View Bid Results For Dehydration Tenders

We found 678 Bid Results related to dehydration tenders. You can find Contractor details who won dehydration tenders along with contract details in Bid awards announcements section.

Filters
Stage
550
68
60
Tender Publishing Platform
116
562
State / UT
32
98
72
63
48
44
40
38
31
26
24
23
22
22
19
19
17
14
11
9
7
6
5
4
3
3
2
2
2
1
1
1
1
Contract Value
152
194
298
32
Publish Date
5
0
0
0
0
Sector
23
293
98
52
45
28
24
22
22
18
17
10
10
9
5
5
5
3
3
3
2
2
1
1
Ownership
5
295
199
118
60
6
Within keyword
Active filters:
Showing 1–14 of 678 tenders matching your filters
Contract Date: Ref. Documents Contract Value : 12.20 Lakh
Boards / Undertakings / PSU No of Bidders 1
Himachal Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
4.
Public Administrative Department #11331122 Technical Bid
Tender for Development Of Community Level Dehydration Centre At Dhupguri Krishak Bazar Under Jalpaiguriu Zilla Regulated Market Committee , Vegetable And Fruits Washing Machine (Bubble Washer) Suitable For Leafy And Soft Vegetables- With 0Zonedisinfection-Capacity: 100 Kg/ Hr, Power: 0.75 Kw- Stainless Steel Body, Power 1000 Watt, Semi Automatic, Operating Voltage220-240 V/50 Hz , Vegetable Shredder Machine Motor Power: 1 Hp, Capacity: 50Kg/Hr, Stainless Steel Body, Semi Automatic, Operating Voltage220-240 V /50Hz , Food Dehydrator Outer Body Of Thick Mild Steel Sheet Duly Powder Coated. Double Walled Construction With 2/1/2 Gap Filled With Best Quality Glass Wool. Inner Chamber Made Of Stainless Steel. Heating Element Are Provide At Bottom Sides. Temp. Range From + 5 Ambient To 150 C + 1 C Fitted With Microprocessor Based Pid Electronic Digital Temp. Controller Cum Indicator, Fitted With Air Circulating On 220 Volts 50 Hz Ac Mains. Rubber Feet Are Fitted At Bottom From Corners For (Smaller Sizes). Size: 600X 450X450 , Jumbo Crates Capacity 76 Ltr, Dimension Od (L X B X H) 650 X 450 X 315 Mm 450X315 Mm Blue Plastic. , Gas Oven Stainless Steel Silver S S Commercial Stainless Steel Two Knob Single Burner , Patila With Lid Aluminium Made, 20L Capacity 44.51 Cm Diametet , Ss Ladle Wooden Handle, Width 20 Inch, Height 4 Inch Weight 200G, Bowl Diameter Of 10 Cm/3.9 Inches , Stainless Steel Tray Mesh (Mesh Type 6X4) , Vacuum Sealer Semi -Automatic, Single Chamber, Sealing Time: 2-3 Sec(0-99 Sec Adjustable Option Should Be Available ). Pump Capacity: 20 M3/H. Voltage: 230V. Weight: 45 Kg. Frequency: 50/60Hz , Digital Moisture Meter , Surgical Appron , Disposable Hand Gloves (Surgical) , Disposable Hair Cap , Disposable Nose Mask , Other Internal Electrification, Plumbing And Installation Charge
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Contract Date: Ref. Documents Contract Value : 1.52 Lakh
Boards / Undertakings / PSU No of Bidders 4
Himachal Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Contract Date: Ref. Documents Contract Value : 6.37 Lakh
Government Departments No of Bidders 4
Contract Date: Jun 08, 2026 Contract Value : 30.59 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
Andhra Pradesh View Result →
13.
Civil Aviation #11209499 AOC
Bids Are invited for Operation and maintenance of Electrical and Mechanical installations - Operation and maintenance of Electrical and Mechanical installations of operational and non operational areas including Terminal buildling, ATS Building, Fire station, Electrical Substation and other ancillary buildings for round the clock operation on all days including Sundays and Holidays by engaging following manpower along with providing required tool and consumables as specified in special conditions of contract for day to day maintenance except spares. The job includes preventive, routine maintenance, attending complaint or fault or breakdown by taking rectification actionensuring serviceability and satisfactory working condition of the system, maintaining all records and documentation etc. complete as per agreement conditions and as per the instruction of EIC.1. Supervisor (Highly Skilled) - 01 no.2. Document Assistant (Highly Skilled) - 01 no.3. Wireman (Skilled) - 07 nos.4. Semi-skilled- 06 nos.5. Helper (Unskilled) - 03 nos.(The above manpower is excluding reliever) , Job contract for Operation and Day to Day Maintenance Services of Airport Systems equipments - Job contract for Operation and Day to Day Maintenance Services of Airport Systems equipments including SCCTV Camera System, FIDS , PA System, HHMD, DFMD, Security Equipments, BDDS equipments, XBIS machines, ETD Equipment etc. installed at terminal building, ancillary building at Rupsi Airport. Job also includes attending faults / breakdowns rectifications, ensuring serviceability / satisfactory working condition of the systems, providing registers and log books as per formats given in tender document and maintenance of daily/ weekly/ monthly/ quarterly/ half yearly/yearly basis, registers and log books and coordination with OEM Technicians during CMC works etc. by deploying following manpowers as per scope of work given in special conditions of contract shall be ensured round the clock (ie. in one shifts basis) on all days including Sundays & National Holidays as per direction of EIC and as per attached Annexure-A of ATC. 1. Supervisor (High skilled) -01 no. 2. Technician ( Skilled) -01 no. (The above manpower is excluding reliever) , Execution of item of Schedule of rates CPWD DSR 2022 as and when required - Execution of item of Schedule of rates CPWD DSR 2022 as and when required for attending breakdown, repair and maintenance and upkeep of internal & external electrical installations as per direction of E-I-C at different locations of operational and non operational area i/c Terminal Building, ATS Building, Fire Station, Electrical substation and other ancillary buildings etc. The bidder shall quote the rate in INR only including price escalation for 01 year for the job corresponding to an amount of Rs. 1,00,000.00 (including GST from DSR 2022 items) and percentage (%) above/below shall be calculated by AAI and paid accordingly. , Testing of Transformer oil sample including conducting BDV test and submission of test report etc complete as required - Testing of Transformer oil sample including conducting BDV test and submission of test report etc.complete as required , Filtration of Transformer oil of 630 kVA transformer - Filtration of Transformer oil of 630 kVA transformer to attain acceptable di-electric strength by hot streamline process including arrangement of plant/machine, transportation etc. complete as required by topping of Transformer oil and BDV testing including submission of test reports before & after dehydration of oil. (excluding cost of Transformer oil) (Item is to be executed if the BDV value of transformer oil is found below the stipulated value). , Servicing and Checking of LT Air Circuit Breaker - Servicing & Checking of LT Air Circuit Breaker (ACB) of L&T U POWER OMEGA make by deploying Authorised Service Personnel of Manufacturer/ OEMs Service Dealers as per OEMs standards complete as required and submission of service reports. , Servicing and Checking of HT Vacuum Circuit Breaker - Servicing & Checking of HT Vacuum Circuit Breaker (VCB) of Siemens make by deploying Authorised Service Personnel of Manufacturer/OEMs Service Dealers as per OEMs standards complete as required and submission of service reports. , Calibration and testing of relays at HT Panel - Calibration and testing of following relays at HT Panel by deploying Authorised Service Personnel of Manufacturer/OEMs Service Dealers as per OEMs standards complete as required and submission of service reports.i) Vamp 57 - 5 Nos. (Numerical type of Schneider Make)ii) VAJH13 - 5 Nos. (Tripping Relay of Alstom Make)iii) VAX31 - 5 Nos. (Trip Circuit Supervision Relay of Alstom Make)iv) VAA33 - 4 Nos. (Auxiliary Relay of Alstom Make) , Calibration and testing of following relays at LT and Synchronizing Panel - Calibration and testing of following relays at LT & Synchronizing Panel by deploying Authorised Service Personnel of Manufacturer/OEMs Service Dealers as per OEMs standards complete as required and submission of service reports.i) VAJH13 - 2 Nos. (Tripping Relay of Alstom Make)ii) VAX31 - 2 Nos. (Trip Circuit Supervision Relay of Alstom Make)iii) CCUM21PF112A - 2 Nos. (Definite Time Reverse Power Relay of Areva Make)iv) CAG14AF15A - 2 Nos. (Instantaneous Earth fault Relayof Alstom Make) , Scrubbing, cleaning the existing surface of cubicle panel, feeder pillars and painting - Scrubbing, cleaning the existing surface of cubicle panel, feeder pillars & painting the same with one coat of primer and one coat of synthetic enamel paint of approved colour etc. complete as required , Lettering of maximum 2 inch size Alphabetic or numerical - Lettering of maximum 2inc size (Alphabetic / numerical) on the finished painted surface of feeder pillar / panel / earth pits with synthetic enamel paint of approved colour etc. complete as required. , Cleaning the surface of MS chequered plates - Cleaning the surface of MS chequered plates and painting with one coat of primer and two coats of synthetic enamel black paint etc. complete as required. , Supply and replacement of silica gel in breather of existing 630 KVA transformer etc. complete as required , Lifting and lowering of 10 HP borewell submersible motor pump set - Lifting and lowering of 10 HP borewell submersible motor pump set along with dismantling of complete delivery pipeline, removal of pump sets, disconnection of flexible submersible cable, reassembling of submersible pump, complete delivery pipeline, fixing / laying of existing submersible cable including electrical connection, testing and commissioning etc. complete as required. , Servicing and complete overhauling of 10 HP borewell submersible motor pump set - Servicing and complete overhauling of 10 HP borewell submersible motor pump set including replacement of defective bearing, coupling, impellar, mechanical & oil seal, heat varnishing of motor etc. complete as required , Decoration of Terminal Building and Canopy of Rupsi Airport - Decoration of Terminal Building and Canopy of Rupsi Airport, in Tri-Colour, with the following lighting items of pattern approved by E-i-C or his authorized representative, for 03 days etc. complete as required.i) 60 nos. LED series lighting chain (minimum chain length 5m and uniform spacing between chains not more than 0.75 m)ii) 20 nos. RGB LED Facade/ Disco/ Flood light fittings (minimum 10000 lumen output) , Supply and replacement of defective smoke detectors - Supply and replacement of defective smoke detectors of suitable make & model compatible to theexisting system. , Supply and replacement of defective manual call point - Supply and replacement of defective manual call point of suitable make & model compatible to the existing system , Supply of convertor or driver suitable for PHILIPS make 20 W downlight types LED luminaires or fittings - i) PHILIPS make 20 W downlight Type DN195B LED20S , Supply of convertor or driver suitable for OSRAM make 120W types LED luminaires or fittings - ii) OSRAM make 120W Type. LEDENVO LED Street Light , Supply of convertor or driver suitable for HAVELLS make 18 or 20 W downlight types LED luminaires or fittings - iii) HAVELLS make 18/20 W downlight , Supply of convertor or driver suitable for WIPRO make 36W 2ftx2ft recess mounted fitting - iv) WIPRO make 36W 2ftx2ft recess mounted fitting , Supply of 1000W 240V Lamp suitable for Aerodrome Beacon - Supply of 1000W , 240V Lamp suitable for Aerodrome Beacon of model AB-1000F Make- Manairco Inc as and when required. , Supply of Aerodrome Beacon - Supply of Aerodrome Beacon of model AB-1000F Make- Manairco Inc as and when required. , Calibration of Clinometer - Calibration of Clinometer from Govt. Test laboratory/ OEM, submission of test report etc., complete as required i/c taking the equipment from AAIs site to laboratory and bringing back the same from laboratory to AAIs site. , Supply of reflector suitable for AMA make PAPI - Supply of reflector suitable for AMA make PAPI fittings as and when required. , Supply of 2C x 4 sq mm. Secondary lead with Plug - Supply of 2C x 4 sq mm. Secondary lead with Plug at one end of standard length of 5 m as and when required , Supply of B connector or four way porcelain terminal - Supply of B - connector / four-way porcelain terminal for AMA make PAPI units as and when required , Supply of 5 kV grade 50 Hz AC Isolating Transformer - Supply of following rating 5 kV grade, 50 Hz AC Isolating Transformer, series type, encapsuled inpolyster resin, finally moulded in neoprene type rubber with primary and secondary leads, confirming to latest specifications as required suitable for airfield lighting applications etc. as and when required. 200 Watt, 6.6/6.6 Amp. , Supply of two pin halogen lamp Holder suitable for 200 Watt - Supply of two pin halogen lamp Holder suitable for 200 Watt, 6.6 Amp Lamp as and when required. , Supply of 5 W Screw Cap LED lamp - Supply of 5 W Screw Cap LED lamp suitable for Landing T , efficacy not less than 100 lm/W as and when required. , Supply of Wind Sock Cloth - Supply of Wind Sock Cloth, 13 ft 9 inch length, colour preferably Orange & White and conforming to ICAO Annex-14 as and when required. , Supply and replacement of LED flood light - Supply and replacement of LED flood light for mounting on Wind Direction Indicator, equivalent to Philips make Model BVP132LED16/CW 20W 100-240V WB IN as and when required. , Supply and replacement of Obstruction Light of Wind Direction Indicator - Supply and replacement of Obstruction Light of Wind Direction Indicator as and when required. , Supply and replacement of 180 AH 12 V Lead Acid battery - Supply and replacement of 180 AH 12 V Lead-Acid battery, conforming to IS 14257 1995 with up to date amendments, suitable for high cranking performance of 400 kVA DG set as and when required. , Supply and replacement of 100 AH 12 V Lead Acid battery - Supply and replacement of 100 AH 12 V Lead-Acid battery, conforming to IS 14257 1995 with up to date amendments, suitable for high cranking performance of 62.5 kVA DG set as and when required , Supply of Automaic Electric Hand drier - Supply of Automaic Electric Hand drier of following specifications or equivalentMake OMCO, Model IPX1,Voltage-220-240V, Power 1800W , Servicing, Checking Repairing Overhauling and Testing of CROMPTON make 630 KVA Transformer - Servicing, Checking, Repairing, Overhauling and Testing of CROMPTON make 630 KVA, 11/0.433 KV Transformer including carrying out the following tests by deploying Authorised Service Personnel of Manufacturer/OEMs Service Dealers as per OEMs standards complete as required and submission of reports.a) General inspectionb) IR value test primary to secondary, primary to earth, secondary to earthc) Votage ratio check at all tap position,d) Buchholz relay operatione) OTI operationf) WTI operationg) On-Load Tap changer operation checkh) Cleaning of transformer and replacement of silica geli) Acidity Check test of Transformer Oil. Total Quantity : 599
Contract Date: Ref. Documents Contract Value : 92.89 Lakh
Boards / Undertakings / PSU No of Bidders 7
West Bengal View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 9
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 10
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
18.
