View Bid Results For Data Back Up Tenders

We found 1138 Bid Results related to data back up tenders. You can find Contractor details who won data back up tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–23 of 1138 tenders matching your filters

Power #11498531 AOC

Supply, Installation, Testing And Commissioning Of Ups Batteries With Buy Back Scheme For Data Centre, Chennai And Disaster Recovery Centre, Madurai. , Supply,Installation, Testing And Commissioning Of 204 Nos.Of 2V/600Ah Battery For160kva Ups With Rack For Dc, Chennai With Buyback Facility , Supply,Installation, Testing And Commissioning Of 204 Nos. Of 2V/600Ah Battery For160kva Ups With Rack For Drc, Madurai With Buyback Facility , Supply,Installation, Testing And Commissioning Of 34 Nos.Of 12V/120Ah Battery For 60Kva Upswithout Rack For Dc,Chennai With Buyback Facility

Contract Date: Jul 06, 2026 Contract Value : ₹ 42.46 Lakh

Boards / Undertakings / PSU No of Bidders 2

Tamil Nadu View Result →

Civil Aviation #11458391 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Kerala View Result →

Health and Family Welfare #11458390 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 5

Kerala View Result →

Defence #11453177 AOC

Bids Are invited for Ceiling Speakers , Column Array Speakers , Lifier For Ceiling Speakers , Lifier For Column Array Speakers , Digital Signal Processor , Boundary Layer Microphones , On Off Button For Boundary Layer Microphones , Switch Box For Boundary Layer Microphones , Ceiling Tile Microphone Array , Main Display , Side Display , Annotation Panel , Cable Manager For Table , Hdmi Switcher , Hdmi Splitter , Hdmi Extender , Usb Tx Multiformat Switcher , Usb Rx Multi Format Switcher , Usb Data Matrix Switch , Ptz Camera , Speaker Tracking Camera , Hdmi To Usb Capture Card , Voice Tracking Device , Control System With Touch Controller , Network Switch , Room Scheduler , Pdu With Humidity And Temperature Sensor , Ceiling Mount Document Scanner , Equipment Rack , Ups 10 Kva Ups With 60 Min Backup , Ups 3 Kva Ups With 60 Min Back Up , Acoustic Door With Fitting Laminate And Door Frame , Chair , Hot And Cold Ac 2 Ton , Room Air Purifier , Bio Metric Door Access Control , Auto Fire Suppression System For Av Rack , High Quality Wireless Keyboard And Mouse , Led Surface Recessed Mounted Panel With Luminous Web , 12 Channel Signal Dimmer Controller , 12 Channel Controller , Display Keypad Panel For Workstations , Network Router For Automation System , Sitc Supply Installation Testing And Commissioning , Acoustic Wall Paneling , Acoustic False Ceiling , Wooden Conference Table , Executive Chair , Acoustic Carpet Flooring , Power Supply For Lighting Control Network , Lighting Control Communicaiton Gateway Total Quantity : 4070

Contract Date: Ref. Documents Contract Value : ₹ 3.84 Crore

Government Departments No of Bidders 4

Rajasthan View Result →

Power #11440492 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 2

Andhra Pradesh View Result →

Health and Family Welfare #11430568 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 7

Rajasthan View Result →

Defence #11421636 AOC

Bids Are invited for It Hw Boq1 Offline Ups 1 Kva - Input Voltage Range 140 Volt To 300Vac And Output 230Vac Battery Type Sealed Maintenance Free Charging Time 6 To 8 Hrs Back Up 20 To 30 Minute , Projector 3300 Lumens Alongwith Smart Screen 75 Inch - Resolution Xga 1024 X 768 Light Source L Zoom 1 To 2 X White Light Output 3300 Lumens , Touch Screen Info Display Kiosk Screen Size 17 Inch - Processor Intel Core I5 Ram 8 Gb Ssd Storage 128 Gb Display Lcd Os Window 11 Pro With License Key , Hvy Duty Black And White Inkjet Mono Printer Fs And A4 - Speed 13 Ipm Connectivity Usb Data Range 10M And 100 Mbps Duty Cycle 15000 Per Month Paper Size A4 And A5 Resolution 600 To 1200 Dpi , Heavy Duty Scanner A4 And Fs Rear Tray Feed - Type Document Connectivity Usb Resolution 1200 Std Sheet Capacity 50 Scanning Both Side Speed 35 Ppm And 70Ipm Total Quantity : 7

Contract Date: Ref. Documents Contract Value : ₹ 5.99 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 4

Jammu and Kashmir View Result →

Educational and Research Institute #11403991 AOC

Contract Date: Jun 27, 2026 Contract Value : ₹ 4.95 Lakh

Local Bodies No of Bidders 5

Kerala View Result →

Railways #11331869 AOC

Supply Of gps tracker , supply of gps tracker with sim (airtel). specifications and information data (i) technology gs m/gprs gps, ( i) receiver 33 channel tracking sensitivity -165 dbm. (iii)position accuracy- <2.5 cep. (iv) ve locity accuracy -<0.1m/s (within +/- 15% error) (v) hot start < 1 s warm start < 25 s cold start <35 s (vi) c ellular technology gsm 2g bands quad-band 850/900/1800/1900 mhz data transfer gprs multi-slot class 12 (up to 240 kbps), gprs mobile station class b data support sms (text/data) power input voltage range 6 - 30 v dc with overvoltage protection (vii) back-up battery 170 mah li-lon battery (0.63wh) (viii) bluetooth specification 4.0 + le supported peripherals temperature and humidity sensor, headset, obdii dongle, ina teck barcode scanner, universal ble sensors support. (ix) physical specification dimensions 79 x 43 x 12 m m (l x w x h) weight 54 g. given in this document are subject to change by teltonika without prior notice. (x) interface digital inputs 1 digital outputs 1 analog inputs 1 gnss antenna internal high gain cellular ant enna. (xi)internal high gain usb 2.0 micro usb, led indication 2 status led lights, sim micro-sim memory 1 28mb internal flash memory operating (without battery) -40 degree centigrade to +85 degree centigrade storage (xii) protection rating ip54 battery charge temperature 0 degree centigrade to +45 degree centig rade battery discharge temperature -20 degree centigrade to +60 degree centigrade battery storage tem perature -20 degree centigrade to +35 degree centigrade (xiii) ultra deep sleep configuration and firmwar e update fota web, (usb, bluetooth), (xiv) fmbt mobile application (configuration) sms configuration, ev ents, dout control, debug gprs commands configuration, digital input 1, accelerometer, external power v oltage, engine rpm (obdii dongle). make: teltonika or similar, model: fmb 920 or similar . [ warranty per iod: 30 months after the date of delivery ] ]

Contract Date: Jun 23, 2026 Contract Value : ₹ 2.03 Lakh

Government Departments No of Bidders 1

West Bengal View Result →

10.

