View Bid Results For Electric Thruster Tenders

We found 41 Bid Results related to electric thruster tenders. You can find Contractor details who won electric thruster tenders along with contract details in Bid awards announcements section.

Indian Tenders
13
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
23
17
1
Tender Publishing Platform
2
39
State / UT
12
20
4
3
3
2
2
2
1
1
1
1
1
Contract Value
26
5
8
2
Publish Date
0
0
0
0
0
Sector
8
21
11
2
2
2
1
1
1
Ownership
5
15
11
10
4
1
Within keyword
Active filters:
Showing 1–1 of 41 tenders matching your filters
1.
Agriculture #11475879 Technical Bid
Tender For Motor Rewinding Work- 1 Electric Motor Rewinding Insulation Class- B0.5 Hp, 720, 960, 1440, 2900 Rpm Stator 2 0.75 Hp, 720, 960, 1440, 2900 Rpm Stator 3 1.00 Hp 720, 960, 1440,2900 Rpm Stator 4 2.00 Hp 720, 960, 1440,2900 Rpm Stator 5 3.00 Hp 720, 960, 1440,2900 Rpm Stator 6 5.00 Hp 720, 960, 1440,2900 Rpm Stator 7 7.5 Hp 720, 960, 1440,2900 Rpm Stator 8 10 Hp 720, 960, 1440,2900 Rpm Stator 9 11.5 Hp 720, 960, 1440, 2900 Rpm Stator 10 12.5 Hp 720, 960, 1440, 2900 Rpm Stator 11 15.00 Hp 720, 960, 1440, 2900 Rpm Stator 12 20 Hp To 120 Hp, 720, 960, 1440, 2900 Rpm Stator 13 Rotor 14 Rewinding Of Crane Duty Motor 15 Hp, 960 Rpm, Insulation Class- H Rotor 15 Stator 16 25 Hp, 960 Rpm, Insulation Class- H Rotor 17 Stator 18 Slipring Motor75 Hp, 1440 Rpm, Squral Cage Rotor Of Alluminium Binding Converted Into Copper Strip Binding And Dynamic Balancing With Certificate. 19 120 Hp To 250 Hp, 960,1440 Rpm Strip Binding Rotor 20 Stator 21 250 Hp, 585 Rpm, Strip Binding Rotor 22 Stator 23 265 Hp, 960 Rpm, Strip Binding Rotor 24 Stator 25 400 Hp, 720 Rpm, Strip Binding Rotor 26 Stator 27 Rewinding Of Cane Unloader Motor S-5 Duty 415 Volt15 Hp, 965 Rpm , 900 Starts/Stop Per Hour Rotor 28 Stator 29 25 Hp, 965 Rpm , 900 Starts/Stop Per Hour Rotor 30 Stator 31 Three Speed Motor Insulation Class - Fcentrifugal Motor 110 Kw Ac 1St Speed Upto 200 Rpm 32 2Nd & 3Rd Speed Upto 450 Rpm & 960 Rpm 33 Dc-Motor D-412 Kcp Centrifugal Machine 167 Kv, 1250 Rpm Rotor 34 Stator 35 Repair Of Core Assembly For 3 Speed Motor Of Centrifugal Machine 36 Buffing & Policing Of Rotor Commutator Of Dc Motor For D-412 Centrifugal Machine 37 Welding Machine Spares Rewinding Primary Coil 38 Secondary Coil 39 Choke Coil 40 D.C.Welding Machine Rectifier 230/24 Volt, 600 Amp. 41 Rewinding And Repairing Of Electronic Welding Machine 3 Phase 400 Amp. 42 D.G.Set Spares Rewinding166 Kva Alternator Of Dg Set 1500 Rpm, 50Hz, Pole Of Rotor 4 Nos. Complete Rewinding H Class Enamelled Copper Strip With Material And Labour And Dynamic Balancing With Test Certificate Rotor 43 Stator 44 320 Kva Alternator Of Dg Set 1500 Rpm Rotor 45 Stator 46 166 Kva Alternator Set Excitation System (Booster) 47 320 Kva Alternator Excitor Rotor 48 320 Kva Alternator Excitor Filed Coil 49 Rewinding And Repair Of Submersible Pump Motor 15 Hp 50 25 Hp 51 Complete Rewinding Of 1875 Kva Excitor Rotor (Jyoti Make) Of 1500 Kw Alternator With Satisfactory Testing & Trial On Load. 52 Other Rewinding Workbreak Thruster Mootor 53 Cooler Fan Single Speed / Three Speed 54 Exhaust Fan Single Phase / Three Speed 55 Rewinding Of Celling Fan 56 Brass Holder For Turbine Excitor 57 Copper Carbon Brush For Turbine Excitor 58 Repairing Of D.C. Excitor (Jyoti Make) 15 Kw With Packing & Cutting Of Commutator & Re-Soldering Of Lug Etc. Complete 59 Charges For Supply Of Diode Fixing Plate Alluminium For 1875 Kva Turbine Alternator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 3
Uttarakhand View Result →
2.
Power #10912971 AOC
Bids Are Invited For Preventive Maintenance & Load Testing/ Inspection Of Material Handling Equipments (E.G. Hoists, Eot Cranes, Mobile Cranes & Forklifts Etc.) And Maintenance Of Rolling Shutters.; 1.0 PM of Cranes & Hoists 1.01 Six Monthly preventive maintenance of EOT Crane (capacity 2 ton to 75 ton) / Electric hoist (0.5T to 12.5T) as per the approved checklist 200.0 Nos. 1.02 Annual preventive maintenance of EOT Crane (capacity 2 ton to 75 ton)/Electric hoist (0.5T to 5T) as per the approved checklist 100.0 Nos. 2.0 Load testing of Crane & Hoist, Chain pulley block, mobile crane, forklift, max puller 2.01 Annual load testing of EOT crane (Capacity 2 ton to 20 ton). 40.0 Nos. 2.02 Annual load testing of EOT crane (Capacity 30 ton to 75 ton) 10.0 Nos. 2.03 Annual load testing of Electric hoist (Capacity 0.5 to 12.5 Ton). 50.0 Nos. 2.04 Annual load testing of mobile cranes & DPT of hook (Capacity 55 ton & 12 ton) 2.0 Nos. 2.05 Annual load testing of forklifts (Cap 1 ton to 10 ton) 8.0 Nos. 2.06 Annual PM & load testing of manual hoist ( mono rail with chain pulley block) capacity 0.5 ton to 5 ton 180.0 Nos. 2.07 Annual PM & load testing of Chain Pulley block (SWL0.5 ton to 5 tonn) 185.0 Nos. 2.08 Annual PM & load testing of Hydraullic Pellet Trolley (SWL:upto 3 Tonn) 70.0 Nos. 3.0 Inspection of Specila liftin tool tackles, D-shackle,eyebolt and special lifting tackles 3.01 Dismantling, visual & DPT, boxup of HP turbine rotor lifting beam 2.0 Nos. 3.02 Dismantling, visual & DPT, boxup of LP turbine rotor lifting beam 2.0 Nos. 3.03 Dismantling, visual & DPT, boxup of Turbine easing gear 2.0 Nos. 3.04 Dismantling, visual & DPT, boxup of LP turbine outer casing lifting pin 8.0 Nos. 3.05 Dismantling, visual & DPT, boxup of Turn buckle for lifting HP turbine casing 2.0 Nos. 3.06 Dismantling, visual & DPT, boxup of PCP lifting pin-plate assembly consisting of 4 nos. of plates and 6 nos. of pins. 2.0 Nos. 3.07 Dismantling, visual & DPT, boxup of chlorine toner lifting beam (attached to manual hoist Nos. 0-76230-MH-07 of 2T capacity) consisting of 1 no. of plate and 4 nos. of pins/bolts, 1 No. of D shackles, 3 nos. of hook. 2.0 Nos. 3.08 Annual inspection of slings, D-shackles & eye bolts. 1900.0 Nos. 4.0 Maintenance of rolling shutter 4.01 Six Monthly preventive maintenance of turbine building motor operated rolling shutter (size max. 5mx12m). 20.0 Nos. 4.02 Complete Overhauling of Rolling of shutter (Size Max. L-6 Mtr x H-7Mtr, 5Mx12M) 25.0 Nos. 5.0 Need based maintenance of EOT cranes, hoists and Shutter 5.01 Wire rope replacement of EOT crane/ electric hoists (if required) 2.0 Nos. 5.02 Overhauling of LT gearbox /CT gearbox/ Main hoist gearbox of EOT crane/ electric hoist having SWL up to 75 Ton (if required) 3.0 Nos. 5.03 Maint. / replacement of thruster /electromagnetic brake of crane & hoist (if required ) 15.0 Nos. 5.04 Revamping /redressing of control panels of crane & hoist, if required 8.0 Nos. 5.05 Replacement of pendant/its set of button for EOT Crane/Hoist 8.0 Nos. 5.06 Replacement / maintenance of limit switch/fuse of crane & hoist, cleaning of contacts, moisture etc if required 65.0 Nos. 5.07 Maintenance/ replacement of wheel (each) of crane& hoist 6.0 Nos. 5.08 Laying of power cable having outer dia meter 6 mm to 80 mm in existing cable trays. 300.0 Nos. 5.09 Removal & shifting of manual hoist/CPB from one location and its installation at another location. 22.0 Nos. 5.1 Motor overhauling of motor From 0.18 KW to 3.7 KW, as per applicable procedure . 5.0 Nos. 5.11 Motor overhauling of motor From 5.5 KW to 22.5 KW, as per applicable procedure 4.0 Nos. 5.12 Motor overhauling of motor From 30.0KW to 75.0 KW, as per applicable procedure . 2.0 Nos. 5.13 Decoupling of Motor and Gear Box,allignment correction and coupling. 4.0 Nos. 5.14 Removal and Fixing of coil spring of matching size and shape of shutter. 20.0 Nos. 5.15 Removal and Fixing of lower/upper gear assembly of shutter 10.0 Nos. 5.16 Removal and Fixing of shutter iron strips as per matching size. 50.0 Nos. 5.17 Replacement of shutter rotor cover of matching size. 6.0 Nos. 5.18 Repair of shutter rotor and coil spring 20.0 Nos. 5.19 Rewinding of Electromagnetic (EM) brake coil of crane . 20.0 Nos. 6.0 Maintenance coverage and Crane operation 6.01 Maintenance coverage for attending complaint of crane/hoist upto 8 hrs during normal working day. 130.0 Nos. 6.02 Maintenance coverage for attending complaint of crane/hoist or coverage during lifting of any critical load upto 4 hrs during off hrs or holiday. 200.0 Nos. 6.03 EOT Crane/Electric Hoist operation upto 8 hrs during normal hours on any working day. 600.0 Nos. 6.04 EOT Crane/Electric Hoist operation upto 4 hrs during off hours, Sunday, Holiday 360.0 Nos. 7.0 Supply Items 7.01 Supply of new brake coil of Electro magnetic (EM) brake for different cranes. 12 Nos. 7.02 Supply of strip /spring for shutters (Kg) 150 Kg 7.03 Supply of Electro hydraulic Thrust brake suitable for 300 mm to 400mm drum dia with 18 kg load to work on 3 phase 50C/s,400/440 volts, braking torque 42 Kg.M without drum 7 Nos. 7.04 Supply of Electro hydraulic Thrust brake suitable for 100 mm to 200 mm drum dia with 18 kg load to work on 3 phase 50C/s,400/440 volts,braking torque 42 Kg.M without drum 7 Nos. 7.05 Supply of Chain Pulley Block, SWL-1 Ton, Lift -10 Mtrs 2 Nos. 7.06 Supply of Chain Pulley Block, SWL-2 Ton, Lift -10 Mtrs 2 Nos. 7.07 Supply of Chain Pulley Block, SWL-3 Ton, Lift -10 Mtrs 2 Nos. 7.08 Supply of Chain Pulley Block, SWL-5 Ton, Lift -10 Mtrs 1 Nos. 7.09 Manual Hoist Trolley with Chain Pulley Block each having SWL:5.0 Tonn with length of chain upto 10 Meter 2 Nos.
Contract Date: Ref. Documents Contract Value : ₹ 72.35 Lakh
Boards / Undertakings / PSU No of Bidders 6
Uttar Pradesh View Result →
3.
Water Resources and Irrigation #10775900 Price Bid
Repair Of 15 Ton Electric Overhead Traverse (Eot) Crane Along Other Allied Accessories / Works Installed At Tph, Jammu-Repairs to 15 Ton EOT crane by way of disconnecting main supply of EOT Crane, decoupling gearbox from 10 HPmotor, dismounting Gear box from Trolley to the Ground by suitable means,Repairs to gear box by way of dismantling, checking, cleaning of the gear box housing/parts with kerosene oil/diesel, P/F new driven shaft- 01 No. , bearingof gear driven shaft(APS) - 01 No., Oil seals-08 Nos.,assembling, mounting and fitting gear box at its position after replacement of damaged parts. Refilling of gear box with gear oil by providing and filling new gear oil up to required label(15 ltr). Repairs to brake system of E.O.T Crane by way of complete servicing of 02 no. brakes(thruster & electromagnetic) includingreplacement ofBrake coil of electromagnetic brake-01 No., Break leather set of both brakesalong with requisite no of tension springs, rivets, nuts, bolts , brake drum(APS) of electromagnetic brake- 01 No with providing and fitting new one. Providing and filling brake oil- 01 ltr. Repairs to control panel of E.O.T Crane by providing & fitting new contacts & magnetic coil to 02 no. contactors of Siemens make. Providing & fitting new contactor of 25 Amp. 3 pole, 230v-02 no. in place of damaged one. Replacement of HRC fuses 03 no. Replacement of damaged cable hangers of 04 core service cable of E.O.T by way of providing & fitting 12 no. new cable hangers. Complete job includes testing and commissioning of E.O.T Crane on load. Job includes material & labor cost including charges for all tools & tackles required for execution of job. 2 Ravi Canal :- D-18 H/R, DOL Vijaypur.Complete Job.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Jammu And Kashmir View Result →
4.
Defence #9667158 AOC
Tender For Augmentation Of Facility At Mid Department At Nd Visakhapatnam; 1 SCHEDULE A PART - I [CIVIL REPAIR WORKS] 2 Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm complete all as specified and directed. 3 Demolition of cement concrete [reinforced]of any description and in any position not otherwise specifically provided for and reinforcement cut as required to facilitate demolition, complete all as specified and as directed. Note: Separating of reinforcement will be measured and paid separately under relevant item. 4 Separating, scraping and cleaning of reinforcement complete all as specified and directed. Note: Demolition of concrete measured and paid separately under relevant item. 5 Demolition of cement concrete inground floors andpavings not exceeding 15 cm thickness, complete all as specified and directed. 6 Dismantling floor, hearth or wall tiling including cement mortar bedding including removal serviceable tiles to store and rubbish off the premises to a distance exc. 1.5km but not exc. 5.0km, complete all as specified and as directed. 7 Taking down cement plaster on brick or stone walls etc. including racking out joints hacking for key, scrubbing down with water etc. and rubbish off the premises to a distance exc. 1.5km but not exc. 5.0km, complete all as specified and as directed. 8 Dismantling of wall and ceiling boards (fiber, pulp, insulations, etc.) or insulation boards/slabs/ ceiling of any thickness, including cover fillets and frame, complete all as specified and directed. 9 Removing building materials etc. (other than spoil payable under Earthwork) outside MD land at GVMC designated places exc. 1.5km but not exc. 5km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. 10 Material and labour for brickwork with Fly Ash Bricks, using old size bricks straight or curved on plan exceeding 6m mean radius, using modular bricks built in Cement Mortar 1:4, complete all as specified and directed. 11 Material and labour for dark shade/double charged/ultra charged vitrified tiles 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles with and including backing layer of 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed. 12 Material and labour for dark shade/double charged/ultra charged vitrified tiles 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm , cut to size required as in dados and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles with and including 10mm thick rendering as backing coat in cement mortar (1:4) for receiving of tiles completeall as specified and directed. 13 Supply and application of epoxy bonding agent - Nitobond EP/Epoxy bonding agent of STP Ltd (Or equivalent ) on the prepared old concrete surface using brush or roller as per manufacturer specification or as directed by Engineer-in-Charge 14 Material and labour for granolithic concrete 1:1:2 floor topping 30mm thick, laid over cement concrete subfloors etc. and finished to the surface even and fair, complete all as specified and as directed. 15 Material and labour for wear proof topping 20mm thick as specified (incorporating an approved metallic floor hardener), as per manufacturer instructions laid on concrete floors and pavings, and finished even and smooth (except metallic hardener), complete all as specified and as directed. 16 Supply only metallic Floor hardener, complete all as specified and as directed. 17 Material and labour for forming Construction joint joints 30mm deep x 10mm wide, filled with sealing compound, grade A, completeall as specified and directed. 18 Material and labour for groove cutting and filling with semi-rigid heavy duety epoxy urethane joint sealant Nitoseal PU280/Shaliseal PU PG 2K (Or Equivalent) having MAF-10%, groove size of 10mm x 10mm, complete all as directed by Engr-in-Charge. 19 Material and labour for non-skid resistant polymer flooring (epoxy self levelling topping for 4mm - Nitoflor SL 4000/Shalifloor SL of STP Ltd) (Or equivalent ), complete all as directed by Engr-in-Charge. 20 Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:4 finished even and fair without using extra cement complete all as specified and as directed. 21 Material and labour for applying two coats of distemper acrylic emulsion paint with and including a coat of wall care putty and priming coat of alkali resistant primer, with and including preparation of newly plastered surfaces, all as per manufacturers instructions, complete all as specified and as directed. 22 Material and labour for complete removal of existing treatment and applying two coats of distemper acrylic emulsion paint with and including a coat of wall care putty and priming coat of alkali resistant primer, with and including preparation of the surfaces, all as per manufacturers instructions, complete all as specified and as directed. 23 Providing & fixingfalse ceiling at all heights with semi perforated 12mm thick micro tegular edgedGRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (Part-4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 1250 grams per sqm including both sides) comprising of main-T runners of size 15 x 32mm of length 3000mm, cross -T of size 15 x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasterns, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x 25 x 2mm.Galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-Charge 24 Supply & fixing aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows and ventilators with one or more rebates of extruded built up standard tubular and other section of approved make, according to IS 1868 (Thickness of powder coating not less than 50 micron) fixed with rawl plugs, screws or fixing with clamps or with expansion hold fasteners including necessary filling up of gaps of junctions at top, bottom and sides with required EPDM / PVC/neoprene gasket etc., aluminium sections should be smooth, rust free, straight mitred and jointed mechanically wherever required including cleat angle, PVC/Neoprene gasket for glazing, panelling, aluminium anodised screws etc. complete all as specified and as directed. 25 Supply & fixing Aluminium Powder coated(minimum thickness of powder coating 50 micron) for doors, windows, ventilators andpartitions (Fixed portions) , tracked windows, sliding doors with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, complete all as specified and directed. 26 Supply & fixing powder coated aluminium door shutters, sections weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing and powder coated aluminium snap beading screws complete all as specified. (thickness of powder coating not less than 50 micron) as per architectural drawings and complete all as specified and directed.Note : Only aluminium shutter for the doors shall be measured in sqm.All the aluminium fittings/fixtures such as butt hinges, tower bolts, handles etc., Pre-laminated particle board and sheet glass shall be measured and paid separately under relevant items 27 Supply & fixing minimum 5.5mm thick sheet glass of ordinary quality of approved brand fixed in position with and including PVC/Neoprene gasket for glazing, glazing clips in doors, windows, partitions etc., as in squares exceeding 0.50 Sqm in each pane etc., with all required accessories, complete all as specified and directed. 28 Supply & fixing 12mm thick pre-laminated particle board, exterior grade, pre-laminated on both sides with decorative choice lamination and fixed in aluminium partitions, doors shutters etc., fixed with and including 12mm thick rubber gasket, aluminium glazing clips, complete all as specified and as directed. 29 Supply & fixing aluminium (die cast body) door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. 30 Supply & fixing brass mortice locks, vertical type 100mm size 4 levers, complete all as specified and as directed. 31 Supply & fixing 150mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed. 32 Supply & fixing floor door stopper with rubber shoe 150/140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed complete all as specified and as directed. 33 SUB TOTAL OF SCHEDULE A PART - I 34 SCHEDULE A PART - II [INTERNAL ELECTRIFICATION] 35 Supply and fixing for Circuit / Sub main wiring with two runs of 4.0 Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 4.0 Sqmm as earth wire, drawn through and including PVC conduit of suitable size minimum 25mm dia, concealed type, medium grade as per IS 9537 (Part 3-1983) with conduit accessories, complete all as specified and as directed. 36 Supply and fixing of vertical TPN DB suitable for MCCB 125A incomer double door type IP 43 protection sheet metal enclosure 12 ways 36 module, completeall as specified and directed by Engineer-in- charge. 37 Supply and fixing of vertical TPN DB suitable for MCCB 125A incomer double door type IP 43 protection sheet metal enclosure 08 ways 24 module, completeall as specified and directed by Engineer-in- charge. 38 Supply and fix 4 Pole MCCB 125A, 50Hz, 415V, with rupturing capacity 35kA, complete all as specified and as directed by Engineer-in-Charge 39 Supply and fixing 415V 10KA C curve miniature circuit breaker (MCB) of TP 25 to 63 amp and current carrying capacity in the DB complete with connection testing and commissioning, complete all as specified and as directed. 40 Supply and fixing motorised roof air ventilator of size24 capacity 10000cfm MOC:FRP 4mm ,height 22inch, length 2000mm, width 1000mm, both side grill, rpm 960, 230 Volts, No. of blade 6, complete all as specified and as directed by Engineer in Charge. 41 Material & labour for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in both ways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item. 42 Supply, laying, testing and commissioning of LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts Earthed, grade cross sectional area 25 sq. mm, 4 core with and including cable glands, ferrules and connected accessories laid in trenches or through pipe etc., complete all as specified and as directed. 43 SUB TOTAL OF SCHEDULE A PART - II 44 SCHEDULE A PART - III [EOT CRANE] 45 Dismantling and taking down existing 2.0 ton crane, handed over to user department (necessary receipt voucher to be obtained duly signed and kept on record) and design, fabricate, supply, erect, test and commissioning of 2 Ton Capacity Single girder EOT crane push button and radio remote control system complete with span of 16 Mtrs (approx.), long travel of 50 Mtr and lift hook 12 Mtr from floor level including supply, laying of crane track rail of suitable cross section on existing gantry girder and painting the girder including auxiliary hoist, three phase, electrically operated with connected accessories like rope drum, steel wire rope, sheaves, pulleys, hydraulic thruster brake, single phase preventer, over load relay, SFU, air brake contactor, main hoist motor, micro hoist motor, cross travel motor, long travel motor, lifting hook, service platform, walk way with railing, ladders, buffers, provision safety siren for overload, load indicator, safety hooks/clamps on wall for operation and maintenance of track and DSL systemetc. completeetc. complete all as specified and directed by Engineer-in-Charge including the following :- (a) Design supply, install, test and commissioning DSL system with PVC shrouded copper bus bar for 3 phase and neutral including earth bus system all as specified suitable for 2 TON EOT Crane, complete all as specified and directed. 46 (b) Provision of LT power cable of suitable size from the panel board to crane.(c) Provision of additional push button system with interlocking wiring etc., complete as per OEM specification.(d) Main hoist speed - 3 Mtr/min (g) Main creep speed - 0.3 Mtr/min(e) long travelspeed - 5 Mtr/min(j) Long creep speed - 1 Mtr/min(f) Cross travelspeed- 10 Mtr/min(l) Cross creepspeed - 1 Mtr/minNote:-(i) All the crane/hoists are including gantry rails of suitable size DSL system with PVC shrouded copper bus bar etc. complete.(ii) All micro speed will be 1/10 of main speed by all motions.(iii) Audio visual alarm to provide to all motions, single phase preventer, over load relay, safety siren/overload alarm and ladder from floor level.(iv) All cranes & hoist shall confirm to IS 807 & IS 3177.(v) The bidder have to visit the site before quoting the tender please 47 SUB TOTAL OF SCHEDULE A PART - III 48 SCHEDULE A PART - IV [FIRE DETECTION SYSTEM] 49 Supply and fixing of Touch Screen loop Expandable up to 9 Loops addressable fire alarm panel, Panel with Sensor status indications: - Sensor status is indicated by the different colors: Color Device conditions for clean detector, Medium clean Detector, Sensor almost dirty. Dirty. 1-3 loop formats expandable upto 9 loops, upto 1000 fire detection zones 200 per panel. True peer-to-peer networking Supports intelligent/ programmable remote terminals, BMS interface. Which consists of backlit display 480 x 272 TFT 4.3”menu driven graphical touch screen IP Gateway and I/O Drivers Auto learn and Loop detection 1000 event log entries. Simplified logic delivers click and go configuration. Approved to EN54 parts 2 and 4. Quick start and protect-A working system after an auto learn is performed. Optional Peripheral expansion card UP to 254 devices per loop (Protocol dependent). Up to 188,800 devices per network. Networkable up to 200 nodes. Circuit monitoring of local panel circuits. Simple Select & Click programming. Single area false alarm management. Compatible with to given makes. Single area false alarm management facility provision of CMS / Ad-Net Software-to monitor & control the status of the FACP from the windows based system- with Visual & Sound alerts for the fire and fault condition-with 1-3 Loop formats expandable up to 9 loops. Up to 1000 fire detection zones 200 per panel completeetc., complete all as specified and directed by Engineer-in-Charge. 50 Supply and fixing addressable intelligent touch screen type fire alarm repeater panel with graphic display touch screen (480x272 TFT 4.3) 14 LED front. 2 RS 485 for connection completeetc. complete all as specified and directed by Engineer-in-Charge. 51 Supply and fixing addressable type manual call point resettable type for indoors and out doors with Fire indication completeetc. complete all as specified and directed by Engineer-in-Charge 52 Supply and fixing addressable type loop sounders alongwith inbuilt isolator completeetc. complete all as specified and directed by Engineer-in-Charge. 53 Supply and fixing addressable type loop Open Area sounders alongwith inbuilt isolator complete all as specified and directed by Engineer-in-Charge. 54 Supply and fixing 2 core x 1.5 sqmm copper armoured cable nominal cross section area FRLS PVC insulated unsheathed cable with copperconductor, multi stranded 1100 V as per IS: 1554 including wall mounting/ceiling mounting with saddles clamps screws junction boxes and required necessary earthing etc. complete all as specified and as directed by Engineer-in-charge. 55 Supply and fixing 19mm dia rigid PVC conduit complete all as directed complete all as specified and directed by Engineer-in-Charge. 56 Supply and fixing multi type multi sensor (smoke detectors/heat detectors) and IR/UV/Flame detectors as required and to be installed as per IS specifications, complete all as specified and as directed. 57 SUB TOTAL OF SCHEDULE A PART - IV 58 SCHEDULE A PART - V [AIR CONDITIONING & REFRIGERATION] 59 Supply and install hi wall split inverter units indoor/outdoor complete with cordless remote control unit and with in built air ioniser copper coil and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 2.0 TR, 230 volt, 50 Hz, single phase; including accessories nuts bolts and brackets, complete all as specified and as directed.Note : AC drain pipe from AC indoor unit to the ground level to be incorporated in the quoted rate. 60 Supply and install voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 V with output voltage stabilised at 230 V with accuracy of + 2.5% and of capacity 5 KVAincluding all accessories complete all as specified and as directed by Engineer-in-Charge. 61 Supply and fixing of single pole and neutral metal clad enclosure with 2 pin and earth plug and socket complete with one single Pole MCB of capacity 20 Amps, 240V complete all as specified and as directed by Engineer-in-charge. 62 SUB TOTAL OF SCHEDULE A PART - V 63 SCHEDULE A PART - VI [EXTERNAL FIRE FIGHTING SYSTEM] 64 Supply, lay in ducts, jetty gallery connect, test and commissioningductile Iron pressure pipe of size 150mm dia with both sides flanged and conforming to IS-8329 : 2000 in standard maximum lengths, class K-9, flange rating PN-10, fixing and lining inside with cement mortar (CML) outside with bituminous coating as per Annx `C of IS-8329 including taking down existing pipe, complete all as specified and as directed by Engineer-in-Charge. 1. Necessary fittings will be measured and paid separately as Supply only. 65 Supply only DI Specials such as Bends , tapers any type, Tee pieces, single branch, Y junction, double branch, cross, collars, caps and plugs for connecting up to 400mm bore DI Pipe all as per IS:9523, complete all as specified and as directed. Note: Fittings shall be conforming to IS 9523:2000. 66 Supply and fixing in repair Single Headed Fire Hydrant Landing Valve of Type A of size 63 mm dia confirming to IS-5290 including all Joints and Jointing Material complete all as specified and as directed. 67 Material & labour for hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard complete all as specified and directed by Engineer-in-Charge. 68 Material & labour for fire hose of synthetic fiber 15 mtrs, 63mm dia as per IS 903 with IS Mark including gun metal coupling (Male and female parts), complete all as specified and as directed. 69 Supply & fix in repair fire hydrant stand posts 80mm dia 1.5 mtr height with provision of single outlet confirming to IS 908 complete all as specified and directed by Engineer-in-Charge. 70 Cutting existing CI/DI/MS Pipe line 150 mm dia & reducing to required length before laying including insertion of new tees, branches etc. for connecting of suitable size, complete all as specified and directed. 71 Supply and fixing of sluice valve, flanged of class PN 1.6 of size 150 mm dia including steel spindle with head, iron wheel, gland with gland packing, etc. and necessary fixing arrangement likerubber gasket etc., complete all as specified and as directed by Engineer-in-charge. 72 Supply, installation, testing and commissioning in repairof 150mm dia 2 way fire brigade inlets with isolation valve with instantaneous SS coupling, 63mm dia with required fittings, complete all as specified and directed by Engr-in-Charge. 73 Material & labour for Valve chamber of size 1500mm x 1500mm x 1200mm internal dimensions, with and including excavation in any type of soil, spreading, levelling and refilling etc. PCC (1:4:8) type D2 for foundation, Fly ash brick work of one brick thick wall in CM (1:4) including internal plaster 15mm thick in CM (1:4) external plaster 15mm thick(1:4) upto 150mm below GL and providing coping in PCC (1;2:4) type B1, angular iron frame of size 50x50x6mm with 6mm thick MS plate cover complete including locking arrangements and having FRP coating of 2mm thick on both inside and outside surfaces all as shown in TD drawing and complete all as specified and as directed by Engineer-in-Charge. 74 Supply and fix CO2 stored pressure type, fire extinguishers -9.0 Kg capacity complete with initial charge, gun metal cap, discharge hose with AB horn, nozzle, wall fixing brackets etc. confirming to IS : 15683 with ISI mark complete all as specified and as directed by Engineer-in-Charge. 75 Supply and fix light weight screw grip type CO2 fire extinguishers -4.5 Kg capacity complete with initial charge, gun metal cap, discharge hose with AB horn, nozzle, wall fixing brackets etc. confirming to IS : 15683 with ISI mark complete all as specified and as directed by Engineer-in-Charge. 76 Supply and fix dry chemical powder stored pressure type - 9 Kg capacity complete with initial charge, fund metal cap, discharge hose with nozzle wall fixing brackets etc. confirming to IS:15683 with ISI mark complete all as specified and as directed by Engineer-in-Charge. 77 Material & labour for fabrication and erection of fire stand of suitable size made out of angle iron/channel and painting with two coats of post office red colour synthetic enamel paint over a coat of red oxide primer and lettering with white paint including galvanised MS fire bucket- 03 Nos, 5 litre capacity, complete all as specified and as directed by Engineer-in-Charge. 78 SUB TOTAL OF SCHEDULE A PART - VI 79 Total Amount in Figures 80 Quoted Amount in Words
Contract Date: Apr 27, 2026 Contract Value : ₹ 2.16 Crore
Statutory Bodies & Commissions/Committees No of Bidders 8
Andhra Pradesh View Result →
5.
Defence #9526498 AOC
Tender For Repair Maintenance Of Eot Cranes And Misc Installation At Military Station Kanasar Under Ge (N) Bikaner; 1 M&L for dismantling of various components ofFlame proof Electrically Operated EOT Crane of followingcapacity ranging from 2 Ton to 10 Ton of any span (45 Metre maximum) of cross/long travel and height of hoist (10 metre maximum) for carrying out overhauling and repairing various items (Electric motors, Main gear box, cross travel gear box, limit switch, pandent switch, electric control panel, thrusters, break drums, etc) and re-fixing the components in its position, tighting all nut & bolts / screws after carrying out overhauling / repair work including cleaning and removing old grease/ oil from tracks, steel wire rope, main hoist motor drum with approved cleanser and steel wire brush, regreasing with new grease for smooth running of wheels, pulleys, steel wire rope, etc and replacing minor extras / hardware as required, complete rewiring of electric control panel (consisting of VFD, transformer, contactors, choke / line reactor, electronic circuit) by new wire as per existing installed wire, including reprogramming of Variable Frquency Drives (VFD)with the help of laptop for new parameter entry, cleaning control panel with air blower, repairing all contacts of Pendant commandcontrol switch including replacing unserviceable parts such as push button, contacts, replacing broken cable plastic trollys,replacing all broken / leakage shaft seals/oil seals / O seals / V seals of any size of thruster / gear box complete all as specified and as directed. 2 Notes : (i) Repair/overhauling of EOT Crane shall be carried out through authorized service agency of Original Equipment Manufacturer (OEM). The contractor shall submit documentary proof/evidence in this regard before taking EOT Cranes under repair, overhauling, etc.(ii)Make and model of part to be replaced shall be same as used/recommended by OEM. (iii) Repairing/replacement of unserviceable Major main components catered for separately under respective items of this Schedule shall be measured & paid for separately. (iv) Grease/ Push buttons/ contacts /plastic cable trolly/ shaft seal/ oil seal / O seal / V seal included in quoted rates of this item and no extra payment shall be made. 3 EOT Crane of Capacity 2/3 Ton 4 EOT Crane of Capacity 5 Ton 5 EOT Crane of Capacity 10 Ton 6 M&L for repair/overhauling/servicing of Main Hoist Gear Box/ Cross travel gear box/ Long travel gear box offlame proof EOT Crane of following capacity including cleaning, recutting, polishing the gear teeth after remetalling and making good, remetalling of driving shaft, machining, finishing, polishing and making good for smooth running of crane, replacing worn out bushes, bearings on drive and non drive ends, reassembling all the components after necessary repair works, replacing the gear oil of the gear box upto required level, making adjustment to ensure trouble free smooth running of gear system complete all as specified and as directed.Notes :(i) Repair/overhauling/servicing of Gear Box shall be carried out through authorized service agency of Original Equipment Manufacturer (OEM). The contractor shall submit documentary proof/evidence in this regard before taking Gear Box under repair, overhauling, servicing, etc.(ii)Make and model of part to be replaced shall be same as used/recommended by OEM. (iii) Gear oil, ball bearing & spare parts as required shall be measured and paid for separately under respective items of this Schedule. 7 EOT Crane of Capacity 2/3 Ton 8 EOT Crane of Capacity 5 Ton 9 EOT Crane of Capacity 10 Ton 10 M&L for repair/overhauling the Flame proof electro hydrauilc Thruster & brake of following capacity of EOT Crane with gear holding brakes ofHoist / Creep / Cross travel and Long travel, rewinding the burnt out winding of electrohydrauiic thruster motor with super enamel copper wire of existing gauge and varnishing, heating and testing etc complete repairing of oil pump by replacing worn out parts, oil seal, ‘O’ ring and bush and bearing - 02 Nos (6201), check nuts, lock pin all as required including draining out old unserviceable oil complete all as specified & as directed :-Notes :(i) Repair/overhauling of Thruster shall be carried out through authorized service agency of Original Equipment Manufacturer (OEM). The contractor shall submit documentary proof/evidence in this regard before taking Thruster under repair, overhauling, etc.(ii)Make and model of part to be replaced shall be same as used/recommended by OEM. 11 Main hoist Thruster of 10 Ton EOT Crane. 12 Main hoist Thruster of 5 Ton EOT Crane. 13 Main hoist Thruster of 2 Ton /3 Ton EOT Crane. 14 Cross/Long Travel Thruster of 10 Ton EOT Crane. 15 Cross/Long Travel Thruster of 5 Ton EOT Crane. 16 Cross/Long Travel Thruster of 2 Ton /3 Ton EOT Crane. 17 Supply and fixing in replacement Hydrauilc oil (ISI marked) of approved grade for filling in the electrohydrauilc thruster upto specified level under the relevant item of this Schedule all as directed. 18 Supply and fixing in replacement Gear oil (ISI marked) of SP-320 grade for filling in the gear boxes upto specified level under the relevant item of this Schedule all as directed. 19 S&F in replacement of Power Contactor 3 pole, AC3 415 Volts for 4 KW or 9 Amps with 1 NO auxiliary contacts, (Model 3TF30 or 3RT2023-1AG20 or 3RT2023-1AL20 or 3TH3040 of make – Siemens/ Model No LC1D09 of make Schneider/ Model No LC1-D099 of make C&S or equivalent model in makes mentioned in Appendix B here-in-after), complete all as specified & as directed. 20 S&F in replacement of Power Contactor 3 pole, AC3 415 Volts for 15 KW or 32 Amps (Model 3TF34 of make – Siemens/ Model No LC1D32 of make Schneider/Model No TC1D32-10E of make C&S or equivalent model in makes mentioned in Appendix B here-in-after), complete all as specified & as directed. 21 S&F in replacement of Power Contactor 3 pole, AC3 415 Volts for 9 KW or 18 Amps with 1NO + 1NC auxiliary contacts Model No LC1D18 of make Schneider or equivalent model in makes mentioned in Appendix B here-in-after), complete all as specified & as directed. 22 S&F in replacement of Power Contactor 4 pole, AC1 415 Volts for 40 Amps operational current with 2NO + 2NC auxiliary contacts Model No LC1D 253 of make Schneider or equivalent model in makes mentioned in Appendix B here-in-after), complete all as specified & as directed. 23 S&F in replacement of thermal overload relay 3 Pole, AC3 415 Volts for thermal protection adjustment range 1-6-2.5 A, model NO LRD07 of make Schneider or equivalent complete all as specified & as directed. 24 Supply and fixing in replacement Ball bearing along with shaft seal/oil seal / O seal / V seal of shaft on main hoist/cross travel/Long travel wire rope drum on both side forfollowingcapacity gear box for main hoist for replacement under the relevant item of this Schedule all as directed.Make : TATA / SKF / NBC 25 EOT Crane of capacity 2/3 Ton 26 EOT Crane of capacity 5 Ton 27 EOT Crane of capacity 10 Ton 28 Supply and fixing galvanized Steel wire rope conforming to IS-2266-2002 of nominal diameter of 16mm having 6x19M (12/6-1) multi stranded construction steel core CRW grade 1570, having mass 97.4 Kg/100 RM with minimum breaking force of 102 KN suitable for lifting load of 10 Ton including greasing complete all as specified and as directed including taking down old unserviceable steel rope.Make : Usha / Bombay Foot / National or as used/recommended by OEM.Notes : (i) The steel rope shall be best performed plough straight non rotating type conforming to IS-2266. (ii) The breaking strength of the rope shall not be less than 6 time the safe working load thereon. (iii) Test Certificate of manufacturer shall be submitted by the contractor. 29 Supply and fixing galvanized Steel wire rope conforming to IS-2266-2002 of nominal diameter of 11mm having 6x19M (12/6-1) multi stranded construction steel core CRW grade 1570, having mass 46.1 Kg/100 RM with minimum breaking force of 63 KN suitable for lifting load of 5 Ton including greasing complete all as specified and as directed including taking down old unserviceable steel rope.Make : Usha / Bombay Foot / National or as used/recommended by OEM.Notes : (i) The steel rope shall be best performed plough straight non rotating type conforming to IS-2266. (ii) The breaking strength of the rope shall not be less than 6 time the safe working load thereon. (iii) Test Certificate of manufacturer shall be submitted by the contractor. 30 Supply and fixing galvanized Steel wire rope conforming to IS-2266-2002 of nominal diameter of 9mm having 6x19M (12/6-1) multi stranded construction steel core CRW grade 1570, having mass 30.8 Kg/100 RM with minimum breaking force of 42 KN suitable for lifting load of 3 Ton including greasing complete all as specified and as directed including taking down old unserviceable steel rope.Make : Usha / Bombay Foot / National or as used/recommended by OEM.Notes : (i) The steel rope shall be best performed plough straight non rotating type conforming to IS-2266. (ii) The breaking strength of the rope shall not be less than 6 time the safe working load thereon. (iii) Test Certificate of manufacturer shall be submitted by the contractor. 31 S&F in replacement Trailing flexible copper conductor cable (ISI marked) of size 1.5 Sqmm 16 Core, 1100 Volt, with & including movable clamps and single flanged rollers, complete all as specified & as directed. 32 S&F in replacement Trailing flexible copper conductor cable (ISI marked) of size 1.5 Sqmm 4 Core, 1100 Volt, with & including movable clamps and single flanged rollers, complete all as specified & as directed. 33 S&F in replacement PVC insulated & FR PVC round sheathed, multi stranded copper conductor cable (ISI marked) steel wire armoured of size 2.5 Sqmm 4 Core, 1100 Volt, complete all as specified & as directed. 34 S&F in replacement PVC insulated & FR PVC round sheathed, multi stranded copper conductor cable (ISI marked) steel wire armoured of size 4 Sqmm 4 Core, 1100 Volt, complete all as specified & as directed. 35 S&F in replacement PVC insulated & FR PVC round sheathed, multi stranded copper conductor cable (ISI marked) steel wire armoured of size 6 Sqmm 4 Core, 1100 Volt, complete all as specified & as directed. 36 S&F in repair Flame proof Thruster brake shoes for following capacity of EOT crane as per existing installed on site with necessary copper rivets etc complete of make Ferrodo liner or Usha or as used / recommended by OEM, complete all as specified & as directed. 37 EOT Crane of Capacity 2/3 Ton 38 EOT Crane of Capacity 5 Ton 39 EOT Crane of Capacity 10 Ton 40 M&L for disconnecting the burnt flame proof electric motor of capacity upto 0.75 to 0.55 KW, 3 Phase, 415 Volt from the EOT cranes transporting to workshop, taking out old winding and rewinding the motor with same gauge of copper wire, varnishing, overhauling complete including replacing the ball bearing on both ends, re-fitting to crane, re-connecting and testing complete all as specified & as directed. 41 M&L for disconnecting the burnt flame proof electric motor of capacity upto 1.1 KW, 3 Phase, 415 Volt from the EOT cranes transporting to workshop, taking out old winding and rewinding the motor with same gauge of copper wire, varnishing, overhauling complete including replacing the ball bearing on both ends, re-fitting to crane, re-connecting and testing complete all as specified & as directed. 42 M&L for disconnecting the burnt flame proof electric motor of capacity 2.5 to 2.2 KW, 3 Phase, 415 Volt from the EOT cranes transporting to workshop, taking out old winding and rewinding the motor with same gauge of copper wire, varnishing, overhauling complete including replacing the ball bearing on both ends, re-fitting to crane, re-connecting and testing complete all as specified & as directed. 43 M&L for disconnecting the burnt flame proof electric motor of capacity 3.75 KW, 3 Phase, 415 Volt from the EOT cranes transporting to workshop, taking out old winding and rewinding the motor with same gauge of copper wire, varnishing, overhauling complete including replacing the ball bearing on both ends, re-fitting to crane, re-connecting and testing complete all as specified & as directed. 44 M&L for disconnecting the burnt flame proof electric motor of capacity 6.5 KW, 3 Phase, 415 Volt from the EOT cranes transporting to workshop, taking out old winding and rewinding the motor with same gauge of copper wire, varnishing, overhauling complete including replacing the ball bearing on both ends, re-fitting to crane, re-connecting and testing complete all as specified & as directed. 45 Supply and fixing in replacement Variable Fequency Drive (VFD) / Vector Inverter / AC drive suitable for 3 phase electric motor used for EOT crane gear working on 3 phase 380- 480V power supply, protective structure enclosed type, cooling system force, permisible frequency fluctuation ±5%, 0.2 Hz- 400Hzhaving suitable input/output for 1.1 KW (HD) electric motor complete all as specified and as directed.Make :- Mitsubishi/ Yaskawa Electric Corporation / CG/ ABB / L&T or as per installed on site as recommended by OEM. 46 Supply and fixing in replacement Variable Fequency Drive (VFD) / Vector Inverter / AC drive suitable for 3 phase electric motor used for EOT crane gear working on 3 phase 380- 480V power supply, protective structure enclosed type, cooling system force, permisible frequency fluctuation ±5%, 0.2 Hz- 400Hzhaving suitable input/output for 1.5 KW (HD) & 2.2 KW (ND) electric motor complete all as specified and as directed.Make :- Mitsubishi/ Yaskawa Electric Corporation / CG/ ABB / L&T or as per installed on site as recommended by OEM. 47 Supply and fixing in replacement Variable Fequency Drive (VFD) / Vector Inverter / AC drive suitable for 3 phase electric motor used for EOT crane gear working on 3 phase 380- 480V power supply, protective structure enclosed type, cooling system force, permisible frequency fluctuation ±5%, 0.2 Hz- 400Hzhaving suitable input/output for 2.2 KW (HD) & 3.7 KW (ND) electric motor complete all as specified and as directed.Make :- Mitsubishi/ Yaskawa Electric Corporation / CG/ ABB / L&T or as per installed on site as recommended by OEM. 48 Supply and fixing in replacement Variable Fequency Drive (VFD) / Vector Inverter / AC drive suitable for 3 phase electric motor used for EOT crane gear working on 3 phase 380- 480V power supply, protective structure enclosed type, cooling system force, permisible frequency fluctuation ±5%, 0.2 Hz- 400Hzhaving suitable input/output for 4 KW (HD) electric motor complete all as specified and as directed.Make :- Mitsubishi/ Yaskawa Electric Corporation / CG/ ABB / L&T or as per installed on site as recommended by OEM. 49 Supply and fixing in replacement Variable Fequency Drive (VFD) / Vector Inverter / AC drive suitable for 3 phase electric motor used for EOT crane gear working on 3 phase 380- 480V power supply, protective structure enclosed type, cooling system force, permisible frequency fluctuation ±5%, 0.2 Hz- 400Hzhaving suitable input/output for 5.5 KW (HD) & 7.5 KW (ND) electric motor complete all as specified and as directed.Make :- Mitsubishi/ Yaskawa Electric Corporation / CG/ ABB / L&T or as per installed on site as recommended by OEM. 50 Supply and fixing in replacement Variable Fequency Drive (VFD) / Vector Inverter / AC drive suitable for 3 phase electric motor used for EOT crane gear working on 3 phase 380- 480V power supply, protective structure enclosed type, cooling system force, permisible frequency fluctuation ±5%, 0.2 Hz- 400Hzhaving suitable input/output for 7.5 KW (HD) & 11 KW (ND) electric motor complete all as specified and as directed.Make :- Mitsubishi/ Yaskawa Electric Corporation / CG/ ABB / L&T or as per installed on site as recommended by OEM. 51 Supply and fixing in replacement Control Transformer three phase having HT/LT ratio of 440/110 V AC, 50 / 60 Hz, Capacity 1000 VA copper wound complete all as specified and as directed. 52 Supply and fixing in replacement of power contactor 3 Pole, AC3, 415 Volts for 15 KW or 32 Amps with 1 NO auxiliary contacts, model No TC1D32-10E, of make C&S orequivalent out of makes specified in list of makes complete all as specified and directed. 53 Supply and fix in replacement following Spares/Components in EOT Crane of 2/3 Ton capacity after approval and as directed by Engineer-in-Charge :- 54 Carbon Brush 55 Over Load Relay. 56 Brake Liner. 57 Magnetic Coil. 58 Clutch Plate and Pin 59 Thrust Bearing. 60 Gear Wheel. 61 Pendant Push Button with auxiliary contacts. 62 Supply and fix in replacementfollowing Spares/Components in EOT Crane of 5 Ton capacity after approval and as directed by Engineer-in-Charge :- 63 Carbon Brush 64 Over Load Relay. 65 Brake Liner. 66 Magnetic Coil. 67 Clutch Plate and Pin 68 Thrust Bearing. 69 Gear Wheel. 70 Pendant Push Button with auxiliary contacts. 71 Supply and fix in replacementfollowing Spares/Components in EOT Crane of 10 Ton capacity after approval and as directed by Engineer-in-Charge :- 72 Carbon Brush 73 Over Load Relay. 74 Brake Liner. 75 Magnetic Coil. 76 Clutch Plate and Pin 77 Thrust Bearing. 78 Gear Wheel. 79 Pendant Push Button with auxiliary contacts. 80 M&L for load testing of over head travelling crane of following capacity EOT crane as per manufacture norm for safe working rating load including arrangement of dead load measurement unit with link steel wire rope and required suitable load for testing with duly varying the load upto 110% of the rated capacity of crane including transporting to testing load at difference location and also providing load test certificate in triplicate set from authorised OEM duly singed complete all as specified and directed. 81 EOT Crane of capacity 2/3 Ton 82 EOT Crane of capacity 5 Ton 83 EOT Crane of capacity 10 Ton 84 Supply and fixing in replacement flame proof three phase lever type limit switch with 10 Aps for 2 Ton to 10 Ton crane as per site, suitable for long travel / cross travel of make as used/recommanded by OEM complete all as specified and as directed. 85 Supply and fixing in replacement Electro magnetic brake/Thruster brake with brake drum for main hoist of any size complete all as specified and directed. 86 Supply and fixing in replacement Electro magnetic brake/Thruster brake with brake drum for long/cross travel of any size complete all as specified and directed. 87 Supply and fixing in replacement of flame proof suspension type pendent/hanging controling unit controlling unit with flame proof start/stop push buttons with indicator lamp and emergency control switch, lifting hook for UP and down, long travel motion, cross travel and conneting to controling micro speed panel suitable for safe and smooth operating system of EOT Crane of following capacity including making cable connection and testing complete all as specified and directed.Make : BCH/ Shyam/Sudhir or equivalent model and make. 88 EOT Crane of capacity 2/3 Ton 89 EOT Crane of capacity 5.0 Ton 90 EOT Crane of capacity 10.0 Ton 91 Supply and fixing in replacement packing kit for gear box complete all as specified and directed. Make : Cranex, API, KM Engg. 92 Supply and fixing in replacement of 1NO or 1NC auxiliary contacts model No 3TX4010-2A or 3TX4001-2A of make Siemens or equivalent complete all as specified and directed. 93 Supply and fixing in replacement flame proof three phase Rotary type limit switch with 40 Amps for 2 Ton to 10 Ton crane as per site, for Main hoist of make as used/recommanded by OEM complete all as specified and as directed. 94 Supply and fixing in replacement of Single Phase preventor (auto reset, 50 Volt inbalance) of make Minilec & Model No VSP3 or equivalent complete all as specified and directed.NOTE: The old unserviceable items retreived from Srl items 1.00 to 45.00 shall be the property of Deptt and same shall be deposited in E/M store yard by the contractor without any labour & transportation cost to the Deptt.
Contract Date: Feb 11, 2026 Contract Value : ₹ 16.88 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Rajasthan View Result →
6.
Agriculture #9499106 Technical Bid
Supply Of Electrical Material For Sugar Mill 2025-2026 Supply Of Electrical Material For Sugar Mill , Gpr Cum Synchronising Panel , Ammter[Digital Ac Ammter,96X96mm,Accuracy:0.5,Ctr:2500/1A,Aux. Supply 110Volt Dc,3 Phase,3Line Disply,Make= Elmeasure , Voltmeter[ Digital Ac Ammter,96X96mm,Accuracy:0.5,Range:0-15Kv Pt-Programable, Ptr:11Kv/110V Make:Elmeasure ,Make= Elmeasure , Ivt[110V/110V,50Va,Singal Phase,Cl:1.0,Ovf1.2 Continous Make:Pragati ,Make= Pragati , Coarse/Off/Fine Switch, 8 Pole,2Position With Off,32A ,Stay Put,Name Plate:Coarse/Off/Fine ,110V Dc,6 Contact In Fine, 2 Contact In Coarse, Pistol Grip Handle ,Make= Any Make , Reveres Reactive Power Relay Type-Xp2r,Ct I/P:1Amp,Pt I/P:110V Ac,Din Mounting, Aux Supply:110V Dc/2C/O Contacts Make:Woodward ,Make= Woodward , Roter Earth Fault Relay Type:Xr1, Aux.Volt:19-390V Dc,50Hz,Contacts2c/O,Mounting:Dinrail Make:Woodward ,Make= Woodward , Vector Surge Relay ,Make= Any Make , 11Kv ,3Core,300Sqmm,Xlpe,Steel Arrmoud Aluminium Cable ,Make= Any Make , 3Phase 110Kw 1440Rpm Frame Size 190 Voltage 415 Vac Motor ,Make= Any Make , Numerical Relay,Make= Any Make , Post Insulator For 132Kv Outdoor Type Switch Yard 90Kn ,Make= Any Make , Cummins Diesel Generator Sparte Parts ,Make= Any Make , Dc Voltage Dpm Rated I/P:500V Dc, Aux Supply:40-300V~45Va Model:Rish Eine+Voltage ,Make= Any Make , Avr Module ,Make= Abb , Hmi,Make= Abb , Dc Voltage Dpm Rated I/P:75Mv Dc, Aux Supply:40-300V~45Va Model:Rish Eine+Voltage ,Make= Any Make , 3Phase Voltage Dpm,I/P:100-500Vl-L,50-60Hz, Ptr:11Kv/110V ,Make= Any Make , Tripping & Closing Coil Assembly 110V Dc, For Abb Vcb Vd4 11Kv Ht Braker,Make= Abb , Breaker Poleabb Vcb, 11Kv Ht Braker ,Make= Abb , Auxalary Contact Assembly For Abb Vcb Vd4 H.T. Braker, Vd4 ,Make= Abb , Spring Charging Limit Switch 11 Kv, H.T. Breaker, Vd4 ,Make= Abb , Test Service Position Limit Switch 11Kv, Ht, Breaker Vd4 ,Make= Abb , Spring Charging Motor Assembly 240Vlt Ac For Abb Vcb Vd4 H.T. Breaker 11 Kv ,Make= Abb , Master Trip Relay[86],110V Dc Aux. Supply With 4No+3Nc Contacts,Flush Mounted Make:Abb ,Make= Abb , Current Transformer Epoxy Resin Cast . 3 Core -Ct -Core 1 -Cl0.5,10Ba,Core 2-Cl5p20,10Ba ,Core 3 Cl Ps Vk>=3Rct<5Oham Ct Ratio 25/1/1/1 For 11Kv 26.3 Ka For 3 Sec ,Make= Any Make , Potensial Transformer 11Kv/Rt3/11O/Rt3,30Va,Cl-0.5 ,Make= Any Make , Cane Unloader , Resistance For Lt Motor4.5 Kw ,Make= Any Make , Brake /Thruster-415 Volt 3 Ph ,Make= Any Make , Motor For Grab-415 Volt 3 Ph-15Hp ,Make= Any Make , Motor For Lt Slipring 415Volt 3 Ph- 4.5 Kw ,Make= Any Make , Rectifier Bridge-24V Dc-Mic ,Make= Any Make , Motor For Lt Main Hydraulic 415Volt 3 Ph-40Hp ,Make= Any Make , 132Kv Switchyard , Vector Surge Relay, Mrg2-1Hrd,Make:C&S ,Make= C&S , Sf6 Breaker Pole, 132 Kv ,Make= Abb , Post Insulator For 132Kv Line,90Kn ,Make= Abb , Lighting Arrestor For 132Kv Grid ,Make= Abb , Out Door Ct For V132kv Line Ctr 200/1Amp ,Make= Abb , Out Door Pt For 132Kv Line Ptr 132Kv/Rt3/110V/Rt3 ,Make= Abb , Chemical Earthing Electrode 10 Feet Length ,Make= Any Make , Carbon Brush , Techo Generator ( As Per Sample ) ,Make= Any Make , Laveler & Chopper-40X20x40/ 15Me ,Make= Any Make , Fibrizor-40X20x40/ C80x ,Make= Any Make , Lighting Materials , Asr Panels, Fan-Dia 380 Mm,3Ph,0.18Kw ,1400 Rpm-Marathon ,Make= Marathon , Vfd Panel Cooling Fan , Auxalary Fan,Make= Abb , Cooling Fan For Panel ,Make= Abb , A Batch M/C Power Module Cooling Fan,Make= Abb , Mill Vfd Module Cooling Fan Set ( Double ) ,Make= Abb , Techo Genrator For Dc Batch M/C Motor ,Make= Any Make , Mcb & Fuses , Selectror Switch, Type Spp29b,25Amps ,Make= Any Make , Selectror Switch,Type; 1S260, 10Amps ,Make= Any Make , Contactor Relay And Other Electric Material , Electronic Timercat Id:12Sdt0 Supply 240V Timing: 3Sec-120 Sec, Star-Delta ,Make= Any Make , Contactor Model: 3Ts35 00-0A..8K,Ac-3,40Amp, Coil Voltage -110Vac ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 25 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 35 Mm Square ,Make= Any Make , New Electrical Item , Led Tube Light Fitting 20 Watt , Led Light Complete Fitting 50 Watt , Led Flood Light Complete Fitting 200 Watt , S.P Switch 6 Amp, Anchor , 3/5 Pin Sockat 6 Amp, Anchor , S.P Switch 16 Amp, Anchor , 3/5 Pin Sockat 16 Amp, Anchor , 3 Pin Plug Top 16 Amp, Anchor , 3 Pin Plug Top 6 Amp, Anchor , Led Bulb 7 Watt 220 Vac , Led Bulb 9 Watt 220 Vac , Led Bulb 15 Watt 220 Vac , Led Bulb 20 Watt 220 Vac , P.T Bulb 320 Volt Ac , Electric Bell, 220 Vac , Celling Fan 48, 220 Volt Ac , Exhaust Fan, 24, 220 Volt Ac , Heat /Shrink 300 Mm2 X 3 Core Indoor Type, Make- Rechem , Exhaust Fan, 18, 220 Volt Ac , Single Phase 1.5 H.P Motor With Blower 220 V Ac , Impact Type Eclectormagnetic Vibrator With Controller, 220 Volt Ac Make- Vaideni , Electric Motor 3 Phase Induction Motor, Frame Size-90L, Power-2.2 Kw, Rpm-2876 Foot Mounted Type, Make-Siemens , Vfd Drive Cooling Fan, Ebmpapst Make, 6318/2, Tdhhp-127 Watt, 48/Dc, 2.65 Amp , Current Collector For Cane Unloader Bus Bar. , P.T. Holder, Anchor , Smps, 220 Vac/Vdc, 10 Amp, , Screw Druver Set Multiper Type, Th08, Thaparia , Coarge/ Off/Fine Seleator Switch - 32 Amp Spc 32 K 484/J 7 32A/660V Ac/Dc , (Switron)- Spd 125B/Ta3, 16A/250V, Dc Live/Dead Selector Switch -16A , Auto/Manual Seclection Switch (Switron)-113B/Ta3, -16A/250V , Selecter Switch (Switron)-Sbc 32P-244 R4 32A/660V Ac/Dc , Straight Bolt Heater Part No- Bt 0950143, Size-15.7X285 Mm, 220 Vac, Power 1.8 Kw , Neutral , Tnc Switch Trip/Close Ac-23 A-Kw, 3Ph-5.5 Ac-15 , (Fuse) 160 Fee Eaton-160A, British Standard Fuse 500V Dc , Screw Drivar 4 Mech- T-10, T-15, T-20, T-25 (Torx) , (Ups)- Online Ups 1 Kva, 24 Vdc, 4.3 A.Ac 1 Capacity, 1 Kva/800 Watt Bus Rating- 24 Vdc, 45A , Motor Connection Plate Motor -110 Kw, 2862 Rpm, Current180a, Kirloskar, Electric Hubbali Mic No-Tef-102-05 , Limit Switch (At No- Nlia-22 Shat Blower) , Coutral Card Acs 580 Vfd 01-246A-4 , Elbow (M.S.) Size 20 Mm , M.S Cousrefar Size 20 Mm , White Tools Make Miranda Workshop, Size 15X15 Mm, 20X20 Mm , Ss Measuring Scale - 1 Meter , Aluminium Lug Ring Type, 35 Sq Mm, 25 Sq Mm , Copper Flexicible Cable Single Core Lead - 90 Sq Mm, , Copper Flexicible Cable Single Core Lead - 70 Sq Mm, , Copper Flexicible Cable Single Core Lead - 50 Sq Mm, , Copper Flexicible Cable Single Core Lead - 35 Sq Mm, , Copper Flexicible Cable Single Core Lead - 25 Sq Mm, , Copper Flexicible Cable Single Core Lead - 16 Sq Mm, , Copper Flexicible Cable Single Core Lead - 10 Sq Mm, , Coorse/ Off/Fine Selector Switch, 8 Pole,2 Position With Off 32 Amp, Stay Put, 110 V Dc,6 Contacts In Fien And 2 Contact In Coorse With Pistal Grip Handle Make :-Switron , Digital Pf Meter 3 Ph , M Wire 96X96mmctr 2500/1A, 11Kvv3/110Vv3 0.5 Log 05 Lead, Cl :05, Aux Supply 110 Vdc Make- Elmeasure , Digital A.C Voltmeter 96X96 Mm Accuracy-05, Rang 0-15 Kv, Pt Pragmmable Ptr 11 Kv/110V Ac Built In Selector Switch, Aux Supply , Ammeter, Digital Ac Commter 96X96 Mm Accuracy - 0.5 Ctr 2500/ Amp, Ring 2-2500 Amp Aux Supply 110 Vdc 3 Phase 3 Line Disply Make Elmasure , Aux Contactor , Amek Siemeni 110 Vdc, 4 No Base 2 No +2Nc Add-On-Block
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
7.
Agriculture #9491817 Technical Bid
Supply Of Electrical Material For Sugar Mill 2025-2026 Supply Of Electrical Material For Sugar Mill , Gpr Cum Synchronising Panel , Ammter[Digital Ac Ammter,96X96mm,Accuracy:0.5,Ctr:2500/1A,Aux. Supply 110Volt Dc,3 Phase,3Line Disply,Make= Elmeasure , Voltmeter[ Digital Ac Ammter,96X96mm,Accuracy:0.5,Range:0-15Kv Pt-Programable, Ptr:11Kv/110V Make:Elmeasure ,Make= Elmeasure , Ivt[110V/110V,50Va,Singal Phase,Cl:1.0,Ovf1.2 Continous Make:Pragati ,Make= Pragati , Coarse/Off/Fine Switch, 8 Pole,2Position With Off,32A ,Stay Put,Name Plate:Coarse/Off/Fine ,110V Dc,6 Contact In Fine, 2 Contact In Coarse, Pistol Grip Handle ,Make= Any Make , Reveres Reactive Power Relay Type-Xp2r,Ct I/P:1Amp,Pt I/P:110V Ac,Din Mounting, Aux Supply:110V Dc/2C/O Contacts Make:Woodward ,Make= Woodward , Roter Earth Fault Relay Type:Xr1, Aux.Volt:19-390V Dc,50Hz,Contacts2c/O,Mounting:Dinrail Make:Woodward ,Make= Woodward , Vector Surge Relay ,Make= Any Make , 11Kv ,3Core,300Sqmm,Xlpe,Steel Arrmoud Aluminium Cable ,Make= Any Make , 3Phase 110Kw 1440Rpm Frame Size 190 Voltage 415 Vac Motor ,Make= Any Make , Numerical Relay,Make= Any Make , Post Insulator For 132Kv Outdoor Type Switch Yard 90Kn ,Make= Any Make , Cummins Diesel Generator Sparte Parts ,Make= Any Make , Dc Voltage Dpm Rated I/P:500V Dc, Aux Supply:40-300V~45Va Model:Rish Eine+Voltage ,Make= Any Make , Avr Module ,Make= Abb , Hmi,Make= Abb , Dc Voltage Dpm Rated I/P:75Mv Dc, Aux Supply:40-300V~45Va Model:Rish Eine+Voltage ,Make= Any Make , 3Phase Voltage Dpm,I/P:100-500Vl-L,50-60Hz, Ptr:11Kv/110V ,Make= Any Make , Tripping & Closing Coil Assembly 110V Dc, For Abb Vcb Vd4 11Kv Ht Braker,Make= Abb , Breaker Poleabb Vcb, 11Kv Ht Braker ,Make= Abb , Auxalary Contact Assembly For Abb Vcb Vd4 H.T. Braker, Vd4 ,Make= Abb , Spring Charging Limit Switch 11 Kv, H.T. Breaker, Vd4 ,Make= Abb , Test Service Position Limit Switch 11Kv, Ht, Breaker Vd4 ,Make= Abb , Spring Charging Motor Assembly 240Vlt Ac For Abb Vcb Vd4 H.T. Breaker 11 Kv ,Make= Abb , Master Trip Relay[86],110V Dc Aux. Supply With 4No+3Nc Contacts,Flush Mounted Make:Abb ,Make= Abb , Current Transformer Epoxy Resin Cast . 3 Core -Ct -Core 1 -Cl0.5,10Ba,Core 2-Cl5p20,10Ba ,Core 3 Cl Ps Vk>=3Rct<5Oham Ct Ratio 25/1/1/1 For 11Kv 26.3 Ka For 3 Sec ,Make= Any Make , Potensial Transformer 11Kv/Rt3/11O/Rt3,30Va,Cl-0.5 ,Make= Any Make , Cane Unloader , Resistance For Lt Motor4.5 Kw ,Make= Any Make , Brake /Thruster-415 Volt 3 Ph ,Make= Any Make , Motor For Grab-415 Volt 3 Ph-15Hp ,Make= Any Make , Motor For Lt Slipring 415Volt 3 Ph- 4.5 Kw ,Make= Any Make , Rectifier Bridge-24V Dc-Mic ,Make= Any Make , Motor For Lt Main Hydraulic 415Volt 3 Ph-40Hp ,Make= Any Make , Fuse , Semi Conductor Fuse 1400 Amp(Mill Vfd) ,Make= Bussmann , Semi Conductor Fuse 900 Amp (Batch M/C ) ,Make= Bussmann , Semi Conductor Fuse 315 Amp (Main Cane Carr.) ,Make= Bussmann , Semi Conductor Fuse 315 Amp (Juice Sulphitor) ,Make= Bussmann , Semi Conductor Fuse 315 Amp (Pan Circulator) ,Make= Bussmann , Semi Conductor Fuse 20 Amp ( B=C Grain ) ,Make= Bussmann , 132Kv Switchyard , Vector Surge Relay, Mrg2-1Hrd,Make:C&S ,Make= C&S , Sf6 Breaker Pole, 132 Kv ,Make= Abb , Post Insulator For 132Kv Line,90Kn ,Make= Abb , Lighting Arrestor For 132Kv Grid ,Make= Abb , Out Door Ct For V132kv Line Ctr 200/1Amp ,Make= Abb , Out Door Pt For 132Kv Line Ptr 132Kv/Rt3/110V/Rt3 ,Make= Abb , Copper Earthing Strip Size:-50Mmx5mm,Make= Any Make , Chemical Earthing Electrode 10 Feet Length ,Make= Any Make , Carbon Brush , Techo Generator ( As Per Sample ) ,Make= Any Make , Laveler & Chopper-40X20x40/ 15Me ,Make= Any Make , Fibrizor-40X20x40/ C80x ,Make= Any Make , Lighting Materials , Elcctronic Ignitor (70W/150W/400W)-Bajaj ,Make= Bajaj , Hpsv Lamp 400Watt-Bajaj ,Make= Bajaj , Hpsv Bellast 400 Watt(Type-Bjhbi/Mbi)-Bajaj ,Make= Bajaj , Hpsv Bellast 400 Watt-Bajaj ,Make= Bajaj , Hpsv Bellast 250 Watt-Bajaj ,Make= Bajaj , Hpsv Lamp 250 Watt-Bajaj ,Make= Bajaj , Hpsv Bellast 250 Watt-Bajaj ,Make= Bajaj , Capacitor3.15 Mfd-Bajaj ,Make= Bajaj , Capacitor2.5 Mfd-Bajaj ,Make= Bajaj , Fluorescent Tube Light 36 Watt-Bajaj ,Make= Bajaj , Hpmv Lamp 250 Watt ,Make= Bajaj , Helozen Lamp 500 Watt ,Make= Bajaj , Helozen Lamp 1000 Watt ,Make= Bajaj , Helozen Lamp Fitting 500 Watt ,Make= Bajaj , Helozen Lamp Fitting 1000 Watt ,Make= Bajaj , Asr Panels, Fan-Dia 380 Mm,3Ph,0.18Kw ,1400 Rpm-Marathon ,Make= Marathon , Vfd Panel Cooling Fan , Auxalary Fan,Make= Abb , Cooling Fan For Panel ,Make= Abb , A Batch M/C Power Module Cooling Fan,Make= Abb , Mill Vfd Module Cooling Fan Set ( Double ) ,Make= Abb , Techo Genrator For Dc Batch M/C Motor ,Make= Any Make , Power Plant Electrical Requirment , Emergency Push Button Mushroom Head(1No+1Nc) ,Make= Any Make , Hand Lamp Set 230V ,Make= Any Make , Cable Flexible 2 Core* 1.5 Mmsq Copper ,Make= Any Make , Mcb & Fuses , Hrc Fuse 200 A, Semiconductor,Make= Bussmann , Hrc Fuse 315 A, Semiconductordin-1 ,Make= Bussmann , Hrc Fuse 630A, Semiconductor Size Din -2 ,Make= Bussmann , Hrc Fuse 160 A, Semiconductorsize Din-000 ,Make= Bussmann , Hrc Fuse , Semiconductor 1000 Adin-3 ,Make= Bussmann , Hrc Fuse 63, Semiconductor, Din-000 ,Make= Bussmann , Selectror Switch, Type Spp29b,25Amps ,Make= Any Make , Selectror Switch,Type; 1S260, 10Amps ,Make= Any Make , Potentio Meter 3 Pin ,Make= Any Make , Contactor Relay And Other Electric Material , Electronic Timercat Id:12Sdt0 Supply 240V Timing: 3Sec-120 Sec, Star-Delta ,Make= Any Make , Contactor Model: 3Ts35 00-0A..8K,Ac-3,40Amp, Coil Voltage -110Vac ,Make= Any Make , Push Button – No Element, Teknic Code:Sf ,Make= Teknic , Push Button – Nc Element, Teknic Code:S2 ,Make= Teknic , Mushroom Actuator (Plastic), Teknic Code P2amlkb4 ,Make= Teknic , Flush Switch Actuator Teknic Code: P2af3 ,Make= Teknic , 2W/2W(102)(Pdc) Enclosure, Colour :Ral 7032/Black, Teknic Code:2006C13 ,Make= Teknic , Ammeter Selector Switch, 61325 ,Make= Salzer , Voltmeter Selector Switch 6A, 61312 ,Make= Salzer , Voltmeter 0-500V, 96X96mm, Mtr500d1d096and ,Make= Ae , Ammeter Ct Operated 96X96mm ,Make= Ae , Indicator Red – Eilr240a, 230V ,Make= Esbee , Indicator Yellow – E1ly240a, 230V ,Make= Esbee , Indicator Blue – Eilb240a, 230V ,Make= Esbee , Indicator Amber – Eila240a, 230V ,Make= Esbee , Indicator Green – Eilg240a, 230V ,Make= Esbee , Copper Lugs Pin Type Size 1.5 Mm Square ,Make= Dowells , Copper Lugs Pin Type Size 2.5 Mm Square ,Make= Dowells , Copper Lugs Pin Type Size 4 Mm Square ,Make= Dowells , Copper Lugs Pin Type Size 6 Mm Square ,Make= Dowells , Copper Lugs Pin Type Size 10 Mm Square ,Make= Dowells , Copper Lugs U Type Size 2.5 Mm Square ,Make= Dowells , Copper Lugs Ring Type Size 1.5 Mm Square ,Make= Dowells , Copper Lugs Ring Type Size 2.5 Mm Square ,Make= Dowells , Copper Lugs Ring Type Size 4.6 Mm Square ,Make= Dowells , Copper Lugs Ring Type Size 10 Mm Square ,Make= Dowells , Copper Lugs Ring Type Size 16 Mm Square ,Make= Dowells , Copper Lugs Ring Type Size 25 Mm Square ,Make= Dowells , Copper Lugs Ring Type Size 35 Mm Square ,Make= Dowells , Copper Lugs Ring Type Size 50 Mm Square ,Make= Dowells , Copper Lugs Ring Type Size 70 Mm Square ,Make= Dowells , Copper Lugs Ring Type Size 45 Mm Square ,Make= Dowells , Ammeter Ct, Operated-250/5 A Size – 96Mmx96mm ,Make= Any Make , Ct Shorting Terminals Size-6 Mm Square, Catdm4 ,Make= Elemex , Ct Shorting Terminals Size-6 Mm Square, Kutsd6 ,Make= Elemex , Din Channel ‘G’ Type In Meter ,Make= Any Make , Din Channel ‘C’ Type In Meter ,Make= Any Make , Single Pole Mcb C-8 Amp ,Make= Any Make , Single Pole Mcb C-10 Amp ,Make= Any Make , Single Pole Mcb C-16 Amp ,Make= Any Make , Double Pole Mcb C-4 Amp ,Make= Any Make , Double Pole Mcb C-6 Amp ,Make= Any Make , Double Pole Mcb C-10 Amp ,Make= Any Make , Double Pole Mcb C-16 Amp ,Make= Any Make , Three Pole Mcb C-32 Amp, ,Make= Any Make , Three Pole Mcb C-40 Amp ,Make= Any Make , Three Pole Mcb C-63 Amp ,Make= Any Make , Four Pole Mcb C-63 Amp ,Make= Any Make , Four Pole Elcb C-63 Amp, Leakage Current 100 M ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 10 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 16 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 25 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 35 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 50 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 70 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 95 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 120 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 150 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 185 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 240 Mm Square ,Make= Any Make , Aluminium Lugs Of Ring Type Size – 300 Mm Square ,Make= Any Make , Becktol Red Varnish In Ltr. ,Make= Dr. Beek , Insulating Varnish In Ltr. ,Make= Dr. Beek , Cotton Tap 1” X 30 Meter In Rolls ,Make= Any Make , Empire Tap 1” X 30 Meter In Rolls ,Make= Any Make , Ht Tap In Rolls ,Make= Any Make , Water Proof Self Fusing Silicon Rubber Tao Electrical In Rolls ,Make= Any Make , Pvc Tap (Red, Yellow, Blue & Black) ¾” X 6.6 Meter ,Make= Any Make , Pin Type Lamp Holder ,Make= Any Make , 3 Position Sensor Switch, Hg-121C, 16 Amps. ,Make= Any Make , Isolated Converters, 9000U Series ,Make= Masibus , Isolated Converters, S1sd-1Ai-2U ,Make= Pepperl Plus Fuchs , Isolated Converters, S1sd-1Ai-1U ,Make= Pepperl Plus Fuchs , Proximity Sensor For Batch M/C(Sw-4051-P0d1-B30(Pnp- N0), 10-30V Dc, Sn Dist: 15Mm, Load: 400Ma ,Make= Any Make , Carbon Brush Holder For 200 Kw Crompton Make Motor For Carbon Brush 40X40x20 ,Make= Any Make , Carbon Brush For Air Blower In Set ,Make= Bosch , Soldering Iron 60 Watt (Round And Pointed Flat- Tip) ,Make= Any Make
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
8.