Civil Aviation #11082890 AOC
Bids Are Invited For Custom Bid For Services - Armo Of 11Kv Sub-Station, Electrical Installation, Dg Sets And Lifts At Arsr Bijwasan, New Delhi.(2026-27). Sh:Annual Upkeep Of E&M Installations.; 1 Annual upkeeping of 11 KV Sub-station, 2 x 250 KVA DG Sets i/c AMF panel and other electrical installations at ARSR Bijwasan on all working days i/c Sunday & holidays including provision of engaging manpower as specified in the Special Conditions of Contract.Note : Contractor has to re-engage 15 nos. workmen out of total 16 nos. workmen categorized as per the special conditions of contract who are protected by the stay / Status Quo order by Honble high Court of Delhi and subject to outcome of WPC 1462/2020 and ID No-126/2020 pending with CGIT. 2 Annual Comprehensive maintenance of Water Cooler (Make:Conway Waterpurifier) floor mounted having 80 L Storage Capacity & Cooling capacity of 60 L per hour with inbuilt 7 stage RO and UV purification including replacing of filters as and when required and shifting and positioning of the water cooler & RO at the specified location (if required), inlet/outlet connections and adjustment of TDS etc. complete as required. 3 Annual Comprehensive maintenance of RO(Make : KENT),wall mounted having 8 L storage capacity & purification production rate 15 L per hour including replacing of filters as and when required and shifting and positioning of the RO at the specified location, inlet/outlet connections and adjustment of RO and its TDS etc. complete as required. 4 Annual comprehensive maintenance of 1.5 / 2 TR split type Air-conditioning unit (Make- Hitachi/Voltas) comprising of compressor, condensing coil unit, cooling coil unit etc. complete as per scope of work. 5 Execution of works as per CPWD schedule of rates and specification-2022 (DSR-2022) (E & M) for amount of Rs. 1,00,000/- as and when required during contract period. Example: if rate of an item as per DSR-2022 = 100If contractor is quoting Rs. 70,000/- againts Rs. 1,00,000 i.e. 30 % below it means Rs. 70.00 (i.e. Rate i/c GST) shall be paid for that item against Rs. 100.00 (as per DSR-2022) 6 Replacement of following Faulty Electrical items with new one complete as required at site. 6.1 3 pin Plug top 5/6 Amp, 230 V AC 6.2 3 Pin Plug top 15/16 Amp, 230 V AC 7 Replacement of faulty HRC fuse link with new one of 2 to 32 Amp rating, 80 KA breaking capacity 415 V suitable for existing panels. 8 Replacement of Silica gel for breather for 500 KVA Transformer. 9 Re-painting of L.T. panels/ feeder panels, chequered plate, electrical installations etc. with approved quality enamel paint of required colour in one or more coat with spray gun i/c scrapping & cleaning the surface complete as per site requirement and direction of E-I-C. 10 Re-painting of street light poles of height upto 8 mtr. i/c loop in loop out box with 2 coat of approved quality synthetic enamel silver paint i/c scraping, applying primer paint, foundation painting, cleaning & numbering the poles complete etc. as reqd. 11 Rewinding of following fans as per original characteristics with super enameled copper wire and insulation material, repairing the worn out bearing etc. as required i/c dismantling, making arrangment for transportation to workshop and reinstallation of the same at site, making supply connection, providing and fixing of necessary nut & bolts etc. (To be carried out as & when required). (Note: Dismantled winding shall be retained by the agency). 11.1 Exhaust fan 11.2 Ceiling fan/kit fan 11.3 Wall mounted fan 12 Repairing & Rewinding of 3-phase,415 V, 50 Hz submersible pump motors of following capacity by replacement of rewinding kit, defective bushes, impeller, seal, gasket etc. i/c transportation from site to workshop & back as and when reqd. at site.(Note: Dismantled winding shall be retained by the agency) 12.1 5 HP 12.2 1.5/1.67 HP 13 Charges for removal/ lifting of different size & capacity submersible pump set, from the existing borewell along with pipe lines, cable etc. and fixing the same after repairing. The job is to be carried out as and when reqd. at site. (Depth of borewell is approx. 75 Mtrs) 14 Testing of Dielectric strength (BDV) of Transformer oil on yearly basis for 02 nos. 500 KVA transformer & submission of report from government approved laboratory i/c collection of sample from site, transfer to lab complete as required. 15 Collection of Transformer Oil sample from Transformer 500KVA, 11 KV/433V at site and testing the same from authorised testing laboratory & submission of test report for following parameter complete as required:-(i) Acidity Test(ii) Flash Point Test(Note:- 1 Job = 1 Sample Per Transformer) 16 Dehydration & Filtration of Transformer oil with High Vaccum Filtration Machine to achieve BDV upto the level of relavent IS Dielectric strength as required i/c submission of oil test reports from government / NABL approved laboratory after dehydration of oil as & when required. 17 Supply & Toping up the transformer oil in conservator tank upto a required level with new treated transformer oil (i/c replacement of oil seal) as and when required. 18 Annual Maintenance and servicing from OEM or their authorized service dealer of 11kV HT panel (03 nos Vertical section) consisting of 1 no. of 11kV Incomer feeder, 2 nos. of 11kV O/G feeder to transformer no-01 & transformer no-02 i/c CT/PT, control wiring, ammeter, voltmer, power factor meter, Indication lamps etc. at HT panel room as per maintenance schedule /scope of work including attending complaints/breakdown whenever required and scheduled visit by deputing the manpower including the submission of servicing report, etc. excluding circuit breaker & Relays service complete as required & as per specification. (Remarks : The spares & electrical parts shall be supplied separately by the agency as and when required on payment basis). 11kV HT panel make :-Tri Square (having 03 Nos Vertical section ) (1 job = 1 complete service of above mentioned panel with service record ) 19 Annual Servicing from OEM or their authorized service dealer of VCB (3 nos.) of Rated current 800 A, Make- ABB, Type- VD4/W i2.08.20,11kV Rated voltage along with testing and calibration of all 11KV HT panels protection associated relays, including attending the complaints whenever required and carrying out atleast 01 visit per year along with submission of VCB servicing & testing i/c relay calibration report.(1 job = 1 Complete service consist of all 3 Nos VCB Service & testing i/c associated relays calibration report). 20 Annual Maintenance and servicing from OEM or their authorized service dealer of following LT panels:- 1.Non Essential LT panel - 1 No.(08 Nos. Vertical sections )2.Essential LT panel -1 No.(06 Nos. Vertical sections) , 3.200 KVAR capacitor bank APFC Panel -1 No. (03 Nos. Vertical sections ) i/c control wiring, MCCB service & maintenance, microprocesser based relays etc. as per maintenance schedule /scope of work including attending complaints/breakdown whenever required and scheduled visit by deputing the manpower including the submission of service report, etc. excluding Air circuit breaker(ACB) service complete as required & as per specification of above mentioned panels (Remarks : The spares & electrical parts shall be supplied separately by the agency as and when required on payment basis). Panel Make - EAP Electro Projects. (1 job = 1 complete service of above mentioned panels (03 nos) with service reports) . 21 Complete servicing of Air Circuit Breaker(ACB) of rating 800 Amp. installed in LT panels by authorised service dealer of OEM M/s Lauritz Knudsen (LK) including submission of service reports in triplicate etc as reqd.
Contract Date: Ref. Documents Contract Value : 63.60 Lakh
Boards / Undertakings / PSU No of Bidders 4
Contract Date: May 22, 2026 Contract Value : 4.40 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
Contract Date: Ref. Documents Contract Value : 5.23 Lakh
Boards / Undertakings / PSU No of Bidders 3
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Jammu and Kashmir View Result →
25.
Defence #10898109 AOC