Youth Affairs and Sports and Culture #11323145 Technical Bid

Tender For Purchase Of Biomechanical Equipments , Nord Board , It Should Be Portable And Should Have 2 Load Cell Sensors Per Unit With Easy To Attach Hooks Pivoting 360 Degrees Joint Improving Sensor Accuracy It Should Have Knee Position Indicator For Replication Of Test Position In Each Time. Should Have Sample Rate Per Sensor: Upto 400Hz, Capacity Per Sensor: 100 Kg/980-1000N Safe Over Load Per Sensor: 150Kg/1500N, Max Over Load Per Sensor: 200Kg/ 2000N, Resolution: 1N And Sensitivity: 22.0+/-Mv/V. Should Have Rechargeable Battery & Battery Life Should Be100 Active Hours Approx. Should Have Working Temperature Range 5-40®C. (All Weather Proof) Latest Upgradable Software Should Have Both Wired & Wireless Connectivity Connectivity Through Usb (Wired) Bluetooth Low Energy (Ble) For Ipad & Iphone I.E. (Wireless Connectivity) Should Provide 4 Years Warranty On Hardware, Should Be Provided With Latest Upgradable Software And Free Software Updates. Should Have Software Available In Mobile & Laptop (Desktop) Application With Cloud Analytics Platform Applications. Should Have Ability To Collect Data Both Local I.E. Laptop And On Ios Devices. Local Software:- For Data Collection & Data Analysis Locally. Cloud Software:- For Athlete Data Management And Analysis. Local (Desktop /Laptop) Software Should Be Compatible With Windows 10 Desktop Application Ios 13 Or Later Application (Ipad & Iphone). Should Have Ability To Collect Data Of Over 10000 Athletes Or More To Choose With Simple Name Search / Grouping Them. Cloud Analytics Platform For Analysis. Software (Application) Must Give Real Time Feedback Of Testing. License Must Be Valid For 4Years. Cloud Software: - Should Automatically Sync All Data Collected On Local Mobile And Laptop Application When Connected To Internet. O Should Have A Dashboard To See Overview Of Organizations Athletes Data And Different Tiles (Data Indicators) To See Athletes Within And Outside Threshold Zones. Report Section:- Should Have Port Section To Able To Compare Different Groups/Athletes On Longitudinal Data. Should Have Ability To Compare Same Athletes Data Over The Period. Athletes Profile:- Should Have Functionality To Enter Anthropometry (I.E. Upper Body & Lower Body Measurement). Athletes Profile Should Be Auto Sync To Local Application And Flexibility To Move Across Different Groups Or Teams With In Organization And Functionality To Pick Any Athlete From Large Pool (1000 Or More Athlete). • Should Be Able To Setup Different Access To Different People I.E. To Physiotherapist, Sports Scientist And S&C Trainer Within The Organization To Secure Data Access. Api Integration:- Should Have Open-Source Api Code For Integration Into Athlete Management System To Integrate In Ams System. Should Have Software License Valid For 4Years. Wi-Fi Tablet 64Gb, Space Grey-1Year Warranty (As Provided By Oem) - Service By Customer Service Of Oem Only.Hsn:8471. Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. , Electromyography (Open) , The System Should Be Supplied With Minimum 16 High Speed Wireless Emg Channel With Built In Imu Sensor. Should Have Analog+ Digital Base Station • Should Have Analogy Output Option To Facilitate Integration With Third Party Hardware And Software Sensor Should Have Fixed Inter Sensor Delay Of 0.5 Milliseconds Or Less Sensors Should Have Fixed Spacing Between Electrodes Preferably Less Than 15 Mm To Avoid Motion Artifacts And Cross-Talk Sensor Contacts Should Be Made Up Of A Metal For Better Contact And Better-Quality Signal Should Be Supplied With A Charging/Transmitting Station That Communicates With Sensors To Get Information On Their Charging, Recording And Signal Strength Sensors, Sensor Skin Interface, Cable, Power Adapter And Accessories Sensors Facilitate Emg And Imu Measurements Emg Data Analysis Software For Stand-Alone Usage With Live Recording Of At Least 32 Channels And Analysis For Both Online And Offline Modes. Trigger Module Package Analog Adapter With Cable For Dynamometer Integration. • Should Have Option For Real Time Data Streaming To Computational Softwares Such As Mat Lab. Mobile Emg Suite For Outdoor Applications Technical Support For The Lifetime Or At Least For A Period Of 05 Years. The System Should Be Supplied With Sensor Docking Unit And Charging System The System Should Be Supplied With Double Sided Adhesive Stickers (At Least 5000) And Double-Sided Adhesive Tape Rolls (At Least 20). The System Should Be Supplied With At Least 2000 Hz Of Sampling Rate Or More Per Sensor. The System Should Have A Baseline Noise < 1 ?V Or Better. The Emg System Should Have +20,000 ? Vemg Input Range Or Better. The System Should Have Software Controlled Digital Filtering, The System Should Have Shielded Cables For Minimal Artifact. The Software Should Allow Video Recording During Emg Data Recording Should Have At Least 8 Hours Of Battery Backup • Should Have Wireless Working Range Of At Least 40M Or More To Capture Data During Various Sport Specific Movements, Should Be Configurable To 32 Channels In Future. The Emg System Should Be Integrated With 3D Motion Analysis, Force Plate, Isokinetic Dynamometer, Instrumented Treadmill, Imu, Eye Tracking, Video Analysis Etc. The Necessary Third-Party Hardware/ Software Should Be Supplied By The Seller For Integration Of Emg With Other Systems. Laptop I7 (Latest Generation) With 32Gb Ram Or More, 2Tb Ssd, At Least 15.6-Inch Screen And Laser Printer With Copy/Scan/Print To Generate And View Report And Additionally A 32-Inch Monitor For Dual Display. Usfda, Iso & Euiec Certificates Or Equivalent. Installation At The Institute And Training To The Users By Experts Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. , Timing Gates (Open) , It Should Be A Wireless Speed Gate With 12 Gates And Provision For Increasing Gates Up To 15 Gates/Splits Or More With Split Distance Fully Customizable To Perform Variety Of Testing (Can Have Splits At 1 Meter Or 10 Meters Or Customized Distance). It Should Be Photocell & Reflector System Only (Light Or Laser Based) Considering Flexibility It Offers To Use Variety Of Testing Protocols With Visual Cue (Light System Provide A Cue To The Athlete To Change Direction) I.E. Single Or Dual Feedback Functions For Athletes. It Should Have An Accuracy Of Minimum 1 Hundredth Of A Second (1/1000Th Of A Second) Or Beyond, With A System To Eliminate Errors Caused By Hands, Feet And Other Body Parts, Equipment (To Provide Most Accurate Data) Must Have Error Correction Processing (Ecp) Inside The Timing Unit. Wireless Range: - Should Be Able To Control Gates Wirelessly With A Range Up To 180-200 Meters. It Should Have Functionalities To Provide 6 Options When Using Different Accessories A. Auto Beam Break B. In-Beam C. Reactive D. Start Pad E. Vibration (Reaction Time Measures) F. Rfid Various Accessories Should Be Integrated With Timing Gates Thus Providing Various Testing Possibilities Of Athletes. It Should Integrate With A Jump Mat (Accessories) For Plyometric Training And Explosive Power Measurement With Multiple Jump Testing Option On Jump Mats. Tests & Drills To Be Measured System Must Be Able To Measure- I. Linear (Straight Line Sprints), Shuttles With Customized Split Distance. Ii. Yoyo, Beep Tests (With Custom Customized Time Interval For Endurance Testing) Iii. Planned, Unplanned Change Of Direction For Agility Testing. Iv. Multiple Reactive Movements. V. Reaction Time Measure For Starting Blocks Any Customized Tests/ Drill With All 6 Or More Gates And No Restrictions On Number Of Customized Drills To Provide More Flexibility In Testing. • Mobile/Tablet Applications & Web Application: I. System Should Be Controlled By And Operated By Tablet/Laptop/Smartphone (Mobile Applications: -Should Have Both Ios & Android Mandatory Considering Large Android Phone User Base In India Along With Ios Application) And Ii. Must Have A Cloud Web Application Platform For Tracking Performance Variables Of 1000 Or More Athletes At One Go For Various Testing. Utility Of Mobile Applications: - I. Flexibility To Perform Test: -Mobile/Tablet Applications Should Have Functionality To - A. Pick Any Athlete From Large Pool (1000 Or More Athlete) B. Pick Any Drill Or Test To Be Conducted And Ability To Customize A Test With All 4 Or More Gates. C. To Visually Display Gates On Mobile Screen To Understand How To Perform A Test/Drill. Application To Automatically Detect Setup Of Gates. Ii. It Should Provide Real Time Data Of Performance, Reaction Time, Speed, And Agility. Iii.Single Or Multiple User With Authorized Access Control- Only Authorized Single Or Multiple Users Admins Should Have Access To Operate Application For Data Security And Data Access. Should Automatically Send Data To The Cloud Application Once Connected To Internet. Software License To Be Valid For 3 Years. Utility Of Web Application: - Functionality Of Web Application: - I. Automatically Populate Data Collected By Mobile Applications. Ii. Should Be Able To Compare Single Athlete Data Historically From Different Trials Or Compare Various Athletes For A Test Or A Drill Over Any Time Period. Iii. Should Be Able To Manage Athletes (By Creating Sports Specific Teams) Iv. Should Be Able To Download Data In Pdf, Excel And Ability To Customize These Reports V. Software License To Be Valid For 3 Years. Integration With 3Rd Party Ams System: -Software Should Have Functionality To Integrate Ams In Near Future Automatically, A Software Must Have Api Available For Seam Less Integration Of All/ Selected Data Of Speed Gates Automatically With Number Of World Leading Ams Systems And This Must Be Automated With Few Clicks Only. Rechargeable Battery Based Systems Should Have At Least 8 Hours Backup Or More. The System Should Be Robust Enough To Be Used In Various Weather Conditions. Should Have Height Adjustable Tripod Stands To Accommodate Various Sports Activities And Test Protocols. Should Provide One (1) Ipad Of Desired Specification To Run The Application (With Minimum 1 Year Warranty) Warranty For 2 Years. Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. , Kinematic Analysis System (Open) , . Marker-Based And Markerless (Ai Based) Biomechanical System For Two-Dimensional (2D) Analysis Of Gait Analysis Including Walking And Running Activities, Posture And Other Sports Activities. 2. Biomechanical Motion Analysis Software (Pre-Installed In Computer) Within Built Modules For Standing & Sitting Posture Analysis, Walking Gait Analysis & Running Gait Analysis, Compatible With A Suitable Operating System. 3. It Should Allow Measurement Of Joint Angles & Other Data From Sports Specific Activities Like Jump, Squat, Golf, Tennis Etc. 4. It Should Also Have Features For Marker-Less Assessment Of Functional Activities Like Squats And Other Range Of Motions Of The Body During Various Activities. 5. It Should Be Able To Analyze The Anterior, Posterior, Left & Right Lateral Views Of The Subject And Provide The Following Parameters: (A) Walking Gait Analysis: Rear Foot Eversion/Inversion, Lateral Pelvic Drop, Knee Flexion/Extension, Hip Flexion / Extension, Ankle Plantar /Dorsiflexion, Knee Ab /Adduction, Stance Phase % - Swing Phase %, Step Length, Stride Length, Gait Velocity Etc. Data To Be Measured For Both Left And Right Extremities (B) Running Gait Analysis: Rear-Foot Eversion/Inversion, Lateral Pelvic Drop, Trunk Side Bending, Crossover Gait, Knee Flexion, Leg Inclination Angle, Knee Toe-Alignment, Hip Extension, Ankle Plantar Flexion, Net Vertical Oscillation Of Center Of Mass, Knee Ab /Adduction, Ground Contact Time Etc.. Data To Be Measured For Both Left And Right Extremities. (C) Posture Analysis: Major Postural Deviations Like Rear-Foot Eversion /Inversion, Forward Head Posture, Shoulder Protraction, Genu Recurvate, Lateral Head Tilt, Shoulder Level, Lateral Pelvic Drop, Lateral Trunk Sway, Q Angle (D) Sitting Posture Angle: Viewing Angle, Viewing Distance, Forward Head Angle, Elbow Flexion/Extension, Trunk Flexion/Extension, Knee Flexion/Extension, Hip Knee Alignment (E) Bike Fitting: Major Parameters Like Ankle Plantar Flexion /Dorsiflexion, Knee Flexion/ Extension, Hip Flexion, Hip Vertical Travel, Back Angle, Elbow Angle, Armpit Angle, Kops, Knee Tracking. (F) Squat Analysis: Major Parameters Like Descent: Ascent Ratio, Squat Stance Width, Heel Rise Detection, Head Tilt, Shoulder Tilt, Lateral Trunk Tilt, Pelvic Tilt, Frontal Knee Alignment, Knee-Toe Alignment, Trunk Inclination (Sagittal Plane), Tibia Inclination (Sagittal Plane), Knee Flexion (Depth Of Squat). 6. It Should Be Able To Generate Organized Reports With Following Features: (A) Data Represented In Tabular & Photographic Form (B) In Built Reference Ranges For Every Parameter Measured. (C) All Data Lying Outside Reference Ranges To Be Highlighted In Bold (D) Automatic Documentation Of All Observations And Abnormal Biomechanics In Form Of Notes (With Choice Of Hindi Or English Language If Needed). (E) Automatic Summary Of All Reports Should Be Generated. 7. It Should Have An Option To Export All Data To Excel Sheets 8. It Should Have An Inbuilt Comparison Feature That Generates Post Comparison Reports To Monitor Changes In Patients Posture And Gait. 9. It Should Have An In-Built Data Base Feature For Storing Analysis Data. 10. Software Should Use Ai (Artificial Intelligence) Models To Provide Markerless Analysis. 11. Software Should Also Use Ai (Artificial Intelligence) Models To Aid In Marker Digitization In Case Of Marker Based Analysis. 12. Motion Capture Cameras Supporting Video Capture In Outdoor Conditions (Running Track) As Well As Indoor Conditions (Floor, Walkway & Treadmill). Camera Specifications: (A) Wired Cameras-04 In Numbers With Capture Rate Up To 60 Fps. (B) Wirelesscameras-02 In Numbers With Capture Rate Up To 240 Fps. 12. The System Should Have Data Transfer Cables And Connector Cables For Camera Along With Tripods For Mounting Of Cameras. 13. Marker Set (With Marker Placement Guide) For Standing Posture, Walking Gait Analysis, Running Gait Analysis And Bike Fitting With Reusable Markers Or Disposable Markers (Adequate In Number For Conducting At Least 100 Tests Each) 14. Compression Clothing For Lower Body & Upper Body Should Be Provided. 15. Quality Clearance For Cameras: Usfcc/ Euce/ Isobis (Either Of The Certifications). 16. Should Be Safe And Non-Invasive, Easy To Use. 17. Carry Case/Bag For Storing And Carrying All Hardware Equipment To Be Provided. 18. In Person Training, Virtual Assistance & Technical Support For System Operation. 19. The Biomechanical Analysis Software Should Have License Validity Along With All Updates And Bug Fixes For A Minimum Period Of 10 Years. 20. The System Should Come With A Hardware Warranty Of 3 Years. 21. Computer Specifications: Intel 5Th Generation Processor Or Better, 8 Gb Ram, Windows 10/11, At Least 2 Usb Ports. , Foot Pressure Analysis System (Open) , 1. The Number Of Sensors Should Be Between 2900 To 4000. 2. The Active Sensor Area Should Be At Least 375 X 375 Mm. 3. The System Should Be Able To Perform Static (Standing) & Dynamic (Walking) Assessment And Provide Data Of Foot Pressure Distribution During These Activities. 4. It Should Also Have Capability To Perform Sway (Balance) Assessments During Eyes Open And Closed Conditions. 5. System Should Be Able To Generate Automated Remarks For Symmetries Of Pressure Distribution. 6. System Should Be Able To Identify Change In Pressures With & Without Footwear /In Soles. 7. Option Of Comparing Patients Data Over Time Should Be Provided. 8. Option Of Exporting Report Data In Excel Format Should Be Available. 9. Facility To Email Report With Patient Information Should Be Provided. 10. System Should Have Wired Operation. 11. System Should Work Without The Internet. 12. Should Have Operating Temperature Range Between 5° C To 50°C 13. Frequency Range Should Be At Least 100 Hz 14. Pressure Range Should Be Between 1 To 150 Psi 15. Sensor Resolution Should Be Equal To Or More Than 2 Per Cm^2 16. Sensor Technology Should Be Piezo Resistive 17. Should Be Supplied With A Padded Carry Bag. 18. Should Be Supplied With 2 Additional Dummy Platforms 19. System Should Not Need A Separate Electrical Supply And Should Draw Power From The Computer. 20. The Complete System Should Have 3-Year Hardware Warranty Period Along With Software Updates And Tech Support. Training For Installation And Demonstration Shall Be Provided At Olympian Balbir Singh Senior International Hockey Stadium, Sector- 63, Mohali, Punjab. Please Enable Macros To View Boq Information

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Punjab View Result →

11.

Heavy Industries and Public Enterprises #11321092 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 3

Assam View Result →

12.

Communications and Information Technology #11304653 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 1

West Bengal View Result →

13.

Railways #11298516 AOC

Supply Of fiber media converter , the offered equipment is a fiber media converter, model gomc-bi3512-20 or equivalent , de signed for conversion between 10/100/1000base-tx copper ethernet and 1000base-fx optical fiber networ ks. the converter supports ieee 802.3, ieee 802.3u, ieee 802.3ab and ieee 802.3z standards, ensuring com patibility with gigabit ethernet networking applications. it provides one rj45 copper port with auto-negotiat ion support for 10/100/1000 mbps data rates and one sc type bi-directional fiber port operating at tx 1310 nm / rx 1550nm wavelength with transmission distance up to 20 km over single-mode optical fiber. the de vice supports full duplex flow control and half duplex back pressure for efficient data transmission. led indi cators are provided for power, optical link/activity, full duplex status, twisted pair link/activity and transmis sion rate indication. the converter operates on dc 5v, 1a power supply with optional external or internal p ower supply configuration and power consumption less than 3w. it is designed to operate in environmental conditions ranging from -10?c to +55?c with storage temperature from -40?c to +85?c and relative humidi ty from 5% to 95% non-condensing. the unit dimensions are 94mm ? 70mm ? 26mm for external type and 140mm ? 110mm ? 30mm for internal type. the product is suitable for network communication, ftth/fttb /fttx applications, isp backhaul networking and subscriber end connectivity. the equipment complies with ce, fcc and rohs certifications. [ warranty period: 36 months after the date of delivery ] ]

Contract Date: Jun 17, 2026 Contract Value : ₹ 42,480

Government Departments No of Bidders 1

Karnataka View Result →

14.

