View Bid Results For Decorative Laminates Tenders

We found 784 Bid Results related to decorative laminates tenders. You can find Contractor details who won decorative laminates tenders along with contract details in Bid awards announcements section.

Indian Tenders
1
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
3
Live Opportunities Worldwide
Filters
Stage
607
95
82
Tender Publishing Platform
153
631
State / UT
33
190
91
77
45
37
35
30
26
25
24
23
23
23
18
15
14
11
11
9
8
8
7
6
6
5
4
3
3
2
2
1
1
1
Contract Value
205
144
337
98
Publish Date
3
2
0
0
0
Sector
27
238
170
75
59
59
21
19
19
15
13
12
10
8
8
7
7
7
7
7
6
4
3
3
2
2
2
1
Ownership
6
406
234
78
62
3
1
Within keyword
Active filters:
Showing 1–16 of 784 tenders matching your filters
1.
Rural Development #11484311 AOC
Tender For Construction Of 01 No. D Type quarter At Phc Paiksahi- Earth work in excavation of foundation in hard soil or gravelly soil within 50 m initial loead and initieal lift, including dressing and levelling the bed etc. complete 2 Supplying and filling foundation and plinth with sand wall watered and rammed with cost conveyance and royality, taxes of all materials and labour (T&P) etc. complete. 3 Cement Concrete (1:3:6) in Foundation using 4 cm size bhg metal including watering, curing with cost, conveyance, royalty and taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 4 Fly Ash Brick masonry with CM (1:6) in Foundation & Plinth including watering, curing with cost, conveyance, royalty and taxes of all materials & labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 5 Fly Ash Brick masonry with C.M. (1:6) in Superstructure using Fly Ash Bricks including watering and curing with cost, conveyance, royalty and all taxes of materials and labour (T&P) required for the work etc. complete as per direction of Engineer-in-Charge. 6 Ground floor 7 First floor 8 16 mm (5/8) thick cement plaster (1:6) over brick walls finished smooth including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 9 Ground floor 10 First floor 11 12mm thick C.P. (1:6) over brick walls finished smooth including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 12 Ground floor 13 First floor 14 R.C.C. M-25 using 20 mm & down size b.h.g.c.b chips including watering, curing with cost, conveyance, taxes and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 15 A) Column Base 16 B) Plinth Band 17 Column / Beam 18 Ground Floor 19 1st Floor 20 Lintel 21 Ground Floor 22 First floor 23 Chajja 24 Ground Floor 25 First floor 26 R.C.C. at Window Sill Level 27 R.C.C. Shelves 28 Stair Case 29 Roof Slab 30 Cutting, Bending, binding and tying the grills and placing in position including cost, conveyance, taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 31 Ground Floor 32 First Floor 33 Supplying, fitting, fixing of Vetrified tile flooring on 20mm thick bed of C.M. (1:4) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 34 Supplying, fitting, fixing of Vetrified tile in dados on 12mm thick C.P. (1:3) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 35 Supplying, fitting, fixing of Ceramic Glazed Wall tile in walls on 12mm thick C.P. (1:3) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 36 Providing, supplying and fitting and fixing of M.S. Door / Window shutters, gates & M.S. grills as per approved design etc. complete. 37 Labour for fitting, fixing of M.S. Door / Window shutters, grill gates etc. including cost of all labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. 38 Supplying, fitting, fixing of WPC Door Frames with Rebate Cuts and Finished cross section size 75mmx45mm or 90mm x 50mm including cost, conveyance of all materials and labour etc. complete as per the direction of Engineer-in-Charge. 39 Providing and fixing of 30mm thick Flush Door Shutters conforming to IS:2002 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and and well matched teak 3 ply veneering with vertical grains or cross bands and face vineers on both face of shutters inclusive of 4 Nos. of Stainless steel Butt Hinges (100mm x 60mm x 2.5mm) 40mm stainless steel screws, Cylindrical Lock (Godrej-9843), Tower Bolt SS 10 x 300mm (Bathroom) (Godrej 3264), PVC Door Buffer with SS Screw, teak wood lipping around the edges & paste with 1.5mm thick laminate on both side of the flush door, etc. including cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc. complete as per the direction of Engineer-in-Charge. 40 Supplying, fitting, fixing up window/Door (sliding type) made up aluminum Section 151-154,151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc.complete as per direction of Engineer-in charge. 41 Structural Steel work riveted, bolted or welded in built-up section, trusses and framed work including cutting, hoisting fixing in position and applying a primer coat of approved steel primer etc. complete. 42 Supplying, fitting, fixing of Bhusan colour sheets 0.50mm in roofing including drilling holes in wind ties and fixing with J or L hooks, fixing of ridges, valleys, wind ties etc. including cost, conveyance and taxes of all materials and labour, T&P etc. as required for the work complete as per the direction of the Engineer-in-Charge. 43 Applying Acrylic Wall Putty (Water Based) to wall surface including cost of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 44 Ground Floor 45 First Floor 46 Distempering two coats to walls with distemper of approved shade on new work to give an even shade including cost of distemper etc. complete as per specification and direction of the Engineer-in-charge. 47 Ground Floor 48 First Floor 49 Finishing out side wall surface with Weather Coat (I.S.I) two coats over a coat of primer with any approved shade including cost of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 50 Ground Floor 51 First Floor 52 Painting two coats to doors & windows etc. with any approved paints including cost, conveyace of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge. 53 Ground Floor 54 First Floor 55 Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete as per the direction of Engineer-in-Charge. Please Enable Macros to View BoQ information
Contract Date: Jul 01, 2026 Contract Value : ₹ 26.97 Lakh
Government Departments No of Bidders 9
Odisha View Result →
2.
Defence #11453856 AOC
Bids Are invited for Removal Of Old Fixtures , Flush Closing Arrangement , Glass Enclosure Closing , Glass Partition , Glass Railing , Waterproof Surface Lamination , Lamination Of Ceiling Surface , Reception Back Closure , Dining Hall Backdrop , Slide And Fold Partition With Jali , Vanity Counter , Mirror Panelling , Hpl Cubicle Partition With Closing Arrangement , Gypsum Board Ceiling With Finishing , Cove Light , Calsium Silicate Ceiling With Finishing , Ceiling With Laminate Finishing , Buffet Counter , Reception Counter , Ergonomic Illumination , Washroom Refubishment , Fabrication Of Protective Covering , Rubber Matting For Floor , Skirting Trims , Wallpapering , Decorative Hanging Ceiling , Architectural Fees , Rendering , Marquetry Patina Muriel , Etagere , Chair Rail Total Quantity : 46233
Contract Date: Ref. Documents Contract Value : ₹ 1.30 Crore
Government Departments No of Bidders 4
Tamil Nadu View Result →
3.
Defence #11434355 AOC
Bids Are invited for Plywood 8Ft X 4Ft Commerial One Side Teak Face Size 12 Mm , Ply Wood 8Ft X 4Ft Commercial One Side Teak Face Size 6Mm , Prelaminated Particle Board 8Ft X 4Ft Thickness 19Mm , Ply Wood 8Ft X 4Ft Commercial One Side Teak Face Size 4Mm , Plastic Laminated Sheet Sunmica 4Ft X 8Ft X 1 Mm Different Shade , Glass For Side Table With Tinted Spl Design 60Cm X 46Cm X12mm , Glass Top For Table Centre 61Cm X 122Cm X10mm , Glass Top For Peg Table 46Cm X 31 Cm X10mm , Mirror For Table Dressing Ladies Size 121Cm X 42Cm , Glass For Dining Table 150Cm X 90Cm X 12Mm , Sunwood Decorative Laminate Sheet High Glossy 2400Mmx1200mmx0.8Mm , Mirror For Table Dressing Gents 38Cmx 76Cm , Paint Olive Green Oblique Grey , Black Paint , Glass Drill Bit Set 3 Pieces 4Mm, 6Mm And 8Mm Glass , Brush Painting 75Mm , Brush Painting 50 Mm , Flat Brush 25 Mm , Block Board 19Mm 8Ft X 4Ft , Drywall Screw 3.5 X 75Mm Pack Of 500 , Drywall Screw 3.5 X 62Mm Pack Of 500 , Drywall Screw 3.5 X 50Mm Pack Of 500 , Drywall Screw 3.5 X 38Mm Pack Of 500 , Drywall Screw 3.5 X 25Mm Pack Of 500 , Drywall Screw 3.5 X 19Mm Pack Of 500 , Drywall Screw 3.5 X 13Mm Pack Of 500 , Round Sandpaper 125Mm Dia 320 Grit Pack Of 50Pcs , Round Sandpaper 125Mm Dia 180 Grit Pack Of 50Pcs , Round Sandpaper 125Mm Dia 120 Grit Pack Of 50Pcs , Round Sandpaper 125Mm Dia 60 Grit Pack Of 50Pcs Total Quantity : 369
Contract Date: Ref. Documents Contract Value : ₹ 6.32 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Meghalaya View Result →
Uttar Pradesh View Result →
5.
Heavy Industries and Public Enterprises #11321092 Technical Bid
Tender For Civil And Mep Works For Setting Up Hindlabs Minor Lab, Barpeta, Assam- 1 Civil Works 2 Solid Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 30X20X15Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In : Cm 1:6 ( 1 Cement : 6 Coarse Sand) Etc Complete 3 12 Mm Cement Plaster Of Mix:1:6 (1 Cement : 6 Fine Sand). 4 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade:New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) 5 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 6 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 7 Providing And Laying Premiumvitrified Tiles In Floor In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier,Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Glazed Vitrified Tiles Matt/Antiskid Finish Of Size Size Of Tile 600 X 1200 Mm 8 Providing And Laying Premium Vitrified Wall Tile In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600 X 1200 Mm 9 Providing And Fixing Fiber Glass Reinforced Plastic (Frp) Door Frames Of Cross- Section 90 Mm X 45 Mm Having Single Rebate Of 32 Mm X 15 Mm To Receive Shutter Of 30 Mm Thickness. The Laminated Shall Be Moulded With Fire Resistant Grade Unsaturated Polyester Resin And Chopped Mat. Door Frame Laminate Shall Be 2 Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fiber Glass From All Sides. M.S. Stay Shall Be Provided At The Bottom To Steady The Frame. 10 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 11 Providing And Fixing To Existing Door Frames.30 Mm Thick Fiberglass Reinforced Plastic (F.R.P) Flush Door Shutter In Different Plain And Wood Finish Made With Fire Retardant Grade Unsaturated Polyester Resin, Moulded To 3 Mm Thick Frp Laminate All Around, With Suitable Wooden Blocks Inside At Required Places For Fixing Of Fittings And Polyurethane Foam (Puf) / Polystyrene Foam To Be Used All Filler Material Throughout The Hollow Panel, Casted Monoolithically With Testing Parameters Of F.R.P. Laminate Conforming To Table - 3 Of Is : 14856, Complete As Per Direction Of Engineer- In-Charge. 12 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 13 Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 14 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps 15 Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is 13983 With C.I. Brackets And Stainless Steel Plug 40 Mm,With Swan Neck Faucet With Pipe In Let And Drain Provision, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required:Kitchen Sink With Drain Board510X1040 Mm Bowl Depth 250 Mm 16 Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms 17 Providing And Fixing Cp Towel Rod Complete Fixed With Cp Brass Screws Of Approved Quality Of Minimum 600Mm Length Approved As Per The Requirement Of Engineer In Charge. 18 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions: 45 Cm Length15 Mm Nominal Bore 19 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Flexible Pipe 40 Mm Dia 20 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is: 893115 Mm Nominal Bore 21 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 15 Mm Pipe 10Kgf/Cm2 22 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work,Including Cutting Chased And Making Good The Wall Etc. 20 Mm Pipe 12 Kgf/Cm2 23 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 32 Mm Dia 6 Kgf/Cm2 - External Work - Exposed On Wall 24 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/ Clips/ At 1.00 M Spacing . This Includes Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 110 Mm Dia 6 Kgf/Cm2 - External Work- Exposed On Wall 25 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia 45 Degree Elbow 26 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75X75X75 Mm Dia Door Tee 27 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75 Mm Dia Bend 28 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work, Including Cutting Chases And Making Good The Wall Etc. 50 Mm Pipe 10 Kgf/Cm2 29 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes,Including Jointing With Pvc Solvent Cement - 75 Mm Dia Vent Cowl 30 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia End Cap 31 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -110 Mm Dia End Cap 32 Providing And Fixing Pvc Moulded Fittings/Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110X110X110 Mm Dia Door Tee 33 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement- 110 Mm Dia Bend 34 Providing And Fixing Pvc Pipes Including Fixing The Pipe With Clamps/Clips At 1.00 M Spacing. This Included Jointing Of Pipes With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 75 Mm Dia 6Kgf/Cm2 - External Work- Exposed On Wall 35 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Partition Of Approved Brand And Manufacture, Including Top & Bottom Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Fittings, All Complete As Per Direction Of Engineer-In-Charge. 36 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Door Shutter Of Approved Brand And Manufacture, Including Providing And Fixing Top & Bottom Pivot & Double Acting Hydraulic Floor Spring Type Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Door Fittings, All Complete As Per Direction Of Engineer-In-Charge ( Door Handle, Lock And Stopper Etc To Be Paid Separately) 37 Providing And Fixing Ss H Handle Having Min 45 Cm Length In Toughed Glass Door Including All Necessary Screws Etc. Complete. 38 Providing And Fixing 3M Fasara Frosted Etching Film Of Thickness 25 Microns Self- Adhesive Of Approved Colour, Shade, And Quality With Cutting As Per Approved Design And Pattern, Including Cleaning Of Glass And Making Surface Smooth For Fixing Of Film To The Surface, All Completed As Per The Direction Of The Engineer In Charge. 39 Providing And Fixing Of Glass Door Ss Patch Lock With Out Handle In Toughened Glass Door Including All Necessary Screws Etc. Complete 40 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing /Paneling, C.P. Brass/ Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge.(Glazing, Paneling And Dash Fasteners To Be Paid For Separately):For Fixed Portionpowder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) 41 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/ Neoprene Gasket Required (Fittings Shall Be Paid For Separately)Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is : 1868, Minimum Anodic Coating Of Grade Ac 15) 42 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is : 12823 Grade I Type Ii, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer - In- Charge.Pre- Laminated Particle Board With Decorative Lamination On Both Sides 43 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 4.0 Mm Thickness (Weight Not Less Than 10Kg/Sqm) 44 Filling The Gap In Between Aluminium/ Stone/ Wood Frame And Adjacent Rcc/ Brick/ Stone/ Wood/ Ceramic/ Gypsum Work By Providing Weather/Structural Non Sag Elastomeric Pu Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete,Complying To Astm C920, Din 18540-F & Iso 11600Upto 5 Mm Depth And 5 Mm Width 45 Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 46 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Single Rubber Stopper 47 Providing And Fixing Bright Finished 100 Mm Mortice Lock With 6 Levers Without Pair Of Handles Of Approved Quality For Aluminium Door, With Necessary Screws Etc Complete As Per Direction Of Engineer- In- Charge. 48 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete. 49 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised(Anodic Coating Not Less Than Grade Ac 10 As Per : 1868), Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:300X10 Mm 50 Vinyl Transparent Vision Glass Stickers: Supply And Pasting Of Vinyl Transparent Vision Glass Stickers In Approved Size And Design In Glass Partition And Door As Per The Instruction Of Engineer In Charge. 51 Backlit Acrilic Board With Projected Letters: Supply, Installation, Testing And Over Suitable Welded And Painted 25X25X3Mm Ms Angle Frame In Suitable Location And In Proper Line And Level With All Necessary Fastners, Supports Etc. Electrical Works Likes Electrical Wirings, Connections, Fittings, Externaly Fixed Weather Proof 2/3 Pin Plug Points And Sockets Including Boxes Etc. To Be Complete Properly. All Fabrication And Fixing Should Be Done As Per Approved Design And Instructions Of Engineer In Charge. (Note: Only Front Elevation Will Be Measured.) 52 Furniture 53 Supply And Erection Of Airport Type 3 Seater Waiting Chair With Powder Coated Chromium Finish Having Minimum Dimensions 1675Mm Length X 710Mm Width X 775Mm Total Height And 400Mm Seat Height . Seat: High Quality Cold Rolled 1.2Mm Thick Steel Perforated Sheet Pressed And Welded To Form The Shape. Arm & Leg: High Quality 1.2Mm Thick Ms Tube / Sheet . Cross Bar: High Quality Cold Rolled 2Mm Thick Steel Sheet Pressed And Welded To Form The Shape. 54 Supply Of Phlebotomy Chair With Optimum Design Made Up Of Ms Power Coated Frame And Up Upholstery Type Seat,Back Rest And Arm Rests.Both Side Arm Rest Should Be With Height And Position Adjustable System And All As Per The Instruction Of Engineer In Charge. 55 L-Type Workstation Of Overall Size (1350 * 600)Mm + (1000 * 450)Mm X 750 Mm (L X D X H) And Pedestal Unit Made Up Of 18 Mm Thick Exterior Grade-I Mdf Board On All Sides Conforming To Is:14587 From Approved Makes Such As Century/Greenply/Fineply Or Equivalent With Decorative Laminate On Both Side And All Edges To Be Fixed With 2Mm Thick Pvc Edge Beading. One Three-Drawer Modular Pedestal Unit Of Minimum Size 450 Mm (W) X 500 Mm (D) X 650 Mm (H) All With Retractable Key Board Tray, Drawer Channels, Hinges, Handles, Individual Locking System, And All Necessary Fittings And The Workstation Should Have An Electrical Flip Box With 2 Nos Universal Power Socket & 1 No Data Socket Etc And Cable Management Tray. All Work As Per The Approved Design And Instruction Of The Engineer-In-Charge/Architect. 56 Providing And Erection Of Reception Counter Table Of Length 1200 Mm And First Level Should Be Provided At A Height Of 750 Mm And Width 600 Mm And The Second Level At A Height Of 1050Mm From Base With A Width Of 300. The Table Made Of 18Mm Thick Pre Laminated Medium Density Board Of Exterior Grade (Grade I) Is: 14587:1998 With Decorative Laminated Finish On Both Sides And 2 Mm Thick Pvc Beading On All Edges, Including Electrical Flip Box, Cable Measurement Tray, Grommets With 3 Nos Universal Power Socket And Ethernet Port, Three Drawer Pedestal Unit With Drawer Channel, Handles, Hinges, Lock All Complete As Per Approved Drawing And Installation Of Engineer In Charge/Architect. 57 Supply And Installation Of Visitors Chair Medium Back, Mesh Back Cushion Seat With Fixed Supports Made Of 304 Stainless Steel/ Powder Coated Ms Of Approved Colour Or Shade As Per The Instruction Of The Engineer In Charge 58 Revolving Chair: Medium Back Ergonomic Chair With Five Nos. Star Shaped Nylon Base. Castor: 50Mm Diameter Nylon Twin Wheel, Gas Lift Height Adjustment, Back Angle Adjustment , Fixed Armrest Providing Natural Resting For Arms. Seat With Pu Coated Foam Backed Fabric, Back Rest With Mesh Type Fabric, Upholstery: Heavy Duty Rubber Backed Fabric In Black 59 Counter Height Stools :Supply And Erection Of Counter Height Stools ( Bar Stools ) Of Following Specifications : Revolving Adjustable Chrome Plated Steel Body Chairs With Resistance To The Corrosion. Cushion Seat With Lift Mechanism For Adjustment Of Height. Minimum Height 750Mm Before Expansion. Medium Back Rest And Arm Rest. Item Shall Be Of Reputed Make. 60 Supplying And Fixing Of Lab Work Table With 18 Mm Thick Edge Moulded Granite Top Supported Over 18Mm Thick Marine Ply Wood Of 2500Mm,L X 1200Mm,W X 850Mm, H And Powder Coated Gi Frame Of Section Size Not Less Than 50X50X1.5 Mm Including And Providing 4 Nos Under Storage Movable Cabinents Of Size 600Mm,L X 450Mm,D X 750 Mm,H And Powder Coated Steel Sheet Of Thickness Not Less Than 1Mm With 1 Drawer And Partition Bottom Storage Space With Door Including Drawer Channels, Individual Locks And Handles All As Per The Approved Drawing And Instructions Of Engineer In Charge 61 Lab Work Bench -The Work Bench Top Made Up Of 18Mm Thick Granite Top Edge Moulded Over 18 Mm Thick Marine Plywood And Gi Powder Coated Frame Work Of Section Size Not Less Than 50X50X1.5Mm. The Width Of The Table Shall Be 750Mm And Height Shall Be 850Mm. The Frame Provided With Level Adjusting Screws Fixing Accessories ,Carriage Of Material All Complete As Per The Approved Drawings And Direction Of Engineer In Charge.Note Only Length Of The Table Shall Be Measured For Making Payment. 62 Cabinet/Wardrobe: Providing And Errection Of Cabinet/Wardrobe Unit Made With 18 Mm Thick Prelaminated Mdf Board Of One Side Decorative Lamination And Other Side Balancing Lamination Having Total Unit Dimension Of 900Mm,L X 450Mm,Dx 2400Mm,H And All Edges To Be Sealed With Pvc Edge Beeding Of 2.00 Mm Thick Including All Fittings Such As Autoclose Hinges,Chromium Plated Brass Individual Locks & Handles ,Tower Bolts Etc All Required. All Shelves To Be Fix With Proper Support And Bracket Holders At A Spacing Of 400 Mm Centre To Centre And All As Per The Drawings And Instruction Of Engineer In Charge. Board Make : Greenlam/ Merino / Century/ Equivalent . Only Front Elevation Will Be Measured. 63 Overhead Storage: - Providing And Fixing Overhead Storage Unit With Minimum 18 Mm Thick Pre-Laminated Medium Density Fiber Board Exterior Grade (Grade-I) Is: 14587:1998 Marked With One Side Decorative And Other Side Balancing Lamination. Cupboard Shutters Edge To Be Sealed With Pvc Edge Bending Tape 2.00 Mm Thick Of Approved Brand Including Isi Marked Nickel Plated Bright Finishing M.S. Piano Hinges Conforming To Is:3818 Marked With Fixing Chromium Plated Brass 50 Mm Cupboard Or Wardrobe Knobs, Special Quality Chromium Plated Brass Cupboard Locks With Six Levers Of Approved Quality Including Necessary Screws Etc. Complete. Only Front Elevation Will Be Measured. 64 Electrical- Wiring 65 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required.Group C 66 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 67 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 68 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Offrls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessedmedium Class Pvc Conduit As Required2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire 69 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2 X 6 Sq.Mm + 1 X 6 Sq.Mm Earth Wire 70 Fixtures 71 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front Onsurface Or In Recess, Including Providing And Fixing 3 Pin 5/6 Amps Modular Socketoutlet And 5/6 Amps Modular Switch, Connection Etc. As Required. (For Light Plugs To Beused In Non Residential Buildings) 72 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front Onsurface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 Ampsmodular Socket Outlet And 15/16 Amps Modular Switch, Connection Etc. As Required 73 Supplying & Fixing Suitable Size Gl Box Wih Modular Plate And Cover In Front Onsurface Or In Recess Including Providing And Fixing 25 A Modular Socket Outlet And 25A Modular Sp Mcb, C Curve Including Connections, Painting Etc. Asrequired. 74 Supply, Installation Of Surface Mounted Led Tubelight. The Luminaire Should Have Cri 80 And Cct Of Both 6500K/5700K. The Luminaire Shall Be Compliant With Ip20 And Ik02 Classification. Luminaire Shall Be Designed To Emit At Least 3600Nominal Lumens And Efficacy Of Atleast 105 Lumen/Watt And Minimum System Wattageof 30 Watts. The Luminaire Shall Be Designed So As To Ensure Lumen Depreciation Of Upto 30% Over 25K Burning Hours. The Electronic Driver Used Shall Have A Power Factor 0.95 And Thd. Make - Philips, Crompton, Wipro, Havells 75 Supply And Installation Of Surface/Recess Mounted Led Round/Square Luminaire With Crca Housing Suitable With Fully Diffused Diffuser For General Lighting In Offic Eareas. The Luminaire Should Have Cri 80 And Cct Of Both 6500K/5700K, Cool White Light. The Luminaire Shall Be Compliant With Ip20 And Ik02 Classification.Luminaire Shall Be Designed To Emit At Least 1000 Nominal Lumens And Efficacy Ofatleast 105 Lumen/Watt And Minimum System Wattage Of 10 -15 Watts. The Luminaire Shall Be Designed So As To Ensure Lumen Depreciation Of Up To 30% Over 50K Burning Hours. The Electronic Driver Used Shall Have A Power Factor 0.95 And Thd. For Light Fittings To Be Installed In False Ceiling, All Required Cuttings Shall Be Made And Damages Shall Be Made Good As Per The Direction Of Engineer In Charge. Make-Philips, Crompton, Wipro 76 Supply, Conveyance, Installation, Testing And Commissioning Of Ceiling Fans Of The Following Sizes Using Standard Accessories Excluding Resistance Type Regulator, Wiring The Down Rod With Pvc Insulated And Pvc Sheathed 650/1100V Grade 3 Core Round Copper Conductor Flex Wire Or With Extended Original Wiring Etc. As Required. 1200Mm Sweep - 5 Star Rated, 3 Blade Ceiling Fan Complete With 300Mm Down Rod, Canopies,Shackles. 77 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existingmodular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 78 Supplying, Conveyance And Installation Of 3 Blade, 400 Mm Sweep, 1400 Rpm Wall Mount Fan Including Frames And All Mounting Accessories Complete. Recommended Make: Usha/ Havells/ Bajaj / Almonard Or Equivalent 79 Supplying, Conveyance And Installation Of 150 Mm Sweep,1800 Rpm Exhaust Fanincluding Frames And Allmounting Accessories Complete. Recommended Make: Usha/Havells/Bajaj Or Equivalent 80 Supplying And Fixing 3 Pin, 5 Amp Ceiling Rose On The Existing Junction Box/ Wooden Block Including Connection Etc As Required. 81 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required. 82 Supply, Installation Of 12 Watt Led Bulb. 83 Db And Switchgear 84 Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall , Making Good The Damages, Colour Washing Etc. As Required6 Way (8+18) - Double Cover Tpn Vertical Db With Provision For Fixing 4P Mcb / Isolator/ Rccb/ Rcbo As Incomer And Sp/ Tp Mcb As Outgoing (Ip 42/43) 85 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 16 Way, Double Door 86 Supplying And Fixing 5A To 32 A Rating, 240/415 Volts, 10 Ka, \\C\\ Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole 87 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 88 Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 89 Supplying And Fixing Following Rating, Four Pole, 415 Volts, Isolator In The Existingmcb Db Complete With Connections, Testing And Commissioning Etc. As Required.63Amps 90 Supplying And Fixing Following Rating, Four Pole, (Three Phase And Neutral), 415Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30Milli Amperes In The Existing Mcb Db Complete With Connections, Testing Andcommissioning Etc. As Required.63 Amps 91 Supplying And Fixing Cable End Boxes (Ip 43) Suitable For Following Single Poleand Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess,Complete With Testing And Commissioning Etc. As Required.For 6 Way, Double Door Spn Mcbdb 92 Cctv And Networking 93 Supply, Conveyance And Installing Of 2Mp Ip Dome/Bullet Camera Having 1/3Progressive Scan True Day And Night Colour Ir Camera Having Effective Pixel Of 2Mp, Video Frame Rate Of 2Mp @30Fps, Minimum Illumination Of 0.01 [email protected], 0Lux@Ir On, 20 M Ir Range, 24 Ir Led, Awb, Agc, Blc, 2D Noise Reduction,With 3.6Mm Board Lense, 12 Vdc, Poe Ip67 Rated Weatherproof Performance. 1 Year Warranty. Make: Bosch/Cp Plus/Honeywell Or Equivalent 94 Supply, Installation And Integration Of 8 Channel Embedded Linux Poe, Nvr (Network Video Recorder), Having Dual Core Embedded Processor, Must Connect 8 Channel Ip Cameras , Should Support Min 2 Sata Hdd Each Of 6Tb And Must Recordvideo Simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smartevent, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(Hevc)/H.264+/H.264, 2 Year Warranty, Image Quality Should Be Maintainedthroughout The Warranty Period. Make: Bosch/Cp Plus/Honeywell Or Equivalent 95 Supply And Installation Of Network Switch. 8 Port Poe Switch 1000Base-T Copper Ethernet Poe+ Connections, 10M/100M/1G Rj-45 Copper Ports, 1000Base-X Fiber Sfp Ports, 8 Port Auto Sensing 10/100/1000 Mbps Poe, Minimum Cpu Memory 512 Mb With 2 Sfp/Combo Ports, Energy Efficient Ethernet (Ieee 802.3Az). Make: Cisco/Cp Plus/ Netgear Or Equivalent 96 Supply And Fixing Of 6U Wall Mounting Rack With Supply And Fixing Of Mounting Brackets For Support Lockable Front Door And Detachable Side Doors, Cable Manager And Pdu Of 4 Or 6 Sockets Including Cooling Fan With Accessories Complete 97 Supply And Installation Of 8Tb Hard Disk 98 Supply And Installation Of Led Color Monitor Of Minimum 32 Inch Screen, Complete,Uhd Display Make: Lg/Samsung/Panasonic Or Equivalent. 99 Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/Recessed Steel/Pvc Conduit As Required1 Run Of Cable 100 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25 Mm 101 Supplying And Fixing Rj45 Outlet Including Cover Plate, Keystone Jack And Gang Box Supporting, Connection Etc. As Required 102 Air Conditioning System 103 Supply, Installation, Testing And Commissioning Of Split Air Conditioner Of Followingcapacity And Specifications: Consisting Of High Wall-Mounted Type Room Unit (Fan Coil) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Energy-Efficient Suitable Rotary Compressor For Operation On Single Phase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room (Fan Coil) Unit On Wall, Standard 4M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room & Condenser As Per Site Conditions, Comprising Of 1Inch Dia Drain Pvc Pipe With Insulation Up To 4 M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigerant Gas, Suitable Stabilizer Etc Complete As Required. (Make: Voltas, Blue Star, Hitachi, Carrier Or Equivalent). 2 Tr 3 Star Rated (Inverter Type Ac) As Per Bee 104 Supply, Installation, Testing And Commissioning Of Split Air Conditioner Of Following Capacity And Specifications: Consisting Of High Wall-Mounted Type Room Unit (Fan Coil) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Energy-Efficient Suitable Rotary Compressor For Operation On Singlephase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room (Fan Coil) Unit On Wall, Standard 4 M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room & Condenser As Per Site Conditions, Comprising Of 1Inch Dia Drain Pvc Pipe With Insulation Up To 4 M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigerant Gas, Suitable Stabilizer Etc Complete As Required. (Make: Voltas, Blue Star, Hitachi, Carrier Or Equivalent). 1.5 Tr 3 Star Rated (Inverter Type Ac) As Per Bee 105 Supply And Installation Of Additional Copper Piping, Cabling From Indoor To Outdoor And Drain Piping For Air Conditioning Unit With Proper Insulation Including All Required On Wall/Above False Ceiling Complete 106 Supply, Installation, Testing And Commissioning Of True On-Line Double Conversion 6 Kva Ups System With 1:1 Crest Factor Single Phase Phase Input – Singlephase Output. Inversion Shall Be Microprocessor Controlled With Instantaneous Sine Wave Control Using Igbt. Ups Shall Have Standard Display Features, Alarms, Safeties, Etc Input Voltage Range : A) Phase & Single Phase With Ground B)Votage Range 190 Vac & 250 Vac C)Input Frequency : 50/60 Hz D)Power Factor : 0.95 Or Above E)Thd : Less Than 5% With Full Load Bypass F) Voltage Range & 200Vac & 240 Vac G) Frequency Range – 45-55 Hz/55-65 Hz Output Voltage Range H)Voltage Range & 200Vac & 240 Vac I)Frequency Range & 50/60 Hz J)Voltage Distortion & Linear Load = 2% K)Voltage Distortion – Nonlinear Load = 5% L)Output Waveform – Pure Sinewave M) Minimum Back Up Time : Continuous 60 Minutes At Full Load Rectifier Shall Be Full Wave Type (Shall Fully Meet The Specified Input Power Requirements) Battery Type: Sealed Lead Acid Maintenance Free Dc Voltage : 24/48/96V Dc System, Battery Nos And Capacity Shall Be Designed For Optimum Storage Space. Make: Liebert Vertiv/Apc By Schneider/Numeric By Legrand 107 Visi Cooler And Refrigerator 108 Supply And Installation Of 260 Litre Refrigerator, Direct-Cool Model With A Minimum 3-Star Bee Rating And Stabilizer-Free Operation. It Shall Use Eco-Friendly Refrigerant (R600A) And Have A High-Efficiency, Low-Noise Compressor. The Unit Shall Include Toughened Glass Shelves, A Vegetable Crisper, Bottle Storage For 2L Bottles, An Internal Freezer Compartment, And A Removable Anti-Bacterial Gasket. It Shall Operate On 230V, 50Hz Ac And Include Standard Accessories Such As An Ice Tray And Egg Tray. The Refrigerator Shall Have 1-Year Comprehensive Warranty And 10-Year Compressor Warranty, With Bis Certification.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Assam View Result →
6.
Educational and Research Institute #11316829 AOC
Bids Are invited for Customized Amc/Cmc For Pre-Owned Products - Construction; Construction; Comprehensive Maintenance Contract (Cmc); Not Applicable; Yes - Providing And Laying Of Rcc Platform To Raised Flooring With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Aggregate : 4 Aggregate ) With Specific Area As Per Required And As Per Direction Of Site In Charge , Supplying, Fitting And Fixing 8Mm Thick Laminated Wooden Flooring Work Conforming To En13329:2006 With Plank Size Not Iess Than 1200 Mm X 190 Mm (With Unilin/Tongue-Groove Locking Arrangement) Having 0.2Mm Thick Top Abrasive Layer Over A Decorative Layer Followed By A High-Density Fibreboard (Hdf) Having Density > 850 Kg/M3 Substrate Core Over A Resin Saturated Backing Layer And Installing Through Unilin Or Tongue- Groove System (Having Locking Strength Not Less Than 1000 Kg/M) Over A 2 Mm Thick Under Layer Polyurethane Foam On Polythene Sheet 250 Micron, Over A Smooth, Flat, Hard Subfloor Free From Moisture (< 8%), Grease Etc. Complete In All Respect With Requisite Accessories Like End Profile, Transition Profile, Reducer T Profile Etc. Wherever Required And Preparation Of Base Including All Other Incidental Works As Per Direction & Satisfaction Of Engineer In Charge. Cost Of Laminate Floor Accessories Only (Skirting ,End Edge, T- Moulding, Reducer) Shall Have To Be Added Separately, Wherever Required As Directed By Engineer In Charge In Approved Shade & Colour As Per Drawing Specification ( Including All Lead And Lift )(Basic Rate :-Rs 180/- Per Sft) , Supplying Laminate Floor Accessories (Skirting, End Edge, T Moulding Reducer ) To 8Mm Thick Laminated Wooden Flooring Work Conforming To En13329:2006 With Plank Size Not Iess Than 1200Mmx 190 Mm (With Unilin/Tongue-Groove Locking Arrangement) Having 0.2Mm Thick Top Abrasive Layer Over A Decorative Layer Followed By A High-Density Fiberboard (Hdf) Having Density > 840 Kg/M3 Substrate Core Over A Rasin Saturated Backing Layer And Installing Through Unilin Or Tongue- Groove System (Having Locking Strength Not Less Than 1000 Kg/M) Over A 2 Mm Thk Under Layer Polyurethane Foam On Polythene Sheet 250 , Providing And Fixing Wall Panelling With Wpc Luvar Or Fluter Panel With 12 Mm Thick , Approved Colour , Pattern , Design , Shade, Fixing With Required 12 Mm Ply For Support As Per Required Area And As Per Direction Of Site In Charge , Providing And Fixing 15 Mm Thick Densified Tegular Edged Eco Friendly Light Weight Calcium Silicate False Ceiling Tiles Of Approved Texture Of Size 595 X 595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanised Steel Sections (Galvanising @ 120 Grams Per Sqm Including Both Side) Consisting Of Main T Runner Suitably Spaced At Joints To Get Required Length And Of Size 24X38 Mm Made From 0.33 Mm Thick (Minimum) Sheet, Spaced 1200 Mm Centre To Centre, And Cross T Of Size 24X28 Mm Made Out Of 0.33 Mm (Minimum) Sheet, 1200 Mm Long Spaced Between Maint At 600 Mm Centre To Centre To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24 X28 Mm Made Of 0.33 Mm Thick (Minimum) Sheet To Be Inter Locked At Middle Of The 1200X 600 Mm Panel To From Grid Of Size 600X600 Mm, Resting On Periphery Walls /Partitions On A Perimeter Wall Angle Pre-Coated Steel Of Size(24X24x3000 Mm Made Of 0.40 Mm Thick (Minimum) Sheet With The Help Of Rawl Plugs At 450 Mm Centre To Centre With 25 Mm Long Dry Wall Screws @ 230 Mm Interval And Laying 15 Mm Thick Densified Edges Calcium Silicate Ceiling Tiles Of Approved Texture In The Grid, Including, Cutting/ Making Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc., Wherever Required. , Providing And Fixing Electrical Work For Conference Room Including Wiring Inside Room Floor And Provision For Ac And Celling Light 600 X 600 Roof 36 Watt With Switches And Socket Power , And Underground Wiring With In Room As Per Required Including 2.5 To 6Mm Copper Wire As Where Required , Modular Switches And Power Socket With 4 Nos Wall Fan , Electrical Wiring With Room Complete As Per Direction Of Site In Charge , Providing And Fixing Cupboard Shutter With 19 Mm Thick One Side Decorative And Other Side Balancing Lamination Factory Pressed Bwp Grade Marine Ply As Per Is 710 Of Approved Brand Including 2 Mm Thick Pvc Edge Banding Tape With Hot Glue By Edge Bending Machine Etc. With Auto Closing Spring Loaded Hinges (Hydraulic Type) Etc. Complete As Per Direction Of Engineer-In-Charge. (Payment Of Providing And Fixing Auto Closing Hinges Shall Be Paid Separately) , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. , Providing And Fixing 18 Mm Thick Plywood For Extended Floor Area As Per Required Size With Proper Fixing With Nails And Fastner On Floor Or Wall As Per Direction , Providing And Fixing Computer Table For Lab Using 19 Mm Thick Hdmr Board With 1 Mm Thick Top Laminate With Required Lenth 5X.075X0.9 Mtr With Partiton Every 900 Mm Both Side 1Mm Laminate , With Wooden Stand For Foot Rest, And Fixing With Fastner, Nail , Edge Bending 19Mm Tape Matching Colour , Rawl,Plug, Stright With Proper Fixing As Per Direction Of Site In Charge, , Removing And Re Fixing Wooden Door As Per Required Size With Change Of Ss Hinges Fixing 35Mm Thick Screw With Fixig Margin As Per Required Area As Per Direction Of Site In Charge , Any Other Work Paid As Per Civil 2023 Dsr Actual Rate .. And As Per Cpwd Rule,Note: The Payment Of Dsr23 Items (Which Are Inclusive Of Gst) Shall Beregulated As Below:Rate Of Dsr23 Items & 27.0 Additional Miscellaneousitems I/C Gst = X
Contract Date: Ref. Documents Contract Value : ₹ 39.65 Lakh
Boards / Undertakings / PSU No of Bidders 3
Delhi View Result →
7.
Defence #11315928 AOC
Bids Are invited for Decorative Laminate Sheet (Q3) Total Quantity : 55
Contract Date: Ref. Documents Contract Value : ₹ 49,500
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttarakhand View Result →
8.
Educational and Research Institute #11303303 AOC
Bids Are invited for Furniture And Renovation Work Of Director Of Research Office Plywood 19Mm Bwr Md Table Storage Sides - 19Mm Bwr Grade Plywood 8X4 Ft Sheet , Plywood 12Mm Bwr Wall Panelling Cabinet Sides - 12Mm Bwr Is 303 8X4 Ft Sheet , Plywood 8Mm-Shutters, Drawer Fronts - 8Mm 8X4 Ft , Laminate Sheet Table Top And Cabin Accent - 1Mm Formica Or Merino Laminate 8X4 Ft , Veneer Sheet Md Table Top And Front - 0.6Mm Natural Walnut Veneer 8X4 Ft , Concealed Hinges Hettich Or Ebco All Shutters - 165 Soft-Close Concealed Hinge , Drawer Slides Full Extension Ebco Ball Bearing - 18 Inch Full Extension Ball Bearing Channel , Cabinet Handles Ss Bar Pull 160Mm Cc Brushed Chrome - Ss Brushed Chrome 160Mm Cc , Tape All Exposed Ply Edges - 22Mm Pvc Edge Banding 50M Roll , Md L Shape Executive Table Fabrication Labour - 6Ftx3ft + 3Ftx2.5Ft Return, 19Mm Bwr + Veneer , Full Height Wall Storage Cabinet Fabrication Labour - 8Ft Hx6ft W 2 Shutters 19Mm Bwr + Lam Finish , Decorative Wall Panelling Fabrication Labour - Work , Reception Counter Fabrication Labour - Work , Solid Wood Flush Door Md Cabin Walnut Veneer Both Sides - Work , Wooden Pelmet Or Ceiling Box Over Window Blind Concealment - 19Mm Bwr Box Walnut Veneer , Carpenter Labour Skilled Site Fabrication And Finishing - Work , Helper Labour Carpentry Material Handling And Assist - Work , 2.5 Sqmm Frls Copper Wire Power Points And Ac Circuits - 2.5Sqmm Frls 1100V 90M Coil , 1.5 Sqmm Frls Copper Wire Light And Fan Points - 1.5Sqmm Frls 90M Coil , 4.0 Sqmm Frls Copper Wire Ac Dedicated Circuit - 4Sqmm Frls 90M Coil , 25Mm Isi Pvc Conduit Pipe Concealed Wiring - Medium Duty Isi Pvc Conduit 3M Length , 20Mm Isi Pvc Conduit Pipe Light Circuits - Medium Duty Isi Pvc Conduit 3M Length , Modular Switches 6A Legrand Or Havells With Ms Box - 6A 1 Way Modular Switch With Plate And Ms Box , Modular 16A Power Sockets 5 Pin With 6A Switch - 16A 5 Pin Modular Socket With 6A Switch , Mcb Distribution Board 8-Way Double Door Surface Mount - Double-Door 8 Way Mcb Db Surface Mount , Led Recessed Downlight 22W Philips Or Havells Warm White - 21W Round Led Panel Warm White 3000K Ip20 , Earthing Pipe Gi 40Mm With Charcoal Salt Treatment - Gi Earth Electrode With Filling 3M , Light Point Wiring And Fixing Labour Concealed Conduit Per Point - Concealed Conduit Wiring Switch Fixing , Power Socket Point Wiring Labour 2.5Sqmm Per Point - Concealed Conduit 2.5Sqmm Wiring , Ac Point Wiring Labour -Dedicated 4Sqmm Circuit - Db To Ac Point Concealed Conduit And Wiring , Db Installation And Testing Labour Mcb Earthing Load Test - Mcb Wiring Earthing Connection Load Testing , Led Light Fixture Installation Fixing Connection Testing - All Light Fittings Fixed Wired And Tested , 600X600mm Vitrified Wood Carpet Area - Matt Wood Look Carpet , Laying Labour Levelling Grouting Cleaning - Skilled Mason Laying Levelling Grouting , Pop Work - Gepsum Board+ Labour , Wall Putty All Walls 2 Coats Asian Paints Or Birla - Asian Paints Trugard Birla White Putty 20Kg , Wall Primer Asian Paints Primer Plus 20L - Asian Paints Wall Primer 20L Pail , Premium Acrylic Emulsion Walls - Asian Paints Royale Matt I , Obd White Distemper Ceiling Asian Paints Tractor Emulsion 20L - Asian Paints Tractor Emulsion 20L , Paint Tools And Consumables Brushes Rollers Masking Plastic - Consumable Painting Tools And Protection Material , Pu Or Nc Polish Wooden Furniture Nc Or Pu Polish 1L Tin - Nc Or Pu Polish 1L Tin Approx 80 Sqft Per Coat , Wall Putty Labour 2 Coats 1000 Sqft Walls - Skilled Painter Putty 2 Coats On Walls , Wall Painting Labour Primer Plus 2 Coats Emulsion - Skilled Painter Brush Or Roller , Ceiling Painting Labour 2 Coats 250 Sqft - Skilled Painter Ceiling Painting , Pu Polish On Furniture Labour Sanding Primer 2 Pu Coats - Sanding Primer 2 Pu Coats Per Sqft , Biometric Unit Fingerprint Rfid - Standalone 500 Users , 12V Smps Power Supply Em Lock 2A Dc Adapter - 2A Dc Adapter For Em Lock Power , Exit Push Button Ss Flush Mount N O Contact With Label - Ss Exit Switch, No Contact With Label , Hydraulic Door Closer Dorma Or Stanley En3 Rated - En3 Rated Hydraulic Overhead Door Closer , Biometric Installation Labour Wiring Programming Testing - Installation Wiring Programming Testing , L Shape Fabric Sofa Cream Or Off White 3 Plus 2 Seater 36D Foam Hardwood Frame - Hardwood Frame, 36D Foam, Cream Linen Fabric , Fabric Sofa Bed Cream Or Off White 2 Seater 36D Foam Hardwood Frame - Hardwood Frame, 36D Foam, Cream Linen Fabric , Sofa Installation And Placement Labour Assembly Positioning Levelling - Assembly, Placement And Levelling , Visitor Chair White Shell Moulded Polypropylene Chrome Legs - Polypropylene Shell Chair, Chrome-Black Legs , Md Executive High Back Chair Leatherette Lumbar Tilt Adjustable - Leatherette, Lumbar, Adjustable Arms & Height, Tilt , Reception Desk Chair Mid Back Mesh Or Fabric Chrome Base - Mesh Or Fabric Mid-Back, Chrome Base, Height Adjust , Zebra Day Night Roller Blind All Windows Motorised Or Manual - Polyester Day-Night Zebra Blind , Aluminium Track And Brackets Blind Per Running Foot - Aluminium Track And Brackets For Blind , Blind Installation Labour Brackets Hanging Adjusting - Fixing Brackets, Hanging, Adjusting Blind Total Quantity : 4562
Contract Date: Ref. Documents Contract Value : ₹ 9.21 Lakh
Boards / Undertakings / PSU No of Bidders 4
Gujarat View Result →
9.