Tender For Repair Replacement And Servicing Ht Equipments Including Replacement Of Old Ht Cables And Its Connected Works At Aundh Military Station Under Ge Mh And Rh Khadki; 1 Disconnecting the HV(22KV) & LV(0.415kV) side electrical connections including neutral earth strip of existing step down transformer, drain out the complete oil of transformer and store carefully in clean container. Cleaning of all HV/LV windings terminals, cleaning of conservator tank, cooling fins/tubes, tank, etc. Thuroughly inspecting of core and winding complete, reinsert the core coil assembly into the transformer tank, replacing 5/3 mm thick rubberised corksheet gasket of top cover complete and refilled with filtered transformer oil upto the desired level marked in conservator tank and record the insulation resistance of the winding both HV/LV side between earth and HV/LV winding, reconnecting the HV/LV side electric cables complete of following capacity of stepdown transformer all as specified and directed.Note - Transformer oil filtration and top up shall be measured and paid seperately under the relevant item of schedule 2 Transformer capacity 100KVA to 250 KVA 3 Transformer capacity 300KVA to 500 KVA 4 M&L for dehydration of transformer oil with mobile stream line transformer oil filteration plant at site with all accessories connected to transformer and carrying out filterartion of oil to desired dielectric strenghtto achieve electric strength of 60 KV for 1 minute at 2.5 mm gap as per relevant IS fortransformer installed at various locations out door/in door type all as specified and directed by the Engineer in Charge Note : Test certificate shall be submitted for before and after filteration for dielectric strenght on the proper format. (ii) Transformer oil used for top up will be measured and paid seprately under relevant item. 5 Supply and topping up new transformer oil confirming to IS -335 of 1993 into the conservator tank/body tank of the transformer at various location all as specified and directed. Make : Power Oil or its equivalent. Note : The transformer oil for topping up shall be with di-electric strength of 40KV 6 Disconnecting all in coming and outdoor cables removing the transformer from the platform/two pole structure and floor and loading it in the vechicle carefully using the crane and transporting it to the workshop for repairs and transformer transport back to site, reinstall it, reconnecting all incoming and outgoing cable by properly crimping using lugs of suitable size taping the bushes/busbar, using insulation tape and testing of capacity 200 KVA to 500 KVA all as specified and directedNote :LT/HT side ceramic busing, brass spindle for HT/LT side, Rewinding, Dehydration of oil shall be measured and paid seprately in respective Items 7 M&L for rewinding of HT /LT windings oftransformer, winding the defective coils with approved quality copper wire as per IS of same gauge and existing size together with new insulation materials, bracings the terminals before placing into the tranformer and assembling the HT / LT coil with new insulation between core and LT coil all as required and fitting the coils in the chamber, testing and commisioning the transformer after providing necessary connections all as specified and directed 8 M&L for arrest the leakage of transformer oil from the LT/HT side bushings by replacing oil seals, Gaskets of, top cover, conservator tank and other parts of transformer afterdrain out the transformer at required level, tigtning the transformer nut bolts, replacing the gasket nuts, bolts, washer and refilling thestrored Transformer oilafter completion of oil arrest all as specifeid and directed.Note : (i) Spares requiredsuch as nut, bolts, washer, Gasket etc required to oil arrest shallbe deemed in quoted rate.(ii) Topping up of extra transforemer oil required to achieve desired level measured and paid seprately. (iii) HT/LT side complete bushing assemble with brass stud & oil seal shall be measured & paid under relevent items of schedule. 9 Supply only HT side bushing 22KV with oil sealfor 100 to 250 KVA 10 Supply only HT side bushing 22KV with oil seal for 300 to 500 KVA 11 Supply only LT side bushing 415Vwith oil sealfor 100 to 250KVA 12 Supply only LT side bushing 415V with oil sealfor 300 to 500 KVA 13 Replacement of breather assembly complete with silica jel in transparent container with metallic top and bottom cup with pipe entry of 15/20 mm dia, including oil bath tub all as specified and directed 14 Replacement of existing unserviceable silica gel with new crystal clear silica jel for breather of transformer all as specified and directed 15 Supply only brass spindle on LT side as per existing size, shape and specification for capacity range 100 KVA to 500 KVA all as specified and directed 16 Supply only brass spindle on HTside 22 KVas per existing size, shape and specification for capacity range 100 KVA to 500 KVA all as specified and directed 17 M&L for overhauling servicing of Tap changer and replacement of unserviceable parts as ordered with new and assembling with old serviceable parts for smooth functioning and operation all specified and directed. 18 M&L for transformerpainting with twocoat of synthetic enamel paint heat proof of same colour including preparation of old surfaces complete includuing writing the MES no in bold letter all as specified and directed. 19 M&L for painting to two pole structure with twocoats of aluminumpaintoverred oxide paint after preparation of old surfaces as per existing all as specified and directed. 20 M&L for painting to four pole structure with two coats of aluminum paint over red oxide paint after preparation of old surfaces as per existing all as specified and directed. 21 M&L for spray painting to exposed surface of steel tubular pole HT pole 11 metre long with two coats of synthetic enamel aluminium paint (as per existing colour) over a coat of red oxide primer including preparation of old painted surface by scrapping or complete removal of old paint, filling cavities with filler all as specified and directed 22 S&F in replacement of tubular aluminium alloy bus bar 12 mm thichness of 32 mm outer dia and 20 mm inner dia with colour code of Red, yellow & blue coupled with Al Clamps 120 mm Length 6 mm thickness mounted on polymer based 22 KV type insulators suitable for HT 22 KV two/four pole structures in horizontal layers duly coupled with strip jumbers, Lightning arrestors all as specified and directed 23 S&F in replacement of solid aluminium strip of 30 mm x 10 mm with colour code suitable for HT 22 KV two/four pole structures in verticle layers fixed in polyglass/epoxy & cycloaliphatic insulators duly coupled with horizantal bus bars, Lightning arrestors, drop out fuse assembly, Gang operated device all as specified and directed 24 S&F for Insulator Pin/ post type polymer based including one galvanishing MS spindle, nuts & washers for 22 KV grade and fixing to the structure all as specified and directed 25 S&F in repairs switch air break gang operated HT 22 KV Volt grade out door type, triple pole of capacity 200 amps rating mounted on Polymer based 9 insulator and fitted on steel frame horizontally mechanically operated mechanism from ground level consisting of operating rod of 25 mm bore Heavy grade GI pipe of suitable length worked from ground level and with locking arrangements including pad locks with key flat iron clamp 50 mm x 6 mm including taking down old unseviceable one all as specified and directed. Make: Pactil /Jaipuria Brothers / MEC Trivandrum 26 Supplying, installing, fixing, connecting and testing of polymer based Drop-out fuse set (set of 3 nos), mounted on insulators with steel frame 200 Amps capacity, siutable for 22KV, HT system, out door type, including Expulsion fuse carriers and fuse element Upto 25 Amp, including taking down old unserviceable one all as specified and directed 27 M&L in repais Lightning arrester high tension expulsion type complete with all fittings transmission class, discharge capacity 30 Kilo amps suitable for 22000 Volts supply including taking down old lightning arresters all as specified and directed 28 M&L for detect HT 22 KV cable faultfor various size of cable ofwith technician round the clock on Md Accn and OTM accn at Aundh Mil Stn areas detect the cable fault and necessary excavation of soil and refilling the soil, joint the faulty cable with new straight through joint kit, after jointing, testing, and charging of HT / LT cable all as specified and directed by Engr-in-Charge. Note: (i) Cable joint required size measured and paid separately (ii) Each job considered cable fault locator use in one day 29 M&L in repairs for errecting steel tubular swaged poles in true vertical position ( or to be fixed in an inclined positon as strut pole) steel tubular swaged poles complete with MS base plate of 6 mm thick of size 450x450 mm finial taper plug, pole cap, bolts, nuts and washer and screwd pole madeout of ERW MS tubing confirming to IS -2713 (part-II) 1980 type 410 SP-55 (11 meters long) pole including drilling of holes of required size and Nos for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embeded in concrete.(For 2 pole Structure) all as specified and directed 30 Disconnecting ACSR conductor any type and supply and fixing ACSR conductor of any size/ type for OH line on poles insulator for jumpering connection including binding insulators with alluminium wire all as specified and directed 31 M&L for Cradles, hexagonal/rectangular, fabricated with galvanised steel wire 4 mm dia all as specified and directed. 32 M&L in repairs for cross arms, bracing, supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washer, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat and one finishing coat of coat of paint all as specified and directed by Engr in charge 33 S&F in repairs Danger notice platefor HTof size 25 cm x 20 cm of 1.6mm thick mild steel sheet, veterious enamelled white with letter, fighers and conventional skull and bones with signal red colour and fixed with MS clamps, bolts and nuts all as specified and directed. 34 M&L PCC 1:4:8type D2 (using 40 mm graded crushed stone aggregate) for PCC pole/struts, stay assembly,foundation filling and mass concrete all as specified and directed. 35 M&L PCC 1:3:6type C1, (using 20 mm graded crushed stone aggregate) as in coping of pole all as specified and directed. 36 Excavation in trenches n.exc 1.50 m wide and not exc 1.5 m depth and getting out in soft / loose soil all as specified and directed. 37 Excavation in trenches n.exc 1.50 m wide and not exc 1.5 m depth and getting out in hard / dense soil all as specified and directed. 38 Excavation in trenches n.exc 1.50 m wide andexc 1.5 m depth and getting out in soft disintegratedsoil all as specified and directed. 39 Returing, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm in soil all as specified and directed. 