Power #11292212 Technical Bid

Tender for Procurement Of Different Valves For Etp And Ash Water System Under Ahm-Ktps. , Gate Valve,500Nb Ci,Ci To Fg200 For Bottom Ash Additional Data: Ci Double Flanged Raising Spindle Hand Wheel Operated Gate Valve For Etp.Pn1.0 As Per Is 14846 Flange Drilling To Is 1538. Body:-Ci To Fg200, Door Face:-Ss410 .Seat Ring:-Ss410 With Back Seat Arrangement & Without Gear Box, Flange To Flange -700Mm,With 20Holes For M20 Bolts,Alongwith 02 Nos Of Ms Companion Flanges To Be Used As Isolating Valve In Etp Clear Water Header Class-150 , Gate Valve,400Nb Ci,Ci To Fg200 For Bottom Ash Additional Data: Ci Double Flanged Raising Spindle Hand Wheel Operated Gate Valve For Etp.Pn1.0 As Per Is 14846 Flange Drilling To Is 1538. Body:-Ci To Fg200, Door Face:-Ss410 .Seat Ring:-Ss410 With Back Seat Arrangement & Without Gear Box, Flange To Flange -600Mm,With 16 Holes For M20 Bolt,Alongwith 02 Nos Of Ms Companion Flanges To Be Used As Isolating Valve In Clear Water Line To Stg-1&2 Ash Water M/Up Class-150 , Gate Valve,350Nb,Cs,Class-300 Gear Operated With Handwheel,Taper Fixed Wedge,Wedge Ring-Aisi-410,Body-Cs,Flange To Flange-760Mm,Flange- 55Mm Thk X 20Holes X M24 Additional Data: Gate Valve,350Nb,Cs,Class-300 Gear Operated With Handwheel,Taper Fixed Wedge,Wedge Ring-Aisi-410,Body-Cs,Flange To Flange-762Mm,Flange Od-585Mm,Flange Thk-60Mm,No Of Holes-20 Nos X 20Mm Diapcd-515Mm Hyd.Test Pressurebody-78Ksc, Seat & Back Seat-52Ksc Test Standard-Api 598,Alongwith 02 Nos Of Carbon Steel Is 2062 Companion Flanges To Be Used As Ash Water Pp Discharge Valves , Gate Valve,300Nb,Ci,Handwheel Is:780 Class-Ii,Type-Bb,Osrs,Taper Wedge,Flange Bs:10F,16 Holes,Body/Wedge-Ci Is:210 Fg220,Seat Ring/Wedge Face Ring-Aisi 304,Stem -Aisi 410 Additional Data: Additional Data:Ci Double Flanged Raising Spindle Hand Operated Gate Valve Pn 1.0 As Per Is4846 Flange Drilling To Is 1538 Body- Ci Fg200,Door Face-Ss410,Seat Ring-Ss410 With Back Seat Arrangement & Without Gearbox Dimensions:-Flange To Flange-380Mm,

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 6

West Bengal View Result →

15.

Public Administrative Department #11290947 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 142

Uttar Pradesh View Result →

16.

Power #11269763 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Uttarakhand View Result →

17.

Public Administrative Department #11259499 Technical Bid

Tender for Works Of Cmc For Allied Data - Back Up System And Replacement Of Rechargeable Power Units For Ct - Scan Department At Kem Hospital

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Maharashtra View Result →

18.

Educational and Research Institute #11223212 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Boards / Undertakings / PSU No of Bidders 6

Jammu And Kashmir View Result →

19.

Public Administrative Department #11219028 Technical Bid

Tender for Supply Of Office Tables , Computer Tables And Chairs For Janganna Office Setup At Ghandhi Bhawan, Station Road Ajmer. , Medium Back Chair Revolving Medium Back Chair Leatherette Chair Providing And Placing Mid Back Chair. Colour Black The Seat And Back Shall Be Made Up Of 1.2Cm.Thick Hot Pressed Plywood Upholstered With Pure Leatherette Of Required Color And Moulded Polyurethane Foam. Back Size: 53.0Cm (W) X 73.0Cm (H), Seat Size: 54.6Cm (W) X 49Cm (D). The High Resilience Polyurethane Foam Is Moulded With Density=45+/-2 Kg/M Cube And Hardness Load 16+/-2 Kgf As Per Is: 7888 For 25% Compression. The Seat And Back Are Arrested Together With A 9.0Cm (W) Spine Made Of 0.8Cm Thick Hr Steel. The Armrest Tube Assembly Is Made Of 2.54Cm X 0.16Cm. M.S. E.R.W. Support Tubes And Chrome Plated. The Armrest Top Is Made Of Abs & Upholstered With Foam &Leatherette . The Pedestal Is Made Of Die-Cast Aluminum With Buffing Finished. It Is Fitted With 5Nos. Twin Wheel Castors. The Pedestal Is 67.0Cm Pitch-Center Dia (77.0 Cm With Castor). The Twin Wheel Castors Are Injection Moulded In Black Nylon. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Computer Table Size 160Cm X 75Cm Size With 75 Cm Height , Office Table Size 160Cm X 75Cm Size With 75 Cm Height Compatibility Report For Boq1 (1).Xls Run On 5/11/2026 13:04 The Following Features In This Workbook Are Not Supported By Earlier Versions Of Excel. These Features May Be Lost Or Degraded When Opening This Workbook In An Earlier Version Of Excel Or If You Save This Workbook In An Earlier File Format. Significant Loss Of Functionality # Of Occurrences Version Any Effects On This Object Will Be Removed. Any Text That Overflows The Boundaries Of This Graphic Will Appear Clipped. 3.0 Excel 97-2003 One Or More Cells In This Workbook Contain Data Validation Rules Which Refer To Values On Other Worksheets. These Data Validation Rules Will Not Be Saved. 3.0 Excel 97-2003 Minor Loss Of Fidelity Some Formulas In This Workbook Are Linked To Other Workbooks That Are Closed. When These Formulas Are Recalculated In Earlier Versions Of Excel Without Opening The Linked Workbooks, Characters Beyond The 255-Character Limit Cannot Be Returned. 5 Defined Names Excel 97-2003 Some Cells Or Styles In This Workbook Contain Formatting That Is Not Supported By The Selected File Format. These Formats Will Be Converted To The Closest Format Available. 5.0 Excel 97-2003

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Rajasthan View Result →

20.

Educational and Research Institute #11209017 AOC

Bids Are invited for Boq Iteam Double Beam Uv Visible Spectrophotometer - Variable Bandwidth 1Nm 2Nm 4Nm 8 Cell Holder , Ph Meter Basic - Range 0 To 14.00 Ph Ph Resolution 0.1 Ph To0.01 Ph Accuracy 0.01Ph Calibration Points Up To 3 Points Ph Buffer Options Usa Ph 4.01 7.00 10.01 Automatic Memory Up To 25 Readingstemperature Compensation Atc , Conductivity Tds Meter - Conductivity Range 0 To 200Mscmbig Screen Large Lcd Display With White Backlight Memory Upto 100 Readings Usb Interface 0.001 Resolution 3 Points Calibration , Uv Transilluminator - Na , Double Distillation Plant - Output 4 Ltr And Hr Cooling Water Consumption Ltr Or Hr 150 Ltr Or Hr Power Rating Kw 6 Kw , Multi Tube Vortex Mixer - Operation Mode Run And Touch Operation Speed Range 500 To 3000Rpm Litude 4Mm Horizontal Swing Timing Function Led Display Maximum Load 4Kg Process Upto 50 S Les At A Time , Orbital Shaker Digital Display - Bushless Motor Speed Range 40 200Rpm Plate Size 250 Into 250 Into 50Mm Maximum Load 2Kg Timing Function Universal Tray Platform Operation Mode 20Mm , Mini Thermostatic Incubator - High Precision Controller, Precise Temperature Control, Over Temperature Alarm,Inner Chamber Surround Heating, Uniform And Stable Temperature,Compact Design, Light Weight, Small Volume Energy Saving And Power Saving, Equipped With Handle,Easy To Carry & Clean, Mirror Finishing Stainless Steel Inner Design,Unique Geometric Cavity Clean Design. , Multiposition Magnetic Stirrer - Heating And Stirring Facility Asynchronous Control Lcd Display Brushless Motor Ss304 Stainless Steel Plate Corrosion Resistance No Of Stirring Point 4 Into 500Ml Rpm 50 1200 Time Setting Function Plate Temp 120C , Water Bath - 2 Hole 4 Hole 6 Hole 8 Hole Temperature Range Rt 5C100c Time Function Ss304 Stainless Steel Tank Human Body Movement Sensor,Automatic Temperature Control Program Ultra Small Empty Dry Burning Sensor , Digital Ultrasonic Cleaner - Temperature Range Rt 7 C To 80 C Blue Led Display Normal And Soft Power Control For The Cleaning Spots Degas Function Available Time Setting Tank Ss304 , Portable Do Meter - Polarographic Dissolved Oxygen Electrode Lcd Display With White Back Light Long Battery Life 1 Or 2 Points Calibration Auto Power Off Memory Stores Or Recalls Up To 100 Data Sets Usb Communication Interface Carrying Case Easy To Carry For Field Use , Four Probe Method Apparatus - Four Probe Arrangement For Ge Crystal S Le Ge Crystal Mounted Oven Upto 300C Thermometer 0 To 300C Constant Current Power Supply Digital Accuracy 1Percent Load Regulation 0.03 For No Load To Full Load Digital 200Mv And 20Ma , Hall S Effect Apparatus - Consists Of 7 Point 5 Kg Electromagnet Power Supply For Electromagnet 0 To 100V 6A Mp Germanium Crystal Mounted And Digital Constant Current Power Supply With Two Meters 0 200Mv And 0 20Ma Halls Voltage And Crystal Current Gauss Meter Digital 0 20K Gauss With Hall Probe And Two Wooden Stands , Fume Hood - Fume Hood Fume Hood Is An Enclosure Which Is Used To Remove Fumes And Air Borne Parti Cles At The Contaminate On Source It Is A Kind Of Fume Venti Lati On System Which Prime Work Is To Remove Smoke Dust Mist And Chemical Fumes And Restrict Their Entry Into Laboratory Environment A Laboratory Fume Hood Comprises Of Metallic Sheet Enclosure Steel Or Marble Stone Work Bench Service Fixture And Electrical Points For Fume Exhaust Heavy Duty Blowers Are Fi Tt Ed And Remotely Connected To The Duct Chemical Fume Hood Fume Cupboard And Fume Closet Are Similar Names Of Fume Hood Outer Body Made Of Ms Powder Coated Or Stainless Steel 304 Grade For Suction On In Fume Hood We Provide Centrifugal Blower Assemble Made Of Direct Drive Motor Fitted With Fluorescent Light And A Gas Cock For Gas And Air Supply Power 220 230Volts Ac Supply Working Table Size 3 Inch Into 2 Inch Into 2 Inch Whole Cabinet Made Of Cold Rolled Steel Duly Powder Coated And Inner Frp , S Le Vials 30Ml - Each Pkt Containing 100 Units , S Le Vials 50Ml - 1Pkt, Respectively Each Pkt Containing 100 Units , High Temperature Controlled Furnace - High Temp Controller Furnace 1200 Degree 9 Into 4 Into 4 Microprocessor Pid Digital Temp Indicator Cum Controller Instead Of Energy Regular Pyrometer , Micro Oven - 18 Into 18 Into 18 Temp Upto 250 Deg Double Walled Inner Chamber Of Andoized Stainless Steel Digital Temp Indicator Cup Controller Pid Temp Digital , Weighing Balance - Kab5l 220G 0.1Mg Internal Calibration Lcd Display Emfc Technology Underhook Piece Counting , Micropipettes 1Ml - Quickpip Fixed Volume Micropipette With Fully Autoclavable Calibration Accuracy As Per Iso 8655 Digital Display Stream Lined Tip Ejector Two Step Operation , Micropipette 10 - Quickpip Fixed Volume Micropipette With Fully Autoclavable Calibration Accuracy As Per Iso 8655 Digital Display Stream Lined Tip Ejector Two Step Operation , Micropipette 20 - Quickpip Fixed Volume Micropipette With Fully Autoclavable Calibration Accuracy As Per Iso 8655 Digital Display Stream Lined Tip Ejector Two Step Operation , Micropipette 100 - Quickpip Fixed Volume Micropipette With Fully Autoclavable Calibration Accuracy As Per Iso 8655 Digital Display Stream Lined Tip Ejector Two Step Operation , Micropipette 200 - Quickpip Fixed Volume Micropipette With Fully Autoclavable Calibration,Accuracy As Per Iso 8655 Digital Display Stream Lined Tip Ejector Two Step Operation , Laboratory Autoclave Vertical - Vertical Double Wall 98 Ltr Load 5Kw Size 450Mm Into 600Mm Inner And Outer Ss Radial Lock Digital Temp Indicator Fitted With Vaccum Breaker As A Safety Device 220 Volt Ac Supply , Multimeter - A Multimeter Range Instrument For Measure Of Voltage Current And Resistance Moving Coil Meter Having Red Pointers Over Two Colour Scale Complete With Test Leads Probez And Internal Battery , Current Ammeter - Dc Mounted In Beautiful Bakelite Acrylic Stand With Accuracy 2.0Percent F S D With Lock Type Terminal Packed In Card Box All Common Ranges Available , High Speed Centrifuge Remi Rpm 17300 In R 24 - Stepless Speed Regulator With Zero Speed Indicator Digital Speed Indicator.Dynamic Brake 0 To 99 Minutes Digital Count Down Timer Imbalance Detector With Cutoff Safety Lid Interlock , Celestron Handheld Digital Microscope Pro - Magnification Range 20 Into To 200 Into Ring Illuminator 8 Led Adjustable Cmos Sensor In Lieu Of Eyepiece Total Quantity : 36

Contract Date: Ref. Documents Contract Value : ₹ 63.08 Lakh

Government Departments No of Bidders 10

Bihar View Result →

21.

