces of R.C.C. items of works such as Roof (or) floor slabs, beams,and Sun shades etc.to correct plane and l 126 Providing, machine mixing and laying on the P.C.C/ R.C.C. surface in approved panels of 25 mm thick granolithic flooring in cement concrete mix of 1:2:4 (1 Cement: 2 Sand: 4 Aggregate 10 to 12 mm thick)well vibrated,compacted including 45 X 3 mm glass dividing strip, fixed to correct level and finished smooth and cured by keeping surfaces well-covered and protected against excess of an type. (The contractor to provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond and any curling, lifting or beybonding noticed shall be rectified by the contractor at his cost) 127 Supplying and fixing in position C.I.Manhole covers (heavy duty) of various sizes of best approved quality and as per standard specificationsetc.,complete.0.6X0.6M Size etc., complete. 128 PVC mould CI steps for sump 129 Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication. 130 Aluminium ladder for maintenance over the Roof top 131 Provision for lab interior 132 Tactile Flooring and Braille Sign Board 133 Provision for Sitting bench and Cubboard Arrangements 134 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}
Contract Date: Jun 13, 2026 Contract Value : 1.68 Crore
Local Bodies No of Bidders 2
Contract Date: Jun 11, 2026 Contract Value : 10.89 Lakh
Local Bodies No of Bidders 4
Maharashtra View Result →
TenderDetail
Loading tenders