Agriculture #9488496 Technical Bid
Tender For Supply Of Electrical Material For Sugar Mill - GPR CUM SYNCHRONISING PANEL 2 AMMTER[DIGITAL AC AMMTER,96X96mm,ACCURACY:0.5,CTR:2500/1A,AUX. SUPPLY 110VOLT DC,3 PHASE,3LINE DISPLY 3 VOLTMETER[ DIGITAL AC AMMTER,96X96mm,ACCURACY:0.5,Range:0-15kv PT-Programable, PTR:11KV/110V MAKE:ELMEASURE 4 MFM[DIGITALMFM METER,96X96mm,CTR 2500/1A, PTR 11KV/110V, AUX SUPPLY 110VOLT DC 5 FREQUENCY METER[DIGITAL FREQUENCY METER 96X96mm,Input110volt AC,AUX SUPPLY110VOLT DC,CL:0.2,RANGE 45-50HZ 6 MW Tranducer[3phase,4wire,3element,MW tranducer,aux. supply 110volt DC, CTR2500/1A,MAKE: 7 IVT[110V/110V,50VA,SINGAL PHASE,CL:1.0,OVF1.2 Continous make:pragati 8 Breker control switch[spring return to neutral 2trip,2close,32amp,110V DC, Contact with pistal grip handle] make:SWITRON 9 SEMAPHORE[110V DC,48mm Dia make:DAV{deepl} 10 AUTO/MANUAL SEL SWITCH[1Pole,2way with off,16A,Stay put ,name plate:AUTO-OFF-MANUAL,110 DC,KNOB TYPE MAKE:SWITRON 11 LIVE/DAD[1Pole,2way with off,16A,Stay put ,name plate:LIVE-OFF-DAD,110 DC,KNOB TYPE MAKE:SWITRON 12 Coarse/OFF/FINE SWITCH, 8 pole,2position with OFF,32A ,STAY PUT,NAME PLATE:COARSE/OFF/FINE ,110V DC,6 CONTACT IN FINE, 2 CONTACT IN COARSE, PISTOL GRIP HANDLE 13 BREAKER SELECTOR SWITCH,1 POLE,6WAY WITH OFF,32AMP,STAY PUT,110V DC,KNOB TYPE[ MAKE:SWITRON] 14 AUX. CONTACTORS[110V DC,2NO+2NC BASE WITH ADD ON BLOCK 2NO+2NC MAKE:SIEMENS TYPE:3RH2911 1HAO2 15 ILLUMINATION LAMP [INDICATION LAMP RED, GREEN,YELLOW,BLUE]DIA22.5mm, 110volt DC,LED TYPE MAKE:TEKNIC 16 REVERES REACTIVE POWER RELAY TYPE-XP2R,CT I/P:1AMP,PT I/P:110V AC,DIN MOUNTING, AUX SUPPLY:110V DC/2C/O CONTACTS MAKE:WOODWARD 17 ROTER EARTH FAULT RELAY TYPE:XR1, AUX.VOLT:19-390V DC,50HZ,CONTACTS2C/O,MOUNTING:DINRAIL MAKE:WOODWARD 18 vector surge relay 19 11KV ,3CORE,300Sqmm,XLPE,STEEL ARRMOUD ALUMINIUM CABLE 20 3PHASE 110KW 1440RPM FRAME SIZE 190 VOLTAGE 415 VAC MOTOR 21 NUMERICAL RELAY 22 POST INSULATOR FOR 132KV OUTDOOR TYPE SWITCH YARD 90KN 23 CUMMINS DIESEL GENERATOR SPARTE PARTS 24 DC VOLTAGE DPM RATED I/P:500V DC, AUX SUPPLY:40-300V~45VA MODEL:RISH Eine+voltage 25 AVR MODULE 26 HMI 27 DC VOLTAGE DPM RATED I/P:75mV DC, AUX SUPPLY:40-300V~45VA MODEL:RISH Eine+voltage 28 3PHASE VOLTAGE DPM,I/P:100-500VL-L,50-60HZ, PTR:11KV/110V 29 TRIPPING & CLOSING COIL ASSEMBLY 110V DC, FOR ABB VCB VD4 11kv HT BRAKER 30 BREAKER POLEABB VCB, 11KV HT BRAKER 31 AUXALARY CONTACT ASSEMBLY FOR ABB VCB VD4 H.T. BRAKER, VD4 32 SPRING CHARGING LIMIT SWITCH 11 KV, H.T. BREAKER, VD4 33 TEST SERVICE POSITION LIMIT SWITCH 11KV, HT, BREAKER VD4 34 SPRING CHARGING MOTOR ASSEMBLY 240VLT AC FOR ABB VCB VD4 H.T. BREAKER 11 KV 35 INDICATION LAMP RED ,GREEN,BLUE,AMBER,WHITE,LED TYPE,110V DC,22.5mm DIA MAKE:ESBEE 36 TNC SWITCH 25A,2NO+2NC SPRING RETURN MAKE :SALZER 37 MASTER TRIP RELAY[86],110V DC AUX. SUPPLY WITH 4NO+3NC CONTACTS,FLUSH MOUNTED MAKE:ABB 38 CURRENT TRANSFORMER EPOXY RESIN CAST . 3 CORE -CT -CORE 1 -CL0.5,10BA,CORE 2-CL5P20,10BA ,CORE 3 CL PS VK>=3RCT<5OHAM CT RATIO 25/1/1/1 FOR 11KV 26.3 KA FOR 3 SEC 39 POTENSIAL TRANSFORMER 11KV/RT3/11O/RT3,30VA,CL-0.5 40 SELECTOR SWICH,6AMP,1POLE,2WAY WITHOUT OFF MAKE SALZER 41 132KV SWITCHYARD 42 VECTOR SURGE RELAY, MRG2-1HRD,MAKE:C&S 43 SF6 BREAKER POLE, 132 KV 44 POST INSULATOR FOR 132KV LINE,90KN 45 LIGHTING ARRESTOR FOR 132KV GRID 46 OUT DOOR CT FOR V132KV LINE CTR 200/1AMP 47 OUT DOOR PT FOR 132KV LINE PTR 132KV/RT3/110V/RT3 48 copper earthing strip size:-50mmx5mm 49 chemical earthing electrode 10 feet length 50 Cane Unloader 51 Resistance for LT Motor4.5 KW 52 Brake /Thruster-415 volt 3 ph 53 Motor for Grab-415 volt 3 ph-15HP 54 Motor for LT Slipring 415Volt 3 ph- 4.5 KW 55 Rectifier Bridge-24V DC-MIC 56 Motor for LT Main hydraulic 415Volt 3 ph-40HP 57 MCCMILL HOUSE 58 Control transformer 415V/230V 3.0KVA (2.5% & 5% TAP ON PRIMERY SIDE) AE/KAPP/KALPA 59 CARBON BRUSH 60 Techo Generator ( As Per Sample ) 61 Cane Unloader 25x15x8 mm 62 LAVELER & CHOPPER-40x20x40/ 15ME 63 FIBRIZOR-40x20x40/ C80X 64 LIGHTING MATERIALS 65 Elcctronic Ignitor (70W/150W/400W)-Bajaj 66 HPSV LAMP 400WATT-Bajaj 67 HPSV BELLAST 400 WATT(TYPE-BJHBI/MBI)-Bajaj 68 HPSV BELLAST 400 WATT-Bajaj 69 HPSV BELLAST 250 WATT-Bajaj 70 HPSV LAMP 250 WATT-Bajaj 71 HPSV BELLAST 250 WATT-Bajaj 72 Capacitor3.15 MFD-Bajaj 73 Capacitor2.5 MFD-Bajaj 74 Fluorescent Tube Light 36 Watt-Bajaj 75 HPMV LAMP 250 WATT 76 HELOZEN LAMP 500 WATT 77 HELOZEN LAMP 1000 WATT 78 HELOZEN LAMP FITTING 500 WATT 79 HELOZEN LAMP FITTING 1000 WATT 80 ASR PANELS, FAN-Dia 380 mm,3ph,0.18KW ,1400 RPM-MARATHON 81 VFD PANEL COOLING FAN 82 AUXALARY FAN 83 COOLING FAN FOR PANEL 84 A BATCH M/C POWER MODULE COOLING FAN 85 MILL VFD MODULE COOLING FAN SET ( DOUBLE ) 86 TECHO GENRATOR FOR DC BATCH M/C MOTOR 87 MCC AND LIGHTING DB 88 MCB 1 POLE 2 AMP 89 MCB 1 POLE 4 AMP 90 MCB 2 POLE 20 AMP 91 MCCB 125 AMP3 POLE 92 MCCB 160 AMP3 POLE 93 FUSE 94 SEMI CONDUCTOR FUSE 1400 AMP(MILL VFD) 95 SEMI CONDUCTOR FUSE 900 AMP (BATCH M/C ) 96 SEMI CONDUCTOR FUSE 315 AMP (MAIN CANE CARR.) 97 SEMI CONDUCTOR FUSE 315 AMP (JUICE SULPHITOR) 98 SEMI CONDUCTOR FUSE 315 AMP (PAN CIRCULATOR) 99 SEMI CONDUCTOR FUSE 20 AMP ( B=C GRAIN ) 100 POWER PLANT ELECTRICAL REQUIRMENT 101 Emergency Push Button mushroom head(1NO+1NC) 102 Hand Lamp set 230v 103 Cable Flexible 2 core* 1.5 mmsq Copper 104 MCB & FUSES 105 HRC Fuse 200 A, SemiConductor 106 HRC Fuse 315 A, SemiConductorDIN-1 107 HRC Fuse 630A, SemiConductor size DIN -2 108 HRC Fuse 160 A, SemiConductorsize DIN-000 109 HRC Fuse , SemiConductor 1000 ADIN-3 110 HRC Fuse 63, semiconductor, DIN-000 111 selectror switch, Type SPP29B,25Amps 112 selectror switch,Type; 1S260, 10Amps 113 Potentio Meter 3 pin 114 CONTACTOR RELAY AND OTHER ELECTRIC MATERIAL 115 Electronic TimerCat ID:12SDT0 supply 240V timing: 3sec-120 sec, star-Delta 116 Contactor Model: 3TS35 00-0A..8K,AC-3,40Amp, coil voltage -110VAC 117 Push Button – No Element, TEKNIC Code:Sf 118 Push Button – NC Element, TEKNIC Code:S2 119 Mushroom Actuator (Plastic), TEKNIC Code P2AMLKB4 120 Flush Switch Actuator TEKNIC Code: P2AF3 121 2W/2W(102)(PDC) Enclosure, Colour :RAL 7032/Black, TEKNIC Code:2006C13 122 Ammeter Selector Switch, 61325 123 Voltmeter Selector Switch 6A, 61312 124 Voltmeter 0-500V, 96X96mm, MTR500D1D096AND 125 AMMETER CT OPERATED 96X96mm 126 Indicator Red – EILR240A, 230V 127 Indicator Yellow – E1LY240A, 230V 128 Indicator Blue – EILB240A, 230V 129 Indicator Amber – EILA240A, 230V 130 Indicator Green – EILG240A, 230V 131 Copper Lugs Pin Type Size 1.5 mm Square 132 Copper Lugs Pin Type Size 2.5 mm Square 133 Copper Lugs Pin Type Size 4 mm Square 134 Copper Lugs Pin Type Size 6 mm Square 135 Copper Lugs Pin Type Size 10 mm Square 136 COPPER LUGS U TYPE SIZE 2.5 mm Square 137 Copper Lugs Ring Type Size 1.5 mm Square 138 Copper Lugs Ring Type Size 2.5 mm Square 139 Copper Lugs Ring Type Size 4.6 mm Square 140 Copper Lugs Ring Type Size 10 mm Square 141 Copper Lugs Ring Type Size 16 mm Square 142 Copper Lugs Ring Type Size 25 mm Square 143 Copper Lugs Ring Type Size 35 mm Square 144 Copper Lugs Ring Type Size 50 mm Square 145 Copper Lugs Ring Type Size 70 mm Square 146 Copper Lugs Ring Type Size 45 mm Square 147 Ammeter CT, Operated-250/5 A Size – 96mmx96mm 148 CT Shorting Terminals Size-6 mm Square, CATDM4 149 CT Shorting Terminals Size-6 mm Square, KUTSD6 150 DIN Channel ‘G’ Type in Meter 151 DIN Channel ‘C’ Type in Meter 152 Single Pole MCB C-8 AMP 153 Single Pole MCB C-10 AMP 154 Single Pole MCB C-16 AMP 155 Double Pole MCB C-4 AMP 156 Double Pole MCB C-6 AMP 157 Double Pole MCB C-10 AMP 158 Double Pole MCB C-16 AMP 159 Three Pole MCB C-32 AMP, 160 Three Pole MCB C-40 AMP 161 Three Pole MCB C-63 AMP 162 Four Pole MCB C-63 AMP 163 Four Pole ELCB C-63 AMP, Leakage Current 100 M 164 Aluminium Lugs of Ring Type Size – 10 mm Square 165 Aluminium Lugs of Ring Type Size – 16 mm Square 166 Aluminium Lugs of Ring Type Size – 25 mm Square 167 Aluminium Lugs of Ring Type Size – 35 mm Square 168 Aluminium Lugs of Ring Type Size – 50 mm Square 169 Aluminium Lugs of Ring Type Size – 70 mm Square 170 Aluminium Lugs of Ring Type Size – 95 mm Square 171 Aluminium Lugs of Ring Type Size – 120 mm Square 172 Aluminium Lugs of Ring Type Size – 150 mm Square 173 Aluminium Lugs of Ring Type Size – 185 mm Square 174 Aluminium Lugs of Ring Type Size – 240 mm Square 175 Aluminium Lugs of Ring Type Size – 300 mm Square 176 Becktol Red Varnish in Ltr. 177 Insulating Varnish in Ltr. 178 Cotton Tap 1” X 30 Meter in Rolls 179 Empire Tap 1” X 30 Meter in Rolls 180 HT Tap in Rolls 181 Water Proof Self Fusing Silicon Rubber Tao Electrical in Rolls 182 PVC TAP (Red, Yellow, Blue & Black) ¾” X 6.6 Meter 183 Pin Type Lamp Holder 184 3 Position Sensor Switch, HG-121C, 16 Amps. 185 Isolated Converters, 9000U SERIES 186 Isolated Converters, S1SD-1AI-2U 187 Isolated Converters, S1SD-1AI-1U 188 Proximity Sensor for Batch M/C(SW-4051-P0D1-B30(PNP- N0), 10-30V DC, SN DIST: 15mm, Load: 400MA 189 Carbon Brush Holder for 200 KW Crompton Make Motor for Carbon Brush 40X40X20 190 Carbon Brush for Leveller/Chopper Motor, KE14Z3 294285, 40X40X20 191 Carbon Brush for Chopper Motor M15E, 40X40X20 192 Carbon Brush for Cane Unloader Slip Ring Motor, P1903, 20X15X10 193 Brass Carbon Brush Holder Assembly for C.G.L Frama Size-132 (1 Set=3 No.) in Set 194 Carbon Brush for Air Blower In Set 195 Soldering Iron 60 Watt (Round and Pointed Flat- Tip) 196 Current Collector for Cane Unloaded 197 Complete Food Switch, 2 Step Type 198 Foot Switch Element 1 No-1NC
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
9.
Agriculture #9485889 Technical Bid
Bridge Unloader , Bridge Unloader , 1. Design, Manufacturing And Supply Of Heavy Duty Out Door Bridge For Sugar Mill Plant Cane Unloading Conforming To Is:807-1976 & Is:3177- 1977 Fabricated From M.S. Plate Section Conforming To Is:226/2062 Steel In Box Type Design With And Carriage Fitted With Wheel Of Fusion Welded Having L Type Bearing Housing For Long Travel (Lt) Wheel Assemblies Having Span-22.00 Mtrs Capacity -05Ton Swl Along With Dismantling Of Old Existing Bridge And Erection And Commissioning Of New Bridge Old Existing Cross Travel Trolley Will Be Used. Type Of Bridge-M.S. Plate Fabricated Box Type Span-22.00 Mtrs, Unloading Capacity -05 Ton Swl 2. Techincal Specification:-Type Of Bridge -Box Type (M.S. Plated Fabricated), Capacity-05 Ton Swl, Unloading Capacity -80 To 100 Ton Cane/Hr, Utility-Sugar Cane Handling, Height Of Top Of Top Rail From Ground-10.00 Mtrs, Height Of Lift-12.50 Mtrs, Wirerope19mm, 6/36 Construction Fibre Wire, Long Travel Speed -23-25 Meter/Minute, Box Side Plate Height-1250Mm, Box Side Plate Thickness8mm, Top & Bottom Plate Thickness-Top Plate-12Mm Thick, Bottom Plate-10Mm Thick, Top & Bottom Plate Width-500Mm, Baff /Stiffener Plate Spacing -750Mm, Baffle/Stiffener Plate Thickness-8 Mm. , 3. End Carriage:- Length-5000Mm, Height-450Mm, Centre Distance For End Carriage Wheel-4500Mm,Centre Distance Of Trolley Wheel As Per Previous Trolly. 4. Long Travel Mechanism:- Size Of Rail Top At Long Travel- Width-60Mm, Height-25Mm, Size Of Rail Section At Cross Travel-Width-60Mm, Hight25mm. 5. Electric Motors For Long Travel Drive 5.3Hpx960 Rpm Rating S4 Duty, Qty-02 Nos. 6. Gear Box For Long Travel:- Type Helical,Model-Hb-350, Ratio-40:1, Service Factor-Greater Than 2 On Installed Power, Qty-02 No 7. Coupling For Long Travel Drive:- Type Geared Type Half Gear Model103 8. Breaks:- Thruster-Electro Hydraulic Thruster 18 Kg/Cm², Dia-6, Qty 02 No., Floating Shaft Dia/Length-70Mm/800Mm-1000Mm 9. Wheel:- Dia Meter-420Mm, Bearing-22218 Skf/Fag Make, Housing L Type, Qty-04 Nos , Note:- (I)Fabrication Will Be Done Using Prime Plates And Sections And Using Mig, Welding Process. (Ii)Only Tack Welding Will Be Done By Electrode Using Arc Welding(Iii) Parallelist Of The Cross Travel Rails/Square Bar, Diagonals, Deflection Of The Bridge & Trolley Will Be Accurate And Confirming To Standard And Best Engineering Practices. (Iv) Bridge Must Be Two Coated By Red Oxide Metal Primer And Two Coats Of Golden Yellow Colour. 11. Electric Panel For New Bridge, Resistance Boxes For Bridge Motors, Control Cabin, 12. Electric Wires, Main Switch Push Button Control & Cable Trolleys For Complete 13. Unloader. 14. Dismantling Of Old Trolly And All Its Accessories And Erection & Commission Of New Trolly, Frame And Fitting Of All Old Spares Ie. Rope, Drum,Thruster Break Etc Complete Testing And Trail. , Scope Of Work 1. Supply Of Above Mentioned Bridge On For Basis To Mill Site. 2. Dismantling Of Old Unloader. 3.Erection Of New Unloader Bridge With Old Trolley & Grab With Complete Electric Work With New Electrical Panel For Bridge And All Electrical Panel For Trolley & Grab. All Wiring Should Be New & Standard Isi Make
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 4
Uttar Pradesh View Result →
10.
Agriculture #9483550 Technical Bid
Supply Of General Electrical Items For Season 2025-26 , Description , Remote Bell , Tong Tester Meco Make 1000 Amp A.C./D.C. , Manual Control Fan Regulater 4 Steps, Single Module , Mcb Din Rail Channel, 35Mm Width , Air Heater Heating Element 1 Meter Single , Amp.Meter 4X4 ,0 - 600 Amp Ctr 600/5 , Amp.Meter 4X4 ,0 - 800 Amp Ctr 800/5 , Amp.Meter 4X4 ,0 - 1000 Amp Ctr 1000/5 , Amp.Meter 96X96mm , Ctr 100/5 , Amp.Meter 4X4 ,0 - 50 Amp Ctr 50/5 , Amp.Meter 4X4 ,Direct 0-10 Amp & 0-20 Amp , Amp.Meter 96X96mm, 150/5 , Amp.Meter 4X4 , 300/5 , Amp.Meter 4X4 , 400/5 , Ct 50/5,60/5,100/5,150/5,300/5,400/5,600/5,500/5 , Ct Ae Make 1000/5 , Piller Assambly For 800 Amp , Ct630/800 Amp For Acb , Operating Handle On/Off 800 Amp , Dn 1 Release , Cable Tie 4 , Cable Tie 6 , Soldring Paste , Change Over Switch 400 Amp In Ss Hpl /Sucomake , Indicator Led 220 Volt Red , Volt.Meter 4 0 - 500 Volt , Contactor 6 Way 30 Amp. L&T/Schneider/Switch Gean , Amp. Meter 0 - 15 Amp 4 , Amp. Meter 0 -160 Amp 4150/5 A/E / Rc , Power Contactor 3Ta22 230 Volt , Mcb Single Pole 32 Ampschneider /L&T / Abb , Mcb Double Pole 16 Amp Schneider /L&T / Abb , Mcb Double Pole 20 Amp Schneider /L&T / Abb , Mcb Dboule Pole 32 Amp Schneider /L&T / Abb , Mcb Triple Pole 16 Amp Schneider /L&T / Abb , Mcb Triple Pole 20 Amp Schneider /Havells , Mcb Triple Pole 32 Amp Schneider /Havells , Mcb Triple Pole 63 Amp Schneider /Havells , Distribution Board 12 Way Spn (Mcb Box) Schneider /Havells , Digital Energy Meter 3 Phase 4 Wirectr 200/5 L&T , Transfarmer 1 Kva 230 Volt , Sambersibleflexible Flat Copper Cable (35Mm X3 Core) , Change Over Switch 800 Amp 4 Pole Hewlls Make L&T , Change Over Switch 400 Amp 4 Pole Hewlls Make L&T , Pvc Copper Cable660/1100 Volt For Unloder 1.5Mm 16 Core , Carbon Bush 50X32x32 Usha/Bosch , Volt Meter 4 0-100 Volt A/E , Oil Resistance Box 250 Hp Rb450 Ra 146 Oil Immersed , Dinodrive Electronic Controllereddy Current Control , Pvc Copper Flat Sambersible Cable 6Mm 3 Core , Electronic Blower Wolf Make /Eastman , Spray Gun H.Duty , Digital Rpm Meter 0-500 Rpm Wantran , Fuse Base Nsh 20 Amp , Indicating Lamp 240 Volt Complete Hack/Jigo , Push Button Element 1 No , Push Button Element 1 Nc , Mcb Box 4 Pole L&T , Indicating Lampr Y B , Piston Drill Machine Complete Wolf Make Bosh , Hand Lamp , Push Button Element 1 No+1Nc Teknic , Ct 30/5 , Pvc Coolling Fan 5 Hp 1440 Rpm Ke Make Simenss , Pvc Coolling Fan 7.5 Hp 1440 Rpm Ke Make Simenss , Pvc Coolling Fan 10 Hp 1440 Rpm Ke Make Simenss , Motor Fan Cover Ke Make 5 Hp 1440 Rpm Ke/ Simenss , Motor Fan Cover Ke Make7. 5 Hp 1440 Rpmke/Simenss , Motor Fan Cover Ke Make 10 Hp 1440 Rpm Ke/Simenss , Allu. Imhibiting Crosen Cable Compound Ke/Simenss , Hydraulic Cable Crimpingmachine Upto 400 Mm Complte Taparia , Hydrauliccable Crimping Machine Upto 95 Mm Compltetaparia , P T Bulb 24 Volt , Slipring 90 Hp 67 Kwframe Size Lcw 250 , Slipring250 Hpframe Size Rw 10539 , Slipring250 Hp1480 Rpm , Carbon Brush Holder90hp Lcw 250 , Carbon Brush Holder150 Kw Rw 10539 , Carbon Brush Holder370kw , Spare For Oil Immersed Star Delta Starter , A- Moving Arching Contact With Guttka , B- Fix Finger Contact Big , C- Fix Finger Contact Small , Amp Meter 72X72mm 30/5 , Amp Meter 72X72mm 100/5 , Cannector Element 35Mm , Connector Element 50Mm Jigo/Rc , Connectorelement 70Mm , Electronic Timer 415 Volt 36-120 Secd. Simenss /L&T , G.I.G.O.L. Varnised Crodium Nut & Bolt With Washers , ………………………………Do…………………………….12X50mm , ………………………………Do…………………………….10X50mm , ………………………………Do…………………………….8X50mm , ………………………………Do…………………………….6X50mm , ………………………………Do…………………………….12X65mm , ………………………………Do…………………………….10X65mm , ………………………………Do…………………………….8X65mm , ………………………………Do…………………………….6X65mm , ………………………………Do…………………………….12X75mm , ………………………………Do…………………………….10X75mm , ………………………………Do…………………………….8X75mm , ………………………………Do…………………………….6X75mm , Drill Machineh.Duty Bosch , V.S.F. Treding Tape 1/4 , V.S.F. Treding Tape 1/16 , V.S.F. Treding Tape 3/8 , V.S.F. Treding Tape 1/2 , V.S.F. Treding Tape 5/8 , V.S.F. Treding Tape 3/4 , Control Transfarmer Input 415 Volt A.C. Output 230 Volt D,.C. 0.5 Kva Wnton,Gromption , Geyser 25 Ltr Gromption/Havells , Change Over Switch 250 Amp Ss Havells/L&T , Cooling Fan 75 Hp Bharat Bijli/Simenss , Cooling Fan 60 Hp Bharat Bijli/Simenss , Cooling Fan 40 Hp Bharat Bijli/Simenss , Cooling Fan 15 Hp Bharat Bijli/Simenss , Cooling Fan Cover 75 Hp Ke Make Simenss/Bharat Bijli/Kirloskar , Cooling Fan Cover 60 Hp Ke Make Simenss/Bharat Bijli/Kirloskar , Cooling Fan Cover 10Hp Ke Make Simenss/Bharat Bijli/Kirloskar , Terminal Plate 75 Hp Ke Makesimenss/Bharat Bijli/Kirloskar , Terminal Plate 7.5 Hp Ke Make Simenss/Bharat Bijli/Kirloskar , Terminal Box 15 Hp 160 Kh Simenss/Bharat Bijli/Kirloskar , Terminal Box 7.5 Hp Kh 132Simenss/Bharat Bijli/Kirloskar , Carbon Brush 16X32x38 Jyoti/Bosch , Carbon Bush 10X22x38 , Carbon Brush 20X40x50 , Carbon Holder Jyoti Make Jyoti , Copper Rod 1.5X18,Long , G.I.G.O.L. Varnised Crodium Nut & Bolt With Washer---- , …………………………..Do………………………….16X50 , …………………………..Do………………………….16X75 , …………………………..Do………………………….18X50 , …………………………..Do………………………….18X75 , …………………………..Do………………………….15X50 , …………………………..Do………………………….15X75 , …………………………..Do………………………….15X26 , …………………………..Do………………………….12X25 , …………………………..Do………………………….10X100 , …………………………..Do………………………….12X100 , …………………………..Do………………………….10X20 , …………………………..Do………………………….10X25 , …………………………..Do………………………….8X25 , …………………………..Do………………………….6X25 , Mcb Box3 Pole Havells /Anchor , Hrc Fuse Tia 32 Amp Simens/L&T , Hrc Fuse Tis 63 Amp Simens/L&T , Terminal Plate 60 Hp Ke/Simens/Bhart Bijli , Cooling Fan 3 Hp , Slipring Resistance Box 3 Step 7.5 Hp R V 140-170 Volt , Slipring Resistance Box 3 Step 10 Hp R V 206 Volt , Highvoltage Syenthetic Insulation Electric Make Suitable For , Upto 33 Kv Isi 15652 Thk 12Mm Length 1X2 Mtr , Spare For 300 Amp Ocb------ , A- Moving Arching Contactl Typetulip/ , B- V Bar , C- Fix Arching Contact , D-Fix Moving Contact , Amp.96X96mm Direct 0-15,Amp , Ct 90/5Ae/L&T , Infrared Thermo Meter Max.Output1mm 670 Mm Lenth Ledger Type , Ct 120/5 Ae/L&T , Ct 180/5 Ae/L&T , Indicating Light Lead Red 220Voltjigo/Ae , Terminal Plate 10 Hp , Overload Reley 25-40 Amp Simens , Stater For 150 Hp /110 Kw Sliparing Motor With Housing , Slipring Resistence Box 3 Step 150 Hp R V 330 Volt Oil Immersed , Archute 800 Ampl&T , Amp.Meter 120/5 Ae/Rc/Jigo , Amp.Meter 180/5 Ae/Rc/Jigo , D.Spanner Set Taparia , Ring Spanner Set , Box Spanner Set , Contimoty Tester With Cell , Indicating Bulb 7 Watt 20 Volt , Change Over Switch Onload 630 Amp In Ss 4 Pole Hewlls/Semens , Auxillary Contanct Block 3Ta24/3Ta28 , Hexa Blead Fram H.Duty With Blaed Bosch , Nut & Bolt With Double Washer 1/8X1(1 Sut) , Nut & Bolt With Double Washer 1/8X2(1 Sut) , Nut & Bolt With Double Washer 1/12X1(1.5 Sut) , Nut & Bolt With Double Washer 1/12X1-1/2(1.5 Sut) , H.Duty Batterycharger With Incloser , Musroom Push Bottan Red , H.Duty Fut Switch Teknic/Jigo , Fut Switch Element L&T/Switch , Water Resistance Box For 300 Hp , Oneway Switchhavells/Anchor , Electronic Regulater Dinospeed Ed Currenthavells/Anchor , Digital Magger Meco Make Modle-Dit 99 C , Clamp Meter Modle-3690 Rishi/Mecho , Fibre Glass Tape1” , Empire Tape 3/4 , C.R.C.2.26 Spray Bottle, 400 Gram Ml , Fibreglass Tape 3/4 , Ferrule 25Mm2,0-9/0-Mm2 , Copper Strip 2” Widthx1/4 , Cable Gland 3X240mm , G.I. Wire 4 Swg , Cable Gland 3X195 Mm/185 , Bus Bar Insulator Size ½”X8” Suman/Lby/Wingwan , Allu Bus Bor Strip 10X5mm2 , Hrc Fuse N.S. Type 16 Amp. , Glass Sleeve Size 1Mm , Glass Sleeve But Size 2Mm , Glass Sleeve Butsize 3Mm2 , Glass Sleeve Butsize 4Mm2 , Glass Sleeve Butsize 5Mm2 , Glass Sleeve Butsize 6Mm2 , Glass Sleeve Butsize 7Mm2 , Glass Sleeve Butsize 8Mm2 , Glass Sleeve Butsize 9Mm2 , Glass Sleeve Butsize 10Mm2 , H.T.Tape Size ¾” , H.T.Tape But Size 1 , Battery Terminal 12 Vote , Phase Testertaparia Make , Wooden Board 8”X10” , Porceline Pipe ¾ “X12” , Angle Holder Anchor Makehavells , Ceiling Rose Anchor Make Havells , Saddle Size ¾ “ , Wooden Board With Sunmica Top 9”X12” , Power Condenser 2.5Mfd Havells/Gc , Do But 4 Mfd , -----D0------But 4Mfd , -----D0------- But 6 Mfd , ----- D0------ But 8 Mfd , ----- D0------ But 33 Mfd , -----D0------- But 100 Mfd , C.T.C. , Pendent Holder K-555 , Tube Holder Bajaj/Anchor/Havells , Condenser 15 Mfd,440V/Anchor/Havells , Cotton Tape 1” , Araldite 180 Grms Tube , Porcelisne S.T. Holder 250 , ----- Do------ Prut 70 Watt. , Hand Lamp Complete With Lamp , Heater &Element 150 Watt. Surya , Cotton Tape ¾ , S.T. Holder 100 Watt K-555 , Petroleum Jolly , Exhaust Fan,1440 Rpm 18 Ke / Havells , Condenser 12 Mfd/ Lo Mfd 250 Volt Usha Make , ----- Do--- But 20 Mfd , ----- Do--- But 30 Mfd , Soldering Wire 18 Swg, , White Patrol , Film Paper 10 Mile , Screw Driver Set Taparia/Jhalani , Screw Driver No.839 Taparia/Jhalani , Screw Driver No.832 Taparia/Jhalani , Screw Driver No.829 Taparia/Jhalani , G.I. Strip 1/8”X2” Ici Markedtaparia/Jhalani , Screw Driver No.829 Taparia/Jhalani Make , Screw Driver No.929 , Nose Plair Size 8” , Soldering Iron 250 Watt. Havells/Gompton , Insulating Plair Size 8”Taparia Make , Soldering Iron 35 Watt. Wala/Mcare , Cable 4 Loud50 Mm2 , ------ D0---- But 120 Mm2 , ----- D0------But 185 Mm 2 , Black Tape ¾ , Flash Type Switeh & Socket Combimed 15 Amp.Anchor Make , S.C.Holder 60/100 Watt Jyoti Make , Button Holder Anchor Make Havells , Flash Type Switch 5 Amp Anchor Mak , Flash Type Switch 5 Amp Anchor Make , Metallie Carbon Bush With Tail,Grade E-15 Size 3/8”X7/8”X1.5” , Do But 16X31x40,Mm , ----D0—But 12X171x30 Mm , ----D0—But 15X20x65 Mm , Air Dry Insulatingvarnish Dr Back Make , Bactrol Gray Vanish Dr Back Make , Thinner For Varnish , Tumbler Switch Porclinebase 15Amp.Kay Make , ---D0----- But 5 Amp. , Plug Top 5 Amp. Anchor Make Havells Rk , ---D0----- But 15 Amp. , Metallic Carbon Bush Without Tail Grade-15 Sige ¾”X1”X3” , Carbon Bus Holder Brass Base For Cane Unloader Dewalt , Nicrome Wire 20 Swg , Nicrome Wire 23 Swg , Dioide Forward Polarity 321,150,Ratan Shah Make Jyoti , ---D0---But 321 Um100g , Flexible Pvc Capper Twin Twisted 23/26 2 Core Vidyut / Hemtron National Make Coil & 91.44 Mtr , ---- D0--- But 40/76 , Pvccopper Wire/Lore3/22 Nationalmake Havells , Pvccopper Wire/Lore3/20 Nationalmake Havells , Pvc Copper Wire Lore3/22 National/Vidyut/Havells , ---- D0--- But 3/20 , ---- D0--- But 7/20 , ---- D0--- But 7/22 , Pvc Copper Wire,1Core7/18 National/Vidyut/Hemtrox Make(Coil Of 91.44Mtrs) , ----Do----But 7/20 , Workshop Flexible Wire2 Core,40/76,National/Vidyut/Hemtrox Make(Coil Of 91.44 Mtrs) , -----Do----But 23/76 , Push Button Switch With Element 3-11] 1Not 1Nc , Limit Switch Type Lt/Lrgr.No.7-13 Ac-11415V 1.5 Amp D.C.-11,Vaishvion Make , Multi Meter Sanwa Make Small Size Micho/Rishi , Limit Switch Type C.S. 100V, 1Nc, 10A,500A ]Ac.Vaishnomake , Proximityswitch As Per Sample Stronger , Electronic Timer Et-100 Semens /L&T , Ag Timer 0-110 Sec. Terminal L 1+2Controlsupply 3+4 Instant Hours 5+6 Delay Ete ,Double Relay , ----- Do---- But 0-50 Sec. , Fuse Base & Carrir Cutout Backalite 50A , ----- D0--- But 63 Amp , ----- Do--- But 15/16 Amp , Glass Fuse 5 Amp , Indicating Lamp Pin/Serew Type 50 Voltjigo/Ae , Holder For Indicating Lamplamp 3 Watt. Jigo/Ae , Mataliecarbon Bush With Out Tail ¾”X1”X3” , ---- D0--- But 8X20x35mm , --- D0—But 16X32x40mm , Do---- But.19 X 40 X 50 Mm , --- D0--- But 22X32x45mm , Pvc Flexible Copper Wire 1-5 Mm2yudyt Make Havells , Pvc Copper Wire 6Lare 120/76 Double Visulated National/Anchor , Solenoid Coil 230 V A/C For S.D. Machinerotox/Rutork , Multi Core Copper Cable 12X115sq Mm National/Vidyut/Hewtron Make , Power Capacitor Universal/Lot/Siemeus Make , Slipring Carbon Holder Brass Frame Lcw -250Kw-67, Rpm-1630, V-Rotor V-2287 For Spray Pond , Fixed & Moving Kit Mei Make Starter Type N-2 Suitablefor 200 Hp Motor Rating 300/%A 415 V , Fix & Moving Kit For Sliring Motor Startertype Osr-10-8 Hp-120, V-415] Mb1 Make , Fusebase With Cap & Gagu Ring 63 Amp Tp. For D.Z. Type Fuse B.L. Make , D.Z . Type Fuse 63 Amp. , D.Ztype Ring 63 Amp , ------ D0---- But 25 Amp , Dztype Fuse Link 63 Amp L&T, Semens , Copper Wire Swg Havells/Anchor/Polycab , Copper Wireswg , Fuse Cop 25/35 Amp , Fuse Cop 63 Amp , Hrc Fuse Link D2 Type 25Amp , -------- D0---But 62 Amp , Kit Kat Porciline Unit 16 Amp , ---- D0---32 Amp , D.P. Main Switch 16 Amp 415. Standerd Makehavells/L&T , ------ D0—But 32 Amp , Fixed & Moving Contact Rs-15 Kilburn Make , ----- D0--- But 5D -15 , Carbon Bush 1.5”1/3/8”) , Dztype Fuse Base Tripple Pole 415V,63 Amp , ------ D0----- 35/25 Amp , Dz Type Guagering 35 Amp , D2 Type Fuse 25/35 Amp , Corbon Buse Holder For500 Hp Motor , Do For 210Hp Motor , Motor Terminal Connection Plate 40 Hp (Kec) Make , ------- Do--- But 60 Hp , ---- Do---- But 15/25 Hp , ---- Do---- But 15 Hp , Moving Iron Amp Meter Flash Type Dia Ct Operated 600/5 Amp Aemake , C.T. 600/5 Amp Af2 Make L&T , Amp Meter Pedastal Type 0-30 Amp To 60 Amp , Amp Meter 300/5 Amp Size 144X144ae Make , Volt Meter 0-600 Amp , Amp Meter 200/5 Amp 96:96 Ae Make Erh/Rc , Volt Meter O-150 Size 144X144 Ae Make , Amp Meter Square Mounted 75X75 Mm2400 /5 Amp Ct Operated Ae Make , Hylimerod ½ “/ ¾” , Mcb 6 Amp. Mps/ Ind.Copp 10 Amp , K.W. Meter Range 0-300 Ct-400/5 Amp 3 Pole 415 Volt Size 144X144 , Stay Wire , Stay Insulator ¾”X4” , Terminal Connector 2-5 Mm Elemex Make , A.C.S.R. Conductor , Digital Multimeter Frequency Meter Make- Ae/Abb/ L & T. , Carbonbushsize100x20x20 Mm , ------- D0 ------ But 20X20x20 Mm , Digital Multimeter Electronic , Model 9A, Dmm-18,Meea Meter Pvt Ltd. , Baokelite Fuse (Cut-Out)63 Amp .Standard Make , ------- Do---- But 16 Amp , Fuse For A.V.R. , Slipring 150 Kw/100 Hpmake Ke/L&T , Bengin , Meggarr 1100 Volt Motwani I Make , Hylumsheet ½” , Switchgear Items Itemmake Meeho , Super Enamalled Copper Wire Devidayal/Htp/Bic , Cables Lugs Dowell’S Make , Condenser80mfd Asian/Usha Make , Fiber Glass Sheet All Size , Cotton Tape Size ½”Steel Grip , D.C.C. Allu Wire All Size , Change Over Switch 63 Amp Standard Makel & T , -------D0--- But 100 Amp , Hrc Fuse Type Gsa 50 Amp , Spare Kit Sd-15 Kilburn Make , Serew Driver 12” Taparia Male , ------ Do---- But 10” , Film Paper 14 Miles Lrs/ Uokho , Soldering Iron 65 Wattom/Rc , Soldering Wire 21 Swg , Fixed & Moving Contract Kit R-5,50 Hp, 460 V , Magnetic Coil For Spare Kit Make Gikfun / Hoby Magnet , S.T. Holder 300/500 Watt Jyoti Make , Pvc Copper Unarmoured Flexible Cable 1.5Mm*15Crore,500V National Make 151Mark , Twin Twist Copper Wire 14/76 2Crore 151Mark Each Coil Of 91.44Mtrs , Pvc Allu Wire 2.5Mm 2Crore 151Mark (Coil Of 91.44Mtrs , Lamps &Tubescrompton/Bajaj Make/ Ancher , Fittings& Accessoriies Crompton /Bajaj Make/ Ancher , Hn Type Fuse Base 630 Amp E.E. Make Om/Rc , ------ D0---- But 400 Amp , T.P. Fuse Base D~ Type 500 V. 63 Amp, Bch Make , --------- D0------------ But 25 Amp , Fuse Cap For Above 63 Amp Bch. Make , ---------- Do--- But 25 Amp , Guage Ringfor Above 63Amp , Tpn Switch 32 Amp Havells Make/Crompton , ------- Do------ But 63 Amp , Power Contactor 20 Amp 415 V.Bch. Make , -------- D0------ But 25 Amp , --------- D0 ----- But 40Amp , No Volt Coil 20 Amp Bch. Make , ------- D0----- 40 Amp , O.L. Relay 8 To 13.5 Amp Bchmake , ------- D0 ---- But 13.5 To 20 Amp , Slipring Assembly Asi Make For 170 Hp Motor , Heater Element 2000 Watt Best Quality , Motor Cannectionlead , Fuse Wire 20/25 Amp , Compensatingcablek Type , Leatheriesed Paper , Porcilinkitkat 100 Amp , Diode W-400,D-170 Forwand For Weling Machine , P.T.Bulb 100 Watt Crompton/ Phillips , Urica Wire 10 Sws , Amp Motor 144X144,0-5 Amp Dc-75 Mv. , Amp Motor 21/2,0-5 Amp Dc. , Volt Meter 21/2X21/2 0-150 Vdc , Suppressor Superstar For 1500 Kw Alternator , Combination Plier-8 Make Taparia , Screw Driver-8 , Crc-226 Ml-300/ 400 , Multi Meter Meco , Slipring Id-73 Od-205Lenth-142 , Proximitly Switch 30 Vdc , P.T. Holderanchor , St Holder 100 Wattanchor , Pvc Tape 3/4Steelgrip , Condensor 2.5 Mfd Havells , Condensor 3.15 Mfd Havells , Condensor 4 Mfd Havells , Condensor 6 Mfd Havells , Proximitly Switchdia 18 Mm 200 Ma/ Stronger , Smps 240 Volt Input-24 Volt D.C.2.5 Amp. Omron , Push Bottan Station10 Way Make Ae , Condensor 10 Mfd Havells , Glass Tape Steelgrip , Volt Meter 4 500 Volt , Amp Meter 4 150/8 Amp0 Ctr , C.T. 60/5 Amp Ae/L&T , C.T. 30/5 Amp , C.T. 800/5 Amp , Amp Meter 4 60/5 Amp Ae/Rc Make , Diod 321 Farward Ruttonsha/ Axeit Make , Diod 321 Reverse Ruttonsha/ Axeit Make , Clamp Meter A/C D/C 1000 Amp. , Potentio Meter 10 K Make Rc , Amp.Meter Dc-6 0-10 Amp. , Glass Fuse-30 Mm 10 Mm With Fuse , Remote Push Botton Set Complet. Make Kamcon , Heavy Dutty Magger 500 Watt Yokins/ Risabh , Teflon Tape Champion , Soldring Iron 25 Watt , Amp Meter Ctr 600/5 Amp Dia-3.5 Ae/Rc , Carbon Brush Copper- 21.5 X 32 X 52 , Continiuty Tester With Celltaparia , Phase Tester Taparia , Mcb 10 Amp. Dpanchor/ Abb , Mcb 10 Amp. Sp Anchor/ Abb , Mcb 32 Amp. Tp Anchor/ Abb , Mcb 63 Amp. Tp Anchor/ Abb , Mcb 6 Amp. Sp Anchor/ Abb , Mcb 6 Amp. Dp Anchor/ Abb , Hydaulic Thruster For Cane Unloder , Pvc Copper Sumbersible Flate Cable-35 Mm X 3 Core , Copper Flexible Wire-23/76 Havells/ Rr Cable , W/S Flexible Copper Wire-23/76 X 2 Core Havells/ Rr Cable , Copper Wire 2.5 Mm X 1 Core Havells/ Rr Cable , Copper Wire 4 Mm X 1 Core Havells/ Rr Cable , Copper Lug- 16 Mm H.D Dowells , Copper Lug- 25 Mm H.D Dowells , Copper Lug- 35 Mm H.D Dowells , Copper Lug- 50 Mm H.D Dowells , Alu. Lugs- 25 Mm H.D Dowells , Alu. Lugs- 35 Mm H.D Dowells , Alu. Lugs- 50 Mm H.D Dowells , Alu. Lugs- 70 Mm H.D Dowells , Alu. Lugs- 95 Mm H.D Dowells , Alu. Lugs- 150 Mm H.D Dowells , Alu. Lugs- 240 Mm H.D Dowells , Sv Choke 250 Wattbajaj/ Philips , Sv Choke 400 Wattbajaj/ Philips , Pvc Copper Wire 1 Mm X 2 Core Rrcable/ Havells , Led Light- 14 Watt Bajaj/ Philips/ Cropton , Pt. Bulb 100 Watt Bajaj/ Philips/ Cropton , St Bulb-100 Wattphilips/ Cropton , Pvc Copper Wire 1.5 Mm X 2 Core Havells/ Rrcable , Pvc Copper Wire 2.5 Mm X 2 Core Havells/ Rrcable , Pvc Copper Wire 4 Mm X 3 Core Havells/ Rrcable , Pvc Copper Subnersibile Flate Cable-35 Mm X 3 Core , Copper Flexible Wire-23/76 , W/S Flexible Copper Wire-23/76 X 2 Core , Pvc Copper Wire 2.5 Mm X 2 Core , Ignitor For S.V. Lamp Bajaj / Surya , S.V. Lamp 250 Watt Bajaj , S.V. Lamp 400 Watt Bajaj
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 5
Uttar Pradesh View Result →
11.
Agriculture #9483515 Technical Bid
Compititive Ebidding For Supply Of General Electric Items For Season 2025-26 , Pvc Insulating Tape, Steel Grip, Size 3/4X10m(Red, Yellow, Blue, Black) , Empire Tape Size 3/4X20m , Empire Tape Size 1X20m , Glass Varnished Tape Size 3/4X20m , Glass Varnished Tape Size 1X20m , Black Tape Size 3/4X10m Johnshon Make , Black Tape Size 1X10m Johnshon Make , Cotton Tape Size 1X20m Roll , Ctc 300Ml Bottle Bharat Bijli Make , Crc 2-26 400Ml, Bharat Bijli Make , Insulation Varnish Elmo-Luft Ia1 Kg, Dr Beck & Co. Make , Thinner 218 For Above Varnish, 1 Litre Dr Back Make , Beck-Tol Red & Grey 1 Kg, Dr Beck & Co. Make , Phase Tester, Taparia Make , Combination Plier 8 Taparia/Tata Agrico/Wulf Make , Nose Plier 8 Taparia/Tata Agrico/Wulf Make , Continuity Tester With Cell , Insulation Tester (Megger)Infinity To Zero Ohms 500V , Digital Multi-Meter 603, For Resistance, Volts, Ma Testing Fluke/Htc/Meco Make , Tong Tester1000ampere, Volts, Resistance Testing Fluke/Htc/Meco Make , Padent Holder 100 Watts, 2 Pin, 240 Volts , Button Holder 100 Watts, 2 Pin, 240 Volts , Angle Holder 100 Watts, 2 Pin, 240 Volts , S.C. Holder100 Watts, 240 Volts , Flush Type Switch 5Amp, 240 Volts, Anchor/Havells Make , Flush Type Switch 15Amp, 240 Volts, Anchor/Havells Make , Flush Type Switch Combined Switch-Socket5amp, 240 Volts, Anchor/Havells Make , Flush Type Switch Combined Switch-Socket 15Amp, 240 Volts, Anchor/Havells Make , Flush Type Socket 5Amp, 5Pin, 240 Volts, Anchor/Havells Make , Flush Type Socket15amp, 5Pin, 240 Volts, Anchor/Havells Make , Plug Top5amp, 3Pin, 240 Volts, Anchor/Havells Make , Plug Top15amp, 3Pin, 240 Volts, Anchor/Havells Make , Ceiling Rose240volts, 5 Amp , Novex Paperf-Class,5 Miles , Novex Paperf-Class, 7.5 Miles , Novex Paperf-Class,10 Miles , Bakalite Kit-Kat16amp, 240 Volts, Ee Make , Bakalite Kit-Kat 32Amp, 240 Volts, Ee Make , Bakalite Kit-Kat 63Amp, 240 Volts, Ee Make , Fuse Carrier Bakalite 63Amp, 240 Volts , Alumunium Lugsdowells Make 16Sqmm , Alumunium Lugsdowells Make 25Sqmm , Alumunium Lugsdowells Make 35Sqmm , Alumunium Lugsdowells Make 50Sqmm , Alumunium Lugsdowells Make 70Sqmm , Alumunium Lugsdowells Make 95Sqmm , Alumunium Lugsdowells Make 120Sqmm , Alumunium Lugsdowells Make 150Sqmm , Alumunium Lugsdowells Make 185Sqmm , Alumunium Lugsdowells Make 225Sqmm , Alumunium Lugsdowells Make 240Sqmm , Alumunium Lugsdowells Make 300Sqmm , Alumunium Lugsdowells Make 400Sqmm , Copper Lugsdowells Make 16Sqmm , Copper Lugsdowells Make 25Sqmm , Copper Lugsdowells Make 35Sqmm , Copper Lugsdowells Make 50Sqmm , Copper Lugsdowells Make 70Sqmm , Copper Lugsdowells Make 95Sqmm , Copper Lugsdowells Make 120Sqmm , Copper Lugsdowells Make 150Sqmm , Copper Lugsdowells Make 185Sqmm , Dowells Paste Tube/Corrosoin Tube , Screw Driversize 1/4X6, Taparia Make , Screw Driversize5/16X8, Taparia Make , Screw Driversize 3/8X10, Taparia Make , Screw Driversize 1/2X12, Taparia Make , D-Spaner Complete Set- 6Mm To 32Mm, Taparia Make , Ring-Spaner Complete Set- 6Mm To 32Mm, Taparia Make , Box Spaner Complete Set- 6Mm To 32Mm, Taparia Make , Electric Tool Kit Sd-192-Hs-8 41 Pieces- Screw Driver, Sockets & Bit Set Force/Tiwan Make , Electric Tool Kit42 Pieces 1/4 Socket Combination Set, Force/Tiwan Make , Pvc Insulating Sheathed Copper Conductor Wire/Cable -Vidhut/ National/Havells Make 1 Core X 1.00Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 1 Core X 1.50Sqmm, Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 1 Core X 2.50Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 1Core X 4.00Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 1Core X 6.00Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 2 Core X 1.00Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 2 Core X 1.5Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 2 Core X 2.5 Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 2 Core X 4.00Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 2 Core X 6.00Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 3 Core X 1.50Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 3 Core X 2.50Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 3 Core X 4.00Sqmm Roll @91.44M , Pvc Insulating Sheathed Copper Conductor Wire/Cable-Vidhut/ National/Havells Make 3 Core X 6.00 Sqmm Roll @91.44M , Pvc Insulating Sheathed Alumunium Conductor Wire/Cable-Vidhut/ National/Havells Make 2 Core X 2.50 Sqmm Roll @91.44M , Pvc Insulating Sheathed Alumunium Conductor Wire/Cable-Vidhut/ National/Havells Make 2 Core X 4.00 Sqmm Roll @91.44M , Pvc Insulating Sheathed Alumunium Conductor Wire/Cable-Vidhut/ National/Havells Make 2 Core X 6.00Sqmm Roll @91.44M , Hylam Bakalite Sheet Isi Standard 1/4 X 2 X 3 , Hylam Bakalite Sheet Isi Standard 1/2 X 2 X 3 , Hylam Bakalite Sheet Isi Standard 3/4 X 2 X 3 , Bakalite Rod 1X1m , White Fibre Glass Rod 3/4 , White Fibre Glass Rod 1 , White Fibre Glass Rod 2 , Teflon Rod 20Mmx300 , Teflon Rod 30Mmx300 , Teflon Rod 35Mmx300 , Teflon Rod 50Mmx300 , Teflon Rod 20Mmx300 , Fibre Glass Tube 10Mm X 1M , Fibre Glass Tube12mm X 1M , Fibre Glass Tube 16Mm X 1M , Inductive Proximity Switch Sensing Distance 14Mm, 24 Vdc Pnp, Jai Shree Make , Mtc Coil/ Selonoid Coil- 220Volts, Rotex Make , Mcb 1-Pole 6 Amp Havells/Standard/Schneider , Mcb 1-Pole 16 Amp Havells/Standard/Schneider , Mcb 2-Pole10 Amp Havells/Standard/Schneider , Mcb 2-Pole16 Amp Havells/Standard/Schneider , Mcb 2-Pole32 Amp Havells/Standard/Schneider , Mcb 2-Pole63 Amp Havells/Standard/Schneider , Mcb 3-Pole32 Amp Havells/Standard/Schneider , Mcb 3-Pole63 Amp Havells/Standard/Schneider , Mcb 4-Pole 25 Amp, 440V,Havells/Standard/Schneider , Mcb 4-Pole 40 Amp, 440V,Havells/Standard/Schneider , Push Button Station 1No + 1Nc, Vashno Make , Push Button With Element,Teknic Make , Mushroom Type Push Button With Element(Red/Green) , Foot Switch, 1No + 1Ncbch Make , Micro Switch,Bch Make , Limit Switch 1No + 1Nc Eussion Make , Limit Switch Element 1No + 1Nc Eussion Make , Dcr Thruster 604Se 1616 , Carbon Brushes Grade M15e- Double Leadsize 50X40x20mm , Carbon Brushes Grade M15e- Double Leadsize 40X32x20mm , Carbon Brushes Grade M15e- Double Leadsize 40X40x20mm , Carbon Brushes Grade M15e- Double Leadsize 45X15x15mm , Carbon Brushes Grade Eg-224-Double Lead Size 45X32x22mm , Carbon Brushes Grade Eg-224-Double Leadsize 40X32x12.5Mm , Carbon Brushes Grade Eg-224-Double Lead Size 40X32x20mm , Carbon Brushes Grade Eg-224-Double Lead Size 30X16x40mm , Carbon Brushes Grade Eg-224-Double Leadsize 50X32x16mm , Carbon Brushes Grade Eg-224-Double Leadsize 50X32x25mm , Carbon Brushes For Hand Grinder 4/Ag4 Dewalt/Bosch Make , Carbon Brushes For Hand Grinder 7/Ag7 Dewalt/Bosch Make , Armature For Hand Grinder 4/Ag4 Dewalt/Bosch Make , Armature For Hand Grinder 7/Ag7 Dewalt/Bosch Make , Brass Holder For Carbon Brush250 Hp Motor, Frame No. Tr-6 , Brass Holder For Carbon Brush170hp Motor/1.5 Mw Alternator Jyoti Make Alternator , Brass Holder For Carbon Brush100hp Motor For Kec Make Motor , Brass Holder For Carbon Brush400 Hp Motor, Frame No. Tr-7 Kec Make Motor , Slip Ring170hp, 3-Poles , Slip Ring265kw, 3-Poles , Slip Ring, 2 Polesfor 1.5Mw Kec Make Alternator , Pvc Motor Air Cooling Fanframe No.- 90L/100L, 3Hp , Pvc Motor Air Cooling Fan Frame No.- 112M, 5Hp , Pvc Motor Air Cooling Fanframe No.- 132M, 10Hp , Pvc Motor Air Cooling Fanframe No.- 160M, 15Hp , Pvc Motor Air Cooling Fanframe No.- 180M, 20Hp , Pvc Motor Air Cooling Fan Frame No.- 200M, 25Hp , Pvc Motor Air Cooling Fanframe No.- 225L, 40Hp , Exhaust Fan 12, 1Ph, 960Rpm , Exhaust Fan 16, 1Ph, 960Rpm , Exhaust Fan 18, 1Ph, 960Rpm , Techo-Generator Dtg-4000 70Ma/200Vdc At 4000Rpm , Techo-Generator Tdp-02-Lt100v Dc At 1000Rpm Hubner Make , Techo-Generator Tdp-02-Lt60v Dc At 1000Rpm Hubner Make , Synchronous Timer Em-10000 To 60S, 2No+2Nc, 240/415V Ac, Gic Make , Synchronous Timer Em-20000 To 120S, 2No+2Nc, 240/415V Ac, Gic Make , Synchronous Timer Em-20000 To 60S, 2No+2Nc, 240/415V Ac, Gic Make , Timer 2No+2Nc,0 To 60/120S Gic Make , Dyno Drive Controller Complete Upto 50Hp Motor , Motor Heating Rod1m Long, 1000/1500W , Motor Heating Rod 1/2M Long, 2000W , Pvc Unarmoured Flexible Cable Copper Conductor Flat/Round4corex1.5Mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat/Round3corex2.5Mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat/Round 3Corex4mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat/Round3corex6mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat/Round3corex10mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat/Round3corex35mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat/Round3corex50mm² , Pvc Unarmoured Flexible Cable Copper Conductor Round1corex50mm² , Pvc Unarmoured Flexible Cable Copper Conductor Round1corex70mm² , Pvc Unarmoured Flexible Cable Copper Conductor Round1corex90mm² , Pvc Unarmoured Flexible Cable Copper Conductor Round1corex120mm² , Pvc Unarmoured Flexible Cable Copper Conductor Round1corex150mm² , Condenser 2.5 Mfd 240V , Condenser 3.15 Mfd 240V , Condenser4 Mfd 240V , Condenser6 Mfd 240V , Condenser10 Mfd 240V , Condenser33 Mfd 240V , Condenser50 Mfd 240V , Condenser60 Mfd 240V , Condenser72 Mfd 240V , Condenser150/200 Mfd 240V , Power Capacitor 25Kvar/440Volt Oil Filled, Jaivik Make , Glass Sleeves4mm/6Mm , Glass Sleeves8mm/10Mm , Glass Sleeves 12Mm/16Mm/20Mm , Soldering Wire18/20 Swg, 250Gram Weight , Soldering Fluxeyer-7 100Ml , Soldering Iron 10W/240V , Soldering Iron35w/240V , Air Blower 1-Phase, 240V, 50Hz , Hot Air Blow Double Speedblower With Heater, 1-Phase, 240V, 50Hz , Copper Bus Bar (Electrolyte)Size 10Mmx50mm , Copper Bus Bar (Electrolyte)Size 12Mmx75mm , Copper Bus Bar (Electrolyte)Size 12Mmx100mm , Shakle Insulatorsize 100X110mm , Shakle Insulator Size 95X100mm , Bus Bar Insulator Length-100Mm, Breadth-50Mm, Height-60Mm, Hole-1/2 , Current Transformer (Ct) 15Va100/5A,200/5A , Current Transformer (Ct) 15Va300/5A, 400/5A , Current Transformer (Ct) 15Va600/5A, 800/5A , Ampere Meter 96X96mm0 To100a , Ampere Meter 96X96mm 200A, 300A, & 400A , Ampere Meter 96X96mm 600A, & 800A , Ampere Meter 96X96mm 1000A, 1200A , Ampere Meter 96X96mm 1600A , Voltmeter 96X96mm,0 To 600V , Frequency Meter1-Phase/240V, 50Hz , Frequency Meter 2-Phase/415V 50Hz , Diode10 Ur 40/ 10 Ur 25 Pnp , Diode 10 Ur 40/ 10 Ur 25 Npn , Potentiometer 500 Ohms 3W / 500 Ohms 1W , Potentiometer 2K 1W, 5K 1W, 10K 1W , Terminal Connector6 Way, 16Amp, 240V , Terminal Connector12 Way 16Amp, 240V , Toggle Switchon-Off, 10Amp 240V , Toggle Switch/ Change Over Switchon-Off-On, 10Amp 240V , Motor Winding Connection Braided Leadcopper Conductor,Glass Braided 4Mm² , Motor Winding Connection Braided Lead Copper Conductor,Glass Braided 6Mm² , Motor Winding Connection Braided Leadcopper Conductor,Glass Braided 10Mm² , Motor Winding Connection Braided Leadcopper Conductor,Glass Braided 16Mm² , Motor Winding Connection Braided Leadcopper Conductor,Glass Braided 50Mm² , Motor Winding Connection Braided Leadcopper Conductor,Glass Braided 70Mm² , Motor Winding Connection Braided Leadcopper Conductor,Glass Braided 95Mm² , Pvc Workshop Flexible Copper Conductor Wire/Cable Size 2Corex23/76, [email protected] , Pvc Workshop Flexible Copper Conductor Wire/Cable Sizes 2Corex40/76, [email protected] , Pvc Twin Twisted Flexible Copper Conductor Wire/Cable2corex23/76, [email protected] , Pvc Twin Twisted Flexible Copper Conductor Wire/Cable2corex40/76, [email protected] , Semi-Conductor Fuse 630Amp, 690V Bushman Make , Semi-Conductor Fuse 700Amp, 690V Bushman Make , Instrument Cable 2 Core, 1Sqmm , Electronic Buzzer 220V Ac , Electric Bell 220V Ac , Bell Switch 5Amp, 230V , Temp. Compensative Cable K-Type (One Roll) , Thermo Couple K-Type 12 X 6Mm , Temp. Digital Indicator 96Mm X 96Mm K- Type , Level Indicator With 02 Relay With Low & High Setting , Flow Indicator Cum Totalizer , Announciator/Announcer , Counter Meter Pnp 220Volts , Digital Am-Meter C/T Operated 4 X 4 , Digital Voltmeter 0 To 600V, 4 X 4 , Digital Frequency Meter, 4 X 4, 50Hz, 240/440V , Cradle Terminal/Contact For 800/1600Amp L&T Acb , Cradle Terminal/Contact For 3200/4000Amp L&T Acb , Jaw Contact For 800/1600Amp L&T Acb , Jaw Contact For 3200/4000Amp L&T Acb , Changeover Switch 32Amp, 240 Volts , Changeover Switch 63Amp, 440 Volts , Changeover Switch 125Amp, 440 Volts , Changeover Switch 150Amp, 440 Volts , Moving Copper Contact For 250Amp 500V Switch Siemens/L&T , Moving Copper Contact For 400Amp 500V Switch Siemens/L&T , Moving Copper Contact For 630Amp 500V Switch Siemens/L&T , Fix Copper Contact For 250Amp 500V Switch Siemens/L&T , Fix Copper Contact For 400Amp 500V Switch Siemens/L&T , Fix Copper Contact For 630Amp 500V Switch Siemens/L&T , Alumunium Bus Bar Size 6Mm X 50Mm , Alumunium Bus Bar Size 8Mm X 50Mm , Alumunium Bus Bar Size 10Mm X 50Mm , Alumunium Bus Bar Size 12Mm X 50Mm , Leathorised Paper 5 Miles E-Classkremple Make , Leathorised Paper 7 Milese-Class Kremple Make , Leathorised Paper 10 Milese-Class Kremple Make , Hand Hammer Drill Machine With Drill-Bit , Hand Drill Machine Dewalt/Boch Make , Angle Grinder 4 Dewalt/Boch Make , Angle Grinder 7 Dewalt/Boch Make , Remote Control Station 8Way -01Stop For Mill Crane , Pvc Unarmoured Flexible Copper Conductor 1.5Mmx 16Core , Electric Shock Proof Hand Gloves 11Kv , Electric Shock Proof Shoes , Electric Safety Belt , Smps 05/10A, 220V Ac, 24Voltdc , Element For Foot Switch , Element No-Nc For Foot Switch, Bch Make , Element 1No Green, Teknic Make , Element 1Nc Red, Teknic Make , Push Button Red/Green, Teknic Make , Insulated Rubber Sheet Size-12Mm Thick X 1000Mm Breadth X 2000Mm Length , Laser/ Contactless Techcometer For Rpm Counting , Hand Hold Vibration Meter , Automatic Inverter 12V Dc Input, 220V Output, 1000Va, Amron, Luminous, Sukam Make , Automatic Inverter 24V Dc Input, 220V Output, 1000Va, Amron, Luminous, Sukam Make , Dry Battery 12V, 100Ah, Excide, Amron Make , Dry Battery 12V, 80Ah, Excide, Amron Make , Lead Acid Battery 12V, 150Ah, Excide, Amron Make , Brass Battery Terminal, Heavy Duty , Automatic Stablizer 5Kva, 130V -250V, V-Line, Bluebird Make , Automatic Stablizer 4Kva, 130V -250V, V-Line, Bluebird Make , Automatic Stablizer 10Kva, 130V -250V, V-Line, Bluebird Make , Ceiling Fan 1200Mm, Havells/ Cromption/Bajaj Make , Electronic Ceiling Fan Regulator, 100W, 230V Havells/ Cromption/Bajaj Make , Benzene Liquid , Portable Heavy Duty Aluminium Telescopic Extension Ladder (16.5 Feet) , Portable Heavy Duty Aluminium Telescopic Extension Ladder (19.50 Feet) , Electrical Lighting Goods , Glass Bulb Pin Type Low Voltage, 24Volts, 60/100W , Glass Bulb Pin Type 240V, 60W , Glass Bulb Pin Type 240V, 100W , Glass Bulb Screw Type240v 60W , Glass Bulb Screw Type240v 100W , Led Bulb09w, 240V , Led Bulb12w, 240V , Led Tubes Light2 Feet 08Wx240v , Led Tubes Light4 Feet 20Wx240v , Led Street Light 18/20W, 240Volts , Led Street Light 30/36W, 240Volts , Led Street Light 40/50W, 240Volts , Led Street/Flood Light 100/120W, 240Volts , Led Flood Light 150W, 240Volts , Led Flood Light 200W, 240Volts , Led Street Light 40W, 240Volts, Yellow Light , Led Street/Flood Light 100W, 240Volts, Yellow Light , Led Flood Light 150W, 240Volts, Yellow Light , Led Flood Light 200W, 240Volts, Yellow Light , Led Hammer Bulb Light 25/26/30W, 240Volts , Electonic Driver For Led Light 20/25W, 230V , Electonic Driver For Led Light 40/45W, 230V , Electonic Driver For Led Light 50W, 230V , Led Pcb For Street/Flood Light 20W , Led Pcb For Street/Flood Light 30W , Led Pcb For Street/Flood Light 45/50W
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 3
Uttar Pradesh View Result →
12.