Educational and Research Institute #11191898 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Kerala View Result →

22.

Educational and Research Institute #11191269 AOC

Contract Date: Jun 06, 2026 Contract Value : ₹ 6.64 Crore

Government Departments No of Bidders 8

Maharashtra View Result →

23.

Home Affairs #11189992 AOC

Contract Date: Ref. Documents Contract Value : ₹ 3.98 Crore

Government Departments No of Bidders 3

Andhra pradesh View Result →

24.

Power #11177233 AOC

Tender For The Various Dcw Works And Improvement Works In O And M Perambalur Division; 1 Excavation of Pole Pits for poles upto 8.00m length by using JCB/Manual (1.25 X 0.6 X 1.5M) 2 Excavation of Pole Pits for pole above 8.00m length by using JCB/Manual (1.25x06x1.83M) 3 Excavation of Pole Pits in Hard Soil (common to all size of poles) 4 Excavation of Pole Pits in rocky area (common to all size of poles) by blasting / Manual 5 Excavation of Stay pit of 4.5 to 5 depth using JCB / Manual (0.95 X 0.6 X 1.2 M) 6 Excavation of Stay pit in Hard rock soil (0.95 X 0.6 X 1.2 M) 7 Erection of RCC, REC, PSC poles upto 8.00m length by using Crane / Manual 8 Erection of RCC, REC, PSC poles above 8.00m length by using Crane / Manual 9 Erection of metal supports above 9m / RSJ / Rail Pole/Tubular Poles 10 Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc. excluding stay pit excavation 11 Erection of additional Stay in the same stay rod, excluding excavation of stay pit and burial of stay rod. 12 Fixing of V cross arm 3.5feet 13 Fixing of V cross arm4.5 feet 14 Fixing ofV cross arm5.0 feet 15 Fixing of Fixing of LT S phase cross arm 16 Fixing of Fixing of LT 3 phase cross arm 17 Fixing of Fixing of HT / LT Ti fitting 18 Fixing of Fixing of HT PIN insulator with Pin 11 kv 19 Fixing of HT PIN insulator with Pin 22 kv 20 Fixing of HT PIN insulator with Pin 33 kv 21 Fixing of LT PIN insulator with pin 22 Fixing of HT strain disc 11 KV with Metal parts 23 Fixing of HT strain disc 22 KV with Metal parts 24 Fixing of HT strain disc 33 KV with Metal parts 25 Fixing of Tapping cross arm 26 Fixing of Two Tapping cross arm per cut point upto 33 KV line including fixing of Discs,insulators and Jumpering etc.. 27 Fixing of Top Channel 28 Fixing & erection of Cross bracing 29 Fixing of shackle with Metal parts 30 Fixing of Aluminium knob 31 Fixing of HT LAS (3 Nos.) 32 Paving and stringing of conductors of sizes upto 7/2.59 mm ACSR or other equivalent conductor 33 Paving and stringing of conductors ofabove7/2.59 mm ACSR or other equivalent conductor upto 7/3.35mm ACSR or other equivalent conductor 34 Paving and stringing of conductors of7/4.09mm ACSR or other equivalent conductor 35 Paving and stringing of conductors of7/4.72 mm Dog Conductor or other equivalent conductor 36 Releasing and reerection (resagging) of one run of all sizes of conductor 37 Complete Erection of Double Pole Distribution Transformer structureas per TNEB standard likepole pit excavation & erection, stay pit excavation and erection, feeders arrangement, Open type fuse unit,HT / LT LAS and jumpering, 3 Nos Earth pits with earth trough, concreting,coping, Colour washing of RCC poles, Painting of Structure Materials (including cost of paint(red oxide,Aluminium) and distember), Danger Board fixing etc.. (excludingerection of Distribution Transformer) 38 Erection of11 KV/22 KV single pole Structure includingerection of DT complete with centre support with pole pit excavation & erection, stay pit excavation and erection, feeders arrangement, Open type fuse unit, HT /LT LAS and jumpering, 3Nos earth pits with earth trough, structure earthing complete, concerting,coping, colour washing of RCC poles, painting of structure materials (including cost of paint (red oxide,aluminum)and distermber), danger board fixing etc..(exculding erection of distribution transformer) (Data as per Annexure III) 39 Erection of distribution transformer inculding loading of distribution transformer at stores and erection at structure or vice versa. Upto 25 KVA distribution transformer/metering set. 40 Erection of Distribution Transformer including loading of Distribution Transformer at stores and erection at structure or vice versa. Upto 25 KVA to 100 KVA 41 Failed DT replacement below 100 KVA 42 Failed DT replacement 100 KVA and above 43 Erection of DP structure with stay as per TNEB standard including fixing of top channel, cross bracing, HG Fuse Unit, concreting, painting, colour washing etc., With 11 KV AB switch using all types of poles of size 9.14 m and above length 44 Erection of DP structure with stay as per TNEB standard with 22/33 KV AB switch using all types of poles of size 9.14 m and above lenth including fixing of top channel, cross bracing, HG Fuse Unit, concreting, painting, colour washing etc., 45 Erection of single pole DP with completewith earthing 46 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Mass concreting of poles with coping 0.6MX 0.45MX1.25M 47 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Sleeveconcreting with coping 0.6MX 0.6MX0.3M 48 Concreting with 1:4:8 mix using 40 mm Jelly including curing(Material + labour)Stay concreting with coping 0.3M dia and 0.75 long 49 Earthing of poles with GI wires 4 or 6 SWG by coil earthing 50 Provision of spike with earthing arrangement including material (other than clamps & GI wire ) and fabrication 51 Pipie earthing including excavation of earth pit and fixing earth pipe 3 m length 52 Replacing the corroded earth pipes of transformer structure and replacing the earth wire completely with aluminium lugs for termination 53 Replacement of corroded earth pipe 54 Erection of fourth Earth pipe including earthing 55 Loading& unloading of REC, RCC, PSC pole upto 8.00 m length 56 Loading& unloading of All REC, RCC pole above 8.00 m length 57 Loading of Conductor with ramp 58 Unloading of Conductor with ramp 59 Loading of Iron & Steel 60 Unloading of Iron & Steel 61 Loading of line materials (Including Stacking except conductor drum & scrap material) 62 Unloading of line materials (Including Stacking except conductor drum & scrap material) 63 Loading of 11 KV disc 64 Unloading of 11 KV disc 65 Loading of LT Pin insulator shackle, guy shackle, LT Pin, Metal parts, HT pin etc., 66 Unloading of LT Pin insulator shackle, guy shackle, LT Pin, Metal parts, HT pin etc., 67 Loading of scrap materials 68 Unloading of scrap materials 69 Transportation of all types and sizes of poles and other associated materials from Road side to pole pit and vice versa upto 1.0 KM 70 Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) For a lead upto 5 KM 71 Transportation of all type of poles by bullock cart or other vehicle (for all sizes of poles including loading and unloading) Above 5 KM of lead of every KM 72 Transporting of Distribution Transformer / Line materials from stores to office / site upto 10KM distance by engaging 1 Ton capacity Minidor (Lorry) 73 Transporting of Distribution Transformer / Line materials from stores to office / site Above 10 KM distance by engaging 1 Ton capacity Minidor (Lorry) 74 Provision of guarding with two numbers earth pits excluding stay set erection - gradle guarding including earthing and earth pit excavation without material 75 Dismantling of RCC, REC, PSC & metal pole of all sizes including the closing of the pit 76 Dismantling of stay set complete including stay rod 77 Dismantling of conductor ofupto 7/3.35 including transporting the conductors to the nearest road side and stocking in coils 78 Dismantling of conductor ofabove 7/3.35 including transporting the conductors to the nearest road side and stocking in coils 79 Dismantling of Transformer structure materials complete set and transporting the same from the location to the road side 80 Releasing of LT S ph X Arm with all accessories 81 Relaasing of LT 3 ph X Arm with all accessories 82 Releasing of 3 - 6 V Cross Arm/Tapping channal/GuardingX Arm with all accessories 83 Releasing of 4 - 6 andV Cross Arm with all accessories 84 Releasing of5V Cross Arm with all accessories 85 Releasing of Distn.Tr. Only at field - Upto 25 KVA / Metering set 86 Releasing of Distn.Tr. Only at field- Above 25 KVA and upto 100KVA 87 Dismantling of structure poles 88 Painting of iron poles up to 36 ft length with double coats including cost of paint 89 Painting of iron poles up to 40 ft 200/100 length with double coats including cost of paint 90 Painting of structure materials distribution transformers with aluminium paint of structure poles and writing of transformer details (Paint to be supplied by Department) 91 Labour charges for alteration of back clamp 92 Labour charges for alteration of Stay clamp 93 Providing of holes all size angles/Channel upto 3/4 94 Providing of holes all size angles/Channel above 3/4 95 Clearing of tree branches of coconut tree 96 Clearing of tree branches of Neem, Tamarind, Country tree 97 Clearing of karruvelam 98 Converting pin point into cut point in HT Lines 99 Converting pin point into cut point in LT Lines (single / Three phase) 100 Resagging of lines for all sizes cut point location 101 Set right of leaning poles both HT & LT (Pin point ) 102 Set right of leaning poles both HT & LT ( Cutpoint) 103 Replacement of Guy Shackle only in Existing Stay 104 Replacement of 11KV Polymer Pin Insulator 105 Replacement of 22KV Polymer Pin Insulator 106 Replacement of 33KV Polymer Pin Insulator 107 Replacement of 11KV Disc 108 Replacement of 22KV Disc 109 Fencing of Distribution Transformer Structure at Road side- Fabrication and Erection including all materials (Chain link fencing)

Contract Date: May 26, 2026 Contract Value : ₹ 25.00 Lakh

Boards / Undertakings / PSU No of Bidders 2

Tamil Nadu View Result →

25.

Railways #11171096 AOC

Supply Of supply of induction heater 2.6 kva , supply of induction heater 2.6 kva with micro controller based control system having memor y back up for different sizes of components for bearing bore dia. 20 to 300 mm and weight not exceeding m ore than 40 kgs having following standard accessories - 1. horizontal yoke -14 x 14 x200 mm - 01 no. 2. h orizontal yoke - 20x20 x 220 mm - 01 no. 3. horizontal yoke - 40 x 45 x 220 mm - 01 no. 4. magnetic temp erature probe - 01 no. 5. pair of hand gloves , heat resistance, - 01 pair. technical specification i. data stor age- 1000 jobs. ii. infrared remote - 01 no. iii. re-writable programmer for memory. iv. error guide with alar m for reprogramming [ warranty period: 30 months after the date of delivery ] ]

Contract Date: May 26, 2026 Contract Value : ₹ 2.97 Lakh

Government Departments No of Bidders 1

Rajasthan View Result →

26.