Public Administrative Department #11290947 Technical Bid
Tender for Cartage Of Malva, Silt, Sludge Kankar And Other Disposable Organic Material Etc. All Complete With Labour T&P Including Cartage Of 8 Km. (Chapter No.3 Si.No.8) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (1 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (2 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (3 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Earth Work In Filling In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 8Km. Form The Foundation Trenches Including Royalty@ 9.00 Per Cum. (Chapter No.4 Pwd.Sch.-253(A)+ Cptr No. 3 1 To 8 Km.) , Earth Work In Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Earth Work In Excavation In Foundation In Ordinary Soil Mixed With Moorum Shingle Kankar Requiring The Use Of Special Tools And Plants Such A Pick Axes Subbals Etc. Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Extra For Earth Work In Embankment Mechanically Compacted To 98% Proctor Density Ln Ordinary Soil, Excavation To Be Done Form Of Regular Pits Not Exceeding 0.5Mtr In Depth And Work In Embankment To Be In 20Cm Layer Including Ramming And Dressing Pulverization Surfacing Including Supply Of Labour, T&P, Roller And Water Sprinkle , Back Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50M And Lift Upto 1.5 M Incl. Cost Of All Labor Complete As Per Specifications , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 1.50M To 3M. , Supply & Fixing 3.5Kg And Or As Specified By The Manufacture, Harderner In Trexim Concrete Per Sqm. , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 3.00M To 4.50M. , Cleaning Jungles Including Uprooting Of Trunk Vegetation Grass, Bushes, Wood Trees And Sapling Of Girth Upto 30Cm Measured At A Height Of 1 Meter Above Ground Level And Removal Of Rubbish Upto A Distance Of 50 Meters Out Side The Periphery Of Area Cleared. , Removal Of Silt For Nala/Nali In Liquid Mud Or Faul Position With Special T&P Including Lead 30M And Lift Up To 3.00M Etc. All Complete. (As Per Attached Sanctioned Rate Analysis) , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 4.50M To 6.00M. , Earth Work In Cutting Or In Embankment In Ordinary Soil Excavation To Be In The Form Of A Regular Pits Not Exceeding 0.50M In Depth And Earth Work In Embankment To Be In 20Cm Layers Including Ramming And Dressing The Surface To Required Lavels And Slops And Also Including 1.5 M Lift And 30 M Lead. The Earth In Form Of Cutting (B) To Be Used As Spoil Banks Within 50M Distance As Directed By The Engineer-In-Charge Etc. All Complete. (4-Chapter Si.No.3) , Sand Filling In Plinth Including Supply Of Necessary Quality Of Local Sand From A Distance Not Exceeding 8 Kms From The Site Of Work And Including Watering Dressing Etc.Required For Proper Completion Of Work (Chapter No.4 Si.No.6 ) , Providing And Laying Cement Concrete In 1:5:10 (1 Cement :5 Fine Sand 10 Stone Ballast 40 Mm Gauges) And Curing Complete, Including Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.1) , Providing And Laying Cement Concrete In 1:4:8 (1 Cement:4 Coarse Sand :8 Graded Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors (5-Chapter Sr.No.2) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand :6 Gladed Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.3) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand:6 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors. (5-Chapter Sr.No.5) , Providing And Laying Cement Concrete In 1:2:4 (1 Cement: 2 Coarse Sand :4 Graded Stone Aggregate 40 Mm Noffrinal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors..(5-Chapter Sr.No.6 Si.No..4.1.3) , Providing And Laying Cement Concrete In 1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors. (5-Chapter Sr.No.7) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement -All Work Up To Plinth Level: 1:2:4 (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete , Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Up To Plinth Leuel:1:2:4 In Raft Foundation (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Trp To Plinth Level : 1:1.5:3 (1 Cement:1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) Ch-S Si No- 5,1.2 , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete,Slab Including The Cost Of Centering, Shutterang, Finishing And Excluding Reinforcement - Above Plinth Level Upto Fifth Floor Lable : 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Above Plinth Level Upto Fifth (V) Floor Lable , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Balconies, Shelves, Chajjas, Bands, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Including The Cost Of Centering, Shuttering, Finishing Exlcuding Reinforcement, With 1:1.5:3 In Heavier Beam (1 Cement: 1.5 Coarse Sand(Zone-Lll) : 3 Graded Stone). , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Work Up To Plinth Level (5-Chapter S.I. No.-16) , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Works Above Plinth Level Upto Floor V Level (5-Chapter S.I. No.-16) , Class-150 (Non Modular) Brick Work In 1:6 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.. ( Chapter No. 06 Sr.No. 1) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Foundation And Plinth Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapter No. 06 Sr.No. 2) , Class-150 (Non Modular) Brick Work In 1 :4 Cement And Fine Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Only 80Mm Thick Wall). (Chapter No. 06 Sr.No.3) , Class-150 (Non Modula0 Brick Work In L:3 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Chapter No. 06 Sr.No.4) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. (Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand Mortor In Super Structure Above Plinth Level Upto Floor Five Level For Wall Thickness More Than 12Cm. Including Supply Of All Material, Labour And Tools And Plants Etc. All Complete. {Chapter No.6 Si.No.2+6} , Add Extra To Ltem No. 1 To 4 Above For Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 12Cm And Less. (Chapte No. 06 S.I. No. 2+4) , Add Extra To Ltem No. 1 To 4 Above But In Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 8Cm And Below. (Chapte No. 06 S.I. No. 2+4) , Providing And Laying Damp-Proof Course 40 Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.1} , Providing And Laying Damp-Proof Course 25 Mm Thick With Cement Concrete 1:2.4 (1 Cement : 2 Coarse Sand :4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.2} , Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Vg-10 Of Approved Quality Using 1.7K9 Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With Piece Of Cloth Lightly Soaked In Kerosene Oil.. {Chapter No.07 Si.No.3} , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (A) 35Mm Thick. (Chapter No.9 Si.No.1-9.21.1) , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (2) 30Mm Thick. (Chapter No.9 Si.No.1-9.21.2) , Providing & Fixing 1.00 Mm Thick Decorative High Pressure Laminated Sheet Of Plain/Wood Grain In Gloss/Matt/Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Uality Conforming To Is : 2046 Type S, Including Cost Of Aadhesive Of Approved Quality. , Providing And Fixing Factory Made Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19 Mm X 19 Mm For Styless And 15X15 Mm For Top & Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture. M.S. Frame Covered With 5 Mm Thick Heat Moulded Pvc C Channel Of Size 30 Mm Thickness, 70 Mm Width Out Of Which 50 Mm Shal Be Flat And 20 Mm Shalll Be Tapered In 45 Degree Angle On Both Sides Forming Styless And 5 Mm Thick, 95 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree On The Inner Side To Form Top And Bottom Rail And 115 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered On Both Sides To Form Lock Rail And Lock Rails Shall Be Top, Bottom And Lock Rails Shall Be Provided Both Sides Of The Panel. 10 Mm (5 Mm X 2) Thick, 20 Mm Wide Cross Pvc Sheet Be Provided As Gap Insert For Top Rail & Bottom Rail. Paneling Of 5 Mm Thick Both Side Pvc Sheet To Be Fitted In The M.S. Frame Welded/Sealed To The Styles & Rails With 7 Mm (5 Mm + 2 Mm) Thick X 15 Mm Wide Pvc Sheet Beading On Inner Side, And Joined Together With Solvent Cement Adhesive. An Additional 5 Mm Thick Pvc Strip Of 20 Mm Width Is To Be Stuck On The Interrior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge, Manufacturers Specification & Drawing.30 Mm Thick Pre Laminated Pvc Door Shutters , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Ls: 1868, Minimum Anodic Coating Of Grade Ac 15) , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 5.5 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 8.0 Mm Thickness , Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315 , Having Brand Logo Embossed On The Body/ Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors ,Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor . Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Entineer-In-Charge. With Stainless Steel Cover Plate Minimum 1.25 Mm Thickness. , Providing And Tixing Factory Made Upvc White Colour Casement/ Casement Cum Frxed Glazed Door Comprising Of Upvc Multi-L Chambered Frame. Sash And Mullion (Where Ever Required) Extrlcled Profiles Dl,Ly Reinforced With 1.60 T 0 2 Mm Thick I Galvalized Mild Steel Section Made From Roll Forming Process Of Iequrred Length {Shape & Size According To Upvc Profile), I Ldvc Extruded Glazing Beads Of Appropriate Dimension. Epdi\/L Gasket. Znc Alloy (White Powder Coated) 3D Hrnges And One Handle On Each Side Of Panels Along With Zinc Plated Mild Steel Rnulti Point Locking Having Transmission Gear, Cylinder With Keeps And One Sicle Key, G.L Fasteners 100 X I Mm Size For Fixing Frame To Finished Wall And Necessary Stainless Steel Screws Etc. Profile Of Frame & Sash Shall Be Mitred Cut And Fusion Welded At All Corners, Mullion (If Required) Shall Be Also Fusion Weldecl Including Drilling Of Holes For Fixing Hardwares And Drainage Of Water Etc. Afier Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Of Required Size And Of Approvecl Quality, All Complete As Per Approved Drawing & Cllrection Of Engineer-In-Charge. (Single I Double Glass Panes And Sllicon Sealent Shall Be Paid Separately) Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5% Tolerance In Dlrnension I.E. In Depth & Width Of Profile Shall Be Acceptable Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. Casement Door With 3D Hinges Made Of (Big Series) Frame 67 X 64 Rm & Sasn 67 X 1 10 Mm Both Having Wall Thickness Of 2.3 I 0.2 ^Rr Ancl Single Glazing Bead / Double Glazing Bead Of Lappopiate D.Mersion. (Area Of Door Upto L2 00 Sqm). , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Structural Steel Work In Single Section, Fixed With Or Withoul Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting,Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required Heavy Size Such As Trusses Built , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Apptying A Priming Coat Of Approved Steel Primer.(Chapter No.10 Si.No.4-10.3) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pjpe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\4.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover (Upto 10.00 Sqm).(Chapter No.10 Si.No.4-10.5) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\Il.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X,1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters. Exceeding 10.00 Sqm And Upto 16.80 Sqm/Above In The Area , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc, Complete. Hot Finished Welded Type Tubes , Supply And Fixing Stainless Steel (Grade 304) Ralling Made Of Hollow Tubes, Channels, Plates Etc. Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Steel Nuts And Bolts Complete. I/C Fixing The Ralling With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts Fasteners Etc.). (Chapter No.10 Si. No. 14 New) , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Galvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1 .4 Mm Aperture On Both Sides , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Stainless Steel (Grade 304) Wire Gauze Of 0.5 Mm Dia Wire And 1.4 Mm Aperture On Both Sides , Painting Top Of Roofs With Bitumen Of Approved Quality @ 17Kg Per 10 Sqm Impregasted With A Cost Of Coarse Sand At 60 Codm Per 10 Sgm, Including Cleaning The Slab Surface With Keroseme Oil Complete : With Residual Type Petroleum Bitmen Of Grade Vg-10 , Providing And Laying Integral Cement Based Water Proofing Itreatment Including Preparation Of Surface As Required For Itreatment Of Roofs, Balconies, Terraces Etc Consisting Of Lfollowing Operations: (A) Applying A Slurry Coat Of Neat Cement Lusing 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Lcompound Conforming To Ls. 2645 And Approved By I E Ng Ineer-In-Charge Over The Reinforced Cement Concrete Slab Including Adjoining Walls Lupto 300 Mm Height Including Cleaning The Surface Before Llreatment. B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 125 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 L Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Ofjunctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Lb : 2645 And Approved By Engineer-In-Charge (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix L:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Includlng Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finjshing The Surface With Lrowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge :Wth Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65Mm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 1.00 Mm Thick With Zinc Coating Not Less Than 275 Gm/Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 80 Mm Thick With Zinc Coating Not Less Than 275 Gm/ Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/ M , Providing And Laying Six Courses Water Proofing Teatment With Bitumen Felt Over, Roofs Consisting Of First, Third And Llfth Course Of Blown Bitumen 85/25 Or 9O/15 Conforming To Ls : 702 Applied Hot @ 1.45, L.2O And 1.45 Kg Per Square Metre Of Area Respitively, Second And Fourth Courses Of Roofing Felt Lype 3 Grade I Conforming To Ls : 1322 (Hessian Based Self Flnished ;Itumen Felt) , Sixth And Final Course Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6 Cubic Decimeter Per Sqm Iniluding Preparation Of Surface But Excluding Grading, Complete. , 10 Cm Thick (Average) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa @ 35 Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 (1 Clay: 1 Cow Dung) And Covered With Flat Tile Bricks, Grouted With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finished Neat: With Common Burnt Clay F.P.S.(Non Modular) Brick Tile Of Class Designation 10 , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineerin-Charge) 0 50 Mm (+ 0.05 %) Total Coated Hickness With Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Icrons Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge, The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roollng Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Ridges Plain (500 - 600Mm) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Ls: 12823 Grade Ltype Ll, In Anelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing 12 Mm Thick Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. I\4Arine Plywood Conforming To Ls: 710 , Providing And Fixing Tiled False Ceiling Of Specilled Materials Of Size 595X595 Mm In Lrue Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanlzed @ 120 Grams/ Sqtn, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel Lo Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening For Services Like Diffusers, Grills, Iight Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gl Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gl Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T- Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. Gl Metal Ceiling Lay In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm, And 0.5 Mm Thick With 8 Mm Drop; Made Of G Lsheet Having Galvanizing Of 100 Gms/Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending , Providing And Fixing False Ceiling At All Heights With Integral Densified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595mm Of Approved Texture, Design And Patterns Having Nrc (Noise Reduction Coefficient) Of 0.50 (Minimum) As Per Ls 8225:1987, Light Reflectance Of 85%(Minimum). Non Combustible As Per Bs:476 (Part-4), Fire Performance As Per Bsi476 (Part 6 &7), Humidity Resistance Of 100%, Thermal Conductivity 0.043 W/M K As Per Astm 518:1991,In True Horizontal Level Suspended On Inter- Locking Metal T-Grid Of Hot Dipped Galvanised Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 24X38 Mm Of Length 3000 Mm, Cross - T Of Size 24X32 Mm Of Length 1200 Mm And Secondary Intermediate Cross-T Of Size 24X32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E. 50 Mm Long, I Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Ol Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 460 Mm Center To Center And 40 Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-Incharge. With 15 Mm Thick Tegular Edged Light Weight Calcium Silicate False Ceiling Tiles. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:6 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of 1:4 Cement & Fine Sand (Not Less Than In 1.25 Fm) Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:3 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:4 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 20 Mm Cement Plaster 1:3 (L Cement:3 Coarse Sand) Linished With A Floating Coat Of Neat Cement. , 20Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding Bomm. Ln Girth And Finished Even And Smooth , 6Mm Thick Celling Plaster 1:3 (1 Cement :3 Fine Sand) Cement & Fine Sand In F.M Not Less Than 1.25, 1:3 Including Chipping Of Reinforced Cement Concrete Surface Before Celing Plaster. The Cost Of Including At Material, Labor T&P And Scafolding Etc Complete. (Chapter No.13 Si.No.13) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Morlar1:4 (1 Cement: 4 Coarse Sand) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Including 50Mm Thick Base With Concrete 1:4Rb Complete As Per E/L , Marble Tiles Stone Slabs 18 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With : Marble White Dhungriquality , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With: White Alebeta White Stone , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1: 4 (1 Cement: 4 Coarse Sand) : 25 Mm Thick , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm (Average) Thick Base Of Cement Moftar 1:5 (L Cement: 5 Coarse Sand)With Joints Finished Flush.Red Sand Stone , Prividing & Laying Ceramic Non Skid Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming Tq Ls : 15622 Of Approved Make In Colours Such As White, Lvory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Ioints With White Cement And Matching Pigment Etc., Complete. , Providing & Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Ls : 15622 (Thickness To Be Specified By The Manufacturer )Of Approved Make In Atl Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-Incharge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Morta|L:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 33Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Laying Vitrified Tiles 500X500mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providing And Laying Vitrified Tiles 600X600mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providlng And Laying Polished Granite Jet Black Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge.{Chapter No.14 Si.No.27} , Stone Work (Machine Cut Edges) For Wall Llning Etc. (Veneer Work) Upto10 Metre Height, Backing Filled With A Grout Of Avercge 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Polnting In White Cement Mortar 1:2 (1 White Cement R 2 Stone Dust) Wlth An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Plns Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Flne Dressed With Rough Backing. 30 Mm Thick , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. Including Curing The Cost Of All Material, Labour, T&P Etc. Complete. (Chapter No.15 Si.No.1) , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Ofwork. , Finishing Walls With Water Proofing Cement Paint Of Required Shade : New Work (Two Or More Coats Applied @ 3.84 Kg/10 Sqm) Supply Of All Labour Material And T&P Requlred For Proper Completion Of Work. , Finishing Walls With Textured Exterior Paint Of Required Shade New Work (Two Or More Coats Applied @ 328 Ll Lo Sqm) Over And Including Priming Coat Of Exterior Primer Applied @ 2.20K9/10 Sqm Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade ; New Work (Two Or More Coat Applied @ 1.67 Llth) Sqm Over And Including Priming Coat Ofexterior Primer Applied @ 2 20 Kg/10 Sqm) Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/L0 Sqm Over An Under Coat Of Primer Applled @ O.B0 Ltr/10 Sqm Of Approved Brand And Manufacture. Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacturb Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Paint Of The Two Coat Over Primer Coat Wood Surface And Etc. All Complete.(15-Chapter Si.No.8+10+11) , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Upto 10 Cm In Width , Applying Priming Coat: With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood) Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Of Work , Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade Two Or More Coats On New Work Includlng Cost Of All Materials, Labour T&P Etc. Required For Proper Completion Of Work Wood And Steel , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..One Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..Two Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Sudace Smooth Including Necessary Repairs To Scratches Etc. Complete. , Distempering With Lst Quality Acrylic Distember (Ready Mix) Having Voc Content Less Than 50 Grams/ Litre Of Approved Brand And Manufacture To Give An Even Shade:Old Work (One Or More Coats) , White Washing Wth Lime On Undecorated Wall Surface (One Coat) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , White Washing Wth Lime On Undecorated Wall Surface (Three Or More Coats) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , Colour Washing Such As Green, Blue And Other Coloures Or Buff To Give An Even Shade New Work Colour Washing (Two Coats) With A Base Coat Of White Washing With Limes Including Cost Of All T&P Other Complete Work. , Removing White Or Colour Wash By Scrapping And Sand Papering And Pteparing The Surface Smooth Including Necessary Repairs To Scratches Etc Complete , Demolishing Cement Concrete Manually Including Disposal Of Materialwithin 50 Metres Lead , Dismantling Reinforced Cement Concrete Or Reinforced Brick Work Including Stacking Of Materials As Directed By E/Ic With In A Distance Of 60 Meters (200 Feet). (17-Chapter Pwd. No.694) , Demolishing R.B. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-Incharqe. , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge In Cement Mortar. (17-Chapter Si.No.6) , Demolishing Stone Rubble Masonry Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Eng;Neer-In-Charge : Ln Lime Mortar , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead Of Area 3 Sq. Metres And Below , Dismantling Steel Work In Single Sections Including Dismembering And Stacking Within 50 Metres Lead In: R.S. Joists , Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. (17-Chapter Si.No.16) , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Wlthin 50 Metres Lead. , Dismantling Of Old Interlocking Tiles Pavement Including Staking Of Serviceable Material And Disposal Of Unserviceable Material Within Lead Of 50M As Per Direction Of Engineer In Charge. (Ns) , Random Rubble Masonry 1:6 (1 Cement: 6 Coarse Sand), With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size).Upto Plinth Level With , Random Rubble Masonry 1:6 (1 Cement : 6 Coarse Sand), With Hard Stone In Superstructure Above Plinth Level And Upto Floor Five Level, Including Leveling Up With Cement Concrete 1:6:12 (L Cement:6 Coarse Sand:12 Graded Stone Aggregaie 20 Mm Nominal Size) At Window Sills, Ceiling Level And The Like , 30 Mm Red Sand Stone Sun-Shade (Chisel-Dressed) Supported On Red Sand Stone Brackets, Fixed In Walls With Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Finishing Complete. , Providing And Fixing Red Sand Stone Jali 40 Mm Thick Throughout In Cement Mortar 1R3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc , Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Fine Dressed With Rough Backing. 30 Mm Thick (Chapter No.18 Si.No.7) , Supply And Fixing 500 Liter Pvc. Sintex Water Tank Etc. All Complete. (19-Chapter Sr.No.2(C)) , Laying Brick Soling Layer On Prepared Sub-Grade With Brick On End Edging According To Lines, Graded And Cross-Section Shown On The Drawing Filling Joints With Sand And Earth, Spreading 25 Mm Thick Layer Of Earth Over Brick Soling, Watering And Rolliing The Same With Three Wheel Road Roller 80-100 Kn As Per Technical Specification Clause 412 , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Constuction Of Un-Reinforced, Plain Cement Concrete Avement Thickness As Per Disign, Over A Prepared Sub Base With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M-30 (Grade), Coarse And Fine Aggregate Conforming To Is 383, Maximum Size Of Coarse Aggregate Not Exeeding 25Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Acapacity And Apporopriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork (Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film Wedges, Steel Plates Including Levelling The Formwork As Per Drawing), Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continous Aperation Including Provision Of Contraction, Expansion, Construction And Constructionl Joints, Applying Debonding Strips, Primer, Sealant, Dowel Bars, Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14 Days, Curing Comound (Where Apecified) And Water Finishing To Lines And Grade As Per Drawing And Technical And Technical Sepcification Clause 1501. (For Agra). (Chapter No.20 Si.No.12) , Construction Of Un-Reinforced, Plain Cement Concrete Pavement Over A Prepared Sub Base With Approve Grade Cement @ 400 Kg Per Cum, Coarse And Fine Aggregate Conforming To Ls 383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Batching And Mixing Plant As Per Approved Mix Design, Transported To Site, Laid With A Fixed Form Or Slip Form Paver, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints, Joint Filler, Separation Membrane, Sealant Prim Er, Joint Sealant, Debonding Strip, Admixtures As Approved, Curing Compound, Finishing To Lines And Grades As Per Drawing For Agra , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work.80 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Coloured) , Re-Laying Of I Shaped Precast Interlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50Kg) Including 25Mm Thick Loacal Sand Base Levelling And Ressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Comlete Work. Including Vat (Chapter No.20 Si.No.19 New Item) , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe. (Lnternal Work - Exposed On Wall) 32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 40Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 50Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 15 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 20 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 25 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 32 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 40 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 62.50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 75 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 100 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 150 Mm Nonrinal Dia Pipes , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 15 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 20 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 25 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 32 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 40 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 50 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 15 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 20 Mm Dia Nominal Bore , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 60X60x75 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 90X90x100 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 120X120x100 Cm Lnside , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Ls : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Lsl Marked White Solid Plastic Seat And Lid , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Two Urinal Basins With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Three Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Four Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require: (White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C. P. Brass Pillar Taps) {Chapter No.24 Si.No.5A} , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Single 15 Mm C.P. Brass Pillar Tap , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pajr Of 15 Mm C.P. Brass Pillar Taps , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm C.P. Brass Pillartap , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.6A) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350 Mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pi Pe, Spreaders With Unions And Clamps (All In C.P. Brass) With Waste Fitting As Per Ls:2556, C.L. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittlngs And Cutting And Making Good The Walls And Floors Wherever Requlred:Range Of Two Half Stall Urinals With 5 Litre Pvc. Automatic Flushing Cistern , Constructing Brick Masonary Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 455X610mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (A) Inside Dimensions 455X610mm And 45Cm Deep For Single Pipe Line : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.6A) , Constructing Brick Massonry Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 600X850mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (C) Inside Dimensions 600X850mm And 45Cm Deep For Pipe Line With Three Or More Inlets : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.8C) , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) Hindi Letters , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) English Letters , Reinforced Cement Concrete M15 Grade Boundary Pillars/ Wheel Guard Of Standard Design As Per Irc:25-1967, Fixed In Position Including Finishing And Lettering But Excluding Painting , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.2 Metre High , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.8 Metre High , Deduction Of Cost Brick/Bats. (Chapter No.1 Sr.No.2(C)) , Deduction Cost Of Material Old Workable Bricks Etc. All Complete. , Road Delinator Delinealor Supply & Fixing Of M S Delineator Made Of L\Lild Steel With Pllre Polyester Powder Coating With The Minimum Thickness Of Powder Coating Of Not Less Than 40 Micron For Prolectlon Against Corlosion The Surface Should Be Concealed So That There Sholrld Not Be Any Exposed Surface Wilhout Powder Coating. Alternatively, These Metal Guide Poles Can Be Concealed With Thermoplastic Body. The Posts Shall Have Lan Ellipsoidal Or Circular Design Wilh The Height Of The Pole Shall Be 800 To 900 Mm Above The Ground With About 200 To 300 Mm Base Which Can Be Anchored Onto The Ground Mild Steel Guide Poles Shall Conform To Type Xl Sheeting Specifications As Per Lrc67 And Ast Ii D4956 Which Would Ensure To Obtainl Clear Visibility Of The Road Alignment During Nighl Time. The Relro Reflective Sheeting Shall Be Tested For Acertificale Of Having The Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Iiner Removal, Adhesion,Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdooa Weathering And Ils Having Passed These Tests Shall Be Obta Ned From Lnlernational/Government Laboratory / Lnslitute By The Manufacturer Of The Sheeinq And In Case The Cerliflcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condillon Within 3 Years Of Launching Of Product By The Manufaclure In Abroad. Alternatively, A Certillcate Conforming To Astlvl Specification (D4956 09) On Adficial Accelerated Weatherlng Requirements From A Reputed Laboratory In Lndia Can Be Accepted providing Sionally. Ln Such A Siluation, The Employer / Clienl, If So Desires, Collld Seek For A Performance Guarantee Which Would Be Released Alter Receipt Of Certiflcate Meeting The Requ Rement Of Three Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Report Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour. T&P, Transportation, Installation And Incidentals All Complete As Per D Recllon Of The Engineerincharge , Road Marking With Hot Applied Thermoplastic Compound With Reflectrosing Glass Beads On Bituminous Surface. Providing & Laying Of Hot Applied Thermoplastic Compound 2.5Mm Thick Including Reflecto Rising Glass Beads @ 250Gm/Sqm. Area, Thickness Of 2.5Mm Is Exclusive Of Surface Applied Glass, Beads As Per I.R.C. 35. The Finish Surface To Be Level Uniform And Free Form Steaks And Holes Composition Of Thermoplastic Material Shall Be As Per Table 800-3 Of Clause 803 Of Morth Including Cost Of Work As Per Direction E/Ic. (Chapter-28 Si.No.2) , Road Marking With Hot Appliod Ths.Moplastic Compound With Roflsctorlsing Glass Boads On Bituminous Surface. (Ropoated / Tranvers Bar) Providing And Laying Of Hot Applied Thermoplastic Compound 5 Mm Thick Lncludlng Reflectorising Glass Beads 0) 5Oo Gms Per Sqm Area, Thickness Of 5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35-2015 The Llnished Surface To Be Level, Uniform And Free From Streaks And Holes , 6M Span Over Head Cantilever Structure With 300 Dia M S One Vertical Post Supply, Fxing & Erection Of Built Up Canllever Structure 6 M Span Comprising Of One Verllcal Posts Of 6.00 I!4 Helght Made Up Of 300 Mm Nb Heavy Class Ms Pipe As Verllcal Member Welded With 10 Mm I\,4S Plate At Top & 12 Mm M S Plate At Bottom. The Horizontal Truss Shall Comprise Of 50 Mm Dia Heavy Class M.S. Pipe And 40 Mm Dia Heavy M S Pipe As Bracing & 10 Mm Ms Plate At Bottom For Llxing To Vertical Post As Per Structure Design & Drawing Wilh One Of Steel Primer And Two Coats Of Synthetic Enamel Planl. The Work Includes Constrlrction Of Reinforced Cement Concrete Foundation Of Size 0.90X0.90X1 50 M Of Required Depth As Per Site Conditlon For Built Up Structure Including Earlh Work In Excavation 100 Mm Thick Lean Concrete In 113:6 Cement Coarse Sand And 40 Mm Gauge Stone Ballast And Reinforced Cement Concrete M25 Grade Concrete Including Supply And Fixing Of 25 Mm Dia Foundalion Bolts 600 Mm Long As Per Provision Of Structure Design Includlng Cost Of Reinforcemenl & Shuttering. The Lateral Vertical Clearances And Complete. Nstallaton Work Shall Be As Per Relevanl Clauses Of Mort&H Speciflcation Section 8Oo And Irc 67 2012 Complete In All Respect The Raies Shall Include Cost Of Deslgn Fabricalion, Supply, Kansportalion, Local Shifting Erection Of Signage Skucture Using Crane, Inclusive Of All Taxes Etc. All T&P Machine, Malerial And Labour Requiled For Proper Completion Of Work As Per Direclion Of Engineer-Ln-Charge. , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilhout Shank) , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilh Shank) , Flexible Median Marksr As Per Irc 79:2019: Flexible Lmedian N4arker (Flv4nl) Should Be Used For Improving Medlan Visib Lity Dlrring Dark Hours. , Use Of L/Edian ]Varker Provides Safely Againsl Colision Happening Wilh Med Ans During N Ght Lime , Or Sevete Weather Flexib E L\.4Edian Markers Shall Be Provided With Fluorescenl Yellow Colour Retro-Refleci Ve Sheeting Type Xl As Per Irc:87. Flexible Lt4edian Lmarker Shall Be Ol Lough, High Impact Resistant, Lnieclion Molded, Lhermoplastic Body With Propery Of Flexibility Io Provide High Durabilityand U Shape Structure Having Rebound / Bollnce Back Properly. The Sheeting Shall Be Of Type Xl Conforming To Lrcl67 And Ii Should Be On Both The Faces Whereby Providing Maximum Refleclivity At L,Anger Distances With Adequate Durabllity. The Logo Of The Manufacturer Shall Be Embossed On Either Side Of The Body During The Lnjection Molding Process. Fi\4M Shall Be Fixed By A Combination Bf Epoxy Adhesive And Grouting/ Drilling On Concrete Medians Or Property Conslructed Solid Medians Heighl: The Marker Height Shall Be A Minimum Of 180 Mm Width 120 Mm & Body Thickness: 6.5 Mm. The Shanks Shall Not Be Less Lhan 20 Mm And Depth Shall Not Be Less Than 30 Mm Reflective Area: Shall Not Be Less Than G0 Cm Square . Proof Of Lhe Same Report Shall Be Uploaded Which Quollng Lender. The Body Of Fn,4[,4 Shall Bounce Back To Ils Origlnal Position Of Afier 750 Number Of Hits Using Pendulum Of 1.8 Kg Conforming 40 Astm D256 Adhesion Between The Body And Outer Casing Body Of Fmi\4 Shall With Stand 50 Kg I Tensile Loads Conforming To Astm D63b Method. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer-Ln-Charge. , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Over 10 Cm. In Width , Linear Dstinoator Systsm (Lds) Supply & Fixing Of Linear Delineator System (Lds) Panels Made Of Micro Prismatic Retro Reflective Sheeting Type Xl Duly Laminated On Thin Aluminium Foil To A Unique Corrugated Shape To Provide Retro Reflection Across Wide Range Of Observaiions And External Angles. Eatch Lds Panel Should Be Of Nominal Lenglh Of 33 Inch And Each Ridge Shall Be Approximately 0.34 Inch High Each Lds Panel Is To Be Firmly Fixed On Existing Concrete/Brick Work With 16 Nos Fastner/ Screw , Retro-Roflectivesheeting Type-Lv With 4 Mm Thick Acm Single Side Providing & Flxing Of Reflective Signs With A Corrosion Resistant 4 Mm Thick Wlth 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Lace To Be Iully Covered With Hlgh Lntenslty Prlsmatic Sheetlng Type Lv As Per Irc-6712012 Relro Refleclive Sheeling With Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Elc Shollld Be As Per Morth Speciflcation No Bo1.3.7 .The Sheelng Shall Have A Pressure - Sensltive Adhesive Of The Aggressive - Tack Type Requiring No Heat , Solvent Other Preparation For Adhesion 10 A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acim (Aluminium Composite Materials) Shall Be Flxed On The Back Frame Nis Angle Wiih Riveting. Micro Prismalic Type Lv Retro Rellective Sheeting Conilrming 1O Astm 04956-09 Shall Be Pressure Lixed. The Retro Reflective Sheeting Shall Be Tested For A Cerlillcate Of Having The Sheeting Tesled For Coetllcient Of Retro Refleclion, Dayume Colour And Luminance, Shrinkage, Flexibilily, Liner Iemoval, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed Lhese Lesls Shall Be Obtained From Lnlemational/Government Laboratory/ Lnstitute By The Manufacture. Of The Sheetng And In Case The Certiflcate Is Oblalned From International Condilion, T Should Also Be Obtained From Lndian Condilion Within 3 Years Of Launching Of Producl By The Manufactllre In Abroad. Alternalively, A Cerliilcate Conforming To Astm Specification (D 4956-09) On Artiilcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, Lhe Employer/Client, If So Desires, Could Seek For A Petlotrnance Guarantee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirement Of Lhree Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo.T Shall Be Uploaded Whlch Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Lransportation, Installation And Lncidentals All Complete As Per Direction Of The Eng Neer-In-Charge. , Retro-Reflectivesheeting Type Iv With 4 Mm Thjck Acm Double Side: Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Lhlck With 0.4 To 0.5 Mm Both Side Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Tntensity Prismaiic Sheeling Type Lv As Per Irc-67:2012 Retro Reflective Sheeting With Back Frame Ms Angle Of 35X35x5 Mm Legends Letters , Numerals And Borders Elc Should Be As Per Morth Specification No801.3.7 The Sheeting Shall Have A Pressure - Sensitive Adhesive Of The Aggressive - Tack Type Requiring No Heai, Solvent Olher Preparation For Adhesion To A Smooth Clean Surface, Ln A Manner Recommended By The Sheeling Manufacturer. The Acn,4 (Aluminium Cornposite L\,4Aterials) Shall Be Ilxed On The Back Frame Ms Angle With Nveling. Micro Prismatic Type Lv Retro Refleclive Sheeting Conflrming Io Astm D4956-09 Shall Be Pressure Llxed. The Reko Reflective Sheeling Shall Be Tesled For A Cedificate Of Having The Sheeting Tested For Coemcient Oi Reko Reflection, Daytime Colour And Luminance, Shrinkage Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdoor Weatherlng And Its Having Passed These Tests Shall Be Obtained From Lnternallonal/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeting And In Case The Certificale Is Oblained From International Condition It Should Also Be Obta Ned From Lndian Condilion Wilhin 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certilicate Conforming 10 Astm Speciflcatlon (0 4958-09) On Aatiflclal Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepled Provisionally. Ln Sllch A Situation, The Employer/Client If So Desires, Could Seek For A Performance Guarantee Which Would Be Released Afler Receipl Of Cerlillcate Meeting The Requirement Of Lhree Years Outdoor Weathering Of The Sheeling As Per Irc 67I2012 & Proof Of The Same Repofl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installalion And Incidentals All Cornplete As Per Dlreclion Of The Engineer-In-Charge , Retro-Refle.Ctivesheeting Type-Xl With 4 Mm Thick Acm Single Side Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Thick With 0.4 To 0.5 Mm Both Slde Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Lntensity Prismatlc Sheeting Type Lv As Pet Irc-67:2012 Reko Reflective Sheeling With Back Frame L\,4S Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per L\Lorth Specification No_ 801.3.7 The Sheeting Shal Have A Pressure - Sensitive Adhesive Of The Aggressive Tack Type Requiring No Heal Solvent Other Preparation For Adhesion To A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acm (Alllminium Composite L\,4Aterlals) Shall Be Fixed On The Back Frame Ms Angle With Riveting. Micro Prismatic Type Lv Retro Reflective Sheeung Conflrming To Astlvl D4956-09 Shall Be Pressure Fixed. The Relro Reflective Sheeting Shall Be Tested For A Cefiilicate Of Having The Sheeting Tested For Coeificient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Iungus Resistance. 3 Years Outdoor Weathering And Lts Having Passed These Tests Shall Be Obtained From Lnlernational/Government Laboraiory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cefiificate Ls Obtained From Lnternational Condition. It Should Also Be Oblalned From Lndian Condition Wilhin 3 Years Of Launching Of Producl By The Manufacture In Abroad. Alternatively, A Certificate Conforming To Astii Speciflcation (D 4S5b-09) On Adiflcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Prcvisionally. Ln Such A Siluation, The Employer/Client, If So Desires, Could Seek For A Performance Guaranlee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirernent Of Three Years Outdoor Weathering Of Lhe Sheeting As Per Irc 67:2012 & Prooi Of The Same Reporl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpoftalion, Installation And Incldentals All Complete As Per Direction Oi The Engineer-Ln-Charge , Retro-Reflectlveshoeting Type-Xl With 4 Mm Thick Acm Double Side Providing & Rlxing Of Reflective Signs With A Colrosion Resistanl 4 Mm Thick With 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Face Lo Be Iully Covered With High Lntensity Prismatic Sheeling Type Lv As Per Irc-67:2012 Relro Retlective Sheeting Wlth Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specification No_ Bo1.3.7 .The Sheeting Shall Have A Pressure - Sensilive Adhesive Of The Aggressive - Tack Type Requiring No Heat, Solvent Other Preparation For Adhesion Lo A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer, The Acn,4 (Aluminlum Composite Materlals) Shall Be Fixed On The Back Fiame Ms Angle With Riveting. Micro Prismalic Type Lv Retro Reflective Sheeting Conflrming To Astm D4956 09 Shall Be Pressure Fixed. The Relro Refleclive Sheeting Shall Be Tested For A Ce(Iilcate Of Having The Sheeting Tested For Coefllcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Funqus Resistance. 3 Years Outdoor Weathering And Its Having Passed These Tests Shal Be Oblained From Lnternationa /Governmenl Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case Lhe Certillcate Ls Obtained From Internalional Condition, It Should Also Be Obtained From Lndian Condition Within 3 Years Of Launching Of Product By The Manufacture In Abroad Alternalively, A Ce(Iilcate Conforming To Astm Specification (D 4956-09) On Artiflcial Accelerated Wealhering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Sltuation, The Employer/Cllent, If So Deslres Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cedillcate Meeling The Requirement Of Lhree Years Outdoor Weathering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo( Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpo.Tation, Installation And Incidentals All Complete As Per Direction Of The Engineer-In-Charge , Bollard (Single Sido) Supply & Fixing Of Bollard Made(Single Side) Out Of2mm Thick Aluminium Sheet Face Lo Be Covered With High Intensity Prismatic Grade Type Lv Sheeting , Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specillcation No-801.3.7 . Welded Poly Shaped To Make It Monolithic Pillar Size 12Oo Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Is Fully Cover (Size Of Foundation 0.45X0.45X0.60M) , Bollard (Doublo Side) Supply 8, Fixing Of Bollad Made (Double Side) Out Of 2Mm Thick Aluminium Sheet Face To Be Covered With High Intensity Prismatic Grade Iype Lv Sheeting Legends , Letters , Numerals And Borders Etc Should Be As Per Morih Specification No-801.3.7. Welded Poly Shaped To Make It Monolithic Pillar Size 1200 Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Ls Fully Cover. (Size Of Foundalion 0.45X0.45X0.60M) , Solar Power Road Marker (Solar Studs) The Solar Studs Shalt Be Made Of Aluminium Alloy And Poly Carbonate Material Which Shall Be Absolutely Weather Resistant And Strong Enough To Support A Load Of 13,635 Kg Tested In Accordance With Ast[4 D4280. Lts Co]Our May Be While . Red , Yellow , Green Or Blue Or Combination As Directed By The Engineer . Its Water Resislance Shall Meet Lhe Requiremenls Of Lp 65 In Accordance Wilh 15:12063:1987 Category 2 For Protection Againsl Water Ingress The Dimensions Of Solar Sluds Shall Not Be Less Than 100 Mm X 100 Mm X 10 Mm Ltshall Have Super Bright Leds So As To Provide Long Visibillty From A Distance Of More Than B0o M. Lts Flashing Rate Shall Not Be Less Than1 Hz Lts Should Be Able To Glve The Prescribed Performance In The Temperrature Range Of - 40C To +55C Lts Life Shall Be Not Less Than 3 Years. The Rate Shall Include All Materials, Labour, Equipments, Fabrication, Transportation, Erecuon, Installation And Incidentals All Complete As Per Direclion Of The Englneer-In-Charge , Cast-Ln-Situ Cement Concreto M 20 Kerb Construction Of Cement Concrete Kerb With Top And Bottom Width 115 And 165 Mm Respectively, 250 Mm High In M 20 Grade Plain Cement Concrete On M-10 Grade Foundation 150 Mm Thick, Foundation Having 50 Mm Projection Beyond Kerb Stone, Kerb Stone Laid With Kerb Laying Machine, Foundation Concrete Tad Manually, Alt Complete As Per Clause 408. , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 90 Cm Equllateral Tringle With Dif,Lnitation Plate Size (20Cm X 60Cm , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Eqlrilateral Trinqle With Difflnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Circular With Difflnltation Plale (20Cm X 60Cm) . , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government B0 Mm X 60 Mm Reclangu annual repair With Difllnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Mm X 45 Mm Rectangular With Difllnitation Plale (2Ocm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm X 60 Cm Square With Difflnitation Plate (20Cm X 60Crn) , Direction And Place Identification Signs Up To 0.90 Sqm Size Board Providing And Erecting Directlon And Place Identification Retro Reflectorised S Gn As Per Irc-67 Made Of High Intensily G.Ade Sheeting The Relro Reflective Sheelng Shall Be Tested For A Certiicate Of Having The Sheeling Tested For Coefficient Of Reko Reflection. Daytime Colour And Luminance, Shrinkage, Flexibllity. Liner Removal Adhesion, Impacl Resislance, Specula. Gloss And Iungus Resistance, 3 Years Ouldoor Weathering And Its Having Passed These Tesls Shall Be Obtalned From Lnternational/Govemment Laboraiory/ Lnslitule By The Manufacturer Of The Sheeting And In Case The Certillcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condltion Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certiflcate Confonning To Ast[4 Specification (D4956 09) On Art Ficial Ccelerated Wealhering Requirements Faom A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer I Client, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Lhree Years Olrtdoor Weathering Of Lhe Sheeting As Per Irc 67 2012. Legends , Letters , Nurrerals And Borders Etc Should Be As Per Imorth Speciilcation No-801.3.7 Sheet Fixed Over Aluminium Sheetinq .2 Mm Thick Wilh Area Not Exceeding 0.9 Sqm.Supported On A Mild Steel Single Angle Iron Post 75X75x6 Mm Flrmly Fixed Lo The Ground By Rneans Of Property Designed Foundalion With N,4-15 Grade Cement Concrete 45X45x60 Cm.,Below Ground Lcvcl As Pcr Approvcd D.Awing. Complete. , Tree Plats Supply & Fixing Of Retro Reflective Tree Plate Having Size 15Cm X15cm, Conjisiing Type Xl Retro Reflective Sheeting Lixed Over 1.50 Mm Thick Aluminiu; Sh;Et Including Labour, Material T&P Etc For Proper Completion Of The Work. The Rate Shall Include All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 1000 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 750 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 500 Mm Helght , Aluminum-Backed Flexible Prismatic Sheeting Shall Be Made Of Yellow Colored Flexible Prismallc Sheeting With Non-Rnetallic Prismatc Lens Formed In A Lransparent, Synthelic Resin As Retro Leflective Elements. This Llexible Prlsmatic Sheeting Shall Have Black And Yellow Stripes With Aluminum Backed Flexible Prismatic Type Vl Sheeting Conforming To Astm: D4956 . Specifications And Standards Of Coefllcient Of Relro Refleclivity, Flexibility And Lmpact Resislance Applicable For Reboundable Devices This Flexible Prismatic Sheeting Shall Have Screen Printed Arrow/Slant Line Pattern In Black Colour In A Continuous Roll Format. Wldlh Of Object Marker Shall Be 300 Mm. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer In-Charge , 2.40 M Span Over Head Cantilever Structure With 150 Die Ms One Vertical Post (Double Side Retro Reflective Sign Boards) Supply, Fixing & Eraction Of Built Up Cantilever Structure 240 M Span O.PiiIng Oi One Ve.Tical Posts Of 7 30 N4 Heighl Made Up Of 150 Mm Nb Medium Class T\4S Pipe As Vertical Memberwelded With 10 Mm Ms Plate At Top & Lo Mm Lvls Plate At Boltom. Flxing To Vertical Post As Per Structllre Design & Drawing Wiih One Of Steel Primer And Two Coats Of Synthetic Enamel Plant And The R;Tro Reflective Sheetinq Shall Be Tesled For A Certifcale Of Having The Sheeting Tested Fo. Coemcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Olltdoor Wealhering And Ils Having Passed These Lests Shall Be Obtained From Lnternational/Government Laboraiory/ Lnstitute By The Manufactllrer Of The Sheeting And In Case The Certificate Is Obtained From Internatlonal Condilion, It Should Also Be Obtained From Lndian Condition Wilhin 3 Years Of Launchlng Of Product By The Manufacture In Abroad. Alternatively, A Cedificate Confonning Io Astm Speciflcation (0 4956 09) On Artificial Accelerated Weathering Reqllirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. N Such A Sltuation, The Employer / Client, If So Desiaes. Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerllllcate Meeting The Requirement Of Three Years Outdoor Weathering Ol Lne Sheeling As Pel Irc 67 2012 . Legenos . ,Etters . Numerdls And Borders Elc Sholllo Be Asperl\,4Orlh Specif,Calion No_801 37 The Work Includes Construction Of Reinforced Cement Concrete Foundation Of Size 0.60X0.60X1.20 M Of Required Depth As Per Site Condilion For Built Up Struclure Lncluding Earth Work In Excavation 100 Mm Thick Lean Concrete Ln 1:3:6 Cemenl Coarse Sand And 40 Mm Gauge Stone Ballast. Reinforced Cement Concrete Lm25 Includlng Supply And Fixing Of 25 Mm Dla Foundalion Bolts 600 Mm Long As Per Provision Of Slructure Design Including Cost Ot Reinforcement & Shuttering. The Lateral Vertical Clearances And Complete. Lnstallation Work Shall Be As Per Relevant Clauses Of Mort&H Specitlcation Seclion 800 And Irc 67 2012 Complete In A I Respect The Rates Shall Inclucle Cosl Ol Design Fabrication, Supply, Lransporlalion, Local Shifling Erection Of Signage Slructure Using Crane, Incluslve Of All Taxes Etc All T&P Machine, Material And Labout Required For Proper Completion Of Work As Per Direction Of Engineer-In-Charge , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 30X90 Cm (Lefrright) Object Hazard , Retro Rellectorisod Signs (Stajnless Steel Frame And Post With One Side Sings) Supply & Fixing Of Reflective Sign Board (Single Side) Of Size 1.50X1.20 M Retro Refleclive Sheeling Of Hip Grade Type-Lv, Lhe Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick, Acm Sheel Of Standard Make As Per Morth Specificaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Cm Cement Conclete Foundauon. The Stainless Steeljoint Welding Of Ss Pipe Work Shall Be Band And Grinder Property Including Bufflng So An To Give Uniiorm Shining At Weded Joinls. The Retro Reflective Sheellng Shall Be Lested For A Certiflcate Of Having Ihe Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Cololrr And Luminance, Shrinkage, Flexibility, Linet Removal, Adheslon, Impact Resistance, Specular Qloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Governmenl Laboratory/ Institute By Lhe Manufacturer Of The Sheeting And Ln Case The Cedillcate Is Obtained From Inlernational Condition, It Should Also Be Oblained From Lndian Condition Within 3 Years Of Launching Of Procluct By The Manufacture In Abroad Allernatively. A Certiflcate Confolrnlng To Astm Specilicalion (D 4956-09) On Artiflcial Acceleraled Weathenng Requirements From A Reputed Laboratory Ln Lndia Can Be Accepled Provislonally. Ln Slrch A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificale Meeting The Requirement Of Three Years Ouldoor Weathering Of The Sheeting As Per Irc 67I2012. Legends , Letters , Numerals And Borders Elc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Governmenl Repod Shall Be Uploaded While Quoting Tender. , Retro Reflectorised Signs (Stainless Steel Frame And Post With Both Side Sings) Slrpply & Fixing Of Reflecllve Sign Board (Sing E Side) Of Size 1.50X1.20 M Retro Reflective Sheeting Of Hip Grade Type-Lv, The Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick Acni Sheet Of Standard Make As Per Morth Speciilcaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Crn Cement Concrele Foundation The Stainless Steelioint Welding Of Ss Pipe Work Shallbe Band And Grinder Propefiy Including Butting So An To Give Uniform Shining At Weded Joints. The Relro Reflective Sheeting Sha I Be Tested For A Certificale Of Having The Sheeling Tested For Coefficient Of Retro Reflection Daytime Colour And Luminance, Shrinkage. Flexibiity, Llner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Reslstance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeling And Ln Case The Certiflcate Is Obtained Lrom Lnternational Condition, It Should Also Be Obtained From Lndian Condition Wlthin 3 Years Of Launching Of Product By The Manufacture In Abroad. Allernatively, A Cerlificate Conforming To Astm Specificalion (0 4956.09) On Artificial Accelerated Weathering Requlremenls From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificate Meeting The Requirement Of Three Years Outdoor Weather Ng Of The Sheeting As Per Irc 67I2012. Legends. Letters, Numerals And Borders Etc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Government Report Shall Be Uploaded Whlle Quoting Lender. , Type - A, W : Metal Beam Crash Barrier Providing And Erecting A W Metal Beam Crash Barrler Comprlsing Of 3 Mm Lhick Coffugated Sheet Melal Beam Ral 70 Cm Above Road/Ground Level Flxed On Ismc Series Channel Vertical Posl, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High. 1.1 M Below Grolnd/Road Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fltlings To Conform To Lsi1367 And 15:1364. Metal Beam Rail To Be Fixed On The Vedical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810 , Type - B, Thrie : Metal Beam Crash Barrier Providing And Erecting A Thrie Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Melal Beam Rail,85 Cm Above Road/Ground Level, Fixed On Isi\Ic Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Cenlre To Cenke, 2 M High With 1.15 M Below Ground Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fittings To Conform Lo Lsl1367 And Ls:1364 Metal Beam Rail 10 Be Fixed On The Verlical Post With A Space Of Channel Seclion 150 X 75 X 5 Mm, 546 Mm Long Complete As Per Clause 810 , Anti-Termite Treatment The Soil Along With External Perimeter Of Building At The Rate Of 2.5 Litres Of Emulsion Per Square Metre Of The Perimeter Wall {Chapter No.08 Si.No.5} , Anti-Termite Treatment Of The Bottom And Sides Of Excavation At The Rate Of 5Litres Of Emulsion Per Square Metre Of Surface Area {Chapter No.08 Si.No.1} , Anti-Termite Treatment Of The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface{Chapter No.08 Si.No.3} , Anti-Termite Treatment Of The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface {Chapter No.08 Si.No.4} , Anti-Termite Treatment Of The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (Area Of The Sub Structure In Contact With Backfill To Be Measured) {Chapter No.08 Si.No.2} , Treatment Of Existing Masonry Using Chemical Emulsion @ One Litre Per Hole At 300 Mm Interval Including Drilling Holes At 45 Degree And Plugging Them With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To The Full Depth Of The Hole : With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration {Chapter No.08 Si.No.6-2.35.4.1} , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration {Chapter No.08 Si.No.6-2.35.3.1} , Providing And Stacking 22.40-53Mm Guage Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Etc All Complete.(Ns) , Supply And Laying Stone Dust Etc All Complete. , Consolidation/Compaction Of Stone Ballast 10Cm Thick (Loose) Coat Including Repairing Of Patches Picking Up To Old Surface Spreading, Ballast Making Medhies To Retain Water And Carriage Of Metal Upto 30M Carriage Of Water Upto 200M Maintenance Of Barriers And All Labour T&P Including Road Roller Charges Etc. Required For Proper Completion Of Work The Stone Ballast Is To Be Supplied To The Contractor Free Of Cost At Site. , Scarifying The Existing Bituminous Road Surface To A Depth Of 150 Mm And Disposal Of Scarified Material With A Lift Upto 3 M And Lead Upto 1000 M As Per Technical Specification Clause 301.4 {Chapter No.20 Si No.16} , Providing And Applying Primer Coat With Ss1 Grade Bitumen Emulsion On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg/Sqm Using Mechanical Means. (As Per Attached Analysis) , Providing And Laying Dense Graded Bituminous Macadam With Higher Capacity Batch Type Hmp Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 Per Cent By Weight Of Total Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 505 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , Providing & Applying Tack Coat With Bitumen Vg-10 Using Bitumen Pressure Distributor At The Rate Of 0.30Kg/Sqm. On The Prepared Primed Granular/Old Painted Surface. Cleaned With Air Compressor. Including All Taxes, Material, Labour, T&P Etc Required For Proper Completion Of The Work. (For Bituminous Surface). (Chapter No.20 Si No.9) , Providing And Laying Bituminous Concrete (Grading-Ii) With 100-120 Tph Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Vg-30 As Per Approved Job Mix Formula Which Ever Is Higher Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification 5Th Revision Clause No. 509 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , S/L/J Of 20Mm Dia Pvc Cunduct Pipe Etc. All Complete. , Making Of Nala Bandha With Sand Bags. With Local Sand Including Etc. All Complete. (Atached Per Annalysis Rate). , Providing Of Nala Bandha For Diversion Of Nala Etc All Complete.(Ns) , Scraping Of Max Phalt Road Including Disposal Of All Scraped Material To A Distance Of 30Mtrs (100 Ft) As Directed By Engineer-In-Charge C.P. & T&P.Etc. All Complete. {Chapter No.20 Si No. 772(A)} , Dismentling Existing Damage Plaster Including Disposal Of Refuse As Directed By E/Ic With In A Distance Of 60 Meters Etc. All Complete. {Chapter No. 17 S.I. No.16 (706)} , Supply And Fixing Of Light Fitting Switch Board. (None Sheduled) , Fixing Of Gate, Grill And Jali Etc. All Complete. (None Scheduled) , Supply & Fixing Of Wiring Sub Main. , Supply & Fixing Of Plug Point 15Mm. , Supply And Fixing Oxided Iron Fitting Etc. All Complete (None Scheduled) , Supply/Fixing Of 16 Mm Pvc Pipe Adopter Suitable For Item No. , Supply/Fixing Of 20 Mm Cvc Pipe Adopter Suitable For Item No. , Supply & Fixing Of 27Watt. Cfl Etc. All Complete. , Supply And Fixing Cat Eye Including Supply Of All Material, Loabour, T&P Etc. All Complete. (Chapter No.28 Si.No.5B) , Supply And Fixing Wiring Of Light Point. (None Sheduled) , Making Connection Of Drain Of Sewer Line With Existing Man Hole Including Breaking Into And Making Good The Walls, Floors With Cement Concrete 1:2:4 Cement Plastered On Both Side With Cement Mortar 1:3 Finished With A Floating Coat Of Neat Cement And Making Necessary Channels With Cement Concrete 1:2:4 For The Drain Etc. All Complete. (Chapter No.25 Si.No.9) , Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Course Sand : 4 Graded Stone Of Size 20 Mm Nominal Size) Laid In One Layer Finished With A Floating Coat Of Neat Cement (40 Mm Thick Floor). (Si No. 665), Nbo 14.71) , Providing And Fixing Of Foot Steps Etc All Complete. (Ns) On Market Rate , Providlng And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Ls:8931.15 Mm Nominal Bore , Supply & Fixing Of C.P. Brass Stop Cock (Conceled) Of Standerd Design Of Approve Quality Etc. All Complete. (Chapter No.21 Si.No.44) , Providing And Fixing Close Timbering In Trenches On Both Side & All Complete. (A) 0.00 To 3.00 M. (None Scheduled) , Providing And Fixing C.P. Brass Stop Cock (Concealed) Of Standard Design And Of Approved Make Conforming To Ls:8931..15 Mm Nominal Bore , Fixing Window Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Ls Standards And Weighing Not Less Than 690 Qms.15 Mm Nominal Bore , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 75Mm Diameter. (Chapter No.23 Si.No. 32(Ii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 110Mm Diameter. (Chapter No.23 Si.No. 32(Iii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 140Mm Diameter. (Chapter No.23 Si.No. 32(Iv)) , Rectangular Shape 1500X450 Mm Mirror With Plastic Moulded Frame. (Chapter No.22 Si.No.77) , Making Ornamental 2D Painting With Special Design Make By Specialist Painter Laying Of Two Coat Birla White Putty And Design By Asian Paint Including All Material Etc. All Complete. (Nn Approved) , Providing Of 8Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Fixing Door Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Supply And Fixing 6Mm (1/4) Thick Chine White Glazed Tiles In Flooring Or Dado Laid With 1:3 Cement And Approved Coarse Sand Mortar And Approved Coarse Sand Mortar Finished With White Cement Jointed And Polishing Complete Including Supply Of All Materials, Labor For Porper Completion Of The Work. (Chapter No.14 S.I. No. 628) , Supply & Fixing Of Pre-Cast M-30 Cement Concrete Grass Paver (Rubber Molded Coloured) Over 40Mm Thick Local Sand Bed, With 3Mm Thick Joints Filled With Local Sand Including Leveling, Tempering And Sweeping Etc., Interlocking Bricks Will Be As Description Given In Direction Issued By The Ircsc-03-2004 And Should Be Isi Marked All Complete. 80Mm Thick, Strength Should Not Less Than M-30. (Tiles I Shape Decided By Engineer-In-Charge With Isi Mark) {Chapter No.20 Si.No.17F) , Repairing Of Leakage And Damege Pipe Line Etc All Complete.(Ns) , Lettering & Painting Of Wall Etc. All Complete. , Red Sand Stone Work For Wall Lining Etc. (Veneer Work) 30Mm Thick In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Camping Jointing In White Cemnet Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching Complete. (Chapter No.18 Si.No.1 New) , Providing And Fixing White Vitreous China Wash Basin Size 630X450mm With Pair Of 15Mm C.P. Brass Pillar Taps Including Etc. All Complete. (Chapter No.24 S.I. No. 3(A)) , Cleaning Of The Site For Workable Etc. All Complete. (Non Scheduled) , Providing Of 32Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 1200X600x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 600X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x100mm Etc All Complete. (As Per Market Rate) , Fixing Of Reinforced Cement Concrete Slab Etc All Complete. (Ns) , Raising & Re-Fixing Of Manhole Including All Material Labor T&P Etc. All Complete. (Non Scheduled) , Supply & Fixing Reinforced Cement Concrete Menhole Cover Heavy Duty Size Etc. All Complete. (Non Scheduled) , Providing Laying Spreeding And Compacting 45-90Mm Stone Agreegate For W.M.M. Specification Etc. All Complete. (None Scheduled) , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing Of 3D Ornamental Wall Art Painting By Architect & Special Painter Including Scrapping Of Wall And Two Coat White Putting White Putty One Coat Primer All Labour Scaffolding Work & Labour T&P Etc. Painting By Asian Special Paint Etc. All Complete. (Rate Mr As Smart City, Agra) , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam (22.40-53Mm) Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With 3 Wheeled Steel/ Vibratory Roller In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening/ Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density. , Providing & Laying 5Cm. Thick B.M. Laying By Paver Finisher Bitumen Of The @3.4%Kg By Weight And Stone Grit Etc. All Complete. (20-Chapter Analysis Rate) , Providing & Laying 2.5Cm. Thick S.D.B.C. Laying By Paver Finisher Bitumen Of The 5% By Weight Etc. All Complete. (20-Chapter Analysis Rate) , Supply & Fixing M/S Iron Work Display Board Including Painting, Lettering Etc. All Complete. (None Schedule) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.4A) , Supply And Fixing Of Precast Reinforced Reinforced Cement Concrete Benches (Pfrc) Ornamental Benches With 02 Year Warranty Etc All Complete. (None Scheduled) , S/L/F Supply Of 1000Mm Dia Np-3 Reinforced Cement Concrete Hume Pipe In Proper Position As Directed By E/I Including Catage Of Pipes Collars Upto 30M Distance Etc All Complete. (Chapter No.1 Si.No.31(E) ) , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2Cm (3/4) Gauge Approved Stone Ballast In The Proportion 1:2:4 In Reinforced Cement Concrete Slab Excluding Supply Of Reinforcement And Its Bending But Including Its Fixing And Binding The Same With 24 Bwgi Binding Wire And Including Necessary Centring And Shuttering Etc. And Also Including Supply Of All Materials Labor And Tools And Plants Etc. Required For Proper Completion Of The Work. Strength Of The Concrete Shall Not Be Less Than M-150. (5-Chapter S.I. No.-284) , Supply & Fixing Granite Stone Work Display Board (Size 2.50Ft X 4.00Ft) Including Painting, Lettering Etc. All Complete. (None Schedule) , Installation Of 1.50 H.P. Isi Marked Sumbercible Pump Etc All Complete. (Attache As Per Santion Annalysis) , Cost Of Septik Tank Attache As Per Estimate & Details. , Plain Glass Best Quality, Cut To Size 5Mm Thick , Providing And Fixing Designer Dustbin (Market As Per Catlog Code No. Db-03). , Supply Of Planting Of Trees Amaltas, Jaarul, Arjun Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 110Mm Is:4984:2016 (As Per Market Rate) , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 160Mm Is:4984:2016 (As Per Market Rate) , Supply & Fixing Of Pre-Cast Reinforced Cement Concrete Drain Cover Different Size Etc All Complete. , Supply And Sowing Of Grass In Park Including One Year Mantinance Etc. All Complete. (None Scheduled) , Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 8 Km Lead Complete (Earth Measure Dinstacks Will Be Reduced By 20% For Payment) .(Dar 2020 Hort-Basic Rates 2.2) Based , Supply And Fixing Of Light, Fitting Switch Board. (None Sheduled) , Supply And Fixing Of Chest Press Double. , Supply And Fixing Of Leg Press Double. , Supply And Fixing Of Triple Twister. , Supply And Fixing Of Shoulder Builder Double. , Supply And Fixing Of Air Walker. , Supply And Fixing Of Doublebar. , Supply And Fixing Of Rower. , Supply And Fixing Of Horse Rider. , Supply And Fixing Of Plastic Side With Iron Ladder 12 Feet Length. , Supply And Fixing Of See Saw Double Board Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Sliding With Swing Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Slide Ground Level Mgr Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Snack Climber Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Slide Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Nursery Combo Set Revolving Jhoola Etc All Complete. (None Scheduled) , Providing And Fixing Of Stainless Steel Water Cooler 4 Tap Etc. All Complete. (None Schedule) , Supply And Fixing Bansi Paharpur (Red/White) Bharra Sand Stone Fully Moulded, Engraved, Carved With Polishing And Dressing Including Clamp And Fashners Of Pillar Set With All Complete Work Etc. (None Schedule) , Supply & Fixing Of Rubber Moulded Cement Concrete Kerb Stone (Double Tapper) M-20 With Labour T&P Etc All Complete. , Supply And Installation And Jointing Of 500Mmx500mm Epdm Rubber Mat Flooring Of Thickness 24Mm Puling All Labour Material T&P Etc. All Complete (Rate As Per Jhs Jscl Mr). , Providing And Laying Autoclaved Aerated Cement Blocks Masonry With 150Mm/230Mm/300Mm Thick Aac Blocks In Super Structure Above Plinth Level Up T Floor Five Level With Reinforced Cement Concrete Band At Sill Level And Lintel Level With Approved Block Laying Polymer Modified Adhesive Mortar All Complete As Per Direction Of Engineer-In-Charge (The Payment Of Reinforced Cement Concrete Band And Reinforcement Shall Be Made For Separately). , Providing And Fixing Of Barricading Of 100Mm Average Ballies With In A Distance Of 1.50 Meter For 3 Rows Of 3Q. 3 Nosof Cross Ballies, Two Supporting Ballies Of 3 Meter Ballies And 2 Nos Perpendicular Ballies Tie With Moonj Rope Including Supply Of All Material Such As Ballies Rope T&P Required For Proper Completion Of Work And Also Including Labour Component (Material Will Be Property Of Contractor After Dismantling). , Providing & Fixing Of Green/White Shade Multipurpose Net/Cotton Cloth Proper Completion Of Work Etc All Complete. (Ns) , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Supply And Fixing Of Ward Up Big As Per Attach Photograph & Analysis. , Supply And Fixing Of Ward Up Small As Per Attach Photograph & Analysis. , Supply And Fixing And Installation Of See Saw Double Board Jhoola Isi Marked As Per Direction Of Engineer-In-Charge Etc. All Complete As Per Attach Photograph & Analysis. , Supply And Fixing Of Cast Iron Banches As Per Attach Photograph And Analysis And Direction Of Engineer-Incharge Etc. All Complete. , Complete De-Silting And Cleaning Of All Types Of Sewer Lines By Using Super Suction Machine And Taking Out Of Cebris/Silt Etc Including Safe Disposal Of Silt As Directed By The Deptt. Including Cost Of All Consumble Likes Disel Oil, Water Ret Provision Of Diversion Of Line If Required With The Help Of Sewage Pumps, Poser Backup From Gene Sets For Running Of Pumps. Night Lighting Etc Barricades Display Of Entire Operation Along With Sadequate Safely Equipments Must Be Used By Sewer Workers Size Fo Sewer Line To Be Desilted As Detail Above 1000Mm Dia. , providing and laying Gsb With Graded Stone Ballast With Stone Grit Size Stone Ballast With Hand Ramming Watering Including All Material Labor T&P Etc.All Complete (Ns) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Providing & Laying Of Polythene Etc. All Complete. , Supply & Fixing Of Factory Wired Intergal Led Flood Light Luminaries With Die Cast Aluminum Housing Built With Driver Set Suitable For 140W. To 150W. Confirming To Ip 65 Protection Complete In All Respect. Cat Aaa ( S.I No. 1454 Pwd Schedule 2018) , Providing, Laying, Spreading And Compacting Stone Aggregates 45-63Mm Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Ro Ling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screen Ing/Bindin G Materials To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. (Labour , A Pre-Laminated Sheet, Often Referred To As A Prelam Sheet, Is An Engineered Myka Wood Work Product Where A Decorative Layer, Like Laminate Or Veneer, Is Pre-Attached To A Core Material Like Particleboard Or Mdf. These Sheets Offer A Durable And Aesthetically Pleasing Surface For Furniture, Interior Design, And Construction.(None Scheduled) , Same Is Ltme No-1 & Extra For Providing Lipping With 2Nd Class Teak Wood Battens 25 Mm Minimum Depth On All Edges Of Flush Door Shutters (Over All Area Of Door Shutter To Be Measured) , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration (Chapter No.8 Sr.No.6.1) , Supply And Fixing Of Advertisement Sign Board Size 4X3 As Per Direction Of Engineer-In-Charge Etc. All Complete , Supply Of Planting Of Trees Washington Palm, Amaltas, Cycus Revoluta, Ficus Benjamina Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Providing Of Rain Water Harvesting Drawing And Analysis Etc. All Complete (Details Attached). , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Drilling Of 200Mm Dia T/W Bore Suitable For 110Mm Dia Pipe All Complete With Labour T/P As Per Direction Of Engineer-In-Charge. , Suppply And Lowering Of 110Mm Dia 6 Kg/Cm2 Pvc Pipe (Phenolex Or Apb By E/I) All Complete. (Isi Marked Only) , Supply And Pouring Of Pea Gravel Suitable For T/W Bore All Complete. As Per Direction Of E/I (If Required) , S/L Of 1.50 H.P. Submersible Pump Set 65 Mt Head. (Pluga, Crompton, Ksb Etc.) I.S.I. Marked Etc All Complte. (Water Filled Only) , Supply & Fixing Of 100Mm Pvc Pipe Adopter Suitable For Item No.2 , S/L Of 1.50 H.P. Submersible Motor Controlled Starter Pannel All Complete. Crompton Make. (I.S.I. Marked Only) , Supply/Fixing Of 25Mm Gate Valve All Complete. Approved Make. , Supply/Fixing 4Sq.Mm 3 Core Copper Cable All Complete. , S/L Of 40Mm Dia Red Screen Ashirbad Pvc Pipe All Complete. , Supply/Fixing Of M.S. Clamp Made With 65X6mm X600mm Long M.S. Streep Suitable For 110Mm Dia Pvc Pipe For Holding All Complete. , Supply/Fixing Of 40Mm Dia G.I. Pipe B-Class Complete With Labour Charge. (Including All G.I. Fitting) , Supply & Fixing Of 25Mm Cpvc Etc. All Complete. , Development Of Bore Till The Discharge Is Free From Turbidity Of Compression Including Labour, Required For Proper Completion Of Work. , Supply And Fixing Of Precast Readymade Boundry Wall Hieght 8 Feet Etc All Complete. (As Market Rate) , Useable Brick (A) Class M-L50 , Useable Brick (B) Class M-100 , Useable Brick(C ) Straiqht Over Brunt , (D) Tiles, Bull Nose Drip Course Brick , Brick Ballast (A) Brick Ballast 40Mm Qauge , Brick Ballast (B) Class-150 Brick Ballast 25Mm Gauge , Brick Ballast (C ) Brick - Bats Of O.B.B./150 Bb , Fiy Ash Brick (Specification/Strength Should Not Be Less Than Bricks - M-{50) 230Mmx1 10Mmx75mm , Aac Block Autoclaved Aerated Concrete Block (Aac Block) Conforming To Ls : 2185 - 2005 (Part-3) Including Loading, Cartage Upto Site, Unloading, Stacking And Including All Levies And Royalties If Any But Excludinq G.S.T , Stone Ballast (Khera Thakur Quarry Bharatpur Rajsthan) 45-90 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 45-63 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 22.4-53 Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 20Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 19Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) Crushed Stone Dust 2.36Mm & Below , Stone Dust , 13.20Mm Guage , 11.20Mm Guage , 6.7Mm Guage And Below , Stone Boulder (From Khera Thakur Quarry) (A) 25-40 Kq , Stone Boulder (From Khera Thakur Quarry) (B) 40-60 Kq , Stone Boulder (From Khera Thakur Quarry) (C) Stone Bricks Dressed , Grit {District Gwalior(Mp) Quarry}(Berja,Chandrapura, Turak Pura,Parsen,Sumerpada Padampur Kheria, Bhileti & Bilara) District Bhind (M.P.)(Pali, Dirman & Piparsana) , (A) 45-63 Mm Guage Stone Ballast. , (B) 22.4-53 Mm Guage Stone Ballast. , (C) 20-40 Mm Guage Stone Ballast. , (D) 20 Mm Guage Stone Ballast. , (E) 19 Mm Guage Stone Ballast. , (F) 16 Mm Guage Stone Ballast. , (G) 13.20 Mm Guage Stone Ballast. , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured Rubber Moulded , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 (Plain) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 16 X6 (Designer) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 18 X6 , Coarse Sand (Excluding Actual Bulkaqe) , Fine Sand (Excludinq Actual Bulkaqe) , (L) Local Sand , Cement (L) Portland Cement (J.P., A.C.C., Birla, J.K.) O.P.C , Cement (Ll) Cement (P.P.C.) , Cement (Lll) White Cement (J.K. Or Birla Brand) , Green Net(Chapter- 1 Sl.No 44) , Tractor Trolley With Driver Including P.O.L. (Chapter-2 Sl.No 25)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 142
Uttar Pradesh View Result →
10.