40 Removing excavated materials not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed. 41 M&L for riddled earth for cushioning to under ground cable in trenchesincluding spreading, levelling handpunning and consolidateall as specified and directed. Note : For the purpose of payment only punned thickness will be measured. 42 Supplying and laying reinforcedpre cast concrete cable cover, class EHV, type-1, with peak size450mmx230mmx50mm laid in trench as protection to cable all as specified and directed 43 Taking down burnt bricks / PCC covers of any size and relaying the same after laying of cable all as directed and specified. 44 M&L for road cutting for laying GI pipe for protection of cable upto depth 90 cm including making goodthe disturbedroad and redressing the disturbed surfaces of road with filling concrete type D-2 PCC 1:4:8 (using 40 mm graded crushed stone aggregate) all as specified and directed. (For HT/LT cable) 45 S&F in repairs GI pipe size 100 mm bore, Light grade(ISI marked) laid in trenches/ path /road crossings/ fixed to poles/ceiling/ along walls/ path /drain/floors with and including all necessary clamps, nuts, bolts, washers etc and all fittings as required all as specified and directed. 46 Supply and laying HT underground cable 95 sqmm x 3 core XLPE insulated, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with sranded aluminium conductor 22000 volts grade including dismantling of old HT cables laid in trenches/passing through pipes or fixed on poles/wall/floor all as specified and directed. 47 All as per item No 40above but of Size 120 sqmm x 3 core 48 All as per item No 40above but of Size 185 sqmm x 3 core 49 All as per item No 40above but of Size 300 sqmm x 3 core 50 M&Lin repairs cable jointing kit of Size 95 sqmm x 3 core, 22 KV (Earthed) grade of cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable all as specified and directed by Engr-in-charge. 51 All as per item No 44above but ofSize 120 sqmm x 3 core to 185 Sqmm x 3 Core 52 All as per item No 44above but ofSize 240 Sqmm 3 Core to 300 sqmm x 3 core 53 M&L in repairs cable jointing kit Size 95 sqmm x 3 core for 22 KV(Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable all as specified and directed. 54 All as per item No 47above but of Size 120 sqmm x 3 core to 185 Sqmm x 3 Core 55 All as per item No 47above but ofSize 240 Sqmm 3 Core to 300 sqmm x 3 core 56 M&L forheat shrinkable HT 22 KV (earthed) straight through joint Size 95 sqmm x 3 core cable kit suitable for aluminium conductor cable all as specified and directed 57 All as per item No 50above but ofSize 120 sqmm x 3 core to 185 Sqmm x 3 Core 58 All as per item No 50above but ofSize 240 Sqmm 3 Core to 300 sqmm x 3 core 59 M&L for triming of tree branches with in 2.0 mtr on either side of the electric line/ poles with suitable T & P and depositing the waste all as specified and directed. 60 M&L for cable route indicator made out of Cast ironof dia 100 mm embrosed with HT cablewith 25mm x 5 mm GI flat of lenth 1 metreincluding painting with two coats of synthetic enamel red colour paint over a coat of primer to exposed surfaces all as specified and directed by the Engineer-in-charge. 61 Maintenance, Serviceing and calibration of 22 KV HT POVCBcomprises of the following:-(a) Checking the 22 KV HT POVCB/(SF 6 type) of 1600 Amps ratingHT panel after switching off electric supply checking of mechanical system for proper functioning of upward/downward movement of HT POVCB including servicing the CR Panel& checking the mechanical system. Cleaning & servicing the fixed/moving contact & blowing out dust and applying the proper lubrication/greasing theincluding replacing the control cables as required for connection to CR panel (b) Taking out relay set ( 2 Nos over current & 01 No earth fault relay) of any make from HT 22 KV CR panel and cleaning the contact(NO+NC) by CTC solution and adjust the contact and calibrate the relay by relay testing kit & proper plug setting as per reqd load & time delay and fixing the relay set in HT panels complete all as specified and directed. Note for (a) & (b):- (i) Testing of above job to be carried out by engineers of authorised dealer/service centre of concerned OBC. (ii) Replacing new items shall be measured and paid separately as supply only. (iii) Contractor shall submit the connected document/graph for relay calibration duly authenticated by authorised dealer/service center. 62 S&F Over current /earth fault protection Relay suitable for HT CR Panel ofcapacity24 V to 240 V AC/DC, 22KV, 3 ph, 50 Hz all as specified and directed by Engineer in Charge. Make- ASHIDA/CROMPTON / L & T/ SPHNEIDER 63 S&FVacuum interrupter bottle suitable for HT POVCB ofCapacity 1250 AMP, 22KV, 3 ph, 50 Hz Panel, all as specified and directed.Make- CROMPTON /ABB and equivallent 64 S&F Spring ChargeMotor suitable for HT POVCB of240V AC, 22KV, 3 ph,50 Hzall as specified and directed Make- CROMPTON/ ABB and Equilent 65 S&F Triping /Closing coilfor POVCB of 24V DC, 22KV, 3PH, 50Hz all as specified and directed.Make- CROMPTON 66 S&F TNC Switch ON/OFF suitable for 22 KV CR panel suitable for HT POVCB ofcapacity 16AMP 4P, 22KV, 3 ph,50 Hz Panel all as specified and directed.Make- CROMPTON/ AREVA 67 M&L for Servicing 22 KV HT RMU (Ring Main Unit), type - RM6, of capacity 630A/800A, 22KV, 3 ph, 50 Hz Panel, comprising the following works. Make-C&S (a) check the auxilliry switch, shunt trip assembly, closing/Trip solenoid, limit switch and complete control wiring all as specified and directed 68 Over hauling and testing of secondary injection of over current and earth fault relay of HT RMU 22 KV panel on each multiple setting, readjustment and calibration the same complete, checking of control wiring including testing on completion all as specified and directed. 69 Supplyonly of the following material for VCBs/RMU all as specified and as directed. 70 Charging motor, single phase working on 240 volts Ac 71 Closing/tripping coil operated on 110 /30 volt system 72 Tripping coil operated on 110 /30 volt system 73 loading Spring 74 latch switch assly 75 Space heater 76 Thermostat for Space heater 77 Refilling onsite SF6 Gas, required for 22 KV VCBs/RMUs 78 M&L for cleaning of MES electric supply installations/campus by surface dressing or trimming of natural ground to remove small unequalities (including removing vegetation/ shrubs/brush wood/under growth) and carrying away the rubbish to a distance of not exc 50 mtr away for the various sub stations including spray of herbsite all as specified and directed. 79 M&L forhardcore of gauge n.exc 63mm, deposited, spread, and levelled in layers n.exc15 cm thickness (below or above ground level), water and rammed to a true shape with broken stone or boulders existing available on site and making good all as specified and directed.( Sub Station Yard) 80 M&L of Synthetic insulating mat confirming to IS 15652:2006 of size 2mx1m x3mm thick for voltage up to 22/33 kv all as specified and directed by Engr in charge.
Contract Date: Apr 28, 2026 Contract Value : 19.12 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Maharashtra View Result →
Contract Date: Jun 06, 2026 Contract Value : 34.80 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 5
35.
Power #10779961 Price Bid
Tender For Replacement Of 60 Mva Transformer-Ii Ct Plate With Gasket At 220 Kv Sub-Station Harahua Under Electricity Transmission Division-I, Varanasi - Drainin gof 60 MVA Transformer -II oil into 20 KLoil tankup to required level at 220 KV S/S Harahua, Varanasi. 2 Opening of 60 MVA Transformer -II CT plate. 3 Replacement of 60 MVA Transformer -II CT plate with replacement of suitable gasket and proper tightening the plate. 4 Filling of drained Transformer oil from 20 KL oil tank to main tank for centrifuging of Transformer oil (centrifuging machine to be provided by the contractor). 5 Centrifuging/Dehydration of the complete Transformer oil of 60 MVA Transformer by ultra– high vacuum filtration plant including taking the BDVs value of oil of the Transformer periodically till the required value is achieved with all cost of centrifuging machine and centrifuging machine Operator. 6 Spray painting rusted of 60 MVA Transformer -II at 220 kv substatin Harhua .Work includes painting of one coat of good quality red oxide primer and two coats of light grey synthetic enamel paint of first class quality having Asian/Barger/Nerolac make after proper cleaning of rust/dust and oily surface by emery/sand paper including cost ofall materials labour and T&P and associated arrangements. 7 Complete overhauling of 33KV Vacuum Circuit Breakers installed at 220KV S/S Harahua. Job Includes alignment of mechanism assembly by opening and adjusting its operating rod, holding latch and damping spring etc. Replacement of damaged washers, lock pins, small springs etc as per requirement during the work. Assembling the mechanism followed by oiling, greasing and tightening of all nuts & bolts of the mechanism box, checking & tightening of all AC/DC connections/terminals, proper checking the spring charging motor along with replacement of its carbon, removing the deposited dust/carbon on terminals by good quality CRC spray, checking the proper tripping & closing of VCB from local and remote including other associated works also if required for satisfactory completion of job. All labour, T&P and consumable items will be provided by contractor at his own cost.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Andhra Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
44.