Educational and Research Institute #11169723 AOC

Purchase Of Three Seater Desk Cum Bench , Computer Lab Work Stations And Chairs For Class Rooms, Teaching Block-Ii At Chaudhary Ranbir Singh University, Jind , Student Desk Cum Bench Specifications: The Class Room Desk Consists Of Front Desk, Middle Row Comprising Of Seat For Front Desk, Back Supported & Jointed With It The Desk Behind For Another Seat, Back & Another Desk For The Person Sitting Behind And So On Till The Last Row Which Shall Consist Of Seat Only, Provided With Back Support. Thus The Desking System Shall Consist Of One Row Of Front Desk, Several Rows Of Middle Seat & Back Desk & Again One Last Row Of Back Seat. The Front Edges Of Mdf Board Shall Be Post Formed And All Other Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue.Mdf Board Shall Have .8 Mm Thick Laminate On Top, Front And Rear. Underside Of The Table Shall Be Finished With 0.6 Mm Thick Balancing Laminate Of White Colour. A. Front Desk: Top Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Top Of Front Desk Shall Be 25Mm Thick Mdf Laminated On Both Sides As Mentioned Above. The Storage Shelf And Front Cladding Will Consist Of 18 Mm Thick Mdf Board Laminated As Mentioned Above.The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Mdf Board 18 Mm Thick. All The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere. Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. , B. Middle Seat & Desk: Shall Consist Of Seat, Back & Writing Shelf Behind And Storage Shelf Below It. The Detail Specifications Will Be As Under: Seat Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. Back Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Seat, Back & Writing Desk Shall Be 25Mm Thick Mdf Laminated On Both Sides, Top Laminate & Balancing Laminate On Back As Mentioned Above. The Storage Shelf Will Consist Of 18 Mm Thick Mdf Board Laminated As Mentioned Above. Theall The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere. Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Epoxy Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. Writing Shelf Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Mdf Board 18 Mm Thick. , C. Last Row: (Back Row) The Last Row Consists Of Seat & Back Only Mounted On 50 X 25 X 1.6Mm Thick Crca Pipe Frame. Back Row Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Back Row Shall Be 25Mm Thick Mdf Laminated As Mentioned Above. The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Mdf Board 18 Mm Thick. All The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere. Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Epoxy Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. Note: 1 Crca Steel Pipes Shall Be Of Tata/Jindal Or Equivalent. 2. All Pre-Laminated Mdf Boards Shall Be Of Action Tesa/Marino/Godrej Make. 3. The Front Edges Of Mdf Board Will Be Post Formed. 4. Pvc Lipping 2 Mm Thick Will Be Provided On Remaining Edges. , Supply And Installation Of Work Stations - 900W X 600D Providing And Placing Tile Based Modular Workstation, With Partitionthickness As 50-60 Mm And Ht -1200 Including Powder Coated Aluminium Trims.Tiles On Main Spine: Combination Of Top Tiles Are Plb/Fabric Tackable/Whiteboard Tile. Bottom Tiles - Plain Metal. Fin: 50-60 Mm Thick Panel Formed Out Of Blocks Which Are 2X9 Mm Thick Plb Boards Wrapped With Laminate At Intermediate Block And Top Block. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Decorative Laminate/White Board. System Shall Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finish. (Decorative Laminate) Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. The Partition Has Two Integrated Raceway Provided One At Skirting Level And Another At The Work Surface Level Thus Ensuring Separation Of Power And Networking Cables. Necessary Cut Outs For Switches And Switches As Per Site Requirement Will Be Provided. Cost Of Wires Not To Be Considered In Furniture. Work Surface - Made Of 25 Mm Thick Pre-Laminated Particle Board Confirming To Is:12823 Interior Grade With Post Forming On Front Only Of Size 900 Mm W X 600 Mm. Pvc Edge Binding Tape 2 Mm Thick Will Be Provided In Balance Sides. Note: All Partitions And Side Panels Have Leveling Screws For Adjustment In Case Of Uneven Floor To Take Care Of +/- 20 Mm Of Uneven Flooring.Raceway:-The Raceways Are Made Out Of 0.8 Mm Thick Crca & Powder Coated. The Electrical Raceway Can Be Provided Below Worktop Or Above Worktop, These Are Hook On Type Which Will Be Mounted On The Verticals. The Skirting/Data Raceway Is Hollow And Will Be Mounted On The Raceway Channels Cpu Trolley Fixed Type:Cpu Trolley: The Metal Tray Is Made Of 1.0 Mm Thick Crca Sheet And Side Support Is Made Of 0.8 Mm Thick Crca Sheet. On Wall Side (With Common Side Partition Sharing) , Back To Back (With Common Side Partition As Well As Common Central) , Chairs For Computer Lab Work Stations Without Arm: Specifications Upholstered With Fabric, High Resilience Polyurethane Foam, Fixed Type Mechanism, Tubular Frame. Back: (W) 39.0 Cm X (H) 38.0Cm, Seat: (W)45.0Cm X (D) 42.0Cm Overall Dimensions Of Chair Scat Height -45.0Cm. Height -81.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-56.0 Cm And Depth-54.0 Cm. The Seat Shall Be Made From 1.2 +/- 0.1Cm. Thk. Hot Pressed Plywood And Back Shall Be Injection Moulded From Black Co-Polymer Polypropylene Upholstered With Fabric And Moulded Polyurethane Foam Together With Seat And Back Covers. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Dimensions Of Seat Shall Be 45.0Cm (W) X 42.0Cm. (D) And Of Back Shall Be 39.0Cm(W) X 38.0Cm (H). The Seat And Back Covers Shall Be Injection Moulded In Black Co-Polymer Polypropylene. The Hr Polyurethane Foam Shall Be Moulded With Density 45 +/-2 Kg/M3 And Hardness Load 162 Kgf As Per Is:7888 For 25% Compression. The Fixed Type Mechanism Shall Be Without Back Tilt. The Tubular Frame Shall Be Made Up Of Dia 2.54 ±0.03Cm. X 0.2 +0.016Cm.Thk. M.Ser.W. Tube And Black Powder Coated (Dft 40-60 Microns). The Overall Dimensions Of Chair Shall Be Seat Height - 45.0Cm, Height -81.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-56.0 Cm And Depth-54.0 Cm.

Contract Date: May 26, 2026 Contract Value : ₹ 53.97 Lakh

Boards / Undertakings / PSU No of Bidders 7

Haryana View Result →

27.

Educational and Research Institute #11161433 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 10

West Bengal View Result →

28.

Rural Development #11141295 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Maharashtra View Result →

29.

Housing Urban and Rular Development #11133788 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Himachal Pradesh View Result →

30.

Power #11127112 AOC

Tender for Procurement Of Feed Gate(915X610),(30X33) Excen Crusher Assembly And Spares Of Bottom Ash Hopper For U#6 Overhauling,Ktps. , Feed Gate,Piston Rod Clevis # Additional Data: Moc:-En8 , Gasket,Bah Feed Gate Enclosure,18X35mm For Bottom Ash System Gasket For Ba Hopper Manhole/Feed Gate Enclosure, Moc:-Synthetic Rubber,Cross Section:-18X35mm , Ba Hopper,915X610,Gate With Shaft # Drg No.8852-2B-572# For Bottom Ash System Stg.-2 Additional Data: Feed Gate With Shaft & Gate Face (To Be Supplied In Fitted Condition With The Feed Gate) Moc:- Feed Gate-Grey Iron G3,Hardness-180Bhn Shaft:-En8 Gate Face:-Ss316 3Mmthk Face Plate +6Mm Thk Ms Back Up Plate , Ba Hopper,Guide Angle Bracket For Bottom Ash Hopper Additional Data: Moc:-Ci Fg 220 , Nozzle Inlet,Ci,Fg-220,Is:210 Drg No.8852-2A-591For Bottom Ash Slurry System,Stg-2 , Excen Crusher,33X30,Gland Follower For Bottom Ash Hopper Additional Data: Moc:-Brass/Bronze , Frame(Body),Ffed Gate,Grey Iron G3,Bah For Bottom Ash Hopper Dcips Drg No-8852-2B-572 Pt No-14 , Ba Hopper,Renewable Seat For Bottom Ash Hopper Additional Data: Moc:Ss304/Ss316 With Ms Is:226 Flange Renewable Seat To Be Supplied In Fitted Condition With Feed Gate Frame , Jet Pulsion Pump, Complete Assy, 8 Inch For Bottom Ash Slurry System Additional Data: 01 No Of Complete Assembly Consists Of:- 1)Body (Inlet)-1No,Moc-Durite/Alloy Cast Iron Is:4771-1985 Hcr 27/400 400Bhn Min 2)Aligning Ring-01No,Moc-Steel Gr-20 Is-1030 3)Flange Clamp Half (312Od X252id)-02Nos ,Moc-Steel Gr-20 Is-1030 4)Gasket- 01No,6Mmthk,Mocrubberrised Asbestos 5)8 Inch Combining Tube With 5 Inch Throat (Throat Cum Outlet Piece)-01No,Moc-High Chrome Class-Iii,Hardness-550Bhn Min 6)Nozzle Tip-01No Moc-Ss410 With Ceramic Liner 7)Nozzle Inlet-01No,Moc-Ci Fg 200 To Is 210 8)Gasket-01No,1.5Mm Thk,Moc-Rubberrised Asbestos Thickness Of Ceramic Liner:-10(Approx),Hardness-8-9 As Per Mohs Scale Thickness Of Nozzle Tip-6(Approx) Inlet Water Flow-200M3/Hr(Approx) At 175Mwc (Approx) , Hopper Jetting No

Contract Date: Jun 29, 2026 Contract Value : ₹ 21.60 Lakh

Government Departments No of Bidders 5

West Bengal View Result →

31.

Power #11110319 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 6

Jammu And Kashmir View Result →

32.

Defence #11110287 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Punjab View Result →

33.

Railways #11100869 AOC

Supply Of Solar Cctv Camera With Built In Mic And Speakersolar Cctv Camera With Built In Mic And Speaker,Solar Cctv Camera With Built In Mic And Speaker, Support Two-Way Audio, 100% Wireless & S Olar Powered, Micro-Sd Slot With 4G Support, Motion Detection, Pan/Tilt, 48 Hrs Battery Back-Up, Ip66 Wate Rproof, Color Night Viewing With Alert, Distance- 30-Meter Or More, Storage -256Gb, Resolution- 4Mp (2560 X 1440) 1080P Full Hd Vision, Camera Warranty - 01-Year, Battery -3 Years Warranty Or Similar As Per Our Re Quirement Of 4G Mini Pt Solar Linkage Camera 3+3 Mp Camera / 4Mm +4Mm Lense 18000 Mah Battery With 7 Watt Solar Panel With Micro Sd Card 256 Gb With Availibity Of Sim Card With One Month Data [ Warranty P Eriod: 36 Months After The Date Of Delivery ] ]

Contract Date: May 16, 2026 Contract Value : ₹ 7.94 Lakh

Government Departments No of Bidders 1

Madhya Pradesh View Result →

34.

Rural Development #11099934 AOC

Contract Date: Nov 20, 2025 Contract Value : ₹ 13.87 Lakh

Government Departments No of Bidders 7

Maharashtra View Result →

35.