Public Administrative Department #11286668 AOC
Tender For Construction/Repair Work In Record Room/Nazarat Department - (a) Bricks M-150 2 (b) Bricks M-100 3 (c) Bricks-Straight over brunt 4 (d) Bricks- Tiles (Ist Class) 5 (e) Brick Bats M-75 6 (f) Brick Bats (O.B.) 7 Fly ash Bricks (specification/strength should not be less then Bricks M-150)size 230x110x75mm 8 Fly ash Bricks Tiles (specification/strength should not be less then Bricks M-150)size 230x110x38mm 9 Fly ash Concrete curve Stone (specification/strength should as per mord/morth) size 300x300x150mm (M30) 10 (a) 5.00cm. Gauge 11 (b) 4.00 cm. gauge 12 (c) 2.50 cm. gauge 13 Stone Grading Materials Aggregate - For 37.5 mm Maximum size - 22.4 mm to 5.6 mm 14 Aggregate - For 37.5 mm Maximum size - 45 mm to 22.5mm 15 Aggregate - For 37.5 mm Maximum size - Below 5.6 mm 16 Aggregate - For 53 mm Maximum size - 22.5 mm to 5.6mm 17 Aggregate - Grading I (40 mm nominal Size) 10 mm - 5 / 4.75 mm 18 Aggregate - Grading I (40 mm nominal Size) 25 mm – 10mm 19 Aggregate - Grading I (40 mm nominal Size) 37.25 mm -25mm 20 Aggregate-Grading I 90 mm to 45 mm 21 Aggregate-Grading II 63 mm to 45 mm 22 Aggregate-Grading III 53 mm to 22.4 mm 23 Aggregates 22.4 mm to 2.36 mm for wet mix macadam 24 Aggregates 45 mm to 22.4 mm for wet mix macadam 25 Crushed Sand or Grit Passing 2.36 mm and retained on 180 micron 26 Crushed Stone Aggregate 26.5 mm to 75 micron 27 Crushed Stone chipping 13.2 mm nominal size 28 Crushed Stone Chipping 6.7 mm size 100% passing 11.2 mm and retained on 2.36 mm 29 Crushed Stone Chipping 6.7 mm size 100% passing 9.5 mm and retained on 2.36 mm 30 Crushed Stone chipping 9.5 mm nominal size 31 Crushed Stone Coarse Aggregate Passing 53 mm and retained on 2.8 mm 32 Fine aggregate/Crushed sand 2.36 mm to 75 micron 33 Stone Boulder of size 150 mm and below 34 Stone for Coarse Rubble Masonry 1st Sort 35 Stone for Coarse Rubble Masonry 2nd Sort 36 Stone for Random Rubble Masonry 37 Stone for Stone Set Pavement (300 mm x 200 mm x 150MM 38 Well Graded Material for Sub-Base - Grading I 2.36 mm below 39 Well Graded Material for Sub-Base - Grading I 53 mm to 9.5 mm 40 Well Graded Material for Sub-Base - Grading I 9.5 mm to 2.36 mm 41 Well Graded Material for Sub-Base - Grading II 2.36 mm below 42 Well Graded Material for Sub-Base - Grading II 26.5 mm to 9.5 mm 43 Well Graded Material for Sub-Base - Grading II 9.5 mm to 2.36 mm 44 Well Graded Material for Sub-Base - Grading III 2.36 mm below 45 Well Graded Material for Sub-Base - Grading III 4.75 mm to 2.36 mm 46 Well Graded Material for Sub-Base - Grading III 9.5 mm to 4.75 mm 47 Boulder with minimum size of 300 mm for Pitching at Site 48 Granular Material or hard murrum for GSB works at Site 49 Close graded Granular sub-base Material 37.5 mm to 9.5 mm 50 Close graded Granular sub-base Material 9.5 mm to 4.75 mm 51 Close graded Granular sub-base Material 4.75mm to 75 micron mm 52 Close graded Granular sub-base Material 2.36 mm 53 Coarse graded Granular sub-base Material 4.75mm to 75 micron mm 54 Coarse graded Granular sub-base Material 4.75 mm to 2.36 mm 55 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 56 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 57 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 58 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 59 Coarse graded Granular sub-base Material 53 mm to 26.5mm 60 Stone screening material for WBM Grading-2 and 3 61 Miscellaneous Items Cement Grey PPC 62 Cement Port land (ordinary) 63 Cement white viz J.K./Birla 64 Wall Putty J.k / Birla white 65 Plaster of Parish Sakarni or eqvivalent 66 Cinder 67 Distemper oil bound 68 Dry Distemper ordinary of bes quality (Approved manufacture and approved quality viz. Burger, Asian, J&N 69 Glass Ordinary cut to size (a) 3mm thick (Wt. 7.5 Kg./sqmt.) 70 (b) 4mm thick (Wt. 10.0 Kg/sqmt.) 71 (c) 5.5 mm thick (Wt. 13.5 Kg/sqmt.) 72 White lime (unslacked) for White Washing 73 White Lead (Best Quality PIG Lead) 74 (d) G.I. Barbed wire 75 (e) Iron Sheet Galvanized Plain 22 gauge 76 (f) Iron Sheet Galvanized Plain 24 gauge 77 (g) -do- but corrugated 24 gauge 78 (h) -do- but black plain 18 gauge 79 (J) Expanded metal 2-0 cm mesh 16/17 guage 80 (K) M.S. binding wire 24 gauge 81 (i) 1x2 size of 10 gauge wire 82 (ii) 1x3 size of 10 gauge wire 83 (iii) Murga Jali 1/2x24 gauge 84 (iv) 1x2 size of 10 gauge wire 85 (i) F -d sections @ 1.58 Kg/R/M 86 (ii) F -B/T/T Secs. @ 2.40 Kg/R/M 87 (iii) F - Sections @ 0.74 Kg/R/M 88 (a) Super white 89 (b) Commercial white, coloured & black 90 Marble Dust (200 mesh) 91 Nails (Country) 92 Nails (Wire) 93 (a) Oil (linseed double boiled) 94 (b) Oil (Terpentine) 95 (a) Paint anticorosive Bitumenous 96 (b) Black Japan 97 (c) Superior Ready Mixed paints (Grade II) in 20 ltrs. Drums of approved manufactures and aporoved make 98 (i) Dark Green Oxide 99 (ii) Deep Black Oxide 100 (iii) Blue Oxide 101 (iv) Chocoiate Oxide 102 (e) (i) Red Oxide primer surface for steel (in 20 ltrs. Drum) (Approved manufactures and approved make) 103 (ii) Red lead paint ready mixed for roof (in 20 ltrs. Drum) (Approved manufactures and approved make) 104 (f)(i)PaintenamelGradeIsuperClass(Approved manufactures and approved make) 105 (ii) Paint (Aluminium) 106 (g) (i) Paint primer for wood 107 (ii) Paint primer for metal 108 (h) (i) Cement Primer of Berger or equivalent 109 (ii) Water proof cement paint (in 50 kg. drums) 110 (i) Clear synthetic (in 20 ltr drums) 111 (ii) Copall 112 (iii) Weather Coat cement paint for exterior 113 (iii) Weather Coat cement paint for exterior 114 Water Proofing compound (Dr. Fixit) 115 Polish (mansion & wax) 116 (iv) P.V.C. Pipe 110 mm dia & 6Kg./CM2 (ISI Marked) 117 (v) Same as above but 90 mm dia 118 (vi) Same as above but 75 mm dia 119 (v) Same as above but 140 mm dia 120 (a) Corrugated 121 (b) Plain 122 (i) Internal dia 5 cm (Wt. 11.41 Kg.) 123 (ii) Internal dia 7.5 cm. (Wt. 16.52 Kg.) 124 (iii) Internal dia 10 cm. (Wt. 21.67 Kg.) 125 (iii) Internal dia 15cm. (Wt. 21.67 Kg.) 126 (i) 5.0 cm dia (Wt. 2.30 Kg. ) 127 (ii)7.5 cm dia (Wt. 3.30 Kg.) 128 (iii) 10.0 cm. dia (Wt. 4.60 Kg.) 129 (i) 5.0 cm dia (Wt. 2.10 Kg. ) 130 (ii) 8.0 cm dia (Wt. 3.20 Kg.) 131 (iii) 10.0 cm. dia (Wt. 4.40 Kg.) 132 (c) C.I. Spout 23.0 cm Long 40 mm dia 133 (a) Rope (Moonj) 134 (b) Rope (HEMP) 135 (c) Rope (cotton) 136 (d) Spun yarn 137 Rivets 138 Coarse sand of approved quarry (Finess modules 2.20) at site of work in the district Saharanpur, Muzaffarnagar 139 Finesand(blendedtofineness modulus1.25) Saharanpur, Muzaffarnagar and Shamli 140 (a) Local Sand 141 Surkhi 142 White lime (slacked) 143 (a) Washers (Lumpet) 144 (b) Washers (Bitumen) 145 (c) Washers G.I. 146 J.Hooks 147 Wood presevator in 5 ltrs. Pack. 148 (a) Teak wood 149 (b) Sheesham 150 (c) Indian Sal 151 (a) Teak wood 152 (b) Sheesham 153 (c) Indian Sal/ maleshien 154 Fuel Wood (Dry) 155 (a) 2.2 cm width 156 (b) 3.50 cm. width 157 (c) Same as 48 (a) but 5 mm thick 158 (d) Same as 48 (b) but 5 mm thick 159 Antitermite treatment oil concentrate to 0.30 (as per IS 1307) 160 (i) 40mm thick 161 (ii) 50 mm thick 162 (a) KOTASTONE (machine cut ) 60 x 60 cm. 163 (a) Marble White 60 x 60 cm. 164 (b) Marble White 60 x 60 cm. 165 Granite stone black or Grey Polished 166 Granite stone black or Grey Polished 167 Polythene Sheet (125 Micron) 168 Plastic waste which is cleaned is cut into a size between 2.36mm and 600 microns and of maximum size 2.36 mm length and 2.00mm width. 169 (a) For Floor Size 300 x 300 170 (b) For Wall Size 200 x 300 171 (c) Vitrified Tiles size 600 x 600 172 RCC Hume Pipe 350mm dia 173 RCC Hume Pipe 450mm dia 174 (a) Ordinary 175 (b) For floor and tile work 176 Carpenter 177 Black Smith 178 Hammer man 179 Fitter 180 Painter 181 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 182 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 183 (b) Electrician Licensed with Kit or Koshal vikash certificate 184 (b) Electrician Licensed with Kit or Koshal vikash certificate 185 Mate 186 Beldar / Mali 187 Bhishti with Mushk 188 White Washer 189 Belder for bitumen or tar work 190 Glazier 191 Bhainsa Buggi with driver 192 Tractor trolley with driver excluding P.O.L. 193 Amin/Tracer 194 Chaukidar 195 Jeep/Truck/Tractor/Roller Driver 196 Generator Operator 197 Mixol Operator 198 Pump Operator 199 Cleaner 200 Sweeper (Full Time) 201 Sweeper (Part Time) 202 Tractor with harrow or water TankerTrolly with 203 Tractor with harrow or water TankerTrolly with 204 driver and P.O.L. 205 J.C.B. Machine with driver with P.O.L. 206 Crane (20-50 Tonnee) with Driver and P.O.L. 207 Ricksaw Thela with Driver 208 (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) 209 (a) As in item 251 (a) above but excavation in soil mixed with Moorum, shingle, kankar requiring the use of special tools and plant such as pickaxes, sabbals etc. (where machine can not move ) 210 (a) Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. (Royality removed by Govt. ) for small works/ Abadi area. (where machine can not move ) 211 (a)Add to items (251-253) for every additional 30 M. (100 ft.) lead or part of 30 M (100 ft.) or for every additional 1.50 M. (5 ft.) lift or part of 1.50 M. (5 ft.) 212 (a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measuredat a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. 213 (i) Cleaning jungle including up rooting ofrank, vegetations grass, push, wood trees and amplings of grith upto 30 cms. measured at a height of 1 M. aboveground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared. 214 (a) Same as above 259(i) above but grass only. 215 (a) Add to item no. 253 (a) for mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etc. 216 (b) As in item no. 260 (a) above but for departmental works excluding Roller charges and its fuel, cost of water, allT&P. and sundries etc. but including carriage of water to site. 217 Upto ½ Km 218 Ist Km. (If lead is beyond ½ Km.) 219 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 220 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 221 As in item 273 above but in proportion 10:5:1 222 As in item 273 above but in proportion 8:4:1 223 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 224 (b) Same as item no. 279 (a) but in proportion of 1:3:6 225 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 226 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 227 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 228 As in item 273 above but in proportion 10:5:1 229 As in item 273 above but in proportion 8:4:1 230 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 231 (b) Same as item no. 279 (a) but in proportion of 1:3:6 232 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 233 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 234 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 235 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 236 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 237 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 238 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 239 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 240 As in item 309 above but for walls of one brick thick, add for extra labour 241 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 242 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 243 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 244 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 245 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 246 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 247 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 248 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 249 As in item 309 above but for walls of one brick thick, add for extra labour 250 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 251 Teak wood wrought framed and fixed including simple mouldings, straight work as in chaukhats including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 252 As in item No. 401 but for sheesham wood 253 As in item no. 401 but with Indian Sal wood 254 Supply & fixing of 4.5 Cm. thick teak wood part panelled and part glazed door and window shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. Including fixing the glass panes with putty for bradglass and glass to be 4 mm. thick. Fitting with necessary screws to be supplied by the deptt. 255 Providing and fixing Glass panes with teak wood beading in doors and windows as desired by the Engineer incharge including cost of all materials, fittings, hinges, labour, T&P all etc. required for proper completion of the work. 256 As in item no. 409 above but fully panelled. 257 As in item no 409 above but fully glazed. 258 As in item no. 409 above but 3.8 cm. thick. 259 As in item no. 411 above but 3.8 cm. thick. 260 As in item no. 412 above but 3.8 cm. thick. 261 As in item no. 409 above but 3.8 cm. thick, Shisham wood. 262 As in item no. 411 above but 3.8 cm. thick, Shisham wood. 263 As in item no. 412 above but 3.8 cm. thick, Shisham wood. 264 Supply and fixing of 3.8 cm. (1½) thick Teak wood door and window shutters with panels of heavy Quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm. (1/10 or 1/12 or 1/16 inch) mesh or any other size, with necessary beadings, including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including two coat of black Japan on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. 265 As in item (450) above but in shisham wood. 266 Supply and fixing Galvanized Mosquitos proof heavy quality S.S.Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3x3/8)/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. 267 As in item (455) above but with shisham wood battens. 268 As in item (455) above but with Indian Salwood battens. 269 As in item (455) above but with Deodar wood battens. 270 As in item no. 409 but Indian Commercial flush shutters 35 mm. thick (excluding cost of all fitting). 271 As in item no. 409 but Indian Commercial flush shutters 32 mm. thick (excluding cost of all fitting). 272 As above 471 but Double Leaf Add. extra. 273 Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) 274 As above item no. 473 Aluminium Fittings ISI marked. 275 Supply and fixing of 3.8 cm. (1½) thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings 276 Supply and fixing 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fitting and glass panes (Double Leaf) 277 As in item no. 9.26 above but for single leaf. 278 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 279 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 280 As in item no. 9.29 above but for single leaf. 281 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 282 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 283 As per item above A but with shisham wood batton 284 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 285 Fixing of Curtain rods (Labour only) 286 Fixing of Curtain palmets (Labour only) 287 50x20 mm 288 50x12 mm 289 With 2nd class teak wood beading 62X19 mm. 290 300x16 mm 291 250x16 mm 292 250x10 mm 293 200x10 mm 294 150x10 mm 295 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 296 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 297 As in item no. 9.29 above but for single leaf. 298 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 299 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 300 As per item above A but with shisham wood batton 301 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 302 Fixing of Curtain rods (Labour only) 303 Fixing of Curtain palmets (Labour only) 304 50x20 mm 305 50x12 mm 306 With 2nd class teak wood beading 62X19 mm. 307 300x16 mm 308 250x16 mm 309 250x10 mm 310 200x10 mm 311 150x10 mm 312 250x10 mm 313 200x10 mm 314 150x10 mm 315 100x10 mm 316 125 mm 317 100 mm 318 75 mm 319 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI C sections (39mm x 19mm x O.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric L corners .The panel shall be filled with 3mm thick high - pressure compact laminate asper manufacturers specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). 321 With decorative veneering on one side and commercial veering on other side. 322 With non decorative veneering on both sides. 323 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 324 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 325 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 326 Same as in items 502 above but steel Z Section window excluding Glass panes.(ii) Openable panels 327 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 328 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 329 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 330 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 331 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 332 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 333 with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 334 As per item no 517a but with steel strip inplace of angle iron. 335 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 336 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 337 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 338 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 339 providing and fixing top cover for rolling shutters 2.50 meter wide. 340 Providing and fixing ball bearing for rolling shutters. 341 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 342 (b) Shutters above 16.8m² (180 sqft) area 343 (i) Door chaukhat 344 (ii) window chaukhat 345 (iii) Ventilator chaukhat 346 (iv) Stair case Nosing 347 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 348 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile B 349 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile C 350 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile E 351 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 352 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 353 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 354 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 355 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 356 Same as in items 502 above but steel Z Section window excluding Glass panes. (ii) Openable panels 357 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 358 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 359 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 360 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 361 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 362 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 363 Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 364 As per item no 517a but with steel strip inplace of angle iron. 365 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 366 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 367 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 368 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 369 providing and fixing top cover for rolling shutters 2.50 meter wide. 370 Providing and fixing ball bearing for rolling shutters. 371 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 372 (b) Shutters above 16.8m² (180 sqft) area 373 (i) Door chaukhat 374 (ii) window chaukhat 375 (iii) Ventilator chaukhat 376 (iv) Stair case Nosing 377 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 378 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B 379 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 380 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E 381 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 382 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 383 Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. 384 Same as in item 574 above but Flush pointing Deduct from item 574. 385 Same as in item 574 above but in floors deduction from item 574 & 575. 386 Struck cement pointing with 1:2 cement and fine sand of 1.25 F.M. mortar with colouring including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 387 12 mmthick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. 388 As in item (582) above but with cement and approved coarse sand mortar in 1:3. 389 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:4. 390 As per Item No. 584 but with 1:4 cement and Corse sand 391 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:6. 392 Add for extra labour to all item of plaster if done ceiling. 393 Add for extra labour and materials for plaster over rough face of one brick wall. 394 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3 mm floating coat of neat cement or cement mixed with marble dust in ratio 5:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 395 Same as above item but 1.20cm. thick instead of 2 cm thick. 396 Engraving lines in plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-incharge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (add for extra labour to all items of plaster), 397 Marking drip coarse in sun shades or facie with 1:3 cement and fine sand mortar as per direction of Engineer-in-charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 398 20 mm thick rough cast exterior cement plaster on walls consisting 10 mm thick backing cast of 1:3 cement mortar (1 cement :3 coarse sand) and 10 mm thick finishing coat of 1:3 cement mortar (1cement :3 coarse aggregate of size 6mm to 12 mm ) including arises, chamfers and/or rounded angles not exceeding 80 mm. 399 2.5 cm (1) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1) graded approved stone grit, laid in panels finished with 3 mm. (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3) thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 400 (A) As in item no. 601 above but without base concrete. 401 (B) As in item no. 601 above but base concrete consisting of brick ballast and fine sand & cement in prop. 12:6:1 402 As in item (601) above but floor shall be 4 cm (1½) thick instead of 2.5 (1) thick and without base concrete. 403 Add in item (601) to (603) and (605) when floors are polished including supply of extra cement, chapra batti, Carborandum stone, all other materials, labour, Tools & plants etc. required for proper completion of the work. Marble dust shall be added in the floting coat in ratio of 5:1 (cement and marble dust) if necessary but no extra amount will be paid for it. This includes final finish with french mansion polish or any other approved polish. 404 M-150 Brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming including supply of all materials labour and Tools and Plants etc. required for proper completion of the work. 405 As in item (615) above but bricks laid flat. 406 Granolithic marble flooring 2.5 cm. (1) thick consisting of 2 cm. (3/4) thick layer of 1 part cement, 2 parts of approved coarse sand and 4 parts of 2 cm. (3/4) graded approved stone chips including 5 mm (¼) thick surface coat with ordinary cement, black and white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 1.5 mm. (1/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-incharge and polished by hand or machine and finally finished with French Mansion Polish or any other approved polish and including 8 cm (3) 1:6:12, concrete base, including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work 407 As in item (620) above but when white cement is used in top 5 mm (¼) layer. 408 As in item no. (620) above but when coloured floors are to be made. 409 Granolithic marble dado 2 cm. (¼) thick consisting of 15 mm. (9/16) thick layer of one part cement, 2 parts of approved coarse sand including 5 mm. (3/16) thick surface coat with ordinary cement black or white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 15 mm. (9/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-in- charge and polished by hand or by machine and finally finished with French Mansion Polish or any other approved polish including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work. 410 Same as item no. 625 above but 12 mm. thick dado. 411 As in item (625) above but when white cement is used in top 5 mm. (3/16) thick layer instead of ordinary cement. 412 As in item (625) above but when coloured dados are to be made. 413 Supply and fixing 6 mm. (¼) China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants 414 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (a) of 2.2 cm. depth 415 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (b) of 3.5 cm. depth 416 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (c) of 2.2 cm. depth and of 5 mm thickness 417 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete(d) of 3.5 cm. depth and of 5 mm thickness 418 Extra for making chequers of approved patterns on cement concrete, floor, steps landing etc. 419 Supply and fixing of Kota stone in floor ing 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 420 As in item no. New item (1) above but 25 mm thick. 421 Supply and fixing 10 to 12 mm thick Kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 422 Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work. as per direction of Engineer - in- charge 423 Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. 424 As in item (641) above but for every coat after first coat. 425 As in item (642) above but for every coat on previously painted old wood or Iron work including its sand papering, rubbing and cleaning as required for proper completion of work. 426 Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 427 As in item (644) above but for every coat after the first coat. 428 As in item (645) above but for every coat over previously painted surface 429 Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 430 As in item (647) above but for every subsequent coat on previously treated surface . 431 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 432 As in item (649) above but for every coat after the first coat. 433 As in item (649) above but for every coat after the previous coat or subsequent coat. 434 One coat hot coaltar on new surface including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 435 As in item (652) above but for every coat after the first coat or on previously treated surface. 436 One coat surface or other approved preservative on new wood work, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 437 As in item (654) above but for every coat or on previously treated surface. 438 Oiling wood work with double boiled linseed oil including supply of all materials labour, Tools & plant etc. required for proper completion of the work. 439 Removing paint or varnishing with paint remover or with caustic Soda, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 440 Polishing with French Polish or wax polish (in proportion 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by weight) on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth and a coat of wood filter including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 441 As in item No. (658) above but on previously polished wood or wood based surface. 442 Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 443 Same in item no. (660) but for each coat of water proof cement paint after the first two coat to give an even shade 444 Finishing wall with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 445 Same aas item 660 but for weather coat. 446 Sameaasitembut over previouslypainted surface weather coat. 447 Providing cement primer on old/new surfaces 448 Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 449 Providing wall putty on old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 450 White washing one coat including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 451 As in item 671 above but Two coats. 452 As in item 671 above but Three coats. 453 Colour washing one coat using approved. Colouring material buff, blue, gray or brown shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 454 As in item 674 above but two coats. 455 As in item (674) but using approved colouring material of pink, green or yellow shade. 456 As in item 676 above but two coats. 457 As in item (674) above but colour washing with copper or iron sulphate one coat. 458 As in item 678 above but Two coat. 459 Cement washing including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 460 One priming coat and one coat of dry distemper on new work including supply of all materials, labour, Tools & plant etc. reqired for proper completion of work. 461 As in item (681) but for each coat of distemper after the first coat 462 Dismantling sundries brick work including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 463 Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). 464 As in item (692) above but in mud mortar. 465 Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 466 Dismantling Jack arched or wooden beam and barga roofs including beam, roof concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 467 As in item (695) above but only roof concrete. 468 Dismantlingcementconcreteorbrickor granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 469 As in item (697) above but floor to be stone flagged or tiled floor. 470 Dismantling corrugated Iron roofs walls or partitions,includingpurlins,battensand vertical supports and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 471 Dismantling of girders, trusses and other steel work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 472 Dismantling doors or windows including chaukhats with hold fast and including stacking of materials as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 473 Dismantling doors or windows leaves including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 474 Dismantling doors or windows including chaukhats but excluding hold fast and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 475 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 476 Raking out joint of brick work in cement or lime morter to a depth 1 cm. (3/8) including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 477 Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 478 Supply and fixing of 10cm. (4) internal dia A.C. down pipes Everest or charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3mm. (1 x1/8) fixed to walls with cement motar (1:2) and including supply of 15 cm (6) long 6mm. (1/4) dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. 479 As per item No. 730 above but for 10.0 cm. PVC down pipe.(kissan/suprime make) 480 As per item No. 730 above but for 7.5 cm. PVC down pipe. .(kissan/suprime make) 481 As per item No. 730 above but for 5.00 cm. PVC down pipe..(kissan/suprime make) 482 Providing and injecting chemical for preconstruction anttermite treatment and creating and chemical barrier under and around the column pits wall trenches basement excavation top surface in plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrounding or pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 (part II 1981) Aldrine emulsifiable concentrate or any other approved material such as heptachlor of chlordane will be used. The rate of application of chemical emulsion shall be as follows :- 1.Treatment for massonary and foundation 5 liters per sqm. 2.Back fill in immediate contact with foundation 7.5 liters per sqm. 3.Treatment of surface of plinth filling 5 liters per sqm. 4.Treatment of soil along external perameter of Building 7.5 liters per sqm 5. Treatment of soil under external parameter 5 liters per sqm. 483 Providing & injecting chemical for post Constructional anti termite treatment with drilling holes at junction of floor with walls & pillars, the application of chemicals shall be as per relevant I.S. code and the rate of application of chemical shall also be as provided in the I.S. code, including quarterly inspection and providing required treatment for one year. As direction by the Engineer-in-charge. 484 Consolidation of Kankar by hand rammer including opening out stacks sorting kankar into three sizes, repairing patches in existing road suface with kanker making medhi to retain water and ramming and also including carriage of metal upto 30 meters (100 ft.) carriage of water 200 metre supply and maintenance of barriers and all tools and plants required for proper completion of work, kankar to be supplied to the contractor free at site. 485 (A) As in item No. 752 above but 12 cm. (loose) thick coat of stone ballast. 486 (B) As in item No. 755 (a) above but excluding roller charges. 487 (D) As in item No. 755 (a) above but upto 10 cm. (loose) thick coat. 488 (E) As item No. 755 (b) above but upto 10cm. (loose) thick coat. but excluding roller charges. 489 Water allowance to be allowed on item No. 751 to 756 including carriage & cost of water where water is not available at site. 490 Dag belling 15cm (6) deep in one line aligned with flags and jhandies as directed by Engineer- in-charge. 491 Painting white/coloured traffic lines 8-15 cm. wide in three coats with approved road making paint (spirit base) as directed by the Engineer- incharge, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 492 Painting on divider 1 priming and two coats of enamel paint including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 493 As per item above but every coat after Ist coat and on old surface 494 Brick soling with strainght over burnt bricks laid flat and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8) depth of local earth over the entire surface and including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. 495 As in item No. 762(a) above but with bricks laid on edge. 496 M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8) depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. 497 Renewing patries 1.5 metere wide including dressing surface filling upto 8cm (3) depth and making namunas, at every 15 metre apart on either side of the road true to patri template with side slopes of 1:2 etc. trenches for taking the earth to be so dug that they form a continuous side drain at road boundary. 498 Brick lining on both side of the road of M-150 bricks 7 cm. wide. 11 cm. deep, laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in-charge. 499 Cleaning the existing painted /primed surface and laying premix 2cm. (3/4) thick over a tack coat with graded approved grit and bitumin (labour only) including heating the paint and grit to the required temperature and mixing either in mixer/ hand drum or by manual including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge . including labour charges for tack coat. 500 As in item No. 781 above excluding T&P and sundries etc. for departmental works. 501 As in item No. 781 above but in Patches. 502 As in item No. 781(a) but in Patches. 503 Cleaning the premix surface and laying seal coat with approved 6mm (1/4) graded grit and bitumin (labour only) including heating the paint to the required temperature and mixing either in mixer, hand drum including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge including all T&P and sundries to be arranged by the contractor but exculding roller charges and fuel wood. 504 As in item No. 783 above but in Patches. 505 Providing and applying primer coat over prepared surface of granular base with slow setting bitumen emulsion with spray set including cleaning of W.B.M. surface spreaying primer @ 0.6 kg/sqm (excluding emulsion) all labour T & P etc. as per MORT&H Specification. (labour rate only) in patches 506 Brick soling with straight over brunt bricks laid flat and dry (labour only) including preparation of subgrade to prescribed camber, filling joints with local earth spreading a blinding coat 1 cm (3/8) depth of local earth over the entire surface and including labour T&P etc.required for proper completion of the work.. 507 As in item No. 785 above but with bricks laid on edge. 508 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(i) 350 mm dia 509 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE (ii) 600 mm dia 510 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iii) 800 mm dia 511 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iv) 900 mm dia 512 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(v) 1000 mm dia 513 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work, (i) 350 to 600 mm dia 514 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work(ii) 800 to 1000 mm dia 515 (a) Laying and Consolidation of stone ballast in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 516 (b) Laying and Consolidation of Brick ballast/ bats in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 517 Barricating with approved wooden ballies vertical 10cm. Dia and 2m long fixed in ground 45 cm Deep and 2m apart including 2 rows of horizontal ballies not less than 8cm Dia 45 cm apart centre to centre tied by narial rope including cartage of all material and also including hire charges of ballies complete as direction of Engineer In charge. For two days 518 As item above but for more than 02 days. 519 As per item above but with three rows of horizontal ballies. 520 Dismantling of old brick laid on edge kharanja including stacking of old bricks . 521 As per item above but bricks laid flat / C.C. Interlocking tiles 522 Providing & laying of hot applied thermoplastic compound 2.5 m.m. thick including reflectorising glass beads @ 250 gms./Sq.mt. area. Thickness of 2.5 mm. inclusive of surface applied glass beads as per I.R.C. 2.35. The finished surface must be level, uniform and free from steaks and holes.Supplying & laying of Empty cement bags 523 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 524 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 525 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 526 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 527 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 528 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 529 Providing and laying of interlocking concrete Block pavement having thickness 60 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 530 Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 531 Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 532 Providing & supply gunny bags including cost of sand and stitching of bags and laying in position. 533 Laying of interlocking tiles (labour only) 534 Disposal or malba 535 primaxing carpet 20 mm 536 seal coat 537 earth work in filling 538 45-90 mm gauge stone ballast 539 53-22.4 mm gauge stone ballast 540 stone screening meterial 541 mild steel for rcc work 542 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes 543 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargeb) 20 mm dia. nominal outer dia Pipes 544 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargec) 25 mm dia. nominal outer dia Pipes 545 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charged) 32 mm dia. nominal outer dia Pipes 546 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargee) 40 mm dia. nominal outer dia Pipes 547 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. a) 15 mm dia. nominal outer dia Pipes 548 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. b) 20 mm dia. nominal outer dia Pipes 549 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. c) 25 mm dia. nominal outer dia Pipes 550 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. d) 32 mm dia. nominal outer dia Pipes 551 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineerin- Charge. External work.. a) 15 mm dia. nominal outer dia Pipes 552 b) 20 mm dia. nominal outer dia Pipes 553 c) 25 mm dia. nominal outer dia Pipes 554 d) 32 mm dia. nominal outer dia Pipes 555 e) 40 mm dia. nominal outer dia Pipes 556 f) 50 mm dia. nominal outer dia Pipes 557 g) 62.50 mm dia. nominal outer dia Pipes 558 h) 75 mm dia. nominal outer dia Pipes 559 i) 100 mm dia. nominal outer dia Pipes 560 j) 150 mm dia. nominal outer dia Pipes 561 Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer-in- charge. a) 15 mm nominal bore 562 b) 20 mm nominal bore 563 Providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. a) 15 mm nominal bore 564 b) 20 mm nominal bore 565 Providing and fixing ball valve (brass)ISI marked approved quality complete , High & low pressure with plastic floats complite as per direction of Engineer-in-charge.High or low pressure with plastic floats: a) 15 mm nominal bore 566 b) 20 mm nominal bore 567 c) 25 mm nominal bore 568 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 a) 15 mm nominal bore 569 Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms. a) 15mm nominal bore. 570 Providing and fixing C.P. brass stop cock (concealed) of approved quality confirming to ISI standards IS 8931 a) 15mm nominal bore. 571 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 a) 15 mm nominal bore 572 Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in- charge. 573 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White glazed earthen ware(Indian Type)/Neycer W.C. Pan 580 mm Dia. 574 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 575 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern 576 Single half stall urinal with 5 litre PVC. automatic flushing cistern 577 Range of two half stall urinals with 5 litre PVC. automatic flushing cistern 578 Range of three half stall urinals with 10 litre PVC. automatic flushing cistern 579 Range of four half stall urinals with 10 litre PVC. automatic flushing cistern 580 Single squatting plate with 5 litre P.V.C. automatic flushing cistern 581 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern 582 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern 583 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps 584 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 585 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 586 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 587 White Vitreous China Angle back wash basin of size 600x480 mm with single 15 mm C.P. brass pillar tap 588 White Vitreous China Angle back wash basin of size 400x400 mm with single 15 mm C.P. brass pillar tap 589 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 590 Providing and Fixing while vitreous china pedestal for wash basin completely at the back for the reception of pipes and fittings. 591 ProvidingandfixingStainlessSteelAISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 592 510x1040 mm bowl depth 250 mm 593 510x1040 mm bowl depth 225 mm 594 510x1040 mm bowl depth 200 mm 595 470x420 mm bowl depth 178 mm 596 Long pattern W.C. pan size of 580 mm 597 Orissa pattern W.C. pan size 580x440 mm 598 Providing and fixing water vitreous china pedestal type (Eurepean type/wash down type) 599 Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer–in- charge 600 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete.10 litre capacity – white 601 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white 602 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete. Semi rigid pipe 32 mm dia / 40 mm dia 603 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 604 Providing and fixing soil, waiste and vent pipes: 100 mm dia Sand cast iron S&S as per IS - 3989 605 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 606 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 75 mm dia meter 607 Sand cast iron S&S as per IS - 1729 608 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 609 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 610 Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand): 100 mm dia 611 75 mm dia 612 50 mm dia 613 White vitreous china dual purpose W.C. pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend ISI Mark Kajaria eqvilent Indian made Brand. 614 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/6 litre (adjustable to 4 litre/ 8 litre), including seat cover and cistern fittings, nuts, bolts and gasket etc complete. ISI Mark Kajaria eqvilent Indian made Brand. 615 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design. 100x100 mm size P type 616 with common burnt clay (non modular) bricks of class-150 150x100 mm size p type 617 with common burnt clay (non modular) bricks of class-150 618 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg 619 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg 620 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450 mm internal dimensions 621 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 450 mm internal diameter 622 Square shape 450 mm internal dimension 623 Circular shape 500 mm internal diameter 624 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg 625 Providing and fixing toilet paper holder standrad size ISI marked C.P. brass as per direction Engineer-in-charge 626 Painting letters upto 2.5 cm. size including supply of all materials, labour & tools and plants etc. required for proper completion of the work. 627 As in item 817 above but size above 2.5 cm. but upto 8 cm. 628 As in item no. 817 above 8 cm. but upto 15 cm. 629 Repairing letters upto 2.50 cm. size including supply of all meterials labour and tool and plants etc. required for proper comletion of the work 630 As in item NO. 820 above but size above 2.5 cm. but upto 8 cm. 631 As in item NO. 820 above but size above 8 cm. but upto 15 cm. 632 Painting Border line upto 2.5 cm. wide 633 Painting Border line upto 2.5 cm. to 5 cm. wide 634 Re-Painting Border line upto 2.5 cm. wide 635 Re-Painting Border line upto 2.5 cm. to 5 cm. wide 636 Repainting and relettering number plates on ends of parapets of culverts and bridges and boader line in letters height from 2.5 cm. to 8 cm. with approved enamael paint of superior quality including supply of all materials, labour and T & P etx. required for proper completion of the work. 637 Repainting and relettering of K.M. stones as per IRC design (except 5th km. Stone) with approved enemal paint of superior quality including supply of all materials, labour and T & P etc. required for proper completion of the work. 638 As in item 832 above but 5th km. stone 639 As in item 832 above but 200 H.M. stone 640 Varnishing /Painting on chair /side rack with stand and such other items including all matrial labour T&P etc. complite for proper completion of the work. 641 Varnishing /Painting on Double bed including all matrial labour T&P etc. complite for proper completion of the work. 642 Varnishing /Painting on Singal bed/ Sofa/ Dining table including all matrial labour T&P etc. complite for proper completion of the work. 643 Cutting and repairing of walls or windows for fitting of window type A.C. inculding wooden bidding after fixing. 644 White washing and hirmichi washing of culverts and trees upto a distance of 5 M. from the edge of black top in three bends of 1 width at a height of 1 M. from the crown of the road on either side of road. including supply of all materials, labour, T & P etc. required for proper completion of the work. 645 (a) Same as above but with departmental labour 646 Retro-Reflectorised Traffic Signs Direction and place identification signs up to 0.90 sqm Size BoardProviding and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 647 Direction and place identification signsMore then 0.90 sqm Size Board Providing and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 648 Retro Reflective Signs (Type-IV Sheet) for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM. D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 649 Retro Reflective Signs (Type-IV Sheet) for both side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 650 Retro Reflective Signs (Type-IV Sheet) for both side ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 651 Retro-reflectorised Traffic sign as per IRC 67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. a) 90 cm equilateral triangle with diffinitation plate size (20 cm x 60 cm) 652 b) 60cm equilateral triangle with diffinitation plate size (20cm x 60cm) 653 c) 60 cm Circular with diffinitation plate (20 cm x 60 cm) 654 d) 80mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 655 e) 60mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 656 f) 60 cm x 60 cm square with diffinitation plate ( 20 cm x 60 cm) 657 g) 90 cm high octagon 658 h) 50 x 60 cm single chevron 659 i) 155 x 60 cm Double chevron 660 j) 30 x 90 cm (Left/Right) Object Hazard 661 k) 45 x 90 cm two way Object Hazard 662 l) 30 x 90 cm +45 x 78 cm Guarded/unguarded Railway crossing 663 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of work. 664 Supply, fixing and hoisting of 6.00-7.00 m. spanCantilever Structure in position with one vertical post of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffners & two nos. 8 mm thick MS plates at top welded with structure of 40 mm NB (M) pipe comprising of horizontal, vertical & bracing pipe of 32 mm NB (M) as per structural design requirements & approved drawing with vertical & lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coats of synthetic enamel paint on the whole structure & installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and R.C.C. 1:2:4 with cement, coarse sand and approved 20 mm grit complete for fixing the complete structure in position as per direction of E/I charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the signage structure inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of the work. 665 Supply, fixing and hoisting of 12.00 - 15.00 M span Overhead Structure in position with two vertical posts of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffeners & two nos.10 mm thick MS plates at top welded with structure of 50 mm NB (M) pipe comprising of horizontal, vertical pipe of 40 mm NB (M) and bracing pipe of 32 mm NB (M) as per structural design requirements and approved drawing with vertical and lateral clearance given in clause 802.2 and design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of the work. 666 Reflective Raised Pavement Marker Providing and fixing of raised 667 Reflective Raised Pavement Marker with shanks Providing and 668 Supplying & fixing of Linear Delineator System (LDS)panels made of Micro prismatic Retro Reflective sheeting Type XI duly laminated on thin aluminium foil to a unique corrugated shape to provide retro reflection across wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing Concrite / brick work with 16 Nos Fastner/ screw as per IRC 79-2019 -Rates are inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of work. 669 Providing & fixing of Bollard made (Single side) out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty,etc all T&P/machine material and labour required for proper completion of work. 670 Supply & fixing of Bollard (Double side) Made out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd. fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of work. 671 Metal Beam Crash Barrier 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 672 Metal Beam Crash Barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2.0 m high, 1.5 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete 673 TREE PLATE S/F Reflective tree plate having Size 15 Cm x15Cm, Consisting type XI sheeting over 1.5mm thick aluminium sheet including labour. Material T&P etc for proper completion of the work. 674 Cartage of Ballast, Kankar, Coal, Grit or Sand etc. including loading and unloading but excluding stackings on pucca roads. I st Km. 675 2 nd Km. 676 3 th Km. 677 4 th Km. 678 5 th Km. 679 6 th Km. 680 7 th Km. 681 8 th Km. 682 9 th Km. 683 10 th Km. 684 11 th Km. 685 12 th Km. 686 13 th Km. 687 14 th Km. 688 15 th Km. 689 16 th Km. 690 17 th Km. 691 18 th Km. 692 19 th Km. 693 20 th Km. 694 21 th Km. 695 22 th Km. 696 23 th Km. 697 24 th Km. 698 25 th Km. 699 26 th Km. 700 27 th Km. 701 28 th Km. 702 29 th Km. 703 30 th Km. 704 31st to 75 Km. 705 76st to 100 Km. 706 100st to 200 Km. 707 As in item (231) above but for cement, steel or other materials : Ist Km. 708 2nd and 3rd Km. 709 4th and 5th Km. 710 6th to 10th Km. 711 11th to 20th Km. 712 21st to 30th Km. 713 31st to 50th Km. 714 51 to 75 Km. 715 76th to 100 Km. 716 101st to 200 Km. 717 201st to 250 Km. 718 As in item (231) above but for tar, bitumen Asphalt, Mobile oil or other such materials 1st Km. 719 2nd and 3rd Km. 720 4th and 5th Km. 721 6th to 10th Km. 722 11th to 20th Km. 723 21st to 30th Km. 724 31st to 50th Km. 725 51st to 75 Km. 726 76th to 100 Km. 727 101st to 200 Km. 728 201st to 250 Km. 729 Cartage of brick/stone ballast, kankar coal shingle or sand etc. by head load upto 90 metres (3 chains) including loading and unloading but excluding stacking 730 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (a) Loading 731 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (b) Unloading 732 Unloading of cement, tar or bitumen drum lighter steel sections and other such materials from wagons and stacking the same on platform. 733 As in item No. 236 (a) above but for heavy articles like joist etc. machinery and unwieldly structures 734 Stacking of bricks on edge in row of two to a height of ten brick and in a length of 100 bricks after dressing levelling of the site as required where bricks are to be stacked. 735 Stacking of coal, surkhi, sand, lime, stone grit, stone/brick ballast & boulders etc. to the required sizes to stacks after necessary dressing of site where such materials are to be stacked. 736 237 (a) above but when the materials are either cement / steel. 737 Loading of cement, tar or bitumen drums, lighter sections of steel and other such materials into wagons. 738 As in item 238 (a) above but for heavy articles like joist, machinery and unwieldly structures. 739 Cartage of R.C.C. Hume pipe 30cm. to 46cm. dia and 1.8 meter to 2.5 metre in length (including collars for which nothing extra will be paid ) including loading and unloading. 1st Km. 740 2nd and 3rd k.m. 741 4th and 5th k.m. 742 6th to 10th k.m. 743 11th to 20 th k.m. 744 21st to 30 th k.m. 745 31st to 50 th k.m. 746 51st to onward k.m. 747 As in item No. 239 (c) above but for R.C.C. Hume pipe 50 to 95 cm. dia and 1.8 meter to 2.5 meter in length carriage to be done by truck or by thela. 1st Km. 748 2nd and 3rd k.m. 749 4th and 5th k.m. 750 6th to 10th k.m. 751 11th to 20 th k.m. 752 21st to 30 th k.m. 753 31st to 50 th k.m. 754 51st to onward k.m.
Contract Date: Jun 15, 2026 Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 10
Uttar Pradesh View Result →
11.
Defence #11276668 AOC
Tender For Welcome Maintenance To Omq Area Under Ge (Af) Srinagar.-- Sl. No. Item Description 1 Preparation Of Old Decorated Plastered Or Unplastered Surfaces Of Wall Including Filling Of Holes, Cracks And Undulating Surface With Cement Wall Care Putty Making Surface Even And Smooth And Applying One Coat Of Distemper Oil Emulsion Paint (Obd), Complete All As Specified And Directed 2 Preparation Of Old Decorated Plastered Or Unplastered Surfaces Of Wall Including Filling Of Holes, Cracks And Undulating Surface With Cement Wall Care Putty Making Surface Even And Smooth And Applying Two Coats Of Distemper Oil Emulsion Paint (Obd), Complete All As Specified And Directed 3 Complete Removal Of Existing Treatment From Wall Surfaces And Applying Two Coats Of Oil Bound Distemper Of Approved Colour Including Applying 1Mm Thick Jk Birla Wall Care Putty For Making The Surface Even And Smooth And Filling The Uneven And Small Holes And Making The Edges Of Plaster Properly By Plaster Of Paris Preparatory To Distempering Including Preparation Of Surface By Washing Rubbing Down And Stopping Of Distempered Surfaces, Complete All As Specified And Directed. 4 Preparation Of Old Plastered / Unplastered Old Decorated Surfaces Of Ceiling / False Ceiling, Cornices By Brooming Down Or Steel Brushing, Scraping Down Smoke. Moulds , Moss And Efflorescence Salts, Trading Oil Greasy Spots Etc. And Applying One Coat Of Oil Bound Distemper (Obd), Complete All As Specified And Directed 5 Preparation Of Old Plastered Or Unplastered Ceiling Surfaces And Applying One Coat Of White Wash, Complete All As Specified And Directed. 6 Preparation Of Old Plastered Or Unplastered Wall Surfaces And Applying One Coat Of White Wash, Complete All As Specified And Directed. 7 Preparation Of Old Plastered Or Unplastered Wall Surfaces And Applying Two Coats Of White Wash, Complete All As Specified And Directed. 8 Preparation Of Old Painted Steel & Iron Surfaces Of Any Description Over 10Cm Width Or Girth And Applying One Coat Synthetic Enamel Paint, Complete All As Specified And Directed. 9 Preparation Of Old Painted Wood Surfaces And Wood Based Materials Of Any Description Over 10Cm Width Or Girth And Applying One Coat Synthetic Enamel Paint, Complete All As Specified And Directed. 10 Preparation Of Old Plastered Surfaces Of Wall By Washing Down, Brooming Down Or Steel Wire Brushing Etc. And Applying One Coat Cement Base Paint, Complete All As Specified And Directed. 11 Complete Removal Of Existing Treatment From Brick Walls Or Concrete Plastered Or Unplastered Surfaces Including Scraping Down Smoke Soots, Moulds, Moss And Trading Oil And Greasy Spots Etc. Including Cornices, Pilasters Etc. And Applying Two Coats Of Cement Based Paint Over A Coat Of Primer, Complete All As Specified And Directed. 12 Complete Removal Of Existing Treatment From Brick Walls Or Concrete Plastered Or Unplastered Surfaces Including Scraping Down Smoke Soots, Moulds, Moss And Trading Oil And Greasy Spots Etc. Including Cornices, Pilasters Etc. And Applying Two Coats Of Weather Paint (Apex) Over A Coat Of Exterior Primer, Complete All As Specified And Directed. 13 Complete Removal Of Existing Treatment From Brick Walls Or Concrete Plastered Or Unplastered Surfaces Including Scraping Down Smoke Soots, Moulds, Moss And Trading Oil And Greasy Spots Etc. Including Cornices, Pilasters Etc. And Applying One Coat Of Weather Paint (Apex), Complete All As Specified And Directed. 14 M&L For French Polishing On Surfaces Of Any Description Width Or Girth Including Cleaning And Preparing The Surface Including A Coat Of Wood Filler On New Wooden Works With Two Or More Coats, Complete All As Specified And Directed. 15 S&F In Repairs 32/40 Mm Dia Bore Pvc Flexible Pipe For Wash Hand Basin / Urinal, Complete All As Specified And Directed. 16 S&F In Repairs 15Mm Size Pvc Connections With Ptmt Nuts Of Length 450Mm, Complete All As Specified And Directed. 17 S&F In Repairs Cp Health Faucet Fixed With Spring Action And Lever Along With Flexible Shower Hose With Brass Nut Of Length 1.5M Fitted In The Existing Water Connection In The Toilets, Complete All As Specified And Directed. 18 S&F In Repairs Brass Chromium Plated Tubular Towel Rail 20Mm Dia \D\ Type 60Cm Long Between Flanges, Complete All As Specified And Directed. 19 S&F In Repairs Plastic Water Closet Seat Cover Closed Pattern With Flat Bottom Cover And Mild Steel Chromium Plated Or Aluminized Hinging Device, Complete All As Specified And Directed. 20 S&F In Repairs 15Mm Bore Bib Tap, Cast Copper Alloy, Chromium Plated, With Capstan Handle, Screwed Down, Screwed From Iron Pipe Or For Brass Ferrule, Complete All As Specified And Directed. 21 S&F In Repairs 15Mm Bore Stop Valve / Angle Valve, Cast Copper Alloy, Chromium Plated, Fancy Type, Screwed Down High Pressure With Capstan Head, Complete All As Specified And Directed. 22 S&F In Repairs 15Mm Bore Hot And Cold Water Mixer With Swan Neck For Whb Chromium Plated Quarter Turn Screwed Down, Including Necessary Fittings, Complete All As Specified And Directed. 23 S&F In Repairs 15Mm Size Sink Mixer For Mixing Hot & Cold Water, Cast Copper Alloy Chromium Plated With Capstan Heads, High Pressure, With Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe, Complete All As Specified And Directed. 24 S&F In Repairs 15Mm Bore Chromium Plated Wall Mixer 3-In-1 System Wall Mixer With Overhead And Hand Shower Arrangement With Connecting Legs, Wall Flanges And Wall Bracket For Hand Shower, Complete All As Specified And Directed. 25 S&F In Repairs 10 Litre Capacity Pvc Valveless, Syphonic Action Type, Flushing Cistern Low Level, White With Inlet Ball Valve, Float And Handle Including Brackets And Pvc Flush Pipe Etc., Complete All As Specified And Directed. 26 S&F In Repairs 5.5Mm Thick Sheet Glass Shelf Assembly Consisting Sheet Glass, Chromium Plated, 600Mm Long And 120Mm Wide With Chromium Plated Brackets, Guard Bar And Railing, Complete All As Specified And Directed. 27 S&F In Repairs Vitreous China Wash Hand Basin, White Flat Back, Size Of 550X400Mm Including Cutting For And Pinning In Ends Of Brackets (Including Supply And Fixing Of Brackets) Or Erecting Stand, 32Mm Brass Chromium Plated Waste Fitting With Long Screwed Shank And Fly Nut Flangedend Bedded In Red Led Cement, Chain And Plug And Porcelain Stopper, Complete All As Specified And Directed. 28 S&F In Repairs For 15Mm Bore Tubes, Medium Grade, Galvanised, With All Fitting, ( Such As Bends, Elbows, Tees, Short Pieces, Connectors, Back Nuts, Diminishing Pieces, Caps, Plugs, Unions Etc.) And Fixed Complete To And Ceiling With Clips, Wall Hooks, Wooden Plugs Or Laid In Floors Including Screwing And Waste And For Forged Bends On Piping As Required, Complete All As Specified And Directed. 29 S&F In Repairs For 20Mm Bore Tubes, Medium Grade, Galvanised, With All Fitting, ( Such As Bends, Elbows, Tees, Short Pieces, Connectors, Back Nuts, Diminishing Pieces, Caps, Plugs, Unions Etc.) And Fixed Complete To And Ceiling With Clips, Wall Hooks, Wooden Plugs Or Laid In Floors Including Screwing And Waste And For Forged Bends On Piping As Required, Complete All As Specified And Directed. 30 S&F 500 Litres Capacity Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Including Dismantling Existing Water Tank And Removing From Site, Complete All As Specified And Directed. 31 Cleaning And Removing All Scale And Dirt, Etc. From Tanks And From Mouths Of Circulating Pipes, Etc Of Capacity Upto 500 Litres And Refixing The Float Valve And Plugging Wash Pipe, Complete All As Specified And Directed. 32 Cleaning And Removing All Scales And Dirt Etc. From Tanks And From Mouths Of Circulating Pipes Of Capacity Exc 500 Litres But N Exc 1000 Litres And Refixing The Float Valve And Plugging Wash Pipe, Complete All As Specified And Directed. 33 S&F In Repairs Cabinet Mirror Of Size 450X600Mm, Complete All As Specified And Directed. 34 Taking Down And Refixing Of Shutters In Same Opening After Easing And Adjusting Of Any Description Exc 1 Sqm And N Exc 2 Sqm Each Including Resecuring/Changing Of Builders Hardware, Complete All As Specified And Directed. 35 Taking Down Aluminium Door / Window Shutter Of Any Size N Exc 2.5 Sqm Each And Refixing In The Same Position / Opening After Easing And Adjusting, Tightening Of Joints Or Changes Of Hinges, Screws, Cleats, Beadings, Rubber Gasket Etc, As Per Site Requirement To Make Functional The Shutter, Complete All As Specified And Directed. 36 Taking Down Shutters Of Any Description Size Of Shutter Exc 1 Sqm But N.Exc 2 Sqm And Removing From Site Complete All As Specified And Directed. 37 Taking Down Chowkhats Or Frames With Shutters (Without Taking Off Shutters From The Frames) N Exc. 1.5 Sqm And Credited To The Contractor, Complete All As Specified And Directednote: The Damaged Portion Of The Tiles / Rendering Shall Be Made Good With The Same Material To Match With The Adjacent Surface. 38 Taking Down Chowkhats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exc. 1.5 Sqm But N Exc 4.0 Sqm And Credited To The Contractor, Complete All As Specified And Directednote: The Damaged Portion Of The Tiles / Rendering Shall Be Made Good With The Same Material To Match With The Adjacent Surface. 39 S&F Pressed Steel Frame For Doors With One Rebates Size Of Frame 125X60 Mm Including Necessary Fixing Lungs Hinges Lock Strike Plate Etc. Including Pcc, 1:3:6, Type C-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Back Filling Of Pressed Steel Frame, Complete All As Specified And Directed. 40 S&F Pressed Steel Frame For Doors With One Rebates Size Of Frame 105X60 Mm Including Necessary Fixing Lungs Hinges Lock Strike Plate Etc. Including Pcc, 1:3:6, Type C-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Back Filling Of Pressed Steel Frame, Complete All As Specified And Directed. 41 S&F Anodised Aluminium Powder Coated Door Shutter With Frame (Minimum Thickness Of Powder Coating 50 Micron Of Approved Colour), Partly Glazed With 5Mm Thick Tinted Glass And Partly Panelled With 9Mm Thick Prelaminated Particle Board With Both Side Decorative Laminated Including Rubber Bead Joining Cleat For Fixing In Position, Aluminium Door Handle 150Mm Size, Aluminium Barrel Tower Bolt 200Mm Size, Mortice Lock Etc. All As Specified Below, Complete All As Specified And Directed. (A) Frame (Top & Side) Section Shall Of Size 101.60 X 44.75 X 2.4Mm (Section No 14021)(B) Vertical Members Of Shutter Section Shall Be Be Of Size 85.00 X 44.45 X 2.00Mm (Section No 19560)(C) Top Members Of Shutter Section Shall Be Be Of Size 83.50 X 44.45 X 2.00Mm (Section No 19581)(D) Lock Rail (Middle Member) Of Shutter Section Shall Be Be Of Size 150.00 X 44.45 X 3.00Mm (Section No 19596)(E) Bottom Members Of Shutter Section Shall Be Be Of Size 150.00 X 44.45 X 3.10Mm (Section No 19584) (F) Glazing Clip For Securing Glass Of Shutters Shall Be Be Of 0.80Mm Thick (Section No 19370).Note:- (I) Section No Given Above Are Of Make Jindal, Contractor May Use Similar Section Of Other Make Mention In Appx A(Ii) Floor Door Spring Will Be Measured & Paid Separately. 42 S&F Aluminium Powder Coated Aluminium Window Having Three Track (Minimum Thickness Of Powder Coating 50 Micron) With Aluminium Section 92Mm X 31.75Mm (Weight Bottom Section 1.070 Kg/M, Top Section 0.933 Kg/M, Shutter Section 40Mm X 18Mm (Weight Of Handle Section 0.417 Kg/M) Interlock 0.547 Kg/Rm Mounted On Bearing To Slide On Tracks Plain Anodized In Approved Shade Including Supply And Fixing Of 5Mm Thick Plain Glass And Wire Mesh, Pvc Track Gasket, Epdm Rubber Gasket On Glass Of Weather Tightening Along With Locks, Handle Including Sealing Gap With Marble Surfaces With Silicon Sealants Making It Water Proof In All Manner Etc. Complete All As Specified And Directed. 43 S&F Aluminium Powder Coated Ventilator (Minimum Thickness Of Powder Coating 50 Micron) Having Fixed Glass With Aluminium Section Having Section 50.80Mm X 25.40Mm (Weight 0.489 Kg/M) Glazing Clear Section (Weight 0.109 Kg/M) With Plain Anodized Including Supply And Fixing Of 5Mm Thick Sun / Heat Reflected Glass Making Frame And Glass Water Tightening Making It Good Etc., Complete All As Specified And Directed. 44 S&F For Powder Coated Aluminium Grill (Thickness Or Powder Coating Not Less Than 50 Micron) Of Approved Design / Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass / Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Powder Coated Aluminium Standard Section Around The Opening, Complete All As Specified And Directed. 45 S&F Upvc Windows With, Glass 5Mm Thick Clear Tough + 12Mm Thick A, G+5Mm Clear Toughened, Profile-Mozart Premium, Colour-White, Drainage, Face, Reinforcement Standard, T-Joints, Mechanical /V-Welded, Bead-Default, Mesh-Pull Down, Handle Type Cocksper Handle, Complete All As Specified And Directed. 46 S&F 4.8Mm Thick Sheet Glass Ordinary Quality And Glazing With Aluminium Glazing Clips And Rubber Neosprine Gasket In Square Or Rectangular In Section N Exc 0.5 Sqm In Each Pane, Complete All As Specified And Directed. 47 S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Supplying And Fixing In Opening, Complete All As Specified And Directed. 48 S&F 30Mm Thick Factory Made Solid Pvc Moulded Door Shutter With Wood Free Eps, 28 To 30Mm Thick (Stiles), With 2, 4 Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face And 2Mm Thick Plain Colour Pvc Sheet On Back Face, Suppling And Fining In Frame At Site As Per Specification And Drawing 49 S&F 35Mm Thick 2Nd Class Hardwood, Factory Made, Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc. (Without Sash Bars), Edges Of Framing Plain, Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass, Etc. Sizes Of Members Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A), Complete All As Specified And Directed. 50 S&F 35Mm Thick 2Nd Class Hardwood Plain Framed, Panelled Shutter (Two Panel), Factory Made, With Lock Rail And Panel Of 9 Mm B.W.P. Commercial Ply Or 12 Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is : 1003 (Part I), Kiln Seasoned And Chemically Pressure Treated, Complete All As Specified And Directed. 51 S&F In Repairs 250Mm Mild Steel Helical Door Spring Rat Tail Type Including Collar Plate And Welding If Required Or Otherwise Fixed With Screw On Wooden Frames, Complete All As Specified And Directed. 52 S&F 150Mm Size Aluminium Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Specified And Directed. 53 S&F 100Mm Size Aluminium Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Specified And Directed. 54 S&F 150Mm Size Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed. 55 S&F 100Mm Size Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed. 56 S&F 100Mm Long Medium Weight, Cold Rolled Mild Steel Butt Hinges, Complete All As Specified And Directed.. 57 S&F 100Mm Long Floor Door Stopper Of Aluminium Alloy Body And Tongue With Rubber Cover Ends, Complete All As Specified And Directed. 58 S&F 250Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts, Complete All As Specified And Directed. 59 S&F Mild Steel Wire Cloth 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 In Steel / Wooden Shutter Of Door & Windows, Complete All As Specified And Directed. 60 S&F 3Mm Thick Sheet Glass Ordinary Quality And Glazing With Oil Putty / Wooden Beading In Squares Not Exceeding 0.50 Sqm Including Hacking Old Glass, Complete All As Specified And Directed. 61 S&F Door Strip Comprising Of Aluminium Holds & Rubber Strip Fixed At Bottom Of Door Shutter With Screws, Complete All As Specified And Directed. 62 S&F In Repairs 18-19Mm Thick Block Board, Grade-2 Quality, Interior Grade, Commercial Type, Fixed With Screws To Timber Framework As In Kitchen Drawers, Cupboard Shutters Etc. Complete All As Specified And Directed. 63 S&F 0.90Mm Thick Decorative Laminate Type 1 Of Surface Finish, Colour And Pattern As Approved, Fixed With Approved Adhesive As Per ManufacturerS Instructions, Complete All As Specified And Directed. 64 S&F 30Mm Width Of Flaps Continuous (Piano) Hinges, Stainless Steel, Bright Finish Or Electro Galvanised, Complete All As Specified And Directed. 65 S&F In Repairs 100Mm Long Hasp And Staple, Safety Type, Brass Aluminium Anodized With Mild Steel Hinge Pin Including Bolt To Hinge Plote And Fixed With Screw, Complete All As Specified And Directed. 66 S&F In Repairs Sink With Drainage Board Made Of Stainless Steel 1Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X160Mm, Complete All As Specified And Directed. 67 S&F In Repairs Kitchen Plate Rack Made Of Stainless Steel 1Mm Thick With Plugs Washers As Overall Size Of 900Mm X 975Mm Including Fixing To Wall And All Accessories, Complete All As Specified And Directed. 68 S&F In Repairs 9Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work Or Wall Panelling / Flooring / Ceiling, Complete All As Specified And Directed. 69 Preparation Of New Wood And Wood Based Surfaces Of Any Description Exc 10Cm With Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer, Complete All As Specified And Directed. 70 S&F In Repairs Snap Grid For False Ceiling Of Size 600Mm X 600Mm Grid Exposed Grid System Fabricated With Galvanised Iron Powder Coated Section All As Shown On Serial Page No 185 Of Ssr Part Ii (2020 Print), Complete All As Specified And Directed. 71 S&F 12Mm Thick Perforated Particle Boards Or Tiles For Insulation And Acoustic Purposes, 60Cm X 60Cm In Size, Fixed With Nails To Timber Frame Workorwith Staples On Snap Grid, Complete All As Specified And Directed. 72 S&F 6Mm Thick Non Asbestos Fibre Cement Building Boards Fixed Or Laid/Inserted To Timber /Gi / Aluminium Framework With Screws To Ceiling Flat Or Sloping, Complete All As Specified And Directed. 73 S&F In Repairs 12Mm Thick Wooden Wall Panelling Of Second Class Softwood With Tongue And Groove Joint Fixed In Any Position Over And Including Wooden Framework In Second Class Softwood With Plain Fillets Square Or Sectional Area Exc 13 Sqcm And N Exc 25 Sqcm At N Exc 90 Cm Centre To Centre In Both Direction And Including Two Or More Coats Of French Polishing On All The Exposed Surfaces Wooden Panelling Including Taking Down Existing Electrical Fittings And Re-Fixing The Same, Complete All As Specified And Directed. 74 S&F In Repairs Solid Pvc Wall Lining Consisting Of 5Mm Thick Wood Grain Printed Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame Including 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Panelling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specifications,Complete All As Specified And Directed. 75 S&F In Repairs Decorative Type Wallpaper Of Good Quality Surface Finish, Colour ,Design And Pattern As Required Fixed With Approved Adhesive As Per ManufacturerS Instructions As Approved, Complete All As Specified And Directed. 76 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For, Complete All As Specified And Directed. 77 M&L For Structural Steel Work As In Truss, Rafter Purling, Made Out Of Angle / Hollow Pipe / Tube Section Including Jointing Cleats, Plates Flat Iron, Gusset Plates, Rails, Braces Etc. Conforming To Fe 410-W (Gde-E-250) Quality, Confirming To Is-1161-1979 Of Grade St-240 Complete All As Specified And As Directed. 78 S&F In Repairs 0.63Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugations Side Lap, With L-Type Or J-Type Or Cranked Hook Bolts, In Roofs, Walls Etc. With Grade Of Zinc Coating, Complete All As Specified And Directed. 79 S&F In Repairs Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws, Complete All As Specified And Directed. 80 S&F In Repairs Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws, Complete All As Specified And Directed. 81 M&L For Tightening Bolts And Closing Bolt Holes, Etc. To Rectify The Leakage / Seepage, In Old Roof Of Corrugated Steel Sheets By Sealing With One Bitumen And One Curved Gi Washer On Either Side And 6Mm G.I. Bolts And Nuts If Required, All Set In Stiff White Lead, Complete All As Specified And Directed. 82 Preparing New Zinc (Or Galvanised) Surfaces To Receive Painting Of Any Description Over 10Cm Width Or Girth, By Coating With Mordant Solution Including Washing And Cleaning, Etc. Steel And Iron Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over One Coat Red Oxide Primer, Complete All As Specified And Directed. 83 Preparation Of Old Zinc (Or Galvanised) Steel And Iron Roof Surfaces Of Any Description Over 10 Cm Width Or Girth To Receive Painting, By Coating With Mordant Solution Including Washing And Cleaning Etc. And Applying Two Coats Of Synthetic Enamel Paint, Complete All As Specified And Directed. 84 Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc., Complete All As Specified And Directed. 85 M&L For 18-20Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Jambs, Pillars, Window Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Over And Including 15Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 86 Demolition Of Reinforced Cement Concrete Of Any Description In Any Position Not Otherwise Specifically Provided For, Complete All As Specified And Directed. 87 Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work For Fair Finished Surface, Not Exceeding 200M Thick (Horizontal Or Sloping), Complete All As Specified And Directed. 88 M&L For Reinforced Cement Concrete, 1:2:4, Type B-1 (Using 20 Mm Graded Crushed Stone Aggregate) For Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like, Complete All As Specified And Directed. 89 M&L For Ms Tmt Bars 10Mm Dia And Over, Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hooking For Columns, Hooking Ends And Binding With And Including Mils Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips, Complete All As Specified And Directed. 90 S&F In Repairs 20Mm Dia Decorative Powder Coated Drapery Curtain Rods Of With Bright Finish, Including Decorative Side Domes, Brackets And A Minimum Of 8 Nos Curtain Rings In Per Running Metre Of Length, Complete All As Specified And Directed. 91 Demolition Of Brick Work Or Stone/ Boulder Masonry, Built In Cement Mortar Including All Quoins, Pillars Etc. Complete All As Specified And Directed. 92 M&L For Brick Work With Sub-Class `B Bricks (Using Old Size Bricks), Straight Or Curved On Plan Exceeding 6M Mean Radius Built In Cm 1:6, Complete All As Specified And Directed. 93 Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water Etc., Complete All As Specified And Directed. 94 M&L 15Mm Thick Rendering On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 And Finishing Even And Smooth Without Using Extra Cement Using Integral Water Proofing Compound, Complete All As Specified And Directed. (Wpc Shall Be Measured And Paid Separately). 95 Supply Only Integral Water Proofing Compound, Complete All As Specified And Directed. 96 M&L For Rendering 15Mm Thick On Other Than Fair Faces Of Brick Or Concrete Surfaces In Cement Mortar 1:6, Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 97 Preparation Of New Surface Of Wall And Applying Two Coats Of Cement Base Paint Over One Coat Of Primer, Complete All As Specified And Directed. 98 Preparation Of New Plastered Surfaces Of Walls And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Alkali Resistant Primer, Complete All As Specified And Directed. 99 M&L For Lagging To 15Mm Bore Pipes Used In External Water Supply Or Plumbing All Around With 50Mm Thick Bonded Mineral Wool Pre-Formed ‘Snap On’ Pipe Sections Of Density 144 Kg /Cum Conforming To Is 9842 Provided With Chicken Mesh Wire Netting 25Gauge 20Mm Mesh Including Applying With Brushing Neat Cement Slurry With 3 Kg Of Cement Per Sqm Including Taking Down Of Old Lagging If Required, Complete All As Specified And Directed. 100 M&L For Lagging To 20Mm Bore Pipes Used In External Water Supply Or Plumbing All Around With 50Mm Thick Bonded Mineral Wool Pre-Formed ‘Snap On’ Pipe Sections Of Density 144 Kg /Cum Conforming To Is 9842 Provided With Chicken Mesh Wire Netting 25Gauge 20Mm Mesh Including Applying With Brushing Neat Cement Slurry With 3 Kg Of Cement Per Sqm Including Taking Down Of Old Lagging If Required, Complete All As Specified And Directed. 101 S&F In Repairs 75Mm Dia Pvc (Swr) Soil Waste And Vent Pipes Single Socketed In Any Length With Rubber Ring Joints, Laid In Trenches Or Fixed To Walls, Complete All As Specified And Directed 102 S&F In Repairs 110Mm Dia Pvc (Swr) Soil Waste And Vent Pipes Single Socketed In Any Length With Rubber Ring Joints, Laid In Trenches Or Fixed To Walls, Complete All As Specified And Directed 103 M&L For Cleaning Surface Of Sunken Portion Wall / Bottom And Applying Cement Slurry @1.2 Kg Per Sqm And Applying 15Mm Thick Cement Plastred In Cm 1:3 Finished Even And Fair Using Extra Cement And Applying Two Coats Of Acrylic Polymer Modified Cementious Slurry As Per Manufactureas Instruction To Make The Surface Leak Proof, Complete All As Specified And Directed. 104 S&F In Repairs Vitreous China Wash Down Water Closet Pan (Pedestal Pattern), White (Excluding Flushing Cistern ) Including Connection To Drain (Or Outgoing Pipe) And To Flushing Pipe, Antisyphonage Pipe, Pvc Cover Sheet In Same Colour Etc., Complete All As Specified And Directed. 105 Dismantling Of Floor Hearth Or Wall Tiling Including Cement Mortar Bedding But Not Backing Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. 106 Demolition Of Cement Concrete In Ground Floors And Pavings N Exc 15Cm Thick (Below Or Above Ground Level), Complete All As Specified And Directed. 107 M&L For 25Mm Thick Plain Cement Concrete, 1:2:4, Type B-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Sub Base Of Floor Finish Even And Rough To Receive Further Floor Finishes (Tile/Kota Stone/ Marble ), Complete All As Specified And Directed. 108 M&L For 100Mm Thick Plain Cement Concrete, 1:2:4, Type B-1 (Using 20Mm Graded Crushed Stone Aggregate) As In Flooring , Laid In Alternate Bays And Finishing The Surface Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 109 M&L For Non Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square / Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match Over And Including 15Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 110 M&L For Glazed Ceramic Tile 300X600X06-7Mm Thick (Coloured) On Vertical Surfaces Such As Wall, Dados Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Shade Of Tiles Over And Including 10Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 111 M&L For Light Shade Vitrified Ceramic Tiles 8 To 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15 Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 112 M&L For Light Shade Vitrified Ceramic Tiles 8 To 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10 Mm Thick Backing Coat Cm 1:4, Complete All As Specified And Directed. 113 M&L For 75Mm Thick Plain Cement Concrete, 1:4:8, Type D-2 (Using 40 Mm Graded Crushed Stone Aggregate) As In Sub Base, Complete All As Specified And Directed. 114 M&L For 100Mm Thick Plain Cement Concrete, 1:4:8, Type D-2 (Using 40 Mm Graded Crushed Stone Aggregate) As In Sub Base, Complete All As Specified And Directed. 115 M&L For 10Mm Thick Vitrified Parking Tiles Heavy Duty, Exterior Grade, Textured Finished Of Size 300X300Mm Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:4, Complete All As Specified And Directed. 116 M&L For Chequered Cement Concrete Tiles Size 300 Mm X 300 Mm X 22-25Mm Thick With Grey Cement And Pigment , Rubber Moulded With Laquer Polish For Extra Shine, Isi Marked, Coloured, Set Jointed And Pointed In Neat Cement Slurry Over And Including 20Mm Thick Screed Bed In Cm 1:6, Complete All As Specified And Directed. 117 M&L For Strong Silicone Sealant Suitable For Roof Leak Hole, Metal Leak, Gap Filling Etc. Hole Size N Exc 5X5Mm Including Necessary Fitting And Scaffolding Height Upto 15M, Complete All As Specified And Directed. 118 S&F In Repairs Pvc Syphon Kit For One Piece, Complete All As Specified And Directed. 119 S&F In Repairs One Piece Closet Seat Cover Closed Pattern With Flat Bottom Cover And Mild Steel Chromium Plated Or Aluminized Hinging Device, Complete All As Specified And Directed. 120 S&F In Repairs 100Mm Dia Cp Grating Doom, Complete All As Specified And Directed. 121 Deduction To Be Made From Boq For Schedule A Part-Ii (Credit Schedule From Dismantling / Taking Down Items) Worth Rs 65,905.00 During Aoc.(Note :- Tenderers Shall Not Quote For This Schedule) Please Enable Macros To View Boq Information
Contract Date: Jun 29, 2026 Contract Value : ₹ 19.33 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Jammu And Kashmir View Result →
Maharashtra View Result →
13.