Agriculture #9482613 Technical Bid
Tender For Supply Of Electric Goods Items - Tumbler Switch 5 Amp. Kay-555 Make 3 Tumbler Switch 15 Amp.Kay-555 Make 4 Peano Type Switch 5 Amp Anchor Make 5 Peano Type Switch 15 Amp Anchor Make 6 Porcline 5 Amp 3 pin plug base Kay-555 Make 7 Porcline 15 Amp 3 pin plug base Kay-555 Make 8 PVC Tape 3/4 X10 Meter Steel Grip Make 9 Cotton Tape 3/4- Kamal Brand 50mtr. 10 Cotton Tape 1 --Kamal Brand 50mtr. 11 Empire Tape 3/4 Kamal Brand 50m. Roll 12 Empire Tape 1 Kamal Brand 50m. Roll 13 Fibre Glass cloth 10mile/meter Kamal Make 14 Plastic leathraid sheet 5 mile 15 Plastic leathraid sheet 7.5 mile 16 Plastic leathraid sheet 10 mile 17 Plastic filim paper 5 mill 18 Plastic filim paper 7.5 mill 19 Fibre Glass sleeve 1mm 20 Fibre Glass sleeve 2mm 21 Fibre Glass sleeve 3mm 22 Fibre Glass sleeve 4mm 23 Fibre Glass sleeve 5mm 24 Fibre Glass sleeve 6mm 25 Fibre Glass sleeve 8mm 26 Fibre Glass sleeve 10mm 27 Fibre Glass sleeve 12mm 28 Condensor 2.5mfd. 29 Condensor 3.15mfd 30 Condensor 4mfd 31 Condensor 6mfd 32 C.T.C. B.D.H.(400Ml Bottle) 33 C.R.C. 2.26 / 5.66 Bharat Bijlee (300 M.L.) 34 Soldering paste 100 Gram 35 T.P. Switch Standred Make 16 Amp. 36 T.P. Switch Standred Make 32 Amp. 37 T.P. Switch Standred Make 63 Amp. 38 D.P. Switch 32 Amp. Standred Make 39 Tube Holder 40 Halogen Holder 41 Soldering iron 35W. 42 Pure Tin 43 Soldring wire 44 Halam Sheets 1/4X1 Meter 45 Halam Sheets 1/2X1 Meter 46 Halam Rod 3/4X1 Meter 47 Halam Rod 1X1 Meter 48 Halam Rod 11/2X1 Meter 49 PD type Amp meter 0-15,0-30Amp AE make 4 50 Flash type Amp meter 0-15,0-30 Amp AE make 100mmX100mm 51 PD type Amp meter 0-75 Amp CTR 75/5 AE Make 52 Flash type Amp meter 96x96,0-75,CTR 75/5 53 Flash type Amp meter 96x96,0-150Amp 54 Flash type Amp meter 96x96,0-300 amp CTR300/5 55 Flash type Amp meter 0-400Amp 96x96 56 Flash type Amp meter 0-600Amp CTR 600/5 57 Volt meter flash type 0-600,96x96 58 Volt meter flash type 0-600,144x144mm 59 Flash type Ammeter 0-100 Amps CTR 100/596X96mm 60 Flash type Ammeter 0-800 Amps CTR 800/5 61 Flash type Ammeter 0-200 Amps CTR 200/5 62 Flash type Ammeter 0-1000 Amps CTR 1000/5 63 C.T. 50/5 Ratio 64 C.T. 75/5 Ratio 65 C.T. 100/5 Ratio 66 C.T. 150/5 Ratio 67 C.T. 200/5 Ratio 68 C.T. 300/5 Ratio 69 C.T. 400/5 Ratio 70 C.T. 600/5 Ratio 71 C.T. 800/5 Ratio 72 Allu. Lugs all size dowells make 73 Copper lugs size dowells make 74 Thyrestor protection semi conductor fuse 450Amp Star/Germany make 75 Pure carbon brush 32x12.5x40mm grade EG 224 76 Carbon holder for GQ4 WolfMake 77 Carbn holder for GQ 6 Wolf Make 78 Armature for wolf make GQ 4 Grinder 79 Armature for wolf make GQ 6 Grinder 80 Amp meter6sq. 0-300 Amp AE Make 81 Bare Copper conductor 49WG S.W.G./65.W.G. 82 Carbon Holder for 125 H.P. N.G.E.F. Make Motor 83 Carbon Holder for 550/350/750 H.P. A.E.I. Make Motor 84 Carbon Holder for 150 H.P. K.E. Make Motor 85 Carbon Holder for 75 H.P. K.E. Make Motor 86 Carbon Holder for 10 H.P. G.E.C. Make Motor 87 Carbon Holder for 5 H.P. G.E.C. Make Motor 88 Carbon Holder for 50 H.P. K.E. Make Motor 89 Pure Carbon Size 20X30X40 Grade EQ 114 90 Pure Carbon Strip Size 20X20X100mm 91 Pure Carbon Strip Size 25X25X100mm 92 Power Factor meter 6 93 Thinner 205 Dr. Back make 94 Adjustable Plastic Cooling Fan 15H.P. 95 Do but 25 H.P. 96 M.C.B Single Pole 20Amp. 97 Endshiled 16 Amp. 98 do but 32Amp. 99 Do but 63Amp. 100 Action Bar 16Amp. 101 Do but 32Amp. 102 Do but 63Amp. 103 Timer EM-2000 104 Limit Switch LL-1 BCH Make 105 Diodes 321UM 100 Revers 106 Diodes 321UM 100 Forwerd 107 ABC 16Amp 240V. 108 Synchomes Timer EM-1000 02 No+02NC 220V. 0-30Sec. 109 Do but 0-60 Sec. 110 Kit Kat Fuse With Carrier 32Amp. 111 Bkt Kit Kat 63Amp. 112 D.C. Amp. Meter 4X4 0-10Amp. 113 Brasso in 100Ml 114 Carbon Bush Garde M-15E 50X40X20mm 115 No. Volt Coil for OCB 415V. 116 Fixed FingerContact for 600Amp OCB 117 Moving Arching for 600Amp. OCB 118 M.C.B 10Amp. 119 do but 16Amp. 120 Brass Rod 3/4X4 121 Abonite Rod 1.5X3 122 Potentio Meter 600 Amp 123 C.T.2000/5Amp. 124 Carbon Brush 16X32X35mm 125 C.T.1200/5Amp 4 Round 126 Penumatic Timer 0-180 Sec.230 Volt BCH Make 127 Element for Above 2No+02NC BCH Make 128 H.R.C. Fuse TIA 32 Amp 129 Do but Size TIS 63Amp 130 Program Switch 16Amp SRP-126C 131 Fuse Base With Carriar 125 Amp 132 Shield ed cable 1mm SqX2 Core 133 G.I. Wire 10 SWG 134 M.C.B. Hevails Make 3 Pol 63 Amp 135 M.C.B. Hevails Make 3 Pol 32 Amp 136 M.C.B. Hevails Make 3 Pol 25 Amp 137 M.C.B. Hevails Make 2 Pol 20 Amp 138 Condensir/ Capacitor 22 MFD 440 VAC 139 Condensir/ Capacitor 33 MFD 440 VAC 140 Condensir/ Capacitor 16 MFD 440 VAC 141 Condensir/ Capacitor 12 MFD 440 VAC 142 Condensir/ Capacitor 10 MFD 440 VAC 143 TPN Switch 63 Amp FFOL & T Make 144 M.C.C BANDREW YULE MAKE 3 Pol 415 VAC NFC – S103 3 Pol 415 VAC 100 Amp 145 Mashroom Type Push Button Red & Green L & T Make 146 Push button Element L & T Mke 10 Amp 250 VAC 1 NO+1NC 147 Fuse Kit Kat Backalite HF Type 32 Amp L & T 148 Real Insulator Proshalen 5 “ Lenth 149 Semi Conductor Fuse 600 V 630 Amp MMT- B1 150 Power Thyristor MCC 330 A In FNU Make 151 Power Thyrisot MCC 450 Amp INFNU Make 152 PVCMotor Colling Fan Heavy Duty 3 HP. 153 Do but Size 5 H.P. 154 Do but Size 7.5 H.P. 155 Do but Size 10 H.P. 156 Do but Size 20 H.P. 157 Do but Size 25 H.P. 158 Do but Size 30 H.P. 159 Glass Sleeve 15mm 160 Do but Size 20mm 161 Do but Size 25 mm 162 Push Button Station ON/Off Type Complete L & T 163 M.C.B. 3 Pole 25 Amp Haveels Make 164 Do but Size 32 AMP 165 Do but Size 63 Amp 166 L.E.D. Indi Cating Lamp Red 167 Do but Size Yellow 168 Do but Size Green 169 Amp Meter AE Make 96X96,0 to 25 Amp 170 Do but Size 0 to 30 Amp CTR 30/5 171 Do but Size 0 to 60AmpCTR 60/5 172 Do but Size 0 to 100 AmpCTR 100/5 173 Do but Size 0 to 200 Amp CTR 200/5 174 Do but Size 0 to 250 Amp, CTR 250/5 175 Do but Size 0 to 600 Amp, CTR 600/5 176 P.T. Holder 100 Watt 177 Heavy Duty Current Conductor 6 SWG 178 I.C.D.P. Mai Swich 63 Amp Standard Make 179 DC Motor Rokar Arm As per Sample 180 Carbon Bush Holder 12.5X32 As per Sampe 181 Bkt. Moving Finger PC- 4/6 182 Bkt. Moving Finger PC-2/3 183 Carbon Brush 12.5X32X40mm 184 Leatherised Paper E- Class 5mile 185 Potentio Meter 500 Ohm RW-3 186 Potentio Meter 5K RW-1 187 Glass Fuse 20mm 1 Amp 188 Starting Diode S-8 AN 20/25 Rverse 189 SartingDiode S-8 AN 20/25 Forward 190 Push ButtomPendent 9 Way as per Diagram 191 Glass Tape 1” 192 Nicrome Wire 193 Proximity Switch NC 30 VDC 50mm Dia 194 Proximty Switch PNP No 30 Volt DC 195 TPN Switch FAC 100 196 Carbon Brush H.D. 25X50X65 197 Carbon Brush 10X20X30 198 Copper Strip 25X25X100 199 Carbon Bush Copper 20X20X100 200 Do but Size 25X25X100 201 Porciline Kit Kat 63 Amp 202 ICTP Main Switch 32 AMP 203 P.V.C. CollingFan 05 H.P. Motor 204 Do but Size 7.5 H.P. 205 Alluminum Cooling Fan 25 H.P. Motor NGEF Make 206 Alluminum Cooling Fan 20 H.P. Motor NGEF Make 207 Exhaust Fan Blade 18 208 RPM Meter 72X72M ( 0-1500 RPM) ( 4-20MA) 209 Proximatory Switch PNP-10-30 Volt DC 210 Length of Slip Ring 62 mm 211 Singal Isolator Converter Input 4-20 MA Output 4-20 MA 212 HPSV Choke 400 Watt 213 HPSV Lamp 400 Watt 214 Ignitor for SV Lamp 215 ST Holder 400 Watt 216 Condenser 33 MFD 217 Adjustable Plastic Cooling fan for 15 HP Motor 218 Proximity Sensor, PNP NC 25mm Outer Diameter 50mm as per Diagram 219 Crimpling Die R-1 To R-14 for Dowells Make Hydraulic Machine 220 Dr. Beck Lufta 1A 221 Dr. Beck Bectrol Red 222 Dr. Beck Bectrol Grey 223 Insulating Mixture 224 Brasso 100Ml 225 Heating Element 1500 Watt 226 Push Button Actuator Suitable for ZBE-102N Element 227 Flash Type Amp Meter Size 96X96,0-50 Amp, CTR-5015, Make-AE 228 Pure Carbon Brush for Leveller and Fibrize Size-22X32X40mm Grade-M-13 229 New Hydraulic Thruster 25 Kg With Brakes Assembly-250mm 230 LED Indicating Lamp Yellow,220V AC 231 Flash Type Amp. Meter 0-1000 Amp, CTR-100015 Size-144X144, Make-AE 232 3 Pole Change Over Switch 32 Amp., 415 Volt AC Make-L&T,SKYU 233 600Amp / 415 volts Four pole Changeover knife type Heavy Duty Copper Special 234 300 Amp./415 Volt Four Pole Changeover Knife Type Heavy Duty Copper Special 235 7.5 H.P Motor Slip Ring (Bharat Bijli )55mm-ID & 61.5 Depth X900 236 LED Flood Light 50 W (White Light)Make Havells ( Warranty Two Year) 237 LED Flood Light 100 W (White Light)Make Havells( Warranty Two Year) 238 LED Bulb 9 WattMake Havells( Warranty One Year) 239 LED Tube light 20 WattMake Havells ( Warranty Two Year) 240 Hooter Siren Rotary Type 1-1.5 Km Range 241 Complete foot Switch with 2 Element, Make-BCH 242 MCB Havells 2 Pole 32 Amp. 243 MCB Havells 2 Pole 16 Amp. 244 MCB Havells 1 Pole 6 Amp. 245 LED Flood Light 50 W (Yellow Light)Make Havells ( Warranty Two Year) 246 LED Flood Light 100 W (Yellow Light)Make Havells ( Warranty Two Year) 247 LED Jumbo Bulb 50 W (Yellow Light) Make Havells ( Warranty Two Year) 248 Exhaust Fan Blade 12 249 Exhaust Fan Blade 24 250 Local Push Button Station with start stop switch,No+NC Element 230V 251 Pendent Bulb Holder 12 Amp.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
13.
Agriculture #9479304 Technical Bid
Ex-Godown Site Including Freight Rate, Supply Of General Electricals, Fittings And Accessories , Supply Of Electric/Lighting Goods. , Insulating Varnish Elmolufta-1, Dr. Back Make , Insulatingbectrol Red, Dr. Back Make , Insulating Thinner 205 Dr. Back Make , P.V.C. Tape Steel Grip 3/4, -Bhor , Cotton Tape 3/4 , Empire Tape 3/4 , Glass Tape 3/4 , H.T. Black Tape 3/4-J&J Make , No Vexpaper 7Mill & 10Mill -Crimple Make , Leathered Paper 7Mill & 10Mill, Crimple Make , C.T.C. , Crc2-26 , S.T. Holder 300/500 Watt -National Make , S.T. Holder 100 Watt, -National Make , Condensor 2.5 Mfd. Usha/Asian Make , Condensor 4 Mfd.-Usha/Asian , Condenser 33 Mfd. Usha/Asian Make , Power Capacitor -Usha/Asian Make , Bare Copper Wire 6Swg & 8 Swg , Bakalitekit Kat 63 Amp.-Ee Make , Backalitekitkat 100 Amp. -Ee Make , Potensio Meter 500V 3Rk-Pankaj Make , Phase Tester Pocket Type Set-Pankaj Make , Insulated Plier 8-Taparia Make , Insulated Screw Driver-Taparia Make , Insulated Screw Driver 12 -Taparia Make , Hrc Fuse 4Amp.-Ee Make , Hrc Fuse6amp.-Ee , Hrc Fuse 10Amp.-Ee Make , Hrc Fuse 16 Amp.-Ee Make , Hrc Fuse 63 Amp.-Ee Make , Pedestal Type Amper Meter 4 Dial 0-30-Ae Make , Pedestal Type Amper Meter 4 Dial 0-60A -Ae Make , Padistal Type Amper Meter 4 Dial 0-100Am E-Ae Make , Padistal Type Amper Meter 4 Dial 0-100 Ctr100/5 -Ae Make , Padistal Type Amper Meter 4 Dial 0-200 Ctr200/5-Ae Make , Padistal Type Amper Meter 4 Dial 0-300Ctr300/5-Ae Make , Padistal Type Amper Meter 4 Dial 0-400 Ctr400/5-Ae Make , Padistal Type Amper Meter 4 Dial 0-500 Ctr500/5-Ae Make , Padistal Type Amper Meter 4: Dial 0-600 Ctr600/5 -Ae Make , Squire Type Amper Meter 4 Dial 2505 Fuse Type-Ae Make , Squire Type Amper Meter 4 Dial 400/5 Flush Type-Ae Make , Squire Type Amper Meter 4 Dial 600/5 Flush Type-Ae Make , Squire Type Amper Meter 4Dial 800/5 Flush Type-Ae Make , Squire Type Amper Meter 4 Dial 1000/5 Flush Type -Ae Make , Squire Type Amper Meter 4 Dial 3000/5 Flush Type -Ae Make , C. T. 100/5 To 400/5 Flush Type , Plastic Cooling Fan Any Motor 5 Hp , Plastic Cooling Fan Any Motor 7.5Hp , Plastic Cooling Fan Any Motor10hp , Plastic Cooling Fan Any Motor 15 Hp , Plastic Cooling Fan Any Motor 20 Hp , Plastic Cooling Fan Any Motor 30 Hp , Plastic Cooling Fan Any Motor 40 Hp , Plastic Cooling Fan Any Motor60 Hp , Aluminium Cooling Fan Any Motor 15 Hp , Aluminium Cooling Fan Any Motor 40 Hp , Aluminium Cooling Fan Any Motor 60Hp , Pvc Copper Wire -National/Vidut , Pvc Flexible Copper Wire 7/16X1core -National/Vidut , Pvc Flexible Copper Wire 7/16X2core-National/Vidut , Pvc Flexible Copper Wire 19/16X1core-National/Vidut , Metalic Carbon Bush With Tail 22X32x40mm-Aling , Brass Holder For Above-Aling Make , Slipring For 250 H.P. Motor.Id-72Mm,Od-196Mm,L-140Mm , Slipring For 150 Kw Injection Motor Id-68Mm,Od-185,L-130Mm , Non Metallic Carbon Bush For Cane Unloader 20X20x100mm -Aling , Brass Holder For Above-Aling Make , Metallic Carbon Bush With Tail 10X25x40 For 80 Hp Motor , Carbon Holder For Above As Per Sample-Aling , Slip Ring For 80 Hp Motor Crompton Size Id-60Mmod-120Mm Length 75Mm , Metallic Carbon Bush 20X32x40mm For 150 Hp Motor-Aling Make , Brass Holder For Above-Aling Make , Slip Ring For 150 Hp Kec Motorid-68Mm,Od-180Mm,L-132 , Metalic Carbon Bush With Tail 16X32x40-Aling Make , Brass Holder For Above , Slip Ring For 75 Hp Kec Motor Id-45Mm Od-125Mm L-115Mm , Non Metallic Carbon Bush With Tail For 400 Hp D.C. Motor Size 20X32x36mm -Aling Make , Holder For Above , Fix Arching Contact 400 Amp. Ocb -Mei , V- Bar For 400 A Ocb-Mei , Moving Contact L Type 400 Amp.-Mei , Arching Contact 400 A-Mei , Fix Plate 630 Amp. , Glass Fuse 10 Amp. , Scr Dcr Thruster 1515 Sg , Rotary Switch 25 Amp. -Thakur , Diode 16 Mfr , Diode 40 Mr100 , Diode Ps 040 Cur F10 , Diode 5408 , Diode 321 Um100 , Diode 321 Umr100 , Mush Room Type Push Baton 10 Amp. -Vaishno Make , Contact Element For Aobve10 Amp.-Vaishno Make , Shekel Insulator 3 , Weasel Conductor , Thruster Brack 21 Kgs. Pressure For Cane Unloader , Digital Millimeter Dp-800 Pocket Size -Sanwa Make , Fuse Base 125 Amp-Vaishno Make. , Change Over Switch 400 Amp .-Havells/Kenber Make , Change Over Switch 630 Amp.-Havells/Kenber Make , Miltimeter -Sanwa Make , Dz Fuse 32A B/L , Dz Fuse 35A-B/L , Dz Fuse 63A-B/L , Meager 1000 V Digital -Motwani , Hydraulic Crimping Lug Machine Hand Type , Arc Chute 3Ta-28 -Siemens , Semiconductor Fuse 50 Amp.Gsa-Siemens , Tube Light Side Holder 40 Watt-Anchor , Spare Moving Contact For 3Ta-28 Contactor -Siemens , Spare Moving Contact For 3Ta-24 Contactor-Siemens , Gauge Ring For Dz Fuse 25 Amp-B/L , Gauge Ring For Dz Fuse 35 Amp.B/L , Volt Meter 0-500-A/E , Kilowatt Meter 135X135 2000 Watt-A/E , Kvar Meter 135X1352400-A/E , Pvc Coated Copper Flex. Wire 16 Corex1.5Mm , Resistance 27E40 , Dz Fuse Base 3 Phase Bl Make 25Amp.-B/L , Dz Fuse Base3 Phase Bl Make 63Amp-B/L , Continuity Tester Taparia , Bakalite Rod 2X2 Ft , Arching Chamber 3Ta28-Siemens , Holder Backlite For 3Ta28 Contactor -Siemens , Holder Bakalite For 3Ta-24-Siemens , Bakelite Plate For Terminal Sk70430 , Bakelite Plate 250Amp.Switch Sk70349 , Electronic Speed Controller , Speed Regulator Sardine For Dyno Drive , S.C. Lamp Holder For Sv Lamp.250 Watt/400Watt , Auxiliary Contact 4 No+2Nc For 3Ta-28 Contactor-Siemens , Digital Power Factor Meter 3 Phase 3000/5 5.1/2X5.1/2 , Auxiliary Contact 4 No+4Nc For 3Ta-61 Contactor-Siemens , Pvc Cooling Fan Kec Vertical Motor 52X83mm , Power Cradle Terminal Assly For 4000 Amp.Acb-L&T , Jaw Contact For 4000 Amp. Acb-L&T , Tong Tester Micro Make Ac/Dc 1000 , Push Button Station 8Way Pendent Cob-64 For Crane , Tpn Switch 63 Amp-Kenber/Havells , Thinner 234 -Dr.Back , Copper/Aluminum Lug As Per Price List -Dowells , Complete Fitting And Accessories -Bajaj/Crompton , Tube Light/Hpsv/Mv Lamp/Bulb-Bajaj/Crompton , S.T. Bulb 500 Watt -Mysore , S.T.Bulb 300 Watt-Mysore , Ictp Main Switch 100 Amp-Kenber , Ictp Main Switch 63 Amp-Kenber , Ictp Main Switch 32 Amp-Kenber , Energy Meter , Ff Switch 32 Amp-L&T , Ff Switch 63 Amp-L&T
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 3
Uttar Pradesh View Result →
14.
Agriculture #9478712 Technical Bid
Tender For supply of Belrayan General Electrical Goods , Bakelite Fuse Base 16 Amp/Ee Type , Bakelite Fuse Base 32 Amp/Ee Type , Bakelite Fuse Base 63 Amp/Ee Type , Bakelite Fuse Base (Kit Kat) Type 125 Amp. , English - Electric Type Fuse - 4 Amp. , English - Electric Type Fuse - 6 Amp. , English - Electric Type Fuse - 10 Amp. , English - Electric Type Fuse - 16 Amp. , English - Electric Type Fuse - 32 Amp. , English - Electric Type Fuse - 63 Amp. , Star Delta Timer 800Xa (0-10 Set) Select Make , Star Delta Timer 0-60 Sec Select/ Abb Make , Star Delta Timer 0-120 /Sec Select/Abb Make , Carbon Brush With Tail Metaic Grade - M145-E Size - 45X32x20 , Carbon Brush With Tail Metaic Grade - M145-E Size - 45X40x20 , Graphite Carbon Brush With Tail Grade Eg-224, Size - 50 X32 X 20 , Graphite Carbon Brush With Tail Grade Eg-224, Size - 40 X32 X 16 , Racker For 1.5 Mw Jyoti Make Alternator , Racker For 120 Hp Slip Ring Motor Kec Make , Racker For 250 Hp Slip Ring Motor Kec Make , Racker For 450 Hp Slip Ring Motor Kirlosker Make , Racker For 400 Hp Slip Ring Motor Kec Make , Racker For 300 Hp Slip Ring Motor Kec Make , Racker For 5 Hp Slip Ring Motor Bb Make , Racker For 7.5 Hp Slip Ring Motor Kec Make , Racker For 200 Hp Dc Motor Kec Make , Racker For 300 Hp Dc Motor Kec Make , Insulating Plair 8/10 Taparia Make , Continuity 3 Vdc , Screw Driver 10, Taparia Make , Phase Tester , Socket Set Upto 32Mm, Taparia Make , Screw Driver 14 Taparia Make , Meggar 500 Vdc , Meggar 1000 Vdc , Tonge Tester Upto 1000 Amp Meco Make , Crimping Machine Hydraulic Upto 400 Sqmm , Aluminium Crimping Lug Dowells Make As Per List Size , Copper Crimping Lug, Dowells Make As Per List Size , Thinner T-234, Dr. Beck Make , Insulating Varnish Elmo-Luft-1A, Dr. Beck Make , Insulating Varnish Backet Red, Dr. Beck Make , Pvc Tape Steel Grip 3/4 In Different Colors , Empair Tape Roll Size - 1 , Empair Tape Roll Size - 3/4 , Glass Fiber Tape Roll Size- 1 , Glass Fiber Tape Roll Size 3/4 , Cotton Tape Roll Size - 1 , Cotton Tape Roll Size - 3/4 , Crc - 2.26 Dc, 200 Ml Pack , Cable Trolly Complete With Wheel For Cane Unloader , Black Insulation Tape 1 , Aluminium Ladder 20 Feet Long, Self Support , Dowcll Paste , Air Blower, Bosch Make Gbl-650 Watt , Brasso, 100 Ml , Brasso - 500 Ml , Proximity Switch Pnp-No, Jayashree Make , Push Button Box 8 Way, With Control On & Off Pvc For Mill Crane. , Push Button Box 2 Way On & Off In Cast Aluminium Housing Complete. , Push Button Element - No. Technic Make , Limit Swtich Bohmen Make - 10A, 500 Vac, 1No+1Nc-Ls01 , Push Button Red , Push Button Green , Push Button Element Nc , Diode Pao- C- 89 M (Forword) , Diode Pao- C- 89 R (Reverse) , Diode Pao- C- 321 Umr - 200G , Diode Pao- C- 321 Umr - 200G , Industrial Heater U-Type, 3 Mtr Long. , Heater Element 1500/2000 Watt , Hydraulic Thruster For Cane Unloader , Glass Sleeve Without Varnish White - 05Mm , Glass Sleeve Without Varnish White - 08Mm , Glass Sleeve Without Varnish White - 10Mm , Glass Sleeve Without Varnish White - 12Mm , Film Coated Leatherise Sheet , 3 Phase 4 Wire Ctr Type Energy Meter , Exhaust Fan 18 - 1400 Rpm Crompton Make , Exhaust Fan 24 - 900 Rpm Crompton Make , Copper Flexible Bush Bar With Holes , Pvc Connector 10 Amp. , Pvc Connector 16 Amp. , Pvc Connector 25 Amp. , Pvc Connector 35 Amp. , Pvc Connector 40 Amp. , Oil Relay Phase Failure Vsp-D2-30-70 Amp , Wd -40, Multipurpose Cleaning Spray-420 Ml , Current Transfer (C.T.) 100/5 Round Shape , Current Transfer (C.T.) 150/5 Round Shape , Current Transfer (C.T.) 250/5 Round Shape , Current Transfer (C.T.) 400/5 Round Shape , Current Transfer (C.T.) 600/5 Round Shape , Current Transfer (C.T.) 800/5 Round Shape , Ampere Meter, Make 96 X 96100/5 , Ampere Meter, Make 96 X 96150/5 , Ampere Meter, Make 96 X 96250/5 , Ampere Meter, Make 96 X 96400/5 , Ampere Meter, Make 96 X 96600/5 , Ampere Meter, Make 96 X 96800/5 , Ampere Meter, Make 96 X 961000/5 , Ampere Meter, Make 96 X 961600/5 , Ampere Meter, Make 96 X 962000/5 , Digital Power Factor Meter 96 X 96 Ae Make , Digital Frequency Meter 96 X 96 Ae Make , Digital Multimeter 96 X 96 Ae Make , Digital Kw Meter 96 X 96 Ae Make , Volt Meter 96 X 96 0-500 Vac , Pvc Motor Cooling Fan 03 Hp, Pilot Bore , Pvc Motor Cooling Fan 5 Hp, Pilot Bore , Pvc Motor Cooling Fan 7.5 Hp, Pilot Bore , Pvc Motor Cooling Fan 10 Hp, Pilot Bore , Pvc Motor Cooling Fan 15 Hp, Pilot Bore , Pvc Motor Cooling Fan 20 Hp, Pilot Bore , Pvc Motor Cooling Fan 25 Hp, Pilot Bore , Pvc Motor Cooling Fan 30 Hp, Pilot Bore , Pvc Motor Cooling Fan 40 Hp, Pilot Bore , Pvc Motor Cooling Fan 50 Hp, Pilot Bore , Pvc Motor Cooling Fan 60 Hp, Pilot Bore , Pvc Motor Cooling Fan 75 Hp, Pilot Bore , Pvc Motor Cooling Fan 100 Hp, Pilot Bore , Pvc Motor Cooling Fan 120 Hp, Pilot Bore , Pvc Motor Cooling Fan 150 Hp, Pilot Bore , Teco Coil For 20Hp Dyno Drive Motor , Execution Coil For 20Hp Dynodrive Motor , Carban Brush With Tail Metalic Grade M145e Size-50X50x25 , Carban Brush With Tail Metalic Grade M145e Size-40X32x15 , Carban Brush With Tail Metalic Grade M145e Size-50X32x20
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 3
Uttar Pradesh View Result →
15.
Agriculture #9443903 Technical Bid
tender for SUPPLY OF ELECTRIC GOODS ITEMS - ELECTRIC GOODS ITEMS 2 Tumbler Switch 5 Amp. Kay-555 Make 3 Tumbler Switch 15 Amp.Kay-555 Make 4 Peano Type Switch 5 Amp Anchor Make 5 Peano Type Switch 15 Amp Anchor Make 6 Porcline 5 Amp 3 pin plug base Kay-555 Make 7 Porcline 15 Amp 3 pin plug base Kay-555 Make 8 PVC Tape 3/4 X10 Meter Steel Grip Make 9 Cotton Tape 3/4- Kamal Brand 50mtr. 10 Cotton Tape 1 --Kamal Brand 50mtr. 11 Empire Tape 3/4 Kamal Brand 50m. Roll 12 Empire Tape 1 Kamal Brand 50m. Roll 13 Fibre Glass cloth 10mile/meter Kamal Make 14 Plastic leathraid sheet 5 mile 15 Plastic leathraid sheet 7.5 mile 16 Plastic leathraid sheet 10 mile 17 Plastic filim paper 5 mill 18 Plastic filim paper 7.5 mill 19 Fibre Glass sleeve 1mm 20 Fibre Glass sleeve 2mm 21 Fibre Glass sleeve 3mm 22 Fibre Glass sleeve 4mm 23 Fibre Glass sleeve 5mm 24 Fibre Glass sleeve 6mm 25 Fibre Glass sleeve 8mm 26 Fibre Glass sleeve 10mm 27 Fibre Glass sleeve 12mm 28 Condensor 2.5mfd. 29 Condensor 3.15mfd 30 Condensor 4mfd 31 Condensor 6mfd 32 C.T.C. B.D.H.(400Ml Bottle) 33 C.R.C. 2.26 / 5.66 Bharat Bijlee (300 M.L.) 34 Soldering paste 100 Gram 35 PVC copper wire national make 1 coreX 1.5mm2 36 PVC copper wire national make 2 core X4mm2 37 T.P. Switch Standred Make 16 Amp. 38 T.P. Switch Standred Make 32 Amp. 39 T.P. Switch Standred Make 63 Amp. 40 D.P. Switch 32 Amp. Standred Make 41 P.T.Bulb 60W/100W. ( 230V) Crompton/Bajaj/Philips (As per P.P.L.) 42 P.T. Bulb 60W 24 Volt Crompton/Bajaj/Philips (As per P.P.L.) 43 S.T. Bulb 60W/100W Crompton/Bajaj/Philips (As per P.P.L.) 44 3 Pin P.T. HPMV Lamps 125W Philips/ Crompton/ Bajaj Make(As per P.P.L.) 45 S.T. HPMV Lamps 125 W.Philips/ Crompton/ Bajaj Make(As per P.P.L.) 46 S.T. HPMV Lamps 250 W. Philips/ Crompton/ Bajaj Make(As per P.P.L.) 47 S.T. HPMV Lamps 400 W. Philips/ Crompton/ Bajaj Make(As per P.P.L.) 48 S.T. HPSV Lamps 250 W. Philips/ Crompton/ Bajaj Make(As per P.P.L.) 49 S.T. HPSV Lamps 400 W. Philips/ Crompton/ Bajaj Make(As per P.P.L.) 50 Electronic Choke 40 WPhilips/ Crompton/ Bajaj Make(As per P.P.L.) 51 Copper Choke 40 WPhilips/ Crompton/ Bajaj Make(As per P.P.L.) 52 Copper Choke 125 W HPMV lamps Philips/ Crompton/ Bajaj Make(As per P.P.L.) 53 Copper Choke 250 W HPMV lampsPhilips/ Crompton/ Bajaj Make(As per P.P.L.) 54 Copper Choke 400 W HPMV lamps Philips/ Crompton/ Bajaj Make(As per P.P.L.) 55 Copper Choke 250 W HPSV lamps Philips/ Crompton/ Bajaj Make(As per P.P.L.) 56 Copper Choke 400 W HPSV lamps Philips/ Crompton/ Bajaj Make(As per P.P.L.) 57 Tube Holder 58 Halogen Holder 59 Soldering iron 35W. 60 Pure Tin 61 Soldring wire 62 W/s flaxable wire Two Core 23/76 Mayoor Make/Vidut Make for National Make 63 W/s flaxable wire Three Core 23/76Do 64 W/s flaxable wire Three Core 40/76Do 65 P.V.C. Wire Aluminiam conductor 1.5mm Single Core Do 66 P.V.C. Wire Two Core Aluminiam conductor 2.5mmDo 67 P.V.C. Wire Two Core Aluminiam conductor 4mm Do 68 P.V.C. Wire Two Core Aluminiam conductor 6 mm Do 69 P.V.C. Wire Singal Core Copper conductor 7/20 Copper Do 70 Halam Sheets 1/4X1 Meter 71 Halam Sheets 1/2X1 Meter 72 Halam Rod 3/4X1 Meter 73 Halam Rod 1X1 Meter 74 Halam Rod 11/2X1 Meter 75 PD type Amp meter 0-15,0-30Amp AE make 4 76 Flash type Amp meter 0-15,0-30 Amp AE make 100mmX100mm 77 PD type Amp meter 0-75 Amp CTR 75/5 AE Make 78 Flash type Amp meter 96x96,0-75,CTR 75/5 79 Flash type Amp meter 96x96,0-150Amp 80 Flash type Amp meter 96x96,0-300 amp CTR300/5 81 Flash type Amp meter 0-400Amp 96x96 82 Flash type Amp meter 0-600Amp CTR 600/5 83 Volt meter flash type 0-600,96x96 84 Volt meter flash type 0-600,144x144mm 85 Flash type Ammeter 0-100 Amps CTR 100/596X96mm 86 Flash type Ammeter 0-800 Amps CTR 800/5 87 Flash type Ammeter 0-200 Amps CTR 200/5 88 Flash type Ammeter 0-1000 Amps CTR 1000/5 89 C.T. 50/5 Ratio 90 C.T. 75/5 Ratio 91 C.T. 100/5 Ratio 92 C.T. 150/5 Ratio 93 C.T. 200/5 Ratio 94 C.T. 300/5 Ratio 95 C.T. 400/5 Ratio 96 C.T. 600/5 Ratio 97 C.T. 800/5 Ratio 98 Allu. Lugs all size dowells make 99 Copper lugs size dowells make 100 Power capacitor 3 face 25KVAR Asian make 101 Thyrestor protection semi conductor fuse 450Amp Star/Germany make 102 Pure carbon brush 32x12.5x40mm grade EG 224 103 Carbon holder for GQ4 WolfMake 104 Carbn holder for GQ 6 Wolf Make 105 Armature for wolf make GQ 4 Grinder 106 Armature for wolf make GQ 6 Grinder 107 Amp meter6sq. 0-300 Amp AE Make 108 Bare Copper conductor 49WG S.W.G./65.W.G. 109 Silipring for 2000 KW Alternator Jayoti Make 110 (a)Silipring for 550 HP A.E.I. Make 111 (b)Silipring for 350 HP A.E.I. Make 112 (c)Silipring for 250 HP A.E.I. Make 113 Silipring for 150 HO K.E. Make Motor 114 Silipring for 75 KW/100 H.P. K.E. Make 115 Silipring for 50 H.P. K.E.Make 116 Silipring for 10 H.P. G.E.C. Make Motor 117 Silipring for 5 H.P. G.E.C. Make Motor 118 Silipring for 125 H.P. N.G.E.F. Make Motor 119 Carbon Holder for 125 H.P. N.G.E.F. Make Motor 120 Carbon Holder for 550/350/750 H.P. A.E.I. Make Motor 121 Carbon Holder for 150 H.P. K.E. Make Motor 122 Carbon Holder for 75 H.P. K.E. Make Motor 123 Carbon Holder for 10 H.P. G.E.C. Make Motor 124 Carbon Holder for 5 H.P. G.E.C. Make Motor 125 Carbon Holder for 50 H.P. K.E. Make Motor 126 Pure Carbon Size 20X30X40 Grade EQ 114 127 Carbon Brush for wolf make GQ 4 Grinder 128 Carbon Brush for wolf make GQ 6 Grinder 129 Carbon Brush for Angle Grinder Portable Hitachi Make 130 Pure Carbon Strip Size 20X20X100mm 131 Pure Carbon Strip Size 25X25X100mm 132 Power Factor meter 6 133 Thinner 205 Dr. Back make 134 Adjustable Plastic Cooling Fan 15H.P. 135 Do but 25 H.P. 136 M.C.B Single Pole 20Amp. 137 Endshiled 16 Amp. 138 do but 32Amp. 139 Do but 63Amp. 140 Action Bar 16Amp. 141 Do but 32Amp. 142 Do but 63Amp. 143 Timer EM-2000 144 Limit Switch LL-1 BCH Make 145 Diodes 321UM 100 Revers 146 Diodes 321UM 100 Forwerd 147 ABC 16Amp 240V. 148 Synchomes Timer EM-1000 02 No+02NC 220V. 0-30Sec. 149 Do but 0-60 Sec. 150 Kit Kat Fuse With Carrier 32Amp. 151 Bkt Kit Kat 63Amp. 152 D.C. Amp. Meter 4X4 0-10Amp. 153 Brasso in 100Ml 154 Carbon Bush Garde M-15E 50X40X20mm 155 No. Volt Coil for OCB 415V. 156 Fixed FingerContact for 600Amp OCB 157 Moving Arching for 600Amp. OCB 158 M.C.B 10Amp. 159 do but 16Amp. 160 Brass Rod 3/4X4 161 Abonite Rod 1.5X3 162 Potentio Meter 600 Amp 163 C.T.2000/5Amp. 164 Carbon Brush 16X32X35mm 165 C.T.1200/5Amp 4 Round 166 Penumatic Timer 0-180 Sec.230 Volt BCH Make 167 Element for Above 2No+02NC BCH Make 168 H.R.C. Fuse TIA 32 Amp 169 Do but Size TIS 63Amp 170 Program Switch 16Amp SRP-126C 171 Fuse Base With Carriar 125 Amp 172 Shield ed cable 1mm SqX2 Core 173 G.I. Wire 10 SWG 174 M.C.B. Hevails Make 3 Pol 63 Amp 175 M.C.B. Hevails Make 3 Pol 32 Amp 176 M.C.B. Hevails Make 3 Pol 25 Amp 177 M.C.B. Hevails Make 2 Pol 20 Amp 178 Condensir/ Capacitor 22 MFD 440 VAC 179 Condensir/ Capacitor 33 MFD 440 VAC 180 Condensir/ Capacitor 16 MFD 440 VAC 181 Condensir/ Capacitor 12 MFD 440 VAC 182 Condensir/ Capacitor 10 MFD 440 VAC 183 Ampeir Meter Size 96X96mm 0 Amp- 10 Amp AC/DC Rishab Make 184 K.W. Meter 0-2000 KWCTR- 3000/53 Phase 415 VACSize 144mmX144mmI.M.P. Make 185 K.W. Meter 0-2640 KWC.T.R. 3300/5440 VAC Size 144mmX144mm I.M.P. Make 186 Altar Nator Podistal BearingJyoti LTD BarodaStyle No 1B119-00AABrg Size 152.4 MMJSr No -522Date 01-05-88 187 Power Thyrister T 16 N 800 BU Usha Make 188 Starting Diode58 AN 20 A Normal Polonity 189 Potantio Meter 500--- 3 Watt Wire Wound 190 Potantio Meter 5 K 1 Watt 191 Slip Residence Box 10 H.P. Heavy Duty use for 10 H.P. Slipring Motor 192 Slip Residence Box 05 H.P. Heavy Duty use for 5 H.P. Slipring Motor 193 Water Liqurid Residence Box Heavy duty Made Body SS Material use for slipring Motor 194 Timer B.C.H. Make Range 0-120 Sec. 220 VAC Single Mound 195 TPN Switch 63 Amp FFOL & T Make 196 M.C.C BANDREW YULE MAKE 3 Pol 415 VAC NFC – S103 3 Pol 415 VAC 100 Amp 197 Mashroom Type Push Button Red & Green L & T Make 198 Push button Element L & T Mke 10 Amp 250 VAC 1 NO+1NC 199 Fuse Kit Kat Backalite HF Type 32 Amp L & T 200 Real Insulator Proshalen 5 “ Lenth 201 Semi Conductor Fuse 600 V 630 Amp MMT- B1 202 Power Thyristor MCC 330 A In FNU Make 203 Power Thyrisot MCC 450 Amp INFNU Make 204 PVCMotor Colling Fan Heavy Duty 3 HP. 205 Do but Size 5 H.P. 206 Do but Size 7.5 H.P. 207 Do but Size 10 H.P. 208 Do but Size 20 H.P. 209 Do but Size 25 H.P. 210 Do but Size 30 H.P. 211 Glass Sleeve 15mm 212 Do but Size 20mm 213 Do but Size 25 mm 214 Push Button Station ON/Off Type Complete L & T 215 M.C.B. 3 Pole 25 Amp Haveels Make 216 Do but Size 32 AMP 217 Do but Size 63 Amp 218 L.E.D. Indi Cating Lamp Red 219 Do but Size Yellow 220 Do but Size Green 221 Amp Meter AE Make 96X96,0 to 25 Amp 222 Do but Size 0 to 30 Amp CTR 30/5 223 Do but Size 0 to 60AmpCTR 60/5 224 Do but Size 0 to 100 AmpCTR 100/5 225 Do but Size 0 to 200 Amp CTR 200/5 226 Do but Size 0 to 250 Amp, CTR 250/5 227 Do but Size 0 to 600 Amp, CTR 600/5 228 P.T. Holder 100 Watt 229 Heavy Duty Current Conductor 6 SWG 230 I.C.D.P. Mai Swich 63 Amp Standard Make 231 DC Motor Rokar Arm As per Sample 232 Carbon Bush Holder 12.5X32 As per Sampe 233 Bkt. Moving Finger PC- 4/6 234 Bkt. Moving Finger PC-2/3 235 Carbon Brush 12.5X32X40mm 236 Leatherised Paper E- Class 5mile 237 Potentio Meter 500 Ohm RW-3 238 Potentio Meter 5K RW-1 239 Glass Fuse 20mm 1 Amp 240 Starting Diode S-8 AN 20/25 Rverse 241 SartingDiode S-8 AN 20/25 Forward 242 Push ButtomPendent 9 Way as per Diagram 243 Glass Tape 1” 244 Nicrome Wire 245 Proximity Switch NC 30 VDC 50mm Dia 246 Proximty Switch PNP No 30 Volt DC 247 TPN Switch FAC 100 248 Carbon Brush H.D. 25X50X65 249 Carbon Brush 10X20X30 250 Copper Strip 25X25X100 251 Carbon Bush Copper 20X20X100 252 Do but Size 25X25X100 253 Porciline Kit Kat 63 Amp 254 ICTP Main Switch 32 AMP 255 P.V.C. CollingFan 05 H.P. Motor 256 Do but Size 7.5 H.P. 257 Alluminum Cooling Fan 25 H.P. Motor NGEF Make 258 Alluminum Cooling Fan 20 H.P. Motor NGEF Make 259 Exhaust Fan Blade 18 260 RPM Meter 72X72M ( 0-1500 RPM) ( 4-20MA) 261 Proximatory Switch PNP-10-30 Volt DC 262 Aluminum Casting Fan for 5 HP Motor Make- NGEF 263 Aluminum Casting Fan for 10 HP Motor Make- NGEF 264 Aluminum Casting Fan for 15 HP Motor Make- NGEF 265 Aluminum Casting Fan for 30 HP Motor Make- NGEF 266 Length of Slip Ring 62 mm 267 Singal Isolator Converter Input 4-20 MA Output 4-20 MA 268 HPSV Choke 400 Watt 269 HPSV Lamp 400 Watt 270 Ignitor for SV Lamp 271 ST Holder 400 Watt 272 Condenser 33 MFD 273 Adjustable Plastic Cooling fan for 15 HP Motor 274 Aluminum Casting fan for 5HP Motor Make- NGEF/BB 275 Aluminum Casting fan for 10HP Motor Make- NGEF/BB 276 Aluminum Casting fan for 15HP Motor Make- NGEF/BB 277 Aluminum Casting fan for 20HP Motor Make- NGEF/BB 278 Aluminum Casting fan for 25HP Motor Make- NGEF/BB 279 Aluminum Casting fan for 30HP Motor Make- NGEF/BB 280 Proximity Sensor, PNP NC 25mm Outer Diameter 50mm as per Diagram 281 Crimpling Die R-1 To R-14 for Dowells Make Hydraulic Machine 282 Dr. Beck Lufta 1A 283 Dr. Beck Bectrol Red 284 Dr. Beck Bectrol Grey 285 Insulating Mixture 286 Brasso 100Ml 287 Heating Element 1500 Watt 288 Push Button Actuator Suitable for ZBE-102N Element 289 Jyoti Make AVR Carel Card No.-21,22,23 290 Flash Type Amp Meter Size 96X96,0-50 Amp, CTR-5015, Make-AE 291 Pure Carbon Brush for Leveller and Fibrize Size-22X32X40mm Grade-M-13 292 New Hydraulic Thruster 25 Kg With Brakes Assembly-250mm 293 LED Indicating Lamp Yellow,220V AC 294 Flash Type Amp. Meter 0-1000 Amp, CTR-100015 Size-144X144, Make-AE 295 3 Pole Change Over Switch 32 Amp., 415 Volt AC Make-L&T,SKYU 296 Complete foot Switch with 2 Element, Make-BCH
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Uttar Pradesh View Result →
16.
Agriculture #9441526 Technical Bid
tender For the Supply of Electric/Lighting Goods. - Ex-Godown Site Including Freight Rate, Supply Of General Electricals, Fittings Accessories From Reputed Suppliers/Manufacturers Ex-Godown Site Including Freight Rate, Supply Of General Electricals, Fittings accessories From Reputed Suppliers/Manufacturers , Supply Of Electric/Lighting Goods. , Insulating Varnish Elmolufta-1, Dr. Back Make , Insulating bectrol Red, Dr. Back Make , Insulating Thinner 205 Dr. Back Make , P.V.C. Tape Steel Grip 3/4, -Bhor , Cotton Tape 3/4 , Empire Tape 3/4 , Glass Tape 3/4 , H.T. Black Tape 3/4-J&J Make , No Vexpaper 7Mill & 10Mill -Crimple Make , Leathered Paper 7Mill & 10Mill, Crimple Make , C.T.C. , Crc2-26 , S.T. Holder 300/500 Watt -National Make , S.T. Holder 100 Watt, -National Make , Condensor 2.5 Mfd. Usha/Asian Make , Condensor 4 Mfd.-Usha/Asian , Condenser 33 Mfd. Usha/Asian Make , Power Capacitor -Usha/Asian Make , Bare Copper Wire 6Swg & 8 Swg , Bakalitekit Kat 63 Amp.-Ee Make , Backalitekitkat 100 Amp. -Ee Make , Potensio Meter 500V 3Rk-Pankaj Make , Phase Tester Pocket Type Set-Pankaj Make , Insulated Plier 8-Taparia Make , Insulated Screw Driver-Taparia Make , Insulated Screw Driver 12 -Taparia Make , Hrc Fuse 4Amp.-Ee Make , Hrc Fuse6amp.-Ee , Hrc Fuse 10Amp.-Ee Make , Hrc Fuse 16 Amp.-Ee Make , Hrc Fuse 63 Amp.-Ee Make , Pedestal Type Amper Meter 4 Dial 0-30-Ae Make , Pedestal Type Amper Meter 4 Dial 0-60A -Ae Make , Padistal Type Amper Meter 4 Dial 0-100Am E-Ae Make , Padistal Type Amper Meter 4 Dial 0-100 Ctr100/5 -Ae Make , Padistal Type Amper Meter 4 Dial 0-200 Ctr200/5-Ae Make , Padistal Type Amper Meter 4 Dial 0-300Ctr300/5-Ae Make , Padistal Type Amper Meter 4 Dial 0-400 Ctr400/5-Ae Make , Padistal Type Amper Meter 4 Dial 0-500 Ctr500/5-Ae Make , Padistal Type Amper Meter 4: Dial 0-600 Ctr600/5 -Ae Make , Squire Type Amper Meter 4 Dial 2505 Fuse Type-Ae Make , Squire Type Amper Meter 4 Dial 400/5 Flush Type-Ae Make , Squire Type Amper Meter 4 Dial 600/5 Flush Type-Ae Make , Squire Type Amper Meter 4Dial 800/5 Flush Type-Ae Make , Squire Type Amper Meter 4 Dial 1000/5 Flush Type -Ae Make , Squire Type Amper Meter 4 Dial 3000/5 Flush Type -Ae Make , C. T. 100/5 To 400/5 Flush Type , Plastic Cooling Fan Any Motor 5 Hp , Plastic Cooling Fan Any Motor 7.5Hp , Plastic Cooling Fan Any Motor10hp , Plastic Cooling Fan Any Motor 15 Hp , Plastic Cooling Fan Any Motor 20 Hp , Plastic Cooling Fan Any Motor 30 Hp , Plastic Cooling Fan Any Motor 40 Hp , Plastic Cooling Fan Any Motor60 Hp , Aluminium Cooling Fan Any Motor 15 Hp , Aluminium Cooling Fan Any Motor 40 Hp , Aluminium Cooling Fan Any Motor 60Hp , Pvc Copper Wire -National , Pvc Flexible Copper Wire 7/16X1core -National , Pvc Flexible Copper Wire 7/16X2core-National , Pvc Flexible Copper Wire 19/16X1core-National , Metalic Carbon Bush With Tail 22X32x40mm-Aling , Brass Holder For Above-Aling Make , Slipring For 250 H.P. Motor.Id-72Mm,Od-196Mm,L-140Mm , Slipring For 150 Kw Injection Motor Id-68Mm,Od-185,L-130Mm , Non Metallic Carbon Bush For Cane Unloader 20X20x100mm -Aling , Brass Holder For Above-Aling Make , Metallic Carbon Bush With Tail 10X25x40 For 80 Hp Motor , Carbon Holder For Above As Per Sample-Aling , Slip Ring For 80 Hp Motor Crompton Size Id-60Mmod-120Mm Length 75Mm , Metallic Carbon Bush 20X32x40mm For 150 Hp Motor-Aling Make , Brass Holder For Above-Aling Make , Slip Ring For 150 Hp Kec Motorid-68Mm,Od-180Mm,L-132 , Metalic Carbon Bush With Tail 16X32x40-Aling Make , Brass Holder For Above , Slip Ring For 75 Hp Kec Motor Id-45Mm Od-125Mm L-115Mm , Non Metallic Carbon Bush With Tail For 400 Hp D.C. Motor Size 20X32x36mm -Aling Make , Holder For Above , Fix Arching Contact 400 Amp. Ocb -Mei , V- Bar For 400 A Ocb-Mei , Moving Contact L Type 400 Amp.-Mei , Arching Contact 400 A-Mei , Fix Plate 630 Amp. , Glass Fuse 10 Amp. , Scr Dcr Thruster 1515 Sg , Rotary Switch 25 Amp. -Thakur , Diode 16 Mfr , Diode 40 Mr100 , Diode Ps 040 Cur F10 , Diode 5408 , Diode 321 Um100 , Diode 321 Umr100 , Mush Room Type Push Baton 10 Amp. -Vaishno Make , Contact Element For Aobve10 Amp.-Vaishno Make , Shekel Insulator 3 , Weasel Conductor , Thruster Brack 21 Kgs. Pressure For Cane Unloader , Digital Millimeter Dp-800 Pocket Size -Sanwa Make , Fuse Base 125 Amp-Vaishno Make. , Change Over Switch 400 Amp .-Havells/Kenber Make , Change Over Switch 630 Amp.-Havells/Kenber Make , Miltimeter -Sanwa Make , Dz Fuse 32A B/L , Dz Fuse 35A-B/L , Dz Fuse 63A-B/L , Meager 1000 V Digital -Motwani , Hydraulic Crimping Lug Machine Hand Type , Arc Chute 3Ta-28 -Siemens , Semiconductor Fuse 50 Amp.Gsa-Siemens , Tube Light Side Holder 40 Watt-Anchor , Spare Moving Contact For 3Ta-28 Contactor -Siemens , Spare Moving Contact For 3Ta-24 Contactor-Siemens , Gauge Ring For Dz Fuse 25 Amp-B/L , Gauge Ring For Dz Fuse 35 Amp.B/L , Volt Meter 0-500-A/E , Kilowatt Meter 135X135 2000 Watt-A/E , Kvar Meter 135X1352400-A/E , Pvc Coated Copper Flex. Wire 16 Corex1.5Mm , Resistance 27E40 , Dz Fuse Base 3 Phase Bl Make 25Amp.-B/L , Dz Fuse Base3 Phase Bl Make 63Amp-B/L , Continuity Tester Taparia , Bakalite Rod 2X2 Ft , Arching Chamber 3Ta28-Siemens , Holder Backlite For 3Ta28 Contactor -Siemens , Holder Bakalite For 3Ta-24-Siemens , Bakelite Plate For Terminal Sk70430 , Bakelite Plate 250Amp.Switch Sk70349 , Electronic Speed Controller , Speed Regulator Sardine For Dyno Drive , S.C. Lamp Holder For Sv Lamp.250 Watt/400Watt , Auxiliary Contact 4 No+2Nc For 3Ta-28 Contactor-Siemens , Digital Power Factor Meter 3 Phase 3000/5 5.1/2X5.1/2 , Auxiliary Contact 4 No+4Nc For 3Ta-61 Contactor-Siemens , Pvc Cooling Fan Kec Vertical Motor 52X83mm , Power Cradle Terminal Assly For 4000 Amp.Acb-L&T , Jaw Contact For 4000 Amp. Acb-L&T , Tong Tester Micro Make Ac/Dc 1000 , Push Button Station 8Way Pendent Cob-64 For Crane , Tpn Switch 63 Amp-Kenber/Havells , Thinner 234 -Dr.Back , Copper/Aluminum Lug As Per Price List -Dowells , Complete Fitting And Accessories -Bajaj/Crompton , Tube Light/Hpsv/Mv Lamp/Bulb-Bajaj/Crompton , S.T. Bulb 500 Watt -Mysore , S.T.Bulb 300 Watt-Mysore , Ictp Main Switch 100 Amp-Kenber , Ictp Main Switch 63 Amp-Kenber , Ictp Main Switch 32 Amp-Kenber , Energy Meter , Ff Switch 32 Amp-L&T , Ff Switch 63 Amp-L&T
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 3
Uttar Pradesh View Result →
17.
Agriculture #9433698 Technical Bid
Tender For Competitive E-Bidding For Supply Of General Electrical Items For Season 2024-25 , Pvc Insulating Tape, Steel Grip Size 3 / 4X10m , Empire Tape Size 3 / 4X50m , Empire Tape Size 1X50m , Glass Varnished Tape Size 3 / 4X50m , Glass Varnished Tape Size 1X50m , Black Tape Size 3 / 4X10m Johnshon Make , Black Tape Size 1X10m Johnshon Make , Cotton Tapesize 1X50m Roll , Ctc 300Ml Bottle Bharat Bijli Make , Crc 2-26 400Ml, Bharat Bijli Make , Insulation Varnish Elmo-Luft Ia1 Kg, Dr Back Make , Thinner 218 For Above Varnish, Dr Back Make , Beck-Tol Red & Grey 1 Kg, Dr Back Make , Phase Tester Taparia Make , Combination Plier 8 Taparia / Tata Agrico / Wulf Make , Nose Plier 8 Taparia / Tata Agrico / Wulf Make , Continuity Tester With Cell , Insulation Tester ( Megger ) Infinity To Zero Ohms 500V , Digital Multi-Meter For Resistance, Volts, Ma Testing Fluke / Htc / Meco Make , Tong Tester1000ampere, Volts, Resistance Testing Fluke / Htc / Meco Make , Padent Holder 100 Watts, 2 Pin, 240 Volts , Button Holder 100 Watts, 2 Pin, 240 Volts , Angle Holder 100 Watts, 2 Pin, 240 Volts , S.C. Holder100 Watts, 240 Volts , Flush Type Switch 5Amp, 240 Volts, Anchor / Havells Make , Flush Type Switch 15Amp, 240 Volts, Anchor / Havells Make , Flush Type Switch Combined Switch-Socket5amp, 240 Volts, Anchor / Havells Make , Flush Type Switch Combined Switch-Socket 15Amp, 240 Volts, Anchor / Havells Make , Flush Type Socket 5Amp, 3Pin, 240 Volts, Anchor / Havells Make , Flush Type Socket15amp, 5Pin, 240 Volts, Anchor / Havells Make , Plug Top5amp, 3Pin, 240 Volts, Anchor / Havells Make , Plug Top15amp, 3Pin, 240 Volts, Anchor / Havells Make , Ceiling Rose240volts, 5 Amp , Milinex Paper / Novex Paperf-Class, 5 Miles , Milinex Paper / Novex Paperf-Class, 7.5 Miles , Milinex Paper / Novex Paperf-Class, 10 Miles , Bakalite Kit-Kat16amp, 240 Volts , Bakalite Kit-Kat 32Amp, 240 Volts , Bakalite Kit-Kat 63Amp, 240 Volts , Fuse Carrier Bakalite 63Amp, 240 Volts , Copper & Alumunium Lugsall Sizes, Dowells Make ( Please Quote Maximum Discount On The Company Price List ) , Dowells Paste Tube / Corrosoin Tube , Screw Driversize 1 / 4X6, Taparia Make , Screw Driversize5 / 16X8, Taparia Make , Screw Driversize 3 / 8X10, Taparia Make , Screw Driversize 1 / 2X12, Taparia Make , D-Spaner Complete Set- 6Mm To 32Mm, Taparia Make , Ring-Spaner Complete Set- 6Mm To 32Mm, Taparia Make , Box Spaner Complete Set- 6Mm To 32Mm, Taparia Make , Electric Tool Kit Sd-192-Hs-8 41 Pieces- Screw Driver, Sockets & Bit Set , Electric Tool Kit42 Pieces 1 / 4 Socket Combination Set, Tiwan Make , Pvc Insulating Sheathed Copper Conductor Wire / Cable- All Sizes, Vidhut / National / Havells Make ( Please Quote Maximum Discount On The Company Price List ) , Pvc Insulating Sheathed Alumunium Conductor Wire / Cable- All Sizes, Vidhut / National / Havells Make ( Please Quote Maximum Discount On The Company Price List ) , Hylam Bakalite Sheet Isi Standard 1 / 4 Size Per Sqm , Hylam Bakalite Sheet Isi Standard 1 / 2 Size Per Sqm , Hylam Bakalite Sheet Isi Standard 3 / 4 Size Per Sqm , Bakalite Rod ( All Sizes ) Per Sqm / Kg , White Fibre Glass Rod ( All Size ) Per Sqm , Fibre Glass Tube 10Mm X 1M , Fibre Glass Tube12mm X 1M , Fibre Glass Tube 16Mm X 1M , Inductive Proximity Switch Sensing Distance 14Mm, 24 Vdc Pnp , Mtc Coil / Selonoid Coil- 220Volts Rotex Make , Mcb 1-Pole 6 Amp Havells / Standard / Schneider , Mcb 1-Pole 16 Amp Havells / Standard / Schneider , Mcb 2-Pole10 Amp Havells / Standard / Schneider , Mcb 2-Pole16 Amp Havells / Standard / Schneider , Mcb 2-Pole32 Amp Havells / Standard / Schneider , Mcb 2-Pole63 Amp Havells / Standard / Schneider , Mcb 3-Pole32 Amp Havells / Standard / Schneider , Mcb 3-Pole63 Amp Havells / Standard / Schneider , Mcb 4-Pole25 Amp, 440V, Havells / Standard / Schneider , Pvc Wire Alumunium Conductor Weather Proof 2Corex4mm², 90Mtrs, Vidhut / National / Havells Make , Pvc Wire Alumunium Conductor Weather Proof 2Corex2.5Mm², 90Mtrs, Vidhut / National / Havells Make , Push Button Station 1No + 1Nc, Vashno Make , Push Button With Element , Mushroom Type Push Button With Element , Foot Switch, 1No + 1Ncbch Make , Micro Switch, Bch Make , Limit Switch 1No + 1Nc Eussion Make , Limit Switch Ekement 1No + 1Nc Eussion Make , Dcr Thruster 604Se 1616 , Carbon Brushes Grade M15e- Double Leadsize 50X40x20mm , Carbon Brushes Grade M15e- Double Leadsize 40X32x20mm , Carbon Brushes Grade M15e- Double Leadsize 40X40x20mm , Carbon Brushes Grade M15e- Double Leadsize 45X15x15mm , Carbon Brushes Grade Eg-224-Double Lead Size 45X32x22mm , Carbon Brushes Grade Eg-224-Double Leadsize 40X32x12.5Mm , Carbon Brushes Grade Eg-224-Double Lead Size 40X32x20mm , Carbon Brushes Grade Eg-224-Double Lead Size 30X16x40mm , Carbon Brushes Grade Eg-224-Double Leadsize 50X32x16mm , Carbon Brushes Grade Eg-224-Double Leadsize 50X32x25mm , Carbon Brushes For Hand Grinder 4 / Ag4 Dewalt / Bosch Make , Carbon Brushes For Hand Grinder 7 / Ag7 Dewalt / Bosch Make , Armature For Hand Grinder 4 / Ag4 Dewalt / Bosch Make , Armature For Hand Grinder 7 / Ag7 Dewalt / Bosch Make , Brass Holder For Carbon Brush250 Hp Motor, Frame No. Tr-6 , Brass Holder For Carbon Brush170hp Motor / 1.5 Mw Alternator , Brass Holder For Carbon Brush100hp Motor , Brass Holder For Carbon Brush350 / 400Hp Motor , Brass Holder For Carbon Brush10 / 12.5Hp, Size 1 / 4X3 / 4 , Slip Ring 10 / 12.5Hp, 3- Pole , Slip Ring170hp, 3-Pole , Slip Ring265kw, 3-Pole , Pvc Motor Air Cooling Fanframe No.- 90L / 100L, 3Hp , Pvc Motor Air Cooling Fan Frame No.- 112M, 5Hp , Pvc Motor Air Cooling Fanframe No.- 132M, 10Hp , Pvc Motor Air Cooling Fanframe No.- 160M, 15Hp , Pvc Motor Air Cooling Fanframe No.- 180M, 20Hp , Pvc Motor Air Cooling Fan Frame No.- 200M, 25Hp , Pvc Motor Air Cooling Fanframe No.- 225L, 40Hp , Techo-Generator Dtg-4000 70Ma / 200Vdc At 4000Rpm , Techo-Generator Tdp-02-Lt100v Dc At 1000Rpm Hubner Make , Synchronous Timer Em-20000 To 120S, 2No+2Nc, 240 / 415V Ac , Synchronous Timer Em-10000 To 120S, 2No+2Nc, 240 / 415V Ac , Timer 2No+2Nc, 0 To 60 / 120S Gic Make , Dyno Drive Controller Complete Upto 50Hp Motor , Motor Heating Rod1m Long, 1000 / 1500W , Motor Heating Rod 1 / 2M Long, 2000W , Pvc Unarmoured Flexible Cable Copper Conductor Flat / Round4corex1.5Mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat / Round3corex2.5Mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat / Round 3Corex4mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat / Round3corex6mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat / Round3corex10mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat / Round3corex35mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat / Round3corex50mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat / Round1corex50mm² , Pvc Unarmoured Flexible Cable Copper Conductor Flat / Round1corex70mm² , Condenser 2.5 Mfd 240V , Condenser 3.15 Mfd 240V , Condenser4 Mfd 240V , Condenser6 Mfd 240V , Capacitor 25Kvar / 440Volt Oil Filled, Jaivik Make , Glass Sleeves4mm / 6Mm , Glass Sleeves8mm / 10Mm , Glass Sleeves 12Mm / 16Mm / 20Mm , Soldering Wire18 / 20 Swg, 250Gram Weight , Soldering Fluxeyer-7 100Ml , Soldering Iron 10W / 240V , Soldering Iron35w / 240V , Air Blower 1-Phase, 240V, 50Hz , Hot Air Blow Double Speedblower With Heater, 1-Phase, 240V, 50Hz , Copper Bus Bar ( Electrolyte ) Size 10Mmx50mm , Copper Bus Bar ( Electrolyte ) Size 12Mmx75mm , Shakle Insulatorsize 100X110mm , Shakle Insulator Size 95X100mm , Current Transformer ( Ct ) 15Va100 / 5A, 200 / 5A , Current Transformer ( Ct ) 15Va300 / 5A, 400 / 5A , Current Transformer ( Ct ) 15Va600 / 5A, 800 / 5A , Ampere Meter 96X96mm0 To100a , Ampere Meter 96X96mm 200A, 300A, & 400A , Ampere Meter 96X96mm 600A, & 800A , Voltmeter 96X96mm, 0 To 600V , Frequency Meter1-Phase / 240V, 50Hz , Frequency Meter 2-Phase / 415V 50Hz , Diode10 Ur 40 / 10 Ur 25 Pnp , Diode 10 Ur 40 / 10 Ur 25 Npn , Potentiometer 500 Ohms 3W / 500 Ohms 1W , Potentiometer 2K 1W, 5K 1W, 10K 1W , Terminal Connector6 Way, 16Amp, 240V , Terminal Connector12 Way 16Amp, 240V , Toggle Switchon-Off, 10Amp 240V , Toggle Switch / Change Over Switchon-Off-On, 10Amp 240V , Motor Winding Connection Braided Leadcopper Conductor, Glass Braided 4Mm² , Motor Winding Connection Braided Lead Copper Conductor, Glass Braided 6Mm² , Motor Winding Connection Braided Leadcopper Conductor, Glass Braided 10Mm² , Motor Winding Connection Braided Leadcopper Conductor, Glass Braided 50Mm² , Pvc Workshop Flexible Copper Conductor Wire / Cable Size 2Corex23 / 76 , Pvc Workshop Flexible Copper Conductor Wire / Cable Sizes 2Corex40 / 76 , Pvc Twin Twisted Flexible Copper Conductor Wire / Cable2corex23 / 76 , Pvc Twin Twisted Flexible Copper Conductor Wire / Cable2corex40 / 76 , Pvc Wire Single Sheathed Copper Conductor 1Corex3 / 20 , Pvc Wire Single Sheathed Copper Conductor 1Corex7 / 20 , Pvc Wire Single Sheathed Copper Conductor 2Corex3 / 20 , Pvc Wire Single Sheathed Copper Conductor 2Corex7 / 20 , Semi-Conductor Fuse 630Amp, 690V Bushman Make , Semi-Conductor Fuse 700Amp, 690V Bushman Make , Instrument Cable 2 Core, 1Sqmm , Electronic Buzzer 220V Av , Temp. Compensative Cable K-Type ( One Roll ) , Thermo Couple K-Type 12 X 6Mm , Temp. Digital Indicator 96Mm X 96Mm K- Type , Level Indicator With 02 Relay With Low & High Setting , Flow Indicator Cum Totalizer , Announciator , Counter Meter Pnp 220Volts , All Type Digital Am-Meter C / T Operated 4 X 4 , All Type Digital Voltmeter 0 To 600V, 4 X 4 , All Type Digital Frequency Meter, 4 X 4, 50Hz, 240 / 440V , Cradle Terminal / Contact For 800 / 1600Amp L&T Acb , Cradle Terminal / Contact For 3200 / 4000Amp L&T Acb , Jaw Contact For 800 / 1600Amp L&T Acb , Jaw Contact For 3200 / 4000Amp L&T Acb , Changeover Switch 32Amp, 240 Volts , Changeover Switch 63Amp, 440 Volts , Changeover Switch 125Amp, 440 Volts , Changeover Switch 150Amp, 440 Volts , Moving Copper Contact For 250Amp 500V Switch Siemens / L&T , Moving Copper Contact For 400Amp 500V Switch Siemens / L&T , Moving Copper Contact For 630Amp 500V Switch Siemens / L&T , Fix Copper Contact For 250Amp 500V Switch Siemens / L&T , Fix Copper Contact For 400Amp 500V Switch Siemens / L&T , Fix Copper Contact For 630Amp 500V Switch Siemens / L&T , Alumunium Bus Bar Size 6Mm X 50Mm , Alumunium Bus Bar Size 8Mm X 50Mm , Alumunium Bus Bar Size 10Mm X 50Mm , Alumunium Bus Bar Size 12Mm X 50Mm , Leathorised Paper 5 Miles E-Class , Leathorised Paper 7 Milese-Class , Leathorised Paper 10 Milese-Class , 3- Core Shielded Cable 1 Sqm , Hand Hammer Drill Machine With Drill-Bit , Hand Drill Machine , Angle Grinder 4 , Angle Grinder 7 , Electrical Lighting Goods , Glass Lamp Pin Low Voltage, 24Volts, 60 / 100W , Glass Lamp Pin 240V, 60W , Glass Lamp Pin 240V, 100W , Glass Lamp Screw Type240v 60W , Glass Lamp Screw Type240v 100W , Led Bulb09w, 240V , Led Bulb12w, 240V , Led Tubes Light 2 Feet 08Wx240v , Led Tubes Light4 Feet 20Wx240v , Led Street Light 18 / 20W, 240Volts , Led Street Light 30 / 36W, 240Volts , Led Street Light 40 / 50W, 240Volts , Led Street / Flood Light 100 / 120W, 240Volts , Led Flood Light 150W, 240Volts , Led Flood Light 200W, 240Volts , Led Street Light 40W, 240Volts, Yellow Light , Led Street / Flood Light 100W, 240Volts, Yellow Light , Led Flood Light 150W, 240Volts, Yellow Light , Led Flood Light 200W, 240Volts, Yellow Light , Led Hammer Light 25 / 30W, 240Volts.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 6
Uttar Pradesh View Result →
18.