Educational and Research Institute #11098868 AOC

Tender For Iehe Bhopal Invites Online Tender For Supply Of Sound System In The Institute , Sound System , Wall Mount Cabinet Loudspeaker General Requirements: The Loudspeaker Shall Be A Cost-Effective, 12W General-Purpose Cabinet Speaker Designed For Indoor Surface-Mount Applications. It Must Be Suitable For Both High-Quality Speech Intelligibility And Background Music Reproduction Acoustic Performance: Rated Power: 12W, With Adjustable Power Tappings At 12W, 6W, And 3W To Allow For 3 Db Step Adjustments. Sound Pressure Level (Spl): Must Provide A Maximum Special Of 102.0 Db At 6W/1M (1 Khz) And A Sensitivity Of 91.7 Db At 1W/1M (1 Khz). Frequency Range: The Effective Frequency Range Shall Be From 150 Hz To 15 Khz. Opening Angles: Horizontal: 184° (1 Khz) / 86° (4 Khz). Vertical: 66° (1 Khz) / 58° (4 Khz). Electrical Specifications: Input Voltage: Designed For 100 V Line Systems. Rated Impedance: 833 Ohms. Connection: Shall Feature A 4-Pole Push-In Terminal Block On The Rear Panel For Easy On-Site Wiring And Power Tapping. Durability: The Unit Must Be Tested For 100 Hours Of Continuous Operation At Rated Power In Accordance With Iec 268-5 Standards. Mechanical Construction Enclosure Material: The Main Body Shall Be Constructed From Solid Mdf (Medium Density Fiberboard) Covered In Durable, Easy-To-Clean Black Vinyl. Front Grille: The Front Shall Be Abs Plastic Covered With A Fine Woven Cloth In Matching Black. Baffle Design: Shall Feature An Angled Front Baffle To Optimize Sound Distribution Within The Listening Area. Mounting: The Rear Panel Must Include Three Keyholes For Quick And Secure Wall Mounting. Dimensions: 445 Mm X 151 Mm X 150 Mm / 111 Mm Environmental Limits: Operating Temperature: -5 °C To +55 °C, Storage Temperature: -40 °C To +70 °C , Wireless Microphone System General System Requirements: Classification: The System Shall Be An Entry-Level Professional Wireless Microphone System Designed For Ruggedness And Ease Of Use In Daily Operations. Ease Of Setup: The System Must Include A One-Button Automatic Frequency Scanning Function To Identify The Clearest Available Channel. Transmitter Synchronization Shall Be Achieved Via An Infrared Data Link To Ensure Error-Free Setup. Frequency Management: The System Shall Provide 32 Preset Channels, With Compatible Groups Of Eight Channels For Simultaneous Multi-Channel Use. Operating Bands: The System Shall Be Available In Multiple Rf Frequency Bands, Including: A Band: 618-634 Mhz. B Band: 678-694 Mhz. C Band: 516-532 Mhz. E Band: 850-865 Mhz. Receiver Specifications Type: Synthesized Pll With True Antenna Diversity To Ensure Stable Rf Reception. Chassis: The Receiver Must Feature A True Rack-Mountable Metal Chassis Suitable For Professional Installation. Rf Performance: Sensitivity: 1.0 Μv For 12 Db Sinad. Image Rejection: Greater Than 55 Db. Audio Outputs: Balanced Output: 20 Dbv (Max @ 40 Khz Deviation). Unbalanced Output: Adjustable From 8 Mv To 0.755V Rms. Display: Front-Panel Backlit Lcd Displaying Channel, Frequency, And Battery Status. Handheld Transmitter Construction: The Transmitter Shall Feature A Rugged Metal Body Designed To Withstand The Rigors Of Daily Use. Microphone Capsule: Equipped With A Cardioid Dynamic Capsule (Pl22) For Effective Feedback Control And Ambient Noise Rejection. Battery Life: Must Operate For A Minimum Of 14 Hours Using Two Aa Alkaline Batteries. User Interface: Features A Backlit Lcd Display And A Dedicated Mute Function To Protect The Audio Channel. Bodypack Transmitter Construction: Compact And Rugged Metal Enclosure. Input Connector: Industry-Standard Ta4F Connector For Compatibility With Various Lapel Or Headworn Microphones. Antenna: Flexible External 1/4 Wave Antenna. Acoustic & Environmental Performance System Frequency Response: 80 Hz - 18 Khz ± 2 Db Signal-To-Noise Ratio: 100 Db A-Weighted Total Harmonic Distortion: 1.0%, 0.4% Typical (Ref 1 Khz, 40 Khz Deviation) , Professional Gooseneck Microphone General Requirements: The Microphone Shall Be A Professional-Grade, High-Quality Electret Condenser Gooseneck Microphone Designed For Public Address Applications Such As Lecterns, Podiums, And Open Conferences. It Must Feature A Sleek, Slender, And Unobtrusive Design To Maintain A Clear Line Of Sight For The User. Acoustic & Technical Performance Transducer Type: Electret Condenser. Polar Pattern: Unidirectional (Cardioid) To Ensure High Front-To-Back Rejection, Providing More Gain Before Feedback. Frequency Response: Wide Range From 20 Hz To 18,000 Hz. Sensitivity: 7.5Mv/Pa Power Requirement: Operable Via A Dc Power Source Ranging From 1.5V To 9V. Mechanical Specifications Overall Length: 585 Mm (Approximately 23 Inches) Output Connector: Built-In 3-Pin Xlr Male Socket For Secure And Standard Professional Connectivity. Optional Accessories (Compatibility) To Ensure System Flexibility, The Microphone Must Be Compatible With The Following Manufacturer-Specific Accessories: Microphone Base: A Sturdy, Heavy-Duty Die-Cast Aluminium Base With An Integrated On/Off Switch, Led Indicator, And Built-In Housing For 2 Times 1.5V Um-3 Aa Cells To Power The Condenser Element. Mic Stand Adaptor: A Rugged Aluminium Die-Cast Body With A Female Xlr Connector For Direct Mounting And A Male Xlr Bottom Connector For Cable Attachment. It Must Include A 10-Meter Shielded Cable And A Threaded Brass Ferrule 5/8 27 Tpi For Standard Stand Mounting. , Mixer Amplifier General System Requirements Type: The Unit Shall Be A Professional 120W Mixer Amplifier With Integrated Usb And Bluetooth Capabilities, Designed For Public Address And Background Music Applications. User Interface: The Amplifier Shall Feature A Simplified User Interface With Preferred Setting Indicators (Colored Pins) For All Front-Panel Knobs To Ensure Ease Of Operation For Non-Technical Users. It Must Include An Led Vu Meter For Visual Output Level Indication And A 6.3 Mm Headphone Socket For Monitoring The Mixer Output. Reliability: The Unit Shall Have No Moving Parts (Such As Hard Drives) To Ensure Long-Term Operational Reliability. Audio Inputs And Media Source Microphone/Line Inputs: Four (4) Balanced Inputs, Switchable Between Microphone And Line Level Sensitivity. Switchable Phantom Power Must Be Available To Support Condenser Microphones. Priority Handling: Input 1 Shall Have The Capability To Take Priority Over All Other Inputs Via Contact Closure (Push-To-Talk) And Include An Optional 2-Tone Chime To Precede Announcements. Music Source: Integrated Media Player: Must Support Playback Of Mp3 And Wav Files (From 32 Kbit/S) Via A Usb Pen Drive (Up To 32Gb Capacity). Wireless Streaming: Built-In Bluetooth For High-Quality Audio Streaming From Mobile Devices. Remote Control: The Unit Must Be Supplied With An Ir Remote Control For The Integrated Music Source. Aux Input: A Separate Stereo Cinch Input, Internally Converted To Mono, With A Sensitivity Of 200 Mv To 300 Mv. Audio Performance And Output Output Power: 120W Rated Output Power. Loudspeaker Outputs: Constant Voltage: 100 V. Low Impedance: 4-Ohm. Call-Only Output: A Dedicated 100 V Call-Only Channel For Priority-Only Areas Or 3-Wire Remote Volume Control Override. Frequency Response: 80 Hz To 18 Khz (+1/-3 Db At -10 Db Ref. Rated Output). Distortion: 1% At Rated Output Power (1 Khz). Tone Control: Dedicated Bass And Treble Controls Providing Max ± 8 Db Adjustment. System Protection: An Integrated Limiter Circuit Must Be Included To Protect The Output Stage From Signal Clipping And Overload. Insert Feature: A Pair Of Rca Cinch Connectors Shall Be Provided To Allow The Unit To Be Used As A Separate Pre-Amplifier And Power Amplifier. Mechanical And Environmental Dimensions: 100 Mm X 430 Mm X 290 Mm (Standard 19 Wide, 2U High). Mounting: Suitable For Both Stand-Alone Use And 19 Rack Mounting. Operating Temperature: -5 °C To +45 °C. Compliance: The Unit Shall Comply With Iec 62368-1 (Safety), Cispr 32 (Emc Emission), And En 55103-2 (Emc Immunity). , Mixing Console General Requirements The Mixing Console Shall Be A Compact, Versatile 6-Channel Analog Mixer Designed For A Wide Range Of Professional Audio Applications. It Must Feature High-Quality Microphone Preamplifiers And A Rugged Construction Suitable For Both Portable And Fixed Installations. Audio Inputs And Processing Input Channels: The Unit Shall Provide A Total Of 6 Line Inputs, Configured As 2 Mono And 2 Stereo Channels. Microphone Preamplifiers: The Console Shall Include 2 Microphone Inputs Featuring Discrete Class-A D-Pre Preamps With An Inverted Darlington Circuit For Superior Sound Quality. Switchable +48V Phantom Power Must Be Available For All Microphone Inputs. Channel Processing: Mono Inputs (Ch1-2) Shall Include A 26Db Pad For High-Level Sources. Each Mono Channel Shall Feature A High-Pass Filter (Hpf) Set At 80Hz With A 12Db/Octave Slope. Equalization For Mono Channels Shall Consist Of A 2-Band Eq: High (10Khz Shelving) And Low (100Hz Shelving) With Pm15 Db Adjustment. Output And Bus Section Buses: The Console Shall Feature 1 Stereo Bus. Outputs: Stereo Out: Provided Via 2 Xlr-3-32 And 2 Phone Jacks (Balanced). Headphones: One (1) Stereo Phone Jack Output With A Dedicated Level Control. Monitoring: Visual Monitoring Shall Be Provided By A 2 Times 7 Point Led Level Meter (Peak, +6, +3, 0, -3, -10, -20Db). Technical Performance Frequency Response: Pm 0.5Db From 20Hz To 20Khz (Referenced To Nominal Output Level @ 1Khz). Total Harmonic Distortion (Thd): 0.01% @ +8Dbu (20Hz To 20Khz), Gain Knob: Min 0.003% @ +18Dbu (1Khz), Gain Knob: Min Hum & Noise: Equivalent Input Noise Of -128 Dbu (Mono Input Channel, Rs: 150Ω, Gain Knob: Max) Crosstalk: -88Db @ 1Khz. Mechanical And Electrical Specifications Chassis: The Unit Shall Be Housed In A Robust, Impact-Resistant, Powder-Coated Metal Chassis. Power Supply: External Ac Adapter: Pa-130 (120V 60Hz) Or Mu18 (100-240V 50/60Hz) Or Equivalent. Power Consumption Shall Be Approximately 12W. , Indoor Wi-Fi6 Access Point General System Requirements Type: The Unit Shall Be A High-Performance, High-Speed 11Ax (Wi-Fi 6) Indoor Dual-Band Ceiling-Mounted Wireless Access Point (Ap). Standard Support: The Wireless Access Point (Ap) Shall Strictly Adhere To The Ieee 802.11Ax (Wi-Fi 6) Standard. Radio Configuration: The Unit Must Be A High-Power Industrial Ceiling-Mounted Ap Featuring 2X2 Mimo Technology For Both 2.4 Ghz And 5 Ghz Bands. Performance: The System Must Provide A Combined Wireless Data Rate Of Up To 3 Gbps To Support High-Speed Applications Such As 4K/8K Streaming And Vr/Ar. User Capacity: The System Shall Support A High Density Of Users, Accommodating Up To 128 Concurrent Users (Max 64 Users Per Band). Advanced Features: The Ap Shall Support Multi-User Mimo (Mu-Mimo), Orthogonal Frequency Division Multiple Access (Ofdma), Bss Color Bit, And Dynamic Cca-Sd For Improved Interference Management. Hardware Specifications Chipset: The Ap Shall Be Equipped With A High-Performance 4-Core Qualcomm Chipset. Ram: 512Mb Ddr3. Antenna: Integrated Internal 4X4Dbi Dual-Band Mimo Antennas. Combined Rate: A Concurrent Wireless Rate Of Up To 3000 Mbps. Physical Interfaces: 1 X 10/100/1000Mbps Wan/Poe Port. 1 X 10/100/1000Mbps Lan Port. 1 X Reset Button. Provision For A Dc2.0 12V 1.5A Power Connector. Support For Power Over Ethernet (Poe) Following Ieee 802.3Af/802.3At Standards. Thermal Management: The Unit Shall Feature A Heat Sink With A Snap-On Structure And Special Surface Coating To Optimize Heat Dissipation. Indicators: Led Status Lights For Power, Cloud Connection, Lan Speed, 2.4Ghz Status, And 5.0Ghz Status. Audio & Network Management Quality Of Service: Must Support Wmm (Wireless Multimedia Prioritization). Roaming: Support For Seamless Roaming To Ensure Uninterrupted Connectivity For Mobile Clients. Deployment: Flexible Deployment Options Including Standalone Mode, Mobile App Management, And Zero Touch Provisioning (Ztp). Network Management: Support For Vlan Settings, Cloud Access (In Gateway Mode), And System Logging. Management: Support For Remote Configuration And Management. Maintenance: Features For Backup/Restore Configuration, Factory Reset, Scheduled Reboots, And Lifetime Firmware Upgrades. Security Requirements Encryption: Must Support Wi-Fi Protected Access 3 (Wpa3) And Wired Equivalent Privacy (Wep) 64-Bit, 128-Bit, And 156-Bit. Access Control: Integrated Mac Address Filtering And Wireless Access Control To Identify Authorized Devices. Management Security: Secure Socket Layer (Ssl) For Remote Management Login And The Ability To Block Ssid Broadcasting. Environmental & Reliability Operating Limits: Working Temperature: -10°C To 55°C. Storage Temperature: -40°C To 70°C. Humidity: 5% To 95% Non-Condensing. Protection: Esd: Air ±8K, Touch 6K. Electrical Surge: Common Mode 2K, Differential Mode 1K. Power Efficiency: Maximum Power Consumption Shall Not Exceed 16 Watts. Oem Warranty And Support Local Presence: The Original Equipment Manufacturer (Oem) Must Have An Authorized Service Center Or Registered Office In Madhya Pradesh (Proof Of Gst/Msme/Registration Required With Bid). Warranty: A 2-Year On-Site Hardware Replacement Warranty Is Required, With New Hardware Provided Within 12 Hours Of A Call Lock (No Refurbished Or Repaired Products). Technical Support: On-Site Support Must Be Available Within 6 Hours Of A Request. Future Warranty & Support: Oem Must Have Warranty And Support Pack Purchase Option Before Expiry Of Warranty Period For Next Years. Service Availability: The Oem Must Provide A 24X7 1800-Series Toll-Free Number With Support Available In The Local Hindi Language. Product Life Cycle: The Quoted Product Must Have A Life Cycle Of No Less Than 5 Years From The Date Of Supply, Including Lifetime Free Firmware And Technical Assistance. Certifications: The Product Must Be Ce, Fcc, Rohs, Iec 15408 And Iso 9001. Certified. Bidder Must Have To Submit Compliance On Oem Letter Head Along With Maf. , Network Wall Mount Rack Must Have To Supply And Installation Of 15U 500X550 Network Wall Mount Rack With Glass Door And Lock With Hardware, 6 Socket Industrial Pdu 15Amp With Mcb, Cable Manager, Fan, Hardware And Etc. , Goosneck Mic Cable, Speaker Cable In Meter, Installation And Accessories Complete Job Work With Required Cables, Frpvc Conduit, Accessories, Fitting, Installation And Etc.

Contract Date: Jun 09, 2026 Contract Value : ₹ 2.02 Lakh

Local Bodies No of Bidders 3

Madhya Pradesh View Result →

36.

Defence #11097521 AOC

Contract Date: Jun 20, 2026 Contract Value : ₹ 6.14 Crore

Statutory Bodies & Commissions/Committees No of Bidders 9

Ladakh View Result →

37.

Public Administrative Department #11076769 AOC

Contract Date: May 13, 2026 Contract Value : ₹ 1.21 Lakh

Government Departments No of Bidders 4

Kerala View Result →

38.

Power #11055259 AOC

Contract Date: May 11, 2026 Contract Value : ₹ 242.30 Crore

Government Departments No of Bidders 3

West Bengal View Result →

39.