Housing Urban and Rular Development #11250041 AOC
Providing And Supplying Furniture To Sub Divisional Officer Office At Collector Office Nandurbar Tal. Dist. Nandurbar (Dpdc-2053 A322)-Executive Table 2.0002 Free Standing Table 8.0003 Credestal 4 Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery 5 Providing & Arrangemnt of Mid Back, ECO CTS Mechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery 6 Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) 7 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. 8 Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) 9 Providing and fixing decorative teak plywood veneer lining 4 mm thick with backing of teak wood frame work of battens 12 mm X 25 mm at 30 cm center to center fixed to walls and pillars with 12 mm thik phywood building without skirting and cornice as per drawings including necessary iron work and finishing the exposed wood work with french polish etc. complete. 10 Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed. 11 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. 12 Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat 13 Medium Height Partition @ 1800/1200HT TILE BASED PARTITION SYSTEM Tile based Aluminum partition system of 1800/1200mm ht. made of 60mm thick aluminum frames having two separate race ways for laying electrical & computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 pan-head machine screw and washer with aluminum post cover. Post cover snap on fashion to be connected on aluminum connector visible aluminium to be in anodized / powdercoated finish. The top exposed sides of the frame and posts should be covered with horizontal/ Vertical trim and caps made of Aluminum in anodized /powdercoated finish in order to enhance its look. Upper tiles on the partition to be in Soft Board or Marker or prelaminated partical board tile of 9mm. thk., prelaminated partical board lower tiles in laminate finish 9mm. thk. on both the sides.Size: 1200/1800mm (H) 14 Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 15 Book Case with Glass Shutter @ 825Lx300Dx1650HT Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing. 16 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete 17 Full Height Steel Storage @ 750LX450Dx2100HT Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. 18 Wardrobe with Mirror @ 900LX 600DX 1965H Providing and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required.19 Providing and fixing decorative teak plywood veneer lining 4 mm thick with backing of teak wood frame work of battens 12 mm X 25 mm at 30 cm center to center fixed to walls and pillars with 12 mm thik phywood building without skirting and comice as per drawings including necessary iron work and finishing the exposed wood work with french polish etc. complete. 20 Providing & Fixing in position, Carpet more than 800+ gsm, made with 100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete
Contract Date: Jun 08, 2026 Contract Value : ₹ 14.79 Lakh
Government Departments No of Bidders 6
Maharashtra View Result →
14.
Law and Justice #11233001 AOC
Bids Are invited for Furniture Work In Control Room Nch Sofa - Providing And Supplying Of Customised Sofa , Desk - Providing And Supplying Customized Wooden Desk , Drawers - Providing Customised Side Storage With Laminate Finish Including Shelves Drawers , Plank - Providing And Supplying Of Customized Wooden Tile Base Plank , Door Frame - Providing And Fabricating Of Customised Wooden Frame For Door Made Out Of Plywood , Window Frame - Providing And Fixing In Position New Aluminium Glazed Window With Frame Including Jali And Louver Fixing Aluminium Frame , Storage Unit - Providing And Fixing Customized Wooden Full Height Storage With Shutters With Laminate Finish , Wall Panelling - Providing And Fixing Customized Decorative Wooden Panelling Work With Melamine Finish , Door - Providing And Fixing Of Customized Main Entrance Wooden Door With Glass Panel , Fan - Providing And Fixing Of Exhaust Fan Total Quantity : 449
Contract Date: Ref. Documents Contract Value : ₹ 9.97 Lakh
Government Departments No of Bidders 7
Maharashtra View Result →
15.
Law and Justice #11232981 AOC
Bids Are invited for New Cabin No 2 For Assisstant Commissioner Of Customs Nch Executive Table - Providing Executive Table In 18 Mm Thick Ply With Soft Board Fitted Finished In 1 Mm Thick Laminate With Bwr Ply Board Shutters On Side Runner Storage In 18 Mm Thick High Gloss Laminate With Bwr Ply Board Shelve Inside Side Storage In 18 Mm Thick High Gloss Laminate , Side Table - Providing One Side Table In 18 Mm Thick Ply With Soft Board Fitted Finished In 1 Mm Thick Laminate. , Drawers - Providing Drawer Pedestal Includes Fabrication Of A Storage Unit Using Commercial Plywood Or Mdf With Laminate Or Veneer Finish Complete With 2 Or 3 Drawers , Cabin Partition - Cabin Partition Work Includes Providing And Fixing Partitions Using Aluminium Or Ms Framework With Glass Laminate Or Gypsum Board Panels , Table Glass Top - Providing And Fixing Of Table Top Glass In Required Size And Thickness As Per Site Conditions , False Ceiling - False Ceiling Work Includes Providing And Fixing A Modular Or Grid Ceiling Using Gypsum Board Or Pvc Panels With A Powder Coated Aluminium Or Gi Framework , Wooden Door - New Door Providing And Applying 40 Mm Thick Block Pine Board For The Door Finished With High Quality Decorative Laminate , Wooden Flooring - Providing And Installing Wooden Flooring Featuring High Quality Wooden Planks With A Textured Durable Carpet Finish , Wall Panelling - Wall Panelling Work Includes Providing And Fixing Panels Made From Commercial Plywood Or Mdf With Laminate Veneer Or Fabric Finish , Electrical Work - Providing And Installing Complete Electrical Works Including Led Panel Lights 2 By 2 Fan Wiring Switches Sockets And Other Necessary Electrical Components , Executive Chair , Visitors Chair , Sofa Total Quantity : 622
Contract Date: Ref. Documents Contract Value : ₹ 7.98 Lakh
Government Departments No of Bidders 7
Maharashtra View Result →
16.
Housing Urban and Rular Development #11229363 AOC
Misc. Repairs And Other Civil Works Of Tiles, Doors, Windows,Wooden Flooring, Shed And Internal And External Painting In C.M. Bunglow Civil Line Nagpur.(Only For Society).-= 1 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand 2 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 3 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. 4 Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 1190 to 1202 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) Flooring 5 Providing and laying Vitrified MATT finishhaving decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical andconfirmingtoIS15622-2006(GroupBla)ofapprovedmakeshadeandpatternfor flooringinrequiredpositionlaidonabedofbondingchemicalfillingjointscuringand cleaning etc .complete. 6 Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 7 Providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 8 Providing and fixingTable top white wash basin of size 120x635x405mm rubber plugs and brass chain, withpillar cock, C.P.Angular stop cock long thread, continentalincluding S.S. bottle trap of approved make havingnecessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge. 9 ProvidingandapplyingTextureplasterwithfinishingwithtexturematerial ofapproved makein 3 to 4 millimeterthickness on previously plastered surface, including Plaster Groove 6mmthicknessorTapeGrooves35to45mmthicknessorasrequired,inallposition including preparing the surface, scaffolding etc. complete. 10 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box 11 Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand. 12 Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm 13 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 14 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etccomplete 15 Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete.b) Granite 16 Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. 17 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. 18 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc.as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete.Spec. No. : As directed by Engineer-in-charge. 19 Providing and fixing acrylic plastic sheet panels of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doors/windows including providing and fixing clips, putty etc. complete. (a) 2.00 mm thick. 20 Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. 21 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. 22 Removing W.C. Pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the service-able materials as and where directed includingthrowing the unserviceable materials out side etc. complete. 23 Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 24 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. 25 Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. 26 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 27 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 28 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 29 Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 30 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. 31 Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. 32 Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalentcontinental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. 33 Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. 34 Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete 35 Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. 36 Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. 37 Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipal requirement etc. complete. 38 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres 39 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. 40 Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover. 41 Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover etc. complete. 42 Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent ?make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. 43 Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete 44 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. 45 Providing and fixing crimped with G.I. mesh and size 20 mm x 20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc.complete ( excluding cost of structural steel) 46 Transportation of material obtained from debris of various sorts including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed. 5 km leadloading unloading 47 Providing , laying and fixing ,jointingEco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. 48 Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 kg) 49 Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete.Medium duty (100 kg) 50 Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaningetc. complete. (using 100% crushed sand) 51 Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards,screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. 52 Providing and fixing Shutter to wall Cupboard consisting of Teak Wood styles and Rails 25 mm thick and 75 mm wide with panel insert of 12 mm thick particle Board with one approved coloured Laminated Face on one side 1.5 mm thick, bonded with Phenol Formaldehyde Synthetic Resin including Lipping Beading. Iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). 53 Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 90 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete.(excluding painting to underside of plank). 54 Providing and fixing C.P. 2 Way BIB cock with wall flange of approvedmake including necessary sockets/ union nut etc. complete as directed by Engineer in charge. 55 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) 56 Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete 57 Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete. i)Tank capacity up to 2,000 litre. 58 Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete 59 Replacement of damaged Mortise Lock of approved quality and make to door shutter including Removing and Refixing with Necessaryscrew, making proper adjustment for smoothoperation etc. complete as per sample approved by Engineer in-chareg. 60 ProvidingHydrulic door closer .... 61 ProvidingSuper Jet Spry with flange 2 in 1 faucet 1.50 mtr long. 62 Providing Skilled plumber with tools as per direction of Engineer Incharge. 63 Providing skilled carpentor with tools as per direction of Engineer Incharge 64 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface and including scraping etc. complete. 65 Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 66 Providing and applying single coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. 67 Providing and fixing sheet glass of 24 oz. for all size including putty etc. complete 68 Providing and fixing high level 10 liter capacity with fittings inlet PVC pipe with stop tap ,brackets for fixing the cistern,32 mm dia. PVC flush pipe with fitting and clamps 20 mm dia. PVC overflow pipe with mosquito proof couplings, galvanised iron chain and pulley painting if ordered to cistern pipe etc. and cutting and making good the damaged wall and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) 69 Manualy clearing the chockes from under ground drainage line including Inspection chambers with the help of required tools for propre functioning line chamber to chamber etc. complete. 70 Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etc. complete 71 Providing curtain rod dropping with channel MAC brand of superiar quaility including all required material labour etc complete. as directed by engineer incharge......... 72 Replacement of damaged alluminium Butt Hinges of 125 mm of approved quality and maketo door shutter including removing existing the same inoriginal position making prope radjustment for smooth operation etc. complete as per sample approved by Engineer incharge. 73 Replacement of damaged Aldrop 300 mm Chromium plated of approved quality and maketo door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. 74 Replacement of damaged Tower Bolt 300 mm Chromium plated of approved quality and maketo door/window shutter including removing existing the same inoriginal position making proper adjustment for smooth operationetc.complete as per sample approved by Engineer in-charge. 75 ProvidingHandle 150 mm Chromium plated (Rounded shape). 76 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixedwithapprovedwaterproofingcompound.Markingfinishedsurfacewithfalse squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for requiredheight,withdripmouldatthejunctionofplasterandparapetandcuringand covering10yearsGuaranteeagainstleakproofnessonCourtfeestamppaperofRs.500/- including ponding test etc. complete. 77 Providing and injecting epoxy grout including structuring of crack in the body of slab girder by sand blasting, fixing inlet tube arrangement including cost of materials, machinery required for the work and labour charges etc. complete. 78 Providing & fixing Decorative wall paper superior quality including adhesive to fix at wall etc complete. as directed by engineer incharge......... 79 Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) 80 Providing & fixing Mica laminate as per ISI 0.1 mm thick etc complete...... 81 Providing & fixing 19 mm plywood 710 bwp full red core with report etc complete...... 82 Providing & fixing 12 mm plywood 710 bwp full red core with report etc complete...... 83 Providing & fixing teak wood batterns 50x25 mm etc complete...... 84 Providing & fixing plain glass 6 mmetc complete...... 85 Providing & fixing teak wood batterns 70x45 mm etc complete...... 86 Providing & fixing door stopper etc complete...... 87 Manualy clearing by removeing the chockes from Nahni Trap, Gully Trap, Wash basin unit, Sink and WC with the help of required tools for proper functioning the same etc. complete. 88 Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. 89 Providing and Laying wearing laminate wooden or eqiuvalent flooring 8 mm thick in attractive strips for conference hall. 90 Providing, laying andfixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 kg/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring. 91 Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. 92 Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with allnecessaryfixturesandfittingetc.complete.(SampletobefinalbyEngineerIn-charge prior execution of work) 93 Providing and applying French polish for required finish on previously polished wood including knotting, preparing the surfaces, scaffolding etc. complete as directed 94 Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary. 95 Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 96 Providing and fixing C.P. sink cock with raised J shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete. 97 Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete. 98 Providingandlayingtelephoneblack/AmbaWhite/Cadburybrown/Rubyred/Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,etc. complete. 99 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. 100 BASIC TEST OF CEMENT :-Standerd Consistancy Fineness, Specific Graviti, Setting Time (Initial & final, Compressive Strength, Soundness. 101 BASIC TEST OF BRICK :-Water Absorption, (Set of 5 Brick), Comoressive Strength (Set of 5 Blocks), Efflorescence (Set of 5 Bricks) 102 CERAMIC TILES/ VITRIFIED TILES :- Water Absorption, Modules of Rapture (Set of 6 Tiles) 103 BASIC TEST OF C. C. TILES. :-Flexural test(Set of 6 tiles) Water Absorption,(Set of 6 tiles) Resistance to wear(Set of 6 tiles). 104 BASIC TEST OF Fine Aggregate Fineness Modulus (Sieve Analysis) silt and cley content..... 105 BASIC TEST OF Concrete Paving Block :- Compressive strength, Water Absorption, (Set of 8 Blocks ) 106 BASIC TEST OF STONE / RUBBLE/ Crushing Value/Compressive strengh, Water 107 Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction materials for whichroyalty is necessary.(Royalty charges will be paid to contractor after sumbitting valid documents of revenue authority)Royalty for naturalSand (Royalty + Surcharges 2% & Distt. mineral foundation cess 10%)
Contract Date: Jun 04, 2026 Contract Value : ₹ 15.18 Lakh
Government Departments No of Bidders 2
Maharashtra View Result →
17.
Educational and Research Institute #11223212 Technical Bid
Tender For Supply And Fixing Of Mechanical Engineering Research Laboratory Furniture(Rp-157) Of New Academic Block At Smvd University, Kakryal, Katra , Research Lab, Mechanical Engineering, Smvd University Katra , Table For Cabin - Providing And Placing Of Main Table With Overall Size Of Table Shall Be 1500 Width Mm X 750 Depth Mm X 740 Height Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 660Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. Dimensions Tolerance + 20 Mm. , Table For Faculty Cabin - Providing And Placing Of Main Table With Overall Size Of Table Shall Be 2000 Width Mm X 750 Depth Mm X 740 Height Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 660Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel Having To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor.Dimensions Tolerance + 20 Mm. , Chair For Cabin & Faculty Rooms - Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing Medium Back Chair. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Malaysian Plywood With Hr Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Double Layered Malaysian Moulded Hot Pressed Plywood (12+6)Mm Thick With Hr Polyurethane Foam 30Mm Thick Having Density 32Kg/M³ Upholstered With Leatherite Tapestry In Black Colour With 0.8Mm Thick And 535 Gsm. Seat And Back Shall Be Joined With Hr Steel Sheet. The Armrest Shall Be Used Pp Arm Fixed Type Completely Joint With Seat. The Chair Shall Have Synchro Knee Tilt Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustable 100Mm With Bifma Standard Class-3 Gaslift. The Pedestal Shall Be Made Up Of Injection Moulded Black Nylon Having Pitch Circle Dia 700 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self Lubricating Property For Friction Free Movemen With Bifma Standards. The Seat Size Shall Be 480±10Mm(W) X 495±10Mm(D) And Back Size Shall Be 590±10Mm(H) From Seat & Overall Height = 1030±10Mm. Dimensions Tolerance + 20 Mm. , Executive Table For Cabin 3 - Supplying & Installing Of Table With Eru And Pedestal Having Following Specifications. The Table Shall Be Supplied In Completely Knock Down Conditions With An Overall Size W1800 X D1800 X H750mm That Is To Be Assembled At Site. The Worktop Shall Have The Size 1800 X 900Mm Made Up Of 50Mm Thick Plpb With Approved Laminate And Finish As Per Approved Shade. The Top Edge Should Cladded With 1.2Mm Thick Extruded Aluminium Section All Around The Worktop And Die Cast End Caps On Joints For Better Strength Of The Table. The Profile Shall Be In Rectangle Shape And Enclosed By Flapper Box For Electric Provision. The Top Shall Be Supported On Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be 50Mm Thick Medium Density Fibre-Board Linear In Profile And The Edges Cladd With Extruded Aluminium Profile. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Particle Board And Shall Be Linear In Profile. The Table Shall Be Supplied With Credenza Unit With An Overall Size 900Mm X 450Mmmm That Shall Be Constructed From Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With 25Mm Thick Top And Other Parts 18Mm Thick Like Shutter, Back, Facia Etc. The Drawer And Shutter Shall Be Operated With Ball Bearing Sliding Channel And Concealed Crank Hinge. G-Profile Aluminium Handle Shall Be Supplied For Ease Of Opening. The Eru Unit Shall Be Mounted On 38Mm Dia. Leg. Fixed Pedestal Shall Be Supplied With An Overall Size 380Mm X 400Mm X 600Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Top Shall Be 25Mm Thick, Side, Back, Facia Shall Be 18Mm Thick. The Pedestal Shall Have 2 Nos. Of Drawer Having Same. The Drawer Shall Be Operated With Ball Bearing Sliding Channel To Enable Smooth Operation. Aluminium Handle Shall Be Provided For Ease Of Opening. For Locking Provision Central Lock Mechanism Shall Be Given In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted On Aluminium Round Leg. Dimensions Tolerance + 20 Mm. , Executive Chair For Cabin 3- Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50+25+30)Mm Thick Having Density (40, 32 & 32)Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Hydraulic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 710±10 Mm(H) From Seat. Overall Height Shall Be = 1170±10 Mm & Overall Width/Depth = 740±10 Mm.. Dimensions Tolerance + 20 Mm. , Visitor Chair For Cabin 3 - Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50+25+30)Mm Thick Having Density (40, 32 & 32)Kg/M³ In Seat And (30+25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Powder Coated 50-60? (Dft) Thick Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 480±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 520±10 Mm(W) X 580±10 Mm(H) From Seat. Overall Height Shall Be = 1030±10 Mm, Overall Depth = 620±10 Mm & Overall Width = 620±10 Mm. Dimensions Tolerance + 20 Mm. , 2-Seater Sofa For Cabin 3 - Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm & Overall Height = 800±10 Mm. Dimensions Tolerance + 20 Mm. , Centre Table For Cabin 3 - Providing And Supplying Centre Table With An Overall Size 1200Mm X 600Mm X 430Mm. The Top And Side Cladding Shall Be Made Up Of 36Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. Extruded Aluminium Section Shall Be Inserted Within Side Corner Edge At Both Side Of The Table. There Shall Be Leveller Shoe Provided At The Bottom. Dimensions Tolerance + 20 Mm. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso: 9001, Iso:50001, Iso:14001 & Iso: 45001 By Nabcb, Bifma Membership, Aiota & Greenguard Certification Has To Be Submitted. , Corner Table For Cabin 3 - Providing And Supplying Centre Table With An Overall Size 600Mm X 600Mm X 430Mm. The Top And Side Cladding Shall Be Made Up Of 36Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. Extruded Aluminium Section Shall Be Inserted Within Side Corner Edge At Both Side Of The Table. There Shall Be Leveller Shoe Provided At The Bottom. Dimensions Tolerance + 20 Mm. , Wooden Almirah For Cabin Faculty Room & Hall - Supplying & Placing Storage Unit With An Overall Size 900Mm X 450Mm X 2000Mm. Storage Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 3 Nos. Of Adjustable Shelf And 1 Fixed Shelf. 2 Normal Shutter And 2 Glass Shutter Shall Be Provided For Closing And Opening The Shutter. The Glass Shutter Shall Be Made 4Mm Clear Glass Insert Within Aluminium Profile. The Shutter Shall Be Operated With Concealed Crank Hinge With Ss Handle As Well As Mp Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. Dimensions Tolerance + 20 Mm. , Steel Almirah For Cabin Faculty Room & Hall - Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. All Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. Dimensions Tolerance + 20 Mm. , Steel Bookcase For Cabin & Faculty Room - Providing And Supplying Metal Book Case With An Overall Size 915 Mm (W) X 320 Mm (D) X 1750Mm (H). The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. All Components Shall Be Made Of 0.8Mm High Yield Strength Crca Sheet Of Grade ‘D Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure.Dimensions Tolerance + 20 Mm. , Visitor Chair For Cabin & Faculty Rooms - Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support With The Assistance Of Cushion. The Armrest Shall Be Cushion Arm With Leatherite Covering. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Circular Pipe Having Dia. 28.6Mm. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Seat Size Shall Be 480±10 Mm(W) X 460±10 Mm(D) And Back Size Shall Be 460±10 Mm(W) X 580±10 Mm(H) From Seat & Overall Height = 1020±10 Mm, Overall Width = 610±10 Mm & Overall Depth = 670±10 Mm. Dimensions Tolerance + 20 Mm. , Modular Conference Table - Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size 2400Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Have Same Size Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With One Side Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. Single Sided Flapper Box Shall Be Enclosed At Table Top That Houses Video, Audio, Data And Power Connection Discretely. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Have The Size 900Mm X 570Mm. The Gable End Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Be Supported On Ss Pipe Leg 202 Grade. It Shall Have Cross Section Area 80Mm X 20Mm. There Shall Be Buffers Provided To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. Table Shall Be Provide A Flip Up/ Pop Up Box (Without Wires) 01 No. Dimensions Tolerance + 20 Mm. , Main Chair For Conference Table - Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of Natural Wood And Combination Of (18+6)Mm Thick Double Layered Moulded Commercial Plywood Padded With High Resilience Polyurethane Foam 70Mm Thick Having Density 40Kg/M³ In Seat And 70Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Chrome Cushion Arm With Leatherite Covering Top Pivot Joint With Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded Polypropylene With Chrome Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 500±10 Mm(W) X 720±10 Mm(H) From Seat. Overall Height Shall Be = 1180±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 710±10 Mm. Dimensions Tolerance + 20 Mm. , Chairs For Conference Table - Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of Natural Wood And Combination Of (18+6)Mm Thick Double Layered Moulded Commercial Plywood Padded With High Resilience Polyurethane Foam 70Mm Thick Having Density 40Kg/M³ In Seat And 70Mm Thick Having Density 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Lumbar Support. The Chair Shall Be Supplied With Polypropylene Chrome Cushion Arm With Leatherite Covering Top Pivot Joint With Back. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Injection Moulded Polypropylene With Chrome Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma X5.1-2011 Standards Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 500±10 Mm(W) X 520±10 Mm(H) From Seat. Overall Height Shall Be = 980±10 Mm, Overall Depth = 670±10 Mm & Overall Width = 710±10 Mm. Dimensions Tolerance + 20 Mm. , Discussion Table- Supplying & Placing Conference Table In Completely Knock Down Conditions With An Overall Size Dia. 900Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Circular Shape And The Edges Shall Be Sealed With 2Mm Thick Pvc Edge Banding. The Table Understructure Shall Be A Combination Of Ms Powder Coated And Pre-Laminated Particle Board. There Shall Shoe Provided At The Base To Avoid Scratches On The Floor. Table Shall Be Provide A Flip Up/ Pop Up Box (Without Wires) 01 No. Dimensions Tolerance + 20 Mm. , Chair For Discussion Table - Supplying And Placing Lounge Chair. The Seat Shall Be Made Of 12 Mm Thick Hot Pressed Plywood Upholstered With High Resiliance Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ With Leatherite Tapestry 0.8Mm Thick 535 Gsm And The Back Shall Be Made Of Wooden Frame Upholstered With High Resiliance Moulded Polyurethane Foam 25Mm Thick Having Density 32Kg/M³ With Leatherite Tapestry 0.8Mm Thick 535Gsm. The Frame Structure Shall Be 4 Legs Support Type Made Up Of Reducing Pipe Frame Powder Coated Tubular Pipe Having Cross-Section Area Dai 19Mm Thick. The Seat Size Shall Be 430±10 Mm (D) X 450±10 Mm (W) And Back Size Shall Be 500±10 Mm (W) X 400±10 Mm (Ht) From Seat. Overall Height Shall Be = 840±10 Mm, Overall Depth = 540±10 Mm & Overall Width = 580±10 Mm. Dimensions Tolerance + 20 Mm. , Modular Workstation For Hall - Supplying & Placing Modular Workstation In Completely Knock Down Conditions With Size :- W1200 X D600 X H750/1200Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure. The Worktop Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Re Lam Particle Board With Laminate And Sealed With 2Mm Thick Pvc Edge Banding. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Plpn. Partition :- 60Mm Thick Panel Based Partition Of Height 1200Mm Having Provision Of Fabric / Soft Pin Up Board/ Laminate / Race Way. Worktop :- 25Mm Thick Plpb Board With Pvc Edge Banding. All Aluminum Parts Shall Be Pretreated And Duly Powder Coated Of 40?-50? Thick. Raceway Shall Be Provided Of Aluminum Below The Work Top As Per Requirement For Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Curve Trims. The Trims Shall Be Made Of Aluminum Extrusions Of Size 60X19mm With 1.5Mm Thick And Should Be Covered With Die Cast End Caps On Joints, 2 Ways, 3 Ways & 4 Ways Caps As Required. Wire Management Partition Shall Have Concealed Wire Management Capabilities And Shall Be Engineered For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cutouts Shall Be Provided On Raceways To Fix All Electrical And Data Points. Mobile Pedestal :- (2D + 1F) 18Mm Thick Plpb Board With Pvc Edge Banding, Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. A Nylon Castor Based Cpu Unit Shall Be Provided With 18Mm Thick Plpb. Dimensions Tolerance + 20 Mm. , Chair For Workstations - Providing And Supplying Medium Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ With Foam Net Tapestry 0.9Mm Thick And 300 Gsm And The Back Shall Be Made Of Injection Moulded Polypropylene Net Cover Upholstered With Breathable Mesh Tapestry. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine With Adjustable Lumbar Support. The Chair Shall Be Supplied With Injection Moulded Pu Adjustable Arm Completely Joint With Seat. For Seating Durability The Chair Shall Have Actice Bio-Synchro Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Beinjection Moulded In 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 520±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 495±10 Mm(W) X 610±10(H) From Seat & Overall Height = 1010±10 Mm. Dimensions Tolerance + 20 Mm. The Participating Brand Must Have All The Prevalent Quality & Safety Related Certifications Like Iso: 9001, Iso:50001, Iso:14001 & Iso: 45001 By Nabcb, Bifma Membership, Aiota & Greenguard Certification Has To Be Submitted. , 2 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 2 Locker Unit. Each Locker Shall Have 1 Nos. Of Hanging Rod. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , 3 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 3 Locker Unit. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , 4 Door Lockers For Hall - Providing And Placing In Position Personal Locker Unit Shall Be Of Dimensions 380Mm(W) X 450Mm(D) X 1800Mm(H) Having 4 Locker Unit. Locking Shall Have Cam Lock With Lock Lever Plus Option. Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. Dimensions Tolerance + 20 Mm. , Lab Over Head Unit- Providing And Fixing Lab Over Head Unit With Overall Dimensions 750(W)Mm X 320(D)Mm X 675Mm(H). Over Head Unit Shall Be Welded Body With Load Bearing Members Such As Top, Bottom And Stiffeners Made Of 0.8Mm Thick Crca Sheet. The Storage Unit Shall Be Provided With A Shelf Made Of 0.8Mm Thick Crca Sheet. Each Shelf Shall Have Load Carrying Capacity Of 30-40 Kgs. Mp With 180 Degree Cam Lock. Semi Recessed Handle And Ss Hinge. Shutter Shall Be Provided With A Mp Lock. , Laboratory Lab Stools- Providing And Placing In Position Ht. Adjustable Stool With Back. The Seat Shall Be Made Up Of 1.2±0.1Cm Thick Flat Plywood And With Moulded Polyurethane Foam And Are Upholstered With Replaceable Synthetic Leather Covers. The Dimensions Of Seat Shall Be Diameter 40.0 Cm And Adjustments Are 360° Revolving Type. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Upholstery Shall Be Available In Synthetic Leather. The Dimensions Of Back Shall Be 45.0 Cm (W) Covered With Polyurethane Foam. The Hr Polyurethane Foam Shall Be Moulded With Density = 40 +/-2 Kg/M3. The Five-Prong Pedestal Shall Be Fabricated From 0.2 ± 0.02 Cm Thick Hr Sheet ( Is : Dd 1079/ Hr ), Powder Coated ( Dft 40-60 Microns ). The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Dimensions Tolerance ±20 Mm.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Jammu And Kashmir View Result →
18.
Housing Urban and Rular Development #11201692 AOC
Bids Are invited for 12 Seater Reading Table for Library @ 3600 L x 1200 D x750 HT :- Providing and Fixing 12 Seater Reading Table for Liberary @ 3600 L x 1200 D x750 HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. , Study Table @ 900 L X 600 W X 750 H in MM Providing and fixing Study Table of Size 900 L X 600 W X 750 H Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and Modesty to the leg. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Storage Drawer shall be of min. 1 mm CRCA sheet with two Drawer , Smooth sliding Telscopic Channel with Central Lock & Handle . All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Suitable Folding Space Saving MS Chair to be provided ... Complet , Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Book Case with Glass Shutter @ 825Lx300Dx1650HT:- Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Providing & Arrangemnt of Mid Back, (Visitors Chair) Normal Syncro Mechanism,Fixed Armrest, Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery , Free Standing Table@ 1500 L x 600 D x750 HT :-Providing and fixing Table of Size 1500 L x 600 D x 750 mm. HThk. mm. PVC Top: edge made bands from glued 25 mm by hot melt Prelaminated glue applied Partide by board. auto All edge edges banding are covered machine. by 2 Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color, CPU TROLLEY:-Metal Powder Coated -Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle , Single Bed @ 2025LX 1000DX 650H :- Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: -The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. , Pinup board of size 1200 L x 400 H x 100 D in MM :- Providing and fixing Pinup board of size 1200 L x 400 H x 100 D - All Made out of 18 mm Commercial plywood duly pest with hot press machine with 1.5 mm laminate with all sides covered with edge band having front Clear Glass sliding lockable door and Soft board with required fabric for Pinup with Suitable Wall Fixing Bracket arrangement - Complete , Bunk Bed @ 2015 L X 920 W X 1650 H in MM :- Providing and fixing Bunk Bed of Size 2015 L X 920 W X 1650 H Understructure: - The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Matress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Quitable min. , Dinning Table 8 Seater @ 2300 LX 800 W X 750 H in MMProviding and fixing Dinning Table 8 Seater of Size2300 L X 800 W X 750 H with Folding Space Saving Stainless Steel Stool Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Diining Table Top shall be of min. 2 mm Stainless Steel Sheet with all edges & Covers to be properly failded & rounded for the sefety of students. Eight numbers of Foldable Stool Of Min. Dia 300 mm Stainess Steel to be provided with the help of Stanless Steel Hinges & MS 46 mm Leg work with Suitable Bottem rest for stool Stability. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT... Complet , Mattress Suitable for Bunk bed Providing and Sqplying Mattress with size 0.85 x 1.7 x 0.10,Material useing 25mm rubber rise 100 density 75 mm FR grade foam & cotton coated fabric ect. , Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).a) First FloorGF SickRoom (2 x2x 1.9 x 2.2m)First Floor (14 x2x 1.9 x 2.2m)b) Second FloorSecond Floor (14 x2x 1.9 x 2.2m)c) Third FloorThird Floor (14 x2x 1.9 x 2.2m) , Plastic Chair :- Providing and Supplying for Plastic Chair of size Seat Width 455mm x Seat Depth 380mm x Chair Height 870mm. SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE. With arms.
Contract Date: Ref. Documents Contract Value : ₹ 71.23 Lakh
Government Departments No of Bidders 4
Maharashtra View Result →
19.
Housing Urban and Rular Development #11201691 AOC
Bids Are invited for 12 Seater Reading Table for Library @ 3600 L x 1200 D x750 HT :- Providing and Fixing 12 Seater Reading Table for Liberary @ 3600 L x 1200 D x750 HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. , Study Table @ 900 L X 600 W X 750 H in MM Providing and fixing Study Table of Size 900 L X 600 W X 750 H Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and Modesty to the leg. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Storage Drawer shall be of min. 1 mm CRCA sheet with two Drawer , Smooth sliding Telscopic Channel with Central Lock & Handle . All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Suitable Folding Space Saving MS Chair to be provided ... Complet , Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Book Case with Glass Shutter @ 825Lx300Dx1650HT:- Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Providing & Arrangemnt of Mid Back, (Visitors Chair) Normal Syncro Mechanism,Fixed Armrest, Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery , Free Standing Table@ 1500 L x 600 D x750 HT :-Providing and fixing Table of Size 1500 L x 600 D x 750 mm. HThk. mm. PVC Top: edge made bands from glued 25 mm by hot melt Prelaminated glue applied Partide by board. auto All edge edges banding are covered machine. by 2 Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color, CPU TROLLEY:-Metal Powder Coated -Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle , Single Bed @ 2025LX 1000DX 650H :- Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: -The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. , Pinup board of size 1200 L x 400 H x 100 D in MM :- Providing and fixing Pinup board of size 1200 L x 400 H x 100 D - All Made out of 18 mm Commercial plywood duly pest with hot press machine with 1.5 mm laminate with all sides covered with edge band having front Clear Glass sliding lockable door and Soft board with required fabric for Pinup with Suitable Wall Fixing Bracket arrangement - Complete , Bunk Bed @ 2015 L X 920 W X 1650 H in MM :- Providing and fixing Bunk Bed of Size 2015 L X 920 W X 1650 H Understructure: - The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Matress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Quitable min. , Dinning Table 8 Seater @ 2300 LX 800 W X 750 H in MMProviding and fixing Dinning Table 8 Seater of Size2300 L X 800 W X 750 H with Folding Space Saving Stainless Steel Stool Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Diining Table Top shall be of min. 2 mm Stainless Steel Sheet with all edges & Covers to be properly failded & rounded for the sefety of students. Eight numbers of Foldable Stool Of Min. Dia 300 mm Stainess Steel to be provided with the help of Stanless Steel Hinges & MS 46 mm Leg work with Suitable Bottem rest for stool Stability. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT... Complet , Mattress Suitable for Bunk bed Providing and Sqplying Mattress with size 0.85 x 1.7 x 0.10,Material useing 25mm rubber rise 100 density 75 mm FR grade foam & cotton coated fabric ect. , Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).a) First FloorGF SickRoom (2 x2x 1.9 x 2.2m)First Floor (14 x2x 1.9 x 2.2m)b) Second FloorSecond Floor (14 x2x 1.9 x 2.2m)c) Third FloorThird Floor (14 x2x 1.9 x 2.2m) , Plastic Chair :- Providing and Supplying for Plastic Chair of size Seat Width 455mm x Seat Depth 380mm x Chair Height 870mm. SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE. With arms.
Contract Date: Ref. Documents Contract Value : ₹ 64.24 Lakh
Government Departments No of Bidders 4
Maharashtra View Result →
20.
Housing Urban and Rular Development #11201690 AOC
Bids Are invited for 12 Seater Reading Table for Library @ 3600 L x 1200 D x750 HT :- Providing and Fixing 12 Seater Reading Table for Liberary @ 3600 L x 1200 D x750 HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. , Study Table @ 900 L X 600 W X 750 H in MM Providing and fixing Study Table of Size 900 L X 600 W X 750 H Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and Modesty to the leg. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Storage Drawer shall be of min. 1 mm CRCA sheet with two Drawer , Smooth sliding Telscopic Channel with Central Lock & Handle . All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Suitable Folding Space Saving MS Chair to be provided ... Complet , Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Book Case with Glass Shutter @ 825Lx300Dx1650HT:- Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Providing & Arrangemnt of Mid Back, (Visitors Chair) Normal Syncro Mechanism,Fixed Armrest, Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery , Free Standing Table@ 1500 L x 600 D x750 HT :-Providing and fixing Table of Size 1500 L x 600 D x 750 mm. HThk. mm. PVC Top: edge made bands from glued 25 mm by hot melt Prelaminated glue applied Partide by board. auto All edge edges banding are covered machine. by 2 Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color, CPU TROLLEY:-Metal Powder Coated -Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle , Single Bed @ 2025LX 1000DX 650H :- Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: -The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. , Pinup board of size 1200 L x 400 H x 100 D in MM :- Providing and fixing Pinup board of size 1200 L x 400 H x 100 D - All Made out of 18 mm Commercial plywood duly pest with hot press machine with 1.5 mm laminate with all sides covered with edge band having front Clear Glass sliding lockable door and Soft board with required fabric for Pinup with Suitable Wall Fixing Bracket arrangement - Complete , Bunk Bed @ 2015 L X 920 W X 1650 H in MM :- Providing and fixing Bunk Bed of Size 2015 L X 920 W X 1650 H Understructure: - The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Matress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Quitable min. , Dinning Table 8 Seater @ 2300 LX 800 W X 750 H in MMProviding and fixing Dinning Table 8 Seater of Size2300 L X 800 W X 750 H with Folding Space Saving Stainless Steel Stool Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Diining Table Top shall be of min. 2 mm Stainless Steel Sheet with all edges & Covers to be properly failded & rounded for the sefety of students. Eight numbers of Foldable Stool Of Min. Dia 300 mm Stainess Steel to be provided with the help of Stanless Steel Hinges & MS 46 mm Leg work with Suitable Bottem rest for stool Stability. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT... Complet , Mattress Suitable for Bunk bed Providing and Sqplying Mattress with size 0.85 x 1.7 x 0.10,Material useing 25mm rubber rise 100 density 75 mm FR grade foam & cotton coated fabric ect. , Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).a) First FloorGF SickRoom (2 x2x 1.9 x 2.2m)First Floor (14 x2x 1.9 x 2.2m)b) Second FloorSecond Floor (14 x2x 1.9 x 2.2m)c) Third FloorThird Floor (14 x2x 1.9 x 2.2m) , Plastic Chair :- Providing and Supplying for Plastic Chair of size Seat Width 455mm x Seat Depth 380mm x Chair Height 870mm. SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE. With arms.
Contract Date: Ref. Documents Contract Value : ₹ 71.33 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
21.
Housing Urban and Rular Development #11201687 AOC
Bids Are invited for 12 Seater Reading Table for Library @ 3600 L x 1200 D x750 HT :- Providing and Fixing 12 Seater Reading Table for Liberary @ 3600 L x 1200 D x750 HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. , Study Table @ 900 L X 600 W X 750 H in MM Providing and fixing Study Table of Size 900 L X 600 W X 750 H Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and Modesty to the leg. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Storage Drawer shall be of min. 1 mm CRCA sheet with two Drawer , Smooth sliding Telscopic Channel with Central Lock & Handle . All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Suitable Folding Space Saving MS Chair to be provided ... Complet , Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Book Case with Glass Shutter @ 825Lx300Dx1650HT:- Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. , Providing & Arrangemnt of Mid Back, (Visitors Chair) Normal Syncro Mechanism,Fixed Armrest, Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery , Free Standing Table@ 1500 L x 600 D x750 HT :-Providing and fixing Table of Size 1500 L x 600 D x 750 mm. HThk. mm. PVC Top: edge made bands from glued 25 mm by hot melt Prelaminated glue applied Partide by board. auto All edge edges banding are covered machine. by 2 Legs: C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY):-Metal Powder Coated-Black Color, CPU TROLLEY:-Metal Powder Coated -Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle , Single Bed @ 2025LX 1000DX 650H :- Providing and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: -The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm. Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. , Pinup board of size 1200 L x 400 H x 100 D in MM :- Providing and fixing Pinup board of size 1200 L x 400 H x 100 D - All Made out of 18 mm Commercial plywood duly pest with hot press machine with 1.5 mm laminate with all sides covered with edge band having front Clear Glass sliding lockable door and Soft board with required fabric for Pinup with Suitable Wall Fixing Bracket arrangement - Complete , Bunk Bed @ 2015 L X 920 W X 1650 H in MM :- Providing and fixing Bunk Bed of Size 2015 L X 920 W X 1650 H Understructure: - The Verticallegs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 3 mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Four nos. of Horizontal stiffeners For Matress support are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Side Railing & Staircase is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.5 mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Quitable min. , Dinning Table 8 Seater @ 2300 LX 800 W X 750 H in MMProviding and fixing Dinning Table 8 Seater of Size2300 L X 800 W X 750 H with Folding Space Saving Stainless Steel Stool Understructure: - The Vertical legs & all Framing are made of Square tube of size 46 x 46 mm made out of MS with a thickness of 1.5 mm. The legs should have provided with Plastic Bush. Leg & Framing has to fixed in such a way that it to transfer the load to the ground and add to the strength and stability of the complete structure. Diining Table Top shall be of min. 2 mm Stainless Steel Sheet with all edges & Covers to be properly failded & rounded for the sefety of students. Eight numbers of Foldable Stool Of Min. Dia 300 mm Stainess Steel to be provided with the help of Stanless Steel Hinges & MS 46 mm Leg work with Suitable Bottem rest for stool Stability. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT... Complet , Mattress Suitable for Bunk bed Providing and Sqplying Mattress with size 0.85 x 1.7 x 0.10,Material useing 25mm rubber rise 100 density 75 mm FR grade foam & cotton coated fabric ect. , Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).a) First FloorGF SickRoom (2 x2x 1.9 x 2.2m)First Floor (14 x2x 1.9 x 2.2m)b) Second FloorSecond Floor (14 x2x 1.9 x 2.2m)c) Third FloorThird Floor (14 x2x 1.9 x 2.2m) , Plastic Chair :- Providing and Supplying for Plastic Chair of size Seat Width 455mm x Seat Depth 380mm x Chair Height 870mm. SEPERATE PLASTIC MOULDED SEAT AND BACK FITTED ON SUPPORT STRUCTURE. With arms.
Contract Date: Ref. Documents Contract Value : ₹ 53.20 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
22.