Housing Urban and Rular Development #10626657 Price Bid
Operational And Maintenance Work Of Electrical Infra At Iie Haridwar Street Light Generator Transformer Servo Pump House Etc , Street Light Maintenance , Pump House Maintenace With Amc For Electrical Items , Lifting Vehical / Hydra Required For Overhead Street Lights Maintenance Purpose ( On Hire Basis ) ( 05Days / Month ) ( As Per The Requirement ) , Repair Of 60Watt Led Street Lights By Replacement Of Damaged / Diffused Drivers 60Watt Make-C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour Charges . Dlp 6 Month . , Repair Of 60Watt Led Street Lights By Replacement Of Damaged / Diffused Pcb Plates 60Watt Make-C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour Charges . Dlp 6 Month . , Repair Of 150Watt Led High Mast Lights By Replacement Of Damaged / Diffused Drivers 150Watt Make -C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour . Dlp 6 Month . , Repair Of Led High Mast Lights Replacing Damaged / Diffused Pcb Plates 150 Watt Make -C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour . Dlp 6 Month . , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing 3Pole Power Contactor Type Mnx-70 Cat Pt No . Cs97076 Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing Timer Auto Light , Cat Pt . No . Ta916422 Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing 3Pole Mccb , 100Amp Type Dno100c Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing Isolator 4Way 40 Amps Including Material Charges But Excluding Labour . Six In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Replacing The Burnt / Damage Pvc 1 . 5 Sqmm Single Core Wire By Required Size Of Weather Proof Cable Excluding Labour . ( As Per The Requirement ) , Supply Of Pvc Xlpe Power Cable 1 . 1 Kv Grade 4X 35 Sqmm Excluding Labour ( As Per The Requirement ) , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable 1 . 1 Kv Grade Of Size Up To 35 Sqmm Direct In Ground Including Excavation , Sand Cushioning , Protective Covering And Refilling The Trench Etc As Required . ( Dsr No . 7 . 1 . 1 ) , Supply Of Aerial Bunch Cable 4X35 Sqmm ( As Per The Site Requirement ) Including Material For Laying Of The Cables On Poles Excluding Labour Charges . ( As Per The Requirement Raised By Engineer-In Charge ) , Erection Of Metallic Pole 8Mtr To 11 Mtr ( 10Mtrs ) Height , In Cement Concrete 1:3:6 Foundation Including Excavation And Refilling Etc Including Labour And Material . ( Dsr 11 . 3 . 3 ) ( As Per The Requirement Raised By Engineer-In Charge ) , Pole Painting ( Inclduing Surface Cleaning And Primer Coat ) With Numbering On Poles ( As Per The Site Requirement ) Including Material And Labour Charges , Wages / Labour Charges For Electricians To Be Depute At Respective Industrial Estates Of Siidcul For O&M Work ( For 8Months ) , Wages / Labour Charges For Helpers To Be Depute At Respective Industrial Estates Of Siidcul For O&M Work , Annual Maintenance Of Transformer Installed For Main Supply Of Street Lights Inclduing Dehydration Of Transformer Oil , Oti / Wti Calibration Etc . ( Once In Year ) , Annual Maintenance Of Dg Sets Installed At Siidcul Offices Or For Street Lights Back Up Energy Inclduing Material And Labour . ( 02 Services Per Year ) , Annual Maintenance Of Servo / Apfc Panel / Breaker Installed At Siidcul Offices Or For Street Lights Back Up Energy Inclduing Material And Labourand Labour . ( Once In Year ) , Annual Maintenance / Servicing Of Air Conditioners ( Ductable / Window / Split ) Installed At Siidcul Offices Including Labour And Material By Repair Of 2Nos Of Pcb Card On Each Of 2 . 5T & 5 . 5 / 8 . 5T ( Total 02Nos ) , By Replacement Of Compressor One Each Of 2 . 5T & 5 . 5T And 8 . 5T ( Total 3Nos ) , Repair Of Total 03Nos Of Fan Motor One Each Of 2 . 5T & 5 . 5T And 8 . 5T ( Total 3Nos ) With R-22 Gas Refill ( Total Ac Capacity Is 78 . 8 Tr ) , Comprehensive Annual Maintenance Of 20Kva Ups ( Eaton Make ) Installed At Siidcul Offices Including Labour And Material . ( Including Replacement Of 12V , 18Ah Total 28Nos Battery With Buy Back , Card Reapair Etc . ) , Repairing And Rewinding Of 25Hp Submersibile Tubewell Motor Complete In All Respect Including Lowering And Lifting , Labour & Material ( As Per Requirement ) , Repairing Of 25Hp , 8Stage Submersibile Pump By Repair / Replacement Of Pump-Bush , Sleeves , Necking Etc . Complete In All Respect Inclduing Labour & Material . ( As Per Requirement ) , Repairing Of Submericible Motor Electrical Control Panel Replacing 3Pole Power Contactor Type Mnx-70 Cat Pt No . Cs97076 Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Submericible Motor Electrical Control Panel Replacing Timer Auto Light , Cat Pt . No . Ta916422 Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Submericible Motor Electrical Control Panel Replacing 3Pole Mccb , 100Amp Type Dno100c Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Submericible Motor Electrical Control Panel Replacing Isolator 4Way 40 Amps Including Material Charges But Excluding Labour . Six In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Replacement Of Electric Cable For Power Supply To Submersibile Motor Pump Complete In All Respect Including Material & Labour Charges . ( Size 3X6mm2 ) ( As Per Requirement ) , Rewinding & Repairing Of Water Supply 40Hp Motor With Taking Out And Fixing In Position Complete In All Respect Inclduing Material And Labour Charges . , Repairing Of Water Supply Motor Electrical Control Panel Replacing 3Pole Power Contactor Type Mnx-70 Cat Pt No . Cs97076 Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Water Supply Motor Electrical Control Panel Replacing Timer Auto Light , Cat Pt . No . Ta916422 Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Water Supply Motor Electrical Control Panel Replacing 3Pole Mccb , 100Amp Type Dno100c Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Water Supply Motor Electrical Control Panel Replacing Isolator 4Way 40 Amps Including Material Charges But Excluding Labour . Six In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Replacement Of Electric Cable For Power Supply To Submersibile Motor Pump Complete In All Respect Including Material & Labour Charges . ( Size 3X6mm2 ) ( As Per Requirement )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 6
Uttarakhand View Result →
45.
Housing Urban and Rular Development #10626651 Price Bid
Operational And Maintenance Work Of Electrical Infrastruture Iie Pantnagar Street Light Maintenance Transformer Generator Ac Pump House , Street Light Maintenance , Pump House Maintenace With Amc For Electrical Items , Lifting Vehical / Hydra Required For Overhead Street Lights Maintenance Purpose ( On Hire Basis ) ( 05Days / Month ) ( As Per The Requirement ) , Repair Of 60Watt Led Street Lights By Replacement Of Damaged / Diffused Drivers 60Watt Make-C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour Charges . Dlp 6 Months . , Repair Of 60Watt Led Street Lights By Replacement Of Damaged / Diffused Pcb Plates 60Watt Make-C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour Charges . Dlp 6 Months . , Repair Of 150Watt Led High Mast Lights By Replacement Of Damaged / Diffused Drivers 150Watt Make -C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour . Dlp 6 Months . , Repair Of 150Watt Led High Mast Lights Replacing Damaged / Diffused Pcb Plates 150 Watt Make -C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour . Dlp 6 Months . , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing 3Pole Power Contactor Type Mnx-70 Cat Pt No . Cs97076 Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing Timer Auto Light , Cat Pt . No . Ta916422 Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing 3Pole Mccb , 100Amp Type Dno100c Including Material Charges But Excluding Labour . One In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing Isolator 4Way 40 Amps Including Material Charges But Excluding Labour . Six In Each , Total 03 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Replacing The Burnt / Damage Pvc 1 . 5 Sqmm Single Core Wire By Required Size Of Weather Proof Cable Excluding Labour . ( As Per The Requirement ) , Supply Of Pvc Xlpe Power Cable 1 . 1 Kv Grade 4X 35 Sqmm Excluding Labour , Supply Of Aerial Bunch Cable 4X35 Sqmm ( As Per The Site Requirement ) Including Material For Laying Of The Cables On Poles Excluding Labour Charges . , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable 1 . 1 Kv Grade Of Size Up To 35 Sqmm Direct In Ground Including Excavation , Sand Cushioning , Protective Covering And Refilling The Trench Etc As Required . ( Dsr No . 7 . 1 . 1 ) , Pole Painting ( Inclduing Surface Cleaning And Primer Coat ) With Numbering On Poles ( As Per The Site Requirement ) Including Material And Labour Charges , Erection Of Metallic Pole 8Mtr To 11 Mtr ( 10Mtrs ) Height , In Cement Concrete 1:3:6 Foundation Including Excavation And Refilling Etc Including Labour And Material . ( Dsr 11 . 3 . 3 ) , Supply And Fixing Of Pre-Fab Water Proof Street Light Pole Boxes ( Powder Coated Chocolate Colour ) Size 300Mm X 00Mm X150mm Mada Of Crca Sheet Of Thickness 1 . 6Mm With Arrangement / Connection Of 3Phase Incoming And Outgoing Supply And 01 Nos 06Amp B-Curve Mcb Complete In All Respect , Wages / Labour Charges For Electricians To Be Depute At Respective Industrial Estates Of Siidcul For O&M Work ( For 8Months ) , Wages / Labour Charges For Helpers To Be Depute At Respective Industrial Estates Of Siidcul For O&M Work , Annual Maintenance Of Transformer Installed For Main Supply Of Street Lights Inclduing Dehydration Of Transformer Oil , Oti / Wti Calibration Etc . ( Once In Year ) , Annual Maintenance Of 15Kva , Dg Sets Installed At Siidcul Offices Inclduing Material And Labour With Replacemnet Of 1No 100Ah Battery . ( 02 Services Per Year ) , Annual Maintenance / Servicing Of Air Conditioners ( Ductable / Window / Split ) Installed At Siidcul Office Including Labour And Material With Repair Of O1 No Of Pcb And Repair Of 01 No Of Fan Motor Of Outdoor Unit , And Replacement Of 01 No Capacitor With R-22 Gas Refill ( , Inclduing Service ( For Total 12Nos ) ( Capacity 1 . 5Tr Each )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Uttarakhand View Result →
46.