Home Affairs #10977452 AOC

Contract Date: May 05, 2026 Contract Value : ₹ 1.04 Crore

Statutory Bodies & Commissions/Committees No of Bidders 10

West Bengal View Result →

40.

Home Affairs #10976727 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 11

West Bengal View Result →

41.

Railways #10975465 AOC

Supply Of Supply, Installation, Testing And Commissioning Of Induction Heatersupply, Installation, Testing And Commissioning Of Induction Heater,Supply, Installation, Testing And Commissioning Of Induction Heater 2.6 Kva With Micro Controller Based Control System Having Memory Back Up For Different Sizes Of Component S For Bearing Bore Diameter 20 To 300 Mm & Weight Not Exceeding More Than 40 Kgs Having F Ollowing Standard Accessories:- 1) Horizontal Yoke - 14 X 14 X 200 Mm - 01 No 2) Horizontal Y Oke - 20 X 20 X 220 Mm - 01 No 3) Horizontal Yoke - 40 X 45 X 220 Mm - 01 No 4) Magnetic Tempera Ture Probe - 01 No 5) Pair Of Hand Gloves, Heat Resistance - 01 Pair, Technical Specifications Required:- I) Data Storage - 1000 Jobs Ii) Infrared Remote 01 No Iii) Rewritable Programmer Fo R Memory Iv) Error Guide With Alarm For Reprogramming, To Be Procured Only From Past Proven Su Ppliers Of Same Item In Ir. (Warranty Period : Upto 30 Months From The Date Of Delivery) [ Warranty Perio D: 30 Months After The Date Of Delivery ] ]

Contract Date: May 06, 2026 Contract Value : ₹ 1.20 Lakh

Government Departments No of Bidders 1

Maharashtra View Result →

42.

Public Administrative Department #10956408 AOC

Tender For Ward No. 10, Mangire Mala Open Space To Mangwar Peth Road To Be Asphalted And Gutters To Be Constructed On Both Sides In Barshi.- 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 metre)by Mechanical Means.. 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means Grading-I, using Screening Type-B (11.2 milimetre Aggregate). 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means Grading-II(Using Screening Type-B (11.2 milimetreAggregate). 4 Providing and applying tack coat on the prepared surface heating by flames in boiler and spraying bitumenset footed in bitumen boiler on Black Top surface at 2.50 Kilogram per 10 Square Metre using VG-30 grade bulk bitumen. 5 Providing and constructing 75 milimetre thick ModifiedPenetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 milimetre stone metal layers 100% crusher broken metal with conical crusher plant, heating and spraying thebitumen of VG-30 grade at 2 kilogram per square metre, spreading 12 milimetre size chips compacting with three wheel static roller having weight 8 to 10 metric tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete including picking of existing WBM surface. 6 Providing and applying primer coat with bitumen emulsion on prepared surface of Granular Base including clearing of road surface and spraying primer at the rate of 0.60 kilogram/Square Metre using mechanical means. 7 Providing and Laying Open Graded premix surfacing20 milimetrethickness composed of 13.2 milimetreto 5.6 milimetre aggregates premixed with bituminous binder transported to site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction, using VG-30 bulk bitumen, Drum Mix type hot mix plant with Superwisery Control and Data Acquisition, Paver and Vibratoryroller over Modified Penetration Macadam surface. 8 Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials & bitumen of VG-30 gradepreparing existing road surface, heating and applying bitumen at the rate 0.98 kilogram per square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 metric tonne etc. complete. 9 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). 10 Providing and laying in situ/ Ready Mixcement concrete Mix-20of trap/ granite/quartzite/ gneissmetal for Reinforced Cement Concrete workin foundations like raft, strip foundations, grillage andfootings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, formwork, laying/ pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 11 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 12 Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic ControllerwithSuperwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 13 Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 14 Providing and laying Weep Holes of 100 milimetre diameter Asbestos Cement / PolyVenylChloride pipes as per drawing for abutment returns, return walls etc. complete. 15 Providing and laying cement concrete pipe ofIndian Standard458:2003 non pressure-2 classof 450 milimetrediameterin proper line, level and slope including providingandfixing collars in cement mortar 1:2 complete.

Contract Date: May 04, 2026 Contract Value : ₹ 46.72 Lakh

Local Bodies No of Bidders 3

Maharashtra View Result →

43.

Public Administrative Department #10955866 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 5

Maharashtra View Result →

44.