Defence #11191784 Price Bid
Tender for Taking Down Cement / Lime Plaster Of Any Description On Brick Work Or Stone Walls Etc Including Racking Out Joints Hacking For Key Scrubbing Down With Water Etc.Complete All As Specified And As Directed , M&L For Rendering 10 Mm Thick On Brick Or Concrete Surface Of Walls In Cement Mortar 1:6 Finished Even & Smooth Without Extra Cement On Internal Wall Surface Complete. , M&L For Rendering 15 Mm Thick On Brick Or Concrete Surface Of Walls In Cement Mortar 1:4 Finished Even & Smooth Without Extra Cement Including Mixing Only Water Proofing Compound As Per Manufacturer Instruction On External Wall Complete. Note:- Wpc Will Be Measured & Paid Separately , Supply Only Integral Water Proofing Compound , M&L For Preparation Of Newly Plastered Surfaces Of Wall And Applying Two Coat Of Oil Bound Distemper Over A Coat Of Primer Complete All As Specified And Directed , M&L For Preparation Of Newly Plastered Surfaces Of Wall And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. , M&L For Preparation Of Newly Plastered Surfaces Of Wall And Applying Two Coats Of Weather Proof Exterior Emulsion Over A Coat Of Primer Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Surfaces By Washing, Rubbing Down And Stopping Of Painted , Plastered Or Un-Plastered Surfaces Of Walls And Applying One Coat Of Oil Bound Distemper White Or Tinted Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Surfaces By Washing, Rubbing Down And Stopping Of Painted , Plastered Or Un-Plastered Surfaces Of Walls And Applying One Coat Of Cement Base Paint Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Surfaces By Washing, Rubbing Down And Stopping Of Painted , Plastered Or Un-Plastered Surfaces Of Walls And Applying One Coat Of Weather Proof Exterior Emulsion Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Surfaces Of Plastered Or Un-Plastered Surfaces Of Ceiling And Applying One Coat Of White Wash Complete All As Specified And Directed. , M&L For Preparation Of Old Surfaces Of Steel Exc 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete As In Roof/Wall Cladding All As Specified And As Directed By Engineer-In-Charge. , M&L For Preparation Of Old Surfaces Of Steel Exc 10Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete As In Door/ Gates,Windows,Railings,Structural Horizontal & Vertical Members & Similar Work All As Specified And As Directed By Engineer-In-Charge. , M&L For Preparation Of Old Wooden Surfaces And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified & As Directed. , Material & Labour For French Polishing Two Or More Coats On Wooden Surfaces Of Any Description, Width Or Girth Including Cleaning And Preparing The Surface Including A Coat Of Wood Filler On Old Work Till To Obtain The Mirror Finish Look Of The Surface Complete All As Specified And Directed. , Demolition Of Brick Work Masonry/Precast Block/Stone Masonry Built In Cement Mortar Or Cement Lime Mortar Including All Quoins, Arches, Pillars Etc But Excl Ashlars Facing,Dressed Stone Work And Pre-Cast Concrete Articles Complete All As Specified & Directed By Engr-In-Charge , M&L Brick Work With Sub Class B Bricks Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar (1:6) Complete All As Specified & Directed By Engr-In-Charge , M&L For Rendering 15 Mm Thick In Cement Mortar 1:4 On Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified. , Material & Labour For Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces Complete All As Specified. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises.Complete All As Directed. , M&L For Non Skid Coloured Ceremic Tiles 7 To 8 Mm Thick (Square / Rectanguler) Area Of Each Tile Exceeding 0.11 Sqm But Not Exeeding 0.18 Sqm As In Floors Etc Laid Over And Including 15 Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:6, Set And Jointed In Neat Cement Slurry And Pointed With Coloured Cement To Match The Tiles Complete All As Specified & Directed By Engr-In-Charge. , M&L For Glazed Ceramic Coloured Tiles 300X450mmx7mm Thick On Wall/Vertical Surfaces Such As Skirting, Dados And Riser To Steps Etc Including Laid Over 10Mm Thick 1:3 Cement Mortar For Laying Wall/Vertical Finish Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match All Complete All As Specified & Directed By Engr-In-Charge. , M&L For Vitrified Ceramic Tiles 9 To10 Mm Thick (Square / Rectangular) Light Shade Polished Area Of Each Tiles Not Exceeding 0.36 Sqm As In Floors Etc Laid Over And Including 15 Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:6, Set And Jointed In Neat Cement Slurry And Pointed With Coloured Cement To Match The Colour Tiles Complete All As Specified & Directed By Engr-In-Charge. , M&L For Chequered Cement Concrete Tiles 25Mm Thick With Grey Cement & Pigment In Reqd Proportion, Set,Area Of Each Tile Exceeding 0.05 Sqm But Not Exceeding 0.09 Sqm, Jointed And Pointed In Near Cement Slurry In Floors,Laid On Screed Bed Or Bedding Layer Of Mortar 15Mm Thick 1:6 Cement Mortar Complete All As Specified & Directed , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exceeding 15 Cm Thickness.(Below Or Above Ground Level) Complete All As Specified And Directed. , M&L For 75 Mm Thick Plain Cement Concrete, 1:3:6, Type C-2, Using 40Mm Graded Stone Aggregate As In Path/Plinth Protection, Laid In Alternate Bays Including Finishing The Surfaces Even And Smooth Without Using Extra Cement All As Specified & As Directed. , M&L For Plain Cement Concrete Type B1 1:2:4 Using 20 Mm Graded Aggregate In Cills, Steps, Parapets , Copings, Kneelers, Apex Stones, Bed Plates, Kerbs, Flooring, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating, As Directed Complete All As Specified & Directed. , M&L For 75Mm Thick Plain Cement Concrete (1:3:6) Type C2 (Using 40 Mm Graded Stone Aggregate ) As In Sub Base To Floors And Paving Etc Complete All As Specified And Directed. , M&L For 100 Mm Thick Plan Cement Concrete 1:2:4, Type B1 (Using 20 Mm Graded Stone Aggregate) As In Hardstanding,Path, Flooring Surface Finished Even & Smooth Using Extra Cement Complete All As Specified & Directed By Engr-In-Charge. , Dismantling Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Laid, Bedded, Pointed In Mortar Etc , M&L Granite 20Mm Thick (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window Cills, Cooking Platform And Like In And Including Cement Mortar Backing Cm (1:4),15 Mm Thick, Including Molding, Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Complete All As Specified And Directed. , Dismantling Mild Steel Or Wrought Iron Work In Roof Trusses,Gratings Etc And Similar Work Complete All As Directed , M&L For Mild Steel Work In Roof Trusses,Purlins,Rafters,Wind Ties,Crane Gantries,Rails And Fastenings And Heavy Bracket Framing (Beam,Tee,Angle,Channel Or Flat Sections) Including Distance Pieces,Cleats Etc Complete All As Specified And Directed. , Dismantaling Of Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness, Including Nainital Or Similar Pattern Roof Coverings Complete All As Specified & Directed. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strenth Of 550 Mpa As In Roof Covering / Clading To Waall , Fixed Self Tapping Screws Complete All As Specified And Directed. , S&F Pre-Painted Galvatume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strenth Of 550 Mpa As In Roof Covering / Clading To Waall , Fixed Self Tapping Screws Complete All As Specified And Directed. , S&F Galvanised, Corrugated 0.63Mm Thick Mild Steel Sheeting With Two Corrugations Side Lap, Fixed With L-Type Or J-Type Or Cranked Hook Bolts, With Bitumen Washer / Screws Complete All As Specified And Directed. , All Same As Per Item No. 37 Above But Except Sheeting (Any Thickness) Complete All As Specified And Directed . ( Note :- Old Sheet Shall Be Obtaind From Item No - 34 Above) , S&F Plain, Galvanised, 0.63Mm Mild Steel Sheeting, In Ridges, Hips, Valley Gutters, Drip And Straight Flashings (Length And Girth As Fixed) With Grade Of Zinc Coating 275 Fixed With L-Type Or J-Type Or Cranked Hook Bolts, With Bitumen Washer / Screws In Normal/Nainital Pattern Complete All As Specified And Directed. , All Same As Per Item No. 39 Above But Except Sheeting (Any Thickness) Complete All As Specified And Directed . ( Note :- Old Sheet Shall Be Obtaind From Item No - 34 Above) , Dismantling Of Wall And Ceiling Boards (Fiber, Pulp, Insulation Etc,) Or Insulation Boards/Slabs/Blankets, Any Thickness Including Cover Fillet Complete All As Specified And Directed. , S & F For Powder Coated Aluminium Anodised Snap Grid System Of Grid Size 600 X 600 Mm Fixed To Walls With Rawl Plugs And Screws And Hang To Roof Members With 2 Mm Dia Gi Wire Comprising Of The Main Tee 28X24x3mm Thick, Cross Tee 28X24x3mm Thick And Wall Angle 24X24x3mm Thick Sections Complete All As Specified And Directed:- , S & F 4 Mm Thick Everest Designer Ceiling (E-Board Classic) Board / Tiles For Insulation And Accoustic Purpose, 595 X 595 Mm Size Fixed With Staples On Gi/Aluminium Snap Grid As In Ceiling With And Including Dusting Of Surface And Applying Two Coats Of Oil Bond Distemper Over A Coat Of Primer Complete All As Specified And Directed , S & F In Repairs 6Mm Thick Decorative Pvc Sheet Hollow (Design Approved By Ge) For Insulation And Acoustic Purpose On Wall Surface, Screw To Timber Frame Work For Levelling Of Wall As Reqd, Including With Panelling To Vertical Surfaces, Fixed With Rawl Plug And Screws Complete All As Specified And Directed , Dismantling Of Boarding , Any Description Fixed In Any Position Like Wall ,Wooden Flooring And Ceiling Boards (Fiber, Pulp, Insulation Etc,) Or Insulation Boards/Slabs/Blankets, Any Thickness Including Cover Fillet Complete All As Specified And Directed. , S&F For 8Mm Thick, Wooden Pieces, Machine Presured One Side Laminated And Other Side Balancing Green, As In Parquet Flooring With And Including Necessary Padding As Soft Wool Graded Type As Required At Site, Fixed With Adhesive As Per Manufacturers Instructions Including Taking Down Old Wooden Flooring With Or Without Plywood Complete All As Specified And Directed. , -Ditto- All As Per Item No. 47 Above But Except Material. , M&L For 12 Mm Thick Plywood, Grade Bwr, Type Bb, Number Of Ply 7 Nos Fixed With Screws To Timber Frame Work Complete All As Specified And Directed , S & F Second Class Hardwood 25 Mm Boarding Plain One Side With Butt Joint Fixed With Nails In Any Situation Complete All As Specified And Directed. , M/L For 0.90 Mm Thick Decorative Laminate Type 1 Of Surface Finish,Colour And Pattern As Approved, Fixed With Approved Adhesive As Per ManufacturerS Instructions Complete All As Specified And Directed , Dismatling Timber Scantling 40 Sqcm And Above In Any Position ,Unframed Work Complete All As Specified And Directed , M&L 2Nd Class Hard Wood As In Scantling Clean Sawn As In Floor/Roof/Truss/Purlin & Similar Work Of Any Description In Framed Work Complete All As Specified And Directed. , Taking Down Wooden Chowkhat Or Frame Area Not Exc 1.5 Sqm Each With Shutter (Without Taking Off Shutter From Frame) As Directed. , Taking Down Wooden Chowkhat Or Frame Area Exc 1.5 Sqm And Not Exc 4 Sqm Each With Shutter (Without Taking Off Shutter From Frame) As Directed. , Taking Down Of Shutters Of Any Description Not Exc 1.0 Sqm Each And Resecuring Or Easing And Adjusting With Refixing In Same Opening With Using Of Necessary Arrengements Complete All As Specified And Directed. , Taking Down Of Shutters Of Any Description Exc 1.0 Sqm But Not Exc 2.0 Sqm Each And Resecuring Or Easing And Adjusting With Refixing In Same Opening With Using Of Necessary Arrengements Complete All As Specified And Directed. , Taking Down Shutters ( Per Leaf ) Of Any Description Not Exc 1 Sqm Each Complete All As Specified And Directed. , Taking Down Shutters ( Per Leaf ) Of Any Description Exc 1 Sqm But Not Exc 2 Sqm Each Complete All As Specified And Directed. , S & F 2Nd Class Hard Wood Plain Solid Straight Chowkhats And Frames, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, And Making Good With Existing Surface As Complete As Specified And Directed. , S & F 35 Mm Thick Second Class Hard Wood Glazed And Skeleton Door Shutters, Open Rebated And Prepared To Receive Gauze Without Sash Bars, Edges Of Framing Plain Fitted With Cut And Mitred Beads For Securing Wire Mesh Or Glass, Size Of Members Of Shutter As Specified In Ssr Pt-I Sec-8 Clause 8.24(A) Fitted To Chowkats, Complete As Specified And Directed. , S&F 35 Mm Thick Second Class Hardwood Plain, Framed, Panelled Shutters (Any Number Of Panels), With Panels Of Timber Flat On Both Sides (Feather Edged), Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers: Supplied And Fitted To Chowkats Complete All As Specified & Directed. , S&F 30 Mm Thick Flush Shutters Solid Core Construction With Block Board Core And Plywood Face Panels Commercial Type On Both Sides. , S&F 30 Mm Thick Second Class Hard Wood Glazed And Skelton Window And Ventilators Shutters Open Rebated And Prepaired To Received Glass Gauge Etc Divided Into Square With Sash Bar Edges Of Framing Plain Chamfered Or Rounded Fitted With Cut And Mittered Beads For Sequring Glass Gauge Etc , Size Of Members Of Shutters As Specified In Mes Ssr -I Section 8 Clause 8.24 (B) Complete All As Spcified And Directed , M&L Mild Steel Work In Framed Work Such As Grills, Gratings, Guard Bars Etc., With Ends Of Bars Shouldered And/ Or Riveted, Or Forged Into Spikes, And Similar Work Confirming To Fe 290.Gde-E-165, Complete All As Specified And Directed. , Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden Frames Or Stone, Concrete Or Brick Surrounds, Glazed With Putty Or Fixed With Beads As Directed. , S&F Sheet Glass Ordinary Quality & Glazing With Wooden Bead/Oil Putty In Square N.Exc 0.5 Sqm In Each Panel 3 Mm Thick Complete All As Per Specified And Directed. , S & F 3 Mm Thick Figured Glass, Pin Headed Type And Glazing With Oil Putty In Squares Not Exceeding 0.5 Sqm In Each Pane Complete As Specified And Directed. , S&F Sheet Glass Ordinary Quality & Glazing With Wooden Bead/Oil Putty In Square N.Exc 0.5 Sqm In Each Panel 5.5 Mm Thick Complete All As Per Specified And Directed. , S & F Galvanized Mild Steel Wire Cloth, 0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 Mm And Fixed With Tinned Stacks, Or Galvanized Wire Staples, Complete All As Specified And Directed. , Supply And Fixing 75 Mm Butt Hinges Medium Weight Cold Rolled Mild Steel Isi Marked Fixed With Wooden Screws Complete As Specified And Directed. , Supply And Fixing 100 Mm Butt Hinges Medium Weight Cold Rolled Mild Steel Isi Marked Fixed With Wooden Screws Complete As Specified And Directed. , Supply And Fixing 100 Mm Mild Steel Pressed Handles, Oval Type, Stove Enamelled Black And Fixed With Wooden Screws, Complete As Specified And Directed. , Supply And Fixing 150 Mm Mild Steel Pressed Handles, Oval Type, Stove Enamelled Black And Fixed With Wooden Screws, Complete As Specified And Directed. , M&L For Mild Steel Barrel Tower Bolts Stove Enameled Black, With Bright Bolt Length Of Bolt 100 Mm (Isi Marked) Fixed Complete Fixed With Screws,Complete As Specified And Directed. , M&L For Mild Steel Barrel Tower Bolts Stove Enameled Black, With Bright Bolt Length Of Bolt 150 Mm (Isi Marked) Fixed Complete Fixed With Screws,Complete As Specified And Directed. , Supply And Fixing Mild Steel Sliding Door Bolt Clip Type (Isi Marked) Stove Enameled Black With Bright Bolt Not Less Than 12 Mm Dia With And Including A Minimum Of 6 Bolts, Length Of Bolt 250 Mm And Fixed With Mild Steel Wood Screws All As Specified And Directed , S&F In Repair Butt Hinges, Medium Weight, Cold Rolled Mild Steel, 75Mm Size Complete All As Specified And As Directed , S&F In Repair Butt Hinges, Medium Weight, Cold Rolled Mild Steel, 100Mm Size Complete All As Specified And As Directed , S&F In Repair 100 Mm Mild Steel Pressed Handles, Oval Type, Stove Enamelled Black And Fixed With Wooden Screws, Complete As Specified And Directed. , S&F In Repair 150 Mm Mild Steel Pressed Handles, Oval Type, Stove Enamelled Black And Fixed With Wooden Screws, Complete As Specified And Directed. , S&F In Repair Mild Steel Barrel Tower Bolts Stove Enameled Black, With Bright Bolt Length Of Bolt 100 Mm (Isi Marked) Fixed Complete Fixed With Screws,Complete As Specified And Directed. , S&F In Repair Mild Steel Barrel Tower Bolts Stove Enameled Black, With Bright Bolt Length Of Bolt 150 Mm (Isi Marked) Fixed Complete Fixed With Screws,Complete As Specified And Directed. , S&F In Repair Mild Steel Sliding Door Bolt Clip Type (Isi Marked) Stove Enameled Black With Bright Bolt Not Less Than 12 Mm Dia With And Including A Minimum Of 6 Bolts, Length Of Bolt 250 Mm And Fixed With Mild Steel Wood Screws All As Specified And Directed , S&F In Repair Mild Steel 300Mm Ordinary Rat Tail Rod Pattern Spring Including Roller And Roller Plate Complete Complete All As Specified & Directed. , S&F In Repair 150Mm ,Floor Door Stopper Of Aluminium Alloy Body And Tongue, Anodised, With Hard Drawn Steel Spring, Fixed In Floor Complete Complete All As Specified & Directed. , M&L Preparation Of New Or Previously Untreated Wood And Wood Based Surfaces Of Any Description, Not Otherwise Described, Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint (Ordinary Tint) Over A Coat Of Pink Primer Complete All As Specified And Directed. , M&L Preparation Of New Or Previously Untreated Steel Surfaces Of Any Description, Over 10 Cm Width Or Girth, Not Otherwise Described And Applying Two Coats Of Synthetic Enamel Paint (Ordinary Tint) Over A Coat Of Red Oxide Primer, Complete All As Specified And Directed. , S&F In Repair 25 Mm Dia Curtain Rod/Harrison Rails,Mild Steel, Chromium Plated Fancy Type Fixed With End Brackets, Stops ,Rollers & All Connected Accessories Complete All As Specified And Directed. , Disconnecting Existing Water Tank Setting Aside ( Or Lowering If Required ) For Repairs Cleaning Etc And Hoisting If Required Reconnecting And Re-Fixing In Position Including Cleaning And Removing All Scale And Dirt Etc From Tanks And From Mouths Of Circulating Pipes Etc Cap Exc 250 Ltr & N. Exc 500 Ltrs, Complete All As Specified And As Directed By Engr-In-Charge. , Disconnecting Existing Water Tank Setting Aside ( Or Lowering If Required ) For Repairs Cleaning Etc And Hoisting If Required Reconnecting And Re-Fixing In Position Including Cleaning And Removing All Scale And Dirt Etc From Tanks And From Mouths Of Circulating Pipes Etc Cap Exc 500 Ltr & N. Exc 1000 Ltrs, Complete All As Specified And As Directed By Engr-In-Charge. , Dismantling Pvc Water Tanks And Removing From Site Capacity For Exc 250 Ltrs But N. Exc 500 Ltrs Complete All As Specified And As Directed. , Dismantling Pvc Water Tanks And Removing From Site Capacity For Exc 500 Ltrs But N. Exc 1000 Ltrs Complete All As Specified And As Directed. , M&L For Rotational Moulded Polyethylene Water Storage Tank 250 Ltrs Capacity Double Layered Cylindrical Vertical With Closed Top Hoisted And Fixed In Position Including Fittings All As Specified And As Directed. , M&L For Rotational Moulded Polyethylene Water Storage Tank 500 Ltrs Capacity Double Layered Cylindrical Vertical With Closed Top Hoisted And Fixed In Position Including Fittings All As Specified And As Directed. , M&L For Rotational Moulded Polyethylene Water Storage Tank 1000 Ltrs Capacity Double Layered Cylindrical Vertical With Closed Top Hoisted And Fixed In Position Including Fittings All As Specified And As Directed. , S&F 20Mm Bore Ball Valve, High Pressure With Epoxy Coated Aluminium Rod And High Density Plastic Vavle Screwed For Iron Pipe And Fixed Of 20Mm Dia (Min Wt 210 Grms) Complete All As Specified And Directed. , S&F In Repair 15Mm Bore Ball Valve/Float Valve, High Pressure With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed Of 15Mm Dia (Min Wt 142 Grms) Complete All As Specified And Directed. , S&F In Repair 20Mm Bore Ball Valve/Float Valve, High Pressure With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed Of 20Mm Dia (Min Wt 210 Grms) Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Tubing And Connections, Complete All As Specified And As Directed , Taking Up Or Down 20 Mm Bore Steel Tubing And Connections, Complete All As Specified And As Directed By Engr-In-Charge. , Supply And Fix 15 Mm Bore Galvanized Steel Water Tubing, Medium Grade Including Necessary Fittings Such As Gi Bends, Tee, Union Etc Fixed On Wall / Floor Complete And Connecting To Water Supply Pipe Line All As Specified And As Directed By Engineer-In-Charge. , Supply And Fix 20 Mm Bore Galvanized Steel Water Tubing, Medium Grade Including Necessary Fittings Such As Gi Bends, Tee, Union Etc Fixed On Wall / Floor Complete And Connecting To Water Supply Pipe Line All As Specified And As Directed By Engineer-In-Charge. , Supply And Fix In Repair White Vitreous China Squatting Pan ‘Orissa Pattern Of Size 580 Mm X 450 Mm White With Integral Foot Rests With ‘P Or ‘S Trap, Front Or Back Inlet Including All Connection And Provision Of Lime Concrete Base Complete All As Specified And As Directed.. , S&F In Repair Vitreous China Wash Down Water Closet Pan (Padestal Pattern) With Seat Cover (Excluding Fixing Bolts, Flushing Cistern And Flush Pipe) Etc Complete All As Specified And As Directed. , S&F In Repair Flushing Cistern 10Ltr Capacity Pvc Valveless, Syphonic Action Type, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets Complete All As Specified & Directed. , S&F In Repair For Wash Basins, Vitreous China (Flat Back Or Angle Back Type) Size 580X450mm, Including Cutting For And Pinning In Ends Of Brackets Or Erecting Stand But Exclusive Of Fixing Of Supply And Waste Pipe , Complete All As Specified And As Directed. , S&F In Repair Single Piece Ewc Combined With Flushing Cistern, Waste Pipe, Trap, Seat Cover, Jet Spray Including All Necessary Accessories, Fittings & Bolts Complete All As Specified & Directed. Make- Jaguar Lyric Single Piece Ewc P-180 Complete All As Specified And Directed. , S&F In Repair Bathroom Tabletop Ceramic Washbasin (Size Not Less Than 500X300x125mm) Over Marble Counter And Bwr Plywood Cabinet (White) As Approved By Ge With Waste Pipe, Coupling And Fittings Complete All As Specified & Directed. Make- As Approved By Ge , S&F In Repair 15 Mm Dia Bib Tap Cast Copper Alloy, Fancy Type Chromium Plated ,With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule All As Directed. , S&F In Repair Fancy Type 15 Mm Dia Pillar Taps ,Cast Copper Alloy ,With Capstan Heads Chromium Plated Screwed Down High Pressure, With Or Without Letterd Hot Or Cold With Long Screwed Shanks And Fly Nuts ,Screwed For Iron Pipe And Fixed. , S&F In Repair Brass Cp Stop Valve/ Angle Valve 15 Mm Fancy Type With Long Shank And Cup Fixed. , S&F In Repair 600Mmx450mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood & Fixed To Wooden Plugs With Cp Brass Screws & Cup Washers Complete All As Specified & Directed. , S&F In Repair Toilet Paper Holder( White) With Flat Recessed Type Stainless Steel Complete All As Specified And Directed. , S&F In Repair Plastic Water Closet Seat, Black, Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified & Directed. , S&F In Repair Soap Dish Tray Embedded In Wall , Vitreous China White, Approximate Size 160X160x90 Mm Complete All As Specified & Directed. , S&F In Repair Pvc Connection 15Mm Size With Brass Nuts Of Length 450Mm Complete All As Specified & Directed. , S&F In Repair Tubular Brass Chromium Plated Towel Rail, 20Mm Dia, D Type, 60Cm Long Between Flanges Complete All As Specified & Directed. , S&F In Repair 15Mm Bore Fancy Type Chromium Plated Central Hole Wash Basin Mixer With 450Mm Long Braided Hoses,Screwed Down High Pressure With Or Without Lettered Hot And Cold Srcrewed For Iron Pipe Complete All As Specified & Directed. Make-Jaguar Or Equivalent Approved By Ge , S&F In Repair 15Mm Bore Fancy Type Chromium Plated Wall Mixer With Provision For Overhead Shower With 115Mm Long Bend Pipe On Upper Side, Connecting Legs And Wall Flanged,Screwed Down High Pressure With Or Without Lettered Hot And Cold Srcrewed For Iron Pipe Complete All As Specified & Directed. Make- Jaguar Or Equivalent Or Approved By Ge , S&F In Repair Ptmt Nipple 15 Mm Bore Dia For Hdpe Water Tank(Min Weight-38 Gms) Complete All As Specified & Directed. , S&F In Repair Ptmt Nipple 20 Mm Bore Dia For Hdpe Water Tank(Min Weight-45 Gms) Complete All As Specified & Directed. , S&F In Repair Union Brass Of 15Mm Bore Dia To Connect Iron To Polyethylene Complete All As Specified & Directed. , S&F In Repair Union Brass Of 20Mm Bore Dia To Connect Iron To Polyethylene Complete All As Specified & Directed. , S&F In Repair Elbow/Tee Of 15 Mm Bore Dia Brass All Ends Screwed And Fixed Complete All As Specified & Directed. , S&F In Repair Elbow/Tee Of 20 Mm Bore Dia Brass All Ends Screwed And Fixed Complete All As Specified & Directed. , S&F In Repair 32 To 40 Mm Dia Pvc Waste Pipe For Wash Basin And Kitchen Sink Complete All As Specified & Directed. , Taking Up 80Mm Bore Pipes Cast Iron Water Mains (Including All Fittings), With Spigot And Socket Ends And Lead Joints Includingburning Out Joints And Recovering Lead Complete All As Specified And As Directed , S&F In Repair Pvc (Swr) Pipes 75 Mm Dia Single Socketed, In Any Length With Rubber Ring Joints, Fixed On Walls Or Floors Complete All As Specified And As Directed , S&F Pvc (Swr) Plain Bend 75 Mm Dia, Of Any Redius With Rubber Ring Joints, Complete All As Specified And As Directed , S&F Pvc (Swr) Plain Bend 110 Mm Dia, Of Any Redius With Rubber Ring Joints, Complete All As Specified And As Directed , Taking Up 100 Mm Bore Pipes Cast Iron Water Mains (Including All Fittings), With Spigot And Socket Ends And Lead Joints Includingburning Out Joints And Recovering Lead Complete All As Specified And As Directed , S&F In Repair Pvc (Swr) Pipes 110 Mm Dia Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches Or In Floors Complete All As Specified And As Directed , S&F 32Mm Dia Waste Fittings, Brass, Chromium Plated For Glazed Ware Sinks, Basins, Etc With Long Screwed Shanks And Fly Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed. , S & F In Repairs 15 Mm Bore Fancy Type Telephonic Shower (Healthfaucet), Cast Copper Alloy, With Chromium Plated, Screwed Down High Pressure With Or Without Lettered Hot Or Cold With Lenght Not Less Than 1.0Mtr Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe/Stop Value And Fixed As Cat No 455, Make:- Prayag Or Equavalent As Approved By Ge. , M&L For 75Mm Dia Pvc Nahani Trap Or Floor Trap With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete (1:2:4) Type B1 Complete All As Specified And Directed. , S&F In Repair Sink With Drainage Board Made Of Stainless Steel 1Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X 160Mm Complete All As Specified And Directed. , S& F Power Coated Aluminum (Minimum Thikness Of Power Coated 50 Micron ) Work For Doors Windows, Ventilators And Partition (Fixed Portion ) With Extruded Built Up Standard Tubular Section/Approriate Z Section And Other Section Of Approved Make Confirming To Is 733 And Is 1285 , Fixing With Dash Fasteners Of Required Dia And Size, Inc.Necessary Filling Up The Gaps At Junction , I.E. At Top , Bottom And Sides With Required Epdm Rubber/Neoprene Gasket Etc Aluminium Sections Shall Be Smooth And Rust Free Straight , Mitered And Jointed Mechnicallly Where Ever Required Incl. Cleat Angle . Aluminium Snap Beding For Glazing/Paneling , C.P Brass / Stainless Steel Screws , All Complete As Per Architectural Drg And Direction Engr - In Charge , S &F Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/Neoprene Gasket Required (Fittings Shall Be Paid For Separately) With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling, C.P. Brass/ Stainless Steel Screws All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. , S&F In Reparis 15Mm Bore Bib Tap Standard Of Ptmt Any Colour High Pressure Screwed For Iron Pipe And Fixed With And Including Wall Flange (Minimum Weight 15Mm-90Gms)Complete All As Specified And As Directed (Make : Prayag Or Equivalent). , S&F Aluminium Die Cast Body Door Closer Hydraulically Regulated Designation No,2 Universal Type Suitable For Door Shutter Of 701 To 850Mm Width And Of Weight Between 36 To 60 Kg Isi Marked Complete. , S&F In Repair Vitreous China Urinal, Half Stall Type, White With Waste Pipe And Cp Brass Spreader Complete Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plug With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Flush Pipe, Grating And Union For Discharge Pipe Including Cp Urinal Spreader For Fixing With 15 Mm Dia Pipe Complete All As Specified. , Supply Only Water Tank Cover For Tanks Of Size 500 Ltr Or 1000 Ltrs Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttarakhand View Result →
23.
Housing Urban and Rular Development #11186554 Technical Bid
Supplying Various Material At Varsha Bunglow, Malbar Hill, Mumbai.-1 . Coir Mattresses6 thick - 1 MM foam & 5 HR foam8 thick - 2 MM foam& 6 HR foamRemovable zipper cover for easy maintenanceVOC& hazard free MM foam 2 . Box type Cotton Mattresses sizeSize 182.9 x 91.4 x 10.2 cmDimension (Length x Width) 2.5ft * 6ftThickness 5inch of 10 Kg. cotton 3 . Steel Cupboard Approx size 78’’H X 36’’ W X 19’’D having four adjustable shelves and two steel doors with three way bolting device, built in lock with two keys and full body double powder coated finishing . Cupboard shall be fabricated out of 20/22 Swg. 4 . Aluminium Baby Ladder 8ftMade from High Tensile AluminiumAlloy.Sides: Aluminium sides tube sections 50 mm x 20 mm.Steps : 3” flat steps ribbed section with tubular support fitted 9” apart.Platform: 1 no. ( 12” x 10” ) Auto – Fold Platform to keep tools on the ladder.Rubber: Solid non-skid heavy rubber shoes at the bottom of the ladder for extra grip. 5 . WHEEL DUST BIN 240 LTR.Capacity 240 Ltr. Made from superior material quality and workmanship, low dead weight, user friendly. These are the outstanding features of the wheel plastic container. Wheelss are made from solid rubber tyres. 6 . WHEEL DUSTBIN 120 LTR.Capacity120 Ltr. Made from superior material quality and workmanship, low dead weight, user friendly. These are the outstanding features of the wheel plastic container. Wheels are made from solid rubber tyres. 7 . Napkin (Turkish) free size 8 . New Sataranji (Dari) 8 X 12 9 . Pillows (15 x 24) 1.50 Kg. cotton with cloth and labour transportation charges (including stitching charges labour charges of Engineer in charge) 10 . Plastic Buckets (20 Liters) 11 . Plastic Buckets (5 Liters) 12 . Plastic Mug 13 . Rubber based Door matt medium (Size: 70cm X 100cm) 14 . Steel Bath stool 9 15 . Towel (Turkish) Bombay Dying / Superior quality White 70 cm x 140 cm 16 . Napkin 22 x 24 best quality Bombay Dying. 17 . Colour Double Bed sheets (88 x 98) (Bombay Deying) 2 Pillow cover included with all the Bed sheet & pillow covers embossed as MLA Hostel Mumbai 2019 18 . Cleaning surface, washing, drying existing kota stone ladi and providing, supplying& fixing H.D. PVC Garden Lawn green colour as per sample approved at Government Bunglow C-5.Lawn fixing by chemical 19 . Providing and positioning bunk bed made out of approved colour, powder coated, M.S. (IS 513:2008) pipe frame and angle supports. Two end frames shall be made out of 16 guage and 40 mm dia M.S pipes as vertical supports and 16 guage 25 mm dia M.S pipes along with 40 x 40 x 6 mm M.S angle lateral frame to recieve 12mm thk marine grade ply base for 100 mm thk ,100 density coir mattress etc. complete. Edges of the base ply shall be sealed with 6mm thk T.W lipping. Two nos of 25 mm dia 16 guage pipe supports shall be provided to support both the base ply and ladder and with necessary Nylon bushers for pipe ends touching to floor and with approved colour powder coating and complete as per the instructions of the Architect or Engineer in charge. Note: This item shall be made in knock down type of arrangement. 20 . Dressing Table @400LX 400DX 1800H Providing & Fixing Dressing Table of size 400LX 400DX 1800H.The Dressing table unit is made up of 18mm thickPrelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The unit has one drawer and one shelf. The dressing table has a mirror of 4mm thick pasted on 18mm thickprelm particle board attached to the base unit. The mirror size considered is 1155 x 360 x 4(t). The mirror has been pasted using high quality 3M sticker. 21 . Corner Table of size 18 x 18 teak wood and finish in Melamine matt polish.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Maharashtra View Result →
24.
Environment and Forests #11182621 Technical Bid
Tender for Supply Of Plywood For Joinery & Carpentry Unit, Siliguri Required For Joinery And Carpentry Works Under Darjeeling Forest Corporation Division, Wbfdc Ltd. , Supply Of Plywood - Boiling Water Proof (Is 710), Borer And Termite Proof (Treated With Acc), Made Using Phenol Formaldehyde (Is 848), Fire-Retardant (Is 5509), Maintain Reputed Brand. , Thickness: 4 Mm Section: 6 X 3 6 X 4 7 X 4 7 X 3 8 X 3 8 X 4 , Thickness: 6 Mm Section: 6 X 3 6 X 4 7 X 4 7 X 3 8 X 3 8 X 4 , Thickness: 12 Mm Section: 8 X 3 8 X 4 6 X 3 6 X 4 7 X 3 , Thickness: 19 Mm Section: 6 X 3 7 X 4 7 X 3 8 X 3 6 X 4 8 X 4 , Supply Of Teak Veneer - Boiling Water Proof (Is 710) Grade, Maintain Reputed Brand. 8X 4 , Thickness: 3.5 Mm - 4 Mm , Supply Of Decorative Laminate , Thickness: 1 Mm 8 X 4 , Thickness: 0.5 Mm 8 X 4
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
25.
Tourism #11175186 Price Bid
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation In Trenches For All Leads & Lifts In All Type Of Strata Comprising Of Any Type Of Materials Either In Full Or Part As The Case May Be Adopting Any Method/Methods As May Be Convenient As Permitted Excluding Blasting In All Conditions Such As Dry, Moist, Foul, Saturated, Submerged, Etc,. Including Dressing Of Sides, Planking & Strutting, Timbering ,Ramming Of Bottom ,Pumping And Bailing Out Water ,Barricading Danger Lighting Guarding, Getting Out Excavated Soil & Stacking As Directed By Engineer For All Leads & Lifts Etc. Complete , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Supplying And Filling In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. Moorum , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading, Transportation, Unloading, Levelling Etc At The Risk And Cost Of Agency / Contractor Including Selection Of Site For Disposal With All Lifts And Leads Etc. All Complete. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continious Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level. M-30 Grade Of Concrete , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Foundations, Footings, Bases For Columns , Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates. I.Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc.String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Providing And Laying In Position Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 40 M Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing : In Retaining Walls , Return Walls(Any Thk) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Providing And Fixing Exposed Laterite Stone Of 100 Mm Thk For Dado ,Laid On Cement Mortar Paste 1:4 (1 Cement : 4 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Stone Including Rubbing Including Applying Acrylic Varnish Etc Complete. As Per Designs And The Directions Of The Engineer-In-Charge. , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And And Laying Vitrified Floor Tiles In Different Sizes Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make In Colours And Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigment Etc., Complete. 600X 600 Mm Dark Shades , Providing And Laying Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Lakha Red , Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid . Plain White Makrana Slab 25Mm Thick , Marble Stone Flooring With 18 Mm Thick Marble Stone (Sample Of Marble Shall Be Approved By Engineer-In-Charge) Over 20Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement:4 Coarse ) Using : White Makrana Marble , Providing And Laying 300X350x160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 75 Mm Gap Between Two Stone For Grassing.Gaps To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.(Price Including Stone,Gardening Soil,Fertilizers And Grass Etc Complete). , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. Size 30 Cm Lx 40 Cm H X 15 Cm T , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Demolishing Reinforced Cement Concrete Work Including Stacking Of Steel Bars & Disposal Of Unserviceable Within 50 Steel Bars & Disposal Of Unserviceable Within 50 , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. 12 Mm Cement Plaster 1 :3 ( 1 Cement : 3 Sand) , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Providing & Fixing 19Mm Thk Plywood Work In Frames Of Doors Using 19Mm Marine Ply (Waterproof) With All Hardware,And Other Frames And Fixed In Position With 50 Mm Fastners Etc. Complete As Specified As Shown In The Drawings. , Providing And Fixing First Class Indian Teak Wood Moulded Beading To Door And Window Frames With Iron Screws, Plugs And Priming Coat On Unexposed Surfaces Etc. 50 X 12 Mm , Providing And Fixing Block Board Flush Door Shutters 35Mm Thick ( 1St Class Teak Ply On Both Faces), Laminated On Both Sides With 1Mm Thick Laminate Of Approved Brand And Colour Including Cost Of Adhesive, Nails, Screws During Fixing Etc. Complete. , Providing & Fixing Bright Finished Stainless Steel Mortise Latch & Lock With 60 Mm Cylinder And A Pair Of Levers, Handles With Necessary Screws Etc.Complete , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete. 250 X 16X 5Mm , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete Size 125 X 70 X 4.0Mm , Providing And Fixing 150 Mm. Bright Finished Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutter Thickness Complete. , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete , Providing And Applying Decorative Plastering For A Window Sorrounding, Using 1:4 Morter Mixture With Bricks Chips,Featuring A 300Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer. (The Job Involves Applying A Decorative Finish Over Underlying Structure, Incorporation Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Double Piller At The Corner (Ht 3.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Center (Ht 3.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Center For Hall(Ht 2.10 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 200Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Arch Of Span Of 3Mt., Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Flowers At The Ceiling With Dia. 1.20Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering Ofr Cornice At Ceiling In Hall Of Ht 0.40Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Construction And Installation 6Mt Height Replica Of Shree Suptakoteswar Stumb Using Sadhahalli Grey Granite Stone With Intricate Carvings, Moulding As Per Drawing. The Structure Should Have 6Mt Ht. With 2.5 X2.5X0.70 Mt Ht At Base And Stumb Of 1.50X1.50X5.25 Mt Height At Top As Per Details Drawings And Direction By The Engineer. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Paduka For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A 150Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Padma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Kumuda For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Adhopadma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Big Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2100Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Karnakuta ), Using 1:4 Morter Mixture With Bricks Chips, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1500Mm Height ,750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Cornice ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 750Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1200Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Adhopadma For Sajja), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 200Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Cornice Above Adhopadma ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Yalli ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Electrical Works , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 1/2 Core 70Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 1.5 Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.3 Core 2.5 Sq.Mm , Supply Of 4 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.4 Core 2.5 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required.(A) In Soily Strata , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 70 Sq. Mm. , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator)(K) 12 Way (8+36), Double Door, Horizontal Type Cat B , Supplying And Fixing 40 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(E) Tpn, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.Group C -- With Cat B Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required.B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required.(C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.A) 20 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.B) 25 Mm , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Requiredd) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Requireda) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required(A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Requiredb) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required(C) 6 Module (200Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Requiredsitc Of Wall Fan,600 Mm Sweep, With All Accessories. , Supply Installation Testing And Commissioning Of 8-10 W Spot Light Cob Ip65 Light With System Efficacy Of 100 Lm/W.L70 Life Of 50000 Hrs. P.F.0.95 With Thd10% ,Cct 5700 K,Cri 70,Surge Protection 4 Kv. Input Voltage Range Of 120V To 300V.Certification:- Lm79 & Lm80 Test Report Should Be From Govt Approved Inhouse Nabl Lab/ Government Of India Authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj As Required And Directed By Engineer Incharge , Supply Installation Testing And Commissioning Of W 80W Flood Light Ip65 Light With System Efficacy Of 100 Lm/W.L70 Life Of 50000 Hrs. P.F.0.95 With Thd10% ,Cct 5700 K,Cri 70,Surge Protection 4 Kv. Input Voltage Range Of 120V To 300V.Certification:- Lm79 & Lm80 Test Report Should Be From Govt Approved Inhouse Nabl Lab/ Government Of India Authorised Make Havells/Wipro/Phillips/ Legaaro/Bajaj As Required And Directed By Engineer Incharge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply Installation Testing and Commissioning of Decorative Chandelier Having Finest Crystals In Chrome Finish, Material -Mirror Stainless Steel, Dimensions (Mm) -Dia. =600X1500(H),Lamp Base- G9, Wattage- 7X42w Max, Complete With All Accessories. , Supply Installation Testing and Commissioning of Decorative Chandelier Having Finest Crystals In Chrome Finish, Material -Mirror Stainless Steel, Dimensions (Mm) -Dia. =1200X1500(H),Lamp Base- G9, Wattage- 12X42w Max, Complete With All Accessories. , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark,Of Approved Brands, Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. With Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineerincharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe. G)Watering Arrangement(Plumbing Will Be Paid Seperately). , Supply Installation Testing and Commissioning of 12W Multi Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 12W, Cct : Rgbw, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 400Mm. , Supply Installation Testing and Commissioning of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 80W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo Separate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 300Mm. , Supply Installation Testing and Commissioning of High Quality Multi Color Neon Flexible Light, Protection Rating : Ip65, Mounting Structure : Adjustable Wall Mount Ss Clips For Fixing The Lights. Power Consumption : 12W, Cct : Rgb/Rgbw, (As Per The Design Approval) Beam Angle : 120º, Control : Dmx512 Channel : 4 Ch, Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Time Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Epistar, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. , Supply Installation Testing and Commissioning of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard Is 10322 (Part 5/Sec 1): 2012 And Having Ce Certification Against Standard Low Voltage Directive & Protective Equipment - En 60598-1:2015, And Electromagnetic Compatibility Directive - En 61547: 2009, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 50W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length 300Mm. , Supply Installation Testing and Commissioning of Aluminium Profile For Neon Flex , Supply Installation Testing and Commissioning of Dc Power Driver For The Above Lights, Power : 200W, Input : Ac 110-240V Ac, 50Hz, Output : Dc 12/24V, Protection Rating, Ip67, Surge Protection : Ll 4Kv, Le 6Kv , Supply Installation Testing and Commissioning of High Quality Dmx Decoder, Power Input : Dc 24V , Supply Installation Testing and Commissioning of Pvc Insulated Multi Core Electrical Un Armoured Flexible 5C X 0.5Sq Mm Power Cable Having Less Electrical Losses. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of 5 Core Dmx Cable Comprises Twisted Pairs With Shield Support For Carrying Of Data. Dmx512 Cable Is Used For Connecting All Light Consoles That Use Dmx 512 Standard Data Transmission. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of 50 Mm Outside Dia. Double Wall Corrugated Pipes (Dwc) For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete For Both Power And Dmx. (As Per Actuals Depending Upon The Site Condition) , Supply Installation Testing and Commissioning of Ip65 I Power Connectors Having 3/4 Pole Cable Connector, Chuck Type Strain Relief, Current Rating 20 A Rms Continuous, Easy And Extremely Precise Locking System Quick Lock High Impact Materials - Long-Lasting And Reliable , Supply Installation Testing and Commissioning of Ip65 I Dmx Connectors Having 3/5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of 5 Pin Xlr Male Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of 5 Pin Xlr Female Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, Solder Stop For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. , Supply Installation Testing and Commissioning of Power Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options. - 12 Nos Of 6/10A Sp Outgoing Mcbs. - 1No Of 32A Tpn Incoming Mcb. , Supply Installation Testing and Commissioning of Ip Driver Box Made Up Of Pvc / Upvc And Ivory Connectors For The Internal Terminations And External Outgoing Connecting Points, Fiber / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. , Supply Installation Testing and Commissioning of Dmx Isolator Or Splitter Provides Isolated Optical Dmx Splitter Provides 8 Outputs From A 1 Input And Input Voltage: Ac 110 To 220 V, 50 Hz, Product Features: Group 1 & Group 8 Dmx Signal Change. , Supply Installation Testing and Commissioning of Din Rail Mount Dmx Controller Can Be Used To Control A Wide Variety Of Different Dmx Systems- From Rgb/Rgbw To More Advanced Moving And Color Mixing Luminaires, Dmx Audio Players And Fountains. The Controller Comes With A Variety Of Features, Iphone/Ipad/Android Remote Control, Wi-Fi Facilities, Dry Contact Port Triggering And Flash Memory.Usb Connection • 1024 Dmx Channels Universe In Live Mode (Computer) • 8 Dry Contact Trigger Ports Via He10 Connector • Stand Alone Mode With 5 Area And 90+ Scenes, Mac Osx 10.6/10.7/10.8 - Windows Xp/Vista/Seven/8 32/64 Bits And Usb 2.0, Xlr3, Mini Usb, 1 He10, Power From 5V To 5.5V Dc (Ac/Dc Adapter In Option. , Supply Installation Testing and Commissioning of Programming Charges , Supply Installation Testing and Commissioning of Additional Accessories For Installing The Lights As Per The Final Drawing/Site Condition Consisting Of Clamps, Brackets, Angles, Conduits, Joints, Hardwares Like Fasteners, Nut & Bolts Etc., , Street Light Panel: Supply, Installation, Testing And Commissioning Of Lt Panel Ip- 67 Outdoor Type,Floor Mounted Panel, Shall Be Suitable For 415 V, 3 Phase, 4 Wire, 50Hz Supply System. With 3 Phase Energy Meter And 100A Tpn Mcb As Incommer And 11 Nos Of Tpn Mcb As Outgoing With 3 Numbers Of Microcontoller Based Programmable Digital Almac Timer As Directed By Engineer In-Charge
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Goa View Result →
26.
Educational and Research Institute #11169723 AOC
Purchase Of Three Seater Desk Cum Bench , Computer Lab Work Stations And Chairs For Class Rooms, Teaching Block-Ii At Chaudhary Ranbir Singh University, Jind , Student Desk Cum Bench Specifications: The Class Room Desk Consists Of Front Desk, Middle Row Comprising Of Seat For Front Desk, Back Supported & Jointed With It The Desk Behind For Another Seat, Back & Another Desk For The Person Sitting Behind And So On Till The Last Row Which Shall Consist Of Seat Only, Provided With Back Support. Thus The Desking System Shall Consist Of One Row Of Front Desk, Several Rows Of Middle Seat & Back Desk & Again One Last Row Of Back Seat. The Front Edges Of Mdf Board Shall Be Post Formed And All Other Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue.Mdf Board Shall Have .8 Mm Thick Laminate On Top, Front And Rear. Underside Of The Table Shall Be Finished With 0.6 Mm Thick Balancing Laminate Of White Colour. A. Front Desk: Top Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Top Of Front Desk Shall Be 25Mm Thick Mdf Laminated On Both Sides As Mentioned Above. The Storage Shelf And Front Cladding Will Consist Of 18 Mm Thick Mdf Board Laminated As Mentioned Above.The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Mdf Board 18 Mm Thick. All The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere. Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. , B. Middle Seat & Desk: Shall Consist Of Seat, Back & Writing Shelf Behind And Storage Shelf Below It. The Detail Specifications Will Be As Under: Seat Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. Back Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Seat, Back & Writing Desk Shall Be 25Mm Thick Mdf Laminated On Both Sides, Top Laminate & Balancing Laminate On Back As Mentioned Above. The Storage Shelf Will Consist Of 18 Mm Thick Mdf Board Laminated As Mentioned Above. Theall The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere. Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Epoxy Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. Writing Shelf Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Mdf Board 18 Mm Thick. , C. Last Row: (Back Row) The Last Row Consists Of Seat & Back Only Mounted On 50 X 25 X 1.6Mm Thick Crca Pipe Frame. Back Row Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Back Row Shall Be 25Mm Thick Mdf Laminated As Mentioned Above. The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Mdf Board 18 Mm Thick. All The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere. Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Epoxy Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. Note: 1 Crca Steel Pipes Shall Be Of Tata/Jindal Or Equivalent. 2. All Pre-Laminated Mdf Boards Shall Be Of Action Tesa/Marino/Godrej Make. 3. The Front Edges Of Mdf Board Will Be Post Formed. 4. Pvc Lipping 2 Mm Thick Will Be Provided On Remaining Edges. , Supply And Installation Of Work Stations - 900W X 600D Providing And Placing Tile Based Modular Workstation, With Partitionthickness As 50-60 Mm And Ht -1200 Including Powder Coated Aluminium Trims.Tiles On Main Spine: Combination Of Top Tiles Are Plb/Fabric Tackable/Whiteboard Tile. Bottom Tiles - Plain Metal. Fin: 50-60 Mm Thick Panel Formed Out Of Blocks Which Are 2X9 Mm Thick Plb Boards Wrapped With Laminate At Intermediate Block And Top Block. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Decorative Laminate/White Board. System Shall Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finish. (Decorative Laminate) Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. The Partition Has Two Integrated Raceway Provided One At Skirting Level And Another At The Work Surface Level Thus Ensuring Separation Of Power And Networking Cables. Necessary Cut Outs For Switches And Switches As Per Site Requirement Will Be Provided. Cost Of Wires Not To Be Considered In Furniture. Work Surface - Made Of 25 Mm Thick Pre-Laminated Particle Board Confirming To Is:12823 Interior Grade With Post Forming On Front Only Of Size 900 Mm W X 600 Mm. Pvc Edge Binding Tape 2 Mm Thick Will Be Provided In Balance Sides. Note: All Partitions And Side Panels Have Leveling Screws For Adjustment In Case Of Uneven Floor To Take Care Of +/- 20 Mm Of Uneven Flooring.Raceway:-The Raceways Are Made Out Of 0.8 Mm Thick Crca & Powder Coated. The Electrical Raceway Can Be Provided Below Worktop Or Above Worktop, These Are Hook On Type Which Will Be Mounted On The Verticals. The Skirting/Data Raceway Is Hollow And Will Be Mounted On The Raceway Channels Cpu Trolley Fixed Type:Cpu Trolley: The Metal Tray Is Made Of 1.0 Mm Thick Crca Sheet And Side Support Is Made Of 0.8 Mm Thick Crca Sheet. On Wall Side (With Common Side Partition Sharing) , Back To Back (With Common Side Partition As Well As Common Central) , Chairs For Computer Lab Work Stations Without Arm: Specifications Upholstered With Fabric, High Resilience Polyurethane Foam, Fixed Type Mechanism, Tubular Frame. Back: (W) 39.0 Cm X (H) 38.0Cm, Seat: (W)45.0Cm X (D) 42.0Cm Overall Dimensions Of Chair Scat Height -45.0Cm. Height -81.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-56.0 Cm And Depth-54.0 Cm. The Seat Shall Be Made From 1.2 +/- 0.1Cm. Thk. Hot Pressed Plywood And Back Shall Be Injection Moulded From Black Co-Polymer Polypropylene Upholstered With Fabric And Moulded Polyurethane Foam Together With Seat And Back Covers. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Dimensions Of Seat Shall Be 45.0Cm (W) X 42.0Cm. (D) And Of Back Shall Be 39.0Cm(W) X 38.0Cm (H). The Seat And Back Covers Shall Be Injection Moulded In Black Co-Polymer Polypropylene. The Hr Polyurethane Foam Shall Be Moulded With Density 45 +/-2 Kg/M3 And Hardness Load 162 Kgf As Per Is:7888 For 25% Compression. The Fixed Type Mechanism Shall Be Without Back Tilt. The Tubular Frame Shall Be Made Up Of Dia 2.54 ±0.03Cm. X 0.2 +0.016Cm.Thk. M.Ser.W. Tube And Black Powder Coated (Dft 40-60 Microns). The Overall Dimensions Of Chair Shall Be Seat Height - 45.0Cm, Height -81.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-56.0 Cm And Depth-54.0 Cm.
Contract Date: May 26, 2026 Contract Value : ₹ 53.97 Lakh
Boards / Undertakings / PSU No of Bidders 7
Haryana View Result →
West Bengal View Result →
28.
Defence #11125474 AOC
Bids Are invited for PROVISION OF WOOD PLASTIC COMPOSITE DOOR DECORATIVE TYPE FINISHING WITH POLYRETHANE FINISH MATERIAL AND ABSOLUTE 100 PERCENTAGE WATERPROOF AND TERMITE PROOF SUITABLE FOR CONSTANT WATER EXPOSURE - PROVISION OF WOOD PLASTIC COMPOSITE DOOR DECORATIVE TYPE FINISHING WITH POLYRETHANE FINISH MATERIAL AND ABSOLUTE 100 PERCENTAGE WATERPROOF AND TERMITE PROOF SUITABLE FOR CONSTANT WATER EXPOSURE INCLUDING REPLACEMENT OF DAMAGED , COMPREHENSIVE INTERIOR FINISHING WITH ANTI DUST WEATHER RESISTANCE EMULSION PAINT OVER WALL CARE PUTTY AND ACCENT PANELING OF WALL FOR AN ELEGANT FINISH WITH LOVERS AND CHARCOAL MICA , PROVISION OF GLASS FIBRE REINFORCED GYPSUM FALSE CEILING TILES OF SIZE 595X595 MM MOISTURE RESISTANCE WITH HUMIDITY TOLERANCE WITH REMOTE CONTROL ILLUMINATION , AESTHETIC REFURBISHMENT OF BALCONY AND PASSAGE AREA WITH PROTECTIVE COATING SMOOTH PLASTER FINISH AND DECORATIVE WALL TEXTURE , PROVISION OF MODULAR WALL MOUNTED DISPLAY UNIT FABRICATED FROM HIGH QUALITY PLYWOOD WITH LAMINATE FINISH MATCHING THE INTERIOR , CUSTOM DESIGNED BAR COUNTER SETUP CRAFTED WITH AESTHETICS SET UP SPACE DESIGNED FOR SOCIAL GATHERINGS 4FT X 6FT AND 03 BAR STOOLS MATCHING THE DECOR , REPLACEMENT OF ALL CONVENTIONAL BIB COCKS WITH SENSER BASED FITTINGS FOR HANDS FREE OPERATIONS AND PROVISION OF JACUZZI INSTALLATION IN BATHROOM FOR RELAXATION BATH , PROVISION OF JACUZZI INSTALLED IN BATHROOM FOR RELAXATION BATH , PROVISION OF BACKLIGHT MIRRORS IN THE DRESSING TABLE REFURBISHMENT OF DRESSING AREA WITH ALL CUPBOARDS AND LIGHTING MIRROR FOR WASHROOMS OF VIP CABIN 1 AND 2 , PROVISION OF HUGE NEW CHESTERFIELD FOR LIVING DINING AND BED ROOM EITH OCCASIONAL TABLE , PROVISION OF COLOUR COORDINATED WINDOW AND DOOR DRAPERY HYDRAULIC OPERATED WITH DOUBLE LINED FABRIC MATCHING PELMETS INCLUSIVE OF END FITTINGS 9FT X 8FT , FINAL CLEANING POLISHING AND TESTING OF ALL FITTING AND FURNITURE ENSURING A UNIFORM FINISH AND READY FOR OCCUPATION CONDITION Total Quantity : 5320
Contract Date: Ref. Documents Contract Value : ₹ 40.17 Lakh
Government Departments No of Bidders 9
Odisha View Result →
29.
Communications and Information Technology  #11109623 AOC
Miscellaneous Civil Maintenance Work At Webel Bhavan And Monibhandar-Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge.(White cement, synthetic adhesive and grout material to be supplied by the contra concrete. With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. Deep Colour & White. (Fixing may be done on floor, skirting, riser, tread etc.) (Any size / Any color as decided by the WBEIDC Engineer.) (All floors). Approved brand Kajaria, Nitco, Johnson, Somany or any other brand as approved by WBEIDCL. 2 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]. The rate is inclusive forprefinished, grinding and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone. (Fixing may be done on floor, skirting, riser, tread etc.)(Any size as decided by the WBEIDC Engineer.) (All floors) 3 Supplying, fitting & fixing 1st quality Ceramic tiles in floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Coloured decorative or White (Johnson / Kajaria / NITCO / Somany), at all floors. 4 Removal of rubbish,earth, garbage (dry or wet), dismantled toilet fixtures, trees, grasses etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. 5 Applying interior grade Acrylic primer & Acrylic Emulsion paint, including putty, of approved quality & brand on plaster or concrete surface old or new surface including scraping & preparing the surface throughly, complete as per manufacturers specification & as per direction of EIC. (Solvent based interior grade Acrylic Primer & Paint is standard Quality). (One coat of primer + Two coats of paint). (ICI / Asian Paint or any other brand as approved by WBEIDCL). 6 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. & Painting 2 coats of any shades (as decided by the WBEIDCL Engineer) on steel & metal surface with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (ICI / Asian Paint or any other brand as approved by WBEIDCL). 7 Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) 8 Major repairing & refixing of False Ceiling with existing materials made of G.I. Frame structure & Gypsum Board tiles having stated specification . Struacture : Pre-coated main Tees shall be suspended from RC slab soffit at 600 mm c/c with the help of soffit cleat, bullets, GI angles & GI wire of 6 mm dia (hanger rod). Fixing point : For suspending the metal grid should be @ 1220 mm c/c & 600 mm apart. Pre-coated cross Tee section snap fixed at 600 mm / 1200 mm to form 600 mm x 600 mm & 600 mm x 1200 mm grid respectively. 9 Supplying, fitting & fixing High Pressure steam Cured Non Asbestos fibre cement standard ceiling board (Density > 1300Kg per Cu.m. ) of size595mm X595mm conforming IS 14862 and type B, catagory III of ISO 8336, tested as per AS-1530 Part 3 and BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid T-2430). At any floor & any location. Armstrong, Gypstone, Lafarge-Boral Gypsum India P. Ltd.(La-gyp), Saint-Gobain Gyproc India ltd.(India Gypsum Ltd.), Ramco Hilux Calcium Silicate Board & Tiles (Ramco Industries Ltd.), Gypstone Building Products P. Ltd., Aerolite Ceiling Systems, R. K. Ceilings pvt. Ltd, Everest Industries Ltd. The rate is inclusive of necessary rectification of the false ceiling frame work, if required. 10 Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 6 mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid. T-2430). At any floor & any location. 11 Godrej Hydraulic door closer fitted and fixed complete. Heavy type (I.S.I. size 3). (The rate is inclusive of dismantling / taking out of the existing one) 12 Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. Heavy type (I.S.I. size 3) 13 Anodised aluminium Aldrop / Sliding bolt of approved quality manufactured from extruded section conforming to I.S: specification (I.S: 2681/66) fitted and fixed with cadmiim plated screws. 250mm x 16mm dia bolt. (The rate is inclusive of dismantling / taking out of the existing one). 14 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: 150 mm grip x 12 mm dia rod. (The rate is inclusive of dismantling / taking out of the existing one) 15 Taking out shutter of aluminium glass door / window or wooden door, dismantling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging same with old fittings but with new screws as necessary. 16 Supplying Godrej mortice lock chromium plated with keys 6 levers including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one) 17 Supply, fitting & fixing of Door stopper.(Brass). (The rate is inclusive of dismantling / taking out of the existing one) 18 Supply, fitting & fixing of Door stopper.(Aluminium). (The rate is inclusive of dismantling / taking out of the existing one) 19 Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge. (The rate is inclusive of dismantling / taking out of the existing one) 20 Supplying, fitting fixing I.S.I. approved quality and brand hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-incharge. (The rate is inclusive of dismantling / taking out of the existing one) 21 Repairs to floor spring including removal and rehanging of shutters, replacement of damaged main spring, oiling and adjusting as necessary including taking out and refitting the same. 22 Supplying, fitting & fixing concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge. 200 mm long. (The rate is inclusive of dismantling / taking out of the existing one) 23 Supplying, fitting and fixing of Godrej Multi Lock or equivallent. 24 Supplying of Godrej multipurpose lock / cabinet lock including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one) 25 Supplying of Godrej cylindrical lock including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one) 26 Supply & installation of lock for steel almirah. The rate is inclusive of replacement of old / damaged lock system entirely with the new one. As per approved brand. 27 Supply & installation Top patch with pivot. The rate is inclusive of carefully removal of old Top patch pivot from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL. 28 Supply & installation Bottom patch lock. The rate is inclusive of carefully removal of old Bottom patch lock from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL. 29 Supply & installation Top & Bottom pivot for floor spring. The rate is inclusive of carefully removal of old pivot from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL. 30 Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303, 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-inCharge. 12 mm. Approved brand CenturyPly & GreenPly. 31 Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle / MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. Glossy/Matt/Suede excluding surface texture or metallic lustre. Thickness of laminate 1.0 mm. Approved brand CenturyLaminate & GreenLam or any other brand as approved by WBEIDCL. 32 Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 4 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass) 33 Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass) 34 Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 6 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass) 35 Supply & installation of stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White). 300 mm long 36 Supply & installation of stainless steel handle for casement window as per approved brand as directed by Engineer- in -charge. (Natural White). 37 Supply, fitting & fixing of wheel of revolving chair. The rate is inclusive of removal of existing wheel from the chair. Brand Godrej. 38 Supply, fitting & fixing of handle of revolving chair. The rate is inclusive of removal of existing handle from the chair. 39 Supply, fitting & fixing of hydraulic of revolving chair. The rate is inclusive of removal of existing hydraulic from the chair. Brand Godrej. 40 Supply, fitting & fixing of seat & back cover (clothes) for Multi task / Revolving / Executive chairs, using approved cloths. The rate is inclusive of removing the old clothes if required. 41 Supply & installation for 18 gauge brass plate, name / matter eaching as per our requirement. 42 Supply & fixing clear acrylic sheets plate back side vinyl cutting & pasting as per your matter. 43 Supply, fitting & fixing of venetian blind / roller blind with necessary frame work. At any floor & any loaction. The rate is inclusive of removal of existing blind if required. Brand, color, model, design will be decided by WBEIDCL. 44 Supplying, fitting and fixing bib cock or stop cock. Chromium plated Angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). (The rate is inclusive of dismantling / taking out of the existing one) 45 Closed seat of approved make with lid & C.P. Hinges, rubber buffer & brass screws supplied, fitted & fixed complete. Plastic (hollow type) Black or white or color matched with the WC. (The rate is inclusive of dismantling / taking out of the existing one) 46 Supplying, fitting and fixing alloy iron with brass spindle bib cock / stop cock of approved brand and make, spray painted and tested to 21kg per sq. cm. 15 mm. 47 Supplying,fitting and fixing cast iron P trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. 100 mm 48 Supplying,fitting and fixing cast iron S trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. 100 mm 49 Supply, fitting & fixing of Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook (Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). The rate is inclusive ofremoval of old one. 50 Supply, fitting & fixing of CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No. 5041 & Model - FLORENTINE of JAQUAR or similar brand) & removal of old one. 51 Supplying, fitting and fixing Flat back urinal in white vitreous chinaware of approved make (Parryware or Hindware) in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 635 mm X 395 mm X 420 mm. (Brand : CERA, Parryware, Hindware, Ivory / white in colour, Model: Capriana, cat no: S4020112 or equivalent). 52 Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Brand : CERA, Parryware, Hindware, Ivory / white in colour, model: CHIVAS, cat no B1010104.) 53 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (P or S trap). (The rate is inclusive of dismantling / taking out of the existing one). (Brand : CERA, Parryware, Hindware, CONVENTIONAL Ivory / white in colour) 54 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (The rate is inclusive of dismantling / taking out of the existing one) 55 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. For Concealed Work. CPVC Pipes Class-1,SDR-11. 15 mm. 56 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. For Concealed Work. CPVC Pipes Class-1,SDR-11. 20 mm. 57 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. For Concealed Work. CPVC Pipes Class-1,SDR-11. 25 mm. 58 Refixing G.I. pipe with fittings after cleaning where necessary. 15 mm / 20 mm / 25 mm 59 Supplying,fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long. (The rate is inclusive of dismantling / taking out of the existing one) 60 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 450 mm long. (The rate is inclusive of dismantling / taking out of the existing one) 61 Supplying, fitting & fixing Aluminium domical grating. 100 mm. (The rate is inclusive of dismantling / taking out of the existing one) 62 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 100 mm. (The rate is inclusive of dismantling / taking out of the existing one) 63 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 80 mm. (The rate is inclusive of dismantling / taking out of the existing one) 64 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 65 mm. (The rate is inclusive of dismantling / taking out of the existing one) 65 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 50 mm. (The rate is inclusive of dismantling / taking out of the existing one) 66 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 40 mm. (The rate is inclusive of dismantling / taking out of the existing one) 67 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 32 mm. (The rate is inclusive of dismantling / taking out of the existing one) 68 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 25 mm. (The rate is inclusive of dismantling / taking out of the existing one) 69 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 20 mm. (The rate is inclusive of dismantling / taking out of the existing one) 70 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 15 mm. (The rate is inclusive of dismantling / taking out of the existing one) 71 Supply fitting and fixing U.P.V.C. pipes for above ground work (soil/ wastewater line) including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages including the cost of masonry or concrete work, if necessary and cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. UPVC pipes (B Type) (dismantling of old C. I. fittings and disposal included) & fittings conforming to IS-13592-1992, (Make: Supreme). Dia 110 mm 72 Supply & installation of plastic soap dispenser. (400 ml capacity). Model, make & design will be decided by WBEIDCL. 73 Cleaning, removing of mud and disinfecting above 2000 litre Water Tank with appropiate method,including masonry reservoir. The rate is inclusive of dewatering reservoir / tank using pump before starting of the job. 74 Moni Bhandar Building 75 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing of rubbish beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. 76 Dismantling all types of masonry, cement concrete plain or reinforced, stacking serviceable materials at site and removing of rubbish beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. At any floor & any location. 77 Brick work with 1st class bricks in cement mortar (1:6). All floors & all types od structures. (Any floors & any location). 78 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. (Any floors & any location) 79 Plaster (to wall, floor, ceiling etc.) with sand & cement morter incl. Rounding off or chamfering corners as directed & raking out joints or roughening, nosing & drip course where necessary to all floors. With 1:6 cement sand morter. 15 mm thick plaster. At any floor & any location. 80 Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge.(White cement, synthetic adhesive and grout material to be supplied by the contra concrete. With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. Deep Colour & White. (Fixing may be done on floor, skirting, riser, tread etc.) (Any size / Any color as decided by the WBEIDC Engineer.) (All floors). Approved brand Kajaria, Nitco, Johnson, Somany or any other brand as approved by WBEIDCL. 81 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]. The rate is inclusive forprefinished, grinding and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone. (Fixing may be done on floor, skirting, riser, tread etc.)(Any size as decided by the WBEIDC Engineer.) (All floors) 82 Supplying, fitting & fixing 1st quality Ceramic tiles in floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Coloured decorative or White (Johnson / Kajaria / NITCO / Somany), at all floors. 83 Removal of rubbish,earth, garbage (dry or wet), dismantled toilet fixtures, trees, grasses etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. 84 Applying interior grade Acrylic primer & Acrylic Emulsion paint, including putty, of approved quality & brand on plaster or concrete surface old or new surface including scraping & preparing the surface throughly, complete as per manufacturers specification & as per direction of EIC. (Solvent based interior grade Acrylic Primer & Paint is standard Quality). (One coat of primer + Two coats of paint). (ICI / Asian Paint or any other brand as approved by WBEIDCL). 85 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. & Painting 2 coats of any shades (as decided by the WBEIDCL Engineer) on steel & metal surface with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (ICI / Asian Paint or any other brand as approved by WBEIDCL). 86 Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) 87 Major repairing & refixing of False Ceiling with existing materials made of G.I. Frame structure & Gypsum Board tiles having stated specification . Struacture : Pre-coated main Tees shall be suspended from RC slab soffit at 600 mm c/c with the help of soffit cleat, bullets, GI angles & GI wire of 6 mm dia (hanger rod). Fixing point : For suspending the metal grid should be @ 1220 mm c/c & 600 mm apart. Pre-coated cross Tee section snap fixed at 600 mm / 1200 mm to form 600 mm x 600 mm & 600 mm x 1200 mm grid respectively. 88 Supplying, fitting & fixing High Pressure steam Cured Non Asbestos fibre cement standard ceiling board (Density > 1300Kg per Cu.m. ) of size595mm X595mm conforming IS 14862 and type B, catagory III of ISO 8336, tested as per AS-1530 Part 3 and BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid T-2430). At any floor & any location. Armstrong, Gypstone, Lafarge-Boral Gypsum India P. Ltd.(La-gyp), Saint-Gobain Gyproc India ltd.(India Gypsum Ltd.), Ramco Hilux Calcium Silicate Board & Tiles (Ramco Industries Ltd.), Gypstone Building Products P. Ltd., Aerolite Ceiling Systems, R. K. Ceilings pvt. Ltd, Everest Industries Ltd. The rate is inclusive of necessary rectification of the false ceiling frame work, if required. 89 Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 6 mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid. T-2430). At any floor & any location. 90 Godrej or equivalent Hydraulic door closer fitted and fixed complete. Heavy type (I.S.I. size 3). (The rate is inclusive of dismantling / taking out of the existing one) 91 Anodised aluminium Aldrop / Sliding bolt of approved quality manufactured from extruded section conforming to I.S: specification (I.S: 2681/66) fitted and fixed with cadmiim plated screws. 250mm x 16mm dia bolt. (The rate is inclusive of dismantling / taking out of the existing one). 92 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: 150 mm grip x 12 mm dia rod. (The rate is inclusive of dismantling / taking out of the existing one) 93 Taking out shutter of aluminium glass door / window or wooden door, dismantling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging same with old fittings but with new screws as necessary. 94 Supplying Godrej mortice lock chromium plated with keys 6 levers including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one) 95 Supply, fitting & fixing of Door stopper.(Brass). (The rate is inclusive of dismantling / taking out of the existing one) 96 Supply, fitting & fixing of Door stopper.(Aluminium). (The rate is inclusive of dismantling / taking out of the existing one) 97 Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge. (The rate is inclusive of dismantling / taking out of the existing one) 98 Supplying, fitting fixing I.S.I. approved quality and brand hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-incharge. (The rate is inclusive of dismantling / taking out of the existing one) 99 Repairs to floor spring including removal and rehanging of shutters, replacement of damaged main spring, oiling and adjusting as necessary including taking out and refitting the same. 100 Supplying, fitting & fixing concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge. 200 mm long. (The rate is inclusive of dismantling / taking out of the existing one) 101 Supplying, fitting and fixing of Godrej Multi Lock or equivallent. 102 Supplying of Godrej multipurpose lock / cabinet lock including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one) 103 Supplying of Godrej cylindrical lock including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one) 104 Supply & installation of lock for steel almirah. The rate is inclusive of replacement of old / damaged lock system entirely with the new one. As per approved brand. 105 Supply & installation Top patch with pivot. The rate is inclusive of carefully removal of old Top patch pivot from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL. 106 Supply & installation Bottom patch lock. The rate is inclusive of carefully removal of old Bottom patch lock from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL. 107 Supply & installation Top & Bottom pivot for floor spring. The rate is inclusive of carefully removal of old pivot from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL. 108 Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303, 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-inCharge. 12 mm. Approved brand CenturyPly & GreenPly. 109 Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle / MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. Glossy/Matt/Suede excluding surface texture or metallic lustre. Thickness of laminate 1.0 mm. Approved brand CenturyLaminate & GreenLam or any other brand as approved by WBEIDCL. 110 Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 4 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass) 111 Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass) 112 Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 6 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass) 113 Supply & installation of stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White). 300 mm long 114 Supply & installation of stainless steel handle for casement window as per approved brand as directed by Engineer- in -charge. (Natural White). 115 Supply, fitting & fixing of wheel of revolving chair. The rate is inclusive of removal of existing wheel from the chair. Brand other than Godrej. 116 Supply, fitting & fixing of handle of revolving chair. The rate is inclusive of removal of existing handle from the chair. 117 Supply, fitting & fixing of hydraulic of revolving chair. The rate is inclusive of removal of existing hydraulic from the chair. Brand other than Godrej. 118 Supply, fitting & fixing of seat & back cover (clothes) for Multi task / Revolving / Executive chairs, using approved cloths. The rate is inclusive of removing the old clothes if required. 119 Supply & installation for 18 gauge stainless steel plate, name / matter eaching as per our requirement. 120 Supply & fixing clear acrylic sheets plate back side vinyl cutting & pasting as per your matter. 121 Supply, fitting & fixing of venetian blind / roller blind with necessary frame work. At any floor & any loaction. The rate is inclusive of removal of existing blind if required. Brand, color, model, design will be decided by WBEIDCL. 122 Supplying, fitting and fixing bib cock or stop cock. Chromium plated Angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). (The rate is inclusive of dismantling / taking out of the existing one) 123 Closed seat of approved make with lid & C.P. Hinges, rubber buffer & brass screws supplied, fitted & fixed complete. Plastic (hollow type) Black or white or color matched with the WC. (The rate is inclusive of dismantling / taking out of the existing one) 124 Supplying, fitting and fixing alloy iron with brass spindle bib cock / stop cock of approved brand and make, spray painted and tested to 21kg per sq. cm. 15 mm. 125 Supplying,fitting and fixing cast iron P trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. 100 mm 126 Supplying,fitting and fixing cast iron S trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. 100 mm 127 Supply, fitting & fixing of Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook (Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). The rate is inclusive ofremoval of old one. 128 Supply, fitting & fixing of CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No. 5041 & Model - FLORENTINE of JAQUAR or similar brand) & removal of old one. 129 Supplying, fitting and fixing Flat back urinal in white vitreous chinaware of approved make (Parryware or Hindware) in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 635 mm X 395 mm X 420 mm. (Brand : CERA, Parryware, Hindware, Ivory / white in colour, Model: Capriana, cat no: S4020112 or equivalent). 130 Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Brand : CERA, Parryware, Hindware, Ivory / white in colour, model: CHIVAS, cat no B1010104.) 131 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (P or S trap). (The rate is inclusive of dismantling / taking out of the existing one). (Brand : CERA, Parryware, Hindware, CONVENTIONAL Ivory / white in colour) 132 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (The rate is inclusive of dismantling / taking out of the existing one) 133 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.). (For Exposed Work - 25 mm dia. medium quality) 134 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.). (For Exposed Work - 15 mm dia. medium quality) 135 Labour for dismantling G.I. pipe with fittings. 15 mm / 20 mm / 25 mm 136 Refixing G.I. pipe with fittings after cleaning where necessary. 15 mm / 20 mm / 25 mm 137 Supplying,fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long. (The rate is inclusive of dismantling / taking out of the existing one) 138 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 450 mm long. (The rate is inclusive of dismantling / taking out of the existing one) 139 Supplying, fitting & fixing Aluminium domical grating. 100 mm. (The rate is inclusive of dismantling / taking out of the existing one) 140 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 100 mm. (The rate is inclusive of dismantling / taking out of the existing one) 141 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 80 mm. (The rate is inclusive of dismantling / taking out of the existing one) 142 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 65 mm. (The rate is inclusive of dismantling / taking out of the existing one) 143 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 50 mm. (The rate is inclusive of dismantling / taking out of the existing one) 144 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 40 mm. (The rate is inclusive of dismantling / taking out of the existing one) 145 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 32 mm. (The rate is inclusive of dismantling / taking out of the existing one) 146 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 25 mm. (The rate is inclusive of dismantling / taking out of the existing one) 147 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 20 mm. (The rate is inclusive of dismantling / taking out of the existing one) 148 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 15 mm. (The rate is inclusive of dismantling / taking out of the existing one) 149 Supply fitting and fixing U.P.V.C. pipes for above ground work (soil/ wastewater line) including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages including the cost of masonry or concrete work, if necessary and cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. UPVC pipes (B Type) (dismantling of old C. I. fittings and disposal included) & fittings conforming to IS-13592-1992, (Make: Supreme). Dia 110 mm 150 Supply & installation of plastic soap dispenser. (400 ml capacity). Model, make & design will be decided by WBEIDCL.