Agriculture #9317836 Technical Bid
Supply Of General Electric Items , Supply Of General Electrical , Cable Travelling Wheel Box Withwheels , Tacho Generator For Dynodrive 40 Hp.Greaves Make , Exhaust Fan 450 Mm. 960 Rpm, 250 V. (Gec Make) , Crc-2-26 Liqud 300 Gm. (Bhant Make) , Ctc 300 Gms. , Multi Meter(P0cket Size) Swanva Make) , Mager 0-500 Motwani Make , Brass Cabon Brush Holder For Cane Unloader. , Tacho Generator For Dynodriv 60 Hp. Greaves Make. , Carbon Bush For Cane Unloader Without Tails Size 100X20x15 Mm. With Central Grooves(As Per Sample) , Carbon Bush For 250 Hp Ke Make Motor With Double Tail Size 38X22x32 Mm. , Carbon Bush For 90 Hp Ke Make Motor With Double Tail Size 40X32x22 Mm. , Pvc Cooling Fan 2 Hp Ke Make Motor , Pvc Cooling Fan 3 Hp Ke Make Motor , Pvc Cooling Fan 5 Hp Ke Make Motor , Pvc Cooling Fan 7.5 Hp Ke Make Motor , Pvc Cooling Fan 10Hp Ke Make Motor , Pvc Cooling Fan 12.5 Hp Ke Make Motor , Pvc Cooling Fan 15Hp Ke Make Motor , Pvc Cooling Fan 20 Hp Ke Make Motor , C.I. Cooling Fan For 15 Hp Ngfe Motor. , C.I. Cooling Fan For 20 Hp Ngfe Motor. , C.I. Cooling Fan For 25 Hp Ngfe Motor. , -Do- But 0-150 A Ctr 150/5 , -Do- But 0-200 A Ctr 200/5 , -Do- But 0-300 A Ctr 300/5 , -Do- But 0-400 A Ctr 400/5 , -Do- But 0-500 A Ctr 500/5 , -Do- But 0-600 A Ctr 600/5 , -Do- But 0-1000 A Ctr 1000/5 , -Do- But 0-1250 A Ctr 1250/5 , Ac Volt Meter Size 100X100 Mm. Range 0-500 V.A.E. Make. , Screw Gauge. , Insulated Combination Plier 8’’(Taparia Make) , Insulated Nose Plier 8’’ Taparia Make , Phase Taster 6” Philips Make , Screw Driver Set (Taparia) 6’’,8’’& 10’’ , Limit Switch Ac At 415 V.Dc At 230 V. Type Llgs Bch Make , -Do- Lli 10 Amp. Bch Make , Solonide Valve Single Acting Sanchhor Below 0-51Type G532/4-3A Coil Voltage 240 V. , Solonide Valve Duble Acting Sanchhor Below 0-50 Type G532/4-3A Coil Voltage 240 V. , Electronic Countinuity Tester. , Lug Crimping Paste Dowels Make. , Backlite Bridge For 400 Amp. Switch , Electronic Controller Gac-40 Greaves Make , Motor Connection Plate For Siemens Make 4 Spead/1710 Kg./Mt. Gd Sq. C.F. Motor. , Eddy Current Coil For 40 Hp Dynodrive , Eddy Current Coil For 60 Hp Dynodrive , Slipring For 90 Hp Ke Motor , Slipring For 250 Hp Ke Motor , Carbon Brush Holder For 90 Hp Ke Motoe , Carbon Brush Holder For 120 Hp Ke Motoe , Copper Carbon Brush(45X32x17) Mm , Copper Carbon Brush(45X32x22) Mm , Electronic Timer Gac-40 For Dynodrive. , Power Capacitor 25 Kvar Siemence Make , Volt Meter 0-500 Volt , Changeover Switch 4 Pole, 63 Amp. Havels/Kenbar Make , Changeover Switch 4 Pole, 630 Amp. Havels /Kenber Make , Changeover Switch 4 Pole, 32 Amp. Havels /Kenbar Make , Heating Element -2 Mtr. Long.U Type 2000 Watt , Solonide Coil For Solonide Valve Serader Below Type G- 50 Coil Voltage-240 , Push Button Station 8 Way With S.S. Enclosercomplete. , Auxillery Contact Block For 3 Ta24/28 Abc. Siemens Make , Foot Switch Tyoe Esgy-1440 Volt Single Pole Double Acting With Element. , Mashroom Type Push Buttom Vaishnu Make , Element For Above 1 No.+1 Nc.Vaishnu Make , Wall Mounting Fuse Switch Unit Cmm. 315 Amp. G.E Make. , Cmm.Fuse Switch Fixed Type 250 Amp. G.E. Make , Cmm.Fuse Switch Fixed Type 630 Amp. G.E. Make , Cmm.Fuse Switch 400 Amp. Drawtype G.E. Make. , Cmm. Fuse Switch 630 Amp. Draw Out Type G.E. Make. , Ictp Main Switch 100 Amp. , Tpn Switch 63 Amp. Bch Make , Fuse Carrier For Cmm Switch 250 Amp. Ge Make. , Hydroulic Thruster Break Thrust 18-25 Kg. , A.C. Viltmeter 0-500V, 144Mm×144Mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Private Organizations No of Bidders 3
Uttar Pradesh View Result →
19.
Power #9303463 Technical Bid
RMC/AMC of hydro mechanical components of Dam, BHEP-I(for 02 yrs)(for 02 yrs)RMC/AMC of hydro mechanical components of Dam, BHEP-I(for 02 yrs)-Manpower for Rountine Maintenance at Dam and power house for 24 months ( for minimum qualification refer SBD) 2 Supervisor 3 Fitter 4 Welder 5 Electrician 6 Helper Skilled 7 Helper 8 Sweeper/cleaner 9 Manpower for Annual maintenance ( for 6 months ) ( for minimum qualification refer SBD ) 10 Supervisor 11 Helper Skilled 12 SPARES - Main Spillway Radial Gate 13 Bottom Seal, Flat Type (20x110x10030) 14 Side Seal, L Type (451x100x12189) 15 Top Seal, Solid double Stem ( 49.5x160x10102 ) 16 Lintel seal, Solid double (49.5x160x10102) 17 Counter sunk Bolt (SS 304)( M16x85 ) 18 Washer 3mm (Neoprene) ( M16) 19 Hex Nut (Bronze) ( M16 ) 20 Hex Screw (SS 304) ( M16x45 ) 21 Washer 3mm (SS 304) M16 22 Counter sunk Bolt (SS 304)( M16x85 ) 23 Bronze Washer (80x51x5mm) 24 Self Lubricating Bushing (Alloy 430) (451x100x12189 ) 25 Seal plate SS 304 of required sizes for top, side and bottom seal 26 MAIN SPILLWAY RADIAL GATE POWER PACKS ( Mechanical ) 27 Pressure line Filter (Make - HYDAC, REXROTH) 28 Return line Filter (Make - HYDAC, REXROTH) 29 Pressure gauge (Make - WIKA, Forbes Marshall) 30 Pressure Switch- (Electromechanical) 31 Motor bearing (Make - SKF) 32 Solenoid valve (Make - HYDAC, REXROTH) 33 Ball Valve(Make - HYDAC, REXROTH) 34 MAIN SPILLWAY RADIAL GATE CONTROL PANEL ( Electrical ) 35 Indicating lamp LED type (RED ( Ac 220V ) (Make- Siemens, Schneider, Teknic) 36 Indicating lamp LED type (GREEN (AC 220V) (Make- Siemens, Schneider, Teknic) 37 Indicating lamp LED type(YELLOW ( Ac 220V ) (Make- Siemens, Schneider, Teknic) 38 Indicating lamp LED type - BLUE ( Ac 220V ) (Make- Siemens, Schneider, Teknic) 39 Indicating lamp LED type - AMBER ( Ac 220V ) (Make- Siemens, Schneider, Teknic) 40 Push Button -RED (Make- Siemens, Schneider, Teknic) 41 Push Button - BLUE (Make- Siemens, Schneider, Teknic) 42 Push Button - GREEN (Make- Siemens, Schneider, Teknic) 43 Key type on/off selector switch (Make- L&T, Schneider) 44 Ammeter selector switch -R-Y-B ( 6 A ) (Make- Salzer L&T, Schneider) 45 Voltmeter selector switch - R-Y-B ( 400 V ) (Make- Salzer L&T, Schneider) 46 On/off selector switch with 1NO (Make- L&T, Schneider) 47 2 way 1 pole with off selector switch (Make- L&T, Schneider) 48 Over load Relay - 40-57 A (Make- L&T, Siemens) 49 1.5 sq.mm wire ( Red/Yellow/blue) -Single core ( Cu ) (Havells, KEI, Polycab make) 50 2.5 sq.mm wire( Red/yellow/blue ) - Single core ( Cu ) (Havells, KEI, Polycab make) 51 Insulated wire end connectors -Pin/U-type/ring type ( for 0.3-6 sq.mm) 52 Terminal blocks for electric panels -2.5 (screw clamp type) 53 Ferrules ( yellow tags ) up to 4.5-6.0 sq.mm - A-Zand 0-9 54 Main pump Contactor (Make- L&T, Schneider, Siemens) 55 Ac/Dc Converter - 220v/24v Dc(Make-MEAN WELL, Recom Power, Schneider) 56 UPS for power supply(APC make Single phase) 57 Space heater 58 MCB -16 A (Havells, Schneider, ABB make) 59 MCB - 32 A (Havells, Schneider, ABB make) 60 MCB - 6A (Havells, Schneider, ABB make) 61 Control Fuse base CNS20H- 20A 62 Door limit Switch (Make- L&T, Schneider, Siemens) 63 Ampere meter - 0/20A(Make- L&T, Schneider, Siemens) 64 Voltmeter - 0-450 VAC(Make- L&T, Schneider, Siemens) 65 Emergency push button -Mushroom type 66 Cu thimbles - 1.5 to 8 sq mm 67 12 V Dc cooling fan for power supply 68 Thermostat for panel 69 AUXILIARY FLOW VERTICAL GATE 70 Bottom Rubber Seal, Flat Type - 20x100x6600 71 Side Seal music note type -125x45x3400 72 Counter sunk Bolt (SS 304) - M16x80 73 Hex Nut (SS 304) - M16 74 AUXILIARY FLOW VERTICAL GATEPOWERPACK (MECHNAICAL) 75 Pressure line Filter (Make - HYDAC, REXROTH) 76 Return line Filter (Make - HYDAC, REXROTH) 77 Solenoid valve (Make - HYDAC, REXROTH) 78 AUXILIARY FLOW VERTICAL GATECONTROL PANEL (ELECTRICAL 79 MCB - 16 A (Havells, Schneider, ABB make) 80 MCB - 32 A (Havells, Schneider, ABB make) 81 MCB - 6A (Havells, Schneider, ABB make) 82 Push Button - RED/Yellow/Blue (Make- Siemens, Schneider, Teknic) 83 Indicating lamp LED type - R-Y-B ( Ac 220V ) (Make- Siemens, Schneider, Teknic) 84 CHUTE SPILLWAY RADIAL GATE 85 Bottom seal,flat type - 20x100x12000 86 Side seal,flat type - 76x121x20406 87 Hex bolts(SS 304) - M16x85 88 Self Lubricating Bushing (Alloy 420) - 60x50x100 89 Bronze Washer (80x51x5mm) 90 CHUTE SPILLWAY RADIAL GATE POWER PACKS ( MECH.) 91 Pressure line Filter (Make - HYDAC, REXROTH) 92 Return line Filter (Make - HYDAC, REXROTH) 93 Pressure gauge (Make - WIKA, Forbes Marshall) 94 Pressure Switch- Electromechanical 95 Solenoid valve (Make - HYDAC, REXROTH) 96 CHUTE SPILLWAY RADIAL GATE CONTROL PANEL (Electrical ) 97 Control Fuse base CNS20H - 20A 98 Push Button Red- 3SB12020AE01 (Make- Siemens, Schneider, Teknic) 99 Push Button Yellow (Make- Siemens, Schneider, Teknic) 100 Push Button Green - SB12012AE01 (Make- Siemens, Schneider, Teknic) 101 Key type on/off selector switch (Make- Salzer L&T, Schneider, Siemens) 102 Ammeter selector switch- R-Y-B ( 6 A )(Make- Salzer L&T, Schneider, Siemens) 103 Voltmeter selector switch -R-Y-B ( 400 V )(Make- Salzer L&T, Schneider, Siemens) 104 Terminal blocks for electric panels - 2.5 (screw clamp type) 105 1.5 sq.mm wire ( Red/Yellow/blue) - Single core ( Cu )(Havells, KEI, Polycab make) 106 2.5 sq.mm wire( Red/yellow/blue ) -Single core ( Cu ) (Havells, KEI, Polycab make) 107 Ac/Dc Converter - 220v/24v Dc (Make-MEAN WELL, Recom Power, Schneider) 108 Ferrules (yellow tags) up to 4.5-6.0 sq.mm - (A-Zand 0-9) 109 Main pump Contactor(Make- L&T, Schneider, Siemens) 110 Insulated wire end connectors - Pin/U-type/ring type ( for 0.3-6 sq.mm) 111 INTAKE VERTICAL GATES POWER PACKS 112 Pressure line Filter (Make - HYDAC, REXROTH) 113 Return line Filter (Make - HYDAC, REXROTH) 114 INTAKE VERTICAL GATES CONTROL PANEL 115 Control Fuse base CNS20H - 20A 116 Push Button Red - 3SB12020AE01 (Make- Siemens, Schneider, Teknic) 117 Push Button Yellow (Make- Siemens, Schneider, Teknic) 118 Push Button Green- SB12012AE01 (Make- Siemens, Schneider, Teknic) 119 Ac/Dc Converter - 220v/24v Dc (Make-MEAN WELL, Recom Power, Schneider) 120 Main pump Contactor (Make- L&T, Schneider, Siemens) 121 Ammeter selector switch - R-Y-B ( 6 A ) (Make- Salzer L&T, Schneider, Siemens) 122 Voltmeter selector switch - R-Y-B ( 400 V ) (Make- Salzer L&T, Schneider, Siemens) 123 Key type on/off selector switch (Make- Salzer L&T, Schneider, Siemens) 124 UPS for Power Backup - (APC make Single phase) 125 Two way Pump Selector Switch (Make- Salzer L&T, Schneider, Siemens) 126 Sealed Lead Acid batteries - 12V-7AH (Make-EXIDE, AMARON, Luminous) 127 2.5 sq.mm wire( Red/yellow/blue ) -Single core ( Cu ) (Havells, KEI, Polycab make) 128 MRG& AUX. GANTRY CRANE 50T (MECHANICAL) 129 Bushes For Roller OD55 x ID40 x 80 130 Bushes For Pulley 131 Bushes For Lifting Beam 132 Bushes For Counter Weight 133 Limit Switch 10 Amp Rotary Type (Make- SOC,EMM) 134 Limit Switch 10 Amp Gravity Type (Make- SOC,EMM) 135 LimitSwitch 2 Way Type (Make- SOC,EMM) 136 Brake Shoe - EHT 250 137 Brake Shoe - EHT 160 138 ( EHT) Thruster for brakes 139 Bearing for LT Wheel - 22218 (Make - SKF) 140 Bearing for Main hoist RopeDrum - 22222 (Make - SKF) 141 Bearing for M.H pulley - 6224 (Make - SKF) 142 Transformer 3 KV (Make - Siemens, L&T) 143 MRG& AUX. GANTRY CRANE 50T ( ELECTRICAL) 144 Push Button Red (Make- Siemens, Schneider, Teknic) 145 Push Button Yellow (Make- Siemens, Schneider, Teknic) 146 Push Button Green (Make- Siemens, Schneider, Teknic) 147 Contactor 110A (Make- L&T, Schneider, Siemens) 148 Contactor 32 A (Make- L&T, Schneider, Siemens) 149 Contactor 9A (Make- L&T, Schneider, Siemens) 150 2.5 sq.mm wire( Red/yellow/blue ) - single core ( Cu ) (Havells, KEI, Polycab make) 151 Terminal blocks for electric panels- 2.5 (screw clamp type) 152 Control Transformer (Make - Siemens, L&T) 153 Lighting Fuse 2A- SF90144 (Make - Siemens, L&T, GEC) 154 Control Fuse 4A - SF90145 (Make - Siemens, L&T, GEC) 155 Control Fuse 6A - SF90146 (Make - Siemens, L&T, GEC) 156 Control Fuse 8A - SF90147 (Make - Siemens, L&T, GEC) 157 Lighting Fuse 16A - SF90150 (Make - Siemens, L&T, GEC) 158 Lighting Fuse 32A - SF90142 (Make - Siemens, L&T, GEC) 159 80A - SF94941 (Make - Siemens, L&T, GEC) 160 Aux. Control Contactor 110V AC (10A)- SS94662 (Make- L&T) 161 Ferrules ( yellow tags ) up to 4.5-6.0 sq.mm - ( A-Z and 0-9 ) 162 Indicators Green/Red/Blue (Make- Teknic) 163 Fuse 32A HF - HRC (Make- L&T, Siemens) 164 LED Flood lights for Gantry -30W (Havells, Philips, Crompton make) 165 CT- 80/5A (Make - Siemens, L&T) 166 Digital Ammeter- 3 phase - 415V (Make- L&T, Schneider, Siemens) 167 CHUTE SPILLWAY GANTRY CRANE 50T ( MECHANICAL ) 168 Brake Shoe- EHT 160 169 Bushes For Roller OD55 x ID40 x 80 170 Bushes For Pulley 171 Limit Switch Rotary Type (Make- SOC, EMM) 172 Limit Switch Gravity Type (Make- SOC, EMM) 173 ( EHT) Thruster for brakes 174 CHUTE SPILLWAY GANTRY CRANE 50T (ELECTRICAL) 175 Lighting Fuse 2A- SF90144 (Make - Siemens, L&T, GEC) 176 Control Fuse 4A - SF90145 (Make - Siemens, L&T, GEC) 177 Control Fuse 6A - SF90146 (Make - Siemens, L&T, GEC) 178 Control Fuse 8A - SF90147 (Make - Siemens, L&T, GEC) 179 Lighting Fuse 16A - SF90150 (Make - Siemens, L&T, GEC) 180 Lighting Fuse 32A - SF90142 (Make - Siemens, L&T, GEC) 181 80A - SF94941 (Make - Siemens, L&T, GEC) 182 Contactor ( LT)- 9A (Make- L&T, Schneider) 183 Contactor 9 ( LT) - 45A (Make- L&T, Schneider) 184 LED Flood lights for Gantry - 20-50W (Havells, Philips, Crompton make) 185 CT- 80/5A (Make - Siemens, L&T) 186 Digital Ammeter - 3 phase 415V-100A (Make- L&T, Schneider) 187 Industrial Socket ( 5 pin ) Female(415V 64A) 188 Industrial Socket ( 5 pin ) Male(415V 64A) 189 Push Button Red (Make- Siemens, Schneider, Teknic) 190 Push Button Yellow (Make- Siemens, Schneider, Teknic) 191 Push Button Green (Make- Siemens, Schneider, Teknic) 192 INTAKE GANTRY CRANE 30 T ( MECHANICAL ) 193 Bushes For Roller OD55 x ID40 x 80 194 Bushes For Pulley 195 Bushes For Lifting Beam 196 Bushes For Counter Weight 197 Limit Switch 10A Rotary Type (Make- SOC, EMM) 198 Limit Switch 10A Gravity Type (Make- SOC, EMM) 199 Brake Shoe - EHT 200 200 Brake Shoe - EHT160 201 Bearing for LT Wheel - 22218 (Make - SKF) 202 INTAKE GANTRY CRANE 30 T ( ELECTRICAL ) 203 Lighting Fuse 2A- SF90144 (Make - Siemens, L&T, GEC) 204 Control Fuse 4A - SF90145 (Make - Siemens, L&T, GEC) 205 Control Fuse 6A - SF90146 (Make - Siemens, L&T, GEC) 206 Control Fuse 8A - SF90147 (Make - Siemens, L&T, GEC) 207 Lighting Fuse 16A - SF90150 (Make - Siemens, L&T, GEC) 208 Lighting Fuse 32A - SF90142 (Make - Siemens, L&T, GEC) 209 80A - SF94941 (Make - Siemens, L&T, GEC) 210 MCB 16A (Havells, Schneider, ABB make) 211 MCB 32A (Havells, Schneider, ABB make) 212 LED Flood lights - 30W (Havells, Philips, Crompton make) 213 Industrial Socket ( 5 pin ) -Female- 415V 64A 214 Industrial Socket ( 5 pin ) - Male - 415V 64A 215 Fan for operator cabin -220V AC 216 Space heater ( cabin ) - 2000W AC 217 Control Panels of 130 HP Dewatering Pumps( Dam Gallery) 218 Tape insulated ring type current transformer - 5VA class-1Accu 219 Main/ Delta contactor- 240V Coil Voltage 220 Star contactor - 240V Coil Voltage 221 Thermal overload relay (Make - Schneider, L&T, Siemens) 222 Electronic Star-Delta Timer - 230V 223 Single phase preventer 224 Winding protection relay (Make - Schneider, L&T, Siemens) 225 Moisture controller 226 Electronics Earth leakage relay with CBCT (Make - Schneider, L&T, Siemens) 227 Control transformer with protective fuses (Make- Siemens) 228 Control relay for SPP & O/L Relay (Make - Schneider, L&T, Siemens) 229 Breaker - 315A (Make- Havells, Schneider) 230 Breaker - 250A (Make- Havells, Schneider) 231 Copper thimbles for 185 sq.mm cable 232 CI Gate valve - 150mm (Kirloskar, Divine make) 233 CI In swinger Check Valve - 150mm (Kirloskar, Divine make) 234 PVC heavy duty Water suction Hose pipe 6 inch, 3 meter length 235 ARMAC PANELS AND LT Distribution Boards of DAM CONTROL ROOM 236 Red indicating Lamp-Dia,22.5,24vDC (Make- Siemens, Schneider, Teknic) 237 Green indicating Lamp-Dia,22.5,24vDC (Make- Siemens, Schneider, Teknic) 238 Amber indicating Lamp - Dia,22.5,24vDC (Make- Siemens, Schneider, Teknic) 239 Key type On/Off selector- XB5-AD21N (Make - Schneider, L&T, Siemens) 240 4 Sq.mm 2 core cu cable (Havells, KEI, Polycab make) 241 Profibus Cable ( violet ) for Armac loop- 22AWG x 2C cable 242 Profibus Connector- with diagnostic LED 243 Sealed Lead Acid batteries-12V 7AH (Make-EXIDE) 244 Backup UPS for ARMAC operator station- 600W-230V (Make- APC) 245 4 core 50sq,mm cable For Hooter- Armoured (Polycab, Havells, KEI make) 246 4 core 16 sq.mm cable for drinking water pump -Armoured (Polycab, Havells, KEI make) 247 DOL starter For Hooter -415V 3phase (Make- Siemens,L&T, Schneider) 248 DC adapter for CCTV Cameras-220V 249 Gate position Indicator 2000 Series P.S 90-270V AC/DC 250 Merlin Gerin NS 250 H MCCB 250 Amp with rotary handle (Make- Schneider) 251 Masterpact NT16 H2 Circuit Breaker (Make - Schneider) 252 TRASH RACK CLEANING MACHINE 253 Solenoid valve (Make - HYDAC, REXROTH) 254 Terminal blocks- 2.5-6 sq.mm capacity (32A) 255 5 core Cable 70 sq.mm for TRCM - unarmoured (Polycab, Havells, KEI make) 256 48 V AC/DC Converter- 3phase -415V (Make-MEAN WELL, Recom Power, Schneider) 257 Consumables 258 Cotton cloth 259 Cotton Dhoti 260 Grease (Multi-Purpose) 261 Grease Bearing 262 Hydraulic oil (Indian oil, HP, Bharat petroleum make) 263 Engine oil (Multi grade) 264 Emery Cloth 265 Emery paper coarse 266 Detergent for cleaning 267 Handwash liquid (225ml) (Dettol, Savlon, Lifeboy make) 268 CTC cleaner 269 CRC-CO contact cleaner (400ml) Loctite make 270 M seal 271 Diesel 272 Loctite 406 (20 gm) 273 Rustolene 274 Welding rods 3.15mm 275 Welding rods 4.00mm 276 Welding Rods for cast iron 277 Cold Welding Paste 278 Welding glass black 279 welding glass white 280 welding screen 281 Cadmimum compound 282 Silica Gel 283 Synthetic enamel paint(Asian Paint, Nerolac, Berger paints make) 284 Red Oxide Primer (Asian Paint, Nerolac, Berger paints make) 285 Paint brush (3 and 4) 286 Pencil Brush 287 Cotton Hand Gloves 288 Fevi quick 2 gm 289 Hexa blade 1”x12” 290 Isopropyl alcohol 291 PVC tape/insulation tape (Havells, Anchor, Goldmedal make) 292 Collin spray (500ml) 293 Rubber sheets (3mm & 4mm) as per sample to with stand requisite pressure 294 Champion sheets (various sizes 3mm, 4mm & 5mm) as per sample to with stand requisite pressure 295 Adduct Cycloaliphatic, Anticorrosion,Immersion Grade Epoxy lining coating paint 296 Thinner ICI 297 Nuts & Bolts with washers of various sizes Stainless steel M10, M12, M14,M16, M18, M20 298 Distilled water for Battery banks 299 Floor Mops 300 Floor Brooms (Scotch brite, Gala, Spotzero make) 301 Floor Wipers (Scotch brite, Gala, Spotzero make) 302 Srubbers 303 Phenyl 304 Dust Bins,60 litres capacity 305 Detergent powder,60 grams pouch (Surf, Tide make) 306 Buckets,25 litres capacity 307 Nepthalene balls 308 Plastic trays,5 litres capacity 309 Flush cleaners, 1 litres each 310 Socket 16A (Havells, Anchor, Goldmedal make) 311 Top 16A (Havells, Anchor, Goldmedal make) 312 Switch 16A (Havells, Anchor, Goldmedal make) 313 Socket 6A (Havells, Anchor, Goldmedal make) 314 Top 6A (Havells, Anchor, Goldmedal make) 315 Switch 6A (Havells, Anchor, Goldmedal make) 316 A4 Size Paper rim 317 LED Flood light 30W IP68 rated ( Philips, Crompton, Havells make) 318 Tools and tackle 319 Combination/cuttingplier (Stanley, Taparia, Tata Agrico make) 320 Wire cutter (Stanley, Taparia, Tata Agrico make) 321 D-spanner ring 6mm to 46mm (Stanley, Taparia, Tata Agrico make) 322 Crimping tool set from 2.5sqmm to 100 sq.mm (Stanley, Taparia, Tata Agrico make) 323 Torque wrench set of suitable rating (Stanley, Taparia, Tata Agrico make) 324 Heavy duty hammeringanddrillingmachineof2 sizes (Bosch, Dewalt, Stanley make) 325 Vacuum cleaner industrial type (Bosch, Dewalt, Stanley make) 326 Air blower industrial type (Bosch, Dewalt, Stanley make) 327 Working table with 4 sitting chairs set 328 Hand grease gun 329 Bucket Grease Gun 330 Pocket multimeters (Fluke, Bosch make) 331 Torch lights (Big) (Havells, Philips, Crompton make) 332 Soldering iron big and small (Bosch, Dewalt, Stanley make 333 Fuse puller 334 DC tester to check battery voltage (Fluke, Bosch make) 335 Hydrometer for battery testing 336 Tong tester for checking current in cables (Fluke, Bosch make) 337 LT Meggar 1 KV 338 LT Meggar 5 KV 339 Earth resistance tester (Fluke, Bosch make) 340 Office Desktop (Intel i5 processor, 500 GB HDD, 8 GB RAM, 21 inch display, Windows and Microsoft office pre-installed) (HP, Dell, Lenovo make) 341 Hp 5820 printer ink- Black& red ,yellow ,Blue (5+2each) 342 Mobile phones with sim cards 343 Tachometer (Fluke, Bosch make) 344 Vibration meter (Fluke, Bosch, Metravi make) 345 Chain block pulley of 5 ton (Fulcrum, Voltz, Boltz make) 346 Chain pulley blocks of 3 ton (Fulcrum, Voltz, Boltz make) 347 Welding machine single phase incl. allied accessories (Esab, Boss, iBell make) 348 Welding machine 3 phase (Esab, Boss, iBell make) 349 Screwdriver set (Stanley, Taparia, Pye make) 350 Allen Keys 2-16 (SS) (Stanley, Taparia, Pye make) 351 Line tester (Stanley, Taparia, Pye make) 352 Rain wear Jacket of Reputed make( l,xl,xxlsize) (Wildcraft, Adidas, Nike make) 353 LeatherHigh ankle Steel toe Safety shoes Black color (Woodland, Allen cooper, Liberty make) (of various sizes 6,7,8,9,10 mix as per site requirement) 354 Dongri ( m,l,xl,xxl) of Reputed make 355 Safety helmet with attached/inbuilt torch (Black Decker, heapro, Braid agro make) 356 Welding goggle 357 Grinding / safety goggle (Reputed make) 358 Measurement tapes 5 mts 359 Ring-spanner ring 6mm to 46mm (Stanley, Taparia, Pye make) 360 Eletrical tool kit (screw drivers set,combination pliers,side cutter,nose plier,wire stripper,soldering iron set,Tester etc. complete) (Bosch, Stanley, Dewalt make) 361 Ratchet with socket square drive hex socket 27 pcs set (Stanley, Taparia, Pye make) 362 Monkey Plier 10 inch (Stanley, Taparia, Pye make) 363 Polyolefin wire insulation sleeve heat shrinkable (2 - 300 mm) 625 pcs set 364 Nose plier (Stanley, Taparia, Pye make) 365 Vernier Caliper Digital (0-150mm) (Mitutoyo , Markvel make) 366 Inside Micrometer (50-300mm)(Mitutoyo , Markvel make) 367 Outside Micrometer (0-25mm)(Mitutoyo , Markvel make) 368 Accommodation for contractor stafffor 24 months 369 Vehicle and maintenance charges for 24 months
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Jammu And Kashmir View Result →
20.
Agriculture #9301926 Technical Bid
Ex-Godown Site Including Freight Rate, Supply Of General Electricals, Fittings Accessories From Reputed Suppliers / Manufacturers , Supply Of Electric / Lighting Goods. , Insulating Varnish Elmolufta-1, Dr. Back Make , Insulatingbectrol Red, Dr. Back Make , Insulating Thinner 205 Dr. Back Make , P.V.C. Tape Steel Grip 3 / 4, -Bhor , Cotton Tape 3 / 4 , Empire Tape 3 / 4 , Glass Tape 3 / 4 , H.T. Black Tape 3 / 4-J&J Make , No Vexpaper 7Mill & 10Mill -Crimple Make , Leathered Paper 7Mill & 10Mill, Crimple Make , C.T.C. , Crc2-26 , S.T. Holder 300 / 500 Watt -National Make , S.T. Holder 100 Watt, -National Make , Condensor 2.5 Mfd. Usha / Asian Make , Condensor 4 Mfd.-Usha / Asian , Condenser 33 Mfd. Usha / Asian Make , Power Capacitor -Usha / Asian Make , Bare Copper Wire 6Swg & 8 Swg , Bakalitekit Kat 63 Amp.-Ee Make , Backalitekitkat 100 Amp. -Ee Make , Potensio Meter 500V 3Rk-Pankaj Make , Phase Tester Pocket Type Set-Pankaj Make , Insulated Plier 8-Taparia Make , Insulated Screw Driver-Taparia Make , Insulated Screw Driver 12 -Taparia Make , Hrc Fuse 4Amp.-Ee Make , Hrc Fuse6amp.-Ee , Hrc Fuse 10Amp.-Ee Make , Hrc Fuse 16 Amp.-Ee Make , Hrc Fuse 63 Amp.-Ee Make , Pedestal Type Amper Meter 4 Dial 0-30-Ae Make , Pedestal Type Amper Meter 4 Dial 0-60A -Ae Make , Padistal Type Amper Meter 4 Dial 0-100Am E-Ae Make , Padistal Type Amper Meter 4 Dial 0-100 Ctr100 / 5 -Ae Make , Padistal Type Amper Meter 4 Dial 0-200 Ctr200 / 5-Ae Make , Padistal Type Amper Meter 4 Dial 0-300Ctr300 / 5-Ae Make , Padistal Type Amper Meter 4 Dial 0-400 Ctr400 / 5-Ae Make , Padistal Type Amper Meter 4 Dial 0-500 Ctr500 / 5-Ae Make , Padistal Type Amper Meter 4: Dial 0-600 Ctr600 / 5 -Ae Make , Squire Type Amper Meter 4 Dial 2505 Fuse Type-Ae Make , Squire Type Amper Meter 4 Dial 400 / 5 Flush Type-Ae Make , Squire Type Amper Meter 4 Dial 600 / 5 Flush Type-Ae Make , Squire Type Amper Meter 4Dial 800 / 5 Flush Type-Ae Make , Squire Type Amper Meter 4 Dial 1000 / 5 Flush Type -Ae Make , Squire Type Amper Meter 4 Dial 3000 / 5 Flush Type -Ae Make , C. T. 100 / 5 To 400 / 5 Flush Type , Plastic Cooling Fan Any Motor 5 Hp , Plastic Cooling Fan Any Motor 7.5Hp , Plastic Cooling Fan Any Motor10hp , Plastic Cooling Fan Any Motor 15 Hp , Plastic Cooling Fan Any Motor 20 Hp , Plastic Cooling Fan Any Motor 30 Hp , Plastic Cooling Fan Any Motor 40 Hp , Plastic Cooling Fan Any Motor60 Hp , Aluminium Cooling Fan Any Motor 15 Hp , Aluminium Cooling Fan Any Motor 40 Hp , Aluminium Cooling Fan Any Motor 60Hp , Pvc Copper Wire -National , Pvc Flexible Copper Wire 7 / 16X1core -National , Pvc Flexible Copper Wire 7 / 16X2core-National , Pvc Flexible Copper Wire 19 / 16X1core-National , Metalic Carbon Bush With Tail 22X32x40mm-Aling , Brass Holder For Above-Aling Make , Slipring For 250 H.P. Motor.Id-72Mm, Od-196Mm, L-140Mm , Slipring For 150 Kw Injection Motor Id-68Mm, Od-185, L-130Mm , Non Metallic Carbon Bush For Cane Unloader 20X20x100mm -Aling , Brass Holder For Above-Aling Make , Metallic Carbon Bush With Tail 10X25x40 For 80 Hp Motor , Carbon Holder For Above As Per Sample-Aling , Slip Ring For 80 Hp Motor Crompton Size Id-60Mmod-120Mm Length 75Mm , Metallic Carbon Bush 20X32x40mm For 150 Hp Motor-Aling Make , Brass Holder For Above-Aling Make , Slip Ring For 150 Hp Kec Motorid-68Mm, Od-180Mm, L-132 , Metalic Carbon Bush With Tail 16X32x40-Aling Make , Brass Holder For Above , Slip Ring For 75 Hp Kec Motor Id-45Mm Od-125Mm L-115Mm , Non Metallic Carbon Bush With Tail For 400 Hp D.C. Motor Size 20X32x36mm -Aling Make , Holder For Above , Fix Arching Contact 400 Amp. Ocb -Mei , V- Bar For 400 A Ocb-Mei , Moving Contact L Type 400 Amp.-Mei , Arching Contact 400 A-Mei , Fix Plate 630 Amp. , Glass Fuse 10 Amp. , Scr Dcr Thruster 1515 Sg , Rotary Switch 25 Amp. -Thakur , Diode 16 Mfr , Diode 40 Mr100 , Diode Ps 040 Cur F10 , Diode 5408 , Diode 321 Um100 , Diode 321 Umr100 , Mush Room Type Push Baton 10 Amp. -Vaishno Make , Contact Element For Aobve10 Amp.-Vaishno Make , Shekel Insulator 3 , Weasel Conductor , Thruster Brack 21 Kgs. Pressure For Cane Unloader , Digital Millimeter Dp-800 Pocket Size -Sanwa Make , Fuse Base 125 Amp-Vaishno Make. , Change Over Switch 400 Amp .-Havells / Kenber Make , Change Over Switch 630 Amp.-Havells / Kenber Make , Miltimeter -Sanwa Make , Dz Fuse 32A B / L , Dz Fuse 35A-B / L , Dz Fuse 63A-B / L , Meager 1000 V Digital -Motwani , Hydraulic Crimping Lug Machine Hand Type , Arc Chute 3Ta-28 -Siemens , Semiconductor Fuse 50 Amp.Gsa-Siemens , Tube Light Side Holder 40 Watt-Anchor , Spare Moving Contact For 3Ta-28 Contactor -Siemens , Spare Moving Contact For 3Ta-24 Contactor-Siemens , Gauge Ring For Dz Fuse 25 Amp-B / L , Gauge Ring For Dz Fuse 35 Amp.B / L , Volt Meter 0-500-A / E , Kilowatt Meter 135X135 2000 Watt-A / E , Kvar Meter 135X1352400-A / E , Pvc Coated Copper Flex. Wire 16 Corex1.5Mm , Resistance 27E40 , Dz Fuse Base 3 Phase Bl Make 25Amp.-B / L , Dz Fuse Base3 Phase Bl Make 63Amp-B / L , Continuity Tester Taparia , Bakalite Rod 2X2 Ft , Arching Chamber 3Ta28-Siemens , Holder Backlite For 3Ta28 Contactor -Siemens , Holder Bakalite For 3Ta-24-Siemens , Bakelite Plate For Terminal Sk70430 , Bakelite Plate 250Amp.Switch Sk70349 , Electronic Speed Controller , Speed Regulator Sardine For Dyno Drive , S.C. Lamp Holder For Sv Lamp.250 Watt / 400Watt , Auxiliary Contact 4 No+2Nc For 3Ta-28 Contactor-Siemens , Digital Power Factor Meter 3 Phase 3000 / 5 5.1 / 2X5.1 / 2 , Auxiliary Contact 4 No+4Nc For 3Ta-61 Contactor-Siemens , Pvc Cooling Fan Kec Vertical Motor 52X83mm , Power Cradle Terminal Assly For 4000 Amp.Acb-L&T , Jaw Contact For 4000 Amp. Acb-L&T , Tong Tester Micro Make Ac / Dc 1000 , Push Button Station 8Way Pendent Cob-64 For Crane , Tpn Switch 63 Amp-Kenber / Havells , Thinner 234 -Dr.Back , Copper / Aluminum Lug As Per Price List -Dowells , Complete Fitting And Accessories -Bajaj / Crompton , Tube Light / Hpsv / Mv Lamp / Bulb-Bajaj / Crompton , S.T. Bulb 500 Watt -Mysore , S.T.Bulb 300 Watt-Mysore , Ictp Main Switch 100 Amp-Kenber , Ictp Main Switch 63 Amp-Kenber , Ictp Main Switch 32 Amp-Kenber , Energy Meter , Ff Switch 32 Amp-L&T , Ff Switch 63 Amp-L&T
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 3
Uttar Pradesh View Result →
21.
Agriculture #9292611 Technical Bid
Competitive Ebidding For Supply Of General Electrical Items Season 2023-24 , Empire Tape ¾” Size. , -Do- But 1” Size. , Pvc Insulating Tape Steel Grip Bhore Makes ¾” Size. , Glass Varnish Tape ¾” ( 50Mm ) Size. , -Do- But 1” Size. , Phase Tester “Taparia” Make. , Heater Element Best Quality Isi Marked 1000 Watt. , -Do- But 1500 Watt. , -Do- But 2000 Watt. , Cotton Tape 1” Size.50 Mtr.Roll , Ctc- 300 Grams. Bottle Bharat Bijli Make. , -Do- 400. –Do- , Thinner 218 For Above Varnish. , Dr. Beck Make Varnish Elmoluft 1-A. , Megger 0-500 Motwani Make. , Pvc Batten ½” Size. , -Do- But ¾” Size. , -Do- But 1” Size. , -Do- But 1-1 / 4” Size. , Pvc Gittiesof Above Sizes / Any Sizes , P.T. Holder 60 Watt. Anchor / Ssk / Lica Makes. , -Do- But 100 Watt. , S.C. Holder 100 Watt. Jyoti Make. , -Do- But 300 / 500 Watt. Jyoti Make. , Flush Type Switches 5 Amp. Lica / Anchor Make , -Do- But 15 Amp.“ “ , 3 Pin Combined Switch Socket Of 5Amp. Lica / Anchor Make. , -Do- But 15 Amp. , 3 Pin Plug Top 5Amp. Lica / Anchor Make. , -Do- But 15 Amp. , Button Holder. , Angle Holder Lica / Anchor Make , Ceiling Rose. , Novex Paper 7 And 10 Mil.Minimax Make , -Do- But 5 Mil. , Crc-2-26 In 400Gm. Packing Imported. , -Do- But Bharat Bijli Make. , Copper Bus Bar. , Kit Kat Completes 32 Amp. 240Volt. , Aluminium / Copper Lugs “Dowells” Make. ( Please Quote Maximum Discount On Co.Price List. , Taparia Make Screw Driver ¼”X6” Size. , -Do- But 5 / 16”X8” Size. , -Do- But 3 / 8” X 10” Size. , Pedestal Type Amp. Mtr. In 4” Dia 0-10 Amp. , -Do- But 0-20 Amp. , -Do- But 0-30 Amp. , -Do- But 0-40 Amp. , -Do- But 0-50 Amp. , -Do- But 0-60 Amp. , Vidyut Make Pvc Insulated Unsheathed Wire Copper Conductor Wires Any Sizes / Cores On Principal Manufacturer Prevailing Price List. ( Discount ) . , Htp / Atlas Make Different Swg Enamelled Winding Wires Made Of Copper Conforming To Is13730 On Co.Prevailing Price List Discount. , Bakalite Sheet Isi Standard ¼” Size. , -Do- But ½” Size. , -Do- But ¾” Size. , Leathorised Paper 5 Miles. , -Do- But 7 Miles. , -Do- But 10 Miles. , Capacitor 300Kva Oil Filled Javik Make One Capacitor 25Kvar. , Dowels Paste Tube. , Insulating Pliers Tap Aria Make 8” , Screw Driver 10”X 3 / 8” , -Do- But 12”X ½” , Carbon Brush Holder 170Hp , Copper Carbon Brush / Bush 22X32x40 For 250Hp , -Do- But For 400 Hp , Carbon Brush 22X32x40 For 150Hp , Pure Carbon Bush 40X40x20 , Proximity Switches Pnp 24Vd , M.T.C. Coils 220Volt. , Micro Switch , Semi Conductors Fuse 500Amp.660Volt. , M.C.B. 32 Amp. Havel’S / Standard Make.As Per List Less , Pvc Wire Aluminum Weather Proof 2 Core X 4M Sq. Plaza Make. List Less , Dcr Thruster 604Se 1616. , Carbon Brush Holder For 1.5Mw Jyoti Alternator. , Aluminum Socket 35Sq.Mm , Multi Standard Annealed Tinned Copper Conductor ( Seven Std. ) Pvc ( Type E-Self Ext. Type ) Insulated Cores, Two / Three Over All Screened With Allayer Tape Along With A Drain With Of 7 / 0.3Mm Of Atc Inner Pvc ( Type Stj ) Shielded, G.I. Wire Armored And Overall Pvc Type Stj-Fr ) Sheathed Cable:- , A. Copper Shielded Armored Cable 6 Core X 1.00Mm Sq. , B. –Do- But 4 Core X 1.00Mm Sq. , C. –Do- But 2 Core X 1.00Mm Sq. , Push Button Station 1 No + 1 Nc Vaishno Make , Carbon Brushes 50X40x20mm Size. , Hrc Fuse Link Type 63Amp. Ee Make. , Carbon Brush Holder For 250H.P. Motor.Frame No Tr-6 , Cooling Fan For Centrifugal Machine 6”, 2900Rpm, 230V , Pure Carbon For Cane Unloaded 100X20x20mm Size. , M-15E Carbon Brushes 20X40x40mm Size. , Fuse Carrier Bakelite 63Amp. Vaishnav Make. , Limit Switch Essen Make 1 No + 1 Nc , Limit Switch Element Eussion Make 1 No + 1 Nc , Motor Connection Lead Eussion 40 Hp 16Mm²glass Braided , Carbon Brush For Hand Grinder Dewalt Makes. , Slip Ring 12.5Hp Crompton Makes. , Carbon Brush Holder 12.5Hp , Mushroom Type Push Button With Element. , Carbon Brush Holder For 100Hp Electric Motor. , Grandly Make Pvc Flat Unarmored Copper Cable 3 Core X 50Sq. Mm For Unloader. , Electronic Control Card For 50Hp Dynodrive Eddy Control Make. , Timer ( Single Mode ) 5 Second- 60 / 120 Second Bch Makepc. , M.C.B. 25 Amps. 4 Pole 440Volt Havel’S Make.As Per List Less , Cradle Terminal For 4000Amp. Acb.& Jaw , Fix Bakelite For Above. , Slip Ring Assembly For 60Hp / 250Hp Motor. , Slip Ring Holder. Small Size 10Hp Motor , Brassholder For 250Hp Motor. , Techno Generator Dtg-4000 70 Ma / 200V, 4000 Rpm Frame No Tr-6 , Semi Conductor Fuses 700Amp. 690 V 3 Str / 110 Bushman Denmark Make. , Copper Carbon Bushes 45X15x15mm Size. , Changeover Switches 32Amp. 240Volt Ben Tax Make. , Semi Conductor Fuses500 Amp.690V Buss Man , Copper Carbons Brush 30X16x40mm Size. , Pvc Copper Cable 1.5Sq. Mm X 4 Core. , Jaw Contacts 3200 Amp. For Acb L&T Make. , -Do- But 4000Amp. , -Do- But 1000Amp. , Techno Generator Required For 100Hp Dynodrive Bore 75Mm Outside Dia 200Mm Crompton Greaves / Eddy Control Make. , Moving Contact Fbc-250Amp.L&T Make , -Do- But Fbc-400Amp.L&T Make , Synchronous Timer Em-1000, 2 Relay, 240Volt 2No + 2 Nc, 0-120 Second. , Carbon Brush Holder For 400Hp Slip Ring , Techogenerator 100V 1000Rpm Tdp-02-Lt-3 Hubner Make. , Carbon Brush Good Quality 22X32x45mm Size. , -Do- But 20X38x42mm Size. , Carbon Brush Holder For 150Hp , Fuse Carrier Bakelite 63 / 32Amp. , Varnish Insulating Tape 1” Size. , Bectol Red Varnishes Dr. Beck. , Bectol Gray Varnish Dr. Beck , All Type Ampere Meter Volt Meter Hour K.W.H. Meter “Automatic Electric Bombay. List Less , All Switch Dp & Tp Switch Standard Makep On Ppl List Less , Spare Of Switch Fa / Fac / Fbc L&T Make Ppl List Less. , Moving Copper Contact For 250 A 500 V Siemans Make , -Do- 400 A 500V Siemens Make , -Do- 630A 500V Siemans Make , Fix Copper Contact 250 A 500 Vsiemens Make , -Do- 400A 500V Siemens Make , -Do- 630 A 500 V Siemens Make , Black Tape 3 / 4 Johanson Make , -Do- But 1 , Multimeter Fluke / Me Co , Pvc Scathed Aluminium Coonducto To Wire All Size As Per Price List , -Do- Copper Conductor- As Per Price List , Pvc Motor Coding Fan 3Hp, 5Hp, 10Hp, 25 Hp, 40Hp
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 5
Uttar Pradesh View Result →
22.
Water Resources and Irrigation #9194875 Technical Bid
Procurement Of Consumables For Mechanical, Electrical And Test Section Of Khara Power House During F.Y. 2022-23- 1 Spare Kit For Air Break Contactor 3 Tf-47-7, 70Amp Semience Make 2 Direct Online Motor Starter, Made In India ( L&T ) Male Typ-Mk-1, Coil Voltage-360V, Current Range-15 Amp, 3 Phase, 50Hz 3 Side & Top Rubber Seal Hollow For Intake Gate Is 4622, Dia 45 Mm, Width 115Mm 4 Spare Kit With Coil For Ml-3 Contactor, 40 Amp 5 Spare Kit With Coil For Ml-4 Contactor, 70 Amp 220 V 6 Cm 100 Contractor Coil 220V, Ac, 50Hz Make Crompton Greaves Or Equivalent 7 V.Belt B-97 8 Skf Bearing 7318 9 Opu Pump Nr V 10 Opu Pump Safty Valve 11 Led Indication Bulb Assembly 220V Ac, ( Red Colour ) 12 Led Indication Bulb Assembly 220V Ac, ( Blue Colour ) 13 Led Indication Bulb Assembly 220V Ac, ( Yellow Colour ) 14 Led Indication Bulb Assembly 220V Ac, ( Green Colour ) 15 Led Bulb 7 Watt, Syska Or Equivalent 16 Led Bulb 9 Watt, Syska Or Equivalent 17 Drainage Pump Motor Couping ( As Per Sample ) 18 Crompton Greaves Make 3 Phase Induction Motor 5 Hp With Mono Block Pump Alonwith 15 Mtr. Flexible Pvc Pipe And 1 No. Foot Valve, Complete In All Respect ( Spare For Dph Tube Well Drinking Water Supply, Dph, Kph Or Cisf ) 19 Copper Sensor For Filtartion Plant And Drainage Pit ( As Per Sample ) 20 Copper Sensor For Intake Level Indicator ( As Per Sample ) 21 Breake Pad ( Size 24 Cm X 16 Cm X 8 Cm ) ( As Per Sample ) 22 Cam Limit Switch ( As Per Sample ) 23 Cam ( As Per Sample ) 24 Cam Shaft ( As Per Sample ) 25 Nrv Drainage Pump ( As Per Sample ) 26 Unbrako Make Ht Nut / Bolt M-16 X 55 27 34 Kg Thruster ( Type 335, Cm5, V-415, C / S 50, Phace-3, ( As Per Sample ) 28 Pressure Guage 0-70 Kg / Cm2, ( Osmodial Or Equivalent Make, Borden Type 29 V.Belt A.28 30 Taflon Tape 31 Piyano Type Switch 6 Amp 32 Piyano Type Socket 6 Amp 33 M-Seal 34 Haxsaw Balde 1 35 Wire Brush 36 Copper Lug 2.5 Mm ( Punching Type ) 37 Emry Paper Fine 38 Air Break Contactor 3Tf. 47-7, 70 Amp 2 No+2Nc, 110V Ac 39 Cotton Waste 40 Pressure Guage 0-70 Kg, Bourdon Type Osmodial Make Or Equivalent Standard Make 41 M.S Electrode 3.15 X 350 Mm 42 Markeen Cloth 43 Old Dhoti 44 Fuse Base & Top Kit-Kat 63 Amp 45 Fuse Base & Top Kit-Kat 32 Amp 46 Piyano Type Switch 16 Amp 47 Piyano Type Socket 16 Amp 48 Over Load Relay 20-32 Amp Max - 63 Amp L&T Make 49 Ml-4 Contractor, 70 Amp ( L&T Make ) 50 Pressure Gauge 0-10.6 Kg / Cm², 4 Dail, Guru Make ( 0-150 Psi ) , As Per Sample 51 Pressure Gauge 0-10.6 Kg / Cm², ( Osmodial, Borden Type, Thread Type- Bsp Dia Thread 20 Mm ( Shaft Seal ) 52 Hacksaw Balde 1 / 2 53 Pvc Insulated Sheethed Copper Cable 14 Sq. Mm 40 / 76 ( Hand Lamp ) 54 Ss Coupling Bolt With Lock Nut, Spring Washer, Rubber Bush ( Darinage Pump ) 55 Ss Coupling Bolt With Lock Nut, Spring Washer, Rubber Bush ( Opu Pump ) 56 Air Break Contactor 3Tc.22 11 Od, 1 No+2Nc, Coil Voltage 220V Dc, 9000? ( Siemense Make ) ( For Intake Gate ) . 57 Lcie-09 Contactor ( 220V Dc, L&T Make Mmoo ) 58 Olver Load Relay 45-70 Amp Max-160 Amp L&T Make 59 Timer Et-100 240 / 110 V Ac 60 Timer Et-100415 / 240 V Ac 61 Tsd Of Turbine Guuide Bearing ( As Per Sample ) 62 Welding Lead 12 Mm Double Insulated 63 Double V Groove Pully ( Fresh Air Fan ) ( As Per Sample ) 64 Peercent Speed Meter, Ae Make ( Fsi Ma / 100V S.No. 9 / 82 / 14908 / 22 ) 65 Countersunk Screw With Nut ( Material Ss ) Standard Make Size 16 Mm Thick, 100 Mm Length 66 High Pressure Regulator Valve 42 Kg / Sq.Cm. ( Model No. ) Hpqr-25, 1 67 Labline Make Globe Valve Size 4 ( As Per Sample ) 68 Labline Make Globe Valve Size 6 ( As Per Sample ) 69 Dc Coil V 220 / 230 Volt, 5000 Ohm, ( Model No. 3Ty1 223-3 M 3Tc 22 ) For Intake Gate Starter Panel 70 Bulb Holder 71 Pvc Tape Red 72 Pvc Tape Blue 73 Pvc Tape Yellow 74 Pvc Tape Black 75 Emery Paper ( Per Meter ) 76 Gt Lv Side Bushing Seal As Per Sample 77 Uat Buchholz Relay ( As Per Sample ) 78 Rubber Bellow Of G.T. 79 Gate Valvebrass 50Mm Both Side Flange 80 Silica Gel 81 Bch Make Precision Limit Switch 4No +4Nc Type, Cat No.-Psrl-2 Awg14 For Start / Stop Command To Motor 82 Bch Make Contactor Block 2 No. Front Mounted 83 220 Kv Isolator Female Jaw 84 Earth Flat 50X6mm G.I. 85 Cork Sheet ( 4Ft X 4 Ft X 6Mm ) 86 Cork Sheet ( 4Ft X 4 Ft X 3Mm ) 87 Silica Gel Breather 15 Kg Capacity 88 11Kv Cable Box Kit 185Mm 89 Champion Sheet Size 4 Ft X 6 Ft X 1 Mm Thick 90 Champion Sheet Size 4 Ft X 6 Ft X 3 Mm Thick 91 Epoxy Rasin Cast Bushing Strip Square ( As Per Sample ) 92 Seal Of Bushing Strip ( As Per Sample ) 93 Neoprene Sheet 4 Ft X 4 Ft X 5 Mm Thick 94 Neoprene Seal Size 1070 Mm X 350 Mm X 5 Mm Thick Top ( As Per Sample ) 95 Neoprene Seal Size 1070 Mm X 350 Mm X 5 Mm Thick Bottom ( As Per Sample ) 96 Neoprene Seal Size 660 X 590 X 5 Mm Thick ( As Per Sample ) 97 Neoprene Round Seal Size 2400 X 2350 X 6 Mm Thick ( As Per Sample ) 98 Woolen Felt Seal Size 4 X 8 X 12Mm Thick 99 Shunt Trip Coil 220 V Dc ( For 415 V, 3 Phase English Electric Make Acb ) 100 Ods Rotary Switch 4-Pole 20 Amp. 660V Ac / Dc ( Rotary Type ) W / O Spring On / Off 101 Concord Type 240 Volt Relay, Coil Voltage 240V Dc ( As Per Sample ) 102 Led Indication Lamp With Holder In Red, Green And Yellow Colour For 220 Volt Ac / Dc ( 24-Red, 30-Green & 40-Yellow ) 103 Hose Pipe 20 Mm Dia. For 1000 Lphcentrifusing Machine ( As Per Sample ) 104 Silica Gel 105 Cotton Waste 106 Old Dhoti 107 Markeen Cloth 108 Non Adhesive Tape ( 4 Nos. Each Of Red, Yellow, Blue Colour ) 109 Teflon Tape 110 Pvc Tape 111 Ht Cotton Tape ( 2 Mtr. Roll ) 112 Ms Nut And Bolt 32 Mm X 12 Mm With Spring Warshers ( As Per Sample ) 113 Ms Nut And Bolt58 Mm X 10 Mm With Double Warshers ( As Per Sample ) 114 Mcb Single Pole 16 Amp 115 Mcb Single Pole 32 Amp 116 Safety Belt 117 Aluminium Cable 6 Mm2 118 Welding Lead 300 Amp, Copper 119 Lugs 2.5 Mm Ring Type 120 Lugs 2.5 Mm U Type 121 2 Core 6 Mm2 Copper Cable For Hand Lamp 122 Stud With Nut Size 60 X 12 Mm ( As Per Sample ) 123 Bolt Size 45 X 16 Mm ( As Per Sample ) 124 Bolt With Nut & With Double Washer Size 66 X 10 Mm ( As Per Sample ) 125 Bolt For Chequer Plate ( As Per Sample ) 126 Bolt With Spring Washer Size 30 X 12 Mm ( As Per Sample ) 127 Hrc Fuse Ns Type 10A 128 Hrc Fuse Ns Type 6A 129 Hrc Fuse Ns Type 4A 130 Hrc Fuse Tia Type 10A 131 Ceiling Fan Condenser 3.1Mfd 132 Fan Regulator 133 Exhaust Fan ( Sweep 331 Mm, Rpm: 1400, Watt: 160W, Phase: 1 Phase, Volt: 230V ( Ac ) , Amp: 0.75A, Hz: 50. 134 Pvc Tape 135 Indication Buld 07 / 10 Thread Type 136 Hrc Fuse Tia 50A 137 Emery Paper ( Per Meter ) 138 Cleaning Brush 2 139 Led Indication Bulb With Holder Fitting 220Vdc 140 Jyoti Make Relay 50V, 4 C / O Type ( Kvv-310 ) 141 Bakelite Fuse Grip 63A 142 L&T Cromptonmake Mcb 250V, 15A Cap 10Ka 143 Crompton Make Mccb, 250V, 40Amp, Cap.-10Ka
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
23.
Agriculture #9173584 Technical Bid
Rewinding Of General Electric Motor & Dg Set Alternator- 1 Rewinding of sq. cage & slipring Induction motor (wire binding)01 HP to 03 HP 2 Rewinding of sq. cage & slipring Induction motor (wire binding)05 HP to 50 HP 3 Rewinding of sq. cage & slipring Induction motor (wire binding)51 HP to 100 HP 4 Rewinding of sq. cage & slipring Induction motor (wire binding)101 to 250 HP 5 Rewinding of sq. cage & slipring Induction motor (wire binding)251 HP to 500 HP 6 Rewinding of Crane- Duty Induction motor wire binding size -10 HP 7 Rewinding of Crane- Duty Induction motor wire binding size -15 HP 8 Rewinding of Crane- Duty Induction motor wire binding size -20 HP 9 Rewinding of Crane- Duty Induction motor wire binding size -25 HP 10 Rewinding of Crane- Duty Induction motor wire binding size -30 HP 11 Rewinding of DC-Excitation coils of dyno-drive-05HP 12 Rewinding of DC-Excitation coils of dyno-drive-20 HP 13 Rewinding of DC-Excitation coils of dyno-drive-30 HP 14 Rewinding of DC-Excitation coils of dyno-drive-40 HP 15 Rewinding of DC-Excitation coils of dyno-drive-60 HP 16 Rewinding of DC-Excitation coils of dyno-drive-75 HP 17 Rewinding of DC-Excitation coils of dyno-drive-100 HP 18 Rewinding of welding transformers 100 Amp to 300Amp-rating 19 Rewinding of welding transformers 310 amp to 600 amp-rating 20 Rewinding of Thruster 100 watt to 150 watt 21 Rewinding of DC Exciter rotor for 1500KW Jyoti make. 22 Rewinding of DC Exciter Armeture for 1500KW Jyoti make. 23 Rewinding of field coils of exciter for 1500KW Jyoti make alternator brush less exciter. 24 Rewinding of armature of excite for 1500KW Jyoti make alternator brush less exciter. 25 Rewinding of field coil of excitor for 300KVA KEC make alternator brush less exciter. 26 Rewinding of field coil of excitor for320 KVA KEC make alternator brush less exciter. 27 Rewinding of Armature of excitor for 300KVA KECMake alternator brushless exciter. 28 Rewinding of Armature of excitor for 320 KVA KEC Make alternator brushless exciter. 29 Rewinding of stator of 320 KEC make DG set Alternator withClass-F Insulation as permanufacturer specification & design 30 Rewinding of rotor of 320 KVA KEC make DG set alternator as perManufacturer specification & design 31 Rewinding of stator of 300 KEC make DG set Alternator with Class-F Insulation as permanufacturer specification &design 32 Rewinding of rotor of 300 KVA KEC make DG set alternator as per Manufacturer specification & design 33 Rewinding of stator of 300 KVA KEC make Alternatror with Class-F Insulation as per manufacturer spec.& design. 34 Rewinding of stator for 18.5KVA Alternator Ruston make 35 Rewinding of rotor for 18.5 KVA alternator Ruston make. 36 Rewinding & complete connection of ckoke for 18.5KVA Alternator. 37 Rewinding of stator for 7.5KVA Alternator, single phase. 38 Rewinding of rotor for 7.5KVA alternator single phase. 39 Rewinding of Exhaust fan all type 40 Rewinding of Celling Fan all type
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 2
Uttar Pradesh View Result →
24.
Agriculture #9138983 Technical Bid
F.O.R. Mill Site Including Freight Rate, Supply Of General Electricals,Fittings Accessories From Reputed Suppliers/Manufacturers F.O.R. Mill Site Including Freight Rate, Supply Of General Electricals,Fittings Accessories From Reputed Suppliers/Manufacturers , Supply Of Electric/Lighting Goods. , Insulating Varnish Elmolufta-1, Dr. Back Make , Insulatingbectrol Red, Dr. Back Make , Insulating Thinner 205 Dr. Back Make , P.V.C. Tape Steel Grip 3/4, -Bhor , Cotton Tape 3/4 , Empire Tape 3/4 , Glass Tape 3/4 , H.T. Black Tape 3/4-J&J Make , No Vexpaper 7Mill & 10Mill -Crimple Make , Leathered Paper 7Mill & 10Mill, Crimple Make , C.T.C. , Crc2-26 , S.T. Holder 300/500 Watt -National Make , S.T. Holder 100 Watt, -National Make , Condensor 2.5 Mfd. Usha/Asian Make , Condensor 4 Mfd.-Usha/Asian , Condenser 33 Mfd. Usha/Asian Make , Power Capacitor -Usha/Asian Make , Bare Copper Wire 6Swg & 8 Swg , Bakalitekit Kat 63 Amp.-Ee Make , Backalitekitkat 100 Amp. -Ee Make , Potensio Meter 500V 3Rk-Pankaj Make , Phase Tester Pocket Type Set-Pankaj Make , Insulated Plier 8-Taparia Make , Insulated Screw Driver-Taparia Make , Insulated Screw Driver 12 -Taparia Make , Hrc Fuse 4Amp.-Ee Make , Hrc Fuse6amp.-Ee , Hrc Fuse 10Amp.-Ee Make , Hrc Fuse 16 Amp.-Ee Make , Hrc Fuse 63 Amp.-Ee Make , Pedestal Type Amper Meter 4 Dial 0-30-Ae Make , Pedestal Type Amper Meter 4 Dial 0-60A -Ae Make , Padistal Type Amper Meter 4 Dial 0-100Am E-Ae Make , Padistal Type Amper Meter 4 Dial 0-100 Ctr100/5 -Ae Make , Padistal Type Amper Meter 4 Dial 0-200 Ctr200/5-Ae Make , Padistal Type Amper Meter 4 Dial 0-300Ctr300/5-Ae Make , Padistal Type Amper Meter 4 Dial 0-400 Ctr400/5-Ae Make , Padistal Type Amper Meter 4 Dial 0-500 Ctr500/5-Ae Make , Padistal Type Amper Meter 4: Dial 0-600 Ctr600/5 -Ae Make , Squire Type Amper Meter 4 Dial 2505 Fuse Type-Ae Make , Squire Type Amper Meter 4 Dial 400/5 Flush Type-Ae Make , Squire Type Amper Meter 4 Dial 600/5 Flush Type-Ae Make , Squire Type Amper Meter 4Dial 800/5 Flush Type-Ae Make , Squire Type Amper Meter 4 Dial 1000/5 Flush Type -Ae Make , Squire Type Amper Meter 4 Dial 3000/5 Flush Type -Ae Make , C. T. 100/5 To 400/5 Flush Type , Plastic Cooling Fan Any Motor 5 Hp , Plastic Cooling Fan Any Motor 7.5Hp , Plastic Cooling Fan Any Motor10hp , Plastic Cooling Fan Any Motor 15 Hp , Plastic Cooling Fan Any Motor 20 Hp , Plastic Cooling Fan Any Motor 30 Hp , Plastic Cooling Fan Any Motor 40 Hp , Plastic Cooling Fan Any Motor60 Hp , Aluminium Cooling Fan Any Motor 15 Hp , Aluminium Cooling Fan Any Motor 40 Hp , Aluminium Cooling Fan Any Motor 60Hp , Pvc Copper Wire -National , Pvc Flexible Copper Wire 7/16X1core -National , Pvc Flexible Copper Wire 7/16X2core-National , Pvc Flexible Copper Wire 19/16X1core-National , Metalic Carbon Bush With Tail 22X32x40mm-Aling , Brass Holder For Above-Aling Make , Slipring For 250 H.P. Motor.Id-72Mm,Od-196Mm,L-140Mm , Slipring For 150 Kw Injection Motor Id-68Mm,Od-185,L-130Mm , Non Metallic Carbon Bush For Cane Unloader 20X20x100mm -Aling , Brass Holder For Above-Aling Make , Metallic Carbon Bush With Tail 10X25x40 For 80 Hp Motor , Carbon Holder For Above As Per Sample-Aling , Slip Ring For 80 Hp Motor Crompton Size Id-60Mmod-120Mm Length 75Mm , Metallic Carbon Bush 20X32x40mm For 150 Hp Motor-Aling Make , Brass Holder For Above-Aling Make , Slip Ring For 150 Hp Kec Motorid-68Mm,Od-180Mm,L-132 , Metalic Carbon Bush With Tail 16X32x40-Aling Make , Brass Holder For Above , Slip Ring For 75 Hp Kec Motor Id-45Mm Od-125Mm L-115Mm , Non Metallic Carbon Bush With Tail For 400 Hp D.C. Motor Size 20X32x36mm -Aling Make , Holder For Above , Fix Arching Contact 400 Amp. Ocb -Mei , V- Bar For 400 A Ocb-Mei , Moving Contact L Type 400 Amp.-Mei , Arching Contact 400 A-Mei , Fix Plate 630 Amp. , Glass Fuse 10 Amp. , Scr Dcr Thruster 1515 Sg , Rotary Switch 25 Amp. -Thakur , Diode 16 Mfr , Diode 40 Mr100 , Diode Ps 040 Cur F10 , Diode 5408 , Diode 321 Um100 , Diode 321 Umr100 , Mush Room Type Push Baton 10 Amp. -Vaishno Make , Contact Element For Aobve10 Amp.-Vaishno Make , Shekel Insulator 3 , Weasel Conductor , Thruster Brack 21 Kgs. Pressure For Cane Unloader , Digital Millimeter Dp-800 Pocket Size -Sanwa Make , Fuse Base 125 Amp-Vaishno Make. , Change Over Switch 400 Amp .-Havells/Kenber Make , Change Over Switch 630 Amp.-Havells/Kenber Make , Miltimeter -Sanwa Make , Dz Fuse 32A B/L , Dz Fuse 35A-B/L , Dz Fuse 63A-B/L , Meager 1000 V Digital -Motwani , Hydraulic Crimping Lug Machine Hand Type , Arc Chute 3Ta-28 -Siemens , Semiconductor Fuse 50 Amp.Gsa-Siemens , Tube Light Side Holder 40 Watt-Anchor , Spare Moving Contact For 3Ta-28 Contactor -Siemens , Spare Moving Contact For 3Ta-24 Contactor-Siemens , Gauge Ring For Dz Fuse 25 Amp-B/L , Gauge Ring For Dz Fuse 35 Amp.B/L , Volt Meter 0-500-A/E , Kilowatt Meter 135X135 2000 Watt-A/E , Kvar Meter 135X1352400-A/E , Pvc Coated Copper Flex. Wire 16 Corex1.5Mm , Resistance 27E40 , Dz Fuse Base 3 Phase Bl Make 25Amp.-B/L , Dz Fuse Base3 Phase Bl Make 63Amp-B/L , Continuity Tester Taparia , Bakalite Rod 2X2 Ft , Arching Chamber 3Ta28-Siemens , Holder Backlite For 3Ta28 Contactor -Siemens , Holder Bakalite For 3Ta-24-Siemens , Bakelite Plate For Terminal Sk70430 , Bakelite Plate 250Amp.Switch Sk70349 , Electronic Speed Controller , Speed Regulator Sardine For Dyno Drive , S.C. Lamp Holder For Sv Lamp.250 Watt/400Watt , Auxiliary Contact 4 No+2Nc For 3Ta-28 Contactor-Siemens , Digital Power Factor Meter 3 Phase 3000/5 5.1/2X5.1/2 , Auxiliary Contact 4 No+4Nc For 3Ta-61 Contactor-Siemens , Pvc Cooling Fan Kec Vertical Motor 52X83mm , Power Cradle Terminal Assly For 4000 Amp.Acb-L&T , Jaw Contact For 4000 Amp. Acb-L&T , Tong Tester Micro Make Ac/Dc 1000 , Push Button Station 8Way Pendent Cob-64 For Crane , Tpn Switch 63 Amp-Kenber/Havells , Thinner 234 -Dr.Back , Copper/Aluminum Lug As Per Price List -Dowells , Complete Fitting And Accessories -Bajaj/Crompton , Tube Light/Hpsv/Mv Lamp/Bulb-Bajaj/Crompton , S.T. Bulb 500 Watt -Mysore , S.T.Bulb 300 Watt-Mysore , Ictp Main Switch 100 Amp-Kenber , Ictp Main Switch 63 Amp-Kenber , Ictp Main Switch 32 Amp-Kenber , Energy Meter , Ff Switch 32 Amp-L&T , Ff Switch 63 Amp-L&T
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 4
Uttar Pradesh View Result →
Uttar Pradesh View Result →
Jharkhand View Result →
27.
Agriculture #8800295 Technical Bid
tender for Motor Rewinding , electric tender for Motor Rewinding insulation class- b , 0 . 5 hp , 720 , 960 , 1440 , 2900 rpm stator , 0 . 75 hp , 720 , 960 , 1440 , 2900 rpm stator , 1 . 00 hp 720 , 960 , 1440 , 2900 rpm stator , 2 . 00 hp 720 , 960 , 1440 , 2900 rpm stator , 3 . 00 hp 720 , 960 , 1440 , 2900 rpm stator , 5 . 00 hp 720 , 960 , 1440 , 2900 rpm stator , 7 . 5 hp 720 , 960 , 1440 , 2900 rpm stator , 10 hp 720 , 960 , 1440 , 2900 rpm stator , 11 . 5 hp 720 , 960 , 1440 , 2900 rpm stator , 12 . 5 hp 720 , 960 , 1440 , 2900 rpm stator , 15 . 00 hp 720 , 960 , 1440 , 2900 rpm stator , 20 hp to 120 hp , 720 , 960 , 1440 , 2900 rpm stator , rotor , rewinding of crane duty motor 15 hp , 960 rpm , insulation class- f rotor , stator , 25 hp , 960 rpm , insulation class- f rotor , stator , slipring motor , 75 hp , 1440 rpm , squral cage rotor of alluminium binding converted into copper strip binding and dynamic balancing with certificate . , 120 hp to 250 hp , 960 , 1440 rpm strip binding rotor , stator , 250 hp , 585 rpm , strip binding rotor , stator , 265 hp , 960 rpm , strip binding rotor , stator , 400 hp , 720 rpm , strip binding rotor , stator , three speed motor insulation class - f , centrifugal motor 110 kw ac 1st speed upto 200 rpm , 2nd & 3rd speed upto 450 rpm & 960 rpm , dc-motor d-412 kcp centrifugal machine 167 kv , 1250 rpm rotor , stator , buffing & policing of rotor commutator of dc motor for d-412 centrifugal machine , welding machine spares rewinding , primary coil , secondary coil , choke coil , d . c . welding machine rectifier 230 / 24 volt , d . g . set spares rewinding , 166 kva alternator of dg set 1500 rpm , 50hz , pole of rotor 4 nos . complete rewinding h class enamelled copper strip with material and labour and dynamic balancing with test certificate rotor , stator , 320 kva alternator of dg set 1500 rpm rotor , stator , 166 kva alternator set excitation system ( booster ) , 320 kva alternator excitor rotor , 320 kva alternator excitor filed coil , rewinding and repair of submersible pump motor 15 hp , 25 hp , complete rewinding of 1875 kva excitor rotor ( jyoti make ) of 1500 kw alternator with satisfactory testing & trial on load . , other rewinding work , break thruster mootor , cooler fan single speed / three speed , exhaust fan single phase / three speed , rewinding of celling fan , brass holder for turbine excitor , copper carbon brush for turbine excitor , repairing of d . c . excitor ( jyoti make ) 15 kw with packing & cutting of commutator & re-soldering of lug etc . complete , charges for supply of diode fixing plate alluminium for 1875 kva turbine alternator , supply & fixing of variable set complete ( i ) 4 amp . 270 volt , ii ) 8 amp . 270 volt . , earthing electrode size 75 mm x 3000 mm with chemical bags and fitting at mill site . , rewinding of crane duty motor without material at our mill site 15 hp , 960 rpm , insulation class- f rotor , stator , 25 hp , 960 rpm , insulation class- f rotor , stator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 2
Uttarakhand View Result →
28.