Educational and Research Institute #10908628 AOC

Notice Inviting E-Tender For Laboratory Setup For Vtcs Of Jhargram And Paschim Medinipur Districts Including Supply, Installation And Commissioning Of Tools/Equipment/Instruments Etc. For Implementation Of Vocational Education In West Bengal- 1 Hot air oven 2 Seed drill 3 Sealing machine 4 Soil Auger 5 BOD incubator 6 Sowing machine 7 Soil testing kit 8 Sprayer 9 Compound Microscope 10 Pressure cooker 11 Wheel hoe 12 EC meter 13 Measuring tape 14 Sleeve trier/Nobbe trier 15 Heater 16 Hose pipe 17 Spade 18 Hand leveller 19 Watering can 20 Moisture box 21 Sickle 22 Sickle 23 Grinding machine 24 Germinator 25 Four stroke petrol engine with CNG setup- working condition 26 Power tiller 27 Diesel Engine – CRDI - 4 stroke for Dismantling and Assembling with Swiveling Stand. 28 Riffle type divider 29 Model Tractor 30 Processing / Oil extraction machine ( Soxhlet Apparatus) 31 Dibbler 32 Sprayer 33 General Balance 34 Soil testing kit 35 Foot Sprayer 36 Wheel hoe 37 Measuring tape 38 Pruning shear 39 Hose pipe 40 Heater 41 Forester’s shear 42 Hand fork 43 Spade 44 Hedge shear 45 Crow-bar 46 Grass shear 47 Hand leveler 48 Pruning saw 49 Axe 50 Hand cultivator 51 Drainage hoe 52 Pruning knife 53 Garden trowel 54 Watering can 55 Sickle 56 Digging fork 57 Garden hand rake 58 Kurpi-Varvari 59 Iron peg , Field board 60 Grinding machine ( turmeric powder and seed spices powder) 61 Aluminium oil extraction unit large ( for lemon grass & citronella) 62 Pouch sealing machine 63 Pilfer proof cap sealing machine 64 Hand refractometer 65 Weeder 66 Soil testing kit 67 Moisture meter 68 General Balance 69 Foot Sprayer 70 Salometer 71 Brix hydrometer 72 Electrically operated mixer cum grinder 73 Measuring tape 74 Knife Set 75 Heater 76 Hose pipe 77 Vegetable slicer, Potato slicer, Pineapple slicer 78 Spade 79 Hand leveler 80 Axe (Local made) 81 Pruning Secateur 82 Watering can 83 Fruit Tree Picking Pole with Basket 84 Sickle 85 Pulper 86 Cabinet dryer 87 Crusher 88 Autoclave (Laboratory type) 89 Spiral or screw type juice extractor. 90 Can sealer or double seamer 91 Water distillation unit 92 Wheelbarrow 93 Can vacuum testing gauge 94 Hand operated metal grinder 95 Washing machine 96 AC Motor Trainer Kit 97 Mixer cum grinder 98 Soldering & De-soldering Station 99 Megger 100 Geyser 101 ½ HP Induction motor Three Phase 102 Wooden Panel board with following accessories 103 Electric Power Drill 104 Clamp On Meter 105 Vacuum cleaner 106 Multimeter 107 ¼ HP Induction motor Single Phase 108 TPIC with Neutral main switch 109 Hand Drill Machine Electric with Hammer Action 110 Single phase Energy meter 111 Sodium vapour lamp 112 Mercury vapour lamp 113 Steam iron automatic 114 Electric rice cooker 115 DOL starter 116 Adjustable wrench 117 Screw driver set 118 M.C.B 119 Bench Vice 120 Wooden Board for wiring 121 Insulated Combination Plier (Heavy Duty ) 122 DPIC main switch 123 Spanner set 124 Cable cutting pliers 125 Analog multi-meter 126 DOL starter 127 Cutting pliers 128 Tools maker vice 129 Soldering iron 130 Crimping tool(pliers) 131 Ring Spanner 132 Screw driver set 133 Precision set of screwdrivers 134 M.C.B 135 Adjustable wrench 136 Hacksaw frame adjustable 137 De-soldering pump electrical heated, manual operators 138 Insulated combination pliers 139 Insulated side cutting pliers 140 Insulated screw driver 141 Insulated Combination Plier (Heavy Duty ) 142 Earthing rod with chain, Fish Wire 143 Electric bell 144 File flat second cut 145 Distribution box 4-way 146 File flat bastard 147 Handsaw 450mm 148 Soldering Iron Changeable bits 149 Ball Pin Hammer 150 Spirit level 151 3-pin 16A wall socket, flush type 152 Plier-Flat Nose 153 File flat smooth 154 3-pin 16A wall socket, mounting type 155 Ceiling rose 6A, 250V 2plate 156 Chisel-Cold-Flat 157 Fuse 158 Hammer ball pen 159 Fan regulator 160 3-pin 6A wall socket, flush type 161 Continuity tester 162 Hacksaw with frame adjustable 163 Wooden saw 164 Combined LED or fluorescent tube 165 Fuse 166 Standard wire gauge 167 I.C.T.P. switch16A 400V 168 S.P. switch 6A, 250 V mounting type two-way 169 S.P. switch flush type two way 170 3-pin 6A wall socket ,mounting type 171 2-pin 6A wall socket, flush type 172 I.C.D.P. switch16A250V 173 I.C. cut out 16A, 250V 174 Intermediate switch 6A, 250V 175 2-pin 6A mounting type 176 S.P. switch 6A, 250V mounting type single way 177 Kit-kat fuse 178 Kit-kat fuse 179 S.P. switch flush type, single way 180 3-pin16A 250V plug 181 Bell-Push/switch 6A, 250V mounting type 182 HRC Fuse-16A 183 PVC Cu wire 184 Terminal plate 16A 250 V3-way 185 Bell-Push / switch 6A, 250V flush type 186 GI junction box-1,2,3&4way square type 187 Bakelite pendent-holder 188 3-pin 6A 250V plug 189 Toggle switch 6A 190 Neutral link 16a mps 191 GI conduit pipe 192 PVC Channel 193 PVC pipe coupling 194 PVC junction box-1,2,3 and 4 way 195 PVC bend 196 PVC Elbow 197 PVC Tee 198 GI conduit coupler & Inspection Coupler 199 GI Elbow & Inspection Elbow 200 Tees & Inspection Tee 201 PVC Casing for wiring 202 PVC conduit pipe 203 Solar Photo-voltaic Cell : Solar power generation 204 Storage Battery 205 Complete set up of Single crystalline silicon PV Cell 206 Pyranometer 207 Solar street lighting 208 Solar home lighting system with all necessary components for student demonstration 209 Data logger 210 Concentrated solar collector 211 Flat type solar collector 212 Solar cooker 213 PVC / XLPE low tension cable jointing kit 214 D.C shunt Motor 215 Three phase Energy meter 216 Voltage Stabilizer 217 Room Heater 218 4-point starter 219 Tools makers vice 220 Tubular box spanner 221 Magneto spanner set 222 LED lamp 223 Allenkey set (Hexagonal set of 9) 224 Insulator model a) Pin type 225 Insulator model b) Strain type 226 Insulator model c) Disc type 227 Round Nose pliers 100mm 228 Round Nose pliers 2no. of set 229 Connecting screwdriver 100mm 230 Steel rule graduated both in Metric and English Unit 300mm 231 Long Nose pliers8 232 Micrometer 233 Steel measuring tape 3 meters 234 Hammer ball pen 500 grams 235 Neon tester 500V 236 PVC cable & XLPE cable 4 core, 3 & ½ core in m 237 Iron connector-5A, 250V 238 Digital compression testing machine 239 Theodolite transit latest model with all accessories 240 Aggregate impact tester with cylindrical cup and measuring cylinder 241 Auto level latest model with all accessories 242 Hand GPS-latest version 243 Mortar cube vibrator 244 Aggregate Crushing Value Apparatus 245 Concrete mixer 246 Dumpy level 247 Manual bar bending machine of suitable size 248 Bulk density apparatus (Cylindrical measure for fine aggregate and coarse aggregate ) 249 Turbidity Test Kit 250 Power cutter of suitable size 251 Box sextant 252 Planimeter Digital 253 Plane table with stand, accessories & water proofing Cover 254 Weighing plateform digital 255 Vicat apparatus with plunger, needles and mould 256 Standard IS sand 257 Oven Small Size 258 Electronic balance 259 Tile cutter 260 Bar bending table 261 Drill and bit set 262 Ratchet rack : with post and clamp flat 5 drill 6 to 35 mm by 0.2 mm. 263 Mortar board : 2000x2000 264 Metal cross staff- box type 265 Telescopic alidade 266 Slump test apparatus with temping rod 267 Water testing kit – for ph value 268 Thickness and length gauges (Elongation and Flakiness Index) 269 Plumbers metal melting pot 270 Metal cross staff- open type 271 Ratchet pipe die : 15 mm to 32 mm 272 Tap and die set to cut BSP Thread 273 Height indicators 274 Metric chain : 30 m & 20 m 275 Prismatic compass with stand and all accessories 276 Chain pipe wrenches : 90 mm-650 mm 277 Engineers chain 278 Sieve for sand in adjustable stand : 1mm, 100cm x 60cm fixed in steel frame 279 Optical square 280 Mortar board : 2 mtx2 mt. 281 Slump Cone 282 IS Brass sieves - set 283 Stillson pattern pipe wrenches : 450 mm to take pipe up to 52 mm dia. 284 Pipe vice to grip pipes up to : 77mm 285 Drawing Board : 1000mmx700mm 286 Brushes for painting 287 Leveling st-4M 288 Ranging rod Steel-2M 289 Offset rod : 2M 290 Measuring cylinder : set of 100 ml., 500 m., 1000 ml. 291 Pick axe 292 Pyconometer for specific gravity 293 Pickaxe. 294 Le Chatelier Mould (for soundness test of cement) 295 Survey plotting scale : 8 scales with offset scale in box 296 Mason square : 30x60 cm 297 Tenon saw, dovetail saw 298 Le Chateliers flask (For specific gravity test of cement) 299 Monkey Plier (gas pliers) 300 Aluminum float 301 Tool caulking 302 Flat Smithy tong. 303 Saw plumber : 300mm 304 Stop watch Digital 305 Screw driver Set 306 Land measuring steel tape 30 Meter long 307 Brick hammer with handle 308 Crow bar : 30mm dia. 1.5 m long of mild steel 309 Cube mould : 150mm Size 310 Spanner monkey up to 50 mm 311 Stilson wrench : 200 & 350 mm 312 Land measuring plastic tape : 30 mt long 313 Shovel 314 Spade 315 Telescopic pipes / props 316 Mason plumb rule with spirit Level 317 Trowel : 25 cmx10cm 318 Plumb rule and Bob 319 Non porous plate 320 Graduated cylinder 321 Adjustable spanner : A375 322 Double face hammers 323 Hacksaw frame adjustable : 250 to 300 mm 324 Level spirit wooden : 300mm 325 M.S pan : 45CM Dia. 326 Bucket G.i. : 35 CM Dia. 327 Sprit level : 30cm long 328 Bolster 329 Bevel 330 Wooden mallet 331 Gauging trowel 332 Sampling scoops : 2kg and 5 kg 333 Plumbers ladle 334 Trowel 125 335 Farma of mild steel for measuring aggregate : Heaving volume 0.03472 cm 336 Masonry grinder 337 Cutter, pipe wheel type : 6 mm to 25 mm 338 Caliper outside : 150mm 339 Steel tapes : 5 Meter long 340 Hammer ball peen : 800gms. 341 Cutting pliers 342 Inside caliper : 150mm 343 pointing Trowel : 6 344 Steel float 345 Measuring tape : 15 Meter long (Steel) 346 Bar bending lever (suitable diameter and length) : In m 347 Float wooden 348 Chisel : different sizes 349 Plumb bob : 50gms. 350 Bending pipes (suitable diameter and length) : In M 351 Line pin corner block 352 Wire brushes 353 Bending pipes : suitable dia& length in m 354 Total station latest model with all accessories 355 DGPS-latest version 356 Motorised sieve shaker 357 Floor polishing machine 358 Concrete vibrator : pin type & plate type 359 Electric drilling machine : 6 to 35 mm by 0.2 mm. for drilling 360 Power operated cutting machine 361 Vibrating machine : 12000 ± 400 rpm 362 Portable hand bender of suitable size 363 Spray painting machine 364 Drums : 200 liters capacity 365 Polishing machine 366 Abney level 367 Electric heater 368 Computing scales five hectares 369 Gunters chain 370 Offset scale for cadastral survey 371 Computing scales two hectares 372 Indian pattern clinometers 373 Telescopic/ adjustable spans 374 Straight edge 375 Steel / plywood shuttering plates 376 Hammer 5 kg 377 Water tube : 6m 378 Hammer 1 kg 379 Magnifying glass 380 Marking rope & thread : 15m 381 Chisel cold flat : 20 x 250 mm 382 File flat rough : 300mm 383 Four stroke petrol engine with CNG setup-working Condition 384 Diesel Engine – CRDI - 4 stroke for Dismantling and Assembling with Swiveling Stand. 385 Disk brake in working condition with caliper assembly with all parts 386 Drum brake assembly in Working Condition 387 Cut section working model of automatic transmission Gear box 388 Radiator cut section-cross flow 389 Cut section working model of Single plate clutch Assembly 390 Cut section of cross ply and radial tyres 391 Tyre pressure gauge with holding nipple 392 Vernier caliper : 0-300 mm with least count 0.02mm 393 Different type of piston model : 3 Different Types on board 394 Spanner, ring set of 12 : 6 to 32 mm. (metric) 395 Philips Screw Driver set of 5 pieces : 100 mm to 300 mm 396 Fuel feed pump for Diesel : Hand operated Plunger Type 397 Piston ring compressor 398 Piston Ring expander and remover. 399 Outside micrometer : 0-25mm 400 Automotive oil pump for dismantling and assembling 401 Valve Lifter 402 Carburetor – Solex : Solex for dismantling and assembling 403 Caliper inside with spring : 15cm 404 Calipers outside with spring : 15cm 405 Pliers combination : 20cm 406 Gasket Cutter : 5-35mm 407 Circlip pliers Expanding and contracting : 15cm 408 Dividers with spring : 15cm 409 Hammer Ball Peen : 0.75kg 410 Hammer Mallet 411 Hammer Plastic 412 Feeler gauge 20 blades (metric) 413 Hydraulic jack HI-LIFT type : 3 Ton Capacity 414 Two wheeler (refurbished) 415 Demonstration board of MPFI system : With injectors, rail, inlet manifold, throttle body, distributor, ECU, purge valve, sensor, crank pulley, fuel tank module. 416 Work bench : 250 x 120 x 60 cm with 4 vices 12cm Jaw 417 Torque wrenches set : 5-35 Nm, 12-68 Nm & 50-225 Nm 418 Battery –charger : Capable to charge batteries from 5AH – 150AH. 419 Battery –charger : Capable to charge batteries from 5AH – 150AH. 420 Spanners socket with speed handle, T-bar, ratchet and universal set of 28 pieces with box : up to 32 mm 421 Spanner D.E. set of 12 pieces : 6mm to 32mm 422 Steel tool box with lock and key (folding type) : 400x200x150 mm 423 Allen Key set of 12 pieces : 2mm to 14mm 424 Grease Gun 425 Electric Soldering Iron : 230 V 60 watts – 230 V 25 watts 426 Hacksaw frame adjustable : 20-30 cm 427 Hammer ball peen with handle : 0.5kg. 428 Electrician Screw Driver : 250mm 429 Flat File , second cut 25cm 430 File flat , bastard : 20cm 431 Hands file for Second cut flat : 20cm 432 Spanner, adjustable : 15cm 433 Scriber : 15cm 434 Test Jig box : PCB Jig Box, 220V, Dimension: 1.5x1x1 Feet 435 Different models of Water purifier, Microwave oven : set 436 Inverter set with stabilizer, battery charger, step down transformer : set. 437 Bonding machine 438 Different models of LED and LCD TV receiver 439 LCD Tester 440 SMD rework station 441 Soldering Station : Temp range: 200~480degC, Temp stability: +-2degC,Max power: 60W, Tip Compatibility: 900M Series, Inputvoltage: AC220V / 50 Hz 442 Battery tester : 2Ah-220Ah Internal Resistance Tester Accurate Digital Auto Battery Analyzer Digital Battery Tester 443 Bench power supply 444 Screwdriver set, tweezers, nose pliers, wire cutters etc. : in set. 445 PPM meter 446 Digital Multimeter (Black 2000 Counts) 447 SMD tester 448 Hot air gun 449 TDS meter 450 Soldering Iron : Soldering Iron 60W, Soldering Gun Solder Weld Welding Iron Tool 160-240 V 451 De soldering pump, 452 Dual CRO 30 MHz 453 Micro wave power meter 454 LED Magnifying Lamp, 220-240V 455 Electrical drill machine 456 BIOS programmer 457 Antistatic Mat (ESD Mat) : Electromark Esd Mat 6.5 X 2 Feet, Blue for static charge Dissipation 458 Hot air blower : 1500W Heat Gun cum Hot Air Blower with Dual Temperature Control 459 Back light Tester 460 Battery Booster : 12 volt dc adapter, 12V, Adapter, adaptor, battery booster 461 PTC heating element 462 Setter Hatcher Machine 463 Wt. Balance 464 Simple microscope 465 Chaff cutter 466 Vaccines as- RD, GD, IBD, Fowl Pox etc.Vaccinator, & First aid kit etc. 467 Rake, Fan, Litter material 468 Trevis/Crate 469 Milking machine 470 Sprayer 471 Poultry feeder, Drinker, water Heater 472 Postmortem set 473 Brooder, Brooder Guard & Hover 474 Mixer Grinder 475 veterinarians stethoscope 476 Thermometer 477 Haemometer 478 Setter Hatcher Machine 479 Aerator 480 Vaccines as- RD, GD, IBD, Fowl Pox etc. Vaccinator, & First aid kit etc.

Contract Date: Jan 16, 2026 Contract Value : ₹ 1.02 Crore

Government Departments No of Bidders 6

West Bengal View Result →

45.

Housing Urban and Rular Development #10908306 AOC

Contract Date: Apr 29, 2026 Contract Value : ₹ 2.65 Crore

Government Departments No of Bidders 1

Maharashtra View Result →

46.

Health and Family Welfare #10901538 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Kerala View Result →

47.

Civil Aviation #10893432 AOC

Bids Are invited for Ip Day Night 2Mp Fixed Dome Camera Indoor - Camera With Brackets Mount As Per Site Requirement And Specifications Mentioned Intender Document , Ip Day Night 2Mp Fixed Bullet Camera Outdoor - Camera With Brackets Mount As Per Site Requirement And Specifications Mentioned In Tender Document , 64 Ch 4K Nvr With 21 Inch Monitor Keyboard Mouse With Hdd - Hdd Having Storage Capacity Of 30 Days For Each Camera As Per Specifications Mentioned In Tender Document , 32 Ch 4K Nvr With Hdd - Hdd Having Storage Capacity Of 30 Days For Each Camera As Per Specifications Mentioned In Tender Document , 24 Port Layer 2 Poe Switch - With 4 Sfp Ports With Fully Populated Sfp Modules As Per Specifications Mentioned In Tender Document , 46 Inch To 54 Inch Led Data Wall Display Wall Mount , 5 Kva Rack Mountable Ups - Ups With Minimum 30 Mins Back Up And As Per Specifications Mentioned In Tender Document , 19 Inch 24U Floor Mounted Network Rack , 6U Wall Mount Pole Mount Network Rack , Liu 6 Port Rack Mountable , 3 Core 2.5 Sq. Mm Armoured Copper Power Cable , 3 Core 6 Sq. Mm Unarmoured Copper Power Cable , 6 Core Single Mode Armoured Fiber Optic Cable , Hdmi Cable 3 Mtrs With Connectors , Hdmi Cable 15 Mtrs , Cat 6 Utp Armoured Cable , Cat 6 Flat Cable For Elevator , 3 Inch Pvc Casing , Fibre Optic Patch Cord , Cat 6 Patch Cord 1M , 32 Amp Double Pole Mcb , 16 Amp Power Socket With Double Pole Mcb 16A , 6 Amp Power Socket With Double Pole Mcb 6A , Rack Mountable Kvm Switch - With 3 Nos Of Hdmi Ports As Per Specifications Mentioned In Tender Document , 1 Ton Split Air Conditioner Industrial Grade , Installation Testing Training And Commissioning - Sitc Total Quantity : 1396

Contract Date: Ref. Documents Contract Value : ₹ 12.42 Lakh

Boards / Undertakings / PSU No of Bidders 8

Maharashtra View Result →

48.

Petroleum and Natural Gas #10873741 AOC

Bids Are Invited For Custom Bid for Services - TAS logic Modification for Critical data back-up and AND OR Logic implementation in radar gauges at IOCL Rangpo Depot Customized Amccmc For Pre-Owned Products Software & TAS logic Modification for Critical data back-up at HO server and implementation of AND-OR logics to both Secondary & Primary radar parallelly at RANGPO DEPOT, WBSO Total Quantity :

Contract Date: Ref. Documents Contract Value : ₹ 6.04 Lakh

Boards / Undertakings / PSU No of Bidders 1

West Bengal View Result →

49.

Defence #10861312 AOC

Contract Date: Apr 27, 2026 Contract Value : ₹ 32.04 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Maharashtra View Result →

50.

Road Transport and Highways #10855842 AOC

Contract Date: Ref. Documents Contract Value : ₹ 2.22 Crore

Government Departments No of Bidders 4

Maharashtra View Result →

TenderDetail

Loading tenders