Housing Urban and Rular Development #10626645 Price Bid
Operational And Maintenance Work Of Electrical Infrastructure It Park Street Light Maintenance Pump House Etc , Street Light Maintenance And Pump House Maintenace , Lifting Vehical / Hydra Required For Overhead Street Lights Maintenance Purpose ( On Hire Basis ) ( 02Days / Month ) ( As Per The Requirement ) , Repair Of 60Watt Led Street Lights By Replacement Of Damaged / Diffused Drivers 60Watt Make-C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour Charges . Dlp 6 Months , Repair Of 60Watt Led Street Lights By Replacement Of Damaged / Diffused Pcb Plates 60Watt Make-C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour Charges . Dlp 6 Months , Repair Of 150Watt Led High Mast Lights By Replacement Of Damaged / Diffused Drivers 150Watt Make -C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour . Dlp 6 Months , Repair Of Led High Mast Lights Replacing Damaged / Diffused Pcb Plates 150 Watt Make -C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour . Dlp 6 Months , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing 01No 3Pole Power Contactor 100Amp Including Material Charges But Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing Timer Auto Light , Including Material Charges But Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing 3Pole Mccb , 100Amp Including Material Charges But Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing Isolator 02Way 40 Amps Including Material Charges But Excluding Labour . Total 02 No ( As Per The Requirement Raised By Engineer-In Charge ) , Replacing The Burnt / Damage Pvc 1 . 5 Sqmm Single Core Copper Wire By Required Size Of Frls Cable Excluding Labour . ( As Per The Requirement ) ( Dsr 2018-1101 ) , Supply Of Pvc Xlpe Power ( Armoured ) Cable 1 . 1 Kv Grade 4X 16 Sqmm Excluding Labour ( As Per The Requirement ) , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable 1 . 1 Kv Grade Of Size Up To 35 Sqmm Direct In Ground Including Excavation , Sand Cushioning , Protective Covering And Refilling The Trench Etc As Required . ( Dsr No . 7 . 1 . 1 ) , Erection Of Metallic Pole 8Mtr To 11 Mtr ( 10Mtrs ) Height , In Cement Concrete 1:3:6 Foundation Including Excavation And Refilling Etc Including Labour And Material . ( Dsr 11 . 4 ) ( As Per The Requirement Raised By Engineer-In Charge ) , Wages / Labour Charges For Electricians To Be Depute At Respective Industrial Estates Of Siidcul For O&M Work ( For 8Months ) , Wages / Labour Charges For Helpers To Be Depute At Respective Industrial Estates Of Siidcul For O&M Work , Annual Maintenance Of Transformer Installed For Main Supply Of Street Lights Inclduing Dehydration Of Transformer Oil , Oti / Wti Calibration Etc . ( Once In Year ) , Repairing And Rewinding Of 35Hp Submersibile Tubewell Motor Complete In All Respect Including Lowering And Lifting , Labour & Material ( As Per Requirement ) , Repairing Of 35Hp , 10Stage Submersibile Pump By Repair / Replacement Of Pump-Bush , Sleeves , Necking Etc . Complete In All Respect Inclduing Labour & Material . ( As Per Requirement ) , Repairing Of Submericible Motor Electrical Control Panel Replacing 01No 3Pole Power Contactor Type Ml-04 Including Material Charges But Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Submericible Motor Electrical Control Panel Replacing 200Amp Kitkat Switch Including Material Charges But Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Submericible Motor Electrical Control Panel Replacing Sfu Tpn 200Amp Including Material Charges But Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge ) , Replacement Of Electric Cable For Power Supply To Submersibile Motor Pump Complete In All Respect Including Material & Labour Charges . ( Size 3X6mm2 ) ( As Per Requirement ) , Rewinding & Repairing Of Water Supply 15Hp Motor With Taking Out And Fixing In Position Complete In All Respect Inclduing Material And Labour Charges . , Repairing Of Water Supply Motor Electrical Control Panel Replacing 200Amp Kitkat Switch Including Material Charges But Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Water Supply Motor Electrical Control Panel Replacing Sfu Tpn 200Amp Including Material Charges But Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
Uttarakhand View Result →
47.
Housing Urban and Rular Development #10626638 Price Bid
Annual Operation & Maintenance Of Electrical Infrastructure Of Street Lights And Water Supply At Iie-Selaqui , Street Light Maintenance , Pump House Maintenance With Amc Of Electrical Items , Lifting Vehical / Hydra Required For Overhead Street Lights Maintenance Purpose ( On Hire Basis ) ( 02Days / Month ) , Repair Of 60Watt Led Street Lights By Replacement Of Damaged / Diffused Drivers 60Watt Make-C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour Charges , For Pharma City Selaqui . Dlp 6 Months , Repair Of 60Watt Led Street Lights By Replacement Of Damaged / Diffused Pcb Plates 60Watt Make-C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour Charges For Pharma City , Selaqui . Dlp 6 Months . , Repair Of 90Watt Led Street Lights By Replacement Of Damaged / Diffused Drivers 90Watt Make-C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour Charges For Sidc Selaqui . Dlp 6 Months . , Repair Of 90Watt Led Street Lights By Replacement Of Damaged / Diffused Pcb Plates 90Watt Make-C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour Charges . Dlp 6 Months . , Repair Of 150Watt Led High Mast Lights By Replacement Of Damaged / Diffused Drivers 150Watt Make -C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour . Dlp 6 Months , Repair Of Led High Mast Lights Replacing Damaged / Diffused Pcb Plates 150Watt Make -C&S . , Phillips , Havells , Bajaj ( As Per The Site Requirement ) Including Material Charges But Excluding Labour . Dlp 6 Months . , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing 3Pole Power Contactor 100Amp Including Material Charges But Excluding Labour . One In Each , Total 02 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing Timer Auto Light , Including Material Charges But Excluding Labour . One In Each , Total 02 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing 3Pole Mccb , 100Amp Including Material Charges But Excluding Labour . One In Each , Total 02 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Street Lights / High Mast Electrical Control Panel Replacing Isolator 02 Way 40 Amps Including Material Charges But Excluding Labour . 02 In Each , Total 02 Panels ( As Per The Requirement Raised By Engineer-In Charge ) , Replacing The Burnt / Damage Pvc 1 . 5 Sqmm Single Core Wire By Required Size Of Frls Copper Cable Excluding Labour . , Supply Of Pvc Xlpe Power Cable 1 . 1 Kv Grade Armoured Size 4X 16 Sqmm Excluding Labour , Laying Of One Number Pvc Insulated & Pvc Sheatehed / Xlpe Power Cable 1 . 1 Kv Grade Upt O 35Sqmm Size Direct In Ground Inclduing Excavation Sand Cushioning Protective Covering And Refilling The Trench Extra As Required . , Erection Of Steel Tubler Or Rail Pole Strut In Cement Concrete 1:3:6 Foundation I ( Aggregate 40Mm Nominal Size ) Including Excavation And Refilling And Secured With Holding Clamps , Bolts , Nuts Etc Required ( Dsr 11 . 4 ) , Supply And Fixing Of Pre-Fab Water Proof Street Light Pole Boxes ( Powder Coated Chocolate Colour ) Size 300Mm X 00Mm X150mm Mada Of Crca Sheet Of Thickness 1 . 6Mm With Arrangement / Connection Of 3Phase Incoming And Outgoing Supply And 01 Nos 06Amp B-Curve Mcb Complete In All Respect , Wages / Labour Charges Paid To Electricians Deputed At Respective Industrial Estates Of Siidcul For O&M Work ( For 8Months ) , Wages / Labour Charges Paid To Helpers Deputed At Respective Industrial Estates Of Siidcul For O&M Work ( For 8 Months ) , Annual Maintenance Of Main Supply Transformer For Street Lights Inclduing Dehydration Of Transformer Oil , Oti / Wti Calibration Etc . ( Once In Year ) , Service Charges Of Dg Sets ( 50Kva ) Installed At Siidcul Offices / Back Up Projects Of Street Lights Inclduing Material And Labour . ( 02 Services Per Year ) , Repairing And Rewinding Of 35Hp Motor Submersibile Tubewell Complete In All Respect Including Lowering And Lifting Upto 150 Meter , Labour & Material ( As Per Requirement ) , Repairing Of 35Hp / 10 Stage Submersibile Pump By Repair / Replacement Of Pump-Bush , Sleeves , Necking Etc . Complete In All Respect Inclduing Labour & Material . ( As Per Requirement ) , Repairing Of Submersibile Motor Control Electrical Panel By Replacing 01 No Ml4 Contactor Including Material & Excluding Labour ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Submersibile Motor Control Electrical Panel Replacing 01 No 200Amp Kit Kat Switch Complete In All Respect Including Material & Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Submersibile Motor Control Electrical Panel By Replacing 200Amp Tpn Sfu Complete In All Respect Including Material & Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge ) , Replacement Of Power Cable ( 3X6sqmm ) For Supply To Submersibile Motor Pump Complete In All Respect Including Material & Labour Charges . ( As Per Requirement ) , Rewinding & Repairing Of 15Hp Water Supply Motor With Taking Out And Fixing In Position Complete In All Respect Inclduing Material And Labour Charges . , Repairing Of Water Supply Motor Control Electrical Panel Replacing 01 No 200Amp Kit Kat Switch Complete In All Respect Including Material & Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge ) , Repairing Of Water Supply Motor Control Electrical Panel By Replacing 200Amp Tpn Sfu Complete In All Respect Including Material & Excluding Labour . ( As Per The Requirement Raised By Engineer-In Charge )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
Uttarakhand View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
50.