Heavy Industries and Public Enterprises #8732345 Technical Bid
Rfq-8475 Preventive And Breakdown Maintenance Jobs Of Electrical Installations At Concentrator Plant . Preventive And Breakdown Maintenance Jobs Of Electrical Installations At Concentrator Plant . , Eot Cranes Maintenance ( 30/5 T & 20/5 T ) Preventive & Breakdown Maintenance Of 30/5 T And 20/5 T Eot Cranes . Job Includes Maintenance Of Control Panels Of Common Protection , Main Hoist Aux . Hoist , Long Travel , Cross Travel , Resistance Box , Cross Rails And Trolleys , Long Rails And Trolleys Associated Cables , Motor Terminals And Slip Rings Master Controllers , Limit Switches , Thyrister Brake Motor / Coil , Junction Boxes Etc . General Checking Of One Or Both Cranes . , Maintenance Of Any Of The Sub Assemblies As Per The Description Of Job Mentioned In The Detailed Scope Of Work ( Annexure-Ii ) , Eot Crane Maintenance ( 5 T , 5T , Tackle ) Preventive And Breakdown Maintenance Of 5T ( Wmi ) , 5T ( Floatation ) , And Tackle Crane ( Filtration ) . Job Includes Maintenance Of Control Panel Of Hoist Long Travel , Cross Travel , Resistance Box , Cross Rails And Trolleys , Long Rails And Trolleys , Associated Cables , Motor Terminals And Slip Rings , Limit Switches , Master Controllers . Pushbuttons Thruster Break Coil / Motor Etc . Note:- Each Attempt Would Have A Duration Of 02 Hours For Preventive Maintenance & In Case Of Breakdown Actual Time Till The Fault Is Cleared Shall Be Taken Into Account . , Oil Circuit Breaker MaintenanceThe Job Includes Complete General Maintenance Of Oil Circuit Breaker Of The Transformers , Cleaning Of Ocb , Connection Checking , Insulator Checking With Their Operation Mechanism Manual/Electric , Oil Level Checking , Oil Testing , Removal Of Any Oil Leakage Faults . , Mcc & Motor Ce Box MaintenancePreventive And Breakdown Maintenance Of Motors , Mcc Starter Panels , Control & Power Cables , Connections And Disconnection Of Motors , Starters , Slip Ring & Exciter For Following Items:A ) 225 Hp To 500Hp , Mcc & Motor Ce Box MaintenancePreventive And Breakdown Maintenance Of Motors , Mcc Starter Panels , Control & Power Cables , Connections And Disconnection Of Motors , Starters , Slip Ring & Exciter For Following Items:B ) 100 Hp To 220Hp , Mcc & Motor Ce Box MaintenancePreventive And Breakdown Maintenance Of Motors , Mcc Starter Panels , Control & Power Cables , Connections And Disconnection Of Motors , Starters , Slip Ring & Exciter For Following Items:C ) 25Hp To 90Hp , Mcc & Motor Ce Box MaintenancePreventive And Breakdown Maintenance Of Motors , Mcc Starter Panels , Control & Power Cables , Connections And Disconnection Of Motors , Starters , Slip Ring & Exciter For Following Items:D ) 7 . 5Hp To 20Hp , Mcc & Motor Ce Box MaintenancePreventive And Breakdown Maintenance Of Motors , Mcc Starter Panels , Control & Power Cables , Connections And Disconnection Of Motors , Starters , Slip Ring & Exciter For Following Items:E ) 0 . 5Hp To 5Hp , Repairing Of Lighting & Power Distribution Panels . Job Involves Checking , Dedusting Cleaning Of Panel Components , Replacing /Repairing Existing Switches Fuse Bases Including Wiring , Strengthening /Repair Of Base Supports , Sheds Doors Etc . And Rewiring For Load Balancing , Replacement/Repair Of Other Auxiliary Components Like Terminals , Indications Etc . , Dismantling & Re Fixing Of Old Light Fittings Job Includes Removing , Repairing . Cleaning & Refixing With The Help Of Gitties , Ms Brackets , Pipes Etc . And Finally Commissioning Of The Following With Proper Wiring/Cabling And Dressing:I ) Tube Light Fittings Both Single And Double Tube Rod , Dismantling & Re Fixing Of Old Light Fittings Job Includes Removing , Repairing . Cleaning & Refixing With The Help Of Gitties , Ms Brackets , Pipes Etc . And Finally Commissioning Of The Following With Proper Wiring/Cabling And Dressing:Ii ) Industrial Type Hpmv/ Hpsv Fittings 70 W To 400 W , 220 Volts . /Led Light Fittings , Installation Of New Light Fittings Job Includes Installation & Commissioning Of Tube Light Fittings , Led Fittings , Preparing Support From Ms Angles , Pipes , And Clamps Are Included In The Scope Of Work . , Wiring/ CablingJob Involves Removing The Old/ Faulty Cables/Conduit & Replacing New Cables In Its Place Up To 2 . 5 Mm2 , 04 Core . Job Also Includes Clamping , Dressing The Cable & Termination At Supply/Light Fittings . , Tracing And Rectification Of Light Circuit Faults . Job Includes Tracing Of The Lighting Circuit Faults Like Burning / Opening Of Joints , Faults In Lamps , Holders , Short Circuits , Supply Missing Etc . , Shifting Of Motors , Electrical Panels Etc As Per Detail In The Scope Of Work . , Unskilled Assistance Job As Per Detail In Scope Of Work: Cleaning Of Grinding Section Mcc , Unskilled Assistance Job As Per Detail In Scope Of Work:Cleaning Of Crushing Section Mcc , Unskilled Assistance Job As Per Detail In Scope Of Work: Cleaning Of Filtration Section Mcc , Unskilled Assistance Job As Per Detail In Scope Of Work: Cleaning Of Cooling Tower Mcc , Unskilled Assistance Job As Per Detail In Scope Of Work: Cleaning Of Transformer Room , Unskilled Assistance Job As Per Detail In Scope Of Work: Cleaning Of Cable Tray And Cable Trench
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Rajasthan View Result →
29.
Defence #8614481 AOC
Tender For Repair / Maintenance And Load Testing Of Hot/Eot Crane, Motorised Door And Other Misc Works At Hemrl Under Ge(I) Rnd Pashan; 1 Material and labour for Disconnecting and removing damaged gears, bearings etc of main drive gear assembly for servicing, repair including loading / unloadingand transporting to nearest work shop including refixing connecting commissioning and testing in position after carry out necessary repair and replacement of following items complete all as specified and as directed.(i) Supply and fix both side ball bearing with existing size and make as per numbers specified by OEM. Make SKF or equivalent as approved by GE complete all as specified including dismantling taking out old unserviceable bearing gear assembly complete all as specified and as directed.(ii) Replacement of worn out gear assembly (iii)Replacement of both side oil seals & gear oil of approved make and grade.(iv) Dismantling/taking down of any part of the crane which is not accessible from the upper surface of the crane, the contractor shall arrange suitable ladder/scaffolding and the rate for the same shall be deemed to be included in the quoted rate.Note : Contractors are advised to visit site before quoting the rates. 2 Comprehensive maintenance consisting of normal repairs, Periodical and preventive maintenance and attending day-to-day break down / complaints offollowing cranes complete all as specified and as directed by Engr-in-charge (a) Manually operated chain pulley block any type of capacity 0.5 Ton to 5 Ton = 12 Nos 3 (b)Electrically operated over head travelling (EOT)cranes of capacityabove 2 Ton up to 5 Ton 4 (c)Electrically operated over head travelling (EOT) Flame proof cranes of capacityabove 2 Ton up to 5 Ton 5 (d)Electrically operated over head travelling (EOT) Flame proof cranes of capacityabove 7.5 Ton up to 20 Ton NOTES for item No 2 to 5:(i) Any complaints regarding breakdown must be attended within 24 hours failing which an amount of Rs 250/- per day will be recovered from RARs. In case of major repair / problems beyond the scope of contract, contractor has to intimate the department within 48 hours failing which a recovery as mentioned above will be affected.(ii)Quoted rates are deemed to be inclusive of the cost of all materials and labour required for dismantling and assembling of equipment in whole as a part there of and cost of minor spares and material required such as grease, cotton waste,lugs,nut bolts,washers, insulation tapes etc(iii) The cranes repair will be measured and paid on monthly basis.(iv)Major defects such as Long Travel /Cross Travel and hoist motor rewinding, replacment of faultybearings,shaft and gear assembly / VFD failure / Soft starter electronic cards etc does not includes in the rates quoted. (v) Materials like MCCBs, shoe brakes, brake drums, contactors, relays, steel wire ropes, etc.required for repairing will be measured and paid separately under relevant items of schedule as supply only.(vi)The quoted rate includes the cleaning of cranes ofdifferent capacity, cleaning of respective tracks and busbars.(vii) Repair/servicing to crane, LT panels, thruster, brakes, electric motors,greasing of steel ropes,limit switches,pendent push buttons complete on monthly basis includes in quoted rates. comprehansive maint, normal repairs, periodical preventive maint, day to day complaints / breakdown carried out for each crane in the entire months shall be measured as one Job.(viii) Quoted rate is deemed to be inclusive all the clothing, safety equipment and other T & P required for carrying out the repairs / maintance. The contractor has to liase with the department in case of requirement of electric shut down of each machinery and has to make the machinery functional for the carrying out maintenance. 6 Testing full load test, deflection test, capacity test, speed test and break test and serviceability checking of each crane and hoist by authorized person in presence of Engr-in-Charge, JE (E/M) and Users representative and test certificate with list of defects if anyto be produced in duplicate. The capacities of cranes, hoiststo be tested are as under :-(a) Manually operated chain pulley block any type of capacity 1.5 Ton to 5 Ton 7 Ditto all as per item No. 6 here in before but for(c)Electrically operated over head travelling (EOT)cranes of capacityabove 2 Ton up to 5 Ton 8 Ditto all as per item No. 6 here in before but for(d)Electrically operated over head travelling (EOT) Flame proof cranes of capacityabove 2 Ton up to 5 Ton 9 Ditto all as per item No. 6 here in before but for(d)Electrically operated over head travelling (EOT) Flame proof cranes of capacityabove 7.5 Ton up to 20 TonNOTES FOR SCHEDULE A ITEM No. 6 to 9(i) Loads requiredfor testing to be arranged by contractor(ii)The Load test to be carried out by recognized / authorized Govt Agenciesin the presence of Engr-in-charge & Users rep.(iii)The Load test report as per Performa at 100% load for all motions from recognized persons as specified in Note (ii) above duly signed.(iv)Load testing is inclusive of shifting / transporting the load place to place, unloading will be arranged by the contractor including required ropes, man power etc., for handling the load.(v) Rates quoted is deemed to include for the above provisions. 10 Supply only spare parts suitable for the HOT / EOT/ EOT (Flameproof) cranes.(a)Power contactors 3 pole with NO + NC up to 22 Amps, MNX type 11 (b)Power contactors 3 pole with NO + NC 32 amps , MNX type 12 (c)Power contactors 3 pole with NO + NC 40 amps, MNX type 13 (d)Power contactors 3 pole with NO + NC 70 amps, MNX type 14 (e) Thermal Over load relay0.9-1.5Amps, MN2 type 15 (f) Thermal Over load relay 1.4- 2.1Amps, MN2 type 16 (g) Thermal Over load relay 4.5 - 7.5 Amps, MN2 type 17 (h) Thermal Over load relay 9-15 Amps, MN2 type 18 (j) Steel wire rope multi stranded8 mm dia 19 (k) Steel wire rope multi stranded10mm dia 20 (l) Steel wire rope multi stranded 12 mm Dia 21 (m) Steel wire rope multi stranded 18 mm Dia 22 (n) PVC Coated & PVCinsulated copper conductor multi stranded 1.5sqmm 19 core 23 (o) PVC Coated & PVCinsulated copper conductor multi stranded 1.5sqmm 12 core 24 (p) PVC Coated & PVCinsulated copper conductor multi stranded 4 sqmm 4 core 25 (q) PVC Coated & PVCinsulated copper conductor multi stranded 6 sqmm 4 core 26 (r ) PVC Coated & PVCinsulated copper conductor multi stranded 10 sqmm 4 core 27 (s) Crane gear oil EP -320 thick level 28 (t) Crane thruster oil (hydraulic oil) 29 (u) Hydraulic brake thruster (Flameproof) of capacity 18 Kgs including first fill of hydraulic oil 30 (v) Heavy duty cast iron break shoe treated with fabric lining with aluminium rivets of LT / CT/hoist brake drum of 100 to 250 mm dia 31 (w)Rewinding of control transformer 415/230/110 Volts 32 (x) Limit switch suitable for 2 to 15 Ton assembly 33 (y) Flame Proof Limit switch suitable for 2 to 10Ton assembly 34 (z) Push button 1 NO + 1 NC 35 (aa) Electronic timer with range 03 sec to 120 sec for control panels of EOT cranes 36 (ab) Single phase preventer 37 (ac) PVC cable carrier /Cable Trolley size P-20 suitable for carrying cable of size up to 4 core 4 sqmm, 38 (ad) PVC cable carrier /Cable Trolley size P-50 suitable for carrying cables of sizes up to 24 core 15 sqmm &4 Core 10 Sqmm, 39 (ae) Neon indiator lamp 24 volts 40 Supply only Push button Pendents 10 wayfor cranesincluding suitable size chain all as per sample and details complete all as specified and directed. 41 Dismantling / Removing existing control & power wiring of long travel/cross travel/main hoist/auxilarry hoist control Panel wiring of EOT Crane and rewiring with PVC insulated copper wire 1.5 /2.5 /4 /6 Sq mm for control & 10/16 Sq. mm for power wiring for proper sequential working of contactors with delay timer, over load relay,MCCBs, MCBs etc of slip ring motor of different capacity by making proper connections to contactors, relays, fuses, MCCBs, MCB including testing commissioning complete all as specified and directed . Note:- (i)Cost of material such as PVC channels, lugs, terminals dinrails connectors, welding work for panel wiring on Eot crane is deemed to include in the quoted rate.(ii)The quoted rate include the cost of painting of existing control panel with two coats of existing colour paints and any adition/alteration in the existing control panel complete all as directed by Engr-in-charge. (iii) Required components such as PVC copper cable, MCCBs, MCBs, HRC fuse, power contactors, relays, timers, Single phase preventor , push buttons will be measured and paid separetly under relevent item.(iv) The work is to be done in such a manner that it should not hamper the working schedule of the user. (v) Contractor should visit the site before quoting the rates as the work have to carried out at the height approx 10 to 15 metres(vi) Control wiring should be done in such a manner to meet the logic and operation.Suitable skilled rep shall be deputed to do the same. Necessary test reports to be submitted after completion of work.(vii) Contractor should provide skilled supervisor and necessary safety equipments, T&P for execution of work. 42 Supply and fix in repairs Flameproof / Weatherproof LED Well Glass Light Fitting suitable for 45 Watt, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with LED COB / SMD (Bridge, Cree, Citizen) including suitable electronic driver including necessary fixing arrangments and connecting up complete all as specified and directed by Eng-in charge. 43 Supply and fix in repairs Flameproof / Weatherproof LED Well Glass Light Fitting suitable for 70 Watt, body made out of aluminium alloy LM -6 body epoxy painted with wire guard relfector, flameproof Heat Resistant Clear Toughened ‘Type‐ A’ with LED COB / SMD (Bridge, Cree, Citizen) including suitable electronic driver including necessary fixing arrangments and connecting up complete all as specified and directed by Eng-in charge. 44 Modification and completely new wiring of control panel including supply and fix VVVF Drive suitable for 15 to 20 tonne crane. Complete all as specified and directed by Engr-in-Charge 45 Dismantling after disconnecting of all electric connection of soft starter of any make and sent to authorised/manufacturer workshop for servicing, repair & testing and replacement of all unserviceable parts whichever required to make it serviceable in all respect including programmeable card as per recommendation of manufacturer and brought backto site and refixing/reconnection of electric connection on its original position and testing and commissioning with full load complete all as specified and as directed by Engr-in-Charge 46 Material and labour for disconnecting from main supply, Dismantling and taking downexisting reduction gear box device from EOT/ HOT crane of 2 To 10 Ton Capacity hoist /CT/ LT motion traverse for carry out renewal of following unservicebleParts / Carry out miscellaneous repairs to gear box, oil leakage and refining the gear box after checking alignment of brake drum & motor, motor & gear box, in existing position, complete all as specified and as directed by the Engr-in-Charge including the following:-(a) Renewal ofworn out shaft seals & bearing.(b) Renewal of internal cover gasket.(c) Renewal of Unserviceable Gear couplingwith nuts & bolts complete.(d) Renewal of worn outdriving/ driven keys, gaskets of capacity not exc 10 ton complete all as specified and directed by Engr-in-charge.Note : (a)All Minor spares including gaskets, keys, Nuts, Bolts deemed to be included in above quoted rates.(b)Spares like driving / driven gears, oil / Shaft seal, bearings will be measured and paid separately under relevant item of sch A as supply only. 47 Supply only driving / driven gear of size suitable for gear box of crane capacity 2 Tonne to 10 Tonne 48 Supply only shaft seal for gear box of crane capacity 2 Tonne to 10 Tonne 49 Supply only coupling for gear box of crane capacity 2 Tonne to 10 Tonne 50 Disconnecting the electrical and mechanical connection of burnt electrical motorstransporting from the site / location to work shop and back. Rewinding of electrical motors by dismantling and removing the burnt cut copper winding wire cleaning the slots of stator with petrol and brushes winding polyester based super enameledcopper wire of same gauge of original one with proper class of insulation including varnishing and heating the coil and remove air bubbles complete from stator/rotor after rewinding reassembling all parts including reinstalling connection to original position and testing on full load complete all as specified and directed by Engineer in charge for different capacity of motor as per following:-a)1 HP to 2 HP 51 b) 3 HP to 5 HP 52 c)5 HP to 7.5 HP 53 d)7.5 HP to 10 HP 54 Material and labour for dismantling, taking down motor for servicing, replacement of unserviceable bearing, seal, bush complete dismantling of brake drum, motor, coupling etc and refixing same after repair work for hoist CT (cross travel) and LT (long travel) motion motor, complete all as specified and as directed by Engr-in-charge for a)1 HP to 2 HP 55 b) 3 HP to 5 HP 56 c)5 HP to 7.5 HP 57 d) 7.5 HP to 10 HPNote: (a) All Minor spares including gaskets, keys, Nuts, Bolts are included in above quoted rates.(b)Spares like bearings, fan bladewill be measured and paid separately under relevant item of sch A as supply only. 58 Supply only followingbearing as per numbers given below complete all as specified and directed. a) 6208 Z or as per existing make 59 b) 6310 Zor as per existing make 60 c) 6008 Zor as per existing make 61 d) 22209 Eor as per existing make 62 Dismantling of existing unserviceable male-female combination of crane socketfrom existing position and replacement of newflame proof crane socket / switch socket and plug combined in LM 6 body 4P +Earth of 32 A rating 3 Ph 500V suitable for 2 to 20Ton capacity EOT crane complete all as specified and directed by Engr-in-Charge. 63 Dismantling of existing unserviceable male-female combination of crane socketfrom existing position and replacement of newflame proof crane socket / switch socket and plug combined in LM 6 body 4P +Earth of 63 A rating 3 Ph 500V suitable for 2 to 20Ton capacity EOT crane complete all as specified and directed by Engr-in-Charge. 64 Supply and fix in repair MCCB 63 amps 16 KA capacity4 pole, 415 Volt AC 50 HzAdjustable thermal magnetic release including suitable arrangement to existing LT panel for proper seating/operation complete all as specified and as directed 65 Supply and fix in repair MCCB 100 Amps 16 KA capacity 3 pole, 415 Volt AC 50 HzAdjustable thermal magnetic release including suitable arrangement to existing LT panel for proper seating/operation complete all as specified and as directed 66 Supply and fix in repair MCCB 160 Amps 36 KA capacity4 pole, 415 Volt AC 50 HzAdjustable thermal magnetic release including suitable arrangement to existing LT panel for proper seating/operation complete all as specified and as directed 67 Supply and fix in repair MCCB 200 Amps 36 KA capacity3 pole, 415 Volt AC 50 HzAdjustable thermal magnetic release including suitable arrangement to existing LT panel for proper seating/operation complete all as specified and as directed 68 Supply and fix in repair MCCB 250 Amps 36 KA capacity3 pole, 415 Volt AC 50 HzAdjustable thermal magnetic releaseincluding suitable arrangement to existing LT panel for proper seating/operation complete all as specified and as directed 69 Supply and fix in repair MCCB 400 Amps 36 KA capacity3 pole, 415 Volt AC 50 HzAdjustable thermal magnetic releaseincluding suitable arrangement to existing LT panel for proper seating/operation complete all as specified and as directed 70 Supply and fixingin repairs ACB 4 pole415 V with adjustable thermal and magneticrelease (Manual Drawout type) of capacity 800 Amps complete all as specified and directed. 71 Supply and fix in repairsMCB TPN 40 AMP C curve 10 KA 415 Volt complete all as specified and directed. 72 Supply and fix in repairsMCB TPN 63 AMP C curve 10 KA 415 Volt complete all as specified and directed. 73 Supply and fix in repairsMCB TPN 125 AMP C curve 10 KA 415 Volt complete all as specified and directed. 74 Supply and fix in repairsMCB SP C curve 6 to 32 Amps 240V complete all as specified and directed. 75 Supply and fix in repairsMCB SP C curve 40 Amps 240V complete all as specified and directed. 76 Supply and fix in repairsMCB SP C curve 63 Amps 240V complete all as specified and directed. 77 Material and labout for maintenance free chemical bore earthing of dual pipe technology of 3 M long with outer pipe diameter of 88mm & inner pipe diameter 48mm, the pipes outer is properly galvanished for 80-120 micron and wall thickness of inner pipe 3.0 mm and 2.0 mm of outer pipe. There should be terminal for connection of 75 x 6.0 mm with two holes of 14mm diameter. Electrode is duly filled with the highly conductive material with sealing at both ends with lead terminal of 75 x 5.2 mm at top. The electrode shall be duly tested & certified by CPRI, Govt of India for a minimum short circuit current of 42 kArs for 1 second with initial pick of 88.2 KA. The electrode is tested in MSME Govt of India. Teh electrode istested for salt spray testing as per B 117-09 for corrosion for minimum 500 hours from NABL accredited lab CHEM. T 298/MECH.T299 & ISO/IEC 17025 accredited material testing lab, supply of earth enhancing compound 2 Bags of 25Kgs each. The chemical compound should be tested and certified by any international accredited and BIS accredited laboratory. The testing laboratory should be ISO 9001 & ISO 14001 certified. The earth enhancing compound should be tested referred to protocol IS 1350 & IEC62321/111/54/CDV. The pH value of compound should be between 7 to 8. The content of mercury (Hg) & Hexachromium shoudl be below detection level. including necessary boring in ground of 150/200mm dia in any type of strata connecting to test point including provision of chamber cover complete all as specified and directed by Engr-in-Charge.Note: The earth resistance shall be less than 1 ohms. (ii) Contractor shall improve the desired earthing resistance within the permissible limit without any extra cost. 78 Material and labour for Earth continutity conductor or main earthing lead fixed to wall /burried in ground /drawn in pipes or fixed to poles or any other indicated situations for loop earthing of GI strips of size 32 x 6 mm including connecting complete all as specified and directed. 79 Material and Labour for Cleaning total structure of crane 2 to 5 Ton, Remove all grease & Oil from crane parts, preparation of old painted steel/CI surface of crane (i.e motor panel board, handle cross arms, Horizontal Arms, grills, MS Plate, ladder etc complete) painting of crane with existing paints one final coats over one initial coat complete all as specified and directed by Engr-in-charge. 80 Material and Labour for Cleaning total structure of crane 7.5 to 15 Ton, Remove all grease & Oil from crane parts, preparation of old painted steel/CI surface of crane (i.e motor panel board, handle cross arms, Horizontal Arms, grills, MS Plate, ladder etc complete) painting of crane with existing paints one final coats over one initial coat complete all as specified and directed by Engr-in-charge. 81 Material and Labour for Cleaning total structure of flame proof crane 2 to 5 Ton, Remove all grease & Oil from crane parts, preparation of old painted steel/CI surface of crane (i.e motor panel board, handle cross arms, Horizontal Arms, grills, MS Plate, ladder etc complete) painting of crane with existing flame proofpaints one final coats over one initial coat complete all as specified and directed by Engr-in-charge. 82 Material and Labour for Cleaning total structure of flame proof crane 5 to 15 Ton, Remove all grease & Oil from crane parts, preparation of old painted steel/CI surface of crane (i.e motor panel board, handle cross arms, Horizontal Arms, grills, MS Plate, ladder etc complete) painting of crane with existing flame proofpaints one final coats over one initial coat complete all as specified and directed by Engr-in-charge.
Contract Date: Jan 17, 2026 Contract Value : ₹ 38.62 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Maharashtra View Result →
30.
Defence #8558747 AOC
Tender For Repair/ Maintenance To Eot Cranes And Connected Works At Patiala Mil Station.; 1 Overall preventive maintenance and regular maintenance of electrically operated over head travelling cranes (EOT) double girder type of 15 tonne capacity 02 Nos and 5 tonne capacity 01 No comprising of electric motors for long travel, hoist motion, creeping micro speed and electrical control panelsconsisting of MCCBs/main switches, step down transformers, contactors, HRC fuses & mechanical wire rope with drum, brake units, gear boxes, oil levels, motor bed ends, electrical control cables etc. throughout the time period of the contract comprising of material, labour and T&P for routine, periodical, preventive maintenance or breakdown repair to make EOT crane functionalall time complete all as directed by the Engr-in-charge. 2 Note: (i) All lubricants incl Gear Oil 80W90, Fine quality Grease, spares and Unserviceable parts required for maintenance of cranes will be measured separately however labour work is inclusive in this item. The contractor shall check for any malfunctioning of the cranes during preventive maintenance. Preventive/regular maintenance to be performed for all cranes at least twice in a months, the contractor shall also be liable for maintenance and repair job as per fault/ defect occurrence without any extra cost.(ii) This item includes unlimited call response from contractor. Minor and Major break-down calls shall be attended within 12 hours from the time of intimation and Crane shall be made operational within 24 hours and 72 hours respectively without any extra charge.(iii) The maintenance of crane throughout the contract period shall be responsibility of contractor. Thus contractor should visit the site prior to bidding.(iv) Contractor is required to maintain breakdown/ rectification register duly signed by both parties i e Contractor and OC MR Bay/JCO,s incharge.(v) During checking/ inspection of EOT crane if any part found unserviceable replacement of same to be carried out after confirmation from Engr-in-Charge.(vi) During the visit trademens/workers will check every movable parts physically and tighten the all nuts/bolts and mark them with permanent marker upto the entire satisfaction of JE E&M/Engr-in-Charge.(vii) Contractor is fully responsible for safety of deployed person at site, all necessary tools, plants and safety equipments will be provided by contractor without any extra cost. If any mishappening happens with tradesman it will be sole responsibility of the contractor.(viii) During maintanance if any item found unserviceable which is not catered in the BOQ will be provided by department under schedule B upon intimation from the contractor, however, labour work is inclusive in this item. 3 Material and labor for Load testing of double girder EOT Gantry cranes of 15 ton capacity at full load capacity including making arrangements of load complete all as directed by the Engr-in-charge. 4 Material and labor for Load testing of Double Girder EOT Gantry crane of 5 ton capacity at full load capacity including making arrangements of load complete all as directed by the Engr-in-charge. 5 Supply only in replacement step down transformer suitable for 15 & 5 ton EOT gantry complete all as specified and as directed 6 Supply onlyin replacement brake liners of electro thruster brake assembly for crane of capacity 15 & 5 ton complete all as specified and as directed 7 Supply onlyin replacement contactor 3 phase, 415 volts, 30 Amps, type ML 2 complete all as specified and as directed. 8 Supply only in replacement contactor 3 phase, 415 volts, 16 Amps, type ML 1 complete all as specified and as directed. 9 Supply only in replacement contactor 3 phase, 415 volts, 12 Amps, type ML 0 complete all as specified and as directed. 10 Supply only in replacement breaking resister 415 Volts, 3 phase, for 15 HP Motor capacity complete all as specified and as directed 11 Supply only in replacement breaking resister 415 Volts, 3 phase, for 7.5 HP Motor capacity complete all as specified and as directed. 12 Supply onlyin replacement limit switch, 40 amps rating with one NO & one NC for long travel & cross travel complete all as specified and as directed 13 Supply only in replacement limit switch, 40 amps rating with rotary gear of main hoist complete all as specified and as directed 14 Supply only in replacement wheel bearing size 6207 after taking down unserviceable / worn-out wheel bearing as existing at site complete all as specified and as directed. 15 Supply only in replacement variable speed drive in weather proof sheet metal enclosure as per existing make and model suitable for electric operated crane 15 ton capacity of 18 HP crane installed at site to control cross travel speed and making necessary connections including testing complete all as specified and directed. 16 Supply and fixing wheel bearing size 6207 after taking down unserviceable / worn-out wheel bearing as existing at site complete all as specified and as directed. 17 Material and labour for taking out burnt motor 0.5 HP and rewinding of motor capacity 0.5 HP with super enameled copper conductor as per existing weight, size and design etc including varnishing baking and testing after taking down unserviceable / wornout winding of flame proof / non flame proof motor mounted on rail complete all as specified and as directed.Note:- Rate for transportation of the motor to the raputated workshop and bring back to site after repairis deemed to be included in quoted rate of the schedule. 18 Material and labour for taking out burnt motor 3 HP and rewinding of motor capacity 3 HP with and including super enameled copper conductor as per existing weight, size and design etc including varnishing baking and testing after taking down unserviceable / wornout winding of flame proof / non flame proof motor mounted on rail complete all as specified and as directed.Note:- Rate for transportation of the motor to the raputated workshop and bring back to site after repair is deemed to be included in quoted rate of the schedule. 19 Material and labour for taking out burnt motor 15 HP and rewinding of motor capacity 15 HP, 415 volt, 3 phase with and including super enameled copper conductor as per existing weight, size and design etc including varnishing baking and testing after taking down unserviceable / wornout winding of flame proof / non flame proof motor mounted on rail complete all as specified and as directed.Note:- Rate for transportation of the motor to the raputated workshop and bring back to site is deemed to be included in quoted rate of the schedule. 20 Supply only in replacement control cable, 1.5 sq mm 4 core, multistranded copper conductor, unarmoured, 1100 volt grade,FRLSH PVC insulated PVC sheathed with supporting steel/GI wire for fixing complete all as specified and as directed. 21 Supply only in replacement control cable, 2.5 sq mm 4 core, multistranded copper conductor, unarmoured, 1100 volt grade,FRLSH PVC insulated PVC sheathed with supporting steel/GI wire for fixing complete all as specified and as directed. 22 Supply only in replacement control cable, 1.5 sq mm 16 core, multistranded copper conductor, unarmoured, 1100 volt grade,FRLSH PVC insulated PVC sheathed with supporting steel/GI wire for fixing complete all as specified and as directed. 23 Supply only in replacement steel wire rope 12 mm dia with hemp core rope made in 6x36 pattern length of existing make & specification suitable for 5 ton capacity gantry fixed with suitable size D clamp, nuts, bolts and washerscomplete all as specified and directed. 24 Supply only in replacement steel wire rope 22 mm dia with hemp core rope made in 6x36 pattern length of existing make & specification suitable for 15 ton capacity gantry fixed with suitable size D clamp, nuts, bolts and washers complete all as specified and directed 25 Supply onlytransformer oilall as specified and directed by Engr-in-Charge. 26 Supply only fine quality grease (all purpose) over the moving parts/rail/gears of EOT cranesall as specified and directed by Engr-in-Charge. 27 Supply only of gear oil 80W90all as directed by Engr-in-Charge. 28 M&L for painting by using spray painting method for crane ( EOT ) double girder type of15 Ton capacity2 Nos with two coats of superior quality synthetic enamel paint over one coat of red oxide primer after cleaning of existing surface ,removing rustcomplete all as specified anddirected by Engr-in-Charge. 29 M&L for painting by using spray painting method for crane ( EOT ) double girder type of05 Ton capacity2 Nos with two coats of superior quality synthetic enamel paint over one coat of red oxide primer after cleaning of existing surface ,removing rustcomplete all as specified anddirected by Engr-in-Charge. 30 M&L for dismantling of unserviceable rotating shaft & keyways from travelling crab and transporting to & fro to workshop for checking & repairing and making new keyways including inserting new key as per existing/site requirement for fully making functional of EOT crane complete all as directed by Engr-in-Charge.
Contract Date: Jan 05, 2026 Contract Value : ₹ 9.23 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Punjab View Result →
31.
Public Administrative Department #8499232 AOC
Tender For Purchase Of Hydraulic Cane Unloader Grab And Spares E-Tender For Purchase Of Hydrulic Grab , Supply, Erection And Commissioning Of Hydraulically Operated Grab Made Out Of Tested Steel Section Fitted With Hydraulic Power Pack Consisting Of 15 Hp S1 Duty Electric Motor, Hydraulic Pump, Direction Control Valve, Cylinders, Filtration System Fitted On Oil Reservoir Having Ten Fingers Tips Hard Faced Along With 34 Kg Thruster. ( Fhe Make ) , Spare For Hydraulic Cane Unloader ( Fhe Make ) , Direction Control Valve 24V, Vickers Make , Connector For Dcv ( 24 Volt ) , Power Supply 24V Dc, 5A , Return Line Filter Element 926169, Parker Usa , Oil Level Indicator , Suction Strainer Sc-3-40 , Air Filter Se-20-25-U , Hose Pipe 3 / 4 X 22 Long One Side 90 Degree , Hose Pipe 3 / 4 X 25 Long One Side 90 Degree , Hydex Gear Coupling And Sleeve Set No.48 , Seal Kit For 80Mm Dia Hydraulic Cylinder , Seal Kit For Hydraulic Pump Pvq-40 , Pin For Grab Cylinder , Bearing For Hydraulic Cylinder , Metalon Bush ( 45X55x50 ) For Grab , Adaptor Set For Hydraulic Grab , O Ring Set For Dcv , Gun Metel Bush For Grab Cylinder , Solenoid Coil Of Direction Control Valve , Hydraulic Pump Pvq-40, Vickers Make , Copper Washer Set , Brake Drum Coupling 250Mm With S3 Bush ( Gear Type ) , Thruster Brake 34Kg / 250Mm , Hydraulic Cylinder 80Mm Dia For Grab Left / Right
Contract Date: Dec 26, 2025 Contract Value : ₹ 9.43 Lakh
Government Departments No of Bidders 1
Punjab View Result →
32.
Housing Urban and Rular Development #7886465 AOC
Providing Fitting Fixing Installation Testing Commissioning Of Electric Crematorium At Ranirbazar Cremation Ground West Tripura Inc Self Supporting Chimney Construction Of Base Of Chimney By Cc Others Necessary Allied Equipments-Providing & Fitting fixing of furnace casing, double wall type fabricated from finest steel, duly painted with heat resistant aluminium paint or powder coating etc.( 75 mm MS Channel or square tube in double wall frame and SS 304 decorative sheet) complete as per direction of the Engineer-in-Charge 2 Providing & Fitting fixing of Refractory & insulation for furnace lining with necessary cement ceramic fibre insulation and calcium silicate board for insulation of furnace etc. (Refractory with 42% to 63% high alumina high seal block for insulation, ceramicBlanket, hot & cold phase bricks and bider ) complete as per direction of the Engineer- in-Charge 3 Providing & Fitting fixing of Motorised Door made of MS with internal insulation with ceramicBlanket, & allied equipment Motorised Door drive arrangement including 0.5 HP motor, gearbox, chain, sprocket, counterweight, limit switch & clutch arrangement & arrangementof manual operationetc. complete as per direction of the Engineer–in-Charge 4 Providing & Fitting fixing of stainless steel vertical wet scrubberalong with water recirculation pump water tank duly lined with FRP piping, (ventury scrubber to control air pollution with capacity 150 mg/hr, 3mmthickness AISI SS304 plate, spray nozzle, mist separator and damper etc. complete as perdirection of the Engineer- in-Charge 5 Providing & Fitting fixing of stainless steel ducting from furnace to scrubber and scrubber to chimney of SS 304 of dia 300/322 mm with necessary flanges dampers and SS hardware etc. complete as per direction of the Engineer–in-Charge. 6 Providing & Fitting fixing offresh air arrangement including Blower centrifugal typewith minimum 1 HP motor, 600 CFM discharge capacity ,Distribution chamber, necessary Valves etc. complete as perdirection of the Engineer- in-Charge. 7 Providing & Fitting fixing oftrolley with electro mechanical operation along with facility of automatic UP down and reverse 7 forward for smooth charging of body inside furnace along with its rails and accessories etc. complete as perdirection of the Engineer- in-Charge. 8 Providing & Fitting fixing of Vertical heaters bundled with rod type made of 80-20 Ni-Cr / Cr wire with protected by APM Radiant Tube etc. complete as perdirection of the Engineer- in- Charge. 9 Providing & Fitting fixing of Electrical controlPanel with 14 swg sheet metal enclosure painted with anti corrosive paint in/c thruster power regulator with PID temperature controller with contactor with change over switch and also necessary cables, Electrical devices etc. complete as perdirection of the Engineer –in-Charge. 10 Providing & Fitting fixing of Cables from source to controlPanel& Control panel to furnace and others motors, Earthing with all earthing materials etc. complete as perdirection of the Engineer- in- Charge. 11 Providing & Fitting fixing of MS fabricated Water Tank Size of 1375 (H) X 1500 (L) x 1000(W) with FRP coating in /cnecessaryinlet /outlet pipeline & valves etc. complete as perdirection of the Engineer- in -Charge. 12 Providing & Fitting fixing of Foot mounted exhaust blowerin SS 304 with 10 Hp motor in/c damper, centrifugal type1200 CFM discharge capacity etc. complete as perdirection of the Engineer- in-Charge. 13 Providing & Fitting fixing of 2 HP slug Pump (Crompton/ Kirloskar make) with necessary pipe, pipe fittings, flange etc. complete as perdirection of the Engineer- in- Charge. 14 Providing & Fitting fixing of 30 mtr. self supporting chimney along with ladder & platform upto sampling point, Aviationlamp, and lightning arrestor, Chimney should include earthing provision and foundation bolts nut of adequate size etc. complete as perdirection of the Engineer- in- Charge. 15 Construction of Chimney foundation 2600 mm x 2600 mm x 2000 mm, R-25 grade RCC TMT 10 to 16 mm dia. in/c fitting fixing of stud bolts of chimney with accurate measurement as per manufacturer design & drawing complete as perdirection of the Engineer- in- Charge. 16 Providing, Installation & commissioning of 125 KVA Generator with diesel driven engine, Kirloskar/ Cummins make complete as per direction of the Engineer- in- Charge
Contract Date: Aug 30, 2025 Contract Value : ₹ 78.40 Lakh
Government Departments No of Bidders 1
Tripura View Result →
33.
Railways #7786752 AOC
Supply Of Electro Hydraulic Thruster For Eot Crane, Type: Et-240, Capacity: 18 Kg, 3 Phase, 415 V, 0.3 Amp, Salient Feature: Consist Of Hydraulic Oil Tank, Electric Motor, Impeller, Thrust Rod And Oil Seal. Make: Rolex Or Speed-O-Control Or Speeedage Or Speedotechelectro Hydraulic Thruster For Eot Crane, Type: Et-240, Capacity: 18 Kg, 3 Phase, 415 V, 0.3 Amp, Salient Feature: Consist Of Hydraulic Oil Tank, Electric Motor, Impeller, Thrust Rod And Oil Seal. Make: Rolex Or Speed-O-Control Or Speeedage Or Speedotech,Electro Hydraulic Thruster For Eot Crane, Type: Et-240, Capacity: 18 Kg, 3 Phase, 415 V, 0.3 A Mp, Salient Feature: Consist Of Hydraulic Oil Tank, Electric Motor, Impeller, Thrust Rod And Oil Seal. Make: Role X Or Speed-O-Control Or Speeedage Or Speedotech [ Warranty Period: 30 Months After The Date Of Deliver Y ] ]
Contract Date: Jul 17, 2025 Contract Value : ₹ 59,472
Government Departments No of Bidders 1
Odisha View Result →
34.
Defence #6886994 AOC
Provision Of Stfe Manufacturing Facility In Drdo Land Near Batl Complex At Thiruvananthapuram; SUBHEAD-I :Dismanteling Works , Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) , Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. , Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 10km initial lead, for all leads including all lifts involved. , Credit for Reinforcement steel obtained form above items , SUBHEAD-II :EARTH WORK & EXCAVATION : , Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. including pumping out water as required or liquid mud, , All kinds of Soils , Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. . including pumping out water as required or liquid mud, , All kinds of Soils , Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. , Supply,Laying, spreading and compacting stone aggregate of specified sizes to Rubble solling specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . , SUBHEAD-III :ANTI TERMITE TREATMENT : , Supplying chemical emulsion in sealed containers including delivery as specified. , Chlorpyriphos/ Lindane emulsifiable concentrate of 20% , Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : a) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:With Chlorpyriphos/ Lindane E.C. 15% with 1% concentration. , Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 15% with 1% concentration. , SUBHEAD-IV:PLAIN & REINFORCED CEMENT CONCRETE : , Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : , 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) , Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: , 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. , Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. , Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement , Concrete of M25 grade with minimum cement content of 330 kg /cum , All works upto plinth level , All works above plinth level upto floor v level , Concrete of M25 grade with minimum cement content of 330 kg /cum , All works above plinth level upto floor v level , Add/ Deduct for using extra/ less cement in the items of design mix over and above the specified cement content therein. , Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). 450 mm dia piles , Supplying, fabricating and fixing in position reinforcement bars at all levels and positions including the cost of steel, straightening, cutting, bending, binding and placing in position etc., as per drawings and specifications including the cost of binding wire, labour etc., all complete for reinforced concrete. , Thermo-Mechanically Treated bars (Fe 500 Grade or More) at all levels , Centering and shuttering including strutting, propping etc. and removal of form for : , Foundations, footings, bases of columns, etc. for mass concrete , Lintels, beams, plinth beams, girders, bressumers and cantilevers , Columns, Pillars, Piers, Abutments, Posts and Struts , Weather shade, Chajjas, corbels etc., including edges , Suspended floors, roofs, landings, balconies and access platform , Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. , Stairs, (excluding landings) except spiral-staircases , Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). , Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) , Vertical load testing of piles in accordingwith IS 2911(Part IV) including installation of loading plateform and Preparation of pile head or construction of test cap and dismantling of test cap arter test etc., complete as per specification & the direction of Engineer-in-charge Single pile upto 50 tonne safe capacity Routine test , SUBHEAD-V : STONE & BRICK MASONRY : , Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with, Cement mortar 1:6 (1 cement : 6 coarse sand). , Providing and laying autoclaved aerated cement blocks masonry with 150mm/200mm/230/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). , Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. , SUBHEAD-VI :PLASTERING & SURFACE TREATMENT : , Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : , Flush/ Ruled Pointing , 6 mm cement plaster of mix cement mortar 1:3 (1 Cement : 3 fine sand). , 12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand). , 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand). , 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). , Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. , Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. , Providing and fixing 22 gauge chicken mesh wire at the junction of RCC and brick work with overlapping of 100mm on both sides, etc., complete. , White washing with lime to give an even shade: New work (three or more coats) , Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour (Two or more coats on new work) complete, as per manufacturer’s specification. , Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm , Applying priming coat , With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) , With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works. , Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on new work , French spirit polishing : Two or more coats on new works including a coat of wood filler. , SUBHEAD-VII :FLOORING : , Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). , Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement. , Making provision for contraction, expansion, construction and longitudinal joints (size 5x20mm) by groove cutting machine. , Providing and filling in position at expansion joints(size 5x20mm) with poly sulphate sealants of approved brand. , Supply and application of SealArm Tape TPE with adhesive ReArm Bond 4031 for 25mm width expansion joint. Work includes Insert backer rod same or higher dia into the joint and Apply of epoxy adhesiveReArm Bond 4031 first on the flanges of the joint followed by laying tape and press it on the adhesive. Again apply second layer of ReArm Bond 4031 on the tape (sandwiching the tape with adhesive both on top and bottom). Work including surface preparation all incl etc, not incl of joint protection works. Supply and apply of polyurethane sealant to expansion joint. work includes Insert backer rod of same or higher dia into the joint and apply polyurethane sealant - SealArm PU. Ensure that depth of sealant filling is atleast 1/2 of the width of joint as minimum criteria. , Providing and placing the 2.0mm thick and 300mm width aluminium plate as a protection for the tape. , Supplying & Fixing in position of pre-moulded, high performance joint filler board of 25mm thickness in expansion joints in Concrete, brick work, block work or isolation joints and should be rot free and with no bitumen content (ShaliTex Expansion Joint Filler Board of M/s Shalimar Tar Products or equivalent) , 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc., complete. , Providing cement skirting in CM (1:3) 18mm thick finished with a floating coat of neat cementetc., complete. , Supplying and applying Epoxy Flooring System as per the following Specification: Surface Preparation:- Providing and cleaning all floor area to make it free from dirt, dust and other contaminants, making grooves etc .as per manufacturers specification. Priming:- FloArm Primer 1260is a two-component solvent free, low viscous epoxy resin primer for both horizontal & vertical applications. It may also be used for producing leveling and scratch coats for surface preparation prior to final flooring. Epoxy Screed- FloArm ESF 2-M consists of graded aggregates bound is a epoxy resin binder. It is supplied as a 3component system, pre-weighed for on-site mixing. When laid it provides a smooth surface. FloArm ESF 2 M is designed for use in industrial environments where high abrasion and impact loads are likely. It provides a dense, impervious, coloured and chemically resistant floor surface which is hygienic and easy to clean. The designated floor area shall be surfaced FloArm ESF-2 a Heavy duty, trowel applied flowable 2-3 mm thick epoxy resin floor topping. The topping shall achieve a compressive strength of >50N/mm² and a flexural strength of >20 N/mm² at 7 days. , Epoxy Top Coat- FloArm SL-2 M consists of graded aggregates bound in a pigmented epoxy resin binder. It is supplied as a four component system, pre-weighed for on-site mixing. When laid it provides a smooth, light reflective surface. It is available in a range of standard colours. FloArm SL-2 Mis designed for use in industrial environments where high abrasion and impact loads are likely. It provides a dense, impervious, coloured and chemically resistant floor surface which is hygienic and easy to clean. The designated floor area shall be surfaced FloArm FloArm SL-2 M a Heavy duty, trowel applied flowable 2 mm thick epoxy resin floor topping. The topping shall achieve a compressive strength of >50N/mm² and a flexural strength of >25 N/mm² at 7 days. Make of Epoxy Flooring :- MYK or as Approved by Chief Construction Engineer (R&D)South. , Anti Static Flooring Surface preparation:- Providing and cleaning all floor surface including wall up to required height to make it free from dirt, dust, loose particles, wax, polish, efflorescence, laitance, curing compound and other contaminants by using wire brush, grinding all sharp edges to make it flush with the surface etc and complete as per manufacturers specification. , Priming:- Prepared substrates to be treated with FloArm SL Conductive system should be primed with FloArm Primer EP. FloArm Primer EP should be mixed in the proportions supplied by adding the entire contents of hardener can to the base can. Once mixed the FloArm Primer EP, should be immediately applied in a thin, continuous filmusing stiff brushes or rollers. Over application and puddles should be avoided. Porous floors may require two coats of FloArm Primer EP. FloArm Primer EP should be allowed to become tack free (over night Air dry) prior to application of Copper tape and subsequent FloArm SL Conductive Undercoat. Copper tape Fixing: - Make a suitable pattern to lay the copper strips of Copper band in a 5/5 m grid. , Screed:FloArm Cempo4 is a three part; epoxy modified cementitious, fine textured mortar for self-smoothing floors creeds in thinlayers of 4mm , Applying undercoat: The mixed undercoat shall be applied with a roller or brush on the primer at a material consumption rate of 6m²/kg for FloArm SL Conductive under coat. Care shouldbe taken to avoid over application or puddles. Theundercoat provides a Conductive system passagetoearth so correct application and strict adherence tocoverage rates are critical to the final electrical propertiesof the completed floor. Adequate ventilation and air movement are necessary for complete curing of undercoat. Thorough covering of earthing connections isessential. The Resistivity of the undercoat needs to bemeasured before applying the top coat (after overnight Air Dry). the surface resistance (FloArm SL Conductiveundercoat) should be: approx. 3x103- 9 x103 Ohm , Applying Topcoat: When mixed, FloArm SL Conductive Topcoat should bepoured immediately on to the surface and spread @2mmwith a steel trowel or a float. Immediately after applicationthe surface should be firmly rolled in perpendicular directions with a nylon spiked roller to help release anyentrapped air in the material and help to spread any slight trowel marks. Make of Anti Static Flooring :-MYK or as Approved by Chief Construction Engineer (R&D)South. , Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. , Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. , Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm , Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. , Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. , Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red , SUBHEAD-VIII :STEEL & WOOD WORKS : , Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete , Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc. , Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including MS pressed blet hinges 2.50mm thick with morter guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: , Profile B, fixing with adjustable lugs with split end tail to each jamb , Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: , 35 mm thick , Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. , Providing and fixing to existing door frames, 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. , Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). , Providing and fixing the following hardware fittings of approved make: , 200mm long SS Tower Bolts , SS Aldrop 300mm long , Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. , 125mm long , Providing and fixing aluminium hanging floor door stopper (Single rubber stopper), ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. , Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. , Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. , Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). , Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron)work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws.(Glazing, paneling and dash fasteners to be paid for separately) : , For sliding windows & ventilators including the cost in-built roller track, uPVC extruded interlocks, EPDM rubber,wool pile, zinc alloy ( powder coated) touch locks with hook, zinc alloy body with single nylon rollers (required weight bearing capacity ),neoprene gasket, G.I fasteners riquired size for fixing frame to finished wall and necessary stainless steel screws etc all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazingand paneling to be paid for separately, Only weight of aluminium sections to be measured for payment). , Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : , For fixed portion , Powder coated aluminium (minimum thickness of powder coating 50 micron) , For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) , Powder coated aluminium (minimum thickness of powder coating 50 micron) , Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): , With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) , Providing and fixing Motorised Sliding Door of size 6 x 8 mCE Certified As Per European Standard BS EN 13241-1:2003+A1:2011 Single Side 0.50 mm thick GI Cladding Sheet Both Side Automation System : Bottom Drive Inbuilt wicket door with, locking arrangement & auto sensor - (w)1000 x (h)2100 mm Enamel Paint including all necessary fittings,hardwares etc complete as directed engineer in charge. , Providing and fixing Motorised Sliding Door CE Certified As Per European Standard BS EN 13241-1:2003+A1:2011 Single Side 0.50 mm thick GI Cladding Sheet Both Side Automation System : Bottom Drive Enamel Paint including all necessary fittings, hardwares etc complete as directed engineer in charge. , D1 ( 3.5 x 2.1) , D2 (2.5 x 2.1) , Providing and fixing Motorised GI Rolling Shutter CE Certified As Per European Standard EN 13241-1:2003+A1:2011 GI Slat Box Type Guide Powder Coated Motorised System : Indirect Drive With Std. Control Push Button - 1 No. Hood Cover - R/Meter including all necessary fittings,hardwares etccomplete as directed engineer in charge. , RS1 (4 x 3) , RS2 (3 x 3) , Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 -part 1 and M.S. top cover of required thickness for rolling shutters. , 80x1.25 mm M.S. laths with 1.25 mm thick top cover , Providing and fixing ball bearing for rolling shutters , STRUCTURAL STEEL : , Analysis, Design, Engineering, Preparation of Detailed Drawings, MAnufacturing, Fabrication, Supply, Loading,Transporting to SIte, Unloading, Erection of Steel PEB(Pre-Engineered Building)System, Consisting ofMS Platesof 345MPayield strength and Coating Thickness of 275gsm forcolumns, jack trusses, crane beams, Platforms, canopies, lattice girders, rafter , sub rafters ,at all elevations, levels and heights including aligning, leveling, providing and fixing bolts, nuts, washers, comprising MS angles, chann`els, joists, rails, tees, plates, rounds, squares,etc., of various sizes and other structural steel sections conforming to latest IS CODE including straightening, cutting, welding, bending to shape, bolting,and inclusive ofGrit / sand blasting and applying two coats ofSynthetic Enamel paint over one coats of approved Zinc Chromate primer . , The rate to include the cost of all materials, labours, tools, tackles, cranes, devices and plants, bolts, nuts, washers, clamps, welding electrodes and connection required for work, shims and packing pieces, any cutting, fabrication work required on electrically operated machines in the work shop including transportation to site and erection as per specifications and drawing complete. , a) For trusses , Rafters, gable frame ,lattice girders, Jack Beam, Crane beams, Columns.etc at all heights. , Supplying, fabricating, hoisting and erecting in position Purlins , cladding runners, girts of minium 345mpa yeild strength at all elevations, levels and heights including aligning, leveling, providing and fixing bolts, nuts, washers, comprising MS angles, channels, joists, rails, tees, plates, rounds, squares etc.,of various sizesincluding straightening, cutting, welding, bending to shape, bolting,Acid Pickling / GALVANISING of minium 120gsm &inclusive of following finishes. structural Grit blasting and applying two coats ofSynthetic Enamel paint over one coat of Zinc Chromate primerofapproved make and colouras per specifications and drawing complete. , Providing and fixing in position GI High Strength Foundation Bolts of approved make ofwith nuts of various diameters and lengths confirming with IS 4000-1992, Class 8.8 Type I for joining of various Structural components like Column, Rafters, Jack Beams,etc., including work at all levels and locations complete all as shown in the drawing , Roof Sheeting TOP SHEET : Supply of 360-degree FORTISS™ 470 standing seam panels shall be 470mm effective cover width, 73mm rib height, with strengthening rib/ flute in the pan for strength. The end lap shall be seamed with 360 degree seeming using Seamer machine. The sheeting material shall be 0.50 mm Base Metal Thickness (BMT), (0.55mm TCT, 0.58mm TPT). The steel sheet is having high tensile strength G300 (Fy=300Mpa), metallic coated with Zinc-Aluminium alloy (i.e. 55% Al, 43.4% Zinc, 1.6% Si - Zincalume), AZ150 (min 150 g/m2 total on both side), pre-painted with NextGen COLORBOND® XRW. The sheet conforms to general requirement of AS/NZS 2728 type 4 / IS 15965 class 3 durability of Tata BlueScope Steel make. The sheet shall be IGBC Green pro, Griha, EPD certified and steel sheet shall have brand marking of coated steel manufacturer (product details, date, mfg. name, etc.) on back side at regular interval confirming genuinity of the material. , ROOF INSULATION: Insulation shall be 50mm thick, density 48kg/m3 Rockwool with or without facing as per design requirement complying with IS8183 BS - 3958 Part-5. ASTM C592-80, as approved by engineer in-charge shall be laid uniformed over Purlin. SUB GIRTS: LYSAGHT ZED-plus™ purlins and Girts 1.5mm thick high strength galvanized steel with min 345 MPa yield strength, zinc coating of Z275 (275 g/m2 minimum coating mass) confirms to IS 277 / IS 15961 pre-punched to the required dimensions, suitable for roof and wall cladding support and portal framing up to a certain span. The design of cold formed ZED-plus purlins sections shall be subject to the requirement of IS 801 / AISI 1996, cold formed steel structures code. LINER - Bottom Sheet : Pre-painted Zincalume trapezoidal sheets shall be made of 0.45mm BMT (0.50mm TCT, 0.53mm TPT), G550 (min 550 yield strength), 1015mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg of Lysaght Trimdek. Color : COLORBOND XRW Standard or as Approved by Chief Construction Engineer (R&D)South. Make of Sheeting :-Tata Blue Scope or as Approved by Chief Construction Engineer (R&D)South. , Wall Panelling OUTER SHEET : Pre-painted Zincalume trapezoidal sheets shall be made of 0.45mm BMT (0.50mm TCT, 0.53mm TPT), G550 (min 550 yield strength), 1015mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg of Lysaght Trimdek. Steel should be metallic coated with Zinc-Aluminium alloy (i.e., 55% Al, 43.4% Zinc, 1.6% Si - Zincalume), AZ150 (min 150 g/m2 total on both side), pre-painted with NextGen COLORBOND® XRW. The sheet conforms to general requirement of AS/NZS 2728 type 4 / IS 15965 class 3 durability of Tata BlueScope Steel make. The sheet shall be IGBC Green pro, Griha, EPD certified and steel sheet shall have brand marking of coated steel manufacturer (product details, date, mfg. name, etc.) on back side at regular interval confirming genuinity of the material. , Wall INSULATION: Insulation shall be 50mm thick, density 48kg/m3 Rockwool with or without facing as per design requirement complying with IS8183 BS - 3958 Part-5. ASTM C592-80, as approved by engineer in-charge shall be laid uniformed over Purlin. SUB GIRTS: LYSAGHT ZED-plus™ purlins and Girts 1.5mm thick high strength galvanized steel with min 345 MPa yield strength, zinc coating of Z275 (275 g/m2 minimum coating mass) confirms to IS 277 / IS 15961 pre-punched to the required dimensions, suitable for roof and wall cladding support and portal framing up to a certain span. The design of cold formed ZED-plus purlins sections shall be subject to the requirement of IS 801 / AISI 1996, cold formed steel structures code. LINER - INNER Sheet : Pre-painted Zincalume trapezoidal sheets shall be made of 0.45mm BMT (0.50mm TCT, 0.53mm TPT), G550 (min 550 yield strength), 1015mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg of Lysaght Trimdek. Color : COLORBOND XRW Standard or as Approved by Chief Construction Engineer (R&D)South. Make of Wall Panelling :-Tata Blue Scope or as Approved by Chief Construction Engineer (R&D)South. , Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. , Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. , 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. , Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, , shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : , 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) , Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). , SUBHEAD- IX : MISCELLANEOUS: , Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: , a) Applying a slurry coat of neat cement using 2.75 kg/Sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. , b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. , c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ Sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. , d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3 mm deep. , e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.All above operations to be done in order and as directed and specified by the Engineer-in-Charge, with average thickness of 120 mm and minimum thickness at khurra as 65 mm. , Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. , Single socketed pipes of 110mm diameter , Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. , 110mm Bend 87.5° , 110mm Shoe (Plain) , Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. , 110mm , Providing and fixing Duraborad HD100(Formely Known as Capcell HD100/Silflex) The most Compressible Filler boad for expansion joint with Density of 100kg/cum.in 100mm Thickness , SUBHEAD-X : SANITARY SERVICES: , Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : , White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. , Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : , W.C. pan with ISI marked white solid plastic seat and lid. , Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc., including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. , Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. , Providing and fixing white vitreous china flat back urinal basin of 430x260x350 mm size. , Providing and fixing C.P 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes, weighing not less than 60 gms. , Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : , White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. , Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. , Providing and fixing toilet paper holder, C.P. Brass. , Supply and fixing of 15 mm CP Health faucet Cum bib tap with 1.25 mts long tube with end nuts and hook and 1 no 15 mm CP brass angular stop cock with wall flange, Hook to be fixed with CP brass with suitable counter sunk screws, all of approved make etc., complete. , Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. , Granite of any colour and shade. , Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc., complete as per design approved by Engineer-in-Charge. , Granite Work , Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc., including moulding, rubbing and polishing of cut edges etc. complete. , Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. , Granite Stone of approved shade , Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. , 32mmdia Flexible pipe , Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. , Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , Providing, fixing, testing and commissioning of 75 mm pipe diameter uPVC SWR Type B pipe comforming to IS : 13592, including jointing with seal ring conforming to IS : 5382 for vertical pipe & Selfit uPVC Adhesive solvent joint inside in the toilet, including all fittings such as bends, junctions, inspection doors, offests, cowl, clean out, access pieces/plugs etc. complete the job. The rate shall be including all the engineered support at every one Meter (support, hanger, nuts/ bolts, anchor fasteners, fixing clamp/channels with U-bolts, etc) as per detail technical specification etc. complete the job. , 100mm dia upvc/ SWR Single socket , 75mm dia UPVC/SWR Single socket , Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete for UPVC SWG Pipes conform to is 13592-1992. , 100mm dia UPVC/SWR Single socket , 75mm dia UPVC/SWR Single socket , Providing and fixing PVC door bends as per IS - 13592-1992 single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. , 100x100x100 mm , 75x75x75 mm , Providing and fixing terminal guard, Sand cast iron S&S as per IS - 3989. , 100mm dia. , 75mm dia. , Providing and fixing M.S. stays and clamps for pvc pipes of diameter. , 100mm , 75mm , Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors, Sand cast iron S&S as per IS: 3989. , 100 mm inlet and 100 mm outlet , Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : , 100mm dia. , 75 mm dia , Supply and fixing in position best quality and approved make CP brass coat hooks with flanges fixed to wall/door shutters with necessary screws washers etc., complete. , SUBHEAD-XI :WATER SUPPLY SERVICES: , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. - External Work. , 25 mm dia nominal bore , 32 mm dia nominal bore , 40 mm dia nominal bore , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc., , 15 mm dia nominal bore , 20 mm dia nominal bore , Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : , 25 mm dia nominal bore , 32 mm dia nominal bore , 40 mm dia nominal bore , Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. , Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : , 25 mm nominal bore , Providing and fixing CP brass bib cock of approved quality : , 15 mm nominal bore , Providing and fixing CP brass stop cock of approved quality : , 15 mm nominal bore , Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. , 15 mm nominal bore , Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. , SUBHEAD-XII : INTERNAL ELECTRIFICATION : , Point Wiring for Light/ Fan/ exhaust fan with 2 runs of 1100V grade 1.5 Sq.mm & 1 run of1.5 Sq.mm PVC insulated multistrand , FRLS , Copper conductorwires , run in and including 25mm dia heavy gauge PVC conduits concealed in wall / ceiling conforming to IS732 including all accessories such as junction boxes, conduit bends elbowsand anodised GI Switch box with modular switch and the box coveredwith front plate including connections to Earth terminal. , One Light point controlled by one 6 Aswitch. , Two Light point controlled by one 6 Aswitch. , Three Light point controlled by one 6 Aswitch. , Four Light point controlled by one 6 Aswitch. , Ceiling fan point controlled by one 6 A switchand electronic fan regulatorof 100 W step typewith concealed MS fan hook box. , Exhaust fanpoint controlled by one 6 A switch. , Point Wiring for Light/ Fan/ exhaust fan with 2 runs of 1100V grade 1.5 Sq.mm & 1 run of1.5 Sq.mm PVC insulated multistrand , FRLS , Copper conductorwires , run in and including 25mm dia, 14SWG black enameledMS conduits surface / concealed in wall / ceiling conforming to IS732 including all accessories such as junction boxes, conduit bends elbowsand anodised GI Switch box with modular switch and the box coveredwith stainless steel front plate including connections to Earth terminal. , One Light point controlled by one 6 Aswitch. , Two Light point controlled by one 6 Aswitch. , Three Light point controlled by one 6 Aswitch. , Four Light point controlled by one 6 Aswitch. , Point Wiring for Light/ Fan/ exhaust fan with 2 runs of 1100V grade 2.5 Sq.mm & 1 run of2.5 Sq.mm PVC insulated multistrand , FRLS , Copper conductorwires , run in and including 25mm dia , 14 SWG black enameledMS conduits surface / concealed in wall / ceiling conforming to IS732 including all accessories such as junction boxes, conduit bends elbows etc including connections to Earth terminal. , One Light point controlled by one 6A SP MCB , Two Light point controlled by one 6A SP MCB , Three Light point controlled by one 6 ASP MCB . , Four Light point controlled by one 6 ASP MCB , Point Wiring for Light/ Fan/ exhaust fan with2runs of 1100V grade 1.5 Sq.mm & 1 run of1.5 Sq.mm FRLS insulated multistranded Copper wires, run in & including 25mm dia, 14 SWGMS conduitssurface / concealed in Slab/ wall after necessary chase cutting with finishing/surface in wall / ceiling conforming to IS 732 including all accessories such as junction boxes, conduit bends, elbows and ceiling rose, anodised GI Switch box withmodular switch and the box coveredwith front plate and alsoincluding connections to Earth terminal. , One Light point controlled by one 6A Switch , Two Lights point controlled by one 6A switch. , Three Lights point controlled by one 6A switch. , Four Lights point controlled by one 6A switch. , Supply and laying of 25mm dia, 16 SWG black enamelled M.S. conduit concealed in wall/ ceiling/ floor including all accessories such as junction boxes, conduit bends, etc., complete as required for Telephone etc., , Supply and laying of 32mm dia, 16 SWG black enamelled M.S. conduit concealed in wall/ ceiling/ floor including all accessories such as junction boxes, conduit bends, etc., complete as required for Telephone etc., , Supply and fixing of 6A, 3Pin Socket outlet with 6Aswitch in Lighting switch boards. (Dependant). , Supply and fixing of 6A, 3Pin Socket outlet with switch of 6A ratingwith wiring of 2 Runs of 2.5 Sqmm and1 Run of 2.5 Sqmm FRLS, PVC insulatedmultistranded Copper conductorwires run inand including 25 mm Dia, 2 mm thick PVC conduit. (Independant). , Supplying and fixing suitable size GI box with modular Stainless Steelplate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in Clean Room). , Supply and Wiring with the following size 1100V grade PVC insulated multistrandFRLSCopper conductor wires inand including suitable size heavy gauge PVC conduit concealed in wall / Ceiling including all accessories suchas junction boxes, bends, elbows including end terminated with suitable lugs. , 2 runs of 2.5 Sq.mm wires with 1run of 2.5 Sq.mm wire in and including25 mm Dia PVC Conduit (For Lighting Circuit) , 4 runs of 6 Sq.mm wires with 2 runS of 6 Sq.mm wiresin and including32 mm Dia PVC Conduit (For Lighting Sub Mains) , Supply and Commissioning of thefollowing type Fluorescent/ Compact fluorescentlight fixtures on wall/ Ceiling including all fixing accesssories such as leads, etc complete as required. The Fluorescent/CFL fixtures shall be complete with Low loss copper ballast PF improvement capacitor, Bipin Rotor type lamp holder,starter, starter base, all prewired upto the terminal block. All fixtures shall besupplied with lamps. The Catalogue Numbers refers to Philips Make. , 36 W Surface mounted LED 4 Feet LengthLuminaire , (Philips : BN308C LED40S-6500 L120 PSU WH/or Equivalent as per approved makes) , 1 x12 WSurface MountedLED Luminaire , (PhilipsCat No : SM250C LED 12S-6500PSU WH or Equivalent as per approved makes) , 40 WRecessMountedLEDLight Fixture , (PhilipsCat No :RC 380 B LED 40S-6500 G4L60W60 PSU OD/Equivalent as per approved makes) , 20W Recess mounted DownLight Fixture , (PhilipsCat No DN296B LED20S-6500 PSU WH S2/Equivalent as per approved makes) , 36W Surfacemounted SquareLight Fixture , (PhilipsCat No SM36S -6500 G6L54W54PSU OD/Equivalent as per approved makes) , 40 W Bulk Head Light Fixture Indoor , (PhilipsCat No WT 202W LED 10S CW PSU S3 PC/Equivalent as per approved makes) , 210WLED High Bay Light Fixture , (PhilipsCat No BY616P LED200S 5700 WB PSU GR/Equivalent as per approved makes) , 104WLED High Bay Light Fixture , (PhilipsCat No BY225P LED104S CW SYWB PSU FG GR V2/Equivalent as per approved makes) , 36WLED2 X 2 Top openable cleanroom Light Fixtures , (PhilipsCat No CR652B LED36S-6500 PSU CA BO W30L120 WH /Equivalent as per approved makes) , Supply and Installation Testing and Commisioning of 1200 mmsweep single phase Ceilingfan including fixing accessories etc., complete.