Contract Date: May 18, 2026 Contract Value : ₹ 10.40 Lakh
Government Departments No of Bidders 2
West Bengal View Result →
30.
Defence #11104420 AOC
Tender For Repairs / Re-Novation Of Ofti And Ofti Work Shop Buildings Inside Factory Area At Ofmk.; 1 Site clearence 2 FELLING OF TREE: Felling of tree exc.30 cm and not exc.100 cm girth including cutting of trunk and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50m and clearing site 3 GRUBBING UP TREE TRUNK : Grubbing up tree trunk of girth exceeding 100 mm and not exceeding 150 mm, including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable materials and removing of unserviceable materials to a distance n. exc. 50 m and clearing site. 4 Demolition of cement concrete of any description and in any position not otherwise specifically provided for.Complete all as specified directed. 5 Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar. Complete all as specified directed. 6 Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Complete all as specified directed. 7 Dismantling floor,heartor wall tiling including cement mortar bedding but nor baking removing serviceable tiles to stores and rubbish off the premises.Complete all as specified directed and directed. 8 Taking down : Taking downcement or cement lime plaster, any description on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. 9 Removing building materials etc.other than spoilupto a distance of 1.0 Km, including loading, unloading and stacking at the destination. 10 Brick work with sub class ‘B’ bricks straight or curved in plan with 1:6 cement mortar.Complete all as specified and directed. 11 Stone Masonry : Walling of Squared Rubble regular coursed Stonemasonry, well bonded, bedded and solidly hearted built in with 1:6 cement mortar, Complete in all respects as specified and directed. 12 Damp proof course to horizontal or vertical surfaces In cement concrete 1:2:4, type B-0, 40 mm thickincluding necessary formwork . 13 Flush Pointing with 1:4 cement mortar to square rubble, coursed, well bonded and solidly hearted built in cement mortar as directed. 14 Vitrified tiles : Supply and laying of Light shade vitrified tiles 10 mm thick (Square/Rectangle) polished , area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Floor tile finishglossy/mat/ antiskid will be as decided by EIC. Complete all as specified and directed . Make : Johnson, Orient bell, AGL as approved by EIC. 15 GRANITE : S&F Granite 25 mm thk (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Complete all as specified and directed. 16 FLOOR TILING :Supply & fixing Coloured non skid ceramic tiles in flooring, 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell 17 SCREED BED : Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:6. Complete all as specified and directed. 18 Plastering : Rendering of 10mm thick plastering with 1:6 cement mortar on fair faces of brick work or concrete surfaces. Complete in all respects as specified and directed. 19 Rounding to edges of stone slabs / granite one edge,such as in steps, cooking platform, and other similar situations. Complete all as specified and directed. 20 Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc. complete as directed by EIC. 21 Taking down wooden wall panelling of any description and similar work as directed. 22 Snap grid : Supply and fixing of 605x605 mm snap gridGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners withand including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediatechannel with connecting clips across the intermediatechannel at 457 mm centre to centre. Complete all as specifiedand directed, Make : Armstrong 23 Supply and fixing of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. 24 POP ceiling : Providing 10 mm thick plaster of Paris(gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mmwith 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately). Complete all as specifiedand directed, Make : Armstrong 25 Ceiling board : (M&L) S&F Exposed metal frame ceiling with calcium silicate boardof siliceous and calcareous material reinforced with cellulose fibre / PVC laminated gypsum tiles with MPL film on rear side, 8 mm thk.for fixing in 600 mm x 600mm grid,Make: Gyproc/ La gyp 26 Door shutter repair : Taking down door shutter of any description exc. 1 sqm and not exc. 2 sqmand repairing and adjusting to the required size including fixing builders hard ware and refixing to the same opening. complete all as specified and directed. 27 Dismantlingof structural steel work including doors, gates, but excluding framed truss etc. Complete all as specified directed. 28 UPVC window / Ventelator : Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension . Complete all as specified and directed. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, 29 UPVC window : Three track three panels sliding window with fly proofS.S wire mesh (Two nos. glazed & one no. wire meshpanels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Areaof window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionof uPVC extruded glazing beads and uPVC extrudedinterlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy bodywith single nylon rollers (weight bearing capacity tobe 40 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, including drillingof holes for fixing hardwares and drainage of wateretc. After fixing frame the gap between frame andadjacent finished wall shall be filled with weatherproof silicon sealent over backer rod of required sizeand of approved quality, complete all as specified anddirected by Engineer-in-Charge. 30 UPVC door : Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proofS.S. wire mesh (Two nos. glazed & one no. wire meshpanels) made of (big series) frame 116 x 45 mm & sash46 x 82 mm both having wall thickness of 2.3+ 0.2 mm and single glazing bead/ double glazingbead of appropriate dimension. (Area of door above2.00 sqm upto 5.00 sqm) comprising of uPVCchambered frame, with in-built roller track and sashextruded profiles duly reinforced with 1.60 + 0.2 mmthick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), appropriate dimensionuPVC extruded glazing beads, uPVC extrudedinterlock and uPVC extruded Inline sash adaptor (ifrequired), EPDM gasket, wool pile, zinc alloy (whitepowder coated) handle with key on one side of extremepanels along with zinc plated mild steel multi pointlocking having transmission gear with keeps, zincalloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustabledouble nylon rollers (weight bearing capacity to be120 kg), G.I fastener 100 x 8 mm size for fixing frameto finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, including drilling ofholes for fixing hardwares and drainage of water etc.After fixing frame the gap between frame and adjacentfinished wall shall be filled with weather proof siliconsealent over backer rod of required size and ofapproved quality, complete all as specified anddirectd. 31 steel wire cloth : Supplying and Fixing in repairs stainless steel wire cloth0.36mm nominal dia.(Guage 28) of wire and width of aperture 1.4mm to wooden / steel doors/ windows, including fixing with and necessary screws, nut bolts,nails and removal of existing damaged cloth etc., complete all as specified and directed 32 Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.0 mm thick and glazing with oil putty in squareexc 0.5 sq. m in each pane. Complete all as specified and directed by EIC. 33 Sheet glass : Supply and fixing of Sheet glass, ordinary quality 4.8 mm thick and glazing with oil putty in squareexc 0.5 sq. m in each pane. Complete all as specified and directed by EIC. 34 Wooden Wall panelling : S & F of Prelaminated particle board18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. Complete as specified and directed at site. 35 Wooden panelling frame work : S&F of battens frame work using wooden clean sawn 2nd class soft wood battens of cross sectional area exc. 15 & not exc. 25 sq.cm at a spacing of 35 centres. Complete as specified and directed at site. 36 PCC paving : PCC 1:4:8 in floors/ pavingoftype D-2, 1:4:8 with 40mm graded aggregate,100 mm thick.Complete all as specified and directed. 37 Earth work in excavation in all kind of soils by mechanical means (Hydraulic excavator) means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge 38 Soling (or sub base) of spread thickness 150 mm with broken boulders or quarried stone, inter sticesfilled, surface formed and rolled and consolidated torequired gradient and camber. Complete all as specified and directed. 39 Hard core with broken stone/boulders of gauge not exc. 63mm, deposited, spread leveled in layers not exceeding 15 cm thick, and watered consolidated to required gradient & camber including watering. Complete all as specified and directed. 40 Moorum filling in floors or pavings laid in layers not exe. 15cm thick , spread leveled and rammed including watering. Complete all as specified and directed 41 Stone sett flooring (M&L) with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed. 42 Edge stones to flooring (M&L) with stone setts of size 250 to 300mm long x l50 to 200mm wide, and 450mm deep and and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush. Complete all as specified and directed. 43 PCC paving : PCC 1:2:4 in floors/ pavingoftype B-2, with 40mm graded aggregate, 100 mm thick. Including finishing concrete surface even and smooth surface without using extra cement.Complete all as specified and directed. 44 Wearproof topping 20 mm thick using CC 1:2:4, as specified incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (except metallic hardner). Complete all as specified and directed. 45 Supply of metalic floor hardener 46 Surface excavation not exceeding 30 cm deepand averaging 20 cm deep in hard / dense soil and getting out. Complete all as specified and directed 47 PCC FLOORING : Cement concrete of 100 mm thickness in floors, sub-floors, sub-bases, pavings etc. oftype B-1, 1:2:4 (20 mm graded aggregate) 48 Smoth finish : Finishing cement concrete surface even and smooth using extra cement. 49 CC Paver blocks : S&F of Machine pressed precastconcrete interlocking paver block any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement & pigment (Coloured)Complete all as specified and directed. 50 CC chequered tiles :S&F of cement concrete chequered tiles with grey pigment cement and pigments(Coloured tiles) for pavements. size of tile 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors.Complete all as specified and directed. 51 PCC paving : PCC 1:3:6 in floors/ pavingof type C-2, with 40mm graded aggregate, 100 mm thick.Complete all as specified and directed. 52 Forming 12mm thick Expansion joints for 100 thick slabsfilled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A. ’ Complete all as specified and directed. 53 Structural steel (S&F) : Structural steel work confirming to Fe-410 W (Gde-E-250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, including application of one coat of Zinc chromate primer paint .Make:TATA, Jindal 54 Structural steel (S&F) : Structural steel work Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Steel confirming to Fe410W (Gde E-250 quality A). Make : TATA, Jindal, Complete all as specified directed. 55 Structural steel (S&F) : Mild steel bolts. purpose made. of dia. of neck n.exc. 12 mm with hexagonal orsquare head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long. Complete all as specified directed. 56 Roofing sheet : Supply and fixing of pre painted galvalume aluminium zinc coating GI basedcorrugated/ trapezoidal profile roofing sheets of thickness 0.5 mm having tensile strength of 550Mpa as in roof covering / cladding to wall with self tapping screws etc. Make : TATA / Jindal /Essar. Complete all as specified and directed. 57 Supply only of liquid water proofing compound for incorporating concrete.Make. Fosrac, BASF, SIKA 58 PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate)in in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating. complete as specified and directed. 59 Kerb stone : Providing precast cement concrete using Type-B1, 1:2:4 20 mm graded aggregatein window or doorcills, lintels, bressumers, steps, quoin blocks (for use with ma- sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets,etc. with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar 1:4. Complete with joints to match . Complete all as specified and directed. 60 PCC : Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate)in roofkerbs or mud stops, rounded orchamfered on edges.complete as specified and directed. 61 PCC : Plain Cement Concrete (1:2:4) Type B2 using 40 mm graded aggregate in foundations, floors, filling and mass concrete, Complete all as specified and directed . 62 RCC : Reinforced cement concrete (Type B1, 1:2:4 with 20 mm aggregates) in columns, pillars, piers, posts etc. Complete all as specified and directed. 63 REINFORCEMENT : Mild steel(TMT) bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. Complete all as specified and directed. . 64 CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 100 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed. 65 SWG PIPE : Supply & fixing of 100 mm dia Salt Glazed Stoneware drain pipes Grade A, including laying in proper slopes, including jointing with cement and jute complete all as specified and directed. 66 CEMENT CONCRETE BEDDING (M&L) : Providig Cement concrete bedding for Drain Pipes of internal dia 150 mm with PCC 1:4:8, type D2 including forming cradles etc. Thickness of PCC bed is 100 mm and width 400 mm complete all as specified and directed. 67 SWG PIPE : Supply & fixing of 150 mm dia Salt Glazed Stoneware drain pipeslaid in trenches including laying in proper slopes, including jointing with cement and jute complete all as specified and directed. 68 Earth work in excavation of all kind of soils by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Complete all as specified and directed . 69 Returning, filling in of excavated soils, including spreading, levelling, watering and well ramming in layersnot exc 25 cm. 70 PVC PIPE : Supply and Fixing of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid or fixed to walls including necessary jointin with connected accessories like T, Y junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme. 71 PVC PIPE : Supply and Fixing of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls including necessary jointin with connected accessories like T, Y junctions, sockets, bends etc. complete all as directed. Make: Sudhakar/ Nandi/ Supreme. 72 Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit iring, etc., and making good, cutting not exc 10 cm girth. Complete all as specified and directed. 73 Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat surfaces. Complete all as specified and directed. 74 S & F ofG.I. Tubes of Size 40 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches. 75 S & F ofG.I. Tubes of Size 25 mm dia, medium grade including all fittings to walls and ceilings or in floors/trenches. 76 S & F ofG.I. Tubes of Size 1/2‘’(15 mm), medium grade including all fittings to walls and ceilings or in floors/trenches. 77 Supply & Fixing Rotational moulded polyethylene water storage tanks (PVC cylindrical vertical with closed top) hoisted and fixed in position 1000 lit capacity. make : Syntex 78 BALL VALVES : 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. Complete all as specified and directed. 79 NAHANI TRAPS : Supply & Fixing ofCI Nahani traps 100mm with grating including jointing to went pipe with CC 1:2:4complete all as specified and directed at site. 80 GULLY TRAP : M&L for PVC/SWR gully traps, of size 125 mm x 110 mm all as directed and specified. 81 GRATING : Supply and fixing of grating doom 100 mm dia. of PTMT (min. weight 25 gms) 82 PVC D/E PIPE CONNECTION :Supply and fixing of PVC Double End Pipe connection.in repairs, size:15mm with end nuts & washers of length 600 mm. Make : Kohinoor. Complete all as specified and directed. 83 ALUMINIUMPARTITIONS : Supply and fixing complete of anodised aluminium powder coated frames for partition frames and windows etc. all complete as directed by E.I.C. 84 ALUMINIUM WINDOW SHUTTERS : Supply and fixing complete of anodised aluminiumwindow and ventilator shutters powder coated fixed type without sash bar ,aluminium section weighing 0.55 kg/m including necessary jointig cleats, glazing clips, rubber neoprane packing, handles 2 nos. in each door, hinges, anodised aluminiumsnap beading, screws etc. complete all as directed by E.I.C. 85 HINGES : Supply and fixing of extruded Al. alloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed typeB-21 of size 125mmincluding all as specified and directed . 86 Antique aldrop : Supply and fixing of 200 mm long Antique model Brass mixed heavy alloy, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.All as specified and directed and as approved by EIC. 87 Brass hinge: Supply and fixing of extruded brassalloy with GI Mild Steel Hinge Pine anodised Butt Hinges and fixed typeB-11 of size 125mmincluding.All as specified and directed and as approved by EIC.. 88 Antique tower bolt : Supply and fixing of Antique model Brass mixed heavy alloy, barrel tower bolts of extruded section of size 200 mm and fixed all as directed.All as specified and directed and as approved by EIC. 89 Antique Door handle : Supply & fixing of Extruded Antique model Brass mixed heavy alloy, cast type polished bright handles 150 mm long, Complete all as specified and directed 90 TOWER BOLT : Supply and fixing of Aluminium anodised, barrel tower bolts of extruded section of size 200 mm and fixed all as directed. 91 BOW HANDLE: Supply & fixing of Extruded aluminium alloy handles 150 mm long, fabricated type, anodised. Complete all as specified and directed 92 Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be easured separately), removing materials to store for keeping in safe custody for reuse at site and making good. 93 Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) 94 point wiring:S&F / Drawing of cables in PVC pipe,OneLight point or onefan point controlled by one switch with cables 1.5 sq.mm size of copper conductor cables FR PVC single core sheathed cable 95 point wiring: S&F / Drawing of cables in PVC pipe, One 3 pin socket outlet 5 amps independent, with cables 1.5 sq.mm size of copper conductor cables FR PVC sheathed. 96 point wiring: S&F /Drawing of cables to One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq.mm size of copper conductor cables FR PVC sheathed. 97 point wiring: S&F / Drawing of cables in PVC pipe, One 3 pin socket outlet 15 amps independent, with cables 4.0 sq.mm size of copper conductor cables FR PVC sheathed. 98 S & F of ceiling rose,3 phase/PVC/Polycorbonate, Isolate body 99 S & F ofswitch modular type of one module, 6 amps 100 S & F ofsocket, 2/3 pin combined, 6 amps, 2 Module 101 S & F ofswitch modular type of one module, 16 amps 102 S & F ofsocket, 2/3 pin combined, 16 amps, 2 Module 103 S & F ofFan step regulator 120 W, 2 Module 104 LED LUMINAIRE :Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/ Halonix 105 S & F of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. 106 S & F of LED tube lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 107 LED Street Light :Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make: Philips/CG/Wipro/ Osram/ Havells/ Orient/Halonix.complete all as specified and directed 108 Exhaust Fan: Supplyand Fix Exhaust Fan made of sturdy Engineering plastic complete with Lauvers, Shutteers, voltage 230 V,50 HZ, RPM 1200, Copper winding ofsweep 250mm.complete all as specified and directed. 109 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) 110 Industrial socket plug: Supply and fixing of 240 V, 20 amps, single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB. 111 MCB :Supply and fixing of MCB / Isolator, 240 V, single pole 40 amp 112 MCB :Supply and fixing of MCB / Isolator, 240 V, double pole 40 amp 113 MCB D.B : S & F of Sheet Metal enclousers for D.B ofsingle doorof SPN,8 way with 200A rated bus bar,240V 114 MCCB: Suppply and fixing of MCCB 3 pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA. 115 S & F of Modular metal flush box 6 module 116 S & F of Modular white cover plate with frame 3 module 117 S & F of Modular white cover plate with frame 4 module 118 S & F of Modular white cover plate with frame 6 module 119 S & F of Modular white cover plate with frame 8 module 120 EARTHING : Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead GI strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.complete all as specified and directed 121 Earth continuity conductor : Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm GI strip. complete all as specified and directed 122 Dismantlng ofAsbestos cement (corrugated,semi corrugated, etc.) sheets in roofcoverings. Sheets shall be deposited to stores as directed. 123 Cutting or uprooting grass on old CC/brick tiles or on old mud phuska,and Taking down old Taf felt and loose material from the roof, cleaning the bitumen surface by wire brushing, washing down & disposing the pealed off tar felt muck etc. for complete as directed. removing rubbish off the premises, cleaning surface and preparing to receive new mud plaster. Complete as specified and directed. 124 Surface painting : Removal of old tarfelt sheets,Wire brushing and cleaning top surface of roof tops and surface painting, with a layer of bitumen primer for bitumen membrane @ 0.50 ltr/sqm by the same membrane manufacturere of density at 25° C, 0.87-0.89 Kg/ltr and viscosity 70-160 cps and then left the surface 4 to 8 hours for drying.Complete as specified and directed. 125 Bitumen Tack coat / Seal coat : Applying surface bitumen coat Seal / Tack coatwith lndustrial bitumen 85/25 forwaterproofingtreatments at the rate of 1.2 kg / sqm . 126 Water proofing treatment (M&L) : Rendering water proofing treatment to RCC roof slabs including vertical surfaces with APP based polymetric membrane sheet, minimum 3 kg/sqm and minimum 3.0 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) evenly laid on primed surfaces by forced applicationby torch on treatment. The vital physical and chemical parameters of the membrane shall be : Tensile strength in longitudinal and transverse direction at 23° C as 650/450/5 cm.Tear strength in longitudinal and transverse direction as 300/250 N. Softening point of membrane not less than 150° C. Cold flexibility shall be up to 2° c when tested in accordance with ASTM, D-5147. The laying of membrane shall be done through the authorised applicator of the manufacturer of membrane. Membrane make : STP / Dr. Fixt / IWL as approved by EIC. 127 Carrying and disposal of debris : Removing building materials etc. to a distance of 1.5 KM or under including loading, unloading and stacking at the destination. Complete all as specified and directed at site. 128 Rolling shutter : S&F ofSteel rolling shutters 1.25 mm thickness of lathe, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle. Complete all as specified and directed. 129 Rough excavation notexceeding1.5 m deepin drains etc in loose/soft soils andgetting out 130 Scarifying : Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc.400 sqm and the thickness Exc 50 mm and n.exc 100 mm deep 131 Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Complete all as specified and directed. 132 Macadam : Premix bituminous, macadam with paving bitumen any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less).Complete all as specified and directed. 133 Pot holes : Repair to pot holes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth,making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadamusing paving bitumen, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings,6.3 mmsizeand again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm.Complete all as specified and directed. 134 Preparing Black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.Complete all as specified and directed. 135 Applying evenly a priming/tack coat with bituminous primer using paving bitumen at 5kg per 10 sq metre. Complete as specifiedand directed. 136 Bituminous premixed carpet, 2.5 cm consolidated thickness, with 0.34 cu.m. of stone chippings mixed with 18.25 kg of binder (paving bitumen)per 10 sq.m and mixed in mechanical hot mix plant and laid with mechanical paver and rolled using power roller 8-10 T capacity and compacted to required camber and gradient to uniform smooth surface. Complete as specifiedand directed. 137 Supply and fixing of Machine cut cudappah stoneslab 20-25mm thick over cementscreed base, laid and jointedwith grey cement slurry mixedwith pigment to match the shadeof the slab including rubbingand polishing complete. 138 Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint and application of priming paint plaster coat. 139 Rendering synthetic enamel painting on new Steel surfacesof any description over 10 cm width or girth- TWO coats including one coat of red oxide Zinc chrome paint. Make: Asian paints/Berger 140 Complete removal existing treatment of of white washing onsurfaces of walls/ concrete. 141 Complete removal existing treatment of of white washing on surfaces of ceilings. 142 CHALK WHITENING : M&L - Chalk whitening (white cement-based, water-resistant, white wall putty) of plastered surfaces as preparatory to distempering on wall surfaces, Make : Birla wall care, complete all as specified & directed. 143 PRIMER : Priming plastered and other surfaces with alkali resistant priming paint. Make : Asion/Dulux- all as specified and directed . 144 WHITEWASH ON CEILINGS : M&L - White washing on ceilings- on old decorated surfaces- including preparation of surfaces – ONE coat of White Wash-complete all as directed. 145 WHITEWASH ON WALLS : M&L - White washing on Walls – on old decorated surfaces- including preparation of surfaces - TWO coats of White wash - complete all as directed. 146 PLASTIC EMULSION PAINT:Rendering plastic emulsion painting on old surfaces- including preparation surfaces on walls- TWO coats of plastic emultion paint-complete all as directed. Make: Asian -Apcolite / Dulux-promise. 147 OBD : M&L - Rendering Oil Bound Distempering on old surfaces -including preparation of surfaces on walls - TWO Coats of OBD - complete all as directed. Make : Asian-tractor Uno / Berger-Butterfly / Indigo-gold. 148 External weather proof painting on walls : Material & Labour for applying Two or more coats of 100% Premium acrylic weather proof emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces. all as specified and directed, Brand : Asian apex,Berger weather shield, Nerolac Rain coat. 149 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting onOld painted Steel surfaces- surfaces of any description over 10 cm width or girth including preparation of surfaces-TWO Coats- all as specified and directed- Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 150 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting on Old painted Steel surfaces- surfaces of any description n.exc 10 cm width or girth including preparation of surfaces- TWO Coats- all as specified and directed- Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 151 ENAMEL PAINTING : M&L - Rendering synthetic enamel painting on wooden surfaces - old surfaces of any description over 10 cm width or girth including preparation of surface - TWOCoats- all as specified and directed-Make: Asian-Apcolite / Berger-Luxol / Dulux-Glass. 152 FRENCH POLISHING : French polishing on old surfaces of any description, width or girth –including cleaning and preparing the surface- One or more coats. all as specified and directed. Make : Sheenlac, sealer 153 Supply and fixing of Safety lever locks mild steel with 4 levers for rolling shutters as directed. 154 Fan Hook: Supply and Fixing of Fan hook with double anchor bolt complete fixing as per instructions of EIC. 155 IWC : IWC of approved make fixed with P trap Make: Hindware/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed. 156 CONCEALED FLUSHING SYSTEM : Wall mounted concealed flushing system (including frame, control plate and installation kit) with dual flush mode of capacity 10 ltrs. Make: Jaquar(Solo)/ Parryware(Prime)/ Cera(Fountain). Complete all as specified and directed. 157 MIRROR : Mirror 5 mm thk. with bevelled edge fixed with concealed screws Make: Saint Gobain/ Nilkamal/ Casa Gold. Complete all as specified and directed. 158 Switch board box with frame plate and cover plate , metal flush box18 module: Supply and Fixing of covering plates with Metal Flush box andcover plate frames of 18 module of make Legrand/ Schneider/ Havellscomplete all as specified by the EIC 159 Concertina coil & 6 straight RBT strands : Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina cross type fencing, GI steel plate & GI core wireon wall top using concertina coils stretched to approx.6 meters length at site and clipped with three nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as C clips, R.B.T clips etc.). Including additional three horizontal R.B.T strands to be fixed with vertical portion of MS angle supports as directed in site. Complete all as specified and directed at site. 160 Accoustic sheets : supply and fixing of choice colourPolyester Fiber Acoustic Board / tiles, Thickness: 12mm, for insula-tion and accoustic purposes, 60x60 cm in size, fixed to wall / ceiling surfaces on snap grid orwith nails to timber frame work or with Z bar/clips etc as specified by manufacturer.Complete all as specified and directed. 161 Floor mat: supply and fixing of choice colourNylon carpet for floors minimum 6 mm thicknesshaving better accoustic co-efficient ,fixed to floor with approved adhesiveas specified by manufacturer.Complete all as specified and directed. 162 ACP wall lining : Supply and fixing of decorative choice colour solid finished Aluminum composit panel 4.0 mm thick sheeting on external wall surfaces upto 12.0 mter heights fixed over aluminium/MS framed wall surfaces as specified by manufacturer. Cost includes ACP panel, frame work, jointing glue and scafolding etc. Complete all as specified and directed. 163 UPVC window (Single glazed panel shutter & fixed wire mesh panel): Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series)frame 47 x 50 mm & sash 47 x 68 mm both havingwall thickness of 1.9 ± 0.2 mm and single glass paneglazing bead of appropriate dimension (Area ofwindow upto 0.75 sqm.) comprising of uPVC multi-chambered frame, sash and mullion (where everrequired) extruded profiles duly reinforced with1.60 ± 0.2 mm thick galvanized mild steel sectionmade from roll forming process of required length(shape & size according to uPVC profile), uPVCextruded glazing beads of appropriate dimension,EPDM gasket, stainless steel (SS 304 grade) frictionhinges, zinc alloy (white powder coated) casementhandles, G.I. fasteners 100 x 8 mm size for fixingframe to finished wall, plastic packers, plastic capsand necessary stainless steel screws etc. Including SS wire mesh panel with aluminium beeding fixed to outer face window using adjustable /removable clips. Profile offrame & sash shall be mitred cut and fusion weldedat all corners, mullion (if required) shall be alsofusion welded including drilling of holes for fixinghardwares and drainage of water etc. After fixingframe the gap between frame and adjacent finishedwall shall be filled with weather proof siliconsealant over backer rod of required size and ofapproved quality, complete all as specified anddirected by Engineer-in-Charge. 164 WALL TILES : Supply & fixing of Coloured digital glazed ceramic tiles in vertical surface 300x600 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. Make: Johnson/ Kajarai/ Orient Bell. 165 PVC door frame : S & F of solid WPVC Door Frame of size 100x60 mm heavy density of 11100 kg/cum and high quality PVC laminated of choice colour. Complete all specified and directed. 166 PVC door shutter : S & F of Factory Made Solid WPVCDoor Shutter with wood free EPS, 32 mm thick, heavy density 700 kg/cum and high quality PVC laminated on both side of choice colour. 167 Staircase railing : Supply and fixing of designed Stainless steel hand railing not less than 0.8 mtr height for stairs, balconies etc. using SS grade 304/316 members for balusters & rails etc. and covered with 12 mm thick tampered toughned glass. Design & model shall be as decided by EIC. Cost inclusive of glass, design and other mountings. Complete all as specified and directed. 168 Handicap grab bar : S&F of stainless steel anti slip vertical swing handicap bath room grab bar/rail with paper holder of min. 1.0 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 169 Handicap grab bar : S&F of stainless steel anti sliphandicap bath room grab bar/rail of 1.0 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 170 Handicap grab bar : S&F of stainless steel anti sliphandicap bath room grab bar/rail of 0.45 mtr long. including all necessaryt fitting accessories Make : Jaquar, Hindware as directed.Complete as specified and directed at site. 171 Wood Door : Supply and fixing of modern & designer soildTeakwood door shutters for Main Doors 32 mm finished thickness as decided by EIC . 172 EWC : Supply and fixing ofItalian Collection ceramic Floor Mount Western Commode, Rim less, One-piece for Bathrooms with Syphonic vortex Flushing system and soft closing seat cover including connection pipe.Make : Jaquar Fusion, Hindware Fabio, Cera cinova 173 WASH BASIN : Supply and fixing of Under counter Wash basin rectangle of approved make along with waste coupling, waste pipe and connection pipe, brackets etc. Make : Jaquar(Continental)/ Cera(campa)/ Parryware(Aqiline). Complete all as specified and directed. 174 URINAL : Supply and fixing ofSensor Urinal pan of approved make with auto flushing system including connection pipe, waste coupling and waste pipe Make: Jaquar(Aquisense)/ Parryware(Prime)/ Cera(Clair). Complete all as specified and directed. 175 PILLAR COCK : S&F ofsensorbased table top model Pillar cock with auto closing system of make: Jaquar / Hindware/ Cera. Complete all as specified and directed. 176 CONCEALED STOP COCK : S&F of CP Concealed stop cock of make : Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 177 2 WAY ANGLE COCK : S&F ofCP 2 way angle cock Make: Parryware(Uno)/ Cera(Fountain)/ Jaquar(Solo). Complete all as specified and directed. 178 EWC JET FAUCET : S&F of EWC jet faucet of make: Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 179 BIB COCK : S&F ofCP Bib cock of make: Jaquar(Solo)/Parrywaare(Uno)/ Cera(Fountain). Complete all as specified and directed. 180 SOAP DISH : S&F of SS soap dish of make Jaquar(Solo)/ Parryware(Uno)/ Cera(Fountain). Complete all as specified and directed. 181 Hand drier: Supply and fixing of plastic Automatic Hot air drierfor bath rooms of approved make. Make :Orchid / Dolphy / Bajaj. Complete all as specified and directed. 182 Liquid soap dispensar: Supply and fixing of Liquid soap dispensar for bath rooms of approved make. Make :Jaquar / Orchid / Dolphy. Complete all as specified and directed. 183 Toilet paper holder: Supply and fixing of stainless steel single toilet paper roll holder of approved make. Make :Jaquar continental / Parryware sigma/ Cera Icon. Complete all as specified and directed. 184 Urinal partition : Supply and fixing of HPL (High-Pressure Laminate) urinal partitions using 12 mm thick compact board of width 400 to 500 mm and height 1200 mm of approved make and fixing with stainless steel brackts. Complete all as specified and directed. 185 Bldg.Expansion joint : Preparation of joint by grinding of groove surfae, remoal of dust, providing polymer mixed cement mortar on both sidea of groove and crack filling if any in floor level, fixing of baker rod 25x25 mm to control depth of groove, Providing and applying Nitoseal PU50 of Fosroc or equivalant having MAF 25% or above to the groove 25x12 mm. Including fixing / covering of joint with APP based polymetric membrane sheet sufficient width. Complete all as specified and directed at site. 186 Forming V grooves on granite surfacesn,exc 10mmdeep and n exc 10mm on face in steps, cooking platform, and other similar situations etc. 187 Hiring / Engage of JCB for cleaning, moving and loading materials like sand, gravel, or demolitionand removal of debris and other miscellaneous purposes as directd. The rate includes diesel and driver required to run the vehicle. 188 Carpet grass : Supplly and laying of carpet grass on levelled soil surface including preparing the soil bedby loosning the base ground 100 mm thick and removing old unwanted grass if any and necessary watering as directed. 189 Supply and laying of red earth / soil in loose state which is free from debris, grass and other vegitation to be used for gardening purposes as directed. 190 Architectural design : Before commencement of work Contractor should take architectural consultancy servies for entrance arch at the entrance gate, building front elevations and garden designs by authorised institutions / authorised Designer. Complete all as directed by EIC
Contract Date: May 16, 2026 Contract Value : ₹ 3.98 Crore
Government Departments No of Bidders 4
Telangana View Result →
31.
Communications and Information Technology  #11103053 AOC
Tender For Misc furniture works at IT Dept. in Moni Bhandar Building-- 1 Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303, 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-inCharge. 12 mm. Approved brand CenturyPly & GreenPly. 2 Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303, 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-inCharge. 19 mm. Approved brand CenturyPly & GreenPly. 3 Supplying of Godrej multipurpose lock / cabinet lock including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one) 4 Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals). Other Local Wood. 5 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete. Without base. 100 mm grip x 10 mm dia rod. As per approved brand. 6 Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position and other fixing items like, the cost of hinges and other fittings. 35mm thick shutters (single leaf). Approved brand CenturyPly & GreenPly. 7 Godrej Hydraulic door closer fitted and fixed complete. Heavy type. 8 Supply, fitting & fixing of Brass door stopper. 9 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5 mm thick clear glass. 10 Supplying, fitting & fixing Stainless Steel D or H type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN - 1154, of approved quality of reputed brand as per direction of Eingineer-in- Charge fitted and fixed complete including all incidental charges. 11 Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. Glossy/Matt/Suede excluding surface texture or metallic lustre. Thickness of laminate 1.0 mm. Approved brand CenturyLaminate & GreenLam or any other brand as approved by WBEIDCL. 12 Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. Approved brand Asian Paints, Dulux & Berger Paints. 13 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On timber or plastered surface. With other than hi-gloss of approved quality. Two coats. Approved brand Asian Paints, Dulux & Berger Paints. 14 Supply & installation of Telescopic Channel for drawer purpose.
Contract Date: May 18, 2026 Contract Value : ₹ 1.74 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
32.
Drinking Water Supply and Sanitation #11088063 Price Bid
Rates Invited From The Bonafide Agencies For The Under Mentioned Works (Rates Invited For Official Use Only) (Rates Offered Should Be Excluding Gst And Cess) Under Alipore Division, Phe Dte. (Part-I)- 1 Fabrication of wall pannel with 12 mm thick BWR plywood of IS710 grade over a wooden frame work of 600mmx600mm made with 50mmx40mm wooden batten (Malasiyan sal, Pine) duly fitted and fixed to brick walls with proper leveling and verticality jand covering the surface with PVC louvered pannel of size 200mmx2400mm with 12 mm overlap on either side duly fixed with synthetic resin (hytax) including the cost of all materials, labour charges, carriage etc. all complete (excluding GST and labour welfare cess) 2 Fabrication of wall pannel with 6 mm thick BWR plywood of IS710 grade over a wooden frame work of 600mmx600mm made with 50mmx40mm wooden batten (Malasiyan sal, Pine) duly fitted and fixed to brick walls with proper leveling and verticality jand covering the surface with 1.5 mm thick decorative laminate duly fix with synthetic adhisive (Fevicol ) including the cost of all materials, labour charges, carriage etc. all complete (excluding GST and labour welfare cess) 3 Fabrication of wall pannel with 12 mm thick BWR plywood of IS710 grade over a wooden frame work of 600mmx600mm made with 50mmx40mm wooden batten (Malasiyan sal, Pine) duly fitted and fixed to brick walls with proper leveling and verticality jand covering the surface with 1.5 mm thick decorative laminate duly fix with synthetic adhisive (Fevicol ) including the cost of all materials, labour charges, carriage etc. all complete (excluding GST and labour welfare cess) 4 Charges for dismanteling the outer units of existing damage A.C. andspecial installatiion of 6 nos.A.C.with additional copper pipe and insulation of about 70 ft.and repairing the old existing A.C. (4 Nos.) andre-installation the same as and where required. (the rates to be quoted including the cost of materials, labour charges, carriage upto site etc. all complete. excluding GST & Labour Welfare Cess. ) 5 Supplying fitting and fixing stainless steel sinage board for the office chamber of the Executive Engineer, of letter font size 8 and 5 height (ALIPORE DIVISION PHE DTE.) including the cost of carriage upto work site but excluding GST & Labour Welfare Cess. 6 Supplying, fitting and fixing of one District Map board of size 5-0x5-0 made up of MDF board, withengrave map boundaries and embossed lettering suly painted with P.U. coating, as per departmental design including the cost of materials, labour charges, and carriage etc. all complete but excluding GST & Labour Welfare Cess.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
33.
Drinking Water Supply and Sanitation #11088061 Price Bid
Rates Invited From The Bonafide Agencies For The Under Mentioned Works (Rates Invited For Official Use Only) (Rates Offered Should Be Excluding Gst And Cess) Under Alipore Division, Phe Dte. (Part-Iii)- 1 Supplying, fitting and fixing 5 mm thick coloured lacqured glass supported by 5 mm thick toughend float glass duly sandwiched and fitted with extruded male - female coupling aluminium frame on all side as and where requiredincluding fitting and fixing of epdm gasket, application of silicon etc. all complete as per direction of EIC. (The rates to be quoted including the cost of materials, labour charges, carriages, loading and unloading upto site excluding GST & Labour Welfare Cess.) 2 P.V.C wall panneling with PVC Louvered channels, of size 200 mm x 2400 mm 1.5 mm thick over pre-fabricatged 6 mm thick wall panelling fixed on wooden frame, as per direction of EIC. The PVC pannels to be fixed with synthetic resin (HITAX), cleaning the surface properly etc. all complete as per direction of EIC. (The rates should be given including the cost of materials, labour charges, carriage upto the site, loading and unloading excluding GST & Labour Welfare Cess.) 3 Supply, Fitting, Fixing wall cabinet made of 19mm water proof plywood and block board,conforming IS710 of approved make, 6mm back, outside P.U. coating, high gloss buffing for smooth finish andinside fixing 0.8 mm thick white laminate and making necessary partition wich 19 nmm thick ply as per drawing and design of EIC orglass (if required) etc. and necessary fittings including auto hinge,handle, wadrobe lock all complete as per direction of EIC. (The rate to be offered including the cost of materials, labour charges, carriage upto site, loading and unloading, excluding GST & Labour Welfare Cess.) (Measurement taken on the basis of two longer dimension.) 4 Supply, Fitting, Fixing wall cabinet made of 19mm water proof plywood and block board,conforming IS710 of approved make, 6mm back, outside coloured decorative laminate andinside fixing 0.8 mm thick white laminate and making necessary partition wich 19 nmm thick ply as per drawing and design of EIC orglass (if required) etc. and necessary fittings including auto hinge,handle, wadrobe lock all complete as per direction of EIC. (The rate to be offered including the cost of materials, labour charges, carriage upto site, loading and unloading, excluding GST & Labour Welfare CESS.) (Measurement taken on the basis of twolonger dimension) 5 Supply, Fitting, Fixing table cabinet / secretariat table made of 19mm water proof ply board conforming IS710 of approved make, outside sunmica lamination, / teak ply and inside providing 0.8 mm thick white laminate, glass top & wheel for movement (if required) etc. and necessary fitting including handle, lock all complete as per direction of EIC. 6 Supply, fitting and fixing of printed sinage boards of size 6x14 of acrylic plate, fixed with vynile sticker displaying the message as per design of the department. 7 Supplying, fitting and fixing of one office board of size 3x5 made up of acrylic board, with acrylic plate lettering duly fixed withsynthetic resin, as per departmental design including the cost of materials, labour charges, and carriage etc. all complete but excluding GST & Labour Welfare Cess. 8 Suppling, fitting and fixing of window curtain with curtain rod, runners etc. all complete, including the cost of materials, and stiching charges etc. all complete as per direction of the EIC but excluding GST & Labour Welfare Cess, 9 Supply of official chair (non revolving) with side handle, of approved make and brand, including carriage uptosite, but excluding GST & Labour Welfare Cess.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
34.
Tourism #11085444 Technical Bid
Tender For Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer. , Supplying And Filling Moorum In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry In Cement Mortar 1:3 (1Cement : 3 Coarse Sand) With Bricks Of Class Designation 75 Kg /Cm2. B. Upto Floor V Level. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: All Work Up To Plinth Level , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: In Retaining Walls , Return Walls(Any Thk) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Providing And Laying In Position Ready Mixed Concrete (Rmc) Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continious Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Suspended Floors, Roofs, Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates. Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only , Extra To Be Added For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De- Shuttering And De-Centering At All Levels, Over A Height Of 3.5M, For Every Additional Height Of 1M Or Part Thereof. (Plan Area To Be Measured) Suspended Floors, Roofs, Landings, Beams And Balconies (Plan Area To Be Measured) , Providing Tmt Steel Reinforcement Bars Of Sail, Tata, Vizag Made Only (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. Minimum Grade Of Steel - Fe 500 , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4B Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint.In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Colour Coated Galvulium Roofing Sheets Of 0.5Mm Thickness Including All The Accessories (Tata Make) But Excluding The Cost Of Purlins, Rafters, Trusses, Flashings Etc. Complete As Per The Directions Of The Engineer In Charge. , Providing & Fixing In Position Galvalume/Zincalume Flashings, Cappings, Ridges, Gutters Upto 600Mm/610Mm Girth And Min 3.00M In Length (Cold Rolled Steel 550 Mpa Yeild Stress Astm A 446 Grade E) With Hot-Dip Metallic Coating Of Aluminium-Zinc Alloy(Az 150 Galvalume) (150 Gms/Sqm Total Of Both Sides With Al-Zn Composition= 55% & 43.5% Resp. & 1.5% Si Conforming To Astm 792/ As 1397) 0.45 Mm Base Metal Thickness And 0.50Mm Total Coated Thickness, Factory Cut At All Heights For Roof, Side & Gable Cladding Complete In All Respects With Az 150 Gsm Smp Color Coated (20Mic Exterior Coat Of Silicon Modified Polyester Paint System Over 5 Mic Primer And 5 Mic Polyester Back Coat Over 5 Mic Primer) Incl. Fixing To Purlins With No 12X14X55Mm Mechanically Galvanised Hex Head Self Drilling Screws Of The Best Quality As Per As-3566 Class 3-4 Approved, Which Should Be Compatible To Be Used With Sheets. With Integral Washers And Epdm Seals Etc. Silicon Sealant Non-Hardening Neutral Cure Type Shall Be Applied At All End Laps, Complete As Directed. , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. Plain Grill , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc.With Hairline Finish, Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excludingfixingaccessoriessuchasnuts,Bolts, Fasteners Etc.). , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. Light Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Jet Black With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. ( Price Range 2000 To 2100 Rs Per Sq Mtr.) , Providing And Fixing Granite Stone Slabs (Mirror Polished) 18Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On Cement Paste And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. Jet Black , Providing And Laying Polished Granite Stone Flooring, Coping In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building, All Complete As Per The Architectural Drawings, With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade, Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. Polished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. ( Price Range 1550 To 1600 Rs Per Sq Mtr.) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm .80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Fixing 18Mm Thick Polished Black Granite Machine Cut For Kitchen Platforms, Counters, Window Sills, Door Frame, Urinal Partitions , Fascia And Similar Locations Of Required Size Of Approved Shade, Colour And Texture Laid Over 20Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing,Moulding And Polishing To Edge To Give High Gloss Finish, Etc. Complete At All Levels.( Price Range Rs.1500 To Rs.1700 Per. Sq.M ) , Providing 25Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. Size 60 Cm L X45 Cm H X 15 Cm T , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand). 20 Mm Thick. , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 (1 Cement: 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , 12 Mm Thick Cement Plaster 1:4 (1 Cement:4 Fine Sand) , 6Mm Thick Cement Plaster To Ceiling With 1:3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer , Extra For Plastering Done On Moldings, Cornices, Or Arch It Raves Including Neat Finish To Line And Level. In One Coat , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing & Fixing 19Mm Thk Plywood Work In Frames Of Doors Using 19Mm Marine Ply (Waterproof) With All Hardware,And Other Frames And Fixed In Position With 50 Mm Fastners Etc. Complete As Specified As Shown In The Drawings. , Providing And Fixing First Class Indian Teak Wood Moulded Beading To Door And Window Frames With Iron Screws , Plugs And Priming Coat On Unexposed Surfaces Etc. 50X12Mm Size. , Providing And Fixing Block Board Flush Door Shutters 35Mm Thick ( 1St Class Teak Ply On Both Faces), Laminated On Both Sides With 1Mm Thick Laminate Of Approved Brand And Colour Including Cost Of Adhesive, Nails, Screws During Fixing Etc. Complete. , Providing & Fixing Bright Finished Stainless Steel Mortise Latch & Lock With 60 Mm Cylinder And A Pair Of Levers, Handles With Necessary Screws Etc.Complete , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete. 300X 16 X 5 Mm , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete Size 125 X 70 X 4.0Mm , Provided And Fixing 150 Mm Chromium Plated Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutters Thickness Complete. , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete. 200 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading, Transportation, Unloading, Levelling Etc At The Risk And Cost Of Agency / Contractor Including Selection Of Site For Disposal With All Lifts And Leads Etc. All Complete. , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And Fixing Of Aluminium Window With 3 Tracks And 2 Shutters Sliding Window With Tobular Frame Ployster Powder If Thicness 75-80 Microns With Approved Standard Accessaries Such As Ball Beaing Rollers, Concealed Lock, 6Mm Thick Plain Clear Glass With Epdm Beading Etc. , Drilling 150 Mm Deep Hole In R C C And Grouting The Rebar With Lockfix Etc Complete. 10 Mm Dia , Drilling 150 Mm Deep Hole In R C C And Grouting The Rebar With Lockfix Etc Complete.12 Mm Dia , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design , Dismantling Steelwork In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates Bolts, Nuts, Cutting Dismembering And Staking Within 50 Mts. Lead Extra For Dismantling Trusses, Rafters, Purlins Etc. Of Steel Work, For Every Additional Span Of One Meter Or Part Thereof Beyond 10 Mts. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Doors, Windows And Clearestory Windows (Steel Or Wood) Shutters Including Chowkhats Architrave Holdfast Etc. Complete And Staking Within 50 Mt. Lead. Of Area 3 Sq.M. And Below , Dismantling Wood Work Of Area Below 40 Sq.Cm. Wrought Framed And Fixed In Frames, Other Frames And Trusses Including Stacking Of Material Within 50 Mts. Lead , Dismantling G.I. Sheets Roofing Including Ridges, Hips Valleys And Gutters Etc. And Stacking The Material Within 50 Meters Lead. , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Main Entrance Gate In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Mahadev Big Mural In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Nandi In Frp As Per Tender Drawing , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Laying 300X350X160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 75 Mm Gap Between Two Stone For Grassing.Gaps To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.(Price Including Stone,Gardening Soil,Fertilizers And Grass Etc Complete) , Supplying And Stacking Of Good Earth ( Garden Soil) At Site Including Royalty And Carriage Upto 1 Km. (Earth Measured In Stacks Will Be Reduced By 20% For Payment). , Spreading Of Sludge, Dung Manure Or/And Good Earth (Garden Soil) In Required Thickness (Cost Of Sludge, Dung Manure Or/And Good Earth To Be Paid Separately). , Supply At Site Of Work/Store Deoiled Neem Cake Duly Packed In Used Gunny Bags As Per Mort & H Specification 308.2 , Supplying Of Sludge Duly Stacked At Site/Store As Per Mort & H Specification 308.2 , Filling Mixture Of Earth & Sludge Or Manure In The Desired Proportion In Trenches Flooding With Water And Leveling (Cost Of Supplying Earth And Sludge Or Manure And Mixing Excluded). , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Rubra , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Saraca Ashoka , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neem , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Nyctanthes , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Peltophorum Pterocarpum , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Bauhinia Purpurea , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Filliciam Decipiens , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cordia Dichotoma , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cassia Fistula , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Millingtonia Hortensis , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Jacaranda Mimosifolia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neolamarckia Cadamba , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Thevetia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Michelia Champaca , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Alba , Supplying & Planting Shrubs, Creepers, Ground Covers, As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. , Providing And Fixing White Vitreous China Type Water Closet Squatting Pan (European Type W.C. Pan) With Dual Flushing (Citren Nelson/ Similar)With Stop Cock Wall Flanges Flush Pipe Or Elbow And Vacuum Breaker Coupling Etc. Including Cutting Making Good The Walls And Floors Where Required. (Excluding Handicap Toilets) , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430 X 260 X 350 Mm And 340 X 430 X 265 Mm Sizes Respectively With Pvc Automatic Flushing Cistern With Fittings, R.S. Or C.I. Brackets, Standard Size Galvanized Steel Flush Pipe And Spreaders With Brass Unions & G.I. Clamps Complete, Including Painting Of Cistern And Fittings, Cutting And Making Good The Walls And Floors Where Required. (A)One Urinal Basin With 5 Liters P .V .C. Automatic Flushing Cistern. , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Including Cutting And Making Good The Walls Where Required. Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws. Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Wall Mixer With 3 In 1 System With 115Mm Long Bend Pipe For Connection To Over Head Shower Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing C.P. Brass Towel Rail Complete With C.P. Brass Brackets Fixed To Wooden Cleats With C. P. Brass Screws. 750X20 , Providing & Fixing Soap Dish Chromium Plated With Brackets Fixed To Wooden Cleats With Cp Brass Screw , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed .110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed. 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating.110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door :110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door :110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75Mm , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door 110Mm , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door . 75Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Providing And Fixing R.P.V.C. Vent Cowl: 75Mm , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Cm2 In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10Cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar. , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:.B) 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. 32Mm Outer Dia. , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : (Toilet Internal Ball Valve, 15Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : (Toilet Internal Ball Valve, 40 Mm Nominal Bore . , Providing And Fixing Non-Return Valve Of Approved Quality :40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality .25 Mm Nominal Bore , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 25 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 32 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 40 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 50 Mm , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701;1996. 1000 Lit. Capacity , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Of Concealed Type Step Light With 6W Led Lamp Die-Cast Aluminium Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs. At L70B50, Including Driver By Making Necessary Arrangement/Recess In Wall To Make It Flush With Surface ,Ip Rating : Ip 67 ,Ik10 Rated , Connecting Wire, Including Gear Box And Junction Box For Cable Connection Complete And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Wall Mounted Street Light Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6M. In Length Complete. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Thd0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70B50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10Cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-15 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -6 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And 3 Phase Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (B) 10 To 40 A , Supply, Installation, Testing And Commissioning Of 3 Kva 1 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (C) 6 Way (8+18), Double Door, Horizontal Type Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. (E) Tpn, Cat A , Supplying And Fixing Following Rating Four Pole (Triple Pole And Neutral) 415 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm(Ground To Db) , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (C) 6 Module (200Mm X 75 Mm) Cat A , Supplying & Erecting Of Led 9 To 10W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying And Erecting Outdoor Square / Circular Max. 20 W Pendent Light With Having Pressure Die-Cast Aluminium Housing, Polystyrene Diffuser Having System Lumens Output Of Min. 2000 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Max. Ripple Of 5%, Thd10%, P.F. 0.95, Operating Range Of 120-270V, Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70B50 Including Driver, Having Mounting Arrangement With Board For Surface Type Or Suspended Accessories Complete. , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supply And Erecting Fan Hook Box ( 100 Mm Diameter Or Equivalent Square Size, 75Mm Deep) Fabricated Out Of 16 Swg Sheet Steel With 10 M Round Bar Hook Bounded To Reinforced Cement Concrete Steel Upto 50 Mm Length Protruding On Each Side Of The Box, Including Painting With 2 Coats Of Red Oxide, Complete As Required. , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Gi Pipe Medium Class 25 Mm (Civil Gsr 1034 (F)(Iii))
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Goa View Result →
35.
Housing Urban and Rular Development #11029052 Technical Bid
Tender For Addition/Alteration And Other Allied Works Of Rsq 15 At Rehari, Jammu. Cno- 11 Np- 1 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Meters Lead. 2 Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. 3 Providing And Laying Full Body Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1Cement :4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete. 4 Providing And Fixing Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations, Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour Or Shade. 5 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 6 Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm (Thickness To Be Specified By The Manufacturers) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.(Somany, Kajaria Or Equivalent). 7 Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Meters Lead : : Of Area Of 3 Sqm. And Below. 8 12Mm Cement Plaster Of Mix: 1 : 6 ( 1 Cement : 6 Coarse Sand). 9 6 Mm Cement Plaster To Ceiling Of Mix 1 : 3 (1 Cement : 3 Fine Sand). 10 Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per I.S. 13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : Kitchen Sink With Drain Board 510X1040Mm Bowl Depth 250Mm. 11 Providing And Fixing Of Water Proof Flush Door 34Mm Thick With 1.00 Mm Thick Laminate (Green, Century Or Equivalent)/ Veener On Both Sides Including Lipping, Painting/ Polishing, Hinges, Tower Bolts, Door Stopper, Mortize Lock (Harrison, Godrej Or Equivalent)..Inxluding Stainless Steel(Grade Ss:304) T Profile In Grooves As Per Direction Of Eic. 12 Engaging Carpentar 1St Class. 13 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia And Length (Hold Fast Lugs Or With Dash Fasteners Shall Be Paid For Separately): Sal Wood. 14 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws.Second Class Deodar Wood 30 Mm. 15 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge : Second Class Deodar Wood. 16 Renewing Glass Panes, With Wooden Fillets Wherever Necessary : Float Glass Panes Of Thickness 5.0 Mm (Weight Not Less Than 12.5 Kg/Sqm) 17 P/F 4Mm Water Proof Ply On Wood Work Of Standard Make. Complete Job. 18 Providing And Fixing Decorative High Pressure Laminated Sheet Of Plain/Wood Grain In Gloss/Matt/Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is: 2046 Type S Including Cost Of Adhesive Of Approved Quality. 1Mm Thick. 19 Providing And Fixing Base Cabinets For Modular Kitchen Comprising Of Box Made With 18 Mm Bwp 710 Grade With Type A Bond (Phenol-Formaldehyde Resin) And Surface Of Plywood Having Both Side Laminates With Front Side Edge Bending Tape, Backing Made Of 6 Mm Acp Sheet Of Alstrong Make, Ss 90° Hinges With 0° Crank Like Kaff, Hafele Or Equivalent, Shutters With High Gloss Laminates With Four Side Edge Bending Tape, Superior Quality G/J Profile Handles, Accessories Include Matrixbox / Tandem Drawer Box, Pvc Cuttlery Tray, Dish Rack Complete. 100 Mm Adjustable Pvc Legs And 100 Mm Pvc Skirting With Brackets And Skirting Corner Including Cabinet Connector For Cabinet Fixing. Cabinet Depth 600 Mm.Includes L Shape Cr Unit. Complete Job As Per Directions Of Engineer In Charge. (Payment For Front Face Area Only). 20 P/F Almirah (2 Deep) With Backing Made Of 4 Mm Plain Solid Color Acp Sheet, Frame Work And Shutters With 19 Mm Superior ( Century, Green Etc.) Plywood. Including Finishing With Textured Matt Finished Laminate Of Min 1.00 Mm Thickness On Exterior And Plain White Laminate On Interior Surface, Matching Edge Bending Tape On Exposed Sections Of Plywood Any Any Design And Formation As Per Directions Of Engg. I/C. Work Includes Tower Bolts, Magnetic Catcher Incl Hanging Rods Sliding/ Hinged Mechanism With Protuded/ Flushed Premium Brass Handles 6\ And German Telescopic Channels For Drawers. Complete Job. 21 P/L/F 4Mm App Waterproofing Treatment (Primer And App Sheet) With Hot Torch Treatment And 2 Coats Pf Aluminum Paint Included. Complete Job. 22 Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 1 Mm Thick. 23 Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Liter Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour. Two Coats. 24 Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Liter, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. Two Coats. 25 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Internal Work Concealed Fixing The Pipe With Clamps At 1.00 Meter Spacing Including Cutting Chases And Making Good The Wall Etc. 15 Mm. 26 P/F 32 Mm Cp Brass (Jaquar Make) Basin Mounted Swivel Type Sink Mixer. Complete Job. 27 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank 28 P/F Concealed Body, Single Lever High Flow Divertor (Jaquar) Including Making All Connections And Making Good The Walls. 29 P/F Wall Mounted Hot And Cold Basin Mixer With Single Lever(Jaquar). 30 P/F 3 Way Concealed Divertor Shower System Set With Single Lever Mixer Bath Spout With Attached Telephonic Shower Resting On Wall Mounted Stand And Over Head Shower(Square 1X1)(Jaquar). 31 Providing And Fixing Floor Mounted, White Vitreous China Single Piece, Double Traps Syphonic Water Closet Of Approved Brand/Make, Shape, Size And Pattern Including Integrated White Vitreous China Cistern Of Capacity 10 Litres With Dual Flushing System, Including All Fittings And Fixtures With Seat Cover, Cistern Fittings, Nuts, Bolts And Gasket Etc Including Making Connection With The Existing P/S Trap, Complete In All Respect As Per Directions Of Engineer-In-Charge. (Jaquar) 32 P/F 5 Mm Bevelled Edge Looking Glass Fixed To Wall With Spacers And Ss Flat Head Screws. Complete Job. 2X2-0\X3-0\ 12.00 Sft 33 P/F 32Mm Cp Brass Angle Valve With Wall Flange. (Jaquar) 34 P/F Cp Brass Single Lever Health Faucet With Flexible Ss Cased Pipe And Wall Mounting Arrangement. 35 P/F Cp Brass Short Body Mm Nominal Bore Of Jaguar Or Equivalent Make 36 P/F Cp Brass Long Body Mm Nominal Bore Of Jaguar Or Equivalent Make 37 P/F 5Mm Thick Glass Shelf With Guard Rail, 600Mm Length.(Jaquar). 38 P/F Ss 600Mm Long Towel Rack With Sliding Hooks. (Jaquar) 39 P/F Frosted Glass Soap Dish With Wall Mounted Ss Frame Of Superior Make. (Jaquar) 40 P/F Forsted Glass Tumbler With Wall Mounted Ss Frame Of Superioe Make. (Jaquar) 41 P/F Pump Action Frosted Glass Soap Dispensor With Wall Mounted Ss Frame Of Superior Make. (Jaquar) 42 P/F Ss Towel Ring With Wall Flange Of Superior Make, (Jaqar) 43 P/F Ss 304 Gratings For Floor Drainage With Cockroach Trap. (5\X5\) 44 P/F Vanity With Counter Top Basin With Waste Coupling And Waste Pipe,Cp Mixer Of Standard Make(Jaquar Or Equivalent, Basin Mounted) Including Drawers For Storage, Backlit Looking Glass Of Size 2X1.5. Complete Job. 45 Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion. (I) Single Socketed Pipes 75 Mm. 46 Engaging Welder With Welding Set And Consumables. 47 Providing And Fixing Chromium Plated Brass Handles With Necessary Screws Etc. Complete : 100 Mm. 48 Providing And Fixing Pvc Moulding Of Different Sizes 12Mm To 65Mm Width (8 Feet Length) Fixed With Adhesive Of Approved Quality And Screws/Nails On Walls As Per Directions Of The Engineer-In-Charge .65Mm. 49 Providing And Fixing Pvc Moulding Of Different Sizes 12Mm To 65Mm Width (8 Feet Length) Fixed With Adhesive Of Approved Quality And Screws/Nails On Walls As Per Directions Of The Engineer-In-Charge.40Mm. 50 Providing And Fixing Nickel Plated M.S. Pipe Curtain Rods With Nickel Plated Brackets 20 Mm Dia ( Heavy Type). 51 Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Necessary Screws Etc. Complete. : 52 Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, Laid On 20 Mm Thick Cement Mortar 1:4 (1Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 53 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Upto 15°, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Upto Five Level Including Curing But Excluding The Cost Of Centring, Shuttering, Finishing And Reinforcement With 1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size). 54 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 55 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platforms. 56 P/F Pvc Panelling/Wallpapers Of Premium Make On Walls And Ceilings As Per Directions Of Engineer I/C. 57 Providing, Fixing And Applying Plaster Of Paris (Pop) False Ceiling Consisting Of Frame Work Made With 50Mm Sq M.S. Tubes Of 18 G Thickness As Main Runner At 600 Mm C/C Both Ways, Suspended/ Supported With M.S. Flats 25X4 Mm From Existing R.C.C. Slab, Finished Smooth To Line And Level Including Necessary Supports, Scaffolding Etc. As Required And Also Including Applying A Coat Of Red Oxide Zinc Chromate Primer Over The M.S. Frame Work And Suspenders Complete. Including Providing And Fixing Expanded Metal Of Size 5.25 Mm X 1.25 Mm Thickness Welded To Main Runners And Applying Pop (Calcium Sulphate Semi Hydrate Variety) To The Expanded Metal Of Thickness Not Less Than 10 Mm. 58 Brick Work With Common Burnt Clay (Non-Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In : Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand). 59 Extra For Brick Work With Common Burnt Clay Bricks/Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level. Rsq 15 60 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). 61 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Welded. 62 Providing And Fixing Precoated Galvanized Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Jammu And Kashmir View Result →
Uttar Pradesh View Result →
37.