Housing Urban and Rular Development #10579544 Price Bid
Annual Repair And Maintenance Of Various Electrical Installation And Mechanical Equipments At Combined Food And Drugs Lab, Lawrence Road, Delhi. ( Sh Servicing / Repairing Of Sub Station Equipment And Other Miscellaneous Work ) -Servicing Of Draw Out Type 11 Kv, 400 Amp, 3 Phase Ocb From The Ht Panel Complete , Cleaning & Testing Of Wiring System, Replacement Of Minor Spare Parts Such As Spring, Nuts Bolt & Washer, Setting Right The Mechanism And Reassembling, Testing And Commissioning Etc As Reqd. 2 Servicing Of Draw Out Type 800 Amp. Acb, 3 Phase, 415 Volt 50 Hz From The Mv Panel , Complete Cleaning, Lubricating Of Moving Parts, Checking & Testing Of Wring System , Replacement Of Minor Space Parts Such As Spring, Nuts Bolts & Washer, Setting Right The Mechanismand Reassembling, Testing And Commissioning Etc. As Reqd. 3 Testing Of The Complete System Of Ht Panel For Checking The Actual Working Of The Cts, Their Wiring, Connected Idmt Relay, Shunt Trip System, BreakerS Tripping System And For Any Loose Connection By Primary Injection Method In All Three Phases And At Each Plug Setting At Actual Time Multiplier At Site With Suitable Testing Equipment I / C Rectify The Diffect In Control Wiring Etc If Any, I / C Calibration Of Relay Set By Secondary Injection Method, Cleaning The Contacts, Resetting With Required Accuracy Complete With Checking And Set Right The Wiring Etc Complete As Reqd.Complete As Required. 4 Servicing & Cleaning Of Existing 315 Kva, 11Kv / 433Volt Oil Type Kirloskar Make Transformer By Disconnection Of Ht & Lt Side Cable / Bus Trunking As Required And Reassembling Of Same After Removing Sludge, Dehumidification, Dissolved Moisture And Gas By Re-Circulation Method And Hiring Charges Of Filtration Equipment, Replace Breather Filled Silica Gel, I / C Arresting Of Oil Leakage I / C Following Testing , Hv / Lv Cable Tightening, I / C Credit For Wornout Materials, Oil Etc 5 Dehydration Of 315 Kva, 11Kv / 433Volt, 3 Phase, 50Hz, Kirloskar Make Transformer Oil Upto The Reqd. Bdv Of The Help Of Suitable Equipment After Dehydration At Site Complete As Reqd. 6 Supply & Filling Of Transformer Oil For Top Up In Transformer Of 250Kva Rating 11 / 0.433Kv, Ht OcbS & PtS Etc. Complete As Reqd. 7 Complete Servicing Of P.T. Assembling Of 11 Kv H.T. Panel Cleaning All Contacts, Checking And Tighten Control Wiring, Checking P.T. Fuse I / C Replacement Of Miner Parts Ie Suitable Size Copper Wire, Thimble, Pvc Sleeve Nut Bolt, Washer Etc Wherever, Complete Testing Etc As Reqd. 8 Servicing, Checking & Cleaning Of 11Kv Ht Panel Board By Opening The Ht Panel & CtS Chamber, Removing The Dust With Blower / Vacuum Cleaner & Dusting From The Panel, Checking, Cleaning & Decarbonising The Ht Panel, Fixed Contacts Of Swithgear & CtS With Ctc / Crc, & Tightening Of Contacts & Joints Of Bus Bars, Ct Connections, Pt Connections After Removing Ht Taping & Compound, Tightening Of Cable End Terminations, Replacement Of Burnt / Heated Thimbles, Nut Bolts, Ht Taping & Monoplast Compound Etc. Wherever Reqd. Testing Etc Complete As Reqd. 9 Providing & Fixing Power Pack Unit For Protection And Indication System Of 11 Kv Ht Panel Suitable For 24 Volt Dc Output With 230 / 110 Volt Ac Input Supply Having Battery Backup With Built In Charger, Sealed Maintenance Free Batteries, Auto Cut-Off On Full Charge, Protection Fuse On Input As Well As On Output I / C Connecting On Ht Panel Board, Testing Commissioning ( I / C Credit For Old Dismantle ) Etc Complete As Reqd. 10 Servicing, Checking & Cleaning Lt Panel Board ( Without Servicing Of Lt AcbS ) 3Phase, 4Wire, 50Hz, Ac Supply System Comprising Of Outgoing Feeders Of Rating Varies From 100A To 400A I / C Servicing Of Operating Mechanism Of All The Switchgears, Checking, Cleaning & Tightening Of Contacts Of Switchgears, Tightening Of Cable End Termination, Replacement Of Burnt / Heated Thimbles, Pvc Taping Etc. Wherever Reqd. 11 Replacement Of Voltmeter Size 96*96 Mm, 415 Volt Ac, 50 Hz In The Existing Panel Board I / C Disconnection And Dismantling The Old Worn Out Accessories From The Panel ( I / C Credit For Dismantle Material ) , Testing, Commissioning Etc Complete As Reqd. 12 Replacement Of Amp Meter Size 96*96 Mm, 415 Volt Ac, 50 Hz In The Existing Panel Board I / C Disconnection And Dismantling The Old Worn Out Accessories From The Panel ( I / C Credit For Dismantle Material ) , Testing, Commissioning Etc Complete As Reqd. 13 Supplying And Replacement Of Space Heater In Ht Panel Supply Voltage 220 Volt Ac, 50 Hz I / C Dismantelling Defective Heater ( I / C Credit For Dismantle Material ) , Testing, Commissioning Etc Complete As Reqd. 14 Replacement Of Led Type Indication Light, 220 Volt Ac, 50 Hz In The Existing Panel Board I / C Disconnection And Dismantling The Old Worn Out Accessories From The Panel ( I / C Credit For Dismantle Material ) , Testing, Commissioning Etc Complete As Reqd. 15 Supplying And Fixing Photo Luminescent , Non Toxic , Non Radioactive , Maintenance Free , Self Glowing In Various Required Locations Comprising Of Zinc Sulphide Chargeable Crystals ( Which Glows In Dark ) , Printed On U-1000 Photo Luminescent 1.2 Mm Thick Aluminium Sheet Containing Luminescent 111 As Base Chemical Cover With U / V Stablized Coating And Mounting Arrangement For Wall / Ceiling Mounting As Per Site Conditions As Required.A ) Electrical Shock Treatment Chart ( 24X36 ) 16 Design , Fabrication, Supply , Installation , Testing & Commissioning Of 3-Dimensional Led Based Character Backlit Outdoor Type Display Signage Board In Bilingual ( Hindi & English ) & As Per Approved Colour And Design , The Letter Having Height & Width As Per Aspect Ratio & Depth Minimum 2.5 Fabricated Out Of 3 Mm Translucent Acrylic Sheet I / C Joints To Be Filled Up With Waterproof Silicon Wherever Required To Make The Whole Structure Water Proof I / C Providing Inside The Letter Power Led Modules Each Comprising Of 3 Nos. Led With Pc Optical Lens Injection Moulded Of 120 Watt Maximum And Minimum 90 Lumen / Watt Along The Periphery Of Each Alphabet And Shall Be Fixed In Such A Way That To Give Uniform Bright Light, Display Board Suitable For Working On 220 V , Single Phase Ac Supply With Frame Structure Made Out Of Minimum 25 Mm X 25 Mm M.S. Square Pipe Section With Stiffners At Regular Intervals , Back Side Made Out Of G.I. Sheet Complete Having Facia Made Out Of Minimum 3 Mm Thick Acp Sheet Of Aluminium Decor Or Similar To Be Cladded On Ms Box And Connection With Suitable Size Copper Conductor Cable Etc Complete As Required. 17 Credit For Following Old / Dismantle Material Received From Above Work I / C Dismantling & Removal From Site .A ) M.S. Scrape
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
TenderDetail
Loading tenders