( BEE 5 star rated ceiling fan ) , Supply and Installation Testing and Commisioning of 600 mm dia sweep single phase wall mounted fan including fixing accessories etc., complete. , Supply and Installation Testing and Commisioning of 600 mm dia Air circulator single phase wall mounted with metal blades including fixing accessories etc., complete. , Supply and commissioningof305 mm sweep Exhaust fans with Metallic blades and MS gravity louversincluding all accessories / Installation materials required. , Installtionof Fluorescent/ Compact fluorescentlight fixtures on wall/ Ceiling including all fixing accesssories such as leads, etc complete as required. , Installation of 1200 mm sweepwhite colour Ceiling fan with standard down rod(600mm length down rod in false ceiling areas) andall accessoriesas required etc complete. , Installationof305 mm sweep Exhaust fans with Metallic blades and MS gravity louversincluding all accessories / Installation materials as required. , Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required. (But without MCB/RCCB/Isolator) , 8 way (8 + 24), Double door , 4 way (8 + 12), Double door , Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuitbreaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. , 40A , Supplying and fixingof 6A to 32A rating 240/415V,10kA , C Curveminiature circuit breaker suitable for inductive load of following polesin the existing MCB DB complete with connections ,testing and commissioning etc complete. , Single Pole , Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required. (But without MCB/RCCB/Isolator) , 8 way (4 + 24), Double door , Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, molded case circuitbreaker (MCCB), having a breaking capacity 25 KA in the existing MCB DB complete with connections, testing and commissioning etc. as required. , 160A 4P MCCB, 25 kA , Supplying and fixingof following rating 240/415V,10kA , C Curveminiature circuit breaker suitable for inductive load of following polesin the existing MCB DB complete with connections ,testing and commissioning etc complete. , 40A Three Pole MCB 10 kA , SUBHEAD-XIII : AIR CONDITION: , HVAC SYSTEM , All works should include Supply, Lifting, Shifting, Positioning, Installation, Testing, commissioning & handing over , All the equipments shall be five star rated only , All Techincal data sheet & drawing shall be submitted and get approved by department before supply , All equipment factory inspection shall be carried out by department , First prefers as per BOQ followed by Techincal specification , VARIABLE REFRIGERANT FLOW (VRF) / VARIABLE REFRIGERANT VOLUME (VRV) , Supply, Installation, Testing & Commissioning & Handing over of the following: , HIGH SIDE VRF/VRV EQUIPMENT , VRF/VRV HI BRID AIR-CONDITIONING EQUIPMENTS: (100% INVERTER TYPE ONLY TO BE QUOTED) - R410A Refrigerant , Supply, Lifting, Shifting, Positioning, Installation, Testing, commissioning & handing over of VRV/VRF air conditioning systemunit suitable for cooling and heatingmode having all hermetically sealed inverted type screw compressor with 5 Star and above Rating as per OEM comprising of Modular type high efficiency Twin Rotary MultipleCompressor with inverter, High efficiency heat transfer Cooling Coil suitable for Environment friendly R410a refrigerant,Air cooled propeller type condenser fan with DC motor drive,interconnecting piping, suction line insulation etc., Micro-processor control panel suitable for automatic operation,High speed calculation inverter control, active oil control mechanism incorporating all safety functions as per equipment specifications & other points as listed below: , The unit mounted starter panel shall be complete with IP-65 protection consisting of power disconnecting switches with fuses, soft starters, for compressor motors, under/over voltage trip, single phase preventers, communication card which can accept 4-20 mA or 2-10 Vdc analog signal. , All components shall be mounted on welded steel base frame, structural steel profiles/panels made out of galvanized sheet steel, protected with primary coat & finished with epoxy paint. , Modular type outdoor units equipped with highly efficient scroll compressors, withinvertertype compressor(s),special acryl precoated heat exchanger,low noise condenser fan,auto check function for connection error, auto address & UNIT Price shall be inclusive of outdoor stand price. Shifting & Installing of ODU as per shop drawing is part VRV vendor scope.(ODU Location & Capacity mentioned below). Shifting of Out door units from GF to repective location is part of VRF vendor scope . ODUs shall have service valve station for easy operations and monitoring of system , All VRV units should be compatible for third party BMS integration .necessary integrator should be consider in part HVAC VRF/VRV vendor scope (Bacnet over MSTP protocol to be considered for BMS compatibility requirement). Centralized controller shall be considered combined for all the VRF/VRV indoor and outdoor units and same to be located in a specific location as per client requirement. , Supply & providing of MS stand for VRF/VRV ODU along with proper supports-suitable for above configuration , Installation and pressure testing with nitrogen Gas, Vaccumising including all consumables for all system shall be part of scope of supply (Pre commissioning ) , First Filling, testing, commissioningincluding topping up of R410 A Refrigerant Gas. , Factory acceptance test to be conducted for all the units and cost of the same to be included , Testing tools and instruments of approved make and required quantity tobe maintained by Contractor , Contractor shall engage dedicated commissioning manager for project and shall coordinate for all testing activities and documentations , Central remote controller should be considered and provided along with VRF/VRV units , With all necessary accessories including vibration insolation i.e fixing etc complete. , Lifting, shifting and positioning of VRF/VRV System as per design location , Outdoor unit suibtable for both cooling & heatingmode having all hermetically sealed inverted typescroll compressor, minimum two compressors for above 14hP Modules, microprocessor based controller. , The unit shall be delived the rate capacity at AHRI conditions and work even at 50c ambient temperature with out tripping , The COP at AHRI conditions shall not be less than3.1 and IEER not less than 6.5.The motor shall be by IEE3 Rated , (*Note:The cost includes themaintenancegranttee includes 24months from the date ofCommissioning without any additional cost) MAKE: Daikin, Blue star, Voltas, Carrier, Trane. , Outdoor Unit (ODU) : Cooling Capacity : 218HP (OFFICE, LAB & QC LAB) , Outdoor Unit (ODU) : Cooling Capacity : 65HP (CLEAN ROOM) , Outdoor Unit (ODU) : Cooling Capacity : 220HP (WORK SHOP) , INDOOR UNITS , Indoor Unit (IDU):Coolingtype All the units should be supplied with thermostat control. The following Indoor unit capacities are required for each type of Room including heating & cooling mode. considered for Auto change over,failure status,overload sequencing etc. Along with proper supports-suitable for above configuration With all necessary accessories i.e fixing etc complete. , It should be suitable for BMS connectivity with necessary accessories. , 4-WAY CASSETTE UNIT , Four way Cassette 1.6TR , Four way Cassette 2.0TR , Four way Cassette 2.6TR , Four way Cassette 3.2TR , HI-WALL SPLIT UNIT , Hi-wall Unit 1.0TR , Hi-wall Unit 2.0TR , Supply, Lifting, Shifting, Positioning, Installation, Testing, commissioning & handing over of the following Inverter model with5 star capable Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat, cool, dehumidifying, air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation and with copper condenser only. , Hi-wall Unit 1.6TR5 star capable ofdelivering 19200 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5 , Hi-wall Unit 2.0TR5 star capable ofdelivering 24000 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5 , AIR HANDLING UNITS , Supply, Lifting, Shifting, Positioning, Installation, Testing, commissioning & handing over of following capacity floor mounted Thermal Break Double skin construction with internal and external sheets of 1.0 mm thickness with galavanizing of 120 gm/m2 ,Air handling unit made out of extruded aluminium structural frame work. Panels shall be made of 50 mm PUF injected panels having density 43 Kg/m3 in galvanised sheet casings having scratch free preplasticised coating on galvanised sheet on external side and plain GI inner sheet. The whole unit shall be mounted on spring isolators , i) The Air handling unit shallcomprise of fan section with Plug Fan/ Backward curvedfanwith limit load characteristics , spark proof fan. fan mounted on the scroll and not on the casing, coil section comprising of vrv/vrf water coil,stainless steel drain pan under coil section, Filter section comprising of prefilter 10 micron and 3 micron fine filters,mixing box along with RA and FAdampers etc. complete in all respect whether specifically speltor not but required to complete the system works. , The entireunitcasing shall be weather proof , made out of50 mm thk.43 Kg/ cum densitydouble skin PUF panels. The entire assembly of the unitshall be mounted on a rigid GSS base frame. Inner skinof the panel shall be 1 mm thickGSS plain and the outer skin shall be with 1 mm thk. Pre plasticized powder coated. The total unit along with VRV/VRF coils and hot water coil shall be AHRI certified. The face velocity of the coils shall not exceed 500 FPM . Theface velocity across the filters shall not exceed 500 FPM. , The coils and filters shall be full face of the unit. The fan and motor shall be mounted on a common base frame with cushy foots / spring isolator to avoid vibration transmission to the base of the unit. The motor shall be effiency 1 and with VFD compatable. , The fan shall be AMCA certified and motor shall be energy efficientEFF1. The fan out let velocity shall limit to 12 m/ sec. The fan access door shall have safetydoor interlock arrangement with motor. The unit shall be supplied withfire retardantdouble canvass connectionbetween the fan out let and supply air flange. , Variable frequency drives including harmonic filters and surge suppresors to be installed in independently with bypass starter panel and also differential pressure sensorwith cabling from the sensor located on the duct to the VFD for Air handling units of following capacity Motors including necessary fittings and fixing accessories etc., complete , The unit shall be supplied with an outletflange at the the supply air side along with opposed blade volume control damper. The damper casing and blades shall be made out of 16 G Aluminum. , The scope includes one set of commissioning filters along with the VFD & Starter panel with Bypass and control panels with MCB,MCCB. , The AHU unit shall outdoor type with all season weather proof protection , The noise level at all-round the unit shall limit to 60 dBA from 1 m distance to the unit. , The fan curves, coil selectionandtechnical data sheet shall be submittedby vendor for scrutiny. , The unit shall be included withAHU & VFD DRIVE STATER & CONTROL PANEL , The unit shall be included withAHU CONTROLL KITS WITH CORDED REMOTES , Unit shall be ultra violet lamp to kill germs/fungus , AHU1 - 30TR capacity , total air qty 12000 cfm, 65mm Static pressure with suitable High efficency motor, 24sqftarea of6 rowcoil(QC LAB). , Heater section should be with 8kW electric strip heater in 2 banks (QC LAB). , AHU2 - 52TR capacity , total air qty50000 cfm, 150mm Static pressure with suitable High efficency motor, 100sqftarea of6 rowcoil (ASSEMBLY HANGER). , Heater section should be with 12kW electric strip heater in 2 banks (ASSEMBLY HANGER). , AHU3 - 44TR capacity, total air qty 17600 cfm, 125mm Static pressure with suitable High efficency motor, 35.2sqftarea of6 row coil (WORKSHOP). , Supply and fixing of thyristor control Duct Heater Bank for humidity control 14kw capacity & necessary accessories to maintain RH (WORKSHOP). , Imported fittings like Y-Joints and headers etc as per the layout (additional supports should consider for both ends of the Y joint) With all necessary accessories i.e fixing etc complete. , CENTRAL CONTROLLER & REMOTE SYSTEM (FOR VRF UNITS) , Centarl controller integrating advanced I Touch screen display Controller type (System controller) for floor Indoor units with necessary software & spare parts. It shall be BMS compatible with BACNet over MSTP output to connect to the main IBMS system and showes real time data for both temperature Limitation and RH% in screen display. This Controllershall be stand-alone controller with features like visual navigation, graphical report, Multi-PC accessand have the capability to program for sequential operation of indoor units etc.,complete. , LOW SIDE VRV/VRF EQUIPMENT , REFRIGERANT PIPING , Interconnecting copper refrigerant pipe work duly insulated with elastomeric nitrile rubber typetubular insulation betweenindoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all piping should be run in perforated cably tray.Cable tray qty specified seperately.. MS supports for refrigerant piping & cables, using angles, channels, Tees, flats, etc should be considered as part of scope.All MS supports shall be given a coat of red-oxide primer and two coats of synthetic enamel paint of approved colour. Class O insulation to be considered for the piping insulation. Cu.pipes shall be supported with PVC sleeves with clamps around and all wall/partition crossings shall have PVC sleeves , 41.3mm OD (insulation =19 mm thick) , 38.1mm OD (insulation =19 mm thick) , 34.9mm OD (insulation =19 mm thick) , 31.8mm OD (insulation =19 mm thick) , 28.6mm OD (insulation =19 mm thick) , 25.4mm OD (insulation =13 mm thick) , 22.2mm OD (insulation =13 mm thick) , 19.1mm OD (insulation =13 mm thick) , 15.9mm OD (insulation =13 mm thick) , 12.7mm OD (insulation =13 mm thick) , 9.5mm OD (insulation =13 mm thick) , 6.4mm OD (insulation=13mm thick) , DRAIN PIPE , Supply & Installation ofCPVC drain pipe insulated with 6 mm thick closed cell FM approved class O nitriler rubber insulation. Necessary U trap for units with clean out plugs to be provided. , 32 mm dia , 25 mm dia , Providing & fixing of 2 Cx 1.5 sqmm cu. cable for control cum trans-mission between Indoor unit and Out Door Unitthrough PVC Conduit. , Supply & providing of MS stand for VRV ODU along with proper supports-suitable for above configuration also including coat of red-oxide primer and two coats of synthetic enamel paint of approved colour. , Supply and installing following size of perforated Hot Dipped Galvanised iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections,joined with connectors,suspended from the ceiling with G.I. suspenders including including Cover on above tray, G.I. bolts & nuts, etc. as as required and also inculding 14 SWG GI cover sheet with 40x5mm GI strip on both sides. , 150mm wide x 75mmHeight, 1.6mm thick , 300mm wide x 75mmHeight, 1.6mm thick , 450mm wide x 75mmHeight, 1.6mm thick , MECHANICAL VENTILATION SYSTEM , Supply, Installation, Testing & Commissioning & Handing over of the following: , Supply, Lifting, Shifting, Positioning, Installation, Testing, commissioning & handing over of the Circular Inline fan Supplying, installing, testing and commissioning of low noise silent type Inline fan with @15mm WC static pressure. The motor shall be suitable for 220 volt single phase 50 cycles AC supply, 6/15 Ampplug and wiring between the fan and the socket andlow sound level exceeding not more than 50dBA. Fan shouldbe complete with all accessories, gravity louver/ shutter as required etc., as per manufacturer specification including transportation to site, all mounting arrangements like brackets etc.,as per specification including transportation to site, all mounting arrangements like brackets etc. It should be suitable for BMS connectivity with necessary accessories and cost of all accessories and all labour charges complete. , Circular Inline fan 100CFM/15mm WC static pressure , Circular Inline fan 200CFM/15mm WC static pressure , Circular Inline fan 400CFM/15mm WC static pressure , Circular Inline fan 500CFM/15mm WC static pressure , Circular Inline fan 600CFM/15mm WC static pressure , Circular Inline fan700CFM/15mm WC static pressure , Circular Inline fan 800CFM/15mm WC static pressure , CLEAN ROOM , CLEAN ROOM FALSE CEILING , Supply, Lifting, Shifting, Positioning, Installation, Testing, commissioning & handing over of the False ceiling panels are designed to fit within each other and suspended by threaded tension bars to the overhead support at fixed intervals , Standard Ceiling Panels have a composite construction of two skins of powder coated GI over an GI frame work with a sealed and insulated interior. 150-200 Kg per sq. mtr load bearing & factory manufacture only to be supply. , 50mmdouble Skin Walkable False Ceiling made of 0.45 mm both Top & Bottom with pre coated GI Sheetswith mounting accessories PUF as in fill (40 +/-2 kg./m3).False ceiling support rods lengthsuit to site condition. Note: 1.All ceiling joints and gaps between panel to panel, ceiling elements (such as HEPA module, diffusers, pipe & electrical drops etc.) etc. to be sealed usingApprovedfood grade silicon sealant of same or nearest colour as panel. The gap above panel to civil wall shall be properly closed with aluminium L - angle secured properly between civil wall and panels. All the gaps between panel to panel shall be closed with GI pre coated External Flashing . All the gaps between ceiling elements and ceiling panel shall be sealed using food grade silicon sealant of the same colour as the panel. , CLEAN ROOM PANELS , Standard wall partitions are a composite construction of two skins over an GI frame work with a sealed and insulated interior. Standard panel dimensions are 1200 mm. Standard panels have an overall thickness of 80 mm.Including Silicon Sealant. The self supporting internal walls are constructed with an interior floor Flashing to suit panel thickness.The Partition seams are sealed by silicone(Food grade) with a perfectly flush finishing. The panels should be factory manufacture. , CLEAN ROOM COVINGS , Extruded Aluminum Powder Coated /Anodized clip on type covings of 60mm radius for Panel to Panel and Panel to Ceiling. , Horizontal & Vertical Coving , 3DCorner Powder Coated , 2D Corner Powder Coated , AL powder Coated TEE Support for Ceiling Panels with threaded Rods and clamps , CLEAN ROOM DOORS , Doors are designed to fit flush into the wall panel / civil walls system on both sides and are supplied in different dimensions. Doors are fabricated from Pre Coated GI sheets & Pufas infill(48 +/-2 kg./m3). Shutter has sheet thickness of 1mm and the frame of 1.2mm. jam depth of door shutter inline with adjacent panel thicknessand shutter width of 40mm. Doors are available in various sizes as per the requirement. The following accessories are a part of the door: Note: 1.All joints between view panel and door panel to be sealed usingapproved food grade silicon sealantof the same or nearest colour as the panel. 2.Colour of the door panel:Same as Panel Colour or Blue 3.Double face VHB tapes of required thickness or silicon sealant to be provided on the periphery of the view panel frame to avoid any play between view panel frame and the slot in the door leaf. , Shutter Thickness: 40 mm thick , Stainless steel hinges (Any reputed Make) , Stainless Steel D type of handles on pull side , Stainless steel push plates on push side. , Heavy duty Concealed door closure , concealeddouble glazed Vaccumized View panel along with self adhesive tape and silicon sealant (500mmWx750mmH) with toughened glass with 6mm thick and black border , Mortice dead lock (ML100D) with both Side Key Operation Cylinder-Dorset , Concealed Flush Bolt Body with rod , Gasket at bottom for Double Door , Stainless Steel kick plates on both sides of 1.2mm thick with 300mm height for material transfer doors for Double Door. , DOUBLE DOOR SIZE , 3500mm Width X 2500mm Height Door (width of each door 1800mm) , VIEW PANELS ON MODULAR PARTITION , SINGLE GLAZED , All Viewpanel units are Double glazed and round profiled Epoxy based powder coated GI wall panel system. Thickness of 6/8 mm Tougened glass. The window system is completelyof food grade Silicone sealed. All veiw panels to have black border. Approx Size of view panels will be 800 x 1000mm , View Panel on 80mm wall panel , FALSE CEILING CUTOUTS FOR ELECTRICAL & HVAC GRILSS,LIGHT FIXTURES ETC. , Frame Work for Wall Panel Cutouts , Back Boxes for Electrical Sockets includes 3M, 2M, 6M, 8M, Single Phase, Three Phase industrials sockets respectively of apprvoed makes like Anchor, MK, North West & Legrand. , Frame work for False Ceiling Cutouts for Electrical & HVAC , PVC Conduit for Electrical Cables / Data Cables 24mm dia / 40 mm dia respectively , INBUILT RETURN RAISER , Supply and Installation of wall panel inbuiltReturn Air Risers of0.8 mm thick GI sheet & G4 Filter in aluminium frame work with proper fixing arrangement & fastening using SS 304 Dome nuts. to be provided up to the top of the false ceiling for HVAC duct connection. along with Butter fly Dmpers on the Top side. , Inbuilt raiser 600 x 600 , GI RETURN AIR FILTER WITH SS PERFORATED SHEET MODULE , Supply & installation of Return Air Raisers SS PERFORATED SHEET MODULE WITH 20 MICRON FILTER ASSEMBLY TO FLUS FIT THE RETURN AIR RISER PANEL. The RA raiser shall be adequately supported to ensure the rigidity. , 450 mm x 450 mm x 450 mm , Supply and Laying ofSelf levelling Expoxy flooring with Floor Preparation work and application ofone coat primer, screed and finishing with Self levelling Epoxy up to a max of 2mm of approved Colour , INSULATED FLEXIBLE DUCT WITH NECESSARY FIXING CLAMPS ON BOTH SIDE FOR TERMINAL HEPA MODULE , Supply, Installation, Testing and Commissioning of The insulated flexible duct of class 1 air duct, light weight, strong, fully flexible & made of double lamination of films permanently bonded to a coated spring tough steel wire helix. The thermal efficiency is ensured with a blanket of fiberglass wool insulation in between. Necessary Fixing Clamp on both side shall be considered. (With Spigot Connection & Rigid GI Round Duct). Note: Rigid GI Round Duct area shall be part of GI Ducting. Each Flexible connection shall not be more than 1 Mtr. , 200 mm Dia , TERMINAL HEPA FILTER WITH MODULES , Supply, Installation, Testing and Commissioning of H14 HEPA Filterwith Housing & Damper (Bottom Discharge Module Type with SS304 perforated grille of 16 SWG sheet along with SS chain link). Complete Housing (Sides + Top) made of extruded aluminium anodized material and low leakage aluminum collar damper with operating bevel gear arrangement, Diffuser Plate,Housing shall be suitable for fixing the Gel Sealtype (Polyurethane gel) terminal HEPA filter (H-13) with Protective Expanded Metal Screen. The Filter Housing shall have provision for smoke aerosol test point and differential pressure measuring point. The filter mounting box shall have a provision to replace filter & control the airflow from inside conditioned space. The HEPA filter modules are of the following sizes: , Plenum box size of 485x485x220H (530X530mm Flange to Flange) inlet collar with Diffuser plate & TOP entry 305 Sq / dia Collar with necessary clamps completewith gel seal filter minipleat H-13 of Size: 450X450X70mmwith DOP port and bevel gear arrangement room side operation damper. , PRESSURE MONITORING SYSTEM , Supply, Installation, Testing and Commissioning of Compound Magnahelic gauges housed in a SS304 front cover (50-0-50 Pa) complete with PVC tubing and SS perforated nozzle (For Installation in Clean Room Panel for Classified Areas) , MISCELLANEOUS , Commissioning of Classified Areas with Validation reports comprising of: , AHU & Duct leakage testing with pressurization (As per SMACNA air duct leakage standards). This process to be documented. , HVAC testing adjusting and balancing as per ASHRAE standard. , Air balancing with flow hood meter , Room Temperature & Humidity mapping for 24 hours and monitoring for 3 days. , Room pressure balancing with monitoring for 3 days. , HEPA Filter Integrity Test. , Particle count test , Providing all documentation of DQ, IQ, OQ & PQ in approved formats. , The Validation has to be carried out for minimum 3 working days continuously for Air flow, Temperature and Humidity. For Room Pressure Differential continuously for 3 working days. In case of any non compliance the system has to be set right and the Validation has to be carried out once again as per the above schedule. Validation has to be carried out by valued Certification ISO 14644-1 is a widely recognized certification .Its shouldissued by the International Organization for Standardization (ISO) or The FDA, Health Canada, and the EU recognize this certification. , Clean Air Devices Equipments , Supply, Lifting, Shifting, Positioning, Installation, Testing, commissioning & handing over of personal Air shower , single entry and single exit,high velocity, low pressure system SS304 nozzles,pre and HEPA fillers, completely self contained unit, utilizing low wall return (floor grill type not accepted) , The Unit shall be consisting of ISO class 8 clean room compatible pre-fabricated units built up, in place having fluorescent lamp with acrylic cover, electronic ballast , both side red and green indicators, elector-magnetic latches on both sides of Dorma make to ensure both doors do not open simultaneously, 5.0 mm thick viewing glass,SS304 finish handles of Dorma make, door closer with hold open arm of Dorma make, blower, control wiring, emergency stop switch etc. , For 3 persons entry , Supply, Lifting, Shifting, Positioning, Installation, Testing, commissioning & handing over of stainless steel centrifugal air curtain having following specification.The product should be made up stainless steel 304Grade having 3 Blowers(in M.Steel), 2 Motors operating on three phase , Power =1650 Watt having RPM (Max/Min = 2700) and CFM. Overall Dimension of 6000X230X212(mm) with Noise level < 66 db. Air Curtain should be provided with velocity control switch and a Door sensor. The product should carry manufacturers warranty of one year from the Date of Supply. Along with Fabrication work of providing 2/1 MS Pipe , Tin Sheet as cover, Bracked and screws*Variations acceptable in parameters above - 5-10% The Product should be Supplied along with PVC curtains & SS Bracket for PVC Support. Supply, installation, testing and commissioninging of transparent blue PVC Strip curtain,these medium weight strip will help with temperature control or dust exclusion without impeding access, It is suitable for the door is the main entry gate of the premises, means exposed to air.The Product should be complete in all aspect as per Engineer incharge instructions , Supply, Lifting, Shifting, Positioning, Installation, Testing, commissioning & handing over of stainless steel centrifugal air curtain having following specification.The product should be made up stainless steel 304Grade having 2 Blowers(in M.Steel), 2 Motors operating on three phase , Power =1650 Watt having RPM (Max/Min = 2700) and CFM. Overall Dimension of 3500X230X212(mm) with Noise level < 66 db. Air Curtain should be provided with velocity control switch and a Door sensor. The product should carry manufacturers warranty of one year from the Date of Supply. Along with Fabrication work of providing 2/1 MS Pipe , Tin Sheet as cover, Bracked and screws*Variations acceptable in parameters above - 5-10% The Product should be Supplied along with PVC curtains & SS Bracket for PVC Support. Supply, installation, testing and commissioninging of transparent blue PVC Strip curtain,these medium weight strip will help with temperature control or dust exclusion without impeding access, It is suitable for the door is the main entry gate of the premises, means exposed to air.The Product should be complete in all aspect as per Engineer incharge instructions , SS/PP Furniture , Design, engineering, fabrication, supply, erection and testing of Cross over bench made up of 10 mm thick PP sheets of size which has to fully fixed in the designated placein the changeroom, with heat welding .Bottom of bench will have pegion holes for keeping dayshoes/CR sleepers of equal size 250 mm X182 mm in two rows. , Design, engineering, fabrication, supply, erection,testing and commissioning ofgarment cubicle compatible for ISO class 8 cleanroom either SS304 sheet material for keeping maximum 15 cleanroom garments including 15 sets of garments, sliding doors, glazing, UV light, Pre filter, HEPA filter and blower for recirculation of air, complete ready to use. , ELECTRICL LIGHTS AND ACCESSORIES , LIGHT FIXTURES , Supply,Installation, Testing & commissioning of following LED light fittings for lighting fixture with accessories and LED chip. The Luminaire shall be with CRCA housing and Luminaire and an operating Voltage Range of 120 - 277V, Internal Surge Protection 2.5KV. , 40W 2x2 (600mmx600mm) LED Screw less Clean room recess mounted bottom opening luminaires with toughed glass with diffused acrylic cover, construction of the housing with engineering push back mounting arrangement system of Approved make. System output 4000 lumens to be considered.(Philips or equivenlant) , Electrical Cabling with PVC Conduiting for the Lights 3 Core1.5 Sqmm , POWER SOCKETS , Supply, Installation, Testing & Commisioning of following Plug sockets & Push buttons. The assembly shall be housed in metal box / on partition / on wall concealed type. Rate shall include the internal wiring, terminations, GI back box and front face plate, enclouser with fixing accessary like lugs, screws, blot nuts, ferruls etc. as per tender technical specifications.Necessary wall chipping, drilling & fixing of back box in concelead type. Rate shall be included backbox fixing concelead on the walland chipping along the wall fixing chicken mesh and making good surface of wall as required at site. Note : Modular sockets Back box should be considered 45mm depth only. , Emergencystop push button station with enclosure fixed on wall or on required MS angle support with all its accessories of approved make. , EARTHING , GI Plate Earthing , Supply and Laying of following earthing strips / earth wire of the following sizes with required accessories like clamps,bolts & nuts, painting. Two numbers of earth strips should run along with cable tray/civil wall with proper using bolt and nuts for strips connectivity and two earth points shall be end terminated for all equipments, motors, all Electrical and ELV panels, DB etc., refer the earthing schematic for considering the earth strips. , 50mmx6mm GI Strip , DRAIN PIPE , Supply & Installation ofPVC drain pipe insulated with 9 mm thick closed cell FM approved class O nitriler rubber insulation. Necessary U trap for units with clean out plugs to be provided , 40mm dia , Sheet Metal Work usingFactor Fabricated Duct with Ductmate (TDF) Flanges for all sizes of the duct. Fabrication as per SMACNA Standards , Galvanizing shall be Class VIII – light coating of zinc, nominal 120 gm / sqm surface area and Lock Forming Quality prime material alongwith mill test certificates.In addition, if deemed necessary, samples of raw material, selected at random by owner’s site representative shall be subject to approvaland tested for thickness and zinc coating at contractor’s expense. , All duct construction and installation shall be in accordance with SMACNA standards.In addition ducts shall be factory fabricated utilizing the following machines to provide the requisite quality of ducts. , All ducts shall be fabricated and installed in workmanlike manner, conforming to relevant SMACNA codes. , To ensure the air tightness, all ducts shall be checked with Duct pressure Test after completion of duct installation but before applying insulation , Guide vanes to be installed in elblow, reducers and other accessories , Stiffernner to be considered for ducts with more than 1200mm wide ducts , Duct joining shall completed with adhesive type gasket and sealant , All ducts needs to properly supported with suitablewire supports as per makes given in make list. The cost shall be inclusive of anchor fastners/wedge supports suiting to steel structure. , With all necessary accessories i.e fixing etc complete. , Rectangular Ducting , Sheet Metal Ducting As per Specification. Pressure 500 Pa , 24 G Ducting with Factor Fabricated Duct/ TDF flanges , 22 G Ducting with Factor Fabricated Duct/ TDF flanges , 20 G Ducting with Factor Fabricated Duct/ TDF flanges , Thermal & Acoustic insulation , Thermal Insulation for ducts , Supply, installation and testing of Class- O, 25 mm thick Closed cell elastomeric insulation for thermal insulation for indoor supply air ducts with density not less than 50 kg / cum. Microban antimicrobial protection insulation material to be fire retardant. Joining tapes & low VOC adhesive to be supplied with the insulation material by the insulation material manufacturer. , Supply, installation and testing of Class- O, 19 mm thick Closed cell elastomeric insulation for thermal insulation for indoor supply air / return air ducts with density not less than 50 kg / cum. Insulation material to be fire retardant. Joining tapes & low VOC adhesive to be supplied with the insulation material by the insulation material manufacturer. , Supply, installation and testing of Class- O, 13 mm thick Closed cell elastomeric insulation for thermal insulation for indoor supply air / return air ducts with density not less than 50 kg / cum. Insulation material to be fire retardant. Joining tapes & low VOC adhesive to be supplied with the insulation material by the insulation material manufacturer. Refer method statement in technical specification for insulation works. , Acoustic Insulation for ducts , Supply, transportation , Lifting , Shifting ,installation ,testing and commissioning of Acoustic insulation for ducting with 50mm TF quality thermocole, density 18kg/cum, chicken wire mesh and 2 coats of 12mm thick sandcement plastering for exposed ducting. , Air Terminal Devices , Supply, installation, testing and balancing Powder Coated extruded aluminium grilles with collar damper for supply and return distribution(colour for the grill to be confirmed by department before placing theorder) . Deflection of the grille shall be 0 / 15 / 30. same will be confirmed later. Single / 2 way / 4 way deflection shall be confirmed later. , Supply, Fixing, Testing and commissioning of Aluminium powder coated4-Way Diffusers with Anti smudge ring and all fixing accesseroies as per standard specifications and practice. , Supply, installation and testing ofJet diffuserwith fire resistance flexible double canvas Connection for supply distribution(colour for the Jet to be confirmed by consultant/ PMC team before placing theorder) , Ø 315 , Supply and fixing of 18G circular butterfly damper with provision to fix to the rectangular duct with GI circular flanges. , Supply and fixing of Insulated Aluminum flexible duct with 25mm thick glass wool insulation covered with aluminum foil suitable to connect the ducting including necessary clamps at both ends of size , Acoustic Insulation for AHU rooms , Supply, installation and testing of acoustic insulation on walls & ceilings for the AHU Rooms with 50mm thk. 24 kg/ cum density Resin bonded fiber glass covered with 24 G GI perforated sheet as per specification. The FG slabs shall be placed in the grid of 600mmx600mm centers formed out of GI channels. , Supply and Fixing of Fresh Air / Exhaust air Louvers with brass wire mesh backing with Pre filter along with Dampers for all AHU room fresh air wall openings. , Supply, installation and testing of Factory fabricated Rectangular shape - GI Volume control dampers, 1.6-mm GI Steel Frame, 1.6-mm GI blades, 150-mm width, with required hardware and accessories. Stiffen damper blades for stability. Include locking device to hold single-blade dampers in a fixed position without vibration & engraved marking on position of damper. , Supply, installation and testing of Aluminium powder coated fresh air intake / exhaust air louvers backing with pre filters complete with HDPE insect mesh with cowl mounting frame and 45 deg angle suitable for protection against splashing rain water fixed in a powder coated Aluminium angle mount frames as required for all AHU ROOM fresh air wall openings. , Supply, installation and testing of Motorized Fire dampers (MSFD) with ON/OFF type actuator. The dampers to be fire rated for 120 minutes at 250Deg C. Fire damper to be provided with matching flanges on both sides. Fire dampers should be supplied with extended fire rated sleeves. Actuators shall be for spring return type & shall be fire rated for 120 minutes @ 120Deg C. Actuators to be internally mounted. Actuators should be suitable for BMS connectivity with necessary accessories. , Note:Duly factory fitted and tested at manufacturers works and certificate to this effect produced along with delivery of fire damper. , Fire damper , Actuator,Sensor,Control panel and relay/communication module, interlinking cabling , Supply, installation and testing ofGI Non ReturnDampersat suction & discharge side, suitable for duct mounted including mating galvanized angular iron flanges. , Supply, Installation, Testing and Commissioning of Fire Retardant Canvass Connections with MS Eoxy painted / Al powdercoated finish angle flanges on both sides as per the specifications and approved drawings. , Supply, installation, testing and commissioning of FM approved 32mm thickness of closed cell nitrile rubber without aluminium foil temperature range from -10ºC to +60ºC, Class O fire category and as per specification.for Underdeck insulation, as per technical specifications and as shown in approved drawings. Adhesive shall be used as recommended by insulation manufacturer for applying over concrete structures and it shall be green building complaint. Makes: Galaxy, sheth insulation, ALP Aeroflex,neothermalinsulation. , MS structural Steel for supports ofUnit, Piping, Control cabling supports including fabrication,erection with GI clamps and brackets with adequate number of supports for pipes every 2.5 mts interval and at bends for Insulated refrigerant pipe for exposed areas etc , FALSE CEILING WORK , Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. , wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint , all as per manufacturers specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (a)12.5 mm thick tapered edge gypsum moisture resistant board. (Make : Gproc , L Strong , Armstrong) , ELECTRICAL WORKS: , MV Panels VRF/VRV OUTDOOR PANNEL-1 , Supply, installation,Testing and Commissioning of 3 phase and Neutral 415V, 4 wire Free Standing Floor mounted MV panel made out of 14 SWG MS sheet after seven tank process and painting with Epoxy powder coating. , The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. , The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. , The panel shall be got fabricated from manufacturers with CPRI Test certificate only. The PCC shall have at least two spare cubicles of the maximum rating. The size of all Panel Mounting Meters shall be 96X96mm. , The Panels shall be mounted on U channels including supply and fixing of the same. Every ACB shall be provided with ON/OFF /Trip Indication lamps of LED type. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely. , M.V.PANEL ( OUTDOOR ) -VRF OUTDOOR UNIT , Incoming : 800A FP 50KA EDO ACB with Microprocesser Based releases for Overload, S/Cand earth fault- 1 set , BUSBARS : 800A, TPN Aluminium busbars – 1set , Metering for Incomer , Phaseindicating lamps - 1 set withtoggle switch , Voltmeter (0-500V) with selector switch - 1 set , Ammeter (0-800A) with selector switch - 1 set , Multifunction Meter -1Set , 800/5A, CL-1, 15VA CTs with resin cast- 3Nos. , Outgoing Feeders :- , 63A TP 16KA MCCB As Outgoing Feeder - 18 Nos , Earth bus bar with GI Strip , MV Panels VRF/VRV OUTDOOR PANNEL-2 , Supply, installation, Testing andCommissioning of 3 phase and Neutral415V 4 wire Free Standing Floor mounted outdoor type weather proof double door with canopy on top MV panel made out of 3mm thick CRCA/Galvanised steel enclosurefor main frame and 2mm thick partitions for mechanical strength/ruggedness, after seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable ratingTPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMCbarriers and color coded with Heat shrinkable sleeves. The Metering shall beprovided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. Outdoor panels shall have IP-55 degree of protection wiith external door . Enclosure shall be modular with bolted design. Enclosure shall be powder coated with RAL-7035 coat with matt finish. Design ambient temperature shall be 50 degree centrigrade. No use of hygroscopic material like FRP/Hylam/Bakellite sheet inside the panel for partitions or any other purpose. , The PCC shall have at least twospare cubicles. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels including supply and fixing of the same. Every ACB shall be provided with ON/OFF /Trip Indication lamps of LED type. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely.ACBs shall have built-inAll ACBs shall be provided with Digital type Ammeter of suitable range along with CTs. All ACBs shall be provided with ON/OFF/TRIP indication lamps and shunt trip coils. All MCCB/ACBs of rating 160Aand above shall be with Micro processor releases All MCCBs below 160A shall be with adjustable thermal magnetic based releases. All MCCBs shall be with spreader links and rotary handle. All MCCBs shall be over load & short circuit releases withIcu=100% Ics. All CTs/CBCT shall be resin cast type. All Controlling wiring shall be FRLS cables, all the bus bar sleeves shall be Heat shrinkable kits.Panels shall have form 4b/form 3b construction as per the requirement. ACBs shall conform to IEC 60947 (part 1&2), shall be suitable for rated system voltage 690V, Insulation voltage 1000V and Impulse withstand of 12KV. , For MCCB with Microprocessor based release : A common indication LED for internal temp/ fault/alarm . MCCB should have in-built feature of logical selectivity by which it can give a time delay of 50msec between upstream and downstream MCCB The microprocessor based release should have the following settings: • Overload Settings: 0.4 to 1 times of Ir • Short Circuit Settings: 1.25 to 10 times of Ir. • Earth fault Settings: 0.2 to 1 times of In. • Neutral protection settings: 0 – 50% – 100%Ir. • Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. • MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) • The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material. , OUTDOOR MAIN PCC PANEL , Incoming : , Incoming : 800A FP 50KA EDO ACB with Microprocesser Based releases for Overload, S/Cand earth fault- 1 set , Busbars :800A TPN Aluminiumbusbars - 1 set , Outgoings : , 63A TPN, 16kA,Moulded Case Circuit Breakerand Electromagnetic based protection release having adjustable over load, short circuit and earth fault protection.- 20 No. , Metering : , 0-500V Digital Voltmeter withselector switch and Fuses - 2 sets , 0-800A Digital Ammeter with CTs ofratio 800/5A,Class 1 Accuracy and15VA burden and selector switch - 2sets , LED Phase indication lamps with individuals Fuses and control withtoggle switches- 2sets , CT Operated Load Manager with RS 485 port ( Similar to EM-6400) – 2sets , Suitable Earth strip at bottom of the panel of GI Strip , Supply, Installation, Testing and Commissioning of following size 1.1 KV Grade Aluminum / Copper conductor XLPE insulated PVC sheathed armoured cable and shall be laid on cable traywith all installation materials. the cable shall conform to IS 7098 / part-I. , 4Core X 10Sqmm (Copper)(Armoured) (for 20HP ODU ) - 27Nos , 4Core X 10Sqmm (Copper)(Armoured) (for 28TR AHU ) - 1Nos , 4Core X 6Sqmm (Copper)(Armoured) (for 8KW HEATER ) - 1Nos , 4Core X 16Sqmm (Copper)(Armoured) (for 52TR AHU ) - 1Nos , 4Core X 10Sqmm (Copper)(Armoured) (for 12KW HEATER ) - 1Nos , 4Core X 16Sqmm (Copper)(Armoured) (for 42TR AHU ) - 4Nos , 4Core X 10Sqmm (Copper)(Armoured) (for 15KW HEATER ) - 4Nos , Supply, Installation, Testing and Commissioning of following size ELECTRICAL TERMINATIONS WITH SINGLE COMPRESSION GLANDS / LUGS: , 4Core X 10Sqmm (Copper)(Armoured) (for 20HP ODU ) - 27Nos , 4Core X 10Sqmm (Copper)(Armoured) (for 28TR AHU ) - 1Nos , 4Core X 6Sqmm (Copper)(Armoured) (for 8KW HEATER ) - 1Nos , 4Core X 16Sqmm (Copper)(Armoured) (for 52TR AHU ) - 1Nos , 4Core X 10Sqmm (Copper)(Armoured) (for 12KW HEATER ) - 1Nos , 4Core X 16Sqmm (Copper)(Armoured) (for 42TR AHU ) - 4Nos , 4Core X 10Sqmm (Copper)(Armoured) (for 15KW HEATER ) - 4Nos , SITC of GI Earthing for equipment , 8 SWG G.I. Wire , SUBHEAD-IVX : POWER WIRING : , Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required. (But without MCB/RCCB/Isolator) , 12 way (8 + 36), Double door , 8 way (8 + 24), Double door , Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuitbreaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. , 63A , Supplying and fixingof 6A to 32A rating 240/415V,10kA , C Curveminiature circuit breaker suitable for inductive load of following polesin the existing MCB DB complete with connections ,testing and commissioning etc complete. , Single Pole , Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required. (But without MCB/RCCB/Isolator) , 12 way (4 + 24), Double door , 8 way (4 + 24), Double door , Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, molded case circuitbreaker (MCCB), having a breaking capacity 25 KA in the existing MCB DB complete with connections, testing and commissioning etc. as required. , 200A 4P MCCB, 35 kA , Supplying and fixingof following rating 240/415V,10kA , C Curveminiature circuit breaker suitable for inductive load of following polesin the existing MCB DB complete with connections ,testing and commissioning etc complete. , 63A Three Pole MCB 16 kA , Supply,erection,testing and commissioning of the following switchsockets with anodised G.I. Box,front plate and fixing screws etc . , 6/16 Amps, 5-pin (250 Volts) single phase modular type socket controlled by 16 Amps SP Switch. , Supply and fixing of factory made 20A, 1Ph Metalclad socket with plugtop &20A SPMCB in MS box including all fixing accessories , Supply and fixing of factory made 25A, 1Ph Metalclad socket with plugtop &25A SPMCB in MS box including all fixing accessories , Supplying and fixing 32A, 415V, TPN industrial type socket outlet with 4 pole and earth metal enclosed plug top alongwith 32A C Curve, TP MCB in sheet metal enclosure on surface/recess with chained metal cover for the socket outlet and complete with connections ,testingand commissionining etc complete as required. , Supplying and fixing 63A, 415V, TPN industrial type socket outlet with 4 pole and earth metal enclosed plug top alongwith 63A C Curve, TP MCB in sheet metal enclosure on surface/recess with chained metal cover for the socket outlet and complete with connections, testingand commissionining etc complete as required. , Supply,erection,testing and commissioning of the following switchsockets with anodised G.I. Box, Stainless steel front plate and fixing screws etc . , 6/16 Amps, 5-pin (250 Volts) single phase modular type socket controlled by 16 Amps SP Switch. , Supply and Wiring with the following size 1100V grade PVC insulated multistrand, FRLS Copper conductor wires in and includingsuitable size heavy gauge PVC conduit concealed in wall / Ceiling including all accessories such as junction boxes, bends, elbows including end terminated with suitable lugs. , 2runs of 4Sq.mm wires with 1run of 4 Sq.mm wireinand including 25mm diaPVC Conduit(For 16A Sockets). , 2runs of 6Sq.mm wires with 1run of 6 Sq.mm wireinand including 25mm diaPVC Conduit(For AC Sockets). , 4runs of 10Sq.mm wires with 2run of 6 Sq.mm wireinand including 25mm diaPVCConduit. , 4 X 16 sq. mm + 2 X 16 sq. mm earth wire in existin PVC / Floor raceways , Supply and Wiring with the following size 1100V grade PVC insulated multistrand, FRLS Copper conductor wires in existingMS/PVC conduit / Floor race way including all necessary interconnections etc complete. , 2runs of 2.5Sq.mm wires with 1run of 2.5 Sq.mm wire in existingPVC Conduit(For 6A Sockets & Switch boards),ferrules incliding all labour charges etc., complte.. , 2runs of 4Sq.mm wires with 1run of 4 Sq.mm wiresin existingPVC Conduit(For 16A Sockets), ferrules incliding all labour charges etc., complte.. , 2runs of 6Sq.mm wires with 1run of 6 Sq.mm wiresin existing PVC Conduit(For AC Sockets), ferrules incliding all labour charges etc., complte.. , 4runs of 6Sq.mm wires with 2run of 6 Sq.mm wiresin existing PVC Conduit. for run of mains, ferrules incliding all labour charges etc., complte. , 4runs of 10Sq.mm wires with 2run of 6 Sq.mm wireinexistingPVCConduit.for run of mains, ferrules incliding all labour charges etc., complte. , 4 X 16 sq. mm + 2 X 16 sq. mm earth wire in existin PVC / Floor raceways for run of mains, ferrules incliding all labour charges etc., complte. , Providing and fixing of maintenance free earthing which consists of 40mm Dia, standard length (as per Equipment Supplier) electrode capsule,filled with earth enhancing compound,sealed at both ends and brazed lead for connection at one end suitable for direct installation at site at a depth of 2.5 mtr.Earth enhancingcompound upto a depth of 2.0 mtr around the electrode capsule and also wih brick chamber and cast Iron cover etc complete including excavation in all types of soil. , Supply and laying of following size strips including all necessary inter connections with earth station and equipments , 50 X 5 mm Hot dip GI strip , 25 X 5 mm Hot dip GI strip , Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. , Supply and fixing of following size GIPerforated type cable tray made out of 2mm thick G.Isheet including MS supports for fixing the tray, anchor fasteners etc., laid including 2runs of 25x5 GI strip etc including with 2 mm thickGI covers. , 300 mm widex 50 mm Height , 150 mm widex 50 mm Height , 100 mm widex 50 mm Height , Supply, laying, jointing GI pipes of medium quality including specials of approved make fixed to wall/to the required lengths, threading jointing chasing the walls and floor, making holes, clamping of clamps and making good the same, necessary excavation, etc., complete as specifed and directed. , 50mm Dia , SUBHEAD-XV : SHOP ELECTRIC: , Supplying and fixing 20A, 415V, TPN industrial typesocket outlet with 4 pole and earth metal enclosed plug top alongwith 20A C Curve,4 P MCB in sheet metal enclosure on surface/recess with chained metal cover for the socket outlet and complete with connections ,testingand commissionining etc complete as required. , Supplying and fixing 32A, 415V, TPN industrial type socket outlet with 4 pole and earthalongwith 32A C Curve, TP MCB in sheet metal enclosure on surface/recess with chained metal cover for the socket outlet and complete with connections ,testingand commissionining etc complete as required. , Supplying and fixing 63A, 415V, TPN industrial type socket outlet with 4 pole and earthalongwith 63A C Curve, TP MCB in sheet metal enclosure on surface/recess with chained metal cover for the socket outlet and complete with connections ,testingand commissionining etc complete as required. , Supply, testingand commissioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor cable. The cable shall conform to IS 7098/ Part-II. , 4C X 10Sq.mm , 4C X 16Sq.mm , 3.5C X 25Sq.mm , 3.5C X 35Sq.mm , 4C X 50Sq.mmCu Armoured Cable , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. , Upto 35 sq. mm , Above 35 sq. mm and upto 95 sq. mm , Above 95 sq. mm and upto 185 sq. mm , Above 185 sq. mm and upto 400 sq. mm , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. , Upto 35 sq. mm , Above 35 sq. mm and upto 95 sq. mm , Above 95 sq. mm and upto 185 sq. mm , Above 185 sq. mm and upto 400 sq. mm , Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. , Upto 35 sq. mm , Above 35 sq. mm and upto 95 sq. mm , Above 95 sq. mm and upto 185 sq. mm , Above 185 sq. mm and upto 400 sq. mm , Providing Indoor ordinary end terminations for thefoollwing 1.1 KV grade XLPE insulated armoured alluminium conductor cables with compression type steel gland, Bi-metallic lugs using crimping tool, Insulation tape, Identification tags etc., including end termination and Earthing of Gland with 8SWG GI Wire. , 4C X 10Sq.mm , 4C X 16Sq.mm , 3.5C X 25Sq.mm , 3.5C X 35Sq.mm , 4C X 50Sq.mmCu Armoured Cable , Supply and fixing of following size GIPerforated type cable tray made out of 2mm thick G.Isheet including MS supports for fixing the tray, anchor fasteners etc., laid including 2runs of 25x5 GI strip etc including with 2 mm thickGI covers. , 600 mm widex 50 mm Height , 450 mm widex 50 mm Height , 300 mm widex 50 mm Height , 150 mm widex 50 mm Height , Providing and fixing of maintenance free earthing which consists of 40mm Dia, standrad length (as per Equipment Supplier) electrode capsule,filled with earth enhancing compound,sealed at both ends and brazed lead for connection at one end suitable for direct installation at site at a depth of 2.5 mtr.Earth enhancingcompound upto a depth of 2.0 mtr around the electrode capsule and also wih brick chamber and cast Iron cover etc complete including excavation in all types of soil. , Supply and laying of following size strips including all necessary inter connections with earth station and equipments. , 50 X 5 mm Hot dip GI strip , 25 X 5 mm Hot dip GI strip , Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. , Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCBdistribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs andincomer ) as required . (Note : Vertical type MCB TPDB isnormally used where 3 phase outlets are required.) , 12 way (8 + 36), Double door , Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuitbreaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. , 250 A, 35KA 4P MCCB , 200 A, 35KA 4P MCCB , 63 A, 4P RCBO , 100 A, 4P ,25ka MCCB ( , 125 A, 4P ,25ka MCCB ( , Supply,Installation Testing Commissioning of following TTA PANEL.Supply, erection, testing and commissioning of 415V, 3 phase 4 wire 50 c/s Main LT Panel at Substation fully compartmentalized cubical type, as per the standards IEC61439-1&2 as tested assembly (TTA) ,tested for impulse voltage 8 KV,IP 42 fabricated CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having required capacity extensible type FP bus bars of high conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 35KA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, Form of separation shall be form 4b with metallic separation only entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars, interconnection, interlocking between feeders etc.,with indication lamps, push buttons necessary accessories, complete with following incoming and outgoing switchgears with protection and metering etc. as per specification and schematic diagram including provision to be made for interfacing with BMS etc. complete as required, with incoming & outgoing cable entry from bottom/top and bus-duct entry from top, wiring with 2.5sq. mm. FRLS insulated copper conductor , cable alleys, PLC cable gland i/c providing following switch gears , All ACBs should have Ics=Icu=Icw for 1 sec All MCCBs shall be rating for 25kA (Ics=Icu). All MCCBs above 63A should be provided with Copper Spreader Terminals Marshalling Bay To Be Provided for BMS Operation Approval shall be taken for each panel before fabrication. PLC based control with 100% hot redundant PLC arrangement with touch-screen LCD / LED display board (min. 8 Diag size)along with all accessories for complete automatic, manual andHMI controls & indication. Energy Management Software wth necessary cabling shall be in scope, nos. of breaker / Meters to be connect with energy management software shall be inform by Engineer In Charge. , USER EQUIPMENT PANEL , Incomer , 630 A, 50KA, 4P , ACB, Should be supplied with Microprocessor basedS/C, E/F, O/CProtection.(70 - 100% Plug setting) – 1No , 2A, controlMCB - 3 Nos. , Outgoings : , 200A ,35KA TP, MCCBs - 9 Nos , 125A ,25KA TP, MCCBs - 3 Nos , 100A ,25KA TP, MCCBs - 3 Nos , 63A ,16KA TP, MCCBs - 3 Nos , Surge Protection Device - 1 No , Bus Bar : 630 A TPN Alluminium Bus Bar-1 Set , MeteringIncomer : , 0-500V Digital Voltmeter with selector switch andMCB-1set , CT Operated Load Manager (similar to EM-6400) - 1 No , 0-630A Digital Ammeter with resin cast CTsof ratio 630/5A Class 1 Accuracy and 15VA burden and selector switch -1set , LED phase indication lamps with toggle switch -1set , Main LDB , Incomer , 250 A, 35KA, 4P , MCCB, Should be supplied with Microprocessor basedS/C, E/F, O/CProtection.(70 - 100% Plug setting) – 1No , 2A, controlMCB - 3 Nos. , Outgoings : , 160A ,35KA TP, MCCBs - 5 Nos , 63A ,16KA TP, MCCBs - 2 Nos , Surge Protection Device - 1 No , Bus Bar : 250 A TPN Alluminium Bus Bar-1 Set , MeteringIncomer : , 0-500V Digital Voltmeter with selector switch andMCB-1set , CT Operated Load Manager (similar to EM-6400) - 1 No , 0-250A Digital Ammeter with resin cast CTsof ratio 250/5A Class 1 Accuracy and 15VA burden and selector switch -1set , LED phase indication lamps with toggle switch -1set , Main PDB , Incomer , 630 A, 50KA, 4P , MCCB, Should be supplied with Microprocessor basedS/C, E/F, O/CProtection.(70 - 100% Plug setting) – 1No , 2A, controlMCB - 3 Nos. , Outgoings : , 200A ,35KA TP, MCCBs - 5 Nos , 63A ,16KA TP, MCCBs - 2 Nos , Surge Protection Device - 1 No , Bus Bar : 630 A TPN Alluminium Bus Bar-1 Set , MeteringIncomer : , 0-500V Digital Voltmeter with selector switch andMCB-1set , CT Operated Load Manager (similar to EM-6400) - 1 No , 0-630A Digital Ammeter with resin cast CTsof ratio 630/5A Class 1 Accuracy and 15VA burden and selector switch -1set , LED phase indication lamps with toggle switch -1set , COMPRESSOR PANEL , Incomer , 250 A, 35KA, 4P , MCCB Should be supplied with Microprcessor basedS/C, E/F, O/CProtection.(70 - 100% Plug setting) – 1No , 2A, controlMCB - 3 Nos. , Outgoings : , 160A ,25KA TP, MCCBs – 3 Nos , 63A ,16KA TP, MCCBs - 1 Nos , 40A ,16KA TP, MCCBs - 1 Nos , Surge Protection Device - 1 No , Bus Bar : 250 A TPN Alluminium Bus Bar-1 Set , MeteringIncomer : , 0-500V Digital Voltmeter with selector switch andMCB-1set , CT Operated Load Manager (similar to EM-6400) - 1 No , 0-250A Digital Ammeter with resin cast CTs of ratio 250/5A Class 1 Accuracy and 15VA burden and selector switch -1set , LED phase indication lamps with toggle switch -1set , SUBHEAD-XVI :TELEPHONE AND LAN : , Supply and laying of 25mm dia, 16 SWG black enamelled M.S. conduit concealed in wall/ ceiling/ floor including all accessories such as junction boxes, conduit bends, etc., complete as required for Telephone etc., , Supply and laying of 25mm dia, heavy gaugePVC . conduit concealed in wall/ ceiling/ floor including all accessories such as junction boxes, conduit bends, etc., complete as required for Telephone etc., , Supply and laying of 25mm dia, heavy gaugePVC . conduit concealed in wall/ ceiling/ floorand drawing of 12 SWG GI Wireas fish wire for laying of LAN Cables at a later stage and supply of all fixingaccessories such as junction boxes, conduit bends, etc., complete as required. , Supply and fixing of Telephone outlet (RJ11) with anodised GI box with front plate and fixing screws. , Supply,Installation,Testing and commissioning ofRJ 45 socket(FOR LAN) with flush mounting G.I. box, with front plate and fixing screws etc complete. , Supply and laying of 2pair 0.5mm dia PVC insulated Copper conductor Telephone wireconforming to DOT Specifications in already laid PVC Conduit including necessary interconnections. , Supply and laying of Cat 6 LAN cable conforming to DOT Specifications in already laid PVC Conduit Floor Race way including necessary interconnections. , Supply and laying of 10 Pair0.5 sqmm armoured copper conductor cable cable conforming to DOT Specifications in existing cable trench /Floor Race way including necessary interconnections. , Supply and installation of100 pair Krone connectors inMS junction box complete as required. , Supply and installation of50 pair Krone connectors inMS junction box complete as required. , Supply and installation of20 pair Krone connectors inMS junction box complete as required. , Supply, laying, jointing GI pipes of medium quality including specials of approved make fixed to wall/to the required lengths, threading jointing chasing the walls and floor, making holes, clamping of clamps and making good the same, necessary excavation, etc., complete as specifed and directed. , 50mm Dia , SUBHEAD-XVII :UPS WIRING : , Supply and fixing of2 Nos of 6/16A, 5Pin Socket outlet with 2Nos ofswitch of 16A ratingincluding Modular G.I Box, Front Plate and also including all fixing accessories etc complete. ( For UPS Socket) , 6/16 Amps, 5-pin (250 Volts) single phase modular type socket controlled by 16 Amps SP Switch including Modular G.I Box, Front Plate and also including all fixing accessories etc complete. , Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCBdistribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs andincomer ) as required . (Note : Vertical type MCB TPDB isnormally used where 3 phase outlets are required.) , 4 way (4 + 12), Double door , Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, molded case circuitbreaker (MCCB), having a breaking capacity 25 KA in the existing MCB DB complete with connections, testing and commissioning etc. as required. , 200A 4P MCCB, 35 kA , Supplying and fixingof following rating 240/415V,10kA , C Curveminiature circuit breaker suitable for inductive load of following polesin the existing MCB DB complete with connections ,testing and commissioning etc complete. , 63A 4P MCB 10 kA , 63A TPN MCB 10 kA , Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required. (But without MCB/RCCB/Isolator). , 8 way (8 + 24), Double door , Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuitbreaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. , 63 A , Supplying and fixingof 6A to 32A rating 240/415V, 10kA, C Curveminiature circuit breaker suitable for inductive load of following polesin the existing MCB DB complete with connections, testing and commissioning etc complete. , Single Pole , Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copperconductor, single core cable in surface/ recessed medium class PVC/MS/Floor race wayas required including necessary interconnections etc complete. , 2runs of 4Sq.mm wires with 1run of 4 Sq.mm wire , 4Runs X 10 sq. mm + 2 X 6 sq. mm earth wire in existing PVC / Floor raceways /MS Conduit , 4Runs X 16 sq. mm + 2 X 10 sq. mm earth wire in existing PVC / Floor raceways , Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt asrequired including excavation in all types of soil. , Supplying and laying following copper strip at 0.50 metre below ground as strip earth electrode, includingconnection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets(Jointing shall be done by overlapping and with 2 setsof brass nut bolt & spring washer spaced at 50mm). , 25 mm X 5 mm copper strip , 50 x 5 mm copper stripbelow ground. , Supply and Installationof 300 x 38 mm heightG.I Floor raceway including supply and installation ofJunction Boxes ,bends and fixing accessories etc complete.The scope also includes civil work for installation of Raceways i.e chipping of flooe wherever required and also laying of sand and cement mortar for alignment of Floor raceways etc complete.The minimum thickness of the floor raceways and junction boxes shall be 2 mm (Make : Legrand ) , Supply and Installationof 150 x 38 mm heightG.I Floor raceway including supply and installation ofJunction Boxes ,bends and fixing accessories etc complete.The scope also includes civil work for installation of Raceways i.e chipping of flooe wherever required and also laying of sand and cement mortar for alignment of Floor raceways etc complete.The minimum thickness of the floor raceways and junction boxes shall be 2 mm (Make : Legrand ) , Supply,Installation Testing Commissioning of following TTA PANEL.Supply, erection, testing and commissioning of 415V, 3 phase 4 wire 50 c/s Main LT Panel at Substation fully compartmentalized cubical type, as per the standards IEC61439-1&2 as tested assembly (TTA) ,tested for impulse voltage 8 KV,IP 42 fabricated CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having required capacity extensible type FP bus bars of high conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 35KA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, Form of separation shall be form 4b with metallic separation only entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars, interconnection, interlocking between feeders etc.,with indication lamps, push buttons necessary accessories, complete with following incoming and outgoing switchgears with protection and metering etc. as per specification and schematic diagram including provision to be made for interfacing with BMS etc. complete as required, with incoming & outgoing cable entry from bottom/top and bus-duct entry from top, wiring with 2.5sq. mm. FRLS insulated copper conductor , cable alleys, PLC cable gland i/c providing following switch gears All ACBs should have Ics=Icu=Icw for 1 sec All MCCBs shall be rating for 25kA (Ics=Icu). All MCCBs above 63A should be provided with Copper Spreader Terminals Marshalling Bay To Be Provided for BMS Operation Approval shall be taken for each panel before fabrication. PLC based control with 100% hot redundant PLC arrangement with touch-screen LCD / LED display board (min. 8 Diag size)along with all accessories for complete automatic, manual andHMI controls & indication. Energy Management Software wth necessary cabling shall be in scope, nos. of breaker / Meters to be connect with energy management software shall be inform by Engineer In Charge. , UPS INPUT PANEL INDOOR , Incomer , 200 A, 35KA, 4P, MCCB Should be supplied with S/C, E/F, O/CProtection.(70 - 100% Plug setting) – 1No , 2A, controlMCB - 3 Nos. , Outgoings : , 100A ,25KA 4P, MCCBs - 3 Nos , Surge Protection Device - 1 No , Bus Bar : 200 A TPN(100%)Alluminium Bus Bar-1 Set , MeteringIncomer : , 0-500V Digital Voltmeter with selector switch andMCB-1set , CT Operated Load Manager (similar to EM-6400) - 1 No , 0-200A Digital Ammeter with resin cast CTsof ratio 200/5A Class 1 Accuracy and 15VA burden and selector switch -1set , LED phase indication lamps with toggle switch -1set , UPSOUTPUT PANEL INDOOR , Incomer , 200 A, 35KA, 4P , MCCB, Should be supplied with S/C, E/F, O/CProtection.(70 - 100% Plug setting) – 1No , 2A, controlMCB - 3 Nos. , Outgoings : , 63A ,10KA 4P, MCCBs - 5 Nos , Bus Bar : 200 A TP+NAlluminium Bus Bar-1 Set , MeteringIncomer : , 0-500V Digital Voltmeter with selector switch andMCB-1set , CT Operated Load Manager (similar to EM-6400) - 1 No , 0-200A Digital Ammeter with resin cast CTsof ratio 200/5A Class 1 Accuracy and 15VA burden and selector switch -1set , Surge Protection Device - 1 No , Supply, testingand commissioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor cable. The cable shall conform to IS 7098/ Part-II. , 4C X 50Sq.mmCu Armoured Cable , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. , Above 35 sq. mm and upto 95 sq. mm , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. , Above 35 sq. mm and upto 95 sq. mm , Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. , Above 35 sq. mm and upto 95 sq. mm , Providing Indoor ordinary end terminations for thefoollwing 1.1 KV grade XLPE insulated armoured alluminium conductor cables with compression type steel gland, Bi-metallic lugs using crimping tool, Insulation tape, Identification tags etc., including end termination and Earthing of Gland with 8SWG GI Wire. , 4C X 50Sq.mmCu Armoured Cable , SUBHEAD-XVIII : SPECIAL EARTHING : , Providing and fixing of maintenance free earthing which consists of 65 MM Dia ,2.5mtr long electrode capsule,filled with earth enhancing compound,sealed at both ends and brazed lead for connection at one end suitable for direct installation at site at a depth of 2.5 mtr.Earth enhancingcompound upto a depth of 2.0 mtr around the electrode capsule and also wih brick chamber and cast Iron cover etc complete including excavation in all types of soil. , Supply and laying under ground/above ground offollowing size strips including all necessary interconnections between earth station and equipments including earth excavation, back filling, intermediate supports for strips as applicable and directed by engineer in charge. , 25 x 3 mm copper strip on DMC insulators , 25 x 3 mm copper stripbelow ground. , 50 x 5 mm copper stripbelow ground. , Supply and fixing of Static Discharge Handles made out of 40 mm dia Copper rod 600 mm Long fixed on wall with brass spacers and connected to 25 x 3 mm copper strip by brazing. , Supply, laying, jointing GI pipes of medium quality including specials of approved make fixed to wall/to the required lengths, threading jointing chasing the walls and floor, making holes, clamping of clamps and making good the same, necessary excavation, etc., complete as specifed and directed. , 50mm Dia , SUBHEAD-XIX : LIGHTNING PROTECTION : , Providing and fixing of maintenance free earthing which consists of 40mm Dia ,standrad length (as per Equipment Supplier ) electrode capsule,filled with earth enhancing compound,sealed at both ends and brazed lead for connection at one end suitable for direct installation at site at a depth of 2.5 mtr.Earth enhancingcompound upto a depth of 2.0 mtr around the electrode capsule and also wih brick chamber and cast Iron cover etc complete including excavation in all types of soil. , Supply and laying of following sizestripsincluding all necessary inter connectionsbetween earth station and equipment. supports for strips as applicable and directed by engineer in charge. , 32 X6 mm Aluminiumstrip conductor with DMC Insulator Supports , 50 X 5 mm GI strip conductor including excvation and back filling. , 25 X 5 mm Hot dip GI strip , Supply and installation of vertical air termination with 100mm dia copper hollow sphere with spikes, fixed on 1500mm length 50mm dia Class C GI pipe including all fixing accessories. , Providing and fixing of Test links for Lightning protection system. , SUBHEAD-XX: FIRE ALARM SYSTEM : , Supply, erection, testing and commissioning of Intelligent AddressableFire Alarm Control Panel(a minimum of 159 detectors/ 159 modules per loop )with Network Communication Module expandable to 2 loop, to monitor loop Devices located in allfloor with dual stage alarm facilities,built in buzzer,built in NAC Circuits & RS 485 port on CPU boardwith optional net work software connectivity, fire/fault indicators, audio-visual signals, battery, battery charger, central processing unit,80 character display unit,fibre optic converter and networking card etc complete in all respects . , 2 - Loop Panel ( One Loop for Integration ) , Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches etc complete. , Supply, Installation, Testing and commissioning of Online UPS of 1 KVA capacity with built-in SMF Batteries (12V 7Ah X 3nos) for battery back up and regulated AC supply to the FAS. , COMIBINATION/MULTI SENSOR DETECTORS(Photoelectric + Heat Sensing) , Supply, fixing, testing and commissioning of Addressable anloguetype multi sensor detectors (Photo electric + Heat sensing) with dual chamber, solid state design,Rotatable DIP Switch Setting indicating lamp, mounting base etc. . , Supply, fixing, testing and commissioning of Response Indicators with all required accessories etc complete. , Supply, fixing, testing and commissioning of Addressable anloguetype Beam Detector with transmitter and receiverincluding short circuit isolator including connections with remote test features etc complete. Range 100 Mtr , MANUAL CALL POINTS: , Supply, erection, testing and commissioning of Addressable analogue typemanual call point for indoor installtion. , Supply, Installation, Testing and commissining of Addressable analogue type manual call point stations weather proofwith 1500 mm Length ISMC 100 standing Post. , FAULT ISOLATION MODULE: , Supply, fixing, testing and commissioning ofFault Isolation module. , Supply, installation, testing & commissioning of addressable fire control module complete as required. , Supply, installation, testing & commissioning of addressable fire Monitormodule complete as required. , CABLE: , Supply, laying , testing and commissioning of 1100 V grade FIRE RESITANCE LOW SMOKE PVC insulatedcopper conductor control cables as per specification. , Armoured Twisted pair2Cx 1.5 sq. mm. shielded FRLS insulated copper conductor cable to be laid on cable tray /to be clamped to wall including supply and fixing of clamps etc complete. , Armoured Twisted pair2Cx 1.5 sq. mm. shielded FRLS insulated copper conductor cable to be laid in cable trench including excavation and backfilling. , 3 core x 2.5 Sq.mm armoured sheilded twisted pair copper conductor cable on cable tray/on wall including clamping etc complete and including cable end termination with double compression weather proof cable glands and copper lugs. , Supply and Installtion of 12 Way Elmex terminal powder Coated junction Boxincluding all terminations andNecessary Glands. , Supply, Installation, Testing and commissioning of Weather proof siren to be operated on Single Phase 230 V, 50 Hz ,A.C.Supply with a range of 2/3 km distance including fixing clamps and accessories.complete. , Supply, laying of 50mm dia, class-B GI pipe including specials of approved make fixed to wall/to the required lengths, threading jointing chasing the walls and floor, making holes, clamping of clamps and making good the same, necessary excavation, etc., complete as specifed and directed. , Supply and laying of of 6 core 9/125 micro meters armored single mode optical fiber cable with suitable dia HDPE pipe (1300nm wave length) including splicing & terminations and laid in ground at 750 mm below ground including excavation andsand, brick protection and refilling of earth and cable route markers at every 50 meters intervals. 