Defence #10959397 AOC
Bids Are Invited For Hydraulic Automatic Door Closure Upto 60 Kg , Mixer Wall With Telephone Crutch Shower , Mixer Wall With Non Telephone Shower , Flushing Cistern Low Level Pvc 9 Or 10 Ltr With Complete Fitting , Stop Cock Cp 15 Mm With Female Thread , Sink Kitchen Ss With Draining Board 41 Inch X 20 Inch , Plate Rack Kitchen Ss - Plate Rack Kitchen Ss (36 Inch X30 Inch X10 Inch) , Sink Kitchen Ss Without Draining Bd 60Hl Size 610 Mmx 460 Mm 24 Inch X 18 Inch And Bowl Size 550 Mm X 405 Mm - Sink Kitchen Ss W/O Draining Bd 60Hl Size 610 Mmx 460 Mm (24Inchx18inch) And Bowl Size 550 Mm X 405 Mm , Grating Pvc Dome Type 125 Mm Cat No 112 , Wire Cloth 0.45 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40 Mm Alluminium Alloy , Pvc Float Valve 25 Mm , Commode Seat Cover For Ewc With Hinges Colour White , Stop Cock Concealed Cp 15 Or 20 Mm , Health Faucet Set With Hook 15 Mm For Ewc , Mixer Basin Central Hole Without Pop Up Waste System , Angle Cock Cp 15 Mm With Flange 2 Way , Bib Cock Cp Long Body 15 Mm , Soap Dish Holder Ss , Shower Rose Ss 95Mmx65mmx15 Mm Dia , Butt Hinges Ms Medium Weight Cold Rolled 150 Mm 6 Inch Long Isi Marked , 3 In 1 Wall Mixture Woth Provn Of Hand Shower , Stop Cock Cp 15 Mm With Male Thread , Towel Rail Cp Brass 20Mm Dia X 2 Feet Or 3 Feet Long , Pillar Cock Cp Brass 15 Mm , Bib Cock Cp With Flange 15 Mm , Tower Bolt 200 Mm 8 Inch X 10 Mm Dia Aluminium Anodised , Butt Hinges Aluminium Alloy 100 Mm 4 Inch Long Marked Isi , Complete Internal Fitting For Single Flush Cistern 10 Ltr Capacity , Bib Cock Brass With Flange 15 Mm , Coat Hook Cp Double Code Aqn 7 , Coat Hook Aluminium Triple , Hasp And Stapple 100 Mm 4Inch Aluminium Anodised , Stop Cock Concealed Cp 15 Or 20 Mm , Tape Tephlon For Plumbing Work Roll Of 15 Mtr , Butt Hinges Aluminium Alloy 125 Mm 5 Inch Long Marked Isi , Sheet Aluminium 26 Guage X 3 Feet Wide In 20 To 30 Kg Roll , Bracket Holder Aluminium Anodised For Curtain Rod 20 Mm Tubing Inchtinch And Inchlinch Type Isi Marked Or Bis Equvt , Fevicol Type Synthetic Resisn Adhesive Sh , Connecting Pipe Flexible Pvc - Connecting Pipe Flexible Pvc 1/2Inch Dia Length 24 Inch 15 X 600 Mm , Pvc Waste Pipe 1 1.2 Inch Dia 3 Feet Long For Sink , Connecting Pipe Flexible Pvc 1.2 Inch Dia Length 18 Inch 15 X 450 Mm , Waste Pipe Pvc For Urinal 1 1.2 Inch Dia 3 Feet Long Code 345 , Bracket Holder Cp Steel For Curtain Rod 20 Mm Tubing Fancy Type Isi Marked Or Bis Equvt , Waste Coupling Cp 40 Mm Full Or Half Thread For Sink , Cpvc Pipe 20 Mm , Cpvc Pipe 25 Mm , Hasp And Staple 75 Mm Aluminium Anodised , Bow Or Door Handle D Type 75 Mm 3 Inch Aluminium Anodised - Bow / Door Handle D Type 75 Mm 3 Inch Aluminium Anodised , Butt Hinges Ms Medium Weight Cold Rolled 75 Mm 3Inch Long Isi Marked , Pipe Cp Steel Fancy For Curtain Or Hanger Rod 20 Mm X 18 G Anodised 12 Ft Equal To 01 No , Pvc Waste Pipe 1 1.4 Inch Dia 3 Feet Long For Whb , Sliding Door Bolt 250X16 Mm Dia Aluminium Anodised , Tower Bolt 150 Mm 6 Inch X 10 Mm Dia Aluminium Anodised , Sink Cock With Casted Spout With Aerator Table Mounted , Socket Union Gi 1.2 Inch 15 Mm , Waste Coupling Pvc 1 1.4 Inch 32 Mm For Urinal Code 104 , Hasp And Stapple 75 Mm 3Inch Brass , Cpvc Pipe 25 Mm Gate Valve , Bow Or Door Handle D Type 100 Mm 4 Inch Aluminium Anodised , Glass Shelf 500 Mm Long Aqn 7771 , Grating Cp Or Ss Dome Type 125 Mm With Waste Hole Cat No 113 , Shower Rose Pvc 65 Mm , Waste Coupling 40 Mm With Steel Basket Choke Proof For Sink Code Bsw 231 To 232 , Waste Coupling Pvc 1 1.4Inch 32 Mm For Whb Code 103 , Bow Or Door Handle D Type 125 Mm 5 Inch Ss , Tupentine Oil , Fevicol Type Heatproof Adhesive Heatx Laminate Binder , Bottle Trap Cp 32 Mm Dia With Size 190 Mm X 125 Mm Long Pipe , Cpvc Pipe 25 Mm Tank Nipple , Bow Or Door Handle D Type 125 Mm 5 Inch Aluminium Anodised - Bow / Door Handle D Type 125 Mm 5 Inch Aluminium Anodised , Fevicol Type Synthetic Adhesive Binder Ddl , Butt Hinges Ms Medium Weight Cold Rolled 125 Mm 5 Inch Long - Butt Hinges Ms Medium Weight Cold Rolled 125 Mm 5 Inch , Waste Coupling Cp 32 Mm Full Or Half Thread For Sink , Hasp And Stapple 65 Mm 2.5Inch Brass , M-Seal Epoxy Compound In Packet , Hasp And Staple 50 Mm 2 Inch Brass , Putty Oil In Bucket , Screw Wood Ms Shaved Head 1 Inch 25 Mm Length X 6 G , Plug Gi 3 Or 4 Inch , Cpvc Pipe 20 Mm Brass Socket M , Cpvc Pipe 20 Mm Brass Elbow , Cpvc Pipe 20 Mm Brass Tee , Door Floor Stopper Aluminium 50 To 70 Mm Long With Rubber Buffer Isi Marked , Grating Cp Flat Round Type 100 Or 102 Mm Cat No Ft62 , Screw Wood Ms Shaved Head 1.5 Inch 38 Mm Length X 6 G , Screw Wood Ms Shaved Head 1.2 Inch 12 Mm Length X 6 G , Screw Wood Ms Shaved Head 3.4 Inch 20 Mm Length X 6 G , Sink Cock With Casted Spout With Aerator Wall Mounted , Thinner , Nail Wire 1 1.2Inch , White Cement , Socket Gi 20 Mm 3.4 Inch , Panel Pin 20 Mm , Nail Wire 1.2 Inch , Two Way Bib Taps Cast Copper Alloy 15 Mm Dia Chromium Plated Fancy Type Screwed Down For Iron Pipe And , Panel Pin 15 Mm , Cpvc Pipe 25 Mm Socket , Cpvc Pipe 25 Mm Elbow 90 Degree , Socket Union Cpvc 20 Mm , Cpvc Pipe 20 Mm Socket , Cpvc Pipe 20 Mm Elbow 90 Degree , Pvc Washer For 15 Mm Dia Tap Packet Of 100 Nos , Nail Wire 1 Inch , Nail Wire 3 Or 4 Inch , Nipple Barrer Gi - Nipple Barrer Gi 1/2 Inch Dia 4 Inch Long , Glass Frosted Sheet 120 Cm X 60 Cm X 4 Mm Thick , Elbow Gi 15 Mm - Elbow Gi 15 Mm 1/2 Inch , Ply Wood 12 Mm Grade Bwr Type A Or Aa As Per Is 303 Size 6.5 Feet X 3 Feet , Mdf Board 18 Mm Grade I Exterior As Per Is 12406 Size 8 Feet X 4 Feet , Lock 6 Lever Universal 75 Mm Wide , Laminated Decorative Sheet 1 Or 1.5 Mm Thick As Per Is 2046 Size 8 Feet X 4 Feet , Prelaminated Particle Bd 12 Mm Grade I Exterior As Per 12823 Size 8 Feet X 4 Feet , Slip On Soft Closing Hinges For Cabinet Doors , Anti Termite Terminator Liquid Or Spray , Knobs Cp Steel 25 Mm Dia , Tw Beading Flat Or Half Round 18 Mm Wide X 6 Mm Thick Best Quality Unpolished , Ms Screw Shaved Head 4 Inch 100 Mm Length X 6 Or 8 G , Channel Ball Bearing For Computer Table Keyboard Tray 300 Mm , Channel Soft Close For Drawer Or Tray 350 Mm Model 7084 , Synthetic Enamel Paint Olive Green Colour , Emery Paper 80 No Sheet Best Quality , Paper Tape Self Adhesive Roll Of 100 Mtr For Carpentry Purpose Best Quality , Synthetic Enamel Red Oxide Paint , Brush Paint 2 Inch Wide , Tupentine Oil , Pvc Buffer Or Shoe 25 Mm Dia Superior Quality Packet Of 50 No , Cloth Malmal For Polishing Or Inner Cover Best Quality , Brush Paint 1 Inch Wide , Lipping Tw Teak Face 6 Mm Wide Roll Of 100 Mtr , Magnetic Catcher For Cabinet Doors , Wall Plug 4 Inch Pvc Grip Holder 4 Inch , Synthetic Enamel Paint Black Colour , Brush Paint 3 Inch Wide , Tw Beading Flat Or Half Round 12 Mm Wide X 6 Mm Thick Best Quality Unpolished , Hinges Paino Ss 20 Mm Wide Best Quality , Pvc Buffer Or Shoe 20 Mm Dia Superior Quality Packet Of 50 No , Knobs Cp Steel 40 Mm Dia Make Ajanta Bharat Crown Classic Jyothi Or Equivalent , Nail Wire 1 1.5 Inch , Nail Wire 3 Or 4 Inch , Nail Wire 1 Inch , Nail Wire 1.5 Inch Total Quantity : 2565
Contract Date: Ref. Documents Contract Value : ₹ 10.92 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Andaman And Nicobar Islands View Result →
38.
Educational and Research Institute #10931340 Price Bid
Tender for Notice Inviting Tender For Manufacturing, Supply And Installation Of Bms Hostel Furniture At Iim Sirmaur , Item Rate Boq Boq_Ver3.0 Item Rate Normal Inr Only Inr Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Senior Consultant (Administration), Iim Sirmaur, Dhaula Kuan, H.P. 173031 Name Of Work: Notice Inviting Tender For Manufacturing, Supply And Installation Of Bms Hostel Furniture At Iim Sirmaur Contract No: Iims/Pur/Bms Hostel Furniture/ 01/2026-27 Dated 08.04.2026 Name Of The Bidder/ Bidding Firm / Company : Financial Bid Boq (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevent Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. Description Of Items Item Code / Make Quantity Units Estimated Rate In Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Price Inclsuive Of Gst & All Other Charges In Figures To Be Entered By The Bidder In Rs. P Excise Duty Vat Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount (Incl. Gst & All Other Charges) In Rs. P Total Amount With Taxes Total Amount In Words , Chairs Providing And Placing In Position Of Medium Back Workstation Chairs Per Approved Sample And Below Specification. Size: - H- 895-970Mm X W-620-630Mm X D- 470Mm Back In Mesh With Curved Design And Seat Are Made Up Of 12Mm Hot Pressed Plywood Upholstered In Fabric And Moulded In Foam. The High Resilience Polyurethane Foam Is Moulded With Density=45+/-2 Kg/M3 And Hardness Load 16+/-2 Kgf As Per Is: 7888 For 25% Compression. The Seat And Back Are Arrested Together With A 9.0Cm (W) Spine Made Of 0.8Cm Thick Hr Steel. The Back Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Chair Shall Have An Centre Tilt Mechanism And Tilt Tension Adjustment, Single Locking Facility And Full 360 Degrees Swivel Mechanism, The One Piece Arm Rest Should Be Made Up Of Black Integral Skin Polypropylene With 50-70 Shore A Hardness Reinforced With Ms Insert, The Armrests To Be Scratch And Whether Resistant. The Arm Rests Are Fitted To The Seat With A Connecting Strip Assembly Made Of 5Mm Of Hr Steel. The Prong (Base) Is Made Of Nylon And Fitted With 5Nos. Twin Wheel Castors (Castor Wheel Dia. 50Mm). The Prong (Base) Is 660Mm Pitch Centre Dia. (700Mm With Castors). The Telescopic Bellows Is 3 Piece Telescopic Type And Injection Moulded In Black Polyurethane. The Pneumatic Height Adjustment Shall Have Adjustment Stroke Of 120Mm And Shall Be Operated At 30Kgs Extension Force. The Material Should Be Procured From Fsc Certified Supplier / Oem, Bifma Certified And Complete As Per The Direction Of Engineer-In-Charge. , Single Bed With Mattress Providing And Placing In Position Of Single Bed With Overall Size 36W X 86L X 38H And With Mattress Of Minimum Three Layer Of Approved Specification By Engineer-In-Charge Of Suitable Size For Fitment Into The Bed. The Box All Four Sides And Top Made Of 19Mm Isi Marked Compressed Ply Board Faced With 0.8Mm Thick Laminate On Both Sides Of Approved Shade With Minimum 2 Mm Pvc Beading On The Edges. The Height Of Box Will Be 15. The Box Having Centre Wooden Support At Minimum Gap Of 300 Mm Covered With 12 Mm Isi Marked Compressed Ply With .8Mm Thick Laminate On One Side. The Bed Having Designer 4 Sloped Head Side Made In Combination Of 8 And 18 Mm Laminated Board With Slope And Supported With 25Mm Thick Vertical Supports At The Back. The Foot Side Made Of Laminated Board With 32Mm Thickness. All The Edges Provided With Machine Pressed 2.0 Mm Thick Pvc Edge Bands Glued With Hot Melt Eva Glue. , Study Table With Drawer: Providing And Placing In Position Of Factory Made Study Table Of Size 1200Mm L X 600Mm D X 750Mm H. Table Top Shall Be Made Out Of 25Mm Thick Commercial Ply Of Bwp Grade Confirming To Is 710:2010. The Side Panel / Vertical Support And Modesty Shall Be Made Out Of 19Mm Thick Commercial Ply Of Bwp Grade Confirming To Is 710:2010 Shall Be Supporting Below The Working Table Top And Modesty Having Height Of 650 Mm To 700 Mm Shall Be Fixed At Front Side Of Table Top. Table Top Surface, Both Sides Of Vertical Support/ Side Panel And Both Sides Of Modesty Shall Be Pasted With 1.00 Mm Thick Decorative / Coloured High Pressure Laminated Sheet With Hot Pressed Glue/ Adhesive Of Approved Quality. Balancing Laminate Pasted Below The Table Top Shall Be Thickness Of 0.60 Mm In Gloss / Matt Finish With High Density Protective Surface Layer Pasted With Hot Pressed Eva Glue Including Cost Of Glue/ Adhesive Of Approved Quality. The Working Or Non-Working Edges Shall Be Provided With Matching Machine Pressed 2Mm Thick Pvc Edging Using With Special Hot Melt Eva Glue At Hot Temperature. All Necessary Ss Hardware/ Fitting/ Hinges/ Locks/ Handles Etc. Shall Be As Isi Standards. The Material Should Be Procured From Fsc Certified Supplier / Oem And Complete As Per The Direction Of Engineer-In-Charge. , Dining Table (6 Seater): Providing And Placing In Position Of Dinning Table Of Required Size: L-1800Mm X W-900Mm X H-750Mm - Table Top Shall Be Made Of 25 Mm Thick Hdhmr Board Having One Side Factory Laminated And Table Top Side Pasted With Glossy Flexi Laminate Minimum Thickness Of 0.6 Mm Of Approved Shade With Post Forming Curve Across The Length Of The Table With Approved Adhesive. The Under Structure Is Formed By Ss 304 Square Tube Frame Of Size Of 40Mm X 40Mm X 1.6Mm Thick . The Base Of The Ss Tube Legs Are Fitted With Plastic Cap On Each Leg. Ss Legs Should Be Connected With Ss 304 Square Tube Frame Of Size 25X25x1.6 Mm Thick Across The Length And Width Sides. The Material Shall Be Procure From Fsc Certified Supplier / Oem And Complete As Per The Direction Of Engineer-In-Charge. , Dining Chair: Providing And Placing Factory Made Injection Moulded Indoor Grade Polypropylene Compound Dining Chair Of Size: (L) 430Mm X (D)460Mm X (H)800Mm. Legs With 25 Mm Thick Ss 304 Grade Fitting With Pvc Shoe. The Material Procure From Fsc Certified Supplier / Oem And Complete As Per The Direction Of Engineer-In-Charge. Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 21
Himachal Pradesh View Result →
39.
Defence #10908707 AOC
Tender For Addition/Alteration To Certain Married Accn At Air Force Station Pathankot Under Ge (Af) Pathankot.; 1 Schedule A Part-I (Building Works) 2 M&L for preparation of surface byscrapping and properly cleaning the surface to remove loose particles/existing vegetation/roots etc. with wire brushes and removing any type of existing roof treatment in any layer alongwith existing plaster so as to reach up to top of RCC roof slabcomplete in all respect , filling of cracks with Smart Care Hybried PU sealent wherever required for rendering or plastering work 10 mm thick in CM 1:3 on roof surfaces and finishing the surface without using extra cement for application of roof treatment(A) Apply first coat of fibre reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres with sun reflectivity index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 MPa and shall have crack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure , reduce surface temperature upto 10 degree celsius with 33% dilution as primming coat. (b) Laying of fibre mesh of 0.3mm thickness weave in leno pattern having weight 45 gm/Sqm and pasting it properly with overlap of 50mm and allow it to dry. (c) Apply second undiluted coat @ 0.450 ltr/Sqm(d) Apply third and final coat undiluted @ 0.450Ltr/Sqm in color combination/ cameoflauging patternas directed by Engr-in-charge. Note : Application of water proofing treatment will be done Authorised applicator only/ or in presence of authorised rep. Certificate in this regard shall be submitted to Engr-in-charge. Shifting/removal of any wire/ cable/AC unit/water tank or any other object as per the site requirement and refixing of the same if needed is deemed to be included in rates quoted by contractor. 3 S&F in repair 150mm dia PVC (SWR) pipes single socketed in any lengthfixed to wall including clamps, bends, sockets, as required complete all as specified and directed by Engr-in-Charge. 4 S&F for rotational triple layer moulded polyethene water storage tanks of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nutetc complete including dismantling existing RCC/Iron/PVC water tank all as specified and directed. 5 S&F for rotational triple layer moulded polyethiene water storage tanks of capacity 1000 litres, (cylindrical vertical with closed top) hoisted and fixed in position including necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nutetc complete including dismantling existing RCC/Iron/PVC water tank all as specified and directed by Engr-in-Charge. 6 S&F for 20mm bore Steel water tubing medium grade, galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed by Engr-in-Charge. 7 Demolition of brick work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast RCC articles and disposal of debris out of MoD land complete all as specified and directed by Engr-in-Charge. 8 M&L brick work with sub class B burnt bricks straight or curved on plan 6m mean radius built in cm 1:6complete all as specified and directed by Engr-in-Charge. 9 Material and labour for high depth cladding coloured glazed ceramic tiles rustic-matt type in vertical surface such as gate piller, dado, etc 450mmX 300mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete aall as specified and directed by Engr-in-Charge.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by Engr-In-Charge and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. 10 Demolition of Roofs, floors (other than ground floors), beams,staircases,landings, chajjas,RCC Water tank similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed by Engr-in-Charge.Note:- Demolition will be done only by mechanical cutter only . 11 M&L for RCC Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs Design MixM-25 (20 mm graded aggregate) set in CM 1:6, as in slabs for Water tank base size as required etc with plain fair faces incl necessary formwork complete all as specified and directed by Engr-in-Charge. 12 M
Contract Date: Jan 15, 2026 Contract Value : ₹ 1.14 Crore
Statutory Bodies & Commissions/Committees No of Bidders 6
Punjab View Result →
Andaman And Nicobar Islands View Result →
41.
Defence #10842160 AOC
Bids Are invited for Title1 - Supply And Installation Of Wooden Wall Paneling Using 18Mm Waterproof And Termite Proof Plywood Including All Necessary Hardware Total Area Approx 200 Sqft , Title2 - Supply And Installation Of Wooden Door 8Ft X 4Ft Door Shutter With Bothside Paneling Using 3Mm Decorative Laminate Or Veneer Including Edge Banding And Finishing , Title3 - Supply And Installation Of 98 Inches Edla Certified Ai Whiteboard Enabled Automatic Data Processing Unit , Title4 - Supply And Installation Of Elite 4K Premium 20X Camera , Title5 - Supply And Installation Of Audio Dsp And Ceiling Microphones 12 Channel Ppu Mcc Dsp Pro 12C Featuring , Title6 - Supply And Installation Of Multi Channel Audio Dsp , Title7 - Supply And Installation Of 22 Inch Interactive Touch Monitor , Title8 - Supply And Installation Of Wall Mount Speakers , Title9 - Supply And Installation Of Ops Computer Module Intel Core I7 12Th Gen 8Gb Ram 256Gb Rom , Title10 - Transport And Labour Charges Total Quantity : 12
Contract Date: Ref. Documents Contract Value : ₹ 23.65 Lakh
Government Departments No of Bidders 4
Andhra Pradesh View Result →
42.
Housing Urban and Rular Development #10796259 AOC
Supply, Installation And Maintenance Of Mechanical Compactors, Storage Systems, Furniture Articles, Solid Teak Wood Benches For Public Seating In New Judicial Complex Tower Of Justice At Gurugram-Overall Size Of Personal Locker Unit Shall Be Of Dimensions 900Mm(W) X 400Mm(D) X 1850Mm(H) Having 15 Locker Unit. Locking Shall Have Pad Lock . Material Shall Be Crca 0.8 Mm Thickness. Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum. Finish Shall Be Powder Coating Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. Handle/Label Holder Shall Be Aesthetically Appealing Snap Fit Abs Plastic Handle. Ventilation Shall Be Attractive Punched Pattern For Ventilation. , Providing And Placing Workstation Table In Completely Knock Down Conditions With An Overall Size 1320Mm X 660Mm X 1200Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1200Mm X 600Mm Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 525Mm X 350Mm. The Trey Shall Be Operated On Keyboard Channel. The Workstation Shall Have Panel Based Partition Of 60 Mm Thick With Overall Height 1200Mm. The Partition Shall Be Linear In Profile And Provided In The Front Side Of User As Well As On The Both Sides Of The User. The Top Trim, Top Bar, Mid Bar, Vertical Bar, Raceway, Skirting Shall Be Made Up Of Aluminium Extrusions (Pre-Treated) And Duly Powder Coated With Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. The Trims Shall Have The Size 60Mm X 19Mm With 1.5Mm Thick Covered With Die Cast End Caps On Joints 2 Ways, 3 Ways And 4 Ways (L-Cover For Corner, T-Cover For Middle Section Wherever Required). The Aluminium Raceway Shall Be Situated Below The Worktop With An Overall Size 116Mm(H) X 60Mm(D) With 1.4 Mm Cover Thickness And 2Mm Back Thickness As Per Requirement Of Inlaying The Electrical Management And Carrying The Wire Horizontally. The Exposed Vertical And Horizontal Faces Of The Frames Shall Be Snap Fitted With Trims. There Shall Be Soft-Board (With Fabric) And Marker Board Provided At Front Of The User. Laminated Top Tile And Bottom Tile Shall Be Situated At Both Sides Of The User And Below The Work Top Respectively. The Partition Shall Have Concealed Wire Management Capabilities And Should Be Engaged For Responsive And Safe Operations Of Power, Telecommunications And Data (Lan) And Has Separate Components For Electrical, Data And Telephone Cables Having Adequate Capability Of Both The Vertical And Horizontal Wire Movements. Slots/Cut-Outs Should Be Given On Raceways To Fix All Electrical And Data Points. Zinc Coated Small Top Support Brackets Shall Be Fixed On The Partition For Table Top Support. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Situated At Bottom. Adjustable Leveller Shoe Shall Be Provided At Bottom Of The Partition To Avoid Scratches On The Floor. Fixed Type Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 725Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close And Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Lock With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Nylon Castor Based Cpu Unit Shall Be Provided With An Overall Size 468Mm X 284Mm With 18Mm Thick Pre-Laminated Particle Board. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (5 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (4 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (1 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (5 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915Mm X 910Mm X 2190Mm (2 Nos) 1 Bay Single Last Movable (Lockable) 915Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915 Mm X 910Mm X 2190Mm (1 Nos) 1 Bay Single Last Movable (Lockable) 915 Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (2 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 1830Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 1830Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 1830Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 2400Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 2400Mm X 910Mm X 2190Mm (4 Nos.) 2 Bay Single Last Movable (Lockable) 2400Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 1200 Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 1200Mm X 910Mm X 2190Mm (3 Nos) 1 Bay Single Last Movable (Lockable) 1200Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 2 Bay Single Static Fixed 1830Mm X 455Mm X 2190Mm (1 No.) 2 Bay Double Movable 1830Mm X 910Mm X 2190Mm (3 Nos.) 2 Bay Single Last Movable (Lockable) 1830Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 4 Bay Single Static Fixed 4800Mm X 455Mm X 2190Mm (1 No.) 4 Bay Double Movable 4800Mm X 910Mm X 2190Mm (4 No.) 4 Bay Single Last Movable (Lockable) 4800Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 4 Bay Single Static Fixed 4800Mm X 455Mm X 2190Mm (1 No.) 4 Bay Double Movable 4800Mm X 910Mm X 2190Mm (5 No.) 4 Bay Single Last Movable (Lockable) 4800Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm (2080 Body Plus 65 Undercarriage). The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated.Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 1 Bay Single Static Fixed 915Mm X 455 Mm X 2190 Mm (1 No.) 1 Bay Double Movable 915Mm X 910Mm X 2190Mm (3 Nos) 1 Bay Single Last Movable (Lockable) 915Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 3600Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 3600Mm X 910Mm X 2190Mm (4 Nos.) 3 Bay Single Last Movable (Lockable) 3600Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 2745Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 2745Mm X 910Mm X 2190Mm (2 Nos.) 3 Bay Single Last Movable (Lockable) 2745Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 2745Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 2745Mm X 910Mm X 2190Mm (3 Nos.) 3 Bay Single Last Movable (Lockable) 2745Mm X 455Mm X 2190Mm (1 No.) , Providing And Placing Mechanically Assisted Drive Mechanism Mobile Compactor. The Structure Shall Be Made Out Of 0.8 Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Each Unit Have 5 Loading Levels Formed By 4 Nos. Of Adjustable Shelves. Body Units Are Bolted To Undercarriage. Compactor Height From Ground Should Be 2190 Mm . The Body Including Shelves Shall Be Given Antirust Surface Treatment And Powder Coated With Epoxy Polyester Powder Coating I.E. Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. It Shall Have Max. Load Bearing Capacity Of 60 Kg Uniformly Distributed Per Shelf. Shelves Shall Be Mounted On Support Brackets And Shelf Level Can Be Adjusted. The Undercarriage Shall Be Welded Frame Made Of Hr Sheet Minimum 2.5 Mm Thick Suitably Fabricated To Take The Loads Based On Configuration. A Centralized Locking Arrangement Shall Be Provided Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. This Arrangement Occupies A Space Of 100 Mm. Each Drive Type Units Have Locking Knob Near The Drive Wheel For Manual Locking Of Individual Units When A Person Is Using Those Units. End Stoppers Are Provided At The End Of Channels To Prevent Derailment. The Nuts And Bolts Are Galvanized / Zn Plated. Movement Of Units Shall Be Achieved Mechanically Through A Drive Wheel And ‘Sprocket-Chain-Tensioner’ Arrangement Mounted Rigidly Onto Body Side. 3 Bay Single Static Fixed 3600Mm X 455Mm X 2190Mm (1 No.) 3 Bay Double Movable 3600Mm X 910Mm X 2190Mm (5 Nos.) 3 Bay Single Last Movable (Lockable) 3600Mm X 455Mm X 2190Mm (1 No.) , Providing And Supplying 2 Seater Visitor Chair With 3 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 3.82Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 1100 ±10 Mm. Total Weight = 36.8 Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01.). Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying 3 Seater Visitor Chair With 4 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 5.65Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 1625 ±10 Mm. Total Weight = 55Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01.). Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying 4 Seater Visitor Chair With 5 Arms. The Seat And Back Shall Be Made Up Of Reinforced Pu With Ms Perforated Sheet (Sheet Thickness - 2.5Mm).Seat Weight With Pu 6Kg±0.01 And Back Shall Be 6.11Kg±0.01. The Seat Mounted On Ms Powder Coated Square Cross Beam Having Cross-Section Area 60Mm X 60Mm With 2Mm Thick (Weight = 7.56Kg±0.01) Fitted With Polypropylene End Caps On Both Side. The Arm (Weight = 1.28±0.01) And Leg (Weight = 1.91±0.01) Shall Be Made Up Of Pressure Diecast Aluminium. There Shall Be Leveller Shoe Provided At The Bottom With Metal Insert. The Individual Seat Size Shall Be 515±10 Mm(W) X 505±10 Mm(D), Back Size Shall Be 515±10 Mm(W) X 510Mm±10 Mm(H) From Seat, Overall Depth Shall Be 660±10 Mm, Overall Height Shall Be 870±10 Mm And Overall Width Shall Be 2175 ±10 Mm. Total Weight = 73.2Kg±0.01. (Seat Weight Without Pu 4.6Kg±0.01 And Back Shall Be 5.0Kg±0.01. Colour Of Pu Shall Be Tan Brown And Powder Coating Shall Be Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 To Be Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 710±10 Mm(H) From Seat. Overall Height Shall Be = 1170±10 Mm And Overall Width/Depth = 740±10 Mm. , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminum With Cushion Arm Having Leatherite Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 540±10 Mm(W) X 750±10 Mm(H) From Seat. Overall Height Shall Be = 1210±10 Mm, Overall Depth = 630±10 Mm And Overall Width = 650±10 Mm. N , Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Pure Leather Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Aluminum With Cushion Arm Having Leatherite Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 540±10 Mm(W) X 750±10 Mm(H) From Seat. Overall Height Shall Be = 1210±10 Mm, Overall Depth = 630±10 Mm And Overall Width = 650±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Metal Insert Crca Covered With Natural Wood Having Pitch Circle Dia. 630 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011 And Should Be Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 560±10 Mm(H) From Seat. Overall Height Shall Be = 1010±10 Mm, Overall Depth = 680±10 Mm And Overall Width/Depth = 740±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood And The Back Shall Be Supplied With Metal Pipe, Inserted Between Backrest. The Chair Shall Be Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ In Seat And 12Mm Thick Having Density 23Kg/M³ In Back. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8±0.1 Mm Thick And 535 Gsm And Breathable Mesh Tapestry Behind The Backrest.. Ms Chrome Plated Pipe Frame Shall Be Provided On Both Side Of Seat And Back With Size 25Mm X 10Mm. The Backrest Shall Be Supplied By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. The Armrest Shall Be Used Black Integral Polyurethane Arm Mounted On Crca Chrome Plated Pipe Having Size 40Mm X 10Mm Completely Joint With Seat And Back With The Assistance Of Allen Key Screw. A Chrome Plated Round Bend Pipe Of Dia. 9Mm Shall Be Provided Behind The Backrest Of The Chair And Welded With Main Frame. For Seating Durability The Chair Shall Have Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 100Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Shall Have Five Legged Crca Chrome Plated Having Pitch Circle Dia. 640Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chairs Should Be Injection Moulded In Black 30% Glass Filled, Confirming To Ansi/Bifma Standards X5.1-2011 Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 490±10 Mm(W) X 520±10 Mm(D) And Back Size Shall Be 450±10 Mm(W) X 535±10 Mm(H) From Seat And Overall Height = 980±10 Mm, Overall Width/Depth = 740±10 Mm. , Providing And Supplying A Medium Back Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam (50 Plus 25)Mm Thick Having Density 40Kg/M³ And The Back Shall Be Made Of (15 Plus 6)Mm Thick Double Layered Moulded Plywood Padded With High Resilience Polyurethane Foam 40Mm Thick Having Density 32Kg/M³. The Seat And Back Shall Be Upholstered With Pure Leather Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine Which Helps To Provide Full Back Support. The Chair Shall Be Supplied With Chrome Plated With Cushion Arm Having Leatherite Covering Top Completely Joint With Seat. For Seating Durability The Chair Shall Have Synchro Knee Tilt 360 Degree Revolving Mechanism With Four Position Locking And Tilt Tension Adjustment Which Provides Back Strength For The Chair. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm With Bifma Standard Class-3 Gas-Lift To Suit Them Using The Lever Under The Seat. The Gas-Lift Mechanism Should Be Tested As Per Ansi/Bifma X5.1-2011 Standards. The Pedestal Should Have Five Legged Made Of Die Cast Aluminium Having Pitch Circle Dia. 700 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Confirming To Ansi/Bifma Standards X5.1-2011Tested To Perform 98,000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm(D) X 530±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 580±10 Mm(H) From Seat. Overall Height Shall Be = 1040±10 Mm, Overall Depth = 620±10 Mm And Overall Width = 620±10 Mm. , Providing And Supplying A Visitor Chair With Ergonomic Design For User Comfort And Shall Have Aesthetically Appealing. The Seat Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood And The Back Shall Be Supplied With Metal Pipe, Inserted Between Backrest. The Chair Shall Be Padded With High Resilience Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ In Seat And 12Mm Thick Having Density 23Kg/M³ In Back. The Seat And Back Shall Be Upholstered With Leatherite Tapestry 0.8±0.1Mm Thick, 535 Gsm And Breathable Mesh Tapestry Behind The Backrest. Ms Chrome Plated Pipe Frame Shall Be Provided On Both Side Of Seat And Back With Size 25Mm X 10Mm. The Backrest Shall Be Supplied By Keeping The Natural Curvature Of The Spine Which Helps To Provide Back Support. The Armrest Shall Be Used Black Integral Polyurethane Arm Mounted On Crca Chrome Plated Pipe Having Size 40Mm X 10Mm Completely Joint With Seat And Back With The Assistance Of Allen Key Screw. Chrome Plated Round Bend Pipe Of Dia. 9Mm Shall Be Provided Behind The Backrest Of The Chair And Welded With Main Frame. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Chrome Plated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10 Mm(W) X 510±10 Mm(D) And Back Size Shall Be 450±10 Mm(W) X 540±10 Mm(H) From Seat And Overall Height = 980±10 Mm, Overall Width = 560±10 Mm. N , Providing And Supplying A Visitor Chair With Ergonomic Design, Comfortable And Aesthetically Appealing. The Seat And Back Frame Shall Be Made Up Of The Combination Of 15Mm Thick Hot Pressed Commercial Plywood And Ply-Board Padded With High Resilience Polyurethane Foam (50 Plus 25 Plus 30)Mm Thick Having Density (40, 32 And 32)Kg/M³ In Seat And (30 Plus 25)Mm Thick Having Density (32, 32)Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick And 535 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support. Seat And Back Shall Be Covered With Polished Wooden At Both Side For Decorative Appearance. The Chair Shall Be Supplied With Natural Wood Arm Having Melamine Polish And Die Cast Aluminium End Caps. The Frame Structure Shall Be Cantilever Support Type Made Of Ms Crca Chrome Plated Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 510±10 Mm(W) And Back Size Shall Be 525±10 Mm(W) X 560±10 Mm(H) From Seat. Overall Height Shall Be = 1010±10 Mm, , Providing And Supplying Centre Table With An Overall Size 1200Mm X 1200Mm X 410Mm. The Top Should Be Made Up Of 75Mm Thick, It Would Be 25Mm At Mid And 75Mm At Sides. The Mdf Top Should Have Decorative Finish With Veneer And Pu Polish And Shade As Per Directions Of Engineer-In-Charge. The Understructure Shall Consist Of 4 Nos. Of Ms Sheet Gold Leg With 6Mm Thick. , Providing And Supplying Centre Table With An Overall Size 600Mm X 600Mm X 410Mm. The Top Should Be Made Up Of 75Mm Thick, It Would Be 25Mm At Mid And 75Mm At Sides. The Mdf Top Should Have Decorative Finish With Veneer And Pu Polish And Shade As Per Directions Of Engineer-In-Charge. . The Understructure Shall Consist Of 4 Nos. Of Ms Sheet Gold Leg With 6Mm Thick. , Providing And Supplying Kids Chair. The Complete Structure Shall Be Made Up Of One Piece Injection Moulded Polypropylene Shell. The Understructure Shall Consist Of Four Legs.There Is A Square Hole On The Backrest Of Size L 140 Mm X H 50 Mm For Air Flow.The Chair Is A Single Piece Unit Made From Virgin Grade Material. The Seat Size Shall Be 280±10 Mm(W) X 300±10 Mm(D) And Back Size Shall Be 310±10 Mm(W) X 330±10 Mm(H) From Seat And Overall Height = 610±10 Mm, Overall Depth = 420±10 Mm, Overall Width = 370±10 Mm.Seat Height = 330±10 Mm The Leg Dimension Is 47 Mm X 37 Mm, L Shaped. , Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. The Same Shall Be Upholstered With Leatherite Tapestry 0.8Mm Thick. The Backrest Of The Chair Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support With The Assistance Of Cushion. The Armrest Shall Be Of Chrome Plated Frame Padded With Cushion With Leatherite Covering On Top. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Chrome Plated Pipe Having Cross Section 40Mm X 20Mm. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Seat Size Shall Be 500±10 Mm(W) X 500±10 Mm(D) And Back Size Shall Be 490±10 Mm(W) X 550±10 Mm(H) From Seat And Overall Height = 960±10 Mm, Overall Width = 600±10 Mm And Overall Depth = 670±10 Mm. N , Providing, Placing And Installing A Slotted Angle Rack With An Overall Size 900Mm (W) X 600Mm (D) X 1800Mm (H). The Panel Shall Have 5 Nos. Of Shelves Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Crca Slotted Angle Shall Be Supplied With 2Mm Thick Having Size 40Mm X 40Mm. All Steel Components Shall Be Have Finishing With Powder Coating Of Interpon 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. Corner Plate (Gussets) And Fasteners Shall Be Provided For Complete Assembly. , Providing, Supplying And Placing In Position An Indoor Chair Complete In All Respects Manufactured Using 20% Glass-Filled Injection Moulded Polypropylene, Ensuring High Strength, Durability, And Resistance To Wear And Tear. The Chair Shall Be Of Single-Piece Moulded Construction With A Smooth Finish And Free From Any Sharp Edges Or Defects. The Frame Structure Shall Be Supported By Four Sturdy Polypropylene Legs Of Tapered Design, Having A Diameter Of 35 Mm At The Upper End And 25 Mm At The Lower End, Providing Adequate Stability And Load-Bearing Capacity. The Seat Size Shall Be 420 ± 10 Mm (Depth) × 460 ± 10 Mm (Width), And The Back Size Shall Be 395 ± 10 Mm (Width) × 360 ± 10 Mm (Height From Seat Level), Ergonomically Designed For Comfortable Seating Posture. The Overall Height Of The Chair Shall Be 790 ± 10 Mm And Overall Depth Shall Be 515 ± 10 Mm. The Chair Shall Have A Uniform Finish, Be Uv Stabilized, And Suitable For Long-Term Use. Colour Shall Be As Approved By The Department/Engineer-In-Charge. The Rate Shall Include Supplying, Transporting, And Placing The Chair At Site In Complete Condition. Sample Shall Be Submitted For Prior Approval Before Bulk Supply. , Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. All Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf And Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Powder Coating Of Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Supplying And Placing A Modular Table With An Overall Size 1350Mm X 900Mm X 750Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms Crca Powder Coated Rectangle Pipe Frame Having Cross-Section Area 50Mm X 25Mm With 1.2Mm Thick. The Table Understructure Shall Be Supplied With Ms Powder Coated Round Leg Pipe 63 X 1.2Mm. The Gable End Shall Be Given At One Side Made Up Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade `D` Confirming To Is:513. Fixed Pedestal Unit Shall Be Supplied With 1 Nos. Of Drawer Plus 1 Filing At One Side. Facia Of Drawer And Filling In 18Mm Plpb Board The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Aluminium Recessed Handle. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. Finishing With Powder Coating Of Interpol 700 Ral 9002 Ec150N Semi Glossy Of Thickness 60Μ-80Μ. , Supplying And Placing Cafeteria Table With An Overall Size 1400Mm X 900Mm X 720Mm. The Top Of The Table Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminated. The Top Profile Shall Be In Rectangle Shape With Round Corner And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Size 40Mm X 20Mm With 1.6Mm Thick. The Legs Shall Have The Combination Of Ms Powder Coated And Chrome Plated. The Joints Shall Be Made By Using Tig Welding. There Shall Be Adjustable Leveler Provided With Metal Insert At Bottom To Avoid Scratches On The Floor. , Supplying And Placing Center Table With An Overall Size 1200Mm X 1200Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Rectangle Shape With Bevelled Edges. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 820Mm X 390Mm With The Assistance Of 31 Nos. Small Round Strips Having 5Mm Dia.The Under Structure Shall Have Ss 202 Grade Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. N , Supplying And Placing Center Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Rectangle Shape With Bevelled Edges. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 820Mm X 390Mm With The Assistance Of 31 Nos. Small Round Strips Having 5Mm Dia. The Under Structure Shall Have Ss 202 Grade Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. N , Supplying And Placing Center Table With An Overall Size 600Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Up Of 12Mm Thick Toughened Glass. The Top Profile Shall Be In Square Shape And The Edges Shall Be In Chamfer Shape. The Top Shall Be Supported On Vacuum Caps Situated Over Ss 202 Grade Pipe Frame. A Hanging Storage Shelf Shall Be Provided Below The Top Of Ss With An Overall Size 270Mm X 390Mm With The Assistance Of 9 Nos. Small Round Strips Having 5Mm Dia. And 370Mm Length. The Under Structure Shall Have Ss With Shiny Chrome Finish Pipe Frame Having Size 30Mm X 10Mm. 2 Nos. Foot Step Shall Be Provided Between The Pipe Frame With Size 30Mm X 10Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 1500Mm X 750Mm X 750Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1500Mm X 750Mm Made Up Of 45Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate And Finish As Per Shade Approved By Engineer-In-Charge. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Extruded Aluminium Profile Shall Be Attached On The Both Side Front And Back Side Of The Gable Ends And Bottom Side Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board Of Height 600Mm In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 2100Mm X 900Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Have The Size 2100Mm X 900Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With One Side Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edgebander Machine At 200 0C. The Table Top Shall Be Supported By Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Have The Size 1050Mm X 695Mm With 49Mm Thick And 100Mm X 695Mm With 18Mm Thick. The Gable End Shall Be Made Up Of Pre-Laminated Particle Board With Appropriate Pvc Edge Banding And Covered Both Side By Aluminium Section. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Desk. The Modesty Panel Shall Have An Overall Size 1400Mm X 400Mm With 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size 7200Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Round Front And Back And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End.It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Full Round Post Form And Other Edges Sealed With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be In Between.The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Conference Table In Completely Knock Down Conditions With An Overall Size Dia. 1200Mm X 750Mm That Is To Be Assembled At Site. The Table Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Circular Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Shall Be Supported On Ms Powder Coated Round Pipe Having 50Mm Dia With 1.6Mm Thickness And Over Particle Board Gable End Of 18Mm Thickness. The Table Understructure Shall Have 4 Nos. Of Legs. The Table Is Provided With 8Mm Thick Bottom Plate And 5 Mm Thick Top Plate. There Shall Be Gliders Provided At The Base To Avoid Scratches On The Floor. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Supplying And Placing Conference Table In Completely Knock Down Conditions With Per Seat Size 675Mm X 600Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be With Minifix Dowels, Pins And Ms Brackets. The Top Shall Be Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In C Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And The Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. The Modesty Panel Shall Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Connections Have To Be Made In Such A Way That No Gap Should Be Seen In Between. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380 , Supplying And Placing Corner Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Understructure Shall Consist Of Ss 202 Grade Pipe Frame With Shiny Chrome Finish With An Overall Size The Size 40Mm X 20Mm With 1.6Mm Thick. One Nos. Footstep Shall Be Provided Between The Frame With Same Size I.E. 40Mm X 20Mm. There Shall Be Ppcp Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Supplying And Placing Modular Table In Completely Knock Down Conditions With An Overall Size 1800Mm X 1650Mm X 750Mm That Is To Be Assembled At Site. The Work Top Shall Have The Size 1800Mm X 750Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380. The Top Shall Be 50Mm Thick On Edges, After 100Mm From Edges It Should Be 25Mm Thick. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. Extruded Aluminium Profile Shall Be Inserted In The Side Edges Of The Table On Both Side. The Table Top Shall Be Supported On Ms Powder Coated Pipe Frame Having Cross-Section Area 50Mm X 25Mm With 1.6Mm Thick. The End Wall Of The Table On The Side Shall Be Topped By Gable End. The Gable End Shall Be Made Up Of 50Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 900Mm X 450Mm X 750Mm. The Storage Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380. The Top Shall Be 25Mm Thick And All Other Profile I.E. Side, Back, Shutter, Shelf, Skirting Shall Be 18Mm Thick. The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have 1 Nos. Of Adjustable Shelf And 2 Nos. Of Door Shutters Shall Be Provided For Opening And Closing The Storage. The Shutter Shall Be Operated With Concealed Crank Hinge With Al Die Cast Handle As Well As Mp Lock Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close And Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board And ±0.2Mm For Metal. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. N , Supplying And Placing Nursery Classroom Table With An Overall Size 1400Mm X 300Mm X 550Mm. The Top Of The Table Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminated. The Top Profile Shall Be In Curve Shape With Round Corner And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Legs Shall Have The Combination Of Ms Powder Coated And Chrome Plated With 40Mm Dia. The Joints Shall Be Made By Using Tig Welding. There Shall Be Adjustable Leveler Provided With Metal Insert At Bottom To Avoid Scratches On The Floor. , Supplying And Placing Office Table In Completely Knock Down Conditions With An Overall Size 3000Mm X 1200Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of Medium Density Fibre-Board With Veneer Laminate Of Shade As Per Engineer-In-Charge. The Top Panel Shall Be In Rectangle Shape With 79Mm Thick (75Mm Mdf Plus 4Mm Natural Veneer And Pu). Veneered Portion Of Work Surface Shall Be Finish With Pu Polish. The Edges Of The Table Shall Be Supplied With Solid Brass Bar Strips Having Cross-Section Area 25Mm X 5Mm All Around Worktop. The Top Panel Shall Be Supported On Ms/Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Top Shall Be Enclosed With Flapper Box On Both Sides For Electric Provision Duly Polished. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be 63Mm Thick Made Up Of (59Mm Mdf Plus 4Mm Natural Veneer And Pu). The Table Shall Be Clad With 29Mm Thick (25Mm Mdf Plus 4Mm Natural Veneer And Pu) Modesty Panel Which Provide Structural Support For The Table. The Profile Of The Gable End And Modesty Panel Shall Be In Linear Shape With Appropriate Veneer Surface. There Shall Be Leveler Provided With Metal Insert At The Base To Avoid Scratches On The Floor As Well As Uneven Surfacing. The Table Shall Be Supplied With Both Side Pedestal Unit With An Overall Size 600Mm X 920Mm X 590Mm. Top, Side, Back, Facia Shall Be Made Up Of 18Mm Thick Mdf Board With Approved Veneer Laminate. It Shall Have 3 Nos. Of Drawer Operated With The Assistance Of Soft Closed Ball Bearing Channel And Grooves Handle For Easy Griping. The Complete Structure Shall Be Supplied With Approved Veneer Laminate And Pu Polish Accordingly. The Table And Pedestal Have To Be Made In Such A Way That No Gap Should Be Seen In Between. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board And ±0.2Mm For Metal. , Supplying And Placing Single Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm And Color As Per Direction Of Engineer In Charge. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 915±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm.N , Supplying And Placing Storage Unit With An Overall Size 600Mm X 450Mm X 1800Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Shelf, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have Four Nos. Of Adjustable Shelf. Door Shutters Shall Be Provided For Ease Of Opening With The Assistance Of Soft Closed Concealed Crank Hinge And Leather Handle. The Front Section Of The Shutter Shall Be Supplied Ss 202 Grade Pipe Frame (Loop) Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Understructure Shall Consist Of Ss 202 Grade Leg Having Cross-Section Area 80Mm X 20Mm With 1.6Mm Thick. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Storage Unit With An Overall Size 900Mm X 450Mm X 900Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Laminate I.E. Merino Luvih Antique Walnut 37380 And Finish As Per Approved Shade. All Profile I.E. Side, Back, Top, Shutter, Shelf, Skirting Shall Be 18Mm Thick And The Edges Shall Be Sealed With Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Storage Shall Have Two Nos. Of Adjustable Shelf. Door Shutters Shall Be Provided For Ease Of Opening With The Assistance Of Soft Closed Concealed Crank Hinge And Leather Handle. The Fornt Section Of The Shutter Shall Be Supplied Ss 202 Grade Pipe Frame (Loop) Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Understructure Shall Consist Of Ss 202 Grade Leg Having Cross-Section Area 80Mm X 20Mm With 1.6Mm Thick. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Boards Used Should Meet International Standards Of Quality And Safety, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Elasticity Bending Tested As Per Is 2380. , Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1900±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. N , Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Structure Shall Be Upholstered With Pure Leather Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Pipe Frame Loop Leg Of Ss Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1540±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1900±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. , Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Leatherite Tapestry 1±0.2 Mm Thick And 571 Gsm And Color As Per Direction Of Engineer In Charge. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. N , Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³ In Seat And 32Kg/M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg/M³. The Complete Structure Shall Be Upholstered With Pure Leather Tapestry 1±0.2 Mm Thick And 571 Gsm. The Understructure Shall Consist Of Ss 202 Grade Loop Leg With Shiny Chrome Finish Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 510±10 Mm(D) X 1040±10 Mm(W), Seat Height = 435±10 Mm, Overall Width = 1360±10 Mm, Overall Depth = 770±10 Mm And Overall Height = 800±10 Mm. , Wooden Bench 2.191 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.2 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respect , Wooden Bench 2.242 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.282 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.494 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.57 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 2.703 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.022 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.024 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.025 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.1 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.182 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.192 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.34 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.386 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.5 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.559 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.58 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.621 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.7 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.895 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.922 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects. , Wooden Bench 3.929 Meter Length. The Bench Shall Be Made Up Of `1St Class Seasoned Teak Wood` And Thickness Of Wood Plank (Seat And Back) Shall Be 38Mm And Clear Depth Of Seat And Back Support Shall Be 460Mm. The Arms/Legs On Both Ends Of The Bench Shall Be 60Mm Thick Wooden Planks And There Shall Be Legs/ Supports In Between Of 38Mm Thick Wooden Plank. The Shop Drawings Of The Bench With Size Are Enclosed And Photograph Of The Bench Is Also Enclosed For Reference. The Entire Bench Is Finished With High-Quality Melamine Polish Compling With Astm D1475 And Astm D2369 Complete In All Respects.
Contract Date: May 11, 2026 Contract Value : ₹ 17.47 Crore
Government Departments No of Bidders 5
Haryana View Result →
43.
Defence #10793129 Price Bid
Tender For Additional / Alternator Certain Offer Md Accommodation Under Age B/R I At Chandimandir; 1 Taking down chowkats or frame not exc. 1.5 Sqm with shutters, without taking off shutters from the frame,complete all as specified and directed. 2 Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame,complete all as specified and directed. 3 Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed. 4 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 5 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge 6 35mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge. 7 35mm thick second class hard wood glazed and Skeleton shutteropen rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc.; Size of members of shutters as specified in SSR Part 1, Section 8, clause8.24 (a); supplied and fitted to chowkats complete all as specified and directed. 8 150 mm size aluminium anodized, barrel tower bolt (ISI Marked) of extruded section complete all as specified and directed. 9 Aluminum alloy, anodized, sliding door bolt 2500mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. 10 Butt hinges 100mm long, of extruded aluminium alloy with galvanised mild steel hinge pin, complete all as directed. 11 150mm size aluminium handle (ISI Marked), cast type, anodised,complete all as specified & directed by Engineer-in-charge. 12 Dismantling boarding, any type and any description, fixed any position with nails all as specified and directed. 13 18mm thick HDHMR Board of uniform density not less than 850 kg/m3, both faces of HDHMR board shall be prelaminated as per approved design, fixed as in cupboard shutters complete all as specified and directed by Engineer-in-charge. 14 PVC body magnetic shutter catcher for kitchen cup boards cabinets etc, complete all as specified and directed. 15 Continuous (piano) hinges, mild steel bright finish, width of flap when open30mm, complete all as specified and directed. 16 1.5mm thick scratch proof high gloss Acrylic sheet, to be pasted on front shutters of HDHMR board, complete all as specified and directed by Engineer-in-charge. 17 20mm wide & 1mm thick PVC edge beading of PVC pasted on edges with suitable adhesive, complete all as specified and directed. 18 Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down,screwed both end for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. 19 Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. 20 Wall / sink mixer for mixing hot & cold water, chromium plated suitable, and screwed down for 15mm bore GI pipe or union, fixed as in repaircomplete all as specified and directed. 21 WHB mixer, for mixing hot or cold water, screwed down for pipe and fixed, suitable for 15mm bore pipe fixed as in repaircomplete all as specified and directed. 22 Harrison rails 25 mm size, mild steel, chromium plated with fixing brackets, stops, rollers etc. for curtain rod inclulding taking down defective bracket complete all as specified and as directed. 23 Towel rail 600mm long ofmild steel, chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats, fixed as in repair complete all as specified and directed. 24 Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repaircomplete all as specified and directed 25 Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repair complete all as specified and directed. 26 PVC connections 15 mm size with PTMT nuts of length 450 mm , fixed as in repair complete all as specified and directed. 27 Vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, with all fittings and connection, fixed as in repairs complete all as specified and directed. 28 Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 940 x 460 x 203mm, bowl size 405x354x203mm incl fixing of cantilever brackets to wall with making hole complete in cement mortar 1:2 and connection to union, pipe, fixed as in repair complete all as specified and directed. 29 Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repairs, complete all as specified and directed. 30 Single piece EWC (one piece), minimum size 715 x 335 x 715mm, , snow white colour, S-trap with integraed flusing cistern, including slim soft close seat cover , fixed as in repairs, complete all as specified and directed. 31 Precast concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade,laid over and including 25mm thick sand cushioning,well ramming complete all as specified and directed 32 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. 33 Demolition of brick masonry, built in cement mortar including all quoins arches, pillars etc completeall as specified & directed 34 Brick work using old size sub class B bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:4, complete all as specified and directed. 35 15mm thick rendering in Cement and Sand mortar 1:4 over brick , concrete surfacesfinished fair and even without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed. 36 Applying Two or more coats on new plastered surfaces of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paintof required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. 37 Two coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed. 38 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premises, complete all as specified and directed. 39 Non skid ceramic coloured tiles7 to 8 mm thick, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed. 40 Glazed coloured ceramic tiles in vertical surface 450mm x 350 x7mm thick, set and jointed in neat cement slurry over 10mm thick thick rendering in cement mortar 1:4, for receving the tiles,complete all as specified and directed. 41 Coloured vitrified ceramic tiles, light shade,10mm thick (square / rectangular) , area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. 42 All as per serial item 41but as in skirting/ daddo including,over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. 43 15-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and likein cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade ofgranite over and including 15mm thick screed in cement mortar 1:6 complete all as specified and directed. 44 Granite stone slabs, 16 to 18mm thick,width and length as per site requirement, best qualitymachine cut andpolished to be fixed infloors,cooking platform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edgesand corners where required with and including 15 mm thick screed bed in cement mortar 1:4, Complete all as specified and directed. 45 Dismantling plain or corrugated steel sheeting, AC sheetany gauge, thickness, including nainital or similar pattern roof coverings complete all as specified & directed by Engineer-in-charge. 46 Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. 47 Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified & directed by Engineer-in-Charge 48 Rolled sections as in main and cross beams, hip and jack rafters,purlins where connectedto common rafters and running rails and guidesforsliding doors, fixedwithangle cleats or other connecting plates, conforming to Fe-290 Gde E165, all as specified and directed. 49 Two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. 50 PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints fixed to wall/floor including taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, fixed as in repaircomplete all specified and directed. 51 110mm bore PVC (SWR) bends any radius, complete all as specified and directed 52 Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators/ partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. 53 Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge 54 Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) ofapproved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. 55 4.80mm thick ordinary quality tinted glass,fixed to aluminum frame workin panels not exc 0.5 Sqm in each pane, complete all as specified & directed. 56 4.80mm thick ordinary quality tinted glass,fixed to aluminum frame workin panels exc 0.5 Sqm in each pane, complete all as specified & directed. 57 Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staplescomplete all as specified & directed. 58 Food grade stainless steel wire in any baskets of a modular kitchen (storage basket, cup and saucer basket, jas basket, thali basket, cutlery basket, grain trolley , plain basket, bottle pull out etc), minimum loading capacity65 Kg, made by min 6 mm dia stainless steel round bars, proper welded and joints finish by grinding, chromium plated finish, fixed properly with WPC board of any thickness as per design approved, including fixing of auto closing hinges, ball bearing runners of any description, stainless steel handles fixing clips, sliding frame structure, SS screw etc complete all as specified and directed by Engineer-in-charge.Note:1. Only weight of SS wire basket will be measured before fixing.2. Only Fixing of all Fitting/fixtures like handles, hinges, ball bearing runners, telescopic channels etc are included and will be paid in separate items as supply only. 59 Supply only of soft auto closing hinges openable at 0 degree for kitchen cabinet shutters Make :Hettich/Ebco/ Prime 60 Supply only Ball bearing runners 45 mm soft closing Telescopic Channel (20 Inch) full extension load capacity 50 Kgs, Black powder coated, Make :Hettich/Ebco/ Prime 61 Metal profile section for each shutter in kitchen cabinets either below or above slab complete all as specified. 62 Excavation in post holes (or similar hole) each in hard and dense soil n.exc 0.50 cu m getting out and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed. 63 Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, sub base and mass concrete complete all as specified & directed. 64 Plain cement concrete type B-0, 1:2:4 using (2012.5 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. 65 Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0,all as specified and directed. 66 Powder coated GI Frame work grid Size of grid 605 x 605mm for ceiling comprising of Gl periMetre channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, complete all as specified and directed 67 4mm thick Nonasbestos fibre cement building boardsfixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified. 68 Factory made 18mm thick solid WPC (Wood Polymer Composite) board of density 650 Kg /cum of one sideprelaminated / rigidlam with any colour and other side balancing laminate as in cup board/ kitchen cabinet shutter/ drawer, front shuters, fixed with screws, solvent/ adhesive, complete all as specified and directed. 69 Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socketor power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete 70 Material and labour forpoint wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single coremulti stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising ofOne light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account.Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account. 71 All as per serial item 70 herein before but for socket outlet 3 pin 6 Amps on independentboard complete all as specified and directed 72 Switch modular type (ISI marked), single pole, one way 6 Amps, one module(ISI marked), complete all as specified & directed. 73 Switch modular type (ISI marked), single pole, one way 16 Amps, one module(ISI marked), complete all as specified & directed. 74 Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. 75 Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specifiedand directed by Engineer-in-charge. 76 Decorative wall light 12 watt LED indoor type antique design, synthetic type material, perfect ambience for living . Bedroom suitable for all type of lamp complete all as specified and directed. 77 LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver,includinglamp bracket upto 1.5metre length as per suitable for fitting including clamp with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, including taking down old street lght complete all as specified and directed. 78 Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mmand provision of flexible copper cable 3 core from ceiling rose to exhaust fan complete all as specified and directed. 79 Cutting openings, through brick walls in round shape , for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge. 80 Taking down carefully Geysers of any capacity and removing with materials to store for keeping in safe custody by the contractor and deposit to the MES store yard, check its serviceability and futher action, complete all as specified & directed 81 Fixing only seviceable Geysers of any capacity and connecting up with existing site as sper direction compelte received from MES store yard complete all as specified and directed. 82 Electric water heater(vertical type geyser), capacity 25 litre, 2 KW BEE 5 Star rated AC single phase, including MS glass lined inner tank, glass coated heating element, high density PUF insulation, Anode rod protection, heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolts with all accessories such as safety valve, thermostat, NRV, connection piece etc. making necessary inlet / outlet water connection, testing on load including connection with 3 core PVC insulated, sheathed, stranded copper conductor cable / flexible shord with plug complete all as specified and directed. 83 Electric auto clean glass chimney (ISI Marked) with invertor technology, suction capacity 1400-1500m3/h, Filterless tech 6062 BLDC AC 9 speeds control brushless powerful DC motor, Touch controls with motion sensor, wave and start, stainless steel body black colour with LED light including flexibly adjustableto lenght PVC pipe 150mm for fixing in wall inside and outside for exhaust cooking air through chimney with louvers complete all as specified and directed. Make as approved by GE
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Haryana View Result →
44.