6C SM ARM-OFC - 6 C Armoured Single Mode Optical Fiber Cable networking card and fibre optic converter etc., complete. , Supply and laying of 25mm dia, 16 SWG black enamelled M.S. conduit on wall surface/ ceiling/ floor including all accessories such as junction boxes, conduit bends, etc., complete as requiredduly coated with two coats ofred colour enamel paintetc., complete. , SUBHEAD-XXI :FIRE FIGHTING SYSTEM : , Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : , Single headed Gunmetal , Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze /gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : , 80 mm dia , 150 mm dia , Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : , 80mm dia , 150mm dia , Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : , 80mm dia , 150mm dia , Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : , Gun Metal , Supply, installtion, testing and commissioning off Hose Box to accommodate 2sets of CP hoses of 15 mtr length each and with 1 pair of Male and female coupling, and one branch pipe with nozzle. The cabinet shall be made of 16 SWG MS Sheet with double door glass front and painted with Scarlet Red colour of size 30x24. , Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : , Gun metal , Supply, Installation, Testing and Commissioning of Swinging type fire hose reel drum of Rubber hose 30mtrs length. , Supplying and fixing of fire brigadeconnectionofcast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : , 4 way - 150 mm dia M.S. Pipe , Providing, laying, testing & commissioning of C class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts,gaskets etc. in ground including welding, as supports, anticorrosive treatment with coaltar/asphalt/bitumen tape as per IS 10221, refilling the trench etc. of following sizes complete as required. , 150 mm dia. Pipe , 80 mm dia. Pipe , 50 mm dia. Pipe , Supply, errect, jointing, testing and commissioning of heavy class MS pipes (as per IS-1239). The pipes being fixed on to the wall or suspended from the ceiling/ truss with angle iron supports complete with bends, tees, flanges and with all other required accessories including painting of the pipeline with two coats of approved enamel paint over a coat of primer etc. complete. , 150 mm dia. , 100 mm dia. , 80 mm dia. , 65 mm dia. , 50 mm dia. , 40 mm dia. , 32 mm dia. , 25 mm dia. , Supply and installation , Testing andcommissioingofapproved make 15mm orifice quartzoid bulb pendent type sprinklers,68°C rating, recessed , Supply and installation, Testing andcommissioingofapproved make 15mm orifice quartzoid bulb side wallpendant type sprinklers,68°C rating. , Supply installation and fixing of flow switchesin the followingPipe line with1NO+1NC Contacts , a)150/100mm dia , Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. , In ordinary soil. , Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia , Hard rock (blasting prohibited) , Ordinary rock : , Construction valve chamber 1.8 Mtrs x 1.2 Mtrs x 1.2 Mtrs in first classbrick (table moulded) masonry in CM 1:6 on PCC bed to 100mm thick plastering with CM 1:4 internal and providing CI Cover with stiffness lifting arrangement frame work etc. complete with providing anticorrosive paint on both side for steel works.Cover should be in two halfs fixed to frame work by means of hinges. , Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : , 300 mm dia. R.C.C. pipe , Supply, laying, jointing, testing and commissioning heavy class M.S pipe (as per IS-1239) in Pump roomwithMS supports including two coats of red oxide and two coats of Red coloure enamel paint . Rate quoted shall include for necessary specials like long radius bends, tees, including cutting, welding/ flanged joints with necessary washers, nuts, bolts etc., complete. , 250 mm dia. Pipe , 200 mm dia. Pipe , 150 mm dia. Pipe , 100 mm dia. Pipe , 80 mm dia. Pipe , Supply, Installation,Testing and Commissioning of air cussion vessel ofcapacity 250 litreswith air releasevalve and ball valve. , Supply,Installation,Testing and Commissioning of PN 16Sluice valves with gateof the following sizes. , a) 250mm dia , b) 200mm dia , c) 100mm dia , Supply,Installation,Testing and Commissioning of PN 16Butterfly valves of the following sizes including flanges and hardware ,nuts and bolts etc complete. , a) 200mm dia , b) 80mm dia , Supply, Installation, Testing and Commissioning of CI Non Return valves of the following sizes. , a) 200mm dia , b)80mm dia , Supply, installation, testing and commissioning of approved make brass Y strainer with necessary flanges which should include nuts, bolts, washers, gaskets. , a) 200 mm dia. , c) 100 mm dia. , Supply,Installation,Testing and Commissioning ofelectrical control panel for diesel engine, main motor and for jockey pump comprising of following. , Incoming : 800A,50KA TPNMCCB - 1SET , 800A TPN aluminium busbars - 1set , Outgoings: , Main Fire Pump 250 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets , (with built in single phase preventor) and ON/OFF/TRIP , indication lamps for motor-2set , Jockey Pump 125 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets , Diesel Engine Control , Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification , Supply installation testing and commissioning of Instrumentation Board on type pressure gauges for pumps in delivery line and common delivery header , Supply fabrication and erection of MS angle supports for Pipe lines , Supply and fixing of G.M. ball type valves Conforming to IS , a) 25mm dia , b) 15mm dia , Supply, Installation, Testing and Commissioning of Pressure Switches. Make: Indfoss/Donfoss , Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 70 m Head with 70% of Pump efficiency. , Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 2280 lpm at 70 m Head with 70% of Pump efficiency. , Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 70 m Head , Supply, Installation of following Fire extinguishers & accessories: , CO2 6.5 kg capacity trolley mounted , CO2 22.5 kg capacity trolley mounted , DCP 5 kg capacity (potassium bi-carbonate Uria reaction) , Water buckets with stand , Sand buckets with stand , Showels , Fire Beater , Fire gong/ hand siren , Ceiling Hook , Supplying, installation, testing & commissioning of 1000 MM sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. , Supplying, installation, testing & commissioning of 1500 MM sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. , Supplying Installation Testing & Commissioning of Ceiling Mountedexit sign/emergency lighting unit uses high-performance led lamps. , Supply installation testing and commissioning of900LPM,35mtrs head Booster pump with Suitable HP 2900 RPM Electrical motor and coupling as per TAC regulations with necessary accessory including base plate of MS channel and suitable reinforced CC foundation with nuts andbolts , Supply, installation, testing and commissioningof weather proof type MPCB box made out of 2mm thick CRCA sheet including painting with epoxypowder coating for Suitable HPBooster pump motor. The box shall be suitable for terminating AYFY cable ofsuitable angle frame work of 450mm height on a PCC pedestal including all materials Outgoings : DOL starter for 15HP with MPCB and contractor, over load relay, single phasing preventor and ON/OFF/TRIP , SUBHEAD-XXII: WATER COLLERS , Supply and fixing of 40 (cooling)/ 80 (storage) ltrswater cooler with water purifier (RO system) and voltage stabilizer etc. complete. , SUBHEAD-XXIII :LIFTS : , Supply, erection, testing and commissioning ofMachine room less gear less 1000Kgs Goods liftwith a speed of 0.75 meters per second,suitable for (Ground + 2floors) floors operation with 3 phase ACVVVF drive of suitable HP to operate on 415 volts 50 HZ with base including 1100X 1300X2300 mm car made of all stainless steel body, heavy duty cabin suitable for one number car entrance and landing entrance doors ( Center operated doors ) , SS hairline finish , with clear opening of 800x2100mmn height suitable for simplex selective and collective operation with or without attendant including call register and other parameters as per specification , SUBHEAD-XXIV : EOT CRANES , Design, Manufacture, supply , erection, testing and CommissioningofTandem operator (1 set consist of 2 nos of cranes)DoubleGirderNon FLPEOT Cranewithall speeds VVVF drivecontrol and micro speed arrangement for hoist, CT & LT and confirming to IS 807/IS 3177 /4137cand other relevant IS standards of the latest revisions as shown below complete with all taxes, duties and other charges such as transportation to site, loading and unloading at stores / building, where to be installed etc., movement of material to work spot including the cost of paint as required loaded testing at factory and at site. The crane shall be designed for earthquake and sesmic qualification.Span to be measured by the the Bidder at Site and it shall be its sole responsibility to provided Spansuitable . Design drawings and list of materail to be submitted to department duly approved checked by Govt., agency/ reputed technical institute as approved by department. VVVF drive controls with along travel andcross travel movement and with pendent control opeartion as per IS807 &IS3177(includingfestool cable, 60 lb rails, third party inspection, transportation, design proof check)Double Girder Box Type. 25% overload ,Duty class- III, head Room 2.5mtr,side clearence 300.indoor operation.AC Control Supply , Floor operated via pendant push button,All drives should be provided with alternative parallel path with DOL starter for Main Speed only , MOTORS- Conformingto IS 325-1978& 900-1965, , GEAR BOX- Electro Hydraulic Thrusters type,3Ph, 440V, A.C. Conforming with IS 3938 - 1983 , WIRE ROPE- 6X 36 Cont. Hempcore(IS 2365-1963) , Rope Drum- made from Seamless/ms rolled , Hook- Forged Material EN-3A , WHEEL ASSEMBLY- Made from forged steel- Double flange hardened to BHN 275 Conforming with IS 807-1976. , BEARING- All bearings are of anti Friction Ball/ Roller Conforming, with IS 6455-1972 , COUPLING- AlI Couplings will be Geared Coupling , SHAFT-All Shafts will be of EN - 9 , RESISTANCE BOXES- AlI resistance boxes will be stainless steel, Wire grid and 15 min. Rated heavy duty, (IS 1822 -1967 ) , LIMIT SWITCH- Rotary Limit Switch for Hoisting & Lever Type for L.T &C.T. Conforming with IS- 3936 - 1983 , PANEL BOXES - All panel boxes will be of steel febricated , CONTROL TRANSFORMER- 750 VA, 44OV / LLOV. , POWER CONTROL CABLE -Sheet Metal housing, DustlVermin Proof having BCH/Siemens Contactors & Overload ReIays BCH time delay Relay , PAINT- Two coats of Red Primer & Two coats of Golden Yellow. , Fullplatform on driving side & two small platform on non driving side.(Monkey ladder &side railing shall be provided by civil) , PART- I : SUPPLY , Supply of Non-FlameproofTandem Operated ( 1 set consist of2 Nos of 5 Ton capacity cranes) 5 Ton capacityDoubleGirder Crab type EOT Crane with VVVF drive complete with long travel and cross travel movements as per technical specifications and as per IS: 807 / IS: 31774137 and other relevant IS standards of the latest revision.All drives should be provided with alternative parallel path with DOL starter for Main Speed only. Span:14.5 mts. ± 0.5 mtrs.to bechecked as per site condition ± Lift: 8.5 mts. Bay length: 73± 0.5 mtr (to bechecked as per site condition ± , Crane operating speeds , Main speed Micro speed , Main hoist:2.5m/min 0.25m/min , Cross travel :10m/min1.0m/min , Long travel: 15m/min 1.5m/min , Micro speedfor all motions : 10% of main speed through VVVF drives. , Provision of inching is to be incorporated in the drives. , Supply of shrouded bus bar system with double shoe copper current collections system complete with support tracks, cable loops, junction boxes and cable from main supply point to crane festoons with all necessary fixtures etc completeas per site condition (For 5 ton capacity crane as per above BOQ EOT 1.1) , Supply of material for Gantry Rails section 60 lb of prime material in length of 10 mts and above complete with mounting arrangement at the building over the crane girder including painting of rails with approximate colour code as approved by the dept as per site condition(For 5 ton capacity crane as per above BOQ EOT 1.1) , Supply of Non-FlameproofTandem Operated ( 1 set consist of2 Nos of 2 Ton capacity cranes) 2 Ton capacityDoubleGirder Crab type EOT Crane with VVVF drive complete with long travel and cross travel movements as per technical specifications and as per IS: 807 / IS: 31774137 and other relevant IS standards of the latest revision.All drives should be provided with alternative parallel path with DOL starter for Main Speed only. Span:17.5 mts. ± 0.5 mtrs.to bechecked as per site condition ± Lift: 5.5 mts. Bay length: 17.5± 0.5 mtr (to bechecked as per site condition ± , Crane operating speeds , Main speed Micro speed , Main hoist:2.5m/min 0.25m/min , Cross travel :10m/min1.0m/min , Long travel: 15m/min 1.5m/min , Micro speedfor all motions : 10% of main speed through VVVF drives. , Provision of inching is to be incorporated in the drives. , Supply of shrouded bus bar system with double shoe copper current collections system complete with support tracks, cable loops, junction boxes and cable from main supply point to crane festoons with all necessary fixtures etc completeas per site condition (For 2 ton capacity crane as per above BOQ EOT 2.1) , Supply of material for Gantry Rails section 50 mm sqr barof prime material in length of 10 mts and above complete with mounting arrangement at the building over the crane girder including painting of rails with approximate colour code as approved by the dept as per site condition(For 2 ton capacity crane as per above BOQ EOT 2.1) , Part-II: - ERECTION, TESTING AND COMMISSIONING , Erection, testing and commissioning ofNon FLP EOTTadem Opereated followingDouble Girder EOT Cranesincluding loaded testing and others mentioned in item S.No.EOT-1.1 to EOT-2.3 of Part-I as per the relevant IS standards and as mentioned in the technical specifications. , Erection, testing and commissioning ofNonFlameproof Tadem Opereated Double Girder EOT Cranes of 5 Ton capacity( 1 set consist of2 Nos of 5 Ton capacity cranes) mentioned in Items .No.EOT-1.1of Part-I with VVVF drive complete with long travel and cross travel movements as per technical specifications and as per IS: 807 / IS: 3177 and other relevant IS standards of the latest revision.including loaded testingAll drives should be provided with alternative parallel path with DOL starter for Main Speed only. Span:14.5 mts. ± 0.5 mtrs. Lift: 8.5 mts. Bay length: 73± 0.5 mtrto bechecked as per site condition ± , Erection testing and commissioning of shrouded type current collection system complete as per the item Sl No.EOT-1.2 of Part I over the crane bay including tapping of supply for electrical panel testing & handing over the crane as per the approved QA plan etc complete as per site condition. , Erection, testing & commissioning of Gantry rail section 60 Lb mentioned in item Sl No.EOT-1.3 of Part -I with mounting arrangementand fixing hardware etc., complete over the bay length to match the span of the crane within the permissible accuracy levels for span in height variation as per the QA Plan etc complete as per site condition. , Erection, testing and commissioning ofNonFlameproof Tadem Opereated Double Girder EOT Crane of( 1 set consist of2 Nos of 2 Ton capacity cranes)mentioned in Items .No.EOT-2.1of Part-I with VVVF drive complete with long travel and cross travel movements as per technical specifications and as per IS: 807 / IS: 3177 and other relevant IS standards of the latest revision.including loaded testingAll drives should be provided with alternative parallel path with DOL starter for Main Speed only. Span:17.5 mts. ± 0.5 mtrs. Lift: 5.5 mts. Bay length:17.5± 0.5 mtrto bechecked as per site condition ± , Erection testing and commissioning of shrouded type current collection system complete as per the item Sl No.EOT-2.2 of Part I over the crane bay including tapping of supply for electrical panel testing & handing over the crane as per the approved QA plan etc complete as per site condition. , Erection, testing & commissioning of Gantry rail section 50 mm sqr barmentioned in item Sl No.EOT-2.3 of Part -I with mounting arrangementand fixing hardware etc., complete over the bay length to match the span of the crane within the permissible accuracy levels for span in height variation as per the QA Plan etc complete as per site condition. , Supply of Test loads of 5 Ton along with Slings and D-shakles (Suitable for 5 Ton, loads of 5 ton -1 no, 1 ton-1 nos, 0.25 ton -1 nos , Supply of Test loads of 2 Ton along with Slings and D-shakles (Suitable for 2 Ton, loads of 2 ton -1 no, 0.5ton -1 nos , SUBHEAD-XXV : BOOM BARRIER: , Supply,Installation,Testing and commissioning of 6 mtr length Boom Barrier electromechanical hydraucally operatedopening and closing times can be adjusted between 3 to 6 seconds and speeds can be adjusted seperately through hydraulic adjusters in a closed circuit system optional emergency close option 2 seconds shall be available with 100% duty cycle with power supply unit,photo sensors,flashing lights on the boom ,push button for entry,exit & Remote control.This shall be along with safety features like Induction and safety loop etc with remote operating facility with remote control unit,along with 4 nos of photo cells with each boom barrier.The system shall be complete in all respects along with all fixing accessories and civil works , SUBHEAD-XXVI :ROADS/HARDSTANDING & DRAINS : , Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. , Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in all kinds of soils. , Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. , Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. , 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. , Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.With rapid setting bitumen emulsion. On W.B.M / W.M.M. @ 0.4kg/Sqm. , Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. , Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). , SUBHEAD-XXVII :EXTERNAL WATER SUPPLY SERVICES: , Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. , 25 mm dia nominal bore , 40 mm dia nominal bore , 50 mm dia nominal bore , 100 mm dia nominal bore , Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : , 50 NB , Making connection of G.I distribution branch with G.I mainof folloeing size by providing and fixing tee, inclding cutting and threading the pipe etc. complete: , 25 to 40 mm nominal bore , 50 to 80 mm nominal bore , Providing and fixing gun metal non- return valve of approved quality (screwed end) : , 25mm nominal bore , 40 mm nominal bore , 50 mm nominal bore , Supply,erection, testing and commissiong of C.I Air release valves flanged end type with bolts,nuts and rubber insertions etc., complete andof following sizes: , 25mm nominal bore , 50 mm nominal bore , Supply and Fixing of cast iron pipe line Route Marker for water supply Network system , Borewells , Geological Survey by specialist Agencies and submitting the report for number of poit surved and yield available , Drilling and developing of 61/2 inch dia Bore Wells by DTH method in any type of soil, Conducting yield test as per V Notch method and submission of yield report, including filling of filter media clamps, MS Cover etc., complete. , a) 0-60 mtrs , b) 61-100 mtrs , c) 101-200 mtrs , Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm Dia. , Providing HDPE pipe PE-80 grade (12.5 kg/ sq.cm) of 63 mm OD for bore wells. , Supply, erection, testing and commissioning of 3 Cu.m/hr at 70 m head submersible pump set 3Phase-415V, 50 Hz, 2 HP/ 12 stages, 2900 rpm as approved by Engineer in charge at site.(As per depth of base) , Supply, erection, testing and commissioning of Gun metal Check valve (Non return valve PN-10) conforming to IS 778 with screwed ends type with bolts, nuts and rubber insertions etc., complete and of following sizes: , a)50 NB , Supply, erection, testing and commissioning of Brass / GM / Bronze Air Release valves with threaded ends of following sizes: , a) 25 NB , Supply, erection, testing and commissioning of pressure gauges with range of 0-10 bar along with isolation cock and pipe for bore wells. , Supply, installation, testing and commissioning of weather proof type box (IP-55) made out of 2 mm thick CRCA sheet including painting with epoxy powder coating. The box shall be consisting of star-delta starter suitable for 3 Cu.m/hr and 200 meters head pumpmotor with MPCB, contactor, overload relay, ON/ OFF push button. ON/ OFF/ TRIP indications. Ammeter with resin cost Cts and selector switch, Voltmeter with selector switch. The box shall be suitable for terminating suitable cable. The box shall be mounted on suitable angle frame work of 450 mm height on a PCC pedestal including all materials, complete. , Providing maintenance free Earth station with consisting of 40 mm dia pipe standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5 mtrs. Bentonite compound (as per equipment supplier) upto a depth of 2.0 meters around the electrode capsule. Brick chamber & CI Cover complete. , Supply and laying of following size strips including excavation and refilling of each when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and equipments. , a) 25 x 5 mm hot dip galvanized iron strip , b) 8 SWG GI Wire , Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m in All kinds of soils , Supply, Laying, testing and commissioning of Medium grade G.I. Pipes conforming to IS 1239 Part - I including all necessary fittings etc., complete for sizes , a) 65 NB (Borewell to sump) , b) 50NB (Borewell) , c) 40NB (Borewell to sump) , d) 32NB , e) 25NB , Supply, Erection, testing and commissioning of Cast Iron Butterfly valves (Wafer type) (PN-10) above nd upto 50mm dia with necessary flanges, bolts, nuts etc., and gun metal gate valves from 40mm dia and below , a) 65NB(GM Gate Valve) , b) 50NB(GM Gate Valve) , c) 40NB(GM Gate Valve) , d) 32NB (GM Gate Valve) , e) 25NB (GM Gate Valve) , Constructing of Valve Chamber of size 750 x 750 x 1000mm deep comprising of 230mm thick brick walls in cement mortar 1:5 over a bed of 150mm thick PCC 1:4:8 alround beyond the masonry faces plastered with CM 1:3 mixed with approved water proofing compound as per manufacturers specifications, 13mm thick on internal, external, top surfaces, finished smooth with a floating coat of neat cement, providing and fixing painted light duty double seal CI frame and cover of size 600 x 450mm weighting not less than 52 kgs conforming to IS 1726 with locking arrangements, fixing the frame in RCC 1:2:4 including fabrication, form work, curing etc., complete all as specified and directed. , Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete (a) 50 to 80 mm nominal bore: , Providing and fixing gun metal non- return valve of approved quality (screwed end) :Vertical (a) 50 mm nominal bore . , Supply, laying and commissioning of following size 1.1KV grade PVC insulated flexible Copper conductor in the bore withall installation materials. The cable shall conform to IS 694 , a) 3C x4sqmm (copper ), pvc Flat Water proof cable. , Conducting water yield test without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. , Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. , 200mm clamp , SUBHEAD-XXVIII : EXTERNALELECRIFICATION , 11KV HT SWITCHGEAR INDOOR , Supply,Installation,Testing and commissioning ofthe following indoor floor mounted 11kv Rated VCB Panel in Metal Enclosure fabricated out of 14 swg sheet steelto be operated on 11KV,Three phase,50HZA.C Power supply .The panel is to be compartmentalised with individual compartments for Bus bars, Cable and CTs and Instrument and relay control Panel. The VCBshall behorizontal draw out single breakas per IS 13118.The short circuit fault level of the system shall be 350MVA- Indoor , 11 KV- H.TSWITCH GEAR PANEL - INDOOR , 11KV VCB panel withone noof1250A vcb -Indoor as Incomer and 3 Nos 800A VCB as out goings. , 11 KV H.T Switch Gear Panel (INDOOR TYPE) With 1 No. OF 1250 Vaccum Circuir breakerasIncomer. , CONSTRUCTION - The Switch Gear Panel shallbe compartmentalised Designed with cubicles fabricatedout of High Quality Sheet Steel. The panels shall be designed having the Following Segregations separately. , a) Busbar compartment , b) Cable and CT compartment , c)) Instrument and Relay Compartment , The clearances between phase to phase and phase to earth shall be provided in accordance with the relevant standards. The bus bars shall be supported by bus support insulators placed at regular intervals. , The panels shall be powder coated with epoxy base paint to give an aesthetically pleasing appearance. The paint shade shall be as per the requirement. , SAFETYFEATURES: , a) Mechanical Interlock and earth switch for out goings , b) Door interlock in service position. , INCOMING VCB PANEL , 11 , KV, 1250A, 26.2 KA,Horizontal Draw out type Vaccum Circuit breaker withmotor/manual spring charge mechanism and also with mechanical indications for breaker on /off/trip indications and also with Local Remote selector switch and with breaker TNC Switch. , CURRENT TRANSFORMER: (3 No’s) Cast Resin , Ratio 200-100- 5/5 A, Core 1: 15 VA, CI – 0.2 for Metering and 5P10 for protection. , METERING: ( 1set) , 96 Sq.mm Digital Ammeter with selector switch Digital type 0-200A. , POTENTIAL TRANSFORMER: (3 No’s) Cast Resin , Ratio 11000 V/ rt 3 / 110 v / rt 3 , 100 VA, CI – 0.2 for Metering and 3 P for Protection and also with 2 numbers of Under Volage relays. , OUTGOING VCB PANEL , 11 , KV, 800A, 26.2 KA,Horizontal Draw out type Vaccum Circuit breaker withmotor/manual spring charge mechanism and also with mechanical indications for breaker on /off/trip indications and also with Local Remote selector switch and with breaker TNC Switch.-Outgoing-4Nos , CURRENT TRANSFORMER: (3 No’s) Cast Resin , Ratio 75 /5 A, Core 1: 15 VA, CI – 0.2 for Metering and 5P10 for protection. , METERING: ( 1set) , 96 Sq.mm Digital Ammeter with selector switch Digital type 0-100A. , Digital Multi function Meter for KW,KWH,KVA, KVAR , COS PHI Parameters reading. , INDICATION LAMPS: , 1) TCH, Battery failure , Spring charge, discharge, ON, OFF and Trip Indication Lamps, Phase indication Lampsfor RYB.-(1 set) , CONTROL SWITCHES/PUSH BUTTON , Bus Bar with 1250 Amps Copper- (1 set) , COMMON FOR SWITCHGEAR: , Heater ON and OFF Switch with Space heater, single Phase switch socket and cubicle lamp for panel illumination, MCBs for AC/DC Control - (1 set) , MS sheet enclosure suitable for Indoor installation withoutgoing cable entry.- (1 set) , RelaysIncomer ; Undervoltage relays 2 nos,IDMT relay ,TCH and Master trip relay and also with 12 window annunciator , Power Pack - 1 No with necessary Interconnections. , Supply andcommissioning of 11KV earthed HT cable of size3 c x300 sqmm XLPE insulated armoured alluminium conductor cable as per IS 7098- Part 2 - 1983 , Supply andcommissioning of 11KV earthed HT cable of size3 c x185 sqmm XLPE insulated armoured alluminium conductor cable as per IS 7098- Part 2 - 1983 , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. , Above 120 sq. mm and upto 400 sq. mm , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. , Above 120 sq. mm and upto 400 sq. mm , Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size on cable tray as required. , Above 120 sq. mm and upto 400 sq. mm , Supply, Installation, Testing and commissioning of 11 KVearthed heat shrinkable end termination kit of 11 KV earthed XLPE insulated armoured alluminium conductor HT Cable of size 3 c x 300sqmm ( Indoor Termination Kit). , Supply, Installation, Testing and commissioning of 11 KVearthed heat shrinkable end termination kit of 11 KV earthed XLPE insulated armoured alluminium conductor HT Cable of size 3 c x 185sqmm ( Indoor Termination Kit). , Supply and Installation ,Commissioning of HT Straight through Joint Kit for 3 C x 300 Sqmm EarthedXLPE insulatedarmoured alluminium conductor cable. , Supply, Installation, Testing and commissioning of 1000KVA, 11kv / 433 v, 3 PHASE, 50 Hz, Dyn 11 ,outdoorANAN Resin cast dry typeTransformerwithon load tap changer, RTCC panel, AVR andHT Side marshalling box for termination of 11 kv grade , 3 c x 300 sqmm XLPEinsulated alluminium conductor screeened cable and LT side provision for connecting sandwich type of Alluminium bus trunking system of 1600 A capacityas per IS 11117 etc , LT SANDWICH TYPE BUS DUCT , Supply, Installation, Testing and commissioning of 415 V, 50 Hz, A.C, 1600 A, Three phase and neutral Sandwhich type Alluminium bus bars Bus trunking system with necessary fixing Clamps and Jointing accessories including all required horizontal and vertical bends, tees for outdoorApplicationIp -65( Transformer feeder Incomer ) .As p-er IS ; 8623 Part 1 & 2. , M.V.PANELS , Supply,Installation Testing Commissioning of following TTA PANEL.Supply, erection, testing and commissioning of 415V, 3 phase 4 wire 50 c/s Main LT Panel at Substation fully compartmentalized cubical type, as per the standards IEC61439-1&2 as tested assembly (TTA) ,tested for impulse voltage 8 KV,IP 42 fabricated CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having required capacity extensible type FP bus bars of high conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 35KA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, Form of separation shall be form 4b with metallic separation only entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars, interconnection, interlocking between feeders etc.,with indication lamps, push buttons necessary accessories, complete with following incoming and outgoing switchgears with protection and metering etc. as per specification and schematic diagram including provision to be made for interfacing with BMS etc. complete as required, with incoming & outgoing cable entry from bottom/top and bus-duct entry from top, wiring with 2.5sq. mm. FRLS insulated copper conductor , cable alleys, PLC cable gland i/c providing following switch gears All ACBs should have Ics=Icu=Icw for 1 sec All MCCBs shall be rating for 25kA (Ics=Icu). All MCCBs above 63A should be provided with Copper Spreader Terminals Marshalling Bay To Be Provided for BMS Operation Approval shall be taken for each panel before fabrication. PLC based control with 100% hot redundant PLC arrangement with touch-screen LCD / LED display board (min. 8 Diag size)along with all accessories for complete automatic, manual andHMI controls & indication. Energy Management Software wth necessary cabling shall be in scope, nos. of breaker / Meters to be connect with energy management software shall be inform by Engineer In Charge. , MAIN MVPANEL - 1- Indoor , Incomer 1,3,4 : 3 Nos of 1600 A, 4P. EDO ACB, 50KA,shallbe supplied with S/C,E/F,O/C AND INSTANTANEOUS TRIP RELAY UNIS WITH TIME DELAY SETTINGS. , 2A, control MCB - 9 Nos. , RYB indicating lamps - 3 sets , Voltmeter (0-500V) with selector switch - 3 sets , Ammeter (0-1600A) with selector switch - 3 sets , 1600/5A, CL-1, 15VA CTs with resin cast- 3 nos. , A Single CT with ratio of1600 / 5 A , 15 VA, 5 P 10 ,CT for feeding APFC relay of APFC panel. ( For 3 Nos of Incomers ) , Bus Coupler : 3 Nos of 1600 A, 4P. EDO ACB, 50KA,shallbe supplied with S/C,E/F,O/C AND INSTANTANEOUS TRIP RELAY UNIS WITH TIME DELAY SETTINGS. , Incomer 2 : 1 No of 1250 A, 4P. EDO ACB, 50KA,shallbe supplied with S/C,E/F,O/C AND INSTANTANEOUS TRIP RELAY UNIS WITH TIME DELAY SETTINGS. , 2A, control MCB - 3 Nos. , RYB indicating lamps - 1 sets , Voltmeter (0-500V) with selector switch - 1 sets , Ammeter (0-1250A) with selector switch - 1 sets , 1250/5A, CL-1, 15VA CTs with resin cast- 1 nos. , A Single CT with ratio of1250 / 5 A , 15 VA, 5 P 10 ,CT for feeding APFC relay of APFC panel. , Outgoing , 1250A, 3P, 50KA, EDO ACB - = 2 Nos , 800A, 3P, 50KA, EDO ACB - = 3 Nos , 630A, 3P, 50KA, EDO ACB - = 3 Nos , 250A, 3P, 35KA, MCCB, -=1 No , 200A, 3P, 35KA, MCCB, -=1 No , 160A, 3P, 25KA, MCCB, -=2 Nos , 63A, 3P, 16KA, MCCB, -=3 Nos , Surge Protection Device - 1 No , 63 A, 3P, 16KA, MCCB, -= 1 No and also with 20 A TPNMCB as outgoings 3 Nos with timer circuit for controlling of street lights and the timer should be with required24 hors clock settings. , Bus Bars : 1600A, 3Ph, 4 wireTPN , 50Hz, aluminium bus bars , Metering Instruments ; Load Manager in the Incomer and ACB/ MCCB on , off , Trip Indication Lamps and with Breaker Status indication Lamps and also with Phase indication Lamps. , Earth Bus; To be provided at the bottom of the Panel of Gi Strip , MAIN BUILDING PANEL- INDOOR , Incomer: 1 No of 1250 A, 4P. EDO ACB, 50KA,shallbe supplied with S/C,E/F,O/C AND INSTANTANEOUS TRIP RELAY UNIS WITH TIME DELAY SETTINGS. , 2A, control MCB - 3 Nos. , RYB indicating lamps - 1 sets , Voltmeter (0-500V) with selector switch - 1 sets , Ammeter (0-1250A) with selector switch - 1 sets , 1250/5A, CL-1, 15VA CTs with resin cast- 1 nos. , A Single CT with ratio of1250 / 5 A , 15 VA, 5 P 10 ,CT for feeding APFC relay of APFC panel. , Outgoing , 630A, 3P, 50KA, EDO ACB - = 2 No , 630A, 3P, 50KA, MCCB - = 2 Nos , 250A, 3P, 35KA, MCCB, -=3 Nos , 200A, 3P, 35KA, MCCB, -=2 Nos , 63A, 3P, 16KA, MCCB, -=3 No , Surge Protection Device - 1 No , Bus Bars : 1250A, 3Ph, 4 wireTPN , 50Hz, aluminium bus bars , Metering Instruments ; Load Manager in the Incomer and ACB/ MCCB on , off , Trip Indication Lamps and with Breaker Status indication Lamps and also with Phase indication Lamps. , Earth Bus; To be provided at the bottom of the Panel of Gi Strip , APFC PANEL INDOOR TTA PANEL - 300KVAR , Supply,Installation,Testing andCommissioning of APFC PANEL with Automatic power factor control relay and with 2 nos of 50 kvar capacitor banks and 25 kvar capacitor banks 8 nos with the following incoming and out goings.. The Panel is to be installed in Indoor. The panel is to be supplied with necessary power and control wiring required for the automatic operation of Power factor control. , INCOMER , 630 A, 4 P , 50KA MCCB with O/c, S/c,E/f Protection Microprocessore Relay Unit , 2A, control fuse - 3 Nos. , RYB indicating lamps - 1 set , Voltmeter (0-500V) with selector switch - 1 set , Ammeter (0-630A) with selector switch - 1 set , 630/5A, CL-1, 15VA CTs with resin cast- 3 nos. , Outgoing , 125 A, 3P, SDF , - 2No , 63 A, 3P, SDF , - 8 No , Bus Bars : 630A, 3Ph, TPN, 50Hz, aluminium bus bars , Metering Instruments ; Multi Function Meter in the Incomer and SDFon , off , TRIP Indication Lamps and with Breaker Status indication Lamps and also with Phase indication Lamps , Earth Bus; To be provided at the bottom of the Panel of copper , The panel is to be supplied with Required capacity Capacitor Banks as per BOQ quantity and also with required capacity over load relays,contactors ,Switch disconnecting fuses and also with APFC relay control wiring for manual and Auto operation. , EARTHING , Providing and fixing of maintenance free earthing which consists of 40 mm Dia, 3 mtr length (as per Equipment Supplier) electrode capsule,filled with earth enhancing compound,sealed at both ends and brazed lead for connection at one end suitable for direct installation at site at a depth of 2.5 mtr.Bentonite compound upto a depth of 2.0 mtr around the electrode capsule and also wih brick chamber and cast Iron cover etc complete including excavation in all types of soil. , Providing and fixing of maintenance free earthing which consists of 65 mm Dia, 3 mtr length (as per Equipment Supplier) electrode capsule,filled with earth enhancing compound,sealed at both ends and brazed lead for connection at one end suitable for direct installation at site at a depth of 2.5 mtr.Bentonite compound upto a depth of 2.0 mtr around the electrode capsule and also wih brick chamber and cast Iron cover etc complete including excavation in all types of soil. , Supply and fixing of following earth strips/ conductors.The scope incudes supply and fixing of copper lugs wherever found necessary, brass bolts, nuts and washers for fixing arrangement etc., (from earth station to main panel). , 50x5 MM G.I.Flat , 25 x3 MM GI Flat , 50 x 6MM Copper Flat , 6SWG G.I.Wire , Cable Trays , Supply and fixing of following size GIPerforated type cable tray made out of 2mm thick sheet including MS supports for fixing the tray, anchor fasteners etc complete as required.Including with GI covers. , 600mm wide , 300mm wide , SAFETY ITEMS , Supply, Installation, Testing and commissioning of the Follwing Safety itemsas per standrads and specification. , Fire Extinguishers- 5 KG CAPACITY CO 2 Confirming to IS 2878 fitted with discharge bend pipe and horn , Rubber Mats 11 KV , 2 Mtr x 1 Mtr , Rubber Mats 415 V , 2 Mtr x 1 Mtr , Shock treatment Chart with frame and glass , First Aid Box , Sand Bucket with stand with 3 Nos of buckets and also with canaopy. , 415 V Danger Boards , 11 kv Danger Boards , Single Line Diagram with frame and glass. , Supply, testingand commissioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor cable. The cable shall conform to IS 7098/ Part-II. , 3.5C X 400Sq.mm , 3.5C X 300Sq.mm , 3.5C X 240Sq.mm , 3.5C X 185Sq.mm , 3.5C X 150Sq.mm , 3.5C X 95Sq.mm , 3.5C X 70Sq.mm , 3.5C X 50Sq.mm , 3.5C X 25Sq.mm , 4C X 16Sq.mm , Copper armoured control cables , i) 4C X 2.5Sq.mm , ii) 7C X 2.5Sq.mm , iii) 19C X 2.5 Sq.mm , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. , Upto 35 sq. mm , Above 35 sq. mm and upto 95 sq. mm , Above 95 sq. mm and upto 185 sq. mm , Above 185 sq. mm and upto 400 sq. mm , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. , Upto 35 sq. mm , Above 35 sq. mm and upto 95 sq. mm , Above 95 sq. mm and upto 185 sq. mm , Above 185 sq. mm and upto 400 sq. mm , Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. , Upto 35 sq. mm , Above 35 sq. mm and upto 95 sq. mm , Above 95 sq. mm and upto 185 sq. mm , Above 185 sq. mm and upto 400 sq. mm , Providing Indoor ordinary end terminations for thefoollwing 1.1 KV grade XLPE insulated armoured alluminium conductor cables with compression type steel gland, Bi-metallic lugs using crimping tool, Insulation tape, Identification tags etc., including end termination and Earthing of Gland with 8SWG GI Wire. , 3.5C X 400Sq.mm , 3.5C X 300Sq.mm , 3.5C X 240Sq.mm , 3.5C X 185Sq.mm , 3.5C X 150Sq.mm , 3.5C X 95Sq.mm , 3.5C X 70Sq.mm , 3.5C X 50Sq.mm , 3.5C X 25Sq.mm , 4C X 16Sq.mm , End terminations of Copper armoured control cables including supply and fixing of crimping type copper lugs. , i) 4C X 2.5Sq.mm , ii) 7C X 2.5Sq.mm , iii) 19C X 2.5 Sq.mm , SUBHEAD-XXIX : AREA LIGHTING : , Supply and erection of steel stepped and swaged tubular poles of 9 mtr long(410 SP25) (1.5 mtr below ground) with base plate earthing studs 1.5 mtr out reach single /Double arm , FRP terminal Box 2 Nos of 40 mm Dia Class B G.I Pipe ,0.5 mtr Longfor incoming and outgoing cables including excavation in all types of soil ,PCC 1:2:4 ,PCC Pedestal with painting with black bitumen paint inside the coping for embedded portion and two coats of Zinc chromite primer and two coats of Alluminium paint externally for length above the ground.The pole shall be with FRP junction box consisting of 10A MCB.The wiring from Junction box to Light fixture shall be carried out with 3 Core 2.5 Sqmm Copper conductor flexible cable. , The Street Light Pole shall be fixed with 70W LED street Light fixture including supply of controlgear / driver and lamp(Make : Cat No.LR02-102-XXX-57-G2,WIPRO MAKE / CAT NO - Greenline V2 (BRP410) Philips/equivalent make.) , Supply and erection of 65 mm Dia, Class B GI Pipe of 3 mtr. long with base plate, earthing studs, 3 phase and neutral loop-in and loop-out box as per specifications, 2nos 50mm dia,1.5mtr. long GI bent pipes for incoming and outgoing cables, including excavation , 1 :2 : 4PCC Pedestal etccomplete. The pole shall be with Junction box consisting of MCB.The Junction box shall be of weather proof. The wiring from Junction box to Light fixture shall be carried out with 3core 2.5sq.mm flexible copper conductor cable. The Pole shall be fixed withweather proof 72W LED ( Philips Cat No :BRP046 LED 30 CW MR S1 PSU GR/equivalent) Light fixtureincluding supply of driver and fixing clamps etc complete. , Supply, testingand commissioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor underground cable. The cable shall conform to IS 7098/ Part-II. , 4Core10sq.mm , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required , Upto 35 Sqmm , Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. , Upto 35 Sqmm , ProvidingEnd terminations for the following size of 1.1 KV grade XLPE insulated armoured alluminium conductorcablewith compression type steel gland, alluminumlugs using crimping tool, Insulation tape, Identification tags etc.,complete , 4Core 10 sq.mm , Providing Spiral coil earthing with 8 SWG GI wire including spreading of salt and charcoal as per IS 3043/87 with latest amendments. , Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, weather proof MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powderpainted including earthing etc. as required. (But without MCB/RCCB/Isolator) , 4 way (8 + 12), Double door , Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuitbreaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. , 40A , Supplying and fixingof 6A to 32A rating 240/415V,10kA , C Curveminiature circuit breaker suitable for inductive load of following polesin the existing MCB DB complete with connections ,testing and commissioning etc complete. , Single Pole , Supply and Commissioning of thefollowing type Fluorescent/ Compact fluorescentlight fixtures on wall/ Ceiling including all fixing accesssories such as leads, etc complete as required. The Fluorescent/CFL fixtures shall be complete with Low loss copper ballast PF improvement capacitor, Bipin Rotor type lamp holder,starter, starter base, all prewired upto the terminal block. All fixtures shall besupplied with lamps. The Catalogue Numbers refers to Philips Make. , 40 W Bulk Head Light Fixture Outdoor , (PhilipsCat No WT1 40W LED 7S NW PSU S1 PC /Equivalent as per approved makes)) , 150WLED Flood Light Fixture outdoor with alluminium die cast housing and also includind driver with fixing clamps etc complete , (PhilipsCat No BVP283 LED240 CW FG SY5NB 200W V1 /Equivalent as per approved makes)) , Installtionof Fluorescent/ Compact fluorescentlight fixtures on wall/ Ceiling including all fixing accesssories such as leads, etc complete as required. , SUBHEAD-XXX :SEWAGE DISPOSAL : , Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m in All kinds of soils. , Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. , PVC SWR PIPES , Providing, laying and jointing PVC/ SWR Pipes conform to IS:13592-1992 of Type-B on sand cushion at bottom and around the pipw and testing of joints etc. complete : , 100 mm dia PVC/SWR Single Socket , 150 mm dia PVC/SWR Single Socket , Providing and fixing square-mouth PVC gully trap conform to IS:13592-1992 complete with brick masonry chamber around as per standard design : , 100x100 mm PVC Gully trap with Sewer bricks conforming to IS : 13592-1992. , Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : , Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), With Sewer bricks conforming to IS : 4885. , Extra for depth for manholes : , Size 90x80 cm, With Sewer bricks conforming to IS : 4885 , Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design, With 20x20 mm square bar. , Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design, With common burnt clay F.P.S. (non modular) bricks of class designation 3.5. , Supply and positioning of ready made polyethylene septic tank of size 2.3M long 1.3M dia 16mm shell thickness with 2/3 chambers and 2Nos manholes of size 550mm dia and 100mm/160mm dia inlet outlet pipe and airvent pipe 50mm dia of make United Septic tank Design Reg.No 173352 Type-4 , SUBHEAD-XXXI : ARBORICULTURE : , TREE PLANTATION , Digging pits in all type of soils and refilling the same with the good earth (excavated / imported) & manure (organic manure/cow dung/sludge) in the ratio of 3:1 (03 part of stacked volume of manure). Cost of manure / sludge and good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth &8% stacked volume of manure. Each pit to be mixed with antitermite chemical / granules, Thimet 10G @100-200 am/pit , (I) AVENUE / FLOWERING TREES / Palms , a) 1mts x 1mts x 1mts (L X W x D ) , b) Each pit to be added with 100gms of Thimet 10 g granule, to control termite attack. (Repeat the treatment after 06 months, if termite persists). Flooding the pit basin with water, dressing including removal of rubbish & surplus earth, if any, with all lead & lifts , c) Supply and plantation of approved varieties of healthy, disease free, stout stem & well developed root system tree sapling of, 5-6 height, with a clear minimum height of 4-5 from basin / ground level, after plantation. Staking the tree sapling upto 3/4 height with appropriate strength of bamboo stick. Lower 1 feet of stake portion should be treated with antitermite chemical , i) Phonix Palm , ii) Red Palm , iii) Golden Palm , iv) Fox Tail Palm , v) Areca Palm , d) Maintenance of tree sapling, after plantation for 30 days or more as minimum guarantee period, for well establishment of tree sapling. Stacking to be continued till tree sapling attains the stem strength. Replacement of saplings casualties immediately , LAWM PLANTATION , a) Preparation of ground by trenching in all type of soils upto a depth of 30cm including removal & stacking of serviceable material than disposing the surplus soil with all lead & lifts, by spreading and leveling neatly. Making up the trenched area well leveled by filling with additionally supplied earth (if needed). , b) Now rough dressing of trenched ground including breaking clods & flooding with water. , c) After 10-15 days removal of weeds / unwanted grass (motha etc) with roots & disposal of uprooted material, stone rubbish etc., with all lead & lifts. , d) Then fine dressing of ground. Spreading and mixing with the good earth (excavated / imported) & manure (organic manure / cow dung / sludge) in the ratio of 8:1 (08 part of stacked volume of good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth & 8% stacked volume of manure. The area to be mixed with antitermite chemical / granules, Thimet 10G @ 100-200gm / sqmts. If termite persists repeat the treatment after 06 months by surface spreading the chemical. , e) Supply of grass and planting by dibbling the area including watering & maintenance of lawn for 30 days or more till grass forms a thick lawn cushion free from weeds , i) With Bermunda grass (15cm x 15cm apart) , ii) Carpet of grass turfing , iii) Supply & turfing of artificial lawn , iv) After ward maintenance of lawn area, green & weed free for 01 year with standard specification , SHRUB PLANTATION (SOLO) , Digging pits in all type of soils and refilling the same the good earth (excavated / imported) & manure (organic manure / cow dung / sludge) in the ratio of 5:1 (05 part of stacked volume of manure). Cost of manure / sludge and good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth & 8% stacked volume of manure. Each pit to be mixed with antitermite chemical / granules thimet 10G @50-100gms / pit , i) Pit size 0.60mts x 0.60mts (Dia x Depth) , ii) Pit size 0.45 dia x 0.60mts Depth , b) Supply & plantation of shrub and / or rose sapling to pit, appropriate stacking & initial maintenance for 30 days. Replacement of sapling casualties immediately. , c) Afterward 01 year maintenance as per standard specification , SHRUBBERY PLANTATION - (SHRUBS IN GROUPS) , Digging beds in all type of soils and refilling the same with the good earth (excavated / imported) mixed with antitermite chemical / granules @100gm/sqmts) & manure (organic manure / cow dung / sludge) in the ratio of 5:1 by volume (05 part of staked volume of good earth & 1 part of stacked volume of manure). Cost of manure / sludge and good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth &8% stacked volume of manure , i) L X W X 0.60 mts depth , b) For roses, rose mixture @500gms / sq mts to be used additionally, before plantation , c) Termite treatment - Thimet 10G granules @100 gms / Sqmts , d) Supply & plantation of shrub sapling to pit, appropriate stacking & initial maintenance , e) Afterward 01 year maintenance as per standard specification , HEDGE PLANTATION , a) Digging trenches of approved / desired size of L X W (45-50cms) X D (30-60cm) in all type of soil. Refilling the trenches with good earth (excavated / imported) mixed with manure (cowdung / sludge / dump) in the ration of 5:1 (05 part of good earth and 01 part of manure by stacked volume). Cost of manure / sludge and good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth &8% stacked volume of manure. Fore Termite treatment add Thimet 10G granules @ 100gms / running mts. Flooding the trench with water and than rough & fine dressing of trenched area including removal of undesirable weeds & vegetation. , b) Supply & plantation of approved varieties of hedge plant saplings. It should be well grown, fully established & disease free. Sapling height & density as follows , i) Hedge with sapling height -0.45 mts to 0.60mts (After Plantation) , ii) Density - @07 Nos plants / running meters (staggered condition) , c) Maintenance the hedge by regular watering, trimming & pruning etc for 30 days initially. Replacement of sapling casualties immediately , d) Afterward maintenance of hedge length for 01 (one) year as per standard maintenance specification , GROUND COVER , Digging of ground cover marked area upto a depth of 30 cms in all type of soils. Refilling the same with (excavated / supplied) good earth mixed with manure (organic / cow dung / sludge) in the ration of 8:1 (08 part of good earth *01 part of manure by stacked volume). Cost of manure / sludge and good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth & 8% stacked volume of manure. For Termite treatment add Thimet 10G granules @100 gms/Sq mts. Flooding with water the entire area. Rough & fine dressing of the ground cover bed area and removal of weeds & unwanted vegetation & its disposal , b) Supply and plantation of approved / desired ground cover plant varieties, well established, fully grown, disease free and good foliage. Plantation density should be @36 ground cover plants / square metre, or less as desired or decided by site incharge. Maintenance of all the ground cover area for 30 days till the plants establish well. , c) Regular maintenance afterward for 01 year as per standard specification , FLOWER BED PREPARATION , Digging of FLOWER BED marked area upto a depth of 30 cms (Canna Beds - 60cms depth) in all type of soils. Refilling the same with (excavated / supplied) good earth mixed with manure (organic / cowdung/ sludge) in the ration of 5:1 (05 part of good earth & 01 part of manure) . Cost of manure / sludge and good earth if needed to be paid separately, after reduction of 20% by stacked volume of stacked volume of good earth & 8% stacked volume of manure. For Termite treatment add Thimet 10G granules @100gms / sq mts. Flooding the entire with water. Rough & fine dressing the flower bed area and removal of weeds & unwanted vegetation & its disposal with all lead and lifts , a) SEASONAL FLOWERING BED SIZEFORMAL STYLE - Lx1.0mts width, INFORMAL STYLE - Any style as desired , b) Supply & plantation of seasonal flowers sapling @36 seedlings / sq mts (minimum three times in a year) , i) BUL BOUS / CUTTINGS - FLOWERING - Dahalia Plants @16 plants / Sqm) Winter , c) Maintenance of flower beds regularly upto 1 year as per standard specifications. Replacement of casualty immediately , MOUND , Preparation of mounds of various size and shape by available excavated / supplied earth in a layers not exceeding 20cm in depth, breaking clods, watering of each layer, dressing etc with all lead & lifts complete as per direction of Officer in charge. Cost of manure / sludge and good earth if needed to be paid separately, after reduction of 20% of stacked volume of good earth and 8% stacked volume of manure , BRICK EDGING , Edging with bricks (Class I) laid in PCC (1:2:4) length wise, including required excavation, refilling, consolidating withhand packing and spreading surplus earth neatly within all lead and lifts , Brick Paving : Supply and Paving of wire cut bricks on sand bed , Terracotta Pot : Terracotta Pots of height 4 & width 1m made with 8mm rod chicken mesh with cement mortar complete , PVC Pipe Line : Supply & laying of 63mm dia PVC pipeline of ISI including excavation of outlet back filling of trenches of 0.60m depth fixing with all accessories and providing outlet wherever required backfilling of trenches etc complete , Supply & erection of 2 Hp pump with all accessories including panelboard etc , Supply, erection, testing and commissioning of 1.5sqmm 3 core copper cable , GOOD EARTH / AGRICULTURE SOIL , a) Supply and stacking of good earth / agriculture soil from approved source / field ; of approved quality / pH & suitable for plantation work with all leads, lifts, carriage and royalty / taxes etc. Cost of good earthto be paid separately, after reduction of 20% of stacked volume of good earth , b) Cattle manure : Supply of cattle manure , Note:- Where Ever Written for Sand Should be Read as Manufacture Sand
Contract Date: Feb 25, 2025 Contract Value : ₹ 47.47 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Kerala View Result →
35.
Defence #6866442 AOC
Repair Replacement Of Oh Crane Electric Operated Door Lifts Earthing And Other Connecting Items Under Ge Nagrota-M & L for servicing of 5/10 Ton capacity flame proof EOT crane of any make installed at different building/location at site, makingthe cranes in serviceable condition complete all as specified and directed with and including opeartions for maintenance specified as under:-(A) LONG TRAVERSE MOTION-(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.(b) Checking functioning of all brakes of any capacity and making adjustment for proper working.(c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.(d) Checking of grease in geared coupling and tighting of nut/bolts etc.(e) Checking of motion cut off at extreme ends with limit switches.(f) Checking drive shaft and coupling including tighting of nut and bolts.(g) Checking oil in FLP thrustors checking any leakage any filling with new oil.(h) Checking terminal connection of all LT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. 2 (B) CROSS TRAVERSE MOTION(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.(b) Checking functioning of all brakes of any capacity and making adjustment for proper working.(c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.(d) Checking of grease in geared coupling and tighting of nut/bolts etc.(e) Checking of motion cut off at extreme ends with limit switches.(f) Checking drive shaft and coupling including tighting of nut and bolts.(g) Checking oil in FLP thrustors checking any leakage any filling with new oil.(h) Checking terminal connection of all CT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (C) HOIST MOTION(a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.(b) Checking functioning of all brakes of any capacity and making adjustment for proper working.(c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc.(e) Checking of motion cut off at extreme ends with limit switches.(f) Checking drive shaft and coupling including tighting of nut and bolts.(g) Checking oil in FLP thrustors checking any leakage any filling with new oil.(h) Checking terminal connection of all hT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. 3 (D) ELECTRICALS(a) Checking and tightening all electric connection(b) Checking the contactors/ relays etc for overheating or flashinng.© Clening off all connection and control cables.(d) Properly bunching the loose control cable.(e) Checking functioning of cable carriers.(f) Checking the connection and serviceability of VVVF drives for smooth working. (E) GROUND MOTION CONTROL PANELOpening the push button control unit, checking all connection, replacing flashed/ over heated connections, general cleaning and checking all the functions,of the LT/CT/ Hoist motion push buttons and lights/ VVVF switch including reassembling the unit complete Notes : (i) Repair/overhauling of EOT Crane shall be carried out through authorized service agency of Original Equipment Manufacturer (OEM). The contractor shall submit documentary proof/evidence in this regard before taking EOT Cranes under repair, overhauling, etc.(ii)Make and model of part to be replaced shall be same as used/recommended by OEM. (iii) Repairing/replacement of unserviceable main components catered for separately under respective items of this Schedule shall be measured & paid for separately. (iv) Load as required for testing shall be arranged by the user/department. However, transportation of load for testing from the place of issue and return to the place of issue shall be responsibility of the contractor. (v) Contractor shall give a certificate after repair/overhauling of EOT Crane that Crane is serviceable & fully functional in all respect and ready to use for load.(h) Checking terminal connection of all hT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. 4 S & F in repair Repair to step down control transformer copper woundof PRI.V. 230 , SEC.V. -110,200 VA ,frequency 50Hz suitable for 2 to 5 Tonne capacity EOT cranecomplete all as specified and directed. 5 S & F contactor 20 Amps with 2 NO + 2NC including taking out old unserviceablecomplete all as specified and directed. 6 S & F contactor 25Amps with 2 NO + 2NC including taking out old unserviceablecomplete all as specified and directed. 7 S & F contactor 32 Amps with 2 NO + 2NC including taking out old unserviceablecomplete all as specified and directed. 8 M & L for push button switch with element in Flame proof Push Button Station as per require color code, including taking out old unserviceable one complete all as specified and directed. 9 Supply, fixingtesting & commissioning of AC drive, 5.5kW V/F control operated on 3 phase 415 Volt AC for hoist control CT/LT motor of EOT craneincluding taking out old unserviceable onecomplete all as specified and directed. 10 Supply, fixing and making allconnections for limit switch 40 Amps 415 Volts all as per existing for LT/CT/ hoist motion of 10 ton capacity crane including taking down unserviceable complete all as specified and directed. 11 Supply and fixing flame proof thrustor brake unit complete as per existing of capacity 18kg for drum size 100mm including taking down unserviceable complete all as specified and directed. 12 Supply only gear oil grade 680 suitable for hydraulic thruster brake complete all as directed. 13 Supply only Grease of required type/class for lubrication as specified and directed. 14 Supply only Ball bearing of size 6310 suitable for 10 Ton capacity gear box for main hoist complete all as specified and directed. 15 Supply only Ball bearing of size 6317 suitable for 10 Ton capacity gear box for main hoist complete all as specified and directed. 16 Supply only Ball bearing of size 6206 suitable for 10 Ton / 2 Ton capacity EOT crane for CT complete all as specified and directed. 17 Supply only Ball bearing of size 6212 suitable for 10 Ton / 2 Ton capacity EOT crane for Long Travel complete all as specified and directed. 18 Supply only Ball bearing of size 6210T suitable for 10 Ton / 2 Ton capacity EOT crane for Long Travel complete all as specified and directed. 19 S&F Steel wire rope 16 mm dia, 6 x 36 construction with tensile strength of 180 Kg/Sqmm with a factor of safety of 6 suitable for lifting load of 10 Ton including greasing complete all as specified and directed including taking down old unserviceable steel rope.Notes : (i) The steel rope shall be best performed plough straight non rotating type conforming to IS-2266. (ii) The breaking strength of the rope shall not be less than 6 time the safe working load thereon. (iii) Test Certificate of manufacturer shall be submitted by the contractor. 20 M&L for dismantling of following motors from 10 Ton / 2 Ton capacity EOT cranes, stripping out worn out bearings after dismantling including rewinding with super enameled copper wire of appropriate gauge as per existing and applying heat varnish properly with fine quality, replacement of ball bearing, insulating materials etc., and reassembling and fixing at its original position, testing complete all as specified & as directed :- 21 Slip Ring motor, 15 KW, 3 Phase, 415 Volts AC complete all as specified & as directed. 22 Slip Ring motor, 7.5 KW, 3 Phase, 415 Volts AC complete all as specified & as directed. 23 Squirrel cage motor, 1 to 3 KW, 3 Phase, 415 Volts AC complete all as specified & as directed. 24 S&F in repair Time delay relay – electro pneumatic with 1NO + 1NC contact blocks coil voltage 110 Volt, 0.5 to 60 sec, AC, complete all as specified & as directed. 25 S&F in repair Thermal over load relay of current setting range 20 - 32 Amps for 10 Ton EOT crane, complete all as specified & as directed. 26 S&F in repair Thermal over load relay of current setting range 16 - 25 Amps for 2 Ton EOT crane, complete all as specified & as directed.Make : Cat Part No. “3UA5800-2CZ2” of Make Siemens’ or equivalent in makes mentioned in Appendix B here-in-after. 27 S&F in repair Carbon bush along with holder for Hoist creep motion as used / recommended by OEM, complete all as specified & as directed. 28 S&F in repair Rubber bush for motor coupling as used / recommended by OEM, complete all as specified & as directed. 29 S&F in repair Rotary type limit switch with 40:1 ratio, suitable for 10 Ton capacity EOT crane for main hoist, of make as used / recommended by OEM, complete all as specified & as directed. 30 S&F in repair Rotary type limit switch with 40:1 ratio, suitable for 10 Ton capacity EOT crane for long travel, of make as used / recommended by OEM, complete all as specified & as directed. 31 S&F in repair PVC insulated & FR PVC round sheathed, multi stranded copper conductor cable (ISI marked) of size 2.5 Sqmm 4 Core, 1100 Volt, complete all as specified & as directed. 32 S&F in repair Trailing flexible copper conductor cable (ISI marked) of size 10 Sqmm 4 Core, 1100 Volt, with & including movable clamps and single flanged rollers, complete all as specified & as directed. 33 S&F in repair Thruster brake shoes of following sizes with necessary copper rivets etc complete of make Ferrodo liner or Usha or as used / recommended by OEM, complete all as specified & as directed :- 34 100 mm x 125 mm x 12mm thick. 35 100 mm x 75 mm x12mm thick. 36 112 mm x 100 mm x 12mm thick. 37 Material and labour for servicing /overhauling of electricaly/mannuallyopeated sliding steel doors of any size by applying grease on movable partsand replacement of the damaged parts if any required for smooth operations including cleaning of track and removal of mud / depositesand painting of steel doors with existingcolour with synthetic enemelled paint single coat on old surfaceinstalled in the various processing buildings/ Magazine and other technical buildings including preparation complete all as specified and as directed .Note :-The rate quoted is deemed to include for Spare/wornoutparts as required for replacement. 38 Material and labour for servicing /overhauling of gear boxes of Electrically operated door located at various locations including replacement of wornout spare parts of gear box if any required for smooth operation complete all as specified and directed by Engineer-in-Charge. Note :-Spare parts required for replacement will be measured and paid separately as Supply only. 39 Supply only ball bearing No. 6304. 40 Supply only ball bearing No. 6311. 41 Supply only ball bearing No. 4308 /6406. 42 Gear oil Multigrade 80W-90 43 Supply only worm gear (top gear) to operate rolling shutter. 44 Supply only shaft to operate worm gear. 45 Supply onlybowel gear (bottom gear) to operate rolling shutter. 46 Supply only worm shaft gear. 47 Supply only oil seal. 48 Supply and fix Solar PV Modules ofCrystalline Silicon Terrestrial PV Modules : IEC 61215 / IS14286 with Thin Film Terrestrial PV Modules : IEC 61646 with Concentrator PV Modules & Assemblies : IEC 62108 In addition, the modules must conform to IEC 61730 Part 1-requirements for construction & Part 2 - requirements for testing, for safety qualification or Equivalent IS. The PV modules must conform to the latest edition of any of the following IEC / equivalent BIS. Silicon Poly Crystalline SPV cells shall be used in the Solar Photovoltaic module.TheGeneral requirements for PV module:(i) Module shall be made up of mono or poly crystalline silicon cells.(ii) The interconnected cells shall be laminated in vacuum to withstand adverse environmental conditions (iii) The minimum clearance between the lower edge of the modules and the developed ground level shall be 300 mm. (iv) Surge arresting device to be provided at junction box, if provided,and module shall be provided with bypass diode.(v) The bidder shall carefully design & accommodate requisite numbers of the modules in the available area (refer layout attached with the tender) to achieve the rated power in his bid.(vi) The SPV module must be IEC 61215 and IEC 61730 Part I and Part II certified from any of the accredited certifying agencies(vii) Each Solar PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years from the completion of the trial run. 49 M& L forServicing and calibration of grid tied string type inverter of 50 KW installed at GE Nagrota with complete testing and servicing and make it fully functional complete all as specified and directed. Note : i) Serviving include the calibration and testing from OEM. 50 Supply and fix in reapir DC CABLESof 1 Core 4 mm² ofSolar Grade, UV resistant made of Multistrand ofTinned Copper Conductor interconnectingbetween module to module and string to module complete all as specfied and directed. 51 Supply and fix in reapirAC cables from invertor to ACDB of size 35 sqmm 4 core, copper conductor, PVC insulated, FRLS,fixed with saddles to wall and laying in ducts, complete all as directed at site. 52 M& L for Testing , Servcing & calibration of cloud based Monitoring System ( SCADA) by checking all the parametercurrent, Power, Voltage from the OEM. SCADA web operation shall be achieved thru Wi Fi/SIM based technology. Contractor has to provide SIM card for SCADA operation and maintain the connection for the entire period contract. 53 M& L forComprehensive maintenance of passengers lift to carry 8 passengerscapacity with a speed of 1 metre/ sec, of Make: Thyson groupto serve ground floor and 6 upper floors with AC variable voltage and variable frequency drive (VVVF DRIVE) system, micro processor based control system all as per IS 14665 hall position indicators on all floors, car position indicators in cabin, battery operated alarm bell and emergency lights including cabin light and fan over load switch, auto revelling, intercom facility with centre opening, stainless steel power operated sliding doors, including examining the operation, adjusting, lubricating and repairs as required to machine motor, controller parts, safety devices, governors, repair/ replacement as required to alarm bell, indicators, emergency light, emergency components, including low voltage protection relay, call bell, etc. complete all as specified and directed.Location : MAP Building- 04 Nos. Notes for Item No 51: (a) The contractor shall make AMC contract with the authorised service agency of lift and the repairs/ maintenance shall be carried out through the authorised service agency only. The quoted rate in deemed to be inclusive for comprehensive maintenance of 04 lifts at MAP building per month(b) The rate quoted shall be deemed to include for carrying out all repairs to lift noticed during the period by providing materials and labour.(c)Authorized rep of OEM will visit the lift and check it on monthly basis. 54 M & L for Comprehensive maintenance of passengers lift to carry 13 passengerscapacity with a speed of 1 metre/ sec, of Make: Thyson groupto serve ground floor and 6 upper floors with AC variable voltage and variable frequency drive (VVVF DRIVE) system, micro processor based control system all as per IS 14665 hall position indicators on all floors, car position indicators in cabin, battery operated alarm bell and emergency lights including cabin light and fan over load Material & labour for switch, auto revelling, intercom facility with centre opening, stainless steel power operated sliding doors, including examining the operation, adjusting, lubricating and repairs as required to machine motor, controller parts, safety devices, governors, repair/ replacement as required to alarm bell, indicators, emergency light, emergency components, including low voltage protection relay, call bell, etc. complete all as specified and directed.Location : MAP Building- 04 Nos.Notes for Item No 52: (a) The contractor shall make AMC contract with the authorised service agency of lift and the repairs/ maintenance shall be carried out through the authorised service agency only. The quoted rate in deemed to be inclusive for comprehensive maintenance of 04 lifts at MAP building per month (b) The rate quoted shall be deemed to include for carrying out all repairs to lift noticed during the period by providing materials and labour.(c)Authorized rep of OEM will visit the lift and check it on monthly basis. 55 Supply and FixSealed Maintenance Free (SMF) battery of capacity 12 V, 18AH, suitable for existing 3 phase online UPS as required at location including initial charging complete with inbuilt charger including electrolyte/ distilled water etc including taking down of old battery and shifting to MES store yard for deposit all as directed by engineer in charge complete all as specified.Notes for Item No 53:-(i)The contractor shall submit full replacement warranty certificate for minimum period of 02 years from the date of installation. (ii) The contractor shall supply SMF battery as and when demanded by Engineer-in-Charge during the currency of contract. 56 Refixing existing Aluminium strip of any size from building,Store house, Bunkers with porcelain insulator and tightly fix around the building complete all as specified and directed. Note : Necessary Saddles and Nails required for fixing the strip on wall shall be deemed including in items rate. 57 S&F in repairs12 mm dia and 300 mm long air termination, single pointed aluminium rod , complete all as specified and directed. 58 Supply and fixing in repair of aluminium strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed. 59 Supply and fix in repair GI strip of size 25 x 4 mm for earth continuity conductor or main earthing lead fixed to wall burried in ground fixed alongwith poles complete all as specified. 60 M&L forEarthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 25×4 mmby means of bolts, nuts, check nuts and washers of galvanised iron including pit of PCC (1:2:4) type B-1, pre cast RCC cover slab of size 550x550x75mm, XPM reinforced not less than 1.60Kg/Sqm with suitable built in handle made from 12mm dia MS round bar, excavation and earth work in any type of soil, 20mm dia bore medium grade galvanised iron water tubing fixed with cast iron funnel and wire mesh at one end, 15mm bore light grade galvanised iron protection pipe for earth lead wire upto 5m length, charcol, common salt complete all as shown in electric plate No 5 of SSR 2009 Part I connected to equipment, complete all as specified and testing on completion all as directed. 61 M&L forEarthing complete with copper plate electrode 60cmx60cmx3.15mm thick, burried directly in ground preferably in vertical position (Earth pit not less than 2.25 mtr below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level, connected to copper strip of size20x3mm as earthing leadby means of bolts, nuts, check nuts and washers of galvanised iron including pit of PCC (1:2:4) type B-1, pre cast RCC cover slab of size 550x550x75mm, XPM reinforced not less than 1.60Kg/Sqm with suitable built in handle made from 12mm dia MS round bar, excavation and earth work in any type of soil, 20mm dia bore medium grade galvanised iron water tubing fixed with cast iron funnel and wire mesh at one end, 15mm bore light grade galvanised iron protection pipe for earth lead wire upto 5m length, charcol, common salt complete all as shown in electric plate No 5 of SSR 2009 Part I connected to equipment, testing on completion, complete all as specified and directed. 62 M&L for earthing complete for bldg/4 pole structure/ 2 pole structurewith galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm diaby means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel,PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish ,internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge,80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled withcharcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified includingprovision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete ,all excavation andearth work & connecting the earthing to an earthing test point /Panel/ 4 pole struture / 2pole structureas specified and testing on completion complete all as directed. 63 Supply, Fixing , Commissioning and testing of CPRI approved outdoor cubical type LT Feeder Piller box suitable for 415 V, 3 Phase , 4 wire50 Hz , AC Supply system fabricated from MS sheet totally encloused ,dust, weather & vermin proof , 3.00 mm thick for outer shell and 2 mm thick for inner shell having MS section not less than 50x50x6 mm thick havingTPN aluminium busbar of capacity 500 Amps mounted on porcelain insulatorduly drilled hole for cable connection including front and rear side opening with locking arrangement, with MCCB 4P 400 Amp, 36 KA, 415 Volts 50 Hz with adjustable thermal and adjustable magnetic setting and provn for incoming and outgoing cables withglands includingcontrol wiring with minimum 1.5 sqmm PVC insulated copper conductor for measuring of voltage, amp with indicators RYB ,painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge.Note:- Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 30 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate. 64 Supply and fixingFeeder piller box out door type ‘factorymade’ made out from 16 SWG MS sheet supported with legs of 45cm long made of iron angle 25x25x4mm thick of size 75cm x60cm x45 cm with 04 Nos aluminiumbus bar of250 Amps mounted on porcelain insulatorduly drilled hole for cable connection including front and rear side opening with locking arrangement, with MCCB FP 200 Amp, 25 KA, 415 Volts 50 Hz with adjustable thermal and adjustable magnetic setting and provn for incoming and outgoing cables withglands including painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-ChargeNote:- Feeder pillar box shall be mounted on brickwork in CM 1:4 not less than 60 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate. 65 Supply,laying, jointing and testingXLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area25 Sqmm 4 core, complete all as specified and directed by Engineer-in-Charge 66 Supply,laying, jointing and testingXLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area16 Sqmm 4 core, complete all as specified and directed by Engineer-in-Charge 67 M& L for Steel tubing galvanized(Light grade)40mm bore conforming to IS -1239 for passing cable under road /floor or fixing to poles for protection of underground cable complete all as specified and directed.. 68 M& L forSteel tubing galvanized(Light grade)25mm bore conforming to IS -1239 for passing cable under road /floor or fixing to poles for protection of underground cable complete all as specified and directed.. 69 Supply and fix wall mounted Busbar chambers 415 V, 3 phase, 4 wire 50 Hz AC supply system fabricated from stainless steel with 3 mm thick for outer cell TPN aluminium busbarof cap100 Amp 4 pole 8 wayconnected with proper Nut and bolt complete all as specfied and directed by Engineer -in-charge. 70 Supply and fix and laying thearrangment of GI pipe 15 mmfor the purpose of watering to earth pit along with bib tap in Main MRS station along with all earthing pit complete all as specfied and directed. 71 Supply and fixingsteel tubular pole, swaged, complete with cast iron base plate, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints,type 410 SP-55 (11.0 metres long) complete, Including disconnectingand taking outold damage PCC pole all as directed . 72 M & L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete in foundation of pole/stays etc complete all as specified 73 M & L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete in foundation of pole/stays etc complete all as specified 74 M & L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping/above ground level around the pole etc complete all as specified. 75 Re-fixing of old serviceable tilted air termination rod of any size and type after straightening & dressing with and including suitable nut, bolts and washers to earth strip complete all as specified and directed. Note : The quoted rate include the necessary PCC work. 76 Supply and fixing GI earthing continuty conductor wire of 4mm dia with saddles/ insulators and fixing screws for roof/down conductors/ earth lead including brazing and nut bolts jointing at all joints for building/ hangar (roof/down conductor)/ pipe/ trench complete all as specified and directed. 77 Supply and fixing in replacement of saddle/insulator for earth strip with fixing arrangement in roof/ wall conductors of building/ hangar complete all as specified and directed. 78 Supply and fixing in replacement of GI funnel with wire mesh for earting pits of existing size complete all as specified and directed. 79 M&L for dismantling of PCC earth pit chamber and making new PCC earth pit chamber of size as per electrical plate No. 3 of SSR-2009 Part-I with PCC 1:2:4 type B1 with precast RCC 1:2:4 type B1 cover slab 54cm x 54cm x 5cm reinforce with 8mm dia TMT bars @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel including excavation and earth work as required at site complete all as specified and directed. 80 M&L for recharging of earthing pits by filling of magnesium sulphate, 100% water soluble fertilizer type in earthing pits complete all as specified and directed. Note:- Recharging materials shall be soluble in water and to be filled/ poured in earth pit after mixing in water in appropriate quantity. 81 M & L for MS Framed work as in framed structure (around 4 pole/2 pole/ LT pannel/ Transformer) guard bars, framed balusters and similar workscomplete including PCC work as in foundation complete all as specified. 82 M & L for Expended metal cut to length, bend to required shape weight not less than 4 kg/Sqm and laying with and including annealed MS wire or welded to steel members complete all as specified. 83 Material and labour for spreading and leveling evenly (any thickness) 20 mm graded stone aggregated complete all as specified and directed. 84 Material and labour for spreading and leveling evenly (any thickness) 40 mm graded stone aggregated complete all as specified and directed. 85 M&L for recharging of earthing pits by filling of common salt in earthing pits complete all as specified and directed. Note:- Recharging materials shall be soluble in water and to be filled/ poured in earth pit after mixing in water in appropriate quantity.
Contract Date: Feb 20, 2025 Contract Value : ₹ 22.36 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Jammu And Kashmir View Result →
36.
Defence #6561665 AOC
Bids Are Invited For Electrician Tool Kit (Q3) , Supply And Fixing In Replacement Of Power Contactor 3 Phase Mnx Series Freedom Series Type Or As Per Existing Sample Model Of Rated Capacity 25 Amp , Supply And Fixing In Replacement Of Power Contactor 3 Phase Mnx Series Freedom Series Type Or As Per Existing Sample , Supply Fixing, Adjustment And In Replacement Of Unserviceable Ac Drive Variable Frequency Drive Vfd Frequency , Supply Fixing Adjustment And In Replacement Of Unserviceable Ac Drive Verable Frequency Drive Vfd Frequency Convertor , Supply Fixing In Replacement Of Programmable Logic Relay Plr Plc Of Rating 110 240 Vac 8Ac In 4Riy Out Put 4X Relay , Supply And Fixing In Replacement Of Unserviceable Dynamic Breaking Resistance Dbr Device Of Rating Model 180R 1Kw Or 180Ej 1200W , Supply And Fixing In Replacement Of Single Phase Preventer Of Type Vsp 2 Vsp3 Or As Per Existing Sample , Supply And Fixing In Replacement Of Mcb Tp Capacity 32 Amp 415 Volt , Material And Labour In Replacement Of Step Down Transformer With Having Rating 440 Volt , Material And Labour In Replacement Of Step Down Transformer With Having Rating 440 Volt To 110 Volt , Supply And Fixing In Replacement Of Unserviceable Mcb Db 4 Way 415 Volt Ac Double Door System , Supply And Fixed In Replacement Of Unserviceable Mcb Tpn 63 Amps 415 Volts Ac , Material And Labour For Taking Down Of Unserviceable Motor From Oht Crane And Including Transporting , Supplying And Fixing In Replacement Of Push Button With Electric Terminal Connector Block , Supply And Fixing In Replacement Of Mcb Tp Capacity 63 Amp 415 Volt , Supplying And Fixing In Replacement Of Electric Terminal Connector Block , Supplying And Fixing In Replacement Of Flexible Type Steel Wire Suspension Rope Heavy Duty Of Size 12 Mm Dia , Supplying And Fixing In Replacement Of Flexible Type Steel Wire Suspension Rope Heavy Duty Of Size 8Mm Dia , Supplying And Fixing In 1 38Heavy Duty Of Size 8Mm Dia , Supplying And Fixing In Brake Leather Shoe Shoes Type Brake With Fixing Accessories As Per Existing Sample Size Suitable For 2 Ton Eot , Material And Labour For Taking Down And Repair Of Existing Thruster Brake Assembly And Including Rewinding , Supply And Fixing In Replacement Of Unserviceable Worn Out Electromagnetic Flame Proof Thuster Brakes , Supply And Fixing In Replacement Of Unserviceable Worn Out Electromagnetic Flame Proof Thuster Brakes Set , Supply And Fixing In Replacement Of Unserviceable Flexible Star Type Male And Female Type Coupling System , Supply And Fixing In Replacement Of Unserviceable Bushed Ball Bearing As Per Existing Sample Model Suitable Of Operating , Supply And Fixing In Replacement Of Unserviceable Flanged Type Wheel Ball Bearing , Supply And Fixing In Replacement Of Unserviceable Metal Body Flame Proof Weather Proof Rotary Gear Type , Supply And Fixing In Replacement Of Unserviceable Metal Body Flame Proof Weather Proof Push Roller , Supply And Fixing In Replacement Of Unserviceable Metal Type Flame Proof Weather Proof Junction Box , Supply And Fixing In Replacement Of Non Flame Proof Suspension Type Pendent Hand Operating Controlling Unit Made Out Of Ms Sheet , Supply And Fixing In Replacement Of Flame Proof Suspension Type Pendent Hanging Controlling Unit , Supply And Fixing Moulded Care Circuit Breakers Mccb Fixed Thermal And Fixed Magnetic Setting , Supply And Fixing In Replacement Of Unserviceable Main Gear Box Oil Seal Cover Packing Seal , Material And Labour For Earthing Complete With Copper Earth Plate Electrodes 600 Mmx600 Mm X6 Mm Thick , Supply And Fixing Copper Strip Of Size 25 Mmx 4 Mm Thick Duly Fixed With Wall Floor Equipment Geared , Supply And Fixing In Replacement Of Unserviceable Metal Type Rachet Clutch Gear And Rachet Pawl Control , Supply And Fixing In Replacement Of Unserviceable Ms Handling Pulling Chain Suitable For Operation Of Lt And Ct , Supply And Fixing In Replacement Of Unserviceable Metal Body Wheel Brushes Bearing , Dismantling Of Existing Reduction Gear Box With Device For Hoist Ct Lt Motion Traverse For Eot Cranes , S And F Pvc Insulator Steel Wire Rope Of Size 3 To 4 Mm Suitable For Hanging Of Push Button Station , Labour Only For Locating The Fault In Eot Cranes Any Capacity Make And Type Including Rectification Of Minor Defects , Material And Labour In Replacement Wiring Of Control Panel Of Existing Panel With Pvc Copper Conductor Cable , Material And Labour For In Replacement Of Bottom Hook Assembly Of 2 Ton To 5 Ton Capacity Total Quantity : 1402
Contract Date: Ref. Documents Contract Value : ₹ 43.32 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Punjab View Result →
37.
Agriculture #3834429 AOC
Tender For Motor Rewinding Work- 1 Electric Motor Rewinding Insulation Class- B 2 0.5 Hp, 720, 960, 1440, 2900 Rpmstator 3 0.75 Hp, 720, 960, 1440, 2900 Rpm Stator 4 1.00 Hp 720, 960, 1440, 2900 Rpmstator 5 2.00 Hp 720, 960, 1440, 2900 Rpmstator 6 3.00 Hp 720, 960, 1440, 2900 Rpmstator 7 5.00 Hp 720, 960, 1440, 2900 Rpmstator 8 7.5 Hp 720, 960, 1440, 2900 Rpmstator 9 10 Hp 720, 960, 1440, 2900 Rpm Stator 10 11.5 Hp 720, 960, 1440, 2900 Rpmstator 11 12.5 Hp 720, 960, 1440, 2900 Rpmstator 12 15.00 Hp 720, 960, 1440, 2900 Rpmstator 13 20 Hp To 120 Hp, 720, 960, 1440, 2900 Rpmstator 14 Rotor 15 Rewinding Of Crane Duty Motor 15 Hp, 960 Rpm, Insulation Class- Hrotor 16 Stator 17 25 Hp, 960 Rpm, Insulation Class- Hrotor 18 Stator 19 Slipring Motor 20 75 Hp, 1440 Rpm, Squral Cage Rotor Of Alluminium Binding Converted Into Copper Strip Binding And Dynamic Balancing With Certificate. 21 120 Hp To 250 Hp, 960, 1440 Rpm Strip Binding Rotor 22 Stator 23 250 Hp, 585 Rpm, Strip Bindingrotor 24 Stator 25 265 Hp, 960 Rpm, Strip Bindingrotor 26 Stator 27 400 Hp, 720 Rpm, Strip Binding Rotor 28 Stator 29 Rewinding Of Cane Unloader Motor S-5Duty 415 Volt15 Hp, 965 Rpm , 900 Starts / Stop Per Hour Rotor 30 Stator 31 25 Hp, 965 Rpm , 900 Starts / Stop Per Hour Rotor 32 Stator 33 Three Speed Motorinsulationclass - F 34 Centrifugal Motor 110 Kw Ac 1St Speed Upto 200 Rpm 35 2Nd & 3Rd Speed Upto 450 Rpm & 960 Rpm 36 Dc-Motor D-412 Kcp Centrifugal Machine 167 Kv, 1250 Rpmrotor 37 Stator 38 Repair Of Core ( 3 Speed Stator ) 39 Buffing & Policing Of Rotor Commutator Of Dc Motor For D-412 Centrifugal Machine 40 Welding Machine Spares Rewinding 41 Primary Coil 42 Secondarycoil 43 Choke Coil 44 D.C.Welding Machine Rectifier 230 / 24 Volt 45 Rewinding And Repairing Of 3 Phase 400 Rpm Welding Machine 46 D.G.Set Spares Rewinding 47 166 Kva Alternator Of Dg Set 1500 Rpm, 50Hz, Pole Of Rotor 4Nos. Complete Rewinding H Class Enamelled Copper Strip With Material And Labour And Dynamic Balancing With Test Certificaterotor 48 Stator 49 320 Kva Alternator Of Dg Set 1500 Rpmrotor 50 Stator 51 166 Kva Alternator Set Excitation System ( Booster ) 52 320 Kva Alternator Excitor Rotor 53 320 Kva Alternator Excitor Filed Coil 54 Rewinding And Repair Of Submersible Pump Motor 15 Hp 55 25 Hp 56 Complete Rewinding Of 1875 Kva Excitor Rotor ( Jyoti Make ) Of 1500 Kw Alternator With Satisfactory Testing & Trial On Load. 57 Other Rewinding Work 58 Break Thruster Mootor 59 Cooler Fan Single Speed / Three Speed 60 Exhaust Fan Single Phase / Three Speed 61 Rewinding Of Celling Fan 62 Brass Holder For Turbine Excitor 63 Copper Carbon Brush For Turbine Excitor 64 Repairing Of D.C. Excitor ( Jyoti Make ) 15 Kw With Packing & Cutting Of Commutator & Re-Soldering Of Lug Etc. Complete 65 Charges For Supply Of Diode Fixing Plate Alluminium For 1875 Kva Turbine Alternator 66 Supply & Fixing Of Variable Set Complete ( I ) 4 Amp. 270 Volt 67 Ii ) 8 Amp. 270 Volt. 68 Earthing Electrode Size 75 Mm X 3000 Mm With Chemical Bags And Fitting At Mill Site. 69 Dismantling Of Thruster Of Cane Unloader Replacement, Repair Of Aluminium Housing Assembling And Testing At 20 Kg. Load Complete In All Break System 70 Chief Engineer
Contract Date: Jul 31, 2023 Contract Value : ₹ 1.41 Lakh
Cooperative No of Bidders 2
Uttarakhand View Result →
38.
Defence #3659507 AOC
Comprehensive Maintenance Of Crane At Cg Area Goa Under Ge ( I ) ( Cg ) Goa , Carry Out Load And Deflection Test For Each Eot / Hot Crane For 3 . 5 Capacity At 100 % Full Load With Necessary Instruments On Hoisting Lt / Ct Motion For Checking The Performance Of The Cranes Complete All As Specified And Directed . Note :- ( I ) Load / Deflection Test Is To Be Carried Out By The Contractors Expert Representative In The Relevant Field In Presence Of The Department Representative And Recording The Test And Issue Necessary Certificate . ( Refer Annexure B In Particular Specification ) ( Ii ) The Load Required For The Testing And Necessary Transportation Will Be Arranged By The Contractor At The Location Of Testing For 3 . 5 Ton Capacity Eot Crane . Make :- Khandewel Installed In The Cgae Hangar . Sm No 208772 , Mes No C-02545-S ) , All As Per Item No 01 Above But For 2 Ton Capacity Eot Crane All As Specified And Directed . Make :- Khandewel Installed In The Cgae Hangar . Aed/Ald M/C No 559/7003-Cn/04 . , Carry Out The Monthly Maintenance Of Eot Cranes , Including Replacement And Greasing To All Parts Such As Bolts , Nuts , Coupling Bolts And Bushes And Attending The Brake Down As And When Required For Efficient Operation Of Eot Cranes 2 Ton Capacity Crane Installed At 800 Sqm At Tech Area , Ins Hansa Complete All As Specified And Directed , Carry Out The Monthly Maintenance Of Eot Cranes , Including Replacement And Greasing To All Parts Such As Bolts , Nuts , Coupling Bolts And Bushes And Attending The Brake Down As And When Required For Efficient Operation Of Hot Cranes 3 . 5 Ton Capacity Crane Installed At P-448 Coast Guard Hanger Complete All As Specified And Directed . Note:- For Item No 03 And 04 Only . ( I ) Tendered Shall Visit The Site And Study The Condition For Each Crane Before Quoting . ( Ii ) The Rate Quoted Shall Be Deemed To Include For Periodical Checking/Maintenance . ( Iii ) Contractor Shall Hand Over All The Cranes To Age E/M Goa In Serviceable Condition After Completion Contract Period . ( Iv ) Electricity Required For Testing Shall Be Supplied Free Of Cost . ( V ) Replacement Of Spares Will Be Paid Under Relevant Items Of Sch A As Supply Only Rates . Activities Of Disconnecting And Fixing Are Deemed To Be Included In The Unit Rate Mentioned . Payment Shall Be Released After Submission Month Wise Maintenance Repoet As Per Annexure C In Particular Specification , Supply Only Crane Control Cable 24 Core Pvc Insulated Tinned Copper Branded Pvc Sheathed Flexible Cable 1100 Volts 1 . 5 Sqmm Size Complete All As Specified And Directed . , Supply Only Electromagnetic Thruster Brake Suitable For 3 . 5 Ton Capacity Eot Crane Complete All As Specified And Directed . , Supply Only Mixture Of Grease And Oil In The Gear Box Of Eot Cranes Complete All As Specified And Directed . , Supply Only Over Load Relay Model 4166 40 Complete All As Specified And Directed . , Supply Only Long Travel And Cross Limit Switches For 2/3 . 5 Ton Capacity Electrically Operated Travelling Crane At 800 Sqn Complete All As Specified And Directed , Supply Only Rotary Geared Type Limit Switches , For 2/3 . 5 Ton Capacity Eot Crane At Cg Tech Area , Ins , Hansa Complete All As Specified And Directed , Supply Only Power Contactor Assembly Complete 3 Phase 3 Pole 415V Ac Suitable For The Existing Eot Crane Control Panel And Of Current Rating Upto 32 With 2 No & 2 Nc Complete All As Specified And Directed . , Supply Only 3 Pole Power Contactor Type Mnx- 22 As Per Cat No 416119 Complete All As Specified And Directed . , M&L For Over Hauling Of Ct And Lt Wheel Gear Box Of Eot And Hot Cranes , Repair To Shaft And Replacement Of Lock Plate Etc , Fixing And Testing , Replacement Of Worn Out And Damaged Bearing Including Making Necessary Arrangement Like Staging , Platform For Carry Out The Above Repair Complete All As Specified And Directed . , M&L In Repairs For Rewinding Of Electric Motor Of Cranes Service Heavy Duty Includes Lowering Down , Transporting To Work Shop And Back , Erection , Testing & Commissioning Etc . Complete All As Specified And Directed . , M&L In Repairs For Lowering And Over Hauling Of Ct And Lt Control Gear Box , Opening The Gear Box Replacement Of Damaged Bearing And Oil Seals , Gaskets , Filling With New Oil , Fixing In Position , Testing Complete All As Specified And Directed . Note :- For Item No 13 To 15 . Dismantling Of Spares From The Crane And Refixing Of The Same Are Not Included In The Unit Rate Mentioned . Same Is Deemed To Be Included In Sch A Item No 3 & 4 . , Supply Only Brake Liner Suitable For 2 And 3 . 5 Ton Capacity Of Cranes To Match The Existing One Complete All As Specified And Directed . , M&L For Preparing / Scrapping The Surface Of Eot / Hot Crane Of 3 . 5 Ton Capacity 38 Mtrs Span And 15 Mtr Height Double Girder End Carriages , Ct & Lt Drive Mechanism Applying Two Coats Of Synthetic Enamel Paint Over A Touch Up Coat Of Red Oxide Primer Of Approved Colour Complete All As Specified And Directed . Make: Khandelwel At Cgae Sm No 208772 , Mes No C-02545-S . , All As Per Item No 17 Above But For 2 Ton Capacity 25 Mtrs Span And 15 Mtrs Height Eot Crane Complete All As Specified And Directed . Make :-Khandelwel Mc No 559/7003-Cn/4
Contract Date: Jun 09, 2021 Contract Value : ₹ 3.69 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Goa View Result →
39.
Defence #2095075 AOC
Repair Replacement Of Eot Cranes And Misc Items At Ins Shikra And Boat Pool Under Ge Nw Nofra Colaba Mumbai - 1.00 Material And Labour For Servicing Of Over Head Traveling Crane Complete Including Checking / Tighting Of All Nut , Bolt & Breaks Any Type Any Size Complete System, Adjustingetc Of All Breakes Motions And Vfd Adjustment Setting As Per Load Testing Run Of Flame Proof / Non Flame Proof / Normal Type Eot / Hot Cranes With Having Single Or Double Girder Type And Providing Greasing & Oiling Of Traving / Moving Parts Of Crane With Connecting Motor Girder Parts For Movment Of Crane Hoist / Long / Cross Traveling And Including Maintained The Controlling Of Speed / Creeping Micro Speed Of Motors With Minor Maint / Repair The Electrically Operated Main Control Panel Wire With Connecting Control Wiring System Consisting Of Main Switch, Step Down Transformer, Contactor, Hrc Fuse, Vfd, Plr, Control Pendent , Wire Rope With Break Drum Unit, Gear Box Unit , Oil Levels, Motor Bed / Foot , Electrical Control Cable, Motor Terminal, End Cable Carriage Trolly, Motor Shaft, Bush Flange Bearing With Lathe Work , Chain Pully Block, Rachet Cluch, Gear Block, Chain Wheel, Chain Etc And Including Locating The Defected Fault And Rectification Of The Fault And Rectification Of Oil Leakage Etc Any Type Any Size And Replacement Of Difected Nut, Bolt & Washer And Making It Sound Less Proof And After Trails Testing Run Of Crane For Smooth Functional / Operation For The Following Mentioned Capacity Cranes Complete All As Specified And Directed By Engineer-In-Charge. 1.01 Eot Crane Of Capacity 1 Ton 1.02 Eot Crane Of Capacity 2 Ton 1.03 Eot Crane Of Capacity 10 Ton 1.04 Note- Periodic Inspection / Servicing, To Be Carried Out In Every Three Months And Making / Keeping The Cranes Serviceable, For Eot / Hot Cranes Of Rating Load 1 Ton To 02 Ton Capacity Installed In Various Locations, Including The Properly Checks As Mentioned As Following:- ( I ) Long Travel Motion And Cross Travel Motion ( A ) Checking Gear Box Oil Level And Filling With Required Oil And Rectification Of Leakages If Any. ( Note: Gear Oil Shall Be Measured And Paid Separately As Supply Only ) ( B ) Brake Adjustment ( C ) Checking Of Long Travel & Cross Travel Wheel For Any Noise / Malfunctioning. ( D ) Checking Grease Of Geared Couplings, Complete Nut, Bolt Work For Tightening And Replacement Of Grease Nipple. ( E ) Checking Of Oil In Hydraulic Thruster Brake, Rectification Of Leakages If Any And Filling With Required Quantity Of Oil. ( Note: Brake Oil Shall Be Measured And Paid Separately As Supply Only ) ( F ) Checking Of Electric Motor Connections, Insulation Resistance Value Etc ( G ) Checking The Cut-Off At Extreme Ends With The Limit Switch. ( J ) Checking And Greasing Of Shaft Pedestal. ( Ii ) Hoist Motion ( A ) Checking Gear Box Oil Level And Filling With Required Oil And Rectification Of Leakages If Any. ( Note: Gear Oil Shall Be Measured And Paid Separately As Supply Only ) ( B ) Brake Adjustment ( C ) Checking Of Main Bearings Of The Rope Drum Including Greasing The Same ( D ) Checking Grease Of Geared Couplings And Nut Tightening. ( E ) Checking Of Oil In Hydraulic Thruster Brake, Rectification Of Leakages If Any And Filling With Required Quantity Of Oil. ( Note: Brake Oil Shall Be Measured And Paid Separately As Supply Only ) 1.05 ( F ) Checking Of Electric Motor Connections, Insulation Resistance Value. ( G ) Checking Wire Rope For Any Damage & Greasing The Rope. ( H ) Adjustment Of The Rotary Limit Switch. ( J ) Checking Of Bearing Of The Hook And Greasing The Same. ( Iii ) Electrical Panel ( A ) Checking The Contactors For Overheating Or Flashing. ( B ) General Checking Of Contacts And Connections. ( C ) Cleaning Of Control Panels And Checking Of Connections. ( D ) Checking Of Connections Of Vvvf Drives / Other Drive, Calibrating Vvvf Drive And Plc To Get Smooth Movement & Maximum Efficiency / Other Drives For Smooth Functioning Of The Same. ( E ) Checking The Serviceability Of Cable Including Power / Control Cable, Checking The Serviceability Of Cable Carrier / Cable Trolleys , Adjusting As Possible To Get Maximum Free For Movement Of Moving Part / Aprons Of Eot Cranes ( Iv ) Down Shop Lead ( A ) Checking The Alignment And Rectification. ( B ) Cleaning Of The Moving / Sliding Objects. 1.06 ( V ) Ground Motion Control Panel ( A ) Checking Function Ability Of Motion Push Buttons, Function Lock Key Operated Switch, On &Off , Lamps.Note: 1.Periodic Inspection / Servicing Shall Be Carried Out By Authorized Service Engineers / Agencies, Without Any Disturbance Of Movement / Operation Schedule Of Bldgs As Approvd By Accepting Officer. 2.All Expenditure For Minor Material & Labour, T&P Shall Deemed To Be Included In Quoted Amount. 3. Major Materials Shall Be Measured And Paid Separately Under Relevant Items Of Schedule A. Note :- ( I ) Servicing, Adjustingetc Of Breakes Motions And Testing Run Work Will Be Carried Out By Well Qualified Techanician Having Good Experience In The About Repairing Field Of Eot / Hot Cranes Or As Approved By Ge Or Engineer-In-Charge. ( Ii ) It Is Personaly Resposibily / Liabality Of Contractor For Smooth Functional Of Crane For 6 Month After The Handing / Taking Over The All Site With Out Any Extra Cost To Department. ( Iii ) Contractor Shall Be Immedalty Depute Suitable Nos Of Trade Mans To Attend The Complaints On Requred Basis For Found Unserviceable Of Cranes With In The Effected Time After Lauching Of Completions Or All As Specified And Directed By Engineer-In-Charge. ( Iv ) Major Repair / Replacement Of Items Will Be Paid Separately As Under In The Schedule Of Work Items 2.00 Providing Material And Labour For Load Testing Of Over Head Traveling Crane Of Capacity 1 Ton Eot Crane As Per Manufacture Norm For Safe Working Rating Load Including Arrangment Of Dead Load Measurement Unit With Link Steel Wire Rope And Required Suitable Load For Testing With Duly Varying The Load Upto 110% Of The Rated Capacity Load Of Crane Including Trasporting To Testing Load At Difference Location And Also Providing Load Test Certificate In Triplicate Set From Authorised Crane Inspector Duly Signed By Inspector Authority Of Crane Complete All As Specified And Directed By Engineer-In-Charge 3.00 Providing Material And Labour For Load Testing Of Over Head Traveling Crane Of Capacity 2 Ton Eot Crane As Per Manufacture Norm For Safe Working Rating Load Including Arrangment Of Dead Load Measurement Unit With Link Steel Wire Rope And Required Suitable Load For Testing With Duly Varying The Load Upto 110% Of The Rated Capacity Load Test Certificate In Triplicate Set From Authorised Crane Inspector Duly Signed By Inspector Authority Of Crane Complete All As Specified And Directed By Engineer-In-Charge 4.00 Providing Material And Labour For Load Testing Of Over Head Travelling Crane Of Capacity 10 Ton Eot Crane As Per Manufacture Norm For Safe Working Rating Load Including Arrangment Of Dead Load Measurement Unit With Link Steel Wire Rope And Required Suitable Load For Testing With Duly Varying The Load Upto 110% Of The Rated Capacity Load Test Certificate In Triplicate Set From Authorised Crane Inspector Duly Signed By Inspector Authority Of Crane Complete All As Specified And Directed By Engineer-In-Charge 5.00 Supply And Fixing In Replacement Of Power Contactor 3 Phase Mnx Series / Freedom Series Type Or As Per Existing Sample / Model Of Rated Capacity 16 Amp To 32Amp 415 Volts Along With Suitable Rating Of Nc / No Type Auxilary Contactor Block Complete All As Specified And Directed By Engineer-In-Charge 6.00 Supply And Fixing In Replacement Of Power Contactor 3 Phase Mnx Series / Freedom Series Type Or As Per Existing Sample / Model Of Rated Capacity 12Amp To 15Amp 415Volts Along With Suitable Rating Of Nc / No Type Auxilary Contactor Block Complete All As Specified And Directed By Engineer-In-Charge 7.00 Supply And Fixing In Replacement Of Power Contactor 3 Phase Mnx Series / Freedom Series Type Or As Per Existing Sample / Model Of Rated Capacity 6Amp To 9 Amp 415Volts Along With Suitable Rating Of Nc / No Type Auxilary Contactor Block Complete All As Specified And Directed By Engineer-In-Charge 8.00 Supply , Fixing, Adjustment And In Replacement Of Unserviceable Ac Drive / Variable Frequency Drive ( Vfd ) / Frequency Convertor Device System For Suitable Capacitye Of 2 Kw Three Phase Supply System With Required Input 3 X Ac 380-480 Voltt , 50 / 60 Hz And Out Put 3 X Ac 0-480 Volt, Frequency 0-400 Hz With Having Setting Controling Devices System And Or All As Per Existing Sample / Rating / Model For Operating / Controlling Of Slow / High Speed For All Motion And Other Controlling System Etc For Smooth Functional Of Over Head Electric Traviling Crane Of Capacity 1 Ton And Including Making Controlling Cable Connection Of System And Testing On Load Complete All As Specified And Directed By Engineer-In-Chargemake : Abb / Rexroth / Scheinder / L&T Or As Approved By Ge. 9.00 Supply , Fixing, Adjustment And In Replacement Of Unserviceable Ac Drive / Verable Frequency Drive ( Vfd ) / Frequency Convertor Device System For Suitable Capacitye Of 4.0 Kw Three Phase Supply System With Required Input 3 X Ac 380-480 Voltt , 50 / 60 Hz And Out Put 3 X Ac 0-480 Volt, Frequency 0-400 Hz With Having Setting Controling Devices System And Or All As Per Existing Sample / Rating / Model For Operating / Controlling Of Slow / High Speed For All Motion And Other Controlling System Etc For Smooth Functional Of Over Head Electric Traviling Crane Of Capacity 5 Ton And Including Making Controling Cable Connection Of System And Testing On Load Complete All As Specified And Directed By Engineer-In-Charge Make : Abb / Rexroth / Scheinder / L&Tor As Approved By Ge. 10.00 Supply And Fixing In Replacement Of Unserviceable Dynamic Breaking Resistance ( Dbr ) Device Of Rating / Model 180R 1K2w Or 180Ej 1200W Type Or As Per Existing Sample / Model Suitable Of Oprating Operating Of Over Head Traviling For 2 Ton Eot Cranecomplete All As Specified And Directed By Engineer-In-Charge Make :Yesdee / Stead / / Onics Or As Approved By Ge. 11.00 Supply And Fixing In Replacement Of Single Phase Preventor Of Type Vsp 2 / Vsp3 Or As Per Existing Sample / Model Type With Having System Ac Supply 415 Volt 50 Hz Complete All As Specified And Directed By Engineer-In-Charge Make : - Minilac / Indo Power / Bintex Or Approved By Ge 12.00 Material And Labour In Replacement Of Step Down Transformer With Having Rating 440 Volt To 110 Volt A.C Upto 30 Va Capacity Or As Per Existing Size / Rating And Complete All As Specified And Directed By Engineer-In-Charge 13.00 Supply And Fixing In Replacemet With Flushing / Topping Of Gear Box Oil Saf-90 Grade Type Suitable For Oht Crane Lt, Ct, Hoist System Of Gear Box Complete All As Specified And Directedmake : Indian Oil Corporation / H.P. / B.P. / Bharat / Servo / Castrol Or As Approved By Ge 14.00 Supply And Fixing In Replacemet With Flushing / Topping Of Transformer Oil Suitable For Oht Crane Thruster Brake Assembly System Complete All As Specified And Directed By Engineer-In-Charge Make : Indian Oil Corporation / H.P. / B.P. / Bharat / Servo / Castrol Or As Approved By Ge 15.00 Supply And Fixing In Replacement Of Cable Carrier Reel System Suitable For 2.0 Ton Eot Crane Complete All As Specified And Directed By Engineer-In-Charge Make : Albrasco / Meagtech / Vimal Or As Approved By Ge 16.00 Material And Labour For Taking Down Of Unserviceable Motor From Oht Crane And Including Transporting And Re-Winding Of Electric Motor Of Capacity 0.75 / 1Hp, 3 Phase 415 Volts, With Supper Enameled Copper Conductor Wire As Per Existing Size / Gauge Including Making Varnishing Drying And Connecting Fixing Accessories Etc Including Refixing On Same Position And Testing On Load Complete All As Specified And Directed By Engineer-In-Charge 17.00 Matrerial And Labour For Taking Down Of Unserviceable Motor From Oht Crane And Including Transporting And Re-Winding Of Electric Motor Of Capacity 2Hp, 3 Phase 415 Volts, With Supper Enameled Copper Conductor Wire As Per Existing Size / Gauge Including Making Varnishing Drying And Connecting Fixing Accessories Etc Including Refixing On Same Position And Testing On Load Complete All As Specified And Directed By Engineer-In-Charge 18.00 Matrerial And Labour For Taking Down Of Unserviceable Motor From Oht Crane And Including Transporting And Re-Winding Of Electric Motor Of Capacity 3Hp, 3 Phase 415 Volts, With Supper Enameled Copper Conductor Wire As Per Existing Size / Gauge Including Making Varnishing Drying And Connecting Fixing Accessories Etc Including Refixing On Same Position And Testing On Load Complete All As Specified And Directed By Engineer-In-Charge 19.00 Matrerial And Labour For Taking Down Of Unserviceable Motor From Oht Crane And Including Transporting And Re-Winding Of Electric Motor Of Capacity 5Hp, 3 Phase 415 Volts, With Supper Enameled Copper Conductor Wire As Per Existing Size / Gauge Including Making Varnishing Drying And Connecting Fixing Accessories Etc Including Refixing On Same Position And Testing On Load Complete All As Specified And Directed By Engineer-In-Charge 20.00 Matrerial And Labour For Painting Of Eot / Hot Double Girder Traveling Over Head Travaling Eot / Hotcranes System Along With Trolly, Foot Parth , Railing System And Including Both Sides Girder And Its Connected Item Fixing Accessories / Equpts Complete For Crane System By Appplying Two Coats Of Flame Proof Paint Of Colour Golden Yellow / Tractor Orange / Gray Colour Or Existing Sample With Exising Making Painting As Per Existing Type Colour Code With Providing Painting Of Synthetic Ist Quality Paint After Scrapping Of Old Rusted Surface And Cleaning Of Oil And Greas , Soil Dust Partical Material By Manually With Sand Paper Suitable For Capacity Of 1 Ton To 10 Ton Crane ( Span Not More Than Upto 20 Mtrs & Guarder Length Not More Than Upto 25 Mtr Long ) Complete All As Specified And Directed By Engineer-In-Charge 21.00 Supplying And Fixing In Replacement Of Star / Stop Controller Push Bottom With Electric Terminal Connetor Block / Elements ( No / Nc Type ) As Per Existing Sample / Size Suitable For Crane Complete All As Specified And Directed By Engineer-In-Charge Make -Bch / Technique / L&T / Vaishnow / Telemecnic / C&S / Or As Approved By Ge 22.00 Supplying And Fixing In Replacement Of Main Emergency Star / Stop Bottom With Electric Terminal Connetor As Per Existing Sample / Size Suitable For Crane Complete All As Specified And Directed By Engineer-In-Charge 23.00 Supplying And Fixing In Replacement Of Electric Terminal Connector Block / Elements ( No / Nc Type ) As Per Existing Sample / Size Suitable For Crane Complete All As Specified And Directed By Engineer-In-Charge 24.00 Supplying And Fixing In Replacement Of Flexible Type Steel Wire Suspension Rope Heavy Duty Of Size 16 Mm Dia Suitable For Lifting / Carring Of Load Suitable For 10 Ton Eot Crane And Including Testing On Load Complete All As Specified And Directed By Engineer-In-Charge. Make - Mahadev / Usha Martion Or As Approved By Ge 25.00 Supplying And Fixing In Replacement Of Flexible Type Steel Wire Suspention Rope Heavy Duty Of Size 8 Mm Dia Suitable For Lifting / Carring Of Load Suitable For 2 Ton To 5 Ton Eot Crane And Including Testing On Load Complete All As Specified And Directed By Engineer-In-Charge. Make - Mahadev / Usha Martion Or As Approved By Ge 26.00 Supply And Fixing In Replacement Of Unserviceable Rubber Buffer As Per Existing Sample / Type Suitble For 1 Ton To 10 Ton Eot Crane Complete All As Specified And Directed By Engineer-In-Charge 27.00 Material And Labour For In Taking Down And Repair Of Existing Thruster Brake Assembly Unit And Including Rewinding Of Thuster Brake Unit As Per Existing Type / Gauge Of Winding Matterial And Replacement Of Oil Seal With Connecting Fixing Accessories As Per Existing Sample / Model Suitable For 1 Ton To 10 Ton Eot Cranes And Testing On Load Complete All As Specified And Directed By Engineer-In-Charge 28.00 Supply And Fixing In Replacement Of Unserviceable Worn Out Electromagnetic Flame Proof Thuster Brakes Set Suitable For Holding The Pressure Up To 18 Kg / Cm2 Or As Per Existing Sample / Type Along With Connecting Fixing Accessories As Per Existing Sample / Model Suitable For 1 Ton To 10 Ton Eot Cranes Complete All As Specified And Directed By Engineer-In-Charge 29.00 Supply And Fixing In Replacement Of Unserviceable Bushed / Ball Bearing As Per Existing Sample / Model Suitable Of Oprating Of Traviling System For 1 Ton To 10 Ton Eot Crane Complete All As Specified And Directed By Engineer-In-Charge 30.00 Supply And Fixing In Replacement Of Unserviceable Flanged Type Wheel Ball Bearing As Per Existing Sample / Model Suitable Of Operating Of Traviling System For 1 Ton To 2 Ton Eot Crane Complete All As Specified And Directed By Engineer-In-Charge. Make :Skf / Nbc / Or Equivalent Model And Make Approved By Ge 31.00 Supply And Fixing In Replacement Of Unserviceable Metal Body Flame Proof Weather Proof Rotary Gear Type Limit Switch Assembly With Having Ip 65 Protection As Per As Per Existing Sample / Model Suitable For Safe Working Oprating Of Up / Down Operating Motion / Hoisting System For Eot Crane Of Capacity 1 Ton To 10 Ton Complete All As Specified And Directed By Engineer-In-Charge. Make Shyaam / Sudhir / Skf / Siemens / Mascot / Bharat / Duplex / Baliga / Rolex Or Approved By Ge 32.00 Supply And Fixing In Replacement Of Unserviceable Metal Type Flame Proof Weather Proof Junction Box As Per Existing Sample / Model / Make Suitable For Safe Electric Wire Connection System For Upto 10 Ton Eot Crane Complete All As Specified And Directed By Engineer-In-Charge. Make Shyaam / Sudhir / Bharat Or Approved By Ge 33.00 Supply And Fixing In Replacement Of Flame Proof Suspension Type Pendent / Hanging Controling Unit Controlling Unit With Flame Proof Start / Stop Push Buttons With Indicator Lamp And Emergency Control Switch, Lifting Hook For Up And Down, Long Travel Motion, Cross Travel And Conneting To Controling Micro Speed Panel Suitable For Safe And Smooth Operating System Of Eot Crane Of 1 Ton To 2 Ton Capacity Including Making Cable Connection And Testing Complete All As Specified And Directed By Engineer-In-Charge. Make: Bch / Shyam / Sudheer Or Equivalent Model And Make Or Approved By Ge 34.00 Supply And Fixing In Replacement Of Unserviceable Gear Box Oil Seal, Cover Paking Seal , Gear Box Ball Bearing Etc Or Other Defected Connecting Parts As Requred At Site As Per Existing Sample / Type And Making It Oil Leak Proof And Sound Less Proof Complete And Including Testing On Load Of 2 Ton Eot Crane Complete All As Specified And Directed By Engineer-In-Charge 35.00 Supply And Fixing In Replacement Of Unserviceable Metal Body Wheel Brushes / Bearing And Washer Suitable For Safe Operation System As Per Existing Sample / Model Suitable For Complete All As Specified And Directed By Engineer-In-Charge 36.00 Dismantling Of Existing Reduction Gear Box With Device For Hoist / Ct / Lt Motion Traverse For Eot Cranes Of Load 1 Ton To 10 Ton Capacity And Carrying Out Replacement Of Following Unserviceable Parts / Carrying Out Misc Repair And Refixing The Gear Box After Checking Alignment Of Brake Drum & Motor And Motor & Gearbox , In Existing Position, Complete All As Specified And Directed By Engineer-In-Charge ( A ) Replacing The Worn Out Shaft Seals & Bearing ( B ) Replacement Of Internal Cover Gasket, ( C ) Replecment Of Gear Coupling With Nuts & Bolts Complete. 37.00 Supply And Fixing Of Electro Hydraulic Thruster Mounting Assembly Complete Suitable For Mounting Of 34 Kgs Size / Capacity Hydraulic Thruster All As Existing Type With Nut, Bolts Etc Including Dismantling And Removing Old Unserviceable Thruster Assembly For 10 Ton Eot Crane. Complete All As Specified And Directed By Engineer-In-Charge 38.00 Taking Down Copper / Aluminium Point Wiring ( Light, Fan, Socket Or Power ) Complete, Including Fixture And Fittings Such As Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fitting Etc. Removing Materials To Store For Keeping In Safe Custody Or For Taking Credit ( Credit For Above Items Should Be Made As Per Conditions Separately ) And Making Good Disturbed Surfaces Of Walls, Floors, Etc Complete All As Specified And Directed By Engineer-In-Charge 39.00 Material And Labour For Point Wiring Complete With 1.5 Sqmm Single Core Multistranded Frls Pvc Insulated Sheathed Copper Conductors 1100 Volts Grade Drawn Through & Including Pvc Casing / Caping Of Suitable Size, Isi Marked With Accessories Concealed In Wall / Ceiling / Truss Including Cutting Chases, Pinning In Etc With Pvc Non Metallic Isi Marked Terminal Boxes Concealed Wall Including One Frls Pvc Insulated & Sheathed Multistranded Green Colour Copper Conductor 1.5 Sqmm As Earth Continuity Conductor Connected To Common Earth As Earth Dolly For The Following :- 39.01 One Light Point Controlled By One Switch Sp One Way. 39.02 One Ceiling Fan Point Controlled With One 5A Switch 39.03 One Exhaust Fan Point Controlled With One 5A Switch 39.04 One 3 Pin Socket Outlet 5Amps On Independant Board. 39.05 One 3 Pin Socket Outlet 5Amps On Same Board With Other Switches. 39.06 One Bell Point Controlled By One Bell Push 5 Amps. 39.07 One 3 Pin Socket Outlet 15 Amps On Same Board With Other Switches. 40.00 Material And Labour For Point Wiring Complete With 4 Sqmm Single Core Multistranded Frls Pvc Insulated Unsheathed Copper Conductors 1100 Volts Grade Drawn Through & Including Pvc Casing / Caping Of Suitable Size , Isi Marked With Accessories Concealed In Wall / Ceiling / Truss Etc With Pvc Non Metallic Isi Marked Terminal Boxes Conealed In Wall Including One Frls Pvc Insulated & Unsheathed Multistranded Green Colour Copper Conductor 4 Sqmm As Earth Continuity Conductor Connected To Common Earth As Earth Dolly Complete All As Specified And Directed By Engineer-In-Charge. 41.00 Material And Labour Point Wiring For 15 Amps Socket Complete With 2.5 Sqmm Single Core Multistranded Frls Pvc Insulated Unsheathed Copper Conductors 1100 Volts Grade Drawn Through And Including Pvc Non-Metallic Casing And Caping Of Size Not Less Than 20 / 25 Mm Dia Including Pvc Bend, Tee Joints Etc As Per Site Requirement, Isi Marked With Accessories Fixed On Wall / Ceiling / Truss Etc With Pvc Non Metallic Isi Marked Terminal Boxes / Modular Boxes Surfacing On Wall Including One Frls Pvc Insulated & Unsheathed Multistranded Green Colour Copper Conductor 4 Sqmm As Earth Continuity Conductor Connected To Common Earth As Earth Dolly. 42.00 Supply And Fixing Modular Switch , 6Amp, One Way, 1 Module, Isi Marked Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Nixon ) . 43.00 Supply And Fixing Modular Switch , 16Amp, One Way, 1 Module, Isi Marked Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Nixon ) . 44.00 Supply And Fixing Modular Socket , 6 Amps, 2 / 3 Pin Combined 3 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Nixon ) . 45.00 Supply And Fixing Modular Socket , 16Amps, 6 Pin Combined 3 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Nixon ) . 46.00 Supply And Fixing Modular Type Bell Push , 6Amp, 1 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Nixon ) . 47.00 Supply And Fixing Bell Electric Ac 230Volt Single Pole Musical Type, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Nixon ) . 48.00 Supply And Fixing Modular Type, Electronic Fan Regulator ( 5 Step ) , 120 Watts, 230 Volts, 2 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Nixon ) . 49.00 Supply And Fixing Ceiling Rose Surface Bakelite With Isi Mark, Flush Type With Isi Mark Three Terminals Complete All As Specified And Directed. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Nixon ) . 50.00 Supply And Fixing Modular White Cover Plate With Frame 2 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 51.00 Supply And Fixing Modular White Cover Plate With Frame 3 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 52.00 Supply And Fixing Modular White Cover Plate With Frame 4 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 53.00 Supply And Fixing Modular White Cover Plate With Frame 6 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 54.00 Supply And Fixing Modular White Cover Plate With Frame 8 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 55.00 Supply And Fixing Modular White Cover Plate With Frame 12 Module. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 56.00 Supply And Fixing Modular Metal Flush Box 2 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 57.00 Supply And Fixing Modular Metal Flush Box 3 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 58.00 Supply And Fixing Modular Metal Flush Box 4 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 59.00 Supply And Fixing Modular Metal Flush Box 6 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 60.00 Supply And Fixing Modular Metal Flush Box 8 Module , Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 61.00 Supply And Fixing Modular Metal Flush Box 12 Module, Isi Marked. Make : Legrand ( Arteor ) / Havells ( Coral ) / Gold Medal Electrical Pvt Ltd ( Wega ) 62.00 Supply And Fixing Baton Integral Sleek Extruded Polycarbonate Led Channel With White Acrylic Cover Of 1X18wh With Accessories Internally Prewired And Incl Connecting Up With Twin Core Twisted Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed By Engineer-In-Charge. 63.00 Supply And Fixing Baton Integral Sleek Extruded Polycarbonate Led Channel With White Acrylic Cover Of 1X20wh With Accessories Internally Prewired And Incl Connecting Up With Twin Core Twisted Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed By Engineer-In-Charge. 64.00 Supply And Fixing Baton Integral Sleek Extruded Polycarbonate Led Channel With White Acrylic Cover Of 1X10 Wh With Accessories Internall Prewired And Including Connecting Up With Twin Core Twisted Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed By Engineer-In-Charge . 65.00 Taking Down Unserviceable Light And Supply And Fixing Ceiling Light 36 Watt 2 Ft X 2 Ft Recess Mounting Led Ultra Slimceiling Light With Extruded Aluminium Housing And Milky Diffuser.Led Ultra Slim Panel:Cygnus Series Complete All As Specified And Directed By Engineer-In-Charge 66.00 M&L For Lamp Holder, Pvc / Polycarbonate Type With Cord Grip Cap Suitable For Pendant Fittings Complete All As Specified And Directed By Engineer-In-Charge 67.00 Supply And Fixing Led Lamp Suitable For 14 Watts, 240 Volts, Single Phase, 50 Hz, Lumen 1450 Ac Supply Complete All As Specified And Directed By Engineer-In-Charge 68.00 Supply And Fixing 12 Way Double Door Type Having Protection Ip-42, With 200 Amps Rated Bus Bar Connecting With Existing Wiring Circuits By Providing Copper Pin Terminals Of Suitable Size Complete All As Specified And Directed By Engineer-In-Charge 69.00 Supply And Fixing Mcb, Db, Spn 8 Way Double Door With Protection Type Ip-42 With 200 Amps Rated Bus Bar Connecting With Existing Wiring Circuits By Providing Copper Pin Terminals Of Suitable Size Complete All As Specified And Directed By Engineer-In-Charge. 70.00 M&L For Sheet Metal Enclosures For Db 2 Way With 100 Amp Rated Busbar Of 240 V Complete All As Specified And Directed By Engineer-In-Charge 71.00 Supply And Fixing Mcb Tpn ( Four Pole ) 100 Amps, 240 Volts, 10 Ka Complete All As Specified And Directed By Engineer-In-Charge 72.00 Supply And Fixing , Mcb Spn 63 Amps, 10 Ka Rating Complete All As Specified And Directed By Engineer-In-Charge 73.00 Supply And Fixing , Mcb Sp 6-32 Amps, 10 Ka Rating Complete All As Specified And Directed By Engineer-In-Charge 74.00 Taking Down Old Unserviceable Submain Cable Of Any Size And Capacity And Finishing Wall Surfaces Complete All As Specified And Directed By Engineer-In-Charge 75.00 Supply And Fixing Submain Wiring With Proper Colour Coding, 2 Single Core Frls 1100 Volts Grade Cable With Stranded Copper Conductor Of Size 4 Sqmm In And Including Pvc Conduit Of Suitable Size, Isi Marked Including 1 Single Core Cable With Stranded Copper Conductor Of Size 4 Sqmm ( Green Colour ) For Earthing Complete All As Specified And Directed. Note : 2 Runs Of 4 Sqmm Cable, 1 Run Of Pvc Conduit And 1 Run Of 4 Sqmm Cable Shall Be Measured As 1 Run. 76.00 Taking Down Old Unserviceable Mccb .Supply And Fixing Mccb, 415 Volts, 4 Pole Of Cap Dpx 630 Amps, 50 Ka, Ics = 100% Icu Complete All As Specified And Directed By Engineer-In-Charge. Make : L &T / Legrand / Strandred / Hpl 77.00 Taking Down Old Unserviceable Mccb .Supply And Fixing Mccb, 415 Volts, 3 Pole Of Cap 400 Amps, 50 Ka, Ics = 100% Icu Complete All As Specified And Directed By Engineer-In-Charge. Make : L &T / Legrand / Strandred / Hpl. 78.00 Supply And Fixing Plug And Socket Enclosure, In Sheet Metal Enclosure With Mcb, Sp 20 Amps 240 Volts Complete With Metal Clad Socket For Window Type Air Conditioners. Make : Siemens Cat-8Gb0501rc Or Equivalent In Ge / Legrand. 79.00 Taking Down Old Unserviceable Street Light Of Any Capacity From Existing Pole / Truss Of Any Size And Height And Fixing Only Flood Light / Street Light Of Any Capacity Complete All As Specified And Directed By Engineer-In-Charge. Streel Light Issued By Deptt. 80.00 Supply And Fixing In Replacement Led Driver For Street Light / Highbay Light Fitting / Flood Light Upto 90 Watt Of Any Type And Size Etc To Match With Existing Complete All As Specified And Directed By Engineer-In-Charge. 81.00 Supply And Fixing In Replacement Led Driver For Street Light / Highbay Light Fitting / Flood Light 100 Watt To 250 Watt Of Any Type And Size Etc To Match With Existing Complete All As Specified And Directed By Engineer-In-Charge.
Contract Date: Jan 06, 2023 Contract Value : ₹ 45.34 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 9
Maharashtra View Result →
40.
Defence #1973507 AOC
Repair Of Certain Eot Crane At Air Force Station Pathankot , 1 . repair , maint and making the fully functioning of electric operated crane of capacity given below , after checking long travell motion , cross travel motion , hoisting motion ( electrically and mechanically ) in presence of user rep and mes rep & rectify any type of defects immediately when found including servicing , greasing , oiling & carrying out routine maintenance as directed by engineer in charge ( note :- ( i ) any accessories found unserviceable that shall be replaced under respective items ( ii ) : labour for lowering , mounting arrangement such as ladder , pully block , rope system and other connected mechanism shall be contractor arrangement and rates are deem to be included in this job . no extra payment will be made to the contract against lowering/lifting the spare etc at a height of 20 to 40 ( a ) servicing and load testing of eot crane of capacity 10 ton - 01 job ( b ) servicing and load testing of eot crane of capacity 2 ton - 02 job ( c ) servicing and load testing of eot crane of capacity 1 . 5 ton - 01 job ( d ) servicing and load testing of eot crane of capacity 0 . 3ton - 02 job 2 . electro hydraulic operated brake suitable long travel motion of eot crane of capacity 2 ton - 02 job 3 . electro hydraulic operated brake suitable cross motion of eot crane of capacity 2 ton - 02 job 4 . m & l for thruster flame proof suitable for crane of capacity 2 ton - 02 job 5 . m/l gear oil suitable for eot crane up to 10 ton cap as per manufacture recommendation or directed by engr in charge . - 55 ltrs 6 . m/l grease ( industrial grade ) suitable for eot crane up to 10 ton cap as per manufacture recommendation or directed by engr in charge . - 4 kg 7 . m/l of 6 mm steel wire rope for bearing capacity of 0 . 3 ton eot crane - 48 mtrs 8 . m/l of 8 mm steel wire rope for bearing capacity of 1 . 5 ton eot crane - 148 mtrs
Contract Date: Dec 31, 2020 Contract Value : ₹ 2.78 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Punjab View Result →
41.
Defence #1825235 AOC
Tender For Repair And Maintenance Of Eot Cranes, Em Equipment At Fire Fighting Installations, Lift At Itr And Lcs Area Chandipur - Comprehensive Maintenance Of Lift Of Capacity One Ton Serving For Ground Floor Plus Two Floorsby Replacing The Trailing Cable, Checking Of All Power Wiring Termination, Upper And Lower Limit Switches For Proper Connection, Checking / Adjusting Guide Clamp, Check All The Locks Functioning Properly Mechanically And Electrically After Opening The Covers, Check All Sets Of Screws And Spring And Replace Where Necessary So That The Lever Should Lock The Brake Properly For Smooth Operation Of Lift , Repair / Maintenance Of All Door Shuttersof Lift Serving For G+2 Floors By Repairing / Replacing Minor Unserviceable Parts, Complete Greasing Andcarrying Out Door Adjustment, Guideclamp Adjustment, Locking System Etc. For Smooth Functioning Of All Door Shutters Complete And All As Specified Anddirected By Engineer-In-Charge.Note:- Testing Of Lift Will Be Done By Any Approved Local Agency And Cost Of Testing Will Be Paid By Contractor. 3 Repair / Overhauling Thehydraulic Thruster Break Of 2 To 5 Tonne Eot Crane With Gear Holdinghoist / Cross Travel / Long Travel, Rewinding The Burn Out Winding Ofthruster Coil With Super Enamel Copper Wire Of Existing Gauge And Varnishing, Heating And Testing Etc Complete Repairingall As Required Including Draining Out Used Oil All As Specified And Directed. 4 Repair / Overhauling Thehydraulic Thruster Break Of 10 To 20 Tonne Eot Crane With Gear Holdinghoist / Cross Travel / Long Travel, Rewinding The Burn Out Winding Ofthruster Coil With Super Enamel Copper Wire Of Existing Gauge And Varnishing, Heating And Testing Etc Complete Repairingall As Required Including Draining Out Used Oil All As Specified And Directed. 5 Supply And Filling Of Gear Oil In Gear Box Of Lift Andeot Crane Including Top Up All As Specified And Directed . 6 Supply And Filling Of Transformer Oilsuitable For Electro Hydraulic Thruster Break Ofeot Crane Including Top Up All As Specified And Directed . 7 Supply And Fix Brake Shoesin Pair ( 02 Nos ) On Drum Diameter 100 To 200 Mm Suitable For 2 To 5 Ton Cranewith Necessary Fittings Complete Including Taking Down Old Unserviceable One All As Directed. 8 Supply And Fix Brake Shoesin Pair ( 02 Nos ) On Drum Diameter 100 To 200 Mm Suitable For 10 To 20 Ton Cranewith Necessary Fittings Complete Including Taking Down Old Unserviceable One All As Directed. 9 Supply And Fix1.5 Sqmm, 12 Core Trs Flexible Cable With Copper Conductors , 1100 V Including Provision Of Movable Clampsincluding Taking Down Old Unserviceable Cable. 10 Supply And Fix Flexible Copper Cable Of Size 10 Sq Mm, 4 Core, 1100 V Including Provision Of Movable Clampsincluding Taking Down Old Unserviceable Cable. 11 Supply And Fix Flexible Copper Cable Of Size 4 Sq Mm, 4 Core 1100V , Conferming Is:694Including Provision Of Movable Clampsincluding Taking Down Old Unserviceable Cable. 12 Supply And Fixcopper Cable Of Size 50 Sq Mm, 4 Core 1100V , Conferming Is:694Including Provision Of Movable Clampsincluding Taking Down Old Unserviceable Cable. 13 Supply And Fix Rotary Type Limit Switch With 40:1 Ratio For Hoist Motion Suitable For 2 Tonne To 10 Tonne Capacity Eot Crane Main Hoist, Make : Speedocontrol / Siemens / Cmk Electropower 14 Supply And Fix Levertype Limit Switch For Ct / Lt Suitable For 2 Tonne To 10 Tonne Capacity Eot Crane Main Hoist, Make : Speedocontrol / Siemens / Cmk Electropower. 15 Repair Of Electromagnatic Brake Coil Suitable For 2 To 5 Tonne Capacity Craneall As Directed And Specified. 16 Repair Of Electromagnatic Brake Coil Suitable For 10 To 20 Tonne Capacity Craneall As Directed And Specified. 17 Supply And Fix Split Pillow Two Bolt Blockhousing As Per Existing Sizes For Long Travel / Cross Travel Shaft End Support Including Taking Down Old Unserviceable One Suitable For 2 To 10 Tonne Crane ( Make –Skf / Nbc / Fag ) 18 Supply And Fix Non Friction Spherical Ball Bearing As Per Existing Sizes 22210 / 22211 For Hoist End / Long Travel / Cross Travel Shaft Supportin Split Pillow Two Bolt Blockhousing Including Taking Down Old Unserviceable One All As Directed And Specified. ( Make – Tata / Skf / Nbc ) 19 Supply And Fix Pillow Blockhousing ( As Per Existing Model ) With Bearing Uc 208 Series As Per Existing Size For Shaftfor Long Travel / Cross Travel Shaft Support To Arrest Redial Movement Including Taking Down Old Unserviceable One:- ( Make –Skf / Nbc / Fag ) 20 Dismantling Of Long Travel / Cross Travellgear Boxof Eot Crane Capacity 2 To 10Tonne Removing It From Its Position Carefully And Transporting To The Work Shop And Refixing The Same To Its Original Positions After Servicing Andremetalingofworn Out Gears And Followers And Machining The Gear Shaftcomplete All As Directed. Note: ( I ) Consumable Stores Like Cotton Waste / Cleaning Materials , Metal Filling , Machining , Packing Seals, Gasket , Nuts, Bolts And Washers And Transportationfrom Site To Work Shop Are Deemed To Be Included Inrate Quoted. ( Ii ) Bearing, Gear Oil To Be Measured And Paid Separately 21 Supply And Fix Non Friction Spherical Ball Bearing As Per Existing Sizes 6310 For Long Travel / Cross Travel Gear Box Including Taking Down Old Unserviceable One All As Directed And Specified. ( Make – Tata / Skf / Nbc ) 22 Supply And Fix Bimetal Over Load Relay Of Range 20 To 32 Amps For Any Capacity Ofeot / Hot Crane Including Taking Down Old Unserviceable One All As Directed And Specified. ( Make – Bch / Siemens / L&T ) 23 Supply And Fix Bimetal Over Load Relay Of Range 16 To 25 Amps For Or Any Capacity Ofeot / Hot Crane Including Taking Down Old Unserviceable One All As Directed And Specified. ( Make – Bch / Siemens / L&T ) 24 Supply Only Grease For Servicing Of Eot Cranes All As Specified And Directed. 25 Repair To Step Down Transformer Of Pri.V. 230 , Sec.V. -110, Va 200 , Cycle 50Hz Suitable For 2 To 5 Tonne Capacity Eot Crane All As Specified And Directed . 26 Repair To Step Down Transformer Of Pri.V. 415 , Sec.V.-110, Va 200 Cucle 50 Hz Suitable For 10 To 20Tonne Capacity Eot Crane All As Specified And Directed . 27 S& F In Repair Thermal Overload Relay Of Range Rr 3.8 To 6 Amps Complete All As Directed. 28 S& F In Repair Thermal Overload Relay Of Range Rr 6 To 9.3 Amps Complete All As Directed. 29 S& F In Repair Thermal Overload Relay Of Range Rr 8.9 To 13.5 Amps Complete All As Directed. 30 S& F In Repair Thermal Overload Relay Of Range Rr 22 To 30 Amps Complete All As Directed. 31 S& F In Repair Thermal Overload Relay Trip Class Of 10 Amps Complete All As Directed. 32 S&F In Repairpower Contactor Of Capacity 40 Amps, Ac 3Phase, 415 Volts Main Contactor Coil Voltage 110 Volttype Ce15fn3including Taking Down Old One All As Directed.Make – Bch / Hager / L&T 33 S&F In Repairpower Contactor Of Capacity 12 Amps, Ac 3 Phase, 415 Volts Main Contactor Coil Voltage 110 Volt Type Ce15cnc3including Taking Down One All As Directed.Make – Bch / Hager / L&T 34 S&F In Repairpower Contactor Of Capacity 9.1 Amps, Ac 3 Phase, 415 Volts Main Contactor Coil Voltage 110 Volt Type Ce15bns3including Taking Down Old One All As Directed.Make – Bch / Hager / L&T 35 S&F Mcb Tpn 32 Amps Rating 415 Volts C Series. 36 Supply And Fix Mccb 4 Pole, Current Rating 100 Amp, Breaking Capacity 25Ka At 415V, 50Hz Including Connection And Testing Complete All As Directed. 37 M&L For Spraypainting To Completeeot Cranes Of 2 To 20 Ton Capacity With A Ct Spanup To Maximum Of 18 Mtrs And A Hook Height Maximum Up To Of 10Mtrs With Lt Span, Completeincluding Preparing The Surfaces By All Suitable Means By Removing The Old Paint With Sand Paper And Spray Painting The Complete Parts Ofcrane Withonecoat Of Approved Synthetic Enamel Paint Of Superior Quality Over One Coat Of Red Oxide , And Writing Machine No With Synthetic Enamel Paint Different From Crane Body Colour On The Crane Complete All As Directed By Engineer-In-Charge. 38 Servicing Of Various Components Of Eot / Hotcrane Of Capacity Range From 2 Tonne To 5 Tonne Of Any Span Of Cross / Long Travel And Height Of Hoist For Carrying Out Over Hauling And Repairingvarious Items, Refixing The Components In Its Position After Carrying Out Overhauling And Repairing Workincluding Checkingand Re-Wiring Of Crane Control Panel Faulty Electrical Circuit Usingcontrol Copper Conductor, Making All Electric Connections Functional , Cleaning Of Tracks With Approved Cleaners, Greasing For Smooth Running Of Wheels, Pulleys, Steel Wire Rope Etc And Load Testing Of Craneafter Carrying Out All Repair Works All As Specified And Directed.Note:- ( I ) Loads As Required For Testing Shall Be Arranged By The User. ( Ii ) Transportation Of Loads For Testing From The Place Of Issue And Return To The Place Of Issue Shall Be Responsibility Of The Contractor. 39 Servicing Of Various Components Of Electrically Operated Crane Of Capacity 10 To 20 Tonne Of Any Span Of Cross / Long Travel And Height Of Hoist For Carrying Out Over Hauling And Repairingvarious Items, Refixing The Components In Its Position After Carrying Out Overhauling And Repairing Workincluding Checkingand Re-Wiring Of Crane Control Panel Faulty Electrical Circuit Usingcontrol Copper Conductor, Making All Electric Connections Functional , Cleaning Of Tracks With Approved Cleaners, Greasing For Smooth Running Of Wheels, Pulleys, Steel Wire Rope Etc And Load Testing Of Craneafter Carrying Out All Repair Works All As Specified And Directed.Note:- ( I ) Loads As Required For Testing Shall Be Arranged By The User. ( Ii ) Transportation Of Loads For Testing From The Place Of Issue And Return To The Place Of Issue Shall Be Responsibility Of The Contractor. 40 Dismantling And Taking Down Of Hoist / Creap / Lt / Ctunservicableelectric Motor Of Eot Crane, 415 Volts3 Phase , 5 Hp Capacity, Disconnection Of Incoming Electric Connection From Panel, Gear Box And Transported To Workshop , Stripping Out Burnt Wiring, Cleaning Slots And Rewinding The Motor With Super Enameled Copper Wire As Per Existing Size And Gaugeincluding Insulating Materials And Varnishing, Replacing Worn Out Bearing As Per Existing Size, Reassembling The Motor After Rewinding And Mounting On Its Original Position Including Replacing The Old Unserviceable Nuts, Bolts And Tested Completed All As Directed . 41 All As Per Sl Item No.39 Above But Of Capacity 3 Hp 42 All As Per Sl Item No.39 Above But Of Capacity 1 Hp 43 Supply And Fix In Repair Ci Sluicevalveflangedof Class Pn 1.6 Conforming To Is - 14846 Complete With Iron Wheel Head , Ss / Gun Metal Spindle And Check Nut , Includingjointing Material Such As Rubber Insertionnuts, Bolts Andwashers Etc Complete Of 80 Mm Dia Bore Pipe . Make - Kirloskar / Upadhaya / Zoloto Or Equivalent Make List As Per Appendix-A. 44 All As Per Sl Item No. 42 But Size Of 100 Mm Dia Bore. 45 All As Per Sl Item No. 42But Size Of 150 Mm Dia Bore. 46 All As Per Sl Item No. 42But Size Of 200 Mm Dia Bore. 47 Supply And Fix In Repair Cinon - Return Valves , Isi Marked , Heavy Duty , Flangedtype Including Rubber Sheet & Nut Bolts Etc Completeall As Specified By The Engr-In-Charge For80 Mm Dia Boremake - Kirloskar / Upadhaya / Zoloto Or Equivalent 48 All As Per Sl Item No. 46 But Size Of 100 Mm Dia Bore 49 All As Per Sl Item No. 46But Size Of 150 Mm Dia Bore 50 All As Per Sl Item No. 46But Size Of 200 Mm Dia Bore 51 Dismantling And Taking Down The Electric Motor Of Fire Pump Set 100 Hp Capacity And Transporting To Work Shop And Carrying Out Servicing / Maintenance Of Motor Unit As Per The Following Maintenance Work:- ( A ) Opening Of Electric Motor And Cleaning / Removing Dust From Armature Andfield Coil ( B ) Cleaning Of Used / Old Lubricated Substance ( C ) Cleaning Of Starter And Rotor Unit ( D ) Checking And Tightening Of Coupling, Nuts, Bolts And Replacement Of Rubber Insert. ( E ) Carrying Out Heat Varnishing With Varnish Solution Of Best Quality For Field And Armature Coil. ( F ) Replacement Of Oil Worn Out Bearings. ( G ) Reassembling The Complete Motor And Carrying Out Testing At Work Shop And Transporting Back To Installation And Coupling With Pumping Set Including Necessary Alignment, Cable Connection All As Directed. 52 Dismantling And Taking Down Pump Of Fire Pumpset Assembly And Transporting To Workshop And Carrying Out Servicing / Maintenance Of Pump Unit Of Capacity 3000 Lpm, 7.5 Kg / Sqcm And 75 M Head As Per The Following Scope Of Work, Opening Of Pump Assembly And Cleaning & Remvoing Of Dirt.Repair To Pump By Replacement Of Worn Out Gland Cap, Gland Bush, Coupling And Bearing, Repairing Of Worn Out Shaft, Impeller By Suitable Re-Metalling, Finishing Up To Suitable Size And Doing Necessary Heat Treatment, Replacement Of Impeller Key With New One Including Necessary Heat Treatment, Reassembling The Pump After Repairs, Including Replacement Of All Nuts, Bolts, Washers, Gland Packing, Greasing Etc And Fixingthe Pump In Its Original Position / Foundation And Testing On Load Complete And All As Directed And As Specified. 53 Disconnecting And Taking Out The Electric Driven Jockey Pump Motorof Capacity 18.5 Kw ( Kirloskar Make ) , By Disconnecting The Pump Motor Coupling, Inlet And Outlet Pipe Line For Foundation.Repair To Motor By Replacement Of Burn Out Windings Of Stator / Rotor, Coupling And Bearing, Repairing Of Worn Out Spare Parts , Reassembling The Motor After Repairs, Including Replacement Of All Nuts, Bolts, Washers, Gland Packing, Greasing Etc And Fixingthe Motor In Its Original Position / Foundation And Testing On Load Complete And All As Directed And As Specified. 54 Disconnecting And Taking Out The Electric Driven Jockey Pumpof Discharge Capacity 500Lpm At 7.5 Kg / Sqcm By Disconnecting The Pump Motor Coupling, Inlet And Outlet Pipe Line For Foundation Etc.Repair To Pump By Replacement Of Worn Out Gland Cap, Gland Bush, Coupling And Bearing, Repairing Of Worn Out Shaft, Impeller By Suitable Re-Metalling, Finishing Up To Suitable Size And Doing Necessary Heat Treatment, Replacement Of Impeller Key With New One Including Necessary Heat Treatment, Reassembling The Pump After Repairs, Including Replacement Of All Nuts, Bolts, Washers, Gland Packing, Greasing Etc And Fixingthe Pump In Its Original Position / Foundation And Testing On Load Complete And All As Directed And As Specified. 55 S&Fon Load Change Over Switch 200 Amps 4 Pole For Open Mount Including Taking Downold Change Over Switch All As Directed. 56 S&Fin Repairson Load Change Over Switch 100 Amps 4 Pole In Existing Panel Including Taking Downold One Complete All As Directed. 57 S& F In Repair Off Load Change Over Switch Side Handle Operated In Ss Sheat Enclosure Of Rating 100 Amps Four Poles All As Specified And Directed. 58 S&Fms Erw Pipe Of 80 Mm Dia Pipe With Provision Of Necessary Ms Bend, Ms Flange Etc, By Cutting And Welding And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Primer And Testing Including Taking Down Old Ms Pipe. ( Make – Bansal / Tata / Jindal ) 59 S&Fms Erw Pipe Of 100 Mm Diapipewith Provision Of Necessary Ms Bend, Ms Flange Etc, By Cutting And Welding And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Primer And Testing Including Taking Down Old Ms Pipe. ( Make – Bansal / Tata / Jindal ) 60 S&Fms Erw Pipe Of 200 Mm Dia Pipe With Provision Of Necessary Ms Bend, Ms Flange Etc, By Cutting And Welding And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Primer Ant Testing Including Taking Down Old Ms Pipe. ( Make – Bansal / Tata / Jindal ) 61 Supply And Fabrication Of Fire Hydrant Hose Box Of Size 800 Mmx 600 Mmx 250 Mm With 3 Mm Thick Double Door With 4 Mm Thick Glasses And Door Frame Made Of 16 Gaugems Sheet And 40Mmx 40Mm X 6Mm Thick Iron Angle Support At 1.5 Mtr Height Including Grouting, Painted Fire With Red Outside And Brilliant White Inside Box Including Taking Down Old Unserviceable All As Specified . 62 S&F In Repairs Fire Fighting Canvas Hose Pipe, Fire Chief Brand, Cotton Synthetic Fibre, Circular Woven Jacketed Rubberized Fabric Reinforced Rubber Lined ( Rrl ) , 35.7 Kg / Cm2 Burst Pressure And 22 Kg / Cm2 Proof Pressure, 63 Mm Dia Of 15 Mtr Long With Male And Female Gm Coupling Of 63 Mm Diaall As Specified . ( Make – Zenith / Jyoti / Fire Shield ) . 63 S&F In Repairs Fire Fighting Branch Pipe Gun Metal 63Mm Instantaneous Inlet, Made Threaded Outlet, 15Mm Bore Nozzle Short All As Specified . ( Make – Zenith / Jyoti / Fire Shield ) 64 S&Fin Repairs Fire Fighting Gm Landing Valve ( Hydrant Valve Single Headed ) With 80 Mm Nb Flanged Inlet Brass Spindle 63 Mm Dia Female Oblique Outlet Bearingall As Specified And Directed By Engineer – In – Charge. ( Make – Zenith / Jyoti / Fire Shield ) . 65 Excavation In Trenches Not Exc 1.5 Wide And Not Exc 1.5 Mtr Deep And Getting Out In Soft Soil For Laying Pipes Complete All As Specified . 66 Returning And Filling In Soils , Includingspreading , Levelling , Wateringand Well Ramming In Layersnot Exc25 Cm Thick Completeall As Specified . 67 Removal Of Excavated Material To A Distance Not Exc 50 Mtr Away From Starting Pointand Depositing Where Directed At A Level Notexc 1.5 Mtr Above The Starting Pointcomplete All As Specifiedand Directed. 68 Material And Labourfor Cutting Of The Existing Following Type Of Road Surface And Making Good The Surface As Per Existing Finishes Complete All As Specified And Directed :- 69 Cutting Of Exsiting Pcc Road / Hard Standing / Floor, Etc. Exc. 45 Cm. And Not Exc. 90 Cm In Depth And Width 45 Cm ( Min ) For Laying Of Pipe, Tubing, Etc. And Making Good And Finished & Matching The Disturbed Surfaces With Existing Surfaces Complete All As Specified And Directed. 70 Cutting Of Exsiting Bituminous Road Exc. 45 Cm. And Not Exc. 90 Cm In Depth And Width 45 Cm ( Min ) For Laying Of Pipe, Tubing, Etc.And Making Good And Finished & Matching The Disturbed Surfaces With Existing Surfaces Complete All As Specified And Directed. 71 Material And Labourfor Taking Up Unsv Di Water Mains With Spigot And Socket Ends Of Any Class Includingall Fittings Completeall As Specifiedand Directedbyengineer -In -Chargefor 150 Mm Dia Borepipe. 72 Material And Labourfor Taking Up Unsv Di Water Mains With Spigot And Socket Ends Of Any Class Includingall Fittings Completeall As Specifiedand Directedbyengineer -In -Chargefor 100 Mm Dia Borepipe. 73 Supply And Laying Of Ductile Iron ( Di ) Pipe Spigot And Socket Ends Class K-9 Suitable For Tyton Joint Or Any Length Properly Laid In Trenches All As Specified And Directed By Engr-In-Charge Of 150 Mm Dia Bore Pipe ( Make - Electro Steel / Rashmi Metaliks / Tata Or Equivalent ) 74 Supply And Laying Of Ductile Iron ( Di ) Pipe Spigot And Socket Ends Class K-9 Suitable For Tyton Joint Or Any Length Properly Laid In Trenches All As Specified And Directed By Engr-In-Charge Of 100 Mm Dia Bore Pipe ( Make - Electro Steel / Rashmi Metaliks / Tata Or Equivalent ) 75 Supply And Fixdi Fittingfor Spigotsocketed Pipe , Bends ( Any Type , Radius And Angle ) Tapers Any Type , ( Straight , Bendincreasing , Decreasingor Doublesocketetc ) Tee Pieces Single Branch , Y Junctiondouble Branch , Cross Of Size - Up To 150 Mm Dia 76 Cleaning And Repairing Of Fire Static Tank Of Capacity 50000 Gln For Fire Fighting System By Draining Out The Water And Taking Out The Sludges From The Bottom Of The Static Water Tank And Cleaning Mossy On The Walls Of The Tank And Scrapping By Wire Brush And Brooms, Repairing The Erroded Surface Surface With Cement Plaster And Applying Two Coats Of While Lime And Writing The Date Of Cleaning On White Paint Over Black Painted Surface Complete All As Specified And Directed 77 All As Per Sl Item No 73 Here In Before But Of Capacity 30000 Gln 78 All As Per Sl Item No 73 Here In Before But Of Capacity 20000 Gln 79 All As Per Sl Item No 73 Here In Before But Of Capacity 10000 Gln 80 S&F In Repairs 25 Mm Dia Gi Pipe, Heavy Grade, With All Fittings Laid In Floors Or Fixed To Wall Complete All As Specified And Directed. 81 S&F In Repair Gun Metal Gate Valve Of25 Mm Dia 82 S&F In Repair Gun Metal Gate Valve Of50 Mm Dia 83 S&F Pressure Gauge 100 Mm Diatype 10 Kg / Sqcm. Including Taking Down Old U / S Pressure Gauge. Make-Rmco Or Equivalent As Approved. 84 S & F In Repair Led Panel Indicator Lamp Of Any Type To Match With Existing And Of Colour Red, Yellow, Blue. 22 Mm Dia Make-C&S / L&T 85 M&L For Painting To Lt Control Panels And Exposed Pipe Lines Of Steel / Iron Surfaces Of Any Description, Over 10 Cm In Width Or Girth, Not Otherwise Described After Preparation Of Old Painted Surface, With One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint As Per Colour Code And All As Directed And Approved.
Contract Date: Mar 28, 2023 Contract Value : ₹ 36.86 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 9
Odisha View Result →
TenderDetail
Loading tenders