Housing Urban and Rular Development #10776428 Price Bid
Construction Of Gdc Majalta (Purchase Of College Furniture). Please Refer To Boq , Manufacturing,Providing & Placingin Position Machine Factory Assembled Cabin Office Table With Side Unit With Following Details And Specifications : Top And Legs Are Made Of 38 Mm Thick Mdf (E-1 Grade), Finish With Matching 2 Mm Pvc Edge-Banding. The Modesty Panel Is Made Of Prelam Particle Board Grade E-1 (Environmental Friendly) Of Thickness 18 Mm Mdf With Edge-Banding(Pvc) 2 Mm. Drawer Unit :3 Drawer Melamine Finish Pedestal Of Overall Dimensions Internal And External Dimensions 380-430 Mm (W) X 430-480 Mm (D) X 600-620 Mm ( H). Drawer Should Be Made Of 18Mm Thick E1 Grade Particle Board. Each Pedestal Should Have 5 Nos Castor Fitted To It Where In One Castor Will Be Fitted To Lower Most Drawer To Provide Extra Stability. E1 Grade Laminate With Zero Urea Formaldehyde Emissions (
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Jammu And Kashmir View Result →
45.
Defence #10776168 Price Bid
Tender For Urgent Infrastructure Upgrades At Ada-Nftc; 1 Demolishing brickwork in cement mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material away from the site as per directions of Engineer-in-charge. 2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. And maintaining the required slight slope at the entrance for easy movement of vehicles * Nominal concrete 1:4:8 or leaner mix. 3 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for existing tiles. All dismantled materials should be taken away from the site. 4 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes away from the site as per direction given by Engineer-in-charge. 5 Dismantling G.I. pipe including stacking of dismantled pipesas per direction of Engineer in-Charge with Internal Work- Exposed on wall.All dismantled materials should be taken away from the site. 6 Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including disposal of unserviceable materialsaway from the site. 7 Dismantling/Removal of existing MS grill windows located at 1st& 2nd floor, scope includes shifting those windows to a suitable place and finishing works after removal(plastering and leveling, painting etc) 8 Charges towards removing existing UPVC window &refixing of another place cost including civil work painting etc approximate size of UPVCwindows 1.2mtrX1.5mtr. 9 Dismantling, shifting and reassembling of exciting wooden storage located at room no 14 of size 2m x 0.5m with neat and attractive finish, including transportation, shifting, labor, complete and all other details as per ADA instructions. 10 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by manual or mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge. 11 Charges towards Rental bases movable Scaffolding, installation charges include labor, loading - unloading, two time transportation. 12 Providing and laying of Cement Concrete 1:4:8 with 40 mm nominal size aggregates for flooring bed of 150mm thickness. Including the cost of all materials, labor, compaction, leveling, at all levels, leads and lifts, curing, shuttering etc complete as per ADA instructions. 13 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure in all shapes and sizes in with Cement mortar 1:4 (1 cement : 4 coarse sand). The rate is inclusive of cost of transportation, labour for shifting, necessary tools & machineries etc., with all leads and lifts and as directed by Engineer in charge. 14 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure with Cement mortar 1:4 (1 cement :4 coarse sand). The rate is inclusive of cost of transportation, labor for shifting, necessary tools & machineries etc., with all leads and lifts and as directed by Engineer in charge. 15 Providing and laying vitrified floor tiles of size 600x600 mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc complete as per ADA instructions.Including Size of Tile 600x600 mm/300mmx450mm (dadoing same as rough plastering ). 16 Providing and fixing Ist quality vitrified wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,of any size as approved by Engineer-in-Charge, in dado, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 17 12 mm cement plaster of mix for Internal plastering with 1:4 (1 cement: 4 fine sand)etccomplete as per ADA instructions. 18 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. (Ceiling)etccomplete as per ADA instructions. 19 Rough cast plaster with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement with ordinary cement finish using ordinary cement etc complete as per ADA instructions. 20 Providing and applying two component high performance polymer modified cementitious waterproofing, FosrocNitocoat CM 210 or equivalent having minimum parameter (a) Resistance to positive water pressure bar(DIN 1048)Pt 5: 5 (50 m head of water).(b) Resistance to negative water pressure (ITM / FTM-181): 3 bar (30 m head of water).(c) Static crack accommodation: 0.9mm.(d) Abrasion resistance (ASTM D4060): Wear Index (equivalent to 40 N conc).(e) CO diffusion resistance (Taywood method) :> 50 m - after 5,000 hrs QUV2.(f) BS 6920: 1990 Effect on Water Quality.(g) Water Byelaws Scheme approved, product listing No. 0510522.(h) DIN 1048: Water Penetration Test.(i) Fire Tested to BS 476: 1987 Parts f and g.The system includes base preparation of cleaning, brushing and removal of flaky Materials, grouting the porous area with cementitious grout, proper coving between slab and wall junctions and applying FosrocNitocoat CM210 in two coats with total Consumption @ 3.8kg/M2. Coating shall be done on the Entire horizontal surface and vertical surface. 21 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high-pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer linesetccomplete as per ADA instructions. 22 Wall painting with acrylic emulsion paint of approved shade to give an even shade with two or more coats etccomplete as per ADA instructions. 23 Providing & rendering approved shade ofsynthetic enamel paint 02 or more coats over a coat of Zinc Chromate metal primer by scrapping worn-out surfaces of existing wooden doors, MS frames/ shutters / window grills, filling cracks and crevices etc., complete. All as per OEM specification and as per sample available atADA. All works to be done as per ADA Instructions. 24 French spirit polishing of approved shade with two or more coats including a coat of wood filler etc complete as per ADA instructions. 25 Supply and fixing of 4mm ACP cladding or puff panels wherever required as per directions of Engineer-in-charge. 26 Providing, fabricating & installation of wall mounted wooden storage units of depth 450 mm, made out of 18mm thick ply wood, external surface finish with 01mm thick laminate matching to the existing color& shade and all exposed side finish with teakwood beading, internal surface finished with 0.80 mm laminate, with standard hardware’s such as lock, C type PC handles, piano hinges, skirting, locking arrangement, etc. complete neat and attractive finish, including transportation, shifting, labor etc,. And as per sample available at ADA. 27 Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqmupto 4.00 sqm.) 28 Provision of cloth hanging board of plywood board with higher capacity cloth hangers and should match with existing laminate to maintain aesthetics, scope includes shifting of existing board to the placeas per user requirement 29 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. 30 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 31 Providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350 mm and 340x410x265 mmsizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting andmaking good the walls and floor wherever required etc complete as per ADA instructions.Single half stall urinal with 5 litreP.V.C. automatic flushing cistern. 32 Providing and fixing of White Vitreous China Wash basin size 550x400 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require etc complete as per ADA instructions. 33 Providing, fabricationand installation of ventilators/windowmesh shutter made out of powder coated Aluminumsectionsof size 1 ½” x ¾” (medium gauge) andTataSS mesh fillerincludinganchoring to wall/ceiling,filling the gaps with silicon, transportation, labor etc complete as per sample available at ADA. 34 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ Sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/Sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 35 Providing and fixing 100 mm sand cast Iron grating for gully trap. 36 Providing and fixing mirror of superior glass (of approved quality) of Rectangular shape 1500x450 mm with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including all accessories etc complete as per ADA instructions. 37 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour with 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms including all accessories etc complete as per ADA instructions. 38 Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. 39 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge etc complete as per ADA instructions. 40 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls including all accessories etc complete as per ADA instructions. 20 mm nominal dia Pipes 41 25 mm nominal dia Pipes 42 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter 43 110 mm diameter 44 Providing and fixing brass stop cock of approved quality with 15 mm nominal bore including all accessories etc complete as per ADA instructions. 45 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931 with 15 mm nominal bore including all accessories etc complete as per ADA instructions. 46 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 with 15mm nominal bore including all accessories etc complete as per ADA instructions. 47 Providing and fixing PTMT grating of approved quality and colour with Circular type of 100 mm nominal dia including all accessories etc complete as per ADA instructions. 48 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms including all accessories etc complete as per ADA instructions. 49 Providing and Fixing C.P health faucet of approved quality conforming to IS: 8931. 15mm nominal bore (jaquar make cat no: ALD -CHR-573)as directed by engineer i/charge. 50 Providing and fixing CPVC Control valve 25 mm nominal bore as per the direction of Engineer in charge. 51 Providing and fixing CPVC Control valve 40 mm nominal bore as per the direction of Engineer in charge. 52 Supply and installation of Stainless steel Tissue paper holders of approved model. 53 Providing and fixing of PVC Nahanitrap (floortrap ) of approvedqualityandmake and confirming to ISI specificationsincluding construction ofCC : 1:2:4as directedby Engineer-in – charge including all accessories etc complete as per ADA instructions. 54 Providing, fabricating & Installation of Full height Aluminum Partition including doors. All the Vertical & Horizontal members shall be powder coated AL Sections of size 65 x 40 x 1.2 mm heavy gauge forming a grid as per drawing enclosed. The partition shall be rigidly fixed to wall / Ceiling / floor, etc for stability, the filler material shall be 05 mm thick clear glass or pin head glass fixed using AL snap fit clips, rubber gaskets, etc complete as per samples available at ADA. 55 Providing & fixing interior partition of 8mm thick ply board fixed with minimum wooden support at backside between the existing ms tube frames and later pasted with approved matt finished laminates on the partition as per the approved design including labor, material, transport etc complete. 56 Supply and fixing of 0.50mm Meta cabcolor coated Roofing sheet along with necessary hardware, cap all as per specification of OEM, etc complete as per sample available at ADA. 57 Providing, fabricating and installation of MS frame structure using hollow section, angle sections and suitable anchoring nuts and bolts of ISI make incl civil work, scaffolding required for erection of structure, curing, etc, complete. 58 Supply, Installation and commissioning of recess mounted 2 x 2 36 Watts LED fitting to be fixed on ceiling by using anchor fasteners, including suitable PVC insulating copper flexible wire connectionetc, complete all as per instructions ofADA and OEM standards. 59 Supply of LED round recess mount down lighter with 9W system wattage. Housing shall be with powder coated pressure die cast aluminium alloy with corrosion resistant polyester powder coat & with extended heat sink. Diffuser/cover made of Lexan plastic material. Rated life shall be L70 @ 50000Hrs. which shall has inbuilt electrical protection like over/under voltage, short circuit, over load, open circuit &miswiring. Driver is on constant current driver output driver @ 0.6A with PF >0.9 with line voltage @ 220-240V @ 50/60Hz, driver efficiency> 85% & THD < 15%. LED Efficiency> 130 lm/W at 1W & fixture efficiency > 100Lm/W with CRI >75 with injection molded polycarbonate lens. 60 Supply of Decorative Wall light of 2 LED with 10W system wattage.Rated life shall be L70 @ 50000Hrs. which shall has inbuilt electrical protection like over/under voltage, short circuit, over load, open circuit &miswiring. Driver is on constant current driver output driver @ 0.6A with PF >0.9 with line voltage @ 220-240V @ 50/60Hz, driver efficiency> 85% & THD < 15%. LED Efficiency> 130 lm/W at 1W & fixture efficiency > 100Lm/W with CRI >75 with injection molded polycarbonate lens. Similar to Havells LUMILINE+BS10WLED865SPCSS 61 Supplying and Installation of exhaust fan of 1440rpm of 450mm (18) size with bracket blades complete for light duty suitable to operate on 230V 50Hz 62 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. 63 Supply , Installation, commissioning & testing of 8 Module box to be accommodate with 01No of 10AmpsMCB & 03Nos of 5/15A power socket outlet fixed on wall (with boxes) 5A indicator switch type, housed in table as required by user. 64 Supply , Installation, commissioning & testing of 6 Module box to be accommodated with 01No of 10AmpsMCB & 02Nos of 5/15A power socket outlet fixed on wall (with boxes) 5A indicator switch type, housed in table as required by client. 65 Supply and Laying of 2.5Sqmm 3Core PVC Flexible copper cable. (For UPS points) 66 Provision of fixing of Casing/Capping of 2” x 2” box for the ups as well as raw power points on wall with suitable fixtures 67 Supply and installation of customized table :-Pre stand table of size 1800 x 900 x 750 mm.Table top- 25 mm thick action Tesa pre-laminated board.Legs: 25 mm thick PLPB with 2mm PVC edge bonding finish.With necessary hardware of EBCO company and 18 mm thick modesty. 68 Supply & installation High back Pure leather revolving chairs for officer, size approximately 76.10L x 76.10D x 114-131.50H CM Leather high back chair. 69 Supply & installation of Mid back Pure leather revolving chairs for visitor’s size approximately 76.10L x 76.10D x 96.50-114H CM Leather Mid back chair. 70 Supplying and installation of Single bed sized wooden Cot. 71 Providing and fixing diningtable consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Hardware-Minifix assembly and screw leg., as per specifications, as directed by Engineer in charge (4 seater). 72 Providing wooden Dining upholstered chairs as per selection. 73 Mattresses Dimensions: 183L X 76W X 12.7T in cm Support Type and Comfort Layer: PU Foam Mattress Features: Reversible Mattress
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Karnataka View Result →
46.
Defence #10774093 Price Bid
Tender For Welcome Maintenance Of Offrs Md Accn In Zone A Area Of Age B/R-I Under Ge (A) Ahmedabad-- 1 Notes : (i) The work consists of 01 job as under:- JOB (A) : MAINT GRANT 2024-2025(ii) Please refer schedule A notesbefore quoting the tender.(iii) Amount of Schedule of Credit shall be deducted off line by the department. 2 Taking up or down steel tubing and connections of any description and from any position incl cleaning for refixing or removing from site complete all as specified and directed 3 15mm bore of pipe 4 20mm bore of pipe 5 25mm bore of pipe 6 S&F forGI tubing concealed or open incl replacing of unserviceable GI fittings, medium grade ISI mark like elbow, socket, nipple, union socket, tee etc with the existing size complete including making necessary threading work to be carried out upto any height or on walls for 15mm bore of pipe complete all as specified and directed 7 S&F for GI tubing concealed or open incl replacing of unserviceable GI fittings, medium grade ISI mark like elbow, socket, nipple, union socket, tee etc with the existing size complete including making necessary threading work to be carried out upto any height or on walls for 20mm bore of pipe complete all as specified and directed 8 S&F for GI tubing concealed or open incl replacing of unserviceable GI fittings, medium grade ISI mark like elbow, socket, nipple, union socket, tee etc with the existing size complete including making necessary threading work to be carried out upto any height or on walls for 25mm bore of pipe complete all as specified and directed 9 S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 20mm bore (Minimum weight 210 gms) complete all as specified and directed. 10 S&F in repairs bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. 11 S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90 gms) complete all as specified and directed 12 S&F in repair 15 mm dia bore pillar taps cast copper alloy with capstan heads chromium plated fixed in repairs 15mm bore fancy type screwed down, high pressure with long screwed shanks and fly nuts, screwed down for iron pipe or for union. 13 S&F in repairs two way bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. 14 S&F in repair two way angle valve chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle for pipe of 15mm/20mm bore complete all as specified and directed. 15 S&F in repair Stop valve of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90gms) complete all as specified and directed 16 Supply and fixing in repairfor 15mm bore CP central hole basin mixer for WHB mixer complete all as specified and directed. Make:- Jaguar,Plumber,Cera 17 Supply and fixing in repair 15mm borefor CP wallmixer for mixing hot or cold water screwed downiron pipes complete all as specified and directed. Make:- Jaguar,Plumber,Cera 18 S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe 20mm bore (Minimum weight 112gms) complete all as specified and directed. 19 S&F in repair stop/angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle for pipe of 15mm/20mm bore complete all as specified and directed. 20 S&F in repair waste coupling of PTMT (half or full threaded) for discharge pipe of 32mm/40mm bore (Minimum weight 45gms) complete all as specified and directed . 21 S & F in repairs 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed. 22 S&F in repair 10 litres PVC valveless, syphonic action type flushing cistern, with inlet ball valve, float and handleincloding brackets and PVC connections 15mm size with PTMT nuts oflength 600 mm complete all as specified and directed 23 S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. 24 S&F in repair Rotational moulded polyethylene Water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed 25 M&L for cleaning of 1000 litre PVC Rotational moulded polyethylene Water storage tanks by empty the tank completely use mild detergent of tank cleaning solution, to scrub the inside of the tank, rinse the tank thoroughly to remove any residue, Use a disinfectant like bleaching powder or calcium hypochlorite to kill bacteria and other microorganisms and finaly Rinse the tank again to remove any remaining bleach complete all as specified and directed. 26 M&L for cleaning of 500 litre PVC Rotational moulded polyethylene Water storage tanks by empty the tank completely use mild detergent of tank cleaning solution, to scrub the inside of the tank, rinse the tank thoroughly to remove any residue, Use a disinfectant like bleaching powder or calcium hypochlorite to kill bacteria and other microorganisms and finaly Rinse the tank again to remove any remaining bleach complete all as specified and directed. 27 S&F in repair PVC lids for water storage tank of cap 500 Litres/1000 Litres complete all as specified and directed . 28 Repair to GI tubing concealed or open incl replacing of unserviceable GI fittings, medium grade ISI mark like elbow, socket, nipple, union socket, tee etc with the existing size complete including making necessary threading work to be carried out upto any height or on walls for 15mm bore of pipe complete all as specified and directed 29 Repair to GI tubing concealed or open incl replacing of unserviceable GI fittings, medium grade ISI mark like elbow, socket, nipple, union socket, tee etc with the existing size complete including making necessary threading work to be carried out upto any height or on walls for 20mm bore of pipe complete all as specified and directed 30 S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, overall size 495mmX420mm bowl size 410mmX330mmX160mm. 31 S&F in repair 300 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete all as specified and directed 32 S&F in repair Double/Singleaction spring hinges brass, with phosphor bronze wire spring, bright polished 100mm, complete all as specified and directed 33 S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples all as specified and directed 34 S&F Floor door stopper 150mm of amuminium alloy body and tongue, nodised, with dard drawn steel spring all as directed fixed in repairs complete all as specified and directed 35 S&F in repair Floor door stopper 150mm of amuminium alloy body and tongue, nodised, with dard drawn steel spring all as directed fixed in repairs complete all as specified and directed 36 S&F in repairs 4mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed 37 S&F in repair MS handles for steel windows (left or right) 150mm size complete all as specified and directed 38 S&F in repairs 18/19 mm thick12057Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-workcomplete all as specified and directed 39 S&F 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and directed. 40 S & F magnet catcher 50 mm size for kitchen cup board shutter complete all as specified and as directed. 41 S&F 30mm width open flap Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as spacified and directed 42 S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed. 43 S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection with cast iron P trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe)complete with provision of lime concrete bedding including taking down/ Dismantling existing unserviceable WC of any description and in any position & fixingnew WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed. 44 S & F in repair vitreous china wash basin, white flat back , size 550mmx450mm with and including Waste fittings, brass, chromium plated forbasins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated fancy typepillar tap 15mm bore,screwed down high pressure with or without lettered hot or cold with long shanks, screwed for iron pipe complete all as specified and directed. 45 S&F in repair vitreous china Wash down water closet (pedestal pattern), complete including Pedestal pan and trap and seat cover, including connection to drain ( or outgoing pipe) and flushing pipe, antisyphonage pipes etc (excluding flushing cistern and flush pipe)complete 46 Supply and Fixing in repair for European type EWC (Cascade type) with integrated flushing cistern, EWC seat cover and with necessary fittings complete all as specified and directed. Make :- Jaquar/Marc . 47 S & F in repair Glass corner self fancy type 250x250 and 10mm thick fixed its brass bracket and screwed complete all as specified and directed. Make : Jaguar Cat No 7771 or equivalent of Marc/ESS 48 S & F in repair PVC coloured bath cabinet overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed. Make :- Prayag or Equivalent 49 S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumisedhanging device complete all as directed. 50 Cutting chases of brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends for concealed water tubing etc and making good, cutting exceeding 10cm but not exc 20 cm girth complete all as specified and directed 51 S&F for 19/20 mm harrison rail/curtain rails stainless steel chromium plated with fixing brackets stops fixed in repairs complete all as specified and directed 52 S&F 600mmX450mm size bevelled edge mirror of selected quality glass 5mm to 5.5mm thick mounted on 6mm AC building board or commercial ply wood and plastic framing fixed to plugs with CP brass screws and cup washers fixed in repairscomplete all as specified and directed. 53 Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed 54 M&L Granite slab work 18-20mm thick in floors steps,riser,wall cladding, cooking platforms and likeincluding pointing in white cement with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed . (Note : No deduction shall be made for opening of sink portion, shall deemed to be included in the quoted rate) 55 Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each complete all as specified and directed 56 Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 Sqm each complete all as specified and directed 57 Taking down shutters of any descriptionexc 1 Sqm but n exc 2.0mcomplete all as specified adnd directed. 58 S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl decorativelaminated sheet on both faces complete all as specified and directed 59 S&F factory made35 mm thick2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed 60 S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed 61 M&L for Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified. 62 M & L for preparation of old painted wooden : surfaces of any description postion and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed 63 M & L for preparation of old painted steel : surfaces of any description postion and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed 64 S&F solid PVC door frame of size 50mmX47mm made out of 5mm both side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening all as per specifications and drawing shown on sl page No 150 of SSR part II (for item-884) complete all as specified and directed 65 S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & both side prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed 66 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed . (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 67 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed . (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 68 S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 69 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed . (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 70 Providing and fixing factory made uPVG white colour Sliding window of area n exc. 2 Sqm, Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) 71 S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding 3 track , AC opening using powder coated aluminium sections of approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangementsetc, frame of window should be of 1.5 mm thick section & shutter secincluding cutting down existing glazed/gauge shutter completeall as specified and as directedNote :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handleetc 72 S & Faluminium anodisedventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members andhalf portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminiumbeading complete all as specified and as directed. 73 S&F for butt hinges 100mm size medium weight stainless steel . 74 M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed. 75 S&F Aluminium anodised barrel tower bolt of extruded section 200 mm sizecomplete all as specified and directed. 76 S&F aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed. 77 Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed. 78 S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest)/Asbestos Cement white fiber Board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction. 79 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. 80 M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.complete all as specified and directed. 81 M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified 82 M & L for coloured double chargedVirified Ceramic tiles light/Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including screed bed or bedding layer 15mm thick in cement mortar 1:4 including roughening of old surface complete all as specified and directed. 83 M & L for coloured double chargedVirified Ceramic tiles light/Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 10mm thick backing coat of CM 1:6 including roughening of old surface complete all as specified and directed. 84 M & L for colouredvitrified ceramic tile, light shadeflooring of sizeof tile 600x600x8-10mmthick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 including roughening of old surface complete all as specified and directed. 85 M & L for colouredvitrified ceramic tile, light shadeof size 600x600x8-10mmthick as in skriting set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including 10 mm thick rendering in CM 1:4 complete all as specified and direceted. 86 Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed. 87 M&L for rendering on external wall fair faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @3% by the weight of cement or as per manufacturers instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. 88 M&L for 10 mm thick rendering on internal wall surfaces other than fair faces of brick/concrete surfacesin CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed 89 M & L for 5mm thick rendering on cement concrete as in ceiling with cement mortaar 1:3 complete all as specified and directed. 90 Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed 91 M&L for preparation of the newly plastered surfacesof walls & applying two coatsOil bound distemper, white or tintedover a coat of primer surfaces of wall complete all as specified and directed. 92 M&L for preparation of new plastered surfaces on wallsand applying two coats of cement based paint over one coat ofPrimer on walls complete all as specified and directed. 93 M&L for preparationof new surfaces of ceiling plastered sheet andapplying three coat of white wash complete all as specified and directed 94 M&L for perparation of old decorated surface of ceiling by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applyingone coat of white wash on ceilings. 95 M&L for perparation of old decorated surface of ceiling by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applyingTwo coats of white wash on ceilings complete all as specified and directed. 96 M&L for perparation of old decorated surface of walls (plastered/unplastered) including cornices, pilasters etc by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applyingone coat of Oil bound distemper on wall complete all as specified and directed. 97 M&L for perparation of old decorated surface of walls (plastered/unplastered) including cornices, pilasters etc by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applyingTwo coats of Oil bound distemper on wall complete all as specified and directed. 98 M&L for perparation of old decorated surface of walls (plastered/unplastered) including cornices, pilasters etc by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applyingone coat of cement base paint on walls complete all as specified and directed. 99 M&L for complete removal of existing treatment on wall by brooming down or scraping down smoke ,soot moulds,moass and efflorcocent salts trading oil and greasy sposts to surfaces of wall and Finishing walls with Acrylic Smooth exterior paint of required shade, Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. 100 M&L for complete removal of existing treatment on wall by brooming down or scraping down smoke ,root moulds,moass and efflorcocent salts trading oil and greasy sposts to surfaces of wall and applying two coats of cement base paint over a coat of alkali resistace primer complete all as specified and directed. 101 M&L for complete removal of existing treatment and applying two coats of Oil Bound Distemper over 1mm thickavg plaster of paris wall care putty and alkali resistant priming paint on wall.complete all as specified and directed. 102 Demolition ofBrick work or stone/boulder masonry, build in cementmortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 103 M&L for brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed 104 M&L Brickworkwith old size sub class B bricks, straight or curved on plan to any radius in half brick thick walls, built in In CM (1:4) complete all as specified and directed 105 Repair of steel window shutter not exc 1 Sqmeach by replacing projected type unserviceable hinges with welding new hinges or welded of existing broken hinges and handles to window frames easing of shutter top proper closing with oiling to hinges and painting at welded portion to match the existing surface complete all as specified and directed 106 Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed. 107 S&F 3mm thick sheet glass ordinary quality and glazing with oil putty& pins/spring pins complete in squares n.exc 0.50 sqm each pane complete all as specified and directed 108 S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed 109 S & F of mild steel work such as window guard bars door frame and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed. 110 S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel heeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete complete all as specified conforming to Fe – 410 W Grade – E 250complete all as specified and directed. 111 S&F Rolled sections as in Purlin ,rafter ,main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate conforming to Fe – 410 W Grade – E 250complete all as specified and directed. 112 M&Lfor preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified. 113 S&F in repairs shower rose 150 mm dia/square of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipecomplete all as specified and directed. 114 S&F stainless steel kitchen plate rack, 1 mm thick of size 900 mm x 780 mm x 222 mm fixed to wall in repairs with brass screws complete all as specified and directed. 115 S&F in repair health faucet with one meter tube and hook complete all as specified and directed 116 S & F in repair 15mm size PVC connections with PTMT nuts of length 450mm and fixed in repairscomplete all as specified and directed. 117 S/Fgrating doom 150 mm size of PTMT (Minimum weight 100 gms)complete all as specified and directed. 118 Taking down CI/PVC/AC soil pipe with fittings from wall, treches of any description including fittings complete all as specified and directed 119 S & F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl fittings and fixtures like bend , elbow,tee etc.complete all as specified and directed. 120 S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl incl fittings and fixtures like bend , elbow,Y(equal or unequal),tee etc.complete all as specified and directed. 121 S&F in repairs 75mm bore for PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing with solvent cement..complete all as specified and directed. 122 S & F fixed in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 123 Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed 124 S&Fmild steel tubular / rectangluar section as in coloumn, posts, raffetrs beams gasset plate andstruts embedding in concrete , and screwing etc complete all as specified and directed. 125 Taking down shutter resecuring, easing and cuttingrefixing in the same openingshutters of any description exc 1 Sqm and not exc 2 Sqmcomplete all as specified and directed. 126 S&F in repair 18/19 mm thick block board, interior grade, veneeredone both sides with decorativechoice lamination & other side balancing white lamination, fixed with screws/nails to timber frame work as in cupbord door/shelves complete all as specified and directed 127 S & F MS Auto hinges of crank 0 degree & 90 degree, fixed with screws to timber frame complete all as specified and as directed. 128 Dismatling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge etc.complete all as specified and directed. 129 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 130 S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. 131 Complete removal of existing water proofing treatment with washing and brushing and removal of all bushes and algaes and after drying surfaceproviding & applying first coat of acrylic polymer based elastomeric water proofingchemical coating and after drying of 1st coat applying fiber mesh and again applying 2nd coat of acrylic polymer based elastomeric water proofing coating application ofboth coat of chemical shouldt be less than 1 kg/Sqm complete all as specified and directed as Engr-in-Charge.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Gujarat View Result →
Uttar Pradesh View Result →
48.
Defence #10706742 Price Bid
Tender For Improvement Of Type-V / 6 Qtr Under Ftr Hq Bsf Gujarat.; 1 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing Of Edges To Give High Gloss Finish Etc. Complete At All Levels.Granite Stone Slab Of Colour Black, Cherry / Ruby Red Area Of Slab Upto 0.50 Sqm 2 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 3 Providing And Fixing Chromium Plated Brass Curtain Rod Having Wall Thickness Of 1.25Mm With Two Chromium Plated Brass Brackets Fixed With C.P. Brass Screws Andpvc Sleeves Etc., Wherever Necessary Complete :20 Mm Dia 4 Providing And Fixing Fiber Glass Reinforced Plastic ( Frp ) Door Frames Of Cross-Section 90 Mm X 45 Mm Having Single Rebate Of 32 Mm X 15 Mm To Receive Shutter Of 30 Mm Thickness. The Laminate Shall Be Moulded With Fire Resistant Grade Unsaturated Polyester Resin And Chopped Mat. Door Frame Laminate Shall Be 2Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fiber Glass From All Sides. M.S. Stay Shall Be Provided At The Bottom To Steady The Frame. 5 Providing And Fixing To Existing Door Frames.30 Mm Thick Glass Fibre Reinforced Plastic ( Frp ) Panelled Door Shutter Of Required Colour And Approved Brand And Manufacture, Made With Fire - Retardant Grade Unsaturated Polyester Resin, Moulded To 3 Mm Thick Frp Laminate For Forming Hollow Rails And Styles, With Wooden Frame And Suitable Blocks Of Seasoned Wood Inside At Required Places For Fixing Of Fittings, Cast Monolithically With 5 Mm Thick Frp Laminate For Panels Conforming To Is: 14856, Including Fixing To Frames. 6 Providing And Fixing Wire Gauge Shutters Using Stainless Steel Grade 304 Wire Gauge With Wire Of Dia 0.5 Mm And Average Width Of Aperture 1.4 Mm In Both Directions For Doors, Windows And Clerestory Windows With Necessary Screws :30 Mm Thick Shutterswith Isi Marked Stainless Steel Butt Hinges Of Required Sizekiln Seasoned And Chemically Treated Hollock Wood 7 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Is: 4454 - Part 1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X1.20 Mm M.S. Laths With 1.20 Mm Thick Top Cover 8 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqmincluding Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 600X600 Mm 9 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix :1:4 ( 1 Cement: 4 Fine Sand ) 10 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Or More Coats On New Work 11 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade :Old Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm ) On Existing Cement Paint Surface 12 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm 13 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete.Flexible Pipe32 Mm Dia 14 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 15 Providing And Fixing Floor Mounted, White Vitreous China Single Piece, Double Traps Syphonic Water Closet Of Approved Brand / Make, Shape, Size And Pattern Including Integrated White Vitreous China Cistern Of Capacity 10 Litres With Dual Flushing System, Including All Fittings And Fixtures With Seat Cover, Cistern Fittings, Nuts, Bolts And Gasket Etc Including Making Connection With The Existing P / S Trap, Complete In All Respect As Per Directions Of Engineer-In-Charge. 16 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions :45 Cm Length15 Mm Nominal Bore 17 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:893115Mm Nominal Bore 18 Providing And Fxing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottomandsideswithrequiredepdmrubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rustfree, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing I Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) :For Fixed Portionanodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15 ) 19 Providing And Fxing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottomandsideswithrequiredepdmrubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rustfree, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing I Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) :For Fixed Portionforshuttersof Doors, Windows&Ventilatorsincluding Providing And Fxing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Anodisedaluminium ( Anodisedtransparentordyedto Required Shade According To Is:1868, Minimum Anodic Coating Of Grade Ac 15 ) 20 Providing And Fixing Drawer 6 Lever Double Lock With Necessary Screws Etc. Complete As Per Directions Of Engineer- In-Charge. 21 Providing And Fixing Chromium Plated Cupboard Handle Of Size 150 Mm To 300 Mmwith Screws Etc. Complete 22 Providing And Fixing Pvc Legs With Necessary Screws Etc. Complete As Per Directions Of Engineer- In-Charge. 23 Providing And Fixing Powder Coated Heavy Duty Telescopic Drawer Channels 450 Mm Long With Necessary Screws Etc. Complete As Per Directions Of Engineerin- In-Charge. 24 Providing And Fixing Wash Basin With 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Cutting And Making Good The Walls Wherever Require: White Vitreous China Table Top Calbart Type Wash Basin Size 550X400x140 Mm With A Single 15 Mm C.P. Brass Pillar Tap, As Pern Direction Of Engineer-In-Charge. 25 Providing And Fixing Cp Brass 600Mm Longtowel Rail With Concealed Fittings Arrangement Of Approved Quality And Colour As Per Direction Of Engineer -In-Charge. 26 Providing And Fixing Cp Brass Trapezoidal Shape Towel Ring With Concealed Fittings Arrangement Of Approved Quality And Colour As Per Direction Of Engineer -In-Charge. 27 Providing And Fixing 10 Mm Thick Frosted Toughened Glass Shelf / Partition With Edges Round Offwith C.P. Brass Brackets Complete Fixed With 40 Mm Long Screws, Rawl Plugs Etc., Complete. 28 Providing And Fixing C.P. Brass Dew 2-Way Bib Cock Single Handle Of Approved Quality Conforming To Is:8931. 15Mm Nominal Bore 29 Providing And Fixing C.P. Brass Health Faucet With Pvc Hose Pipe Of Approved Quality Conforming To Is:8931. 15Mm Nominal Bore 30 Providing And Fixing Pre-Laminated Medium Density Fibre ( Mdf ) Board 18 Mm Thick , With One Side Decorative Lamination Other Side Balancing Lamination Grade-I ( Exterior Grade ) In Shelves, Table Top, Partitiom And All Onther Members Of Workstationwith Adhesive, Screws, Clip, Stainless Steel D Or F Brackets, Clips And All Other Fittings Wherever Required, Edges To Be Sealed With Pvc Edge Bending Tape 2.00 Mm Thick Of Approved Brand ( Fittings Rates Are Included In The Item ) All Complete As Per Direction Of Engineer In Charge. 31 Providing And Fixing Stainless Steel 45 Degree Cabinet Auto Cup Hydraulic Hinges Of Approved Quality & Make With Necessary Screws Etc All Complete.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Gujarat View Result →
49.
Defence #10694376 Price Bid
Tender For Repair And Renovation Of 03 Nos Toilet Blocks ( Bd Unit ) At Nsg Manesar During 2023-24.; 1 Excavating Trenches Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Upto 1.5 M, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, With In Nsg Campus At Designated Place. Nothing Extra Will Be Paid For Any Lead Or Lift With In Nsg Camo. : All Kind Of Soil 2 Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia 3 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 4 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) 5 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 10 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources ) 6 Making Plinth Protection 50 Mm Thick Of Cement Concrete 1:3:6 ( 1 Cement: 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Finishing The Top Smooth. 7 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) . 8 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : 9 Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 10 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete At All Level. 11 Thermo-Mechanically Treated Bars 12 Brick Work Withcommon Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth In: 13 Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 14 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 15 Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 16 Half Brick Masonry With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. 17 Cement Mortar 1:4 ( 1 Cement :4 Coarse Sand ) 18 Brick Edging 7Cm Wide 11.4 Cm Deep To Plinth Protection With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 Including Grouting With Cement Mortar 1:4 ( 1 Cement : 4 Fine Sand ) . 19 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias, Window Jambs, Header, Horizontal, Verticaland Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing Of Edges To Give High Gloss Finish Etc. Complete At All Levels.Granite Stone Slab Of Colour Black, Cherry / Ruby Red 20 Granite Stone Slab Of Colour Black, Cherry / Ruby Red 21 Area Of Slab Upto 0.50 Sqm 22 Area Of Slab Over 0.50 Sqm 23 Extra For Providing Opening Of Required Size & Shape For Wash Basin / Kitchen Sink In Kitchenplatform, Vanity Counter And Similar Location In Marble / Granite / Stone Work, Including Necessaryholes For Pillar Taps Etc. Including Moulding, Rubbing And Polishing Of Cut Edges Etc. Complete. 24 Providing And Fixing Rubbed Stone Slab Table, Edges Rounded And Polished, 75 Cm High 50 Cm Deep And 18Mm Thick, Fixed In Urinal Partitions By Cutting A Chase Of Appropriate Width With Chase Cutter And Embedding The Stone In The Chase With Epoxy Grout Or With Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 6 Mm Nominal Size ) As Per Direction Of Engineer-In-Charge And Finished Smooth. 25 Granite Stone Of Approved Shade 26 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Of Size 300Mm X 600Mm Or More Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 27 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 28 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws 29 Providing And Fixing Is : 12817 Marked Stainless Steel Butt Hinges With Stainless Steel Screws Etc. Complete :100X58x1.90 Mm 30 Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Including Dismantling Of Old Haps And Staple / Sliding Door Bolt If Required Complete : 31 300X16 Mm 32 250X16 Mm 33 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 34 300X10 Mm 35 200X10 Mm 36 Providing And Fixing Aluminium Handles, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 37 125 Mm 38 Providing And Fixing Fiber Glass Reinforced Plastic ( Frp ) Door Frames Of Cross-Section 90 Mm X 45 Mm Having Single Rebate Of 32 Mm X 15 Mm To Receive Shutter Of 30 Mm Thickness. The Laminate Shall Be Moulded With Fire Resistant Grade Unsaturated Polyester Resin And Chopped Mat. Door Frame Laminate Shall Be 2Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fiber Glass From All Sides. M.S. Stay Shall Be Provided At The Bottom To Steady The Frame. 39 Providing And Fixing To Existing Door Frames. 40 30 Mm Thick Fiberglass Reinforced Plastic ( F.R.P. ) Flush Door Shutter In Different Plain And Wood Finish Made With Fire Retardant Grade Unsaturated Polyester Resin, Moulded To 3 Mm Thick Frp Laminate All Around, With Suitable Wooden Blocks Inside At Required Places For Fixing Of Fittings And Polyurethane Foam ( Puf ) / Polystyrene Foam To Be Used As Filler Material Throughout The Hollow Panel, Casted Monolithically With Testing Parameters Of F.R.P. Laminate Conforming To Table - 3 Of Is: 14856, Complete As Per Direction Of Engineer-In-Charge. 41 Providing And Laying Vitrified Tiles In Floor In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) Jointing With Grey Cement Slurry @3.3 Kg / Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily. 42 Glazed Vitrified Tiles Matt / Antiskid Finish Of Size 43 Size Of Tile 600 X 600 Mm 44 Providing And Laying Polished Granite Stone Flooring / Door Sillin Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. 45 Polished Granite Stone Slab Colour Of Jetblack, Cherry / Ruby Red Or Equivalent 46 Providing And Fixing On Unplasticised - Pvc Moulded Fittings / Accessories For Unplasticised Rigid Pvc Sewer Pipes Conforming To Is : 13592 Type B, Including Jointing With Adhesive. 47 Coupler A ) 110 Mm 48 Single Tee With Door A ) 110X110x110 Mm 49 Single Tee Without Door A ) 110X110x110 Mm 50 Bend 87.5° A ) 110 Mm Bend 51 12 Mm Cement Plaster Of Mix : ( Including Height Up To 10 Meters ) 52 1:6 ( 1 Cement: 6 Coarse Sand ) 53 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : ( Including Height Up To 10 Meters ) 54 1:6 ( 1 Cement: 6 Coarse Sand ) 55 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicon Additive Of Required Shade : ( Including Height Up To 10 Meters ) 56 New Work ( Two Or More Coat Applied @ 1.43 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) 57 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : ( Including Height Up To 10 Meters ) 58 Two Or More Coats On New Work 59 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. ( Including Height Up To 10 Meters ) 60 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : ( Including Height Up To 10 Meters ) 61 One Or More Coats On Old Work 62 Finishing Walls With Primium Acrylic Smooth Exterior Paint With Silicon Additives Of Required Shade : ( Including Height Up To 10 Meters ) 63 Old Work ( One Or More Coat Applied @ 0.83 Ltr / 10 Sqm ) . 64 Cleaning Of Chocked Sewer Line By Diesel Running Vehicle Mounting Hydraulic Operated High Pressure Suction Cum Jetting Sewer Cleaning Machine Fitted With Pump Having 4000 Litres Suction Capacity And 6000 Litres Water Jetting Tank Capacity Including Skilled Operator, Supervising Engineer Etc. For Cleaning And Partial Desilting Of Manholes And Dechocking Of Sewer Lines. Dechocking And Flushing Of Sewer Line From One Manhole To Another By High Pressure Jetting System Of 2200 Psi For Sewer Line From 150Mm Dia Upto 300Mm 65 Providing & Fixing White Vitreous China Water Closet Squatting Pan ( Indian Type ) Along With S Or P Trap Including Dismantling Of Old Wc Seat And S Or P Trap At Site Complete With All Operations Including All Necessary Materials, Labour And Disposal Of Dismantled Material I / C Malba, All Complete As Per The Direction Of Engineer-In Charge. 66 Orissa Pattern W.C Pan Of Size 580X440 Mm 67 Dismantling W.C. Pan Of All Sizes Including Disposal Of Dismantled Materials I / C Malba All Complete As Per Directions Of Engineer-InCharge 68 Dismantling 15 To 40 Mm Dia G.I. Pipe Including Stacking Of Dismantled Pipes ( Within 50 Metres Lead ) As Per Direction Of Engineerin- Charge. ( A ) Internal Work- Exposed On Wall 69 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge. 70 Nominal Concrete 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) 71 Taking Out / Dismantling Doors, Windows And Clerestory Window Shutters ( Steel Or Wood ) With Or Without Chowkhats Includingstacking Within 50 Metres Lead : 72 Of Area 3 Sq. Metres And Below 73 Dismantling Tile Work In Floors And Roofslaid In Cement Mortar Or Top Cement Mortar Layer Of Coba Treatment Including Stacking Material Within 50 Metres Lead. 74 For Thickness Of Tiles 10 Mm To 25 Mm 75 Dismantling Of Flushing Cistern Of All Types ( C.I. / Pvc / Vitrious China ) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials Within 50 Metres Lead. 76 Dismantling Old Plaster Or Skirting / Wall Tile Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 77 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors, Dismantling Of Old European Type W.C. Pan Wherever Required : 78 W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 79 Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete. 80 10 Litre Capacity - White 81 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. 82 Semi Rigid Pipe 83 32 Mm Dia 84 Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I / C Making Good The Walls Etc. Concealed Pipe, Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall : 20 Mm Dia Nominal Bore 85 Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. 86 20 Mm Dia Nominal Bore 87 25 Mm Dia Nominal Bore 88 Making Connection Of G.I. Distribution Branch With G.I. Main Of Following Sizes By Providing And Fixing Tee, Including Cutting And Threading The Pipe Etc. Complete : 89 25 To 40 Mm Nominal Bore 90 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) : 91 25 Mm Nominal Bore 92 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions : 93 45 Cm Length 94 15 Mm Nominal Bore 95 Providing And Fixing C.P. Brass Shower Rose With 15 Or 20 Mm Inlet : 96 150 Mm Diameter 97 Painting G.I. Pipes And Fittings With Two Coats Of Anti-Corrosive Bitumastic Paint Of Approved Quality : 98 20 Mm Diameter Pipe 99 25 Mm Diameter Pipe 100 Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) : 101 20 Mm Nominal Bore 102 25 Mm Nominal Bore 103 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 104 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. 105 15 Mm Nominal Bore 106 Providing And Fixing C.P. Brass Stop Cock ( Concealed ) Of Standard Design And Of Approved Make Conforming To Is:8931. A ) 15 Mm Nominal Bore 107 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 A ) 15 Mm Nominal Bore 108 15Mm Nominal Bore 109 Providing And Fixing C.P. Brass Extension Nipple ( Size 15Mmx50mm ) Of Approved Make And Quality As Per Direction Of Engineer-In-Charge. 110 Providing And Fixing Ptmt Ball Cock Of Approved Quality, Colour And Make Complete With Epoxy Coated Aluminium Rod With L.P. / H.P.H.D. Plastic Ball. 111 20 Mm Nominal Bore, 120 Mm Long, Weighing Not Less Than 198 Gms 112 Providing And Fixing Gi / Ptmt Extension Nipple For Water Tank Pipe, Fittings Of Approved Quality And Colour. 20 Mm Nominal Bore, Weighing Not Less Than 40 Gms 113 Providing And Fixing Square-Mouth S.W. Gully Trap Class Sp-1 Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size ( Inside ) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design: 114 100X100 Mm Size P Type 115 With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 116 Providing And Laying Non-Pressure Np2 Class ( Light Duty ) R.C.C. Pipes With Collars Jointed With Stiff Mixture Of Cement Mortar In The Proportion Of 1:2 ( 1 Cement : 2 Fine Sand ) Including Testing Of Joints 117 300 Mm Dia. R.C.C. Pipe 118 Constructing Brick Masonry Manhole In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) With R.C.C. Top Slab With 1:1.5:3 Mix ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) , Foundation Concrete 1:4:8 Mix ( 1 Cement : 4 Coarse Sand ( Zone-Iii ) : 8 Graded Stone Aggregate 40 Mm Nominal Size ) , Inside Plastering 12 Mm Thick With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : 119 Inside Size 90X80 Cm And 45 Cm Deep Including C.I. Cover With Frame ( Light Duty ) 455X610 Mm Internal Dimensions, Total Weight Of Cover And Frame To Be Not Less Than 38 Kg ( Weight Of Cover 23 Kg And Weight Of Frame 15 Kg ) : 120 With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 121 Extra For Depth For Manholes :Size 90X80 Cm With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 122 Providing And Fixing In Position Pre-Cast R.C.C. Manhole Cover And Frame Of Required Shape And Approved Qualityl D- 2.5Rectangular Shape 600X450 Mm Internal Dimensions 123 Making Connection Of Drain Or Sewer Line With Existing Manhole Including Breaking Into And Making Good The Walls, Floors With Cement Concrete 1:2:4 Mix ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Cement Plastered On Both Sides With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Finished With A Floating Coat Of Neat Cement And Making Necessary Channels For The Drain Etc. Complete : 124 For Pipes 100 To 450 Mm Diameter 125 Raising Manhole Cover And Frame Slab To Required Level Including Dismantling Existing Slab And Making Good The Damage As Required ( Raising Depth Of Manhole To Be Paid Separately ) :Rectangular Manhole 90X80 Cm With Rectangular Cover 600 X 450 Mm Of Grade Ld - 2.5 126 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fastenersto Be Paid For Separately ) : 127 For Fixed Portion 128 Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 129 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) 130 Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 131 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : 132 With Float Glass Panes Of 5 Mm Thickness ( Weight Not Less Than 12.50 Kg / Sqm ) 133 Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : ( A ) First Layer Of Slurry Of Cement @ 0.488 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. ( B ) Second Layer Of Slurry Of Cement @ 0.242 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. 134 Providing And Applying White Cement Based Putty Of Average Thickness 0.5 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 135 Providing And Laying Autoclaved Aerated Cement Blocks Masonry With 150Mm / 230Mm / 300 Mm Thick Aac Blocks In Super Structure Above Plinth Level Up To Floor V Level With Filling Joint With Cement Mortar ( 1 Cement :4 Coarse Sand ) All Complete As Per Direction Of Engineer-In-Charge. 136 Dismantling C.I. Pipes Including Excavation And Refilling Trenches After Taking Out The Pipes, Manually / By Mechanicalincluding Stacking Of Pipes & Lead At Site Within 50 Metre Lead As Per Direction Of Engineer-In-Charge: 137 Up To 150 Mm Diameter 138 Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350 Mm Withspreaders ( C.P. Brass ) With Waste Fitting As Per Is : 2556, With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittings And Cutting And Making Good The Walls Floors Wherever Required : 139 Single Half Stall Urinal 140 Providing And Fixing Cp Grating Of Approved Quality Circular Type, 110 Mm Dia, With Or Without25 Mm Waste Hole 141 Providing And Fixing Table Top Wash Basin [ Cera Calburt Or Equivalent ] Of Size 550 Mm X 400 Mm Snow White Table Top Basin With 15 Mm C.P. Brass Pillar Taps [ Equivalant To Cat No 9302 ( Prayag Make ) , Cera F1015101 Steel Pillar Cock, Silver, Steel Finish Or Equivalent ] , 32 Mm C.P. Brass Waste Of As Per Approved Make Of Selection Including Fittings And Waste Pipe Etc. And Fixing On Wash Basin Counter By Tile Adhesive Of Approved Make. 142 Providing And Laying Unplasticised Rigid Pvc Sewer Pipe Wih Min. Pressure 6 Kg / Sqcm Conforming To Is : 13592 , Type B Including Jointing With Adhesive ( I ) Plain Socketed Pipes. ( Including All Heights Up To 10 Meter ) 143 110 Mm Diameter 144 Providing And Fixing On Unplasticised - Pvc Moulded Fittings / Accessories For Unplasticised Rigid Pvc Sewer Pipes Conforming To Is : 13592 Type B, Including Jointing With Adhesive. 145 110 Mm P Trap 146 Providing And Fixing 1200 Mm X 750 Mmmirror With Plastic Moulded Frame Havingglass Thickness Not Less Then 5Mm Thick Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 147 Providing And Fixing C.P Brass Health Faucet As Per Approved Design And Make And All Fitting Etc Complete, Including Cost Of Cutting And Making Good The Walls And Floors As Per Direction Of Engineering In Charge. 148 Providing And Fixing C.P. Brass Pressmatic Valve Hindware Or Equivalent Approved Quality Conforming To Is Standards 149 15Mm Nominal Bore 150 Excavating / Demolishing Of Malba / Foam Concrete / Lean Mix And Refillingin Sunken Portion Of Toilet As Per Direction Of Engineering-In-Charge 151 Providing And Fixing 600 Mm Long Cp Brass Towel Rail Completefixed To Wooden Cleats Withscrews Of Approved Quality As Per Direction Of Engineer In Charge. 152 Providing And Fixing Gi Pipe Clamp For Pvc Rain Pipes Of Diameter : A ) 110 Mm 153 Providing And Fixingss Cloth Hanger With 06 Hookcompletefixed Withscrews Of Approved Quality As Per Direction Of Engineer In Charge. 154 Credit For Dismantled Material Received From Site Of Work Which Will Be Handed Over To Contractor As Per Direction Of Engineer-In-Charge.Dismantled Old Wood 155 Credit For Dismantled Material Received From Site Of Work Which Will Be Handed Over To Contractor As Per Direction Of Engineer-In-Charge.Dismantled Old Steel 156 Credit For Dismantled Material Received From Site Of Work Which Will Be Handed Over To Contractor As Per Direction Of Engineer-In-Charge.Dismantled Old Pvc 157 Electrical 158 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. 159 Group B 160 Rewiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable And 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable As Earth Wire In Existing Surface / Recessed Steel / Pvc Conduit Including Dismantling As Required. 161 Group B 162 Wiring For Group Controlled ( Looped ) Light Point / Fan Point / Exhaust Fan Point / Call Bell Point ( Without Independent Switch Etc. ) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. 163 Group B 164 Wiring For Light / Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit Alongwith 1 No. 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. 165 Wiring For Light / Power Plug With 4X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Pvc Conduit Alongwith 2 Nos 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. 166 Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required. 167 2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire 168 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 169 3 X4 Sq.Mm 170 6 X4 Sq.Mm 171 3 X 1.5 Sq.Mm 172 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. 173 20 Mm 174 Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 175 5 / 6 Amp Switch 176 Supplying And Fixing Following Size / Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required. 177 1 Or 2 Module ( 75Mmx75mm ) 178 3 Module ( 100Mmx75mm ) 179 12 Module ( 200Mmx150mm ) 180 Supplying & Fixing Suitable Size Gi Box Wih Modular Plate And Cover In Front On Surface Or In Recess Including Providing And Fixing 25 A Modular Socket Outlet And 25 A Modular Sp Mcb, C Curve Including Connections, Painting Etc. As Required. ( For Geyser / Ac ) 181 Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. 182 Providing And Fixing A Metallic Louvred Shutter Suitable For Following Sizes Exhaust Fan, The Louvres Should Be Able To Open When The Fan Is On And Close When The Fan Is Turned Off, On The Existing Opening On The Wall, Etc., As Required. 183 300 Mm 184 Providing And Fixing 3 Mm Thick Pvc / Phenolic Laminatedround Sheet Cover With A Minimum Of 170 Mm Dia On The Existing Fan Box With Two Screws, Etc., As Required. 185 Providing And Fixing 3 Mm Thick Pvc / Phenolic Laminatedround Sheet Cover On The Existing Junction Boxwith Two Screws, Etc., As Required. 186 Supplying And Fixingprcd Plug Top, 16 A 30 Ma Rating Including Connection Etc. As Required. 187 Supplying And Fixing 3 Pin, 5 A Ceiling Rose On The Existing Junction Box / Wooden Block Including Connections Etc. As Required. 188 Supplying And Installation Of 300 Mm Sweep, 1400 Rpm Heavy-Duty, Single Phase, Metallic Exhaust Fan Conforming To Is:2312 -1967In The Existing Opening, Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. ( Havellsturbo Force Heavy Duty Exhaust Fan Or With Similar Specifications C&G / Orient / Usha / Almonard ) 189 300 Mm Sweep 190 Cutting Holes Of Required Size In Brick Masonry Wall For Fixing Of Exhaust Fan Including Providing And Fixing 300 Mm Dia Pvc Pipe And Making Good The Same Etc. Complete As Per Direction Of Engineer-In-Charge. 191 Supply, Installation, Testing And Commissioning Of Surface Mountedled Downlighter Luminaire Inmetallic Housing, With A Minimum System Lumen Output Of 1500 Lumen Andwith A Minimum System Luminous Efficacy Of 100 Lm / W, Average Led Life L70b50: 50000 Hours, Suitable For Operation On 140-270V, 1F, 50Hz Ac Supply System, Complete With All Accessories, Diffuser And Electronic Driver, Directly On Ceiling, Including Connections And Earthing Etc. As Required. 192 Supply, Installation, Testing, And Commissioning Of Integrated Led Batten Luminaire, 600 Mm ( Nominal Size ) With A Minimum System Lumen Output Of 1000 Lumen Andwith A Minimum System Luminous Efficacy Of 100 Lm / W, Made Of Aluminium Housing Having A Colour Temperature5500k - 6500 K, Average Life L70b50: 50000 Hours, Suitable For Operation On 140-270V, 1F, 50Hz Ac Supply System, Complete With All Accessories, Electronic Driver, Diffuser, Directly On The Ceiling / Wall, Including Connections, Earthing, Etc. As Required. 193 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing Andcommissioning Etc. As Required. 194 Single Pole 195 Supplying And Fixing Single Pole Blanking Plate In The Existing Mcb Db Complete Etc. As Required. 196 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) ( Note : Db Should Be Suitable For Rccb / Rcbo As Incomer. ) 197 12 Way , Double Door 198 Supplying And Fixing Cable End Box ( Loose Wire Box ) Suitable For Following Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface / Recess, Complete With Testing And Commissioning Etc. As Required 199 For 10 / 12 Way, Double Door Spn Mcbdb 200 Supplying And Fixing Following Rating, 240 / 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required 201 40 A Double Pole 202 Dismantling Of The Existing Switch Accessories Like Switches, Sockets, And Mcbs, Etc., As Required. 203 Dismantling Of The Existing Ceiling Rose, Holder, And Wall Bracket And Depositing The Same With The Listing Of Materials In The Store. 204 Dismantling Of Existing Fluorescent Fitting From Ceiling / Wall Including Making Good The Damage To Match The Adjacent Surface, Etc., As Required. 205 Dismantling Of The Existing Ceiling Fan / Exhaust Fan Of Any Size Installed In The Building And Depositing It In The Mmc Store. 206 Dismantling Of The Existing Recessed Spn Mcb Distribution Board Of Any Size Along With Mcbs And Other Accessories, Including Making Good The Damage To Match The Adjacent Surface, Etc., As Required. 207 Dismantling Of The Existing Recessed Switch Board Of Light Points / Power Points, Power / Light Plug Points / Socket Outlet Metal Boxes Of Any Size, Along With Phenolic Laminated Sheet, Switches, Sockets, Etc., Making Good The Damage To Match The Adjacent Surface, Etc., As Required. 208 Dismantling Wires From The Following Sizes, Existing Circuit / Submain / Power Wiring Conduits, Complete As Required. The Length Of The Conduit From Which The Wires Are Removed Will Be Measured For Payment Purposes, Irrespective Of The Number Of Wires In It.Above 25 Mm Conduits. 209 Dismantling Wires From The Following Sizes, Existing Circuit / Submain / Power Wiring Conduits, Complete As Required. The Length Of The Conduit From Which The Wires Are Removed Will Be Measured For Payment Purposes, Irrespective Of The Number Of Wires In It.Up To 25 Mm Conduit. 210 Less Credit For The Unserviciable Items Dismantled Items During Execution Of The Work. 211 Assorted Mcb Tp And Tp&N & Other Switchgear 212 Assorted Piano Type Switches 213 Assorted Piano Type Sockets 214 Assorted Brass Batten / Angle Holder / Brass Bracket 215 Assorted Exhaust Fan 300 / 380 / 450 216 Less Credit For The Dismantled Copper Wirewires From Light Points / Circuit / Submain / Power Circuit Wiring, . 217 Less Credit For The Dismantled Aluminium Wirewires From Light Points / Circuit / Submain / Power Circuit Wiring, . 218 Assorted Metal Switch Box. 219 Assorted Mcb Db Spn With Out Mcbs 220 Assorted Mcb Sp 221 Assorted Mcb Dp 222 Add 1.0633 Multiplying Factor For Gst On Dsr
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Haryana View Result →
50.
Rural Development #10673380 Price Bid
Providing Partition , Door Shutters And Storage Units For Gram Panchayat Building At Vanasgaon 2 ) Poviding Tables And Chairs For Gram Panchayat Building At Vanasgaon Tal Niphad , material , ply 18mm , ply 12mm , ply 9mm , decorative sheet , paperbase d laminate , wood saw 2 . 5in x 10mm , wood saw 2 in x 10mm , wood saw 1 . 5in x 10mm , wood saw 3in x 10mm , wood saw 1in x 10mm , drawer channel 18in , drawer channel 22in , drawer lock , ss handle 96mm , hingess 3x3/4x3/4 , hingess 4x3/4x3/4 , hingess 5x3x3 , magnet , cylinrical lock , wood saw 15x15 , glass 12mm , door kit , wood adesive , ss screw 100x10 , ss screw 75x10 , ss screw 25x6 , ss screw 19x6 , masking tape , wire nails , revolving chair , chairs , public chairs
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
TenderDetail
Loading tenders